| /* |
| * Node information (ConfigROM) collection and management. |
| * |
| * Copyright (C) 2000 Andreas E. Bombe |
| * 2001-2003 Ben Collins <bcollins@debian.net> |
| * |
| * This code is licensed under the GPL. See the file COPYING in the root |
| * directory of the kernel sources for details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/config.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/smp_lock.h> |
| #include <linux/interrupt.h> |
| #include <linux/kmod.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/moduleparam.h> |
| #include <asm/atomic.h> |
| |
| #include "ieee1394_types.h" |
| #include "ieee1394.h" |
| #include "ieee1394_core.h" |
| #include "hosts.h" |
| #include "ieee1394_transactions.h" |
| #include "highlevel.h" |
| #include "csr.h" |
| #include "nodemgr.h" |
| |
| static int ignore_drivers; |
| module_param(ignore_drivers, int, 0444); |
| MODULE_PARM_DESC(ignore_drivers, "Disable automatic probing for drivers."); |
| |
| struct nodemgr_csr_info { |
| struct hpsb_host *host; |
| nodeid_t nodeid; |
| unsigned int generation; |
| unsigned int speed_unverified:1; |
| }; |
| |
| |
| static char *nodemgr_find_oui_name(int oui) |
| { |
| #ifdef CONFIG_IEEE1394_OUI_DB |
| extern struct oui_list_struct { |
| int oui; |
| char *name; |
| } oui_list[]; |
| int i; |
| |
| for (i = 0; oui_list[i].name; i++) |
| if (oui_list[i].oui == oui) |
| return oui_list[i].name; |
| #endif |
| return NULL; |
| } |
| |
| /* |
| * Correct the speed map entry. This is necessary |
| * - for nodes with link speed < phy speed, |
| * - for 1394b nodes with negotiated phy port speed < IEEE1394_SPEED_MAX. |
| * A possible speed is determined by trial and error, using quadlet reads. |
| */ |
| static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr, |
| quadlet_t *buffer) |
| { |
| quadlet_t q; |
| u8 i, *speed, old_speed, good_speed; |
| int ret; |
| |
| speed = ci->host->speed + NODEID_TO_NODE(ci->nodeid); |
| old_speed = *speed; |
| good_speed = IEEE1394_SPEED_MAX + 1; |
| |
| /* Try every speed from S100 to old_speed. |
| * If we did it the other way around, a too low speed could be caught |
| * if the retry succeeded for some other reason, e.g. because the link |
| * just finished its initialization. */ |
| for (i = IEEE1394_SPEED_100; i <= old_speed; i++) { |
| *speed = i; |
| ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, |
| &q, sizeof(quadlet_t)); |
| if (ret) |
| break; |
| *buffer = q; |
| good_speed = i; |
| } |
| if (good_speed <= IEEE1394_SPEED_MAX) { |
| HPSB_DEBUG("Speed probe of node " NODE_BUS_FMT " yields %s", |
| NODE_BUS_ARGS(ci->host, ci->nodeid), |
| hpsb_speedto_str[good_speed]); |
| *speed = good_speed; |
| ci->speed_unverified = 0; |
| return 0; |
| } |
| *speed = old_speed; |
| return ret; |
| } |
| |
| static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, |
| void *buffer, void *__ci) |
| { |
| struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci; |
| int i, ret; |
| |
| for (i = 1; ; i++) { |
| ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, |
| buffer, length); |
| if (!ret) { |
| ci->speed_unverified = 0; |
| break; |
| } |
| /* Give up after 3rd failure. */ |
| if (i == 3) |
| break; |
| |
| /* The ieee1394_core guessed the node's speed capability from |
| * the self ID. Check whether a lower speed works. */ |
| if (ci->speed_unverified && length == sizeof(quadlet_t)) { |
| ret = nodemgr_check_speed(ci, addr, buffer); |
| if (!ret) |
| break; |
| } |
| if (msleep_interruptible(334)) |
| return -EINTR; |
| } |
| return ret; |
| } |
| |
| static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) |
| { |
| return (CSR1212_BE32_TO_CPU(bus_info_data[2]) >> 8) & 0x3; |
| } |
| |
| static struct csr1212_bus_ops nodemgr_csr_ops = { |
| .bus_read = nodemgr_bus_read, |
| .get_max_rom = nodemgr_get_max_rom |
| }; |
| |
| |
| /* |
| * Basically what we do here is start off retrieving the bus_info block. |
| * From there will fill in some info about the node, verify it is of IEEE |
| * 1394 type, and that the crc checks out ok. After that we start off with |
| * the root directory, and subdirectories. To do this, we retrieve the |
| * quadlet header for a directory, find out the length, and retrieve the |
| * complete directory entry (be it a leaf or a directory). We then process |
| * it and add the info to our structure for that particular node. |
| * |
| * We verify CRC's along the way for each directory/block/leaf. The entire |
| * node structure is generic, and simply stores the information in a way |
| * that's easy to parse by the protocol interface. |
| */ |
| |
| /* |
| * The nodemgr relies heavily on the Driver Model for device callbacks and |
| * driver/device mappings. The old nodemgr used to handle all this itself, |
| * but now we are much simpler because of the LDM. |
| */ |
| |
| static DECLARE_MUTEX(nodemgr_serialize); |
| |
| struct host_info { |
| struct hpsb_host *host; |
| struct list_head list; |
| struct completion exited; |
| struct semaphore reset_sem; |
| int pid; |
| char daemon_name[15]; |
| int kill_me; |
| }; |
| |
| static int nodemgr_bus_match(struct device * dev, struct device_driver * drv); |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, |
| char *buffer, int buffer_size); |
| static void nodemgr_resume_ne(struct node_entry *ne); |
| static void nodemgr_remove_ne(struct node_entry *ne); |
| static struct node_entry *find_entry_by_guid(u64 guid); |
| |
| struct bus_type ieee1394_bus_type = { |
| .name = "ieee1394", |
| .match = nodemgr_bus_match, |
| }; |
| |
| static void host_cls_release(struct class_device *class_dev) |
| { |
| put_device(&container_of((class_dev), struct hpsb_host, class_dev)->device); |
| } |
| |
| struct class hpsb_host_class = { |
| .name = "ieee1394_host", |
| .release = host_cls_release, |
| }; |
| |
| static void ne_cls_release(struct class_device *class_dev) |
| { |
| put_device(&container_of((class_dev), struct node_entry, class_dev)->device); |
| } |
| |
| static struct class nodemgr_ne_class = { |
| .name = "ieee1394_node", |
| .release = ne_cls_release, |
| }; |
| |
| static void ud_cls_release(struct class_device *class_dev) |
| { |
| put_device(&container_of((class_dev), struct unit_directory, class_dev)->device); |
| } |
| |
| /* The name here is only so that unit directory hotplug works with old |
| * style hotplug, which only ever did unit directories anyway. */ |
| static struct class nodemgr_ud_class = { |
| .name = "ieee1394", |
| .release = ud_cls_release, |
| .uevent = nodemgr_uevent, |
| }; |
| |
| static struct hpsb_highlevel nodemgr_highlevel; |
| |
| |
| static void nodemgr_release_ud(struct device *dev) |
| { |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); |
| |
| if (ud->vendor_name_kv) |
| csr1212_release_keyval(ud->vendor_name_kv); |
| if (ud->model_name_kv) |
| csr1212_release_keyval(ud->model_name_kv); |
| |
| kfree(ud); |
| } |
| |
| static void nodemgr_release_ne(struct device *dev) |
