Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index d2f9033..4873c75 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -128,3 +128,17 @@
preferred request size for workloads where sustained
throughput is desired. If no optimal I/O size is
reported this file contains 0.
+
+What: /sys/block/<disk>/queue/nomerges
+Date: January 2010
+Contact:
+Description:
+ Standard I/O elevator operations include attempts to
+ merge contiguous I/Os. For known random I/O loads these
+ attempts will always fail and result in extra cycles
+ being spent in the kernel. This allows one to turn off
+ this behavior on one of two ways: When set to 1, complex
+ merge checks are disabled, but the simple one-shot merges
+ with the previous I/O request are enabled. When set to 2,
+ all merge tries are disabled. The default value is 0 -
+ which enables all types of merge tries.
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 9d58c7c5..eb0fae1 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -59,7 +59,11 @@
This maps the platforms RAM, and typically
maps all platform RAM in a 1:1 relationship.
-TASK_SIZE PAGE_OFFSET-1 Kernel module space
+PKMAP_BASE PAGE_OFFSET-1 Permanent kernel mappings
+ One way of mapping HIGHMEM pages into kernel
+ space.
+
+MODULES_VADDR MODULES_END-1 Kernel module space
Kernel modules inserted via insmod are
placed here using dynamic mappings.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index e164403..f652740 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -25,11 +25,11 @@
nomerges (RW)
-------------
-This enables the user to disable the lookup logic involved with IO merging
-requests in the block layer. Merging may still occur through a direct
-1-hit cache, since that comes for (almost) free. The IO scheduler will not
-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
-to 0, enabling all merges.
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
nr_requests (RW)
----------------
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index b231414..2b5f823 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -88,12 +88,12 @@
This is used primarily during fault processing.
5) void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
- described by "pte" now exists at virtual address "address"
- for address space "vma->vm_mm", in the software page tables.
+ now exists at virtual address "address" for address space
+ "vma->vm_mm", in the software page tables.
A port may use this information in any way it so chooses.
For example, it could use this event to pre-load TLB
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0a4fd4..73ef30d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -520,6 +520,29 @@
----------------------------
+What: corgikbd, spitzkbd, tosakbd driver
+When: 2.6.35
+Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
+Why: We now have a generic GPIO based matrix keyboard driver that
+ are fully capable of handling all the keys on these devices.
+ The original drivers manipulate the GPIO registers directly
+ and so are difficult to maintain.
+Who: Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
+What: corgi_ssp and corgi_ts driver
+When: 2.6.35
+Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c
+Why: The corgi touchscreen is now deprecated in favour of the generic
+ ads7846.c driver. The noise reduction technique used in corgi_ts.c,
+ that's to wait till vsync before ADC sampling, is also integrated into
+ ads7846 driver now. Provided that the original driver is not generic
+ and is difficult to maintain, it will be removed later.
+Who: Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
What: capifs
When: February 2011
Files: drivers/isdn/capi/capifs.*
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index f7160a2..b35affd 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -1,5 +1,5 @@
-Copyright (C) 2002-2008 Sentelic Corporation.
-Last update: Oct-31-2008
+Copyright (C) 2002-2010 Sentelic Corporation.
+Last update: Jan-13-2010
==============================================================================
* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -44,7 +44,7 @@
Packet 1
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|l|r|u|d|
+ 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d|
|---------------| |---------------| |---------------| |---------------|
Byte 1: Bit7 => Y overflow
@@ -59,15 +59,15 @@
Byte 3: Y Movement(9-bit 2's complement integers)
Byte 4: Bit0 => the Vertical scrolling movement downward.
Bit1 => the Vertical scrolling movement upward.
- Bit2 => the Vertical scrolling movement rightward.
- Bit3 => the Vertical scrolling movement leftward.
+ Bit2 => the Horizontal scrolling movement leftward.
+ Bit3 => the Horizontal scrolling movement rightward.
Bit4 => 1 = 4th mouse button is pressed, Forward one page.
0 = 4th mouse button is not pressed.
Bit5 => 1 = 5th mouse button is pressed, Backward one page.
0 = 5th mouse button is not pressed.
C) MSID 7:
-# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
+# FSP uses 2 packets (8 Bytes) to represent Absolute Position.
so we have PACKET NUMBER to identify packets.
If PACKET NUMBER is 0, the packet is Packet 1.
If PACKET NUMBER is 1, the packet is Packet 2.
@@ -129,7 +129,7 @@
Byte 4: Bit7~Bit0 => Don't Care
==============================================================================
-* Absolute position for STL3888-A0.
+* Absolute position for STL3888-Ax.
==============================================================================
Packet 1 (ABSOLUTE POSITION)
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
@@ -179,14 +179,14 @@
Bit5~Bit4 => y2_g
Bit7~Bit6 => x2_g
-Notify Packet for STL3888-A0
+Notify Packet for STL3888-Ax
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0|
|---------------| |---------------| |---------------| |---------------|
Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
+ => 01, Absolute coordinates packet
=> 10, Notify packet
Bit5 => 1
Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
@@ -205,15 +205,106 @@
Bit6 => scroll left button
Bit5 => scroll down button
Bit4 => scroll up button
- * Note that if gesture and additional button (Bit4~Bit7)
- happen at the same time, the button information will not
- be sent.
+ * Note that if gesture and additional buttoni (Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
Bit3~Bit0 => Reserved
Sample sequence of Multi-finger, Multi-coordinate mode:
notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
- abs pkt 2, ..., notify packet(valid bit == 0)
+ abs pkt 2, ..., notify packet (valid bit == 0)
+
+==============================================================================
+* Absolute position for STL3888-B0.
+==============================================================================
+Packet 1(ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Packet 2 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Notify Packet for STL3888-B0
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => 1
+ Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+ 0: left button is generated by the on-pad command
+ 1: left button is generated by the external button
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+Byte 3: Bit7~Bit6 => Don't care
+ Bit5~Bit4 => Number of fingers
+ Bit3~Bit1 => Reserved
+ Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+Byte 4: Bit7 => scroll right button
+ Bit6 => scroll left button
+ Bit5 => scroll up button
+ Bit4 => scroll down button
+ * Note that if gesture and additional button(Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
+ Bit3~Bit0 => Reserved
+
+Sample sequence of Multi-finger, Multi-coordinate mode:
+
+ notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
+ abs pkt 2, ..., notify packet (valid bit == 0)
==============================================================================
* FSP Enable/Disable packet
@@ -409,7 +500,8 @@
0: read only, 1: read/write enable
(Note that following registers does not require clock gating being
enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
- 40 41 42 43.)
+ 40 41 42 43. In addition to that, this bit must be 1 when gesture
+ mode is enabled)
0x31 RW on-pad command detection
bit7 0 RW on-pad command left button down tag
@@ -463,6 +555,10 @@
absolute coordinates; otherwise, host only receives packets with
relative coordinate.)
+ bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd
+ finger packet enable
+ 0: disable, 1: enable
+
0x43 RW on-pad control
bit0 0 RW on-pad control enable
0: disable, 1: enable
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597..33df82e 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -482,6 +482,9 @@
reference_rate - reference sample rate, 44100 or 48000 (default)
multiple - multiple to ref. sample rate, 1 or 2 (default)
+ subsystem - override the PCI SSID for probing; the value
+ consists of SSVID << 16 | SSDID. The default is
+ zero, which means no override.
This module supports multiple cards.
@@ -1123,6 +1126,21 @@
This module supports multiple cards, autoprobe and ISA PnP.
+ Module snd-jazz16
+ -------------------
+
+ Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+ MVD1216 + MVA416 + MVA514.
+
+ port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ irq - IRQ # for SB DSP chip (3,5,7,9,10,15)
+ dma8 - DMA # for SB DSP chip (1,3)
+ dma16 - DMA # for SB DSP chip (5,7)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (2,3,5,7)
+
+ This module supports multiple cards.
+
Module snd-korg1212
-------------------
@@ -1791,6 +1809,13 @@
The power-management is supported.
+ Module snd-ua101
+ ----------------
+
+ Module for the Edirol UA-101 audio/MIDI interface.
+
+ This module supports multiple devices, autoprobe and hotplugging.
+
Module snd-usb-audio
--------------------
@@ -1923,7 +1948,7 @@
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
- i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+ i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
(Deluxe) and Essence STX.
This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e72cee9..1d38b0d 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -124,6 +124,8 @@
asus-a7m ASUS A7M
macpro MacPro support
mb5 Macbook 5,1
+ macmini3 Macmini 3,1
+ mba21 Macbook Air 2,1
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
imac91 iMac 9,1
@@ -279,13 +281,16 @@
laptop Basic Laptop config (default)
hp HP Spartan laptop
hp-dv6736 HP dv6736
+ hp-f700 HP Compaq Presario F700
lenovo-x200 Lenovo X200 laptop
+ toshiba Toshiba Satellite M300
Conexant 5066
=============
laptop Basic Laptop config (default)
dell-laptop Dell laptops
olpc-xo-1_5 OLPC XO 1.5
+ ideapad Lenovo IdeaPad U150
STAC9200
========
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 6325bec..f4dd3bf 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -452,6 +452,33 @@
sysfs entries, and the lines after `[hint]` are parsed as `hints`
sysfs entries, respectively.
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [vendor_id]
+ 0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [subsystem_id]
+ 0xffff1111
+
+ [revision_id]
+ 0x10
+
+ [chip_name]
+ My-own NEWS-0002
+------------------------------------------------------------------------
+
The hd-audio driver reads the file via request_firmware(). Thus,
a patch file has to be located on the appropriate firmware path,
typically, /lib/firmware. For example, when you pass the option
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f6..71a2432 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -329,7 +329,7 @@
* tables contain all the necessary information.
*/
extern inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 184a6bd..3b18128 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@
select HAVE_IDE
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
+ select GENERIC_ATOMIC64 if (!CPU_32v6K)
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
@@ -20,6 +21,8 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
+ select HAVE_PERF_EVENTS
+ select PERF_USE_VMALLOC
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -52,6 +55,9 @@
bool
select GENERIC_ALLOCATOR
+config HAVE_PROC_CPU
+ bool
+
config NO_IOPORT
bool
@@ -161,6 +167,11 @@
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
+config ARM_L1_CACHE_SHIFT_6
+ bool
+ help
+ Setting ARM L1 cache line size to 64 Bytes.
+
if OPROFILE
config OPROFILE_ARMV6
@@ -550,10 +561,20 @@
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+config ARCH_NUC93X
+ bool "Nuvoton NUC93X CPU"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+ low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
select HAVE_CLK
+ select COMMON_CLKDEV
help
This enables support for Philips PNX4008 mobile platform.
@@ -638,6 +659,7 @@
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
help
Samsung S5PC1XX series based systems
@@ -785,6 +807,8 @@
source "arch/arm/mach-ns9xxx/Kconfig"
+source "arch/arm/mach-nuc93x/Kconfig"
+
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
@@ -867,6 +891,11 @@
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
+config CPU_HAS_PMU
+ depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+ default y
+ bool
+
if !MMU
source "arch/arm/Kconfig-nommu"
endif
@@ -921,6 +950,19 @@
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
+config PL310_ERRATA_588369
+ bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+ depends on CACHE_L2X0 && ARCH_OMAP4
+ help
+ The PL310 L2 cache controller implements three types of Clean &
+ Invalidate maintenance operations: by Physical Address
+ (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+ They are architecturally defined to behave as the execution of a
+ clean operation followed immediately by an invalidate operation,
+ both performing to the same memory location. This functionality
+ is not correctly implemented in PL310 as clean lines are not
+ invalidated as a result of these operations. Note that this errata
+ uses Texas Instrument's secure monitor api.
endmenu
source "arch/arm/common/Kconfig"
@@ -1171,6 +1213,14 @@
depends on HIGHMEM
depends on !OUTER_CACHE
+config HW_PERF_EVENTS
+ bool "Enable hardware performance counter support for perf events"
+ depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+ default y
+ help
+ Enable hardware performance counter support for perf events. If
+ disabled, perf events will use software events only.
+
source "mm/Kconfig"
config LEDS
@@ -1230,6 +1280,7 @@
bool
depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
+ select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
naturally aligned on the bus, i.e., a 4 byte fetch must start at an
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 356d702..81f54ca 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -171,6 +171,7 @@
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
# Platform directory name. This list is sorted alphanumerically
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2d4d88b..97c89e7 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -5,7 +5,7 @@
#
HEAD = head.o
-OBJS = misc.o
+OBJS = misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
@@ -106,10 +106,6 @@
$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
$(call cmd,shipped)
-# Don't allow any static data in misc.o, which
-# would otherwise mess up our GOT table
-CFLAGS_misc.o := -Dstatic=
-
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
new file mode 100644
index 0000000..0da382f
--- /dev/null
+++ b/arch/arm/boot/compressed/decompress.c
@@ -0,0 +1,45 @@
+#define _LINUX_STRING_H_
+
+#include <linux/compiler.h> /* for inline */
+#include <linux/types.h> /* for size_t */
+#include <linux/stddef.h> /* for NULL */
+#include <linux/linkage.h>
+#include <asm/string.h>
+
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+extern void error(char *);
+
+#define STATIC static
+
+#define ARCH_HAS_DECOMP_WDOG
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+{
+ decompress(input, len, NULL, NULL, output, NULL, error);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4fddc50..99b75aa 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,13 +22,13 @@
#if defined(CONFIG_DEBUG_ICEDCC)
#ifdef CONFIG_CPU_V6
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_V7)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
wait: mrc p14, 0, pc, c0, c1, 0
@@ -36,13 +36,13 @@
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
@@ -58,7 +58,7 @@
.endm
#if defined(CONFIG_ARCH_SA1100)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
@@ -67,13 +67,13 @@
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
.endm
#else
- .macro loadsp, rb
- addruart \rb
+ .macro loadsp, rb, tmp
+ addruart \rb, \tmp
.endm
#endif
#endif
@@ -1025,7 +1025,7 @@
strb r2, [r3, r1]
b 1b
-puts: loadsp r3
+puts: loadsp r3, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@@ -1042,7 +1042,7 @@
putc:
mov r2, r0
mov r0, #0
- loadsp r3
+ loadsp r3, r1
b 2b
memdump: mov r12, r0
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 56a0d11..d32bc71 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,8 +23,8 @@
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
-#include <asm/string.h>
#include <linux/linkage.h>
+#include <asm/string.h>
#include <asm/unaligned.h>
@@ -117,57 +117,7 @@
#endif
-#define __ptr_t void *
-
-#define memzero(s,n) __memzero(s,n)
-
-/*
- * Optimised C version of memzero for the ARM.
- */
-void __memzero (__ptr_t s, size_t n)
-{
- union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
- int i;
-
- u.vp = s;
-
- for (i = n >> 5; i > 0; i--) {
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- }
-
- if (n & 1 << 4) {
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- }
-
- if (n & 1 << 3) {
- *u.ulp++ = 0;
- *u.ulp++ = 0;
- }
-
- if (n & 1 << 2)
- *u.ulp++ = 0;
-
- if (n & 1 << 1) {
- *u.ucp++ = 0;
- *u.ucp++ = 0;
- }
-
- if (n & 1)
- *u.ucp++ = 0;
-}
-
-static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
- size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i = 0;
unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
@@ -204,59 +154,20 @@
/*
* gzip delarations
*/
-#define STATIC static
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static void error(char *m);
-
extern char input_data[];
extern char input_data_end[];
-static unsigned char *output_data;
-static unsigned long output_ptr;
+unsigned char *output_data;
+unsigned long output_ptr;
-static void error(char *m);
-
-static void putstr(const char *);
-
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef STANDALONE_DEBUG
-#define NO_INFLATE_MALLOC
-#endif
-
-#define ARCH_HAS_DECOMP_WDOG
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
#ifndef arch_error
#define arch_error(x)
#endif
-static void error(char *x)
+void error(char *x)
{
arch_error(x);
@@ -272,6 +183,8 @@
error("Attempting division by 0!");
}
+extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
#ifndef STANDALONE_DEBUG
unsigned long
@@ -292,8 +205,8 @@
output_ptr = get_unaligned_le32(tmp);
putstr("Uncompressing Linux...");
- decompress(input_data, input_data_end - input_data,
- NULL, NULL, output_data, NULL, error);
+ do_decompress(input_data, input_data_end - input_data,
+ output_data, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index a5924b9..7ca9ecf 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -14,6 +14,13 @@
/DISCARD/ : {
*(.ARM.exidx*)
*(.ARM.extab*)
+ /*
+ * Discard any r/w data - this produces a link error if we have any,
+ * which is required for PIC decompression. Local data generates
+ * GOTOFF relocations, which prevents it being relocated independently
+ * of the text/got segments.
+ */
+ *(.data)
}
. = TEXT_START;
@@ -40,7 +47,6 @@
.got : { *(.got) }
_got_end = .;
.got.plt : { *(.got.plt) }
- .data : { *(.data) }
_edata = .;
. = BSS_START;
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index aae5bc0..446b696 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -99,6 +99,16 @@
}
EXPORT_SYMBOL(clkdev_add);
+void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
+{
+ mutex_lock(&clocks_mutex);
+ while (num--) {
+ list_add_tail(&cl->node, &clocks);
+ cl++;
+ }
+ mutex_unlock(&clocks_mutex);
+}
+
#define MAX_DEV_ID 20
#define MAX_CON_ID 16
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cc32c1e..cc0a932 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -277,7 +277,7 @@
* We don't need to sync the DMA buffer since
* it was allocated via the coherent allocators.
*/
- dma_cache_maint(ptr, size, dir);
+ __dma_single_cpu_to_dev(ptr, size, dir);
}
return dma_addr;
@@ -315,6 +315,8 @@
__cpuc_flush_dcache_area(ptr, size);
}
free_safe_buffer(dev->archdata.dmabounce, buf);
+ } else {
+ __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
}
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941..1cf999a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
@@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void vic_ack_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
- /* moreover, clear the soft-triggered, in case it was the reason */
- writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- void __iomem *base = get_irq_chip_data(irq);
- irq &= 31;
- writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
- int i;
-
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
@@ -99,13 +58,34 @@
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+static int vic_id;
+
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
+#endif /* CONFIG_PM */
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@
};
/**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
- struct vic_device *v;
-
- if (vic_id >= ARRAY_SIZE(vic_devices))
- printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
- }
-}
-
-/**
* vic_pm_init - initicall to register VIC pm
*
* This is called via late_initcall() to register
@@ -219,9 +174,60 @@
return 0;
}
-
late_initcall(vic_pm_init);
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
@@ -255,10 +261,7 @@
return 0;
}
-
#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
#define vic_set_wake NULL
#endif /* CONFIG_PM */
@@ -270,80 +273,6 @@
.set_wake = vic_set_wake,
};
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
-{
- unsigned int i;
- u32 cellid = 0;
- enum amba_vendor vendor;
-
- /* Identify which VIC cell this one is, by reading the ID */
- for (i = 0; i < 4; i++) {
- u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
- cellid |= (readl(addr) & 0xff) << (8 * i);
- }
- vendor = (cellid >> 12) & 0xff;
- printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
- base, cellid, vendor);
-
- switch(vendor) {
- case AMBA_VENDOR_ST:
- vik_init_st(base, irq_start, vic_sources);
- return;
- default:
- printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
- /* fall through */
- case AMBA_VENDOR_ARM:
- break;
- }
-
- /* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts
- */
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
-
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
-
- vic_init2(base);
-
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
-
- vic_pm_register(base, irq_start, resume_sources);
-}
-
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
@@ -351,7 +280,7 @@
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
@@ -400,3 +329,73 @@
}
}
}
+
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vic_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts
+ */
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+
+ vic_init2(base);
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+
+ vic_pm_register(base, irq_start, resume_sources);
+}
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
index abe9966..66a10b5 100644
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -201,7 +201,7 @@
# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MCBSP is not set
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
@@ -590,7 +590,46 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
new file mode 100644
index 0000000..76d724b
--- /dev/null
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -0,0 +1,1640 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc7
+# Fri Dec 5 10:58:47 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+# CONFIG_TASK_DELAY_ACCT is not set
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT572D940HF Board Type
+#
+CONFIG_MACH_AT572D940HFEB=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
+CONFIG_NUM_SERIAL=3
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+CONFIG_SPECIALIX=m
+CONFIG_RIO=m
+# CONFIG_RIO_OLDPCI is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=m
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=m
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_AT73C213 is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=m
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+CONFIG_RTC_DRV_DS1305=y
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_JBD_DEBUG=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+# CONFIG_UBIFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
new file mode 100644
index 0000000..61a817e
--- /dev/null
+++ b/arch/arm/configs/devkit8000_defconfig
@@ -0,0 +1,1889 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb 4 15:42:56 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_DEVKIT8000=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root delay=3"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=y
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=40960
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
index a192248..e7940a9 100644
--- a/arch/arm/configs/igep0020_defconfig
+++ b/arch/arm/configs/igep0020_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Fri Nov 13 12:01:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Thu Jan 7 16:14:55 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -126,14 +127,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -162,6 +190,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -184,6 +213,7 @@
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
@@ -197,12 +227,8 @@
#
# OMAP Feature Selections
#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
@@ -217,6 +243,7 @@
CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Board Type
@@ -227,13 +254,16 @@
# CONFIG_MACH_OMAP3EVM is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_MACH_CM_T35 is not set
CONFIG_MACH_IGEP0020=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
#
# Processor Type
@@ -305,8 +335,6 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
@@ -440,35 +468,35 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
-CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
+CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
@@ -500,12 +528,95 @@
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -516,7 +627,6 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -613,56 +723,26 @@
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_SPI=m
-CONFIG_ATH_COMMON=m
-CONFIG_AR9170_USB=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_B43=m
-# CONFIG_B43_SDIO is not set
-# CONFIG_B43_PHY_LP is not set
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-# CONFIG_WL1251 is not set
-# CONFIG_WL1271 is not set
-# CONFIG_IWM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -672,29 +752,10 @@
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -710,6 +771,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -809,7 +871,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -825,6 +886,8 @@
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -892,7 +955,7 @@
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
@@ -900,11 +963,13 @@
# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -912,6 +977,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -919,6 +986,7 @@
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
@@ -930,65 +998,129 @@
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_TAAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_IGEP0020=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -997,12 +1129,12 @@
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=m
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -1010,29 +1142,21 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
@@ -1049,19 +1173,7 @@
#
# also be needed; see USB_STORAGE Help for more info
#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1099,41 +1211,7 @@
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
@@ -1141,10 +1219,11 @@
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_USB_ULPI is not set
+# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
@@ -1158,7 +1237,8 @@
#
# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_AT91 is not set
@@ -1179,6 +1259,11 @@
# CONFIG_STAGING is not set
#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1253,6 +1338,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1401,6 +1487,7 @@
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
@@ -1425,7 +1512,9 @@
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1433,7 +1522,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 367be98..714835e 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Tue Dec 1 14:04:02 2009
+# Linux kernel version: 2.6.33-rc5
+# Tue Jan 26 11:05:31 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -20,6 +20,8 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV6=y
+CONFIG_OPROFILE_ARM11_CORE=y
CONFIG_OPROFILE_ARMV7=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -33,6 +35,12 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -48,6 +56,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -69,6 +78,7 @@
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -133,14 +143,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
@@ -169,6 +206,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -191,21 +229,23 @@
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
#
CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARCH_OMAP4=y
#
# OMAP Feature Selections
#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_DEBUG_DEVICES=y
+CONFIG_OMAP_DEBUG_LEDS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
@@ -216,43 +256,66 @@
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
# CONFIG_OMAP_PM_NONE is not set
CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+CONFIG_OMAP_PACKAGE_CUS=y
+CONFIG_OMAP_PACKAGE_CBP=y
#
# OMAP Board Type
#
+CONFIG_MACH_OMAP2_TUSB6010=y
+CONFIG_MACH_OMAP_H4=y
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_2430SDP is not set
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP3517EVM=y
CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_N800=y
+CONFIG_MACH_NOKIA_N810=y
+CONFIG_MACH_NOKIA_N810_WIMAX=y
+CONFIG_MACH_NOKIA_N8X0=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_OMAP_ZOOM2=y
CONFIG_MACH_OMAP_ZOOM3=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_IGEP0020=y
CONFIG_MACH_OMAP_3630SDP=y
+CONFIG_MACH_OMAP_4430SDP=y
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
#
# Processor Type
#
-CONFIG_CPU_32v6K=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
CONFIG_CPU_V7=y
+CONFIG_CPU_32v6=y
CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
@@ -268,9 +331,11 @@
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_411920 is not set
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
CONFIG_COMMON_CLKDEV=y
#
@@ -287,6 +352,7 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_SMP is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
@@ -298,6 +364,7 @@
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -308,12 +375,10 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
@@ -509,15 +574,18 @@
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
@@ -671,6 +739,7 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -681,9 +750,12 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
@@ -694,6 +766,7 @@
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -792,28 +865,26 @@
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -861,6 +932,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -889,6 +961,7 @@
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_OMAP is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
@@ -914,6 +987,7 @@
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -948,6 +1022,7 @@
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -986,6 +1061,7 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_OMAP=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
@@ -1024,7 +1100,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1040,6 +1115,8 @@
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1067,6 +1144,7 @@
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1141,6 +1219,7 @@
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1166,6 +1245,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1179,6 +1259,7 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -1204,20 +1285,22 @@
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
+# CONFIG_MENELAUS is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
+CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1225,6 +1308,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -1232,6 +1317,7 @@
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
@@ -1267,6 +1353,7 @@
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
@@ -1281,6 +1368,7 @@
# CONFIG_FB_OMAP_LCD_MIPID is not set
# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_OMAP2_DSS is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LMS283GF05 is not set
@@ -1364,12 +1452,15 @@
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_N810 is not set
# CONFIG_SND_OMAP_SOC_OVERO is not set
# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
+# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
# CONFIG_SND_OMAP_SOC_SDP3430 is not set
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
+# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_TWL4030=y
@@ -1418,7 +1509,7 @@
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -1441,6 +1532,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
@@ -1556,16 +1648,18 @@
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
+CONFIG_USB_ZERO=m
# CONFIG_USB_ZERO_HNPTEST is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
@@ -1573,6 +1667,7 @@
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
CONFIG_TWL4030_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
@@ -1609,7 +1704,9 @@
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -1653,6 +1750,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
@@ -1683,7 +1781,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1951,6 +2051,7 @@
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1983,7 +2084,9 @@
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1993,9 +2096,12 @@
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 86cc4be..e2ad859 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -187,6 +187,8 @@
#
# OMAP Feature Selections
#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
@@ -333,7 +335,7 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
@@ -1339,7 +1341,7 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index f74eb9a..5d08e0b 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -1,15 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec 5 11:54:09 2008
+# Linux kernel version: 2.6.33-rc6
+# Sat Feb 6 20:25:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,13 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -32,8 +31,15 @@
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -42,24 +48,33 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
@@ -70,31 +85,41 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -102,11 +127,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -114,33 +136,62 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -148,49 +199,58 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
#
CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
#
# OMAP Feature Selections
#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Board Type
@@ -198,15 +258,19 @@
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
CONFIG_MACH_OMAP3_PANDORA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
#
# Processor Type
@@ -215,7 +279,7 @@
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -233,7 +297,12 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -253,13 +322,16 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -268,13 +340,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -366,6 +439,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -379,7 +453,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -390,8 +467,14 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -403,6 +486,8 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -412,6 +497,7 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
@@ -462,6 +548,7 @@
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -478,6 +565,9 @@
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
@@ -486,6 +576,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -494,6 +589,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
@@ -502,7 +601,25 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -525,10 +642,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -545,8 +658,11 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
@@ -559,13 +675,13 @@
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -582,6 +698,7 @@
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -589,6 +706,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -605,13 +723,20 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
@@ -619,13 +744,22 @@
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -634,8 +768,18 @@
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
@@ -670,18 +814,21 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -692,10 +839,12 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -709,21 +858,6 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -736,14 +870,21 @@
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -760,6 +901,7 @@
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -770,11 +912,16 @@
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_ALS is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -786,44 +933,111 @@
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+CONFIG_PANEL_TPO_TD043MTEA1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
@@ -835,6 +1049,16 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
@@ -842,25 +1066,43 @@
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_TWL4030=y
-
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
@@ -873,31 +1115,40 @@
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BRIGHT is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -911,7 +1162,7 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -919,7 +1170,13 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
@@ -930,11 +1187,10 @@
#
# OMAP 343x high speed USB support
#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
@@ -949,11 +1205,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -979,14 +1235,13 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
@@ -1002,27 +1257,46 @@
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1040,16 +1314,41 @@
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1078,10 +1377,12 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1093,6 +1394,7 @@
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@@ -1106,18 +1408,22 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_TWL4030=y
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
#
# File systems
@@ -1126,21 +1432,27 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
@@ -1149,6 +1461,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1175,10 +1492,7 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1187,7 +1501,9 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1196,7 +1512,20 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -1269,6 +1598,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1277,11 +1607,15 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1299,33 +1633,42 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1333,19 +1676,22 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1362,12 +1708,12 @@
#
# Block modes
#
-CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
@@ -1375,13 +1721,15 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
@@ -1403,7 +1751,7 @@
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
@@ -1416,33 +1764,33 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-# added by hand for now
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_USB_OTG_UTILS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC_OMAP_HS=y
-
+CONFIG_NLATTR=y
+# CONFIG_SHM_SIGNAL is not set
+# CONFIG_IOQ is not set
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 3de640a..a96bca2 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -199,7 +199,7 @@
#
# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
@@ -242,10 +242,13 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_GIC=y
#
@@ -304,7 +307,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -488,7 +491,8 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index a3e3c82..ff8ac3d 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -1136,7 +1136,7 @@
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
@@ -1186,7 +1186,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
+CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1416,7 +1416,7 @@
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index b6eeebb..426ae94 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1354,7 +1354,7 @@
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
+CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1362,7 +1362,7 @@
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index d0daeab..e8ddec2 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -235,6 +235,234 @@
#define smp_mb__before_atomic_inc() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
+#ifndef CONFIG_GENERIC_ATOMIC64
+typedef struct {
+ u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline u64 atomic64_read(atomic64_t *v)
+{
+ u64 result;
+
+ __asm__ __volatile__("@ atomic64_read\n"
+" ldrexd %0, %H0, [%1]"
+ : "=&r" (result)
+ : "r" (&v->counter)
+ );
+
+ return result;
+}
+
+static inline void atomic64_set(atomic64_t *v, u64 i)
+{
+ u64 tmp;
+
+ __asm__ __volatile__("@ atomic64_set\n"
+"1: ldrexd %0, %H0, [%1]\n"
+" strexd %0, %2, %H2, [%1]\n"
+" teq %0, #0\n"
+" bne 1b"
+ : "=&r" (tmp)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+}
+
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+ u64 result;
+ unsigned long tmp;
+
+ __asm__ __volatile__("@ atomic64_add\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" adds %0, %0, %3\n"
+" adc %H0, %H0, %H3\n"
+" strexd %1, %0, %H0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+}
+
+static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+{
+ u64 result;
+ unsigned long tmp;
+
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_add_return\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" adds %0, %0, %3\n"
+" adc %H0, %H0, %H3\n"
+" strexd %1, %0, %H0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+
+ smp_mb();
+
+ return result;
+}
+
+static inline void atomic64_sub(u64 i, atomic64_t *v)
+{
+ u64 result;
+ unsigned long tmp;
+
+ __asm__ __volatile__("@ atomic64_sub\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" subs %0, %0, %3\n"
+" sbc %H0, %H0, %H3\n"
+" strexd %1, %0, %H0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+}
+
+static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+{
+ u64 result;
+ unsigned long tmp;
+
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_sub_return\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" subs %0, %0, %3\n"
+" sbc %H0, %H0, %H3\n"
+" strexd %1, %0, %H0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "r" (i)
+ : "cc");
+
+ smp_mb();
+
+ return result;
+}
+
+static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+{
+ u64 oldval;
+ unsigned long res;
+
+ smp_mb();
+
+ do {
+ __asm__ __volatile__("@ atomic64_cmpxchg\n"
+ "ldrexd %1, %H1, [%2]\n"
+ "mov %0, #0\n"
+ "teq %1, %3\n"
+ "teqeq %H1, %H3\n"
+ "strexdeq %0, %4, %H4, [%2]"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (&ptr->counter), "r" (old), "r" (new)
+ : "cc");
+ } while (res);
+
+ smp_mb();
+
+ return oldval;
+}
+
+static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+{
+ u64 result;
+ unsigned long tmp;
+
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_xchg\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" strexd %1, %3, %H3, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&ptr->counter), "r" (new)
+ : "cc");
+
+ smp_mb();
+
+ return result;
+}
+
+static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+{
+ u64 result;
+ unsigned long tmp;
+
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_dec_if_positive\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" subs %0, %0, #1\n"
+" sbc %H0, %H0, #0\n"
+" teq %H0, #0\n"
+" bmi 2f\n"
+" strexd %1, %0, %H0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b\n"
+"2:"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter)
+ : "cc");
+
+ smp_mb();
+
+ return result;
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+ u64 val;
+ unsigned long tmp;
+ int ret = 1;
+
+ smp_mb();
+
+ __asm__ __volatile__("@ atomic64_add_unless\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" teq %0, %4\n"
+" teqeq %H0, %H4\n"
+" moveq %1, #0\n"
+" beq 2f\n"
+" adds %0, %0, %5\n"
+" adc %H0, %H0, %H5\n"
+" strexd %2, %0, %H0, [%3]\n"
+" teq %2, #0\n"
+" bne 1b\n"
+"2:"
+ : "=&r" (val), "=&r" (ret), "=&r" (tmp)
+ : "r" (&v->counter), "r" (u), "r" (a)
+ : "cc");
+
+ if (ret)
+ smp_mb();
+
+ return ret;
+}
+
+#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v) atomic64_add(1LL, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v) atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v) atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL)
+
+#else /* !CONFIG_GENERIC_ATOMIC64 */
+#include <asm-generic/atomic64.h>
+#endif
#include <asm-generic/atomic-long.h>
#endif
#endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 5fe4a2a..72da7e0 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -197,21 +197,6 @@
* DMA Cache Coherency
* ===================
*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- * - start - virtual start address
- * - end - virtual end address
- *
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- * - start - virtual start address
- * - end - virtual end address
- *
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -228,8 +213,9 @@
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_area)(void *, size_t);
- void (*dma_inv_range)(const void *, const void *);
- void (*dma_clean_range)(const void *, const void *);
+ void (*dma_map_area)(const void *, size_t, int);
+ void (*dma_unmap_area)(const void *, size_t, int);
+
void (*dma_flush_range)(const void *, const void *);
};
@@ -259,8 +245,8 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range cpu_cache.dma_inv_range
-#define dmac_clean_range cpu_cache.dma_clean_range
+#define dmac_map_area cpu_cache.dma_map_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
@@ -285,12 +271,12 @@
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
#endif
@@ -331,12 +317,8 @@
* processes address space. Really, we want to allow our "user
* space" model to handle this.
*/
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
- } while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+ unsigned long, void *, const void *, unsigned long);
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
@@ -370,17 +352,6 @@
}
}
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
-{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
-}
-
#ifndef CONFIG_CPU_CACHE_VIPT
#define flush_cache_mm(mm) \
vivt_flush_cache_mm(mm)
@@ -388,15 +359,10 @@
vivt_flush_cache_range(vma,start,end)
#define flush_cache_page(vma,addr,pfn) \
vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
- vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write);
#endif
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index b6ec7c6..7a0690d 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -27,4 +27,7 @@
void clkdev_add(struct clk_lookup *cl);
void clkdev_drop(struct clk_lookup *cl);
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index a96300b..256ee1c 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -57,18 +57,58 @@
#endif
/*
- * DMA-consistent mapping functions. These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices. This is the "generic" version. The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership". A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device. These helper functions
+ * represent the transitions between these two ownership states.
*
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches. We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change. Drivers must not use these.
*/
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_cpu_to_dev(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ extern void ___dma_single_dev_to_cpu(const void *, size_t,
+ enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+ size_t, enum dma_data_direction);
+
+ if (!arch_is_coherent())
+ ___dma_page_dev_to_cpu(page, off, size, dir);
+}
/*
* Return whether the given device DMA address mask can be supported
@@ -304,8 +344,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint(cpu_addr, size, dir);
+ __dma_single_cpu_to_dev(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
@@ -329,8 +368,7 @@
{
BUG_ON(!valid_dma_direction(dir));
- if (!arch_is_coherent())
- dma_cache_maint_page(page, offset, size, dir);
+ __dma_page_cpu_to_dev(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
@@ -352,7 +390,7 @@
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
}
/**
@@ -372,7 +410,8 @@
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- /* nothing to do */
+ __dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+ size, dir);
}
#endif /* CONFIG_DMABOUNCE */
@@ -400,7 +439,10 @@
{
BUG_ON(!valid_dma_direction(dir));
- dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+ if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+ return;
+
+ __dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -412,8 +454,7 @@
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
- if (!arch_is_coherent())
- dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+ __dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index d2a59cf..c980156 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -69,9 +69,16 @@
/*
* __arm_ioremap takes CPU physical address.
* __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ * The _caller variety takes a __builtin_return_address(0) value for
+ * /proc/vmalloc to use - and should only be used in non-inline functions.
*/
-extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
+ size_t, unsigned int, void *);
+extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
+ void *);
+
+extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
extern void __iounmap(volatile void __iomem *addr);
/*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index b2cc1fc..8bffc3f 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -46,12 +46,4 @@
extern struct sys_timer *system_timer;
extern void timer_tick(void);
-/*
- * Kernel time keeping support.
- */
-struct timespec;
-extern int (*set_rtc)(void);
-extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
-extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
-
#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 5421d82..4312ee5 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -76,6 +76,17 @@
*/
#define IOREMAP_MAX_ORDER 24
+/*
+ * Size of DMA-consistent memory region. Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE SZ_2M
+#endif
+
+#define CONSISTENT_END (0xffe00000UL)
+#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
+
#else /* CONFIG_MMU */
/*
@@ -93,11 +104,11 @@
#endif
#ifndef PHYS_OFFSET
-#define PHYS_OFFSET (CONFIG_DRAM_BASE)
+#define PHYS_OFFSET UL(CONFIG_DRAM_BASE)
#endif
#ifndef END_MEM
-#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
@@ -113,14 +124,6 @@
#endif /* !CONFIG_MMU */
/*
- * Size of DMA-consistent memory region. Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
-/*
* Physical vs virtual RAM address space conversion. These are
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index b561584..68870c7 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,6 +6,7 @@
typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
unsigned int id;
+ spinlock_t id_lock;
#endif
unsigned int kvm_seq;
} mm_context_t;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index de6cefb..a0b3cac 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -43,12 +43,23 @@
#define ASID_FIRST_VERSION (1 << ASID_BITS)
extern unsigned int cpu_last_asid;
+#ifdef CONFIG_SMP
+DECLARE_PER_CPU(struct mm_struct *, current_mm);
+#endif
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
void __new_context(struct mm_struct *mm);
static inline void check_context(struct mm_struct *mm)
{
+ /*
+ * This code is executed with interrupts enabled. Therefore,
+ * mm->context.id cannot be updated to the latest ASID version
+ * on a different CPU (and condition below not triggered)
+ * without first getting an IPI to reset the context. The
+ * alternative is to take a read_lock on mm->context.id_lock
+ * (after changing its type to rwlock_t).
+ */
if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
__new_context(mm);
@@ -108,6 +119,10 @@
__flush_icache_all();
#endif
if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
+#ifdef CONFIG_SMP
+ struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
+ *crt_mm = next;
+#endif
check_context(next);
cpu_switch_mm(next->pgd, next);
if (cache_is_vivt())
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 3a32af4..a485ac3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -117,11 +117,12 @@
#endif
struct page;
+struct vm_area_struct;
struct cpu_user_fns {
void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
};
#ifdef MULTI_USER
@@ -137,7 +138,7 @@
extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr);
+ unsigned long vaddr, struct vm_area_struct *vma);
#endif
#define clear_user_highpage(page,vaddr) \
@@ -145,7 +146,7 @@
#define __HAVE_ARCH_COPY_USER_HIGHPAGE
#define copy_user_highpage(to,from,vaddr,vma) \
- __cpu_copy_user_highpage(to, from, vaddr)
+ __cpu_copy_user_highpage(to, from, vaddr, vma)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
new file mode 100644
index 0000000..49e3049
--- /dev/null
+++ b/arch/arm/include/asm/perf_event.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/include/asm/perf_event.h
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PERF_EVENT_H__
+#define __ARM_PERF_EVENT_H__
+
+/*
+ * NOP: on *most* (read: all supported) ARM platforms, the performance
+ * counter interrupts are regular interrupts and not an NMI. This
+ * means that when we receive the interrupt we can call
+ * perf_event_do_pending() that handles all of the work with
+ * interrupts enabled.
+ */
+static inline void
+set_perf_event_pending(void)
+{
+}
+
+/* ARM performance counters start from 1 (in the cp15 accesses) so use the
+ * same indexes here for consistency. */
+#define PERF_EVENT_INDEX_OFFSET 1
+
+#endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index b011f2e..013cfcd 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -86,8 +86,8 @@
* All 32bit addresses are effectively valid for vmalloc...
* Sort of meaningless for non-VM targets.
*/
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
+#define VMALLOC_START 0UL
+#define VMALLOC_END 0xffffffffUL
#define FIRST_USER_ADDRESS (0)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
new file mode 100644
index 0000000..2829b9f
--- /dev/null
+++ b/arch/arm/include/asm/pmu.h
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/arm/include/asm/pmu.h
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PMU_H__
+#define __ARM_PMU_H__
+
+#ifdef CONFIG_CPU_HAS_PMU
+
+struct pmu_irqs {
+ const int *irqs;
+ int num_irqs;
+};
+
+/**
+ * reserve_pmu() - reserve the hardware performance counters
+ *
+ * Reserve the hardware performance counters in the system for exclusive use.
+ * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
+ * encoded error on failure.
+ */
+extern const struct pmu_irqs *
+reserve_pmu(void);
+
+/**
+ * release_pmu() - Relinquish control of the performance counters
+ *
+ * Release the performance counters and allow someone else to use them.
+ * Callers must have disabled the counters and released IRQs before calling
+ * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
+ * a cookie.
+ */
+extern int
+release_pmu(const struct pmu_irqs *irqs);
+
+/**
+ * init_pmu() - Initialise the PMU.
+ *
+ * Initialise the system ready for PMU enabling. This should typically set the
+ * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
+ * the actual hardware initialisation.
+ */
+extern int
+init_pmu(void);
+
+#else /* CONFIG_CPU_HAS_PMU */
+
+static inline const struct pmu_irqs *
+reserve_pmu(void)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline int
+release_pmu(const struct pmu_irqs *irqs)
+{
+ return -ENODEV;
+}
+
+static inline int
+init_pmu(void)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_CPU_HAS_PMU */
+
+#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 5ccce0a..f392fb4 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -223,18 +223,6 @@
#define bank_phys_end(bank) ((bank)->start + (bank)->size)
#define bank_phys_size(bank) (bank)->size
-/*
- * Early command line parameters.
- */
-struct early_params {
- const char *arg;
- void (*fn)(char **p);
-};
-
-#define __early_param(name,fn) \
-static struct early_params __early_##fn __used \
-__attribute__((__section__(".early_param.init"))) = { name, fn }
-
#endif /* __KERNEL__ */
#endif
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index 59303e2..e621530 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -13,4 +13,9 @@
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
+static inline int cache_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
#endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index c91c64c..17eb355 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -5,6 +5,22 @@
#error SMP not supported on pre-ARMv6 CPUs
#endif
+static inline void dsb_sev(void)
+{
+#if __LINUX_ARM_ARCH__ >= 7
+ __asm__ __volatile__ (
+ "dsb\n"
+ "sev"
+ );
+#elif defined(CONFIG_CPU_32v6K)
+ __asm__ __volatile__ (
+ "mcr p15, 0, %0, c7, c10, 4\n"
+ "sev"
+ : : "r" (0)
+ );
+#endif
+}
+
/*
* ARMv6 Spin-locking.
*
@@ -69,13 +85,11 @@
__asm__ __volatile__(
" str %1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
-" sev"
-#endif
:
: "r" (&lock->lock), "r" (0)
: "cc");
+
+ dsb_sev();
}
/*
@@ -132,13 +146,11 @@
__asm__ __volatile__(
"str %1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-" mcr p15, 0, %1, c7, c10, 4\n" /* DSB */
-" sev\n"
-#endif
:
: "r" (&rw->lock), "r" (0)
: "cc");
+
+ dsb_sev();
}
/* write_can_lock - would write_trylock() succeed? */
@@ -188,14 +200,12 @@
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
-#ifdef CONFIG_CPU_32v6K
-"\n cmp %0, #0\n"
-" mcreq p15, 0, %0, c7, c10, 4\n"
-" seveq"
-#endif
: "=&r" (tmp), "=&r" (tmp2)
: "r" (&rw->lock)
: "cc");
+
+ if (tmp == 0)
+ dsb_sev();
}
static inline int arch_read_trylock(arch_rwlock_t *rw)
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 058e7e9..ca88e6a 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -73,8 +73,7 @@
struct pt_regs;
-void die(const char *msg, struct pt_regs *regs, int err)
- __attribute__((noreturn));
+void die(const char *msg, struct pt_regs *regs, int err);
struct siginfo;
void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 2dfb7d7..b74970e 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -115,7 +115,8 @@
extern void iwmmxt_task_release(struct thread_info *);
extern void iwmmxt_task_switch(struct thread_info *);
-extern void vfp_sync_state(struct thread_info *thread);
+extern void vfp_sync_hwstate(struct thread_info *);
+extern void vfp_flush_hwstate(struct thread_info *);
#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c2f1605..e085e2c 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -529,7 +529,8 @@
* cache entries for the kernels virtual memory range are written
* back to the page.
*/
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep);
#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index dd00f74..26d302c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,7 @@
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
+obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
@@ -46,6 +47,8 @@
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
+obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
+obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 4a88125..8835115 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
*/
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
@@ -112,5 +113,9 @@
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
+ BLANK();
+ DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
+ DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
+ DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
return 0;
}
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5c91add..a38b487 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
#if defined(CONFIG_CPU_V6)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -51,7 +51,7 @@
#elif defined(CONFIG_CPU_V7)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -71,7 +71,7 @@
#elif defined(CONFIG_CPU_XSCALE)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -98,7 +98,7 @@
#else
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -164,7 +164,7 @@
.ltorg
ENTRY(printascii)
- addruart r3
+ addruart r3, r1
b 2f
1: waituart r2, r3
senduart r1, r3
@@ -180,7 +180,7 @@
ENDPROC(printascii)
ENTRY(printch)
- addruart r3
+ addruart r3, r1
mov r1, r0
mov r0, #0
b 1b
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
new file mode 100644
index 0000000..31a316c
--- /dev/null
+++ b/arch/arm/kernel/leds.c
@@ -0,0 +1,115 @@
+/*
+ * LED support code, ripped out of arch/arm/kernel/time.c
+ *
+ * Copyright (C) 1994-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/leds.h>
+
+static void dummy_leds_event(led_event_t evt)
+{
+}
+
+void (*leds_event)(led_event_t) = dummy_leds_event;
+
+struct leds_evt_name {
+ const char name[8];
+ int on;
+ int off;
+};
+
+static const struct leds_evt_name evt_names[] = {
+ { "amber", led_amber_on, led_amber_off },
+ { "blue", led_blue_on, led_blue_off },
+ { "green", led_green_on, led_green_off },
+ { "red", led_red_on, led_red_off },
+};
+
+static ssize_t leds_store(struct sys_device *dev,
+ struct sysdev_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret = -EINVAL, len = strcspn(buf, " ");
+
+ if (len > 0 && buf[len] == '\0')
+ len--;
+
+ if (strncmp(buf, "claim", len) == 0) {
+ leds_event(led_claim);
+ ret = size;
+ } else if (strncmp(buf, "release", len) == 0) {
+ leds_event(led_release);
+ ret = size;
+ } else {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
+ if (strlen(evt_names[i].name) != len ||
+ strncmp(buf, evt_names[i].name, len) != 0)
+ continue;
+ if (strncmp(buf+len, " on", 3) == 0) {
+ leds_event(evt_names[i].on);
+ ret = size;
+ } else if (strncmp(buf+len, " off", 4) == 0) {
+ leds_event(evt_names[i].off);
+ ret = size;
+ }
+ break;
+ }
+ }
+ return ret;
+}
+
+static SYSDEV_ATTR(event, 0200, NULL, leds_store);
+
+static int leds_suspend(struct sys_device *dev, pm_message_t state)
+{
+ leds_event(led_stop);
+ return 0;
+}
+
+static int leds_resume(struct sys_device *dev)
+{
+ leds_event(led_start);
+ return 0;
+}
+
+static int leds_shutdown(struct sys_device *dev)
+{
+ leds_event(led_halted);
+ return 0;
+}
+
+static struct sysdev_class leds_sysclass = {
+ .name = "leds",
+ .shutdown = leds_shutdown,
+ .suspend = leds_suspend,
+ .resume = leds_resume,
+};
+
+static struct sys_device leds_device = {
+ .id = 0,
+ .cls = &leds_sysclass,
+};
+
+static int __init leds_init(void)
+{
+ int ret;
+ ret = sysdev_class_register(&leds_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&leds_device);
+ if (ret == 0)
+ ret = sysdev_create_file(&leds_device, &attr_event);
+ return ret;
+}
+
+device_initcall(leds_init);
+
+EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
new file mode 100644
index 0000000..c54ceb3
--- /dev/null
+++ b/arch/arm/kernel/perf_event.c
@@ -0,0 +1,2276 @@
+#undef DEBUG
+
+/*
+ * ARM performance counter support.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * This code is based on the sparc64 perf event code, which is in turn based
+ * on the x86 code. Callchain code is based on the ARM OProfile backtrace
+ * code.
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+#include <asm/stacktrace.h>
+
+static const struct pmu_irqs *pmu_irqs;
+
+/*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+DEFINE_SPINLOCK(pmu_lock);
+
+/*
+ * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * another platform that supports more, we need to increase this to be the
+ * largest of all platforms.
+ *
+ * ARMv7 supports up to 32 events:
+ * cycle counter CCNT + 31 events counters CNT0..30.
+ * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
+ */
+#define ARMPMU_MAX_HWEVENTS 33
+
+/* The events for a given CPU. */
+struct cpu_hw_events {
+ /*
+ * The events that are active on the CPU for the given index. Index 0
+ * is reserved.
+ */
+ struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+
+ /*
+ * A 1 bit for an index indicates that the counter is actively being
+ * used.
+ */
+ unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+struct arm_pmu {
+ char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*event_map)(int evt);
+ u64 (*raw_event)(u64);
+ int (*get_event_idx)(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *hwc);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ int num_events;
+ u64 max_period;
+};
+
+/* Set at runtime when we know what CPU type we are. */
+static const struct arm_pmu *armpmu;
+
+#define HW_OP_UNSUPPORTED 0xFFFF
+
+#define C(_x) \
+ PERF_COUNT_HW_CACHE_##_x
+
+#define CACHE_OP_UNSUPPORTED 0xFFFF
+
+static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static int
+armpmu_map_cache_event(u64 config)
+{
+ unsigned int cache_type, cache_op, cache_result, ret;
+
+ cache_type = (config >> 0) & 0xff;
+ if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+ return -EINVAL;
+
+ cache_op = (config >> 8) & 0xff;
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+ return -EINVAL;
+
+ cache_result = (config >> 16) & 0xff;
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return -EINVAL;
+
+ ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+
+ if (ret == CACHE_OP_UNSUPPORTED)
+ return -ENOENT;
+
+ return ret;
+}
+
+static int
+armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ s64 left = atomic64_read(&hwc->period_left);
+ s64 period = hwc->sample_period;
+ int ret = 0;
+
+ if (unlikely(left <= -period)) {
+ left = period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (unlikely(left <= 0)) {
+ left += period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (left > (s64)armpmu->max_period)
+ left = armpmu->max_period;
+
+ atomic64_set(&hwc->prev_count, (u64)-left);
+
+ armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
+
+ perf_event_update_userpage(event);
+
+ return ret;
+}
+
+static u64
+armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ int shift = 64 - 32;
+ s64 prev_raw_count, new_raw_count;
+ s64 delta;
+
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = armpmu->read_counter(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &event->count);
+ atomic64_sub(delta, &hwc->period_left);
+
+ return new_raw_count;
+}
+
+static void
+armpmu_disable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ WARN_ON(idx < 0);
+
+ clear_bit(idx, cpuc->active_mask);
+ armpmu->disable(hwc, idx);
+
+ barrier();
+
+ armpmu_event_update(event, hwc, idx);
+ cpuc->events[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static void
+armpmu_read(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Don't read disabled counters! */
+ if (hwc->idx < 0)
+ return;
+
+ armpmu_event_update(event, hwc, hwc->idx);
+}
+
+static void
+armpmu_unthrottle(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /*
+ * Set the period again. Some counters can't be stopped, so when we
+ * were throttled we simply disabled the IRQ source and the counter
+ * may have been left counting. If we don't do this step then we may
+ * get an interrupt too soon or *way* too late if the overflow has
+ * happened since disabling.
+ */
+ armpmu_event_set_period(event, hwc, hwc->idx);
+ armpmu->enable(hwc, hwc->idx);
+}
+
+static int
+armpmu_enable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int err = 0;
+
+ /* If we don't have a space for the counter then finish early. */
+ idx = armpmu->get_event_idx(cpuc, hwc);
+ if (idx < 0) {
+ err = idx;
+ goto out;
+ }
+
+ /*
+ * If there is an event in the counter we are going to use then make
+ * sure it is disabled.
+ */
+ event->hw.idx = idx;
+ armpmu->disable(hwc, idx);
+ cpuc->events[idx] = event;
+ set_bit(idx, cpuc->active_mask);
+
+ /* Set the period for the event. */
+ armpmu_event_set_period(event, hwc, idx);
+
+ /* Enable the event. */
+ armpmu->enable(hwc, idx);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+out:
+ return err;
+}
+
+static struct pmu pmu = {
+ .enable = armpmu_enable,
+ .disable = armpmu_disable,
+ .unthrottle = armpmu_unthrottle,
+ .read = armpmu_read,
+};
+
+static int
+validate_event(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ struct hw_perf_event fake_event = event->hw;
+
+ if (event->pmu && event->pmu != &pmu)
+ return 0;
+
+ return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+}
+
+static int
+validate_group(struct perf_event *event)
+{
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct cpu_hw_events fake_pmu;
+
+ memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+ if (!validate_event(&fake_pmu, leader))
+ return -ENOSPC;
+
+ list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+ if (!validate_event(&fake_pmu, sibling))
+ return -ENOSPC;
+ }
+
+ if (!validate_event(&fake_pmu, event))
+ return -ENOSPC;
+
+ return 0;
+}
+
+static int
+armpmu_reserve_hardware(void)
+{
+ int i;
+ int err;
+
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ pr_warning("unable to reserve pmu\n");
+ return PTR_ERR(pmu_irqs);
+ }
+
+ init_pmu();
+
+ if (pmu_irqs->num_irqs < 1) {
+ pr_err("no irqs for PMUs defined\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < pmu_irqs->num_irqs; ++i) {
+ err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq,
+ IRQF_DISABLED, "armpmu", NULL);
+ if (err) {
+ pr_warning("unable to request IRQ%d for ARM "
+ "perf counters\n", pmu_irqs->irqs[i]);
+ break;
+ }
+ }
+
+ if (err) {
+ for (i = i - 1; i >= 0; --i)
+ free_irq(pmu_irqs->irqs[i], NULL);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
+
+ return err;
+}
+
+static void
+armpmu_release_hardware(void)
+{
+ int i;
+
+ for (i = pmu_irqs->num_irqs - 1; i >= 0; --i)
+ free_irq(pmu_irqs->irqs[i], NULL);
+ armpmu->stop();
+
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+
+static void
+hw_perf_event_destroy(struct perf_event *event)
+{
+ if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
+ armpmu_release_hardware();
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+}
+
+static int
+__hw_perf_event_init(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ int mapping, err;
+
+ /* Decode the generic type into an ARM event identifier. */
+ if (PERF_TYPE_HARDWARE == event->attr.type) {
+ mapping = armpmu->event_map(event->attr.config);
+ } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
+ mapping = armpmu_map_cache_event(event->attr.config);
+ } else if (PERF_TYPE_RAW == event->attr.type) {
+ mapping = armpmu->raw_event(event->attr.config);
+ } else {
+ pr_debug("event type %x not supported\n", event->attr.type);
+ return -EOPNOTSUPP;
+ }
+
+ if (mapping < 0) {
+ pr_debug("event %x:%llx not supported\n", event->attr.type,
+ event->attr.config);
+ return mapping;
+ }
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ * The ARM performance counters are on all of the time so if someone
+ * has asked us for some excludes then we have to fail.
+ */
+ if (event->attr.exclude_kernel || event->attr.exclude_user ||
+ event->attr.exclude_hv || event->attr.exclude_idle) {
+ pr_debug("ARM performance counters do not support "
+ "mode exclusion\n");
+ return -EPERM;
+ }
+
+ /*
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
+ */
+ hwc->idx = -1;
+
+ /*
+ * Store the event encoding into the config_base field. config and
+ * event_base are unused as the only 2 things we need to know are
+ * the event mapping and the counter to use. The counter to use is
+ * also the indx and the config_base is the event type.
+ */
+ hwc->config_base = (unsigned long)mapping;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ if (!hwc->sample_period) {
+ hwc->sample_period = armpmu->max_period;
+ hwc->last_period = hwc->sample_period;
+ atomic64_set(&hwc->period_left, hwc->sample_period);
+ }
+
+ err = 0;
+ if (event->group_leader != event) {
+ err = validate_group(event);
+ if (err)
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+const struct pmu *
+hw_perf_event_init(struct perf_event *event)
+{
+ int err = 0;
+
+ if (!armpmu)
+ return ERR_PTR(-ENODEV);
+
+ event->destroy = hw_perf_event_destroy;
+
+ if (!atomic_inc_not_zero(&active_events)) {
+ if (atomic_read(&active_events) > perf_max_events) {
+ atomic_dec(&active_events);
+ return ERR_PTR(-ENOSPC);
+ }
+
+ mutex_lock(&pmu_reserve_mutex);
+ if (atomic_read(&active_events) == 0) {
+ err = armpmu_reserve_hardware();
+ }
+
+ if (!err)
+ atomic_inc(&active_events);
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+
+ if (err)
+ return ERR_PTR(err);
+
+ err = __hw_perf_event_init(event);
+ if (err)
+ hw_perf_event_destroy(event);
+
+ return err ? ERR_PTR(err) : &pmu;
+}
+
+void
+hw_perf_enable(void)
+{
+ /* Enable all of the perf events on hardware. */
+ int idx;
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ if (!armpmu)
+ return;
+
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+
+ if (!event)
+ continue;
+
+ armpmu->enable(&event->hw, idx);
+ }
+
+ armpmu->start();
+}
+
+void
+hw_perf_disable(void)
+{
+ if (armpmu)
+ armpmu->stop();
+}
+
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ * effectively stops the counter from counting.
+ * - disable the counter's interrupt generation (each counter has it's
+ * own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ * - enable the counter's interrupt generation.
+ * - set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+enum armv6_perf_types {
+ ARMV6_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6_PERFCTR_BR_EXEC = 0x5,
+ ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
+ ARMV6_PERFCTR_INSTR_EXEC = 0x7,
+ ARMV6_PERFCTR_DCACHE_HIT = 0x9,
+ ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
+ ARMV6_PERFCTR_DCACHE_MISS = 0xB,
+ ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
+ ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
+ ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
+ ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
+ ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
+ ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
+ ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
+ ARMV6_PERFCTR_NOP = 0x20,
+};
+
+enum armv6_counters {
+ ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_COUNTER0,
+ ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+enum armv6mpcore_perf_types {
+ ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
+ ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
+ ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
+ ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
+ ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+ ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
+ ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
+ ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+ ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
+ ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
+ ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE (1 << 0)
+#define ARMV6_PMCR_CTR01_RESET (1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
+#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
+#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+ (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+ ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+ return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+ enum armv6_counters counter)
+{
+ int ret = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+ else if (ARMV6_COUNTER0 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+ else if (ARMV6_COUNTER1 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+ unsigned long value = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+ u32 value)
+{
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = 0;
+ evt = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+ ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+ ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the event
+ * that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+ void *dev)
+{
+ unsigned long pmcr = armv6_pmcr_read();
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!armv6_pmcr_has_overflowed(pmcr))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ /*
+ * The interrupts are cleared by writing the overflow flags back to
+ * the control register. All of the other bits don't have any effect
+ * if they are rewritten, so write the whole value back.
+ */
+ armv6_pmcr_write(pmcr);
+
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts enabled. For
+ * platforms that can have the PMU interrupts raised as a PMI, this
+ * will not work.
+ */
+ perf_event_do_pending();
+
+ return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val |= ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+void
+armv6pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int
+armv6pmu_event_map(int config)
+{
+ int mapping = armv6_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static inline int
+armv6mpcore_pmu_event_map(int config)
+{
+ int mapping = armv6mpcore_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static u64
+armv6pmu_raw_event(u64 config)
+{
+ return config & 0xff;
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ /* Always place a cycle counter into the cycle counter. */
+ if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+ if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV6_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * counter0 and counter1.
+ */
+ if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
+ return ARMV6_COUNTER1;
+ }
+
+ if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
+ return ARMV6_COUNTER0;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ evt = 0;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the number
+ * of ETM bus signal assertion cycles. The external reporting should
+ * be disabled and so this should never increment.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, flags, evt = 0;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+ * simply disable the interrupt reporting.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+ .name = "v6",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6pmu_disable_event,
+ .event_map = armv6pmu_event_map,
+ .raw_event = armv6pmu_raw_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+ .name = "v6mpcore",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6mpcore_pmu_disable_event,
+ .event_map = armv6mpcore_pmu_event_map,
+ .raw_event = armv6pmu_raw_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ * by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ * a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ * a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ * counter and all 4 performance counters together can be reset separately.
+ */
+
+#define ARMV7_PMU_CORTEX_A8_NAME "ARMv7 Cortex-A8"
+
+#define ARMV7_PMU_CORTEX_A9_NAME "ARMv7 Cortex-A9"
+
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_IFETCH_MISS = 0x01,
+ ARMV7_PERFCTR_ITLB_MISS = 0x02,
+ ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_DREAD = 0x06,
+ ARMV7_PERFCTR_DWRITE = 0x07,
+
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+ /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ * - all branch instructions,
+ * - instructions that explicitly write the PC,
+ * - exception generating instructions.
+ */
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+
+ ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
+
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+
+ ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
+ ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
+ ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
+ ARMV7_PERFCTR_L2_ACCESS = 0x43,
+ ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
+ ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
+ ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
+ ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
+ ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
+ ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
+ ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
+ ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
+ ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
+ ARMV7_PERFCTR_L2_NEON = 0x4E,
+ ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
+ ARMV7_PERFCTR_L1_INST = 0x50,
+ ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
+ ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
+ ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
+ ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
+ ARMV7_PERFCTR_OP_EXECUTED = 0x55,
+ ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
+ ARMV7_PERFCTR_CYCLES_INST = 0x57,
+ ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
+ ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
+ ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
+
+ ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
+ ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
+ ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+ ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
+ ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
+ ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
+
+ ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
+ ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
+
+ ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
+ ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
+ ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
+ ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
+ ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
+ ARMV7_PERFCTR_DATA_EVICTION = 0x65,
+ ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
+ ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
+
+ ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
+
+ ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
+ ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
+ ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
+ ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
+ ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
+
+ ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
+ ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
+ ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
+ ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
+ ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
+ ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
+ ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
+
+ ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
+ ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
+
+ ARMV7_PERFCTR_ISB_INST = 0x90,
+ ARMV7_PERFCTR_DSB_INST = 0x91,
+ ARMV7_PERFCTR_DMB_INST = 0x92,
+ ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
+
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
+ ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
+ ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
+ ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
+ ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] =
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+ ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
+ ARMV7_COUNTER0 = 2, /* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
+#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
+#define ARMV7_PMNC_N_MASK 0x1f
+#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 0 /* First event counter */
+#define ARMV7_CCNT 31 /* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define ARMV7_EVTSEL_MASK 0x7f /* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
+#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
+#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+ val &= ARMV7_PMNC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+ return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum armv7_counters counter)
+{
+ int ret;
+
+ if (counter == ARMV7_CYCLE_COUNTER)
+ ret = pmnc & ARMV7_FLAG_C;
+ else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+ ret = pmnc & ARMV7_FLAG_P(counter);
+ else
+ pr_err("CPU%u checking wrong counter %d overflow status\n",
+ smp_processor_id(), counter);
+
+ return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+ pr_err("CPU%u selecting wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+ unsigned long value = 0;
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2"
+ : "=r" (value));
+ } else
+ pr_err("CPU%u reading wrong counter %d\n",
+ smp_processor_id(), idx);
+
+ return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2"
+ : : "r" (value));
+ } else
+ pr_err("CPU%u writing wrong counter %d\n",
+ smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+ if (armv7_pmnc_select_counter(idx) == idx) {
+ val &= ARMV7_EVTSEL_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+ }
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENS_C;
+ else
+ val = ARMV7_CNTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+ u32 val;
+
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENC_C;
+ else
+ val = ARMV7_CNTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENS_C;
+ else
+ val = ARMV7_INTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENC_C;
+ else
+ val = ARMV7_INTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+ u32 val;
+
+ /* Read */
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+ /* Write to clear flags */
+ val &= ARMV7_FLAG_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+ return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+ u32 val;
+ unsigned int cnt;
+
+ printk(KERN_INFO "PMNC registers dump:\n");
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ printk(KERN_INFO "PMNC =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+ printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+ printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+ printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+ printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+ printk(KERN_INFO "CCNT =0x%08x\n", val);
+
+ for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ armv7_pmnc_select_counter(cnt);
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ }
+}
+#endif
+
+void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Enable counter and interrupt, and set the counter to count
+ * the event that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Set event (if destined for PMNx counters)
+ * We don't need to set the event if it's a cycle count
+ */
+ if (idx != ARMV7_CYCLE_COUNTER)
+ armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+ /*
+ * Enable interrupt for this counter
+ */
+ armv7_pmnc_enable_intens(idx);
+
+ /*
+ * Enable counter
+ */
+ armv7_pmnc_enable_counter(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Disable counter and interrupt
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Disable interrupt for this counter
+ */
+ armv7_pmnc_disable_intens(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * Get and reset the IRQ flags
+ */
+ pmnc = armv7_pmnc_getreset_flags();
+
+ /*
+ * Did an overflow occur?
+ */
+ if (!armv7_pmnc_has_overflowed(pmnc))
+ return IRQ_NONE;
+
+ /*
+ * Handle the counter(s) overflow(s)
+ */
+ regs = get_irq_regs();
+
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts enabled. For
+ * platforms that can have the PMU interrupts raised as a PMI, this
+ * will not work.
+ */
+ perf_event_do_pending();
+
+ return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Enable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Disable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int armv7_a8_pmu_event_map(int config)
+{
+ int mapping = armv7_a8_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static inline int armv7_a9_pmu_event_map(int config)
+{
+ int mapping = armv7_a9_perf_map[config];
+ if (HW_OP_UNSUPPORTED == mapping)
+ mapping = -EOPNOTSUPP;
+ return mapping;
+}
+
+static u64 armv7pmu_raw_event(u64 config)
+{
+ return config & 0xff;
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx;
+
+ /* Always place a cycle counter into the cycle counter. */
+ if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV7_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static struct arm_pmu armv7pmu = {
+ .handle_irq = armv7pmu_handle_irq,
+ .enable = armv7pmu_enable_event,
+ .disable = armv7pmu_disable_event,
+ .raw_event = armv7pmu_raw_event,
+ .read_counter = armv7pmu_read_counter,
+ .write_counter = armv7pmu_write_counter,
+ .get_event_idx = armv7pmu_get_event_idx,
+ .start = armv7pmu_start,
+ .stop = armv7pmu_stop,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+ u32 nb_cnt;
+
+ /* Initialize & Reset PMNC: C and P bits */
+ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+ /* Read the nb of CNTx counters supported from PMNC */
+ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+ /* Add the CPU cycles counter and return */
+ return nb_cnt + 1;
+}
+
+static int __init
+init_hw_perf_events(void)
+{
+ unsigned long cpuid = read_cpuid_id();
+ unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+ unsigned long part_number = (cpuid & 0xFFF0);
+
+ /* We only support ARM CPUs implemented by ARM at the moment. */
+ if (0x41 == implementor) {
+ switch (part_number) {
+ case 0xB360: /* ARM1136 */
+ case 0xB560: /* ARM1156 */
+ case 0xB760: /* ARM1176 */
+ armpmu = &armv6pmu;
+ memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
+ sizeof(armv6_perf_cache_map));
+ perf_max_events = armv6pmu.num_events;
+ break;
+ case 0xB020: /* ARM11mpcore */
+ armpmu = &armv6mpcore_pmu;
+ memcpy(armpmu_perf_cache_map,
+ armv6mpcore_perf_cache_map,
+ sizeof(armv6mpcore_perf_cache_map));
+ perf_max_events = armv6mpcore_pmu.num_events;
+ break;
+ case 0xC080: /* Cortex-A8 */
+ armv7pmu.name = ARMV7_PMU_CORTEX_A8_NAME;
+ memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
+ sizeof(armv7_a8_perf_cache_map));
+ armv7pmu.event_map = armv7_a8_pmu_event_map;
+ armpmu = &armv7pmu;
+
+ /* Reset PMNC and read the nb of CNTx counters
+ supported */
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ perf_max_events = armv7pmu.num_events;
+ break;
+ case 0xC090: /* Cortex-A9 */
+ armv7pmu.name = ARMV7_PMU_CORTEX_A9_NAME;
+ memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
+ sizeof(armv7_a9_perf_cache_map));
+ armv7pmu.event_map = armv7_a9_pmu_event_map;
+ armpmu = &armv7pmu;
+
+ /* Reset PMNC and read the nb of CNTx counters
+ supported */
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ perf_max_events = armv7pmu.num_events;
+ break;
+ default:
+ pr_info("no hardware support available\n");
+ perf_max_events = -1;
+ }
+ }
+
+ if (armpmu)
+ pr_info("enabled with %s PMU driver, %d counters available\n",
+ armpmu->name, armpmu->num_events);
+
+ return 0;
+}
+arch_initcall(init_hw_perf_events);
+
+/*
+ * Callchain handling code.
+ */
+static inline void
+callchain_store(struct perf_callchain_entry *entry,
+ u64 ip)
+{
+ if (entry->nr < PERF_MAX_STACK_DEPTH)
+ entry->ip[entry->nr++] = ip;
+}
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct frame_tail {
+ struct frame_tail *fp;
+ unsigned long sp;
+ unsigned long lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail *
+user_backtrace(struct frame_tail *tail,
+ struct perf_callchain_entry *entry)
+{
+ struct frame_tail buftail;
+
+ /* Also check accessibility of one struct frame_tail beyond */
+ if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+ return NULL;
+ if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
+ return NULL;
+
+ callchain_store(entry, buftail.lr);
+
+ /*
+ * Frame pointers should strictly progress back up the stack
+ * (towards higher addresses).
+ */
+ if (tail >= buftail.fp)
+ return NULL;
+
+ return buftail.fp - 1;
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ struct frame_tail *tail;
+
+ callchain_store(entry, PERF_CONTEXT_USER);
+
+ if (!user_mode(regs))
+ regs = task_pt_regs(current);
+
+ tail = (struct frame_tail *)regs->ARM_fp - 1;
+
+ while (tail && !((unsigned long)tail & 0x3))
+ tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int
+callchain_trace(struct stackframe *fr,
+ void *data)
+{
+ struct perf_callchain_entry *entry = data;
+ callchain_store(entry, fr->pc);
+ return 0;
+}
+
+static void
+perf_callchain_kernel(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ struct stackframe fr;
+
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ fr.fp = regs->ARM_fp;
+ fr.sp = regs->ARM_sp;
+ fr.lr = regs->ARM_lr;
+ fr.pc = regs->ARM_pc;
+ walk_stackframe(&fr, callchain_trace, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ int is_user;
+
+ if (!regs)
+ return;
+
+ is_user = user_mode(regs);
+
+ if (!current || !current->pid)
+ return;
+
+ if (is_user && current->state != TASK_RUNNING)
+ return;
+
+ if (!is_user)
+ perf_callchain_kernel(regs, entry);
+
+ if (current->mm)
+ perf_callchain_user(regs, entry);
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+
+struct perf_callchain_entry *
+perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
+
+ entry->nr = 0;
+ perf_do_callchain(regs, entry);
+ return entry;
+}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
new file mode 100644
index 0000000..a124312
--- /dev/null
+++ b/arch/arm/kernel/pmu.c
@@ -0,0 +1,103 @@
+/*
+ * linux/arch/arm/kernel/pmu.c
+ *
+ * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/pmu.h>
+
+/*
+ * Define the IRQs for the system. We could use something like a platform
+ * device but that seems fairly heavyweight for this. Also, the performance
+ * counters can't be removed or hotplugged.
+ *
+ * Ordering is important: init_pmu() will use the ordering to set the affinity
+ * to the corresponding core. e.g. the first interrupt will go to cpu 0, the
+ * second goes to cpu 1 etc.
+ */
+static const int irqs[] = {
+#if defined(CONFIG_ARCH_OMAP2)
+ 3,
+#elif defined(CONFIG_ARCH_BCMRING)
+ IRQ_PMUIRQ,
+#elif defined(CONFIG_MACH_REALVIEW_EB)
+ IRQ_EB11MP_PMU_CPU0,
+ IRQ_EB11MP_PMU_CPU1,
+ IRQ_EB11MP_PMU_CPU2,
+ IRQ_EB11MP_PMU_CPU3,
+#elif defined(CONFIG_ARCH_OMAP3)
+ INT_34XX_BENCH_MPU_EMUL,
+#elif defined(CONFIG_ARCH_IOP32X)
+ IRQ_IOP32X_CORE_PMU,
+#elif defined(CONFIG_ARCH_IOP33X)
+ IRQ_IOP33X_CORE_PMU,
+#elif defined(CONFIG_ARCH_PXA)
+ IRQ_PMU,
+#endif
+};
+
+static const struct pmu_irqs pmu_irqs = {
+ .irqs = irqs,
+ .num_irqs = ARRAY_SIZE(irqs),
+};
+
+static volatile long pmu_lock;
+
+const struct pmu_irqs *
+reserve_pmu(void)
+{
+ return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) :
+ &pmu_irqs;
+}
+EXPORT_SYMBOL_GPL(reserve_pmu);
+
+int
+release_pmu(const struct pmu_irqs *irqs)
+{
+ if (WARN_ON(irqs != &pmu_irqs))
+ return -EINVAL;
+ clear_bit_unlock(0, &pmu_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(release_pmu);
+
+static int
+set_irq_affinity(int irq,
+ unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+ int err = irq_set_affinity(irq, cpumask_of(cpu));
+ if (err)
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, cpu);
+ return err;
+#else
+ return 0;
+#endif
+}
+
+int
+init_pmu(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pmu_irqs.num_irqs; ++i) {
+ err = set_irq_affinity(pmu_irqs.irqs[i], i);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index a2ea385..08f899f 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -499,10 +499,41 @@
.fn = break_trap,
};
+static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr)
+{
+ unsigned int instr2;
+ void __user *pc;
+
+ /* Check the second half of the instruction. */
+ pc = (void __user *)(instruction_pointer(regs) + 2);
+
+ if (processor_mode(regs) == SVC_MODE) {
+ instr2 = *(u16 *) pc;
+ } else {
+ get_user(instr2, (u16 __user *)pc);
+ }
+
+ if (instr2 == 0xa000) {
+ ptrace_break(current, regs);
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+static struct undef_hook thumb2_break_hook = {
+ .instr_mask = 0xffff,
+ .instr_val = 0xf7f0,
+ .cpsr_mask = PSR_T_BIT,
+ .cpsr_val = PSR_T_BIT,
+ .fn = thumb2_break_trap,
+};
+
static int __init ptrace_break_init(void)
{
register_undef_hook(&arm_break_hook);
register_undef_hook(&thumb_break_hook);
+ register_undef_hook(&thumb2_break_hook);
return 0;
}
@@ -669,7 +700,7 @@
union vfp_state *vfp = &thread->vfpstate;
struct user_vfp __user *ufp = data;
- vfp_sync_state(thread);
+ vfp_sync_hwstate(thread);
/* copy the floating point registers */
if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
@@ -692,7 +723,7 @@
union vfp_state *vfp = &thread->vfpstate;
struct user_vfp __user *ufp = data;
- vfp_sync_state(thread);
+ vfp_sync_hwstate(thread);
/* copy the floating point registers */
if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
@@ -703,6 +734,8 @@
if (get_user(vfp->hard.fpscr, &ufp->fpscr))
return -EFAULT;
+ vfp_flush_hwstate(thread);
+
return 0;
}
#endif
@@ -712,26 +745,10 @@
int ret;
switch (request) {
- /*
- * read word at location "addr" in the child process.
- */
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- break;
-
case PTRACE_PEEKUSR:
ret = ptrace_read_user(child, addr, (unsigned long __user *)data);
break;
- /*
- * write the word at location addr.
- */
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
- break;
-
case PTRACE_POKEUSR:
ret = ptrace_write_user(child, addr, data);
break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 621acad..c91c77b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/fs.h>
+#include <linux/proc_fs.h>
#include <asm/unified.h>
#include <asm/cpu.h>
@@ -118,7 +119,7 @@
static const char *cpu_name;
static const char *machine_name;
-static char __initdata command_line[COMMAND_LINE_SIZE];
+static char __initdata cmd_line[COMMAND_LINE_SIZE];
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
@@ -418,10 +419,11 @@
* Pick out the memory size. We look for mem=size@start,
* where start and size are "size[KkMm]"
*/
-static void __init early_mem(char **p)
+static int __init early_mem(char *p)
{
static int usermem __initdata = 0;
unsigned long size, start;
+ char *endp;
/*
* If the user specifies memory size, we
@@ -434,52 +436,15 @@
}
start = PHYS_OFFSET;
- size = memparse(*p, p);
- if (**p == '@')
- start = memparse(*p + 1, p);
+ size = memparse(p, &endp);
+ if (*endp == '@')
+ start = memparse(endp + 1, NULL);
arm_add_memory(start, size);
+
+ return 0;
}
-__early_param("mem=", early_mem);
-
-/*
- * Initial parsing of the command line.
- */
-static void __init parse_cmdline(char **cmdline_p, char *from)
-{
- char c = ' ', *to = command_line;
- int len = 0;
-
- for (;;) {
- if (c == ' ') {
- extern struct early_params __early_begin, __early_end;
- struct early_params *p;
-
- for (p = &__early_begin; p < &__early_end; p++) {
- int arglen = strlen(p->arg);
-
- if (memcmp(from, p->arg, arglen) == 0) {
- if (to != command_line)
- to -= 1;
- from += arglen;
- p->fn(&from);
-
- while (*from != ' ' && *from != '\0')
- from++;
- break;
- }
- }
- }
- c = *from++;
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *to++ = c;
- }
- *to = '\0';
- *cmdline_p = command_line;
-}
+early_param("mem", early_mem);
static void __init
setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
@@ -740,9 +705,15 @@
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
- memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
- parse_cmdline(cmdline_p, from);
+ /* parse_early_param needs a boot_command_line */
+ strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+ /* populate cmd_line too for later use, preserving boot_command_line */
+ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = cmd_line;
+
+ parse_early_param();
+
paging_init(mdesc);
request_standard_resources(&meminfo, mdesc);
@@ -783,9 +754,21 @@
return 0;
}
-
subsys_initcall(topology_init);
+#ifdef CONFIG_HAVE_PROC_CPU
+static int __init proc_cpu_init(void)
+{
+ struct proc_dir_entry *res;
+
+ res = proc_mkdir("cpu", NULL);
+ if (!res)
+ return -ENOMEM;
+ return 0;
+}
+fs_initcall(proc_cpu_init);
+#endif
+
static const char *hwcap_str[] = {
"swp",
"half",
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d38cdf2..2875380 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -10,11 +10,6 @@
*
* This file contains the ARM-specific time handling details:
* reading the RTC at bootup, etc...
- *
- * 1994-07-02 Alan Modra
- * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
- * 1998-12-20 Updated NTP code according to technical memorandum Jan '96
- * "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/module.h>
#include <linux/kernel.h>
@@ -77,11 +72,6 @@
EXPORT_SYMBOL(profile_pc);
#endif
-/*
- * hook for setting the RTC's idea of the current time.
- */
-int (*set_rtc)(void);
-
#ifndef CONFIG_GENERIC_TIME
static unsigned long dummy_gettimeoffset(void)
{
@@ -89,140 +79,6 @@
}
#endif
-static unsigned long next_rtc_update;
-
-/*
- * If we have an externally synchronized linux clock, then update
- * CMOS clock accordingly every ~11 minutes. set_rtc() has to be
- * called as close as possible to 500 ms before the new second
- * starts.
- */
-static inline void do_set_rtc(void)
-{
- if (!ntp_synced() || set_rtc == NULL)
- return;
-
- if (next_rtc_update &&
- time_before((unsigned long)xtime.tv_sec, next_rtc_update))
- return;
-
- if (xtime.tv_nsec < 500000000 - ((unsigned) tick_nsec >> 1) &&
- xtime.tv_nsec >= 500000000 + ((unsigned) tick_nsec >> 1))
- return;
-
- if (set_rtc())
- /*
- * rtc update failed. Try again in 60s
- */
- next_rtc_update = xtime.tv_sec + 60;
- else
- next_rtc_update = xtime.tv_sec + 660;
-}
-
-#ifdef CONFIG_LEDS
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
- const char name[8];
- int on;
- int off;
-};
-
-static const struct leds_evt_name evt_names[] = {
- { "amber", led_amber_on, led_amber_off },
- { "blue", led_blue_on, led_blue_off },
- { "green", led_green_on, led_green_off },
- { "red", led_red_on, led_red_off },
-};
-
-static ssize_t leds_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
- const char *buf, size_t size)
-{
- int ret = -EINVAL, len = strcspn(buf, " ");
-
- if (len > 0 && buf[len] == '\0')
- len--;
-
- if (strncmp(buf, "claim", len) == 0) {
- leds_event(led_claim);
- ret = size;
- } else if (strncmp(buf, "release", len) == 0) {
- leds_event(led_release);
- ret = size;
- } else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
- if (strlen(evt_names[i].name) != len ||
- strncmp(buf, evt_names[i].name, len) != 0)
- continue;
- if (strncmp(buf+len, " on", 3) == 0) {
- leds_event(evt_names[i].on);
- ret = size;
- } else if (strncmp(buf+len, " off", 4) == 0) {
- leds_event(evt_names[i].off);
- ret = size;
- }
- break;
- }
- }
- return ret;
-}
-
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-
-static int leds_suspend(struct sys_device *dev, pm_message_t state)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static int leds_resume(struct sys_device *dev)
-{
- leds_event(led_start);
- return 0;
-}
-
-static int leds_shutdown(struct sys_device *dev)
-{
- leds_event(led_halted);
- return 0;
-}
-
-static struct sysdev_class leds_sysclass = {
- .name = "leds",
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
-};
-
-static struct sys_device leds_device = {
- .id = 0,
- .cls = &leds_sysclass,
-};
-
-static int __init leds_init(void)
-{
- int ret;
- ret = sysdev_class_register(&leds_sysclass);
- if (ret == 0)
- ret = sysdev_register(&leds_device);
- if (ret == 0)
- ret = sysdev_create_file(&leds_device, &attr_event);
- return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
-#endif
-
#ifdef CONFIG_LEDS_TIMER
static inline void do_leds(void)
{
@@ -295,39 +151,6 @@
EXPORT_SYMBOL(do_settimeofday);
#endif /* !CONFIG_GENERIC_TIME */
-/**
- * save_time_delta - Save the offset between system time and RTC time
- * @delta: pointer to timespec to store delta
- * @rtc: pointer to timespec for current RTC time
- *
- * Return a delta between the system time and the RTC time, such
- * that system time can be restored later with restore_time_delta()
- */
-void save_time_delta(struct timespec *delta, struct timespec *rtc)
-{
- set_normalized_timespec(delta,
- xtime.tv_sec - rtc->tv_sec,
- xtime.tv_nsec - rtc->tv_nsec);
-}
-EXPORT_SYMBOL(save_time_delta);
-
-/**
- * restore_time_delta - Restore the current system time
- * @delta: delta returned by save_time_delta()
- * @rtc: pointer to timespec for current RTC time
- */
-void restore_time_delta(struct timespec *delta, struct timespec *rtc)
-{
- struct timespec ts;
-
- set_normalized_timespec(&ts,
- delta->tv_sec + rtc->tv_sec,
- delta->tv_nsec + rtc->tv_nsec);
-
- do_settimeofday(&ts);
-}
-EXPORT_SYMBOL(restore_time_delta);
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -336,7 +159,6 @@
{
profile_tick(CPU_PROFILING);
do_leds();
- do_set_rtc();
write_seqlock(&xtime_lock);
do_timer(1);
write_sequnlock(&xtime_lock);
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 3f361a7..1621e53 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -12,15 +12,17 @@
* 'linux/arch/arm/lib/traps.S'. Mostly a debugging aid, but will probably
* kill the offending process.
*/
-#include <linux/module.h>
#include <linux/signal.h>
-#include <linux/spinlock.h>
#include <linux/personality.h>
#include <linux/kallsyms.h>
-#include <linux/delay.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
+#include <linux/spinlock.h>
#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/init.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -224,14 +226,21 @@
#define S_SMP ""
#endif
-static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
+static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
{
struct task_struct *tsk = thread->task;
static int die_counter;
+ int ret;
printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
sysfs_printk_last_file();
+
+ /* trap and error numbers are mostly meaningless on ARM */
+ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
+ if (ret == NOTIFY_STOP)
+ return ret;
+
print_modules();
__show_regs(regs);
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
@@ -243,6 +252,8 @@
dump_backtrace(regs, tsk);
dump_instr(KERN_EMERG, regs);
}
+
+ return ret;
}
DEFINE_SPINLOCK(die_lock);
@@ -250,16 +261,21 @@
/*
* This function is protected against re-entrancy.
*/
-NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+void die(const char *str, struct pt_regs *regs, int err)
{
struct thread_info *thread = current_thread_info();
+ int ret;
oops_enter();
spin_lock_irq(&die_lock);
console_verbose();
bust_spinlocks(1);
- __die(str, err, thread, regs);
+ ret = __die(str, err, thread, regs);
+
+ if (regs && kexec_should_crash(thread->task))
+ crash_kexec(regs);
+
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
@@ -267,11 +283,10 @@
if (in_interrupt())
panic("Fatal exception in interrupt");
-
if (panic_on_oops)
panic("Fatal exception");
-
- do_exit(SIGSEGV);
+ if (ret != NOTIFY_STOP)
+ do_exit(SIGSEGV);
}
void arm_notify_die(const char *str, struct pt_regs *regs,
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4957e13e..b16c079 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -43,10 +43,6 @@
INIT_SETUP(16)
- __early_begin = .;
- *(.early_param.init)
- __early_end = .;
-
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 0b6351d..a9cac36 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0b2ee95..2db43a5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -89,6 +89,12 @@
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+config ARCH_AT572D940HF
+ bool "AT572D940HF"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91X40
bool "AT91x40"
@@ -390,6 +396,23 @@
# ----------------------------------------------------------
+if ARCH_AT572D940HF
+
+comment "AT572D940HF Board Type"
+
+config MACH_AT572D940HFEB
+ bool "AT572D940HF-EK"
+ depends on ARCH_AT572D940HF
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+ help
+ Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+ <http://www.atmel.com/products/diopsis/default.asp>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 709fbad..027dd57 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -69,6 +70,9 @@
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
+# AT572D940HF board-specific support
+obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
+
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
new file mode 100644
index 0000000..a6b9c68
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf.c
@@ -0,0 +1,377 @@
+/*
+ * arch/arm/mach-at91/at572d940hf.c
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at572d940hf.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at572d940hf_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
+ .length = AT572D940HF_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+ .name = "ssc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc3_clk = {
+ .name = "ssc3_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_SSC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+ .name = "can0_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can1_clk = {
+ .name = "can1_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_CAN1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mAgicV_clk = {
+ .name = "mAgicV_clk",
+ .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &macb_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi0_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ssc2_clk,
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &ohci_clk,
+ &ssc3_clk,
+ &twi1_clk,
+ &can0_clk,
+ &can1_clk,
+ &mAgicV_clk,
+ /* irq0 .. irq2 */
+};
+
+/*
+ * The five programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static struct clk mAgicV_mem_clk = {
+ .name = "mAgicV_mem_clk",
+ .pmc_mask = AT91_PMC_PCK4,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 4,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
+static void __init at572d940hf_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+ clk_register(&mAgicV_mem_clk);
+
+ clk_register(&hck0);
+ clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at572d940hf_gpio[] = {
+ {
+ .id = AT572D940HF_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT572D940HF_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at572d940hf_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT572D940HF processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at572d940hf_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
+
+ at91_arch_reset = at572d940hf_reset;
+ at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
+ | (1 << AT572D940HF_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at572d940hf_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at572d940hf_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 3, /* Ethernet */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface 0 */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* Serial Synchronous Controller 3 */
+ 0, /* Two-Wire Interface 1 */
+ 0, /* CAN Controller 0 */
+ 0, /* CAN Controller 1 */
+ 0, /* mAgicV HALT line */
+ 0, /* mAgicV SIRQ0 line */
+ 0, /* mAgicV exception line */
+ 0, /* mAgicV end of DMA line */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at572d940hf_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
+
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
new file mode 100644
index 0000000..0fc20a2
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -0,0 +1,970 @@
+/*
+ * arch/arm/mach-at91/at572d940hf_devices.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at572d940hf.h>
+#include <mach/at572d940hf_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+#include "sam9_smc.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT572D940HF_UHP_BASE,
+ .end = AT572D940HF_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UHP,
+ .end = AT572D940HF_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at572d940hf_usbh_device);
+
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_UDP,
+ .end = AT572D940HF_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_UDP,
+ .end = AT572D940HF_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally */
+
+ udc_data = *data;
+ platform_device_register(&at572d940hf_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_EMAC,
+ .end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_EMAC,
+ .end = AT572D940HF_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Only RMII is supported */
+ data->is_rmii = 1;
+
+ /* Pins used for RMII */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
+
+ eth_data = *data;
+ platform_device_register(&at572d940hf_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_MCI,
+ .end = AT572D940HF_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_MCI,
+ .end = AT572D940HF_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PC22, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PC23, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PC24, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PC25, 1);
+ at91_set_A_periph(AT91_PIN_PC26, 1);
+ at91_set_A_periph(AT91_PIN_PC27, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at572d940hf_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at572d940hf_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PC7,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PC8,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at572d940hf_twi_device {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI0,
+ .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI0,
+ .end = AT572D940HF_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TWI1,
+ .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TWI1,
+ .end = AT572D940HF_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI0 interface */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+ /* pins used for TWI1 interface */
+ at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PC20, 1);
+
+ at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PC21, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at572d940hf_twi0_device);
+ platform_device_register(&at572d940hf_twi1_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI0,
+ .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI0,
+ .end = AT572D940HF_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_SPI1,
+ .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_SPI1,
+ .end = AT572D940HF_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
+ platform_device_register(&at572d940hf_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_TCB,
+ .end = AT572D940HF_BASE_TCB + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_TC0,
+ .end = AT572D940HF_ID_TC0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AT572D940HF_ID_TC1,
+ .end = AT572D940HF_ID_TC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = AT572D940HF_ID_TC2,
+ .end = AT572D940HF_ID_TC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at572d940hf_tcb_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb_resources,
+ .num_resources = ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has a separate clock and irq for each TC channel */
+ at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
+ at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
+ at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
+ platform_device_register(&at572d940hf_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at572d940hf_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at572d940hf_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct platform_device at572d940hf_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at572d940hf_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US0,
+ .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US0,
+ .end = AT572D940HF_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US1,
+ .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US1,
+ .end = AT572D940HF_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT572D940HF_BASE_US2,
+ .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT572D940HF_ID_US2,
+ .end = AT572D940HF_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at572d940hf_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US0:
+ pdev = &at572d940hf_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US1:
+ pdev = &at572d940hf_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT572D940HF_ID_US2:
+ pdev = &at572d940hf_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * mAgic
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_MAGICV
+static struct resource mAgic_resources[] = {
+ {
+ .start = AT91_MAGIC_PM_BASE,
+ .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_I_BASE,
+ .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_F_BASE,
+ .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_DM_DB_BASE,
+ .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_REGS_BASE,
+ .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT91_MAGIC_EXTPAGE_BASE,
+ .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = AT572D940HF_ID_MSIRQ0,
+ .end = AT572D940HF_ID_MSIRQ0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MHALT,
+ .end = AT572D940HF_ID_MHALT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEXC,
+ .end = AT572D940HF_ID_MEXC,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AT572D940HF_ID_MEDMA,
+ .end = AT572D940HF_ID_MEDMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mAgic_device = {
+ .name = "mAgic",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mAgic_resources),
+ .resource = mAgic_resources,
+};
+
+void __init at91_add_device_mAgic(void)
+{
+ platform_device_register(&mAgic_device);
+}
+#else
+void __init at91_add_device_mAgic(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
new file mode 100644
index 0000000..5daff27
--- /dev/null
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -0,0 +1,328 @@
+/*
+ * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init eb_map_io(void)
+{
+ /* Initialize processor: 12.500 MHz crystal */
+ at572d940hf_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2. (Rx & Tx only) */
+ at91_register_uart(AT572D940HF_ID_US1, 2, 0);
+
+ /* USART2 on ttyS3. (Tx & Rx only */
+ at91_register_uart(AT572D940HF_ID_US2, 3, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init eb_init_irq(void)
+{
+ at572d940hf_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata eb_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata eb_udc_data = {
+ .vbus_pin = 0, /* no VBUS detection,UDC always on */
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata eb_mmc_data = {
+ .wire4 = 1,
+/* .det_pin = ... not connected */
+/* .wp_pin = ... not connected */
+/* .vcc_pin = ... not connected */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata eb_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB25,
+ .is_rmii = 1,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct mtd_partition eb_nor_partitions[] = {
+ {
+ .name = "Raw Environment",
+ .offset = 0,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "OS FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 3 * SZ_1M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "APP FS",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static void nor_flash_set_vpp(struct map_info* mi, int i) {
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = eb_nor_partitions,
+ .nr_parts = ARRAY_SIZE(eb_nor_partitions),
+ .set_vpp = nor_flash_set_vpp,
+};
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static struct sam9_smc_config __initdata eb_nor_smc_config = {
+ .ncs_read_setup = 1,
+ .nrd_setup = 1,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 7,
+ .nrd_pulse = 7,
+ .ncs_write_pulse = 7,
+ .nwe_pulse = 7,
+
+ .read_cycle = 9,
+ .write_cycle = 9,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
+ .tdf_cycles = 1,
+};
+
+static void __init eb_add_device_nor(void)
+{
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &eb_nor_smc_config);
+ platform_device_register(&nor_flash);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata eb_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_16M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(eb_nand_partition);
+ return eb_nand_partition;
+}
+
+static struct atmel_nand_data __initdata eb_nand_data = {
+ .ale = 22,
+ .cle = 21,
+/* .det_pin = ... not connected */
+/* .rdy_pin = AT91_PIN_PC16, */
+ .enable_pin = AT91_PIN_PA15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata eb_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 0,
+ .ncs_write_setup = 1,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 12,
+};
+
+static void __init eb_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (eb_nand_data.bus_width_16)
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &eb_nand_smc_config);
+
+ at91_add_device_nand(&eb_nand_data);
+}
+
+
+/*
+ * SPI devices
+ */
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = AT572D940HF_ID_IRQ1,
+ .end = AT572D940HF_ID_IRQ1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ds1305_platform_data ds1306_data = {
+ .is_ds1306 = true,
+ .en_1hz = false,
+};
+
+static struct spi_board_info eb_spi_devices[] = {
+ { /* RTC Dallas DS1306 */
+ .modalias = "rtc-ds1305",
+ .chip_select = 3,
+ .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
+ .max_speed_hz = 500000,
+ .bus_num = 0,
+ .irq = AT572D940HF_ID_IRQ1,
+ .platform_data = (void *) &ds1306_data,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* Dataflash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+static void __init eb_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&eb_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&eb_udc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* NOR */
+ eb_add_device_nor();
+ /* NAND */
+ eb_add_device_nand();
+ /* SPI */
+ at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &eb_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&eb_eth_data);
+ /* mAgic */
+ at91_add_device_mAgic();
+}
+
+MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
+ /* Maintainer: Atmel <costa.antonior@gmail.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = eb_map_io,
+ .init_irq = eb_init_irq,
+ .init_machine = eb_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index c042dcf..7f7da43 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -29,6 +29,7 @@
#include <mach/cpu.h>
#include "clock.h"
+#include "generic.h"
/*
@@ -628,7 +629,7 @@
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10()) {
+ cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -711,12 +712,13 @@
/*
* USB HS clock init
*/
- if (cpu_has_utmi())
+ if (cpu_has_utmi()) {
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+ }
/*
* USB FS clock init
@@ -746,7 +748,7 @@
mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
- mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
/* Register the PMC's standard clocks */
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index 1ba3b95..6cf4b78 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -22,7 +22,7 @@
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
- unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+ unsigned id:3; /* PCK0..4, or 32k/main/a/b */
unsigned type; /* clock type */
u16 users;
};
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 88e413b..65c3dc5 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -17,6 +17,7 @@
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
+extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -27,6 +28,7 @@
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
new file mode 100644
index 0000000..2d9b0af
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach/at572d940hf.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef AT572D940HF_H
+#define AT572D940HF_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
+#define AT572D940HF_ID_US0 6 /* USART 0 */
+#define AT572D940HF_ID_US1 7 /* USART 1 */
+#define AT572D940HF_ID_US2 8 /* USART 2 */
+#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
+#define AT572D940HF_ID_UDP 10 /* USB Device Port */
+#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
+#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
+#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
+#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
+#define AT572D940HF_ID_UHP 20 /* USB Host port */
+#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
+#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
+#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
+#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
+#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
+#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
+#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
+#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
+#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
+#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
+#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT572D940HF_BASE_TCB 0xfffa0000
+#define AT572D940HF_BASE_TC0 0xfffa0000
+#define AT572D940HF_BASE_TC1 0xfffa0040
+#define AT572D940HF_BASE_TC2 0xfffa0080
+#define AT572D940HF_BASE_UDP 0xfffa4000
+#define AT572D940HF_BASE_MCI 0xfffa8000
+#define AT572D940HF_BASE_TWI0 0xfffac000
+#define AT572D940HF_BASE_US0 0xfffb0000
+#define AT572D940HF_BASE_US1 0xfffb4000
+#define AT572D940HF_BASE_US2 0xfffb8000
+#define AT572D940HF_BASE_SSC0 0xfffbc000
+#define AT572D940HF_BASE_SSC1 0xfffc0000
+#define AT572D940HF_BASE_SSC2 0xfffc4000
+#define AT572D940HF_BASE_SPI0 0xfffc8000
+#define AT572D940HF_BASE_SPI1 0xfffcc000
+#define AT572D940HF_BASE_SSC3 0xfffd0000
+#define AT572D940HF_BASE_TWI1 0xfffd4000
+#define AT572D940HF_BASE_EMAC 0xfffd8000
+#define AT572D940HF_BASE_CAN0 0xfffdc000
+#define AT572D940HF_BASE_CAN1 0xfffe0000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT572D940HF_ID_US0
+#define AT91_USART1 AT572D940HF_ID_US1
+#define AT91_USART2 AT572D940HF_ID_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
+
+#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
new file mode 100644
index 0000000..b6751df
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach//at572d940hf_matrix.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef AT572D940HF_MATRIX_H
+#define AT572D940HF_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
+#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
+#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
+#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
+#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
+#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
+#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
+#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
+#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
+#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
+#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
+#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
+#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
+#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
+#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
+#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
+
+
+/*
+ * The following registers / bits are not defined in the Datasheet (Revision A)
+ */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 64589ea..e46f93e 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -32,6 +32,7 @@
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index bb6f6a7..ceaec6c 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -87,7 +87,7 @@
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+ || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
#define eth_platform_data at91_eth_data
#endif
@@ -205,6 +205,9 @@
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
+ /* AT572D940HF DSP */
+extern void __init at91_add_device_mAgic(void);
+
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c22df30..5a06501 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -33,6 +33,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+#define ARCH_ID_AT572D940HF 0x0e0303e0
+
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -141,6 +143,12 @@
#define cpu_is_at91cap9_revC() (0)
#endif
+#ifdef CONFIG_ARCH_AT572D940HF
+#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
+#else
+#define cpu_is_at572d940hf() (0)
+#endif
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 29052ba..9e750a1 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a0df8b0..3d64a75 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -32,6 +32,8 @@
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
+#elif defined(CONFIG_ARCH_AT572D940HF)
+#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..05a6e8a 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -82,6 +82,11 @@
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
+#elif defined(CONFIG_ARCH_AT572D940HF)
+
+#define AT572D940HF_MASTER_CLOCK 80000000
+#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
+
#endif
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index e590bbe..72e405d 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -142,8 +142,7 @@
chipcHw_busInterfaceClockEnable(bus_clock);
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 64baf9f..fedd807 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <asm/hardware/clps7111.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #CLPS7111_PHYS_BASE
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 033bfed..0ebe185 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -91,10 +91,14 @@
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
+ select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
+config MACH_DAVINCI_DM6467TEVM
+ bool
+
config MACH_DAVINCI_DM365_EVM
bool "TI DM365 EVM"
default ARCH_DAVINCI_DM365
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index eeb9230..6aac880 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -26,7 +26,7 @@
obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o
obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o
obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
@@ -34,3 +34,4 @@
# Power Management
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 31dc990..dc19870 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -112,7 +112,7 @@
* Set up USB clock/mode in the CFGCHIP2 register.
* FYI: CFGCHIP2 is 0x0000ef00 initially.
*/
- cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB2.0 PHY reference clock is 24 MHz */
cfgchip2 &= ~CFGCHIP2_REFFREQ;
@@ -139,7 +139,7 @@
cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
#endif
- __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 07de8db..411284d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -46,8 +46,20 @@
static struct mtd_partition da850_evm_norflash_partition[] = {
{
- .name = "NOR filesystem",
+ .name = "bootloaders + env",
.offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
@@ -77,6 +89,18 @@
.resource = da850_evm_norflash_resource,
};
+static struct davinci_pm_config da850_pm_pdata = {
+ .sleepcount = 128,
+};
+
+static struct platform_device da850_pm_device = {
+ .name = "pm-davinci",
+ .dev = {
+ .platform_data = &da850_pm_pdata,
+ },
+ .id = -1,
+};
+
/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
* (128K blocks). It may be used instead of the (default) SPI flash
* to boot, using TI's tools to install the secondary boot loader
@@ -119,6 +143,7 @@
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 4,
.options = NAND_USE_FLASH_BBT,
};
@@ -537,7 +562,7 @@
if (!machine_is_davinci_da850_evm())
return 0;
- cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
@@ -696,6 +721,11 @@
if (ret)
pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
ret);
+
+ ret = da850_register_pm(&da850_pm_device);
+ if (ret)
+ pr_warning("da850_evm_init: suspend registration failed: %d\n",
+ ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 077ecf4..aa48e3f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -111,6 +111,8 @@
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 400 /* kHz */,
.bus_delay = 0 /* usec */,
+ .sda_pin = 15,
+ .scl_pin = 14,
};
static struct snd_platform_data dm355_evm_snd_data;
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 38e9033..d15bece 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -24,6 +24,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -571,6 +573,24 @@
dm365_init();
}
+static struct spi_eeprom at25640 = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
static __init void dm365_evm_init(void)
{
evm_init_i2c();
@@ -587,6 +607,9 @@
dm365_init_asp(&dm365_evm_snd_data);
dm365_init_rtc();
dm365_init_ks(&dm365evm_ks_data);
+
+ dm365_init_spi0(BIT(0), dm365_evm_spi_info,
+ ARRAY_SIZE(dm365_evm_spi_info));
}
static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e9612cf..976e11b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -629,6 +629,8 @@
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 20 /* kHz */,
.bus_delay = 100 /* usec */,
+ .sda_pin = 44,
+ .scl_pin = 43,
};
static void __init evm_init_i2c(void)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8d0b0e0..5ba3cb2 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -30,6 +30,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,54 +40,13 @@
#include <mach/serial.h>
#include <mach/i2c.h>
#include <mach/nand.h>
+#include <mach/clock.h>
+#include <mach/cdce949.h>
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
+#include "clock.h"
#define NAND_BLOCK_SIZE SZ_128K
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST BIT(0)
-#define DM646X_EVM_ATA_PWD BIT(1)
-
-#define DM646X_EVM_PHY_MASK (0x2)
-#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
-#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38)
-#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
-#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8 (BIT(9))
-#define VCH2CLK_AUXCLK (BIT(9) | BIT(8))
-#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8 (BIT(13))
-#define VCH3CLK_AUXCLK (BIT(14) | BIT(13))
-
-#define VIDCH2CLK (BIT(10))
-#define VIDCH3CLK (BIT(11))
-#define VIDCH1CLK (BIT(4))
-#define TVP7002_INPUT (BIT(4))
-#define TVP5147_INPUT (~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL (BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL (~BIT(5))
-#define TVP5147_CH0 "tvp514x-0"
-#define TVP5147_CH1 "tvp514x-1"
-
-static void __iomem *vpif_vidclkctl_reg;
-static void __iomem *vpif_vsclkdis_reg;
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
* and U-Boot environment this avoids dependency on any particular combination
* of UBL, U-Boot or flashing tools etc.
@@ -120,6 +80,9 @@
.options = 0,
};
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
+
static struct resource davinci_nand_resources[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
@@ -144,6 +107,17 @@
},
};
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST BIT(0)
+#define DM646X_EVM_ATA_PWD BIT(1)
+
/* CPLD Register 0 Client: used for I/O Control */
static int cpld_reg0_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -417,6 +391,9 @@
{
I2C_BOARD_INFO("cpld_video", 0x3b),
},
+ {
+ I2C_BOARD_INFO("cdce949", 0x6c),
+ },
};
static struct davinci_i2c_platform_data i2c_pdata = {
@@ -424,6 +401,30 @@
.bus_delay = 0 /* usec */,
};
+#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8 (BIT(9))
+#define VCH2CLK_AUXCLK (BIT(9) | BIT(8))
+#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8 (BIT(13))
+#define VCH3CLK_AUXCLK (BIT(14) | BIT(13))
+
+#define VIDCH2CLK (BIT(10))
+#define VIDCH3CLK (BIT(11))
+#define VIDCH1CLK (BIT(4))
+#define TVP7002_INPUT (BIT(4))
+#define TVP5147_INPUT (~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL (BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL (~BIT(5))
+#define TVP5147_CH0 "tvp514x-0"
+#define TVP5147_CH1 "tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
static int set_vpif_clock(int mux_mode, int hd)
{
unsigned long flags;
@@ -685,11 +686,44 @@
evm_init_video();
}
+#define CDCE949_XIN_RATE 27000000
+
+/* CDCE949 support - "lpsc" field is overridden to work as clock number */
+static struct clk cdce_clk_in = {
+ .name = "cdce_xin",
+ .rate = CDCE949_XIN_RATE,
+};
+
+static struct clk_lookup cdce_clks[] = {
+ CLK(NULL, "xin", &cdce_clk_in),
+ CLK(NULL, NULL, NULL),
+};
+
+static void __init cdce_clk_init(void)
+{
+ struct clk_lookup *c;
+ struct clk *clk;
+
+ for (c = cdce_clks; c->clk; c++) {
+ clk = c->clk;
+ clkdev_add(c);
+ clk_register(clk);
+ }
+}
+
static void __init davinci_map_io(void)
{
dm646x_init();
+ cdce_clk_init();
}
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+#define DM646X_EVM_PHY_MASK (0x2)
+#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
static __init void evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -713,6 +747,17 @@
davinci_irq_init();
}
+#define DM646X_EVM_REF_FREQ 27000000
+#define DM6467T_EVM_REF_FREQ 33000000
+
+void __init dm646x_board_setup_refclk(struct clk *clk)
+{
+ if (machine_is_davinci_dm6467tevm())
+ clk->rate = DM6467T_EVM_REF_FREQ;
+ else
+ clk->rate = DM646X_EVM_REF_FREQ;
+}
+
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
@@ -723,3 +768,13 @@
.init_machine = evm_init,
MACHINE_END
+MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = davinci_map_io,
+ .init_irq = davinci_dm646x_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
new file mode 100644
index 0000000..aec3756
--- /dev/null
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -0,0 +1,293 @@
+/*
+ * TI CDCE949 clock synthesizer driver
+ *
+ * Note: This implementation assumes an input of 27MHz to the CDCE.
+ * This is by no means constrained by CDCE hardware although the datasheet
+ * does use this as an example for all illustrations and more importantly:
+ * that is the crystal input on boards it is currently used on.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <mach/clock.h>
+
+#include "clock.h"
+
+static struct i2c_client *cdce_i2c_client;
+static DEFINE_MUTEX(cdce_mutex);
+
+/* CDCE register descriptor */
+struct cdce_reg {
+ u8 addr;
+ u8 val;
+};
+
+/* Per-Output (Y1, Y2 etc.) frequency descriptor */
+struct cdce_freq {
+ /* Frequency in KHz */
+ unsigned long frequency;
+ /*
+ * List of registers to program to obtain a particular frequency.
+ * 0x0 in register address and value is the end of list marker.
+ */
+ struct cdce_reg *reglist;
+};
+
+#define CDCE_FREQ_TABLE_ENTRY(line, out) \
+{ \
+ .reglist = cdce_y ##line## _ ##out, \
+ .frequency = out, \
+}
+
+/* List of CDCE outputs */
+struct cdce_output {
+ /* List of frequencies on this output */
+ struct cdce_freq *freq_table;
+ /* Number of possible frequencies */
+ int size;
+};
+
+/*
+ * Finding out the values to program into CDCE949 registers for a particular
+ * frequency output is not a simple calculation. Have a look at the datasheet
+ * for the details. There is desktop software available to help users with
+ * the calculations. Here, we just depend on the output of that software
+ * (or hand calculations) instead trying to runtime calculate the register
+ * values and inflicting misery on ourselves.
+ */
+static struct cdce_reg cdce_y1_148500[] = {
+ { 0x13, 0x00 },
+ /* program PLL1_0 multiplier */
+ { 0x18, 0xaf },
+ { 0x19, 0x50 },
+ { 0x1a, 0x02 },
+ { 0x1b, 0xc9 },
+ /* program PLL1_11 multiplier */
+ { 0x1c, 0x00 },
+ { 0x1d, 0x40 },
+ { 0x1e, 0x02 },
+ { 0x1f, 0xc9 },
+ /* output state selection */
+ { 0x15, 0x00 },
+ { 0x14, 0xef },
+ /* switch MUX to PLL1 output */
+ { 0x14, 0x6f },
+ { 0x16, 0x06 },
+ /* set P2DIV divider, P3DIV and input crystal */
+ { 0x17, 0x06 },
+ { 0x01, 0x00 },
+ { 0x05, 0x48 },
+ { 0x02, 0x80 },
+ /* enable and disable PLL */
+ { 0x02, 0xbc },
+ { 0x03, 0x01 },
+ { },
+};
+
+static struct cdce_reg cdce_y1_74250[] = {
+ { 0x13, 0x00 },
+ { 0x18, 0xaf },
+ { 0x19, 0x50 },
+ { 0x1a, 0x02 },
+ { 0x1b, 0xc9 },
+ { 0x1c, 0x00 },
+ { 0x1d, 0x40 },
+ { 0x1e, 0x02 },
+ { 0x1f, 0xc9 },
+ /* output state selection */
+ { 0x15, 0x00 },
+ { 0x14, 0xef },
+ /* switch MUX to PLL1 output */
+ { 0x14, 0x6f },
+ { 0x16, 0x06 },
+ /* set P2DIV divider, P3DIV and input crystal */
+ { 0x17, 0x06 },
+ { 0x01, 0x00 },
+ { 0x05, 0x48 },
+ { 0x02, 0x80 },
+ /* enable and disable PLL */
+ { 0x02, 0xbc },
+ { 0x03, 0x02 },
+ { },
+};
+
+static struct cdce_reg cdce_y1_27000[] = {
+ { 0x13, 0x00 },
+ { 0x18, 0x00 },
+ { 0x19, 0x40 },
+ { 0x1a, 0x02 },
+ { 0x1b, 0x08 },
+ { 0x1c, 0x00 },
+ { 0x1d, 0x40 },
+ { 0x1e, 0x02 },
+ { 0x1f, 0x08 },
+ { 0x15, 0x02 },
+ { 0x14, 0xed },
+ { 0x16, 0x01 },
+ { 0x17, 0x01 },
+ { 0x01, 0x00 },
+ { 0x05, 0x50 },
+ { 0x02, 0xb4 },
+ { 0x03, 0x01 },
+ { },
+};
+
+static struct cdce_freq cdce_y1_freqs[] = {
+ CDCE_FREQ_TABLE_ENTRY(1, 148500),
+ CDCE_FREQ_TABLE_ENTRY(1, 74250),
+ CDCE_FREQ_TABLE_ENTRY(1, 27000),
+};
+
+static struct cdce_reg cdce_y5_13500[] = {
+ { 0x27, 0x08 },
+ { 0x28, 0x00 },
+ { 0x29, 0x40 },
+ { 0x2a, 0x02 },
+ { 0x2b, 0x08 },
+ { 0x24, 0x6f },
+ { },
+};
+
+static struct cdce_reg cdce_y5_16875[] = {
+ { 0x27, 0x08 },
+ { 0x28, 0x9f },
+ { 0x29, 0xb0 },
+ { 0x2a, 0x02 },
+ { 0x2b, 0x89 },
+ { 0x24, 0x6f },
+ { },
+};
+
+static struct cdce_reg cdce_y5_27000[] = {
+ { 0x27, 0x04 },
+ { 0x28, 0x00 },
+ { 0x29, 0x40 },
+ { 0x2a, 0x02 },
+ { 0x2b, 0x08 },
+ { 0x24, 0x6f },
+ { },
+};
+static struct cdce_reg cdce_y5_54000[] = {
+ { 0x27, 0x04 },
+ { 0x28, 0xff },
+ { 0x29, 0x80 },
+ { 0x2a, 0x02 },
+ { 0x2b, 0x07 },
+ { 0x24, 0x6f },
+ { },
+};
+
+static struct cdce_reg cdce_y5_81000[] = {
+ { 0x27, 0x02 },
+ { 0x28, 0xbf },
+ { 0x29, 0xa0 },
+ { 0x2a, 0x03 },
+ { 0x2b, 0x0a },
+ { 0x24, 0x6f },
+ { },
+};
+
+static struct cdce_freq cdce_y5_freqs[] = {
+ CDCE_FREQ_TABLE_ENTRY(5, 13500),
+ CDCE_FREQ_TABLE_ENTRY(5, 16875),
+ CDCE_FREQ_TABLE_ENTRY(5, 27000),
+ CDCE_FREQ_TABLE_ENTRY(5, 54000),
+ CDCE_FREQ_TABLE_ENTRY(5, 81000),
+};
+
+
+static struct cdce_output output_list[] = {
+ [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) },
+ [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) },
+};
+
+int cdce_set_rate(struct clk *clk, unsigned long rate)
+{
+ int i, ret = 0;
+ struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table;
+ struct cdce_reg *regs = NULL;
+
+ if (!cdce_i2c_client)
+ return -ENODEV;
+
+ if (!freq_table)
+ return -EINVAL;
+
+ for (i = 0; i < output_list[clk->lpsc].size; i++) {
+ if (freq_table[i].frequency == rate / 1000) {
+ regs = freq_table[i].reglist;
+ break;
+ }
+ }
+
+ if (!regs)
+ return -EINVAL;
+
+ mutex_lock(&cdce_mutex);
+ for (i = 0; regs[i].addr; i++) {
+ ret = i2c_smbus_write_byte_data(cdce_i2c_client,
+ regs[i].addr | 0x80, regs[i].val);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&cdce_mutex);
+
+ if (!ret)
+ clk->rate = rate;
+
+ return ret;
+}
+
+static int cdce_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ cdce_i2c_client = client;
+ return 0;
+}
+
+static int __devexit cdce_remove(struct i2c_client *client)
+{
+ cdce_i2c_client = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id cdce_id[] = {
+ {"cdce949", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, cdce_id);
+
+static struct i2c_driver cdce_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cdce949",
+ },
+ .probe = cdce_probe,
+ .remove = __devexit_p(cdce_remove),
+ .id_table = cdce_id,
+};
+
+static int __init cdce_init(void)
+{
+ return i2c_add_driver(&cdce_driver);
+}
+subsys_initcall(cdce_init);
+
+static void __exit cdce_exit(void)
+{
+ i2c_del_driver(&cdce_driver);
+}
+module_exit(cdce_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("CDCE949 clock synthesizer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index baece65..bf6218e 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -49,7 +49,8 @@
{
if (WARN_ON(clk->usecount == 0))
return;
- if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
+ (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
@@ -124,9 +125,10 @@
if (clk == NULL || IS_ERR(clk))
return ret;
- spin_lock_irqsave(&clockfw_lock, flags);
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
+
+ spin_lock_irqsave(&clockfw_lock, flags);
if (ret == 0) {
if (clk->recalc)
clk->rate = clk->recalc(clk);
@@ -363,6 +365,7 @@
{
u32 ctrl;
unsigned int locktime;
+ unsigned long flags;
if (pll->base == NULL)
return -EINVAL;
@@ -376,25 +379,23 @@
locktime = ((2000 * prediv) / 100);
prediv = (prediv - 1) | PLLDIV_EN;
} else {
- locktime = 20;
+ locktime = PLL_LOCK_TIME;
}
if (postdiv)
postdiv = (postdiv - 1) | PLLDIV_EN;
if (mult)
mult = mult - 1;
+ /* Protect against simultaneous calls to PLL setting seqeunce */
+ spin_lock_irqsave(&clockfw_lock, flags);
+
ctrl = __raw_readl(pll->base + PLLCTL);
/* Switch the PLL to bypass mode */
ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
__raw_writel(ctrl, pll->base + PLLCTL);
- /*
- * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
- * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
- * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
- */
- udelay(1);
+ udelay(PLL_BYPASS_TIME);
/* Reset and enable PLL */
ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
@@ -408,11 +409,7 @@
if (pll->flags & PLL_HAS_POSTDIV)
__raw_writel(postdiv, pll->base + POSTDIV);
- /*
- * Wait for PLL to reset properly, OMAP-L138 datasheet says
- * 'min' time = 125ns
- */
- udelay(1);
+ udelay(PLL_RESET_TIME);
/* Bring PLL out of reset */
ctrl |= PLLCTL_PLLRST;
@@ -424,17 +421,20 @@
ctrl |= PLLCTL_PLLEN;
__raw_writel(ctrl, pll->base + PLLCTL);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
return 0;
}
EXPORT_SYMBOL(davinci_set_pllrate);
-int __init davinci_clk_init(struct davinci_clk *clocks)
+int __init davinci_clk_init(struct clk_lookup *clocks)
{
- struct davinci_clk *c;
+ struct clk_lookup *c;
struct clk *clk;
+ size_t num_clocks = 0;
- for (c = clocks; c->lk.clk; c++) {
- clk = c->lk.clk;
+ for (c = clocks; c->clk; c++) {
+ clk = c->clk;
if (!clk->recalc) {
@@ -457,36 +457,24 @@
if (clk->lpsc)
clk->flags |= CLK_PSC;
- clkdev_add(&c->lk);
clk_register(clk);
+ num_clocks++;
/* Turn on clocks that Linux doesn't otherwise manage */
if (clk->flags & ALWAYS_ENABLED)
clk_enable(clk);
}
+ clkdev_add_table(clocks, num_clocks);
+
return 0;
}
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
-static void *davinci_ck_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *davinci_ck_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return NULL;
-}
-
-static void davinci_ck_stop(struct seq_file *m, void *v)
-{
-}
-
#define CLKNAME_MAX 10 /* longest clock name */
#define NEST_DELTA 2
#define NEST_MAX 4
@@ -525,41 +513,38 @@
static int davinci_ck_show(struct seq_file *m, void *v)
{
- /* Show clock tree; we know the main oscillator is first.
- * We trust nonzero usecounts equate to PSC enables...
+ struct clk *clk;
+
+ /*
+ * Show clock tree; We trust nonzero usecounts equate to PSC enables...
*/
mutex_lock(&clocks_mutex);
- if (!list_empty(&clocks))
- dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ list_for_each_entry(clk, &clocks, node)
+ if (!clk->parent)
+ dump_clock(m, 0, clk);
mutex_unlock(&clocks_mutex);
return 0;
}
-static const struct seq_operations davinci_ck_op = {
- .start = davinci_ck_start,
- .next = davinci_ck_next,
- .stop = davinci_ck_stop,
- .show = davinci_ck_show
-};
-
static int davinci_ck_open(struct inode *inode, struct file *file)
{
- return seq_open(file, &davinci_ck_op);
+ return single_open(file, davinci_ck_show, NULL);
}
-static const struct file_operations proc_davinci_ck_operations = {
+static const struct file_operations davinci_ck_operations = {
.open = davinci_ck_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = single_release,
};
-static int __init davinci_ck_proc_init(void)
+static int __init davinci_clk_debugfs_init(void)
{
- proc_create("davinci_clocks", 0, NULL, &proc_davinci_ck_operations);
+ debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL,
+ &davinci_ck_operations);
return 0;
}
-__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+device_initcall(davinci_clk_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index c92d77a..aa0a611 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -12,9 +12,6 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
-#include <linux/list.h>
-#include <asm/clkdev.h>
-
#define DAVINCI_PLL1_BASE 0x01c40800
#define DAVINCI_PLL2_BASE 0x01c40c00
#define MAX_PLL 2
@@ -53,6 +50,26 @@
#define PLLDIV_EN BIT(15)
#define PLLDIV_RATIO_MASK 0x1f
+/*
+ * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
+ * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
+ * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
+ * is ~25MHz. Units are micro seconds.
+ */
+#define PLL_BYPASS_TIME 1
+/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
+#define PLL_RESET_TIME 1
+/*
+ * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
+ * Units are micro seconds.
+ */
+#define PLL_LOCK_TIME 20
+
+#ifndef __ASSEMBLER__
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
struct pll_data {
u32 phys_base;
void __iomem *base;
@@ -89,23 +106,19 @@
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
-struct davinci_clk {
- struct clk_lookup lk;
-};
+#define CLK(dev, con, ck) \
+ { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ } \
-#define CLK(dev, con, ck) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_clk_init(struct clk_lookup *clocks);
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv);
extern struct platform_device davinci_wdt_device;
#endif
+
+#endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index c2de94c..94f27cb 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -11,13 +11,13 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/etherdevice.h>
+#include <linux/davinci_emac.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/cputype.h>
-#include <mach/emac.h>
#include "clock.h"
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 97a90f3..bd59f31 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,6 +19,7 @@
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
+#include <mach/memory.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2
@@ -39,10 +40,6 @@
static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
static void __iomem *ddr2_reg_base;
-#define DDR2_SDRCR_OFFSET 0xc
-#define DDR2_SRPD_BIT BIT(23)
-#define DDR2_LPMODEN_BIT BIT(31)
-
static void davinci_save_ddr_power(int enter, bool pdown)
{
u32 val;
@@ -109,8 +106,6 @@
int ret;
struct cpuidle_device *device;
struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
- struct resource *ddr2_regs;
- resource_size_t len;
device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
@@ -119,28 +114,12 @@
return -ENOENT;
}
- ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!ddr2_regs) {
- dev_err(&pdev->dev, "cannot get DDR2 controller register base");
- return -ENODEV;
- }
-
- len = resource_size(ddr2_regs);
-
- ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
- if (!ddr2_regs)
- return -EBUSY;
-
- ddr2_reg_base = ioremap(ddr2_regs->start, len);
- if (!ddr2_reg_base) {
- ret = -ENOMEM;
- goto ioremap_fail;
- }
+ ddr2_reg_base = pdata->ddr2_ctlr_base;
ret = cpuidle_register_driver(&davinci_idle_driver);
if (ret) {
dev_err(&pdev->dev, "failed to register driver\n");
- goto driver_register_fail;
+ return ret;
}
/* Wait for interrupt state */
@@ -167,18 +146,11 @@
ret = cpuidle_register_device(device);
if (ret) {
dev_err(&pdev->dev, "failed to register device\n");
- goto device_register_fail;
+ cpuidle_unregister_driver(&davinci_idle_driver);
+ return ret;
}
return 0;
-
-device_register_fail:
- cpuidle_unregister_driver(&davinci_idle_driver);
-driver_register_fail:
- iounmap(ddr2_reg_base);
-ioremap_fail:
- release_mem_region(ddr2_regs->start, len);
- return ret;
}
static struct platform_driver davinci_cpuidle_driver = {
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index b22b5cf..122e61a 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -371,7 +371,7 @@
.parent = &pll0_sysclk7,
};
-static struct davinci_clk da830_clks[] = {
+static struct clk_lookup da830_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
CLK(NULL, "pll0_aux", &pll0_aux_clk),
@@ -1208,13 +1208,13 @@
void __init da830_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
return;
davinci_soc_info_da830.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da830);
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 717806c..d0fd756 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -26,6 +26,7 @@
#include <mach/time.h>
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
+#include <mach/pm.h>
#include "clock.h"
#include "mux.h"
@@ -40,6 +41,7 @@
#define DA850_REF_FREQ 24000000
#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
+#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5)
#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
static int da850_set_armrate(struct clk *clk, unsigned long rate);
@@ -333,7 +335,7 @@
.flags = ALWAYS_ENABLED,
};
-static struct davinci_clk da850_clks[] = {
+static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
CLK(NULL, "pll0_aux", &pll0_aux_clk),
@@ -535,6 +537,7 @@
MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false)
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
+ MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false)
#endif
};
@@ -770,6 +773,12 @@
.length = DA8XX_CP_INTC_SIZE,
.type = MT_DEVICE
},
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE
+ },
};
static void __iomem *da850_psc_bases[] = {
@@ -825,12 +834,12 @@
static void da850_set_async3_src(int pllnum)
{
struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
- struct davinci_clk *c;
+ struct clk_lookup *c;
unsigned int v;
int ret;
- for (c = da850_clks; c->lk.clk; c++) {
- clk = c->lk.clk;
+ for (c = da850_clks; c->clk; c++) {
+ clk = c->clk;
if (clk->flags & DA850_CLK_ASYNC3) {
ret = clk_set_parent(clk, newparent);
WARN(ret, "DA850: unable to re-parent clock %s",
@@ -838,12 +847,12 @@
}
}
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
if (pllnum)
v |= CFGCHIP3_ASYNC3_CLKSRC;
else
v &= ~CFGCHIP3_ASYNC3_CLKSRC;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
}
#ifdef CONFIG_CPU_FREQ
@@ -987,7 +996,6 @@
unsigned int prediv, mult, postdiv;
struct da850_opp *opp;
struct pll_data *pll = clk->pll_data;
- unsigned int v;
int ret;
opp = (struct da850_opp *) da850_freq_table[index].index;
@@ -995,11 +1003,6 @@
mult = opp->mult;
postdiv = opp->postdiv;
- /* Unlock writing to PLL registers */
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
- v &= ~CFGCHIP0_PLL_MASTER_LOCK;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
-
ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
if (WARN_ON(ret))
return ret;
@@ -1028,6 +1031,43 @@
}
#endif
+int da850_register_pm(struct platform_device *pdev)
+{
+ int ret;
+ struct davinci_pm_config *pdata = pdev->dev.platform_data;
+
+ ret = davinci_cfg_reg(DA850_RTC_ALARM);
+ if (ret)
+ return ret;
+
+ pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr();
+ pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG);
+ pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C;
+
+ pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+ if (!pdata->cpupll_reg_base)
+ return -ENOMEM;
+
+ pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K);
+ if (!pdata->ddrpll_reg_base) {
+ ret = -ENOMEM;
+ goto no_ddrpll_mem;
+ }
+
+ pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+ if (!pdata->ddrpsc_reg_base) {
+ ret = -ENOMEM;
+ goto no_ddrpsc_mem;
+ }
+
+ return platform_device_register(pdev);
+
+no_ddrpsc_mem:
+ iounmap(pdata->ddrpll_reg_base);
+no_ddrpll_mem:
+ iounmap(pdata->cpupll_reg_base);
+ return ret;
+}
static struct davinci_soc_info davinci_soc_info_da850 = {
.io_desc = da850_io_desc,
@@ -1049,17 +1089,25 @@
.gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
+ .sram_dma = DA8XX_ARM_RAM_BASE,
+ .sram_len = SZ_8K,
};
void __init da850_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ unsigned int v;
+
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
+ return;
+
+ da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
return;
davinci_soc_info_da850.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da850);
@@ -1071,4 +1119,14 @@
* be any noticible change even in non-DVFS use cases.
*/
da850_set_async3_src(1);
+
+ /* Unlock writing to PLL0 registers */
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
+ v &= ~CFGCHIP0_PLL_MASTER_LOCK;
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
+
+ /* Unlock writing to PLL1 registers */
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+ v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index a5105f0..0a96791 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,8 +24,10 @@
#include "clock.h"
#define DA8XX_TPCC_BASE 0x01c00000
+#define DA850_TPCC1_BASE 0x01e30000
#define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400
+#define DA850_TPTC2_BASE 0x01e38000
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
#define DA8XX_RTC_BASE 0x01C23000
@@ -42,7 +44,8 @@
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
-void __iomem *da8xx_syscfg_base;
+void __iomem *da8xx_syscfg0_base;
+void __iomem *da8xx_syscfg1_base;
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
@@ -82,11 +85,6 @@
},
};
-static const s8 da8xx_dma_chan_no_event[] = {
- 20, 21,
- -1
-};
-
static const s8 da8xx_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
@@ -101,20 +99,52 @@
{-1, -1}
};
-static struct edma_soc_info da8xx_edma_info[] = {
+static const s8 da850_queue_tc_mapping[][2] = {
+ /* {event queue no, TC no} */
+ {0, 0},
+ {-1, -1}
+};
+
+static const s8 da850_queue_priority_mapping[][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {-1, -1}
+};
+
+static struct edma_soc_info da830_edma_info[] = {
{
.n_channel = 32,
.n_region = 4,
.n_slot = 128,
.n_tc = 2,
.n_cc = 1,
- .noevent = da8xx_dma_chan_no_event,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
},
};
-static struct resource da8xx_edma_resources[] = {
+static struct edma_soc_info da850_edma_info[] = {
+ {
+ .n_channel = 32,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .n_cc = 1,
+ .queue_tc_mapping = da8xx_queue_tc_mapping,
+ .queue_priority_mapping = da8xx_queue_priority_mapping,
+ },
+ {
+ .n_channel = 32,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 1,
+ .n_cc = 1,
+ .queue_tc_mapping = da850_queue_tc_mapping,
+ .queue_priority_mapping = da850_queue_priority_mapping,
+ },
+};
+
+static struct resource da830_edma_resources[] = {
{
.name = "edma_cc0",
.start = DA8XX_TPCC_BASE,
@@ -145,19 +175,91 @@
},
};
-static struct platform_device da8xx_edma_device = {
+static struct resource da850_edma_resources[] = {
+ {
+ .name = "edma_cc0",
+ .start = DA8XX_TPCC_BASE,
+ .end = DA8XX_TPCC_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = DA8XX_TPTC0_BASE,
+ .end = DA8XX_TPTC0_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = DA8XX_TPTC1_BASE,
+ .end = DA8XX_TPTC1_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_cc1",
+ .start = DA850_TPCC1_BASE,
+ .end = DA850_TPCC1_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc2",
+ .start = DA850_TPTC2_BASE,
+ .end = DA850_TPTC2_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma0",
+ .start = IRQ_DA8XX_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "edma0_err",
+ .start = IRQ_DA8XX_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "edma1",
+ .start = IRQ_DA850_CCINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "edma1_err",
+ .start = IRQ_DA850_CCERRINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device da830_edma_device = {
.name = "edma",
.id = -1,
.dev = {
- .platform_data = da8xx_edma_info,
+ .platform_data = da830_edma_info,
},
- .num_resources = ARRAY_SIZE(da8xx_edma_resources),
- .resource = da8xx_edma_resources,
+ .num_resources = ARRAY_SIZE(da830_edma_resources),
+ .resource = da830_edma_resources,
+};
+
+static struct platform_device da850_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev = {
+ .platform_data = da850_edma_info,
+ },
+ .num_resources = ARRAY_SIZE(da850_edma_resources),
+ .resource = da850_edma_resources,
};
int __init da8xx_register_edma(void)
{
- return platform_device_register(&da8xx_edma_device);
+ struct platform_device *pdev;
+
+ if (cpu_is_davinci_da830())
+ pdev = &da830_edma_device;
+ else if (cpu_is_davinci_da850())
+ pdev = &da850_edma_device;
+ else
+ return -ENODEV;
+
+ return platform_device_register(pdev);
}
static struct resource da8xx_i2c_resources0[] = {
@@ -495,6 +597,19 @@
return ret;
}
+static void __iomem *da8xx_ddr2_ctlr_base;
+void __iomem * __init da8xx_get_mem_ctlr(void)
+{
+ if (da8xx_ddr2_ctlr_base)
+ return da8xx_ddr2_ctlr_base;
+
+ da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K);
+ if (!da8xx_ddr2_ctlr_base)
+ pr_warning("%s: Unable to map DDR2 controller", __func__);
+
+ return da8xx_ddr2_ctlr_base;
+}
+
static struct resource da8xx_cpuidle_resources[] = {
{
.start = DA8XX_DDR2_CTL_BASE,
@@ -520,6 +635,7 @@
int __init da8xx_register_cpuidle(void)
{
+ da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
+
return platform_device_register(&da8xx_cpuidle_device);
}
-
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index d84e854..3dc0a88 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -29,6 +29,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/spi.h>
#include "clock.h"
#include "mux.h"
@@ -334,7 +335,7 @@
.lpsc = DAVINCI_LPSC_USB,
};
-static struct davinci_clk dm355_clks[] = {
+static struct clk_lookup dm355_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
@@ -362,9 +363,9 @@
CLK("davinci-asp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
- CLK(NULL, "spi0", &spi0_clk),
- CLK(NULL, "spi1", &spi1_clk),
- CLK(NULL, "spi2", &spi2_clk),
+ CLK("spi_davinci.0", NULL, &spi0_clk),
+ CLK("spi_davinci.1", NULL, &spi1_clk),
+ CLK("spi_davinci.2", NULL, &spi2_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "pwm0", &pwm0_clk),
@@ -391,24 +392,40 @@
.flags = IORESOURCE_MEM,
},
{
- .start = IRQ_DM355_SPINT0_1,
+ .start = IRQ_DM355_SPINT0_0,
.flags = IORESOURCE_IRQ,
},
- /* Not yet used, so not included:
- * IORESOURCE_IRQ:
- * - IRQ_DM355_SPINT0_0
- * IORESOURCE_DMA:
- * - DAVINCI_DMA_SPI_SPIX
- * - DAVINCI_DMA_SPI_SPIR
- */
+ {
+ .start = 17,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = 16,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = EVENTQ_1,
+ .flags = IORESOURCE_DMA,
+ },
};
+static struct davinci_spi_platform_data dm355_spi0_pdata = {
+ .version = SPI_VERSION_1,
+ .num_chipselect = 2,
+ .clk_internal = 1,
+ .cs_hold = 1,
+ .intr_level = 0,
+ .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
+ .c2tdelay = 0,
+ .t2cdelay = 0,
+};
static struct platform_device dm355_spi0_device = {
.name = "spi_davinci",
.id = 0,
.dev = {
.dma_mask = &dm355_spi0_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dm355_spi0_pdata,
},
.num_resources = ARRAY_SIZE(dm355_spi0_resources),
.resource = dm355_spi0_resources,
@@ -563,13 +580,6 @@
/*----------------------------------------------------------------------*/
-static const s8 dma_chan_dm355_no_event[] = {
- 12, 13, 24, 56, 57,
- 58, 59, 60, 61, 62,
- 63,
- -1
-};
-
static const s8
queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
@@ -593,7 +603,6 @@
.n_slot = 128,
.n_tc = 2,
.n_cc = 1,
- .noevent = dma_chan_dm355_no_event,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
},
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index ce9da43..27772e1 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/spi/spi.h>
#include <asm/mach/map.h>
@@ -32,6 +33,8 @@
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
+#include <mach/spi.h>
+
#include "clock.h"
#include "mux.h"
@@ -403,7 +406,7 @@
.lpsc = DM365_LPSC_MJCP,
};
-static struct davinci_clk dm365_clks[] = {
+static struct clk_lookup dm365_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_aux", &pll1_aux_clk),
@@ -455,7 +458,7 @@
CLK(NULL, "timer3", &timer3_clk),
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("voice_codec", NULL, &voicecodec_clk),
+ CLK("davinci_voicecodec", NULL, &voicecodec_clk),
CLK("davinci-asp.0", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "mjcp", &mjcp_clk),
@@ -606,9 +609,78 @@
EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false)
EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false)
+EVT_CFG(DM365, EVT2_VC_TX, 0, 1, 1, false)
+EVT_CFG(DM365, EVT3_VC_RX, 1, 1, 1, false)
#endif
};
+static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct davinci_spi_platform_data dm365_spi0_pdata = {
+ .version = SPI_VERSION_1,
+ .num_chipselect = 2,
+ .clk_internal = 1,
+ .cs_hold = 1,
+ .intr_level = 0,
+ .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
+ .c2tdelay = 0,
+ .t2cdelay = 0,
+};
+
+static struct resource dm365_spi0_resources[] = {
+ {
+ .start = 0x01c66000,
+ .end = 0x01c667ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM365_SPIINT0_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = 17,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = 16,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = EVENTQ_3,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device dm365_spi0_device = {
+ .name = "spi_davinci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dm365_spi0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dm365_spi0_pdata,
+ },
+ .num_resources = ARRAY_SIZE(dm365_spi0_resources),
+ .resource = dm365_spi0_resources,
+};
+
+void __init dm365_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ davinci_cfg_reg(DM365_SPI0_SCLK);
+ davinci_cfg_reg(DM365_SPI0_SDI);
+ davinci_cfg_reg(DM365_SPI0_SDO);
+
+ /* not all slaves will be wired up */
+ if (chipselect_mask & BIT(0))
+ davinci_cfg_reg(DM365_SPI0_SDENA0);
+ if (chipselect_mask & BIT(1))
+ davinci_cfg_reg(DM365_SPI0_SDENA1);
+
+ spi_register_board_info(info, len);
+
+ platform_device_register(&dm365_spi0_device);
+}
+
static struct emac_platform_data dm365_emac_pdata = {
.ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -754,7 +826,7 @@
.n_cc = 1,
.queue_tc_mapping = dm365_queue_tc_mapping,
.queue_priority_mapping = dm365_queue_priority_mapping,
- .default_queue = EVENTQ_2,
+ .default_queue = EVENTQ_3,
},
};
@@ -835,6 +907,31 @@
.resource = dm365_asp_resources,
};
+static struct resource dm365_vc_resources[] = {
+ {
+ .start = DAVINCI_DM365_VC_BASE,
+ .end = DAVINCI_DM365_VC_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = DAVINCI_DMA_VC_TX,
+ .end = DAVINCI_DMA_VC_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = DAVINCI_DMA_VC_RX,
+ .end = DAVINCI_DMA_VC_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device dm365_vc_device = {
+ .name = "davinci_voicecodec",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm365_vc_resources),
+ .resource = dm365_vc_resources,
+};
+
static struct resource dm365_rtc_resources[] = {
{
.start = DM365_RTC_BASE,
@@ -991,6 +1088,14 @@
platform_device_register(&dm365_asp_device);
}
+void __init dm365_init_vc(struct snd_platform_data *pdata)
+{
+ davinci_cfg_reg(DM365_EVT2_VC_TX);
+ davinci_cfg_reg(DM365_EVT3_VC_RX);
+ dm365_vc_device.dev.platform_data = pdata;
+ platform_device_register(&dm365_vc_device);
+}
+
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
{
dm365_ks_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 92aeb56..2f2ae8b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -277,7 +277,7 @@
.usecount = 1, /* REVISIT: why cant' this be disabled? */
};
-struct davinci_clk dm644x_clks[] = {
+struct clk_lookup dm644x_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
@@ -479,15 +479,6 @@
/*----------------------------------------------------------------------*/
-static const s8 dma_chan_dm644x_no_event[] = {
- 0, 1, 12, 13, 14,
- 15, 25, 30, 31, 45,
- 46, 47, 55, 56, 57,
- 58, 59, 60, 61, 62,
- 63,
- -1
-};
-
static const s8
queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
@@ -511,7 +502,6 @@
.n_slot = 128,
.n_tc = 2,
.n_cc = 1,
- .noevent = dma_chan_dm644x_no_event,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
},
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 829a44b..893baf4 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -42,7 +42,6 @@
/*
* Device specific clocks
*/
-#define DM646X_REF_FREQ 27000000
#define DM646X_AUX_FREQ 24000000
static struct pll_data pll1_data = {
@@ -57,7 +56,6 @@
static struct clk ref_clk = {
.name = "ref_clk",
- .rate = DM646X_REF_FREQ,
};
static struct clk aux_clkin = {
@@ -313,7 +311,7 @@
.flags = ALWAYS_ENABLED,
};
-struct davinci_clk dm646x_clks[] = {
+struct clk_lookup dm646x_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "aux", &aux_clkin),
CLK(NULL, "pll1", &pll1_clk),
@@ -513,14 +511,6 @@
/*----------------------------------------------------------------------*/
-static const s8 dma_chan_dm646x_no_event[] = {
- 0, 1, 2, 3, 13,
- 14, 15, 24, 25, 26,
- 27, 30, 31, 54, 55,
- 56,
- -1
-};
-
/* Four Transfer Controllers on DM646x */
static const s8
dm646x_queue_tc_mapping[][2] = {
@@ -549,7 +539,6 @@
.n_slot = 512,
.n_tc = 4,
.n_cc = 1,
- .noevent = dma_chan_dm646x_no_event,
.queue_tc_mapping = dm646x_queue_tc_mapping,
.queue_priority_mapping = dm646x_queue_priority_mapping,
},
@@ -925,6 +914,7 @@
void __init dm646x_init(void)
{
+ dm646x_board_setup_refclk(&ref_clk);
davinci_common_init(&davinci_soc_info_dm646x);
}
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 648fbb7..15dd886 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -226,11 +226,11 @@
*/
DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
- /* The edma_noevent bit for each channel is clear unless
- * it doesn't trigger DMA events on this platform. It uses a
- * bit of SOC-specific initialization code.
+ /* The edma_unused bit for each channel is clear unless
+ * it is not being used on this platform. It uses a bit
+ * of SOC-specific initialization code.
*/
- DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+ DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
unsigned irq_res_start;
unsigned irq_res_end;
@@ -243,6 +243,7 @@
};
static struct edma *edma_info[EDMA_MAX_CC];
+static int arch_num_cc;
/* dummy param set used to (re)initialize parameter RAM slots */
static const struct edmacc_param dummy_paramset = {
@@ -555,8 +556,27 @@
return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
}
+static int prepare_unused_channel_list(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int i, ctlr;
+
+ for (i = 0; i < pdev->num_resources; i++) {
+ if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
+ (int)pdev->resource[i].start >= 0) {
+ ctlr = EDMA_CTLR(pdev->resource[i].start);
+ clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
+ edma_info[ctlr]->edma_unused);
+ }
+ }
+
+ return 0;
+}
+
/*-----------------------------------------------------------------------*/
+static bool unused_chan_list_done;
+
/* Resource alloc/free: dma channels, parameter RAM slots */
/**
@@ -594,7 +614,22 @@
void *data,
enum dma_event_q eventq_no)
{
- unsigned i, done, ctlr = 0;
+ unsigned i, done = 0, ctlr = 0;
+ int ret = 0;
+
+ if (!unused_chan_list_done) {
+ /*
+ * Scan all the platform devices to find out the EDMA channels
+ * used and clear them in the unused list, making the rest
+ * available for ARM usage.
+ */
+ ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
+ prepare_unused_channel_list);
+ if (ret < 0)
+ return ret;
+
+ unused_chan_list_done = true;
+ }
if (channel >= 0) {
ctlr = EDMA_CTLR(channel);
@@ -602,15 +637,15 @@
}
if (channel < 0) {
- for (i = 0; i < EDMA_MAX_CC; i++) {
+ for (i = 0; i < arch_num_cc; i++) {
channel = 0;
for (;;) {
channel = find_next_bit(edma_info[i]->
- edma_noevent,
+ edma_unused,
edma_info[i]->num_channels,
channel);
if (channel == edma_info[i]->num_channels)
- return -ENOMEM;
+ break;
if (!test_and_set_bit(channel,
edma_info[i]->edma_inuse)) {
done = 1;
@@ -622,6 +657,8 @@
if (done)
break;
}
+ if (!done)
+ return -ENOMEM;
} else if (channel >= edma_info[ctlr]->num_channels) {
return -EINVAL;
} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
@@ -642,7 +679,7 @@
map_dmach_queue(ctlr, channel, eventq_no);
- return channel;
+ return EDMA_CTLR_CHAN(ctlr, channel);
}
EXPORT_SYMBOL(edma_alloc_channel);
@@ -1219,7 +1256,7 @@
unsigned int mask = (1 << (channel & 0x1f));
/* EDMA channels without event association */
- if (test_bit(channel, edma_info[ctlr]->edma_noevent)) {
+ if (test_bit(channel, edma_info[ctlr]->edma_unused)) {
pr_debug("EDMA: ESR%d %08x\n", j,
edma_shadow0_read_array(ctlr, SH_ESR, j));
edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
@@ -1344,7 +1381,6 @@
const s8 (*queue_tc_mapping)[2];
int i, j, found = 0;
int status = -1;
- const s8 *noevent;
int irq[EDMA_MAX_CC] = {0, 0};
int err_irq[EDMA_MAX_CC] = {0, 0};
struct resource *r[EDMA_MAX_CC] = {NULL};
@@ -1407,11 +1443,9 @@
memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
&dummy_paramset, PARM_SIZE);
- noevent = info[j].noevent;
- if (noevent) {
- while (*noevent != -1)
- set_bit(*noevent++, edma_info[j]->edma_noevent);
- }
+ /* Mark all channels as unused */
+ memset(edma_info[j]->edma_unused, 0xff,
+ sizeof(edma_info[j]->edma_unused));
sprintf(irq_name, "edma%d", j);
irq[j] = platform_get_irq_byname(pdev, irq_name);
@@ -1467,6 +1501,7 @@
edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
edma_write_array(j, EDMA_QRAE, i, 0x0);
}
+ arch_num_cc++;
}
if (tc_errs_handled) {
diff --git a/arch/arm/mach-davinci/include/mach/cdce949.h b/arch/arm/mach-davinci/include/mach/cdce949.h
new file mode 100644
index 0000000..c73331fa
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cdce949.h
@@ -0,0 +1,19 @@
+/*
+ * TI CDCE949 off-chip clock synthesizer support
+ *
+ * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_CDCE949_H
+#define _MACH_DAVINCI_CDCE949_H
+
+#include <linux/clk.h>
+
+#include <mach/clock.h>
+
+int cdce_set_rate(struct clk *clk, unsigned long rate);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 6ca2c9a..50a955f 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -43,7 +43,7 @@
void __iomem *jtag_id_base;
struct davinci_id *ids;
unsigned long ids_num;
- struct davinci_clk *cpu_clks;
+ struct clk_lookup *cpu_clks;
void __iomem **psc_bases;
unsigned long psc_bases_num;
void __iomem *pinmux_base;
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h
index cbfc6a9..74f088b 100644
--- a/arch/arm/mach-davinci/include/mach/cpuidle.h
+++ b/arch/arm/mach-davinci/include/mach/cpuidle.h
@@ -12,6 +12,7 @@
struct davinci_cpuidle_config {
u32 ddr2_pdown;
+ void __iomem *ddr2_ctlr_base;
};
#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 9070491..cc9be7f 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -13,15 +13,17 @@
#include <video/da8xx-fb.h>
+#include <linux/davinci_emac.h>
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
-#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/mmc.h>
#include <mach/usb.h>
+#include <mach/pm.h>
-extern void __iomem *da8xx_syscfg_base;
+extern void __iomem *da8xx_syscfg0_base;
+extern void __iomem *da8xx_syscfg1_base;
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
@@ -34,13 +36,17 @@
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
+#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
+#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
+#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
+#define DA8XX_DEEPSLEEP_REG 0x8
+
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_TIMER64P0_BASE 0x01c20000
@@ -48,11 +54,13 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA8XX_PLL1_BASE 0x01e1a000
#define DA8XX_MMCSD0_BASE 0x01c40000
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
#define DA8XX_DDR2_CTL_BASE 0xb0000000
+#define DA8XX_ARM_RAM_BASE 0xffff0000
#define PINMUX0 0x00
#define PINMUX1 0x04
@@ -90,6 +98,8 @@
int da8xx_register_rtc(void);
int da850_register_cpufreq(void);
int da8xx_register_cpuidle(void);
+void __iomem * __init da8xx_get_mem_ctlr(void);
+int da850_register_pm(struct platform_device *pdev);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 17ab523..3cd93a8 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#include <linux/serial_reg.h>
#define UART_SHIFT 2
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x01000000 @ physical base address
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index 9fc5a64..3a37b5a 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -14,8 +14,8 @@
#define __ASM_ARCH_DM665_H
#include <linux/platform_device.h>
+#include <linux/davinci_emac.h>
#include <mach/hardware.h>
-#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <media/davinci/vpfe_capture.h>
@@ -32,10 +32,17 @@
#define DM365_RTC_BASE (0x01C69000)
+#define DAVINCI_DM365_VC_BASE (0x01D0C000)
+#define DAVINCI_DMA_VC_TX 2
+#define DAVINCI_DMA_VC_RX 3
+
void __init dm365_init(void);
void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_vc(struct snd_platform_data *pdata);
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
+void dm365_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
void dm365_set_vpfe_config(struct vpfe_config *cfg);
#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 44e8f0f..1a8b09c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,8 +22,8 @@
#ifndef __ASM_ARCH_DM644X_H
#define __ASM_ARCH_DM644X_H
+#include <linux/davinci_emac.h>
#include <mach/hardware.h>
-#include <mach/emac.h>
#include <mach/asp.h>
#include <media/davinci/vpfe_capture.h>
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 8cec746..846da98 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -12,10 +12,11 @@
#define __ASM_ARCH_DM646X_H
#include <mach/hardware.h>
-#include <mach/emac.h>
#include <mach/asp.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/davinci_emac.h>
#define DM646X_EMAC_BASE (0x01C80000)
#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
@@ -30,6 +31,7 @@
void __init dm646x_init_ide(void);
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
+void __init dm646x_board_setup_refclk(struct clk *clk);
void dm646x_video_init(void);
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index eb8bfd7..ced3092 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -280,8 +280,6 @@
unsigned n_cc;
enum dma_event_q default_queue;
- /* list of channels with no even trigger; terminated by "-1" */
- const s8 *noevent;
const s8 (*queue_tc_mapping)[2];
const s8 (*queue_priority_mapping)[2];
};
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 41c8938..c45ba1f 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -27,7 +27,7 @@
/*
* I/O mapping
*/
-#define IO_PHYS 0x01c00000
+#define IO_PHYS 0x01c00000UL
#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
#define IO_SIZE 0x00400000
#define IO_VIRT (IO_PHYS + IO_OFFSET)
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index c248e9b..39fdcea 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -16,6 +16,8 @@
struct davinci_i2c_platform_data {
unsigned int bus_freq; /* standard bus frequency (kHz) */
unsigned int bus_delay; /* post-transaction delay (usec) */
+ unsigned int sda_pin; /* GPIO pin ID to use for SDA */
+ unsigned int scl_pin; /* GPIO pin ID to use for SCL */
};
/* for board setup code */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 80309ae..a91edfb 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -31,6 +31,11 @@
#define PHYS_OFFSET DAVINCI_DDR_BASE
#endif
+#define DDR2_SDRCR_OFFSET 0xc
+#define DDR2_SRPD_BIT BIT(23)
+#define DDR2_MCLKSTOPEN_BIT BIT(30)
+#define DDR2_LPMODEN_BIT BIT(31)
+
/*
* Increase size of DMA-consistent memory region
*/
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index b60c693..2a68c1d 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -327,6 +327,8 @@
/* EDMA event muxing */
DM365_EVT2_ASP_TX,
DM365_EVT3_ASP_RX,
+ DM365_EVT2_VC_TX,
+ DM365_EVT3_VC_RX,
DM365_EVT26_MMC0_RX,
};
@@ -899,6 +901,7 @@
DA850_GPIO2_15,
DA850_GPIO4_0,
DA850_GPIO4_1,
+ DA850_RTC_ALARM,
};
#ifdef CONFIG_DAVINCI_MUX
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h
new file mode 100644
index 0000000..37b19bf3
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * TI DaVinci platform support for power management.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MACH_DAVINCI_PM_H
+#define _MACH_DAVINCI_PM_H
+
+/*
+ * Caution: Assembly code in sleep.S makes assumtion on the order
+ * of the members of this structure.
+ */
+struct davinci_pm_config {
+ void __iomem *ddr2_ctlr_base;
+ void __iomem *ddrpsc_reg_base;
+ int ddrpsc_num;
+ void __iomem *ddrpll_reg_base;
+ void __iomem *deepsleep_reg;
+ void __iomem *cpupll_reg_base;
+ /*
+ * Note on SLEEPCOUNT:
+ * The SLEEPCOUNT feature is mainly intended for cases in which
+ * the internal oscillator is used. The internal oscillator is
+ * fully disabled in deep sleep mode. When you exist deep sleep
+ * mode, the oscillator will be turned on and will generate very
+ * small oscillations which will not be detected by the deep sleep
+ * counter. Eventually those oscillations will grow to an amplitude
+ * large enough to start incrementing the deep sleep counter.
+ * In this case recommendation from hardware engineers is that the
+ * SLEEPCOUNT be set to 4096. This means that 4096 valid clock cycles
+ * must be detected before the clock is passed to the rest of the
+ * system.
+ * In the case that the internal oscillator is not used and the
+ * clock is generated externally, the SLEEPCOUNT value can be very
+ * small since the clock input is assumed to be stable before SoC
+ * is taken out of deepsleep mode. A value of 128 would be more than
+ * adequate.
+ */
+ int sleepcount;
+};
+
+extern unsigned int davinci_cpu_suspend_sz;
+extern void davinci_cpu_suspend(struct davinci_pm_config *);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 171173c..651f6d8 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -180,8 +180,23 @@
#define DA8XX_LPSC1_CR_P3_SS 26
#define DA8XX_LPSC1_L3_CBA_RAM 31
+/* PSC register offsets */
+#define EPCPR 0x070
+#define PTCMD 0x120
+#define PTSTAT 0x128
+#define PDSTAT 0x200
+#define PDCTL1 0x304
+#define MDSTAT 0x800
+#define MDCTL 0xA00
+
+#define MDSTAT_STATE_MASK 0x1f
+
+#ifndef __ASSEMBLER__
+
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, char enable);
+#endif
+
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
new file mode 100644
index 0000000..910efbf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_SPI_H
+#define __ARCH_ARM_DAVINCI_SPI_H
+
+enum {
+ SPI_VERSION_1, /* For DM355/DM365/DM6467 */
+ SPI_VERSION_2, /* For DA8xx */
+};
+
+struct davinci_spi_platform_data {
+ u8 version;
+ u8 num_chipselect;
+ u8 wdelay;
+ u8 odd_parity;
+ u8 parity_enable;
+ u8 wait_enable;
+ u8 timer_disable;
+ u8 clk_internal;
+ u8 cs_hold;
+ u8 intr_level;
+ u8 poll_mode;
+ u8 use_dma;
+ u8 c2tdelay;
+ u8 t2cdelay;
+};
+
+#endif /* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
index 5282756..9b88529 100644
--- a/arch/arm/mach-davinci/include/mach/timex.h
+++ b/arch/arm/mach-davinci/include/mach/timex.h
@@ -11,7 +11,12 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
-/* The source frequency for the timers is the 27MHz clock */
+/*
+ * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
+ * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
+ * linux/jiffies.h) are not used directly in code. Currently none of the
+ * code relevant to DaVinci platform depends on these values directly.
+ */
#define CLOCK_TICK_RATE 27000000
#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 49912b4..a1c0b6b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -24,7 +24,7 @@
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
- return __arm_ioremap(p, size, type);
+ return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
}
EXPORT_SYMBOL(davinci_ioremap);
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
new file mode 100644
index 0000000..fab953b
--- /dev/null
+++ b/arch/arm/mach-davinci/pm.c
@@ -0,0 +1,158 @@
+/*
+ * DaVinci Power Management Routines
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include <asm/cacheflush.h>
+#include <asm/delay.h>
+
+#include <mach/da8xx.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
+
+#include "clock.h"
+
+#define DEEPSLEEP_SLEEPCOUNT_MASK 0xFFFF
+
+static void (*davinci_sram_suspend) (struct davinci_pm_config *);
+static struct davinci_pm_config *pdata;
+
+static void davinci_sram_push(void *dest, void *src, unsigned int size)
+{
+ memcpy(dest, src, size);
+ flush_icache_range((unsigned long)dest, (unsigned long)(dest + size));
+}
+
+static void davinci_pm_suspend(void)
+{
+ unsigned val;
+
+ if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+
+ /* Switch CPU PLL to bypass mode */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+ udelay(PLL_BYPASS_TIME);
+
+ /* Powerdown CPU PLL */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val |= PLLCTL_PLLPWRDN;
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+ }
+
+ /* Configure sleep count in deep sleep register */
+ val = __raw_readl(pdata->deepsleep_reg);
+ val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+ val |= pdata->sleepcount;
+ __raw_writel(val, pdata->deepsleep_reg);
+
+ /* System goes to sleep in this call */
+ davinci_sram_suspend(pdata);
+
+ if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+
+ /* put CPU PLL in reset */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val &= ~PLLCTL_PLLRST;
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+ /* put CPU PLL in power down */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val &= ~PLLCTL_PLLPWRDN;
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+ /* wait for CPU PLL reset */
+ udelay(PLL_RESET_TIME);
+
+ /* bring CPU PLL out of reset */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val |= PLLCTL_PLLRST;
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+ /* Wait for CPU PLL to lock */
+ udelay(PLL_LOCK_TIME);
+
+ /* Remove CPU PLL from bypass mode */
+ val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+ val &= ~PLLCTL_PLLENSRC;
+ val |= PLLCTL_PLLEN;
+ __raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+ }
+}
+
+static int davinci_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ davinci_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct platform_suspend_ops davinci_pm_ops = {
+ .enter = davinci_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init davinci_pm_probe(struct platform_device *pdev)
+{
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "cannot get platform data\n");
+ return -ENOENT;
+ }
+
+ davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
+ if (!davinci_sram_suspend) {
+ dev_err(&pdev->dev, "cannot allocate SRAM memory\n");
+ return -ENOMEM;
+ }
+
+ davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
+ davinci_cpu_suspend_sz);
+
+ suspend_set_ops(&davinci_pm_ops);
+
+ return 0;
+}
+
+static int __exit davinci_pm_remove(struct platform_device *pdev)
+{
+ sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz);
+ return 0;
+}
+
+static struct platform_driver davinci_pm_driver = {
+ .driver = {
+ .name = "pm-davinci",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(davinci_pm_remove),
+};
+
+static int __init davinci_pm_init(void)
+{
+ return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
+}
+late_initcall(davinci_pm_init);
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 04a3cb7..adf6b5c 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,17 +25,6 @@
#include <mach/cputype.h>
#include <mach/psc.h>
-/* PSC register offsets */
-#define EPCPR 0x070
-#define PTCMD 0x120
-#define PTSTAT 0x128
-#define PDSTAT 0x200
-#define PDCTL1 0x304
-#define MDSTAT 0x800
-#define MDCTL 0xA00
-
-#define MDSTAT_STATE_MASK 0x1f
-
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
new file mode 100644
index 0000000..fb5e72b
--- /dev/null
+++ b/arch/arm/mach-davinci/sleep.S
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* replicated define because linux/bitops.h cannot be included in assembly */
+#define BIT(nr) (1 << (nr))
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/psc.h>
+#include <mach/memory.h>
+
+#include "clock.h"
+
+/* Arbitrary, hardware currently does not update PHYRDY correctly */
+#define PHYRDY_CYCLES 0x1000
+
+/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */
+#define PLL_BYPASS_CYCLES (PLL_BYPASS_TIME * 25)
+#define PLL_RESET_CYCLES (PLL_RESET_TIME * 25)
+#define PLL_LOCK_CYCLES (PLL_LOCK_TIME * 25)
+
+#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
+
+ .text
+/*
+ * Move DaVinci into deep sleep state
+ *
+ * Note: This code is copied to internal SRAM by PM code. When the DaVinci
+ * wakes up it continues execution at the point it went to sleep.
+ * Register Usage:
+ * r0: contains virtual base for DDR2 controller
+ * r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
+ * r2: contains PSC number for DDR2
+ * r3: contains virtual base DDR2 PLL controller
+ * r4: contains virtual address of the DEEPSLEEP register
+ */
+ENTRY(davinci_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+
+ ldr ip, CACHE_FLUSH
+ blx ip
+
+ ldmia r0, {r0-r4}
+
+ /*
+ * Switch DDR to self-refresh mode.
+ */
+
+ /* calculate SDRCR address */
+ ldr ip, [r0, #DDR2_SDRCR_OFFSET]
+ bic ip, ip, #DDR2_SRPD_BIT
+ orr ip, ip, #DDR2_LPMODEN_BIT
+ str ip, [r0, #DDR2_SDRCR_OFFSET]
+
+ ldr ip, [r0, #DDR2_SDRCR_OFFSET]
+ orr ip, ip, #DDR2_MCLKSTOPEN_BIT
+ str ip, [r0, #DDR2_SDRCR_OFFSET]
+
+ mov ip, #PHYRDY_CYCLES
+1: subs ip, ip, #0x1
+ bne 1b
+
+ /* Disable DDR2 LPSC */
+ mov r7, r0
+ mov r0, #0x2
+ bl davinci_ddr_psc_config
+ mov r0, r7
+
+ /* Disable clock to DDR PHY */
+ ldr ip, [r3, #PLLDIV1]
+ bic ip, ip, #PLLDIV_EN
+ str ip, [r3, #PLLDIV1]
+
+ /* Put the DDR PLL in bypass and power down */
+ ldr ip, [r3, #PLLCTL]
+ bic ip, ip, #PLLCTL_PLLENSRC
+ bic ip, ip, #PLLCTL_PLLEN
+ str ip, [r3, #PLLCTL]
+
+ /* Wait for PLL to switch to bypass */
+ mov ip, #PLL_BYPASS_CYCLES
+2: subs ip, ip, #0x1
+ bne 2b
+
+ /* Power down the PLL */
+ ldr ip, [r3, #PLLCTL]
+ orr ip, ip, #PLLCTL_PLLPWRDN
+ str ip, [r3, #PLLCTL]
+
+ /* Go to deep sleep */
+ ldr ip, [r4]
+ orr ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
+ /* System goes to sleep beyond after this instruction */
+ str ip, [r4]
+
+ /* Wake up from sleep */
+
+ /* Clear sleep enable */
+ ldr ip, [r4]
+ bic ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
+ str ip, [r4]
+
+ /* initialize the DDR PLL controller */
+
+ /* Put PLL in reset */
+ ldr ip, [r3, #PLLCTL]
+ bic ip, ip, #PLLCTL_PLLRST
+ str ip, [r3, #PLLCTL]
+
+ /* Clear PLL power down */
+ ldr ip, [r3, #PLLCTL]
+ bic ip, ip, #PLLCTL_PLLPWRDN
+ str ip, [r3, #PLLCTL]
+
+ mov ip, #PLL_RESET_CYCLES
+3: subs ip, ip, #0x1
+ bne 3b
+
+ /* Bring PLL out of reset */
+ ldr ip, [r3, #PLLCTL]
+ orr ip, ip, #PLLCTL_PLLRST
+ str ip, [r3, #PLLCTL]
+
+ /* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */
+ mov ip, #PLL_LOCK_CYCLES
+4: subs ip, ip, #0x1
+ bne 4b
+
+ /* Remove PLL from bypass mode */
+ ldr ip, [r3, #PLLCTL]
+ bic ip, ip, #PLLCTL_PLLENSRC
+ orr ip, ip, #PLLCTL_PLLEN
+ str ip, [r3, #PLLCTL]
+
+ /* Start 2x clock to DDR2 */
+
+ ldr ip, [r3, #PLLDIV1]
+ orr ip, ip, #PLLDIV_EN
+ str ip, [r3, #PLLDIV1]
+
+ /* Enable VCLK */
+
+ /* Enable DDR2 LPSC */
+ mov r7, r0
+ mov r0, #0x3
+ bl davinci_ddr_psc_config
+ mov r0, r7
+
+ /* clear MCLKSTOPEN */
+
+ ldr ip, [r0, #DDR2_SDRCR_OFFSET]
+ bic ip, ip, #DDR2_MCLKSTOPEN_BIT
+ str ip, [r0, #DDR2_SDRCR_OFFSET]
+
+ ldr ip, [r0, #DDR2_SDRCR_OFFSET]
+ bic ip, ip, #DDR2_LPMODEN_BIT
+ str ip, [r0, #DDR2_SDRCR_OFFSET]
+
+ /* Restore registers and return */
+ ldmfd sp!, {r0-r12, pc}
+
+ENDPROC(davinci_cpu_suspend)
+
+/*
+ * Disables or Enables DDR2 LPSC
+ * Register Usage:
+ * r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC
+ * r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
+ * r2: contains PSC number for DDR2
+ */
+ENTRY(davinci_ddr_psc_config)
+ /* Set next state in mdctl for DDR2 */
+ mov r6, #MDCTL
+ add r6, r6, r2, lsl #2
+ ldr ip, [r1, r6]
+ bic ip, ip, #MDSTAT_STATE_MASK
+ orr ip, ip, r0
+ str ip, [r1, r6]
+
+ /* Enable the Power Domain Transition Command */
+ ldr ip, [r1, #PTCMD]
+ orr ip, ip, #0x1
+ str ip, [r1, #PTCMD]
+
+ /* Check for Transition Complete (PTSTAT) */
+ptstat_done:
+ ldr ip, [r1, #PTSTAT]
+ and ip, ip, #0x1
+ cmp ip, #0x0
+ bne ptstat_done
+
+ /* Check for DDR2 clock disable completion; */
+ mov r6, #MDSTAT
+ add r6, r6, r2, lsl #2
+ddr2clk_stop_done:
+ ldr ip, [r1, r6]
+ and ip, ip, #MDSTAT_STATE_MASK
+ cmp ip, r0
+ bne ddr2clk_stop_done
+
+ mov pc, lr
+ENDPROC(davinci_ddr_psc_config)
+
+CACHE_FLUSH:
+ .word arm926_flush_kern_cache_all
+
+ENTRY(davinci_cpu_suspend_sz)
+ .word . - davinci_cpu_suspend
+ENDPROC(davinci_cpu_suspend_sz)
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 9b89ec7..1521d13 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
index 8b2c974..a28792c 100644
--- a/arch/arm/mach-dove/include/mach/vmalloc.h
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-dove/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfd800000
+#define VMALLOC_END 0xfd800000UL
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 1dde822..ebbd89f 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
**/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mov \rx, #0xf0000000
orr \rx, \rx, #0x00000be0
.endm
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 9167c3d..3a08b18 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -161,6 +161,20 @@
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
+config MACH_SIM_ONE
+ bool "Support Simplemachines Sim.One board"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+ bool "Support Bluewater Systems Snapper CL15 Module"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the Bluewater
+ Systems Snapper CL15 Module.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index eae6199..33ee2c8 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -10,4 +10,6 @@
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
+obj-$(CONFIG_MACH_SIM_ONE) += simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 1d0f9d8..5f80092 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -10,6 +10,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -445,37 +447,39 @@
static int __init ep93xx_clock_init(void)
{
u32 value;
- int i;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
- if (!(value & 0x00800000)) { /* PLL1 bypassed? */
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
- } else {
+ else
clk_pll1.rate = calc_pll_rate(value);
- }
+
+ /* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
- if (!(value & 0x00080000)) { /* PLL2 bypassed? */
+ /* Determine the bootloader configured pll2 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
- } else if (value & 0x00040000) { /* PLL2 enabled? */
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
- } else {
+ else
clk_pll2.rate = 0;
- }
+
+ /* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
- printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+ pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
- printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+ pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
- for (i = 0; i < ARRAY_SIZE(clocks); i++)
- clkdev_add(&clocks[i]);
+ clkdev_add_table(clocks, ARRAY_SIZE(clocks));
return 0;
}
arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1f0d665..90fb591 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -14,12 +14,15 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/timex.h>
+#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@@ -35,7 +38,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@@ -82,13 +84,40 @@
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
-static unsigned int last_jiffy_time;
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+#define EP93XX_TIMER123_CLOCK 508469
+#define EP93XX_TIMER4_CLOCK 983040
+
+#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+static unsigned int last_jiffy_time;
+
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
+ /* Writing any value clears the timer interrupt */
__raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+ /* Recover lost jiffies */
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
>= TIMER4_TICKS_PER_JIFFY) {
@@ -107,13 +136,18 @@
static void __init ep93xx_timer_init(void)
{
+ u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+ EP93XX_TIMER123_CONTROL_CLKSEL;
+
/* Enable periodic HZ timer. */
- __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
- __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
- __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+ __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+ __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+ __raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+ EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
- __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+ __raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+ EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
@@ -135,237 +169,16 @@
/*************************************************************************
- * GPIO handling for EP93xx
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-
-void ep93xx_gpio_update_int_params(unsigned port)
-{
- BUG_ON(port > 2);
-
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
- __raw_writeb(gpio_int_type2[port],
- EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
- __raw_writeb(gpio_int_type1[port],
- EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
- EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (enable)
- gpio_int_debounce[port] |= port_mask;
- else
- gpio_int_debounce[port] &= ~port_mask;
-
- __raw_writeb(gpio_int_debounce[port],
- EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
-
-/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned char status;
- int i;
-
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- /*
- * map discontiguous hw irq range to continous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
- */
- int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
- generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(port);
- }
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
- gpio_int_unmasked[port] &= ~port_mask;
- ep93xx_gpio_update_int_params(port);
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
- ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(unsigned int irq)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] |= 1 << (line & 7);
- ep93xx_gpio_update_int_params(port);
-}
-
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- struct irq_desc *desc = irq_desc + irq;
- const int gpio = irq_to_gpio(irq);
- const int port = gpio >> 3;
- const int port_mask = 1 << (gpio & 7);
-
- gpio_direction_input(gpio);
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_edge_irq;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] |= port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] &= ~port_mask;
- desc->handle_irq = handle_level_irq;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_int_type1[port] |= port_mask;
- /* set initial polarity based on current input level */
- if (gpio_get_value(gpio))
- gpio_int_type2[port] &= ~port_mask; /* falling */
- else
- gpio_int_type2[port] |= port_mask; /* rising */
- desc->handle_irq = handle_edge_irq;
- break;
- default:
- pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
- type, gpio);
- return -EINVAL;
- }
-
- gpio_int_enabled[port] |= port_mask;
-
- desc->status &= ~IRQ_TYPE_SENSE_MASK;
- desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
- ep93xx_gpio_update_int_params(port);
-
- return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
- .name = "GPIO",
- .ack = ep93xx_gpio_irq_ack,
- .mask_ack = ep93xx_gpio_irq_mask_ack,
- .mask = ep93xx_gpio_irq_mask,
- .unmask = ep93xx_gpio_irq_unmask,
- .set_type = ep93xx_gpio_irq_type,
-};
-
+extern void ep93xx_gpio_init_irq(void);
void __init ep93xx_init_irq(void)
{
- int gpio_irq;
-
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
- for (gpio_irq = gpio_to_irq(0);
- gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
- set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(gpio_irq, handle_level_irq);
- set_irq_flags(gpio_irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
- set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+ ep93xx_gpio_init_irq();
}
@@ -572,9 +385,9 @@
* CMOS driver.
*/
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
- pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ pr_warning("sda != EEDAT, open drain has no effect\n");
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
- pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+ pr_warning("scl != EECLK, open drain has no effect\n");
__raw_writel((data->sda_is_open_drain << 1) |
(data->scl_is_open_drain << 0),
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index dbcac9c4..8904ca4 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -28,6 +28,8 @@
* with this implementation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -173,7 +175,7 @@
switch (m2p_channel_state(ch)) {
case STATE_IDLE:
- pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ pr_crit("dma interrupt without a dma buffer\n");
BUG();
break;
@@ -197,7 +199,7 @@
break;
case STATE_NEXT:
- pr_crit("m2p_irq: dma interrupt while next\n");
+ pr_crit("dma interrupt while next\n");
BUG();
break;
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index a4a7be3..d22d67a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -118,12 +118,33 @@
}
}
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+ if (machine_is_edb9301() ||
+ machine_is_edb9302() || machine_is_edb9302a()) {
+ /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+ ep93xx_register_pwm(0, 1);
+ } else if (machine_is_edb9307() || machine_is_edb9307a()) {
+ /* EP9307 only has pwm.0 (PWMOUT) */
+ ep93xx_register_pwm(1, 0);
+ } else {
+ /* EP9312 and EP9315 have both */
+ ep93xx_register_pwm(1, 1);
+ }
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_pwm();
}
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 1ea8871..cc377ae 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -13,6 +13,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/seq_file.h>
@@ -22,6 +24,235 @@
#include <mach/hardware.h>
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debounce[3];
+
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
+
+void ep93xx_gpio_update_int_params(unsigned port)
+{
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+void ep93xx_gpio_int_mask(unsigned line)
+{
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+}
+
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if (enable)
+ gpio_int_debounce[port] |= port_mask;
+ else
+ gpio_int_debounce[port] &= ~port_mask;
+
+ __raw_writeb(gpio_int_debounce[port],
+ EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned char status;
+ int i;
+
+ status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+
+ status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ generic_handle_irq(gpio_irq);
+ }
+ }
+}
+
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
+
+ generic_handle_irq(gpio_irq);
+}
+
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ ep93xx_gpio_update_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
+ ep93xx_gpio_update_int_params(port);
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ ep93xx_gpio_update_int_params(port);
+}
+
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ ep93xx_gpio_update_int_params(port);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ gpio_direction_input(gpio);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
+ return -EINVAL;
+ }
+
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ ep93xx_gpio_update_int_params(port);
+
+ return 0;
+}
+
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
+};
+
+void __init ep93xx_gpio_init_irq(void)
+{
+ int gpio_irq;
+
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+}
+
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
struct ep93xx_gpio_chip {
struct gpio_chip chip;
@@ -31,10 +262,6 @@
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-/* From core.c */
-extern void ep93xx_gpio_int_mask(unsigned line);
-extern void ep93xx_gpio_update_int_params(unsigned port);
-
static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 802858b..5cd2244 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index d55194a..93e2ecc 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -92,21 +92,6 @@
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
@@ -167,8 +152,11 @@
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
+#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
index 62d1742..1e2f4e9 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
@@ -5,6 +5,8 @@
#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
#define __ASM_ARCH_EP93XX_KEYPAD_H
+struct matrix_keymap_data;
+
/* flags for the ep93xx_keypad driver */
#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
@@ -15,15 +17,13 @@
/**
* struct ep93xx_keypad_platform_data - platform specific device structure
- * @matrix_key_map: array of keycodes defining the keypad matrix
- * @matrix_key_map_size: ARRAY_SIZE(matrix_key_map)
- * @debounce: debounce start count; terminal count is 0xff
- * @prescale: row/column counter pre-scaler load value
- * @flags: see above
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @debounce: debounce start count; terminal count is 0xff
+ * @prescale: row/column counter pre-scaler load value
+ * @flags: see above
*/
struct ep93xx_keypad_platform_data {
- unsigned int *matrix_key_map;
- int matrix_key_map_size;
+ struct matrix_keymap_data *keymap_data;
unsigned int debounce;
unsigned int prescale;
unsigned int flags;
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
index aed21cd..1b3f25d 100644
--- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-ep93xx/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe800000
+#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
new file mode 100644
index 0000000..cd93990
--- /dev/null
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the 2.6.24.7 support:
+ * Copyright (C) 2009 Simplemachines
+ * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data simone_flash_data = {
+ .width = 2,
+};
+
+static struct resource simone_flash_resource = {
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device simone_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &simone_flash_resource,
+ .dev = {
+ .platform_data = &simone_flash_data,
+ },
+};
+
+static struct ep93xx_eth_data simone_eth_data = {
+ .phy_id = 1,
+};
+
+static struct ep93xxfb_mach_info simone_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init simone_init_machine(void)
+{
+ ep93xx_init_devices();
+
+ platform_device_register(&simone_flash);
+ ep93xx_register_eth(&simone_eth_data, 1);
+ ep93xx_register_fb(&simone_fb_info);
+ ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+ ARRAY_SIZE(simone_i2c_board_info));
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = simone_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 0000000..51134b0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ * Andre Renaud <andre@bluewatersys.com>
+ * James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE (1 << 9) /* Address latch */
+#define SNAPPERCL15_NAND_CLE (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) (chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ static u16 nand_state = SNAPPERCL15_NAND_WPN;
+ u16 set;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+ if (ctrl & NAND_NCE)
+ set &= ~SNAPPERCL15_NAND_CEN;
+ if (ctrl & NAND_CLE)
+ set |= SNAPPERCL15_NAND_CLE;
+ if (ctrl & NAND_ALE)
+ set |= SNAPPERCL15_NAND_ALE;
+
+ nand_state &= ~(SNAPPERCL15_NAND_CEN |
+ SNAPPERCL15_NAND_CLE |
+ SNAPPERCL15_NAND_ALE);
+ nand_state |= set;
+ __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+ {
+ .name = "Kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .part_probe_types = snappercl15_nand_part_probes,
+ .partitions = snappercl15_nand_parts,
+ .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts),
+ .options = NAND_NO_AUTOINCR,
+ .chip_delay = 25,
+ },
+ .ctrl = {
+ .dev_ready = snappercl15_nand_dev_ready,
+ .cmd_ctrl = snappercl15_nand_cmd_ctrl,
+ },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+ {
+ .start = SNAPPERCL15_NAND_BASE,
+ .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device snappercl15_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev.platform_data = &snappercl15_nand_data,
+ .resource = snappercl15_nand_resource,
+ .num_resources = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data snappercl15_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0,
+ .timeout = 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static struct ep93xxfb_mach_info snappercl15_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_eth(&snappercl15_eth_data, 1);
+ ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+ ARRAY_SIZE(snappercl15_i2c_data));
+ ep93xx_register_fb(&snappercl15_fb_info);
+ platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+ /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = snappercl15_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 41febc7..e3bc3f6 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -32,12 +32,13 @@
EXPORT_SYMBOL(mem_fclk_21285);
-static void __init early_fclk(char **arg)
+static int __init early_fclk(char *arg)
{
- mem_fclk_21285 = simple_strtoul(*arg, arg, 0);
+ mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
+ return 0;
}
-__early_param("mem_fclk_21285=", early_fclk);
+early_param("mem_fclk_21285", early_fclk);
static int __init parse_tag_memclk(const struct tag *tag)
{
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 4329b81..60dda13 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x7c000000 @ physical
@@ -32,7 +32,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x42000000
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index d04a6ea..ad47704 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =GEMINI_UART_BASE @ physical
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
index 83e536d..45371eb 100644
--- a/arch/arm/mach-gemini/include/mach/vmalloc.h
+++ b/arch/arm/mach-gemini/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* (at your option) any later version.
*/
-#define VMALLOC_END 0xF0000000
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 6294a13..a9ee8f0 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index a0f60e5..8b390e3 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -144,8 +144,7 @@
{
int i;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index d347d65..87a6888 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x16000000 @ physical base address
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3f35293..66ef86d6 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -558,9 +558,7 @@
{
int i;
- for (i = 0; i < ARRAY_SIZE(cp_lookups); i++)
- clkdev_add(&cp_lookups[i]);
-
+ clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 9037d2e..c9d6ba4 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5295809..48642e6 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -61,9 +61,9 @@
(cookie - IOP13XX_PCIE_LOWER_MEM_RA));
break;
case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
- retval = __arm_ioremap(IOP13XX_PBI_LOWER_MEM_PA +
+ retval = __arm_ioremap_caller(IOP13XX_PBI_LOWER_MEM_PA +
(cookie - IOP13XX_PBI_LOWER_MEM_RA),
- size, mtype);
+ size, mtype, __builtin_return_address(0));
break;
case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
@@ -75,7 +75,8 @@
retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
break;
default:
- retval = __arm_ioremap(cookie, size, mtype);
+ retval = __arm_ioremap_caller(cookie, size, mtype,
+ __builtin_return_address(0));
}
return retval;
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 58b0166..736afe1 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mov \rx, #0xfe000000 @ physical as well as virtual
orr \rx, \rx, #0x00800000 @ location of the UART
.endm
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
index 85ceb09..c4862d4 100644
--- a/arch/arm/mach-iop32x/include/mach/vmalloc.h
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-iop32x/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe000000
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index a60c9ef..addb2da 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
index f9f99de..48331dc 100644
--- a/arch/arm/mach-iop33x/include/mach/vmalloc.h
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-iop33x/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe000000
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 904ff56..6a82768 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc0000000 @ Physical base
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
index d195e35..61c8dae 100644
--- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
-#define VMALLOC_END 0xfb000000
+#define VMALLOC_END 0xfb000000UL
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 905db31..a82e3754 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
index dd519f6..896c56a 100644
--- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* specific static I/O.
*/
-#define VMALLOC_END (0xec000000)
+#define VMALLOC_END (0xec000000UL)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3bbf40f..71728d3 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -427,6 +427,17 @@
}
/*
+ * sched_clock()
+ */
+unsigned long long sched_clock(void)
+{
+ cycle_t cyc = ixp4xx_get_cycles(NULL);
+ struct clocksource *cs = &clocksource_ixp4xx;
+
+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
* clockevents
*/
static int ixp4xx_set_next_event(unsigned long evt,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 7c6a691..893873e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
index 7b3580b..9bcd64d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
/*
* arch/arm/mach-ixp4xx/include/mach/vmalloc.h
*/
-#define VMALLOC_END (0xFF000000)
+#define VMALLOC_END (0xff000000UL)
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c1..d060677 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
index 8f48260..bf162ca 100644
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-kirkwood/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe800000
+#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index 3782c35..cf2095d 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KS8695_UART_PA @ physical base address
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 34eed2a..b69ed34 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 85141ed..c0dcbbb 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
@ It is not known if this will be appropriate for every 40x
@ board.
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00000700 @ offset from base
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
index 3fbd494..d62da73 100644
--- a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
* version 2 as published by the Free Software Foundation.
*
*/
-#define VMALLOC_END (0xe8000000)
+#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index a8c20bd..3136c91 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/loki.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =LOKI_REGS_PHYS_BASE
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
index 8dc3bfc..5dcbd86 100644
--- a/arch/arm/mach-loki/include/mach/vmalloc.h
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-loki/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe800000
+#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2a46ed5..886e056 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -88,11 +88,3 @@
return rate;
}
EXPORT_SYMBOL(clk_get_rate);
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index eefffbe..016ae94 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -68,5 +68,3 @@
extern struct clk clk_pxa168_gpio;
extern struct clk clk_pxa168_timers;
-
-extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index a850f87..76deff2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/addr-map.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =APB_PHYS_BASE @ physical
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
index b60ccaf..1d0bac0 100644
--- a/arch/arm/mach-mmp/include/mach/vmalloc.h
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* linux/arch/arm/mach-mmp/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe000000
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 37dbdde..1873c82 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -94,7 +94,7 @@
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa168_mfp_addr_map);
pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
- clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+ clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
}
return 0;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index d404950..46f2d69 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -131,7 +131,7 @@
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa910_mfp_addr_map);
pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
- clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+ clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
}
return 0;
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index d48747e..528750f 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h>
#ifdef CONFIG_MSM_DEBUG_UART
- .macro addruart,rx
+ .macro addruart, rx, tmp
@ see if the MMU is enabled and select appropriate base address
mrc p15, 0, \rx, c1, c0
tst \rx, #1
@@ -40,7 +40,7 @@
beq 1001b
.endm
#else
- .macro addruart,rx
+ .macro addruart, rx, tmp
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 1c5e7da..05f96b7 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -76,5 +76,6 @@
mtype = MT_DEVICE_NONSHARED;
}
- return __arm_ioremap(phys_addr, size, mtype);
+ return __arm_ioremap_caller(phys_addr, size, mtype,
+ __builtin_return_address(0));
}
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index a06442f..cd81689 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =MV78XX0_REGS_PHYS_BASE
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
index 1c49543..ba26fe9 100644
--- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-mv78xx0/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfe000000
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index d1b5885..6cf2d4a 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -570,7 +570,6 @@
int __init mx1_clocks_init(unsigned long fref)
{
unsigned int reg;
- int i;
/* disable clocks we are able to */
__raw_writel(0, SCM_GCCR);
@@ -592,8 +591,7 @@
reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
clko_clk.parent = (struct clk *)clko_clocks[reg];
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
clk_enable(&hclk);
clk_enable(&fclk);
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 91901b5..e82b489 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -968,7 +968,6 @@
*/
int __init mx21_clocks_init(unsigned long lref, unsigned long href)
{
- int i;
u32 cscr;
external_low_reference = lref;
@@ -986,8 +985,7 @@
else
spll_clk.parent = &fpm_clk;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clock gates */
__raw_writel(0, CCM_PCCR0);
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index b010bf9..18c53a6 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -719,7 +719,6 @@
int __init mx27_clocks_init(unsigned long fref)
{
u32 cscr = __raw_readl(CCM_CSCR);
- int i;
external_high_reference = fref;
@@ -736,8 +735,7 @@
to2_adjust_clocks();
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clocks we do not need */
__raw_writel(0, CCM_PCCR0);
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6acc88b..37e1359 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -218,10 +218,7 @@
int __init mx25_clocks_init(void)
{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clocks except the ones we need to survive, namely:
* EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7584b4c..f3f41fa 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -485,15 +485,13 @@
int __init mx35_clocks_init()
{
- int i;
unsigned int ll = 0;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
#endif
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clocks except the ones we need to survive, namely:
* EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 27a318a..b5c39a0 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -578,12 +578,10 @@
int __init mx31_clocks_init(unsigned long fref)
{
u32 reg;
- int i;
ckih_rate = fref;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* change the csi_clk parent if necessary */
reg = __raw_readl(MXC_CCM_CCMR);
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
index ecfa37f..5c85075 100644
--- a/arch/arm/mach-mxc91231/clock.c
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -624,7 +624,6 @@
int __init mxc91231_clocks_init(unsigned long fref)
{
void __iomem *gpt_base;
- int i;
ckih_rate = fref;
@@ -632,8 +631,7 @@
sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 11b9d5b..e96339e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x00100000 @ physical
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e876990..4f92acf 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000 @ physical base address
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
index be12e31..f83d574 100644
--- a/arch/arm/mach-nomadik/include/mach/vmalloc.h
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -1,2 +1,2 @@
-#define VMALLOC_END 0xe8000000
+#define VMALLOC_END 0xe8000000UL
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index c9530fb..0859336 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/regs-board-a9m9750dev.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
index fe964d3..c865197 100644
--- a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xf0000000)
+#define VMALLOC_END (0xf0000000UL)
#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
new file mode 100644
index 0000000..2bc40a2
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_NUC93X
+
+config CPU_NUC932
+ bool
+ help
+ Support for NUC932 of Nuvoton NUC93X CPUs.
+
+menu "NUC932 Machines"
+
+config MACH_NUC932EVB
+ bool "Nuvoton NUC932 Evaluation Board"
+ default y
+ select CPU_NUC932
+ help
+ Say Y here if you are using the Nuvoton NUC932EVB
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
new file mode 100644
index 0000000..440e2de
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o time.o dev.o cpu.o clock.o
+# NUC932 CPU support files
+
+obj-$(CONFIG_CPU_NUC932) += nuc932.o
+
+# machine support
+
+obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
new file mode 100644
index 0000000..a057b54
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
new file mode 100644
index 0000000..0521efb
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 27000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc93x_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(NUC93X_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, NUC93X_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
new file mode 100644
index 0000000..18e51be
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void nuc93x_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc93x_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
new file mode 100644
index 0000000..f6ff5d8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-nuc93x/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC93x series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc93x_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial nuc932 clock declarations. */
+static DEFINE_CLK(audio, 2);
+static DEFINE_CLK(sd, 3);
+static DEFINE_CLK(jpg, 4);
+static DEFINE_CLK(video, 5);
+static DEFINE_CLK(vpost, 6);
+static DEFINE_CLK(2d, 7);
+static DEFINE_CLK(gpu, 8);
+static DEFINE_CLK(gdma, 9);
+static DEFINE_CLK(adc, 10);
+static DEFINE_CLK(uart, 11);
+static DEFINE_CLK(spi, 12);
+static DEFINE_CLK(pwm, 13);
+static DEFINE_CLK(timer, 14);
+static DEFINE_CLK(wdt, 15);
+static DEFINE_CLK(ac97, 16);
+static DEFINE_CLK(i2s, 16);
+static DEFINE_CLK(usbck, 17);
+static DEFINE_CLK(usb48, 18);
+static DEFINE_CLK(usbh, 19);
+static DEFINE_CLK(i2c, 20);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc932_clkregs[] = {
+ DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
+ DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
+ DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
+ DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
+ DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
+ DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
+ DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
+ DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
+ DEF_CLKLOOK(&clk_uart, NULL, "uart"),
+ DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
+ DEF_CLKLOOK(&clk_timer, NULL, "timer"),
+ DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
+ DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
+ DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
+ DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
+ DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
+ DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc93x_uart_data[] = {
+ NUC93X_8250PORT(UART0),
+ {},
+};
+
+struct platform_device nuc93x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc93x_uart_data,
+ },
+};
+
+/*Init NUC93x evb io*/
+
+void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
+
+ idcode = __raw_readl(NUC93XPDID);
+ if (idcode == NUC932_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else
+ printk(KERN_ERR "CPU type detect error!\n");
+
+}
+
+/*Init NUC93x clock*/
+
+void __init nuc93x_init_clocks(void)
+{
+ clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
+}
+
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
new file mode 100644
index 0000000..9def28197
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-nuc93x/cpu.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for NUC93X CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y) \
+{ \
+ .virtual = (unsigned long)NUC93X_VA_##y, \
+ .pfn = __phys_to_pfn(NUC93X_PA_##y), \
+ .length = NUC93X_SZ_##y, \
+ .type = MT_DEVICE, \
+}
+
+#define NUC93X_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 57139200, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+}
+
+/*Cpu identifier register*/
+
+#define NUC93XPDID NUC93X_VA_GCR
+#define NUC932_CPUID 0x29550091
+
+/* extern file from cpu.c */
+
+extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
+extern void nuc93x_init_clocks(void);
+extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc93x_board_init(struct platform_device **device, int size);
+extern struct platform_device nuc93x_serial_device;
+
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
new file mode 100644
index 0000000..a962ae9
--- /dev/null
+++ b/arch/arm/mach-nuc93x/dev.c
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/arm/mach-nuc93x/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include "cpu.h"
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc93x_public_dev[] __initdata = {
+ &nuc93x_serial_device,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc93x_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
new file mode 100644
index 0000000..1352cbd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/entry-macro.S
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #AIC_BA
+
+ ldr \irqnr, [ \base, #AIC_IPER]
+ ldr \irqnr, [ \base, #AIC_ISNR]
+ cmp \irqnr, #0
+
+ .endm
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
new file mode 100644
index 0000000..fb5c6fc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
new file mode 100644
index 0000000..72e5051
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a) (a)
+#define __io(a) __typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
new file mode 100644
index 0000000..7c4aa71
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/irqs.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NUC93X_IRQ(x) (x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT NUC93X_IRQ(1)
+#define IRQ_IRQ0 NUC93X_IRQ(2)
+#define IRQ_IRQ1 NUC93X_IRQ(3)
+#define IRQ_IRQ2 NUC93X_IRQ(4)
+#define IRQ_IRQ3 NUC93X_IRQ(5)
+#define IRQ_USBH NUC93X_IRQ(6)
+#define IRQ_APU NUC93X_IRQ(7)
+#define IRQ_VPOST NUC93X_IRQ(8)
+#define IRQ_ADC NUC93X_IRQ(9)
+#define IRQ_UART0 NUC93X_IRQ(10)
+#define IRQ_TIMER0 NUC93X_IRQ(11)
+#define IRQ_GPU0 NUC93X_IRQ(12)
+#define IRQ_GPU1 NUC93X_IRQ(13)
+#define IRQ_GPU2 NUC93X_IRQ(14)
+#define IRQ_GPU3 NUC93X_IRQ(15)
+#define IRQ_GPU4 NUC93X_IRQ(16)
+#define IRQ_VIN NUC93X_IRQ(17)
+#define IRQ_USBD NUC93X_IRQ(18)
+#define IRQ_VRAMLD NUC93X_IRQ(19)
+#define IRQ_GDMA0 NUC93X_IRQ(20)
+#define IRQ_GDMA1 NUC93X_IRQ(21)
+#define IRQ_SDIO NUC93X_IRQ(22)
+#define IRQ_FMI NUC93X_IRQ(22)
+#define IRQ_JPEG NUC93X_IRQ(23)
+#define IRQ_SPI0 NUC93X_IRQ(24)
+#define IRQ_SPI1 NUC93X_IRQ(25)
+#define IRQ_RTC NUC93X_IRQ(26)
+#define IRQ_PWM0 NUC93X_IRQ(27)
+#define IRQ_PWM1 NUC93X_IRQ(28)
+#define IRQ_PWM2 NUC93X_IRQ(29)
+#define IRQ_PWM3 NUC93X_IRQ(30)
+#define IRQ_I2SAC97 NUC93X_IRQ(31)
+#define IRQ_CAP0 IRQ_PWM0
+#define IRQ_CAP1 IRQ_PWM1
+#define IRQ_CAP2 IRQ_PWM2
+#define IRQ_CAP3 IRQ_PWM3
+#define NR_IRQS (IRQ_I2SAC97 + 1)
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
new file mode 100644
index 0000000..fd0b5e8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/map.h
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#define MAP_OFFSET (0xfff00000)
+#define CLK_OFFSET (0x10)
+
+#ifndef __ASSEMBLY__
+#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
+#else
+#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
+#endif
+
+ /*
+ * nuc932 hardware register definition
+ */
+
+#define NUC93X_PA_IRQ (0xFFF83000)
+#define NUC93X_PA_GCR (0xFFF00000)
+#define NUC93X_PA_EBI (0xFFF01000)
+#define NUC93X_PA_UART (0xFFF80000)
+#define NUC93X_PA_TIMER (0xFFF81000)
+#define NUC93X_PA_GPIO (0xFFF84000)
+#define NUC93X_PA_GDMA (0xFFF03000)
+#define NUC93X_PA_USBHOST (0xFFF0d000)
+#define NUC93X_PA_I2C (0xFFF89000)
+#define NUC93X_PA_LCD (0xFFF06000)
+#define NUC93X_PA_GE (0xFFF05000)
+#define NUC93X_PA_ADC (0xFFF85000)
+#define NUC93X_PA_RTC (0xFFF87000)
+#define NUC93X_PA_PWM (0xFFF82000)
+#define NUC93X_PA_ACTL (0xFFF0a000)
+#define NUC93X_PA_USBDEV (0xFFF0C000)
+#define NUC93X_PA_JEPEG (0xFFF0e000)
+#define NUC93X_PA_CACHE_T (0xFFF60000)
+#define NUC93X_PA_VRAM (0xFFF0b000)
+#define NUC93X_PA_DMAC (0xFFF09000)
+#define NUC93X_PA_I2SM (0xFFF08000)
+#define NUC93X_PA_CACHE (0xFFF02000)
+#define NUC93X_PA_GPU (0xFFF04000)
+#define NUC93X_PA_VIDEOIN (0xFFF07000)
+#define NUC93X_PA_SPI0 (0xFFF86000)
+#define NUC93X_PA_SPI1 (0xFFF88000)
+
+ /*
+ * nuc932 virtual address mapping.
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
+#define NUC93X_SZ_IRQ SZ_4K
+
+#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
+#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
+#define NUC93X_SZ_GCR SZ_4K
+
+/* EBI management */
+
+#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
+#define NUC93X_SZ_EBI SZ_4K
+
+/* UARTs */
+
+#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
+#define NUC93X_SZ_UART SZ_4K
+
+/* Timers */
+
+#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
+#define NUC93X_SZ_TIMER SZ_4K
+
+/* GPIO ports */
+
+#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
+#define NUC93X_SZ_GPIO SZ_4K
+
+/* GDMA control */
+
+#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
+#define NUC93X_SZ_GDMA SZ_4K
+
+/* I2C hardware controller */
+
+#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
+#define NUC93X_SZ_I2C SZ_4K
+
+/* LCD controller*/
+
+#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
+#define NUC93X_SZ_LCD SZ_4K
+
+/* 2D controller*/
+
+#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
+#define NUC93X_SZ_GE SZ_4K
+
+/* ADC */
+
+#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
+#define NUC93X_SZ_ADC SZ_4K
+
+/* RTC */
+
+#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
+#define NUC93X_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+
+#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
+#define NUC93X_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+
+#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
+#define NUC93X_SZ_ACTL SZ_4K
+
+/* USB Device port */
+
+#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
+#define NUC93X_SZ_USBDEV SZ_4K
+
+/* USB host controller*/
+#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
+#define NUC93X_SZ_USBHOST SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
new file mode 100644
index 0000000..323ab0d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/memory.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
new file mode 100644
index 0000000..5cb2954
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA NUC93X_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
new file mode 100644
index 0000000..3c72550
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA NUC93X_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
new file mode 100644
index 0000000..2302159
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA NUC93X_VA_IRQ
+
+#define REG_AIC_IRQSC (AIC_BA+0x80)
+#define REG_AIC_GEN (AIC_BA+0x84)
+#define REG_AIC_GASR (AIC_BA+0x88)
+#define REG_AIC_GSCR (AIC_BA+0x8C)
+#define REG_AIC_IRSR (AIC_BA+0x100)
+#define REG_AIC_IASR (AIC_BA+0x104)
+#define REG_AIC_ISR (AIC_BA+0x108)
+#define REG_AIC_IPER (AIC_BA+0x10C)
+#define REG_AIC_ISNR (AIC_BA+0x110)
+#define REG_AIC_IMR (AIC_BA+0x114)
+#define REG_AIC_OISR (AIC_BA+0x118)
+#define REG_AIC_MECR (AIC_BA+0x120)
+#define REG_AIC_MDCR (AIC_BA+0x124)
+#define REG_AIC_SSCR (AIC_BA+0x128)
+#define REG_AIC_SCCR (AIC_BA+0x12C)
+#define REG_AIC_EOSCR (AIC_BA+0x130)
+#define AIC_IPER (0x10C)
+#define AIC_ISNR (0x110)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
new file mode 100644
index 0000000..767a047
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA NUC93X_VA_UART
+#define UART1_BA (NUC93X_VA_UART+0x100)
+
+#define UART0_PA NUC93X_PA_UART
+#define UART1_PA (NUC93X_PA_UART+0x100)
+
+
+#ifndef __ASSEMBLY__
+
+struct nuc93x_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+struct nuc93x_uartcfg {
+ unsigned char hwport;
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags;
+
+ unsigned long ucon;
+ unsigned long ulcon;
+ unsigned long ufcon;
+
+ struct nuc93x_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
new file mode 100644
index 0000000..394be96
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA NUC93X_VA_TIMER
+#define REG_TCSR0 (TMR_BA+0x00)
+#define REG_TICR0 (TMR_BA+0x08)
+#define REG_TDR0 (TMR_BA+0x10)
+#define REG_TISR (TMR_BA+0x18)
+#define REG_WTCR (TMR_BA+0x1C)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
new file mode 100644
index 0000000..d26bd9a
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/machnuc93x/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ cpu_reset(0);
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
new file mode 100644
index 0000000..0c719cc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
new file mode 100644
index 0000000..73082cd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+#include <linux/serial_reg.h>
+
+#define arch_decomp_wdog()
+
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+static u32 * uart_base = (u32 *)UART0_PA;
+
+static void putc(int ch)
+{
+ /* Check THRE and TEMT bits before we transmit the character.
+ */
+ while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+ barrier();
+
+ *uart_base = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
new file mode 100644
index 0000000..98a21b8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
new file mode 100644
index 0000000..a7a88ea
--- /dev/null
+++ b/arch/arm/mach-nuc93x/irq.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-nuc93x/irq.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void nuc93x_irq_mask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void nuc93x_irq_ack(unsigned int irq)
+{
+ __raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void nuc93x_irq_unmask(unsigned int irq)
+{
+ __raw_writel(1 << irq, REG_AIC_MECR);
+
+}
+
+static struct irq_chip nuc93x_irq_chip = {
+ .ack = nuc93x_irq_ack,
+ .mask = nuc93x_irq_mask,
+ .unmask = nuc93x_irq_unmask,
+};
+
+void __init nuc93x_init_irq(void)
+{
+ int irqno;
+
+ __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+ for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
+ set_irq_chip(irqno, &nuc93x_irq_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
new file mode 100644
index 0000000..9f79266
--- /dev/null
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc932.h"
+
+static void __init nuc932evb_map_io(void)
+{
+ nuc932_map_io();
+ nuc932_init_clocks();
+ nuc932_init_uartclk();
+}
+
+static void __init nuc932evb_init(void)
+{
+ nuc932_board_init();
+}
+
+MACHINE_START(NUC932EVB, "NUC932EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = NUC93X_PA_UART,
+ .io_pg_offst = (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc932evb_map_io,
+ .init_irq = nuc93x_init_irq,
+ .init_machine = nuc932evb_init,
+ .timer = &nuc93x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
new file mode 100644
index 0000000..3966ead
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-nuc93x/nuc932.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC932 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc932_dev[] __initdata = {
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc932evb_iodesc[] __initdata = {
+};
+
+/*Init NUC932 evb io*/
+
+void __init nuc932_map_io(void)
+{
+ nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
+}
+
+/*Init NUC932 clock*/
+
+void __init nuc932_init_clocks(void)
+{
+ nuc93x_init_clocks();
+}
+
+/*enable NUC932 uart clock*/
+
+void __init nuc932_init_uartclk(void)
+{
+ struct clk *ck_uart = clk_get(NULL, "uart");
+ BUG_ON(IS_ERR(ck_uart));
+
+ clk_enable(ck_uart);
+}
+
+/*Init NUC932 board info*/
+
+void __init nuc932_board_init(void)
+{
+ nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
+}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
new file mode 100644
index 0000000..9a66edd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-nuc93x/nuc932.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC93x CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc93x_init_irq(void);
+extern struct sys_timer nuc93x_timer;
+
+/* extern file from nuc932.c */
+
+extern void nuc932_board_init(void);
+extern void nuc932_init_clocks(void);
+extern void nuc932_map_io(void);
+extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
new file mode 100644
index 0000000..2f90f9d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/time.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-nuc93x/time.c
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define RESETINT 0x01
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static unsigned long nuc93x_gettimeoffset(void)
+{
+ return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ __raw_writel(0x01, REG_TISR); /* clear TIF0 */
+ return IRQ_HANDLED;
+}
+
+static struct irqaction nuc93x_timer_irq = {
+ .name = "nuc93x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = nuc93x_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void nuc93x_timer_setup(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ struct clk *ck_timer = clk_get(NULL, "timer");
+ unsigned int rate, val = 0;
+
+ BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
+
+ clk_enable(ck_timer);
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(RESETINT, REG_TISR);
+
+ timer0_load = (rate / TICKS_PER_SEC);
+ __raw_writel(timer0_load, REG_TICR0);
+
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ __raw_writel(val, REG_TCSR0);
+
+}
+
+static void __init nuc93x_timer_init(void)
+{
+ nuc93x_timer_setup();
+ setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
+}
+
+struct sys_timer nuc93x_timer = {
+ .init = nuc93x_timer_init,
+ .offset = nuc93x_gettimeoffset,
+ .resume = nuc93x_timer_setup
+};
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ce17f1..b6a537c 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
obj-y += clock.o clock_data.o opp_data.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 7e70c3c..096f2ed 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -18,18 +18,19 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/gpio.h>
#include <plat/mux.h>
+#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
#include <plat/common.h>
@@ -150,9 +151,9 @@
},
};
-static struct flash_platform_data nor_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data nor_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
@@ -164,7 +165,7 @@
};
static struct platform_device nor_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_data,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fa7cece..d1100e4 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -26,6 +26,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
@@ -35,7 +36,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
@@ -45,6 +45,7 @@
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/common.h>
+#include <plat/flash.h>
#include "board-h2.h"
@@ -121,9 +122,9 @@
}
};
-static struct flash_platform_data h2_nor_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data h2_nor_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = h2_nor_partitions,
.nr_parts = ARRAY_SIZE(h2_nor_partitions),
};
@@ -134,7 +135,7 @@
};
static struct platform_device h2_nor_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &h2_nor_data,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 6a7f9c3..a53ab82 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -25,6 +25,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
@@ -37,7 +38,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
@@ -47,6 +47,7 @@
#include <plat/keypad.h>
#include <plat/dma.h>
#include <plat/common.h>
+#include <plat/flash.h>
#include "board-h3.h"
@@ -126,9 +127,9 @@
}
};
-static struct flash_platform_data nor_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data nor_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
@@ -139,7 +140,7 @@
};
static struct platform_device nor_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_data,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2133b00..5d12fd3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -22,16 +22,17 @@
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
+#include <plat/flash.h>
#include <plat/fpga.h>
#include <mach/gpio.h>
#include <plat/tc.h>
@@ -94,9 +95,9 @@
}
};
-static struct flash_platform_data innovator_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data innovator_flash_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = innovator_partitions,
.nr_parts = ARRAY_SIZE(innovator_partitions),
};
@@ -108,7 +109,7 @@
};
static struct platform_device innovator_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &innovator_flash_data,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ccea4f4..80d8620 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -37,6 +37,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
@@ -46,8 +47,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
+#include <plat/flash.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
@@ -94,9 +95,9 @@
}
};
-static struct flash_platform_data osk_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data osk_flash_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = osk_partitions,
.nr_parts = ARRAY_SIZE(osk_partitions),
};
@@ -107,7 +108,7 @@
};
static struct platform_device osk5912_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &osk_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 9fe8872..569b4c9 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@@ -31,9 +32,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/gpio.h>
+#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/tc.h>
@@ -126,9 +127,9 @@
},
};
-static struct flash_platform_data palmte_rom_data = {
- .map_name = "map_rom",
+static struct physmap_flash_data palmte_rom_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = palmte_rom_partitions,
.nr_parts = ARRAY_SIZE(palmte_rom_partitions),
};
@@ -140,7 +141,7 @@
};
static struct platform_device palmte_rom_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = -1,
.dev = {
.platform_data = &palmte_rom_data,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index af068e3..6ad49a2 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -21,16 +21,17 @@
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <plat/led.h>
#include <mach/gpio.h>
+#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
@@ -104,9 +105,9 @@
}
};
-static struct flash_platform_data palmtt_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data palmtt_flash_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = palmtt_partitions,
.nr_parts = ARRAY_SIZE(palmtt_partitions),
};
@@ -118,7 +119,7 @@
};
static struct platform_device palmtt_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &palmtt_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c7a3b6f..6641de9 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -25,14 +25,15 @@
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/gpio.h>
+#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/dma.h>
@@ -126,10 +127,9 @@
},
};
-static struct flash_platform_data palmz71_rom_data = {
- .map_name = "map_rom",
- .name = "onboardrom",
+static struct physmap_flash_data palmz71_rom_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = palmz71_rom_partitions,
.nr_parts = ARRAY_SIZE(palmz71_rom_partitions),
};
@@ -141,7 +141,7 @@
};
static struct platform_device palmz71_rom_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = -1,
.dev = {
.platform_data = &palmz71_rom_data,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1387a4f..e854d57 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -18,19 +18,20 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
+#include <plat/flash.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -117,9 +118,9 @@
},
};
-static struct flash_platform_data nor_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data nor_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
@@ -131,7 +132,7 @@
};
static struct platform_device nor_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_data,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7a97fac..2fb1e5f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -22,6 +22,7 @@
#include <linux/notifier.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/errno.h>
@@ -29,10 +30,10 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
+#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
@@ -287,9 +288,9 @@
}
};
-static struct flash_platform_data sx1_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data sx1_flash_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
.parts = sx1_partitions,
.nr_parts = ARRAY_SIZE(sx1_partitions),
};
@@ -310,7 +311,7 @@
};
static struct platform_device sx1_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
@@ -327,7 +328,7 @@
};
static struct platform_device sx1_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 1691835..87b9436 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -18,6 +18,7 @@
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/mtd/physmap.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/serial_8250.h>
@@ -27,11 +28,11 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/common.h>
#include <mach/gpio.h>
+#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
@@ -86,9 +87,9 @@
}
arch_initcall(ext_uart_init);
-static struct flash_platform_data voiceblue_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data voiceblue_flash_data = {
.width = 2,
+ .set_vpp = omap1_set_vpp,
};
static struct resource voiceblue_flash_resource = {
@@ -98,7 +99,7 @@
};
static struct platform_device voiceblue_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &voiceblue_flash_data,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 04f1d29..e0aec10 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap1/clock.c
*
- * Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* Modified to use omap shared clock framework by
@@ -38,26 +38,6 @@
* Omap1 specific clock functions
*-------------------------------------------------------------------------*/
-static int clk_omap1_dummy_enable(struct clk *clk)
-{
- return 0;
-}
-
-static void clk_omap1_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clkops_dummy = {
- .enable = clk_omap1_dummy_enable,
- .disable = clk_omap1_dummy_disable,
-};
-
-/* XXX can be replaced with a fixed_divisor_recalc */
-unsigned long omap1_watchdog_recalc(struct clk *clk)
-{
- return clk->parent->rate / 14;
-}
-
unsigned long omap1_uart_recalc(struct clk *clk)
{
unsigned int val = __raw_readl(clk->enable_reg);
@@ -577,9 +557,6 @@
long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (clk->flags & RATE_FIXED)
- return clk->rate;
-
if (clk->round_rate != NULL)
return clk->round_rate(clk, rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 65e7b5b..aa8558a 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-omap1/clock_data.c
*
- * Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
@@ -27,13 +27,6 @@
* Omap1 clocks
*-------------------------------------------------------------------------*/
-/* XXX is this necessary? */
-static struct clk dummy_ck = {
- .name = "dummy",
- .ops = &clkops_dummy,
- .flags = RATE_FIXED,
-};
-
static struct clk ck_ref = {
.name = "ck_ref",
.ops = &clkops_null,
@@ -149,7 +142,8 @@
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
- .recalc = &omap1_watchdog_recalc,
+ .fixed_div = 14,
+ .recalc = &omap_fixed_divisor_recalc,
},
.idlect_shift = 0,
};
@@ -388,8 +382,7 @@
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT |
- CLOCK_NO_IDLE_PARENT,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29,
},
@@ -429,8 +422,7 @@
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT |
- CLOCK_NO_IDLE_PARENT,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31,
},
@@ -442,7 +434,7 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 6000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
};
@@ -452,7 +444,7 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
- .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
};
@@ -463,7 +455,7 @@
/* Direct from ULPD, no parent */
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
- .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
};
@@ -473,7 +465,6 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
- .flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 4,
};
@@ -483,7 +474,6 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
- .flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 8,
};
@@ -493,7 +483,6 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 6,
};
@@ -514,7 +503,6 @@
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = RATE_FIXED,
};
static struct clk bclk_16xx = {
@@ -529,36 +517,34 @@
};
static struct clk mmc1_ck = {
- .name = "mmc_ck",
+ .name = "mmc1_ck",
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 23,
};
static struct clk mmc2_ck = {
- .name = "mmc_ck",
- .id = 1,
+ .name = "mmc2_ck",
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
};
static struct clk mmc3_ck = {
- .name = "mmc_ck",
- .id = 2,
+ .name = "mmc3_ck",
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 12,
};
@@ -576,7 +562,6 @@
remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
- .id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armxor_ck.clk,
@@ -585,7 +570,6 @@
static struct clk i2c_ick = {
.name = "i2c_ick",
- .id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armper_ck.clk,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index a2d07aa..379100c 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -73,7 +73,7 @@
# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1
#endif
-#define OMAP1_MBOX_BASE OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE OMAP16XX_MAILBOX_BASE
static struct resource mbox_resources[] = {
{
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
new file mode 100644
index 0000000..0b07a78
--- /dev/null
+++ b/arch/arm/mach-omap1/flash.c
@@ -0,0 +1,33 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#include <plat/io.h>
+#include <plat/tc.h>
+
+void omap1_set_vpp(struct map_info *map, int enable)
+{
+ static int count;
+ u32 l;
+
+ if (enable) {
+ if (count++ == 0) {
+ l = omap_readl(EMIFS_CONFIG);
+ l |= OMAP_EMIFS_CONFIG_WP;
+ omap_writel(l, EMIFS_CONFIG);
+ }
+ } else {
+ if (count && (--count == 0)) {
+ l = omap_readl(EMIFS_CONFIG);
+ l &= ~OMAP_EMIFS_CONFIG_WP;
+ omap_writel(l, EMIFS_CONFIG);
+ }
+ }
+}
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 1bf4735..5446c99 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -23,9 +23,7 @@
#include <plat/mux.h>
#include <plat/cpu.h>
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
+void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
@@ -34,6 +32,4 @@
omap_cfg_reg(I2C_SDA);
omap_cfg_reg(I2C_SCL);
}
-
- return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
}
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746..b6d9584 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,18 +11,80 @@
*
*/
- .macro addruart,rx
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
+ .pushsection .data
+omap_uart_phys: .word 0x0
+omap_uart_virt: .word 0x0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
+ .macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+9: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check 7XX UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- orr \rx, \rx, #0x00009000 @ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
- orr \rx, \rx, #0x00000800 @ UART 2 & 3
-#endif
+ orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
+ ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
+ cmp \rx, #0 @ anything in 7XX scratchpad?
