bgmac: driver for GBit MAC core on BCMA bus
BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA
based SoCs have gigabit ethernet provided by the GBit MAC core. This
patch adds driver for such a cores registering itself as a netdev. It
has been tested on a BCM4706 and BCM4718 chipsets.
In the kernel tree there is already b44 driver which has some common
things with bgmac, however there are many differences that has led to
the decision or writing a new driver:
1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44)
2) There is 64bit DMA engine which differs from 32bit one
3) There is no CAM (Content Addressable Memory) in GBit MAC
4) We have 4 TX queues on GBit MAC devices (instead of 1)
5) Many registers have different addresses/values
6) RX header flags are also different
The driver in it's state is functional how, however there is of course
place for improvements:
1) Supporting more net_device_ops
2) SUpporting more ethtool_ops
3) Unaligned addressing in DMA
4) Writing separated PHY driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
new file mode 100644
index 0000000..9bd33db
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -0,0 +1,1422 @@
+/*
+ * Driver for (BCM4706)? GBit MAC core on BCMA bus.
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bgmac.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <asm/mach-bcm47xx/nvram.h>
+
+static const struct bcma_device_id bgmac_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
+
+static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
+ u32 value, int timeout)
+{
+ u32 val;
+ int i;
+
+ for (i = 0; i < timeout / 10; i++) {
+ val = bcma_read32(core, reg);
+ if ((val & mask) == value)
+ return true;
+ udelay(10);
+ }
+ pr_err("Timeout waiting for reg 0x%X\n", reg);
+ return false;
+}
+
+/**************************************************
+ * DMA
+ **************************************************/
+
+static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ u32 val;
+ int i;
+
+ if (!ring->mmio_base)
+ return;
+
+ /* Suspend DMA TX ring first.
+ * bgmac_wait_value doesn't support waiting for any of few values, so
+ * implement whole loop here.
+ */
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL,
+ BGMAC_DMA_TX_SUSPEND);
+ for (i = 0; i < 10000 / 10; i++) {
+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ val &= BGMAC_DMA_TX_STAT;
+ if (val == BGMAC_DMA_TX_STAT_DISABLED ||
+ val == BGMAC_DMA_TX_STAT_IDLEWAIT ||
+ val == BGMAC_DMA_TX_STAT_STOPPED) {
+ i = 0;
+ break;
+ }
+ udelay(10);
+ }
+ if (i)
+ bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n",
+ ring->mmio_base, val);
+
+ /* Remove SUSPEND bit */
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0);
+ if (!bgmac_wait_value(bgmac->core,
+ ring->mmio_base + BGMAC_DMA_TX_STATUS,
+ BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED,
+ 10000)) {
+ bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n",
+ ring->mmio_base);
+ udelay(300);
+ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED)
+ bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n",
+ ring->mmio_base);
+ }
+}
+
+static void bgmac_dma_tx_enable(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ u32 ctl;
+
+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
+ ctl |= BGMAC_DMA_TX_ENABLE;
+ ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
+}
+
+static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring,
+ struct sk_buff *skb)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct net_device *net_dev = bgmac->net_dev;
+ struct bgmac_dma_desc *dma_desc;
+ struct bgmac_slot_info *slot;
+ u32 ctl0, ctl1;
+ int free_slots;
+
+ if (skb->len > BGMAC_DESC_CTL1_LEN) {
+ bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
+ goto err_stop_drop;
+ }
+
+ if (ring->start <= ring->end)
+ free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
+ else
+ free_slots = ring->start - ring->end;
+ if (free_slots == 1) {
+ bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
+ netif_stop_queue(net_dev);
+ return NETDEV_TX_BUSY;
+ }
+
+ slot = &ring->slots[ring->end];
+ slot->skb = skb;
+ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_dev, slot->dma_addr)) {
+ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
+ ring->mmio_base);
+ goto err_stop_drop;
+ }
+
+ ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
+ if (ring->end == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+ ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
+
+ dma_desc = ring->cpu_base;
+ dma_desc += ring->end;
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+
+ wmb();
+
+ /* Increase ring->end to point empty slot. We tell hardware the first
+ * slot it should *not* read.