| { |
| struct node_entry *ne = container_of(dev, struct node_entry, device); |
| |
| if (ne->vendor_name_kv) |
| csr1212_release_keyval(ne->vendor_name_kv); |
| |
| kfree(ne); |
| } |
| |
| |
| static void nodemgr_release_host(struct device *dev) |
| { |
| struct hpsb_host *host = container_of(dev, struct hpsb_host, device); |
| |
| csr1212_destroy_csr(host->csr.rom); |
| |
| kfree(host); |
| } |
| |
| static int nodemgr_ud_platform_data; |
| |
| static struct device nodemgr_dev_template_ud = { |
| .bus = &ieee1394_bus_type, |
| .release = nodemgr_release_ud, |
| .platform_data = &nodemgr_ud_platform_data, |
| }; |
| |
| static struct device nodemgr_dev_template_ne = { |
| .bus = &ieee1394_bus_type, |
| .release = nodemgr_release_ne, |
| }; |
| |
| struct device nodemgr_dev_template_host = { |
| .bus = &ieee1394_bus_type, |
| .release = nodemgr_release_host, |
| }; |
| |
| |
| #define fw_attr(class, class_type, field, type, format_string) \ |
| static ssize_t fw_show_##class##_##field (struct device *dev, struct device_attribute *attr, char *buf)\ |
| { \ |
| class_type *class; \ |
| class = container_of(dev, class_type, device); \ |
| return sprintf(buf, format_string, (type)class->field); \ |
| } \ |
| static struct device_attribute dev_attr_##class##_##field = { \ |
| .attr = {.name = __stringify(field), .mode = S_IRUGO }, \ |
| .show = fw_show_##class##_##field, \ |
| }; |
| |
| #define fw_attr_td(class, class_type, td_kv) \ |
| static ssize_t fw_show_##class##_##td_kv (struct device *dev, struct device_attribute *attr, char *buf)\ |
| { \ |
| int len; \ |
| class_type *class = container_of(dev, class_type, device); \ |
| len = (class->td_kv->value.leaf.len - 2) * sizeof(quadlet_t); \ |
| memcpy(buf, \ |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(class->td_kv), \ |
| len); \ |
| while ((buf + len - 1) == '\0') \ |
| len--; \ |
| buf[len++] = '\n'; \ |
| buf[len] = '\0'; \ |
| return len; \ |
| } \ |
| static struct device_attribute dev_attr_##class##_##td_kv = { \ |
| .attr = {.name = __stringify(td_kv), .mode = S_IRUGO }, \ |
| .show = fw_show_##class##_##td_kv, \ |
| }; |
| |
| |
| #define fw_drv_attr(field, type, format_string) \ |
| static ssize_t fw_drv_show_##field (struct device_driver *drv, char *buf) \ |
| { \ |
| struct hpsb_protocol_driver *driver; \ |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); \ |
| return sprintf(buf, format_string, (type)driver->field);\ |
| } \ |
| static struct driver_attribute driver_attr_drv_##field = { \ |
| .attr = {.name = __stringify(field), .mode = S_IRUGO }, \ |
| .show = fw_drv_show_##field, \ |
| }; |
| |
| |
| static ssize_t fw_show_ne_bus_options(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct node_entry *ne = container_of(dev, struct node_entry, device); |
| |
| return sprintf(buf, "IRMC(%d) CMC(%d) ISC(%d) BMC(%d) PMC(%d) GEN(%d) " |
| "LSPD(%d) MAX_REC(%d) MAX_ROM(%d) CYC_CLK_ACC(%d)\n", |
| ne->busopt.irmc, |
| ne->busopt.cmc, ne->busopt.isc, ne->busopt.bmc, |
| ne->busopt.pmc, ne->busopt.generation, ne->busopt.lnkspd, |
| ne->busopt.max_rec, |
| ne->busopt.max_rom, |
| ne->busopt.cyc_clk_acc); |
| } |
| static DEVICE_ATTR(bus_options,S_IRUGO,fw_show_ne_bus_options,NULL); |
| |
| |
| static ssize_t fw_show_ne_tlabels_free(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct node_entry *ne = container_of(dev, struct node_entry, device); |
| return sprintf(buf, "%d\n", atomic_read(&ne->tpool->count.count) + 1); |
| } |
| static DEVICE_ATTR(tlabels_free,S_IRUGO,fw_show_ne_tlabels_free,NULL); |
| |
| |
| static ssize_t fw_show_ne_tlabels_allocations(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct node_entry *ne = container_of(dev, struct node_entry, device); |
| return sprintf(buf, "%u\n", ne->tpool->allocations); |
| } |
| static DEVICE_ATTR(tlabels_allocations,S_IRUGO,fw_show_ne_tlabels_allocations,NULL); |
| |
| |
| static ssize_t fw_show_ne_tlabels_mask(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct node_entry *ne = container_of(dev, struct node_entry, device); |
| #if (BITS_PER_LONG <= 32) |
| return sprintf(buf, "0x%08lx%08lx\n", ne->tpool->pool[0], ne->tpool->pool[1]); |
| #else |
| return sprintf(buf, "0x%016lx\n", ne->tpool->pool[0]); |
| #endif |
| } |
| static DEVICE_ATTR(tlabels_mask, S_IRUGO, fw_show_ne_tlabels_mask, NULL); |
| |
| |
| static ssize_t fw_set_ignore_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); |
| int state = simple_strtoul(buf, NULL, 10); |
| |
| if (state == 1) { |
| down_write(&dev->bus->subsys.rwsem); |
| device_release_driver(dev); |
| ud->ignore_driver = 1; |
| up_write(&dev->bus->subsys.rwsem); |
| } else if (!state) |
| ud->ignore_driver = 0; |
| |
| return count; |
| } |
| static ssize_t fw_get_ignore_driver(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); |
| |
| return sprintf(buf, "%d\n", ud->ignore_driver); |
| } |
| static DEVICE_ATTR(ignore_driver, S_IWUSR | S_IRUGO, fw_get_ignore_driver, fw_set_ignore_driver); |
| |
| |
| static ssize_t fw_set_destroy_node(struct bus_type *bus, const char *buf, size_t count) |
| { |
| struct node_entry *ne; |
| u64 guid = (u64)simple_strtoull(buf, NULL, 16); |
| |
| ne = find_entry_by_guid(guid); |
| |
| if (ne == NULL || !ne->in_limbo) |
| return -EINVAL; |
| |
| nodemgr_remove_ne(ne); |
| |
| return count; |
| } |
| static ssize_t fw_get_destroy_node(struct bus_type *bus, char *buf) |
| { |
| return sprintf(buf, "You can destroy in_limbo nodes by writing their GUID to this file\n"); |
| } |
| static BUS_ATTR(destroy_node, S_IWUSR | S_IRUGO, fw_get_destroy_node, fw_set_destroy_node); |
| |
| static int nodemgr_rescan_bus_thread(void *__unused) |
| { |
| /* No userlevel access needed */ |
| daemonize("kfwrescan"); |
| |
| bus_rescan_devices(&ieee1394_bus_type); |
| |
| return 0; |
| } |
| |
| static ssize_t fw_set_rescan(struct bus_type *bus, const char *buf, size_t count) |
| { |
| int state = simple_strtoul(buf, NULL, 10); |
| |
| /* Don't wait for this, or care about errors. Root could do |
| * something stupid and spawn this a lot of times, but that's |
| * root's fault. */ |
| if (state == 1) |
| kernel_thread(nodemgr_rescan_bus_thread, NULL, CLONE_KERNEL); |
| |
| return count; |
| } |
| static ssize_t fw_get_rescan(struct bus_type *bus, char *buf) |
| { |
| return sprintf(buf, "You can force a rescan of the bus for " |
| "drivers by writing a 1 to this file\n"); |
| } |
| static BUS_ATTR(rescan, S_IWUSR | S_IRUGO, fw_get_rescan, fw_set_rescan); |
| |
| |
| static ssize_t fw_set_ignore_drivers(struct bus_type *bus, const char *buf, size_t count) |
| { |
| int state = simple_strtoul(buf, NULL, 10); |
| |
| if (state == 1) |
| ignore_drivers = 1; |
| else if (!state) |
| ignore_drivers = 0; |
| |
| return count; |
| } |
| static ssize_t fw_get_ignore_drivers(struct bus_type *bus, char *buf) |
| { |
| return sprintf(buf, "%d\n", ignore_drivers); |
| } |
| static BUS_ATTR(ignore_drivers, S_IWUSR | S_IRUGO, fw_get_ignore_drivers, fw_set_ignore_drivers); |
