[MTD NAND] Indent all of drivers/mtd/nand/*.c.
It was just too painful to deal with.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 9cf1ce7..a11354b 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -39,16 +39,16 @@
*/
#define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */
#define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */
-#define SPIA_PEDR 0x0080 /*
- * IO offset to Port E data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define SPIA_PEDDR 0x00c0 /*
- * IO offset to Port E data direction
- * register so we can control the IO
- * lines.
- */
+#define SPIA_PEDR 0x0080 /*
+ * IO offset to Port E data register
+ * where the CLE, ALE and NCE pins
+ * are wired to.
+ */
+#define SPIA_PEDDR 0x00c0 /*
+ * IO offset to Port E data direction
+ * register so we can control the IO
+ * lines.
+ */
/*
* Module stuff
@@ -69,25 +69,23 @@
*/
static const struct mtd_partition partition_info[] = {
{
- .name = "SPIA flash partition 1",
- .offset = 0,
- .size = 2*1024*1024
- },
+ .name = "SPIA flash partition 1",
+ .offset = 0,
+ .size = 2 * 1024 * 1024},
{
- .name = "SPIA flash partition 2",
- .offset = 2*1024*1024,
- .size = 6*1024*1024
- }
+ .name = "SPIA flash partition 2",
+ .offset = 2 * 1024 * 1024,
+ .size = 6 * 1024 * 1024}
};
-#define NUM_PARTITIONS 2
+#define NUM_PARTITIONS 2
/*
* hardware specific access to control-lines
*/
-static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
-
- switch(cmd){
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch (cmd) {
case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x01; break;
case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;
@@ -97,30 +95,29 @@
case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;
case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x04; break;
- }
+ }
}
/*
* Main initialization routine
*/
-int __init spia_init (void)
+int __init spia_init(void)
{
struct nand_chip *this;
/* Allocate memory for MTD device structure and private data */
- spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
- GFP_KERNEL);
+ spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!spia_mtd) {
- printk ("Unable to allocate SPIA NAND MTD device structure.\n");
+ printk("Unable to allocate SPIA NAND MTD device structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *) (&spia_mtd[1]);
+ this = (struct nand_chip *)(&spia_mtd[1]);
/* Initialize structures */
- memset((char *) spia_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
+ memset(spia_mtd, 0, sizeof(struct mtd_info));
+ memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
spia_mtd->priv = this;
@@ -129,19 +126,19 @@
* Set GPIO Port E control register so that the pins are configured
* to be outputs for controlling the NAND flash.
*/
- (*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;
+ (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07;
/* Set address of NAND IO lines */
- this->IO_ADDR_R = (void __iomem *) spia_fio_base;
- this->IO_ADDR_W = (void __iomem *) spia_fio_base;
+ this->IO_ADDR_R = (void __iomem *)spia_fio_base;
+ this->IO_ADDR_W = (void __iomem *)spia_fio_base;
/* Set address of hardware control function */
this->hwcontrol = spia_hwcontrol;
/* 15 us command delay time */
this->chip_delay = 15;
/* Scan to find existence of the device */
- if (nand_scan (spia_mtd, 1)) {
- kfree (spia_mtd);
+ if (nand_scan(spia_mtd, 1)) {
+ kfree(spia_mtd);
return -ENXIO;
}
@@ -151,20 +148,22 @@
/* Return happy */
return 0;
}
+
module_init(spia_init);
/*
* Clean up routine
*/
#ifdef MODULE
-static void __exit spia_cleanup (void)
+static void __exit spia_cleanup(void)
{
/* Release resources, unregister device */
- nand_release (spia_mtd);
+ nand_release(spia_mtd);
/* Free the MTD device structure */
- kfree (spia_mtd);
+ kfree(spia_mtd);
}
+
module_exit(spia_cleanup);
#endif