+ */
+ if (++ring->end >= BGMAC_TX_RING_SLOTS)
+ ring->end = 0;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
+ ring->end * sizeof(struct bgmac_dma_desc));
+
+ /* Always keep one slot free to allow detecting bugged calls. */
+ if (--free_slots == 1)
+ netif_stop_queue(net_dev);
+
+ return NETDEV_TX_OK;
+
+err_stop_drop:
+ netif_stop_queue(net_dev);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+/* Free transmitted packets */
+static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ int empty_slot;
+ bool freed = false;
+
+ /* The last slot that hardware didn't consume yet */
+ empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
+ empty_slot &= BGMAC_DMA_TX_STATDPTR;
+ empty_slot /= sizeof(struct bgmac_dma_desc);
+
+ while (ring->start != empty_slot) {
+ struct bgmac_slot_info *slot = &ring->slots[ring->start];
+
+ if (slot->skb) {
+ /* Unmap no longer used buffer */
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ slot->skb->len, DMA_TO_DEVICE);
+ slot->dma_addr = 0;
+
+ /* Free memory! :) */
+ dev_kfree_skb(slot->skb);
+ slot->skb = NULL;
+ } else {
+ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
+ ring->start, ring->end);
+ }
+
+ if (++ring->start >= BGMAC_TX_RING_SLOTS)
+ ring->start = 0;
+ freed = true;
+ }
+
+ if (freed && netif_queue_stopped(bgmac->net_dev))
+ netif_wake_queue(bgmac->net_dev);
+}
+
+static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
+{
+ if (!ring->mmio_base)
+ return;
+
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0);
+ if (!bgmac_wait_value(bgmac->core,
+ ring->mmio_base + BGMAC_DMA_RX_STATUS,
+ BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED,
+ 10000))
+ bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n",
+ ring->mmio_base);
+}
+
+static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ u32 ctl;
+
+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
+ ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
+ ctl |= BGMAC_DMA_RX_ENABLE;
+ ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
+ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
+ ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT;
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl);
+}
+
+static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
+ struct bgmac_slot_info *slot)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_rx_header *rx;
+
+ /* Alloc skb */
+ slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
+ if (!slot->skb) {
+ bgmac_err(bgmac, "Allocation of skb failed!\n");
+ return -ENOMEM;
+ }
+
+ /* Poison - if everything goes fine, hardware will overwrite it */
+ rx = (struct bgmac_rx_header *)slot->skb->data;
+ rx->len = cpu_to_le16(0xdead);
+ rx->flags = cpu_to_le16(0xbeef);
+
+ /* Map skb for the DMA */
+ slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dma_dev, slot->dma_addr)) {
+ bgmac_err(bgmac, "DMA mapping error\n");
+ return -ENOMEM;
+ }
+ if (slot->dma_addr & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+
+ return 0;
+}
+
+static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
+ int weight)
+{
+ u32 end_slot;
+ int handled = 0;
+
+ end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS);
+ end_slot &= BGMAC_DMA_RX_STATDPTR;
+ end_slot /= sizeof(struct bgmac_dma_desc);
+
+ ring->end = end_slot;
+
+ while (ring->start != ring->end) {
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_slot_info *slot = &ring->slots[ring->start];
+ struct sk_buff *skb = slot->skb;
+ struct sk_buff *new_skb;
+ struct bgmac_rx_header *rx;
+ u16 len, flags;
+
+ /* Unmap buffer to make it accessible to the CPU */
+ dma_sync_single_for_cpu(dma_dev, slot->dma_addr,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+
+ /* Get info from the header */
+ rx = (struct bgmac_rx_header *)skb->data;
+ len = le16_to_cpu(rx->len);
+ flags = le16_to_cpu(rx->flags);
+
+ /* Check for poison and drop or pass the packet */
+ if (len == 0xdead && flags == 0xbeef) {
+ bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
+ ring->start);
+ } else {
+ new_skb = netdev_alloc_skb(bgmac->net_dev, len);
+ if (new_skb) {
+ skb_put(new_skb, len);
+ skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET,
+ new_skb->data,
+ len);
+ new_skb->protocol =
+ eth_type_trans(new_skb, bgmac->net_dev);
+ netif_receive_skb(new_skb);
+ handled++;
+ } else {
+ bgmac->net_dev->stats.rx_dropped++;
+ bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n");
+ }
+
+ /* Poison the old skb */
+ rx->len = cpu_to_le16(0xdead);
+ rx->flags = cpu_to_le16(0xbeef);
+ }
+
+ /* Make it back accessible to the hardware */
+ dma_sync_single_for_device(dma_dev, slot->dma_addr,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+
+ if (++ring->start >= BGMAC_RX_RING_SLOTS)
+ ring->start = 0;
+
+ if (handled >= weight) /* Should never be greater */
+ break;
+ }
+
+ return handled;
+}
+
+/* Does ring support unaligned addressing? */
+static bool bgmac_dma_unaligned(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring,
+ enum bgmac_dma_ring_type ring_type)
+{
+ switch (ring_type) {
+ case BGMAC_DMA_RING_TX:
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
+ 0xff0);
+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO))
+ return true;
+ break;
+ case BGMAC_DMA_RING_RX:
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
+ 0xff0);
+ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO))
+ return true;
+ break;
+ }
+ return false;
+}
+
+static void bgmac_dma_ring_free(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_slot_info *slot;