+ bne 10f @ found 7XX uart
+
+ /* Check 15xx/16xx UART1 scratchpad register for uart to use */
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xff000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
+ ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+
+ /* Select the UART to use based on the UART1 scratchpad value */
+10: cmp \rx, #0 @ no port configured?
+ beq 11f @ if none, try to use UART1
+ cmp \rx, #OMAP1UART1
+ beq 11f @ configure OMAP1UART1
+ cmp \rx, #OMAP1UART2
+ beq 12f @ configure OMAP1UART2
+ cmp \rx, #OMAP1UART3
+ beq 13f @ configure OMAP2UART3
+
+ /* Configure the UART offset from the phys/virt base */
+11: mov \rx, #0x00fb0000 @ OMAP1UART1
+ b 98f
+12: mov \rx, #0x00fb0000 @ OMAP1UART1
+ orr \rx, \rx, #0x00000800 @ OMAP1UART2
+ b 98f
+13: mov \rx, #0x00fb0000 @ OMAP1UART1
+ orr \rx, \rx, #0x00000800 @ OMAP1UART2
+ orr \rx, \rx, #0x00009000 @ OMAP1UART3
+
+ /* Store both phys and virt address for the uart */
+98: add \rx, \rx, #0xff000000 @ phys base
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ sub \rx, \rx, #0xff000000 @ phys base
+ add \rx, \rx, #0xfe000000 @ virt base
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ b 9b
+99:
.endm
.macro senduart,rd,rx
@@ -30,13 +92,13 @@
.endm
.macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
+1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
+ ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
1002:
.endm
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index caf889a..4f5b3da 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -146,7 +146,6 @@
static int __devinit omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *res;
- int ret = 0;
if (pdev->num_resources != 2) {
dev_err(&pdev->dev, "invalid number of resources: %d\n",
@@ -160,12 +159,18 @@
dev_err(&pdev->dev, "invalid mem resource\n");
return -ENODEV;
}
- mbox_base = res->start;
+
+ mbox_base = ioremap(res->start, resource_size(res));
+ if (!mbox_base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -ENODEV;
+ }
/* DSP IRQ */
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!res)) {
dev_err(&pdev->dev, "invalid irq resource\n");
+ iounmap(mbox_base);
return -ENODEV;
}
mbox_dsp_info.irq = res->start;
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 6bddce1..f9a5cf7 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -99,9 +99,11 @@
},
};
#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata)
+#define OMAP7XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
#else
#define omap7xx_mcbsp_pdata NULL
#define OMAP7XX_MCBSP_PDATA_SZ 0
+#define OMAP7XX_MCBSP_REG_NUM 0
#endif
#ifdef CONFIG_ARCH_OMAP15XX
@@ -132,9 +134,11 @@
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#define OMAP15XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
#else
#define omap15xx_mcbsp_pdata NULL
#define OMAP15XX_MCBSP_PDATA_SZ 0
+#define OMAP15XX_MCBSP_REG_NUM 0
#endif
#ifdef CONFIG_ARCH_OMAP16XX
@@ -165,19 +169,25 @@
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#define OMAP16XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
#else
#define omap16xx_mcbsp_pdata NULL
#define OMAP16XX_MCBSP_PDATA_SZ 0
+#define OMAP16XX_MCBSP_REG_NUM 0
#endif
int __init omap1_mcbsp_init(void)
{
- if (cpu_is_omap7xx())
+ if (cpu_is_omap7xx()) {
omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
- if (cpu_is_omap15xx())
+ omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
+ } else if (cpu_is_omap15xx()) {
omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
- if (cpu_is_omap16xx())
+ omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
+ } else if (cpu_is_omap16xx()) {
omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+ omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
+ }
mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
GFP_KERNEL);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6e5207c..349de90 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
- .mapbase = OMAP_UART1_BASE,
+ .mapbase = OMAP1_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -72,7 +72,7 @@
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .mapbase = OMAP_UART2_BASE,
+ .mapbase = OMAP1_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -80,7 +80,7 @@
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
- .mapbase = OMAP_UART3_BASE,
+ .mapbase = OMAP1_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 606bf04..a8a3d1e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,28 +1,19 @@
comment "OMAP Core Type"
depends on ARCH_OMAP2
-config ARCH_OMAP24XX
- bool "OMAP24xx Based System"
- depends on ARCH_OMAP2
-
config ARCH_OMAP2420
bool "OMAP2420 support"
- depends on ARCH_OMAP24XX
+ depends on ARCH_OMAP2
select OMAP_DM_TIMER
select ARCH_OMAP_OTG
config ARCH_OMAP2430
bool "OMAP2430 support"
- depends on ARCH_OMAP24XX
-
-config ARCH_OMAP34XX
- bool "OMAP34xx Based System"
- depends on ARCH_OMAP3
- select USB_ARCH_HAS_EHCI
+ depends on ARCH_OMAP2
config ARCH_OMAP3430
bool "OMAP3430 support"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select ARCH_OMAP_OTG
config OMAP_PACKAGE_CBC
@@ -38,11 +29,11 @@
bool
comment "OMAP Board Type"
- depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
+ depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
- depends on ARCH_OMAP2 && ARCH_OMAP24XX
+ depends on ARCH_OMAP2
config MACH_OMAP2_TUSB6010
bool
@@ -51,55 +42,59 @@
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
- depends on ARCH_OMAP2 && ARCH_OMAP24XX
+ depends on ARCH_OMAP2
select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
- depends on ARCH_OMAP2 && ARCH_OMAP24XX
+ depends on ARCH_OMAP2
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
- depends on ARCH_OMAP2 && ARCH_OMAP24XX
+ depends on ARCH_OMAP2
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
+config MACH_DEVKIT8000
+ bool "DEVKIT8000 board"
+ depends on ARCH_OMAP3
+
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OVERO
bool "Gumstix Overo board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_NOKIA_N800
@@ -120,33 +115,33 @@
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBP
config MACH_CM_T35
bool "CompuLab CM-T35 module"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_IGEP0020
- bool "IGEP0020"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ bool "IGEP v2 board"
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
select OMAP_PACKAGE_CBP
config MACH_OMAP_4430SDP
@@ -162,7 +157,7 @@
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ depends on ARCH_OMAP3
default n
help
If you know that none of your system initiators will attempt to
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b32678b..2069fb3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,15 +5,17 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
-omap-2-3-common = irq.o sdrc.o omap_hwmod.o
-omap-3-4-common = dpll.o
+omap-2-3-common = irq.o sdrc.o
+hwmod-common = omap_hwmod.o \
+ omap_hwmod_common_data.o
prcm-common = prcm.o powerdomain.o
-clock-common = clock.o clock_common_data.o clockdomain.o
+clock-common = clock.o clock_common_data.o \
+ clockdomain.o clkt_dpll.o \
+ clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
- $(omap-3-4-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -26,6 +28,10 @@
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
+AFLAGS_sram242x.o :=-Wa,-march=armv6
+AFLAGS_sram243x.o :=-Wa,-march=armv6
+AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
+
# Pin multiplexing
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
@@ -36,9 +42,13 @@
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
+
+AFLAGS_sleep24xx.o :=-Wa,-march=armv6
+AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
+
endif
# PRCM
@@ -47,14 +57,31 @@
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
+ clkt2xxx_sys.o \
+ clkt2xxx_dpllcore.o \
+ clkt2xxx_virt_prcm_set.o \
+ clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2420) += clock2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430) += clock2430.o clock2430_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
+ clock34xx.o clkt34xx_dpll3m2.o \
+ clock3517.o clock36xx.o \
+ dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
+ dpll3xxx.o
+
+# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o
obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o
+
+# hwmod data
+obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
# EMU peripherals
-obj-$(CONFIG_OMAP3_EMU) += emu.o
+obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
@@ -71,45 +98,48 @@
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- mmc-twl4030.o
+ hsmmc.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- mmc-twl4030.o
+ hsmmc.o \
+ board-sdp-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \
board-rx51-peripherals.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
board-zoom-peripherals.o \
- mmc-twl4030.o \
+ hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
board-zoom-peripherals.o \
- mmc-twl4030.o \
+ hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- mmc-twl4030.o
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
-obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
# Platform specific device init code
obj-y += usb-musb.o
@@ -119,5 +149,8 @@
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
+nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
+obj-y += $(nand-m) $(nand-y)
+
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
obj-y += $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index e508904..01d113f 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
@@ -28,7 +29,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <plat/mux.h>
@@ -38,7 +38,7 @@
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define SDP2430_CS0_BASE 0x04000000
#define SECONDARY_LCD_GPIO 147
@@ -74,8 +74,7 @@
}
};
-static struct flash_platform_data sdp2430_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data sdp2430_flash_data = {
.width = 2,
.parts = sdp2430_partitions,
.nr_parts = ARRAY_SIZE(sdp2430_partitions),
@@ -88,7 +87,7 @@
};
static struct platform_device sdp2430_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sdp2430_flash_data,
@@ -183,7 +182,7 @@
return 0;
}
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
@@ -194,6 +193,12 @@
{} /* Terminator */
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_2430sdp_init(void)
{
int ret;
@@ -202,8 +207,8 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
- twl4030_mmc_init(mmc);
- usb_musb_init();
+ omap2_hsmmc_init(mmc);
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
/* Turn off secondary LCD backlight */
@@ -215,7 +220,7 @@
static void __init omap_2430sdp_map_io(void)
{
omap2_set_globals_243x();
- omap2_map_common_io();
+ omap243x_map_common_io();
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index c90b0d0..a101029 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,9 +41,12 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include <mach/board-sdp.h>
+
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "pm.h"
#define CONFIG_DISABLE_HFCLK 1
@@ -55,6 +58,24 @@
#define TWL4030_MSECURE_GPIO 22
+/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
+static struct cpuidle_params omap3_cpuidle_params_table[] = {
+ /* C1 */
+ {1, 2, 2, 5},
+ /* C2 */
+ {1, 10, 10, 30},
+ /* C3 */
+ {1, 50, 50, 300},
+ /* C4 */
+ {1, 1500, 1800, 4000},
+ /* C5 */
+ {1, 2500, 7500, 12000},
+ /* C6 */
+ {1, 3000, 8500, 15000},
+ /* C7 */
+ {1, 10000, 30000, 300000},
+};
+
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -305,6 +326,7 @@
{
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
@@ -326,7 +348,7 @@
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
};
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
/* 8 bits (default) requires S6.3 == ON,
@@ -363,7 +385,7 @@
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
@@ -520,10 +542,6 @@
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
{
- .supply = "vdvi",
- .dev = &sdp3430_lcd_device.dev,
- },
- {
.supply = "vdds_dsi",
.dev = &sdp3430_dss_device.dev,
}
@@ -650,6 +668,120 @@
#define board_mux NULL
#endif
+static struct mtd_partition sdp_nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "Bootloader-NOR",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "Params-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "Kernel-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "Filesystem-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+ {
+ .name = "X-Loader-OneNAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot Environment-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * (64 * 2048),
+ },
+ {
+ .name = "File System-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader-NAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 10 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "Boot Env-NAND",
+
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
+ .size = 6 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 40 * (64 * 2048),
+ },
+ {
+ .name = "File System - NAND",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
+ },
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+ {
+ .parts = sdp_nor_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+ },
+ {
+ .parts = sdp_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+ },
+ {
+ .parts = sdp_nand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+ },
+};
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_3430sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -664,8 +796,9 @@
ARRAY_SIZE(sdp3430_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
+ sdp_flash_init(sdp_flash_partitions);
sdp3430_display_init();
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
@@ -674,7 +807,7 @@
static void __init omap_3430sdp_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 7390596..4386d2b 100755
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -68,8 +68,8 @@
static void __init omap_sdp_map_io(void)
{
- omap2_set_globals_343x();
- omap2_map_common_io();
+ omap2_set_globals_36xx();
+ omap34xx_map_common_io();
}
static struct omap_board_config_kernel sdp_config[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 0c6be6b..180ac11 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -27,7 +28,9 @@
#include <plat/common.h>
#include <plat/control.h>
#include <plat/timer-gp.h>
+#include <plat/usb.h>
#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
static struct platform_device sdp4430_lcd_device = {
.name = "sdp4430_lcd",
@@ -38,10 +41,6 @@
&sdp4430_lcd_device,
};
-static struct omap_uart_config sdp4430_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
-};
-
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -50,6 +49,59 @@
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
+#ifdef CONFIG_CACHE_L2X0
+noinline void omap_smc1(u32 fn, u32 arg)
+{
+ register u32 r12 asm("r12") = fn;
+ register u32 r0 asm("r0") = arg;
+
+ /* This is common routine cache secure monitor API used to
+ * modify the PL310 secure registers.
+ * r0 contains the value to be modified and "r12" contains
+ * the monitor API number. It uses few CPU registers
+ * internally and hence they need be backed up including
+ * link register "lr".
+ * Explicitly save r11 and r12 the compiler generated code
+ * won't save it.
+ */
+ asm volatile(
+ "stmfd r13!, {r11,r12}\n"
+ "dsb\n"
+ "smc\n"
+ "ldmfd r13!, {r11,r12}\n"
+ : "+r" (r0), "+r" (r12)
+ :
+ : "r4", "r5", "r10", "lr", "cc");
+}
+EXPORT_SYMBOL(omap_smc1);
+
+static int __init omap_l2_cache_init(void)
+{
+ void __iomem *l2cache_base;
+
+ /* To avoid code running on other OMAPs in
+ * multi-omap builds
+ */
+ if (!cpu_is_omap44xx())
+ return -ENODEV;
+
+ /* Static mapping, never released */
+ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
+ BUG_ON(!l2cache_base);
+
+ /* Enable PL310 L2 Cache controller */
+ omap_smc1(0x102, 0x1);
+
+ /* 32KB way size, 16-way associativity,
+ * parity disabled
+ */
+ l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+
+ return 0;
+}
+early_initcall(omap_l2_cache_init);
+#endif
+
static void __init gic_init_irq(void)
{
void __iomem *base;
@@ -77,17 +129,27 @@
omap_gpio_init();
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_UTMI,
+ .mode = MUSB_PERIPHERAL,
+ .power = 100,
+};
static void __init omap_4430sdp_init(void)
{
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
+ /* OMAP4 SDP uses internal transceiver so register nop transceiver */
+ usb_nop_xceiv_register();
+ /* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+ if (!cpu_is_omap44xx())
+ usb_musb_init(&musb_board_data);
}
static void __init omap_4430sdp_map_io(void)
{
omap2_set_globals_443x();
- omap2_map_common_io();
+ omap44xx_map_common_io();
}
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index b4e6eca..70c1861 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -20,8 +20,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/i2c/pca953x.h>
#include <mach/hardware.h>
+#include <mach/am35xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -29,9 +31,228 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include "mux.h"
+#define LCD_PANEL_PWR 176
+#define LCD_PANEL_BKLIGHT_PWR 182
+#define LCD_PANEL_PWM 181
+
+static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("s35390a", 0x30),
+ .type = "s35390a",
+ },
+};
+
+/*
+ * RTC - S35390A
+ */
+#define GPIO_RTCS35390A_IRQ 55
+
+static void __init am3517_evm_rtc_init(void)
+{
+ int r;
+
+ omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
+ r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+ if (r < 0) {
+ printk(KERN_WARNING "failed to request GPIO#%d\n",
+ GPIO_RTCS35390A_IRQ);
+ return;
+ }
+ r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
+ if (r < 0) {
+ printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
+ GPIO_RTCS35390A_IRQ);
+ gpio_free(GPIO_RTCS35390A_IRQ);
+ return;
+ }
+ am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+}
+
+/*
+ * I2C GPIO Expander - TCA6416
+ */
+
+/* Mounted on Base-Board */
+static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+};
+static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = {
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &am3517evm_gpio_expander_info_0,
+ },
+};
+
+/* Mounted on UI Card */
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES + 16,
+};
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES + 32,
+};
+static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
+ {
+ I2C_BOARD_INFO("tca6416", 0x20),
+ .platform_data = &am3517evm_ui_gpio_expander_info_1,
+ },
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &am3517evm_ui_gpio_expander_info_2,
+ },
+};
+
+static int __init am3517_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0,
+ ARRAY_SIZE(am3517evm_tca6416_info_0));
+ omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info,
+ ARRAY_SIZE(am3517evm_ui_tca6416_info));
+
+ return 0;
+}
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init am3517_evm_display_init(void)
+{
+ int r;
+
+ omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
+ /*
+ * Enable GPIO 182 = LCD Backlight Power
+ */
+ r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+ return;
+ }
+ gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
+ /*
+ * Enable GPIO 181 = LCD Panel PWM
+ */
+ r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_pwm\n");
+ goto err_1;
+ }
+ gpio_direction_output(LCD_PANEL_PWM, 1);
+ /*
+ * Enable GPIO 176 = LCD Panel Power enable pin
+ */
+ r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_pwr\n");
+ goto err_2;
+ }
+ gpio_direction_output(LCD_PANEL_PWR, 1);
+
+ printk(KERN_INFO "Display initialized successfully\n");
+ return;
+
+err_2:
+ gpio_free(LCD_PANEL_PWM);
+err_1:
+ gpio_free(LCD_PANEL_BKLIGHT_PWR);
+}
+
+static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(LCD_PANEL_PWR, 1);
+ lcd_enabled = 1;
+
+ return 0;
+}
+
+static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(LCD_PANEL_PWR, 0);
+ lcd_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_lcd_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "lcd",
+ .driver_name = "sharp_lq_panel",
+ .phy.dpi.data_lines = 16,
+ .platform_enable = am3517_evm_panel_enable_lcd,
+ .platform_disable = am3517_evm_panel_disable_lcd,
+};
+
+static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device am3517_evm_tv_device = {
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .name = "tv",
+ .driver_name = "venc",
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = am3517_evm_panel_enable_tv,
+ .platform_disable = am3517_evm_panel_disable_tv,
+};
+
+static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = am3517_evm_panel_enable_dvi,
+ .platform_disable = am3517_evm_panel_disable_dvi,
+};
+
+static struct omap_dss_device *am3517_evm_dss_devices[] = {
+ &am3517_evm_lcd_device,
+ &am3517_evm_tv_device,
+ &am3517_evm_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_evm_dss_data = {
+ .num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
+ .devices = am3517_evm_dss_devices,
+ .default_device = &am3517_evm_lcd_device,
+};
+
+struct platform_device am3517_evm_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &am3517_evm_dss_data,
+ },
+};
+
/*
* Board initialization
*/
@@ -39,6 +260,7 @@
};
static struct platform_device *am3517_evm_devices[] __initdata = {
+ &am3517_evm_dss_device,
};
static void __init am3517_evm_init_irq(void)
@@ -72,18 +294,31 @@
static void __init am3517_evm_init(void)
{
+ am3517_evm_i2c_init();
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
omap_serial_init();
+
+ /* Configure GPIO for EHCI port */
+ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
+ /* DSS */
+ am3517_evm_display_init();
+
+ /* RTC - S35390A */
+ am3517_evm_rtc_init();
+
+ i2c_register_board_info(1, am3517evm_i2c_boardinfo,
+ ARRAY_SIZE(am3517evm_i2c_boardinfo));
}
static void __init am3517_evm_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index fbbd68d..aa69fb9 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,7 +337,7 @@
static void __init omap_apollon_map_io(void)
{
omap2_set_globals_242x();
- omap2_map_common_io();
+ omap242x_map_common_io();
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 2626a9f..afa77ca 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -32,6 +32,9 @@
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -41,12 +44,13 @@
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include <mach/hardware.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define CM_T35_GPIO_PENDOWN 57
@@ -248,7 +252,6 @@
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/mcspi.h>
@@ -304,6 +307,193 @@
static inline void cm_t35_init_ads7846(void) {}
#endif
+#define CM_T35_LCD_EN_GPIO 157
+#define CM_T35_LCD_BL_GPIO 58
+#define CM_T35_DVI_EN_GPIO 54
+
+static int lcd_bl_gpio;
+static int lcd_en_gpio;
+static int dvi_en_gpio;
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(lcd_en_gpio, 1);
+ gpio_set_value(lcd_bl_gpio, 1);
+
+ lcd_enabled = 1;
+
+ return 0;
+}
+
+static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ lcd_enabled = 0;
+
+ gpio_set_value(lcd_bl_gpio, 0);
+ gpio_set_value(lcd_en_gpio, 0);
+}
+
+static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(dvi_en_gpio, 0);
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(dvi_en_gpio, 1);
+ dvi_enabled = 0;
+}
+
+static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device cm_t35_lcd_device = {
+ .name = "lcd",
+ .driver_name = "toppoly_tdo35s_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .platform_enable = cm_t35_panel_enable_lcd,
+ .platform_disable = cm_t35_panel_disable_lcd,
+};
+
+static struct omap_dss_device cm_t35_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = cm_t35_panel_enable_dvi,
+ .platform_disable = cm_t35_panel_disable_dvi,
+};
+
+static struct omap_dss_device cm_t35_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = cm_t35_panel_enable_tv,
+ .platform_disable = cm_t35_panel_disable_tv,
+};
+
+static struct omap_dss_device *cm_t35_dss_devices[] = {
+ &cm_t35_lcd_device,
+ &cm_t35_dvi_device,
+ &cm_t35_tv_device,
+};
+
+static struct omap_dss_board_info cm_t35_dss_data = {
+ .num_devices = ARRAY_SIZE(cm_t35_dss_devices),
+ .devices = cm_t35_dss_devices,
+ .default_device = &cm_t35_dvi_device,
+};
+
+static struct platform_device cm_t35_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_t35_dss_data,
+ },
+};
+
+static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct tdo24m_platform_data tdo24m_config = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 1000000,
+ .controller_data = &tdo24m_mcspi_config,
+ .platform_data = &tdo24m_config,
+ },
+};
+
+static void __init cm_t35_init_display(void)
+{
+ int err;
+
+ lcd_en_gpio = CM_T35_LCD_EN_GPIO;
+ lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
+ dvi_en_gpio = CM_T35_DVI_EN_GPIO;
+
+ spi_register_board_info(cm_t35_lcd_spi_board_info,
+ ARRAY_SIZE(cm_t35_lcd_spi_board_info));
+
+ err = gpio_request(lcd_en_gpio, "LCD RST");
+ if (err) {
+ pr_err("CM-T35: failed to get LCD reset GPIO\n");
+ goto out;
+ }
+
+ err = gpio_request(lcd_bl_gpio, "LCD BL");
+ if (err) {
+ pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
+ goto err_lcd_bl;
+ }
+
+ err = gpio_request(dvi_en_gpio, "DVI EN");
+ if (err) {
+ pr_err("CM-T35: failed to get DVI reset GPIO\n");
+ goto err_dvi_en;
+ }
+
+ gpio_export(lcd_en_gpio, 0);
+ gpio_export(lcd_bl_gpio, 0);
+ gpio_export(dvi_en_gpio, 0);
+ gpio_direction_output(lcd_en_gpio, 0);
+ gpio_direction_output(lcd_bl_gpio, 0);
+ gpio_direction_output(dvi_en_gpio, 1);
+
+ msleep(50);
+ gpio_set_value(lcd_en_gpio, 1);
+
+ err = platform_device_register(&cm_t35_dss_device);
+ if (err) {
+ pr_err("CM-T35: failed to register DSS device\n");
+ goto err_dev_reg;
+ }
+
+ return;
+
+err_dev_reg:
+ gpio_free(dvi_en_gpio);
+err_dvi_en:
+ gpio_free(lcd_bl_gpio);
+err_lcd_bl:
+ gpio_free(lcd_en_gpio);
+out:
+
+ return;
+}
+
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
.supply = "vmmc",
};
@@ -312,6 +502,16 @@
.supply = "vmmc_aux",
};
+static struct regulator_consumer_supply cm_t35_vdac_supply = {
+ .supply = "vdda_dac",
+ .dev = &cm_t35_dss_device.dev,
+};
+
+static struct regulator_consumer_supply cm_t35_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &cm_t35_dss_device.dev,
+};
+
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
.constraints = {
@@ -342,6 +542,35 @@
.consumer_supplies = &cm_t35_vsim_supply,
};
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data cm_t35_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cm_t35_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data cm_t35_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cm_t35_vdvi_supply,
+};
+
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -364,7 +593,7 @@
.rep = 1,
};
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -413,7 +642,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
cm_t35_vmmc1_supply.dev = mmc[0].dev;
@@ -445,6 +674,8 @@
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
+ .vdac = &cm_t35_vdac,
+ .vpll2 = &cm_t35_vpll2,
};
static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
@@ -479,7 +710,7 @@
static void __init cm_t35_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
static struct omap_board_mux board_mux[] __initdata = {
@@ -568,6 +799,11 @@
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ /* display controls */
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
/* TPS IRQ */
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
OMAP_PIN_INPUT_PULLUP),
@@ -575,6 +811,12 @@
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init cm_t35_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -584,8 +826,9 @@
cm_t35_init_ads7846();
cm_t35_init_ethernet();
cm_t35_init_led();
+ cm_t35_init_display();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
new file mode 100644
index 0000000..3710190
--- /dev/null
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -0,0 +1,697 @@
+/*
+ * board-devkit8000.c - TimLL Devkit8000
+ *
+ * Copyright (C) 2009 Kim Botherway
+ * Copyright (C) 2010 Thomas Weber
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/usb/otg.h>
+#include <linux/dm9000.h>
+#include <linux/interrupt.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+#include "mux.h"
+#include "hsmmc.h"
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+#define OMAP_DM9000_GPIO_IRQ 25
+#define OMAP3_DEVKIT_TS_GPIO 27
+
+static struct mtd_partition devkit8000_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data devkit8000_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = devkit8000_nand_partitions,
+ .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+};
+
+static struct resource devkit8000_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device devkit8000_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &devkit8000_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &devkit8000_nand_resource,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 8,
+ .gpio_wp = 29,
+ },
+ {} /* Terminator */
+};
+static struct omap_board_config_kernel devkit8000_config[] __initdata = {
+};
+
+static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
+ twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+
+ return 0;
+}
+
+static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+}
+static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+}
+
+static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+
+ return 0;
+}
+
+static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply devkit8000_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+
+static struct omap_dss_device devkit8000_lcd_device = {
+ .name = "lcd",
+ .driver_name = "innolux_at_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = devkit8000_panel_enable_lcd,
+ .platform_disable = devkit8000_panel_disable_lcd,
+};
+static struct omap_dss_device devkit8000_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = devkit8000_panel_enable_dvi,
+ .platform_disable = devkit8000_panel_disable_dvi,
+};
+
+static struct omap_dss_device devkit8000_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = devkit8000_panel_enable_tv,
+ .platform_disable = devkit8000_panel_disable_tv,
+};
+
+
+static struct omap_dss_device *devkit8000_dss_devices[] = {
+ &devkit8000_lcd_device,
+ &devkit8000_dvi_device,
+ &devkit8000_tv_device,
+};
+
+static struct omap_dss_board_info devkit8000_dss_data = {
+ .num_devices = ARRAY_SIZE(devkit8000_dss_devices),
+ .devices = devkit8000_dss_devices,
+ .default_device = &devkit8000_lcd_device,
+};
+
+static struct platform_device devkit8000_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &devkit8000_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &devkit8000_dss_device.dev,
+};
+
+static int board_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data devkit8000_kp_data = {
+ .keymap_data = &board_map_data,
+ .rows = 6,
+ .cols = 6,
+ .rep = 1,
+};
+
+static struct gpio_led gpio_leds[];
+
+static int devkit8000_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ omap2_hsmmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ devkit8000_vmmc1_supply.dev = mmc[0].dev;
+ devkit8000_vsim_supply.dev = mmc[0].dev;
+
+ /* REVISIT: need ehci-omap hooks for external VBUS
+ * power switch and overcurrent detect
+ */
+
+ gpio_request(gpio + 1, "EHCI_nOC");
+ gpio_direction_input(gpio + 1);
+
+ /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ | BIT(15) | BIT(16) | BIT(17),
+ .setup = devkit8000_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
+ {
+ .supply = "vdvi",
+ .dev = &devkit8000_lcd_device.dev,
+ },
+ {
+ .supply = "vdss_dsi",
+ .dev = &devkit8000_dss_device.dev,
+ }
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data devkit8000_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data devkit8000_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data devkit8000_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies),
+ .consumer_supplies = devkit8000_vpll2_supplies,
+};
+
+static struct twl4030_usb_data devkit8000_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data devkit8000_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data devkit8000_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &devkit8000_audio_data,
+};
+
+static struct twl4030_platform_data devkit8000_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &devkit8000_usb_data,
+ .gpio = &devkit8000_gpio_data,
+ .codec = &devkit8000_codec_data,
+ .vmmc1 = &devkit8000_vmmc1,
+ .vsim = &devkit8000_vsim,
+ .vdac = &devkit8000_vdac,
+ .vpll2 = &devkit8000_vpll2,
+ .keypad = &devkit8000_kp_data,
+};
+
+static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &devkit8000_twldata,
+ },
+};
+
+static int __init devkit8000_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
+ ARRAY_SIZE(devkit8000_i2c_boardinfo));
+ /* Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz */
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .gpio = 186,
+ .active_low = true,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "mmc0",
+ .gpio = 163,
+ .active_low = true,
+ },
+ {
+ .name = "ledB",
+ .default_trigger = "none",
+ .gpio = 153,
+ .active_low = true,
+ },
+ {
+ .name = "led3",
+ .default_trigger = "none",
+ .gpio = 164,
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 26,
+ .desc = "user",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+
+static void __init devkit8000_init_irq(void)
+{
+ omap_board_config = devkit8000_config;
+ omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+static void __init devkit8000_ads7846_init(void)
+{
+ int gpio = OMAP3_DEVKIT_TS_GPIO;
+ int ret;
+
+ ret = gpio_request(gpio, "ads7846_pen_down");
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to request GPIO %d for "
+ "ads7846 pen down IRQ\n", gpio);
+ return;
+ }
+
+ gpio_direction_input(gpio);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 5,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+#define OMAP_DM9000_BASE 0x2c000000
+
+static struct resource omap_dm9000_resources[] = {
+ [0] = {
+ .start = OMAP_DM9000_BASE,
+ .end = (OMAP_DM9000_BASE + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (OMAP_DM9000_BASE + 0x400),
+ .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct dm9000_plat_data omap_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device omap_dm9000_dev = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap_dm9000_resources),
+ .resource = omap_dm9000_resources,
+ .dev = {
+ .platform_data = &omap_dm9000_platdata,
+ },
+};
+
+static void __init omap_dm9000_init(void)
+{
+ if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
+ OMAP_DM9000_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+}
+
+static struct platform_device *devkit8000_devices[] __initdata = {
+ &devkit8000_dss_device,
+ &leds_gpio,
+ &keys_gpio,
+ &omap_dm9000_dev,
+};
+
+static void __init devkit8000_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ devkit8000_nand_data.cs = nandcs;
+ devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ devkit8000_nand_data.gpmc_baseaddr = (void *)
+ (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&devkit8000_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 147,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void __init devkit8000_init(void)
+{
+ devkit8000_i2c_init();
+ platform_add_devices(devkit8000_devices,
+ ARRAY_SIZE(devkit8000_devices));
+ omap_board_config = devkit8000_config;
+ omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+
+ spi_register_board_info(devkit8000_spi_board_info,
+ ARRAY_SIZE(devkit8000_spi_board_info));
+
+ omap_serial_init();
+
+ omap_dm9000_init();
+
+ devkit8000_ads7846_init();
+
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+
+ gpio_request(170, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(170, true);
+
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ devkit8000_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init devkit8000_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap34xx_map_common_io();
+}
+
+MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = devkit8000_map_io,
+ .init_irq = devkit8000_init_irq,
+ .init_machine = devkit8000_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 7e6e6ca..16cc068 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -50,7 +50,7 @@
static void __init omap_generic_map_io(void)
{
omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
- omap2_map_common_io();
+ omap242x_map_common_io();
}
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index cfb7f12..0665f2c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
@@ -29,7 +30,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <plat/control.h>
#include <mach/gpio.h>
@@ -115,8 +115,7 @@
}
};
-static struct flash_platform_data h4_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data h4_flash_data = {
.width = 2,
.parts = h4_partitions,
.nr_parts = ARRAY_SIZE(h4_partitions),
@@ -127,7 +126,7 @@
};
static struct platform_device h4_flash_device = {
- .name = "omapflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &h4_flash_data,
@@ -370,7 +369,7 @@
static void __init omap_h4_map_io(void)
{
omap2_set_globals_242x();
- omap2_map_common_io();
+ omap242x_map_common_io();
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 117b8fd..9958987 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
@@ -28,9 +29,12 @@
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/onenand.h>
#include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -38,6 +42,108 @@
#define IGEP2_GPIO_LED0_RED 26
#define IGEP2_GPIO_LED0_GREEN 27
#define IGEP2_GPIO_LED1_RED 28
+#define IGEP2_GPIO_DVI_PUP 170
+#define IGEP2_GPIO_WIFI_NPD 94
+#define IGEP2_GPIO_WIFI_NRESET 95
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP 0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep2_onenand_partitions[] = {
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 2 * (64*(2*2048))
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 6 * (64*(2*2048)),
+ },
+ {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64*(2*2048)),
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 12 * (64*(2*2048)),
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ /* nothing is required to be setup for onenand as of now */
+ return 0;
+}
+
+static struct omap_onenand_platform_data igep2_onenand_data = {
+ .parts = igep2_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
+ .onenand_setup = igep2_onenand_setup,
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep2_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &igep2_onenand_data,
+ },
+};
+
+void __init igep2_flash_init(void)
+{
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* Check if NAND/oneNAND is configured */
+ if ((ret & 0xC00) == 0x800)
+ /* NAND found */
+ pr_err("IGEP v2: Unsupported NAND found\n");
+ else {
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+ /* ONENAND found */
+ onenandcs = cs;
+ }
+ cs++;
+ }
+ if (onenandcs > GPMC_CS_NUM) {
+ pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+ return;
+ }
+
+ if (onenandcs < GPMC_CS_NUM) {
+ igep2_onenand_data.cs = onenandcs;
+ if (platform_device_register(&igep2_onenand_device) < 0)
+ pr_err("IGEP v2: Unable to register OneNAND device\n");
+ }
+}
+
+#else
+void __init igep2_flash_init(void) {}
+#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
@@ -106,6 +212,10 @@
.supply = "vmmc",
};
+static struct regulator_consumer_supply igep2_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
.constraints = {
@@ -121,7 +231,22 @@
.consumer_supplies = &igep2_vmmc1_supply,
};
-static struct twl4030_hsmmc_info mmc[] = {
+/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
+static struct regulator_init_data igep2_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vmmc2_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -142,12 +267,13 @@
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
igep2_vmmc1_supply.dev = mmc[0].dev;
+ igep2_vmmc2_supply.dev = mmc[1].dev;
return 0;
};
@@ -164,23 +290,130 @@
.usb_mode = T2_USB_MODE_ULPI,
};
+static int igep2_enable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
+
+ return 0;
+}
+
+static void igep2_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
+}
+
+static struct omap_dss_device igep2_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = igep2_enable_dvi,
+ .platform_disable = igep2_disable_dvi,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+ &igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+ .num_devices = ARRAY_SIZE(igep2_dss_devices),
+ .devices = igep2_dss_devices,
+ .default_device = &igep2_dvi_device,
+};
+
+static struct platform_device igep2_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &igep2_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply igep2_vpll2_supply = {
+ .supply = "vdds_dsi",
+ .dev = &igep2_dss_device.dev,
+};
+
+static struct regulator_init_data igep2_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vpll2_supply,
+};
+
+static void __init igep2_display_init(void)
+{
+ if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+ pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
+}
+#ifdef CONFIG_LEDS_TRIGGERS
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "GPIO_LED1_RED",
+ .default_trigger = "heartbeat",
+ .gpio = IGEP2_GPIO_LED1_RED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_leds_info,
+ },
+};
+#endif
+
+static struct platform_device *igep2_devices[] __initdata = {
+ &igep2_dss_device,
+#ifdef CONFIG_LEDS_TRIGGERS
+ &leds_gpio,
+#endif
+};
+
static void __init igep2_init_irq(void)
{
omap_board_config = igep2_config;
omap_board_config_size = ARRAY_SIZE(igep2_config);
- omap2_init_common_hw(NULL, NULL);
+ omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
+static struct twl4030_codec_audio_data igep2_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data igep2_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &igep2_audio_data,
+};
+
static struct twl4030_platform_data igep2_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &igep2_usb_data,
+ .codec = &igep2_codec_data,
.gpio = &igep2_gpio_data,
.vmmc1 = &igep2_vmmc1,
+ .vmmc2 = &igep2_vmmc2,
+ .vpll2 = &igep2_vpll2,
};
@@ -203,6 +436,23 @@
return 0;
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[2] = -EINVAL,
+};
+
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -215,9 +465,13 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
+ platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ igep2_flash_init();
+ igep2_display_init();
igep2_init_smsc911x();
/* GPIO userspace leds */
@@ -234,19 +488,36 @@
gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
+#ifndef CONFIG_LEDS_TRIGGERS
if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
(gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
gpio_export(IGEP2_GPIO_LED1_RED, 0);
gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+#endif
+ /* GPIO W-LAN + Bluetooth combo module */
+ if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+ (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
+ gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
+/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
+ } else
+ pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+ if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+ (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
+ gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
+ gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
+ udelay(10);
+ gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
+ } else
+ pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
}
static void __init igep2_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(IGEP0020, "IGEP v2 board")
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 995d4a2..5fcb52e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -44,7 +44,7 @@
#include <plat/usb.h>
#include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
@@ -359,7 +359,7 @@
return 0;
}
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
@@ -383,6 +383,12 @@
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -394,9 +400,9 @@
ARRAY_SIZE(ldp_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
ldp_vmmc1_supply.dev = mmc[0].dev;
}
@@ -404,7 +410,7 @@
static void __init omap_ldp_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 764ab1e..4cab052 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/stddef.h>
+#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
@@ -25,11 +26,17 @@
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
#include <plat/onenand.h>
+#include <plat/mmc.h>
#include <plat/serial.h>
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
+
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
@@ -96,10 +103,446 @@
#endif
+#if defined(CONFIG_MENELAUS) && \
+ (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+
+/*
+ * On both N800 and N810, only the first of the two MMC controllers is in use.
+ * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
+ * On N800, both slots are powered via Menelaus. On N810, only one of the
+ * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
+ *
+ * VMMC slot 1 on both N800 and N810
+ * VDCDC3_APE and VMCS2_APE slot 2 on N800
+ * GPIO23 and GPIO9 slot 2 EMMC on N810
+ *
+ */
+#define N8X0_SLOT_SWITCH_GPIO 96
+#define N810_EMMC_VSD_GPIO 23
+#define NN810_EMMC_VIO_GPIO 9
+
+static int n8x0_mmc_switch_slot(struct device *dev, int slot)
+{
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Choose slot %d\n", slot + 1);
+#endif
+ gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
+ return 0;
+}
+
+static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ int mV;
+
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+ power_on ? "on" : "off", vdd);
+#endif
+ if (slot == 0) {
+ if (!power_on)
+ return menelaus_set_vmmc(0);
+ switch (1 << vdd) {
+ case MMC_VDD_33_34:
+ case MMC_VDD_32_33:
+ case MMC_VDD_31_32:
+ mV = 3100;
+ break;
+ case MMC_VDD_30_31:
+ mV = 3000;
+ break;
+ case MMC_VDD_28_29:
+ mV = 2800;
+ break;
+ case MMC_VDD_165_195:
+ mV = 1850;
+ break;
+ default:
+ BUG();
+ }
+ return menelaus_set_vmmc(mV);
+ } else {
+ if (!power_on)
+ return menelaus_set_vdcdc(3, 0);
+ switch (1 << vdd) {
+ case MMC_VDD_33_34:
+ case MMC_VDD_32_33:
+ mV = 3300;
+ break;
+ case MMC_VDD_30_31:
+ case MMC_VDD_29_30:
+ mV = 3000;
+ break;
+ case MMC_VDD_28_29:
+ case MMC_VDD_27_28:
+ mV = 2800;
+ break;
+ case MMC_VDD_24_25:
+ case MMC_VDD_23_24:
+ mV = 2400;
+ break;
+ case MMC_VDD_22_23:
+ case MMC_VDD_21_22:
+ mV = 2200;
+ break;
+ case MMC_VDD_20_21:
+ mV = 2000;
+ break;
+ case MMC_VDD_165_195:
+ mV = 1800;
+ break;
+ default:
+ BUG();
+ }
+ return menelaus_set_vdcdc(3, mV);
+ }
+ return 0;
+}
+
+static void n810_set_power_emmc(struct device *dev,
+ int power_on)
+{
+ dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
+
+ if (power_on) {
+ gpio_set_value(N810_EMMC_VSD_GPIO, 1);
+ msleep(1);
+ gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+ msleep(1);
+ } else {
+ gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+ msleep(50);
+ gpio_set_value(N810_EMMC_VSD_GPIO, 0);
+ msleep(50);
+ }
+}
+
+static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ if (machine_is_nokia_n800() || slot == 0)
+ return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
+
+ n810_set_power_emmc(dev, power_on);
+
+ return 0;
+}
+
+static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+ int r;
+
+ dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
+ bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+ BUG_ON(slot != 0 && slot != 1);
+ slot++;
+ switch (bus_mode) {
+ case MMC_BUSMODE_OPENDRAIN:
+ r = menelaus_set_mmc_opendrain(slot, 1);
+ break;
+ case MMC_BUSMODE_PUSHPULL:
+ r = menelaus_set_mmc_opendrain(slot, 0);
+ break;
+ default:
+ BUG();
+ }
+ if (r != 0 && printk_ratelimit())
+ dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
+ slot);
+ return r;
+}
+
+static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
+{
+ slot++;
+ BUG_ON(slot != 1 && slot != 2);
+ if (slot == 1)
+ return slot1_cover_open;
+ else
+ return slot2_cover_open;
+}
+
+static void n8x0_mmc_callback(void *data, u8 card_mask)
+{
+ int bit, *openp, index;
+
+ if (machine_is_nokia_n800()) {
+ bit = 1 << 1;
+ openp = &slot2_cover_open;
+ index = 1;
+ } else {
+ bit = 1;
+ openp = &slot1_cover_open;
+ index = 0;
+ }
+
+ if (card_mask & bit)
+ *openp = 1;
+ else
+ *openp = 0;
+
+ omap_mmc_notify_cover_event(mmc_device, index, *openp);
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
+{
+ if (mmc_device == NULL)
+ return;
+
+ slot1_cover_open = !closed_state;
+ omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
+}
+
+static int n8x0_mmc_late_init(struct device *dev)
+{
+ int r, bit, *openp;
+ int vs2sel;
+
+ mmc_device = dev;
+
+ r = menelaus_set_slot_sel(1);
+ if (r < 0)
+ return r;
+
+ if (machine_is_nokia_n800())
+ vs2sel = 0;
+ else
+ vs2sel = 2;
+
+ r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
+ if (r < 0)
+ return r;
+
+ n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
+ n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
+
+ r = menelaus_set_mmc_slot(1, 1, 0, 1);
+ if (r < 0)
+ return r;
+ r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
+ if (r < 0)
+ return r;
+
+ r = menelaus_get_slot_pin_states();
+ if (r < 0)
+ return r;
+
+ if (machine_is_nokia_n800()) {
+ bit = 1 << 1;
+ openp = &slot2_cover_open;
+ } else {
+ bit = 1;
+ openp = &slot1_cover_open;
+ slot2_cover_open = 0;
+ }
+
+ /* All slot pin bits seem to be inversed until first switch change */
+ if (r == 0xf || r == (0xf & ~bit))
+ r = ~r;
+
+ if (r & bit)
+ *openp = 1;
+ else
+ *openp = 0;
+
+ r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
+
+ return r;
+}
+
+static void n8x0_mmc_shutdown(struct device *dev)
+{
+ int vs2sel;
+
+ if (machine_is_nokia_n800())
+ vs2sel = 0;
+ else
+ vs2sel = 2;
+
+ menelaus_set_mmc_slot(1, 0, 0, 0);
+ menelaus_set_mmc_slot(2, 0, vs2sel, 0);
+}
+
+static void n8x0_mmc_cleanup(struct device *dev)
+{
+ menelaus_unregister_mmc_callback();
+
+ gpio_free(N8X0_SLOT_SWITCH_GPIO);
+
+ if (machine_is_nokia_n810()) {
+ gpio_free(N810_EMMC_VSD_GPIO);
+ gpio_free(NN810_EMMC_VIO_GPIO);
+ }
+}
+
+/*
+ * MMC controller1 has two slots that are multiplexed via I2C.
+ * MMC controller2 is not in use.
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+ .nr_slots = 2,
+ .switch_slot = n8x0_mmc_switch_slot,
+ .init = n8x0_mmc_late_init,
+ .cleanup = n8x0_mmc_cleanup,
+ .shutdown = n8x0_mmc_shutdown,
+ .max_freq = 24000000,
+ .dma_mask = 0xffffffff,
+ .slots[0] = {
+ .wires = 4,
+ .set_power = n8x0_mmc_set_power,
+ .set_bus_mode = n8x0_mmc_set_bus_mode,
+ .get_cover_state = n8x0_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_165_195 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "internal",
+ },
+ .slots[1] = {
+ .set_power = n8x0_mmc_set_power,
+ .set_bus_mode = n8x0_mmc_set_bus_mode,
+ .get_cover_state = n8x0_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_165_195 | MMC_VDD_20_21 |
+ MMC_VDD_21_22 | MMC_VDD_22_23 |
+ MMC_VDD_23_24 | MMC_VDD_24_25 |
+ MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "external",
+ },
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
+
+void __init n8x0_mmc_init(void)
+
+{
+ int err;
+
+ if (machine_is_nokia_n810()) {
+ mmc1_data.slots[0].name = "external";
+
+ /*
+ * Some Samsung Movinand chips do not like open-ended
+ * multi-block reads and fall to braind-dead state
+ * while doing so. Reducing the number of blocks in
+ * the transfer or delays in clock disable do not help
+ */
+ mmc1_data.slots[1].name = "internal";
+ mmc1_data.slots[1].ban_openended = 1;
+ }
+
+ err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
+ if (err)
+ return err;
+
+ gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
+
+ if (machine_is_nokia_n810()) {
+ err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
+ if (err) {
+ gpio_free(N8X0_SLOT_SWITCH_GPIO);
+ return err;
+ }
+ gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
+
+ err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+ if (err) {
+ gpio_free(N8X0_SLOT_SWITCH_GPIO);
+ gpio_free(N810_EMMC_VSD_GPIO);
+ return err;
+ }
+ gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+ }
+
+ mmc_data[0] = &mmc1_data;
+ omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC);
+}
+#else
+
+void __init n8x0_mmc_init(void)
+{
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int state)
+{
+}
+
+#endif /* CONFIG_MMC_OMAP */
+
+#ifdef CONFIG_MENELAUS
+
+static int n8x0_auto_sleep_regulators(void)
+{
+ u32 val;
+ int ret;
+
+ val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
+ | EN_VAUX_SLEEP | EN_VIO_SLEEP \
+ | EN_VMEM_SLEEP | EN_DC3_SLEEP \
+ | EN_VC_SLEEP | EN_DC2_SLEEP;
+
+ ret = menelaus_set_regulator_sleep(1, val);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set regulators to sleep on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n8x0_auto_voltage_scale(void)
+{
+ int ret;
+
+ ret = menelaus_set_vcore_hw(1400, 1050);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set VCORE voltage on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n8x0_menelaus_late_init(struct device *dev)
+{
+ int ret;
+
+ ret = n8x0_auto_voltage_scale();
+ if (ret < 0)
+ return ret;
+ ret = n8x0_auto_sleep_regulators();
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
+ {
+ I2C_BOARD_INFO("menelaus", 0x72),
+ .irq = INT_24XX_SYS_NIRQ,
+ },
+};
+
+static struct menelaus_platform_data n8x0_menelaus_platform_data = {
+ .late_init = n8x0_menelaus_late_init,
+};
+
+static void __init n8x0_menelaus_init(void)
+{
+ n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
+ omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+ ARRAY_SIZE(n8x0_i2c_board_info_1));
+}
+
+#else
+static inline void __init n8x0_menelaus_init(void)
+{
+}
+#endif
+
static void __init n8x0_map_io(void)
{
omap2_set_globals_242x();
- omap2_map_common_io();
+ omap242x_map_common_io();
}
static void __init n8x0_init_irq(void)
@@ -116,7 +559,9 @@
ARRAY_SIZE(n800_spi_board_info));
omap_serial_init();
+ n8x0_menelaus_init();
n8x0_onenand_init();
+ n8x0_mmc_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 231cb4e..6eb77e1 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -45,7 +45,7 @@
#include <plat/timer-gp.h>
#include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
@@ -108,7 +108,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
@@ -147,7 +147,7 @@
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
beagle_vmmc1_supply.dev = mmc[0].dev;
@@ -430,6 +430,12 @@
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -443,7 +449,7 @@
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
@@ -455,7 +461,7 @@
static void __init omap3_beagle_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 34de178..d6bc88c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,10 +41,11 @@
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
+#include <plat/display.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -147,6 +148,187 @@
static inline void __init omap3evm_init_smsc911x(void) { return; }
#endif
+/*
+ * OMAP3EVM LCD Panel control signals
+ */
+#define OMAP3EVM_LCD_PANEL_LR 2
+#define OMAP3EVM_LCD_PANEL_UD 3
+#define OMAP3EVM_LCD_PANEL_INI 152
+#define OMAP3EVM_LCD_PANEL_ENVDD 153
+#define OMAP3EVM_LCD_PANEL_QVGA 154
+#define OMAP3EVM_LCD_PANEL_RESB 155
+#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
+#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_evm_display_init(void)
+{
+ int r;
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_resb\n");
+ return;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_ini\n");
+ goto err_1;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_qvga\n");
+ goto err_2;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_lr\n");
+ goto err_3;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_ud\n");
+ goto err_4;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_envdd\n");
+ goto err_5;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+ return;
+
+err_5:
+ gpio_free(OMAP3EVM_LCD_PANEL_UD);
+err_4:
+ gpio_free(OMAP3EVM_LCD_PANEL_LR);
+err_3:
+ gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
+err_2:
+ gpio_free(OMAP3EVM_LCD_PANEL_INI);
+err_1:
+ gpio_free(OMAP3EVM_LCD_PANEL_RESB);
+
+}
+
+static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+ else
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+
+ lcd_enabled = 1;
+ return 0;
+}
+
+static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+ else
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+
+ lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_lcd_device = {
+ .name = "lcd",
+ .driver_name = "sharp_ls_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .platform_enable = omap3_evm_enable_lcd,
+ .platform_disable = omap3_evm_disable_lcd,
+};
+
+static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_evm_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = omap3_evm_enable_tv,
+ .platform_disable = omap3_evm_disable_tv,
+};
+
+static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
+
+ dvi_enabled = 1;
+ return 0;
+}
+
+static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = omap3_evm_enable_dvi,
+ .platform_disable = omap3_evm_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_evm_dss_devices[] = {
+ &omap3_evm_lcd_device,
+ &omap3_evm_tv_device,
+ &omap3_evm_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_evm_dss_data = {
+ .num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
+ .devices = omap3_evm_dss_devices,
+ .default_device = &omap3_evm_lcd_device,
+};
+
+static struct platform_device omap3_evm_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3_evm_dss_data,
+ },
+};
+
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
.supply = "vmmc",
};
@@ -185,7 +367,7 @@
.consumer_supplies = &omap3evm_vsim_supply,
};
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -225,7 +407,7 @@
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3evm_vmmc1_supply.dev = mmc[0].dev;
@@ -236,6 +418,14 @@
* the P2 connector; notably LEDA for the LCD backlight.
*/
+ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* gpio + 7 == DVI Enable */
+ gpio_request(gpio + 7, "EN_DVI");
+ gpio_direction_output(gpio + 7, 0);
+
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -258,20 +448,23 @@
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(1, 0, KEY_DOWN),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_ENTER),
+ KEY(0, 3, KEY_M),
+
+ KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
+ KEY(1, 2, KEY_I),
+ KEY(1, 3, KEY_N),
+
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_E),
KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
+ KEY(2, 3, KEY_O),
+
+ KEY(3, 0, KEY_B),
+ KEY(3, 1, KEY_F),
+ KEY(3, 2, KEY_K),
KEY(3, 3, KEY_P)
};
@@ -300,6 +493,47 @@
.audio = &omap3evm_audio_data,
};
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &omap3_evm_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_evm_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_evm_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_evm_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_evm_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_evm_vpll2_supply,
+};
+
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -310,6 +544,8 @@
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
+ .vdac = &omap3_evm_vdac,
+ .vpll2 = &omap3_evm_vpll2,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -337,15 +573,6 @@
return 0;
}
-static struct platform_device omap3_evm_lcd_device = {
- .name = "omap3evm_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static void ads7846_dev_init(void)
{
if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
@@ -393,7 +620,6 @@
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static void __init omap3_evm_init_irq(void)
@@ -406,7 +632,7 @@
}
static struct platform_device *omap3_evm_devices[] __initdata = {
- &omap3_evm_lcd_device,
+ &omap3_evm_dss_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -424,12 +650,24 @@
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
@@ -443,10 +681,10 @@
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
-#endif
+
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
@@ -469,16 +707,17 @@
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
+ omap3_evm_display_init();
}
static void __init omap3_evm_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ef17cf1..4827f46 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,10 +40,11 @@
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define OMAP3_PANDORA_TS_GPIO 94
@@ -192,7 +193,41 @@
.rep = 1,
};
-static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
+static struct omap_dss_device pandora_lcd_device = {
+ .name = "lcd",
+ .driver_name = "tpo_td043mtea1_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .reset_gpio = 157,
+};
+
+static struct omap_dss_device pandora_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *pandora_dss_devices[] = {
+ &pandora_lcd_device,
+ &pandora_tv_device,
+};
+
+static struct omap_dss_board_info pandora_dss_data = {
+ .num_devices = ARRAY_SIZE(pandora_dss_devices),
+ .devices = pandora_dss_devices,
+ .default_device = &pandora_lcd_device,
+};
+
+static struct platform_device pandora_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_dss_data,
+ },
+};
+
+static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -217,25 +252,13 @@
{} /* Terminator */
};
-static struct regulator_consumer_supply pandora_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply = {
- .supply = "vmmc",
-};
-
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
omap3pandora_mmc[0].gpio_cd = gpio + 0;
omap3pandora_mmc[1].gpio_cd = gpio + 1;
- twl4030_mmc_init(omap3pandora_mmc);
-
- /* link regulators to MMC adapters */
- pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
- pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+ omap2_hsmmc_init(omap3pandora_mmc);
return 0;
}
@@ -247,6 +270,36 @@
.setup = omap3pandora_twl_gpio_setup,
};
+static struct regulator_consumer_supply pandora_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply pandora_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+ REGULATOR_SUPPLY("vcc", "display0");
+
+static struct regulator_consumer_supply pandora_usb_phy_supply =
+ REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+
+/* ads7846 on SPI and 2 nub controllers on I2C */
+static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+ REGULATOR_SUPPLY("vcc", "3-0066"),
+ REGULATOR_SUPPLY("vcc", "3-0067"),
+};
+
+static struct regulator_consumer_supply pandora_adac_supply =
+ REGULATOR_SUPPLY("vcc", "soc-audio");
+
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
.constraints = {
@@ -277,6 +330,96 @@
.consumer_supplies = &pandora_vmmc2_supply,
};
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data pandora_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data pandora_vpll2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
+ .consumer_supplies = pandora_vdds_supplies,
+};
+
+/* VAUX1 for LCD */
+static struct regulator_init_data pandora_vaux1 = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vcc_lcd_supply,
+};
+
+/* VAUX2 for USB host PHY */
+static struct regulator_init_data pandora_vaux2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_usb_phy_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data pandora_vaux4 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies),
+ .consumer_supplies = pandora_vaux4_supplies,
+};
+
+/* VSIM for audio DAC */
+static struct regulator_init_data pandora_vsim = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_adac_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -298,6 +441,12 @@
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
+ .vdac = &pandora_vdac,
+ .vpll2 = &pandora_vpll2,
+ .vaux1 = &pandora_vaux1,
+ .vaux2 = &pandora_vaux2,
+ .vaux4 = &pandora_vaux4,
+ .vsim = &pandora_vsim,
.keypad = &pandora_kp_data,
};
@@ -365,6 +514,12 @@
.controller_data = &ads7846_mcspi_config,
.irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
.platform_data = &ads7846_config,
+ }, {
+ .modalias = "tpo_td043mtea1_panel_spi",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 375000,
+ .platform_data = &pandora_lcd_device,
}
};
@@ -379,6 +534,7 @@
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
+ &pandora_dss_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -401,6 +557,12 @@
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -413,7 +575,7 @@
omap3pandora_ads7846_init();
usb_ehci_init(&ehci_pdata);
pandora_keys_gpio_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -423,7 +585,7 @@
static void __init omap3pandora_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index fe3d22c..3943d0f 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -50,7 +50,7 @@
#include <plat/timer-gp.h>
#include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#include <asm/setup.h>
@@ -122,7 +122,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
@@ -161,7 +161,7 @@
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
touchbook_vmmc1_supply.dev = mmc[0].dev;
@@ -527,6 +527,12 @@
}
__early_param("tbr=", early_touchbook_revision);
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_touchbook_init(void)
{
pm_power_off = omap3_touchbook_poweroff;
@@ -545,7 +551,7 @@
spi_register_board_info(omap3_ads7846_spi_board_info,
ARRAY_SIZE(omap3_ads7846_spi_board_info));
omap3_ads7846_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3touchbook_flash_init();
@@ -557,7 +563,7 @@
static void __init omap3_touchbook_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d192dd9..50872a4 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -48,7 +48,7 @@
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
@@ -272,7 +272,7 @@
}
}
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -297,7 +297,7 @@
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
overo_vmmc1_supply.dev = mmc[0].dev;
@@ -413,6 +413,12 @@
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init overo_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -420,7 +426,7 @@
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
overo_flash_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
@@ -469,7 +475,7 @@
static void __init overo_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OVERO, "Gumstix Overo")
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acafdbc..4377a4c 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -34,7 +34,7 @@
#include <plat/gpmc-smc91x.h>
#include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -209,7 +209,47 @@
.irq_line = 1,
};
-static struct twl4030_hsmmc_info mmc[] = {
+/* Enable input logic and pull all lines up when eMMC is on. */
+static struct omap_board_mux rx51_mmc2_on_mux[] = {
+ OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/* Disable input logic and pull all lines down when eMMC is off. */
+static struct omap_board_mux rx51_mmc2_off_mux[] = {
+ OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Current flows to eMMC when eMMC is off and the data lines are pulled up,
+ * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
+ */
+static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+{
+ if (power_on)
+ omap_mux_write_array(rx51_mmc2_on_mux);
+ else
+ omap_mux_write_array(rx51_mmc2_off_mux);
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
@@ -222,25 +262,29 @@
{
.name = "internal",
.mmc = 2,
- .wires = 8,
+ .wires = 8, /* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
+ .remux = rx51_mmc2_remux,
},
{} /* Terminator */
};
static struct regulator_consumer_supply rx51_vmmc1_supply = {
- .supply = "vmmc",
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.0",
};
static struct regulator_consumer_supply rx51_vmmc2_supply = {
- .supply = "vmmc",
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.1",
};
static struct regulator_consumer_supply rx51_vsim_supply = {
- .supply = "vmmc_aux",
+ .supply = "vmmc_aux",
+ .dev_name = "mmci-omap-hs.1",
};
static struct regulator_init_data rx51_vaux1 = {
@@ -375,12 +419,6 @@
gpio_request(gpio + 7, "speaker_en");
gpio_direction_output(gpio + 7, 1);
- /* set up MMC adapters, linking their regulators to them */
- twl4030_mmc_init(mmc);
- rx51_vmmc1_supply.dev = mmc[0].dev;
- rx51_vmmc2_supply.dev = mmc[1].dev;
- rx51_vsim_supply.dev = mmc[1].dev;
-
return 0;
}
@@ -751,5 +789,6 @@
rx51_init_wl1251();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
+ omap2_hsmmc_init(mmc);
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 67bb347..b155c36 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -30,9 +31,49 @@
#include <plat/usb.h>
#include "mux.h"
+#include "pm.h"
+
+#define RX51_GPIO_SLEEP_IND 162
struct omap_sdrc_params *rx51_get_sdram_timings(void);
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "sleep_ind",
+ .gpio = RX51_GPIO_SLEEP_IND,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct cpuidle_params rx51_cpuidle_params[] = {
+ /* C1 */
+ {1, 110, 162, 5},
+ /* C2 */
+ {1, 106, 180, 309},
+ /* C3 */
+ {0, 107, 410, 46057},
+ /* C4 */
+ {0, 121, 3374, 46057},
+ /* C5 */
+ {1, 855, 1146, 46057},
+ /* C6 */
+ {0, 7580, 4134, 484329},
+ /* C7 */
+ {1, 7505, 15274, 484329},
+};
+
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
@@ -62,6 +103,7 @@
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
+ omap3_pm_init_cpuidle(rx51_cpuidle_params);
sdrc_params = rx51_get_sdram_timings();
omap2_init_common_hw(sdrc_params, sdrc_params);
omap_init_irq();
@@ -78,22 +120,30 @@
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_PERIPHERAL,
+ .power = 0,
+};
+
static void __init rx51_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+ platform_device_register(&leds_gpio);
}
static void __init rx51_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
new file mode 100644
index 0000000..b1b88de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-sdp-flash.c
@@ -0,0 +1,272 @@
+/*
+ * board-sdp-flash.c
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/onenand.h>
+#include <plat/tc.h>
+#include <mach/board-sdp.h>
+
+#define REG_FPGA_REV 0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
+#define MAX_SUPPORTED_GPMC_CONFIG 3
+
+#define DEBUG_BASE 0x08000000 /* debug board */
+
+#define PDC_NOR 1
+#define PDC_NAND 2
+#define PDC_ONENAND 3
+#define DBG_MPDB 4
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */
+#define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */
+
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ *
+ * REVISIT: Add support for 2430 SDP
+ */
+static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
+ {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+ {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+ {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct physmap_flash_data sdp_nor_data = {
+ .width = 2,
+};
+
+static struct resource sdp_nor_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp_nor_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp_nor_resource,
+};
+
+static void
+__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
+{
+ int err;
+
+ sdp_nor_data.parts = sdp_nor_parts.parts;
+ sdp_nor_data.nr_parts = sdp_nor_parts.nr_parts;
+
+ /* Configure start address and size of NOR device */
+ if (omap_rev() >= OMAP3430_REV_ES1_0) {
+ err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
+ (unsigned long *)&sdp_nor_resource.start);
+ sdp_nor_resource.end = sdp_nor_resource.start
+ + FLASH_SIZE_SDPV2 - 1;
+ } else {
+ err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
+ (unsigned long *)&sdp_nor_resource.start);
+ sdp_nor_resource.end = sdp_nor_resource.start
+ + FLASH_SIZE_SDPV1 - 1;
+ }
+ if (err < 0) {
+ printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+ return;
+ }
+ if (platform_device_register(&sdp_nor_device) < 0)
+ printk(KERN_ERR "Unable to register NOR device\n");
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data = {
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+ board_onenand_data.cs = cs;
+ board_onenand_data.parts = sdp_onenand_parts.parts;
+ board_onenand_data.nr_parts = sdp_onenand_parts.nr_parts;
+
+ gpmc_onenand_init(&board_onenand_data);
+}
+#else
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+/* Note that all values in this struct are in nanoseconds */
+static struct gpmc_timings nand_timings = {
+
+ .sync_clk = 0,
+
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
+
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
+
+ .we_off = 30,
+ .oe_off = 48,
+
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
+
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+};
+
+static struct omap_nand_platform_data sdp_nand_data = {
+ .nand_setup = NULL,
+ .gpmc_t = &nand_timings,
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .dev_ready = NULL,
+ .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
+};
+
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+ sdp_nand_data.cs = cs;
+ sdp_nand_data.parts = sdp_nand_parts.parts;
+ sdp_nand_data.nr_parts = sdp_nand_parts.nr_parts;
+
+ sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
+ GPMC_CS0_BASE +
+ cs * GPMC_CS_SIZE);
+ sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
+
+ gpmc_nand_init(&sdp_nand_data);
+}
+#else
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+ u8 cs = 0;
+ void __iomem *fpga_map_addr;
+
+ fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+ if (!fpga_map_addr)
+ return -ENOMEM;
+
+ if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+ /* we dont have an DEBUG FPGA??? */
+ /* Depend on #defines!! default to strata boot return param */
+ goto unmap;
+
+ /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+ cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+
+ /* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+ if (omap_rev() >= OMAP3430_REV_ES1_0)
+ /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+ cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+ ((cs & 2) << 1) | ((cs & 1) << 3);
+ else
+ /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+ cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+unmap:
+ iounmap(fpga_map_addr);
+ return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
+{
+ u8 cs = 0;
+ u8 norcs = GPMC_CS_NUM + 1;
+ u8 nandcs = GPMC_CS_NUM + 1;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+ u8 idx;
+ unsigned char *config_sel = NULL;
+
+ /* REVISIT: Is this return correct idx for 2430 SDP?
+ * for which cs configuration matches for 2430 SDP?
+ */
+ idx = get_gpmc0_type();
+ if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+ printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+ return;
+ }
+ config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+
+ while (cs < GPMC_CS_NUM) {
+ switch (config_sel[cs]) {
+ case PDC_NOR:
+ if (norcs > GPMC_CS_NUM)
+ norcs = cs;
+ break;
+ case PDC_NAND:
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ break;
+ case PDC_ONENAND:
+ if (onenandcs > GPMC_CS_NUM)
+ onenandcs = cs;
+ break;
+ };
+ cs++;
+ }
+
+ if (norcs > GPMC_CS_NUM)
+ printk(KERN_INFO "OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ else
+ board_nor_init(sdp_partition_info[0], norcs);
+
+ if (onenandcs > GPMC_CS_NUM)
+ printk(KERN_INFO "OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ else
+ board_onenand_init(sdp_partition_info[1], onenandcs);
+
+ if (nandcs > GPMC_CS_NUM)
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ " in GPMC\n ");
+ else
+ board_nand_init(sdp_partition_info[2], nandcs);
+}
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 1e3dfb6..ca95d8d 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -24,7 +24,8 @@
#include <plat/common.h>
#include <plat/usb.h>
-#include "mmc-twl4030.h"
+#include "mux.h"
+#include "hsmmc.h"
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
@@ -150,7 +151,7 @@
.consumer_supplies = &zoom_vsim_supply,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
@@ -175,7 +176,7 @@
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
@@ -263,9 +264,23 @@
return 0;
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static void enable_board_wakeup_source(void)
+{
+ /* T2 interrupt line (keypad) */
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}
+
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
+ enable_board_wakeup_source();
}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index bb87cf7..9a26f84 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -87,7 +87,7 @@
static void __init omap_zoom2_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index a9fe918..d3e3cd5 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -20,14 +20,15 @@
#include <plat/common.h>
#include <plat/board.h>
+#include <plat/usb.h>
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
static void __init omap_zoom_map_io(void)
{
- omap2_set_globals_343x();
- omap2_map_common_io();
+ omap2_set_globals_36xx();
+ omap34xx_map_common_io();
}
static struct omap_board_config_kernel zoom_config[] __initdata = {
@@ -51,11 +52,24 @@
#define board_mux NULL
#endif
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 64,
+ .reset_gpio_port[2] = -EINVAL,
+};
+
static void __init omap_zoom_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
zoom_debugboard_init();
+
+ omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
+ usb_ehci_init(&ehci_pdata);
}
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
new file mode 100644
index 0000000..43d7246
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -0,0 +1,122 @@
+/*
+ * OMAP2xxx APLL clock control functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/prcm.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED 0
+#define EN_APLL_LOCKED 3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ 0
+#define APLLS_CLKIN_13MHZ 2
+#define APLLS_CLKIN_12MHZ 3
+
+void __iomem *cm_idlest_pll;
+
+/* Private functions */
+
+/* Enable an APLL if off */
+static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+{
+ u32 cval, apll_mask;
+
+ apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+ cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+ if ((cval & apll_mask) == apll_mask)
+ return 0; /* apll already enabled */
+
+ cval &= ~apll_mask;
+ cval |= apll_mask;
+ cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+ omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
+ OMAP24XX_CM_IDLEST_VAL, clk->name);
+
+ /*
+ * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+ * fails?
+ */
+ return 0;
+}
+
+static int omap2_clk_apll96_enable(struct clk *clk)
+{
+ return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+}
+
+static int omap2_clk_apll54_enable(struct clk *clk)
+{
+ return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+}
+
+/* Stop APLL */
+static void omap2_clk_apll_disable(struct clk *clk)
+{
+ u32 cval;
+
+ cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+ cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/* Public data */
+
+const struct clkops clkops_apll96 = {
+ .enable = omap2_clk_apll96_enable,
+ .disable = omap2_clk_apll_disable,
+};
+
+const struct clkops clkops_apll54 = {
+ .enable = omap2_clk_apll54_enable,
+ .disable = omap2_clk_apll_disable,
+};
+
+/* Public functions */
+
+u32 omap2xxx_get_apll_clkin(void)
+{
+ u32 aplls, srate = 0;
+
+ aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+ aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+ aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+ if (aplls == APLLS_CLKIN_19_2MHZ)
+ srate = 19200000;
+ else if (aplls == APLLS_CLKIN_13MHZ)
+ srate = 13000000;
+ else if (aplls == APLLS_CLKIN_12MHZ)
+ srate = 12000000;
+
+ return srate;
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
new file mode 100644
index 0000000..01904843
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -0,0 +1,173 @@
+/*
+ * DPLL + CORE_CLK composite clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX The DPLL and CORE clocks should be split into two separate clock
+ * types.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
+
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual). This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+{
+ long long core_clk;
+ u32 v;
+
+ core_clk = omap2_get_dpll_rate(clk);
+
+ v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+ if (v == CORE_CLK_SRC_32K)
+ core_clk = 32768;
+ else
+ core_clk *= v;
+
+ return core_clk;
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
+{
+ u32 high, low, core_clk_src;
+
+ core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+ if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
+ high = curr_prcm_set->dpll_speed * 2;
+ low = curr_prcm_set->dpll_speed;
+ } else { /* DPLL clockout x 2 */
+ high = curr_prcm_set->dpll_speed;
+ low = curr_prcm_set->dpll_speed / 2;
+ }
+
+#ifdef DOWN_VARIABLE_DPLL
+ if (target_rate > high)
+ return high;
+ else
+ return target_rate;
+#else
+ if (target_rate > low)
+ return high;
+ else
+ return low;
+#endif
+
+}
+
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
+{
+ return omap2xxx_clk_get_core_rate(clk);
+}
+
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+{
+ u32 cur_rate, low, mult, div, valid_rate, done_rate;
+ u32 bypass = 0;
+ struct prcm_config tmpset;
+ const struct dpll_data *dd;
+
+ cur_rate = omap2xxx_clk_get_core_rate(dclk);
+ mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+ if ((rate == (cur_rate / 2)) && (mult == 2)) {
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+ } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+ } else if (rate != cur_rate) {
+ valid_rate = omap2_dpllcore_round_rate(rate);
+ if (valid_rate != rate)
+ return -EINVAL;
+
+ if (mult == 1)
+ low = curr_prcm_set->dpll_speed;
+ else
+ low = curr_prcm_set->dpll_speed / 2;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+ tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+ dd->div1_mask);
+ div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+ tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+ if (rate > low) {
+ tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+ mult = ((rate / 2) / 1000000);
+ done_rate = CORE_CLK_SRC_DPLL_X2;
+ } else {
+ tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+ mult = (rate / 1000000);
+ done_rate = CORE_CLK_SRC_DPLL;
+ }
+ tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+ tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+ /* Worst case */
+ tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+ if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
+ bypass = 1;
+
+ /* For omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+ /* Force dll lock mode */
+ omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+ bypass);
+
+ /* Errata: ret dll entry state */
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
+ }
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
new file mode 100644
index 0000000..2167be8
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -0,0 +1,62 @@
+/*
+ * OMAP2xxx osc_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+ u32 pcc;
+
+ pcc = __raw_readl(prcm_clksrc_ctrl);
+
+ __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+ return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+ u32 pcc;
+
+ pcc = __raw_readl(prcm_clksrc_ctrl);
+
+ __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+ .enable = omap2_enable_osc_ck,
+ .disable = omap2_disable_osc_ck,
+};
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+ return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
new file mode 100644
index 0000000..822b5a7
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -0,0 +1,50 @@
+/*
+ * OMAP2xxx sys_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+void __iomem *prcm_clksrc_ctrl;
+
+u32 omap2xxx_get_sysclkdiv(void)
+{
+ u32 div;
+
+ div = __raw_readl(prcm_clksrc_ctrl);
+ div &= OMAP_SYSCLKDIV_MASK;
+ div >>= OMAP_SYSCLKDIV_SHIFT;
+
+ return div;
+}
+
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
+{
+ return clk->parent->rate / omap2xxx_get_sysclkdiv();
+}
+
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
new file mode 100644
index 0000000..3b1eac4
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -0,0 +1,254 @@
+/*
+ * OMAP2xxx DVFS virtual clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of this code should be replaceable by the upcoming OPP layer
+ * code. However, some notion of "rate set" is probably still necessary
+ * for OMAP2xxx at least. Rate sets should be generalized so they can be
+ * used for any OMAP chip, not just OMAP2xxx. In particular, Richard Woodruff
+ * has in the past expressed a preference to use rate sets for OPP changes,
+ * rather than dynamically recalculating the clock tree, so if someone wants
+ * this badly enough to write the code to handle it, we should support it
+ * as an option.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
+{
+ return curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+ const struct prcm_config *ptr;
+ long highest_rate;
+ long sys_ck_rate;
+
+ sys_ck_rate = clk_get_rate(sclk);
+
+ highest_rate = -EINVAL;
+
+ for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+ if (!(ptr->flags & cpu_mask))
+ continue;
+ if (ptr->xtal_speed != sys_ck_rate)
+ continue;
+
+ highest_rate = ptr->mpu_speed;
+
+ /* Can check only after xtal frequency check */
+ if (ptr->mpu_speed <= rate)
+ break;
+ }
+ return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+ u32 cur_rate, done_rate, bypass = 0, tmp;
+ const struct prcm_config *prcm;
+ unsigned long found_speed = 0;
+ unsigned long flags;
+ long sys_ck_rate;
+
+ sys_ck_rate = clk_get_rate(sclk);
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ if (prcm->mpu_speed <= rate) {
+ found_speed = prcm->mpu_speed;
+ break;
+ }
+ }
+
+ if (!found_speed) {
+ printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+ rate / 1000000);
+ return -EINVAL;
+ }
+
+ curr_prcm_set = prcm;
+ cur_rate = omap2xxx_clk_get_core_rate(dclk);
+
+ if (prcm->dpll_speed == cur_rate / 2) {
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+ } else if (prcm->dpll_speed == cur_rate * 2) {
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+ } else if (prcm->dpll_speed != cur_rate) {
+ local_irq_save(flags);
+
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ bypass = 1;
+
+ if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+ CORE_CLK_SRC_DPLL_X2)
+ done_rate = CORE_CLK_SRC_DPLL_X2;
+ else
+ done_rate = CORE_CLK_SRC_DPLL;
+
+ /* MPU divider */
+ cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+ /* dsp + iva1 div(2420), iva2.1(2430) */
+ cm_write_mod_reg(prcm->cm_clksel_dsp,
+ OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+ cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+ /* Major subsystem dividers */
+ tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+ cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+ CM_CLKSEL1);
+
+ if (cpu_is_omap2430())
+ cm_write_mod_reg(prcm->cm_clksel_mdm,
+ OMAP2430_MDM_MOD, CM_CLKSEL);
+
+ /* x2 to enter omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+ omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+ bypass);
+
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
+
+ local_irq_restore(flags);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
+ */
+static struct cpufreq_frequency_table *freq_table;
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ const struct prcm_config *prcm;
+ long sys_ck_rate;
+ int i = 0;
+ int tbl_sz = 0;
+
+ if (!cpu_is_omap24xx())
+ return;
+
+ sys_ck_rate = clk_get_rate(sclk);
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ tbl_sz++;
+ }
+
+ /*
+ * XXX Ensure that we're doing what CPUFreq expects for this error
+ * case and the following one
+ */
+ if (tbl_sz == 0) {
+ pr_warning("%s: no matching entries in rate_table\n",
+ __func__);
+ return;
+ }
+
+ /* Include the CPUFREQ_TABLE_END terminator entry */
+ tbl_sz++;
+
+ freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+ GFP_ATOMIC);
+ if (!freq_table) {
+ pr_err("%s: could not kzalloc frequency table\n", __func__);
+ return;
+ }
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ kfree(freq_table);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
new file mode 100644
index 0000000..b2b1e37
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -0,0 +1,121 @@
+/*
+ * OMAP34xx M2 divider clock code
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "clock34xx.h"
+#include "sdrc.h"
+
+#define CYCLES_PER_MHZ 1000000
+
+/*
+ * CORE DPLL (DPLL3) M2 divider rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate. Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 new_div = 0;
+ u32 unlock_dll = 0;
+ u32 c;
+ unsigned long validrate, sdrcrate, _mpurate;
+ struct omap_sdrc_params *sdrc_cs0;
+ struct omap_sdrc_params *sdrc_cs1;
+ int ret;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
+
+ sdrcrate = sdrc_ick_p->rate;
+ if (rate > clk->rate)
+ sdrcrate <<= ((rate / clk->rate) >> 1);
+ else
+ sdrcrate >>= ((clk->rate / rate) >> 1);
+
+ ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+ if (ret)
+ return -EINVAL;
+
+ if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+ pr_debug("clock: will unlock SDRC DLL\n");
+ unlock_dll = 1;
+ }
+
+ /*
+ * XXX This only needs to be done when the CPU frequency changes
+ */
+ _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+ c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+ c += 1; /* for safety */
+ c *= SDRC_MPURATE_LOOPS;
+ c >>= SDRC_MPURATE_SCALE;
+ if (c == 0)
+ c = 1;
+
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_debug("clock: SDRC CS0 timing params used:"
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+ if (sdrc_cs1)
+ pr_debug("clock: SDRC CS1 timing params used: "
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+ if (sdrc_cs1)
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ else
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ 0, 0, 0, 0);
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
new file mode 100644
index 0000000..e50812d
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -0,0 +1,409 @@
+/*
+ * clkt_clksel.c - OMAP2/3/4 clksel clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX At some point these clksel clocks should be split into
+ * "divider" clocks and "mux" clocks to better match the hardware.
+ *
+ * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
+ * many of the OMAP1 clocks should be convertible to use this
+ * mechanism.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* Private functions */
+
+/**
+ * _omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
+ */
+static const struct clksel *_omap2_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
+{
+ const struct clksel *clks;
+
+ if (!clk->clksel)
+ return NULL;
+
+ for (clks = clk->clksel; clks->parent; clks++) {
+ if (clks->parent == src_clk)
+ break; /* Found the requested parent */
+ }
+
+ if (!clks->parent) {
+ printk(KERN_ERR "clock: Could not find parent clock %s in "
+ "clksel array of clock %s\n", src_clk->name,
+ clk->name);
+ return NULL;
+ }
+
+ return clks;
+}
+
+/*
+ * Converts encoded control register address into a full address
+ * On error, the return value (parent_div) will be 0.
+ */
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+ u32 *field_val)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ clks = _omap2_get_clksel_by_parent(clk, src_clk);
+ if (!clks)
+ return 0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
+ break; /* Found the default rate for this platform */
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find default rate for "
+ "clock %s parent %s\n", clk->name,
+ src_clk->parent->name);
+ return 0;
+ }
+
+ /* Should never happen. Add a clksel mask to the struct clk. */
+ WARN_ON(clk->clksel_mask == 0);
+
+ *field_val = clkr->val;
+
+ return clkr->div;
+}
+
+
+/* Public functions */
+
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to. Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+ u32 r, found = 0;
+
+ if (!clk->clksel)
+ return;
+
+ r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ r >>= __ffs(clk->clksel_mask);
+
+ for (clks = clk->clksel; clks->parent && !found; clks++) {
+ for (clkr = clks->rates; clkr->div && !found; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+ if (clk->parent != clks->parent) {
+ pr_debug("clock: inited %s parent "
+ "to %s (was %s)\n",
+ clk->name, clks->parent->name,
+ ((clk->parent) ?
+ clk->parent->name : "NULL"));
+ clk_reparent(clk, clks->parent);
+ };
+ found = 1;
+ }
+ }
+ }
+
+ if (!found)
+ printk(KERN_ERR "clock: init parent: could not find "
+ "regval %0x for clock %s\n", r, clk->name);
+
+ return;
+}
+
+/*
+ * Used for clocks that are part of CLKSEL_xyz governed clocks.
+ * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+ */
+unsigned long omap2_clksel_recalc(struct clk *clk)
+{
+ unsigned long rate;
+ u32 div = 0;
+
+ pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
+
+ div = omap2_clksel_get_divisor(clk);
+ if (div == 0)
+ return clk->rate;
+
+ rate = clk->parent->rate / div;
+
+ pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
+
+ return rate;
+}
+
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
+ *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+ u32 *new_div)
+{
+ unsigned long test_rate;
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+ u32 last_div = 0;
+
+ pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
+
+ *new_div = 1;
+
+ clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+ if (!clks)
+ return ~0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (!(clkr->flags & cpu_mask))
+ continue;
+
+ /* Sanity check */
+ if (clkr->div <= last_div)
+ pr_err("clock: clksel_rate table not sorted "
+ "for clock %s", clk->name);
+
+ last_div = clkr->div;
+
+ test_rate = clk->parent->rate / clkr->div;
+
+ if (test_rate <= target_rate)
+ break; /* found it */
+ }
+
+ if (!clkr->div) {
+ pr_err("clock: Could not find divisor for target "
+ "rate %ld for clock %s parent %s\n", target_rate,
+ clk->name, clk->parent->name);
+ return ~0;
+ }
+
+ *new_div = clkr->div;
+
+ pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
+
+ return clk->parent->rate / clkr->div;
+}
+
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ u32 new_div;
+
+ return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
+
+
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->round_rate)
+ return clk->round_rate(clk, rate);
+
+ return clk->rate;
+}
+
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor. The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling. Returns 0 on error
+ */
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+ if (!clks)
+ return 0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
+ break;
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find fieldval %d for "
+ "clock %s parent %s\n", field_val, clk->name,
+ clk->parent->name);
+ return 0;
+ }
+
+ return clkr->div;
+}
+
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value. The return register value is
+ * the value before left-shifting. Returns ~0 on error
+ */
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ /* should never happen */
+ WARN_ON(div == 0);
+
+ clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+ if (!clks)
+ return ~0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->div == div))
+ break;
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find divisor %d for "
+ "clock %s parent %s\n", div, clk->name,
+ clk->parent->name);
+ return ~0;
+ }
+
+ return clkr->val;
+}
+
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
+ */
+u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+ u32 v;
+
+ if (!clk->clksel_mask)
+ return 0;
+
+ v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ v >>= __ffs(clk->clksel_mask);
+
+ return omap2_clksel_to_divisor(clk, v);
+}
+
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 v, field_val, validrate, new_div = 0;
+
+ if (!clk->clksel_mask)
+ return -EINVAL;
+
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
+
+ field_val = omap2_divisor_to_clksel(clk, new_div);
+ if (field_val == ~0)
+ return -EINVAL;
+
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+
+ clk->rate = clk->parent->rate / new_div;
+
+ return 0;
+}
+
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
+{
+ u32 field_val, v, parent_div;
+
+ if (!clk->clksel)
+ return -EINVAL;
+
+ parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+ if (!parent_div)
+ return -EINVAL;
+
+ /* Set new source value (previous dividers if any in effect) */
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+
+ clk_reparent(clk, new_parent);
+
+ /* CLKSEL clocks follow their parents' rates, divided by a divisor */
+ clk->rate = new_parent->rate;
+
+ if (parent_div > 0)
+ clk->rate /= parent_div;
+
+ pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+ clk->name, clk->parent->name, clk->rate);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
new file mode 100644
index 0000000..6ce512e
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -0,0 +1,386 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN 750000
+#define DPLL_FINT_BAND1_MAX 2100000
+#define DPLL_FINT_BAND2_MIN 7500000
+#define DPLL_FINT_BAND2_MAX 21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+ struct dpll_data *dd;
+ long fint;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = clk->parent->rate / (n + 1);
+ if (fint < DPLL_FINT_BAND1_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "lowering max_divider\n", n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+
+ } else if (fint > DPLL_FINT_BAND1_MAX &&
+ fint < DPLL_FINT_BAND2_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+
+ } else if (fint > DPLL_FINT_BAND2_MAX) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "boosting min_divider\n", n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/* Public functions */
+
+void omap2_init_dpll_parent(struct clk *clk)
+{
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = __raw_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent in case the dpll is in bypass */
+ if (cpu_is_omap24xx()) {
+ if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP2XXX_EN_DPLL_FRBYPASS)
+ clk_reparent(clk, dd->clk_bypass);
+ } else if (cpu_is_omap34xx()) {
+ if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP3XXX_EN_DPLL_FRBYPASS)
+ clk_reparent(clk, dd->clk_bypass);
+ } else if (cpu_is_omap44xx()) {
+ if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+ v == OMAP4XXX_EN_DPLL_MNBYPASS)
+ clk_reparent(clk, dd->clk_bypass);
+ }
+ return;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+u32 omap2_get_dpll_rate(struct clk *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = __raw_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (cpu_is_omap24xx()) {
+ if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP2XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ } else if (cpu_is_omap34xx()) {
+ if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP3XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ } else if (cpu_is_omap44xx()) {
+ if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+ v == OMAP4XXX_EN_DPLL_MNBYPASS)
+ return dd->clk_bypass->rate;
+ }
+
+ v = __raw_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm. The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm). So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ clk->dpll_data->rate_tolerance = tolerance;
+
+ return 0;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called. Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption. Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again. Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ int m, n, r, e, scaled_max_m;
+ unsigned long scaled_rt_rp, new_rate;
+ int min_e = -1, min_e_m = -1, min_e_n = -1;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+ "%ld\n", clk->name, target_rate);
+
+ scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ dd->clk_ref->rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ e = target_rate - new_rate;
+ pr_debug("clock: n = %d: m = %d: rate error is %d "
+ "(new_rate = %ld)\n", n, m, e, new_rate);
+
+ if (min_e == -1 ||
+ min_e >= (int)(abs(e) - dd->rate_tolerance)) {
+ min_e = e;
+ min_e_m = m;
+ min_e_n = n;
+
+ pr_debug("clock: found new least error %d\n", min_e);
+
+ /* We found good settings -- bail out now */
+ if (min_e <= dd->rate_tolerance)
+ break;
+ }
+ }
+
+ if (min_e < 0) {
+ pr_debug("clock: error: target rate or tolerance too low\n");
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_e_m;
+ dd->last_rounded_n = min_e_n;
+ dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+ min_e_m, min_e_n);
+
+ pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+ min_e, min_e_m, min_e_n);
+ pr_debug("clock: final rate: %ld (target rate: %ld)\n",
+ dd->last_rounded_rate, target_rate);
+
+ return dd->last_rounded_rate;
+}
+
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 759c72a..a6d0b34 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -2,7 +2,7 @@
* linux/arch/arm/mach-omap2/clock.c
*
* Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -14,11 +14,10 @@
*/
#undef DEBUG
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -28,10 +27,7 @@
#include <plat/clockdomain.h>
#include <plat/cpu.h>
#include <plat/prcm.h>
-#include <asm/div64.h>
-#include <plat/sdrc.h>
-#include "sdrc.h"
#include "clock.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
@@ -39,140 +35,44 @@
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER 1
-#define DPLL_MIN_DIVIDER 1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW -1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR 64
-#define DPLL_SCALE_BASE 2
-#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
- (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN 750000
-#define DPLL_FINT_BAND1_MAX 2100000
-#define DPLL_FINT_BAND2_MIN 7500000
-#define DPLL_FINT_BAND2_MAX 21000000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW -1
-#define DPLL_FINT_INVALID -2
-
u8 cpu_mask;
-/*-------------------------------------------------------------------------
- * OMAP2/3/4 specific clock functions
- *-------------------------------------------------------------------------*/
+/*
+ * OMAP2+ specific clock functions
+ */
-void omap2_init_dpll_parent(struct clk *clk)
-{
- u32 v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return;
-
- /* Return bypass rate if DPLL is bypassed */
- v = __raw_readl(dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* Reparent in case the dpll is in bypass */
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- clk_reparent(clk, dd->clk_bypass);
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- clk_reparent(clk, dd->clk_bypass);
- } else if (cpu_is_omap44xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- clk_reparent(clk, dd->clk_bypass);
- }
- return;
-}
+/* Private functions */
/**
- * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
- * @clk: struct clk *
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
*
- * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
- * don't take effect until the VALID_CONFIG bit is written, write the
- * VALID_CONFIG bit and wait for the write to complete. No return value.
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
*/
-static void _omap2xxx_clk_commit(struct clk *clk)
+static void _omap2_module_wait_ready(struct clk *clk)
{
- if (!cpu_is_omap24xx())
- return;
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val;
- if (!(clk->flags & DELAYED_APP))
- return;
-
- prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
- OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
- /* OCP barrier */
- prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-}
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk *clk, u8 n)
-{
- struct dpll_data *dd;
- long fint;
- int ret = 0;
-
- dd = clk->dpll_data;
-
- /* DPLL divider must result in a valid jitter correction val */
- fint = clk->parent->rate / (n + 1);
- if (fint < DPLL_FINT_BAND1_MIN) {
-
- pr_debug("rejecting n=%d due to Fint failure, "
- "lowering max_divider\n", n);
- dd->max_divider = n;
- ret = DPLL_FINT_UNDERFLOW;
-
- } else if (fint > DPLL_FINT_BAND1_MAX &&
- fint < DPLL_FINT_BAND2_MIN) {
-
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
-
- } else if (fint > DPLL_FINT_BAND2_MAX) {
-
- pr_debug("rejecting n=%d due to Fint failure, "
- "boosting min_divider\n", n);
- dd->min_divider = n;
- ret = DPLL_FINT_INVALID;
-
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+ return;
}
- return ret;
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
+ clk->name);
}
+/* Public functions */
+
/**
* omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
* @clk: OMAP clock struct ptr to use
@@ -181,7 +81,6 @@
* clockdomain pointer, and save it into the struct clk. Intended to be
* called during clk_register(). No return value.
*/
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
void omap2_init_clk_clkdm(struct clk *clk)
{
struct clockdomain *clkdm;
@@ -199,117 +98,6 @@
"clkdm %s\n", clk->name, clk->clkdm_name);
}
}
-#endif
-
-/**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
- *
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to. Update the
- * clk->parent field with the appropriate clk ptr.
- */
-void omap2_init_clksel_parent(struct clk *clk)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 r, found = 0;
-
- if (!clk->clksel)
- return;
-
- r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
-
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
- if (clk->parent != clks->parent) {
- pr_debug("clock: inited %s parent "
- "to %s (was %s)\n",
- clk->name, clks->parent->name,
- ((clk->parent) ?
- clk->parent->name : "NULL"));
- clk_reparent(clk, clks->parent);
- };
- found = 1;
- }
- }
- }
-
- if (!found)
- printk(KERN_ERR "clock: init parent: could not find "
- "regval %0x for clock %s\n", r, clk->name);
-
- return;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values. When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-u32 omap2_get_dpll_rate(struct clk *clk)
-{
- long long dpll_clk;
- u32 dpll_mult, dpll_div, v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return 0;
-
- /* Return bypass rate if DPLL is bypassed */
- v = __raw_readl(dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return dd->clk_bypass->rate;
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return dd->clk_bypass->rate;
- } else if (cpu_is_omap44xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return dd->clk_bypass->rate;
- }
-
- v = __raw_readl(dd->mult_div1_reg);
- dpll_mult = v & dd->mult_mask;
- dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = v & dd->div1_mask;
- dpll_div >>= __ffs(dd->div1_mask);
-
- dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
- do_div(dpll_clk, dpll_div + 1);
-
- return dpll_clk;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
-{
- WARN_ON(!clk->fixed_div);
-
- return clk->parent->rate / clk->fixed_div;
-}
/**
* omap2_clk_dflt_find_companion - find companion clock to @clk
@@ -351,7 +139,8 @@
* omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
* @clk: struct clk * to find IDLEST info for
* @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
*
* Return the CM_IDLEST register address and bit shift corresponding
* to the module that "owns" this clock. This default code assumes
@@ -361,40 +150,26 @@
* CM_IDLEST2). This is not true for all modules. No return value.
*/
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit, u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = clk->enable_bit;
-}
-/**
- * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE). This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code. No return value.
- */
-static void omap2_module_wait_ready(struct clk *clk)
-{
- void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit;
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ if (cpu_is_omap24xx())
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ else if (cpu_is_omap34xx())
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ else
+ BUG();
- /* Not all modules have multiple clocks that their IDLEST depends on */
- if (clk->ops->find_companion) {
- clk->ops->find_companion(clk, &companion_reg, &other_bit);
- if (!(__raw_readl(companion_reg) & (1 << other_bit)))
- return;
- }
-
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
-
- omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
}
int omap2_dflt_clk_enable(struct clk *clk)
@@ -416,7 +191,7 @@
v = __raw_readl(clk->enable_reg); /* OCP barrier */
if (clk->ops->find_idlest)
- omap2_module_wait_ready(clk);
+ _omap2_module_wait_ready(clk);
return 0;
}
@@ -456,336 +231,108 @@
.disable = omap2_dflt_clk_disable,
};
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
+/**
+ * omap2_clk_disable - disable a clock, if the system is not using it
+ * @clk: struct clk * to disable
+ *
+ * Decrements the usecount on struct clk @clk. If there are no users
+ * left, call the clkops-specific clock disable function to disable it
+ * in hardware. If the clock is part of a clockdomain (which they all
+ * should be), request that the clockdomain be disabled. (It too has
+ * a usecount, and so will not be disabled in the hardware until it no
+ * longer has any users.) If the clock has a parent clock (most of
+ * them do), then call ourselves, recursing on the parent clock. This
+ * can cause an entire branch of the clock tree to be powered off by
+ * simply disabling one clock. Intended to be called with the clockfw_lock
+ * spinlock held. No return value.
*/
-static int _omap2_clk_enable(struct clk *clk)
-{
- return clk->ops->enable(clk);
-}
-
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
- clk->ops->disable(clk);
-}
-
void omap2_clk_disable(struct clk *clk)
{
- if (clk->usecount > 0 && !(--clk->usecount)) {
- _omap2_clk_disable(clk);
- if (clk->parent)
- omap2_clk_disable(clk->parent);
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
- if (clk->clkdm)
- omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
-
+ if (clk->usecount == 0) {
+ WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
+ "already 0?", clk->name);
+ return;
}
-}
-int omap2_clk_enable(struct clk *clk)
-{
- int ret = 0;
+ pr_debug("clock: %s: decrementing usecount\n", clk->name);
- if (clk->usecount++ == 0) {
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
- if (clk->clkdm)
- omap2_clkdm_clk_enable(clk->clkdm, clk);
-#endif
+ clk->usecount--;
- if (clk->parent) {
- ret = omap2_clk_enable(clk->parent);
- if (ret)
- goto err;
- }
+ if (clk->usecount > 0)
+ return;
- ret = _omap2_clk_enable(clk);
- if (ret) {
- if (clk->parent)
- omap2_clk_disable(clk->parent);
+ pr_debug("clock: %s: disabling in hardware\n", clk->name);
- goto err;
- }
- }
- return ret;
+ clk->ops->disable(clk);
-err:
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
if (clk->clkdm)
omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
- clk->usecount--;
- return ret;
-}
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
- */
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
- unsigned long rate;
- u32 div = 0;
-
- pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
-
- div = omap2_clksel_get_divisor(clk);
- if (div == 0)
- return clk->rate;
-
- rate = clk->parent->rate / div;
-
- pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
-
- return rate;
+ if (clk->parent)
+ omap2_clk_disable(clk->parent);
}
/**
- * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ * omap2_clk_enable - request that the system enable a clock
+ * @clk: struct clk * to enable
*
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
+ * Increments the usecount on struct clk @clk. If there were no users
+ * previously, then recurse up the clock tree, enabling all of the
+ * clock's parents and all of the parent clockdomains, and finally,
+ * enabling @clk's clockdomain, and @clk itself. Intended to be
+ * called with the clockfw_lock spinlock held. Returns 0 upon success
+ * or a negative error code upon failure.
*/
-static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
- struct clk *src_clk)
+int omap2_clk_enable(struct clk *clk)
{
- const struct clksel *clks;
+ int ret;
- if (!clk->clksel)
- return NULL;
+ pr_debug("clock: %s: incrementing usecount\n", clk->name);
- for (clks = clk->clksel; clks->parent; clks++) {
- if (clks->parent == src_clk)
- break; /* Found the requested parent */
- }
+ clk->usecount++;
- if (!clks->parent) {
- printk(KERN_ERR "clock: Could not find parent clock %s in "
- "clksel array of clock %s\n", src_clk->name,
- clk->name);
- return NULL;
- }
-
- return clks;
-}
-
-/**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
- u32 *new_div)
-{
- unsigned long test_rate;
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 last_div = 0;
-
- pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
-
- *new_div = 1;
-
- clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- /* Sanity check */
- if (clkr->div <= last_div)
- pr_err("clock: clksel_rate table not sorted "
- "for clock %s", clk->name);
-
- last_div = clkr->div;
-
- test_rate = clk->parent->rate / clkr->div;
-
- if (test_rate <= target_rate)
- break; /* found it */
- }
-
- if (!clkr->div) {
- pr_err("clock: Could not find divisor for target "
- "rate %ld for clock %s parent %s\n", target_rate,
- clk->name, clk->parent->name);
- return ~0;
- }
-
- *new_div = clkr->div;
-
- pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
-
- return (clk->parent->rate / clkr->div);
-}
-
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->round_rate)
- return clk->round_rate(clk, rate);
-
- if (clk->flags & RATE_FIXED)
- printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
- "on fixed-rate clock %s\n", clk->name);
-
- return clk->rate;
-}
-
-/**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error
- */
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
-
- clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (!clks)
+ if (clk->usecount > 1)
return 0;
- for (clkr = clks->rates; clkr->div; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
- break;
+ pr_debug("clock: %s: enabling in hardware\n", clk->name);
+
+ if (clk->parent) {
+ ret = omap2_clk_enable(clk->parent);
+ if (ret) {
+ WARN(1, "clock: %s: could not enable parent %s: %d\n",
+ clk->name, clk->parent->name, ret);
+ goto oce_err1;
+ }
}
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find fieldval %d for "
- "clock %s parent %s\n", field_val, clk->name,
- clk->parent->name);
- return 0;
+ if (clk->clkdm) {
+ ret = omap2_clkdm_clk_enable(clk->clkdm, clk);
+ if (ret) {
+ WARN(1, "clock: %s: could not enable clockdomain %s: "
+ "%d\n", clk->name, clk->clkdm->name, ret);
+ goto oce_err2;
+ }
}
- return clkr->div;
-}
-
-/**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value. The return register value is
- * the value before left-shifting. Returns ~0 on error
- */
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
-
- /* should never happen */
- WARN_ON(div == 0);
-
- clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->div == div))
- break;
+ ret = clk->ops->enable(clk);
+ if (ret) {
+ WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret);
+ goto oce_err3;
}
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor %d for "
- "clock %s parent %s\n", div, clk->name,
- clk->parent->name);
- return ~0;
- }
-
- return clkr->val;
-}
-
-/**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
- *
- * Returns the integer divisor upon success or 0 on error.
- */
-u32 omap2_clksel_get_divisor(struct clk *clk)
-{
- u32 v;
-
- if (!clk->clksel_mask)
- return 0;
-
- v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
-
- return omap2_clksel_to_divisor(clk, v);
-}
-
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 v, field_val, validrate, new_div = 0;
-
- if (!clk->clksel_mask)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- field_val = omap2_divisor_to_clksel(clk, new_div);
- if (field_val == ~0)
- return -EINVAL;
-
- v = __raw_readl(clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- __raw_writel(v, clk->clksel_reg);
- v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-
- clk->rate = clk->parent->rate / new_div;
-
- _omap2xxx_clk_commit(clk);
-
return 0;
-}
+oce_err3:
+ if (clk->clkdm)
+ omap2_clkdm_clk_disable(clk->clkdm, clk);
+oce_err2:
+ if (clk->parent)
+ omap2_clk_disable(clk->parent);
+oce_err1:
+ clk->usecount--;
+
+ return ret;
+}
/* Set the clock rate for a clock source */
int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
@@ -794,11 +341,6 @@
pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
- /* CONFIG_PARTICIPANT clocks are changed only in sets via the
- rate table mechanism, driven by mpu_speed */
- if (clk->flags & CONFIG_PARTICIPANT)
- return -EINVAL;
-
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
@@ -806,270 +348,32 @@
return ret;
}
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
- */
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
- u32 *field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
-
- clks = omap2_get_clksel_by_parent(clk, src_clk);
- if (!clks)
- return 0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
- break; /* Found the default rate for this platform */
- }
-
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find default rate for "
- "clock %s parent %s\n", clk->name,
- src_clk->parent->name);
- return 0;
- }
-
- /* Should never happen. Add a clksel mask to the struct clk. */
- WARN_ON(clk->clksel_mask == 0);
-
- *field_val = clkr->val;
-
- return clkr->div;
-}
-
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
- u32 field_val, v, parent_div;
-
- if (clk->flags & CONFIG_PARTICIPANT)
- return -EINVAL;
-
if (!clk->clksel)
return -EINVAL;
- parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
- if (!parent_div)
- return -EINVAL;
+ if (clk->parent == new_parent)
+ return 0;
- /* Set new source value (previous dividers if any in effect) */
- v = __raw_readl(clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- __raw_writel(v, clk->clksel_reg);
- v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-
- _omap2xxx_clk_commit(clk);
-
- clk_reparent(clk, new_parent);
-
- /* CLKSEL clocks follow their parents' rates, divided by a divisor */
- clk->rate = new_parent->rate;
-
- if (parent_div > 0)
- clk->rate /= parent_div;
-
- pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
- clk->name, clk->parent->name, clk->rate);
-
- return 0;
+ return omap2_clksel_set_parent(clk, new_parent);
}
-/* DPLL rate rounding code */
+/* OMAP3/4 non-CORE DPLL clkops */
-/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm. The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm). So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
- if (!clk || !clk->dpll_data)
- return -EINVAL;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- clk->dpll_data->rate_tolerance = tolerance;
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+ .enable = omap3_noncore_dpll_enable,
+ .disable = omap3_noncore_dpll_disable,
+};
- return 0;
-}
+#endif
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
- unsigned int m, unsigned int n)
-{
- unsigned long long num;
-
- num = (unsigned long long)parent_rate * m;
- do_div(num, n);
- return num;
-}
/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL. Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
- * a non-scaled m upon return. This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
+ * OMAP2+ clock reset and init functions
*/
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
- unsigned long target_rate,
- unsigned long parent_rate)
-{
- int r = 0, carry = 0;
-
- /* Unscale m and round if necessary */
- if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
- carry = 1;
- *m = (*m / DPLL_SCALE_FACTOR) + carry;
-
- /*
- * The new rate must be <= the target rate to avoid programming
- * a rate that is impossible for the hardware to handle
- */
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- if (*new_rate > target_rate) {
- (*m)--;
- *new_rate = 0;
- }
-
- /* Guard against m underflow */
- if (*m < DPLL_MIN_MULTIPLIER) {
- *m = DPLL_MIN_MULTIPLIER;
- *new_rate = 0;
- r = DPLL_MULT_UNDERFLOW;
- }
-
- if (*new_rate == 0)
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
- return r;
-}
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called. Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption. Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again. Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
-{
- int m, n, r, e, scaled_max_m;
- unsigned long scaled_rt_rp, new_rate;
- int min_e = -1, min_e_m = -1, min_e_n = -1;
- struct dpll_data *dd;
-
- if (!clk || !clk->dpll_data)
- return ~0;
-
- dd = clk->dpll_data;
-
- pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
- "%ld\n", clk->name, target_rate);
-
- scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
- scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
- dd->last_rounded_rate = 0;
-
- for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
- /* Is the (input clk, divider) pair valid for the DPLL? */
- r = _dpll_test_fint(clk, n);
- if (r == DPLL_FINT_UNDERFLOW)
- break;
- else if (r == DPLL_FINT_INVALID)
- continue;
-
- /* Compute the scaled DPLL multiplier, based on the divider */
- m = scaled_rt_rp * n;
-
- /*
- * Since we're counting n up, a m overflow means we
- * can bail out completely (since as n increases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (m > scaled_max_m)
- break;
-
- r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- dd->clk_ref->rate);
-
- /* m can't be set low enough for this n - try with a larger n */
- if (r == DPLL_MULT_UNDERFLOW)
- continue;
-
- e = target_rate - new_rate;
- pr_debug("clock: n = %d: m = %d: rate error is %d "
- "(new_rate = %ld)\n", n, m, e, new_rate);
-
- if (min_e == -1 ||
- min_e >= (int)(abs(e) - dd->rate_tolerance)) {
- min_e = e;
- min_e_m = m;
- min_e_n = n;
-
- pr_debug("clock: found new least error %d\n", min_e);
-
- /* We found good settings -- bail out now */
- if (min_e <= dd->rate_tolerance)
- break;
- }
- }
-
- if (min_e < 0) {
- pr_debug("clock: error: target rate or tolerance too low\n");
- return ~0;
- }
-
- dd->last_rounded_m = min_e_m;
- dd->last_rounded_n = min_e_n;
- dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
- min_e_m, min_e_n);
-
- pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
- min_e, min_e_m, min_e_n);
- pr_debug("clock: final rate: %ld (target rate: %ld)\n",
- dd->last_rounded_rate, target_rate);
-
- return dd->last_rounded_rate;
-}
-
-/*-------------------------------------------------------------------------
- * Omap2 clock reset and init functions
- *-------------------------------------------------------------------------*/
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk)
@@ -1086,9 +390,110 @@
if (cpu_is_omap34xx()) {
omap2_clk_enable(clk);
omap2_clk_disable(clk);
- } else
- _omap2_clk_disable(clk);
+ } else {
+ clk->ops->disable(clk);
+ }
if (clk->clkdm != NULL)
pwrdm_clkdm_state_switch(clk->clkdm);
}
#endif
+
+/**
+ * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
+ * @mpurate_ck_name: clk name of the clock to change rate
+ *
+ * Change the ARM MPU clock rate to the rate specified on the command
+ * line, if one was specified. @mpurate_ck_name should be
+ * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
+ * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
+ * handled by the virt_prcm_set clock, but this should be handled by
+ * the OPP layer. XXX This is intended to be handled by the OPP layer
+ * code in the near future and should be removed from the clock code.
+ * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
+ * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
+ * cannot be found, or 0 upon success.
+ */
+int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
+{
+ struct clk *mpurate_ck;
+ int r;
+
+ if (!mpurate)
+ return -EINVAL;
+
+ mpurate_ck = clk_get(NULL, mpurate_ck_name);
+ if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
+ return -ENOENT;
+
+ r = clk_set_rate(mpurate_ck, mpurate);
+ if (IS_ERR_VALUE(r)) {
+ WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
+ mpurate_ck->name, mpurate, r);
+ return -EINVAL;
+ }
+
+ calibrate_delay();
+ recalculate_root_clocks();
+
+ clk_put(mpurate_ck);
+
+ return 0;
+}
+
+/**
+ * omap2_clk_print_new_rates - print summary of current clock tree rates
+ * @hfclkin_ck_name: clk name for the off-chip HF oscillator
+ * @core_ck_name: clk name for the on-chip CORE_CLK
+ * @mpu_ck_name: clk name for the ARM MPU clock
+ *
+ * Prints a short message to the console with the HFCLKIN oscillator
+ * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
+ * Called by the boot-time MPU rate switching code. XXX This is intended
+ * to be handled by the OPP layer code in the near future and should be
+ * removed from the clock code. No return value.
+ */
+void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+ const char *core_ck_name,
+ const char *mpu_ck_name)
+{
+ struct clk *hfclkin_ck, *core_ck, *mpu_ck;
+ unsigned long hfclkin_rate;
+
+ mpu_ck = clk_get(NULL, mpu_ck_name);
+ if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
+ return;
+
+ core_ck = clk_get(NULL, core_ck_name);
+ if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
+ return;
+
+ hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
+ if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
+ return;
+
+ hfclkin_rate = clk_get_rate(hfclkin_ck);
+
+ pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+ "%ld.%01ld/%ld/%ld MHz\n",
+ (hfclkin_rate / 1000000),
+ ((hfclkin_rate / 100000) % 10),
+ (clk_get_rate(core_ck) / 1000000),
+ (clk_get_rate(mpu_ck) / 1000000));
+}
+
+/* Common data */
+
+struct clk_functions omap2_clk_functions = {
+ .clk_enable = omap2_clk_enable,
+ .clk_disable = omap2_clk_disable,
+ .clk_round_rate = omap2_clk_round_rate,
+ .clk_set_rate = omap2_clk_set_rate,
+ .clk_set_parent = omap2_clk_set_parent,
+ .clk_disable_unused = omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+ /* These will be removed when the OPP code is integrated */
+ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+ .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
+#endif
+};
+
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 93c48df..ad8a1f7 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -47,7 +47,10 @@
#define DPLL_LOW_POWER_BYPASS 0x5
#define DPLL_LOCKED 0x7
-int omap2_clk_init(void);
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE 0x1
+#define DPLL_NO_DCO_SEL 0x2
+
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -78,23 +81,53 @@
u32 *new_div);
u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-void omap2_clk_prepare_for_reboot(void);
+
+
+#ifdef CONFIG_ARCH_OMAP2
+void omap2xxx_clk_prepare_for_reboot(void);
+#else
+static inline void omap2xxx_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_clk_prepare_for_reboot(void);
+#else
+static inline void omap3_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+void omap4_clk_prepare_for_reboot(void);
+#else
+static inline void omap4_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit);
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
- u8 *idlest_bit);
+ u8 *idlest_bit, u8 *idlest_val);
+int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
+void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+ const char *core_ck_name,
+ const char *mpu_ck_name);
extern u8 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_dummy;
extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
@@ -104,5 +137,14 @@
extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
+extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
+#else
+#define omap2_clk_init_cpufreq_table 0
+#define omap2_clk_exit_cpufreq_table 0
+#endif
+
+extern const struct clkops clkops_omap3_noncore_dpll_ops;
#endif
diff --git a/arch/arm/mach-omap2/clock2xxx_data.c b/arch/arm/mach-omap2/clock2420_data.c
similarity index 72%
copy from arch/arm/mach-omap2/clock2xxx_data.c
copy to arch/arm/mach-omap2/clock2420_data.c
index 97dc7cf..f12af95 100644
--- a/arch/arm/mach-omap2/clock2xxx_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1,8 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/clock2xxx_data.c
+ * linux/arch/arm/mach-omap2/clock2420_data.c
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -13,9 +13,9 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/list.h>
#include <plat/clkdev_omap.h>
@@ -28,8 +28,10 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+
+/*
+ * 2420 clock tree.
*
* NOTE:In many cases here we are assigning a 'default' parent. In many
* cases the parent is selectable. The get/set parent calls will also
@@ -46,14 +48,13 @@
* domains. Many get their interface clocks from the L4 domain, but get
* functional clocks from fixed sources or other core domain derived
* clocks.
- *-------------------------------------------------------------------------*/
+ */
/* Base external input clocks */
static struct clk func_32k_ck = {
.name = "func_32k_ck",
.ops = &clkops_null,
.rate = 32000,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -61,7 +62,6 @@
.name = "secure_32k_ck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -79,14 +79,13 @@
.ops = &clkops_null,
.parent = &osc_ck,
.clkdm_name = "wkup_clkdm",
- .recalc = &omap2_sys_clk_recalc,
+ .recalc = &omap2xxx_sys_clk_recalc,
};
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.name = "alt_ck",
.ops = &clkops_null,
.rate = 54000000,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -107,7 +106,7 @@
.clk_ref = &sys_ck,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP24XX_EN_DPLL_MASK,
- .max_multiplier = 1024,
+ .max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -132,7 +131,7 @@
.ops = &clkops_apll96,
.parent = &sys_ck,
.rate = 96000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
@@ -143,7 +142,7 @@
.ops = &clkops_apll54,
.parent = &sys_ck,
.rate = 54000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
@@ -191,36 +190,12 @@
.recalc = &followparent_recalc,
};
-/* func_96m_ck */
-static const struct clksel_rate func_96m_apll96_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel_rate func_96m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
- { .div = 0 },
-};
-
-static const struct clksel func_96m_clksel[] = {
- { .parent = &apll96_ck, .rates = func_96m_apll96_rates },
- { .parent = &alt_ck, .rates = func_96m_alt_rates },
- { .parent = NULL }
-};
-
-/* The parent of this clock is not selectable on 2420. */
static struct clk func_96m_ck = {
.name = "func_96m_ck",
.ops = &clkops_null,
.parent = &apll96_ck,
.clkdm_name = "wkup_clkdm",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP2430_96M_SOURCE,
- .clksel = func_96m_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
+ .recalc = &followparent_recalc,
};
/* func_48m_ck */
@@ -261,7 +236,7 @@
.parent = &func_48m_ck,
.fixed_div = 4,
.clkdm_name = "wkup_clkdm",
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
/* Secure timer, only available in secure mode */
@@ -313,10 +288,10 @@
.ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
.clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .enable_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
.init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK,
.clksel = common_clkout_src_clksel,
.recalc = &omap2_clksel_recalc,
@@ -343,7 +318,7 @@
.ops = &clkops_null,
.parent = &sys_clkout_src,
.clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
.clksel = sys_clkout_clksel,
.recalc = &omap2_clksel_recalc,
@@ -357,10 +332,10 @@
.ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
.clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .enable_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
.init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK,
.clksel = common_clkout_src_clksel,
.recalc = &omap2_clksel_recalc,
@@ -379,7 +354,7 @@
.ops = &clkops_null,
.parent = &sys_clkout2_src,
.clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2420_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
.clksel = sys_clkout2_clksel,
.recalc = &omap2_clksel_recalc,
@@ -392,7 +367,7 @@
.ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
.clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
+ .enable_reg = OMAP2420_PRCM_CLKEMUL_CTRL,
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
.recalc = &followparent_recalc,
@@ -426,21 +401,17 @@
.name = "mpu_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
.clksel = mpu_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * DSP (2420-UMA+IVA1) clock domain
* Clocks:
- * 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
* 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
*
* Won't be too specific here. The core clock comes into this block
@@ -468,7 +439,6 @@
.name = "dsp_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -476,15 +446,12 @@
.clksel_mask = OMAP24XX_CLKSEL_DSP_MASK,
.clksel = dsp_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* DSP interface clock */
static const struct clksel_rate dsp_irate_ick_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
{ .div = 0 },
};
@@ -498,13 +465,10 @@
.name = "dsp_irate_ick",
.ops = &clkops_null,
.parent = &dsp_fck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
.clksel = dsp_irate_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* 2420 only */
@@ -512,21 +476,10 @@
.name = "dsp_ick", /* apparently ipi and isp */
.ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
.enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
};
-/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
-static struct clk iva2_1_ick = {
- .name = "iva2_1_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-};
-
/*
* The IVA1 is an ARM7 core on the 2420 that has nothing to do with
* the C54x, but which is contained in the DSP powerdomain. Does not
@@ -536,7 +489,6 @@
.name = "iva1_ifck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CONFIG_PARTICIPANT | DELAYED_APP,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
@@ -544,8 +496,6 @@
.clksel_mask = OMAP2420_CLKSEL_IVA_MASK,
.clksel = dsp_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* IVA1 mpu/int/i/f clocks are /2 of parent */
@@ -557,7 +507,7 @@
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
.fixed_div = 2,
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
/*
@@ -599,14 +549,11 @@
.name = "core_l3_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
.clksel = core_l3_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* usb_l4_ick */
@@ -627,7 +574,6 @@
.name = "usb_l4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
@@ -635,8 +581,6 @@
.clksel_mask = OMAP24XX_CLKSEL_USB_MASK,
.clksel = usb_l4_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -661,14 +605,11 @@
.name = "l4_ck",
.ops = &clkops_null,
.parent = &core_l3_ck,
- .flags = DELAYED_APP,
.clkdm_name = "core_l4_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
.clksel = l4_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -684,7 +625,6 @@
{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_243X },
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
{ .div = 0 }
@@ -699,7 +639,6 @@
.name = "ssi_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
@@ -707,8 +646,6 @@
.clksel_mask = OMAP24XX_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_sst_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -737,7 +674,6 @@
* divided value of fclk.
*
*/
-/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
static const struct clksel gfx_fck_clksel[] = {
@@ -771,8 +707,6 @@
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static struct clk gfx_ick = {
@@ -786,52 +720,6 @@
};
/*
- * Modem clock domain (2430)
- * CLOCKS:
- * MDM_OSC_CLK
- * MDM_ICLK
- * These clocks are usable in chassis mode only.
- */
-static const struct clksel_rate mdm_ick_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
- { .div = 6, .val = 6, .flags = RATE_IN_243X },
- { .div = 9, .val = 9, .flags = RATE_IN_243X },
- { .div = 0 }
-};
-
-static const struct clksel mdm_ick_clksel[] = {
- { .parent = &core_ck, .rates = mdm_ick_core_rates },
- { .parent = NULL }
-};
-
-static struct clk mdm_ick = { /* used both as a ick and fck */
- .name = "mdm_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .clkdm_name = "mdm_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
- .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
- .clksel_mask = OMAP2430_CLKSEL_MDM_MASK,
- .clksel = mdm_ick_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk mdm_osc_ck = {
- .name = "mdm_osc_ck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &osc_ck,
- .clkdm_name = "mdm_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
- .enable_bit = OMAP2430_EN_OSC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-/*
* DSS clock domain
* CLOCKs:
* DSS_L4_ICLK, DSS_L3_ICLK,
@@ -880,7 +768,6 @@
.name = "dss1_fck",
.ops = &clkops_omap2_dflt,
.parent = &core_ck, /* Core or sys */
- .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
@@ -889,8 +776,6 @@
.clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK,
.clksel = dss1_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static const struct clksel_rate dss2_fck_sys_rates[] = {
@@ -913,7 +798,6 @@
.name = "dss2_fck",
.ops = &clkops_omap2_dflt,
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
- .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
@@ -1242,9 +1126,8 @@
};
static struct clk mcbsp1_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1253,9 +1136,8 @@
};
static struct clk mcbsp1_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1264,9 +1146,8 @@
};
static struct clk mcbsp2_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1275,9 +1156,8 @@
};
static struct clk mcbsp2_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1285,76 +1165,9 @@
.recalc = &followparent_recalc,
};
-static struct clk mcbsp3_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 4,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 4,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
- .name = "mcbsp_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 5,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
- .name = "mcbsp_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 5,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk mcspi1_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1363,9 +1176,8 @@
};
static struct clk mcspi1_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_48m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1374,9 +1186,8 @@
};
static struct clk mcspi2_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1385,9 +1196,8 @@
};
static struct clk mcspi2_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &func_48m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1395,28 +1205,6 @@
.recalc = &followparent_recalc,
};
-static struct clk mcspi3_ick = {
- .name = "mcspi_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
- .name = "mcspi_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 3,
- .parent = &func_48m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk uart1_ick = {
.name = "uart1_ick",
.ops = &clkops_omap2_dflt_wait,
@@ -1549,16 +1337,6 @@
.recalc = &followparent_recalc,
};
-static struct clk icr_ick = {
- .name = "icr_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP2430_EN_ICR_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk cam_ick = {
.name = "cam_ick",
.ops = &clkops_omap2_dflt,
@@ -1735,9 +1513,8 @@
};
static struct clk i2c2_ick = {
- .name = "i2c_ick",
+ .name = "i2c2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1746,9 +1523,8 @@
};
static struct clk i2c2_fck = {
- .name = "i2c_fck",
+ .name = "i2c2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &func_12m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1756,21 +1532,9 @@
.recalc = &followparent_recalc,
};
-static struct clk i2chs2_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2430_i2chs_wait,
- .id = 2,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk i2c1_ick = {
- .name = "i2c_ick",
+ .name = "i2c1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1779,9 +1543,8 @@
};
static struct clk i2c1_fck = {
- .name = "i2c_fck",
+ .name = "i2c1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_12m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1789,17 +1552,6 @@
.recalc = &followparent_recalc,
};
-static struct clk i2chs1_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2430_i2chs_wait,
- .id = 1,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk gpmc_fck = {
.name = "gpmc_fck",
.ops = &clkops_null, /* RMK: missing? */
@@ -1864,7 +1616,6 @@
.name = "vlynq_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
@@ -1873,19 +1624,6 @@
.clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK,
.clksel = vlynq_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static struct clk sdrc_ick = {
- .name = "sdrc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP2430_EN_SDRC_SHIFT,
- .recalc = &followparent_recalc,
};
static struct clk des_ick = {
@@ -1948,108 +1686,6 @@
.recalc = &followparent_recalc,
};
-static struct clk usbhs_ick = {
- .name = "usbhs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_USBHS_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
- .name = "mmchs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
- .name = "mmchs_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
- .name = "mmchs_ick",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
- .name = "mmchs_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_96m_ck,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
- .name = "gpio5_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk gpio5_fck = {
- .name = "gpio5_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mdm_intc_ick = {
- .name = "mdm_intc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchsdb1_fck = {
- .name = "mmchsdb_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmchsdb2_fck = {
- .name = "mmchsdb_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
/*
* This clock is a composite clock which does entire set changes then
* forces a rebalance. It keys on the MPU speed, but it really could
@@ -2067,7 +1703,6 @@
static struct clk virt_prcm_set = {
.name = "virt_prcm_set",
.ops = &clkops_null,
- .flags = DELAYED_APP,
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
.recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
.set_rate = &omap2_select_table_rate,
@@ -2079,200 +1714,167 @@
* clkdev integration
*/
-static struct omap_clk omap24xx_clks[] = {
+static struct omap_clk omap2420_clks[] = {
/* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
- CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_242X),
+ CLK(NULL, "osc_ck", &osc_ck, CK_242X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_242X),
+ CLK(NULL, "alt_ck", &alt_ck, CK_242X),
/* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
- CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
- CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
+ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X),
+ CLK(NULL, "apll96_ck", &apll96_ck, CK_242X),
+ CLK(NULL, "apll54_ck", &apll54_ck, CK_242X),
/* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
- CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
- CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
- CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
+ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X),
+ CLK(NULL, "core_ck", &core_ck, CK_242X),
+ CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X),
+ CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X),
+ CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X),
+ CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_242X),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X),
+ CLK(NULL, "sys_clkout", &sys_clkout, CK_242X),
CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
CLK(NULL, "emul_ck", &emul_ck, CK_242X),
/* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_242X),
/* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
- CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+ CLK(NULL, "dsp_fck", &dsp_fck, CK_242X),
+ CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_242X),
CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
- CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
/* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
- /* Modem domain clocks */
- CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
- CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_242X),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X),
+ CLK(NULL, "gfx_ick", &gfx_ick, CK_242X),
/* DSS domain clocks */
- CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
- CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
+ CLK("omapdss", "ick", &dss_ick, CK_242X),
+ CLK("omapdss", "dss1_fck", &dss1_fck, CK_242X),
+ CLK("omapdss", "dss2_fck", &dss2_fck, CK_242X),
+ CLK("omapdss", "tv_fck", &dss_54m_fck, CK_242X),
/* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_242X),
/* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
+ CLK(NULL, "l4_ck", &l4_ck, CK_242X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X),
/* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X),
/* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
- CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
- CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
- CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
- CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
- CLK(NULL, "icr_ick", &icr_ick, CK_243X),
- CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
- CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_242X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_242X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_242X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_242X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_242X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_242X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_242X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_242X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_242X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_242X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_242X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_242X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_242X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_242X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_242X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_242X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_242X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_242X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_242X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_242X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_242X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_242X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_242X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_242X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_242X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_242X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_242X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_242X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_242X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_242X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_242X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_242X),
+ CLK(NULL, "gpios_ick", &gpios_ick, CK_242X),
+ CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
+ CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_242X),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
+ CLK("omap24xxcam", "fck", &cam_fck, CK_242X),
+ CLK("omap24xxcam", "ick", &cam_ick, CK_242X),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X),
+ CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X),
+ CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X),
CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_242X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_242X),
CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
- CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
- CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_242X),
+ CLK(NULL, "fac_fck", &fac_fck, CK_242X),
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
- CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
- CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
+ CLK("omap_hdq.1", "fck", &hdq_fck, CK_242X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_242X),
CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
- CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
- CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_242X),
CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
- CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
+ CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
+ CLK(NULL, "sdma_ick", &sdma_ick, CK_242X),
CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
- CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
- CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
- CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
- CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
- CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
- CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
- CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
- CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
- CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
- CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
- CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
- CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
- CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
- CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
- CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
- CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK(NULL, "des_ick", &des_ick, CK_242X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_242X),
+ CLK("omap_rng", "ick", &rng_ick, CK_242X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_242X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_242X),
+ CLK(NULL, "usb_fck", &usb_fck, CK_242X),
};
/*
* init code
*/
-int __init omap2_clk_init(void)
+int __init omap2420_clk_init(void)
{
const struct prcm_config *prcm;
struct omap_clk *c;
u32 clkrate;
- u16 cpu_clkflg;
- if (cpu_is_omap242x()) {
- prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_242X;
- cpu_clkflg = CK_242X;
- rate_table = omap2420_rate_table;
- } else if (cpu_is_omap2430()) {
- prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_243X;
- cpu_clkflg = CK_243X;
- rate_table = omap2430_rate_table;
- }
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+ cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
+ cpu_mask = RATE_IN_242X;
+ rate_table = omap2420_rate_table;
clk_init(&omap2_clk_functions);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+ c++)
clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
- sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+ sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- clk_register(c->lk.clk);
- omap2_init_clk_clkdm(c->lk.clk);
- }
+ for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+ c++) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
+ }
/* Check the MPU rate set by bootloader */
clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
@@ -2288,10 +1890,9 @@
recalculate_root_clocks();
- printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
- (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+ pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
+ (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+ (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
/*
* Only enable those clocks we will need, let the drivers
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
new file mode 100644
index 0000000..44d0ccc
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -0,0 +1,59 @@
+/*
+ * clock2430.c - OMAP2430-specific clock integration code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/arch/arm/mach-omap2/clock2xxx_data.c b/arch/arm/mach-omap2/clock2430_data.c
similarity index 75%
rename from arch/arm/mach-omap2/clock2xxx_data.c
rename to arch/arm/mach-omap2/clock2430_data.c
index 97dc7cf..0438b6e 100644
--- a/arch/arm/mach-omap2/clock2xxx_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1,8 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/clock2xxx_data.c
+ * linux/arch/arm/mach-omap2/clock2430_data.c
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
@@ -13,9 +13,9 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/list.h>
#include <plat/clkdev_omap.h>
@@ -28,8 +28,10 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+
+/*
+ * 2430 clock tree.
*
* NOTE:In many cases here we are assigning a 'default' parent. In many
* cases the parent is selectable. The get/set parent calls will also
@@ -46,14 +48,13 @@
* domains. Many get their interface clocks from the L4 domain, but get
* functional clocks from fixed sources or other core domain derived
* clocks.
- *-------------------------------------------------------------------------*/
+ */
/* Base external input clocks */
static struct clk func_32k_ck = {
.name = "func_32k_ck",
.ops = &clkops_null,
.rate = 32000,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -61,7 +62,6 @@
.name = "secure_32k_ck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -79,14 +79,13 @@
.ops = &clkops_null,
.parent = &osc_ck,
.clkdm_name = "wkup_clkdm",
- .recalc = &omap2_sys_clk_recalc,
+ .recalc = &omap2xxx_sys_clk_recalc,
};
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.name = "alt_ck",
.ops = &clkops_null,
.rate = 54000000,
- .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
};
@@ -107,7 +106,7 @@
.clk_ref = &sys_ck,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP24XX_EN_DPLL_MASK,
- .max_multiplier = 1024,
+ .max_multiplier = 1023,
.min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -132,7 +131,7 @@
.ops = &clkops_apll96,
.parent = &sys_ck,
.rate = 96000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
@@ -143,7 +142,7 @@
.ops = &clkops_apll54,
.parent = &sys_ck,
.rate = 54000000,
- .flags = RATE_FIXED | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
@@ -208,7 +207,6 @@
{ .parent = NULL }
};
-/* The parent of this clock is not selectable on 2420. */
static struct clk func_96m_ck = {
.name = "func_96m_ck",
.ops = &clkops_null,
@@ -219,8 +217,6 @@
.clksel_mask = OMAP2430_96M_SOURCE,
.clksel = func_96m_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* func_48m_ck */
@@ -261,7 +257,7 @@
.parent = &func_48m_ck,
.fixed_div = 4,
.clkdm_name = "wkup_clkdm",
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
/* Secure timer, only available in secure mode */
@@ -313,10 +309,10 @@
.ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
.clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .enable_reg = OMAP2430_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
.init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2430_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK,
.clksel = common_clkout_src_clksel,
.recalc = &omap2_clksel_recalc,
@@ -343,7 +339,7 @@
.ops = &clkops_null,
.parent = &sys_clkout_src,
.clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
+ .clksel_reg = OMAP2430_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
.clksel = sys_clkout_clksel,
.recalc = &omap2_clksel_recalc,
@@ -351,48 +347,12 @@
.set_rate = &omap2_clksel_set_rate
};
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2_src = {
- .name = "sys_clkout2_src",
- .ops = &clkops_omap2_dflt,
- .parent = &func_54m_ck,
- .clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK,
- .clksel = common_clkout_src_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
- { .parent = &sys_clkout2_src, .rates = common_clkout_rates },
- { .parent = NULL }
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
- .name = "sys_clkout2",
- .ops = &clkops_null,
- .parent = &sys_clkout2_src,
- .clkdm_name = "wkup_clkdm",
- .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
- .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
- .clksel = sys_clkout2_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
static struct clk emul_ck = {
.name = "emul_ck",
.ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
.clkdm_name = "wkup_clkdm",
- .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
+ .enable_reg = OMAP2430_PRCM_CLKEMUL_CTRL,
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
.recalc = &followparent_recalc,
@@ -411,9 +371,6 @@
static const struct clksel_rate mpu_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_242X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
{ .div = 0 },
};
@@ -426,22 +383,18 @@
.name = "mpu_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
.clksel = mpu_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * DSP (2430-IVA2.1) clock domain
* Clocks:
* 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
- * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
*
* Won't be too specific here. The core clock comes into this block
* it is divided then tee'ed. One branch goes directly to xyz enable
@@ -453,9 +406,6 @@
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
{ .div = 0 },
};
@@ -468,7 +418,6 @@
.name = "dsp_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -476,8 +425,6 @@
.clksel_mask = OMAP24XX_CLKSEL_DSP_MASK,
.clksel = dsp_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* DSP interface clock */
@@ -498,23 +445,10 @@
.name = "dsp_irate_ick",
.ops = &clkops_null,
.parent = &dsp_fck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
.clksel = dsp_irate_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* 2420 only */
-static struct clk dsp_ick = {
- .name = "dsp_ick", /* apparently ipi and isp */
- .ops = &clkops_omap2_dflt_wait,
- .parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
- .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
};
/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
@@ -522,45 +456,11 @@
.name = "iva2_1_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
};
/*
- * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
- * the C54x, but which is contained in the DSP powerdomain. Does not
- * exist on later OMAPs.
- */
-static struct clk iva1_ifck = {
- .name = "iva1_ifck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_ck,
- .flags = CONFIG_PARTICIPANT | DELAYED_APP,
- .clkdm_name = "iva1_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- .clksel_mask = OMAP2420_CLKSEL_IVA_MASK,
- .clksel = dsp_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
- .name = "iva1_mpu_int_ifck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &iva1_ifck,
- .clkdm_name = "iva1_clkdm",
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
- .fixed_div = 2,
- .recalc = &omap2_fixed_divisor_recalc,
-};
-
-/*
* L3 clock domain
* L3 clocks are used for both interface and functional clocks to
* multiple entities. Some of these clocks are completely managed
@@ -581,12 +481,8 @@
*/
static const struct clksel_rate core_l3_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_242X },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X },
{ .div = 0 }
};
@@ -599,14 +495,11 @@
.name = "core_l3_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
.clksel = core_l3_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* usb_l4_ick */
@@ -627,7 +520,6 @@
.name = "usb_l4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
@@ -635,8 +527,6 @@
.clksel_mask = OMAP24XX_CLKSEL_USB_MASK,
.clksel = usb_l4_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -661,14 +551,11 @@
.name = "l4_ck",
.ops = &clkops_null,
.parent = &core_l3_ck,
- .flags = DELAYED_APP,
.clkdm_name = "core_l4_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
.clksel = l4_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -685,8 +572,6 @@
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 5, .val = 5, .flags = RATE_IN_243X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
{ .div = 0 }
};
@@ -699,7 +584,6 @@
.name = "ssi_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
@@ -707,8 +591,6 @@
.clksel_mask = OMAP24XX_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_sst_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -737,7 +619,6 @@
* divided value of fclk.
*
*/
-/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
static const struct clksel gfx_fck_clksel[] = {
@@ -771,8 +652,6 @@
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static struct clk gfx_ick = {
@@ -809,7 +688,6 @@
.name = "mdm_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
@@ -817,8 +695,6 @@
.clksel_mask = OMAP2430_CLKSEL_MDM_MASK,
.clksel = mdm_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static struct clk mdm_osc_ck = {
@@ -880,7 +756,6 @@
.name = "dss1_fck",
.ops = &clkops_omap2_dflt,
.parent = &core_ck, /* Core or sys */
- .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
@@ -889,8 +764,6 @@
.clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK,
.clksel = dss1_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static const struct clksel_rate dss2_fck_sys_rates[] = {
@@ -913,7 +786,6 @@
.name = "dss2_fck",
.ops = &clkops_omap2_dflt,
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
- .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
@@ -1242,9 +1114,8 @@
};
static struct clk mcbsp1_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1253,9 +1124,8 @@
};
static struct clk mcbsp1_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1264,9 +1134,8 @@
};
static struct clk mcbsp2_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1275,9 +1144,8 @@
};
static struct clk mcbsp2_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1286,9 +1154,8 @@
};
static struct clk mcbsp3_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1297,9 +1164,8 @@
};
static struct clk mcbsp3_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1308,9 +1174,8 @@
};
static struct clk mcbsp4_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp4_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1319,9 +1184,8 @@
};
static struct clk mcbsp4_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp4_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1330,9 +1194,8 @@
};
static struct clk mcbsp5_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp5_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 5,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1341,9 +1204,8 @@
};
static struct clk mcbsp5_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp5_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 5,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1352,9 +1214,8 @@
};
static struct clk mcspi1_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1363,9 +1224,8 @@
};
static struct clk mcspi1_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_48m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1374,9 +1234,8 @@
};
static struct clk mcspi2_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1385,9 +1244,8 @@
};
static struct clk mcspi2_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &func_48m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1396,9 +1254,8 @@
};
static struct clk mcspi3_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1407,9 +1264,8 @@
};
static struct clk mcspi3_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &func_48m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1614,26 +1470,6 @@
.recalc = &followparent_recalc,
};
-static struct clk wdt3_ick = {
- .name = "wdt3_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
- .name = "wdt3_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk mspro_ick = {
.name = "mspro_ick",
.ops = &clkops_omap2_dflt_wait,
@@ -1654,26 +1490,6 @@
.recalc = &followparent_recalc,
};
-static struct clk mmc_ick = {
- .name = "mmc_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk mmc_fck = {
- .name = "mmc_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk fac_ick = {
.name = "fac_ick",
.ops = &clkops_omap2_dflt_wait,
@@ -1694,26 +1510,6 @@
.recalc = &followparent_recalc,
};
-static struct clk eac_ick = {
- .name = "eac_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &l4_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static struct clk eac_fck = {
- .name = "eac_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk hdq_ick = {
.name = "hdq_ick",
.ops = &clkops_omap2_dflt_wait,
@@ -1734,10 +1530,13 @@
.recalc = &followparent_recalc,
};
+/*
+ * XXX This is marked as a 2420-only define, but it claims to be present
+ * on 2430 also. Double-check.
+ */
static struct clk i2c2_ick = {
- .name = "i2c_ick",
+ .name = "i2c2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1745,21 +1544,9 @@
.recalc = &followparent_recalc,
};
-static struct clk i2c2_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 2,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk i2chs2_fck = {
- .name = "i2c_fck",
+ .name = "i2chs2_fck",
.ops = &clkops_omap2430_i2chs_wait,
- .id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1767,10 +1554,13 @@
.recalc = &followparent_recalc,
};
+/*
+ * XXX This is marked as a 2420-only define, but it claims to be present
+ * on 2430 also. Double-check.
+ */
static struct clk i2c1_ick = {
- .name = "i2c_ick",
+ .name = "i2c1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1778,21 +1568,9 @@
.recalc = &followparent_recalc,
};
-static struct clk i2c1_fck = {
- .name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
- .id = 1,
- .parent = &func_12m_ck,
- .clkdm_name = "core_l4_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .recalc = &followparent_recalc,
-};
-
static struct clk i2chs1_fck = {
- .name = "i2c_fck",
+ .name = "i2chs1_fck",
.ops = &clkops_omap2430_i2chs_wait,
- .id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1825,58 +1603,6 @@
.recalc = &followparent_recalc,
};
-static struct clk vlynq_ick = {
- .name = "vlynq_ick",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &core_l3_ck,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
- .recalc = &followparent_recalc,
-};
-
-static const struct clksel_rate vlynq_fck_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate vlynq_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_242X },
- { .div = 2, .val = 2, .flags = RATE_IN_242X },
- { .div = 3, .val = 3, .flags = RATE_IN_242X },
- { .div = 4, .val = 4, .flags = RATE_IN_242X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 9, .val = 9, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
- { .div = 18, .val = 18, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel vlynq_fck_clksel[] = {
- { .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
- { .parent = &core_ck, .rates = vlynq_fck_core_rates },
- { .parent = NULL }
-};
-
-static struct clk vlynq_fck = {
- .name = "vlynq_fck",
- .ops = &clkops_omap2_dflt_wait,
- .parent = &func_96m_ck,
- .flags = DELAYED_APP,
- .clkdm_name = "core_l3_clkdm",
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK,
- .clksel = vlynq_fck_clksel,
- .recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
-};
-
static struct clk sdrc_ick = {
.name = "sdrc_ick",
.ops = &clkops_omap2_dflt_wait,
@@ -1959,7 +1685,7 @@
};
static struct clk mmchs1_ick = {
- .name = "mmchs_ick",
+ .name = "mmchs1_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
@@ -1969,7 +1695,7 @@
};
static struct clk mmchs1_fck = {
- .name = "mmchs_fck",
+ .name = "mmchs1_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
.clkdm_name = "core_l3_clkdm",
@@ -1979,9 +1705,8 @@
};
static struct clk mmchs2_ick = {
- .name = "mmchs_ick",
+ .name = "mmchs2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1990,9 +1715,8 @@
};
static struct clk mmchs2_fck = {
- .name = "mmchs_fck",
+ .name = "mmchs2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_96m_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
@@ -2030,7 +1754,7 @@
};
static struct clk mmchsdb1_fck = {
- .name = "mmchsdb_fck",
+ .name = "mmchsdb1_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
.clkdm_name = "core_l4_clkdm",
@@ -2040,9 +1764,8 @@
};
static struct clk mmchsdb2_fck = {
- .name = "mmchsdb_fck",
+ .name = "mmchsdb2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &func_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -2067,7 +1790,6 @@
static struct clk virt_prcm_set = {
.name = "virt_prcm_set",
.ops = &clkops_null,
- .flags = DELAYED_APP,
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
.recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
.set_rate = &omap2_select_table_rate,
@@ -2079,149 +1801,134 @@
* clkdev integration
*/
-static struct omap_clk omap24xx_clks[] = {
+static struct omap_clk omap2430_clks[] = {
/* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
- CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
- CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
+ CLK(NULL, "osc_ck", &osc_ck, CK_243X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_243X),
+ CLK(NULL, "alt_ck", &alt_ck, CK_243X),
/* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
- CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
- CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
+ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X),
+ CLK(NULL, "apll96_ck", &apll96_ck, CK_243X),
+ CLK(NULL, "apll54_ck", &apll54_ck, CK_243X),
/* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
- CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
- CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
- CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
- CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
- CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
- CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
- CLK(NULL, "emul_ck", &emul_ck, CK_242X),
+ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X),
+ CLK(NULL, "core_ck", &core_ck, CK_243X),
+ CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X),
+ CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X),
+ CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X),
+ CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X),
+ CLK(NULL, "sys_clkout", &sys_clkout, CK_243X),
+ CLK(NULL, "emul_ck", &emul_ck, CK_243X),
/* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_243X),
/* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
- CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
- CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
+ CLK(NULL, "dsp_fck", &dsp_fck, CK_243X),
+ CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X),
CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
- CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
- CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
/* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
- CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X),
+ CLK(NULL, "gfx_ick", &gfx_ick, CK_243X),
/* Modem domain clocks */
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
- CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
- CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
+ CLK("omapdss", "ick", &dss_ick, CK_243X),
+ CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X),
+ CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X),
+ CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X),
/* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X),
/* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
+ CLK(NULL, "l4_ck", &l4_ck, CK_243X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X),
/* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X),
/* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
- CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
- CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
- CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
- CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_243X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_243X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_243X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_243X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_243X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_243X),
+ CLK(NULL, "gpios_ick", &gpios_ick, CK_243X),
+ CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
+ CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
- CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
- CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
- CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
- CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
- CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
- CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
- CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
- CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
- CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
- CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
- CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
- CLK(NULL, "eac_ick", &eac_ick, CK_242X),
- CLK(NULL, "eac_fck", &eac_fck, CK_242X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
- CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
- CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
- CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
+ CLK("omap24xxcam", "fck", &cam_fck, CK_243X),
+ CLK("omap24xxcam", "ick", &cam_ick, CK_243X),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X),
+ CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X),
+ CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_243X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_243X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_243X),
+ CLK(NULL, "fac_fck", &fac_fck, CK_243X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
+ CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X),
CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
- CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
- CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X),
CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
- CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
- CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
- CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
+ CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
+ CLK(NULL, "sdma_ick", &sdma_ick, CK_243X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
- CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
- CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
- CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
- CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
- CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
- CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
+ CLK(NULL, "des_ick", &des_ick, CK_243X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_243X),
+ CLK("omap_rng", "ick", &rng_ick, CK_243X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_243X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_243X),
+ CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
@@ -2238,41 +1945,34 @@
* init code
*/
-int __init omap2_clk_init(void)
+int __init omap2430_clk_init(void)
{
const struct prcm_config *prcm;
struct omap_clk *c;
u32 clkrate;
- u16 cpu_clkflg;
- if (cpu_is_omap242x()) {
- prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_242X;
- cpu_clkflg = CK_242X;
- rate_table = omap2420_rate_table;
- } else if (cpu_is_omap2430()) {
- prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_243X;
- cpu_clkflg = CK_243X;
- rate_table = omap2430_rate_table;
- }
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
+ cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
+ cpu_mask = RATE_IN_243X;
+ rate_table = omap2430_rate_table;
clk_init(&omap2_clk_functions);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
+ c++)
clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
- sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+ sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
- clk_register(c->lk.clk);
- omap2_init_clk_clkdm(c->lk.clk);
- }
+ for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
+ c++) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
+ }
/* Check the MPU rate set by bootloader */
clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
@@ -2288,10 +1988,9 @@
recalculate_root_clocks();
- printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
- (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+ pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
+ (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+ (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
/*
* Only enable those clocks we will need, let the drivers
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 5420356..80bb0f0 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -1,15 +1,15 @@
/*
- * linux/arch/arm/mach-omap2/clock.c
+ * clock2xxx.c - OMAP2xxx-specific clock integration code
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
*
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
*
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,568 +17,28 @@
*/
#undef DEBUG
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
#include <linux/errno.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/bitops.h>
#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/prcm.h>
-#include <plat/clkdev_omap.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
-#include <plat/sdrc.h>
#include "clock.h"
#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED 0
-#define EN_APLL_LOCKED 3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ 0
-#define APLLS_CLKIN_13MHZ 2
-#define APLLS_CLKIN_12MHZ 3
-
-/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
-
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
struct clk *vclk, *sclk, *dclk;
-void __iomem *prcm_clksrc_ctrl;
-
-/*-------------------------------------------------------------------------
+/*
* Omap24xx specific clock functions
- *-------------------------------------------------------------------------*/
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules. No return value.
*/
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit)
-{
- *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
- *idlest_bit = clk->enable_bit;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clkops clkops_omap2430_i2chs_wait = {
- .enable = omap2_dflt_clk_enable,
- .disable = omap2_dflt_clk_disable,
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual). This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
- long long core_clk;
- u32 v;
-
- core_clk = omap2_get_dpll_rate(clk);
-
- v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
- if (v == CORE_CLK_SRC_32K)
- core_clk = 32768;
- else
- core_clk *= v;
-
- return core_clk;
-}
-
-static int omap2_enable_osc_ck(struct clk *clk)
-{
- u32 pcc;
-
- pcc = __raw_readl(prcm_clksrc_ctrl);
-
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
- return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
- u32 pcc;
-
- pcc = __raw_readl(prcm_clksrc_ctrl);
-
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-const struct clkops clkops_oscck = {
- .enable = omap2_enable_osc_ck,
- .disable = omap2_disable_osc_ck,
-};
-
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk *clk)
-{
- u32 div = PRCM_CLKSRC_CTRL;
- div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
- div >>= clk->rate_offset;
- clk->rate = (clk->parent->rate / div);
- propagate_rate(clk);
-}
-#endif /* OLD_CK */
-
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
-{
- u32 cval, apll_mask;
-
- apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
- cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
- if ((cval & apll_mask) == apll_mask)
- return 0; /* apll already enabled */
-
- cval &= ~apll_mask;
- cval |= apll_mask;
- cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
- omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
- clk->name);
-
- /*
- * REVISIT: Should we return an error code if omap2_wait_clock_ready()
- * fails?
- */
- return 0;
-}
-
-static int omap2_clk_apll96_enable(struct clk *clk)
-{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
-}
-
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
-{
- u32 cval;
-
- cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
- cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
- cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-const struct clkops clkops_apll96 = {
- .enable = omap2_clk_apll96_enable,
- .disable = omap2_clk_apll_disable,
-};
-
-const struct clkops clkops_apll54 = {
- .enable = omap2_clk_apll54_enable,
- .disable = omap2_clk_apll_disable,
-};
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
- u32 high, low, core_clk_src;
-
- core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
- if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
- high = curr_prcm_set->dpll_speed * 2;
- low = curr_prcm_set->dpll_speed;
- } else { /* DPLL clockout x 2 */
- high = curr_prcm_set->dpll_speed;
- low = curr_prcm_set->dpll_speed / 2;
- }
-
-#ifdef DOWN_VARIABLE_DPLL
- if (target_rate > high)
- return high;
- else
- return target_rate;
-#else
- if (target_rate > low)
- return high;
- else
- return low;
-#endif
-
-}
-
-unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
- return omap2xxx_clk_get_core_rate(clk);
-}
-
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
- u32 cur_rate, low, mult, div, valid_rate, done_rate;
- u32 bypass = 0;
- struct prcm_config tmpset;
- const struct dpll_data *dd;
-
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
- mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
- if ((rate == (cur_rate / 2)) && (mult == 2)) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
- } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
- } else if (rate != cur_rate) {
- valid_rate = omap2_dpllcore_round_rate(rate);
- if (valid_rate != rate)
- return -EINVAL;
-
- if (mult == 1)
- low = curr_prcm_set->dpll_speed;
- else
- low = curr_prcm_set->dpll_speed / 2;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
- tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
- dd->div1_mask);
- div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
- tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
- if (rate > low) {
- tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
- mult = ((rate / 2) / 1000000);
- done_rate = CORE_CLK_SRC_DPLL_X2;
- } else {
- tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
- mult = (rate / 1000000);
- done_rate = CORE_CLK_SRC_DPLL;
- }
- tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
- tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
- /* Worst case */
- tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
- if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
- bypass = 1;
-
- /* For omap2xxx_sdrc_init_params() */
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
- /* Force dll lock mode */
- omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
- bypass);
-
- /* Errata: ret dll entry state */
- omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
- omap2xxx_sdrc_reprogram(done_rate, 0);
- }
-
- return 0;
-}
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
- return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
- const struct prcm_config *ptr;
- long highest_rate;
- long sys_ck_rate;
-
- sys_ck_rate = clk_get_rate(sclk);
-
- highest_rate = -EINVAL;
-
- for (ptr = rate_table; ptr->mpu_speed; ptr++) {
- if (!(ptr->flags & cpu_mask))
- continue;
- if (ptr->xtal_speed != sys_ck_rate)
- continue;
-
- highest_rate = ptr->mpu_speed;
-
- /* Can check only after xtal frequency check */
- if (ptr->mpu_speed <= rate)
- break;
- }
- return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
- u32 cur_rate, done_rate, bypass = 0, tmp;
- const struct prcm_config *prcm;
- unsigned long found_speed = 0;
- unsigned long flags;
- long sys_ck_rate;
-
- sys_ck_rate = clk_get_rate(sclk);
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
-
- if (prcm->xtal_speed != sys_ck_rate)
- continue;
-
- if (prcm->mpu_speed <= rate) {
- found_speed = prcm->mpu_speed;
- break;
- }
- }
-
- if (!found_speed) {
- printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
- rate / 1000000);
- return -EINVAL;
- }
-
- curr_prcm_set = prcm;
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
-
- if (prcm->dpll_speed == cur_rate / 2) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
- } else if (prcm->dpll_speed == cur_rate * 2) {
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
- } else if (prcm->dpll_speed != cur_rate) {
- local_irq_save(flags);
-
- if (prcm->dpll_speed == prcm->xtal_speed)
- bypass = 1;
-
- if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
- CORE_CLK_SRC_DPLL_X2)
- done_rate = CORE_CLK_SRC_DPLL_X2;
- else
- done_rate = CORE_CLK_SRC_DPLL;
-
- /* MPU divider */
- cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
- /* dsp + iva1 div(2420), iva2.1(2430) */
- cm_write_mod_reg(prcm->cm_clksel_dsp,
- OMAP24XX_DSP_MOD, CM_CLKSEL);
-
- cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
- /* Major subsystem dividers */
- tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
- cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
- CM_CLKSEL1);
-
- if (cpu_is_omap2430())
- cm_write_mod_reg(prcm->cm_clksel_mdm,
- OMAP2430_MDM_MOD, CM_CLKSEL);
-
- /* x2 to enter omap2xxx_sdrc_init_params() */
- omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
- omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
- bypass);
-
- omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
- omap2xxx_sdrc_reprogram(done_rate, 0);
-
- local_irq_restore(flags);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- const struct prcm_config *prcm;
- long sys_ck_rate;
- int i = 0;
- int tbl_sz = 0;
-
- sys_ck_rate = clk_get_rate(sclk);
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck_rate)
- continue;
-
- /* don't put bypass rates in table */
- if (prcm->dpll_speed == prcm->xtal_speed)
- continue;
-
- tbl_sz++;
- }
-
- /*
- * XXX Ensure that we're doing what CPUFreq expects for this error
- * case and the following one
- */
- if (tbl_sz == 0) {
- pr_warning("%s: no matching entries in rate_table\n",
- __func__);
- return;
- }
-
- /* Include the CPUFREQ_TABLE_END terminator entry */
- tbl_sz++;
-
- freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
- GFP_ATOMIC);
- if (!freq_table) {
- pr_err("%s: could not kzalloc frequency table\n", __func__);
- return;
- }
-
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck_rate)
- continue;
-
- /* don't put bypass rates in table */
- if (prcm->dpll_speed == prcm->xtal_speed)
- continue;
-
- freq_table[i].index = i;
- freq_table[i].frequency = prcm->mpu_speed / 1000;
- i++;
- }
-
- freq_table[i].index = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- *table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- kfree(freq_table);
-}
-
-#endif
-
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
- .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
- .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
-#endif
-};
-
-static u32 omap2_get_apll_clkin(void)
-{
- u32 aplls, srate = 0;
-
- aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
- aplls &= OMAP24XX_APLLS_CLKIN_MASK;
- aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
- if (aplls == APLLS_CLKIN_19_2MHZ)
- srate = 19200000;
- else if (aplls == APLLS_CLKIN_13MHZ)
- srate = 13000000;
- else if (aplls == APLLS_CLKIN_12MHZ)
- srate = 12000000;
-
- return srate;
-}
-
-static u32 omap2_get_sysclkdiv(void)
-{
- u32 div;
-
- div = __raw_readl(prcm_clksrc_ctrl);
- div &= OMAP_SYSCLKDIV_MASK;
- div >>= OMAP_SYSCLKDIV_SHIFT;
-
- return div;
-}
-
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
- return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
-unsigned long omap2_sys_clk_recalc(struct clk *clk)
-{
- return clk->parent->rate / omap2_get_sysclkdiv();
-}
/*
* Set clocks for bypass mode for reboot to work.
*/
-void omap2_clk_prepare_for_reboot(void)
+void omap2xxx_clk_prepare_for_reboot(void)
{
u32 rate;
@@ -590,37 +50,24 @@
}
/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
+ * Switch the MPU rate if specified on cmdline. We cannot do this
+ * early until cmdline is parsed. XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
*/
-static int __init omap2_clk_arch_init(void)
+static int __init omap2xxx_clk_arch_init(void)
{
- struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
- unsigned long sys_ck_rate;
+ int ret;
- if (!mpurate)
- return -EINVAL;
+ if (!cpu_is_omap24xx())
+ return 0;
- virt_prcm_set = clk_get(NULL, "virt_prcm_set");
- sys_ck = clk_get(NULL, "sys_ck");
- dpll_ck = clk_get(NULL, "dpll_ck");
- mpu_ck = clk_get(NULL, "mpu_ck");
+ ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
+ if (!ret)
+ omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
- if (clk_set_rate(virt_prcm_set, mpurate))
- printk(KERN_ERR "Could not find matching MPU rate\n");
-
- recalculate_root_clocks();
-
- sys_ck_rate = clk_get_rate(sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
- (clk_get_rate(dpll_ck) / 1000000),
- (clk_get_rate(mpu_ck) / 1000000));
-
- return 0;
+ return ret;
}
-arch_initcall(omap2_clk_arch_init);
+
+arch_initcall(omap2xxx_clk_arch_init);
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index e35efde..6a658b8 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -1,35 +1,38 @@
/*
* OMAP2 clock function prototypes and macros
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2005-2010 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
unsigned long omap2_table_mpu_recalc(struct clk *clk);
int omap2_select_table_rate(struct clk *clk, unsigned long rate);
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
unsigned long omap2_osc_clk_recalc(struct clk *clk);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+u32 omap2xxx_get_apll_clkin(void);
+u32 omap2xxx_get_sysclkdiv(void);
+void omap2xxx_clk_prepare_for_reboot(void);
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+int omap2420_clk_init(void);
#else
-#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#define omap2420_clk_init() 0
#endif
-extern void __iomem *prcm_clksrc_ctrl;
+#ifdef CONFIG_ARCH_OMAP2430
+int omap2430_clk_init(void);
+#else
+#define omap2430_clk_init() 0
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
extern struct clk *dclk;
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d4217b9..6febd5f 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,13 +2,14 @@
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
*
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Paul Walmsley
+ * Jouni Högander
*
* Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,49 +17,23 @@
*/
#undef DEBUG
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
#include "clock.h"
#include "clock34xx.h"
-#include "sdrc.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
-#define CYCLES_PER_MHZ 1000000
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -66,13 +41,15 @@
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_ssi_wait = {
@@ -87,6 +64,7 @@
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* Some OMAP modules on OMAP3 ES2+ chips have both initiator and
* target IDLEST bits. For our purposes, we are concerned with the
@@ -97,7 +75,8 @@
*/
static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
@@ -105,6 +84,7 @@
*idlest_reg = (__force void __iomem *)r;
/* USBHOST_IDLE has same shift */
*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
@@ -119,6 +99,7 @@
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
@@ -126,13 +107,15 @@
*/
static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
- u8 *idlest_bit)
+ u8 *idlest_bit,
+ u8 *idlest_val)
{
u32 r;
r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
*idlest_reg = (__force void __iomem *)r;
*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_hsotgusb_wait = {
@@ -141,213 +124,3 @@
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
-
-const struct clkops clkops_noncore_dpll_ops = {
- .enable = omap3_noncore_dpll_enable,
- .disable = omap3_noncore_dpll_disable,
-};
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (omap_rev() == OMAP3430_REV_ES1_0) {
- printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
- "silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
- return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-
-/*
- * CORE DPLL (DPLL3) rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate. Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 new_div = 0;
- u32 unlock_dll = 0;
- u32 c;
- unsigned long validrate, sdrcrate, _mpurate;
- struct omap_sdrc_params *sdrc_cs0;
- struct omap_sdrc_params *sdrc_cs1;
- int ret;
-
- if (!clk || !rate)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- sdrcrate = sdrc_ick_p->rate;
- if (rate > clk->rate)
- sdrcrate <<= ((rate / clk->rate) >> 1);
- else
- sdrcrate >>= ((clk->rate / rate) >> 1);
-
- ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
- if (ret)
- return -EINVAL;
-
- if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
- pr_debug("clock: will unlock SDRC DLL\n");
- unlock_dll = 1;
- }
-
- /*
- * XXX This only needs to be done when the CPU frequency changes
- */
- _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
- c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
- c += 1; /* for safety */
- c *= SDRC_MPURATE_LOOPS;
- c >>= SDRC_MPURATE_SCALE;
- if (c == 0)
- c = 1;
-
- pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_debug("clock: SDRC CS0 timing params used:"
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
- if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: "
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
- if (sdrc_cs1)
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- else
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clk->rate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- 0, 0, 0, 0);
-
- return 0;
-}
-
-/* Common clock code */
-
-/*
- * As it is structured now, this will prevent an OMAP2/3 multiboot
- * kernel from compiling. This will need further attention.
- */
-#if defined(CONFIG_ARCH_OMAP3)
-
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
-};
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
- /* REVISIT: Not ready for 343x */
-#if 0
- u32 rate;
-
- if (vclk == NULL || sclk == NULL)
- return;
-
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate);
-#endif
-}
-
-void omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_enable(dpll5_clk);
-
- /* Enable autoidle to allow it to enter low power bypass */
- omap3_dpll_allow_idle(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable(dpll5_m2_clk);
- clk_disable(dpll5_clk);
- return;
-}
-
-/* REVISIT: Move this init stuff out into clock.c */
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
- struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
- unsigned long osc_sys_rate;
-
- if (!mpurate)
- return -EINVAL;
-
- /* XXX test these for success */
- dpll1_ck = clk_get(NULL, "dpll1_ck");
- arm_fck = clk_get(NULL, "arm_fck");
- core_ck = clk_get(NULL, "core_ck");
- osc_sys_ck = clk_get(NULL, "osc_sys_ck");
-
- /* REVISIT: not yet ready for 343x */
- if (clk_set_rate(dpll1_ck, mpurate))
- printk(KERN_ERR "*** Unable to set MPU rate\n");
-
- recalculate_root_clocks();
-
- osc_sys_rate = clk_get_rate(osc_sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (osc_sys_rate / 1000000),
- ((osc_sys_rate / 100000) % 10),
- (clk_get_rate(core_ck) / 1000000),
- (clk_get_rate(arm_fck) / 1000000));
-
- calibrate_delay();
-
- return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9a2c07e..628e8de 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,24 +1,15 @@
/*
- * OMAP3 clock function prototypes and macros
+ * OMAP34xx clock function prototypes and macros
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-void omap3_clk_lock_dpll5(void);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-/* OMAP34xx-specific clkops */
extern const struct clkops clkops_omap3430es2_ssi_wait;
extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_noncore_dpll_ops;
#endif
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
new file mode 100644
index 0000000..b496a93
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -0,0 +1,124 @@
+/*
+ * OMAP3517/3505-specific clock framework functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Ranjith Lohithakshan
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3517.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
new file mode 100644
index 0000000..ca5e5a6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.h
@@ -0,0 +1,14 @@
+/*
+ * OMAP3517/3505 clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
new file mode 100644
index 0000000..0c5e25e
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -0,0 +1,72 @@
+/*
+ * OMAP36xx-specific clkops
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Mike Turquette
+ * Vijaykumar GN
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock36xx.h"
+
+
+/**
+ * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
+ * from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set. Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
+{
+ u32 dummy_v, orig_v, clksel_shift;
+ int ret;
+
+ /* Clear PWRDN bit of HSDIVIDER */
+ ret = omap2_dflt_clk_enable(clk);
+
+ /* Restore the dividers */
+ if (!ret) {
+ clksel_shift = __ffs(clk->parent->clksel_mask);
+ orig_v = __raw_readl(clk->parent->clksel_reg);
+ dummy_v = orig_v;
+
+ /* Write any other value different from the Read value */
+ dummy_v ^= (1 << clksel_shift);
+ __raw_writel(dummy_v, clk->parent->clksel_reg);
+
+ /* Write the original divider */
+ __raw_writel(orig_v, clk->parent->clksel_reg);
+ }
+
+ return ret;
+}
+
+const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
+ .enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
+ .disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+};
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
new file mode 100644
index 0000000..a7dee5b
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.h
@@ -0,0 +1,13 @@
+/*
+ * OMAP36xx clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+
+extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
new file mode 100644
index 0000000..a447c4d
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -0,0 +1,104 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ pr_err("clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_enable(dpll5_clk);
+
+ /* Enable autoidle to allow it to enter low power bypass */
+ omap3_dpll_allow_idle(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable(dpll5_m2_clk);
+ clk_disable(dpll5_clk);
+ return;
+}
+
+/* Common clock code */
+
+/*
+ * Switch the MPU rate if specified on cmdline. We cannot do this
+ * early until cmdline is parsed. XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
+ */
+static int __init omap3xxx_clk_arch_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
+ if (!ret)
+ omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck");
+
+ return ret;
+}
+
+arch_initcall(omap3xxx_clk_arch_init);
+
+
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
new file mode 100644
index 0000000..8bbeeaf
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -0,0 +1,21 @@
+/*
+ * OMAP3-common clock function prototypes and macros
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+
+int omap3xxx_clk_init(void);
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
+
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
similarity index 79%
rename from arch/arm/mach-omap2/clock34xx_data.c
rename to arch/arm/mach-omap2/clock3xxx_data.c
index 74930e3..d5153b6 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -1,8 +1,8 @@
/*
* OMAP3 clock data
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
*
* Written by Paul Walmsley
* With many device clock fixes by Kevin Hilman and Jouni Högander
@@ -16,15 +16,19 @@
* to be requested from drivers directly.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/list.h>
#include <plat/control.h>
#include <plat/clkdev_omap.h>
#include "clock.h"
+#include "clock3xxx.h"
#include "clock34xx.h"
+#include "clock36xx.h"
+#include "clock3517.h"
+
#include "cm.h"
#include "cm-regbits-34xx.h"
#include "prm.h"
@@ -37,7 +41,8 @@
#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
/* Maximum DPLL multiplier, divider values for OMAP3 */
-#define OMAP3_MAX_DPLL_MULT 2048
+#define OMAP3_MAX_DPLL_MULT 2047
+#define OMAP3630_MAX_JTYPE_DPLL_MULT 4095
#define OMAP3_MAX_DPLL_DIV 128
/*
@@ -59,14 +64,12 @@
.name = "omap_32k_fck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED,
};
static struct clk secure_32k_fck = {
.name = "secure_32k_fck",
.ops = &clkops_null,
.rate = 32768,
- .flags = RATE_FIXED,
};
/* Virtual source clocks for osc_sys_ck */
@@ -74,42 +77,36 @@
.name = "virt_12m_ck",
.ops = &clkops_null,
.rate = 12000000,
- .flags = RATE_FIXED,
};
static struct clk virt_13m_ck = {
.name = "virt_13m_ck",
.ops = &clkops_null,
.rate = 13000000,
- .flags = RATE_FIXED,
};
static struct clk virt_16_8m_ck = {
.name = "virt_16_8m_ck",
.ops = &clkops_null,
.rate = 16800000,
- .flags = RATE_FIXED,
};
static struct clk virt_19_2m_ck = {
.name = "virt_19_2m_ck",
.ops = &clkops_null,
.rate = 19200000,
- .flags = RATE_FIXED,
};
static struct clk virt_26m_ck = {
.name = "virt_26m_ck",
.ops = &clkops_null,
.rate = 26000000,
- .flags = RATE_FIXED,
};
static struct clk virt_38_4m_ck = {
.name = "virt_38_4m_ck",
.ops = &clkops_null,
.rate = 38400000,
- .flags = RATE_FIXED,
};
static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -162,7 +159,6 @@
.clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK,
.clksel = osc_sys_clksel,
/* REVISIT: deal with autoextclkmode? */
- .flags = RATE_FIXED,
.recalc = &omap2_clksel_recalc,
};
@@ -236,6 +232,42 @@
{ .div = 0 }
};
+static const struct clksel_rate div32_dpll4_rates_3630[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_36XX },
+ { .div = 3, .val = 3, .flags = RATE_IN_36XX },
+ { .div = 4, .val = 4, .flags = RATE_IN_36XX },
+ { .div = 5, .val = 5, .flags = RATE_IN_36XX },
+ { .div = 6, .val = 6, .flags = RATE_IN_36XX },
+ { .div = 7, .val = 7, .flags = RATE_IN_36XX },
+ { .div = 8, .val = 8, .flags = RATE_IN_36XX },
+ { .div = 9, .val = 9, .flags = RATE_IN_36XX },
+ { .div = 10, .val = 10, .flags = RATE_IN_36XX },
+ { .div = 11, .val = 11, .flags = RATE_IN_36XX },
+ { .div = 12, .val = 12, .flags = RATE_IN_36XX },
+ { .div = 13, .val = 13, .flags = RATE_IN_36XX },
+ { .div = 14, .val = 14, .flags = RATE_IN_36XX },
+ { .div = 15, .val = 15, .flags = RATE_IN_36XX },
+ { .div = 16, .val = 16, .flags = RATE_IN_36XX },
+ { .div = 17, .val = 17, .flags = RATE_IN_36XX },
+ { .div = 18, .val = 18, .flags = RATE_IN_36XX },
+ { .div = 19, .val = 19, .flags = RATE_IN_36XX },
+ { .div = 20, .val = 20, .flags = RATE_IN_36XX },
+ { .div = 21, .val = 21, .flags = RATE_IN_36XX },
+ { .div = 22, .val = 22, .flags = RATE_IN_36XX },
+ { .div = 23, .val = 23, .flags = RATE_IN_36XX },
+ { .div = 24, .val = 24, .flags = RATE_IN_36XX },
+ { .div = 25, .val = 25, .flags = RATE_IN_36XX },
+ { .div = 26, .val = 26, .flags = RATE_IN_36XX },
+ { .div = 27, .val = 27, .flags = RATE_IN_36XX },
+ { .div = 28, .val = 28, .flags = RATE_IN_36XX },
+ { .div = 29, .val = 29, .flags = RATE_IN_36XX },
+ { .div = 30, .val = 30, .flags = RATE_IN_36XX },
+ { .div = 31, .val = 31, .flags = RATE_IN_36XX },
+ { .div = 32, .val = 32, .flags = RATE_IN_36XX },
+ { .div = 0 }
+};
+
/* DPLL1 */
/* MPU clock source */
/* Type: DPLL */
@@ -337,7 +369,7 @@
static struct clk dpll2_ck = {
.name = "dpll2_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -529,7 +561,8 @@
/* DPLL4 */
/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
/* Type: DPLL */
-static struct dpll_data dpll4_dd = {
+static struct dpll_data dpll4_dd;
+static struct dpll_data dpll4_dd_34xx __initdata = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
@@ -552,9 +585,32 @@
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
+static struct dpll_data dpll4_dd_3630 __initdata = {
+ .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+ .mult_mask = OMAP3630_PERIPH_DPLL_MULT_MASK,
+ .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+ .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
+ .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+ .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+ .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+ .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT,
+ .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+ .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+ .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK,
+ .max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
+ .min_divider = 1,
+ .max_divider = OMAP3_MAX_DPLL_DIV,
+ .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE,
+ .flags = DPLL_J_TYPE
+};
+
static struct clk dpll4_ck = {
.name = "dpll4_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -581,8 +637,15 @@
{ .parent = NULL }
};
+static const struct clksel div32_dpll4_clksel[] = {
+ { .parent = &dpll4_ck, .rates = div32_dpll4_rates_3630 },
+ { .parent = NULL }
+};
+
/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck = {
+static struct clk dpll4_m2_ck;
+
+static struct clk dpll4_m2_ck_34xx __initdata = {
.name = "dpll4_m2_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
@@ -594,6 +657,18 @@
.recalc = &omap2_clksel_recalc,
};
+static struct clk dpll4_m2_ck_3630 __initdata = {
+ .name = "dpll4_m2_ck",
+ .ops = &clkops_null,
+ .parent = &dpll4_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+ .clksel_mask = OMAP3630_DIV_96M_MASK,
+ .clksel = div32_dpll4_clksel,
+ .clkdm_name = "dpll4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m2x2_ck = {
.name = "dpll4_m2x2_ck",
@@ -612,18 +687,24 @@
* 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
* CM_96K_(F)CLK.
*/
-static struct clk omap_96m_alwon_fck = {
- .name = "omap_96m_alwon_fck",
+
+/* Adding 192MHz Clock node needed by SGX */
+static struct clk omap_192m_alwon_fck = {
+ .name = "omap_192m_alwon_fck",
.ops = &clkops_null,
.parent = &dpll4_m2x2_ck,
.recalc = &followparent_recalc,
};
-static struct clk cm_96m_fck = {
- .name = "cm_96m_fck",
- .ops = &clkops_null,
- .parent = &omap_96m_alwon_fck,
- .recalc = &followparent_recalc,
+static const struct clksel_rate omap_96m_alwon_fck_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_36XX },
+ { .div = 2, .val = 2, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 0 }
+};
+
+static const struct clksel omap_96m_alwon_fck_clksel[] = {
+ { .parent = &omap_192m_alwon_fck, .rates = omap_96m_alwon_fck_rates },
+ { .parent = NULL }
};
static const struct clksel_rate omap_96m_dpll_rates[] = {
@@ -636,6 +717,31 @@
{ .div = 0 }
};
+static struct clk omap_96m_alwon_fck = {
+ .name = "omap_96m_alwon_fck",
+ .ops = &clkops_null,
+ .parent = &dpll4_m2x2_ck,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk omap_96m_alwon_fck_3630 = {
+ .name = "omap_96m_alwon_fck",
+ .parent = &omap_192m_alwon_fck,
+ .init = &omap2_init_clksel_parent,
+ .ops = &clkops_null,
+ .recalc = &omap2_clksel_recalc,
+ .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3630_CLKSEL_96M_MASK,
+ .clksel = omap_96m_alwon_fck_clksel
+};
+
+static struct clk cm_96m_fck = {
+ .name = "cm_96m_fck",
+ .ops = &clkops_null,
+ .parent = &omap_96m_alwon_fck,
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel omap_96m_fck_clksel[] = {
{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
{ .parent = &sys_ck, .rates = omap_96m_sys_rates },
@@ -654,7 +760,9 @@
};
/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck = {
+static struct clk dpll4_m3_ck;
+
+static struct clk dpll4_m3_ck_34xx __initdata = {
.name = "dpll4_m3_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
@@ -666,6 +774,18 @@
.recalc = &omap2_clksel_recalc,
};
+static struct clk dpll4_m3_ck_3630 __initdata = {
+ .name = "dpll4_m3_ck",
+ .ops = &clkops_null,
+ .parent = &dpll4_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3630_CLKSEL_TV_MASK,
+ .clksel = div32_dpll4_clksel,
+ .clkdm_name = "dpll4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m3x2_ck = {
.name = "dpll4_m3x2_ck",
@@ -735,11 +855,13 @@
.ops = &clkops_null,
.parent = &omap_48m_fck,
.fixed_div = 4,
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck = {
+static struct clk dpll4_m4_ck;
+
+static struct clk dpll4_m4_ck_34xx __initdata = {
.name = "dpll4_m4_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
@@ -753,6 +875,20 @@
.round_rate = &omap2_clksel_round_rate,
};
+static struct clk dpll4_m4_ck_3630 __initdata = {
+ .name = "dpll4_m4_ck",
+ .ops = &clkops_null,
+ .parent = &dpll4_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK,
+ .clksel = div32_dpll4_clksel,
+ .clkdm_name = "dpll4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
+};
+
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m4x2_ck = {
.name = "dpll4_m4x2_ck",
@@ -766,7 +902,9 @@
};
/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck = {
+static struct clk dpll4_m5_ck;
+
+static struct clk dpll4_m5_ck_34xx __initdata = {
.name = "dpll4_m5_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
@@ -780,6 +918,20 @@
.recalc = &omap2_clksel_recalc,
};
+static struct clk dpll4_m5_ck_3630 __initdata = {
+ .name = "dpll4_m5_ck",
+ .ops = &clkops_null,
+ .parent = &dpll4_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3630_CLKSEL_CAM_MASK,
+ .clksel = div32_dpll4_clksel,
+ .clkdm_name = "dpll4_clkdm",
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
+ .recalc = &omap2_clksel_recalc,
+};
+
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m5x2_ck = {
.name = "dpll4_m5x2_ck",
@@ -793,7 +945,9 @@
};
/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck = {
+static struct clk dpll4_m6_ck;
+
+static struct clk dpll4_m6_ck_34xx __initdata = {
.name = "dpll4_m6_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
@@ -805,6 +959,18 @@
.recalc = &omap2_clksel_recalc,
};
+static struct clk dpll4_m6_ck_3630 __initdata = {
+ .name = "dpll4_m6_ck",
+ .ops = &clkops_null,
+ .parent = &dpll4_ck,
+ .init = &omap2_init_clksel_parent,
+ .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+ .clksel_mask = OMAP3630_DIV_DPLL4_MASK,
+ .clksel = div32_dpll4_clksel,
+ .clkdm_name = "dpll4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m6x2_ck = {
.name = "dpll4_m6x2_ck",
@@ -854,7 +1020,7 @@
static struct clk dpll5_ck = {
.name = "dpll5_ck",
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
.round_rate = &omap2_dpll_round_rate,
@@ -1166,12 +1332,24 @@
/* SGX power domain - 3430ES2 only */
static const struct clksel_rate sgx_core_rates[] = {
+ { .div = 2, .val = 5, .flags = RATE_IN_36XX },
{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 4, .val = 1, .flags = RATE_IN_343X },
{ .div = 6, .val = 2, .flags = RATE_IN_343X },
{ .div = 0 },
};
+static const struct clksel_rate sgx_192m_rates[] = {
+ { .div = 1, .val = 4, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 0 },
+};
+
+static const struct clksel_rate sgx_corex2_rates[] = {
+ { .div = 3, .val = 6, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 5, .val = 7, .flags = RATE_IN_36XX },
+ { .div = 0 },
+};
+
static const struct clksel_rate sgx_96m_rates[] = {
{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 },
@@ -1180,7 +1358,9 @@
static const struct clksel sgx_clksel[] = {
{ .parent = &core_ck, .rates = sgx_core_rates },
{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
- { .parent = NULL },
+ { .parent = &omap_192m_alwon_fck, .rates = sgx_192m_rates },
+ { .parent = &corex2_fck, .rates = sgx_corex2_rates },
+ { .parent = NULL }
};
static struct clk sgx_fck = {
@@ -1194,6 +1374,8 @@
.clksel = sgx_clksel,
.clkdm_name = "sgx_clkdm",
.recalc = &omap2_clksel_recalc,
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate
};
static struct clk sgx_ick = {
@@ -1320,9 +1502,8 @@
};
static struct clk mmchs3_fck = {
- .name = "mmchs_fck",
+ .name = "mmchs3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1331,9 +1512,8 @@
};
static struct clk mmchs2_fck = {
- .name = "mmchs_fck",
+ .name = "mmchs2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
@@ -1352,7 +1532,7 @@
};
static struct clk mmchs1_fck = {
- .name = "mmchs_fck",
+ .name = "mmchs1_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1362,9 +1542,8 @@
};
static struct clk i2c3_fck = {
- .name = "i2c_fck",
+ .name = "i2c3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
@@ -1373,9 +1552,8 @@
};
static struct clk i2c2_fck = {
- .name = "i2c_fck",
+ .name = "i2c2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
@@ -1384,9 +1562,8 @@
};
static struct clk i2c1_fck = {
- .name = "i2c_fck",
+ .name = "i2c1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
@@ -1415,9 +1592,8 @@
};
static struct clk mcbsp5_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp5_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 5,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1429,9 +1605,8 @@
};
static struct clk mcbsp1_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
@@ -1453,9 +1628,8 @@
};
static struct clk mcspi4_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi4_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
@@ -1463,9 +1637,8 @@
};
static struct clk mcspi3_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
@@ -1473,9 +1646,8 @@
};
static struct clk mcspi2_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
@@ -1483,9 +1655,8 @@
};
static struct clk mcspi1_fck = {
- .name = "mcspi_fck",
+ .name = "mcspi1_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
@@ -1588,7 +1759,7 @@
.ops = &clkops_null,
.parent = &ssi_ssr_fck_3430es1,
.fixed_div = 2,
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
static struct clk ssi_sst_fck_3430es2 = {
@@ -1596,7 +1767,7 @@
.ops = &clkops_null,
.parent = &ssi_ssr_fck_3430es2,
.fixed_div = 2,
- .recalc = &omap2_fixed_divisor_recalc,
+ .recalc = &omap_fixed_divisor_recalc,
};
@@ -1694,9 +1865,8 @@
};
static struct clk mmchs3_ick = {
- .name = "mmchs_ick",
+ .name = "mmchs3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1746,9 +1916,8 @@
};
static struct clk mmchs2_ick = {
- .name = "mmchs_ick",
+ .name = "mmchs2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
@@ -1757,7 +1926,7 @@
};
static struct clk mmchs1_ick = {
- .name = "mmchs_ick",
+ .name = "mmchs1_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1787,9 +1956,8 @@
};
static struct clk mcspi4_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi4_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
@@ -1798,9 +1966,8 @@
};
static struct clk mcspi3_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
@@ -1809,9 +1976,8 @@
};
static struct clk mcspi2_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
@@ -1820,9 +1986,8 @@
};
static struct clk mcspi1_ick = {
- .name = "mcspi_ick",
+ .name = "mcspi1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
@@ -1831,9 +1996,8 @@
};
static struct clk i2c3_ick = {
- .name = "i2c_ick",
+ .name = "i2c3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
@@ -1842,9 +2006,8 @@
};
static struct clk i2c2_ick = {
- .name = "i2c_ick",
+ .name = "i2c2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
@@ -1853,9 +2016,8 @@
};
static struct clk i2c1_ick = {
- .name = "i2c_ick",
+ .name = "i2c1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
@@ -1904,9 +2066,8 @@
};
static struct clk mcbsp5_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp5_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 5,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
@@ -1915,9 +2076,8 @@
};
static struct clk mcbsp1_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp1_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
@@ -2712,9 +2872,8 @@
};
static struct clk mcbsp2_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp2_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2723,9 +2882,8 @@
};
static struct clk mcbsp3_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp3_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2734,9 +2892,8 @@
};
static struct clk mcbsp4_ick = {
- .name = "mcbsp_ick",
+ .name = "mcbsp4_ick",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
@@ -2751,9 +2908,8 @@
};
static struct clk mcbsp2_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp2_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 2,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
@@ -2765,9 +2921,8 @@
};
static struct clk mcbsp3_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp3_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 3,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
@@ -2779,9 +2934,8 @@
};
static struct clk mcbsp4_fck = {
- .name = "mcbsp_fck",
+ .name = "mcbsp4_fck",
.ops = &clkops_omap2_dflt_wait,
- .id = 4,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
@@ -2983,144 +3137,251 @@
.recalc = &followparent_recalc,
};
+/* Clocks for AM35XX */
+static struct clk ipss_ick = {
+ .name = "ipss_ick",
+ .ops = &clkops_am35xx_ipss_wait,
+ .parent = &core_l3_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_IPSS_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk emac_ick = {
+ .name = "emac_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk rmii_ck = {
+ .name = "rmii_ck",
+ .ops = &clkops_null,
+ .rate = 50000000,
+};
+
+static struct clk emac_fck = {
+ .name = "emac_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &rmii_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_CPGMAC_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_am35xx = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_fck_am35xx = {
+ .name = "hsotgusb_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_USBOTG_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hecc_ck = {
+ .name = "hecc_ck",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &sys_ck,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_HECC_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk vpfe_ick = {
+ .name = "vpfe_ick",
+ .ops = &clkops_am35xx_ipss_module_wait,
+ .parent = &ipss_ick,
+ .clkdm_name = "core_l3_clkdm",
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_VBUSP_CLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+static struct clk pclk_ck = {
+ .name = "pclk_ck",
+ .ops = &clkops_null,
+ .rate = 27000000,
+};
+
+static struct clk vpfe_fck = {
+ .name = "vpfe_fck",
+ .ops = &clkops_omap2_dflt,
+ .parent = &pclk_ck,
+ .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+ .enable_bit = AM35XX_VPFE_FCLK_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
+/*
+ * The UART1/2 functional clock acts as the functional
+ * clock for UART4. No separate fclk control available.
+ */
+static struct clk uart4_ick_am35xx = {
+ .name = "uart4_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = AM35XX_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/*
* clkdev
*/
-static struct omap_clk omap34xx_clks[] = {
- CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X),
- CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X),
- CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X),
- CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
- CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
- CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X),
- CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
- CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X),
- CLK(NULL, "sys_ck", &sys_ck, CK_343X),
- CLK(NULL, "sys_altclk", &sys_altclk, CK_343X),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X),
- CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X),
- CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X),
- CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X),
- CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+/* XXX At some point we should rename this file to clock3xxx_data.c */
+static struct omap_clk omap3xxx_clks[] = {
+ CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX),
+ CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX),
+ CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX),
+ CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX),
+ CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_3XXX),
+ CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
+ CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
+ CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
+ CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
+ CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX),
+ CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX),
+ CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_3XXX),
+ CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX),
CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X),
CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X),
- CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X),
- CLK(NULL, "core_ck", &core_ck, CK_343X),
- CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X),
- CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X),
- CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
- CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X),
- CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
- CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
- CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X),
- CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X),
- CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
- CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X),
- CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X),
- CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X),
- CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X),
- CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X),
- CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X),
- CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
- CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X),
- CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
- CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X),
- CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
- CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X),
- CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
- CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X),
- CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
- CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
- CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2),
- CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2),
- CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X),
- CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X),
- CLK(NULL, "corex2_fck", &corex2_fck, CK_343X),
- CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X),
- CLK(NULL, "mpu_ck", &mpu_ck, CK_343X),
- CLK(NULL, "arm_fck", &arm_fck, CK_343X),
- CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+ CLK(NULL, "dpll3_ck", &dpll3_ck, CK_3XXX),
+ CLK(NULL, "core_ck", &core_ck, CK_3XXX),
+ CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_3XXX),
+ CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_3XXX),
+ CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
+ CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX),
+ CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+ CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
+ CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX),
+ CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX),
+ CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
+ CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+ CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX),
+ CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX),
+ CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX),
+ CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_3XXX),
+ CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_3XXX),
+ CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX),
+ CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+ CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
+ CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_3XXX),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_3XXX),
+ CLK(NULL, "corex2_fck", &corex2_fck, CK_3XXX),
+ CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX),
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX),
+ CLK(NULL, "arm_fck", &arm_fck, CK_3XXX),
+ CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X),
CLK(NULL, "iva2_ck", &iva2_ck, CK_343X),
- CLK(NULL, "l3_ick", &l3_ick, CK_343X),
- CLK(NULL, "l4_ick", &l4_ick, CK_343X),
- CLK(NULL, "rm_ick", &rm_ick, CK_343X),
+ CLK(NULL, "l3_ick", &l3_ick, CK_3XXX),
+ CLK(NULL, "l4_ick", &l4_ick, CK_3XXX),
+ CLK(NULL, "rm_ick", &rm_ick, CK_3XXX),
CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1),
CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1),
CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1),
CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1),
CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1),
- CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
- CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
+ CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2 | CK_3517),
+ CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2 | CK_3517),
CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
CLK(NULL, "modem_fck", &modem_fck, CK_343X),
CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X),
CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X),
- CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
- CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
- CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
- CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2),
- CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2),
- CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X),
- CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2),
- CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_3XXX),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_3XXX),
+ CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
+ CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2 | CK_AM35XX),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_3XXX),
CLK(NULL, "mspro_fck", &mspro_fck, CK_343X),
- CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X),
- CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X),
- CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X),
- CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X),
- CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X),
- CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X),
- CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X),
- CLK(NULL, "uart2_fck", &uart2_fck, CK_343X),
- CLK(NULL, "uart1_fck", &uart1_fck, CK_343X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_3XXX),
+ CLK("i2c_omap.3", "fck", &i2c3_fck, CK_3XXX),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_3XXX),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_3XXX),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_3XXX),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_3XXX),
+ CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX),
+ CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_3XXX),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_3XXX),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_3XXX),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_3XXX),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX),
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
- CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
- CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
+ CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX),
+ CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
- CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
+ CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
- CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
- CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
CLK(NULL, "pka_ick", &pka_ick, CK_343X),
- CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X),
- CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2),
- CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2),
+ CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX),
+ CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX),
+ CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX),
CLK(NULL, "icr_ick", &icr_ick, CK_343X),
CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
CLK(NULL, "sha12_ick", &sha12_ick, CK_343X),
CLK(NULL, "des2_ick", &des2_ick, CK_343X),
- CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X),
- CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_3XXX),
CLK(NULL, "mspro_ick", &mspro_ick, CK_343X),
- CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X),
- CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X),
- CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X),
- CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X),
- CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X),
- CLK(NULL, "uart2_ick", &uart2_ick, CK_343X),
- CLK(NULL, "uart1_ick", &uart1_ick, CK_343X),
- CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X),
- CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX),
+ CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX),
+ CLK("i2c_omap.3", "ick", &i2c3_ick, CK_3XXX),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_3XXX),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_3XXX),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX),
CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1),
CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2),
@@ -3131,96 +3392,111 @@
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
- CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
- CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X),
- CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X),
- CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X),
+ CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2 | CK_AM35XX),
+ CLK("omapdss", "tv_fck", &dss_tv_fck, CK_3XXX),
+ CLK("omapdss", "video_fck", &dss_96m_fck, CK_3XXX),
+ CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_3XXX),
CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1),
- CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2),
+ CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2 | CK_AM35XX),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
- CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
- CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
- CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2),
+ CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2 | CK_AM35XX),
+ CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2 | CK_AM35XX),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2),
- CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X),
- CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X),
- CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X),
- CLK("omap_wdt", "fck", &wdt2_fck, CK_343X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
+ CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX),
+ CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX),
+ CLK("omap_wdt", "fck", &wdt2_fck, CK_3XXX),
CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X),
CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2),
- CLK("omap_wdt", "ick", &wdt2_ick, CK_343X),
- CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X),
- CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X),
- CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
- CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X),
- CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X),
- CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X),
- CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X),
- CLK(NULL, "uart3_fck", &uart3_fck, CK_343X),
- CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X),
- CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X),
- CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X),
- CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X),
- CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X),
- CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X),
- CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X),
- CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X),
- CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
- CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X),
- CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X),
- CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X),
- CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X),
- CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X),
- CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X),
- CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X),
- CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X),
- CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X),
- CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X),
- CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X),
- CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X),
- CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X),
- CLK(NULL, "uart3_ick", &uart3_ick, CK_343X),
- CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X),
- CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X),
- CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X),
- CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X),
- CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X),
- CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X),
- CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X),
- CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X),
- CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X),
- CLK(NULL, "pclk_fck", &pclk_fck, CK_343X),
- CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X),
- CLK(NULL, "atclk_fck", &atclk_fck, CK_343X),
- CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X),
- CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X),
+ CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX),
+ CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX),
+ CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX),
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX),
+ CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
+ CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_3XXX),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_3XXX),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_3XXX),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_3XXX),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_3XXX),
+ CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX),
+ CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_3XXX),
+ CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_3XXX),
+ CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_3XXX),
+ CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_3XXX),
+ CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_3XXX),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_3XXX),
+ CLK(NULL, "per_l4_ick", &per_l4_ick, CK_3XXX),
+ CLK(NULL, "gpio6_ick", &gpio6_ick, CK_3XXX),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_3XXX),
+ CLK(NULL, "gpio4_ick", &gpio4_ick, CK_3XXX),
+ CLK(NULL, "gpio3_ick", &gpio3_ick, CK_3XXX),
+ CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_3XXX),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_3XXX),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_3XXX),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_3XXX),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_3XXX),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_3XXX),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_3XXX),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_3XXX),
+ CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX),
+ CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX),
+ CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX),
+ CLK(NULL, "atclk_fck", &atclk_fck, CK_3XXX),
+ CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
+ CLK(NULL, "traceclk_fck", &traceclk_fck, CK_3XXX),
CLK(NULL, "sr1_fck", &sr1_fck, CK_343X),
CLK(NULL, "sr2_fck", &sr2_fck, CK_343X),
CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X),
- CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X),
- CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X),
- CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X),
+ CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX),
+ CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX),
+ CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
+ CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
+ CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
+ CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX),
+ CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX),
+ CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
+ CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK("musb_hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
+ CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
-int __init omap2_clk_init(void)
+int __init omap3xxx_clk_init(void)
{
- /* struct prcm_config *prcm; */
struct omap_clk *c;
- /* u32 clkrate; */
- u32 cpu_clkflg;
+ u32 cpu_clkflg = CK_3XXX;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap3517()) {
+ cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
+ cpu_clkflg |= CK_3517;
+ } else if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
+ cpu_clkflg |= CK_3505;
+ } else if (cpu_is_omap34xx()) {
cpu_mask = RATE_IN_343X;
- cpu_clkflg = CK_343X;
+ cpu_clkflg |= CK_343X;
/*
* Update this if there are further clock changes between ES2
@@ -3234,34 +3510,70 @@
cpu_clkflg |= CK_3430ES2;
}
}
+ if (omap3_has_192mhz_clk())
+ omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
+
+ if (cpu_is_omap3630()) {
+ cpu_mask |= RATE_IN_36XX;
+ cpu_clkflg |= CK_36XX;
+
+ /*
+ * XXX This type of dynamic rewriting of the clock tree is
+ * deprecated and should be revised soon.
+ */
+ dpll4_m2_ck = dpll4_m2_ck_3630;
+ dpll4_m3_ck = dpll4_m3_ck_3630;
+ dpll4_m4_ck = dpll4_m4_ck_3630;
+ dpll4_m5_ck = dpll4_m5_ck_3630;
+ dpll4_m6_ck = dpll4_m6_ck_3630;
+
+ /*
+ * For 3630: override clkops_omap2_dflt_wait for the
+ * clocks affected from PWRDN reset Limitation
+ */
+ dpll3_m3x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ dpll4_m2x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ dpll4_m3x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ dpll4_m4x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ dpll4_m5x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ dpll4_m6x2_ck.ops =
+ &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+ } else {
+ /*
+ * XXX This type of dynamic rewriting of the clock tree is
+ * deprecated and should be revised soon.