| |
| |
| struct bus_attribute *const fw_bus_attrs[] = { |
| &bus_attr_destroy_node, |
| &bus_attr_rescan, |
| &bus_attr_ignore_drivers, |
| NULL |
| }; |
| |
| |
| fw_attr(ne, struct node_entry, capabilities, unsigned int, "0x%06x\n") |
| fw_attr(ne, struct node_entry, nodeid, unsigned int, "0x%04x\n") |
| |
| fw_attr(ne, struct node_entry, vendor_id, unsigned int, "0x%06x\n") |
| fw_attr_td(ne, struct node_entry, vendor_name_kv) |
| fw_attr(ne, struct node_entry, vendor_oui, const char *, "%s\n") |
| |
| fw_attr(ne, struct node_entry, guid, unsigned long long, "0x%016Lx\n") |
| fw_attr(ne, struct node_entry, guid_vendor_id, unsigned int, "0x%06x\n") |
| fw_attr(ne, struct node_entry, guid_vendor_oui, const char *, "%s\n") |
| fw_attr(ne, struct node_entry, in_limbo, int, "%d\n"); |
| |
| static struct device_attribute *const fw_ne_attrs[] = { |
| &dev_attr_ne_guid, |
| &dev_attr_ne_guid_vendor_id, |
| &dev_attr_ne_capabilities, |
| &dev_attr_ne_vendor_id, |
| &dev_attr_ne_nodeid, |
| &dev_attr_bus_options, |
| &dev_attr_tlabels_free, |
| &dev_attr_tlabels_allocations, |
| &dev_attr_tlabels_mask, |
| }; |
| |
| |
| |
| fw_attr(ud, struct unit_directory, address, unsigned long long, "0x%016Lx\n") |
| fw_attr(ud, struct unit_directory, length, int, "%d\n") |
| /* These are all dependent on the value being provided */ |
| fw_attr(ud, struct unit_directory, vendor_id, unsigned int, "0x%06x\n") |
| fw_attr(ud, struct unit_directory, model_id, unsigned int, "0x%06x\n") |
| fw_attr(ud, struct unit_directory, specifier_id, unsigned int, "0x%06x\n") |
| fw_attr(ud, struct unit_directory, version, unsigned int, "0x%06x\n") |
| fw_attr_td(ud, struct unit_directory, vendor_name_kv) |
| fw_attr(ud, struct unit_directory, vendor_oui, const char *, "%s\n") |
| fw_attr_td(ud, struct unit_directory, model_name_kv) |
| |
| static struct device_attribute *const fw_ud_attrs[] = { |
| &dev_attr_ud_address, |
| &dev_attr_ud_length, |
| &dev_attr_ignore_driver, |
| }; |
| |
| |
| fw_attr(host, struct hpsb_host, node_count, int, "%d\n") |
| fw_attr(host, struct hpsb_host, selfid_count, int, "%d\n") |
| fw_attr(host, struct hpsb_host, nodes_active, int, "%d\n") |
| fw_attr(host, struct hpsb_host, in_bus_reset, int, "%d\n") |
| fw_attr(host, struct hpsb_host, is_root, int, "%d\n") |
| fw_attr(host, struct hpsb_host, is_cycmst, int, "%d\n") |
| fw_attr(host, struct hpsb_host, is_irm, int, "%d\n") |
| fw_attr(host, struct hpsb_host, is_busmgr, int, "%d\n") |
| |
| static struct device_attribute *const fw_host_attrs[] = { |
| &dev_attr_host_node_count, |
| &dev_attr_host_selfid_count, |
| &dev_attr_host_nodes_active, |
| &dev_attr_host_in_bus_reset, |
| &dev_attr_host_is_root, |
| &dev_attr_host_is_cycmst, |
| &dev_attr_host_is_irm, |
| &dev_attr_host_is_busmgr, |
| }; |
| |
| |
| static ssize_t fw_show_drv_device_ids(struct device_driver *drv, char *buf) |
| { |
| struct hpsb_protocol_driver *driver; |
| struct ieee1394_device_id *id; |
| int length = 0; |
| char *scratch = buf; |
| |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); |
| |
| for (id = driver->id_table; id->match_flags != 0; id++) { |
| int need_coma = 0; |
| |
| if (id->match_flags & IEEE1394_MATCH_VENDOR_ID) { |
| length += sprintf(scratch, "vendor_id=0x%06x", id->vendor_id); |
| scratch = buf + length; |
| need_coma++; |
| } |
| |
| if (id->match_flags & IEEE1394_MATCH_MODEL_ID) { |
| length += sprintf(scratch, "%smodel_id=0x%06x", |
| need_coma++ ? "," : "", |
| id->model_id); |
| scratch = buf + length; |
| } |
| |
| if (id->match_flags & IEEE1394_MATCH_SPECIFIER_ID) { |
| length += sprintf(scratch, "%sspecifier_id=0x%06x", |
| need_coma++ ? "," : "", |
| id->specifier_id); |
| scratch = buf + length; |
| } |
| |
| if (id->match_flags & IEEE1394_MATCH_VERSION) { |
| length += sprintf(scratch, "%sversion=0x%06x", |
| need_coma++ ? "," : "", |
| id->version); |
| scratch = buf + length; |
| } |
| |
| if (need_coma) { |
| *scratch++ = '\n'; |
| length++; |
| } |
| } |
| |
| return length; |
| } |
| static DRIVER_ATTR(device_ids,S_IRUGO,fw_show_drv_device_ids,NULL); |
| |
| |
| fw_drv_attr(name, const char *, "%s\n") |
| |
| static struct driver_attribute *const fw_drv_attrs[] = { |
| &driver_attr_drv_name, |
| &driver_attr_device_ids, |
| }; |
| |
| |
| static void nodemgr_create_drv_files(struct hpsb_protocol_driver *driver) |
| { |
| struct device_driver *drv = &driver->driver; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_drv_attrs); i++) |
| driver_create_file(drv, fw_drv_attrs[i]); |
| } |
| |
| |
| static void nodemgr_remove_drv_files(struct hpsb_protocol_driver *driver) |
| { |
| struct device_driver *drv = &driver->driver; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_drv_attrs); i++) |
| driver_remove_file(drv, fw_drv_attrs[i]); |
| } |
| |
| |
| static void nodemgr_create_ne_dev_files(struct node_entry *ne) |
| { |
| struct device *dev = &ne->device; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_ne_attrs); i++) |
| device_create_file(dev, fw_ne_attrs[i]); |
| } |
| |
| |
| static void nodemgr_create_host_dev_files(struct hpsb_host *host) |
| { |
| struct device *dev = &host->device; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_host_attrs); i++) |
| device_create_file(dev, fw_host_attrs[i]); |
| } |
| |
| |
| static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host, nodeid_t nodeid); |
| |
| static void nodemgr_update_host_dev_links(struct hpsb_host *host) |
| { |
| struct device *dev = &host->device; |
| struct node_entry *ne; |
| |
| sysfs_remove_link(&dev->kobj, "irm_id"); |
| sysfs_remove_link(&dev->kobj, "busmgr_id"); |
| sysfs_remove_link(&dev->kobj, "host_id"); |
| |
| if ((ne = find_entry_by_nodeid(host, host->irm_id))) |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "irm_id"); |
| if ((ne = find_entry_by_nodeid(host, host->busmgr_id))) |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "busmgr_id"); |
| if ((ne = find_entry_by_nodeid(host, host->node_id))) |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "host_id"); |
| } |
| |
| static void nodemgr_create_ud_dev_files(struct unit_directory *ud) |
| { |
| struct device *dev = &ud->device; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_ud_attrs); i++) |
| device_create_file(dev, fw_ud_attrs[i]); |
| |
| if (ud->flags & UNIT_DIRECTORY_SPECIFIER_ID) |
| device_create_file(dev, &dev_attr_ud_specifier_id); |
| |
| if (ud->flags & UNIT_DIRECTORY_VERSION) |
| device_create_file(dev, &dev_attr_ud_version); |
| |
| if (ud->flags & UNIT_DIRECTORY_VENDOR_ID) { |
| device_create_file(dev, &dev_attr_ud_vendor_id); |
| if (ud->vendor_name_kv) |
| device_create_file(dev, &dev_attr_ud_vendor_name_kv); |
| } |
| |
| if (ud->flags & UNIT_DIRECTORY_MODEL_ID) { |
| device_create_file(dev, &dev_attr_ud_model_id); |
| if (ud->model_name_kv) |
| device_create_file(dev, &dev_attr_ud_model_name_kv); |
| } |
| } |
| |
| |
