| /* |
| * DesignWare High-Definition Multimedia Interface (HDMI) driver |
| * |
| * Copyright (C) 2013-2015 Mentor Graphics Inc. |
| * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. |
| * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/irq.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/hdmi.h> |
| #include <linux/mutex.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/spinlock.h> |
| |
| #include <drm/drm_of.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_encoder_slave.h> |
| #include <drm/bridge/dw_hdmi.h> |
| |
| #include <uapi/linux/media-bus-format.h> |
| #include <uapi/linux/videodev2.h> |
| |
| #include "dw-hdmi.h" |
| #include "dw-hdmi-audio.h" |
| |
| #define DDC_SEGMENT_ADDR 0x30 |
| #define HDMI_EDID_LEN 512 |
| |
| enum hdmi_datamap { |
| RGB444_8B = 0x01, |
| RGB444_10B = 0x03, |
| RGB444_12B = 0x05, |
| RGB444_16B = 0x07, |
| YCbCr444_8B = 0x09, |
| YCbCr444_10B = 0x0B, |
| YCbCr444_12B = 0x0D, |
| YCbCr444_16B = 0x0F, |
| YCbCr422_8B = 0x16, |
| YCbCr422_10B = 0x14, |
| YCbCr422_12B = 0x12, |
| }; |
| |
| static const u16 csc_coeff_default[3][4] = { |
| { 0x2000, 0x0000, 0x0000, 0x0000 }, |
| { 0x0000, 0x2000, 0x0000, 0x0000 }, |
| { 0x0000, 0x0000, 0x2000, 0x0000 } |
| }; |
| |
| static const u16 csc_coeff_rgb_out_eitu601[3][4] = { |
| { 0x2000, 0x6926, 0x74fd, 0x010e }, |
| { 0x2000, 0x2cdd, 0x0000, 0x7e9a }, |
| { 0x2000, 0x0000, 0x38b4, 0x7e3b } |
| }; |
| |
| static const u16 csc_coeff_rgb_out_eitu709[3][4] = { |
| { 0x2000, 0x7106, 0x7a02, 0x00a7 }, |
| { 0x2000, 0x3264, 0x0000, 0x7e6d }, |
| { 0x2000, 0x0000, 0x3b61, 0x7e25 } |
| }; |
| |
| static const u16 csc_coeff_rgb_in_eitu601[3][4] = { |
| { 0x2591, 0x1322, 0x074b, 0x0000 }, |
| { 0x6535, 0x2000, 0x7acc, 0x0200 }, |
| { 0x6acd, 0x7534, 0x2000, 0x0200 } |
| }; |
| |
| static const u16 csc_coeff_rgb_in_eitu709[3][4] = { |
| { 0x2dc5, 0x0d9b, 0x049e, 0x0000 }, |
| { 0x62f0, 0x2000, 0x7d11, 0x0200 }, |
| { 0x6756, 0x78ab, 0x2000, 0x0200 } |
| }; |
| |
| struct hdmi_vmode { |
| bool mdataenablepolarity; |
| |
| unsigned int mpixelclock; |
| unsigned int mpixelrepetitioninput; |
| unsigned int mpixelrepetitionoutput; |
| }; |
| |
| struct hdmi_data_info { |
| unsigned int enc_in_bus_format; |
| unsigned int enc_out_bus_format; |
| unsigned int enc_in_encoding; |
| unsigned int enc_out_encoding; |
| unsigned int pix_repet_factor; |
| unsigned int hdcp_enable; |
| struct hdmi_vmode video_mode; |
| }; |
| |
| struct dw_hdmi_i2c { |
| struct i2c_adapter adap; |
| |
| struct mutex lock; /* used to serialize data transfers */ |
| struct completion cmp; |
| u8 stat; |
| |
| u8 slave_reg; |
| bool is_regaddr; |
| bool is_segment; |
| }; |
| |
| struct dw_hdmi_phy_data { |
| enum dw_hdmi_phy_type type; |
| const char *name; |
| unsigned int gen; |
| bool has_svsret; |
| int (*configure)(struct dw_hdmi *hdmi, |
| const struct dw_hdmi_plat_data *pdata, |
| unsigned long mpixelclock); |
| }; |
| |
| struct dw_hdmi { |
| struct drm_connector connector; |
| struct drm_bridge bridge; |
| |
| unsigned int version; |
| |
| struct platform_device *audio; |
| struct device *dev; |
| struct clk *isfr_clk; |
| struct clk *iahb_clk; |
| struct dw_hdmi_i2c *i2c; |
| |
| struct hdmi_data_info hdmi_data; |
| const struct dw_hdmi_plat_data *plat_data; |
| |
| int vic; |
| |
| u8 edid[HDMI_EDID_LEN]; |
| bool cable_plugin; |
| |
| struct { |
| const struct dw_hdmi_phy_ops *ops; |
| const char *name; |
| void *data; |
| bool enabled; |
| } phy; |
| |
| struct drm_display_mode previous_mode; |
| |
| struct i2c_adapter *ddc; |
| void __iomem *regs; |
| bool sink_is_hdmi; |
| bool sink_has_audio; |
| |
| struct mutex mutex; /* for state below and previous_mode */ |
| enum drm_connector_force force; /* mutex-protected force state */ |
| bool disabled; /* DRM has disabled our bridge */ |
| bool bridge_is_on; /* indicates the bridge is on */ |
| bool rxsense; /* rxsense state */ |
| u8 phy_mask; /* desired phy int mask settings */ |
| |
| spinlock_t audio_lock; |
| struct mutex audio_mutex; |
| unsigned int sample_rate; |
| unsigned int audio_cts; |
| unsigned int audio_n; |
| bool audio_enable; |
| |
| unsigned int reg_shift; |
| struct regmap *regm; |
| }; |
| |
| #define HDMI_IH_PHY_STAT0_RX_SENSE \ |
| (HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \ |
| HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3) |
| |
| #define HDMI_PHY_RX_SENSE \ |
| (HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \ |
| HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3) |
| |
| static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset) |
| { |
| regmap_write(hdmi->regm, offset << hdmi->reg_shift, val); |
| } |
| |
| static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset) |
| { |
| unsigned int val = 0; |
| |
| regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val); |
| |
| return val; |
| } |
| |
| static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg) |
| { |
| regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data); |
| } |
| |
| static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg, |
| u8 shift, u8 mask) |
| { |
| hdmi_modb(hdmi, data << shift, mask, reg); |
| } |
| |
| static void dw_hdmi_i2c_init(struct dw_hdmi *hdmi) |
| { |
| /* Software reset */ |
| hdmi_writeb(hdmi, 0x00, HDMI_I2CM_SOFTRSTZ); |
| |
| /* Set Standard Mode speed (determined to be 100KHz on iMX6) */ |
| hdmi_writeb(hdmi, 0x00, HDMI_I2CM_DIV); |
| |
| /* Set done, not acknowledged and arbitration interrupt polarities */ |
| hdmi_writeb(hdmi, HDMI_I2CM_INT_DONE_POL, HDMI_I2CM_INT); |
| hdmi_writeb(hdmi, HDMI_I2CM_CTLINT_NAC_POL | HDMI_I2CM_CTLINT_ARB_POL, |
| HDMI_I2CM_CTLINT); |
| |
| /* Clear DONE and ERROR interrupts */ |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, |
| HDMI_IH_I2CM_STAT0); |
| |
| /* Mute DONE and ERROR interrupts */ |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, |
| HDMI_IH_MUTE_I2CM_STAT0); |
| } |
| |
| static int dw_hdmi_i2c_read(struct dw_hdmi *hdmi, |
| unsigned char *buf, unsigned int length) |
| { |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; |
| int stat; |
| |
| if (!i2c->is_regaddr) { |
| dev_dbg(hdmi->dev, "set read register address to 0\n"); |
| i2c->slave_reg = 0x00; |
| i2c->is_regaddr = true; |
| } |
| |
| while (length--) { |
| reinit_completion(&i2c->cmp); |
| |
| hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS); |
| if (i2c->is_segment) |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ_EXT, |
| HDMI_I2CM_OPERATION); |
| else |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ, |
| HDMI_I2CM_OPERATION); |
| |
| stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10); |
| if (!stat) |
| return -EAGAIN; |
| |
| /* Check for error condition on the bus */ |
| if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR) |
| return -EIO; |
| |
| *buf++ = hdmi_readb(hdmi, HDMI_I2CM_DATAI); |
| } |
| i2c->is_segment = false; |
| |
| return 0; |
| } |
| |
| static int dw_hdmi_i2c_write(struct dw_hdmi *hdmi, |
| unsigned char *buf, unsigned int length) |
| { |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; |
| int stat; |
| |
| if (!i2c->is_regaddr) { |
| /* Use the first write byte as register address */ |
| i2c->slave_reg = buf[0]; |
| length--; |
| buf++; |
| i2c->is_regaddr = true; |
| } |
| |
| while (length--) { |
| reinit_completion(&i2c->cmp); |
| |
| hdmi_writeb(hdmi, *buf++, HDMI_I2CM_DATAO); |
| hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS); |
| hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_WRITE, |
| HDMI_I2CM_OPERATION); |
| |
| stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10); |
| if (!stat) |
| return -EAGAIN; |
| |
| /* Check for error condition on the bus */ |
| if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct dw_hdmi *hdmi = i2c_get_adapdata(adap); |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; |
| u8 addr = msgs[0].addr; |
| int i, ret = 0; |
| |
| dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr); |
| |
| for (i = 0; i < num; i++) { |
| if (msgs[i].len == 0) { |
| dev_dbg(hdmi->dev, |
| "unsupported transfer %d/%d, no data\n", |
| i + 1, num); |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| mutex_lock(&i2c->lock); |
| |
| /* Unmute DONE and ERROR interrupts */ |
| hdmi_writeb(hdmi, 0x00, HDMI_IH_MUTE_I2CM_STAT0); |
| |
| /* Set slave device address taken from the first I2C message */ |
| hdmi_writeb(hdmi, addr, HDMI_I2CM_SLAVE); |
| |
| /* Set slave device register address on transfer */ |
| i2c->is_regaddr = false; |
| |
| /* Set segment pointer for I2C extended read mode operation */ |
| i2c->is_segment = false; |
| |
| for (i = 0; i < num; i++) { |
| dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n", |
| i + 1, num, msgs[i].len, msgs[i].flags); |
| if (msgs[i].addr == DDC_SEGMENT_ADDR && msgs[i].len == 1) { |
| i2c->is_segment = true; |
| hdmi_writeb(hdmi, DDC_SEGMENT_ADDR, HDMI_I2CM_SEGADDR); |
| hdmi_writeb(hdmi, *msgs[i].buf, HDMI_I2CM_SEGPTR); |
| } else { |
| if (msgs[i].flags & I2C_M_RD) |
| ret = dw_hdmi_i2c_read(hdmi, msgs[i].buf, |
| msgs[i].len); |
| else |
| ret = dw_hdmi_i2c_write(hdmi, msgs[i].buf, |
| msgs[i].len); |
| } |
| if (ret < 0) |
| break; |
| } |
| |
| if (!ret) |
| ret = num; |
| |
| /* Mute DONE and ERROR interrupts */ |
| hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE, |
| HDMI_IH_MUTE_I2CM_STAT0); |
| |
| mutex_unlock(&i2c->lock); |
| |
| return ret; |
| } |
| |
| static u32 dw_hdmi_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm dw_hdmi_algorithm = { |
| .master_xfer = dw_hdmi_i2c_xfer, |
| .functionality = dw_hdmi_i2c_func, |
| }; |
| |
| static struct i2c_adapter *dw_hdmi_i2c_adapter(struct dw_hdmi *hdmi) |
| { |
| struct i2c_adapter *adap; |
| struct dw_hdmi_i2c *i2c; |
| int ret; |
| |
| i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL); |
| if (!i2c) |
| return ERR_PTR(-ENOMEM); |
| |
| mutex_init(&i2c->lock); |
| init_completion(&i2c->cmp); |
| |
| adap = &i2c->adap; |
| adap->class = I2C_CLASS_DDC; |
| adap->owner = THIS_MODULE; |
| adap->dev.parent = hdmi->dev; |
| adap->algo = &dw_hdmi_algorithm; |
| strlcpy(adap->name, "DesignWare HDMI", sizeof(adap->name)); |
| i2c_set_adapdata(adap, hdmi); |
| |
| ret = i2c_add_adapter(adap); |
| if (ret) { |
| dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name); |
| devm_kfree(hdmi->dev, i2c); |
| return ERR_PTR(ret); |
| } |
| |
| hdmi->i2c = i2c; |
| |
| dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name); |
| |
| return adap; |
| } |
| |
| static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts, |
| unsigned int n) |
| { |
| /* Must be set/cleared first */ |
| hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3); |
| |
| /* nshift factor = 0 */ |
| hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3); |
| |
| hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) | |
| HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3); |
| hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2); |
| hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1); |
| |
| hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3); |
| hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2); |
| hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1); |
| } |
| |
| static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk) |
| { |
| unsigned int n = (128 * freq) / 1000; |
| unsigned int mult = 1; |
| |
| while (freq > 48000) { |
| mult *= 2; |
| freq /= 2; |
| } |
| |
| switch (freq) { |
| case 32000: |
| if (pixel_clk == 25175000) |
| n = 4576; |
| else if (pixel_clk == 27027000) |
| n = 4096; |
| else if (pixel_clk == 74176000 || pixel_clk == 148352000) |
| n = 11648; |
| else |
| n = 4096; |
| n *= mult; |
| break; |
| |
| case 44100: |
| if (pixel_clk == 25175000) |
| n = 7007; |
| else if (pixel_clk == 74176000) |
| n = 17836; |
| else if (pixel_clk == 148352000) |
| n = 8918; |
| else |
| n = 6272; |
| n *= mult; |
| break; |
| |
| case 48000: |
| if (pixel_clk == 25175000) |
| n = 6864; |
| else if (pixel_clk == 27027000) |
| n = 6144; |
| else if (pixel_clk == 74176000) |
| n = 11648; |
| else if (pixel_clk == 148352000) |
| n = 5824; |
| else |
| n = 6144; |
| n *= mult; |
| break; |
| |
| default: |
| break; |
| } |
| |
| return n; |
| } |
| |
| static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi, |
| unsigned long pixel_clk, unsigned int sample_rate) |
| { |
| unsigned long ftdms = pixel_clk; |
| unsigned int n, cts; |
| u64 tmp; |
| |
| n = hdmi_compute_n(sample_rate, pixel_clk); |
| |
| /* |
| * Compute the CTS value from the N value. Note that CTS and N |
| * can be up to 20 bits in total, so we need 64-bit math. Also |
| * note that our TDMS clock is not fully accurate; it is accurate |
| * to kHz. This can introduce an unnecessary remainder in the |
| * calculation below, so we don't try to warn about that. |
| */ |
| tmp = (u64)ftdms * n; |
| do_div(tmp, 128 * sample_rate); |
| cts = tmp; |
| |
| dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n", |
| __func__, sample_rate, ftdms / 1000000, (ftdms / 1000) % 1000, |
| n, cts); |
| |
| spin_lock_irq(&hdmi->audio_lock); |
| hdmi->audio_n = n; |
| hdmi->audio_cts = cts; |
| hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0); |
| spin_unlock_irq(&hdmi->audio_lock); |
| } |
| |
| static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi) |
| { |
| mutex_lock(&hdmi->audio_mutex); |
| hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate); |
| mutex_unlock(&hdmi->audio_mutex); |
| } |
| |
| static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi) |
| { |
| mutex_lock(&hdmi->audio_mutex); |
| hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock, |
| hdmi->sample_rate); |
| mutex_unlock(&hdmi->audio_mutex); |
| } |
| |
| void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate) |
| { |
| mutex_lock(&hdmi->audio_mutex); |
| hdmi->sample_rate = rate; |
| hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock, |
| hdmi->sample_rate); |
| mutex_unlock(&hdmi->audio_mutex); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate); |
| |
| void dw_hdmi_audio_enable(struct dw_hdmi *hdmi) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hdmi->audio_lock, flags); |
| hdmi->audio_enable = true; |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n); |
| spin_unlock_irqrestore(&hdmi->audio_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_audio_enable); |
| |
| void dw_hdmi_audio_disable(struct dw_hdmi *hdmi) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hdmi->audio_lock, flags); |
| hdmi->audio_enable = false; |
| hdmi_set_cts_n(hdmi, hdmi->audio_cts, 0); |
| spin_unlock_irqrestore(&hdmi->audio_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_audio_disable); |
| |
| static bool hdmi_bus_fmt_is_rgb(unsigned int bus_format) |
| { |
| switch (bus_format) { |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| case MEDIA_BUS_FMT_RGB101010_1X30: |
| case MEDIA_BUS_FMT_RGB121212_1X36: |
| case MEDIA_BUS_FMT_RGB161616_1X48: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static bool hdmi_bus_fmt_is_yuv444(unsigned int bus_format) |
| { |
| switch (bus_format) { |
| case MEDIA_BUS_FMT_YUV8_1X24: |
| case MEDIA_BUS_FMT_YUV10_1X30: |
| case MEDIA_BUS_FMT_YUV12_1X36: |
| case MEDIA_BUS_FMT_YUV16_1X48: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static bool hdmi_bus_fmt_is_yuv422(unsigned int bus_format) |
| { |
| switch (bus_format) { |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| case MEDIA_BUS_FMT_UYVY10_1X20: |
| case MEDIA_BUS_FMT_UYVY12_1X24: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static int hdmi_bus_fmt_color_depth(unsigned int bus_format) |
| { |
| switch (bus_format) { |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| case MEDIA_BUS_FMT_YUV8_1X24: |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: |
| return 8; |
| |
| case MEDIA_BUS_FMT_RGB101010_1X30: |
| case MEDIA_BUS_FMT_YUV10_1X30: |
| case MEDIA_BUS_FMT_UYVY10_1X20: |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: |
| return 10; |
| |
| case MEDIA_BUS_FMT_RGB121212_1X36: |
| case MEDIA_BUS_FMT_YUV12_1X36: |
| case MEDIA_BUS_FMT_UYVY12_1X24: |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: |
| return 12; |
| |
| case MEDIA_BUS_FMT_RGB161616_1X48: |
| case MEDIA_BUS_FMT_YUV16_1X48: |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: |
| return 16; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| /* |
| * this submodule is responsible for the video data synchronization. |
| * for example, for RGB 4:4:4 input, the data map is defined as |
| * pin{47~40} <==> R[7:0] |
| * pin{31~24} <==> G[7:0] |
| * pin{15~8} <==> B[7:0] |
| */ |
| static void hdmi_video_sample(struct dw_hdmi *hdmi) |
| { |
| int color_format = 0; |
| u8 val; |
| |
| switch (hdmi->hdmi_data.enc_in_bus_format) { |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| color_format = 0x01; |
| break; |
| case MEDIA_BUS_FMT_RGB101010_1X30: |
| color_format = 0x03; |
| break; |
| case MEDIA_BUS_FMT_RGB121212_1X36: |
| color_format = 0x05; |
| break; |
| case MEDIA_BUS_FMT_RGB161616_1X48: |
| color_format = 0x07; |
| break; |
| |
| case MEDIA_BUS_FMT_YUV8_1X24: |
| case MEDIA_BUS_FMT_UYYVYY8_0_5X24: |
| color_format = 0x09; |
| break; |
| case MEDIA_BUS_FMT_YUV10_1X30: |
| case MEDIA_BUS_FMT_UYYVYY10_0_5X30: |
| color_format = 0x0B; |
| break; |
| case MEDIA_BUS_FMT_YUV12_1X36: |
| case MEDIA_BUS_FMT_UYYVYY12_0_5X36: |
| color_format = 0x0D; |
| break; |
| case MEDIA_BUS_FMT_YUV16_1X48: |
| case MEDIA_BUS_FMT_UYYVYY16_0_5X48: |
| color_format = 0x0F; |
| break; |
| |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| color_format = 0x16; |
| break; |
| case MEDIA_BUS_FMT_UYVY10_1X20: |
| color_format = 0x14; |
| break; |
| case MEDIA_BUS_FMT_UYVY12_1X24: |
| color_format = 0x12; |
| break; |
| |
| default: |
| return; |
| } |
| |
| val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE | |
| ((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) & |
| HDMI_TX_INVID0_VIDEO_MAPPING_MASK); |
| hdmi_writeb(hdmi, val, HDMI_TX_INVID0); |
| |
| /* Enable TX stuffing: When DE is inactive, fix the output data to 0 */ |
| val = HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE | |
| HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE | |
| HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE; |
| hdmi_writeb(hdmi, val, HDMI_TX_INSTUFFING); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA0); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA1); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA0); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA1); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA0); |
| hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA1); |
| } |
| |
| static int is_color_space_conversion(struct dw_hdmi *hdmi) |
| { |
| return hdmi->hdmi_data.enc_in_bus_format != hdmi->hdmi_data.enc_out_bus_format; |
| } |
| |
| static int is_color_space_decimation(struct dw_hdmi *hdmi) |
| { |
| if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) |
| return 0; |
| |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format) || |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_in_bus_format)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int is_color_space_interpolation(struct dw_hdmi *hdmi) |
| { |
| if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_in_bus_format)) |
| return 0; |
| |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) || |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void dw_hdmi_update_csc_coeffs(struct dw_hdmi *hdmi) |
| { |
| const u16 (*csc_coeff)[3][4] = &csc_coeff_default; |
| unsigned i; |
| u32 csc_scale = 1; |
| |
| if (is_color_space_conversion(hdmi)) { |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) { |
| if (hdmi->hdmi_data.enc_out_encoding == |
| V4L2_YCBCR_ENC_601) |
| csc_coeff = &csc_coeff_rgb_out_eitu601; |
| else |
| csc_coeff = &csc_coeff_rgb_out_eitu709; |
| } else if (hdmi_bus_fmt_is_rgb( |
| hdmi->hdmi_data.enc_in_bus_format)) { |
| if (hdmi->hdmi_data.enc_out_encoding == |
| V4L2_YCBCR_ENC_601) |
| csc_coeff = &csc_coeff_rgb_in_eitu601; |
| else |
| csc_coeff = &csc_coeff_rgb_in_eitu709; |
| csc_scale = 0; |
| } |
| } |
| |
| /* The CSC registers are sequential, alternating MSB then LSB */ |
| for (i = 0; i < ARRAY_SIZE(csc_coeff_default[0]); i++) { |
| u16 coeff_a = (*csc_coeff)[0][i]; |
| u16 coeff_b = (*csc_coeff)[1][i]; |
| u16 coeff_c = (*csc_coeff)[2][i]; |
| |
| hdmi_writeb(hdmi, coeff_a & 0xff, HDMI_CSC_COEF_A1_LSB + i * 2); |
| hdmi_writeb(hdmi, coeff_a >> 8, HDMI_CSC_COEF_A1_MSB + i * 2); |
| hdmi_writeb(hdmi, coeff_b & 0xff, HDMI_CSC_COEF_B1_LSB + i * 2); |
| hdmi_writeb(hdmi, coeff_b >> 8, HDMI_CSC_COEF_B1_MSB + i * 2); |
| hdmi_writeb(hdmi, coeff_c & 0xff, HDMI_CSC_COEF_C1_LSB + i * 2); |
| hdmi_writeb(hdmi, coeff_c >> 8, HDMI_CSC_COEF_C1_MSB + i * 2); |
| } |
| |
| hdmi_modb(hdmi, csc_scale, HDMI_CSC_SCALE_CSCSCALE_MASK, |
| HDMI_CSC_SCALE); |
| } |
| |
| static void hdmi_video_csc(struct dw_hdmi *hdmi) |
| { |
| int color_depth = 0; |
| int interpolation = HDMI_CSC_CFG_INTMODE_DISABLE; |
| int decimation = 0; |
| |
| /* YCC422 interpolation to 444 mode */ |
| if (is_color_space_interpolation(hdmi)) |
| interpolation = HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1; |
| else if (is_color_space_decimation(hdmi)) |
| decimation = HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3; |
| |
| switch (hdmi_bus_fmt_color_depth(hdmi->hdmi_data.enc_out_bus_format)) { |
| case 8: |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP; |
| break; |
| case 10: |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP; |
| break; |
| case 12: |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP; |
| break; |
| case 16: |
| color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP; |
| break; |
| |
| default: |
| return; |
| } |
| |
| /* Configure the CSC registers */ |
| hdmi_writeb(hdmi, interpolation | decimation, HDMI_CSC_CFG); |
| hdmi_modb(hdmi, color_depth, HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK, |
| HDMI_CSC_SCALE); |
| |
| dw_hdmi_update_csc_coeffs(hdmi); |
| } |
| |
| /* |
| * HDMI video packetizer is used to packetize the data. |
| * for example, if input is YCC422 mode or repeater is used, |
| * data should be repacked this module can be bypassed. |
| */ |
| static void hdmi_video_packetize(struct dw_hdmi *hdmi) |
| { |
| unsigned int color_depth = 0; |
| unsigned int remap_size = HDMI_VP_REMAP_YCC422_16bit; |
| unsigned int output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_PP; |
| struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data; |
| u8 val, vp_conf; |
| |
| if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) || |
| hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) { |
| switch (hdmi_bus_fmt_color_depth( |
| hdmi->hdmi_data.enc_out_bus_format)) { |
| case 8: |
| color_depth = 4; |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS; |
| break; |
| case 10: |
| color_depth = 5; |
| break; |
| case 12: |
| color_depth = 6; |
| break; |
| case 16: |
| color_depth = 7; |
| break; |
| default: |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS; |
| } |
| } else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) { |
| switch (hdmi_bus_fmt_color_depth( |
| hdmi->hdmi_data.enc_out_bus_format)) { |
| case 0: |
| case 8: |
| remap_size = HDMI_VP_REMAP_YCC422_16bit; |
| break; |
| case 10: |
| remap_size = HDMI_VP_REMAP_YCC422_20bit; |
| break; |
| case 12: |
| remap_size = HDMI_VP_REMAP_YCC422_24bit; |
| break; |
| |
| default: |
| return; |
| } |
| output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422; |
| } else { |
| return; |
| } |
| |
| /* set the packetizer registers */ |
| val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) & |
| HDMI_VP_PR_CD_COLOR_DEPTH_MASK) | |
| ((hdmi_data->pix_repet_factor << |
| HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET) & |
| HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK); |
| hdmi_writeb(hdmi, val, HDMI_VP_PR_CD); |
| |
| hdmi_modb(hdmi, HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE, |
| HDMI_VP_STUFF_PR_STUFFING_MASK, HDMI_VP_STUFF); |
| |
| /* Data from pixel repeater block */ |
| if (hdmi_data->pix_repet_factor > 1) { |
| vp_conf = HDMI_VP_CONF_PR_EN_ENABLE | |
| HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER; |
| } else { /* data from packetizer block */ |
| vp_conf = HDMI_VP_CONF_PR_EN_DISABLE | |
| HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER; |
| } |
| |
| hdmi_modb(hdmi, vp_conf, |
| HDMI_VP_CONF_PR_EN_MASK | |
| HDMI_VP_CONF_BYPASS_SELECT_MASK, HDMI_VP_CONF); |
| |
| hdmi_modb(hdmi, 1 << HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET, |
| HDMI_VP_STUFF_IDEFAULT_PHASE_MASK, HDMI_VP_STUFF); |
| |
| hdmi_writeb(hdmi, remap_size, HDMI_VP_REMAP); |
| |
| if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_PP) { |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE | |
| HDMI_VP_CONF_PP_EN_ENABLE | |
| HDMI_VP_CONF_YCC422_EN_DISABLE; |
| } else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422) { |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE | |
| HDMI_VP_CONF_PP_EN_DISABLE | |
| HDMI_VP_CONF_YCC422_EN_ENABLE; |
| } else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS) { |
| vp_conf = HDMI_VP_CONF_BYPASS_EN_ENABLE | |
| HDMI_VP_CONF_PP_EN_DISABLE | |
| HDMI_VP_CONF_YCC422_EN_DISABLE; |
| } else { |
| return; |
| } |
| |
| hdmi_modb(hdmi, vp_conf, |
| HDMI_VP_CONF_BYPASS_EN_MASK | HDMI_VP_CONF_PP_EN_ENMASK | |
| HDMI_VP_CONF_YCC422_EN_MASK, HDMI_VP_CONF); |
| |
| hdmi_modb(hdmi, HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE | |
| HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE, |
| HDMI_VP_STUFF_PP_STUFFING_MASK | |
| HDMI_VP_STUFF_YCC422_STUFFING_MASK, HDMI_VP_STUFF); |
| |
| hdmi_modb(hdmi, output_select, HDMI_VP_CONF_OUTPUT_SELECTOR_MASK, |
| HDMI_VP_CONF); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Synopsys PHY Handling |
| */ |
| |
| static inline void hdmi_phy_test_clear(struct dw_hdmi *hdmi, |
| unsigned char bit) |
| { |
| hdmi_modb(hdmi, bit << HDMI_PHY_TST0_TSTCLR_OFFSET, |
| HDMI_PHY_TST0_TSTCLR_MASK, HDMI_PHY_TST0); |
| } |
| |
| static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec) |
| { |
| u32 val; |
| |
| while ((val = hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) { |
| if (msec-- == 0) |
| return false; |
| udelay(1000); |
| } |
| hdmi_writeb(hdmi, val, HDMI_IH_I2CMPHY_STAT0); |
| |
| return true; |
| } |
| |
| void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data, |
| unsigned char addr) |
| { |
| hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0); |
| hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR); |
| hdmi_writeb(hdmi, (unsigned char)(data >> 8), |
| HDMI_PHY_I2CM_DATAO_1_ADDR); |
| hdmi_writeb(hdmi, (unsigned char)(data >> 0), |
| HDMI_PHY_I2CM_DATAO_0_ADDR); |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_OPERATION_ADDR_WRITE, |
| HDMI_PHY_I2CM_OPERATION_ADDR); |
| hdmi_phy_wait_i2c_done(hdmi, 1000); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write); |
| |
| static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable) |
| { |
| hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_PDZ_OFFSET, |
| HDMI_PHY_CONF0_PDZ_MASK); |
| } |
| |
| static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_ENTMDS_OFFSET, |
| HDMI_PHY_CONF0_ENTMDS_MASK); |
| } |
| |
| static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_SVSRET_OFFSET, |
| HDMI_PHY_CONF0_SVSRET_MASK); |
| } |
| |
| static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET, |
| HDMI_PHY_CONF0_GEN2_PDDQ_MASK); |
| } |
| |
| static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET, |
| HDMI_PHY_CONF0_GEN2_TXPWRON_MASK); |
| } |
| |
| static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_SELDATAENPOL_OFFSET, |
| HDMI_PHY_CONF0_SELDATAENPOL_MASK); |
| } |
| |
