| /****************************************************************************/ |
| |
| /* |
| * fec.h -- Fast Ethernet Controller for Motorola ColdFire SoC |
| * processors. |
| * |
| * (C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com) |
| * (C) Copyright 2000-2001, Lineo (www.lineo.com) |
| */ |
| |
| /****************************************************************************/ |
| #ifndef FEC_H |
| #define FEC_H |
| /****************************************************************************/ |
| |
| #include <linux/clocksource.h> |
| #include <linux/net_tstamp.h> |
| #include <linux/ptp_clock_kernel.h> |
| |
| #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ |
| defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ |
| defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) |
| /* |
| * Just figures, Motorola would have to change the offsets for |
| * registers in the same peripheral device on different models |
| * of the ColdFire! |
| */ |
| #define FEC_IEVENT 0x004 /* Interrupt event reg */ |
| #define FEC_IMASK 0x008 /* Interrupt mask reg */ |
| #define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */ |
| #define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */ |
| #define FEC_ECNTRL 0x024 /* Ethernet control reg */ |
| #define FEC_MII_DATA 0x040 /* MII manage frame reg */ |
| #define FEC_MII_SPEED 0x044 /* MII speed control reg */ |
| #define FEC_MIB_CTRLSTAT 0x064 /* MIB control/status reg */ |
| #define FEC_R_CNTRL 0x084 /* Receive control reg */ |
| #define FEC_X_CNTRL 0x0c4 /* Transmit Control reg */ |
| #define FEC_ADDR_LOW 0x0e4 /* Low 32bits MAC address */ |
| #define FEC_ADDR_HIGH 0x0e8 /* High 16bits MAC address */ |
| #define FEC_OPD 0x0ec /* Opcode + Pause duration */ |
| #define FEC_TXIC0 0x0f0 /* Tx Interrupt Coalescing for ring 0 */ |
| #define FEC_TXIC1 0x0f4 /* Tx Interrupt Coalescing for ring 1 */ |
| #define FEC_TXIC2 0x0f8 /* Tx Interrupt Coalescing for ring 2 */ |
| #define FEC_RXIC0 0x100 /* Rx Interrupt Coalescing for ring 0 */ |
| #define FEC_RXIC1 0x104 /* Rx Interrupt Coalescing for ring 1 */ |
| #define FEC_RXIC2 0x108 /* Rx Interrupt Coalescing for ring 2 */ |
| #define FEC_HASH_TABLE_HIGH 0x118 /* High 32bits hash table */ |
| #define FEC_HASH_TABLE_LOW 0x11c /* Low 32bits hash table */ |
| #define FEC_GRP_HASH_TABLE_HIGH 0x120 /* High 32bits hash table */ |
| #define FEC_GRP_HASH_TABLE_LOW 0x124 /* Low 32bits hash table */ |
| #define FEC_X_WMRK 0x144 /* FIFO transmit water mark */ |
| #define FEC_R_BOUND 0x14c /* FIFO receive bound reg */ |
| #define FEC_R_FSTART 0x150 /* FIFO receive start reg */ |
| #define FEC_R_DES_START_1 0x160 /* Receive descriptor ring 1 */ |
| #define FEC_X_DES_START_1 0x164 /* Transmit descriptor ring 1 */ |
| #define FEC_R_DES_START_2 0x16c /* Receive descriptor ring 2 */ |
| #define FEC_X_DES_START_2 0x170 /* Transmit descriptor ring 2 */ |
| #define FEC_R_DES_START_0 0x180 /* Receive descriptor ring */ |
| #define FEC_X_DES_START_0 0x184 /* Transmit descriptor ring */ |