+ int size;
+ int i;
+
+ for (i = 0; i < ring->num_slots; i++) {
+ slot = &ring->slots[i];
+ if (slot->skb) {
+ if (slot->dma_addr)
+ dma_unmap_single(dma_dev, slot->dma_addr,
+ slot->skb->len, DMA_TO_DEVICE);
+ dev_kfree_skb(slot->skb);
+ }
+ }
+
+ if (ring->cpu_base) {
+ /* Free ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ dma_free_coherent(dma_dev, size, ring->cpu_base,
+ ring->dma_base);
+ }
+}
+
+static void bgmac_dma_free(struct bgmac *bgmac)
+{
+ int i;
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
+ bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]);
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
+ bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]);
+}
+
+static int bgmac_dma_alloc(struct bgmac *bgmac)
+{
+ struct device *dma_dev = bgmac->core->dma_dev;
+ struct bgmac_dma_ring *ring;
+ static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1,
+ BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, };
+ int size; /* ring size: different for Tx and Rx */
+ int err;
+ int i;
+
+ BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
+ BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
+
+ if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) {
+ bgmac_err(bgmac, "Core does not report 64-bit DMA\n");
+ return -ENOTSUPP;
+ }
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ ring = &bgmac->tx_ring[i];
+ ring->num_slots = BGMAC_TX_RING_SLOTS;
+ ring->mmio_base = ring_base[i];
+ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX))
+ bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n",
+ ring->mmio_base);
+
+ /* Alloc ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
+ &ring->dma_base,
+ GFP_KERNEL);
+ if (!ring->cpu_base) {
+ bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n",
+ ring->mmio_base);
+ goto err_dma_free;
+ }
+ if (ring->dma_base & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+
+ /* No need to alloc TX slots yet */
+ }
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+ ring->num_slots = BGMAC_RX_RING_SLOTS;
+ ring->mmio_base = ring_base[i];
+ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX))
+ bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n",
+ ring->mmio_base);
+
+ /* Alloc ring of descriptors */
+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
+ ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
+ &ring->dma_base,
+ GFP_KERNEL);
+ if (!ring->cpu_base) {
+ bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n",
+ ring->mmio_base);
+ err = -ENOMEM;
+ goto err_dma_free;
+ }
+ if (ring->dma_base & 0xC0000000)
+ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
+
+ /* Alloc RX slots */
+ for (i = 0; i < ring->num_slots; i++) {
+ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]);
+ if (err) {
+ bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n");
+ goto err_dma_free;
+ }
+ }
+ }
+
+ return 0;
+
+err_dma_free:
+ bgmac_dma_free(bgmac);
+ return -ENOMEM;
+}
+
+static void bgmac_dma_init(struct bgmac *bgmac)
+{
+ struct bgmac_dma_ring *ring;
+ struct bgmac_dma_desc *dma_desc;
+ u32 ctl0, ctl1;
+ int i;
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
+ ring = &bgmac->tx_ring[i];
+
+ /* We don't implement unaligned addressing, so enable first */
+ bgmac_dma_tx_enable(bgmac, ring);
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
+ lower_32_bits(ring->dma_base));
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI,
+ upper_32_bits(ring->dma_base));
+
+ ring->start = 0;
+ ring->end = 0; /* Points the slot that should *not* be read */
+ }
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+
+ /* We don't implement unaligned addressing, so enable first */
+ bgmac_dma_rx_enable(bgmac, ring);
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
+ lower_32_bits(ring->dma_base));
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
+ upper_32_bits(ring->dma_base));
+
+ for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots;
+ i++, dma_desc++) {
+ ctl0 = ctl1 = 0;
+
+ if (i == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
+ /* Is there any BGMAC device that requires extension? */
+ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
+ * B43_DMA64_DCTL1_ADDREXT_MASK;
+ */
+
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+ }
+
+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
+ ring->num_slots * sizeof(struct bgmac_dma_desc));
+
+ ring->start = 0;
+ ring->end = 0;
+ }
+}
+
+/**************************************************
+ * PHY ops
+ **************************************************/
+
+u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
+{
+ struct bcma_device *core;
+ u16 phy_access_addr;
+ u16 phy_ctl_addr;
+ u32 tmp;
+
+ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK);
+ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK);
+ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT);
+ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK);
+ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT);
+ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE);
+ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START);
+ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK);
+ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK);
+ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
+ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
+ core = bgmac->core->bus->drv_gmac_cmn.core;
+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
