| /* |
| * Rockchip USB2.0 PHY with Innosilicon IP block driver |
| * |
| * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/extcon.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/otg.h> |
| |
| #define BIT_WRITEABLE_SHIFT 16 |
| #define SCHEDULE_DELAY (60 * HZ) |
| #define OTG_SCHEDULE_DELAY (2 * HZ) |
| |
| enum rockchip_usb2phy_port_id { |
| USB2PHY_PORT_OTG, |
| USB2PHY_PORT_HOST, |
| USB2PHY_NUM_PORTS, |
| }; |
| |
| enum rockchip_usb2phy_host_state { |
| PHY_STATE_HS_ONLINE = 0, |
| PHY_STATE_DISCONNECT = 1, |
| PHY_STATE_CONNECT = 2, |
| PHY_STATE_FS_LS_ONLINE = 4, |
| }; |
| |
| /** |
| * Different states involved in USB charger detection. |
| * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection |
| * process is not yet started. |
| * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. |
| * USB_CHG_STATE_DCD_DONE Data pin contact is detected. |
| * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects |
| * between SDP and DCP/CDP). |
| * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects |
| * between DCP and CDP). |
| * USB_CHG_STATE_DETECTED USB charger type is determined. |
| */ |
| enum usb_chg_state { |
| USB_CHG_STATE_UNDEFINED = 0, |
| USB_CHG_STATE_WAIT_FOR_DCD, |
| USB_CHG_STATE_DCD_DONE, |
| USB_CHG_STATE_PRIMARY_DONE, |
| USB_CHG_STATE_SECONDARY_DONE, |
| USB_CHG_STATE_DETECTED, |
| }; |
| |
| static const unsigned int rockchip_usb2phy_extcon_cable[] = { |
| EXTCON_USB, |
| EXTCON_USB_HOST, |
| EXTCON_CHG_USB_SDP, |
| EXTCON_CHG_USB_CDP, |
| EXTCON_CHG_USB_DCP, |
| EXTCON_CHG_USB_SLOW, |
| EXTCON_NONE, |
| }; |
| |
| struct usb2phy_reg { |
| unsigned int offset; |
| unsigned int bitend; |
| unsigned int bitstart; |
| unsigned int disable; |
| unsigned int enable; |
| }; |
| |
| /** |
| * struct rockchip_chg_det_reg: usb charger detect registers |
| * @cp_det: charging port detected successfully. |
| * @dcp_det: dedicated charging port detected successfully. |
| * @dp_det: assert data pin connect successfully. |
| * @idm_sink_en: open dm sink curren. |
| * @idp_sink_en: open dp sink current. |
| * @idp_src_en: open dm source current. |
| * @rdm_pdwn_en: open dm pull down resistor. |
| * @vdm_src_en: open dm voltage source. |
| * @vdp_src_en: open dp voltage source. |
| * @opmode: utmi operational mode. |
| */ |
| struct rockchip_chg_det_reg { |
| struct usb2phy_reg cp_det; |
| struct usb2phy_reg dcp_det; |
| struct usb2phy_reg dp_det; |
| struct usb2phy_reg idm_sink_en; |
| struct usb2phy_reg idp_sink_en; |
| struct usb2phy_reg idp_src_en; |
| struct usb2phy_reg rdm_pdwn_en; |
| struct usb2phy_reg vdm_src_en; |
| struct usb2phy_reg vdp_src_en; |
| struct usb2phy_reg opmode; |
| }; |
| |
| /** |
| * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. |
| * @phy_sus: phy suspend register. |
| * @bvalid_det_en: vbus valid rise detection enable register. |
| * @bvalid_det_st: vbus valid rise detection status register. |
| * @bvalid_det_clr: vbus valid rise detection clear register. |
| * @ls_det_en: linestate detection enable register. |
| * @ls_det_st: linestate detection state register. |
| * @ls_det_clr: linestate detection clear register. |
| * @utmi_avalid: utmi vbus avalid status register. |
| * @utmi_bvalid: utmi vbus bvalid status register. |
| * @utmi_ls: utmi linestate state register. |
| * @utmi_hstdet: utmi host disconnect register. |
| */ |
| struct rockchip_usb2phy_port_cfg { |
| struct usb2phy_reg phy_sus; |
| struct usb2phy_reg bvalid_det_en; |
| struct usb2phy_reg bvalid_det_st; |
| struct usb2phy_reg bvalid_det_clr; |
| struct usb2phy_reg ls_det_en; |
| struct usb2phy_reg ls_det_st; |
| struct usb2phy_reg ls_det_clr; |
| struct usb2phy_reg utmi_avalid; |
| struct usb2phy_reg utmi_bvalid; |
| struct usb2phy_reg utmi_ls; |
| struct usb2phy_reg utmi_hstdet; |
| }; |
| |
| /** |
| * struct rockchip_usb2phy_cfg: usb-phy configuration. |
| * @reg: the address offset of grf for usb-phy config. |
| * @num_ports: specify how many ports that the phy has. |
| * @clkout_ctl: keep on/turn off output clk of phy. |
| * @chg_det: charger detection registers. |
| */ |
| struct rockchip_usb2phy_cfg { |
| unsigned int reg; |
| unsigned int num_ports; |
| struct usb2phy_reg clkout_ctl; |
| const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; |
| const struct rockchip_chg_det_reg chg_det; |
| }; |
| |
| /** |
| * struct rockchip_usb2phy_port: usb-phy port data. |
| * @port_id: flag for otg port or host port. |
| * @suspended: phy suspended flag. |