| #define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */ |
| #define FEC_R_FIFO_RSFL 0x190 /* Receive FIFO section full threshold */ |
| #define FEC_R_FIFO_RSEM 0x194 /* Receive FIFO section empty threshold */ |
| #define FEC_R_FIFO_RAEM 0x198 /* Receive FIFO almost empty threshold */ |
| #define FEC_R_FIFO_RAFL 0x19c /* Receive FIFO almost full threshold */ |
| #define FEC_RACC 0x1c4 /* Receive Accelerator function */ |
| #define FEC_RCMR_1 0x1c8 /* Receive classification match ring 1 */ |
| #define FEC_RCMR_2 0x1cc /* Receive classification match ring 2 */ |
| #define FEC_DMA_CFG_1 0x1d8 /* DMA class configuration for ring 1 */ |
| #define FEC_DMA_CFG_2 0x1dc /* DMA class Configuration for ring 2 */ |
| #define FEC_R_DES_ACTIVE_1 0x1e0 /* Rx descriptor active for ring 1 */ |
| #define FEC_X_DES_ACTIVE_1 0x1e4 /* Tx descriptor active for ring 1 */ |
| #define FEC_R_DES_ACTIVE_2 0x1e8 /* Rx descriptor active for ring 2 */ |
| #define FEC_X_DES_ACTIVE_2 0x1ec /* Tx descriptor active for ring 2 */ |
| #define FEC_QOS_SCHEME 0x1f0 /* Set multi queues Qos scheme */ |
| #define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ |
| #define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ |
| |
| #define BM_MIIGSK_CFGR_MII 0x00 |
| #define BM_MIIGSK_CFGR_RMII 0x01 |
| #define BM_MIIGSK_CFGR_FRCONT_10M 0x40 |
| |
| #define RMON_T_DROP 0x200 /* Count of frames not cntd correctly */ |
| #define RMON_T_PACKETS 0x204 /* RMON TX packet count */ |
| #define RMON_T_BC_PKT 0x208 /* RMON TX broadcast pkts */ |
| #define RMON_T_MC_PKT 0x20c /* RMON TX multicast pkts */ |
| #define RMON_T_CRC_ALIGN 0x210 /* RMON TX pkts with CRC align err */ |
| #define RMON_T_UNDERSIZE 0x214 /* RMON TX pkts < 64 bytes, good CRC */ |
| #define RMON_T_OVERSIZE 0x218 /* RMON TX pkts > MAX_FL bytes good CRC */ |
| #define RMON_T_FRAG 0x21c /* RMON TX pkts < 64 bytes, bad CRC */ |
| #define RMON_T_JAB 0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */ |
| #define RMON_T_COL 0x224 /* RMON TX collision count */ |
| #define RMON_T_P64 0x228 /* RMON TX 64 byte pkts */ |
| #define RMON_T_P65TO127 0x22c /* RMON TX 65 to 127 byte pkts */ |
| #define RMON_T_P128TO255 0x230 /* RMON TX 128 to 255 byte pkts */ |
| #define RMON_T_P256TO511 0x234 /* RMON TX 256 to 511 byte pkts */ |
| #define RMON_T_P512TO1023 0x238 /* RMON TX 512 to 1023 byte pkts */ |
| #define RMON_T_P1024TO2047 0x23c /* RMON TX 1024 to 2047 byte pkts */ |
| #define RMON_T_P_GTE2048 0x240 /* RMON TX pkts > 2048 bytes */ |
| #define RMON_T_OCTETS 0x244 /* RMON TX octets */ |
| #define IEEE_T_DROP 0x248 /* Count of frames not counted crtly */ |
| #define IEEE_T_FRAME_OK 0x24c /* Frames tx'd OK */ |
| #define IEEE_T_1COL 0x250 /* Frames tx'd with single collision */ |
| #define IEEE_T_MCOL 0x254 /* Frames tx'd with multiple collision */ |
| #define IEEE_T_DEF 0x258 /* Frames tx'd after deferral delay */ |
| #define IEEE_T_LCOL 0x25c /* Frames tx'd with late collision */ |
| #define IEEE_T_EXCOL 0x260 /* Frames tx'd with excesv collisions */ |
| #define IEEE_T_MACERR 0x264 /* Frames tx'd with TX FIFO underrun */ |
| #define IEEE_T_CSERR 0x268 /* Frames tx'd with carrier sense err */ |
| #define IEEE_T_SQE 0x26c /* Frames tx'd with SQE err */ |
| #define IEEE_T_FDXFC 0x270 /* Flow control pause frames tx'd */ |
| #define IEEE_T_OCTETS_OK 0x274 /* Octet count for frames tx'd w/o err */ |
| #define RMON_R_PACKETS 0x284 /* RMON RX packet count */ |
| #define RMON_R_BC_PKT 0x288 /* RMON RX broadcast pkts */ |
| #define RMON_R_MC_PKT 0x28c /* RMON RX multicast pkts */ |
| #define RMON_R_CRC_ALIGN 0x290 /* RMON RX pkts with CRC alignment err */ |
| #define RMON_R_UNDERSIZE 0x294 /* RMON RX pkts < 64 bytes, good CRC */ |
| #define RMON_R_OVERSIZE 0x298 /* RMON RX pkts > MAX_FL bytes good CRC */ |
| #define RMON_R_FRAG 0x29c /* RMON RX pkts < 64 bytes, bad CRC */ |
| #define RMON_R_JAB 0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */ |
| #define RMON_R_RESVD_O 0x2a4 /* Reserved */ |
| #define RMON_R_P64 0x2a8 /* RMON RX 64 byte pkts */ |
| #define RMON_R_P65TO127 0x2ac /* RMON RX 65 to 127 byte pkts */ |
| #define RMON_R_P128TO255 0x2b0 /* RMON RX 128 to 255 byte pkts */ |
| #define RMON_R_P256TO511 0x2b4 /* RMON RX 256 to 511 byte pkts */ |
| #define RMON_R_P512TO1023 0x2b8 /* RMON RX 512 to 1023 byte pkts */ |
| #define RMON_R_P1024TO2047 0x2bc /* RMON RX 1024 to 2047 byte pkts */ |
| #define RMON_R_P_GTE2048 0x2c0 /* RMON RX pkts > 2048 bytes */ |
| #define RMON_R_OCTETS 0x2c4 /* RMON RX octets */ |
| #define IEEE_R_DROP 0x2c8 /* Count frames not counted correctly */ |
| #define IEEE_R_FRAME_OK 0x2cc /* Frames rx'd OK */ |
| #define IEEE_R_CRC 0x2d0 /* Frames rx'd with CRC err */ |
| #define IEEE_R_ALIGN 0x2d4 /* Frames rx'd with alignment err */ |
| #define IEEE_R_MACERR 0x2d8 /* Receive FIFO overflow count */ |
| #define IEEE_R_FDXFC 0x2dc /* Flow control pause frames rx'd */ |
| #define IEEE_R_OCTETS_OK 0x2e0 /* Octet cnt for frames rx'd w/o err */ |
| |
| #else |
| |
| #define FEC_ECNTRL 0x000 /* Ethernet control reg */ |
| #define FEC_IEVENT 0x004 /* Interrupt even reg */ |
| #define FEC_IMASK 0x008 /* Interrupt mask reg */ |
| #define FEC_IVEC 0x00c /* Interrupt vec status reg */ |
| #define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */ |
| #define FEC_R_DES_ACTIVE_1 FEC_R_DES_ACTIVE_0 |
| #define FEC_R_DES_ACTIVE_2 FEC_R_DES_ACTIVE_0 |
| #define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */ |
| #define FEC_X_DES_ACTIVE_1 FEC_X_DES_ACTIVE_0 |
| #define FEC_X_DES_ACTIVE_2 FEC_X_DES_ACTIVE_0 |
| #define FEC_MII_DATA 0x040 /* MII manage frame reg */ |
| #define FEC_MII_SPEED 0x044 /* MII speed control reg */ |
| #define FEC_R_BOUND 0x08c /* FIFO receive bound reg */ |
| #define FEC_R_FSTART 0x090 /* FIFO receive start reg */ |
| #define FEC_X_WMRK 0x0a4 /* FIFO transmit water mark */ |
| #define FEC_X_FSTART 0x0ac /* FIFO transmit start reg */ |
| #define FEC_R_CNTRL 0x104 /* Receive control reg */ |
| #define FEC_MAX_FRM_LEN 0x108 /* Maximum frame length reg */ |
