| /* |
| * Copyright © 2006-2016 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * |
| */ |
| |
| /* |
| * This information is private to VBT parsing in intel_bios.c. |
| * |
| * Please do NOT include anywhere else. |
| */ |
| #ifndef _INTEL_BIOS_PRIVATE |
| #error "intel_vbt_defs.h is private to intel_bios.c" |
| #endif |
| |
| #ifndef _INTEL_VBT_DEFS_H_ |
| #define _INTEL_VBT_DEFS_H_ |
| |
| #include "intel_bios.h" |
| |
| /** |
| * struct vbt_header - VBT Header structure |
| * @signature: VBT signature, always starts with "$VBT" |
| * @version: Version of this structure |
| * @header_size: Size of this structure |
| * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks) |
| * @vbt_checksum: Checksum |
| * @reserved0: Reserved |
| * @bdb_offset: Offset of &struct bdb_header from beginning of VBT |
| * @aim_offset: Offsets of add-in data blocks from beginning of VBT |
| */ |
| struct vbt_header { |
| u8 signature[20]; |
| u16 version; |
| u16 header_size; |
| u16 vbt_size; |
| u8 vbt_checksum; |
| u8 reserved0; |
| u32 bdb_offset; |
| u32 aim_offset[4]; |
| } __packed; |
| |
| /** |
| * struct bdb_header - BDB Header structure |
| * @signature: BDB signature "BIOS_DATA_BLOCK" |
| * @version: Version of the data block definitions |
| * @header_size: Size of this structure |
| * @bdb_size: Size of BDB (BDB Header and data blocks) |
| */ |
| struct bdb_header { |
| u8 signature[16]; |
| u16 version; |
| u16 header_size; |
| u16 bdb_size; |
| } __packed; |
| |
| /* strictly speaking, this is a "skip" block, but it has interesting info */ |
| struct vbios_data { |
| u8 type; /* 0 == desktop, 1 == mobile */ |
| u8 relstage; |
| u8 chipset; |
| u8 lvds_present:1; |
| u8 tv_present:1; |
| u8 rsvd2:6; /* finish byte */ |
| u8 rsvd3[4]; |
| u8 signon[155]; |
| u8 copyright[61]; |
| u16 code_segment; |
| u8 dos_boot_mode; |
| u8 bandwidth_percent; |
| u8 rsvd4; /* popup memory size */ |
| u8 resize_pci_bios; |
| u8 rsvd5; /* is crt already on ddc2 */ |
| } __packed; |
| |
| /* |
| * There are several types of BIOS data blocks (BDBs), each block has |
| * an ID and size in the first 3 bytes (ID in first, size in next 2). |
| * Known types are listed below. |
| */ |
| #define BDB_GENERAL_FEATURES 1 |
| #define BDB_GENERAL_DEFINITIONS 2 |
| #define BDB_OLD_TOGGLE_LIST 3 |
| #define BDB_MODE_SUPPORT_LIST 4 |
| #define BDB_GENERIC_MODE_TABLE 5 |
| #define BDB_EXT_MMIO_REGS 6 |
| #define BDB_SWF_IO 7 |
| #define BDB_SWF_MMIO 8 |
| #define BDB_PSR 9 |
| #define BDB_MODE_REMOVAL_TABLE 10 |
| #define BDB_CHILD_DEVICE_TABLE 11 |
| #define BDB_DRIVER_FEATURES 12 |
| #define BDB_DRIVER_PERSISTENCE 13 |
| #define BDB_EXT_TABLE_PTRS 14 |
| #define BDB_DOT_CLOCK_OVERRIDE 15 |
| #define BDB_DISPLAY_SELECT 16 |
| /* 17 rsvd */ |
| #define BDB_DRIVER_ROTATION 18 |
| #define BDB_DISPLAY_REMOVE 19 |
| #define BDB_OEM_CUSTOM 20 |
| #define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ |
| #define BDB_SDVO_LVDS_OPTIONS 22 |
| #define BDB_SDVO_PANEL_DTDS 23 |
| #define BDB_SDVO_LVDS_PNP_IDS 24 |
| #define BDB_SDVO_LVDS_POWER_SEQ 25 |
| #define BDB_TV_OPTIONS 26 |
| #define BDB_EDP 27 |
