arch/arm/mach-ux500/board-mop500-regulators.c - kernel/msm-4.19 - Gitiles

 /*
  * Copyright (C) ST-Ericsson SA 2010
  *
  * License Terms: GNU General Public License v2
  *
  * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
  *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
  *
  * MOP500 board specific initialization for regulators
  */
 #include <linux/kernel.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
 #include <mach/id.h> /* to identify older boards for fixes */
 #include "board-mop500-regulators.h"

 static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
        REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
 };

 struct regulator_init_data gpio_en_3v3_regulator = {
        .constraints = {
                .name = "EN-3V3",
                .min_uV = 3300000,
                .max_uV = 3300000,
                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
        },
        .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
        .consumer_supplies = gpio_en_3v3_consumers,
 };

 /*
  * TPS61052 regulator
  */
 static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
 	/*
 	 * Boost converter supply to raise voltage on audio speaker, this
 	 * is actually connected to three pins, VInVhfL (left amplifier)
 	 * VInVhfR (right amplifier) and VIntDClassInt - all three must
 	 * be connected to the same voltage.
 	 */
 	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
 };

 struct regulator_init_data tps61052_regulator = {
 	.constraints = {
 		.name = "vaudio-hf",
 		.min_uV = 4500000,
 		.max_uV = 4500000,
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
 	.consumer_supplies = tps61052_vaudio_consumers,
 };

 static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
 	/* Main display, u8500 R3 uib */
 	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
 	/* Main display, u8500 uib and ST uib */
 	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
 	/* Secondary display, ST uib */
 	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
 	/* SFH7741 proximity sensor */
 	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
 	/* BH1780GLS ambient light sensor */
 	REGULATOR_SUPPLY("vcc", "2-0029"),
 	/* lsm303dlh accelerometer */
 	REGULATOR_SUPPLY("vdd", "3-0018"),
 	/* lsm303dlhc accelerometer */
 	REGULATOR_SUPPLY("vdd", "2-0019"),
 	/* lsm303dlh magnetometer */
 	REGULATOR_SUPPLY("vdd", "2-001e"),
 	/* Rohm BU21013 Touchscreen devices */
 	REGULATOR_SUPPLY("avdd", "3-005c"),
 	REGULATOR_SUPPLY("avdd", "3-005d"),
 	/* Synaptics RMI4 Touchscreen device */
 	REGULATOR_SUPPLY("vdd", "3-004b"),
 	/* L3G4200D Gyroscope device */
 	REGULATOR_SUPPLY("vdd", "2-0068"),
 	/* Ambient light sensor device */
 	REGULATOR_SUPPLY("vdd", "3-0029"),
 	/* Pressure sensor device */
 	REGULATOR_SUPPLY("vdd", "2-005c"),
 	/* Cypress TrueTouch Touchscreen device */
 	REGULATOR_SUPPLY("vcpin", "spi8.0"),
 	/* Camera device */
 	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
 };

 static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
 	/* On-board eMMC power */
 	REGULATOR_SUPPLY("vmmc", "sdi4"),
 	/* AB8500 audio codec */
 	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
 };

 static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
 	/* External MMC slot power */
 	REGULATOR_SUPPLY("vmmc", "sdi0"),
 };

 static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 	/* TV-out DENC supply */
 	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
 	/* Internal general-purpose ADC */
 	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
 };

 static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
 	/* AB8500 audio-codec main supply */
 	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
 };

 static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
 	/* AB8500 audio-codec Mic1 supply */
 	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
 };

 static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
 	/* AB8500 audio-codec Mic2 supply */
 	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
 };

 static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
 	/* AB8500 audio-codec DMic supply */
 	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
 };

 static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
 	/* SoC core supply, no device */
 	REGULATOR_SUPPLY("v-intcore", NULL),
 	/* USB Transceiver */
 	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
 };

 static struct regulator_consumer_supply ab8500_vana_consumers[] = {
 	/* External displays, connector on board, 1v8 power supply */
 	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
 };

