USB: kobil_sct.h: checkpatch cleanups
Minor whitespace cleanups to make checkpatch happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
index a51fbb5..be207f7 100644
--- a/drivers/usb/serial/kobil_sct.h
+++ b/drivers/usb/serial/kobil_sct.h
@@ -23,38 +23,55 @@
#define SUSBCR_SSL_SETDTR 0x0004
#define SUSBCR_SSL_CLRDTR 0x0010
-#define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port.
-#define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port.
-#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there.
-#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there.
+/* Kill the pending/current writes to the comm port. */
+#define SUSBCR_SSL_PURGE_TXABORT 0x0100
+/* Kill the pending/current reads to the comm port. */
+#define SUSBCR_SSL_PURGE_RXABORT 0x0200
+/* Kill the transmit queue if there. */
+#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400
+/* Kill the typeahead buffer if there. */
+#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800
#define SUSBCRequest_GetStatusLineState 4
-#define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received
-#define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty
-#define SUSBCR_GSL_CTS 0x0008 // CTS changed state
-#define SUSBCR_GSL_DSR 0x0010 // DSR changed state
-#define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state
-#define SUSBCR_GSL_BREAK 0x0040 // BREAK received
-#define SUSBCR_GSL_ERR 0x0080 // Line status error occurred
-#define SUSBCR_GSL_RING 0x0100 // Ring signal detected
+/* Any Character received */
+#define SUSBCR_GSL_RXCHAR 0x0001
+/* Transmitt Queue Empty */
+#define SUSBCR_GSL_TXEMPTY 0x0004
+/* CTS changed state */
+#define SUSBCR_GSL_CTS 0x0008
+/* DSR changed state */
+#define SUSBCR_GSL_DSR 0x0010
+/* RLSD changed state */
+#define SUSBCR_GSL_RLSD 0x0020
+/* BREAK received */
+#define SUSBCR_GSL_BREAK 0x0040
+/* Line status error occurred */
+#define SUSBCR_GSL_ERR 0x0080
+/* Ring signal detected */
+#define SUSBCR_GSL_RING 0x0100
#define SUSBCRequest_Misc 8
-#define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence
-#define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues
+/* use a predefined reset sequence */
+#define SUSBCR_MSC_ResetReader 0x0001
+/* use a predefined sequence to reset the internal queues */
+#define SUSBCR_MSC_ResetAllQueues 0x0002
#define SUSBCRequest_GetMisc 0x10
-#define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device,
- coded like this 0xHHLLBBPP
- with HH = Firmware Version High Byte
- LL = Firmware Version Low Byte
- BB = Build Number
- PP = Further Attributes
- */
-#define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device
- coded like this 0xHHLLPPRR
- with HH = Software Version High Byte
- LL = Software Version Low Byte
- PP = Further Attributes
- RR = Reserved for the hardware ID
- */
+/*
+ * get the firmware version from device, coded like this 0xHHLLBBPP with
+ * HH = Firmware Version High Byte
+ * LL = Firmware Version Low Byte
+ * BB = Build Number
+ * PP = Further Attributes
+ */
+#define SUSBCR_MSC_GetFWVersion 0x0001
+
+/*
+ * get the hardware version from device coded like this 0xHHLLPPRR with
+ * HH = Software Version High Byte
+ * LL = Software Version Low Byte
+ * PP = Further Attributes
+ * RR = Reserved for the hardware ID
+ */
+#define SUSBCR_MSC_GetHWVersion 0x0002