| * @utmi_avalid: utmi avalid status usage flag. |
| * true - use avalid to get vbus status |
| * flase - use bvalid to get vbus status |
| * @vbus_attached: otg device vbus status. |
| * @bvalid_irq: IRQ number assigned for vbus valid rise detection. |
| * @ls_irq: IRQ number assigned for linestate detection. |
| * @mutex: for register updating in sm_work. |
| * @chg_work: charge detect work. |
| * @otg_sm_work: OTG state machine work. |
| * @sm_work: HOST state machine work. |
| * @phy_cfg: port register configuration, assigned by driver data. |
| * @event_nb: hold event notification callback. |
| * @state: define OTG enumeration states before device reset. |
| * @mode: the dr_mode of the controller. |
| */ |
| struct rockchip_usb2phy_port { |
| struct phy *phy; |
| unsigned int port_id; |
| bool suspended; |
| bool utmi_avalid; |
| bool vbus_attached; |
| int bvalid_irq; |
| int ls_irq; |
| struct mutex mutex; |
| struct delayed_work chg_work; |
| struct delayed_work otg_sm_work; |
| struct delayed_work sm_work; |
| const struct rockchip_usb2phy_port_cfg *port_cfg; |
| struct notifier_block event_nb; |
| enum usb_otg_state state; |
| enum usb_dr_mode mode; |
| }; |
| |
| /** |
| * struct rockchip_usb2phy: usb2.0 phy driver data. |
| * @grf: General Register Files regmap. |
| * @clk: clock struct of phy input clk. |
| * @clk480m: clock struct of phy output clk. |
| * @clk_hw: clock struct of phy output clk management. |
| * @chg_state: states involved in USB charger detection. |
| * @chg_type: USB charger types. |
| * @dcd_retries: The retry count used to track Data contact |
| * detection process. |
| * @edev: extcon device for notification registration |
| * @phy_cfg: phy register configuration, assigned by driver data. |
| * @ports: phy port instance. |
| */ |
| struct rockchip_usb2phy { |
| struct device *dev; |
| struct regmap *grf; |
| struct clk *clk; |
| struct clk *clk480m; |
| struct clk_hw clk480m_hw; |
| enum usb_chg_state chg_state; |
| enum power_supply_type chg_type; |
| u8 dcd_retries; |
| struct extcon_dev *edev; |
| const struct rockchip_usb2phy_cfg *phy_cfg; |
| struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; |
| }; |
| |
| static inline int property_enable(struct rockchip_usb2phy *rphy, |
| const struct usb2phy_reg *reg, bool en) |
| { |
| unsigned int val, mask, tmp; |
| |
| tmp = en ? reg->enable : reg->disable; |
| mask = GENMASK(reg->bitend, reg->bitstart); |
| val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); |
| |
| return regmap_write(rphy->grf, reg->offset, val); |
| } |
| |
| static inline bool property_enabled(struct rockchip_usb2phy *rphy, |
| const struct usb2phy_reg *reg) |
| { |
| int ret; |
| unsigned int tmp, orig; |
| unsigned int mask = GENMASK(reg->bitend, reg->bitstart); |
| |
| ret = regmap_read(rphy->grf, reg->offset, &orig); |
| if (ret) |
| return false; |
| |
| tmp = (orig & mask) >> reg->bitstart; |
| return tmp == reg->enable; |
| } |
| |
| static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw) |
| { |
| struct rockchip_usb2phy *rphy = |
| container_of(hw, struct rockchip_usb2phy, clk480m_hw); |
| int ret; |
| |
| /* turn on 480m clk output if it is off */ |
| if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) { |
| ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true); |
| if (ret) |
| return ret; |
| |
| /* waiting for the clk become stable */ |
| usleep_range(1200, 1300); |
| } |
| |
| return 0; |
| } |
| |
| static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw) |
| { |
| struct rockchip_usb2phy *rphy = |
| container_of(hw, struct rockchip_usb2phy, clk480m_hw); |
| |
| /* turn off 480m clk output */ |
| property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false); |
| } |
| |
| static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw) |
| { |
| struct rockchip_usb2phy *rphy = |
| container_of(hw, struct rockchip_usb2phy, clk480m_hw); |
| |
| return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl); |
| } |
| |
| static unsigned long |
| rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return 480000000; |
| } |
| |
| static const struct clk_ops rockchip_usb2phy_clkout_ops = { |
| .prepare = rockchip_usb2phy_clk480m_prepare, |
| .unprepare = rockchip_usb2phy_clk480m_unprepare, |
| .is_prepared = rockchip_usb2phy_clk480m_prepared, |
| .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate, |
| }; |
| |
| static void rockchip_usb2phy_clk480m_unregister(void *data) |