 /* ab8500 regulator register initialization */
 static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
 	/*
 	 * VanaRequestCtrl          = HP/LP depending on VxRequest
 	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xf0, 0x00),
 	/*
 	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
 	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
 	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
 	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
 	/*
 	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
 	 * SwHPReq                  = Control through SWValid disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
 	/*
 	 * VanaSysClkReq1HPValid    = disabled
 	 * Vaux1SysClkReq1HPValid   = disabled
 	 * Vaux2SysClkReq1HPValid   = disabled
 	 * Vaux3SysClkReq1HPValid   = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
 	/*
 	 * VextSupply1SysClkReq1HPValid = disabled
 	 * VextSupply2SysClkReq1HPValid = disabled
 	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
 	/*
 	 * VanaHwHPReq1Valid        = disabled
 	 * Vaux1HwHPreq1Valid       = disabled
 	 * Vaux2HwHPReq1Valid       = disabled
 	 * Vaux3HwHPReqValid        = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq1Valid = disabled
 	 * VextSupply2HwHPReq1Valid = disabled
 	 * VextSupply3HwHPReq1Valid = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
 	/*
 	 * VanaHwHPReq2Valid        = disabled
 	 * Vaux1HwHPReq2Valid       = disabled
 	 * Vaux2HwHPReq2Valid       = disabled
 	 * Vaux3HwHPReq2Valid       = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq2Valid = disabled
 	 * VextSupply2HwHPReq2Valid = disabled
 	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
 	/*
 	 * VanaSwHPReqValid         = disabled
 	 * Vaux1SwHPReqValid        = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
 	/*
 	 * Vaux2SwHPReqValid        = disabled
 	 * Vaux3SwHPReqValid        = disabled
 	 * VextSupply1SwHPReqValid  = disabled
 	 * VextSupply2SwHPReqValid  = disabled
 	 * VextSupply3SwHPReqValid  = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
 	/*
 	 * SysClkReq2Valid1         = SysClkReq2 controlled
 	 * SysClkReq3Valid1         = disabled
 	 * SysClkReq4Valid1         = SysClkReq4 controlled
 	 * SysClkReq5Valid1         = disabled
 	 * SysClkReq6Valid1         = SysClkReq6 controlled
 	 * SysClkReq7Valid1         = disabled
 	 * SysClkReq8Valid1         = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
 	/*
 	 * SysClkReq2Valid2         = disabled
 	 * SysClkReq3Valid2         = disabled
 	 * SysClkReq4Valid2         = disabled
 	 * SysClkReq5Valid2         = disabled
 	 * SysClkReq6Valid2         = SysClkReq6 controlled
 	 * SysClkReq7Valid2         = disabled
 	 * SysClkReq8Valid2         = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
 	/*
 	 * VTVoutEna                = disabled
 	 * Vintcore12Ena            = disabled
 	 * Vintcore12Sel            = 1.25 V
 	 * Vintcore12LP             = inactive (HP)
 	 * VTVoutLP                 = inactive (HP)
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
 	/*
 	 * VaudioEna                = disabled
 	 * VdmicEna                 = disabled
 	 * Vamic1Ena                = disabled
 	 * Vamic2Ena                = disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
 	/*
 	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
 	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
 	/*
 	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
 	 * VanaRegu                 = force off
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
 	/*
 	 * VrefDDREna               = disabled
 	 * VrefDDRSleepMode         = inactive (no pulldown)
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
 	/*
 	 * VextSupply1Regu          = force LP
 	 * VextSupply2Regu          = force OFF
 	 * VextSupply3Regu          = force HP (-> STBB2=LP and TPS=LP)
 	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
 	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x13),
 	/*
 	 * Vaux1Regu                = force HP
 	 * Vaux2Regu                = force off
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
 	/*
 	 * Vaux3Regu                = force off
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x03, 0x00),
 	/*
 	 * Vaux1Sel                 = 2.5 V
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x08),
 	/*
 	 * Vaux2Sel                 = 2.9 V
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
 	/*
 	 * Vaux3Sel                 = 2.91 V
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
 	/*
 	 * VextSupply12LP           = disabled (no LP)
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
 	/*
 	 * Vaux1Disch               = short discharge time
 	 * Vaux2Disch               = short discharge time
 	 * Vaux3Disch               = short discharge time
 	 * Vintcore12Disch          = short discharge time
 	 * VTVoutDisch              = short discharge time
 	 * VaudioDisch              = short discharge time
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
 	/*
 	 * VanaDisch                = short discharge time
 	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
 	 * VdmicDisch               = short discharge time
 	 */
 	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
 };