+ } else {
+ core = bgmac->core;
+ phy_access_addr = BGMAC_PHY_ACCESS;
+ phy_ctl_addr = BGMAC_PHY_CNTL;
+ }
+
+ tmp = bcma_read32(core, phy_ctl_addr);
+ tmp &= ~BGMAC_PC_EPA_MASK;
+ tmp |= phyaddr;
+ bcma_write32(core, phy_ctl_addr, tmp);
+
+ tmp = BGMAC_PA_START;
+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
+ tmp |= reg << BGMAC_PA_REG_SHIFT;
+ bcma_write32(core, phy_access_addr, tmp);
+
+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
+ bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n",
+ phyaddr, reg);
+ return 0xffff;
+ }
+
+ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK;
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
+void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
+{
+ struct bcma_device *core;
+ u16 phy_access_addr;
+ u16 phy_ctl_addr;
+ u32 tmp;
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
+ core = bgmac->core->bus->drv_gmac_cmn.core;
+ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
+ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
+ } else {
+ core = bgmac->core;
+ phy_access_addr = BGMAC_PHY_ACCESS;
+ phy_ctl_addr = BGMAC_PHY_CNTL;
+ }
+
+ tmp = bcma_read32(core, phy_ctl_addr);
+ tmp &= ~BGMAC_PC_EPA_MASK;
+ tmp |= phyaddr;
+ bcma_write32(core, phy_ctl_addr, tmp);
+
+ bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
+ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
+ bgmac_warn(bgmac, "Error setting MDIO int\n");
+
+ tmp = BGMAC_PA_START;
+ tmp |= BGMAC_PA_WRITE;
+ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
+ tmp |= reg << BGMAC_PA_REG_SHIFT;
+ tmp |= value;
+ bcma_write32(core, phy_access_addr, tmp);
+
+ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000))
+ bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
+ phyaddr, reg);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
+static void bgmac_phy_force(struct bgmac *bgmac)
+{
+ u16 ctl;
+ u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
+ BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
+
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ if (bgmac->autoneg)
+ return;
+
+ ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
+ ctl &= mask;
+ if (bgmac->full_duplex)
+ ctl |= BGMAC_PHY_CTL_DUPLEX;
+ if (bgmac->speed == BGMAC_SPEED_100)
+ ctl |= BGMAC_PHY_CTL_SPEED_100;
+ else if (bgmac->speed == BGMAC_SPEED_1000)
+ ctl |= BGMAC_PHY_CTL_SPEED_1000;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
+static void bgmac_phy_advertise(struct bgmac *bgmac)
+{
+ u16 adv;
+
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ if (!bgmac->autoneg)
+ return;
+
+ /* Adv selected 10/100 speeds */
+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
+ adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
+ BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
+ adv |= BGMAC_PHY_ADV_10HALF;
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
+ adv |= BGMAC_PHY_ADV_100HALF;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
+ adv |= BGMAC_PHY_ADV_10FULL;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
+ adv |= BGMAC_PHY_ADV_100FULL;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
+
+ /* Adv selected 1000 speeds */
+ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
+ adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
+ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
+ adv |= BGMAC_PHY_ADV2_1000HALF;
+ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
+ adv |= BGMAC_PHY_ADV2_1000FULL;
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
+
+ /* Restart */
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
+ bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
+ BGMAC_PHY_CTL_RESTART);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
+static void bgmac_phy_init(struct bgmac *bgmac)
+{
+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
+ u8 i;
+
+ if (ci->id == BCMA_CHIP_ID_BCM5356) {
+ for (i = 0; i < 5; i++) {
+ bgmac_phy_write(bgmac, i, 0x1f, 0x008b);
+ bgmac_phy_write(bgmac, i, 0x15, 0x0100);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x12, 0x2aaa);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ }
+ }
+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
+ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
+ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
+ for (i = 0; i < 5; i++) {
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x16, 0x5284);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ bgmac_phy_write(bgmac, i, 0x17, 0x0010);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
+ bgmac_phy_write(bgmac, i, 0x16, 0x5296);
+ bgmac_phy_write(bgmac, i, 0x17, 0x1073);
+ bgmac_phy_write(bgmac, i, 0x17, 0x9073);
+ bgmac_phy_write(bgmac, i, 0x16, 0x52b6);
+ bgmac_phy_write(bgmac, i, 0x17, 0x9273);
+ bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
+ }
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
+static void bgmac_phy_reset(struct bgmac *bgmac)
+{
+ if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
+ return;
+
+ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
+ BGMAC_PHY_CTL_RESET);
+ udelay(100);
+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
+ BGMAC_PHY_CTL_RESET)
+ bgmac_err(bgmac, "PHY reset failed\n");
+ bgmac_phy_init(bgmac);
+}
+
+/**************************************************
+ * Chip ops
+ **************************************************/
+
+/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
+ * nothing to change? Try if after stabilizng driver.