+ */
+ dpll4_m2_ck = dpll4_m2_ck_34xx;
+ dpll4_m3_ck = dpll4_m3_ck_34xx;
+ dpll4_m4_ck = dpll4_m4_ck_34xx;
+ dpll4_m5_ck = dpll4_m5_ck_34xx;
+ dpll4_m6_ck = dpll4_m6_ck_34xx;
+ }
+
+ if (cpu_is_omap3630())
+ dpll4_dd = dpll4_dd_3630;
+ else
+ dpll4_dd = dpll4_dd_34xx;
clk_init(&omap2_clk_functions);
- for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+ c++)
clk_preinit(c->lk.clk);
- for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+ c++)
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
omap2_init_clk_clkdm(c->lk.clk);
}
- /* REVISIT: Not yet ready for OMAP3 */
-#if 0
- /* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
-#endif
-
recalculate_root_clocks();
printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
deleted file mode 100644
index e370868..0000000
--- a/arch/arm/mach-omap2/clock44xx.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP4-specific clock framework functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Rajendra Nayak (rnayak@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include "clock.h"
-
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
-};
-
-const struct clkops clkops_noncore_dpll_ops = {
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
-};
-
-void omap2_clk_prepare_for_reboot(void)
-{
- return;
-}
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
index 59b9ced..6be1095 100644
--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -2,14 +2,19 @@
* OMAP4 clock function prototypes and macros
*
* Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*/
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define OMAP4430_MAX_DPLL_MULT 2048
+/*
+ * XXX Missing values for the OMAP4 DPLL_USB
+ * XXX Missing min_multiplier values for all OMAP4 DPLLs
+ */
+#define OMAP4430_MAX_DPLL_MULT 2047
#define OMAP4430_MAX_DPLL_DIV 128
-extern const struct clkops clkops_noncore_dpll_ops;
+int omap4xxx_clk_init(void);
#endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 9d882bc..28b1079 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1,8 +1,8 @@
/*
* OMAP4 Clock data
*
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
@@ -20,7 +20,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/list.h>
#include <linux/clk.h>
#include <plat/control.h>
@@ -39,42 +39,36 @@
.name = "extalt_clkin_ck",
.rate = 59000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk pad_clks_ck = {
.name = "pad_clks_ck",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk pad_slimbus_core_clks_ck = {
.name = "pad_slimbus_core_clks_ck",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk secure_32k_clk_src_ck = {
.name = "secure_32k_clk_src_ck",
.rate = 32768,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk slimbus_clk = {
.name = "slimbus_clk",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
.rate = 32768,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk virt_12000000_ck = {
@@ -179,35 +173,30 @@
.clksel_mask = OMAP4430_SYS_CLKSEL_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk utmi_phy_clkout_ck = {
.name = "utmi_phy_clkout_ck",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk xclk60mhsp1_ck = {
.name = "xclk60mhsp1_ck",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk xclk60mhsp2_ck = {
.name = "xclk60mhsp2_ck",
.rate = 12000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
static struct clk xclk60motg_ck = {
.name = "xclk60motg_ck",
.rate = 60000000,
.ops = &clkops_null,
- .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
};
/* Module clocks and DPLL outputs */
@@ -233,7 +222,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel abe_dpll_refclk_mux_sel[] = {
@@ -251,7 +239,6 @@
.clksel_mask = OMAP4430_CLKSEL_0_0_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_ABE */
@@ -279,11 +266,10 @@
.parent = &abe_dpll_refclk_mux_ck,
.dpll_data = &dpll_abe_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_abe_m2x2_ck = {
@@ -291,7 +277,6 @@
.parent = &dpll_abe_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk abe_24m_fclk = {
@@ -299,7 +284,6 @@
.parent = &dpll_abe_m2x2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div3_1to4_rates[] = {
@@ -324,7 +308,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel aess_fclk_div[] = {
@@ -342,7 +325,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div31_1to31_rates[] = {
@@ -395,7 +377,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel core_hsd_byp_clk_mux_sel[] = {
@@ -413,7 +394,6 @@
.clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_CORE */
@@ -443,7 +423,6 @@
.init = &omap2_init_dpll_parent,
.ops = &clkops_null,
.recalc = &omap3_dpll_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_core_m6_div[] = {
@@ -461,7 +440,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dbgclk_mux_sel[] = {
@@ -475,7 +453,6 @@
.parent = &sys_clkin_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_core_m2_ck = {
@@ -488,7 +465,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk ddrphy_ck = {
@@ -496,7 +472,6 @@
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_core_m5_ck = {
@@ -509,7 +484,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel div_core_div[] = {
@@ -527,7 +501,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div4_1to8_rates[] = {
@@ -553,7 +526,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk div_mpu_hs_clk = {
@@ -566,7 +538,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_core_m4_ck = {
@@ -579,7 +550,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dll_clk_div_ck = {
@@ -587,7 +557,6 @@
.parent = &dpll_core_m4_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_abe_m2_ck = {
@@ -600,7 +569,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_core_m3_ck = {
@@ -613,7 +581,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_core_m7_ck = {
@@ -626,7 +593,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
@@ -640,7 +606,6 @@
.parent = &dpll_sys_ref_clk,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_IVA */
@@ -668,11 +633,10 @@
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_iva_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_iva_m4_div[] = {
@@ -690,7 +654,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_iva_m5_ck = {
@@ -703,7 +666,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_MPU */
@@ -731,11 +693,10 @@
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_mpu_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_mpu_m2_div[] = {
@@ -753,7 +714,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk per_hs_clk_div_ck = {
@@ -761,7 +721,6 @@
.parent = &dpll_abe_m3_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel per_hsd_byp_clk_mux_sel[] = {
@@ -779,7 +738,6 @@
.clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_PER */
@@ -807,11 +765,10 @@
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_per_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_per_m2_div[] = {
@@ -829,7 +786,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m2x2_ck = {
@@ -837,7 +793,6 @@
.parent = &dpll_per_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m3_ck = {
@@ -850,7 +805,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m4_ck = {
@@ -863,7 +817,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m5_ck = {
@@ -876,7 +829,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m6_ck = {
@@ -889,7 +841,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_per_m7_ck = {
@@ -902,7 +853,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_UNIPRO */
@@ -930,11 +880,10 @@
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_unipro_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_unipro_m2x2_div[] = {
@@ -952,7 +901,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk usb_hs_clk_div_ck = {
@@ -960,7 +908,6 @@
.parent = &dpll_abe_m3_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/* DPLL_USB */
@@ -980,6 +927,7 @@
.max_multiplier = OMAP4430_MAX_DPLL_MULT,
.max_divider = OMAP4430_MAX_DPLL_DIV,
.min_divider = 1,
+ .flags = DPLL_J_TYPE | DPLL_NO_DCO_SEL
};
@@ -988,11 +936,10 @@
.parent = &dpll_sys_ref_clk,
.dpll_data = &dpll_usb_dd,
.init = &omap2_init_dpll_parent,
- .ops = &clkops_noncore_dpll_ops,
+ .ops = &clkops_omap3_noncore_dpll_ops,
.recalc = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk dpll_usb_clkdcoldo_ck = {
@@ -1000,7 +947,6 @@
.parent = &dpll_usb_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel dpll_usb_m2_div[] = {
@@ -1018,7 +964,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel ducati_clk_mux_sel[] = {
@@ -1036,7 +981,6 @@
.clksel_mask = OMAP4430_CLKSEL_0_0_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk func_12m_fclk = {
@@ -1044,7 +988,6 @@
.parent = &dpll_per_m2x2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk func_24m_clk = {
@@ -1052,7 +995,6 @@
.parent = &dpll_per_m2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk func_24mc_fclk = {
@@ -1060,7 +1002,6 @@
.parent = &dpll_per_m2x2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div2_4to8_rates[] = {
@@ -1084,7 +1025,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk func_48mc_fclk = {
@@ -1092,7 +1032,6 @@
.parent = &dpll_per_m2x2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div2_2to4_rates[] = {
@@ -1116,7 +1055,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_96m_fclk_div[] = {
@@ -1134,7 +1072,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel hsmmc6_fclk_sel[] = {
@@ -1148,7 +1085,6 @@
.parent = &func_64m_fclk,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div2_1to8_rates[] = {
@@ -1172,7 +1108,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel l3_div_div[] = {
@@ -1190,7 +1125,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel l4_div_div[] = {
@@ -1208,7 +1142,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk lp_clk_div_ck = {
@@ -1216,7 +1149,6 @@
.parent = &dpll_abe_m2x2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel l4_wkup_clk_mux_sel[] = {
@@ -1234,7 +1166,6 @@
.clksel_mask = OMAP4430_CLKSEL_0_0_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel per_abe_nc_fclk_div[] = {
@@ -1252,7 +1183,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel mcasp2_fclk_sel[] = {
@@ -1266,7 +1196,6 @@
.parent = &func_96m_fclk,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk mcasp3_fclk = {
@@ -1274,7 +1203,6 @@
.parent = &func_96m_fclk,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk ocp_abe_iclk = {
@@ -1282,7 +1210,6 @@
.parent = &aess_fclk,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk per_abe_24m_fclk = {
@@ -1290,7 +1217,6 @@
.parent = &dpll_abe_m2_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel pmd_stm_clock_mux_sel[] = {
@@ -1305,7 +1231,6 @@
.parent = &sys_clkin_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk pmd_trace_clk_mux_ck = {
@@ -1313,7 +1238,6 @@
.parent = &sys_clkin_ck,
.ops = &clkops_null,
.recalc = &followparent_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static struct clk syc_clk_div_ck = {
@@ -1326,13 +1250,12 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
/* Leaf clocks controlled by modules */
-static struct clk aes1_ck = {
- .name = "aes1_ck",
+static struct clk aes1_fck = {
+ .name = "aes1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_AES1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1341,8 +1264,8 @@
.recalc = &followparent_recalc,
};
-static struct clk aes2_ck = {
- .name = "aes2_ck",
+static struct clk aes2_fck = {
+ .name = "aes2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_AES2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1351,8 +1274,8 @@
.recalc = &followparent_recalc,
};
-static struct clk aess_ck = {
- .name = "aess_ck",
+static struct clk aess_fck = {
+ .name = "aess_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1361,8 +1284,8 @@
.recalc = &followparent_recalc,
};
-static struct clk cust_efuse_ck = {
- .name = "cust_efuse_ck",
+static struct clk cust_efuse_fck = {
+ .name = "cust_efuse_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1371,8 +1294,8 @@
.recalc = &followparent_recalc,
};
-static struct clk des3des_ck = {
- .name = "des3des_ck",
+static struct clk des3des_fck = {
+ .name = "des3des_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1397,7 +1320,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_dmic_abe_gfclk_sel[] = {
@@ -1407,9 +1329,9 @@
{ .parent = NULL },
};
-/* Merged func_dmic_abe_gfclk into dmic_ck */
-static struct clk dmic_ck = {
- .name = "dmic_ck",
+/* Merged func_dmic_abe_gfclk into dmic */
+static struct clk dmic_fck = {
+ .name = "dmic_fck",
.parent = &dmic_sync_mux_ck,
.clksel = func_dmic_abe_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -1417,14 +1339,13 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
};
-static struct clk dss_ck = {
- .name = "dss_ck",
+static struct clk dss_fck = {
+ .name = "dss_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1433,8 +1354,8 @@
.recalc = &followparent_recalc,
};
-static struct clk ducati_ck = {
- .name = "ducati_ck",
+static struct clk ducati_ick = {
+ .name = "ducati_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1443,8 +1364,8 @@
.recalc = &followparent_recalc,
};
-static struct clk emif1_ck = {
- .name = "emif1_ck",
+static struct clk emif1_ick = {
+ .name = "emif1_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1453,8 +1374,8 @@
.recalc = &followparent_recalc,
};
-static struct clk emif2_ck = {
- .name = "emif2_ck",
+static struct clk emif2_ick = {
+ .name = "emif2_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1468,9 +1389,9 @@
{ .parent = NULL },
};
-/* Merged fdif_fclk into fdif_ck */
-static struct clk fdif_ck = {
- .name = "fdif_ck",
+/* Merged fdif_fclk into fdif */
+static struct clk fdif_fck = {
+ .name = "fdif_fck",
.parent = &dpll_per_m4_ck,
.clksel = fdif_fclk_div,
.clksel_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL,
@@ -1479,7 +1400,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "iss_clkdm",
@@ -1500,7 +1420,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel sgx_clk_mux_sel[] = {
@@ -1509,9 +1428,9 @@
{ .parent = NULL },
};
-/* Merged sgx_clk_mux into gfx_ck */
-static struct clk gfx_ck = {
- .name = "gfx_ck",
+/* Merged sgx_clk_mux into gfx */
+static struct clk gfx_fck = {
+ .name = "gfx_fck",
.parent = &dpll_core_m7_ck,
.clksel = sgx_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1519,14 +1438,13 @@
.clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l3_gfx_clkdm",
};
-static struct clk gpio1_ck = {
- .name = "gpio1_ck",
+static struct clk gpio1_ick = {
+ .name = "gpio1_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1535,8 +1453,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpio2_ck = {
- .name = "gpio2_ck",
+static struct clk gpio2_ick = {
+ .name = "gpio2_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1545,8 +1463,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpio3_ck = {
- .name = "gpio3_ck",
+static struct clk gpio3_ick = {
+ .name = "gpio3_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1555,8 +1473,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpio4_ck = {
- .name = "gpio4_ck",
+static struct clk gpio4_ick = {
+ .name = "gpio4_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1565,8 +1483,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpio5_ck = {
- .name = "gpio5_ck",
+static struct clk gpio5_ick = {
+ .name = "gpio5_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1575,8 +1493,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpio6_ck = {
- .name = "gpio6_ck",
+static struct clk gpio6_ick = {
+ .name = "gpio6_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1585,8 +1503,8 @@
.recalc = &followparent_recalc,
};
-static struct clk gpmc_ck = {
- .name = "gpmc_ck",
+static struct clk gpmc_ick = {
+ .name = "gpmc_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1601,9 +1519,12 @@
{ .parent = NULL },
};
-/* Merged dmt1_clk_mux into gptimer1_ck */
-static struct clk gptimer1_ck = {
- .name = "gptimer1_ck",
+/*
+ * Merged dmt1_clk_mux into gptimer1
+ * gptimer1 renamed temporarily into gpt1 to match OMAP3 convention
+ */
+static struct clk gpt1_fck = {
+ .name = "gpt1_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1611,15 +1532,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_wkup_clkdm",
};
-/* Merged cm2_dm10_mux into gptimer10_ck */
-static struct clk gptimer10_ck = {
- .name = "gptimer10_ck",
+/*
+ * Merged cm2_dm10_mux into gptimer10
+ * gptimer10 renamed temporarily into gpt10 to match OMAP3 convention
+ */
+static struct clk gpt10_fck = {
+ .name = "gpt10_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1627,15 +1550,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-/* Merged cm2_dm11_mux into gptimer11_ck */
-static struct clk gptimer11_ck = {
- .name = "gptimer11_ck",
+/*
+ * Merged cm2_dm11_mux into gptimer11
+ * gptimer11 renamed temporarily into gpt11 to match OMAP3 convention
+ */
+static struct clk gpt11_fck = {
+ .name = "gpt11_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1643,15 +1568,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-/* Merged cm2_dm2_mux into gptimer2_ck */
-static struct clk gptimer2_ck = {
- .name = "gptimer2_ck",
+/*
+ * Merged cm2_dm2_mux into gptimer2
+ * gptimer2 renamed temporarily into gpt2 to match OMAP3 convention
+ */
+static struct clk gpt2_fck = {
+ .name = "gpt2_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1659,15 +1586,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-/* Merged cm2_dm3_mux into gptimer3_ck */
-static struct clk gptimer3_ck = {
- .name = "gptimer3_ck",
+/*
+ * Merged cm2_dm3_mux into gptimer3
+ * gptimer3 renamed temporarily into gpt3 to match OMAP3 convention
+ */
+static struct clk gpt3_fck = {
+ .name = "gpt3_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1675,15 +1604,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-/* Merged cm2_dm4_mux into gptimer4_ck */
-static struct clk gptimer4_ck = {
- .name = "gptimer4_ck",
+/*
+ * Merged cm2_dm4_mux into gptimer4
+ * gptimer4 renamed temporarily into gpt4 to match OMAP3 convention
+ */
+static struct clk gpt4_fck = {
+ .name = "gpt4_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1691,7 +1622,6 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
@@ -1703,9 +1633,12 @@
{ .parent = NULL },
};
-/* Merged timer5_sync_mux into gptimer5_ck */
-static struct clk gptimer5_ck = {
- .name = "gptimer5_ck",
+/*
+ * Merged timer5_sync_mux into gptimer5
+ * gptimer5 renamed temporarily into gpt5 to match OMAP3 convention
+ */
+static struct clk gpt5_fck = {
+ .name = "gpt5_fck",
.parent = &syc_clk_div_ck,
.clksel = timer5_sync_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1713,15 +1646,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
};
-/* Merged timer6_sync_mux into gptimer6_ck */
-static struct clk gptimer6_ck = {
- .name = "gptimer6_ck",
+/*
+ * Merged timer6_sync_mux into gptimer6
+ * gptimer6 renamed temporarily into gpt6 to match OMAP3 convention
+ */
+static struct clk gpt6_fck = {
+ .name = "gpt6_fck",
.parent = &syc_clk_div_ck,
.clksel = timer5_sync_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1729,15 +1664,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
};
-/* Merged timer7_sync_mux into gptimer7_ck */
-static struct clk gptimer7_ck = {
- .name = "gptimer7_ck",
+/*
+ * Merged timer7_sync_mux into gptimer7
+ * gptimer7 renamed temporarily into gpt7 to match OMAP3 convention
+ */
+static struct clk gpt7_fck = {
+ .name = "gpt7_fck",
.parent = &syc_clk_div_ck,
.clksel = timer5_sync_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1745,15 +1682,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
};
-/* Merged timer8_sync_mux into gptimer8_ck */
-static struct clk gptimer8_ck = {
- .name = "gptimer8_ck",
+/*
+ * Merged timer8_sync_mux into gptimer8
+ * gptimer8 renamed temporarily into gpt8 to match OMAP3 convention
+ */
+static struct clk gpt8_fck = {
+ .name = "gpt8_fck",
.parent = &syc_clk_div_ck,
.clksel = timer5_sync_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1761,15 +1700,17 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
};
-/* Merged cm2_dm9_mux into gptimer9_ck */
-static struct clk gptimer9_ck = {
- .name = "gptimer9_ck",
+/*
+ * Merged cm2_dm9_mux into gptimer9
+ * gptimer9 renamed temporarily into gpt9 to match OMAP3 convention
+ */
+static struct clk gpt9_fck = {
+ .name = "gpt9_fck",
.parent = &sys_clkin_ck,
.clksel = dmt1_clk_mux_sel,
.init = &omap2_init_clksel_parent,
@@ -1777,14 +1718,13 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-static struct clk hdq1w_ck = {
- .name = "hdq1w_ck",
+static struct clk hdq1w_fck = {
+ .name = "hdq1w_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1793,9 +1733,9 @@
.recalc = &followparent_recalc,
};
-/* Merged hsi_fclk into hsi_ck */
-static struct clk hsi_ck = {
- .name = "hsi_ck",
+/* Merged hsi_fclk into hsi */
+static struct clk hsi_ick = {
+ .name = "hsi_ick",
.parent = &dpll_per_m2x2_ck,
.clksel = per_sgx_fclk_div,
.clksel_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL,
@@ -1804,14 +1744,13 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
.clkdm_name = "l3_init_clkdm",
};
-static struct clk i2c1_ck = {
- .name = "i2c1_ck",
+static struct clk i2c1_fck = {
+ .name = "i2c1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1820,8 +1759,8 @@
.recalc = &followparent_recalc,
};
-static struct clk i2c2_ck = {
- .name = "i2c2_ck",
+static struct clk i2c2_fck = {
+ .name = "i2c2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1830,8 +1769,8 @@
.recalc = &followparent_recalc,
};
-static struct clk i2c3_ck = {
- .name = "i2c3_ck",
+static struct clk i2c3_fck = {
+ .name = "i2c3_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1840,8 +1779,8 @@
.recalc = &followparent_recalc,
};
-static struct clk i2c4_ck = {
- .name = "i2c4_ck",
+static struct clk i2c4_fck = {
+ .name = "i2c4_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1850,8 +1789,8 @@
.recalc = &followparent_recalc,
};
-static struct clk iss_ck = {
- .name = "iss_ck",
+static struct clk iss_fck = {
+ .name = "iss_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_CAM_ISS_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1860,8 +1799,8 @@
.recalc = &followparent_recalc,
};
-static struct clk ivahd_ck = {
- .name = "ivahd_ck",
+static struct clk ivahd_ick = {
+ .name = "ivahd_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1870,8 +1809,8 @@
.recalc = &followparent_recalc,
};
-static struct clk keyboard_ck = {
- .name = "keyboard_ck",
+static struct clk keyboard_fck = {
+ .name = "keyboard_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -1880,8 +1819,8 @@
.recalc = &followparent_recalc,
};
-static struct clk l3_instr_interconnect_ck = {
- .name = "l3_instr_interconnect_ck",
+static struct clk l3_instr_interconnect_ick = {
+ .name = "l3_instr_interconnect_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1890,8 +1829,8 @@
.recalc = &followparent_recalc,
};
-static struct clk l3_interconnect_3_ck = {
- .name = "l3_interconnect_3_ck",
+static struct clk l3_interconnect_3_ick = {
+ .name = "l3_interconnect_3_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -1909,7 +1848,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_mcasp_abe_gfclk_sel[] = {
@@ -1919,9 +1857,9 @@
{ .parent = NULL },
};
-/* Merged func_mcasp_abe_gfclk into mcasp_ck */
-static struct clk mcasp_ck = {
- .name = "mcasp_ck",
+/* Merged func_mcasp_abe_gfclk into mcasp */
+static struct clk mcasp_fck = {
+ .name = "mcasp_fck",
.parent = &mcasp_sync_mux_ck,
.clksel = func_mcasp_abe_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -1929,7 +1867,6 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
@@ -1944,7 +1881,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_mcbsp1_gfclk_sel[] = {
@@ -1954,9 +1890,9 @@
{ .parent = NULL },
};
-/* Merged func_mcbsp1_gfclk into mcbsp1_ck */
-static struct clk mcbsp1_ck = {
- .name = "mcbsp1_ck",
+/* Merged func_mcbsp1_gfclk into mcbsp1 */
+static struct clk mcbsp1_fck = {
+ .name = "mcbsp1_fck",
.parent = &mcbsp1_sync_mux_ck,
.clksel = func_mcbsp1_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -1964,7 +1900,6 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
@@ -1979,7 +1914,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_mcbsp2_gfclk_sel[] = {
@@ -1989,9 +1923,9 @@
{ .parent = NULL },
};
-/* Merged func_mcbsp2_gfclk into mcbsp2_ck */
-static struct clk mcbsp2_ck = {
- .name = "mcbsp2_ck",
+/* Merged func_mcbsp2_gfclk into mcbsp2 */
+static struct clk mcbsp2_fck = {
+ .name = "mcbsp2_fck",
.parent = &mcbsp2_sync_mux_ck,
.clksel = func_mcbsp2_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -1999,7 +1933,6 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
@@ -2014,7 +1947,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel func_mcbsp3_gfclk_sel[] = {
@@ -2024,9 +1956,9 @@
{ .parent = NULL },
};
-/* Merged func_mcbsp3_gfclk into mcbsp3_ck */
-static struct clk mcbsp3_ck = {
- .name = "mcbsp3_ck",
+/* Merged func_mcbsp3_gfclk into mcbsp3 */
+static struct clk mcbsp3_fck = {
+ .name = "mcbsp3_fck",
.parent = &mcbsp3_sync_mux_ck,
.clksel = func_mcbsp3_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -2034,7 +1966,6 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "abe_clkdm",
@@ -2049,7 +1980,6 @@
.clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel per_mcbsp4_gfclk_sel[] = {
@@ -2058,9 +1988,9 @@
{ .parent = NULL },
};
-/* Merged per_mcbsp4_gfclk into mcbsp4_ck */
-static struct clk mcbsp4_ck = {
- .name = "mcbsp4_ck",
+/* Merged per_mcbsp4_gfclk into mcbsp4 */
+static struct clk mcbsp4_fck = {
+ .name = "mcbsp4_fck",
.parent = &mcbsp4_sync_mux_ck,
.clksel = per_mcbsp4_gfclk_sel,
.init = &omap2_init_clksel_parent,
@@ -2068,14 +1998,13 @@
.clksel_mask = OMAP4430_CLKSEL_SOURCE_24_24_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l4_per_clkdm",
};
-static struct clk mcspi1_ck = {
- .name = "mcspi1_ck",
+static struct clk mcspi1_fck = {
+ .name = "mcspi1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2084,8 +2013,8 @@
.recalc = &followparent_recalc,
};
-static struct clk mcspi2_ck = {
- .name = "mcspi2_ck",
+static struct clk mcspi2_fck = {
+ .name = "mcspi2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2094,8 +2023,8 @@
.recalc = &followparent_recalc,
};
-static struct clk mcspi3_ck = {
- .name = "mcspi3_ck",
+static struct clk mcspi3_fck = {
+ .name = "mcspi3_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2104,8 +2033,8 @@
.recalc = &followparent_recalc,
};
-static struct clk mcspi4_ck = {
- .name = "mcspi4_ck",
+static struct clk mcspi4_fck = {
+ .name = "mcspi4_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2114,9 +2043,9 @@
.recalc = &followparent_recalc,
};
-/* Merged hsmmc1_fclk into mmc1_ck */
-static struct clk mmc1_ck = {
- .name = "mmc1_ck",
+/* Merged hsmmc1_fclk into mmc1 */
+static struct clk mmc1_fck = {
+ .name = "mmc1_fck",
.parent = &func_64m_fclk,
.clksel = hsmmc6_fclk_sel,
.init = &omap2_init_clksel_parent,
@@ -2124,15 +2053,14 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l3_init_clkdm",
};
-/* Merged hsmmc2_fclk into mmc2_ck */
-static struct clk mmc2_ck = {
- .name = "mmc2_ck",
+/* Merged hsmmc2_fclk into mmc2 */
+static struct clk mmc2_fck = {
+ .name = "mmc2_fck",
.parent = &func_64m_fclk,
.clksel = hsmmc6_fclk_sel,
.init = &omap2_init_clksel_parent,
@@ -2140,14 +2068,13 @@
.clksel_mask = OMAP4430_CLKSEL_MASK,
.ops = &clkops_omap2_dflt,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
.enable_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
.clkdm_name = "l3_init_clkdm",
};
-static struct clk mmc3_ck = {
- .name = "mmc3_ck",
+static struct clk mmc3_fck = {
+ .name = "mmc3_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2156,8 +2083,8 @@
.recalc = &followparent_recalc,
};
-static struct clk mmc4_ck = {
- .name = "mmc4_ck",
+static struct clk mmc4_fck = {
+ .name = "mmc4_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2166,8 +2093,8 @@
.recalc = &followparent_recalc,
};
-static struct clk mmc5_ck = {
- .name = "mmc5_ck",
+static struct clk mmc5_fck = {
+ .name = "mmc5_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2176,8 +2103,8 @@
.recalc = &followparent_recalc,
};
-static struct clk ocp_wp1_ck = {
- .name = "ocp_wp1_ck",
+static struct clk ocp_wp1_ick = {
+ .name = "ocp_wp1_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2186,8 +2113,8 @@
.recalc = &followparent_recalc,
};
-static struct clk pdm_ck = {
- .name = "pdm_ck",
+static struct clk pdm_fck = {
+ .name = "pdm_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2196,8 +2123,8 @@
.recalc = &followparent_recalc,
};
-static struct clk pkaeip29_ck = {
- .name = "pkaeip29_ck",
+static struct clk pkaeip29_fck = {
+ .name = "pkaeip29_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2206,8 +2133,8 @@
.recalc = &followparent_recalc,
};
-static struct clk rng_ck = {
- .name = "rng_ck",
+static struct clk rng_ick = {
+ .name = "rng_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_RNG_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2216,8 +2143,8 @@
.recalc = &followparent_recalc,
};
-static struct clk sha2md51_ck = {
- .name = "sha2md51_ck",
+static struct clk sha2md51_fck = {
+ .name = "sha2md51_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2226,8 +2153,8 @@
.recalc = &followparent_recalc,
};
-static struct clk sl2_ck = {
- .name = "sl2_ck",
+static struct clk sl2_ick = {
+ .name = "sl2_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_IVAHD_SL2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2236,8 +2163,8 @@
.recalc = &followparent_recalc,
};
-static struct clk slimbus1_ck = {
- .name = "slimbus1_ck",
+static struct clk slimbus1_fck = {
+ .name = "slimbus1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2246,8 +2173,8 @@
.recalc = &followparent_recalc,
};
-static struct clk slimbus2_ck = {
- .name = "slimbus2_ck",
+static struct clk slimbus2_fck = {
+ .name = "slimbus2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2256,8 +2183,8 @@
.recalc = &followparent_recalc,
};
-static struct clk sr_core_ck = {
- .name = "sr_core_ck",
+static struct clk sr_core_fck = {
+ .name = "sr_core_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2266,8 +2193,8 @@
.recalc = &followparent_recalc,
};
-static struct clk sr_iva_ck = {
- .name = "sr_iva_ck",
+static struct clk sr_iva_fck = {
+ .name = "sr_iva_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2276,8 +2203,8 @@
.recalc = &followparent_recalc,
};
-static struct clk sr_mpu_ck = {
- .name = "sr_mpu_ck",
+static struct clk sr_mpu_fck = {
+ .name = "sr_mpu_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2286,8 +2213,8 @@
.recalc = &followparent_recalc,
};
-static struct clk tesla_ck = {
- .name = "tesla_ck",
+static struct clk tesla_ick = {
+ .name = "tesla_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2296,8 +2223,8 @@
.recalc = &followparent_recalc,
};
-static struct clk uart1_ck = {
- .name = "uart1_ck",
+static struct clk uart1_fck = {
+ .name = "uart1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2306,8 +2233,8 @@
.recalc = &followparent_recalc,
};
-static struct clk uart2_ck = {
- .name = "uart2_ck",
+static struct clk uart2_fck = {
+ .name = "uart2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2316,8 +2243,8 @@
.recalc = &followparent_recalc,
};
-static struct clk uart3_ck = {
- .name = "uart3_ck",
+static struct clk uart3_fck = {
+ .name = "uart3_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2326,8 +2253,8 @@
.recalc = &followparent_recalc,
};
-static struct clk uart4_ck = {
- .name = "uart4_ck",
+static struct clk uart4_fck = {
+ .name = "uart4_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2336,8 +2263,8 @@
.recalc = &followparent_recalc,
};
-static struct clk unipro1_ck = {
- .name = "unipro1_ck",
+static struct clk unipro1_fck = {
+ .name = "unipro1_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2346,8 +2273,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usb_host_ck = {
- .name = "usb_host_ck",
+static struct clk usb_host_fck = {
+ .name = "usb_host_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2356,8 +2283,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usb_host_fs_ck = {
- .name = "usb_host_fs_ck",
+static struct clk usb_host_fs_fck = {
+ .name = "usb_host_fs_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2366,8 +2293,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usb_otg_ck = {
- .name = "usb_otg_ck",
+static struct clk usb_otg_ick = {
+ .name = "usb_otg_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2376,8 +2303,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usb_tll_ck = {
- .name = "usb_tll_ck",
+static struct clk usb_tll_ick = {
+ .name = "usb_tll_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2386,8 +2313,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usbphyocp2scp_ck = {
- .name = "usbphyocp2scp_ck",
+static struct clk usbphyocp2scp_ick = {
+ .name = "usbphyocp2scp_ick",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
@@ -2396,8 +2323,8 @@
.recalc = &followparent_recalc,
};
-static struct clk usim_ck = {
- .name = "usim_ck",
+static struct clk usim_fck = {
+ .name = "usim_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2406,8 +2333,8 @@
.recalc = &followparent_recalc,
};
-static struct clk wdt2_ck = {
- .name = "wdt2_ck",
+static struct clk wdt2_fck = {
+ .name = "wdt2_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2416,8 +2343,8 @@
.recalc = &followparent_recalc,
};
-static struct clk wdt3_ck = {
- .name = "wdt3_ck",
+static struct clk wdt3_fck = {
+ .name = "wdt3_fck",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_SWCTRL,
@@ -2442,7 +2369,6 @@
.clksel_mask = OMAP4430_CLKSEL_60M_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel stm_clk_div_div[] = {
@@ -2460,7 +2386,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel trace_clk_div_div[] = {
@@ -2478,7 +2403,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel_rate div2_14to18_rates[] = {
@@ -2502,7 +2426,6 @@
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel utmi_p1_gfclk_sel[] = {
@@ -2520,7 +2443,6 @@
.clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
static const struct clksel utmi_p2_gfclk_sel[] = {
@@ -2538,7 +2460,6 @@
.clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
- .flags = CLOCK_IN_OMAP4430,
};
/*
@@ -2631,106 +2552,139 @@
CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X),
CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X),
CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X),
- CLK(NULL, "aes1_ck", &aes1_ck, CK_443X),
- CLK(NULL, "aes2_ck", &aes2_ck, CK_443X),
- CLK(NULL, "aess_ck", &aess_ck, CK_443X),
- CLK(NULL, "cust_efuse_ck", &cust_efuse_ck, CK_443X),
- CLK(NULL, "des3des_ck", &des3des_ck, CK_443X),
+ CLK(NULL, "aes1_fck", &aes1_fck, CK_443X),
+ CLK(NULL, "aes2_fck", &aes2_fck, CK_443X),
+ CLK(NULL, "aess_fck", &aess_fck, CK_443X),
+ CLK(NULL, "cust_efuse_fck", &cust_efuse_fck, CK_443X),
+ CLK(NULL, "des3des_fck", &des3des_fck, CK_443X),
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
- CLK(NULL, "dmic_ck", &dmic_ck, CK_443X),
- CLK(NULL, "dss_ck", &dss_ck, CK_443X),
- CLK(NULL, "ducati_ck", &ducati_ck, CK_443X),
- CLK(NULL, "emif1_ck", &emif1_ck, CK_443X),
- CLK(NULL, "emif2_ck", &emif2_ck, CK_443X),
- CLK(NULL, "fdif_ck", &fdif_ck, CK_443X),
+ CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
+ CLK(NULL, "dss_fck", &dss_fck, CK_443X),
+ CLK(NULL, "ducati_ick", &ducati_ick, CK_443X),
+ CLK(NULL, "emif1_ick", &emif1_ick, CK_443X),
+ CLK(NULL, "emif2_ick", &emif2_ick, CK_443X),
+ CLK(NULL, "fdif_fck", &fdif_fck, CK_443X),
CLK(NULL, "per_sgx_fclk", &per_sgx_fclk, CK_443X),
- CLK(NULL, "gfx_ck", &gfx_ck, CK_443X),
- CLK(NULL, "gpio1_ck", &gpio1_ck, CK_443X),
- CLK(NULL, "gpio2_ck", &gpio2_ck, CK_443X),
- CLK(NULL, "gpio3_ck", &gpio3_ck, CK_443X),
- CLK(NULL, "gpio4_ck", &gpio4_ck, CK_443X),
- CLK(NULL, "gpio5_ck", &gpio5_ck, CK_443X),
- CLK(NULL, "gpio6_ck", &gpio6_ck, CK_443X),
- CLK(NULL, "gpmc_ck", &gpmc_ck, CK_443X),
- CLK(NULL, "gptimer1_ck", &gptimer1_ck, CK_443X),
- CLK(NULL, "gptimer10_ck", &gptimer10_ck, CK_443X),
- CLK(NULL, "gptimer11_ck", &gptimer11_ck, CK_443X),
- CLK(NULL, "gptimer2_ck", &gptimer2_ck, CK_443X),
- CLK(NULL, "gptimer3_ck", &gptimer3_ck, CK_443X),
- CLK(NULL, "gptimer4_ck", &gptimer4_ck, CK_443X),
- CLK(NULL, "gptimer5_ck", &gptimer5_ck, CK_443X),
- CLK(NULL, "gptimer6_ck", &gptimer6_ck, CK_443X),
- CLK(NULL, "gptimer7_ck", &gptimer7_ck, CK_443X),
- CLK(NULL, "gptimer8_ck", &gptimer8_ck, CK_443X),
- CLK(NULL, "gptimer9_ck", &gptimer9_ck, CK_443X),
- CLK("omap2_hdq.0", "ick", &hdq1w_ck, CK_443X),
- CLK(NULL, "hsi_ck", &hsi_ck, CK_443X),
- CLK("i2c_omap.1", "ick", &i2c1_ck, CK_443X),
- CLK("i2c_omap.2", "ick", &i2c2_ck, CK_443X),
- CLK("i2c_omap.3", "ick", &i2c3_ck, CK_443X),
- CLK("i2c_omap.4", "ick", &i2c4_ck, CK_443X),
- CLK(NULL, "iss_ck", &iss_ck, CK_443X),
- CLK(NULL, "ivahd_ck", &ivahd_ck, CK_443X),
- CLK(NULL, "keyboard_ck", &keyboard_ck, CK_443X),
- CLK(NULL, "l3_instr_interconnect_ck", &l3_instr_interconnect_ck, CK_443X),
- CLK(NULL, "l3_interconnect_3_ck", &l3_interconnect_3_ck, CK_443X),
+ CLK(NULL, "gfx_fck", &gfx_fck, CK_443X),
+ CLK(NULL, "gpio1_ick", &gpio1_ick, CK_443X),
+ CLK(NULL, "gpio2_ick", &gpio2_ick, CK_443X),
+ CLK(NULL, "gpio3_ick", &gpio3_ick, CK_443X),
+ CLK(NULL, "gpio4_ick", &gpio4_ick, CK_443X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_443X),
+ CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X),
+ CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_443X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_443X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_443X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_443X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_443X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_443X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_443X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_443X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_443X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_443X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_443X),
+ CLK("omap2_hdq.0", "fck", &hdq1w_fck, CK_443X),
+ CLK(NULL, "hsi_ick", &hsi_ick, CK_443X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_443X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_443X),
+ CLK("i2c_omap.3", "fck", &i2c3_fck, CK_443X),
+ CLK("i2c_omap.4", "fck", &i2c4_fck, CK_443X),
+ CLK(NULL, "iss_fck", &iss_fck, CK_443X),
+ CLK(NULL, "ivahd_ick", &ivahd_ick, CK_443X),
+ CLK(NULL, "keyboard_fck", &keyboard_fck, CK_443X),
+ CLK(NULL, "l3_instr_interconnect_ick", &l3_instr_interconnect_ick, CK_443X),
+ CLK(NULL, "l3_interconnect_3_ick", &l3_interconnect_3_ick, CK_443X),
CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X),
- CLK(NULL, "mcasp_ck", &mcasp_ck, CK_443X),
+ CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X),
CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.1", "fck", &mcbsp1_ck, CK_443X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_443X),
CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.2", "fck", &mcbsp2_ck, CK_443X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_443X),
CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.3", "fck", &mcbsp3_ck, CK_443X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_443X),
CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X),
- CLK("omap-mcbsp.4", "fck", &mcbsp4_ck, CK_443X),
- CLK("omap2_mcspi.1", "fck", &mcspi1_ck, CK_443X),
- CLK("omap2_mcspi.2", "fck", &mcspi2_ck, CK_443X),
- CLK("omap2_mcspi.3", "fck", &mcspi3_ck, CK_443X),
- CLK("omap2_mcspi.4", "fck", &mcspi4_ck, CK_443X),
- CLK("mmci-omap-hs.0", "fck", &mmc1_ck, CK_443X),
- CLK("mmci-omap-hs.1", "fck", &mmc2_ck, CK_443X),
- CLK("mmci-omap-hs.2", "fck", &mmc3_ck, CK_443X),
- CLK("mmci-omap-hs.3", "fck", &mmc4_ck, CK_443X),
- CLK("mmci-omap-hs.4", "fck", &mmc5_ck, CK_443X),
- CLK(NULL, "ocp_wp1_ck", &ocp_wp1_ck, CK_443X),
- CLK(NULL, "pdm_ck", &pdm_ck, CK_443X),
- CLK(NULL, "pkaeip29_ck", &pkaeip29_ck, CK_443X),
- CLK("omap_rng", "ick", &rng_ck, CK_443X),
- CLK(NULL, "sha2md51_ck", &sha2md51_ck, CK_443X),
- CLK(NULL, "sl2_ck", &sl2_ck, CK_443X),
- CLK(NULL, "slimbus1_ck", &slimbus1_ck, CK_443X),
- CLK(NULL, "slimbus2_ck", &slimbus2_ck, CK_443X),
- CLK(NULL, "sr_core_ck", &sr_core_ck, CK_443X),
- CLK(NULL, "sr_iva_ck", &sr_iva_ck, CK_443X),
- CLK(NULL, "sr_mpu_ck", &sr_mpu_ck, CK_443X),
- CLK(NULL, "tesla_ck", &tesla_ck, CK_443X),
- CLK(NULL, "uart1_ck", &uart1_ck, CK_443X),
- CLK(NULL, "uart2_ck", &uart2_ck, CK_443X),
- CLK(NULL, "uart3_ck", &uart3_ck, CK_443X),
- CLK(NULL, "uart4_ck", &uart4_ck, CK_443X),
- CLK(NULL, "unipro1_ck", &unipro1_ck, CK_443X),
- CLK(NULL, "usb_host_ck", &usb_host_ck, CK_443X),
- CLK(NULL, "usb_host_fs_ck", &usb_host_fs_ck, CK_443X),
- CLK("musb_hdrc", "ick", &usb_otg_ck, CK_443X),
- CLK(NULL, "usb_tll_ck", &usb_tll_ck, CK_443X),
- CLK(NULL, "usbphyocp2scp_ck", &usbphyocp2scp_ck, CK_443X),
- CLK(NULL, "usim_ck", &usim_ck, CK_443X),
- CLK("omap_wdt", "fck", &wdt2_ck, CK_443X),
- CLK(NULL, "wdt3_ck", &wdt3_ck, CK_443X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_443X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_443X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_443X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_443X),
+ CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_443X),
+ CLK("mmci-omap-hs.0", "fck", &mmc1_fck, CK_443X),
+ CLK("mmci-omap-hs.1", "fck", &mmc2_fck, CK_443X),
+ CLK("mmci-omap-hs.2", "fck", &mmc3_fck, CK_443X),
+ CLK("mmci-omap-hs.3", "fck", &mmc4_fck, CK_443X),
+ CLK("mmci-omap-hs.4", "fck", &mmc5_fck, CK_443X),
+ CLK(NULL, "ocp_wp1_ick", &ocp_wp1_ick, CK_443X),
+ CLK(NULL, "pdm_fck", &pdm_fck, CK_443X),
+ CLK(NULL, "pkaeip29_fck", &pkaeip29_fck, CK_443X),
+ CLK("omap_rng", "ick", &rng_ick, CK_443X),
+ CLK(NULL, "sha2md51_fck", &sha2md51_fck, CK_443X),
+ CLK(NULL, "sl2_ick", &sl2_ick, CK_443X),
+ CLK(NULL, "slimbus1_fck", &slimbus1_fck, CK_443X),
+ CLK(NULL, "slimbus2_fck", &slimbus2_fck, CK_443X),
+ CLK(NULL, "sr_core_fck", &sr_core_fck, CK_443X),
+ CLK(NULL, "sr_iva_fck", &sr_iva_fck, CK_443X),
+ CLK(NULL, "sr_mpu_fck", &sr_mpu_fck, CK_443X),
+ CLK(NULL, "tesla_ick", &tesla_ick, CK_443X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_443X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_443X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
+ CLK(NULL, "uart4_fck", &uart4_fck, CK_443X),
+ CLK(NULL, "unipro1_fck", &unipro1_fck, CK_443X),
+ CLK(NULL, "usb_host_fck", &usb_host_fck, CK_443X),
+ CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X),
+ CLK("musb_hdrc", "ick", &usb_otg_ick, CK_443X),
+ CLK(NULL, "usb_tll_ick", &usb_tll_ick, CK_443X),
+ CLK(NULL, "usbphyocp2scp_ick", &usbphyocp2scp_ick, CK_443X),
+ CLK(NULL, "usim_fck", &usim_fck, CK_443X),
+ CLK("omap_wdt", "fck", &wdt2_fck, CK_443X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_443X),
CLK(NULL, "otg_60m_gfclk_ck", &otg_60m_gfclk_ck, CK_443X),
CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X),
CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "utmi_p1_gfclk_ck", &utmi_p1_gfclk_ck, CK_443X),
CLK(NULL, "utmi_p2_gfclk_ck", &utmi_p2_gfclk_ck, CK_443X),
+ CLK(NULL, "gpio1_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpio2_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpio3_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpio4_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpio5_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpio6_dbck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt1_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt2_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt3_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt4_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt5_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt6_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt7_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt8_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt9_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt10_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "gpt11_ick", &dummy_ck, CK_443X),
+ CLK("i2c_omap.1", "ick", &dummy_ck, CK_443X),
+ CLK("i2c_omap.2", "ick", &dummy_ck, CK_443X),
+ CLK("i2c_omap.3", "ick", &dummy_ck, CK_443X),
+ CLK("i2c_omap.4", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X),
+ CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X),
+ CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
+ CLK(NULL, "uart4_ick", &dummy_ck, CK_443X),
+ CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
};
-int __init omap2_clk_init(void)
+int __init omap4xxx_clk_init(void)
{
- /* struct prcm_config *prcm; */
struct omap_clk *c;
- /* u32 clkrate; */
u32 cpu_clkflg;
if (cpu_is_omap44xx()) {
@@ -2749,9 +2703,7 @@
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
- /* TODO
omap2_init_clk_clkdm(c->lk.clk);
- */
}
recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index dd285f0..b87ad66 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1,10 +1,11 @@
/*
- * OMAP2/3 clockdomain framework functions
+ * OMAP2/3/4 clockdomain framework functions
*
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
*
* Written by Paul Walmsley and Jouni Högander
+ * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -26,146 +27,24 @@
#include <linux/bitops.h>
-#include <plat/clock.h>
-
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
+#include <plat/clock.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#include <plat/prcm.h>
/* clkdm_list contains all registered struct clockdomains */
static LIST_HEAD(clkdm_list);
-/* clkdm_mutex protects clkdm_list add and del ops */
-static DEFINE_MUTEX(clkdm_mutex);
-
-/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */
-static struct clkdm_pwrdm_autodep *autodeps;
+/* array of clockdomain deps to be added/removed when clkdm in hwsup mode */
+static struct clkdm_autodep *autodeps;
/* Private functions */
-/*
- * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store
- * @autodep: struct clkdm_pwrdm_autodep * to resolve
- *
- * Resolve autodep powerdomain names to powerdomain pointers via
- * pwrdm_lookup() and store the pointers in the autodep structure. An
- * "autodep" is a powerdomain sleep/wakeup dependency that is
- * automatically added and removed whenever clocks in the associated
- * clockdomain are enabled or disabled (respectively) when the
- * clockdomain is in hardware-supervised mode. Meant to be called
- * once at clockdomain layer initialization, since these should remain
- * fixed for a particular architecture. No return value.
- */
-static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
-{
- struct powerdomain *pwrdm;
-
- if (!autodep)
- return;
-
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
- pwrdm = pwrdm_lookup(autodep->pwrdm.name);
- if (!pwrdm) {
- pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
- autodep->pwrdm.name);
- pwrdm = ERR_PTR(-ENOENT);
- }
- autodep->pwrdm.ptr = pwrdm;
-}
-
-/*
- * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
- * @clkdm: struct clockdomain *
- *
- * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
- * in hardware-supervised mode. Meant to be called from clock framework
- * when a clock inside clockdomain 'clkdm' is enabled. No return value.
- */
-static void _clkdm_add_autodeps(struct clockdomain *clkdm)
-{
- struct clkdm_pwrdm_autodep *autodep;
-
- for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
- if (IS_ERR(autodep->pwrdm.ptr))
- continue;
-
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
- pr_debug("clockdomain: adding %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm.ptr->name,
- clkdm->pwrdm.ptr->name);
-
- pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
- pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
- }
-}
-
-/*
- * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
- * @clkdm: struct clockdomain *
- *
- * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
- * in hardware-supervised mode. Meant to be called from clock framework
- * when a clock inside clockdomain 'clkdm' is disabled. No return value.
- */
-static void _clkdm_del_autodeps(struct clockdomain *clkdm)
-{
- struct clkdm_pwrdm_autodep *autodep;
-
- for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
- if (IS_ERR(autodep->pwrdm.ptr))
- continue;
-
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
- pr_debug("clockdomain: removing %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm.ptr->name,
- clkdm->pwrdm.ptr->name);
-
- pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
- pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
- }
-}
-
-/*
- * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
- * @clkdm: struct clockdomain *
- * @enable: int 0 to disable, 1 to enable
- *
- * Internal helper for actually switching the bit that controls hwsup
- * idle transitions for clkdm.
- */
-static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
-{
- u32 v;
-
- if (cpu_is_omap24xx()) {
- if (enable)
- v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
- else
- v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- } else if (cpu_is_omap34xx()) {
- if (enable)
- v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
- else
- v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
- } else {
- BUG();
- }
-
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
- v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
-}
-
static struct clockdomain *_clkdm_lookup(const char *name)
{
struct clockdomain *clkdm, *temp_clkdm;
@@ -185,47 +64,16 @@
return clkdm;
}
-
-/* Public functions */
-
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- *
- * Set up internal state. If a pointer to an array of clockdomains
- * was supplied, loop through the list of clockdomains, register all
- * that are available on the current platform. Similarly, if a
- * pointer to an array of clockdomain-powerdomain autodependencies was
- * provided, register those. No return value.
- */
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_pwrdm_autodep *init_autodeps)
-{
- struct clockdomain **c = NULL;
- struct clkdm_pwrdm_autodep *autodep = NULL;
-
- if (clkdms)
- for (c = clkdms; *c; c++)
- clkdm_register(*c);
-
- autodeps = init_autodeps;
- if (autodeps)
- for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
- _autodep_lookup(autodep);
-}
-
-/**
- * clkdm_register - register a clockdomain
+ * _clkdm_register - register a clockdomain
* @clkdm: struct clockdomain * to register
*
* Adds a clockdomain to the internal clockdomain list.
* Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
* already registered by the provided name, or 0 upon success.
*/
-int clkdm_register(struct clockdomain *clkdm)
+static int _clkdm_register(struct clockdomain *clkdm)
{
- int ret = -EINVAL;
struct powerdomain *pwrdm;
if (!clkdm || !clkdm->name)
@@ -242,55 +90,310 @@
}
clkdm->pwrdm.ptr = pwrdm;
- mutex_lock(&clkdm_mutex);
/* Verify that the clockdomain is not already registered */
- if (_clkdm_lookup(clkdm->name)) {
- ret = -EEXIST;
- goto cr_unlock;
- }
+ if (_clkdm_lookup(clkdm->name))
+ return -EEXIST;
list_add(&clkdm->node, &clkdm_list);
pwrdm_add_clkdm(pwrdm, clkdm);
pr_debug("clockdomain: registered %s\n", clkdm->name);
- ret = 0;
-cr_unlock:
- mutex_unlock(&clkdm_mutex);
+ return 0;
+}
- return ret;
+/* _clkdm_deps_lookup - look up the specified clockdomain in a clkdm list */
+static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
+ struct clkdm_dep *deps)
+{
+ struct clkdm_dep *cd;
+
+ if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ return ERR_PTR(-EINVAL);
+
+ for (cd = deps; cd->clkdm_name; cd++) {
+ if (!omap_chip_is(cd->omap_chip))
+ continue;
+
+ if (!cd->clkdm && cd->clkdm_name)
+ cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
+ if (cd->clkdm == clkdm)
+ break;
+ }
+
+ if (!cd->clkdm_name)
+ return ERR_PTR(-ENOENT);
+
+ return cd;
+}
+
+/*
+ * _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store
+ * @autodep: struct clkdm_autodep * to resolve
+ *
+ * Resolve autodep clockdomain names to clockdomain pointers via
+ * clkdm_lookup() and store the pointers in the autodep structure. An
+ * "autodep" is a clockdomain sleep/wakeup dependency that is
+ * automatically added and removed whenever clocks in the associated
+ * clockdomain are enabled or disabled (respectively) when the
+ * clockdomain is in hardware-supervised mode. Meant to be called
+ * once at clockdomain layer initialization, since these should remain
+ * fixed for a particular architecture. No return value.
+ */
+static void _autodep_lookup(struct clkdm_autodep *autodep)
+{
+ struct clockdomain *clkdm;
+
+ if (!autodep)
+ return;
+
+ if (!omap_chip_is(autodep->omap_chip))
+ return;
+
+ clkdm = clkdm_lookup(autodep->clkdm.name);
+ if (!clkdm) {
+ pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
+ autodep->clkdm.name);
+ clkdm = ERR_PTR(-ENOENT);
+ }
+ autodep->clkdm.ptr = clkdm;
+}
+
+/*
+ * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
+ * @clkdm: struct clockdomain *
+ *
+ * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
+ * in hardware-supervised mode. Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is enabled. No return value.
+ */
+static void _clkdm_add_autodeps(struct clockdomain *clkdm)
+{
+ struct clkdm_autodep *autodep;
+
+ if (!autodeps)
+ return;
+
+ for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
+ if (IS_ERR(autodep->clkdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
+ continue;
+
+ pr_debug("clockdomain: adding %s sleepdep/wkdep for "
+ "clkdm %s\n", autodep->clkdm.ptr->name,
+ clkdm->name);
+
+ clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
+ clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
+ }
+}
+
+/*
+ * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
+ * @clkdm: struct clockdomain *
+ *
+ * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
+ * in hardware-supervised mode. Meant to be called from clock framework
+ * when a clock inside clockdomain 'clkdm' is disabled. No return value.
+ */
+static void _clkdm_del_autodeps(struct clockdomain *clkdm)
+{
+ struct clkdm_autodep *autodep;
+
+ if (!autodeps)
+ return;
+
+ for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
+ if (IS_ERR(autodep->clkdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
+ continue;
+
+ pr_debug("clockdomain: removing %s sleepdep/wkdep for "
+ "clkdm %s\n", autodep->clkdm.ptr->name,
+ clkdm->name);
+
+ clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
+ clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
+ }
+}
+
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+ u32 bits, v;
+
+ if (cpu_is_omap24xx()) {
+ if (enable)
+ bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+ } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ if (enable)
+ bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ bits = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+ } else {
+ BUG();
+ }
+
+ bits = bits << __ffs(clkdm->clktrctrl_mask);
+
+ v = __raw_readl(clkdm->clkstctrl_reg);
+ v &= ~(clkdm->clktrctrl_mask);
+ v |= bits;
+ __raw_writel(v, clkdm->clkstctrl_reg);
+
}
/**
- * clkdm_unregister - unregister a clockdomain
- * @clkdm: struct clockdomain * to unregister
+ * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
+ * @clkdm: clockdomain to initialize wkdep usecounts
*
- * Removes a clockdomain from the internal clockdomain list. Returns
- * -EINVAL if clkdm argument is NULL.
+ * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
+ * If a wakeup dependency is present in the hardware, the usecount will be
+ * set to 1; otherwise, it will be set to 0. Software should clear all
+ * software wakeup dependencies prior to calling this function if it wishes
+ * to ensure that all usecounts start at 0. No return value.
*/
-int clkdm_unregister(struct clockdomain *clkdm)
+static void _init_wkdep_usecount(struct clockdomain *clkdm)
{
- if (!clkdm)
- return -EINVAL;
+ u32 v;
+ struct clkdm_dep *cd;
- pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
+ if (!clkdm->wkdep_srcs)
+ return;
- mutex_lock(&clkdm_mutex);
- list_del(&clkdm->node);
- mutex_unlock(&clkdm_mutex);
+ for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
+ if (!omap_chip_is(cd->omap_chip))
+ continue;
- pr_debug("clockdomain: unregistered %s\n", clkdm->name);
+ if (!cd->clkdm && cd->clkdm_name)
+ cd->clkdm = _clkdm_lookup(cd->clkdm_name);
- return 0;
+ if (!cd->clkdm) {
+ WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
+ "found\n", clkdm->name, cd->clkdm_name);
+ continue;
+ }
+
+ v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
+ PM_WKDEP,
+ (1 << cd->clkdm->dep_bit));
+
+ if (v)
+ pr_debug("clockdomain: %s: wakeup dependency already "
+ "set to wake up when %s wakes\n",
+ clkdm->name, cd->clkdm->name);
+
+ atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
+ }
+}
+
+/**
+ * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
+ * @clkdm: clockdomain to initialize sleepdep usecounts
+ *
+ * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
+ * If a sleep dependency is present in the hardware, the usecount will be
+ * set to 1; otherwise, it will be set to 0. Software should clear all
+ * software sleep dependencies prior to calling this function if it wishes
+ * to ensure that all usecounts start at 0. No return value.
+ */
+static void _init_sleepdep_usecount(struct clockdomain *clkdm)
+{
+ u32 v;
+ struct clkdm_dep *cd;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ if (!clkdm->sleepdep_srcs)
+ return;
+
+ for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
+ if (!omap_chip_is(cd->omap_chip))
+ continue;
+
+ if (!cd->clkdm && cd->clkdm_name)
+ cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
+ if (!cd->clkdm) {
+ WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
+ "not found\n", clkdm->name, cd->clkdm_name);
+ continue;
+ }
+
+ v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP,
+ (1 << cd->clkdm->dep_bit));
+
+ if (v)
+ pr_debug("clockdomain: %s: sleep dependency already "
+ "set to prevent from idling until %s "
+ "idles\n", clkdm->name, cd->clkdm->name);
+
+ atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
+ }
+};
+
+/* Public functions */
+
+/**
+ * clkdm_init - set up the clockdomain layer
+ * @clkdms: optional pointer to an array of clockdomains to register
+ * @init_autodeps: optional pointer to an array of autodeps to register
+ *
+ * Set up internal state. If a pointer to an array of clockdomains
+ * @clkdms was supplied, loop through the list of clockdomains,
+ * register all that are available on the current platform. Similarly,
+ * if a pointer to an array of clockdomain autodependencies
+ * @init_autodeps was provided, register those. No return value.
+ */
+void clkdm_init(struct clockdomain **clkdms,
+ struct clkdm_autodep *init_autodeps)
+{
+ struct clockdomain **c = NULL;
+ struct clockdomain *clkdm;
+ struct clkdm_autodep *autodep = NULL;
+
+ if (clkdms)
+ for (c = clkdms; *c; c++)
+ _clkdm_register(*c);
+
+ autodeps = init_autodeps;
+ if (autodeps)
+ for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
+ _autodep_lookup(autodep);
+
+ /*
+ * Ensure that the *dep_usecount registers reflect the current
+ * state of the PRCM.
+ */
+ list_for_each_entry(clkdm, &clkdm_list, node) {
+ _init_wkdep_usecount(clkdm);
+ _init_sleepdep_usecount(clkdm);
+ }
}
/**
* clkdm_lookup - look up a clockdomain by name, return a pointer
* @name: name of clockdomain
*
- * Find a registered clockdomain by its name. Returns a pointer to the
- * struct clockdomain if found, or NULL otherwise.
+ * Find a registered clockdomain by its name @name. Returns a pointer
+ * to the struct clockdomain if found, or NULL otherwise.
*/
struct clockdomain *clkdm_lookup(const char *name)
{
@@ -301,14 +404,12 @@
clkdm = NULL;
- mutex_lock(&clkdm_mutex);
list_for_each_entry(temp_clkdm, &clkdm_list, node) {
if (!strcmp(name, temp_clkdm->name)) {
clkdm = temp_clkdm;
break;
}
}
- mutex_unlock(&clkdm_mutex);
return clkdm;
}
@@ -317,8 +418,8 @@
* clkdm_for_each - call function on each registered clockdomain
* @fn: callback function *
*
- * Call the supplied function for each registered clockdomain.
- * The callback function can return anything but 0 to bail
+ * Call the supplied function @fn for each registered clockdomain.
+ * The callback function @fn can return anything but 0 to bail
* out early from the iterator. The callback function is called with
* the clkdm_mutex held, so no clockdomain structure manipulation
* functions should be called from the callback, although hardware
@@ -336,13 +437,11 @@
if (!fn)
return -EINVAL;
- mutex_lock(&clkdm_mutex);
list_for_each_entry(clkdm, &clkdm_list, node) {
ret = (*fn)(clkdm, user);
if (ret)
break;
}
- mutex_unlock(&clkdm_mutex);
return ret;
}
@@ -353,7 +452,7 @@
* @clkdm: struct clockdomain *
*
* Return a pointer to the struct powerdomain that the specified clockdomain
- * 'clkdm' exists in, or returns NULL if clkdm argument is NULL.
+ * @clkdm exists in, or returns NULL if @clkdm is NULL.
*/
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
{
@@ -367,11 +466,309 @@
/* Hardware clockdomain control */
/**
- * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
- * @clk: struct clk * of a clockdomain
+ * clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
*
- * Return the clockdomain's current state transition mode from the
- * corresponding domain CM_CLKSTCTRL register. Returns -EINVAL if clk
+ * When the clockdomain represented by @clkdm2 wakes up, wake up
+ * @clkdm1. Implemented in hardware on the OMAP, this feature is
+ * designed to reduce wakeup latency of the dependent clockdomain @clkdm1.
+ * Returns -EINVAL if presented with invalid clockdomain pointers,
+ * -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon
+ * success.
+ */
+int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
+ pr_debug("clockdomain: hardware will wake up %s when %s wakes "
+ "up\n", clkdm1->name, clkdm2->name);
+
+ prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ }
+
+ return 0;
+}
+
+/**
+ * clkdm_del_wkdep - remove a wakeup dependency from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
+ *
+ * Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2
+ * wakes up. Returns -EINVAL if presented with invalid clockdomain
+ * pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or
+ * 0 upon success.
+ */
+int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
+ pr_debug("clockdomain: hardware will no longer wake up %s "
+ "after %s wakes up\n", clkdm1->name, clkdm2->name);
+
+ prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ }
+
+ return 0;
+}
+
+/**
+ * clkdm_read_wkdep - read wakeup dependency state from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
+ *
+ * Return 1 if a hardware wakeup dependency exists wherein @clkdm1 will be
+ * awoken when @clkdm2 wakes up; 0 if dependency is not set; -EINVAL
+ * if either clockdomain pointer is invalid; or -ENOENT if the hardware
+ * is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * wakeup dependencies. Wakeup dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear wake up of "
+ "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ /* XXX It's faster to return the atomic wkdep_usecount */
+ return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+/**
+ * clkdm_clear_all_wkdeps - remove all wakeup dependencies from target clkdm
+ * @clkdm: struct clockdomain * to remove all wakeup dependencies from
+ *
+ * Remove all inter-clockdomain wakeup dependencies that could cause
+ * @clkdm to wake. Intended to be used during boot to initialize the
+ * PRCM to a known state, after all clockdomains are put into swsup idle
+ * and woken up. Returns -EINVAL if @clkdm pointer is invalid, or
+ * 0 upon success.
+ */
+int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ if (!clkdm)
+ return -EINVAL;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!omap_chip_is(cd->omap_chip))
+ continue;
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP);
+
+ return 0;
+}
+
+/**
+ * clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Prevent @clkdm1 from automatically going inactive (and then to
+ * retention or off) if @clkdm2 is active. Returns -EINVAL if
+ * presented with invalid clockdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep
+ * dependencies, -ENOENT if the specified dependency cannot be set in
+ * hardware, or 0 upon success.
+ */
+int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", clkdm1->name,
+ clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
+ pr_debug("clockdomain: will prevent %s from sleeping if %s "
+ "is active\n", clkdm1->name, clkdm2->name);
+
+ cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ }
+
+ return 0;
+}
+
+/**
+ * clkdm_del_sleepdep - remove a sleep dependency from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Allow @clkdm1 to automatically go inactive (and then to retention or
+ * off), independent of the activity state of @clkdm2. Returns -EINVAL
+ * if presented with invalid clockdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be cleared in hardware, or
+ * 0 upon success.
+ */
+int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", clkdm1->name,
+ clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
+ pr_debug("clockdomain: will no longer prevent %s from "
+ "sleeping if %s is active\n", clkdm1->name,
+ clkdm2->name);
+
+ cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ }
+
+ return 0;
+}
+
+/**
+ * clkdm_read_sleepdep - read sleep dependency state from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Return 1 if a hardware sleep dependency exists wherein @clkdm1 will
+ * not be allowed to automatically go inactive if @clkdm2 is active;
+ * 0 if @clkdm1's automatic power state inactivity transition is independent
+ * of @clkdm2's; -EINVAL if either clockdomain pointer is invalid or called
+ * on a machine that does not support software-configurable hardware sleep
+ * dependencies; or -ENOENT if the hardware is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * sleep dependencies. Sleep dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+ struct clkdm_dep *cd;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ if (!clkdm1 || !clkdm2)
+ return -EINVAL;
+
+ cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+ if (IS_ERR(cd)) {
+ pr_debug("clockdomain: hardware cannot set/clear sleep "
+ "dependency affecting %s from %s\n", clkdm1->name,
+ clkdm2->name);
+ return PTR_ERR(cd);
+ }
+
+ /* XXX It's faster to return the atomic sleepdep_usecount */
+ return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+/**
+ * clkdm_clear_all_sleepdeps - remove all sleep dependencies from target clkdm
+ * @clkdm: struct clockdomain * to remove all sleep dependencies from
+ *
+ * Remove all inter-clockdomain sleep dependencies that could prevent
+ * @clkdm from idling. Intended to be used during boot to initialize the
+ * PRCM to a known state, after all clockdomains are put into swsup idle
+ * and woken up. Returns -EINVAL if @clkdm pointer is invalid, or
+ * 0 upon success.
+ */
+int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ if (!cpu_is_omap34xx())
+ return -EINVAL;
+
+ if (!clkdm)
+ return -EINVAL;
+
+ for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!omap_chip_is(cd->omap_chip))
+ continue;
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->sleepdep_usecount, 0);
+ }
+
+ prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+
+ return 0;
+}
+
+/**
+ * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
+ * @clkdm: struct clkdm * of a clockdomain
+ *
+ * Return the clockdomain @clkdm current state transition mode from the
+ * corresponding domain CM_CLKSTCTRL register. Returns -EINVAL if @clkdm
* is NULL or the current mode upon success.
*/
static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
@@ -381,7 +778,7 @@
if (!clkdm)
return -EINVAL;
- v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+ v = __raw_readl(clkdm->clkstctrl_reg);
v &= clkdm->clktrctrl_mask;
v >>= __ffs(clkdm->clktrctrl_mask);
@@ -393,7 +790,7 @@
* @clkdm: struct clockdomain *
*
* Instruct the CM to force a sleep transition on the specified
- * clockdomain 'clkdm'. Returns -EINVAL if clk is NULL or if
+ * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if
* clockdomain does not support software-initiated sleep; 0 upon
* success.
*/
@@ -413,15 +810,17 @@
if (cpu_is_omap24xx()) {
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx()) {
+ } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
- u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
+ u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
__ffs(clkdm->clktrctrl_mask));
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+ u32 v = __raw_readl(clkdm->clkstctrl_reg);
+ v &= ~(clkdm->clktrctrl_mask);
+ v |= bits;
+ __raw_writel(v, clkdm->clkstctrl_reg);
} else {
BUG();
@@ -435,7 +834,7 @@
* @clkdm: struct clockdomain *
*
* Instruct the CM to force a wakeup transition on the specified
- * clockdomain 'clkdm'. Returns -EINVAL if clkdm is NULL or if the
+ * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the
* clockdomain does not support software-controlled wakeup; 0 upon
* success.
*/
@@ -455,15 +854,17 @@
if (cpu_is_omap24xx()) {
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx()) {
+ } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
- u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
+ u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
__ffs(clkdm->clktrctrl_mask));
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+ u32 v = __raw_readl(clkdm->clkstctrl_reg);
+ v &= ~(clkdm->clktrctrl_mask);
+ v |= bits;
+ __raw_writel(v, clkdm->clkstctrl_reg);
} else {
BUG();
@@ -476,7 +877,7 @@
* omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
* @clkdm: struct clockdomain *
*
- * Allow the hardware to automatically switch the clockdomain into
+ * Allow the hardware to automatically switch the clockdomain @clkdm into
* active or idle states, as needed by downstream clocks. If the
* clockdomain has any downstream clocks enabled in the clock
* framework, wkdep/sleepdep autodependencies are added; this is so
@@ -496,8 +897,17 @@
pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
clkdm->name);
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
+ /*
+ * XXX This should be removed once TI adds wakeup/sleep
+ * dependency code and data for OMAP4.
+ */
+ if (cpu_is_omap44xx()) {
+ WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+ "support is not yet implemented\n");
+ } else {
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+ }
_omap2_clkdm_set_hwsup(clkdm, 1);
@@ -509,8 +919,8 @@
* @clkdm: struct clockdomain *
*
* Prevent the hardware from automatically switching the clockdomain
- * into inactive or idle states. If the clockdomain has downstream
- * clocks enabled in the clock framework, wkdep/sleepdep
+ * @clkdm into inactive or idle states. If the clockdomain has
+ * downstream clocks enabled in the clock framework, wkdep/sleepdep
* autodependencies are removed. No return value.
*/
void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
@@ -529,8 +939,17 @@
_omap2_clkdm_set_hwsup(clkdm, 0);
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
+ /*
+ * XXX This should be removed once TI adds wakeup/sleep
+ * dependency code and data for OMAP4.
+ */
+ if (cpu_is_omap44xx()) {
+ WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+ "support is not yet implemented\n");
+ } else {
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+ }
}
@@ -541,14 +960,14 @@
* @clkdm: struct clockdomain *
* @clk: struct clk * of the enabled downstream clock
*
- * Increment the usecount of this clockdomain 'clkdm' and ensure that
- * it is awake. Intended to be called by clk_enable() code. If the
- * clockdomain is in software-supervised idle mode, force the
- * clockdomain to wake. If the clockdomain is in hardware-supervised
- * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices
- * in the clockdomain can be read from/written to by on-chip processors.
- * Returns -EINVAL if passed null pointers; returns 0 upon success or
- * if the clockdomain is in hwsup idle mode.
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @clk is enabled. Intended to be called by
+ * clk_enable() code. If the clockdomain is in software-supervised
+ * idle mode, force the clockdomain to wake. If the clockdomain is in
+ * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
+ * ensure that devices in the clockdomain can be read from/written to
+ * by on-chip processors. Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
*/
int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
{
@@ -559,7 +978,7 @@
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk || !clkdm->clktrctrl_mask)
+ if (!clkdm || !clk)
return -EINVAL;
if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -570,6 +989,9 @@
pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
clk->name);
+ if (!clkdm->clkstctrl_reg)
+ return 0;
+
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
@@ -593,13 +1015,14 @@
* @clkdm: struct clockdomain *
* @clk: struct clk * of the disabled downstream clock
*
- * Decrement the usecount of this clockdomain 'clkdm'. Intended to be
- * called by clk_disable() code. If the usecount goes to 0, put the
- * clockdomain to sleep (software-supervised mode) or remove the
- * clkdm-pwrdm autodependencies (hardware-supervised mode). Returns
- * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount
- * underflows and debugging is enabled; or returns 0 upon success or
- * if the clockdomain is in hwsup idle mode.
+ * Decrement the usecount of this clockdomain @clkdm when @clk is
+ * disabled. Intended to be called by clk_disable() code. If the
+ * clockdomain usecount goes to 0, put the clockdomain to sleep
+ * (software-supervised mode) or remove the clkdm autodependencies
+ * (hardware-supervised mode). Returns -EINVAL if passed null
+ * pointers; -ERANGE if the @clkdm usecount underflows and debugging
+ * is enabled; or returns 0 upon success or if the clockdomain is in
+ * hwsup idle mode.
*/
int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
{
@@ -610,7 +1033,7 @@
* downstream clocks for debugging purposes?
*/
- if (!clkdm || !clk || !clkdm->clktrctrl_mask)
+ if (!clkdm || !clk)
return -EINVAL;
#ifdef DEBUG
@@ -628,6 +1051,9 @@
pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
clk->name);
+ if (!clkdm->clkstctrl_reg)
+ return 0;
+
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index c4ee076..8fc19ff 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -1,16 +1,420 @@
/*
* OMAP2/3 clockdomains
*
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Written by Paul Walmsley and Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP2/3 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
#include <plat/clockdomain.h>
+#include "cm.h"
+#include "prm.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP2/3-common wakeup dependencies */
+
+/*
+ * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+ CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+ CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/* 24XX-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+/* Wakeup dependency source arrays */
+
+/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
+static struct clkdm_dep dsp_24xx_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ { NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep mpu_24xx_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "dsp_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "mdm_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ },
+ { NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep core_24xx_wkdeps[] = {
+ {
+ .clkdm_name = "dsp_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "gfx_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "mdm_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ },
+ { NULL },
+};
+
+#endif
+
+
+/* 2430-specific possible wakeup dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+ },
+ { NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP2430 */
+
+
+/* OMAP3-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "dss_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "per_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ {
+ .clkdm_name = "core_l3_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "core_l4_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "dss_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "per_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "wkup_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ {
+ .clkdm_name = "iva2_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ {
+ .clkdm_name = "mpu_clkdm",
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ },
+ { NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP3 */
+
/*
* OMAP2/3-common clockdomains
@@ -21,10 +425,13 @@
* sys_clkout/sys_clkout2.
*/
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
/* This is an implicit clockdomain - it is never defined as such in TRM */
static struct clockdomain wkup_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
+ .dep_bit = OMAP_EN_WKUP_SHIFT,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
@@ -40,6 +447,8 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
+#endif
+
/*
* 2420-only clockdomains
*/
@@ -50,6 +459,8 @@
.name = "mpu_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = mpu_24xx_wkdeps,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
@@ -58,11 +469,64 @@
.name = "iva1_clkdm",
.pwrdm = { .name = "dsp_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
-#endif /* CONFIG_ARCH_OMAP2420 */
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = core_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = core_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+#endif /* CONFIG_ARCH_OMAP2420 */
/*
@@ -75,80 +539,105 @@
.name = "mpu_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(MPU_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = mpu_24xx_wkdeps,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
+/* Another case of bit name collisions between several registers: EN_MDM */
static struct clockdomain mdm_clkdm = {
.name = "mdm_clkdm",
.pwrdm = { .name = "mdm_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(OMAP2430_MDM_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(OMAP24XX_DSP_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
#endif /* CONFIG_ARCH_OMAP2430 */
/*
- * 24XX-only clockdomains
+ * OMAP3 clockdomains
*/
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP3)
-static struct clockdomain dsp_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-};
-
-static struct clockdomain gfx_24xx_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-};
-
-static struct clockdomain core_l3_24xx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-};
-
-static struct clockdomain core_l4_24xx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-};
-
-static struct clockdomain dss_24xx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-};
-
-#endif /* CONFIG_ARCH_OMAP24XX */
-
-
-/*
- * 34xx clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-
-static struct clockdomain mpu_34xx_clkdm = {
+static struct clockdomain mpu_3xxx_clkdm = {
.name = "mpu_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -157,6 +646,9 @@
.name = "neon_clkdm",
.pwrdm = { .name = "neon_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_NEON_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = neon_wkdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -165,6 +657,10 @@
.name = "iva2_clkdm",
.pwrdm = { .name = "iva2_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_IVA2_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -173,6 +669,9 @@
.name = "gfx_clkdm",
.pwrdm = { .name = "gfx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
};
@@ -181,6 +680,10 @@
.name = "sgx_clkdm",
.pwrdm = { .name = "sgx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430ES2_SGX_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = gfx_sgx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
@@ -196,30 +699,51 @@
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
-static struct clockdomain core_l3_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
.name = "core_l3_clkdm",
.pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
-static struct clockdomain core_l4_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
.name = "core_l4_clkdm",
.pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
-static struct clockdomain dss_34xx_clkdm = {
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
.name = "dss_clkdm",
.pwrdm = { .name = "dss_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_DSS_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -228,6 +752,10 @@
.name = "cam_clkdm",
.pwrdm = { .name = "cam_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_CAM_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -236,6 +764,10 @@
.name = "usbhost_clkdm",
.pwrdm = { .name = "usbhost_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430ES2_USBHOST_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
@@ -244,6 +776,11 @@
.name = "per_clkdm",
.pwrdm = { .name = "per_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_PER_MOD,
+ OMAP2_CM_CLKSTCTRL),
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -256,6 +793,8 @@
.name = "emu_clkdm",
.pwrdm = { .name = "emu_pwrdm" },
.flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clkstctrl_reg = OMAP34XX_CM_REGADDR(OMAP3430_EMU_MOD,
+ OMAP2_CM_CLKSTCTRL),
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -290,64 +829,70 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#include "clockdomains44xx.h"
/*
- * Clockdomain-powerdomain hwsup dependencies (34XX only)
+ * Clockdomain hwsup dependencies (OMAP3 only)
*/
-static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
+static struct clkdm_autodep clkdm_autodeps[] = {
{
- .pwrdm = { .name = "mpu_pwrdm" },
+ .clkdm = { .name = "mpu_clkdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{
- .pwrdm = { .name = "iva2_pwrdm" },
+ .clkdm = { .name = "iva2_clkdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{
- .pwrdm = { .name = NULL },
+ .clkdm = { .name = NULL },
}
};
/*
- *
+ * List of clockdomain pointers per platform
*/
static struct clockdomain *clockdomains_omap[] = {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
&wkup_clkdm,
&cm_clkdm,
&prm_clkdm,
+#endif
#ifdef CONFIG_ARCH_OMAP2420
&mpu_2420_clkdm,
&iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
#endif
#ifdef CONFIG_ARCH_OMAP2430
&mpu_2430_clkdm,
&mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
#endif
-#ifdef CONFIG_ARCH_OMAP24XX
- &dsp_clkdm,
- &gfx_24xx_clkdm,
- &core_l3_24xx_clkdm,
- &core_l4_24xx_clkdm,
- &dss_24xx_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP34XX
- &mpu_34xx_clkdm,
+#ifdef CONFIG_ARCH_OMAP3
+ &mpu_3xxx_clkdm,
&neon_clkdm,
&iva2_clkdm,
&gfx_3430es1_clkdm,
&sgx_clkdm,
&d2d_clkdm,
- &core_l3_34xx_clkdm,
- &core_l4_34xx_clkdm,
- &dss_34xx_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
&cam_clkdm,
&usbhost_clkdm,
&per_clkdm,
@@ -359,6 +904,33 @@
&dpll5_clkdm,
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ &l4_cefuse_44xx_clkdm,
+ &l4_cfg_44xx_clkdm,
+ &tesla_44xx_clkdm,
+ &l3_gfx_44xx_clkdm,
+ &ivahd_44xx_clkdm,
+ &l4_secure_44xx_clkdm,
+ &l4_per_44xx_clkdm,
+ &abe_44xx_clkdm,
+ &l3_instr_44xx_clkdm,
+ &l3_init_44xx_clkdm,
+ &mpuss_44xx_clkdm,
+ &mpu0_44xx_clkdm,
+ &mpu1_44xx_clkdm,
+ &l3_emif_44xx_clkdm,
+ &l4_ao_44xx_clkdm,
+ &ducati_44xx_clkdm,
+ &l3_2_44xx_clkdm,
+ &l3_1_44xx_clkdm,
+ &l3_d2d_44xx_clkdm,
+ &iss_44xx_clkdm,
+ &l3_dss_44xx_clkdm,
+ &l4_wkup_44xx_clkdm,
+ &emu_sys_44xx_clkdm,
+ &l3_dma_44xx_clkdm,
+#endif
+
NULL,
};
diff --git a/arch/arm/mach-omap2/clockdomains44xx.h b/arch/arm/mach-omap2/clockdomains44xx.h
new file mode 100644
index 0000000..438aaee
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains44xx.h
@@ -0,0 +1,250 @@
+/*
+ * OMAP4 Clock domains framework
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * To-Do List
+ * -> Populate the Sleep/Wakeup dependencies for the domains
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+
+#include <plat/clockdomain.h>
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+static struct clockdomain l4_cefuse_44xx_clkdm = {
+ .name = "l4_cefuse_clkdm",
+ .pwrdm = { .name = "cefuse_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_CEFUSE_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_cfg_44xx_clkdm = {
+ .name = "l4_cfg_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L4CFG_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain tesla_44xx_clkdm = {
+ .name = "tesla_clkdm",
+ .pwrdm = { .name = "tesla_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_TESLA_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_gfx_44xx_clkdm = {
+ .name = "l3_gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_GFX_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ivahd_44xx_clkdm = {
+ .name = "ivahd_clkdm",
+ .pwrdm = { .name = "ivahd_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_IVAHD_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_secure_44xx_clkdm = {
+ .name = "l4_secure_clkdm",
+ .pwrdm = { .name = "l4per_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L4SEC_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_per_44xx_clkdm = {
+ .name = "l4_per_clkdm",
+ .pwrdm = { .name = "l4per_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L4PER_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain abe_44xx_clkdm = {
+ .name = "abe_clkdm",
+ .pwrdm = { .name = "abe_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM1_ABE_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_instr_44xx_clkdm = {
+ .name = "l3_instr_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L3INSTR_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_init_44xx_clkdm = {
+ .name = "l3_init_clkdm",
+ .pwrdm = { .name = "l3init_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L3INIT_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpuss_44xx_clkdm = {
+ .name = "mpuss_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_MPU_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu0_44xx_clkdm = {
+ .name = "mpu0_clkdm",
+ .pwrdm = { .name = "cpu0_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_PDA_CPU0_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu1_44xx_clkdm = {
+ .name = "mpu1_clkdm",
+ .pwrdm = { .name = "cpu1_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_PDA_CPU1_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_emif_44xx_clkdm = {
+ .name = "l3_emif_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_MEMIF_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_ao_44xx_clkdm = {
+ .name = "l4_ao_clkdm",
+ .pwrdm = { .name = "always_on_core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_ALWON_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ducati_44xx_clkdm = {
+ .name = "ducati_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_DUCATI_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_2_44xx_clkdm = {
+ .name = "l3_2_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L3_2_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_1_44xx_clkdm = {
+ .name = "l3_1_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_L3_1_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_d2d_44xx_clkdm = {
+ .name = "l3_d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_D2D_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain iss_44xx_clkdm = {
+ .name = "iss_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_CAM_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dss_44xx_clkdm = {
+ .name = "l3_dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_DSS_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_wkup_44xx_clkdm = {
+ .name = "l4_wkup_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_WKUP_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain emu_sys_44xx_clkdm = {
+ .name = "emu_sys_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_EMU_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dma_44xx_clkdm = {
+ .name = "l3_dma_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .clkstctrl_reg = OMAP4430_CM_SDMA_CLKSTCTRL,
+ .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
+ .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6923deb..a3a3ca0 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -55,7 +55,7 @@
/* Bits specific to each register */
/* CM_FCLKEN_IVA2 */
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
@@ -168,6 +168,12 @@
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
+/* AM35XX specific CM_ICLKEN1_CORE bits */
+#define AM35XX_EN_IPSS_MASK (1 << 4)
+#define AM35XX_EN_IPSS_SHIFT 4
+#define AM35XX_EN_UART4_MASK (1 << 23)
+#define AM35XX_EN_UART4_SHIFT 23
+
/* CM_ICLKEN2_CORE */
#define OMAP3430_EN_PKA (1 << 4)
#define OMAP3430_EN_PKA_SHIFT 4
@@ -220,6 +226,10 @@
#define OMAP3430_ST_SSI_STDBY_SHIFT 0
#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
+/* AM35xx specific CM_IDLEST1_CORE bits */
+#define AM35XX_ST_IPSS_SHIFT 5
+#define AM35XX_ST_IPSS_MASK (1 << 5)
+
/* CM_IDLEST2_CORE */
#define OMAP3430_ST_PKA_SHIFT 4
#define OMAP3430_ST_PKA_MASK (1 << 4)
@@ -336,6 +346,8 @@
#define OMAP3430_CLKSEL_L4_MASK (0x3 << 2)
#define OMAP3430_CLKSEL_L3_SHIFT 0
#define OMAP3430_CLKSEL_L3_MASK (0x3 << 0)
+#define OMAP3630_CLKSEL_96M_SHIFT 12
+#define OMAP3630_CLKSEL_96M_MASK (0x3 << 12)
/* CM_CLKSTCTRL_CORE */
#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT 4
@@ -379,6 +391,10 @@
#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1
#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK (1 << 1)
+/* CM_IDLEST_SGX */
+#define OMAP3430ES2_ST_SGX_SHIFT 1
+#define OMAP3430ES2_ST_SGX_MASK (1 << 1)
+
/* CM_ICLKEN_SGX */
#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0
#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK (1 << 0)
@@ -517,12 +533,18 @@
/* CM_CLKSEL2_PLL */
#define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
#define OMAP3430_PERIPH_DPLL_MULT_MASK (0x7ff << 8)
+#define OMAP3630_PERIPH_DPLL_MULT_MASK (0xfff << 8)
#define OMAP3430_PERIPH_DPLL_DIV_SHIFT 0
#define OMAP3430_PERIPH_DPLL_DIV_MASK (0x7f << 0)
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT 21
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK (0x7 << 21)
+#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT 24
+#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK (0xff << 24)
/* CM_CLKSEL3_PLL */
#define OMAP3430_DIV_96M_SHIFT 0
#define OMAP3430_DIV_96M_MASK (0x1f << 0)
+#define OMAP3630_DIV_96M_MASK (0x3f << 0)
/* CM_CLKSEL4_PLL */
#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT 8
@@ -569,8 +591,10 @@
/* CM_CLKSEL_DSS */
#define OMAP3430_CLKSEL_TV_SHIFT 8
#define OMAP3430_CLKSEL_TV_MASK (0x1f << 8)
+#define OMAP3630_CLKSEL_TV_MASK (0x3f << 8)
#define OMAP3430_CLKSEL_DSS1_SHIFT 0
#define OMAP3430_CLKSEL_DSS1_MASK (0x1f << 0)
+#define OMAP3630_CLKSEL_DSS1_MASK (0x3f << 0)
/* CM_SLEEPDEP_DSS specific bits */
@@ -598,6 +622,7 @@
/* CM_CLKSEL_CAM */
#define OMAP3430_CLKSEL_CAM_SHIFT 0
#define OMAP3430_CLKSEL_CAM_MASK (0x1f << 0)
+#define OMAP3630_CLKSEL_CAM_MASK (0x3f << 0)
/* CM_SLEEPDEP_CAM specific bits */
@@ -693,6 +718,7 @@
/* CM_CLKSEL1_EMU */
#define OMAP3430_DIV_DPLL4_SHIFT 24
#define OMAP3430_DIV_DPLL4_MASK (0x1f << 24)
+#define OMAP3630_DIV_DPLL4_MASK (0x3f << 24)
#define OMAP3430_DIV_DPLL3_SHIFT 16
#define OMAP3430_DIV_DPLL3_MASK (0x1f << 16)
#define OMAP3430_CLKSEL_TRACECLK_SHIFT 11
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 0e67f75..ac8458e 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -26,7 +26,7 @@
/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_ABE_DYNDEP_SHIFT (1 << 3)
+#define OMAP4430_ABE_DYNDEP_SHIFT 3
#define OMAP4430_ABE_DYNDEP_MASK BITFIELD(3, 3)
/*
@@ -34,15 +34,15 @@
* CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
* CM_TESLA_STATICDEP
*/
-#define OMAP4430_ABE_STATDEP_SHIFT (1 << 3)
+#define OMAP4430_ABE_STATDEP_SHIFT 3
#define OMAP4430_ABE_STATDEP_MASK BITFIELD(3, 3)
/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ALWONCORE_DYNDEP_SHIFT (1 << 16)
+#define OMAP4430_ALWONCORE_DYNDEP_SHIFT 16
#define OMAP4430_ALWONCORE_DYNDEP_MASK BITFIELD(16, 16)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_ALWONCORE_STATDEP_SHIFT (1 << 16)
+#define OMAP4430_ALWONCORE_STATDEP_SHIFT 16
#define OMAP4430_ALWONCORE_STATDEP_MASK BITFIELD(16, 16)
/*
@@ -50,371 +50,371 @@
* CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
* CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU
*/
-#define OMAP4430_AUTO_DPLL_MODE_SHIFT (1 << 0)
+#define OMAP4430_AUTO_DPLL_MODE_SHIFT 0
#define OMAP4430_AUTO_DPLL_MODE_MASK BITFIELD(0, 2)
/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_CEFUSE_DYNDEP_SHIFT (1 << 17)
+#define OMAP4430_CEFUSE_DYNDEP_SHIFT 17
#define OMAP4430_CEFUSE_DYNDEP_MASK BITFIELD(17, 17)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_CEFUSE_STATDEP_SHIFT (1 << 17)
+#define OMAP4430_CEFUSE_STATDEP_SHIFT 17
#define OMAP4430_CEFUSE_STATDEP_MASK BITFIELD(17, 17)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT (1 << 13)
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT 13
#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK BITFIELD(13, 13)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT (1 << 12)
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT 12
#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK BITFIELD(12, 12)
/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK BITFIELD(9, 9)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK BITFIELD(11, 11)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK BITFIELD(8, 8)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK BITFIELD(11, 11)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT (1 << 12)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT 12
#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK BITFIELD(12, 12)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT (1 << 13)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT 13
#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK BITFIELD(13, 13)
/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK BITFIELD(9, 9)
/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK BITFIELD(9, 9)
/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK BITFIELD(9, 9)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK BITFIELD(9, 9)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK BITFIELD(9, 9)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK BITFIELD(10, 10)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK BITFIELD(11, 11)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT (1 << 12)
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT 12
#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK BITFIELD(12, 12)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT (1 << 13)
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT 13
#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK BITFIELD(13, 13)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT (1 << 14)
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT 14
#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK BITFIELD(14, 14)
/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK BITFIELD(10, 10)
/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK BITFIELD(9, 9)
/* Used by CM_DUCATI_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK BITFIELD(10, 10)
/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK BITFIELD(8, 8)
/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK BITFIELD(10, 10)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT (1 << 15)
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT 15
#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK BITFIELD(15, 15)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK BITFIELD(10, 10)
/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK BITFIELD(11, 11)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT (1 << 20)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20
#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK BITFIELD(20, 20)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT (1 << 26)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26
#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK BITFIELD(26, 26)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT (1 << 21)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21
#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK BITFIELD(21, 21)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT (1 << 27)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27
#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK BITFIELD(27, 27)
/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT (1 << 31)
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT 31
#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK BITFIELD(31, 31)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT (1 << 13)
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT 13
#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK BITFIELD(13, 13)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT (1 << 12)
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT 12
#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK BITFIELD(12, 12)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT (1 << 28)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT 28
#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK BITFIELD(28, 28)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT (1 << 29)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT 29
#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK BITFIELD(29, 29)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK BITFIELD(11, 11)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT (1 << 16)
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT 16
#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK BITFIELD(16, 16)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT (1 << 17)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT 17
#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK BITFIELD(17, 17)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT (1 << 18)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT 18
#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK BITFIELD(18, 18)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT (1 << 19)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT 19
#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK BITFIELD(19, 19)
/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK BITFIELD(8, 8)
/* Used by CM_IVAHD_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT (1 << 14)
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT 14
#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK BITFIELD(14, 14)
/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_SDMA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK BITFIELD(8, 8)
/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK BITFIELD(9, 9)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK BITFIELD(9, 9)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK BITFIELD(8, 8)
/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK BITFIELD(9, 9)
/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT (1 << 12)
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT 12
#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK BITFIELD(12, 12)
/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK BITFIELD(8, 8)
/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK BITFIELD(9, 9)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT (1 << 16)
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT 16
#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK BITFIELD(16, 16)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT (1 << 17)
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17
#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK BITFIELD(17, 17)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT (1 << 18)
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18
#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK BITFIELD(18, 18)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT (1 << 19)
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19
#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK BITFIELD(19, 19)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT (1 << 25)
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT 25
#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK BITFIELD(25, 25)
/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK BITFIELD(10, 10)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT (1 << 20)
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT 20
#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK BITFIELD(20, 20)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT (1 << 21)
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT 21
#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK BITFIELD(21, 21)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT (1 << 22)
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT 22
#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK BITFIELD(22, 22)
/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT (1 << 24)
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT 24
#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK BITFIELD(24, 24)
/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK BITFIELD(10, 10)
/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK BITFIELD(9, 9)
/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK BITFIELD(11, 11)
/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK BITFIELD(10, 10)
/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT (1 << 9)
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK BITFIELD(9, 9)
/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK BITFIELD(8, 8)
/* Used by CM_TESLA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT (1 << 8)
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT 8
#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT (1 << 22)
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22
#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK BITFIELD(22, 22)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT (1 << 23)
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23
#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK BITFIELD(23, 23)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT (1 << 24)
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24
#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK BITFIELD(24, 24)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT (1 << 15)
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15
#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK BITFIELD(15, 15)
/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT (1 << 10)
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT 10
#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK BITFIELD(10, 10)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT (1 << 30)
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30
#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK BITFIELD(30, 30)
/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT (1 << 25)
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25
#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK BITFIELD(25, 25)
/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT (1 << 11)
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK BITFIELD(11, 11)
/*
@@ -426,7 +426,7 @@
* CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
* CM1_ABE_TIMER8_CLKCTRL
*/
-#define OMAP4430_CLKSEL_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_SHIFT 24
#define OMAP4430_CLKSEL_MASK BITFIELD(24, 24)
/*
@@ -434,43 +434,43 @@
* CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT,
* CM_CLKSEL_USB_60MHZ
*/
-#define OMAP4430_CLKSEL_0_0_SHIFT (1 << 0)
+#define OMAP4430_CLKSEL_0_0_SHIFT 0
#define OMAP4430_CLKSEL_0_0_MASK BITFIELD(0, 0)
/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
-#define OMAP4430_CLKSEL_0_1_SHIFT (1 << 0)
+#define OMAP4430_CLKSEL_0_1_SHIFT 0
#define OMAP4430_CLKSEL_0_1_MASK BITFIELD(0, 1)
/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
-#define OMAP4430_CLKSEL_24_25_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_24_25_SHIFT 24
#define OMAP4430_CLKSEL_24_25_MASK BITFIELD(24, 25)
/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_CLKSEL_60M_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_60M_SHIFT 24
#define OMAP4430_CLKSEL_60M_MASK BITFIELD(24, 24)
/* Used by CM1_ABE_AESS_CLKCTRL */
-#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_AESS_FCLK_MASK BITFIELD(24, 24)
/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_CORE_SHIFT (1 << 0)
+#define OMAP4430_CLKSEL_CORE_SHIFT 0
#define OMAP4430_CLKSEL_CORE_MASK BITFIELD(0, 0)
/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_CORE_1_1_SHIFT (1 << 1)
+#define OMAP4430_CLKSEL_CORE_1_1_SHIFT 1
#define OMAP4430_CLKSEL_CORE_1_1_MASK BITFIELD(1, 1)
/* Used by CM_WKUP_USIM_CLKCTRL */
-#define OMAP4430_CLKSEL_DIV_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_DIV_SHIFT 24
#define OMAP4430_CLKSEL_DIV_MASK BITFIELD(24, 24)
/* Used by CM_CAM_FDIF_CLKCTRL */
-#define OMAP4430_CLKSEL_FCLK_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_FCLK_MASK BITFIELD(24, 25)
/* Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT (1 << 25)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT 25
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK BITFIELD(25, 25)
/*
@@ -478,58 +478,58 @@
* CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
* CM1_ABE_MCBSP3_CLKCTRL
*/
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT (1 << 26)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT 26
#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK BITFIELD(26, 27)
/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L3_SHIFT (1 << 4)
+#define OMAP4430_CLKSEL_L3_SHIFT 4
#define OMAP4430_CLKSEL_L3_MASK BITFIELD(4, 4)
/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT (1 << 2)
+#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT 2
#define OMAP4430_CLKSEL_L3_SHADOW_MASK BITFIELD(2, 2)
/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L4_SHIFT (1 << 8)
+#define OMAP4430_CLKSEL_L4_SHIFT 8
#define OMAP4430_CLKSEL_L4_MASK BITFIELD(8, 8)
/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_CLKSEL_OPP_SHIFT (1 << 0)
+#define OMAP4430_CLKSEL_OPP_SHIFT 0
#define OMAP4430_CLKSEL_OPP_MASK BITFIELD(0, 1)
/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_PER_192M_SHIFT (1 << 25)
+#define OMAP4430_CLKSEL_PER_192M_SHIFT 25
#define OMAP4430_CLKSEL_PER_192M_MASK BITFIELD(25, 26)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT (1 << 27)
+#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT 27
#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK BITFIELD(27, 29)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT 24
#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK BITFIELD(24, 26)
/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_SGX_FCLK_MASK BITFIELD(24, 24)
/*
* Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
* CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
*/
-#define OMAP4430_CLKSEL_SOURCE_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_SHIFT 24
#define OMAP4430_CLKSEL_SOURCE_MASK BITFIELD(24, 25)
/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT 24
#define OMAP4430_CLKSEL_SOURCE_24_24_MASK BITFIELD(24, 24)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_CLKSEL_UTMI_P1_SHIFT (1 << 24)
+#define OMAP4430_CLKSEL_UTMI_P1_SHIFT 24
#define OMAP4430_CLKSEL_UTMI_P1_MASK BITFIELD(24, 24)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_CLKSEL_UTMI_P2_SHIFT (1 << 25)
+#define OMAP4430_CLKSEL_UTMI_P2_SHIFT 25
#define OMAP4430_CLKSEL_UTMI_P2_MASK BITFIELD(25, 25)
/*
@@ -544,23 +544,23 @@
* CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
* CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE
*/
-#define OMAP4430_CLKTRCTRL_SHIFT (1 << 0)
+#define OMAP4430_CLKTRCTRL_SHIFT 0
#define OMAP4430_CLKTRCTRL_MASK BITFIELD(0, 1)
/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT (1 << 0)
+#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT 0
#define OMAP4430_CORE_DPLL_EMU_DIV_MASK BITFIELD(0, 6)
/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT (1 << 8)
+#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT 8
#define OMAP4430_CORE_DPLL_EMU_MULT_MASK BITFIELD(8, 18)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_D2D_DYNDEP_SHIFT (1 << 18)
+#define OMAP4430_D2D_DYNDEP_SHIFT 18
#define OMAP4430_D2D_DYNDEP_MASK BITFIELD(18, 18)
/* Used by CM_MPU_STATICDEP */
-#define OMAP4430_D2D_STATDEP_SHIFT (1 << 18)
+#define OMAP4430_D2D_STATDEP_SHIFT 18
#define OMAP4430_D2D_STATDEP_MASK BITFIELD(18, 18)
/*
@@ -570,19 +570,19 @@
* CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
* CM_SSC_DELTAMSTEP_DPLL_MPU
*/
-#define OMAP4430_DELTAMSTEP_SHIFT (1 << 0)
+#define OMAP4430_DELTAMSTEP_SHIFT 0
#define OMAP4430_DELTAMSTEP_MASK BITFIELD(0, 19)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_OVERRIDE_SHIFT (1 << 2)
+#define OMAP4430_DLL_OVERRIDE_SHIFT 2
#define OMAP4430_DLL_OVERRIDE_MASK BITFIELD(2, 2)
/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */
-#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT (1 << 0)
+#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT 0
#define OMAP4430_DLL_OVERRIDE_0_0_MASK BITFIELD(0, 0)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_RESET_SHIFT (1 << 3)
+#define OMAP4430_DLL_RESET_SHIFT 3
#define OMAP4430_DLL_RESET_MASK BITFIELD(3, 3)
/*
@@ -590,40 +590,40 @@
* CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
* CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
*/
-#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT (1 << 23)
+#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT 23
#define OMAP4430_DPLL_BYP_CLKSEL_MASK BITFIELD(23, 23)
/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK BITFIELD(8, 8)
/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT (1 << 20)
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20
#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK BITFIELD(20, 20)
/*
* Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
* CM_DIV_M3_DPLL_CORE
*/
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT (1 << 0)
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT 0
#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK BITFIELD(0, 4)
/*
* Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
* CM_DIV_M3_DPLL_CORE
*/
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT 5
#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK BITFIELD(5, 5)
/*
* Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
* CM_DIV_M3_DPLL_CORE
*/
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT 8
#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK BITFIELD(8, 8)
/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT (1 << 10)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT 10
#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BITFIELD(10, 10)
/*
@@ -631,11 +631,11 @@
* CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
* CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
*/
-#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT (1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT 0
#define OMAP4430_DPLL_CLKOUT_DIV_MASK BITFIELD(0, 4)
/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT (1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT 0
#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK BITFIELD(0, 6)
/*
@@ -643,11 +643,11 @@
* CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
* CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
*/
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT 5
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK BITFIELD(5, 5)
/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT (1 << 7)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT 7
#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK BITFIELD(7, 7)
/*
@@ -655,23 +655,23 @@
* CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
* CM_DIV_M2_DPLL_MPU
*/
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BITFIELD(8, 8)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT (1 << 8)
+#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT 8
#define OMAP4430_DPLL_CORE_DPLL_EN_MASK BITFIELD(8, 10)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT (1 << 11)
+#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT 11
#define OMAP4430_DPLL_CORE_M2_DIV_MASK BITFIELD(11, 15)
/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT (1 << 3)
+#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT 3
#define OMAP4430_DPLL_CORE_M5_DIV_MASK BITFIELD(3, 7)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT (1 << 1)
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT 1
#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK BITFIELD(1, 1)
/*
@@ -679,11 +679,11 @@
* CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
* CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
*/
-#define OMAP4430_DPLL_DIV_SHIFT (1 << 0)
+#define OMAP4430_DPLL_DIV_SHIFT 0
#define OMAP4430_DPLL_DIV_MASK BITFIELD(0, 6)
/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_DIV_0_7_SHIFT (1 << 0)
+#define OMAP4430_DPLL_DIV_0_7_SHIFT 0
#define OMAP4430_DPLL_DIV_0_7_MASK BITFIELD(0, 7)
/*
@@ -691,11 +691,11 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT (1 << 8)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT 8
#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK BITFIELD(8, 8)
/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT (1 << 3)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT 3
#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK BITFIELD(3, 3)
/*
@@ -703,7 +703,7 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_EN_SHIFT (1 << 0)
+#define OMAP4430_DPLL_EN_SHIFT 0
#define OMAP4430_DPLL_EN_MASK BITFIELD(0, 2)
/*
@@ -711,7 +711,7 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_LPMODE_EN_SHIFT (1 << 10)
+#define OMAP4430_DPLL_LPMODE_EN_SHIFT 10
#define OMAP4430_DPLL_LPMODE_EN_MASK BITFIELD(10, 10)
/*
@@ -719,11 +719,11 @@
* CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
* CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
*/
-#define OMAP4430_DPLL_MULT_SHIFT (1 << 8)
+#define OMAP4430_DPLL_MULT_SHIFT 8
#define OMAP4430_DPLL_MULT_MASK BITFIELD(8, 18)
/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_MULT_USB_SHIFT (1 << 8)
+#define OMAP4430_DPLL_MULT_USB_SHIFT 8
#define OMAP4430_DPLL_MULT_USB_MASK BITFIELD(8, 19)
/*
@@ -731,11 +731,11 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_REGM4XEN_SHIFT (1 << 11)
+#define OMAP4430_DPLL_REGM4XEN_SHIFT 11
#define OMAP4430_DPLL_REGM4XEN_MASK BITFIELD(11, 11)
/* Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_SD_DIV_SHIFT (1 << 24)
+#define OMAP4430_DPLL_SD_DIV_SHIFT 24
#define OMAP4430_DPLL_SD_DIV_MASK BITFIELD(24, 31)
/*
@@ -743,7 +743,7 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_SSC_ACK_SHIFT (1 << 13)
+#define OMAP4430_DPLL_SSC_ACK_SHIFT 13
#define OMAP4430_DPLL_SSC_ACK_MASK BITFIELD(13, 13)
/*
@@ -751,7 +751,7 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT (1 << 14)
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT 14
#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK BITFIELD(14, 14)
/*
@@ -759,154 +759,154 @@
* CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
* CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
*/
-#define OMAP4430_DPLL_SSC_EN_SHIFT (1 << 12)
+#define OMAP4430_DPLL_SSC_EN_SHIFT 12
#define OMAP4430_DPLL_SSC_EN_MASK BITFIELD(12, 12)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_DSS_DYNDEP_SHIFT (1 << 8)
+#define OMAP4430_DSS_DYNDEP_SHIFT 8
#define OMAP4430_DSS_DYNDEP_MASK BITFIELD(8, 8)
/*
* Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
* CM_MPU_STATICDEP
*/
-#define OMAP4430_DSS_STATDEP_SHIFT (1 << 8)
+#define OMAP4430_DSS_STATDEP_SHIFT 8
#define OMAP4430_DSS_STATDEP_MASK BITFIELD(8, 8)
/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_DUCATI_DYNDEP_SHIFT (1 << 0)
+#define OMAP4430_DUCATI_DYNDEP_SHIFT 0
#define OMAP4430_DUCATI_DYNDEP_MASK BITFIELD(0, 0)
/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */
-#define OMAP4430_DUCATI_STATDEP_SHIFT (1 << 0)
+#define OMAP4430_DUCATI_STATDEP_SHIFT 0
#define OMAP4430_DUCATI_STATDEP_MASK BITFIELD(0, 0)
/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_FREQ_UPDATE_SHIFT (1 << 0)
+#define OMAP4430_FREQ_UPDATE_SHIFT 0
#define OMAP4430_FREQ_UPDATE_MASK BITFIELD(0, 0)
/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_GFX_DYNDEP_SHIFT (1 << 10)
+#define OMAP4430_GFX_DYNDEP_SHIFT 10
#define OMAP4430_GFX_DYNDEP_MASK BITFIELD(10, 10)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_GFX_STATDEP_SHIFT (1 << 10)
+#define OMAP4430_GFX_STATDEP_SHIFT 10
#define OMAP4430_GFX_STATDEP_MASK BITFIELD(10, 10)
/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT (1 << 0)
+#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT 0
#define OMAP4430_GPMC_FREQ_UPDATE_MASK BITFIELD(0, 0)
/*
* Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
* CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT (1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK BITFIELD(0, 4)
/*
* Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
* CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK BITFIELD(5, 5)
/*
* Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
* CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK BITFIELD(8, 8)
/*
* Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
* CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT (1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK BITFIELD(12, 12)
/*
* Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
* CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT (1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK BITFIELD(0, 4)
/*
* Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
* CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK BITFIELD(5, 5)
/*
* Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
* CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK BITFIELD(8, 8)
/*
* Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
* CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
*/
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT (1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK BITFIELD(12, 12)
/*
* Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
* CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
*/
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT (1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK BITFIELD(0, 4)
/*
* Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
* CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
*/
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK BITFIELD(5, 5)
/*
* Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
* CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
*/
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK BITFIELD(8, 8)
/*
* Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
* CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
*/
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT (1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK BITFIELD(12, 12)
/*
* Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
* CM_DIV_M7_DPLL_CORE
*/
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT (1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT 0
#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK BITFIELD(0, 4)
/*
* Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
* CM_DIV_M7_DPLL_CORE
*/
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT (1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT 5
#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK BITFIELD(5, 5)
/*
* Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
* CM_DIV_M7_DPLL_CORE
*/
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT (1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT 8
#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK BITFIELD(8, 8)
/*
* Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
* CM_DIV_M7_DPLL_CORE
*/
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT (1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT 12
#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK BITFIELD(12, 12)
/*
@@ -962,22 +962,22 @@
* CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
* CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
*/
-#define OMAP4430_IDLEST_SHIFT (1 << 16)
+#define OMAP4430_IDLEST_SHIFT 16
#define OMAP4430_IDLEST_MASK BITFIELD(16, 17)
/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ISS_DYNDEP_SHIFT (1 << 9)
+#define OMAP4430_ISS_DYNDEP_SHIFT 9
#define OMAP4430_ISS_DYNDEP_MASK BITFIELD(9, 9)
/*
* Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
* CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_ISS_STATDEP_SHIFT (1 << 9)
+#define OMAP4430_ISS_STATDEP_SHIFT 9
#define OMAP4430_ISS_STATDEP_MASK BITFIELD(9, 9)
/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_IVAHD_DYNDEP_SHIFT (1 << 2)
+#define OMAP4430_IVAHD_DYNDEP_SHIFT 2
#define OMAP4430_IVAHD_DYNDEP_MASK BITFIELD(2, 2)
/*
@@ -986,25 +986,25 @@
* CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP,
* CM_TESLA_STATICDEP
*/
-#define OMAP4430_IVAHD_STATDEP_SHIFT (1 << 2)
+#define OMAP4430_IVAHD_STATDEP_SHIFT 2
#define OMAP4430_IVAHD_STATDEP_MASK BITFIELD(2, 2)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L3INIT_DYNDEP_SHIFT (1 << 7)
+#define OMAP4430_L3INIT_DYNDEP_SHIFT 7
#define OMAP4430_L3INIT_DYNDEP_MASK BITFIELD(7, 7)
/*
* Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
* CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_L3INIT_STATDEP_SHIFT (1 << 7)
+#define OMAP4430_L3INIT_STATDEP_SHIFT 7
#define OMAP4430_L3INIT_STATDEP_MASK BITFIELD(7, 7)
/*
* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
* CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
*/
-#define OMAP4430_L3_1_DYNDEP_SHIFT (1 << 5)
+#define OMAP4430_L3_1_DYNDEP_SHIFT 5
#define OMAP4430_L3_1_DYNDEP_MASK BITFIELD(5, 5)
/*
@@ -1013,7 +1013,7 @@
* CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
* CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_L3_1_STATDEP_SHIFT (1 << 5)
+#define OMAP4430_L3_1_STATDEP_SHIFT 5
#define OMAP4430_L3_1_STATDEP_MASK BITFIELD(5, 5)
/*
@@ -1022,7 +1022,7 @@
* CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
* CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP
*/
-#define OMAP4430_L3_2_DYNDEP_SHIFT (1 << 6)
+#define OMAP4430_L3_2_DYNDEP_SHIFT 6
#define OMAP4430_L3_2_DYNDEP_MASK BITFIELD(6, 6)
/*
@@ -1031,11 +1031,11 @@
* CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
* CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_L3_2_STATDEP_SHIFT (1 << 6)
+#define OMAP4430_L3_2_STATDEP_SHIFT 6
#define OMAP4430_L3_2_STATDEP_MASK BITFIELD(6, 6)
/* Used by CM_L3_1_DYNAMICDEP */
-#define OMAP4430_L4CFG_DYNDEP_SHIFT (1 << 12)
+#define OMAP4430_L4CFG_DYNDEP_SHIFT 12
#define OMAP4430_L4CFG_DYNDEP_MASK BITFIELD(12, 12)
/*
@@ -1043,11 +1043,11 @@
* CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
* CM_TESLA_STATICDEP
*/
-#define OMAP4430_L4CFG_STATDEP_SHIFT (1 << 12)
+#define OMAP4430_L4CFG_STATDEP_SHIFT 12
#define OMAP4430_L4CFG_STATDEP_MASK BITFIELD(12, 12)
/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_L4PER_DYNDEP_SHIFT (1 << 13)
+#define OMAP4430_L4PER_DYNDEP_SHIFT 13
#define OMAP4430_L4PER_DYNDEP_MASK BITFIELD(13, 13)
/*
@@ -1055,36 +1055,36 @@
* CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
* CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_L4PER_STATDEP_SHIFT (1 << 13)
+#define OMAP4430_L4PER_STATDEP_SHIFT 13
#define OMAP4430_L4PER_STATDEP_MASK BITFIELD(13, 13)
/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L4SEC_DYNDEP_SHIFT (1 << 14)
+#define OMAP4430_L4SEC_DYNDEP_SHIFT 14
#define OMAP4430_L4SEC_DYNDEP_MASK BITFIELD(14, 14)
/*
* Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
* CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP
*/
-#define OMAP4430_L4SEC_STATDEP_SHIFT (1 << 14)
+#define OMAP4430_L4SEC_STATDEP_SHIFT 14
#define OMAP4430_L4SEC_STATDEP_MASK BITFIELD(14, 14)
/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_L4WKUP_DYNDEP_SHIFT (1 << 15)
+#define OMAP4430_L4WKUP_DYNDEP_SHIFT 15
#define OMAP4430_L4WKUP_DYNDEP_MASK BITFIELD(15, 15)
/*
* Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
* CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_L4WKUP_STATDEP_SHIFT (1 << 15)
+#define OMAP4430_L4WKUP_STATDEP_SHIFT 15
#define OMAP4430_L4WKUP_STATDEP_MASK BITFIELD(15, 15)
/*
* Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
* CM_MPU_DYNAMICDEP
*/
-#define OMAP4430_MEMIF_DYNDEP_SHIFT (1 << 4)
+#define OMAP4430_MEMIF_DYNDEP_SHIFT 4
#define OMAP4430_MEMIF_DYNDEP_MASK BITFIELD(4, 4)
/*
@@ -1093,7 +1093,7 @@
* CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
* CM_MPU_STATICDEP, CM_TESLA_STATICDEP
*/
-#define OMAP4430_MEMIF_STATDEP_SHIFT (1 << 4)
+#define OMAP4430_MEMIF_STATDEP_SHIFT 4
#define OMAP4430_MEMIF_STATDEP_MASK BITFIELD(4, 4)
/*
@@ -1103,7 +1103,7 @@
* CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
* CM_SSC_MODFREQDIV_DPLL_MPU
*/
-#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT (1 << 8)
+#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT 8
#define OMAP4430_MODFREQDIV_EXPONENT_MASK BITFIELD(8, 10)
/*
@@ -1113,7 +1113,7 @@
* CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
* CM_SSC_MODFREQDIV_DPLL_MPU
*/
-#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT (1 << 0)
+#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT 0
#define OMAP4430_MODFREQDIV_MANTISSA_MASK BITFIELD(0, 6)
/*
@@ -1169,23 +1169,23 @@
* CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
* CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
*/
-#define OMAP4430_MODULEMODE_SHIFT (1 << 0)
+#define OMAP4430_MODULEMODE_SHIFT 0
#define OMAP4430_MODULEMODE_MASK BITFIELD(0, 1)
/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK BITFIELD(9, 9)
/* Used by CM_WKUP_BANDGAP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT 8
#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT 9
#define OMAP4430_OPTFCLKEN_CLK32K_MASK BITFIELD(9, 9)
/* Used by CM_CAM_ISS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK BITFIELD(8, 8)
/*
@@ -1195,119 +1195,119 @@
* CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
* CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE
*/
-#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_DBCLK_MASK BITFIELD(8, 8)
/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK BITFIELD(8, 8)
/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_DSSCLK_MASK BITFIELD(8, 8)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT 8
#define OMAP4430_OPTFCLKEN_FCLK0_MASK BITFIELD(8, 8)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT 9
#define OMAP4430_OPTFCLKEN_FCLK1_MASK BITFIELD(9, 9)
/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT (1 << 10)
+#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT 10
#define OMAP4430_OPTFCLKEN_FCLK2_MASK BITFIELD(10, 10)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT (1 << 15)
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT 15
#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK BITFIELD(15, 15)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT (1 << 13)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13
#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK BITFIELD(13, 13)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT (1 << 14)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14
#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK BITFIELD(14, 14)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT (1 << 11)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11
#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK BITFIELD(11, 11)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT (1 << 12)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12
#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK BITFIELD(12, 12)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK BITFIELD(8, 8)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK BITFIELD(9, 9)
/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT 8
#define OMAP4430_OPTFCLKEN_PHY_48M_MASK BITFIELD(8, 8)
/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT (1 << 10)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK BITFIELD(10, 10)
/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT (1 << 11)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT 11
#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK BITFIELD(11, 11)
/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT (1 << 10)
+#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK BITFIELD(10, 10)
/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT (1 << 11)
+#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11
#define OMAP4430_OPTFCLKEN_TV_CLK_MASK BITFIELD(11, 11)
/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK BITFIELD(9, 9)
/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT (1 << 10)
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK BITFIELD(10, 10)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK BITFIELD(8, 8)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT (1 << 9)
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK BITFIELD(9, 9)
/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT (1 << 10)
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK BITFIELD(10, 10)
/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_XCLK_SHIFT (1 << 8)
+#define OMAP4430_OPTFCLKEN_XCLK_SHIFT 8
#define OMAP4430_OPTFCLKEN_XCLK_MASK BITFIELD(8, 8)
/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_OVERRIDE_ENABLE_SHIFT (1 << 19)
+#define OMAP4430_OVERRIDE_ENABLE_SHIFT 19
#define OMAP4430_OVERRIDE_ENABLE_MASK BITFIELD(19, 19)
/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_PAD_CLKS_GATE_SHIFT (1 << 8)
+#define OMAP4430_PAD_CLKS_GATE_SHIFT 8
#define OMAP4430_PAD_CLKS_GATE_MASK BITFIELD(8, 8)
/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
-#define OMAP4430_PERF_CURRENT_SHIFT (1 << 0)
+#define OMAP4430_PERF_CURRENT_SHIFT 0
#define OMAP4430_PERF_CURRENT_MASK BITFIELD(0, 7)
/*
@@ -1315,66 +1315,66 @@
* CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
* CM_IVA_DVFS_PERF_TESLA
*/
-#define OMAP4430_PERF_REQ_SHIFT (1 << 0)
+#define OMAP4430_PERF_REQ_SHIFT 0
#define OMAP4430_PERF_REQ_MASK BITFIELD(0, 7)
/* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT (1 << 0)
+#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT 0
#define OMAP4430_PER_DPLL_EMU_DIV_MASK BITFIELD(0, 6)
/* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT (1 << 8)
+#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT 8
#define OMAP4430_PER_DPLL_EMU_MULT_MASK BITFIELD(8, 18)
/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE1_COMPLETED_SHIFT (1 << 0)
+#define OMAP4430_PHASE1_COMPLETED_SHIFT 0
#define OMAP4430_PHASE1_COMPLETED_MASK BITFIELD(0, 0)
/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2A_COMPLETED_SHIFT (1 << 1)
+#define OMAP4430_PHASE2A_COMPLETED_SHIFT 1
#define OMAP4430_PHASE2A_COMPLETED_MASK BITFIELD(1, 1)
/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2B_COMPLETED_SHIFT (1 << 2)
+#define OMAP4430_PHASE2B_COMPLETED_SHIFT 2
#define OMAP4430_PHASE2B_COMPLETED_MASK BITFIELD(2, 2)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT (1 << 20)
+#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT 20
#define OMAP4430_PMD_STM_MUX_CTRL_MASK BITFIELD(20, 21)
/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT (1 << 22)
+#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT 22
#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK BITFIELD(22, 23)
/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP4430_PRESCAL_SHIFT (1 << 0)
+#define OMAP4430_PRESCAL_SHIFT 0
#define OMAP4430_PRESCAL_MASK BITFIELD(0, 5)
/* Used by REVISION_CM2, REVISION_CM1 */
-#define OMAP4430_REV_SHIFT (1 << 0)
+#define OMAP4430_REV_SHIFT 0
#define OMAP4430_REV_MASK BITFIELD(0, 7)
/*
* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
* CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
*/
-#define OMAP4430_SAR_MODE_SHIFT (1 << 4)
+#define OMAP4430_SAR_MODE_SHIFT 4
#define OMAP4430_SAR_MODE_MASK BITFIELD(4, 4)
/* Used by CM_SCALE_FCLK */
-#define OMAP4430_SCALE_FCLK_SHIFT (1 << 0)
+#define OMAP4430_SCALE_FCLK_SHIFT 0
#define OMAP4430_SCALE_FCLK_MASK BITFIELD(0, 0)
/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_SDMA_DYNDEP_SHIFT (1 << 11)
+#define OMAP4430_SDMA_DYNDEP_SHIFT 11
#define OMAP4430_SDMA_DYNDEP_MASK BITFIELD(11, 11)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_SDMA_STATDEP_SHIFT (1 << 11)
+#define OMAP4430_SDMA_STATDEP_SHIFT 11
#define OMAP4430_SDMA_STATDEP_MASK BITFIELD(11, 11)
/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT (1 << 10)
+#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT 10
#define OMAP4430_SLIMBUS_CLK_GATE_MASK BITFIELD(10, 10)
/*
@@ -1390,7 +1390,7 @@
* CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
* CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL
*/
-#define OMAP4430_STBYST_SHIFT (1 << 18)
+#define OMAP4430_STBYST_SHIFT 18
#define OMAP4430_STBYST_MASK BITFIELD(18, 18)
/*
@@ -1398,11 +1398,11 @@
* CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
* CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU
*/
-#define OMAP4430_ST_DPLL_CLK_SHIFT (1 << 0)
+#define OMAP4430_ST_DPLL_CLK_SHIFT 0
#define OMAP4430_ST_DPLL_CLK_MASK BITFIELD(0, 0)
/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT (1 << 9)
+#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT 9
#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK BITFIELD(9, 9)
/*
@@ -1410,58 +1410,58 @@
* CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
* CM_DIV_M2_DPLL_MPU
*/
-#define OMAP4430_ST_DPLL_CLKOUT_SHIFT (1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUT_SHIFT 9
#define OMAP4430_ST_DPLL_CLKOUT_MASK BITFIELD(9, 9)
/*
* Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
* CM_DIV_M3_DPLL_CORE
*/
-#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT (1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT 9
#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK BITFIELD(9, 9)
/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
-#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT (1 << 11)
+#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT 11
#define OMAP4430_ST_DPLL_CLKOUTX2_MASK BITFIELD(11, 11)
/*
* Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
* CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
*/
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT (1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT 9
#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK BITFIELD(9, 9)
/*
* Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
* CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
*/
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT (1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT 9
#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK BITFIELD(9, 9)
/*
* Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
* CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
*/
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT (1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT 9
#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK BITFIELD(9, 9)
/*
* Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
* CM_DIV_M7_DPLL_CORE
*/
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT (1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT 9
#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK BITFIELD(9, 9)
/* Used by CM_SYS_CLKSEL */
-#define OMAP4430_SYS_CLKSEL_SHIFT (1 << 0)
+#define OMAP4430_SYS_CLKSEL_SHIFT 0
#define OMAP4430_SYS_CLKSEL_MASK BITFIELD(0, 2)
/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_TESLA_DYNDEP_SHIFT (1 << 1)
+#define OMAP4430_TESLA_DYNDEP_SHIFT 1
#define OMAP4430_TESLA_DYNDEP_MASK BITFIELD(1, 1)
/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_TESLA_STATDEP_SHIFT (1 << 1)
+#define OMAP4430_TESLA_STATDEP_SHIFT 1
#define OMAP4430_TESLA_STATDEP_MASK BITFIELD(1, 1)
/*
@@ -1469,6 +1469,6 @@
* CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
* CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
*/
-#define OMAP4430_WINDOWSIZE_SHIFT (1 << 24)
+#define OMAP4430_WINDOWSIZE_SHIFT 24
#define OMAP4430_WINDOWSIZE_MASK BITFIELD(24, 27)
#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 90a4086..94728b1 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -67,7 +67,8 @@
#define CM_CLKSEL 0x0040
#define CM_CLKSEL1 CM_CLKSEL
#define CM_CLKSEL2 0x0044
-#define CM_CLKSTCTRL 0x0048
+#define OMAP2_CM_CLKSTCTRL 0x0048
+#define OMAP4_CM_CLKSTCTRL 0x0000
/* Architecture-specific registers */
@@ -88,7 +89,7 @@
#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3 CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
#define OMAP3430_CM_CLKSTST 0x004c
#define OMAP3430ES2_CM_CLKSEL4 0x004c
#define OMAP3430ES2_CM_CLKSEL5 0x0050
@@ -138,5 +139,8 @@
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX (1 << 0)
+/* CM_IDLEST indicator */
+#define OMAP24XX_CM_IDLEST_VAL 0
+#define OMAP34XX_CM_IDLEST_VAL 1
#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index cdd1f35..43f8a33 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -140,7 +140,11 @@
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- omap2_ctrl_base = omap2_globals->ctrl;
+ /* Static mapping, never released */
+ if (omap2_globals->ctrl) {
+ omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
+ WARN_ON(!omap2_ctrl_base);
+ }
}
void __iomem *omap_ctrl_base_get(void)
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 12f0cbf..3d3d035 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -45,6 +45,8 @@
#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
+#define OMAP3_STATE_MAX OMAP3_STATE_C7
+
struct omap3_processor_cx {
u8 valid;
u8 type;
@@ -60,6 +62,30 @@
struct omap3_processor_cx current_cx_state;
struct powerdomain *mpu_pd, *core_pd;
+/*
+ * The latencies/thresholds for various C states have
+ * to be configured from the respective board files.
+ * These are some default values (which might not provide
+ * the best power savings) used on boards which do not
+ * pass these details from the board file.
+ */
+static struct cpuidle_params cpuidle_params_table[] = {
+ /* C1 */
+ {1, 2, 2, 5},
+ /* C2 */
+ {1, 10, 10, 30},
+ /* C3 */
+ {1, 50, 50, 300},
+ /* C4 */
+ {1, 1500, 1800, 4000},
+ /* C5 */
+ {1, 2500, 7500, 12000},
+ /* C6 */
+ {1, 3000, 8500, 15000},
+ /* C7 */
+ {1, 10000, 30000, 300000},
+};
+
static int omap3_idle_bm_check(void)
{
if (!omap3_can_sleep())
@@ -104,13 +130,6 @@
local_irq_disable();
local_fiq_disable();
- if (!enable_off_mode) {
- if (mpu_state < PWRDM_POWER_RET)
- mpu_state = PWRDM_POWER_RET;
- if (core_state < PWRDM_POWER_RET)
- core_state = PWRDM_POWER_RET;
- }
-
pwrdm_set_next_pwrst(mpu_pd, mpu_state);
pwrdm_set_next_pwrst(core_pd, core_state);
@@ -141,6 +160,67 @@
}
/**
+ * next_valid_state - Find next valid c-state
+ * @dev: cpuidle device
+ * @state: Currently selected c-state
+ *
+ * If the current state is valid, it is returned back to the caller.
+ * Else, this function searches for a lower c-state which is still
+ * valid (as defined in omap3_power_states[]).
+ */
+static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
+ struct cpuidle_state *curr)
+{
+ struct cpuidle_state *next = NULL;
+ struct omap3_processor_cx *cx;
+
+ cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
+
+ /* Check if current state is valid */
+ if (cx->valid) {
+ return curr;
+ } else {
+ u8 idx = OMAP3_STATE_MAX;
+
+ /*
+ * Reach the current state starting at highest C-state
+ */
+ for (; idx >= OMAP3_STATE_C1; idx--) {
+ if (&dev->states[idx] == curr) {
+ next = &dev->states[idx];
+ break;
+ }
+ }
+
+ /*
+ * Should never hit this condition.
+ */
+ WARN_ON(next == NULL);
+
+ /*
+ * Drop to next valid state.
+ * Start search from the next (lower) state.
+ */
+ idx--;
+ for (; idx >= OMAP3_STATE_C1; idx--) {
+ struct omap3_processor_cx *cx;
+
+ cx = cpuidle_get_statedata(&dev->states[idx]);
+ if (cx->valid) {
+ next = &dev->states[idx];
+ break;
+ }
+ }
+ /*
+ * C1 and C2 are always valid.
+ * So, no need to check for 'next==NULL' outside this loop.
+ */
+ }
+
+ return next;
+}
+
+/**
* omap3_enter_idle_bm - Checks for any bus activity
* @dev: cpuidle device
* @state: The target state to be programmed
@@ -152,7 +232,7 @@
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
- struct cpuidle_state *new_state = state;
+ struct cpuidle_state *new_state = next_valid_state(dev, state);
if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
BUG_ON(!dev->safe_state);
@@ -165,6 +245,50 @@
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+/**
+ * omap3_cpuidle_update_states - Update the cpuidle states.
+ *
+ * Currently, this function toggles the validity of idle states based upon
+ * the flag 'enable_off_mode'. When the flag is set all states are valid.
+ * Else, states leading to OFF state set to be invalid.
+ */
+void omap3_cpuidle_update_states(void)
+{
+ int i;
+
+ for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+ struct omap3_processor_cx *cx = &omap3_power_states[i];
+
+ if (enable_off_mode) {
+ cx->valid = 1;
+ } else {
+ if ((cx->mpu_state == PWRDM_POWER_OFF) ||
+ (cx->core_state == PWRDM_POWER_OFF))
+ cx->valid = 0;
+ }
+ }
+}
+
+void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+ int i;
+
+ if (!cpuidle_board_params)
+ return;
+
+ for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+ cpuidle_params_table[i].valid =
+ cpuidle_board_params[i].valid;
+ cpuidle_params_table[i].sleep_latency =
+ cpuidle_board_params[i].sleep_latency;
+ cpuidle_params_table[i].wake_latency =
+ cpuidle_board_params[i].wake_latency;
+ cpuidle_params_table[i].threshold =
+ cpuidle_board_params[i].threshold;
+ }
+ return;
+}
+
/* omap3_init_power_states - Initialises the OMAP3 specific C states.
*
* Below is the desciption of each C state.
@@ -179,75 +303,103 @@
void omap_init_power_states(void)
{
/* C1 . MPU WFI + Core active */
- omap3_power_states[OMAP3_STATE_C1].valid = 1;
+ omap3_power_states[OMAP3_STATE_C1].valid =
+ cpuidle_params_table[OMAP3_STATE_C1].valid;
omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
- omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
- omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
- omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+ omap3_power_states[OMAP3_STATE_C1].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C1].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C1].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C1].wake_latency;
+ omap3_power_states[OMAP3_STATE_C1].threshold =
+ cpuidle_params_table[OMAP3_STATE_C1].threshold;
omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
/* C2 . MPU WFI + Core inactive */
- omap3_power_states[OMAP3_STATE_C2].valid = 1;
+ omap3_power_states[OMAP3_STATE_C2].valid =
+ cpuidle_params_table[OMAP3_STATE_C2].valid;
omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
- omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
- omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
- omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+ omap3_power_states[OMAP3_STATE_C2].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C2].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C2].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C2].wake_latency;
+ omap3_power_states[OMAP3_STATE_C2].threshold =
+ cpuidle_params_table[OMAP3_STATE_C2].threshold;
omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
/* C3 . MPU CSWR + Core inactive */
- omap3_power_states[OMAP3_STATE_C3].valid = 1;
+ omap3_power_states[OMAP3_STATE_C3].valid =
+ cpuidle_params_table[OMAP3_STATE_C3].valid;
omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
- omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
- omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
- omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+ omap3_power_states[OMAP3_STATE_C3].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C3].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C3].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C3].wake_latency;
+ omap3_power_states[OMAP3_STATE_C3].threshold =
+ cpuidle_params_table[OMAP3_STATE_C3].threshold;
omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C4 . MPU OFF + Core inactive */
- omap3_power_states[OMAP3_STATE_C4].valid = 1;
+ omap3_power_states[OMAP3_STATE_C4].valid =
+ cpuidle_params_table[OMAP3_STATE_C4].valid;
omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
- omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
- omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
- omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+ omap3_power_states[OMAP3_STATE_C4].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C4].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C4].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C4].wake_latency;
+ omap3_power_states[OMAP3_STATE_C4].threshold =
+ cpuidle_params_table[OMAP3_STATE_C4].threshold;
omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C5 . MPU CSWR + Core CSWR*/
- omap3_power_states[OMAP3_STATE_C5].valid = 1;
+ omap3_power_states[OMAP3_STATE_C5].valid =
+ cpuidle_params_table[OMAP3_STATE_C5].valid;
omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
- omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
- omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
- omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+ omap3_power_states[OMAP3_STATE_C5].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C5].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C5].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C5].wake_latency;
+ omap3_power_states[OMAP3_STATE_C5].threshold =
+ cpuidle_params_table[OMAP3_STATE_C5].threshold;
omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C6 . MPU OFF + Core CSWR */
- omap3_power_states[OMAP3_STATE_C6].valid = 1;
+ omap3_power_states[OMAP3_STATE_C6].valid =
+ cpuidle_params_table[OMAP3_STATE_C6].valid;
omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
- omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
- omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
- omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+ omap3_power_states[OMAP3_STATE_C6].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C6].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C6].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C6].wake_latency;
+ omap3_power_states[OMAP3_STATE_C6].threshold =
+ cpuidle_params_table[OMAP3_STATE_C6].threshold;
omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C7 . MPU OFF + Core OFF */
- omap3_power_states[OMAP3_STATE_C7].valid = 1;
+ omap3_power_states[OMAP3_STATE_C7].valid =
+ cpuidle_params_table[OMAP3_STATE_C7].valid;
omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
- omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
- omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
- omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+ omap3_power_states[OMAP3_STATE_C7].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C7].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C7].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C7].wake_latency;
+ omap3_power_states[OMAP3_STATE_C7].threshold =
+ cpuidle_params_table[OMAP3_STATE_C7].threshold;
omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
@@ -302,6 +454,8 @@
return -EINVAL;
dev->state_count = count;
+ omap3_cpuidle_update_states();
+
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
__func__);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 18ad9316..23e4d77 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -141,7 +141,7 @@
#define MBOX_REG_SIZE 0x120
#ifdef CONFIG_ARCH_OMAP2
-static struct resource omap_mbox_resources[] = {
+static struct resource omap2_mbox_resources[] = {
{
.start = OMAP24XX_MAILBOX_BASE,
.end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -156,10 +156,14 @@
.flags = IORESOURCE_IRQ,
},
};
+static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
+#else
+#define omap2_mbox_resources NULL
+#define omap2_mbox_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP3
-static struct resource omap_mbox_resources[] = {
+static struct resource omap3_mbox_resources[] = {
{
.start = OMAP34XX_MAILBOX_BASE,
.end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -170,12 +174,16 @@
.flags = IORESOURCE_IRQ,
},
};
+static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
+#else
+#define omap3_mbox_resources NULL
+#define omap3_mbox_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP4
#define OMAP4_MBOX_REG_SIZE 0x130
-static struct resource omap_mbox_resources[] = {
+static struct resource omap4_mbox_resources[] = {
{
.start = OMAP44XX_MAILBOX_BASE,
.end = OMAP44XX_MAILBOX_BASE +
@@ -183,10 +191,14 @@
.flags = IORESOURCE_MEM,
},
{
- .start = INT_44XX_MAIL_U0_MPU,
+ .start = OMAP44XX_IRQ_MAIL_U0,
.flags = IORESOURCE_IRQ,
},
};
+static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
+#else
+#define omap4_mbox_resources NULL
+#define omap4_mbox_resources_sz 0
#endif
static struct platform_device mbox_device = {
@@ -196,9 +208,15 @@
static inline void omap_init_mbox(void)
{
- if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
- mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
- mbox_device.resource = omap_mbox_resources;
+ if (cpu_is_omap24xx()) {
+ mbox_device.resource = omap2_mbox_resources;
+ mbox_device.num_resources = omap2_mbox_resources_sz;
+ } else if (cpu_is_omap34xx()) {
+ mbox_device.resource = omap3_mbox_resources;
+ mbox_device.num_resources = omap3_mbox_resources_sz;
+ } else if (cpu_is_omap44xx()) {
+ mbox_device.resource = omap4_mbox_resources;
+ mbox_device.num_resources = omap4_mbox_resources_sz;
} else {
pr_err("%s: platform not supported\n", __func__);
return;
@@ -492,7 +510,12 @@
**/
static void __init omap_hsmmc_reset(void)
{
- u32 i, nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
+ u32 i, nr_controllers;
+
+ if (cpu_is_omap242x())
+ return;
+
+ nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
for (i = 0; i < nr_controllers; i++) {
@@ -697,13 +720,13 @@
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
- irq = INT_44XX_MMC4_IRQ;
+ irq = OMAP44XX_IRQ_MMC4;
break;
case 4:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
- irq = INT_44XX_MMC5_IRQ;
+ irq = OMAP44XX_IRQ_MMC4;
break;
default:
continue;
@@ -715,7 +738,7 @@
} else if (cpu_is_omap44xx()) {
if (i < 3) {
base += OMAP4_MMC_REG_OFFSET;
- irq += IRQ_GIC_START;
+ irq += OMAP44XX_IRQ_GIC_START;
}
size = OMAP4_HSMMC_SIZE;
name = "mmci-omap-hs";
diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll3xxx.c
similarity index 84%
rename from arch/arm/mach-omap2/dpll.c
rename to arch/arm/mach-omap2/dpll3xxx.c
index f6055b4..b32ccd95 100644
--- a/arch/arm/mach-omap2/dpll.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -1,11 +1,14 @@
/*
* OMAP3/4 - specific DPLL control functions
*
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -15,7 +18,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
@@ -23,13 +25,10 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/limits.h>
#include <linux/bitops.h>
#include <plat/cpu.h>
#include <plat/clock.h>
-#include <plat/sram.h>
-#include <asm/div64.h>
#include <asm/clkdev.h>
#include "clock.h"
@@ -44,17 +43,7 @@
#define MAX_DPLL_WAIT_TRIES 1000000
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
- return omap2_get_dpll_rate(clk);
-}
+/* Private functions */
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
@@ -136,8 +125,6 @@
return f;
}
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
/*
* _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
* @clk: pointer to a DPLL struct clk
@@ -238,6 +225,122 @@
}
/**
+ * lookup_dco_sddiv - Set j-type DPLL4 compensation variables
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
+ u8 n)
+{
+ unsigned long fint, clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = clk->parent->rate;
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. No jitter correction for OMAP4 and 3630
+ * since freqsel field is no longer present
+ */
+ if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ __raw_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= m << __ffs(dd->mult_mask);
+ v |= (n - 1) << __ffs(dd->div1_mask);
+
+ /*
+ * XXX This code is not needed for 3430/AM35XX; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+ if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
+ u8 dco, sd_div;
+ lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
+ /* XXX This probably will need revision for OMAP4 */
+ v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
+ | OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+ v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
+ v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+ }
+
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk *clk)
+{
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
* omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
* @clk: pointer to a DPLL struct clk
*
@@ -292,48 +395,6 @@
/* Non-CORE DPLL rate set code */
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock.. Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /* Set jitter correction */
- if (!cpu_is_omap44xx()) {
- v = __raw_readl(dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- __raw_writel(v, dd->control_reg);
- }
-
- /* Set DPLL multiplier, divider */
- v = __raw_readl(dd->mult_div1_reg);
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= m << __ffs(dd->mult_mask);
- v |= (n - 1) << __ffs(dd->div1_mask);
- __raw_writel(v, dd->mult_div1_reg);
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
/**
* omap3_noncore_dpll_set_rate - set non-core DPLL rate
* @clk: struct clk * of DPLL to set
@@ -384,8 +445,8 @@
if (dd->last_rounded_rate == 0)
return -EINVAL;
- /* No freqsel on OMAP4 */
- if (!cpu_is_omap44xx()) {
+ /* No freqsel on OMAP4 and OMAP3630 */
+ if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
if (!freqsel)
@@ -530,7 +591,7 @@
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
rate = clk->parent->rate;
else
rate = clk->parent->rate * 2;
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index ec0d984..9c442e2 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -56,6 +56,9 @@
static int __init emu_init(void)
{
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
amba_device_register(&omap3_etb_device, &iomem_resource);
amba_device_register(&omap3_etm_device, &iomem_resource);
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
new file mode 100644
index 0000000..64d74f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -0,0 +1,139 @@
+/*
+ * gpmc-nand.c
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <plat/nand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+
+#define WR_RD_PIN_MONITORING 0x00600000
+
+static struct omap_nand_platform_data *gpmc_nand_data;
+
+static struct resource gpmc_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gpmc_nand_device = {
+ .name = "omap2-nand",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &gpmc_nand_resource,
+};
+
+static int omap2_nand_gpmc_retime(void)
+{
+ struct gpmc_timings t;
+ int err;
+
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
+ t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
+ t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+
+ /* Read */
+ t.adv_rd_off = gpmc_round_ns_to_ticks(
+ gpmc_nand_data->gpmc_t->adv_rd_off);
+ t.oe_on = t.adv_on;
+ t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
+ t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
+ t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
+ t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+
+ /* Write */
+ t.adv_wr_off = gpmc_round_ns_to_ticks(
+ gpmc_nand_data->gpmc_t->adv_wr_off);
+ t.we_on = t.oe_on;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
+ gpmc_nand_data->gpmc_t->wr_data_mux_bus);
+ t.wr_access = gpmc_round_ns_to_ticks(
+ gpmc_nand_data->gpmc_t->wr_access);
+ }
+ t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
+ t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
+ t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+
+ /* Configure GPMC */
+ gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
+ GPMC_CONFIG1_DEVICETYPE_NAND);
+
+ err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int gpmc_nand_setup(void)
+{
+ struct device *dev = &gpmc_nand_device.dev;
+
+ /* Set timings in GPMC */
+ if (omap2_nand_gpmc_retime() < 0) {
+ dev_err(dev, "Unable to set gpmc timings\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+{
+ unsigned int val;
+ int err = 0;
+ struct device *dev = &gpmc_nand_device.dev;
+
+ gpmc_nand_data = _nand_data;
+ gpmc_nand_data->nand_setup = gpmc_nand_setup;
+ gpmc_nand_device.dev.platform_data = gpmc_nand_data;
+
+ err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
+ &gpmc_nand_data->phys_base);
+ if (err < 0) {
+ dev_err(dev, "Cannot request GPMC CS\n");
+ return err;
+ }
+
+ err = gpmc_nand_setup();
+ if (err < 0) {
+ dev_err(dev, "NAND platform setup failed: %d\n", err);
+ return err;
+ }
+
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ val = gpmc_cs_read_reg(gpmc_nand_data->cs,
+ GPMC_CS_CONFIG1);
+ val |= WR_RD_PIN_MONITORING;
+ gpmc_cs_write_reg(gpmc_nand_data->cs,
+ GPMC_CS_CONFIG1, val);
+ }
+
+ err = platform_device_register(&gpmc_nand_device);
+ if (err < 0) {
+ dev_err(dev, "Unable to register NAND device\n");
+ goto out_free_cs;
+ }
+
+ return 0;
+
+out_free_cs:
+ gpmc_cs_free(gpmc_nand_data->cs);
+
+ return err;
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 7027cdc..5bc3ca0 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -552,9 +552,10 @@
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_gpmc_regs gpmc_context;
-void omap3_gpmc_save_context()
+void omap3_gpmc_save_context(void)
{
int i;
+
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
@@ -583,9 +584,10 @@
}
}
-void omap3_gpmc_restore_context()
+void omap3_gpmc_restore_context(void)
{
int i;
+
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
new file mode 100644
index 0000000..9ad2295
--- /dev/null
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -0,0 +1,266 @@
+/*
+ * linux/arch/arm/mach-omap2/hsmmc.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/omap-pm.h>
+
+#include "hsmmc.h"
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+
+#define HSMMC_NAME_LEN 9
+
+static struct hsmmc_controller {
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+
+static int hsmmc_get_context_loss(struct device *dev)
+{
+ return omap_pm_get_dev_context_loss_count(dev);
+}
+
+#else
+#define hsmmc_get_context_loss NULL
+#endif
+
+static void hsmmc1_before_set_reg(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ u32 reg, prog_io;
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ if (mmc->slots[0].remux)
+ mmc->slots[0].remux(dev, slot, power_on);
+
+ /*
+ * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
+ * 1.8V and 3.0V modes, controlled by the PBIAS register.
+ *
+ * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+ * is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
+ */
+ if (power_on) {
+ if (cpu_is_omap2430()) {
+ reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+ if ((1 << vdd) >= MMC_VDD_30_31)
+ reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+ else
+ reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+ omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+ }
+
+ if (mmc->slots[0].internal_clock) {
+ reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+ omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+ }
+
+ reg = omap_ctrl_readl(control_pbias_offset);
+ if (cpu_is_omap3630()) {
+ /* Set MMC I/O to 52Mhz */
+ prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+ prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+ omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+ } else {
+ reg |= OMAP2_PBIASSPEEDCTRL0;
+ }
+ reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+ omap_ctrl_writel(reg, control_pbias_offset);
+ } else {
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+ omap_ctrl_writel(reg, control_pbias_offset);
+ }
+}
+
+static void hsmmc1_after_set_reg(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ u32 reg;
+
+ /* 100ms delay required for PBIAS configuration */
+ msleep(100);
+
+ if (power_on) {
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+ if ((1 << vdd) <= MMC_VDD_165_195)
+ reg &= ~OMAP2_PBIASLITEVMODE0;
+ else
+ reg |= OMAP2_PBIASLITEVMODE0;
+ omap_ctrl_writel(reg, control_pbias_offset);
+ } else {
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+ OMAP2_PBIASLITEVMODE0);
+ omap_ctrl_writel(reg, control_pbias_offset);
+ }
+}
+
+static void hsmmc23_before_set_reg(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ if (mmc->slots[0].remux)
+ mmc->slots[0].remux(dev, slot, power_on);
+
+ if (power_on) {
+ /* Only MMC2 supports a CLKIN */
+ if (mmc->slots[0].internal_clock) {
+ u32 reg;
+
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
+ }
+ }
+}
+
+static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
+
+void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+ struct omap2_hsmmc_info *c;
+ int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+ int i;
+
+ if (cpu_is_omap2430()) {
+ control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+ control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+ } else {
+ control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+ control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+ }
+
+ for (c = controllers; c->mmc; c++) {
+ struct hsmmc_controller *hc = hsmmc + c->mmc - 1;
+ struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+ if (!c->mmc || c->mmc > nr_hsmmc) {
+ pr_debug("MMC%d: no such controller\n", c->mmc);
+ continue;
+ }
+ if (mmc) {
+ pr_debug("MMC%d: already configured\n", c->mmc);
+ continue;
+ }
+
+ mmc = kzalloc(sizeof(struct omap_mmc_platform_data),
+ GFP_KERNEL);
+ if (!mmc) {
+ pr_err("Cannot allocate memory for mmc device!\n");
+ goto done;
+ }
+
+ if (c->name)
+ strncpy(hc->name, c->name, HSMMC_NAME_LEN);
+ else
+ snprintf(hc->name, ARRAY_SIZE(hc->name),
+ "mmc%islot%i", c->mmc, 1);
+ mmc->slots[0].name = hc->name;
+ mmc->nr_slots = 1;
+ mmc->slots[0].wires = c->wires;
+ mmc->slots[0].internal_clock = !c->ext_clock;
+ mmc->dma_mask = 0xffffffff;
+
+ mmc->get_context_loss_count = hsmmc_get_context_loss;
+
+ mmc->slots[0].switch_pin = c->gpio_cd;
+ mmc->slots[0].gpio_wp = c->gpio_wp;
+
+ mmc->slots[0].remux = c->remux;
+
+ if (c->cover_only)
+ mmc->slots[0].cover = 1;
+
+ if (c->nonremovable)
+ mmc->slots[0].nonremovable = 1;
+
+ if (c->power_saving)
+ mmc->slots[0].power_saving = 1;
+
+ if (c->no_off)
+ mmc->slots[0].no_off = 1;
+
+ if (c->vcc_aux_disable_is_sleep)
+ mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
+ */
+ mmc->slots[0].ocr_mask = c->ocr_mask;
+
+ switch (c->mmc) {
+ case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
+ mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
+ mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+
+ /* Omap3630 HSMMC1 supports only 4-bit */
+ if (cpu_is_omap3630() && c->wires > 4) {
+ c->wires = 4;
+ mmc->slots[0].wires = c->wires;
+ }
+ break;
+ case 2:
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
+ case 3:
+ /* off-chip level shifting, or none */
+ mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].after_set_reg = NULL;
+ break;
+ default:
+ pr_err("MMC%d configuration not supported!\n", c->mmc);
+ kfree(mmc);
+ continue;
+ }
+ hsmmc_data[c->mmc - 1] = mmc;
+ }
+
+ omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+ /* pass the device nodes back to board setup code */
+ for (c = controllers; c->mmc; c++) {
+ struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+ if (!c->mmc || c->mmc > nr_hsmmc)
+ continue;
+ c->dev = mmc->dev;
+ }
+
+done:
+ for (i = 0; i < nr_hsmmc; i++)
+ kfree(hsmmc_data[i]);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/hsmmc.h
similarity index 63%
rename from arch/arm/mach-omap2/mmc-twl4030.h
rename to arch/arm/mach-omap2/hsmmc.h
index a47e685..36f0ba8 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*/
-struct twl4030_hsmmc_info {
+struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
bool transceiver; /* MMC-2 option */
@@ -14,22 +14,24 @@
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
bool power_saving; /* Try to sleep or power off when possible */
+ bool no_off; /* power_saving and power is not to go off */
+ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
int ocr_mask; /* temporary HACK */
+ /* Remux (pad configuation) when powering on/off */
+ void (*remux)(struct device *dev, int slot, int power_on);
};
-#if defined(CONFIG_REGULATOR) && \
- (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void twl4030_mmc_init(struct twl4030_hsmmc_info *);
+void omap2_hsmmc_init(struct omap2_hsmmc_info *);
#else
-static inline void twl4030_mmc_init(struct twl4030_hsmmc_info *info)
+static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
{
}
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 789ca8c..7951ae1 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -25,9 +25,7 @@
#include "mux.h"
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
+void __init omap2_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap24xx()) {
const int omap24xx_pins[][2] = {
@@ -51,6 +49,4 @@
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
-
- return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 3d65c50..37b8a1a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -57,6 +57,8 @@
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ } else if (cpu_is_omap44xx()) {
+ val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS);
} else {
pr_err("Cannot detect omap type!\n");
goto out;
@@ -175,6 +177,8 @@
OMAP3_CHECK_FEATURE(status, SGX);
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
+ if (cpu_is_omap3630())
+ omap3_features |= OMAP3_HAS_192MHZ_CLK;
/*
* TODO: Get additional info (where applicable)
@@ -281,6 +285,7 @@
if ((hawkeye == 0xb852) && (rev == 0x0)) {
omap_revision = OMAP4430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP4430ES1;
pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
return;
}
@@ -358,6 +363,7 @@
OMAP3_SHOW_FEATURE(sgx);
OMAP3_SHOW_FEATURE(neon);
OMAP3_SHOW_FEATURE(isp);
+ OMAP3_SHOW_FEATURE(192mhz_clk);
printk(")\n");
}
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h
new file mode 100644
index 0000000..a705f94
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/am35xx.h
@@ -0,0 +1,26 @@
+/*:
+ * Address mappings and base address for AM35XX specific interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AM35XX_H
+#define __ASM_ARCH_AM35XX_H
+
+/*
+ * Base addresses
+ * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
+ */
+#define AM35XX_IPSS_EMAC_BASE 0x5C000000
+#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000
+#define AM35XX_IPSS_HECC_BASE 0x5C050000
+#define AM35XX_IPSS_VPFE_BASE 0x5C060000
+
+#endif /* __ASM_ARCH_AM35XX_H */
diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-sdp.h
new file mode 100644
index 0000000..465169c
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-sdp.h
@@ -0,0 +1,21 @@
+/*
+ * board-sdp.h
+ *
+ * Information structures for SDP-specific board config data
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct flash_partitions {
+ struct mtd_partition *parts;
+ int nr_parts;
+};
+
+extern void sdp_flash_init(struct flash_partitions []);
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255d..4a63a2e 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,32 +11,107 @@
*
*/
- .macro addruart,rx
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
+#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+
+ .pushsection .data
+omap_uart_phys: .word 0
+omap_uart_virt: .word 0
+omap_uart_lsr: .word 0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
+ .macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+10: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base address
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP2
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00004000 @ UART 3
-#endif
+ orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4
+ ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00fb0000 @ UART 3
- add \rx, \rx, #0x00006000
-#endif
-#endif
+ /* Select the UART to use based on the UART1 scratchpad value */
+ cmp \rx, #0 @ no port configured?
+ beq 21f @ if none, try to use UART1
+ cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
+ beq 21f @ configure OMAP2/3/4UART1
+ cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
+ beq 22f @ configure OMAP2/3/4UART2
+ cmp \rx, #OMAP2UART3 @ only on 24xx
+ beq 23f @ configure OMAP2UART3
+ cmp \rx, #OMAP3UART3 @ only on 34xx
+ beq 33f @ configure OMAP3UART3
+ cmp \rx, #OMAP4UART3 @ only on 44xx
+ beq 43f @ configure OMAP4UART3
+ cmp \rx, #OMAP3UART4 @ only on 36xx
+ beq 34f @ configure OMAP3UART4
+ cmp \rx, #OMAP4UART4 @ only on 44xx
+ beq 44f @ configure OMAP4UART4
+ cmp \rx, #ZOOM_UART @ only on zoom2/3
+ beq 95f @ configure ZOOM_UART
+
+ /* Configure the UART offset from the phys/virt base */
+21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
+ b 98f
+22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
+ b 98f
+23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
+ b 98f
+33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
+ b 98f
+34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
+ b 98f
+43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
+ b 98f
+44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
+ b 98f
+95: mov \rx, #ZOOM_UART_BASE
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ mov \rx, #ZOOM_UART_VIRT
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
+ ldr \tmp, =omap_uart_lsr
+ str \rx, [\tmp, #0]
+ b 10b
+
+ /* Store both phys and virt address for the uart */
+98: add \rx, \rx, #0x48000000 @ phys base
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ sub \rx, \rx, #0x48000000 @ phys base
+ add \rx, \rx, #0xfa000000 @ virt base
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
+ ldr \tmp, =omap_uart_lsr
+ str \rx, [\tmp, #0]
+
+ b 10b
+99:
.endm
.macro senduart,rd,rx
@@ -44,15 +119,12 @@
.endm
.macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
- beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
+1001: ldr \rd, =omap_uart_lsr
+ ldr \rd, [\rd, #0]
+ ldrb \rd, [\rx, \rd]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
-1002:
.endm
.macro waituart,rd,rx
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index c7f1720..ff25c7e 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -17,46 +17,134 @@
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
#include <plat/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
-#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
+
+#include <plat/multi.h>
+
+#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-#ifndef CONFIG_ARCH_OMAP4
+/*
+ * Unoptimized irq functions for multi-omap2, 3 and 4
+ */
+
+#ifdef MULTI_OMAP2
+ .pushsection .data
+omap_irq_base: .word 0
+ .popsection
+
+ /* Configure the interrupt base on the first interrupt */
+ .macro get_irqnr_preamble, base, tmp
+9:
+ ldr \base, =omap_irq_base @ irq base address
+ ldr \base, [\base, #0] @ irq base value
+ cmp \base, #0 @ already configured?
+ bne 9997f @ nothing to do
+
+ mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
+ and \tmp, \tmp, #0x000f0000 @ only check architecture
+ cmp \tmp, #0x00060000 @ is v6?
+ beq 2400f @ found v6 so it's omap24xx
+ mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
+ and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9
+ cmp \tmp, #0x00000080 @ cortex A-8?
+ beq 3400f @ found A-8 so it's omap34xx
+ cmp \tmp, #0x00000090 @ cortex A-9?
+ beq 4400f @ found A-9 so it's omap44xx
+2400: ldr \base, =OMAP2_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+3400: ldr \base, =OMAP3_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+4400: ldr \base, =OMAP4_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+9997:
+ .endm
+
+ /* Check the pending interrupts. Note that base already set */
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP2_VA_IC_BASE
+ tst \base, #0x100 @ gic address?
+ bne 4401f @ found gic
+
+ /* Handle omap2 and omap3 */
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
cmp \irqnr, #0x0
- bne 2222f
+ bne 9998f
ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
cmp \irqnr, #0x0
- bne 2222f
+ bne 9998f
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
-2222:
+9998:
+ ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+ and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+ b 9999f
+
+ /* Handle omap4 */
+4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
+ ldr \tmp, =1021
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+9999:
+ .endm
+
+
+#else /* MULTI_OMAP2 */
+
+
+/*
+ * Optimized irq functions for omap2, 3 and 4
+ */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ .macro get_irqnr_preamble, base, tmp
+#ifdef CONFIG_ARCH_OMAP2
+ ldr \base, =OMAP2_IRQ_BASE
+#else
+ ldr \base, =OMAP3_IRQ_BASE
+#endif
+ .endm
+
+ /* Check the pending interrupts. Note that base already set */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+ cmp \irqnr, #0x0
+ bne 9999f
+ ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+ cmp \irqnr, #0x0
+ bne 9999f
+ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+ cmp \irqnr, #0x0
+9999:
ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
-#else
-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#endif
+
+
+#ifdef CONFIG_ARCH_OMAP4
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =OMAP4_IRQ_BASE
+ .endm
/*
* The interrupt numbering scheme is defined in the
@@ -78,7 +166,6 @@
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
@@ -119,6 +206,7 @@
cmp \tmp, #0
.endm
#endif
+#endif /* MULTI_OMAP2 */
.macro irq_prio_table
.endm
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5a79964..402e8f0 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,7 +35,9 @@
#include <plat/serial.h>
#include <plat/vram.h>
-#include "clock.h"
+#include "clock2xxx.h"
+#include "clock3xxx.h"
+#include "clock44xx.h"
#include <plat/omap-pm.h>
#include <plat/powerdomain.h>
@@ -44,16 +46,13 @@
#include <plat/clockdomain.h>
#include "clockdomains.h"
#include <plat/omap_hwmod.h>
-#include "omap_hwmod_2420.h"
-#include "omap_hwmod_2430.h"
-#include "omap_hwmod_34xx.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
@@ -123,7 +122,7 @@
#endif
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
@@ -138,12 +137,6 @@
.type = MT_DEVICE
},
{
- .virtual = L4_WK_34XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
- .length = L4_WK_34XX_SIZE,
- .type = MT_DEVICE
- },
- {
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
@@ -190,12 +183,6 @@
.type = MT_DEVICE,
},
{
- .virtual = L4_WK_44XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
- .length = L4_WK_44XX_SIZE,
- .type = MT_DEVICE,
- },
- {
.virtual = OMAP44XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
.length = OMAP44XX_GPMC_SIZE,
@@ -234,25 +221,8 @@
};
#endif
-void __init omap2_map_common_io(void)
+static void __init _omap2_map_common_io(void)
{
-#if defined(CONFIG_ARCH_OMAP2420)
- iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
- iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
- iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
- iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
- iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
- iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
-#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
@@ -266,6 +236,40 @@
omap_vram_reserve_sdram();
}
+#ifdef CONFIG_ARCH_OMAP2420
+void __init omap242x_map_common_io()
+{
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+ _omap2_map_common_io();
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+void __init omap243x_map_common_io()
+{
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+ _omap2_map_common_io();
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void __init omap34xx_map_common_io()
+{
+ iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+ _omap2_map_common_io();
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+void __init omap44xx_map_common_io()
+{
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+ _omap2_map_common_io();
+}
+#endif
+
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
@@ -303,24 +307,31 @@
void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
- struct omap_hwmod **hwmods = NULL;
+ pwrdm_init(powerdomains_omap);
+ clkdm_init(clockdomains_omap, clkdm_autodeps);
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
+ if (cpu_is_omap242x())
+ omap2420_hwmod_init();
+ else if (cpu_is_omap243x())
+ omap2430_hwmod_init();
+ else if (cpu_is_omap34xx())
+ omap3xxx_hwmod_init();
+ omap2_mux_init();
+ /* The OPP tables have to be registered before a clk init */
+ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
+#endif
if (cpu_is_omap2420())
- hwmods = omap2420_hwmods;
+ omap2420_clk_init();
else if (cpu_is_omap2430())
- hwmods = omap2430_hwmods;
+ omap2430_clk_init();
else if (cpu_is_omap34xx())
- hwmods = omap34xx_hwmods;
+ omap3xxx_clk_init();
+ else if (cpu_is_omap44xx())
+ omap4xxx_clk_init();
+ else
+ pr_err("Could not init clock framework - unknown CPU\n");
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
- /* The OPP tables have to be registered before a clk init */
- omap_hwmod_init(hwmods);
- omap2_mux_init();
- omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
- pwrdm_init(powerdomains_omap);
- clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
-#endif
- omap2_clk_init();
omap_serial_early_init();
#ifndef CONFIG_ARCH_OMAP4
omap_hwmod_late_init();
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 281ab63..52a981c 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -40,6 +40,9 @@
#define AUTOIDLE (1 << 0)
#define SOFTRESET (1 << 1)
#define SMARTIDLE (2 << 3)
+#define OMAP4_SOFTRESET (1 << 0)
+#define OMAP4_NOIDLE (1 << 2)
+#define OMAP4_SMARTIDLE (2 << 2)
/* SYSSTATUS: register bit definition */
#define RESETDONE (1 << 0)
@@ -93,29 +96,47 @@
mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
if (IS_ERR(mbox_ick_handle)) {
- printk(KERN_ERR "Could not get mailboxes_ick: %d\n",
+ printk(KERN_ERR "Could not get mailboxes_ick: %ld\n",
PTR_ERR(mbox_ick_handle));
return PTR_ERR(mbox_ick_handle);
}
clk_enable(mbox_ick_handle);
- mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
- timeout = jiffies + msecs_to_jiffies(20);
- do {
- l = mbox_read_reg(MAILBOX_SYSSTATUS);
- if (l & RESETDONE)
- break;
- } while (!time_after(jiffies, timeout));
+ if (cpu_is_omap44xx()) {
+ mbox_write_reg(OMAP4_SOFTRESET, MAILBOX_SYSCONFIG);
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = mbox_read_reg(MAILBOX_SYSCONFIG);
+ if (!(l & OMAP4_SOFTRESET))
+ break;
+ } while (!time_after(jiffies, timeout));
- if (!(l & RESETDONE)) {
- pr_err("Can't take mmu out of reset\n");
- return -ENODEV;
+ if (l & OMAP4_SOFTRESET) {
+ pr_err("Can't take mailbox out of reset\n");
+ return -ENODEV;
+ }
+ } else {
+ mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = mbox_read_reg(MAILBOX_SYSSTATUS);
+ if (l & RESETDONE)
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(l & RESETDONE)) {
+ pr_err("Can't take mailbox out of reset\n");
+ return -ENODEV;
+ }
}
l = mbox_read_reg(MAILBOX_REVISION);
pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
- l = SMARTIDLE | AUTOIDLE;
+ if (cpu_is_omap44xx())
+ l = OMAP4_SMARTIDLE;
+ else
+ l = SMARTIDLE | AUTOIDLE;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
omap2_mbox_enable_irq(mbox, IRQ_RX);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index baa4517..be8fce3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -65,9 +65,11 @@
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
+#define OMAP2420_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
#else
#define omap2420_mcbsp_pdata NULL
#define OMAP2420_MCBSP_PDATA_SZ 0
+#define OMAP2420_MCBSP_REG_NUM 0
#endif
#ifdef CONFIG_ARCH_OMAP2430
@@ -114,12 +116,14 @@
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
+#define OMAP2430_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
#else
#define omap2430_mcbsp_pdata NULL
#define OMAP2430_MCBSP_PDATA_SZ 0
+#define OMAP2430_MCBSP_REG_NUM 0
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
.phys_base = OMAP34XX_MCBSP1_BASE,
@@ -132,6 +136,7 @@
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
+ .phys_base_st = OMAP34XX_MCBSP2_ST_BASE,
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
@@ -141,6 +146,7 @@
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
+ .phys_base_st = OMAP34XX_MCBSP3_ST_BASE,
.dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
@@ -168,9 +174,11 @@
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#define OMAP34XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
#else
#define omap34xx_mcbsp_pdata NULL
#define OMAP34XX_MCBSP_PDATA_SZ 0
+#define OMAP34XX_MCBSP_REG_NUM 0
#endif
static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
@@ -208,17 +216,23 @@
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
+#define OMAP44XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
static int __init omap2_mcbsp_init(void)
{
- if (cpu_is_omap2420())
+ if (cpu_is_omap2420()) {
omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
- if (cpu_is_omap2430())
+ omap_mcbsp_cache_size = OMAP2420_MCBSP_REG_NUM * sizeof(u16);
+ } else if (cpu_is_omap2430()) {
omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
- if (cpu_is_omap34xx())
+ omap_mcbsp_cache_size = OMAP2430_MCBSP_REG_NUM * sizeof(u32);
+ } else if (cpu_is_omap34xx()) {
omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
- if (cpu_is_omap44xx())
+ omap_mcbsp_cache_size = OMAP34XX_MCBSP_REG_NUM * sizeof(u32);
+ } else if (cpu_is_omap44xx()) {
omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
+ omap_mcbsp_cache_size = OMAP44XX_MCBSP_REG_NUM * sizeof(u32);
+ }
mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
GFP_KERNEL);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
deleted file mode 100644
index 8afe9dd..0000000
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/mmc-twl4030.c
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/hardware.h>
-#include <plat/control.h>
-#include <plat/mmc.h>
-#include <plat/board.h>
-
-#include "mmc-twl4030.h"
-
-
-#if defined(CONFIG_REGULATOR) && \
- (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-
-static u16 control_pbias_offset;
-static u16 control_devconf1_offset;
-
-#define HSMMC_NAME_LEN 9
-
-static struct twl_mmc_controller {
- struct omap_mmc_platform_data *mmc;
- /* Vcc == configured supply
- * Vcc_alt == optional
- * - MMC1, supply for DAT4..DAT7
- * - MMC2/MMC2, external level shifter voltage supply, for
- * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
- */
- struct regulator *vcc;
- struct regulator *vcc_aux;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC];
-
-static int twl_mmc_card_detect(int irq)
-{
- unsigned i;
-
- for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
- struct omap_mmc_platform_data *mmc;
-
- mmc = hsmmc[i].mmc;
- if (!mmc)
- continue;
- if (irq != mmc->slots[0].card_detect_irq)
- continue;
-
- /* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
- }
- return -ENOSYS;
-}
-
-static int twl_mmc_get_ro(struct device *dev, int slot)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
-
- /* NOTE: assumes write protect signal is active-high */
- return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
-}
-
-static int twl_mmc_get_cover_state(struct device *dev, int slot)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
-
- /* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
-}
-
-/*
- * MMC Slot Initialization.
- */
-static int twl_mmc_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
- int ret = 0;
- int i;
-
- /* MMC/SD/SDIO doesn't require a card detect switch */
- if (gpio_is_valid(mmc->slots[0].switch_pin)) {
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
- }
-
- /* require at least main regulator */
- for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
- if (hsmmc[i].name == mmc->slots[0].name) {
- struct regulator *reg;
-
- hsmmc[i].mmc = mmc;
-
- reg = regulator_get(dev, "vmmc");
- if (IS_ERR(reg)) {
- dev_dbg(dev, "vmmc regulator missing\n");
- /* HACK: until fixed.c regulator is usable,
- * we don't require a main regulator
- * for MMC2 or MMC3
- */
- if (i != 0)
- break;
- ret = PTR_ERR(reg);
- hsmmc[i].vcc = NULL;
- goto err;
- }
- hsmmc[i].vcc = reg;
- mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
-
- /* allow an aux regulator */
- reg = regulator_get(dev, "vmmc_aux");
- hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
-
- /* UGLY HACK: workaround regulator framework bugs.
- * When the bootloader leaves a supply active, it's
- * initialized with zero usecount ... and we can't
- * disable it without first enabling it. Until the
- * framework is fixed, we need a workaround like this
- * (which is safe for MMC, but not in general).
- */
- if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
- regulator_enable(hsmmc[i].vcc);
- regulator_disable(hsmmc[i].vcc);
- }
- if (hsmmc[i].vcc_aux) {
- if (regulator_is_enabled(reg) > 0) {
- regulator_enable(reg);
- regulator_disable(reg);
- }
- }
-
- break;
- }
- }
-
- return 0;
-
-err:
- gpio_free(mmc->slots[0].switch_pin);
-done:
- mmc->slots[0].card_detect_irq = 0;
- mmc->slots[0].card_detect = NULL;
-
- dev_err(dev, "err %d configuring card detect\n", ret);
- return ret;
-}
-
-static void twl_mmc_cleanup(struct device *dev)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
- int i;
-
- gpio_free(mmc->slots[0].switch_pin);
- for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
- regulator_put(hsmmc[i].vcc);
- regulator_put(hsmmc[i].vcc_aux);
- }
-}
-
-#ifdef CONFIG_PM
-
-static int twl_mmc_suspend(struct device *dev, int slot)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
-
- disable_irq(mmc->slots[0].card_detect_irq);
- return 0;
-}
-
-static int twl_mmc_resume(struct device *dev, int slot)
-{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
-
- enable_irq(mmc->slots[0].card_detect_irq);
- return 0;
-}
-
-#else
-#define twl_mmc_suspend NULL
-#define twl_mmc_resume NULL
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int twl4030_mmc_get_context_loss(struct device *dev)
-{
- /* FIXME: PM DPS not implemented yet */
- return 0;
-}
-
-#else
-#define twl4030_mmc_get_context_loss NULL
-#endif
-
-static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- u32 reg, prog_io;
- int ret = 0;
- struct twl_mmc_controller *c = &hsmmc[0];
- struct omap_mmc_platform_data *mmc = dev->platform_data;
-
- /*
- * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card with Vcc regulator (from twl4030 or whatever). OMAP has both
- * 1.8V and 3.0V modes, controlled by the PBIAS register.
- *
- * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
- * is most naturally TWL VSIM; those pins also use PBIAS.
- *
- * FIXME handle VMMC1A as needed ...
- */
- if (power_on) {
- if (cpu_is_omap2430()) {
- reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
- if ((1 << vdd) >= MMC_VDD_30_31)
- reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
- else
- reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
- omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
- }
-
- if (mmc->slots[0].internal_clock) {
- reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- reg |= OMAP2_MMCSDIO1ADPCLKISEL;
- omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
- }
-
- reg = omap_ctrl_readl(control_pbias_offset);
- if (cpu_is_omap3630()) {
- /* Set MMC I/O to 52Mhz */
- prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
- prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
- omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
- } else {
- reg |= OMAP2_PBIASSPEEDCTRL0;
- }
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
-
- ret = mmc_regulator_set_ocr(c->vcc, vdd);
-
- /* 100ms delay required for PBIAS configuration */
- msleep(100);
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
- if ((1 << vdd) <= MMC_VDD_165_195)
- reg &= ~OMAP2_PBIASLITEVMODE0;
- else
- reg |= OMAP2_PBIASLITEVMODE0;
- omap_ctrl_writel(reg, control_pbias_offset);
- } else {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
-
- ret = mmc_regulator_set_ocr(c->vcc, 0);
-
- /* 100ms delay required for PBIAS configuration */
- msleep(100);
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
- OMAP2_PBIASLITEVMODE0);
- omap_ctrl_writel(reg, control_pbias_offset);
- }
-
- return ret;
-}
-
-static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
-{
- int ret = 0;
- struct twl_mmc_controller *c = NULL;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
- int i;
-
- for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
- if (mmc == hsmmc[i].mmc) {
- c = &hsmmc[i];
- break;
- }
- }
-
- if (c == NULL)
- return -ENODEV;
-
- /* If we don't see a Vcc regulator, assume it's a fixed
- * voltage always-on regulator.
- */
- if (!c->vcc)
- return 0;
-
- /*
- * Assume Vcc regulator is used only to power the card ... OMAP
- * VDDS is used to power the pins, optionally with a transceiver to
- * support cards using voltages other than VDDS (1.8V nominal). When a
- * transceiver is used, DAT3..7 are muxed as transceiver control pins.
- *
- * In some cases this regulator won't support enable/disable;
- * e.g. it's a fixed rail for a WLAN chip.
- *
- * In other cases vcc_aux switches interface power. Example, for
- * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
- * chips/cards need an interface voltage rail too.
- */
- if (power_on) {
- /* only MMC2 supports a CLKIN */
- if (mmc->slots[0].internal_clock) {
- u32 reg;
-
- reg = omap_ctrl_readl(control_devconf1_offset);
- reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
- ret = mmc_regulator_set_ocr(c->vcc, vdd);
- /* enable interface voltage rail, if needed */
- if (ret == 0 && c->vcc_aux) {
- ret = regulator_enable(c->vcc_aux);
- if (ret < 0)
- ret = mmc_regulator_set_ocr(c->vcc, 0);
- }
- } else {
- if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
- ret = regulator_disable(c->vcc_aux);
- if (ret == 0)
- ret = mmc_regulator_set_ocr(c->vcc, 0);
- }
-
- return ret;
-}
-
-static int twl_mmc1_set_sleep(struct device *dev, int slot, int sleep, int vdd,
- int cardsleep)
-{
- struct twl_mmc_controller *c = &hsmmc[0];
- int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
-
- return regulator_set_mode(c->vcc, mode);
-}
-
-static int twl_mmc23_set_sleep(struct device *dev, int slot, int sleep, int vdd,
- int cardsleep)
-{
- struct twl_mmc_controller *c = NULL;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
- int i, err, mode;
-
- for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
- if (mmc == hsmmc[i].mmc) {
- c = &hsmmc[i];
- break;
- }
- }
-
- if (c == NULL)
- return -ENODEV;
-
- /*
- * If we don't see a Vcc regulator, assume it's a fixed
- * voltage always-on regulator.
- */
- if (!c->vcc)
- return 0;
-
- mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
-
- if (!c->vcc_aux)
- return regulator_set_mode(c->vcc, mode);
-
- if (cardsleep) {
- /* VCC can be turned off if card is asleep */
- struct regulator *vcc_aux = c->vcc_aux;
-
- c->vcc_aux = NULL;
- if (sleep)
- err = twl_mmc23_set_power(dev, slot, 0, 0);
- else
- err = twl_mmc23_set_power(dev, slot, 1, vdd);
- c->vcc_aux = vcc_aux;
- } else
- err = regulator_set_mode(c->vcc, mode);
- if (err)
- return err;
- return regulator_set_mode(c->vcc_aux, mode);
-}
-
-static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
-
-void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
-{
- struct twl4030_hsmmc_info *c;
- int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
- int i;
-
- if (cpu_is_omap2430()) {
- control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
- control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
- nr_hsmmc = 2;
- } else {
- control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
- control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
- }
-
- for (c = controllers; c->mmc; c++) {
- struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
- struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
-
- if (!c->mmc || c->mmc > nr_hsmmc) {
- pr_debug("MMC%d: no such controller\n", c->mmc);
- continue;
- }
- if (mmc) {
- pr_debug("MMC%d: already configured\n", c->mmc);
- continue;
- }
-
- mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
- if (!mmc) {
- pr_err("Cannot allocate memory for mmc device!\n");
- goto done;
- }
-
- if (c->name)
- strncpy(twl->name, c->name, HSMMC_NAME_LEN);
- else
- snprintf(twl->name, ARRAY_SIZE(twl->name),
- "mmc%islot%i", c->mmc, 1);
- mmc->slots[0].name = twl->name;
- mmc->nr_slots = 1;
- mmc->slots[0].wires = c->wires;
- mmc->slots[0].internal_clock = !c->ext_clock;
- mmc->dma_mask = 0xffffffff;
- mmc->init = twl_mmc_late_init;
-
- /* note: twl4030 card detect GPIOs can disable VMMCx ... */
- if (gpio_is_valid(c->gpio_cd)) {
- mmc->cleanup = twl_mmc_cleanup;
- mmc->suspend = twl_mmc_suspend;
- mmc->resume = twl_mmc_resume;
-
- mmc->slots[0].switch_pin = c->gpio_cd;
- mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
- if (c->cover_only)
- mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
- else
- mmc->slots[0].card_detect = twl_mmc_card_detect;
- } else
- mmc->slots[0].switch_pin = -EINVAL;
-
- mmc->get_context_loss_count =
- twl4030_mmc_get_context_loss;
-
- /* write protect normally uses an OMAP gpio */
- if (gpio_is_valid(c->gpio_wp)) {
- gpio_request(c->gpio_wp, "mmc_wp");
- gpio_direction_input(c->gpio_wp);
-
- mmc->slots[0].gpio_wp = c->gpio_wp;
- mmc->slots[0].get_ro = twl_mmc_get_ro;
- } else
- mmc->slots[0].gpio_wp = -EINVAL;
-
- if (c->nonremovable)
- mmc->slots[0].nonremovable = 1;
-
- if (c->power_saving)
- mmc->slots[0].power_saving = 1;
-
- /* NOTE: MMC slots should have a Vcc regulator set up.
- * This may be from a TWL4030-family chip, another
- * controllable regulator, or a fixed supply.
- *
- * temporary HACK: ocr_mask instead of fixed supply
- */
- mmc->slots[0].ocr_mask = c->ocr_mask;
-
- switch (c->mmc) {
- case 1:
- /* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
-
- /* Omap3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() && c->wires > 4) {
- c->wires = 4;
- mmc->slots[0].wires = c->wires;
- }
- break;
- case 2:
- if (c->ext_clock)
- c->transceiver = 1;
- if (c->transceiver && c->wires > 4)
- c->wires = 4;
- /* FALLTHROUGH */
- case 3:
- /* off-chip level shifting, or none */
- mmc->slots[0].set_power = twl_mmc23_set_power;
- mmc->slots[0].set_sleep = twl_mmc23_set_sleep;
- break;
- default:
- pr_err("MMC%d configuration not supported!\n", c->mmc);
- kfree(mmc);
- continue;
- }
- hsmmc_data[c->mmc - 1] = mmc;
- }
-
- omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
-
- /* pass the device nodes back to board setup code */
- for (c = controllers; c->mmc; c++) {
- struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
-
- if (!c->mmc || c->mmc > nr_hsmmc)
- continue;
- c->dev = mmc->dev;
- }
-
-done:
- for (i = 0; i < nr_hsmmc; i++)
- kfree(hsmmc_data[i]);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 5fef73f..b4ca84e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -75,7 +75,7 @@
}
}
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
@@ -369,7 +369,7 @@
/*----------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
@@ -983,6 +983,38 @@
}
}
+#ifdef CONFIG_OMAP_MUX
+
+static void omap_mux_init_package(struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_ball *package_balls)
+{
+ if (package_subset)
+ omap_mux_package_fixup(package_subset, superset);
+ if (package_balls)
+ omap_mux_package_init_balls(package_balls, superset);
+}
+
+static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+{
+ omap_mux_set_cmdline_signals();
+ omap_mux_write_array(board_mux);
+}
+
+#else
+
+static void omap_mux_init_package(struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_ball *package_balls)
+{
+}
+
+static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+{
+}
+
+#endif
+
int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
struct omap_mux *superset,
struct omap_mux *package_subset,
@@ -999,22 +1031,12 @@
return -ENODEV;
}
-#ifdef CONFIG_OMAP_MUX
- if (package_subset)
- omap_mux_package_fixup(package_subset, superset);
- if (package_balls)
- omap_mux_package_init_balls(package_balls, superset);
-#endif
-
+ omap_mux_init_package(superset, package_subset, package_balls);
omap_mux_init_list(superset);
-
-#ifdef CONFIG_OMAP_MUX
- omap_mux_set_cmdline_signals();
- omap_mux_write_array(board_mux);
-#endif
+ omap_mux_init_signals(board_mux);
return 0;
}
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index f8c2e7a..480abc5 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -102,7 +102,7 @@
u16 value;
};
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
/**
* omap_mux_init_gpio - initialize a signal based on the GPIO number
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 478ae58..c664947 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -84,17 +84,16 @@
*/
static int _update_sysc_cache(struct omap_hwmod *oh)
{
- if (!oh->sysconfig) {
- WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
- "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+ if (!oh->class->sysc) {
+ WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
return -EINVAL;
}
/* XXX ensure module interface clock is up */
- oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+ oh->_sysc_cache = omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
- if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+ if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
@@ -105,14 +104,13 @@
* @v: OCP_SYSCONFIG value to write
* @oh: struct omap_hwmod *
*
- * Write @v into the module OCP_SYSCONFIG register, if it has one. No
- * return value.
+ * Write @v into the module class' OCP_SYSCONFIG register, if it has
+ * one. No return value.
*/
static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
{
- if (!oh->sysconfig) {
- WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
- "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+ if (!oh->class->sysc) {
+ WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
return;
}
@@ -120,7 +118,7 @@
if (oh->_sysc_cache != v) {
oh->_sysc_cache = v;
- omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
+ omap_hwmod_writel(v, oh, oh->class->sysc->sysc_offs);
}
}
@@ -137,12 +135,23 @@
static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
u32 *v)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
+ u32 mstandby_mask;
+ u8 mstandby_shift;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
return -EINVAL;
- *v &= ~SYSC_MIDLEMODE_MASK;
- *v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
+ mstandby_mask = (0x3 << mstandby_shift);
+
+ *v &= ~mstandby_mask;
+ *v |= __ffs(standbymode) << mstandby_shift;
return 0;
}
@@ -159,12 +168,23 @@
*/
static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
+ u32 sidle_mask;
+ u8 sidle_shift;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
return -EINVAL;
- *v &= ~SYSC_SIDLEMODE_MASK;
- *v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
+ sidle_mask = (0x3 << sidle_shift);
+
+ *v &= ~sidle_mask;
+ *v |= __ffs(idlemode) << sidle_shift;
return 0;
}
@@ -182,12 +202,23 @@
*/
static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+ u32 clkact_mask;
+ u8 clkact_shift;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
return -EINVAL;
- *v &= ~SYSC_CLOCKACTIVITY_MASK;
- *v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
+ clkact_mask = (0x3 << clkact_shift);
+
+ *v &= ~clkact_mask;
+ *v |= clockact << clkact_shift;
return 0;
}
@@ -202,11 +233,20 @@
*/
static int _set_softreset(struct omap_hwmod *oh, u32 *v)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
+ u32 softrst_mask;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
return -EINVAL;
- *v |= SYSC_SOFTRESET_MASK;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+ *v |= softrst_mask;
return 0;
}
@@ -227,12 +267,23 @@
static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
u32 *v)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE))
+ u32 autoidle_mask;
+ u8 autoidle_shift;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
return -EINVAL;
- *v &= ~SYSC_AUTOIDLE_MASK;
- *v |= autoidle << SYSC_AUTOIDLE_SHIFT;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
+ autoidle_mask = (0x3 << autoidle_shift);
+
+ *v &= ~autoidle_mask;
+ *v |= autoidle << autoidle_shift;
return 0;
}
@@ -246,14 +297,21 @@
*/
static int _enable_wakeup(struct omap_hwmod *oh)
{
- u32 v;
+ u32 v, wakeup_mask;
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
+
v = oh->_sysc_cache;
- v |= SYSC_ENAWAKEUP_MASK;
+ v |= wakeup_mask;
_write_sysconfig(v, oh);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
@@ -272,14 +330,21 @@
*/
static int _disable_wakeup(struct omap_hwmod *oh)
{
- u32 v;
+ u32 v, wakeup_mask;
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
+
v = oh->_sysc_cache;
- v &= ~SYSC_ENAWAKEUP_MASK;
+ v &= ~wakeup_mask;
_write_sysconfig(v, oh);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
@@ -299,15 +364,14 @@
* be accessed by the IVA, there should be a sleepdep between the IVA
* initiator and the module). Only applies to modules in smart-idle
* mode. Returns -EINVAL upon error or passes along
- * pwrdm_add_sleepdep() value upon success.
+ * clkdm_add_sleepdep() value upon success.
*/
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
return -EINVAL;
- return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
- init_oh->_clk->clkdm->pwrdm.ptr);
+ return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
}
/**
@@ -320,15 +384,14 @@
* be accessed by the IVA, there should be no sleepdep between the IVA
* initiator and the module). Only applies to modules in smart-idle
* mode. Returns -EINVAL upon error or passes along
- * pwrdm_add_sleepdep() value upon success.
+ * clkdm_del_sleepdep() value upon success.
*/
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
return -EINVAL;
- return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
- init_oh->_clk->clkdm->pwrdm.ptr);
+ return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
}
/**
@@ -344,18 +407,18 @@
struct clk *c;
int ret = 0;
- if (!oh->clkdev_con_id)
+ if (!oh->main_clk)
return 0;
- c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
- WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
- oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
+ c = omap_clk_get_by_name(oh->main_clk);
+ WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s\n",
+ oh->name, oh->main_clk);
if (IS_ERR(c))
ret = -EINVAL;
oh->_clk = c;
WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
- oh->clkdev_con_id, c->name);
+ oh->main_clk, c->name);
return ret;
}
@@ -378,13 +441,12 @@
return 0;
for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
- if (!os->clkdev_con_id)
+ if (!os->clk)
continue;
- c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
+ c = omap_clk_get_by_name(os->clk);
WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
- "interface_clk %s.%s\n", oh->name,
- os->clkdev_dev_id, os->clkdev_con_id);
+ "interface_clk %s\n", oh->name, os->clk);
if (IS_ERR(c))
ret = -EINVAL;
os->_clk = c;
@@ -408,10 +470,9 @@
int ret = 0;
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
- c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
+ c = omap_clk_get_by_name(oc->clk);
WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
- "%s.%s\n", oh->name, oc->clkdev_dev_id,
- oc->clkdev_con_id);
+ "%s\n", oh->name, oc->clk);
if (IS_ERR(c))
ret = -EINVAL;
oc->_clk = c;
@@ -568,27 +629,28 @@
*/
static void _sysc_enable(struct omap_hwmod *oh)
{
- u8 idlemode;
+ u8 idlemode, sf;
u32 v;
- if (!oh->sysconfig)
+ if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
+ sf = oh->class->sysc->sysc_flags;
- if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+ if (sf & SYSC_HAS_SIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
- if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+ if (sf & SYSC_HAS_MIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_master_standbymode(oh, idlemode, &v);
}
- if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) {
+ if (sf & SYSC_HAS_AUTOIDLE) {
idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
0 : 1;
_set_module_autoidle(oh, idlemode, &v);
@@ -601,9 +663,9 @@
* calling into this code. But this must wait until the
* clock structures are tagged with omap_hwmod entries
*/
- if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
- oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
- _set_clockactivity(oh, oh->sysconfig->clockact, &v);
+ if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
+ (sf & SYSC_HAS_CLOCKACTIVITY))
+ _set_clockactivity(oh, oh->class->sysc->clockact, &v);
_write_sysconfig(v, oh);
}
@@ -619,21 +681,22 @@
*/
static void _sysc_idle(struct omap_hwmod *oh)
{
- u8 idlemode;
+ u8 idlemode, sf;
u32 v;
- if (!oh->sysconfig)
+ if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
+ sf = oh->class->sysc->sysc_flags;
- if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+ if (sf & SYSC_HAS_SIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
- if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+ if (sf & SYSC_HAS_MIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
_set_master_standbymode(oh, idlemode, &v);
@@ -652,19 +715,21 @@
static void _sysc_shutdown(struct omap_hwmod *oh)
{
u32 v;
+ u8 sf;
- if (!oh->sysconfig)
+ if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
+ sf = oh->class->sysc->sysc_flags;
- if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
+ if (sf & SYSC_HAS_SIDLEMODE)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
- if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
+ if (sf & SYSC_HAS_MIDLEMODE)
_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
- if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)
+ if (sf & SYSC_HAS_AUTOIDLE)
_set_module_autoidle(oh, 1, &v);
_write_sysconfig(v, oh);
@@ -781,9 +846,9 @@
u32 r, v;
int c = 0;
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
- (oh->sysconfig->sysc_flags & SYSS_MISSING))
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
+ (oh->class->sysc->sysc_flags & SYSS_MISSING))
return -EINVAL;
/* clocks must be on for this operation */
@@ -801,7 +866,7 @@
return r;
_write_sysconfig(v, oh);
- omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+ omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
SYSS_RESETDONE_MASK),
MAX_MODULE_RESET_WAIT, c);
@@ -847,7 +912,7 @@
_add_initiator_dep(oh, mpu_oh);
_enable_clocks(oh);
- if (oh->sysconfig) {
+ if (oh->class->sysc) {
if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
_update_sysc_cache(oh);
_sysc_enable(oh);
@@ -878,7 +943,7 @@
pr_debug("omap_hwmod: %s: idling\n", oh->name);
- if (oh->sysconfig)
+ if (oh->class->sysc)
_sysc_idle(oh);
_del_initiator_dep(oh, mpu_oh);
_disable_clocks(oh);
@@ -908,7 +973,7 @@
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
- if (oh->sysconfig)
+ if (oh->class->sysc)
_sysc_shutdown(oh);
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? DMA, tesla, d2d */
@@ -968,7 +1033,7 @@
* _enable() function should be split to avoid the
* rewrite of the OCP_SYSCONFIG register.
*/
- if (oh->sysconfig) {
+ if (oh->class->sysc) {
_update_sysc_cache(oh);
_sysc_enable(oh);
}
@@ -994,13 +1059,33 @@
__raw_writel(v, oh->_rt_va + reg_offs);
}
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
+{
+ u32 v;
+ int retval = 0;
+
+ if (!oh)
+ return -EINVAL;
+
+ v = oh->_sysc_cache;
+
+ retval = _set_slave_idlemode(oh, idlemode, &v);
+ if (!retval)
+ _write_sysconfig(v, oh);
+
+ return retval;
+}
+
/**
* omap_hwmod_register - register a struct omap_hwmod
* @oh: struct omap_hwmod *
*
- * Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod already
- * has been registered by the same name; -EINVAL if the omap_hwmod is in the
- * wrong state, or 0 on success.
+ * Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod
+ * already has been registered by the same name; -EINVAL if the
+ * omap_hwmod is in the wrong state, if @oh is NULL, if the
+ * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
+ * name, or if the omap_hwmod's class is missing a name; or 0 upon
+ * success.
*
* XXX The data should be copied into bootmem, so the original data
* should be marked __initdata and freed after init. This would allow
@@ -1012,7 +1097,8 @@
{
int ret, ms_id;
- if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
+ if (!oh || !oh->name || !oh->class || !oh->class->name ||
+ (oh->_state != _HWMOD_STATE_UNKNOWN))
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
@@ -1285,7 +1371,7 @@
{
BUG_ON(!oh);
- if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
+ if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
WARN(1, "omap_device: %s: OCP barrier impossible due to "
"device configuration\n", oh->name);
return;
@@ -1295,7 +1381,7 @@
* Forces posted writes to complete on the OCP thread handling
* register writes
*/
- omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+ omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
}
/**
@@ -1488,8 +1574,8 @@
*/
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
@@ -1513,8 +1599,8 @@
*/
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
{
- if (!oh->sysconfig ||
- !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
@@ -1523,3 +1609,52 @@
return 0;
}
+
+/**
+ * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
+ * @classname: struct omap_hwmod_class name to search for
+ * @fn: callback function pointer to call for each hwmod in class @classname
+ * @user: arbitrary context data to pass to the callback function
+ *
+ * For each omap_hwmod of class @classname, call @fn. Takes
+ * omap_hwmod_mutex to prevent the hwmod list from changing during the
+ * iteration. If the callback function returns something other than
+ * zero, the iterator is terminated, and the callback function's return
+ * value is passed back to the caller. Returns 0 upon success, -EINVAL
+ * if @classname or @fn are NULL, or passes back the error code from @fn.
+ */
+int omap_hwmod_for_each_by_class(const char *classname,
+ int (*fn)(struct omap_hwmod *oh,
+ void *user),
+ void *user)
+{
+ struct omap_hwmod *temp_oh;
+ int ret = 0;
+
+ if (!classname || !fn)
+ return -EINVAL;
+
+ pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
+ __func__, classname);
+
+ mutex_lock(&omap_hwmod_mutex);
+
+ list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+ if (!strcmp(temp_oh->class->name, classname)) {
+ pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
+ __func__, temp_oh->name);
+ ret = (*fn)(temp_oh, user);
+ if (ret)
+ break;
+ }
+ }
+
+ mutex_unlock(&omap_hwmod_mutex);
+
+ if (ret)
+ pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
similarity index 82%
rename from arch/arm/mach-omap2/omap_hwmod_2420.h
rename to arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a9ca1b9..eb7ee24 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1,7 +1,7 @@
/*
- * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
+ * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
*
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -9,20 +9,26 @@
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
- *
+ * XXX these should be marked initdata for multi-OMAP kernels
*/
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
-
-#ifdef CONFIG_ARCH_OMAP2420
-
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
+#include "omap_hwmod_common_data.h"
+
#include "prm-regbits-24xx.h"
+/*
+ * OMAP2420 hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation. Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
static struct omap_hwmod omap2420_mpu_hwmod;
static struct omap_hwmod omap2420_l3_hwmod;
static struct omap_hwmod omap2420_l4_core_hwmod;
@@ -54,6 +60,7 @@
/* L3 */
static struct omap_hwmod omap2420_l3_hwmod = {
.name = "l3_hwmod",
+ .class = &l3_hwmod_class,
.masters = omap2420_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l3_masters),
.slaves = omap2420_l3_slaves,
@@ -83,6 +90,7 @@
/* L4 CORE */
static struct omap_hwmod omap2420_l4_core_hwmod = {
.name = "l4_core_hwmod",
+ .class = &l4_hwmod_class,
.masters = omap2420_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
@@ -102,6 +110,7 @@
/* L4 WKUP */
static struct omap_hwmod omap2420_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
+ .class = &l4_hwmod_class,
.masters = omap2420_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
@@ -117,8 +126,8 @@
/* MPU */
static struct omap_hwmod omap2420_mpu_hwmod = {
.name = "mpu_hwmod",
- .clkdev_dev_id = NULL,
- .clkdev_con_id = "mpu_ck",
+ .class = &mpu_hwmod_class,
+ .main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -132,10 +141,9 @@
NULL,
};
-#else
-# define omap2420_hwmods 0
-#endif
-
-#endif
+int __init omap2420_hwmod_init(void)
+{
+ return omap_hwmod_init(omap2420_hwmods);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
similarity index 82%
rename from arch/arm/mach-omap2/omap_hwmod_2430.h
rename to arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 59a208b..241bd82 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1,7 +1,7 @@
/*
- * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
+ * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
*
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
@@ -9,20 +9,26 @@
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
- *
+ * XXX these should be marked initdata for multi-OMAP kernels
*/
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
-
-#ifdef CONFIG_ARCH_OMAP2430
-
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/dma.h>
+#include "omap_hwmod_common_data.h"
+
#include "prm-regbits-24xx.h"
+/*
+ * OMAP2430 hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation. Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
static struct omap_hwmod omap2430_mpu_hwmod;
static struct omap_hwmod omap2430_l3_hwmod;
static struct omap_hwmod omap2430_l4_core_hwmod;
@@ -54,6 +60,7 @@
/* L3 */
static struct omap_hwmod omap2430_l3_hwmod = {
.name = "l3_hwmod",
+ .class = &l3_hwmod_class,
.masters = omap2430_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l3_masters),
.slaves = omap2430_l3_slaves,
@@ -85,6 +92,7 @@
/* L4 CORE */
static struct omap_hwmod omap2430_l4_core_hwmod = {
.name = "l4_core_hwmod",
+ .class = &l4_hwmod_class,
.masters = omap2430_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
@@ -104,6 +112,7 @@
/* L4 WKUP */
static struct omap_hwmod omap2430_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
+ .class = &l4_hwmod_class,
.masters = omap2430_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
@@ -119,8 +128,8 @@
/* MPU */
static struct omap_hwmod omap2430_mpu_hwmod = {
.name = "mpu_hwmod",
- .clkdev_dev_id = NULL,
- .clkdev_con_id = "mpu_ck",
+ .class = &mpu_hwmod_class,
+ .main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -134,10 +143,9 @@
NULL,
};
-#else
-# define omap2430_hwmods 0
-#endif
-
-#endif
+int __init omap2430_hwmod_init(void)
+{
+ return omap_hwmod_init(omap2430_hwmods);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
deleted file mode 100644
index b6076b9..0000000
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
-
-#ifdef CONFIG_ARCH_OMAP34XX
-
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-
-#include "prm-regbits-34xx.h"
-
-static struct omap_hwmod omap34xx_mpu_hwmod;
-static struct omap_hwmod omap34xx_l3_hwmod;
-static struct omap_hwmod omap34xx_l4_core_hwmod;
-static struct omap_hwmod omap34xx_l4_per_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
- .master = &omap34xx_l3_hwmod,
- .slave = &omap34xx_l4_core_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
- .master = &omap34xx_l3_hwmod,
- .slave = &omap34xx_l4_per_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
- .master = &omap34xx_mpu_hwmod,
- .slave = &omap34xx_l3_hwmod,
- .user = OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
- &omap34xx_mpu__l3,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
- &omap34xx_l3__l4_core,
- &omap34xx_l3__l4_per,
-};
-
-/* L3 */
-static struct omap_hwmod omap34xx_l3_hwmod = {
- .name = "l3_hwmod",
- .masters = omap34xx_l3_masters,
- .masters_cnt = ARRAY_SIZE(omap34xx_l3_masters),
- .slaves = omap34xx_l3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-static struct omap_hwmod omap34xx_l4_wkup_hwmod;
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
- .master = &omap34xx_l4_core_hwmod,
- .slave = &omap34xx_l4_wkup_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
- &omap34xx_l3__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
- &omap34xx_l4_core__l4_wkup,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap34xx_l4_core_hwmod = {
- .name = "l4_core_hwmod",
- .masters = omap34xx_l4_core_masters,
- .masters_cnt = ARRAY_SIZE(omap34xx_l4_core_masters),
- .slaves = omap34xx_l4_core_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Slave interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
- &omap34xx_l3__l4_per,
-};
-
-/* Master interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
-};
-
-/* L4 PER */
-static struct omap_hwmod omap34xx_l4_per_hwmod = {
- .name = "l4_per_hwmod",
- .masters = omap34xx_l4_per_masters,
- .masters_cnt = ARRAY_SIZE(omap34xx_l4_per_masters),
- .slaves = omap34xx_l4_per_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
- &omap34xx_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
- .name = "l4_wkup_hwmod",
- .masters = omap34xx_l4_wkup_masters,
- .masters_cnt = ARRAY_SIZE(omap34xx_l4_wkup_masters),
- .slaves = omap34xx_l4_wkup_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
- &omap34xx_mpu__l3,
-};
-
-/* MPU */
-static struct omap_hwmod omap34xx_mpu_hwmod = {
- .name = "mpu_hwmod",
- .clkdev_dev_id = NULL,
- .clkdev_con_id = "arm_fck",
- .masters = omap34xx_mpu_masters,
- .masters_cnt = ARRAY_SIZE(omap34xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
- &omap34xx_l3_hwmod,
- &omap34xx_l4_core_hwmod,
- &omap34xx_l4_per_hwmod,
- &omap34xx_l4_wkup_hwmod,
- &omap34xx_mpu_hwmod,
- NULL,
-};
-
-#else
-# define omap34xx_hwmods 0
-#endif
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
new file mode 100644
index 0000000..ed60840
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -0,0 +1,181 @@
+/*
+ * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The data in this file should be completely autogeneratable from
+ * the TI hardware database or other technical documentation.
+ *
+ * XXX these should be marked initdata for multi-OMAP kernels
+ */
+#include <plat/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "prm-regbits-34xx.h"
+
+/*
+ * OMAP3xxx hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation. Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
+static struct omap_hwmod omap3xxx_mpu_hwmod;
+static struct omap_hwmod omap3xxx_l3_hwmod;
+static struct omap_hwmod omap3xxx_l4_core_hwmod;
+static struct omap_hwmod omap3xxx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = {
+ .master = &omap3xxx_l3_hwmod,
+ .slave = &omap3xxx_l4_core_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = {
+ .master = &omap3xxx_l3_hwmod,
+ .slave = &omap3xxx_l4_per_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = {
+ .master = &omap3xxx_mpu_hwmod,
+ .slave = &omap3xxx_l3_hwmod,
+ .user = OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = {
+ &omap3xxx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = {
+ &omap3xxx_l3__l4_core,
+ &omap3xxx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap3xxx_l3_hwmod = {
+ .name = "l3_hwmod",
+ .class = &l3_hwmod_class,
+ .masters = omap3xxx_l3_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters),
+ .slaves = omap3xxx_l3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_l4_wkup_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
+ &omap3xxx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
+ &omap3xxx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap3xxx_l4_core_hwmod = {
+ .name = "l4_core_hwmod",
+ .class = &l4_hwmod_class,
+ .masters = omap3xxx_l4_core_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters),
+ .slaves = omap3xxx_l4_core_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
+ &omap3xxx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap3xxx_l4_per_hwmod = {
+ .name = "l4_per_hwmod",
+ .class = &l4_hwmod_class,
+ .masters = omap3xxx_l4_per_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters),
+ .slaves = omap3xxx_l4_per_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
+ &omap3xxx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
+ .name = "l4_wkup_hwmod",
+ .class = &l4_hwmod_class,
+ .masters = omap3xxx_l4_wkup_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters),
+ .slaves = omap3xxx_l4_wkup_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
+ &omap3xxx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap3xxx_mpu_hwmod = {
+ .name = "mpu_hwmod",
+ .class = &mpu_hwmod_class,
+ .main_clk = "arm_fck",
+ .masters = omap3xxx_mpu_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
+ &omap3xxx_l3_hwmod,
+ &omap3xxx_l4_core_hwmod,
+ &omap3xxx_l4_per_hwmod,
+ &omap3xxx_l4_wkup_hwmod,
+ &omap3xxx_mpu_hwmod,
+ NULL,
+};
+
+int __init omap3xxx_hwmod_init(void)
+{
+ return omap_hwmod_init(omap3xxx_hwmods);
+}
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
new file mode 100644
index 0000000..1e80b91
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -0,0 +1,68 @@
+/*
+ * omap_hwmod common data structures
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ * Benoît Cousson
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This data/structures are to be used while defining OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ */
+
+#include <plat/omap_hwmod.h>
+
+#include "omap_hwmod_common_data.h"
+
+/**
+ * struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
+ *
+ * To be used by hwmod structure to specify the sysconfig offsets
+ * if the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420.
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = {
+ .midle_shift = SYSC_TYPE1_MIDLEMODE_SHIFT,
+ .clkact_shift = SYSC_TYPE1_CLOCKACTIVITY_SHIFT,
+ .sidle_shift = SYSC_TYPE1_SIDLEMODE_SHIFT,
+ .enwkup_shift = SYSC_TYPE1_ENAWAKEUP_SHIFT,
+ .srst_shift = SYSC_TYPE1_SOFTRESET_SHIFT,
+ .autoidle_shift = SYSC_TYPE1_AUTOIDLE_SHIFT,
+};
+
+/**
+ * struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
+ *
+ * To be used by hwmod structure to specify the sysconfig offsets if the
+ * device ip is compliant with the new PRCM protocol defined for new
+ * OMAP4 IPs.
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
+ .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT,
+ .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT,
+ .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
+};
+
+
+/*
+ * omap_hwmod class data
+ */
+
+struct omap_hwmod_class l3_hwmod_class = {
+ .name = "l3"
+};
+
+struct omap_hwmod_class l4_hwmod_class = {
+ .name = "l4"
+};
+
+struct omap_hwmod_class mpu_hwmod_class = {
+ .name = "mpu"
+};
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
new file mode 100644
index 0000000..3645a28
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -0,0 +1,24 @@
+/*
+ * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Benoît Cousson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
+
+#include <plat/omap_hwmod.h>
+
+/* OMAP hwmod classes - forward declarations */
+extern struct omap_hwmod_class l3_hwmod_class;
+extern struct omap_hwmod_class l4_hwmod_class;
+extern struct omap_hwmod_class mpu_hwmod_class;
+
+#endif
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
index ed6df04..38b7305 100644
--- a/arch/arm/mach-omap2/opp2xxx.h
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -417,7 +417,12 @@
extern const struct prcm_config omap2420_rate_table[];
+
+#ifdef CONFIG_ARCH_OMAP2430
extern const struct prcm_config omap2430_rate_table[];
+#else
+#define omap2430_rate_table NULL
+#endif
extern const struct prcm_config *rate_table;
extern const struct prcm_config *curr_prcm_set;
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a086626..c18f7f2 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -67,9 +67,9 @@
#if 0
/* MPU */
DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
- DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST);
DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
#endif
#if 0
@@ -93,7 +93,7 @@
DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
- DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST);
#endif
#if 0
/* DSP */
@@ -103,11 +103,11 @@
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST);
}
#endif
} else {
@@ -385,6 +385,11 @@
seq_printf(s, ",%s:%d", pwrdm_state_names[i],
pwrdm->state_counter[i]);
+ seq_printf(s, ",RET-LOGIC-OFF:%d", pwrdm->ret_logic_off_counter);
+ for (i = 0; i < pwrdm->banks; i++)
+ seq_printf(s, ",RET-MEMBANK%d-OFF:%d", i + 1,
+ pwrdm->ret_mem_off_counter[i]);
+
seq_printf(s, "\n");
return 0;
@@ -577,7 +582,7 @@
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
- pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
+ pwrdm_for_each(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 7a9c2d0..bd6466a 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -23,6 +23,22 @@
extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
+struct cpuidle_params {
+ u8 valid;
+ u32 sleep_latency;
+ u32 wake_latency;
+ u32 threshold;
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
+extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
+#else
+static
+inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+}
+#endif
+
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
@@ -37,6 +53,10 @@
#define omap2_pm_debug 0
#endif
+#if defined(CONFIG_CPU_IDLE)
+extern void omap3_cpuidle_update_states(void);
+#endif
+
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index cba05b9..374299e 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -57,11 +57,8 @@
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
-static struct powerdomain *mpu_pwrdm;
-static struct powerdomain *core_pwrdm;
-
-static struct clockdomain *dsp_clkdm;
-static struct clockdomain *gfx_clkdm;
+static struct powerdomain *mpu_pwrdm, *core_pwrdm;
+static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
static struct clk *osc_ck, *emul_ck;
@@ -219,11 +216,12 @@
/* Try to enter MPU retention */
prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
OMAP_LOGICRETSTATE,
- MPU_MOD, PM_PWSTCTRL);
+ MPU_MOD, OMAP2_PM_PWSTCTRL);
} else {
/* Block MPU retention */
- prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD,
+ OMAP2_PM_PWSTCTRL);
only_idle = 1;
}
@@ -333,9 +331,17 @@
.valid = suspend_valid_only_mem,
};
-static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
+/* XXX This function should be shareable between OMAP2xxx and OMAP3 */
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
- omap2_clkdm_allow_idle(clkdm);
+ clkdm_clear_all_wkdeps(clkdm);
+ clkdm_clear_all_sleepdeps(clkdm);
+
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
return 0;
}
@@ -348,14 +354,6 @@
prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
OMAP2_PRCM_SYSCONFIG_OFFSET);
- /* Set all domain wakeup dependencies */
- prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
- prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
- prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
- if (cpu_is_omap2430())
- prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
-
/*
* Set CORE powerdomain memory banks to retain their contents
* during RETENTION
@@ -384,8 +382,12 @@
pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
omap2_clkdm_sleep(gfx_clkdm);
- /* Enable clockdomain hardware-supervised control for all clkdms */
- clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
+ /*
+ * Clear clockdomain wakeup dependencies and enable
+ * hardware-supervised idle for all clkdms
+ */
+ clkdm_for_each(clkdms_setup, NULL);
+ clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
/* Enable clock autoidle for all domains */
cm_write_mod_reg(OMAP24XX_AUTO_CAM |
@@ -481,7 +483,7 @@
l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
- /* Look up important powerdomains, clockdomains */
+ /* Look up important powerdomains */
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
if (!mpu_pwrdm)
@@ -491,9 +493,19 @@
if (!core_pwrdm)
pr_err("PM: core_pwrdm not found\n");
+ /* Look up important clockdomains */
+
+ mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ if (!mpu_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
+ if (!wkup_clkdm)
+ pr_err("PM: wkup_clkdm not found\n");
+
dsp_clkdm = clkdm_lookup("dsp_clkdm");
if (!dsp_clkdm)
- pr_err("PM: mpu_clkdm not found\n");
+ pr_err("PM: dsp_clkdm not found\n");
gfx_clkdm = clkdm_lookup("gfx_clkdm");
if (!gfx_clkdm)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 910a7ac..fee2efb 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -685,10 +685,10 @@
prm_write_mod_reg(OMAP3430_RST1_IVA2 |
OMAP3430_RST2_IVA2 |
OMAP3430_RST3_IVA2,
- OMAP3430_IVA2_MOD, RM_RSTCTRL);
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Enable IVA2 clock */
- cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Set IVA2 boot mode to 'idle' */
@@ -696,7 +696,7 @@
OMAP343X_CONTROL_IVA2_BOOTMOD);
/* Un-reset IVA2 */
- prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Disable IVA2 clock */
cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
@@ -705,7 +705,7 @@
prm_write_mod_reg(OMAP3430_RST1_IVA2 |
OMAP3430_RST2_IVA2 |
OMAP3430_RST3_IVA2,
- OMAP3430_IVA2_MOD, RM_RSTCTRL);
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
}
static void __init omap3_d2d_idle(void)
@@ -728,8 +728,8 @@
/* reset modem */
prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
- CORE_MOD, RM_RSTCTRL);
- prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+ CORE_MOD, OMAP2_RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
}
static void __init prcm_setup_regs(void)
@@ -916,13 +916,13 @@
prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
/* Clear any pending 'reset' flags */
- prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
@@ -941,6 +941,10 @@
else
state = PWRDM_POWER_RET;
+#ifdef CONFIG_CPU_IDLE
+ omap3_cpuidle_update_states();
+#endif
+
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->next_state = state;
set_pwrdm_state(pwrst->pwrdm, state);
@@ -998,6 +1002,9 @@
*/
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
+ clkdm_clear_all_wkdeps(clkdm);
+ clkdm_clear_all_sleepdeps(clkdm);
+
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
omap2_clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
@@ -1018,6 +1025,7 @@
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
+ struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
int ret;
if (!cpu_is_omap34xx())
@@ -1057,6 +1065,11 @@
core_pwrdm = pwrdm_lookup("core_pwrdm");
cam_pwrdm = pwrdm_lookup("cam_pwrdm");
+ neon_clkdm = clkdm_lookup("neon_clkdm");
+ mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ core_clkdm = clkdm_lookup("core_clkdm");
+
omap_push_sram_idle();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
@@ -1065,14 +1078,14 @@
pm_idle = omap3_pm_idle;
omap3_idle_init();
- pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
+ clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
/*
* REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
* IO-pad wakeup. Otherwise it will unnecessarily waste power
* waking up PER with every CORE wakeup - see
* http://marc.info/?l=linux-omap&m=121852150710062&w=2
*/
- pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+ clkdm_add_wkdep(per_clkdm, core_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 26b3f3e..9a0fb385 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -2,10 +2,12 @@
* OMAP powerdomain control
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
*
+ * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -26,12 +28,15 @@
#include "cm.h"
#include "cm-regbits-34xx.h"
+#include "cm-regbits-44xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
#include <plat/cpu.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#include <plat/prcm.h>
#include "pm.h"
@@ -40,29 +45,43 @@
PWRDM_STATE_PREV,
};
+/* Variable holding value of the CPU dependent PWRSTCTRL Register Offset */
+static u16 pwrstctrl_reg_offs;
+
+/* Variable holding value of the CPU dependent PWRSTST Register Offset */
+static u16 pwrstst_reg_offs;
+
+/* OMAP3 and OMAP4 specific register bit initialisations
+ * Notice that the names here are not according to each power
+ * domain but the bit mapping used applies to all of them
+ */
+
+/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
+#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
+#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
+#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
+#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
+#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
+#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE
+#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE
+#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE
+#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE
+#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Status bits */
+#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
+#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
+#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
+#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
+#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
+
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
-/*
- * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to
- * protect pwrdm_clkdms[] during clkdm add/del ops
- */
-static DEFINE_RWLOCK(pwrdm_rwlock);
-
-
/* Private functions */
-static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
static struct powerdomain *_pwrdm_lookup(const char *name)
{
struct powerdomain *pwrdm, *temp_pwrdm;
@@ -79,32 +98,63 @@
return pwrdm;
}
-/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */
-static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
- struct pwrdm_dep *deps)
+/**
+ * _pwrdm_register - register a powerdomain
+ * @pwrdm: struct powerdomain * to register
+ *
+ * Adds a powerdomain to the internal powerdomain list. Returns
+ * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+static int _pwrdm_register(struct powerdomain *pwrdm)
{
- struct pwrdm_dep *pd;
+ int i;
- if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
- return ERR_PTR(-EINVAL);
+ if (!pwrdm)
+ return -EINVAL;
- for (pd = deps; pd->pwrdm_name; pd++) {
+ if (!omap_chip_is(pwrdm->omap_chip))
+ return -EINVAL;
- if (!omap_chip_is(pd->omap_chip))
- continue;
+ if (_pwrdm_lookup(pwrdm->name))
+ return -EEXIST;
- if (!pd->pwrdm && pd->pwrdm_name)
- pd->pwrdm = pwrdm_lookup(pd->pwrdm_name);
+ list_add(&pwrdm->node, &pwrdm_list);
- if (pd->pwrdm == pwrdm)
- break;
+ /* Initialize the powerdomain's state counter */
+ for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
+ pwrdm->state_counter[i] = 0;
+ pwrdm->ret_logic_off_counter = 0;
+ for (i = 0; i < pwrdm->banks; i++)
+ pwrdm->ret_mem_off_counter[i] = 0;
+
+ pwrdm_wait_transition(pwrdm);
+ pwrdm->state = pwrdm_read_pwrst(pwrdm);
+ pwrdm->state_counter[pwrdm->state] = 1;
+
+ pr_debug("powerdomain: registered %s\n", pwrdm->name);
+
+ return 0;
+}
+
+static void _update_logic_membank_counters(struct powerdomain *pwrdm)
+{
+ int i;
+ u8 prev_logic_pwrst, prev_mem_pwrst;
+
+ prev_logic_pwrst = pwrdm_read_prev_logic_pwrst(pwrdm);
+ if ((pwrdm->pwrsts_logic_ret == PWRSTS_OFF_RET) &&
+ (prev_logic_pwrst == PWRDM_POWER_OFF))
+ pwrdm->ret_logic_off_counter++;
+
+ for (i = 0; i < pwrdm->banks; i++) {
+ prev_mem_pwrst = pwrdm_read_prev_mem_pwrst(pwrdm, i);
+
+ if ((pwrdm->pwrsts_mem_ret[i] == PWRSTS_OFF_RET) &&
+ (prev_mem_pwrst == PWRDM_POWER_OFF))
+ pwrdm->ret_mem_off_counter[i]++;
}
-
- if (!pd->pwrdm_name)
- return ERR_PTR(-ENOENT);
-
- return pd->pwrdm;
}
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
@@ -126,6 +176,8 @@
prev = pwrdm_read_prev_pwrst(pwrdm);
if (pwrdm->state != prev)
pwrdm->state_counter[prev]++;
+ if (prev == PWRDM_POWER_RET)
+ _update_logic_membank_counters(pwrdm);
break;
default:
return -EINVAL;
@@ -154,134 +206,71 @@
return 0;
}
-static __init void _pwrdm_setup(struct powerdomain *pwrdm)
-{
- int i;
-
- for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
- pwrdm->state_counter[i] = 0;
-
- pwrdm_wait_transition(pwrdm);
- pwrdm->state = pwrdm_read_pwrst(pwrdm);
- pwrdm->state_counter[pwrdm->state] = 1;
-
-}
-
/* Public functions */
/**
* pwrdm_init - set up the powerdomain layer
+ * @pwrdm_list: array of struct powerdomain pointers to register
*
- * Loop through the list of powerdomains, registering all that are
- * available on the current CPU. If pwrdm_list is supplied and not
- * null, all of the referenced powerdomains will be registered. No
- * return value.
+ * Loop through the array of powerdomains @pwrdm_list, registering all
+ * that are available on the current CPU. If pwrdm_list is supplied
+ * and not null, all of the referenced powerdomains will be
+ * registered. No return value. XXX pwrdm_list is not really a
+ * "list"; it is an array. Rename appropriately.
*/
void pwrdm_init(struct powerdomain **pwrdm_list)
{
struct powerdomain **p = NULL;
+ if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
+ pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
+ pwrstst_reg_offs = OMAP2_PM_PWSTST;
+ } else if (cpu_is_omap44xx()) {
+ pwrstctrl_reg_offs = OMAP4_PM_PWSTCTRL;
+ pwrstst_reg_offs = OMAP4_PM_PWSTST;
+ } else {
+ printk(KERN_ERR "Power Domain struct not supported for " \
+ "this CPU\n");
+ return;
+ }
+
if (pwrdm_list) {
- for (p = pwrdm_list; *p; p++) {
- pwrdm_register(*p);
- _pwrdm_setup(*p);
- }
+ for (p = pwrdm_list; *p; p++)
+ _pwrdm_register(*p);
}
}
/**
- * pwrdm_register - register a powerdomain
- * @pwrdm: struct powerdomain * to register
- *
- * Adds a powerdomain to the internal powerdomain list. Returns
- * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
- * already registered by the provided name, or 0 upon success.
- */
-int pwrdm_register(struct powerdomain *pwrdm)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!pwrdm)
- return -EINVAL;
-
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
- write_lock_irqsave(&pwrdm_rwlock, flags);
- if (_pwrdm_lookup(pwrdm->name)) {
- ret = -EEXIST;
- goto pr_unlock;
- }
-
- list_add(&pwrdm->node, &pwrdm_list);
-
- pr_debug("powerdomain: registered %s\n", pwrdm->name);
- ret = 0;
-
-pr_unlock:
- write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
- return ret;
-}
-
-/**
- * pwrdm_unregister - unregister a powerdomain
- * @pwrdm: struct powerdomain * to unregister
- *
- * Removes a powerdomain from the internal powerdomain list. Returns
- * -EINVAL if pwrdm argument is NULL.
- */
-int pwrdm_unregister(struct powerdomain *pwrdm)
-{
- unsigned long flags;
-
- if (!pwrdm)
- return -EINVAL;
-
- write_lock_irqsave(&pwrdm_rwlock, flags);
- list_del(&pwrdm->node);
- write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
- pr_debug("powerdomain: unregistered %s\n", pwrdm->name);
-
- return 0;
-}
-
-/**
* pwrdm_lookup - look up a powerdomain by name, return a pointer
* @name: name of powerdomain
*
- * Find a registered powerdomain by its name. Returns a pointer to the
- * struct powerdomain if found, or NULL otherwise.
+ * Find a registered powerdomain by its name @name. Returns a pointer
+ * to the struct powerdomain if found, or NULL otherwise.
*/
struct powerdomain *pwrdm_lookup(const char *name)
{
struct powerdomain *pwrdm;
- unsigned long flags;
if (!name)
return NULL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
pwrdm = _pwrdm_lookup(name);
- read_unlock_irqrestore(&pwrdm_rwlock, flags);
return pwrdm;
}
/**
- * pwrdm_for_each_nolock - call function on each registered clockdomain
+ * pwrdm_for_each - call function on each registered clockdomain
* @fn: callback function *
*
- * Call the supplied function for each registered powerdomain. The
- * callback function can return anything but 0 to bail out early from
- * the iterator. Returns the last return value of the callback function, which
- * should be 0 for success or anything else to indicate failure; or -EINVAL if
- * the function pointer is null.
+ * Call the supplied function @fn for each registered powerdomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator. Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
*/
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
{
struct powerdomain *temp_pwrdm;
int ret = 0;
@@ -299,40 +288,17 @@
}
/**
- * pwrdm_for_each - call function on each registered clockdomain
- * @fn: callback function *
- *
- * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
- * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware powerdomain
- * control functions are fine.
- */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
-{
- unsigned long flags;
- int ret;
-
- read_lock_irqsave(&pwrdm_rwlock, flags);
- ret = pwrdm_for_each_nolock(fn, user);
- read_unlock_irqrestore(&pwrdm_rwlock, flags);
-
- return ret;
-}
-
-/**
* pwrdm_add_clkdm - add a clockdomain to a powerdomain
* @pwrdm: struct powerdomain * to add the clockdomain to
* @clkdm: struct clockdomain * to associate with a powerdomain
*
- * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'. This
+ * Associate the clockdomain @clkdm with a powerdomain @pwrdm. This
* enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if
* presented with invalid pointers; -ENOMEM if memory could not be allocated;
* or 0 upon success.
*/
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
{
- unsigned long flags;
int i;
int ret = -EINVAL;
@@ -342,8 +308,6 @@
pr_debug("powerdomain: associating clockdomain %s with powerdomain "
"%s\n", clkdm->name, pwrdm->name);
- write_lock_irqsave(&pwrdm_rwlock, flags);
-
for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
if (!pwrdm->pwrdm_clkdms[i])
break;
@@ -368,8 +332,6 @@
ret = 0;
pac_exit:
- write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
return ret;
}
@@ -378,14 +340,13 @@
* @pwrdm: struct powerdomain * to add the clockdomain to
* @clkdm: struct clockdomain * to associate with a powerdomain
*
- * Dissociate the clockdomain 'clkdm' from the powerdomain
- * 'pwrdm'. Returns -EINVAL if presented with invalid pointers;
- * -ENOENT if the clkdm was not associated with the powerdomain, or 0
- * upon success.
+ * Dissociate the clockdomain @clkdm from the powerdomain
+ * @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT
+ * if @clkdm was not associated with the powerdomain, or 0 upon
+ * success.
*/
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
{
- unsigned long flags;
int ret = -EINVAL;
int i;
@@ -395,8 +356,6 @@
pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
"%s\n", clkdm->name, pwrdm->name);
- write_lock_irqsave(&pwrdm_rwlock, flags);
-
for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
if (pwrdm->pwrdm_clkdms[i] == clkdm)
break;
@@ -413,8 +372,6 @@
ret = 0;
pdc_exit:
- write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
return ret;
}
@@ -423,259 +380,34 @@
* @pwrdm: struct powerdomain * to iterate over
* @fn: callback function *
*
- * Call the supplied function for each clockdomain in the powerdomain
- * 'pwrdm'. The callback function can return anything but 0 to bail
- * out early from the iterator. The callback function is called with
- * the pwrdm_rwlock held for reading, so no powerdomain structure
- * manipulation functions should be called from the callback, although
- * hardware powerdomain control functions are fine. Returns -EINVAL
- * if presented with invalid pointers; or passes along the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure.
+ * Call the supplied function @fn for each clockdomain in the powerdomain
+ * @pwrdm. The callback function can return anything but 0 to bail
+ * out early from the iterator. Returns -EINVAL if presented with
+ * invalid pointers; or passes along the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure.
*/
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm))
{
- unsigned long flags;
int ret = 0;
int i;
if (!fn)
return -EINVAL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
-
for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
- read_unlock_irqrestore(&pwrdm_rwlock, flags);
-
return ret;
}
-
-/**
- * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * When the powerdomain represented by pwrdm2 wakes up (due to an
- * interrupt), wake up pwrdm1. Implemented in hardware on the OMAP,
- * this feature is designed to reduce wakeup latency of the dependent
- * powerdomain. Returns -EINVAL if presented with invalid powerdomain
- * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
- * 0 upon success.
- */
-int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
- return PTR_ERR(p);
- }
-
- pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
- pwrdm1->name, pwrdm2->name);
-
- prm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
- pwrdm1->prcm_offs, PM_WKDEP);
-
- return 0;
-}
-
-/**
- * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2
- * wakes up. Returns -EINVAL if presented with invalid powerdomain
- * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
- * 0 upon success.
- */
-int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
- return PTR_ERR(p);
- }
-
- pr_debug("powerdomain: hardware will no longer wake up %s after %s "
- "wakes up\n", pwrdm1->name, pwrdm2->name);
-
- prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
- pwrdm1->prcm_offs, PM_WKDEP);
-
- return 0;
-}
-
-/**
- * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be
- * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL
- * if either powerdomain pointer is invalid; or -ENOENT if the hardware
- * is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * wakeup dependencies. Wakeup dependencies fixed in hardware are not
- * yet handled here.
- */
-int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
- return PTR_ERR(p);
- }
-
- return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
- (1 << pwrdm2->dep_bit));
-}
-
-/**
- * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Prevent pwrdm1 from automatically going inactive (and then to
- * retention or off) if pwrdm2 is still active. Returns -EINVAL if
- * presented with invalid powerdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep dependencies,
- * -ENOENT if the specified dependency cannot be set in hardware, or
- * 0 upon success.
- */
-int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!cpu_is_omap34xx())
- return -EINVAL;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", pwrdm1->name,
- pwrdm2->name);
- return PTR_ERR(p);
- }
-
- pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
- pwrdm1->name, pwrdm2->name);
-
- cm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
- pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
-
- return 0;
-}
-
-/**
- * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Allow pwrdm1 to automatically go inactive (and then to retention or
- * off), independent of the activity state of pwrdm2. Returns -EINVAL
- * if presented with invalid powerdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep dependencies,
- * -ENOENT if the specified dependency cannot be cleared in hardware, or
- * 0 upon success.
- */
-int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!cpu_is_omap34xx())
- return -EINVAL;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", pwrdm1->name,
- pwrdm2->name);
- return PTR_ERR(p);
- }
-
- pr_debug("powerdomain: will no longer prevent %s from sleeping if "
- "%s is active\n", pwrdm1->name, pwrdm2->name);
-
- cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
- pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
-
- return 0;
-}
-
-/**
- * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will
- * not be allowed to automatically go inactive if pwrdm2 is active;
- * 0 if pwrdm1's automatic power state inactivity transition is independent
- * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called
- * on a machine that does not support software-configurable hardware sleep
- * dependencies; or -ENOENT if the hardware is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * sleep dependencies. Sleep dependencies fixed in hardware are not
- * yet handled here.
- */
-int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
- struct powerdomain *p;
-
- if (!cpu_is_omap34xx())
- return -EINVAL;
-
- if (!pwrdm1)
- return -EINVAL;
-
- p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
- if (IS_ERR(p)) {
- pr_debug("powerdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", pwrdm1->name,
- pwrdm2->name);
- return PTR_ERR(p);
- }
-
- return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
- (1 << pwrdm2->dep_bit));
-}
-
/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
- * Return the number of controllable memory banks in powerdomain pwrdm,
+ * Return the number of controllable memory banks in powerdomain @pwrdm,
* starting with 1. Returns -EINVAL if the powerdomain pointer is null.
*/
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
@@ -691,7 +423,7 @@
* @pwrdm: struct powerdomain * to set
* @pwrst: one of the PWRDM_POWER_* macros
*
- * Set the powerdomain pwrdm's next power state to pwrst. The powerdomain
+ * Set the powerdomain @pwrdm's next power state to @pwrst. The powerdomain
* may not enter this state immediately if the preconditions for this state
* have not been satisfied. Returns -EINVAL if the powerdomain pointer is
* null or if the power state is invalid for the powerdomin, or returns 0
@@ -710,7 +442,7 @@
prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, PM_PWSTCTRL);
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
@@ -719,7 +451,7 @@
* pwrdm_read_next_pwrst - get next powerdomain power state
* @pwrdm: struct powerdomain * to get power state
*
- * Return the powerdomain pwrdm's next power state. Returns -EINVAL
+ * Return the powerdomain @pwrdm's next power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the next power state
* upon success.
*/
@@ -728,15 +460,15 @@
if (!pwrdm)
return -EINVAL;
- return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL,
- OMAP_POWERSTATE_MASK);
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ pwrstctrl_reg_offs, OMAP_POWERSTATE_MASK);
}
/**
* pwrdm_read_pwrst - get current powerdomain power state
* @pwrdm: struct powerdomain * to get power state
*
- * Return the powerdomain pwrdm's current power state. Returns -EINVAL
+ * Return the powerdomain @pwrdm's current power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the current power state
* upon success.
*/
@@ -745,15 +477,15 @@
if (!pwrdm)
return -EINVAL;
- return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
- OMAP_POWERSTATEST_MASK);
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ pwrstst_reg_offs, OMAP_POWERSTATEST_MASK);
}
/**
* pwrdm_read_prev_pwrst - get previous powerdomain power state
* @pwrdm: struct powerdomain * to get previous power state
*
- * Return the powerdomain pwrdm's previous power state. Returns -EINVAL
+ * Return the powerdomain @pwrdm's previous power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the previous power state
* upon success.
*/
@@ -771,11 +503,11 @@
* @pwrdm: struct powerdomain * to set
* @pwrst: one of the PWRDM_POWER_* macros
*
- * Set the next power state that the logic portion of the powerdomain
- * pwrdm will enter when the powerdomain enters retention. This will
- * be either RETENTION or OFF, if supported. Returns -EINVAL if the
- * powerdomain pointer is null or the target power state is not not
- * supported, or returns 0 upon success.
+ * Set the next power state @pwrst that the logic portion of the
+ * powerdomain @pwrdm will enter when the powerdomain enters retention.
+ * This will be either RETENTION or OFF, if supported. Returns
+ * -EINVAL if the powerdomain pointer is null or the target power
+ * state is not not supported, or returns 0 upon success.
*/
int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
@@ -796,7 +528,7 @@
*/
prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
(pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
- pwrdm->prcm_offs, PM_PWSTCTRL);
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
@@ -807,13 +539,14 @@
* @bank: memory bank number to set (0-3)
* @pwrst: one of the PWRDM_POWER_* macros
*
- * Set the next power state that memory bank x of the powerdomain
- * pwrdm will enter when the powerdomain enters the ON state. Bank
- * will be a number from 0 to 3, and represents different types of
- * memory, depending on the powerdomain. Returns -EINVAL if the
- * powerdomain pointer is null or the target power state is not not
- * supported for this memory bank, -EEXIST if the target memory bank
- * does not exist or is not controllable, or returns 0 upon success.
+ * Set the next power state @pwrst that memory bank @bank of the
+ * powerdomain @pwrdm will enter when the powerdomain enters the ON
+ * state. @bank will be a number from 0 to 3, and represents different
+ * types of memory, depending on the powerdomain. Returns -EINVAL if
+ * the powerdomain pointer is null or the target power state is not
+ * not supported for this memory bank, -EEXIST if the target memory
+ * bank does not exist or is not controllable, or returns 0 upon
+ * success.
*/
int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
{
@@ -839,16 +572,19 @@
*/
switch (bank) {
case 0:
- m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK;
+ m = OMAP_MEM0_ONSTATE_MASK;
break;
case 1:
- m = OMAP3430_L1FLATMEMONSTATE_MASK;
+ m = OMAP_MEM1_ONSTATE_MASK;
break;
case 2:
- m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK;
+ m = OMAP_MEM2_ONSTATE_MASK;
break;
case 3:
- m = OMAP3430_L2FLATMEMONSTATE_MASK;
+ m = OMAP_MEM3_ONSTATE_MASK;
+ break;
+ case 4:
+ m = OMAP_MEM4_ONSTATE_MASK;
break;
default:
WARN_ON(1); /* should never happen */
@@ -856,7 +592,7 @@
}
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, PM_PWSTCTRL);
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
@@ -867,14 +603,15 @@
* @bank: memory bank number to set (0-3)
* @pwrst: one of the PWRDM_POWER_* macros
*
- * Set the next power state that memory bank x of the powerdomain
- * pwrdm will enter when the powerdomain enters the RETENTION state.
- * Bank will be a number from 0 to 3, and represents different types
- * of memory, depending on the powerdomain. pwrst will be either
- * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain
- * pointer is null or the target power state is not not supported for
- * this memory bank, -EEXIST if the target memory bank does not exist
- * or is not controllable, or returns 0 upon success.
+ * Set the next power state @pwrst that memory bank @bank of the
+ * powerdomain @pwrdm will enter when the powerdomain enters the
+ * RETENTION state. Bank will be a number from 0 to 3, and represents
+ * different types of memory, depending on the powerdomain. @pwrst
+ * will be either RETENTION or OFF, if supported. Returns -EINVAL if
+ * the powerdomain pointer is null or the target power state is not
+ * not supported for this memory bank, -EEXIST if the target memory
+ * bank does not exist or is not controllable, or returns 0 upon
+ * success.
*/
int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
{
@@ -900,16 +637,19 @@
*/
switch (bank) {
case 0:
- m = OMAP3430_SHAREDL1CACHEFLATRETSTATE;
+ m = OMAP_MEM0_RETSTATE_MASK;
break;
case 1:
- m = OMAP3430_L1FLATMEMRETSTATE;
+ m = OMAP_MEM1_RETSTATE_MASK;
break;
case 2:
- m = OMAP3430_SHAREDL2CACHEFLATRETSTATE;
+ m = OMAP_MEM2_RETSTATE_MASK;
break;
case 3:
- m = OMAP3430_L2FLATMEMRETSTATE;
+ m = OMAP_MEM3_RETSTATE_MASK;
+ break;
+ case 4:
+ m = OMAP_MEM4_RETSTATE_MASK;
break;
default:
WARN_ON(1); /* should never happen */
@@ -917,7 +657,7 @@
}
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- PM_PWSTCTRL);
+ pwrstctrl_reg_offs);
return 0;
}
@@ -926,27 +666,27 @@
* pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
* @pwrdm: struct powerdomain * to get current logic retention power state
*
- * Return the current power state that the logic portion of
- * powerdomain pwrdm will enter
- * Returns -EINVAL if the powerdomain pointer is null or returns the
- * current logic retention power state upon success.
+ * Return the power state that the logic portion of powerdomain @pwrdm
+ * will enter when the powerdomain enters retention. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the logic retention
+ * power state upon success.
*/
int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
- return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
- OMAP3430_LOGICSTATEST);
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ pwrstst_reg_offs, OMAP3430_LOGICSTATEST);
}
/**
* pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
* @pwrdm: struct powerdomain * to get previous logic power state
*
- * Return the powerdomain pwrdm's logic power state. Returns -EINVAL
- * if the powerdomain pointer is null or returns the previous logic
- * power state upon success.
+ * Return the powerdomain @pwrdm's previous logic power state. Returns
+ * -EINVAL if the powerdomain pointer is null or returns the previous
+ * logic power state upon success.