| #define BDB_LVDS_OPTIONS 40 |
| #define BDB_LVDS_LFP_DATA_PTRS 41 |
| #define BDB_LVDS_LFP_DATA 42 |
| #define BDB_LVDS_BACKLIGHT 43 |
| #define BDB_LVDS_POWER 44 |
| #define BDB_MIPI_CONFIG 52 |
| #define BDB_MIPI_SEQUENCE 53 |
| #define BDB_SKIP 254 /* VBIOS private block, ignore */ |
| |
| struct bdb_general_features { |
| /* bits 1 */ |
| u8 panel_fitting:2; |
| u8 flexaim:1; |
| u8 msg_enable:1; |
| u8 clear_screen:3; |
| u8 color_flip:1; |
| |
| /* bits 2 */ |
| u8 download_ext_vbt:1; |
| u8 enable_ssc:1; |
| u8 ssc_freq:1; |
| u8 enable_lfp_on_override:1; |
| u8 disable_ssc_ddt:1; |
| u8 rsvd7:1; |
| u8 display_clock_mode:1; |
| u8 rsvd8:1; /* finish byte */ |
| |
| /* bits 3 */ |
| u8 disable_smooth_vision:1; |
| u8 single_dvi:1; |
| u8 rsvd9:1; |
| u8 fdi_rx_polarity_inverted:1; |
| u8 rsvd10:4; /* finish byte */ |
| |
| /* bits 4 */ |
| u8 legacy_monitor_detect; |
| |
| /* bits 5 */ |
| u8 int_crt_support:1; |
| u8 int_tv_support:1; |
| u8 int_efp_support:1; |
| u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */ |
| u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */ |
| u8 rsvd11:3; /* finish byte */ |
| } __packed; |
| |
| /* pre-915 */ |
| #define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ |
| #define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ |
| #define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ |
| #define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ |
| |
| /* Pre 915 */ |
| #define DEVICE_TYPE_NONE 0x00 |
| #define DEVICE_TYPE_CRT 0x01 |
| #define DEVICE_TYPE_TV 0x09 |
| #define DEVICE_TYPE_EFP 0x12 |
| #define DEVICE_TYPE_LFP 0x22 |
| /* On 915+ */ |
| #define DEVICE_TYPE_CRT_DPMS 0x6001 |
| #define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 |
| #define DEVICE_TYPE_TV_COMPOSITE 0x0209 |
| #define DEVICE_TYPE_TV_MACROVISION 0x0289 |
| #define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c |
| #define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 |
| #define DEVICE_TYPE_TV_SCART 0x0209 |
| #define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 |
| #define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 |
| #define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 |
| #define DEVICE_TYPE_EFP_DVI_I 0x6053 |
| #define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 |
| #define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 |
| #define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 |
| #define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 |
| #define DEVICE_TYPE_LFP_PANELLINK 0x5012 |
| #define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 |
| #define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 |
| #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 |
| #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 |
| |
| #define DEVICE_CFG_NONE 0x00 |
| #define DEVICE_CFG_12BIT_DVOB 0x01 |
| #define DEVICE_CFG_12BIT_DVOC 0x02 |
| #define DEVICE_CFG_24BIT_DVOBC 0x09 |
| #define DEVICE_CFG_24BIT_DVOCB 0x0a |
| #define DEVICE_CFG_DUAL_DVOB 0x11 |
| #define DEVICE_CFG_DUAL_DVOC 0x12 |
| #define DEVICE_CFG_DUAL_DVOBC 0x13 |
| #define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 |
