drm/i915: vlv: add runtime PM support
Add runtime PM support for VLV, but leave it disabled. The next patch
enables it.
The suspend/resume sequence used is based on [1] and [2]. In practice we
depend on the GT RC6 mechanism to save the HW context depending on the
render and media power wells. By the time we run the runtime suspend
callback the display side is also off and the HW context for that is
managed by the display power domain framework.
Besides the above there are Gunit registers that depend on a system-wide
power well. This power well goes off once the device enters any of the
S0i[R123] states. To handle this scenario, save/restore these Gunit
registers. Note that this is not the complete register set dictated by
[2], to remove some overhead, registers that are known not to be used are
ignored. Also some registers are fully setup by initialization functions
called during resume, these are not saved either. The list of registers
can be further reduced, see the TODO note in the code.
[1] VLV_gfx_clocking_PM_reset_y12w21d3 / "Driver D3 entry/exit"
[2] VLV2_S0IXRegs
v2:
- unchanged
v3:
- fix s/GEN6_PMIIR/GEN6_PMIMR/ typo when saving/restoring registers
(Ville)
v4:
- rebased on the previous patch fixing GEN register prefixes
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ rebased (according to v4) ]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index a1ebbb0..4024e16 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -939,6 +939,198 @@
return 0;
}
+/*
+ * Save all Gunit registers that may be lost after a D3 and a subsequent
+ * S0i[R123] transition. The list of registers needing a save/restore is
+ * defined in the VLV2_S0IXRegs document. This documents marks all Gunit
+ * registers in the following way:
+ * - Driver: saved/restored by the driver
+ * - Punit : saved/restored by the Punit firmware
+ * - No, w/o marking: no need to save/restore, since the register is R/O or
+ * used internally by the HW in a way that doesn't depend
+ * keeping the content across a suspend/resume.
+ * - Debug : used for debugging
+ *
+ * We save/restore all registers marked with 'Driver', with the following
+ * exceptions:
+ * - Registers out of use, including also registers marked with 'Debug'.
+ * These have no effect on the driver's operation, so we don't save/restore
+ * them to reduce the overhead.
+ * - Registers that are fully setup by an initialization function called from
+ * the resume path. For example many clock gating and RPS/RC6 registers.
+ * - Registers that provide the right functionality with their reset defaults.
+ *
+ * TODO: Except for registers that based on the above 3 criteria can be safely
+ * ignored, we save/restore all others, practically treating the HW context as
+ * a black-box for the driver. Further investigation is needed to reduce the
+ * saved/restored registers even further, by following the same 3 criteria.
+ */
+static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv)
+{
+ struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
+ int i;
+
+ /* GAM 0x4000-0x4770 */
+ s->wr_watermark = I915_READ(GEN7_WR_WATERMARK);
+ s->gfx_prio_ctrl = I915_READ(GEN7_GFX_PRIO_CTRL);
+ s->arb_mode = I915_READ(ARB_MODE);
+ s->gfx_pend_tlb0 = I915_READ(GEN7_GFX_PEND_TLB0);
+ s->gfx_pend_tlb1 = I915_READ(GEN7_GFX_PEND_TLB1);
+