*/
int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
@@ -964,12 +704,35 @@
}
/**
+ * pwrdm_read_logic_retst - get next powerdomain logic power state
+ * @pwrdm: struct powerdomain * to get next logic power state
+ *
+ * Return the powerdomain pwrdm's logic power state. Returns -EINVAL
+ * if the powerdomain pointer is null or returns the next logic
+ * power state upon success.
+ */
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
+ OMAP3430_LOGICSTATEST);
+}
+
+/**
* pwrdm_read_mem_pwrst - get current memory bank power state
* @pwrdm: struct powerdomain * to get current memory bank power state
* @bank: memory bank number (0-3)
*
- * Return the powerdomain pwrdm's current memory power state for bank
- * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * Return the powerdomain @pwrdm's current memory power state for bank
+ * @bank. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
* the target memory bank does not exist or is not controllable, or
* returns the current memory power state upon success.
*/
@@ -994,23 +757,27 @@
*/
switch (bank) {
case 0:
- m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK;
+ m = OMAP_MEM0_STATEST_MASK;
break;
case 1:
- m = OMAP3430_L1FLATMEMSTATEST_MASK;
+ m = OMAP_MEM1_STATEST_MASK;
break;
case 2:
- m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK;
+ m = OMAP_MEM2_STATEST_MASK;
break;
case 3:
- m = OMAP3430_L2FLATMEMSTATEST_MASK;
+ m = OMAP_MEM3_STATEST_MASK;
+ break;
+ case 4:
+ m = OMAP_MEM4_STATEST_MASK;
break;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
- return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m);
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ pwrstst_reg_offs, m);
}
/**
@@ -1018,10 +785,11 @@
* @pwrdm: struct powerdomain * to get previous memory bank power state
* @bank: memory bank number (0-3)
*
- * Return the powerdomain pwrdm's previous memory power state for bank
- * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
- * the target memory bank does not exist or is not controllable, or
- * returns the previous memory power state upon success.
+ * Return the powerdomain @pwrdm's previous memory power state for
+ * bank @bank. Returns -EINVAL if the powerdomain pointer is null,
+ * -EEXIST if the target memory bank does not exist or is not
+ * controllable, or returns the previous memory power state upon
+ * success.
*/
int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
@@ -1065,13 +833,63 @@
}
/**
+ * pwrdm_read_mem_retst - get next memory bank power state
+ * @pwrdm: struct powerdomain * to get mext memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's next memory power state for bank
+ * x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the next memory power state upon success.
+ */
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (pwrdm->banks < (bank + 1))
+ return -EEXIST;
+
+ /*
+ * The register bit names below may not correspond to the
+ * actual names of the bits in each powerdomain's register,
+ * but the type of value returned is the same for each
+ * powerdomain.
+ */
+ switch (bank) {
+ case 0:
+ m = OMAP_MEM0_RETSTATE_MASK;
+ break;
+ case 1:
+ m = OMAP_MEM1_RETSTATE_MASK;
+ break;
+ case 2:
+ m = OMAP_MEM2_RETSTATE_MASK;
+ break;
+ case 3:
+ m = OMAP_MEM3_RETSTATE_MASK;
+ break;
+ case 4:
+ m = OMAP_MEM4_RETSTATE_MASK;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ pwrstctrl_reg_offs, m);
+}
+
+/**
* pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
* @pwrdm: struct powerdomain * to clear
*
- * Clear the powerdomain's previous power state register. Clears the
- * entire register, including logic and memory bank previous power states.
- * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon
- * success.
+ * Clear the powerdomain's previous power state register @pwrdm.
+ * Clears the entire register, including logic and memory bank
+ * previous power states. Returns -EINVAL if the powerdomain pointer
+ * is null, or returns 0 upon success.
*/
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
@@ -1096,11 +914,11 @@
* @pwrdm: struct powerdomain *
*
* Enable automatic context save-and-restore upon power state change
- * for some devices in a powerdomain. Warning: this only affects a
- * subset of devices in a powerdomain; check the TRM closely. Returns
- * -EINVAL if the powerdomain pointer is null or if the powerdomain
- * does not support automatic save-and-restore, or returns 0 upon
- * success.
+ * for some devices in the powerdomain @pwrdm. Warning: this only
+ * affects a subset of devices in a powerdomain; check the TRM
+ * closely. Returns -EINVAL if the powerdomain pointer is null or if
+ * the powerdomain does not support automatic save-and-restore, or
+ * returns 0 upon success.
*/
int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
{
@@ -1114,7 +932,7 @@
pwrdm->name);
prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- pwrdm->prcm_offs, PM_PWSTCTRL);
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
@@ -1124,11 +942,11 @@
* @pwrdm: struct powerdomain *
*
* Disable automatic context save-and-restore upon power state change
- * for some devices in a powerdomain. Warning: this only affects a
- * subset of devices in a powerdomain; check the TRM closely. Returns
- * -EINVAL if the powerdomain pointer is null or if the powerdomain
- * does not support automatic save-and-restore, or returns 0 upon
- * success.
+ * for some devices in the powerdomain @pwrdm. Warning: this only
+ * affects a subset of devices in a powerdomain; check the TRM
+ * closely. Returns -EINVAL if the powerdomain pointer is null or if
+ * the powerdomain does not support automatic save-and-restore, or
+ * returns 0 upon success.
*/
int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
{
@@ -1142,7 +960,7 @@
pwrdm->name);
prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
- pwrdm->prcm_offs, PM_PWSTCTRL);
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
@@ -1151,7 +969,7 @@
* pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
* @pwrdm: struct powerdomain *
*
- * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore
+ * Returns 1 if powerdomain @pwrdm supports hardware save-and-restore
* for some devices, or 0 if it does not.
*/
bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
@@ -1163,7 +981,7 @@
* pwrdm_wait_transition - wait for powerdomain power transition to finish
* @pwrdm: struct powerdomain * to wait for
*
- * If the powerdomain pwrdm is in the process of a state transition,
+ * If the powerdomain @pwrdm is in the process of a state transition,
* spin until it completes the power transition, or until an iteration
* bailout value is reached. Returns -EINVAL if the powerdomain
* pointer is null, -EAGAIN if the bailout value was reached, or
@@ -1183,10 +1001,10 @@
*/
/* XXX Is this udelay() value meaningful? */
- while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) &
+ while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
OMAP_INTRANSITION) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
+ udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
printk(KERN_ERR "powerdomain: waited too long for "
@@ -1213,12 +1031,6 @@
return -EINVAL;
}
-int pwrdm_clk_state_switch(struct clk *clk)
-{
- if (clk != NULL && clk->clkdm != NULL)
- return pwrdm_clkdm_state_switch(clk->clkdm);
- return -EINVAL;
-}
int pwrdm_pre_transition(void)
{
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 057b2e3..105cbca 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -1,8 +1,8 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
* Debugging and integration fixes by Jouni Högander
@@ -12,26 +12,21 @@
* published by the Free Software Foundation.
*/
+/*
+ * To Do List
+ * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
+ * Clock Domain Framework
+ */
+
#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
/*
* This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34XX chips.
- *
- * A few notes:
+ * of software control for the OMAP24xx and OMAP34xx chips.
*
* This is not an exhaustive listing of powerdomains on the chips; only
* powerdomains that can be controlled in software.
- *
- * A useful validation rule for struct powerdomain:
- * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
- * must have a dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really
- * just software-controllable dependencies. Non-software-controllable
- * dependencies do exist, but they are not encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
*/
/*
@@ -41,26 +36,17 @@
*
* On the 2420, this is a 'C55 DSP called, simply, the DSP. Its
* powerdomain is called the "DSP power domain." On the 2430, the
- * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1. Its
- * powerdomain is still called the "DSP power domain." On the 3430,
- * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
- * its powerdomain is now called the "IVA2 power domain."
+ * on-board DSP is a 'C64 DSP, now called (along with its hardware
+ * accelerators) the IVA2 or IVA2.1. Its powerdomain is still called
+ * the "DSP power domain." On the 3430, the DSP is a 'C64 DSP like the
+ * 2430, also known as the IVA2; but its powerdomain is now called the
+ * "IVA2 power domain."
*
* The 2420 also has something called the IVA, which is a separate ARM
* core, and has nothing to do with the DSP/IVA2.
*
* Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
* address offset is different between the C55 and C64 DSPs.
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- */
-
-/*
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
*/
#include <plat/powerdomain.h>
@@ -68,69 +54,23 @@
#include "prcm-common.h"
#include "prm.h"
#include "cm.h"
-
-/* OMAP2/3-common powerdomains and wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- */
-static struct pwrdm_dep gfx_sgx_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "iva2_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430: CM_SLEEPDEP_CAM: MPU
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- */
-static struct pwrdm_dep cam_gfx_sleepdeps[] = {
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
#include "powerdomains24xx.h"
#include "powerdomains34xx.h"
+#include "powerdomains44xx.h"
+/* OMAP2/3-common powerdomains */
-/*
- * OMAP2/3 common powerdomains
- */
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
/*
* The GFX powerdomain is not present on 3430ES2, but currently we do not
* have a macro to filter it out at compile-time.
*/
-static struct powerdomain gfx_pwrdm = {
+static struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
CHIP_IS_OMAP3430ES1),
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = cam_gfx_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
@@ -142,22 +82,24 @@
},
};
-static struct powerdomain wkup_pwrdm = {
+static struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
- .dep_bit = OMAP_EN_WKUP_SHIFT,
};
+#endif
/* As powerdomains are added or removed above, this list must also be changed */
static struct powerdomain *powerdomains_omap[] __initdata = {
- &gfx_pwrdm,
- &wkup_pwrdm,
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ &wkup_omap2_pwrdm,
+ &gfx_omap2_pwrdm,
+#endif
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
@@ -167,12 +109,12 @@
&mdm_pwrdm,
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
&iva2_pwrdm,
- &mpu_34xx_pwrdm,
+ &mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_34xx_pre_es3_1_pwrdm,
- &core_34xx_es3_1_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
@@ -186,6 +128,24 @@
&dpll5_pwrdm,
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ &core_44xx_pwrdm,
+ &gfx_44xx_pwrdm,
+ &abe_44xx_pwrdm,
+ &dss_44xx_pwrdm,
+ &tesla_44xx_pwrdm,
+ &wkup_44xx_pwrdm,
+ &cpu0_44xx_pwrdm,
+ &cpu1_44xx_pwrdm,
+ &emu_44xx_pwrdm,
+ &mpu_44xx_pwrdm,
+ &ivahd_44xx_pwrdm,
+ &cam_44xx_pwrdm,
+ &l3init_44xx_pwrdm,
+ &l4per_44xx_pwrdm,
+ &always_on_core_44xx_pwrdm,
+ &cefuse_44xx_pwrdm,
+#endif
NULL
};
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index bd249a4..775093a 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -2,7 +2,7 @@
* OMAP24XX powerdomain definitions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
* Debugging and integration fixes by Jouni Högander
@@ -30,83 +30,7 @@
/* 24XX powerdomains and dependencies */
-#ifdef CONFIG_ARCH_OMAP24XX
-
-
-/* Wakeup dependency source arrays */
-
-/*
- * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP
- * 2430 PM_WKDEP_MDM: same as above
- */
-static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct pwrdm_dep mpu_24xx_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "dsp_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "mdm_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct pwrdm_dep core_24xx_wkdeps[] = {
- {
- .pwrdm_name = "dsp_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "gfx_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .pwrdm_name = "mdm_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
+#ifdef CONFIG_ARCH_OMAP2
/* Powerdomains */
@@ -114,8 +38,6 @@
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_mdm_24xx_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
@@ -131,8 +53,6 @@
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
- .dep_bit = OMAP24XX_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_24xx_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -148,9 +68,7 @@
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
- .wkdep_srcs = core_24xx_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
.banks = 3,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
@@ -164,7 +82,7 @@
},
};
-#endif /* CONFIG_ARCH_OMAP24XX */
+#endif /* CONFIG_ARCH_OMAP2 */
@@ -176,13 +94,10 @@
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
-/* Another case of bit name collisions between several registers: EN_MDM */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = dsp_mdm_24xx_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 588f7e0..bd87112 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -1,8 +1,8 @@
/*
- * OMAP34XX powerdomain definitions
+ * OMAP3 powerdomain definitions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
*
* Written by Paul Walmsley
* Debugging and integration fixes by Jouni Högander
@@ -32,128 +32,7 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP34XX
-
-/*
- * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP
- * (USBHOST is ES2 only)
- */
-static struct pwrdm_dep per_usbhost_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "iva2_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER
- */
-static struct pwrdm_dep mpu_34xx_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "iva2_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "per_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER
- */
-static struct pwrdm_dep iva2_wkdeps[] = {
- {
- .pwrdm_name = "core_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "per_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */
-static struct pwrdm_dep cam_dss_wkdeps[] = {
- {
- .pwrdm_name = "iva2_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "wkup_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct pwrdm_dep neon_wkdeps[] = {
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */
-
-/*
- * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA
- * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA
- */
-static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = {
- {
- .pwrdm_name = "mpu_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .pwrdm_name = "iva2_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
+#ifdef CONFIG_ARCH_OMAP3
/*
* Powerdomains
@@ -163,8 +42,6 @@
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -182,12 +59,10 @@
},
};
-static struct powerdomain mpu_34xx_pwrdm = {
+static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_34xx_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -200,15 +75,14 @@
},
};
-/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
+static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
CHIP_IS_OMAP3430ES2 |
CHIP_IS_OMAP3430ES3_0),
.pwrsts = PWRSTS_OFF_RET_ON,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
@@ -220,13 +94,12 @@
},
};
-/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_es3_1_pwrdm = {
+static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
.pwrsts = PWRSTS_OFF_RET_ON,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
.banks = 2,
.pwrsts_mem_ret = {
@@ -239,14 +112,10 @@
},
};
-/* Another case of bit name collisions between several registers: EN_DSS */
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = cam_dss_wkdeps,
- .sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
@@ -267,8 +136,6 @@
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = cam_gfx_sleepdeps,
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
@@ -285,8 +152,6 @@
.name = "cam_pwrdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
- .wkdep_srcs = cam_dss_wkdeps,
- .sleepdep_srcs = cam_gfx_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
@@ -302,9 +167,6 @@
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_usbhost_wkdeps,
- .sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -326,7 +188,6 @@
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
- .wkdep_srcs = neon_wkdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
};
@@ -335,8 +196,6 @@
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
- .wkdep_srcs = per_usbhost_wkdeps,
- .sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
/*
@@ -386,7 +245,7 @@
};
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
#endif
diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx.h
new file mode 100644
index 0000000..c101514
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains44xx.h
@@ -0,0 +1,310 @@
+/*
+ * OMAP4 Power domains framework
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
+#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
+
+#include <plat/powerdomain.h>
+
+#include "prcm-common.h"
+#include "cm.h"
+#include "cm-regbits-44xx.h"
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+/* core_44xx_pwrdm: CORE power domain */
+static struct powerdomain core_44xx_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = OMAP4430_PRM_CORE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 5,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* core_nret_bank */
+ [1] = PWRSTS_OFF_RET, /* core_ocmram */
+ [2] = PWRDM_POWER_RET, /* core_other_bank */
+ [3] = PWRSTS_OFF_RET, /* ducati_l2ram */
+ [4] = PWRSTS_OFF_RET, /* ducati_unicache */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* core_nret_bank */
+ [1] = PWRSTS_OFF_RET, /* core_ocmram */
+ [2] = PWRDM_POWER_ON, /* core_other_bank */
+ [3] = PWRDM_POWER_ON, /* ducati_l2ram */
+ [4] = PWRDM_POWER_ON, /* ducati_unicache */
+ },
+};
+
+/* gfx_44xx_pwrdm: 3D accelerator power domain */
+static struct powerdomain gfx_44xx_pwrdm = {
+ .name = "gfx_pwrdm",
+ .prcm_offs = OMAP4430_PRM_GFX_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* gfx_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* gfx_mem */
+ },
+};
+
+/* abe_44xx_pwrdm: Audio back end power domain */
+static struct powerdomain abe_44xx_pwrdm = {
+ .name = "abe_pwrdm",
+ .prcm_offs = OMAP4430_PRM_ABE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_OFF,
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* aessmem */
+ [1] = PWRDM_POWER_OFF, /* periphmem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* aessmem */
+ [1] = PWRDM_POWER_ON, /* periphmem */
+ },
+};
+
+/* dss_44xx_pwrdm: Display subsystem power domain */
+static struct powerdomain dss_44xx_pwrdm = {
+ .name = "dss_pwrdm",
+ .prcm_offs = OMAP4430_PRM_DSS_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* dss_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* dss_mem */
+ },
+};
+
+/* tesla_44xx_pwrdm: Tesla processor power domain */
+static struct powerdomain tesla_44xx_pwrdm = {
+ .name = "tesla_pwrdm",
+ .prcm_offs = OMAP4430_PRM_TESLA_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 3,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_RET, /* tesla_edma */
+ [1] = PWRSTS_OFF_RET, /* tesla_l1 */
+ [2] = PWRSTS_OFF_RET, /* tesla_l2 */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* tesla_edma */
+ [1] = PWRDM_POWER_ON, /* tesla_l1 */
+ [2] = PWRDM_POWER_ON, /* tesla_l2 */
+ },
+};
+
+/* wkup_44xx_pwrdm: Wake-up power domain */
+static struct powerdomain wkup_44xx_pwrdm = {
+ .name = "wkup_pwrdm",
+ .prcm_offs = OMAP4430_PRM_WKUP_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRDM_POWER_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* wkup_bank */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* wkup_bank */
+ },
+};
+
+/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
+static struct powerdomain cpu0_44xx_pwrdm = {
+ .name = "cpu0_pwrdm",
+ .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* cpu0_l1 */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* cpu0_l1 */
+ },
+};
+
+/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
+static struct powerdomain cpu1_44xx_pwrdm = {
+ .name = "cpu1_pwrdm",
+ .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* cpu1_l1 */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* cpu1_l1 */
+ },
+};
+
+/* emu_44xx_pwrdm: Emulation power domain */
+static struct powerdomain emu_44xx_pwrdm = {
+ .name = "emu_pwrdm",
+ .prcm_offs = OMAP4430_PRM_EMU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* emu_bank */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* emu_bank */
+ },
+};
+
+/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
+static struct powerdomain mpu_44xx_pwrdm = {
+ .name = "mpu_pwrdm",
+ .prcm_offs = OMAP4430_PRM_MPU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 3,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* mpu_l1 */
+ [1] = PWRSTS_OFF_RET, /* mpu_l2 */
+ [2] = PWRDM_POWER_RET, /* mpu_ram */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* mpu_l1 */
+ [1] = PWRDM_POWER_ON, /* mpu_l2 */
+ [2] = PWRDM_POWER_ON, /* mpu_ram */
+ },
+};
+
+/* ivahd_44xx_pwrdm: IVA-HD power domain */
+static struct powerdomain ivahd_44xx_pwrdm = {
+ .name = "ivahd_pwrdm",
+ .prcm_offs = OMAP4430_PRM_IVAHD_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRDM_POWER_OFF,
+ .banks = 4,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* hwa_mem */
+ [1] = PWRSTS_OFF_RET, /* sl2_mem */
+ [2] = PWRSTS_OFF_RET, /* tcm1_mem */
+ [3] = PWRSTS_OFF_RET, /* tcm2_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* hwa_mem */
+ [1] = PWRDM_POWER_ON, /* sl2_mem */
+ [2] = PWRDM_POWER_ON, /* tcm1_mem */
+ [3] = PWRDM_POWER_ON, /* tcm2_mem */
+ },
+};
+
+/* cam_44xx_pwrdm: Camera subsystem power domain */
+static struct powerdomain cam_44xx_pwrdm = {
+ .name = "cam_pwrdm",
+ .prcm_offs = OMAP4430_PRM_CAM_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_ON,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* cam_mem */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* cam_mem */
+ },
+};
+
+/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
+static struct powerdomain l3init_44xx_pwrdm = {
+ .name = "l3init_pwrdm",
+ .prcm_offs = OMAP4430_PRM_L3INIT_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 1,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* l3init_bank1 */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* l3init_bank1 */
+ },
+};
+
+/* l4per_44xx_pwrdm: Target peripherals power domain */
+static struct powerdomain l4per_44xx_pwrdm = {
+ .name = "l4per_pwrdm",
+ .prcm_offs = OMAP4430_PRM_L4PER_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRDM_POWER_OFF, /* nonretained_bank */
+ [1] = PWRDM_POWER_RET, /* retained_bank */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRDM_POWER_ON, /* nonretained_bank */
+ [1] = PWRDM_POWER_ON, /* retained_bank */
+ },
+};
+
+/*
+ * always_on_core_44xx_pwrdm: Always ON logic that sits in VDD_CORE voltage
+ * domain
+ */
+static struct powerdomain always_on_core_44xx_pwrdm = {
+ .name = "always_on_core_pwrdm",
+ .prcm_offs = OMAP4430_PRM_ALWAYS_ON_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRDM_POWER_ON,
+};
+
+/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
+static struct powerdomain cefuse_44xx_pwrdm = {
+ .name = "cefuse_pwrdm",
+ .prcm_offs = OMAP4430_PRM_CEFUSE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+/*
+ * The following power domains are not under SW control
+ *
+ * always_on_iva
+ * always_on_mpu
+ * stdefuse
+ */
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 61ac2a4..90f603d 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -119,6 +119,15 @@
#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400
#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800
+/* Base Addresses for the OMAP4 */
+
+#define OMAP4430_CM1_BASE 0x4a004000
+#define OMAP4430_CM2_BASE 0x4a008000
+#define OMAP4430_PRM_BASE 0x4a306000
+#define OMAP4430_SCRM_BASE 0x4a30a000
+#define OMAP4430_CHIRONSS_BASE 0x48243000
+
+
/* 24XX register bits shared between CM & PRM registers */
/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index cf466ea..81872aa 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -11,6 +11,7 @@
* Rajendra Nayak <rnayak@ti.com>
*
* Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
+ * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -28,6 +29,7 @@
#include <plat/control.h>
#include "clock.h"
+#include "clock2xxx.h"
#include "cm.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
@@ -121,19 +123,25 @@
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
- return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
+ if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
+ if (cpu_is_omap44xx())
+ return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
+
+ return 0;
}
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_arch_reset(char mode)
{
- s16 prcm_offs;
- omap2_clk_prepare_for_reboot();
+ s16 prcm_offs = 0;
- if (cpu_is_omap24xx())
+ if (cpu_is_omap24xx()) {
+ omap2xxx_clk_prepare_for_reboot();
+
prcm_offs = WKUP_MOD;
- else if (cpu_is_omap34xx()) {
+ } else if (cpu_is_omap34xx()) {
u32 l;
prcm_offs = OMAP3430_GR_MOD;
@@ -144,10 +152,17 @@
* cf. OMAP34xx TRM, Initialization / Software Booting
* Configuration. */
omap_writel(l, OMAP343X_SCRATCHPAD + 4);
- } else
+ } else if (cpu_is_omap44xx())
+ prcm_offs = OMAP4430_PRM_DEVICE_MOD;
+ else
WARN_ON(1);
- prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+ if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+ OMAP2_RM_RSTCTRL);
+ if (cpu_is_omap44xx())
+ prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+ OMAP4_RM_RSTCTRL);
}
static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
@@ -188,6 +203,18 @@
return v;
}
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
/* Read a register in a CM module */
u32 cm_read_mod_reg(s16 module, u16 idx)
{
@@ -217,26 +244,22 @@
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
* @reg: physical address of module IDLEST register
* @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
* @name: name of the clock (for printk)
*
* Returns 1 if the module indicated readiness in time, or 0 if it
* failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
*/
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name)
{
int i = 0;
int ena = 0;
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- */
- if (cpu_is_omap24xx())
- ena = mask;
- else if (cpu_is_omap34xx())
+ if (idlest)
ena = 0;
else
- BUG();
+ ena = mask;
/* Wait for lock */
omap_test_timeout(((__raw_readl(reg) & mask) == ena),
@@ -254,9 +277,19 @@
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
- prm_base = omap2_globals->prm;
- cm_base = omap2_globals->cm;
- cm2_base = omap2_globals->cm2;
+ /* Static mapping, never released */
+ if (omap2_globals->prm) {
+ prm_base = ioremap(omap2_globals->prm, SZ_8K);
+ WARN_ON(!prm_base);
+ }
+ if (omap2_globals->cm) {
+ cm_base = ioremap(omap2_globals->cm, SZ_8K);
+ WARN_ON(!cm_base);
+ }
+ if (omap2_globals->cm2) {
+ cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
+ WARN_ON(!cm2_base);
+ }
}
#ifdef CONFIG_ARCH_OMAP3
@@ -280,7 +313,7 @@
prcm_context.emu_cm_clksel =
cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
prcm_context.emu_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.pll_cm_autoidle2 =
cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
prcm_context.pll_cm_clksel4 =
@@ -333,23 +366,25 @@
prcm_context.mpu_cm_autoidle2 =
cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
prcm_context.iva2_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.mpu_cm_clkstctrl =
- cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.core_cm_clkstctrl =
- cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.sgx_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ OMAP2_CM_CLKSTCTRL);
prcm_context.dss_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.cam_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.per_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.neon_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
prcm_context.usbhost_cm_clkstctrl =
- cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+ cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ OMAP2_CM_CLKSTCTRL);
prcm_context.core_cm_autoidle1 =
cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
prcm_context.core_cm_autoidle2 =
@@ -432,7 +467,7 @@
cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
CM_CLKSEL1);
cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
@@ -478,22 +513,23 @@
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
- CM_CLKSTCTRL);
- cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
+ cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD,
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
- CM_CLKSTCTRL);
+ OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
- OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+ OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
CM_AUTOIDLE1);
cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 301c810..597be4a 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -29,412 +29,412 @@
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT (1 << 1)
+#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT 1
#define OMAP4430_ABBOFF_ACT_EXPORT_MASK BITFIELD(1, 1)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT (1 << 2)
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT 2
#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK BITFIELD(2, 2)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_ABB_IVA_DONE_EN_SHIFT (1 << 31)
+#define OMAP4430_ABB_IVA_DONE_EN_SHIFT 31
#define OMAP4430_ABB_IVA_DONE_EN_MASK BITFIELD(31, 31)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_ABB_IVA_DONE_ST_SHIFT (1 << 31)
+#define OMAP4430_ABB_IVA_DONE_ST_SHIFT 31
#define OMAP4430_ABB_IVA_DONE_ST_MASK BITFIELD(31, 31)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_EN_SHIFT (1 << 7)
+#define OMAP4430_ABB_MPU_DONE_EN_SHIFT 7
#define OMAP4430_ABB_MPU_DONE_EN_MASK BITFIELD(7, 7)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_ST_SHIFT (1 << 7)
+#define OMAP4430_ABB_MPU_DONE_ST_SHIFT 7
#define OMAP4430_ABB_MPU_DONE_ST_MASK BITFIELD(7, 7)
/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_FBB_SEL_SHIFT (1 << 2)
+#define OMAP4430_ACTIVE_FBB_SEL_SHIFT 2
#define OMAP4430_ACTIVE_FBB_SEL_MASK BITFIELD(2, 2)
/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_RBB_SEL_SHIFT (1 << 1)
+#define OMAP4430_ACTIVE_RBB_SEL_SHIFT 1
#define OMAP4430_ACTIVE_RBB_SEL_MASK BITFIELD(1, 1)
/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_AESSMEM_ONSTATE_SHIFT 16
#define OMAP4430_AESSMEM_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_AESSMEM_RETSTATE_SHIFT 8
#define OMAP4430_AESSMEM_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_AESSMEM_STATEST_SHIFT (1 << 4)
+#define OMAP4430_AESSMEM_STATEST_SHIFT 4
#define OMAP4430_AESSMEM_STATEST_MASK BITFIELD(4, 5)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_AIPOFF_SHIFT (1 << 8)
+#define OMAP4430_AIPOFF_SHIFT 8
#define OMAP4430_AIPOFF_MASK BITFIELD(8, 8)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT (1 << 0)
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT 0
#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK BITFIELD(0, 1)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT (1 << 4)
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT 4
#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK BITFIELD(4, 5)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT (1 << 2)
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT 2
#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK BITFIELD(2, 3)
/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP4430_CAM_MEM_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_CAM_MEM_ONSTATE_SHIFT 16
#define OMAP4430_CAM_MEM_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_CAM_PWRSTST */
-#define OMAP4430_CAM_MEM_STATEST_SHIFT (1 << 4)
+#define OMAP4430_CAM_MEM_STATEST_SHIFT 4
#define OMAP4430_CAM_MEM_STATEST_MASK BITFIELD(4, 5)
/* Used by PRM_CLKREQCTRL */
-#define OMAP4430_CLKREQ_COND_SHIFT (1 << 0)
+#define OMAP4430_CLKREQ_COND_SHIFT 0
#define OMAP4430_CLKREQ_COND_MASK BITFIELD(0, 2)
/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT (1 << 0)
+#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT 0
#define OMAP4430_CMDRA_VDD_CORE_L_MASK BITFIELD(0, 7)
/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT (1 << 8)
+#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT 8
#define OMAP4430_CMDRA_VDD_IVA_L_MASK BITFIELD(8, 15)
/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT (1 << 16)
+#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT 16
#define OMAP4430_CMDRA_VDD_MPU_L_MASK BITFIELD(16, 23)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_CORE_L_SHIFT (1 << 4)
+#define OMAP4430_CMD_VDD_CORE_L_SHIFT 4
#define OMAP4430_CMD_VDD_CORE_L_MASK BITFIELD(4, 4)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_IVA_L_SHIFT (1 << 12)
+#define OMAP4430_CMD_VDD_IVA_L_SHIFT 12
#define OMAP4430_CMD_VDD_IVA_L_MASK BITFIELD(12, 12)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_MPU_L_SHIFT (1 << 17)
+#define OMAP4430_CMD_VDD_MPU_L_SHIFT 17
#define OMAP4430_CMD_VDD_MPU_L_MASK BITFIELD(17, 17)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT (1 << 18)
+#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT 18
#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK BITFIELD(18, 19)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT (1 << 9)
+#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT 9
#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK BITFIELD(9, 9)
/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT (1 << 6)
+#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT 6
#define OMAP4430_CORE_OCMRAM_STATEST_MASK BITFIELD(6, 7)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT 16
#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT 8
#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT (1 << 4)
+#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT 4
#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK BITFIELD(4, 5)
/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_DATA_SHIFT (1 << 16)
+#define OMAP4430_DATA_SHIFT 16
#define OMAP4430_DATA_MASK BITFIELD(16, 23)
/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT (1 << 0)
+#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT 0
#define OMAP4430_DEVICE_OFF_ENABLE_MASK BITFIELD(0, 0)
/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_DFILTEREN_SHIFT (1 << 6)
+#define OMAP4430_DFILTEREN_SHIFT 6
#define OMAP4430_DFILTEREN_MASK BITFIELD(6, 6)
/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT (1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT 4
#define OMAP4430_DPLL_ABE_RECAL_EN_MASK BITFIELD(4, 4)
/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT (1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT 4
#define OMAP4430_DPLL_ABE_RECAL_ST_MASK BITFIELD(4, 4)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT (1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT 0
#define OMAP4430_DPLL_CORE_RECAL_EN_MASK BITFIELD(0, 0)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT (1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT 0
#define OMAP4430_DPLL_CORE_RECAL_ST_MASK BITFIELD(0, 0)
/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT (1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT 6
#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK BITFIELD(6, 6)
/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT (1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT 6
#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK BITFIELD(6, 6)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT (1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT 2
#define OMAP4430_DPLL_IVA_RECAL_EN_MASK BITFIELD(2, 2)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT (1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT 2
#define OMAP4430_DPLL_IVA_RECAL_ST_MASK BITFIELD(2, 2)
/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT (1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT 1
#define OMAP4430_DPLL_MPU_RECAL_EN_MASK BITFIELD(1, 1)
/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT (1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT 1
#define OMAP4430_DPLL_MPU_RECAL_ST_MASK BITFIELD(1, 1)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT (1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT 3
#define OMAP4430_DPLL_PER_RECAL_EN_MASK BITFIELD(3, 3)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT (1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT 3
#define OMAP4430_DPLL_PER_RECAL_ST_MASK BITFIELD(3, 3)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT (1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT 7
#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK BITFIELD(7, 7)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT (1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT 7
#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK BITFIELD(7, 7)
/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT (1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT 5
#define OMAP4430_DPLL_USB_RECAL_EN_MASK BITFIELD(5, 5)
/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT (1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT 5
#define OMAP4430_DPLL_USB_RECAL_ST_MASK BITFIELD(5, 5)
/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_DSS_MEM_ONSTATE_SHIFT 16
#define OMAP4430_DSS_MEM_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_DSS_MEM_RETSTATE_SHIFT 8
#define OMAP4430_DSS_MEM_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_DSS_PWRSTST */
-#define OMAP4430_DSS_MEM_STATEST_SHIFT (1 << 4)
+#define OMAP4430_DSS_MEM_STATEST_SHIFT 4
#define OMAP4430_DSS_MEM_STATEST_MASK BITFIELD(4, 5)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT (1 << 20)
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT 20
#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK BITFIELD(20, 21)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT (1 << 10)
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT 10
#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK BITFIELD(10, 10)
/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT (1 << 8)
+#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT 8
#define OMAP4430_DUCATI_L2RAM_STATEST_MASK BITFIELD(8, 9)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT (1 << 22)
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT 22
#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK BITFIELD(22, 23)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT (1 << 11)
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT 11
#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK BITFIELD(11, 11)
/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT (1 << 10)
+#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT 10
#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK BITFIELD(10, 11)
/* Used by RM_MPU_RSTST */
-#define OMAP4430_EMULATION_RST_SHIFT (1 << 0)
+#define OMAP4430_EMULATION_RST_SHIFT 0
#define OMAP4430_EMULATION_RST_MASK BITFIELD(0, 0)
/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST1ST_SHIFT (1 << 3)
+#define OMAP4430_EMULATION_RST1ST_SHIFT 3
#define OMAP4430_EMULATION_RST1ST_MASK BITFIELD(3, 3)
/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST2ST_SHIFT (1 << 4)
+#define OMAP4430_EMULATION_RST2ST_SHIFT 4
#define OMAP4430_EMULATION_RST2ST_MASK BITFIELD(4, 4)
/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT (1 << 3)
+#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT 3
#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK BITFIELD(3, 3)
/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT (1 << 4)
+#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT 4
#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK BITFIELD(4, 4)
/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP4430_EMU_BANK_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_EMU_BANK_ONSTATE_SHIFT 16
#define OMAP4430_EMU_BANK_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_EMU_PWRSTST */
-#define OMAP4430_EMU_BANK_STATEST_SHIFT (1 << 4)
+#define OMAP4430_EMU_BANK_STATEST_SHIFT 4
#define OMAP4430_EMU_BANK_STATEST_MASK BITFIELD(4, 5)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
*/
-#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT (1 << 0)
+#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT 0
#define OMAP4430_ENABLE_RTA_EXPORT_MASK BITFIELD(0, 0)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ENFUNC1_SHIFT (1 << 3)
+#define OMAP4430_ENFUNC1_SHIFT 3
#define OMAP4430_ENFUNC1_MASK BITFIELD(3, 3)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ENFUNC3_SHIFT (1 << 5)
+#define OMAP4430_ENFUNC3_SHIFT 5
#define OMAP4430_ENFUNC3_MASK BITFIELD(5, 5)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ENFUNC4_SHIFT (1 << 6)
+#define OMAP4430_ENFUNC4_SHIFT 6
#define OMAP4430_ENFUNC4_MASK BITFIELD(6, 6)
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
* PRM_LDO_SRAM_MPU_SETUP
*/
-#define OMAP4430_ENFUNC5_SHIFT (1 << 7)
+#define OMAP4430_ENFUNC5_SHIFT 7
#define OMAP4430_ENFUNC5_MASK BITFIELD(7, 7)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERRORGAIN_SHIFT (1 << 16)
+#define OMAP4430_ERRORGAIN_SHIFT 16
#define OMAP4430_ERRORGAIN_MASK BITFIELD(16, 23)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERROROFFSET_SHIFT (1 << 24)
+#define OMAP4430_ERROROFFSET_SHIFT 24
#define OMAP4430_ERROROFFSET_MASK BITFIELD(24, 31)
/* Used by PRM_RSTST */
-#define OMAP4430_EXTERNAL_WARM_RST_SHIFT (1 << 5)
+#define OMAP4430_EXTERNAL_WARM_RST_SHIFT 5
#define OMAP4430_EXTERNAL_WARM_RST_MASK BITFIELD(5, 5)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_FORCEUPDATE_SHIFT (1 << 1)
+#define OMAP4430_FORCEUPDATE_SHIFT 1
#define OMAP4430_FORCEUPDATE_MASK BITFIELD(1, 1)
/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_FORCEUPDATEWAIT_SHIFT (1 << 8)
+#define OMAP4430_FORCEUPDATEWAIT_SHIFT 8
#define OMAP4430_FORCEUPDATEWAIT_MASK BITFIELD(8, 31)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
-#define OMAP4430_FORCEWKUP_EN_SHIFT (1 << 10)
+#define OMAP4430_FORCEWKUP_EN_SHIFT 10
#define OMAP4430_FORCEWKUP_EN_MASK BITFIELD(10, 10)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_FORCEWKUP_ST_SHIFT (1 << 10)
+#define OMAP4430_FORCEWKUP_ST_SHIFT 10
#define OMAP4430_FORCEWKUP_ST_MASK BITFIELD(10, 10)
/* Used by PM_GFX_PWRSTCTRL */
-#define OMAP4430_GFX_MEM_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_GFX_MEM_ONSTATE_SHIFT 16
#define OMAP4430_GFX_MEM_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_GFX_PWRSTST */
-#define OMAP4430_GFX_MEM_STATEST_SHIFT (1 << 4)
+#define OMAP4430_GFX_MEM_STATEST_SHIFT 4
#define OMAP4430_GFX_MEM_STATEST_MASK BITFIELD(4, 5)
/* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_COLD_RST_SHIFT (1 << 0)
+#define OMAP4430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP4430_GLOBAL_COLD_RST_MASK BITFIELD(0, 0)
/* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT (1 << 1)
+#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WARM_SW_RST_MASK BITFIELD(1, 1)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_GLOBAL_WUEN_SHIFT (1 << 16)
+#define OMAP4430_GLOBAL_WUEN_SHIFT 16
#define OMAP4430_GLOBAL_WUEN_MASK BITFIELD(16, 16)
/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMCODE_SHIFT (1 << 0)
+#define OMAP4430_HSMCODE_SHIFT 0
#define OMAP4430_HSMCODE_MASK BITFIELD(0, 2)
/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMODEEN_SHIFT (1 << 3)
+#define OMAP4430_HSMODEEN_SHIFT 3
#define OMAP4430_HSMODEEN_MASK BITFIELD(3, 3)
/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLH_SHIFT (1 << 16)
+#define OMAP4430_HSSCLH_SHIFT 16
#define OMAP4430_HSSCLH_MASK BITFIELD(16, 23)
/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLL_SHIFT (1 << 24)
+#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_HSSCLL_MASK BITFIELD(24, 31)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_HWA_MEM_ONSTATE_SHIFT 16
#define OMAP4430_HWA_MEM_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_HWA_MEM_RETSTATE_SHIFT 8
#define OMAP4430_HWA_MEM_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_HWA_MEM_STATEST_SHIFT (1 << 4)
+#define OMAP4430_HWA_MEM_STATEST_SHIFT 4
#define OMAP4430_HWA_MEM_STATEST_MASK BITFIELD(4, 5)
/* Used by RM_MPU_RSTST */
-#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT (1 << 1)
+#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT 1
#define OMAP4430_ICECRUSHER_MPU_RST_MASK BITFIELD(1, 1)
/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST1ST_SHIFT (1 << 5)
+#define OMAP4430_ICECRUSHER_RST1ST_SHIFT 5
#define OMAP4430_ICECRUSHER_RST1ST_MASK BITFIELD(5, 5)
/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST2ST_SHIFT (1 << 6)
+#define OMAP4430_ICECRUSHER_RST2ST_SHIFT 6
#define OMAP4430_ICECRUSHER_RST2ST_MASK BITFIELD(6, 6)
/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT (1 << 5)
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT 5
#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK BITFIELD(5, 5)
/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT (1 << 6)
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT 6
#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK BITFIELD(6, 6)
/* Used by PRM_RSTST */
-#define OMAP4430_ICEPICK_RST_SHIFT (1 << 9)
+#define OMAP4430_ICEPICK_RST_SHIFT 9
#define OMAP4430_ICEPICK_RST_MASK BITFIELD(9, 9)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVDD_SHIFT (1 << 2)
+#define OMAP4430_INITVDD_SHIFT 2
#define OMAP4430_INITVDD_MASK BITFIELD(2, 2)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVOLTAGE_SHIFT (1 << 8)
+#define OMAP4430_INITVOLTAGE_SHIFT 8
#define OMAP4430_INITVOLTAGE_MASK BITFIELD(8, 15)
/*
@@ -442,47 +442,47 @@
* PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
* PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
*/
-#define OMAP4430_INTRANSITION_SHIFT (1 << 20)
+#define OMAP4430_INTRANSITION_SHIFT 20
#define OMAP4430_INTRANSITION_MASK BITFIELD(20, 20)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_IO_EN_SHIFT (1 << 9)
+#define OMAP4430_IO_EN_SHIFT 9
#define OMAP4430_IO_EN_MASK BITFIELD(9, 9)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_IO_ON_STATUS_SHIFT (1 << 5)
+#define OMAP4430_IO_ON_STATUS_SHIFT 5
#define OMAP4430_IO_ON_STATUS_MASK BITFIELD(5, 5)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_IO_ST_SHIFT (1 << 9)
+#define OMAP4430_IO_ST_SHIFT 9
#define OMAP4430_IO_ST_MASK BITFIELD(9, 9)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_OVERRIDE_SHIFT (1 << 0)
+#define OMAP4430_ISOCLK_OVERRIDE_SHIFT 0
#define OMAP4430_ISOCLK_OVERRIDE_MASK BITFIELD(0, 0)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_STATUS_SHIFT (1 << 1)
+#define OMAP4430_ISOCLK_STATUS_SHIFT 1
#define OMAP4430_ISOCLK_STATUS_MASK BITFIELD(1, 1)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOOVR_EXTEND_SHIFT (1 << 4)
+#define OMAP4430_ISOOVR_EXTEND_SHIFT 4
#define OMAP4430_ISOOVR_EXTEND_MASK BITFIELD(4, 4)
/* Used by PRM_IO_COUNT */
-#define OMAP4430_ISO_2_ON_TIME_SHIFT (1 << 0)
+#define OMAP4430_ISO_2_ON_TIME_SHIFT 0
#define OMAP4430_ISO_2_ON_TIME_MASK BITFIELD(0, 7)
/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT 16
#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT 8
#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_L3INIT_PWRSTST */
-#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT (1 << 4)
+#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT 4
#define OMAP4430_L3INIT_BANK1_STATEST_MASK BITFIELD(4, 5)
/*
@@ -490,7 +490,7 @@
* PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL,
* PM_IVAHD_PWRSTCTRL
*/
-#define OMAP4430_LOGICRETSTATE_SHIFT (1 << 2)
+#define OMAP4430_LOGICRETSTATE_SHIFT 2
#define OMAP4430_LOGICRETSTATE_MASK BITFIELD(2, 2)
/*
@@ -498,7 +498,7 @@
* PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
* PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
*/
-#define OMAP4430_LOGICSTATEST_SHIFT (1 << 2)
+#define OMAP4430_LOGICSTATEST_SHIFT 2
#define OMAP4430_LOGICSTATEST_MASK BITFIELD(2, 2)
/*
@@ -537,7 +537,7 @@
* RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT,
* RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT
*/
-#define OMAP4430_LOSTCONTEXT_DFF_SHIFT (1 << 0)
+#define OMAP4430_LOSTCONTEXT_DFF_SHIFT 0
#define OMAP4430_LOSTCONTEXT_DFF_MASK BITFIELD(0, 0)
/*
@@ -558,58 +558,58 @@
* RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT,
* RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT
*/
-#define OMAP4430_LOSTCONTEXT_RFF_SHIFT (1 << 1)
+#define OMAP4430_LOSTCONTEXT_RFF_SHIFT 1
#define OMAP4430_LOSTCONTEXT_RFF_MASK BITFIELD(1, 1)
/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP4430_LOSTMEM_AESSMEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_AESSMEM_SHIFT 8
#define OMAP4430_LOSTMEM_AESSMEM_MASK BITFIELD(8, 8)
/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT 8
#define OMAP4430_LOSTMEM_CAM_MEM_MASK BITFIELD(8, 8)
/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK BITFIELD(8, 8)
/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT (1 << 9)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT 9
#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK BITFIELD(9, 9)
/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT 8
#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK BITFIELD(8, 8)
/*
* Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
* RM_SDMA_SDMA_CONTEXT
*/
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK BITFIELD(8, 8)
/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT 8
#define OMAP4430_LOSTMEM_DSS_MEM_MASK BITFIELD(8, 8)
/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT (1 << 9)
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT 9
#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK BITFIELD(9, 9)
/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT 8
#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK BITFIELD(8, 8)
/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_EMU_BANK_MASK BITFIELD(8, 8)
/* Used by RM_GFX_GFX_CONTEXT */
-#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT 8
#define OMAP4430_LOSTMEM_GFX_MEM_MASK BITFIELD(8, 8)
/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT (1 << 10)
+#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT 10
#define OMAP4430_LOSTMEM_HWA_MEM_MASK BITFIELD(10, 10)
/*
@@ -619,19 +619,19 @@
* RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
* RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
*/
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT 8
#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK BITFIELD(8, 8)
/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L1_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_MPU_L1_SHIFT 8
#define OMAP4430_LOSTMEM_MPU_L1_MASK BITFIELD(8, 8)
/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L2_SHIFT (1 << 9)
+#define OMAP4430_LOSTMEM_MPU_L2_SHIFT 9
#define OMAP4430_LOSTMEM_MPU_L2_MASK BITFIELD(9, 9)
/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT (1 << 10)
+#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT 10
#define OMAP4430_LOSTMEM_MPU_RAM_MASK BITFIELD(10, 10)
/*
@@ -639,14 +639,14 @@
* RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
* RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
*/
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK BITFIELD(8, 8)
/*
* Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
* RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
*/
-#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT 8
#define OMAP4430_LOSTMEM_PERIHPMEM_MASK BITFIELD(8, 8)
/*
@@ -654,35 +654,35 @@
* RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
* RM_L4SEC_CRYPTODMA_CONTEXT
*/
-#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK BITFIELD(8, 8)
/* Used by RM_IVAHD_SL2_CONTEXT */
-#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT 8
#define OMAP4430_LOSTMEM_SL2_MEM_MASK BITFIELD(8, 8)
/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT 8
#define OMAP4430_LOSTMEM_TCM1_MEM_MASK BITFIELD(8, 8)
/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT (1 << 9)
+#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT 9
#define OMAP4430_LOSTMEM_TCM2_MEM_MASK BITFIELD(9, 9)
/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT (1 << 10)
+#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT 10
#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK BITFIELD(10, 10)
/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT 8
#define OMAP4430_LOSTMEM_TESLA_L1_MASK BITFIELD(8, 8)
/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT (1 << 9)
+#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT 9
#define OMAP4430_LOSTMEM_TESLA_L2_MASK BITFIELD(9, 9)
/* Used by RM_WKUP_SARRAM_CONTEXT */
-#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT (1 << 8)
+#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT 8
#define OMAP4430_LOSTMEM_WKUP_BANK_MASK BITFIELD(8, 8)
/*
@@ -690,164 +690,164 @@
* PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
* PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
*/
-#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT (1 << 4)
+#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT 4
#define OMAP4430_LOWPOWERSTATECHANGE_MASK BITFIELD(4, 4)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_MEMORYCHANGE_SHIFT (1 << 3)
+#define OMAP4430_MEMORYCHANGE_SHIFT 3
#define OMAP4430_MEMORYCHANGE_MASK BITFIELD(3, 3)
/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_READY_SHIFT (1 << 1)
+#define OMAP4430_MODEM_READY_SHIFT 1
#define OMAP4430_MODEM_READY_MASK BITFIELD(1, 1)
/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT (1 << 9)
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT 9
#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK BITFIELD(9, 9)
/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SLEEP_ST_SHIFT (1 << 16)
+#define OMAP4430_MODEM_SLEEP_ST_SHIFT 16
#define OMAP4430_MODEM_SLEEP_ST_MASK BITFIELD(16, 16)
/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_WAKE_IRQ_SHIFT (1 << 8)
+#define OMAP4430_MODEM_WAKE_IRQ_SHIFT 8
#define OMAP4430_MODEM_WAKE_IRQ_MASK BITFIELD(8, 8)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_MPU_L1_ONSTATE_SHIFT 16
#define OMAP4430_MPU_L1_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_MPU_L1_RETSTATE_SHIFT 8
#define OMAP4430_MPU_L1_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L1_STATEST_SHIFT (1 << 4)
+#define OMAP4430_MPU_L1_STATEST_SHIFT 4
#define OMAP4430_MPU_L1_STATEST_MASK BITFIELD(4, 5)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_ONSTATE_SHIFT (1 << 18)
+#define OMAP4430_MPU_L2_ONSTATE_SHIFT 18
#define OMAP4430_MPU_L2_ONSTATE_MASK BITFIELD(18, 19)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_RETSTATE_SHIFT (1 << 9)
+#define OMAP4430_MPU_L2_RETSTATE_SHIFT 9
#define OMAP4430_MPU_L2_RETSTATE_MASK BITFIELD(9, 9)
/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L2_STATEST_SHIFT (1 << 6)
+#define OMAP4430_MPU_L2_STATEST_SHIFT 6
#define OMAP4430_MPU_L2_STATEST_MASK BITFIELD(6, 7)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_ONSTATE_SHIFT (1 << 20)
+#define OMAP4430_MPU_RAM_ONSTATE_SHIFT 20
#define OMAP4430_MPU_RAM_ONSTATE_MASK BITFIELD(20, 21)
/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_RETSTATE_SHIFT (1 << 10)
+#define OMAP4430_MPU_RAM_RETSTATE_SHIFT 10
#define OMAP4430_MPU_RAM_RETSTATE_MASK BITFIELD(10, 10)
/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_RAM_STATEST_SHIFT (1 << 8)
+#define OMAP4430_MPU_RAM_STATEST_SHIFT 8
#define OMAP4430_MPU_RAM_STATEST_MASK BITFIELD(8, 9)
/* Used by PRM_RSTST */
-#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT (1 << 2)
+#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT 2
#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK BITFIELD(2, 2)
/* Used by PRM_RSTST */
-#define OMAP4430_MPU_WDT_RST_SHIFT (1 << 3)
+#define OMAP4430_MPU_WDT_RST_SHIFT 3
#define OMAP4430_MPU_WDT_RST_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT (1 << 18)
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT 18
#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK BITFIELD(18, 19)
/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT (1 << 9)
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT 9
#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK BITFIELD(9, 9)
/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT (1 << 6)
+#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT 6
#define OMAP4430_NONRETAINED_BANK_STATEST_MASK BITFIELD(6, 7)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT (1 << 24)
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT 24
#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK BITFIELD(24, 25)
/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT (1 << 12)
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT 12
#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK BITFIELD(12, 12)
/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT (1 << 12)
+#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT 12
#define OMAP4430_OCP_NRET_BANK_STATEST_MASK BITFIELD(12, 13)
/*
* Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
* PRM_VC_VAL_CMD_VDD_MPU_L
*/
-#define OMAP4430_OFF_SHIFT (1 << 0)
+#define OMAP4430_OFF_SHIFT 0
#define OMAP4430_OFF_MASK BITFIELD(0, 7)
/* Used by PRM_LDO_BANDGAP_CTRL */
-#define OMAP4430_OFF_ENABLE_SHIFT (1 << 0)
+#define OMAP4430_OFF_ENABLE_SHIFT 0
#define OMAP4430_OFF_ENABLE_MASK BITFIELD(0, 0)
/*
* Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
* PRM_VC_VAL_CMD_VDD_MPU_L
*/
-#define OMAP4430_ON_SHIFT (1 << 24)
+#define OMAP4430_ON_SHIFT 24
#define OMAP4430_ON_MASK BITFIELD(24, 31)
/*
* Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
* PRM_VC_VAL_CMD_VDD_MPU_L
*/
-#define OMAP4430_ONLP_SHIFT (1 << 16)
+#define OMAP4430_ONLP_SHIFT 16
#define OMAP4430_ONLP_MASK BITFIELD(16, 23)
/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_CHANGE_SHIFT (1 << 2)
+#define OMAP4430_OPP_CHANGE_SHIFT 2
#define OMAP4430_OPP_CHANGE_MASK BITFIELD(2, 2)
/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_SEL_SHIFT (1 << 0)
+#define OMAP4430_OPP_SEL_SHIFT 0
#define OMAP4430_OPP_SEL_MASK BITFIELD(0, 1)
/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_PCHARGECNT_VALUE_SHIFT (1 << 0)
+#define OMAP4430_PCHARGECNT_VALUE_SHIFT 0
#define OMAP4430_PCHARGECNT_VALUE_MASK BITFIELD(0, 5)
/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PCHARGE_TIME_SHIFT (1 << 0)
+#define OMAP4430_PCHARGE_TIME_SHIFT 0
#define OMAP4430_PCHARGE_TIME_MASK BITFIELD(0, 7)
/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT (1 << 20)
+#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT 20
#define OMAP4430_PERIPHMEM_ONSTATE_MASK BITFIELD(20, 21)
/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT (1 << 10)
+#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT 10
#define OMAP4430_PERIPHMEM_RETSTATE_MASK BITFIELD(10, 10)
/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_PERIPHMEM_STATEST_SHIFT (1 << 8)
+#define OMAP4430_PERIPHMEM_STATEST_SHIFT 8
#define OMAP4430_PERIPHMEM_STATEST_MASK BITFIELD(8, 9)
/* Used by PRM_PHASE1_CNDP */
-#define OMAP4430_PHASE1_CNDP_SHIFT (1 << 0)
+#define OMAP4430_PHASE1_CNDP_SHIFT 0
#define OMAP4430_PHASE1_CNDP_MASK BITFIELD(0, 31)
/* Used by PRM_PHASE2A_CNDP */
-#define OMAP4430_PHASE2A_CNDP_SHIFT (1 << 0)
+#define OMAP4430_PHASE2A_CNDP_SHIFT 0
#define OMAP4430_PHASE2A_CNDP_MASK BITFIELD(0, 31)
/* Used by PRM_PHASE2B_CNDP */
-#define OMAP4430_PHASE2B_CNDP_SHIFT (1 << 0)
+#define OMAP4430_PHASE2B_CNDP_SHIFT 0
#define OMAP4430_PHASE2B_CNDP_MASK BITFIELD(0, 31)
/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT (1 << 8)
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT 8
#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK BITFIELD(8, 15)
/*
@@ -856,7 +856,7 @@
* PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
* PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
*/
-#define OMAP4430_POWERSTATE_SHIFT (1 << 0)
+#define OMAP4430_POWERSTATE_SHIFT 0
#define OMAP4430_POWERSTATE_MASK BITFIELD(0, 1)
/*
@@ -864,35 +864,35 @@
* PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
* PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
*/
-#define OMAP4430_POWERSTATEST_SHIFT (1 << 0)
+#define OMAP4430_POWERSTATEST_SHIFT 0
#define OMAP4430_POWERSTATEST_MASK BITFIELD(0, 1)
/* Used by PRM_PWRREQCTRL */
-#define OMAP4430_PWRREQ_COND_SHIFT (1 << 0)
+#define OMAP4430_PWRREQ_COND_SHIFT 0
#define OMAP4430_PWRREQ_COND_MASK BITFIELD(0, 1)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_CORE_L_SHIFT (1 << 3)
+#define OMAP4430_RACEN_VDD_CORE_L_SHIFT 3
#define OMAP4430_RACEN_VDD_CORE_L_MASK BITFIELD(3, 3)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_IVA_L_SHIFT (1 << 11)
+#define OMAP4430_RACEN_VDD_IVA_L_SHIFT 11
#define OMAP4430_RACEN_VDD_IVA_L_MASK BITFIELD(11, 11)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_MPU_L_SHIFT (1 << 20)
+#define OMAP4430_RACEN_VDD_MPU_L_SHIFT 20
#define OMAP4430_RACEN_VDD_MPU_L_MASK BITFIELD(20, 20)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_CORE_L_SHIFT (1 << 2)
+#define OMAP4430_RAC_VDD_CORE_L_SHIFT 2
#define OMAP4430_RAC_VDD_CORE_L_MASK BITFIELD(2, 2)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_IVA_L_SHIFT (1 << 10)
+#define OMAP4430_RAC_VDD_IVA_L_SHIFT 10
#define OMAP4430_RAC_VDD_IVA_L_MASK BITFIELD(10, 10)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_MPU_L_SHIFT (1 << 19)
+#define OMAP4430_RAC_VDD_MPU_L_SHIFT 19
#define OMAP4430_RAC_VDD_MPU_L_MASK BITFIELD(19, 19)
/*
@@ -900,7 +900,7 @@
* PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
* PRM_VOLTSETUP_MPU_RET_SLEEP
*/
-#define OMAP4430_RAMP_DOWN_COUNT_SHIFT (1 << 16)
+#define OMAP4430_RAMP_DOWN_COUNT_SHIFT 16
#define OMAP4430_RAMP_DOWN_COUNT_MASK BITFIELD(16, 21)
/*
@@ -908,7 +908,7 @@
* PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
* PRM_VOLTSETUP_MPU_RET_SLEEP
*/
-#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT (1 << 24)
+#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT 24
#define OMAP4430_RAMP_DOWN_PRESCAL_MASK BITFIELD(24, 25)
/*
@@ -916,7 +916,7 @@
* PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
* PRM_VOLTSETUP_MPU_RET_SLEEP
*/
-#define OMAP4430_RAMP_UP_COUNT_SHIFT (1 << 0)
+#define OMAP4430_RAMP_UP_COUNT_SHIFT 0
#define OMAP4430_RAMP_UP_COUNT_MASK BITFIELD(0, 5)
/*
@@ -924,1282 +924,1282 @@
* PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
* PRM_VOLTSETUP_MPU_RET_SLEEP
*/
-#define OMAP4430_RAMP_UP_PRESCAL_SHIFT (1 << 8)
+#define OMAP4430_RAMP_UP_PRESCAL_SHIFT 8
#define OMAP4430_RAMP_UP_PRESCAL_MASK BITFIELD(8, 9)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_CORE_L_SHIFT (1 << 1)
+#define OMAP4430_RAV_VDD_CORE_L_SHIFT 1
#define OMAP4430_RAV_VDD_CORE_L_MASK BITFIELD(1, 1)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_IVA_L_SHIFT (1 << 9)
+#define OMAP4430_RAV_VDD_IVA_L_SHIFT 9
#define OMAP4430_RAV_VDD_IVA_L_MASK BITFIELD(9, 9)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_MPU_L_SHIFT (1 << 18)
+#define OMAP4430_RAV_VDD_MPU_L_SHIFT 18
#define OMAP4430_RAV_VDD_MPU_L_MASK BITFIELD(18, 18)
/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_REGADDR_SHIFT (1 << 8)
+#define OMAP4430_REGADDR_SHIFT 8
#define OMAP4430_REGADDR_MASK BITFIELD(8, 15)
/*
* Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
* PRM_VC_VAL_CMD_VDD_MPU_L
*/
-#define OMAP4430_RET_SHIFT (1 << 8)
+#define OMAP4430_RET_SHIFT 8
#define OMAP4430_RET_MASK BITFIELD(8, 15)
/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT 16
#define OMAP4430_RETAINED_BANK_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT 8
#define OMAP4430_RETAINED_BANK_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_RETAINED_BANK_STATEST_SHIFT (1 << 4)
+#define OMAP4430_RETAINED_BANK_STATEST_SHIFT 4
#define OMAP4430_RETAINED_BANK_STATEST_MASK BITFIELD(4, 5)
/*
* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
* PRM_LDO_SRAM_MPU_CTRL
*/
-#define OMAP4430_RETMODE_ENABLE_SHIFT (1 << 0)
+#define OMAP4430_RETMODE_ENABLE_SHIFT 0
#define OMAP4430_RETMODE_ENABLE_MASK BITFIELD(0, 0)
/* Used by REVISION_PRM */
-#define OMAP4430_REV_SHIFT (1 << 0)
+#define OMAP4430_REV_SHIFT 0
#define OMAP4430_REV_MASK BITFIELD(0, 7)
/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST1_SHIFT (1 << 0)
+#define OMAP4430_RST1_SHIFT 0
#define OMAP4430_RST1_MASK BITFIELD(0, 0)
/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST1ST_SHIFT (1 << 0)
+#define OMAP4430_RST1ST_SHIFT 0
#define OMAP4430_RST1ST_MASK BITFIELD(0, 0)
/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST2_SHIFT (1 << 1)
+#define OMAP4430_RST2_SHIFT 1
#define OMAP4430_RST2_MASK BITFIELD(1, 1)
/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST2ST_SHIFT (1 << 1)
+#define OMAP4430_RST2ST_SHIFT 1
#define OMAP4430_RST2ST_MASK BITFIELD(1, 1)
/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST3_SHIFT (1 << 2)
+#define OMAP4430_RST3_SHIFT 2
#define OMAP4430_RST3_MASK BITFIELD(2, 2)
/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST3ST_SHIFT (1 << 2)
+#define OMAP4430_RST3ST_SHIFT 2
#define OMAP4430_RST3ST_MASK BITFIELD(2, 2)
/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME1_SHIFT (1 << 0)
+#define OMAP4430_RSTTIME1_SHIFT 0
#define OMAP4430_RSTTIME1_MASK BITFIELD(0, 9)
/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME2_SHIFT (1 << 10)
+#define OMAP4430_RSTTIME2_SHIFT 10
#define OMAP4430_RSTTIME2_MASK BITFIELD(10, 14)
/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT (1 << 1)
+#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT 1
#define OMAP4430_RST_GLOBAL_COLD_SW_MASK BITFIELD(1, 1)
/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT (1 << 0)
+#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT 0
#define OMAP4430_RST_GLOBAL_WARM_SW_MASK BITFIELD(0, 0)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_CORE_L_SHIFT (1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_SHIFT 0
#define OMAP4430_SA_VDD_CORE_L_MASK BITFIELD(0, 0)
/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT (1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT 0
#define OMAP4430_SA_VDD_CORE_L_0_6_MASK BITFIELD(0, 6)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_IVA_L_SHIFT (1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_SHIFT 8
#define OMAP4430_SA_VDD_IVA_L_MASK BITFIELD(8, 8)
/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT (1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT 8
#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK BITFIELD(8, 14)
/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_MPU_L_SHIFT (1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_SHIFT 16
#define OMAP4430_SA_VDD_MPU_L_MASK BITFIELD(16, 16)
/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT (1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT 16
#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK BITFIELD(16, 22)
/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLH_SHIFT (1 << 0)
+#define OMAP4430_SCLH_SHIFT 0
#define OMAP4430_SCLH_MASK BITFIELD(0, 7)
/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLL_SHIFT (1 << 8)
+#define OMAP4430_SCLL_SHIFT 8
#define OMAP4430_SCLL_MASK BITFIELD(8, 15)
/* Used by PRM_RSTST */
-#define OMAP4430_SECURE_WDT_RST_SHIFT (1 << 4)
+#define OMAP4430_SECURE_WDT_RST_SHIFT 4
#define OMAP4430_SECURE_WDT_RST_MASK BITFIELD(4, 4)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_ONSTATE_SHIFT (1 << 18)
+#define OMAP4430_SL2_MEM_ONSTATE_SHIFT 18
#define OMAP4430_SL2_MEM_ONSTATE_MASK BITFIELD(18, 19)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_RETSTATE_SHIFT (1 << 9)
+#define OMAP4430_SL2_MEM_RETSTATE_SHIFT 9
#define OMAP4430_SL2_MEM_RETSTATE_MASK BITFIELD(9, 9)
/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_SL2_MEM_STATEST_SHIFT (1 << 6)
+#define OMAP4430_SL2_MEM_STATEST_SHIFT 6
#define OMAP4430_SL2_MEM_STATEST_MASK BITFIELD(6, 7)
/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_SLAVEADDR_SHIFT (1 << 0)
+#define OMAP4430_SLAVEADDR_SHIFT 0
#define OMAP4430_SLAVEADDR_MASK BITFIELD(0, 6)
/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SLEEP_RBB_SEL_SHIFT (1 << 3)
+#define OMAP4430_SLEEP_RBB_SEL_SHIFT 3
#define OMAP4430_SLEEP_RBB_SEL_MASK BITFIELD(3, 3)
/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_SLPCNT_VALUE_SHIFT (1 << 16)
+#define OMAP4430_SLPCNT_VALUE_SHIFT 16
#define OMAP4430_SLPCNT_VALUE_MASK BITFIELD(16, 23)
/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_SMPSWAITTIMEMAX_SHIFT (1 << 8)
+#define OMAP4430_SMPSWAITTIMEMAX_SHIFT 8
#define OMAP4430_SMPSWAITTIMEMAX_MASK BITFIELD(8, 23)
/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_SMPSWAITTIMEMIN_SHIFT (1 << 8)
+#define OMAP4430_SMPSWAITTIMEMIN_SHIFT 8
#define OMAP4430_SMPSWAITTIMEMIN_MASK BITFIELD(8, 23)
/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2EN_SHIFT (1 << 0)
+#define OMAP4430_SR2EN_SHIFT 0
#define OMAP4430_SR2EN_MASK BITFIELD(0, 0)
/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_IN_TRANSITION_SHIFT (1 << 6)
+#define OMAP4430_SR2_IN_TRANSITION_SHIFT 6
#define OMAP4430_SR2_IN_TRANSITION_MASK BITFIELD(6, 6)
/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_STATUS_SHIFT (1 << 3)
+#define OMAP4430_SR2_STATUS_SHIFT 3
#define OMAP4430_SR2_STATUS_MASK BITFIELD(3, 4)
/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2_WTCNT_VALUE_SHIFT (1 << 8)
+#define OMAP4430_SR2_WTCNT_VALUE_SHIFT 8
#define OMAP4430_SR2_WTCNT_VALUE_MASK BITFIELD(8, 15)
/*
* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
* PRM_LDO_SRAM_MPU_CTRL
*/
-#define OMAP4430_SRAMLDO_STATUS_SHIFT (1 << 8)
+#define OMAP4430_SRAMLDO_STATUS_SHIFT 8
#define OMAP4430_SRAMLDO_STATUS_MASK BITFIELD(8, 8)
/*
* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
* PRM_LDO_SRAM_MPU_CTRL
*/
-#define OMAP4430_SRAM_IN_TRANSITION_SHIFT (1 << 9)
+#define OMAP4430_SRAM_IN_TRANSITION_SHIFT 9
#define OMAP4430_SRAM_IN_TRANSITION_MASK BITFIELD(9, 9)
/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_SRMODEEN_SHIFT (1 << 4)
+#define OMAP4430_SRMODEEN_SHIFT 4
#define OMAP4430_SRMODEEN_MASK BITFIELD(4, 4)
/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_COUNT_SHIFT (1 << 0)
+#define OMAP4430_STABLE_COUNT_SHIFT 0
#define OMAP4430_STABLE_COUNT_MASK BITFIELD(0, 5)
/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_PRESCAL_SHIFT (1 << 8)
+#define OMAP4430_STABLE_PRESCAL_SHIFT 8
#define OMAP4430_STABLE_PRESCAL_MASK BITFIELD(8, 9)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT (1 << 20)
+#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT 20
#define OMAP4430_TCM1_MEM_ONSTATE_MASK BITFIELD(20, 21)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT (1 << 10)
+#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT 10
#define OMAP4430_TCM1_MEM_RETSTATE_MASK BITFIELD(10, 10)
/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM1_MEM_STATEST_SHIFT (1 << 8)
+#define OMAP4430_TCM1_MEM_STATEST_SHIFT 8
#define OMAP4430_TCM1_MEM_STATEST_MASK BITFIELD(8, 9)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT (1 << 22)
+#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT 22
#define OMAP4430_TCM2_MEM_ONSTATE_MASK BITFIELD(22, 23)
/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT (1 << 11)
+#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT 11
#define OMAP4430_TCM2_MEM_RETSTATE_MASK BITFIELD(11, 11)
/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM2_MEM_STATEST_SHIFT (1 << 10)
+#define OMAP4430_TCM2_MEM_STATEST_SHIFT 10
#define OMAP4430_TCM2_MEM_STATEST_MASK BITFIELD(10, 11)
/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLASS_EMU_RSTST_SHIFT (1 << 2)
+#define OMAP4430_TESLASS_EMU_RSTST_SHIFT 2
#define OMAP4430_TESLASS_EMU_RSTST_MASK BITFIELD(2, 2)
/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT (1 << 3)
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT 3
#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK BITFIELD(3, 3)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT (1 << 20)
+#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT 20
#define OMAP4430_TESLA_EDMA_ONSTATE_MASK BITFIELD(20, 21)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT (1 << 10)
+#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT 10
#define OMAP4430_TESLA_EDMA_RETSTATE_MASK BITFIELD(10, 10)
/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_EDMA_STATEST_SHIFT (1 << 8)
+#define OMAP4430_TESLA_EDMA_STATEST_SHIFT 8
#define OMAP4430_TESLA_EDMA_STATEST_MASK BITFIELD(8, 9)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_ONSTATE_SHIFT (1 << 16)
+#define OMAP4430_TESLA_L1_ONSTATE_SHIFT 16
#define OMAP4430_TESLA_L1_ONSTATE_MASK BITFIELD(16, 17)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_RETSTATE_SHIFT (1 << 8)
+#define OMAP4430_TESLA_L1_RETSTATE_SHIFT 8
#define OMAP4430_TESLA_L1_RETSTATE_MASK BITFIELD(8, 8)
/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L1_STATEST_SHIFT (1 << 4)
+#define OMAP4430_TESLA_L1_STATEST_SHIFT 4
#define OMAP4430_TESLA_L1_STATEST_MASK BITFIELD(4, 5)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_ONSTATE_SHIFT (1 << 18)
+#define OMAP4430_TESLA_L2_ONSTATE_SHIFT 18
#define OMAP4430_TESLA_L2_ONSTATE_MASK BITFIELD(18, 19)
/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_RETSTATE_SHIFT (1 << 9)
+#define OMAP4430_TESLA_L2_RETSTATE_SHIFT 9
#define OMAP4430_TESLA_L2_RETSTATE_MASK BITFIELD(9, 9)
/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L2_STATEST_SHIFT (1 << 6)
+#define OMAP4430_TESLA_L2_STATEST_SHIFT 6
#define OMAP4430_TESLA_L2_STATEST_MASK BITFIELD(6, 7)
/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_TIMEOUT_SHIFT (1 << 0)
+#define OMAP4430_TIMEOUT_SHIFT 0
#define OMAP4430_TIMEOUT_MASK BITFIELD(0, 15)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_TIMEOUTEN_SHIFT (1 << 3)
+#define OMAP4430_TIMEOUTEN_SHIFT 3
#define OMAP4430_TIMEOUTEN_MASK BITFIELD(3, 3)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_TRANSITION_EN_SHIFT (1 << 8)
+#define OMAP4430_TRANSITION_EN_SHIFT 8
#define OMAP4430_TRANSITION_EN_MASK BITFIELD(8, 8)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_TRANSITION_ST_SHIFT (1 << 8)
+#define OMAP4430_TRANSITION_ST_SHIFT 8
#define OMAP4430_TRANSITION_ST_MASK BITFIELD(8, 8)
/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_VALID_SHIFT (1 << 24)
+#define OMAP4430_VALID_SHIFT 24
#define OMAP4430_VALID_MASK BITFIELD(24, 24)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_BYPASSACK_EN_SHIFT (1 << 14)
+#define OMAP4430_VC_BYPASSACK_EN_SHIFT 14
#define OMAP4430_VC_BYPASSACK_EN_MASK BITFIELD(14, 14)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_BYPASSACK_ST_SHIFT (1 << 14)
+#define OMAP4430_VC_BYPASSACK_ST_SHIFT 14
#define OMAP4430_VC_BYPASSACK_ST_MASK BITFIELD(14, 14)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_IVA_VPACK_EN_SHIFT (1 << 30)
+#define OMAP4430_VC_IVA_VPACK_EN_SHIFT 30
#define OMAP4430_VC_IVA_VPACK_EN_MASK BITFIELD(30, 30)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_IVA_VPACK_ST_SHIFT (1 << 30)
+#define OMAP4430_VC_IVA_VPACK_ST_SHIFT 30
#define OMAP4430_VC_IVA_VPACK_ST_MASK BITFIELD(30, 30)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_EN_SHIFT (1 << 6)
+#define OMAP4430_VC_MPU_VPACK_EN_SHIFT 6
#define OMAP4430_VC_MPU_VPACK_EN_MASK BITFIELD(6, 6)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_ST_SHIFT (1 << 6)
+#define OMAP4430_VC_MPU_VPACK_ST_SHIFT 6
#define OMAP4430_VC_MPU_VPACK_ST_MASK BITFIELD(6, 6)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_RAERR_EN_SHIFT (1 << 12)
+#define OMAP4430_VC_RAERR_EN_SHIFT 12
#define OMAP4430_VC_RAERR_EN_MASK BITFIELD(12, 12)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_RAERR_ST_SHIFT (1 << 12)
+#define OMAP4430_VC_RAERR_ST_SHIFT 12
#define OMAP4430_VC_RAERR_ST_MASK BITFIELD(12, 12)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_SAERR_EN_SHIFT (1 << 11)
+#define OMAP4430_VC_SAERR_EN_SHIFT 11
#define OMAP4430_VC_SAERR_EN_MASK BITFIELD(11, 11)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_SAERR_ST_SHIFT (1 << 11)
+#define OMAP4430_VC_SAERR_ST_SHIFT 11
#define OMAP4430_VC_SAERR_ST_MASK BITFIELD(11, 11)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_TOERR_EN_SHIFT (1 << 13)
+#define OMAP4430_VC_TOERR_EN_SHIFT 13
#define OMAP4430_VC_TOERR_EN_MASK BITFIELD(13, 13)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_TOERR_ST_SHIFT (1 << 13)
+#define OMAP4430_VC_TOERR_ST_SHIFT 13
#define OMAP4430_VC_TOERR_ST_MASK BITFIELD(13, 13)
/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMAX_SHIFT (1 << 24)
+#define OMAP4430_VDDMAX_SHIFT 24
#define OMAP4430_VDDMAX_MASK BITFIELD(24, 31)
/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMIN_SHIFT (1 << 16)
+#define OMAP4430_VDDMIN_SHIFT 16
#define OMAP4430_VDDMIN_MASK BITFIELD(16, 23)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT (1 << 12)
+#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT 12
#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK BITFIELD(12, 12)
/* Used by PRM_RSTST */
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT (1 << 8)
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT 8
#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK BITFIELD(8, 8)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT (1 << 14)
+#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT 14
#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK BITFIELD(14, 14)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_PRESENCE_SHIFT (1 << 9)
+#define OMAP4430_VDD_IVA_PRESENCE_SHIFT 9
#define OMAP4430_VDD_IVA_PRESENCE_MASK BITFIELD(9, 9)
/* Used by PRM_RSTST */
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT (1 << 7)
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT 7
#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK BITFIELD(7, 7)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT (1 << 13)
+#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT 13
#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK BITFIELD(13, 13)
/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_PRESENCE_SHIFT (1 << 8)
+#define OMAP4430_VDD_MPU_PRESENCE_SHIFT 8
#define OMAP4430_VDD_MPU_PRESENCE_MASK BITFIELD(8, 8)
/* Used by PRM_RSTST */
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT (1 << 6)
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT 6
#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK BITFIELD(6, 6)
/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT (1 << 0)
+#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT 0
#define OMAP4430_VOLRA_VDD_CORE_L_MASK BITFIELD(0, 7)
/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT (1 << 8)
+#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT 8
#define OMAP4430_VOLRA_VDD_IVA_L_MASK BITFIELD(8, 15)
/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT (1 << 16)
+#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT 16
#define OMAP4430_VOLRA_VDD_MPU_L_MASK BITFIELD(16, 23)
/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_VPENABLE_SHIFT (1 << 0)
+#define OMAP4430_VPENABLE_SHIFT 0
#define OMAP4430_VPENABLE_MASK BITFIELD(0, 0)
/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP4430_VPINIDLE_SHIFT (1 << 0)
+#define OMAP4430_VPINIDLE_SHIFT 0
#define OMAP4430_VPINIDLE_MASK BITFIELD(0, 0)
/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_VPVOLTAGE_SHIFT (1 << 0)
+#define OMAP4430_VPVOLTAGE_SHIFT 0
#define OMAP4430_VPVOLTAGE_MASK BITFIELD(0, 7)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT (1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT 20
#define OMAP4430_VP_CORE_EQVALUE_EN_MASK BITFIELD(20, 20)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT (1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT 20
#define OMAP4430_VP_CORE_EQVALUE_ST_MASK BITFIELD(20, 20)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT (1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT 18
#define OMAP4430_VP_CORE_MAXVDD_EN_MASK BITFIELD(18, 18)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT (1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT 18
#define OMAP4430_VP_CORE_MAXVDD_ST_MASK BITFIELD(18, 18)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT (1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT 17
#define OMAP4430_VP_CORE_MINVDD_EN_MASK BITFIELD(17, 17)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT (1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT 17
#define OMAP4430_VP_CORE_MINVDD_ST_MASK BITFIELD(17, 17)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT (1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT 19
#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK BITFIELD(19, 19)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT (1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT 19
#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK BITFIELD(19, 19)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT (1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT 16
#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK BITFIELD(16, 16)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT (1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT 16
#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK BITFIELD(16, 16)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT (1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT 21
#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK BITFIELD(21, 21)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT (1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT 21
#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK BITFIELD(21, 21)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT (1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT 28
#define OMAP4430_VP_IVA_EQVALUE_EN_MASK BITFIELD(28, 28)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT (1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT 28
#define OMAP4430_VP_IVA_EQVALUE_ST_MASK BITFIELD(28, 28)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT (1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT 26
#define OMAP4430_VP_IVA_MAXVDD_EN_MASK BITFIELD(26, 26)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT (1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT 26
#define OMAP4430_VP_IVA_MAXVDD_ST_MASK BITFIELD(26, 26)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT (1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT 25
#define OMAP4430_VP_IVA_MINVDD_EN_MASK BITFIELD(25, 25)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT (1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT 25
#define OMAP4430_VP_IVA_MINVDD_ST_MASK BITFIELD(25, 25)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT (1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT 27
#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK BITFIELD(27, 27)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT (1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT 27
#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK BITFIELD(27, 27)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT (1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT 24
#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK BITFIELD(24, 24)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT (1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT 24
#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK BITFIELD(24, 24)
/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT (1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT 29
#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK BITFIELD(29, 29)
/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT (1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT 29
#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK BITFIELD(29, 29)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT (1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT 4
#define OMAP4430_VP_MPU_EQVALUE_EN_MASK BITFIELD(4, 4)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT (1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT 4
#define OMAP4430_VP_MPU_EQVALUE_ST_MASK BITFIELD(4, 4)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT (1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT 2
#define OMAP4430_VP_MPU_MAXVDD_EN_MASK BITFIELD(2, 2)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT (1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT 2
#define OMAP4430_VP_MPU_MAXVDD_ST_MASK BITFIELD(2, 2)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT (1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT 1
#define OMAP4430_VP_MPU_MINVDD_EN_MASK BITFIELD(1, 1)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT (1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT 1
#define OMAP4430_VP_MPU_MINVDD_ST_MASK BITFIELD(1, 1)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT (1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT 3
#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK BITFIELD(3, 3)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT (1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT 3
#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK BITFIELD(3, 3)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT (1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT 0
#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK BITFIELD(0, 0)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT (1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT 0
#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK BITFIELD(0, 0)
/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT (1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT 5
#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK BITFIELD(5, 5)
/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT (1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT 5
#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK BITFIELD(5, 5)
/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_VSETUPCNT_VALUE_SHIFT (1 << 8)
+#define OMAP4430_VSETUPCNT_VALUE_SHIFT 8
#define OMAP4430_VSETUPCNT_VALUE_MASK BITFIELD(8, 15)
/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_VSTEPMAX_SHIFT (1 << 0)
+#define OMAP4430_VSTEPMAX_SHIFT 0
#define OMAP4430_VSTEPMAX_MASK BITFIELD(0, 7)
/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_VSTEPMIN_SHIFT (1 << 0)
+#define OMAP4430_VSTEPMIN_SHIFT 0
#define OMAP4430_VSTEPMIN_MASK BITFIELD(0, 7)
/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_WAKE_MODEM_SHIFT (1 << 0)
+#define OMAP4430_WAKE_MODEM_SHIFT 0
#define OMAP4430_WAKE_MODEM_MASK BITFIELD(0, 0)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DISPC_MPU_MASK BITFIELD(0, 0)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_DMTIMER10_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_DMTIMER2_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK BITFIELD(0, 0)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT (1 << 5)
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT 5
#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK BITFIELD(5, 5)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT (1 << 4)
+#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT 4
#define OMAP4430_WKUPDEP_DSI1_MPU_MASK BITFIELD(4, 4)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT (1 << 9)
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT 9
#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK BITFIELD(9, 9)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT (1 << 8)
+#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT 8
#define OMAP4430_WKUPDEP_DSI2_MPU_MASK BITFIELD(8, 8)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT (1 << 11)
+#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT 11
#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK BITFIELD(11, 11)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT (1 << 10)
+#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT 10
#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK BITFIELD(10, 10)
/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT (1 << 19)
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT 19
#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK BITFIELD(19, 19)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT (1 << 13)
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT 13
#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK BITFIELD(13, 13)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT (1 << 12)
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT 12
#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK BITFIELD(12, 12)
/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT (1 << 14)
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT 14
#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK BITFIELD(14, 14)
/* Used by PM_L4PER_HECC1_WKDEP */
-#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_HECC1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_HECC2_WKDEP */
-#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_HECC2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_KEYBOARD_WKDEP */
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMC1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMC2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMC6_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_WKUP_RTC_WKDEP */
-#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_RTC_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SATA_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_SATA_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT (1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT 7
#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK BITFIELD(7, 7)
/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT (1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT 6
#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK BITFIELD(6, 6)
/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ALWON_SR_MPU_WKDEP */
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_TIMER12_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_TIMER1_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_UART1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_UART1_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_UART2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_UART2_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_UART3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_UART3_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT (1 << 2)
+#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT 2
#define OMAP4430_WKUPDEP_UART3_TESLA_MASK BITFIELD(2, 2)
/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_UART4_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_UART4_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_USIM_MPU_MASK BITFIELD(0, 0)
/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT (1 << 3)
+#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT 3
#define OMAP4430_WKUPDEP_USIM_SDMA_MASK BITFIELD(3, 3)
/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK BITFIELD(1, 1)
/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_WDT2_MPU_MASK BITFIELD(0, 0)
/* Used by PM_ABE_WDT3_WKDEP */
-#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT (1 << 0)
+#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT 0
#define OMAP4430_WKUPDEP_WDT3_MPU_MASK BITFIELD(0, 0)
/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT (1 << 8)
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT 8
#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK BITFIELD(8, 8)
/* Used by PM_L3INIT_XHPI_WKDEP */
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT (1 << 1)
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT 1
#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK BITFIELD(1, 1)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_CTRL_SHIFT (1 << 8)
+#define OMAP4430_WUCLK_CTRL_SHIFT 8
#define OMAP4430_WUCLK_CTRL_MASK BITFIELD(8, 8)
/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_STATUS_SHIFT (1 << 9)
+#define OMAP4430_WUCLK_STATUS_SHIFT 9
#define OMAP4430_WUCLK_STATUS_MASK BITFIELD(9, 9)
#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 40f0062..5fba2aa 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -179,9 +179,11 @@
/* Registers appearing on both 24xx and 34xx */
-#define RM_RSTCTRL 0x0050
-#define RM_RSTTIME 0x0054
-#define RM_RSTST 0x0058
+#define OMAP2_RM_RSTCTRL 0x0050
+#define OMAP2_RM_RSTTIME 0x0054
+#define OMAP2_RM_RSTST 0x0058
+#define OMAP2_PM_PWSTCTRL 0x00e0
+#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
@@ -191,8 +193,6 @@
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
-#define PM_PWSTCTRL 0x00e0
-#define PM_PWSTST 0x00e4
/* Omap2 specific registers */
#define OMAP24XX_PM_WKEN2 0x00a4
@@ -220,6 +220,13 @@
#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+/* Omap4 specific registers */
+#define OMAP4_RM_RSTCTRL 0x0000
+#define OMAP4_RM_RSTTIME 0x0004
+#define OMAP4_RM_RSTST 0x0008
+#define OMAP4_PM_PWSTCTRL 0x0000
+#define OMAP4_PM_PWSTST 0x0004
+
#ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
new file mode 100644
index 0000000..cd43529
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Numonyx M65KXXXXAM
+ *
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+
+#include <plat/sdrc.h>
+
+/* Numonyx M65KXXXXAM */
+static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
+ [0] = {
+ .rate = 200000000,
+ .actim_ctrla = 0xe321d4c6,
+ .actim_ctrlb = 0x00022328,
+ .rfr_ctrl = 0x0005e601,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 166000000,
+ .actim_ctrla = 0xba9dc485,
+ .actim_ctrlb = 0x00022321,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 133000000,
+ .actim_ctrla = 0x9a19b485,
+ .actim_ctrlb = 0x0002231b,
+ .rfr_ctrl = 0x0003de01,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x594ca242,
+ .actim_ctrlb = 0x00022310,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index cbfbd14..4c65f56 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -119,8 +119,15 @@
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{
- omap2_sdrc_base = omap2_globals->sdrc;
- omap2_sms_base = omap2_globals->sms;
+ /* Static mapping, never released */
+ if (omap2_globals->sdrc) {
+ omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
+ WARN_ON(!omap2_sdrc_base);
+ }
+ if (omap2_globals->sms) {
+ omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
+ WARN_ON(!omap2_sms_base);
+ }
}
/**
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e10a02d..b79bc89 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -23,6 +23,7 @@
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -80,7 +81,6 @@
static struct plat_serial8250_port serial_platform_data0[] = {
{
- .mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -93,7 +93,6 @@
static struct plat_serial8250_port serial_platform_data1[] = {
{
- .mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -106,7 +105,6 @@
static struct plat_serial8250_port serial_platform_data2[] = {
{
- .mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -117,10 +115,9 @@
}
};
-#ifdef CONFIG_ARCH_OMAP4
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
- .mapbase = OMAP_UART4_BASE,
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
@@ -130,7 +127,26 @@
.flags = 0
}
};
+
+static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
+{
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
+}
+#else
+static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
+{
+}
#endif
+
+void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
+{
+ serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
+ serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
+ serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
+ if (cpu_is_omap3630() || cpu_is_omap44xx())
+ omap2_set_globals_uart4(omap2_globals);
+}
+
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -145,6 +161,13 @@
return (unsigned int)__raw_readb(up->membase + offset);
}
+static inline void __serial_write_reg(struct uart_port *up, int offset,
+ int value)
+{
+ offset <<= up->regshift;
+ __raw_writeb(value, up->membase + offset);
+}
+
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
@@ -574,7 +597,7 @@
},
},
},
-#ifdef CONFIG_ARCH_OMAP4
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
{
.pdev = {
.name = "serial8250",
@@ -605,6 +628,20 @@
return __serial_read_reg(up, offset);
}
+static void serial_out_override(struct uart_port *up, int offset, int value)
+{
+ unsigned int status, tmout = 10000;
+
+ status = __serial_read_reg(up, UART_LSR);
+ while (!(status & UART_LSR_THRE)) {
+ /* Wait up to 10ms for the character(s) to be sent. */
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ status = __serial_read_reg(up, UART_LSR);
+ }
+ __serial_write_reg(up, offset, value);
+}
void __init omap_serial_early_init(void)
{
int i;
@@ -701,15 +738,19 @@
DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
}
- /* omap44xx: Never read empty UART fifo
- * omap3xxx: Never read empty UART fifo on UARTs
- * with IP rev >=0x52
- */
- if (cpu_is_omap44xx())
- uart->p->serial_in = serial_in_override;
- else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
- >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
- uart->p->serial_in = serial_in_override;
+ /*
+ * omap44xx: Never read empty UART fifo
+ * omap3xxx: Never read empty UART fifo on UARTs
+ * with IP rev >=0x52
+ */
+ if (cpu_is_omap44xx()) {
+ uart->p->serial_in = serial_in_override;
+ uart->p->serial_out = serial_out_override;
+ } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+ >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
+ uart->p->serial_in = serial_in_override;
+ uart->p->serial_out = serial_out_override;
+ }
}
/**
@@ -721,8 +762,13 @@
*/
void __init omap_serial_init(void)
{
- int i;
+ int i, nr_ports;
- for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
+ if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+ nr_ports = 3;
+ else
+ nr_ports = ARRAY_SIZE(omap_uart);
+
+ for (i = 0; i < nr_ports; i++)
omap_serial_init_port(i);
}
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index c3626ea4..d522cd7 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -33,12 +33,14 @@
#include "prm.h"
#include "sdrc.h"
+#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
+
#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
OMAP3430_PM_PREPWSTST)
#define PM_PREPWSTST_CORE_P 0x48306AE8
#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
#define SRAM_BASE_P 0x40200000
#define CONTROL_STAT 0x480022F0
@@ -57,6 +59,37 @@
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+ .text
+/* Function to aquire the semaphore in scratchpad */
+ENTRY(lock_scratchpad_sem)
+ stmfd sp!, {lr} @ save registers on stack
+wait_sem:
+ mov r0,#1
+ ldr r1, sdrc_scratchpad_sem
+wait_loop:
+ ldr r2, [r1] @ load the lock value
+ cmp r2, r0 @ is the lock free ?
+ beq wait_loop @ not free...
+ swp r2, r0, [r1] @ semaphore free so lock it and proceed
+ cmp r2, r0 @ did we succeed ?
+ beq wait_sem @ no - try again
+ ldmfd sp!, {pc} @ restore regs and return
+sdrc_scratchpad_sem:
+ .word SDRC_SCRATCHPAD_SEM_V
+ENTRY(lock_scratchpad_sem_sz)
+ .word . - lock_scratchpad_sem
+
+ .text
+/* Function to release the scratchpad semaphore */
+ENTRY(unlock_scratchpad_sem)
+ stmfd sp!, {lr} @ save registers on stack
+ ldr r3, sdrc_scratchpad_sem
+ mov r2,#0
+ str r2,[r3]
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(unlock_scratchpad_sem_sz)
+ .word . - unlock_scratchpad_sem
+
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
@@ -251,6 +284,21 @@
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
+#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ /* Restore L2 aux control register */
+ @ set service ID for PPA
+ mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ mov r12, r0 @ copy service ID in r12
+ mov r1, #0 @ set task ID for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC]
+ adds r3, r3, #8 @ r3 points to parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
@@ -264,6 +312,11 @@
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#12]
+ mov r12, #0x2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
mov r1, #0
/* Invalidate all instruction caches to PoU
@@ -272,7 +325,7 @@
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
- adds r3, r3, #8
+ adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
@@ -391,7 +444,9 @@
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
- stmia r8!, {r4-r5}
+ stmia r8!, {r4-r5} @ Push parameters for restore call
+ mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
+ stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index cd04dea..74fbed8 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -85,8 +85,6 @@
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
- if (cpu_is_omap44xx())
- period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -150,9 +148,6 @@
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
- if (cpu_is_omap44xx())
- /* Assuming 32kHz clk is driving GPT1 */
- tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
index c1a650a..954682e 100644
--- a/arch/arm/mach-omap2/timer-mpu.c
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -28,7 +28,7 @@
*/
void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- evt->irq = INT_44XX_LOCALTIMER_IRQ;
+ evt->irq = OMAP44XX_IRQ_LOCALTIMER;
twd_timer_setup(evt);
}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a80441d..6d41fa7 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -47,70 +47,11 @@
},
};
-static int clk_on;
-
-static int musb_set_clock(struct clk *clk, int state)
-{
- if (state) {
- if (clk_on > 0)
- return -ENODEV;
-
- clk_enable(clk);
- clk_on = 1;
- } else {
- if (clk_on == 0)
- return -ENODEV;
-
- clk_disable(clk);
- clk_on = 0;
- }
-
- return 0;
-}
-
-static struct musb_hdrc_eps_bits musb_eps[] = {
- { "ep1_tx", 10, },
- { "ep1_rx", 10, },
- { "ep2_tx", 9, },
- { "ep2_rx", 9, },
- { "ep3_tx", 3, },
- { "ep3_rx", 3, },
- { "ep4_tx", 3, },
- { "ep4_rx", 3, },
- { "ep5_tx", 3, },
- { "ep5_rx", 3, },
- { "ep6_tx", 3, },
- { "ep6_rx", 3, },
- { "ep7_tx", 3, },
- { "ep7_rx", 3, },
- { "ep8_tx", 2, },
- { "ep8_rx", 2, },
- { "ep9_tx", 2, },
- { "ep9_rx", 2, },
- { "ep10_tx", 2, },
- { "ep10_rx", 2, },
- { "ep11_tx", 2, },
- { "ep11_rx", 2, },
- { "ep12_tx", 2, },
- { "ep12_rx", 2, },
- { "ep13_tx", 2, },
- { "ep13_rx", 2, },
- { "ep14_tx", 2, },
- { "ep14_rx", 2, },
- { "ep15_tx", 2, },
- { "ep15_rx", 2, },
-};
-
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
- .soft_con = 1,
- .dma = 1,
.num_eps = 16,
- .dma_channels = 7,
- .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
.ram_bits = 12,
- .eps_bits = musb_eps,
};
static struct musb_hdrc_platform_data musb_plat = {
@@ -122,7 +63,6 @@
.mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
- .set_clock = musb_set_clock,
.config = &musb_config,
/* REVISIT charge pump on TWL4030 can supply up to
@@ -146,28 +86,34 @@
.resource = musb_resources,
};
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
- if (cpu_is_omap243x())
+ if (cpu_is_omap243x()) {
musb_resources[0].start = OMAP243X_HS_BASE;
- else
+ } else if (cpu_is_omap34xx()) {
musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
- musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+ } else if (cpu_is_omap44xx()) {
+ musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
+ musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
+ musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
+ }
+ musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
/*
* REVISIT: This line can be removed once all the platforms using
* musb_core.c have been converted to use use clkdev.
*/
musb_plat.clock = "ick";
+ musb_plat.board_data = board_data;
+ musb_plat.power = board_data->power >> 1;
+ musb_plat.mode = board_data->mode;
- if (platform_device_register(&musb_device) < 0) {
+ if (platform_device_register(&musb_device) < 0)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
- return;
- }
}
#else
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
}
#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index c7f808bf..91e0e39 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/orion5x.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =ORION5X_REGS_PHYS_BASE
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
index 7147a29..06b50ae 100644
--- a/arch/arm/mach-orion5x/include/mach/vmalloc.h
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
* arch/arm/mach-orion5x/include/mach/vmalloc.h
*/
-#define VMALLOC_END 0xfd800000
+#define VMALLOC_END 0xfd800000UL
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 898c0e8..9d1975f 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -22,8 +22,9 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
#include <mach/clock.h>
#include "clock.h"
@@ -56,18 +57,19 @@
}
}
-static inline void clk_reg_disable(struct clk *clk)
+static void clk_reg_disable(struct clk *clk)
{
if (clk->enable_reg)
__raw_writel(__raw_readl(clk->enable_reg) &
~(1 << clk->enable_shift), clk->enable_reg);
}
-static inline void clk_reg_enable(struct clk *clk)
+static int clk_reg_enable(struct clk *clk)
{
if (clk->enable_reg)
__raw_writel(__raw_readl(clk->enable_reg) |
(1 << clk->enable_shift), clk->enable_reg);
+ return 0;
}
static inline void clk_reg_disable1(struct clk *clk)
@@ -636,31 +638,34 @@
static struct clk i2c0_ck = {
.name = "i2c0_ck",
.parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
+ .flags = NEEDS_INITIALIZATION | FIXED_RATE,
.enable_shift = 0,
.enable_reg = I2CCLKCTRL_REG,
+ .rate = 13000000,
+ .enable = clk_reg_enable,
+ .disable = clk_reg_disable,
};
static struct clk i2c1_ck = {
.name = "i2c1_ck",
.parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
+ .flags = NEEDS_INITIALIZATION | FIXED_RATE,
.enable_shift = 1,
.enable_reg = I2CCLKCTRL_REG,
+ .rate = 13000000,
+ .enable = clk_reg_enable,
+ .disable = clk_reg_disable,
};
static struct clk i2c2_ck = {
.name = "i2c2_ck",
.parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
+ .flags = NEEDS_INITIALIZATION | FIXED_RATE,
.enable_shift = 2,
.enable_reg = USB_OTG_CLKCTRL_REG,
+ .rate = 13000000,
+ .enable = clk_reg_enable,
+ .disable = clk_reg_disable,
};
static struct clk spi0_ck = {
@@ -738,16 +743,16 @@
.name = "wdt_ck",
.parent = &per_ck,
.flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
.enable_shift = 0,
.enable_reg = TIMCLKCTRL_REG,
+ .enable = clk_reg_enable,
+ .disable = clk_reg_disable,
};
/* These clocks are visible outside this module
* and can be initialized
*/
-static struct clk *onchip_clks[] = {
+static struct clk *onchip_clks[] __initdata = {
&ck_13MHz,
&ck_pll1,
&ck_pll4,
@@ -777,49 +782,74 @@
&wdt_ck,
};
+static struct clk_lookup onchip_clkreg[] = {
+ { .clk = &ck_13MHz, .con_id = "ck_13MHz" },
+ { .clk = &ck_pll1, .con_id = "ck_pll1" },
+ { .clk = &ck_pll4, .con_id = "ck_pll4" },
+ { .clk = &ck_pll5, .con_id = "ck_pll5" },
+ { .clk = &ck_pll3, .con_id = "ck_pll3" },
+ { .clk = &vfp9_ck, .con_id = "vfp9_ck" },
+ { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" },
+ { .clk = &hclk_ck, .con_id = "hclk_ck" },
+ { .clk = &dma_ck, .con_id = "dma_ck" },
+ { .clk = &flash_ck, .con_id = "flash_ck" },
+ { .clk = &dum_ck, .con_id = "dum_ck" },
+ { .clk = &keyscan_ck, .con_id = "keyscan_ck" },
+ { .clk = &pwm1_ck, .con_id = "pwm1_ck" },
+ { .clk = &pwm2_ck, .con_id = "pwm2_ck" },
+ { .clk = &jpeg_ck, .con_id = "jpeg_ck" },
+ { .clk = &ms_ck, .con_id = "ms_ck" },
+ { .clk = &touch_ck, .con_id = "touch_ck" },
+ { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" },
+ { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" },
+ { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" },
+ { .clk = &spi0_ck, .con_id = "spi0_ck" },
+ { .clk = &spi1_ck, .con_id = "spi1_ck" },
+ { .clk = &uart3_ck, .con_id = "uart3_ck" },
+ { .clk = &uart4_ck, .con_id = "uart4_ck" },
+ { .clk = &uart5_ck, .con_id = "uart5_ck" },
+ { .clk = &uart6_ck, .con_id = "uart6_ck" },
+ { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" },
+};
+
+static void local_clk_disable(struct clk *clk)
+{
+ if (WARN_ON(clk->usecount == 0))
+ return;
+
+ if (!(--clk->usecount)) {
+ if (clk->disable)
+ clk->disable(clk);
+ else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+ clk->set_rate(clk, 0);
+ if (clk->parent)
+ local_clk_disable(clk->parent);
+ }
+}
+
static int local_clk_enable(struct clk *clk)
{
int ret = 0;
- if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
- && clk->user_rate)
- ret = clk->set_rate(clk, clk->user_rate);
- return ret;
-}
+ if (clk->usecount == 0) {
+ if (clk->parent) {
+ ret = local_clk_enable(clk->parent);
+ if (ret != 0)
+ goto out;
+ }
-static void local_clk_disable(struct clk *clk)
-{
- if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
- clk->set_rate(clk, 0);
-}
+ if (clk->enable)
+ ret = clk->enable(clk);
+ else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+ && clk->user_rate)
+ ret = clk->set_rate(clk, clk->user_rate);
-static void local_clk_unuse(struct clk *clk)
-{
- if (clk->usecount > 0 && !(--clk->usecount)) {
- local_clk_disable(clk);
- if (clk->parent)
- local_clk_unuse(clk->parent);
- }
-}
-
-static int local_clk_use(struct clk *clk)
-{
- int ret = 0;
- if (clk->usecount++ == 0) {
- if (clk->parent)
- ret = local_clk_use(clk->parent);
-
- if (ret != 0) {
- clk->usecount--;
+ if (ret != 0 && clk->parent) {
+ local_clk_disable(clk->parent);
goto out;
}
- ret = local_clk_enable(clk);
-
- if (ret != 0 && clk->parent) {
- local_clk_unuse(clk->parent);
- clk->usecount--;
- }
+ clk->usecount++;
}
out:
return ret;
@@ -866,35 +896,6 @@
EXPORT_SYMBOL(clk_set_rate);
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *clk = ERR_PTR(-ENOENT);
- struct clk **clkp;
-
- clock_lock();
- for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
- clkp++) {
- if (strcmp(id, (*clkp)->name) == 0
- && try_module_get((*clkp)->owner)) {
- clk = (*clkp);
- break;
- }
- }
- clock_unlock();
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
- clock_lock();
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
- clock_unlock();
-}
-EXPORT_SYMBOL(clk_put);
-
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long ret;
@@ -907,10 +908,10 @@
int clk_enable(struct clk *clk)
{
- int ret = 0;
+ int ret;
clock_lock();
- ret = local_clk_use(clk);
+ ret = local_clk_enable(clk);
clock_unlock();
return ret;
}
@@ -920,7 +921,7 @@
void clk_disable(struct clk *clk)
{
clock_lock();
- local_clk_unuse(clk);
+ local_clk_disable(clk);
clock_unlock();
}
@@ -967,18 +968,24 @@
for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
clkp++) {
- if (((*clkp)->flags & NEEDS_INITIALIZATION)
- && ((*clkp)->set_rate)) {
- (*clkp)->user_rate = (*clkp)->rate;
- local_set_rate((*clkp), (*clkp)->user_rate);
- if ((*clkp)->set_parent)
- (*clkp)->set_parent((*clkp), (*clkp)->parent);
+ struct clk *clk = *clkp;
+ if (clk->flags & NEEDS_INITIALIZATION) {
+ if (clk->set_rate) {
+ clk->user_rate = clk->rate;
+ local_set_rate(clk, clk->user_rate);
+ if (clk->set_parent)
+ clk->set_parent(clk, clk->parent);
+ }
+ if (clk->enable && clk->usecount)
+ clk->enable(clk);
+ if (clk->disable && !clk->usecount)
+ clk->disable(clk);
}
pr_debug("%s: clock %s, rate %ld\n",
- __func__, (*clkp)->name, (*clkp)->rate);
+ __func__, clk->name, clk->rate);
}
- local_clk_use(&ck_pll4);
+ local_clk_enable(&ck_pll4);
/* if ck_13MHz is not used, disable it. */
if (ck_13MHz.usecount == 0)
@@ -987,6 +994,8 @@
/* Disable autoclocking */
__raw_writeb(0xff, AUTOCLK_CTRL);
+ clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
+
return 0;
}
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
index cd58f37..39720d6 100644
--- a/arch/arm/mach-pnx4008/clock.h
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -14,8 +14,6 @@
#define __ARCH_ARM_PNX4008_CLOCK_H__
struct clk {
- struct list_head node;
- struct module *owner;
const char *name;
struct clk *parent;
struct clk *propagate_next;
@@ -29,9 +27,11 @@
u8 enable_shift1;
u32 enable_reg1;
u32 parent_switch_reg;
- u32(*round_rate) (struct clk *, u32);
+ u32(*round_rate) (struct clk *, u32);
int (*set_rate) (struct clk *, u32);
int (*set_parent) (struct clk * clk, struct clk * parent);
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
};
/* Flags */
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index f3fea29..8103f96 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -18,120 +18,24 @@
#include <mach/irqs.h>
#include <mach/i2c.h>
-static int set_clock_run(struct platform_device *pdev)
-{
- struct clk *clk;
- char name[10];
- int retval = 0;
-
- snprintf(name, 10, "i2c%d_ck", pdev->id);
- clk = clk_get(&pdev->dev, name);
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 1);
- clk_put(clk);
- } else
- retval = -ENOENT;
-
- return retval;
-}
-
-static int set_clock_stop(struct platform_device *pdev)
-{
- struct clk *clk;
- char name[10];
- int retval = 0;
-
- snprintf(name, 10, "i2c%d_ck", pdev->id);
- clk = clk_get(&pdev->dev, name);
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 0);
- clk_put(clk);
- } else
- retval = -ENOENT;
-
- return retval;
-}
-
-static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
-{
- int retval = 0;
-#ifdef CONFIG_PM
- retval = set_clock_run(pdev);
-#endif
- return retval;
-}
-
-static int i2c_pnx_resume(struct platform_device *pdev)
-{
- int retval = 0;
-#ifdef CONFIG_PM
- retval = set_clock_run(pdev);
-#endif
- return retval;
-}
-
-static u32 calculate_input_freq(struct platform_device *pdev)
-{
- return HCLK_MHZ;
-}
-
-
-static struct i2c_pnx_algo_data pnx_algo_data0 = {
+static struct i2c_pnx_data i2c0_data = {
+ .name = I2C_CHIP_NAME "0",
.base = PNX4008_I2C1_BASE,
.irq = I2C_1_INT,
};
-static struct i2c_pnx_algo_data pnx_algo_data1 = {
+static struct i2c_pnx_data i2c1_data = {
+ .name = I2C_CHIP_NAME "1",
.base = PNX4008_I2C2_BASE,
.irq = I2C_2_INT,
};
-static struct i2c_pnx_algo_data pnx_algo_data2 = {
+static struct i2c_pnx_data i2c2_data = {
+ .name = "USB-I2C",
.base = (PNX4008_USB_CONFIG_BASE + 0x300),
.irq = USB_I2C_INT,
};
-static struct i2c_adapter pnx_adapter0 = {
- .name = I2C_CHIP_NAME "0",
- .algo_data = &pnx_algo_data0,
-};
-static struct i2c_adapter pnx_adapter1 = {
- .name = I2C_CHIP_NAME "1",
- .algo_data = &pnx_algo_data1,
-};
-
-static struct i2c_adapter pnx_adapter2 = {
- .name = "USB-I2C",
- .algo_data = &pnx_algo_data2,
-};
-
-static struct i2c_pnx_data i2c0_data = {
- .suspend = i2c_pnx_suspend,
- .resume = i2c_pnx_resume,
- .calculate_input_freq = calculate_input_freq,
- .set_clock_run = set_clock_run,
- .set_clock_stop = set_clock_stop,
- .adapter = &pnx_adapter0,
-};
-
-static struct i2c_pnx_data i2c1_data = {
- .suspend = i2c_pnx_suspend,
- .resume = i2c_pnx_resume,
- .calculate_input_freq = calculate_input_freq,
- .set_clock_run = set_clock_run,
- .set_clock_stop = set_clock_stop,
- .adapter = &pnx_adapter1,
-};
-
-static struct i2c_pnx_data i2c2_data = {
- .suspend = i2c_pnx_suspend,
- .resume = i2c_pnx_resume,
- .calculate_input_freq = calculate_input_freq,
- .set_clock_run = set_clock_run,
- .set_clock_stop = set_clock_stop,
- .adapter = &pnx_adapter2,
-};
-
static struct platform_device i2c0_device = {
.name = "pnx-i2c",
.id = 0,
diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f..6ca8bd3 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00090000
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index 5ff0196..b383c7d 100644
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -14,60 +14,6 @@
#ifndef __PNX4008_TIMEX_H
#define __PNX4008_TIMEX_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-
#define CLOCK_TICK_RATE 1000000
-#define TICKS2USECS(x) (x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT 1
-#define RESET_COUNT0 (1<<1)
-#define STOP_COUNT0 (1<<2)
-#define MR1_INT (1<<3)
-#define RESET_COUNT1 (1<<4)
-#define STOP_COUNT1 (1<<5)
-#define MR2_INT (1<<6)
-#define RESET_COUNT2 (1<<7)
-#define STOP_COUNT2 (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB 1
-#define RESET_COUNT (1<<1)
-#define DEBUG_EN (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT 1
-#define MATCH1_INT (1<<1)
-#define MATCH2_INT (1<<2)
-#define RTC_TICK0 (1<<4)
-#define RTC_TICK1 (1<<5)
-
#endif
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index b3d8d53..1f05853 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -21,6 +21,8 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
#include <mach/pm.h>
#include <mach/clock.h>
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index fc0ba18..0c8aad4 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -30,6 +30,8 @@
#include <asm/mach/time.h>
#include <asm/errno.h>
+#include "time.h"
+
/*! Note: all timers are UPCOUNTING */
/*!
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
new file mode 100644
index 0000000..75e88c5
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef PNX_TIME_H
+#define PNX_TIME_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define TICKS2USECS(x) (x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT 1
+#define RESET_COUNT0 (1<<1)
+#define STOP_COUNT0 (1<<2)
+#define MR1_INT (1<<3)
+#define RESET_COUNT1 (1<<4)
+#define STOP_COUNT1 (1<<5)
+#define MR2_INT (1<<6)
+#define RESET_COUNT2 (1<<7)
+#define STOP_COUNT2 (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB 1
+#define RESET_COUNT (1<<1)
+#define DEBUG_EN (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT 1
+#define MATCH1_INT (1<<1)
+#define MATCH2_INT (1<<2)
+#define RTC_TICK0 (1<<4)
+#define RTC_TICK1 (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 49ae382..abba008 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -78,11 +78,3 @@
.enable = clk_cken_enable,
.disable = clk_cken_disable,
};
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 978a366..d848874 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -67,7 +67,3 @@
extern void clk_pxa3xx_cken_disable(struct clk *);
#endif
-void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(const char *alias, const char *alias_name, char *id,
- struct device *dev);
-
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 91417f0..96ed130 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -128,6 +128,6 @@
void eseries_register_clks(void)
{
- clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+ clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 55d6a17..01cf813 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x40000000 @ physical
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
index e90c5ee..bfecfbf 100644
--- a/arch/arm/mach-pxa/include/mach/vmalloc.h
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -8,4 +8,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define VMALLOC_END (0xe8000000)
+#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 2c1b0b7..0b9ad30 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -349,7 +349,7 @@
reset_status = RCSR;
- clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
+ clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
@@ -370,7 +370,7 @@
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
if (cpu_is_pxa255())
- clks_register(&pxa25x_hwuart_clkreg, 1);
+ clkdev_add(&pxa25x_hwuart_clkreg);
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6a0b731..d783123 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -392,7 +392,7 @@
reset_status = RCSR;
- clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
+ clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index f4af6e2b..40bb165 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -102,12 +102,12 @@
if (cpu_is_pxa300() || cpu_is_pxa310()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa300_mfp_addr_map);
- clks_register(ARRAY_AND_SIZE(common_clkregs));
+ clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
}
if (cpu_is_pxa310()) {
mfp_init_addr(pxa310_mfp_addr_map);
- clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
+ clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
}
return 0;
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index c7373e7..8d614ec 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -90,7 +90,7 @@
if (cpu_is_pxa320()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa320_mfp_addr_map);
- clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
+ clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
}
return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index fcb0721..4d7c03e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -634,7 +634,7 @@
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
- clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
+ clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9f29343..90bd4ef 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -346,10 +346,7 @@
static int __init clk_init(void)
{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
arch_initcall(clk_init);
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 932d8af..8662228 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
#error "Unknown RealView platform"
#endif
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
index fe0de1b..a2a4c68 100644
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf8000000
+#define VMALLOC_END 0xf8000000UL
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index b2a939ff..6fc8d66 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x03000000
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4c29a89..0eef78b 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index f0ef0ab..239476b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
index 4d4fe48..9146568 100644
--- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xE0000000)
+#define VMALLOC_END (0xe0000000UL)
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
index b18ac52..5c88875 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 9d142cc..e181f57 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d..336adcc 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
index ec8fdc5..b3d0023 100644
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
/*
* arch/arm/mach-sa1100/include/mach/vmalloc.h
*/
-#define VMALLOC_END (0xe8000000)
+#define VMALLOC_END (0xe8000000UL)
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index f97a762..50f071c 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mov \rx, #0xe0000000
orr \rx, \rx, #0x000003f8
.endm
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 111f7ea..5af71d5 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -610,34 +610,34 @@
static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 18900000)
+ if (rate <= 18900000)
return 18900000;
- if (rate >= 20800000)
+ if (rate <= 20800000)
return 20800000;
- if (rate >= 23100000)
+ if (rate <= 23100000)
return 23100000;
- if (rate >= 26000000)
+ if (rate <= 26000000)
return 26000000;
- if (rate >= 29700000)
+ if (rate <= 29700000)
return 29700000;
- if (rate >= 34700000)
+ if (rate <= 34700000)
return 34700000;
- if (rate >= 41600000)
+ if (rate <= 41600000)
return 41600000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
return -EINVAL;
}
static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
{
- if (rate >= 13000000)
+ if (rate <= 13000000)
return 13000000;
- if (rate >= 52000000)
+ if (rate <= 52000000)
return 52000000;
- if (rate >= 104000000)
+ if (rate <= 104000000)
return 104000000;
- if (rate >= 208000000)
+ if (rate <= 208000000)
return 208000000;
return -EINVAL;
}
@@ -1276,11 +1276,8 @@
static void __init clk_register(void)
{
- int i;
-
/* Register the lookups */
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
/*
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..01b5031 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2010 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -19,6 +19,7 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <mach/coh901318.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -29,6 +30,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
+#include <mach/dma_channels.h>
#include "clock.h"
#include "mmc.h"
@@ -372,8 +374,1019 @@
},
};
+static struct resource dma_resource[] = {
+ {
+ .start = U300_DMAC_BASE,
+ .end = U300_DMAC_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_DMA,
+ .end = IRQ_U300_DMA,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+/* points out all dma slave channels.
+ * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
+ * Select all channels from A to B, end of list is marked with -1,-1
+ */
+static int dma_slave_channels[] = {
+ U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
+ U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
+
+/* points out all dma memcpy channels. */
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
+
+#else /* CONFIG_MACH_U300_BS335 */
+
+static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
+static int dma_memcpy_channels[] = {
+ U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
+
+#endif
+
+/** register dma for memory access
+ *
+ * active 1 means dma intends to access memory
+ * 0 means dma wont access memory
+ */
+static void coh901318_access_memory_state(struct device *dev, bool active)
+{
+}
+
+#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
+ COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
+ COH901318_CX_CFG_LCR_DISABLE | \
+ COH901318_CX_CFG_TC_IRQ_ENABLE | \
+ COH901318_CX_CFG_BE_IRQ_ENABLE)
+#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+ COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+ COH901318_CX_CTRL_TCP_DISABLE | \
+ COH901318_CX_CTRL_TC_IRQ_ENABLE | \
+ COH901318_CX_CTRL_HSP_DISABLE | \
+ COH901318_CX_CTRL_HSS_DISABLE | \
+ COH901318_CX_CTRL_DDMA_LEGACY | \
+ COH901318_CX_CTRL_PRDD_SOURCE)
+
+const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
+ {
+ .number = U300_DMA_MSL_TX_0,
+ .name = "MSL TX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_1,
+ .name = "MSL TX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_2,
+ .name = "MSL TX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .desc_nbr_max = 10,
+ },
+ {
+ .number = U300_DMA_MSL_TX_3,
+ .name = "MSL TX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_4,
+ .name = "MSL TX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_MSL_TX_5,
+ .name = "MSL TX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_TX_6,
+ .name = "MSL TX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
+ },
+ {
+ .number = U300_DMA_MSL_RX_0,
+ .name = "MSL RX 0",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MSL_RX_1,
+ .name = "MSL RX 1",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_2,
+ .name = "MSL RX 2",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_3,
+ .name = "MSL RX 3",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_4,
+ .name = "MSL RX 4",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_5,
+ .name = "MSL RX 5",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_MSL_RX_6,
+ .name = "MSL RX 6",
+ .priority_high = 0,
+ .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
+ },
+ {
+ .number = U300_DMA_MMCSD_RX_TX,
+ .name = "MMCSD RX TX",
+ .priority_high = 0,
+ .dev_addr = U300_MMCSD_BASE + 0x080,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY,
+
+ },
+ {
+ .number = U300_DMA_MSPRO_TX,
+ .name = "MSPRO TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_MSPRO_RX,
+ .name = "MSPRO RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_TX,
+ .name = "UART0 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART0_RX,
+ .name = "UART0 RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_TX,
+ .name = "APEX TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_APEX_RX,
+ .name = "APEX RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_TX,
+ .name = "PCM I2S0 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S0_RX,
+ .name = "PCM I2S0 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S0_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_TX,
+ .name = "PCM I2S1 TX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x14,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_SOURCE,
+ },
+ {
+ .number = U300_DMA_PCM_I2S1_RX,
+ .name = "PCM I2S1 RX",
+ .priority_high = 1,
+ .dev_addr = U300_PCM_I2S1_BASE + 0x10,
+ .param.config = COH901318_CX_CFG_CH_DISABLE |
+ COH901318_CX_CFG_LCR_DISABLE |
+ COH901318_CX_CFG_TC_IRQ_ENABLE |
+ COH901318_CX_CFG_BE_IRQ_ENABLE,
+ .param.ctrl_lli_chained = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_DISABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_DISABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ .param.ctrl_lli_last = 0 |
+ COH901318_CX_CTRL_TC_ENABLE |
+ COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+ COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+ COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+ COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+ COH901318_CX_CTRL_MASTER_MODE_M1RW |
+ COH901318_CX_CTRL_TCP_ENABLE |
+ COH901318_CX_CTRL_TC_IRQ_ENABLE |
+ COH901318_CX_CTRL_HSP_ENABLE |
+ COH901318_CX_CTRL_HSS_DISABLE |
+ COH901318_CX_CTRL_DDMA_LEGACY |
+ COH901318_CX_CTRL_PRDD_DEST,
+ },
+ {
+ .number = U300_DMA_XGAM_CDI,
+ .name = "XGAM CDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_XGAM_PDI,
+ .name = "XGAM PDI",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_TX,
+ .name = "SPI TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_SPI_RX,
+ .name = "SPI RX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_0,
+ .name = "GENERAL 00",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_1,
+ .name = "GENERAL 01",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_2,
+ .name = "GENERAL 02",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_3,
+ .name = "GENERAL 03",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_4,
+ .name = "GENERAL 04",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_5,
+ .name = "GENERAL 05",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_6,
+ .name = "GENERAL 06",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_7,
+ .name = "GENERAL 07",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_8,
+ .name = "GENERAL 08",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .number = U300_DMA_UART1_TX,
+ .name = "UART1 TX",
+ .priority_high = 0,
+ },
+ {
+ .number = U300_DMA_UART1_RX,
+ .name = "UART1 RX",
+ .priority_high = 0,
+ }
+#else
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_9,
+ .name = "GENERAL 09",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ },
+ {
+ .number = U300_DMA_GENERAL_PURPOSE_10,
+ .name = "GENERAL 10",
+ .priority_high = 0,
+
+ .param.config = flags_memcpy_config,
+ .param.ctrl_lli_chained = flags_memcpy_lli_chained,
+ .param.ctrl_lli = flags_memcpy_lli,
+ .param.ctrl_lli_last = flags_memcpy_lli_last,
+ }
+#endif
+};
+
+
+static struct coh901318_platform coh901318_platform = {
+ .chans_slave = dma_slave_channels,
+ .chans_memcpy = dma_memcpy_channels,
+ .access_memory_state = coh901318_access_memory_state,
+ .chan_conf = chan_config,
+ .max_channels = U300_DMA_CHANNELS,
+};
+
static struct platform_device wdog_device = {
- .name = "wdog",
+ .name = "coh901327_wdog",
.id = -1,
.num_resources = ARRAY_SIZE(wdog_resources),
.resource = wdog_resources,
@@ -428,11 +1441,23 @@
.resource = ave_resources,
};
+static struct platform_device dma_device = {
+ .name = "coh901318",
+ .id = -1,
+ .resource = dma_resource,
+ .num_resources = ARRAY_SIZE(dma_resource),
+ .dev = {
+ .platform_data = &coh901318_platform,
+ .coherent_dma_mask = ~0,
+ },
+};
+
/*
* Notice that AMBA devices are initialized before platform devices.
*
*/
static struct platform_device *platform_devs[] __initdata = {
+ &dma_device,
&i2c0_device,
&i2c1_device,
&keypad_device,
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 0b35826..5f61fd4 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -546,7 +546,7 @@
for (i = 0; i < U300_GPIO_MAX; i++) {
val = 0;
for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+ val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
local_irq_save(flags);
writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
local_irq_restore(flags);
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..ca4a028 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart,rx
+ .macro addruart, rx, tmp
/* If we move the adress using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h
new file mode 100644
index 0000000..b239149
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/dma_channels.h
@@ -0,0 +1,69 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0 0
+#define U300_DMA_MSL_TX_1 1
+#define U300_DMA_MSL_TX_2 2
+#define U300_DMA_MSL_TX_3 3
+#define U300_DMA_MSL_TX_4 4
+#define U300_DMA_MSL_TX_5 5
+#define U300_DMA_MSL_TX_6 6
+#define U300_DMA_MSL_RX_0 7
+#define U300_DMA_MSL_RX_1 8
+#define U300_DMA_MSL_RX_2 9
+#define U300_DMA_MSL_RX_3 10
+#define U300_DMA_MSL_RX_4 11
+#define U300_DMA_MSL_RX_5 12
+#define U300_DMA_MSL_RX_6 13
+#define U300_DMA_MMCSD_RX_TX 14
+#define U300_DMA_MSPRO_TX 15
+#define U300_DMA_MSPRO_RX 16
+#define U300_DMA_UART0_TX 17
+#define U300_DMA_UART0_RX 18
+#define U300_DMA_APEX_TX 19
+#define U300_DMA_APEX_RX 20
+#define U300_DMA_PCM_I2S0_TX 21
+#define U300_DMA_PCM_I2S0_RX 22
+#define U300_DMA_PCM_I2S1_TX 23
+#define U300_DMA_PCM_I2S1_RX 24
+#define U300_DMA_XGAM_CDI 25
+#define U300_DMA_XGAM_PDI 26
+#define U300_DMA_SPI_TX 27
+#define U300_DMA_SPI_RX 28
+#define U300_DMA_GENERAL_PURPOSE_0 29
+#define U300_DMA_GENERAL_PURPOSE_1 30
+#define U300_DMA_GENERAL_PURPOSE_2 31
+#define U300_DMA_GENERAL_PURPOSE_3 32
+#define U300_DMA_GENERAL_PURPOSE_4 33
+#define U300_DMA_GENERAL_PURPOSE_5 34
+#define U300_DMA_GENERAL_PURPOSE_6 35
+#define U300_DMA_GENERAL_PURPOSE_7 36
+#define U300_DMA_GENERAL_PURPOSE_8 37
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_UART1_TX 38
+#define U300_DMA_UART1_RX 39
+#else
+#define U300_DMA_GENERAL_PURPOSE_9 38
+#define U300_DMA_GENERAL_PURPOSE_10 39
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_DEVICE_CHANNELS 32
+#else
+#define U300_DMA_DEVICE_CHANNELS 30
+#endif
+#define U300_DMA_CHANNELS 40
+
+
+#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
index b00c51a..ec423b9 100644
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -9,4 +9,4 @@
* End must be above the I/O registers and on an even 2MiB boundary.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#define VMALLOC_END 0xfe800000
+#define VMALLOC_END 0xfe800000UL
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index aa5afbc..803aec1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,7 @@
#include <asm/mach/arch.h>
#include <plat/mtu.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -108,11 +109,96 @@
.periphid = SSP_PER_ID,
};
+static struct amba_device pl031_device = {
+ .dev = {
+ .init_name = "pl031",
+ },
+ .res = {
+ .start = U8500_RTC_BASE,
+ .end = U8500_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+#define U8500_I2C_RESOURCES(id, size) \
+static struct resource u8500_i2c_resources_##id[] = { \
+ [0] = { \
+ .start = U8500_I2C##id##_BASE, \
+ .end = U8500_I2C##id##_BASE + size - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ [1] = { \
+ .start = IRQ_I2C##id, \
+ .end = IRQ_I2C##id, \
+ .flags = IORESOURCE_IRQ \
+ } \
+}
+
+U8500_I2C_RESOURCES(0, SZ_4K);
+U8500_I2C_RESOURCES(1, SZ_4K);
+U8500_I2C_RESOURCES(2, SZ_4K);
+U8500_I2C_RESOURCES(3, SZ_4K);
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c_##id = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+
+#define U8500_I2C_PDEVICE(cid) \
+static struct platform_device i2c_controller##cid = { \
+ .name = "nmk-i2c", \
+ .id = cid, \
+ .num_resources = 2, \
+ .resource = u8500_i2c_resources_##cid, \
+ .dev = { \
+ .platform_data = &u8500_i2c_##cid \
+ } \
+}
+
+U8500_I2C_PDEVICE(0);
+U8500_I2C_PDEVICE(1);
+U8500_I2C_PDEVICE(2);
+U8500_I2C_PDEVICE(3);
+
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&pl022_device,
+ &pl031_device,
+};
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c_controller0,
+ &i2c_controller1,
+ &i2c_controller2,
+ &i2c_controller3,
};
static void __init u8500_timer_init(void)
@@ -139,6 +225,8 @@
for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
amba_device_register(amba_devs[i], &iomem_resource);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 20b6ebb..8359a73 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -85,11 +85,8 @@
static int __init clk_init(void)
{
- int i;
-
/* register the clock lookups */
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
index 5f05e58..397bc1f 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -33,6 +33,7 @@
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a..09cbfda 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,12 +8,13 @@
* published by the Free Software Foundation.
*
*/
- .macro addruart,rx
+#include <mach/hardware.h>
+
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @MMU enabled?
- moveq \rx, #0x80000000 @MMU off, Physical address
- movne \rx, #0xF0000000 @MMU on, Virtual address
- orr \rx, \rx, #0x7000
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =U8500_UART2_BASE @ no, physical address
+ ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
index 86cdbbc..a4945cb 100644
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -15,4 +15,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END 0xf0000000
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e13be7c..9ddb49b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -851,8 +851,7 @@
{
int i;
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
platform_device_register(&versatile_flash_device);
platform_device_register(&versatile_i2c_device);
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index b4ac00e..6fea719 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index b785994b..2c371ff 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -90,12 +90,3 @@
__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
}
-
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index f5816a0..c56ddab 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -14,7 +14,6 @@
void nuc900_clk_enable(struct clk *clk, int enable);
void nuc900_subclk_enable(struct clk *clk, int enable);
-void clks_register(struct clk_lookup *clks, size_t num);
struct clk {
unsigned long cken;
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 20dc0c9..642207e 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -45,6 +45,7 @@
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(GPIO),
};
/* Initial clock declarations. */
@@ -68,6 +69,11 @@
static DEFINE_CLK(adc, 28);
static DEFINE_CLK(usi, 29);
static DEFINE_CLK(ext, 0);
+static DEFINE_CLK(timer0, 19);
+static DEFINE_CLK(timer1, 20);
+static DEFINE_CLK(timer2, 21);
+static DEFINE_CLK(timer3, 22);
+static DEFINE_CLK(timer4, 23);
static struct clk_lookup nuc900_clkregs[] = {
DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
@@ -90,6 +96,11 @@
DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+ DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
+ DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
+ DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
+ DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
+ DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
};
/* Initial serial platform data */
@@ -208,6 +219,6 @@
void __init nuc900_init_clocks(void)
{
- clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+ clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
}
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
index 2f9dfb9..b067e44 100644
--- a/arch/arm/mach-w90x900/include/mach/vmalloc.h
+++ b/arch/arm/mach-w90x900/include/mach/vmalloc.h
@@ -18,6 +18,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xE0000000)
+#define VMALLOC_END (0xe0000000UL)
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index baf6384..c4ed9f9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -399,7 +399,7 @@
config CPU_32v6K
bool "Support ARM V6K processor extensions" if !SMP
depends on CPU_V6
- default y if SMP && !ARCH_MX3
+ default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
help
Say Y here if your ARMv6 processor supports the 'K' extension.
This enables the kernel to use some instructions not present
@@ -410,7 +410,7 @@
# ARMv7
config CPU_V7
bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
- select CPU_32v6K
+ select CPU_32v6K if !ARCH_OMAP2
select CPU_32v7
select CPU_ABRT_EV7
select CPU_PABRT_V7
@@ -754,7 +754,7 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
default y
select OUTER_CACHE
help
@@ -779,5 +779,5 @@
config ARM_L1_CACHE_SHIFT
int
- default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
+ default 6 if ARM_L1_CACHE_SHIFT_6
default 5
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 62820ed..edddd66 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -901,11 +901,7 @@
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *res;
- res = proc_mkdir("cpu", NULL);
- if (!res)
- return -ENOMEM;
-
- res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, res);
+ res = create_proc_entry("cpu/alignment", S_IWUSR | S_IRUGO, NULL);
if (!res)
return -ENOMEM;
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index a89444a..7148e53 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -157,7 +157,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_inv_range)
+fa_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
@@ -180,7 +180,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(fa_dma_clean_range)
+fa_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -205,6 +205,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq fa_dma_clean_range
+ bcs fa_dma_inv_range
+ b fa_dma_flush_range
+ENDPROC(fa_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(fa_dma_unmap_area)
+ mov pc, lr
+ENDPROC(fa_dma_unmap_area)
+
__INITDATA
.type fa_cache_fns, #object
@@ -215,7 +239,7 @@
.long fa_coherent_kern_range
.long fa_coherent_user_range
.long fa_flush_kern_dcache_area
- .long fa_dma_inv_range
- .long fa_dma_clean_range
+ .long fa_dma_map_area
+ .long fa_dma_unmap_area
.long fa_dma_flush_range
.size fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index cb8fc65..0733463 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -42,6 +42,57 @@
cache_wait(base + L2X0_CACHE_SYNC, 1);
}
+static inline void l2x0_clean_line(unsigned long addr)
+{
+ void __iomem *base = l2x0_base;
+ cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+ writel(addr, base + L2X0_CLEAN_LINE_PA);
+}
+
+static inline void l2x0_inv_line(unsigned long addr)
+{
+ void __iomem *base = l2x0_base;
+ cache_wait(base + L2X0_INV_LINE_PA, 1);
+ writel(addr, base + L2X0_INV_LINE_PA);
+}
+
+#ifdef CONFIG_PL310_ERRATA_588369
+static void debug_writel(unsigned long val)
+{
+ extern void omap_smc1(u32 fn, u32 arg);
+
+ /*
+ * Texas Instrument secure monitor api to modify the
+ * PL310 Debug Control Register.
+ */
+ omap_smc1(0x100, val);
+}
+
+static inline void l2x0_flush_line(unsigned long addr)
+{
+ void __iomem *base = l2x0_base;
+
+ /* Clean by PA followed by Invalidate by PA */
+ cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+ writel(addr, base + L2X0_CLEAN_LINE_PA);
+ cache_wait(base + L2X0_INV_LINE_PA, 1);
+ writel(addr, base + L2X0_INV_LINE_PA);
+}
+#else
+
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
+}
+
+static inline void l2x0_flush_line(unsigned long addr)
+{
+ void __iomem *base = l2x0_base;
+ cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+ writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
+}
+#endif
+
static inline void l2x0_inv_all(void)
{
unsigned long flags;
@@ -62,23 +113,24 @@
spin_lock_irqsave(&l2x0_lock, flags);
if (start & (CACHE_LINE_SIZE - 1)) {
start &= ~(CACHE_LINE_SIZE - 1);
- cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
- writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+ debug_writel(0x03);
+ l2x0_flush_line(start);
+ debug_writel(0x00);
start += CACHE_LINE_SIZE;
}
if (end & (CACHE_LINE_SIZE - 1)) {
end &= ~(CACHE_LINE_SIZE - 1);
- cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
- writel(end, base + L2X0_CLEAN_INV_LINE_PA);
+ debug_writel(0x03);
+ l2x0_flush_line(end);
+ debug_writel(0x00);
}
while (start < end) {
unsigned long blk_end = start + min(end - start, 4096UL);
while (start < blk_end) {
- cache_wait(base + L2X0_INV_LINE_PA, 1);
- writel(start, base + L2X0_INV_LINE_PA);
+ l2x0_inv_line(start);
start += CACHE_LINE_SIZE;
}
@@ -103,8 +155,7 @@
unsigned long blk_end = start + min(end - start, 4096UL);
while (start < blk_end) {
- cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
- writel(start, base + L2X0_CLEAN_LINE_PA);
+ l2x0_clean_line(start);
start += CACHE_LINE_SIZE;
}
@@ -128,11 +179,12 @@
while (start < end) {
unsigned long blk_end = start + min(end - start, 4096UL);
+ debug_writel(0x03);
while (start < blk_end) {
- cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
- writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+ l2x0_flush_line(start);
start += CACHE_LINE_SIZE;
}
+ debug_writel(0x00);
if (blk_end < end) {
spin_unlock_irqrestore(&l2x0_lock, flags);
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 2a48273..c2ff3c5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -84,20 +84,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -108,18 +94,29 @@
ENTRY(v3_dma_flush_range)
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v3_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v3_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v3_dma_clean_range)
+ENTRY(v3_dma_map_area)
mov pc, lr
+ENDPROC(v3_dma_unmap_area)
+ENDPROC(v3_dma_map_area)
__INITDATA
@@ -131,7 +128,7 @@
.long v3_coherent_kern_range
.long v3_coherent_user_range
.long v3_flush_kern_dcache_area
- .long v3_dma_inv_range
- .long v3_dma_clean_range
+ .long v3_dma_map_area
+ .long v3_dma_unmap_area
.long v3_dma_flush_range
.size v3_cache_fns, . - v3_cache_fns
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 5c7da3e..4810f7e 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -94,20 +94,6 @@
/* FALLTHROUGH */
/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4_dma_inv_range)
- /* FALLTHROUGH */
-
-/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -120,18 +106,29 @@
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
#endif
+ mov pc, lr
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4_dma_unmap_area)
+ teq r2, #DMA_TO_DEVICE
+ bne v4_dma_flush_range
/* FALLTHROUGH */
/*
- * dma_clean_range(start, end)
- *
- * Clean (write back) the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
*/
-ENTRY(v4_dma_clean_range)
+ENTRY(v4_dma_map_area)
mov pc, lr
+ENDPROC(v4_dma_unmap_area)
+ENDPROC(v4_dma_map_area)
__INITDATA
@@ -143,7 +140,7 @@
.long v4_coherent_kern_range
.long v4_coherent_user_range
.long v4_flush_kern_dcache_area
- .long v4_dma_inv_range
- .long v4_dma_clean_range
+ .long v4_dma_map_area
+ .long v4_dma_unmap_area
.long v4_dma_flush_range
.size v4_cache_fns, . - v4_cache_fns
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 3dbedf1e..df8368a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -173,7 +173,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_inv_range)
+v4wb_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -194,7 +194,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wb_dma_clean_range)
+v4wb_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -216,6 +216,30 @@
.globl v4wb_dma_flush_range
.set v4wb_dma_flush_range, v4wb_coherent_kern_range
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq v4wb_dma_clean_range
+ bcs v4wb_dma_inv_range
+ b v4wb_dma_flush_range
+ENDPROC(v4wb_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wb_dma_unmap_area)
+ mov pc, lr
+ENDPROC(v4wb_dma_unmap_area)
+
__INITDATA
.type v4wb_cache_fns, #object
@@ -226,7 +250,7 @@
.long v4wb_coherent_kern_range
.long v4wb_coherent_user_range
.long v4wb_flush_kern_dcache_area
- .long v4wb_dma_inv_range
- .long v4wb_dma_clean_range
+ .long v4wb_dma_map_area
+ .long v4wb_dma_unmap_area
.long v4wb_dma_flush_range
.size v4wb_cache_fns, . - v4wb_cache_fns
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index b3b7410..45c7031 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -142,23 +142,12 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(v4wt_dma_inv_range)
+v4wt_dma_inv_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
- /* FALLTHROUGH */
-
-/*
- * dma_clean_range(start, end)
- *
- * Clean the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v4wt_dma_clean_range)
mov pc, lr
/*
@@ -172,6 +161,29 @@
.globl v4wt_dma_flush_range
.equ v4wt_dma_flush_range, v4wt_dma_inv_range
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v4wt_dma_inv_range
+ /* FALLTHROUGH */
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v4wt_dma_map_area)
+ mov pc, lr
+ENDPROC(v4wt_dma_unmap_area)
+ENDPROC(v4wt_dma_map_area)
+
__INITDATA
.type v4wt_cache_fns, #object
@@ -182,7 +194,7 @@
.long v4wt_coherent_kern_range
.long v4wt_coherent_user_range
.long v4wt_flush_kern_dcache_area
- .long v4wt_dma_inv_range
- .long v4wt_dma_clean_range
+ .long v4wt_dma_map_area
+ .long v4wt_dma_unmap_area
.long v4wt_dma_flush_range
.size v4wt_cache_fns, . - v4wt_cache_fns
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 4ba0a24..9d89c67 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -195,7 +195,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_inv_range)
+v6_dma_inv_range:
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -228,7 +228,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v6_dma_clean_range)
+v6_dma_clean_range:
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
@@ -263,6 +263,32 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v6_dma_inv_range
+ b v6_dma_clean_range
+ENDPROC(v6_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v6_dma_inv_range
+ mov pc, lr
+ENDPROC(v6_dma_unmap_area)
+
__INITDATA
.type v6_cache_fns, #object
@@ -273,7 +299,7 @@
.long v6_coherent_kern_range
.long v6_coherent_user_range
.long v6_flush_kern_dcache_area
- .long v6_dma_inv_range
- .long v6_dma_clean_range
+ .long v6_dma_map_area
+ .long v6_dma_unmap_area
.long v6_dma_flush_range
.size v6_cache_fns, . - v6_cache_fns
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 9073db8..bcd64f2 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -216,7 +216,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
@@ -240,7 +240,7 @@
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
@@ -271,6 +271,32 @@
mov pc, lr
ENDPROC(v7_dma_flush_range)
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v7_dma_inv_range
+ b v7_dma_clean_range
+ENDPROC(v7_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v7_dma_inv_range
+ mov pc, lr
+ENDPROC(v7_dma_unmap_area)
+
__INITDATA
.type v7_cache_fns, #object
@@ -281,7 +307,7 @@
.long v7_coherent_kern_range
.long v7_coherent_user_range
.long v7_flush_kern_dcache_area
- .long v7_dma_inv_range
- .long v7_dma_clean_range
+ .long v7_dma_map_area
+ .long v7_dma_unmap_area
.long v7_dma_flush_range
.size v7_cache_fns, . - v7_cache_fns
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index a9e22e3..b0ee9ba 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -10,12 +10,17 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
static DEFINE_SPINLOCK(cpu_asid_lock);
unsigned int cpu_last_asid = ASID_FIRST_VERSION;
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(struct mm_struct *, current_mm);
+#endif
/*
* We fork()ed a process, and we need a new context for the child
@@ -26,13 +31,109 @@
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
mm->context.id = 0;
+ spin_lock_init(&mm->context.id_lock);
}
+static void flush_context(void)
+{
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+ isb();
+ local_flush_tlb_all();
+ if (icache_is_vivt_asid_tagged()) {
+ __flush_icache_all();
+ dsb();
+ }
+}
+
+#ifdef CONFIG_SMP
+
+static void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+ unsigned long flags;
+
+ /*
+ * Locking needed for multi-threaded applications where the
+ * same mm->context.id could be set from different CPUs during
+ * the broadcast. This function is also called via IPI so the
+ * mm->context.id_lock has to be IRQ-safe.
+ */
+ spin_lock_irqsave(&mm->context.id_lock, flags);
+ if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) {
+ /*
+ * Old version of ASID found. Set the new one and
+ * reset mm_cpumask(mm).
+ */
+ mm->context.id = asid;
+ cpumask_clear(mm_cpumask(mm));
+ }
+ spin_unlock_irqrestore(&mm->context.id_lock, flags);
+
+ /*
+ * Set the mm_cpumask(mm) bit for the current CPU.
+ */
+ cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+}
+
+/*
+ * Reset the ASID on the current CPU. This function call is broadcast
+ * from the CPU handling the ASID rollover and holding cpu_asid_lock.
+ */
+static void reset_context(void *info)
+{
+ unsigned int asid;
+ unsigned int cpu = smp_processor_id();
+ struct mm_struct *mm = per_cpu(current_mm, cpu);
+
+ /*
+ * Check if a current_mm was set on this CPU as it might still
+ * be in the early booting stages and using the reserved ASID.
+ */
+ if (!mm)
+ return;
+
+ smp_rmb();
+ asid = cpu_last_asid + cpu + 1;
+
+ flush_context();
+ set_mm_context(mm, asid);
+
+ /* set the new ASID */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+ isb();
+}
+
+#else
+
+static inline void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+ mm->context.id = asid;
+ cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
+}
+
+#endif
+
void __new_context(struct mm_struct *mm)
{
unsigned int asid;
spin_lock(&cpu_asid_lock);
+#ifdef CONFIG_SMP
+ /*
+ * Check the ASID again, in case the change was broadcast from
+ * another CPU before we acquired the lock.
+ */
+ if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) {
+ cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+ spin_unlock(&cpu_asid_lock);
+ return;
+ }
+#endif
+ /*
+ * At this point, it is guaranteed that the current mm (with
+ * an old ASID) isn't active on any other CPU since the ASIDs
+ * are changed simultaneously via IPI.
+ */
asid = ++cpu_last_asid;
if (asid == 0)
asid = cpu_last_asid = ASID_FIRST_VERSION;
@@ -42,20 +143,15 @@
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = ++cpu_last_asid;
- /* set the reserved ASID before flushing the TLB */
- asm("mcr p15, 0, %0, c13, c0, 1 @ set reserved context ID\n"
- :
- : "r" (0));
- isb();
- flush_tlb_all();
- if (icache_is_vivt_asid_tagged()) {
- __flush_icache_all();
- dsb();
- }
+ asid = cpu_last_asid + smp_processor_id() + 1;
+ flush_context();
+#ifdef CONFIG_SMP
+ smp_wmb();
+ smp_call_function(reset_context, NULL, 1);
+#endif
+ cpu_last_asid += NR_CPUS;
}
- spin_unlock(&cpu_asid_lock);
- cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
- mm->context.id = asid;
+ set_mm_context(mm, asid);
+ spin_unlock(&cpu_asid_lock);
}
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 70997d5..5eb4fd9 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -68,12 +68,13 @@
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
feroceon_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index de9c068..f72303e 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -38,7 +38,7 @@
}
void v3_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7370a71..598c51a 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -69,7 +69,7 @@
}
void v4_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 9ab0984..7c2eb55 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -48,12 +48,13 @@
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
v4wb_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 300efaf..172e6a5 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -44,7 +44,7 @@
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 0fa1319..8bca4de 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -34,7 +34,7 @@
* attack the kernel's existing mapping of these pages.
*/
static void v6_copy_user_highpage_nonaliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
@@ -81,7 +81,7 @@
* Copy the page, taking account of the cache colour.
*/
static void v6_copy_user_highpage_aliasing(struct page *to,
- struct page *from, unsigned long vaddr)
+ struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
{
unsigned int offset = CACHE_COLOUR(vaddr);
unsigned long kfrom, kto;
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index bc4525f..747ad41 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -71,12 +71,13 @@
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto, *kfrom;
kto = kmap_atomic(to, KM_USER0);
kfrom = kmap_atomic(from, KM_USER1);
+ flush_cache_page(vma, vaddr, page_to_pfn(from));
xsc3_mc_copy_user_page(kto, kfrom);
kunmap_atomic(kfrom, KM_USER1);
kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 76824d3..9920c0a 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -91,7 +91,7 @@
}
void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr)
+ unsigned long vaddr, struct vm_area_struct *vma)
{
void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 26325cb..0da7ecc 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -29,9 +29,6 @@
#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
#endif
-#define CONSISTENT_END (0xffe00000)
-#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
-
#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
@@ -404,78 +401,44 @@
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void dma_cache_maint(const void *start, size_t size, int direction)
+void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
{
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
-
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
-
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
-
- inner_op(start, start + size);
- outer_op(__pa(start), __pa(start) + size);
-}
-EXPORT_SYMBOL(dma_cache_maint);
-
-static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
- void *vaddr;
unsigned long paddr;
- void (*inner_op)(const void *, const void *);
- void (*outer_op)(unsigned long, unsigned long);
- switch (direction) {
- case DMA_FROM_DEVICE: /* invalidate only */
- inner_op = dmac_inv_range;
- outer_op = outer_inv_range;
- break;
- case DMA_TO_DEVICE: /* writeback only */
- inner_op = dmac_clean_range;
- outer_op = outer_clean_range;
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- inner_op = dmac_flush_range;
- outer_op = outer_flush_range;
- break;
- default:
- BUG();
- }
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
- if (!PageHighMem(page)) {
- vaddr = page_address(page) + offset;
- inner_op(vaddr, vaddr + size);
+ dmac_map_area(kaddr, size, dir);
+
+ paddr = __pa(kaddr);
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
} else {
- vaddr = kmap_high_get(page);
- if (vaddr) {
- vaddr += offset;
- inner_op(vaddr, vaddr + size);
- kunmap_high(page);
- }
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_single_cpu_to_dev);
+
+void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE) {
+ unsigned long paddr = __pa(kaddr);
+ outer_inv_range(paddr, paddr + size);
}
- paddr = page_to_phys(page) + offset;
- outer_op(paddr, paddr + size);
+ dmac_unmap_area(kaddr, size, dir);
}
+EXPORT_SYMBOL(___dma_single_dev_to_cpu);
-void dma_cache_maint_page(struct page *page, unsigned long offset,
- size_t size, int dir)
+static void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction dir,
+ void (*op)(const void *, size_t, int))
{
/*
* A single sg entry may refer to multiple physically contiguous
@@ -486,20 +449,62 @@
size_t left = size;
do {
size_t len = left;
- if (PageHighMem(page) && len + offset > PAGE_SIZE) {
- if (offset >= PAGE_SIZE) {
- page += offset / PAGE_SIZE;
- offset %= PAGE_SIZE;
+ void *vaddr;
+
+ if (PageHighMem(page)) {
+ if (len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
}
- len = PAGE_SIZE - offset;
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ op(vaddr, len, dir);
+ kunmap_high(page);
+ }
+ } else {
+ vaddr = page_address(page) + offset;
+ op(vaddr, len, dir);
}
- dma_cache_maint_contiguous(page, offset, len, dir);
offset = 0;
page++;
left -= len;
} while (left);
}
-EXPORT_SYMBOL(dma_cache_maint_page);
+
+void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr;
+
+ dma_cache_maint_page(page, off, size, dir, dmac_map_area);
+
+ paddr = page_to_phys(page) + off;
+ if (dir == DMA_FROM_DEVICE) {
+ outer_inv_range(paddr, paddr + size);
+ } else {
+ outer_clean_range(paddr, paddr + size);
+ }
+ /* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_page_cpu_to_dev);
+
+void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+ size_t size, enum dma_data_direction dir)
+{
+ unsigned long paddr = page_to_phys(page) + off;
+
+ /* FIXME: non-speculating: not required */
+ /* don't bother invalidating if DMA to device */
+ if (dir != DMA_TO_DEVICE)
+ outer_inv_range(paddr, paddr + size);
+
+ dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+}
+EXPORT_SYMBOL(___dma_page_dev_to_cpu);
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
@@ -573,8 +578,12 @@
int i;
for_each_sg(sg, s, nents, i) {
- dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
- sg_dma_len(s), dir);
+ if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+ sg_dma_len(s), dir))
+ continue;
+
+ __dma_page_dev_to_cpu(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
@@ -597,9 +606,8 @@
sg_dma_len(s), dir))
continue;
- if (!arch_is_coherent())
- dma_cache_maint_page(sg_page(s), s->offset,
- s->length, dir);
+ __dma_page_cpu_to_dev(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 56ee153..c9b97e9 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -36,28 +36,12 @@
* Therefore those configurations which might call adjust_pte (those
* without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
*/
-static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
+static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn, pte_t *ptep)
{
- pgd_t *pgd;
- pmd_t *pmd;
- pte_t *pte, entry;
+ pte_t entry = *ptep;
int ret;
- pgd = pgd_offset(vma->vm_mm, address);
- if (pgd_none(*pgd))
- goto no_pgd;
- if (pgd_bad(*pgd))
- goto bad_pgd;
-
- pmd = pmd_offset(pgd, address);
- if (pmd_none(*pmd))
- goto no_pmd;
- if (pmd_bad(*pmd))
- goto bad_pmd;
-
- pte = pte_offset_map(pmd, address);
- entry = *pte;
-
/*
* If this page is present, it's actually being shared.
*/
@@ -68,33 +52,55 @@
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
- unsigned long pfn = pte_pfn(entry);
flush_cache_page(vma, address, pfn);
outer_flush_range((pfn << PAGE_SHIFT),
(pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
- set_pte_at(vma->vm_mm, address, pte, entry);
+ set_pte_at(vma->vm_mm, address, ptep, entry);
flush_tlb_page(vma, address);
}
- pte_unmap(pte);
+
return ret;
+}
-bad_pgd:
- pgd_ERROR(*pgd);
- pgd_clear(pgd);
-no_pgd:
- return 0;
+static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn)
+{
+ spinlock_t *ptl;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int ret;
-bad_pmd:
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
-no_pmd:
- return 0;
+ pgd = pgd_offset(vma->vm_mm, address);
+ if (pgd_none_or_clear_bad(pgd))
+ return 0;
+
+ pmd = pmd_offset(pgd, address);
+ if (pmd_none_or_clear_bad(pmd))
+ return 0;
+
+ /*
+ * This is called while another page table is mapped, so we
+ * must use the nested version. This also means we need to
+ * open-code the spin-locking.
+ */
+ ptl = pte_lockptr(vma->vm_mm, pmd);
+ pte = pte_offset_map_nested(pmd, address);
+ spin_lock(ptl);
+
+ ret = do_adjust_pte(vma, address, pfn, pte);
+
+ spin_unlock(ptl);
+ pte_unmap_nested(pte);
+
+ return ret;
}
static void
-make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep, unsigned long pfn)
{
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *mpnt;
@@ -122,11 +128,11 @@
if (!(mpnt->vm_flags & VM_MAYSHARE))
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
- aliases += adjust_pte(mpnt, mpnt->vm_start + offset);
+ aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
}
flush_dcache_mmap_unlock(mapping);
if (aliases)
- adjust_pte(vma, addr);
+ do_adjust_pte(vma, addr, pfn, ptep);
else
flush_cache_page(vma, addr, pfn);
}
@@ -144,9 +150,10 @@
*
* Note that the pte lock will be held.
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct address_space *mapping;
struct page *page;
@@ -168,7 +175,7 @@
#endif
if (mapping) {
if (cache_is_vivt())
- make_coherent(mapping, vma, addr, pfn);
+ make_coherent(mapping, vma, addr, ptep, pfn);
else if (vma->vm_flags & VM_EXEC)
__flush_icache_all();
}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 10e0680..9d40c34 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -18,6 +18,7 @@
#include <linux/page-flags.h>
#include <linux/sched.h>
#include <linux/highmem.h>
+#include <linux/perf_event.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -302,6 +303,12 @@
fault = __do_page_fault(mm, addr, fsr, tsk);
up_read(&mm->mmap_sem);
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, addr);
+ if (fault & VM_FAULT_MAJOR)
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, addr);
+ else if (fault & VM_FAULT_MINOR)
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, addr);
+
/*
* Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
*/
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 6f3a4b7..e34f095 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,7 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -87,13 +88,26 @@
if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
__flush_icache_all();
}
+#else
+#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+#endif
+#ifdef CONFIG_SMP
+static void flush_ptrace_access_other(void *args)
+{
+ __flush_icache_all();
+}
+#endif
+
+static
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
- unsigned long uaddr, void *kaddr,
- unsigned long len, int write)
+ unsigned long uaddr, void *kaddr, unsigned long len)
{
if (cache_is_vivt()) {
- vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ unsigned long addr = (unsigned long)kaddr;
+ __cpuc_coherent_kern_range(addr, addr + len);
+ }
return;
}
@@ -104,16 +118,37 @@
}
/* VIPT non-aliasing cache */
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
- vma->vm_flags & VM_EXEC) {
+ if (vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
- /* only flushing the kernel mapping on non-aliasing VIPT */
__cpuc_coherent_kern_range(addr, addr + len);
+#ifdef CONFIG_SMP
+ if (cache_ops_need_broadcast())
+ smp_call_function(flush_ptrace_access_other,
+ NULL, 1);
+#endif
}
}
-#else
-#define flush_pfn_alias(pfn,vaddr) do { } while (0)
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *dst, const void *src,
+ unsigned long len)
+{
+#ifdef CONFIG_SMP
+ preempt_disable();
#endif
+ memcpy(dst, src, len);
+ flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+ preempt_enable();
+#endif
+}
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index a04ffbb..7829cb5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -23,6 +23,7 @@
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/fixmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,19 +33,21 @@
static unsigned long phys_initrd_start __initdata = 0;
static unsigned long phys_initrd_size __initdata = 0;
-static void __init early_initrd(char **p)
+static int __init early_initrd(char *p)
{
unsigned long start, size;
+ char *endp;
- start = memparse(*p, p);
- if (**p == ',') {
- size = memparse((*p) + 1, p);
+ start = memparse(p, &endp);
+ if (*endp == ',') {
+ size = memparse(endp + 1, NULL);
phys_initrd_start = start;
phys_initrd_size = size;
}
+ return 0;
}
-__early_param("initrd=", early_initrd);
+early_param("initrd", early_initrd);
static int __init parse_tag_initrd(const struct tag *tag)
{
@@ -560,7 +563,7 @@
*/
void __init mem_init(void)
{
- unsigned int codesize, datasize, initsize;
+ unsigned long reserved_pages, free_pages;
int i, node;
#ifndef CONFIG_DISCONTIGMEM
@@ -596,6 +599,33 @@
totalram_pages += totalhigh_pages;
#endif
+ reserved_pages = free_pages = 0;
+
+ for_each_online_node(node) {
+ pg_data_t *n = NODE_DATA(node);
+ struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
+
+ for_each_nodebank(i, &meminfo, node) {
+ struct membank *bank = &meminfo.bank[i];
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
+
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
+
+ page = map + pfn1;
+ end = map + pfn2;
+
+ do {
+ if (PageReserved(page))
+ reserved_pages++;
+ else if (!page_count(page))
+ free_pages++;
+ page++;
+ } while (page < end);
+ }
+ }
+
/*
* Since our memory may not be contiguous, calculate the
* real number of pages we have in this system
@@ -608,16 +638,71 @@
}
printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
- codesize = _etext - _text;
- datasize = _end - _data;
- initsize = __init_end - __init_begin;
-
- printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
- "%dK data, %dK init, %luK highmem)\n",
- nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
- datasize >> 10, initsize >> 10,
+ printk(KERN_NOTICE "Memory: %luk/%luk available, %luk reserved, %luK highmem\n",
+ nr_free_pages() << (PAGE_SHIFT-10),
+ free_pages << (PAGE_SHIFT-10),
+ reserved_pages << (PAGE_SHIFT-10),
totalhigh_pages << (PAGE_SHIFT-10));
+#define MLK(b, t) b, t, ((t) - (b)) >> 10
+#define MLM(b, t) b, t, ((t) - (b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
+
+ printk(KERN_NOTICE "Virtual kernel memory layout:\n"
+ " vector : 0x%08lx - 0x%08lx (%4ld kB)\n"
+ " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
+#ifdef CONFIG_MMU
+ " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n"
+#endif
+ " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
+#ifdef CONFIG_HIGHMEM
+ " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n"
+#endif
+ " modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .text : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+
+ MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
+ (PAGE_SIZE)),
+ MLK(FIXADDR_START, FIXADDR_TOP),
+#ifdef CONFIG_MMU
+ MLM(CONSISTENT_BASE, CONSISTENT_END),
+#endif
+ MLM(VMALLOC_START, VMALLOC_END),
+ MLM(PAGE_OFFSET, (unsigned long)high_memory),
+#ifdef CONFIG_HIGHMEM
+ MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) *
+ (PAGE_SIZE)),
+#endif
+ MLM(MODULES_VADDR, MODULES_END),
+
+ MLK_ROUNDUP(__init_begin, __init_end),
+ MLK_ROUNDUP(_text, _etext),
+ MLK_ROUNDUP(_data, _edata));
+
+#undef MLK
+#undef MLM
+#undef MLK_ROUNDUP
+
+ /*
+ * Check boundaries twice: Some fundamental inconsistencies can
+ * be detected at build time already.
+ */
+#ifdef CONFIG_MMU
+ BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
+ BUG_ON(VMALLOC_END > CONSISTENT_BASE);
+
+ BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
+ BUG_ON(TASK_SIZE > MODULES_VADDR);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+ BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
+ BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
+#endif
+
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
/*
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 0ab75c6..28c8b95 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -139,8 +139,8 @@
* which requires the new ioremap'd region to be referenced, the CPU will
* reference the _old_ region.
*
- * Note that get_vm_area() allocates a guard 4K page, so we need to mask
- * the size back to 1MB aligned or we will overflow in the loop below.
+ * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
+ * mask the size back to 1MB aligned or we will overflow in the loop below.
*/
static void unmap_area_sections(unsigned long virt, unsigned long size)
{
@@ -254,22 +254,8 @@
}
#endif
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- *
- * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping. See <asm/pgtable.h> for more information.
- */
-void __iomem *
-__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
- unsigned int mtype)
+void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
+ unsigned long offset, size_t size, unsigned int mtype, void *caller)
{
const struct mem_type *type;
int err;
@@ -291,7 +277,7 @@
*/
size = PAGE_ALIGN(offset + size);
- area = get_vm_area(size, VM_IOREMAP);
+ area = get_vm_area_caller(size, VM_IOREMAP, caller);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
@@ -318,10 +304,9 @@
flush_cache_vmap(addr, addr + size);
return (void __iomem *) (offset + addr);
}
-EXPORT_SYMBOL(__arm_ioremap_pfn);
-void __iomem *
-__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+ unsigned int mtype, void *caller)
{
unsigned long last_addr;
unsigned long offset = phys_addr & ~PAGE_MASK;
@@ -334,7 +319,33 @@
if (!size || last_addr < phys_addr)
return NULL;
- return __arm_ioremap_pfn(pfn, offset, size, mtype);
+ return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
+ caller);
+}
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem *
+__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
+ unsigned int mtype)
+{
+ return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(__arm_ioremap_pfn);
+
+void __iomem *
+__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+ return __arm_ioremap_caller(phys_addr, size, mtype,
+ __builtin_return_address(0));
}
EXPORT_SYMBOL(__arm_ioremap);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 761ffed..9d4da6a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -100,18 +100,17 @@
* writebuffer to be turned off. (Note: the write
* buffer should not be on and the cache off).
*/
-static void __init early_cachepolicy(char **p)
+static int __init early_cachepolicy(char *p)
{
int i;
for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
int len = strlen(cache_policies[i].policy);
- if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+ if (memcmp(p, cache_policies[i].policy, len) == 0) {
cachepolicy = i;
cr_alignment &= ~cache_policies[i].cr_mask;
cr_no_alignment &= ~cache_policies[i].cr_mask;
- *p += len;
break;
}
}
@@ -130,36 +129,37 @@
}
flush_cache_all();
set_cr(cr_alignment);
+ return 0;
}
-__early_param("cachepolicy=", early_cachepolicy);
+early_param("cachepolicy", early_cachepolicy);
-static void __init early_nocache(char **__unused)
+static int __init early_nocache(char *__unused)
{
char *p = "buffered";
printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
- early_cachepolicy(&p);
+ early_cachepolicy(p);
+ return 0;
}
-__early_param("nocache", early_nocache);
+early_param("nocache", early_nocache);
-static void __init early_nowrite(char **__unused)
+static int __init early_nowrite(char *__unused)
{
char *p = "uncached";
printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
- early_cachepolicy(&p);
+ early_cachepolicy(p);
+ return 0;
}
-__early_param("nowb", early_nowrite);
+early_param("nowb", early_nowrite);
-static void __init early_ecc(char **p)
+static int __init early_ecc(char *p)
{
- if (memcmp(*p, "on", 2) == 0) {
+ if (memcmp(p, "on", 2) == 0)
ecc_mask = PMD_PROTECTION;
- *p += 2;
- } else if (memcmp(*p, "off", 3) == 0) {
+ else if (memcmp(p, "off", 3) == 0)
ecc_mask = 0;
- *p += 3;
- }
+ return 0;
}
-__early_param("ecc=", early_ecc);
+early_param("ecc", early_ecc);
static int __init noalign_setup(char *__unused)
{
@@ -670,9 +670,9 @@
* bytes. This can be used to increase (or decrease) the vmalloc
* area - the default is 128m.
*/
-static void __init early_vmalloc(char **arg)
+static int __init early_vmalloc(char *arg)
{
- vmalloc_reserve = memparse(*arg, arg);
+ vmalloc_reserve = memparse(arg, NULL);
if (vmalloc_reserve < SZ_16M) {
vmalloc_reserve = SZ_16M;
@@ -687,8 +687,9 @@
"vmalloc area is too big, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
+ return 0;
}
-__early_param("vmalloc=", early_vmalloc);
+early_param("vmalloc", early_vmalloc);
#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 374a831..9bfeb6b 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -74,6 +74,12 @@
}
EXPORT_SYMBOL(__arm_ioremap_pfn);
+void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
+ size_t size, unsigned int mtype, void *caller)
+{
+ return __arm_ioremap_pfn(pfn, offset, size, mtype);
+}
+
void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
unsigned int mtype)
{
@@ -81,6 +87,12 @@
}
EXPORT_SYMBOL(__arm_ioremap);
+void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
+ unsigned int mtype, void *caller)
+{
+ return __arm_ioremap(phys_addr, size, mtype);
+}
+
void __iounmap(volatile void __iomem *addr)
{
}
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 8012e24..72507c6 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -265,7 +265,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_inv_range)
+arm1020_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -295,7 +295,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020_dma_clean_range)
+arm1020_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -330,6 +330,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020_dma_clean_range
+ bcs arm1020_dma_inv_range
+ b arm1020_dma_flush_range
+ENDPROC(arm1020_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020_dma_unmap_area)
+
ENTRY(arm1020_cache_fns)
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
@@ -337,8 +361,8 @@
.long arm1020_coherent_kern_range
.long arm1020_coherent_user_range
.long arm1020_flush_kern_dcache_area
- .long arm1020_dma_inv_range
- .long arm1020_dma_clean_range
+ .long arm1020_dma_map_area
+ .long arm1020_dma_unmap_area
.long arm1020_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 41fe25d..d278298 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -258,7 +258,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_inv_range)
+arm1020e_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -284,7 +284,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1020e_dma_clean_range)
+arm1020e_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -316,6 +316,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1020e_dma_clean_range
+ bcs arm1020e_dma_inv_range
+ b arm1020e_dma_flush_range
+ENDPROC(arm1020e_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1020e_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1020e_dma_unmap_area)
+
ENTRY(arm1020e_cache_fns)
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
@@ -323,8 +347,8 @@
.long arm1020e_coherent_kern_range
.long arm1020e_coherent_user_range
.long arm1020e_flush_kern_dcache_area
- .long arm1020e_dma_inv_range
- .long arm1020e_dma_clean_range
+ .long arm1020e_dma_map_area
+ .long arm1020e_dma_unmap_area
.long arm1020e_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 20a5b1b..ce13e4a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -247,7 +247,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_inv_range)
+arm1022_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -273,7 +273,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1022_dma_clean_range)
+arm1022_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -305,6 +305,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1022_dma_clean_range
+ bcs arm1022_dma_inv_range
+ b arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1022_dma_unmap_area)
+
ENTRY(arm1022_cache_fns)
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
@@ -312,8 +336,8 @@
.long arm1022_coherent_kern_range
.long arm1022_coherent_user_range
.long arm1022_flush_kern_dcache_area
- .long arm1022_dma_inv_range
- .long arm1022_dma_clean_range
+ .long arm1022_dma_map_area
+ .long arm1022_dma_unmap_area
.long arm1022_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 96aedb1..636672a 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_inv_range)
+arm1026_dma_inv_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
tst r0, #CACHE_DLINESIZE - 1
@@ -267,7 +267,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm1026_dma_clean_range)
+arm1026_dma_clean_range:
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CACHE_DLINESIZE - 1
@@ -299,6 +299,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm1026_dma_clean_range
+ bcs arm1026_dma_inv_range
+ b arm1026_dma_flush_range
+ENDPROC(arm1026_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm1026_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm1026_dma_unmap_area)
+
ENTRY(arm1026_cache_fns)
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
@@ -306,8 +330,8 @@
.long arm1026_coherent_kern_range
.long arm1026_coherent_user_range
.long arm1026_flush_kern_dcache_area
- .long arm1026_dma_inv_range
- .long arm1026_dma_clean_range
+ .long arm1026_dma_map_area
+ .long arm1026_dma_unmap_area
.long arm1026_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 471669e..8be8199 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -239,7 +239,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_inv_range)
+arm920_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -262,7 +262,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm920_dma_clean_range)
+arm920_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -288,6 +288,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm920_dma_clean_range
+ bcs arm920_dma_inv_range
+ b arm920_dma_flush_range
+ENDPROC(arm920_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm920_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm920_dma_unmap_area)
+
ENTRY(arm920_cache_fns)
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
@@ -295,8 +319,8 @@
.long arm920_coherent_kern_range
.long arm920_coherent_user_range
.long arm920_flush_kern_dcache_area
- .long arm920_dma_inv_range
- .long arm920_dma_clean_range
+ .long arm920_dma_map_area
+ .long arm920_dma_unmap_area
.long arm920_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index ee111b0..c0ff8e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_inv_range)
+arm922_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -264,7 +264,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm922_dma_clean_range)
+arm922_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -290,6 +290,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm922_dma_clean_range
+ bcs arm922_dma_inv_range
+ b arm922_dma_flush_range
+ENDPROC(arm922_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm922_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm922_dma_unmap_area)
+
ENTRY(arm922_cache_fns)
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
@@ -297,8 +321,8 @@
.long arm922_coherent_kern_range
.long arm922_coherent_user_range
.long arm922_flush_kern_dcache_area
- .long arm922_dma_inv_range
- .long arm922_dma_clean_range
+ .long arm922_dma_map_area
+ .long arm922_dma_unmap_area
.long arm922_dma_flush_range
#endif
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 8deb5bd..3c6cffe 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -283,7 +283,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_inv_range)
+arm925_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -308,7 +308,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm925_dma_clean_range)
+arm925_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -341,6 +341,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm925_dma_clean_range
+ bcs arm925_dma_inv_range
+ b arm925_dma_flush_range
+ENDPROC(arm925_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm925_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm925_dma_unmap_area)
+
ENTRY(arm925_cache_fns)
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
@@ -348,8 +372,8 @@
.long arm925_coherent_kern_range
.long arm925_coherent_user_range
.long arm925_flush_kern_dcache_area
- .long arm925_dma_inv_range
- .long arm925_dma_clean_range
+ .long arm925_dma_map_area
+ .long arm925_dma_unmap_area
.long arm925_dma_flush_range
ENTRY(cpu_arm925_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 64db6e2..75b707c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -246,7 +246,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_inv_range)
+arm926_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -271,7 +271,7 @@
*
* (same as v4wb)
*/
-ENTRY(arm926_dma_clean_range)
+arm926_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm926_dma_clean_range
+ bcs arm926_dma_inv_range
+ b arm926_dma_flush_range
+ENDPROC(arm926_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm926_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm926_dma_unmap_area)
+
ENTRY(arm926_cache_fns)
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
@@ -311,8 +335,8 @@
.long arm926_coherent_kern_range
.long arm926_coherent_user_range
.long arm926_flush_kern_dcache_area
- .long arm926_dma_inv_range
- .long arm926_dma_clean_range
+ .long arm926_dma_map_area
+ .long arm926_dma_unmap_area
.long arm926_dma_flush_range
ENTRY(cpu_arm926_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 8196b9f..1af1657 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -171,7 +171,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_inv_range)
+arm940_dma_inv_range:
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -192,7 +192,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(arm940_dma_clean_range)
+arm940_dma_clean_range:
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -233,6 +233,30 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm940_dma_clean_range
+ bcs arm940_dma_inv_range
+ b arm940_dma_flush_range
+ENDPROC(arm940_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm940_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm940_dma_unmap_area)
+
ENTRY(arm940_cache_fns)
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
@@ -240,8 +264,8 @@
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_area
- .long arm940_dma_inv_range
- .long arm940_dma_clean_range
+ .long arm940_dma_map_area
+ .long arm940_dma_unmap_area
.long arm940_dma_flush_range
__INIT
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 9a95123..1664b6a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -215,7 +215,7 @@
* - end - virtual end address
* (same as arm926)
*/
-ENTRY(arm946_dma_inv_range)
+arm946_dma_inv_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -240,7 +240,7 @@
*
* (same as arm926)
*/
-ENTRY(arm946_dma_clean_range)
+arm946_dma_clean_range:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -275,6 +275,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq arm946_dma_clean_range
+ bcs arm946_dma_inv_range
+ b arm946_dma_flush_range
+ENDPROC(arm946_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(arm946_dma_unmap_area)
+ mov pc, lr
+ENDPROC(arm946_dma_unmap_area)
+
ENTRY(arm946_cache_fns)
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
@@ -282,8 +306,8 @@
.long arm946_coherent_kern_range
.long arm946_coherent_user_range
.long arm946_flush_kern_dcache_area
- .long arm946_dma_inv_range
- .long arm946_dma_clean_range
+ .long arm946_dma_map_area
+ .long arm946_dma_unmap_area
.long arm946_dma_flush_range
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index dbc3938..53e6323 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -274,7 +274,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_inv_range)
+feroceon_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -288,7 +288,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_inv_range)
+feroceon_range_dma_inv_range:
mrs r2, cpsr
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -314,7 +314,7 @@
* (same as v4wb)
*/
.align 5
-ENTRY(feroceon_dma_clean_range)
+feroceon_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -324,7 +324,7 @@
mov pc, lr
.align 5
-ENTRY(feroceon_range_dma_clean_range)
+feroceon_range_dma_clean_range:
mrs r2, cpsr
cmp r1, r0
subne r1, r1, #1 @ top address is inclusive
@@ -367,6 +367,44 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_dma_clean_range
+ bcs feroceon_dma_inv_range
+ b feroceon_dma_flush_range
+ENDPROC(feroceon_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_range_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq feroceon_range_dma_clean_range
+ bcs feroceon_range_dma_inv_range
+ b feroceon_range_dma_flush_range
+ENDPROC(feroceon_range_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(feroceon_dma_unmap_area)
+ mov pc, lr
+ENDPROC(feroceon_dma_unmap_area)
+
ENTRY(feroceon_cache_fns)
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
@@ -374,8 +412,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_flush_kern_dcache_area
- .long feroceon_dma_inv_range
- .long feroceon_dma_clean_range
+ .long feroceon_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
@@ -385,8 +423,8 @@
.long feroceon_coherent_kern_range
.long feroceon_coherent_user_range
.long feroceon_range_flush_kern_dcache_area
- .long feroceon_range_dma_inv_range
- .long feroceon_range_dma_clean_range
+ .long feroceon_range_dma_map_area
+ .long feroceon_dma_unmap_area
.long feroceon_range_dma_flush_range
.align 5
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 9674d36..caa3115 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -218,7 +218,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_inv_range)
+mohawk_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
@@ -241,7 +241,7 @@
*
* (same as v4wb)
*/
-ENTRY(mohawk_dma_clean_range)
+mohawk_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
@@ -268,6 +268,30 @@
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq mohawk_dma_clean_range
+ bcs mohawk_dma_inv_range
+ b mohawk_dma_flush_range
+ENDPROC(mohawk_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(mohawk_dma_unmap_area)
+ mov pc, lr
+ENDPROC(mohawk_dma_unmap_area)
+
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
@@ -275,8 +299,8 @@
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_area
- .long mohawk_dma_inv_range
- .long mohawk_dma_clean_range
+ .long mohawk_dma_map_area
+ .long mohawk_dma_unmap_area
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8e4f6dc..e5797f1 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -257,7 +257,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_inv_range)
+xsc3_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
@@ -278,7 +278,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xsc3_dma_clean_range)
+xsc3_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
@@ -304,6 +304,30 @@
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xsc3_dma_clean_range
+ bcs xsc3_dma_inv_range
+ b xsc3_dma_flush_range
+ENDPROC(xsc3_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xsc3_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xsc3_dma_unmap_area)
+
ENTRY(xsc3_cache_fns)
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
@@ -311,8 +335,8 @@
.long xsc3_coherent_kern_range
.long xsc3_coherent_user_range
.long xsc3_flush_kern_dcache_area
- .long xsc3_dma_inv_range
- .long xsc3_dma_clean_range
+ .long xsc3_dma_map_area
+ .long xsc3_dma_unmap_area
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 93df472..63037e2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -315,7 +315,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_inv_range)
+xscale_dma_inv_range:
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -336,7 +336,7 @@
* - start - virtual start address
* - end - virtual end address
*/
-ENTRY(xscale_dma_clean_range)
+xscale_dma_clean_range:
bic r0, r0, #CACHELINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
@@ -363,6 +363,43 @@
mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+ add r1, r1, r0
+ cmp r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ bcs xscale_dma_inv_range
+ b xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_a0_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ beq xscale_dma_clean_range
+ b xscale_dma_flush_range
+ENDPROC(xscsale_dma_a0_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+ mov pc, lr
+ENDPROC(xscale_dma_unmap_area)
+
ENTRY(xscale_cache_fns)
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
@@ -370,8 +407,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_inv_range
- .long xscale_dma_clean_range
+ .long xscale_dma_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
/*
@@ -394,8 +431,8 @@
.long xscale_coherent_kern_range
.long xscale_coherent_user_range
.long xscale_flush_kern_dcache_area
- .long xscale_dma_flush_range
- .long xscale_dma_clean_range
+ .long xscale_dma_a0_map_area
+ .long xscale_dma_unmap_area
.long xscale_dma_flush_range
ENTRY(cpu_xscale_dcache_clean_area)
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
index ad80752..ef3e265 100644
--- a/arch/arm/oprofile/op_model_arm11_core.c
+++ b/arch/arm/oprofile/op_model_arm11_core.c
@@ -132,7 +132,7 @@
return IRQ_HANDLED;
}
-int arm11_request_interrupts(int *irqs, int nr)
+int arm11_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
@@ -153,7 +153,7 @@
return ret;
}
-void arm11_release_interrupts(int *irqs, int nr)
+void arm11_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
index 6f8538e..1902b99 100644
--- a/arch/arm/oprofile/op_model_arm11_core.h
+++ b/arch/arm/oprofile/op_model_arm11_core.h
@@ -39,7 +39,7 @@
int arm11_setup_pmu(void);
int arm11_start_pmu(void);
int arm11_stop_pmu(void);
-int arm11_request_interrupts(int *, int);
-void arm11_release_interrupts(int *, int);
+int arm11_request_interrupts(const int *, int);
+void arm11_release_interrupts(const int *, int);
#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 4ce0f98..f73ce87 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -32,6 +32,7 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
@@ -43,6 +44,7 @@
#include <mach/hardware.h>
#include <mach/board-eb.h>
#include <asm/system.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
@@ -58,6 +60,7 @@
* Bitmask of used SCU counters
*/
static unsigned int scu_em_used;
+static const struct pmu_irqs *pmu_irqs;
/*
* 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
@@ -225,33 +228,40 @@
return 0;
}
-static int arm11_irqs[] = {
- [0] = IRQ_EB11MP_PMU_CPU0,
- [1] = IRQ_EB11MP_PMU_CPU1,
- [2] = IRQ_EB11MP_PMU_CPU2,
- [3] = IRQ_EB11MP_PMU_CPU3
-};
-
static int em_start(void)
{
int ret;
- ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ ret = PTR_ERR(pmu_irqs);
+ goto out;
+ }
+
+ ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
if (ret == 0) {
em_call_function(arm11_start_pmu);
ret = scu_start();
- if (ret)
- arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ if (ret) {
+ arm11_release_interrupts(pmu_irqs->irqs,
+ pmu_irqs->num_irqs);
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
}
+
+out:
return ret;
}
static void em_stop(void)
{
em_call_function(arm11_stop_pmu);
- arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
scu_stop();
+ release_pmu(pmu_irqs);
}
/*
@@ -283,15 +293,7 @@
em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
- /*
- * Send CP15 PMU interrupts to the owner CPU.
- */
- em_route_irq(IRQ_EB11MP_PMU_CPU0, 0);
- em_route_irq(IRQ_EB11MP_PMU_CPU1, 1);
- em_route_irq(IRQ_EB11MP_PMU_CPU2, 2);
- em_route_irq(IRQ_EB11MP_PMU_CPU3, 3);
-
- return 0;
+ return init_pmu();
}
struct op_arm_model_spec op_mpcore_spec = {
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index f7d2ec5..a22357a 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -19,39 +19,47 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/system.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_arm11_core.h"
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP2
- 3,
-#endif
-#ifdef CONFIG_ARCH_BCMRING
- IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
static void armv6_pmu_stop(void)
{
arm11_stop_pmu();
- arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+ arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int armv6_pmu_start(void)
{
int ret;
- ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
- if (ret >= 0)
- ret = arm11_start_pmu();
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs)) {
+ ret = PTR_ERR(pmu_irqs);
+ goto out;
+ }
+ ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ if (ret >= 0) {
+ ret = arm11_start_pmu();
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
+
+out:
return ret;
}
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
index 2088a6c..8642d08 100644
--- a/arch/arm/oprofile/op_model_v7.c
+++ b/arch/arm/oprofile/op_model_v7.c
@@ -11,11 +11,14 @@
*/
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/smp.h>
+#include <asm/pmu.h>
+
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_v7.h"
@@ -295,7 +298,7 @@
return IRQ_HANDLED;
}
-int armv7_request_interrupts(int *irqs, int nr)
+int armv7_request_interrupts(const int *irqs, int nr)
{
unsigned int i;
int ret = 0;
@@ -318,7 +321,7 @@
return ret;
}
-void armv7_release_interrupts(int *irqs, int nr)
+void armv7_release_interrupts(const int *irqs, int nr)
{
unsigned int i;
@@ -362,12 +365,7 @@
}
#endif
-
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP3
- INT_34XX_BENCH_MPU_EMUL,
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
static void armv7_pmnc_stop(void)
{
@@ -375,19 +373,29 @@
armv7_pmnc_dump_regs();
#endif
armv7_stop_pmnc();
- armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
+ armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int armv7_pmnc_start(void)
{
int ret;
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs))
+ return PTR_ERR(pmu_irqs);
+
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
- ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
- if (ret >= 0)
+ ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+ if (ret >= 0) {
armv7_start_pmnc();
+ } else {
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
+ }
return ret;
}
diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
index 0e19bcc..9ca334b 100644
--- a/arch/arm/oprofile/op_model_v7.h
+++ b/arch/arm/oprofile/op_model_v7.h
@@ -97,7 +97,7 @@
int armv7_setup_pmu(void);
int armv7_start_pmu(void);
int armv7_stop_pmu(void);
-int armv7_request_interrupts(int *, int);
-void armv7_release_interrupts(int *, int);
+int armv7_request_interrupts(const int *, int);
+void armv7_release_interrupts(const int *, int);
#endif
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 724ab9c..1d34a02 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -17,12 +17,14 @@
/* #define DEBUG */
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/sched.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/cputype.h>
+#include <asm/pmu.h>
#include "op_counter.h"
#include "op_arm_model.h"
@@ -33,17 +35,6 @@
#define PMU_RESET (CCNT_RESET | PMN_RESET)
#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */
-/* TODO do runtime detection */
-#ifdef CONFIG_ARCH_IOP32X
-#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_PXA
-#define XSCALE_PMU_IRQ IRQ_PMU
-#endif
-
/*
* Different types of events that can be counted by the XScale PMU
* as used by Oprofile userspace. Here primarily for documentation
@@ -367,6 +358,8 @@
return IRQ_HANDLED;
}
+static const struct pmu_irqs *pmu_irqs;
+
static void xscale_pmu_stop(void)
{
u32 pmnc = read_pmnc();
@@ -374,20 +367,30 @@
pmnc &= ~PMU_ENABLE;
write_pmnc(pmnc);
- free_irq(XSCALE_PMU_IRQ, results);
+ free_irq(pmu_irqs->irqs[0], results);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
}
static int xscale_pmu_start(void)
{
int ret;
- u32 pmnc = read_pmnc();
+ u32 pmnc;
- ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, IRQF_DISABLED,
- "XScale PMU", (void *)results);
+ pmu_irqs = reserve_pmu();
+ if (IS_ERR(pmu_irqs))
+ return PTR_ERR(pmu_irqs);
+
+ pmnc = read_pmnc();
+
+ ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
+ IRQF_DISABLED, "XScale PMU", (void *)results);
if (ret < 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
- XSCALE_PMU_IRQ);
+ pmu_irqs->irqs[0]);
+ release_pmu(pmu_irqs);
+ pmu_irqs = NULL;
return ret;
}
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index ed0bbec..e15bc17 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -34,7 +34,8 @@
retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
break;
default:
- retval = __arm_ioremap(cookie, size, mtype);
+ retval = __arm_ioremap_caller(cookie, size, mtype,
+ __builtin_return_address(0));
}
return retval;
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 996cbac..6cee38d 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -13,3 +13,7 @@
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b14..5a6ae1b 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -52,7 +52,7 @@
#define UART_PADDR MXC91231_UART2_BASE_ADDR
#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =UART_PADDR @ physical
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 62d9762..44243a2 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -21,6 +21,6 @@
#define __ASM_ARCH_MXC_VMALLOC_H__
/* vmalloc ending address */
-#define VMALLOC_END 0xF4000000
+#define VMALLOC_END 0xf4000000UL
#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c
new file mode 100644
index 0000000..b5fad45
--- /dev/null
+++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c
@@ -0,0 +1,20 @@
+/*
+ * Exported ksyms for the SSI FIQ handler
+ *
+ * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+
+#include <mach/ssi.h>
+
+EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_start);
+EXPORT_SYMBOL(imx_ssi_fiq_end);
+EXPORT_SYMBOL(imx_ssi_fiq_base);
+
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
new file mode 100644
index 0000000..4ddce56
--- /dev/null
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size
+ * r9 = bit 0-15: rx offset, bit 16-31: rx buffer size
+ */
+
+#define SSI_STX0 0x00
+#define SSI_SRX0 0x08
+#define SSI_SISR 0x14
+#define SSI_SIER 0x18
+#define SSI_SACNT 0x38
+
+#define SSI_SACNT_AC97EN (1 << 0)
+
+#define SSI_SIER_TFE0_EN (1 << 0)
+#define SSI_SISR_TFE0 (1 << 0)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SIER_RFF0_EN (1 << 2)
+
+ .text
+ .global imx_ssi_fiq_start
+ .global imx_ssi_fiq_end
+ .global imx_ssi_fiq_base
+ .global imx_ssi_fiq_rx_buffer
+ .global imx_ssi_fiq_tx_buffer
+
+imx_ssi_fiq_start:
+ ldr r12, imx_ssi_fiq_base
+
+ /* TX */
+ ldr r11, imx_ssi_fiq_tx_buffer
+
+ /* shall we send? */
+ ldr r13, [r12, #SSI_SIER]
+ tst r13, #SSI_SIER_TFE0_EN
+ beq 1f
+
+ /* TX FIFO empty? */
+ ldr r13, [r12, #SSI_SISR]
+ tst r13, #SSI_SISR_TFE0
+ beq 1f
+
+ mov r10, #0x10000
+ sub r10, #1
+ and r10, r10, r8 /* r10: current buffer offset */
+
+ add r11, r11, r10
+
+ ldrh r13, [r11]
+ strh r13, [r12, #SSI_STX0]
+
+ ldrh r13, [r11, #2]
+ strh r13, [r12, #SSI_STX0]
+
+ ldrh r13, [r11, #4]
+ strh r13, [r12, #SSI_STX0]
+
+ ldrh r13, [r11, #6]
+ strh r13, [r12, #SSI_STX0]
+
+ add r10, #8
+ lsr r13, r8, #16 /* r13: buffer size */
+ cmp r10, r13
+ lslgt r8, r13, #16
+ addle r8, #8
+1:
+ /* RX */
+
+ /* shall we receive? */
+ ldr r13, [r12, #SSI_SIER]
+ tst r13, #SSI_SIER_RFF0_EN
+ beq 1f
+
+ /* RX FIFO full? */
+ ldr r13, [r12, #SSI_SISR]
+ tst r13, #SSI_SISR_RFF0
+ beq 1f
+
+ ldr r11, imx_ssi_fiq_rx_buffer
+
+ mov r10, #0x10000
+ sub r10, #1
+ and r10, r10, r9 /* r10: current buffer offset */
+
+ add r11, r11, r10
+
+ ldr r13, [r12, #SSI_SACNT]
+ tst r13, #SSI_SACNT_AC97EN
+
+ ldr r13, [r12, #SSI_SRX0]
+ strh r13, [r11]
+
+ ldr r13, [r12, #SSI_SRX0]
+ strh r13, [r11, #2]
+
+ /* dummy read to skip slot 12 */
+ ldrne r13, [r12, #SSI_SRX0]
+
+ ldr r13, [r12, #SSI_SRX0]
+ strh r13, [r11, #4]
+
+ ldr r13, [r12, #SSI_SRX0]
+ strh r13, [r11, #6]
+
+ /* dummy read to skip slot 12 */
+ ldrne r13, [r12, #SSI_SRX0]
+
+ add r10, #8
+ lsr r13, r9, #16 /* r13: buffer size */
+ cmp r10, r13
+ lslgt r9, r13, #16
+ addle r9, #8
+
+1:
+ @ return from FIQ
+ subs pc, lr, #4
+imx_ssi_fiq_base:
+ .word 0x0
+imx_ssi_fiq_rx_buffer:
+ .word 0x0
+imx_ssi_fiq_tx_buffer:
+ .word 0x0
+imx_ssi_fiq_end:
+
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
new file mode 100644
index 0000000..1621db6
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PLAT_I2C_H
+#define __PLAT_I2C_H
+
+enum i2c_freq_mode {
+ I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */
+ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */
+ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
+ I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq: clock frequency for the operation mode
+ * @slsu: Slave data setup time in ns.
+ * The needed setup time for three modes of operation
+ * are 250ns, 100ns and 10ns respectively thus leading
+ * to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @sm: speed mode
+ */
+struct nmk_i2c_controller {
+ unsigned long clk_freq;
+ unsigned short slsu;
+ unsigned char tft;
+ unsigned char rft;
+ enum i2c_freq_mode sm;
+};
+
+#endif /* __PLAT_I2C_H */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index e2ea04a..6da796e 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -7,27 +7,37 @@
choice
prompt "OMAP System Type"
- default ARCH_OMAP1
+ default ARCH_OMAP2PLUS
config ARCH_OMAP1
bool "TI OMAP1"
select COMMON_CLKDEV
+ help
+ "Systems based on omap7xx, omap15xx or omap16xx"
+
+config ARCH_OMAP2PLUS
+ bool "TI OMAP2/3/4"
+ select COMMON_CLKDEV
+ help
+ "Systems based on omap24xx, omap34xx or omap44xx"
config ARCH_OMAP2
bool "TI OMAP2"
+ depends on ARCH_OMAP2PLUS
select CPU_V6
- select COMMON_CLKDEV
config ARCH_OMAP3
bool "TI OMAP3"
+ depends on ARCH_OMAP2PLUS
select CPU_V7
- select COMMON_CLKDEV
+ select USB_ARCH_HAS_EHCI
+ select ARM_L1_CACHE_SHIFT_6
config ARCH_OMAP4
bool "TI OMAP4"
+ depends on ARCH_OMAP2PLUS
select CPU_V7
select ARM_GIC
- select COMMON_CLKDEV
endchoice
@@ -116,7 +126,7 @@
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -126,6 +136,23 @@
endchoice
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+ depends on ARCH_OMAP3 && PM
+ default n
+ help
+ Without this option, L2 Auxiliary control register contents are
+ lost during off-mode entry on HS/EMU devices. This feature
+ requires support from PPA / boot-loader in HS/EMU devices, which
+ currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ int "Service ID for the support routine to set L2 AUX control"
+ depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ default 43
+ help
+ PPA routine service ID for setting L2 auxiliary control register.
+
config OMAP_32K_TIMER_HZ
int "Kernel internal timer frequency for 32KHz timer"
range 32 1024
@@ -137,29 +164,10 @@
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
help
Select this option if you want to use OMAP Dual-Mode timers.
-choice
- prompt "Low-level debug console UART"
- depends on ARCH_OMAP
- default OMAP_LL_DEBUG_NONE
-
-config OMAP_LL_DEBUG_UART1
- bool "UART1"
-
-config OMAP_LL_DEBUG_UART2
- bool "UART2"
-
-config OMAP_LL_DEBUG_UART3
- bool "UART3"
-
-config OMAP_LL_DEBUG_NONE
- bool "None"
-
-endchoice
-
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 4becbdd..5261a09 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -173,7 +173,7 @@
* OMAP specific clock functions shared between omap1 and omap2
*-------------------------------------------------------------------------*/
-unsigned int __initdata mpurate;
+int __initdata mpurate;
/*
* By default we use the rate set by the bootloader.
@@ -199,6 +199,17 @@
return clk->parent->rate;
}
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
void clk_reparent(struct clk *child, struct clk *parent)
{
list_del_init(&child->sibling);
@@ -302,6 +313,33 @@
}
}
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
/*
* Low level helpers
*/
@@ -319,6 +357,16 @@
.disable = clkll_disable_null,
};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
#ifdef CONFIG_CPU_FREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
@@ -397,8 +445,6 @@
char *p = s;
p += sprintf(p, "%s", c->name);
- if (c->id != 0)
- sprintf(p, ":%d", c->id);
d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
if (!d)
return -ENOMEM;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index dddc027..088c1a0 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -34,6 +34,7 @@
#include <plat/control.h>
#include <plat/mux.h>
#include <plat/fpga.h>
+#include <plat/serial.h>
#include <plat/clock.h>
@@ -126,7 +127,7 @@
#define omap2430_32k_read NULL
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
@@ -245,6 +246,7 @@
omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
+ omap2_set_globals_uart(omap2_globals);
}
#endif
@@ -254,11 +256,14 @@
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+ .sdrc = OMAP2420_SDRC_BASE,
+ .sms = OMAP2420_SMS_BASE,
+ .ctrl = OMAP2420_CTRL_BASE,
+ .prm = OMAP2420_PRM_BASE,
+ .cm = OMAP2420_CM_BASE,
+ .uart1_phys = OMAP2_UART1_BASE,
+ .uart2_phys = OMAP2_UART2_BASE,
+ .uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_242x(void)
@@ -272,11 +277,14 @@
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+ .sdrc = OMAP243X_SDRC_BASE,
+ .sms = OMAP243X_SMS_BASE,
+ .ctrl = OMAP243X_CTRL_BASE,
+ .prm = OMAP2430_PRM_BASE,
+ .cm = OMAP2430_CM_BASE,
+ .uart1_phys = OMAP2_UART1_BASE,
+ .uart2_phys = OMAP2_UART2_BASE,
+ .uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_243x(void)
@@ -285,21 +293,31 @@
}
#endif
-#if defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP3)
-static struct omap_globals omap343x_globals = {
+static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ .sdrc = OMAP343X_SDRC_BASE,
+ .sms = OMAP343X_SMS_BASE,
+ .ctrl = OMAP343X_CTRL_BASE,
+ .prm = OMAP3430_PRM_BASE,
+ .cm = OMAP3430_CM_BASE,
+ .uart1_phys = OMAP3_UART1_BASE,
+ .uart2_phys = OMAP3_UART2_BASE,
+ .uart3_phys = OMAP3_UART3_BASE,
};
void __init omap2_set_globals_343x(void)
{
- __omap2_set_globals(&omap343x_globals);
+ __omap2_set_globals(&omap3_globals);
+}
+
+void __init omap2_set_globals_36xx(void)
+{
+ omap3_globals.uart4_phys = OMAP3_UART4_BASE;
+
+ __omap2_set_globals(&omap3_globals);
}
#endif
@@ -307,10 +325,14 @@
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+ .ctrl = OMAP443X_CTRL_BASE,
+ .prm = OMAP4430_PRM_BASE,
+ .cm = OMAP4430_CM_BASE,
+ .cm2 = OMAP4430_CM2_BASE,
+ .uart1_phys = OMAP4_UART1_BASE,
+ .uart2_phys = OMAP4_UART2_BASE,
+ .uart3_phys = OMAP4_UART3_BASE,
+ .uart4_phys = OMAP4_UART4_BASE,
};
void __init omap2_set_globals_443x(void)
@@ -318,6 +340,7 @@
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
+ omap2_set_globals_uart(&omap4_globals);
}
#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 30b5db7..4a4cd87 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -28,6 +28,7 @@
#include <plat/menelaus.h>
#include <plat/mcbsp.h>
#include <plat/dsp_common.h>
+#include <plat/omap44xx.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
@@ -192,6 +193,41 @@
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct resource mcpdm_resources[] = {
+ {
+ .name = "mcpdm_mem",
+ .start = OMAP44XX_MCPDM_BASE,
+ .end = OMAP44XX_MCPDM_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mcpdm_irq",
+ .start = OMAP44XX_IRQ_MCPDM,
+ .end = OMAP44XX_IRQ_MCPDM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap_mcpdm_device = {
+ .name = "omap-mcpdm",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mcpdm_resources),
+ .resource = mcpdm_resources,
+};
+
+static void omap_init_mcpdm(void)
+{
+ (void) platform_device_register(&omap_mcpdm_device);
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
@@ -244,7 +280,7 @@
#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
#define OMAP_RNG_BASE 0x480A0000
#else
#define OMAP_RNG_BASE 0xfffe5000
@@ -385,6 +421,7 @@
omap_init_dsp();
omap_init_kp();
omap_init_rng();
+ omap_init_mcpdm();
omap_init_uwire();
omap_init_wdt();
return 0;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 728c642..2ab224c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1870,8 +1870,7 @@
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
static int omap2_dma_handle_ch(int ch)
{
@@ -2133,13 +2132,13 @@
if (cpu_class_is_omap2()) {
int irq;
if (cpu_is_omap44xx())
- irq = INT_44XX_SDMA_IRQ0;
+ irq = OMAP44XX_IRQ_SDMA_0;
else
irq = INT_24XX_SDMA_IRQ0;
setup_irq(irq, &omap24xx_dma_irq);
}
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
/* Enable smartidle idlemodes and autoidle */
u32 v = dma_read(OCP_SYSCONFIG);
v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
@@ -2150,7 +2149,8 @@
DMA_SYSCONFIG_AUTOIDLE);
dma_write(v , OCP_SYSCONFIG);
/* reserve dma channels 0 and 1 in high security devices */
- if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+ if (cpu_is_omap34xx() &&
+ (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
"HS ROM code\n");
dma_chan[0].dev_id = 0;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 08ccf89..4d99dfbc 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -153,8 +153,7 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
@@ -163,20 +162,9 @@
unsigned posted:1;
};
+static int dm_timer_count;
+
#ifdef CONFIG_ARCH_OMAP1
-
-#define omap_dm_clk_enable(x)
-#define omap_dm_clk_disable(x)
-#define omap2_dm_timers NULL
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
-#define omap3_dm_timers NULL
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#define omap4_dm_timers NULL
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
-
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
@@ -188,20 +176,14 @@
{ .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
};
-static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
+static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
-#elif defined(CONFIG_ARCH_OMAP2)
-
-#define omap_dm_clk_enable(x) clk_enable(x)
-#define omap_dm_clk_disable(x) clk_disable(x)
+#else
#define omap1_dm_timers NULL
-#define omap3_dm_timers NULL
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#define omap4_dm_timers NULL
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
+#define omap1_dm_timer_count 0
+#endif /* CONFIG_ARCH_OMAP1 */
+#ifdef CONFIG_ARCH_OMAP2
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
{ .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
@@ -225,20 +207,16 @@
};
static struct clk *omap2_dm_source_clocks[3];
-static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
+static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-#elif defined(CONFIG_ARCH_OMAP3)
-
-#define omap_dm_clk_enable(x) clk_enable(x)
-#define omap_dm_clk_disable(x) clk_disable(x)
-#define omap1_dm_timers NULL
+#else
#define omap2_dm_timers NULL
+#define omap2_dm_timer_count 0
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
-#define omap4_dm_timers NULL
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
+#endif /* CONFIG_ARCH_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP3
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
{ .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
@@ -261,33 +239,29 @@
};
static struct clk *omap3_dm_source_clocks[2];
-static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
-#elif defined(CONFIG_ARCH_OMAP4)
-
-#define omap_dm_clk_enable(x) clk_enable(x)
-#define omap_dm_clk_disable(x) clk_disable(x)
-#define omap1_dm_timers NULL
-#define omap2_dm_timers NULL
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
+#else
#define omap3_dm_timers NULL
+#define omap3_dm_timer_count 0
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#endif /* CONFIG_ARCH_OMAP3 */
+#ifdef CONFIG_ARCH_OMAP4
static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
- { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
- { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
- { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
- { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
- { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
- { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
- { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
- { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
- { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+ { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
+ { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
+ { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
+ { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
+ { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
+ { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
+ { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
+ { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
+ { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
+ { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
+ { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
+ { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
};
static const char *omap4_dm_source_names[] __initdata = {
"sys_ck",
@@ -295,13 +269,14 @@
NULL
};
static struct clk *omap4_dm_source_clocks[2];
-static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
#else
-
-#error OMAP architecture not supported!
-
-#endif
+#define omap4_dm_timers NULL
+#define omap4_dm_timer_count 0
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
+#endif /* CONFIG_ARCH_OMAP4 */
static struct omap_dm_timer *dm_timers;
static const char **dm_source_names;
@@ -450,8 +425,12 @@
if (timer->enabled)
return;
- omap_dm_clk_enable(timer->fclk);
- omap_dm_clk_enable(timer->iclk);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ if (cpu_class_is_omap2()) {
+ clk_enable(timer->fclk);
+ clk_enable(timer->iclk);
+ }
+#endif
timer->enabled = 1;
}
@@ -462,8 +441,12 @@
if (!timer->enabled)
return;
- omap_dm_clk_disable(timer->iclk);
- omap_dm_clk_disable(timer->fclk);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ if (cpu_class_is_omap2()) {
+ clk_disable(timer->iclk);
+ clk_disable(timer->fclk);
+ }
+#endif
timer->enabled = 0;
}
@@ -506,8 +489,7 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#else
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
@@ -551,8 +533,7 @@
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
/*
@@ -764,17 +745,21 @@
if (cpu_class_is_omap1()) {
dm_timers = omap1_dm_timers;
+ dm_timer_count = omap1_dm_timer_count;
map_size = SZ_2K;
} else if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
+ dm_timer_count = omap2_dm_timer_count;
dm_source_names = omap2_dm_source_names;
dm_source_clocks = omap2_dm_source_clocks;
} else if (cpu_is_omap34xx()) {
dm_timers = omap3_dm_timers;
+ dm_timer_count = omap3_dm_timer_count;
dm_source_names = omap3_dm_source_names;
dm_source_clocks = omap3_dm_source_clocks;
} else if (cpu_is_omap44xx()) {
dm_timers = omap4_dm_timers;
+ dm_timer_count = omap4_dm_timer_count;
dm_source_names = omap4_dm_source_names;
dm_source_clocks = omap4_dm_source_clocks;
}
@@ -793,8 +778,7 @@
timer->io_base = ioremap(timer->phys_base, map_size);
BUG_ON(!timer->io_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2422c7..337199e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -177,13 +177,11 @@
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -204,6 +202,7 @@
#define METHOD_GPIO_1610 2
#define METHOD_GPIO_7XX 3
#define METHOD_GPIO_24XX 5
+#define METHOD_GPIO_44XX 6
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
@@ -248,7 +247,7 @@
};
#endif
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
static struct gpio_bank gpio_bank_242x[4] = {
{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
@@ -276,7 +275,7 @@
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static struct gpio_bank gpio_bank_34xx[6] = {
{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
@@ -313,18 +312,18 @@
#ifdef CONFIG_ARCH_OMAP4
static struct gpio_bank gpio_bank_44xx[6] = {
- { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_24XX },
- { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
- METHOD_GPIO_24XX },
- { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
- METHOD_GPIO_24XX },
- { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
- METHOD_GPIO_24XX },
- { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
- METHOD_GPIO_24XX },
- { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
- METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
+ METHOD_GPIO_44XX },
+ { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
+ METHOD_GPIO_44XX },
};
#endif
@@ -426,13 +425,13 @@
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_OE;
break;
#endif
@@ -493,7 +492,7 @@
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -503,7 +502,7 @@
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (enable)
reg += OMAP4_GPIO_SETDATAOUT;
else
@@ -546,13 +545,13 @@
reg += OMAP7XX_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_DATAIN;
break;
#endif
@@ -592,9 +591,9 @@
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_DATAOUT;
break;
#endif
@@ -625,11 +624,12 @@
bank = get_gpio_bank(gpio);
reg = bank->base;
-#ifdef CONFIG_ARCH_OMAP4
- reg += OMAP4_GPIO_DEBOUNCENABLE;
-#else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-#endif
+
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
if (!(bank->mod_usage & l)) {
printk(KERN_ERR "GPIO %d not requested\n", gpio);
return;
@@ -675,17 +675,17 @@
}
enc_time &= 0xff;
-#ifdef CONFIG_ARCH_OMAP4
- reg += OMAP4_GPIO_DEBOUNCINGTIME;
-#else
- reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-#endif
+
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCINGTIME;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
__raw_writel(enc_time, reg);
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
@@ -856,9 +856,9 @@
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
#endif
@@ -937,13 +937,13 @@
reg += OMAP7XX_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_IRQSTATUS0;
break;
#endif
@@ -954,12 +954,11 @@
__raw_writel(gpio_mask, reg);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-#endif
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+ else if (cpu_is_omap44xx())
+ reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
__raw_writel(gpio_mask, reg);
@@ -1008,14 +1007,14 @@
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP4_GPIO_IRQSTATUSSET0;
mask = 0xffffffff;
break;
@@ -1077,7 +1076,7 @@
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -1087,7 +1086,7 @@
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (enable)
reg += OMAP4_GPIO_IRQSTATUSSET0;
else
@@ -1131,9 +1130,9 @@
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
"non-wakeup GPIO%d\n",
@@ -1227,9 +1226,9 @@
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_24XX) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ if ((bank->method == METHOD_GPIO_24XX) ||
+ (bank->method == METHOD_GPIO_44XX)) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
__raw_writel(1 << offset, reg);
@@ -1286,12 +1285,12 @@
if (bank->method == METHOD_GPIO_7XX)
isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
#if defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_24XX)
+ if (bank->method == METHOD_GPIO_44XX)
isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
#endif
while(1) {
@@ -1571,6 +1570,7 @@
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_OE;
break;
}
@@ -1630,7 +1630,7 @@
/*---------------------------------------------------------------------*/
static int initialized;
-#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
static struct clk * gpio_ick;
#endif
@@ -1756,7 +1756,7 @@
bank_size = SZ_2K;
}
#endif
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
if (cpu_is_omap242x()) {
gpio_bank_count = 4;
gpio_bank = gpio_bank_242x;
@@ -1766,7 +1766,7 @@
gpio_bank = gpio_bank_243x;
}
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
if (cpu_is_omap34xx()) {
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_34xx;
@@ -1809,30 +1809,42 @@
gpio_count = 32; /* 7xx has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_24XX) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ if ((bank->method == METHOD_GPIO_24XX) ||
+ (bank->method == METHOD_GPIO_44XX)) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
};
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
- OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writew(0x0015, bank->base +
- OMAP4_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base +
- OMAP4_GPIO_DEBOUNCENABLE);
- /* Initialize interface clock ungated, module enabled */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else {
- __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
- __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
- /* Initialize interface clock ungated, module enabled */
- __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
- }
+ if (cpu_is_omap44xx()) {
+ __raw_writel(0xffffffff, bank->base +
+ OMAP4_GPIO_IRQSTATUSCLR0);
+ __raw_writew(0x0015, bank->base +
+ OMAP4_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base +
+ OMAP4_GPIO_DEBOUNCENABLE);
+ /*
+ * Initialize interface clock ungated,
+ * module enabled
+ */
+ __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+ } else {
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_IRQENABLE1);
+ __raw_writel(0xffffffff, bank->base +
+ OMAP24XX_GPIO_IRQSTATUS1);
+ __raw_writew(0x0015, bank->base +
+ OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base +
+ OMAP24XX_GPIO_DEBOUNCE_EN);
+
+ /*
+ * Initialize interface clock ungated,
+ * module enabled
+ */
+ __raw_writel(0, bank->base +
+ OMAP24XX_GPIO_CTRL);
+ }
if (i < ARRAY_SIZE(non_wakeup_gpios))
bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
@@ -1903,8 +1915,7 @@
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
@@ -1927,7 +1938,7 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1935,7 +1946,7 @@
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
@@ -1975,14 +1986,14 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_24XX:
+ case METHOD_GPIO_44XX:
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
break;
@@ -2013,8 +2024,7 @@
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
static int workaround_enabled;
@@ -2030,29 +2040,42 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP24XX_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_RISINGDETECT);
+ }
+
+ if (cpu_is_omap44xx()) {
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP4_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base +
+ OMAP4_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base +
+ OMAP4_GPIO_RISINGDETECT);
+ }
+
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ __raw_writel(l1, bank->base +
+ OMAP24XX_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base +
+ OMAP24XX_GPIO_RISINGDETECT);
+ }
+
+ if (cpu_is_omap44xx()) {
+ __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+ }
+
c++;
}
if (!c) {
@@ -2074,20 +2097,23 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- __raw_writel(bank->saved_fallingdetect,
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ __raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
+ __raw_writel(bank->saved_risingdetect,
bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- __raw_writel(bank->saved_fallingdetect,
+ l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+ }
+
+ if (cpu_is_omap44xx()) {
+ __raw_writel(bank->saved_fallingdetect,
bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
+ __raw_writel(bank->saved_risingdetect,
bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-#endif
+ l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+ }
+
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
@@ -2113,30 +2139,36 @@
if (gen) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+
+ if (cpu_is_omap24xx() || cpu_is_omap44xx()) {
+ old0 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_LEVELDETECT0);
+ old1 = __raw_readl(bank->base +
+ OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- old0 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
__raw_writel(old0, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
+ OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1, bank->base +
+ OMAP24XX_GPIO_LEVELDETECT1);
+ }
+
+ if (cpu_is_omap44xx()) {
+ old0 = __raw_readl(bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ old1 = __raw_readl(bank->base +
OMAP4_GPIO_LEVELDETECT1);
-#endif
+ __raw_writel(old0 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ __raw_writel(old0, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ }
}
}
@@ -2144,7 +2176,7 @@
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
/* save the registers of bank 2-6 */
void omap_gpio_save_context(void)
{
@@ -2240,8 +2272,7 @@
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -2300,8 +2331,7 @@
/* FIXME for at least omap2, show pullup/pulldown state */
irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 33fff4e..624e262 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <mach/irqs.h>
#include <plat/mux.h>
+#include <plat/i2c.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
@@ -50,10 +51,10 @@
static struct resource i2c_resources[][2] = {
{ I2C_RESOURCE_BUILDER(0, 0) },
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
#endif
};
@@ -72,10 +73,10 @@
static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
#endif
};
@@ -117,6 +118,11 @@
res[1].start = irq;
}
+ if (cpu_class_is_omap1())
+ omap1_i2c_mux_pins(bus_id);
+ if (cpu_class_is_omap2())
+ omap2_i2c_mux_pins(bus_id);
+
return platform_device_register(pdev);
}
@@ -169,7 +175,7 @@
subsys_initcall(omap_register_i2c_bus_cmdline);
/**
- * omap_plat_register_i2c_bus - register I2C bus with device descriptors
+ * omap_register_i2c_bus - register I2C bus with device descriptors
* @bus_id: bus id counting from number 1
* @clkrate: clock rate of the bus in kHz
* @info: pointer into I2C device descriptor table or NULL
@@ -177,7 +183,7 @@
*
* Returns 0 on success or an error code.
*/
-int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len)
{
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 35b36ca..bb937f3 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -25,17 +25,25 @@
}, \
}
-
+/* Platform flags for the clkdev-OMAP integration code */
#define CK_310 (1 << 0)
-#define CK_7XX (1 << 1)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
-#define CK_16XX (1 << 3)
-#define CK_243X (1 << 4)
-#define CK_242X (1 << 5)
-#define CK_343X (1 << 6)
-#define CK_3430ES1 (1 << 7)
-#define CK_3430ES2 (1 << 8)
-#define CK_443X (1 << 9)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_242X (1 << 4)
+#define CK_243X (1 << 5)
+#define CK_3XXX (1 << 6) /* OMAP3 + AM3 common clocks*/
+#define CK_343X (1 << 7) /* OMAP34xx common clocks */
+#define CK_3430ES1 (1 << 8) /* 34xxES1 only */
+#define CK_3430ES2 (1 << 9) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505 (1 << 10)
+#define CK_3517 (1 << 11)
+#define CK_36XX (1 << 12) /* OMAP36xx/37xx-specific clocks */
+#define CK_443X (1 << 13)
+
+#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */
+
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 94fe2a0..34f7fa9 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -1,9 +1,9 @@
/*
- * arch/arm/plat-omap/include/mach/clock.h
+ * OMAP clock: data structure definitions, function prototypes, shared macros
*
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,12 +22,13 @@
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **, u8 *);
- void (*find_companion)(struct clk *, void __iomem **, u8 *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
struct clksel_rate {
u32 val;
@@ -40,6 +41,50 @@
const struct clksel_rate *rates;
};
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @rate_tolerance: maximum variance allowed from target rate (in Hz)
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs)
+
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX @rate_tolerance should probably be deprecated - currently there
+ * don't seem to be any usecases for DPLL rounding that is not exact.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a differenct structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
struct dpll_data {
void __iomem *mult_div1_reg;
u32 mult_mask;
@@ -51,13 +96,12 @@
unsigned int rate_tolerance;
unsigned long last_rounded_rate;
u16 last_rounded_m;
+ u16 max_multiplier;
u8 last_rounded_n;
u8 min_divider;
u8 max_divider;
- u32 max_tolerance;
- u16 max_multiplier;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
u32 autoidle_mask;
@@ -66,6 +110,7 @@
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
+ u8 flags;
# endif
};
@@ -75,12 +120,10 @@
struct list_head node;
const struct clkops *ops;
const char *name;
- int id;
struct clk *parent;
struct list_head children;
struct list_head sibling; /* node for children */
unsigned long rate;
- __u32 flags;
void __iomem *enable_reg;
unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
@@ -88,9 +131,9 @@
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
+ u8 flags;
+#ifdef CONFIG_ARCH_OMAP2PLUS
void __iomem *clksel_reg;
u32 clksel_mask;
const struct clksel *clksel;
@@ -123,7 +166,7 @@
#endif
};
-extern unsigned int mpurate;
+extern int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
extern void clk_preinit(struct clk *clk);
@@ -134,27 +177,23 @@
extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
+extern struct clk *omap_clk_get_by_name(const char *name);
extern const struct clkops clkops_null;
+extern struct clk dummy_ck;
+
/* Clock flags */
-/* bit 0 is free */
-#define RATE_FIXED (1 << 1) /* Fixed clock rate */
-/* bits 2-4 are free */
-#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 7)
-#define CLOCK_NO_IDLE_PARENT (1 << 8)
-#define DELAYED_APP (1 << 9) /* Delay application of clock */
-#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
-#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
-#define CLOCK_IN_OMAP4430 (1 << 13)
-#define ALWAYS_ENABLED (1 << 14)
-/* bits 13-31 are currently free */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
/* Clksel_rate flags */
#define DEFAULT_RATE (1 << 0)
@@ -162,7 +201,8 @@
#define RATE_IN_243X (1 << 2)
#define RATE_IN_343X (1 << 3) /* rates common to all 343X */
#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */
-#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_36XX (1 << 5)
+#define RATE_IN_4430 (1 << 6)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index eb73482..ba0a6c0 100644
--- a/arch/arm/plat-omap/include/plat/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -4,7 +4,7 @@
* OMAP2/3 clockdomain framework functions
*
* Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -40,65 +40,95 @@
#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2
#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3
-/*
- * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
- * and sleepdeps added when a powerdomain should stay active in hwsup mode;
- * and conversely, removed when the powerdomain should be allowed to go
- * inactive in hwsup mode.