| #define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a |
| |
| #define DEVICE_WIRE_NONE 0x00 |
| #define DEVICE_WIRE_DVOB 0x01 |
| #define DEVICE_WIRE_DVOC 0x02 |
| #define DEVICE_WIRE_DVOBC 0x03 |
| #define DEVICE_WIRE_DVOBB 0x05 |
| #define DEVICE_WIRE_DVOCC 0x06 |
| #define DEVICE_WIRE_DVOB_MASTER 0x0d |
| #define DEVICE_WIRE_DVOC_MASTER 0x0e |
| |
| #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ |
| #define DEVICE_PORT_DVOB 0x01 |
| #define DEVICE_PORT_DVOC 0x02 |
| |
| /* |
| * We used to keep this struct but without any version control. We should avoid |
| * using it in the future, but it should be safe to keep using it in the old |
| * code. Do not change; we rely on its size. |
| */ |
| struct old_child_dev_config { |
| u16 handle; |
| u16 device_type; |
| u8 device_id[10]; /* ascii string */ |
| u16 addin_offset; |
| u8 dvo_port; /* See Device_PORT_* above */ |
| u8 i2c_pin; |
| u8 slave_addr; |
| u8 ddc_pin; |
| u16 edid_ptr; |
| u8 dvo_cfg; /* See DEVICE_CFG_* above */ |
| u8 dvo2_port; |
| u8 i2c2_pin; |
| u8 slave2_addr; |
| u8 ddc2_pin; |
| u8 capabilities; |
| u8 dvo_wiring;/* See DEVICE_WIRE_* above */ |
| u8 dvo2_wiring; |
| u16 extended_type; |
| u8 dvo_function; |
| } __packed; |
| |
| /* This one contains field offsets that are known to be common for all BDB |
| * versions. Notice that the meaning of the contents contents may still change, |
| * but at least the offsets are consistent. */ |
| |
| struct common_child_dev_config { |
| u16 handle; |
| u16 device_type; |
| u8 not_common1[12]; |
| u8 dvo_port; |
| u8 not_common2[2]; |
| u8 ddc_pin; |
| u16 edid_ptr; |
| u8 dvo_cfg; /* See DEVICE_CFG_* above */ |
| u8 efp_routed:1; |
| u8 lane_reversal:1; |
| u8 lspcon:1; |
| u8 iboost:1; |
| u8 hpd_invert:1; |
| u8 flag_reserved:3; |
| u8 hdmi_support:1; |
| u8 dp_support:1; |
| u8 tmds_support:1; |
| u8 support_reserved:5; |
| u8 not_common3[12]; |
| u8 iboost_level; |
| } __packed; |
| |
| |
| /* This field changes depending on the BDB version, so the most reliable way to |
| * read it is by checking the BDB version and reading the raw pointer. */ |
| union child_device_config { |
| /* This one is safe to be used anywhere, but the code should still check |
| * the BDB version. */ |
| u8 raw[33]; |
| /* This one should only be kept for legacy code. */ |
| struct old_child_dev_config old; |
| /* This one should also be safe to use anywhere, even without version |
| * checks. */ |
| struct common_child_dev_config common; |
| } __packed; |
| |
| struct bdb_general_definitions { |
| /* DDC GPIO */ |
| u8 crt_ddc_gmbus_pin; |
| |
| /* DPMS bits */ |
| u8 dpms_acpi:1; |
| u8 skip_boot_crt_detect:1; |
| u8 dpms_aim:1; |
| u8 rsvd1:5; /* finish byte */ |
| |
| /* boot device bits */ |
| u8 boot_display[2]; |
| u8 child_dev_size; |
| |
| /* |
| * Device info: |
| * If TV is present, it'll be at devices[0]. |
| * LVDS will be next, either devices[0] or [1], if present. |
| * On some platforms the number of device is 6. But could be as few as |
| * 4 if both TV and LVDS are missing. |
| * And the device num is related with the size of general definition |