| static int nodemgr_bus_match(struct device * dev, struct device_driver * drv) |
| { |
| struct hpsb_protocol_driver *driver; |
| struct unit_directory *ud; |
| struct ieee1394_device_id *id; |
| |
| /* We only match unit directories */ |
| if (dev->platform_data != &nodemgr_ud_platform_data) |
| return 0; |
| |
| ud = container_of(dev, struct unit_directory, device); |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); |
| |
| if (ud->ne->in_limbo || ud->ignore_driver) |
| return 0; |
| |
| for (id = driver->id_table; id->match_flags != 0; id++) { |
| if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) && |
| id->vendor_id != ud->vendor_id) |
| continue; |
| |
| if ((id->match_flags & IEEE1394_MATCH_MODEL_ID) && |
| id->model_id != ud->model_id) |
| continue; |
| |
| if ((id->match_flags & IEEE1394_MATCH_SPECIFIER_ID) && |
| id->specifier_id != ud->specifier_id) |
| continue; |
| |
| if ((id->match_flags & IEEE1394_MATCH_VERSION) && |
| id->version != ud->version) |
| continue; |
| |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| static void nodemgr_remove_uds(struct node_entry *ne) |
| { |
| struct class_device *cdev, *next; |
| struct unit_directory *ud; |
| |
| list_for_each_entry_safe(cdev, next, &nodemgr_ud_class.children, node) { |
| ud = container_of(cdev, struct unit_directory, class_dev); |
| |
| if (ud->ne != ne) |
| continue; |
| |
| class_device_unregister(&ud->class_dev); |
| device_unregister(&ud->device); |
| } |
| } |
| |
| |
| static void nodemgr_remove_ne(struct node_entry *ne) |
| { |
| struct device *dev = &ne->device; |
| |
| dev = get_device(&ne->device); |
| if (!dev) |
| return; |
| |
| HPSB_DEBUG("Node removed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); |
| |
| nodemgr_remove_uds(ne); |
| |
| class_device_unregister(&ne->class_dev); |
| device_unregister(dev); |
| |
| put_device(dev); |
| } |
| |
| static int __nodemgr_remove_host_dev(struct device *dev, void *data) |
| { |
| nodemgr_remove_ne(container_of(dev, struct node_entry, device)); |
| return 0; |
| } |
| |
| static void nodemgr_remove_host_dev(struct device *dev) |
| { |
| device_for_each_child(dev, NULL, __nodemgr_remove_host_dev); |
| sysfs_remove_link(&dev->kobj, "irm_id"); |
| sysfs_remove_link(&dev->kobj, "busmgr_id"); |
| sysfs_remove_link(&dev->kobj, "host_id"); |
| } |
| |
| |
| static void nodemgr_update_bus_options(struct node_entry *ne) |
| { |
| #ifdef CONFIG_IEEE1394_VERBOSEDEBUG |
| static const u16 mr[] = { 4, 64, 1024, 0}; |
| #endif |
| quadlet_t busoptions = be32_to_cpu(ne->csr->bus_info_data[2]); |
| |
| ne->busopt.irmc = (busoptions >> 31) & 1; |
| ne->busopt.cmc = (busoptions >> 30) & 1; |
| ne->busopt.isc = (busoptions >> 29) & 1; |
| ne->busopt.bmc = (busoptions >> 28) & 1; |
| ne->busopt.pmc = (busoptions >> 27) & 1; |
| ne->busopt.cyc_clk_acc = (busoptions >> 16) & 0xff; |
| ne->busopt.max_rec = 1 << (((busoptions >> 12) & 0xf) + 1); |
| ne->busopt.max_rom = (busoptions >> 8) & 0x3; |
| ne->busopt.generation = (busoptions >> 4) & 0xf; |
| ne->busopt.lnkspd = busoptions & 0x7; |
| |
| HPSB_VERBOSE("NodeMgr: raw=0x%08x irmc=%d cmc=%d isc=%d bmc=%d pmc=%d " |
| "cyc_clk_acc=%d max_rec=%d max_rom=%d gen=%d lspd=%d", |
| busoptions, ne->busopt.irmc, ne->busopt.cmc, |
| ne->busopt.isc, ne->busopt.bmc, ne->busopt.pmc, |
| ne->busopt.cyc_clk_acc, ne->busopt.max_rec, |
| mr[ne->busopt.max_rom], |
| ne->busopt.generation, ne->busopt.lnkspd); |
| } |
| |
| |
| static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr *csr, |
| struct host_info *hi, nodeid_t nodeid, |
| unsigned int generation) |
| { |
| struct hpsb_host *host = hi->host; |
| struct node_entry *ne; |
| |
| ne = kzalloc(sizeof(*ne), GFP_KERNEL); |
| if (!ne) |
| return NULL; |
| |
| ne->tpool = &host->tpool[nodeid & NODE_MASK]; |
| |
| ne->host = host; |
| ne->nodeid = nodeid; |
| ne->generation = generation; |
| ne->needs_probe = 1; |
| |
| ne->guid = guid; |
| ne->guid_vendor_id = (guid >> 40) & 0xffffff; |
| ne->guid_vendor_oui = nodemgr_find_oui_name(ne->guid_vendor_id); |
| ne->csr = csr; |
| |
| memcpy(&ne->device, &nodemgr_dev_template_ne, |
| sizeof(ne->device)); |
| ne->device.parent = &host->device; |
| snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx", |
| (unsigned long long)(ne->guid)); |
| |
| ne->class_dev.dev = &ne->device; |
| ne->class_dev.class = &nodemgr_ne_class; |
| snprintf(ne->class_dev.class_id, BUS_ID_SIZE, "%016Lx", |
| (unsigned long long)(ne->guid)); |
| |
| device_register(&ne->device); |
| class_device_register(&ne->class_dev); |
| get_device(&ne->device); |
| |
| if (ne->guid_vendor_oui) |
| device_create_file(&ne->device, &dev_attr_ne_guid_vendor_oui); |
| nodemgr_create_ne_dev_files(ne); |
| |
| nodemgr_update_bus_options(ne); |
| |
| HPSB_DEBUG("%s added: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", |
| (host->node_id == nodeid) ? "Host" : "Node", |
| NODE_BUS_ARGS(host, nodeid), (unsigned long long)guid); |
| |
| return ne; |
| } |
| |
| |
| static struct node_entry *find_entry_by_guid(u64 guid) |
| { |
| struct class *class = &nodemgr_ne_class; |
| struct class_device *cdev; |
| struct node_entry *ne, *ret_ne = NULL; |
| |
| down_read(&class->subsys.rwsem); |
| list_for_each_entry(cdev, &class->children, node) { |
| ne = container_of(cdev, struct node_entry, class_dev); |
| |
| if (ne->guid == guid) { |
| ret_ne = ne; |
| break; |
| } |
| } |
| up_read(&class->subsys.rwsem); |
| |
| return ret_ne; |
| } |
| |
| |
| static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host, nodeid_t nodeid) |
| { |
| struct class *class = &nodemgr_ne_class; |
| struct class_device *cdev; |
| struct node_entry *ne, *ret_ne = NULL; |
| |
| down_read(&class->subsys.rwsem); |
| list_for_each_entry(cdev, &class->children, node) { |
| ne = container_of(cdev, struct node_entry, class_dev); |
| |
| if (ne->host == host && ne->nodeid == nodeid) { |
| ret_ne = ne; |
| break; |
| } |
| } |
| up_read(&class->subsys.rwsem); |
| |
| return ret_ne; |
| } |
| |
| |
| static void nodemgr_register_device(struct node_entry *ne, |
| struct unit_directory *ud, struct device *parent) |
| { |
| memcpy(&ud->device, &nodemgr_dev_template_ud, |
| sizeof(ud->device)); |
| |
| ud->device.parent = parent; |
| |
| snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u", |
| ne->device.bus_id, ud->id); |
| |
| ud->class_dev.dev = &ud->device; |
| ud->class_dev.class = &nodemgr_ud_class; |
| snprintf(ud->class_dev.class_id, BUS_ID_SIZE, "%s-%u", |
| ne->device.bus_id, ud->id); |
| |
| device_register(&ud->device); |
| class_device_register(&ud->class_dev); |
| get_device(&ud->device); |
| |
| if (ud->vendor_oui) |
| device_create_file(&ud->device, &dev_attr_ud_vendor_oui); |
| nodemgr_create_ud_dev_files(ud); |
| } |
| |
| |
| /* This implementation currently only scans the config rom and its |
| * immediate unit directories looking for software_id and |
| * software_version entries, in order to get driver autoloading working. */ |