| { |
| struct rockchip_usb2phy *rphy = data; |
| |
| of_clk_del_provider(rphy->dev->of_node); |
| clk_unregister(rphy->clk480m); |
| } |
| |
| static int |
| rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy) |
| { |
| struct device_node *node = rphy->dev->of_node; |
| struct clk_init_data init; |
| const char *clk_name; |
| int ret; |
| |
| init.flags = 0; |
| init.name = "clk_usbphy_480m"; |
| init.ops = &rockchip_usb2phy_clkout_ops; |
| |
| /* optional override of the clockname */ |
| of_property_read_string(node, "clock-output-names", &init.name); |
| |
| if (rphy->clk) { |
| clk_name = __clk_get_name(rphy->clk); |
| init.parent_names = &clk_name; |
| init.num_parents = 1; |
| } else { |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| } |
| |
| rphy->clk480m_hw.init = &init; |
| |
| /* register the clock */ |
| rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw); |
| if (IS_ERR(rphy->clk480m)) { |
| ret = PTR_ERR(rphy->clk480m); |
| goto err_ret; |
| } |
| |
| ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m); |
| if (ret < 0) |
| goto err_clk_provider; |
| |
| ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister, |
| rphy); |
| if (ret < 0) |
| goto err_unreg_action; |
| |
| return 0; |
| |
| err_unreg_action: |
| of_clk_del_provider(node); |
| err_clk_provider: |
| clk_unregister(rphy->clk480m); |
| err_ret: |
| return ret; |
| } |
| |
| static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy) |
| { |
| int ret; |
| struct device_node *node = rphy->dev->of_node; |
| struct extcon_dev *edev; |
| |
| if (of_property_read_bool(node, "extcon")) { |
| edev = extcon_get_edev_by_phandle(rphy->dev, 0); |
| if (IS_ERR(edev)) { |
| if (PTR_ERR(edev) != -EPROBE_DEFER) |
| dev_err(rphy->dev, "Invalid or missing extcon\n"); |
| return PTR_ERR(edev); |
| } |
| } else { |
| /* Initialize extcon device */ |
| edev = devm_extcon_dev_allocate(rphy->dev, |
| rockchip_usb2phy_extcon_cable); |
| |
| if (IS_ERR(edev)) |
| return -ENOMEM; |
| |
| ret = devm_extcon_dev_register(rphy->dev, edev); |
| if (ret) { |
| dev_err(rphy->dev, "failed to register extcon device\n"); |
| return ret; |
| } |
| } |
| |
| rphy->edev = edev; |
| |
| return 0; |
| } |
| |
| static int rockchip_usb2phy_init(struct phy *phy) |
| { |
| struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); |
| int ret = 0; |
| |
| mutex_lock(&rport->mutex); |
| |
| if (rport->port_id == USB2PHY_PORT_OTG) { |
| if (rport->mode != USB_DR_MODE_HOST) { |
| /* clear bvalid status and enable bvalid detect irq */ |
| ret = property_enable(rphy, |
| &rport->port_cfg->bvalid_det_clr, |
| true); |
| if (ret) |
| goto out; |
| |
| ret = property_enable(rphy, |
| &rport->port_cfg->bvalid_det_en, |
| true); |
| if (ret) |
| goto out; |
| |
| schedule_delayed_work(&rport->otg_sm_work, |
| OTG_SCHEDULE_DELAY); |
| } else { |
| /* If OTG works in host only mode, do nothing. */ |
| dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); |
| } |
| } else if (rport->port_id == USB2PHY_PORT_HOST) { |
| /* clear linestate and enable linestate detect irq */ |
| ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); |
| if (ret) |
| goto out; |
| |
| ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); |
| if (ret) |
| goto out; |
| |
| schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); |
| } |
| |
| out: |
| mutex_unlock(&rport->mutex); |
| return ret; |
| } |
| |
| static int rockchip_usb2phy_power_on(struct phy *phy) |
| { |
| struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); |
| int ret; |
| |
| dev_dbg(&rport->phy->dev, "port power on\n"); |
| |
| if (!rport->suspended) |
| return 0; |
| |
| ret = clk_prepare_enable(rphy->clk480m); |
| if (ret) |
| return ret; |
| |
| ret = property_enable(rphy, &rport->port_cfg->phy_sus, false); |
| if (ret) |
| return ret; |
| |
| rport->suspended = false; |
| return 0; |
| } |
| |
| static int rockchip_usb2phy_power_off(struct phy *phy) |
| { |
| struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); |
| int ret; |
| |
| dev_dbg(&rport->phy->dev, "port power off\n"); |
| |
| if (rport->suspended) |
| return 0; |
| |
| ret = property_enable(rphy, &rport->port_cfg->phy_sus, true); |
| if (ret) |
| return ret; |
| |
| rport->suspended = true; |
| clk_disable_unprepare(rphy->clk480m); |
| |
| return 0; |
| } |
| |
| static int rockchip_usb2phy_exit(struct phy *phy) |
| { |
| struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); |
| |
| if (rport->port_id == USB2PHY_PORT_OTG && |