| * block. It is obtained by using the following formula: |
| * number = (block_size - sizeof(bdb_general_definitions))/ |
| * defs->child_dev_size; |
| */ |
| uint8_t devices[0]; |
| } __packed; |
| |
| /* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */ |
| #define MODE_MASK 0x3 |
| |
| struct bdb_lvds_options { |
| u8 panel_type; |
| u8 rsvd1; |
| /* LVDS capabilities, stored in a dword */ |
| u8 pfit_mode:2; |
| u8 pfit_text_mode_enhanced:1; |
| u8 pfit_gfx_mode_enhanced:1; |
| u8 pfit_ratio_auto:1; |
| u8 pixel_dither:1; |
| u8 lvds_edid:1; |
| u8 rsvd2:1; |
| u8 rsvd4; |
| /* LVDS Panel channel bits stored here */ |
| u32 lvds_panel_channel_bits; |
| /* LVDS SSC (Spread Spectrum Clock) bits stored here. */ |
| u16 ssc_bits; |
| u16 ssc_freq; |
| u16 ssc_ddt; |
| /* Panel color depth defined here */ |
| u16 panel_color_depth; |
| /* LVDS panel type bits stored here */ |
| u32 dps_panel_type_bits; |
| /* LVDS backlight control type bits stored here */ |
| u32 blt_control_type_bits; |
| } __packed; |
| |
| /* LFP pointer table contains entries to the struct below */ |
| struct bdb_lvds_lfp_data_ptr { |
| u16 fp_timing_offset; /* offsets are from start of bdb */ |
| u8 fp_table_size; |
| u16 dvo_timing_offset; |
| u8 dvo_table_size; |
| u16 panel_pnp_id_offset; |
| u8 pnp_table_size; |
| } __packed; |
| |
| struct bdb_lvds_lfp_data_ptrs { |
| u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ |
| struct bdb_lvds_lfp_data_ptr ptr[16]; |
| } __packed; |
| |
| /* LFP data has 3 blocks per entry */ |
| struct lvds_fp_timing { |
| u16 x_res; |
| u16 y_res; |
| u32 lvds_reg; |
| u32 lvds_reg_val; |
| u32 pp_on_reg; |
| u32 pp_on_reg_val; |
| u32 pp_off_reg; |
| u32 pp_off_reg_val; |
| u32 pp_cycle_reg; |
| u32 pp_cycle_reg_val; |
| u32 pfit_reg; |
| u32 pfit_reg_val; |
| u16 terminator; |
| } __packed; |
| |
| struct lvds_dvo_timing { |
| u16 clock; /**< In 10khz */ |
| u8 hactive_lo; |
| u8 hblank_lo; |
| u8 hblank_hi:4; |
| u8 hactive_hi:4; |
| u8 vactive_lo; |
| u8 vblank_lo; |
| u8 vblank_hi:4; |
| u8 vactive_hi:4; |
| u8 hsync_off_lo; |
| u8 hsync_pulse_width; |
| u8 vsync_pulse_width:4; |
| u8 vsync_off:4; |
| u8 rsvd0:6; |
| u8 hsync_off_hi:2; |
| u8 himage_lo; |
| u8 vimage_lo; |
| u8 vimage_hi:4; |
| u8 himage_hi:4; |
| u8 h_border; |
| u8 v_border; |
| u8 rsvd1:3; |
| u8 digital:2; |
| u8 vsync_positive:1; |
| u8 hsync_positive:1; |
| u8 rsvd2:1; |
| } __packed; |
| |
| struct lvds_pnp_id { |
| u16 mfg_name; |
| u16 product_code; |
| u32 serial; |
| u8 mfg_week; |
| u8 mfg_year; |
| } __packed; |
| |
| struct bdb_lvds_lfp_data_entry { |
| struct lvds_fp_timing fp_timing; |
| struct lvds_dvo_timing dvo_timing; |
| struct lvds_pnp_id pnp_id; |
| } __packed; |
| |
| struct bdb_lvds_lfp_data { |
| struct bdb_lvds_lfp_data_entry data[16]; |
| } __packed; |
| |
| #define BDB_BACKLIGHT_TYPE_NONE 0 |
| #define BDB_BACKLIGHT_TYPE_PWM 2 |
| |
| struct bdb_lfp_backlight_data_entry { |
| u8 type:2; |
| u8 active_low_pwm:1; |
| u8 obsolete1:5; |
| u16 pwm_freq_hz; |
| u8 min_brightness; |
| u8 obsolete2; |
| u8 obsolete3; |
| } __packed; |
| |