| static struct unit_directory *nodemgr_process_unit_directory |
| (struct host_info *hi, struct node_entry *ne, struct csr1212_keyval *ud_kv, |
| unsigned int *id, struct unit_directory *parent) |
| { |
| struct unit_directory *ud; |
| struct unit_directory *ud_child = NULL; |
| struct csr1212_dentry *dentry; |
| struct csr1212_keyval *kv; |
| u8 last_key_id = 0; |
| |
| ud = kzalloc(sizeof(*ud), GFP_KERNEL); |
| if (!ud) |
| goto unit_directory_error; |
| |
| ud->ne = ne; |
| ud->ignore_driver = ignore_drivers; |
| ud->address = ud_kv->offset + CSR1212_CONFIG_ROM_SPACE_BASE; |
| ud->ud_kv = ud_kv; |
| ud->id = (*id)++; |
| |
| csr1212_for_each_dir_entry(ne->csr, kv, ud_kv, dentry) { |
| switch (kv->key.id) { |
| case CSR1212_KV_ID_VENDOR: |
| if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { |
| ud->vendor_id = kv->value.immediate; |
| ud->flags |= UNIT_DIRECTORY_VENDOR_ID; |
| |
| if (ud->vendor_id) |
| ud->vendor_oui = nodemgr_find_oui_name(ud->vendor_id); |
| } |
| break; |
| |
| case CSR1212_KV_ID_MODEL: |
| ud->model_id = kv->value.immediate; |
| ud->flags |= UNIT_DIRECTORY_MODEL_ID; |
| break; |
| |
| case CSR1212_KV_ID_SPECIFIER_ID: |
| ud->specifier_id = kv->value.immediate; |
| ud->flags |= UNIT_DIRECTORY_SPECIFIER_ID; |
| break; |
| |
| case CSR1212_KV_ID_VERSION: |
| ud->version = kv->value.immediate; |
| ud->flags |= UNIT_DIRECTORY_VERSION; |
| break; |
| |
| case CSR1212_KV_ID_DESCRIPTOR: |
| if (kv->key.type == CSR1212_KV_TYPE_LEAF && |
| CSR1212_DESCRIPTOR_LEAF_TYPE(kv) == 0 && |
| CSR1212_DESCRIPTOR_LEAF_SPECIFIER_ID(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_WIDTH(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_CHAR_SET(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_LANGUAGE(kv) == 0) { |
| switch (last_key_id) { |
| case CSR1212_KV_ID_VENDOR: |
| ud->vendor_name_kv = kv; |
| csr1212_keep_keyval(kv); |
| break; |
| |
| case CSR1212_KV_ID_MODEL: |
| ud->model_name_kv = kv; |
| csr1212_keep_keyval(kv); |
| break; |
| |
| } |
| } /* else if (kv->key.type == CSR1212_KV_TYPE_DIRECTORY) ... */ |
| break; |
| |
| case CSR1212_KV_ID_DEPENDENT_INFO: |
| /* Logical Unit Number */ |
| if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { |
| if (ud->flags & UNIT_DIRECTORY_HAS_LUN) { |
| ud_child = kmalloc(sizeof(*ud_child), GFP_KERNEL); |
| if (!ud_child) |
| goto unit_directory_error; |
| memcpy(ud_child, ud, sizeof(*ud_child)); |
| nodemgr_register_device(ne, ud_child, &ne->device); |
| ud_child = NULL; |
| |
| ud->id = (*id)++; |
| } |
| ud->lun = kv->value.immediate; |
| ud->flags |= UNIT_DIRECTORY_HAS_LUN; |
| |
| /* Logical Unit Directory */ |
| } else if (kv->key.type == CSR1212_KV_TYPE_DIRECTORY) { |
| /* This should really be done in SBP2 as this is |
| * doing SBP2 specific parsing. |
| */ |
| |
| /* first register the parent unit */ |
| ud->flags |= UNIT_DIRECTORY_HAS_LUN_DIRECTORY; |
| if (ud->device.bus != &ieee1394_bus_type) |
| nodemgr_register_device(ne, ud, &ne->device); |
| |
| /* process the child unit */ |
| ud_child = nodemgr_process_unit_directory(hi, ne, kv, id, ud); |
| |
| if (ud_child == NULL) |
| break; |
| |
| /* inherit unspecified values, the driver core picks it up */ |
| if ((ud->flags & UNIT_DIRECTORY_MODEL_ID) && |
| !(ud_child->flags & UNIT_DIRECTORY_MODEL_ID)) |
| { |
| ud_child->flags |= UNIT_DIRECTORY_MODEL_ID; |
| ud_child->model_id = ud->model_id; |
| } |
| if ((ud->flags & UNIT_DIRECTORY_SPECIFIER_ID) && |
| !(ud_child->flags & UNIT_DIRECTORY_SPECIFIER_ID)) |
| { |
| ud_child->flags |= UNIT_DIRECTORY_SPECIFIER_ID; |
| ud_child->specifier_id = ud->specifier_id; |
| } |
| if ((ud->flags & UNIT_DIRECTORY_VERSION) && |
| !(ud_child->flags & UNIT_DIRECTORY_VERSION)) |
| { |
| ud_child->flags |= UNIT_DIRECTORY_VERSION; |
| ud_child->version = ud->version; |
| } |
| |
| /* register the child unit */ |
| ud_child->flags |= UNIT_DIRECTORY_LUN_DIRECTORY; |
| nodemgr_register_device(ne, ud_child, &ud->device); |
| } |
| |
| break; |
| |
| default: |
| break; |
| } |
| last_key_id = kv->key.id; |
| } |
| |
| /* do not process child units here and only if not already registered */ |
| if (!parent && ud->device.bus != &ieee1394_bus_type) |
| nodemgr_register_device(ne, ud, &ne->device); |
| |
| return ud; |
| |
| unit_directory_error: |
| kfree(ud); |
| return NULL; |
| } |
| |
| |
| static void nodemgr_process_root_directory(struct host_info *hi, struct node_entry *ne) |
| { |
| unsigned int ud_id = 0; |
| struct csr1212_dentry *dentry; |
| struct csr1212_keyval *kv; |
| u8 last_key_id = 0; |
| |
| ne->needs_probe = 0; |
| |
| csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) { |
| switch (kv->key.id) { |
| case CSR1212_KV_ID_VENDOR: |
| ne->vendor_id = kv->value.immediate; |
| |
| if (ne->vendor_id) |
| ne->vendor_oui = nodemgr_find_oui_name(ne->vendor_id); |
| break; |
| |
| case CSR1212_KV_ID_NODE_CAPABILITIES: |
| ne->capabilities = kv->value.immediate; |
| break; |
| |
| case CSR1212_KV_ID_UNIT: |
| nodemgr_process_unit_directory(hi, ne, kv, &ud_id, NULL); |
| break; |
| |
| case CSR1212_KV_ID_DESCRIPTOR: |
| if (last_key_id == CSR1212_KV_ID_VENDOR) { |
| if (kv->key.type == CSR1212_KV_TYPE_LEAF && |
| CSR1212_DESCRIPTOR_LEAF_TYPE(kv) == 0 && |
| CSR1212_DESCRIPTOR_LEAF_SPECIFIER_ID(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_WIDTH(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_CHAR_SET(kv) == 0 && |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_LANGUAGE(kv) == 0) { |
| ne->vendor_name_kv = kv; |
| csr1212_keep_keyval(kv); |
| } |
| } |
| break; |
| } |
| last_key_id = kv->key.id; |
| } |
| |
| if (ne->vendor_oui) |
| device_create_file(&ne->device, &dev_attr_ne_vendor_oui); |
| if (ne->vendor_name_kv) |
| device_create_file(&ne->device, &dev_attr_ne_vendor_name_kv); |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, |
| char *buffer, int buffer_size) |
| { |
| struct unit_directory *ud; |
| int i = 0; |
| int length = 0; |
| /* ieee1394:venNmoNspNverN */ |
| char buf[8 + 1 + 3 + 8 + 2 + 8 + 2 + 8 + 3 + 8 + 1]; |
| |
| if (!cdev) |
| return -ENODEV; |
| |
| ud = container_of(cdev, struct unit_directory, class_dev); |
| |
| if (ud->ne->in_limbo || ud->ignore_driver) |
| return -ENODEV; |
| |
| #define PUT_ENVP(fmt,val) \ |
| do { \ |
| int printed; \ |
| envp[i++] = buffer; \ |
| printed = snprintf(buffer, buffer_size - length, \ |
| fmt, val); \ |
| if ((buffer_size - (length+printed) <= 0) || (i >= num_envp)) \ |
| return -ENOMEM; \ |
| length += printed+1; \ |
| buffer += printed+1; \ |
| } while (0) |
| |
| PUT_ENVP("VENDOR_ID=%06x", ud->vendor_id); |
| PUT_ENVP("MODEL_ID=%06x", ud->model_id); |
| PUT_ENVP("GUID=%016Lx", (unsigned long long)ud->ne->guid); |
| PUT_ENVP("SPECIFIER_ID=%06x", ud->specifier_id); |
| PUT_ENVP("VERSION=%06x", ud->version); |
| snprintf(buf, sizeof(buf), "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", |
| ud->vendor_id, |
| ud->model_id, |
| ud->specifier_id, |
| ud->version); |