+/**
+ * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
+ * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
+ * @omap_chip: OMAP chip types that this autodep is valid on
+ *
+ * A clockdomain that should have wkdeps and sleepdeps added when a
+ * clockdomain should stay active in hwsup mode; and conversely,
+ * removed when the clockdomain should be allowed to go inactive in
+ * hwsup mode.
+ *
+ * Autodeps are deprecated and should be removed after
+ * omap_hwmod-based fine-grained module idle control is added.
*/
-struct clkdm_pwrdm_autodep {
-
+struct clkdm_autodep {
union {
- /* Name of the powerdomain to add a wkdep/sleepdep on */
const char *name;
-
- /* Powerdomain pointer (looked up at clkdm_init() time) */
- struct powerdomain *ptr;
- } pwrdm;
-
- /* OMAP chip types that this clockdomain dep is valid on */
+ struct clockdomain *ptr;
+ } clkdm;
const struct omap_chip_id omap_chip;
-
};
+/**
+ * struct clkdm_dep - encode dependencies between clockdomains
+ * @clkdm_name: clockdomain name
+ * @clkdm: pointer to the struct clockdomain of @clkdm_name
+ * @omap_chip: OMAP chip types that this dependency is valid on
+ * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
+ * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
+ *
+ * Statically defined. @clkdm is resolved from @clkdm_name at runtime and
+ * should not be pre-initialized.
+ *
+ * XXX Should also include hardware (fixed) dependencies.
+ */
+struct clkdm_dep {
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+ atomic_t wkdep_usecount;
+ atomic_t sleepdep_usecount;
+ const struct omap_chip_id omap_chip;
+};
+
+/**
+ * struct clockdomain - OMAP clockdomain
+ * @name: clockdomain name
+ * @pwrdm: powerdomain containing this clockdomain
+ * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
+ * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
+ * @flags: Clockdomain capability flags
+ * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
+ * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
+ * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
+ * @omap_chip: OMAP chip types that this clockdomain is valid on
+ * @usecount: Usecount tracking
+ * @node: list_head to link all clockdomains together
+ */
struct clockdomain {
-
- /* Clockdomain name */
const char *name;
-
union {
- /* Powerdomain enclosing this clockdomain */
const char *name;
-
- /* Powerdomain pointer assigned at clkdm_register() */
struct powerdomain *ptr;
} pwrdm;
-
- /* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
+ void __iomem *clkstctrl_reg;
const u16 clktrctrl_mask;
-
- /* Clockdomain capability flags */
const u8 flags;
-
- /* OMAP chip types that this clockdomain is valid on */
+ const u8 dep_bit;
+ struct clkdm_dep *wkdep_srcs;
+ struct clkdm_dep *sleepdep_srcs;
const struct omap_chip_id omap_chip;
-
- /* Usecount tracking */
atomic_t usecount;
-
struct list_head node;
-
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
-int clkdm_register(struct clockdomain *clkdm);
-int clkdm_unregister(struct clockdomain *clkdm);
+void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps);
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user);
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
+int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
+int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
+
void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 32c2227..7556e27 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -37,21 +37,30 @@
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-/* IO bases for various OMAP processors */
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
struct omap_globals {
u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
+ unsigned long sdrc; /* SDRAM Controller */
+ unsigned long sms; /* SDRAM Memory Scheduler */
+ unsigned long ctrl; /* System Control Module */
+ unsigned long prm; /* Power and Reset Management */
+ unsigned long cm; /* Clock Management */
+ unsigned long cm2;
+ unsigned long uart1_phys;
+ unsigned long uart2_phys;
+ unsigned long uart3_phys;
+ unsigned long uart4_phys;
};
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_36xx(void);
void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -59,6 +68,7 @@
void omap2_set_globals_sdrc(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap2_set_globals_uart(struct omap_globals *);
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index a745d62..a56deee 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -160,6 +160,14 @@
#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0)
#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4)
+/* AM35XX only CONTROL_GENERAL register offsets */
+#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
+#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
+#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314)
+#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320)
+#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324)
+#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328)
+#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C)
/* 34xx PADCONF register offsets */
#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \
@@ -196,6 +204,9 @@
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+/* 44xx control status register offset */
+#define OMAP44XX_CONTROL_STATUS 0x2c4
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -257,6 +268,32 @@
#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
+/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
+
+/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
+#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
+#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
+#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3)
+#define AM35XX_USBOTGSS_INT_CLR BIT(4)
+#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5)
+#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
+#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
+
+/*AM35XX CONTROL_IP_SW_RESET bits*/
+#define AM35XX_USBOTGSS_SW_RST BIT(0)
+#define AM35XX_CPGMACSS_SW_RST BIT(1)
+#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
+#define AM35XX_HECC_SW_RST BIT(3)
+#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
+
/*
* CONTROL OMAP STATUS register to identify OMAP3 features
*/
@@ -292,8 +329,7 @@
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index a162f58..ed8786c 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -31,6 +31,7 @@
#define __ASM_ARCH_OMAP_CPU_H
#include <linux/bitops.h>
+#include <plat/multi.h>
/*
* Omap device type i.e. EMU/HS/TST/GP/BAD
@@ -44,7 +45,7 @@
int omap_type(void);
struct omap_chip_id {
- u8 oc;
+ u16 oc;
u8 type;
};
@@ -76,75 +77,6 @@
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730, OMAP850
@@ -154,6 +86,7 @@
* cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
* cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430
+ * cpu_is_omap443x(): True for OMAP4430
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@@ -232,7 +165,7 @@
#endif
#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# undef cpu_is_omap242x
# undef cpu_is_omap243x
@@ -240,14 +173,14 @@
# define cpu_is_omap242x() is_omap242x()
# define cpu_is_omap243x() is_omap243x()
# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# undef cpu_is_omap343x
# define cpu_is_omap34xx() is_omap34xx()
# define cpu_is_omap343x() is_omap343x()
# endif
#else
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() 1
# endif
@@ -259,7 +192,7 @@
# undef cpu_is_omap243x
# define cpu_is_omap243x() 1
# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# define cpu_is_omap34xx() 1
# endif
@@ -286,6 +219,7 @@
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
+ * cpu_is_omap4430(): True for OMAP4430
* cpu_is_omap3505(): True for OMAP3505
* cpu_is_omap3517(): True for OMAP3517
*/
@@ -334,6 +268,7 @@
#define cpu_is_omap3505() 0
#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
+#define cpu_is_omap4430() 0
#define cpu_is_omap3630() 0
/*
@@ -371,7 +306,7 @@
# define cpu_is_omap1710() is_omap1710()
#endif
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap2420
# undef cpu_is_omap2422
# undef cpu_is_omap2423
@@ -382,7 +317,7 @@
# define cpu_is_omap2430() is_omap2430()
#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
# undef cpu_is_omap3503
# undef cpu_is_omap3515
@@ -471,9 +406,12 @@
#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
#define CHIP_IS_OMAP3630ES1 (1 << 7)
+#define CHIP_IS_OMAP4430ES1 (1 << 8)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1)
+
/*
* "GE" here represents "greater than or equal to" in terms of ES
* levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
@@ -501,6 +439,7 @@
#define OMAP3_HAS_SGX BIT(2)
#define OMAP3_HAS_NEON BIT(3)
#define OMAP3_HAS_ISP BIT(4)
+#define OMAP3_HAS_192MHZ_CLK BIT(5)
#define OMAP3_HAS_FEATURE(feat,flag) \
static inline unsigned int omap3_has_ ##feat(void) \
@@ -513,5 +452,6 @@
OMAP3_HAS_FEATURE(iva, IVA)
OMAP3_HAS_FEATURE(neon, NEON)
OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
#endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index c66e464..1c529ce 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -233,8 +233,12 @@
void dsi_bus_lock(void);
void dsi_bus_unlock(void);
int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd);
+int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
int dsi_vc_send_null(int channel);
int dsi_vc_send_bta_sync(int channel);
@@ -367,6 +371,10 @@
int (*apply)(struct omap_overlay_manager *mgr);
int (*wait_for_go)(struct omap_overlay_manager *mgr);
+ int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
+
+ int (*enable)(struct omap_overlay_manager *mgr);
+ int (*disable)(struct omap_overlay_manager *mgr);
};
struct omap_dss_device {
@@ -426,16 +434,11 @@
int acb; /* ac-bias pin frequency */
enum omap_panel_config config;
-
- u8 recommended_bpp;
-
- struct omap_dss_device *ctrl;
} panel;
struct {
u8 pixel_size;
struct rfbi_timings rfbi_timings;
- struct omap_dss_device *panel;
} ctrl;
int reset_gpio;
@@ -460,49 +463,6 @@
enum omap_dss_display_state state;
- int (*enable)(struct omap_dss_device *dssdev);
- void (*disable)(struct omap_dss_device *dssdev);
-
- int (*suspend)(struct omap_dss_device *dssdev);
- int (*resume)(struct omap_dss_device *dssdev);
-
- void (*get_resolution)(struct omap_dss_device *dssdev,
- u16 *xres, u16 *yres);
- int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
-
- int (*check_timings)(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings);
- void (*set_timings)(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings);
- void (*get_timings)(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings);
- int (*update)(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h);
- int (*sync)(struct omap_dss_device *dssdev);
- int (*wait_vsync)(struct omap_dss_device *dssdev);
-
- int (*set_update_mode)(struct omap_dss_device *dssdev,
- enum omap_dss_update_mode);
- enum omap_dss_update_mode (*get_update_mode)
- (struct omap_dss_device *dssdev);
-
- int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
- int (*get_te)(struct omap_dss_device *dssdev);
-
- u8 (*get_rotate)(struct omap_dss_device *dssdev);
- int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
-
- bool (*get_mirror)(struct omap_dss_device *dssdev);
- int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
-
- int (*run_test)(struct omap_dss_device *dssdev, int test);
- int (*memory_read)(struct omap_dss_device *dssdev,
- void *buf, size_t size,
- u16 x, u16 y, u16 w, u16 h);
-
- int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
- u32 (*get_wss)(struct omap_dss_device *dssdev);
-
/* platform specific */
int (*platform_enable)(struct omap_dss_device *dssdev);
void (*platform_disable)(struct omap_dss_device *dssdev);
@@ -522,11 +482,17 @@
int (*resume)(struct omap_dss_device *display);
int (*run_test)(struct omap_dss_device *display, int test);
- void (*setup_update)(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h);
+ int (*set_update_mode)(struct omap_dss_device *dssdev,
+ enum omap_dss_update_mode);
+ enum omap_dss_update_mode (*get_update_mode)(
+ struct omap_dss_device *dssdev);
+
+ int (*update)(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h);
+ int (*sync)(struct omap_dss_device *dssdev);
int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
- int (*wait_for_te)(struct omap_dss_device *dssdev);
+ int (*get_te)(struct omap_dss_device *dssdev);
u8 (*get_rotate)(struct omap_dss_device *dssdev);
int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
@@ -537,6 +503,20 @@
int (*memory_read)(struct omap_dss_device *dssdev,
void *buf, size_t size,
u16 x, u16 y, u16 w, u16 h);
+
+ void (*get_resolution)(struct omap_dss_device *dssdev,
+ u16 *xres, u16 *yres);
+ int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+ int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+ u32 (*get_wss)(struct omap_dss_device *dssdev);
};
int omap_dss_register_driver(struct omap_dss_driver *);
@@ -561,6 +541,10 @@
int omap_dss_get_num_overlays(void);
struct omap_overlay *omap_dss_get_overlay(int num);
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
+ u16 *xres, u16 *yres);
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev);
+
typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
@@ -572,4 +556,35 @@
#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+void omapdss_dsi_vc_enable_hs(int channel, bool enable);
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+ int channel,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(int, void *), void *data);
+
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
+void dpi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+int dpi_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(void *), void *data);
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
new file mode 100644
index 0000000..1f767cb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dma-44xx.h
@@ -0,0 +1,147 @@
+/*
+ * OMAP4 SDMA channel definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+
+#define OMAP44XX_DMA_SYS_REQ0 2
+#define OMAP44XX_DMA_SYS_REQ1 3
+#define OMAP44XX_DMA_GPMC 4
+#define OMAP44XX_DMA_DSS_DISPC_REQ 6
+#define OMAP44XX_DMA_SYS_REQ2 7
+#define OMAP44XX_DMA_MCASP1_AXEVT 8
+#define OMAP44XX_DMA_ISS_REQ1 9
+#define OMAP44XX_DMA_ISS_REQ2 10
+#define OMAP44XX_DMA_MCASP1_AREVT 11
+#define OMAP44XX_DMA_ISS_REQ3 12
+#define OMAP44XX_DMA_ISS_REQ4 13
+#define OMAP44XX_DMA_DSS_RFBI_REQ 14
+#define OMAP44XX_DMA_SPI3_TX0 15
+#define OMAP44XX_DMA_SPI3_RX0 16
+#define OMAP44XX_DMA_MCBSP2_TX 17
+#define OMAP44XX_DMA_MCBSP2_RX 18
+#define OMAP44XX_DMA_MCBSP3_TX 19
+#define OMAP44XX_DMA_MCBSP3_RX 20
+#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
+#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
+#define OMAP44XX_DMA_SPI3_TX1 23
+#define OMAP44XX_DMA_SPI3_RX1 24
+#define OMAP44XX_DMA_I2C3_TX 25
+#define OMAP44XX_DMA_I2C3_RX 26
+#define OMAP44XX_DMA_I2C1_TX 27
+#define OMAP44XX_DMA_I2C1_RX 28
+#define OMAP44XX_DMA_I2C2_TX 29
+#define OMAP44XX_DMA_I2C2_RX 30
+#define OMAP44XX_DMA_MCBSP4_TX 31
+#define OMAP44XX_DMA_MCBSP4_RX 32
+#define OMAP44XX_DMA_MCBSP1_TX 33
+#define OMAP44XX_DMA_MCBSP1_RX 34
+#define OMAP44XX_DMA_SPI1_TX0 35
+#define OMAP44XX_DMA_SPI1_RX0 36
+#define OMAP44XX_DMA_SPI1_TX1 37
+#define OMAP44XX_DMA_SPI1_RX1 38
+#define OMAP44XX_DMA_SPI1_TX2 39
+#define OMAP44XX_DMA_SPI1_RX2 40
+#define OMAP44XX_DMA_SPI1_TX3 41
+#define OMAP44XX_DMA_SPI1_RX3 42
+#define OMAP44XX_DMA_SPI2_TX0 43
+#define OMAP44XX_DMA_SPI2_RX0 44
+#define OMAP44XX_DMA_SPI2_TX1 45
+#define OMAP44XX_DMA_SPI2_RX1 46
+#define OMAP44XX_DMA_MMC2_TX 47
+#define OMAP44XX_DMA_MMC2_RX 48
+#define OMAP44XX_DMA_UART1_TX 49
+#define OMAP44XX_DMA_UART1_RX 50
+#define OMAP44XX_DMA_UART2_TX 51
+#define OMAP44XX_DMA_UART2_RX 52
+#define OMAP44XX_DMA_UART3_TX 53
+#define OMAP44XX_DMA_UART3_RX 54
+#define OMAP44XX_DMA_UART4_TX 55
+#define OMAP44XX_DMA_UART4_RX 56
+#define OMAP44XX_DMA_MMC4_TX 57
+#define OMAP44XX_DMA_MMC4_RX 58
+#define OMAP44XX_DMA_MMC5_TX 59
+#define OMAP44XX_DMA_MMC5_RX 60
+#define OMAP44XX_DMA_MMC1_TX 61
+#define OMAP44XX_DMA_MMC1_RX 62
+#define OMAP44XX_DMA_SYS_REQ3 64
+#define OMAP44XX_DMA_MCPDM_UP 65
+#define OMAP44XX_DMA_MCPDM_DL 66
+#define OMAP44XX_DMA_DMIC_REQ 67
+#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
+#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
+#define OMAP44XX_DMA_SPI4_TX0 70
+#define OMAP44XX_DMA_SPI4_RX0 71
+#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
+#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
+#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
+#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
+#define OMAP44XX_DMA_DSS_HDMI_REQ 76
+#define OMAP44XX_DMA_MMC3_TX 77
+#define OMAP44XX_DMA_MMC3_RX 78
+#define OMAP44XX_DMA_USIM_TX 79
+#define OMAP44XX_DMA_USIM_RX 80
+#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
+#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
+#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
+#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
+#define OMAP44XX_DMA_SLIMBUS1_TX0 85
+#define OMAP44XX_DMA_SLIMBUS1_TX1 86
+#define OMAP44XX_DMA_SLIMBUS1_TX2 87
+#define OMAP44XX_DMA_SLIMBUS1_TX3 88
+#define OMAP44XX_DMA_SLIMBUS1_RX0 89
+#define OMAP44XX_DMA_SLIMBUS1_RX1 90
+#define OMAP44XX_DMA_SLIMBUS1_RX2 91
+#define OMAP44XX_DMA_SLIMBUS1_RX3 92
+#define OMAP44XX_DMA_SLIMBUS2_TX0 93
+#define OMAP44XX_DMA_SLIMBUS2_TX1 94
+#define OMAP44XX_DMA_SLIMBUS2_TX2 95
+#define OMAP44XX_DMA_SLIMBUS2_TX3 96
+#define OMAP44XX_DMA_SLIMBUS2_RX0 97
+#define OMAP44XX_DMA_SLIMBUS2_RX1 98
+#define OMAP44XX_DMA_SLIMBUS2_RX2 99
+#define OMAP44XX_DMA_SLIMBUS2_RX3 100
+#define OMAP44XX_DMA_ABE_REQ_0 101
+#define OMAP44XX_DMA_ABE_REQ_1 102
+#define OMAP44XX_DMA_ABE_REQ_2 103
+#define OMAP44XX_DMA_ABE_REQ_3 104
+#define OMAP44XX_DMA_ABE_REQ_4 105
+#define OMAP44XX_DMA_ABE_REQ_5 106
+#define OMAP44XX_DMA_ABE_REQ_6 107
+#define OMAP44XX_DMA_ABE_REQ_7 108
+#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
+#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
+#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
+#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
+#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
+#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
+#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
+#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
+#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
+#define OMAP44XX_DMA_SHA2_CTXIN_P 118
+#define OMAP44XX_DMA_SHA2_DIN_P 119
+#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
+#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
+#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
+#define OMAP44XX_DMA_I2C4_TX 124
+#define OMAP44XX_DMA_I2C4_RX 125
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 4ede9e1..02232ca 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -21,6 +21,9 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
+
/* Hardware registers for omap1 */
#define OMAP1_DMA_BASE (0xfffed800)
@@ -316,89 +319,6 @@
#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-/* DMA request lines for 44xx */
-#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */
-#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */
-#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */
-#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */
-#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */
-#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */
-#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */
-#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */
-#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */
-#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */
-#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */
-#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */
-#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */
-#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */
-#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */
-#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */
-#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */
-#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */
-#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */
-#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */
-#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */
-#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */
-#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */
-#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */
-#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */
-#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */
-#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */
-#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */
-#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */
-#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */
-#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */
-#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */
-#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */
-#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */
-#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */
-#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */
-#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */
-
/*----------------------------------------------------------------------------*/
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
new file mode 100644
index 0000000..3e63270
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -0,0 +1,16 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+extern void omap1_set_vpp(struct map_info *map, int enable);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index e081338..145838a 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -27,6 +27,8 @@
#define GPMC_CONFIG 0x50
#define GPMC_STATUS 0x54
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
@@ -110,6 +112,6 @@
extern int gpmc_prefetch_status(void);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern void __init gpmc_init(void);
+extern void gpmc_init(void);
#endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 585d9ca..87f6bf2 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -34,6 +34,5 @@
}
#endif
-int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len);
+void __init omap1_i2c_mux_pins(int bus_id);
+void __init omap2_i2c_mux_pins(int bus_id);
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index a3e7b47..128b549 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -158,10 +158,6 @@
* VPOM3430 was not working for Int controller
*/
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
-#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_34XX_SIZE SZ_1M
-
#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
/* 0x49000000 --> 0xfb000000 */
#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
@@ -204,11 +200,6 @@
#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_44XX_SIZE SZ_4M
-
-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
-#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_44XX_SIZE SZ_1M
-
#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
/* 0x48000000 --> 0xfa000000 */
#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
@@ -268,7 +259,38 @@
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
-extern void omap2_map_common_io(void);
+#ifdef CONFIG_ARCH_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
new file mode 100644
index 0000000..518322c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irqs-44xx.h
@@ -0,0 +1,144 @@
+/*
+ * OMAP4 Interrupt lines definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+
+/* OMAP44XX IRQs numbers definitions */
+#define OMAP44XX_IRQ_LOCALTIMER 29
+#define OMAP44XX_IRQ_LOCALWDT 30
+
+#define OMAP44XX_IRQ_GIC_START 32
+
+#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c0ab7c8..b65088a 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -28,6 +28,9 @@
#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
#define __ASM_ARCH_OMAP15XX_IRQS_H
+/* All OMAP4 specific defines are moved to irqs-44xx.h */
+#include "irqs-44xx.h"
+
/*
* IRQ numbers for interrupt handler 1
*
@@ -344,95 +347,16 @@
#define INT_34XX_BENCH_MPU_EMUL 3
-
-#define IRQ_GIC_START 32
-#define INT_44XX_LOCALTIMER_IRQ 29
-#define INT_44XX_LOCALWDT_IRQ 30
-
-#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
-#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
-#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
-#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
-#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
-#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
-#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
-#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
-#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
-#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
-#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
-#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
-#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
-#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
-#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
-#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
-#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
-#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
-#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
-#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
-#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
-#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
-#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
-
-#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
-#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
-#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
-
-#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
-#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
-#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
-#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
-#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
-#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
-#define INT_44XX_MMC5_IRQ (59 + IRQ_GIC_START)
-#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
-#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
-#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
-#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
-#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
-#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
-#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
-#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
-#define INT_44XX_MMC4_IRQ (96 + IRQ_GIC_START)
-
+#define INT_35XX_HECC0_IRQ 24
+#define INT_35XX_HECC1_IRQ 28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
+#define INT_35XX_USBOTG_IRQ 71
+#define INT_35XX_CCDC_VD0_IRQ 88
+#define INT_35XX_CCDC_VD1_IRQ 92
+#define INT_35XX_CCDC_VD2_IRQ 93
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 4f22e5b..3974835 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -49,6 +49,9 @@
#define OMAP34XX_MCBSP1_BASE 0x48074000
#define OMAP34XX_MCBSP2_BASE 0x49022000
+#define OMAP34XX_MCBSP2_ST_BASE 0x49028000
+#define OMAP34XX_MCBSP3_BASE 0x49024000
+#define OMAP34XX_MCBSP3_ST_BASE 0x4902A000
#define OMAP34XX_MCBSP3_BASE 0x49024000
#define OMAP34XX_MCBSP4_BASE 0x49026000
#define OMAP34XX_MCBSP5_BASE 0x48096000
@@ -103,8 +106,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#else
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
@@ -147,6 +149,15 @@
#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
#define OMAP_MCBSP_REG_XCCR 0xAC
#define OMAP_MCBSP_REG_RCCR 0xB0
+#define OMAP_MCBSP_REG_SSELCR 0xBC
+
+#define OMAP_ST_REG_REV 0x00
+#define OMAP_ST_REG_SYSCONFIG 0x10
+#define OMAP_ST_REG_IRQSTATUS 0x18
+#define OMAP_ST_REG_IRQENABLE 0x1C
+#define OMAP_ST_REG_SGAINCR 0x24
+#define OMAP_ST_REG_SFIRCR 0x28
+#define OMAP_ST_REG_SSELCR 0x2C
#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -265,6 +276,24 @@
#define ENAWAKEUP 0x0004
#define SOFTRST 0x0002
+/********************** McBSP SSELCR bit definitions ***********************/
+#define SIDETONEEN 0x0400
+
+/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/
+#define ST_AUTOIDLE 0x0001
+
+/********************** McBSP Sidetone SGAINCR bit definitions *************/
+#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */
+#define ST_CH0GAIN(value) (value) /* Bits 0:15 */
+
+/********************** McBSP Sidetone SFIRCR bit definitions **************/
+#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */
+
+/********************** McBSP Sidetone SSELCR bit definitions **************/
+#define ST_COEFFWRDONE 0x0004
+#define ST_COEFFWREN 0x0002
+#define ST_SIDETONEEN 0x0001
+
/********************** McBSP DMA operating modes **************************/
#define MCBSP_DMA_MODE_ELEMENT 0
#define MCBSP_DMA_MODE_THRESHOLD 1
@@ -374,11 +403,23 @@
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+ /* Sidetone block for McBSP 2 and 3 */
+ unsigned long phys_base_st;
u16 buffer_size;
#endif
};
+struct omap_mcbsp_st_data {
+ void __iomem *io_base_st;
+ bool running;
+ bool enabled;
+ s16 taps[128]; /* Sidetone filter coefficients */
+ int nr_taps; /* Number of filter coefficients in use */
+ s16 ch0gain;
+ s16 ch1gain;
+};
+
struct omap_mcbsp {
struct device *dev;
unsigned long phys_base;
@@ -410,20 +451,22 @@
struct omap_mcbsp_platform_data *pdata;
struct clk *iclk;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+ struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
#endif
+ void *reg_cache;
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count;
+extern int omap_mcbsp_count, omap_mcbsp_cache_size;
int omap_mcbsp_init(void);
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -459,4 +502,21 @@
int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
+#ifdef CONFIG_ARCH_OMAP3
+/* Sidetone specific API */
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
+int omap_st_enable(unsigned int id);
+int omap_st_disable(unsigned int id);
+int omap_st_is_enabled(unsigned int id);
+#else
+static inline int omap_st_set_chgain(unsigned int id, int channel,
+ s16 chgain) { return 0; }
+static inline int omap_st_get_chgain(unsigned int id, int channel,
+ s16 *chgain) { return 0; }
+static inline int omap_st_enable(unsigned int id) { return 0; }
+static inline int omap_st_disable(unsigned int id) { return 0; }
+static inline int omap_st_is_enabled(unsigned int id) { return 0; }
+#endif
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index 3325f7b..d5306be 100644
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -38,8 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
+#else
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf6..4a970ec 100644
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
@@ -40,7 +40,7 @@
extern int menelaus_set_regulator_sleep(int enable, u32 val);
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
#define omap_has_menelaus() 1
#else
#define omap_has_menelaus() 0
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 2993713..a1bac07 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -55,12 +55,12 @@
unsigned int max_freq;
/* switch the bus to a new slot */
- int (* switch_slot)(struct device *dev, int slot);
+ int (*switch_slot)(struct device *dev, int slot);
/* initialize board-specific MMC functionality, can be NULL if
* not supported */
- int (* init)(struct device *dev);
- void (* cleanup)(struct device *dev);
- void (* shutdown)(struct device *dev);
+ int (*init)(struct device *dev);
+ void (*cleanup)(struct device *dev);
+ void (*shutdown)(struct device *dev);
/* To handle board related suspend/resume functionality for MMC */
int (*suspend)(struct device *dev, int slot);
@@ -96,14 +96,28 @@
/* Try to sleep or power off when possible */
unsigned power_saving:1;
+ /* If using power_saving and the MMC power is not to go off */
+ unsigned no_off:1;
+
+ /* Regulator off remapped to sleep */
+ unsigned vcc_aux_disable_is_sleep:1;
+
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
- int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
- int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
- int (* get_ro)(struct device *dev, int slot);
+ int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
+ int (*set_power)(struct device *dev, int slot,
+ int power_on, int vdd);
+ int (*get_ro)(struct device *dev, int slot);
int (*set_sleep)(struct device *dev, int slot, int sleep,
int vdd, int cardsleep);
+ void (*remux)(struct device *dev, int slot, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int slot,
+ int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int slot,
+ int power_on, int vdd);
/* return MMC cover switch state, can be NULL if not supported.
*
@@ -111,14 +125,14 @@
* 0 - closed
* 1 - open
*/
- int (* get_cover_state)(struct device *dev, int slot);
+ int (*get_cover_state)(struct device *dev, int slot);
const char *name;
u32 ocr_mask;
/* Card detection IRQs */
int card_detect_irq;
- int (* card_detect)(int irq);
+ int (*card_detect)(struct device *dev, int slot);
unsigned int ban_openended:1;
@@ -126,7 +140,8 @@
};
/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+ int is_closed);
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
new file mode 100644
index 0000000..f235d32
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -0,0 +1,94 @@
+/*
+ * Support for compiling in multiple OMAP processors
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PLAT_OMAP_MULTI_H
+#define __PLAT_OMAP_MULTI_H
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+# error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3430
+# endif
+#endif
+
+#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 692c90e..c7472a2 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -135,7 +135,7 @@
const unsigned int mux_reg;
unsigned char debug;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
const unsigned char mask_offset;
const unsigned char mask;
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 631a7be..6ba88d2 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -15,10 +15,18 @@
int cs;
int gpio_irq;
struct mtd_partition *parts;
+ struct gpmc_timings *gpmc_t;
int nr_parts;
- int (*nand_setup)(void __iomem *);
+ int (*nand_setup)(void);
int (*dev_ready)(struct omap_nand_platform_data *);
int dma_channel;
+ unsigned long phys_base;
void __iomem *gpmc_cs_baseaddr;
void __iomem *gpmc_baseaddr;
+ int devsize;
};
+
+/* size (4 KiB) for IO mapping */
+#define NAND_IO_SIZE SZ_4K
+
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 7560b4d..e69e1d8 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -125,43 +125,43 @@
#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR (OMAP_UART3_BASE + 0)
-#define UART3_THR (OMAP_UART3_BASE + 0)
-#define UART3_DLL (OMAP_UART3_BASE + 0)
-#define UART3_IER (OMAP_UART3_BASE + 4)
-#define UART3_DLH (OMAP_UART3_BASE + 4)
-#define UART3_IIR (OMAP_UART3_BASE + 8)
-#define UART3_FCR (OMAP_UART3_BASE + 8)
-#define UART3_EFR (OMAP_UART3_BASE + 8)
-#define UART3_LCR (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1 (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2 (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR (OMAP_UART3_BASE + 0x50)
+#define UART3_RHR (OMAP1_UART3_BASE + 0)
+#define UART3_THR (OMAP1_UART3_BASE + 0)
+#define UART3_DLL (OMAP1_UART3_BASE + 0)
+#define UART3_IER (OMAP1_UART3_BASE + 4)
+#define UART3_DLH (OMAP1_UART3_BASE + 4)
+#define UART3_IIR (OMAP1_UART3_BASE + 8)
+#define UART3_FCR (OMAP1_UART3_BASE + 8)
+#define UART3_EFR (OMAP1_UART3_BASE + 8)
+#define UART3_LCR (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR (OMAP1_UART3_BASE + 0x50)
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc..7055672 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -23,8 +23,8 @@
*
*/
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
/*
* Please place only base defines here and put the rest in device
@@ -85,5 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-#endif /* __ASM_ARCH_OMAP24XX_H */
+#endif /* __ASM_ARCH_OMAP2_H */
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 077f059..2845fdc 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -21,8 +21,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
/*
* Please place only base defines here and put the rest in device
@@ -82,5 +82,5 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-#endif /* __ASM_ARCH_OMAP34XX_H */
+#endif /* __ASM_ARCH_OMAP3_H */
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index ef870de..2302474 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -40,9 +40,13 @@
#define OMAP44XX_GIC_CPU_BASE 0x48240100
#define OMAP44XX_SCU_BASE 0x48240000
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_L2CACHE_BASE 0x48242000
#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_MCPDM_BASE 0x40132000
+#define OMAP44XX_MCPDM_L3_BASE 0x49032000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
#endif /* __ASM_ARCH_OMAP44XX_H */
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index dc1fac1..3694b62 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -62,6 +62,7 @@
*
*/
struct omap_device {
+ u32 magic;
struct platform_device pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
@@ -81,6 +82,7 @@
/* Core code interface */
+bool omap_device_is_valid(struct omap_device *od);
int omap_device_count_resources(struct omap_device *od);
int omap_device_fill_resources(struct omap_device *od, struct resource *res);
@@ -88,15 +90,16 @@
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt);
+ int pm_lats_cnt, int is_early_device);
struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt);
+ int pm_lats_cnt, int is_early_device);
int omap_device_register(struct omap_device *od);
+int omap_early_device_register(struct omap_device *od);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -131,11 +134,15 @@
*/
struct omap_device_pm_latency {
u32 deactivate_lat;
+ u32 deactivate_lat_worst;
int (*deactivate_func)(struct omap_device *od);
u32 activate_lat;
+ u32 activate_lat_worst;
int (*activate_func)(struct omap_device *od);
+ u32 flags;
};
+#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
#define to_omap_device(x) container_of((x), struct omap_device, pdev)
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 3393325..440b416 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -4,7 +4,7 @@
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
- * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Created in collaboration with (alphabetical order): Benoît Cousson,
* Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
* Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
*
@@ -33,25 +33,42 @@
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
+#include <linux/list.h>
#include <linux/ioport.h>
-
#include <plat/cpu.h>
struct omap_device;
-/* OCP SYSCONFIG bit shifts/masks */
-#define SYSC_MIDLEMODE_SHIFT 12
-#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT)
-#define SYSC_CLOCKACTIVITY_SHIFT 8
-#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
-#define SYSC_SIDLEMODE_SHIFT 3
-#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT)
-#define SYSC_ENAWAKEUP_SHIFT 2
-#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT)
-#define SYSC_SOFTRESET_SHIFT 1
-#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT)
-#define SYSC_AUTOIDLE_SHIFT 0
-#define SYSC_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT)
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
+ * with the original PRCM protocol defined for OMAP2420
+ */
+#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
+#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
+#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
+#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_SHIFT 1
+#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
+#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
+ * with the new PRCM protocol defined for new OMAP4 IPs.
+ */
+#define SYSC_TYPE2_SOFTRESET_SHIFT 0
+#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
+#define SYSC_TYPE2_SIDLEMODE_SHIFT 2
+#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
+#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
+#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
@@ -62,7 +79,6 @@
#define HWMOD_IDLEMODE_NO (1 << 1)
#define HWMOD_IDLEMODE_SMART (1 << 2)
-
/**
* struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
* @name: name of the IRQ channel (module local name)
@@ -94,8 +110,7 @@
/**
* struct omap_hwmod_opt_clk - optional clocks used by this hwmod
* @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clkdev_dev_id: opt clock: clkdev dev_id string
- * @clkdev_con_id: opt clock: clkdev con_id string
+ * @clk: opt clock: OMAP clock name
* @_clk: pointer to the struct clk (filled in at runtime)
*
* The module's interface clock and main functional clock should not
@@ -103,8 +118,7 @@
*/
struct omap_hwmod_opt_clk {
const char *role;
- const char *clkdev_dev_id;
- const char *clkdev_con_id;
+ const char *clk;
struct clk *_clk;
};
@@ -171,8 +185,7 @@
* @master: struct omap_hwmod that initiates OCP transactions on this link
* @slave: struct omap_hwmod that responds to OCP transactions on this link
* @addr: address space associated with this link
- * @clkdev_dev_id: interface clock: clkdev dev_id string
- * @clkdev_con_id: interface clock: clkdev con_id string
+ * @clk: interface clock: OMAP clock name
* @_clk: pointer to the interface struct clk (filled in at runtime)
* @fw: interface firewall data
* @addr_cnt: ARRAY_SIZE(@addr)
@@ -191,8 +204,7 @@
struct omap_hwmod *master;
struct omap_hwmod *slave;
struct omap_hwmod_addr_space *addr;
- const char *clkdev_dev_id;
- const char *clkdev_con_id;
+ const char *clk;
struct clk *_clk;
union {
struct omap_hwmod_omap2_firewall omap2;
@@ -236,7 +248,25 @@
#define CLOCKACT_TEST_NONE 0x3
/**
- * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
+ * @midle_shift: Offset of the midle bit
+ * @clkact_shift: Offset of the clockactivity bit
+ * @sidle_shift: Offset of the sidle bit
+ * @enwkup_shift: Offset of the enawakeup bit
+ * @srst_shift: Offset of the softreset bit
+ * @autoidle_shift: Offset of the autoidle bit
+ */
+struct omap_hwmod_sysc_fields {
+ u8 midle_shift;
+ u8 clkact_shift;
+ u8 sidle_shift;
+ u8 enwkup_shift;
+ u8 srst_shift;
+ u8 autoidle_shift;
+};
+
+/**
+ * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
@@ -252,14 +282,22 @@
* been associated with the clocks marked in @clockact. This field is
* only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
*
+ * @sysc_fields: structure containing the offset positions of various bits in
+ * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
+ * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
+ * whether the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
+ * If the device follows a different scheme for the sysconfig register ,
+ * then this field has to be populated with the correct offset structure.
*/
-struct omap_hwmod_sysconfig {
+struct omap_hwmod_class_sysconfig {
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
u8 idlemodes;
u8 sysc_flags;
u8 clockact;
+ struct omap_hwmod_sysc_fields *sysc_fields;
};
/**
@@ -352,19 +390,33 @@
#define _HWMOD_STATE_DISABLED 6
/**
+ * struct omap_hwmod_class - the type of an IP block
+ * @name: name of the hwmod_class
+ * @sysc: device SYSCONFIG/SYSSTATUS register data
+ * @rev: revision of the IP class
+ *
+ * Represent the class of a OMAP hardware "modules" (e.g. timer,
+ * smartreflex, gpio, uart...)
+ */
+struct omap_hwmod_class {
+ const char *name;
+ struct omap_hwmod_class_sysconfig *sysc;
+ u32 rev;
+};
+
+/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
+ * @class: struct omap_hwmod_class * to the class of this hwmod
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
* @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
* @prcm: PRCM data pertaining to this hwmod
- * @clkdev_dev_id: main clock: clkdev dev_id string
- * @clkdev_con_id: main clock: clkdev con_id string
+ * @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
- * @sysconfig: device SYSCONFIG/SYSSTATUS register data
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_rt_va: cached register target start address (internal use)
@@ -383,16 +435,17 @@
* @omap_chip: OMAP chips this hwmod is present on
* @node: list node for hwmod list (internal use)
*
- * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
- * clock," which for our purposes is defined as "the functional clock needed
- * for register accesses to complete." Modules may not have a main clock if
- * the interface clock also serves as a main clock.
+ * @main_clk refers to this module's "main clock," which for our
+ * purposes is defined as "the functional clock needed for register
+ * accesses to complete." Modules may not have a main clock if the
+ * interface clock also serves as a main clock.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod {
const char *name;
+ struct omap_hwmod_class *class;
struct omap_device *od;
struct omap_hwmod_irq_info *mpu_irqs;
struct omap_hwmod_dma_info *sdma_chs;
@@ -400,13 +453,11 @@
struct omap_hwmod_omap2_prcm omap2;
struct omap_hwmod_omap4_prcm omap4;
} prcm;
- const char *clkdev_dev_id;
- const char *clkdev_con_id;
+ const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
- struct omap_hwmod_sysconfig *sysconfig;
void *dev_attr;
u32 _sysc_cache;
void __iomem *_rt_va;
@@ -441,6 +492,8 @@
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
@@ -465,4 +518,17 @@
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_for_each_by_class(const char *classname,
+ int (*fn)(struct omap_hwmod *oh,
+ void *user),
+ void *user);
+
+/*
+ * Chip variant-specific hwmod init routines - XXX should be converted
+ * to use initcalls once the initial boot ordering is straightened out
+ */
+extern int omap2420_hwmod_init(void);
+extern int omap2430_hwmod_init(void);
+extern int omap3xxx_hwmod_init(void);
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index 0b96005..d82b2c0 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -1,8 +1,8 @@
/*
* OMAP2/3 powerdomain control
*
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -37,6 +37,9 @@
#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \
(1 << PWRDM_POWER_RET))
+#define PWRSTS_RET_ON ((1 << PWRDM_POWER_RET) | \
+ (1 << PWRDM_POWER_ON))
+
#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
@@ -48,16 +51,16 @@
*/
/*
- * Number of memory banks that are power-controllable. On OMAP3430, the
- * maximum is 4.
+ * Number of memory banks that are power-controllable. On OMAP4430, the
+ * maximum is 5.
*/
-#define PWRDM_MAX_MEM_BANKS 4
+#define PWRDM_MAX_MEM_BANKS 5
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP3 is the worst case
+ * CORE powerdomain on OMAP4 is the worst case
*/
-#define PWRDM_MAX_CLKDMS 4
+#define PWRDM_MAX_CLKDMS 9
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
@@ -65,65 +68,40 @@
struct clockdomain;
struct powerdomain;
-/* Encodes dependencies between powerdomains - statically defined */
-struct pwrdm_dep {
-
- /* Powerdomain name */
- const char *pwrdm_name;
-
- /* Powerdomain pointer - resolved by the powerdomain code */
- struct powerdomain *pwrdm;
-
- /* Flags to mark OMAP chip restrictions, etc. */
- const struct omap_chip_id omap_chip;
-
-};
-
+/**
+ * struct powerdomain - OMAP powerdomain
+ * @name: Powerdomain name
+ * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @prcm_offs: the address offset from CM_BASE/PRM_BASE
+ * @pwrsts: Possible powerdomain power states
+ * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
+ * @flags: Powerdomain flags
+ * @banks: Number of software-controllable memory banks in this powerdomain
+ * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
+ * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
+ * @pwrdm_clkdms: Clockdomains in this powerdomain
+ * @node: list_head linking all powerdomains
+ * @state:
+ * @state_counter:
+ * @timer:
+ * @state_timer:
+ */
struct powerdomain {
-
- /* Powerdomain name */
const char *name;
-
- /* the address offset from CM_BASE/PRM_BASE */
- const s16 prcm_offs;
-
- /* Used to represent the OMAP chip types containing this pwrdm */
const struct omap_chip_id omap_chip;
-
- /* Powerdomains that can be told to wake this powerdomain up */
- struct pwrdm_dep *wkdep_srcs;
-
- /* Powerdomains that can be told to keep this pwrdm from inactivity */
- struct pwrdm_dep *sleepdep_srcs;
-
- /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
- const u8 dep_bit;
-
- /* Possible powerdomain power states */
+ const s16 prcm_offs;
const u8 pwrsts;
-
- /* Possible logic power states when pwrdm in RETENTION */
const u8 pwrsts_logic_ret;
-
- /* Powerdomain flags */
const u8 flags;
-
- /* Number of software-controllable memory banks in this powerdomain */
const u8 banks;
-
- /* Possible memory bank pwrstates when pwrdm in RETENTION */
const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
-
- /* Possible memory bank pwrstates when pwrdm is ON */
const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
-
- /* Clockdomains in this powerdomain */
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
-
struct list_head node;
-
int state;
unsigned state_counter[PWRDM_MAX_PWRSTS];
+ unsigned ret_logic_off_counter;
+ unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
#ifdef CONFIG_PM_DEBUG
s64 timer;
@@ -134,8 +112,6 @@
void pwrdm_init(struct powerdomain **pwrdm_list);
-int pwrdm_register(struct powerdomain *pwrdm);
-int pwrdm_unregister(struct powerdomain *pwrdm);
struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
@@ -149,13 +125,6 @@
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
-int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
@@ -170,8 +139,10 @@
int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index e63e94e..d6a0e27 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -25,7 +25,8 @@
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name);
#define START_PADCONF_SAVE 0x2
#define PADCONF_SAVE_DONE 0x1
@@ -33,6 +34,14 @@
void omap3_prcm_save_context(void);
void omap3_prcm_restore_context(void);
+u32 prm_read_mod_reg(s16 module, u16 idx);
+void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 cm_read_mod_reg(s16 module, u16 idx);
+void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index f5a4a92..83dce4c 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,37 +15,65 @@
#include <linux/init.h>
-#if defined(CONFIG_ARCH_OMAP1)
/* OMAP1 serial ports */
-#define OMAP_UART1_BASE 0xfffb0000
-#define OMAP_UART2_BASE 0xfffb0800
-#define OMAP_UART3_BASE 0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
/* OMAP2 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x4806e000
-#elif defined(CONFIG_ARCH_OMAP3)
+#define OMAP2_UART1_BASE 0x4806a000
+#define OMAP2_UART2_BASE 0x4806c000
+#define OMAP2_UART3_BASE 0x4806e000
+
/* OMAP3 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x49020000
-#elif defined(CONFIG_ARCH_OMAP4)
+#define OMAP3_UART1_BASE OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE 0x49020000
+#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+
/* OMAP4 serial ports */
-#define OMAP_UART1_BASE 0x4806a000
-#define OMAP_UART2_BASE 0x4806c000
-#define OMAP_UART3_BASE 0x48020000
-#define OMAP_UART4_BASE 0x4806e000
-#endif
+#define OMAP4_UART1_BASE OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE 0x48020000
+#define OMAP4_UART4_BASE 0x4806e000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE 0x10000000
+#define ZOOM_UART_VIRT 0xfb000000
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+#define ZOOM_PORT_SHIFT 1
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+#define OMAP2UART1 21
+#define OMAP2UART2 22
+#define OMAP2UART3 23
+#define OMAP3UART1 OMAP2UART1
+#define OMAP3UART2 OMAP2UART2
+#define OMAP3UART3 33
+#define OMAP3UART4 34 /* Only on 36xx */
+#define OMAP4UART1 OMAP2UART1
+#define OMAP4UART2 OMAP2UART2
+#define OMAP4UART3 43
+#define OMAP4UART4 44
+#define ZOOM_UART 95 /* Only on zoom2/3 */
+
+/* This is only used by 8250.c for omap1510 */
#define is_omap_port(pt) ({int __ret = 0; \
- if ((pt)->port.mapbase == OMAP_UART1_BASE || \
- (pt)->port.mapbase == OMAP_UART2_BASE || \
- (pt)->port.mapbase == OMAP_UART3_BASE) \
+ if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
+ (pt)->port.mapbase == OMAP1_UART2_BASE || \
+ (pt)->port.mapbase == OMAP1_UART3_BASE) \
__ret = 1; \
__ret; \
})
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 13c305d..81d9ec5 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,62 +19,38 @@
#include <linux/types.h>
#include <linux/serial_reg.h>
+
+#include <asm/mach-types.h>
+
#include <plat/serial.h>
-unsigned int system_rev;
+static volatile u8 *uart1_base;
+static int uart1_shift;
-#define UART_OMAP_MDR1 0x08 /* mode definition register */
-#define OMAP_ID_730 0x355F
-#define OMAP_ID_850 0x362C
-#define ID_MASK 0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+static volatile u8 *uart_base;
+static int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * See also debug-macro.S, and serial.c for related code.
+ *
+ * Please note that we currently assume that:
+ * - UART1 clocks are enabled for register access
+ * - UART1 scratchpad register can be used
+ */
+static void set_uart1_scratchpad(unsigned char port)
+{
+ uart1_base[UART_SCR << uart1_shift] = port;
+}
static void putc(int c)
{
- volatile u8 * uart = 0;
- int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
- return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
- uart = (volatile u8 *)(OMAP_UART2_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
- uart = (volatile u8 *)(OMAP_UART1_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
- return;
-#else
- return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
- /* Determine which serial port to use */
- do {
- /* MMU is not on, so cpu_is_omapXXXX() won't work here */
- unsigned int omap_id = omap_get_id();
-
- if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
- shift = 0;
-
- if (check_port(uart, shift))
- break;
- /* Silent boot if no serial ports are enabled. */
+ if (!uart_base)
return;
- } while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
- /*
- * Now, xmit each character
- */
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
barrier();
- uart[UART_TX << shift] = c;
+ uart_base[UART_TX << uart_shift] = c;
}
static inline void flush(void)
@@ -82,7 +58,116 @@
}
/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \
+ dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart1_base = (volatile u8 *)(uart1_phys); \
+ uart1_shift = (uart1_shft); \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_uart1_scratchpad(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \
+ OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
+ OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \
+ OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \
+ OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
+ ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap2evm);
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ } while (0);
+}
+
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+
+/*
* nothing to do
*/
-#define arch_decomp_setup()
#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 33a500e..288e29e 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,6 +3,7 @@
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
+#include <linux/usb/musb.h>
#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
@@ -42,7 +43,15 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-extern void usb_musb_init(void);
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u8 power;
+};
+
+enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 0cfd54f..b0078cf 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -90,8 +90,6 @@
return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
- return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
@@ -110,8 +108,6 @@
return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
- if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
- return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
@@ -128,7 +124,7 @@
return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
}
#endif
- return __arm_ioremap(p, size, type);
+ return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
}
EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 463d638..905ed83 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -1,7 +1,7 @@
/*
* omap iommu: tlb and pagetable primitives
*
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
* Paul Mundt and Toshihiro Kobayashi
@@ -646,7 +646,7 @@
if (*iopte & IOPTE_LARGE) {
nent *= 16;
/* rewind to the 1st entry */
- iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+ iopte = iopte_offset(iopgd, (da & IOLARGE_MASK));
}
bytes *= nent;
memset(iopte, 0, nent * sizeof(*iopte));
@@ -667,7 +667,7 @@
if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
nent *= 16;
/* rewind to the 1st entry */
- iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+ iopgd = iopgd_offset(obj, (da & IOSUPER_MASK));
}
bytes *= nent;
}
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
index 37dac43..ab23b6a 100644
--- a/arch/arm/plat-omap/iopgtable.h
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -1,7 +1,7 @@
/*
* omap iommu: pagetable definitions
*
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
@@ -13,26 +13,52 @@
#ifndef __PLAT_OMAP_IOMMU_H
#define __PLAT_OMAP_IOMMU_H
+/*
+ * "L2 table" address mask and size definitions.
+ */
#define IOPGD_SHIFT 20
-#define IOPGD_SIZE (1 << IOPGD_SHIFT)
+#define IOPGD_SIZE (1UL << IOPGD_SHIFT)
#define IOPGD_MASK (~(IOPGD_SIZE - 1))
-#define IOSECTION_MASK IOPGD_MASK
-#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT))
-#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
-#define IOSUPER_SIZE (IOPGD_SIZE << 4)
+/*
+ * "section" address mask and size definitions.
+ */
+#define IOSECTION_SHIFT 20
+#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT)
+#define IOSECTION_MASK (~(IOSECTION_SIZE - 1))
+
+/*
+ * "supersection" address mask and size definitions.
+ */
+#define IOSUPER_SHIFT 24
+#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT)
#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
-#define IOPTE_SHIFT 12
-#define IOPTE_SIZE (1 << IOPTE_SHIFT)
-#define IOPTE_MASK (~(IOPTE_SIZE - 1))
-#define IOPAGE_MASK IOPTE_MASK
-#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT))
-#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
-#define IOLARGE_SIZE (IOPTE_SIZE << 4)
+/*
+ * "small page" address mask and size definitions.
+ */
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1UL << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+
+/*
+ * "large page" address mask and size definitions.
+ */
+#define IOLARGE_SHIFT 16
+#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT)
#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOPAGE_MASK IOPTE_MASK
+
+/*
+ * some descriptor attributes.
+ */
#define IOPGD_TABLE (1 << 0)
#define IOPGD_SECTION (2 << 0)
#define IOPGD_SUPER (1 << 18 | 2 << 0)
@@ -40,12 +66,14 @@
#define IOPTE_SMALL (2 << 0)
#define IOPTE_LARGE (1 << 0)
+/* to find an entry in a page-table-directory */
#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+/* to find an entry in the second-level page table. */
#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da))
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 8e90633..4229cec 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -28,6 +28,7 @@
#include <plat/mailbox.h>
+static struct workqueue_struct *mboxd;
static struct omap_mbox *mboxes;
static DEFINE_RWLOCK(mboxes_lock);
@@ -188,7 +189,7 @@
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
- schedule_work(&mbox->rxq->work);
+ queue_work(mboxd, &mbox->rxq->work);
}
static irqreturn_t mbox_interrupt(int irq, void *p)
@@ -401,12 +402,17 @@
static int __init omap_mbox_init(void)
{
+ mboxd = create_workqueue("mboxd");
+ if (!mboxd)
+ return -ENOMEM;
+
return 0;
}
module_init(omap_mbox_init);
static void __exit omap_mbox_exit(void)
{
+ destroy_workqueue(mboxd);
}
module_exit(omap_mbox_exit);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f757672..e47686e 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,64 +27,97 @@
#include <plat/dma.h>
#include <plat/mcbsp.h>
+#include "../mach-omap2/cm-regbits-34xx.h"
+
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count;
+int omap_mcbsp_count, omap_mcbsp_cache_size;
-void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val)
+void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1() || cpu_is_omap2420())
- __raw_writew((u16)val, io_base + reg);
- else
- __raw_writel(val, io_base + reg);
+ if (cpu_class_is_omap1()) {
+ ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
+ __raw_writew((u16)val, mcbsp->io_base + reg);
+ } else if (cpu_is_omap2420()) {
+ ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
+ __raw_writew((u16)val, mcbsp->io_base + reg);
+ } else {
+ ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
+ __raw_writel(val, mcbsp->io_base + reg);
+ }
}
-int omap_mcbsp_read(void __iomem *io_base, u16 reg)
+int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1() || cpu_is_omap2420())
- return __raw_readw(io_base + reg);
- else
- return __raw_readl(io_base + reg);
+ if (cpu_class_is_omap1()) {
+ return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+ ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
+ } else if (cpu_is_omap2420()) {
+ return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+ ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ } else {
+ return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
+ ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ }
}
-#define OMAP_MCBSP_READ(base, reg) \
- omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val) \
- omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
+#ifdef CONFIG_ARCH_OMAP3
+void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
+{
+ __raw_writel(val, mcbsp->st_data->io_base_st + reg);
+}
+
+int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
+{
+ return __raw_readl(mcbsp->st_data->io_base_st + reg);
+}
+#endif
+
+#define MCBSP_READ(mcbsp, reg) \
+ omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
+#define MCBSP_WRITE(mcbsp, reg, val) \
+ omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val)
+#define MCBSP_READ_CACHE(mcbsp, reg) \
+ omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+#define MCBSP_ST_READ(mcbsp, reg) \
+ omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
+#define MCBSP_ST_WRITE(mcbsp, reg, val) \
+ omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val)
+
static void omap_mcbsp_dump_reg(u8 id)
{
struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, DRR2));
+ MCBSP_READ(mcbsp, DRR2));
dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, DRR1));
+ MCBSP_READ(mcbsp, DRR1));
dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, DXR2));
+ MCBSP_READ(mcbsp, DXR2));
dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, DXR1));
+ MCBSP_READ(mcbsp, DXR1));
dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, SPCR2));
+ MCBSP_READ(mcbsp, SPCR2));
dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, SPCR1));
+ MCBSP_READ(mcbsp, SPCR1));
dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, RCR2));
+ MCBSP_READ(mcbsp, RCR2));
dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, RCR1));
+ MCBSP_READ(mcbsp, RCR1));
dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, XCR2));
+ MCBSP_READ(mcbsp, XCR2));
dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, XCR1));
+ MCBSP_READ(mcbsp, XCR1));
dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, SRGR2));
+ MCBSP_READ(mcbsp, SRGR2));
dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, SRGR1));
+ MCBSP_READ(mcbsp, SRGR1));
dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n",
- OMAP_MCBSP_READ(mcbsp->io_base, PCR0));
+ MCBSP_READ(mcbsp, PCR0));
dev_dbg(mcbsp->dev, "***********************\n");
}
@@ -93,15 +126,15 @@
struct omap_mcbsp *mcbsp_tx = dev_id;
u16 irqst_spcr2;
- irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+ irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2);
dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
if (irqst_spcr2 & XSYNC_ERR) {
dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
irqst_spcr2);
/* Writing zero to XSYNC_ERR clears the IRQ */
- OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
- irqst_spcr2 & ~(XSYNC_ERR));
+ MCBSP_WRITE(mcbsp_tx, SPCR2,
+ MCBSP_READ_CACHE(mcbsp_tx, SPCR2) & ~(XSYNC_ERR));
} else {
complete(&mcbsp_tx->tx_irq_completion);
}
@@ -114,15 +147,15 @@
struct omap_mcbsp *mcbsp_rx = dev_id;
u16 irqst_spcr1;
- irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+ irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1);
dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
if (irqst_spcr1 & RSYNC_ERR) {
dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
irqst_spcr1);
/* Writing zero to RSYNC_ERR clears the IRQ */
- OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
- irqst_spcr1 & ~(RSYNC_ERR));
+ MCBSP_WRITE(mcbsp_rx, SPCR1,
+ MCBSP_READ_CACHE(mcbsp_rx, SPCR1) & ~(RSYNC_ERR));
} else {
complete(&mcbsp_rx->tx_irq_completion);
}
@@ -135,7 +168,7 @@
struct omap_mcbsp *mcbsp_dma_tx = data;
dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+ MCBSP_READ(mcbsp_dma_tx, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -149,7 +182,7 @@
struct omap_mcbsp *mcbsp_dma_rx = data;
dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+ MCBSP_READ(mcbsp_dma_rx, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
@@ -167,7 +200,6 @@
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -175,30 +207,280 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n",
mcbsp->id, mcbsp->phys_base);
/* We write the given config */
- OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
- OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1);
- OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2);
- OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1);
- OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2);
- OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
- OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
- OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
- OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
- OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
- OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+ MCBSP_WRITE(mcbsp, SPCR2, config->spcr2);
+ MCBSP_WRITE(mcbsp, SPCR1, config->spcr1);
+ MCBSP_WRITE(mcbsp, RCR2, config->rcr2);
+ MCBSP_WRITE(mcbsp, RCR1, config->rcr1);
+ MCBSP_WRITE(mcbsp, XCR2, config->xcr2);
+ MCBSP_WRITE(mcbsp, XCR1, config->xcr1);
+ MCBSP_WRITE(mcbsp, SRGR2, config->srgr2);
+ MCBSP_WRITE(mcbsp, SRGR1, config->srgr1);
+ MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
+ MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
+ MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
- OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
- OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+ MCBSP_WRITE(mcbsp, XCCR, config->xccr);
+ MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
}
EXPORT_SYMBOL(omap_mcbsp_config);
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+static void omap_st_on(struct omap_mcbsp *mcbsp)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ w &= ~(1 << (mcbsp->id - 2));
+ cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ /* Enable McBSP Sidetone */
+ w = MCBSP_READ(mcbsp, SSELCR);
+ MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN);
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+ /* Enable Sidetone from Sidetone Core */
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+ MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN);
+}
+
+static void omap_st_off(struct omap_mcbsp *mcbsp)
+{
+ unsigned int w;
+
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+ MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
+
+ w = MCBSP_READ(mcbsp, SSELCR);
+ MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
+
+ w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ w |= 1 << (mcbsp->id - 2);
+ cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+}
+
+static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
+{
+ u16 val, i;
+
+ val = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, val & ~(ST_AUTOIDLE));
+
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ if (val & ST_COEFFWREN)
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN);
+
+ for (i = 0; i < 128; i++)
+ MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]);
+
+ i = 0;
+
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+ while (!(val & ST_COEFFWRDONE) && (++i < 1000))
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+ if (i == 1000)
+ dev_err(mcbsp->dev, "McBSP FIR load error!\n");
+}
+
+static void omap_st_chgain(struct omap_mcbsp *mcbsp)
+{
+ u16 w;
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \
+ ST_CH1GAIN(st_data->ch1gain));
+}
+
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENOENT;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (channel == 0)
+ st_data->ch0gain = chgain;
+ else if (channel == 1)
+ st_data->ch1gain = chgain;
+ else
+ ret = -EINVAL;
+
+ if (st_data->enabled)
+ omap_st_chgain(mcbsp);
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_set_chgain);
+
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENOENT;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (channel == 0)
+ *chgain = st_data->ch0gain;
+ else if (channel == 1)
+ *chgain = st_data->ch1gain;
+ else
+ ret = -EINVAL;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_get_chgain);
+
+static int omap_st_start(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data && st_data->enabled && !st_data->running) {
+ omap_st_fir_write(mcbsp, st_data->taps);
+ omap_st_chgain(mcbsp);
+
+ if (!mcbsp->free) {
+ omap_st_on(mcbsp);
+ st_data->running = 1;
+ }
+ }
+
+ return 0;
+}
+
+int omap_st_enable(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+ spin_lock_irq(&mcbsp->lock);
+ st_data->enabled = 1;
+ omap_st_start(mcbsp);
+ spin_unlock_irq(&mcbsp->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_st_enable);
+
+static int omap_st_stop(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data && st_data->running) {
+ if (!mcbsp->free) {
+ omap_st_off(mcbsp);
+ st_data->running = 0;
+ }
+ }
+
+ return 0;
+}
+
+int omap_st_disable(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+ spin_lock_irq(&mcbsp->lock);
+ omap_st_stop(mcbsp);
+ st_data->enabled = 0;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_disable);
+
+int omap_st_is_enabled(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+
+ return st_data->enabled;
+}
+EXPORT_SYMBOL(omap_st_is_enabled);
+
/*
* omap_mcbsp_set_tx_threshold configures how to deal
* with transmit threshold. the threshold value and handler can be
@@ -207,7 +489,6 @@
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
if (!cpu_is_omap34xx())
return;
@@ -217,9 +498,8 @@
return;
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
- OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+ MCBSP_WRITE(mcbsp, THRSH2, threshold);
}
EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
@@ -231,7 +511,6 @@
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
if (!cpu_is_omap34xx())
return;
@@ -241,9 +520,8 @@
return;
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
- OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+ MCBSP_WRITE(mcbsp, THRSH1, threshold);
}
EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
@@ -313,19 +591,18 @@
if (cpu_is_omap34xx()) {
u16 syscon;
- syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon = MCBSP_READ(mcbsp, SYSCON);
syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
CLOCKACTIVITY(0x02));
- OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
- XRDYEN | RRDYEN);
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
} else {
syscon |= SIDLEMODE(0x01);
}
- OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+ MCBSP_WRITE(mcbsp, SYSCON, syscon);
}
}
@@ -337,7 +614,7 @@
if (cpu_is_omap34xx()) {
u16 syscon;
- syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon = MCBSP_READ(mcbsp, SYSCON);
syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
/*
* HW bug workaround - If no_idle mode is taken, we need to
@@ -345,17 +622,19 @@
* device will not hit retention anymore.
*/
syscon |= SIDLEMODE(0x02);
- OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+ MCBSP_WRITE(mcbsp, SYSCON, syscon);
syscon &= ~(SIDLEMODE(0x03));
- OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+ MCBSP_WRITE(mcbsp, SYSCON, syscon);
- OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
}
}
#else
static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
#endif
/*
@@ -392,6 +671,7 @@
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
+ void *reg_cache;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -400,15 +680,21 @@
}
mcbsp = id_to_mcbsp_ptr(id);
+ reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ if (!reg_cache) {
+ return -ENOMEM;
+ }
+
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
mcbsp->id);
- spin_unlock(&mcbsp->lock);
- return -EBUSY;
+ err = -EBUSY;
+ goto err_kfree;
}
mcbsp->free = 0;
+ mcbsp->reg_cache = reg_cache;
spin_unlock(&mcbsp->lock);
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
@@ -424,8 +710,8 @@
* Make sure that transmitter, receiver and sample-rate generator are
* not running before activating IRQs.
*/
- OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
- OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
+ MCBSP_WRITE(mcbsp, SPCR1, 0);
+ MCBSP_WRITE(mcbsp, SPCR2, 0);
if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
/* We need to get IRQs here */
@@ -436,7 +722,7 @@
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
"for McBSP%d\n", mcbsp->tx_irq,
mcbsp->id);
- goto error;
+ goto err_clk_disable;
}
init_completion(&mcbsp->rx_irq_completion);
@@ -446,16 +732,16 @@
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
"for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- goto tx_irq;
+ goto err_free_irq;
}
}
return 0;
-tx_irq:
+err_free_irq:
free_irq(mcbsp->tx_irq, (void *)mcbsp);
-error:
+err_clk_disable:
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
- mcbsp->pdata->ops->free(id);
+ mcbsp->pdata->ops->free(id);
/* Do procedure specific to omap34xx arch, if applicable */
omap34xx_mcbsp_free(mcbsp);
@@ -463,7 +749,12 @@
clk_disable(mcbsp->fclk);
clk_disable(mcbsp->iclk);
+ spin_lock(&mcbsp->lock);
mcbsp->free = 1;
+ mcbsp->reg_cache = NULL;
+err_kfree:
+ spin_unlock(&mcbsp->lock);
+ kfree(reg_cache);
return err;
}
@@ -472,6 +763,7 @@
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
+ void *reg_cache;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -494,16 +786,18 @@
free_irq(mcbsp->tx_irq, (void *)mcbsp);
}
- spin_lock(&mcbsp->lock);
- if (mcbsp->free) {
- dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
- mcbsp->id);
- spin_unlock(&mcbsp->lock);
- return;
- }
+ reg_cache = mcbsp->reg_cache;
- mcbsp->free = 1;
+ spin_lock(&mcbsp->lock);
+ if (mcbsp->free)
+ dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
+ else
+ mcbsp->free = 1;
+ mcbsp->reg_cache = NULL;
spin_unlock(&mcbsp->lock);
+
+ if (reg_cache)
+ kfree(reg_cache);
}
EXPORT_SYMBOL(omap_mcbsp_free);
@@ -515,7 +809,6 @@
void omap_mcbsp_start(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
int idle;
u16 w;
@@ -524,28 +817,30 @@
return;
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
- mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
- mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
+ if (cpu_is_omap34xx())
+ omap_st_start(mcbsp);
- idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
- OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+ mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
+ mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
+
+ idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+ MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
if (idle) {
/* Start the sample generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+ w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
}
/* Enable transmitter and receiver */
tx &= 1;
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
+ w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2, w | tx);
rx &= 1;
- w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
+ w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+ MCBSP_WRITE(mcbsp, SPCR1, w | rx);
/*
* Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
@@ -557,18 +852,18 @@
if (idle) {
/* Start frame sync */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+ w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
/* Release the transmitter and receiver */
- w = OMAP_MCBSP_READ(io_base, XCCR);
+ w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
- OMAP_MCBSP_WRITE(io_base, XCCR, w);
- w = OMAP_MCBSP_READ(io_base, RCCR);
+ MCBSP_WRITE(mcbsp, XCCR, w);
+ w = MCBSP_READ_CACHE(mcbsp, RCCR);
w &= ~(rx ? RDISABLE : 0);
- OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ MCBSP_WRITE(mcbsp, RCCR, w);
}
/* Dump McBSP Regs */
@@ -579,7 +874,6 @@
void omap_mcbsp_stop(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
int idle;
u16 w;
@@ -589,36 +883,38 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
/* Reset transmitter */
tx &= 1;
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
- w = OMAP_MCBSP_READ(io_base, XCCR);
+ w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
- OMAP_MCBSP_WRITE(io_base, XCCR, w);
+ MCBSP_WRITE(mcbsp, XCCR, w);
}
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
+ w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
/* Reset receiver */
rx &= 1;
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
- w = OMAP_MCBSP_READ(io_base, RCCR);
+ w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
- OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ MCBSP_WRITE(mcbsp, RCCR, w);
}
- w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
+ w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+ MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
- idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
- OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+ idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+ MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
if (idle) {
/* Reset the sample rate generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+ w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
+
+ if (cpu_is_omap34xx())
+ omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
@@ -626,7 +922,6 @@
int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
{
struct omap_mcbsp *mcbsp;
- void __iomem *base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -634,28 +929,27 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- base = mcbsp->io_base;
- writew(buf, base + OMAP_MCBSP_REG_DXR1);
+ MCBSP_WRITE(mcbsp, DXR1, buf);
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+ if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for transmit confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+ while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
- (~XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) &
+ (~XRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
- (XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) |
+ (XRST));
udelay(10);
dev_err(mcbsp->dev, "Could not write to"
" McBSP%d Register\n", mcbsp->id);
@@ -671,7 +965,6 @@
int omap_mcbsp_pollread(unsigned int id, u16 *buf)
{
struct omap_mcbsp *mcbsp;
- void __iomem *base;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -679,26 +972,25 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- base = mcbsp->io_base;
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+ if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR1);
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for recieve confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+ while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
- (~RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) &
+ (~RRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
- (RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) |
+ (RRST));
udelay(10);
dev_err(mcbsp->dev, "Could not read from"
" McBSP%d Register\n", mcbsp->id);
@@ -706,7 +998,7 @@
}
}
}
- *buf = readw(base + OMAP_MCBSP_REG_DRR1);
+ *buf = MCBSP_READ(mcbsp, DRR1);
return 0;
}
@@ -718,7 +1010,6 @@
void omap_mcbsp_xmit_word(unsigned int id, u32 word)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
omap_mcbsp_word_length word_length;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -727,21 +1018,19 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
word_length = mcbsp->tx_word_length;
wait_for_completion(&mcbsp->tx_irq_completion);
if (word_length > OMAP_MCBSP_WORD_16)
- OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
- OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+ MCBSP_WRITE(mcbsp, DXR2, word >> 16);
+ MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
}
EXPORT_SYMBOL(omap_mcbsp_xmit_word);
u32 omap_mcbsp_recv_word(unsigned int id)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
u16 word_lsb, word_msb = 0;
omap_mcbsp_word_length word_length;
@@ -752,13 +1041,12 @@
mcbsp = id_to_mcbsp_ptr(id);
word_length = mcbsp->rx_word_length;
- io_base = mcbsp->io_base;
wait_for_completion(&mcbsp->rx_irq_completion);
if (word_length > OMAP_MCBSP_WORD_16)
- word_msb = OMAP_MCBSP_READ(io_base, DRR2);
- word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+ word_msb = MCBSP_READ(mcbsp, DRR2);
+ word_lsb = MCBSP_READ(mcbsp, DRR1);
return (word_lsb | (word_msb << 16));
}
@@ -767,7 +1055,6 @@
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
{
struct omap_mcbsp *mcbsp;
- void __iomem *io_base;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -777,7 +1064,6 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
tx_word_length = mcbsp->tx_word_length;
rx_word_length = mcbsp->rx_word_length;
@@ -785,14 +1071,16 @@
return -EINVAL;
/* First we wait for the transmitter to be ready */
- spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+ spcr2 = MCBSP_READ(mcbsp, SPCR2);
while (!(spcr2 & XRDY)) {
- spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+ spcr2 = MCBSP_READ(mcbsp, SPCR2);
if (attempts++ > 1000) {
/* We must reset the transmitter */
- OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
udelay(10);
- OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d transmitter not "
"ready\n", mcbsp->id);
@@ -802,18 +1090,20 @@
/* Now we can push the data */
if (tx_word_length > OMAP_MCBSP_WORD_16)
- OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
- OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+ MCBSP_WRITE(mcbsp, DXR2, word >> 16);
+ MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
/* We wait for the receiver to be ready */
- spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+ spcr1 = MCBSP_READ(mcbsp, SPCR1);
while (!(spcr1 & RRDY)) {
- spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+ spcr1 = MCBSP_READ(mcbsp, SPCR1);
if (attempts++ > 1000) {
/* We must reset the receiver */
- OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
udelay(10);
- OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d receiver not "
"ready\n", mcbsp->id);
@@ -823,8 +1113,8 @@
/* Receiver is ready, let's read the dummy data */
if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = OMAP_MCBSP_READ(io_base, DRR2);
- word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+ word_msb = MCBSP_READ(mcbsp, DRR2);
+ word_lsb = MCBSP_READ(mcbsp, DRR1);
return 0;
}
@@ -834,7 +1124,6 @@
{
struct omap_mcbsp *mcbsp;
u32 clock_word = 0;
- void __iomem *io_base;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -845,7 +1134,6 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- io_base = mcbsp->io_base;
tx_word_length = mcbsp->tx_word_length;
rx_word_length = mcbsp->rx_word_length;
@@ -854,14 +1142,16 @@
return -EINVAL;
/* First we wait for the transmitter to be ready */
- spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+ spcr2 = MCBSP_READ(mcbsp, SPCR2);
while (!(spcr2 & XRDY)) {
- spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+ spcr2 = MCBSP_READ(mcbsp, SPCR2);
if (attempts++ > 1000) {
/* We must reset the transmitter */
- OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
udelay(10);
- OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+ MCBSP_WRITE(mcbsp, SPCR2,
+ MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d transmitter not "
"ready\n", mcbsp->id);
@@ -871,18 +1161,20 @@
/* We first need to enable the bus clock */
if (tx_word_length > OMAP_MCBSP_WORD_16)
- OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16);
- OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff);
+ MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16);
+ MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff);
/* We wait for the receiver to be ready */
- spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+ spcr1 = MCBSP_READ(mcbsp, SPCR1);
while (!(spcr1 & RRDY)) {
- spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+ spcr1 = MCBSP_READ(mcbsp, SPCR1);
if (attempts++ > 1000) {
/* We must reset the receiver */
- OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
udelay(10);
- OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+ MCBSP_WRITE(mcbsp, SPCR1,
+ MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d receiver not "
"ready\n", mcbsp->id);
@@ -892,8 +1184,8 @@
/* Receiver is ready, there is something for us */
if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = OMAP_MCBSP_READ(io_base, DRR2);
- word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+ word_msb = MCBSP_READ(mcbsp, DRR2);
+ word_lsb = MCBSP_READ(mcbsp, DRR1);
word[0] = (word_lsb | (word_msb << 16));
@@ -1107,7 +1399,7 @@
}
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1198,6 +1490,64 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static ssize_t st_taps_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+ ssize_t status = 0;
+ int i;
+
+ spin_lock_irq(&mcbsp->lock);
+ for (i = 0; i < st_data->nr_taps; i++)
+ status += sprintf(&buf[status], (i ? ", %d" : "%d"),
+ st_data->taps[i]);
+ if (i)
+ status += sprintf(&buf[status], "\n");
+ spin_unlock_irq(&mcbsp->lock);
+
+ return status;
+}
+
+static ssize_t st_taps_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+ int val, tmp, status, i = 0;
+
+ spin_lock_irq(&mcbsp->lock);
+ memset(st_data->taps, 0, sizeof(st_data->taps));
+ st_data->nr_taps = 0;
+
+ do {
+ status = sscanf(buf, "%d%n", &val, &tmp);
+ if (status < 0 || status == 0) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (val < -32768 || val > 32767) {
+ size = -EINVAL;
+ goto out;
+ }
+ st_data->taps[i++] = val;
+ buf += tmp;
+ if (*buf != ',')
+ break;
+ buf++;
+ } while (1);
+
+ st_data->nr_taps = i;
+
+out:
+ spin_unlock_irq(&mcbsp->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
+
static const struct attribute *additional_attrs[] = {
&dev_attr_max_tx_thres.attr,
&dev_attr_max_rx_thres.attr,
@@ -1219,6 +1569,60 @@
sysfs_remove_group(&dev->kobj, &additional_attr_group);
}
+static const struct attribute *sidetone_attrs[] = {
+ &dev_attr_st_taps.attr,
+ NULL,
+};
+
+static const struct attribute_group sidetone_attr_group = {
+ .attrs = (struct attribute **)sidetone_attrs,
+};
+
+int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_platform_data *pdata = mcbsp->pdata;
+ struct omap_mcbsp_st_data *st_data;
+ int err;
+
+ st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL);
+ if (!st_data) {
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ st_data->io_base_st = ioremap(pdata->phys_base_st, SZ_4K);
+ if (!st_data->io_base_st) {
+ err = -ENOMEM;
+ goto err2;
+ }
+
+ err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ if (err)
+ goto err3;
+
+ mcbsp->st_data = st_data;
+ return 0;
+
+err3:
+ iounmap(st_data->io_base_st);
+err2:
+ kfree(st_data);
+err1:
+ return err;
+
+}
+
+static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data) {
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
+ }
+}
+
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
{
mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
@@ -1232,6 +1636,12 @@
if (omap_additional_add(mcbsp->dev))
dev_warn(mcbsp->dev,
"Unable to create additional controls\n");
+
+ if (mcbsp->id == 2 || mcbsp->id == 3)
+ if (omap_st_add(mcbsp))
+ dev_warn(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+
} else {
mcbsp->max_tx_thres = -EINVAL;
mcbsp->max_rx_thres = -EINVAL;
@@ -1240,13 +1650,17 @@
static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
{
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx()) {
omap_additional_remove(mcbsp->dev);
+
+ if (mcbsp->id == 2 || mcbsp->id == 3)
+ omap_st_remove(mcbsp);
+ }
}
#else
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2ed7201..5904358 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -90,6 +90,8 @@
#define IGNORE_WAKEUP_LAT 1
+#define OMAP_DEVICE_MAGIC 0xf00dcafe
+
/* Private functions */
/**
@@ -138,10 +140,22 @@
"%llu nsec\n", od->pdev.name, od->pm_lat_level,
act_lat);
- WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
- "activate step %d took longer than expected (%llu > %d)\n",
- od->pdev.name, od->pdev.id, od->pm_lat_level,
- act_lat, odpl->activate_lat);
+ if (act_lat > odpl->activate_lat) {
+ odpl->activate_lat_worst = act_lat;
+ if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+ odpl->activate_lat = act_lat;
+ pr_warning("omap_device: %s.%d: new worst case "
+ "activate latency %d: %llu\n",
+ od->pdev.name, od->pdev.id,
+ od->pm_lat_level, act_lat);
+ } else
+ pr_warning("omap_device: %s.%d: activate "
+ "latency %d higher than exptected. "
+ "(%llu > %d)\n",
+ od->pdev.name, od->pdev.id,
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
+ }
od->dev_wakeup_lat -= odpl->activate_lat;
}
@@ -194,10 +208,23 @@
"%llu nsec\n", od->pdev.name, od->pm_lat_level,
deact_lat);
- WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
- "deactivate step %d took longer than expected "
- "(%llu > %d)\n", od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat, odpl->deactivate_lat);
+ if (deact_lat > odpl->deactivate_lat) {
+ odpl->deactivate_lat_worst = deact_lat;
+ if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+ odpl->deactivate_lat = deact_lat;
+ pr_warning("omap_device: %s.%d: new worst case "
+ "deactivate latency %d: %llu\n",
+ od->pdev.name, od->pdev.id,
+ od->pm_lat_level, deact_lat);
+ } else
+ pr_warning("omap_device: %s.%d: deactivate "
+ "latency %d higher than exptected. "
+ "(%llu > %d)\n",
+ od->pdev.name, od->pdev.id,
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
+ }
+
od->dev_wakeup_lat += odpl->activate_lat;
@@ -280,6 +307,7 @@
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
*
* Convenience function for building and registering a single
* omap_device record, which in turn builds and registers a
@@ -291,7 +319,7 @@
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt)
+ int pm_lats_cnt, int is_early_device)
{
struct omap_hwmod *ohs[] = { oh };
@@ -299,7 +327,8 @@
return ERR_PTR(-EINVAL);
return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
- pdata_len, pm_lats, pm_lats_cnt);
+ pdata_len, pm_lats, pm_lats_cnt,
+ is_early_device);
}
/**
@@ -311,6 +340,7 @@
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
*
* Convenience function for building and registering an omap_device
* subsystem record. Subsystem records consist of multiple
@@ -322,7 +352,7 @@
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt)
+ int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
struct omap_device *od;
@@ -378,7 +408,13 @@
od->pm_lats = pm_lats;
od->pm_lats_cnt = pm_lats_cnt;
- ret = omap_device_register(od);
+ od->magic = OMAP_DEVICE_MAGIC;
+
+ if (is_early_device)
+ ret = omap_early_device_register(od);
+ else
+ ret = omap_device_register(od);
+
if (ret)
goto odbs_exit4;
@@ -399,6 +435,24 @@
}
/**
+ * omap_early_device_register - register an omap_device as an early platform
+ * device.
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure. This currently just calls
+ * platform_early_add_device() on the underlying platform_device.
+ * Returns 0 by default.
+ */
+int omap_early_device_register(struct omap_device *od)
+{
+ struct platform_device *devices[1];
+
+ devices[0] = &(od->pdev);
+ early_platform_add_devices(devices, 1);
+ return 0;
+}
+
+/**
* omap_device_register - register an omap_device with one omap_hwmod
* @od: struct omap_device * to register
*
@@ -437,8 +491,8 @@
od = _find_by_pdev(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
- "invalid state\n", od->pdev.name, od->pdev.id);
+ WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+ od->pdev.name, od->pdev.id, __func__, od->_state);
return -EINVAL;
}
@@ -476,8 +530,8 @@
od = _find_by_pdev(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
- "invalid state\n", od->pdev.name, od->pdev.id);
+ WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+ od->pdev.name, od->pdev.id, __func__, od->_state);
return -EINVAL;
}
@@ -509,8 +563,8 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
- "from invalid state\n", od->pdev.name, od->pdev.id);
+ WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+ od->pdev.name, od->pdev.id, __func__, od->_state);
return -EINVAL;
}
@@ -564,6 +618,18 @@
}
/**
+ * omap_device_is_valid - Check if pointer is a valid omap_device
+ * @od: struct omap_device *
+ *
+ * Return whether struct omap_device pointer @od points to a valid
+ * omap_device.
+ */
+bool omap_device_is_valid(struct omap_device *od)
+{
+ return (od && od->magic == OMAP_DEVICE_MAGIC);
+}
+
+/**
* omap_device_get_pwrdm - return the powerdomain * associated with @od
* @od: struct omap_device *
*
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index d8d5094..51f4dfb 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -53,7 +53,7 @@
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h
index bfd2ca6..299d95f 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/plat-s3c/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xE0000000)
+#define VMALLOC_END (0xe0000000UL)
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
index 5d2f19a..e593a2a 100644
--- a/arch/arm/plat-stmp3xxx/clock.c
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -1126,9 +1126,8 @@
if (ops && ops->set_parent)
ops->set_parent(cl->clk, cl->clk->parent);
}
-
- clkdev_add(cl);
}
+ clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
return 0;
}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index fb3b969..1b9348b 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
- .macro addruart,rx
+ .macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
index 541b880..943c1a2 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -9,4 +9,4 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-#define VMALLOC_END (0xF0000000)
+#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index a63c4be..7f3f59f 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -433,7 +433,11 @@
* saved one. This function is used by the ptrace mechanism.
*/
#ifdef CONFIG_SMP
-void vfp_sync_state(struct thread_info *thread)
+void vfp_sync_hwstate(struct thread_info *thread)
+{
+}
+
+void vfp_flush_hwstate(struct thread_info *thread)
{
/*
* On SMP systems, the VFP state is automatically saved at every
@@ -444,35 +448,48 @@
thread->vfpstate.hard.cpu = NR_CPUS;
}
#else
-void vfp_sync_state(struct thread_info *thread)
+void vfp_sync_hwstate(struct thread_info *thread)
{
unsigned int cpu = get_cpu();
- u32 fpexc = fmrx(FPEXC);
/*
- * If VFP is enabled, the previous state was already saved and
- * last_VFP_context updated.
+ * If the thread we're interested in is the current owner of the
+ * hardware VFP state, then we need to save its state.
*/
- if (fpexc & FPEXC_EN)
- goto out;
+ if (last_VFP_context[cpu] == &thread->vfpstate) {
+ u32 fpexc = fmrx(FPEXC);
- if (!last_VFP_context[cpu])
- goto out;
+ /*
+ * Save the last VFP state on this CPU.
+ */
+ fmxr(FPEXC, fpexc | FPEXC_EN);
+ vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
+ fmxr(FPEXC, fpexc);
+ }
+
+ put_cpu();
+}
+
+void vfp_flush_hwstate(struct thread_info *thread)
+{
+ unsigned int cpu = get_cpu();
/*
- * Save the last VFP state on this CPU.
+ * If the thread we're interested in is the current owner of the
+ * hardware VFP state, then we need to save its state.
*/
- fmxr(FPEXC, fpexc | FPEXC_EN);
- vfp_save_state(last_VFP_context[cpu], fpexc);
- fmxr(FPEXC, fpexc);
+ if (last_VFP_context[cpu] == &thread->vfpstate) {
+ u32 fpexc = fmrx(FPEXC);
- /*
- * Set the context to NULL to force a reload the next time the thread
- * uses the VFP.
- */
- last_VFP_context[cpu] = NULL;
+ fmxr(FPEXC, fpexc & ~FPEXC_EN);
-out:
+ /*
+ * Set the context to NULL to force a reload the next time
+ * the thread uses the VFP.
+ */
+ last_VFP_context[cpu] = NULL;
+ }
+
put_cpu();
}
#endif
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda1..a9ae30c 100644
--- a/arch/avr32/include/asm/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
@@ -325,7 +325,7 @@
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* Encode and decode a swap entry
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index 06677be..0da2310 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -101,7 +101,7 @@
}
void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
unsigned long flags;
@@ -110,7 +110,7 @@
return;
local_irq_save(flags);
- update_dtlb(address, pte);
+ update_dtlb(address, *ptep);
local_irq_restore(flags);
}
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 5d75f77..1a61efc 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -133,7 +133,7 @@
}
static struct irq_chip crisv10_irq_type = {
- .typename = "CRISv10",
+ .name = "CRISv10",
.startup = startup_crisv10_irq,
.shutdown = shutdown_crisv10_irq,
.enable = enable_crisv10_irq,
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 57668db..b624119 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -336,7 +336,7 @@
}
static struct irq_chip crisv32_irq_type = {
- .typename = "CRISv32",
+ .name = "CRISv32",
.startup = startup_crisv32_irq,
.shutdown = shutdown_crisv32_irq,
.enable = enable_crisv32_irq,
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
index 6eb54ea..f6f3637 100644
--- a/arch/cris/arch-v32/kernel/pinmux.c
+++ b/arch/cris/arch-v32/kernel/pinmux.c
@@ -54,7 +54,7 @@
crisv32_pinmux_init();
- if (port > PORTS)
+ if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
@@ -197,7 +197,7 @@
crisv32_pinmux_init();
- if (port > PORTS)
+ if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/arch-v32/mach-a3/pinmux.c b/arch/cris/arch-v32/mach-a3/pinmux.c
index 0a28c9b..18648ef 100644
--- a/arch/cris/arch-v32/mach-a3/pinmux.c
+++ b/arch/cris/arch-v32/mach-a3/pinmux.c
@@ -242,7 +242,7 @@
crisv32_pinmux_init();
- if (port > PORTS)
+ if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/arch-v32/mach-fs/pinmux.c b/arch/cris/arch-v32/mach-fs/pinmux.c
index d722ad9..38f29ee 100644
--- a/arch/cris/arch-v32/mach-fs/pinmux.c
+++ b/arch/cris/arch-v32/mach-fs/pinmux.c
@@ -54,7 +54,7 @@
crisv32_pinmux_init();
- if (port > PORTS)
+ if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
@@ -195,7 +195,7 @@
crisv32_pinmux_init();
- if (port > PORTS)
+ if (port > PORTS || port < 0)
return -EINVAL;
spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 1fcce00..99ea6cd 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -270,7 +270,7 @@
* Actually I am not sure on what this could be used for.
*/
static inline void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index b5ce072..6d7b9ed 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -63,7 +63,7 @@
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
#endif
- seq_printf(p, " %14s", irq_desc[i].chip->typename);
+ seq_printf(p, " %14s", irq_desc[i].chip->name);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 22c6069..c18b0d3 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -505,7 +505,7 @@
/*
* preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
*/
-static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
unsigned long ampr;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 2d7f56a..9a50d7d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -499,23 +499,6 @@
def_bool y
depends on PROC_KCORE
-config IA32_SUPPORT
- bool "Support for Linux/x86 binaries"
- help
- IA-64 processors can execute IA-32 (X86) instructions. By
- saying Y here, the kernel will include IA-32 system call
- emulation support which makes it possible to transparently
- run IA-32 Linux binaries on an IA-64 Linux system.
- If in doubt, say Y.
-
-config COMPAT
- bool
- depends on IA32_SUPPORT
- default y
-
-config COMPAT_FOR_U64_ALIGNMENT
- def_bool COMPAT
-
config IA64_MCA_RECOVERY
tristate "MCA recovery from errors other than TLB."
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 475e272..8ae0d26 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -46,7 +46,6 @@
libs-y += arch/ia64/lib/
core-y += arch/ia64/kernel/ arch/ia64/mm/
-core-$(CONFIG_IA32_SUPPORT) += arch/ia64/ia32/
core-$(CONFIG_IA64_DIG) += arch/ia64/dig/
core-$(CONFIG_IA64_DIG_VTD) += arch/ia64/dig/
core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index ace4109..312b120 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -131,8 +131,6 @@
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_VIRTUAL_MEM_MAP is not set
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 7564549..6a4cc50 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -205,8 +205,6 @@
CONFIG_HOLES_IN_ZONE=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index e86fbd3..2dc185b 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -139,8 +139,6 @@
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index 546a772..21a23cd 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -130,8 +130,6 @@
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_VIRTUAL_MEM_MAP is not set
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
# CONFIG_PERFMON is not set
CONFIG_IA64_PALINFO=m
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index c522edf..c5a5ea9 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -154,7 +154,6 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
-# CONFIG_IA32_SUPPORT is not set
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 0bb0714..c67eafc 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -200,8 +200,6 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
-# CONFIG_IA32_SUPPORT is not set
-# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 514f063..3cec65b 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -150,8 +150,6 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c
index 4abd2c79..2207848 100644
--- a/arch/ia64/hp/common/aml_nfw.c
+++ b/arch/ia64/hp/common/aml_nfw.c
@@ -77,7 +77,7 @@
c->arg[4], c->arg[5], c->arg[6], c->arg[7]);
}
-static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value)
+static void aml_nfw_read_arg(u8 *offset, u32 bit_width, u64 *value)
{
switch (bit_width) {
case 8:
@@ -95,7 +95,7 @@
}
}
-static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value)
+static void aml_nfw_write_arg(u8 *offset, u32 bit_width, u64 *value)
{
switch (bit_width) {
case 8:
@@ -114,7 +114,7 @@
}
static acpi_status aml_nfw_handler(u32 function, acpi_physical_address address,
- u32 bit_width, acpi_integer *value, void *handler_context,
+ u32 bit_width, u64 *value, void *handler_context,
void *region_context)
{
struct ia64_nfw_context *context = handler_context;
diff --git a/arch/ia64/ia32/Makefile b/arch/ia64/ia32/Makefile
deleted file mode 100644
index baad8c7..0000000
--- a/arch/ia64/ia32/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the ia32 kernel emulation subsystem.
-#
-
-obj-y := ia32_entry.o sys_ia32.o ia32_signal.o \
- ia32_support.o ia32_traps.o binfmt_elf32.o ia32_ldt.o
-obj-$(CONFIG_AUDIT) += audit.o
-
-# Don't let GCC uses f16-f31 so that save_ia32_fpstate_live() and
-# restore_ia32_fpstate_live() can be sure the live register contain user-level state.
-CFLAGS_ia32_signal.o += -mfixed-range=f16-f31
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
deleted file mode 100644
index 5c93ddd..0000000
--- a/arch/ia64/ia32/audit.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "../../x86/include/asm/unistd_32.h"
-
-unsigned ia32_dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-unsigned ia32_chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-unsigned ia32_write_class[] = {
-#include <asm-generic/audit_write.h>
-~0U
-};
-
-unsigned ia32_read_class[] = {
-#include <asm-generic/audit_read.h>
-~0U
-};
-
-unsigned ia32_signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
-int ia32_classify_syscall(unsigned syscall)
-{
- switch(syscall) {
- case __NR_open:
- return 2;
- case __NR_openat:
- return 3;
- case __NR_socketcall:
- return 4;
- case __NR_execve:
- return 5;
- default:
- return 1;
- }
-}
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
deleted file mode 100644
index c69552b..0000000
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * IA-32 ELF support.
- *
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2001 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00 A. Mallick initialize csd/ssd/tssd/cflg for ia32_load_state
- * 04/13/01 D. Mosberger dropped saving tssd in ar.k1---it's not needed
- * 09/14/01 D. Mosberger fixed memory management for gdt/tss page
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/security.h>
-
-#include <asm/param.h>
-#include <asm/signal.h>
-
-#include "ia32priv.h"
-#include "elfcore32.h"
-
-/* Override some function names */
-#undef start_thread
-#define start_thread ia32_start_thread
-#define elf_format elf32_format
-#define init_elf_binfmt init_elf32_binfmt
-#define exit_elf_binfmt exit_elf32_binfmt
-
-#undef CLOCKS_PER_SEC
-#define CLOCKS_PER_SEC IA32_CLOCKS_PER_SEC
-
-extern void ia64_elf32_init (struct pt_regs *regs);
-
-static void elf32_set_personality (void);
-
-static unsigned long __attribute ((unused))
-randomize_stack_top(unsigned long stack_top);
-
-#define setup_arg_pages(bprm,tos,exec) ia32_setup_arg_pages(bprm,exec)
-#define elf_map elf32_map
-
-#undef SET_PERSONALITY
-#define SET_PERSONALITY(ex) elf32_set_personality()
-
-#define elf_read_implies_exec(ex, have_pt_gnu_stack) (!(have_pt_gnu_stack))
-
-/* Ugly but avoids duplication */
-#include "../../../fs/binfmt_elf.c"
-
-extern struct page *ia32_shared_page[];
-extern unsigned long *ia32_gdt;
-extern struct page *ia32_gate_page;
-
-int
-ia32_install_shared_page (struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- vmf->page = ia32_shared_page[smp_processor_id()];
- get_page(vmf->page);
- return 0;
-}
-
-int
-ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf)
-{
- vmf->page = ia32_gate_page;
- get_page(vmf->page);
- return 0;
-}
-
-
-static const struct vm_operations_struct ia32_shared_page_vm_ops = {
- .fault = ia32_install_shared_page
-};
-
-static const struct vm_operations_struct ia32_gate_page_vm_ops = {
- .fault = ia32_install_gate_page
-};
-
-void
-ia64_elf32_init (struct pt_regs *regs)
-{
- struct vm_area_struct *vma;
-
- /*
- * Map GDT below 4GB, where the processor can find it. We need to map
- * it with privilege level 3 because the IVE uses non-privileged accesses to these
- * tables. IA-32 segmentation is used to protect against IA-32 accesses to them.
- */
- vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
- if (vma) {
- vma->vm_mm = current->mm;
- vma->vm_start = IA32_GDT_OFFSET;
- vma->vm_end = vma->vm_start + PAGE_SIZE;
- vma->vm_page_prot = PAGE_SHARED;
- vma->vm_flags = VM_READ|VM_MAYREAD|VM_RESERVED;
- vma->vm_ops = &ia32_shared_page_vm_ops;
- down_write(¤t->mm->mmap_sem);
- {
- if (insert_vm_struct(current->mm, vma)) {
- kmem_cache_free(vm_area_cachep, vma);
- up_write(¤t->mm->mmap_sem);
- BUG();
- }
- }
- up_write(¤t->mm->mmap_sem);
- }
-
- /*
- * When user stack is not executable, push sigreturn code to stack makes
- * segmentation fault raised when returning to kernel. So now sigreturn
- * code is locked in specific gate page, which is pointed by pretcode
- * when setup_frame_ia32
- */
- vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
- if (vma) {
- vma->vm_mm = current->mm;
- vma->vm_start = IA32_GATE_OFFSET;
- vma->vm_end = vma->vm_start + PAGE_SIZE;
- vma->vm_page_prot = PAGE_COPY_EXEC;
- vma->vm_flags = VM_READ | VM_MAYREAD | VM_EXEC
- | VM_MAYEXEC | VM_RESERVED;
- vma->vm_ops = &ia32_gate_page_vm_ops;
- down_write(¤t->mm->mmap_sem);
- {
- if (insert_vm_struct(current->mm, vma)) {
- kmem_cache_free(vm_area_cachep, vma);
- up_write(¤t->mm->mmap_sem);
- BUG();
- }
- }
- up_write(¤t->mm->mmap_sem);
- }
-
- /*
- * Install LDT as anonymous memory. This gives us all-zero segment descriptors
- * until a task modifies them via modify_ldt().
- */
- vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
- if (vma) {
- vma->vm_mm = current->mm;
- vma->vm_start = IA32_LDT_OFFSET;
- vma->vm_end = vma->vm_start + PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
- vma->vm_page_prot = PAGE_SHARED;
- vma->vm_flags = VM_READ|VM_WRITE|VM_MAYREAD|VM_MAYWRITE;
- down_write(¤t->mm->mmap_sem);
- {
- if (insert_vm_struct(current->mm, vma)) {
- kmem_cache_free(vm_area_cachep, vma);
- up_write(¤t->mm->mmap_sem);
- BUG();
- }
- }
- up_write(¤t->mm->mmap_sem);
- }
-
- ia64_psr(regs)->ac = 0; /* turn off alignment checking */
- regs->loadrs = 0;
- /*
- * According to the ABI %edx points to an `atexit' handler. Since we don't have
- * one we'll set it to 0 and initialize all the other registers just to make
- * things more deterministic, ala the i386 implementation.
- */
- regs->r8 = 0; /* %eax */
- regs->r11 = 0; /* %ebx */
- regs->r9 = 0; /* %ecx */
- regs->r10 = 0; /* %edx */
- regs->r13 = 0; /* %ebp */
- regs->r14 = 0; /* %esi */
- regs->r15 = 0; /* %edi */
-
- current->thread.eflag = IA32_EFLAG;
- current->thread.fsr = IA32_FSR_DEFAULT;
- current->thread.fcr = IA32_FCR_DEFAULT;
- current->thread.fir = 0;
- current->thread.fdr = 0;
-
- /*
- * Setup GDTD. Note: GDTD is the descrambled version of the pseudo-descriptor
- * format defined by Figure 3-11 "Pseudo-Descriptor Format" in the IA-32
- * architecture manual. Also note that the only fields that are not ignored are
- * `base', `limit', 'G', `P' (must be 1) and `S' (must be 0).
- */
- regs->r31 = IA32_SEG_UNSCRAMBLE(IA32_SEG_DESCRIPTOR(IA32_GDT_OFFSET, IA32_PAGE_SIZE - 1,
- 0, 0, 0, 1, 0, 0, 0));
- /* Setup the segment selectors */
- regs->r16 = (__USER_DS << 16) | __USER_DS; /* ES == DS, GS, FS are zero */
- regs->r17 = (__USER_DS << 16) | __USER_CS; /* SS, CS; ia32_load_state() sets TSS and LDT */
-
- ia32_load_segment_descriptors(current);
- ia32_load_state(current);
-}
-
-/*
- * Undo the override of setup_arg_pages() without this ia32_setup_arg_pages()
- * will suffer infinite self recursion.
- */
-#undef setup_arg_pages
-
-int
-ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack)
-{
- int ret;
-
- ret = setup_arg_pages(bprm, IA32_STACK_TOP, executable_stack);
- if (!ret) {
- /*
- * Can't do it in ia64_elf32_init(). Needs to be done before
- * calls to elf32_map()
- */
- current->thread.ppl = ia32_init_pp_list();
- }
-
- return ret;
-}
-
-static void
-elf32_set_personality (void)
-{
- set_personality(PER_LINUX32);
- current->thread.map_base = IA32_PAGE_OFFSET/3;
-}
-
-static unsigned long
-elf32_map(struct file *filep, unsigned long addr, struct elf_phdr *eppnt,
- int prot, int type, unsigned long unused)
-{
- unsigned long pgoff = (eppnt->p_vaddr) & ~IA32_PAGE_MASK;
-
- return ia32_do_mmap(filep, (addr & IA32_PAGE_MASK), eppnt->p_filesz + pgoff, prot, type,
- eppnt->p_offset - pgoff);
-}
-
-#define cpu_uses_ia32el() (local_cpu_data->family > 0x1f)
-
-static int __init check_elf32_binfmt(void)
-{
- if (cpu_uses_ia32el()) {
- printk("Please use IA-32 EL for executing IA-32 binaries\n");
- unregister_binfmt(&elf_format);
- }
- return 0;
-}
-
-module_init(check_elf32_binfmt)
diff --git a/arch/ia64/ia32/elfcore32.h b/arch/ia64/ia32/elfcore32.h
deleted file mode 100644
index 6577257..0000000
--- a/arch/ia64/ia32/elfcore32.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * IA-32 ELF core dump support.
- *
- * Copyright (C) 2003 Arun Sharma <arun.sharma@intel.com>
- *
- * Derived from the x86_64 version
- */
-#ifndef _ELFCORE32_H_
-#define _ELFCORE32_H_
-
-#include <asm/intrinsics.h>
-#include <asm/uaccess.h>
-
-/* Override elfcore.h */
-#define _LINUX_ELFCORE_H 1
-typedef unsigned int elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct32) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct ia32_user_i387_struct elf_fpregset_t;
-typedef struct ia32_user_fxsr_struct elf_fpxregset_t;
-
-struct elf_siginfo
-{
- int si_signo; /* signal number */
- int si_code; /* extra code */
- int si_errno; /* errno */
-};
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-/*
- * Hacks are here since types between compat_timeval (= pair of s32) and
- * ia64-native timeval (= pair of s64) are not compatible, at least a file
- * arch/ia64/ia32/../../../fs/binfmt_elf.c will get warnings from compiler on
- * use of cputime_to_timeval(), which usually an alias of jiffies_to_timeval().
- */
-#define cputime_to_timeval(a,b) \
- do { (b)->tv_usec = 0; (b)->tv_sec = (a)/NSEC_PER_SEC; } while(0)
-#else
-#define jiffies_to_timeval(a,b) \
- do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; } while(0)
-#endif
-
-struct elf_prstatus
-{
- struct elf_siginfo pr_info; /* Info associated with signal */
- short pr_cursig; /* Current signal */
- unsigned int pr_sigpend; /* Set of pending signals */
- unsigned int pr_sighold; /* Set of held signals */
- pid_t pr_pid;
- pid_t pr_ppid;
- pid_t pr_pgrp;
- pid_t pr_sid;
- struct compat_timeval pr_utime; /* User time */
- struct compat_timeval pr_stime; /* System time */
- struct compat_timeval pr_cutime; /* Cumulative user time */
- struct compat_timeval pr_cstime; /* Cumulative system time */
- elf_gregset_t pr_reg; /* GP registers */
- int pr_fpvalid; /* True if math co-processor being used. */
-};
-
-#define ELF_PRARGSZ (80) /* Number of chars for args */
-
-struct elf_prpsinfo
-{
- char pr_state; /* numeric process state */
- char pr_sname; /* char for pr_state */
- char pr_zomb; /* zombie */
- char pr_nice; /* nice val */
- unsigned int pr_flag; /* flags */
- __u16 pr_uid;
- __u16 pr_gid;
- pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
- /* Lots missing */
- char pr_fname[16]; /* filename of executable */
- char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
-};
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- pr_reg[0] = regs->r11; \
- pr_reg[1] = regs->r9; \
- pr_reg[2] = regs->r10; \
- pr_reg[3] = regs->r14; \
- pr_reg[4] = regs->r15; \
- pr_reg[5] = regs->r13; \
- pr_reg[6] = regs->r8; \
- pr_reg[7] = regs->r16 & 0xffff; \
- pr_reg[8] = (regs->r16 >> 16) & 0xffff; \
- pr_reg[9] = (regs->r16 >> 32) & 0xffff; \
- pr_reg[10] = (regs->r16 >> 48) & 0xffff; \
- pr_reg[11] = regs->r1; \
- pr_reg[12] = regs->cr_iip; \
- pr_reg[13] = regs->r17 & 0xffff; \
- pr_reg[14] = ia64_getreg(_IA64_REG_AR_EFLAG); \
- pr_reg[15] = regs->r12; \
- pr_reg[16] = (regs->r17 >> 16) & 0xffff;
-
-static inline void elf_core_copy_regs(elf_gregset_t *elfregs,
- struct pt_regs *regs)
-{
- ELF_CORE_COPY_REGS((*elfregs), regs)
-}
-
-static inline int elf_core_copy_task_regs(struct task_struct *t,
- elf_gregset_t* elfregs)
-{
- ELF_CORE_COPY_REGS((*elfregs), task_pt_regs(t));
- return 1;
-}
-
-static inline int
-elf_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs, elf_fpregset_t *fpu)
-{
- struct ia32_user_i387_struct *fpstate = (void*)fpu;
- mm_segment_t old_fs;
-
- if (!tsk_used_math(tsk))
- return 0;
-
- old_fs = get_fs();
- set_fs(KERNEL_DS);
- save_ia32_fpstate(tsk, (struct ia32_user_i387_struct __user *) fpstate);
- set_fs(old_fs);
-
- return 1;
-}
-
-#define ELF_CORE_COPY_XFPREGS 1
-#define ELF_CORE_XFPREG_TYPE NT_PRXFPREG
-static inline int
-elf_core_copy_task_xfpregs(struct task_struct *tsk, elf_fpxregset_t *xfpu)
-{
- struct ia32_user_fxsr_struct *fpxstate = (void*) xfpu;
- mm_segment_t old_fs;
-
- if (!tsk_used_math(tsk))
- return 0;
-
- old_fs = get_fs();
- set_fs(KERNEL_DS);
- save_ia32_fpxstate(tsk, (struct ia32_user_fxsr_struct __user *) fpxstate);
- set_fs(old_fs);
-
- return 1;
-}
-
-#endif /* _ELFCORE32_H_ */
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
deleted file mode 100644
index 2fd7479..0000000
--- a/arch/ia64/ia32/ia32_entry.S
+++ /dev/null
@@ -1,468 +0,0 @@
-#include <asm/asmmacro.h>
-#include <asm/ia32.h>
-#include <asm/asm-offsets.h>
-#include <asm/signal.h>
-#include <asm/thread_info.h>
-
-#include "../kernel/minstate.h"
-
- /*
- * execve() is special because in case of success, we need to
- * setup a null register window frame (in case an IA-32 process
- * is exec'ing an IA-64 program).
- */
-ENTRY(ia32_execve)
- .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(3)
- alloc loc1=ar.pfs,3,2,4,0
- mov loc0=rp
- .body
- zxt4 out0=in0 // filename
- ;; // stop bit between alloc and call
- zxt4 out1=in1 // argv
- zxt4 out2=in2 // envp
- add out3=16,sp // regs
- br.call.sptk.few rp=sys32_execve
-1: cmp.ge p6,p0=r8,r0
- mov ar.pfs=loc1 // restore ar.pfs
- ;;
-(p6) mov ar.pfs=r0 // clear ar.pfs in case of success
- sxt4 r8=r8 // return 64-bit result
- mov rp=loc0
- br.ret.sptk.few rp
-END(ia32_execve)
-
-ENTRY(ia32_clone)
- .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5)
- alloc r16=ar.pfs,5,2,6,0
- DO_SAVE_SWITCH_STACK
- mov loc0=rp
- mov loc1=r16 // save ar.pfs across do_fork
- .body
- zxt4 out1=in1 // newsp
- mov out3=16 // stacksize (compensates for 16-byte scratch area)
- adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = ®s
- mov out0=in0 // out0 = clone_flags
- zxt4 out4=in2 // out4 = parent_tidptr
- zxt4 out5=in4 // out5 = child_tidptr
- br.call.sptk.many rp=do_fork
-.ret0: .restore sp
- adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack
- mov ar.pfs=loc1
- mov rp=loc0
- br.ret.sptk.many rp
-END(ia32_clone)
-
-GLOBAL_ENTRY(ia32_ret_from_clone)
- PT_REGS_UNWIND_INFO(0)
-{ /*
- * Some versions of gas generate bad unwind info if the first instruction of a
- * procedure doesn't go into the first slot of a bundle. This is a workaround.
- */
- nop.m 0
- nop.i 0
- /*
- * We need to call schedule_tail() to complete the scheduling process.
- * Called by ia64_switch_to after do_fork()->copy_thread(). r8 contains the
- * address of the previously executing task.
- */
- br.call.sptk.many rp=ia64_invoke_schedule_tail
-}
-.ret1:
- adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
- ;;
- ld4 r2=[r2]
- ;;
- mov r8=0
- and r2=_TIF_SYSCALL_TRACEAUDIT,r2
- ;;
- cmp.ne p6,p0=r2,r0
-(p6) br.cond.spnt .ia32_strace_check_retval
- ;; // prevent RAW on r8
-END(ia32_ret_from_clone)
- // fall through
-GLOBAL_ENTRY(ia32_ret_from_syscall)
- PT_REGS_UNWIND_INFO(0)
-
- cmp.ge p6,p7=r8,r0 // syscall executed successfully?
- adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8
- ;;
- alloc r3=ar.pfs,0,0,0,0 // drop the syscall argument frame
- st8 [r2]=r8 // store return value in slot for r8
- br.cond.sptk.many ia64_leave_kernel
-END(ia32_ret_from_syscall)
-
- //
- // Invoke a system call, but do some tracing before and after the call.
- // We MUST preserve the current register frame throughout this routine
- // because some system calls (such as ia64_execve) directly
- // manipulate ar.pfs.
- //
- // Input:
- // r8 = syscall number
- // b6 = syscall entry point
- //
-GLOBAL_ENTRY(ia32_trace_syscall)
- PT_REGS_UNWIND_INFO(0)
- mov r3=-38
- adds r2=IA64_PT_REGS_R8_OFFSET+16,sp
- ;;
- st8 [r2]=r3 // initialize return code to -ENOSYS
- br.call.sptk.few rp=syscall_trace_enter // give parent a chance to catch syscall args
- cmp.lt p6,p0=r8,r0 // check tracehook
- adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8
- ;;
-(p6) st8.spill [r2]=r8 // store return value in slot for r8
-(p6) br.spnt.few .ret4
-.ret2: // Need to reload arguments (they may be changed by the tracing process)
- adds r2=IA64_PT_REGS_R1_OFFSET+16,sp // r2 = &pt_regs.r1
- adds r3=IA64_PT_REGS_R13_OFFSET+16,sp // r3 = &pt_regs.r13
- mov r15=IA32_NR_syscalls
- ;;
- ld4 r8=[r2],IA64_PT_REGS_R9_OFFSET-IA64_PT_REGS_R1_OFFSET
- movl r16=ia32_syscall_table
- ;;
- ld4 r33=[r2],8 // r9 == ecx
- ld4 r37=[r3],16 // r13 == ebp
- cmp.ltu.unc p6,p7=r8,r15
- ;;
- ld4 r34=[r2],8 // r10 == edx
- ld4 r36=[r3],8 // r15 == edi
-(p6) shladd r16=r8,3,r16 // force ni_syscall if not valid syscall number
- ;;
- ld8 r16=[r16]
- ;;
- ld4 r32=[r2],8 // r11 == ebx
- mov b6=r16
- ld4 r35=[r3],8 // r14 == esi
- br.call.sptk.few rp=b6 // do the syscall
-.ia32_strace_check_retval:
- cmp.lt p6,p0=r8,r0 // syscall failed?
- adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8
- ;;
- st8.spill [r2]=r8 // store return value in slot for r8
- br.call.sptk.few rp=syscall_trace_leave // give parent a chance to catch return value
-.ret4: alloc r2=ar.pfs,0,0,0,0 // drop the syscall argument frame
- br.cond.sptk.many ia64_leave_kernel
-END(ia32_trace_syscall)
-
-GLOBAL_ENTRY(sys32_vfork)
- alloc r16=ar.pfs,2,2,4,0;;
- mov out0=IA64_CLONE_VFORK|IA64_CLONE_VM|SIGCHLD // out0 = clone_flags
- br.cond.sptk.few .fork1 // do the work
-END(sys32_vfork)
-
-GLOBAL_ENTRY(sys32_fork)
- .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
- alloc r16=ar.pfs,2,2,4,0
- mov out0=SIGCHLD // out0 = clone_flags
- ;;
-.fork1:
- mov loc0=rp
- mov loc1=r16 // save ar.pfs across do_fork
- DO_SAVE_SWITCH_STACK
-
- .body
-
- mov out1=0
- mov out3=0
- adds out2=IA64_SWITCH_STACK_SIZE+16,sp // out2 = ®s
- br.call.sptk.few rp=do_fork
-.ret5: .restore sp
- adds sp=IA64_SWITCH_STACK_SIZE,sp // pop the switch stack
- mov ar.pfs=loc1
- mov rp=loc0
- br.ret.sptk.many rp
-END(sys32_fork)
-
- .rodata
- .align 8
- .globl ia32_syscall_table
-ia32_syscall_table:
- data8 sys_ni_syscall /* 0 - old "setup(" system call*/
- data8 sys_exit
- data8 sys32_fork
- data8 sys_read
- data8 sys_write
- data8 compat_sys_open /* 5 */
- data8 sys_close
- data8 sys32_waitpid
- data8 sys_creat
- data8 sys_link
- data8 sys_unlink /* 10 */
- data8 ia32_execve
- data8 sys_chdir
- data8 compat_sys_time
- data8 sys_mknod
- data8 sys_chmod /* 15 */
- data8 sys_lchown /* 16-bit version */
- data8 sys_ni_syscall /* old break syscall holder */
- data8 sys_ni_syscall
- data8 sys32_lseek
- data8 sys_getpid /* 20 */
- data8 compat_sys_mount
- data8 sys_oldumount
- data8 sys_setuid /* 16-bit version */
- data8 sys_getuid /* 16-bit version */
- data8 compat_sys_stime /* 25 */
- data8 compat_sys_ptrace
- data8 sys32_alarm
- data8 sys_ni_syscall
- data8 sys_pause
- data8 compat_sys_utime /* 30 */
- data8 sys_ni_syscall /* old stty syscall holder */
- data8 sys_ni_syscall /* old gtty syscall holder */
- data8 sys_access
- data8 sys_nice
- data8 sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- data8 sys_sync
- data8 sys_kill
- data8 sys_rename
- data8 sys_mkdir
- data8 sys_rmdir /* 40 */
- data8 sys_dup
- data8 sys_ia64_pipe
- data8 compat_sys_times
- data8 sys_ni_syscall /* old prof syscall holder */
- data8 sys32_brk /* 45 */
- data8 sys_setgid /* 16-bit version */
- data8 sys_getgid /* 16-bit version */
- data8 sys32_signal
- data8 sys_geteuid /* 16-bit version */
- data8 sys_getegid /* 16-bit version */ /* 50 */
- data8 sys_acct
- data8 sys_umount /* recycled never used phys( */
- data8 sys_ni_syscall /* old lock syscall holder */
- data8 compat_sys_ioctl
- data8 compat_sys_fcntl /* 55 */
- data8 sys_ni_syscall /* old mpx syscall holder */
- data8 sys_setpgid
- data8 sys_ni_syscall /* old ulimit syscall holder */
- data8 sys_ni_syscall
- data8 sys_umask /* 60 */
- data8 sys_chroot
- data8 compat_sys_ustat
- data8 sys_dup2
- data8 sys_getppid
- data8 sys_getpgrp /* 65 */
- data8 sys_setsid
- data8 sys32_sigaction
- data8 sys_ni_syscall
- data8 sys_ni_syscall
- data8 sys_setreuid /* 16-bit version */ /* 70 */
- data8 sys_setregid /* 16-bit version */
- data8 sys32_sigsuspend
- data8 compat_sys_sigpending
- data8 sys_sethostname
- data8 compat_sys_setrlimit /* 75 */
- data8 compat_sys_old_getrlimit
- data8 compat_sys_getrusage
- data8 compat_sys_gettimeofday
- data8 compat_sys_settimeofday
- data8 sys32_getgroups16 /* 80 */
- data8 sys32_setgroups16
- data8 sys32_old_select
- data8 sys_symlink
- data8 sys_ni_syscall
- data8 sys_readlink /* 85 */
- data8 sys_uselib
- data8 sys_swapon
- data8 sys_reboot
- data8 compat_sys_old_readdir
- data8 sys32_mmap /* 90 */
- data8 sys32_munmap
- data8 sys_truncate
- data8 sys_ftruncate
- data8 sys_fchmod
- data8 sys_fchown /* 16-bit version */ /* 95 */
- data8 sys_getpriority
- data8 sys_setpriority
- data8 sys_ni_syscall /* old profil syscall holder */
- data8 compat_sys_statfs
- data8 compat_sys_fstatfs /* 100 */
- data8 sys_ni_syscall /* ioperm */
- data8 compat_sys_socketcall
- data8 sys_syslog
- data8 compat_sys_setitimer
- data8 compat_sys_getitimer /* 105 */
- data8 compat_sys_newstat
- data8 compat_sys_newlstat
- data8 compat_sys_newfstat
- data8 sys_ni_syscall
- data8 sys_ni_syscall /* iopl */ /* 110 */
- data8 sys_vhangup
- data8 sys_ni_syscall /* used to be sys_idle */
- data8 sys_ni_syscall
- data8 compat_sys_wait4
- data8 sys_swapoff /* 115 */
- data8 compat_sys_sysinfo
- data8 sys32_ipc
- data8 sys_fsync
- data8 sys32_sigreturn
- data8 ia32_clone /* 120 */
- data8 sys_setdomainname
- data8 sys32_newuname
- data8 sys32_modify_ldt
- data8 compat_sys_adjtimex
- data8 sys32_mprotect /* 125 */
- data8 compat_sys_sigprocmask
- data8 sys_ni_syscall /* create_module */
- data8 sys_ni_syscall /* init_module */
- data8 sys_ni_syscall /* delete_module */
- data8 sys_ni_syscall /* get_kernel_syms */ /* 130 */
- data8 sys32_quotactl
- data8 sys_getpgid
- data8 sys_fchdir
- data8 sys_ni_syscall /* sys_bdflush */
- data8 sys_sysfs /* 135 */
- data8 sys32_personality
- data8 sys_ni_syscall /* for afs_syscall */
- data8 sys_setfsuid /* 16-bit version */
- data8 sys_setfsgid /* 16-bit version */
- data8 sys_llseek /* 140 */
- data8 compat_sys_getdents
- data8 compat_sys_select
- data8 sys_flock
- data8 sys32_msync
- data8 compat_sys_readv /* 145 */
- data8 compat_sys_writev
- data8 sys_getsid
- data8 sys_fdatasync
- data8 compat_sys_sysctl
- data8 sys_mlock /* 150 */
- data8 sys_munlock
- data8 sys_mlockall
- data8 sys_munlockall
- data8 sys_sched_setparam
- data8 sys_sched_getparam /* 155 */
- data8 sys_sched_setscheduler
- data8 sys_sched_getscheduler
- data8 sys_sched_yield
- data8 sys_sched_get_priority_max
- data8 sys_sched_get_priority_min /* 160 */
- data8 sys32_sched_rr_get_interval
- data8 compat_sys_nanosleep
- data8 sys32_mremap
- data8 sys_setresuid /* 16-bit version */
- data8 sys32_getresuid16 /* 16-bit version */ /* 165 */
- data8 sys_ni_syscall /* vm86 */
- data8 sys_ni_syscall /* sys_query_module */
- data8 sys_poll
- data8 sys_ni_syscall /* nfsservctl */
- data8 sys_setresgid /* 170 */
- data8 sys32_getresgid16
- data8 sys_prctl
- data8 sys32_rt_sigreturn
- data8 sys32_rt_sigaction
- data8 sys32_rt_sigprocmask /* 175 */
- data8 sys_rt_sigpending
- data8 compat_sys_rt_sigtimedwait
- data8 sys32_rt_sigqueueinfo
- data8 compat_sys_rt_sigsuspend
- data8 sys32_pread /* 180 */
- data8 sys32_pwrite
- data8 sys_chown /* 16-bit version */
- data8 sys_getcwd
- data8 sys_capget
- data8 sys_capset /* 185 */
- data8 sys32_sigaltstack
- data8 sys32_sendfile
- data8 sys_ni_syscall /* streams1 */
- data8 sys_ni_syscall /* streams2 */
- data8 sys32_vfork /* 190 */
- data8 compat_sys_getrlimit
- data8 sys32_mmap2
- data8 sys32_truncate64
- data8 sys32_ftruncate64
- data8 sys32_stat64 /* 195 */
- data8 sys32_lstat64
- data8 sys32_fstat64
- data8 sys_lchown
- data8 sys_getuid
- data8 sys_getgid /* 200 */
- data8 sys_geteuid
- data8 sys_getegid
- data8 sys_setreuid
- data8 sys_setregid
- data8 sys_getgroups /* 205 */
- data8 sys_setgroups
- data8 sys_fchown
- data8 sys_setresuid
- data8 sys_getresuid
- data8 sys_setresgid /* 210 */
- data8 sys_getresgid
- data8 sys_chown
- data8 sys_setuid
- data8 sys_setgid
- data8 sys_setfsuid /* 215 */
- data8 sys_setfsgid
- data8 sys_pivot_root
- data8 sys_mincore
- data8 sys_madvise
- data8 compat_sys_getdents64 /* 220 */
- data8 compat_sys_fcntl64
- data8 sys_ni_syscall /* reserved for TUX */
- data8 sys_ni_syscall /* reserved for Security */
- data8 sys_gettid
- data8 sys_readahead /* 225 */
- data8 sys_setxattr
- data8 sys_lsetxattr
- data8 sys_fsetxattr
- data8 sys_getxattr
- data8 sys_lgetxattr /* 230 */
- data8 sys_fgetxattr
- data8 sys_listxattr
- data8 sys_llistxattr
- data8 sys_flistxattr
- data8 sys_removexattr /* 235 */
- data8 sys_lremovexattr
- data8 sys_fremovexattr
- data8 sys_tkill
- data8 sys_sendfile64
- data8 compat_sys_futex /* 240 */
- data8 compat_sys_sched_setaffinity
- data8 compat_sys_sched_getaffinity
- data8 sys32_set_thread_area
- data8 sys32_get_thread_area
- data8 compat_sys_io_setup /* 245 */
- data8 sys_io_destroy
- data8 compat_sys_io_getevents
- data8 compat_sys_io_submit
- data8 sys_io_cancel
- data8 sys_fadvise64 /* 250 */
- data8 sys_ni_syscall
- data8 sys_exit_group
- data8 sys_lookup_dcookie
- data8 sys_epoll_create
- data8 sys32_epoll_ctl /* 255 */
- data8 sys32_epoll_wait
- data8 sys_remap_file_pages
- data8 sys_set_tid_address
- data8 compat_sys_timer_create
- data8 compat_sys_timer_settime /* 260 */
- data8 compat_sys_timer_gettime
- data8 sys_timer_getoverrun
- data8 sys_timer_delete
- data8 compat_sys_clock_settime
- data8 compat_sys_clock_gettime /* 265 */
- data8 compat_sys_clock_getres
- data8 compat_sys_clock_nanosleep
- data8 compat_sys_statfs64
- data8 compat_sys_fstatfs64
- data8 sys_tgkill /* 270 */
- data8 compat_sys_utimes
- data8 sys32_fadvise64_64
- data8 sys_ni_syscall
- data8 sys_ni_syscall
- data8 sys_ni_syscall /* 275 */
- data8 sys_ni_syscall
- data8 compat_sys_mq_open
- data8 sys_mq_unlink
- data8 compat_sys_mq_timedsend
- data8 compat_sys_mq_timedreceive /* 280 */
- data8 compat_sys_mq_notify
- data8 compat_sys_mq_getsetattr
- data8 sys_ni_syscall /* reserved for kexec */
- data8 compat_sys_waitid
-
- // guard against failures to increase IA32_NR_syscalls
- .org ia32_syscall_table + 8*IA32_NR_syscalls
diff --git a/arch/ia64/ia32/ia32_ldt.c b/arch/ia64/ia32/ia32_ldt.c
deleted file mode 100644
index 16d51c1..0000000
--- a/arch/ia64/ia32/ia32_ldt.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2001, 2004 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * Adapted from arch/i386/kernel/ldt.c
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/vmalloc.h>
-
-#include <asm/uaccess.h>
-
-#include "ia32priv.h"
-
-/*
- * read_ldt() is not really atomic - this is not a problem since synchronization of reads
- * and writes done to the LDT has to be assured by user-space anyway. Writes are atomic,
- * to protect the security checks done on new descriptors.
- */
-static int
-read_ldt (void __user *ptr, unsigned long bytecount)
-{
- unsigned long bytes_left, n;
- char __user *src, *dst;
- char buf[256]; /* temporary buffer (don't overflow kernel stack!) */
-
- if (bytecount > IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE)
- bytecount = IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE;
-
- bytes_left = bytecount;
-
- src = (void __user *) IA32_LDT_OFFSET;
- dst = ptr;
-
- while (bytes_left) {
- n = sizeof(buf);
- if (n > bytes_left)
- n = bytes_left;
-
- /*
- * We know we're reading valid memory, but we still must guard against
- * running out of memory.
- */
- if (__copy_from_user(buf, src, n))
- return -EFAULT;
-
- if (copy_to_user(dst, buf, n))
- return -EFAULT;
-
- src += n;
- dst += n;
- bytes_left -= n;
- }
- return bytecount;
-}
-
-static int
-read_default_ldt (void __user * ptr, unsigned long bytecount)
-{
- unsigned long size;
- int err;
-
- /* XXX fix me: should return equivalent of default_ldt[0] */
- err = 0;
- size = 8;
- if (size > bytecount)
- size = bytecount;
-
- err = size;
- if (clear_user(ptr, size))
- err = -EFAULT;
-
- return err;
-}
-
-static int
-write_ldt (void __user * ptr, unsigned long bytecount, int oldmode)
-{
- struct ia32_user_desc ldt_info;
- __u64 entry;
- int ret;
-
- if (bytecount != sizeof(ldt_info))
- return -EINVAL;
- if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
- return -EFAULT;
-
- if (ldt_info.entry_number >= IA32_LDT_ENTRIES)
- return -EINVAL;
- if (ldt_info.contents == 3) {
- if (oldmode)
- return -EINVAL;
- if (ldt_info.seg_not_present == 0)
- return -EINVAL;
- }
-
- if (ldt_info.base_addr == 0 && ldt_info.limit == 0
- && (oldmode || (ldt_info.contents == 0 && ldt_info.read_exec_only == 1
- && ldt_info.seg_32bit == 0 && ldt_info.limit_in_pages == 0
- && ldt_info.seg_not_present == 1 && ldt_info.useable == 0)))
- /* allow LDTs to be cleared by the user */
- entry = 0;
- else
- /* we must set the "Accessed" bit as IVE doesn't emulate it */
- entry = IA32_SEG_DESCRIPTOR(ldt_info.base_addr, ldt_info.limit,
- (((ldt_info.read_exec_only ^ 1) << 1)
- | (ldt_info.contents << 2)) | 1,
- 1, 3, ldt_info.seg_not_present ^ 1,
- (oldmode ? 0 : ldt_info.useable),
- ldt_info.seg_32bit,
- ldt_info.limit_in_pages);
- /*
- * Install the new entry. We know we're accessing valid (mapped) user-level
- * memory, but we still need to guard against out-of-memory, hence we must use
- * put_user().
- */
- ret = __put_user(entry, (__u64 __user *) IA32_LDT_OFFSET + ldt_info.entry_number);
- ia32_load_segment_descriptors(current);
- return ret;
-}
-
-asmlinkage int
-sys32_modify_ldt (int func, unsigned int ptr, unsigned int bytecount)
-{
- int ret = -ENOSYS;
-
- switch (func) {
- case 0:
- ret = read_ldt(compat_ptr(ptr), bytecount);
- break;
- case 1:
- ret = write_ldt(compat_ptr(ptr), bytecount, 1);
- break;
- case 2:
- ret = read_default_ldt(compat_ptr(ptr), bytecount);
- break;
- case 0x11:
- ret = write_ldt(compat_ptr(ptr), bytecount, 0);
- break;
- }
- return ret;
-}
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
deleted file mode 100644
index b763ca1..0000000
--- a/arch/ia64/ia32/ia32_signal.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * IA32 Architecture-specific signal handling support.
- *
- * Copyright (C) 1999, 2001-2002, 2005 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2000 VA Linux Co
- * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
- *
- * Derived from i386 and Alpha versions.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/syscalls.h>
-#include <linux/unistd.h>
-#include <linux/wait.h>
-#include <linux/compat.h>
-
-#include <asm/intrinsics.h>
-#include <asm/uaccess.h>
-#include <asm/rse.h>
-#include <asm/sigcontext.h>
-
-#include "ia32priv.h"
-
-#include "../kernel/sigframe.h"
-
-#define A(__x) ((unsigned long)(__x))
-
-#define DEBUG_SIG 0
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-#define __IA32_NR_sigreturn 119
-#define __IA32_NR_rt_sigreturn 173
-
-struct sigframe_ia32
-{
- int pretcode;
- int sig;
- struct sigcontext_ia32 sc;
- struct _fpstate_ia32 fpstate;
- unsigned int extramask[_COMPAT_NSIG_WORDS-1];
- char retcode[8];
-};
-
-struct rt_sigframe_ia32
-{
- int pretcode;
- int sig;
- int pinfo;
- int puc;
- compat_siginfo_t info;
- struct ucontext_ia32 uc;
- struct _fpstate_ia32 fpstate;
- char retcode[8];
-};
-
-int
-copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
-{
- unsigned long tmp;
- int err;
-
- if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
- return -EFAULT;
-
- err = __get_user(to->si_signo, &from->si_signo);
- err |= __get_user(to->si_errno, &from->si_errno);
- err |= __get_user(to->si_code, &from->si_code);
-
- if (to->si_code < 0)
- err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
- else {
- switch (to->si_code >> 16) {
- case __SI_CHLD >> 16:
- err |= __get_user(to->si_utime, &from->si_utime);
- err |= __get_user(to->si_stime, &from->si_stime);
- err |= __get_user(to->si_status, &from->si_status);
- default:
- err |= __get_user(to->si_pid, &from->si_pid);
- err |= __get_user(to->si_uid, &from->si_uid);
- break;
- case __SI_FAULT >> 16:
- err |= __get_user(tmp, &from->si_addr);
- to->si_addr = (void __user *) tmp;
- break;
- case __SI_POLL >> 16:
- err |= __get_user(to->si_band, &from->si_band);
- err |= __get_user(to->si_fd, &from->si_fd);
- break;
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
- err |= __get_user(to->si_pid, &from->si_pid);
- err |= __get_user(to->si_uid, &from->si_uid);
- err |= __get_user(to->si_int, &from->si_int);
- break;
- }
- }
- return err;
-}
-
-int
-copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
-{
- unsigned int addr;
- int err;
-
- if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
- return -EFAULT;
-
- /* If you change siginfo_t structure, please be sure
- this code is fixed accordingly.
- It should never copy any pad contained in the structure
- to avoid security leaks, but must copy the generic
- 3 ints plus the relevant union member.
- This routine must convert siginfo from 64bit to 32bit as well
- at the same time. */
- err = __put_user(from->si_signo, &to->si_signo);
- err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
- if (from->si_code < 0)
- err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
- else {
- switch (from->si_code >> 16) {
- case __SI_CHLD >> 16:
- err |= __put_user(from->si_utime, &to->si_utime);
- err |= __put_user(from->si_stime, &to->si_stime);
- err |= __put_user(from->si_status, &to->si_status);
- default:
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- break;
- case __SI_FAULT >> 16:
- /* avoid type-checking warnings by copying _pad[0] in lieu of si_addr... */
- err |= __put_user(from->_sifields._pad[0], &to->si_addr);
- break;
- case __SI_POLL >> 16:
- err |= __put_user(from->si_band, &to->si_band);
- err |= __put_user(from->si_fd, &to->si_fd);
- break;
- case __SI_TIMER >> 16:
- err |= __put_user(from->si_tid, &to->si_tid);
- err |= __put_user(from->si_overrun, &to->si_overrun);
- addr = (unsigned long) from->si_ptr;
- err |= __put_user(addr, &to->si_ptr);
- break;
- case __SI_RT >> 16: /* Not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
- err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user(from->si_pid, &to->si_pid);
- addr = (unsigned long) from->si_ptr;
- err |= __put_user(addr, &to->si_ptr);
- break;
- }
- }
- return err;
-}
-
-
-/*
- * SAVE and RESTORE of ia32 fpstate info, from ia64 current state
- * Used in exception handler to pass the fpstate to the user, and restore
- * the fpstate while returning from the exception handler.
- *
- * fpstate info and their mapping to IA64 regs:
- * fpstate REG(BITS) Attribute Comments
- * cw ar.fcr(0:12) with bits 7 and 6 not used
- * sw ar.fsr(0:15)
- * tag ar.fsr(16:31) with odd numbered bits not used
- * (read returns 0, writes ignored)
- * ipoff ar.fir(0:31)
- * cssel ar.fir(32:47)
- * dataoff ar.fdr(0:31)
- * datasel ar.fdr(32:47)
- *
- * _st[(0+TOS)%8] f8
- * _st[(1+TOS)%8] f9
- * _st[(2+TOS)%8] f10
- * _st[(3+TOS)%8] f11 (f8..f11 from ptregs)
- * : : : (f12..f15 from live reg)
- * : : :
- * _st[(7+TOS)%8] f15 TOS=sw.top(bits11:13)
- *
- * status Same as sw RO
- * magic 0 as X86_FXSR_MAGIC in ia32
- * mxcsr Bits(7:15)=ar.fcr(39:47)
- * Bits(0:5) =ar.fsr(32:37) with bit 6 reserved
- * _xmm[0..7] f16..f31 (live registers)
- * with _xmm[0]
- * Bit(64:127)=f17(0:63)
- * Bit(0:63)=f16(0:63)
- * All other fields unused...
- */
-
-static int
-save_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
-{
- struct task_struct *tsk = current;
- struct pt_regs *ptp;
- struct _fpreg_ia32 *fpregp;
- char buf[32];
- unsigned long fsr, fcr, fir, fdr;
- unsigned long new_fsr;
- unsigned long num128[2];
- unsigned long mxcsr=0;
- int fp_tos, fr8_st_map;
-
- if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
- return -EFAULT;
-
- /* Read in fsr, fcr, fir, fdr and copy onto fpstate */
- fsr = ia64_getreg(_IA64_REG_AR_FSR);
- fcr = ia64_getreg(_IA64_REG_AR_FCR);
- fir = ia64_getreg(_IA64_REG_AR_FIR);
- fdr = ia64_getreg(_IA64_REG_AR_FDR);
-
- /*
- * We need to clear the exception state before calling the signal handler. Clear
- * the bits 15, bits 0-7 in fp status word. Similar to the functionality of fnclex
- * instruction.
- */
- new_fsr = fsr & ~0x80ff;
- ia64_setreg(_IA64_REG_AR_FSR, new_fsr);
-
- __put_user(fcr & 0xffff, &save->cw);
- __put_user(fsr & 0xffff, &save->sw);
- __put_user((fsr>>16) & 0xffff, &save->tag);
- __put_user(fir, &save->ipoff);
- __put_user((fir>>32) & 0xffff, &save->cssel);
- __put_user(fdr, &save->dataoff);
- __put_user((fdr>>32) & 0xffff, &save->datasel);
- __put_user(fsr & 0xffff, &save->status);
-
- mxcsr = ((fcr>>32) & 0xff80) | ((fsr>>32) & 0x3f);
- __put_user(mxcsr & 0xffff, &save->mxcsr);
- __put_user( 0, &save->magic); //#define X86_FXSR_MAGIC 0x0000
-
- /*
- * save f8..f11 from pt_regs
- * save f12..f15 from live register set
- */
- /*
- * Find the location where f8 has to go in fp reg stack. This depends on
- * TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
- * to.
- */
- fp_tos = (fsr>>11)&0x7;
- fr8_st_map = (8-fp_tos)&0x7;
- ptp = task_pt_regs(tsk);
- fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
- ia64f2ia32f(fpregp, &ptp->f8);
- copy_to_user(&save->_st[(0+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64f2ia32f(fpregp, &ptp->f9);
- copy_to_user(&save->_st[(1+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64f2ia32f(fpregp, &ptp->f10);
- copy_to_user(&save->_st[(2+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64f2ia32f(fpregp, &ptp->f11);
- copy_to_user(&save->_st[(3+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-
- ia64_stfe(fpregp, 12);
- copy_to_user(&save->_st[(4+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64_stfe(fpregp, 13);
- copy_to_user(&save->_st[(5+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64_stfe(fpregp, 14);
- copy_to_user(&save->_st[(6+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
- ia64_stfe(fpregp, 15);
- copy_to_user(&save->_st[(7+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-
- ia64_stf8(&num128[0], 16);
- ia64_stf8(&num128[1], 17);
- copy_to_user(&save->_xmm[0], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 18);
- ia64_stf8(&num128[1], 19);
- copy_to_user(&save->_xmm[1], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 20);
- ia64_stf8(&num128[1], 21);
- copy_to_user(&save->_xmm[2], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 22);
- ia64_stf8(&num128[1], 23);
- copy_to_user(&save->_xmm[3], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 24);
- ia64_stf8(&num128[1], 25);
- copy_to_user(&save->_xmm[4], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 26);
- ia64_stf8(&num128[1], 27);
- copy_to_user(&save->_xmm[5], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 28);
- ia64_stf8(&num128[1], 29);
- copy_to_user(&save->_xmm[6], num128, sizeof(struct _xmmreg_ia32));
-
- ia64_stf8(&num128[0], 30);
- ia64_stf8(&num128[1], 31);
- copy_to_user(&save->_xmm[7], num128, sizeof(struct _xmmreg_ia32));
- return 0;
-}
-
-static int
-restore_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
-{
- struct task_struct *tsk = current;
- struct pt_regs *ptp;
- unsigned int lo, hi;
- unsigned long num128[2];
- unsigned long num64, mxcsr;
- struct _fpreg_ia32 *fpregp;
- char buf[32];
- unsigned long fsr, fcr, fir, fdr;
- int fp_tos, fr8_st_map;
-
- if (!access_ok(VERIFY_READ, save, sizeof(*save)))
- return(-EFAULT);
-
- /*
- * Updating fsr, fcr, fir, fdr.
- * Just a bit more complicated than save.
- * - Need to make sure that we don't write any value other than the
- * specific fpstate info
- * - Need to make sure that the untouched part of frs, fdr, fir, fcr
- * should remain same while writing.
- * So, we do a read, change specific fields and write.
- */
- fsr = ia64_getreg(_IA64_REG_AR_FSR);
- fcr = ia64_getreg(_IA64_REG_AR_FCR);
- fir = ia64_getreg(_IA64_REG_AR_FIR);
- fdr = ia64_getreg(_IA64_REG_AR_FDR);
-
- __get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
- /* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
- __get_user(lo, (unsigned int __user *)&save->cw);
- num64 = mxcsr & 0xff10;
- num64 = (num64 << 32) | (lo & 0x1f3f);
- fcr = (fcr & (~0xff1000001f3fUL)) | num64;
-
- /* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
- __get_user(lo, (unsigned int __user *)&save->sw);
- /* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
- if ( !(lo & 0x7f) )
- lo &= (~0x8080);
- __get_user(hi, (unsigned int __user *)&save->tag);
- num64 = mxcsr & 0x3f;
- num64 = (num64 << 16) | (hi & 0xffff);
- num64 = (num64 << 16) | (lo & 0xffff);
- fsr = (fsr & (~0x3fffffffffUL)) | num64;
-
- /* setting bits 0..47 with cssel and ipoff */
- __get_user(lo, (unsigned int __user *)&save->ipoff);
- __get_user(hi, (unsigned int __user *)&save->cssel);
- num64 = hi & 0xffff;
- num64 = (num64 << 32) | lo;
- fir = (fir & (~0xffffffffffffUL)) | num64;
-
- /* setting bits 0..47 with datasel and dataoff */
- __get_user(lo, (unsigned int __user *)&save->dataoff);
- __get_user(hi, (unsigned int __user *)&save->datasel);
- num64 = hi & 0xffff;
- num64 = (num64 << 32) | lo;
- fdr = (fdr & (~0xffffffffffffUL)) | num64;
-
- ia64_setreg(_IA64_REG_AR_FSR, fsr);
- ia64_setreg(_IA64_REG_AR_FCR, fcr);
- ia64_setreg(_IA64_REG_AR_FIR, fir);
- ia64_setreg(_IA64_REG_AR_FDR, fdr);
-
- /*
- * restore f8..f11 onto pt_regs
- * restore f12..f15 onto live registers
- */
- /*
- * Find the location where f8 has to go in fp reg stack. This depends on
- * TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
- * to.
- */
- fp_tos = (fsr>>11)&0x7;
- fr8_st_map = (8-fp_tos)&0x7;
- fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
-
- ptp = task_pt_regs(tsk);
- copy_from_user(fpregp, &save->_st[(0+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia32f2ia64f(&ptp->f8, fpregp);
- copy_from_user(fpregp, &save->_st[(1+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia32f2ia64f(&ptp->f9, fpregp);
- copy_from_user(fpregp, &save->_st[(2+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia32f2ia64f(&ptp->f10, fpregp);
- copy_from_user(fpregp, &save->_st[(3+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia32f2ia64f(&ptp->f11, fpregp);
-
- copy_from_user(fpregp, &save->_st[(4+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia64_ldfe(12, fpregp);
- copy_from_user(fpregp, &save->_st[(5+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia64_ldfe(13, fpregp);
- copy_from_user(fpregp, &save->_st[(6+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia64_ldfe(14, fpregp);
- copy_from_user(fpregp, &save->_st[(7+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
- ia64_ldfe(15, fpregp);
-
- copy_from_user(num128, &save->_xmm[0], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(16, &num128[0]);
- ia64_ldf8(17, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[1], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(18, &num128[0]);
- ia64_ldf8(19, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[2], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(20, &num128[0]);
- ia64_ldf8(21, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[3], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(22, &num128[0]);
- ia64_ldf8(23, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[4], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(24, &num128[0]);
- ia64_ldf8(25, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[5], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(26, &num128[0]);
- ia64_ldf8(27, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[6], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(28, &num128[0]);
- ia64_ldf8(29, &num128[1]);
-
- copy_from_user(num128, &save->_xmm[7], sizeof(struct _xmmreg_ia32));
- ia64_ldf8(30, &num128[0]);
- ia64_ldf8(31, &num128[1]);
- return 0;
-}
-
-static inline void
-sigact_set_handler (struct k_sigaction *sa, unsigned int handler, unsigned int restorer)
-{
- if (handler + 1 <= 2)
- /* SIG_DFL, SIG_IGN, or SIG_ERR: must sign-extend to 64-bits */
- sa->sa.sa_handler = (__sighandler_t) A((int) handler);
- else
- sa->sa.sa_handler = (__sighandler_t) (((unsigned long) restorer << 32) | handler);
-}
-
-asmlinkage long
-sys32_sigsuspend (int history0, int history1, old_sigset_t mask)
-{
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- current->saved_sigmask = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- set_restore_sigmask();
- return -ERESTARTNOHAND;
-}
-
-asmlinkage long
-sys32_signal (int sig, unsigned int handler)
-{
- struct k_sigaction new_sa, old_sa;
- int ret;
-
- sigact_set_handler(&new_sa, handler, 0);
- new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
- sigemptyset(&new_sa.sa.sa_mask);
-
- ret = do_sigaction(sig, &new_sa, &old_sa);
-
- return ret ? ret : IA32_SA_HANDLER(&old_sa);
-}
-
-asmlinkage long
-sys32_rt_sigaction (int sig, struct sigaction32 __user *act,
- struct sigaction32 __user *oact, unsigned int sigsetsize)
-{
- struct k_sigaction new_ka, old_ka;
- unsigned int handler, restorer;
- int ret;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(compat_sigset_t))
- return -EINVAL;
-
- if (act) {
- ret = get_user(handler, &act->sa_handler);
- ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
- ret |= get_user(restorer, &act->sa_restorer);
- ret |= copy_from_user(&new_ka.sa.sa_mask, &act->sa_mask, sizeof(compat_sigset_t));
- if (ret)
- return -EFAULT;
-
- sigact_set_handler(&new_ka, handler, restorer);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
- ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
- ret |= copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, sizeof(compat_sigset_t));
- }
- return ret;
-}
-
-
-asmlinkage long
-sys32_rt_sigprocmask (int how, compat_sigset_t __user *set, compat_sigset_t __user *oset,
- unsigned int sigsetsize)
-{
- mm_segment_t old_fs = get_fs();
- sigset_t s;
- long ret;
-
- if (sigsetsize > sizeof(s))
- return -EINVAL;
-
- if (set) {
- memset(&s, 0, sizeof(s));
- if (copy_from_user(&s.sig, set, sigsetsize))
- return -EFAULT;
- }
- set_fs(KERNEL_DS);
- ret = sys_rt_sigprocmask(how,
- set ? (sigset_t __user *) &s : NULL,
- oset ? (sigset_t __user *) &s : NULL, sizeof(s));
- set_fs(old_fs);
- if (ret)
- return ret;
- if (oset) {
- if (copy_to_user(oset, &s.sig, sigsetsize))
- return -EFAULT;
- }
- return 0;
-}
-
-asmlinkage long
-sys32_rt_sigqueueinfo (int pid, int sig, compat_siginfo_t __user *uinfo)
-{
- mm_segment_t old_fs = get_fs();
- siginfo_t info;
- int ret;
-
- if (copy_siginfo_from_user32(&info, uinfo))
- return -EFAULT;
- set_fs(KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
- set_fs(old_fs);
- return ret;
-}
-
-asmlinkage long
-sys32_sigaction (int sig, struct old_sigaction32 __user *act, struct old_sigaction32 __user *oact)
-{
- struct k_sigaction new_ka, old_ka;
- unsigned int handler, restorer;
- int ret;
-
- if (act) {
- compat_old_sigset_t mask;
-
- ret = get_user(handler, &act->sa_handler);
- ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
- ret |= get_user(restorer, &act->sa_restorer);
- ret |= get_user(mask, &act->sa_mask);
- if (ret)
- return ret;
-
- sigact_set_handler(&new_ka, handler, restorer);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
- ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
- ret |= put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-static int
-setup_sigcontext_ia32 (struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __user *fpstate,
- struct pt_regs *regs, unsigned long mask)
-{
- int err = 0;
- unsigned long flag;
-
- if (!access_ok(VERIFY_WRITE, sc, sizeof(*sc)))
- return -EFAULT;
-
- err |= __put_user((regs->r16 >> 32) & 0xffff, (unsigned int __user *)&sc->fs);
- err |= __put_user((regs->r16 >> 48) & 0xffff, (unsigned int __user *)&sc->gs);
- err |= __put_user((regs->r16 >> 16) & 0xffff, (unsigned int __user *)&sc->es);
- err |= __put_user(regs->r16 & 0xffff, (unsigned int __user *)&sc->ds);
- err |= __put_user(regs->r15, &sc->edi);
- err |= __put_user(regs->r14, &sc->esi);
- err |= __put_user(regs->r13, &sc->ebp);
- err |= __put_user(regs->r12, &sc->esp);
- err |= __put_user(regs->r11, &sc->ebx);
- err |= __put_user(regs->r10, &sc->edx);
- err |= __put_user(regs->r9, &sc->ecx);
- err |= __put_user(regs->r8, &sc->eax);
-#if 0
- err |= __put_user(current->tss.trap_no, &sc->trapno);
- err |= __put_user(current->tss.error_code, &sc->err);
-#endif
- err |= __put_user(regs->cr_iip, &sc->eip);
- err |= __put_user(regs->r17 & 0xffff, (unsigned int __user *)&sc->cs);
- /*
- * `eflags' is in an ar register for this context
- */
- flag = ia64_getreg(_IA64_REG_AR_EFLAG);
- err |= __put_user((unsigned int)flag, &sc->eflags);
- err |= __put_user(regs->r12, &sc->esp_at_signal);
- err |= __put_user((regs->r17 >> 16) & 0xffff, (unsigned int __user *)&sc->ss);
-
- if ( save_ia32_fpstate_live(fpstate) < 0 )
- err = -EFAULT;
- else
- err |= __put_user((u32)(u64)fpstate, &sc->fpstate);
-
-#if 0
- tmp = save_i387(fpstate);
- if (tmp < 0)
- err = 1;
- else
- err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
-
- /* non-iBCS2 extensions.. */
-#endif
- err |= __put_user(mask, &sc->oldmask);
-#if 0
- err |= __put_user(current->tss.cr2, &sc->cr2);
-#endif
- return err;
-}
-
-static int
-restore_sigcontext_ia32 (struct pt_regs *regs, struct sigcontext_ia32 __user *sc, int *peax)
-{
- unsigned int err = 0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
- if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
- return(-EFAULT);
-
-#define COPY(ia64x, ia32x) err |= __get_user(regs->ia64x, &sc->ia32x)
-
-#define copyseg_gs(tmp) (regs->r16 |= (unsigned long) (tmp) << 48)
-#define copyseg_fs(tmp) (regs->r16 |= (unsigned long) (tmp) << 32)
-#define copyseg_cs(tmp) (regs->r17 |= tmp)
-#define copyseg_ss(tmp) (regs->r17 |= (unsigned long) (tmp) << 16)
-#define copyseg_es(tmp) (regs->r16 |= (unsigned long) (tmp) << 16)
-#define copyseg_ds(tmp) (regs->r16 |= tmp)
-
-#define COPY_SEG(seg) \
- { \
- unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- copyseg_##seg(tmp); \
- }
-#define COPY_SEG_STRICT(seg) \
- { \
- unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- copyseg_##seg(tmp|3); \
- }
-
- /* To make COPY_SEGs easier, we zero r16, r17 */
- regs->r16 = 0;
- regs->r17 = 0;
-
- COPY_SEG(gs);
- COPY_SEG(fs);
- COPY_SEG(es);
- COPY_SEG(ds);
- COPY(r15, edi);
- COPY(r14, esi);
- COPY(r13, ebp);
- COPY(r12, esp);
- COPY(r11, ebx);
- COPY(r10, edx);
- COPY(r9, ecx);
- COPY(cr_iip, eip);
- COPY_SEG_STRICT(cs);
- COPY_SEG_STRICT(ss);
- ia32_load_segment_descriptors(current);
- {
- unsigned int tmpflags;
- unsigned long flag;
-
- /*
- * IA32 `eflags' is not part of `pt_regs', it's in an ar register which
- * is part of the thread context. Fortunately, we are executing in the
- * IA32 process's context.
- */
- err |= __get_user(tmpflags, &sc->eflags);
- flag = ia64_getreg(_IA64_REG_AR_EFLAG);
- flag &= ~0x40DD5;
- flag |= (tmpflags & 0x40DD5);
- ia64_setreg(_IA64_REG_AR_EFLAG, flag);
-
- regs->r1 = -1; /* disable syscall checks, r1 is orig_eax */
- }
-
- {
- struct _fpstate_ia32 __user *buf = NULL;
- u32 fpstate_ptr;
- err |= get_user(fpstate_ptr, &(sc->fpstate));
- buf = compat_ptr(fpstate_ptr);
- if (buf) {
- err |= restore_ia32_fpstate_live(buf);
- }
- }
-
-#if 0
- {
- struct _fpstate * buf;
- err |= __get_user(buf, &sc->fpstate);
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- }
- }
-#endif
-
- err |= __get_user(*peax, &sc->eax);
- return err;
-
-#if 0
- badframe:
- return 1;
-#endif
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe (struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
-{
- unsigned long esp;
-
- /* Default to using normal stack (truncate off sign-extension of bit 31: */
- esp = (unsigned int) regs->r12;
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- int onstack = sas_ss_flags(esp);
-
- if (onstack == 0)
- esp = current->sas_ss_sp + current->sas_ss_size;
- else if (onstack == SS_ONSTACK) {
- /*
- * If we are on the alternate signal stack and would
- * overflow it, don't. Return an always-bogus address
- * instead so we will die with SIGSEGV.
- */
- if (!likely(on_sig_stack(esp - frame_size)))
- return (void __user *) -1L;
- }
- }
- /* Legacy stack switching not supported */
-
- esp -= frame_size;
- /* Align the stack pointer according to the i386 ABI,
- * i.e. so that on function entry ((sp + 4) & 15) == 0. */
- esp = ((esp + 4) & -16ul) - 4;
- return (void __user *) esp;
-}
-
-static int
-setup_frame_ia32 (int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs)
-{
- struct exec_domain *ed = current_thread_info()->exec_domain;
- struct sigframe_ia32 __user *frame;
- int err = 0;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- err |= __put_user((ed && ed->signal_invmap && sig < 32
- ? (int)(ed->signal_invmap[sig]) : sig), &frame->sig);
-
- err |= setup_sigcontext_ia32(&frame->sc, &frame->fpstate, regs, set->sig[0]);
-
- if (_COMPAT_NSIG_WORDS > 1)
- err |= __copy_to_user(frame->extramask, (char *) &set->sig + 4,
- sizeof(frame->extramask));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ka->sa.sa_flags & SA_RESTORER) {
- unsigned int restorer = IA32_SA_RESTORER(ka);
- err |= __put_user(restorer, &frame->pretcode);
- } else {
- /* Pointing to restorer in ia32 gate page */
- err |= __put_user(IA32_GATE_OFFSET, &frame->pretcode);
- }
-
- /* This is popl %eax ; movl $,%eax ; int $0x80
- * and there for historical reasons only.
- * See arch/i386/kernel/signal.c
- */
-
- err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
- err |= __put_user(__IA32_NR_sigreturn, (int __user *)(frame->retcode+2));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->r12 = (unsigned long) frame;
- regs->cr_iip = IA32_SA_HANDLER(ka);
-
- set_fs(USER_DS);
-
-#if 0
- regs->eflags &= ~TF_MASK;
-#endif
-
-#if 0
- printk("SIG deliver (%s:%d): sig=%d sp=%p pc=%lx ra=%x\n",
- current->comm, current->pid, sig, (void *) frame, regs->cr_iip, frame->pretcode);
-#endif
-
- return 1;
-
- give_sigsegv:
- force_sigsegv(sig, current);
- return 0;
-}
-
-static int
-setup_rt_frame_ia32 (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
-{
- struct exec_domain *ed = current_thread_info()->exec_domain;
- compat_uptr_t pinfo, puc;
- struct rt_sigframe_ia32 __user *frame;
- int err = 0;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- err |= __put_user((ed && ed->signal_invmap
- && sig < 32 ? ed->signal_invmap[sig] : sig), &frame->sig);
-
- pinfo = (long __user) &frame->info;
- puc = (long __user) &frame->uc;
- err |= __put_user(pinfo, &frame->pinfo);
- err |= __put_user(puc, &frame->puc);
- err |= copy_siginfo_to_user32(&frame->info, info);
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(regs->r12), &frame->uc.uc_stack.ss_flags);
- err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext_ia32(&frame->uc.uc_mcontext, &frame->fpstate, regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto give_sigsegv;
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- if (ka->sa.sa_flags & SA_RESTORER) {
- unsigned int restorer = IA32_SA_RESTORER(ka);
- err |= __put_user(restorer, &frame->pretcode);
- } else {
- /* Pointing to rt_restorer in ia32 gate page */
- err |= __put_user(IA32_GATE_OFFSET + 8, &frame->pretcode);
- }
-
- /* This is movl $,%eax ; int $0x80
- * and there for historical reasons only.
- * See arch/i386/kernel/signal.c
- */
-
- err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
- err |= __put_user(__IA32_NR_rt_sigreturn, (int __user *)(frame->retcode+1));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->r12 = (unsigned long) frame;
- regs->cr_iip = IA32_SA_HANDLER(ka);
-
- set_fs(USER_DS);
-
-#if 0
- regs->eflags &= ~TF_MASK;
-#endif
-
-#if 0
- printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%x\n",
- current->comm, current->pid, (void *) frame, regs->cr_iip, frame->pretcode);
-#endif
-
- return 1;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return 0;
-}
-
-int
-ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
-{
- /* Set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- return setup_rt_frame_ia32(sig, ka, info, set, regs);
- else
- return setup_frame_ia32(sig, ka, set, regs);
-}
-
-asmlinkage long
-sys32_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4, int arg5,
- int arg6, int arg7, struct pt_regs regs)
-{
- unsigned long esp = (unsigned int) regs.r12;
- struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(esp - 8);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_COMPAT_NSIG_WORDS > 1 && __copy_from_user((char *) &set.sig + 4, &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext_ia32(®s, &frame->sc, &eax))
- goto badframe;
- return eax;
-
- badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage long
-sys32_rt_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4,
- int arg5, int arg6, int arg7, struct pt_regs regs)
-{
- unsigned long esp = (unsigned int) regs.r12;
- struct rt_sigframe_ia32 __user *frame = (struct rt_sigframe_ia32 __user *)(esp - 4);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext_ia32(®s, &frame->uc.uc_mcontext, &eax))
- goto badframe;
-
- /* It is more difficult to avoid calling this function than to
- call it and ignore errors. */
- do_sigaltstack((stack_t __user *) &frame->uc.uc_stack, NULL, esp);
-
- return eax;
-
- badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
deleted file mode 100644
index a6965dd..0000000
--- a/arch/ia64/ia32/ia32_support.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * IA32 helper functions
- *
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2001-2002 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00 A. Mallick added csd/ssd/tssd for ia32 thread context
- * 02/19/01 D. Mosberger dropped tssd; it's not needed
- * 09/14/01 D. Mosberger fixed memory management for gdt/tss page
- * 09/29/01 D. Mosberger added ia32_load_segment_descriptors()
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-
-#include <asm/intrinsics.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-#include "ia32priv.h"
-
-extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
-
-struct page *ia32_shared_page[NR_CPUS];
-unsigned long *ia32_boot_gdt;
-unsigned long *cpu_gdt_table[NR_CPUS];
-struct page *ia32_gate_page;
-
-static unsigned long
-load_desc (u16 selector)
-{
- unsigned long *table, limit, index;
-
- if (!selector)
- return 0;
- if (selector & IA32_SEGSEL_TI) {
- table = (unsigned long *) IA32_LDT_OFFSET;
- limit = IA32_LDT_ENTRIES;
- } else {
- table = cpu_gdt_table[smp_processor_id()];
- limit = IA32_PAGE_SIZE / sizeof(ia32_boot_gdt[0]);
- }
- index = selector >> IA32_SEGSEL_INDEX_SHIFT;
- if (index >= limit)
- return 0;
- return IA32_SEG_UNSCRAMBLE(table[index]);
-}
-
-void
-ia32_load_segment_descriptors (struct task_struct *task)
-{
- struct pt_regs *regs = task_pt_regs(task);
-
- /* Setup the segment descriptors */
- regs->r24 = load_desc(regs->r16 >> 16); /* ESD */
- regs->r27 = load_desc(regs->r16 >> 0); /* DSD */
- regs->r28 = load_desc(regs->r16 >> 32); /* FSD */
- regs->r29 = load_desc(regs->r16 >> 48); /* GSD */
- regs->ar_csd = load_desc(regs->r17 >> 0); /* CSD */
- regs->ar_ssd = load_desc(regs->r17 >> 16); /* SSD */
-}
-
-int
-ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs)
-{
- struct desc_struct *desc;
- struct ia32_user_desc info;
- int idx;
-
- if (copy_from_user(&info, (void __user *)(childregs->r14 & 0xffffffff), sizeof(info)))
- return -EFAULT;
- if (LDT_empty(&info))
- return -EINVAL;
-
- idx = info.entry_number;
- if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
- return -EINVAL;
-
- desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
- desc->a = LDT_entry_a(&info);
- desc->b = LDT_entry_b(&info);
-
- /* XXX: can this be done in a cleaner way ? */
- load_TLS(&child->thread, smp_processor_id());
- ia32_load_segment_descriptors(child);
- load_TLS(¤t->thread, smp_processor_id());
-
- return 0;
-}
-
-void
-ia32_save_state (struct task_struct *t)
-{
- t->thread.eflag = ia64_getreg(_IA64_REG_AR_EFLAG);
- t->thread.fsr = ia64_getreg(_IA64_REG_AR_FSR);
- t->thread.fcr = ia64_getreg(_IA64_REG_AR_FCR);
- t->thread.fir = ia64_getreg(_IA64_REG_AR_FIR);
- t->thread.fdr = ia64_getreg(_IA64_REG_AR_FDR);
- ia64_set_kr(IA64_KR_IO_BASE, t->thread.old_iob);
- ia64_set_kr(IA64_KR_TSSD, t->thread.old_k1);
-}
-
-void
-ia32_load_state (struct task_struct *t)
-{
- unsigned long eflag, fsr, fcr, fir, fdr, tssd;
- struct pt_regs *regs = task_pt_regs(t);
-
- eflag = t->thread.eflag;
- fsr = t->thread.fsr;
- fcr = t->thread.fcr;
- fir = t->thread.fir;
- fdr = t->thread.fdr;
- tssd = load_desc(_TSS); /* TSSD */
-
- ia64_setreg(_IA64_REG_AR_EFLAG, eflag);
- ia64_setreg(_IA64_REG_AR_FSR, fsr);
- ia64_setreg(_IA64_REG_AR_FCR, fcr);
- ia64_setreg(_IA64_REG_AR_FIR, fir);
- ia64_setreg(_IA64_REG_AR_FDR, fdr);
- current->thread.old_iob = ia64_get_kr(IA64_KR_IO_BASE);
- current->thread.old_k1 = ia64_get_kr(IA64_KR_TSSD);
- ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
- ia64_set_kr(IA64_KR_TSSD, tssd);
-
- regs->r17 = (_TSS << 48) | (_LDT << 32) | (__u32) regs->r17;
- regs->r30 = load_desc(_LDT); /* LDTD */
- load_TLS(&t->thread, smp_processor_id());
-}
-
-/*
- * Setup IA32 GDT and TSS
- */
-void
-ia32_gdt_init (void)
-{
- int cpu = smp_processor_id();
-
- ia32_shared_page[cpu] = alloc_page(GFP_KERNEL);
- if (!ia32_shared_page[cpu])
- panic("failed to allocate ia32_shared_page[%d]\n", cpu);
-
- cpu_gdt_table[cpu] = page_address(ia32_shared_page[cpu]);
-
- /* Copy from the boot cpu's GDT */
- memcpy(cpu_gdt_table[cpu], ia32_boot_gdt, PAGE_SIZE);
-}
-
-
-/*
- * Setup IA32 GDT and TSS
- */
-static void
-ia32_boot_gdt_init (void)
-{
- unsigned long ldt_size;
-
- ia32_shared_page[0] = alloc_page(GFP_KERNEL);
- if (!ia32_shared_page[0])
- panic("failed to allocate ia32_shared_page[0]\n");
-
- ia32_boot_gdt = page_address(ia32_shared_page[0]);
- cpu_gdt_table[0] = ia32_boot_gdt;
-
- /* CS descriptor in IA-32 (scrambled) format */
- ia32_boot_gdt[__USER_CS >> 3]
- = IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
- 0xb, 1, 3, 1, 1, 1, 1);
-
- /* DS descriptor in IA-32 (scrambled) format */
- ia32_boot_gdt[__USER_DS >> 3]
- = IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
- 0x3, 1, 3, 1, 1, 1, 1);
-
- ldt_size = PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
- ia32_boot_gdt[TSS_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_TSS_OFFSET, 235,
- 0xb, 0, 3, 1, 1, 1, 0);
- ia32_boot_gdt[LDT_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_LDT_OFFSET, ldt_size - 1,
- 0x2, 0, 3, 1, 1, 1, 0);
-}
-
-static void
-ia32_gate_page_init(void)
-{
- unsigned long *sr;
-
- ia32_gate_page = alloc_page(GFP_KERNEL);
- sr = page_address(ia32_gate_page);
- /* This is popl %eax ; movl $,%eax ; int $0x80 */
- *sr++ = 0xb858 | (__IA32_NR_sigreturn << 16) | (0x80cdUL << 48);
-
- /* This is movl $,%eax ; int $0x80 */
- *sr = 0xb8 | (__IA32_NR_rt_sigreturn << 8) | (0x80cdUL << 40);
-}
-
-void
-ia32_mem_init(void)
-{
- ia32_boot_gdt_init();
- ia32_gate_page_init();
-}
-
-/*
- * Handle bad IA32 interrupt via syscall
- */
-void
-ia32_bad_interrupt (unsigned long int_num, struct pt_regs *regs)
-{
- siginfo_t siginfo;
-
- if (die_if_kernel("Bad IA-32 interrupt", regs, int_num))
- return;
-
- siginfo.si_signo = SIGTRAP;
- siginfo.si_errno = int_num; /* XXX is it OK to abuse si_errno like this? */
- siginfo.si_flags = 0;
- siginfo.si_isr = 0;
- siginfo.si_addr = NULL;
- siginfo.si_imm = 0;
- siginfo.si_code = TRAP_BRKPT;
- force_sig_info(SIGTRAP, &siginfo, current);
-}
-
-void
-ia32_cpu_init (void)
-{
- /* initialize global ia32 state - CR0 and CR4 */
- ia64_setreg(_IA64_REG_AR_CFLAG, (((ulong) IA32_CR4 << 32) | IA32_CR0));
-}
-
-static int __init
-ia32_init (void)
-{
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
- {
- extern struct kmem_cache *ia64_partial_page_cachep;
-
- ia64_partial_page_cachep = kmem_cache_create("ia64_partial_page_cache",
- sizeof(struct ia64_partial_page),
- 0, SLAB_PANIC, NULL);
- }
-#endif
- return 0;
-}
-
-__initcall(ia32_init);
diff --git a/arch/ia64/ia32/ia32_traps.c b/arch/ia64/ia32/ia32_traps.c
deleted file mode 100644
index e486042..0000000
--- a/arch/ia64/ia32/ia32_traps.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * IA-32 exception handlers
- *
- * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2001-2002 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00 A. Mallick added siginfo for most cases (close to IA32)
- * 09/29/00 D. Mosberger added ia32_intercept()
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include "ia32priv.h"
-
-#include <asm/intrinsics.h>
-#include <asm/ptrace.h>
-
-int
-ia32_intercept (struct pt_regs *regs, unsigned long isr)
-{
- switch ((isr >> 16) & 0xff) {
- case 0: /* Instruction intercept fault */
- case 4: /* Locked Data reference fault */
- case 1: /* Gate intercept trap */
- return -1;
-
- case 2: /* System flag trap */
- if (((isr >> 14) & 0x3) >= 2) {
- /* MOV SS, POP SS instructions */
- ia64_psr(regs)->id = 1;
- return 0;
- } else
- return -1;
- }
- return -1;
-}
-
-int
-ia32_exception (struct pt_regs *regs, unsigned long isr)
-{
- struct siginfo siginfo;
-
- /* initialize these fields to avoid leaking kernel bits to user space: */
- siginfo.si_errno = 0;
- siginfo.si_flags = 0;
- siginfo.si_isr = 0;
- siginfo.si_imm = 0;
- switch ((isr >> 16) & 0xff) {
- case 1:
- case 2:
- siginfo.si_signo = SIGTRAP;
- if (isr == 0)
- siginfo.si_code = TRAP_TRACE;
- else if (isr & 0x4)
- siginfo.si_code = TRAP_BRANCH;
- else
- siginfo.si_code = TRAP_BRKPT;
- break;
-
- case 3:
- siginfo.si_signo = SIGTRAP;
- siginfo.si_code = TRAP_BRKPT;
- break;
-
- case 0: /* Divide fault */
- siginfo.si_signo = SIGFPE;
- siginfo.si_code = FPE_INTDIV;
- break;
-
- case 4: /* Overflow */
- case 5: /* Bounds fault */
- siginfo.si_signo = SIGFPE;
- siginfo.si_code = 0;
- break;
-
- case 6: /* Invalid Op-code */
- siginfo.si_signo = SIGILL;
- siginfo.si_code = ILL_ILLOPN;
- break;
-
- case 7: /* FP DNA */
- case 8: /* Double Fault */
- case 9: /* Invalid TSS */
- case 11: /* Segment not present */
- case 12: /* Stack fault */
- case 13: /* General Protection Fault */
- siginfo.si_signo = SIGSEGV;
- siginfo.si_code = 0;
- break;
-
- case 16: /* Pending FP error */
- {
- unsigned long fsr, fcr;
-
- fsr = ia64_getreg(_IA64_REG_AR_FSR);
- fcr = ia64_getreg(_IA64_REG_AR_FCR);
-
- siginfo.si_signo = SIGFPE;
- /*
- * (~cwd & swd) will mask out exceptions that are not set to unmasked
- * status. 0x3f is the exception bits in these regs, 0x200 is the
- * C1 reg you need in case of a stack fault, 0x040 is the stack
- * fault bit. We should only be taking one exception at a time,
- * so if this combination doesn't produce any single exception,
- * then we have a bad program that isn't synchronizing its FPU usage
- * and it will suffer the consequences since we won't be able to
- * fully reproduce the context of the exception
- */
- siginfo.si_isr = isr;
- siginfo.si_flags = __ISR_VALID;
- switch(((~fcr) & (fsr & 0x3f)) | (fsr & 0x240)) {
- case 0x000:
- default:
- siginfo.si_code = 0;
- break;
- case 0x001: /* Invalid Op */
- case 0x040: /* Stack Fault */
- case 0x240: /* Stack Fault | Direction */
- siginfo.si_code = FPE_FLTINV;
- break;
- case 0x002: /* Denormalize */
- case 0x010: /* Underflow */
- siginfo.si_code = FPE_FLTUND;
- break;
- case 0x004: /* Zero Divide */
- siginfo.si_code = FPE_FLTDIV;
- break;
- case 0x008: /* Overflow */
- siginfo.si_code = FPE_FLTOVF;
- break;
- case 0x020: /* Precision */
- siginfo.si_code = FPE_FLTRES;
- break;
- }
-
- break;
- }
-
- case 17: /* Alignment check */
- siginfo.si_signo = SIGSEGV;
- siginfo.si_code = BUS_ADRALN;
- break;
-
- case 19: /* SSE Numeric error */
- siginfo.si_signo = SIGFPE;
- siginfo.si_code = 0;
- break;
-
- default:
- return -1;
- }
- force_sig_info(siginfo.si_signo, &siginfo, current);
- return 0;
-}
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
deleted file mode 100644
index 0f15349..0000000
--- a/arch/ia64/ia32/ia32priv.h
+++ /dev/null
@@ -1,532 +0,0 @@
-#ifndef _ASM_IA64_IA32_PRIV_H
-#define _ASM_IA64_IA32_PRIV_H
-
-
-#include <asm/ia32.h>
-
-#ifdef CONFIG_IA32_SUPPORT
-
-#include <linux/binfmts.h>
-#include <linux/compat.h>
-#include <linux/rbtree.h>
-
-#include <asm/processor.h>
-
-/*
- * 32 bit structures for IA32 support.
- */
-
-#define IA32_PAGE_SIZE (1UL << IA32_PAGE_SHIFT)
-#define IA32_PAGE_MASK (~(IA32_PAGE_SIZE - 1))
-#define IA32_PAGE_ALIGN(addr) (((addr) + IA32_PAGE_SIZE - 1) & IA32_PAGE_MASK)
-#define IA32_CLOCKS_PER_SEC 100 /* Cast in stone for IA32 Linux */
-
-/*
- * partially mapped pages provide precise accounting of which 4k sub pages
- * are mapped and which ones are not, thereby improving IA-32 compatibility.
- */
-struct ia64_partial_page {
- struct ia64_partial_page *next; /* linked list, sorted by address */
- struct rb_node pp_rb;
- /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*64
- * should suffice.*/
- unsigned long bitmap;
- unsigned int base;
-};
-
-struct ia64_partial_page_list {
- struct ia64_partial_page *pp_head; /* list head, points to the lowest
- * addressed partial page */
- struct rb_root ppl_rb;
- struct ia64_partial_page *pp_hint; /* pp_hint->next is the last
- * accessed partial page */
- atomic_t pp_count; /* reference count */
-};
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-struct ia64_partial_page_list* ia32_init_pp_list (void);
-#else
-# define ia32_init_pp_list() 0
-#endif
-
-/* sigcontext.h */
-/*
- * As documented in the iBCS2 standard..
- *
- * The first part of "struct _fpstate" is just the
- * normal i387 hardware setup, the extra "status"
- * word is used to save the coprocessor status word
- * before entering the handler.
- */
-struct _fpreg_ia32 {
- unsigned short significand[4];
- unsigned short exponent;
-};
-
-struct _fpxreg_ia32 {
- unsigned short significand[4];
- unsigned short exponent;
- unsigned short padding[3];
-};
-
-struct _xmmreg_ia32 {
- unsigned int element[4];
-};
-
-
-struct _fpstate_ia32 {
- unsigned int cw,
- sw,
- tag,
- ipoff,
- cssel,
- dataoff,
- datasel;
- struct _fpreg_ia32 _st[8];
- unsigned short status;
- unsigned short magic; /* 0xffff = regular FPU data only */
-
- /* FXSR FPU environment */
- unsigned int _fxsr_env[6]; /* FXSR FPU env is ignored */
- unsigned int mxcsr;
- unsigned int reserved;
- struct _fpxreg_ia32 _fxsr_st[8]; /* FXSR FPU reg data is ignored */
- struct _xmmreg_ia32 _xmm[8];
- unsigned int padding[56];
-};
-
-struct sigcontext_ia32 {
- unsigned short gs, __gsh;
- unsigned short fs, __fsh;
- unsigned short es, __esh;
- unsigned short ds, __dsh;
- unsigned int edi;
- unsigned int esi;
- unsigned int ebp;
- unsigned int esp;
- unsigned int ebx;
- unsigned int edx;
- unsigned int ecx;
- unsigned int eax;
- unsigned int trapno;
- unsigned int err;
- unsigned int eip;
- unsigned short cs, __csh;
- unsigned int eflags;
- unsigned int esp_at_signal;
- unsigned short ss, __ssh;
- unsigned int fpstate; /* really (struct _fpstate_ia32 *) */
- unsigned int oldmask;
- unsigned int cr2;
-};
-
-/* user.h */
-/*
- * IA32 (Pentium III/4) FXSR, SSE support
- *
- * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
- * interacting with the FXSR-format floating point environment. Floating
- * point data can be accessed in the regular format in the usual manner,
- * and both the standard and SIMD floating point data can be accessed via
- * the new ptrace requests. In either case, changes to the FPU environment
- * will be reflected in the task's state as expected.
- */
-struct ia32_user_i387_struct {
- int cwd;
- int swd;
- int twd;
- int fip;
- int fcs;
- int foo;
- int fos;
- /* 8*10 bytes for each FP-reg = 80 bytes */
- struct _fpreg_ia32 st_space[8];
-};
-
-struct ia32_user_fxsr_struct {
- unsigned short cwd;
- unsigned short swd;
- unsigned short twd;
- unsigned short fop;
- int fip;
- int fcs;
- int foo;
- int fos;
- int mxcsr;
- int reserved;
- int st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */
- int xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */
- int padding[56];
-};
-
-/* signal.h */
-#define IA32_SET_SA_HANDLER(ka,handler,restorer) \
- ((ka)->sa.sa_handler = (__sighandler_t) \
- (((unsigned long)(restorer) << 32) \
- | ((handler) & 0xffffffff)))
-#define IA32_SA_HANDLER(ka) ((unsigned long) (ka)->sa.sa_handler & 0xffffffff)
-#define IA32_SA_RESTORER(ka) ((unsigned long) (ka)->sa.sa_handler >> 32)
-
-#define __IA32_NR_sigreturn 119
-#define __IA32_NR_rt_sigreturn 173
-
-struct sigaction32 {
- unsigned int sa_handler; /* Really a pointer, but need to deal with 32 bits */
- unsigned int sa_flags;
- unsigned int sa_restorer; /* Another 32 bit pointer */
- compat_sigset_t sa_mask; /* A 32 bit mask */
-};
-
-struct old_sigaction32 {
- unsigned int sa_handler; /* Really a pointer, but need to deal
- with 32 bits */
- compat_old_sigset_t sa_mask; /* A 32 bit mask */
- unsigned int sa_flags;
- unsigned int sa_restorer; /* Another 32 bit pointer */
-};
-
-typedef struct sigaltstack_ia32 {
- unsigned int ss_sp;
- int ss_flags;
- unsigned int ss_size;
-} stack_ia32_t;
-
-struct ucontext_ia32 {
- unsigned int uc_flags;
- unsigned int uc_link;
- stack_ia32_t uc_stack;
- struct sigcontext_ia32 uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
- unsigned int __st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long long st_rdev;
- unsigned char __pad3[4];
- unsigned int st_size_lo;
- unsigned int st_size_hi;
- unsigned int st_blksize;
- unsigned int st_blocks; /* Number 512-byte blocks allocated. */
- unsigned int __pad4; /* future possible st_blocks high bits */
- unsigned int st_atime;
- unsigned int st_atime_nsec;
- unsigned int st_mtime;
- unsigned int st_mtime_nsec;
- unsigned int st_ctime;
- unsigned int st_ctime_nsec;
- unsigned int st_ino_lo;
- unsigned int st_ino_hi;
-};
-
-typedef struct compat_siginfo {
- int si_signo;
- int si_errno;
- int si_code;
-
- union {
- int _pad[((128/sizeof(int)) - 3)];
-
- /* kill() */
- struct {
- unsigned int _pid; /* sender's pid */
- unsigned int _uid; /* sender's uid */
- } _kill;
-
- /* POSIX.1b timers */
- struct {
- compat_timer_t _tid; /* timer id */
- int _overrun; /* overrun count */
- char _pad[sizeof(unsigned int) - sizeof(int)];
- compat_sigval_t _sigval; /* same as below */
- int _sys_private; /* not to be passed to user */
- } _timer;
-
- /* POSIX.1b signals */
- struct {
- unsigned int _pid; /* sender's pid */
- unsigned int _uid; /* sender's uid */
- compat_sigval_t _sigval;
- } _rt;
-
- /* SIGCHLD */
- struct {
- unsigned int _pid; /* which child */
- unsigned int _uid; /* sender's uid */
- int _status; /* exit code */
- compat_clock_t _utime;
- compat_clock_t _stime;
- } _sigchld;
-
- /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
- struct {
- unsigned int _addr; /* faulting insn/memory ref. */
- } _sigfault;
-
- /* SIGPOLL */
- struct {
- int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
- int _fd;
- } _sigpoll;
- } _sifields;
-} compat_siginfo_t;
-
-/*
- * IA-32 ELF specific definitions for IA-64.
- */
-
-#define _ASM_IA64_ELF_H /* Don't include elf.h */
-
-#include <linux/sched.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_386)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_386
-
-#define IA32_STACK_TOP IA32_PAGE_OFFSET
-#define IA32_GATE_OFFSET IA32_PAGE_OFFSET
-#define IA32_GATE_END IA32_PAGE_OFFSET + PAGE_SIZE
-
-/*
- * The system segments (GDT, TSS, LDT) have to be mapped below 4GB so the IA-32 engine can
- * access them.
- */
-#define IA32_GDT_OFFSET (IA32_PAGE_OFFSET + PAGE_SIZE)
-#define IA32_TSS_OFFSET (IA32_PAGE_OFFSET + 2*PAGE_SIZE)
-#define IA32_LDT_OFFSET (IA32_PAGE_OFFSET + 3*PAGE_SIZE)
-
-#define ELF_EXEC_PAGESIZE IA32_PAGE_SIZE
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed.
- * Typical use of this is to invoke "./ld.so someprog" to test out a
- * new version of the loader. We need to make sure that it is out of
- * the way of the program that it will "exec", and that there is
- * sufficient room for the brk.
- */
-#define ELF_ET_DYN_BASE (IA32_PAGE_OFFSET/3 + 0x1000000)
-
-void ia64_elf32_init(struct pt_regs *regs);
-#define ELF_PLAT_INIT(_r, load_addr) ia64_elf32_init(_r)
-
-/* This macro yields a bitmask that programs can use to figure out
- what instruction set this CPU supports. */
-#define ELF_HWCAP 0
-
-/* This macro yields a string that ld.so will use to load
- implementation specific libraries for optimization. Not terribly
- relevant until we have real hardware to play with... */
-#define ELF_PLATFORM NULL
-
-#ifdef __KERNEL__
-# define SET_PERSONALITY(EX) \
- (current->personality = PER_LINUX)
-#endif
-
-#define IA32_EFLAG 0x200
-
-/*
- * IA-32 ELF specific definitions for IA-64.
- */
-
-#define __USER_CS 0x23
-#define __USER_DS 0x2B
-
-/*
- * The per-cpu GDT has 32 entries: see <asm-i386/segment.h>
- */
-#define GDT_ENTRIES 32
-
-#define GDT_SIZE (GDT_ENTRIES * 8)
-
-#define TSS_ENTRY 14
-#define LDT_ENTRY (TSS_ENTRY + 1)
-
-#define IA32_SEGSEL_RPL (0x3 << 0)
-#define IA32_SEGSEL_TI (0x1 << 2)
-#define IA32_SEGSEL_INDEX_SHIFT 3
-
-#define _TSS ((unsigned long) TSS_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
-#define _LDT ((unsigned long) LDT_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
-
-#define IA32_SEG_BASE 16
-#define IA32_SEG_TYPE 40
-#define IA32_SEG_SYS 44
-#define IA32_SEG_DPL 45
-#define IA32_SEG_P 47
-#define IA32_SEG_HIGH_LIMIT 48
-#define IA32_SEG_AVL 52
-#define IA32_SEG_DB 54
-#define IA32_SEG_G 55
-#define IA32_SEG_HIGH_BASE 56
-
-#define IA32_SEG_DESCRIPTOR(base, limit, segtype, nonsysseg, dpl, segpresent, avl, segdb, gran) \
- (((limit) & 0xffff) \
- | (((unsigned long) (base) & 0xffffff) << IA32_SEG_BASE) \
- | ((unsigned long) (segtype) << IA32_SEG_TYPE) \
- | ((unsigned long) (nonsysseg) << IA32_SEG_SYS) \
- | ((unsigned long) (dpl) << IA32_SEG_DPL) \
- | ((unsigned long) (segpresent) << IA32_SEG_P) \
- | ((((unsigned long) (limit) >> 16) & 0xf) << IA32_SEG_HIGH_LIMIT) \
- | ((unsigned long) (avl) << IA32_SEG_AVL) \
- | ((unsigned long) (segdb) << IA32_SEG_DB) \
- | ((unsigned long) (gran) << IA32_SEG_G) \
- | ((((unsigned long) (base) >> 24) & 0xff) << IA32_SEG_HIGH_BASE))
-
-#define SEG_LIM 32
-#define SEG_TYPE 52
-#define SEG_SYS 56
-#define SEG_DPL 57
-#define SEG_P 59
-#define SEG_AVL 60
-#define SEG_DB 62
-#define SEG_G 63
-
-/* Unscramble an IA-32 segment descriptor into the IA-64 format. */
-#define IA32_SEG_UNSCRAMBLE(sd) \
- ( (((sd) >> IA32_SEG_BASE) & 0xffffff) | ((((sd) >> IA32_SEG_HIGH_BASE) & 0xff) << 24) \
- | ((((sd) & 0xffff) | ((((sd) >> IA32_SEG_HIGH_LIMIT) & 0xf) << 16)) << SEG_LIM) \
- | ((((sd) >> IA32_SEG_TYPE) & 0xf) << SEG_TYPE) \
- | ((((sd) >> IA32_SEG_SYS) & 0x1) << SEG_SYS) \
- | ((((sd) >> IA32_SEG_DPL) & 0x3) << SEG_DPL) \
- | ((((sd) >> IA32_SEG_P) & 0x1) << SEG_P) \
- | ((((sd) >> IA32_SEG_AVL) & 0x1) << SEG_AVL) \
- | ((((sd) >> IA32_SEG_DB) & 0x1) << SEG_DB) \
- | ((((sd) >> IA32_SEG_G) & 0x1) << SEG_G))
-
-#define IA32_IOBASE 0x2000000000000000UL /* Virtual address for I/O space */
-
-#define IA32_CR0 0x80000001 /* Enable PG and PE bits */
-#define IA32_CR4 0x600 /* MMXEX and FXSR on */
-
-/*
- * IA32 floating point control registers starting values
- */
-
-#define IA32_FSR_DEFAULT 0x55550000 /* set all tag bits */
-#define IA32_FCR_DEFAULT 0x17800000037fUL /* extended precision, all masks */
-
-#define IA32_PTRACE_GETREGS 12
-#define IA32_PTRACE_SETREGS 13
-#define IA32_PTRACE_GETFPREGS 14
-#define IA32_PTRACE_SETFPREGS 15
-#define IA32_PTRACE_GETFPXREGS 18
-#define IA32_PTRACE_SETFPXREGS 19
-
-#define ia32_start_thread(regs,new_ip,new_sp) do { \
- set_fs(USER_DS); \
- ia64_psr(regs)->cpl = 3; /* set user mode */ \
- ia64_psr(regs)->ri = 0; /* clear return slot number */ \
- ia64_psr(regs)->is = 1; /* IA-32 instruction set */ \
- regs->cr_iip = new_ip; \
- regs->ar_rsc = 0xc; /* enforced lazy mode, priv. level 3 */ \
- regs->ar_rnat = 0; \
- regs->loadrs = 0; \
- regs->r12 = new_sp; \
-} while (0)
-
-/*
- * Local Descriptor Table (LDT) related declarations.
- */
-
-#define IA32_LDT_ENTRIES 8192 /* Maximum number of LDT entries supported. */
-#define IA32_LDT_ENTRY_SIZE 8 /* The size of each LDT entry. */
-
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- 0x7100)
-
-#define LDT_empty(info) ( \
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 )
-
-static inline void
-load_TLS (struct thread_struct *t, unsigned int cpu)
-{
- extern unsigned long *cpu_gdt_table[NR_CPUS];
-
- memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0], sizeof(long));
- memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1], sizeof(long));
- memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2], sizeof(long));
-}
-
-struct ia32_user_desc {
- unsigned int entry_number;
- unsigned int base_addr;
- unsigned int limit;
- unsigned int seg_32bit:1;
- unsigned int contents:2;
- unsigned int read_exec_only:1;
- unsigned int limit_in_pages:1;
- unsigned int seg_not_present:1;
- unsigned int useable:1;
-};
-
-struct linux_binprm;
-
-extern void ia32_init_addr_space (struct pt_regs *regs);
-extern int ia32_setup_arg_pages (struct linux_binprm *bprm, int exec_stack);
-extern unsigned long ia32_do_mmap (struct file *, unsigned long, unsigned long, int, int, loff_t);
-extern void ia32_load_segment_descriptors (struct task_struct *task);
-
-#define ia32f2ia64f(dst,src) \
-do { \
- ia64_ldfe(6,src); \
- ia64_stop(); \
- ia64_stf_spill(dst, 6); \
-} while(0)
-
-#define ia64f2ia32f(dst,src) \
-do { \
- ia64_ldf_fill(6, src); \
- ia64_stop(); \
- ia64_stfe(dst, 6); \
-} while(0)
-
-struct user_regs_struct32 {
- __u32 ebx, ecx, edx, esi, edi, ebp, eax;
- unsigned short ds, __ds, es, __es;
- unsigned short fs, __fs, gs, __gs;
- __u32 orig_eax, eip;
- unsigned short cs, __cs;
- __u32 eflags, esp;
- unsigned short ss, __ss;
-};
-
-/* Prototypes for use in elfcore32.h */
-extern int save_ia32_fpstate (struct task_struct *, struct ia32_user_i387_struct __user *);
-extern int save_ia32_fpxstate (struct task_struct *, struct ia32_user_fxsr_struct __user *);
-
-#endif /* !CONFIG_IA32_SUPPORT */
-
-#endif /* _ASM_IA64_IA32_PRIV_H */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
deleted file mode 100644
index 045b746b..0000000
--- a/arch/ia64/ia32/sys_ia32.c
+++ /dev/null
@@ -1,2765 +0,0 @@
-/*
- * sys_ia32.c: Conversion between 32bit and 64bit native syscalls. Derived from sys_sparc32.c.
- *
- * Copyright (C) 2000 VA Linux Co
- * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2000-2003, 2005 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2004 Gordon Jin <gordon.jin@intel.com>
- *
- * These routines maintain argument size conversion between 32bit and 64bit
- * environment.
- */
-
-#include <linux/kernel.h>
-#include <linux/syscalls.h>
-#include <linux/sysctl.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/signal.h>
-#include <linux/resource.h>
-#include <linux/times.h>
-#include <linux/utsname.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/mm.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
-#include <linux/uio.h>
-#include <linux/socket.h>
-#include <linux/quota.h>
-#include <linux/poll.h>
-#include <linux/eventpoll.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/regset.h>
-#include <linux/stat.h>
-#include <linux/ipc.h>
-#include <linux/capability.h>
-#include <linux/compat.h>
-#include <linux/vfs.h>
-#include <linux/mman.h>
-#include <linux/mutex.h>
-
-#include <asm/intrinsics.h>
-#include <asm/types.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-#include "ia32priv.h"
-
-#include <net/scm.h>
-#include <net/sock.h>
-
-#define DEBUG 0
-
-#if DEBUG
-# define DBG(fmt...) printk(KERN_DEBUG fmt)
-#else
-# define DBG(fmt...)
-#endif
-
-#define ROUND_UP(x,a) ((__typeof__(x))(((unsigned long)(x) + ((a) - 1)) & ~((a) - 1)))
-
-#define OFFSET4K(a) ((a) & 0xfff)
-#define PAGE_START(addr) ((addr) & PAGE_MASK)
-#define MINSIGSTKSZ_IA32 2048
-
-#define high2lowuid(uid) ((uid) > 65535 ? 65534 : (uid))
-#define high2lowgid(gid) ((gid) > 65535 ? 65534 : (gid))
-
-/*
- * Anything that modifies or inspects ia32 user virtual memory must hold this semaphore
- * while doing so.
- */
-/* XXX make per-mm: */
-static DEFINE_MUTEX(ia32_mmap_mutex);
-
-asmlinkage long
-sys32_execve (char __user *name, compat_uptr_t __user *argv, compat_uptr_t __user *envp,
- struct pt_regs *regs)
-{
- long error;
- char *filename;
- unsigned long old_map_base, old_task_size, tssd;
-
- filename = getname(name);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- return error;
-
- old_map_base = current->thread.map_base;
- old_task_size = current->thread.task_size;
- tssd = ia64_get_kr(IA64_KR_TSSD);
-
- /* we may be exec'ing a 64-bit process: reset map base, task-size, and io-base: */
- current->thread.map_base = DEFAULT_MAP_BASE;
- current->thread.task_size = DEFAULT_TASK_SIZE;
- ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
- ia64_set_kr(IA64_KR_TSSD, current->thread.old_k1);
-
- error = compat_do_execve(filename, argv, envp, regs);
- putname(filename);
-
- if (error < 0) {
- /* oops, execve failed, switch back to old values... */
- ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
- ia64_set_kr(IA64_KR_TSSD, tssd);
- current->thread.map_base = old_map_base;
- current->thread.task_size = old_task_size;
- }
-
- return error;
-}
-
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-
-
-static int
-get_page_prot (struct vm_area_struct *vma, unsigned long addr)
-{
- int prot = 0;
-
- if (!vma || vma->vm_start > addr)
- return 0;
-
- if (vma->vm_flags & VM_READ)
- prot |= PROT_READ;
- if (vma->vm_flags & VM_WRITE)
- prot |= PROT_WRITE;
- if (vma->vm_flags & VM_EXEC)
- prot |= PROT_EXEC;
- return prot;
-}
-
-/*
- * Map a subpage by creating an anonymous page that contains the union of the old page and
- * the subpage.
- */
-static unsigned long
-mmap_subpage (struct file *file, unsigned long start, unsigned long end, int prot, int flags,
- loff_t off)
-{
- void *page = NULL;
- struct inode *inode;
- unsigned long ret = 0;
- struct vm_area_struct *vma = find_vma(current->mm, start);
- int old_prot = get_page_prot(vma, start);
-
- DBG("mmap_subpage(file=%p,start=0x%lx,end=0x%lx,prot=%x,flags=%x,off=0x%llx)\n",
- file, start, end, prot, flags, off);
-
-
- /* Optimize the case where the old mmap and the new mmap are both anonymous */
- if ((old_prot & PROT_WRITE) && (flags & MAP_ANONYMOUS) && !vma->vm_file) {
- if (clear_user((void __user *) start, end - start)) {
- ret = -EFAULT;
- goto out;
- }
- goto skip_mmap;
- }
-
- page = (void *) get_zeroed_page(GFP_KERNEL);
- if (!page)
- return -ENOMEM;
-
- if (old_prot)
- copy_from_user(page, (void __user *) PAGE_START(start), PAGE_SIZE);
-
- down_write(¤t->mm->mmap_sem);
- {
- ret = do_mmap(NULL, PAGE_START(start), PAGE_SIZE, prot | PROT_WRITE,
- flags | MAP_FIXED | MAP_ANONYMOUS, 0);
- }
- up_write(¤t->mm->mmap_sem);
-
- if (IS_ERR((void *) ret))
- goto out;
-
- if (old_prot) {
- /* copy back the old page contents. */
- if (offset_in_page(start))
- copy_to_user((void __user *) PAGE_START(start), page,
- offset_in_page(start));
- if (offset_in_page(end))
- copy_to_user((void __user *) end, page + offset_in_page(end),
- PAGE_SIZE - offset_in_page(end));
- }
-
- if (!(flags & MAP_ANONYMOUS)) {
- /* read the file contents */
- inode = file->f_path.dentry->d_inode;
- if (!inode->i_fop || !file->f_op->read
- || ((*file->f_op->read)(file, (char __user *) start, end - start, &off) < 0))
- {
- ret = -EINVAL;
- goto out;
- }
- }
-
- skip_mmap:
- if (!(prot & PROT_WRITE))
- ret = sys_mprotect(PAGE_START(start), PAGE_SIZE, prot | old_prot);
- out:
- if (page)
- free_page((unsigned long) page);
- return ret;
-}
-
-/* SLAB cache for ia64_partial_page structures */
-struct kmem_cache *ia64_partial_page_cachep;
-
-/*
- * init ia64_partial_page_list.
- * return 0 means kmalloc fail.
- */
-struct ia64_partial_page_list*
-ia32_init_pp_list(void)
-{
- struct ia64_partial_page_list *p;
-
- if ((p = kmalloc(sizeof(*p), GFP_KERNEL)) == NULL)
- return p;
- p->pp_head = NULL;
- p->ppl_rb = RB_ROOT;
- p->pp_hint = NULL;
- atomic_set(&p->pp_count, 1);
- return p;
-}
-
-/*
- * Search for the partial page with @start in partial page list @ppl.
- * If finds the partial page, return the found partial page.
- * Else, return 0 and provide @pprev, @rb_link, @rb_parent to
- * be used by later __ia32_insert_pp().
- */
-static struct ia64_partial_page *
-__ia32_find_pp(struct ia64_partial_page_list *ppl, unsigned int start,
- struct ia64_partial_page **pprev, struct rb_node ***rb_link,
- struct rb_node **rb_parent)
-{
- struct ia64_partial_page *pp;
- struct rb_node **__rb_link, *__rb_parent, *rb_prev;
-
- pp = ppl->pp_hint;
- if (pp && pp->base == start)
- return pp;
-
- __rb_link = &ppl->ppl_rb.rb_node;
- rb_prev = __rb_parent = NULL;
-
- while (*__rb_link) {
- __rb_parent = *__rb_link;
- pp = rb_entry(__rb_parent, struct ia64_partial_page, pp_rb);
-
- if (pp->base == start) {
- ppl->pp_hint = pp;
- return pp;
- } else if (pp->base < start) {
- rb_prev = __rb_parent;
- __rb_link = &__rb_parent->rb_right;
- } else {
- __rb_link = &__rb_parent->rb_left;
- }
- }
-
- *rb_link = __rb_link;
- *rb_parent = __rb_parent;
- *pprev = NULL;
- if (rb_prev)
- *pprev = rb_entry(rb_prev, struct ia64_partial_page, pp_rb);
- return NULL;
-}
-
-/*
- * insert @pp into @ppl.
- */
-static void
-__ia32_insert_pp(struct ia64_partial_page_list *ppl,
- struct ia64_partial_page *pp, struct ia64_partial_page *prev,
- struct rb_node **rb_link, struct rb_node *rb_parent)
-{
- /* link list */
- if (prev) {
- pp->next = prev->next;
- prev->next = pp;
- } else {
- ppl->pp_head = pp;
- if (rb_parent)
- pp->next = rb_entry(rb_parent,
- struct ia64_partial_page, pp_rb);
- else
- pp->next = NULL;
- }
-
- /* link rb */
- rb_link_node(&pp->pp_rb, rb_parent, rb_link);
- rb_insert_color(&pp->pp_rb, &ppl->ppl_rb);
-
- ppl->pp_hint = pp;
-}
-
-/*
- * delete @pp from partial page list @ppl.
- */
-static void
-__ia32_delete_pp(struct ia64_partial_page_list *ppl,
- struct ia64_partial_page *pp, struct ia64_partial_page *prev)
-{
- if (prev) {
- prev->next = pp->next;
- if (ppl->pp_hint == pp)
- ppl->pp_hint = prev;
- } else {
- ppl->pp_head = pp->next;
- if (ppl->pp_hint == pp)
- ppl->pp_hint = pp->next;
- }
- rb_erase(&pp->pp_rb, &ppl->ppl_rb);
- kmem_cache_free(ia64_partial_page_cachep, pp);
-}
-
-static struct ia64_partial_page *
-__pp_prev(struct ia64_partial_page *pp)
-{
- struct rb_node *prev = rb_prev(&pp->pp_rb);
- if (prev)
- return rb_entry(prev, struct ia64_partial_page, pp_rb);
- else
- return NULL;
-}
-
-/*
- * Delete partial pages with address between @start and @end.
- * @start and @end are page aligned.
- */
-static void
-__ia32_delete_pp_range(unsigned int start, unsigned int end)
-{
- struct ia64_partial_page *pp, *prev;
- struct rb_node **rb_link, *rb_parent;
-
- if (start >= end)
- return;
-
- pp = __ia32_find_pp(current->thread.ppl, start, &prev,
- &rb_link, &rb_parent);
- if (pp)
- prev = __pp_prev(pp);
- else {
- if (prev)
- pp = prev->next;
- else
- pp = current->thread.ppl->pp_head;
- }
-
- while (pp && pp->base < end) {
- struct ia64_partial_page *tmp = pp->next;
- __ia32_delete_pp(current->thread.ppl, pp, prev);
- pp = tmp;
- }
-}
-
-/*
- * Set the range between @start and @end in bitmap.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- */
-static int
-__ia32_set_pp(unsigned int start, unsigned int end, int flags)
-{
- struct ia64_partial_page *pp, *prev;
- struct rb_node ** rb_link, *rb_parent;
- unsigned int pstart, start_bit, end_bit, i;
-
- pstart = PAGE_START(start);
- start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
- end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
- if (end_bit == 0)
- end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
- pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
- &rb_link, &rb_parent);
- if (pp) {
- for (i = start_bit; i < end_bit; i++)
- set_bit(i, &pp->bitmap);
- /*
- * Check: if this partial page has been set to a full page,
- * then delete it.
- */
- if (find_first_zero_bit(&pp->bitmap, sizeof(pp->bitmap)*8) >=
- PAGE_SIZE/IA32_PAGE_SIZE) {
- __ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
- }
- return 0;
- }
-
- /*
- * MAP_FIXED may lead to overlapping mmap.
- * In this case, the requested mmap area may already mmaped as a full
- * page. So check vma before adding a new partial page.
- */
- if (flags & MAP_FIXED) {
- struct vm_area_struct *vma = find_vma(current->mm, pstart);
- if (vma && vma->vm_start <= pstart)
- return 0;
- }
-
- /* new a ia64_partial_page */
- pp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
- if (!pp)
- return -ENOMEM;
- pp->base = pstart;
- pp->bitmap = 0;
- for (i=start_bit; i<end_bit; i++)
- set_bit(i, &(pp->bitmap));
- pp->next = NULL;
- __ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
- return 0;
-}
-
-/*
- * @start and @end should be IA32 page aligned, but don't need to be in the
- * same IA64 page. Split @start and @end to make sure they're in the same IA64
- * page, then call __ia32_set_pp().
- */
-static void
-ia32_set_pp(unsigned int start, unsigned int end, int flags)
-{
- down_write(¤t->mm->mmap_sem);
- if (flags & MAP_FIXED) {
- /*
- * MAP_FIXED may lead to overlapping mmap. When this happens,
- * a series of complete IA64 pages results in deletion of
- * old partial pages in that range.
- */
- __ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
- }
-
- if (end < PAGE_ALIGN(start)) {
- __ia32_set_pp(start, end, flags);
- } else {
- if (offset_in_page(start))
- __ia32_set_pp(start, PAGE_ALIGN(start), flags);
- if (offset_in_page(end))
- __ia32_set_pp(PAGE_START(end), end, flags);
- }
- up_write(¤t->mm->mmap_sem);
-}
-
-/*
- * Unset the range between @start and @end in bitmap.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- * After doing that, if the bitmap is 0, then free the page and return 1,
- * else return 0;
- * If not find the partial page in the list, then
- * If the vma exists, then the full page is set to a partial page;
- * Else return -ENOMEM.
- */
-static int
-__ia32_unset_pp(unsigned int start, unsigned int end)
-{
- struct ia64_partial_page *pp, *prev;
- struct rb_node ** rb_link, *rb_parent;
- unsigned int pstart, start_bit, end_bit, i;
- struct vm_area_struct *vma;
-
- pstart = PAGE_START(start);
- start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
- end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
- if (end_bit == 0)
- end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
-
- pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
- &rb_link, &rb_parent);
- if (pp) {
- for (i = start_bit; i < end_bit; i++)
- clear_bit(i, &pp->bitmap);
- if (pp->bitmap == 0) {
- __ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
- return 1;
- }
- return 0;
- }
-
- vma = find_vma(current->mm, pstart);
- if (!vma || vma->vm_start > pstart) {
- return -ENOMEM;
- }
-
- /* new a ia64_partial_page */
- pp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
- if (!pp)
- return -ENOMEM;
- pp->base = pstart;
- pp->bitmap = 0;
- for (i = 0; i < start_bit; i++)
- set_bit(i, &(pp->bitmap));
- for (i = end_bit; i < PAGE_SIZE / IA32_PAGE_SIZE; i++)
- set_bit(i, &(pp->bitmap));
- pp->next = NULL;
- __ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
- return 0;
-}
-
-/*
- * Delete pp between PAGE_ALIGN(start) and PAGE_START(end) by calling
- * __ia32_delete_pp_range(). Unset possible partial pages by calling
- * __ia32_unset_pp().
- * The returned value see __ia32_unset_pp().
- */
-static int
-ia32_unset_pp(unsigned int *startp, unsigned int *endp)
-{
- unsigned int start = *startp, end = *endp;
- int ret = 0;
-
- down_write(¤t->mm->mmap_sem);
-
- __ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
-
- if (end < PAGE_ALIGN(start)) {
- ret = __ia32_unset_pp(start, end);
- if (ret == 1) {
- *startp = PAGE_START(start);
- *endp = PAGE_ALIGN(end);
- }
- if (ret == 0) {
- /* to shortcut sys_munmap() in sys32_munmap() */
- *startp = PAGE_START(start);
- *endp = PAGE_START(end);
- }
- } else {
- if (offset_in_page(start)) {
- ret = __ia32_unset_pp(start, PAGE_ALIGN(start));
- if (ret == 1)
- *startp = PAGE_START(start);
- if (ret == 0)
- *startp = PAGE_ALIGN(start);
- if (ret < 0)
- goto out;
- }
- if (offset_in_page(end)) {
- ret = __ia32_unset_pp(PAGE_START(end), end);
- if (ret == 1)
- *endp = PAGE_ALIGN(end);
- if (ret == 0)
- *endp = PAGE_START(end);
- }
- }
-
- out:
- up_write(¤t->mm->mmap_sem);
- return ret;
-}
-
-/*
- * Compare the range between @start and @end with bitmap in partial page.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- */
-static int
-__ia32_compare_pp(unsigned int start, unsigned int end)
-{
- struct ia64_partial_page *pp, *prev;
- struct rb_node ** rb_link, *rb_parent;
- unsigned int pstart, start_bit, end_bit, size;
- unsigned int first_bit, next_zero_bit; /* the first range in bitmap */
-
- pstart = PAGE_START(start);
-
- pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
- &rb_link, &rb_parent);
- if (!pp)
- return 1;
-
- start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
- end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
- size = sizeof(pp->bitmap) * 8;
- first_bit = find_first_bit(&pp->bitmap, size);
- next_zero_bit = find_next_zero_bit(&pp->bitmap, size, first_bit);
- if ((start_bit < first_bit) || (end_bit > next_zero_bit)) {
- /* exceeds the first range in bitmap */
- return -ENOMEM;
- } else if ((start_bit == first_bit) && (end_bit == next_zero_bit)) {
- first_bit = find_next_bit(&pp->bitmap, size, next_zero_bit);
- if ((next_zero_bit < first_bit) && (first_bit < size))
- return 1; /* has next range */
- else
- return 0; /* no next range */
- } else
- return 1;
-}
-
-/*
- * @start and @end should be IA32 page aligned, but don't need to be in the
- * same IA64 page. Split @start and @end to make sure they're in the same IA64
- * page, then call __ia32_compare_pp().
- *
- * Take this as example: the range is the 1st and 2nd 4K page.
- * Return 0 if they fit bitmap exactly, i.e. bitmap = 00000011;
- * Return 1 if the range doesn't cover whole bitmap, e.g. bitmap = 00001111;
- * Return -ENOMEM if the range exceeds the bitmap, e.g. bitmap = 00000001 or
- * bitmap = 00000101.
- */
-static int
-ia32_compare_pp(unsigned int *startp, unsigned int *endp)
-{
- unsigned int start = *startp, end = *endp;
- int retval = 0;
-
- down_write(¤t->mm->mmap_sem);
-
- if (end < PAGE_ALIGN(start)) {
- retval = __ia32_compare_pp(start, end);
- if (retval == 0) {
- *startp = PAGE_START(start);
- *endp = PAGE_ALIGN(end);
- }
- } else {
- if (offset_in_page(start)) {
- retval = __ia32_compare_pp(start,
- PAGE_ALIGN(start));
- if (retval == 0)
- *startp = PAGE_START(start);
- if (retval < 0)
- goto out;
- }
- if (offset_in_page(end)) {
- retval = __ia32_compare_pp(PAGE_START(end), end);
- if (retval == 0)
- *endp = PAGE_ALIGN(end);
- }
- }
-
- out:
- up_write(¤t->mm->mmap_sem);
- return retval;
-}
-
-static void
-__ia32_drop_pp_list(struct ia64_partial_page_list *ppl)
-{
- struct ia64_partial_page *pp = ppl->pp_head;
-
- while (pp) {
- struct ia64_partial_page *next = pp->next;
- kmem_cache_free(ia64_partial_page_cachep, pp);
- pp = next;
- }
-
- kfree(ppl);
-}
-
-void
-ia32_drop_ia64_partial_page_list(struct task_struct *task)
-{
- struct ia64_partial_page_list* ppl = task->thread.ppl;
-
- if (ppl && atomic_dec_and_test(&ppl->pp_count))
- __ia32_drop_pp_list(ppl);
-}
-
-/*
- * Copy current->thread.ppl to ppl (already initialized).
- */
-static int
-__ia32_copy_pp_list(struct ia64_partial_page_list *ppl)
-{
- struct ia64_partial_page *pp, *tmp, *prev;
- struct rb_node **rb_link, *rb_parent;
-
- ppl->pp_head = NULL;
- ppl->pp_hint = NULL;
- ppl->ppl_rb = RB_ROOT;
- rb_link = &ppl->ppl_rb.rb_node;
- rb_parent = NULL;
- prev = NULL;
-
- for (pp = current->thread.ppl->pp_head; pp; pp = pp->next) {
- tmp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
- if (!tmp)
- return -ENOMEM;
- *tmp = *pp;
- __ia32_insert_pp(ppl, tmp, prev, rb_link, rb_parent);
- prev = tmp;
- rb_link = &tmp->pp_rb.rb_right;
- rb_parent = &tmp->pp_rb;
- }
- return 0;
-}
-
-int
-ia32_copy_ia64_partial_page_list(struct task_struct *p,
- unsigned long clone_flags)
-{
- int retval = 0;
-
- if (clone_flags & CLONE_VM) {
- atomic_inc(¤t->thread.ppl->pp_count);
- p->thread.ppl = current->thread.ppl;
- } else {
- p->thread.ppl = ia32_init_pp_list();
- if (!p->thread.ppl)
- return -ENOMEM;
- down_write(¤t->mm->mmap_sem);
- {
- retval = __ia32_copy_pp_list(p->thread.ppl);
- }
- up_write(¤t->mm->mmap_sem);
- }
-
- return retval;
-}
-
-static unsigned long
-emulate_mmap (struct file *file, unsigned long start, unsigned long len, int prot, int flags,
- loff_t off)
-{
- unsigned long tmp, end, pend, pstart, ret, is_congruent, fudge = 0;
- struct inode *inode;
- loff_t poff;
-
- end = start + len;
- pstart = PAGE_START(start);
- pend = PAGE_ALIGN(end);
-
- if (flags & MAP_FIXED) {
- ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
- if (start > pstart) {
- if (flags & MAP_SHARED)
- printk(KERN_INFO
- "%s(%d): emulate_mmap() can't share head (addr=0x%lx)\n",
- current->comm, task_pid_nr(current), start);
- ret = mmap_subpage(file, start, min(PAGE_ALIGN(start), end), prot, flags,
- off);
- if (IS_ERR((void *) ret))
- return ret;
- pstart += PAGE_SIZE;
- if (pstart >= pend)
- goto out; /* done */
- }
- if (end < pend) {
- if (flags & MAP_SHARED)
- printk(KERN_INFO
- "%s(%d): emulate_mmap() can't share tail (end=0x%lx)\n",
- current->comm, task_pid_nr(current), end);
- ret = mmap_subpage(file, max(start, PAGE_START(end)), end, prot, flags,
- (off + len) - offset_in_page(end));
- if (IS_ERR((void *) ret))
- return ret;
- pend -= PAGE_SIZE;
- if (pstart >= pend)
- goto out; /* done */
- }
- } else {
- /*
- * If a start address was specified, use it if the entire rounded out area
- * is available.
- */
- if (start && !pstart)
- fudge = 1; /* handle case of mapping to range (0,PAGE_SIZE) */
- tmp = arch_get_unmapped_area(file, pstart - fudge, pend - pstart, 0, flags);
- if (tmp != pstart) {
- pstart = tmp;
- start = pstart + offset_in_page(off); /* make start congruent with off */
- end = start + len;
- pend = PAGE_ALIGN(end);
- }
- }
-
- poff = off + (pstart - start); /* note: (pstart - start) may be negative */
- is_congruent = (flags & MAP_ANONYMOUS) || (offset_in_page(poff) == 0);
-
- if ((flags & MAP_SHARED) && !is_congruent)
- printk(KERN_INFO "%s(%d): emulate_mmap() can't share contents of incongruent mmap "
- "(addr=0x%lx,off=0x%llx)\n", current->comm, task_pid_nr(current), start, off);
-
- DBG("mmap_body: mapping [0x%lx-0x%lx) %s with poff 0x%llx\n", pstart, pend,
- is_congruent ? "congruent" : "not congruent", poff);
-
- down_write(¤t->mm->mmap_sem);
- {
- if (!(flags & MAP_ANONYMOUS) && is_congruent)
- ret = do_mmap(file, pstart, pend - pstart, prot, flags | MAP_FIXED, poff);
- else
- ret = do_mmap(NULL, pstart, pend - pstart,
- prot | ((flags & MAP_ANONYMOUS) ? 0 : PROT_WRITE),
- flags | MAP_FIXED | MAP_ANONYMOUS, 0);
- }
- up_write(¤t->mm->mmap_sem);
-
- if (IS_ERR((void *) ret))
- return ret;
-
- if (!is_congruent) {
- /* read the file contents */
- inode = file->f_path.dentry->d_inode;
- if (!inode->i_fop || !file->f_op->read
- || ((*file->f_op->read)(file, (char __user *) pstart, pend - pstart, &poff)
- < 0))
- {
- sys_munmap(pstart, pend - pstart);
- return -EINVAL;
- }
- if (!(prot & PROT_WRITE) && sys_mprotect(pstart, pend - pstart, prot) < 0)
- return -EINVAL;
- }
-
- if (!(flags & MAP_FIXED))
- ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
-out:
- return start;
-}
-
-#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
-
-static inline unsigned int
-get_prot32 (unsigned int prot)
-{
- if (prot & PROT_WRITE)
- /* on x86, PROT_WRITE implies PROT_READ which implies PROT_EEC */
- prot |= PROT_READ | PROT_WRITE | PROT_EXEC;
- else if (prot & (PROT_READ | PROT_EXEC))
- /* on x86, there is no distinction between PROT_READ and PROT_EXEC */
- prot |= (PROT_READ | PROT_EXEC);
-
- return prot;
-}
-
-unsigned long
-ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot, int flags,
- loff_t offset)
-{
- DBG("ia32_do_mmap(file=%p,addr=0x%lx,len=0x%lx,prot=%x,flags=%x,offset=0x%llx)\n",
- file, addr, len, prot, flags, offset);
-
- if (file && (!file->f_op || !file->f_op->mmap))
- return -ENODEV;
-
- len = IA32_PAGE_ALIGN(len);
- if (len == 0)
- return addr;
-
- if (len > IA32_PAGE_OFFSET || addr > IA32_PAGE_OFFSET - len)
- {
- if (flags & MAP_FIXED)
- return -ENOMEM;
- else
- return -EINVAL;
- }
-
- if (OFFSET4K(offset))
- return -EINVAL;
-
- prot = get_prot32(prot);
-
- if (flags & MAP_HUGETLB)
- return -ENOMEM;
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
- mutex_lock(&ia32_mmap_mutex);
- {
- addr = emulate_mmap(file, addr, len, prot, flags, offset);
- }
- mutex_unlock(&ia32_mmap_mutex);
-#else
- down_write(¤t->mm->mmap_sem);
- {
- addr = do_mmap(file, addr, len, prot, flags, offset);
- }
- up_write(¤t->mm->mmap_sem);
-#endif
- DBG("ia32_do_mmap: returning 0x%lx\n", addr);
- return addr;
-}
-
-/*
- * Linux/i386 didn't use to be able to handle more than 4 system call parameters, so these
- * system calls used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
- unsigned int addr;
- unsigned int len;
- unsigned int prot;
- unsigned int flags;
- unsigned int fd;
- unsigned int offset;
-};
-
-asmlinkage long
-sys32_mmap (struct mmap_arg_struct __user *arg)
-{
- struct mmap_arg_struct a;
- struct file *file = NULL;
- unsigned long addr;
- int flags;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- return -EFAULT;
-
- if (OFFSET4K(a.offset))
- return -EINVAL;
-
- flags = a.flags;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(a.fd);
- if (!file)
- return -EBADF;
- }
-
- addr = ia32_do_mmap(file, a.addr, a.len, a.prot, flags, a.offset);
-
- if (file)
- fput(file);
- return addr;
-}
-
-asmlinkage long
-sys32_mmap2 (unsigned int addr, unsigned int len, unsigned int prot, unsigned int flags,
- unsigned int fd, unsigned int pgoff)
-{
- struct file *file = NULL;
- unsigned long retval;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- return -EBADF;
- }
-
- retval = ia32_do_mmap(file, addr, len, prot, flags,
- (unsigned long) pgoff << IA32_PAGE_SHIFT);
-
- if (file)
- fput(file);
- return retval;
-}
-
-asmlinkage long
-sys32_munmap (unsigned int start, unsigned int len)
-{
- unsigned int end = start + len;
- long ret;
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
- ret = sys_munmap(start, end - start);
-#else
- if (OFFSET4K(start))
- return -EINVAL;
-
- end = IA32_PAGE_ALIGN(end);
- if (start >= end)
- return -EINVAL;
-
- ret = ia32_unset_pp(&start, &end);
- if (ret < 0)
- return ret;
-
- if (start >= end)
- return 0;
-
- mutex_lock(&ia32_mmap_mutex);
- ret = sys_munmap(start, end - start);
- mutex_unlock(&ia32_mmap_mutex);
-#endif
- return ret;
-}
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-
-/*
- * When mprotect()ing a partial page, we set the permission to the union of the old
- * settings and the new settings. In other words, it's only possible to make access to a
- * partial page less restrictive.
