[SCSI] mvsas: split driver into multiple files
Split mvsas driver into multiple source codes, based on the split
and function distribution found in Marvell's mvsas update.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 0000000..7a954a9
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,205 @@
+/*
+ mv_sas.h - Marvell 88SE6440 SAS/SATA support
+
+ Copyright 2007 Red Hat, Inc.
+ Copyright 2008 Marvell. <kewei@marvell.com>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2,
+ or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty
+ of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public
+ License along with this program; see the file COPYING. If not,
+ write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+ MA 02139, USA.
+
+ */
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME "mvsas"
+#define DRV_VERSION "0.5.2"
+#define _MV_DUMP 0
+#define MVS_DISABLE_NVRAM
+#define MVS_DISABLE_MSI
+
+#define MVS_ID_NOT_MAPPED 0x7f
+#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq, __rest) \
+ for ((__mc) = (__lseq_mask), (__lseq) = 0; \
+ (__mc) != 0 && __rest; \
+ (++__lseq), (__mc) >>= 1)
+
+struct mvs_chip_info {
+ u32 n_phy;
+ u32 srs_sz;
+ u32 slot_width;
+};
+
+struct mvs_err_info {
+ __le32 flags;
+ __le32 flags2;
+};
+
+struct mvs_cmd_hdr {
+ __le32 flags; /* PRD tbl len; SAS, SATA ctl */
+ __le32 lens; /* cmd, max resp frame len */
+ __le32 tags; /* targ port xfer tag; tag */
+ __le32 data_len; /* data xfer len */
+ __le64 cmd_tbl; /* command table address */
+ __le64 open_frame; /* open addr frame address */
+ __le64 status_buf; /* status buffer address */
+ __le64 prd_tbl; /* PRD tbl address */
+ __le32 reserved[4];
+};
+
+struct mvs_port {
+ struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 taskfileset;
+ u8 wide_port_phymap;
+ struct list_head list;
+};
+
+struct mvs_phy {
+ struct mvs_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct scsi_device *sdev;
+ u64 dev_sas_addr;
+ u64 att_dev_sas_addr;
+ u32 att_dev_info;
+ u32 dev_info;
+ u32 phy_type;
+ u32 phy_status;
+ u32 irq_status;
+ u32 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_slot_info {
+ struct list_head list;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 tx;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+#if _MV_DUMP
+ u32 cmd_size;
+#endif
+
+ void *response;
+ struct mvs_port *port;
+};
+
+struct mvs_info {
+ unsigned long flags;
+
+ /* host-wide lock */
+ spinlock_t lock;
+
+ /* our device */
+ struct pci_dev *pdev;
+
+ /* enhanced mode registers */
+ void __iomem *regs;
+
+ /* peripheral registers */
+ void __iomem *peri_regs;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct sas;
+ struct Scsi_Host *shost;
+
+ /* TX (delivery) DMA ring */
+ __le32 *tx;
+ dma_addr_t tx_dma;
+
+ /* cached next-producer idx */
+ u32 tx_prod;
+
+ /* RX (completion) DMA ring */
+ __le32 *rx;
+ dma_addr_t rx_dma;
+
+ /* RX consumer idx */
+ u32 rx_cons;
+
+ /* RX'd FIS area */
+ __le32 *rx_fis;
+ dma_addr_t rx_fis_dma;
+
+ /* DMA command header slots */
+ struct mvs_cmd_hdr *slot;
+ dma_addr_t slot_dma;
+
+ const struct mvs_chip_info *chip;
+
+ u8 tags[MVS_SLOTS];
+ struct mvs_slot_info slot_info[MVS_SLOTS];
+ /* further per-slot information */
+ struct mvs_phy phy[MVS_MAX_PHYS];
+ struct mvs_port port[MVS_MAX_PHYS];
+#ifdef MVS_USE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
+};
+
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags);
+int mvs_task_abort(struct sas_task *task);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+void mvs_int_full(struct mvs_info *mvi);
+void mvs_tag_init(struct mvs_info *mvi);
+int mvs_nvram_read(struct mvs_info *mvi, u32 addr, void *buf, u32 buflen);
+int __devinit mvs_hw_init(struct mvs_info *mvi);
+void __devinit mvs_print_info(struct mvs_info *mvi);
+void mvs_hba_interrupt_enable(struct mvs_info *mvi);
+void mvs_hba_interrupt_disable(struct mvs_info *mvi);
+void mvs_detect_porttype(struct mvs_info *mvi, int i);
+u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port);
+void mvs_enable_xmt(struct mvs_info *mvi, int PhyId);
+void __devinit mvs_phy_hacks(struct mvs_info *mvi);
+void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port);
+
+#endif