+ for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
+ s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS_BASE + i * 4);
+
+ s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
+ s->gfx_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
+
+ s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7);
+ s->ecochk = I915_READ(GAM_ECOCHK);
+ s->bsd_hwsp = I915_READ(BSD_HWS_PGA_GEN7);
+ s->blt_hwsp = I915_READ(BLT_HWS_PGA_GEN7);
+
+ s->tlb_rd_addr = I915_READ(GEN7_TLB_RD_ADDR);
+
+ /* MBC 0x9024-0x91D0, 0x8500 */
+ s->g3dctl = I915_READ(VLV_G3DCTL);
+ s->gsckgctl = I915_READ(VLV_GSCKGCTL);
+ s->mbctl = I915_READ(GEN6_MBCTL);
+
+ /* GCP 0x9400-0x9424, 0x8100-0x810C */
+ s->ucgctl1 = I915_READ(GEN6_UCGCTL1);
+ s->ucgctl3 = I915_READ(GEN6_UCGCTL3);
+ s->rcgctl1 = I915_READ(GEN6_RCGCTL1);
+ s->rcgctl2 = I915_READ(GEN6_RCGCTL2);
+ s->rstctl = I915_READ(GEN6_RSTCTL);
+ s->misccpctl = I915_READ(GEN7_MISCCPCTL);
+
+ /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
+ s->gfxpause = I915_READ(GEN6_GFXPAUSE);
+ s->rpdeuhwtc = I915_READ(GEN6_RPDEUHWTC);
+ s->rpdeuc = I915_READ(GEN6_RPDEUC);
+ s->ecobus = I915_READ(ECOBUS);
+ s->pwrdwnupctl = I915_READ(VLV_PWRDWNUPCTL);
+ s->rp_down_timeout = I915_READ(GEN6_RP_DOWN_TIMEOUT);
+ s->rp_deucsw = I915_READ(GEN6_RPDEUCSW);
+ s->rcubmabdtmr = I915_READ(GEN6_RCUBMABDTMR);
+ s->rcedata = I915_READ(VLV_RCEDATA);
+ s->spare2gh = I915_READ(VLV_SPAREG2H);
+
+ /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
+ s->gt_imr = I915_READ(GTIMR);
+ s->gt_ier = I915_READ(GTIER);
+ s->pm_imr = I915_READ(GEN6_PMIMR);
+ s->pm_ier = I915_READ(GEN6_PMIER);
+
+ for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
+ s->gt_scratch[i] = I915_READ(GEN7_GT_SCRATCH_BASE + i * 4);
+
+ /* GT SA CZ domain, 0x100000-0x138124 */
+ s->tilectl = I915_READ(TILECTL);
+ s->gt_fifoctl = I915_READ(GTFIFOCTL);
+ s->gtlc_wake_ctrl = I915_READ(VLV_GTLC_WAKE_CTRL);
+ s->gtlc_survive = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
+ s->pmwgicz = I915_READ(VLV_PMWGICZ);
+
+ /* Gunit-Display CZ domain, 0x182028-0x1821CF */
+ s->gu_ctl0 = I915_READ(VLV_GU_CTL0);
+ s->gu_ctl1 = I915_READ(VLV_GU_CTL1);
+ s->clock_gate_dis2 = I915_READ(VLV_GUNIT_CLOCK_GATE2);
+
+ /*
+ * Not saving any of:
+ * DFT, 0x9800-0x9EC0
+ * SARB, 0xB000-0xB1FC
+ * GAC, 0x5208-0x524C, 0x14000-0x14C000
+ * PCI CFG
+ */
+}
+
+static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv)
+{
+ struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
+ u32 val;
+ int i;
+
+ /* GAM 0x4000-0x4770 */
+ I915_WRITE(GEN7_WR_WATERMARK, s->wr_watermark);
+ I915_WRITE(GEN7_GFX_PRIO_CTRL, s->gfx_prio_ctrl);
+ I915_WRITE(ARB_MODE, s->arb_mode | (0xffff << 16));
+ I915_WRITE(GEN7_GFX_PEND_TLB0, s->gfx_pend_tlb0);
+ I915_WRITE(GEN7_GFX_PEND_TLB1, s->gfx_pend_tlb1);
+
+ for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
+ I915_WRITE(GEN7_LRA_LIMITS_BASE + i * 4, s->lra_limits[i]);
+
+ I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count);
+ I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->gfx_max_req_count);
+
+ I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp);
+ I915_WRITE(GAM_ECOCHK, s->ecochk);
+ I915_WRITE(BSD_HWS_PGA_GEN7, s->bsd_hwsp);
+ I915_WRITE(BLT_HWS_PGA_GEN7, s->blt_hwsp);
+
+ I915_WRITE(GEN7_TLB_RD_ADDR, s->tlb_rd_addr);
+
+ /* MBC 0x9024-0x91D0, 0x8500 */