- */
-static long
-mprotect_subpage (unsigned long address, int new_prot)
-{
- int old_prot;
- struct vm_area_struct *vma;
-
- if (new_prot == PROT_NONE)
- return 0; /* optimize case where nothing changes... */
- vma = find_vma(current->mm, address);
- old_prot = get_page_prot(vma, address);
- return sys_mprotect(address, PAGE_SIZE, new_prot | old_prot);
-}
-
-#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
-
-asmlinkage long
-sys32_mprotect (unsigned int start, unsigned int len, int prot)
-{
- unsigned int end = start + len;
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
- long retval = 0;
-#endif
-
- prot = get_prot32(prot);
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
- return sys_mprotect(start, end - start, prot);
-#else
- if (OFFSET4K(start))
- return -EINVAL;
-
- end = IA32_PAGE_ALIGN(end);
- if (end < start)
- return -EINVAL;
-
- retval = ia32_compare_pp(&start, &end);
-
- if (retval < 0)
- return retval;
-
- mutex_lock(&ia32_mmap_mutex);
- {
- if (offset_in_page(start)) {
- /* start address is 4KB aligned but not page aligned. */
- retval = mprotect_subpage(PAGE_START(start), prot);
- if (retval < 0)
- goto out;
-
- start = PAGE_ALIGN(start);
- if (start >= end)
- goto out; /* retval is already zero... */
- }
-
- if (offset_in_page(end)) {
- /* end address is 4KB aligned but not page aligned. */
- retval = mprotect_subpage(PAGE_START(end), prot);
- if (retval < 0)
- goto out;
-
- end = PAGE_START(end);
- }
- retval = sys_mprotect(start, end - start, prot);
- }
- out:
- mutex_unlock(&ia32_mmap_mutex);
- return retval;
-#endif
-}
-
-asmlinkage long
-sys32_mremap (unsigned int addr, unsigned int old_len, unsigned int new_len,
- unsigned int flags, unsigned int new_addr)
-{
- long ret;
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
- ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
-#else
- unsigned int old_end, new_end;
-
- if (OFFSET4K(addr))
- return -EINVAL;
-
- old_len = IA32_PAGE_ALIGN(old_len);
- new_len = IA32_PAGE_ALIGN(new_len);
- old_end = addr + old_len;
- new_end = addr + new_len;
-
- if (!new_len)
- return -EINVAL;
-
- if ((flags & MREMAP_FIXED) && (OFFSET4K(new_addr)))
- return -EINVAL;
-
- if (old_len >= new_len) {
- ret = sys32_munmap(addr + new_len, old_len - new_len);
- if (ret && old_len != new_len)
- return ret;
- ret = addr;
- if (!(flags & MREMAP_FIXED) || (new_addr == addr))
- return ret;
- old_len = new_len;
- }
-
- addr = PAGE_START(addr);
- old_len = PAGE_ALIGN(old_end) - addr;
- new_len = PAGE_ALIGN(new_end) - addr;
-
- mutex_lock(&ia32_mmap_mutex);
- ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
- mutex_unlock(&ia32_mmap_mutex);
-
- if ((ret >= 0) && (old_len < new_len)) {
- /* mremap expanded successfully */
- ia32_set_pp(old_end, new_end, flags);
- }
-#endif
- return ret;
-}
-
-asmlinkage unsigned long
-sys32_alarm (unsigned int seconds)
-{
- return alarm_setitimer(seconds);
-}
-
-struct sel_arg_struct {
- unsigned int n;
- unsigned int inp;
- unsigned int outp;
- unsigned int exp;
- unsigned int tvp;
-};
-
-asmlinkage long
-sys32_old_select (struct sel_arg_struct __user *arg)
-{
- struct sel_arg_struct a;
-
- if (copy_from_user(&a, arg, sizeof(a)))
- return -EFAULT;
- return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
- compat_ptr(a.exp), compat_ptr(a.tvp));
-}
-
-#define SEMOP 1
-#define SEMGET 2
-#define SEMCTL 3
-#define SEMTIMEDOP 4
-#define MSGSND 11
-#define MSGRCV 12
-#define MSGGET 13
-#define MSGCTL 14
-#define SHMAT 21
-#define SHMDT 22
-#define SHMGET 23
-#define SHMCTL 24
-
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
-{
- int version;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- switch (call) {
- case SEMTIMEDOP:
- if (fifth)
- return compat_sys_semtimedop(first, compat_ptr(ptr),
- second, compat_ptr(fifth));
- /* else fall through for normal semop() */
- case SEMOP:
- /* struct sembuf is the same on 32 and 64bit :)) */
- return sys_semtimedop(first, compat_ptr(ptr), second,
- NULL);
- case SEMGET:
- return sys_semget(first, second, third);
- case SEMCTL:
- return compat_sys_semctl(first, second, third, compat_ptr(ptr));
-
- case MSGSND:
- return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
- case MSGRCV:
- return compat_sys_msgrcv(first, second, fifth, third, version, compat_ptr(ptr));
- case MSGGET:
- return sys_msgget((key_t) first, second);
- case MSGCTL:
- return compat_sys_msgctl(first, second, compat_ptr(ptr));
-
- case SHMAT:
- return compat_sys_shmat(first, second, third, version, compat_ptr(ptr));
- break;
- case SHMDT:
- return sys_shmdt(compat_ptr(ptr));
- case SHMGET:
- return sys_shmget(first, (unsigned)second, third);
- case SHMCTL:
- return compat_sys_shmctl(first, second, compat_ptr(ptr));
-
- default:
- return -ENOSYS;
- }
- return -EINVAL;
-}
-
-asmlinkage long
-compat_sys_wait4 (compat_pid_t pid, compat_uint_t * stat_addr, int options,
- struct compat_rusage *ru);
-
-asmlinkage long
-sys32_waitpid (int pid, unsigned int *stat_addr, int options)
-{
- return compat_sys_wait4(pid, stat_addr, options, NULL);
-}
-
-/*
- * The order in which registers are stored in the ptrace regs structure
- */
-#define PT_EBX 0
-#define PT_ECX 1
-#define PT_EDX 2
-#define PT_ESI 3
-#define PT_EDI 4
-#define PT_EBP 5
-#define PT_EAX 6
-#define PT_DS 7
-#define PT_ES 8
-#define PT_FS 9
-#define PT_GS 10
-#define PT_ORIG_EAX 11
-#define PT_EIP 12
-#define PT_CS 13
-#define PT_EFL 14
-#define PT_UESP 15
-#define PT_SS 16
-
-static unsigned int
-getreg (struct task_struct *child, int regno)
-{
- struct pt_regs *child_regs;
-
- child_regs = task_pt_regs(child);
- switch (regno / sizeof(int)) {
- case PT_EBX: return child_regs->r11;
- case PT_ECX: return child_regs->r9;
- case PT_EDX: return child_regs->r10;
- case PT_ESI: return child_regs->r14;
- case PT_EDI: return child_regs->r15;
- case PT_EBP: return child_regs->r13;
- case PT_EAX: return child_regs->r8;
- case PT_ORIG_EAX: return child_regs->r1; /* see dispatch_to_ia32_handler() */
- case PT_EIP: return child_regs->cr_iip;
- case PT_UESP: return child_regs->r12;
- case PT_EFL: return child->thread.eflag;
- case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
- return __USER_DS;
- case PT_CS: return __USER_CS;
- default:
- printk(KERN_ERR "ia32.getreg(): unknown register %d\n", regno);
- break;
- }
- return 0;
-}
-
-static void
-putreg (struct task_struct *child, int regno, unsigned int value)
-{
- struct pt_regs *child_regs;
-
- child_regs = task_pt_regs(child);
- switch (regno / sizeof(int)) {
- case PT_EBX: child_regs->r11 = value; break;
- case PT_ECX: child_regs->r9 = value; break;
- case PT_EDX: child_regs->r10 = value; break;
- case PT_ESI: child_regs->r14 = value; break;
- case PT_EDI: child_regs->r15 = value; break;
- case PT_EBP: child_regs->r13 = value; break;
- case PT_EAX: child_regs->r8 = value; break;
- case PT_ORIG_EAX: child_regs->r1 = value; break;
- case PT_EIP: child_regs->cr_iip = value; break;
- case PT_UESP: child_regs->r12 = value; break;
- case PT_EFL: child->thread.eflag = value; break;
- case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
- if (value != __USER_DS)
- printk(KERN_ERR
- "ia32.putreg: attempt to set invalid segment register %d = %x\n",
- regno, value);
- break;
- case PT_CS:
- if (value != __USER_CS)
- printk(KERN_ERR
- "ia32.putreg: attempt to set invalid segment register %d = %x\n",
- regno, value);
- break;
- default:
- printk(KERN_ERR "ia32.putreg: unknown register %d\n", regno);
- break;
- }
-}
-
-static void
-put_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
- struct switch_stack *swp, int tos)
-{
- struct _fpreg_ia32 *f;
- char buf[32];
-
- f = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
- if ((regno += tos) >= 8)
- regno -= 8;
- switch (regno) {
- case 0:
- ia64f2ia32f(f, &ptp->f8);
- break;
- case 1:
- ia64f2ia32f(f, &ptp->f9);
- break;
- case 2:
- ia64f2ia32f(f, &ptp->f10);
- break;
- case 3:
- ia64f2ia32f(f, &ptp->f11);
- break;
- case 4:
- case 5:
- case 6:
- case 7:
- ia64f2ia32f(f, &swp->f12 + (regno - 4));
- break;
- }
- copy_to_user(reg, f, sizeof(*reg));
-}
-
-static void
-get_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
- struct switch_stack *swp, int tos)
-{
-
- if ((regno += tos) >= 8)
- regno -= 8;
- switch (regno) {
- case 0:
- copy_from_user(&ptp->f8, reg, sizeof(*reg));
- break;
- case 1:
- copy_from_user(&ptp->f9, reg, sizeof(*reg));
- break;
- case 2:
- copy_from_user(&ptp->f10, reg, sizeof(*reg));
- break;
- case 3:
- copy_from_user(&ptp->f11, reg, sizeof(*reg));
- break;
- case 4:
- case 5:
- case 6:
- case 7:
- copy_from_user(&swp->f12 + (regno - 4), reg, sizeof(*reg));
- break;
- }
- return;
-}
-
-int
-save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
-{
- struct switch_stack *swp;
- struct pt_regs *ptp;
- int i, tos;
-
- if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
- return -EFAULT;
-
- __put_user(tsk->thread.fcr & 0xffff, &save->cwd);
- __put_user(tsk->thread.fsr & 0xffff, &save->swd);
- __put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
- __put_user(tsk->thread.fir, &save->fip);
- __put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
- __put_user(tsk->thread.fdr, &save->foo);
- __put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
-
- /*
- * Stack frames start with 16-bytes of temp space
- */
- swp = (struct switch_stack *)(tsk->thread.ksp + 16);
- ptp = task_pt_regs(tsk);
- tos = (tsk->thread.fsr >> 11) & 7;
- for (i = 0; i < 8; i++)
- put_fpreg(i, &save->st_space[i], ptp, swp, tos);
- return 0;
-}
-
-static int
-restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
-{
- struct switch_stack *swp;
- struct pt_regs *ptp;
- int i, tos;
- unsigned int fsrlo, fsrhi, num32;
-
- if (!access_ok(VERIFY_READ, save, sizeof(*save)))
- return(-EFAULT);
-
- __get_user(num32, (unsigned int __user *)&save->cwd);
- tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
- __get_user(fsrlo, (unsigned int __user *)&save->swd);
- __get_user(fsrhi, (unsigned int __user *)&save->twd);
- num32 = (fsrhi << 16) | fsrlo;
- tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
- __get_user(num32, (unsigned int __user *)&save->fip);
- tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
- __get_user(num32, (unsigned int __user *)&save->foo);
- tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
-
- /*
- * Stack frames start with 16-bytes of temp space
- */
- swp = (struct switch_stack *)(tsk->thread.ksp + 16);
- ptp = task_pt_regs(tsk);
- tos = (tsk->thread.fsr >> 11) & 7;
- for (i = 0; i < 8; i++)
- get_fpreg(i, &save->st_space[i], ptp, swp, tos);
- return 0;
-}
-
-int
-save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
-{
- struct switch_stack *swp;
- struct pt_regs *ptp;
- int i, tos;
- unsigned long mxcsr=0;
- unsigned long num128[2];
-
- if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
- return -EFAULT;
-
- __put_user(tsk->thread.fcr & 0xffff, &save->cwd);
- __put_user(tsk->thread.fsr & 0xffff, &save->swd);
- __put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
- __put_user(tsk->thread.fir, &save->fip);
- __put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
- __put_user(tsk->thread.fdr, &save->foo);
- __put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
-
- /*
- * Stack frames start with 16-bytes of temp space
- */
- swp = (struct switch_stack *)(tsk->thread.ksp + 16);
- ptp = task_pt_regs(tsk);
- tos = (tsk->thread.fsr >> 11) & 7;
- for (i = 0; i < 8; i++)
- put_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
-
- mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
- __put_user(mxcsr & 0xffff, &save->mxcsr);
- for (i = 0; i < 8; i++) {
- memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
- memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
- copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
- }
- return 0;
-}
-
-static int
-restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
-{
- struct switch_stack *swp;
- struct pt_regs *ptp;
- int i, tos;
- unsigned int fsrlo, fsrhi, num32;
- int mxcsr;
- unsigned long num64;
- unsigned long num128[2];
-
- if (!access_ok(VERIFY_READ, save, sizeof(*save)))
- return(-EFAULT);
-
- __get_user(num32, (unsigned int __user *)&save->cwd);
- tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
- __get_user(fsrlo, (unsigned int __user *)&save->swd);
- __get_user(fsrhi, (unsigned int __user *)&save->twd);
- num32 = (fsrhi << 16) | fsrlo;
- tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
- __get_user(num32, (unsigned int __user *)&save->fip);
- tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
- __get_user(num32, (unsigned int __user *)&save->foo);
- tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
-
- /*
- * Stack frames start with 16-bytes of temp space
- */
- swp = (struct switch_stack *)(tsk->thread.ksp + 16);
- ptp = task_pt_regs(tsk);
- tos = (tsk->thread.fsr >> 11) & 7;
- for (i = 0; i < 8; i++)
- get_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
-
- __get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
- num64 = mxcsr & 0xff10;
- tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000UL)) | (num64<<32);
- num64 = mxcsr & 0x3f;
- tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000UL)) | (num64<<32);
-
- for (i = 0; i < 8; i++) {
- copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
- memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
- memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
- }
- return 0;
-}
-
-long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
- compat_ulong_t caddr, compat_ulong_t cdata)
-{
- unsigned long addr = caddr;
- unsigned long data = cdata;
- unsigned int tmp;
- long i, ret;
-
- switch (request) {
- case PTRACE_PEEKUSR: /* read word at addr in USER area */
- ret = -EIO;
- if ((addr & 3) || addr > 17*sizeof(int))
- break;
-
- tmp = getreg(child, addr);
- if (!put_user(tmp, (unsigned int __user *) compat_ptr(data)))
- ret = 0;
- break;
-
- case PTRACE_POKEUSR: /* write word at addr in USER area */
- ret = -EIO;
- if ((addr & 3) || addr > 17*sizeof(int))
- break;
-
- putreg(child, addr, data);
- ret = 0;
- break;
-
- case IA32_PTRACE_GETREGS:
- if (!access_ok(VERIFY_WRITE, compat_ptr(data), 17*sizeof(int))) {
- ret = -EIO;
- break;
- }
- for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
- put_user(getreg(child, i), (unsigned int __user *) compat_ptr(data));
- data += sizeof(int);
- }
- ret = 0;
- break;
-
- case IA32_PTRACE_SETREGS:
- if (!access_ok(VERIFY_READ, compat_ptr(data), 17*sizeof(int))) {
- ret = -EIO;
- break;
- }
- for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
- get_user(tmp, (unsigned int __user *) compat_ptr(data));
- putreg(child, i, tmp);
- data += sizeof(int);
- }
- ret = 0;
- break;
-
- case IA32_PTRACE_GETFPREGS:
- ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
- compat_ptr(data));
- break;
-
- case IA32_PTRACE_GETFPXREGS:
- ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
- compat_ptr(data));
- break;
-
- case IA32_PTRACE_SETFPREGS:
- ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
- compat_ptr(data));
- break;
-
- case IA32_PTRACE_SETFPXREGS:
- ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
- compat_ptr(data));
- break;
-
- default:
- return compat_ptrace_request(child, request, caddr, cdata);
- }
- return ret;
-}
-
-typedef struct {
- unsigned int ss_sp;
- unsigned int ss_flags;
- unsigned int ss_size;
-} ia32_stack_t;
-
-asmlinkage long
-sys32_sigaltstack (ia32_stack_t __user *uss32, ia32_stack_t __user *uoss32,
- long arg2, long arg3, long arg4, long arg5, long arg6,
- long arg7, struct pt_regs pt)
-{
- stack_t uss, uoss;
- ia32_stack_t buf32;
- int ret;
- mm_segment_t old_fs = get_fs();
-
- if (uss32) {
- if (copy_from_user(&buf32, uss32, sizeof(ia32_stack_t)))
- return -EFAULT;
- uss.ss_sp = (void __user *) (long) buf32.ss_sp;
- uss.ss_flags = buf32.ss_flags;
- /* MINSIGSTKSZ is different for ia32 vs ia64. We lie here to pass the
- check and set it to the user requested value later */
- if ((buf32.ss_flags != SS_DISABLE) && (buf32.ss_size < MINSIGSTKSZ_IA32)) {
- ret = -ENOMEM;
- goto out;
- }
- uss.ss_size = MINSIGSTKSZ;
- }
- set_fs(KERNEL_DS);
- ret = do_sigaltstack(uss32 ? (stack_t __user *) &uss : NULL,
- (stack_t __user *) &uoss, pt.r12);
- current->sas_ss_size = buf32.ss_size;
- set_fs(old_fs);
-out:
- if (ret < 0)
- return(ret);
- if (uoss32) {
- buf32.ss_sp = (long __user) uoss.ss_sp;
- buf32.ss_flags = uoss.ss_flags;
- buf32.ss_size = uoss.ss_size;
- if (copy_to_user(uoss32, &buf32, sizeof(ia32_stack_t)))
- return -EFAULT;
- }
- return ret;
-}
-
-asmlinkage int
-sys32_msync (unsigned int start, unsigned int len, int flags)
-{
- unsigned int addr;
-
- if (OFFSET4K(start))
- return -EINVAL;
- addr = PAGE_START(start);
- return sys_msync(addr, len + (start - addr), flags);
-}
-
-asmlinkage long
-sys32_newuname (struct new_utsname __user *name)
-{
- int ret = sys_newuname(name);
-
- if (!ret)
- if (copy_to_user(name->machine, "i686\0\0\0", 8))
- ret = -EFAULT;
- return ret;
-}
-
-asmlinkage long
-sys32_getresuid16 (u16 __user *ruid, u16 __user *euid, u16 __user *suid)
-{
- uid_t a, b, c;
- int ret;
- mm_segment_t old_fs = get_fs();
-
- set_fs(KERNEL_DS);
- ret = sys_getresuid((uid_t __user *) &a, (uid_t __user *) &b, (uid_t __user *) &c);
- set_fs(old_fs);
-
- if (put_user(a, ruid) || put_user(b, euid) || put_user(c, suid))
- return -EFAULT;
- return ret;
-}
-
-asmlinkage long
-sys32_getresgid16 (u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
-{
- gid_t a, b, c;
- int ret;
- mm_segment_t old_fs = get_fs();
-
- set_fs(KERNEL_DS);
- ret = sys_getresgid((gid_t __user *) &a, (gid_t __user *) &b, (gid_t __user *) &c);
- set_fs(old_fs);
-
- if (ret)
- return ret;
-
- return put_user(a, rgid) | put_user(b, egid) | put_user(c, sgid);
-}
-
-asmlinkage long
-sys32_lseek (unsigned int fd, int offset, unsigned int whence)
-{
- /* Sign-extension of "offset" is important here... */
- return sys_lseek(fd, offset, whence);
-}
-
-static int
-groups16_to_user(short __user *grouplist, struct group_info *group_info)
-{
- int i;
- short group;
-
- for (i = 0; i < group_info->ngroups; i++) {
- group = (short)GROUP_AT(group_info, i);
- if (put_user(group, grouplist+i))
- return -EFAULT;
- }
-
- return 0;
-}
-
-static int
-groups16_from_user(struct group_info *group_info, short __user *grouplist)
-{
- int i;
- short group;
-
- for (i = 0; i < group_info->ngroups; i++) {
- if (get_user(group, grouplist+i))
- return -EFAULT;
- GROUP_AT(group_info, i) = (gid_t)group;
- }
-
- return 0;
-}
-
-asmlinkage long
-sys32_getgroups16 (int gidsetsize, short __user *grouplist)
-{
- const struct cred *cred = current_cred();
- int i;
-
- if (gidsetsize < 0)
- return -EINVAL;
-
- i = cred->group_info->ngroups;
- if (gidsetsize) {
- if (i > gidsetsize) {
- i = -EINVAL;
- goto out;
- }
- if (groups16_to_user(grouplist, cred->group_info)) {
- i = -EFAULT;
- goto out;
- }
- }
-out:
- return i;
-}
-
-asmlinkage long
-sys32_setgroups16 (int gidsetsize, short __user *grouplist)
-{
- struct group_info *group_info;
- int retval;
-
- if (!capable(CAP_SETGID))
- return -EPERM;
- if ((unsigned)gidsetsize > NGROUPS_MAX)
- return -EINVAL;
-
- group_info = groups_alloc(gidsetsize);
- if (!group_info)
- return -ENOMEM;
- retval = groups16_from_user(group_info, grouplist);
- if (retval) {
- put_group_info(group_info);
- return retval;
- }
-
- retval = set_current_groups(group_info);
- put_group_info(group_info);
-
- return retval;
-}
-
-asmlinkage long
-sys32_truncate64 (unsigned int path, unsigned int len_lo, unsigned int len_hi)
-{
- return sys_truncate(compat_ptr(path), ((unsigned long) len_hi << 32) | len_lo);
-}
-
-asmlinkage long
-sys32_ftruncate64 (int fd, unsigned int len_lo, unsigned int len_hi)
-{
- return sys_ftruncate(fd, ((unsigned long) len_hi << 32) | len_lo);
-}
-
-static int
-putstat64 (struct stat64 __user *ubuf, struct kstat *kbuf)
-{
- int err;
- u64 hdev;
-
- if (clear_user(ubuf, sizeof(*ubuf)))
- return -EFAULT;
-
- hdev = huge_encode_dev(kbuf->dev);
- err = __put_user(hdev, (u32 __user*)&ubuf->st_dev);
- err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_dev) + 1);
- err |= __put_user(kbuf->ino, &ubuf->__st_ino);
- err |= __put_user(kbuf->ino, &ubuf->st_ino_lo);
- err |= __put_user(kbuf->ino >> 32, &ubuf->st_ino_hi);
- err |= __put_user(kbuf->mode, &ubuf->st_mode);
- err |= __put_user(kbuf->nlink, &ubuf->st_nlink);
- err |= __put_user(kbuf->uid, &ubuf->st_uid);
- err |= __put_user(kbuf->gid, &ubuf->st_gid);
- hdev = huge_encode_dev(kbuf->rdev);
- err = __put_user(hdev, (u32 __user*)&ubuf->st_rdev);
- err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_rdev) + 1);
- err |= __put_user(kbuf->size, &ubuf->st_size_lo);
- err |= __put_user((kbuf->size >> 32), &ubuf->st_size_hi);
- err |= __put_user(kbuf->atime.tv_sec, &ubuf->st_atime);
- err |= __put_user(kbuf->atime.tv_nsec, &ubuf->st_atime_nsec);
- err |= __put_user(kbuf->mtime.tv_sec, &ubuf->st_mtime);
- err |= __put_user(kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec);
- err |= __put_user(kbuf->ctime.tv_sec, &ubuf->st_ctime);
- err |= __put_user(kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec);
- err |= __put_user(kbuf->blksize, &ubuf->st_blksize);
- err |= __put_user(kbuf->blocks, &ubuf->st_blocks);
- return err;
-}
-
-asmlinkage long
-sys32_stat64 (char __user *filename, struct stat64 __user *statbuf)
-{
- struct kstat s;
- long ret = vfs_stat(filename, &s);
- if (!ret)
- ret = putstat64(statbuf, &s);
- return ret;
-}
-
-asmlinkage long
-sys32_lstat64 (char __user *filename, struct stat64 __user *statbuf)
-{
- struct kstat s;
- long ret = vfs_lstat(filename, &s);
- if (!ret)
- ret = putstat64(statbuf, &s);
- return ret;
-}
-
-asmlinkage long
-sys32_fstat64 (unsigned int fd, struct stat64 __user *statbuf)
-{
- struct kstat s;
- long ret = vfs_fstat(fd, &s);
- if (!ret)
- ret = putstat64(statbuf, &s);
- return ret;
-}
-
-asmlinkage long
-sys32_sched_rr_get_interval (pid_t pid, struct compat_timespec __user *interval)
-{
- mm_segment_t old_fs = get_fs();
- struct timespec t;
- long ret;
-
- set_fs(KERNEL_DS);
- ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
- set_fs(old_fs);
- if (put_compat_timespec(&t, interval))
- return -EFAULT;
- return ret;
-}
-
-asmlinkage long
-sys32_pread (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
-{
- return sys_pread64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
-}
-
-asmlinkage long
-sys32_pwrite (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
-{
- return sys_pwrite64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
-}
-
-asmlinkage long
-sys32_sendfile (int out_fd, int in_fd, int __user *offset, unsigned int count)
-{
- mm_segment_t old_fs = get_fs();
- long ret;
- off_t of;
-
- if (offset && get_user(of, offset))
- return -EFAULT;
-
- set_fs(KERNEL_DS);
- ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *) &of : NULL, count);
- set_fs(old_fs);
-
- if (offset && put_user(of, offset))
- return -EFAULT;
-
- return ret;
-}
-
-asmlinkage long
-sys32_personality (unsigned int personality)
-{
- long ret;
-
- if (current->personality == PER_LINUX32 && personality == PER_LINUX)
- personality = PER_LINUX32;
- ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
- return ret;
-}
-
-asmlinkage unsigned long
-sys32_brk (unsigned int brk)
-{
- unsigned long ret, obrk;
- struct mm_struct *mm = current->mm;
-
- obrk = mm->brk;
- ret = sys_brk(brk);
- if (ret < obrk)
- clear_user(compat_ptr(ret), PAGE_ALIGN(ret) - ret);
- return ret;
-}
-
-/* Structure for ia32 emulation on ia64 */
-struct epoll_event32
-{
- u32 events;
- u32 data[2];
-};
-
-asmlinkage long
-sys32_epoll_ctl(int epfd, int op, int fd, struct epoll_event32 __user *event)
-{
- mm_segment_t old_fs = get_fs();
- struct epoll_event event64;
- int error;
- u32 data_halfword;
-
- if (!access_ok(VERIFY_READ, event, sizeof(struct epoll_event32)))
- return -EFAULT;
-
- __get_user(event64.events, &event->events);
- __get_user(data_halfword, &event->data[0]);
- event64.data = data_halfword;
- __get_user(data_halfword, &event->data[1]);
- event64.data |= (u64)data_halfword << 32;
-
- set_fs(KERNEL_DS);
- error = sys_epoll_ctl(epfd, op, fd, (struct epoll_event __user *) &event64);
- set_fs(old_fs);
-
- return error;
-}
-
-asmlinkage long
-sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents,
- int timeout)
-{
- struct epoll_event *events64 = NULL;
- mm_segment_t old_fs = get_fs();
- int numevents, size;
- int evt_idx;
- int do_free_pages = 0;
-
- if (maxevents <= 0) {
- return -EINVAL;
- }
-
- /* Verify that the area passed by the user is writeable */
- if (!access_ok(VERIFY_WRITE, events, maxevents * sizeof(struct epoll_event32)))
- return -EFAULT;
-
- /*
- * Allocate space for the intermediate copy. If the space needed
- * is large enough to cause kmalloc to fail, then try again with
- * __get_free_pages.
- */
- size = maxevents * sizeof(struct epoll_event);
- events64 = kmalloc(size, GFP_KERNEL);
- if (events64 == NULL) {
- events64 = (struct epoll_event *)
- __get_free_pages(GFP_KERNEL, get_order(size));
- if (events64 == NULL)
- return -ENOMEM;
- do_free_pages = 1;
- }
-
- /* Do the system call */
- set_fs(KERNEL_DS); /* copy_to/from_user should work on kernel mem*/
- numevents = sys_epoll_wait(epfd, (struct epoll_event __user *) events64,
- maxevents, timeout);
- set_fs(old_fs);
-
- /* Don't modify userspace memory if we're returning an error */
- if (numevents > 0) {
- /* Translate the 64-bit structures back into the 32-bit
- structures */
- for (evt_idx = 0; evt_idx < numevents; evt_idx++) {
- __put_user(events64[evt_idx].events,
- &events[evt_idx].events);
- __put_user((u32)events64[evt_idx].data,
- &events[evt_idx].data[0]);
- __put_user((u32)(events64[evt_idx].data >> 32),
- &events[evt_idx].data[1]);
- }
- }
-
- if (do_free_pages)
- free_pages((unsigned long) events64, get_order(size));
- else
- kfree(events64);
- return numevents;
-}
-
-/*
- * Get a yet unused TLS descriptor index.
- */
-static int
-get_free_idx (void)
-{
- struct thread_struct *t = ¤t->thread;
- int idx;
-
- for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
- if (desc_empty(t->tls_array + idx))
- return idx + GDT_ENTRY_TLS_MIN;
- return -ESRCH;
-}
-
-static void set_tls_desc(struct task_struct *p, int idx,
- const struct ia32_user_desc *info, int n)
-{
- struct thread_struct *t = &p->thread;
- struct desc_struct *desc = &t->tls_array[idx - GDT_ENTRY_TLS_MIN];
- int cpu;
-
- /*
- * We must not get preempted while modifying the TLS.
- */
- cpu = get_cpu();
-
- while (n-- > 0) {
- if (LDT_empty(info)) {
- desc->a = 0;
- desc->b = 0;
- } else {
- desc->a = LDT_entry_a(info);
- desc->b = LDT_entry_b(info);
- }
-
- ++info;
- ++desc;
- }
-
- if (t == ¤t->thread)
- load_TLS(t, cpu);
-
- put_cpu();
-}
-
-/*
- * Set a given TLS descriptor:
- */
-asmlinkage int
-sys32_set_thread_area (struct ia32_user_desc __user *u_info)
-{
- struct ia32_user_desc info;
- int idx;
-
- if (copy_from_user(&info, u_info, sizeof(info)))
- return -EFAULT;
- idx = info.entry_number;
-
- /*
- * index -1 means the kernel should try to find and allocate an empty descriptor:
- */
- if (idx == -1) {
- idx = get_free_idx();
- if (idx < 0)
- return idx;
- if (put_user(idx, &u_info->entry_number))
- return -EFAULT;
- }
-
- if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
- return -EINVAL;
-
- set_tls_desc(current, idx, &info, 1);
- return 0;
-}
-
-/*
- * Get the current Thread-Local Storage area:
- */
-
-#define GET_BASE(desc) ( \
- (((desc)->a >> 16) & 0x0000ffff) | \
- (((desc)->b << 16) & 0x00ff0000) | \
- ( (desc)->b & 0xff000000) )
-
-#define GET_LIMIT(desc) ( \
- ((desc)->a & 0x0ffff) | \
- ((desc)->b & 0xf0000) )
-
-#define GET_32BIT(desc) (((desc)->b >> 22) & 1)
-#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3)
-#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1)
-#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1)
-#define GET_PRESENT(desc) (((desc)->b >> 15) & 1)
-#define GET_USEABLE(desc) (((desc)->b >> 20) & 1)
-
-static void fill_user_desc(struct ia32_user_desc *info, int idx,
- const struct desc_struct *desc)
-{
- info->entry_number = idx;
- info->base_addr = GET_BASE(desc);
- info->limit = GET_LIMIT(desc);
- info->seg_32bit = GET_32BIT(desc);
- info->contents = GET_CONTENTS(desc);
- info->read_exec_only = !GET_WRITABLE(desc);
- info->limit_in_pages = GET_LIMIT_PAGES(desc);
- info->seg_not_present = !GET_PRESENT(desc);
- info->useable = GET_USEABLE(desc);
-}
-
-asmlinkage int
-sys32_get_thread_area (struct ia32_user_desc __user *u_info)
-{
- struct ia32_user_desc info;
- struct desc_struct *desc;
- int idx;
-
- if (get_user(idx, &u_info->entry_number))
- return -EFAULT;
- if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
- return -EINVAL;
-
- desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
- fill_user_desc(&info, idx, desc);
-
- if (copy_to_user(u_info, &info, sizeof(info)))
- return -EFAULT;
- return 0;
-}
-
-struct regset_get {
- void *kbuf;
- void __user *ubuf;
-};
-
-struct regset_set {
- const void *kbuf;
- const void __user *ubuf;
-};
-
-struct regset_getset {
- struct task_struct *target;
- const struct user_regset *regset;
- union {
- struct regset_get get;
- struct regset_set set;
- } u;
- unsigned int pos;
- unsigned int count;
- int ret;
-};
-
-static void getfpreg(struct task_struct *task, int regno, int *val)
-{
- switch (regno / sizeof(int)) {
- case 0:
- *val = task->thread.fcr & 0xffff;
- break;
- case 1:
- *val = task->thread.fsr & 0xffff;
- break;
- case 2:
- *val = (task->thread.fsr>>16) & 0xffff;
- break;
- case 3:
- *val = task->thread.fir;
- break;
- case 4:
- *val = (task->thread.fir>>32) & 0xffff;
- break;
- case 5:
- *val = task->thread.fdr;
- break;
- case 6:
- *val = (task->thread.fdr >> 32) & 0xffff;
- break;
- }
-}
-
-static void setfpreg(struct task_struct *task, int regno, int val)
-{
- switch (regno / sizeof(int)) {
- case 0:
- task->thread.fcr = (task->thread.fcr & (~0x1f3f))
- | (val & 0x1f3f);
- break;
- case 1:
- task->thread.fsr = (task->thread.fsr & (~0xffff)) | val;
- break;
- case 2:
- task->thread.fsr = (task->thread.fsr & (~0xffff0000))
- | (val << 16);
- break;
- case 3:
- task->thread.fir = (task->thread.fir & (~0xffffffff)) | val;
- break;
- case 5:
- task->thread.fdr = (task->thread.fdr & (~0xffffffff)) | val;
- break;
- }
-}
-
-static void access_fpreg_ia32(int regno, void *reg,
- struct pt_regs *pt, struct switch_stack *sw,
- int tos, int write)
-{
- void *f;
-
- if ((regno += tos) >= 8)
- regno -= 8;
- if (regno < 4)
- f = &pt->f8 + regno;
- else if (regno <= 7)
- f = &sw->f12 + (regno - 4);
- else {
- printk(KERN_ERR "regno must be less than 7 \n");
- return;
- }
-
- if (write)
- memcpy(f, reg, sizeof(struct _fpreg_ia32));
- else
- memcpy(reg, f, sizeof(struct _fpreg_ia32));
-}
-
-static void do_fpregs_get(struct unw_frame_info *info, void *arg)
-{
- struct regset_getset *dst = arg;
- struct task_struct *task = dst->target;
- struct pt_regs *pt;
- int start, end, tos;
- char buf[80];
-
- if (dst->count == 0 || unw_unwind_to_user(info) < 0)
- return;
- if (dst->pos < 7 * sizeof(int)) {
- end = min((dst->pos + dst->count),
- (unsigned int)(7 * sizeof(int)));
- for (start = dst->pos; start < end; start += sizeof(int))
- getfpreg(task, start, (int *)(buf + start));
- dst->ret = user_regset_copyout(&dst->pos, &dst->count,
- &dst->u.get.kbuf, &dst->u.get.ubuf, buf,
- 0, 7 * sizeof(int));
- if (dst->ret || dst->count == 0)
- return;
- }
- if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
- pt = task_pt_regs(task);
- tos = (task->thread.fsr >> 11) & 7;
- end = min(dst->pos + dst->count,
- (unsigned int)(sizeof(struct ia32_user_i387_struct)));
- start = (dst->pos - 7 * sizeof(int)) /
- sizeof(struct _fpreg_ia32);
- end = (end - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
- for (; start < end; start++)
- access_fpreg_ia32(start,
- (struct _fpreg_ia32 *)buf + start,
- pt, info->sw, tos, 0);
- dst->ret = user_regset_copyout(&dst->pos, &dst->count,
- &dst->u.get.kbuf, &dst->u.get.ubuf,
- buf, 7 * sizeof(int),
- sizeof(struct ia32_user_i387_struct));
- if (dst->ret || dst->count == 0)
- return;
- }
-}
-
-static void do_fpregs_set(struct unw_frame_info *info, void *arg)
-{
- struct regset_getset *dst = arg;
- struct task_struct *task = dst->target;
- struct pt_regs *pt;
- char buf[80];
- int end, start, tos;
-
- if (dst->count == 0 || unw_unwind_to_user(info) < 0)
- return;
-
- if (dst->pos < 7 * sizeof(int)) {
- start = dst->pos;
- dst->ret = user_regset_copyin(&dst->pos, &dst->count,
- &dst->u.set.kbuf, &dst->u.set.ubuf, buf,
- 0, 7 * sizeof(int));
- if (dst->ret)
- return;
- for (; start < dst->pos; start += sizeof(int))
- setfpreg(task, start, *((int *)(buf + start)));
- if (dst->count == 0)
- return;
- }
- if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
- start = (dst->pos - 7 * sizeof(int)) /
- sizeof(struct _fpreg_ia32);
- dst->ret = user_regset_copyin(&dst->pos, &dst->count,
- &dst->u.set.kbuf, &dst->u.set.ubuf,
- buf, 7 * sizeof(int),
- sizeof(struct ia32_user_i387_struct));
- if (dst->ret)
- return;
- pt = task_pt_regs(task);
- tos = (task->thread.fsr >> 11) & 7;
- end = (dst->pos - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
- for (; start < end; start++)
- access_fpreg_ia32(start,
- (struct _fpreg_ia32 *)buf + start,
- pt, info->sw, tos, 1);
- if (dst->count == 0)
- return;
- }
-}
-
-#define OFFSET(member) ((int)(offsetof(struct ia32_user_fxsr_struct, member)))
-static void getfpxreg(struct task_struct *task, int start, int end, char *buf)
-{
- int min_val;
-
- min_val = min(end, OFFSET(fop));
- while (start < min_val) {
- if (start == OFFSET(cwd))
- *((short *)buf) = task->thread.fcr & 0xffff;
- else if (start == OFFSET(swd))
- *((short *)buf) = task->thread.fsr & 0xffff;
- else if (start == OFFSET(twd))
- *((short *)buf) = (task->thread.fsr>>16) & 0xffff;
- buf += 2;
- start += 2;
- }
- /* skip fop element */
- if (start == OFFSET(fop)) {
- start += 2;
- buf += 2;
- }
- while (start < end) {
- if (start == OFFSET(fip))
- *((int *)buf) = task->thread.fir;
- else if (start == OFFSET(fcs))
- *((int *)buf) = (task->thread.fir>>32) & 0xffff;
- else if (start == OFFSET(foo))
- *((int *)buf) = task->thread.fdr;
- else if (start == OFFSET(fos))
- *((int *)buf) = (task->thread.fdr>>32) & 0xffff;
- else if (start == OFFSET(mxcsr))
- *((int *)buf) = ((task->thread.fcr>>32) & 0xff80)
- | ((task->thread.fsr>>32) & 0x3f);
- buf += 4;
- start += 4;
- }
-}
-
-static void setfpxreg(struct task_struct *task, int start, int end, char *buf)
-{
- int min_val, num32;
- short num;
- unsigned long num64;
-
- min_val = min(end, OFFSET(fop));
- while (start < min_val) {
- num = *((short *)buf);
- if (start == OFFSET(cwd)) {
- task->thread.fcr = (task->thread.fcr & (~0x1f3f))
- | (num & 0x1f3f);
- } else if (start == OFFSET(swd)) {
- task->thread.fsr = (task->thread.fsr & (~0xffff)) | num;
- } else if (start == OFFSET(twd)) {
- task->thread.fsr = (task->thread.fsr & (~0xffff0000))
- | (((int)num) << 16);
- }
- buf += 2;
- start += 2;
- }
- /* skip fop element */
- if (start == OFFSET(fop)) {
- start += 2;
- buf += 2;
- }
- while (start < end) {
- num32 = *((int *)buf);
- if (start == OFFSET(fip))
- task->thread.fir = (task->thread.fir & (~0xffffffff))
- | num32;
- else if (start == OFFSET(foo))
- task->thread.fdr = (task->thread.fdr & (~0xffffffff))
- | num32;
- else if (start == OFFSET(mxcsr)) {
- num64 = num32 & 0xff10;
- task->thread.fcr = (task->thread.fcr &
- (~0xff1000000000UL)) | (num64<<32);
- num64 = num32 & 0x3f;
- task->thread.fsr = (task->thread.fsr &
- (~0x3f00000000UL)) | (num64<<32);
- }
- buf += 4;
- start += 4;
- }
-}
-
-static void do_fpxregs_get(struct unw_frame_info *info, void *arg)
-{
- struct regset_getset *dst = arg;
- struct task_struct *task = dst->target;
- struct pt_regs *pt;
- char buf[128];
- int start, end, tos;
-
- if (dst->count == 0 || unw_unwind_to_user(info) < 0)
- return;
- if (dst->pos < OFFSET(st_space[0])) {
- end = min(dst->pos + dst->count, (unsigned int)32);
- getfpxreg(task, dst->pos, end, buf);
- dst->ret = user_regset_copyout(&dst->pos, &dst->count,
- &dst->u.get.kbuf, &dst->u.get.ubuf, buf,
- 0, OFFSET(st_space[0]));
- if (dst->ret || dst->count == 0)
- return;
- }
- if (dst->pos < OFFSET(xmm_space[0])) {
- pt = task_pt_regs(task);
- tos = (task->thread.fsr >> 11) & 7;
- end = min(dst->pos + dst->count,
- (unsigned int)OFFSET(xmm_space[0]));
- start = (dst->pos - OFFSET(st_space[0])) / 16;
- end = (end - OFFSET(st_space[0])) / 16;
- for (; start < end; start++)
- access_fpreg_ia32(start, buf + 16 * start, pt,
- info->sw, tos, 0);
- dst->ret = user_regset_copyout(&dst->pos, &dst->count,
- &dst->u.get.kbuf, &dst->u.get.ubuf,
- buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
- if (dst->ret || dst->count == 0)
- return;
- }
- if (dst->pos < OFFSET(padding[0]))
- dst->ret = user_regset_copyout(&dst->pos, &dst->count,
- &dst->u.get.kbuf, &dst->u.get.ubuf,
- &info->sw->f16, OFFSET(xmm_space[0]),
- OFFSET(padding[0]));
-}
-
-static void do_fpxregs_set(struct unw_frame_info *info, void *arg)
-{
- struct regset_getset *dst = arg;
- struct task_struct *task = dst->target;
- char buf[128];
- int start, end;
-
- if (dst->count == 0 || unw_unwind_to_user(info) < 0)
- return;
-
- if (dst->pos < OFFSET(st_space[0])) {
- start = dst->pos;
- dst->ret = user_regset_copyin(&dst->pos, &dst->count,
- &dst->u.set.kbuf, &dst->u.set.ubuf,
- buf, 0, OFFSET(st_space[0]));
- if (dst->ret)
- return;
- setfpxreg(task, start, dst->pos, buf);
- if (dst->count == 0)
- return;
- }
- if (dst->pos < OFFSET(xmm_space[0])) {
- struct pt_regs *pt;
- int tos;
- pt = task_pt_regs(task);
- tos = (task->thread.fsr >> 11) & 7;
- start = (dst->pos - OFFSET(st_space[0])) / 16;
- dst->ret = user_regset_copyin(&dst->pos, &dst->count,
- &dst->u.set.kbuf, &dst->u.set.ubuf,
- buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
- if (dst->ret)
- return;
- end = (dst->pos - OFFSET(st_space[0])) / 16;
- for (; start < end; start++)
- access_fpreg_ia32(start, buf + 16 * start, pt, info->sw,
- tos, 1);
- if (dst->count == 0)
- return;
- }
- if (dst->pos < OFFSET(padding[0]))
- dst->ret = user_regset_copyin(&dst->pos, &dst->count,
- &dst->u.set.kbuf, &dst->u.set.ubuf,
- &info->sw->f16, OFFSET(xmm_space[0]),
- OFFSET(padding[0]));
-}
-#undef OFFSET
-
-static int do_regset_call(void (*call)(struct unw_frame_info *, void *),
- struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- struct regset_getset info = { .target = target, .regset = regset,
- .pos = pos, .count = count,
- .u.set = { .kbuf = kbuf, .ubuf = ubuf },
- .ret = 0 };
-
- if (target == current)
- unw_init_running(call, &info);
- else {
- struct unw_frame_info ufi;
- memset(&ufi, 0, sizeof(ufi));
- unw_init_from_blocked_task(&ufi, target);
- (*call)(&ufi, &info);
- }
-
- return info.ret;
-}
-
-static int ia32_fpregs_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return do_regset_call(do_fpregs_get, target, regset, pos, count,
- kbuf, ubuf);
-}
-
-static int ia32_fpregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return do_regset_call(do_fpregs_set, target, regset, pos, count,
- kbuf, ubuf);
-}
-
-static int ia32_fpxregs_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return do_regset_call(do_fpxregs_get, target, regset, pos, count,
- kbuf, ubuf);
-}
-
-static int ia32_fpxregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return do_regset_call(do_fpxregs_set, target, regset, pos, count,
- kbuf, ubuf);
-}
-
-static int ia32_genregs_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- if (kbuf) {
- u32 *kp = kbuf;
- while (count > 0) {
- *kp++ = getreg(target, pos);
- pos += 4;
- count -= 4;
- }
- } else {
- u32 __user *up = ubuf;
- while (count > 0) {
- if (__put_user(getreg(target, pos), up++))
- return -EFAULT;
- pos += 4;
- count -= 4;
- }
- }
- return 0;
-}
-
-static int ia32_genregs_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret = 0;
-
- if (kbuf) {
- const u32 *kp = kbuf;
- while (!ret && count > 0) {
- putreg(target, pos, *kp++);
- pos += 4;
- count -= 4;
- }
- } else {
- const u32 __user *up = ubuf;
- u32 val;
- while (!ret && count > 0) {
- ret = __get_user(val, up++);
- if (!ret)
- putreg(target, pos, val);
- pos += 4;
- count -= 4;
- }
- }
- return ret;
-}
-
-static int ia32_tls_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- struct thread_struct *t = &target->thread;
- int n = GDT_ENTRY_TLS_ENTRIES;
- while (n > 0 && desc_empty(&t->tls_array[n -1]))
- --n;
- return n;
-}
-
-static int ia32_tls_get(struct task_struct *target,
- const struct user_regset *regset, unsigned int pos,
- unsigned int count, void *kbuf, void __user *ubuf)
-{
- const struct desc_struct *tls;
-
- if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
- (pos % sizeof(struct ia32_user_desc)) != 0 ||
- (count % sizeof(struct ia32_user_desc)) != 0)
- return -EINVAL;
-
- pos /= sizeof(struct ia32_user_desc);
- count /= sizeof(struct ia32_user_desc);
-
- tls = &target->thread.tls_array[pos];
-
- if (kbuf) {
- struct ia32_user_desc *info = kbuf;
- while (count-- > 0)
- fill_user_desc(info++, GDT_ENTRY_TLS_MIN + pos++,
- tls++);
- } else {
- struct ia32_user_desc __user *u_info = ubuf;
- while (count-- > 0) {
- struct ia32_user_desc info;
- fill_user_desc(&info, GDT_ENTRY_TLS_MIN + pos++, tls++);
- if (__copy_to_user(u_info++, &info, sizeof(info)))
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int ia32_tls_set(struct task_struct *target,
- const struct user_regset *regset, unsigned int pos,
- unsigned int count, const void *kbuf, const void __user *ubuf)
-{
- struct ia32_user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
- const struct ia32_user_desc *info;
-
- if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
- (pos % sizeof(struct ia32_user_desc)) != 0 ||
- (count % sizeof(struct ia32_user_desc)) != 0)
- return -EINVAL;
-
- if (kbuf)
- info = kbuf;
- else if (__copy_from_user(infobuf, ubuf, count))
- return -EFAULT;
- else
- info = infobuf;
-
- set_tls_desc(target,
- GDT_ENTRY_TLS_MIN + (pos / sizeof(struct ia32_user_desc)),
- info, count / sizeof(struct ia32_user_desc));
-
- return 0;
-}
-
-/*
- * This should match arch/i386/kernel/ptrace.c:native_regsets.
- * XXX ioperm? vm86?
- */
-static const struct user_regset ia32_regsets[] = {
- {
- .core_note_type = NT_PRSTATUS,
- .n = sizeof(struct user_regs_struct32)/4,
- .size = 4, .align = 4,
- .get = ia32_genregs_get, .set = ia32_genregs_set
- },
- {
- .core_note_type = NT_PRFPREG,
- .n = sizeof(struct ia32_user_i387_struct) / 4,
- .size = 4, .align = 4,
- .get = ia32_fpregs_get, .set = ia32_fpregs_set
- },
- {
- .core_note_type = NT_PRXFPREG,
- .n = sizeof(struct ia32_user_fxsr_struct) / 4,
- .size = 4, .align = 4,
- .get = ia32_fpxregs_get, .set = ia32_fpxregs_set
- },
- {
- .core_note_type = NT_386_TLS,
- .n = GDT_ENTRY_TLS_ENTRIES,
- .bias = GDT_ENTRY_TLS_MIN,
- .size = sizeof(struct ia32_user_desc),
- .align = sizeof(struct ia32_user_desc),
- .active = ia32_tls_active,
- .get = ia32_tls_get, .set = ia32_tls_set,
- },
-};
-
-const struct user_regset_view user_ia32_view = {
- .name = "i386", .e_machine = EM_386,
- .regsets = ia32_regsets, .n = ARRAY_SIZE(ia32_regsets)
-};
-
-long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high,
- __u32 len_low, __u32 len_high, int advice)
-{
- return sys_fadvise64_64(fd,
- (((u64)offset_high)<<32) | offset_low,
- (((u64)len_high)<<32) | len_low,
- advice);
-}
-
-#ifdef NOTYET /* UNTESTED FOR IA64 FROM HERE DOWN */
-
-asmlinkage long sys32_setreuid(compat_uid_t ruid, compat_uid_t euid)
-{
- uid_t sruid, seuid;
-
- sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
- seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
- return sys_setreuid(sruid, seuid);
-}
-
-asmlinkage long
-sys32_setresuid(compat_uid_t ruid, compat_uid_t euid,
- compat_uid_t suid)
-{
- uid_t sruid, seuid, ssuid;
-
- sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
- seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
- ssuid = (suid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)suid);
- return sys_setresuid(sruid, seuid, ssuid);
-}
-
-asmlinkage long
-sys32_setregid(compat_gid_t rgid, compat_gid_t egid)
-{
- gid_t srgid, segid;
-
- srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
- segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
- return sys_setregid(srgid, segid);
-}
-
-asmlinkage long
-sys32_setresgid(compat_gid_t rgid, compat_gid_t egid,
- compat_gid_t sgid)
-{
- gid_t srgid, segid, ssgid;
-
- srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
- segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
- ssgid = (sgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)sgid);
- return sys_setresgid(srgid, segid, ssgid);
-}
-#endif /* NOTYET */
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 93997bd..21adbd7 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -100,7 +100,32 @@
static inline void disable_acpi(void) { }
static inline void pci_acpi_crs_quirks(void) { }
+#ifdef CONFIG_IA64_GENERIC
const char *acpi_get_sysname (void);
+#else
+static inline const char *acpi_get_sysname (void)
+{
+# if defined (CONFIG_IA64_HP_SIM)
+ return "hpsim";
+# elif defined (CONFIG_IA64_HP_ZX1)
+ return "hpzx1";
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+ return "hpzx1_swiotlb";
+# elif defined (CONFIG_IA64_SGI_SN2)
+ return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+ return "uv";
+# elif defined (CONFIG_IA64_DIG)
+ return "dig";
+# elif defined (CONFIG_IA64_XEN_GUEST)
+ return "xen";
+# elif defined(CONFIG_IA64_DIG_VTD)
+ return "dig_vtd";
+# else
+# error Unknown platform. Fix acpi.c.
+# endif
+}
+#endif
int acpi_request_vector (u32 int_type);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
diff --git a/arch/ia64/include/asm/ia32.h b/arch/ia64/include/asm/ia32.h
deleted file mode 100644
index 2390ee1..0000000
--- a/arch/ia64/include/asm/ia32.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_IA64_IA32_H
-#define _ASM_IA64_IA32_H
-
-
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-
-#define IA32_NR_syscalls 285 /* length of syscall table */
-#define IA32_PAGE_SHIFT 12 /* 4KB pages */
-
-#ifndef __ASSEMBLY__
-
-# ifdef CONFIG_IA32_SUPPORT
-
-#define IA32_PAGE_OFFSET 0xc0000000
-
-extern void ia32_cpu_init (void);
-extern void ia32_mem_init (void);
-extern void ia32_gdt_init (void);
-extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
-extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
-extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
-
-# endif /* !CONFIG_IA32_SUPPORT */
-
-/* Declare this unconditionally, so we don't get warnings for unreachable code. */
-extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs);
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-extern int ia32_copy_ia64_partial_page_list(struct task_struct *,
- unsigned long);
-extern void ia32_drop_ia64_partial_page_list(struct task_struct *);
-#else
-# define ia32_copy_ia64_partial_page_list(a1, a2) 0
-# define ia32_drop_ia64_partial_page_list(a1) do { ; } while (0)
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_IA32_H */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 69bf138..c3286f4 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -462,7 +462,7 @@
return pte_val(a) == pte_val(b);
}
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init (void);
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
index 7fa90f7..348e44d 100644
--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -270,23 +270,6 @@
(int __user *) (addr)); \
})
-#ifdef CONFIG_IA32_SUPPORT
-struct desc_struct {
- unsigned int a, b;
-};
-
-#define desc_empty(desc) (!((desc)->a | (desc)->b))
-#define desc_equal(desc1, desc2) (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
-
-#define GDT_ENTRY_TLS_ENTRIES 3
-#define GDT_ENTRY_TLS_MIN 6
-#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
-
-#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
-
-struct ia64_partial_page_list;
-#endif
-
struct thread_struct {
__u32 flags; /* various thread flags (see IA64_THREAD_*) */
/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
@@ -298,29 +281,6 @@
__u64 rbs_bot; /* the base address for the RBS */
int last_fph_cpu; /* CPU that may hold the contents of f32-f127 */
-#ifdef CONFIG_IA32_SUPPORT
- __u64 eflag; /* IA32 EFLAGS reg */
- __u64 fsr; /* IA32 floating pt status reg */
- __u64 fcr; /* IA32 floating pt control reg */
- __u64 fir; /* IA32 fp except. instr. reg */
- __u64 fdr; /* IA32 fp except. data reg */
- __u64 old_k1; /* old value of ar.k1 */
- __u64 old_iob; /* old IOBase value */
- struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */
- /* cached TLS descriptors. */
- struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
-
-# define INIT_THREAD_IA32 .eflag = 0, \
- .fsr = 0, \
- .fcr = 0x17800000037fULL, \
- .fir = 0, \
- .fdr = 0, \
- .old_k1 = 0, \
- .old_iob = 0, \
- .ppl = NULL,
-#else
-# define INIT_THREAD_IA32
-#endif /* CONFIG_IA32_SUPPORT */
#ifdef CONFIG_PERFMON
void *pfm_context; /* pointer to detailed PMU context */
unsigned long pfm_needs_checking; /* when >0, pending perfmon work on kernel exit */
@@ -342,7 +302,6 @@
.rbs_bot = STACK_TOP - DEFAULT_USER_STACK_SIZE, \
.task_size = DEFAULT_TASK_SIZE, \
.last_fph_cpu = -1, \
- INIT_THREAD_IA32 \
INIT_THREAD_PM \
.dbr = {0, }, \
.ibr = {0, }, \
@@ -485,11 +444,6 @@
extern void ia64_save_debug_regs (unsigned long *save_area);
extern void ia64_load_debug_regs (unsigned long *save_area);
-#ifdef CONFIG_IA32_SUPPORT
-extern void ia32_save_state (struct task_struct *task);
-extern void ia32_load_state (struct task_struct *task);
-#endif
-
#define ia64_fph_enable() do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
#define ia64_fph_disable() do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index d6f5787..d8e9896 100644
--- a/arch/ia64/include/asm/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -2,25 +2,6 @@
#define _ASM_IA64_SCATTERLIST_H
/*
- * Modified 1998-1999, 2001-2002, 2004
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length; /* buffer length */
-
- dma_addr_t dma_address;
- unsigned int dma_length;
-};
-
-/*
* It used to be that ISA_DMA_THRESHOLD had something to do with the
* DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
* from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
@@ -30,9 +11,6 @@
*/
#define ISA_DMA_THRESHOLD 0xffffffff
-#define sg_dma_len(sg) ((sg)->dma_length)
-#define sg_dma_address(sg) ((sg)->dma_address)
-
-#define ARCH_HAS_SG_CHAIN
+#include <asm-generic/scatterlist.h>
#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h
index 2f758a4..a7ff1c6 100644
--- a/arch/ia64/include/asm/syscall.h
+++ b/arch/ia64/include/asm/syscall.h
@@ -22,33 +22,18 @@
if ((long)regs->cr_ifs < 0) /* Not a syscall */
return -1;
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs))
- return regs->r1;
-#endif
-
return regs->r15;
}
static inline void syscall_rollback(struct task_struct *task,
struct pt_regs *regs)
{
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs))
- regs->r8 = regs->r1;
-#endif
-
/* do nothing */
}
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs))
- return regs->r8;
-#endif
-
return regs->r10 == -1 ? regs->r8:0;
}
@@ -62,13 +47,6 @@
struct pt_regs *regs,
int error, long val)
{
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs)) {
- regs->r8 = (long) error ? error : val;
- return;
- }
-#endif
-
if (error) {
/* error < 0, but ia64 uses > 0 return value */
regs->r8 = -error;
@@ -89,37 +67,6 @@
{
BUG_ON(i + n > 6);
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs)) {
- switch (i + n) {
- case 6:
- if (!n--) break;
- *args++ = regs->r13;
- case 5:
- if (!n--) break;
- *args++ = regs->r15;
- case 4:
- if (!n--) break;
- *args++ = regs->r14;
- case 3:
- if (!n--) break;
- *args++ = regs->r10;
- case 2:
- if (!n--) break;
- *args++ = regs->r9;
- case 1:
- if (!n--) break;
- *args++ = regs->r11;
- case 0:
- if (!n--) break;
- default:
- BUG();
- break;
- }
-
- return;
- }
-#endif
ia64_syscall_get_set_arguments(task, regs, i, n, args, 0);
}
@@ -130,34 +77,6 @@
{
BUG_ON(i + n > 6);
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(regs)) {
- switch (i + n) {
- case 6:
- if (!n--) break;
- regs->r13 = *args++;
- case 5:
- if (!n--) break;
- regs->r15 = *args++;
- case 4:
- if (!n--) break;
- regs->r14 = *args++;
- case 3:
- if (!n--) break;
- regs->r10 = *args++;
- case 2:
- if (!n--) break;
- regs->r9 = *args++;
- case 1:
- if (!n--) break;
- regs->r11 = *args++;
- case 0:
- if (!n--) break;
- }
-
- return;
- }
-#endif
ia64_syscall_get_set_arguments(task, regs, i, n, args, 1);
}
#endif /* _ASM_SYSCALL_H */
diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h
index 927a381..9f342a5 100644
--- a/arch/ia64/include/asm/system.h
+++ b/arch/ia64/include/asm/system.h
@@ -191,15 +191,6 @@
#ifdef __KERNEL__
-#ifdef CONFIG_IA32_SUPPORT
-# define IS_IA32_PROCESS(regs) (ia64_psr(regs)->is != 0)
-#else
-# define IS_IA32_PROCESS(regs) 0
-struct task_struct;
-static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
-static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
-#endif
-
/*
* Context switch from one thread to another. If the two threads have
* different address spaces, schedule() has already taken care of
@@ -233,7 +224,7 @@
#define IA64_HAS_EXTRA_STATE(t) \
((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
- || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
+ || PERFMON_IS_SYSWIDE())
#define __switch_to(prev,next,last) do { \
IA64_ACCOUNT_ON_SWITCH(prev, next); \
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 10a8f21..bb8b0ff 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -335,20 +335,6 @@
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifdef CONFIG_IA32_SUPPORT
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_LLSEEK
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_PAUSE
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# define __ARCH_WANT_COMPAT_SYS_TIME
-#endif
-
#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
#include <linux/types.h>
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index e123634..4138282 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -8,15 +8,13 @@
extra-y := head.o init_task.o vmlinux.lds
-obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
+obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
irq_lsapic.o ivt.o machvec.o pal.o paravirt_patchlist.o patch.o process.o perfmon.o ptrace.o sal.o \
salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
unwind.o mca.o mca_asm.o topology.o dma-mapping.o
+obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o
obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o
-obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o
-obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o
-obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_IOSAPIC) += iosapic.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 40574ae..c16fb03 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -60,11 +60,6 @@
#define PREFIX "ACPI: "
-void (*pm_idle) (void);
-EXPORT_SYMBOL(pm_idle);
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
-
u32 acpi_rsdt_forced;
unsigned int acpi_cpei_override;
unsigned int acpi_cpei_phys_cpuid;
@@ -83,12 +78,10 @@
"v1.0/r0.71 tables no longer supported\n");
return rsdp_phys;
}
-#endif
const char __init *
acpi_get_sysname(void)
{
-#ifdef CONFIG_IA64_GENERIC
unsigned long rsdp_phys;
struct acpi_table_rsdp *rsdp;
struct acpi_table_xsdt *xsdt;
@@ -143,30 +136,8 @@
#endif
return "dig";
-#else
-# if defined (CONFIG_IA64_HP_SIM)
- return "hpsim";
-# elif defined (CONFIG_IA64_HP_ZX1)
- return "hpzx1";
-# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
- return "hpzx1_swiotlb";
-# elif defined (CONFIG_IA64_SGI_SN2)
- return "sn2";
-# elif defined (CONFIG_IA64_SGI_UV)
- return "uv";
-# elif defined (CONFIG_IA64_DIG)
- return "dig";
-# elif defined (CONFIG_IA64_XEN_GUEST)
- return "xen";
-# elif defined(CONFIG_IA64_DIG_VTD)
- return "dig_vtd";
-# else
-# error Unknown platform. Fix acpi.c.
-# endif
-#endif
}
-
-#ifdef CONFIG_ACPI
+#endif /* CONFIG_IA64_GENERIC */
#define ACPI_MAX_PLATFORM_INTERRUPTS 256
@@ -1060,5 +1031,3 @@
* do_suspend_lowlevel()
*/
void do_suspend_lowlevel(void) {}
-
-#endif /* CONFIG_ACPI */
diff --git a/arch/ia64/kernel/audit.c b/arch/ia64/kernel/audit.c
index f3802ae..96a9d18 100644
--- a/arch/ia64/kernel/audit.c
+++ b/arch/ia64/kernel/audit.c
@@ -30,20 +30,11 @@
int audit_classify_arch(int arch)
{
-#ifdef CONFIG_IA32_SUPPORT
- if (arch == AUDIT_ARCH_I386)
- return 1;
-#endif
return 0;
}
int audit_classify_syscall(int abi, unsigned syscall)
{
-#ifdef CONFIG_IA32_SUPPORT
- extern int ia32_classify_syscall(unsigned);
- if (abi == AUDIT_ARCH_I386)
- return ia32_classify_syscall(syscall);
-#endif
switch(syscall) {
case __NR_open:
return 2;
@@ -58,18 +49,6 @@
static int __init audit_classes_init(void)
{
-#ifdef CONFIG_IA32_SUPPORT
- extern __u32 ia32_dir_class[];
- extern __u32 ia32_write_class[];
- extern __u32 ia32_read_class[];
- extern __u32 ia32_chattr_class[];
- extern __u32 ia32_signal_class[];
- audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
- audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
- audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
- audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
- audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
-#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d75b872..9a260b3 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -71,15 +71,6 @@
add out3=16,sp // regs
br.call.sptk.many rp=sys_execve
.ret0:
-#ifdef CONFIG_IA32_SUPPORT
- /*
- * Check if we're returning to ia32 mode. If so, we need to restore ia32 registers
- * from pt_regs.
- */
- adds r16=PT(CR_IPSR)+16,sp
- ;;
- ld8 r16=[r16]
-#endif
cmp4.ge p6,p7=r8,r0
mov ar.pfs=loc1 // restore ar.pfs
sxt4 r8=r8 // return 64-bit result
@@ -108,12 +99,6 @@
ldf.fill f23=[sp]; ldf.fill f24=[sp]; mov f25=f0
ldf.fill f26=[sp]; ldf.fill f27=[sp]; mov f28=f0
ldf.fill f29=[sp]; ldf.fill f30=[sp]; mov f31=f0
-#ifdef CONFIG_IA32_SUPPORT
- tbit.nz p6,p0=r16, IA64_PSR_IS_BIT
- movl loc0=ia64_ret_from_ia32_execve
- ;;
-(p6) mov rp=loc0
-#endif
br.ret.sptk.many rp
END(ia64_execve)
@@ -848,30 +833,6 @@
br.cond.sptk.many rbs_switch // B
END(__paravirt_leave_syscall)
-#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
-#ifdef CONFIG_IA32_SUPPORT
-GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
- PT_REGS_UNWIND_INFO(0)
- adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8
- adds r3=PT(R10)+16,sp // r3 = &pt_regs.r10
- ;;
- .mem.offset 0,0
- st8.spill [r2]=r8 // store return value in slot for r8 and set unat bit
- .mem.offset 8,0
- st8.spill [r3]=r0 // clear error indication in slot for r10 and set unat bit
-#ifdef CONFIG_PARAVIRT
- ;;
- // don't fall through, ia64_leave_kernel may be #define'd
- br.cond.sptk.few ia64_leave_kernel
- ;;
-#endif /* CONFIG_PARAVIRT */
-END(ia64_ret_from_ia32_execve)
-#ifndef CONFIG_PARAVIRT
- // fall through
-#endif
-#endif /* CONFIG_IA32_SUPPORT */
-#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
-
GLOBAL_ENTRY(__paravirt_leave_kernel)
PT_REGS_UNWIND_INFO(0)
/*
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index ec9a5fd..179fd12 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -49,7 +49,6 @@
#include <asm/asmmacro.h>
#include <asm/break.h>
-#include <asm/ia32.h>
#include <asm/kregs.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable.h>
@@ -1386,28 +1385,6 @@
// 0x6a00 Entry 46 (size 16 bundles) IA-32 Intercept (30,31,59,70,71)
ENTRY(ia32_intercept)
DBG_FAULT(46)
-#ifdef CONFIG_IA32_SUPPORT
- mov r31=pr
- MOV_FROM_ISR(r16)
- ;;
- extr.u r17=r16,16,8 // get ISR.code
- mov r18=ar.eflag
- MOV_FROM_IIM(r19) // old eflag value
- ;;
- cmp.ne p6,p0=2,r17
-(p6) br.cond.spnt 1f // not a system flag fault
- xor r16=r18,r19
- ;;
- extr.u r17=r16,18,1 // get the eflags.ac bit
- ;;
- cmp.eq p6,p0=0,r17
-(p6) br.cond.spnt 1f // eflags.ac bit didn't change
- ;;
- mov pr=r31,-1 // restore predicate registers
- RFI
-
-1:
-#endif // CONFIG_IA32_SUPPORT
FAULT(46)
END(ia32_intercept)
@@ -1416,12 +1393,7 @@
// 0x6b00 Entry 47 (size 16 bundles) IA-32 Interrupt (74)
ENTRY(ia32_interrupt)
DBG_FAULT(47)
-#ifdef CONFIG_IA32_SUPPORT
- mov r31=pr
- br.sptk.many dispatch_to_ia32_handler
-#else
FAULT(47)
-#endif
END(ia32_interrupt)
.org ia64_ivt+0x6c00
@@ -1715,89 +1687,3 @@
(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
br.sptk.many ia64_leave_kernel
END(dispatch_illegal_op_fault)
-
-#ifdef CONFIG_IA32_SUPPORT
-
- /*
- * There is no particular reason for this code to be here, other than that
- * there happens to be space here that would go unused otherwise. If this
- * fault ever gets "unreserved", simply moved the following code to a more
- * suitable spot...
- */
-
- // IA32 interrupt entry point
-
-ENTRY(dispatch_to_ia32_handler)
- SAVE_MIN
- ;;
- MOV_FROM_ISR(r14)
- SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
- // guarantee that interruption collection is on
- ;;
- SSM_PSR_I(p15, p15, r3)
- adds r3=8,r2 // Base pointer for SAVE_REST
- ;;
- SAVE_REST
- ;;
- mov r15=0x80
- shr r14=r14,16 // Get interrupt number
- ;;
- cmp.ne p6,p0=r14,r15
-(p6) br.call.dpnt.many b6=non_ia32_syscall
-
- adds r14=IA64_PT_REGS_R8_OFFSET + 16,sp // 16 byte hole per SW conventions
- adds r15=IA64_PT_REGS_R1_OFFSET + 16,sp
- ;;
- cmp.eq pSys,pNonSys=r0,r0 // set pSys=1, pNonSys=0
- ld8 r8=[r14] // get r8
- ;;
- st8 [r15]=r8 // save original EAX in r1 (IA32 procs don't use the GP)
- ;;
- alloc r15=ar.pfs,0,0,6,0 // must first in an insn group
- ;;
- ld4 r8=[r14],8 // r8 == eax (syscall number)
- mov r15=IA32_NR_syscalls
- ;;
- cmp.ltu.unc p6,p7=r8,r15
- ld4 out1=[r14],8 // r9 == ecx
- ;;
- ld4 out2=[r14],8 // r10 == edx
- ;;
- ld4 out0=[r14] // r11 == ebx
- adds r14=(IA64_PT_REGS_R13_OFFSET) + 16,sp
- ;;
- ld4 out5=[r14],PT(R14)-PT(R13) // r13 == ebp
- ;;
- ld4 out3=[r14],PT(R15)-PT(R14) // r14 == esi
- adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
- ;;
- ld4 out4=[r14] // r15 == edi
- movl r16=ia32_syscall_table
- ;;
-(p6) shladd r16=r8,3,r16 // force ni_syscall if not valid syscall number
- ld4 r2=[r2] // r2 = current_thread_info()->flags
- ;;
- ld8 r16=[r16]
- and r2=_TIF_SYSCALL_TRACEAUDIT,r2 // mask trace or audit
- ;;
- mov b6=r16
- movl r15=ia32_ret_from_syscall
- cmp.eq p8,p0=r2,r0
- ;;
- mov rp=r15
-(p8) br.call.sptk.many b6=b6
- br.cond.sptk ia32_trace_syscall
-
-non_ia32_syscall:
- alloc r15=ar.pfs,0,0,2,0
- mov out0=r14 // interrupt #
- add out1=16,sp // pointer to pt_regs
- ;; // avoid WAW on CFM
- br.call.sptk.many rp=ia32_bad_interrupt
-.ret1: movl r15=ia64_leave_kernel
- ;;
- mov rp=r15
- br.ret.sptk.many rp
-END(dispatch_to_ia32_handler)
-
-#endif /* CONFIG_IA32_SUPPORT */
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 6bcbe21..b81e46b 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2713,7 +2713,7 @@
goto buffer_error;
}
- DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d \n",
+ DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d\n",
ctx,
ctx_flags,
ctx->ctx_fl_system,
@@ -3677,7 +3677,7 @@
* "self-monitoring".
*/
if (CTX_OVFL_NOBLOCK(ctx) == 0 && state == PFM_CTX_MASKED) {
- DPRINT(("unblocking [%d] \n", task_pid_nr(task)));
+ DPRINT(("unblocking [%d]\n", task_pid_nr(task)));
complete(&ctx->ctx_restart_done);
} else {
DPRINT(("[%d] armed exit trap\n", task_pid_nr(task)));
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 9bcec99..d92765c 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -33,7 +33,6 @@
#include <asm/cpu.h>
#include <asm/delay.h>
#include <asm/elf.h>
-#include <asm/ia32.h>
#include <asm/irq.h>
#include <asm/kexec.h>
#include <asm/pgalloc.h>
@@ -60,6 +59,10 @@
EXPORT_SYMBOL(idle_halt);
unsigned long idle_nomwait;
EXPORT_SYMBOL(idle_nomwait);
+void (*pm_idle) (void);
+EXPORT_SYMBOL(pm_idle);
+void (*pm_power_off) (void);
+EXPORT_SYMBOL(pm_power_off);
void
ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -358,11 +361,6 @@
if (info & PFM_CPUINFO_SYST_WIDE)
pfm_syst_wide_update_task(task, info, 0);
#endif
-
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(task_pt_regs(task)))
- ia32_save_state(task);
-#endif
}
void
@@ -383,11 +381,6 @@
if (info & PFM_CPUINFO_SYST_WIDE)
pfm_syst_wide_update_task(task, info, 1);
#endif
-
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(task_pt_regs(task)))
- ia32_load_state(task);
-#endif
}
/*
@@ -426,7 +419,7 @@
unsigned long user_stack_base, unsigned long user_stack_size,
struct task_struct *p, struct pt_regs *regs)
{
- extern char ia64_ret_from_clone, ia32_ret_from_clone;
+ extern char ia64_ret_from_clone;
struct switch_stack *child_stack, *stack;
unsigned long rbs, child_rbs, rbs_size;
struct pt_regs *child_ptregs;
@@ -457,7 +450,7 @@
memcpy((void *) child_rbs, (void *) rbs, rbs_size);
if (likely(user_mode(child_ptregs))) {
- if ((clone_flags & CLONE_SETTLS) && !IS_IA32_PROCESS(regs))
+ if (clone_flags & CLONE_SETTLS)
child_ptregs->r13 = regs->r16; /* see sys_clone2() in entry.S */
if (user_stack_base) {
child_ptregs->r12 = user_stack_base + user_stack_size - 16;
@@ -477,10 +470,7 @@
child_ptregs->r13 = (unsigned long) p; /* set `current' pointer */
}
child_stack->ar_bspstore = child_rbs + rbs_size;
- if (IS_IA32_PROCESS(regs))
- child_stack->b0 = (unsigned long) &ia32_ret_from_clone;
- else
- child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
+ child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
/* copy parts of thread_struct: */
p->thread.ksp = (unsigned long) child_stack - 16;
@@ -515,22 +505,6 @@
p->thread.flags = ((current->thread.flags & ~THREAD_FLAGS_TO_CLEAR)
| THREAD_FLAGS_TO_SET);
ia64_drop_fpu(p); /* don't pick up stale state from a CPU's fph */
-#ifdef CONFIG_IA32_SUPPORT
- /*
- * If we're cloning an IA32 task then save the IA32 extra
- * state from the current task to the new task
- */
- if (IS_IA32_PROCESS(task_pt_regs(current))) {
- ia32_save_state(p);
- if (clone_flags & CLONE_SETTLS)
- retval = ia32_clone_tls(p, child_ptregs);
-
- /* Copy partially mapped page list */
- if (!retval)
- retval = ia32_copy_ia64_partial_page_list(p,
- clone_flags);
- }
-#endif
#ifdef CONFIG_PERFMON
if (current->thread.pfm_context)
@@ -704,15 +678,6 @@
int
kernel_thread_helper (int (*fn)(void *), void *arg)
{
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(task_pt_regs(current))) {
- /* A kernel thread is always a 64-bit process. */
- current->thread.map_base = DEFAULT_MAP_BASE;
- current->thread.task_size = DEFAULT_TASK_SIZE;
- ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
- ia64_set_kr(IA64_KR_TSSD, current->thread.old_k1);
- }
-#endif
return (*fn)(arg);
}
@@ -725,14 +690,6 @@
/* drop floating-point and debug-register state if it exists: */
current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
ia64_drop_fpu(current);
-#ifdef CONFIG_IA32_SUPPORT
- if (IS_IA32_PROCESS(task_pt_regs(current))) {
- ia32_drop_ia64_partial_page_list(current);
- current->thread.task_size = IA32_PAGE_OFFSET;
- set_fs(USER_DS);
- memset(current->thread.tls_array, 0, sizeof(current->thread.tls_array));
- }
-#endif
}
/*
@@ -753,8 +710,6 @@
if (current->thread.flags & IA64_THREAD_DBG_VALID)
pfm_release_debug_registers(current);
#endif
- if (IS_IA32_PROCESS(task_pt_regs(current)))
- ia32_drop_ia64_partial_page_list(current);
}
unsigned long
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 9daa87f..b61afbb 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -1250,13 +1250,8 @@
long syscall;
int arch;
- if (IS_IA32_PROCESS(®s)) {
- syscall = regs.r1;
- arch = AUDIT_ARCH_I386;
- } else {
- syscall = regs.r15;
- arch = AUDIT_ARCH_IA64;
- }
+ syscall = regs.r15;
+ arch = AUDIT_ARCH_IA64;
audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
}
@@ -2172,11 +2167,6 @@
const struct user_regset_view *task_user_regset_view(struct task_struct *tsk)
{
-#ifdef CONFIG_IA32_SUPPORT
- extern const struct user_regset_view user_ia32_view;
- if (IS_IA32_PROCESS(task_pt_regs(tsk)))
- return &user_ia32_view;
-#endif
return &user_ia64_view;
}
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index a1ea879..41ae6a5 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -46,7 +46,6 @@
#include <linux/kexec.h>
#include <linux/crash_dump.h>
-#include <asm/ia32.h>
#include <asm/machvec.h>
#include <asm/mca.h>
#include <asm/meminit.h>
@@ -1016,10 +1015,6 @@
ia64_mmu_init(ia64_imva(cpu_data));
ia64_mca_cpu_init(ia64_imva(cpu_data));
-#ifdef CONFIG_IA32_SUPPORT
- ia32_cpu_init();
-#endif
-
/* Clear ITC to eliminate sched_clock() overflows in human time. */
ia64_set_itc(0);
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index e1821ca..7bdafc8 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -21,7 +21,6 @@
#include <linux/unistd.h>
#include <linux/wait.h>
-#include <asm/ia32.h>
#include <asm/intrinsics.h>
#include <asm/uaccess.h>
#include <asm/rse.h>
@@ -425,14 +424,8 @@
handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset,
struct sigscratch *scr)
{
- if (IS_IA32_PROCESS(&scr->pt)) {
- /* send signal to IA-32 process */
- if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt))
- return 0;
- } else
- /* send signal to IA-64 process */
- if (!setup_frame(sig, ka, info, oldset, scr))
- return 0;
+ if (!setup_frame(sig, ka, info, oldset, scr))
+ return 0;
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
@@ -462,7 +455,6 @@
siginfo_t info;
long restart = in_syscall;
long errno = scr->pt.r8;
-# define ERR_CODE(c) (IS_IA32_PROCESS(&scr->pt) ? -(c) : (c))
/*
* In the ia64_leave_kernel code path, we want the common case to go fast, which
@@ -490,14 +482,7 @@
* inferior call), thus it's important to check for restarting _after_
* get_signal_to_deliver().
*/
- if (IS_IA32_PROCESS(&scr->pt)) {
- if (in_syscall) {
- if (errno >= 0)
- restart = 0;
- else
- errno = -errno;
- }
- } else if ((long) scr->pt.r10 != -1)
+ if ((long) scr->pt.r10 != -1)
/*
* A system calls has to be restarted only if one of the error codes
* ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10
@@ -513,22 +498,18 @@
switch (errno) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
- scr->pt.r8 = ERR_CODE(EINTR);
+ scr->pt.r8 = EINTR;
/* note: scr->pt.r10 is already -1 */
break;
case ERESTARTSYS:
if ((ka.sa.sa_flags & SA_RESTART) == 0) {
- scr->pt.r8 = ERR_CODE(EINTR);
+ scr->pt.r8 = EINTR;
/* note: scr->pt.r10 is already -1 */
break;
}
case ERESTARTNOINTR:
- if (IS_IA32_PROCESS(&scr->pt)) {
- scr->pt.r8 = scr->pt.r1;
- scr->pt.cr_iip -= 2;
- } else
- ia64_decrement_ip(&scr->pt);
+ ia64_decrement_ip(&scr->pt);
restart = 0; /* don't restart twice if handle_signal() fails... */
}
}
@@ -555,21 +536,14 @@
if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
|| errno == ERESTART_RESTARTBLOCK)
{
- if (IS_IA32_PROCESS(&scr->pt)) {
- scr->pt.r8 = scr->pt.r1;
- scr->pt.cr_iip -= 2;
- if (errno == ERESTART_RESTARTBLOCK)
- scr->pt.r8 = 0; /* x86 version of __NR_restart_syscall */
- } else {
- /*
- * Note: the syscall number is in r15 which is saved in
- * pt_regs so all we need to do here is adjust ip so that
- * the "break" instruction gets re-executed.
- */
- ia64_decrement_ip(&scr->pt);
- if (errno == ERESTART_RESTARTBLOCK)
- scr->pt.r15 = __NR_restart_syscall;
- }
+ /*
+ * Note: the syscall number is in r15 which is saved in
+ * pt_regs so all we need to do here is adjust ip so that
+ * the "break" instruction gets re-executed.
+ */
+ ia64_decrement_ip(&scr->pt);
+ if (errno == ERESTART_RESTARTBLOCK)
+ scr->pt.r15 = __NR_restart_syscall;
}
}
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index de100aa..e5230b2 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -44,7 +44,6 @@
#include <asm/cache.h>
#include <asm/current.h>
#include <asm/delay.h>
-#include <asm/ia32.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/machvec.h>
@@ -443,10 +442,6 @@
calibrate_delay();
local_cpu_data->loops_per_jiffy = loops_per_jiffy;
-#ifdef CONFIG_IA32_SUPPORT
- ia32_gdt_init();
-#endif
-
/*
* Allow the master to continue.
*/
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index a35c661..47a1927 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -61,7 +61,7 @@
#ifdef CONFIG_PARAVIRT
static void
-paravirt_clocksource_resume(void)
+paravirt_clocksource_resume(struct clocksource *cs)
{
if (pv_time_ops.clocksource_resume)
pv_time_ops.clocksource_resume();
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index f0cda76..fd80e70 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -19,7 +19,6 @@
#include <linux/kdebug.h>
#include <asm/fpswa.h>
-#include <asm/ia32.h>
#include <asm/intrinsics.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
@@ -626,10 +625,6 @@
break;
case 45:
-#ifdef CONFIG_IA32_SUPPORT
- if (ia32_exception(®s, isr) == 0)
- return;
-#endif
printk(KERN_ERR "Unexpected IA-32 exception (Trap 45)\n");
printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx\n",
iip, ifa, isr);
@@ -637,10 +632,6 @@
break;
case 46:
-#ifdef CONFIG_IA32_SUPPORT
- if (ia32_intercept(®s, isr) == 0)
- return;
-#endif
printk(KERN_ERR "Unexpected IA-32 intercept trap (Trap 46)\n");
printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx, iim - 0x%lx\n",
iip, ifa, isr, iim);
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 7c0d481..ca3335e 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -22,7 +22,6 @@
#include <linux/kexec.h>
#include <asm/dma.h>
-#include <asm/ia32.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/numa.h>
@@ -668,10 +667,6 @@
fsyscall_table[i] = sys_call_table[i] | 1;
}
setup_gate();
-
-#ifdef CONFIG_IA32_SUPPORT
- ia32_mem_init();
-#endif
}
#ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
index 7a5ae63..f149065 100644
--- a/arch/ia64/uv/kernel/setup.c
+++ b/arch/ia64/uv/kernel/setup.c
@@ -104,7 +104,7 @@
uv_cpu_hub_info(cpu)->lowmem_remap_top =
lowmem_redir_base + lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
- uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = n_val;
uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S
index e32dae4..08847aa 100644
--- a/arch/ia64/xen/hypercall.S
+++ b/arch/ia64/xen/hypercall.S
@@ -58,11 +58,6 @@
__HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR)
__HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR)
-#ifdef CONFIG_IA32_SUPPORT
-__HCALL0(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
-__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG) // refer SDM vol1 3.1.8
-#endif /* CONFIG_IA32_SUPPORT */
-
GLOBAL_ENTRY(xen_set_rr0_to_rr4)
mov r8=r32
mov r9=r33
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
index 5e2270a..8adc6a1 100644
--- a/arch/ia64/xen/xen_pv_ops.c
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -301,11 +301,6 @@
case _IA64_REG_AR_KR0 ... _IA64_REG_AR_KR7:
xen_set_kr(regnum - _IA64_REG_AR_KR0, val);
break;
-#ifdef CONFIG_IA32_SUPPORT
- case _IA64_REG_AR_EFLAG:
- xen_set_eflag(val);
- break;
-#endif
case _IA64_REG_AR_ITC:
xen_set_itc(val);
break;
@@ -332,11 +327,6 @@
case _IA64_REG_PSR:
res = xen_get_psr();
break;
-#ifdef CONFIG_IA32_SUPPORT
- case _IA64_REG_AR_EFLAG:
- res = xen_get_eflag();
- break;
-#endif
case _IA64_REG_AR_ITC:
res = xen_get_itc();
break;
@@ -710,9 +700,6 @@
__DEFINE_FUNC(getreg,
__DEFINE_GET_REG(PSR, PSR)
-#ifdef CONFIG_IA32_SUPPORT
- __DEFINE_GET_REG(AR_EFLAG, EFLAG)
-#endif
/* get_itc */
"mov r2 = " __stringify(_IA64_REG_AR_ITC) "\n"
@@ -789,9 +776,6 @@
";;\n"
"(p6) br.cond.spnt xen_set_itc\n"
-#ifdef CONFIG_IA32_SUPPORT
- __DEFINE_SET_REG(AR_EFLAG, SET_EFLAG)
-#endif
__DEFINE_SET_REG(CR_TPR, SET_TPR)
__DEFINE_SET_REG(CR_EOI, EOI)
diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
index 0ef9530..92614b0 100644
--- a/arch/m32r/include/asm/tlbflush.h
+++ b/arch/m32r/include/asm/tlbflush.h
@@ -92,6 +92,6 @@
);
}
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
#endif /* _ASM_M32R_TLBFLUSH_H */
diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c
index 8846917..888aab1 100644
--- a/arch/m32r/mm/fault-nommu.c
+++ b/arch/m32r/mm/fault-nommu.c
@@ -95,7 +95,7 @@
* update_mmu_cache()
*======================================================================*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
- pte_t pte)
+ pte_t *ptep)
{
BUG();
}
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 7274b47..28ee389 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -336,7 +336,7 @@
addr = (address & PAGE_MASK);
set_thread_fault_code(error_code);
- update_mmu_cache(NULL, addr, *pte_k);
+ update_mmu_cache(NULL, addr, pte_k);
set_thread_fault_code(0);
return;
}
@@ -349,7 +349,7 @@
#define ITLB_END (unsigned long *)(ITLB_BASE + (NR_TLB_ENTRIES * 8))
#define DTLB_END (unsigned long *)(DTLB_BASE + (NR_TLB_ENTRIES * 8))
void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
- pte_t pte)
+ pte_t *ptep)
{
volatile unsigned long *entry1, *entry2;
unsigned long pte_data, flags;
@@ -365,7 +365,7 @@
vaddr = (vaddr & PAGE_MASK) | get_asid();
- pte_data = pte_val(pte);
+ pte_data = pte_val(*ptep);
#ifdef CONFIG_CHIP_OPSP
entry1 = (unsigned long *)ITLB_BASE;
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index aca0e28..87174c9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -115,7 +115,7 @@
* they are updated on demand.
*/
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index eb31a0e..10ec70c 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -38,7 +38,7 @@
#define flush_tlb_kernel_range(start, end) do { } while (0)
-#define update_mmu_cache(vma, addr, pte) do { } while (0)
+#define update_mmu_cache(vma, addr, ptep) do { } while (0)
#define flush_tlb_all local_flush_tlb_all
#define flush_tlb_mm local_flush_tlb_mm
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 93598ba..7e40f37 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -368,8 +368,9 @@
pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 6dc30fc..16d8857 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -466,7 +466,7 @@
* the kernel page tables containing the necessary information by tlb-mn10300.S
*/
extern void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
index 31c9d27..36ba021 100644
--- a/arch/mn10300/mm/mmu-context.c
+++ b/arch/mn10300/mm/mmu-context.c
@@ -51,9 +51,10 @@
/*
* preemptively set a TLB entry
*/
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
unsigned long pteu, ptel, cnx, flags;
+ pte_t pte = *ptep;
addr &= PAGE_MASK;
ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index a27d2e2..01c1503 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -410,7 +410,7 @@
#define PG_dcache_dirty PG_arch_1
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index b6ed34d..1054baa 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -68,9 +68,9 @@
EXPORT_SYMBOL(flush_cache_all_local);
void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
- struct page *page = pte_page(pte);
+ struct page *page = pte_page(*ptep);
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 21207e5..89f1587 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -209,7 +209,7 @@
* corresponding HPTE into the hash table ahead of time, instead of
* waiting for the inevitable extra hash-table miss exception.
*/
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index b9b1525..311224c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -494,13 +494,13 @@
* This must always be called with the pte lock held.
*/
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+ pte_t *ptep)
{
#ifdef CONFIG_PPC_STD_MMU
unsigned long access = 0, trap;
/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
- if (!pte_young(pte) || address >= TASK_SIZE)
+ if (!pte_young(*ptep) || address >= TASK_SIZE)
return;
/* We try to figure out if we are coming from an instruction
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index e2fa79c..9b5b918 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -43,7 +43,7 @@
* The S390 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/*
* ZERO_PAGE is a global shared page that is always zero: used
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 674934b..ccf38f0 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -272,8 +272,9 @@
unsigned long address, pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_tlb(vma, address, pte);
__update_cache(vma, address, pte);
}
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index aab7652..02f7745 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -153,8 +153,9 @@
unsigned long address, pte_t pte);
static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
+ pte_t pte = *ptep;
__update_cache(vma, address, pte);
__update_tlb(vma, address, pte);
}
diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h
new file mode 100644
index 0000000..57565a3
--- /dev/null
+++ b/arch/sh/include/asm/siu.h
@@ -0,0 +1,26 @@
+/*
+ * platform header for the SIU ASoC driver
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_SIU_H
+#define ASM_SIU_H
+
+#include <asm/dma-sh.h>
+
+struct device;
+
+struct siu_platform {
+ struct device *dma_dev;
+ enum sh_dmae_slave_chan_id dma_slave_tx_a;
+ enum sh_dmae_slave_chan_id dma_slave_rx_a;
+ enum sh_dmae_slave_chan_id dma_slave_tx_b;
+ enum sh_dmae_slave_chan_id dma_slave_rx_b;
+};
+
+#endif /* ASM_SIU_H */
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 28e2283..8bf79e3 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -374,7 +374,7 @@
local_flush_tlb_one(get_asid(), address & PAGE_MASK);
#endif
- update_mmu_cache(NULL, address, entry);
+ update_mmu_cache(NULL, address, pte);
return 0;
}
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index e0cabe7..77f906d 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -330,9 +330,9 @@
#define FAULT_CODE_WRITE 0x2
#define FAULT_CODE_USER 0x4
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t *)
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+#define update_mmu_cache(vma,addr,ptep) BTFIXUP_CALL(update_mmu_cache)(vma,addr,ptep)
BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
unsigned long, unsigned int)
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index f3cb790..f5b5fa7 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -706,7 +706,7 @@
#define mmu_unlockarea(vaddr, len) do { } while(0)
struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
index e580f55..d112025 100644
--- a/arch/sparc/include/asm/scatterlist.h
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -1,27 +1,8 @@
#ifndef _SPARC_SCATTERLIST_H
#define _SPARC_SCATTERLIST_H
-#include <asm/page.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
-
- unsigned int length;
-
- dma_addr_t dma_address;
- __u32 dma_length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
#define sg_dma_len(sg) ((sg)->dma_length)
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#define ARCH_HAS_SG_CHAIN
+#include <asm-generic/scatterlist.h>
#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b062de9..62dc7a0 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -143,6 +143,4 @@
if (ARCH_SUN4C)
sun4c_probe_memerr_reg();
-
- return;
}
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 87f1760..0409d62 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -124,7 +124,7 @@
if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
(1<<LEON3_GPTIMER_SEPIRQ))) {
- prom_printf("irq timer not configured with seperate irqs \n");
+ prom_printf("irq timer not configured with separate irqs\n");
BUG();
}
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 05c0dad..8578757 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -177,7 +177,7 @@
int nrcpu = leon_smp_nrcpus();
int me = smp_processor_id();
- printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x \n", (unsigned int)me,
+ printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x\n", (unsigned int)me,
(unsigned int)nrcpu, (unsigned int)NR_CPUS,
(unsigned int)&(leon3_irqctrl_regs->mpstatus));
@@ -226,7 +226,7 @@
break;
udelay(200);
}
- printk(KERN_INFO "Started CPU %d \n", (unsigned int)i);
+ printk(KERN_INFO "Started CPU %d\n", (unsigned int)i);
if (!(cpu_callin_map[i])) {
printk(KERN_ERR "Processor %d is stuck.\n", i);
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 37b66c6..5ac539a 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1095,3 +1095,78 @@
return 0;
}
subsys_initcall(pcibios_init);
+
+#ifdef CONFIG_SYSFS
+static void __devinit pci_bus_slot_names(struct device_node *node,
+ struct pci_bus *bus)
+{
+ const struct pci_slot_names {
+ u32 slot_mask;
+ char names[0];
+ } *prop;
+ const char *sp;
+ int len, i;
+ u32 mask;
+
+ prop = of_get_property(node, "slot-names", &len);
+ if (!prop)
+ return;
+
+ mask = prop->slot_mask;
+ sp = prop->names;
+
+ if (ofpci_verbose)
+ printk("PCI: Making slots for [%s] mask[0x%02x]\n",
+ node->full_name, mask);
+
+ i = 0;
+ while (mask) {
+ struct pci_slot *pci_slot;
+ u32 this_bit = 1 << i;
+
+ if (!(mask & this_bit)) {
+ i++;
+ continue;
+ }
+
+ if (ofpci_verbose)
+ printk("PCI: Making slot [%s]\n", sp);
+
+ pci_slot = pci_create_slot(bus, i, sp, NULL);
+ if (IS_ERR(pci_slot))
+ printk(KERN_ERR "PCI: pci_create_slot returned %ld\n",
+ PTR_ERR(pci_slot));
+
+ sp += strlen(sp) + 1;
+ mask &= ~this_bit;
+ i++;
+ }
+}
+
+static int __init of_pci_slot_init(void)
+{
+ struct pci_bus *pbus = NULL;
+
+ while ((pbus = pci_find_next_bus(pbus)) != NULL) {
+ struct device_node *node;
+
+ if (pbus->self) {
+ struct dev_archdata *sd = pbus->self->sysdata;
+
+ /* PCI->PCI bridge */
+ node = sd->prom_node;
+ } else {
+ struct pci_pbm_info *pbm = pbus->sysdata;
+
+ /* Host PCI controller */
+ node = pbm->op->node;
+ }
+
+ pci_bus_slot_names(node, pbus);
+ }
+
+ return 0;
+}
+
+module_init(of_pci_slot_init);
+#endif
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 75e88c00..d36a8d3 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -585,8 +585,6 @@
writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO);
}
}
-
- return;
}
/*
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 9be2af5..b22ce61 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -95,8 +95,6 @@
"nop\n\t"
"nop\n\t" : : "r" (prom_tbr));
local_irq_restore(flags);
-
- return;
}
static unsigned int boot_flags __initdata = 0;
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 68791ca..482f2ab 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -194,7 +194,7 @@
smp_penguin_ctable.reg_size = 0;
/* whirrr, whirrr, whirrrrrrrrr... */
- SMP_PRINTK(("Starting CPU %d at %p \n", i, entry));
+ SMP_PRINTK(("Starting CPU %d at %p\n", i, entry));
local_flush_cache_all();
prom_startcpu(cpu_node,
&smp_penguin_ctable, 0, (char *)entry);
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index 378ca82..ebce430 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -21,6 +21,7 @@
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/perf_event.h>
+#include <linux/ratelimit.h>
#include <asm/fpumacro.h>
enum direction {
@@ -274,13 +275,9 @@
static void log_unaligned(struct pt_regs *regs)
{
- static unsigned long count, last_time;
+ static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
- if (time_after(jiffies, last_time + 5 * HZ))
- count = 0;
- if (count < 5) {
- last_time = jiffies;
- count++;
+ if (__ratelimit(&ratelimit)) {
printk("Kernel unaligned access at TPC[%lx] %pS\n",
regs->tpc, (void *) regs->tpc);
}
@@ -636,7 +633,6 @@
return;
}
advance(regs);
- return;
}
void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr)
@@ -685,5 +681,4 @@
return;
}
advance(regs);
- return;
}
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index a3413ac..bd86016 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -35,6 +35,8 @@
extern int prom_node_root;
+int show_unhandled_signals = 1;
+
/* At boot time we determine these two values necessary for setting
* up the segment maps and page table entries (pte's).
*/
@@ -149,6 +151,45 @@
return 0;
}
+static inline void
+show_signal_msg(struct pt_regs *regs, int sig, int code,
+ unsigned long address, struct task_struct *tsk)
+{
+ if (!unhandled_signal(tsk, sig))
+ return;
+
+ if (!printk_ratelimit())
+ return;
+
+ printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+ task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+ tsk->comm, task_pid_nr(tsk), address,
+ (void *)regs->pc, (void *)regs->u_regs[UREG_I7],
+ (void *)regs->u_regs[UREG_FP], code);
+
+ print_vma_addr(KERN_CONT " in ", regs->pc);
+
+ printk(KERN_CONT "\n");
+}
+
+static void __do_fault_siginfo(int code, int sig, struct pt_regs *regs,
+ unsigned long addr)
+{
+ siginfo_t info;
+
+ info.si_signo = sig;
+ info.si_code = code;
+ info.si_errno = 0;
+ info.si_addr = (void __user *) addr;
+ info.si_trapno = 0;
+
+ if (unlikely(show_unhandled_signals))
+ show_signal_msg(regs, sig, info.si_code,
+ addr, current);
+
+ force_sig_info (sig, &info, current);
+}
+
extern unsigned long safe_compute_effective_address(struct pt_regs *,
unsigned int);
@@ -168,6 +209,14 @@
return safe_compute_effective_address(regs, insn);
}
+static noinline void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
+ int text_fault)
+{
+ unsigned long addr = compute_si_addr(regs, text_fault);
+
+ __do_fault_siginfo(code, sig, regs, addr);
+}
+
asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
unsigned long address)
{
@@ -176,9 +225,8 @@
struct mm_struct *mm = tsk->mm;
unsigned int fixup;
unsigned long g2;
- siginfo_t info;
int from_user = !(regs->psr & PSR_PS);
- int fault;
+ int fault, code;
if(text_fault)
address = regs->pc;
@@ -195,7 +243,7 @@
if (!ARCH_SUN4C && address >= TASK_SIZE)
goto vmalloc_fault;
- info.si_code = SEGV_MAPERR;
+ code = SEGV_MAPERR;
/*
* If we're in an interrupt or have no user
@@ -229,7 +277,7 @@
* we can handle it..
*/
good_area:
- info.si_code = SEGV_ACCERR;
+ code = SEGV_ACCERR;
if(write) {
if(!(vma->vm_flags & VM_WRITE))
goto bad_area;
@@ -273,18 +321,8 @@
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
- if(from_user) {
-#if 0
- printk("Fault whee %s [%d]: segfaults at %08lx pc=%08lx\n",
- tsk->comm, tsk->pid, address, regs->pc);
-#endif
- info.si_signo = SIGSEGV;
- info.si_errno = 0;
- /* info.si_code set above to make clear whether
- this was a SEGV_MAPERR or SEGV_ACCERR fault. */
- info.si_addr = (void __user *)compute_si_addr(regs, text_fault);
- info.si_trapno = 0;
- force_sig_info (SIGSEGV, &info, tsk);
+ if (from_user) {
+ do_fault_siginfo(code, SIGSEGV, regs, text_fault);
return;
}
@@ -335,12 +373,7 @@
do_sigbus:
up_read(&mm->mmap_sem);
- info.si_signo = SIGBUS;
- info.si_errno = 0;
- info.si_code = BUS_ADRERR;
- info.si_addr = (void __user *) compute_si_addr(regs, text_fault);
- info.si_trapno = 0;
- force_sig_info (SIGBUS, &info, tsk);
+ do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, text_fault);
if (!from_user)
goto no_context;
@@ -378,7 +411,7 @@
unsigned long address)
{
extern void sun4c_update_mmu_cache(struct vm_area_struct *,
- unsigned long,pte_t);
+ unsigned long,pte_t *);
extern pte_t *sun4c_pte_offset_kernel(pmd_t *,unsigned long);
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
@@ -455,7 +488,7 @@
* on the CPU and doing a shrink_mmap() on this vma.
*/
sun4c_update_mmu_cache (find_vma(current->mm, address), address,
- *ptep);
+ ptep);
else
do_sparc_fault(regs, text_fault, write, address);
}
@@ -466,14 +499,10 @@
struct vm_area_struct *vma;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
- siginfo_t info;
+ int code;
- info.si_code = SEGV_MAPERR;
+ code = SEGV_MAPERR;
-#if 0
- printk("wf<pid=%d,wr=%d,addr=%08lx>\n",
- tsk->pid, write, address);
-#endif
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if(!vma)
@@ -485,7 +514,7 @@
if(expand_stack(vma, address))
goto bad_area;
good_area:
- info.si_code = SEGV_ACCERR;
+ code = SEGV_ACCERR;
if(write) {
if(!(vma->vm_flags & VM_WRITE))
goto bad_area;
@@ -502,27 +531,12 @@
return;
bad_area:
up_read(&mm->mmap_sem);
-#if 0
- printk("Window whee %s [%d]: segfaults at %08lx\n",
- tsk->comm, tsk->pid, address);
-#endif
- info.si_signo = SIGSEGV;
- info.si_errno = 0;
- /* info.si_code set above to make clear whether
- this was a SEGV_MAPERR or SEGV_ACCERR fault. */
- info.si_addr = (void __user *) address;
- info.si_trapno = 0;
- force_sig_info (SIGSEGV, &info, tsk);
+ __do_fault_siginfo(code, SIGSEGV, tsk->thread.kregs, address);
return;
do_sigbus:
up_read(&mm->mmap_sem);
- info.si_signo = SIGBUS;
- info.si_errno = 0;
- info.si_code = BUS_ADRERR;
- info.si_addr = (void __user *) address;
- info.si_trapno = 0;
- force_sig_info (SIGBUS, &info, tsk);
+ __do_fault_siginfo(BUS_ADRERR, SIGBUS, tsk->thread.kregs, address);
}
void window_overflow_fault(void)
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index b9d4ff0..f92ce56 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -32,6 +32,8 @@
#include <asm/sections.h>
#include <asm/mmu_context.h>
+int show_unhandled_signals = 1;
+
static inline __kprobes int notify_page_fault(struct pt_regs *regs)
{
int ret = 0;
@@ -128,22 +130,48 @@
return insn;
}
+static inline void
+show_signal_msg(struct pt_regs *regs, int sig, int code,
+ unsigned long address, struct task_struct *tsk)
+{
+ if (!unhandled_signal(tsk, sig))
+ return;
+
+ if (!printk_ratelimit())
+ return;
+
+ printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+ task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+ tsk->comm, task_pid_nr(tsk), address,
+ (void *)regs->tpc, (void *)regs->u_regs[UREG_I7],
+ (void *)regs->u_regs[UREG_FP], code);
+
+ print_vma_addr(KERN_CONT " in ", regs->tpc);
+
+ printk(KERN_CONT "\n");
+}
+
extern unsigned long compute_effective_address(struct pt_regs *, unsigned int, unsigned int);
static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
unsigned int insn, int fault_code)
{
+ unsigned long addr;
siginfo_t info;
info.si_code = code;
info.si_signo = sig;
info.si_errno = 0;
if (fault_code & FAULT_CODE_ITLB)
- info.si_addr = (void __user *) regs->tpc;
+ addr = regs->tpc;
else
- info.si_addr = (void __user *)
- compute_effective_address(regs, insn, 0);
+ addr = compute_effective_address(regs, insn, 0);
+ info.si_addr = (void __user *) addr;
info.si_trapno = 0;
+
+ if (unlikely(show_unhandled_signals))
+ show_signal_msg(regs, sig, code, addr, current);
+
force_sig_info(sig, &info, current);
}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1886d37..9245a82 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -289,12 +289,13 @@
}
}
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
struct mm_struct *mm;
struct tsb *tsb;
unsigned long tag, flags;
unsigned long tsb_index, tsb_hash_shift;
+ pte_t pte = *ptep;
if (tlb_type != hypervisor) {
unsigned long pfn = pte_pfn(pte);
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index 196263f..4e62c27 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -62,7 +62,7 @@
return NULL;
}
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
}
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 367321a..df49b20 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -694,7 +694,7 @@
* The following code is a deadwood that may be necessary when
* we start to make precise page flushes again. --zaitcev
*/
-static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte)
+static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t *ptep)
{
#if 0
static unsigned long last;
@@ -703,10 +703,10 @@
if (address == last) {
val = srmmu_hwprobe(address);
- if (val != 0 && pte_val(pte) != val) {
+ if (val != 0 && pte_val(*ptep) != val) {
printk("swift_update_mmu_cache: "
"addr %lx put %08x probed %08x from %p\n",
- address, pte_val(pte), val,
+ address, pte_val(*ptep), val,
__builtin_return_address(0));
srmmu_flush_whole_tlb();
}
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a89baf0..1865253 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -1887,7 +1887,7 @@
/* An experiment, turn off by default for now... -DaveM */
#define SUN4C_PRELOAD_PSEG
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
{
unsigned long flags;
int pseg;
@@ -1929,7 +1929,7 @@
start += PAGE_SIZE;
}
#ifndef SUN4C_PRELOAD_PSEG
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
#endif
local_irq_restore(flags);
return;
@@ -1940,7 +1940,7 @@
add_lru(entry);
}
- sun4c_put_pte(address, pte_val(pte));
+ sun4c_put_pte(address, pte_val(*ptep));
local_irq_restore(flags);
}
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index b3075d7..5340264 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -94,5 +94,4 @@
prom_putchar(char c)
{
while(prom_nbputchar(c) == -1) ;
- return;
}
diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c
index e1c3fc8..f55d58a 100644
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@@ -62,7 +62,6 @@
prom_putchar(char c)
{
prom_nbputchar(c);
- return;
}
void
diff --git a/arch/sparc/prom/devmap.c b/arch/sparc/prom/devmap.c
index 1e51791..46157d2 100644
--- a/arch/sparc/prom/devmap.c
+++ b/arch/sparc/prom/devmap.c
@@ -50,5 +50,4 @@
(*(romvec->pv_v2devops.v2_dumb_munmap))(vaddr, num_bytes);
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
- return;
}
diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c
index 9f1a95c..9c5d468 100644
--- a/arch/sparc/prom/devops_32.c
+++ b/arch/sparc/prom/devops_32.c
@@ -84,6 +84,4 @@
};
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
-
- return;
}
diff --git a/arch/sparc/prom/init_32.c b/arch/sparc/prom/init_32.c
index 6193c33..ccb36c7 100644
--- a/arch/sparc/prom/init_32.c
+++ b/arch/sparc/prom/init_32.c
@@ -75,5 +75,4 @@
romvec->pv_romvers, prom_rev);
/* Initialization successful. */
- return;
}
diff --git a/arch/sparc/prom/palloc.c b/arch/sparc/prom/palloc.c
index 20be339..2e2a88b 100644
--- a/arch/sparc/prom/palloc.c
+++ b/arch/sparc/prom/palloc.c
@@ -40,5 +40,4 @@
{
if((prom_vers == PROM_V0) || (num_bytes == 0x0)) return;
(*(romvec->pv_v2devops.v2_dumb_mem_free))(vaddr, num_bytes);
- return;
}
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index cd57908..aeff43e 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -87,8 +87,6 @@
if(num_obio_ranges)
prom_printf("PROMLIB: obio_ranges %d\n", num_obio_ranges);
-
- return;
}
void
diff --git a/arch/sparc/prom/segment.c b/arch/sparc/prom/segment.c
index 04fd03a..86a663f 100644
--- a/arch/sparc/prom/segment.c
+++ b/arch/sparc/prom/segment.c
@@ -25,5 +25,4 @@
(*(romvec->pv_setctxt))(ctx, (char *) vaddr, segment);
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
- return;
}
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 646d244..b21592f 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -173,7 +173,6 @@
len = prom_getproperty(node, prop, user_buf, ubuf_size);
if(len != -1) return;
user_buf[0] = 0;
- return;
}
EXPORT_SYMBOL(prom_getstring);
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 8ea73dd..3c0d2dd 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -154,7 +154,6 @@
len = prom_getproperty(node, prop, user_buf, ubuf_size);
if(len != -1) return;
user_buf[0] = 0;
- return;
}
EXPORT_SYMBOL(prom_getstring);
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5ff5546..c1ff690 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -747,7 +747,7 @@
ubd_dev->fd = fd;
if(ubd_dev->cow.file != NULL){
- blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
+ blk_queue_max_hw_sectors(ubd_dev->queue, 8 * sizeof(long));
err = -ENOMEM;
ubd_dev->cow.bitmap = vmalloc(ubd_dev->cow.bitmap_len);
@@ -849,7 +849,7 @@
}
ubd_dev->queue->queuedata = ubd_dev;
- blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
+ blk_queue_max_segments(ubd_dev->queue, MAX_SG);
err = ubd_disk_register(UBD_MAJOR, ubd_dev->size, n, &ubd_gendisk[n]);
if(err){
*error_out = "Failed to register device";
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 9ce3f16..a9f7251 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -345,7 +345,7 @@
struct mm_struct;
extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
-#define update_mmu_cache(vma,address,pte) do ; while (0)
+#define update_mmu_cache(vma,address,ptep) do ; while (0)
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 4) & 0x3f)
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 01fd946..a286683 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -80,7 +80,7 @@
* The i386 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
#endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c57a301..181be52 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -129,7 +129,7 @@
#define pte_unmap(pte) /* NOP */
#define pte_unmap_nested(pte) /* NOP */
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 6e44519..d360b56 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -806,7 +806,7 @@
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
unsigned int index)
{
- acpi_integer control;
+ u64 control;
if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
return;
@@ -824,7 +824,7 @@
{
struct cpufreq_frequency_table *powernow_table;
int ret_val = -ENODEV;
- acpi_integer control, status;
+ u64 control, status;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
@@ -948,7 +948,7 @@
u32 fid;
u32 vid;
u32 freq, index;
- acpi_integer status, control;
+ u64 status, control;
if (data->exttype) {
status = data->acpi_data.states[i].status;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad80a1c..ee4fa1b 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -266,7 +266,7 @@
force_hpet_resume();
}
-static void hpet_resume_counter(void)
+static void hpet_resume_counter(struct clocksource *cs)
{
hpet_resume_device();
hpet_restart_counter();
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 23066ec..208a857 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -740,7 +740,7 @@
}
#endif
-static void resume_tsc(void)
+static void resume_tsc(struct clocksource *cs)
{
clocksource_tsc.cycle_last = 0;
}
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index a138770..76bf355 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -394,7 +394,7 @@
#define kern_addr_valid(addr) (1)
extern void update_mmu_cache(struct vm_area_struct * vma,
- unsigned long address, pte_t pte);
+ unsigned long address, pte_t *ptep);
/*
* remap a physical page `pfn' of size `size' with page protection `prot'
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 3ba990c..85df465 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -147,9 +147,9 @@
#endif
void
-update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte)
+update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
{
- unsigned long pfn = pte_pfn(pte);
+ unsigned long pfn = pte_pfn(*ptep);
struct page *page;
if (!pfn_valid(pfn))
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index e7dbbaf..c85d74c 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -23,20 +23,6 @@
struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT };
EXPORT_SYMBOL_GPL(blkio_root_cgroup);
-bool blkiocg_css_tryget(struct blkio_cgroup *blkcg)
-{
- if (!css_tryget(&blkcg->css))
- return false;
- return true;
-}
-EXPORT_SYMBOL_GPL(blkiocg_css_tryget);
-
-void blkiocg_css_put(struct blkio_cgroup *blkcg)
-{
- css_put(&blkcg->css);
-}
-EXPORT_SYMBOL_GPL(blkiocg_css_put);
-
struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup)
{
return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id),
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index 4d316df..84bf745 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -43,9 +43,6 @@
unsigned long sectors;
};
-extern bool blkiocg_css_tryget(struct blkio_cgroup *blkcg);
-extern void blkiocg_css_put(struct blkio_cgroup *blkcg);
-
typedef void (blkio_unlink_group_fn) (void *key, struct blkio_group *blkg);
typedef void (blkio_update_group_weight_fn) (struct blkio_group *blkg,
unsigned int weight);
diff --git a/block/blk-core.c b/block/blk-core.c
index d1a9a0a..9fe174d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1490,9 +1490,9 @@
/*
* We only want one ->make_request_fn to be active at a time,
* else stack usage with stacked devices could be a problem.
- * So use current->bio_{list,tail} to keep a list of requests
+ * So use current->bio_list to keep a list of requests
* submited by a make_request_fn function.
- * current->bio_tail is also used as a flag to say if
+ * current->bio_list is also used as a flag to say if
* generic_make_request is currently active in this task or not.
* If it is NULL, then no make_request is active. If it is non-NULL,
* then a make_request is active, and new requests should be added
@@ -1500,11 +1500,11 @@
*/
void generic_make_request(struct bio *bio)
{
- if (current->bio_tail) {
+ struct bio_list bio_list_on_stack;
+
+ if (current->bio_list) {
/* make_request is active */
- *(current->bio_tail) = bio;
- bio->bi_next = NULL;
- current->bio_tail = &bio->bi_next;
+ bio_list_add(current->bio_list, bio);
return;
}
/* following loop may be a bit non-obvious, and so deserves some
@@ -1512,30 +1512,27 @@
* Before entering the loop, bio->bi_next is NULL (as all callers
* ensure that) so we have a list with a single bio.
* We pretend that we have just taken it off a longer list, so
- * we assign bio_list to the next (which is NULL) and bio_tail
- * to &bio_list, thus initialising the bio_list of new bios to be
+ * we assign bio_list to a pointer to the bio_list_on_stack,
+ * thus initialising the bio_list of new bios to be
* added. __generic_make_request may indeed add some more bios
* through a recursive call to generic_make_request. If it
* did, we find a non-NULL value in bio_list and re-enter the loop
* from the top. In this case we really did just take the bio
- * of the top of the list (no pretending) and so fixup bio_list and
- * bio_tail or bi_next, and call into __generic_make_request again.
+ * of the top of the list (no pretending) and so remove it from
+ * bio_list, and call into __generic_make_request again.
*
* The loop was structured like this to make only one call to
* __generic_make_request (which is important as it is large and
* inlined) and to keep the structure simple.
*/
BUG_ON(bio->bi_next);
+ bio_list_init(&bio_list_on_stack);
+ current->bio_list = &bio_list_on_stack;
do {
- current->bio_list = bio->bi_next;
- if (bio->bi_next == NULL)
- current->bio_tail = ¤t->bio_list;
- else
- bio->bi_next = NULL;
__generic_make_request(bio);
- bio = current->bio_list;
+ bio = bio_list_pop(current->bio_list);
} while (bio);
- current->bio_tail = NULL; /* deactivate */
+ current->bio_list = NULL; /* deactivate */
}
EXPORT_SYMBOL(generic_make_request);
@@ -1617,8 +1614,7 @@
* limitation.
*/
blk_recalc_rq_segments(rq);
- if (rq->nr_phys_segments > queue_max_phys_segments(q) ||
- rq->nr_phys_segments > queue_max_hw_segments(q)) {
+ if (rq->nr_phys_segments > queue_max_segments(q)) {
printk(KERN_ERR "%s: over max segments limit.\n", __func__);
return -EIO;
}
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 98e6bf6..3f65c8a 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -91,7 +91,7 @@
spin_lock_init(&ret->lock);
ret->ioprio_changed = 0;
ret->ioprio = 0;
- ret->last_waited = jiffies; /* doesn't matter... */
+ ret->last_waited = 0; /* doesn't matter... */
ret->nr_batch_requests = 0; /* because this is 0 */
INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
INIT_HLIST_HEAD(&ret->cic_list);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 99cb5cf..5e7dc99 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -206,8 +206,7 @@
{
int nr_phys_segs = bio_phys_segments(q, bio);
- if (req->nr_phys_segments + nr_phys_segs > queue_max_hw_segments(q) ||
- req->nr_phys_segments + nr_phys_segs > queue_max_phys_segments(q)) {
+ if (req->nr_phys_segments + nr_phys_segs > queue_max_segments(q)) {
req->cmd_flags |= REQ_NOMERGE;
if (req == q->last_merge)
q->last_merge = NULL;
@@ -300,10 +299,7 @@
total_phys_segments--;
}
- if (total_phys_segments > queue_max_phys_segments(q))
- return 0;
-
- if (total_phys_segments > queue_max_hw_segments(q))
+ if (total_phys_segments > queue_max_segments(q))
return 0;
/* Merge is OK... */
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 5eeb9e0..31e7a93 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -91,10 +91,9 @@
*/
void blk_set_default_limits(struct queue_limits *lim)
{
- lim->max_phys_segments = MAX_PHYS_SEGMENTS;
- lim->max_hw_segments = MAX_HW_SEGMENTS;
+ lim->max_segments = BLK_MAX_SEGMENTS;
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
- lim->max_segment_size = MAX_SEGMENT_SIZE;
+ lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
lim->max_sectors = BLK_DEF_MAX_SECTORS;
lim->max_hw_sectors = INT_MAX;
lim->max_discard_sectors = 0;
@@ -154,7 +153,7 @@
q->unplug_timer.data = (unsigned long)q;
blk_set_default_limits(&q->limits);
- blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
+ blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
/*
* If the caller didn't supply a lock, fall back to our embedded
@@ -210,37 +209,32 @@
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
- * blk_queue_max_sectors - set max sectors for a request for this queue
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
* @q: the request queue for the device
- * @max_sectors: max sectors in the usual 512b unit
+ * @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
- * Enables a low level driver to set an upper limit on the size of
- * received requests.
+ * Enables a low level driver to set a hard upper limit,
+ * max_hw_sectors, on the size of requests. max_hw_sectors is set by
+ * the device driver based upon the combined capabilities of I/O
+ * controller and storage device.
+ *
+ * max_sectors is a soft limit imposed by the block layer for
+ * filesystem type requests. This value can be overridden on a
+ * per-device basis in /sys/block/<device>/queue/max_sectors_kb.
+ * The soft limit can not exceed max_hw_sectors.
**/
-void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors)
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
- if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
- max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
+ if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
+ max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
printk(KERN_INFO "%s: set to minimum %d\n",
- __func__, max_sectors);
+ __func__, max_hw_sectors);
}
- if (BLK_DEF_MAX_SECTORS > max_sectors)
- q->limits.max_hw_sectors = q->limits.max_sectors = max_sectors;
- else {
- q->limits.max_sectors = BLK_DEF_MAX_SECTORS;
- q->limits.max_hw_sectors = max_sectors;
- }
-}
-EXPORT_SYMBOL(blk_queue_max_sectors);
-
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors)
-{
- if (BLK_DEF_MAX_SECTORS > max_sectors)
- q->limits.max_hw_sectors = BLK_DEF_MAX_SECTORS;
- else
- q->limits.max_hw_sectors = max_sectors;
+ q->limits.max_hw_sectors = max_hw_sectors;
+ q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
+ BLK_DEF_MAX_SECTORS);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
@@ -257,17 +251,15 @@
EXPORT_SYMBOL(blk_queue_max_discard_sectors);
/**
- * blk_queue_max_phys_segments - set max phys segments for a request for this queue
+ * blk_queue_max_segments - set max hw segments for a request for this queue
* @q: the request queue for the device
* @max_segments: max number of segments
*
* Description:
* Enables a low level driver to set an upper limit on the number of
- * physical data segments in a request. This would be the largest sized
- * scatter list the driver could handle.
+ * hw data segments in a request.
**/
-void blk_queue_max_phys_segments(struct request_queue *q,
- unsigned short max_segments)
+void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
{
if (!max_segments) {
max_segments = 1;
@@ -275,33 +267,9 @@
__func__, max_segments);
}
- q->limits.max_phys_segments = max_segments;
+ q->limits.max_segments = max_segments;
}
-EXPORT_SYMBOL(blk_queue_max_phys_segments);
-
-/**
- * blk_queue_max_hw_segments - set max hw segments for a request for this queue
- * @q: the request queue for the device
- * @max_segments: max number of segments
- *
- * Description:
- * Enables a low level driver to set an upper limit on the number of
- * hw data segments in a request. This would be the largest number of
- * address/length pairs the host adapter can actually give at once
- * to the device.
- **/
-void blk_queue_max_hw_segments(struct request_queue *q,
- unsigned short max_segments)
-{
- if (!max_segments) {
- max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n",
- __func__, max_segments);
- }
-
- q->limits.max_hw_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_hw_segments);
+EXPORT_SYMBOL(blk_queue_max_segments);
/**
* blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
@@ -507,7 +475,7 @@
* blk_stack_limits - adjust queue_limits for stacked devices
* @t: the stacking driver limits (top device)
* @b: the underlying queue limits (bottom, component device)
- * @offset: offset to beginning of data within component device
+ * @start: first data sector within component device
*
* Description:
* This function is used by stacking drivers like MD and DM to ensure
@@ -525,10 +493,9 @@
* the alignment_offset is undefined.
*/
int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
- sector_t offset)
+ sector_t start)
{
- sector_t alignment;
- unsigned int top, bottom, ret = 0;
+ unsigned int top, bottom, alignment, ret = 0;
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
@@ -537,18 +504,14 @@
t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
b->seg_boundary_mask);
- t->max_phys_segments = min_not_zero(t->max_phys_segments,
- b->max_phys_segments);
-
- t->max_hw_segments = min_not_zero(t->max_hw_segments,
- b->max_hw_segments);
+ t->max_segments = min_not_zero(t->max_segments, b->max_segments);
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
t->misaligned |= b->misaligned;
- alignment = queue_limit_alignment_offset(b, offset);
+ alignment = queue_limit_alignment_offset(b, start);
/* Bottom device has different alignment. Check that it is
* compatible with the current top alignment.
@@ -611,11 +574,7 @@
/* Discard alignment and granularity */
if (b->discard_granularity) {
- unsigned int granularity = b->discard_granularity;
- offset &= granularity - 1;
-
- alignment = (granularity + b->discard_alignment - offset)
- & (granularity - 1);
+ alignment = queue_limit_discard_alignment(b, start);
if (t->discard_granularity != 0 &&
t->discard_alignment != alignment) {
@@ -657,7 +616,7 @@
start += get_start_sect(bdev);
- return blk_stack_limits(t, &bq->limits, start << 9);
+ return blk_stack_limits(t, &bq->limits, start);
}
EXPORT_SYMBOL(bdev_stack_limits);
@@ -668,9 +627,8 @@
* @offset: offset to beginning of data within component device
*
* Description:
- * Merges the limits for two queues. Returns 0 if alignment
- * didn't change. Returns -1 if adding the bottom device caused
- * misalignment.
+ * Merges the limits for a top level gendisk and a bottom level
+ * block_device.
*/
void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset)
@@ -678,9 +636,7 @@
struct request_queue *t = disk->queue;
struct request_queue *b = bdev_get_queue(bdev);
- offset += get_start_sect(bdev) << 9;
-
- if (blk_stack_limits(&t->limits, &b->limits, offset) < 0) {
+ if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
disk_name(disk, 0, top);
@@ -752,22 +708,19 @@
* does is adjust the queue so that the buf is always appended
* silently to the scatterlist.
*
- * Note: This routine adjusts max_hw_segments to make room for
- * appending the drain buffer. If you call
- * blk_queue_max_hw_segments() or blk_queue_max_phys_segments() after
- * calling this routine, you must set the limit to one fewer than your
- * device can support otherwise there won't be room for the drain
- * buffer.
+ * Note: This routine adjusts max_hw_segments to make room for appending
+ * the drain buffer. If you call blk_queue_max_segments() after calling
+ * this routine, you must set the limit to one fewer than your device
+ * can support otherwise there won't be room for the drain buffer.
*/
int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size)
{
- if (queue_max_hw_segments(q) < 2 || queue_max_phys_segments(q) < 2)
+ if (queue_max_segments(q) < 2)
return -EINVAL;
/* make room for appending the drain */
- blk_queue_max_hw_segments(q, queue_max_hw_segments(q) - 1);
- blk_queue_max_phys_segments(q, queue_max_phys_segments(q) - 1);
+ blk_queue_max_segments(q, queue_max_segments(q) - 1);
q->dma_drain_needed = dma_drain_needed;
q->dma_drain_buffer = buf;
q->dma_drain_size = size;
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 8606c95..e854424 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -189,7 +189,8 @@
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
- return queue_var_show(blk_queue_nomerges(q), page);
+ return queue_var_show((blk_queue_nomerges(q) << 1) |
+ blk_queue_noxmerges(q), page);
}
static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
@@ -199,10 +200,12 @@
ssize_t ret = queue_var_store(&nm, page, count);
spin_lock_irq(q->queue_lock);
- if (nm)
+ queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ queue_flag_clear(QUEUE_FLAG_NOXMERGES, q);
+ if (nm == 2)
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
- else
- queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ else if (nm)
+ queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
spin_unlock_irq(q->queue_lock);
return ret;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 023f4e6..dee9d93 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -19,7 +19,7 @@
* tunables
*/
/* max queue in one round of service */
-static const int cfq_quantum = 4;
+static const int cfq_quantum = 8;
static const int cfq_fifo_expire[2] = { HZ / 4, HZ / 8 };
/* maximum backwards seek, in KiB */
static const int cfq_back_max = 16 * 1024;
@@ -46,8 +46,9 @@
#define CFQ_HW_QUEUE_MIN (5)
#define CFQ_SERVICE_SHIFT 12
-#define CFQQ_SEEK_THR 8 * 1024
-#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR)
+#define CFQQ_SEEK_THR (sector_t)(8 * 100)
+#define CFQQ_SECT_THR_NONROT (sector_t)(2 * 32)
+#define CFQQ_SEEKY(cfqq) (hweight32(cfqq->seek_history) > 32/8)
#define RQ_CIC(rq) \
((struct cfq_io_context *) (rq)->elevator_private)
@@ -77,11 +78,12 @@
struct rb_root rb;
struct rb_node *left;
unsigned count;
+ unsigned total_weight;
u64 min_vdisktime;
struct rb_node *active;
- unsigned total_weight;
};
-#define CFQ_RB_ROOT (struct cfq_rb_root) { RB_ROOT, NULL, 0, 0, }
+#define CFQ_RB_ROOT (struct cfq_rb_root) { .rb = RB_ROOT, .left = NULL, \
+ .count = 0, .min_vdisktime = 0, }
/*
* Per process-grouping structure
@@ -115,11 +117,11 @@
/* time when queue got scheduled in to dispatch first request. */
unsigned long dispatch_start;
unsigned int allocated_slice;
+ unsigned int slice_dispatch;
/* time when first request from queue completed and slice started. */
unsigned long slice_start;
unsigned long slice_end;
long slice_resid;
- unsigned int slice_dispatch;
/* pending metadata requests */
int meta_pending;
@@ -130,13 +132,11 @@
unsigned short ioprio, org_ioprio;
unsigned short ioprio_class, org_ioprio_class;
- unsigned int seek_samples;
- u64 seek_total;
- sector_t seek_mean;
- sector_t last_request_pos;
-
pid_t pid;
+ u32 seek_history;
+ sector_t last_request_pos;
+
struct cfq_rb_root *service_tree;
struct cfq_queue *new_cfqq;
struct cfq_group *cfqg;
@@ -223,8 +223,8 @@
unsigned int busy_queues;
- int rq_in_driver[2];
- int sync_flight;
+ int rq_in_driver;
+ int rq_in_flight[2];
/*
* queue-depth detection
@@ -417,11 +417,6 @@
static struct cfq_io_context *cfq_cic_lookup(struct cfq_data *,
struct io_context *);
-static inline int rq_in_driver(struct cfq_data *cfqd)
-{
- return cfqd->rq_in_driver[0] + cfqd->rq_in_driver[1];
-}
-
static inline struct cfq_queue *cic_to_cfqq(struct cfq_io_context *cic,
bool is_sync)
{
@@ -951,10 +946,6 @@
struct backing_dev_info *bdi = &cfqd->queue->backing_dev_info;
unsigned int major, minor;
- /* Do we need to take this reference */
- if (!blkiocg_css_tryget(blkcg))
- return NULL;;
-
cfqg = cfqg_of_blkg(blkiocg_lookup_group(blkcg, key));
if (cfqg || !create)
goto done;
@@ -985,7 +976,6 @@
hlist_add_head(&cfqg->cfqd_node, &cfqd->cfqg_list);
done:
- blkiocg_css_put(blkcg);
return cfqg;
}
@@ -1420,9 +1410,9 @@
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- cfqd->rq_in_driver[rq_is_sync(rq)]++;
+ cfqd->rq_in_driver++;
cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d",
- rq_in_driver(cfqd));
+ cfqd->rq_in_driver);
cfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
}
@@ -1430,12 +1420,11 @@
static void cfq_deactivate_request(struct request_queue *q, struct request *rq)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- const int sync = rq_is_sync(rq);
- WARN_ON(!cfqd->rq_in_driver[sync]);
- cfqd->rq_in_driver[sync]--;
+ WARN_ON(!cfqd->rq_in_driver);
+ cfqd->rq_in_driver--;
cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "deactivate rq, drv=%d",
- rq_in_driver(cfqd));
+ cfqd->rq_in_driver);
}
static void cfq_remove_request(struct request *rq)
@@ -1673,16 +1662,7 @@
static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct request *rq, bool for_preempt)
{
- sector_t sdist = cfqq->seek_mean;
-
- if (!sample_valid(cfqq->seek_samples))
- sdist = CFQQ_SEEK_THR;
-
- /* if seek_mean is big, using it as close criteria is meaningless */
- if (sdist > CFQQ_SEEK_THR && !for_preempt)
- sdist = CFQQ_SEEK_THR;
-
- return cfq_dist_from_last(cfqd, rq) <= sdist;
+ return cfq_dist_from_last(cfqd, rq) <= CFQQ_SEEK_THR;
}
static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
@@ -1878,8 +1858,7 @@
cfqq->dispatched++;
elv_dispatch_sort(q, rq);
- if (cfq_cfqq_sync(cfqq))
- cfqd->sync_flight++;
+ cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
cfqq->nr_sectors += blk_rq_sectors(rq);
}
@@ -2219,6 +2198,19 @@
return dispatched;
}
+static inline bool cfq_slice_used_soon(struct cfq_data *cfqd,
+ struct cfq_queue *cfqq)
+{
+ /* the queue hasn't finished any request, can't estimate */
+ if (cfq_cfqq_slice_new(cfqq))
+ return 1;
+ if (time_after(jiffies + cfqd->cfq_slice_idle * cfqq->dispatched,
+ cfqq->slice_end))
+ return 1;
+
+ return 0;
+}
+
static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
unsigned int max_dispatch;
@@ -2226,16 +2218,16 @@
/*
* Drain async requests before we start sync IO
*/
- if (cfq_should_idle(cfqd, cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
+ if (cfq_should_idle(cfqd, cfqq) && cfqd->rq_in_flight[BLK_RW_ASYNC])
return false;
/*
* If this is an async queue and we have sync IO in flight, let it wait
*/
- if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq))
+ if (cfqd->rq_in_flight[BLK_RW_SYNC] && !cfq_cfqq_sync(cfqq))
return false;
- max_dispatch = cfqd->cfq_quantum;
+ max_dispatch = max_t(unsigned int, cfqd->cfq_quantum / 2, 1);
if (cfq_class_idle(cfqq))
max_dispatch = 1;
@@ -2252,13 +2244,22 @@
/*
* We have other queues, don't allow more IO from this one
*/
- if (cfqd->busy_queues > 1)
+ if (cfqd->busy_queues > 1 && cfq_slice_used_soon(cfqd, cfqq))
return false;
/*
* Sole queue user, no limit
*/
- max_dispatch = -1;
+ if (cfqd->busy_queues == 1)
+ max_dispatch = -1;
+ else
+ /*
+ * Normally we start throttling cfqq when cfq_quantum/2
+ * requests have been dispatched. But we can drive
+ * deeper queue depths at the beginning of slice
+ * subjected to upper limit of cfq_quantum.
+ * */
+ max_dispatch = cfqd->cfq_quantum;
}
/*
@@ -2980,30 +2981,20 @@
cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct request *rq)
{
- sector_t sdist;
- u64 total;
+ sector_t sdist = 0;
+ sector_t n_sec = blk_rq_sectors(rq);
+ if (cfqq->last_request_pos) {
+ if (cfqq->last_request_pos < blk_rq_pos(rq))
+ sdist = blk_rq_pos(rq) - cfqq->last_request_pos;
+ else
+ sdist = cfqq->last_request_pos - blk_rq_pos(rq);
+ }
- if (!cfqq->last_request_pos)
- sdist = 0;
- else if (cfqq->last_request_pos < blk_rq_pos(rq))
- sdist = blk_rq_pos(rq) - cfqq->last_request_pos;
+ cfqq->seek_history <<= 1;
+ if (blk_queue_nonrot(cfqd->queue))
+ cfqq->seek_history |= (n_sec < CFQQ_SECT_THR_NONROT);
else
- sdist = cfqq->last_request_pos - blk_rq_pos(rq);
-
- /*
- * Don't allow the seek distance to get too large from the
- * odd fragment, pagein, etc
- */
- if (cfqq->seek_samples <= 60) /* second&third seek */
- sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*1024);
- else
- sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*64);
-
- cfqq->seek_samples = (7*cfqq->seek_samples + 256) / 8;
- cfqq->seek_total = (7*cfqq->seek_total + (u64)256*sdist) / 8;
- total = cfqq->seek_total + (cfqq->seek_samples/2);
- do_div(total, cfqq->seek_samples);
- cfqq->seek_mean = (sector_t)total;
+ cfqq->seek_history |= (sdist > CFQQ_SEEK_THR);
}
/*
@@ -3028,8 +3019,7 @@
cfq_mark_cfqq_deep(cfqq);
if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
- (!cfq_cfqq_deep(cfqq) && sample_valid(cfqq->seek_samples)
- && CFQQ_SEEKY(cfqq)))
+ (!cfq_cfqq_deep(cfqq) && CFQQ_SEEKY(cfqq)))
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
if (cic->ttime_mean > cfqd->cfq_slice_idle)
@@ -3215,14 +3205,14 @@
{
struct cfq_queue *cfqq = cfqd->active_queue;
- if (rq_in_driver(cfqd) > cfqd->hw_tag_est_depth)
- cfqd->hw_tag_est_depth = rq_in_driver(cfqd);
+ if (cfqd->rq_in_driver > cfqd->hw_tag_est_depth)
+ cfqd->hw_tag_est_depth = cfqd->rq_in_driver;
if (cfqd->hw_tag == 1)
return;
if (cfqd->rq_queued <= CFQ_HW_QUEUE_MIN &&
- rq_in_driver(cfqd) <= CFQ_HW_QUEUE_MIN)
+ cfqd->rq_in_driver <= CFQ_HW_QUEUE_MIN)
return;
/*
@@ -3232,7 +3222,7 @@
*/
if (cfqq && cfq_cfqq_idle_window(cfqq) &&
cfqq->dispatched + cfqq->queued[0] + cfqq->queued[1] <
- CFQ_HW_QUEUE_MIN && rq_in_driver(cfqd) < CFQ_HW_QUEUE_MIN)
+ CFQ_HW_QUEUE_MIN && cfqd->rq_in_driver < CFQ_HW_QUEUE_MIN)
return;
if (cfqd->hw_tag_samples++ < 50)
@@ -3285,13 +3275,12 @@
cfq_update_hw_tag(cfqd);
- WARN_ON(!cfqd->rq_in_driver[sync]);
+ WARN_ON(!cfqd->rq_in_driver);
WARN_ON(!cfqq->dispatched);
- cfqd->rq_in_driver[sync]--;
+ cfqd->rq_in_driver--;
cfqq->dispatched--;
- if (cfq_cfqq_sync(cfqq))
- cfqd->sync_flight--;
+ cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
if (sync) {
RQ_CIC(rq)->last_end_request = now;
@@ -3345,7 +3334,7 @@
}
}
- if (!rq_in_driver(cfqd))
+ if (!cfqd->rq_in_driver)
cfq_schedule_dispatch(cfqd);
}
diff --git a/block/elevator.c b/block/elevator.c
index 9ad5ccc..ee3a883 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -474,6 +474,15 @@
int ret;
/*
+ * Levels of merges:
+ * nomerges: No merges at all attempted
+ * noxmerges: Only simple one-hit cache try
+ * merges: All merge tries attempted
+ */
+ if (blk_queue_nomerges(q))
+ return ELEVATOR_NO_MERGE;
+
+ /*
* First try one-hit cache.
*/
if (q->last_merge) {
@@ -484,7 +493,7 @@
}
}
- if (blk_queue_nomerges(q))
+ if (blk_queue_noxmerges(q))
return ELEVATOR_NO_MERGE;
/*
diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h
index 3b20786..3e50c74 100644
--- a/drivers/acpi/acpica/accommon.h
+++ b/drivers/acpi/acpica/accommon.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index a4471e3..33181ad 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index a4fb001..48faf3e 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h
index 6291904..894a0ff 100644
--- a/drivers/acpi/acpica/acdispat.h
+++ b/drivers/acpi/acpica/acdispat.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 4ced54f..3e6ba99 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -133,8 +133,7 @@
acpi_status
acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
u32 function,
- u32 region_offset,
- u32 bit_width, acpi_integer * value);
+ u32 region_offset, u32 bit_width, u64 *value);
acpi_status
acpi_ev_attach_region(union acpi_operand_object *handler_obj,
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 29ba66d..f8dd8f2 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 36192f1..5900f13 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h
index 5db9f29..6df3f84 100644
--- a/drivers/acpi/acpica/acinterp.h
+++ b/drivers/acpi/acpica/acinterp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -129,18 +129,17 @@
acpi_status
acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc,
- acpi_integer mask,
- acpi_integer field_value,
- u32 field_datum_byte_offset);
+ u64 mask,
+ u64 field_value, u32 field_datum_byte_offset);
void
-acpi_ex_get_buffer_datum(acpi_integer * datum,
+acpi_ex_get_buffer_datum(u64 *datum,
void *buffer,
u32 buffer_length,
u32 byte_granularity, u32 buffer_offset);
void
-acpi_ex_set_buffer_datum(acpi_integer merged_datum,
+acpi_ex_set_buffer_datum(u64 merged_datum,
void *buffer,
u32 buffer_length,
u32 byte_granularity, u32 buffer_offset);
@@ -168,8 +167,7 @@
acpi_status
acpi_ex_access_region(union acpi_operand_object *obj_desc,
- u32 field_datum_byte_offset,
- acpi_integer * value, u32 read_write);
+ u32 field_datum_byte_offset, u64 *value, u32 read_write);
/*
* exmisc - misc support routines
@@ -193,16 +191,14 @@
acpi_status
acpi_ex_do_logical_numeric_op(u16 opcode,
- acpi_integer integer0,
- acpi_integer integer1, u8 * logical_result);
+ u64 integer0, u64 integer1, u8 *logical_result);
acpi_status
acpi_ex_do_logical_op(u16 opcode,
union acpi_operand_object *operand0,
- union acpi_operand_object *operand1, u8 * logical_result);
+ union acpi_operand_object *operand1, u8 *logical_result);
-acpi_integer
-acpi_ex_do_math_op(u16 opcode, acpi_integer operand0, acpi_integer operand1);
+u64 acpi_ex_do_math_op(u16 opcode, u64 operand0, u64 operand1);
acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state);
@@ -278,7 +274,7 @@
acpi_ex_system_do_notify_op(union acpi_operand_object *value,
union acpi_operand_object *obj_desc);
-acpi_status acpi_ex_system_do_suspend(acpi_integer time);
+acpi_status acpi_ex_system_do_suspend(u64 time);
acpi_status acpi_ex_system_do_stall(u32 time);
@@ -461,9 +457,9 @@
void acpi_ex_release_global_lock(u32 rule);
-void acpi_ex_eisa_id_to_string(char *dest, acpi_integer compressed_id);
+void acpi_ex_eisa_id_to_string(char *dest, u64 compressed_id);
-void acpi_ex_integer_to_string(char *dest, acpi_integer value);
+void acpi_ex_integer_to_string(char *dest, u64 value);
/*
* exregion - default op_region handlers
@@ -472,7 +468,7 @@
acpi_ex_system_memory_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context,
void *region_context);
@@ -480,35 +476,35 @@
acpi_ex_system_io_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
acpi_status
acpi_ex_pci_config_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
acpi_status
acpi_ex_cmos_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
acpi_status
acpi_ex_pci_bar_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
acpi_status
acpi_ex_embedded_controller_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context,
void *region_context);
@@ -516,14 +512,14 @@
acpi_ex_sm_bus_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
acpi_status
acpi_ex_data_table_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context);
#endif /* __INTERP_H__ */
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 13cb80c..24b8faa 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -374,6 +374,7 @@
struct acpi_predefined_data {
char *pathname;
const union acpi_predefined_info *predefined;
+ union acpi_operand_object *parent_package;
u32 flags;
u8 node_flags;
};
@@ -651,8 +652,7 @@
};
union acpi_parse_value {
- acpi_integer integer; /* Integer constant (Up to 64 bits) */
- struct uint64_struct integer64; /* Structure overlay for 2 32-bit Dwords */
+ u64 integer; /* Integer constant (Up to 64 bits) */
u32 size; /* bytelist or field size */
char *string; /* NULL terminated string */
u8 *buffer; /* buffer or string */
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index 7d9ba6e..9894929 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -272,8 +272,8 @@
* MASK_BITS_ABOVE creates a mask starting AT the position and above
* MASK_BITS_BELOW creates a mask starting one bit BELOW the position
*/
-#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position))))
-#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position)))
+#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_UINT64_MAX) << ((u32) (position))))
+#define ACPI_MASK_BITS_BELOW(position) ((ACPI_UINT64_MAX) << ((u32) (position)))
/* Bitfields within ACPI registers */
@@ -414,16 +414,16 @@
acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
return (_s); })
#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
- register acpi_integer _s = (s); \
+ register u64 _s = (s); \
acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
return (_s); })
#define return_UINT8(s) ACPI_DO_WHILE0 ({ \
register u8 _s = (u8) (s); \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
return (_s); })
#define return_UINT32(s) ACPI_DO_WHILE0 ({ \
register u32 _s = (u32) (s); \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
return (_s); })
#else /* Use original less-safe macros */
@@ -434,7 +434,7 @@
acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
return((s)); })
#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
- acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
+ acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) (s)); \
return((s)); })
#define return_UINT8(s) return_VALUE(s)
#define return_UINT32(s) return_VALUE(s)
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 61edb15..258159c 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -286,6 +286,17 @@
acpi_ns_repair_package_list(struct acpi_predefined_data *data,
union acpi_operand_object **obj_desc_ptr);
+acpi_status
+acpi_ns_repair_null_element(struct acpi_predefined_data *data,
+ u32 expected_btypes,
+ u32 package_index,
+ union acpi_operand_object **return_object_ptr);
+
+void
+acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
+ u8 package_type,
+ union acpi_operand_object *obj_desc);
+
/*
* nsrepair2 - Return object repair for specific
* predefined methods/objects
@@ -296,11 +307,6 @@
acpi_status validate_status,
union acpi_operand_object **return_object_ptr);
-void
-acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
- u8 package_type,
- union acpi_operand_object *obj_desc);
-
/*
* nssearch - Namespace searching and entry
*/
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 07f6e2e..cde18ea 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -111,7 +111,7 @@
struct acpi_object_integer {
ACPI_OBJECT_COMMON_HEADER u8 fill[3]; /* Prevent warning on some compilers */
- acpi_integer value;
+ u64 value;
};
/*
diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h
index dfdf633..8c15ff4 100644
--- a/drivers/acpi/acpica/acopcode.h
+++ b/drivers/acpi/acpica/acopcode.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h
index 22881e8..d0bb0fd 100644
--- a/drivers/acpi/acpica/acparser.h
+++ b/drivers/acpi/acpica/acparser.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 57bdaf6..9711608 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h
index eef5bd7..528bcba 100644
--- a/drivers/acpi/acpica/acresrc.h
+++ b/drivers/acpi/acpica/acresrc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index 7980a26..161bc0e 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h
index 01c76b8..8ff3b74 100644
--- a/drivers/acpi/acpica/actables.h
+++ b/drivers/acpi/acpica/actables.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index 3a451a2..35df755 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -134,7 +134,7 @@
char *acpi_ut_get_event_name(u32 event_id);
-char acpi_ut_hex_to_ascii_char(acpi_integer integer, u32 position);
+char acpi_ut_hex_to_ascii_char(u64 integer, u32 position);
u8 acpi_ut_valid_object_type(acpi_object_type type);
@@ -279,8 +279,7 @@
void
acpi_ut_value_exit(u32 line_number,
const char *function_name,
- const char *module_name,
- u32 component_id, acpi_integer value);
+ const char *module_name, u32 component_id, u64 value);
void
acpi_ut_ptr_exit(u32 line_number,
@@ -324,7 +323,7 @@
acpi_status
acpi_ut_evaluate_numeric_object(char *object_name,
struct acpi_namespace_node *device_node,
- acpi_integer *value);
+ u64 *value);
acpi_status
acpi_ut_execute_STA(struct acpi_namespace_node *device_node, u32 *status_flags);
@@ -437,14 +436,12 @@
* utmath
*/
acpi_status
-acpi_ut_divide(acpi_integer in_dividend,
- acpi_integer in_divisor,
- acpi_integer * out_quotient, acpi_integer * out_remainder);
+acpi_ut_divide(u64 in_dividend,
+ u64 in_divisor, u64 *out_quotient, u64 *out_remainder);
acpi_status
-acpi_ut_short_divide(acpi_integer in_dividend,
- u32 divisor,
- acpi_integer * out_quotient, u32 * out_remainder);
+acpi_ut_short_divide(u64 in_dividend,
+ u32 divisor, u64 *out_quotient, u32 *out_remainder);
/*
* utmisc
@@ -474,8 +471,7 @@
u8 acpi_ut_valid_acpi_char(char character, u32 position);
-acpi_status
-acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer);
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_warning(const char *module_name,
diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h
index 4940249..1f484ba 100644
--- a/drivers/acpi/acpica/amlcode.h
+++ b/drivers/acpi/acpica/amlcode.h
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h
index 7b070e4..0e5798f 100644
--- a/drivers/acpi/acpica/amlresrc.h
+++ b/drivers/acpi/acpica/amlresrc.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index 54a225e..bb13817 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -220,7 +220,7 @@
union acpi_parse_object *arg)
{
acpi_status status;
- acpi_integer position;
+ u64 position;
ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info);
@@ -240,8 +240,8 @@
switch (arg->common.aml_opcode) {
case AML_INT_RESERVEDFIELD_OP:
- position = (acpi_integer) info->field_bit_position
- + (acpi_integer) arg->common.value.size;
+ position = (u64) info->field_bit_position
+ + (u64) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
ACPI_ERROR((AE_INFO,
@@ -305,8 +305,8 @@
/* Keep track of bit position for the next field */
- position = (acpi_integer) info->field_bit_position
- + (acpi_integer) arg->common.value.size;
+ position = (u64) info->field_bit_position
+ + (u64) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
ACPI_ERROR((AE_INFO,
diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
index f23fa0b..abe1403 100644
--- a/drivers/acpi/acpica/dsinit.c
+++ b/drivers/acpi/acpica/dsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index e786f9f..7210392 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index 0ba19f8..cc343b9 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 9bc1ba0..891e08b 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -684,7 +684,7 @@
case AML_ONES_OP:
- obj_desc->integer.value = ACPI_INTEGER_MAX;
+ obj_desc->integer.value = ACPI_UINT64_MAX;
/* Truncate value if we are executing from a 32-bit ACPI table */
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index b79978f..bf980ca 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index dfa1041..306c62a 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index f028085..6b76c48 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index b40513d..140a9d0 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dswscope.c b/drivers/acpi/acpica/dswscope.c
index 908645e..d1e7017 100644
--- a/drivers/acpi/acpica/dswscope.c
+++ b/drivers/acpi/acpica/dswscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index e46c821..050df81 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index cd55c77..c1e6f47 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 0b45346..837de66 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 3d4c4ac..fef7219 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index 8f0fac6..9a3cb70 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 5336d91..98fd210 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -329,7 +329,7 @@
* region_offset - Where in the region to read or write
* bit_width - Field width in bits (8, 16, 32, or 64)
* Value - Pointer to in or out value, must be
- * full 64-bit acpi_integer
+ * a full 64-bit integer
*
* RETURN: Status
*
@@ -341,8 +341,7 @@
acpi_status
acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
u32 function,
- u32 region_offset,
- u32 bit_width, acpi_integer * value)
+ u32 region_offset, u32 bit_width, u64 *value)
{
acpi_status status;
acpi_adr_space_handler handler;
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index ff16805..2e3b033 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -168,7 +168,7 @@
void *handler_context, void **region_context)
{
acpi_status status = AE_OK;
- acpi_integer pci_value;
+ u64 pci_value;
struct acpi_pci_id *pci_id = *region_context;
union acpi_operand_object *handler_obj;
struct acpi_namespace_node *parent_node;
diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c
index 567b356..8dfbaa9 100644
--- a/drivers/acpi/acpica/evsci.c
+++ b/drivers/acpi/acpica/evsci.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 474e2ca..b407579 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 124c157..5ff32c7 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index c98aa7c..541cbc1 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 46adfa5..7e8b3be 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -284,7 +284,7 @@
acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer)
{
acpi_status status;
- acpi_integer value;
+ u64 value;
u32 region_offset = 0;
u32 i;
@@ -490,7 +490,11 @@
status = acpi_tb_add_table(&table_desc, &table_index);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+
+ /* Delete allocated table buffer */
+
+ acpi_tb_delete_table(&table_desc);
+ return_ACPI_STATUS(status);
}
/*
@@ -533,13 +537,6 @@
acpi_gbl_table_handler_context);
}
- cleanup:
- if (ACPI_FAILURE(status)) {
-
- /* Delete allocated table buffer */
-
- acpi_tb_delete_table(&table_desc);
- }
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index 51d5f22..bda7aed 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -51,8 +51,7 @@
/* Local prototypes */
static u32
-acpi_ex_convert_to_ascii(acpi_integer integer,
- u16 base, u8 * string, u8 max_length);
+acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length);
/*******************************************************************************
*
@@ -75,7 +74,7 @@
{
union acpi_operand_object *return_desc;
u8 *pointer;
- acpi_integer result;
+ u64 result;
u32 i;
u32 count;
acpi_status status;
@@ -155,7 +154,7 @@
* Little endian is used, meaning that the first byte of the buffer
* is the LSB of the integer
*/
- result |= (((acpi_integer) pointer[i]) << (i * 8));
+ result |= (((u64) pointer[i]) << (i * 8));
}
break;
@@ -285,10 +284,9 @@
******************************************************************************/
static u32
-acpi_ex_convert_to_ascii(acpi_integer integer,
- u16 base, u8 * string, u8 data_width)
+acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width)
{
- acpi_integer digit;
+ u64 digit;
u32 i;
u32 j;
u32 k = 0;
@@ -531,10 +529,9 @@
* (separated by commas or spaces)
*/
for (i = 0; i < obj_desc->buffer.length; i++) {
- new_buf += acpi_ex_convert_to_ascii((acpi_integer)
- obj_desc->buffer.
- pointer[i], base,
- new_buf, 1);
+ new_buf += acpi_ex_convert_to_ascii((u64) obj_desc->
+ buffer.pointer[i],
+ base, new_buf, 1);
*new_buf++ = separator; /* each separated by a comma or space */
}
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 02b25d2..0aa57d9 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index de34463..d39d438 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 1588a2d..6c79fec 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -130,7 +130,7 @@
/* Call the region handler for the read */
status = acpi_ex_access_region(obj_desc, 0,
- ACPI_CAST_PTR(acpi_integer,
+ ACPI_CAST_PTR(u64,
buffer_desc->
buffer.pointer),
function);
@@ -141,7 +141,7 @@
/*
* Allocate a buffer for the contents of the field.
*
- * If the field is larger than the size of an acpi_integer, create
+ * If the field is larger than the current integer width, create
* a BUFFER to hold it. Otherwise, use an INTEGER. This allows
* the use of arithmetic operators on the returned value if the
* field size is equal or smaller than an Integer.
@@ -306,8 +306,7 @@
* same buffer)
*/
status = acpi_ex_access_region(obj_desc, 0,
- (acpi_integer *) buffer,
- function);
+ (u64 *) buffer, function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*result_desc = buffer_desc;
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index d7b3b41..f68a216 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -55,11 +55,10 @@
static acpi_status
acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
u32 field_datum_byte_offset,
- acpi_integer * value, u32 read_write);
+ u64 *value, u32 read_write);
static u8
-acpi_ex_register_overflow(union acpi_operand_object *obj_desc,
- acpi_integer value);
+acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value);
static acpi_status
acpi_ex_setup_region(union acpi_operand_object *obj_desc,
@@ -212,7 +211,7 @@
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
* Value - Where to store value (must at least
- * the size of acpi_integer)
+ * 64 bits)
* Function - Read or Write flag plus other region-
* dependent flags
*
@@ -224,8 +223,7 @@
acpi_status
acpi_ex_access_region(union acpi_operand_object *obj_desc,
- u32 field_datum_byte_offset,
- acpi_integer * value, u32 function)
+ u32 field_datum_byte_offset, u64 *value, u32 function)
{
acpi_status status;
union acpi_operand_object *rgn_desc;
@@ -317,8 +315,7 @@
******************************************************************************/
static u8
-acpi_ex_register_overflow(union acpi_operand_object *obj_desc,
- acpi_integer value)
+acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value)
{
if (obj_desc->common_field.bit_length >= ACPI_INTEGER_BIT_SIZE) {
@@ -329,7 +326,7 @@
return (FALSE);
}
- if (value >= ((acpi_integer) 1 << obj_desc->common_field.bit_length)) {
+ if (value >= ((u64) 1 << obj_desc->common_field.bit_length)) {
/*
* The Value is larger than the maximum value that can fit into
* the register.
@@ -362,11 +359,10 @@
static acpi_status
acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
- u32 field_datum_byte_offset,
- acpi_integer * value, u32 read_write)
+ u32 field_datum_byte_offset, u64 *value, u32 read_write)
{
acpi_status status;
- acpi_integer local_value;
+ u64 local_value;
ACPI_FUNCTION_TRACE_U32(ex_field_datum_io, field_datum_byte_offset);
@@ -439,8 +435,8 @@
* the register
*/
if (acpi_ex_register_overflow(obj_desc->bank_field.bank_obj,
- (acpi_integer) obj_desc->
- bank_field.value)) {
+ (u64) obj_desc->bank_field.
+ value)) {
return_ACPI_STATUS(AE_AML_REGISTER_LIMIT);
}
@@ -481,8 +477,8 @@
* the register
*/
if (acpi_ex_register_overflow(obj_desc->index_field.index_obj,
- (acpi_integer) obj_desc->
- index_field.value)) {
+ (u64) obj_desc->index_field.
+ value)) {
return_ACPI_STATUS(AE_AML_REGISTER_LIMIT);
}
@@ -512,7 +508,7 @@
status =
acpi_ex_extract_from_field(obj_desc->index_field.
data_obj, value,
- sizeof(acpi_integer));
+ sizeof(u64));
} else {
/* Write the datum to the data_register */
@@ -523,7 +519,7 @@
status =
acpi_ex_insert_into_field(obj_desc->index_field.
data_obj, value,
- sizeof(acpi_integer));
+ sizeof(u64));
}
break;
@@ -571,13 +567,12 @@
acpi_status
acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc,
- acpi_integer mask,
- acpi_integer field_value,
- u32 field_datum_byte_offset)
+ u64 mask,
+ u64 field_value, u32 field_datum_byte_offset)
{
acpi_status status = AE_OK;
- acpi_integer merged_value;
- acpi_integer current_value;
+ u64 merged_value;
+ u64 current_value;
ACPI_FUNCTION_TRACE_U32(ex_write_with_update_rule, mask);
@@ -587,7 +582,7 @@
/* If the mask is all ones, we don't need to worry about the update rule */
- if (mask != ACPI_INTEGER_MAX) {
+ if (mask != ACPI_UINT64_MAX) {
/* Decode the update rule */
@@ -678,8 +673,8 @@
void *buffer, u32 buffer_length)
{
acpi_status status;
- acpi_integer raw_datum;
- acpi_integer merged_datum;
+ u64 raw_datum;
+ u64 merged_datum;
u32 field_offset = 0;
u32 buffer_offset = 0;
u32 buffer_tail_bits;
@@ -804,10 +799,10 @@
void *buffer, u32 buffer_length)
{
acpi_status status;
- acpi_integer mask;
- acpi_integer width_mask;
- acpi_integer merged_datum;
- acpi_integer raw_datum = 0;
+ u64 mask;
+ u64 width_mask;
+ u64 merged_datum;
+ u64 raw_datum = 0;
u32 field_offset = 0;
u32 buffer_offset = 0;
u32 buffer_tail_bits;
@@ -855,7 +850,7 @@
* shift operator
*/
if (obj_desc->common_field.access_bit_width == ACPI_INTEGER_BIT_SIZE) {
- width_mask = ACPI_INTEGER_MAX;
+ width_mask = ACPI_UINT64_MAX;
} else {
width_mask =
ACPI_MASK_BITS_ABOVE(obj_desc->common_field.
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 998eac3..c5bb1ee 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -409,8 +409,7 @@
*
******************************************************************************/
-acpi_integer
-acpi_ex_do_math_op(u16 opcode, acpi_integer integer0, acpi_integer integer1)
+u64 acpi_ex_do_math_op(u16 opcode, u64 integer0, u64 integer1)
{
ACPI_FUNCTION_ENTRY();
@@ -498,8 +497,7 @@
acpi_status
acpi_ex_do_logical_numeric_op(u16 opcode,
- acpi_integer integer0,
- acpi_integer integer1, u8 * logical_result)
+ u64 integer0, u64 integer1, u8 *logical_result)
{
acpi_status status = AE_OK;
u8 local_result = FALSE;
@@ -564,8 +562,8 @@
union acpi_operand_object *operand1, u8 * logical_result)
{
union acpi_operand_object *local_operand1 = operand1;
- acpi_integer integer0;
- acpi_integer integer1;
+ u64 integer0;
+ u64 integer1;
u32 length0;
u32 length1;
acpi_status status = AE_OK;
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index 3c456bd..cc8a102 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c
index ffdae12..679f308 100644
--- a/drivers/acpi/acpica/exnames.c
+++ b/drivers/acpi/acpica/exnames.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index 752fe48..99adbab 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -261,8 +261,8 @@
union acpi_operand_object *return_desc2 = NULL;
u32 temp32;
u32 i;
- acpi_integer power_of_ten;
- acpi_integer digit;
+ u64 power_of_ten;
+ u64 digit;
ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_1T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
@@ -362,7 +362,7 @@
/* Sum the digit into the result with the current power of 10 */
return_desc->integer.value +=
- (((acpi_integer) temp32) * power_of_ten);
+ (((u64) temp32) * power_of_ten);
/* Shift to next BCD digit */
@@ -392,7 +392,7 @@
* remainder from above
*/
return_desc->integer.value |=
- (((acpi_integer) temp32) << ACPI_MUL_4(i));
+ (((u64) temp32) << ACPI_MUL_4(i));
}
/* Overflow if there is any data left in Digit */
@@ -439,7 +439,7 @@
/* The object exists in the namespace, return TRUE */
- return_desc->integer.value = ACPI_INTEGER_MAX;
+ return_desc->integer.value = ACPI_UINT64_MAX;
goto cleanup;
default:
@@ -589,7 +589,7 @@
union acpi_operand_object *return_desc = NULL;
acpi_status status = AE_OK;
u32 type;
- acpi_integer value;
+ u64 value;
ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_0T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
@@ -610,7 +610,7 @@
* return_desc->Integer.Value is initially == 0 (FALSE) from above.
*/
if (!operand[0]->integer.value) {
- return_desc->integer.value = ACPI_INTEGER_MAX;
+ return_desc->integer.value = ACPI_UINT64_MAX;
}
break;
diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c
index 85d95c9..22841bb 100644
--- a/drivers/acpi/acpica/exoparg2.c
+++ b/drivers/acpi/acpica/exoparg2.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -282,7 +282,7 @@
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
- acpi_integer index;
+ u64 index;
acpi_status status = AE_OK;
acpi_size length;
@@ -584,7 +584,7 @@
* Default is FALSE (zero)
*/
if (logical_result) {
- return_desc->integer.value = ACPI_INTEGER_MAX;
+ return_desc->integer.value = ACPI_UINT64_MAX;
}
cleanup:
diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c
index 253f9e1..8bb1012 100644
--- a/drivers/acpi/acpica/exoparg3.c
+++ b/drivers/acpi/acpica/exoparg3.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -148,7 +148,7 @@
union acpi_operand_object *return_desc = NULL;
char *buffer = NULL;
acpi_status status = AE_OK;
- acpi_integer index;
+ u64 index;
acpi_size length;
ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_1T_1R,
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index 295542e..f256b6a 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -218,7 +218,7 @@
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
acpi_status status = AE_OK;
- acpi_integer index;
+ u64 index;
union acpi_operand_object *this_element;
ACPI_FUNCTION_TRACE_STR(ex_opcode_6A_0T_1R,
@@ -253,9 +253,9 @@
}
/* Create an integer for the return value */
- /* Default return value is ACPI_INTEGER_MAX if no match found */
+ /* Default return value is ACPI_UINT64_MAX if no match found */
- return_desc = acpi_ut_create_integer_object(ACPI_INTEGER_MAX);
+ return_desc = acpi_ut_create_integer_object(ACPI_UINT64_MAX);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
@@ -270,7 +270,7 @@
*
* Upon finding a match, the loop will terminate via "break" at
* the bottom. If it terminates "normally", match_value will be
- * ACPI_INTEGER_MAX (Ones) (its initial value) indicating that no
+ * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
* match was found.
*/
for (; index < operand[0]->package.count; index++) {
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 52fec07..edf62bf 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 2bd83ac..486b2e5 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -70,7 +70,7 @@
acpi_ex_system_memory_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
@@ -115,8 +115,7 @@
* Hardware does not support non-aligned data transfers, we must verify
* the request.
*/
- (void)acpi_ut_short_divide((acpi_integer) address, length, NULL,
- &remainder);
+ (void)acpi_ut_short_divide((u64) address, length, NULL, &remainder);
if (remainder != 0) {
return_ACPI_STATUS(AE_AML_ALIGNMENT);
}
@@ -128,10 +127,9 @@
* 2) Address beyond the current mapping?
*/
if ((address < mem_info->mapped_physical_address) ||
- (((acpi_integer) address + length) > ((acpi_integer)
- mem_info->
- mapped_physical_address +
- mem_info->mapped_length))) {
+ (((u64) address + length) > ((u64)
+ mem_info->mapped_physical_address +
+ mem_info->mapped_length))) {
/*
* The request cannot be resolved by the current memory mapping;
* Delete the existing mapping and create a new one.
@@ -193,8 +191,7 @@
* access
*/
logical_addr_ptr = mem_info->mapped_logical_address +
- ((acpi_integer) address -
- (acpi_integer) mem_info->mapped_physical_address);
+ ((u64) address - (u64) mem_info->mapped_physical_address);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"System-Memory (width %d) R/W %d Address=%8.8X%8.8X\n",
@@ -215,19 +212,19 @@
*value = 0;
switch (bit_width) {
case 8:
- *value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
+ *value = (u64) ACPI_GET8(logical_addr_ptr);
break;
case 16:
- *value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
+ *value = (u64) ACPI_GET16(logical_addr_ptr);
break;
case 32:
- *value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
+ *value = (u64) ACPI_GET32(logical_addr_ptr);
break;
case 64:
- *value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
+ *value = (u64) ACPI_GET64(logical_addr_ptr);
break;
default:
@@ -291,7 +288,7 @@
acpi_ex_system_io_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
@@ -350,7 +347,7 @@
acpi_ex_pci_config_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
@@ -425,7 +422,7 @@
acpi_ex_cmos_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
@@ -457,7 +454,7 @@
acpi_ex_pci_bar_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
acpi_status status = AE_OK;
@@ -489,7 +486,7 @@
acpi_ex_data_table_space_handler(u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context, void *region_context)
{
ACPI_FUNCTION_TRACE(ex_data_table_space_handler);
diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c
index 607958f..fdc1b27 100644
--- a/drivers/acpi/acpica/exresnte.c
+++ b/drivers/acpi/acpica/exresnte.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index c93b54c..fdd6a70 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index 5c729a9..c5ecd61 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 6efd07a..702b9ec 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c
index 608e838..d4af684 100644
--- a/drivers/acpi/acpica/exstoren.c
+++ b/drivers/acpi/acpica/exstoren.c
@@ -7,7 +7,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 257706e..e972b66 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 3d00b93..e11b6cb 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -193,7 +193,7 @@
*
******************************************************************************/
-acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
+acpi_status acpi_ex_system_do_suspend(u64 how_long)
{
ACPI_FUNCTION_ENTRY();
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index 7d41f99..74c24d5 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -67,7 +67,7 @@
ACPI_MODULE_NAME("exutils")
/* Local prototypes */
-static u32 acpi_ex_digits_needed(acpi_integer value, u32 base);
+static u32 acpi_ex_digits_needed(u64 value, u32 base);
#ifndef ACPI_NO_METHOD_EXECUTION
/*******************************************************************************
@@ -230,7 +230,7 @@
* We are running a method that exists in a 32-bit ACPI table.
* Truncate the value to 32 bits by zeroing out the upper 32-bit field
*/
- obj_desc->integer.value &= (acpi_integer) ACPI_UINT32_MAX;
+ obj_desc->integer.value &= (u64) ACPI_UINT32_MAX;
}
}
@@ -327,14 +327,14 @@
*
******************************************************************************/
-static u32 acpi_ex_digits_needed(acpi_integer value, u32 base)
+static u32 acpi_ex_digits_needed(u64 value, u32 base)
{
u32 num_digits;
- acpi_integer current_value;
+ u64 current_value;
ACPI_FUNCTION_TRACE(ex_digits_needed);
- /* acpi_integer is unsigned, so we don't worry about a '-' prefix */
+ /* u64 is unsigned, so we don't worry about a '-' prefix */
if (value == 0) {
return_UINT32(1);
@@ -370,7 +370,7 @@
*
******************************************************************************/
-void acpi_ex_eisa_id_to_string(char *out_string, acpi_integer compressed_id)
+void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id)
{
u32 swapped_id;
@@ -394,10 +394,10 @@
(char)(0x40 + (((unsigned long)swapped_id >> 26) & 0x1F));
out_string[1] = (char)(0x40 + ((swapped_id >> 21) & 0x1F));
out_string[2] = (char)(0x40 + ((swapped_id >> 16) & 0x1F));
- out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 12);
- out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 8);
- out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 4);
- out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 0);
+ out_string[3] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 12);
+ out_string[4] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 8);
+ out_string[5] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 4);
+ out_string[6] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 0);
out_string[7] = 0;
}
@@ -418,7 +418,7 @@
*
******************************************************************************/
-void acpi_ex_integer_to_string(char *out_string, acpi_integer value)
+void acpi_ex_integer_to_string(char *out_string, u64 value)
{
u32 count;
u32 digits_needed;
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index 9af361a..679a112 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index c28c41b..bd72319 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -224,7 +224,7 @@
status = acpi_hw_read(&in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
+ return (status);
}
if (register_bit & in_byte) {
@@ -234,9 +234,7 @@
/* Set return value */
(*event_status) = local_event_status;
-
- unlock_and_exit:
- return (status);
+ return (AE_OK);
}
/******************************************************************************
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 15c9ed2..ec7fc22 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -7,7 +7,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index cc22f9a..5e6d4db 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index 6b282e8..1ef8e0b 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -140,7 +140,7 @@
{
acpi_status status;
u32 delta_ticks;
- acpi_integer quotient;
+ u64 quotient;
ACPI_FUNCTION_TRACE(acpi_get_timer_duration);
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index ec33f27..e26c17d 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 647c7b6..50cc3be 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index d622ba7..aa2b801 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 8a58a1b..982269c 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index e37836e..0689d36 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c
index 36be7f0..d2a9792 100644
--- a/drivers/acpi/acpica/nsdumpdv.c
+++ b/drivers/acpi/acpica/nsdumpdv.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c
index af9fe91..f52829c 100644
--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 4f8abac..9bd6f05 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c
index a7234e6..df18be9 100644
--- a/drivers/acpi/acpica/nsload.c
+++ b/drivers/acpi/acpica/nsload.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 8f9a487..9593724 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index 60f3af0..41a9213 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c
index 662a4bd..27cda52 100644
--- a/drivers/acpi/acpica/nsparse.c
+++ b/drivers/acpi/acpica/nsparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index d34fa59..7096bcd 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -231,6 +231,7 @@
* Note: Package may have been newly created by call above.
*/
if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) {
+ data->parent_package = *return_object_ptr;
status = acpi_ns_check_package(data, return_object_ptr);
if (ACPI_FAILURE(status)) {
goto exit;
@@ -710,6 +711,7 @@
for (i = 0; i < count; i++) {
sub_package = *elements;
sub_elements = sub_package->package.elements;
+ data->parent_package = sub_package;
/* Each sub-object must be of type Package */
@@ -721,6 +723,7 @@
/* Examine the different types of expected sub-packages */
+ data->parent_package = sub_package;
switch (package->ret_info.type) {
case ACPI_PTYPE2:
case ACPI_PTYPE2_PKG_COUNT:
@@ -800,7 +803,7 @@
/*
* First element is the (Integer) count of elements, including
- * the count field.
+ * the count field (the ACPI name is num_elements)
*/
status = acpi_ns_check_object_type(data, sub_elements,
ACPI_RTYPE_INTEGER,
@@ -822,6 +825,16 @@
expected_count = package->ret_info.count1;
goto package_too_small;
}
+ if (expected_count == 0) {
+ /*
+ * Either the num_entries element was originally zero or it was
+ * a NULL element and repaired to an Integer of value zero.
+ * In either case, repair it by setting num_entries to be the
+ * actual size of the subpackage.
+ */
+ expected_count = sub_package->package.count;
+ (*sub_elements)->integer.value = expected_count;
+ }
/* Check the type of each sub-package element */
@@ -945,10 +958,18 @@
char type_buffer[48]; /* Room for 5 types */
/*
- * If we get a NULL return_object here, it is a NULL package element,
- * and this is always an error.
+ * If we get a NULL return_object here, it is a NULL package element.
+ * Since all extraneous NULL package elements were removed earlier by a
+ * call to acpi_ns_remove_null_elements, this is an unexpected NULL element.
+ * We will attempt to repair it.
*/
if (!return_object) {
+ status = acpi_ns_repair_null_element(data, expected_btypes,
+ package_index,
+ return_object_ptr);
+ if (ACPI_SUCCESS(status)) {
+ return (AE_OK); /* Repair was successful */
+ }
goto type_error_exit;
}
@@ -1000,27 +1021,25 @@
/* Is the object one of the expected types? */
- if (!(return_btype & expected_btypes)) {
+ if (return_btype & expected_btypes) {
- /* Type mismatch -- attempt repair of the returned object */
+ /* For reference objects, check that the reference type is correct */
- status = acpi_ns_repair_object(data, expected_btypes,
- package_index,
- return_object_ptr);
- if (ACPI_SUCCESS(status)) {
- return (AE_OK); /* Repair was successful */
+ if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
+ status = acpi_ns_check_reference(data, return_object);
}
- goto type_error_exit;
+
+ return (status);
}
- /* For reference objects, check that the reference type is correct */
+ /* Type mismatch -- attempt repair of the returned object */
- if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
- status = acpi_ns_check_reference(data, return_object);
+ status = acpi_ns_repair_object(data, expected_btypes,
+ package_index, return_object_ptr);
+ if (ACPI_SUCCESS(status)) {
+ return (AE_OK); /* Repair was successful */
}
- return (status);
-
type_error_exit:
/* Create a string with all expected types for this predefined object */
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index 4fd1bdb..d4be377 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,6 +45,7 @@
#include "accommon.h"
#include "acnamesp.h"
#include "acinterp.h"
+#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsrepair")
@@ -71,6 +72,12 @@
* Buffer -> Package of Integers
* Package -> Package of one Package
*
+ * Additional possible repairs:
+ *
+ * Optional/unnecessary NULL package elements removed
+ * Required package elements that are NULL replaced by Integer/String/Buffer
+ * Incorrect standalone package wrapped with required outer package
+ *
******************************************************************************/
/* Local prototypes */
static acpi_status
@@ -506,6 +513,172 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_ns_repair_null_element
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * expected_btypes - Object types expected
+ * package_index - Index of object within parent package (if
+ * applicable - ACPI_NOT_PACKAGE_ELEMENT
+ * otherwise)
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if repair was successful.
+ *
+ * DESCRIPTION: Attempt to repair a NULL element of a returned Package object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_repair_null_element(struct acpi_predefined_data *data,
+ u32 expected_btypes,
+ u32 package_index,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ union acpi_operand_object *new_object;
+
+ ACPI_FUNCTION_NAME(ns_repair_null_element);
+
+ /* No repair needed if return object is non-NULL */
+
+ if (return_object) {
+ return (AE_OK);
+ }
+
+ /*
+ * Attempt to repair a NULL element of a Package object. This applies to
+ * predefined names that return a fixed-length package and each element
+ * is required. It does not apply to variable-length packages where NULL
+ * elements are allowed, especially at the end of the package.
+ */
+ if (expected_btypes & ACPI_RTYPE_INTEGER) {
+
+ /* Need an Integer - create a zero-value integer */
+
+ new_object = acpi_ut_create_integer_object(0);
+ } else if (expected_btypes & ACPI_RTYPE_STRING) {
+
+ /* Need a String - create a NULL string */
+
+ new_object = acpi_ut_create_string_object(0);
+ } else if (expected_btypes & ACPI_RTYPE_BUFFER) {
+
+ /* Need a Buffer - create a zero-length buffer */
+
+ new_object = acpi_ut_create_buffer_object(0);
+ } else {
+ /* Error for all other expected types */
+
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ if (!new_object) {
+ return (AE_NO_MEMORY);
+ }
+
+ /* Set the reference count according to the parent Package object */
+
+ new_object->common.reference_count =
+ data->parent_package->common.reference_count;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Converted NULL package element to expected %s at index %u\n",
+ data->pathname,
+ acpi_ut_get_object_type_name(new_object),
+ package_index));
+
+ *return_object_ptr = new_object;
+ data->flags |= ACPI_OBJECT_REPAIRED;
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_remove_null_elements
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * package_type - An acpi_return_package_types value
+ * obj_desc - A Package object
+ *
+ * RETURN: None.
+ *
+ * DESCRIPTION: Remove all NULL package elements from packages that contain
+ * a variable number of sub-packages. For these types of
+ * packages, NULL elements can be safely removed.
+ *
+ *****************************************************************************/
+
+void
+acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
+ u8 package_type,
+ union acpi_operand_object *obj_desc)
+{
+ union acpi_operand_object **source;
+ union acpi_operand_object **dest;
+ u32 count;
+ u32 new_count;
+ u32 i;
+
+ ACPI_FUNCTION_NAME(ns_remove_null_elements);
+
+ /*
+ * PTYPE1 packages contain no subpackages.
+ * PTYPE2 packages contain a variable number of sub-packages. We can
+ * safely remove all NULL elements from the PTYPE2 packages.
+ */
+ switch (package_type) {
+ case ACPI_PTYPE1_FIXED:
+ case ACPI_PTYPE1_VAR:
+ case ACPI_PTYPE1_OPTION:
+ return;
+
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_COUNT:
+ case ACPI_PTYPE2_PKG_COUNT:
+ case ACPI_PTYPE2_FIXED:
+ case ACPI_PTYPE2_MIN:
+ case ACPI_PTYPE2_REV_FIXED:
+ break;
+
+ default:
+ return;
+ }
+
+ count = obj_desc->package.count;
+ new_count = count;
+
+ source = obj_desc->package.elements;
+ dest = source;
+
+ /* Examine all elements of the package object, remove nulls */
+
+ for (i = 0; i < count; i++) {
+ if (!*source) {
+ new_count--;
+ } else {
+ *dest = *source;
+ dest++;
+ }
+ source++;
+ }
+
+ /* Update parent package if any null elements were removed */
+
+ if (new_count < count) {
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Found and removed %u NULL elements\n",
+ data->pathname, (count - new_count)));
+
+ /* NULL terminate list and update the package count */
+
+ *dest = NULL;
+ obj_desc->package.count = new_count;
+ }
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ns_repair_package_list
*
* PARAMETERS: Data - Pointer to validation data structure
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
index f13691c..61bd0f67 100644
--- a/drivers/acpi/acpica/nsrepair2.c
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,7 +45,6 @@
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
-#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsrepair2")
@@ -93,7 +92,7 @@
u32 sort_index,
u8 sort_direction, char *sort_key_name);
-static acpi_status
+static void
acpi_ns_sort_list(union acpi_operand_object **elements,
u32 count, u32 index, u8 sort_direction);
@@ -443,7 +442,6 @@
union acpi_operand_object *obj_desc;
u32 i;
u32 previous_value;
- acpi_status status;
ACPI_FUNCTION_NAME(ns_check_sorted_list);
@@ -494,19 +492,15 @@
/*
* The list must be sorted in the specified order. If we detect a
- * discrepancy, issue a warning and sort the entire list
+ * discrepancy, sort the entire list.
*/
if (((sort_direction == ACPI_SORT_ASCENDING) &&
(obj_desc->integer.value < previous_value)) ||
((sort_direction == ACPI_SORT_DESCENDING) &&
(obj_desc->integer.value > previous_value))) {
- status =
- acpi_ns_sort_list(return_object->package.elements,
- outer_element_count, sort_index,
- sort_direction);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ acpi_ns_sort_list(return_object->package.elements,
+ outer_element_count, sort_index,
+ sort_direction);
data->flags |= ACPI_OBJECT_REPAIRED;
@@ -525,89 +519,6 @@
/******************************************************************************
*
- * FUNCTION: acpi_ns_remove_null_elements
- *
- * PARAMETERS: Data - Pointer to validation data structure
- * package_type - An acpi_return_package_types value
- * obj_desc - A Package object
- *
- * RETURN: None.
- *
- * DESCRIPTION: Remove all NULL package elements from packages that contain
- * a variable number of sub-packages.
- *
- *****************************************************************************/
-
-void
-acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
- u8 package_type,
- union acpi_operand_object *obj_desc)
-{
- union acpi_operand_object **source;
- union acpi_operand_object **dest;
- u32 count;
- u32 new_count;
- u32 i;
-
- ACPI_FUNCTION_NAME(ns_remove_null_elements);
-
- /*
- * PTYPE1 packages contain no subpackages.
- * PTYPE2 packages contain a variable number of sub-packages. We can
- * safely remove all NULL elements from the PTYPE2 packages.
- */
- switch (package_type) {
- case ACPI_PTYPE1_FIXED:
- case ACPI_PTYPE1_VAR:
- case ACPI_PTYPE1_OPTION:
- return;
-
- case ACPI_PTYPE2:
- case ACPI_PTYPE2_COUNT:
- case ACPI_PTYPE2_PKG_COUNT:
- case ACPI_PTYPE2_FIXED:
- case ACPI_PTYPE2_MIN:
- case ACPI_PTYPE2_REV_FIXED:
- break;
-
- default:
- return;
- }
-
- count = obj_desc->package.count;
- new_count = count;
-
- source = obj_desc->package.elements;
- dest = source;
-
- /* Examine all elements of the package object, remove nulls */
-
- for (i = 0; i < count; i++) {
- if (!*source) {
- new_count--;
- } else {
- *dest = *source;
- dest++;
- }
- source++;
- }
-
- /* Update parent package if any null elements were removed */
-
- if (new_count < count) {
- ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
- "%s: Found and removed %u NULL elements\n",
- data->pathname, (count - new_count)));
-
- /* NULL terminate list and update the package count */
-
- *dest = NULL;
- obj_desc->package.count = new_count;
- }
-}
-
-/******************************************************************************
- *
* FUNCTION: acpi_ns_sort_list
*
* PARAMETERS: Elements - Package object element list
@@ -615,15 +526,16 @@
* Index - Sort by which package element
* sort_direction - Ascending or Descending sort
*
- * RETURN: Status
+ * RETURN: None
*
* DESCRIPTION: Sort the objects that are in a package element list.
*
- * NOTE: Assumes that all NULL elements have been removed from the package.
+ * NOTE: Assumes that all NULL elements have been removed from the package,
+ * and that all elements have been verified to be of type Integer.
*
*****************************************************************************/
-static acpi_status
+static void
acpi_ns_sort_list(union acpi_operand_object **elements,
u32 count, u32 index, u8 sort_direction)
{
@@ -652,6 +564,4 @@
}
}
}
-
- return (AE_OK);
}
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 7e86563..08f8b3f 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index 47d91e6..24d05a8 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index d7e6b52..00e79fb 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index f0c0892..ebef8a7 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -562,25 +562,20 @@
return (AE_BAD_PARAMETER);
}
- /* Run _STA to determine if device is present */
-
- status = acpi_ut_execute_STA(node, &flags);
- if (ACPI_FAILURE(status)) {
- return (AE_CTRL_DEPTH);
- }
-
- if (!(flags & ACPI_STA_DEVICE_PRESENT) &&
- !(flags & ACPI_STA_DEVICE_FUNCTIONING)) {
- /*
- * Don't examine the children of the device only when the
- * device is neither present nor functional. See ACPI spec,
- * description of _STA for more information.
- */
- return (AE_CTRL_DEPTH);
- }
-
- /* Filter based on device HID & CID */
-
+ /*
+ * First, filter based on the device HID and CID.
+ *
+ * 01/2010: For this case where a specific HID is requested, we don't
+ * want to run _STA until we have an actual HID match. Thus, we will
+ * not unnecessarily execute _STA on devices for which the caller
+ * doesn't care about. Previously, _STA was executed unconditionally
+ * on all devices found here.
+ *
+ * A side-effect of this change is that now we will continue to search
+ * for a matching HID even under device trees where the parent device
+ * would have returned a _STA that indicates it is not present or
+ * not functioning (thus aborting the search on that branch).
+ */
if (info->hid != NULL) {
status = acpi_ut_execute_HID(node, &hid);
if (status == AE_NOT_FOUND) {
@@ -620,6 +615,25 @@
}
}
+ /* Run _STA to determine if device is present */
+
+ status = acpi_ut_execute_STA(node, &flags);
+ if (ACPI_FAILURE(status)) {
+ return (AE_CTRL_DEPTH);
+ }
+
+ if (!(flags & ACPI_STA_DEVICE_PRESENT) &&
+ !(flags & ACPI_STA_DEVICE_FUNCTIONING)) {
+ /*
+ * Don't examine the children of the device only when the
+ * device is neither present nor functional. See ACPI spec,
+ * description of _STA for more information.
+ */
+ return (AE_CTRL_DEPTH);
+ }
+
+ /* We have a valid device, invoke the user function */
+
status = info->user_function(obj_handle, nesting_level, info->context,
return_value);
return (status);
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index e611dd9..b01e45a 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 0cc6ba0..eafef24 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -6,7 +6,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index b161f35..00493e1 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -403,7 +403,7 @@
/* Get 1 byte from the AML stream */
opcode = AML_BYTE_OP;
- arg->common.value.integer = (acpi_integer) * aml;
+ arg->common.value.integer = (u64) *aml;
length = 1;
break;
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 0988e4a..59aabae 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c
index 3bc3a60..2b0c3be 100644
--- a/drivers/acpi/acpica/psopcode.c
+++ b/drivers/acpi/acpica/psopcode.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 4df8f13..8d81542 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psscope.c b/drivers/acpi/acpica/psscope.c
index 2feca5c..40e2b27 100644
--- a/drivers/acpi/acpica/psscope.c
+++ b/drivers/acpi/acpica/psscope.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c
index 4d33891..d4b970c 100644
--- a/drivers/acpi/acpica/pstree.c
+++ b/drivers/acpi/acpica/pstree.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c
index e636e07..fe29eee 100644
--- a/drivers/acpi/acpica/psutils.c
+++ b/drivers/acpi/acpica/psutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/pswalk.c b/drivers/acpi/acpica/pswalk.c
index 78b8b79..8abb962 100644
--- a/drivers/acpi/acpica/pswalk.c
+++ b/drivers/acpi/acpica/pswalk.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c
index d0c1b91..6064dd4 100644
--- a/drivers/acpi/acpica/psxface.c
+++ b/drivers/acpi/acpica/psxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsaddr.c b/drivers/acpi/acpica/rsaddr.c
index 1e437bf..226c806 100644
--- a/drivers/acpi/acpica/rsaddr.c
+++ b/drivers/acpi/acpica/rsaddr.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index 3c4dcc3..d6ebf7e 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index a3c23d6..f2ee3b5 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -182,7 +182,7 @@
/*
* Loop through the ACPI_INTERNAL_OBJECTS - Each object should be a
- * package that in turn contains an acpi_integer Address, a u8 Pin,
+ * package that in turn contains an u64 Address, a u8 Pin,
* a Name, and a u8 source_index.
*/
top_object_list = package_object->package.elements;
diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c
index 3f0ca5a..f859b03 100644
--- a/drivers/acpi/acpica/rsdump.c
+++ b/drivers/acpi/acpica/rsdump.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsinfo.c b/drivers/acpi/acpica/rsinfo.c
index 77b25fd..1fd868b 100644
--- a/drivers/acpi/acpica/rsinfo.c
+++ b/drivers/acpi/acpica/rsinfo.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsio.c b/drivers/acpi/acpica/rsio.c
index 35a49aa..33bff17 100644
--- a/drivers/acpi/acpica/rsio.c
+++ b/drivers/acpi/acpica/rsio.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsirq.c b/drivers/acpi/acpica/rsirq.c
index 2e02569..545da40 100644
--- a/drivers/acpi/acpica/rsirq.c
+++ b/drivers/acpi/acpica/rsirq.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index 1b1dbc6..fd057c7 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsmemory.c b/drivers/acpi/acpica/rsmemory.c
index ddc76ce..887b8ba 100644
--- a/drivers/acpi/acpica/rsmemory.c
+++ b/drivers/acpi/acpica/rsmemory.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c
index 5bc49a5..07de352 100644
--- a/drivers/acpi/acpica/rsmisc.c
+++ b/drivers/acpi/acpica/rsmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index bc03d59..22cfcfb 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index f27feb4..9f6a6e7 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index c016335..f43fbe0 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c
index 1054dfd..e252180 100644
--- a/drivers/acpi/acpica/tbfind.c
+++ b/drivers/acpi/acpica/tbfind.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index 63e8232..7ec02b0 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 1f15497..02723a9 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index a88f02b..5217a61 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 85ea834..dda6e8c 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c
index 7580f6b..3d706b8 100644
--- a/drivers/acpi/acpica/utalloc.c
+++ b/drivers/acpi/acpica/utalloc.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index f857c5e..97ec362 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 527d729..9835106 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -460,8 +460,7 @@
void
acpi_ut_value_exit(u32 line_number,
const char *function_name,
- const char *module_name,
- u32 component_id, acpi_integer value)
+ const char *module_name, u32 component_id, u64 value)
{
acpi_debug_print(ACPI_LV_FUNCTIONS,
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 96e26e7..16b51c6 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c
index 5d54e36..7f5e734 100644
--- a/drivers/acpi/acpica/uteval.c
+++ b/drivers/acpi/acpica/uteval.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -348,7 +348,7 @@
acpi_status
acpi_ut_evaluate_numeric_object(char *object_name,
struct acpi_namespace_node *device_node,
- acpi_integer *value)
+ u64 *value)
{
union acpi_operand_object *obj_desc;
acpi_status status;
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 3f2c68f..eda3e65 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -234,7 +234,7 @@
*
******************************************************************************/
-char acpi_ut_hex_to_ascii_char(acpi_integer integer, u32 position)
+char acpi_ut_hex_to_ascii_char(u64 integer, u32 position)
{
return (acpi_gbl_hex_to_ascii[(integer >> position) & 0xF]);
diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c
index 52eaae4..1397fad 100644
--- a/drivers/acpi/acpica/utids.c
+++ b/drivers/acpi/acpica/utids.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c
index 9d0919eb..a39c93d 100644
--- a/drivers/acpi/acpica/utinit.c
+++ b/drivers/acpi/acpica/utinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c
index 25e0312..b081cd4 100644
--- a/drivers/acpi/acpica/utlock.c
+++ b/drivers/acpi/acpica/utlock.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c
index c9f682d..35059a1 100644
--- a/drivers/acpi/acpica/utmath.c
+++ b/drivers/acpi/acpica/utmath.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -70,9 +70,8 @@
*
******************************************************************************/
acpi_status
-acpi_ut_short_divide(acpi_integer dividend,
- u32 divisor,
- acpi_integer * out_quotient, u32 * out_remainder)
+acpi_ut_short_divide(u64 dividend,
+ u32 divisor, u64 *out_quotient, u32 *out_remainder)
{
union uint64_overlay dividend_ovl;
union uint64_overlay quotient;
@@ -126,9 +125,8 @@
******************************************************************************/
acpi_status
-acpi_ut_divide(acpi_integer in_dividend,
- acpi_integer in_divisor,
- acpi_integer * out_quotient, acpi_integer * out_remainder)
+acpi_ut_divide(u64 in_dividend,
+ u64 in_divisor, u64 *out_quotient, u64 *out_remainder)
{
union uint64_overlay dividend;
union uint64_overlay divisor;
@@ -199,9 +197,8 @@
* The 64-bit remainder must be generated.
*/
partial1 = quotient.part.lo * divisor.part.hi;
- partial2.full =
- (acpi_integer) quotient.part.lo * divisor.part.lo;
- partial3.full = (acpi_integer) partial2.part.hi + partial1;
+ partial2.full = (u64) quotient.part.lo * divisor.part.lo;
+ partial3.full = (u64) partial2.part.hi + partial1;
remainder.part.hi = partial3.part.lo;
remainder.part.lo = partial2.part.lo;
@@ -257,9 +254,8 @@
*
******************************************************************************/
acpi_status
-acpi_ut_short_divide(acpi_integer in_dividend,
- u32 divisor,
- acpi_integer * out_quotient, u32 * out_remainder)
+acpi_ut_short_divide(u64 in_dividend,
+ u32 divisor, u64 *out_quotient, u32 *out_remainder)
{
ACPI_FUNCTION_TRACE(ut_short_divide);
@@ -284,9 +280,8 @@
}
acpi_status
-acpi_ut_divide(acpi_integer in_dividend,
- acpi_integer in_divisor,
- acpi_integer * out_quotient, acpi_integer * out_remainder)
+acpi_ut_divide(u64 in_dividend,
+ u64 in_divisor, u64 *out_quotient, u64 *out_remainder)
{
ACPI_FUNCTION_TRACE(ut_divide);
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 6c6a513..32982e2 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -724,13 +724,12 @@
*
******************************************************************************/
-acpi_status
-acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
{
u32 this_digit = 0;
- acpi_integer return_value = 0;
- acpi_integer quotient;
- acpi_integer dividend;
+ u64 return_value = 0;
+ u64 quotient;
+ u64 dividend;
u32 to_integer_op = (base == ACPI_ANY_BASE);
u32 mode32 = (acpi_gbl_integer_byte_width == 4);
u8 valid_digits = 0;
@@ -844,9 +843,8 @@
/* Divide the digit into the correct position */
- (void)
- acpi_ut_short_divide((dividend - (acpi_integer) this_digit),
- base, "ient, NULL);
+ (void)acpi_ut_short_divide((dividend - (u64) this_digit),
+ base, "ient, NULL);
if (return_value > quotient) {
if (to_integer_op) {
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 80bb651..55d014e 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -50,7 +50,7 @@
/* Local prototypes */
static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id);
-static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id);
+static void acpi_ut_delete_mutex(acpi_mutex_handle mutex_id);
/*******************************************************************************
*
@@ -114,7 +114,7 @@
/* Delete each predefined mutex object */
for (i = 0; i < ACPI_NUM_MUTEX; i++) {
- (void)acpi_ut_delete_mutex(i);
+ acpi_ut_delete_mutex(i);
}
/* Delete the spinlocks */
@@ -146,10 +146,6 @@
ACPI_FUNCTION_TRACE_U32(ut_create_mutex, mutex_id);
- if (mutex_id > ACPI_MAX_MUTEX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
if (!acpi_gbl_mutex_info[mutex_id].mutex) {
status =
acpi_os_create_mutex(&acpi_gbl_mutex_info[mutex_id].mutex);
@@ -173,21 +169,15 @@
*
******************************************************************************/
-static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
+static void acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
{
ACPI_FUNCTION_TRACE_U32(ut_delete_mutex, mutex_id);
- if (mutex_id > ACPI_MAX_MUTEX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
acpi_os_delete_mutex(acpi_gbl_mutex_info[mutex_id].mutex);
acpi_gbl_mutex_info[mutex_id].mutex = NULL;
acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
-
- return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 42e658b..3356f0c 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 91b7c00..7965919 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c
index 0440c95..d35d109 100644
--- a/drivers/acpi/acpica/utstate.c
+++ b/drivers/acpi/acpica/utstate.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index b1f5f68..db9d8ca 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index cada73f..58d2c91 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -324,8 +324,8 @@
strncpy(ptr, element->string.pointer, 32);
else if (element->type == ACPI_TYPE_INTEGER) {
strncpy(ptr, (u8 *)&element->integer.value,
- sizeof(acpi_integer));
- ptr[sizeof(acpi_integer)] = 0;
+ sizeof(u64));
+ ptr[sizeof(u64)] = 0;
} else
*ptr = 0; /* don't have value */
} else {
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 27e0b92..d7a6bbb 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -597,7 +597,7 @@
static acpi_status
acpi_ec_space_handler(u32 function, acpi_physical_address address,
- u32 bits, acpi_integer *value,
+ u32 bits, u64 *value,
void *handler_context, void *region_context)
{
struct acpi_ec *ec = handler_context;
@@ -628,7 +628,7 @@
++address;
if (function == ACPI_READ) {
result = acpi_ec_read(ec, address, &temp);
- (*value) |= ((acpi_integer)temp) << i;
+ (*value) |= ((u64)temp) << i;
} else {
temp = 0xff & ((*value) >> i);
result = acpi_ec_write(ec, address, temp);
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 4c8fcff..6d5b64b 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -87,7 +87,7 @@
/* Get device's handler per its address under its parent */
struct acpi_find_child {
acpi_handle handle;
- acpi_integer address;
+ u64 address;
};
static acpi_status
@@ -106,7 +106,7 @@
return AE_OK;
}
-acpi_handle acpi_get_child(acpi_handle parent, acpi_integer address)
+acpi_handle acpi_get_child(acpi_handle parent, u64 address)
{
struct acpi_find_child find = { NULL, address };
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 02e8464..8e6d866 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -436,7 +436,7 @@
* Running in interpreter thread context, safe to sleep
*/
-void acpi_os_sleep(acpi_integer ms)
+void acpi_os_sleep(u64 ms)
{
schedule_timeout_interruptible(msecs_to_jiffies(ms));
}
@@ -603,7 +603,7 @@
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
- acpi_integer value, u32 width)
+ u64 value, u32 width)
{
int result, size;
diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c
index dc4ffad..834c5af 100644
--- a/drivers/acpi/power_meter.c
+++ b/drivers/acpi/power_meter.c
@@ -71,17 +71,17 @@
MODULE_DEVICE_TABLE(acpi, power_meter_ids);
struct acpi_power_meter_capabilities {
- acpi_integer flags;
- acpi_integer units;
- acpi_integer type;
- acpi_integer accuracy;
- acpi_integer sampling_time;
- acpi_integer min_avg_interval;
- acpi_integer max_avg_interval;
- acpi_integer hysteresis;
- acpi_integer configurable_cap;
- acpi_integer min_cap;
- acpi_integer max_cap;
+ u64 flags;
+ u64 units;
+ u64 type;
+ u64 accuracy;
+ u64 sampling_time;
+ u64 min_avg_interval;
+ u64 max_avg_interval;
+ u64 hysteresis;
+ u64 configurable_cap;
+ u64 min_cap;
+ u64 max_cap;
};
struct acpi_power_meter_resource {
@@ -93,9 +93,9 @@
acpi_string model_number;
acpi_string serial_number;
acpi_string oem_info;
- acpi_integer power;
- acpi_integer cap;
- acpi_integer avg_interval;
+ u64 power;
+ u64 cap;
+ u64 avg_interval;
int sensors_valid;
unsigned long sensors_last_updated;
struct sensor_device_attribute sensors[NUM_SENSORS];
@@ -402,7 +402,7 @@
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
- acpi_integer val = 0;
+ u64 val = 0;
switch (attr->index) {
case 0:
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cc978a8..37dfce7 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -360,7 +360,7 @@
static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
{
acpi_status status = 0;
- acpi_integer count;
+ u64 count;
int current_count;
int i;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 1c5d7a8..7ded754 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -660,7 +660,7 @@
#ifdef CONFIG_X86
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
- acpi_integer * value)
+ u64 *value)
{
struct cpuinfo_x86 *c;
u64 msr_high, msr_low;
@@ -681,13 +681,13 @@
rdmsr_safe(MSR_IA32_THERM_CONTROL,
(u32 *)&msr_low , (u32 *) &msr_high);
msr = (msr_high << 32) | msr_low;
- *value = (acpi_integer) msr;
+ *value = (u64) msr;
ret = 0;
}
return ret;
}
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
{
struct cpuinfo_x86 *c;
unsigned int cpu;
@@ -711,14 +711,14 @@
}
#else
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
- acpi_integer * value)
+ u64 *value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
return -1;
}
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value)
+static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
@@ -727,7 +727,7 @@
#endif
static int acpi_read_throttling_status(struct acpi_processor *pr,
- acpi_integer *value)
+ u64 *value)
{
u32 bit_width, bit_offset;
u64 ptc_value;
@@ -746,7 +746,7 @@
address, (u32 *) &ptc_value,
(u32) (bit_width + bit_offset));
ptc_mask = (1 << bit_width) - 1;
- *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask);
+ *value = (u64) ((ptc_value >> bit_offset) & ptc_mask);
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
@@ -760,7 +760,7 @@
}
static int acpi_write_throttling_state(struct acpi_processor *pr,
- acpi_integer value)
+ u64 value)
{
u32 bit_width, bit_offset;
u64 ptc_value;
@@ -793,7 +793,7 @@
}
static int acpi_get_throttling_state(struct acpi_processor *pr,
- acpi_integer value)
+ u64 value)
{
int i;
@@ -808,7 +808,7 @@
}
static int acpi_get_throttling_value(struct acpi_processor *pr,
- int state, acpi_integer *value)
+ int state, u64 *value)
{
int ret = -1;
@@ -826,7 +826,7 @@
{
int state = 0;
int ret;
- acpi_integer value;
+ u64 value;
if (!pr)
return -EINVAL;
@@ -993,7 +993,7 @@
int state, bool force)
{
int ret;
- acpi_integer value;
+ u64 value;
if (!pr)
return -EINVAL;
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 811fec1..11882db 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -107,12 +107,12 @@
case ACPI_TYPE_INTEGER:
switch (format_string[i]) {
case 'N':
- size_required += sizeof(acpi_integer);
- tail_offset += sizeof(acpi_integer);
+ size_required += sizeof(u64);
+ tail_offset += sizeof(u64);
break;
case 'S':
size_required +=
- sizeof(char *) + sizeof(acpi_integer) +
+ sizeof(char *) + sizeof(u64) +
sizeof(char);
tail_offset += sizeof(char *);
break;
@@ -193,17 +193,17 @@
case ACPI_TYPE_INTEGER:
switch (format_string[i]) {
case 'N':
- *((acpi_integer *) head) =
+ *((u64 *) head) =
element->integer.value;
- head += sizeof(acpi_integer);
+ head += sizeof(u64);
break;
case 'S':
pointer = (u8 **) head;
*pointer = tail;
- *((acpi_integer *) tail) =
+ *((u64 *) tail) =
element->integer.value;
- head += sizeof(acpi_integer *);
- tail += sizeof(acpi_integer);
+ head += sizeof(u64 *);
+ tail += sizeof(u64);
/* NULL terminate string */
*tail = (char)0;
tail += sizeof(char);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index b765790..6e9b491 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -759,7 +759,7 @@
static int
acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag)
{
- acpi_integer status = 0;
+ u64 status = 0;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 56c6374..01c52c4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -446,9 +446,9 @@
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on ISA && EXPERIMENTAL
+ depends on (ISA || PCI) && EXPERIMENTAL
help
- This option enables support for ISA/VLB bus legacy PATA
+ This option enables support for ISA/VLB/PCI bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
If unsure, say N.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a6a736a..6bd930b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -93,6 +93,9 @@
AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
AHCI_RX_FIS_SZ,
+ AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ +
+ AHCI_CMD_TBL_AR_SZ +
+ (AHCI_RX_FIS_SZ * 16),
AHCI_IRQ_ON_SG = (1 << 31),
AHCI_CMD_ATAPI = (1 << 5),
AHCI_CMD_WRITE = (1 << 6),
@@ -170,6 +173,7 @@
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
+ PORT_FBS = 0x40, /* FIS-based Switching */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
@@ -208,6 +212,7 @@
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
@@ -222,6 +227,14 @@
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
+ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
+ PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
+ PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */
+ PORT_FBS_SDE = (1 << 2), /* FBS single device error */
+ PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
+ PORT_FBS_EN = (1 << 0), /* Enable FBS */
+
/* hpriv->flags bits */
AHCI_HFLAG_NO_NCQ = (1 << 0),
AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
@@ -304,6 +317,9 @@
unsigned int ncq_saw_dmas:1;
unsigned int ncq_saw_sdb:1;
u32 intr_mask; /* interrupts to enable */
+ bool fbs_supported; /* set iff FBS is supported */
+ bool fbs_enabled; /* set iff FBS is enabled */
+ int fbs_last_dev; /* save FBS.DEV of last FIS */
/* enclosure management info per PM slot */
struct ahci_em_priv em_priv[EM_MAX_SLOTS];
};
@@ -315,9 +331,12 @@
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
+static void ahci_enable_fbs(struct ata_port *ap);
+static void ahci_disable_fbs(struct ata_port *ap);
static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
@@ -356,10 +375,10 @@
static ssize_t ahci_show_port_cmd(struct device *dev,
struct device_attribute *attr, char *buf);
-DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
-DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
-DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
-DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
+static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
+static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
+static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
static struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
@@ -390,7 +409,7 @@
static struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
- .qc_defer = sata_pmp_qc_defer_cmd_switch,
+ .qc_defer = ahci_pmp_qc_defer,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.qc_fill_rtf = ahci_qc_fill_rtf,
@@ -570,6 +589,12 @@
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */
+ { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
+ { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -2045,6 +2070,17 @@
return si;
}
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ if (!sata_pmp_attached(ap) || pp->fbs_enabled)
+ return ata_std_qc_defer(qc);
+ else
+ return sata_pmp_qc_defer_cmd_switch(qc);
+}
+
static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -2083,6 +2119,31 @@
ahci_fill_cmd_slot(pp, qc->tag, opts);
}
+static void ahci_fbs_dec_intr(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int retries = 3;
+
+ DPRINTK("ENTER\n");
+ BUG_ON(!pp->fbs_enabled);
+
+ /* time to wait for DEC is not specified by AHCI spec,
+ * add a retry loop for safety.
+ */
+ writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ while ((fbs & PORT_FBS_DEC) && retries--) {
+ udelay(1);
+ fbs = readl(port_mmio + PORT_FBS);
+ }
+
+ if (fbs & PORT_FBS_DEC)
+ dev_printk(KERN_ERR, ap->host->dev,
+ "failed to clear device error\n");
+}
+
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -2091,12 +2152,26 @@
struct ata_link *link = NULL;
struct ata_queued_cmd *active_qc;
struct ata_eh_info *active_ehi;
+ bool fbs_need_dec = false;
u32 serror;
- /* determine active link */
- ata_for_each_link(link, ap, EDGE)
- if (ata_link_active(link))
- break;
+ /* determine active link with error */
+ if (pp->fbs_enabled) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int pmp = fbs >> PORT_FBS_DWE_OFFSET;
+
+ if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
+ ata_link_online(&ap->pmp_link[pmp])) {
+ link = &ap->pmp_link[pmp];
+ fbs_need_dec = true;
+ }
+
+ } else
+ ata_for_each_link(link, ap, EDGE)
+ if (ata_link_active(link))
+ break;
+
if (!link)
link = &ap->link;
@@ -2153,8 +2228,13 @@
}
if (irq_stat & PORT_IRQ_IF_ERR) {
- host_ehi->err_mask |= AC_ERR_ATA_BUS;
- host_ehi->action |= ATA_EH_RESET;
+ if (fbs_need_dec)
+ active_ehi->err_mask |= AC_ERR_DEV;
+ else {
+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ }
+
ata_ehi_push_desc(host_ehi, "interface fatal error");
}
@@ -2169,7 +2249,10 @@
if (irq_stat & PORT_IRQ_FREEZE)
ata_port_freeze(ap);
- else
+ else if (fbs_need_dec) {
+ ata_link_abort(link);
+ ahci_fbs_dec_intr(ap);
+ } else
ata_port_abort(ap);
}
@@ -2222,12 +2305,19 @@
/* If the 'N' bit in word 0 of the FIS is set,
* we just received asynchronous notification.
* Tell libata about it.
+ *
+ * Lack of SNotification should not appear in
+ * ahci 1.2, so the workaround is unnecessary
+ * when FBS is enabled.
*/
- const __le32 *f = pp->rx_fis + RX_FIS_SDB;
- u32 f0 = le32_to_cpu(f[0]);
-
- if (f0 & (1 << 15))
- sata_async_notification(ap);
+ if (pp->fbs_enabled)
+ WARN_ON_ONCE(1);
+ else {
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+ u32 f0 = le32_to_cpu(f[0]);
+ if (f0 & (1 << 15))
+ sata_async_notification(ap);
+ }
}
}
@@ -2321,6 +2411,15 @@
if (qc->tf.protocol == ATA_PROT_NCQ)
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+
+ if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+ fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(fbs, port_mmio + PORT_FBS);
+ pp->fbs_last_dev = qc->dev->link->pmp;
+ }
+
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
ahci_sw_activity(qc->dev->link);
@@ -2333,6 +2432,9 @@
struct ahci_port_priv *pp = qc->ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ if (pp->fbs_enabled)
+ d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
+
ata_tf_from_fis(d2h_fis, &qc->result_tf);
return true;
}
@@ -2381,6 +2483,71 @@
ahci_kick_engine(ap);
}
+static void ahci_enable_fbs(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ return;
+ }
+
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ } else
+ dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
+
+ ahci_start_engine(ap);
+}
+
+static void ahci_disable_fbs(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if ((fbs & PORT_FBS_EN) == 0) {
+ pp->fbs_enabled = false;
+ return;
+ }
+
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN)
+ dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
+ else {
+ dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
+ pp->fbs_enabled = false;
+ }
+
+ ahci_start_engine(ap);
+}
+
static void ahci_pmp_attach(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
@@ -2391,6 +2558,8 @@
cmd |= PORT_CMD_PMP;
writel(cmd, port_mmio + PORT_CMD);
+ ahci_enable_fbs(ap);
+
pp->intr_mask |= PORT_IRQ_BAD_PMP;
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
}
@@ -2401,6 +2570,8 @@
struct ahci_port_priv *pp = ap->private_data;
u32 cmd;
+ ahci_disable_fbs(ap);
+
cmd = readl(port_mmio + PORT_CMD);
cmd &= ~PORT_CMD_PMP;
writel(cmd, port_mmio + PORT_CMD);
@@ -2492,20 +2663,40 @@
static int ahci_port_start(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct device *dev = ap->host->dev;
struct ahci_port_priv *pp;
void *mem;
dma_addr_t mem_dma;
+ size_t dma_sz, rx_fis_sz;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
- mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
- GFP_KERNEL);
+ /* check FBS capability */
+ if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd = readl(port_mmio + PORT_CMD);
+ if (cmd & PORT_CMD_FBSCP)
+ pp->fbs_supported = true;
+ else
+ dev_printk(KERN_WARNING, dev,
+ "The port is not capable of FBS\n");
+ }
+
+ if (pp->fbs_supported) {
+ dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ * 16;
+ } else {
+ dma_sz = AHCI_PORT_PRIV_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ;
+ }
+
+ mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
if (!mem)
return -ENOMEM;
- memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
+ memset(mem, 0, dma_sz);
/*
* First item in chunk of DMA memory: 32-slot command table,
@@ -2523,8 +2714,8 @@
pp->rx_fis = mem;
pp->rx_fis_dma = mem_dma;
- mem += AHCI_RX_FIS_SZ;
- mem_dma += AHCI_RX_FIS_SZ;
+ mem += rx_fis_sz;
+ mem_dma += rx_fis_sz;
/*
* Third item: data area for storing a single command
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 12e26c3..33fb614 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -155,7 +155,7 @@
return rc;
pcim_pin_device(dev);
}
- return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 6f3f225..c338066 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -173,6 +173,7 @@
unsigned int reg, u32 *val);
static int piix_sidpr_scr_write(struct ata_link *link,
unsigned int reg, u32 val);
+static bool piix_irq_check(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -291,6 +292,14 @@
{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (CPT) */
+ { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
@@ -309,8 +318,13 @@
ATA_BMDMA_SHT(DRV_NAME),
};
-static struct ata_port_operations piix_pata_ops = {
+static struct ata_port_operations piix_sata_ops = {
.inherits = &ata_bmdma32_port_ops,
+ .sff_irq_check = piix_irq_check,
+};
+
+static struct ata_port_operations piix_pata_ops = {
+ .inherits = &piix_sata_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
@@ -328,10 +342,6 @@
.set_dmamode = ich_set_dmamode,
};
-static struct ata_port_operations piix_sata_ops = {
- .inherits = &ata_bmdma32_port_ops,
-};
-
static struct ata_port_operations piix_sidpr_sata_ops = {
.inherits = &piix_sata_ops,
.hardreset = sata_std_hardreset,
@@ -962,6 +972,14 @@
return 0;
}
+static bool piix_irq_check(struct ata_port *ap)
+{
+ if (unlikely(!ap->ioaddr.bmdma_addr))
+ return false;
+
+ return ap->ops->bmdma_status(ap) & ATA_DMA_INTR;
+}
+
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 1245838..292fdbc 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -64,7 +64,7 @@
WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
if (!sata_pmp_attached(ap)) {
- acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+ u64 adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
ap->link.device->acpi_handle =
acpi_get_child(ap->host->acpi_handle, adr);
@@ -74,7 +74,7 @@
ap->link.device->acpi_handle = NULL;
ata_for_each_link(link, ap, EDGE) {
- acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
+ u64 adr = SATA_ADR(ap->port_no, link->pmp);
link->device->acpi_handle =
acpi_get_child(ap->host->acpi_handle, adr);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6728328..9c77b0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3211,6 +3211,7 @@
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing *t, int T, int UT)
{
+ const u16 *id = adev->id;
const struct ata_timing *s;
struct ata_timing p;
@@ -3228,14 +3229,18 @@
* PIO/MW_DMA cycle timing.