| #define FEC_X_CNTRL 0x144 /* Transmit Control reg */ |
| #define FEC_ADDR_LOW 0x3c0 /* Low 32bits MAC address */ |
| #define FEC_ADDR_HIGH 0x3c4 /* High 16bits MAC address */ |
| #define FEC_GRP_HASH_TABLE_HIGH 0x3c8 /* High 32bits hash table */ |
| #define FEC_GRP_HASH_TABLE_LOW 0x3cc /* Low 32bits hash table */ |
| #define FEC_R_DES_START_0 0x3d0 /* Receive descriptor ring */ |
| #define FEC_R_DES_START_1 FEC_R_DES_START_0 |
| #define FEC_R_DES_START_2 FEC_R_DES_START_0 |
| #define FEC_X_DES_START_0 0x3d4 /* Transmit descriptor ring */ |
| #define FEC_X_DES_START_1 FEC_X_DES_START_0 |
| #define FEC_X_DES_START_2 FEC_X_DES_START_0 |
| #define FEC_R_BUFF_SIZE 0x3d8 /* Maximum receive buff size */ |
| #define FEC_FIFO_RAM 0x400 /* FIFO RAM buffer */ |
| /* Not existed in real chip |
| * Just for pass build. |
| */ |
| #define FEC_RCMR_1 0xfff |
| #define FEC_RCMR_2 0xfff |
| #define FEC_DMA_CFG_1 0xfff |
| #define FEC_DMA_CFG_2 0xfff |
| #define FEC_TXIC0 0xfff |
| #define FEC_TXIC1 0xfff |
| #define FEC_TXIC2 0xfff |
| #define FEC_RXIC0 0xfff |
| #define FEC_RXIC1 0xfff |
| #define FEC_RXIC2 0xfff |
| #endif /* CONFIG_M5272 */ |
| |
| |
| /* |
| * Define the buffer descriptor structure. |
| */ |
| #if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) |
| struct bufdesc { |
| unsigned short cbd_datlen; /* Data length */ |
| unsigned short cbd_sc; /* Control and status info */ |
| unsigned long cbd_bufaddr; /* Buffer address */ |
| }; |
| #else |
| struct bufdesc { |
| unsigned short cbd_sc; /* Control and status info */ |
| unsigned short cbd_datlen; /* Data length */ |
| unsigned long cbd_bufaddr; /* Buffer address */ |
| }; |
| #endif |
| |
| struct bufdesc_ex { |
| struct bufdesc desc; |
| unsigned long cbd_esc; |
| unsigned long cbd_prot; |
| unsigned long cbd_bdu; |
| unsigned long ts; |
| unsigned short res0[4]; |
| }; |
| |
| /* |
| * The following definitions courtesy of commproc.h, which where |
| * Copyright (c) 1997 Dan Malek (dmalek@jlc.net). |
| */ |
| #define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ |
| #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ |
| #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ |
| #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ |
| #define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ |
| #define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ |
| #define BD_SC_P ((ushort)0x0100) /* xmt preamble */ |
| #define BD_SC_BR ((ushort)0x0020) /* Break received */ |
| #define BD_SC_FR ((ushort)0x0010) /* Framing error */ |
| #define BD_SC_PR ((ushort)0x0008) /* Parity error */ |
| #define BD_SC_OV ((ushort)0x0002) /* Overrun */ |
| #define BD_SC_CD ((ushort)0x0001) /* ?? */ |
| |
| /* Buffer descriptor control/status used by Ethernet receive. |
| */ |
| #define BD_ENET_RX_EMPTY ((ushort)0x8000) |
| #define BD_ENET_RX_WRAP ((ushort)0x2000) |
| #define BD_ENET_RX_INTR ((ushort)0x1000) |
| #define BD_ENET_RX_LAST ((ushort)0x0800) |
| #define BD_ENET_RX_FIRST ((ushort)0x0400) |
| #define BD_ENET_RX_MISS ((ushort)0x0100) |