+ I915_WRITE(VLV_G3DCTL, s->g3dctl);
+ I915_WRITE(VLV_GSCKGCTL, s->gsckgctl);
+ I915_WRITE(GEN6_MBCTL, s->mbctl);
+
+ /* GCP 0x9400-0x9424, 0x8100-0x810C */
+ I915_WRITE(GEN6_UCGCTL1, s->ucgctl1);
+ I915_WRITE(GEN6_UCGCTL3, s->ucgctl3);
+ I915_WRITE(GEN6_RCGCTL1, s->rcgctl1);
+ I915_WRITE(GEN6_RCGCTL2, s->rcgctl2);
+ I915_WRITE(GEN6_RSTCTL, s->rstctl);
+ I915_WRITE(GEN7_MISCCPCTL, s->misccpctl);
+
+ /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
+ I915_WRITE(GEN6_GFXPAUSE, s->gfxpause);
+ I915_WRITE(GEN6_RPDEUHWTC, s->rpdeuhwtc);
+ I915_WRITE(GEN6_RPDEUC, s->rpdeuc);
+ I915_WRITE(ECOBUS, s->ecobus);
+ I915_WRITE(VLV_PWRDWNUPCTL, s->pwrdwnupctl);
+ I915_WRITE(GEN6_RP_DOWN_TIMEOUT,s->rp_down_timeout);
+ I915_WRITE(GEN6_RPDEUCSW, s->rp_deucsw);
+ I915_WRITE(GEN6_RCUBMABDTMR, s->rcubmabdtmr);
+ I915_WRITE(VLV_RCEDATA, s->rcedata);
+ I915_WRITE(VLV_SPAREG2H, s->spare2gh);
+
+ /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
+ I915_WRITE(GTIMR, s->gt_imr);
+ I915_WRITE(GTIER, s->gt_ier);
+ I915_WRITE(GEN6_PMIMR, s->pm_imr);
+ I915_WRITE(GEN6_PMIER, s->pm_ier);
+
+ for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
+ I915_WRITE(GEN7_GT_SCRATCH_BASE + i * 4, s->gt_scratch[i]);
+
+ /* GT SA CZ domain, 0x100000-0x138124 */
+ I915_WRITE(TILECTL, s->tilectl);
+ I915_WRITE(GTFIFOCTL, s->gt_fifoctl);
+ /*
+ * Preserve the GT allow wake and GFX force clock bit, they are not
+ * be restored, as they are used to control the s0ix suspend/resume
+ * sequence by the caller.
+ */
+ val = I915_READ(VLV_GTLC_WAKE_CTRL);
+ val &= VLV_GTLC_ALLOWWAKEREQ;
+ val |= s->gtlc_wake_ctrl & ~VLV_GTLC_ALLOWWAKEREQ;
+ I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
+
+ val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
+ val &= VLV_GFX_CLK_FORCE_ON_BIT;
+ val |= s->gtlc_survive & ~VLV_GFX_CLK_FORCE_ON_BIT;
+ I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
+
+ I915_WRITE(VLV_PMWGICZ, s->pmwgicz);
+
+ /* Gunit-Display CZ domain, 0x182028-0x1821CF */
+ I915_WRITE(VLV_GU_CTL0, s->gu_ctl0);
+ I915_WRITE(VLV_GU_CTL1, s->gu_ctl1);
+ I915_WRITE(VLV_GUNIT_CLOCK_GATE2, s->clock_gate_dis2);
+}
+
int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on)
{
u32 val;
@@ -976,6 +1168,137 @@
#undef COND
}
+static int vlv_allow_gt_wake(struct drm_i915_private *dev_priv, bool allow)
+{
+ u32 val;
+ int err = 0;
+
+ val = I915_READ(VLV_GTLC_WAKE_CTRL);
+ val &= ~VLV_GTLC_ALLOWWAKEREQ;
+ if (allow)
+ val |= VLV_GTLC_ALLOWWAKEREQ;
+ I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
+ POSTING_READ(VLV_GTLC_WAKE_CTRL);
+
+#define COND (!!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEACK) == \
+ allow)
+ err = wait_for(COND, 1);
+ if (err)
+ DRM_ERROR("timeout disabling GT waking\n");
+ return err;
+#undef COND
+}
+
+static int vlv_wait_for_gt_wells(struct drm_i915_private *dev_priv,
+ bool wait_for_on)
+{
+ u32 mask;
+ u32 val;
+ int err;
+
+ mask = VLV_GTLC_PW_MEDIA_STATUS_MASK | VLV_GTLC_PW_RENDER_STATUS_MASK;
+ val = wait_for_on ? mask : 0;
+#define COND ((I915_READ(VLV_GTLC_PW_STATUS) & mask) == val)
+ if (COND)
+ return 0;
+
+ DRM_DEBUG_KMS("waiting for GT wells to go %s (%08x)\n",
+ wait_for_on ? "on" : "off",
+ I915_READ(VLV_GTLC_PW_STATUS));
+
+ /*
+ * RC6 transitioning can be delayed up to 2 msec (see
+ * valleyview_enable_rps), use 3 msec for safety.