+ */
+static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
+ bool force)
+{
+ u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
+ u32 new_val = (cmdcfg & mask) | set;
+
+ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
+ udelay(2);
+
+ if (new_val != cmdcfg || force)
+ bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
+
+ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
+ udelay(2);
+}
+
+#if 0 /* We don't use that regs yet */
+static void bgmac_chip_stats_update(struct bgmac *bgmac)
+{
+ int i;
+
+ if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) {
+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
+ bgmac->mib_tx_regs[i] =
+ bgmac_read(bgmac,
+ BGMAC_TX_GOOD_OCTETS + (i * 4));
+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
+ bgmac->mib_rx_regs[i] =
+ bgmac_read(bgmac,
+ BGMAC_RX_GOOD_OCTETS + (i * 4));
+ }
+
+ /* TODO: what else? how to handle BCM4706? Specs are needed */
+}
+#endif
+
+static void bgmac_clear_mib(struct bgmac *bgmac)
+{
+ int i;
+
+ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT)
+ return;
+
+ bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR);
+ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
+ bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4));
+ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
+ bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4));
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
+static void bgmac_speed(struct bgmac *bgmac, int speed)
+{
+ u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
+ u32 set = 0;
+
+ if (speed & BGMAC_SPEED_10)
+ set |= BGMAC_CMDCFG_ES_10;
+ if (speed & BGMAC_SPEED_100)
+ set |= BGMAC_CMDCFG_ES_100;
+ if (speed & BGMAC_SPEED_1000)
+ set |= BGMAC_CMDCFG_ES_1000;
+ if (!bgmac->full_duplex)
+ set |= BGMAC_CMDCFG_HD;
+ bgmac_cmdcfg_maskset(bgmac, mask, set, true);
+}
+
+static void bgmac_miiconfig(struct bgmac *bgmac)
+{
+ u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
+ BGMAC_DS_MM_SHIFT;
+ if (imode == 0 || imode == 1) {
+ if (bgmac->autoneg)
+ bgmac_speed(bgmac, BGMAC_SPEED_100);
+ else
+ bgmac_speed(bgmac, bgmac->speed);
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
+static void bgmac_chip_reset(struct bgmac *bgmac)
+{
+ struct bcma_device *core = bgmac->core;
+ struct bcma_bus *bus = core->bus;
+ struct bcma_chipinfo *ci = &bus->chipinfo;
+ u32 flags = 0;
+ u32 iost;
+ int i;
+
+ if (bcma_core_is_enabled(core)) {
+ if (!bgmac->stats_grabbed) {
+ /* bgmac_chip_stats_update(bgmac); */
+ bgmac->stats_grabbed = true;
+ }
+
+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
+ bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
+
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
+ udelay(1);
+
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
+ bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
+
+ /* TODO: Clear software multicast filter list */
+ }
+
+ iost = bcma_aread32(core, BCMA_IOST);
+ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
+ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
+ iost &= ~BGMAC_BCMA_IOST_ATTACHED;
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+ if (!bgmac->has_robosw)
+ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+ }
+
+ bcma_core_enable(core, flags);
+
+ if (core->id.rev > 2) {
+ bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
+ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
+ 1000);
+ }
+
+ if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
+ ci->id == BCMA_CHIP_ID_BCM53572) {
+ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
+ u8 et_swtype = 0;
+ u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
+ BGMAC_CHIPCTL_1_IF_TYPE_RMII;
+ char buf[2];
+
+ if (nvram_getenv("et_swtype", buf, 1) > 0) {
+ if (kstrtou8(buf, 0, &et_swtype))
+ bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
+ buf);
+ et_swtype &= 0x0f;
+ et_swtype <<= 4;
+ sw_type = et_swtype;
+ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
+ sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
+ } else if (0) {
+ /* TODO */
+ }
+ bcma_chipco_chipctl_maskset(cc, 1,
+ ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
+ BGMAC_CHIPCTL_1_SW_TYPE_MASK),
+ sw_type);
+ }
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
+ bcma_awrite32(core, BCMA_IOCTL,
+ bcma_aread32(core, BCMA_IOCTL) &
+ ~BGMAC_BCMA_IOCTL_SW_RESET);
+
+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
+ * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
+ * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
+ * be keps until taking MAC out of the reset.