| rport->mode != USB_DR_MODE_HOST) { |
| cancel_delayed_work_sync(&rport->otg_sm_work); |
| cancel_delayed_work_sync(&rport->chg_work); |
| } else if (rport->port_id == USB2PHY_PORT_HOST) |
| cancel_delayed_work_sync(&rport->sm_work); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops rockchip_usb2phy_ops = { |
| .init = rockchip_usb2phy_init, |
| .exit = rockchip_usb2phy_exit, |
| .power_on = rockchip_usb2phy_power_on, |
| .power_off = rockchip_usb2phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) |
| { |
| struct rockchip_usb2phy_port *rport = |
| container_of(work, struct rockchip_usb2phy_port, |
| otg_sm_work.work); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); |
| static unsigned int cable; |
| unsigned long delay; |
| bool vbus_attach, sch_work, notify_charger; |
| |
| if (rport->utmi_avalid) |
| vbus_attach = |
| property_enabled(rphy, &rport->port_cfg->utmi_avalid); |
| else |
| vbus_attach = |
| property_enabled(rphy, &rport->port_cfg->utmi_bvalid); |
| |
| sch_work = false; |
| notify_charger = false; |
| delay = OTG_SCHEDULE_DELAY; |
| dev_dbg(&rport->phy->dev, "%s otg sm work\n", |
| usb_otg_state_string(rport->state)); |
| |
| switch (rport->state) { |
| case OTG_STATE_UNDEFINED: |
| rport->state = OTG_STATE_B_IDLE; |
| if (!vbus_attach) |
| rockchip_usb2phy_power_off(rport->phy); |
| /* fall through */ |
| case OTG_STATE_B_IDLE: |
| if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) { |
| dev_dbg(&rport->phy->dev, "usb otg host connect\n"); |
| rport->state = OTG_STATE_A_HOST; |
| rockchip_usb2phy_power_on(rport->phy); |
| return; |
| } else if (vbus_attach) { |
| dev_dbg(&rport->phy->dev, "vbus_attach\n"); |
| switch (rphy->chg_state) { |
| case USB_CHG_STATE_UNDEFINED: |
| schedule_delayed_work(&rport->chg_work, 0); |
| return; |
| case USB_CHG_STATE_DETECTED: |
| switch (rphy->chg_type) { |
| case POWER_SUPPLY_TYPE_USB: |
| dev_dbg(&rport->phy->dev, |
| "sdp cable is connecetd\n"); |
| rockchip_usb2phy_power_on(rport->phy); |
| rport->state = OTG_STATE_B_PERIPHERAL; |
| notify_charger = true; |
| sch_work = true; |
| cable = EXTCON_CHG_USB_SDP; |
| break; |
| case POWER_SUPPLY_TYPE_USB_DCP: |
| dev_dbg(&rport->phy->dev, |
| "dcp cable is connecetd\n"); |
| rockchip_usb2phy_power_off(rport->phy); |
| notify_charger = true; |
| sch_work = true; |
| cable = EXTCON_CHG_USB_DCP; |
| break; |
| case POWER_SUPPLY_TYPE_USB_CDP: |
| dev_dbg(&rport->phy->dev, |
| "cdp cable is connecetd\n"); |
| rockchip_usb2phy_power_on(rport->phy); |
| rport->state = OTG_STATE_B_PERIPHERAL; |
| notify_charger = true; |
| sch_work = true; |
| cable = EXTCON_CHG_USB_CDP; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } else { |
| notify_charger = true; |
| rphy->chg_state = USB_CHG_STATE_UNDEFINED; |
| rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; |
| } |
| |
| if (rport->vbus_attached != vbus_attach) { |
| rport->vbus_attached = vbus_attach; |
| |
| if (notify_charger && rphy->edev) |
| extcon_set_cable_state_(rphy->edev, |
| cable, vbus_attach); |
| } |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| if (!vbus_attach) { |
| dev_dbg(&rport->phy->dev, "usb disconnect\n"); |
| rphy->chg_state = USB_CHG_STATE_UNDEFINED; |
| rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; |
| rport->state = OTG_STATE_B_IDLE; |
| delay = 0; |
| rockchip_usb2phy_power_off(rport->phy); |
| } |
| sch_work = true; |
| break; |
| case OTG_STATE_A_HOST: |
| if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) { |
| dev_dbg(&rport->phy->dev, "usb otg host disconnect\n"); |
| rport->state = OTG_STATE_B_IDLE; |
| rockchip_usb2phy_power_off(rport->phy); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (sch_work) |
| schedule_delayed_work(&rport->otg_sm_work, delay); |
| } |
| |
| static const char *chg_to_string(enum power_supply_type chg_type) |
| { |
| switch (chg_type) { |
| case POWER_SUPPLY_TYPE_USB: |
| return "USB_SDP_CHARGER"; |
| case POWER_SUPPLY_TYPE_USB_DCP: |
| return "USB_DCP_CHARGER"; |
| case POWER_SUPPLY_TYPE_USB_CDP: |
| return "USB_CDP_CHARGER"; |
| default: |
| return "INVALID_CHARGER"; |
| } |
| } |
| |
| static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy, |
| bool en) |
| { |
| property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en); |
| property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en); |
| } |
| |
| static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy, |
| bool en) |
| { |