 /* AB8500 regulators */
 static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 	/* supplies to the display/camera */
 	[AB8500_LDO_AUX1] = {
 		.constraints = {
 			.name = "V-DISPLAY",
 			.min_uV = 2500000,
 			.max_uV = 2900000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 			.boot_on = 1, /* display is on at boot */
 			/*
 			 * This voltage cannot be disabled right now because
 			 * it is somehow affecting the external MMC
 			 * functionality, though that typically will use
 			 * AUX3.
 			 */
 			.always_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
 		.consumer_supplies = ab8500_vaux1_consumers,
 	},
 	/* supplies to the on-board eMMC */
 	[AB8500_LDO_AUX2] = {
 		.constraints = {
 			.name = "V-eMMC1",
 			.min_uV = 1100000,
 			.max_uV = 3300000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
 		.consumer_supplies = ab8500_vaux2_consumers,
 	},
 	/* supply for VAUX3, supplies to SDcard slots */
 	[AB8500_LDO_AUX3] = {
 		.constraints = {
 			.name = "V-MMC-SD",
 			.min_uV = 1100000,
 			.max_uV = 3300000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
 		.consumer_supplies = ab8500_vaux3_consumers,
 	},
 	/* supply for tvout, gpadc, TVOUT LDO */
 	[AB8500_LDO_TVOUT] = {
 		.constraints = {
 			.name = "V-TVOUT",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
 		.consumer_supplies = ab8500_vtvout_consumers,
 	},
 	/* supply for ab8500-vaudio, VAUDIO LDO */
 	[AB8500_LDO_AUDIO] = {
 		.constraints = {
 			.name = "V-AUD",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
 		.consumer_supplies = ab8500_vaud_consumers,
 	},
 	/* supply for v-anamic1 VAMic1-LDO */
 	[AB8500_LDO_ANAMIC1] = {
 		.constraints = {
 			.name = "V-AMIC1",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
 		.consumer_supplies = ab8500_vamic1_consumers,
 	},
 	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
 	[AB8500_LDO_ANAMIC2] = {
 		.constraints = {
 			.name = "V-AMIC2",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
 		.consumer_supplies = ab8500_vamic2_consumers,
 	},
 	/* supply for v-dmic, VDMIC LDO */
 	[AB8500_LDO_DMIC] = {
 		.constraints = {
 			.name = "V-DMIC",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
 		.consumer_supplies = ab8500_vdmic_consumers,
 	},
 	/* supply for v-intcore12, VINTCORE12 LDO */
 	[AB8500_LDO_INTCORE] = {
 		.constraints = {
 			.name = "V-INTCORE",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
 		.consumer_supplies = ab8500_vintcore_consumers,
 	},
 	/* supply for U8500 CSI/DSI, VANA LDO */
 	[AB8500_LDO_ANA] = {
 		.constraints = {
 			.name = "V-CSI/DSI",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
 		.consumer_supplies = ab8500_vana_consumers,
 	},
 };

 /* supply for VextSupply3 */
 static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
 	/* SIM supply for 3 V SIM cards */
 	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
 };

 /* extended configuration for VextSupply2, only used for HREFP_V20 boards */
 static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
 	.hwreq = true,
 };

 /*
  * AB8500 external regulators
  */
 static struct regulator_init_data ab8500_ext_regulators[] = {
 	/* fixed Vbat supplies VSMPS1_EXT_1V8 */
 	[AB8500_EXT_SUPPLY1] = {
 		.constraints = {
 			.name = "ab8500-ext-supply1",
 			.min_uV = 1800000,
 			.max_uV = 1800000,
 			.initial_mode = REGULATOR_MODE_IDLE,
 			.boot_on = 1,
 			.always_on = 1,
 		},
 	},
 	/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
 	[AB8500_EXT_SUPPLY2] = {
 		.constraints = {
 			.name = "ab8500-ext-supply2",
 			.min_uV = 1360000,
 			.max_uV = 1360000,
 		},
 	},
 	/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
 	[AB8500_EXT_SUPPLY3] = {
 		.constraints = {
 			.name = "ab8500-ext-supply3",
 			.min_uV = 3400000,
 			.max_uV = 3400000,
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 			.boot_on = 1,
 		},
 		.num_consumer_supplies =
 			ARRAY_SIZE(ab8500_ext_supply3_consumers),
 		.consumer_supplies = ab8500_ext_supply3_consumers,
 	},
 };

 struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
 	.reg_init               = ab8500_reg_init,
 	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
 	.regulator              = ab8500_regulators,
 	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
 	.ext_regulator          = ab8500_ext_regulators,
 	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
 };

 static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
 {
 	int i;

 	for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
 		if (ab8500_reg_init[i].id == id) {
 			u8 initval = ab8500_reg_init[i].value;
 			initval = (initval & ~mask) | (value & mask);
 			ab8500_reg_init[i].value = initval;

 			BUG_ON(mask & ~ab8500_reg_init[i].mask);
 			return;
 		}
 	}

 	BUG_ON(1);
 }

 void mop500_regulator_init(void)
 {
 	struct regulator_init_data *regulator;

 	/*
 	 * Handle VextSupply1 on older boards than HREFP_V22_V1x
 	 * (turn off in suspend)
 	 */
 	if (cpu_is_u8500v20() || cpu_is_u8500v21()) {
 		/* disable VextSupply1 in suspend */
 		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY1];
 		regulator->constraints.state_mem.disabled = 1;
 		regulator->constraints.state_standby.disabled = 1;
 	}

 	/*
 	 * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
 	 * all HREFP_V20 boards)
 	 */
 	if (cpu_is_u8500v20()) {
 		/* VextSupply2RequestCtrl =  HP/OFF depending on VxRequest */
 		ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);

 		/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
 		ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
 			0x20, 0x20);

 		/* VextSupply2 = force HP at initialization */
 		ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);

 		/* enable VextSupply2 during platform active */
 		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
 		regulator->constraints.always_on = 1;

 		/* disable VextSupply2 in suspend */
 		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
 		regulator->constraints.state_mem.disabled = 1;
 		regulator->constraints.state_standby.disabled = 1;

 		/* enable VextSupply2 HW control (used in suspend) */
 		regulator->driver_data = (void *)&ab8500_ext_supply2;
 	}
 }
	/*
	* Copyright (C) ST-Ericsson SA 2010
	*
	* License Terms: GNU General Public License v2
	*
	* Authors: Sundar Iyer <sundar.iyer@stericsson.com>
	* Bengt Jonsson <bengt.g.jonsson@stericsson.com>
	*
	* MOP500 board specific initialization for regulators
	*/
	#include <linux/kernel.h>
	#include <linux/regulator/machine.h>
	#include <linux/regulator/ab8500.h>
	#include <mach/id.h> /* to identify older boards for fixes */
	#include "board-mop500-regulators.h"

	static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
	};

	struct regulator_init_data gpio_en_3v3_regulator = {
	.constraints = {
	.name = "EN-3V3",
	.min_uV = 3300000,
	.max_uV = 3300000,
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
	.consumer_supplies = gpio_en_3v3_consumers,
	};

	/*
	* TPS61052 regulator
	*/
	static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
	/*
	* Boost converter supply to raise voltage on audio speaker, this
	* is actually connected to three pins, VInVhfL (left amplifier)
	* VInVhfR (right amplifier) and VIntDClassInt - all three must
	* be connected to the same voltage.
	*/
	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
	};

	struct regulator_init_data tps61052_regulator = {
	.constraints = {
	.name = "vaudio-hf",
	.min_uV = 4500000,
	.max_uV = 4500000,
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
	.consumer_supplies = tps61052_vaudio_consumers,
	};

	static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
	/* Main display, u8500 R3 uib */
	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
	/* Main display, u8500 uib and ST uib */
	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
	/* Secondary display, ST uib */
	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
	/* SFH7741 proximity sensor */
	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
	/* BH1780GLS ambient light sensor */
	REGULATOR_SUPPLY("vcc", "2-0029"),
	/* lsm303dlh accelerometer */
	REGULATOR_SUPPLY("vdd", "3-0018"),
	/* lsm303dlhc accelerometer */
	REGULATOR_SUPPLY("vdd", "2-0019"),
	/* lsm303dlh magnetometer */
	REGULATOR_SUPPLY("vdd", "2-001e"),
	/* Rohm BU21013 Touchscreen devices */
	REGULATOR_SUPPLY("avdd", "3-005c"),
	REGULATOR_SUPPLY("avdd", "3-005d"),
	/* Synaptics RMI4 Touchscreen device */
	REGULATOR_SUPPLY("vdd", "3-004b"),
	/* L3G4200D Gyroscope device */
	REGULATOR_SUPPLY("vdd", "2-0068"),
	/* Ambient light sensor device */
	REGULATOR_SUPPLY("vdd", "3-0029"),
	/* Pressure sensor device */
	REGULATOR_SUPPLY("vdd", "2-005c"),
	/* Cypress TrueTouch Touchscreen device */
	REGULATOR_SUPPLY("vcpin", "spi8.0"),
	/* Camera device */
	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
	};

	static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
	/* On-board eMMC power */
	REGULATOR_SUPPLY("vmmc", "sdi4"),
	/* AB8500 audio codec */
	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
	};

	static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
	/* External MMC slot power */
	REGULATOR_SUPPLY("vmmc", "sdi0"),
	};

	static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
	/* TV-out DENC supply */
	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
	/* Internal general-purpose ADC */
	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
	};

	static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
	/* AB8500 audio-codec main supply */
	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
	};

	static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
	/* AB8500 audio-codec Mic1 supply */
	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
	};

	static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
	/* AB8500 audio-codec Mic2 supply */
	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
	};

	static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
	/* AB8500 audio-codec DMic supply */
	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
	};

	static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
	/* SoC core supply, no device */
	REGULATOR_SUPPLY("v-intcore", NULL),
	/* USB Transceiver */
	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
	};

	static struct regulator_consumer_supply ab8500_vana_consumers[] = {
	/* External displays, connector on board, 1v8 power supply */
	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
	};

