ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX
Provide different pair of accessors for accessing SSI registers on
PowerPC and ARM/IMX, so that fsl_ssi driver can be built on both
architectures.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 2eb407f..db9a734 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -11,11 +11,14 @@
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <sound/core.h>
@@ -26,6 +29,25 @@
#include "fsl_ssi.h"
+#ifdef PPC
+#define read_ssi(addr) in_be32(addr)
+#define write_ssi(val, addr) out_be32(addr, val)
+#define write_ssi_mask(addr, clear, set) clrsetbits_be32(addr, clear, set)
+#elif defined ARM
+#define read_ssi(addr) readl(addr)
+#define write_ssi(val, addr) writel(val, addr)
+/*
+ * FIXME: Proper locking should be added at write_ssi_mask caller level
+ * to ensure this register read/modify/write sequence is race free.
+ */
+static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set)
+{
+ u32 val = readl(addr);
+ val = (val & ~clear) | set;
+ writel(val, addr);
+}
+#endif
+
/**
* FSLSSI_I2S_RATES: sample rates supported by the I2S
*
@@ -145,7 +167,7 @@
were interrupted for. We mask it with the Interrupt Enable register
so that we only check for events that we're interested in.
*/
- sisr = in_be32(&ssi->sisr) & SIER_FLAGS;
+ sisr = read_ssi(&ssi->sisr) & SIER_FLAGS;
if (sisr & CCSR_SSI_SISR_RFRC) {
ssi_private->stats.rfrc++;
@@ -260,7 +282,7 @@
/* Clear the bits that we set */
if (sisr2)
- out_be32(&ssi->sisr, sisr2);
+ write_ssi(sisr2, &ssi->sisr);
return ret;
}
@@ -295,7 +317,7 @@
* SSI needs to be disabled before updating the registers we set
* here.
*/
- clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
/*
* Program the SSI into I2S Slave Non-Network Synchronous mode.
@@ -303,20 +325,18 @@
*
* FIXME: Little-endian samples require a different shift dir
*/
- clrsetbits_be32(&ssi->scr,
+ write_ssi_mask(&ssi->scr,
CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE
| (synchronous ? CCSR_SSI_SCR_SYN : 0));
- out_be32(&ssi->stcr,
- CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
+ write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
- CCSR_SSI_STCR_TSCKP);
+ CCSR_SSI_STCR_TSCKP, &ssi->stcr);
- out_be32(&ssi->srcr,
- CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
+ write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
- CCSR_SSI_SRCR_RSCKP);
+ CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
/*
* The DC and PM bits are only used if the SSI is the clock
@@ -324,7 +344,7 @@
*/
/* Enable the interrupts and DMA requests */
- out_be32(&ssi->sier, SIER_FLAGS);
+ write_ssi(SIER_FLAGS, &ssi->sier);
/*
* Set the watermark for transmit FIFI 0 and receive FIFO 0. We
@@ -339,9 +359,9 @@
* make this value larger (and maybe we should), but this way
* data will be written to memory as soon as it's available.
*/
- out_be32(&ssi->sfcsr,
- CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
- CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2));
+ write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
+ CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2),
+ &ssi->sfcsr);
/*
* We keep the SSI disabled because if we enable it, then the
@@ -417,7 +437,7 @@
unsigned int sample_size =
snd_pcm_format_width(params_format(hw_params));
u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
- int enabled = in_be32(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
+ int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
/*
* If we're in synchronous mode, and the SSI is already enabled,
@@ -439,9 +459,9 @@
/* In synchronous mode, the SSI uses STCCR for capture */
if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
ssi_private->cpu_dai_drv.symmetric_rates)
- clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+ write_ssi_mask(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
else
- clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+ write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
return 0;
}
@@ -466,19 +486,19 @@
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- setbits32(&ssi->scr,
+ write_ssi_mask(&ssi->scr, 0,
CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
else
- setbits32(&ssi->scr,
+ write_ssi_mask(&ssi->scr, 0,
CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- clrbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_TE, 0);
else
- clrbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_RE, 0);
break;
default:
@@ -510,7 +530,7 @@
if (!ssi_private->first_stream) {
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
- clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+ write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
}
}