| #define BD_ENET_RX_LG ((ushort)0x0020) |
| #define BD_ENET_RX_NO ((ushort)0x0010) |
| #define BD_ENET_RX_SH ((ushort)0x0008) |
| #define BD_ENET_RX_CR ((ushort)0x0004) |
| #define BD_ENET_RX_OV ((ushort)0x0002) |
| #define BD_ENET_RX_CL ((ushort)0x0001) |
| #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ |
| |
| /* Enhanced buffer descriptor control/status used by Ethernet receive */ |
| #define BD_ENET_RX_VLAN 0x00000004 |
| |
| /* Buffer descriptor control/status used by Ethernet transmit. |
| */ |
| #define BD_ENET_TX_READY ((ushort)0x8000) |
| #define BD_ENET_TX_PAD ((ushort)0x4000) |
| #define BD_ENET_TX_WRAP ((ushort)0x2000) |
| #define BD_ENET_TX_INTR ((ushort)0x1000) |
| #define BD_ENET_TX_LAST ((ushort)0x0800) |
| #define BD_ENET_TX_TC ((ushort)0x0400) |
| #define BD_ENET_TX_DEF ((ushort)0x0200) |
| #define BD_ENET_TX_HB ((ushort)0x0100) |
| #define BD_ENET_TX_LC ((ushort)0x0080) |
| #define BD_ENET_TX_RL ((ushort)0x0040) |
| #define BD_ENET_TX_RCMASK ((ushort)0x003c) |
| #define BD_ENET_TX_UN ((ushort)0x0002) |
| #define BD_ENET_TX_CSL ((ushort)0x0001) |
| #define BD_ENET_TX_STATS ((ushort)0x0fff) /* All status bits */ |
| |
| /* enhanced buffer descriptor control/status used by Ethernet transmit */ |
| #define BD_ENET_TX_INT 0x40000000 |
| #define BD_ENET_TX_TS 0x20000000 |
| #define BD_ENET_TX_PINS 0x10000000 |
| #define BD_ENET_TX_IINS 0x08000000 |
| |
| |
| /* This device has up to three irqs on some platforms */ |
| #define FEC_IRQ_NUM 3 |
| |
| /* Maximum number of queues supported |
| * ENET with AVB IP can support up to 3 independent tx queues and rx queues. |
| * User can point the queue number that is less than or equal to 3. |
| */ |
| #define FEC_ENET_MAX_TX_QS 3 |
| #define FEC_ENET_MAX_RX_QS 3 |
| |
| #define FEC_R_DES_START(X) (((X) == 1) ? FEC_R_DES_START_1 : \ |
| (((X) == 2) ? \ |
| FEC_R_DES_START_2 : FEC_R_DES_START_0)) |
| #define FEC_X_DES_START(X) (((X) == 1) ? FEC_X_DES_START_1 : \ |
| (((X) == 2) ? \ |
| FEC_X_DES_START_2 : FEC_X_DES_START_0)) |
| #define FEC_R_DES_ACTIVE(X) (((X) == 1) ? FEC_R_DES_ACTIVE_1 : \ |
| (((X) == 2) ? \ |
| FEC_R_DES_ACTIVE_2 : FEC_R_DES_ACTIVE_0)) |
| #define FEC_X_DES_ACTIVE(X) (((X) == 1) ? FEC_X_DES_ACTIVE_1 : \ |
| (((X) == 2) ? \ |
| FEC_X_DES_ACTIVE_2 : FEC_X_DES_ACTIVE_0)) |
| |
| #define FEC_DMA_CFG(X) (((X) == 2) ? FEC_DMA_CFG_2 : FEC_DMA_CFG_1) |
| |
| #define DMA_CLASS_EN (1 << 16) |
| #define FEC_RCMR(X) (((X) == 2) ? FEC_RCMR_2 : FEC_RCMR_1) |
| #define IDLE_SLOPE_MASK 0xffff |
| #define IDLE_SLOPE_1 0x200 /* BW fraction: 0.5 */ |
| #define IDLE_SLOPE_2 0x200 /* BW fraction: 0.5 */ |
| #define IDLE_SLOPE(X) (((X) == 1) ? \ |
| (IDLE_SLOPE_1 & IDLE_SLOPE_MASK) : \ |
| (IDLE_SLOPE_2 & IDLE_SLOPE_MASK)) |
| #define RCMR_MATCHEN (0x1 << 16) |
| #define RCMR_CMP_CFG(v, n) (((v) & 0x7) << (n << 2)) |
| #define RCMR_CMP_1 (RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \ |
| RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3)) |
| #define RCMR_CMP_2 (RCMR_CMP_CFG(4, 0) | RCMR_CMP_CFG(5, 1) | \ |