	/* ab8500 regulator register initialization */
	static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
	/*
	* VanaRequestCtrl = HP/LP depending on VxRequest
	* VextSupply1RequestCtrl = HP/LP depending on VxRequest
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
	/*
	* VextSupply2RequestCtrl = HP/LP depending on VxRequest
	* VextSupply3RequestCtrl = HP/LP depending on VxRequest
	* Vaux1RequestCtrl = HP/LP depending on VxRequest
	* Vaux2RequestCtrl = HP/LP depending on VxRequest
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
	/*
	* Vaux3RequestCtrl = HP/LP depending on VxRequest
	* SwHPReq = Control through SWValid disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
	/*
	* VanaSysClkReq1HPValid = disabled
	* Vaux1SysClkReq1HPValid = disabled
	* Vaux2SysClkReq1HPValid = disabled
	* Vaux3SysClkReq1HPValid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
	/*
	* VextSupply1SysClkReq1HPValid = disabled
	* VextSupply2SysClkReq1HPValid = disabled
	* VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
	/*
	* VanaHwHPReq1Valid = disabled
	* Vaux1HwHPreq1Valid = disabled
	* Vaux2HwHPReq1Valid = disabled
	* Vaux3HwHPReqValid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
	/*
	* VextSupply1HwHPReq1Valid = disabled
	* VextSupply2HwHPReq1Valid = disabled
	* VextSupply3HwHPReq1Valid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
	/*
	* VanaHwHPReq2Valid = disabled
	* Vaux1HwHPReq2Valid = disabled
	* Vaux2HwHPReq2Valid = disabled
	* Vaux3HwHPReq2Valid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
	/*
	* VextSupply1HwHPReq2Valid = disabled
	* VextSupply2HwHPReq2Valid = disabled
	* VextSupply3HwHPReq2Valid = HWReq2 controlled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
	/*
	* VanaSwHPReqValid = disabled
	* Vaux1SwHPReqValid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
	/*
	* Vaux2SwHPReqValid = disabled
	* Vaux3SwHPReqValid = disabled
	* VextSupply1SwHPReqValid = disabled
	* VextSupply2SwHPReqValid = disabled
	* VextSupply3SwHPReqValid = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
	/*
	* SysClkReq2Valid1 = SysClkReq2 controlled
	* SysClkReq3Valid1 = disabled
	* SysClkReq4Valid1 = SysClkReq4 controlled
	* SysClkReq5Valid1 = disabled
	* SysClkReq6Valid1 = SysClkReq6 controlled
	* SysClkReq7Valid1 = disabled
	* SysClkReq8Valid1 = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
	/*
	* SysClkReq2Valid2 = disabled
	* SysClkReq3Valid2 = disabled
	* SysClkReq4Valid2 = disabled
	* SysClkReq5Valid2 = disabled
	* SysClkReq6Valid2 = SysClkReq6 controlled
	* SysClkReq7Valid2 = disabled
	* SysClkReq8Valid2 = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
	/*
	* VTVoutEna = disabled
	* Vintcore12Ena = disabled
	* Vintcore12Sel = 1.25 V
	* Vintcore12LP = inactive (HP)
	* VTVoutLP = inactive (HP)
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
	/*
	* VaudioEna = disabled
	* VdmicEna = disabled
	* Vamic1Ena = disabled
	* Vamic2Ena = disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
	/*
	* Vamic1_dzout = high-Z when Vamic1 is disabled
	* Vamic2_dzout = high-Z when Vamic2 is disabled
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
	/*
	* VPll = Hw controlled (NOTE! PRCMU bits)
	* VanaRegu = force off
	*/
	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
	/*
	* VrefDDREna = disabled
	* VrefDDRSleepMode = inactive (no pulldown)
	*/
	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
	/*
	* VextSupply1Regu = force LP
	* VextSupply2Regu = force OFF
	* VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
	* ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
	* ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
	*/
	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
	/*
	* Vaux1Regu = force HP
	* Vaux2Regu = force off
	*/
	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
	/*
	* Vaux3Regu = force off
	*/
	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
	/*
	* Vaux1Sel = 2.5 V
	*/
	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x08),
	/*
	* Vaux2Sel = 2.9 V
	*/
	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
	/*
	* Vaux3Sel = 2.91 V
	*/
	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
	/*
	* VextSupply12LP = disabled (no LP)
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
	/*
	* Vaux1Disch = short discharge time
	* Vaux2Disch = short discharge time
	* Vaux3Disch = short discharge time
	* Vintcore12Disch = short discharge time
	* VTVoutDisch = short discharge time
	* VaudioDisch = short discharge time
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
	/*
	* VanaDisch = short discharge time
	* VdmicPullDownEna = pulldown disabled when Vdmic is disabled
	* VdmicDisch = short discharge time
	*/
	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
	};

	/* AB8500 regulators */
	static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
	/* supplies to the display/camera */
	[AB8500_LDO_AUX1] = {
	.constraints = {
	.name = "V-DISPLAY",
	.min_uV = 2500000,
	.max_uV = 2900000,
	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS,
	.boot_on = 1, /* display is on at boot */
	/*
	* This voltage cannot be disabled right now because
	* it is somehow affecting the external MMC
	* functionality, though that typically will use
	* AUX3.
	*/
	.always_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
	.consumer_supplies = ab8500_vaux1_consumers,
	},
	/* supplies to the on-board eMMC */
	[AB8500_LDO_AUX2] = {
	.constraints = {
	.name = "V-eMMC1",
	.min_uV = 1100000,
	.max_uV = 3300000,
	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
	.consumer_supplies = ab8500_vaux2_consumers,
	},
	/* supply for VAUX3, supplies to SDcard slots */
	[AB8500_LDO_AUX3] = {
	.constraints = {
	.name = "V-MMC-SD",
	.min_uV = 1100000,
	.max_uV = 3300000,
	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE \|
	REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
	.consumer_supplies = ab8500_vaux3_consumers,
	},
	/* supply for tvout, gpadc, TVOUT LDO */
	[AB8500_LDO_TVOUT] = {
	.constraints = {
	.name = "V-TVOUT",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
	.consumer_supplies = ab8500_vtvout_consumers,
	},
	/* supply for ab8500-vaudio, VAUDIO LDO */
	[AB8500_LDO_AUDIO] = {
	.constraints = {
	.name = "V-AUD",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
	.consumer_supplies = ab8500_vaud_consumers,
	},
	/* supply for v-anamic1 VAMic1-LDO */
	[AB8500_LDO_ANAMIC1] = {
	.constraints = {
	.name = "V-AMIC1",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
	.consumer_supplies = ab8500_vamic1_consumers,
	},
	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
	[AB8500_LDO_ANAMIC2] = {
	.constraints = {
	.name = "V-AMIC2",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
	.consumer_supplies = ab8500_vamic2_consumers,
	},
	/* supply for v-dmic, VDMIC LDO */
	[AB8500_LDO_DMIC] = {
	.constraints = {
	.name = "V-DMIC",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
	.consumer_supplies = ab8500_vdmic_consumers,
	},
	/* supply for v-intcore12, VINTCORE12 LDO */
	[AB8500_LDO_INTCORE] = {
	.constraints = {
	.name = "V-INTCORE",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
	.consumer_supplies = ab8500_vintcore_consumers,
	},
	/* supply for U8500 CSI/DSI, VANA LDO */
	[AB8500_LDO_ANA] = {
	.constraints = {
	.name = "V-CSI/DSI",
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
	.consumer_supplies = ab8500_vana_consumers,
	},
	};

