| /* |
| * Driver for the Atmel USBA high speed USB device controller |
| * |
| * Copyright (C) 2005-2007 Atmel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #ifndef __LINUX_USB_GADGET_USBA_UDC_H__ |
| #define __LINUX_USB_GADGET_USBA_UDC_H__ |
| |
| /* USB register offsets */ |
| #define USBA_CTRL 0x0000 |
| #define USBA_FNUM 0x0004 |
| #define USBA_INT_ENB 0x0010 |
| #define USBA_INT_STA 0x0014 |
| #define USBA_INT_CLR 0x0018 |
| #define USBA_EPT_RST 0x001c |
| #define USBA_TST 0x00e0 |
| |
| /* USB endpoint register offsets */ |
| #define USBA_EPT_CFG 0x0000 |
| #define USBA_EPT_CTL_ENB 0x0004 |
| #define USBA_EPT_CTL_DIS 0x0008 |
| #define USBA_EPT_CTL 0x000c |
| #define USBA_EPT_SET_STA 0x0014 |
| #define USBA_EPT_CLR_STA 0x0018 |
| #define USBA_EPT_STA 0x001c |
| |
| /* USB DMA register offsets */ |
| #define USBA_DMA_NXT_DSC 0x0000 |
| #define USBA_DMA_ADDRESS 0x0004 |
| #define USBA_DMA_CONTROL 0x0008 |
| #define USBA_DMA_STATUS 0x000c |
| |
| /* Bitfields in CTRL */ |
| #define USBA_DEV_ADDR_OFFSET 0 |
| #define USBA_DEV_ADDR_SIZE 7 |
| #define USBA_FADDR_EN (1 << 7) |
| #define USBA_EN_USBA (1 << 8) |
| #define USBA_DETACH (1 << 9) |
| #define USBA_REMOTE_WAKE_UP (1 << 10) |
| #define USBA_PULLD_DIS (1 << 11) |
| |
| #if defined(CONFIG_AVR32) |
| #define USBA_ENABLE_MASK USBA_EN_USBA |
| #define USBA_DISABLE_MASK 0 |
| #elif defined(CONFIG_ARCH_AT91) |
| #define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS) |
| #define USBA_DISABLE_MASK USBA_DETACH |
| #endif /* CONFIG_ARCH_AT91 */ |
| |
| /* Bitfields in FNUM */ |
| #define USBA_MICRO_FRAME_NUM_OFFSET 0 |
| #define USBA_MICRO_FRAME_NUM_SIZE 3 |
| #define USBA_FRAME_NUMBER_OFFSET 3 |
| #define USBA_FRAME_NUMBER_SIZE 11 |
| #define USBA_FRAME_NUM_ERROR (1 << 31) |
| |
| /* Bitfields in INT_ENB/INT_STA/INT_CLR */ |
| #define USBA_HIGH_SPEED (1 << 0) |
| #define USBA_DET_SUSPEND (1 << 1) |
| #define USBA_MICRO_SOF (1 << 2) |
| #define USBA_SOF (1 << 3) |
| #define USBA_END_OF_RESET (1 << 4) |
| #define USBA_WAKE_UP (1 << 5) |
| #define USBA_END_OF_RESUME (1 << 6) |
| #define USBA_UPSTREAM_RESUME (1 << 7) |
| #define USBA_EPT_INT_OFFSET 8 |
| #define USBA_EPT_INT_SIZE 16 |
| #define USBA_DMA_INT_OFFSET 24 |
| #define USBA_DMA_INT_SIZE 8 |
| |
| /* Bitfields in EPT_RST */ |
| #define USBA_RST_OFFSET 0 |
| #define USBA_RST_SIZE 16 |
| |
| /* Bitfields in USBA_TST */ |
| #define USBA_SPEED_CFG_OFFSET 0 |
| #define USBA_SPEED_CFG_SIZE 2 |
| #define USBA_TST_J_MODE (1 << 2) |
| #define USBA_TST_K_MODE (1 << 3) |
| #define USBA_TST_PKT_MODE (1 << 4) |
| #define USBA_OPMODE2 (1 << 5) |
| |
| /* Bitfields in EPT_CFG */ |
| #define USBA_EPT_SIZE_OFFSET 0 |
| #define USBA_EPT_SIZE_SIZE 3 |
| #define USBA_EPT_DIR_IN (1 << 3) |
| #define USBA_EPT_TYPE_OFFSET 4 |
| #define USBA_EPT_TYPE_SIZE 2 |