| PUT_ENVP("MODALIAS=%s", buf); |
| |
| #undef PUT_ENVP |
| |
| envp[i] = NULL; |
| |
| return 0; |
| } |
| |
| #else |
| |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, |
| char *buffer, int buffer_size) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_HOTPLUG */ |
| |
| |
| int hpsb_register_protocol(struct hpsb_protocol_driver *driver) |
| { |
| int ret; |
| |
| /* This will cause a probe for devices */ |
| ret = driver_register(&driver->driver); |
| if (!ret) |
| nodemgr_create_drv_files(driver); |
| |
| return ret; |
| } |
| |
| void hpsb_unregister_protocol(struct hpsb_protocol_driver *driver) |
| { |
| nodemgr_remove_drv_files(driver); |
| /* This will subsequently disconnect all devices that our driver |
| * is attached to. */ |
| driver_unregister(&driver->driver); |
| } |
| |
| |
| /* |
| * This function updates nodes that were present on the bus before the |
| * reset and still are after the reset. The nodeid and the config rom |
| * may have changed, and the drivers managing this device must be |
| * informed that this device just went through a bus reset, to allow |
| * the to take whatever actions required. |
| */ |
| static void nodemgr_update_node(struct node_entry *ne, struct csr1212_csr *csr, |
| struct host_info *hi, nodeid_t nodeid, |
| unsigned int generation) |
| { |
| if (ne->nodeid != nodeid) { |
| HPSB_DEBUG("Node changed: " NODE_BUS_FMT " -> " NODE_BUS_FMT, |
| NODE_BUS_ARGS(ne->host, ne->nodeid), |
| NODE_BUS_ARGS(ne->host, nodeid)); |
| ne->nodeid = nodeid; |
| } |
| |
| if (ne->busopt.generation != ((be32_to_cpu(csr->bus_info_data[2]) >> 4) & 0xf)) { |
| kfree(ne->csr->private); |
| csr1212_destroy_csr(ne->csr); |
| ne->csr = csr; |
| |
| /* If the node's configrom generation has changed, we |
| * unregister all the unit directories. */ |
| nodemgr_remove_uds(ne); |
| |
| nodemgr_update_bus_options(ne); |
| |
| /* Mark the node as new, so it gets re-probed */ |
| ne->needs_probe = 1; |
| } else { |
| /* old cache is valid, so update its generation */ |
| struct nodemgr_csr_info *ci = ne->csr->private; |
| ci->generation = generation; |
| /* free the partially filled now unneeded new cache */ |
| kfree(csr->private); |
| csr1212_destroy_csr(csr); |
| } |
| |
| if (ne->in_limbo) |
| nodemgr_resume_ne(ne); |
| |
| /* Mark the node current */ |
| ne->generation = generation; |
| } |
| |
| |
| |
| static void nodemgr_node_scan_one(struct host_info *hi, |
| nodeid_t nodeid, int generation) |
| { |
| struct hpsb_host *host = hi->host; |
| struct node_entry *ne; |
| octlet_t guid; |
| struct csr1212_csr *csr; |
| struct nodemgr_csr_info *ci; |
| |
| ci = kmalloc(sizeof(*ci), GFP_KERNEL); |
| if (!ci) |
| return; |
| |
| ci->host = host; |
| ci->nodeid = nodeid; |
| ci->generation = generation; |
| ci->speed_unverified = |
| host->speed[NODEID_TO_NODE(nodeid)] > IEEE1394_SPEED_100; |
| |
| /* We need to detect when the ConfigROM's generation has changed, |
| * so we only update the node's info when it needs to be. */ |
| |
| csr = csr1212_create_csr(&nodemgr_csr_ops, 5 * sizeof(quadlet_t), ci); |
| if (!csr || csr1212_parse_csr(csr) != CSR1212_SUCCESS) { |
| HPSB_ERR("Error parsing configrom for node " NODE_BUS_FMT, |
| NODE_BUS_ARGS(host, nodeid)); |
| if (csr) |
| csr1212_destroy_csr(csr); |
| kfree(ci); |
| return; |
| } |
| |
| if (csr->bus_info_data[1] != IEEE1394_BUSID_MAGIC) { |
| /* This isn't a 1394 device, but we let it slide. There |
| * was a report of a device with broken firmware which |
| * reported '2394' instead of '1394', which is obviously a |
| * mistake. One would hope that a non-1394 device never |
| * gets connected to Firewire bus. If someone does, we |
| * shouldn't be held responsible, so we'll allow it with a |
| * warning. */ |
| HPSB_WARN("Node " NODE_BUS_FMT " has invalid busID magic [0x%08x]", |
| NODE_BUS_ARGS(host, nodeid), csr->bus_info_data[1]); |
| } |
| |
| guid = ((u64)be32_to_cpu(csr->bus_info_data[3]) << 32) | be32_to_cpu(csr->bus_info_data[4]); |
| ne = find_entry_by_guid(guid); |
| |
| if (ne && ne->host != host && ne->in_limbo) { |
| /* Must have moved this device from one host to another */ |
| nodemgr_remove_ne(ne); |
| ne = NULL; |
| } |
| |
| if (!ne) |
| nodemgr_create_node(guid, csr, hi, nodeid, generation); |
| else |
| nodemgr_update_node(ne, csr, hi, nodeid, generation); |
| |
| return; |
| } |
| |
| |
| static void nodemgr_node_scan(struct host_info *hi, int generation) |
| { |
| int count; |
| struct hpsb_host *host = hi->host; |
| struct selfid *sid = (struct selfid *)host->topology_map; |
| nodeid_t nodeid = LOCAL_BUS; |
| |
| /* Scan each node on the bus */ |
| for (count = host->selfid_count; count; count--, sid++) { |
| if (sid->extended) |
| continue; |
| |
| if (!sid->link_active) { |
| nodeid++; |
| continue; |
| } |
| nodemgr_node_scan_one(hi, nodeid++, generation); |
| } |
| } |
| |
| |
| static void nodemgr_suspend_ne(struct node_entry *ne) |
| { |
| struct class_device *cdev; |
| struct unit_directory *ud; |
| |
| HPSB_DEBUG("Node suspended: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); |
| |
| ne->in_limbo = 1; |
| device_create_file(&ne->device, &dev_attr_ne_in_limbo); |
| |
| down_write(&ne->device.bus->subsys.rwsem); |
| list_for_each_entry(cdev, &nodemgr_ud_class.children, node) { |
| ud = container_of(cdev, struct unit_directory, class_dev); |
| |
| if (ud->ne != ne) |
| continue; |
| |
| if (ud->device.driver && |
| (!ud->device.driver->suspend || |
| ud->device.driver->suspend(&ud->device, PMSG_SUSPEND))) |
| device_release_driver(&ud->device); |
| } |
| up_write(&ne->device.bus->subsys.rwsem); |
| } |
| |
| |
| static void nodemgr_resume_ne(struct node_entry *ne) |
| { |
| struct class_device *cdev; |
| struct unit_directory *ud; |
| |
| ne->in_limbo = 0; |
| device_remove_file(&ne->device, &dev_attr_ne_in_limbo); |
| |
| down_read(&ne->device.bus->subsys.rwsem); |
| list_for_each_entry(cdev, &nodemgr_ud_class.children, node) { |
| ud = container_of(cdev, struct unit_directory, class_dev); |
| |
| if (ud->ne != ne) |
| continue; |
| |
| if (ud->device.driver && ud->device.driver->resume) |
| ud->device.driver->resume(&ud->device); |
| } |
| up_read(&ne->device.bus->subsys.rwsem); |
| |
| HPSB_DEBUG("Node resumed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); |
| } |
| |
| |
| static void nodemgr_update_pdrv(struct node_entry *ne) |
| { |
| struct unit_directory *ud; |
| struct hpsb_protocol_driver *pdrv; |
| struct class *class = &nodemgr_ud_class; |
| struct class_device *cdev; |
| |
| down_read(&class->subsys.rwsem); |
| list_for_each_entry(cdev, &class->children, node) { |
| ud = container_of(cdev, struct unit_directory, class_dev); |
| if (ud->ne != ne || !ud->device.driver) |
| continue; |
| |
| pdrv = container_of(ud->device.driver, struct hpsb_protocol_driver, driver); |
| |
| if (pdrv->update && pdrv->update(ud)) { |
| down_write(&ud->device.bus->subsys.rwsem); |
| device_release_driver(&ud->device); |
