usb: host: ehci: make use of new usb_endpoint_maxp_mult()
We have introduced a helper to calculate multiplier
value from wMaxPacketSize. Start using it.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index eca3710..a45a5dc 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -550,8 +550,6 @@
/*-------------------------------------------------------------------------*/
-// high bandwidth multiplier, as encoded in highspeed endpoint descriptors
-#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
// ... and packet size, for any kind of endpoint descriptor
#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
@@ -770,9 +768,11 @@
gfp_t flags
) {
struct ehci_qh *qh = ehci_qh_alloc (ehci, flags);
+ struct usb_host_endpoint *ep;
u32 info1 = 0, info2 = 0;
int is_input, type;
int maxp = 0;
+ int mult;
struct usb_tt *tt = urb->dev->tt;
struct ehci_qh_hw *hw;
@@ -787,7 +787,9 @@
is_input = usb_pipein (urb->pipe);
type = usb_pipetype (urb->pipe);
+ ep = usb_pipe_endpoint (urb->dev, urb->pipe);
maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input);
+ mult = usb_endpoint_maxp_mult (&ep->desc);
/* 1024 byte maxpacket is a hardware ceiling. High bandwidth
* acts like up to 3KB, but is built from smaller packets.
@@ -810,7 +812,7 @@
qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
is_input, 0,
- hb_mult(maxp) * max_packet(maxp)));
+ mult * max_packet(maxp)));
qh->ps.phase = NO_FRAME;
if (urb->dev->speed == USB_SPEED_HIGH) {
@@ -929,7 +931,7 @@
info2 |= (EHCI_TUNE_MULT_HS << 30);
} else { /* PIPE_INTERRUPT */
info1 |= max_packet (maxp) << 16;
- info2 |= hb_mult (maxp) << 30;
+ info2 |= mult << 30;
}
break;
default: