[SCSI] libfc: use rport timeout values for fcp recovery
Use the rport value for rec_tov for timeout values when
sending fcp commands. Currently, defaults are being used
which may or may not match the advertised values.
The default may cause i/o to timeout on networks that
set this value larger then the default value. To make
the timeout more configurable in the non-REC mode we
remove the FC_SCSI_ER_TIMEOUT completely allowing the
scsi-ml to do the timeout. This removes an unneeded
timer and allows the i/o timeout to be configured
using the scsi-ml knobs.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 8eb6767..a7d956a 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -57,6 +57,9 @@
#define FC_SRB_READ (1 << 1)
#define FC_SRB_WRITE (1 << 0)
+/* constant added to e_d_tov timeout to get rec_tov value */
+#define REC_TOV_CONST 1
+
/*
* The SCp.ptr should be tested and set under the scsi_pkt_queue lock
*/
@@ -126,9 +129,7 @@
/*
* Error recovery timeout values.
*/
-#define FC_SCSI_ER_TIMEOUT (10 * HZ)
#define FC_SCSI_TM_TOV (10 * HZ)
-#define FC_SCSI_REC_TOV (2 * HZ)
#define FC_HOST_RESET_TIMEOUT (30 * HZ)
#define FC_CAN_QUEUE_PERIOD (60 * HZ)
@@ -1083,6 +1084,21 @@
}
/**
+ * get_fsp_rec_tov() - Helper function to get REC_TOV
+ * @fsp: the FCP packet
+ */
+static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
+{
+ struct fc_rport *rport;
+ struct fc_rport_libfc_priv *rpriv;
+
+ rport = fsp->rport;
+ rpriv = rport->dd_data;
+
+ return rpriv->e_d_tov + REC_TOV_CONST;
+}
+
+/**
* fc_fcp_cmd_send() - Send a FCP command
* @lport: The local port to send the command on
* @fsp: The FCP packet the command is on
@@ -1099,6 +1115,7 @@
struct fc_rport_libfc_priv *rpriv;
const size_t len = sizeof(fsp->cdb_cmd);
int rc = 0;
+ unsigned int rec_tov;
if (fc_fcp_lock_pkt(fsp))
return 0;
@@ -1129,10 +1146,12 @@
fsp->seq_ptr = seq;
fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
+ rec_tov = get_fsp_rec_tov(fsp);
+
setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
- fc_fcp_timer_set(fsp,
- (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
- FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
+
+ if (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED)
+ fc_fcp_timer_set(fsp, rec_tov);
unlock:
fc_fcp_unlock_pkt(fsp);
return rc;
@@ -1207,13 +1226,16 @@
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
struct fc_lport *lport = fsp->lp;
+ unsigned int rec_tov;
+
if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
return;
if (fc_fcp_lock_pkt(fsp))
return;
+ rec_tov = get_fsp_rec_tov(fsp);
setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
- fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+ fc_fcp_timer_set(fsp, rec_tov);
fc_fcp_unlock_pkt(fsp);
}
}
@@ -1351,9 +1373,6 @@
if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
fc_fcp_rec(fsp);
- else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
- jiffies))
- fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
else if (fsp->state & FC_SRB_RCV_STATUS)
fc_fcp_complete_locked(fsp);
else
@@ -1373,6 +1392,7 @@
struct fc_frame *fp;
struct fc_rport *rport;
struct fc_rport_libfc_priv *rpriv;
+ unsigned int rec_tov;
lport = fsp->lp;
rport = fsp->rport;
@@ -1383,6 +1403,9 @@
fc_fcp_complete_locked(fsp);
return;
}
+
+ rec_tov = get_fsp_rec_tov(fsp);
+
fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
if (!fp)
goto retry;
@@ -1393,13 +1416,13 @@
FC_FCTL_REQ, 0);
if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
fc_fcp_rec_resp, fsp,
- jiffies_to_msecs(FC_SCSI_REC_TOV))) {
+ jiffies_to_msecs(rec_tov))) {
fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */
return;
}
retry:
if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
- fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+ fc_fcp_timer_set(fsp, rec_tov);
else
fc_fcp_recovery(fsp, FC_TIMED_OUT);
}
@@ -1455,7 +1478,6 @@
* making progress.
*/
rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
- fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
break;
case ELS_RJT_LOGIC:
case ELS_RJT_UNAB:
@@ -1508,12 +1530,12 @@
}
fc_fcp_srr(fsp, r_ctl, offset);
} else if (e_stat & ESB_ST_SEQ_INIT) {
-
+ unsigned int rec_tov = get_fsp_rec_tov(fsp);
/*
* The remote port has the initiative, so just
* keep waiting for it to complete.
*/
- fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+ fc_fcp_timer_set(fsp, rec_tov);
} else {
/*
@@ -1626,6 +1648,7 @@
struct fcp_srr *srr;
struct fc_frame *fp;
u8 cdb_op;
+ unsigned int rec_tov;
rport = fsp->rport;
rpriv = rport->dd_data;
@@ -1650,8 +1673,9 @@
rpriv->local_port->port_id, FC_TYPE_FCP,
FC_FCTL_REQ, 0);
+ rec_tov = get_fsp_rec_tov(fsp);
seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
- fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
+ fsp, jiffies_to_msecs(rec_tov));
if (!seq)
goto retry;
@@ -1675,6 +1699,7 @@
{
struct fc_fcp_pkt *fsp = arg;
struct fc_frame_header *fh;
+ unsigned int rec_tov;
if (IS_ERR(fp)) {
fc_fcp_srr_error(fsp, fp);
@@ -1701,7 +1726,8 @@
switch (fc_frame_payload_op(fp)) {
case ELS_LS_ACC:
fsp->recov_retry = 0;
- fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+ rec_tov = get_fsp_rec_tov(fsp);
+ fc_fcp_timer_set(fsp, rec_tov);
break;
case ELS_LS_RJT:
default: