[ACPI] ACPICA 20051216
Implemented optional support to allow unresolved names
within ASL Package objects. A null object is inserted in
the package when a named reference cannot be located in
the current namespace. Enabled via the interpreter slack
flag which Linux has enabled by default (acpi=strict
to disable slack). This should eliminate AE_NOT_FOUND
exceptions seen on machines that contain such code.
Implemented an optimization to the initialization
sequence that can improve boot time. During ACPI device
initialization, the _STA method is now run if and only
if the _INI method exists. The _STA method is used to
determine if the device is present; An _INI can only be
run if _STA returns present, but it is a waste of time to
run the _STA method if the _INI does not exist. (Prototype
and assistance from Dong Wei)
Implemented use of the C99 uintptr_t for the pointer
casting macros if it is available in the current
compiler. Otherwise, the default (void *) cast is used
as before.
Fixed some possible memory leaks found within the
execution path of the Break, Continue, If, and CreateField
operators. (Valery Podrezov)
Fixed a problem introduced in the 20051202 release where
an exception is generated during method execution if a
control method attempts to declare another method.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index f48b9ee..1f2477e 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -63,7 +63,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20051202
+#define ACPI_CA_VERSION 0x20051216
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h
index 99250ee..0a8f49f 100644
--- a/include/acpi/acdisasm.h
+++ b/include/acpi/acdisasm.h
@@ -57,27 +57,11 @@
};
extern struct acpi_external_list *acpi_gbl_external_list;
-extern const char *acpi_gbl_io_decode[2];
-extern const char *acpi_gbl_word_decode[4];
-extern const char *acpi_gbl_consume_decode[2];
-extern const char *acpi_gbl_config_decode[4];
-extern const char *acpi_gbl_min_decode[2];
-extern const char *acpi_gbl_max_decode[2];
-extern const char *acpi_gbl_DECdecode[2];
-extern const char *acpi_gbl_RNGdecode[4];
-extern const char *acpi_gbl_MEMdecode[4];
-extern const char *acpi_gbl_RWdecode[2];
-extern const char *acpi_gbl_irq_decode[2];
-extern const char *acpi_gbl_HEdecode[2];
-extern const char *acpi_gbl_LLdecode[2];
-extern const char *acpi_gbl_SHRdecode[2];
-extern const char *acpi_gbl_TYPdecode[4];
-extern const char *acpi_gbl_BMdecode[2];
-extern const char *acpi_gbl_SIZdecode[4];
-extern const char *acpi_gbl_TTPdecode[2];
-extern const char *acpi_gbl_MTPdecode[4];
-extern const char *acpi_gbl_TRSdecode[2];
+/* Strings used for decoding flags to ASL keywords */
+
+extern const char *acpi_gbl_word_decode[4];
+extern const char *acpi_gbl_irq_decode[2];
extern const char *acpi_gbl_lock_rule[ACPI_NUM_LOCK_RULES];
extern const char *acpi_gbl_access_types[ACPI_NUM_ACCESS_TYPES];
extern const char *acpi_gbl_update_rules[ACPI_NUM_UPDATE_RULES];
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
index 065f24a..cc6407e 100644
--- a/include/acpi/acdispat.h
+++ b/include/acpi/acdispat.h
@@ -201,6 +201,9 @@
union acpi_operand_object *obj_desc,
struct acpi_namespace_node *calling_method_node);
+acpi_status
+acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state);
+
/*
* dsinit
*/
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 3f37560..dfb3b24 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -98,11 +98,15 @@
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
* interpreter strictly follows the ACPI specification. Setting to TRUE
- * allows the interpreter to forgive certain bad AML constructs. Currently:
+ * allows the interpreter to ignore certain errors and/or bad AML constructs.
+ *
+ * Currently, these features are enabled by this flag:
+ *
* 1) Allow "implicit return" of last value in a control method
- * 2) Allow access beyond end of operation region
+ * 2) Allow access beyond the end of an operation region
* 3) Allow access to uninitialized locals/args (auto-init to integer 0)
* 4) Allow ANY object type to be a source operand for the Store() operator
+ * 5) Allow unresolved references (invalid target name) in package objects
*/
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE);
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index 0cb61a7..da7f1cb 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -276,6 +276,37 @@
u8 field_type;
};
+/*
+ * Bitmapped ACPI types. Used internally only
+ */
+#define ACPI_BTYPE_ANY 0x00000000
+#define ACPI_BTYPE_INTEGER 0x00000001
+#define ACPI_BTYPE_STRING 0x00000002
+#define ACPI_BTYPE_BUFFER 0x00000004
+#define ACPI_BTYPE_PACKAGE 0x00000008
+#define ACPI_BTYPE_FIELD_UNIT 0x00000010
+#define ACPI_BTYPE_DEVICE 0x00000020
+#define ACPI_BTYPE_EVENT 0x00000040
+#define ACPI_BTYPE_METHOD 0x00000080
+#define ACPI_BTYPE_MUTEX 0x00000100
+#define ACPI_BTYPE_REGION 0x00000200
+#define ACPI_BTYPE_POWER 0x00000400
+#define ACPI_BTYPE_PROCESSOR 0x00000800
+#define ACPI_BTYPE_THERMAL 0x00001000
+#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
+#define ACPI_BTYPE_DDB_HANDLE 0x00004000
+#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
+#define ACPI_BTYPE_REFERENCE 0x00010000
+#define ACPI_BTYPE_RESOURCE 0x00020000
+
+#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
+
+#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
+#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
+#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
+#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
+#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
+
/*****************************************************************************
*
* Event typedefs and structs
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h
index 65a1a5c..0fa8f72db 100644
--- a/include/acpi/acmacros.h
+++ b/include/acpi/acmacros.h
@@ -60,7 +60,7 @@
/*
* For 16-bit addresses, we have to assume that the upper 32 bits
- * are zero.
+ * (out of 64) are zero.
*/
#define ACPI_LODWORD(l) ((u32)(l))
#define ACPI_HIDWORD(l) ((u32)(0))
@@ -104,8 +104,9 @@
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i)
/*
- * Extract a byte of data using a pointer. Any more than a byte and we
- * get into potential aligment issues -- see the STORE macros below
+ * Extract data using a pointer. Any more than a byte and we
+ * get into potential aligment issues -- see the STORE macros below.
+ * Use with care.
*/
#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr)
#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr)
@@ -116,16 +117,17 @@
#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr)
#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr)
-/* Pointer manipulation */
-
-#define ACPI_CAST_PTR(t, p) ((t *)(void *)(p))
-#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p))
-#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_native_uint)(b)))
-#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b))
+/*
+ * Pointer manipulation
+ */
+#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
+#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
+#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
+#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
/* Pointer/Integer type conversions */
-#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_native_uint)i)
+#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
#define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f)
@@ -133,7 +135,7 @@
#if ACPI_MACHINE_WIDTH == 16
#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s)
#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i)
-#define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i)
+#define ACPI_PTR_TO_PHYSADDR(i) (u32) ACPI_CAST_PTR (u8,(i))
#else
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index a46f406..ef2ddca 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -45,6 +45,12 @@
#define __ACTBL_H__
/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*
* Values for description table header signatures
*/
#define RSDP_NAME "RSDP"
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 1184759..18e1338 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -44,7 +44,15 @@
#ifndef __ACTYPES_H__
#define __ACTYPES_H__
-/*! [Begin] no source code translation (keep the typedefs) */
+/*
+ * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
+ * and must be either 16, 32, or 64
+ */
+#ifndef ACPI_MACHINE_WIDTH
+#error ACPI_MACHINE_WIDTH not defined
+#endif
+
+/*! [Begin] no source code translation */
/*
* Data type ranges
@@ -58,154 +66,210 @@
#define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */
#define ACPI_ASCII_MAX 0x7F
-#ifdef DEFINE_ALTERNATE_TYPES
/*
- * Types used only in translated source, defined here to enable
- * cross-platform compilation only.
- */
-typedef int s32;
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-typedef COMPILER_DEPENDENT_UINT64 u64;
-
-#endif
-
-/*
- * Data types - Fixed across all compilation models (16/32/64)
+ * Architecture-specific ACPICA Subsystem Data Types
*
- * BOOLEAN Logical Boolean.
- * INT8 8-bit (1 byte) signed value
- * UINT8 8-bit (1 byte) unsigned value
- * INT16 16-bit (2 byte) signed value
- * UINT16 16-bit (2 byte) unsigned value
- * INT32 32-bit (4 byte) signed value
- * UINT32 32-bit (4 byte) unsigned value
- * INT64 64-bit (8 byte) signed value
- * UINT64 64-bit (8 byte) unsigned value
- * ACPI_NATIVE_UINT 32-bit on IA-32, 64-bit on x86_64/IA-64 unsigned value
+ * The goal of these types is to provide source code portability across
+ * 16-bit, 32-bit, and 64-bit targets.