+ */
+ bgmac_cmdcfg_maskset(bgmac,
+ ~(BGMAC_CMDCFG_TE |
+ BGMAC_CMDCFG_RE |
+ BGMAC_CMDCFG_RPI |
+ BGMAC_CMDCFG_TAI |
+ BGMAC_CMDCFG_HD |
+ BGMAC_CMDCFG_ML |
+ BGMAC_CMDCFG_CFE |
+ BGMAC_CMDCFG_RL |
+ BGMAC_CMDCFG_RED |
+ BGMAC_CMDCFG_PE |
+ BGMAC_CMDCFG_TPI |
+ BGMAC_CMDCFG_PAD_EN |
+ BGMAC_CMDCFG_PF),
+ BGMAC_CMDCFG_PROM |
+ BGMAC_CMDCFG_NLC |
+ BGMAC_CMDCFG_CFE |
+ BGMAC_CMDCFG_SR,
+ false);
+
+ bgmac_clear_mib(bgmac);
+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
+ bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
+ BCMA_GMAC_CMN_PC_MTE);
+ else
+ bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
+ bgmac_miiconfig(bgmac);
+ bgmac_phy_init(bgmac);
+
+ bgmac->int_status = 0;
+}
+
+static void bgmac_chip_intrs_on(struct bgmac *bgmac)
+{
+ bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask);
+}
+
+static void bgmac_chip_intrs_off(struct bgmac *bgmac)
+{
+ bgmac_write(bgmac, BGMAC_INT_MASK, 0);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
+static void bgmac_enable(struct bgmac *bgmac)
+{
+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
+ u32 cmdcfg;
+ u32 mode;
+ u32 rxq_ctl;
+ u32 fl_ctl;
+ u16 bp_clk;
+ u8 mdp;
+
+ cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
+ bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
+ BGMAC_CMDCFG_SR, true);
+ udelay(2);
+ cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
+ bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
+
+ mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
+ BGMAC_DS_MM_SHIFT;
+ if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
+ bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+ if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
+ bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
+ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
+
+ switch (ci->id) {
+ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM4749:
+ case BCMA_CHIP_ID_BCM53572:
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM47162:
+ fl_ctl = 0x03cb04cb;
+ if (ci->id == BCMA_CHIP_ID_BCM5357 ||
+ ci->id == BCMA_CHIP_ID_BCM4749 ||
+ ci->id == BCMA_CHIP_ID_BCM53572)
+ fl_ctl = 0x2300e1;
+ bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
+ bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
+ break;
+ }
+
+ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
+ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
+ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
+ mdp = (bp_clk * 128 / 1000) - 3;
+ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
+ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+}
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
+static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
+{
+ struct bgmac_dma_ring *ring;
+ u8 *mac = bgmac->net_dev->dev_addr;
+ u32 tmp;
+ int i;
+
+ /* 1 interrupt per received frame */
+ bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
+
+ /* Enable 802.3x tx flow control (honor received PAUSE frames) */
+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
+
+ if (bgmac->net_dev->flags & IFF_PROMISC)
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false);
+ else
+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false);
+
+ /* Set MAC addr */
+ tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
+ tmp = (mac[4] << 8) | mac[5];
+ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
+
+ if (bgmac->loopback)
+ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true);
+ else
+ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true);
+
+ bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
+
+ if (!bgmac->autoneg) {
+ bgmac_speed(bgmac, bgmac->speed);
+ bgmac_phy_force(bgmac);
+ } else if (bgmac->speed) { /* if there is anything to adv */
+ bgmac_phy_advertise(bgmac);
+ }
+
+ if (full_init) {
+ bgmac_dma_init(bgmac);
+ if (1) /* FIXME: is there any case we don't want IRQs? */
+ bgmac_chip_intrs_on(bgmac);
+ } else {
+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
+ ring = &bgmac->rx_ring[i];
+ bgmac_dma_rx_enable(bgmac, ring);
+ }
+ }
+
+ bgmac_enable(bgmac);
+}
+
+static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
+{
+ struct bgmac *bgmac = netdev_priv(dev_id);
+
+ u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS);
+ int_status &= bgmac->int_mask;
+
+ if (!int_status)
+ return IRQ_NONE;
+
+ /* Ack */
+ bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
+
+ /* Disable new interrupts until handling existing ones */
+ bgmac_chip_intrs_off(bgmac);
+
+ bgmac->int_status = int_status;
+
+ napi_schedule(&bgmac->napi);
+
+ return IRQ_HANDLED;
+}
+
+static int bgmac_poll(struct napi_struct *napi, int weight)
+{
+ struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
+ struct bgmac_dma_ring *ring;
+ int handled = 0;
+
+ if (bgmac->int_status & BGMAC_IS_TX0) {
+ ring = &bgmac->tx_ring[0];
+ bgmac_dma_tx_free(bgmac, ring);
+ bgmac->int_status &= ~BGMAC_IS_TX0;
+ }
+
+ if (bgmac->int_status & BGMAC_IS_RX) {
+ ring = &bgmac->rx_ring[0];
+ handled += bgmac_dma_rx_read(bgmac, ring, weight);
+ bgmac->int_status &= ~BGMAC_IS_RX;
+ }
+
+ if (bgmac->int_status) {
+ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
+ bgmac->int_status = 0;
+ }
+
+ if (handled < weight)
+ napi_complete(napi);
+
+ bgmac_chip_intrs_on(bgmac);
+
+ return handled;
+}
+
+/**************************************************
+ * net_device_ops
+ **************************************************/
+
+static int bgmac_open(struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+ int err = 0;
+
+ bgmac_chip_reset(bgmac);
+ /* Specs say about reclaiming rings here, but we do that in DMA init */
+ bgmac_chip_init(bgmac, true);
+
+ err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED,
+ KBUILD_MODNAME, net_dev);
+ if (err < 0) {
+ bgmac_err(bgmac, "IRQ request error: %d!\n", err);
+ goto err_out;
+ }
+ napi_enable(&bgmac->napi);
+
+ netif_carrier_on(net_dev);
+
+err_out:
+ return err;
+}
+
+static int bgmac_stop(struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+
+ netif_carrier_off(net_dev);
+
+ napi_disable(&bgmac->napi);
+ bgmac_chip_intrs_off(bgmac);
+ free_irq(bgmac->core->irq, net_dev);
+
+ bgmac_chip_reset(bgmac);
+
+ return 0;
+}
+
+static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+ struct bgmac_dma_ring *ring;
+
+ /* No QOS support yet */
+ ring = &bgmac->tx_ring[0];
+ return bgmac_dma_tx_add(bgmac, ring, skb);
+}
+
+static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = bgmac->phyaddr;
+ /* fallthru */
+ case SIOCGMIIREG:
+ if (!netif_running(net_dev))
+ return -EAGAIN;
+ data->val_out = bgmac_phy_read(bgmac, data->phy_id,
+ data->reg_num & 0x1f);
+ return 0;
+ case SIOCSMIIREG:
+ if (!netif_running(net_dev))
+ return -EAGAIN;
+ bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
+ data->val_in);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static const struct net_device_ops bgmac_netdev_ops = {
+ .ndo_open = bgmac_open,
+ .ndo_stop = bgmac_stop,
+ .ndo_start_xmit = bgmac_start_xmit,
+ .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */
+ .ndo_do_ioctl = bgmac_ioctl,
+};
+
+/**************************************************
+ * ethtool_ops
+ **************************************************/
+
+static int bgmac_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+
+ cmd->supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg;
+
+ if (bgmac->autoneg) {
+ WARN_ON(cmd->advertising);
+ if (bgmac->full_duplex) {
+ if (bgmac->speed & BGMAC_SPEED_10)
+ cmd->advertising |= ADVERTISED_10baseT_Full;
+ if (bgmac->speed & BGMAC_SPEED_100)
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+ if (bgmac->speed & BGMAC_SPEED_1000)
+ cmd->advertising |= ADVERTISED_1000baseT_Full;
+ } else {
+ if (bgmac->speed & BGMAC_SPEED_10)
+ cmd->advertising |= ADVERTISED_10baseT_Half;
+ if (bgmac->speed & BGMAC_SPEED_100)
+ cmd->advertising |= ADVERTISED_100baseT_Half;
+ if (bgmac->speed & BGMAC_SPEED_1000)
+ cmd->advertising |= ADVERTISED_1000baseT_Half;
+ }
+ } else {
+ switch (bgmac->speed) {
+ case BGMAC_SPEED_10:
+ ethtool_cmd_speed_set(cmd, SPEED_10);
+ break;
+ case BGMAC_SPEED_100:
+ ethtool_cmd_speed_set(cmd, SPEED_100);
+ break;
+ case BGMAC_SPEED_1000:
+ ethtool_cmd_speed_set(cmd, SPEED_1000);
+ break;
+ }
+ }
+
+ cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+
+ cmd->autoneg = bgmac->autoneg;
+
+ return 0;
+}
+
+#if 0
+static int bgmac_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct bgmac *bgmac = netdev_priv(net_dev);