*/
- if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
+
if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
- if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
- else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
- } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
- p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
- }
+ if (speed <= XFER_PIO_2)
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+ else if ((speed <= XFER_PIO_4) ||
+ (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+ } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+ p.cycle = id[ATA_ID_EIDE_DMA_MIN];
+
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d096fbc..bea003a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1097,7 +1097,7 @@
dev->flags |= ATA_DFLAG_NO_UNLOAD;
/* configure max sectors */
- blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
+ blk_queue_max_hw_sectors(sdev->request_queue, dev->max_sectors);
if (dev->class == ATA_DEV_ATAPI) {
struct request_queue *q = sdev->request_queue;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 730ef3c..02441fd5 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1763,24 +1763,50 @@
{
struct ata_host *host = dev_instance;
unsigned int i;
- unsigned int handled = 0;
+ unsigned int handled = 0, polling = 0;
unsigned long flags;
/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
spin_lock_irqsave(&host->lock, flags);
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
+ if (unlikely(ap->flags & ATA_FLAG_DISABLED))
+ continue;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE))
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc) {
+ if (!(qc->tf.flags & ATA_TFLAG_POLLING))
handled |= ata_sff_host_intr(ap, qc);
+ else
+ polling |= 1 << i;
+ }
+ }
+
+ /*
+ * If no port was expecting IRQ but the controller is actually
+ * asserting IRQ line, nobody cared will ensue. Check IRQ
+ * pending status if available and clear spurious IRQ.
+ */
+ if (!handled) {
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (polling & (1 << i))
+ continue;
+
+ if (!ap->ops->sff_irq_check ||
+ !ap->ops->sff_irq_check(ap))
+ continue;
+
+ if (printk_ratelimit())
+ ata_port_printk(ap, KERN_INFO,
+ "clearing spurious IRQ\n");
+
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
}
}
@@ -3011,6 +3037,7 @@
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
* @host_priv: host private_data
+ * @hflag: host flags
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
@@ -3031,8 +3058,8 @@
* Zero on success, negative on errno-based value on error.
*/
int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const *ppi,
- struct scsi_host_template *sht, void *host_priv)
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv, int hflag)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
@@ -3067,6 +3094,7 @@
if (rc)
goto out;
host->private_data = host_priv;
+ host->flags |= hflag;
pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index d8f35fe..294f302 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -259,7 +259,7 @@
return rc;
pcim_pin_device(pdev);
}
- return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 9434114..dc61b72 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -159,8 +159,7 @@
* ali_program_modes - load mode registers
* @ap: ALi channel to load
* @adev: Device the timing is for
- * @cmd: Command timing
- * @data: Data timing
+ * @t: timing data
* @ultra: UDMA timing or zero for off
*
* Loads the timing registers for cmd/data and disable UDMA if
@@ -202,8 +201,7 @@
* @ap: ATA interface
* @adev: ATA device
*
- * Program the ALi registers for PIO mode. FIXME: add timings for
- * PIO5.
+ * Program the ALi registers for PIO mode.
*/
static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -237,7 +235,7 @@
* @ap: ATA interface
* @adev: ATA device
*
- * FIXME: MWDMA timings
+ * Program the ALi registers for DMA mode.
*/
static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
@@ -585,7 +583,7 @@
ppi[0] = &info_20_udma;
}
- return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 567f3f7..d95eca9 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -574,7 +574,7 @@
}
/* And fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
+ return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d332cfd..4d066d6 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -421,7 +421,7 @@
BUG_ON(ppi[0] == NULL);
- return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 41c94b1..376dd38 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -153,8 +153,8 @@
/* Compute ATA timing and set it to SMC */
ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
if (ret) {
- dev_warn(ap->dev, "Failed to compute ATA timing %d, \
- set PIO_0 timing\n", ret);
+ dev_warn(ap->dev, "Failed to compute ATA timing %d, "
+ "set PIO_0 timing\n", ret);
set_smc_timing(ap->dev, info, &initial_timing);
} else {
set_smc_timing(ap->dev, info, &timing);
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index ae4454d..cbaf2ed 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,7 +1,7 @@
/*
* pata_atiixp.c - ATI PATA for new ATA layer
* (C) 2005 Red Hat Inc
- * (C) 2009 Bartlomiej Zolnierkiewicz
+ * (C) 2009-2010 Bartlomiej Zolnierkiewicz
*
* Based on
*
@@ -46,6 +46,8 @@
return ATA_CBL_PATA40;
}
+static DEFINE_SPINLOCK(atiixp_lock);
+
/**
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
@@ -88,7 +90,10 @@
static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ unsigned long flags;
+ spin_lock_irqsave(&atiixp_lock, flags);
atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
}
/**
@@ -108,6 +113,9 @@
int dma = adev->dma_mode;
int dn = 2 * ap->port_no + adev->devno;
int wanted_pio;
+ unsigned long flags;
+
+ spin_lock_irqsave(&atiixp_lock, flags);
if (adev->dma_mode >= XFER_UDMA_0) {
u16 udma_mode_data;
@@ -145,6 +153,7 @@
if (adev->pio_mode != wanted_pio)
atiixp_set_pio_timing(ap, adev, wanted_pio);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
}
/**
@@ -237,7 +246,8 @@
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
ppi[i] = &ata_dummy_port_info;
- return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 5acf9fa..6cd5d5d 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -223,7 +223,7 @@
cmd640_hardware_init(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 0efb1f5..4c81a71 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -2,6 +2,7 @@
* pata_cmd64x.c - CMD64x PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
+ * (C) 2009-2010 Bartlomiej Zolnierkiewicz
*
* Based upon
* linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
@@ -39,11 +40,7 @@
enum {
CFR = 0x50,
- CFR_INTR_CH0 = 0x02,
- CNTRL = 0x51,
- CNTRL_DIS_RA0 = 0x40,
- CNTRL_DIS_RA1 = 0x80,
- CNTRL_ENA_2ND = 0x08,
+ CFR_INTR_CH0 = 0x04,
CMDTIM = 0x52,
ARTTIM0 = 0x53,
DRWTIM0 = 0x54,
@@ -53,9 +50,6 @@
ARTTIM23_DIS_RA2 = 0x04,
ARTTIM23_DIS_RA3 = 0x08,
ARTTIM23_INTR_CH1 = 0x10,
- ARTTIM2 = 0x57,
- ARTTIM3 = 0x57,
- DRWTIM23 = 0x58,
DRWTIM2 = 0x58,
BRST = 0x59,
DRWTIM3 = 0x5b,
@@ -63,14 +57,11 @@
MRDMODE = 0x71,
MRDMODE_INTR_CH0 = 0x04,
MRDMODE_INTR_CH1 = 0x08,
- MRDMODE_BLK_CH0 = 0x10,
- MRDMODE_BLK_CH1 = 0x20,
BMIDESR0 = 0x72,
UDIDETCR0 = 0x73,
DTPR0 = 0x74,
BMIDECR1 = 0x78,
BMIDECSR = 0x79,
- BMIDESR1 = 0x7A,
UDIDETCR1 = 0x7B,
DTPR1 = 0x7C
};
@@ -130,8 +121,14 @@
if (pair) {
struct ata_timing tp;
+
ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ if (pair->dma_mode) {
+ ata_timing_compute(pair, pair->dma_mode,
+ &tp, T, 0);
+ ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP);
+ }
}
}
@@ -147,7 +144,9 @@
/* Now convert the clocks into values we can actually stuff into
the chip */
- if (t.recover > 1)
+ if (t.recover == 16)
+ t.recover = 0;
+ else if (t.recover > 1)
t.recover--;
else
t.recover = 15;
@@ -245,7 +244,7 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 dma_intr;
int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_reg = ap->port_no ? ARTTIM2 : CFR;
+ int dma_reg = ap->port_no ? ARTTIM23 : CFR;
ata_bmdma_stop(qc);
@@ -368,7 +367,7 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index c974b05..738ad2e1 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -324,7 +324,7 @@
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 71cef9a..a02e645 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -100,7 +100,7 @@
static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u16 pio_timings[5] = {
- 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
+ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
};
static const u16 pio_cmd_timings[5] = {
0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
@@ -198,7 +198,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index ffee397..914ae35 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -260,7 +260,7 @@
return -ENODEV;
}
- return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 8fb040b..0fcc096 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -62,14 +62,16 @@
return;
}
- time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
- time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
+ time_16 = clamp_val(t.recover - 1, 0, 15) |
+ (clamp_val(t.active - 1, 0, 15) << 4);
+ time_8 = clamp_val(t.act8b - 1, 0, 15) |
+ (clamp_val(t.rec8b - 1, 0, 15) << 4);
if (adev->devno == 0) {
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0x0F; /* Mask bits */
- addr |= clamp_val(t.setup, 0, 15);
+ addr |= clamp_val(t.setup - 1, 0, 15);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@@ -79,7 +81,7 @@
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0xF0; /* Mask bits */
- addr |= (clamp_val(t.setup, 0, 15) << 4);
+ addr |= (clamp_val(t.setup - 1, 0, 15) << 4);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
@@ -136,7 +138,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index b2e71e6..3bac0e0 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -2,7 +2,7 @@
* pata_efar.c - EFAR PIIX clone controller driver
*
* (C) 2005 Red Hat
- * (C) 2009 Bartlomiej Zolnierkiewicz
+ * (C) 2009-2010 Bartlomiej Zolnierkiewicz
*
* Some parts based on ata_piix.c by Jeff Garzik and others.
*
@@ -68,6 +68,8 @@
return ATA_CBL_PATA80;
}
+static DEFINE_SPINLOCK(efar_lock);
+
/**
* efar_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
@@ -84,7 +86,9 @@
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+ unsigned long flags;
u16 idetm_data;
+ u8 udma_enable;
int control = 0;
/*
@@ -107,6 +111,8 @@
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE */
+ spin_lock_irqsave(&efar_lock, flags);
+
pci_read_config_word(dev, idetm_port, &idetm_data);
/* Set PPE, IE, and TIME as appropriate */
@@ -131,6 +137,11 @@
idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+ udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
+ pci_write_config_byte(dev, 0x48, udma_enable);
+ spin_unlock_irqrestore(&efar_lock, flags);
}
/**
@@ -151,6 +162,7 @@
u16 master_data;
u8 speed = adev->dma_mode;
int devid = adev->devno + 2 * ap->port_no;
+ unsigned long flags;
u8 udma_enable;
static const /* ISP RTC */
@@ -160,6 +172,8 @@
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&efar_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -217,6 +231,7 @@
pci_write_config_word(dev, master_port, master_data);
}
pci_write_config_byte(dev, 0x48, udma_enable);
+ spin_unlock_irqrestore(&efar_lock, flags);
}
static struct scsi_host_template efar_sht = {
@@ -256,13 +271,14 @@
.udma_mask = ATA_UDMA4,
.port_ops = &efar_ops,
};
- const struct ata_port_info *ppi[] = { &info, NULL };
+ const struct ata_port_info *ppi[] = { &info, &info };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 0bd48e8..af49bfb 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -11,9 +11,7 @@
*
*
* TODO
- * Maybe PLL mode
- * Look into engine reset on timeout errors. Should not be
- * required.
+ * Look into engine reset on timeout errors. Should not be required.
*/
@@ -27,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.7"
+#define DRV_VERSION "0.6.8"
struct hpt_clock {
u8 xfer_mode;
@@ -207,17 +205,8 @@
{
struct hpt_clock *clocks = ap->host->private_data;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- u32 addr2 = 0x51 + 4 * ap->port_no;
+ u32 addr = 0x40 + 4 * adev->devno;
u32 mask, reg;
- u8 fast;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- if (fast & 0x80) {
- fast &= ~0x80;
- pci_write_config_byte(pdev, addr2, fast);
- }
/* determine timing mask and find matching clock entry */
if (mode < XFER_MW_DMA_0)
@@ -240,9 +229,9 @@
* on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid
* problems handling I/O errors later.
*/
- pci_read_config_dword(pdev, addr1, ®);
+ pci_read_config_dword(pdev, addr, ®);
reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
- pci_write_config_dword(pdev, addr1, reg);
+ pci_write_config_dword(pdev, addr, reg);
}
/**
@@ -372,7 +361,7 @@
break;
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
+ return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4224cfc..8839307a 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.14"
+#define DRV_VERSION "0.6.15"
struct hpt_clock {
u8 xfer_speed;
@@ -39,25 +39,24 @@
/* key for bus clock timings
* bit
- * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
* register access.
- * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
* register access.
- * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- * during task file register access.
- * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- * xfer.
- * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
+ * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock.
+ * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
* register access.
- * 28 UDMA enable
- * 29 DMA enable
- * 30 PIO_MST enable. if set, the chip is in bus master mode during
- * PIO.
- * 31 FIFO enable.
+ * 28 UDMA enable.
+ * 29 DMA enable.
+ * 30 PIO_MST enable. If set, the chip is in bus master mode during
+ * PIO xfer.
+ * 31 FIFO enable. Only for PIO.
*/
static struct hpt_clock hpt37x_timings_33[] = {
@@ -384,6 +383,37 @@
return ata_sff_prereset(link, deadline);
}
+static void hpt370_set_mode(struct ata_port *ap, struct ata_device *adev,
+ u8 mode)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 addr1, addr2;
+ u32 reg, timing, mask;
+ u8 fast;
+
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
+
+ /* Fast interrupt prediction disable, hold off interrupt disable */
+ pci_read_config_byte(pdev, addr2, &fast);
+ fast &= ~0x02;
+ fast |= 0x01;
+ pci_write_config_byte(pdev, addr2, fast);
+
+ /* Determine timing mask and find matching mode entry */
+ if (mode < XFER_MW_DMA_0)
+ mask = 0xcfc3ffff;
+ else if (mode < XFER_UDMA_0)
+ mask = 0x31c001ff;
+ else
+ mask = 0x303c0000;
+
+ timing = hpt37x_find_mode(ap, mode);
+
+ pci_read_config_dword(pdev, addr1, ®);
+ reg = (reg & ~mask) | (timing & mask);
+ pci_write_config_dword(pdev, addr1, reg);
+}
/**
* hpt370_set_piomode - PIO setup
* @ap: ATA interface
@@ -394,26 +424,7 @@
static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg;
- u32 mode;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x02;
- fast |= 0x01;
- pci_write_config_byte(pdev, addr2, fast);
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt37x_find_mode(ap, adev->pio_mode);
- mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
- reg &= ~0xCFC3FFFF; /* Strip timing bits */
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt370_set_mode(ap, adev, adev->pio_mode);
}
/**
@@ -421,33 +432,12 @@
* @ap: ATA interface
* @adev: Device being configured
*
- * Set up the channel for MWDMA or UDMA modes. Much the same as with
- * PIO, load the mode number and then set MWDMA or UDMA flag.
+ * Set up the channel for MWDMA or UDMA modes.
*/
static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg, mode, mask;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x02;
- fast |= 0x01;
- pci_write_config_byte(pdev, addr2, fast);
-
- mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt37x_find_mode(ap, adev->dma_mode);
- mode &= mask;
- reg &= ~mask;
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt370_set_mode(ap, adev, adev->dma_mode);
}
/**
@@ -461,24 +451,25 @@
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 dma_stat = ioread8(ap->ioaddr.bmdma_addr + 2);
- u8 dma_cmd;
void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+ u8 dma_stat = ioread8(bmdma + ATA_DMA_STATUS);
+ u8 dma_cmd;
- if (dma_stat & 0x01) {
+ if (dma_stat & ATA_DMA_ACTIVE) {
udelay(20);
- dma_stat = ioread8(bmdma + 2);
+ dma_stat = ioread8(bmdma + ATA_DMA_STATUS);
}
- if (dma_stat & 0x01) {
+ if (dma_stat & ATA_DMA_ACTIVE) {
/* Clear the engine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(10);
/* Stop DMA */
- dma_cmd = ioread8(bmdma );
- iowrite8(dma_cmd & 0xFE, bmdma);
+ dma_cmd = ioread8(bmdma + ATA_DMA_CMD);
+ iowrite8(dma_cmd & ~ATA_DMA_START, bmdma + ATA_DMA_CMD);
/* Clear Error */
- dma_stat = ioread8(bmdma + 2);
- iowrite8(dma_stat | 0x06 , bmdma + 2);
+ dma_stat = ioread8(bmdma + ATA_DMA_STATUS);
+ iowrite8(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR,
+ bmdma + ATA_DMA_STATUS);
/* Clear the engine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(10);
@@ -486,6 +477,37 @@
ata_bmdma_stop(qc);
}
+static void hpt372_set_mode(struct ata_port *ap, struct ata_device *adev,
+ u8 mode)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 addr1, addr2;
+ u32 reg, timing, mask;
+ u8 fast;
+
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
+
+ /* Fast interrupt prediction disable, hold off interrupt disable */
+ pci_read_config_byte(pdev, addr2, &fast);
+ fast &= ~0x07;
+ pci_write_config_byte(pdev, addr2, fast);
+
+ /* Determine timing mask and find matching mode entry */
+ if (mode < XFER_MW_DMA_0)
+ mask = 0xcfc3ffff;
+ else if (mode < XFER_UDMA_0)
+ mask = 0x31c001ff;
+ else
+ mask = 0x303c0000;
+
+ timing = hpt37x_find_mode(ap, mode);
+
+ pci_read_config_dword(pdev, addr1, ®);
+ reg = (reg & ~mask) | (timing & mask);
+ pci_write_config_dword(pdev, addr1, reg);
+}
+
/**
* hpt372_set_piomode - PIO setup
* @ap: ATA interface
@@ -496,27 +518,7 @@
static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg;
- u32 mode;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x07;
- pci_write_config_byte(pdev, addr2, fast);
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt37x_find_mode(ap, adev->pio_mode);
-
- printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
- mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
- reg &= ~0xCFC3FFFF; /* Strip timing bits */
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt372_set_mode(ap, adev, adev->pio_mode);
}
/**
@@ -524,33 +526,12 @@
* @ap: ATA interface
* @adev: Device being configured
*
- * Set up the channel for MWDMA or UDMA modes. Much the same as with
- * PIO, load the mode number and then set MWDMA or UDMA flag.
+ * Set up the channel for MWDMA or UDMA modes.
*/
static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg, mode, mask;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x07;
- pci_write_config_byte(pdev, addr2, fast);
-
- mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt37x_find_mode(ap, adev->dma_mode);
- printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
- mode &= mask;
- reg &= ~mask;
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt372_set_mode(ap, adev, adev->dma_mode);
}
/**
@@ -1006,7 +987,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
+ return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index dd26bc7..01457b2 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.3.10"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -45,25 +45,24 @@
/* key for bus clock timings
* bit
- * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
* register access.
- * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
* register access.
- * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- * during task file register access.
- * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- * xfer.
- * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
+ * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock.
+ * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
* register access.
- * 28 UDMA enable
- * 29 DMA enable
- * 30 PIO_MST enable. if set, the chip is in bus master mode during
- * PIO.
- * 31 FIFO enable.
+ * 28 UDMA enable.
+ * 29 DMA enable.
+ * 30 PIO_MST enable. If set, the chip is in bus master mode during
+ * PIO xfer.
+ * 31 FIFO enable. Only for PIO.
*/
/* 66MHz DPLL clocks */
@@ -161,6 +160,37 @@
return ata_sff_prereset(link, deadline);
}
+static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev,
+ u8 mode)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 addr1, addr2;
+ u32 reg, timing, mask;
+ u8 fast;
+
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
+
+ /* Fast interrupt prediction disable, hold off interrupt disable */
+ pci_read_config_byte(pdev, addr2, &fast);
+ fast &= ~0x07;
+ pci_write_config_byte(pdev, addr2, fast);
+
+ /* Determine timing mask and find matching mode entry */
+ if (mode < XFER_MW_DMA_0)
+ mask = 0xcfc3ffff;
+ else if (mode < XFER_UDMA_0)
+ mask = 0x31c001ff;
+ else
+ mask = 0x303c0000;
+
+ timing = hpt3x2n_find_mode(ap, mode);
+
+ pci_read_config_dword(pdev, addr1, ®);
+ reg = (reg & ~mask) | (timing & mask);
+ pci_write_config_dword(pdev, addr1, reg);
+}
+
/**
* hpt3x2n_set_piomode - PIO setup
* @ap: ATA interface
@@ -171,25 +201,7 @@
static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg;
- u32 mode;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x07;
- pci_write_config_byte(pdev, addr2, fast);
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt3x2n_find_mode(ap, adev->pio_mode);
- mode &= 0xCFC3FFFF; /* Leave DMA bits alone */
- reg &= ~0xCFC3FFFF; /* Strip timing bits */
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt3x2n_set_mode(ap, adev, adev->pio_mode);
}
/**
@@ -197,32 +209,12 @@
* @ap: ATA interface
* @adev: Device being configured
*
- * Set up the channel for MWDMA or UDMA modes. Much the same as with
- * PIO, load the mode number and then set MWDMA or UDMA flag.
+ * Set up the channel for MWDMA or UDMA modes.
*/
static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u32 addr1, addr2;
- u32 reg, mode, mask;
- u8 fast;
-
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
- addr2 = 0x51 + 4 * ap->port_no;
-
- /* Fast interrupt prediction disable, hold off interrupt disable */
- pci_read_config_byte(pdev, addr2, &fast);
- fast &= ~0x07;
- pci_write_config_byte(pdev, addr2, fast);
-
- mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
-
- pci_read_config_dword(pdev, addr1, ®);
- mode = hpt3x2n_find_mode(ap, adev->dma_mode);
- mode &= mask;
- reg &= ~mask;
- pci_write_config_dword(pdev, addr1, reg | mode);
+ hpt3x2n_set_mode(ap, adev, adev->dma_mode);
}
/**
@@ -544,19 +536,19 @@
pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
- if (pci_mhz > 60) {
+ if (pci_mhz > 60)
hpriv = (void *)(PCI66 | USE_DPLL);
- /*
- * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
- * the MISC. register to stretch the UltraDMA Tss timing.
- * NOTE: This register is only writeable via I/O space.
- */
- if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
- outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
- }
+
+ /*
+ * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+ * the MISC. register to stretch the UltraDMA Tss timing.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
+ outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
+ return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 8f3325a..f971f0d 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -273,7 +273,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index edc5c1f..9bde1cb 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -932,7 +932,7 @@
else
ppi[0] = &info_smart;
}
- return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 3a1474a..565e01e 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -144,7 +144,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 950da39..e8ca02e 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -147,13 +147,13 @@
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
-#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+#if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE)
if (!marvell_pata_active(pdev)) {
printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
return -ENODEV;
}
#endif
- return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index f0d52f7..94f979a 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -82,7 +82,7 @@
ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
+ return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index ca53fac..2110863 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -148,7 +148,7 @@
.port_ops = &ns87410_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0);
}
static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 061aa1c..830431f 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -380,7 +380,7 @@
ns87415_fixup(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 9a8687d..5f6aba7 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -248,7 +248,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 99eddda..00c5a02 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -172,7 +172,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL, 0);
}
static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 86885a4..76b7d12 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -429,7 +429,7 @@
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 1b392c9..3610353 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -136,7 +136,7 @@
*
*/
-void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
{
int count;
struct ata_port *ap;
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 2f3c9be..9ac0897 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -2,7 +2,7 @@
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
- * (C) 2007,2009 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
@@ -35,6 +35,15 @@
return ATA_CBL_PATA80;
}
+static void pdc202xx_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+ iowrite8(tf->command, ap->ioaddr.command_addr);
+ ndelay(400);
+}
+
/**
* pdc202xx_configure_piomode - set chip PIO timing
* @ap: ATA interface
@@ -271,6 +280,8 @@
.cable_detect = ata_cable_40wire,
.set_piomode = pdc202xx_set_piomode,
.set_dmamode = pdc202xx_set_dmamode,
+
+ .sff_exec_command = pdc202xx_exec_command,
};
static struct ata_port_operations pdc2026x_port_ops = {
@@ -284,6 +295,8 @@
.dev_config = pdc2026x_dev_config,
.port_start = pdc2026x_port_start,
+
+ .sff_exec_command = pdc202xx_exec_command,
};
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@@ -324,7 +337,7 @@
return -ENODEV;
}
}
- return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index bfe0180..9816154 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -95,7 +95,7 @@
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
/* Just one port for the moment */
- return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0);
}
static struct pci_device_id ata_tosh[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 4fd25e7..fc96022 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -227,7 +227,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 2932998..4a454a8 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -95,7 +95,7 @@
printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
- return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0);
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 3bbed83..dfecc6f 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -237,7 +237,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index beaed12..9524d54 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,6 +1,7 @@
/*
* pata_serverworks.c - Serverworks PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2010 Bartlomiej Zolnierkiewicz
*
* based upon
*
@@ -253,7 +254,7 @@
if (serverworks_is_csb(pdev)) {
pci_read_config_word(pdev, 0x4A, &csb5_pio);
csb5_pio &= ~(0x0F << devbits);
- pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits));
+ pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits));
}
}
@@ -327,7 +328,7 @@
pci_dev_put(isa_dev);
return 0;
}
- printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n");
+ printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n");
return -ENODEV;
}
@@ -459,7 +460,7 @@
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_bmdma_clear_simplex(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index a2ace48..c6c589c 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -356,7 +356,7 @@
IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 5c30d56..b670803 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -826,7 +826,7 @@
sis_fixup(pdev, chipset);
- return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
+ return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 29f733c..733b042 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -316,7 +316,7 @@
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index f1f13ff..48f5060 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -201,7 +201,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 0d97890..3059ec0 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -22,6 +22,7 @@
* VIA VT8233c - UDMA100
* VIA VT8235 - UDMA133
* VIA VT8237 - UDMA133
+ * VIA VT8237A - UDMA133
* VIA VT8237S - UDMA133
* VIA VT8251 - UDMA133
*
@@ -64,26 +65,15 @@
#define DRV_NAME "pata_via"
#define DRV_VERSION "0.3.4"
-/*
- * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
- * driver.
- */
-
enum {
- VIA_UDMA = 0x007,
- VIA_UDMA_NONE = 0x000,
- VIA_UDMA_33 = 0x001,
- VIA_UDMA_66 = 0x002,
- VIA_UDMA_100 = 0x003,
- VIA_UDMA_133 = 0x004,
- VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */
- VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */
- VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */
- VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */
- VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */
- VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */
- VIA_NO_ENABLES = 0x400, /* Has no enablebits */
- VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */
+ VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */
+ VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */
+ VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */
+ VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */
+ VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */
+ VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */
+ VIA_NO_ENABLES = 0x40, /* Has no enablebits */
+ VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */
};
enum {
@@ -99,40 +89,37 @@
u16 id;
u8 rev_min;
u8 rev_max;
- u16 flags;
+ u8 udma_mask;
+ u8 flags;
} via_isa_bridges[] = {
- { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f,
- VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
- { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 |
- VIA_BAD_AST | VIA_SATA_PATA },
- { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f,
- VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
- { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
- { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
- { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 },
- { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
- { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
- { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
- { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
- { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
- { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
- { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f,
- VIA_UDMA_133 | VIA_BAD_AST },
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ NULL }
};
@@ -191,10 +178,10 @@
return ATA_CBL_SATA;
/* Early chips are 40 wire */
- if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
+ if (config->udma_mask < ATA_UDMA4)
return ATA_CBL_PATA40;
/* UDMA 66 chips have only drive side logic */
- else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
+ else if (config->udma_mask < ATA_UDMA5)
return ATA_CBL_PATA_UNK;
/* UDMA 100 or later */
pci_read_config_dword(pdev, 0x50, &ata66);
@@ -229,11 +216,10 @@
/**
- * via_do_set_mode - set initial PIO mode data
+ * via_do_set_mode - set transfer mode data
* @ap: ATA interface
* @adev: ATA device
* @mode: ATA mode being programmed
- * @tdiv: Clocks per PCI clock
* @set_ast: Set to program address setup
* @udma_type: UDMA mode/format of registers
*
@@ -244,17 +230,27 @@
* on the two channels.
*/
-static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type)
+static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev,
+ int mode, int set_ast, int udma_type)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct ata_device *peer = ata_dev_pair(adev);
struct ata_timing t, p;
- static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */
+ static int via_clock = 33333; /* Bus clock in kHZ */
unsigned long T = 1000000000 / via_clock;
- unsigned long UT = T/tdiv;
+ unsigned long UT = T;
int ut;
int offset = 3 - (2*ap->port_no) - adev->devno;
+ switch (udma_type) {
+ case ATA_UDMA4:
+ UT = T / 2; break;
+ case ATA_UDMA5:
+ UT = T / 3; break;
+ case ATA_UDMA6:
+ UT = T / 4; break;
+ }
+
/* Calculate the timing values we require */
ata_timing_compute(adev, mode, &t, T, UT);
@@ -273,7 +269,7 @@
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
- setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ setup |= (clamp_val(t.setup, 1, 4) - 1) << shift;
pci_write_config_byte(pdev, 0x4C, setup);
}
@@ -284,22 +280,20 @@
((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
- switch(udma_type) {
- default:
- /* BUG() ? */
- /* fall through */
- case 33:
- ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
- break;
- case 66:
- ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
- break;
- case 100:
- ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
- break;
- case 133:
- ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
- break;
+ switch (udma_type) {
+ case ATA_UDMA2:
+ default:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
+ break;
+ case ATA_UDMA4:
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
+ break;
+ case ATA_UDMA5:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
+ break;
+ case ATA_UDMA6:
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
+ break;
}
/* Set UDMA unless device is not UDMA capable */
@@ -325,22 +319,16 @@
{
const struct via_isa_bridge *config = ap->host->private_data;
int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
- int mode = config->flags & VIA_UDMA;
- static u8 tclock[5] = { 1, 1, 2, 3, 4 };
- static u8 udma[5] = { 0, 33, 66, 100, 133 };
- via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]);
+ via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask);
}
static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
const struct via_isa_bridge *config = ap->host->private_data;
int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1;
- int mode = config->flags & VIA_UDMA;
- static u8 tclock[5] = { 1, 1, 2, 3, 4 };
- static u8 udma[5] = { 0, 33, 66, 100, 133 };
- via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
+ via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask);
}
/**
@@ -604,33 +592,29 @@
via_config_fifo(pdev, config->flags);
/* Clock set up */
- switch(config->flags & VIA_UDMA) {
- case VIA_UDMA_NONE:
- if (config->flags & VIA_NO_UNMASK)
- ppi[0] = &via_mwdma_info_borked;
- else
- ppi[0] = &via_mwdma_info;
- break;
- case VIA_UDMA_33:
- ppi[0] = &via_udma33_info;
- break;
- case VIA_UDMA_66:
- ppi[0] = &via_udma66_info;
- /* The 66 MHz devices require we enable the clock */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing |= 0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- break;
- case VIA_UDMA_100:
- ppi[0] = &via_udma100_info;
- break;
- case VIA_UDMA_133:
- ppi[0] = &via_udma133_info;
- break;
- default:
- WARN_ON(1);
- return -ENODEV;
- }
+ switch (config->udma_mask) {
+ case 0x00:
+ if (config->flags & VIA_NO_UNMASK)
+ ppi[0] = &via_mwdma_info_borked;
+ else
+ ppi[0] = &via_mwdma_info;
+ break;
+ case ATA_UDMA2:
+ ppi[0] = &via_udma33_info;
+ break;
+ case ATA_UDMA4:
+ ppi[0] = &via_udma66_info;
+ break;
+ case ATA_UDMA5:
+ ppi[0] = &via_udma100_info;
+ break;
+ case ATA_UDMA6:
+ ppi[0] = &via_udma133_info;
+ break;
+ default:
+ WARN_ON(1);
+ return -ENODEV;
+ }
if (config->flags & VIA_BAD_CLK66) {
/* Disable the 66MHz clock on problem devices */
@@ -640,7 +624,7 @@
}
/* We have established the device type, now fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
+ return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0);
}
#ifdef CONFIG_PM
@@ -667,7 +651,7 @@
via_config_fifo(pdev, config->flags);
- if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
+ if (config->udma_mask == ATA_UDMA4) {
/* The 66 MHz devices require we enable the clock */
pci_read_config_dword(pdev, 0x50, &timing);
timing |= 0x80008;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0c82d33..684fe04 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -772,7 +772,7 @@
}
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
- blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+ blk_queue_max_segments(sdev->request_queue, sg_tablesize);
ata_port_printk(ap, KERN_INFO,
"DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
(unsigned long long)*ap->host->dev->dma_mask,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 02efd9a..08f6549 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -40,11 +40,13 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.4"
+#define DRV_VERSION "2.6"
/*
* vt8251 is different from other sata controllers of VIA. It has two
@@ -80,6 +82,7 @@
static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
static void svia_noop_freeze(struct ata_port *ap);
static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
+static void vt6420_bmdma_start(struct ata_queued_cmd *qc);
static int vt6421_pata_cable_detect(struct ata_port *ap);
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
@@ -121,6 +124,7 @@
.inherits = &svia_base_ops,
.freeze = svia_noop_freeze,
.prereset = vt6420_prereset,
+ .bmdma_start = vt6420_bmdma_start,
};
static struct ata_port_operations vt6421_pata_ops = {
@@ -377,6 +381,17 @@
return 0;
}
+static void vt6420_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ if ((qc->tf.command == ATA_CMD_PACKET) &&
+ (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) {
+ /* Prevents corruption on some ATAPI burners */
+ ata_sff_pause(ap);
+ }
+ ata_bmdma_start(qc);
+}
+
static int vt6421_pata_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -392,14 +407,16 @@
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 };
- pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]);
+ pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno,
+ pio_bits[adev->pio_mode - XFER_PIO_0]);
}
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
- pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]);
+ pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno,
+ udma_bits[adev->dma_mode - XFER_UDMA_0]);
}
static const unsigned int svia_bar_sizes[] = {
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index ce1fa92..459f1bc 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -2534,8 +2534,8 @@
blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
RequestQueue->queuedata = Controller;
blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
+ blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
+ blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
disk->queue = RequestQueue;
sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
disk->major = MajorNumber;
@@ -7134,7 +7134,7 @@
.MemoryWindowSize = DAC960_PD_RegisterWindowSize,
};
-static struct pci_device_id DAC960_id_table[] = {
+static const struct pci_device_id DAC960_id_table[] = {
{
.vendor = PCI_VENDOR_ID_MYLEX,
.device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 4f68843..c6ddeac 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -434,7 +434,7 @@
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
- blk_queue_max_sectors(brd->brd_queue, 1024);
+ blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
disk = brd->brd_disk = alloc_disk(1 << part_shift);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9291614..9e3af30 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -257,6 +257,79 @@
hlist_del_init(&c->list);
}
+static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list,
+ int nr_cmds)
+{
+ int i;
+
+ if (!cmd_sg_list)
+ return;
+ for (i = 0; i < nr_cmds; i++) {
+ kfree(cmd_sg_list[i]);
+ cmd_sg_list[i] = NULL;
+ }
+ kfree(cmd_sg_list);
+}
+
+static SGDescriptor_struct **cciss_allocate_sg_chain_blocks(
+ ctlr_info_t *h, int chainsize, int nr_cmds)
+{
+ int j;
+ SGDescriptor_struct **cmd_sg_list;
+
+ if (chainsize <= 0)
+ return NULL;
+
+ cmd_sg_list = kmalloc(sizeof(*cmd_sg_list) * nr_cmds, GFP_KERNEL);
+ if (!cmd_sg_list)
+ return NULL;
+
+ /* Build up chain blocks for each command */
+ for (j = 0; j < nr_cmds; j++) {
+ /* Need a block of chainsized s/g elements. */
+ cmd_sg_list[j] = kmalloc((chainsize *
+ sizeof(*cmd_sg_list[j])), GFP_KERNEL);
+ if (!cmd_sg_list[j]) {
+ dev_err(&h->pdev->dev, "Cannot get memory "
+ "for s/g chains.\n");
+ goto clean;
+ }
+ }
+ return cmd_sg_list;
+clean:
+ cciss_free_sg_chain_blocks(cmd_sg_list, nr_cmds);
+ return NULL;
+}
+
+static void cciss_unmap_sg_chain_block(ctlr_info_t *h, CommandList_struct *c)
+{
+ SGDescriptor_struct *chain_sg;
+ u64bit temp64;
+
+ if (c->Header.SGTotal <= h->max_cmd_sgentries)
+ return;
+
+ chain_sg = &c->SG[h->max_cmd_sgentries - 1];
+ temp64.val32.lower = chain_sg->Addr.lower;
+ temp64.val32.upper = chain_sg->Addr.upper;
+ pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
+}
+
+static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c,
+ SGDescriptor_struct *chain_block, int len)
+{
+ SGDescriptor_struct *chain_sg;
+ u64bit temp64;
+
+ chain_sg = &c->SG[h->max_cmd_sgentries - 1];
+ chain_sg->Ext = CCISS_SG_CHAIN;
+ chain_sg->Len = len;
+ temp64.val = pci_map_single(h->pdev, chain_block, len,
+ PCI_DMA_TODEVICE);
+ chain_sg->Addr.lower = temp64.val32.lower;
+ chain_sg->Addr.upper = temp64.val32.upper;
+}
+
#include "cciss_scsi.c" /* For SCSI tape support */
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
@@ -1344,26 +1417,27 @@
kfree(buff);
return -ENOMEM;
}
- // Fill in the command type
+ /* Fill in the command type */
c->cmd_type = CMD_IOCTL_PEND;
- // Fill in Command Header
- c->Header.ReplyQueue = 0; // unused in simple mode
- if (iocommand.buf_size > 0) // buffer to fill
+ /* Fill in Command Header */
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ if (iocommand.buf_size > 0) /* buffer to fill */
{
c->Header.SGList = 1;
c->Header.SGTotal = 1;
- } else // no buffers to fill
+ } else /* no buffers to fill */
{
c->Header.SGList = 0;
c->Header.SGTotal = 0;
}
c->Header.LUN = iocommand.LUN_info;
- c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag
+ /* use the kernel address the cmd block for tag */
+ c->Header.Tag.lower = c->busaddr;
- // Fill in Request block
+ /* Fill in Request block */
c->Request = iocommand.Request;
- // Fill in the scatter gather information
+ /* Fill in the scatter gather information */
if (iocommand.buf_size > 0) {
temp64.val = pci_map_single(host->pdev, buff,
iocommand.buf_size,
@@ -1371,7 +1445,7 @@
c->SG[0].Addr.lower = temp64.val32.lower;
c->SG[0].Addr.upper = temp64.val32.upper;
c->SG[0].Len = iocommand.buf_size;
- c->SG[0].Ext = 0; // we are not chaining
+ c->SG[0].Ext = 0; /* we are not chaining */
}
c->waiting = &wait;
@@ -1670,14 +1744,9 @@
/* unmap the DMA mapping for all the scatter gather elements */
for (i = 0; i < cmd->Header.SGList; i++) {
if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
- temp64.val32.lower = cmd->SG[i].Addr.lower;
- temp64.val32.upper = cmd->SG[i].Addr.upper;
- pci_dma_sync_single_for_cpu(h->pdev, temp64.val,
- cmd->SG[i].Len, ddir);
- pci_unmap_single(h->pdev, temp64.val,
- cmd->SG[i].Len, ddir);
+ cciss_unmap_sg_chain_block(h, cmd);
/* Point to the next block */
- curr_sg = h->cmd_sg_list[cmd->cmdindex]->sgchain;
+ curr_sg = h->cmd_sg_list[cmd->cmdindex];
sg_index = 0;
}
temp64.val32.lower = curr_sg[sg_index].Addr.lower;
@@ -1796,12 +1865,9 @@
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
/* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(disk->queue, h->maxsgentries);
+ blk_queue_max_segments(disk->queue, h->maxsgentries);
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(disk->queue, h->maxsgentries);
-
- blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
+ blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors);
blk_queue_softirq_done(disk->queue, cciss_softirq_done);
@@ -2425,7 +2491,7 @@
c->Request.Type.Direction = XFER_READ;
c->Request.Timeout = 0;
c->Request.CDB[0] = cmd;
- c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB
+ c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0xFF;
c->Request.CDB[9] = size & 0xFF;
@@ -2694,7 +2760,7 @@
"cciss: reading geometry failed, volume "
"does not support reading geometry\n");
drv->heads = 255;
- drv->sectors = 32; // Sectors per track
+ drv->sectors = 32; /* Sectors per track */
drv->cylinders = total_size + 1;
drv->raid_level = RAID_UNKNOWN;
} else {
@@ -3082,7 +3148,6 @@
SGDescriptor_struct *curr_sg;
drive_info_struct *drv;
int i, dir;
- int nseg = 0;
int sg_index = 0;
int chained = 0;
@@ -3112,19 +3177,19 @@
/* fill in the request */
drv = creq->rq_disk->private_data;
- c->Header.ReplyQueue = 0; // unused in simple mode
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
/* got command from pool, so use the command block index instead */
/* for direct lookups. */
/* The first 2 bits are reserved for controller error reporting. */
c->Header.Tag.lower = (c->cmdindex << 3);
c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
- c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
- c->Request.Type.Type = TYPE_CMD; // It is a command.
+ c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
+ c->Request.Type.Type = TYPE_CMD; /* It is a command. */
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
(rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
- c->Request.Timeout = 0; // Don't time out
+ c->Request.Timeout = 0; /* Don't time out */
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
start_blk = blk_rq_pos(creq);
@@ -3149,13 +3214,8 @@
for (i = 0; i < seg; i++) {
if (((sg_index+1) == (h->max_cmd_sgentries)) &&
!chained && ((seg - i) > 1)) {
- nseg = seg - i;
- curr_sg[sg_index].Len = (nseg) *
- sizeof(SGDescriptor_struct);
- curr_sg[sg_index].Ext = CCISS_SG_CHAIN;
-
/* Point to next chain block. */
- curr_sg = h->cmd_sg_list[c->cmdindex]->sgchain;
+ curr_sg = h->cmd_sg_list[c->cmdindex];
sg_index = 0;
chained = 1;
}
@@ -3166,31 +3226,12 @@
curr_sg[sg_index].Addr.lower = temp64.val32.lower;
curr_sg[sg_index].Addr.upper = temp64.val32.upper;
curr_sg[sg_index].Ext = 0; /* we are not chaining */
-
++sg_index;
}
-
- if (chained) {
- int len;
- curr_sg = c->SG;
- sg_index = h->max_cmd_sgentries - 1;
- len = curr_sg[sg_index].Len;
- /* Setup pointer to next chain block.
- * Fill out last element in current chain
- * block with address of next chain block.
- */
- temp64.val = pci_map_single(h->pdev,
- h->cmd_sg_list[c->cmdindex]->sgchain,
- len, dir);
-
- h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val;
- curr_sg[sg_index].Addr.lower = temp64.val32.lower;
- curr_sg[sg_index].Addr.upper = temp64.val32.upper;
-
- pci_dma_sync_single_for_device(h->pdev,
- h->cmd_sg_list[c->cmdindex]->sg_chain_dma,
- len, dir);
- }
+ if (chained)
+ cciss_map_sg_chain_block(h, c, h->cmd_sg_list[c->cmdindex],
+ (seg - (h->max_cmd_sgentries - 1)) *
+ sizeof(SGDescriptor_struct));
/* track how many SG entries we are using */
if (seg > h->maxSG)
@@ -3209,11 +3250,11 @@
if (likely(blk_fs_request(creq))) {
if(h->cciss_read == CCISS_READ_10) {
c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
+ c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
c->Request.CDB[3] = (start_blk >> 16) & 0xff;
c->Request.CDB[4] = (start_blk >> 8) & 0xff;
c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
+ c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */
c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
@@ -3222,7 +3263,7 @@
c->Request.CDBLen = 16;
c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB
+ c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */
c->Request.CDB[3]= (upper32 >> 16) & 0xff;
c->Request.CDB[4]= (upper32 >> 8) & 0xff;
c->Request.CDB[5]= upper32 & 0xff;
@@ -4240,37 +4281,10 @@
goto clean4;
}
}
- hba[i]->cmd_sg_list = kmalloc(sizeof(struct Cmd_sg_list *) *
- hba[i]->nr_cmds,
- GFP_KERNEL);
- if (!hba[i]->cmd_sg_list) {
- printk(KERN_ERR "cciss%d: Cannot get memory for "
- "s/g chaining.\n", i);
+ hba[i]->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[i],
+ hba[i]->chainsize, hba[i]->nr_cmds);
+ if (!hba[i]->cmd_sg_list && hba[i]->chainsize > 0)
goto clean4;
- }
- /* Build up chain blocks for each command */
- if (hba[i]->chainsize > 0) {
- for (j = 0; j < hba[i]->nr_cmds; j++) {
- hba[i]->cmd_sg_list[j] =
- kmalloc(sizeof(struct Cmd_sg_list),
- GFP_KERNEL);
- if (!hba[i]->cmd_sg_list[j]) {
- printk(KERN_ERR "cciss%d: Cannot get memory "
- "for chain block.\n", i);
- goto clean4;
- }
- /* Need a block of chainsized s/g elements. */
- hba[i]->cmd_sg_list[j]->sgchain =
- kmalloc((hba[i]->chainsize *
- sizeof(SGDescriptor_struct)),
- GFP_KERNEL);
- if (!hba[i]->cmd_sg_list[j]->sgchain) {
- printk(KERN_ERR "cciss%d: Cannot get memory "
- "for s/g chains\n", i);
- goto clean4;
- }
- }
- }
spin_lock_init(&hba[i]->lock);
@@ -4329,16 +4343,7 @@
for (k = 0; k < hba[i]->nr_cmds; k++)
kfree(hba[i]->scatter_list[k]);
kfree(hba[i]->scatter_list);
- /* Only free up extra s/g lists if controller supports them */
- if (hba[i]->chainsize > 0) {
- for (j = 0; j < hba[i]->nr_cmds; j++) {
- if (hba[i]->cmd_sg_list[j]) {
- kfree(hba[i]->cmd_sg_list[j]->sgchain);
- kfree(hba[i]->cmd_sg_list[j]);
- }
- }
- kfree(hba[i]->cmd_sg_list);
- }
+ cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
hba[i]->nr_cmds * sizeof(CommandList_struct),
@@ -4456,16 +4461,7 @@
for (j = 0; j < hba[i]->nr_cmds; j++)
kfree(hba[i]->scatter_list[j]);
kfree(hba[i]->scatter_list);
- /* Only free up extra s/g lists if controller supports them */
- if (hba[i]->chainsize > 0) {
- for (j = 0; j < hba[i]->nr_cmds; j++) {
- if (hba[i]->cmd_sg_list[j]) {
- kfree(hba[i]->cmd_sg_list[j]->sgchain);
- kfree(hba[i]->cmd_sg_list[j]);
- }
- }
- kfree(hba[i]->cmd_sg_list);
- }
+ cciss_free_sg_chain_blocks(hba[i]->cmd_sg_list, hba[i]->nr_cmds);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
@@ -4498,7 +4494,7 @@
* boundary. Given that we use pci_alloc_consistent() to allocate an
* array of them, the size must be a multiple of 8 bytes.
*/
- BUILD_BUG_ON(sizeof(CommandList_struct) % 8);
+ BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
printk(KERN_INFO DRIVER_NAME "\n");
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 1d95db2..c5d4111 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -55,18 +55,12 @@
char device_initialized; /* indicates whether dev is initialized */
} drive_info_struct;
-struct Cmd_sg_list {
- SGDescriptor_struct *sgchain;
- dma_addr_t sg_chain_dma;
- int chain_block_size;
-};
-
struct ctlr_info
{
int ctlr;
char devname[8];
char *product_name;
- char firm_ver[4]; // Firmware version
+ char firm_ver[4]; /* Firmware version */
struct pci_dev *pdev;
__u32 board_id;
void __iomem *vaddr;
@@ -89,7 +83,7 @@
int maxsgentries;
int chainsize;
int max_cmd_sgentries;
- struct Cmd_sg_list **cmd_sg_list;
+ SGDescriptor_struct **cmd_sg_list;
# define DOORBELL_INT 0
# define PERF_MODE_INT 1
@@ -103,7 +97,7 @@
BYTE cciss_write;
BYTE cciss_read_capacity;
- // information about each logical volume
+ /* information about each logical volume */
drive_info_struct *drv[CISS_MAX_LUN];
struct access_method access;
@@ -116,7 +110,7 @@
unsigned int maxSG;
spinlock_t lock;
- //* pointers to command and error info pool */
+ /* pointers to command and error info pool */
CommandList_struct *cmd_pool;
dma_addr_t cmd_pool_dhandle;
ErrorInfo_struct *errinfo_pool;
@@ -134,12 +128,10 @@
*/
int next_to_run;
- // Disk structures we need to pass back
+ /* Disk structures we need to pass back */
struct gendisk *gendisk[CISS_MAX_LUN];
#ifdef CONFIG_CISS_SCSI_TAPE
- void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
- /* list of block side commands the scsi error handling sucked up */
- /* and saved for later processing */
+ struct cciss_scsi_adapter_data_t *scsi_ctlr;
#endif
unsigned char alive;
struct list_head scan_list;
@@ -315,4 +307,3 @@
#define CCISS_LOCK(i) (&hba[i]->lock)
#endif /* CCISS_H */
-
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index 6afa700..e624ff9 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -1,31 +1,16 @@
#ifndef CCISS_CMD_H
#define CCISS_CMD_H
-//###########################################################################
-//DEFINES
-//###########################################################################
+
+#include <linux/cciss_defs.h>
+
+/* DEFINES */
#define CISS_VERSION "1.00"
-//general boundary definitions
-#define SENSEINFOBYTES 32//note that this value may vary between host implementations
+/* general boundary definitions */
#define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000
#define MAXREPLYQS 256
-//Command Status value
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29
#define STATE_CHANGED 0x2a
@@ -49,30 +34,13 @@
#define ASYM_ACCESS_CHANGED 0x06
#define LUN_CAPACITY_CHANGED 0x09
-//transfer direction
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-//task attribute
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-//cdb type
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-//config space register offsets
+/* config space register offsets */
#define CFG_VENDORID 0x00
#define CFG_DEVICEID 0x02
#define CFG_I2OBAR 0x10
#define CFG_MEM1BAR 0x14
-//i2o space register offsets
+/* i2o space register offsets */
#define I2O_IBDB_SET 0x20
#define I2O_IBDB_CLEAR 0x70
#define I2O_INT_STATUS 0x30
@@ -81,7 +49,7 @@
#define I2O_OBPOST_Q 0x44
#define I2O_DMA1_CFG 0x214
-//Configuration Table
+/* Configuration Table */
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
@@ -103,24 +71,17 @@
__u64 val;
} u64bit;
-// Type defs used in the following structs
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
+/* Type defs used in the following structs */
#define QWORD vals32
-//###########################################################################
-//STRUCTURES
-//###########################################################################
-#define CISS_MAX_LUN 1024
+/* STRUCTURES */
#define CISS_MAX_PHYS_LUN 1024
-// SCSI-3 Cmmands
+/* SCSI-3 Cmmands */
#pragma pack(1)
#define CISS_INQUIRY 0x12
-//Date returned
+/* Date returned */
typedef struct _InquiryData_struct
{
BYTE data_byte[36];
@@ -128,7 +89,7 @@
#define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */
-// Data returned
+/* Data returned */
typedef struct _ReportLUNdata_struct
{
BYTE LUNListLength[4];
@@ -139,8 +100,8 @@
#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */
typedef struct _ReadCapdata_struct
{
- BYTE total_size[4]; // Total size in blocks
- BYTE block_size[4]; // Size of blocks in bytes
+ BYTE total_size[4]; /* Total size in blocks */
+ BYTE block_size[4]; /* Size of blocks in bytes */
} ReadCapdata_struct;
#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */
@@ -172,52 +133,13 @@
#define CDB_LEN10 10
#define CDB_LEN16 16
-// BMIC commands
+/* BMIC commands */
#define BMIC_READ 0x26
#define BMIC_WRITE 0x27
#define BMIC_CACHE_FLUSH 0xc2
-#define CCISS_CACHE_FLUSH 0x01 //C2 was already being used by CCISS
+#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
-//Command List Structure
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; // b00
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; // b01
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; // b10
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; //2 level target device addr
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
+/* Command List Structure */
#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
typedef struct _CommandListHeader_struct {
@@ -227,16 +149,6 @@
QWORD Tag;
LUNAddr_struct LUN;
} CommandListHeader_struct;
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
typedef struct _ErrDescriptor_struct {
QWORD Addr;
DWORD Len;
@@ -247,28 +159,6 @@
DWORD Ext;
} SGDescriptor_struct;
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size;//size of offending entry
- BYTE offense_num; //byte # of offense 0-base
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
/* Command types */
#define CMD_RWREQ 0x00
#define CMD_IOCTL_PEND 0x01
@@ -277,10 +167,18 @@
#define CMD_MSG_TIMEOUT 0x05
#define CMD_MSG_STALE 0xff
-/* This structure needs to be divisible by 8 for new
- * indexing method.
+/* This structure needs to be divisible by COMMANDLIST_ALIGNMENT
+ * because low bits of the address are used to to indicate that
+ * whether the tag contains an index or an address. PAD_32 and
+ * PAD_64 can be adjusted independently as needed for 32-bit
+ * and 64-bits systems.
*/
-#define PADSIZE (sizeof(long) - 4)
+#define COMMANDLIST_ALIGNMENT (8)
+#define IS_64_BIT ((sizeof(long) - 4)/4)
+#define IS_32_BIT (!IS_64_BIT)
+#define PAD_32 (0)
+#define PAD_64 (4)
+#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
typedef struct _CommandList_struct {
CommandListHeader_struct Header;
RequestBlock_struct Request;
@@ -300,7 +198,7 @@
char pad[PADSIZE];
} CommandList_struct;
-//Configuration Table Structure
+/* Configuration Table Structure */
typedef struct _HostWrite_struct {
DWORD TransportRequest;
DWORD Reserved;
@@ -326,4 +224,4 @@
DWORD MaxPhysicalDrivesPerLogicalUnit;
} CfgTable_struct;
#pragma pack()
-#endif // CCISS_CMD_H
+#endif /* CCISS_CMD_H */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 5d0e46d..e1d0e2c 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -84,7 +84,6 @@
.queuecommand = cciss_scsi_queue_command,
.can_queue = SCSI_CCISS_CAN_QUEUE,
.this_id = 7,
- .sg_tablesize = MAXSGENTRIES,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
/* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
@@ -93,11 +92,16 @@
};
#pragma pack(1)
+
+#define SCSI_PAD_32 0
+#define SCSI_PAD_64 0
+
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
ErrorInfo_struct Err;
__u32 busaddr;
- __u32 pad;
+ int cmdindex;
+ u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64];
};
#pragma pack()
@@ -118,16 +122,15 @@
struct cciss_scsi_adapter_data_t {
struct Scsi_Host *scsi_host;
struct cciss_scsi_cmd_stack_t cmd_stack;
+ SGDescriptor_struct **cmd_sg_list;
int registered;
spinlock_t lock; // to protect ccissscsi[ctlr];
};
#define CPQ_TAPE_LOCK(ctlr, flags) spin_lock_irqsave( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
+ &hba[ctlr]->scsi_ctlr->lock, flags);
#define CPQ_TAPE_UNLOCK(ctlr, flags) spin_unlock_irqrestore( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
+ &hba[ctlr]->scsi_ctlr->lock, flags);
static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
@@ -143,7 +146,7 @@
struct cciss_scsi_cmd_stack_t *stk;
u64bit temp64;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top < 0)
@@ -154,6 +157,7 @@
memset(&c->Err, 0, sizeof(c->Err));
/* set physical addr of cmd and addr of scsi parameters */
c->cmd.busaddr = c->busaddr;
+ c->cmd.cmdindex = c->cmdindex;
/* (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */
@@ -182,7 +186,7 @@
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top >= CMD_STACK_SIZE) {
printk("cciss: scsi_cmd_free called too many times.\n");
@@ -199,24 +203,31 @@
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
+ sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(hba[ctlr],
+ hba[ctlr]->chainsize, CMD_STACK_SIZE);
+ if (!sa->cmd_sg_list && hba[ctlr]->chainsize > 0)
+ return -ENOMEM;
+
stk = &sa->cmd_stack;
size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
- // pci_alloc_consistent guarantees 32-bit DMA address will
- // be used
-
+ /* Check alignment, see cciss_cmd.h near CommandList_struct def. */
+ BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
+ /* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
if (stk->pool == NULL) {
- printk("stk->pool is null\n");
- return -1;
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
+ sa->cmd_sg_list = NULL;
+ return -ENOMEM;
}
for (i=0; i<CMD_STACK_SIZE; i++) {
stk->elem[i] = &stk->pool[i];
stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
+ stk->elem[i]->cmdindex = i;
}
stk->top = CMD_STACK_SIZE-1;
return 0;
@@ -229,7 +240,7 @@
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top != CMD_STACK_SIZE-1) {
printk( "cciss: %d scsi commands are still outstanding.\n",
@@ -241,6 +252,7 @@
pci_free_consistent(hba[ctlr]->pdev, size, stk->pool, stk->cmd_pool_handle);
stk->pool = NULL;
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
}
#if 0
@@ -530,8 +542,7 @@
CPQ_TAPE_LOCK(ctlr, flags);
if (hostno != -1) /* if it's not the first time... */
- sh = ((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host;
+ sh = hba[ctlr]->scsi_ctlr->scsi_host;
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
@@ -702,7 +713,7 @@
kfree(shba);
shba = NULL;
}
- hba[cntl_num]->scsi_ctlr = (void *) shba;
+ hba[cntl_num]->scsi_ctlr = shba;
return;
}
@@ -725,6 +736,8 @@
ctlr = hba[cp->ctlr];
scsi_dma_unmap(cmd);
+ if (cp->Header.SGTotal > ctlr->max_cmd_sgentries)
+ cciss_unmap_sg_chain_block(ctlr, cp);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
@@ -847,9 +860,10 @@
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
+ sh->sg_tablesize = hba[ctlr]->maxsgentries;
((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host = (void *) sh;
+ hba[ctlr]->scsi_ctlr)->scsi_host = sh;
sh->hostdata[0] = (unsigned long) hba[ctlr];
sh->irq = hba[ctlr]->intr[SIMPLE_MODE_INT];
sh->unique_id = sh->irq;
@@ -1364,34 +1378,54 @@
dma mapping and fills in the scatter gather entries of the
cciss command, cp. */
-static void
-cciss_scatter_gather(struct pci_dev *pdev,
- CommandList_struct *cp,
- struct scsi_cmnd *cmd)
+static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *cp,
+ struct scsi_cmnd *cmd)
{
unsigned int len;
struct scatterlist *sg;
__u64 addr64;
- int use_sg, i;
+ int request_nsgs, i, chained, sg_index;
+ struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr;
+ SGDescriptor_struct *curr_sg;
- BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES);
+ BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
- use_sg = scsi_dma_map(cmd);
- if (use_sg) { /* not too many addrs? */
- scsi_for_each_sg(cmd, sg, use_sg, i) {
+ chained = 0;
+ sg_index = 0;
+ curr_sg = cp->SG;
+ request_nsgs = scsi_dma_map(cmd);
+ if (request_nsgs) {
+ scsi_for_each_sg(cmd, sg, request_nsgs, i) {
+ if (sg_index + 1 == h->max_cmd_sgentries &&
+ !chained && request_nsgs - i > 1) {
+ chained = 1;
+ sg_index = 0;
+ curr_sg = sa->cmd_sg_list[cp->cmdindex];
+ }
addr64 = (__u64) sg_dma_address(sg);
len = sg_dma_len(sg);
- cp->SG[i].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[i].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[i].Len = len;
- cp->SG[i].Ext = 0; // we are not chaining
+ curr_sg[sg_index].Addr.lower =
+ (__u32) (addr64 & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Addr.upper =
+ (__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Len = len;
+ curr_sg[sg_index].Ext = 0;
+ ++sg_index;
}
+ if (chained)
+ cciss_map_sg_chain_block(h, cp,
+ sa->cmd_sg_list[cp->cmdindex],
+ (request_nsgs - (h->max_cmd_sgentries - 1)) *
+ sizeof(SGDescriptor_struct));
}
-
- cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */
+ /* track how many SG entries we are using */
+ if (request_nsgs > h->maxSG)
+ h->maxSG = request_nsgs;
+ cp->Header.SGTotal = (__u8) request_nsgs + chained;
+ if (request_nsgs > h->max_cmd_sgentries)
+ cp->Header.SGList = h->max_cmd_sgentries;
+ else
+ cp->Header.SGList = cp->Header.SGTotal;
return;
}
@@ -1399,7 +1433,7 @@
static int
cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
- ctlr_info_t **c;
+ ctlr_info_t *c;
int ctlr, rc;
unsigned char scsi3addr[8];
CommandList_struct *cp;
@@ -1407,8 +1441,8 @@
// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
// We violate cmd->host privacy here. (Is there another way?)
- c = (ctlr_info_t **) &cmd->device->host->hostdata[0];
- ctlr = (*c)->ctlr;
+ c = (ctlr_info_t *) cmd->device->host->hostdata[0];
+ ctlr = c->ctlr;
rc = lookup_scsi3addr(ctlr, cmd->device->channel, cmd->device->id,
cmd->device->lun, scsi3addr);
@@ -1431,7 +1465,7 @@
see what the device thinks of it. */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- cp = scsi_cmd_alloc(*c);
+ cp = scsi_cmd_alloc(c);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
if (cp == NULL) { /* trouble... */
printk("scsi_cmd_alloc returned NULL!\n");
@@ -1489,15 +1523,14 @@
BUG();
break;
}
-
- cciss_scatter_gather((*c)->pdev, cp, cmd); // Fill the SG list
+ cciss_scatter_gather(c, cp, cmd);
/* Put the request on the tail of the request queue */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&(*c)->reqQ, cp);
- (*c)->Qdepth++;
- start_io(*c);
+ addQ(&c->reqQ, cp);
+ c->Qdepth++;
+ start_io(c);
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
/* the cmd'll come back via intr handler in complete_scsi_command() */
@@ -1514,7 +1547,7 @@
/* we are being forcibly unloaded, and may not refuse. */
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
@@ -1541,7 +1574,7 @@
unsigned long flags;
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = hba[ctlr]->scsi_ctlr;
stk = &sa->cmd_stack;
if (sa->registered) {
@@ -1654,14 +1687,14 @@
int rc;
CommandList_struct *cmd_in_trouble;
unsigned char lunaddr[8];
- ctlr_info_t **c;
+ ctlr_info_t *c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
+ c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
- ctlr = (*c)->ctlr;
+ ctlr = c->ctlr;
printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr);
/* find the command that's giving us trouble */
cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
@@ -1671,7 +1704,7 @@
/* send a reset to the SCSI LUN which the command was sent to */
rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr,
TYPE_MSG);
- if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0)
+ if (rc == 0 && wait_for_device_to_become_ready(c, lunaddr) == 0)
return SUCCESS;
printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr);
return FAILED;
@@ -1682,14 +1715,14 @@
int rc;
CommandList_struct *cmd_to_abort;
unsigned char lunaddr[8];
- ctlr_info_t **c;
+ ctlr_info_t *c;
int ctlr;
/* find the controller to which the command to be aborted was sent */
- c = (ctlr_info_t **) &scsicmd->device->host->hostdata[0];
+ c = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
if (c == NULL) /* paranoia */
return FAILED;
- ctlr = (*c)->ctlr;
+ ctlr = c->ctlr;
printk(KERN_WARNING "cciss%d: aborting tardy SCSI cmd\n", ctlr);
/* find the command to be aborted */
diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h
index 7b75024..6d5822f 100644
--- a/drivers/block/cciss_scsi.h
+++ b/drivers/block/cciss_scsi.h
@@ -25,16 +25,16 @@
#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */
- // the scsi id of the adapter...
+ /* the scsi id of the adapter... */
#define SELF_SCSI_ID 15
- // 15 is somewhat arbitrary, since the scsi-2 bus
- // that's presented by the driver to the OS is
- // fabricated. The "real" scsi-3 bus the
- // hardware presents is fabricated too.
- // The actual, honest-to-goodness physical
- // bus that the devices are attached to is not
- // addressible natively, and may in fact turn
- // out to be not scsi at all.
+ /* 15 is somewhat arbitrary, since the scsi-2 bus
+ that's presented by the driver to the OS is
+ fabricated. The "real" scsi-3 bus the
+ hardware presents is fabricated too.
+ The actual, honest-to-goodness physical
+ bus that the devices are attached to is not
+ addressible natively, and may in fact turn
+ out to be not scsi at all. */
#define SCSI_CCISS_CAN_QUEUE 2
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 6422651..91d1163 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -448,11 +448,8 @@
blk_queue_bounce_limit(q, hba[i]->pci_dev->dma_mask);
/* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(q, SG_MAX);
+ blk_queue_max_segments(q, SG_MAX);
- /* This is a driver limit and could be eliminated. */
- blk_queue_max_phys_segments(q, SG_MAX);
-
init_timer(&hba[i]->timer);
hba[i]->timer.expires = jiffies + IDA_TIMER;
hba[i]->timer.data = (unsigned long)hba[i];
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 1292e06..4df3b40 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -709,9 +709,8 @@
max_seg_s = min(queue_max_sectors(b) * queue_logical_block_size(b), max_seg_s);
- blk_queue_max_sectors(q, max_seg_s >> 9);
- blk_queue_max_phys_segments(q, max_segments ? max_segments : MAX_PHYS_SEGMENTS);
- blk_queue_max_hw_segments(q, max_segments ? max_segments : MAX_HW_SEGMENTS);
+ blk_queue_max_hw_sectors(q, max_seg_s >> 9);
+ blk_queue_max_segments(q, max_segments ? max_segments : BLK_MAX_SEGMENTS);
blk_queue_max_segment_size(q, max_seg_s);
blk_queue_logical_block_size(q, 512);
blk_queue_segment_boundary(q, PAGE_SIZE-1);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 3266b4f..b9b1170 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4234,7 +4234,7 @@
err = -ENOMEM;
goto out_unreg_driver;
}
- blk_queue_max_sectors(floppy_queue, 64);
+ blk_queue_max_hw_sectors(floppy_queue, 64);
blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
floppy_find, NULL, NULL);
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index d5cdce0..5116c65 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -719,7 +719,7 @@
return -ENOMEM;
}
- blk_queue_max_sectors(hd_queue, 255);
+ blk_queue_max_hw_sectors(hd_queue, 255);
init_timer(&device_timer);
device_timer.function = hd_times_out;
blk_queue_logical_block_size(hd_queue, 512);
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 02b2583..5416c9a 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -980,7 +980,7 @@
__func__, __LINE__);
goto probe_err_6;
}
- blk_queue_max_sectors(host->breq, MG_MAX_SECTS);
+ blk_queue_max_hw_sectors(host->breq, MG_MAX_SECTS);
blk_queue_logical_block_size(host->breq, MG_SECTOR_SIZE);
init_timer(&host->timer);
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 569e39e..e712cd5 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -906,7 +906,7 @@
if (!pd_queue)
goto out1;
- blk_queue_max_sectors(pd_queue, cluster);
+ blk_queue_max_hw_sectors(pd_queue, cluster);
if (register_blkdev(major, name))
goto out2;
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index ea54ea3..ddb4f9a 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -956,8 +956,7 @@
return -ENOMEM;
}
- blk_queue_max_phys_segments(pf_queue, cluster);
- blk_queue_max_hw_segments(pf_queue, cluster);
+ blk_queue_max_segments(pf_queue, cluster);
for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
struct gendisk *disk = pf->disk;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 68b5957..b72935b 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -569,6 +569,7 @@
}
spin_lock_init(&pkt->lock);
+ bio_list_init(&pkt->orig_bios);
for (i = 0; i < frames; i++) {
struct bio *bio = pkt_bio_alloc(1);
@@ -721,43 +722,6 @@
}
/*
- * Add a bio to a single linked list defined by its head and tail pointers.
- */
-static void pkt_add_list_last(struct bio *bio, struct bio **list_head, struct bio **list_tail)
-{
- bio->bi_next = NULL;
- if (*list_tail) {
- BUG_ON((*list_head) == NULL);
- (*list_tail)->bi_next = bio;
- (*list_tail) = bio;
- } else {
- BUG_ON((*list_head) != NULL);
- (*list_head) = bio;
- (*list_tail) = bio;
- }
-}
-
-/*
- * Remove and return the first bio from a single linked list defined by its
- * head and tail pointers.
- */
-static inline struct bio *pkt_get_list_first(struct bio **list_head, struct bio **list_tail)
-{
- struct bio *bio;
-
- if (*list_head == NULL)
- return NULL;
-
- bio = *list_head;
- *list_head = bio->bi_next;
- if (*list_head == NULL)
- *list_tail = NULL;
-
- bio->bi_next = NULL;
- return bio;
-}
-
-/*
* Send a packet_command to the underlying block device and
* wait for completion.
*/
@@ -876,13 +840,10 @@
static void pkt_queue_bio(struct pktcdvd_device *pd, struct bio *bio)
{
spin_lock(&pd->iosched.lock);
- if (bio_data_dir(bio) == READ) {
- pkt_add_list_last(bio, &pd->iosched.read_queue,
- &pd->iosched.read_queue_tail);
- } else {
- pkt_add_list_last(bio, &pd->iosched.write_queue,
- &pd->iosched.write_queue_tail);
- }
+ if (bio_data_dir(bio) == READ)
+ bio_list_add(&pd->iosched.read_queue, bio);
+ else
+ bio_list_add(&pd->iosched.write_queue, bio);
spin_unlock(&pd->iosched.lock);
atomic_set(&pd->iosched.attention, 1);
@@ -917,8 +878,8 @@
int reads_queued, writes_queued;
spin_lock(&pd->iosched.lock);
- reads_queued = (pd->iosched.read_queue != NULL);
- writes_queued = (pd->iosched.write_queue != NULL);
+ reads_queued = !bio_list_empty(&pd->iosched.read_queue);
+ writes_queued = !bio_list_empty(&pd->iosched.write_queue);
spin_unlock(&pd->iosched.lock);
if (!reads_queued && !writes_queued)
@@ -927,7 +888,7 @@
if (pd->iosched.writing) {
int need_write_seek = 1;
spin_lock(&pd->iosched.lock);
- bio = pd->iosched.write_queue;
+ bio = bio_list_peek(&pd->iosched.write_queue);
spin_unlock(&pd->iosched.lock);
if (bio && (bio->bi_sector == pd->iosched.last_write))
need_write_seek = 0;
@@ -950,13 +911,10 @@
}
spin_lock(&pd->iosched.lock);
- if (pd->iosched.writing) {
- bio = pkt_get_list_first(&pd->iosched.write_queue,
- &pd->iosched.write_queue_tail);
- } else {
- bio = pkt_get_list_first(&pd->iosched.read_queue,
- &pd->iosched.read_queue_tail);
- }
+ if (pd->iosched.writing)
+ bio = bio_list_pop(&pd->iosched.write_queue);
+ else
+ bio = bio_list_pop(&pd->iosched.read_queue);
spin_unlock(&pd->iosched.lock);
if (!bio)
@@ -992,14 +950,14 @@
static int pkt_set_segment_merging(struct pktcdvd_device *pd, struct request_queue *q)
{
if ((pd->settings.size << 9) / CD_FRAMESIZE
- <= queue_max_phys_segments(q)) {
+ <= queue_max_segments(q)) {
/*
* The cdrom device can handle one segment/frame
*/
clear_bit(PACKET_MERGE_SEGS, &pd->flags);
return 0;
} else if ((pd->settings.size << 9) / PAGE_SIZE
- <= queue_max_phys_segments(q)) {
+ <= queue_max_segments(q)) {
/*
* We can handle this case at the expense of some extra memory
* copies during write operations
@@ -1114,7 +1072,7 @@
int f;
char written[PACKET_MAX_SIZE];
- BUG_ON(!pkt->orig_bios);
+ BUG_ON(bio_list_empty(&pkt->orig_bios));
atomic_set(&pkt->io_wait, 0);
atomic_set(&pkt->io_errors, 0);
@@ -1124,7 +1082,7 @@
*/
memset(written, 0, sizeof(written));
spin_lock(&pkt->lock);
- for (bio = pkt->orig_bios; bio; bio = bio->bi_next) {
+ bio_list_for_each(bio, &pkt->orig_bios) {
int first_frame = (bio->bi_sector - pkt->sector) / (CD_FRAMESIZE >> 9);
int num_frames = bio->bi_size / CD_FRAMESIZE;
pd->stats.secs_w += num_frames * (CD_FRAMESIZE >> 9);
@@ -1363,7 +1321,7 @@
break;
pkt_rbtree_erase(pd, node);
spin_lock(&pkt->lock);
- pkt_add_list_last(bio, &pkt->orig_bios, &pkt->orig_bios_tail);
+ bio_list_add(&pkt->orig_bios, bio);
pkt->write_size += bio->bi_size / CD_FRAMESIZE;
spin_unlock(&pkt->lock);
}
@@ -1409,7 +1367,7 @@
*/
frames_write = 0;
spin_lock(&pkt->lock);
- for (bio = pkt->orig_bios; bio; bio = bio->bi_next) {
+ bio_list_for_each(bio, &pkt->orig_bios) {
int segment = bio->bi_idx;
int src_offs = 0;
int first_frame = (bio->bi_sector - pkt->sector) / (CD_FRAMESIZE >> 9);
@@ -1472,20 +1430,14 @@
static void pkt_finish_packet(struct packet_data *pkt, int uptodate)
{
- struct bio *bio, *next;
+ struct bio *bio;
if (!uptodate)
pkt->cache_valid = 0;
/* Finish all bios corresponding to this packet */
- bio = pkt->orig_bios;
- while (bio) {
- next = bio->bi_next;
- bio->bi_next = NULL;
+ while ((bio = bio_list_pop(&pkt->orig_bios)))
bio_endio(bio, uptodate ? 0 : -EIO);
- bio = next;
- }
- pkt->orig_bios = pkt->orig_bios_tail = NULL;
}
static void pkt_run_state_machine(struct pktcdvd_device *pd, struct packet_data *pkt)
@@ -2360,7 +2312,7 @@
* even if the size is a multiple of the packet size.
*/
spin_lock_irq(q->queue_lock);
- blk_queue_max_sectors(q, pd->settings.size);
+ blk_queue_max_hw_sectors(q, pd->settings.size);
spin_unlock_irq(q->queue_lock);
set_bit(PACKET_WRITABLE, &pd->flags);
} else {
@@ -2567,8 +2519,7 @@
spin_lock(&pkt->lock);
if ((pkt->state == PACKET_WAITING_STATE) ||
(pkt->state == PACKET_READ_WAIT_STATE)) {
- pkt_add_list_last(bio, &pkt->orig_bios,
- &pkt->orig_bios_tail);
+ bio_list_add(&pkt->orig_bios, bio);
pkt->write_size += bio->bi_size / CD_FRAMESIZE;
if ((pkt->write_size >= pkt->frames) &&
(pkt->state == PACKET_WAITING_STATE)) {
@@ -2662,7 +2613,7 @@
blk_queue_make_request(q, pkt_make_request);
blk_queue_logical_block_size(q, CD_FRAMESIZE);
- blk_queue_max_sectors(q, PACKET_MAX_SECTORS);
+ blk_queue_max_hw_sectors(q, PACKET_MAX_SECTORS);
blk_queue_merge_bvec(q, pkt_merge_bvec);
q->queuedata = pd;
}
@@ -2898,6 +2849,8 @@
spin_lock_init(&pd->lock);
spin_lock_init(&pd->iosched.lock);
+ bio_list_init(&pd->iosched.read_queue);
+ bio_list_init(&pd->iosched.write_queue);
sprintf(pd->name, DRIVER_NAME"%d", idx);
init_waitqueue_head(&pd->wqueue);
pd->bio_queue = RB_ROOT;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 03a130d..bc95469 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -474,7 +474,7 @@
blk_queue_bounce_limit(queue, BLK_BOUNCE_HIGH);
- blk_queue_max_sectors(queue, dev->bounce_size >> 9);
+ blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9);
blk_queue_segment_boundary(queue, -1UL);
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
@@ -482,8 +482,7 @@
blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH,
ps3disk_prepare_flush);
- blk_queue_max_phys_segments(queue, -1);
- blk_queue_max_hw_segments(queue, -1);
+ blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
gendisk = alloc_disk(PS3DISK_MINORS);
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index 1fb6c31..e446082 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -751,10 +751,9 @@
priv->queue = queue;
queue->queuedata = dev;
blk_queue_make_request(queue, ps3vram_make_request);
- blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS);
- blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS);
- blk_queue_max_segment_size(queue, MAX_SEGMENT_SIZE);
- blk_queue_max_sectors(queue, SAFE_MAX_SECTORS);
+ blk_queue_max_segments(queue, BLK_MAX_SEGMENTS);
+ blk_queue_max_segment_size(queue, BLK_MAX_SEGMENT_SIZE);
+ blk_queue_max_hw_sectors(queue, BLK_SAFE_MAX_SECTORS);
gendisk = alloc_disk(1);
if (!gendisk) {
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 411f064..48e8fee 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -691,9 +691,8 @@
port->disk = g;
- blk_queue_max_hw_segments(q, port->ring_cookies);
- blk_queue_max_phys_segments(q, port->ring_cookies);
- blk_queue_max_sectors(q, port->max_xfer_size);
+ blk_queue_max_segments(q, port->ring_cookies);
+ blk_queue_max_hw_sectors(q, port->max_xfer_size);
g->major = vdc_major;
g->first_minor = port->vio.vdev->dev_no << PARTITION_SHIFT;
strcpy(g->disk_name, port->disk_name);
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index a7c4184..b70f0fc 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -409,7 +409,7 @@
static void carm_remove_one (struct pci_dev *pdev);
static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static struct pci_device_id carm_pci_tbl[] = {
+static const struct pci_device_id carm_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
{ PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
{ } /* terminate list */
@@ -1518,8 +1518,7 @@
break;
}
disk->queue = q;
- blk_queue_max_hw_segments(q, CARM_MAX_REQ_SG);
- blk_queue_max_phys_segments(q, CARM_MAX_REQ_SG);
+ blk_queue_max_segments(q, CARM_MAX_REQ_SG);
blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
q->queuedata = port;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index c739b20..2e88983 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -393,7 +393,7 @@
#define ub_usb_ids usb_storage_usb_ids
#else
-static struct usb_device_id ub_usb_ids[] = {
+static const struct usb_device_id ub_usb_ids[] = {
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
{ }
};
@@ -2320,10 +2320,9 @@
disk->queue = q;
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
- blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
- blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
+ blk_queue_max_segments(q, UB_MAX_REQ_SG);
blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
- blk_queue_max_sectors(q, UB_MAX_SECTORS);
+ blk_queue_max_hw_sectors(q, UB_MAX_SECTORS);
blk_queue_logical_block_size(q, lun->capacity.bsize);
lun->disk = disk;
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 1b3def1..788d938 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -462,9 +462,8 @@
}
d->disk = g;
- blk_queue_max_hw_segments(q, VIOMAXBLOCKDMA);
- blk_queue_max_phys_segments(q, VIOMAXBLOCKDMA);
- blk_queue_max_sectors(q, VIODASD_MAXSECTORS);
+ blk_queue_max_segments(q, VIOMAXBLOCKDMA);
+ blk_queue_max_hw_sectors(q, VIODASD_MAXSECTORS);
g->major = VIODASD_MAJOR;
g->first_minor = dev_no << PARTITION_SHIFT;
if (dev_no >= 26)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 7eff828..3c64af0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -435,7 +435,7 @@
kfree(vblk);
}
-static struct virtio_device_id id_table[] = {
+static const struct virtio_device_id id_table[] = {
{ VIRTIO_ID_BLOCK, VIRTIO_DEV_ANY_ID },
{ 0 },
};
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index d1fd032..1a325fb 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -242,7 +242,7 @@
}
/* xd_maxsectors depends on controller - so set after detection */
- blk_queue_max_sectors(xd_queue, xd_maxsectors);
+ blk_queue_max_hw_sectors(xd_queue, xd_maxsectors);
for (i = 0; i < xd_drives; i++)
add_disk(xd_gendisk[i]);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 05a31e5..9c09694 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -346,15 +346,14 @@
/* Hard sector size and max sectors impersonate the equiv. hardware. */
blk_queue_logical_block_size(rq, sector_size);
- blk_queue_max_sectors(rq, 512);
+ blk_queue_max_hw_sectors(rq, 512);
/* Each segment in a request is up to an aligned page in size. */
blk_queue_segment_boundary(rq, PAGE_SIZE - 1);
blk_queue_max_segment_size(rq, PAGE_SIZE);
/* Ensure a merged request will fit in a single I/O ring slot. */
- blk_queue_max_phys_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST);
- blk_queue_max_hw_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ blk_queue_max_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST);
/* Make sure buffer addresses are sector-aligned. */
blk_queue_dma_alignment(rq, 511);
@@ -1050,7 +1049,7 @@
};
-static struct xenbus_device_id blkfront_ids[] = {
+static const struct xenbus_device_id blkfront_ids[] = {
{ "vbd" },
{ "" }
};
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index e5c5415..e1c95e2 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1227,7 +1227,7 @@
}
/* Match table for of_platform binding */
-static struct of_device_id ace_of_match[] __devinitdata = {
+static const struct of_device_id ace_of_match[] __devinitconst = {
{ .compatible = "xlnx,opb-sysace-1.00.b", },
{ .compatible = "xlnx,opb-sysace-1.00.c", },
{ .compatible = "xlnx,xps-sysace-1.00.a", },
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index e789e6c..03c71f7 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -741,7 +741,7 @@
{
blk_queue_logical_block_size(gd.gdrom_rq, GDROM_HARD_SECTOR);
/* using DMA so memory will need to be contiguous */
- blk_queue_max_hw_segments(gd.gdrom_rq, 1);
+ blk_queue_max_segments(gd.gdrom_rq, 1);
/* set a large max size to get most from DMA */
blk_queue_max_segment_size(gd.gdrom_rq, 0x40000);
gd.disk->queue = gd.gdrom_rq;
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 57ca69e..cc435be 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -616,9 +616,8 @@
gendisk->first_minor = deviceno;
strncpy(gendisk->disk_name, c->name,
sizeof(gendisk->disk_name));
- blk_queue_max_hw_segments(q, 1);
- blk_queue_max_phys_segments(q, 1);
- blk_queue_max_sectors(q, 4096 / 512);
+ blk_queue_max_segments(q, 1);
+ blk_queue_max_hw_sectors(q, 4096 / 512);
gendisk->queue = q;
gendisk->fops = &viocd_fops;
gendisk->flags = GENHD_FL_CD|GENHD_FL_REMOVABLE;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 6ea1014..d31483c 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -114,7 +114,7 @@
config HW_RANDOM_OMAP
tristate "OMAP Random Number Generator support"
- depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+ depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP2)
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index f706b1d..ada25bb 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1185,11 +1185,6 @@
rep = (down == 2);
-#ifdef CONFIG_MAC_EMUMOUSEBTN
- if (mac_hid_mouse_emulate_buttons(1, keycode, down))
- return;
-#endif /* CONFIG_MAC_EMUMOUSEBTN */
-
if ((raw_mode = (kbd->kbdmode == VC_RAW)) && !hw_raw)
if (emulate_raw(vc, keycode, !down << 7))
if (keycode < BTN_MISC && printk_ratelimit())
@@ -1328,6 +1323,21 @@
schedule_console_callback();
}
+static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
+{
+ int i;
+
+ if (test_bit(EV_SND, dev->evbit))
+ return true;
+
+ if (test_bit(EV_KEY, dev->evbit))
+ for (i = KEY_RESERVED; i < BTN_MISC; i++)
+ if (test_bit(i, dev->keybit))
+ return true;
+
+ return false;
+}
+
/*
* When a keyboard (or other input device) is found, the kbd_connect
* function is called. The function then looks at the device, and if it
@@ -1339,14 +1349,6 @@
{
struct input_handle *handle;
int error;
- int i;
-
- for (i = KEY_RESERVED; i < BTN_MISC; i++)
- if (test_bit(i, dev->keybit))
- break;
-
- if (i == BTN_MISC && !test_bit(EV_SND, dev->evbit))
- return -ENODEV;
handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
if (!handle)
@@ -1412,6 +1414,7 @@
static struct input_handler kbd_handler = {
.event = kbd_event,
+ .match = kbd_match,
.connect = kbd_connect,
.disconnect = kbd_disconnect,
.start = kbd_start,
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index fdbcc9f..5eb83c3 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -336,14 +336,12 @@
static int nvram_open(struct inode *inode, struct file *file)
{
- lock_kernel();
spin_lock(&nvram_state_lock);
if ((nvram_open_cnt && (file->f_flags & O_EXCL)) ||
(nvram_open_mode & NVRAM_EXCL) ||
((file->f_mode & FMODE_WRITE) && (nvram_open_mode & NVRAM_WRITE))) {
spin_unlock(&nvram_state_lock);
- unlock_kernel();
return -EBUSY;
}
@@ -354,7 +352,6 @@
nvram_open_cnt++;
spin_unlock(&nvram_state_lock);
- unlock_kernel();
return 0;
}
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 6fe4f77..578595c 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -40,7 +40,6 @@
struct platform_device *pdev;
unsigned long flags;
- unsigned long flags_suspend;
unsigned long match_value;
unsigned long next_match_value;
unsigned long max_match_value;
@@ -432,6 +431,11 @@
sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE);
}
+static void sh_cmt_clocksource_resume(struct clocksource *cs)
+{
+ sh_cmt_start(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE);
+}
+
static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
char *name, unsigned long rating)
{
@@ -442,6 +446,8 @@
cs->read = sh_cmt_clocksource_read;
cs->enable = sh_cmt_clocksource_enable;
cs->disable = sh_cmt_clocksource_disable;
+ cs->suspend = sh_cmt_clocksource_disable;
+ cs->resume = sh_cmt_clocksource_resume;
cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
pr_info("sh_cmt: %s used as clock source\n", cs->name);
@@ -674,38 +680,11 @@
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
-static int sh_cmt_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_cmt_priv *p = platform_get_drvdata(pdev);
-
- /* save flag state and stop CMT channel */
- p->flags_suspend = p->flags;
- sh_cmt_stop(p, p->flags);
- return 0;
-}
-
-static int sh_cmt_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct sh_cmt_priv *p = platform_get_drvdata(pdev);
-
- /* start CMT channel from saved state */
- sh_cmt_start(p, p->flags_suspend);
- return 0;
-}
-
-static struct dev_pm_ops sh_cmt_dev_pm_ops = {
- .suspend = sh_cmt_suspend,
- .resume = sh_cmt_resume,
-};
-
static struct platform_driver sh_cmt_device_driver = {
.probe = sh_cmt_probe,
.remove = __devexit_p(sh_cmt_remove),
.driver = {
.name = "sh_cmt",
- .pm = &sh_cmt_dev_pm_ops,
}
};
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index d485cdd..70fef40 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1571,7 +1571,7 @@
sdev->start_stop_pwr_cond = 1;
if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
- blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
+ blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512);
blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d1c260..2b0bd0b 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -20,15 +20,15 @@
#include <linux/platform_device.h>
#include <linux/i2c-pnx.h>
#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
#include <mach/hardware.h>
#include <mach/i2c.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
#define I2C_PNX_TIMEOUT 10 /* msec */
#define I2C_PNX_SPEED_KHZ 100
#define I2C_PNX_REGION_SIZE 0x100
-#define PNX_DEFAULT_FREQ 13 /* MHz */
static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
{
@@ -50,22 +50,21 @@
return (timeout <= 0);
}
-static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *data = adap->algo_data;
- struct timer_list *timer = &data->mif.timer;
- int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+ struct timer_list *timer = &alg_data->mif.timer;
+ unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT);
if (expires <= 1)
expires = 2;
del_timer_sync(timer);
- dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+ dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n",
jiffies, expires);
timer->expires = jiffies + expires;
- timer->data = (unsigned long)adap;
+ timer->data = (unsigned long)&alg_data;
add_timer(timer);
}
@@ -77,34 +76,34 @@
*
* Generate a START signal in the desired mode.
*/
-static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+static int i2c_pnx_start(unsigned char slave_addr,
+ struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
-
- dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__,
+ dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
slave_addr, alg_data->mif.mode);
/* Check for 7 bit slave addresses only */
if (slave_addr & ~0x7f) {
- dev_err(&adap->dev, "%s: Invalid slave address %x. "
- "Only 7-bit addresses are supported\n",
- adap->name, slave_addr);
+ dev_err(&alg_data->adapter.dev,
+ "%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
+ alg_data->adapter.name, slave_addr);
return -EINVAL;
}
/* First, make sure bus is idle */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
/* Somebody else is monopolizing the bus */
- dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
- "cntrl = %x, stat = %x\n",
- adap->name, slave_addr,
- ioread32(I2C_REG_CTL(alg_data)),
- ioread32(I2C_REG_STS(alg_data)));
+ dev_err(&alg_data->adapter.dev,
+ "%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
+ alg_data->adapter.name, slave_addr,
+ ioread32(I2C_REG_CTL(alg_data)),
+ ioread32(I2C_REG_STS(alg_data)));
return -EBUSY;
} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
/* Sorry, we lost the bus */
- dev_err(&adap->dev, "%s: Arbitration failure. "
- "Slave addr = %02x\n", adap->name, slave_addr);
+ dev_err(&alg_data->adapter.dev,
+ "%s: Arbitration failure. Slave addr = %02x\n",
+ alg_data->adapter.name, slave_addr);
return -EIO;
}
@@ -115,14 +114,14 @@
iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
I2C_REG_STS(alg_data));
- dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__,
+ dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
(slave_addr << 1) | start_bit | alg_data->mif.mode);
/* Write the slave address, START bit and R/W bit */
iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
I2C_REG_TX(alg_data));
- dev_dbg(&adap->dev, "%s(): exit\n", __func__);
+ dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
return 0;
}
@@ -133,13 +132,12 @@
*
* Generate a STOP signal to terminate the master transaction.
*/
-static void i2c_pnx_stop(struct i2c_adapter *adap)
+static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
/* Only 1 msec max timeout due to interrupt context */
long timeout = 1000;
- dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
/* Write a STOP bit to TX FIFO */
@@ -153,7 +151,7 @@
timeout--;
}
- dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
}
@@ -163,12 +161,11 @@
*
* Sends one byte of data to the slave
*/
-static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 val;
- dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
if (alg_data->mif.len > 0) {
@@ -184,15 +181,15 @@
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
- dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__,
- val, alg_data->mif.len + 1);
+ dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
+ __func__, val, alg_data->mif.len + 1);
if (alg_data->mif.len == 0) {
if (alg_data->last) {
/* Wait until the STOP is seen. */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
- dev_err(&adap->dev, "The bus is still "
- "active after timeout\n");
+ dev_err(&alg_data->adapter.dev,
+ "The bus is still active after timeout\n");
}
/* Disable master interrupts */
iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -201,14 +198,15 @@
del_timer_sync(&alg_data->mif.timer);
- dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Waking up xfer routine.\n",
__func__);
complete(&alg_data->mif.complete);
}
} else if (alg_data->mif.len == 0) {
/* zero-sized transfer */
- i2c_pnx_stop(adap);
+ i2c_pnx_stop(alg_data);
/* Disable master interrupts. */
iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -217,13 +215,14 @@
/* Stop timer. */
del_timer_sync(&alg_data->mif.timer);
- dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
- "zero-xfer.\n", __func__);
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Waking up xfer routine after zero-xfer.\n",
+ __func__);
complete(&alg_data->mif.complete);
}
- dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
@@ -235,21 +234,21 @@
*
* Reads one byte data from the slave
*/
-static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
unsigned int val = 0;
u32 ctl = 0;
- dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
/* Check, whether there is already data,
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
- "Rx-fifo...\n", __func__);
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
if (alg_data->mif.len == 1) {
/* Last byte, do not acknowledge next rcv. */
@@ -281,16 +280,16 @@
if (alg_data->mif.len > 0) {
val = ioread32(I2C_REG_RX(alg_data));
*alg_data->mif.buf++ = (u8) (val & 0xff);
- dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
- alg_data->mif.len);
+ dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
+ __func__, val, alg_data->mif.len);
alg_data->mif.len--;
if (alg_data->mif.len == 0) {
if (alg_data->last)
/* Wait until the STOP is seen. */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
- dev_err(&adap->dev, "The bus is still "
- "active after timeout\n");
+ dev_err(&alg_data->adapter.dev,
+ "The bus is still active after timeout\n");
/* Disable master interrupts */
ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -304,7 +303,7 @@
}
}
- dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
@@ -312,11 +311,11 @@
static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
{
+ struct i2c_pnx_algo_data *alg_data = dev_id;
u32 stat, ctl;
- struct i2c_adapter *adap = dev_id;
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
- dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): mstat = %x mctrl = %x, mode = %d\n",
__func__,
ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)),
@@ -339,10 +338,10 @@
complete(&alg_data->mif.complete);
} else if (stat & mstatus_nai) {
/* Slave did not acknowledge, generate a STOP */
- dev_dbg(&adap->dev, "%s(): "
- "Slave did not acknowledge, generating a STOP.\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Slave did not acknowledge, generating a STOP.\n",
__func__);
- i2c_pnx_stop(adap);
+ i2c_pnx_stop(alg_data);
/* Disable master interrupts. */
ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -368,9 +367,9 @@
*/
if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
- i2c_pnx_master_xmit(adap);
+ i2c_pnx_master_xmit(alg_data);
} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
- i2c_pnx_master_rcv(adap);
+ i2c_pnx_master_rcv(alg_data);
}
}
}
@@ -379,7 +378,8 @@
stat = ioread32(I2C_REG_STS(alg_data));
iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
- dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): exiting, stat = %x ctrl = %x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)));
@@ -388,14 +388,13 @@
static void i2c_pnx_timeout(unsigned long data)
{
- struct i2c_adapter *adap = (struct i2c_adapter *)data;
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
u32 ctl;
- dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
- "Resetting master...\n",
- ioread32(I2C_REG_STS(alg_data)),
- ioread32(I2C_REG_CTL(alg_data)));
+ dev_err(&alg_data->adapter.dev,
+ "Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
/* Reset master and disable interrupts */
ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -409,15 +408,14 @@
complete(&alg_data->mif.complete);
}
-static inline void bus_reset_if_active(struct i2c_adapter *adap)
+static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
{
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 stat;
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
- dev_err(&adap->dev,
+ dev_err(&alg_data->adapter.dev,
"%s: Bus is still active after xfer. Reset it...\n",
- adap->name);
+ alg_data->adapter.name);
iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
I2C_REG_CTL(alg_data));
wait_reset(I2C_PNX_TIMEOUT, alg_data);
@@ -451,10 +449,11 @@
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 stat = ioread32(I2C_REG_STS(alg_data));
- dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): entering: %d messages, stat = %04x.\n",
__func__, num, ioread32(I2C_REG_STS(alg_data)));
- bus_reset_if_active(adap);
+ bus_reset_if_active(alg_data);
/* Process transactions in a loop. */
for (i = 0; rc >= 0 && i < num; i++) {
@@ -464,9 +463,9 @@
addr = pmsg->addr;
if (pmsg->flags & I2C_M_TEN) {
- dev_err(&adap->dev,
+ dev_err(&alg_data->adapter.dev,
"%s: 10 bits addr not supported!\n",
- adap->name);
+ alg_data->adapter.name);
rc = -EINVAL;
break;
}
@@ -478,11 +477,10 @@
alg_data->mif.ret = 0;
alg_data->last = (i == num - 1);
- dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__,
- alg_data->mif.mode,
- alg_data->mif.len);
+ dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
+ __func__, alg_data->mif.mode, alg_data->mif.len);
- i2c_pnx_arm_timer(adap);
+ i2c_pnx_arm_timer(alg_data);
/* initialize the completion var */
init_completion(&alg_data->mif.complete);
@@ -493,7 +491,7 @@
I2C_REG_CTL(alg_data));
/* Put start-code and slave-address on the bus. */
- rc = i2c_pnx_start(addr, adap);
+ rc = i2c_pnx_start(addr, alg_data);
if (rc < 0)
break;
@@ -502,31 +500,32 @@
if (!(rc = alg_data->mif.ret))
completed++;
- dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Complete, return code = %d.\n",
__func__, rc);
/* Clear TDI and AFI bits in case they are set. */
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
- dev_dbg(&adap->dev,
+ dev_dbg(&alg_data->adapter.dev,
"%s: TDI still set... clearing now.\n",
- adap->name);
+ alg_data->adapter.name);
iowrite32(stat, I2C_REG_STS(alg_data));
}
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
- dev_dbg(&adap->dev,
+ dev_dbg(&alg_data->adapter.dev,
"%s: AFI still set... clearing now.\n",
- adap->name);
+ alg_data->adapter.name);
iowrite32(stat, I2C_REG_STS(alg_data));
}
}
- bus_reset_if_active(adap);
+ bus_reset_if_active(alg_data);
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
- dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+ dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
if (completed != num)
@@ -545,69 +544,92 @@
.functionality = i2c_pnx_func,
};
+#ifdef CONFIG_PM
static int i2c_pnx_controller_suspend(struct platform_device *pdev,
pm_message_t state)
{
- struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
- return i2c_pnx->suspend(pdev, state);
+ struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+ /* FIXME: shouldn't this be clk_disable? */
+ clk_enable(alg_data->clk);
+
+ return 0;
}
static int i2c_pnx_controller_resume(struct platform_device *pdev)
{
- struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
- return i2c_pnx->resume(pdev);
+ struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+ return clk_enable(alg_data->clk);
}
+#else
+#define i2c_pnx_controller_suspend NULL
+#define i2c_pnx_controller_resume NULL
+#endif
static int __devinit i2c_pnx_probe(struct platform_device *pdev)
{
unsigned long tmp;
int ret = 0;
struct i2c_pnx_algo_data *alg_data;
- int freq_mhz;
+ unsigned long freq;
struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
- if (!i2c_pnx || !i2c_pnx->adapter) {
+ if (!i2c_pnx || !i2c_pnx->name) {
dev_err(&pdev->dev, "%s: no platform data supplied\n",
__func__);
ret = -EINVAL;
goto out;
}
- platform_set_drvdata(pdev, i2c_pnx);
-
- if (i2c_pnx->calculate_input_freq)
- freq_mhz = i2c_pnx->calculate_input_freq(pdev);
- else {
- freq_mhz = PNX_DEFAULT_FREQ;
- dev_info(&pdev->dev, "Setting bus frequency to default value: "
- "%d MHz\n", freq_mhz);
+ alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
+ if (!alg_data) {
+ ret = -ENOMEM;
+ goto err_kzalloc;
}
- i2c_pnx->adapter->algo = &pnx_algorithm;
+ platform_set_drvdata(pdev, alg_data);
- alg_data = i2c_pnx->adapter->algo_data;
- init_timer(&alg_data->mif.timer);
- alg_data->mif.timer.function = i2c_pnx_timeout;
- alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+ strlcpy(alg_data->adapter.name, i2c_pnx->name,
+ sizeof(alg_data->adapter.name));
+ alg_data->adapter.dev.parent = &pdev->dev;
+ alg_data->adapter.algo = &pnx_algorithm;
+ alg_data->adapter.algo_data = alg_data;
+ alg_data->adapter.nr = pdev->id;
+ alg_data->i2c_pnx = i2c_pnx;
- /* Register I/O resource */
- if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE,
- pdev->name)) {
- dev_err(&pdev->dev,
- "I/O region 0x%08x for I2C already in use.\n",
- alg_data->base);
- ret = -ENODEV;
+ alg_data->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(alg_data->clk)) {
+ ret = PTR_ERR(alg_data->clk);
goto out_drvdata;
}
- if (!(alg_data->ioaddr =
- (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+ init_timer(&alg_data->mif.timer);
+ alg_data->mif.timer.function = i2c_pnx_timeout;
+ alg_data->mif.timer.data = (unsigned long)alg_data;
+
+ /* Register I/O resource */
+ if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
+ pdev->name)) {
+ dev_err(&pdev->dev,
+ "I/O region 0x%08x for I2C already in use.\n",
+ i2c_pnx->base);
+ ret = -ENODEV;
+ goto out_clkget;
+ }
+
+ alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+ if (!alg_data->ioaddr) {
dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
ret = -ENOMEM;
goto out_release;
}
- i2c_pnx->set_clock_run(pdev);
+ ret = clk_enable(alg_data->clk);
+ if (ret)
+ goto out_unmap;
+
+ freq = clk_get_rate(alg_data->clk);
/*
* Clock Divisor High This value is the number of system clocks
@@ -620,45 +642,47 @@
* the deglitching filter length.
*/
- tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
iowrite32(tmp, I2C_REG_CKH(alg_data));
iowrite32(tmp, I2C_REG_CKL(alg_data));
iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
ret = -ENODEV;
- goto out_unmap;
+ goto out_clock;
}
init_completion(&alg_data->mif.complete);
- ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
- 0, pdev->name, i2c_pnx->adapter);
+ ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
+ 0, pdev->name, alg_data);
if (ret)
goto out_clock;
/* Register this adapter with the I2C subsystem */
- i2c_pnx->adapter->dev.parent = &pdev->dev;
- i2c_pnx->adapter->nr = pdev->id;
- ret = i2c_add_numbered_adapter(i2c_pnx->adapter);
+ ret = i2c_add_numbered_adapter(&alg_data->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "I2C: Failed to add bus\n");
goto out_irq;
}
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
- i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+ alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
return 0;
out_irq:
- free_irq(alg_data->irq, i2c_pnx->adapter);
+ free_irq(i2c_pnx->irq, alg_data);
out_clock:
- i2c_pnx->set_clock_stop(pdev);
+ clk_disable(alg_data->clk);
out_unmap:
- iounmap((void *)alg_data->ioaddr);
+ iounmap(alg_data->ioaddr);
out_release:
- release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+out_clkget:
+ clk_put(alg_data->clk);
out_drvdata:
+ kfree(alg_data);
+err_kzalloc:
platform_set_drvdata(pdev, NULL);
out:
return ret;
@@ -666,15 +690,16 @@
static int __devexit i2c_pnx_remove(struct platform_device *pdev)
{
- struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
- struct i2c_adapter *adap = i2c_pnx->adapter;
- struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+ struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
- free_irq(alg_data->irq, i2c_pnx->adapter);
- i2c_del_adapter(adap);
- i2c_pnx->set_clock_stop(pdev);
- iounmap((void *)alg_data->ioaddr);
- release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ free_irq(i2c_pnx->irq, alg_data);
+ i2c_del_adapter(&alg_data->adapter);
+ clk_disable(alg_data->clk);
+ iounmap(alg_data->ioaddr);
+ release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+ clk_put(alg_data->clk);
+ kfree(alg_data);
platform_set_drvdata(pdev, NULL);
return 0;
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index c0cf45a..5cb01e5 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -108,11 +108,11 @@
* Returns 0 on success, <0 on error.
*/
static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
- acpi_integer *pcidevfn)
+ u64 *pcidevfn)
{
struct pci_dev *pdev = to_pci_dev(dev);
unsigned int bus, devnum, func;
- acpi_integer addr;
+ u64 addr;
acpi_handle dev_handle;
acpi_status status;
struct acpi_device_info *dinfo = NULL;
@@ -122,7 +122,7 @@
devnum = PCI_SLOT(pdev->devfn);
func = PCI_FUNC(pdev->devfn);
/* ACPI _ADR encoding for PCI bus: */
- addr = (acpi_integer)(devnum << 16 | func);
+ addr = (u64)(devnum << 16 | func);
DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
@@ -169,7 +169,7 @@
{
struct device *dev = hwif->gendev.parent;
acpi_handle uninitialized_var(dev_handle);
- acpi_integer pcidevfn;
+ u64 pcidevfn;
acpi_handle chan_handle;
int err;
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 7f87801..3b128dc 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -679,7 +679,7 @@
if (max_s > hwif->rqsize)
max_s = hwif->rqsize;
- blk_queue_max_sectors(q, max_s);
+ blk_queue_max_hw_sectors(q, max_s);
}
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index fefbdfc..efd9076 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -486,7 +486,7 @@
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
drive->pc_delay = IDEFLOPPY_PC_DELAY;
- blk_queue_max_sectors(drive->queue, 64);
+ blk_queue_max_hw_sectors(drive->queue, 64);
}
/*
@@ -494,7 +494,7 @@
* nasty clicking noises without it, so please don't remove this.
*/
if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
- blk_queue_max_sectors(drive->queue, 64);
+ blk_queue_max_hw_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
/* IOMEGA Clik! drives do not support lock/unlock commands */
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4d76ba4..f8c1ae6 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -774,7 +774,7 @@
if (hwif->rqsize < max_sectors)
max_sectors = hwif->rqsize;
- blk_queue_max_sectors(q, max_sectors);
+ blk_queue_max_hw_sectors(q, max_sectors);
#ifdef CONFIG_PCI
/* When we have an IOMMU, we may have a problem where pci_map_sg()
@@ -790,8 +790,7 @@
max_sg_entries >>= 1;
#endif /* CONFIG_PCI */
- blk_queue_max_hw_segments(q, max_sg_entries);
- blk_queue_max_phys_segments(q, max_sg_entries);
+ blk_queue_max_segments(q, max_sg_entries);
/* assign drive queue */
drive->queue = q;
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f199896..c88696a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -2020,7 +2020,7 @@
if (lu->workarounds & SBP2_WORKAROUND_POWER_CONDITION)
sdev->start_stop_pwr_cond = 1;
if (lu->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
- blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
+ blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512);
blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE);
return 0;
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 258c639..9f9816b 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -278,6 +278,8 @@
goto err_free_client;
file->private_data = client;
+ nonseekable_open(inode, file);
+
return 0;
err_free_client:
diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index b04930f..7392992 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -46,7 +46,7 @@
int size;
};
-static struct pci_device_id emu_tbl[] = {
+static const struct pci_device_id emu_tbl[] = {
{ 0x1102, 0x7002, PCI_ANY_ID, PCI_ANY_ID }, /* SB Live gameport */
{ 0x1102, 0x7003, PCI_ANY_ID, PCI_ANY_ID }, /* Audigy gameport */
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index 8a1810f..14d3f3e 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -140,7 +140,7 @@
}
}
-static struct pci_device_id fm801_gp_id_table[] = {
+static const struct pci_device_id fm801_gp_id_table[] = {
{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0 }
};
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ac11be0..7e18bcf 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -11,6 +11,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/stddef.h>
#include <linux/module.h>
#include <linux/ioport.h>
@@ -190,9 +192,8 @@
error = device_bind_driver(&gameport->dev);
if (error) {
- printk(KERN_WARNING
- "gameport: device_bind_driver() failed "
- "for %s (%s) and %s, error: %d\n",
+ dev_warn(&gameport->dev,
+ "device_bind_driver() failed for %s (%s) and %s, error: %d\n",
gameport->phys, gameport->name,
drv->description, error);
drv->disconnect(gameport);
@@ -209,9 +210,9 @@
error = device_attach(&gameport->dev);
if (error < 0)
- printk(KERN_WARNING
- "gameport: device_attach() failed for %s (%s), error: %d\n",
- gameport->phys, gameport->name, error);
+ dev_warn(&gameport->dev,
+ "device_attach() failed for %s (%s), error: %d\n",
+ gameport->phys, gameport->name, error);
}
@@ -262,17 +263,14 @@
event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
if (!event) {
- printk(KERN_ERR
- "gameport: Not enough memory to queue event %d\n",
- event_type);
+ pr_err("Not enough memory to queue event %d\n", event_type);
retval = -ENOMEM;
goto out;
}
if (!try_module_get(owner)) {
- printk(KERN_WARNING
- "gameport: Can't get module reference, dropping event %d\n",
- event_type);
+ pr_warning("Can't get module reference, dropping event %d\n",
+ event_type);
kfree(event);
retval = -EINVAL;
goto out;
@@ -298,14 +296,12 @@
static void gameport_remove_duplicate_events(struct gameport_event *event)
{
- struct list_head *node, *next;
- struct gameport_event *e;
+ struct gameport_event *e, *next;
unsigned long flags;
spin_lock_irqsave(&gameport_event_lock, flags);
- list_for_each_safe(node, next, &gameport_event_list) {
- e = list_entry(node, struct gameport_event, node);
+ list_for_each_entry_safe(e, next, &gameport_event_list, node) {
if (event->object == e->object) {
/*
* If this event is of different type we should not
@@ -315,7 +311,7 @@
if (event->type != e->type)
break;
- list_del_init(node);
+ list_del_init(&e->node);
gameport_free_event(e);
}
}
@@ -325,23 +321,18 @@
static struct gameport_event *gameport_get_event(void)
{
- struct gameport_event *event;
- struct list_head *node;
+ struct gameport_event *event = NULL;
unsigned long flags;
spin_lock_irqsave(&gameport_event_lock, flags);
- if (list_empty(&gameport_event_list)) {
- spin_unlock_irqrestore(&gameport_event_lock, flags);
- return NULL;
+ if (!list_empty(&gameport_event_list)) {
+ event = list_first_entry(&gameport_event_list,
+ struct gameport_event, node);
+ list_del_init(&event->node);
}
- node = gameport_event_list.next;
- event = list_entry(node, struct gameport_event, node);
- list_del_init(node);
-
spin_unlock_irqrestore(&gameport_event_lock, flags);
-
return event;
}
@@ -360,16 +351,14 @@
if ((event = gameport_get_event())) {
switch (event->type) {
- case GAMEPORT_REGISTER_PORT:
- gameport_add_port(event->object);
- break;
- case GAMEPORT_ATTACH_DRIVER:
- gameport_attach_driver(event->object);
- break;
+ case GAMEPORT_REGISTER_PORT:
+ gameport_add_port(event->object);
+ break;
- default:
- break;
+ case GAMEPORT_ATTACH_DRIVER:
+ gameport_attach_driver(event->object);
+ break;
}
gameport_remove_duplicate_events(event);
@@ -385,16 +374,14 @@
*/
static void gameport_remove_pending_events(void *object)
{
- struct list_head *node, *next;
- struct gameport_event *event;
+ struct gameport_event *event, *next;
unsigned long flags;
spin_lock_irqsave(&gameport_event_lock, flags);
- list_for_each_safe(node, next, &gameport_event_list) {
- event = list_entry(node, struct gameport_event, node);
+ list_for_each_entry_safe(event, next, &gameport_event_list, node) {
if (event->object == object) {
- list_del_init(node);
+ list_del_init(&event->node);
gameport_free_event(event);
}
}
@@ -441,7 +428,6 @@
kthread_should_stop() || !list_empty(&gameport_event_list));
} while (!kthread_should_stop());
- printk(KERN_DEBUG "gameport: kgameportd exiting\n");
return 0;
}
@@ -453,6 +439,7 @@
static ssize_t gameport_show_description(struct device *dev, struct device_attribute *attr, char *buf)
{
struct gameport *gameport = to_gameport_port(dev);
+
return sprintf(buf, "%s\n", gameport->name);
}
@@ -521,7 +508,8 @@
mutex_init(&gameport->drv_mutex);
device_initialize(&gameport->dev);
- dev_set_name(&gameport->dev, "gameport%lu", (unsigned long)atomic_inc_return(&gameport_no) - 1);
+ dev_set_name(&gameport->dev, "gameport%lu",
+ (unsigned long)atomic_inc_return(&gameport_no) - 1);
gameport->dev.bus = &gameport_bus;
gameport->dev.release = gameport_release_port;
if (gameport->parent)
@@ -550,19 +538,17 @@
list_add_tail(&gameport->node, &gameport_list);
if (gameport->io)
- printk(KERN_INFO "gameport: %s is %s, io %#x, speed %dkHz\n",
- gameport->name, gameport->phys, gameport->io, gameport->speed);
+ dev_info(&gameport->dev, "%s is %s, io %#x, speed %dkHz\n",
+ gameport->name, gameport->phys, gameport->io, gameport->speed);
else
- printk(KERN_INFO "gameport: %s is %s, speed %dkHz\n",
+ dev_info(&gameport->dev, "%s is %s, speed %dkHz\n",
gameport->name, gameport->phys, gameport->speed);
error = device_add(&gameport->dev);
if (error)
- printk(KERN_ERR
- "gameport: device_add() failed for %s (%s), error: %d\n",
+ dev_err(&gameport->dev,
+ "device_add() failed for %s (%s), error: %d\n",
gameport->phys, gameport->name, error);
- else
- gameport->registered = 1;
}
/*
@@ -584,10 +570,8 @@
gameport->parent = NULL;
}
- if (gameport->registered) {
+ if (device_is_registered(&gameport->dev))
device_del(&gameport->dev);
- gameport->registered = 0;
- }
list_del_init(&gameport->node);
@@ -705,8 +689,7 @@
error = driver_attach(&drv->driver);
if (error)
- printk(KERN_ERR
- "gameport: driver_attach() failed for %s, error: %d\n",
+ pr_err("driver_attach() failed for %s, error: %d\n",
drv->driver.name, error);
}
@@ -727,8 +710,7 @@
error = driver_register(&drv->driver);
if (error) {
- printk(KERN_ERR
- "gameport: driver_register() failed for %s, error: %d\n",
+ pr_err("driver_register() failed for %s, error: %d\n",
drv->driver.name, error);
return error;
}
@@ -828,7 +810,7 @@
error = bus_register(&gameport_bus);
if (error) {
- printk(KERN_ERR "gameport: failed to register gameport bus, error: %d\n", error);
+ pr_err("failed to register gameport bus, error: %d\n", error);
return error;
}
@@ -836,7 +818,7 @@
if (IS_ERR(gameport_task)) {
bus_unregister(&gameport_bus);
error = PTR_ERR(gameport_task);
- printk(KERN_ERR "gameport: Failed to start kgameportd, error: %d\n", error);
+ pr_err("Failed to start kgameportd, error: %d\n", error);
return error;
}
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index db556b7..7c21784 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -166,7 +166,7 @@
#ifdef CONFIG_PNP
-static struct pnp_device_id pnp_devids[] = {
+static const struct pnp_device_id pnp_devids[] = {
{ .id = "@P@0001", .driver_data = 0 }, /* ALS 100 */
{ .id = "@P@0020", .driver_data = 0 }, /* ALS 200 */
{ .id = "@P@1001", .driver_data = 0 }, /* ALS 100+ */
diff --git a/drivers/input/input-compat.h b/drivers/input/input-compat.h
index 47cd9ea..4d8ea32 100644
--- a/drivers/input/input-compat.h
+++ b/drivers/input/input-compat.h
@@ -21,8 +21,6 @@
you why the ifdefs are needed? Think about it again. -AK */
#ifdef CONFIG_X86_64
# define INPUT_COMPAT_TEST is_compat_task()
-#elif defined(CONFIG_IA64)
-# define INPUT_COMPAT_TEST IS_IA32_PROCESS(task_pt_regs(current))
#elif defined(CONFIG_S390)
# define INPUT_COMPAT_TEST test_thread_flag(TIF_31BIT)
#elif defined(CONFIG_MIPS)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 86cb2d2..41168d5 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -87,12 +87,14 @@
}
/*
- * Pass event through all open handles. This function is called with
+ * Pass event first through all filters and then, if event has not been
+ * filtered out, through all open handles. This function is called with
* dev->event_lock held and interrupts disabled.
*/
static void input_pass_event(struct input_dev *dev,
unsigned int type, unsigned int code, int value)
{
+ struct input_handler *handler;
struct input_handle *handle;
rcu_read_lock();
@@ -100,11 +102,25 @@
handle = rcu_dereference(dev->grab);
if (handle)
handle->handler->event(handle, type, code, value);
- else
- list_for_each_entry_rcu(handle, &dev->h_list, d_node)
- if (handle->open)
- handle->handler->event(handle,
- type, code, value);
+ else {
+ bool filtered = false;
+
+ list_for_each_entry_rcu(handle, &dev->h_list, d_node) {
+ if (!handle->open)
+ continue;
+
+ handler = handle->handler;
+ if (!handler->filter) {
+ if (filtered)
+ break;
+
+ handler->event(handle, type, code, value);
+
+ } else if (handler->filter(handle, type, code, value))
+ filtered = true;
+ }
+ }
+
rcu_read_unlock();
}
@@ -615,12 +631,12 @@
}
}
- clear_bit(old_keycode, dev->keybit);
- set_bit(keycode, dev->keybit);
+ __clear_bit(old_keycode, dev->keybit);
+ __set_bit(keycode, dev->keybit);
for (i = 0; i < dev->keycodemax; i++) {
if (input_fetch_keycode(dev, i) == old_keycode) {
- set_bit(old_keycode, dev->keybit);
+ __set_bit(old_keycode, dev->keybit);
break; /* Setting the bit twice is useless, so break */
}
}
@@ -678,6 +694,9 @@
if (retval)
goto out;
+ /* Make sure KEY_RESERVED did not get enabled. */
+ __clear_bit(KEY_RESERVED, dev->keybit);
+
/*
* Simulate keyup event if keycode is not present
* in the keymap anymore
@@ -705,12 +724,13 @@
if (i != BITS_TO_LONGS(max)) \
continue;
-static const struct input_device_id *input_match_device(const struct input_device_id *id,
+static const struct input_device_id *input_match_device(struct input_handler *handler,
struct input_dev *dev)
{
+ const struct input_device_id *id;
int i;
- for (; id->flags || id->driver_info; id++) {
+ for (id = handler->id_table; id->flags || id->driver_info; id++) {
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->bustype != dev->id.bustype)
@@ -738,7 +758,8 @@
MATCH_BIT(ffbit, FF_MAX);
MATCH_BIT(swbit, SW_MAX);
- return id;
+ if (!handler->match || handler->match(handler, dev))
+ return id;
}
return NULL;
@@ -749,10 +770,7 @@
const struct input_device_id *id;
int error;
- if (handler->blacklist && input_match_device(handler->blacklist, dev))
- return -ENODEV;
-
- id = input_match_device(handler->id_table, dev);
+ id = input_match_device(handler, dev);
if (!id)
return -ENODEV;
@@ -988,6 +1006,8 @@
union input_seq_state *state = (union input_seq_state *)&seq->private;
seq_printf(seq, "N: Number=%u Name=%s", state->pos, handler->name);
+ if (handler->filter)
+ seq_puts(seq, " (filter)");
if (handler->fops)
seq_printf(seq, " Minor=%d", handler->minor);
seq_putc(seq, '\n');
@@ -1551,6 +1571,25 @@
}
EXPORT_SYMBOL(input_set_capability);
+#define INPUT_CLEANSE_BITMASK(dev, type, bits) \
+ do { \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ memset(dev->bits##bit, 0, \
+ sizeof(dev->bits##bit)); \
+ } while (0)
+
+static void input_cleanse_bitmasks(struct input_dev *dev)
+{
+ INPUT_CLEANSE_BITMASK(dev, KEY, key);
+ INPUT_CLEANSE_BITMASK(dev, REL, rel);
+ INPUT_CLEANSE_BITMASK(dev, ABS, abs);
+ INPUT_CLEANSE_BITMASK(dev, MSC, msc);
+ INPUT_CLEANSE_BITMASK(dev, LED, led);
+ INPUT_CLEANSE_BITMASK(dev, SND, snd);
+ INPUT_CLEANSE_BITMASK(dev, FF, ff);
+ INPUT_CLEANSE_BITMASK(dev, SW, sw);
+}
+
/**
* input_register_device - register device with input core
* @dev: device to be registered
@@ -1570,13 +1609,19 @@
const char *path;
int error;
+ /* Every input device generates EV_SYN/SYN_REPORT events. */
__set_bit(EV_SYN, dev->evbit);
+ /* KEY_RESERVED is not supposed to be transmitted to userspace. */
+ __clear_bit(KEY_RESERVED, dev->keybit);
+
+ /* Make sure that bitmasks not mentioned in dev->evbit are clean. */
+ input_cleanse_bitmasks(dev);
+
/*
* If delay and period are pre-set by the driver, then autorepeating
* is handled by the driver itself and we don't do it in input.c.
*/
-
init_timer(&dev->timer);
if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
dev->timer.data = (long) dev;
@@ -1776,7 +1821,16 @@
error = mutex_lock_interruptible(&dev->mutex);
if (error)
return error;
- list_add_tail_rcu(&handle->d_node, &dev->h_list);
+
+ /*
+ * Filters go to the head of the list, normal handlers
+ * to the tail.
+ */
+ if (handler->filter)
+ list_add_rcu(&handle->d_node, &dev->h_list);
+ else
+ list_add_tail_rcu(&handle->d_node, &dev->h_list);
+
mutex_unlock(&dev->mutex);
/*
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index b1bd6dd..c52bec4 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -286,6 +286,8 @@
goto err_free_client;
file->private_data = client;
+ nonseekable_open(inode, file);
+
return 0;
err_free_client:
@@ -775,6 +777,20 @@
input_close_device(handle);
}
+
+static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
+{
+ /* Avoid touchpads and touchscreens */
+ if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
+ return false;
+
+ /* Avoid tablets, digitisers and similar devices */
+ if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
+ return false;
+
+ return true;
+}
+
static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
const struct input_device_id *id)
{
@@ -894,22 +910,6 @@
put_device(&joydev->dev);
}
-static const struct input_device_id joydev_blacklist[] = {
- {
- .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
- INPUT_DEVICE_ID_MATCH_KEYBIT,
- .evbit = { BIT_MASK(EV_KEY) },
- .keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
- }, /* Avoid itouchpads and touchscreens */
- {
- .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
- INPUT_DEVICE_ID_MATCH_KEYBIT,
- .evbit = { BIT_MASK(EV_KEY) },
- .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
- }, /* Avoid tablets, digitisers and similar devices */
- { } /* Terminating entry */
-};
-
static const struct input_device_id joydev_ids[] = {
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
@@ -936,13 +936,13 @@
static struct input_handler joydev_handler = {
.event = joydev_event,
+ .match = joydev_match,
.connect = joydev_connect,
.disconnect = joydev_disconnect,
.fops = &joydev_fops,
.minor = JOYDEV_MINOR_BASE,
.name = "joydev",
.id_table = joydev_ids,
- .blacklist = joydev_blacklist,
};
static int __init joydev_init(void)
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index b1141959..5b59616 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -221,6 +221,7 @@
config JOYSTICK_GAMECON
tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads"
depends on PARPORT
+ select INPUT_FF_MEMLESS
---help---
Say Y here if you have a Nintendo Entertainment System gamepad,
Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad,
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 07a32af..ae998d9 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -30,6 +30,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/module.h>
@@ -61,48 +63,73 @@
/* see also gs_psx_delay parameter in PSX support section */
-#define GC_SNES 1
-#define GC_NES 2
-#define GC_NES4 3
-#define GC_MULTI 4
-#define GC_MULTI2 5
-#define GC_N64 6
-#define GC_PSX 7
-#define GC_DDR 8
-#define GC_SNESMOUSE 9
-
-#define GC_MAX 9
+enum gc_type {
+ GC_NONE = 0,
+ GC_SNES,
+ GC_NES,
+ GC_NES4,
+ GC_MULTI,
+ GC_MULTI2,
+ GC_N64,
+ GC_PSX,
+ GC_DDR,
+ GC_SNESMOUSE,
+ GC_MAX
+};
#define GC_REFRESH_TIME HZ/100
+struct gc_pad {
+ struct input_dev *dev;
+ enum gc_type type;
+ char phys[32];
+};
+
struct gc {
struct pardevice *pd;
+ struct gc_pad pads[GC_MAX_DEVICES];
struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
- unsigned char pads[GC_MAX + 1];
+ int pad_count[GC_MAX];
int used;
struct mutex mutex;
- char phys[GC_MAX_DEVICES][32];
+};
+
+struct gc_subdev {
+ unsigned int idx;
};
static struct gc *gc_base[3];
-static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
+static const int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
-static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
- "Multisystem 2-button joystick", "N64 controller", "PSX controller",
- "PSX DDR controller", "SNES mouse" };
+static const char *gc_names[] = {
+ NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
+ "Multisystem 2-button joystick", "N64 controller", "PSX controller",
+ "PSX DDR controller", "SNES mouse"
+};
+
/*
* N64 support.
*/
-static unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 };
-static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START };
+static const unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 };
+static const short gc_n64_btn[] = {
+ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z,
+ BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START
+};
#define GC_N64_LENGTH 32 /* N64 bit length, not including stop bit */
-#define GC_N64_REQUEST_LENGTH 37 /* transmit request sequence is 9 bits long */
+#define GC_N64_STOP_LENGTH 5 /* Length of encoded stop bit */
+#define GC_N64_CMD_00 0x11111111UL
+#define GC_N64_CMD_01 0xd1111111UL
+#define GC_N64_CMD_03 0xdd111111UL
+#define GC_N64_CMD_1b 0xdd1dd111UL
+#define GC_N64_CMD_c0 0x111111ddUL
+#define GC_N64_CMD_80 0x1111111dUL
+#define GC_N64_STOP_BIT 0x1d /* Encoded stop bit */
+#define GC_N64_REQUEST_DATA GC_N64_CMD_01 /* the request data command */
#define GC_N64_DELAY 133 /* delay between transmit request, and response ready (us) */
-#define GC_N64_REQUEST 0x1dd1111111ULL /* the request data command (encoded for 000000011) */
#define GC_N64_DWS 3 /* delay between write segments (required for sound playback because of ISA DMA) */
/* GC_N64_DWS > 24 is known to fail */
#define GC_N64_POWER_W 0xe2 /* power during write (transmit request) */
@@ -114,8 +141,40 @@
#define GC_N64_CLOCK 0x02 /* clock bits for read */
/*
+ * Used for rumble code.
+ */
+
+/* Send encoded command */
+static void gc_n64_send_command(struct gc *gc, unsigned long cmd,
+ unsigned char target)
+{
+ struct parport *port = gc->pd->port;
+ int i;
+
+ for (i = 0; i < GC_N64_LENGTH; i++) {
+ unsigned char data = (cmd >> i) & 1 ? target : 0;
+ parport_write_data(port, GC_N64_POWER_W | data);
+ udelay(GC_N64_DWS);
+ }
+}
+
+/* Send stop bit */
+static void gc_n64_send_stop_bit(struct gc *gc, unsigned char target)
+{
+ struct parport *port = gc->pd->port;
+ int i;
+
+ for (i = 0; i < GC_N64_STOP_LENGTH; i++) {
+ unsigned char data = (GC_N64_STOP_BIT >> i) & 1 ? target : 0;
+ parport_write_data(port, GC_N64_POWER_W | data);
+ udelay(GC_N64_DWS);
+ }
+}
+
+/*
* gc_n64_read_packet() reads an N64 packet.
- * Each pad uses one bit per byte. So all pads connected to this port are read in parallel.
+ * Each pad uses one bit per byte. So all pads connected to this port
+ * are read in parallel.
*/
static void gc_n64_read_packet(struct gc *gc, unsigned char *data)
@@ -128,14 +187,13 @@
*/
local_irq_save(flags);
- for (i = 0; i < GC_N64_REQUEST_LENGTH; i++) {
- parport_write_data(gc->pd->port, GC_N64_POWER_W | ((GC_N64_REQUEST >> i) & 1 ? GC_N64_OUT : 0));
- udelay(GC_N64_DWS);
- }
+ gc_n64_send_command(gc, GC_N64_REQUEST_DATA, GC_N64_OUT);
+ gc_n64_send_stop_bit(gc, GC_N64_OUT);
local_irq_restore(flags);
/*
- * Wait for the pad response to be loaded into the 33-bit register of the adapter
+ * Wait for the pad response to be loaded into the 33-bit register
+ * of the adapter.
*/
udelay(GC_N64_DELAY);
@@ -146,13 +204,15 @@
for (i = 0; i < GC_N64_LENGTH; i++) {
parport_write_data(gc->pd->port, GC_N64_POWER_R);
+ udelay(2);
data[i] = parport_read_status(gc->pd->port);
parport_write_data(gc->pd->port, GC_N64_POWER_R | GC_N64_CLOCK);
}
/*
- * We must wait 200 ms here for the controller to reinitialize before the next read request.
- * No worries as long as gc_read is polled less frequently than this.
+ * We must wait 200 ms here for the controller to reinitialize before
+ * the next read request. No worries as long as gc_read is polled less
+ * frequently than this.
*/
}
@@ -160,45 +220,112 @@
static void gc_n64_process_packet(struct gc *gc)
{
unsigned char data[GC_N64_LENGTH];
- signed char axes[2];
struct input_dev *dev;
int i, j, s;
+ signed char x, y;
gc_n64_read_packet(gc, data);
for (i = 0; i < GC_MAX_DEVICES; i++) {
- dev = gc->dev[i];
- if (!dev)
+ if (gc->pads[i].type != GC_N64)
continue;
+ dev = gc->pads[i].dev;
s = gc_status_bit[i];
- if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) {
+ if (s & ~(data[8] | data[9])) {
- axes[0] = axes[1] = 0;
+ x = y = 0;
for (j = 0; j < 8; j++) {
if (data[23 - j] & s)
- axes[0] |= 1 << j;
+ x |= 1 << j;
if (data[31 - j] & s)
- axes[1] |= 1 << j;
+ y |= 1 << j;
}
- input_report_abs(dev, ABS_X, axes[0]);
- input_report_abs(dev, ABS_Y, -axes[1]);
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, -y);
- input_report_abs(dev, ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(dev, ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
+ input_report_abs(dev, ABS_HAT0X,
+ !(s & data[6]) - !(s & data[7]));
+ input_report_abs(dev, ABS_HAT0Y,
+ !(s & data[4]) - !(s & data[5]));
for (j = 0; j < 10; j++)
- input_report_key(dev, gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
+ input_report_key(dev, gc_n64_btn[j],
+ s & data[gc_n64_bytes[j]]);
input_sync(dev);
}
}
}
+static int gc_n64_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ int i;
+ unsigned long flags;
+ struct gc *gc = input_get_drvdata(dev);
+ struct gc_subdev *sdev = data;
+ unsigned char target = 1 << sdev->idx; /* select desired pin */
+
+ if (effect->type == FF_RUMBLE) {
+ struct ff_rumble_effect *rumble = &effect->u.rumble;
+ unsigned int cmd =
+ rumble->strong_magnitude || rumble->weak_magnitude ?
+ GC_N64_CMD_01 : GC_N64_CMD_00;
+
+ local_irq_save(flags);
+
+ /* Init Rumble - 0x03, 0x80, 0x01, (34)0x80 */
+ gc_n64_send_command(gc, GC_N64_CMD_03, target);
+ gc_n64_send_command(gc, GC_N64_CMD_80, target);
+ gc_n64_send_command(gc, GC_N64_CMD_01, target);
+ for (i = 0; i < 32; i++)
+ gc_n64_send_command(gc, GC_N64_CMD_80, target);
+ gc_n64_send_stop_bit(gc, target);
+
+ udelay(GC_N64_DELAY);
+
+ /* Now start or stop it - 0x03, 0xc0, 0zx1b, (32)0x01/0x00 */
+ gc_n64_send_command(gc, GC_N64_CMD_03, target);
+ gc_n64_send_command(gc, GC_N64_CMD_c0, target);
+ gc_n64_send_command(gc, GC_N64_CMD_1b, target);
+ for (i = 0; i < 32; i++)
+ gc_n64_send_command(gc, cmd, target);
+ gc_n64_send_stop_bit(gc, target);
+
+ local_irq_restore(flags);
+
+ }
+
+ return 0;
+}
+
+static int __init gc_n64_init_ff(struct input_dev *dev, int i)
+{
+ struct gc_subdev *sdev;
+ int err;
+
+ sdev = kmalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ sdev->idx = i;
+
+ input_set_capability(dev, EV_FF, FF_RUMBLE);
+
+ err = input_ff_create_memless(dev, sdev, gc_n64_play_effect);
+ if (err) {
+ kfree(sdev);
+ return err;
+ }
+
+ return 0;
+}
+
/*
* NES/SNES support.
*/
@@ -214,9 +341,11 @@
#define GC_NES_CLOCK 0x01
#define GC_NES_LATCH 0x02
-static unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 };
-static unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 };
-static short gc_snes_btn[] = { BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR };
+static const unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 };
+static const unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 };
+static const short gc_snes_btn[] = {
+ BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR
+};
/*
* gc_nes_read_packet() reads a NES/SNES packet.
@@ -244,40 +373,51 @@
static void gc_nes_process_packet(struct gc *gc)
{
unsigned char data[GC_SNESMOUSE_LENGTH];
+ struct gc_pad *pad;
struct input_dev *dev;
int i, j, s, len;
char x_rel, y_rel;
- len = gc->pads[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH :
- (gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH);
+ len = gc->pad_count[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH :
+ (gc->pad_count[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH);
gc_nes_read_packet(gc, len, data);
for (i = 0; i < GC_MAX_DEVICES; i++) {
+ pad = &gc->pads[i];
dev = gc->dev[i];
- if (!dev)
- continue;
-
s = gc_status_bit[i];
- if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
+ switch (pad->type) {
+
+ case GC_NES:
+
input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7]));
input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5]));
- }
- if (s & gc->pads[GC_NES])
for (j = 0; j < 4; j++)
- input_report_key(dev, gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
+ input_report_key(dev, gc_snes_btn[j],
+ s & data[gc_nes_bytes[j]]);
+ input_sync(dev);
+ break;
- if (s & gc->pads[GC_SNES])
+ case GC_SNES:
+
+ input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5]));
+
for (j = 0; j < 8; j++)
- input_report_key(dev, gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
+ input_report_key(dev, gc_snes_btn[j],
+ s & data[gc_snes_bytes[j]]);
+ input_sync(dev);
+ break;
- if (s & gc->pads[GC_SNESMOUSE]) {
+ case GC_SNESMOUSE:
/*
- * The 4 unused bits from SNES controllers appear to be ID bits
- * so use them to make sure iwe are dealing with a mouse.
+ * The 4 unused bits from SNES controllers appear
+ * to be ID bits so use them to make sure we are
+ * dealing with a mouse.
* gamepad is connected. This is important since
* my SNES gamepad sends 1's for bits 16-31, which
* cause the mouse pointer to quickly move to the
@@ -310,9 +450,14 @@
y_rel = -y_rel;
input_report_rel(dev, REL_Y, y_rel);
}
+
+ input_sync(dev);
}
+ break;
+
+ default:
+ break;
}
- input_sync(dev);
}
}
@@ -340,29 +485,35 @@
static void gc_multi_process_packet(struct gc *gc)
{
unsigned char data[GC_MULTI2_LENGTH];
+ int data_len = gc->pad_count[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH;
+ struct gc_pad *pad;
struct input_dev *dev;
int i, s;
- gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data);
+ gc_multi_read_packet(gc, data_len, data);
for (i = 0; i < GC_MAX_DEVICES; i++) {
-
- dev = gc->dev[i];
- if (!dev)
- continue;
-
+ pad = &gc->pads[i];
+ dev = pad->dev;
s = gc_status_bit[i];
- if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
- input_report_abs(dev, ABS_X, !(s & data[2]) - !(s & data[3]));
- input_report_abs(dev, ABS_Y, !(s & data[0]) - !(s & data[1]));
- input_report_key(dev, BTN_TRIGGER, s & data[4]);
- }
-
- if (s & gc->pads[GC_MULTI2])
+ switch (pad->type) {
+ case GC_MULTI2:
input_report_key(dev, BTN_THUMB, s & data[5]);
+ /* fall through */
- input_sync(dev);
+ case GC_MULTI:
+ input_report_abs(dev, ABS_X,
+ !(s & data[2]) - !(s & data[3]));
+ input_report_abs(dev, ABS_Y,
+ !(s & data[0]) - !(s & data[1]));
+ input_report_key(dev, BTN_TRIGGER, s & data[4]);
+ input_sync(dev);
+ break;
+
+ default:
+ break;
+ }
}
}
@@ -398,30 +549,41 @@
module_param_named(psx_delay, gc_psx_delay, uint, 0);
MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)");
-static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y };
-static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
- BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR };
-static short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
+static const short gc_psx_abs[] = {
+ ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y
+};
+static const short gc_psx_btn[] = {
+ BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
+ BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR
+};
+static const short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
/*
* gc_psx_command() writes 8bit command and reads 8bit data from
* the psx pad.
*/
-static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVICES])
+static void gc_psx_command(struct gc *gc, int b, unsigned char *data)
{
+ struct parport *port = gc->pd->port;
int i, j, cmd, read;
- for (i = 0; i < GC_MAX_DEVICES; i++)
- data[i] = 0;
+ memset(data, 0, GC_MAX_DEVICES);
for (i = 0; i < GC_PSX_LENGTH; i++, b >>= 1) {
cmd = (b & 1) ? GC_PSX_COMMAND : 0;
- parport_write_data(gc->pd->port, cmd | GC_PSX_POWER);
+ parport_write_data(port, cmd | GC_PSX_POWER);
udelay(gc_psx_delay);
- read = parport_read_status(gc->pd->port) ^ 0x80;
- for (j = 0; j < GC_MAX_DEVICES; j++)
- data[j] |= (read & gc_status_bit[j] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) ? (1 << i) : 0;
+
+ read = parport_read_status(port) ^ 0x80;
+
+ for (j = 0; j < GC_MAX_DEVICES; j++) {
+ struct gc_pad *pad = &gc->pads[i];
+
+ if (pad->type == GC_PSX || pad->type == GC_DDR)
+ data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
+ }
+
parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER);
udelay(gc_psx_delay);
}
@@ -432,31 +594,40 @@
* device identifier code.
*/
-static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES],
+static void gc_psx_read_packet(struct gc *gc,
+ unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES],
unsigned char id[GC_MAX_DEVICES])
{
int i, j, max_len = 0;
unsigned long flags;
unsigned char data2[GC_MAX_DEVICES];
- parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER); /* Select pad */
+ /* Select pad */
+ parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
udelay(gc_psx_delay);
- parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER); /* Deselect, begin command */
+ /* Deselect, begin command */
+ parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER);
udelay(gc_psx_delay);
local_irq_save(flags);
- gc_psx_command(gc, 0x01, data2); /* Access pad */
- gc_psx_command(gc, 0x42, id); /* Get device ids */
- gc_psx_command(gc, 0, data2); /* Dump status */
+ gc_psx_command(gc, 0x01, data2); /* Access pad */
+ gc_psx_command(gc, 0x42, id); /* Get device ids */
+ gc_psx_command(gc, 0, data2); /* Dump status */
- for (i =0; i < GC_MAX_DEVICES; i++) /* Find the longest pad */
- if((gc_status_bit[i] & (gc->pads[GC_PSX] | gc->pads[GC_DDR]))
- && (GC_PSX_LEN(id[i]) > max_len)
- && (GC_PSX_LEN(id[i]) <= GC_PSX_BYTES))
+ /* Find the longest pad */
+ for (i = 0; i < GC_MAX_DEVICES; i++) {
+ struct gc_pad *pad = &gc->pads[i];
+
+ if ((pad->type == GC_PSX || pad->type == GC_DDR) &&
+ GC_PSX_LEN(id[i]) > max_len &&
+ GC_PSX_LEN(id[i]) <= GC_PSX_BYTES) {
max_len = GC_PSX_LEN(id[i]);
+ }
+ }
- for (i = 0; i < max_len; i++) { /* Read in all the data */
+ /* Read in all the data */
+ for (i = 0; i < max_len; i++) {
gc_psx_command(gc, 0, data2);
for (j = 0; j < GC_MAX_DEVICES; j++)
data[j][i] = data2[j];
@@ -466,86 +637,104 @@
parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
- for(i = 0; i < GC_MAX_DEVICES; i++) /* Set id's to the real value */
+ /* Set id's to the real value */
+ for (i = 0; i < GC_MAX_DEVICES; i++)
id[i] = GC_PSX_ID(id[i]);
}
+static void gc_psx_report_one(struct gc_pad *pad, unsigned char psx_type,
+ unsigned char *data)
+{
+ struct input_dev *dev = pad->dev;
+ int i;
+
+ switch (psx_type) {
+
+ case GC_PSX_RUMBLE:
+
+ input_report_key(dev, BTN_THUMBL, ~data[0] & 0x04);
+ input_report_key(dev, BTN_THUMBR, ~data[0] & 0x02);
+
+ case GC_PSX_NEGCON:
+ case GC_PSX_ANALOG:
+
+ if (pad->type == GC_DDR) {
+ for (i = 0; i < 4; i++)
+ input_report_key(dev, gc_psx_ddr_btn[i],
+ ~data[0] & (0x10 << i));
+ } else {
+ for (i = 0; i < 4; i++)
+ input_report_abs(dev, gc_psx_abs[i + 2],
+ data[i + 2]);
+
+ input_report_abs(dev, ABS_X,
+ !!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127);
+ input_report_abs(dev, ABS_Y,
+ !!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127);
+ }
+
+ for (i = 0; i < 8; i++)
+ input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i));
+
+ input_report_key(dev, BTN_START, ~data[0] & 0x08);
+ input_report_key(dev, BTN_SELECT, ~data[0] & 0x01);
+
+ input_sync(dev);
+
+ break;
+
+ case GC_PSX_NORMAL:
+
+ if (pad->type == GC_DDR) {
+ for (i = 0; i < 4; i++)
+ input_report_key(dev, gc_psx_ddr_btn[i],
+ ~data[0] & (0x10 << i));
+ } else {
+ input_report_abs(dev, ABS_X,
+ !!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127);
+ input_report_abs(dev, ABS_Y,
+ !!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127);
+
+ /*
+ * For some reason if the extra axes are left unset
+ * they drift.
+ * for (i = 0; i < 4; i++)
+ input_report_abs(dev, gc_psx_abs[i + 2], 128);
+ * This needs to be debugged properly,
+ * maybe fuzz processing needs to be done
+ * in input_sync()
+ * --vojtech
+ */
+ }
+
+ for (i = 0; i < 8; i++)
+ input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i));
+
+ input_report_key(dev, BTN_START, ~data[0] & 0x08);
+ input_report_key(dev, BTN_SELECT, ~data[0] & 0x01);
+
+ input_sync(dev);
+
+ break;
+
+ default: /* not a pad, ignore */
+ break;
+ }
+}
+
static void gc_psx_process_packet(struct gc *gc)
{
unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES];
unsigned char id[GC_MAX_DEVICES];
- struct input_dev *dev;
- int i, j;
+ struct gc_pad *pad;
+ int i;
gc_psx_read_packet(gc, data, id);
for (i = 0; i < GC_MAX_DEVICES; i++) {
-
- dev = gc->dev[i];
- if (!dev)
- continue;
-
- switch (id[i]) {
-
- case GC_PSX_RUMBLE:
-
- input_report_key(dev, BTN_THUMBL, ~data[i][0] & 0x04);
- input_report_key(dev, BTN_THUMBR, ~data[i][0] & 0x02);
-
- case GC_PSX_NEGCON:
- case GC_PSX_ANALOG:
-
- if (gc->pads[GC_DDR] & gc_status_bit[i]) {
- for(j = 0; j < 4; j++)
- input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
- } else {
- for (j = 0; j < 4; j++)
- input_report_abs(dev, gc_psx_abs[j + 2], data[i][j + 2]);
-
- input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
- input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
- }
-
- for (j = 0; j < 8; j++)
- input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
-
- input_report_key(dev, BTN_START, ~data[i][0] & 0x08);
- input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
-
- input_sync(dev);
-
- break;
-
- case GC_PSX_NORMAL:
- if (gc->pads[GC_DDR] & gc_status_bit[i]) {
- for(j = 0; j < 4; j++)
- input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
- } else {
- input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
- input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
-
- /* for some reason if the extra axes are left unset they drift */
- /* for (j = 0; j < 4; j++)
- input_report_abs(dev, gc_psx_abs[j + 2], 128);
- * This needs to be debugged properly,
- * maybe fuzz processing needs to be done in input_sync()
- * --vojtech
- */
- }
-
- for (j = 0; j < 8; j++)
- input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
-
- input_report_key(dev, BTN_START, ~data[i][0] & 0x08);
- input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
-
- input_sync(dev);
-
- break;
-
- case 0: /* not a pad, ignore */
- break;
- }
+ pad = &gc->pads[i];
+ if (pad->type == GC_PSX || pad->type == GC_DDR)
+ gc_psx_report_one(pad, id[i], data[i]);
}
}
@@ -561,28 +750,31 @@
* N64 pads - must be read first, any read confuses them for 200 us
*/
- if (gc->pads[GC_N64])
+ if (gc->pad_count[GC_N64])
gc_n64_process_packet(gc);
/*
* NES and SNES pads or mouse
*/
- if (gc->pads[GC_NES] || gc->pads[GC_SNES] || gc->pads[GC_SNESMOUSE])
+ if (gc->pad_count[GC_NES] ||
+ gc->pad_count[GC_SNES] ||
+ gc->pad_count[GC_SNESMOUSE]) {
gc_nes_process_packet(gc);
+ }
/*
* Multi and Multi2 joysticks
*/
- if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2])
+ if (gc->pad_count[GC_MULTI] || gc->pad_count[GC_MULTI2])
gc_multi_process_packet(gc);
/*
* PSX controllers
*/
- if (gc->pads[GC_PSX] || gc->pads[GC_DDR])
+ if (gc->pad_count[GC_PSX] || gc->pad_count[GC_DDR])
gc_psx_process_packet(gc);
mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME);
@@ -622,25 +814,29 @@
static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
{
+ struct gc_pad *pad = &gc->pads[idx];
struct input_dev *input_dev;
int i;
-
- if (!pad_type)
- return 0;
+ int err;
if (pad_type < 1 || pad_type > GC_MAX) {
- printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type);
+ pr_err("Pad type %d unknown\n", pad_type);
return -EINVAL;
}
- gc->dev[idx] = input_dev = input_allocate_device();
+ pad->dev = input_dev = input_allocate_device();
if (!input_dev) {
- printk(KERN_ERR "gamecon.c: Not enough memory for input device\n");
+ pr_err("Not enough memory for input device\n");
return -ENOMEM;
}
+ pad->type = pad_type;
+
+ snprintf(pad->phys, sizeof(pad->phys),
+ "%s/input%d", gc->pd->port->name, idx);
+
input_dev->name = gc_names[pad_type];
- input_dev->phys = gc->phys[idx];
+ input_dev->phys = pad->phys;
input_dev->id.bustype = BUS_PARPORT;
input_dev->id.vendor = 0x0001;
input_dev->id.product = pad_type;
@@ -659,61 +855,76 @@
} else
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- gc->pads[0] |= gc_status_bit[idx];
- gc->pads[pad_type] |= gc_status_bit[idx];
+ gc->pad_count[pad_type]++;
switch (pad_type) {
- case GC_N64:
- for (i = 0; i < 10; i++)
- set_bit(gc_n64_btn[i], input_dev->keybit);
+ case GC_N64:
+ for (i = 0; i < 10; i++)
+ __set_bit(gc_n64_btn[i], input_dev->keybit);
- for (i = 0; i < 2; i++) {
- input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
- input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
- }
+ for (i = 0; i < 2; i++) {
+ input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
+ }
- break;
+ err = gc_n64_init_ff(input_dev, idx);
+ if (err) {
+ pr_warning("Failed to initiate rumble for N64 device %d\n", idx);
+ goto err_free_dev;
+ }
- case GC_SNESMOUSE:
- set_bit(BTN_LEFT, input_dev->keybit);
- set_bit(BTN_RIGHT, input_dev->keybit);
- set_bit(REL_X, input_dev->relbit);
- set_bit(REL_Y, input_dev->relbit);
- break;
+ break;
- case GC_SNES:
- for (i = 4; i < 8; i++)
- set_bit(gc_snes_btn[i], input_dev->keybit);
- case GC_NES:
- for (i = 0; i < 4; i++)
- set_bit(gc_snes_btn[i], input_dev->keybit);
- break;
+ case GC_SNESMOUSE:
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+ __set_bit(REL_X, input_dev->relbit);
+ __set_bit(REL_Y, input_dev->relbit);
+ break;
- case GC_MULTI2:
- set_bit(BTN_THUMB, input_dev->keybit);
- case GC_MULTI:
- set_bit(BTN_TRIGGER, input_dev->keybit);
- break;
+ case GC_SNES:
+ for (i = 4; i < 8; i++)
+ __set_bit(gc_snes_btn[i], input_dev->keybit);
+ case GC_NES:
+ for (i = 0; i < 4; i++)
+ __set_bit(gc_snes_btn[i], input_dev->keybit);
+ break;
- case GC_PSX:
- for (i = 0; i < 6; i++)
- input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2);
- for (i = 0; i < 12; i++)
- set_bit(gc_psx_btn[i], input_dev->keybit);
+ case GC_MULTI2:
+ __set_bit(BTN_THUMB, input_dev->keybit);
+ case GC_MULTI:
+ __set_bit(BTN_TRIGGER, input_dev->keybit);
+ break;
- break;
+ case GC_PSX:
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev,
+ gc_psx_abs[i], 4, 252, 0, 2);
+ for (i = 0; i < 12; i++)
+ __set_bit(gc_psx_btn[i], input_dev->keybit);
- case GC_DDR:
- for (i = 0; i < 4; i++)
- set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
- for (i = 0; i < 12; i++)
- set_bit(gc_psx_btn[i], input_dev->keybit);
+ break;
- break;
+ case GC_DDR:
+ for (i = 0; i < 4; i++)
+ __set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+ for (i = 0; i < 12; i++)
+ __set_bit(gc_psx_btn[i], input_dev->keybit);
+
+ break;
}
+ err = input_register_device(pad->dev);
+ if (err)
+ goto err_free_dev;
+
return 0;
+
+err_free_dev:
+ input_free_device(pad->dev);
+ pad->dev = NULL;
+ return err;
}
static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
@@ -722,52 +933,47 @@
struct parport *pp;
struct pardevice *pd;
int i;
+ int count = 0;
int err;
pp = parport_find_number(parport);
if (!pp) {
- printk(KERN_ERR "gamecon.c: no such parport\n");
+ pr_err("no such parport %d\n", parport);
err = -EINVAL;
goto err_out;
}
pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
if (!pd) {
- printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
+ pr_err("parport busy already - lp.o loaded?\n");
err = -EBUSY;
goto err_put_pp;
}
gc = kzalloc(sizeof(struct gc), GFP_KERNEL);
if (!gc) {
- printk(KERN_ERR "gamecon.c: Not enough memory\n");
+ pr_err("Not enough memory\n");
err = -ENOMEM;
goto err_unreg_pardev;
}
mutex_init(&gc->mutex);
gc->pd = pd;
- init_timer(&gc->timer);
- gc->timer.data = (long) gc;
- gc->timer.function = gc_timer;
+ setup_timer(&gc->timer, gc_timer, (long) gc);
for (i = 0; i < n_pads && i < GC_MAX_DEVICES; i++) {
if (!pads[i])
continue;
- snprintf(gc->phys[i], sizeof(gc->phys[i]),
- "%s/input%d", gc->pd->port->name, i);
err = gc_setup_pad(gc, i, pads[i]);
if (err)
goto err_unreg_devs;
- err = input_register_device(gc->dev[i]);
- if (err)
- goto err_free_dev;
+ count++;
}
- if (!gc->pads[0]) {
- printk(KERN_ERR "gamecon.c: No valid devices specified\n");
+ if (count == 0) {
+ pr_err("No valid devices specified\n");
err = -EINVAL;
goto err_free_gc;
}
@@ -775,12 +981,10 @@
parport_put_port(pp);
return gc;
- err_free_dev:
- input_free_device(gc->dev[i]);
err_unreg_devs:
while (--i >= 0)
- if (gc->dev[i])
- input_unregister_device(gc->dev[i]);
+ if (gc->pads[i].dev)
+ input_unregister_device(gc->pads[i].dev);
err_free_gc:
kfree(gc);
err_unreg_pardev:
@@ -796,8 +1000,8 @@
int i;
for (i = 0; i < GC_MAX_DEVICES; i++)
- if (gc->dev[i])
- input_unregister_device(gc->dev[i]);
+ if (gc->pads[i].dev)
+ input_unregister_device(gc->pads[i].dev);
parport_unregister_device(gc->pd);
kfree(gc);
}
@@ -813,7 +1017,7 @@
continue;
if (gc_cfg[i].nargs < 2) {
- printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
+ pr_err("at least one device must be specified\n");
err = -EINVAL;
break;
}
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8a28fb7..9b3353b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -86,9 +86,8 @@
/* xbox d-pads should map to buttons, as is required for DDR pads
but we map them to axes when possible to simplify things */
-#define MAP_DPAD_TO_BUTTONS 0
-#define MAP_DPAD_TO_AXES 1
-#define MAP_DPAD_UNKNOWN 2
+#define MAP_DPAD_TO_BUTTONS (1 << 0)
+#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define XTYPE_XBOX 0
#define XTYPE_XBOX360 1
@@ -99,57 +98,61 @@
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
+static int triggers_to_buttons;
+module_param(triggers_to_buttons, bool, S_IRUGO);
+MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
+
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
char *name;
- u8 dpad_mapping;
+ u8 mapping;
u8 xtype;
} xpad_device[] = {
- { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
+ { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
+ { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
- { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
- { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
- { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
- { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
- { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
- { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+ { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
- { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+ { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
- { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
- { 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+ { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
- { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
- { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
- { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
+ { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
+ { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
/* buttons shared with xbox and xbox360 */
@@ -165,13 +168,20 @@
-1 /* terminating entry */
};
-/* only used if MAP_DPAD_TO_BUTTONS */
+/* used when dpad is mapped to nuttons */
static const signed short xpad_btn_pad[] = {
BTN_LEFT, BTN_RIGHT, /* d-pad left, right */
BTN_0, BTN_1, /* d-pad up, down (XXX names??) */
-1 /* terminating entry */
};
+/* used when triggers are mapped to buttons */
+static const signed short xpad_btn_triggers[] = {
+ BTN_TL2, BTN_TR2, /* triggers left/right */
+ -1
+};
+
+
static const signed short xpad360_btn[] = { /* buttons for x360 controller */
BTN_TL, BTN_TR, /* Button LB/RB */
BTN_MODE, /* The big X button */
@@ -181,16 +191,21 @@
static const signed short xpad_abs[] = {
ABS_X, ABS_Y, /* left stick */
ABS_RX, ABS_RY, /* right stick */
- ABS_Z, ABS_RZ, /* triggers left/right */
-1 /* terminating entry */
};
-/* only used if MAP_DPAD_TO_AXES */
+/* used when dpad is mapped to axes */
static const signed short xpad_abs_pad[] = {
ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */
-1 /* terminating entry */
};
+/* used when triggers are mapped to axes */
+static const signed short xpad_abs_triggers[] = {
+ ABS_Z, ABS_RZ, /* triggers left/right */
+ -1
+};
+
/* Xbox 360 has a vendor-specific class, so we cannot match it with only
* USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
@@ -246,7 +261,7 @@
char phys[64]; /* physical device path */
- int dpad_mapping; /* map d-pad to buttons or to axes */
+ int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
};
@@ -277,20 +292,25 @@
~(__s16) le16_to_cpup((__le16 *)(data + 18)));
/* triggers left/right */
- input_report_abs(dev, ABS_Z, data[10]);
- input_report_abs(dev, ABS_RZ, data[11]);
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ input_report_key(dev, BTN_TL2, data[10]);
+ input_report_key(dev, BTN_TR2, data[11]);
+ } else {
+ input_report_abs(dev, ABS_Z, data[10]);
+ input_report_abs(dev, ABS_RZ, data[11]);
+ }
/* digital pad */
- if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
- input_report_abs(dev, ABS_HAT0X,
- !!(data[2] & 0x08) - !!(data[2] & 0x04));
- input_report_abs(dev, ABS_HAT0Y,
- !!(data[2] & 0x02) - !!(data[2] & 0x01));
- } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
input_report_key(dev, BTN_LEFT, data[2] & 0x04);
input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
input_report_key(dev, BTN_0, data[2] & 0x01); /* up */
input_report_key(dev, BTN_1, data[2] & 0x02); /* down */
+ } else {
+ input_report_abs(dev, ABS_HAT0X,
+ !!(data[2] & 0x08) - !!(data[2] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y,
+ !!(data[2] & 0x02) - !!(data[2] & 0x01));
}
/* start/back buttons and stick press left/right */
@@ -328,17 +348,17 @@
struct input_dev *dev = xpad->dev;
/* digital pad */
- if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
- input_report_abs(dev, ABS_HAT0X,
- !!(data[2] & 0x08) - !!(data[2] & 0x04));
- input_report_abs(dev, ABS_HAT0Y,
- !!(data[2] & 0x02) - !!(data[2] & 0x01));
- } else if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) {
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
/* dpad as buttons (right, left, down, up) */
input_report_key(dev, BTN_LEFT, data[2] & 0x04);
input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
input_report_key(dev, BTN_0, data[2] & 0x01); /* up */
input_report_key(dev, BTN_1, data[2] & 0x02); /* down */
+ } else {
+ input_report_abs(dev, ABS_HAT0X,
+ !!(data[2] & 0x08) - !!(data[2] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y,
+ !!(data[2] & 0x02) - !!(data[2] & 0x01));
}
/* start/back buttons */
@@ -371,8 +391,13 @@
~(__s16) le16_to_cpup((__le16 *)(data + 12)));
/* triggers left/right */
- input_report_abs(dev, ABS_Z, data[4]);
- input_report_abs(dev, ABS_RZ, data[5]);
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ input_report_key(dev, BTN_TL2, data[4]);
+ input_report_key(dev, BTN_TR2, data[5]);
+ } else {
+ input_report_abs(dev, ABS_Z, data[4]);
+ input_report_abs(dev, ABS_RZ, data[5]);
+ }
input_sync(dev);
}
@@ -505,7 +530,7 @@
struct usb_endpoint_descriptor *ep_irq_out;
int error = -ENOMEM;
- if (xpad->xtype != XTYPE_XBOX360)
+ if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
return 0;
xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
@@ -535,13 +560,13 @@
static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_XBOX360)
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX)
usb_kill_urb(xpad->irq_out);
}
static void xpad_deinit_output(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_XBOX360) {
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) {
usb_free_urb(xpad->irq_out);
usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
xpad->odata, xpad->odata_dma);
@@ -554,24 +579,45 @@
#endif
#ifdef CONFIG_JOYSTICK_XPAD_FF
-static int xpad_play_effect(struct input_dev *dev, void *data,
- struct ff_effect *effect)
+static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct usb_xpad *xpad = input_get_drvdata(dev);
if (effect->type == FF_RUMBLE) {
__u16 strong = effect->u.rumble.strong_magnitude;
__u16 weak = effect->u.rumble.weak_magnitude;
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x08;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256;
- xpad->odata[4] = weak / 256;
- xpad->odata[5] = 0x00;
- xpad->odata[6] = 0x00;
- xpad->odata[7] = 0x00;
- xpad->irq_out->transfer_buffer_length = 8;
- usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+ switch (xpad->xtype) {
+
+ case XTYPE_XBOX:
+ xpad->odata[0] = 0x00;
+ xpad->odata[1] = 0x06;
+ xpad->odata[2] = 0x00;
+ xpad->odata[3] = strong / 256; /* left actuator */
+ xpad->odata[4] = 0x00;
+ xpad->odata[5] = weak / 256; /* right actuator */
+ xpad->irq_out->transfer_buffer_length = 6;
+
+ return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+ case XTYPE_XBOX360:
+ xpad->odata[0] = 0x00;
+ xpad->odata[1] = 0x08;
+ xpad->odata[2] = 0x00;
+ xpad->odata[3] = strong / 256; /* left actuator? */
+ xpad->odata[4] = weak / 256; /* right actuator? */
+ xpad->odata[5] = 0x00;
+ xpad->odata[6] = 0x00;
+ xpad->odata[7] = 0x00;
+ xpad->irq_out->transfer_buffer_length = 8;
+
+ return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+ default:
+ dbg("%s - rumble command sent to unsupported xpad type: %d",
+ __func__, xpad->xtype);
+ return -1;
+ }
}
return 0;
@@ -579,7 +625,7 @@
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_XBOX360)
+ if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -712,11 +758,11 @@
input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
break;
case ABS_Z:
- case ABS_RZ: /* the triggers */
+ case ABS_RZ: /* the triggers (if mapped to axes) */
input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
break;
case ABS_HAT0X:
- case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */
+ case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
}
@@ -752,10 +798,9 @@
goto fail2;
xpad->udev = udev;
- xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+ xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
- if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
- xpad->dpad_mapping = !dpad_to_buttons;
+
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
@@ -764,7 +809,13 @@
xpad->xtype = XTYPE_XBOX360;
} else
xpad->xtype = XTYPE_XBOX;
+
+ if (dpad_to_buttons)
+ xpad->mapping |= MAP_DPAD_TO_BUTTONS;
+ if (triggers_to_buttons)
+ xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
}
+
xpad->dev = input_dev;
usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
@@ -781,25 +832,37 @@
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- /* set up buttons */
+ /* set up standard buttons and axes */
for (i = 0; xpad_common_btn[i] >= 0; i++)
- set_bit(xpad_common_btn[i], input_dev->keybit);
- if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W))
- for (i = 0; xpad360_btn[i] >= 0; i++)
- set_bit(xpad360_btn[i], input_dev->keybit);
- else
- for (i = 0; xpad_btn[i] >= 0; i++)
- set_bit(xpad_btn[i], input_dev->keybit);
- if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- set_bit(xpad_btn_pad[i], input_dev->keybit);
+ __set_bit(xpad_common_btn[i], input_dev->keybit);
- /* set up axes */
for (i = 0; xpad_abs[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs[i]);
- if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+
+ /* Now set up model-specific ones */
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
+ for (i = 0; xpad360_btn[i] >= 0; i++)
+ __set_bit(xpad360_btn[i], input_dev->keybit);
+ } else {
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ __set_bit(xpad_btn[i], input_dev->keybit);
+ }
+
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ __set_bit(xpad_btn_pad[i], input_dev->keybit);
+ } else {
for (i = 0; xpad_abs_pad[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ }
+
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+ __set_bit(xpad_btn_triggers[i], input_dev->keybit);
+ } else {
+ for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+ }
error = xpad_init_output(intf, xpad);
if (error)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 02c836e..64c1023 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -35,10 +35,10 @@
be called adp5520-keys.
config KEYBOARD_ADP5588
- tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+ tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
depends on I2C
help
- Say Y here if you want to use a ADP5588 attached to your
+ Say Y here if you want to use a ADP5588/87 attached to your
system I2C bus.
To compile this driver as a module, choose M here: the
@@ -144,13 +144,15 @@
module will be called bf54x-keys.
config KEYBOARD_CORGI
- tristate "Corgi keyboard"
+ tristate "Corgi keyboard (deprecated)"
depends on PXA_SHARPSL
- default y
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
series of PDAs.
+ This driver is now deprecated, use generic GPIO based matrix
+ keyboard driver instead.
+
To compile this driver as a module, choose M here: the
module will be called corgikbd.
@@ -292,6 +294,15 @@
To compile this driver as a module, choose M here: the
module will be called max7359_keypad.
+config KEYBOARD_IMX
+ tristate "IMX keypad support"
+ depends on ARCH_MXC
+ help
+ Enable support for IMX keypad port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx_keypad.
+
config KEYBOARD_NEWTON
tristate "Newton keyboard"
select SERIO
@@ -329,13 +340,15 @@
module will be called pxa930_rotary.
config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
+ tristate "Spitz keyboard (deprecated)"
depends on PXA_SHARPSL
- default y
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
SL-C3000 and Sl-C3100 series of PDAs.
+ This driver is now deprecated, use generic GPIO based matrix
+ keyboard driver instead.
+
To compile this driver as a module, choose M here: the
module will be called spitzkbd.
@@ -363,7 +376,7 @@
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
- depends on SUPERH
+ depends on SUPERH || ARCH_SHMOBILE
help
Say Y here if you want to use a keypad attached to the KEYSC block
on SuperH processors such as sh7722 and sh7343.
@@ -402,12 +415,14 @@
module will be called twl4030_keypad.
config KEYBOARD_TOSA
- tristate "Tosa keyboard"
+ tristate "Tosa keyboard (deprecated)"
depends on MACH_TOSA
- default y
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+ This driver is now deprecated, use generic GPIO based matrix
+ keyboard driver instead.
+
To compile this driver as a module, choose M here: the
module will be called tosakbd.
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 78654ef..706c6b5 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -17,6 +17,7 @@
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
+obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1edb596..b5142d2 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -1,6 +1,7 @@
/*
* File: drivers/input/keyboard/adp5588_keys.c
- * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Description: keypad driver for ADP5588 and ADP5587
+ * I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2008-2009 Analog Devices Inc.
@@ -327,6 +328,7 @@
static const struct i2c_device_id adp5588_id[] = {
{ KBUILD_MODNAME, 0 },
+ { "adp5587-keys", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adp5588_id);
@@ -357,5 +359,5 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
MODULE_ALIAS("platform:adp5588-keys");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 7b40562..d358ef8 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -40,26 +40,26 @@
MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
-static int atkbd_reset;
+static bool atkbd_reset;
#else
-static int atkbd_reset = 1;
+static bool atkbd_reset = true;
#endif
module_param_named(reset, atkbd_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
-static int atkbd_softrepeat;
+static bool atkbd_softrepeat;
module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
-static int atkbd_softraw = 1;
+static bool atkbd_softraw = true;
module_param_named(softraw, atkbd_softraw, bool, 0);
MODULE_PARM_DESC(softraw, "Use software generated rawmode");
-static int atkbd_scroll;
+static bool atkbd_scroll;
module_param_named(scroll, atkbd_scroll, bool, 0);
MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
-static int atkbd_extra;
+static bool atkbd_extra;
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
@@ -153,16 +153,16 @@
#define ATKBD_RET_HANGEUL 0xf2
#define ATKBD_RET_ERR 0xff
-#define ATKBD_KEY_UNKNOWN 0
+#define ATKBD_KEY_UNKNOWN 0
#define ATKBD_KEY_NULL 255
-#define ATKBD_SCR_1 254
-#define ATKBD_SCR_2 253
-#define ATKBD_SCR_4 252
-#define ATKBD_SCR_8 251
-#define ATKBD_SCR_CLICK 250
-#define ATKBD_SCR_LEFT 249
-#define ATKBD_SCR_RIGHT 248
+#define ATKBD_SCR_1 0xfffe
+#define ATKBD_SCR_2 0xfffd
+#define ATKBD_SCR_4 0xfffc
+#define ATKBD_SCR_8 0xfffb
+#define ATKBD_SCR_CLICK 0xfffa
+#define ATKBD_SCR_LEFT 0xfff9
+#define ATKBD_SCR_RIGHT 0xfff8
#define ATKBD_SPECIAL ATKBD_SCR_RIGHT
@@ -177,7 +177,7 @@
#define ATKBD_XL_HANJA 0x20
static const struct {
- unsigned char keycode;
+ unsigned short keycode;
unsigned char set2;
} atkbd_scroll_keys[] = {
{ ATKBD_SCR_1, 0xc5 },
@@ -206,18 +206,18 @@
unsigned short keycode[ATKBD_KEYMAP_SIZE];
DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
unsigned char set;
- unsigned char translated;
- unsigned char extra;
- unsigned char write;
- unsigned char softrepeat;
- unsigned char softraw;
- unsigned char scroll;
- unsigned char enabled;
+ bool translated;
+ bool extra;
+ bool write;
+ bool softrepeat;
+ bool softraw;
+ bool scroll;
+ bool enabled;
/* Accessed only from interrupt */
unsigned char emul;
- unsigned char resend;
- unsigned char release;
+ bool resend;
+ bool release;
unsigned long xl_bit;
unsigned int last;
unsigned long time;
@@ -301,18 +301,18 @@
* Checks if we should mangle the scancode to extract 'release' bit
* in translated mode.
*/
-static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
+static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
{
int i;
if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
- return 0;
+ return false;
for (i = 0; i < ARRAY_SIZE(xl_table); i++)
if (code == xl_table[i])
return test_bit(i, &xl_bit);
- return 1;
+ return true;
}
/*
@@ -359,7 +359,7 @@
*/
static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
- unsigned int flags)
+ unsigned int flags)
{
struct atkbd *atkbd = serio_get_drvdata(serio);
struct input_dev *dev = atkbd->dev;
@@ -368,20 +368,18 @@
int value;
unsigned short keycode;
-#ifdef ATKBD_DEBUG
- printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-#endif
+ dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
#if !defined(__i386__) && !defined (__x86_64__)
if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
- printk(KERN_WARNING "atkbd.c: frame/parity error: %02x\n", flags);
+ dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
serio_write(serio, ATKBD_CMD_RESEND);
- atkbd->resend = 1;
+ atkbd->resend = true;
goto out;
}
if (!flags && data == ATKBD_RET_ACK)
- atkbd->resend = 0;
+ atkbd->resend = false;
#endif
if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
@@ -412,32 +410,32 @@
}
switch (code) {
- case ATKBD_RET_BAT:
- atkbd->enabled = 0;
- serio_reconnect(atkbd->ps2dev.serio);
- goto out;
- case ATKBD_RET_EMUL0:
- atkbd->emul = 1;
- goto out;
- case ATKBD_RET_EMUL1:
- atkbd->emul = 2;
- goto out;
- case ATKBD_RET_RELEASE:
- atkbd->release = 1;
- goto out;
- case ATKBD_RET_ACK:
- case ATKBD_RET_NAK:
- if (printk_ratelimit())
- printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
- "Some program might be trying access hardware directly.\n",
- data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
- goto out;
- case ATKBD_RET_ERR:
- atkbd->err_count++;
-#ifdef ATKBD_DEBUG
- printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
-#endif
- goto out;
+ case ATKBD_RET_BAT:
+ atkbd->enabled = false;
+ serio_reconnect(atkbd->ps2dev.serio);
+ goto out;
+ case ATKBD_RET_EMUL0:
+ atkbd->emul = 1;
+ goto out;
+ case ATKBD_RET_EMUL1:
+ atkbd->emul = 2;
+ goto out;
+ case ATKBD_RET_RELEASE:
+ atkbd->release = true;
+ goto out;
+ case ATKBD_RET_ACK:
+ case ATKBD_RET_NAK:
+ if (printk_ratelimit())
+ dev_warn(&serio->dev,
+ "Spurious %s on %s. "
+ "Some program might be trying access hardware directly.\n",
+ data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+ goto out;
+ case ATKBD_RET_ERR:
+ atkbd->err_count++;
+ dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
+ serio->phys);
+ goto out;
}
code = atkbd_compat_scancode(atkbd, code);
@@ -451,71 +449,72 @@
input_event(dev, EV_MSC, MSC_SCAN, code);
switch (keycode) {
- case ATKBD_KEY_NULL:
- break;
- case ATKBD_KEY_UNKNOWN:
- printk(KERN_WARNING
- "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
- atkbd->release ? "released" : "pressed",
- atkbd->translated ? "translated" : "raw",
- atkbd->set, code, serio->phys);
- printk(KERN_WARNING
- "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
- code & 0x80 ? "e0" : "", code & 0x7f);
- input_sync(dev);
- break;
- case ATKBD_SCR_1:
- scroll = 1 - atkbd->release * 2;
- break;
- case ATKBD_SCR_2:
- scroll = 2 - atkbd->release * 4;
- break;
- case ATKBD_SCR_4:
- scroll = 4 - atkbd->release * 8;
- break;
- case ATKBD_SCR_8:
- scroll = 8 - atkbd->release * 16;
- break;
- case ATKBD_SCR_CLICK:
- click = !atkbd->release;
- break;
- case ATKBD_SCR_LEFT:
- hscroll = -1;
- break;
- case ATKBD_SCR_RIGHT:
- hscroll = 1;
- break;
- default:
- if (atkbd->release) {
- value = 0;
- atkbd->last = 0;
- } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
- /* Workaround Toshiba laptop multiple keypress */
- value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
- } else {
- value = 1;
- atkbd->last = code;
- atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
- }
+ case ATKBD_KEY_NULL:
+ break;
+ case ATKBD_KEY_UNKNOWN:
+ dev_warn(&serio->dev,
+ "Unknown key %s (%s set %d, code %#x on %s).\n",
+ atkbd->release ? "released" : "pressed",
+ atkbd->translated ? "translated" : "raw",
+ atkbd->set, code, serio->phys);
+ dev_warn(&serio->dev,
+ "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+ code & 0x80 ? "e0" : "", code & 0x7f);
+ input_sync(dev);
+ break;
+ case ATKBD_SCR_1:
+ scroll = 1;
+ break;
+ case ATKBD_SCR_2:
+ scroll = 2;
+ break;
+ case ATKBD_SCR_4:
+ scroll = 4;
+ break;
+ case ATKBD_SCR_8:
+ scroll = 8;
+ break;
+ case ATKBD_SCR_CLICK:
+ click = !atkbd->release;
+ break;
+ case ATKBD_SCR_LEFT:
+ hscroll = -1;
+ break;
+ case ATKBD_SCR_RIGHT:
+ hscroll = 1;
+ break;
+ default:
+ if (atkbd->release) {
+ value = 0;
+ atkbd->last = 0;
+ } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+ /* Workaround Toshiba laptop multiple keypress */
+ value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+ } else {
+ value = 1;
+ atkbd->last = code;
+ atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
+ }
- input_event(dev, EV_KEY, keycode, value);
- input_sync(dev);
+ input_event(dev, EV_KEY, keycode, value);
+ input_sync(dev);
- if (value && test_bit(code, atkbd->force_release_mask)) {
- input_report_key(dev, keycode, 0);
- input_sync(dev);
- }
+ if (value && test_bit(code, atkbd->force_release_mask)) {
+ input_report_key(dev, keycode, 0);
+ input_sync(dev);
+ }
}
if (atkbd->scroll) {
if (click != -1)
input_report_key(dev, BTN_MIDDLE, click);
- input_report_rel(dev, REL_WHEEL, scroll);
+ input_report_rel(dev, REL_WHEEL,
+ atkbd->release ? -scroll : scroll);
input_report_rel(dev, REL_HWHEEL, hscroll);
input_sync(dev);
}
- atkbd->release = 0;
+ atkbd->release = false;
out:
return IRQ_HANDLED;
}
@@ -634,17 +633,18 @@
switch (type) {
- case EV_LED:
- atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
- return 0;
+ case EV_LED:
+ atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
+ return 0;
- case EV_REP:
- if (!atkbd->softrepeat)
- atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
- return 0;
+ case EV_REP:
+ if (!atkbd->softrepeat)
+ atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
+ return 0;
+
+ default:
+ return -1;
}
-
- return -1;
}
/*
@@ -655,7 +655,7 @@
static inline void atkbd_enable(struct atkbd *atkbd)
{
serio_pause_rx(atkbd->ps2dev.serio);
- atkbd->enabled = 1;
+ atkbd->enabled = true;
serio_continue_rx(atkbd->ps2dev.serio);
}
@@ -667,7 +667,7 @@
static inline void atkbd_disable(struct atkbd *atkbd)
{
serio_pause_rx(atkbd->ps2dev.serio);
- atkbd->enabled = 0;
+ atkbd->enabled = false;
serio_continue_rx(atkbd->ps2dev.serio);
}
@@ -688,7 +688,9 @@
if (atkbd_reset)
if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
- printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", ps2dev->serio->phys);
+ dev_warn(&ps2dev->serio->dev,
+ "keyboard reset failed on %s\n",
+ ps2dev->serio->phys);
/*
* Then we check the keyboard ID. We should get 0xab83 under normal conditions.
@@ -718,8 +720,9 @@
atkbd->id = (param[0] << 8) | param[1];
if (atkbd->id == 0xaca1 && atkbd->translated) {
- printk(KERN_ERR "atkbd.c: NCD terminal keyboards are only supported on non-translating\n");
- printk(KERN_ERR "atkbd.c: controllers. Use i8042.direct=1 to disable translation.\n");
+ dev_err(&ps2dev->serio->dev,
+ "NCD terminal keyboards are only supported on non-translating controlelrs. "
+ "Use i8042.direct=1 to disable translation.\n");
return -1;
}
@@ -737,7 +740,7 @@
struct ps2dev *ps2dev = &atkbd->ps2dev;
unsigned char param[2];
- atkbd->extra = 0;
+ atkbd->extra = false;
/*
* For known special keyboards we can go ahead and set the correct set.
* We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
@@ -756,7 +759,7 @@
if (allow_extra) {
param[0] = 0x71;
if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
- atkbd->extra = 1;
+ atkbd->extra = true;
return 2;
}
}
@@ -821,7 +824,8 @@
*/
if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
- printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
+ dev_err(&ps2dev->serio->dev,
+ "Failed to enable keyboard on %s\n",
ps2dev->serio->phys);
return -1;
}
@@ -1070,9 +1074,13 @@
input_dev->keycodesize = sizeof(unsigned short);
input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
- for (i = 0; i < ATKBD_KEYMAP_SIZE; i++)
- if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+ for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
+ if (atkbd->keycode[i] != KEY_RESERVED &&
+ atkbd->keycode[i] != ATKBD_KEY_NULL &&
+ atkbd->keycode[i] < ATKBD_SPECIAL) {
__set_bit(atkbd->keycode[i], input_dev->keybit);
+ }
+ }
}
/*
@@ -1100,12 +1108,14 @@
switch (serio->id.type) {
- case SERIO_8042_XL:
- atkbd->translated = 1;
- case SERIO_8042:
- if (serio->write)
- atkbd->write = 1;
- break;
+ case SERIO_8042_XL:
+ atkbd->translated = true;
+ /* Fall through */
+
+ case SERIO_8042:
+ if (serio->write)
+ atkbd->write = true;
+ break;
}
atkbd->softraw = atkbd_softraw;
@@ -1113,7 +1123,7 @@
atkbd->scroll = atkbd_scroll;
if (atkbd->softrepeat)
- atkbd->softraw = 1;
+ atkbd->softraw = true;
serio_set_drvdata(serio, atkbd);
@@ -1172,7 +1182,8 @@
int retval = -1;
if (!atkbd || !drv) {
- printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+ dev_dbg(&serio->dev,
+ "reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
@@ -1286,7 +1297,8 @@
struct input_dev *old_dev, *new_dev;
unsigned long value;
int err;
- unsigned char old_extra, old_set;
+ bool old_extra;
+ unsigned char old_set;
if (!atkbd->write)
return -EIO;
@@ -1369,7 +1381,7 @@
struct input_dev *old_dev, *new_dev;
unsigned long value;
int err;
- unsigned char old_scroll;
+ bool old_scroll;
if (strict_strtoul(buf, 10, &value) || value > 1)
return -EINVAL;
@@ -1413,7 +1425,8 @@
struct input_dev *old_dev, *new_dev;
unsigned long value;
int err;
- unsigned char old_set, old_extra;
+ unsigned char old_set;
+ bool old_extra;
if (!atkbd->write)
return -EIO;
@@ -1463,7 +1476,7 @@
struct input_dev *old_dev, *new_dev;
unsigned long value;
int err;
- unsigned char old_softrepeat, old_softraw;
+ bool old_softrepeat, old_softraw;
if (!atkbd->write)
return -EIO;
@@ -1483,7 +1496,7 @@
atkbd->dev = new_dev;
atkbd->softrepeat = value;
if (atkbd->softrepeat)
- atkbd->softraw = 1;
+ atkbd->softraw = true;
atkbd_set_device_attrs(atkbd);
err = input_register_device(atkbd->dev);
@@ -1513,7 +1526,7 @@
struct input_dev *old_dev, *new_dev;
unsigned long value;
int err;
- unsigned char old_softraw;
+ bool old_softraw;
if (strict_strtoul(buf, 10, &value) || value > 1)
return -EINVAL;
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index e457404..bd25a3a 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -69,7 +69,7 @@
void __iomem *mmio_base;
- unsigned int matrix_keycodes[EP93XX_MATRIX_SIZE];
+ unsigned short keycodes[EP93XX_MATRIX_SIZE];
int key1;
int key2;
@@ -79,24 +79,6 @@
bool enabled;
};
-static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
-{
- struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
- struct input_dev *input_dev = keypad->input_dev;
- unsigned int *key;
- int i;
-
- key = &pdata->matrix_key_map[0];
- for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
- int row = KEY_ROW(*key);
- int col = KEY_COL(*key);
- int code = KEY_VAL(*key);
-
- keypad->matrix_keycodes[(row << 3) + col] = code;
- __set_bit(code, input_dev->keybit);
- }
-}
-
static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
{
struct ep93xx_keypad *keypad = dev_id;
@@ -107,10 +89,10 @@
status = __raw_readl(keypad->mmio_base + KEY_REG);
keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
- key1 = keypad->matrix_keycodes[keycode];
+ key1 = keypad->keycodes[keycode];
keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
- key2 = keypad->matrix_keycodes[keycode];
+ key2 = keypad->keycodes[keycode];
if (status & KEY_REG_2KEYS) {
if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
@@ -256,6 +238,7 @@
static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
{
struct ep93xx_keypad *keypad;
+ const struct matrix_keymap_data *keymap_data;
struct input_dev *input_dev;
struct resource *res;
int err;
@@ -270,6 +253,12 @@
goto failed_free;
}
+ keymap_data = keypad->pdata->keymap_data;
+ if (!keymap_data) {
+ err = -EINVAL;
+ goto failed_free;
+ }
+
keypad->irq = platform_get_irq(pdev, 0);
if (!keypad->irq) {
err = -ENXIO;
@@ -317,9 +306,9 @@
input_dev->open = ep93xx_keypad_open;
input_dev->close = ep93xx_keypad_close;
input_dev->dev.parent = &pdev->dev;
- input_dev->keycode = keypad->matrix_keycodes;
- input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]);
- input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes);
+ input_dev->keycode = keypad->keycodes;
+ input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
input_set_drvdata(input_dev, keypad);
@@ -327,7 +316,8 @@
if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
input_dev->evbit[0] |= BIT_MASK(EV_REP);
- ep93xx_keypad_build_keycode(keypad);
+ matrix_keypad_build_keymap(keymap_data, 3,
+ input_dev->keycode, input_dev->keybit);
platform_set_drvdata(pdev, keypad);
err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 1aff3b7..2b708aa 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -30,13 +30,289 @@
struct input_dev *input;
struct timer_list timer;
struct work_struct work;
+ bool disabled;
};
struct gpio_keys_drvdata {
struct input_dev *input;
+ struct mutex disable_lock;
+ unsigned int n_buttons;
struct gpio_button_data data[0];
};
+/*
+ * SYSFS interface for enabling/disabling keys and switches:
+ *
+ * There are 4 attributes under /sys/devices/platform/gpio-keys/
+ * keys [ro] - bitmap of keys (EV_KEY) which can be
+ * disabled
+ * switches [ro] - bitmap of switches (EV_SW) which can be
+ * disabled
+ * disabled_keys [rw] - bitmap of keys currently disabled
+ * disabled_switches [rw] - bitmap of switches currently disabled
+ *
+ * Userland can change these values and hence disable event generation
+ * for each key (or switch). Disabling a key means its interrupt line
+ * is disabled.
+ *
+ * For example, if we have following switches set up as gpio-keys:
+ * SW_DOCK = 5
+ * SW_CAMERA_LENS_COVER = 9
+ * SW_KEYPAD_SLIDE = 10
+ * SW_FRONT_PROXIMITY = 11
+ * This is read from switches:
+ * 11-9,5
+ * Next we want to disable proximity (11) and dock (5), we write:
+ * 11,5
+ * to file disabled_switches. Now proximity and dock IRQs are disabled.
+ * This can be verified by reading the file disabled_switches:
+ * 11,5
+ * If we now want to enable proximity (11) switch we write:
+ * 5
+ * to disabled_switches.
+ *
+ * We can disable only those keys which don't allow sharing the irq.
+ */
+
+/**
+ * get_n_events_by_type() - returns maximum number of events per @type
+ * @type: type of button (%EV_KEY, %EV_SW)
+ *
+ * Return value of this function can be used to allocate bitmap
+ * large enough to hold all bits for given type.
+ */
+static inline int get_n_events_by_type(int type)
+{
+ BUG_ON(type != EV_SW && type != EV_KEY);
+
+ return (type == EV_KEY) ? KEY_CNT : SW_CNT;
+}
+
+/**
+ * gpio_keys_disable_button() - disables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Disables button pointed by @bdata. This is done by masking
+ * IRQ line. After this function is called, button won't generate
+ * input events anymore. Note that one can only disable buttons
+ * that don't share IRQs.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races when concurrent threads are
+ * disabling buttons at the same time.
+ */
+static void gpio_keys_disable_button(struct gpio_button_data *bdata)
+{
+ if (!bdata->disabled) {
+ /*
+ * Disable IRQ and possible debouncing timer.
+ */
+ disable_irq(gpio_to_irq(bdata->button->gpio));
+ if (bdata->button->debounce_interval)
+ del_timer_sync(&bdata->timer);
+
+ bdata->disabled = true;
+ }
+}
+
+/**
+ * gpio_keys_enable_button() - enables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Enables given button pointed by @bdata.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races with concurrent threads trying
+ * to enable the same button at the same time.
+ */
+static void gpio_keys_enable_button(struct gpio_button_data *bdata)
+{
+ if (bdata->disabled) {
+ enable_irq(gpio_to_irq(bdata->button->gpio));
+ bdata->disabled = false;
+ }
+}
+
+/**
+ * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons
+ * @ddata: pointer to drvdata
+ * @buf: buffer where stringified bitmap is written
+ * @type: button type (%EV_KEY, %EV_SW)
+ * @only_disabled: does caller want only those buttons that are
+ * currently disabled or all buttons that can be
+ * disabled
+ *
+ * This function writes buttons that can be disabled to @buf. If
+ * @only_disabled is true, then @buf contains only those buttons
+ * that are currently disabled. Returns 0 on success or negative
+ * errno on failure.
+ */
+static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
+ char *buf, unsigned int type,
+ bool only_disabled)
+{
+ int n_events = get_n_events_by_type(type);
+ unsigned long *bits;
+ ssize_t ret;
+ int i;
+
+ bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);
+ if (!bits)
+ return -ENOMEM;
+
+ for (i = 0; i < ddata->n_buttons; i++) {
+ struct gpio_button_data *bdata = &ddata->data[i];
+
+ if (bdata->button->type != type)
+ continue;
+
+ if (only_disabled && !bdata->disabled)
+ continue;
+
+ __set_bit(bdata->button->code, bits);
+ }
+
+ ret = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, bits, n_events);
+ buf[ret++] = '\n';
+ buf[ret] = '\0';
+
+ kfree(bits);
+
+ return ret;
+}
+
+/**
+ * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap
+ * @ddata: pointer to drvdata
+ * @buf: buffer from userspace that contains stringified bitmap
+ * @type: button type (%EV_KEY, %EV_SW)
+ *
+ * This function parses stringified bitmap from @buf and disables/enables
+ * GPIO buttons accordinly. Returns 0 on success and negative error
+ * on failure.
+ */
+static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
+ const char *buf, unsigned int type)
+{
+ int n_events = get_n_events_by_type(type);
+ unsigned long *bits;
+ ssize_t error;
+ int i;
+
+ bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);
+ if (!bits)
+ return -ENOMEM;
+
+ error = bitmap_parselist(buf, bits, n_events);
+ if (error)
+ goto out;
+
+ /* First validate */
+ for (i = 0; i < ddata->n_buttons; i++) {
+ struct gpio_button_data *bdata = &ddata->data[i];
+
+ if (bdata->button->type != type)
+ continue;
+
+ if (test_bit(bdata->button->code, bits) &&
+ !bdata->button->can_disable) {
+ error = -EINVAL;
+ goto out;
+ }
+ }
+
+ mutex_lock(&ddata->disable_lock);
+
+ for (i = 0; i < ddata->n_buttons; i++) {
+ struct gpio_button_data *bdata = &ddata->data[i];
+
+ if (bdata->button->type != type)
+ continue;
+
+ if (test_bit(bdata->button->code, bits))
+ gpio_keys_disable_button(bdata);
+ else
+ gpio_keys_enable_button(bdata);
+ }
+
+ mutex_unlock(&ddata->disable_lock);
+
+out:
+ kfree(bits);
+ return error;
+}
+
+#define ATTR_SHOW_FN(name, type, only_disabled) \
+static ssize_t gpio_keys_show_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct platform_device *pdev = to_platform_device(dev); \
+ struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \
+ \
+ return gpio_keys_attr_show_helper(ddata, buf, \
+ type, only_disabled); \
+}
+
+ATTR_SHOW_FN(keys, EV_KEY, false);
+ATTR_SHOW_FN(switches, EV_SW, false);
+ATTR_SHOW_FN(disabled_keys, EV_KEY, true);
+ATTR_SHOW_FN(disabled_switches, EV_SW, true);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/keys [ro]
+ * /sys/devices/platform/gpio-keys/switches [ro]
+ */
+static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL);
+static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL);
+
+#define ATTR_STORE_FN(name, type) \
+static ssize_t gpio_keys_store_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, \
+ size_t count) \
+{ \
+ struct platform_device *pdev = to_platform_device(dev); \
+ struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); \
+ ssize_t error; \
+ \
+ error = gpio_keys_attr_store_helper(ddata, buf, type); \
+ if (error) \
+ return error; \
+ \
+ return count; \
+}
+
+ATTR_STORE_FN(disabled_keys, EV_KEY);
+ATTR_STORE_FN(disabled_switches, EV_SW);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/disabled_keys [rw]
+ * /sys/devices/platform/gpio-keys/disables_switches [rw]
+ */
+static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO,
+ gpio_keys_show_disabled_keys,
+ gpio_keys_store_disabled_keys);
+static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO,
+ gpio_keys_show_disabled_switches,
+ gpio_keys_store_disabled_switches);
+
+static struct attribute *gpio_keys_attrs[] = {
+ &dev_attr_keys.attr,
+ &dev_attr_switches.attr,
+ &dev_attr_disabled_keys.attr,
+ &dev_attr_disabled_switches.attr,
+ NULL,
+};
+
+static struct attribute_group gpio_keys_attr_group = {
+ .attrs = gpio_keys_attrs,
+};
+
static void gpio_keys_report_event(struct gpio_button_data *bdata)
{
struct gpio_keys_button *button = bdata->button;
@@ -79,11 +355,13 @@
return IRQ_HANDLED;
}
-static int __devinit gpio_keys_setup_key(struct device *dev,
+static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
struct gpio_button_data *bdata,
struct gpio_keys_button *button)
{
char *desc = button->desc ? button->desc : "gpio_keys";
+ struct device *dev = &pdev->dev;
+ unsigned long irqflags;
int irq, error;
setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata);
@@ -112,10 +390,15 @@
goto fail3;
}
- error = request_irq(irq, gpio_keys_isr,
- IRQF_SHARED |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- desc, bdata);
+ irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+ /*
+ * If platform has specified that the button can be disabled,
+ * we don't want it to share the interrupt line.
+ */
+ if (!button->can_disable)
+ irqflags |= IRQF_SHARED;
+
+ error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
if (error) {
dev_err(dev, "Unable to claim irq %d; error %d\n",
irq, error);
@@ -149,6 +432,10 @@
goto fail1;
}
+ ddata->input = input;
+ ddata->n_buttons = pdata->nbuttons;
+ mutex_init(&ddata->disable_lock);
+
platform_set_drvdata(pdev, ddata);
input->name = pdev->name;
@@ -164,8 +451,6 @@
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
- ddata->input = input;
-
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
@@ -174,7 +459,7 @@
bdata->input = input;
bdata->button = button;
- error = gpio_keys_setup_key(dev, bdata, button);
+ error = gpio_keys_setup_key(pdev, bdata, button);
if (error)
goto fail2;
@@ -184,11 +469,18 @@
input_set_capability(input, type, button->code);
}
+ error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
+ if (error) {
+ dev_err(dev, "Unable to export keys/switches, error: %d\n",
+ error);
+ goto fail2;
+ }
+
error = input_register_device(input);
if (error) {
- dev_err(dev, "Unable to register input device, "
- "error: %d\n", error);
- goto fail2;
+ dev_err(dev, "Unable to register input device, error: %d\n",
+ error);
+ goto fail3;
}
/* get current state of buttons */
@@ -200,6 +492,8 @@
return 0;
+ fail3:
+ sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
fail2:
while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
@@ -224,6 +518,8 @@
struct input_dev *input = ddata->input;
int i;
+ sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
+
device_init_wakeup(&pdev->dev, 0);
for (i = 0; i < pdata->nbuttons; i++) {
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
new file mode 100644
index 0000000..2ee5b79
--- /dev/null
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -0,0 +1,594 @@
+/*
+ * Driver for the IMX keypad port.
+ * Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * <<Power management needs to be implemented>>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+/*
+ * Keypad Controller registers (halfword)
+ */
+#define KPCR 0x00 /* Keypad Control Register */
+
+#define KPSR 0x02 /* Keypad Status Register */
+#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
+#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
+#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
+#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/
+#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */
+#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */
+#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */
+
+#define KDDR 0x04 /* Keypad Data Direction Register */
+#define KPDR 0x06 /* Keypad Data Register */
+
+#define MAX_MATRIX_KEY_ROWS 8
+#define MAX_MATRIX_KEY_COLS 8
+#define MATRIX_ROW_SHIFT 3
+
+#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct imx_keypad {
+
+ struct clk *clk;
+ struct input_dev *input_dev;
+ void __iomem *mmio_base;
+
+ int irq;
+ struct timer_list check_matrix_timer;
+
+ /*
+ * The matrix is stable only if no changes are detected after
+ * IMX_KEYPAD_SCANS_FOR_STABILITY scans
+ */
+#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
+ int stable_count;
+
+ bool enabled;
+
+ /* Masks for enabled rows/cols */
+ unsigned short rows_en_mask;
+ unsigned short cols_en_mask;
+
+ unsigned short keycodes[MAX_MATRIX_KEY_NUM];
+
+ /*
+ * Matrix states:
+ * -stable: achieved after a complete debounce process.
+ * -unstable: used in the debouncing process.
+ */
+ unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS];
+ unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS];
+};
+
+/* Scan the matrix and return the new state in *matrix_volatile_state. */
+static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
+ unsigned short *matrix_volatile_state)
+{
+ int col;
+ unsigned short reg_val;
+
+ for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+ if ((keypad->cols_en_mask & (1 << col)) == 0)
+ continue;
+ /*
+ * Discharge keypad capacitance:
+ * 2. write 1s on column data.
+ * 3. configure columns as totem-pole to discharge capacitance.
+ * 4. configure columns as open-drain.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val |= 0xff00;
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ udelay(2);
+
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val |= (keypad->cols_en_mask & 0xff) << 8;
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ /*
+ * 5. Write a single column to 0, others to 1.
+ * 6. Sample row inputs and save data.
+ * 7. Repeat steps 2 - 6 for remaining columns.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= ~(1 << (8 + col));
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ /*
+ * Delay added to avoid propagating the 0 from column to row
+ * when scanning.
+ */
+ udelay(5);
+
+ /*
+ * 1s in matrix_volatile_state[col] means key pressures
+ * throw data from non enabled rows.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
+ }
+
+ /*
+ * Return in standby mode:
+ * 9. write 0s to columns
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= 0x00ff;
+ writew(reg_val, keypad->mmio_base + KPDR);
+}
+
+/*
+ * Compare the new matrix state (volatile) with the stable one stored in
+ * keypad->matrix_stable_state and fire events if changes are detected.
+ */
+static void imx_keypad_fire_events(struct imx_keypad *keypad,
+ unsigned short *matrix_volatile_state)
+{
+ struct input_dev *input_dev = keypad->input_dev;
+ int row, col;
+
+ for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+ unsigned short bits_changed;
+ int code;
+
+ if ((keypad->cols_en_mask & (1 << col)) == 0)
+ continue; /* Column is not enabled */
+
+ bits_changed = keypad->matrix_stable_state[col] ^
+ matrix_volatile_state[col];
+
+ if (bits_changed == 0)
+ continue; /* Column does not contain changes */
+
+ for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+ if ((keypad->rows_en_mask & (1 << row)) == 0)
+ continue; /* Row is not enabled */
+ if ((bits_changed & (1 << row)) == 0)
+ continue; /* Row does not contain changes */
+
+ code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev, keypad->keycodes[code],
+ matrix_volatile_state[col] & (1 << row));
+ dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
+ keypad->keycodes[code],
+ matrix_volatile_state[col] & (1 << row));
+ }
+ }
+ input_sync(input_dev);
+}
+
+/*
+ * imx_keypad_check_for_events is the timer handler.
+ */
+static void imx_keypad_check_for_events(unsigned long data)
+{
+ struct imx_keypad *keypad = (struct imx_keypad *) data;
+ unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
+ unsigned short reg_val;
+ bool state_changed, is_zero_matrix;
+ int i;
+
+ memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
+
+ imx_keypad_scan_matrix(keypad, matrix_volatile_state);
+
+ state_changed = false;
+ for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+ if ((keypad->cols_en_mask & (1 << i)) == 0)
+ continue;
+
+ if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
+ state_changed = true;
+ break;
+ }
+ }
+
+ /*
+ * If the matrix state is changed from the previous scan
+ * (Re)Begin the debouncing process, saving the new state in
+ * keypad->matrix_unstable_state.
+ * else
+ * Increase the count of number of scans with a stable state.
+ */
+ if (state_changed) {
+ memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
+ sizeof(matrix_volatile_state));
+ keypad->stable_count = 0;
+ } else
+ keypad->stable_count++;
+
+ /*
+ * If the matrix is not as stable as we want reschedule scan
+ * in the near future.
+ */
+ if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
+ mod_timer(&keypad->check_matrix_timer,
+ jiffies + msecs_to_jiffies(10));
+ return;
+ }
+
+ /*
+ * If the matrix state is stable, fire the events and save the new
+ * stable state. Note, if the matrix is kept stable for longer
+ * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
+ * events have already been generated.
+ */
+ if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
+ imx_keypad_fire_events(keypad, matrix_volatile_state);
+
+ memcpy(keypad->matrix_stable_state, matrix_volatile_state,
+ sizeof(matrix_volatile_state));
+ }
+
+ is_zero_matrix = true;
+ for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+ if (matrix_volatile_state[i] != 0) {
+ is_zero_matrix = false;
+ break;
+ }
+ }
+
+
+ if (is_zero_matrix) {
+ /*
+ * All keys have been released. Enable only the KDI
+ * interrupt for future key presses (clear the KDI
+ * status bit and its sync chain before that).
+ */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KDIE;
+ reg_val &= ~KBD_STAT_KRIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+ } else {
+ /*
+ * Some keys are still pressed. Schedule a rescan in
+ * attempt to detect multiple key presses and enable
+ * the KRI interrupt to react quickly to key release
+ * event.
+ */
+ mod_timer(&keypad->check_matrix_timer,
+ jiffies + msecs_to_jiffies(60));
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KRIE;
+ reg_val &= ~KBD_STAT_KDIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+ }
+}
+
+static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id)
+{
+ struct imx_keypad *keypad = dev_id;
+ unsigned short reg_val;
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+
+ /* Disable both interrupt types */
+ reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+ /* Clear interrupts status bits */
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ if (keypad->enabled) {
+ /* The matrix is supposed to be changed */
+ keypad->stable_count = 0;
+
+ /* Schedule the scanning procedure near in the future */
+ mod_timer(&keypad->check_matrix_timer,
+ jiffies + msecs_to_jiffies(2));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void imx_keypad_config(struct imx_keypad *keypad)
+{
+ unsigned short reg_val;
+
+ /*
+ * Include enabled rows in interrupt generation (KPCR[7:0])
+ * Configure keypad columns as open-drain (KPCR[15:8])
+ */
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val |= keypad->rows_en_mask & 0xff; /* rows */
+ reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ /* Write 0's to KPDR[15:8] (Colums) */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= 0x00ff;
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ /* Configure columns as output, rows as input (KDDR[15:0]) */
+ writew(0xff00, keypad->mmio_base + KDDR);
+
+ /*
+ * Clear Key Depress and Key Release status bit.
+ * Clear both synchronizer chain.
+ */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
+ KBD_STAT_KDSC | KBD_STAT_KRSS;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ /* Enable KDI and disable KRI (avoid false release events). */
+ reg_val |= KBD_STAT_KDIE;
+ reg_val &= ~KBD_STAT_KRIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+}
+
+static void imx_keypad_inhibit(struct imx_keypad *keypad)
+{
+ unsigned short reg_val;
+
+ /* Inhibit KDI and KRI interrupts. */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ /* Colums as open drain and disable all rows */
+ writew(0xff00, keypad->mmio_base + KPCR);
+}
+
+static void imx_keypad_close(struct input_dev *dev)
+{
+ struct imx_keypad *keypad = input_get_drvdata(dev);
+
+ dev_dbg(&dev->dev, ">%s\n", __func__);
+
+ /* Mark keypad as being inactive */
+ keypad->enabled = false;
+ synchronize_irq(keypad->irq);
+ del_timer_sync(&keypad->check_matrix_timer);
+
+ imx_keypad_inhibit(keypad);
+
+ /* Disable clock unit */
+ clk_disable(keypad->clk);
+}
+
+static int imx_keypad_open(struct input_dev *dev)
+{
+ struct imx_keypad *keypad = input_get_drvdata(dev);
+
+ dev_dbg(&dev->dev, ">%s\n", __func__);
+
+ /* We became active from now */
+ keypad->enabled = true;
+
+ /* Enable the kpp clock */
+ clk_enable(keypad->clk);
+ imx_keypad_config(keypad);
+
+ /* Sanity control, not all the rows must be actived now. */
+ if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
+ dev_err(&dev->dev,
+ "too many keys pressed, control pins initialisation\n");
+ goto open_err;
+ }
+
+ return 0;
+
+open_err:
+ imx_keypad_close(dev);
+ return -EIO;
+}
+
+static int __devinit imx_keypad_probe(struct platform_device *pdev)
+{
+ const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
+ struct imx_keypad *keypad;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int irq, error, i;
+
+ if (keymap_data == NULL) {
+ dev_err(&pdev->dev, "no keymap defined\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq defined in platform data\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no I/O memory defined in platform data\n");
+ return -EINVAL;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ return -EBUSY;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "failed to allocate the input device\n");
+ error = -ENOMEM;
+ goto failed_rel_mem;
+ }
+
+ keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL);
+ if (!keypad) {
+ dev_err(&pdev->dev, "not enough memory for driver data\n");
+ error = -ENOMEM;
+ goto failed_free_input;
+ }
+
+ keypad->input_dev = input_dev;
+ keypad->irq = irq;
+ keypad->stable_count = 0;
+
+ setup_timer(&keypad->check_matrix_timer,
+ imx_keypad_check_for_events, (unsigned long) keypad);
+
+ keypad->mmio_base = ioremap(res->start, resource_size(res));
+ if (keypad->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENOMEM;
+ goto failed_free_priv;
+ }
+
+ keypad->clk = clk_get(&pdev->dev, "kpp");
+ if (IS_ERR(keypad->clk)) {
+ dev_err(&pdev->dev, "failed to get keypad clock\n");
+ error = PTR_ERR(keypad->clk);
+ goto failed_unmap;
+ }
+
+ /* Search for rows and cols enabled */
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
+ keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
+ }
+
+ if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
+ keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+ dev_err(&pdev->dev,
+ "invalid key data (too many rows or colums)\n");
+ error = -EINVAL;
+ goto failed_clock_put;
+ }
+ dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
+ dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
+
+ /* Init the Input device */
+ input_dev->name = pdev->name;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = imx_keypad_open;
+ input_dev->close = imx_keypad_close;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->keycode = keypad->keycodes;
+ input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+ matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
+ keypad->keycodes, input_dev->keybit);
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ /* Ensure that the keypad will stay dormant until opened */
+ imx_keypad_inhibit(keypad);
+
+ error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED,
+ pdev->name, keypad);
+ if (error) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto failed_clock_put;
+ }
+
+ /* Register the input device */
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ goto failed_free_irq;
+ }
+
+ platform_set_drvdata(pdev, keypad);
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+
+failed_free_irq:
+ free_irq(irq, pdev);
+failed_clock_put:
+ clk_put(keypad->clk);
+failed_unmap:
+ iounmap(keypad->mmio_base);
+failed_free_priv:
+ kfree(keypad);
+failed_free_input:
+ input_free_device(input_dev);
+failed_rel_mem:
+ release_mem_region(res->start, resource_size(res));
+ return error;
+}
+
+static int __devexit imx_keypad_remove(struct platform_device *pdev)
+{
+ struct imx_keypad *keypad = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ dev_dbg(&pdev->dev, ">%s\n", __func__);
+
+ platform_set_drvdata(pdev, NULL);
+
+ input_unregister_device(keypad->input_dev);
+
+ free_irq(keypad->irq, keypad);
+ clk_put(keypad->clk);
+
+ iounmap(keypad->mmio_base);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver imx_keypad_driver = {
+ .driver = {
+ .name = "imx-keypad",
+ .owner = THIS_MODULE,
+ },
+ .probe = imx_keypad_probe,
+ .remove = __devexit_p(imx_keypad_remove),
+};
+
+static int __init imx_keypad_init(void)
+{
+ return platform_driver_register(&imx_keypad_driver);
+}
+
+static void __exit imx_keypad_exit(void)
+{
+ platform_driver_unregister(&imx_keypad_driver);
+}
+
+module_init(imx_keypad_init);
+module_exit(imx_keypad_exit);
+
+MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
+MODULE_DESCRIPTION("IMX Keypad Port Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-keypad");
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 191cc51..31f3008 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -362,7 +362,7 @@
return 0;
}
-static struct i2c_device_id qt2160_idtable[] = {
+static const struct i2c_device_id qt2160_idtable[] = {
{ "qt2160", 0, },
{ }
};
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 8e9380b..854e203 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -19,101 +19,141 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/bitmap.h>
#include <linux/clk.h>
#include <linux/io.h>
-#define KYCR1_OFFS 0x00
-#define KYCR2_OFFS 0x04
-#define KYINDR_OFFS 0x08
-#define KYOUTDR_OFFS 0x0c
-
-#define KYCR2_IRQ_LEVEL 0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
static const struct {
unsigned char kymd, keyout, keyin;
} sh_keysc_mode[] = {
[SH_KEYSC_MODE_1] = { 0, 6, 5 },
[SH_KEYSC_MODE_2] = { 1, 5, 6 },
[SH_KEYSC_MODE_3] = { 2, 4, 7 },
+ [SH_KEYSC_MODE_4] = { 3, 6, 6 },
+ [SH_KEYSC_MODE_5] = { 4, 6, 7 },
+ [SH_KEYSC_MODE_6] = { 5, 7, 7 },
};
struct sh_keysc_priv {
void __iomem *iomem_base;
struct clk *clk;
- unsigned long last_keys;
+ DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
struct input_dev *input;
struct sh_keysc_info pdata;
};
+#define KYCR1 0
+#define KYCR2 1
+#define KYINDR 2
+#define KYOUTDR 3
+
+#define KYCR2_IRQ_LEVEL 0x10
+#define KYCR2_IRQ_DISABLED 0x00
+
+static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
+{
+ return ioread16(p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
+ unsigned long value)
+{
+ iowrite16(value, p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_level_mode(struct sh_keysc_priv *p,
+ unsigned long keys_set)
+{
+ struct sh_keysc_info *pdata = &p->pdata;
+
+ sh_keysc_write(p, KYOUTDR, 0);
+ sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
+
+ if (pdata->kycr2_delay)
+ udelay(pdata->kycr2_delay);
+}
+
+static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
+ const char *str)
+{
+ int k;
+
+ for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
+ dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
+}
+
static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
struct sh_keysc_info *pdata = &priv->pdata;
- unsigned long keys, keys1, keys0, mask;
+ int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
+ int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
+ DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
+ DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
+ DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
unsigned char keyin_set, tmp;
- int i, k;
+ int i, k, n;
dev_dbg(&pdev->dev, "isr!\n");
- keys1 = ~0;
- keys0 = 0;
+ bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
+ bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
do {
- keys = 0;
+ bitmap_zero(keys, SH_KEYSC_MAXKEYS);
keyin_set = 0;
- iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+ sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
- for (i = 0; i < sh_keysc_mode[pdata->mode].keyout; i++) {
- iowrite16(0xfff ^ (3 << (i * 2)),
- priv->iomem_base + KYOUTDR_OFFS);
+ for (i = 0; i < keyout_nr; i++) {
+ n = keyin_nr * i;
+
+ /* drive one KEYOUT pin low, read KEYIN pins */
+ sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
udelay(pdata->delay);
- tmp = ioread16(priv->iomem_base + KYINDR_OFFS);
- keys |= tmp << (sh_keysc_mode[pdata->mode].keyin * i);
- tmp ^= (1 << sh_keysc_mode[pdata->mode].keyin) - 1;
- keyin_set |= tmp;
+ tmp = sh_keysc_read(priv, KYINDR);
+
+ /* set bit if key press has been detected */
+ for (k = 0; k < keyin_nr; k++) {
+ if (tmp & (1 << k))
+ __set_bit(n + k, keys);
+ }
+
+ /* keep track of which KEYIN bits that have been set */
+ keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
}
- iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
- iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
- priv->iomem_base + KYCR2_OFFS);
+ sh_keysc_level_mode(priv, keyin_set);
- if (pdata->kycr2_delay)
- udelay(pdata->kycr2_delay);
+ bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
+ bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
+ bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
- keys ^= ~0;
- keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
- sh_keysc_mode[pdata->mode].keyout)) - 1;
- keys1 &= keys;
- keys0 |= keys;
+ sh_keysc_map_dbg(&pdev->dev, keys, "keys");
- dev_dbg(&pdev->dev, "keys 0x%08lx\n", keys);
+ } while (sh_keysc_read(priv, KYCR2) & 0x01);
- } while (ioread16(priv->iomem_base + KYCR2_OFFS) & 0x01);
-
- dev_dbg(&pdev->dev, "last_keys 0x%08lx keys0 0x%08lx keys1 0x%08lx\n",
- priv->last_keys, keys0, keys1);
+ sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
+ sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
+ sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
k = pdata->keycodes[i];
if (!k)
continue;
- mask = 1 << i;
-
- if (!((priv->last_keys ^ keys0) & mask))
+ if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
continue;
- if ((keys1 | keys0) & mask) {
+ if (test_bit(i, keys1) || test_bit(i, keys0)) {
input_event(priv->input, EV_KEY, k, 1);
- priv->last_keys |= mask;
+ __set_bit(i, priv->last_keys);
}
- if (!(keys1 & mask)) {
+ if (!test_bit(i, keys1)) {
input_event(priv->input, EV_KEY, k, 0);
- priv->last_keys &= ~mask;
+ __clear_bit(i, priv->last_keys);
}
}
@@ -122,8 +162,6 @@
return IRQ_HANDLED;
}
-#define res_size(res) ((res)->end - (res)->start + 1)
-
static int __devinit sh_keysc_probe(struct platform_device *pdev)
{
struct sh_keysc_priv *priv;
@@ -164,7 +202,7 @@
memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
pdata = &priv->pdata;
- priv->iomem_base = ioremap_nocache(res->start, res_size(res));
+ priv->iomem_base = ioremap_nocache(res->start, resource_size(res));
if (priv->iomem_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
@@ -220,10 +258,9 @@
clk_enable(priv->clk);
- iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
- pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
- iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
- iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
+ sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
+ pdata->scan_timing);
+ sh_keysc_level_mode(priv, 0);
device_init_wakeup(&pdev->dev, 1);
@@ -248,7 +285,7 @@
{
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
- iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+ sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
input_unregister_device(priv->input);
free_irq(platform_get_irq(pdev, 0), pdev);
@@ -270,7 +307,7 @@
int irq = platform_get_irq(pdev, 0);
unsigned short value;
- value = ioread16(priv->iomem_base + KYCR1_OFFS);
+ value = sh_keysc_read(priv, KYCR1);
if (device_may_wakeup(dev)) {
value |= 0x80;
@@ -279,7 +316,7 @@
value &= ~0x80;
}
- iowrite16(value, priv->iomem_base + KYCR1_OFFS);
+ sh_keysc_write(priv, KYCR1, value);
return 0;
}
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 71b8243..a8d2b8d 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -149,7 +149,7 @@
apanel_remove(client);
}
-static struct i2c_device_id apanel_id[] = {
+static const struct i2c_device_id apanel_id[] = {
{ "fujitsu_apanel", 0 },
{ }
};
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index 1b87191..dfaa9a0 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -47,7 +47,7 @@
static acpi_status acpi_atlas_button_handler(u32 function,
acpi_physical_address address,
- u32 bit_width, acpi_integer *value,
+ u32 bit_width, u64 *value,
void *handler_context, void *region_context)
{
acpi_status status;
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 3b9f588..4ae0793 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -152,6 +152,13 @@
goto exit_unregister_input;
}
+ err = gpio_direction_input(pdata->gpio_a);
+ if (err) {
+ dev_err(&pdev->dev, "unable to set GPIO %d for input\n",
+ pdata->gpio_a);
+ goto exit_unregister_input;
+ }
+
err = gpio_request(pdata->gpio_b, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "unable to request GPIO %d\n",
@@ -159,6 +166,13 @@
goto exit_free_gpio_a;
}
+ err = gpio_direction_input(pdata->gpio_b);
+ if (err) {
+ dev_err(&pdev->dev, "unable to set GPIO %d for input\n",
+ pdata->gpio_b);
+ goto exit_free_gpio_a;
+ }
+
/* request the IRQs */
err = request_irq(encoder->irq_a, &rotary_encoder_irq,
IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index d3f5724..1477466 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -34,7 +34,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/uinput.h>
@@ -284,7 +283,6 @@
if (!newdev)
return -ENOMEM;
- lock_kernel();
mutex_init(&newdev->mutex);
spin_lock_init(&newdev->requests_lock);
init_waitqueue_head(&newdev->requests_waitq);
@@ -292,7 +290,7 @@
newdev->state = UIST_NEW_DEVICE;
file->private_data = newdev;
- unlock_kernel();
+ nonseekable_open(inode, file);
return 0;
}
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index c8f5a9a..cbec3df 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -538,6 +538,7 @@
data->irdata_count = 0;
data->irdata_off = 0;
data->irdata_error = 0;
+ data->idle_count = 0;
}
/* Adds one bit of irdata */
@@ -1006,7 +1007,6 @@
}
wbcir_reset_irdata(data);
- data->idle_count = 0;
}
out:
@@ -1018,7 +1018,7 @@
/*****************************************************************************
*
- * SUSPEND/RESUME FUNCTIONS
+ * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
*
*****************************************************************************/
@@ -1197,7 +1197,16 @@
}
/* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+ /*
+ * ACPI will set the HW disable bit for SP3 which means that the
+ * output signals are left in an undefined state which may cause
+ * spurious interrupts which we need to ignore until the hardware
+ * is reinitialized.