	/* supply for VextSupply3 */
	static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
	/* SIM supply for 3 V SIM cards */
	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
	};

	/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
	static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
	.hwreq = true,
	};

	/*
	* AB8500 external regulators
	*/
	static struct regulator_init_data ab8500_ext_regulators[] = {
	/* fixed Vbat supplies VSMPS1_EXT_1V8 */
	[AB8500_EXT_SUPPLY1] = {
	.constraints = {
	.name = "ab8500-ext-supply1",
	.min_uV = 1800000,
	.max_uV = 1800000,
	.initial_mode = REGULATOR_MODE_IDLE,
	.boot_on = 1,
	.always_on = 1,
	},
	},
	/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
	[AB8500_EXT_SUPPLY2] = {
	.constraints = {
	.name = "ab8500-ext-supply2",
	.min_uV = 1360000,
	.max_uV = 1360000,
	},
	},
	/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
	[AB8500_EXT_SUPPLY3] = {
	.constraints = {
	.name = "ab8500-ext-supply3",
	.min_uV = 3400000,
	.max_uV = 3400000,
	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	.boot_on = 1,
	},
	.num_consumer_supplies =
	ARRAY_SIZE(ab8500_ext_supply3_consumers),
	.consumer_supplies = ab8500_ext_supply3_consumers,
	},
	};

	struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
	.reg_init = ab8500_reg_init,
	.num_reg_init = ARRAY_SIZE(ab8500_reg_init),
	.regulator = ab8500_regulators,
	.num_regulator = ARRAY_SIZE(ab8500_regulators),
	.ext_regulator = ab8500_ext_regulators,
	.num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
	};

	static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
	{
	int i;

	for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
	if (ab8500_reg_init[i].id == id) {
	u8 initval = ab8500_reg_init[i].value;
	initval = (initval & ~mask) \| (value & mask);
	ab8500_reg_init[i].value = initval;

	BUG_ON(mask & ~ab8500_reg_init[i].mask);
	return;
	}
	}

	BUG_ON(1);
	}

	void mop500_regulator_init(void)
	{
	struct regulator_init_data *regulator;

	/*
	* Handle VextSupply1 on older boards than HREFP_V22_V1x
	* (turn off in suspend)
	*/
	if (cpu_is_u8500v20() \|\| cpu_is_u8500v21()) {
	/* disable VextSupply1 in suspend */
	regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY1];
	regulator->constraints.state_mem.disabled = 1;
	regulator->constraints.state_standby.disabled = 1;
	}

	/*
	* Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
	* all HREFP_V20 boards)
	*/
	if (cpu_is_u8500v20()) {
	/* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */
	ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);

	/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
	ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
	0x20, 0x20);

	/* VextSupply2 = force HP at initialization */
	ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);

	/* enable VextSupply2 during platform active */
	regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
	regulator->constraints.always_on = 1;

	/* disable VextSupply2 in suspend */
	regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
	regulator->constraints.state_mem.disabled = 1;
	regulator->constraints.state_standby.disabled = 1;

	/* enable VextSupply2 HW control (used in suspend) */
	regulator->driver_data = (void *)&ab8500_ext_supply2;
	}
	}