+
+ return -1;
+}
+#endif
+
+static void bgmac_get_drvinfo(struct net_device *net_dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+ strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info));
+}
+
+static const struct ethtool_ops bgmac_ethtool_ops = {
+ .get_settings = bgmac_get_settings,
+ .get_drvinfo = bgmac_get_drvinfo,
+};
+
+/**************************************************
+ * BCMA bus ops
+ **************************************************/
+
+/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
+static int bgmac_probe(struct bcma_device *core)
+{
+ struct net_device *net_dev;
+ struct bgmac *bgmac;
+ struct ssb_sprom *sprom = &core->bus->sprom;
+ u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac;
+ int err;
+
+ /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
+ if (core->core_unit > 1) {
+ pr_err("Unsupported core_unit %d\n", core->core_unit);
+ return -ENOTSUPP;
+ }
+
+ /* Allocation and references */
+ net_dev = alloc_etherdev(sizeof(*bgmac));
+ if (!net_dev)
+ return -ENOMEM;
+ net_dev->netdev_ops = &bgmac_netdev_ops;
+ net_dev->irq = core->irq;
+ SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops);
+ bgmac = netdev_priv(net_dev);
+ bgmac->net_dev = net_dev;
+ bgmac->core = core;
+ bcma_set_drvdata(core, bgmac);
+
+ /* Defaults */
+ bgmac->autoneg = true;
+ bgmac->full_duplex = true;
+ bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
+ memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
+
+ /* On BCM4706 we need common core to access PHY */
+ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
+ !core->bus->drv_gmac_cmn.core) {
+ bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
+ err = -ENODEV;
+ goto err_netdev_free;
+ }
+ bgmac->cmn = core->bus->drv_gmac_cmn.core;
+
+ bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
+ sprom->et0phyaddr;
+ bgmac->phyaddr &= BGMAC_PHY_MASK;
+ if (bgmac->phyaddr == BGMAC_PHY_MASK) {
+ bgmac_err(bgmac, "No PHY found\n");
+ err = -ENODEV;
+ goto err_netdev_free;
+ }
+ bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
+ bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
+
+ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
+ bgmac_err(bgmac, "PCI setup not implemented\n");
+ err = -ENOTSUPP;
+ goto err_netdev_free;
+ }
+
+ bgmac_chip_reset(bgmac);
+
+ err = bgmac_dma_alloc(bgmac);
+ if (err) {
+ bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
+ goto err_netdev_free;
+ }
+
+ bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
+ if (nvram_getenv("et0_no_txint", NULL, 0) == 0)
+ bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
+
+ /* TODO: reset the external phy. Specs are needed */
+ bgmac_phy_reset(bgmac);
+
+ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
+ BGMAC_BFL_ENETROBO);
+ if (bgmac->has_robosw)
+ bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
+
+ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
+ bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
+
+ err = register_netdev(bgmac->net_dev);
+ if (err) {
+ bgmac_err(bgmac, "Cannot register net device\n");
+ err = -ENOTSUPP;
+ goto err_dma_free;
+ }
+
+ netif_carrier_off(net_dev);
+
+ netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
+
+ return 0;
+
+err_dma_free:
+ bgmac_dma_free(bgmac);
+
+err_netdev_free:
+ bcma_set_drvdata(core, NULL);
+ free_netdev(net_dev);
+
+ return err;
+}
+
+static void bgmac_remove(struct bcma_device *core)
+{
+ struct bgmac *bgmac = bcma_get_drvdata(core);
+
+ netif_napi_del(&bgmac->napi);
+ unregister_netdev(bgmac->net_dev);
+ bgmac_dma_free(bgmac);
+ bcma_set_drvdata(core, NULL);
+ free_netdev(bgmac->net_dev);
+}
+
+static struct bcma_driver bgmac_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bgmac_bcma_tbl,
+ .probe = bgmac_probe,
+ .remove = bgmac_remove,
+};
+
+static int __init bgmac_init(void)
+{
+ int err;
+
+ err = bcma_driver_register(&bgmac_bcma_driver);
+ if (err)
+ return err;
+ pr_info("Broadcom 47xx GBit MAC driver loaded\n");
+
+ return 0;
+}
+
+static void __exit bgmac_exit(void)
+{
+ bcma_driver_unregister(&bgmac_bcma_driver);
+}
+
+module_init(bgmac_init)
+module_exit(bgmac_exit)
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");