| property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en); |
| property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en); |
| } |
| |
| static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy, |
| bool en) |
| { |
| property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en); |
| property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en); |
| } |
| |
| #define CHG_DCD_POLL_TIME (100 * HZ / 1000) |
| #define CHG_DCD_MAX_RETRIES 6 |
| #define CHG_PRIMARY_DET_TIME (40 * HZ / 1000) |
| #define CHG_SECONDARY_DET_TIME (40 * HZ / 1000) |
| static void rockchip_chg_detect_work(struct work_struct *work) |
| { |
| struct rockchip_usb2phy_port *rport = |
| container_of(work, struct rockchip_usb2phy_port, chg_work.work); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); |
| bool is_dcd, tmout, vout; |
| unsigned long delay; |
| |
| dev_dbg(&rport->phy->dev, "chg detection work state = %d\n", |
| rphy->chg_state); |
| switch (rphy->chg_state) { |
| case USB_CHG_STATE_UNDEFINED: |
| if (!rport->suspended) |
| rockchip_usb2phy_power_off(rport->phy); |
| /* put the controller in non-driving mode */ |
| property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false); |
| /* Start DCD processing stage 1 */ |
| rockchip_chg_enable_dcd(rphy, true); |
| rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; |
| rphy->dcd_retries = 0; |
| delay = CHG_DCD_POLL_TIME; |
| break; |
| case USB_CHG_STATE_WAIT_FOR_DCD: |
| /* get data contact detection status */ |
| is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det); |
| tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES; |
| /* stage 2 */ |
| if (is_dcd || tmout) { |
| /* stage 4 */ |
| /* Turn off DCD circuitry */ |
| rockchip_chg_enable_dcd(rphy, false); |
| /* Voltage Source on DP, Probe on DM */ |
| rockchip_chg_enable_primary_det(rphy, true); |
| delay = CHG_PRIMARY_DET_TIME; |
| rphy->chg_state = USB_CHG_STATE_DCD_DONE; |
| } else { |
| /* stage 3 */ |
| delay = CHG_DCD_POLL_TIME; |
| } |
| break; |
| case USB_CHG_STATE_DCD_DONE: |
| vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det); |
| rockchip_chg_enable_primary_det(rphy, false); |
| if (vout) { |
| /* Voltage Source on DM, Probe on DP */ |
| rockchip_chg_enable_secondary_det(rphy, true); |
| delay = CHG_SECONDARY_DET_TIME; |
| rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE; |
| } else { |
| if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) { |
| /* floating charger found */ |
| rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; |
| rphy->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| } else { |
| rphy->chg_type = POWER_SUPPLY_TYPE_USB; |
| rphy->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| } |
| } |
| break; |
| case USB_CHG_STATE_PRIMARY_DONE: |
| vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det); |
| /* Turn off voltage source */ |
| rockchip_chg_enable_secondary_det(rphy, false); |
| if (vout) |
| rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; |
| else |
| rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP; |
| /* fall through */ |
| case USB_CHG_STATE_SECONDARY_DONE: |
| rphy->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| /* fall through */ |
| case USB_CHG_STATE_DETECTED: |
| /* put the controller in normal mode */ |
| property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true); |
| rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); |
| dev_info(&rport->phy->dev, "charger = %s\n", |
| chg_to_string(rphy->chg_type)); |
| return; |
| default: |
| return; |
| } |
| |
| schedule_delayed_work(&rport->chg_work, delay); |
| } |
| |
| /* |
| * The function manage host-phy port state and suspend/resume phy port |
| * to save power. |
| * |
| * we rely on utmi_linestate and utmi_hostdisconnect to identify whether |
| * devices is disconnect or not. Besides, we do not need care it is FS/LS |
| * disconnected or HS disconnected, actually, we just only need get the |
| * device is disconnected at last through rearm the delayed work, |
| * to suspend the phy port in _PHY_STATE_DISCONNECT_ case. |
| * |
| * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke |
| * some clk related APIs, so do not invoke it from interrupt context directly. |
| */ |
| static void rockchip_usb2phy_sm_work(struct work_struct *work) |
| { |
| struct rockchip_usb2phy_port *rport = |
| container_of(work, struct rockchip_usb2phy_port, sm_work.work); |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); |