| RCMR_CMP_CFG(6, 2) | RCMR_CMP_CFG(7, 3)) |
| #define RCMR_CMP(X) (((X) == 1) ? RCMR_CMP_1 : RCMR_CMP_2) |
| #define FEC_TX_BD_FTYPE(X) (((X) & 0xf) << 20) |
| |
| /* The number of Tx and Rx buffers. These are allocated from the page |
| * pool. The code may assume these are power of two, so it it best |
| * to keep them that size. |
| * We don't need to allocate pages for the transmitter. We just use |
| * the skbuffer directly. |
| */ |
| |
| #define FEC_ENET_RX_PAGES 256 |
| #define FEC_ENET_RX_FRSIZE 2048 |
| #define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) |
| #define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) |
| #define FEC_ENET_TX_FRSIZE 2048 |
| #define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE) |
| #define TX_RING_SIZE 512 /* Must be power of two */ |
| #define TX_RING_MOD_MASK 511 /* for this to work */ |
| |
| #define BD_ENET_RX_INT 0x00800000 |
| #define BD_ENET_RX_PTP ((ushort)0x0400) |
| #define BD_ENET_RX_ICE 0x00000020 |
| #define BD_ENET_RX_PCR 0x00000010 |
| #define FLAG_RX_CSUM_ENABLED (BD_ENET_RX_ICE | BD_ENET_RX_PCR) |
| #define FLAG_RX_CSUM_ERROR (BD_ENET_RX_ICE | BD_ENET_RX_PCR) |
| |
| /* Interrupt events/masks. */ |
| #define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ |
| #define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ |
| #define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ |
| #define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ |
| #define FEC_ENET_TXF_0 ((uint)0x08000000) /* Full frame transmitted */ |
| #define FEC_ENET_TXF_1 ((uint)0x00000008) /* Full frame transmitted */ |
| #define FEC_ENET_TXF_2 ((uint)0x00000080) /* Full frame transmitted */ |
| #define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ |
| #define FEC_ENET_RXF_0 ((uint)0x02000000) /* Full frame received */ |
| #define FEC_ENET_RXF_1 ((uint)0x00000002) /* Full frame received */ |
| #define FEC_ENET_RXF_2 ((uint)0x00000020) /* Full frame received */ |
| #define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ |
| #define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ |
| #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ |
| #define FEC_ENET_TXF (FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2) |
| #define FEC_ENET_RXF (FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2) |
| #define FEC_ENET_TS_AVAIL ((uint)0x00010000) |
| #define FEC_ENET_TS_TIMER ((uint)0x00008000) |
| |
| #define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII | FEC_ENET_TS_TIMER) |
| #define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF)) |
| |
| /* ENET interrupt coalescing macro define */ |
| #define FEC_ITR_CLK_SEL (0x1 << 30) |
| #define FEC_ITR_EN (0x1 << 31) |
| #define FEC_ITR_ICFT(X) (((X) & 0xff) << 20) |
| #define FEC_ITR_ICTT(X) ((X) & 0xffff) |
| #define FEC_ITR_ICFT_DEFAULT 200 /* Set 200 frame count threshold */ |
| #define FEC_ITR_ICTT_DEFAULT 1000 /* Set 1000us timer threshold */ |
| |
| #define FEC_VLAN_TAG_LEN 0x04 |
| #define FEC_ETHTYPE_LEN 0x02 |
| |
| /* Controller is ENET-MAC */ |
| #define FEC_QUIRK_ENET_MAC (1 << 0) |
| /* Controller needs driver to swap frame */ |
| #define FEC_QUIRK_SWAP_FRAME (1 << 1) |
| /* Controller uses gasket */ |
| #define FEC_QUIRK_USE_GASKET (1 << 2) |
| /* Controller has GBIT support */ |
| #define FEC_QUIRK_HAS_GBIT (1 << 3) |
| /* Controller has extend desc buffer */ |
| #define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) |
| /* Controller has hardware checksum support */ |
| #define FEC_QUIRK_HAS_CSUM (1 << 5) |
| /* Controller has hardware vlan support */ |
| #define FEC_QUIRK_HAS_VLAN (1 << 6) |
| /* ENET IP errata ERR006358 |
| * |
| * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously |
| * detected as not set during a prior frame transmission, then the |
| * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs |
| * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in |
| * frames not being transmitted until there is a 0-to-1 transition on |
| * ENET_TDAR[TDAR]. |
| */ |
| #define FEC_QUIRK_ERR006358 (1 << 7) |
| /* ENET IP hw AVB |
| * |
| * i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support. |
| * - Two class indicators on receive with configurable priority |
| * - Two class indicators and line speed timer on transmit allowing |
| * implementation class credit based shapers externally |
| * - Additional DMA registers provisioned to allow managing up to 3 |
| * independent rings |
| */ |
| #define FEC_QUIRK_HAS_AVB (1 << 8) |
| /* There is a TDAR race condition for mutliQ when the software sets TDAR |
| * and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). |
| * This will cause the udma_tx and udma_tx_arbiter state machines to hang. |
| * The issue exist at i.MX6SX enet IP. |
| */ |
| #define FEC_QUIRK_ERR007885 (1 << 9) |
| /* ENET Block Guide/ Chapter for the iMX6SX (PELE) address one issue: |
| * After set ENET_ATCR[Capture], there need some time cycles before the counter |
| * value is capture in the register clock domain. |
| * The wait-time-cycles is at least 6 clock cycles of the slower clock between |
| * the register clock and the 1588 clock. The 1588 ts_clk is fixed to 25Mhz, |
| * register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns |
| * (40ns * 6). |
| */ |
| #define FEC_QUIRK_BUG_CAPTURE (1 << 10) |
| |
| struct fec_enet_priv_tx_q { |
| int index; |
| unsigned char *tx_bounce[TX_RING_SIZE]; |
| struct sk_buff *tx_skbuff[TX_RING_SIZE]; |
| |
| dma_addr_t bd_dma; |
| struct bufdesc *tx_bd_base; |
| uint tx_ring_size; |
| |
| unsigned short tx_stop_threshold; |
| unsigned short tx_wake_threshold; |
| |
| struct bufdesc *cur_tx; |
| struct bufdesc *dirty_tx; |
| char *tso_hdrs; |
| dma_addr_t tso_hdrs_dma; |
| }; |
| |
| struct fec_enet_priv_rx_q { |
| int index; |
| struct sk_buff *rx_skbuff[RX_RING_SIZE]; |
| |
| dma_addr_t bd_dma; |
| struct bufdesc *rx_bd_base; |
| uint rx_ring_size; |
| |
| struct bufdesc *cur_rx; |
| }; |
| |
| /* The FEC buffer descriptors track the ring buffers. The rx_bd_base and |