| #define USBA_BK_NUMBER_OFFSET 6 |
| #define USBA_BK_NUMBER_SIZE 2 |
| #define USBA_NB_TRANS_OFFSET 8 |
| #define USBA_NB_TRANS_SIZE 2 |
| #define USBA_EPT_MAPPED (1 << 31) |
| |
| /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ |
| #define USBA_EPT_ENABLE (1 << 0) |
| #define USBA_AUTO_VALID (1 << 1) |
| #define USBA_INTDIS_DMA (1 << 3) |
| #define USBA_NYET_DIS (1 << 4) |
| #define USBA_DATAX_RX (1 << 6) |
| #define USBA_MDATA_RX (1 << 7) |
| /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ |
| #define USBA_BUSY_BANK_IE (1 << 18) |
| |
| /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ |
| #define USBA_FORCE_STALL (1 << 5) |
| #define USBA_TOGGLE_CLR (1 << 6) |
| #define USBA_TOGGLE_SEQ_OFFSET 6 |
| #define USBA_TOGGLE_SEQ_SIZE 2 |
| #define USBA_ERR_OVFLW (1 << 8) |
| #define USBA_RX_BK_RDY (1 << 9) |
| #define USBA_KILL_BANK (1 << 9) |
| #define USBA_TX_COMPLETE (1 << 10) |
| #define USBA_TX_PK_RDY (1 << 11) |
| #define USBA_ISO_ERR_TRANS (1 << 11) |
| #define USBA_RX_SETUP (1 << 12) |
| #define USBA_ISO_ERR_FLOW (1 << 12) |
| #define USBA_STALL_SENT (1 << 13) |
| #define USBA_ISO_ERR_CRC (1 << 13) |
| #define USBA_ISO_ERR_NBTRANS (1 << 13) |
| #define USBA_NAK_IN (1 << 14) |
| #define USBA_ISO_ERR_FLUSH (1 << 14) |
| #define USBA_NAK_OUT (1 << 15) |
| #define USBA_CURRENT_BANK_OFFSET 16 |
| #define USBA_CURRENT_BANK_SIZE 2 |
| #define USBA_BUSY_BANKS_OFFSET 18 |
| #define USBA_BUSY_BANKS_SIZE 2 |
| #define USBA_BYTE_COUNT_OFFSET 20 |
| #define USBA_BYTE_COUNT_SIZE 11 |
| #define USBA_SHORT_PACKET (1 << 31) |
| |
| /* Bitfields in DMA_CONTROL */ |
| #define USBA_DMA_CH_EN (1 << 0) |
| #define USBA_DMA_LINK (1 << 1) |
| #define USBA_DMA_END_TR_EN (1 << 2) |
| #define USBA_DMA_END_BUF_EN (1 << 3) |
| #define USBA_DMA_END_TR_IE (1 << 4) |
| #define USBA_DMA_END_BUF_IE (1 << 5) |
| #define USBA_DMA_DESC_LOAD_IE (1 << 6) |
| #define USBA_DMA_BURST_LOCK (1 << 7) |
| #define USBA_DMA_BUF_LEN_OFFSET 16 |
| #define USBA_DMA_BUF_LEN_SIZE 16 |
| |
| /* Bitfields in DMA_STATUS */ |
| #define USBA_DMA_CH_ACTIVE (1 << 1) |
| #define USBA_DMA_END_TR_ST (1 << 4) |
| #define USBA_DMA_END_BUF_ST (1 << 5) |
| #define USBA_DMA_DESC_LOAD_ST (1 << 6) |
| |
| /* Constants for SPEED_CFG */ |
| #define USBA_SPEED_CFG_NORMAL 0 |
| #define USBA_SPEED_CFG_FORCE_HIGH 2 |
| #define USBA_SPEED_CFG_FORCE_FULL 3 |
| |
| /* Constants for EPT_SIZE */ |
| #define USBA_EPT_SIZE_8 0 |
| #define USBA_EPT_SIZE_16 1 |
| #define USBA_EPT_SIZE_32 2 |
| #define USBA_EPT_SIZE_64 3 |
| #define USBA_EPT_SIZE_128 4 |
| #define USBA_EPT_SIZE_256 5 |
| #define USBA_EPT_SIZE_512 6 |
| #define USBA_EPT_SIZE_1024 7 |
| |
| /* Constants for EPT_TYPE */ |
| #define USBA_EPT_TYPE_CONTROL 0 |
| #define USBA_EPT_TYPE_ISO 1 |
| #define USBA_EPT_TYPE_BULK 2 |
| #define USBA_EPT_TYPE_INT 3 |
| |
| /* Constants for BK_NUMBER */ |
| #define USBA_BK_NUMBER_ZERO 0 |
| #define USBA_BK_NUMBER_ONE 1 |
| #define USBA_BK_NUMBER_DOUBLE 2 |
| #define USBA_BK_NUMBER_TRIPLE 3 |
| |
| /* Bit manipulation macros */ |
| #define USBA_BF(name, value) \ |
| (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ |
| << USBA_##name##_OFFSET) |
| #define USBA_BFEXT(name, value) \ |
| (((value) >> USBA_##name##_OFFSET) \ |
| & ((1 << USBA_##name##_SIZE) - 1)) |
| #define USBA_BFINS(name, value, old) \ |
| (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ |
| << USBA_##name##_OFFSET)) \ |
| | USBA_BF(name, value)) |
| |
| /* Register access macros */ |
| #ifdef CONFIG_AVR32 |
| #define usba_io_readl __raw_readl |
| #define usba_io_writel __raw_writel |
| #define usba_io_writew __raw_writew |
| #else |
| #define usba_io_readl readl_relaxed |
| #define usba_io_writel writel_relaxed |
| #define usba_io_writew writew_relaxed |
| #endif |
| |
| #define usba_readl(udc, reg) \ |
| usba_io_readl((udc)->regs + USBA_##reg) |
| #define usba_writel(udc, reg, value) \ |
| usba_io_writel((value), (udc)->regs + USBA_##reg) |
| #define usba_ep_readl(ep, reg) \ |
| usba_io_readl((ep)->ep_regs + USBA_EPT_##reg) |
| #define usba_ep_writel(ep, reg, value) \ |
| usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg) |
| #define usba_dma_readl(ep, reg) \ |
| usba_io_readl((ep)->dma_regs + USBA_DMA_##reg) |
| #define usba_dma_writel(ep, reg, value) \ |
| usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg) |
| |
| /* Calculate base address for a given endpoint or DMA controller */ |
| #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) |
| #define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) |
| #define USBA_FIFO_BASE(x) ((x) << 16) |
| |
| /* Synth parameters */ |
| #define USBA_NR_DMAS 7 |
| |
| #define EP0_FIFO_SIZE 64 |
| #define EP0_EPT_SIZE USBA_EPT_SIZE_64 |
| #define EP0_NR_BANKS 1 |
| |
| #define FIFO_IOMEM_ID 0 |
| #define CTRL_IOMEM_ID 1 |
| |
| #define DBG_ERR 0x0001 /* report all error returns */ |
| #define DBG_HW 0x0002 /* debug hardware initialization */ |
| #define DBG_GADGET 0x0004 /* calls to/from gadget driver */ |
| #define DBG_INT 0x0008 /* interrupts */ |
| #define DBG_BUS 0x0010 /* report changes in bus state */ |
| #define DBG_QUEUE 0x0020 /* debug request queue processing */ |
| #define DBG_FIFO 0x0040 /* debug FIFO contents */ |
| #define DBG_DMA 0x0080 /* debug DMA handling */ |
| #define DBG_REQ 0x0100 /* print out queued request length */ |
| #define DBG_ALL 0xffff |
| #define DBG_NONE 0x0000 |
| |
| #define DEBUG_LEVEL (DBG_ERR) |
| |
| #define DBG(level, fmt, ...) \ |
| do { \ |
| if ((level) & DEBUG_LEVEL) \ |
| pr_debug("udc: " fmt, ## __VA_ARGS__); \ |
| } while (0) |
| |
| enum usba_ctrl_state { |
| WAIT_FOR_SETUP, |
| DATA_STAGE_IN, |
| DATA_STAGE_OUT, |