| static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable) |
| { |
| hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0, |
| HDMI_PHY_CONF0_SELDIPIF_OFFSET, |
| HDMI_PHY_CONF0_SELDIPIF_MASK); |
| } |
| |
| static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi) |
| { |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; |
| unsigned int i; |
| u16 val; |
| |
| if (phy->gen == 1) { |
| dw_hdmi_phy_enable_tmds(hdmi, 0); |
| dw_hdmi_phy_enable_powerdown(hdmi, true); |
| return; |
| } |
| |
| dw_hdmi_phy_gen2_txpwron(hdmi, 0); |
| |
| /* |
| * Wait for TX_PHY_LOCK to be deasserted to indicate that the PHY went |
| * to low power mode. |
| */ |
| for (i = 0; i < 5; ++i) { |
| val = hdmi_readb(hdmi, HDMI_PHY_STAT0); |
| if (!(val & HDMI_PHY_TX_PHY_LOCK)) |
| break; |
| |
| usleep_range(1000, 2000); |
| } |
| |
| if (val & HDMI_PHY_TX_PHY_LOCK) |
| dev_warn(hdmi->dev, "PHY failed to power down\n"); |
| else |
| dev_dbg(hdmi->dev, "PHY powered down in %u iterations\n", i); |
| |
| dw_hdmi_phy_gen2_pddq(hdmi, 1); |
| } |
| |
| static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi) |
| { |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; |
| unsigned int i; |
| u8 val; |
| |
| if (phy->gen == 1) { |
| dw_hdmi_phy_enable_powerdown(hdmi, false); |
| |
| /* Toggle TMDS enable. */ |
| dw_hdmi_phy_enable_tmds(hdmi, 0); |
| dw_hdmi_phy_enable_tmds(hdmi, 1); |
| return 0; |
| } |
| |
| dw_hdmi_phy_gen2_txpwron(hdmi, 1); |
| dw_hdmi_phy_gen2_pddq(hdmi, 0); |
| |
| /* Wait for PHY PLL lock */ |
| for (i = 0; i < 5; ++i) { |
| val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK; |
| if (val) |
| break; |
| |
| usleep_range(1000, 2000); |
| } |
| |
| if (!val) { |
| dev_err(hdmi->dev, "PHY PLL failed to lock\n"); |
| return -ETIMEDOUT; |
| } |
| |
| dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i); |
| return 0; |
| } |
| |
| /* |
| * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the available |
| * information the DWC MHL PHY has the same register layout and is thus also |
| * supported by this function. |
| */ |
| static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi, |
| const struct dw_hdmi_plat_data *pdata, |
| unsigned long mpixelclock) |
| { |
| const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg; |
| const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr; |
| const struct dw_hdmi_phy_config *phy_config = pdata->phy_config; |
| |
| /* PLL/MPLL Cfg - always match on final entry */ |
| for (; mpll_config->mpixelclock != ~0UL; mpll_config++) |
| if (mpixelclock <= mpll_config->mpixelclock) |
| break; |
| |
| for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++) |
| if (mpixelclock <= curr_ctrl->mpixelclock) |
| break; |
| |
| for (; phy_config->mpixelclock != ~0UL; phy_config++) |
| if (mpixelclock <= phy_config->mpixelclock) |
| break; |
| |
| if (mpll_config->mpixelclock == ~0UL || |
| curr_ctrl->mpixelclock == ~0UL || |
| phy_config->mpixelclock == ~0UL) |
| return -EINVAL; |
| |
| dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce, |
| HDMI_3D_TX_PHY_CPCE_CTRL); |
| dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp, |
| HDMI_3D_TX_PHY_GMPCTRL); |
| dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0], |
| HDMI_3D_TX_PHY_CURRCTRL); |
| |
| dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL); |
| dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK, |
| HDMI_3D_TX_PHY_MSM_CTRL); |
| |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM); |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr, |
| HDMI_3D_TX_PHY_CKSYMTXCTRL); |
| dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr, |
| HDMI_3D_TX_PHY_VLEVCTRL); |
| |
| /* Override and disable clock termination. */ |
| dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE, |
| HDMI_3D_TX_PHY_CKCALCTRL); |
| |
| return 0; |
| } |
| |
| static int hdmi_phy_configure(struct dw_hdmi *hdmi) |
| { |
| const struct dw_hdmi_phy_data *phy = hdmi->phy.data; |
| const struct dw_hdmi_plat_data *pdata = hdmi->plat_data; |
| unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock; |
| int ret; |
| |
| dw_hdmi_phy_power_off(hdmi); |
| |
| /* Leave low power consumption mode by asserting SVSRET. */ |
| if (phy->has_svsret) |
| dw_hdmi_phy_enable_svsret(hdmi, 1); |
| |
| /* PHY reset. The reset signal is active high on Gen2 PHYs. */ |
| hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); |
| hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); |
| |
| hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST); |
| |
| hdmi_phy_test_clear(hdmi, 1); |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2, |
| HDMI_PHY_I2CM_SLAVE_ADDR); |
| hdmi_phy_test_clear(hdmi, 0); |
| |
| /* Write to the PHY as configured by the platform */ |
| if (pdata->configure_phy) |
| ret = pdata->configure_phy(hdmi, pdata, mpixelclock); |
| else |
| ret = phy->configure(hdmi, pdata, mpixelclock); |
| if (ret) { |
| dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n", |
| mpixelclock); |
| return ret; |
| } |
| |
| return dw_hdmi_phy_power_on(hdmi); |
| } |
| |
| static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, |
| struct drm_display_mode *mode) |
| { |
| int i, ret; |
| |
| /* HDMI Phy spec says to do the phy initialization sequence twice */ |
| for (i = 0; i < 2; i++) { |
| dw_hdmi_phy_sel_data_en_pol(hdmi, 1); |
| dw_hdmi_phy_sel_interface_control(hdmi, 0); |
| |
| ret = hdmi_phy_configure(hdmi); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data) |
| { |
| dw_hdmi_phy_power_off(hdmi); |
| } |
| |
| static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, |
| void *data) |
| { |
| return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ? |
| connector_status_connected : connector_status_disconnected; |
| } |
| |
| static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data, |
| bool force, bool disabled, bool rxsense) |
| { |
| u8 old_mask = hdmi->phy_mask; |
| |
| if (force || disabled || !rxsense) |
| hdmi->phy_mask |= HDMI_PHY_RX_SENSE; |
| else |
| hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE; |
| |
| if (old_mask != hdmi->phy_mask) |
| hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); |
| } |
| |
| static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data) |
| { |
| /* |
| * Configure the PHY RX SENSE and HPD interrupts polarities and clear |
| * any pending interrupt. |
| */ |
| hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0); |
| hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, |
| HDMI_IH_PHY_STAT0); |
| |
| /* Enable cable hot plug irq. */ |
| hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0); |
| |
| /* Clear and unmute interrupts. */ |
| hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE, |
| HDMI_IH_PHY_STAT0); |
| hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), |
| HDMI_IH_MUTE_PHY_STAT0); |
| } |
| |
| static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = { |
| .init = dw_hdmi_phy_init, |
| .disable = dw_hdmi_phy_disable, |
| .read_hpd = dw_hdmi_phy_read_hpd, |
| .update_hpd = dw_hdmi_phy_update_hpd, |
| .setup_hpd = dw_hdmi_phy_setup_hpd, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * HDMI TX Setup |
| */ |
| |
| static void hdmi_tx_hdcp_config(struct dw_hdmi *hdmi) |
| { |
| u8 de; |
| |
| if (hdmi->hdmi_data.video_mode.mdataenablepolarity) |
| de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH; |
| else |
| de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW; |
| |
| /* disable rx detect */ |
| hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_DISABLE, |
| HDMI_A_HDCPCFG0_RXDETECT_MASK, HDMI_A_HDCPCFG0); |
| |
| hdmi_modb(hdmi, de, HDMI_A_VIDPOLCFG_DATAENPOL_MASK, HDMI_A_VIDPOLCFG); |
| |
| hdmi_modb(hdmi, HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE, |
| HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK, HDMI_A_HDCPCFG1); |
| } |
| |
| static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode) |
| { |
| struct hdmi_avi_infoframe frame; |
| u8 val; |
| |
| /* Initialise info frame from DRM mode */ |
| drm_hdmi_avi_infoframe_from_display_mode(&frame, mode); |
| |
| if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) |
| frame.colorspace = HDMI_COLORSPACE_YUV444; |
| else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) |
| frame.colorspace = HDMI_COLORSPACE_YUV422; |
| else |
| frame.colorspace = HDMI_COLORSPACE_RGB; |
| |
| /* Set up colorimetry */ |
| switch (hdmi->hdmi_data.enc_out_encoding) { |
| case V4L2_YCBCR_ENC_601: |
| if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601) |
| frame.colorimetry = HDMI_COLORIMETRY_EXTENDED; |
| else |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_601; |
| frame.extended_colorimetry = |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; |
| break; |
| case V4L2_YCBCR_ENC_709: |
| if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709) |
| frame.colorimetry = HDMI_COLORIMETRY_EXTENDED; |
| else |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_709; |
| frame.extended_colorimetry = |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_709; |
| break; |
| default: /* Carries no data */ |
| frame.colorimetry = HDMI_COLORIMETRY_ITU_601; |
| frame.extended_colorimetry = |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; |
| break; |
| } |
| |
| frame.scan_mode = HDMI_SCAN_MODE_NONE; |