| * tx_bd_base always point to the base of the buffer descriptors. The |
| * cur_rx and cur_tx point to the currently available buffer. |
| * The dirty_tx tracks the current buffer that is being sent by the |
| * controller. The cur_tx and dirty_tx are equal under both completely |
| * empty and completely full conditions. The empty/ready indicator in |
| * the buffer descriptor determines the actual condition. |
| */ |
| struct fec_enet_private { |
| /* Hardware registers of the FEC device */ |
| void __iomem *hwp; |
| |
| struct net_device *netdev; |
| |
| struct clk *clk_ipg; |
| struct clk *clk_ahb; |
| struct clk *clk_ref; |
| struct clk *clk_enet_out; |
| struct clk *clk_ptp; |
| |
| bool ptp_clk_on; |
| struct mutex ptp_clk_mutex; |
| unsigned int num_tx_queues; |
| unsigned int num_rx_queues; |
| |
| /* The saved address of a sent-in-place packet/buffer, for skfree(). */ |
| struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS]; |
| struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS]; |
| |
| unsigned int total_tx_ring_size; |
| unsigned int total_rx_ring_size; |
| |
| unsigned long work_tx; |
| unsigned long work_rx; |
| unsigned long work_ts; |
| unsigned long work_mdio; |
| |
| unsigned short bufdesc_size; |
| |
| struct platform_device *pdev; |
| |
| int dev_id; |
| |
| /* Phylib and MDIO interface */ |
| struct mii_bus *mii_bus; |
| struct phy_device *phy_dev; |
| int mii_timeout; |
| uint phy_speed; |
| phy_interface_t phy_interface; |
| struct device_node *phy_node; |
| int link; |
| int full_duplex; |
| int speed; |
| struct completion mdio_done; |
| int irq[FEC_IRQ_NUM]; |
| int bufdesc_ex; |
| int pause_flag; |
| |
| struct napi_struct napi; |
| int csum_flags; |
| |
| struct work_struct tx_timeout_work; |
| |
| struct ptp_clock *ptp_clock; |
| struct ptp_clock_info ptp_caps; |
| unsigned long last_overflow_check; |
| spinlock_t tmreg_lock; |
| struct cyclecounter cc; |
| struct timecounter tc; |
| int rx_hwtstamp_filter; |
| u32 base_incval; |
| u32 cycle_speed; |
| int hwts_rx_en; |
| int hwts_tx_en; |
| struct delayed_work time_keep; |
| struct regulator *reg_phy; |
| |
| unsigned int tx_align; |
| unsigned int rx_align; |
| |
| /* hw interrupt coalesce */ |
| unsigned int rx_pkts_itr; |
| unsigned int rx_time_itr; |
| unsigned int tx_pkts_itr; |
| unsigned int tx_time_itr; |
| unsigned int itr_clk_rate; |
| |
| u32 rx_copybreak; |
| |
| /* ptp clock period in ns*/ |
| unsigned int ptp_inc; |
| |
| /* pps */ |
| int pps_channel; |
| unsigned int reload_period; |
| int pps_enable; |
| unsigned int next_counter; |
| }; |
| |
| void fec_ptp_init(struct platform_device *pdev); |
| void fec_ptp_start_cyclecounter(struct net_device *ndev); |
| int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr); |
| int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr); |
| uint fec_ptp_check_pps_event(struct fec_enet_private *fep); |
| |
| /****************************************************************************/ |
| #endif /* FEC_H */ |