+ *
+ * 1) The following types are of fixed size for all targets (16/32/64):
+ *
+ * BOOLEAN Logical boolean
+ *
+ * UINT8 8-bit (1 byte) unsigned value
+ * UINT16 16-bit (2 byte) unsigned value
+ * UINT32 32-bit (4 byte) unsigned value
+ * UINT64 64-bit (8 byte) unsigned value
+ *
+ * INT16 16-bit (2 byte) signed value
+ * INT32 32-bit (4 byte) signed value
+ * INT64 64-bit (8 byte) signed value
+ *
+ * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the
+ * compiler-dependent header(s) and were introduced because there is no common
+ * 64-bit integer type across the various compilation models, as shown in
+ * the table below.
+ *
+ * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit
+ * char 8 8 8 8 8 8
+ * short 16 16 16 16 16 16
+ * _int32 32
+ * int 32 64 32 32 16 16
+ * long 64 64 32 32 32 32
+ * long long 64 64
+ * pointer 64 64 64 32 32 32
+ *
+ * Note: ILP64 and LP32 are currently not supported.
+ *
+ *
+ * 2) These types represent the native word size of the target mode of the
+ * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
+ * usually used for memory allocation, efficient loop counters, and array
+ * indexes. The types are similar to the size_t type in the C library and are
+ * required because there is no C type that consistently represents the native
+ * data width.
+ *
+ * ACPI_SIZE 16/32/64-bit unsigned value
+ * ACPI_NATIVE_UINT 16/32/64-bit unsigned value
+ * ACPI_NATIVE_INT 16/32/64-bit signed value
+ *
*/
-typedef unsigned long acpi_native_uint;
+/*******************************************************************************
+ *
+ * Common types for all compilers, all targets
+ *
+ ******************************************************************************/
-#ifndef ACPI_MACHINE_WIDTH
-#error ACPI_MACHINE_WIDTH not defined
-#endif
+typedef unsigned char BOOLEAN;
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef COMPILER_DEPENDENT_UINT64 UINT64;
+typedef COMPILER_DEPENDENT_INT64 INT64;
+
+/*! [End] no source code translation !*/
+
+/*******************************************************************************
+ *
+ * Types specific to 64-bit targets
+ *
+ ******************************************************************************/
#if ACPI_MACHINE_WIDTH == 64
-/*! [Begin] no source code translation (keep the typedefs) */
+/*! [Begin] no source code translation (keep the typedefs as-is) */
-/*
- * 64-bit type definitions
- */
-typedef unsigned char UINT8;
-typedef unsigned char BOOLEAN;
-typedef unsigned short UINT16;
-typedef int INT32;
typedef unsigned int UINT32;
-typedef COMPILER_DEPENDENT_INT64 INT64;
-typedef COMPILER_DEPENDENT_UINT64 UINT64;
+typedef int INT32;
/*! [End] no source code translation !*/
+typedef u64 acpi_native_uint;
+typedef s64 acpi_native_int;
+
typedef u64 acpi_table_ptr;
typedef u64 acpi_io_address;
typedef u64 acpi_physical_address;
-typedef u64 acpi_size;
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000008 /* No hardware alignment support in IA64 */
-#define ACPI_USE_NATIVE_DIVIDE /* Native 64-bit integer support */
#define ACPI_MAX_PTR ACPI_UINT64_MAX
#define ACPI_SIZE_MAX ACPI_UINT64_MAX
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000008
+#define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */
+
/*
* In the case of the Itanium Processor Family (IPF), the hardware does not
* support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
* to indicate that special precautions must be taken to avoid alignment faults.
* (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
*
- * Note: Em64_t and other X86-64 processors do support misaligned transfers,
+ * Note: Em64_t and other X86-64 processors support misaligned transfers,
* so there is no need to define this flag.