| struct bdb_lfp_backlight_control_method { |
| u8 type:4; |
| u8 controller:4; |
| } __packed; |
| |
| struct bdb_lfp_backlight_data { |
| u8 entry_size; |
| struct bdb_lfp_backlight_data_entry data[16]; |
| u8 level[16]; |
| struct bdb_lfp_backlight_control_method backlight_control[16]; |
| } __packed; |
| |
| struct aimdb_header { |
| char signature[16]; |
| char oem_device[20]; |
| u16 aimdb_version; |
| u16 aimdb_header_size; |
| u16 aimdb_size; |
| } __packed; |
| |
| struct aimdb_block { |
| u8 aimdb_id; |
| u16 aimdb_size; |
| } __packed; |
| |
| struct vch_panel_data { |
| u16 fp_timing_offset; |
| u8 fp_timing_size; |
| u16 dvo_timing_offset; |
| u8 dvo_timing_size; |
| u16 text_fitting_offset; |
| u8 text_fitting_size; |
| u16 graphics_fitting_offset; |
| u8 graphics_fitting_size; |
| } __packed; |
| |
| struct vch_bdb_22 { |
| struct aimdb_block aimdb_block; |
| struct vch_panel_data panels[16]; |
| } __packed; |
| |
| struct bdb_sdvo_lvds_options { |
| u8 panel_backlight; |
| u8 h40_set_panel_type; |
| u8 panel_type; |
| u8 ssc_clk_freq; |
| u16 als_low_trip; |
| u16 als_high_trip; |
| u8 sclalarcoeff_tab_row_num; |
| u8 sclalarcoeff_tab_row_size; |
| u8 coefficient[8]; |
| u8 panel_misc_bits_1; |
| u8 panel_misc_bits_2; |
| u8 panel_misc_bits_3; |
| u8 panel_misc_bits_4; |
| } __packed; |
| |
| |
| #define BDB_DRIVER_FEATURE_NO_LVDS 0 |
| #define BDB_DRIVER_FEATURE_INT_LVDS 1 |
| #define BDB_DRIVER_FEATURE_SDVO_LVDS 2 |
| #define BDB_DRIVER_FEATURE_EDP 3 |
| |
| struct bdb_driver_features { |
| u8 boot_dev_algorithm:1; |
| u8 block_display_switch:1; |
| u8 allow_display_switch:1; |
| u8 hotplug_dvo:1; |
| u8 dual_view_zoom:1; |
| u8 int15h_hook:1; |
| u8 sprite_in_clone:1; |
| u8 primary_lfp_id:1; |
| |
| u16 boot_mode_x; |
| u16 boot_mode_y; |
| u8 boot_mode_bpp; |
| u8 boot_mode_refresh; |
| |
| u16 enable_lfp_primary:1; |
| u16 selective_mode_pruning:1; |
| u16 dual_frequency:1; |
| u16 render_clock_freq:1; /* 0: high freq; 1: low freq */ |
| u16 nt_clone_support:1; |
| u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */ |
| u16 sprite_display_assign:1; /* 0: secondary; 1: primary */ |
| u16 cui_aspect_scaling:1; |
| u16 preserve_aspect_ratio:1; |
| u16 sdvo_device_power_down:1; |
| u16 crt_hotplug:1; |
| u16 lvds_config:2; |
| u16 tv_hotplug:1; |
| u16 hdmi_config:2; |
| |
| u8 static_display:1; |
| u8 reserved2:7; |
| u16 legacy_crt_max_x; |
| u16 legacy_crt_max_y; |
| u8 legacy_crt_max_refresh; |
| |
| u8 hdmi_termination; |
| u8 custom_vbt_version; |
| /* Driver features data block */ |
| u16 rmpm_enabled:1; |
| u16 s2ddt_enabled:1; |
| u16 dpst_enabled:1; |
| u16 bltclt_enabled:1; |
| u16 adb_enabled:1; |
| u16 drrs_enabled:1; |
| u16 grs_enabled:1; |
| u16 gpmt_enabled:1; |
| u16 tbt_enabled:1; |
| u16 psr_enabled:1; |
| u16 ips_enabled:1; |
| u16 reserved3:4; |
| u16 pc_feature_valid:1; |
| } __packed; |
| |
| #define EDP_18BPP 0 |
| #define EDP_24BPP 1 |
| #define EDP_30BPP 2 |
| #define EDP_RATE_1_62 0 |
| #define EDP_RATE_2_7 1 |
| #define EDP_LANE_1 0 |
| #define EDP_LANE_2 1 |
| #define EDP_LANE_4 3 |
| #define EDP_PREEMPHASIS_NONE 0 |
| #define EDP_PREEMPHASIS_3_5dB 1 |