| |
| /* |
| * The Designware IP uses a different byte format from standard |
| * AVI info frames, though generally the bits are in the correct |
| * bytes. |
| */ |
| |
| /* |
| * AVI data byte 1 differences: Colorspace in bits 0,1 rather than 5,6, |
| * scan info in bits 4,5 rather than 0,1 and active aspect present in |
| * bit 6 rather than 4. |
| */ |
| val = (frame.scan_mode & 3) << 4 | (frame.colorspace & 3); |
| if (frame.active_aspect & 15) |
| val |= HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT; |
| if (frame.top_bar || frame.bottom_bar) |
| val |= HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR; |
| if (frame.left_bar || frame.right_bar) |
| val |= HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR; |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF0); |
| |
| /* AVI data byte 2 differences: none */ |
| val = ((frame.colorimetry & 0x3) << 6) | |
| ((frame.picture_aspect & 0x3) << 4) | |
| (frame.active_aspect & 0xf); |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF1); |
| |
| /* AVI data byte 3 differences: none */ |
| val = ((frame.extended_colorimetry & 0x7) << 4) | |
| ((frame.quantization_range & 0x3) << 2) | |
| (frame.nups & 0x3); |
| if (frame.itc) |
| val |= HDMI_FC_AVICONF2_IT_CONTENT_VALID; |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF2); |
| |
| /* AVI data byte 4 differences: none */ |
| val = frame.video_code & 0x7f; |
| hdmi_writeb(hdmi, val, HDMI_FC_AVIVID); |
| |
| /* AVI Data Byte 5- set up input and output pixel repetition */ |
| val = (((hdmi->hdmi_data.video_mode.mpixelrepetitioninput + 1) << |
| HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET) & |
| HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK) | |
| ((hdmi->hdmi_data.video_mode.mpixelrepetitionoutput << |
| HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET) & |
| HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK); |
| hdmi_writeb(hdmi, val, HDMI_FC_PRCONF); |
| |
| /* |
| * AVI data byte 5 differences: content type in 0,1 rather than 4,5, |
| * ycc range in bits 2,3 rather than 6,7 |
| */ |
| val = ((frame.ycc_quantization_range & 0x3) << 2) | |
| (frame.content_type & 0x3); |
| hdmi_writeb(hdmi, val, HDMI_FC_AVICONF3); |
| |
| /* AVI Data Bytes 6-13 */ |
| hdmi_writeb(hdmi, frame.top_bar & 0xff, HDMI_FC_AVIETB0); |
| hdmi_writeb(hdmi, (frame.top_bar >> 8) & 0xff, HDMI_FC_AVIETB1); |
| hdmi_writeb(hdmi, frame.bottom_bar & 0xff, HDMI_FC_AVISBB0); |
| hdmi_writeb(hdmi, (frame.bottom_bar >> 8) & 0xff, HDMI_FC_AVISBB1); |
| hdmi_writeb(hdmi, frame.left_bar & 0xff, HDMI_FC_AVIELB0); |
| hdmi_writeb(hdmi, (frame.left_bar >> 8) & 0xff, HDMI_FC_AVIELB1); |
| hdmi_writeb(hdmi, frame.right_bar & 0xff, HDMI_FC_AVISRB0); |
| hdmi_writeb(hdmi, (frame.right_bar >> 8) & 0xff, HDMI_FC_AVISRB1); |
| } |
| |
| static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi, |
| struct drm_display_mode *mode) |
| { |
| struct hdmi_vendor_infoframe frame; |
| u8 buffer[10]; |
| ssize_t err; |
| |
| err = drm_hdmi_vendor_infoframe_from_display_mode(&frame, mode); |
| if (err < 0) |
| /* |
| * Going into that statement does not means vendor infoframe |
| * fails. It just informed us that vendor infoframe is not |
| * needed for the selected mode. Only 4k or stereoscopic 3D |
| * mode requires vendor infoframe. So just simply return. |
| */ |
| return; |
| |
| err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer)); |
| if (err < 0) { |
| dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n", |
| err); |
| return; |
| } |
| hdmi_mask_writeb(hdmi, 0, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET, |
| HDMI_FC_DATAUTO0_VSD_MASK); |
| |
| /* Set the length of HDMI vendor specific InfoFrame payload */ |
| hdmi_writeb(hdmi, buffer[2], HDMI_FC_VSDSIZE); |
| |
| /* Set 24bit IEEE Registration Identifier */ |
| hdmi_writeb(hdmi, buffer[4], HDMI_FC_VSDIEEEID0); |
| hdmi_writeb(hdmi, buffer[5], HDMI_FC_VSDIEEEID1); |
| hdmi_writeb(hdmi, buffer[6], HDMI_FC_VSDIEEEID2); |
| |
| /* Set HDMI_Video_Format and HDMI_VIC/3D_Structure */ |
| hdmi_writeb(hdmi, buffer[7], HDMI_FC_VSDPAYLOAD0); |
| hdmi_writeb(hdmi, buffer[8], HDMI_FC_VSDPAYLOAD1); |
| |
| if (frame.s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) |
| hdmi_writeb(hdmi, buffer[9], HDMI_FC_VSDPAYLOAD2); |
| |
| /* Packet frame interpolation */ |
| hdmi_writeb(hdmi, 1, HDMI_FC_DATAUTO1); |
| |
| /* Auto packets per frame and line spacing */ |
| hdmi_writeb(hdmi, 0x11, HDMI_FC_DATAUTO2); |
| |
| /* Configures the Frame Composer On RDRB mode */ |
| hdmi_mask_writeb(hdmi, 1, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET, |
| HDMI_FC_DATAUTO0_VSD_MASK); |
| } |
| |
| static void hdmi_av_composer(struct dw_hdmi *hdmi, |
| const struct drm_display_mode *mode) |
| { |
| u8 inv_val; |
| struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode; |
| int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len; |
| unsigned int vdisplay; |
| |
| vmode->mpixelclock = mode->clock * 1000; |
| |
| dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock); |
| |
| /* Set up HDMI_FC_INVIDCONF */ |
| inv_val = (hdmi->hdmi_data.hdcp_enable ? |
| HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE : |
| HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE); |
| |
| inv_val |= mode->flags & DRM_MODE_FLAG_PVSYNC ? |
| HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH : |
| HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW; |
| |
| inv_val |= mode->flags & DRM_MODE_FLAG_PHSYNC ? |
| HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH : |
| HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW; |
| |
| inv_val |= (vmode->mdataenablepolarity ? |
| HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH : |
| HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW); |
| |
| if (hdmi->vic == 39) |
| inv_val |= HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH; |
| else |
| inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ? |
| HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH : |
| HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW; |
| |
| inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ? |
| HDMI_FC_INVIDCONF_IN_I_P_INTERLACED : |
| HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE; |
| |
| inv_val |= hdmi->sink_is_hdmi ? |
| HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE : |
| HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE; |
| |
| hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF); |
| |
| vdisplay = mode->vdisplay; |
| vblank = mode->vtotal - mode->vdisplay; |
| v_de_vs = mode->vsync_start - mode->vdisplay; |
| vsync_len = mode->vsync_end - mode->vsync_start; |
| |
| /* |
| * When we're setting an interlaced mode, we need |
| * to adjust the vertical timing to suit. |
| */ |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| vdisplay /= 2; |
| vblank /= 2; |
| v_de_vs /= 2; |
| vsync_len /= 2; |
| } |
| |
| /* Set up horizontal active pixel width */ |
| hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1); |
| hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0); |
| |
| /* Set up vertical active lines */ |
| hdmi_writeb(hdmi, vdisplay >> 8, HDMI_FC_INVACTV1); |
| hdmi_writeb(hdmi, vdisplay, HDMI_FC_INVACTV0); |
| |
| /* Set up horizontal blanking pixel region width */ |
| hblank = mode->htotal - mode->hdisplay; |
| hdmi_writeb(hdmi, hblank >> 8, HDMI_FC_INHBLANK1); |
| hdmi_writeb(hdmi, hblank, HDMI_FC_INHBLANK0); |
| |
| /* Set up vertical blanking pixel region width */ |
| hdmi_writeb(hdmi, vblank, HDMI_FC_INVBLANK); |
| |
| /* Set up HSYNC active edge delay width (in pixel clks) */ |
| h_de_hs = mode->hsync_start - mode->hdisplay; |
| hdmi_writeb(hdmi, h_de_hs >> 8, HDMI_FC_HSYNCINDELAY1); |
| hdmi_writeb(hdmi, h_de_hs, HDMI_FC_HSYNCINDELAY0); |
| |
| /* Set up VSYNC active edge delay (in lines) */ |
| hdmi_writeb(hdmi, v_de_vs, HDMI_FC_VSYNCINDELAY); |
| |
| /* Set up HSYNC active pulse width (in pixel clks) */ |
| hsync_len = mode->hsync_end - mode->hsync_start; |
| hdmi_writeb(hdmi, hsync_len >> 8, HDMI_FC_HSYNCINWIDTH1); |
| hdmi_writeb(hdmi, hsync_len, HDMI_FC_HSYNCINWIDTH0); |
| |
| /* Set up VSYNC active edge delay (in lines) */ |
| hdmi_writeb(hdmi, vsync_len, HDMI_FC_VSYNCINWIDTH); |
| } |
| |
| /* HDMI Initialization Step B.4 */ |
| static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi) |
| { |
| u8 clkdis; |
| |
| /* control period minimum duration */ |
| hdmi_writeb(hdmi, 12, HDMI_FC_CTRLDUR); |
| hdmi_writeb(hdmi, 32, HDMI_FC_EXCTRLDUR); |
| hdmi_writeb(hdmi, 1, HDMI_FC_EXCTRLSPAC); |
| |
| /* Set to fill TMDS data channels */ |
| hdmi_writeb(hdmi, 0x0B, HDMI_FC_CH0PREAM); |
| hdmi_writeb(hdmi, 0x16, HDMI_FC_CH1PREAM); |
| hdmi_writeb(hdmi, 0x21, HDMI_FC_CH2PREAM); |
| |
| /* Enable pixel clock and tmds data path */ |
| clkdis = 0x7F; |
| clkdis &= ~HDMI_MC_CLKDIS_PIXELCLK_DISABLE; |
| hdmi_writeb(hdmi, clkdis, HDMI_MC_CLKDIS); |
| |
| clkdis &= ~HDMI_MC_CLKDIS_TMDSCLK_DISABLE; |
| hdmi_writeb(hdmi, clkdis, HDMI_MC_CLKDIS); |
| |
| /* Enable csc path */ |
| if (is_color_space_conversion(hdmi)) { |
| clkdis &= ~HDMI_MC_CLKDIS_CSCCLK_DISABLE; |
| hdmi_writeb(hdmi, clkdis, HDMI_MC_CLKDIS); |
| } |
| |
| /* Enable color space conversion if needed */ |
| if (is_color_space_conversion(hdmi)) |
| hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH, |
| HDMI_MC_FLOWCTRL); |
| else |
| hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS, |
| HDMI_MC_FLOWCTRL); |
| } |
| |
| static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi) |
| { |
| hdmi_modb(hdmi, 0, HDMI_MC_CLKDIS_AUDCLK_DISABLE, HDMI_MC_CLKDIS); |
| } |
| |
| /* Workaround to clear the overflow condition */ |
| static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi) |
| { |
| unsigned int count; |
| unsigned int i; |
| u8 val; |
| |
| /* |
| * Under some circumstances the Frame Composer arithmetic unit can miss |
| * an FC register write due to being busy processing the previous one. |
| * The issue can be worked around by issuing a TMDS software reset and |
| * then write one of the FC registers several times. |
| * |
| * The number of iterations matters and depends on the HDMI TX revision |
| * (and possibly on the platform). So far only i.MX6Q (v1.30a) and |
| * i.MX6DL (v1.31a) have been identified as needing the workaround, with |
| * 4 and 1 iterations respectively. |
| */ |
| |
| switch (hdmi->version) { |
| case 0x130a: |
| count = 4; |
| break; |
| case 0x131a: |
| count = 1; |
| break; |
| default: |
| return; |
| } |
| |
| /* TMDS software reset */ |
| hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, HDMI_MC_SWRSTZ); |
| |
| val = hdmi_readb(hdmi, HDMI_FC_INVIDCONF); |
| for (i = 0; i < count; i++) |
| hdmi_writeb(hdmi, val, HDMI_FC_INVIDCONF); |
| } |
| |
| static void hdmi_enable_overflow_interrupts(struct dw_hdmi *hdmi) |
| { |
| hdmi_writeb(hdmi, 0, HDMI_FC_MASK2); |
| hdmi_writeb(hdmi, 0, HDMI_IH_MUTE_FC_STAT2); |
| } |
| |
| static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi) |
| { |
| hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK, |
| HDMI_IH_MUTE_FC_STAT2); |
| } |
| |
| static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode) |
| { |
| int ret; |
| |
| hdmi_disable_overflow_interrupts(hdmi); |
| |
| hdmi->vic = drm_match_cea_mode(mode); |
| |
| if (!hdmi->vic) { |
| dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n"); |
| } else { |
| dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic); |
| } |
| |
| if ((hdmi->vic == 6) || (hdmi->vic == 7) || |
| (hdmi->vic == 21) || (hdmi->vic == 22) || |
| (hdmi->vic == 2) || (hdmi->vic == 3) || |
| (hdmi->vic == 17) || (hdmi->vic == 18)) |
| hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601; |
| else |
| hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709; |
| |
| hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0; |
| hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0; |
| |
| /* TOFIX: Get input format from plat data or fallback to RGB888 */ |
| if (hdmi->plat_data->input_bus_format) |
| hdmi->hdmi_data.enc_in_bus_format = |
| hdmi->plat_data->input_bus_format; |
| else |
| hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24; |
| |
| /* TOFIX: Get input encoding from plat data or fallback to none */ |
| if (hdmi->plat_data->input_bus_encoding) |
| hdmi->hdmi_data.enc_in_encoding = |
| hdmi->plat_data->input_bus_encoding; |
| else |
| hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT; |
| |
| /* TOFIX: Default to RGB888 output format */ |
| hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24; |
| |
| hdmi->hdmi_data.pix_repet_factor = 0; |
| hdmi->hdmi_data.hdcp_enable = 0; |
| hdmi->hdmi_data.video_mode.mdataenablepolarity = true; |
| |
| /* HDMI Initialization Step B.1 */ |
| hdmi_av_composer(hdmi, mode); |
| |
| /* HDMI Initializateion Step B.2 */ |
| ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, &hdmi->previous_mode); |
| if (ret) |
| return ret; |
| hdmi->phy.enabled = true; |
| |
| /* HDMI Initialization Step B.3 */ |
| dw_hdmi_enable_video_path(hdmi); |
| |
| if (hdmi->sink_has_audio) { |
| dev_dbg(hdmi->dev, "sink has audio support\n"); |
| |
| /* HDMI Initialization Step E - Configure audio */ |
| hdmi_clk_regenerator_update_pixel_clock(hdmi); |
| hdmi_enable_audio_clk(hdmi); |
| } |
| |
| /* not for DVI mode */ |
| if (hdmi->sink_is_hdmi) { |
| dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__); |
| |
| /* HDMI Initialization Step F - Configure AVI InfoFrame */ |
| hdmi_config_AVI(hdmi, mode); |
| hdmi_config_vendor_specific_infoframe(hdmi, mode); |
| } else { |
| dev_dbg(hdmi->dev, "%s DVI mode\n", __func__); |
| } |
| |
| hdmi_video_packetize(hdmi); |
| hdmi_video_csc(hdmi); |
| hdmi_video_sample(hdmi); |
| hdmi_tx_hdcp_config(hdmi); |
| |
| dw_hdmi_clear_overflow(hdmi); |
| if (hdmi->cable_plugin && hdmi->sink_is_hdmi) |
| hdmi_enable_overflow_interrupts(hdmi); |
| |
| return 0; |
| } |
| |
| static void dw_hdmi_setup_i2c(struct dw_hdmi *hdmi) |
| { |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL, |
| HDMI_PHY_I2CM_INT_ADDR); |
| |
| hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL | |
| HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL, |
| HDMI_PHY_I2CM_CTLINT_ADDR); |
| } |
| |
| static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi) |
| { |
| u8 ih_mute; |
| |
| /* |
| * Boot up defaults are: |
| * HDMI_IH_MUTE = 0x03 (disabled) |
| * HDMI_IH_MUTE_* = 0x00 (enabled) |
| * |
| * Disable top level interrupt bits in HDMI block |
| */ |
| ih_mute = hdmi_readb(hdmi, HDMI_IH_MUTE) | |
| HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT | |
| HDMI_IH_MUTE_MUTE_ALL_INTERRUPT; |
| |
| hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE); |
| |
| /* by default mask all interrupts */ |
| hdmi_writeb(hdmi, 0xff, HDMI_VP_MASK); |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK0); |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK1); |
| hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK2); |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_MASK0); |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_INT_ADDR); |
| hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_CTLINT_ADDR); |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_INT); |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_SPDIFINT); |
| hdmi_writeb(hdmi, 0xff, HDMI_AUD_HBR_MASK); |
| hdmi_writeb(hdmi, 0xff, HDMI_GP_MASK); |
| hdmi_writeb(hdmi, 0xff, HDMI_A_APIINTMSK); |
| hdmi_writeb(hdmi, 0xff, HDMI_CEC_MASK); |
| hdmi_writeb(hdmi, 0xff, HDMI_I2CM_INT); |
| hdmi_writeb(hdmi, 0xff, HDMI_I2CM_CTLINT); |
| |
| /* Disable interrupts in the IH_MUTE_* registers */ |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT1); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT2); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AS_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_PHY_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CM_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_CEC_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_VP_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CMPHY_STAT0); |
| hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AHBDMAAUD_STAT0); |
| |
| /* Enable top level interrupt bits in HDMI block */ |
| ih_mute &= ~(HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT | |
| HDMI_IH_MUTE_MUTE_ALL_INTERRUPT); |
| hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE); |
| } |
| |
| static void dw_hdmi_poweron(struct dw_hdmi *hdmi) |
| { |
| hdmi->bridge_is_on = true; |
| dw_hdmi_setup(hdmi, &hdmi->previous_mode); |
| } |
| |
| static void dw_hdmi_poweroff(struct dw_hdmi *hdmi) |
| { |
| if (hdmi->phy.enabled) { |
| hdmi->phy.ops->disable(hdmi, hdmi->phy.data); |
| hdmi->phy.enabled = false; |
| } |
| |
| hdmi->bridge_is_on = false; |
| } |
| |
| static void dw_hdmi_update_power(struct dw_hdmi *hdmi) |
| { |
| int force = hdmi->force; |
| |
| if (hdmi->disabled) { |
| force = DRM_FORCE_OFF; |
| } else if (force == DRM_FORCE_UNSPECIFIED) { |
| if (hdmi->rxsense) |
| force = DRM_FORCE_ON; |
| else |
| force = DRM_FORCE_OFF; |
| } |
| |
| if (force == DRM_FORCE_OFF) { |
| if (hdmi->bridge_is_on) |
| dw_hdmi_poweroff(hdmi); |
| } else { |
| if (!hdmi->bridge_is_on) |
| dw_hdmi_poweron(hdmi); |
| } |
| } |
| |
| /* |
| * Adjust the detection of RXSENSE according to whether we have a forced |
| * connection mode enabled, or whether we have been disabled. There is |
| * no point processing RXSENSE interrupts if we have a forced connection |
| * state, or DRM has us disabled. |
| * |
| * We also disable rxsense interrupts when we think we're disconnected |
| * to avoid floating TDMS signals giving false rxsense interrupts. |
| * |
| * Note: we still need to listen for HPD interrupts even when DRM has us |
| * disabled so that we can detect a connect event. |
| */ |
| static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi) |
| { |
| if (hdmi->phy.ops->update_hpd) |
| hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data, |
| hdmi->force, hdmi->disabled, |
| hdmi->rxsense); |
| } |
| |
| static enum drm_connector_status |
| dw_hdmi_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, |
| connector); |
| |
| mutex_lock(&hdmi->mutex); |
| hdmi->force = DRM_FORCE_UNSPECIFIED; |
| dw_hdmi_update_power(hdmi); |
| dw_hdmi_update_phy_mask(hdmi); |
| mutex_unlock(&hdmi->mutex); |
| |
| return hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data); |
| } |
| |
| static int dw_hdmi_connector_get_modes(struct drm_connector *connector) |
| { |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, |
| connector); |
| struct edid *edid; |
| int ret = 0; |
| |
| if (!hdmi->ddc) |
| return 0; |
| |
| edid = drm_get_edid(connector, hdmi->ddc); |
| if (edid) { |
| dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n", |
| edid->width_cm, edid->height_cm); |
| |
| hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); |
| hdmi->sink_has_audio = drm_detect_monitor_audio(edid); |
| drm_mode_connector_update_edid_property(connector, edid); |
| ret = drm_add_edid_modes(connector, edid); |
| /* Store the ELD */ |
| drm_edid_to_eld(connector, edid); |
| kfree(edid); |
| } else { |
| dev_dbg(hdmi->dev, "failed to get edid\n"); |
| } |
| |
| return ret; |
| } |
| |
| static enum drm_mode_status |
| dw_hdmi_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct dw_hdmi *hdmi = container_of(connector, |
| struct dw_hdmi, connector); |
| enum drm_mode_status mode_status = MODE_OK; |
| |
| /* We don't support double-clocked modes */ |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) |
| return MODE_BAD; |
| |
| if (hdmi->plat_data->mode_valid) |
| mode_status = hdmi->plat_data->mode_valid(connector, mode); |
| |
| return mode_status; |
| } |
| |
| static void dw_hdmi_connector_force(struct drm_connector *connector) |
| { |
| struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, |
| connector); |
| |
| mutex_lock(&hdmi->mutex); |
| hdmi->force = connector->force; |
| dw_hdmi_update_power(hdmi); |
| dw_hdmi_update_phy_mask(hdmi); |
| mutex_unlock(&hdmi->mutex); |
| } |
| |
| static const struct drm_connector_funcs dw_hdmi_connector_funcs = { |
| .dpms = drm_atomic_helper_connector_dpms, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .detect = dw_hdmi_connector_detect, |
| .destroy = drm_connector_cleanup, |
| .force = dw_hdmi_connector_force, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = { |
| .get_modes = dw_hdmi_connector_get_modes, |
| .mode_valid = dw_hdmi_connector_mode_valid, |
| .best_encoder = drm_atomic_helper_best_encoder, |
| }; |
| |
| static int dw_hdmi_bridge_attach(struct drm_bridge *bridge) |
| { |
| struct dw_hdmi *hdmi = bridge->driver_private; |
| struct drm_encoder *encoder = bridge->encoder; |
| struct drm_connector *connector = &hdmi->connector; |
| |
| connector->interlace_allowed = 1; |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| |
| drm_connector_helper_add(connector, &dw_hdmi_connector_helper_funcs); |
| |
| drm_connector_init(bridge->dev, connector, &dw_hdmi_connector_funcs, |
| DRM_MODE_CONNECTOR_HDMIA); |
| |
| drm_mode_connector_attach_encoder(connector, encoder); |
| |
| return 0; |
| } |
| |
| static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge, |
| struct drm_display_mode *orig_mode, |
| struct drm_display_mode *mode) |
| { |
| struct dw_hdmi *hdmi = bridge->driver_private; |
| |
| mutex_lock(&hdmi->mutex); |
| |
| /* Store the display mode for plugin/DKMS poweron events */ |
| memcpy(&hdmi->previous_mode, mode, sizeof(hdmi->previous_mode)); |
| |
| mutex_unlock(&hdmi->mutex); |
| } |
| |
| static void dw_hdmi_bridge_disable(struct drm_bridge *bridge) |
| { |
| struct dw_hdmi *hdmi = bridge->driver_private; |
| |
| mutex_lock(&hdmi->mutex); |
| hdmi->disabled = true; |
| dw_hdmi_update_power(hdmi); |
| dw_hdmi_update_phy_mask(hdmi); |
| mutex_unlock(&hdmi->mutex); |
| } |
| |
| static void dw_hdmi_bridge_enable(struct drm_bridge *bridge) |
| { |
| struct dw_hdmi *hdmi = bridge->driver_private; |
| |
| mutex_lock(&hdmi->mutex); |
| hdmi->disabled = false; |
| dw_hdmi_update_power(hdmi); |
| dw_hdmi_update_phy_mask(hdmi); |
| mutex_unlock(&hdmi->mutex); |
| } |
| |
| static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = { |
| .attach = dw_hdmi_bridge_attach, |
| .enable = dw_hdmi_bridge_enable, |
| .disable = dw_hdmi_bridge_disable, |
| .mode_set = dw_hdmi_bridge_mode_set, |
| }; |
| |
| static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi) |
| { |
| struct dw_hdmi_i2c *i2c = hdmi->i2c; |
| unsigned int stat; |
| |
| stat = hdmi_readb(hdmi, HDMI_IH_I2CM_STAT0); |
| if (!stat) |
| return IRQ_NONE; |
| |
| hdmi_writeb(hdmi, stat, HDMI_IH_I2CM_STAT0); |
| |
| i2c->stat = stat; |
| |
| complete(&i2c->cmp); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id) |
| { |
| struct dw_hdmi *hdmi = dev_id; |
| u8 intr_stat; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (hdmi->i2c) |
| ret = dw_hdmi_i2c_irq(hdmi); |
| |
| intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0); |
| if (intr_stat) { |
| hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); |
| return IRQ_WAKE_THREAD; |
| } |
| |
| return ret; |
| } |
| |
| void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense) |
| { |
| mutex_lock(&hdmi->mutex); |
| |
| if (!hdmi->force) { |
| /* |
| * If the RX sense status indicates we're disconnected, |
| * clear the software rxsense status. |
| */ |
| if (!rx_sense) |
| hdmi->rxsense = false; |
| |
| /* |
| * Only set the software rxsense status when both |
| * rxsense and hpd indicates we're connected. |
| * This avoids what seems to be bad behaviour in |
| * at least iMX6S versions of the phy. |
| */ |
| if (hpd) |
| hdmi->rxsense = true; |
| |
| dw_hdmi_update_power(hdmi); |
| dw_hdmi_update_phy_mask(hdmi); |
| } |
| mutex_unlock(&hdmi->mutex); |
| } |
| |
| void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense) |
| { |
| struct dw_hdmi *hdmi = dev_get_drvdata(dev); |
| |
| __dw_hdmi_setup_rx_sense(hdmi, hpd, rx_sense); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense); |
| |
| static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) |
| { |
| struct dw_hdmi *hdmi = dev_id; |
| u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat; |
| |
| intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0); |
| phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0); |
| phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0); |
| |
| phy_pol_mask = 0; |
| if (intr_stat & HDMI_IH_PHY_STAT0_HPD) |
| phy_pol_mask |= HDMI_PHY_HPD; |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0) |
| phy_pol_mask |= HDMI_PHY_RX_SENSE0; |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1) |
| phy_pol_mask |= HDMI_PHY_RX_SENSE1; |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2) |
| phy_pol_mask |= HDMI_PHY_RX_SENSE2; |
| if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3) |
| phy_pol_mask |= HDMI_PHY_RX_SENSE3; |
| |
| if (phy_pol_mask) |
| hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0); |
| |
| /* |
| * RX sense tells us whether the TDMS transmitters are detecting |
| * load - in other words, there's something listening on the |
| * other end of the link. Use this to decide whether we should |
| * power on the phy as HPD may be toggled by the sink to merely |
| * ask the source to re-read the EDID. |
| */ |
| if (intr_stat & |
| (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) |
| __dw_hdmi_setup_rx_sense(hdmi, |
| phy_stat & HDMI_PHY_HPD, |
| phy_stat & HDMI_PHY_RX_SENSE); |
| |
| if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { |
| dev_dbg(hdmi->dev, "EVENT=%s\n", |
| phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout"); |
| if (hdmi->bridge.dev) |
| drm_helper_hpd_irq_event(hdmi->bridge.dev); |
| } |
| |
| hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0); |
| hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE), |
| HDMI_IH_MUTE_PHY_STAT0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct dw_hdmi_phy_data dw_hdmi_phys[] = { |
| { |
| .type = DW_HDMI_PHY_DWC_HDMI_TX_PHY, |
| .name = "DWC HDMI TX PHY", |
| .gen = 1, |
| }, { |
| .type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC, |
| .name = "DWC MHL PHY + HEAC PHY", |
| .gen = 2, |
| .has_svsret = true, |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, |
| }, { |
| .type = DW_HDMI_PHY_DWC_MHL_PHY, |
| .name = "DWC MHL PHY", |
| .gen = 2, |
| .has_svsret = true, |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, |
| }, { |
| .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC, |
| .name = "DWC HDMI 3D TX PHY + HEAC PHY", |
| .gen = 2, |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, |
| }, { |
| .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY, |
| .name = "DWC HDMI 3D TX PHY", |
| .gen = 2, |
| .configure = hdmi_phy_configure_dwc_hdmi_3d_tx, |
| }, { |
| .type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY, |
| .name = "DWC HDMI 2.0 TX PHY", |
| .gen = 2, |
| .has_svsret = true, |
| }, { |
| .type = DW_HDMI_PHY_VENDOR_PHY, |
| .name = "Vendor PHY", |
| } |
| }; |
| |
| static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi) |
| { |
| unsigned int i; |
| u8 phy_type; |
| |
| phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID); |
| |
| if (phy_type == DW_HDMI_PHY_VENDOR_PHY) { |
| /* Vendor PHYs require support from the glue layer. */ |
| if (!hdmi->plat_data->phy_ops || !hdmi->plat_data->phy_name) { |
| dev_err(hdmi->dev, |
| "Vendor HDMI PHY not supported by glue layer\n"); |
| return -ENODEV; |
| } |
| |
| hdmi->phy.ops = hdmi->plat_data->phy_ops; |
| hdmi->phy.data = hdmi->plat_data->phy_data; |
| hdmi->phy.name = hdmi->plat_data->phy_name; |
| return 0; |
| } |
| |
| /* Synopsys PHYs are handled internally. */ |
| for (i = 0; i < ARRAY_SIZE(dw_hdmi_phys); ++i) { |
| if (dw_hdmi_phys[i].type == phy_type) { |
| hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops; |
