Merge branch 'for_2.6.34rc_a' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index f5c6e11..881faea 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -661,7 +661,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index ea9a501..5e55b55 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -680,7 +680,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index a0a2a11..504d2bd 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -96,6 +96,7 @@
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+ omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bb4018b..e15d2e8 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -96,7 +96,7 @@
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
- .id = 3,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ca95d8d..6b39849 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -280,7 +280,6 @@
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
- omap_serial_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index da77930..3771254 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -115,7 +115,6 @@
}
};
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
@@ -128,23 +127,12 @@
}
};
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
- serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-#else
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-}
-#endif
-
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
- if (cpu_is_omap3630() || cpu_is_omap44xx())
- omap2_set_globals_uart4(omap2_globals);
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static inline unsigned int __serial_read_reg(struct uart_port *up,
@@ -550,7 +538,7 @@
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
- printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ dev_err(dev, "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
@@ -664,27 +652,33 @@
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
+ /* Don't map zero-based physical address */
+ if (p->mapbase == 0) {
+ dev_warn(dev, "no physical address for uart#%d,"
+ " so skipping early_init...\n", i);
+ continue;
+ }
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
- printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+ dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
- printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
+ dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
- printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
+ dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
@@ -727,6 +721,13 @@
pdev = &uart->pdev;
dev = &pdev->dev;
+ /* Don't proceed if there's no clocks available */
+ if (unlikely(!uart->ick || !uart->fck)) {
+ WARN(1, "%s: can't init uart%d, no clocks available\n",
+ kobject_name(&dev->kobj), port);
+ return;
+ }
+
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);