| #define EDP_PREEMPHASIS_6dB 2 |
| #define EDP_PREEMPHASIS_9_5dB 3 |
| #define EDP_VSWING_0_4V 0 |
| #define EDP_VSWING_0_6V 1 |
| #define EDP_VSWING_0_8V 2 |
| #define EDP_VSWING_1_2V 3 |
| |
| |
| struct edp_link_params { |
| u8 rate:4; |
| u8 lanes:4; |
| u8 preemphasis:4; |
| u8 vswing:4; |
| } __packed; |
| |
| struct bdb_edp { |
| struct edp_power_seq power_seqs[16]; |
| u32 color_depth; |
| struct edp_link_params link_params[16]; |
| u32 sdrrs_msa_timing_delay; |
| |
| /* ith bit indicates enabled/disabled for (i+1)th panel */ |
| u16 edp_s3d_feature; |
| u16 edp_t3_optimization; |
| u64 edp_vswing_preemph; /* v173 */ |
| } __packed; |
| |
| struct psr_table { |
| /* Feature bits */ |
| u8 full_link:1; |
| u8 require_aux_to_wakeup:1; |
| u8 feature_bits_rsvd:6; |
| |
| /* Wait times */ |
| u8 idle_frames:4; |
| u8 lines_to_wait:3; |
| u8 wait_times_rsvd:1; |
| |
| /* TP wake up time in multiple of 100 */ |
| u16 tp1_wakeup_time; |
| u16 tp2_tp3_wakeup_time; |
| } __packed; |
| |
| struct bdb_psr { |
| struct psr_table psr_table[16]; |
| } __packed; |
| |
| /* |
| * Driver<->VBIOS interaction occurs through scratch bits in |
| * GR18 & SWF*. |
| */ |
| |
| /* GR18 bits are set on display switch and hotkey events */ |
| #define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ |
| #define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ |
| #define GR18_HK_NONE (0x0<<3) |
| #define GR18_HK_LFP_STRETCH (0x1<<3) |
| #define GR18_HK_TOGGLE_DISP (0x2<<3) |
| #define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ |
| #define GR18_HK_POPUP_DISABLED (0x6<<3) |
| #define GR18_HK_POPUP_ENABLED (0x7<<3) |
| #define GR18_HK_PFIT (0x8<<3) |
| #define GR18_HK_APM_CHANGE (0xa<<3) |
| #define GR18_HK_MULTIPLE (0xc<<3) |
| #define GR18_USER_INT_EN (1<<2) |
| #define GR18_A0000_FLUSH_EN (1<<1) |
| #define GR18_SMM_EN (1<<0) |
| |
| /* Set by driver, cleared by VBIOS */ |
| #define SWF00_YRES_SHIFT 16 |
| #define SWF00_XRES_SHIFT 0 |
| #define SWF00_RES_MASK 0xffff |
| |
| /* Set by VBIOS at boot time and driver at runtime */ |
| #define SWF01_TV2_FORMAT_SHIFT 8 |
| #define SWF01_TV1_FORMAT_SHIFT 0 |
| #define SWF01_TV_FORMAT_MASK 0xffff |
| |
| #define SWF10_VBIOS_BLC_I2C_EN (1<<29) |
| #define SWF10_GTT_OVERRIDE_EN (1<<28) |
| #define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ |
| #define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) |
| #define SWF10_OLD_TOGGLE 0x0 |
| #define SWF10_TOGGLE_LIST_1 0x1 |
| #define SWF10_TOGGLE_LIST_2 0x2 |
| #define SWF10_TOGGLE_LIST_3 0x3 |
| #define SWF10_TOGGLE_LIST_4 0x4 |
| #define SWF10_PANNING_EN (1<<23) |
| #define SWF10_DRIVER_LOADED (1<<22) |
| #define SWF10_EXTENDED_DESKTOP (1<<21) |
| #define SWF10_EXCLUSIVE_MODE (1<<20) |
| #define SWF10_OVERLAY_EN (1<<19) |
| #define SWF10_PLANEB_HOLDOFF (1<<18) |
| #define SWF10_PLANEA_HOLDOFF (1<<17) |
| #define SWF10_VGA_HOLDOFF (1<<16) |
| #define SWF10_ACTIVE_DISP_MASK 0xffff |
| #define SWF10_PIPEB_LFP2 (1<<15) |
| #define SWF10_PIPEB_EFP2 (1<<14) |
| #define SWF10_PIPEB_TV2 (1<<13) |
| #define SWF10_PIPEB_CRT2 (1<<12) |
| #define SWF10_PIPEB_LFP (1<<11) |