| up_write(&ud->device.bus->subsys.rwsem); |
| } |
| } |
| up_read(&class->subsys.rwsem); |
| } |
| |
| |
| /* Write the BROADCAST_CHANNEL as per IEEE1394a 8.3.2.3.11 and 8.4.2.3. This |
| * seems like an optional service but in the end it is practically mandatory |
| * as a consequence of these clauses. |
| * |
| * Note that we cannot do a broadcast write to all nodes at once because some |
| * pre-1394a devices would hang. */ |
| static void nodemgr_irm_write_bc(struct node_entry *ne, int generation) |
| { |
| const u64 bc_addr = (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL); |
| quadlet_t bc_remote, bc_local; |
| int ret; |
| |
| if (!ne->host->is_irm || ne->generation != generation || |
| ne->nodeid == ne->host->node_id) |
| return; |
| |
| bc_local = cpu_to_be32(ne->host->csr.broadcast_channel); |
| |
| /* Check if the register is implemented and 1394a compliant. */ |
| ret = hpsb_read(ne->host, ne->nodeid, generation, bc_addr, &bc_remote, |
| sizeof(bc_remote)); |
| if (!ret && bc_remote & cpu_to_be32(0x80000000) && |
| bc_remote != bc_local) |
| hpsb_node_write(ne, bc_addr, &bc_local, sizeof(bc_local)); |
| } |
| |
| |
| static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int generation) |
| { |
| struct device *dev; |
| |
| if (ne->host != hi->host || ne->in_limbo) |
| return; |
| |
| dev = get_device(&ne->device); |
| if (!dev) |
| return; |
| |
| nodemgr_irm_write_bc(ne, generation); |
| |
| /* If "needs_probe", then this is either a new or changed node we |
| * rescan totally. If the generation matches for an existing node |
| * (one that existed prior to the bus reset) we send update calls |
| * down to the drivers. Otherwise, this is a dead node and we |
| * suspend it. */ |
| if (ne->needs_probe) |
| nodemgr_process_root_directory(hi, ne); |
| else if (ne->generation == generation) |
| nodemgr_update_pdrv(ne); |
| else |
| nodemgr_suspend_ne(ne); |
| |
| put_device(dev); |
| } |
| |
| |
| static void nodemgr_node_probe(struct host_info *hi, int generation) |
| { |
| struct hpsb_host *host = hi->host; |
| struct class *class = &nodemgr_ne_class; |
| struct class_device *cdev; |
| struct node_entry *ne; |
| |
| /* Do some processing of the nodes we've probed. This pulls them |
| * into the sysfs layer if needed, and can result in processing of |
| * unit-directories, or just updating the node and it's |
| * unit-directories. |
| * |
| * Run updates before probes. Usually, updates are time-critical |
| * while probes are time-consuming. (Well, those probes need some |
| * improvement...) */ |
| |
| down_read(&class->subsys.rwsem); |
| list_for_each_entry(cdev, &class->children, node) { |
| ne = container_of(cdev, struct node_entry, class_dev); |
| if (!ne->needs_probe) |
| nodemgr_probe_ne(hi, ne, generation); |
| } |
| list_for_each_entry(cdev, &class->children, node) { |
| ne = container_of(cdev, struct node_entry, class_dev); |
| if (ne->needs_probe) |
| nodemgr_probe_ne(hi, ne, generation); |
| } |
| up_read(&class->subsys.rwsem); |
| |
| |
| /* If we had a bus reset while we were scanning the bus, it is |
| * possible that we did not probe all nodes. In that case, we |
| * skip the clean up for now, since we could remove nodes that |
| * were still on the bus. The bus reset increased hi->reset_sem, |
| * so there's a bus scan pending which will do the clean up |
| * eventually. |
| * |
| * Now let's tell the bus to rescan our devices. This may seem |
| * like overhead, but the driver-model core will only scan a |
| * device for a driver when either the device is added, or when a |
| * new driver is added. A bus reset is a good reason to rescan |
| * devices that were there before. For example, an sbp2 device |
| * may become available for login, if the host that held it was |
| * just removed. */ |
| |
| if (generation == get_hpsb_generation(host)) |
| bus_rescan_devices(&ieee1394_bus_type); |
| |
| return; |
| } |
| |
| static int nodemgr_send_resume_packet(struct hpsb_host *host) |
| { |
| struct hpsb_packet *packet; |
| int ret = 1; |
| |
| packet = hpsb_make_phypacket(host, |
| EXTPHYPACKET_TYPE_RESUME | |
| NODEID_TO_NODE(host->node_id) << PHYPACKET_PORT_SHIFT); |
| if (packet) { |
| packet->no_waiter = 1; |
| packet->generation = get_hpsb_generation(host); |
| ret = hpsb_send_packet(packet); |
| } |
| if (ret) |
| HPSB_WARN("fw-host%d: Failed to broadcast resume packet", |
| host->id); |
| return ret; |
| } |
| |
| /* Perform a few high-level IRM responsibilities. */ |
| static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) |
| { |
| quadlet_t bc; |
| |
| /* if irm_id == -1 then there is no IRM on this bus */ |
| if (!host->is_irm || host->irm_id == (nodeid_t)-1) |
| return 1; |
| |
| /* We are a 1394a-2000 compliant IRM. Set the validity bit. */ |
| host->csr.broadcast_channel |= 0x40000000; |
| |
| /* If there is no bus manager then we should set the root node's |
| * force_root bit to promote bus stability per the 1394 |
| * spec. (8.4.2.6) */ |
| if (host->busmgr_id == 0xffff && host->node_count > 1) |
| { |
| u16 root_node = host->node_count - 1; |
| |
| /* get cycle master capability flag from root node */ |
| if (host->is_cycmst || |
| (!hpsb_read(host, LOCAL_BUS | root_node, get_hpsb_generation(host), |
| (CSR_REGISTER_BASE + CSR_CONFIG_ROM + 2 * sizeof(quadlet_t)), |
| &bc, sizeof(quadlet_t)) && |
| be32_to_cpu(bc) & 1 << CSR_CMC_SHIFT)) |
| hpsb_send_phy_config(host, root_node, -1); |
| else { |
| HPSB_DEBUG("The root node is not cycle master capable; " |
| "selecting a new root node and resetting..."); |
| |
| if (cycles >= 5) { |
| /* Oh screw it! Just leave the bus as it is */ |
| HPSB_DEBUG("Stopping reset loop for IRM sanity"); |
| return 1; |
| } |
| |
| hpsb_send_phy_config(host, NODEID_TO_NODE(host->node_id), -1); |
| hpsb_reset_bus(host, LONG_RESET_FORCE_ROOT); |
| |
| return 0; |
| } |
| } |
| |
| /* Some devices suspend their ports while being connected to an inactive |
| * host adapter, i.e. if connected before the low-level driver is |
| * loaded. They become visible either when physically unplugged and |
| * replugged, or when receiving a resume packet. Send one once. */ |
| if (!host->resume_packet_sent && !nodemgr_send_resume_packet(host)) |
| host->resume_packet_sent = 1; |
| |
| return 1; |
| } |
| |
| /* We need to ensure that if we are not the IRM, that the IRM node is capable of |
| * everything we can do, otherwise issue a bus reset and try to become the IRM |
| * ourselves. */ |
| static int nodemgr_check_irm_capability(struct hpsb_host *host, int cycles) |
| { |
| quadlet_t bc; |
| int status; |
| |
| if (hpsb_disable_irm || host->is_irm) |
| return 1; |
| |
| status = hpsb_read(host, LOCAL_BUS | (host->irm_id), |
| get_hpsb_generation(host), |
| (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL), |
| &bc, sizeof(quadlet_t)); |
| |
| if (status < 0 || !(be32_to_cpu(bc) & 0x80000000)) { |
| /* The current irm node does not have a valid BROADCAST_CHANNEL |