| unsigned int sh = rport->port_cfg->utmi_hstdet.bitend - |
| rport->port_cfg->utmi_hstdet.bitstart + 1; |
| unsigned int ul, uhd, state; |
| unsigned int ul_mask, uhd_mask; |
| int ret; |
| |
| mutex_lock(&rport->mutex); |
| |
| ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul); |
| if (ret < 0) |
| goto next_schedule; |
| |
| ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, |
| &uhd); |
| if (ret < 0) |
| goto next_schedule; |
| |
| uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend, |
| rport->port_cfg->utmi_hstdet.bitstart); |
| ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend, |
| rport->port_cfg->utmi_ls.bitstart); |
| |
| /* stitch on utmi_ls and utmi_hstdet as phy state */ |
| state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) | |
| (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh); |
| |
| switch (state) { |
| case PHY_STATE_HS_ONLINE: |
| dev_dbg(&rport->phy->dev, "HS online\n"); |
| break; |
| case PHY_STATE_FS_LS_ONLINE: |
| /* |
| * For FS/LS device, the online state share with connect state |
| * from utmi_ls and utmi_hstdet register, so we distinguish |
| * them via suspended flag. |
| * |
| * Plus, there are two cases, one is D- Line pull-up, and D+ |
| * line pull-down, the state is 4; another is D+ line pull-up, |
| * and D- line pull-down, the state is 2. |
| */ |
| if (!rport->suspended) { |
| /* D- line pull-up, D+ line pull-down */ |
| dev_dbg(&rport->phy->dev, "FS/LS online\n"); |
| break; |
| } |
| /* fall through */ |
| case PHY_STATE_CONNECT: |
| if (rport->suspended) { |
| dev_dbg(&rport->phy->dev, "Connected\n"); |
| rockchip_usb2phy_power_on(rport->phy); |
| rport->suspended = false; |
| } else { |
| /* D+ line pull-up, D- line pull-down */ |
| dev_dbg(&rport->phy->dev, "FS/LS online\n"); |
| } |
| break; |
| case PHY_STATE_DISCONNECT: |
| if (!rport->suspended) { |
| dev_dbg(&rport->phy->dev, "Disconnected\n"); |
| rockchip_usb2phy_power_off(rport->phy); |
| rport->suspended = true; |
| } |
| |
| /* |
| * activate the linestate detection to get the next device |
| * plug-in irq. |
| */ |
| property_enable(rphy, &rport->port_cfg->ls_det_clr, true); |
| property_enable(rphy, &rport->port_cfg->ls_det_en, true); |
| |
| /* |
| * we don't need to rearm the delayed work when the phy port |
| * is suspended. |
| */ |
| mutex_unlock(&rport->mutex); |
| return; |
| default: |
| dev_dbg(&rport->phy->dev, "unknown phy state\n"); |
| break; |
| } |
| |
| next_schedule: |
| mutex_unlock(&rport->mutex); |
| schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); |
| } |
| |
| static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) |
| { |
| struct rockchip_usb2phy_port *rport = data; |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); |
| |
| if (!property_enabled(rphy, &rport->port_cfg->ls_det_st)) |
| return IRQ_NONE; |
| |
| mutex_lock(&rport->mutex); |
| |
| /* disable linestate detect irq and clear its status */ |
| property_enable(rphy, &rport->port_cfg->ls_det_en, false); |
| property_enable(rphy, &rport->port_cfg->ls_det_clr, true); |
| |
| mutex_unlock(&rport->mutex); |
| |
| /* |
| * In this case for host phy port, a new device is plugged in, |
| * meanwhile, if the phy port is suspended, we need rearm the work to |
| * resume it and mange its states; otherwise, we do nothing about that. |
| */ |
| if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST) |
| rockchip_usb2phy_sm_work(&rport->sm_work.work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data) |
| { |
| struct rockchip_usb2phy_port *rport = data; |
| struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); |
| |
| if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st)) |
| return IRQ_NONE; |
| |
| mutex_lock(&rport->mutex); |
| |
| /* clear bvalid detect irq pending status */ |
| property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true); |
| |
| mutex_unlock(&rport->mutex); |
| |
| rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, |
| struct rockchip_usb2phy_port *rport, |
| struct device_node *child_np) |
| { |
| int ret; |
| |
| rport->port_id = USB2PHY_PORT_HOST; |
| rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST]; |
| rport->suspended = true; |
| |
| mutex_init(&rport->mutex); |
| INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work); |
| |
| rport->ls_irq = of_irq_get_byname(child_np, "linestate"); |
| if (rport->ls_irq < 0) { |
| dev_err(rphy->dev, "no linestate irq provided\n"); |
| return rport->ls_irq; |