*/
#if defined (__IA64__) || defined (__ia64__)
#define ACPI_MISALIGNMENT_NOT_SUPPORTED
#endif
-#elif ACPI_MACHINE_WIDTH == 16
-
-/*! [Begin] no source code translation (keep the typedefs as-is) */
-
-/*
- * 16-bit type definitions
- */
-typedef unsigned char UINT8;
-typedef unsigned char BOOLEAN;
-typedef unsigned int UINT16;
-typedef long INT32;
-typedef int INT16;
-typedef unsigned long UINT32;
-
-struct {
- UINT32 Lo;
- UINT32 Hi;
-};
-
-/*! [End] no source code translation !*/
-
-typedef u32 acpi_table_ptr;
-typedef u32 acpi_io_address;
-typedef char *acpi_physical_address;
-typedef u16 acpi_size;
-
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000002
-#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
-#define ACPI_MAX_PTR ACPI_UINT16_MAX
-#define ACPI_SIZE_MAX ACPI_UINT16_MAX
-
-/*
- * (16-bit only) internal integers must be 32-bits, so
- * 64-bit integers cannot be supported
- */
-#define ACPI_NO_INTEGER64_SUPPORT
+/*******************************************************************************
+ *
+ * Types specific to 32-bit targets
+ *
+ ******************************************************************************/
#elif ACPI_MACHINE_WIDTH == 32
-/*! [Begin] no source code translation (keep the typedefs) */
+/*! [Begin] no source code translation (keep the typedefs as-is) */
-/*
- * 32-bit type definitions (default)
- */
-typedef unsigned char UINT8;
-typedef unsigned char BOOLEAN;
-typedef unsigned short UINT16;
-typedef int INT32;
typedef unsigned int UINT32;
-typedef COMPILER_DEPENDENT_INT64 INT64;
-typedef COMPILER_DEPENDENT_UINT64 UINT64;
+typedef int INT32;
/*! [End] no source code translation !*/
+typedef u32 acpi_native_uint;
+typedef s32 acpi_native_int;
+
typedef u64 acpi_table_ptr;
typedef u32 acpi_io_address;
typedef u64 acpi_physical_address;
-typedef u32 acpi_size;
-#define ALIGNED_ADDRESS_BOUNDARY 0x00000004
#define ACPI_MAX_PTR ACPI_UINT32_MAX
#define ACPI_SIZE_MAX ACPI_UINT32_MAX
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000004
+
+/*******************************************************************************
+ *
+ * Types specific to 16-bit targets
+ *
+ ******************************************************************************/
+
+#elif ACPI_MACHINE_WIDTH == 16
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned long UINT32;
+typedef short INT16;
+typedef long INT32;
+
+/*! [End] no source code translation !*/
+
+typedef u16 acpi_native_uint;
+typedef s16 acpi_native_int;
+
+typedef u32 acpi_table_ptr;
+typedef u32 acpi_io_address;
+typedef char *acpi_physical_address;
+
+#define ACPI_MAX_PTR ACPI_UINT16_MAX
+#define ACPI_SIZE_MAX ACPI_UINT16_MAX
+
+#define ALIGNED_ADDRESS_BOUNDARY 0x00000002
+#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
+
+/* 64-bit integers cannot be supported */
+
+#define ACPI_NO_INTEGER64_SUPPORT
+
#else
+
+/* ACPI_MACHINE_WIDTH must be either 64, 32, or 16 */
+
#error unknown ACPI_MACHINE_WIDTH
#endif
+/*******************************************************************************
+ *
+ * OS- or compiler-dependent types
+ *
+ ******************************************************************************/
+
/*
- * This type is used for bitfields in ACPI tables. The only type that is
- * even remotely portable is u8. Anything else is not portable, so
- * do not add any more bitfield types.
+ * If acpi_uintptr_t was not defined in the OS- or compiler-dependent header,
+ * define it now (use C99 uintptr_t for pointer casting if available,
+ * "void *" otherwise)
*/
-typedef u8 UINT8_BIT;
-typedef acpi_native_uint ACPI_PTRDIFF;
+#ifndef acpi_uintptr_t
+#define acpi_uintptr_t void *
+#endif
+
+/*
+ * If acpi_cache_t was not defined in the OS-dependent header,
+ * define it now. This is typically the case where the local cache
+ * manager implementation is to be used (ACPI_USE_LOCAL_CACHE)
+ */
+#ifndef acpi_cache_t
+#define acpi_cache_t struct acpi_memory_list
+#endif
+
+/* Variable-width type, used instead of clib size_t */
+
+typedef acpi_native_uint acpi_size;
+
+/*******************************************************************************
+ *
+ * Independent types
+ *
+ ******************************************************************************/