| * register and we do, so reset the bus with force_root set */ |
| HPSB_DEBUG("Current remote IRM is not 1394a-2000 compliant, resetting..."); |
| |
| if (cycles >= 5) { |
| /* Oh screw it! Just leave the bus as it is */ |
| HPSB_DEBUG("Stopping reset loop for IRM sanity"); |
| return 1; |
| } |
| |
| hpsb_send_phy_config(host, NODEID_TO_NODE(host->node_id), -1); |
| hpsb_reset_bus(host, LONG_RESET_FORCE_ROOT); |
| |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int nodemgr_host_thread(void *__hi) |
| { |
| struct host_info *hi = (struct host_info *)__hi; |
| struct hpsb_host *host = hi->host; |
| int reset_cycles = 0; |
| |
| /* No userlevel access needed */ |
| daemonize(hi->daemon_name); |
| |
| /* Setup our device-model entries */ |
| nodemgr_create_host_dev_files(host); |
| |
| /* Sit and wait for a signal to probe the nodes on the bus. This |
| * happens when we get a bus reset. */ |
| while (1) { |
| unsigned int generation = 0; |
| int i; |
| |
| if (down_interruptible(&hi->reset_sem) || |
| down_interruptible(&nodemgr_serialize)) { |
| if (try_to_freeze()) |
| continue; |
| printk("NodeMgr: received unexpected signal?!\n" ); |
| break; |
| } |
| |
| if (hi->kill_me) { |
| up(&nodemgr_serialize); |
| break; |
| } |
| |
| /* Pause for 1/4 second in 1/16 second intervals, |
| * to make sure things settle down. */ |
| for (i = 0; i < 4 ; i++) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| if (msleep_interruptible(63)) { |
| up(&nodemgr_serialize); |
| goto caught_signal; |
| } |
| |
| /* Now get the generation in which the node ID's we collect |
| * are valid. During the bus scan we will use this generation |
| * for the read transactions, so that if another reset occurs |
| * during the scan the transactions will fail instead of |
| * returning bogus data. */ |
| generation = get_hpsb_generation(host); |
| |
| /* If we get a reset before we are done waiting, then |
| * start the the waiting over again */ |
| while (!down_trylock(&hi->reset_sem)) |
| i = 0; |
| |
| /* Check the kill_me again */ |
| if (hi->kill_me) { |
| up(&nodemgr_serialize); |
| goto caught_signal; |
| } |
| } |
| |
| if (!nodemgr_check_irm_capability(host, reset_cycles) || |
| !nodemgr_do_irm_duties(host, reset_cycles)) { |
| reset_cycles++; |
| up(&nodemgr_serialize); |
| continue; |
| } |
| reset_cycles = 0; |
| |
| /* Scan our nodes to get the bus options and create node |
| * entries. This does not do the sysfs stuff, since that |
| * would trigger uevents and such, which is a bad idea at |
| * this point. */ |
| nodemgr_node_scan(hi, generation); |
| |
| /* This actually does the full probe, with sysfs |
| * registration. */ |
| nodemgr_node_probe(hi, generation); |
| |
| /* Update some of our sysfs symlinks */ |
| nodemgr_update_host_dev_links(host); |
| |
| up(&nodemgr_serialize); |
| } |
| |
| caught_signal: |
| HPSB_VERBOSE("NodeMgr: Exiting thread"); |
| |
| complete_and_exit(&hi->exited, 0); |
| } |
| |
| int nodemgr_for_each_host(void *__data, int (*cb)(struct hpsb_host *, void *)) |
| { |
| struct class *class = &hpsb_host_class; |
| struct class_device *cdev; |
| struct hpsb_host *host; |
| int error = 0; |
| |
| down_read(&class->subsys.rwsem); |
| list_for_each_entry(cdev, &class->children, node) { |
| host = container_of(cdev, struct hpsb_host, class_dev); |
| |
| if ((error = cb(host, __data))) |
| break; |
| } |
| up_read(&class->subsys.rwsem); |
| |
| return error; |
| } |
| |
| /* The following four convenience functions use a struct node_entry |
| * for addressing a node on the bus. They are intended for use by any |
| * process context, not just the nodemgr thread, so we need to be a |
| * little careful when reading out the node ID and generation. The |
| * thing that can go wrong is that we get the node ID, then a bus |
| * reset occurs, and then we read the generation. The node ID is |
| * possibly invalid, but the generation is current, and we end up |
| * sending a packet to a the wrong node. |
| * |
| * The solution is to make sure we read the generation first, so that |
| * if a reset occurs in the process, we end up with a stale generation |
| * and the transactions will fail instead of silently using wrong node |
| * ID's. |
| */ |
| |
| void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *pkt) |
| { |
| pkt->host = ne->host; |
| pkt->generation = ne->generation; |
| barrier(); |
| pkt->node_id = ne->nodeid; |
| } |
| |
| int hpsb_node_write(struct node_entry *ne, u64 addr, |
| quadlet_t *buffer, size_t length) |
| { |
| unsigned int generation = ne->generation; |
| |
| barrier(); |
| return hpsb_write(ne->host, ne->nodeid, generation, |
| addr, buffer, length); |
| } |
| |
| static void nodemgr_add_host(struct hpsb_host *host) |
| { |
| struct host_info *hi; |
| |
| hi = hpsb_create_hostinfo(&nodemgr_highlevel, host, sizeof(*hi)); |
| |
| if (!hi) { |
| HPSB_ERR ("NodeMgr: out of memory in add host"); |
| return; |
| } |
| |
| hi->host = host; |
| init_completion(&hi->exited); |
| sema_init(&hi->reset_sem, 0); |
| |
| sprintf(hi->daemon_name, "knodemgrd_%d", host->id); |
| |
| hi->pid = kernel_thread(nodemgr_host_thread, hi, CLONE_KERNEL); |
| |
| if (hi->pid < 0) { |
| HPSB_ERR ("NodeMgr: failed to start %s thread for %s", |
| hi->daemon_name, host->driver->name); |
| hpsb_destroy_hostinfo(&nodemgr_highlevel, host); |
| return; |
| } |
| |
| return; |
| } |
| |
| static void nodemgr_host_reset(struct hpsb_host *host) |
| { |
| struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host); |
| |
| if (hi != NULL) { |
| HPSB_VERBOSE("NodeMgr: Processing host reset for %s", hi->daemon_name); |
| up(&hi->reset_sem); |
| } else |
| HPSB_ERR ("NodeMgr: could not process reset of unused host"); |
| |
| return; |
| } |
| |
| static void nodemgr_remove_host(struct hpsb_host *host) |
| { |
| struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host); |
| |
| if (hi) { |
| if (hi->pid >= 0) { |
| hi->kill_me = 1; |
| mb(); |
| up(&hi->reset_sem); |
| wait_for_completion(&hi->exited); |
| nodemgr_remove_host_dev(&host->device); |
| } |
| } else |
| HPSB_ERR("NodeMgr: host %s does not exist, cannot remove", |
| host->driver->name); |
| |
| return; |
| } |
| |
| static struct hpsb_highlevel nodemgr_highlevel = { |
| .name = "Node manager", |
| .add_host = nodemgr_add_host, |
| .host_reset = nodemgr_host_reset, |
| .remove_host = nodemgr_remove_host, |
| }; |
| |
| int init_ieee1394_nodemgr(void) |
| { |
| int ret; |
| |
| ret = class_register(&nodemgr_ne_class); |
| if (ret < 0) |
| return ret; |
| |
| ret = class_register(&nodemgr_ud_class); |
| if (ret < 0) { |
| class_unregister(&nodemgr_ne_class); |
| return ret; |
| } |
| |
| hpsb_register_highlevel(&nodemgr_highlevel); |
| |
| return 0; |
| } |
| |
| void cleanup_ieee1394_nodemgr(void) |
| { |
| hpsb_unregister_highlevel(&nodemgr_highlevel); |
| |
| class_unregister(&nodemgr_ud_class); |
| class_unregister(&nodemgr_ne_class); |
| } |