| } |
| |
| ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL, |
| rockchip_usb2phy_linestate_irq, |
| IRQF_ONESHOT, |
| "rockchip_usb2phy", rport); |
| if (ret) { |
| dev_err(rphy->dev, "failed to request linestate irq handle\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_otg_event(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct rockchip_usb2phy_port *rport = |
| container_of(nb, struct rockchip_usb2phy_port, event_nb); |
| |
| schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, |
| struct rockchip_usb2phy_port *rport, |
| struct device_node *child_np) |
| { |
| int ret; |
| |
| rport->port_id = USB2PHY_PORT_OTG; |
| rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; |
| rport->state = OTG_STATE_UNDEFINED; |
| |
| /* |
| * set suspended flag to true, but actually don't |
| * put phy in suspend mode, it aims to enable usb |
| * phy and clock in power_on() called by usb controller |
| * driver during probe. |
| */ |
| rport->suspended = true; |
| rport->vbus_attached = false; |
| |
| mutex_init(&rport->mutex); |
| |
| rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1); |
| if (rport->mode == USB_DR_MODE_HOST) { |
| ret = 0; |
| goto out; |
| } |
| |
| INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); |
| INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); |
| |
| rport->utmi_avalid = |
| of_property_read_bool(child_np, "rockchip,utmi-avalid"); |
| |
| rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid"); |
| if (rport->bvalid_irq < 0) { |
| dev_err(rphy->dev, "no vbus valid irq provided\n"); |
| ret = rport->bvalid_irq; |
| goto out; |
| } |
| |
| ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL, |
| rockchip_usb2phy_bvalid_irq, |
| IRQF_ONESHOT, |
| "rockchip_usb2phy_bvalid", rport); |
| if (ret) { |
| dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n"); |
| goto out; |
| } |
| |
| if (!IS_ERR(rphy->edev)) { |
| rport->event_nb.notifier_call = rockchip_otg_event; |
| |
| ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST, |
| &rport->event_nb); |
| if (ret) |
| dev_err(rphy->dev, "register USB HOST notifier failed\n"); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int rockchip_usb2phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct device_node *child_np; |
| struct phy_provider *provider; |
| struct rockchip_usb2phy *rphy; |
| const struct rockchip_usb2phy_cfg *phy_cfgs; |
| const struct of_device_id *match; |
| unsigned int reg; |
| int index, ret; |
| |
| rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL); |
| if (!rphy) |
| return -ENOMEM; |
| |
| match = of_match_device(dev->driver->of_match_table, dev); |
| if (!match || !match->data) { |
| dev_err(dev, "phy configs are not assigned!\n"); |
| return -EINVAL; |
| } |
| |
| if (!dev->parent || !dev->parent->of_node) |
| return -EINVAL; |
| |
| rphy->grf = syscon_node_to_regmap(dev->parent->of_node); |
| if (IS_ERR(rphy->grf)) |
| return PTR_ERR(rphy->grf); |
| |
| if (of_property_read_u32(np, "reg", ®)) { |
| dev_err(dev, "the reg property is not assigned in %s node\n", |
| np->name); |
| return -EINVAL; |
| } |
| |
| rphy->dev = dev; |
| phy_cfgs = match->data; |
| rphy->chg_state = USB_CHG_STATE_UNDEFINED; |
| rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; |
| platform_set_drvdata(pdev, rphy); |
| |
| ret = rockchip_usb2phy_extcon_register(rphy); |
| if (ret) |
| return ret; |
| |
| /* find out a proper config which can be matched with dt. */ |
| index = 0; |
| while (phy_cfgs[index].reg) { |
| if (phy_cfgs[index].reg == reg) { |
| rphy->phy_cfg = &phy_cfgs[index]; |
| break; |
| } |
| |
| ++index; |
| } |
| |
| if (!rphy->phy_cfg) { |
| dev_err(dev, "no phy-config can be matched with %s node\n", |
| np->name); |
| return -EINVAL; |
| } |
| |
| rphy->clk = of_clk_get_by_name(np, "phyclk"); |
| if (!IS_ERR(rphy->clk)) { |
| clk_prepare_enable(rphy->clk); |
| } else { |
| dev_info(&pdev->dev, "no phyclk specified\n"); |
| rphy->clk = NULL; |
| } |
| |
| ret = rockchip_usb2phy_clk480m_register(rphy); |
| if (ret) { |
| dev_err(dev, "failed to register 480m output clock\n"); |
| goto disable_clks; |
| } |
| |
| index = 0; |
| for_each_available_child_of_node(np, child_np) { |
| struct rockchip_usb2phy_port *rport = &rphy->ports[index]; |
| struct phy *phy; |
| |
| /* This driver aims to support both otg-port and host-port */ |
| if (of_node_cmp(child_np->name, "host-port") && |
| of_node_cmp(child_np->name, "otg-port")) |