| #define SWF10_PIPEB_EFP (1<<10) |
| #define SWF10_PIPEB_TV (1<<9) |
| #define SWF10_PIPEB_CRT (1<<8) |
| #define SWF10_PIPEA_LFP2 (1<<7) |
| #define SWF10_PIPEA_EFP2 (1<<6) |
| #define SWF10_PIPEA_TV2 (1<<5) |
| #define SWF10_PIPEA_CRT2 (1<<4) |
| #define SWF10_PIPEA_LFP (1<<3) |
| #define SWF10_PIPEA_EFP (1<<2) |
| #define SWF10_PIPEA_TV (1<<1) |
| #define SWF10_PIPEA_CRT (1<<0) |
| |
| #define SWF11_MEMORY_SIZE_SHIFT 16 |
| #define SWF11_SV_TEST_EN (1<<15) |
| #define SWF11_IS_AGP (1<<14) |
| #define SWF11_DISPLAY_HOLDOFF (1<<13) |
| #define SWF11_DPMS_REDUCED (1<<12) |
| #define SWF11_IS_VBE_MODE (1<<11) |
| #define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ |
| #define SWF11_DPMS_MASK 0x07 |
| #define SWF11_DPMS_OFF (1<<2) |
| #define SWF11_DPMS_SUSPEND (1<<1) |
| #define SWF11_DPMS_STANDBY (1<<0) |
| #define SWF11_DPMS_ON 0 |
| |
| #define SWF14_GFX_PFIT_EN (1<<31) |
| #define SWF14_TEXT_PFIT_EN (1<<30) |
| #define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ |
| #define SWF14_POPUP_EN (1<<28) |
| #define SWF14_DISPLAY_HOLDOFF (1<<27) |
| #define SWF14_DISP_DETECT_EN (1<<26) |
| #define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ |
| #define SWF14_DRIVER_STATUS (1<<24) |
| #define SWF14_OS_TYPE_WIN9X (1<<23) |
| #define SWF14_OS_TYPE_WINNT (1<<22) |
| /* 21:19 rsvd */ |
| #define SWF14_PM_TYPE_MASK 0x00070000 |
| #define SWF14_PM_ACPI_VIDEO (0x4 << 16) |
| #define SWF14_PM_ACPI (0x3 << 16) |
| #define SWF14_PM_APM_12 (0x2 << 16) |
| #define SWF14_PM_APM_11 (0x1 << 16) |
| #define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ |
| /* if GR18 indicates a display switch */ |
| #define SWF14_DS_PIPEB_LFP2_EN (1<<15) |
| #define SWF14_DS_PIPEB_EFP2_EN (1<<14) |
| #define SWF14_DS_PIPEB_TV2_EN (1<<13) |
| #define SWF14_DS_PIPEB_CRT2_EN (1<<12) |
| #define SWF14_DS_PIPEB_LFP_EN (1<<11) |
| #define SWF14_DS_PIPEB_EFP_EN (1<<10) |
| #define SWF14_DS_PIPEB_TV_EN (1<<9) |
| #define SWF14_DS_PIPEB_CRT_EN (1<<8) |
| #define SWF14_DS_PIPEA_LFP2_EN (1<<7) |
| #define SWF14_DS_PIPEA_EFP2_EN (1<<6) |
| #define SWF14_DS_PIPEA_TV2_EN (1<<5) |
| #define SWF14_DS_PIPEA_CRT2_EN (1<<4) |
| #define SWF14_DS_PIPEA_LFP_EN (1<<3) |
| #define SWF14_DS_PIPEA_EFP_EN (1<<2) |
| #define SWF14_DS_PIPEA_TV_EN (1<<1) |
| #define SWF14_DS_PIPEA_CRT_EN (1<<0) |
| /* if GR18 indicates a panel fitting request */ |
| #define SWF14_PFIT_EN (1<<0) /* 0 means disable */ |
| /* if GR18 indicates an APM change request */ |
| #define SWF14_APM_HIBERNATE 0x4 |
| #define SWF14_APM_SUSPEND 0x3 |
| #define SWF14_APM_STANDBY 0x1 |
| #define SWF14_APM_RESTORE 0x0 |
| |
| /* Add the device class for LFP, TV, HDMI */ |
| #define DEVICE_TYPE_INT_LFP 0x1022 |
| #define DEVICE_TYPE_INT_TV 0x1009 |
| #define DEVICE_TYPE_HDMI 0x60D2 |
| #define DEVICE_TYPE_DP 0x68C6 |
| #define DEVICE_TYPE_DP_DUAL_MODE 0x60D6 |
| #define DEVICE_TYPE_eDP 0x78C6 |
| |
| #define DEVICE_TYPE_CLASS_EXTENSION (1 << 15) |
| #define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14) |
| #define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13) |
| #define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12) |