| hdmi->phy.name = dw_hdmi_phys[i].name; |
| hdmi->phy.data = (void *)&dw_hdmi_phys[i]; |
| |
| if (!dw_hdmi_phys[i].configure && |
| !hdmi->plat_data->configure_phy) { |
| dev_err(hdmi->dev, "%s requires platform support\n", |
| hdmi->phy.name); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| } |
| |
| dev_err(hdmi->dev, "Unsupported HDMI PHY type (%02x)\n", phy_type); |
| return -ENODEV; |
| } |
| |
| static const struct regmap_config hdmi_regmap_8bit_config = { |
| .reg_bits = 32, |
| .val_bits = 8, |
| .reg_stride = 1, |
| .max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR, |
| }; |
| |
| static const struct regmap_config hdmi_regmap_32bit_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2, |
| }; |
| |
| static struct dw_hdmi * |
| __dw_hdmi_probe(struct platform_device *pdev, |
| const struct dw_hdmi_plat_data *plat_data) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct platform_device_info pdevinfo; |
| struct device_node *ddc_node; |
| struct dw_hdmi *hdmi; |
| struct resource *iores = NULL; |
| int irq; |
| int ret; |
| u32 val = 1; |
| u8 prod_id0; |
| u8 prod_id1; |
| u8 config0; |
| u8 config3; |
| |
| hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL); |
| if (!hdmi) |
| return ERR_PTR(-ENOMEM); |
| |
| hdmi->plat_data = plat_data; |
| hdmi->dev = dev; |
| hdmi->sample_rate = 48000; |
| hdmi->disabled = true; |
| hdmi->rxsense = true; |
| hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE); |
| |
| mutex_init(&hdmi->mutex); |
| mutex_init(&hdmi->audio_mutex); |
| spin_lock_init(&hdmi->audio_lock); |
| |
| ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0); |
| if (ddc_node) { |
| hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node); |
| of_node_put(ddc_node); |
| if (!hdmi->ddc) { |
| dev_dbg(hdmi->dev, "failed to read ddc node\n"); |
| return ERR_PTR(-EPROBE_DEFER); |
| } |
| |
| } else { |
| dev_dbg(hdmi->dev, "no ddc property found\n"); |
| } |
| |
| if (!plat_data->regm) { |
| const struct regmap_config *reg_config; |
| |
| of_property_read_u32(np, "reg-io-width", &val); |
| switch (val) { |
| case 4: |
| reg_config = &hdmi_regmap_32bit_config; |
| hdmi->reg_shift = 2; |
| break; |
| case 1: |
| reg_config = &hdmi_regmap_8bit_config; |
| break; |
| default: |
| dev_err(dev, "reg-io-width must be 1 or 4\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| hdmi->regs = devm_ioremap_resource(dev, iores); |
| if (IS_ERR(hdmi->regs)) { |
| ret = PTR_ERR(hdmi->regs); |
| goto err_res; |
| } |
| |
| hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config); |
| if (IS_ERR(hdmi->regm)) { |
| dev_err(dev, "Failed to configure regmap\n"); |
| ret = PTR_ERR(hdmi->regm); |
| goto err_res; |
| } |
| } else { |
| hdmi->regm = plat_data->regm; |
| } |
| |
| hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr"); |
| if (IS_ERR(hdmi->isfr_clk)) { |
| ret = PTR_ERR(hdmi->isfr_clk); |
| dev_err(hdmi->dev, "Unable to get HDMI isfr clk: %d\n", ret); |
| goto err_res; |
| } |
| |
| ret = clk_prepare_enable(hdmi->isfr_clk); |
| if (ret) { |
| dev_err(hdmi->dev, "Cannot enable HDMI isfr clock: %d\n", ret); |
| goto err_res; |
| } |
| |
| hdmi->iahb_clk = devm_clk_get(hdmi->dev, "iahb"); |
| if (IS_ERR(hdmi->iahb_clk)) { |
| ret = PTR_ERR(hdmi->iahb_clk); |
| dev_err(hdmi->dev, "Unable to get HDMI iahb clk: %d\n", ret); |
| goto err_isfr; |
| } |
| |
| ret = clk_prepare_enable(hdmi->iahb_clk); |
| if (ret) { |
| dev_err(hdmi->dev, "Cannot enable HDMI iahb clock: %d\n", ret); |
| goto err_isfr; |
| } |
| |
| /* Product and revision IDs */ |
| hdmi->version = (hdmi_readb(hdmi, HDMI_DESIGN_ID) << 8) |
| | (hdmi_readb(hdmi, HDMI_REVISION_ID) << 0); |
| prod_id0 = hdmi_readb(hdmi, HDMI_PRODUCT_ID0); |
| prod_id1 = hdmi_readb(hdmi, HDMI_PRODUCT_ID1); |
| |
| if (prod_id0 != HDMI_PRODUCT_ID0_HDMI_TX || |
| (prod_id1 & ~HDMI_PRODUCT_ID1_HDCP) != HDMI_PRODUCT_ID1_HDMI_TX) { |
| dev_err(dev, "Unsupported HDMI controller (%04x:%02x:%02x)\n", |
| hdmi->version, prod_id0, prod_id1); |
| ret = -ENODEV; |
| goto err_iahb; |
| } |
| |
| ret = dw_hdmi_detect_phy(hdmi); |
| if (ret < 0) |
| goto err_iahb; |
| |
| dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP (%s)\n", |
| hdmi->version >> 12, hdmi->version & 0xfff, |
| prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without", |
| hdmi->phy.name); |
| |
| initialize_hdmi_ih_mutes(hdmi); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| ret = irq; |
| goto err_iahb; |
| } |
| |
| ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq, |
| dw_hdmi_irq, IRQF_SHARED, |
| dev_name(dev), hdmi); |
| if (ret) |
| goto err_iahb; |
| |
| /* |
| * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator |
| * N and cts values before enabling phy |
| */ |
| hdmi_init_clk_regenerator(hdmi); |
| |
| /* If DDC bus is not specified, try to register HDMI I2C bus */ |
| if (!hdmi->ddc) { |
| hdmi->ddc = dw_hdmi_i2c_adapter(hdmi); |
| if (IS_ERR(hdmi->ddc)) |
| hdmi->ddc = NULL; |
| } |
| |
| hdmi->bridge.driver_private = hdmi; |
| hdmi->bridge.funcs = &dw_hdmi_bridge_funcs; |
| #ifdef CONFIG_OF |
| hdmi->bridge.of_node = pdev->dev.of_node; |
| #endif |
| |
| dw_hdmi_setup_i2c(hdmi); |
| if (hdmi->phy.ops->setup_hpd) |
| hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data); |
| |
| memset(&pdevinfo, 0, sizeof(pdevinfo)); |
| pdevinfo.parent = dev; |
| pdevinfo.id = PLATFORM_DEVID_AUTO; |
| |
| config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID); |
| config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID); |
| |
| if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) { |
| struct dw_hdmi_audio_data audio; |
| |
| audio.phys = iores->start; |
| audio.base = hdmi->regs; |
| audio.irq = irq; |
| audio.hdmi = hdmi; |
| audio.eld = hdmi->connector.eld; |
| |
| pdevinfo.name = "dw-hdmi-ahb-audio"; |
| pdevinfo.data = &audio; |
| pdevinfo.size_data = sizeof(audio); |
| pdevinfo.dma_mask = DMA_BIT_MASK(32); |
| hdmi->audio = platform_device_register_full(&pdevinfo); |
| } else if (config0 & HDMI_CONFIG0_I2S) { |
| struct dw_hdmi_i2s_audio_data audio; |
| |
| audio.hdmi = hdmi; |
| audio.write = hdmi_writeb; |
| audio.read = hdmi_readb; |
| |
| pdevinfo.name = "dw-hdmi-i2s-audio"; |
| pdevinfo.data = &audio; |
| pdevinfo.size_data = sizeof(audio); |
| pdevinfo.dma_mask = DMA_BIT_MASK(32); |
| hdmi->audio = platform_device_register_full(&pdevinfo); |
| } |
| |
| /* Reset HDMI DDC I2C master controller and mute I2CM interrupts */ |
| if (hdmi->i2c) |
| dw_hdmi_i2c_init(hdmi); |
| |
| platform_set_drvdata(pdev, hdmi); |
| |
| return hdmi; |
| |
| err_iahb: |
| if (hdmi->i2c) { |
| i2c_del_adapter(&hdmi->i2c->adap); |
| hdmi->ddc = NULL; |
| } |
| |
| clk_disable_unprepare(hdmi->iahb_clk); |
| err_isfr: |
| clk_disable_unprepare(hdmi->isfr_clk); |
| err_res: |
| i2c_put_adapter(hdmi->ddc); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static void __dw_hdmi_remove(struct dw_hdmi *hdmi) |
| { |
| if (hdmi->audio && !IS_ERR(hdmi->audio)) |
| platform_device_unregister(hdmi->audio); |
| |
| /* Disable all interrupts */ |
| hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); |
| |
| clk_disable_unprepare(hdmi->iahb_clk); |
| clk_disable_unprepare(hdmi->isfr_clk); |
| |
| if (hdmi->i2c) |
| i2c_del_adapter(&hdmi->i2c->adap); |
| else |
| i2c_put_adapter(hdmi->ddc); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Probe/remove API, used from platforms based on the DRM bridge API. |
| */ |
| int dw_hdmi_probe(struct platform_device *pdev, |
| const struct dw_hdmi_plat_data *plat_data) |
| { |
| struct dw_hdmi *hdmi; |
| int ret; |
| |
| hdmi = __dw_hdmi_probe(pdev, plat_data); |
| if (IS_ERR(hdmi)) |
| return PTR_ERR(hdmi); |
| |
| ret = drm_bridge_add(&hdmi->bridge); |
| if (ret < 0) { |
| __dw_hdmi_remove(hdmi); |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_probe); |
| |
| void dw_hdmi_remove(struct platform_device *pdev) |
| { |
| struct dw_hdmi *hdmi = platform_get_drvdata(pdev); |
| |
| drm_bridge_remove(&hdmi->bridge); |
| |
| __dw_hdmi_remove(hdmi); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_remove); |
| |
| /* ----------------------------------------------------------------------------- |
| * Bind/unbind API, used from platforms based on the component framework. |
| */ |
| int dw_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder, |
| const struct dw_hdmi_plat_data *plat_data) |
| { |
| struct dw_hdmi *hdmi; |
| int ret; |
| |
| hdmi = __dw_hdmi_probe(pdev, plat_data); |
| if (IS_ERR(hdmi)) |
| return PTR_ERR(hdmi); |
| |
| ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL); |
| if (ret) { |
| dw_hdmi_remove(pdev); |
| DRM_ERROR("Failed to initialize bridge with drm\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_bind); |
| |
| void dw_hdmi_unbind(struct device *dev) |
| { |
| struct dw_hdmi *hdmi = dev_get_drvdata(dev); |
| |
| __dw_hdmi_remove(hdmi); |
| } |
| EXPORT_SYMBOL_GPL(dw_hdmi_unbind); |
| |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |
| MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>"); |
| MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>"); |
| MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>"); |
| MODULE_DESCRIPTION("DW HDMI transmitter driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:dw-hdmi"); |