| goto next_child; |
| |
| phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); |
| if (IS_ERR(phy)) { |
| dev_err(dev, "failed to create phy\n"); |
| ret = PTR_ERR(phy); |
| goto put_child; |
| } |
| |
| rport->phy = phy; |
| phy_set_drvdata(rport->phy, rport); |
| |
| /* initialize otg/host port separately */ |
| if (!of_node_cmp(child_np->name, "host-port")) { |
| ret = rockchip_usb2phy_host_port_init(rphy, rport, |
| child_np); |
| if (ret) |
| goto put_child; |
| } else { |
| ret = rockchip_usb2phy_otg_port_init(rphy, rport, |
| child_np); |
| if (ret) |
| goto put_child; |
| } |
| |
| next_child: |
| /* to prevent out of boundary */ |
| if (++index >= rphy->phy_cfg->num_ports) |
| break; |
| } |
| |
| provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| return PTR_ERR_OR_ZERO(provider); |
| |
| put_child: |
| of_node_put(child_np); |
| disable_clks: |
| if (rphy->clk) { |
| clk_disable_unprepare(rphy->clk); |
| clk_put(rphy->clk); |
| } |
| return ret; |
| } |
| |
| static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { |
| { |
| .reg = 0x700, |
| .num_ports = 2, |
| .clkout_ctl = { 0x0724, 15, 15, 1, 0 }, |
| .port_cfgs = { |
| [USB2PHY_PORT_HOST] = { |
| .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 }, |
| .ls_det_en = { 0x0680, 4, 4, 0, 1 }, |
| .ls_det_st = { 0x0690, 4, 4, 0, 1 }, |
| .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }, |
| .utmi_ls = { 0x049c, 14, 13, 0, 1 }, |
| .utmi_hstdet = { 0x049c, 12, 12, 0, 1 } |
| } |
| }, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { |
| { |
| .reg = 0xe450, |
| .num_ports = 2, |
| .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, |
| .port_cfgs = { |
| [USB2PHY_PORT_OTG] = { |
| .phy_sus = { 0xe454, 1, 0, 2, 1 }, |
| .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, |
| .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, |
| .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, |
| .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, |
| .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, |
| }, |
| [USB2PHY_PORT_HOST] = { |
| .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, |
| .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, |
| .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, |
| .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, |
| .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, |
| .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } |
| } |
| }, |
| .chg_det = { |
| .opmode = { 0xe454, 3, 0, 5, 1 }, |
| .cp_det = { 0xe2ac, 2, 2, 0, 1 }, |
| .dcp_det = { 0xe2ac, 1, 1, 0, 1 }, |
| .dp_det = { 0xe2ac, 0, 0, 0, 1 }, |
| .idm_sink_en = { 0xe450, 8, 8, 0, 1 }, |
| .idp_sink_en = { 0xe450, 7, 7, 0, 1 }, |
| .idp_src_en = { 0xe450, 9, 9, 0, 1 }, |
| .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 }, |
| .vdm_src_en = { 0xe450, 12, 12, 0, 1 }, |
| .vdp_src_en = { 0xe450, 11, 11, 0, 1 }, |
| }, |
| }, |
| { |
| .reg = 0xe460, |
| .num_ports = 2, |
| .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, |
| .port_cfgs = { |
| [USB2PHY_PORT_OTG] = { |
| .phy_sus = { 0xe464, 1, 0, 2, 1 }, |
| .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, |
| .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, |
| .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, |
| .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, |
| .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, |
| }, |
| [USB2PHY_PORT_HOST] = { |
| .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, |
| .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, |
| .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, |
| .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, |
| .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, |
| .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } |
| } |
| }, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| static const struct of_device_id rockchip_usb2phy_dt_match[] = { |
| { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, |
| { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match); |
| |
| static struct platform_driver rockchip_usb2phy_driver = { |
| .probe = rockchip_usb2phy_probe, |
| .driver = { |
| .name = "rockchip-usb2phy", |
| .of_match_table = rockchip_usb2phy_dt_match, |
| }, |
| }; |
| module_platform_driver(rockchip_usb2phy_driver); |
| |
| MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>"); |
| MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver"); |
| MODULE_LICENSE("GPL v2"); |