+ */
+ err = wait_for(COND, 3);
+ if (err)
+ DRM_ERROR("timeout waiting for GT wells to go %s\n",
+ wait_for_on ? "on" : "off");
+
+ return err;
+#undef COND
+}
+
+static void vlv_check_no_gt_access(struct drm_i915_private *dev_priv)
+{
+ if (!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEERR))
+ return;
+
+ DRM_ERROR("GT register access while GT waking disabled\n");
+ I915_WRITE(VLV_GTLC_PW_STATUS, VLV_GTLC_ALLOWWAKEERR);
+}
+
+static int vlv_runtime_suspend(struct drm_i915_private *dev_priv)
+{
+ u32 mask;
+ int err;
+
+ /*
+ * Bspec defines the following GT well on flags as debug only, so
+ * don't treat them as hard failures.
+ */
+ (void)vlv_wait_for_gt_wells(dev_priv, false);
+
+ mask = VLV_GTLC_RENDER_CTX_EXISTS | VLV_GTLC_MEDIA_CTX_EXISTS;
+ WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL) & mask) != mask);
+
+ vlv_check_no_gt_access(dev_priv);
+
+ err = vlv_force_gfx_clock(dev_priv, true);
+ if (err)
+ goto err1;
+
+ err = vlv_allow_gt_wake(dev_priv, false);
+ if (err)
+ goto err2;
+ vlv_save_gunit_s0ix_state(dev_priv);
+
+ err = vlv_force_gfx_clock(dev_priv, false);
+ if (err)
+ goto err2;
+
+ return 0;
+
+err2:
+ /* For safety always re-enable waking and disable gfx clock forcing */
+ vlv_allow_gt_wake(dev_priv, true);
+err1:
+ vlv_force_gfx_clock(dev_priv, false);
+
+ return err;
+}
+
+static int vlv_runtime_resume(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ int err;
+ int ret;
+
+ /*
+ * If any of the steps fail just try to continue, that's the best we
+ * can do at this point. Return the first error code (which will also
+ * leave RPM permanently disabled).
+ */
+ ret = vlv_force_gfx_clock(dev_priv, true);
+
+ vlv_restore_gunit_s0ix_state(dev_priv);
+
+ err = vlv_allow_gt_wake(dev_priv, true);
+ if (!ret)
+ ret = err;
+
+ err = vlv_force_gfx_clock(dev_priv, false);
+ if (!ret)
+ ret = err;
+
+ vlv_check_no_gt_access(dev_priv);
+
+ intel_init_clock_gating(dev);
+ i915_gem_restore_fences(dev);
+
+ return ret;
+}
+
static int intel_runtime_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
@@ -1003,6 +1326,8 @@
ret = 0;
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
ret = hsw_runtime_suspend(dev_priv);
+ } else if (IS_VALLEYVIEW(dev)) {
+ ret = vlv_runtime_suspend(dev_priv);
} else {
ret = -ENODEV;
WARN_ON(1);
@@ -1051,6 +1376,8 @@
ret = snb_runtime_resume(dev_priv);
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
ret = hsw_runtime_resume(dev_priv);
+ } else if (IS_VALLEYVIEW(dev)) {
+ ret = vlv_runtime_resume(dev_priv);
} else {
WARN_ON(1);
ret = -ENODEV;