| #define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11) |
| #define DEVICE_TYPE_MIPI_OUTPUT (1 << 10) |
| #define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9) |
| #define DEVICE_TYPE_DUAL_CHANNEL (1 << 8) |
| #define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6) |
| #define DEVICE_TYPE_LVDS_SINGALING (1 << 5) |
| #define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4) |
| #define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3) |
| #define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2) |
| #define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1) |
| #define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0) |
| |
| /* |
| * Bits we care about when checking for DEVICE_TYPE_eDP |
| * Depending on the system, the other bits may or may not |
| * be set for eDP outputs. |
| */ |
| #define DEVICE_TYPE_eDP_BITS \ |
| (DEVICE_TYPE_INTERNAL_CONNECTOR | \ |
| DEVICE_TYPE_MIPI_OUTPUT | \ |
| DEVICE_TYPE_COMPOSITE_OUTPUT | \ |
| DEVICE_TYPE_DUAL_CHANNEL | \ |
| DEVICE_TYPE_LVDS_SINGALING | \ |
| DEVICE_TYPE_TMDS_DVI_SIGNALING | \ |
| DEVICE_TYPE_VIDEO_SIGNALING | \ |
| DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ |
| DEVICE_TYPE_ANALOG_OUTPUT) |
| |
| #define DEVICE_TYPE_DP_DUAL_MODE_BITS \ |
| (DEVICE_TYPE_INTERNAL_CONNECTOR | \ |
| DEVICE_TYPE_MIPI_OUTPUT | \ |
| DEVICE_TYPE_COMPOSITE_OUTPUT | \ |
| DEVICE_TYPE_LVDS_SINGALING | \ |
| DEVICE_TYPE_TMDS_DVI_SIGNALING | \ |
| DEVICE_TYPE_VIDEO_SIGNALING | \ |
| DEVICE_TYPE_DISPLAYPORT_OUTPUT | \ |
| DEVICE_TYPE_DIGITAL_OUTPUT | \ |
| DEVICE_TYPE_ANALOG_OUTPUT) |
| |
| /* define the DVO port for HDMI output type */ |
| #define DVO_B 1 |
| #define DVO_C 2 |
| #define DVO_D 3 |
| |
| /* Possible values for the "DVO Port" field for versions >= 155: */ |
| #define DVO_PORT_HDMIA 0 |
| #define DVO_PORT_HDMIB 1 |
| #define DVO_PORT_HDMIC 2 |
| #define DVO_PORT_HDMID 3 |
| #define DVO_PORT_LVDS 4 |
| #define DVO_PORT_TV 5 |
| #define DVO_PORT_CRT 6 |
| #define DVO_PORT_DPB 7 |
| #define DVO_PORT_DPC 8 |
| #define DVO_PORT_DPD 9 |
| #define DVO_PORT_DPA 10 |
| #define DVO_PORT_DPE 11 |
| #define DVO_PORT_HDMIE 12 |
| #define DVO_PORT_MIPIA 21 |
| #define DVO_PORT_MIPIB 22 |
| #define DVO_PORT_MIPIC 23 |
| #define DVO_PORT_MIPID 24 |
| |
| /* Block 52 contains MIPI configuration block |
| * 6 * bdb_mipi_config, followed by 6 pps data block |
| * block below |
| */ |
| #define MAX_MIPI_CONFIGURATIONS 6 |
| |
| struct bdb_mipi_config { |
| struct mipi_config config[MAX_MIPI_CONFIGURATIONS]; |
| struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS]; |
| } __packed; |
| |
| /* Block 53 contains MIPI sequences as needed by the panel |
| * for enabling it. This block can be variable in size and |
| * can be maximum of 6 blocks |
| */ |
| struct bdb_mipi_sequence { |
| u8 version; |
| u8 data[0]; |
| } __packed; |
| |
| enum mipi_gpio_pin_index { |
| MIPI_GPIO_UNDEFINED = 0, |
| MIPI_GPIO_PANEL_ENABLE, |
| MIPI_GPIO_BL_ENABLE, |
| MIPI_GPIO_PWM_ENABLE, |
| MIPI_GPIO_RESET_N, |
| MIPI_GPIO_PWR_DOWN_R, |
| MIPI_GPIO_STDBY_RST_N, |
| MIPI_GPIO_MAX |
| }; |
| |
| #endif /* _INTEL_VBT_DEFS_H_ */ |