drm/i915/vlv: Make the vlv_dpio_read/vlv_dpio_write more PHY centric
vlv_dpio_read/write should be describe more in PHY centric instead of
display controller centric.
Create a enum dpio_channel for channel index and enum dpio_phy for PHY
index. This should better to gather for upcoming platform.
v2: Rebase the code based on
drm/i915/vlv: Fix typo in the DPIO register define.
v3: Rename vlv_phy to dpio_phy_iosf_port and define additional macro
DPIO_PHY, and remove unrelated change. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index efca30d..c546316 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -88,6 +88,18 @@
};
#define port_name(p) ((p) + 'A')
+#define I915_NUM_PHYS_VLV 1
+
+enum dpio_channel {
+ DPIO_CH0,
+ DPIO_CH1
+};
+
+enum dpio_phy {
+ DPIO_PHY0,
+ DPIO_PHY1
+};
+
enum intel_display_power_domain {
POWER_DOMAIN_PIPE_A,
POWER_DOMAIN_PIPE_B,
@@ -1403,6 +1415,7 @@
int num_shared_dpll;
struct intel_shared_dpll shared_dplls[I915_NUM_PLLS];
struct intel_ddi_plls ddi_plls;
+ int dpio_phy_iosf_port[I915_NUM_PHYS_VLV];
/* Reclocking support */
bool render_reclock_avail;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2926563..a8a5bcb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -452,6 +452,9 @@
#define DPIO_SFR_BYPASS (1<<1)
#define DPIO_CMNRST (1<<0)
+#define DPIO_PHY(pipe) ((pipe) >> 1)
+#define DPIO_PHY_IOSF_PORT(phy) (dev_priv->dpio_phy_iosf_port[phy])
+
/*
* Per pipe/PLL DPIO regs
*/
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index abf509c..752d830 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1361,6 +1361,7 @@
if (!IS_VALLEYVIEW(dev))
return;
+ DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
/*
* From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
* 6. De-assert cmn_reset/side_reset. Same as VLV X0.
@@ -1494,18 +1495,25 @@
POSTING_READ(DPLL(pipe));
}
-void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *dport)
{
u32 port_mask;
- if (!port)
+ switch (dport->port) {
+ case PORT_B:
port_mask = DPLL_PORTB_READY_MASK;
- else
+ break;
+ case PORT_C:
port_mask = DPLL_PORTC_READY_MASK;
+ break;
+ default:
+ BUG();
+ }
if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
- 'B' + port, I915_READ(DPLL(0)));
+ 'B' + dport->port, I915_READ(DPLL(0)));
}
/**
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2584eb4..34d6057 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1839,7 +1839,7 @@
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
struct edp_power_seq power_seq;
u32 val;
@@ -1866,7 +1866,7 @@
intel_enable_dp(encoder);
- vlv_wait_port_ready(dev_priv, port);
+ vlv_wait_port_ready(dev_priv, dport);
}
static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
@@ -1876,7 +1876,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
/* Program Tx lane resets to default */
@@ -2033,7 +2033,7 @@
unsigned long demph_reg_value, preemph_reg_value,
uniqtranscale_reg_value;
uint8_t train_set = intel_dp->train_set[0];
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 6d701e7..9134a54 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -490,9 +490,9 @@
{
switch (dport->port) {
case PORT_B:
- return 0;
+ return DPIO_CH0;
case PORT_C:
- return 1;
+ return DPIO_CH1;
default:
BUG();
}
@@ -637,7 +637,8 @@
void intel_wait_for_vblank(struct drm_device *dev, int pipe);
void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
-void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port);
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *dport);
bool intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_display_mode *mode,
struct intel_load_detect_pipe *old);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 5b9143f..61cff67 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1081,7 +1081,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
u32 val;
@@ -1116,7 +1116,7 @@
intel_enable_hdmi(encoder);
- vlv_wait_port_ready(dev_priv, port);
+ vlv_wait_port_ready(dev_priv, dport);
}
static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
@@ -1126,7 +1126,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
if (!IS_VALLEYVIEW(dev))
@@ -1159,7 +1159,7 @@
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
- int port = vlv_dport_to_channel(dport);
+ enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
/* Reset lanes to avoid HDMI flicker (VLV w/a) */
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index d43e457..cc6fbcd 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -176,27 +176,18 @@
PUNIT_OPCODE_REG_WRITE, reg, &val);
}
-static u32 vlv_get_phy_port(enum pipe pipe)
-{
- u32 port = IOSF_PORT_DPIO;
-
- WARN_ON ((pipe != PIPE_A) && (pipe != PIPE_B));
-
- return port;
-}
-
u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg)
{
u32 val = 0;
- vlv_sideband_rw(dev_priv, DPIO_DEVFN, vlv_get_phy_port(pipe),
+ vlv_sideband_rw(dev_priv, DPIO_DEVFN, DPIO_PHY_IOSF_PORT(DPIO_PHY(pipe)),
DPIO_OPCODE_REG_READ, reg, &val);
return val;
}
void vlv_dpio_write(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 val)
{
- vlv_sideband_rw(dev_priv, DPIO_DEVFN, vlv_get_phy_port(pipe),
+ vlv_sideband_rw(dev_priv, DPIO_DEVFN, DPIO_PHY_IOSF_PORT(DPIO_PHY(pipe)),
DPIO_OPCODE_REG_WRITE, reg, &val);
}