drm/i915: clean up PIPECONF bpc #defines
Ilk+ somehow used #defines in near the PIPESTAT definitions, which
decently confused me. Earlier platforms called it BPP instead of
BPC. Clean this all up.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f834804..5b3020f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2648,11 +2648,11 @@
#define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */
#define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */
#define PIPECONF_CXSR_DOWNCLOCK (1<<16)
-#define PIPECONF_BPP_MASK (0x000000e0)
-#define PIPECONF_BPP_8 (0<<5)
-#define PIPECONF_BPP_10 (1<<5)
-#define PIPECONF_BPP_6 (2<<5)
-#define PIPECONF_BPP_12 (3<<5)
+#define PIPECONF_BPC_MASK (0x7 << 5)
+#define PIPECONF_8BPC (0<<5)
+#define PIPECONF_10BPC (1<<5)
+#define PIPECONF_6BPC (2<<5)
+#define PIPECONF_12BPC (3<<5)
#define PIPECONF_DITHER_EN (1<<4)
#define PIPECONF_DITHER_TYPE_MASK (0x0000000c)
#define PIPECONF_DITHER_TYPE_SP (0<<2)
@@ -2696,11 +2696,6 @@
#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
-#define PIPE_BPC_MASK (7 << 5) /* Ironlake */
-#define PIPE_8BPC (0 << 5)
-#define PIPE_10BPC (1 << 5)
-#define PIPE_6BPC (2 << 5)
-#define PIPE_12BPC (3 << 5)
#define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
#define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f02ec7b..1bb6816 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1669,8 +1669,8 @@
* make the BPC in transcoder be consistent with
* that in pipeconf reg.
*/
- val &= ~PIPE_BPC_MASK;
- val |= pipeconf_val & PIPE_BPC_MASK;
+ val &= ~PIPECONF_BPC_MASK;
+ val |= pipeconf_val & PIPECONF_BPC_MASK;
}
val &= ~TRANS_INTERLACE_MASK;
@@ -2764,7 +2764,7 @@
temp = I915_READ(reg);
temp &= ~((0x7 << 19) | (0x7 << 16));
temp |= (intel_crtc->fdi_lanes - 1) << 19;
- temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
POSTING_READ(reg);
@@ -2845,7 +2845,7 @@
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(0x7 << 16);
- temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
POSTING_READ(reg);
@@ -2876,7 +2876,7 @@
}
/* BPC in FDI rx is consistent with that in PIPECONF */
temp &= ~(0x07 << 16);
- temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp);
POSTING_READ(reg);
@@ -3115,7 +3115,7 @@
if (HAS_PCH_CPT(dev) &&
(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
- u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+ u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
@@ -4686,10 +4686,10 @@
}
/* default to 8bpc */
- pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+ pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
if (is_dp) {
if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- pipeconf |= PIPECONF_BPP_6 |
+ pipeconf |= PIPECONF_6BPC |
PIPECONF_DITHER_EN |
PIPECONF_DITHER_TYPE_SP;
}
@@ -4697,7 +4697,7 @@
if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
- pipeconf |= PIPECONF_BPP_6 |
+ pipeconf |= PIPECONF_6BPC |
PIPECONF_ENABLE |
I965_PIPECONF_ACTIVE;
}
@@ -4907,19 +4907,19 @@
val = I915_READ(PIPECONF(pipe));
- val &= ~PIPE_BPC_MASK;
+ val &= ~PIPECONF_BPC_MASK;
switch (intel_crtc->bpp) {
case 18:
- val |= PIPE_6BPC;
+ val |= PIPECONF_6BPC;
break;
case 24:
- val |= PIPE_8BPC;
+ val |= PIPECONF_8BPC;
break;
case 30:
- val |= PIPE_10BPC;
+ val |= PIPECONF_10BPC;
break;
case 36:
- val |= PIPE_12BPC;
+ val |= PIPECONF_12BPC;
break;
default:
/* Case prevented by intel_choose_pipe_bpp_dither. */