/*
* Pointer overlays to avoid lots of typecasting for
@@ -237,18 +301,8 @@
#define ACPI_LOGMODE_PHYSPTR ACPI_LOGICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
#define ACPI_LOGMODE_LOGPTR ACPI_LOGICAL_ADDRESSING | ACPI_LOGICAL_POINTER
-/*
- * If acpi_cache_t was not defined in the OS-dependent header,
- * define it now. This is typically the case where the local cache
- * manager implementation is to be used (ACPI_USE_LOCAL_CACHE)
- */
-#ifndef acpi_cache_t
-#define acpi_cache_t struct acpi_memory_list
-#endif
+/* Logical defines and NULL */
-/*
- * Useful defines
- */
#ifdef FALSE
#undef FALSE
#endif
@@ -264,12 +318,12 @@
#endif
/*
- * Local datatypes
+ * Mescellaneous types
*/
typedef u32 acpi_status; /* All ACPI Exceptions */
typedef u32 acpi_name; /* 4-byte ACPI name */
typedef char *acpi_string; /* Null terminated ASCII string */
-typedef void *acpi_handle; /* Actually a ptr to an Node */
+typedef void *acpi_handle; /* Actually a ptr to a NS Node */
struct uint64_struct {
u32 lo;
@@ -473,37 +527,6 @@
#define ACPI_TYPE_NOT_FOUND 0xFF
/*
- * Bitmapped ACPI types. Used internally only
- */
-#define ACPI_BTYPE_ANY 0x00000000
-#define ACPI_BTYPE_INTEGER 0x00000001
-#define ACPI_BTYPE_STRING 0x00000002
-#define ACPI_BTYPE_BUFFER 0x00000004
-#define ACPI_BTYPE_PACKAGE 0x00000008
-#define ACPI_BTYPE_FIELD_UNIT 0x00000010
-#define ACPI_BTYPE_DEVICE 0x00000020
-#define ACPI_BTYPE_EVENT 0x00000040
-#define ACPI_BTYPE_METHOD 0x00000080
-#define ACPI_BTYPE_MUTEX 0x00000100
-#define ACPI_BTYPE_REGION 0x00000200
-#define ACPI_BTYPE_POWER 0x00000400
-#define ACPI_BTYPE_PROCESSOR 0x00000800
-#define ACPI_BTYPE_THERMAL 0x00001000
-#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
-#define ACPI_BTYPE_DDB_HANDLE 0x00004000
-#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
-#define ACPI_BTYPE_REFERENCE 0x00010000
-#define ACPI_BTYPE_RESOURCE 0x00020000
-
-#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
-
-#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
-#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
-#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
-#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
-#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
-
-/*
* All I/O
*/
#define ACPI_READ 0
@@ -856,6 +879,14 @@
#define ACPI_VALID_CID 0x0010
#define ACPI_VALID_SXDS 0x0020
+/* Flags for _STA method */
+
+#define ACPI_STA_DEVICE_PRESENT 0x01
+#define ACPI_STA_DEVICE_ENABLED 0x02
+#define ACPI_STA_DEVICE_UI 0x04
+#define ACPI_STA_DEVICE_OK 0x08
+#define ACPI_STA_BATTERY_PRESENT 0x10
+
#define ACPI_COMMON_OBJ_INFO \
acpi_object_type type; /* ACPI object type */ \
acpi_name name /* ACPI object Name */
@@ -921,7 +952,9 @@
#define ACPI_ISA_ONLY_RANGES (u8) 0x02
#define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES)
-#define ACPI_SPARSE_TRANSLATION (u8) 0x03
+/* Type of translation - 1=Sparse, 0=Dense */
+
+#define ACPI_SPARSE_TRANSLATION (u8) 0x01
/*
* IO Port Descriptor Decode
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index 4ff9633..5fa21e0 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -46,6 +46,30 @@
extern const u8 acpi_gbl_resource_aml_sizes[];
+/* Strings used by the disassembler and debugger resource dump routines */
+
+#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
+
+extern const char *acpi_gbl_BMdecode[2];
+extern const char *acpi_gbl_config_decode[4];
+extern const char *acpi_gbl_consume_decode[2];
+extern const char *acpi_gbl_DECdecode[2];
+extern const char *acpi_gbl_HEdecode[2];
+extern const char *acpi_gbl_io_decode[2];
+extern const char *acpi_gbl_LLdecode[2];
+extern const char *acpi_gbl_max_decode[2];
+extern const char *acpi_gbl_MEMdecode[4];
+extern const char *acpi_gbl_min_decode[2];
+extern const char *acpi_gbl_MTPdecode[4];
+extern const char *acpi_gbl_RNGdecode[4];
+extern const char *acpi_gbl_RWdecode[2];
+extern const char *acpi_gbl_SHRdecode[2];
+extern const char *acpi_gbl_SIZdecode[4];
+extern const char *acpi_gbl_TRSdecode[2];
+extern const char *acpi_gbl_TTPdecode[2];
+extern const char *acpi_gbl_TYPdecode[4];
+#endif
+
/* Types for Resource descriptor entries */
#define ACPI_INVALID_RESOURCE 0