| STATUS_STAGE_IN, |
| STATUS_STAGE_OUT, |
| STATUS_STAGE_ADDR, |
| STATUS_STAGE_TEST, |
| }; |
| /* |
| EP_STATE_IDLE, |
| EP_STATE_SETUP, |
| EP_STATE_IN_DATA, |
| EP_STATE_OUT_DATA, |
| EP_STATE_SET_ADDR_STATUS, |
| EP_STATE_RX_STATUS, |
| EP_STATE_TX_STATUS, |
| EP_STATE_HALT, |
| */ |
| |
| struct usba_dma_desc { |
| dma_addr_t next; |
| dma_addr_t addr; |
| u32 ctrl; |
| }; |
| |
| struct usba_ep { |
| int state; |
| void __iomem *ep_regs; |
| void __iomem *dma_regs; |
| void __iomem *fifo; |
| struct usb_ep ep; |
| struct usba_udc *udc; |
| |
| struct list_head queue; |
| |
| u16 fifo_size; |
| u8 nr_banks; |
| u8 index; |
| unsigned int can_dma:1; |
| unsigned int can_isoc:1; |
| unsigned int is_isoc:1; |
| unsigned int is_in:1; |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FS |
| u32 last_dma_status; |
| struct dentry *debugfs_dir; |
| struct dentry *debugfs_queue; |
| struct dentry *debugfs_dma_status; |
| struct dentry *debugfs_state; |
| #endif |
| }; |
| |
| struct usba_request { |
| struct usb_request req; |
| struct list_head queue; |
| |
| u32 ctrl; |
| |
| unsigned int submitted:1; |
| unsigned int last_transaction:1; |
| unsigned int using_dma:1; |
| unsigned int mapped:1; |
| }; |
| |
| struct usba_udc_errata { |
| void (*toggle_bias)(struct usba_udc *udc, int is_on); |
| void (*pulse_bias)(struct usba_udc *udc); |
| }; |
| |
| struct usba_udc { |
| /* Protect hw registers from concurrent modifications */ |
| spinlock_t lock; |
| |
| /* Mutex to prevent concurrent start or stop */ |
| struct mutex vbus_mutex; |
| |
| void __iomem *regs; |
| void __iomem *fifo; |
| |
| struct usb_gadget gadget; |
| struct usb_gadget_driver *driver; |
| struct platform_device *pdev; |
| const struct usba_udc_errata *errata; |
| int irq; |
| int vbus_pin; |
| int vbus_pin_inverted; |
| int num_ep; |
| struct clk *pclk; |
| struct clk *hclk; |
| struct usba_ep *usba_ep; |
| bool bias_pulse_needed; |
| bool clocked; |
| |
| u16 devstatus; |
| |
| u16 test_mode; |
| int vbus_prev; |
| |
| u32 int_enb_cache; |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FS |
| struct dentry *debugfs_root; |
| struct dentry *debugfs_regs; |
| #endif |
| |
| struct regmap *pmc; |
| }; |
| |
| static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) |
| { |
| return container_of(ep, struct usba_ep, ep); |
| } |
| |
| static inline struct usba_request *to_usba_req(struct usb_request *req) |
| { |
| return container_of(req, struct usba_request, req); |
| } |
| |
| static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) |
| { |
| return container_of(gadget, struct usba_udc, gadget); |
| } |
| |
| #define ep_is_control(ep) ((ep)->index == 0) |
| #define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) |
| |
| #endif /* __LINUX_USB_GADGET_USBA_UDC_H */ |