+ */
+ disable_irq(data->irq);
}
static int
@@ -1207,37 +1216,15 @@
return 0;
}
-static int
-wbcir_resume(struct pnp_dev *device)
-{
- struct wbcir_data *data = pnp_get_drvdata(device);
-
- /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
- /* Clear CEIR_EN */
- wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
-
- /* Enable interrupts */
- wbcir_reset_irdata(data);
- outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
-
- return 0;
-}
-
-
-
-/*****************************************************************************
- *
- * SETUP/INIT FUNCTIONS
- *
- *****************************************************************************/
-
static void
-wbcir_cfg_ceir(struct wbcir_data *data)
+wbcir_init_hw(struct wbcir_data *data)
{
u8 tmp;
+ /* Disable interrupts */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
/* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
tmp = protocol << 4;
if (invert)
@@ -1264,6 +1251,93 @@
* set SP3_IRRX_SW to binary 01, helpfully not documented
*/
outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
+
+ /* Enable extended mode */
+ wbcir_select_bank(data, WBCIR_BANK_2);
+ outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
+
+ /*
+ * Configure baud generator, IR data will be sampled at
+ * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
+ *
+ * The ECIR registers include a flag to change the
+ * 24Mhz clock freq to 48Mhz.
+ *
+ * It's not documented in the specs, but fifo levels
+ * other than 16 seems to be unsupported.
+ */
+
+ /* prescaler 1.0, tx/rx fifo lvl 16 */
+ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
+
+ /* Set baud divisor to generate one byte per bit/cell */
+ switch (protocol) {
+ case IR_PROTOCOL_RC5:
+ outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_RC6:
+ outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ case IR_PROTOCOL_NEC:
+ outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
+ break;
+ }
+ outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+ /* Set CEIR mode */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
+ inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
+ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
+
+ /* Disable RX demod, run-length encoding/decoding, set freq span */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+
+ /* Disable timer */
+ wbcir_select_bank(data, WBCIR_BANK_4);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
+
+ /* Enable MSR interrupt, Clear AUX_IRX */
+ wbcir_select_bank(data, WBCIR_BANK_5);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
+
+ /* Disable CRC */
+ wbcir_select_bank(data, WBCIR_BANK_6);
+ outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
+
+ /* Set RX/TX (de)modulation freq, not really used */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
+ outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
+
+ /* Set invert and pin direction */
+ if (invert)
+ outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
+ else
+ outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
+
+ /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
+ wbcir_select_bank(data, WBCIR_BANK_0);
+ outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
+
+ /* Clear AUX status bits */
+ outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
+
+ /* Enable interrupts */
+ wbcir_reset_irdata(data);
+ outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+}
+
+static int
+wbcir_resume(struct pnp_dev *device)
+{
+ struct wbcir_data *data = pnp_get_drvdata(device);
+
+ wbcir_init_hw(data);
+ enable_irq(data->irq);
+
+ return 0;
}
static int __devinit
@@ -1393,86 +1467,7 @@
device_init_wakeup(&device->dev, 1);
- wbcir_cfg_ceir(data);
-
- /* Disable interrupts */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
- /* Enable extended mode */
- wbcir_select_bank(data, WBCIR_BANK_2);
- outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
-
- /*
- * Configure baud generator, IR data will be sampled at
- * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
- *
- * The ECIR registers include a flag to change the
- * 24Mhz clock freq to 48Mhz.
- *
- * It's not documented in the specs, but fifo levels
- * other than 16 seems to be unsupported.
- */
-
- /* prescaler 1.0, tx/rx fifo lvl 16 */
- outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
-
- /* Set baud divisor to generate one byte per bit/cell */
- switch (protocol) {
- case IR_PROTOCOL_RC5:
- outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- case IR_PROTOCOL_RC6:
- outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- case IR_PROTOCOL_NEC:
- outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
- break;
- }
- outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
-
- /* Set CEIR mode */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
- inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
- inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
-
- /* Disable RX demod, run-length encoding/decoding, set freq span */
- wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
-
- /* Disable timer */
- wbcir_select_bank(data, WBCIR_BANK_4);
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
-
- /* Enable MSR interrupt, Clear AUX_IRX */
- wbcir_select_bank(data, WBCIR_BANK_5);
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
-
- /* Disable CRC */
- wbcir_select_bank(data, WBCIR_BANK_6);
- outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
-
- /* Set RX/TX (de)modulation freq, not really used */
- wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
- outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
-
- /* Set invert and pin direction */
- if (invert)
- outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
- else
- outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
-
- /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
- wbcir_select_bank(data, WBCIR_BANK_0);
- outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
-
- /* Clear AUX status bits */
- outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
-
- /* Enable interrupts */
- outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+ wbcir_init_hw(data);
return 0;
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 90be30e..9169d15 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -68,10 +68,6 @@
MODULE_PARM_DESC(post_interrupt_delay,
"delay (ms) before recal after recal interrupt detected");
-static int autorecal = 1;
-module_param(autorecal, int, 0644);
-MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
-
/*
* When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
* above the pad and still have it send packets. This causes a jump cursor
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 1dacbe0..797314b 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -186,7 +186,7 @@
pci_disable_device(dev);
}
-static struct pci_device_id pcips2_ids[] = {
+static const struct pci_device_id pcips2_ids[] = {
{
.vendor = 0x14f2, /* MOBILITY */
.device = 0x0123, /* Keyboard */
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index e0f3018..c3b626e 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -26,6 +26,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/stddef.h>
#include <linux/module.h>
#include <linux/serio.h>
@@ -119,11 +121,10 @@
error = device_bind_driver(&serio->dev);
if (error) {
- printk(KERN_WARNING
- "serio: device_bind_driver() failed "
- "for %s (%s) and %s, error: %d\n",
- serio->phys, serio->name,
- drv->description, error);
+ dev_warn(&serio->dev,
+ "device_bind_driver() failed for %s (%s) and %s, error: %d\n",
+ serio->phys, serio->name,
+ drv->description, error);
serio_disconnect_driver(serio);
serio->dev.driver = NULL;
return error;
@@ -138,9 +139,9 @@
error = device_attach(&serio->dev);
if (error < 0)
- printk(KERN_WARNING
- "serio: device_attach() failed for %s (%s), error: %d\n",
- serio->phys, serio->name, error);
+ dev_warn(&serio->dev,
+ "device_attach() failed for %s (%s), error: %d\n",
+ serio->phys, serio->name, error);
}
@@ -194,17 +195,14 @@
event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
if (!event) {
- printk(KERN_ERR
- "serio: Not enough memory to queue event %d\n",
- event_type);
+ pr_err("Not enough memory to queue event %d\n", event_type);
retval = -ENOMEM;
goto out;
}
if (!try_module_get(owner)) {
- printk(KERN_WARNING
- "serio: Can't get module reference, dropping event %d\n",
- event_type);
+ pr_warning("Can't get module reference, dropping event %d\n",
+ event_type);
kfree(event);
retval = -EINVAL;
goto out;
@@ -230,14 +228,12 @@
static void serio_remove_duplicate_events(struct serio_event *event)
{
- struct list_head *node, *next;
- struct serio_event *e;
+ struct serio_event *e, *next;
unsigned long flags;
spin_lock_irqsave(&serio_event_lock, flags);
- list_for_each_safe(node, next, &serio_event_list) {
- e = list_entry(node, struct serio_event, node);
+ list_for_each_entry_safe(e, next, &serio_event_list, node) {
if (event->object == e->object) {
/*
* If this event is of different type we should not
@@ -247,7 +243,7 @@
if (event->type != e->type)
break;
- list_del_init(node);
+ list_del_init(&e->node);
serio_free_event(e);
}
}
@@ -258,23 +254,18 @@
static struct serio_event *serio_get_event(void)
{
- struct serio_event *event;
- struct list_head *node;
+ struct serio_event *event = NULL;
unsigned long flags;
spin_lock_irqsave(&serio_event_lock, flags);
- if (list_empty(&serio_event_list)) {
- spin_unlock_irqrestore(&serio_event_lock, flags);
- return NULL;
+ if (!list_empty(&serio_event_list)) {
+ event = list_first_entry(&serio_event_list,
+ struct serio_event, node);
+ list_del_init(&event->node);
}
- node = serio_event_list.next;
- event = list_entry(node, struct serio_event, node);
- list_del_init(node);
-
spin_unlock_irqrestore(&serio_event_lock, flags);
-
return event;
}
@@ -287,29 +278,27 @@
while ((event = serio_get_event())) {
switch (event->type) {
- case SERIO_REGISTER_PORT:
- serio_add_port(event->object);
- break;
- case SERIO_RECONNECT_PORT:
- serio_reconnect_port(event->object);
- break;
+ case SERIO_REGISTER_PORT:
+ serio_add_port(event->object);
+ break;
- case SERIO_RESCAN_PORT:
- serio_disconnect_port(event->object);
- serio_find_driver(event->object);
- break;
+ case SERIO_RECONNECT_PORT:
+ serio_reconnect_port(event->object);
+ break;
- case SERIO_RECONNECT_CHAIN:
- serio_reconnect_chain(event->object);
- break;
+ case SERIO_RESCAN_PORT:
+ serio_disconnect_port(event->object);
+ serio_find_driver(event->object);
+ break;
- case SERIO_ATTACH_DRIVER:
- serio_attach_driver(event->object);
- break;
+ case SERIO_RECONNECT_CHAIN:
+ serio_reconnect_chain(event->object);
+ break;
- default:
- break;
+ case SERIO_ATTACH_DRIVER:
+ serio_attach_driver(event->object);
+ break;
}
serio_remove_duplicate_events(event);
@@ -325,16 +314,14 @@
*/
static void serio_remove_pending_events(void *object)
{
- struct list_head *node, *next;
- struct serio_event *event;
+ struct serio_event *event, *next;
unsigned long flags;
spin_lock_irqsave(&serio_event_lock, flags);
- list_for_each_safe(node, next, &serio_event_list) {
- event = list_entry(node, struct serio_event, node);
+ list_for_each_entry_safe(event, next, &serio_event_list, node) {
if (event->object == object) {
- list_del_init(node);
+ list_del_init(&event->node);
serio_free_event(event);
}
}
@@ -380,7 +367,6 @@
kthread_should_stop() || !list_empty(&serio_event_list));
} while (!kthread_should_stop());
- printk(KERN_DEBUG "serio: kseriod exiting\n");
return 0;
}
@@ -445,6 +431,11 @@
.attrs = serio_device_id_attrs,
};
+static const struct attribute_group *serio_device_attr_groups[] = {
+ &serio_id_attr_group,
+ NULL
+};
+
static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct serio *serio = to_serio_port(dev);
@@ -532,6 +523,7 @@
(long)atomic_inc_return(&serio_no) - 1);
serio->dev.bus = &serio_bus;
serio->dev.release = serio_release_port;
+ serio->dev.groups = serio_device_attr_groups;
if (serio->parent) {
serio->dev.parent = &serio->parent->dev;
serio->depth = serio->parent->depth + 1;
@@ -555,21 +547,15 @@
}
list_add_tail(&serio->node, &serio_list);
+
if (serio->start)
serio->start(serio);
+
error = device_add(&serio->dev);
if (error)
- printk(KERN_ERR
- "serio: device_add() failed for %s (%s), error: %d\n",
+ dev_err(&serio->dev,
+ "device_add() failed for %s (%s), error: %d\n",
serio->phys, serio->name, error);
- else {
- serio->registered = true;
- error = sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group);
- if (error)
- printk(KERN_ERR
- "serio: sysfs_create_group() failed for %s (%s), error: %d\n",
- serio->phys, serio->name, error);
- }
}
/*
@@ -596,11 +582,8 @@
serio->parent = NULL;
}
- if (serio->registered) {
- sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group);
+ if (device_is_registered(&serio->dev))
device_del(&serio->dev);
- serio->registered = false;
- }
list_del_init(&serio->node);
serio_remove_pending_events(serio);
@@ -798,9 +781,8 @@
error = driver_attach(&drv->driver);
if (error)
- printk(KERN_WARNING
- "serio: driver_attach() failed for %s with error %d\n",
- drv->driver.name, error);
+ pr_warning("driver_attach() failed for %s with error %d\n",
+ drv->driver.name, error);
}
int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name)
@@ -820,8 +802,7 @@
error = driver_register(&drv->driver);
if (error) {
- printk(KERN_ERR
- "serio: driver_register() failed for %s, error: %d\n",
+ pr_err("driver_register() failed for %s, error: %d\n",
drv->driver.name, error);
return error;
}
@@ -987,7 +968,7 @@
if (likely(serio->drv)) {
ret = serio->drv->interrupt(serio, data, dfl);
- } else if (!dfl && serio->registered) {
+ } else if (!dfl && device_is_registered(&serio->dev)) {
serio_rescan(serio);
ret = IRQ_HANDLED;
}
@@ -1018,7 +999,7 @@
error = bus_register(&serio_bus);
if (error) {
- printk(KERN_ERR "serio: failed to register serio bus, error: %d\n", error);
+ pr_err("Failed to register serio bus, error: %d\n", error);
return error;
}
@@ -1026,7 +1007,7 @@
if (IS_ERR(serio_task)) {
bus_unregister(&serio_bus);
error = PTR_ERR(serio_task);
- printk(KERN_ERR "serio: Failed to start kseriod, error: %d\n", error);
+ pr_err("Failed to start kseriod, error: %d\n", error);
return error;
}
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index ebb22f8..8298e1f 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -270,7 +270,7 @@
drvdata->irq = r_irq.start;
phys_addr = r_mem.start;
- remap_size = r_mem.end - r_mem.start + 1;
+ remap_size = resource_size(&r_mem);
if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
(unsigned long long)phys_addr);
@@ -344,7 +344,7 @@
if (of_address_to_resource(of_dev->node, 0, &r_mem))
dev_err(dev, "invalid address\n");
else
- release_mem_region(r_mem.start, r_mem.end - r_mem.start + 1);
+ release_mem_region(r_mem.start, resource_size(&r_mem));
kfree(drvdata);
@@ -354,7 +354,7 @@
}
/* Match table for of_platform binding */
-static struct of_device_id xps2_of_match[] __devinitdata = {
+static const struct of_device_id xps2_of_match[] __devinitconst = {
{ .compatible = "xlnx,xps-ps2-1.00.a", },
{ /* end of list */ },
};
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 3d32d3f..866a9ee 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -92,7 +92,7 @@
/* DATA STRUCTURES */
/* Device table */
-static struct usb_device_id gtco_usbid_table [] = {
+static const struct usb_device_id gtco_usbid_table[] = {
{ USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
{ USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
{ USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 16310f3..8fef1b6 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -85,6 +85,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/usb/input.h>
#include <asm/unaligned.h>
@@ -120,6 +121,8 @@
struct urb *urb;
};
+extern const struct usb_device_id wacom_ids[];
+
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
@@ -142,7 +145,5 @@
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id *get_device_table(void);
#endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 072f33b..a1770e6 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -211,7 +211,8 @@
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
- input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_DISTANCE,
+ 0, wacom_wac->features.distance_max, 0, 0);
}
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -261,7 +262,8 @@
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_TOOL_BRUSH) |
BIT_MASK(BTN_TOOL_PENCIL) | BIT_MASK(BTN_TOOL_AIRBRUSH) |
BIT_MASK(BTN_TOOL_LENS) | BIT_MASK(BTN_STYLUS2);
- input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_DISTANCE,
+ 0, wacom_wac->features.distance_max, 0, 0);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
@@ -282,17 +284,19 @@
void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- if (wacom_wac->features->device_type == BTN_TOOL_DOUBLETAP ||
- wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
- input_set_abs_params(input_dev, ABS_RX, 0, wacom_wac->features->x_phy, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, wacom_wac->features->y_phy, 0, 0);
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ struct wacom_features *features = &wacom_wac->features;
+
+ if (features->device_type == BTN_TOOL_DOUBLETAP ||
+ features->device_type == BTN_TOOL_TRIPLETAP) {
+ input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
}
}
void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- if (wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
+ if (wacom_wac->features.device_type == BTN_TOOL_TRIPLETAP) {
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_TRIPLETAP);
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
@@ -532,21 +536,38 @@
struct wacom_wac *wacom_wac;
struct wacom_features *features;
struct input_dev *input_dev;
- int error = -ENOMEM;
+ int error;
+
+ if (!id->driver_info)
+ return -EINVAL;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!wacom || !input_dev || !wacom_wac)
+ if (!wacom || !input_dev || !wacom_wac) {
+ error = -ENOMEM;
goto fail1;
+ }
- wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX, GFP_KERNEL, &wacom->data_dma);
- if (!wacom_wac->data)
+ wacom_wac->features = *((struct wacom_features *)id->driver_info);
+ features = &wacom_wac->features;
+ if (features->pktlen > WACOM_PKGLEN_MAX) {
+ error = -EINVAL;
goto fail1;
+ }
+
+ wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX,
+ GFP_KERNEL, &wacom->data_dma);
+ if (!wacom_wac->data) {
+ error = -ENOMEM;
+ goto fail1;
+ }
wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!wacom->irq)
+ if (!wacom->irq) {
+ error = -ENOMEM;
goto fail2;
+ }
wacom->usbdev = dev;
wacom->dev = input_dev;
@@ -555,11 +576,6 @@
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = features = get_wacom_feature(id);
- BUG_ON(features->pktlen > WACOM_PKGLEN_MAX);
-
- input_dev->name = wacom_wac->features->name;
- wacom->wacom_wac = wacom_wac;
usb_to_input_id(dev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
@@ -576,6 +592,19 @@
if (error)
goto fail2;
+ strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
+
+ if (features->type == TABLETPC || features->type == TABLETPC2FG) {
+ /* Append the device type to the name */
+ strlcat(wacom_wac->name,
+ features->device_type == BTN_TOOL_PEN ?
+ " Pen" : " Finger",
+ sizeof(wacom_wac->name));
+ }
+
+ input_dev->name = wacom_wac->name;
+ wacom->wacom_wac = wacom_wac;
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOUCH);
@@ -640,7 +669,7 @@
static int wacom_resume(struct usb_interface *intf)
{
struct wacom *wacom = usb_get_intfdata(intf);
- struct wacom_features *features = wacom->wacom_wac->features;
+ struct wacom_features *features = &wacom->wacom_wac->features;
int rv;
mutex_lock(&wacom->lock);
@@ -663,6 +692,7 @@
static struct usb_driver wacom_driver = {
.name = "wacom",
+ .id_table = wacom_ids,
.probe = wacom_probe,
.disconnect = wacom_disconnect,
.suspend = wacom_suspend,
@@ -674,7 +704,7 @@
static int __init wacom_init(void)
{
int result;
- wacom_driver.id_table = get_device_table();
+
result = usb_register(&wacom_driver);
if (result == 0)
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 1056f14..3d81443 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -55,6 +55,7 @@
static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
int prox, pressure;
@@ -68,9 +69,9 @@
if (prox) {
wacom->id[0] = ERASER_DEVICE_ID;
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
- if (wacom->features->pressure_max > 255)
+ if (features->pressure_max > 255)
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
- pressure += (wacom->features->pressure_max + 1) / 2;
+ pressure += (features->pressure_max + 1) / 2;
/*
* if going from out of proximity into proximity select between the eraser
@@ -152,6 +153,7 @@
static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
int x, y, rw;
static int penData = 0;
@@ -179,8 +181,7 @@
case 2: /* Mouse with wheel */
wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
- if (wacom->features->type == WACOM_G4 ||
- wacom->features->type == WACOM_MO) {
+ if (features->type == WACOM_G4 || features->type == WACOM_MO) {
rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
wacom_report_rel(wcombo, REL_WHEEL, -rw);
} else
@@ -192,8 +193,7 @@
wacom->id[0] = CURSOR_DEVICE_ID;
wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
- if (wacom->features->type == WACOM_G4 ||
- wacom->features->type == WACOM_MO)
+ if (features->type == WACOM_G4 || features->type == WACOM_MO)
wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
else
wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
@@ -230,7 +230,7 @@
}
/* send pad data */
- switch (wacom->features->type) {
+ switch (features->type) {
case WACOM_G4:
if (data[7] & 0xf8) {
if (penData) {
@@ -300,11 +300,12 @@
static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
int idx = 0;
/* tool number */
- if (wacom->features->type == INTUOS)
+ if (features->type == INTUOS)
idx = data[1] & 0x01;
/* Enter report */
@@ -402,7 +403,7 @@
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_abs(wcombo, ABS_WHEEL, 0);
- if (wacom->features->type >= INTUOS3S)
+ if (features->type >= INTUOS3S)
wacom_report_abs(wcombo, ABS_Z, 0);
}
wacom_report_key(wcombo, wacom->tool[idx], 0);
@@ -416,13 +417,14 @@
static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
unsigned int t;
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L)
+ if (features->type >= INTUOS4S && features->type <= INTUOS4L)
t = (t << 1) | (data[1] & 1);
wacom_report_abs(wcombo, ABS_PRESSURE, t);
wacom_report_abs(wcombo, ABS_TILT_X,
@@ -446,6 +448,7 @@
static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
unsigned int t;
int idx = 0, result;
@@ -457,7 +460,7 @@
}
/* tool number */
- if (wacom->features->type == INTUOS)
+ if (features->type == INTUOS)
idx = data[1] & 0x01;
/* pad packets. Works as a second tool and is always in prox */
@@ -466,7 +469,7 @@
if (wacom->tool[1] != BTN_TOOL_FINGER)
wacom->tool[1] = BTN_TOOL_FINGER;
- if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+ if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
wacom_report_key(wcombo, BTN_0, (data[2] & 0x01));
wacom_report_key(wcombo, BTN_1, (data[3] & 0x01));
wacom_report_key(wcombo, BTN_2, (data[3] & 0x02));
@@ -480,7 +483,7 @@
/* Out of proximity, clear wheel value. */
wacom_report_abs(wcombo, ABS_WHEEL, 0);
}
- if (wacom->features->type != INTUOS4S) {
+ if (features->type != INTUOS4S) {
wacom_report_key(wcombo, BTN_7, (data[3] & 0x40));
wacom_report_key(wcombo, BTN_8, (data[3] & 0x80));
}
@@ -528,18 +531,20 @@
return 0;
/* Only large Intuos support Lense Cursor */
- if ((wacom->tool[idx] == BTN_TOOL_LENS)
- && ((wacom->features->type == INTUOS3)
- || (wacom->features->type == INTUOS3S)
- || (wacom->features->type == INTUOS4)
- || (wacom->features->type == INTUOS4S)))
+ if (wacom->tool[idx] == BTN_TOOL_LENS &&
+ (features->type == INTUOS3 ||
+ features->type == INTUOS3S ||
+ features->type == INTUOS4 ||
+ features->type == INTUOS4S)) {
+
return 0;
+ }
/* Cintiq doesn't send data when RDY bit isn't set */
- if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+ if (features->type == CINTIQ && !(data[1] & 0x40))
return 0;
- if (wacom->features->type >= INTUOS3S) {
+ if (features->type >= INTUOS3S) {
wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
@@ -557,7 +562,7 @@
if (data[1] & 0x02) {
/* Rotation packet */
- if (wacom->features->type >= INTUOS3S) {
+ if (features->type >= INTUOS3S) {
/* I3 marker pen rotation */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
@@ -570,7 +575,7 @@
((t - 1) / 2) : -t / 2);
}
- } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) {
+ } else if (!(data[1] & 0x10) && features->type < INTUOS3S) {
/* 4D mouse packet */
wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
@@ -583,7 +588,7 @@
} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* I4 mouse */
- if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+ if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
wacom_report_key(wcombo, BTN_LEFT, data[6] & 0x01);
wacom_report_key(wcombo, BTN_MIDDLE, data[6] & 0x02);
wacom_report_key(wcombo, BTN_RIGHT, data[6] & 0x04);
@@ -604,13 +609,13 @@
- ((data[8] & 0x02) >> 1));
/* I3 2D mouse side buttons */
- if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
+ if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40);
wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20);
}
}
- } else if ((wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L ||
- wacom->features->type == INTUOS4L) &&
+ } else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
+ features->type == INTUOS4L) &&
wacom->tool[idx] == BTN_TOOL_LENS) {
/* Lens cursor packets */
wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
@@ -718,6 +723,7 @@
static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
{
+ struct wacom_features *features = &wacom->features;
char *data = wacom->data;
int prox = 0, pressure, idx = -1;
static int stylusInProx, touchInProx = 1, touchOut;
@@ -791,7 +797,7 @@
wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
pressure = ((data[7] & 0x01) << 8) | data[6];
if (pressure < 0)
- pressure = wacom->features->pressure_max + pressure + 1;
+ pressure = features->pressure_max + pressure + 1;
wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
} else {
@@ -815,7 +821,7 @@
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
- switch (wacom_wac->features->type) {
+ switch (wacom_wac->features.type) {
case PENPARTNER:
return wacom_penpartner_irq(wacom_wac, wcombo);
@@ -853,7 +859,7 @@
void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- switch (wacom_wac->features->type) {
+ switch (wacom_wac->features.type) {
case WACOM_MO:
input_dev_mo(input_dev, wacom_wac);
case WACOM_G4:
@@ -888,7 +894,7 @@
/* fall through */
case TABLETPC:
input_dev_tpc(input_dev, wacom_wac);
- if (wacom_wac->features->device_type != BTN_TOOL_PEN)
+ if (wacom_wac->features.device_type != BTN_TOOL_PEN)
break; /* no need to process stylus stuff */
/* fall through */
@@ -903,153 +909,201 @@
return;
}
-static struct wacom_features wacom_features[] = {
- { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, 0, PENPARTNER },
- { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE },
- { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE },
- { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, 63, GRAPHIRE },
- { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, GRAPHIRE },
- { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE },
- { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, WACOM_G4 },
- { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, WACOM_G4 },
- { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO },
- { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, 63, WACOM_MO },
- { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE },
- { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE },
- { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, 63, GRAPHIRE },
- { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE },
- { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, 63, GRAPHIRE },
- { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, 63, GRAPHIRE },
- { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO },
- { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE },
- { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS },
- { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS },
- { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS },
- { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS },
- { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS },
- { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, 0, PL },
- { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, 0, PL },
- { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, 0, PL },
- { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, 0, PL },
- { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, 0, PL },
- { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, 0, PL },
- { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, 0, PL },
- { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL },
- { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, 0, PL },
- { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL },
- { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL },
- { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL },
- { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, 0, PTU },
- { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS },
- { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS },
- { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS },
- { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS },
- { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS },
- { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, 63, INTUOS3S },
- { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, 63, INTUOS3L },
- { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, 63, INTUOS3L },
- { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, 63, INTUOS3 },
- { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, 63, INTUOS3S },
- { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, 63, INTUOS4S },
- { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS4 },
- { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOS4L },
- { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, 63, INTUOS4L },
- { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ },
- { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, 63, WACOM_BEE },
- { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE },
- { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL },
- { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC },
- { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC },
- { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC },
- { "Wacom ISDv4 9F", WACOM_PKGLEN_PENABLED, 26202, 16325, 255, 0, TABLETPC },
- { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG },
- { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG },
- { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS },
+static const struct wacom_features wacom_features_0x00 =
+ { "Wacom Penpartner", WACOM_PKGLEN_PENPRTN, 5040, 3780, 255, 0, PENPARTNER };
+static const struct wacom_features wacom_features_0x10 =
+ { "Wacom Graphire", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x11 =
+ { "Wacom Graphire2 4x5", WACOM_PKGLEN_GRAPHIRE, 10206, 7422, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x12 =
+ { "Wacom Graphire2 5x7", WACOM_PKGLEN_GRAPHIRE, 13918, 10206, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x13 =
+ { "Wacom Graphire3", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x14 =
+ { "Wacom Graphire3 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x15 =
+ { "Wacom Graphire4 4x5", WACOM_PKGLEN_GRAPHIRE, 10208, 7424, 511, 63, WACOM_G4 };
+static const struct wacom_features wacom_features_0x16 =
+ { "Wacom Graphire4 6x8", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, WACOM_G4 };
+static const struct wacom_features wacom_features_0x17 =
+ { "Wacom BambooFun 4x5", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x18 =
+ { "Wacom BambooFun 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x19 =
+ { "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE, 16704, 12064, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x60 =
+ { "Wacom Volito", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x61 =
+ { "Wacom PenStation2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 255, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x62 =
+ { "Wacom Volito2 4x5", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x63 =
+ { "Wacom Volito2 2x3", WACOM_PKGLEN_GRAPHIRE, 3248, 2320, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x64 =
+ { "Wacom PenPartner2", WACOM_PKGLEN_GRAPHIRE, 3250, 2320, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x65 =
+ { "Wacom Bamboo", WACOM_PKGLEN_BBFUN, 14760, 9225, 511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x69 =
+ { "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x20 =
+ { "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x21 =
+ { "Wacom Intuos 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x22 =
+ { "Wacom Intuos 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x23 =
+ { "Wacom Intuos 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x24 =
+ { "Wacom Intuos 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x30 =
+ { "Wacom PL400", WACOM_PKGLEN_GRAPHIRE, 5408, 4056, 255, 0, PL };
+static const struct wacom_features wacom_features_0x31 =
+ { "Wacom PL500", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 255, 0, PL };
+static const struct wacom_features wacom_features_0x32 =
+ { "Wacom PL600", WACOM_PKGLEN_GRAPHIRE, 6126, 4604, 255, 0, PL };
+static const struct wacom_features wacom_features_0x33 =
+ { "Wacom PL600SX", WACOM_PKGLEN_GRAPHIRE, 6260, 5016, 255, 0, PL };
+static const struct wacom_features wacom_features_0x34 =
+ { "Wacom PL550", WACOM_PKGLEN_GRAPHIRE, 6144, 4608, 511, 0, PL };
+static const struct wacom_features wacom_features_0x35 =
+ { "Wacom PL800", WACOM_PKGLEN_GRAPHIRE, 7220, 5780, 511, 0, PL };
+static const struct wacom_features wacom_features_0x37 =
+ { "Wacom PL700", WACOM_PKGLEN_GRAPHIRE, 6758, 5406, 511, 0, PL };
+static const struct wacom_features wacom_features_0x38 =
+ { "Wacom PL510", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL };
+static const struct wacom_features wacom_features_0x39 =
+ { "Wacom DTU710", WACOM_PKGLEN_GRAPHIRE, 34080, 27660, 511, 0, PL };
+static const struct wacom_features wacom_features_0xC4 =
+ { "Wacom DTF521", WACOM_PKGLEN_GRAPHIRE, 6282, 4762, 511, 0, PL };
+static const struct wacom_features wacom_features_0xC0 =
+ { "Wacom DTF720", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL };
+static const struct wacom_features wacom_features_0xC2 =
+ { "Wacom DTF720a", WACOM_PKGLEN_GRAPHIRE, 6858, 5506, 511, 0, PL };
+static const struct wacom_features wacom_features_0x03 =
+ { "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE, 20480, 15360, 511, 0, PTU };
+static const struct wacom_features wacom_features_0x41 =
+ { "Wacom Intuos2 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x42 =
+ { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x43 =
+ { "Wacom Intuos2 9x12", WACOM_PKGLEN_INTUOS, 30480, 24060, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x44 =
+ { "Wacom Intuos2 12x12", WACOM_PKGLEN_INTUOS, 30480, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x45 =
+ { "Wacom Intuos2 12x18", WACOM_PKGLEN_INTUOS, 45720, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0xB0 =
+ { "Wacom Intuos3 4x5", WACOM_PKGLEN_INTUOS, 25400, 20320, 1023, 63, INTUOS3S };
+static const struct wacom_features wacom_features_0xB1 =
+ { "Wacom Intuos3 6x8", WACOM_PKGLEN_INTUOS, 40640, 30480, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB2 =
+ { "Wacom Intuos3 9x12", WACOM_PKGLEN_INTUOS, 60960, 45720, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB3 =
+ { "Wacom Intuos3 12x12", WACOM_PKGLEN_INTUOS, 60960, 60960, 1023, 63, INTUOS3L };
+static const struct wacom_features wacom_features_0xB4 =
+ { "Wacom Intuos3 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 1023, 63, INTUOS3L };
+static const struct wacom_features wacom_features_0xB5 =
+ { "Wacom Intuos3 6x11", WACOM_PKGLEN_INTUOS, 54204, 31750, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB7 =
+ { "Wacom Intuos3 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 1023, 63, INTUOS3S };
+static const struct wacom_features wacom_features_0xB8 =
+ { "Wacom Intuos4 4x6", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, 63, INTUOS4S };
+static const struct wacom_features wacom_features_0xB9 =
+ { "Wacom Intuos4 6x9", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS4 };
+static const struct wacom_features wacom_features_0xBA =
+ { "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0xBB =
+ { "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0x3F =
+ { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ };
+static const struct wacom_features wacom_features_0xC5 =
+ { "Wacom Cintiq 20WSX", WACOM_PKGLEN_INTUOS, 86680, 54180, 1023, 63, WACOM_BEE };
+static const struct wacom_features wacom_features_0xC6 =
+ { "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE };
+static const struct wacom_features wacom_features_0xC7 =
+ { "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL };
+static const struct wacom_features wacom_features_0x90 =
+ { "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
+static const struct wacom_features wacom_features_0x93 =
+ { "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
+static const struct wacom_features wacom_features_0x9A =
+ { "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
+static const struct wacom_features wacom_features_0x9F =
+ { "Wacom ISDv4 9F", WACOM_PKGLEN_PENABLED, 26202, 16325, 255, 0, TABLETPC };
+static const struct wacom_features wacom_features_0xE2 =
+ { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG };
+static const struct wacom_features wacom_features_0xE3 =
+ { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG };
+static const struct wacom_features wacom_features_0x47 =
+ { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
+
+#define USB_DEVICE_WACOM(prod) \
+ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
+ .driver_info = (kernel_ulong_t)&wacom_features_##prod
+
+const struct usb_device_id wacom_ids[] = {
+ { USB_DEVICE_WACOM(0x00) },
+ { USB_DEVICE_WACOM(0x10) },
+ { USB_DEVICE_WACOM(0x11) },
+ { USB_DEVICE_WACOM(0x12) },
+ { USB_DEVICE_WACOM(0x13) },
+ { USB_DEVICE_WACOM(0x14) },
+ { USB_DEVICE_WACOM(0x15) },
+ { USB_DEVICE_WACOM(0x16) },
+ { USB_DEVICE_WACOM(0x17) },
+ { USB_DEVICE_WACOM(0x18) },
+ { USB_DEVICE_WACOM(0x19) },
+ { USB_DEVICE_WACOM(0x60) },
+ { USB_DEVICE_WACOM(0x61) },
+ { USB_DEVICE_WACOM(0x62) },
+ { USB_DEVICE_WACOM(0x63) },
+ { USB_DEVICE_WACOM(0x64) },
+ { USB_DEVICE_WACOM(0x65) },
+ { USB_DEVICE_WACOM(0x69) },
+ { USB_DEVICE_WACOM(0x20) },
+ { USB_DEVICE_WACOM(0x21) },
+ { USB_DEVICE_WACOM(0x22) },
+ { USB_DEVICE_WACOM(0x23) },
+ { USB_DEVICE_WACOM(0x24) },
+ { USB_DEVICE_WACOM(0x30) },
+ { USB_DEVICE_WACOM(0x31) },
+ { USB_DEVICE_WACOM(0x32) },
+ { USB_DEVICE_WACOM(0x33) },
+ { USB_DEVICE_WACOM(0x34) },
+ { USB_DEVICE_WACOM(0x35) },
+ { USB_DEVICE_WACOM(0x37) },
+ { USB_DEVICE_WACOM(0x38) },
+ { USB_DEVICE_WACOM(0x39) },
+ { USB_DEVICE_WACOM(0xC4) },
+ { USB_DEVICE_WACOM(0xC0) },
+ { USB_DEVICE_WACOM(0xC2) },
+ { USB_DEVICE_WACOM(0x03) },
+ { USB_DEVICE_WACOM(0x41) },
+ { USB_DEVICE_WACOM(0x42) },
+ { USB_DEVICE_WACOM(0x43) },
+ { USB_DEVICE_WACOM(0x44) },
+ { USB_DEVICE_WACOM(0x45) },
+ { USB_DEVICE_WACOM(0xB0) },
+ { USB_DEVICE_WACOM(0xB1) },
+ { USB_DEVICE_WACOM(0xB2) },
+ { USB_DEVICE_WACOM(0xB3) },
+ { USB_DEVICE_WACOM(0xB4) },
+ { USB_DEVICE_WACOM(0xB5) },
+ { USB_DEVICE_WACOM(0xB7) },
+ { USB_DEVICE_WACOM(0xB8) },
+ { USB_DEVICE_WACOM(0xB9) },
+ { USB_DEVICE_WACOM(0xBA) },
+ { USB_DEVICE_WACOM(0xBB) },
+ { USB_DEVICE_WACOM(0x3F) },
+ { USB_DEVICE_WACOM(0xC5) },
+ { USB_DEVICE_WACOM(0xC6) },
+ { USB_DEVICE_WACOM(0xC7) },
+ { USB_DEVICE_WACOM(0x90) },
+ { USB_DEVICE_WACOM(0x93) },
+ { USB_DEVICE_WACOM(0x9A) },
+ { USB_DEVICE_WACOM(0x9F) },
+ { USB_DEVICE_WACOM(0xE2) },
+ { USB_DEVICE_WACOM(0xE3) },
+ { USB_DEVICE_WACOM(0x47) },
{ }
};
-
-static struct usb_device_id wacom_ids[] = {
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x69) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB8) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB9) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBA) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBB) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9F) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xE2) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xE3) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
- { }
-};
-
-const struct usb_device_id *get_device_table(void)
-{
- const struct usb_device_id *id_table = wacom_ids;
-
- return id_table;
-}
-
-struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
-{
- int index = id - wacom_ids;
- struct wacom_features *wf = &wacom_features[index];
-
- return wf;
-}
-
MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index ee01e19..8590b1e 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -15,11 +15,11 @@
/* packet length for individual models */
#define WACOM_PKGLEN_PENPRTN 7
#define WACOM_PKGLEN_GRAPHIRE 8
-#define WACOM_PKGLEN_BBFUN 9
-#define WACOM_PKGLEN_INTUOS 10
+#define WACOM_PKGLEN_BBFUN 9
+#define WACOM_PKGLEN_INTUOS 10
#define WACOM_PKGLEN_PENABLED 8
#define WACOM_PKGLEN_TPC1FG 5
-#define WACOM_PKGLEN_TPC2FG 14
+#define WACOM_PKGLEN_TPC2FG 14
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
@@ -58,7 +58,7 @@
};
struct wacom_features {
- char *name;
+ const char *name;
int pktlen;
int x_max;
int y_max;
@@ -73,11 +73,12 @@
};
struct wacom_wac {
+ char name[64];
unsigned char *data;
- int tool[2];
- int id[2];
- __u32 serial[2];
- struct wacom_features *features;
+ int tool[2];
+ int id[2];
+ __u32 serial[2];
+ struct wacom_features features;
};
#endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index dfafc76..6457e06 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -90,7 +90,6 @@
tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
depends on PXA_SHARPSL
select CORGI_SSP_DEPRECATED
- default y
help
Say Y here to enable the driver for the touchscreen on the
Sharp SL-C7xx and SL-Cxx00 series of PDAs.
@@ -537,6 +536,11 @@
bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
depends on TOUCHSCREEN_USB_COMPOSITE
+config TOUCHSCREEN_USB_NEXIO
+ default y
+ bool "NEXIO/iNexio device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
config TOUCHSCREEN_TOUCHIT213
tristate "Sahara TouchIT-213 touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 52d2ca1..8b05d8e 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -27,6 +27,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/consumer.h>
#include <asm/irq.h>
/*
@@ -85,6 +86,7 @@
char name[32];
struct spi_device *spi;
+ struct regulator *reg;
#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
struct attribute_group *attr_group;
@@ -788,6 +790,8 @@
}
}
+ regulator_disable(ts->reg);
+
/* we know the chip's in lowpower mode since we always
* leave it that way after every request
*/
@@ -799,6 +803,8 @@
if (!ts->disabled)
return;
+ regulator_enable(ts->reg);
+
ts->disabled = 0;
ts->irq_disabled = 0;
enable_irq(ts->spi->irq);
@@ -1139,6 +1145,19 @@
ts->last_msg = m;
+ ts->reg = regulator_get(&spi->dev, "vcc");
+ if (IS_ERR(ts->reg)) {
+ dev_err(&spi->dev, "unable to get regulator: %ld\n",
+ PTR_ERR(ts->reg));
+ goto err_free_gpio;
+ }
+
+ err = regulator_enable(ts->reg);
+ if (err) {
+ dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
+ goto err_put_regulator;
+ }
+
if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
spi->dev.driver->name, ts)) {
dev_info(&spi->dev,
@@ -1148,7 +1167,7 @@
spi->dev.driver->name, ts);
if (err) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
- goto err_free_gpio;
+ goto err_disable_regulator;
}
}
@@ -1180,6 +1199,10 @@
ads784x_hwmon_unregister(spi, ts);
err_free_irq:
free_irq(spi->irq, ts);
+ err_disable_regulator:
+ regulator_disable(ts->reg);
+ err_put_regulator:
+ regulator_put(ts->reg);
err_free_gpio:
if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown);
@@ -1208,6 +1231,9 @@
/* suspend left the IRQ disabled */
enable_irq(ts->spi->irq);
+ regulator_disable(ts->reg);
+ regulator_put(ts->reg);
+
if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown);
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 8f38c5e..486d31b 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -72,45 +72,49 @@
struct input_dev *dev = elo->dev;
elo->data[elo->idx] = data;
- switch (elo->idx++) {
- case 0:
- elo->csum = 0xaa;
- if (data != ELO10_LEAD_BYTE) {
- pr_debug("elo: unsynchronized data: 0x%02x\n", data);
- elo->idx = 0;
- }
- break;
- case 9:
+ switch (elo->idx++) {
+ case 0:
+ elo->csum = 0xaa;
+ if (data != ELO10_LEAD_BYTE) {
+ dev_dbg(&elo->serio->dev,
+ "unsynchronized data: 0x%02x\n", data);
elo->idx = 0;
- if (data != elo->csum) {
- pr_debug("elo: bad checksum: 0x%02x, expected 0x%02x\n",
- data, elo->csum);
- break;
- }
- if (elo->data[1] != elo->expected_packet) {
- if (elo->data[1] != ELO10_TOUCH_PACKET)
- pr_debug("elo: unexpected packet: 0x%02x\n",
- elo->data[1]);
- break;
- }
- if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
- input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
- input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
- if (elo->data[2] & ELO10_PRESSURE)
- input_report_abs(dev, ABS_PRESSURE,
- (elo->data[8] << 8) | elo->data[7]);
- input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
- input_sync(dev);
- } else if (elo->data[1] == ELO10_ACK_PACKET) {
- if (elo->data[2] == '0')
- elo->expected_packet = ELO10_TOUCH_PACKET;
- complete(&elo->cmd_done);
- } else {
- memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
- elo->expected_packet = ELO10_ACK_PACKET;
- }
+ }
+ break;
+
+ case 9:
+ elo->idx = 0;
+ if (data != elo->csum) {
+ dev_dbg(&elo->serio->dev,
+ "bad checksum: 0x%02x, expected 0x%02x\n",
+ data, elo->csum);
break;
+ }
+ if (elo->data[1] != elo->expected_packet) {
+ if (elo->data[1] != ELO10_TOUCH_PACKET)
+ dev_dbg(&elo->serio->dev,
+ "unexpected packet: 0x%02x\n",
+ elo->data[1]);
+ break;
+ }
+ if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
+ input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
+ input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
+ if (elo->data[2] & ELO10_PRESSURE)
+ input_report_abs(dev, ABS_PRESSURE,
+ (elo->data[8] << 8) | elo->data[7]);
+ input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
+ input_sync(dev);
+ } else if (elo->data[1] == ELO10_ACK_PACKET) {
+ if (elo->data[2] == '0')
+ elo->expected_packet = ELO10_TOUCH_PACKET;
+ complete(&elo->cmd_done);
+ } else {
+ memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
+ elo->expected_packet = ELO10_ACK_PACKET;
+ }
+ break;
}
elo->csum += data;
}
@@ -123,42 +127,53 @@
switch (elo->idx++) {
- case 0: if ((data & 0xc0) != 0xc0) elo->idx = 0; break;
- case 1: if ((data & 0xc0) != 0x80) elo->idx = 0; break;
- case 2: if ((data & 0xc0) != 0x40) elo->idx = 0; break;
+ case 0:
+ if ((data & 0xc0) != 0xc0)
+ elo->idx = 0;
+ break;
- case 3:
- if (data & 0xc0) {
- elo->idx = 0;
- break;
- }
+ case 1:
+ if ((data & 0xc0) != 0x80)
+ elo->idx = 0;
+ break;
- input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
- input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
+ case 2:
+ if ((data & 0xc0) != 0x40)
+ elo->idx = 0;
+ break;
- if (elo->id == 2) {
- input_report_key(dev, BTN_TOUCH, 1);
- input_sync(dev);
- elo->idx = 0;
- }
-
- break;
-
- case 4:
- if (data) {
- input_sync(dev);
- elo->idx = 0;
- }
- break;
-
- case 5:
- if ((data & 0xf0) == 0) {
- input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
- input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
- }
- input_sync(dev);
+ case 3:
+ if (data & 0xc0) {
elo->idx = 0;
break;
+ }
+
+ input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
+ input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
+
+ if (elo->id == 2) {
+ input_report_key(dev, BTN_TOUCH, 1);
+ input_sync(dev);
+ elo->idx = 0;
+ }
+
+ break;
+
+ case 4:
+ if (data) {
+ input_sync(dev);
+ elo->idx = 0;
+ }
+ break;
+
+ case 5:
+ if ((data & 0xf0) == 0) {
+ input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
+ input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
+ }
+ input_sync(dev);
+ elo->idx = 0;
+ break;
}
}
@@ -170,17 +185,17 @@
switch (elo->idx++) {
- case 0:
- if ((data & 0x7f) != 0x01)
- elo->idx = 0;
- break;
- case 2:
- input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
- input_report_abs(dev, ABS_X, elo->data[1]);
- input_report_abs(dev, ABS_Y, elo->data[2]);
- input_sync(dev);
+ case 0:
+ if ((data & 0x7f) != 0x01)
elo->idx = 0;
- break;
+ break;
+ case 2:
+ input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
+ input_report_abs(dev, ABS_X, elo->data[1]);
+ input_report_abs(dev, ABS_Y, elo->data[2]);
+ input_sync(dev);
+ elo->idx = 0;
+ break;
}
}
@@ -189,19 +204,19 @@
{
struct elo *elo = serio_get_drvdata(serio);
- switch(elo->id) {
- case 0:
- elo_process_data_10(elo, data);
- break;
+ switch (elo->id) {
+ case 0:
+ elo_process_data_10(elo, data);
+ break;
- case 1:
- case 2:
- elo_process_data_6(elo, data);
- break;
+ case 1:
+ case 2:
+ elo_process_data_6(elo, data);
+ break;
- case 3:
- elo_process_data_3(elo, data);
- break;
+ case 3:
+ elo_process_data_3(elo, data);
+ break;
}
return IRQ_HANDLED;
@@ -261,10 +276,10 @@
if (packet[3] & ELO10_PRESSURE)
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
- printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: 0x%02x, controller: 0x%02x\n",
- elo_types[(packet[1] -'0') & 0x03],
- packet[5], packet[4], packet[3], packet[7]);
+ dev_info(&elo->serio->dev,
+ "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n",
+ elo_types[(packet[1] -'0') & 0x03],
+ packet[5], packet[4], packet[3], packet[7]);
return 0;
}
@@ -330,24 +345,24 @@
switch (elo->id) {
- case 0: /* 10-byte protocol */
- if (elo_setup_10(elo))
- goto fail3;
+ case 0: /* 10-byte protocol */
+ if (elo_setup_10(elo))
+ goto fail3;
- break;
+ break;
- case 1: /* 6-byte protocol */
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
+ case 1: /* 6-byte protocol */
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
- case 2: /* 4-byte protocol */
- input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
- break;
+ case 2: /* 4-byte protocol */
+ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
+ break;
- case 3: /* 3-byte protocol */
- input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
- break;
+ case 3: /* 3-byte protocol */
+ input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
+ break;
}
err = input_register_device(elo->dev);
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 6cdcf2a..b6b8b1c 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -153,6 +153,9 @@
if (pressure)
p = MODR;
+ dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+ x, y, p);
+
/* are samples valid */
if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
(y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 6386b44..3755a47 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -128,27 +128,29 @@
down = get_down(data0, data1);
- if (ts.count == (1 << ts.shift)) {
- ts.xp >>= ts.shift;
- ts.yp >>= ts.shift;
-
- dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
- __func__, ts.xp, ts.yp, ts.count);
-
- input_report_abs(ts.input, ABS_X, ts.xp);
- input_report_abs(ts.input, ABS_Y, ts.yp);
-
- input_report_key(ts.input, BTN_TOUCH, 1);
- input_sync(ts.input);
-
- ts.xp = 0;
- ts.yp = 0;
- ts.count = 0;
- }
-
if (down) {
+ if (ts.count == (1 << ts.shift)) {
+ ts.xp >>= ts.shift;
+ ts.yp >>= ts.shift;
+
+ dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
+ __func__, ts.xp, ts.yp, ts.count);
+
+ input_report_abs(ts.input, ABS_X, ts.xp);
+ input_report_abs(ts.input, ABS_Y, ts.yp);
+
+ input_report_key(ts.input, BTN_TOUCH, 1);
+ input_sync(ts.input);
+
+ ts.xp = 0;
+ ts.yp = 0;
+ ts.count = 0;
+ }
+
s3c_adc_start(ts.client, 0, 1 << ts.shift);
} else {
+ ts.xp = 0;
+ ts.yp = 0;
ts.count = 0;
input_report_key(ts.input, BTN_TOUCH, 0);
@@ -401,6 +403,7 @@
struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;
clk_enable(ts.clock);
+ enable_irq(ts.irq_tc);
/* Initialise registers */
if ((info->delay & 0xffff) > 0)
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 7ef0d14..be23780 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -358,7 +358,7 @@
return 0;
}
-static struct i2c_device_id tsc2007_idtable[] = {
+static const struct i2c_device_id tsc2007_idtable[] = {
{ "tsc2007", 0 },
{ }
};
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 5256123..99330bb 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -15,6 +15,7 @@
* - GoTop Super_Q2/GogoPen/PenPower tablets
* - JASTEC USB touch controller/DigiTech DTR-02U
* - Zytronic capacitive touchscreen
+ * - NEXIO/iNexio
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -95,6 +96,7 @@
int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
int (*init) (struct usbtouch_usb *usbtouch);
+ void (*exit) (struct usbtouch_usb *usbtouch);
};
/* a usbtouch device */
@@ -104,11 +106,12 @@
unsigned char *buffer;
int buf_len;
struct urb *irq;
- struct usb_device *udev;
+ struct usb_interface *interface;
struct input_dev *input;
struct usbtouch_device_info *type;
char name[128];
char phys[64];
+ void *priv;
int x, y;
int touch, press;
@@ -133,6 +136,7 @@
DEVTYPE_E2I,
DEVTYPE_ZYTRONIC,
DEVTYPE_TC5UH,
+ DEVTYPE_NEXIO,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -144,7 +148,7 @@
.bInterfaceClass = USB_INTERFACE_CLASS_HID, \
.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE
-static struct usb_device_id usbtouch_devices[] = {
+static const struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
/* ignore the HID capable devices, handled by usbhid */
{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
@@ -222,6 +226,14 @@
{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ /* data interface only */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+#endif
+
{}
};
@@ -234,8 +246,9 @@
static int e2i_init(struct usbtouch_usb *usbtouch)
{
int ret;
+ struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
- ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -344,8 +357,9 @@
static int mtouch_init(struct usbtouch_usb *usbtouch)
{
int ret, i;
+ struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
- ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -356,7 +370,7 @@
msleep(150);
for (i = 0; i < 3; i++) {
- ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -489,7 +503,7 @@
static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
{
- struct usb_device *dev = usbtouch->udev;
+ struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
int ret = -ENOMEM;
unsigned char *buf;
@@ -690,6 +704,229 @@
#endif
/*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT 5000
+#define NEXIO_BUFSIZE 1024
+#define NEXIO_THRESHOLD 50
+
+struct nexio_priv {
+ struct urb *ack;
+ unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+ u8 flags; /* 0xe1 = touch, 0xe1 = release */
+ __be16 data_len; /* total bytes of touch data */
+ __be16 x_len; /* bytes for X axis */
+ __be16 y_len; /* bytes for Y axis */
+ u8 data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static void nexio_ack_complete(struct urb *urb)
+{
+}
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+ struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+ struct nexio_priv *priv;
+ int ret = -ENOMEM;
+ int actual_len, i;
+ unsigned char *buf;
+ char *firmware_ver = NULL, *device_name = NULL;
+ int input_ep = 0, output_ep = 0;
+
+ /* find first input and output endpoint */
+ for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+ if (!input_ep &&
+ usb_endpoint_dir_in(&interface->endpoint[i].desc))
+ input_ep = interface->endpoint[i].desc.bEndpointAddress;
+ if (!output_ep &&
+ usb_endpoint_dir_out(&interface->endpoint[i].desc))
+ output_ep = interface->endpoint[i].desc.bEndpointAddress;
+ }
+ if (!input_ep || !output_ep)
+ return -ENXIO;
+
+ buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ goto out_buf;
+
+ /* two empty reads */
+ for (i = 0; i < 2; i++) {
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+ }
+
+ /* send init command */
+ memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+ buf, sizeof(nexio_init_pkt), &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto out_buf;
+
+ /* read replies */
+ for (i = 0; i < 3; i++) {
+ memset(buf, 0, NEXIO_BUFSIZE);
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+ buf, NEXIO_BUFSIZE, &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+ continue;
+ switch (buf[0]) {
+ case 0x83: /* firmware version */
+ if (!firmware_ver)
+ firmware_ver = kstrdup(&buf[2], GFP_KERNEL);
+ break;
+ case 0x84: /* device name */
+ if (!device_name)
+ device_name = kstrdup(&buf[2], GFP_KERNEL);
+ break;
+ }
+ }
+
+ printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+ device_name, firmware_ver);
+
+ kfree(firmware_ver);
+ kfree(device_name);
+
+ /* prepare ACK URB */
+ ret = -ENOMEM;
+
+ usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+ if (!usbtouch->priv)
+ goto out_buf;
+
+ priv = usbtouch->priv;
+
+ priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+ if (!priv->ack_buf)
+ goto err_priv;
+
+ memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
+
+ priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+ if (!priv->ack) {
+ dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+ goto err_ack_buf;
+ }
+
+ usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+ priv->ack_buf, sizeof(nexio_ack_pkt),
+ nexio_ack_complete, usbtouch);
+ ret = 0;
+ goto out_buf;
+
+err_ack_buf:
+ kfree(priv->ack_buf);
+err_priv:
+ kfree(priv);
+out_buf:
+ kfree(buf);
+ return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+ struct nexio_priv *priv = usbtouch->priv;
+
+ usb_kill_urb(priv->ack);
+ usb_free_urb(priv->ack);
+ kfree(priv->ack_buf);
+ kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+ int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+ struct nexio_touch_packet *packet = (void *) pkt;
+ struct nexio_priv *priv = usbtouch->priv;
+
+ /* got touch data? */
+ if ((pkt[0] & 0xe0) != 0xe0)
+ return 0;
+
+ /* send ACK */
+ ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+ if (!usbtouch->type->max_xc) {
+ usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
+ input_set_abs_params(usbtouch->input, ABS_X, 0,
+ 2 * be16_to_cpu(packet->x_len), 0, 0);
+ usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0,
+ 2 * be16_to_cpu(packet->y_len), 0, 0);
+ }
+ /*
+ * The device reports state of IR sensors on X and Y axes.
+ * Each byte represents "darkness" percentage (0-100) of one element.
+ * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+ * This also means that there's a limited multi-touch capability but
+ * it's disabled (and untested) here as there's no X driver for that.
+ */
+ begin_x = end_x = begin_y = end_y = -1;
+ for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+ if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+ begin_x = x;
+ continue;
+ }
+ if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+ end_x = x - 1;
+ for (y = be16_to_cpu(packet->x_len);
+ y < be16_to_cpu(packet->data_len); y++) {
+ if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+ begin_y = y - be16_to_cpu(packet->x_len);
+ continue;
+ }
+ if (end_y == -1 &&
+ begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+ end_y = y - 1 - be16_to_cpu(packet->x_len);
+ w = end_x - begin_x;
+ h = end_y - begin_y;
+#if 0
+ /* multi-touch */
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MAJOR, max(w,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MINOR, min(x,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_X, 2*begin_x+w);
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_Y, 2*begin_y+h);
+ input_report_abs(usbtouch->input,
+ ABS_MT_ORIENTATION, w > h);
+ input_mt_sync(usbtouch->input);
+#endif
+ /* single touch */
+ usbtouch->x = 2 * begin_x + w;
+ usbtouch->y = 2 * begin_y + h;
+ usbtouch->touch = packet->flags & 0x01;
+ begin_y = end_y = -1;
+ return 1;
+ }
+ }
+ begin_x = end_x = -1;
+ }
+
+ }
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
* the different device descriptors
*/
#ifdef MULTI_PACKET
@@ -873,6 +1110,16 @@
.read_data = tc5uh_read_data,
},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ [DEVTYPE_NEXIO] = {
+ .rept_size = 128,
+ .irq_always = true,
+ .read_data = nexio_read_data,
+ .init = nexio_init,
+ .exit = nexio_exit,
+ },
+#endif
};
@@ -998,6 +1245,7 @@
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
+ case -EPIPE:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, urb->status);
@@ -1021,7 +1269,7 @@
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
- usbtouch->irq->dev = usbtouch->udev;
+ usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
if (!usbtouch->type->irq_always) {
if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
@@ -1048,13 +1296,23 @@
kfree(usbtouch->buffer);
}
+static struct usb_endpoint_descriptor *
+usbtouch_get_input_endpoint(struct usb_host_interface *interface)
+{
+ int i;
+
+ for (i = 0; i < interface->desc.bNumEndpoints; i++)
+ if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
+ return &interface->endpoint[i].desc;
+
+ return NULL;
+}
static int usbtouch_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usbtouch_usb *usbtouch;
struct input_dev *input_dev;
- struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
struct usbtouch_device_info *type;
@@ -1064,8 +1322,9 @@
if (id->driver_info == DEVTYPE_IGNORE)
return -ENODEV;
- interface = intf->cur_altsetting;
- endpoint = &interface->endpoint[0].desc;
+ endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
+ if (!endpoint)
+ return -ENXIO;
usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -1094,7 +1353,7 @@
goto out_free_buffers;
}
- usbtouch->udev = udev;
+ usbtouch->interface = intf;
usbtouch->input = input_dev;
if (udev->manufacturer)
@@ -1133,12 +1392,18 @@
input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
type->max_press, 0, 0);
- usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
+ if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
+ usb_fill_int_urb(usbtouch->irq, udev,
+ usb_rcvintpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
+ else
+ usb_fill_bulk_urb(usbtouch->irq, udev,
+ usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
+ usbtouch->data, type->rept_size,
+ usbtouch_irq, usbtouch);
- usbtouch->irq->dev = usbtouch->udev;
+ usbtouch->irq->dev = udev;
usbtouch->irq->transfer_dma = usbtouch->data_dma;
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1147,23 +1412,37 @@
err = type->init(usbtouch);
if (err) {
dbg("%s - type->init() failed, err: %d", __func__, err);
- goto out_free_buffers;
+ goto out_free_urb;
}
}
err = input_register_device(usbtouch->input);
if (err) {
dbg("%s - input_register_device failed, err: %d", __func__, err);
- goto out_free_buffers;
+ goto out_do_exit;
}
usb_set_intfdata(intf, usbtouch);
- if (usbtouch->type->irq_always)
- usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+ if (usbtouch->type->irq_always) {
+ err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+ if (err) {
+ err("%s - usb_submit_urb failed with result: %d",
+ __func__, err);
+ goto out_unregister_input;
+ }
+ }
return 0;
+out_unregister_input:
+ input_unregister_device(input_dev);
+ input_dev = NULL;
+out_do_exit:
+ if (type->exit)
+ type->exit(usbtouch);
+out_free_urb:
+ usb_free_urb(usbtouch->irq);
out_free_buffers:
usbtouch_free_buffers(udev, usbtouch);
out_free:
@@ -1186,6 +1465,8 @@
/* this will stop IO via close */
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
+ if (usbtouch->type->exit)
+ usbtouch->type->exit(usbtouch);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
kfree(usbtouch);
}
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index eca54db..0488498 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -118,6 +118,9 @@
if (pressure)
p = MODR;
+ dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+ x, y, p);
+
/* are samples valid */
if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
(y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index c721c0a..d30436f 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -321,7 +321,7 @@
}
}
-static struct xenbus_device_id xenkbd_ids[] = {
+static const struct xenbus_device_id xenkbd_ids[] = {
{ "vkbd" },
{ "" }
};
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d90683..fd85bde 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -171,8 +171,8 @@
If unsure, say Y.
config MAC_EMUMOUSEBTN
- bool "Support for mouse button 2+3 emulation"
- select INPUT
+ tristate "Support for mouse button 2+3 emulation"
+ depends on SYSCTL && INPUT
help
This provides generic support for emulating the 2nd and 3rd mouse
button with keypresses. If you say Y here, the emulation is still
@@ -184,6 +184,9 @@
If you have an Apple machine with a 1-button mouse, say Y here.
+ To compile this driver as a module, choose M here: the
+ module will be called mac_hid.
+
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 7b4ef5b..e943d2a 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -13,17 +13,197 @@
#include <linux/sysctl.h>
#include <linux/input.h>
#include <linux/module.h>
-#include <linux/kbd_kern.h>
+MODULE_LICENSE("GPL");
-static struct input_dev *emumousebtn;
-static int emumousebtn_input_register(void);
static int mouse_emulate_buttons;
static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */
static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */
-static int mouse_last_keycode;
-#if defined(CONFIG_SYSCTL)
+static struct input_dev *mac_hid_emumouse_dev;
+
+static int mac_hid_create_emumouse(void)
+{
+ static struct lock_class_key mac_hid_emumouse_dev_event_class;
+ static struct lock_class_key mac_hid_emumouse_dev_mutex_class;
+ int err;
+
+ mac_hid_emumouse_dev = input_allocate_device();
+ if (!mac_hid_emumouse_dev)
+ return -ENOMEM;
+
+ lockdep_set_class(&mac_hid_emumouse_dev->event_lock,
+ &mac_hid_emumouse_dev_event_class);
+ lockdep_set_class(&mac_hid_emumouse_dev->mutex,
+ &mac_hid_emumouse_dev_mutex_class);
+
+ mac_hid_emumouse_dev->name = "Macintosh mouse button emulation";
+ mac_hid_emumouse_dev->id.bustype = BUS_ADB;
+ mac_hid_emumouse_dev->id.vendor = 0x0001;
+ mac_hid_emumouse_dev->id.product = 0x0001;
+ mac_hid_emumouse_dev->id.version = 0x0100;
+
+ mac_hid_emumouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ mac_hid_emumouse_dev->keybit[BIT_WORD(BTN_MOUSE)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ mac_hid_emumouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+
+ err = input_register_device(mac_hid_emumouse_dev);
+ if (err) {
+ input_free_device(mac_hid_emumouse_dev);
+ mac_hid_emumouse_dev = NULL;
+ return err;
+ }
+
+ return 0;
+}
+
+static void mac_hid_destroy_emumouse(void)
+{
+ input_unregister_device(mac_hid_emumouse_dev);
+ mac_hid_emumouse_dev = NULL;
+}
+
+static bool mac_hid_emumouse_filter(struct input_handle *handle,
+ unsigned int type, unsigned int code,
+ int value)
+{
+ unsigned int btn;
+
+ if (type != EV_KEY)
+ return false;
+
+ if (code == mouse_button2_keycode)
+ btn = BTN_MIDDLE;
+ else if (code == mouse_button3_keycode)
+ btn = BTN_RIGHT;
+ else
+ return false;
+
+ input_report_key(mac_hid_emumouse_dev, btn, value);
+ input_sync(mac_hid_emumouse_dev);
+
+ return true;
+}
+
+static int mac_hid_emumouse_connect(struct input_handler *handler,
+ struct input_dev *dev,
+ const struct input_device_id *id)
+{
+ struct input_handle *handle;
+ int error;
+
+ /* Don't bind to ourselves */
+ if (dev == mac_hid_emumouse_dev)
+ return -ENODEV;
+
+ handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+ if (!handle)
+ return -ENOMEM;
+
+ handle->dev = dev;
+ handle->handler = handler;
+ handle->name = "mac-button-emul";
+
+ error = input_register_handle(handle);
+ if (error) {
+ printk(KERN_ERR
+ "mac_hid: Failed to register button emulation handle, "
+ "error %d\n", error);
+ goto err_free;
+ }
+
+ error = input_open_device(handle);
+ if (error) {
+ printk(KERN_ERR
+ "mac_hid: Failed to open input device, error %d\n",
+ error);
+ goto err_unregister;
+ }
+
+ return 0;
+
+ err_unregister:
+ input_unregister_handle(handle);
+ err_free:
+ kfree(handle);
+ return error;
+}
+
+static void mac_hid_emumouse_disconnect(struct input_handle *handle)
+{
+ input_close_device(handle);
+ input_unregister_handle(handle);
+ kfree(handle);
+}
+
+static const struct input_device_id mac_hid_emumouse_ids[] = {
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(input, mac_hid_emumouse_ids);
+
+static struct input_handler mac_hid_emumouse_handler = {
+ .filter = mac_hid_emumouse_filter,
+ .connect = mac_hid_emumouse_connect,
+ .disconnect = mac_hid_emumouse_disconnect,
+ .name = "mac-button-emul",
+ .id_table = mac_hid_emumouse_ids,
+};
+
+static int mac_hid_start_emulation(void)
+{
+ int err;
+
+ err = mac_hid_create_emumouse();
+ if (err)
+ return err;
+
+ err = input_register_handler(&mac_hid_emumouse_handler);
+ if (err) {
+ mac_hid_destroy_emumouse();
+ return err;
+ }
+
+ return 0;
+}
+
+static void mac_hid_stop_emulation(void)
+{
+ input_unregister_handler(&mac_hid_emumouse_handler);
+ mac_hid_destroy_emumouse();
+}
+
+static int mac_hid_toggle_emumouse(ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int *valp = table->data;
+ int old_val = *valp;
+ int rc;
+
+ rc = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (rc == 0 && write && *valp != old_val) {
+ if (*valp == 1)
+ rc = mac_hid_start_emulation();
+ else if (*valp == 0)
+ mac_hid_stop_emulation();
+ else
+ rc = -EINVAL;
+ }
+
+ /* Restore the old value in case of error */
+ if (rc)
+ *valp = old_val;
+
+ return rc;
+}
+
/* file(s) in /proc/sys/dev/mac_hid */
static ctl_table mac_hid_files[] = {
{
@@ -31,7 +211,7 @@
.data = &mouse_emulate_buttons,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = mac_hid_toggle_emumouse,
},
{
.procname = "mouse_button2_keycode",
@@ -74,75 +254,21 @@
static struct ctl_table_header *mac_hid_sysctl_header;
-#endif /* endif CONFIG_SYSCTL */
-
-int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down)
-{
- switch (caller) {
- case 1:
- /* Called from keyboard.c */
- if (mouse_emulate_buttons
- && (keycode == mouse_button2_keycode
- || keycode == mouse_button3_keycode)) {
- if (mouse_emulate_buttons == 1) {
- input_report_key(emumousebtn,
- keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT,
- down);
- input_sync(emumousebtn);
- return 1;
- }
- mouse_last_keycode = down ? keycode : 0;
- }
- break;
- }
- return 0;
-}
-
-static struct lock_class_key emumousebtn_event_class;
-static struct lock_class_key emumousebtn_mutex_class;
-
-static int emumousebtn_input_register(void)
-{
- int ret;
-
- emumousebtn = input_allocate_device();
- if (!emumousebtn)
- return -ENOMEM;
-
- lockdep_set_class(&emumousebtn->event_lock, &emumousebtn_event_class);
- lockdep_set_class(&emumousebtn->mutex, &emumousebtn_mutex_class);
-
- emumousebtn->name = "Macintosh mouse button emulation";
- emumousebtn->id.bustype = BUS_ADB;
- emumousebtn->id.vendor = 0x0001;
- emumousebtn->id.product = 0x0001;
- emumousebtn->id.version = 0x0100;
-
- emumousebtn->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- emumousebtn->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
- emumousebtn->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-
- ret = input_register_device(emumousebtn);
- if (ret)
- input_free_device(emumousebtn);
-
- return ret;
-}
-
static int __init mac_hid_init(void)
{
- int err;
-
- err = emumousebtn_input_register();
- if (err)
- return err;
-
-#if defined(CONFIG_SYSCTL)
mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir);
-#endif /* CONFIG_SYSCTL */
+ if (!mac_hid_sysctl_header)
+ return -ENOMEM;
return 0;
}
+module_init(mac_hid_init);
-device_initcall(mac_hid_init);
+static void __exit mac_hid_exit(void)
+{
+ unregister_sysctl_table(mac_hid_sysctl_header);
+
+ if (mouse_emulate_buttons)
+ mac_hid_stop_emulation();
+}
+module_exit(mac_hid_exit);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 00435bd..af2d39d 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -177,7 +177,7 @@
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
conf->array_sectors += rdev->sectors;
cnt++;
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 32a662f..4b323f4 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -308,7 +308,7 @@
*/
if (q->merge_bvec_fn &&
queue_max_sectors(q) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
conf->working_disks++;
mddev->degraded--;
@@ -478,7 +478,7 @@
* a merge_bvec_fn to be involved in multipath */
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
if (!test_bit(Faulty, &rdev->flags))
conf->working_disks++;
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 77605cd..a1f7147 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -182,7 +182,7 @@
if (rdev1->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
if (!smallest || (rdev1->sectors < smallest->sectors))
smallest = rdev1;
@@ -325,7 +325,7 @@
}
if (md_check_no_bitmap(mddev))
return -EINVAL;
- blk_queue_max_sectors(mddev->queue, mddev->chunk_sectors);
+ blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
mddev->queue->queue_lock = &mddev->queue->__queue_lock;
ret = create_strip_zones(mddev);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 859bd3f..5a06122 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1158,7 +1158,7 @@
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
p->head_position = 0;
rdev->raid_disk = mirror;
@@ -2103,7 +2103,7 @@
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
}
mddev->degraded = 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d119b7b..7584f9a 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1161,7 +1161,7 @@
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
p->head_position = 0;
rdev->raid_disk = mirror;
@@ -2260,7 +2260,7 @@
*/
if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9))
- blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9);
+ blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9);
disk->head_position = 0;
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index ceb24af..509c8f3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3739,7 +3739,7 @@
if ((bi->bi_size>>9) > queue_max_sectors(q))
return 0;
blk_recount_segments(q, bi);
- if (bi->bi_phys_segments > queue_max_phys_segments(q))
+ if (bi->bi_phys_segments > queue_max_segments(q))
return 0;
if (q->merge_bvec_fn)
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index bd83fa0a..972b870 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -1226,9 +1226,8 @@
blk_queue_prep_rq(msb->queue, mspro_block_prepare_req);
blk_queue_bounce_limit(msb->queue, limit);
- blk_queue_max_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES);
- blk_queue_max_phys_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS);
- blk_queue_max_hw_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS);
+ blk_queue_max_hw_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES);
+ blk_queue_max_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS);
blk_queue_max_segment_size(msb->queue,
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index e39986a..2658b14 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -1065,9 +1065,8 @@
queue = gd->queue;
queue->queuedata = i2o_blk_dev;
- blk_queue_max_phys_segments(queue, I2O_MAX_PHYS_SEGMENTS);
- blk_queue_max_sectors(queue, max_sectors);
- blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size));
+ blk_queue_max_hw_sectors(queue, max_sectors);
+ blk_queue_max_segments(queue, i2o_sg_tablesize(c, body_size));
osm_debug("max sectors = %d\n", queue->max_sectors);
osm_debug("phys segments = %d\n", queue->max_phys_segments);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 413576a..b670d10 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -94,7 +94,7 @@
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
- depends on I2C=y && ARCH_OMAP24XX
+ depends on I2C=y && ARCH_OMAP2
help
If you say yes here you get support for the Texas Instruments
TWL92330/Menelaus Power Management chip. This include voltage
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 2a76065..19a930d 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -115,7 +115,8 @@
#define twl_has_watchdog() false
#endif
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+ defined(CONFIG_SND_SOC_TWL6030) || defined(CONFIG_SND_SOC_TWL6030_MODULE)
#define twl_has_codec() true
#else
#define twl_has_codec() false
@@ -711,8 +712,19 @@
return PTR_ERR(child);
}
- if (twl_has_codec() && pdata->codec) {
- child = add_child(1, "twl4030_codec",
+ if (twl_has_codec() && pdata->codec && twl_class_is_4030()) {
+ sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+ child = add_child(sub_chip_id, "twl4030_codec",
+ pdata->codec, sizeof(*pdata->codec),
+ false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ /* Phoenix*/
+ if (twl_has_codec() && pdata->codec && twl_class_is_6030()) {
+ sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+ child = add_child(sub_chip_id, "twl6030_codec",
pdata->codec, sizeof(*pdata->codec),
false, 0, 0);
if (IS_ERR(child))
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index c5a7a85..381fe03 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -154,9 +154,8 @@
if (mq->bounce_buf) {
blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
- blk_queue_max_sectors(mq->queue, bouncesz / 512);
- blk_queue_max_phys_segments(mq->queue, bouncesz / 512);
- blk_queue_max_hw_segments(mq->queue, bouncesz / 512);
+ blk_queue_max_hw_sectors(mq->queue, bouncesz / 512);
+ blk_queue_max_segments(mq->queue, bouncesz / 512);
blk_queue_max_segment_size(mq->queue, bouncesz);
mq->sg = kmalloc(sizeof(struct scatterlist),
@@ -180,10 +179,9 @@
if (!mq->bounce_buf) {
blk_queue_bounce_limit(mq->queue, limit);
- blk_queue_max_sectors(mq->queue,
+ blk_queue_max_hw_sectors(mq->queue,
min(host->max_blk_count, host->max_req_size / 512));
- blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
- blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
+ blk_queue_max_segments(mq->queue, host->max_hw_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
mq->sg = kmalloc(sizeof(struct scatterlist) *
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 90d168a..84c103a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2,6 +2,7 @@
* linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
*
* Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ * Copyright (C) 2010 ST-Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -34,9 +35,6 @@
#define DRIVER_NAME "mmci-pl18x"
-#define DBG(host,fmt,args...) \
- pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-
static unsigned int fmax = 515633;
/*
@@ -105,8 +103,8 @@
void __iomem *base;
int blksz_bits;
- DBG(host, "blksz %04x blks %04x flags %08x\n",
- data->blksz, data->blocks, data->flags);
+ dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
+ data->blksz, data->blocks, data->flags);
host->data = data;
host->size = data->blksz;
@@ -155,7 +153,7 @@
{
void __iomem *base = host->base;
- DBG(host, "op %02x arg %08x flags %08x\n",
+ dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
@@ -184,8 +182,20 @@
{
if (status & MCI_DATABLOCKEND) {
host->data_xfered += data->blksz;
+#ifdef CONFIG_ARCH_U300
+ /*
+ * On the U300 some signal or other is
+ * badly routed so that a data write does
+ * not properly terminate with a MCI_DATAEND
+ * status flag. This quirk will make writes
+ * work again.
+ */
+ if (data->flags & MMC_DATA_WRITE)
+ status |= MCI_DATAEND;
+#endif
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
if (status & MCI_DATACRCFAIL)
data->error = -EILSEQ;
else if (status & MCI_DATATIMEOUT)
@@ -307,7 +317,7 @@
status = readl(base + MMCISTATUS);
- DBG(host, "irq1 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
do {
unsigned long flags;
@@ -401,7 +411,7 @@
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
- DBG(host, "irq0 %08x\n", status);
+ dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
@@ -428,8 +438,8 @@
WARN_ON(host->mrq != NULL);
if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
- mmc_hostname(mmc), mrq->data->blksz);
+ dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
+ mrq->data->blksz);
mrq->cmd->error = -EINVAL;
mmc_request_done(mmc, mrq);
return;
@@ -582,8 +592,8 @@
host->hw_designer = amba_manf(dev);
host->hw_revision = amba_rev(dev);
- DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
- DBG(host, "revision = 0x%01x\n", host->hw_revision);
+ dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
+ dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
@@ -608,7 +618,8 @@
if (ret < 0)
goto clk_disable;
host->mclk = clk_get_rate(host->clk);
- DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n",
+ host->mclk);
}
host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
@@ -619,6 +630,8 @@
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
+ dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
@@ -712,7 +725,7 @@
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
+ dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4b23225..83f0aff 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -30,6 +30,8 @@
#include <linux/mmc/core.h>
#include <linux/io.h>
#include <linux/semaphore.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include <plat/dma.h>
#include <mach/hardware.h>
#include <plat/board.h>
@@ -146,6 +148,15 @@
struct clk *fclk;
struct clk *iclk;
struct clk *dbclk;
+ /*
+ * vcc == configured supply
+ * vcc_aux == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
struct semaphore sem;
struct work_struct mmc_carddetect_work;
void __iomem *base;
@@ -171,10 +182,337 @@
int vdd;
int protect_card;
int reqs_blocked;
+ int use_reg;
struct omap_mmc_platform_data *pdata;
};
+static int omap_hsmmc_card_detect(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
+static int omap_hsmmc_get_wp(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ /* NOTE: assumes write protect signal is active-high */
+ return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+}
+
+static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
+#ifdef CONFIG_PM
+
+static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ disable_irq(mmc->slots[0].card_detect_irq);
+ return 0;
+}
+
+static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ enable_irq(mmc->slots[0].card_detect_irq);
+ return 0;
+}
+
+#else
+
+#define omap_hsmmc_suspend_cdirq NULL
+#define omap_hsmmc_resume_cdirq NULL
+
+#endif
+
+#ifdef CONFIG_REGULATOR
+
+static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int ret;
+
+ if (mmc_slot(host).before_set_reg)
+ mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+
+ if (power_on)
+ ret = mmc_regulator_set_ocr(host->vcc, vdd);
+ else
+ ret = mmc_regulator_set_ocr(host->vcc, 0);
+
+ if (mmc_slot(host).after_set_reg)
+ mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+
+ return ret;
+}
+
+static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int ret = 0;
+
+ /*
+ * If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!host->vcc)
+ return 0;
+
+ if (mmc_slot(host).before_set_reg)
+ mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+
+ /*
+ * Assume Vcc regulator is used only to power the card ... OMAP
+ * VDDS is used to power the pins, optionally with a transceiver to
+ * support cards using voltages other than VDDS (1.8V nominal). When a
+ * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
+ */
+ if (power_on) {
+ ret = mmc_regulator_set_ocr(host->vcc, vdd);
+ /* Enable interface voltage rail, if needed */
+ if (ret == 0 && host->vcc_aux) {
+ ret = regulator_enable(host->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(host->vcc, 0);
+ }
+ } else {
+ if (host->vcc_aux)
+ ret = regulator_disable(host->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(host->vcc, 0);
+ }
+
+ if (mmc_slot(host).after_set_reg)
+ mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+
+ return ret;
+}
+
+static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
+ int vdd, int cardsleep)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+ return regulator_set_mode(host->vcc, mode);
+}
+
+static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
+ int vdd, int cardsleep)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int err, mode;
+
+ /*
+ * If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!host->vcc)
+ return 0;
+
+ mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+ if (!host->vcc_aux)
+ return regulator_set_mode(host->vcc, mode);
+
+ if (cardsleep) {
+ /* VCC can be turned off if card is asleep */
+ if (sleep)
+ err = mmc_regulator_set_ocr(host->vcc, 0);
+ else
+ err = mmc_regulator_set_ocr(host->vcc, vdd);
+ } else
+ err = regulator_set_mode(host->vcc, mode);
+ if (err)
+ return err;
+
+ if (!mmc_slot(host).vcc_aux_disable_is_sleep)
+ return regulator_set_mode(host->vcc_aux, mode);
+
+ if (sleep)
+ return regulator_disable(host->vcc_aux);
+ else
+ return regulator_enable(host->vcc_aux);
+}
+
+static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
+{
+ struct regulator *reg;
+ int ret = 0;
+
+ switch (host->id) {
+ case OMAP_MMC1_DEVID:
+ /* On-chip level shifting via PBIAS0/PBIAS1 */
+ mmc_slot(host).set_power = omap_hsmmc_1_set_power;
+ mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep;
+ break;
+ case OMAP_MMC2_DEVID:
+ case OMAP_MMC3_DEVID:
+ /* Off-chip level shifting, or none */
+ mmc_slot(host).set_power = omap_hsmmc_23_set_power;
+ mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep;
+ break;
+ default:
+ pr_err("MMC%d configuration not supported!\n", host->id);
+ return -EINVAL;
+ }
+
+ reg = regulator_get(host->dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(host->dev, "vmmc regulator missing\n");
+ /*
+ * HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (host->id == OMAP_MMC1_DEVID) {
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ } else {
+ host->vcc = reg;
+ mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* Allow an aux regulator */
+ reg = regulator_get(host->dev, "vmmc_aux");
+ host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /*
+ * UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(host->vcc) > 0) {
+ regulator_enable(host->vcc);
+ regulator_disable(host->vcc);
+ }
+ if (host->vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+ }
+
+ return 0;
+
+err:
+ mmc_slot(host).set_power = NULL;
+ mmc_slot(host).set_sleep = NULL;
+ return ret;
+}
+
+static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
+{
+ regulator_put(host->vcc);
+ regulator_put(host->vcc_aux);
+ mmc_slot(host).set_power = NULL;
+ mmc_slot(host).set_sleep = NULL;
+}
+
+static inline int omap_hsmmc_have_reg(void)
+{
+ return 1;
+}
+
+#else
+
+static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
+{
+ return -EINVAL;
+}
+
+static inline void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
+{
+}
+
+static inline int omap_hsmmc_have_reg(void)
+{
+ return 0;
+}
+
+#endif
+
+static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
+{
+ int ret;
+
+ if (gpio_is_valid(pdata->slots[0].switch_pin)) {
+ pdata->suspend = omap_hsmmc_suspend_cdirq;
+ pdata->resume = omap_hsmmc_resume_cdirq;
+ if (pdata->slots[0].cover)
+ pdata->slots[0].get_cover_state =
+ omap_hsmmc_get_cover_state;
+ else
+ pdata->slots[0].card_detect = omap_hsmmc_card_detect;
+ pdata->slots[0].card_detect_irq =
+ gpio_to_irq(pdata->slots[0].switch_pin);
+ ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(pdata->slots[0].switch_pin);
+ if (ret)
+ goto err_free_sp;
+ } else
+ pdata->slots[0].switch_pin = -EINVAL;
+
+ if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
+ pdata->slots[0].get_ro = omap_hsmmc_get_wp;
+ ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
+ if (ret)
+ goto err_free_cd;
+ ret = gpio_direction_input(pdata->slots[0].gpio_wp);
+ if (ret)
+ goto err_free_wp;
+ } else
+ pdata->slots[0].gpio_wp = -EINVAL;
+
+ return 0;
+
+err_free_wp:
+ gpio_free(pdata->slots[0].gpio_wp);
+err_free_cd:
+ if (gpio_is_valid(pdata->slots[0].switch_pin))
+err_free_sp:
+ gpio_free(pdata->slots[0].switch_pin);
+ return ret;
+}
+
+static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
+{
+ if (gpio_is_valid(pdata->slots[0].gpio_wp))
+ gpio_free(pdata->slots[0].gpio_wp);
+ if (gpio_is_valid(pdata->slots[0].switch_pin))
+ gpio_free(pdata->slots[0].switch_pin);
+}
+
/*
* Stop clock to the card
*/
@@ -835,7 +1173,7 @@
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
if (slot->card_detect)
- carddetect = slot->card_detect(slot->card_detect_irq);
+ carddetect = slot->card_detect(host->dev, host->slot_id);
else {
omap_hsmmc_protect_card(host);
carddetect = -ENOSYS;
@@ -1242,7 +1580,7 @@
if (!mmc_slot(host).card_detect)
return -ENOSYS;
- return mmc_slot(host).card_detect(mmc_slot(host).card_detect_irq);
+ return mmc_slot(host).card_detect(host->dev, host->slot_id);
}
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
@@ -1311,7 +1649,7 @@
if (host->power_mode == MMC_POWER_OFF)
return 0;
- return msecs_to_jiffies(OMAP_MMC_SLEEP_TIMEOUT);
+ return OMAP_MMC_SLEEP_TIMEOUT;
}
/* Handler for [DISABLED -> REGSLEEP / CARDSLEEP] transition */
@@ -1347,11 +1685,14 @@
dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n",
host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
+ if (mmc_slot(host).no_off)
+ return 0;
+
if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
mmc_slot(host).card_detect ||
(mmc_slot(host).get_cover_state &&
mmc_slot(host).get_cover_state(host->dev, host->slot_id)))
- return msecs_to_jiffies(OMAP_MMC_OFF_TIMEOUT);
+ return OMAP_MMC_OFF_TIMEOUT;
return 0;
}
@@ -1362,6 +1703,9 @@
if (!mmc_try_claim_host(host->mmc))
return 0;
+ if (mmc_slot(host).no_off)
+ return 0;
+
if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
mmc_slot(host).card_detect ||
(mmc_slot(host).get_cover_state &&
@@ -1616,7 +1960,7 @@
struct mmc_host *mmc;
struct omap_hsmmc_host *host = NULL;
struct resource *res;
- int ret = 0, irq;
+ int ret, irq;
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform Data is missing\n");
@@ -1638,10 +1982,14 @@
if (res == NULL)
return -EBUSY;
+ ret = omap_hsmmc_gpio_init(pdata);
+ if (ret)
+ goto err;
+
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
- goto err;
+ goto err_alloc;
}
host = mmc_priv(mmc);
@@ -1656,7 +2004,7 @@
host->slot_id = 0;
host->mapbase = res->start;
host->base = ioremap(host->mapbase, SZ_4K);
- host->power_mode = -1;
+ host->power_mode = MMC_POWER_OFF;
platform_set_drvdata(pdev, host);
INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect);
@@ -1666,6 +2014,13 @@
else
mmc->ops = &omap_hsmmc_ops;
+ /*
+ * If regulator_disable can only put vcc_aux to sleep then there is
+ * no off state.
+ */
+ if (mmc_slot(host).vcc_aux_disable_is_sleep)
+ mmc_slot(host).no_off = 1;
+
mmc->f_min = 400000;
mmc->f_max = 52000000;
@@ -1781,7 +2136,6 @@
goto err_irq;
}
- /* initialize power supplies, gpios, etc */
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
dev_dbg(mmc_dev(host->mmc),
@@ -1789,6 +2143,14 @@
goto err_irq_cd_init;
}
}
+
+ if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
+ ret = omap_hsmmc_reg_get(host);
+ if (ret)
+ goto err_reg;
+ host->use_reg = 1;
+ }
+
mmc->ocr_avail = mmc_slot(host).ocr_mask;
/* Request IRQ for card detect */
@@ -1823,19 +2185,22 @@
ret = device_create_file(&mmc->class_dev,
&dev_attr_cover_switch);
if (ret < 0)
- goto err_cover_switch;
+ goto err_slot_name;
}
omap_hsmmc_debugfs(mmc);
return 0;
-err_cover_switch:
- device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
err_slot_name:
mmc_remove_host(mmc);
-err_irq_cd:
free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd:
+ if (host->use_reg)
+ omap_hsmmc_reg_put(host);
+err_reg:
+ if (host->pdata->cleanup)
+ host->pdata->cleanup(&pdev->dev);
err_irq_cd_init:
free_irq(host->irq, host);
err_irq:
@@ -1847,14 +2212,14 @@
clk_disable(host->dbclk);
clk_put(host->dbclk);
}
-
err1:
iounmap(host->base);
+ platform_set_drvdata(pdev, NULL);
+ mmc_free_host(mmc);
+err_alloc:
+ omap_hsmmc_gpio_free(pdata);
err:
- dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
release_mem_region(res->start, res->end - res->start + 1);
- if (host)
- mmc_free_host(mmc);
return ret;
}
@@ -1866,6 +2231,8 @@
if (host) {
mmc_host_enable(host->mmc);
mmc_remove_host(host->mmc);
+ if (host->use_reg)
+ omap_hsmmc_reg_put(host);
if (host->pdata->cleanup)
host->pdata->cleanup(&pdev->dev);
free_irq(host->irq, host);
@@ -1884,6 +2251,7 @@
mmc_free_host(host->mmc);
iounmap(host->base);
+ omap_hsmmc_gpio_free(pdev->dev.platform_data);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2bb03a8..aa2807d 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -422,15 +422,6 @@
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
-config MTD_OMAP_NOR
- tristate "TI OMAP board mappings"
- depends on MTD_CFI && ARCH_OMAP
- help
- This enables access to the NOR flash chips on TI OMAP-based
- boards defining flash platform devices and flash platform data.
- These boards include the Innovator, H2, H3, OSK, Perseus2, and
- more. If you have such a board, say 'Y'.
-
# This needs CFI or JEDEC, depending on the cards found.
config MTD_PCI
tristate "PCI MTD driver"
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a44919f..bb035cd 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -54,7 +54,6 @@
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
-obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index ead0b2f..e69de29 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -1,188 +0,0 @@
-/*
- * Flash memory support for various TI OMAP boards
- *
- * Copyright (C) 2001-2002 MontaVista Software Inc.
- * Copyright (C) 2003-2004 Texas Instruments
- * Copyright (C) 2004 Nokia Corporation
- *
- * Assembled using driver code copyright the companies above
- * and written by David Brownell, Jian Zhang <jzhang@ti.com>,
- * Tony Lindgren <tony@atomide.com> and others.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/mach/flash.h>
-#include <plat/tc.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
-#endif
-
-struct omapflash_info {
- struct mtd_partition *parts;
- struct mtd_info *mtd;
- struct map_info map;
-};
-
-static void omap_set_vpp(struct map_info *map, int enable)
-{
- static int count;
- u32 l;
-
- if (cpu_class_is_omap1()) {
- if (enable) {
- if (count++ == 0) {
- l = omap_readl(EMIFS_CONFIG);
- l |= OMAP_EMIFS_CONFIG_WP;
- omap_writel(l, EMIFS_CONFIG);
- }
- } else {
- if (count && (--count == 0)) {
- l = omap_readl(EMIFS_CONFIG);
- l &= ~OMAP_EMIFS_CONFIG_WP;
- omap_writel(l, EMIFS_CONFIG);
- }
- }
- }
-}
-
-static int __init omapflash_probe(struct platform_device *pdev)
-{
- int err;
- struct omapflash_info *info;
- struct flash_platform_data *pdata = pdev->dev.platform_data;
- struct resource *res = pdev->resource;
- unsigned long size = res->end - res->start + 1;
-
- info = kzalloc(sizeof(struct omapflash_info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- if (!request_mem_region(res->start, size, "flash")) {
- err = -EBUSY;
- goto out_free_info;
- }
-
- info->map.virt = ioremap(res->start, size);
- if (!info->map.virt) {
- err = -ENOMEM;
- goto out_release_mem_region;
- }
- info->map.name = dev_name(&pdev->dev);
- info->map.phys = res->start;
- info->map.size = size;
- info->map.bankwidth = pdata->width;
- info->map.set_vpp = omap_set_vpp;
-
- simple_map_init(&info->map);
- info->mtd = do_map_probe(pdata->map_name, &info->map);
- if (!info->mtd) {
- err = -EIO;
- goto out_iounmap;
- }
- info->mtd->owner = THIS_MODULE;
-
- info->mtd->dev.parent = &pdev->dev;
-
-#ifdef CONFIG_MTD_PARTITIONS
- err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- add_mtd_partitions(info->mtd, info->parts, err);
- else if (err <= 0 && pdata->parts)
- add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
- else
-#endif
- add_mtd_device(info->mtd);
-
- platform_set_drvdata(pdev, info);
-
- return 0;
-
-out_iounmap:
- iounmap(info->map.virt);
-out_release_mem_region:
- release_mem_region(res->start, size);
-out_free_info:
- kfree(info);
-
- return err;
-}
-
-static int __exit omapflash_remove(struct platform_device *pdev)
-{
- struct omapflash_info *info = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
-
- if (info) {
- if (info->parts) {
- del_mtd_partitions(info->mtd);
- kfree(info->parts);
- } else
- del_mtd_device(info->mtd);
- map_destroy(info->mtd);
- release_mem_region(info->map.phys, info->map.size);
- iounmap((void __iomem *) info->map.virt);
- kfree(info);
- }
-
- return 0;
-}
-
-static struct platform_driver omapflash_driver = {
- .remove = __exit_p(omapflash_remove),
- .driver = {
- .name = "omapflash",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init omapflash_init(void)
-{
- return platform_driver_probe(&omapflash_driver, omapflash_probe);
-}
-
-static void __exit omapflash_exit(void)
-{
- platform_driver_unregister(&omapflash_driver);
-}
-
-module_init(omapflash_init);
-module_exit(omapflash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards");
-MODULE_ALIAS("platform:omapflash");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 1bb799f..26aec008 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -30,12 +30,8 @@
#define DRIVER_NAME "omap2-nand"
-/* size (4 KiB) for IO mapping */
-#define NAND_IO_SIZE SZ_4K
-
#define NAND_WP_OFF 0
#define NAND_WP_BIT 0x00000010
-#define WR_RD_PIN_MONITORING 0x00600000
#define GPMC_BUF_FULL 0x00000001
#define GPMC_BUF_EMPTY 0x00000000
@@ -882,8 +878,6 @@
struct omap_nand_info *info;
struct omap_nand_platform_data *pdata;
int err;
- unsigned long val;
-
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -905,28 +899,14 @@
info->gpmc_cs = pdata->cs;
info->gpmc_baseaddr = pdata->gpmc_baseaddr;
info->gpmc_cs_baseaddr = pdata->gpmc_cs_baseaddr;
+ info->phys_base = pdata->phys_base;
info->mtd.priv = &info->nand;
info->mtd.name = dev_name(&pdev->dev);
info->mtd.owner = THIS_MODULE;
- err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base);
- if (err < 0) {
- dev_err(&pdev->dev, "Cannot request GPMC CS\n");
- goto out_free_info;
- }
-
- /* Enable RD PIN Monitoring Reg */
- if (pdata->dev_ready) {
- val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
- val |= WR_RD_PIN_MONITORING;
- gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
- }
-
- val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
- val &= ~(0xf << 8);
- val |= (0xc & 0xf) << 8;
- gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+ info->nand.options |= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
+ info->nand.options |= NAND_SKIP_BBTSCAN;
/* NAND write protect off */
omap_nand_wp(&info->mtd, NAND_WP_OFF);
@@ -934,7 +914,7 @@
if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
pdev->dev.driver->name)) {
err = -EBUSY;
- goto out_free_cs;
+ goto out_free_info;
}
info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
@@ -963,11 +943,6 @@
info->nand.chip_delay = 50;
}
- info->nand.options |= NAND_SKIP_BBTSCAN;
- if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
- == 0x1000)
- info->nand.options |= NAND_BUSWIDTH_16;
-
if (use_prefetch) {
/* copy the virtual address of nand base for fifo access */
info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
@@ -1043,8 +1018,6 @@
out_release_mem_region:
release_mem_region(info->phys_base, NAND_IO_SIZE);
-out_free_cs:
- gpmc_cs_free(info->gpmc_cs);
out_free_info:
kfree(info);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 46af867..7029cd5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -932,7 +932,7 @@
config TI_DAVINCI_EMAC
tristate "TI DaVinci EMAC Support"
- depends on ARM && ARCH_DAVINCI
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
select PHYLIB
help
This driver supports TI's DaVinci Ethernet .
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 5ffb149..2d4a4b8 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -114,8 +114,7 @@
#define IMG_TYPE_ISCSI_BACKUP 9
#define IMG_TYPE_FCOE_FW_ACTIVE 10
#define IMG_TYPE_FCOE_FW_BACKUP 11
-#define IMG_TYPE_NCSI_BITFILE 13
-#define IMG_TYPE_NCSI_8051 14
+#define IMG_TYPE_NCSI_FW 13
#define FLASHROM_OPER_FLASH 1
#define FLASHROM_OPER_SAVE 2
@@ -127,6 +126,7 @@
#define FLASH_IMAGE_MAX_SIZE_g3 (2097152) /* Max fw image size */
#define FLASH_BIOS_IMAGE_MAX_SIZE_g3 (524288) /* Max OPTION ROM img sz */
#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3 (1048576) /* Max Redboot image sz */
+#define FLASH_NCSI_IMAGE_MAX_SIZE_g3 (262144) /* Max NSCI image sz */
#define FLASH_NCSI_MAGIC (0x16032009)
#define FLASH_NCSI_DISABLED (0)
@@ -144,6 +144,7 @@
#define FLASH_FCoE_BIOS_START_g2 (524288)
#define FLASH_REDBOOT_START_g2 (0)
+#define FLASH_NCSI_START_g3 (15990784)
#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
#define FLASH_iSCSI_BACKUP_IMAGE_START_g3 (4194304)
#define FLASH_FCoE_PRIMARY_IMAGE_START_g3 (6291456)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a703ed8..22f787f 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1880,8 +1880,9 @@
const u8 *p = fw->data;
struct be_cmd_write_flashrom *req = flash_cmd->va;
struct flash_comp *pflashcomp;
+ int num_comp;
- struct flash_comp gen3_flash_types[8] = {
+ struct flash_comp gen3_flash_types[9] = {
{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
FLASH_IMAGE_MAX_SIZE_g3},
{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -1897,7 +1898,9 @@
{ FLASH_FCoE_PRIMARY_IMAGE_START_g3, IMG_TYPE_FCOE_FW_ACTIVE,
FLASH_IMAGE_MAX_SIZE_g3},
{ FLASH_FCoE_BACKUP_IMAGE_START_g3, IMG_TYPE_FCOE_FW_BACKUP,
- FLASH_IMAGE_MAX_SIZE_g3}
+ FLASH_IMAGE_MAX_SIZE_g3},
+ { FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
+ FLASH_NCSI_IMAGE_MAX_SIZE_g3}
};
struct flash_comp gen2_flash_types[8] = {
{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
@@ -1921,11 +1924,16 @@
if (adapter->generation == BE_GEN3) {
pflashcomp = gen3_flash_types;
filehdr_size = sizeof(struct flash_file_hdr_g3);
+ num_comp = 9;
} else {
pflashcomp = gen2_flash_types;
filehdr_size = sizeof(struct flash_file_hdr_g2);
+ num_comp = 8;
}
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < num_comp; i++) {
+ if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
+ memcmp(adapter->fw_ver, "3.102.148.0", 11) < 0)
+ continue;
if ((pflashcomp[i].optype == IMG_TYPE_REDBOOT) &&
(!be_flash_redboot(adapter, fw->data,
pflashcomp[i].offset, pflashcomp[i].size,
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7cbcfb0..9bd155e 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5072,7 +5072,7 @@
INIT_WORK(&cp->reset_task, cas_reset_task);
/* Default link parameters */
- if (link_mode >= 0 && link_mode <= 6)
+ if (link_mode >= 0 && link_mode < 6)
cp->link_cntl = link_modes[link_mode];
else
cp->link_cntl = BMCR_ANENABLE;
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index b85c81f..9d48942 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1290,8 +1290,8 @@
{
platform_driver_unregister(&cpmac_driver);
mdiobus_unregister(cpmac_mii);
- mdiobus_free(cpmac_mii);
iounmap(cpmac_mii->priv);
+ mdiobus_free(cpmac_mii);
}
module_init(cpmac_init);
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 3f5db83..32960b9 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -62,12 +62,11 @@
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/davinci_emac.h>
#include <asm/irq.h>
#include <asm/page.h>
-#include <mach/emac.h>
-
static int debug_level;
module_param(debug_level, int, 0);
MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
@@ -465,6 +464,7 @@
void __iomem *ctrl_base;
void __iomem *emac_ctrl_ram;
u32 ctrl_ram_size;
+ u32 hw_ram_addr;
struct emac_txch *txch[EMAC_DEF_MAX_TX_CH];
struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH];
u32 link; /* 1=link on, 0=link off */
@@ -488,6 +488,9 @@
struct mii_bus *mii_bus;
struct phy_device *phydev;
spinlock_t lock;
+ /*platform specific members*/
+ void (*int_enable) (void);
+ void (*int_disable) (void);
};
/* clock frequency for EMAC */
@@ -495,11 +498,9 @@
static unsigned long emac_bus_frequency;
static unsigned long mdio_max_freq;
-/* EMAC internal utility function */
-static inline u32 emac_virt_to_phys(void __iomem *addr)
-{
- return (u32 __force) io_v2p(addr);
-}
+#define emac_virt_to_phys(addr, priv) \
+ (((u32 __force)(addr) - (u32 __force)(priv->emac_ctrl_ram)) \
+ + priv->hw_ram_addr)
/* Cache macros - Packet buffers would be from skb pool which is cached */
#define EMAC_VIRT_NOCACHE(addr) (addr)
@@ -1001,6 +1002,8 @@
emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
/* NOTE: Rx Threshold and Misc interrupts are not disabled */
+ if (priv->int_disable)
+ priv->int_disable();
local_irq_restore(flags);
@@ -1020,6 +1023,9 @@
static void emac_int_enable(struct emac_priv *priv)
{
if (priv->version == EMAC_VERSION_2) {
+ if (priv->int_enable)
+ priv->int_enable();
+
emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
@@ -1301,7 +1307,7 @@
curr_bd = txch->active_queue_head;
if (NULL == curr_bd) {
emac_write(EMAC_TXCP(ch),
- emac_virt_to_phys(txch->last_hw_bdprocessed));
+ emac_virt_to_phys(txch->last_hw_bdprocessed, priv));
txch->no_active_pkts++;
spin_unlock_irqrestore(&priv->tx_lock, flags);
return 0;
@@ -1311,7 +1317,7 @@
while ((curr_bd) &&
((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
(pkts_processed < budget)) {
- emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd));
+ emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd, priv));
txch->active_queue_head = curr_bd->next;
if (frame_status & EMAC_CPPI_EOQ_BIT) {
if (curr_bd->next) { /* misqueued packet */
@@ -1398,7 +1404,7 @@
txch->active_queue_tail = curr_bd;
if (1 != txch->queue_active) {
emac_write(EMAC_TXHDP(ch),
- emac_virt_to_phys(curr_bd));
+ emac_virt_to_phys(curr_bd, priv));
txch->queue_active = 1;
}
++txch->queue_reinit;
@@ -1410,10 +1416,11 @@
tail_bd->next = curr_bd;
txch->active_queue_tail = curr_bd;
tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
- tail_bd->h_next = (int)emac_virt_to_phys(curr_bd);
+ tail_bd->h_next = (int)emac_virt_to_phys(curr_bd, priv);
frame_status = tail_bd->mode;
if (frame_status & EMAC_CPPI_EOQ_BIT) {
- emac_write(EMAC_TXHDP(ch), emac_virt_to_phys(curr_bd));
+ emac_write(EMAC_TXHDP(ch),
+ emac_virt_to_phys(curr_bd, priv));
frame_status &= ~(EMAC_CPPI_EOQ_BIT);
tail_bd->mode = frame_status;
++txch->end_of_queue_add;
@@ -1603,7 +1610,8 @@
}
/* populate the hardware descriptor */
- curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head);
+ curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head,
+ priv);
/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr);
curr_bd->off_b_len = rxch->buf_size;
@@ -1878,7 +1886,7 @@
rxch->active_queue_tail = curr_bd;
if (0 != rxch->queue_active) {
emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(rxch->active_queue_head));
+ emac_virt_to_phys(rxch->active_queue_head, priv));
rxch->queue_active = 1;
}
} else {
@@ -1889,11 +1897,11 @@
rxch->active_queue_tail = curr_bd;
tail_bd->next = curr_bd;
tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
- tail_bd->h_next = emac_virt_to_phys(curr_bd);
+ tail_bd->h_next = emac_virt_to_phys(curr_bd, priv);
frame_status = tail_bd->mode;
if (frame_status & EMAC_CPPI_EOQ_BIT) {
emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(curr_bd));
+ emac_virt_to_phys(curr_bd, priv));
frame_status &= ~(EMAC_CPPI_EOQ_BIT);
tail_bd->mode = frame_status;
++rxch->end_of_queue_add;
@@ -1986,7 +1994,7 @@
curr_pkt->num_bufs = 1;
curr_pkt->pkt_length =
(frame_status & EMAC_RX_BD_PKT_LENGTH_MASK);
- emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd));
+ emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd, priv));
++rxch->processed_bd;
last_bd = curr_bd;
curr_bd = last_bd->next;
@@ -1997,7 +2005,7 @@
if (curr_bd) {
++rxch->mis_queued_packets;
emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(curr_bd));
+ emac_virt_to_phys(curr_bd, priv));
} else {
++rxch->end_of_queue;
rxch->queue_active = 0;
@@ -2098,7 +2106,7 @@
emac_write(EMAC_RXINTMASKSET, BIT(ch));
rxch->queue_active = 1;
emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(rxch->active_queue_head));
+ emac_virt_to_phys(rxch->active_queue_head, priv));
}
/* Enable MII */
@@ -2377,7 +2385,7 @@
struct emac_priv *priv = netdev_priv(ndev);
netif_carrier_off(ndev);
- for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+ for (cnt = 0; cnt < ETH_ALEN; cnt++)
ndev->dev_addr[cnt] = priv->mac_addr[cnt];
/* Configuration items */
@@ -2659,6 +2667,9 @@
priv->phy_mask = pdata->phy_mask;
priv->rmii_en = pdata->rmii_en;
priv->version = pdata->version;
+ priv->int_enable = pdata->interrupt_enable;
+ priv->int_disable = pdata->interrupt_disable;
+
emac_dev = &ndev->dev;
/* Get EMAC platform data */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2690,6 +2701,12 @@
priv->ctrl_ram_size = pdata->ctrl_ram_size;
priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset;
+ if (pdata->hw_ram_addr)
+ priv->hw_ram_addr = pdata->hw_ram_addr;
+ else
+ priv->hw_ram_addr = (u32 __force)res->start +
+ pdata->ctrl_ram_offset;
+
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n");
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 05adb6a..3269292 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,12 +42,12 @@
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
-#elif defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP3)
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
#define SMC_MEM_RESERVED 1
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP2)
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c0c7391..2e7a3bf 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -354,7 +354,7 @@
static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
{
struct pci_dev * pci_dev;
- acpi_integer addr;
+ u64 addr;
pci_dev = to_pci_dev(dev);
/* Please ref to ACPI spec for the syntax of _ADR */
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index bf32f07..4fe36d2 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -101,9 +101,17 @@
for (list = head->next; list;) {
res = list->res;
idx = res - &list->dev->resource[0];
+
if (pci_assign_resource(list->dev, idx)) {
- if (fail_head && !pci_is_root_bus(list->dev->bus))
- add_to_failed_list(fail_head, list->dev, res);
+ if (fail_head && !pci_is_root_bus(list->dev->bus)) {
+ /*
+ * if the failed res is for ROM BAR, and it will
+ * be enabled later, don't add it to the list
+ */
+ if (!((idx == PCI_ROM_RESOURCE) &&
+ (!(res->flags & IORESOURCE_ROM_ENABLE))))
+ add_to_failed_list(fail_head, list->dev, res);
+ }
res->start = 0;
res->end = 0;
res->flags = 0;
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index a350418..9440686 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -57,7 +57,7 @@
static int toshiba_bluetooth_enable(acpi_handle handle)
{
acpi_status res1, res2;
- acpi_integer result;
+ u64 result;
/*
* Query ACPI to verify RFKill switch is set to 'on'.
@@ -95,7 +95,7 @@
static int toshiba_bt_rfkill_add(struct acpi_device *device)
{
acpi_status status;
- acpi_integer bt_present;
+ u64 bt_present;
int result = -ENODEV;
/*
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index b104302..09e9918 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -796,7 +796,7 @@
*/
static acpi_status
acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address,
- u32 bits, acpi_integer * value,
+ u32 bits, u64 *value,
void *handler_context, void *region_context)
{
int result = 0, i = 0;
@@ -813,7 +813,7 @@
if (function == ACPI_READ) {
result = ec_read(address, &temp);
- (*value) |= ((acpi_integer)temp) << i;
+ (*value) |= ((u64)temp) << i;
} else {
temp = 0xff & ((*value) >> i);
result = ec_write(address, temp);
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 0264b11..c256aac 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -7,6 +7,9 @@
*
* Copyright 2006 (c) MontaVista Software, Inc.
*
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Copyright 2010 (c) ST-Ericsson AB
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -18,6 +21,9 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/version.h>
/*
* Register definitions
@@ -30,35 +36,207 @@
#define RTC_RIS 0x14 /* Raw interrupt status register */
#define RTC_MIS 0x18 /* Masked interrupt status register */
#define RTC_ICR 0x1c /* Interrupt clear register */
+/* ST variants have additional timer functionality */
+#define RTC_TDR 0x20 /* Timer data read register */
+#define RTC_TLR 0x24 /* Timer data load register */
+#define RTC_TCR 0x28 /* Timer control register */
+#define RTC_YDR 0x30 /* Year data read register */
+#define RTC_YMR 0x34 /* Year match register */
+#define RTC_YLR 0x38 /* Year data load register */
+
+#define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */
+
+#define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */
+
+/* Common bit definitions for Interrupt status and control registers */
+#define RTC_BIT_AI (1 << 0) /* Alarm interrupt bit */
+#define RTC_BIT_PI (1 << 1) /* Periodic interrupt bit. ST variants only. */
+
+/* Common bit definations for ST v2 for reading/writing time */
+#define RTC_SEC_SHIFT 0
+#define RTC_SEC_MASK (0x3F << RTC_SEC_SHIFT) /* Second [0-59] */
+#define RTC_MIN_SHIFT 6
+#define RTC_MIN_MASK (0x3F << RTC_MIN_SHIFT) /* Minute [0-59] */
+#define RTC_HOUR_SHIFT 12
+#define RTC_HOUR_MASK (0x1F << RTC_HOUR_SHIFT) /* Hour [0-23] */
+#define RTC_WDAY_SHIFT 17
+#define RTC_WDAY_MASK (0x7 << RTC_WDAY_SHIFT) /* Day of Week [1-7] 1=Sunday */
+#define RTC_MDAY_SHIFT 20
+#define RTC_MDAY_MASK (0x1F << RTC_MDAY_SHIFT) /* Day of Month [1-31] */
+#define RTC_MON_SHIFT 25
+#define RTC_MON_MASK (0xF << RTC_MON_SHIFT) /* Month [1-12] 1=January */
+
+#define RTC_TIMER_FREQ 32768
struct pl031_local {
struct rtc_device *rtc;
void __iomem *base;
+ u8 hw_designer;
+ u8 hw_revision:4;
};
-static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+static int pl031_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
{
- struct rtc_device *rtc = dev_id;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long imsc;
- rtc_update_irq(rtc, 1, RTC_AF);
+ /* Clear any pending alarm interrupts. */
+ writel(RTC_BIT_AI, ldata->base + RTC_ICR);
- return IRQ_HANDLED;
+ imsc = readl(ldata->base + RTC_IMSC);
+
+ if (enabled == 1)
+ writel(imsc | RTC_BIT_AI, ldata->base + RTC_IMSC);
+ else
+ writel(imsc & ~RTC_BIT_AI, ldata->base + RTC_IMSC);
+
+ return 0;
}
-static int pl031_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+/*
+ * Convert Gregorian date to ST v2 RTC format.
+ */
+static int pl031_stv2_tm_to_time(struct device *dev,
+ struct rtc_time *tm, unsigned long *st_time,
+ unsigned long *bcd_year)
+{
+ int year = tm->tm_year + 1900;
+ int wday = tm->tm_wday;
+
+ /* wday masking is not working in hardware so wday must be valid */
+ if (wday < -1 || wday > 6) {
+ dev_err(dev, "invalid wday value %d\n", tm->tm_wday);
+ return -EINVAL;
+ } else if (wday == -1) {
+ /* wday is not provided, calculate it here */
+ unsigned long time;
+ struct rtc_time calc_tm;
+
+ rtc_tm_to_time(tm, &time);
+ rtc_time_to_tm(time, &calc_tm);
+ wday = calc_tm.tm_wday;
+ }
+
+ *bcd_year = (bin2bcd(year % 100) | bin2bcd(year / 100) << 8);
+
+ *st_time = ((tm->tm_mon + 1) << RTC_MON_SHIFT)
+ | (tm->tm_mday << RTC_MDAY_SHIFT)
+ | ((wday + 1) << RTC_WDAY_SHIFT)
+ | (tm->tm_hour << RTC_HOUR_SHIFT)
+ | (tm->tm_min << RTC_MIN_SHIFT)
+ | (tm->tm_sec << RTC_SEC_SHIFT);
+
+ return 0;
+}
+
+/*
+ * Convert ST v2 RTC format to Gregorian date.
+ */
+static int pl031_stv2_time_to_tm(unsigned long st_time, unsigned long bcd_year,
+ struct rtc_time *tm)
+{
+ tm->tm_year = bcd2bin(bcd_year) + (bcd2bin(bcd_year >> 8) * 100);
+ tm->tm_mon = ((st_time & RTC_MON_MASK) >> RTC_MON_SHIFT) - 1;
+ tm->tm_mday = ((st_time & RTC_MDAY_MASK) >> RTC_MDAY_SHIFT);
+ tm->tm_wday = ((st_time & RTC_WDAY_MASK) >> RTC_WDAY_SHIFT) - 1;
+ tm->tm_hour = ((st_time & RTC_HOUR_MASK) >> RTC_HOUR_SHIFT);
+ tm->tm_min = ((st_time & RTC_MIN_MASK) >> RTC_MIN_SHIFT);
+ tm->tm_sec = ((st_time & RTC_SEC_MASK) >> RTC_SEC_SHIFT);
+
+ tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+ tm->tm_year -= 1900;
+
+ return 0;
+}
+
+static int pl031_stv2_read_time(struct device *dev, struct rtc_time *tm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- switch (cmd) {
- case RTC_AIE_OFF:
- writel(1, ldata->base + RTC_MIS);
- return 0;
- case RTC_AIE_ON:
- writel(0, ldata->base + RTC_MIS);
- return 0;
+ pl031_stv2_time_to_tm(readl(ldata->base + RTC_DR),
+ readl(ldata->base + RTC_YDR), tm);
+
+ return 0;
+}
+
+static int pl031_stv2_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long time;
+ unsigned long bcd_year;
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_tm_to_time(dev, tm, &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YLR);
+ writel(time, ldata->base + RTC_LR);
}
- return -ENOIOCTLCMD;
+ return ret;
+}
+
+static int pl031_stv2_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pl031_stv2_time_to_tm(readl(ldata->base + RTC_MR),
+ readl(ldata->base + RTC_YMR), &alarm->time);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
+
+ return ret;
+}
+
+static int pl031_stv2_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned long bcd_year;
+ int ret;
+
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = pl031_stv2_tm_to_time(dev, &alarm->time,
+ &time, &bcd_year);
+ if (ret == 0) {
+ writel(bcd_year, ldata->base + RTC_YMR);
+ writel(time, ldata->base + RTC_MR);
+
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
+
+ return ret;
+}
+
+static irqreturn_t pl031_interrupt(int irq, void *dev_id)
+{
+ struct pl031_local *ldata = dev_id;
+ unsigned long rtcmis;
+ unsigned long events = 0;
+
+ rtcmis = readl(ldata->base + RTC_MIS);
+ if (rtcmis) {
+ writel(rtcmis, ldata->base + RTC_ICR);
+
+ if (rtcmis & RTC_BIT_AI)
+ events |= (RTC_AF | RTC_IRQF);
+
+ /* Timer interrupt is only available in ST variants */
+ if ((rtcmis & RTC_BIT_PI) &&
+ (ldata->hw_designer == AMBA_VENDOR_ST))
+ events |= (RTC_PF | RTC_IRQF);
+
+ rtc_update_irq(ldata->rtc, 1, events);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
}
static int pl031_read_time(struct device *dev, struct rtc_time *tm)
@@ -74,11 +252,14 @@
{
unsigned long time;
struct pl031_local *ldata = dev_get_drvdata(dev);
+ int ret;
- rtc_tm_to_time(tm, &time);
- writel(time, ldata->base + RTC_LR);
+ ret = rtc_tm_to_time(tm, &time);
- return 0;
+ if (ret == 0)
+ writel(time, ldata->base + RTC_LR);
+
+ return ret;
}
static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
@@ -86,8 +267,9 @@
struct pl031_local *ldata = dev_get_drvdata(dev);
rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
- alarm->pending = readl(ldata->base + RTC_RIS);
- alarm->enabled = readl(ldata->base + RTC_IMSC);
+
+ alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
+ alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
return 0;
}
@@ -96,22 +278,71 @@
{
struct pl031_local *ldata = dev_get_drvdata(dev);
unsigned long time;
+ int ret;
- rtc_tm_to_time(&alarm->time, &time);
+ /* At the moment, we can only deal with non-wildcarded alarm times. */
+ ret = rtc_valid_tm(&alarm->time);
+ if (ret == 0) {
+ ret = rtc_tm_to_time(&alarm->time, &time);
+ if (ret == 0) {
+ writel(time, ldata->base + RTC_MR);
+ pl031_alarm_irq_enable(dev, alarm->enabled);
+ }
+ }
- writel(time, ldata->base + RTC_MR);
- writel(!alarm->enabled, ldata->base + RTC_MIS);
+ return ret;
+}
+
+/* Periodic interrupt is only available in ST variants. */
+static int pl031_irq_set_state(struct device *dev, int enabled)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ if (enabled == 1) {
+ /* Clear any pending timer interrupt. */
+ writel(RTC_BIT_PI, ldata->base + RTC_ICR);
+
+ writel(readl(ldata->base + RTC_IMSC) | RTC_BIT_PI,
+ ldata->base + RTC_IMSC);
+
+ /* Now start the timer */
+ writel(readl(ldata->base + RTC_TCR) | RTC_TCR_EN,
+ ldata->base + RTC_TCR);
+
+ } else {
+ writel(readl(ldata->base + RTC_IMSC) & (~RTC_BIT_PI),
+ ldata->base + RTC_IMSC);
+
+ /* Also stop the timer */
+ writel(readl(ldata->base + RTC_TCR) & (~RTC_TCR_EN),
+ ldata->base + RTC_TCR);
+ }
+ /* Wait at least 1 RTC32 clock cycle to ensure next access
+ * to RTC_TCR will succeed.
+ */
+ udelay(40);
return 0;
}
-static const struct rtc_class_ops pl031_ops = {
- .ioctl = pl031_ioctl,
- .read_time = pl031_read_time,
- .set_time = pl031_set_time,
- .read_alarm = pl031_read_alarm,
- .set_alarm = pl031_set_alarm,
-};
+static int pl031_irq_set_freq(struct device *dev, int freq)
+{
+ struct pl031_local *ldata = dev_get_drvdata(dev);
+
+ /* Cant set timer if it is already enabled */
+ if (readl(ldata->base + RTC_TCR) & RTC_TCR_EN) {
+ dev_err(dev, "can't change frequency while timer enabled\n");
+ return -EINVAL;
+ }
+
+ /* If self start bit in RTC_TCR is set timer will start here,
+ * but we never set that bit. Instead we start the timer when
+ * set_state is called with enabled == 1.
+ */
+ writel(RTC_TIMER_FREQ / freq, ldata->base + RTC_TLR);
+
+ return 0;
+}
static int pl031_remove(struct amba_device *adev)
{
@@ -131,18 +362,20 @@
{
int ret;
struct pl031_local *ldata;
+ struct rtc_class_ops *ops = id->data;
ret = amba_request_regions(adev, NULL);
if (ret)
goto err_req;
- ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL);
+ ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL);
if (!ldata) {
ret = -ENOMEM;
goto out;
}
ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
+
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
@@ -150,24 +383,36 @@
amba_set_drvdata(adev, ldata);
- if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED,
- "rtc-pl031", ldata->rtc)) {
- ret = -EIO;
- goto out_no_irq;
- }
+ ldata->hw_designer = amba_manf(adev);
+ ldata->hw_revision = amba_rev(adev);
- ldata->rtc = rtc_device_register("pl031", &adev->dev, &pl031_ops,
- THIS_MODULE);
+ dev_dbg(&adev->dev, "designer ID = 0x%02x\n", ldata->hw_designer);
+ dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
+
+ /* Enable the clockwatch on ST Variants */
+ if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
+ (ldata->hw_revision > 1))
+ writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
+ ldata->base + RTC_CR);
+
+ ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
+ THIS_MODULE);
if (IS_ERR(ldata->rtc)) {
ret = PTR_ERR(ldata->rtc);
goto out_no_rtc;
}
+ if (request_irq(adev->irq[0], pl031_interrupt,
+ IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+
return 0;
-out_no_rtc:
- free_irq(adev->irq[0], ldata->rtc);
out_no_irq:
+ rtc_device_unregister(ldata->rtc);
+out_no_rtc:
iounmap(ldata->base);
amba_set_drvdata(adev, NULL);
out_no_remap:
@@ -175,13 +420,57 @@
out:
amba_release_regions(adev);
err_req:
+
return ret;
}
+/* Operations for the original ARM version */
+static struct rtc_class_ops arm_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+};
+
+/* The First ST derivative */
+static struct rtc_class_ops stv1_pl031_ops = {
+ .read_time = pl031_read_time,
+ .set_time = pl031_set_time,
+ .read_alarm = pl031_read_alarm,
+ .set_alarm = pl031_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
+/* And the second ST derivative */
+static struct rtc_class_ops stv2_pl031_ops = {
+ .read_time = pl031_stv2_read_time,
+ .set_time = pl031_stv2_set_time,
+ .read_alarm = pl031_stv2_read_alarm,
+ .set_alarm = pl031_stv2_set_alarm,
+ .alarm_irq_enable = pl031_alarm_irq_enable,
+ .irq_set_state = pl031_irq_set_state,
+ .irq_set_freq = pl031_irq_set_freq,
+};
+
static struct amba_id pl031_ids[] __initdata = {
{
.id = 0x00041031,
.mask = 0x000fffff,
+ .data = &arm_pl031_ops,
+ },
+ /* ST Micro variants */
+ {
+ .id = 0x00180031,
+ .mask = 0x00ffffff,
+ .data = &stv1_pl031_ops,
+ },
+ {
+ .id = 0x00280031,
+ .mask = 0x00ffffff,
+ .data = &stv2_pl031_ops,
},
{0, 0},
};
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 9ab1ae4..4951aa8 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2139,9 +2139,8 @@
blk_queue_logical_block_size(block->request_queue, block->bp_block);
max = block->base->discipline->max_blocks << block->s2b_shift;
- blk_queue_max_sectors(block->request_queue, max);
- blk_queue_max_phys_segments(block->request_queue, -1L);
- blk_queue_max_hw_segments(block->request_queue, -1L);
+ blk_queue_max_hw_sectors(block->request_queue, max);
+ blk_queue_max_segments(block->request_queue, -1L);
/* with page sized segments we can translate each segement into
* one idaw/tidaw
*/
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 8d3d720..097da8c 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -222,9 +222,8 @@
goto cleanup_queue;
blk_queue_logical_block_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE);
- blk_queue_max_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC);
- blk_queue_max_phys_segments(blkdat->request_queue, -1L);
- blk_queue_max_hw_segments(blkdat->request_queue, -1L);
+ blk_queue_max_hw_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC);
+ blk_queue_max_segments(blkdat->request_queue, -1L);
blk_queue_max_segment_size(blkdat->request_queue, -1L);
blk_queue_segment_boundary(blkdat->request_queue, -1L);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 87b536a..732f6d3 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4195,7 +4195,7 @@
if (tgt->service_parms.class3_parms[0] & 0x80000000)
rport->supported_classes |= FC_COS_CLASS3;
if (rport->rqst_q)
- blk_queue_max_hw_segments(rport->rqst_q, 1);
+ blk_queue_max_segments(rport->rqst_q, 1);
} else
tgt_dbg(tgt, "rport add failed\n");
spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -4669,7 +4669,7 @@
}
if (shost_to_fc_host(shost)->rqst_q)
- blk_queue_max_hw_segments(shost_to_fc_host(shost)->rqst_q, 1);
+ blk_queue_max_segments(shost_to_fc_host(shost)->rqst_q, 1);
dev_set_drvdata(dev, vhost);
spin_lock(&ibmvfc_driver_lock);
list_add_tail(&vhost->queue, &ibmvfc_head);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 9e52d16..032f0d0 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3674,7 +3674,7 @@
if (ipr_is_vset_device(res)) {
blk_queue_rq_timeout(sdev->request_queue,
IPR_VSET_RW_TIMEOUT);
- blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
+ blk_queue_max_hw_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
}
if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
sdev->allow_restart = 1;
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index b6f1ef9..9b1c143 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -235,7 +235,7 @@
scsi_dev->allow_restart = 1;
blk_queue_rq_timeout(scsi_dev->request_queue,
PMCRAID_VSET_IO_TIMEOUT);
- blk_queue_max_sectors(scsi_dev->request_queue,
+ blk_queue_max_hw_sectors(scsi_dev->request_queue,
PMCRAID_VSET_MAX_SECTORS);
}
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 513661f..1c08f61 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1018,6 +1018,8 @@
* scsi_get_vpd_page - Get Vital Product Data from a SCSI device
* @sdev: The device to ask
* @page: Which Vital Product Data to return
+ * @buf: where to store the VPD
+ * @buf_len: number of bytes in the VPD buffer area
*
* SCSI devices may optionally supply Vital Product Data. Each 'page'
* of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 5697709..1646fe7 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1630,10 +1630,10 @@
/*
* this limit is imposed by hardware restrictions
*/
- blk_queue_max_hw_segments(q, shost->sg_tablesize);
- blk_queue_max_phys_segments(q, SCSI_MAX_SG_CHAIN_SEGMENTS);
+ blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
+ SCSI_MAX_SG_CHAIN_SEGMENTS));
- blk_queue_max_sectors(q, shost->max_sectors);
+ blk_queue_max_hw_sectors(q, shost->max_sectors);
blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
blk_queue_segment_boundary(q, shost->dma_boundary);
dma_set_seg_boundary(dev, shost->dma_boundary);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index f697229..4bc8b77 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -879,7 +879,7 @@
* broken RA4x00 Compaq Disk Array
*/
if (*bflags & BLIST_MAX_512)
- blk_queue_max_sectors(sdev->request_queue, 512);
+ blk_queue_max_hw_sectors(sdev->request_queue, 512);
/*
* Some devices may not want to have a start command automatically
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 040f751..c996d98 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -287,8 +287,7 @@
if (list_empty(&sdp->sfds)) { /* no existing opens on this device */
sdp->sgdebug = 0;
q = sdp->device->request_queue;
- sdp->sg_tablesize = min(queue_max_hw_segments(q),
- queue_max_phys_segments(q));
+ sdp->sg_tablesize = queue_max_segments(q);
}
if ((sfp = sg_add_sfp(sdp, dev)))
filp->private_data = sfp;
@@ -1376,8 +1375,7 @@
sdp->device = scsidp;
INIT_LIST_HEAD(&sdp->sfds);
init_waitqueue_head(&sdp->o_excl_wait);
- sdp->sg_tablesize = min(queue_max_hw_segments(q),
- queue_max_phys_segments(q));
+ sdp->sg_tablesize = queue_max_segments(q);
sdp->index = k;
kref_init(&sdp->d_ref);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d04ea9a..f67d1a1 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3983,8 +3983,7 @@
return -ENODEV;
}
- i = min(queue_max_hw_segments(SDp->request_queue),
- queue_max_phys_segments(SDp->request_queue));
+ i = queue_max_segments(SDp->request_queue);
if (st_max_sg_segs < i)
i = st_max_sg_segs;
buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ef7adc8..ce6c353 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -71,6 +71,7 @@
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int ifls; /* vendor-specific */
+ bool autorts;
};
/* There is by now at least one vendor with differing details, so handle it */
@@ -308,6 +309,11 @@
TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+
+ if (uap->autorts) {
+ /* We need to disable auto-RTS if we want to turn RTS off */
+ TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
+ }
#undef TIOCMBIT
writew(cr, uap->port.membase + UART011_CR);
@@ -437,6 +443,7 @@
/*
* disable the port
*/
+ uap->autorts = false;
writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
/*
@@ -456,6 +463,7 @@
pl011_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int lcr_h, old_cr;
unsigned long flags;
unsigned int baud, quot;
@@ -532,6 +540,17 @@
old_cr = readw(port->membase + UART011_CR);
writew(0, port->membase + UART011_CR);
+ if (termios->c_cflag & CRTSCTS) {
+ if (old_cr & UART011_CR_RTS)
+ old_cr |= UART011_CR_RTSEN;
+
+ old_cr |= UART011_CR_CTSEN;
+ uap->autorts = true;
+ } else {
+ old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
+ uap->autorts = false;
+ }
+
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0fee95c..a191fa2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -181,7 +181,7 @@
config SPI_OMAP24XX
tristate "McSPI driver for OMAP24xx/OMAP34xx"
- depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP2 || ARCH_OMAP3
help
SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
(McSPI) modules.
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index ff5bbb9..9aeb681 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -363,6 +363,7 @@
void *rx_end;
enum ssp_reading read;
enum ssp_writing write;
+ u32 exp_fifo_level;
};
/**
@@ -501,6 +502,9 @@
while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
readw(SSP_DR(pl022->virtbase));
} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+
+ pl022->exp_fifo_level = 0;
+
return limit;
}
@@ -583,10 +587,9 @@
* errons in 8bit wide transfers on ARM variants (just 8 words
* FIFO, means only 8x8 = 64 bits in FIFO) at least.
*
- * FIXME: currently we have no logic to account for this.
- * perhaps there is even something broken in HW regarding
- * 8bit transfers (it doesn't fail on 16bit) so this needs
- * more investigation...
+ * To prevent this issue, the TX FIFO is only filled to the
+ * unused RX FIFO fill length, regardless of what the TX
+ * FIFO status flag indicates.
*/
dev_dbg(&pl022->adev->dev,
"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
@@ -613,11 +616,12 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
/*
- * Write as much as you can, while keeping an eye on the RX FIFO!
+ * Write as much as possible up to the RX FIFO size
*/
- while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ while ((pl022->exp_fifo_level < pl022->vendor->fifodepth)
&& (pl022->tx < pl022->tx_end)) {
switch (pl022->write) {
case WRITING_NULL:
@@ -634,6 +638,7 @@
break;
}
pl022->tx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level++;
/*
* This inner reader takes care of things appearing in the RX
* FIFO as we're transmitting. This will happen a lot since the
@@ -660,6 +665,7 @@
break;
}
pl022->rx += (pl022->cur_chip->n_bytes);
+ pl022->exp_fifo_level--;
}
}
/*
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index bf5f95a..715c518 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1014,7 +1014,7 @@
OMAP24XX_DMA_SPI2_TX1,
};
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) \
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
|| defined(CONFIG_ARCH_OMAP4)
static u8 __initdata spi3_rxdma_id[] = {
OMAP24XX_DMA_SPI3_RX0,
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index 62b2828..45d9081 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -363,10 +363,7 @@
blkdev->gd->queue = blk_init_queue(blkvsc_request, &blkdev->lock);
blk_queue_max_segment_size(blkdev->gd->queue, PAGE_SIZE);
- blk_queue_max_phys_segments(blkdev->gd->queue,
- MAX_MULTIPAGE_BUFFER_COUNT);
- blk_queue_max_hw_segments(blkdev->gd->queue,
- MAX_MULTIPAGE_BUFFER_COUNT);
+ blk_queue_max_segments(blkdev->gd->queue, MAX_MULTIPAGE_BUFFER_COUNT);
blk_queue_segment_boundary(blkdev->gd->queue, PAGE_SIZE-1);
blk_queue_bounce_limit(blkdev->gd->queue, BLK_BOUNCE_ANY);
blk_queue_dma_alignment(blkdev->gd->queue, 511);
diff --git a/drivers/staging/phison/phison.c b/drivers/staging/phison/phison.c
index 3817d74..fcba78d 100644
--- a/drivers/staging/phison/phison.c
+++ b/drivers/staging/phison/phison.c
@@ -62,7 +62,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL);
+ ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL, 0);
dev_dbg(&pdev->dev, "phison_init_one(), ret = %x\n", ret);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 81aac7f..4f5bb56 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -61,7 +61,7 @@
default y if ARCH_W90X900
default y if ARCH_AT91SAM9G45
default y if ARCH_MXC
- default y if ARCH_OMAP34XX
+ default y if ARCH_OMAP3
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index df77f61..f1e3aad 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -60,7 +60,7 @@
#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
+ UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
/* B.3.2 Class-Specific AC Interface Descriptor */
-static struct uac_ac_header_descriptor_2 ac_header_desc = {
+static struct uac_ac_header_descriptor_v1_2 ac_header_desc = {
.bLength = UAC_DT_AC_HEADER_LENGTH,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_HEADER,
@@ -124,7 +124,7 @@
};
#define OUTPUT_TERMINAL_ID 3
-static struct uac_output_terminal_descriptor output_terminal_desc = {
+static struct uac_output_terminal_descriptor_v1 output_terminal_desc = {
.bLength = UAC_DT_OUTPUT_TERMINAL_SIZE,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
@@ -154,7 +154,7 @@
};
/* B.4.2 Class-Specific AS Interface Descriptor */
-static struct uac_as_header_descriptor as_header_desc = {
+static struct uac_as_header_descriptor_v1 as_header_desc = {
.bLength = UAC_DT_AS_HEADER_SIZE,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_AS_GENERAL,
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index d0b1e83..5f6a2e0 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -237,7 +237,7 @@
};
/* B.3.2 Class-Specific AC Interface Descriptor */
-static const struct uac_ac_header_descriptor_1 ac_header_desc = {
+static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = {
.bLength = UAC_DT_AC_HEADER_SIZE(1),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = USB_MS_HEADER,
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1ec3857..d8d6d34 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1118,7 +1118,7 @@
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
#include "ehci-omap.c"
#define PLATFORM_DRIVER ehci_hcd_omap_driver
#endif
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index d9db864..b4c783c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -37,7 +37,7 @@
depends on USB_MUSB_HDRC
default y if ARCH_DAVINCI
default y if ARCH_OMAP2430
- default y if ARCH_OMAP34XX
+ default y if ARCH_OMAP3
default y if (BF54x && !BF544)
default y if (BF52x && !BF522 && !BF523)
@@ -48,7 +48,7 @@
depends on USB_MUSB_HDRC && ARCH_OMAP2430
comment "OMAP 343x high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+ depends on USB_MUSB_HDRC && ARCH_OMAP3
comment "Blackfin high speed USB Support"
depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
@@ -153,7 +153,7 @@
config USB_INVENTRA_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN
+ default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN
help
Enable DMA transfers using Mentor's engine.
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5eb9318..738efd8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1000,7 +1000,7 @@
* more than selecting one of a bunch of predefined configurations.
*/
#if defined(CONFIG_USB_TUSB6010) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
static ushort __initdata fifo_mode = 4;
#else
static ushort __initdata fifo_mode = 2;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 03d5090..5514c7e 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -562,7 +562,7 @@
extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
#else
#define musb_platform_try_idle(x, y) do {} while (0)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index e5e6df3..aadc16b 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -134,14 +134,14 @@
if (us->fflags & US_FL_MAX_SECTORS_MIN)
max_sectors = PAGE_CACHE_SIZE >> 9;
if (queue_max_sectors(sdev->request_queue) > max_sectors)
- blk_queue_max_sectors(sdev->request_queue,
+ blk_queue_max_hw_sectors(sdev->request_queue,
max_sectors);
} else if (sdev->type == TYPE_TAPE) {
/* Tapes need much higher max_sector limits, so just
* raise it to the maximum possible (4 GB / 512) and
* let the queue segment size sort out the real limit.
*/
- blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF);
+ blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
}
/* Some USB host controllers can't do DMA; they have to use PIO.
@@ -495,7 +495,7 @@
unsigned short ms;
if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) {
- blk_queue_max_sectors(sdev->request_queue, ms);
+ blk_queue_max_hw_sectors(sdev->request_queue, ms);
return strlen(buf);
}
return -EINVAL;
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 567db6a..6978ae4 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/lcd.h>
#include <plat/board-ams-delta.h>
#include <mach/hardware.h>
@@ -32,6 +33,71 @@
#define AMS_DELTA_DEFAULT_CONTRAST 112
+#define AMS_DELTA_MAX_CONTRAST 0x00FF
+#define AMS_DELTA_LCD_POWER 0x0100
+
+
+/* LCD class device section */
+
+static int ams_delta_lcd;
+
+static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
+{
+ if (power == FB_BLANK_UNBLANK) {
+ if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) {
+ omap_writeb(ams_delta_lcd & AMS_DELTA_MAX_CONTRAST,
+ OMAP_PWL_ENABLE);
+ omap_writeb(1, OMAP_PWL_CLK_ENABLE);
+ ams_delta_lcd |= AMS_DELTA_LCD_POWER;
+ }
+ } else {
+ if (ams_delta_lcd & AMS_DELTA_LCD_POWER) {
+ omap_writeb(0, OMAP_PWL_ENABLE);
+ omap_writeb(0, OMAP_PWL_CLK_ENABLE);
+ ams_delta_lcd &= ~AMS_DELTA_LCD_POWER;
+ }
+ }
+ return 0;
+}
+
+static int ams_delta_lcd_set_contrast(struct lcd_device *dev, int value)
+{
+ if ((value >= 0) && (value <= AMS_DELTA_MAX_CONTRAST)) {
+ omap_writeb(value, OMAP_PWL_ENABLE);
+ ams_delta_lcd &= ~AMS_DELTA_MAX_CONTRAST;
+ ams_delta_lcd |= value;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_LCD_CLASS_DEVICE
+static int ams_delta_lcd_get_power(struct lcd_device *dev)
+{
+ if (ams_delta_lcd & AMS_DELTA_LCD_POWER)
+ return FB_BLANK_UNBLANK;
+ else
+ return FB_BLANK_POWERDOWN;
+}
+
+static int ams_delta_lcd_get_contrast(struct lcd_device *dev)
+{
+ if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER))
+ return 0;
+
+ return ams_delta_lcd & AMS_DELTA_MAX_CONTRAST;
+}
+
+static struct lcd_ops ams_delta_lcd_ops = {
+ .get_power = ams_delta_lcd_get_power,
+ .set_power = ams_delta_lcd_set_power,
+ .get_contrast = ams_delta_lcd_get_contrast,
+ .set_contrast = ams_delta_lcd_set_contrast,
+};
+#endif
+
+
+/* omapfb panel section */
+
static int ams_delta_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
@@ -48,10 +114,6 @@
AMS_DELTA_LATCH2_LCD_NDISP);
ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN,
AMS_DELTA_LATCH2_LCD_VBLEN);
-
- omap_writeb(1, OMAP_PWL_CLK_ENABLE);
- omap_writeb(AMS_DELTA_DEFAULT_CONTRAST, OMAP_PWL_ENABLE);
-
return 0;
}
@@ -91,8 +153,31 @@
.get_caps = ams_delta_panel_get_caps,
};
+
+/* platform driver section */
+
static int ams_delta_panel_probe(struct platform_device *pdev)
{
+ struct lcd_device *lcd_device = NULL;
+#ifdef CONFIG_LCD_CLASS_DEVICE
+ int ret;
+
+ lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
+ &ams_delta_lcd_ops);
+
+ if (IS_ERR(lcd_device)) {
+ ret = PTR_ERR(lcd_device);
+ dev_err(&pdev->dev, "failed to register device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, lcd_device);
+ lcd_device->props.max_contrast = AMS_DELTA_MAX_CONTRAST;
+#endif
+
+ ams_delta_lcd_set_contrast(lcd_device, AMS_DELTA_DEFAULT_CONTRAST);
+ ams_delta_lcd_set_power(lcd_device, FB_BLANK_UNBLANK);
+
omapfb_register_panel(&ams_delta_panel);
return 0;
}
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 2c4f470..8ce60e1 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -486,10 +486,11 @@
return 0;
case 12:
var->bits_per_pixel = 16;
- plane->color_mode = OMAPFB_COLOR_RGB444;
- return 0;
case 16:
- plane->color_mode = OMAPFB_COLOR_RGB565;
+ if (plane->fbdev->panel->bpp == 12)
+ plane->color_mode = OMAPFB_COLOR_RGB444;
+ else
+ plane->color_mode = OMAPFB_COLOR_RGB565;
return 0;
default:
return -EINVAL;
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index b12a59c..dfb57ee 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -13,10 +13,28 @@
help
LCD Panel used in TI's SDP3430 and EVM boards
+config PANEL_SHARP_LQ043T1DG01
+ tristate "Sharp LQ043T1DG01 LCD Panel"
+ depends on OMAP2_DSS
+ help
+ LCD Panel used in TI's OMAP3517 EVM boards
+
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
help
Taal DSI command mode panel from TPO.
+config PANEL_TOPPOLY_TDO35S
+ tristate "Toppoly TDO35S LCD Panel support"
+ depends on OMAP2_DSS
+ help
+ LCD Panel used in CM-T35
+
+config PANEL_TPO_TD043MTEA1
+ tristate "TPO TD043MTEA1 LCD Panel"
+ depends on OMAP2_DSS && I2C
+ help
+ LCD Panel used in OMAP3 Pandora
+
endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 9556464..e2bb321 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,4 +1,7 @@
obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
+obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c
index eb48d1a..c59e4ba 100644
--- a/drivers/video/omap2/displays/panel-generic.c
+++ b/drivers/video/omap2/displays/panel-generic.c
@@ -35,6 +35,35 @@
.vbp = 7,
};
+static int generic_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void generic_panel_power_off(struct omap_dss_device *dssdev)
+{
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
static int generic_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT;
@@ -51,27 +80,40 @@
{
int r = 0;
- if (dssdev->platform_enable)
- r = dssdev->platform_enable(dssdev);
+ r = generic_panel_power_on(dssdev);
+ if (r)
+ return r;
- return r;
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
}
static void generic_panel_disable(struct omap_dss_device *dssdev)
{
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
+ generic_panel_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int generic_panel_suspend(struct omap_dss_device *dssdev)
{
- generic_panel_disable(dssdev);
+ generic_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int generic_panel_resume(struct omap_dss_device *dssdev)
{
- return generic_panel_enable(dssdev);
+ int r = 0;
+
+ r = generic_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
}
static struct omap_dss_driver generic_driver = {
diff --git a/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c
new file mode 100644
index 0000000..1026746
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c
@@ -0,0 +1,159 @@
+/*
+ * LCD panel driver for Sharp LQ043T1DG01
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings sharp_lq_timings = {
+ .x_res = 480,
+ .y_res = 272,
+
+ .pixel_clock = 9000,
+
+ .hsw = 42,
+ .hfp = 3,
+ .hbp = 2,
+
+ .vsw = 11,
+ .vfp = 3,
+ .vbp = 2,
+};
+
+static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ /* wait couple of vsyncs until enabling the LCD */
+ msleep(50);
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
+{
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ /* wait at least 5 vsyncs after disabling the LCD */
+ msleep(100);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
+{
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
+ dssdev->panel.acb = 0x0;
+ dssdev->panel.timings = sharp_lq_timings;
+
+ return 0;
+}
+
+static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ r = sharp_lq_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
+{
+ sharp_lq_panel_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
+{
+ sharp_lq_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+ return 0;
+}
+
+static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ r = sharp_lq_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static struct omap_dss_driver sharp_lq_driver = {
+ .probe = sharp_lq_panel_probe,
+ .remove = sharp_lq_panel_remove,
+
+ .enable = sharp_lq_panel_enable,
+ .disable = sharp_lq_panel_disable,
+ .suspend = sharp_lq_panel_suspend,
+ .resume = sharp_lq_panel_resume,
+
+ .driver = {
+ .name = "sharp_lq_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sharp_lq_panel_drv_init(void)
+{
+ return omap_dss_register_driver(&sharp_lq_driver);
+}
+
+static void __exit sharp_lq_panel_drv_exit(void)
+{
+ omap_dss_unregister_driver(&sharp_lq_driver);
+}
+
+module_init(sharp_lq_panel_drv_init);
+module_exit(sharp_lq_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index bbe880bb..8d51a5e 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -20,19 +20,10 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <plat/display.h>
-struct sharp_data {
- /* XXX This regulator should actually be in SDP board file, not here,
- * as it doesn't actually power the LCD, but something else that
- * affects the output to LCD (I think. Somebody clarify). It doesn't do
- * harm here, as SDP is the only board using this currently */
- struct regulator *vdvi_reg;
-};
-
static struct omap_video_timings sharp_ls_timings = {
.x_res = 480,
.y_res = 640,
@@ -50,77 +41,81 @@
static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd;
-
dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS;
dssdev->panel.acb = 0x28;
dssdev->panel.timings = sharp_ls_timings;
- sd = kzalloc(sizeof(*sd), GFP_KERNEL);
- if (!sd)
- return -ENOMEM;
-
- dev_set_drvdata(&dssdev->dev, sd);
-
- sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi");
- if (IS_ERR(sd->vdvi_reg)) {
- kfree(sd);
- pr_err("failed to get VDVI regulator\n");
- return PTR_ERR(sd->vdvi_reg);
- }
-
return 0;
}
static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
- regulator_put(sd->vdvi_reg);
-
- kfree(sd);
}
-static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+static int sharp_ls_power_on(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
int r = 0;
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
- regulator_enable(sd->vdvi_reg);
-
- if (dssdev->platform_enable)
+ if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void sharp_ls_power_off(struct omap_dss_device *dssdev)
+{
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ /* wait at least 5 vsyncs after disabling the LCD */
+
+ msleep(100);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+ r = sharp_ls_power_on(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
{
- struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
- regulator_disable(sd->vdvi_reg);
-
- /* wait at least 5 vsyncs after disabling the LCD */
-
- msleep(100);
+ sharp_ls_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev)
{
- sharp_ls_panel_disable(dssdev);
+ sharp_ls_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
{
- return sharp_ls_panel_enable(dssdev);
+ int r;
+ r = sharp_ls_power_on(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return r;
}
static struct omap_dss_driver sharp_ls_driver = {
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 1f01dfc..fcd6a61 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -63,6 +63,8 @@
/* #define TAAL_USE_ESD_CHECK */
#define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000)
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
+
struct taal_data {
struct backlight_device *bldev;
@@ -510,15 +512,12 @@
if (td->esd_wq == NULL) {
dev_err(&dssdev->dev, "can't create ESD workqueue\n");
r = -ENOMEM;
- goto err2;
+ goto err1;
}
INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
dev_set_drvdata(&dssdev->dev, td);
- dssdev->get_timings = taal_get_timings;
- dssdev->get_resolution = taal_get_resolution;
-
/* if no platform set_backlight() defined, presume DSI backlight
* control */
if (!dssdev->set_backlight)
@@ -528,7 +527,7 @@
&taal_bl_ops);
if (IS_ERR(bldev)) {
r = PTR_ERR(bldev);
- goto err1;
+ goto err2;
}
td->bldev = bldev;
@@ -621,14 +620,12 @@
kfree(td);
}
-static int taal_enable(struct omap_dss_device *dssdev)
+static int taal_power_on(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
u8 id1, id2, id3;
int r;
- dev_dbg(&dssdev->dev, "enable\n");
-
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
@@ -638,6 +635,16 @@
/* it seems we have to wait a bit until taal is ready */
msleep(5);
+ dsi_bus_lock();
+
+ r = omapdss_dsi_display_enable(dssdev);
+ if (r) {
+ dev_err(&dssdev->dev, "failed to enable DSI\n");
+ goto err0;
+ }
+
+ omapdss_dsi_vc_enable_hs(TCH, false);
+
r = taal_sleep_out(td);
if (r)
goto err;
@@ -661,6 +668,10 @@
taal_dcs_write_0(DCS_DISPLAY_ON);
+ r = _taal_enable_te(dssdev, td->te_enabled);
+ if (r)
+ goto err;
+
#ifdef TAAL_USE_ESD_CHECK
queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
#endif
@@ -676,19 +687,27 @@
td->intro_printed = true;
}
+ omapdss_dsi_vc_enable_hs(TCH, true);
+
+ dsi_bus_unlock();
+
return 0;
err:
+ dsi_bus_unlock();
+
+ omapdss_dsi_display_disable(dssdev);
+err0:
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
return r;
}
-static void taal_disable(struct omap_dss_device *dssdev)
+static void taal_power_off(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- dev_dbg(&dssdev->dev, "disable\n");
+ dsi_bus_lock();
cancel_delayed_work(&td->esd_work);
@@ -698,41 +717,124 @@
/* wait a bit so that the message goes through */
msleep(10);
+ omapdss_dsi_display_disable(dssdev);
+
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
td->enabled = 0;
+
+ dsi_bus_unlock();
+}
+
+static int taal_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+ dev_dbg(&dssdev->dev, "enable\n");
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
+ return -EINVAL;
+
+ r = taal_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return r;
+}
+
+static void taal_disable(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "disable\n");
+
+ if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+ taal_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int taal_suspend(struct omap_dss_device *dssdev)
{
- struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bldev = td->bldev;
+ dev_dbg(&dssdev->dev, "suspend\n");
- bldev->props.power = FB_BLANK_POWERDOWN;
- taal_bl_update_status(bldev);
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return -EINVAL;
+
+ taal_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int taal_resume(struct omap_dss_device *dssdev)
{
- struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bldev = td->bldev;
+ int r;
+ dev_dbg(&dssdev->dev, "resume\n");
- bldev->props.power = FB_BLANK_UNBLANK;
- taal_bl_update_status(bldev);
+ if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
+ return -EINVAL;
+
+ r = taal_power_on(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return r;
+}
+
+static void taal_framedone_cb(int err, void *data)
+{
+ struct omap_dss_device *dssdev = data;
+ dev_dbg(&dssdev->dev, "framedone, err %d\n", err);
+ dsi_bus_unlock();
+}
+
+static int taal_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ int r;
+
+ dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+ dsi_bus_lock();
+
+ if (!td->enabled) {
+ r = 0;
+ goto err;
+ }
+
+ r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+ if (r)
+ goto err;
+
+ r = taal_set_update_window(x, y, w, h);
+ if (r)
+ goto err;
+
+ r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+ taal_framedone_cb, dssdev);
+ if (r)
+ goto err;
+
+ /* note: no bus_unlock here. unlock is in framedone_cb */
+ return 0;
+err:
+ dsi_bus_unlock();
+ return r;
+}
+
+static int taal_sync(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "sync\n");
+
+ dsi_bus_lock();
+ dsi_bus_unlock();
+
+ dev_dbg(&dssdev->dev, "sync done\n");
return 0;
}
-static void taal_setup_update(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- taal_set_update_window(x, y, w, h);
-}
-
-static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
int r;
@@ -744,25 +846,32 @@
else
r = taal_dcs_write_0(DCS_TEAR_OFF);
+ omapdss_dsi_enable_te(dssdev, enable);
+
+ /* XXX for some reason, DSI TE breaks if we don't wait here.
+ * Panel bug? Needs more studying */
+ msleep(100);
+
return r;
}
-static int taal_wait_te(struct omap_dss_device *dssdev)
+static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+ int r;
+
+ dsi_bus_lock();
+
+ r = _taal_enable_te(dssdev, enable);
+
+ dsi_bus_unlock();
+
+ return r;
+}
+
+static int taal_get_te(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- long wait = msecs_to_jiffies(500);
-
- if (!td->use_ext_te || !td->te_enabled)
- return 0;
-
- INIT_COMPLETION(td->te_completion);
- wait = wait_for_completion_timeout(&td->te_completion, wait);
- if (wait == 0) {
- dev_err(&dssdev->dev, "timeout waiting TE\n");
- return -ETIME;
- }
-
- return 0;
+ return td->te_enabled;
}
static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
@@ -772,16 +881,21 @@
dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
+ dsi_bus_lock();
+
if (td->enabled) {
r = taal_set_addr_mode(rotate, td->mirror);
-
if (r)
- return r;
+ goto err;
}
td->rotate = rotate;
+ dsi_bus_unlock();
return 0;
+err:
+ dsi_bus_unlock();
+ return r;
}
static u8 taal_get_rotate(struct omap_dss_device *dssdev)
@@ -797,16 +911,20 @@
dev_dbg(&dssdev->dev, "mirror %d\n", enable);
+ dsi_bus_lock();
if (td->enabled) {
r = taal_set_addr_mode(td->rotate, enable);
-
if (r)
- return r;
+ goto err;
}
td->mirror = enable;
+ dsi_bus_unlock();
return 0;
+err:
+ dsi_bus_unlock();
+ return r;
}
static bool taal_get_mirror(struct omap_dss_device *dssdev)
@@ -820,17 +938,23 @@
u8 id1, id2, id3;
int r;
+ dsi_bus_lock();
+
r = taal_dcs_read_1(DCS_GET_ID1, &id1);
if (r)
- return r;
+ goto err;
r = taal_dcs_read_1(DCS_GET_ID2, &id2);
if (r)
- return r;
+ goto err;
r = taal_dcs_read_1(DCS_GET_ID3, &id3);
if (r)
- return r;
+ goto err;
+ dsi_bus_unlock();
return 0;
+err:
+ dsi_bus_unlock();
+ return r;
}
static int taal_memory_read(struct omap_dss_device *dssdev,
@@ -841,6 +965,10 @@
int first = 1;
int plen;
unsigned buf_used = 0;
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+ if (!td->enabled)
+ return -ENODEV;
if (size < w * h * 3)
return -ENOMEM;
@@ -849,6 +977,8 @@
dssdev->panel.timings.x_res *
dssdev->panel.timings.y_res * 3);
+ dsi_bus_lock();
+
/* plen 1 or 2 goes into short packet. until checksum error is fixed,
* use short packets. plen 32 works, but bigger packets seem to cause
* an error. */
@@ -857,11 +987,11 @@
else
plen = 2;
- taal_setup_update(dssdev, x, y, w, h);
+ taal_set_update_window(x, y, w, h);
r = dsi_vc_set_max_rx_packet_size(TCH, plen);
if (r)
- return r;
+ goto err0;
while (buf_used < size) {
u8 dcs_cmd = first ? 0x2e : 0x3e;
@@ -894,7 +1024,8 @@
err:
dsi_vc_set_max_rx_packet_size(TCH, 1);
-
+err0:
+ dsi_bus_unlock();
return r;
}
@@ -939,8 +1070,11 @@
}
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
- if (td->use_ext_te && td->te_enabled)
- taal_enable_te(dssdev, true);
+ if (td->use_ext_te && td->te_enabled) {
+ r = taal_dcs_write_1(DCS_TEAR_ON, 0);
+ if (r)
+ goto err;
+ }
dsi_bus_unlock();
@@ -958,6 +1092,20 @@
queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
}
+static int taal_set_update_mode(struct omap_dss_device *dssdev,
+ enum omap_dss_update_mode mode)
+{
+ if (mode != OMAP_DSS_UPDATE_MANUAL)
+ return -EINVAL;
+ return 0;
+}
+
+static enum omap_dss_update_mode taal_get_update_mode(
+ struct omap_dss_device *dssdev)
+{
+ return OMAP_DSS_UPDATE_MANUAL;
+}
+
static struct omap_dss_driver taal_driver = {
.probe = taal_probe,
.remove = taal_remove,
@@ -967,9 +1115,18 @@
.suspend = taal_suspend,
.resume = taal_resume,
- .setup_update = taal_setup_update,
+ .set_update_mode = taal_set_update_mode,
+ .get_update_mode = taal_get_update_mode,
+
+ .update = taal_update,
+ .sync = taal_sync,
+
+ .get_resolution = taal_get_resolution,
+ .get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
.enable_te = taal_enable_te,
- .wait_for_te = taal_wait_te,
+ .get_te = taal_get_te,
+
.set_rotate = taal_rotate,
.get_rotate = taal_get_rotate,
.set_mirror = taal_mirror,
@@ -977,6 +1134,8 @@
.run_test = taal_run_test,
.memory_read = taal_memory_read,
+ .get_timings = taal_get_timings,
+
.driver = {
.name = "taal",
.owner = THIS_MODULE,
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
new file mode 100644
index 0000000..fa434ca
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -0,0 +1,154 @@
+/*
+ * LCD panel driver for Toppoly TDO35S
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on generic panel support
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings toppoly_tdo_panel_timings = {
+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
+ .x_res = 480,
+ .y_res = 640,
+
+ .pixel_clock = 26000,
+
+ .hfp = 104,
+ .hsw = 8,
+ .hbp = 8,
+
+ .vfp = 4,
+ .vsw = 2,
+ .vbp = 2,
+};
+
+static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
+{
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
+{
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS;
+ dssdev->panel.timings = toppoly_tdo_panel_timings;
+
+ return 0;
+}
+
+static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ r = toppoly_tdo_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
+{
+ toppoly_tdo_panel_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
+{
+ toppoly_tdo_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+ return 0;
+}
+
+static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ r = toppoly_tdo_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static struct omap_dss_driver generic_driver = {
+ .probe = toppoly_tdo_panel_probe,
+ .remove = toppoly_tdo_panel_remove,
+
+ .enable = toppoly_tdo_panel_enable,
+ .disable = toppoly_tdo_panel_disable,
+ .suspend = toppoly_tdo_panel_suspend,
+ .resume = toppoly_tdo_panel_resume,
+
+ .driver = {
+ .name = "toppoly_tdo35s_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init toppoly_tdo_panel_drv_init(void)
+{
+ return omap_dss_register_driver(&generic_driver);
+}
+
+static void __exit toppoly_tdo_panel_drv_exit(void)
+{
+ omap_dss_unregister_driver(&generic_driver);
+}
+
+module_init(toppoly_tdo_panel_drv_init);
+module_exit(toppoly_tdo_panel_drv_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
new file mode 100644
index 0000000..d578fee
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -0,0 +1,528 @@
+/*
+ * LCD panel driver for TPO TD043MTEA1
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+
+#include <plat/display.h>
+
+#define TPO_R02_MODE(x) ((x) & 7)
+#define TPO_R02_MODE_800x480 7
+#define TPO_R02_NCLK_RISING BIT(3)
+#define TPO_R02_HSYNC_HIGH BIT(4)
+#define TPO_R02_VSYNC_HIGH BIT(5)
+
+#define TPO_R03_NSTANDBY BIT(0)
+#define TPO_R03_EN_CP_CLK BIT(1)
+#define TPO_R03_EN_VGL_PUMP BIT(2)
+#define TPO_R03_EN_PWM BIT(3)
+#define TPO_R03_DRIVING_CAP_100 BIT(4)
+#define TPO_R03_EN_PRE_CHARGE BIT(6)
+#define TPO_R03_SOFTWARE_CTL BIT(7)
+
+#define TPO_R04_NFLIP_H BIT(0)
+#define TPO_R04_NFLIP_V BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
+#define TPO_R04_VGL_FREQ_1H BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+ TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
+ TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+ TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+ TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+ 106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020
+};
+
+struct tpo_td043_device {
+ struct spi_device *spi;
+ struct regulator *vcc_reg;
+ u16 gamma[12];
+ u32 mode;
+ u32 hmirror:1;
+ u32 vmirror:1;
+};
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+ struct spi_message m;
+ struct spi_transfer xfer;
+ u16 w;
+ int r;
+
+ spi_message_init(&m);
+
+ memset(&xfer, 0, sizeof(xfer));
+
+ w = ((u16)addr << 10) | (1 << 8) | data;
+ xfer.tx_buf = &w;
+ xfer.bits_per_word = 16;
+ xfer.len = 2;
+ spi_message_add_tail(&xfer, &m);
+
+ r = spi_sync(spi, &m);
+ if (r < 0)
+ dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+ return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+ u8 i, val;
+
+ /* gamma bits [9:8] */
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x11, val);
+
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x12, val);
+
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x13, val);
+
+ /* gamma bits [7:0] */
+ for (val = i = 0; i < 12; i++)
+ tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+ u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \
+ TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+ if (h)
+ reg4 &= ~TPO_R04_NFLIP_H;
+ if (v)
+ reg4 &= ~TPO_R04_NFLIP_V;
+
+ return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+
+ tpo_td043->hmirror = enable;
+ return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
+ tpo_td043->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+
+ return tpo_td043->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+ long val;
+ int ret;
+
+ ret = strict_strtol(buf, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val);
+ if (ret < 0)
+ return ret;
+
+ tpo_td043->vmirror = val;
+
+ return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+ long val;
+ int ret;
+
+ ret = strict_strtol(buf, 0, &val);
+ if (ret != 0 || val & ~7)
+ return -EINVAL;
+
+ tpo_td043->mode = val;
+
+ val |= TPO_R02_NCLK_RISING;
+ tpo_td043_write(tpo_td043->spi, 2, val);
+
+ return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+ ssize_t len = 0;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) {
+ ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+ tpo_td043->gamma[i]);
+ if (ret < 0)
+ return ret;
+ len += ret;
+ }
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+ unsigned int g[12];
+ int ret;
+ int i;
+
+ ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+ &g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+ &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+ if (ret != 12)
+ return -EINVAL;
+
+ for (i = 0; i < 12; i++)
+ tpo_td043->gamma[i] = g[i];
+
+ tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
+
+ return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+ tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+ tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+ tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+ &dev_attr_vmirror.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_gamma.attr,
+ NULL,
+};
+
+static struct attribute_group tpo_td043_attr_group = {
+ .attrs = tpo_td043_attrs,
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+ .x_res = 800,
+ .y_res = 480,
+
+ .pixel_clock = 36000,
+
+ .hsw = 1,
+ .hfp = 68,
+ .hbp = 214,
+
+ .vsw = 1,
+ .vfp = 39,
+ .vbp = 34,
+};
+
+static int tpo_td043_power_on(struct omap_dss_device *dssdev)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ int nreset_gpio = dssdev->reset_gpio;
+ int r;
+
+ r = omapdss_dpi_display_enable(dssdev);
+ if (r)
+ goto err0;
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err1;
+ }
+
+ regulator_enable(tpo_td043->vcc_reg);
+
+ /* wait for power up */
+ msleep(160);
+
+ if (gpio_is_valid(nreset_gpio))
+ gpio_set_value(nreset_gpio, 1);
+
+ tpo_td043_write(tpo_td043->spi, 2,
+ TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING);
+ tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL);
+ tpo_td043_write(tpo_td043->spi, 0x20, 0xf0);
+ tpo_td043_write(tpo_td043->spi, 0x21, 0xf0);
+ tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
+ tpo_td043->vmirror);
+ tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
+
+ return 0;
+err1:
+ omapdss_dpi_display_disable(dssdev);
+err0:
+ return r;
+}
+
+static void tpo_td043_power_off(struct omap_dss_device *dssdev)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ int nreset_gpio = dssdev->reset_gpio;
+
+ tpo_td043_write(tpo_td043->spi, 3,
+ TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+ if (gpio_is_valid(nreset_gpio))
+ gpio_set_value(nreset_gpio, 0);
+
+ /* wait for at least 2 vsyncs before cutting off power */
+ msleep(50);
+
+ tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY);
+
+ regulator_disable(tpo_td043->vcc_reg);
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ omapdss_dpi_display_disable(dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+ int ret;
+
+ dev_dbg(&dssdev->dev, "enable\n");
+
+ ret = tpo_td043_power_on(dssdev);
+ if (ret)
+ return ret;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "disable\n");
+
+ tpo_td043_power_off(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int tpo_td043_suspend(struct omap_dss_device *dssdev)
+{
+ tpo_td043_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+ return 0;
+}
+
+static int tpo_td043_resume(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ r = tpo_td043_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static int tpo_td043_probe(struct omap_dss_device *dssdev)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ int nreset_gpio = dssdev->reset_gpio;
+ int ret = 0;
+
+ dev_dbg(&dssdev->dev, "probe\n");
+
+ if (tpo_td043 == NULL) {
+ dev_err(&dssdev->dev, "missing tpo_td043_device\n");
+ return -ENODEV;
+ }
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS |
+ OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IPC;
+ dssdev->panel.timings = tpo_td043_timings;
+ dssdev->ctrl.pixel_size = 24;
+
+ tpo_td043->mode = TPO_R02_MODE_800x480;
+ memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma));
+
+ tpo_td043->vcc_reg = regulator_get(&dssdev->dev, "vcc");
+ if (IS_ERR(tpo_td043->vcc_reg)) {
+ dev_err(&dssdev->dev, "failed to get LCD VCC regulator\n");
+ ret = PTR_ERR(tpo_td043->vcc_reg);
+ goto fail_regulator;
+ }
+
+ if (gpio_is_valid(nreset_gpio)) {
+ ret = gpio_request(nreset_gpio, "lcd reset");
+ if (ret < 0) {
+ dev_err(&dssdev->dev, "couldn't request reset GPIO\n");
+ goto fail_gpio_req;
+ }
+
+ ret = gpio_direction_output(nreset_gpio, 0);
+ if (ret < 0) {
+ dev_err(&dssdev->dev, "couldn't set GPIO direction\n");
+ goto fail_gpio_direction;
+ }
+ }
+
+ ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
+ if (ret)
+ dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+
+ return 0;
+
+fail_gpio_direction:
+ gpio_free(nreset_gpio);
+fail_gpio_req:
+ regulator_put(tpo_td043->vcc_reg);
+fail_regulator:
+ kfree(tpo_td043);
+ return ret;
+}
+
+static void tpo_td043_remove(struct omap_dss_device *dssdev)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ int nreset_gpio = dssdev->reset_gpio;
+
+ dev_dbg(&dssdev->dev, "remove\n");
+
+ sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
+ regulator_put(tpo_td043->vcc_reg);
+ if (gpio_is_valid(nreset_gpio))
+ gpio_free(nreset_gpio);
+}
+
+static struct omap_dss_driver tpo_td043_driver = {
+ .probe = tpo_td043_probe,
+ .remove = tpo_td043_remove,
+
+ .enable = tpo_td043_enable,
+ .disable = tpo_td043_disable,
+ .suspend = tpo_td043_suspend,
+ .resume = tpo_td043_resume,
+ .set_mirror = tpo_td043_set_hmirror,
+ .get_mirror = tpo_td043_get_hmirror,
+
+ .driver = {
+ .name = "tpo_td043mtea1_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int tpo_td043_spi_probe(struct spi_device *spi)
+{
+ struct omap_dss_device *dssdev = spi->dev.platform_data;
+ struct tpo_td043_device *tpo_td043;
+ int ret;
+
+ if (dssdev == NULL) {
+ dev_err(&spi->dev, "missing dssdev\n");
+ return -ENODEV;
+ }
+
+ spi->bits_per_word = 16;
+ spi->mode = SPI_MODE_0;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
+ return ret;
+ }
+
+ tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL);
+ if (tpo_td043 == NULL)
+ return -ENOMEM;
+
+ tpo_td043->spi = spi;
+ dev_set_drvdata(&spi->dev, tpo_td043);
+ dev_set_drvdata(&dssdev->dev, tpo_td043);
+
+ omap_dss_register_driver(&tpo_td043_driver);
+
+ return 0;
+}
+
+static int __devexit tpo_td043_spi_remove(struct spi_device *spi)
+{
+ struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev);
+
+ omap_dss_unregister_driver(&tpo_td043_driver);
+ kfree(tpo_td043);
+
+ return 0;
+}
+
+static struct spi_driver tpo_td043_spi_driver = {
+ .driver = {
+ .name = "tpo_td043mtea1_panel_spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = tpo_td043_spi_probe,
+ .remove = __devexit_p(tpo_td043_spi_remove),
+};
+
+static int __init tpo_td043_init(void)
+{
+ return spi_register_driver(&tpo_td043_spi_driver);
+}
+
+static void __exit tpo_td043_exit(void)
+{
+ spi_unregister_driver(&tpo_td043_spi_driver);
+}
+
+module_init(tpo_td043_init);
+module_exit(tpo_td043_exit);
+
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index c63ce76..87afb81 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -30,19 +30,29 @@
depends on OMAP2_DSS_DEBUG_SUPPORT
default n
help
- Collect DSS IRQ statistics, printable via debugfs
+ Collect DSS IRQ statistics, printable via debugfs.
+
+ The statistics can be found from
+ <debugfs>/omapdss/dispc_irq for DISPC interrupts, and
+ <debugfs>/omapdss/dsi_irq for DSI interrupts.
config OMAP2_DSS_RFBI
bool "RFBI support"
default n
help
- MIPI DBI, or RFBI (Remote Framebuffer Interface), support.
+ MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
+ Instrument's terminology).
+
+ DBI is a bus between the host processor and a peripheral,
+ such as a display or a framebuffer chip.
+
+ See http://www.mipi.org/ for DBI spesifications.
config OMAP2_DSS_VENC
bool "VENC support"
default y
help
- OMAP Video Encoder support.
+ OMAP Video Encoder support for S-Video and composite TV-out.
config OMAP2_DSS_SDI
bool "SDI support"
@@ -51,12 +61,20 @@
help
SDI (Serial Display Interface) support.
+ SDI is a high speed one-way display serial bus between the host
+ processor and a display.
+
config OMAP2_DSS_DSI
bool "DSI support"
depends on ARCH_OMAP3
default n
help
- MIPI DSI support.
+ MIPI DSI (Display Serial Interface) support.
+
+ DSI is a high speed half-duplex serial interface between the host
+ processor and a peripheral, such as a display or a framebuffer chip.
+
+ See http://www.mipi.org/ for DSI spesifications.
config OMAP2_DSS_USE_DSI_PLL
bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 82918ee..7ebe50b 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -31,6 +31,7 @@
#include <linux/debugfs.h>
#include <linux/io.h>
#include <linux/device.h>
+#include <linux/regulator/consumer.h>
#include <plat/display.h>
#include <plat/clock.h>
@@ -47,6 +48,10 @@
struct clk *dss_54m_fck;
struct clk *dss_96m_fck;
unsigned num_clks_enabled;
+
+ struct regulator *vdds_dsi_reg;
+ struct regulator *vdds_sdi_reg;
+ struct regulator *vdda_dac_reg;
} core;
static void dss_clk_enable_all_no_ctx(void);
@@ -284,9 +289,11 @@
void dss_clk_enable(enum dss_clock clks)
{
+ bool check_ctx = core.num_clks_enabled == 0;
+
dss_clk_enable_no_ctx(clks);
- if (cpu_is_omap34xx() && dss_need_ctx_restore())
+ if (check_ctx && cpu_is_omap34xx() && dss_need_ctx_restore())
restore_all_ctx();
}
@@ -352,6 +359,50 @@
dss_clk_disable(clks);
}
+/* REGULATORS */
+
+struct regulator *dss_get_vdds_dsi(void)
+{
+ struct regulator *reg;
+
+ if (core.vdds_dsi_reg != NULL)
+ return core.vdds_dsi_reg;
+
+ reg = regulator_get(&core.pdev->dev, "vdds_dsi");
+ if (!IS_ERR(reg))
+ core.vdds_dsi_reg = reg;
+
+ return reg;
+}
+
+struct regulator *dss_get_vdds_sdi(void)
+{
+ struct regulator *reg;
+
+ if (core.vdds_sdi_reg != NULL)
+ return core.vdds_sdi_reg;
+
+ reg = regulator_get(&core.pdev->dev, "vdds_sdi");
+ if (!IS_ERR(reg))
+ core.vdds_sdi_reg = reg;
+
+ return reg;
+}
+
+struct regulator *dss_get_vdda_dac(void)
+{
+ struct regulator *reg;
+
+ if (core.vdda_dac_reg != NULL)
+ return core.vdda_dac_reg;
+
+ reg = regulator_get(&core.pdev->dev, "vdda_dac");
+ if (!IS_ERR(reg))
+ core.vdda_dac_reg = reg;
+
+ return reg;
+}
+
/* DEBUGFS */
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
static void dss_debug_dump_clocks(struct seq_file *s)
@@ -397,10 +448,12 @@
debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
&dss_debug_dump_clocks, &dss_debug_fops);
+#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
debugfs_create_file("dispc_irq", S_IRUGO, dss_debugfs_dir,
&dispc_dump_irqs, &dss_debug_fops);
+#endif
-#ifdef CONFIG_OMAP2_DSS_DSI
+#if defined(CONFIG_OMAP2_DSS_DSI) && defined(CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS)
debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir,
&dsi_dump_irqs, &dss_debug_fops);
#endif
@@ -473,7 +526,7 @@
}
#endif
- r = dpi_init();
+ r = dpi_init(pdev);
if (r) {
DSSERR("Failed to initialize dpi\n");
goto fail0;
@@ -718,16 +771,14 @@
dss_init_device(core.pdev, dssdev);
- /* skip this if the device is behind a ctrl */
- if (!dssdev->panel.ctrl) {
- force = pdata->default_device == dssdev;
- dss_recheck_connections(dssdev, force);
- }
+ force = pdata->default_device == dssdev;
+ dss_recheck_connections(dssdev, force);
r = dssdrv->probe(dssdev);
if (r) {
DSSERR("driver probe failed: %d\n", r);
+ dss_uninit_device(core.pdev, dssdev);
return r;
}
@@ -760,6 +811,13 @@
dssdriver->driver.bus = &dss_bus_type;
dssdriver->driver.probe = dss_driver_probe;
dssdriver->driver.remove = dss_driver_remove;
+
+ if (dssdriver->get_resolution == NULL)
+ dssdriver->get_resolution = omapdss_default_get_resolution;
+ if (dssdriver->get_recommended_bpp == NULL)
+ dssdriver->get_recommended_bpp =
+ omapdss_default_get_recommended_bpp;
+
return driver_register(&dssdriver->driver);
}
EXPORT_SYMBOL(omap_dss_register_driver);
@@ -808,8 +866,6 @@
int omap_dss_register_device(struct omap_dss_device *dssdev)
{
static int dev_num;
- static int panel_num;
- int r;
WARN_ON(!dssdev->driver_name);
@@ -818,36 +874,12 @@
dssdev->dev.parent = &dss_bus;
dssdev->dev.release = omap_dss_dev_release;
dev_set_name(&dssdev->dev, "display%d", dev_num++);
- r = device_register(&dssdev->dev);
- if (r)
- return r;
-
- if (dssdev->ctrl.panel) {
- struct omap_dss_device *panel = dssdev->ctrl.panel;
-
- panel->panel.ctrl = dssdev;
-
- reset_device(&panel->dev, 1);
- panel->dev.bus = &dss_bus_type;
- panel->dev.parent = &dssdev->dev;
- panel->dev.release = omap_dss_dev_release;
- dev_set_name(&panel->dev, "panel%d", panel_num++);
- r = device_register(&panel->dev);
- if (r)
- return r;
- }
-
- return 0;
+ return device_register(&dssdev->dev);
}
void omap_dss_unregister_device(struct omap_dss_device *dssdev)
{
device_unregister(&dssdev->dev);
-
- if (dssdev->ctrl.panel) {
- struct omap_dss_device *panel = dssdev->ctrl.panel;
- device_unregister(&panel->dev);
- }
}
/* BUS */
@@ -901,6 +933,21 @@
static void __exit omap_dss_exit(void)
{
+ if (core.vdds_dsi_reg != NULL) {
+ regulator_put(core.vdds_dsi_reg);
+ core.vdds_dsi_reg = NULL;
+ }
+
+ if (core.vdds_sdi_reg != NULL) {
+ regulator_put(core.vdds_sdi_reg);
+ core.vdds_sdi_reg = NULL;
+ }
+
+ if (core.vdda_dac_reg != NULL) {
+ regulator_put(core.vdda_dac_reg);
+ core.vdda_dac_reg = NULL;
+ }
+
platform_driver_unregister(&omap_dss_driver);
omap_dss_bus_unregister();
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index de8bfba..e777e35 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1725,7 +1725,7 @@
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
}
-void dispc_enable_lcd_out(bool enable)
+static void dispc_enable_lcd_out(bool enable)
{
struct completion frame_done_completion;
bool is_on;
@@ -1772,7 +1772,7 @@
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
}
-void dispc_enable_digit_out(bool enable)
+static void dispc_enable_digit_out(bool enable)
{
struct completion frame_done_completion;
int r;
@@ -1836,6 +1836,26 @@
enable_clocks(0);
}
+bool dispc_is_channel_enabled(enum omap_channel channel)
+{
+ if (channel == OMAP_DSS_CHANNEL_LCD)
+ return !!REG_GET(DISPC_CONTROL, 0, 0);
+ else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+ return !!REG_GET(DISPC_CONTROL, 1, 1);
+ else
+ BUG();
+}
+
+void dispc_enable_channel(enum omap_channel channel, bool enable)
+{
+ if (channel == OMAP_DSS_CHANNEL_LCD)
+ dispc_enable_lcd_out(enable);
+ else if (channel == OMAP_DSS_CHANNEL_DIGIT)
+ dispc_enable_digit_out(enable);
+ else
+ BUG();
+}
+
void dispc_lcd_enable_signal_polarity(bool act_high)
{
enable_clocks(1);
@@ -2198,7 +2218,7 @@
{
unsigned long r = 0;
- if (dss_get_dispc_clk_source() == 0)
+ if (dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK)
r = dss_clk_get_rate(DSS_CLK_FCK1);
else
#ifdef CONFIG_OMAP2_DSS_DSI
@@ -2251,7 +2271,7 @@
seq_printf(s, "- DISPC -\n");
seq_printf(s, "dispc fclk source = %s\n",
- dss_get_dispc_clk_source() == 0 ?
+ dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
"dss1_alwon_fclk" : "dsi1_pll_fclk");
seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate());
@@ -2301,8 +2321,6 @@
PIS(WAKEUP);
#undef PIS
}
-#else
-void dispc_dump_irqs(struct seq_file *s) { }
#endif
void dispc_dump_regs(struct seq_file *s)
@@ -2854,12 +2872,13 @@
manager = mgr;
enable = mgr->device->state ==
OMAP_DSS_DISPLAY_ACTIVE;
- mgr->device->disable(mgr->device);
+ mgr->device->driver->disable(mgr->device);
break;
}
}
if (manager) {
+ struct omap_dss_device *dssdev = manager->device;
for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
struct omap_overlay *ovl;
ovl = omap_dss_get_overlay(i);
@@ -2874,7 +2893,7 @@
dispc_go(manager->id);
mdelay(50);
if (enable)
- manager->device->enable(manager->device);
+ dssdev->driver->enable(dssdev);
}
}
@@ -2892,12 +2911,13 @@
manager = mgr;
enable = mgr->device->state ==
OMAP_DSS_DISPLAY_ACTIVE;
- mgr->device->disable(mgr->device);
+ mgr->device->driver->disable(mgr->device);
break;
}
}
if (manager) {
+ struct omap_dss_device *dssdev = manager->device;
for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
struct omap_overlay *ovl;
ovl = omap_dss_get_overlay(i);
@@ -2912,7 +2932,7 @@
dispc_go(manager->id);
mdelay(50);
if (enable)
- manager->device->enable(manager->device);
+ dssdev->driver->enable(dssdev);
}
}
@@ -2923,7 +2943,7 @@
mgr = omap_dss_get_overlay_manager(i);
if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
- mgr->device->disable(mgr->device);
+ mgr->device->driver->disable(mgr->device);
}
}
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 3b92b84..6a74ea1 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -53,11 +53,11 @@
if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) {
if (enabled) {
- r = dssdev->enable(dssdev);
+ r = dssdev->driver->enable(dssdev);
if (r)
return r;
} else {
- dssdev->disable(dssdev);
+ dssdev->driver->disable(dssdev);
}
}
@@ -69,8 +69,8 @@
{
struct omap_dss_device *dssdev = to_dss_device(dev);
enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO;
- if (dssdev->get_update_mode)
- mode = dssdev->get_update_mode(dssdev);
+ if (dssdev->driver->get_update_mode)
+ mode = dssdev->driver->get_update_mode(dssdev);
return snprintf(buf, PAGE_SIZE, "%d\n", mode);
}
@@ -94,7 +94,7 @@
return -EINVAL;
}
- r = dssdev->set_update_mode(dssdev, mode);
+ r = dssdev->driver->set_update_mode(dssdev, mode);
if (r)
return r;
@@ -106,7 +106,8 @@
{
struct omap_dss_device *dssdev = to_dss_device(dev);
return snprintf(buf, PAGE_SIZE, "%d\n",
- dssdev->get_te ? dssdev->get_te(dssdev) : 0);
+ dssdev->driver->get_te ?
+ dssdev->driver->get_te(dssdev) : 0);
}
static ssize_t display_tear_store(struct device *dev,
@@ -116,12 +117,12 @@
unsigned long te;
int r;
- if (!dssdev->enable_te || !dssdev->get_te)
+ if (!dssdev->driver->enable_te || !dssdev->driver->get_te)
return -ENOENT;
te = simple_strtoul(buf, NULL, 0);
- r = dssdev->enable_te(dssdev, te);
+ r = dssdev->driver->enable_te(dssdev, te);
if (r)
return r;
@@ -134,10 +135,10 @@
struct omap_dss_device *dssdev = to_dss_device(dev);
struct omap_video_timings t;
- if (!dssdev->get_timings)
+ if (!dssdev->driver->get_timings)
return -ENOENT;
- dssdev->get_timings(dssdev, &t);
+ dssdev->driver->get_timings(dssdev, &t);
return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
t.pixel_clock,
@@ -152,7 +153,7 @@
struct omap_video_timings t;
int r, found;
- if (!dssdev->set_timings || !dssdev->check_timings)
+ if (!dssdev->driver->set_timings || !dssdev->driver->check_timings)
return -ENOENT;
found = 0;
@@ -171,11 +172,11 @@
&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
return -EINVAL;
- r = dssdev->check_timings(dssdev, &t);
+ r = dssdev->driver->check_timings(dssdev, &t);
if (r)
return r;
- dssdev->set_timings(dssdev, &t);
+ dssdev->driver->set_timings(dssdev, &t);
return size;
}
@@ -185,9 +186,9 @@
{
struct omap_dss_device *dssdev = to_dss_device(dev);
int rotate;
- if (!dssdev->get_rotate)
+ if (!dssdev->driver->get_rotate)
return -ENOENT;
- rotate = dssdev->get_rotate(dssdev);
+ rotate = dssdev->driver->get_rotate(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
}
@@ -198,12 +199,12 @@
unsigned long rot;
int r;
- if (!dssdev->set_rotate || !dssdev->get_rotate)
+ if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
return -ENOENT;
rot = simple_strtoul(buf, NULL, 0);
- r = dssdev->set_rotate(dssdev, rot);
+ r = dssdev->driver->set_rotate(dssdev, rot);
if (r)
return r;
@@ -215,9 +216,9 @@
{
struct omap_dss_device *dssdev = to_dss_device(dev);
int mirror;
- if (!dssdev->get_mirror)
+ if (!dssdev->driver->get_mirror)
return -ENOENT;
- mirror = dssdev->get_mirror(dssdev);
+ mirror = dssdev->driver->get_mirror(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
}
@@ -228,12 +229,12 @@
unsigned long mirror;
int r;
- if (!dssdev->set_mirror || !dssdev->get_mirror)
+ if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
return -ENOENT;
mirror = simple_strtoul(buf, NULL, 0);
- r = dssdev->set_mirror(dssdev, mirror);
+ r = dssdev->driver->set_mirror(dssdev, mirror);
if (r)
return r;
@@ -246,10 +247,10 @@
struct omap_dss_device *dssdev = to_dss_device(dev);
unsigned int wss;
- if (!dssdev->get_wss)
+ if (!dssdev->driver->get_wss)
return -ENOENT;
- wss = dssdev->get_wss(dssdev);
+ wss = dssdev->driver->get_wss(dssdev);
return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
}
@@ -261,7 +262,7 @@
unsigned long wss;
int r;
- if (!dssdev->get_wss || !dssdev->set_wss)
+ if (!dssdev->driver->get_wss || !dssdev->driver->set_wss)
return -ENOENT;
if (strict_strtoul(buf, 0, &wss))
@@ -270,7 +271,7 @@
if (wss > 0xfffff)
return -EINVAL;
- r = dssdev->set_wss(dssdev, wss);
+ r = dssdev->driver->set_wss(dssdev, wss);
if (r)
return r;
@@ -303,12 +304,13 @@
NULL
};
-static void default_get_resolution(struct omap_dss_device *dssdev,
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres)
{
*xres = dssdev->panel.timings.x_res;
*yres = dssdev->panel.timings.y_res;
}
+EXPORT_SYMBOL(omapdss_default_get_resolution);
void default_get_overlay_fifo_thresholds(enum omap_plane plane,
u32 fifo_size, enum omap_burst_size *burst_size,
@@ -323,24 +325,8 @@
*fifo_low = fifo_size - burst_size_bytes;
}
-static int default_wait_vsync(struct omap_dss_device *dssdev)
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
{
- unsigned long timeout = msecs_to_jiffies(500);
- u32 irq;
-
- if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
- irq = DISPC_IRQ_EVSYNC_ODD;
- else
- irq = DISPC_IRQ_VSYNC;
-
- return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
-}
-
-static int default_get_recommended_bpp(struct omap_dss_device *dssdev)
-{
- if (dssdev->panel.recommended_bpp)
- return dssdev->panel.recommended_bpp;
-
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_DPI:
if (dssdev->phy.dpi.data_lines == 24)
@@ -362,6 +348,7 @@
BUG();
}
}
+EXPORT_SYMBOL(omapdss_default_get_recommended_bpp);
/* Checks if replication logic should be used. Only use for active matrix,
* when overlay is in RGB12U or RGB16 mode, and LCD interface is
@@ -425,10 +412,6 @@
return;
}
- dssdev->get_resolution = default_get_resolution;
- dssdev->get_recommended_bpp = default_get_recommended_bpp;
- dssdev->wait_vsync = default_wait_vsync;
-
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_DPI:
r = dpi_init_display(dssdev);
@@ -502,13 +485,13 @@
return 0;
}
- if (!dssdev->suspend) {
+ if (!dssdev->driver->suspend) {
DSSERR("display '%s' doesn't implement suspend\n",
dssdev->name);
return -ENOSYS;
}
- r = dssdev->suspend(dssdev);
+ r = dssdev->driver->suspend(dssdev);
if (r)
return r;
@@ -537,8 +520,8 @@
int r;
struct omap_dss_device *dssdev = to_dss_device(dev);
- if (dssdev->activate_after_resume && dssdev->resume) {
- r = dssdev->resume(dssdev);
+ if (dssdev->activate_after_resume && dssdev->driver->resume) {
+ r = dssdev->driver->resume(dssdev);
if (r)
return r;
}
@@ -558,7 +541,7 @@
static int dss_disable_device(struct device *dev, void *data)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
- dssdev->disable(dssdev);
+ dssdev->driver->disable(dssdev);
return 0;
}
@@ -591,10 +574,6 @@
int match(struct device *dev, void *data)
{
- /* skip panels connected to controllers */
- if (to_dss_device(dev)->panel.ctrl)
- return 0;
-
return 1;
}
@@ -626,45 +605,21 @@
int omap_dss_start_device(struct omap_dss_device *dssdev)
{
- int r;
-
if (!dssdev->driver) {
DSSDBG("no driver\n");
- r = -ENODEV;
- goto err0;
- }
-
- if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) {
- DSSDBG("no panel driver\n");
- r = -ENODEV;
- goto err0;
+ return -ENODEV;
}
if (!try_module_get(dssdev->dev.driver->owner)) {
- r = -ENODEV;
- goto err0;
- }
-
- if (dssdev->ctrl.panel) {
- if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) {
- r = -ENODEV;
- goto err1;
- }
+ return -ENODEV;
}
return 0;
-err1:
- module_put(dssdev->dev.driver->owner);
-err0:
- return r;
}
EXPORT_SYMBOL(omap_dss_start_device);
void omap_dss_stop_device(struct omap_dss_device *dssdev)
{
- if (dssdev->ctrl.panel)
- module_put(dssdev->ctrl.panel->dev.driver->owner);
-
module_put(dssdev->dev.driver->owner);
}
EXPORT_SYMBOL(omap_dss_stop_device);
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 2d71031..960e977 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -25,7 +25,10 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/err.h>
#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <plat/display.h>
#include <plat/cpu.h>
@@ -33,7 +36,7 @@
#include "dss.h"
static struct {
- int update_enabled;
+ struct regulator *vdds_dsi_reg;
} dpi;
#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
@@ -53,7 +56,7 @@
if (r)
return r;
- dss_select_clk_source(0, 1);
+ dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK);
r = dispc_set_clock_div(&dispc_cinfo);
if (r)
@@ -150,7 +153,7 @@
return 0;
}
-static int dpi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -160,10 +163,10 @@
goto err0;
}
- if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
- DSSERR("display already enabled\n");
- r = -EINVAL;
- goto err1;
+ if (cpu_is_omap34xx()) {
+ r = regulator_enable(dpi.vdds_dsi_reg);
+ if (r)
+ goto err1;
}
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -184,18 +187,10 @@
mdelay(2);
- dispc_enable_lcd_out(1);
-
- r = dssdev->driver->enable(dssdev);
- if (r)
- goto err5;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ dssdev->manager->enable(dssdev->manager);
return 0;
-err5:
- dispc_enable_lcd_out(0);
err4:
#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
dsi_pll_uninit();
@@ -204,78 +199,35 @@
#endif
err2:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+ if (cpu_is_omap34xx())
+ regulator_disable(dpi.vdds_dsi_reg);
err1:
omap_dss_stop_device(dssdev);
err0:
return r;
}
+EXPORT_SYMBOL(omapdss_dpi_display_enable);
-static int dpi_display_resume(struct omap_dss_device *dssdev);
-
-static void dpi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
{
- if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
- return;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
- dpi_display_resume(dssdev);
-
- dssdev->driver->disable(dssdev);
-
- dispc_enable_lcd_out(0);
+ dssdev->manager->disable(dssdev->manager);
#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
- dss_select_clk_source(0, 0);
+ dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
dsi_pll_uninit();
dss_clk_disable(DSS_CLK_FCK2);
#endif
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+ if (cpu_is_omap34xx())
+ regulator_disable(dpi.vdds_dsi_reg);
omap_dss_stop_device(dssdev);
}
+EXPORT_SYMBOL(omapdss_dpi_display_disable);
-static int dpi_display_suspend(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return -EINVAL;
-
- DSSDBG("dpi_display_suspend\n");
-
- if (dssdev->driver->suspend)
- dssdev->driver->suspend(dssdev);
-
- dispc_enable_lcd_out(0);
-
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
- return 0;
-}
-
-static int dpi_display_resume(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
- return -EINVAL;
-
- DSSDBG("dpi_display_resume\n");
-
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
- dispc_enable_lcd_out(1);
-
- if (dssdev->driver->resume)
- dssdev->driver->resume(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-}
-
-static void dpi_set_timings(struct omap_dss_device *dssdev,
+void dpi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
DSSDBG("dpi_set_timings\n");
@@ -285,8 +237,9 @@
dispc_go(OMAP_DSS_CHANNEL_LCD);
}
}
+EXPORT_SYMBOL(dpi_set_timings);
-static int dpi_check_timings(struct omap_dss_device *dssdev,
+int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
bool is_tft;
@@ -340,56 +293,25 @@
return 0;
}
-
-static void dpi_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
-
-static int dpi_display_set_update_mode(struct omap_dss_device *dssdev,
- enum omap_dss_update_mode mode)
-{
- if (mode == OMAP_DSS_UPDATE_MANUAL)
- return -EINVAL;
-
- if (mode == OMAP_DSS_UPDATE_DISABLED) {
- dispc_enable_lcd_out(0);
- dpi.update_enabled = 0;
- } else {
- dispc_enable_lcd_out(1);
- dpi.update_enabled = 1;
- }
-
- return 0;
-}
-
-static enum omap_dss_update_mode dpi_display_get_update_mode(
- struct omap_dss_device *dssdev)
-{
- return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
- OMAP_DSS_UPDATE_DISABLED;
-}
+EXPORT_SYMBOL(dpi_check_timings);
int dpi_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("init_display\n");
- dssdev->enable = dpi_display_enable;
- dssdev->disable = dpi_display_disable;
- dssdev->suspend = dpi_display_suspend;
- dssdev->resume = dpi_display_resume;
- dssdev->set_timings = dpi_set_timings;
- dssdev->check_timings = dpi_check_timings;
- dssdev->get_timings = dpi_get_timings;
- dssdev->set_update_mode = dpi_display_set_update_mode;
- dssdev->get_update_mode = dpi_display_get_update_mode;
-
return 0;
}
-int dpi_init(void)
+int dpi_init(struct platform_device *pdev)
{
+ if (cpu_is_omap34xx()) {
+ dpi.vdds_dsi_reg = dss_get_vdds_dsi();
+ if (IS_ERR(dpi.vdds_dsi_reg)) {
+ DSSERR("can't get VDDS_DSI regulator\n");
+ return PTR_ERR(dpi.vdds_dsi_reg);
+ }
+ }
+
return 0;
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 6122178..3af207b 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -27,11 +27,12 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/semaphore.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
-#include <linux/kthread.h>
#include <linux/wait.h>
+#include <linux/workqueue.h>
#include <plat/display.h>
#include <plat/clock.h>
@@ -199,7 +200,6 @@
};
struct dsi_update_region {
- bool dirty;
u16 x, y, w, h;
struct omap_dss_device *device;
};
@@ -224,29 +224,25 @@
enum dsi_vc_mode mode;
struct omap_dss_device *dssdev;
enum fifo_size fifo_size;
- int dest_per; /* destination peripheral 0-3 */
} vc[4];
struct mutex lock;
- struct mutex bus_lock;
+ struct semaphore bus_lock;
unsigned pll_locked;
struct completion bta_completion;
- struct task_struct *thread;
- wait_queue_head_t waitqueue;
-
- spinlock_t update_lock;
- bool framedone_received;
+ int update_channel;
struct dsi_update_region update_region;
- struct dsi_update_region active_update_region;
- struct completion update_completion;
- enum omap_dss_update_mode user_update_mode;
- enum omap_dss_update_mode update_mode;
bool te_enabled;
- bool use_ext_te;
+
+ struct work_struct framedone_work;
+ void (*framedone_callback)(int, void *);
+ void *framedone_data;
+
+ struct delayed_work framedone_timeout_work;
#ifdef DSI_CATCH_MISSING_TE
struct timer_list te_timer;
@@ -261,8 +257,6 @@
#ifdef DEBUG
ktime_t perf_setup_time;
ktime_t perf_start_time;
- ktime_t perf_start_time_auto;
- int perf_measure_frames;
#endif
int debug_read;
int debug_write;
@@ -299,16 +293,21 @@
void dsi_bus_lock(void)
{
- mutex_lock(&dsi.bus_lock);
+ down(&dsi.bus_lock);
}
EXPORT_SYMBOL(dsi_bus_lock);
void dsi_bus_unlock(void)
{
- mutex_unlock(&dsi.bus_lock);
+ up(&dsi.bus_lock);
}
EXPORT_SYMBOL(dsi_bus_unlock);
+static bool dsi_bus_is_locked(void)
+{
+ return dsi.bus_lock.count == 0;
+}
+
static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum,
int value)
{
@@ -333,12 +332,6 @@
dsi.perf_start_time = ktime_get();
}
-static void dsi_perf_mark_start_auto(void)
-{
- dsi.perf_measure_frames = 0;
- dsi.perf_start_time_auto = ktime_get();
-}
-
static void dsi_perf_show(const char *name)
{
ktime_t t, setup_time, trans_time;
@@ -348,9 +341,6 @@
if (!dsi_perf)
return;
- if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
- return;
-
t = ktime_get();
setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time);
@@ -365,76 +355,23 @@
total_us = setup_us + trans_us;
- total_bytes = dsi.active_update_region.w *
- dsi.active_update_region.h *
- dsi.active_update_region.device->ctrl.pixel_size / 8;
+ total_bytes = dsi.update_region.w *
+ dsi.update_region.h *
+ dsi.update_region.device->ctrl.pixel_size / 8;
- if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
- static u32 s_total_trans_us, s_total_setup_us;
- static u32 s_min_trans_us = 0xffffffff, s_min_setup_us;
- static u32 s_max_trans_us, s_max_setup_us;
- const int numframes = 100;
- ktime_t total_time_auto;
- u32 total_time_auto_us;
-
- dsi.perf_measure_frames++;
-
- if (setup_us < s_min_setup_us)
- s_min_setup_us = setup_us;
-
- if (setup_us > s_max_setup_us)
- s_max_setup_us = setup_us;
-
- s_total_setup_us += setup_us;
-
- if (trans_us < s_min_trans_us)
- s_min_trans_us = trans_us;
-
- if (trans_us > s_max_trans_us)
- s_max_trans_us = trans_us;
-
- s_total_trans_us += trans_us;
-
- if (dsi.perf_measure_frames < numframes)
- return;
-
- total_time_auto = ktime_sub(t, dsi.perf_start_time_auto);
- total_time_auto_us = (u32)ktime_to_us(total_time_auto);
-
- printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, "
- "trans %u/%u/%u\n",
- name,
- 1000 * 1000 * numframes / total_time_auto_us,
- s_min_setup_us,
- s_max_setup_us,
- s_total_setup_us / numframes,
- s_min_trans_us,
- s_max_trans_us,
- s_total_trans_us / numframes);
-
- s_total_setup_us = 0;
- s_min_setup_us = 0xffffffff;
- s_max_setup_us = 0;
- s_total_trans_us = 0;
- s_min_trans_us = 0xffffffff;
- s_max_trans_us = 0;
- dsi_perf_mark_start_auto();
- } else {
- printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
- "%u bytes, %u kbytes/sec\n",
- name,
- setup_us,
- trans_us,
- total_us,
- 1000*1000 / total_us,
- total_bytes,
- total_bytes * 1000 / total_us);
- }
+ printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
+ "%u bytes, %u kbytes/sec\n",
+ name,
+ setup_us,
+ trans_us,
+ total_us,
+ 1000*1000 / total_us,
+ total_bytes,
+ total_bytes * 1000 / total_us);
}
#else
#define dsi_perf_mark_setup()
#define dsi_perf_mark_start()
-#define dsi_perf_mark_start_auto()
#define dsi_perf_show(x)
#endif
@@ -774,7 +711,7 @@
{
unsigned long r;
- if (dss_get_dsi_clk_source() == 0) {
+ if (dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK) {
/* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */
r = dss_clk_get_rate(DSS_CLK_FCK1);
} else {
@@ -1227,17 +1164,19 @@
seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n",
cinfo->dsi1_pll_fclk,
cinfo->regm3,
- dss_get_dispc_clk_source() == 0 ? "off" : "on");
+ dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
+ "off" : "on");
seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n",
cinfo->dsi2_pll_fclk,
cinfo->regm4,
- dss_get_dsi_clk_source() == 0 ? "off" : "on");
+ dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
+ "off" : "on");
seq_printf(s, "- DSI -\n");
seq_printf(s, "dsi fclk source = %s\n",
- dss_get_dsi_clk_source() == 0 ?
+ dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ?
"dss1_alwon_fclk" : "dsi2_pll_fclk");
seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate());
@@ -1756,29 +1695,10 @@
return 0;
}
-static void dsi_vc_print_status(int channel)
-{
- u32 r;
-
- r = dsi_read_reg(DSI_VC_CTRL(channel));
- DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, "
- "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ",
- channel,
- FLD_GET(r, 5, 5),
- FLD_GET(r, 6, 6),
- FLD_GET(r, 15, 15),
- FLD_GET(r, 16, 16),
- FLD_GET(r, 20, 20));
-
- r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS);
- DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff);
-}
-
static int dsi_vc_enable(int channel, bool enable)
{
- if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
- DSSDBG("dsi_vc_enable channel %d, enable %d\n",
- channel, enable);
+ DSSDBG("dsi_vc_enable channel %d, enable %d\n",
+ channel, enable);
enable = enable ? 1 : 0;
@@ -1859,10 +1779,12 @@
}
-static void dsi_vc_enable_hs(int channel, bool enable)
+void omapdss_dsi_vc_enable_hs(int channel, bool enable)
{
DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
+ WARN_ON(!dsi_bus_is_locked());
+
dsi_vc_enable(channel, 0);
dsi_if_enable(0);
@@ -1873,6 +1795,7 @@
dsi_force_tx_stop_mode_io();
}
+EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
static void dsi_vc_flush_long_data(int channel)
{
@@ -1955,11 +1878,10 @@
static int dsi_vc_send_bta(int channel)
{
- if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO &&
- (dsi.debug_write || dsi.debug_read))
+ if (dsi.debug_write || dsi.debug_read)
DSSDBG("dsi_vc_send_bta %d\n", channel);
- WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+ WARN_ON(!dsi_bus_is_locked());
if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */
DSSERR("rx fifo not empty when sending BTA, dumping data:\n");
@@ -2010,10 +1932,9 @@
u32 val;
u8 data_id;
- WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+ WARN_ON(!dsi_bus_is_locked());
- /*data_id = data_type | channel << 6; */
- data_id = data_type | dsi.vc[channel].dest_per << 6;
+ data_id = data_type | channel << 6;
val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
FLD_VAL(ecc, 31, 24);
@@ -2056,13 +1977,10 @@
dsi_vc_write_long_header(channel, data_type, len, ecc);
- /*dsi_vc_print_status(0); */
-
p = data;
for (i = 0; i < len >> 2; i++) {
if (dsi.debug_write)
DSSDBG("\tsending full packet %d\n", i);
- /*dsi_vc_print_status(0); */
b1 = *p++;
b2 = *p++;
@@ -2105,7 +2023,7 @@
u32 r;
u8 data_id;
- WARN_ON(!mutex_is_locked(&dsi.bus_lock));
+ WARN_ON(!dsi_bus_is_locked());
if (dsi.debug_write)
DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
@@ -2119,7 +2037,7 @@
return -EINVAL;
}
- data_id = data_type | dsi.vc[channel].dest_per << 6;
+ data_id = data_type | channel << 6;
r = (data_id << 0) | (data << 8) | (ecc << 24);
@@ -2163,14 +2081,35 @@
r = dsi_vc_dcs_write_nosync(channel, data, len);
if (r)
- return r;
+ goto err;
r = dsi_vc_send_bta_sync(channel);
+ if (r)
+ goto err;
+ return 0;
+err:
+ DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
+ channel, data[0], len);
return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_write);
+int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd)
+{
+ return dsi_vc_dcs_write(channel, &dcs_cmd, 1);
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write_0);
+
+int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param)
+{
+ u8 buf[2];
+ buf[0] = dcs_cmd;
+ buf[1] = param;
+ return dsi_vc_dcs_write(channel, buf, 2);
+}
+EXPORT_SYMBOL(dsi_vc_dcs_write_1);
+
int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen)
{
u32 val;
@@ -2182,16 +2121,17 @@
r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
if (r)
- return r;
+ goto err;
r = dsi_vc_send_bta_sync(channel);
if (r)
- return r;
+ goto err;
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) {
DSSERR("RX fifo empty when trying to read.\n");
- return -EIO;
+ r = -EIO;
+ goto err;
}
val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
@@ -2201,15 +2141,18 @@
if (dt == DSI_DT_RX_ACK_WITH_ERR) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
- return -EIO;
+ r = -EIO;
+ goto err;
} else if (dt == DSI_DT_RX_SHORT_READ_1) {
u8 data = FLD_GET(val, 15, 8);
if (dsi.debug_read)
DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
- if (buflen < 1)
- return -EIO;
+ if (buflen < 1) {
+ r = -EIO;
+ goto err;
+ }
buf[0] = data;
@@ -2219,8 +2162,10 @@
if (dsi.debug_read)
DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
- if (buflen < 2)
- return -EIO;
+ if (buflen < 2) {
+ r = -EIO;
+ goto err;
+ }
buf[0] = data & 0xff;
buf[1] = (data >> 8) & 0xff;
@@ -2232,8 +2177,10 @@
if (dsi.debug_read)
DSSDBG("\tDCS long response, len %d\n", len);
- if (len > buflen)
- return -EIO;
+ if (len > buflen) {
+ r = -EIO;
+ goto err;
+ }
/* two byte checksum ends the packet, not included in len */
for (w = 0; w < len + 2;) {
@@ -2255,14 +2202,52 @@
}
return len;
-
} else {
DSSERR("\tunknown datatype 0x%02x\n", dt);
- return -EIO;
+ r = -EIO;
+ goto err;
}
+
+ BUG();
+err:
+ DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n",
+ channel, dcs_cmd);
+ return r;
+
}
EXPORT_SYMBOL(dsi_vc_dcs_read);
+int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data)
+{
+ int r;
+
+ r = dsi_vc_dcs_read(channel, dcs_cmd, data, 1);
+
+ if (r < 0)
+ return r;
+
+ if (r != 1)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_read_1);
+
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
+{
+ int r;
+
+ r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2);
+
+ if (r < 0)
+ return r;
+
+ if (r != 2)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL(dsi_vc_dcs_read_2);
int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
{
@@ -2491,15 +2476,15 @@
u32 r;
int buswidth = 0;
- dsi_config_tx_fifo(DSI_FIFO_SIZE_128,
- DSI_FIFO_SIZE_0,
- DSI_FIFO_SIZE_0,
- DSI_FIFO_SIZE_0);
+ dsi_config_tx_fifo(DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32);
- dsi_config_rx_fifo(DSI_FIFO_SIZE_128,
- DSI_FIFO_SIZE_0,
- DSI_FIFO_SIZE_0,
- DSI_FIFO_SIZE_0);
+ dsi_config_rx_fifo(DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32,
+ DSI_FIFO_SIZE_32);
/* XXX what values for the timeouts? */
dsi_set_stop_state_counter(1000);
@@ -2537,12 +2522,9 @@
dsi_write_reg(DSI_CTRL, r);
dsi_vc_initial_config(0);
-
- /* set all vc targets to peripheral 0 */
- dsi.vc[0].dest_per = 0;
- dsi.vc[1].dest_per = 0;
- dsi.vc[2].dest_per = 0;
- dsi.vc[3].dest_per = 0;
+ dsi_vc_initial_config(1);
+ dsi_vc_initial_config(2);
+ dsi_vc_initial_config(3);
return 0;
}
@@ -2777,18 +2759,16 @@
unsigned packet_payload;
unsigned packet_len;
u32 l;
- bool use_te_trigger;
- const unsigned channel = 0;
+ const unsigned channel = dsi.update_channel;
/* line buffer is 1024 x 24bits */
/* XXX: for some reason using full buffer size causes considerable TX
* slowdown with update sizes that fill the whole buffer */
const unsigned line_buf_size = 1023 * 3;
- use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
+ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
+ x, y, w, h);
- if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
- DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
- x, y, w, h);
+ dsi_vc_config_vp(channel);
bytespp = dssdev->ctrl.pixel_size / 8;
bytespl = w * bytespp;
@@ -2808,15 +2788,12 @@
if (bytespf % packet_payload)
total_len += (bytespf % packet_payload) + 1;
- if (0)
- dsi_vc_print_status(1);
-
l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
dsi_write_reg(DSI_VC_TE(channel), l);
dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0);
- if (use_te_trigger)
+ if (dsi.te_enabled)
l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
else
l = FLD_MOD(l, 1, 31, 31); /* TE_START */
@@ -2830,9 +2807,14 @@
*/
dispc_disable_sidle();
+ dsi_perf_mark_start();
+
+ schedule_delayed_work(&dsi.framedone_timeout_work,
+ msecs_to_jiffies(250));
+
dss_start_update(dssdev);
- if (use_te_trigger) {
+ if (dsi.te_enabled) {
/* disable LP_RX_TO, so that we can receive TE. Time to wait
* for TE is longer than the timer allows */
REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
@@ -2852,110 +2834,17 @@
}
#endif
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
{
- /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
- * turns itself off. However, DSI still has the pixels in its buffers,
- * and is sending the data.
- */
+ int r;
+ const int channel = dsi.update_channel;
+
+ DSSERR("Framedone not received for 250ms!\n");
/* SIDLEMODE back to smart-idle */
dispc_enable_sidle();
- dsi.framedone_received = true;
- wake_up(&dsi.waitqueue);
-}
-
-static void dsi_set_update_region(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- spin_lock(&dsi.update_lock);
- if (dsi.update_region.dirty) {
- dsi.update_region.x = min(x, dsi.update_region.x);
- dsi.update_region.y = min(y, dsi.update_region.y);
- dsi.update_region.w = max(w, dsi.update_region.w);
- dsi.update_region.h = max(h, dsi.update_region.h);
- } else {
- dsi.update_region.x = x;
- dsi.update_region.y = y;
- dsi.update_region.w = w;
- dsi.update_region.h = h;
- }
-
- dsi.update_region.device = dssdev;
- dsi.update_region.dirty = true;
-
- spin_unlock(&dsi.update_lock);
-
-}
-
-static int dsi_set_update_mode(struct omap_dss_device *dssdev,
- enum omap_dss_update_mode mode)
-{
- int r = 0;
- int i;
-
- WARN_ON(!mutex_is_locked(&dsi.bus_lock));
-
- if (dsi.update_mode != mode) {
- dsi.update_mode = mode;
-
- /* Mark the overlays dirty, and do apply(), so that we get the
- * overlays configured properly after update mode change. */
- for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
- struct omap_overlay *ovl;
- ovl = omap_dss_get_overlay(i);
- if (ovl->manager == dssdev->manager)
- ovl->info_dirty = true;
- }
-
- r = dssdev->manager->apply(dssdev->manager);
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE &&
- mode == OMAP_DSS_UPDATE_AUTO) {
- u16 w, h;
-
- DSSDBG("starting auto update\n");
-
- dssdev->get_resolution(dssdev, &w, &h);
-
- dsi_set_update_region(dssdev, 0, 0, w, h);
-
- dsi_perf_mark_start_auto();
-
- wake_up(&dsi.waitqueue);
- }
- }
-
- return r;
-}
-
-static int dsi_set_te(struct omap_dss_device *dssdev, bool enable)
-{
- int r = 0;
-
- if (dssdev->driver->enable_te) {
- r = dssdev->driver->enable_te(dssdev, enable);
- /* XXX for some reason, DSI TE breaks if we don't wait here.
- * Panel bug? Needs more studying */
- msleep(100);
- }
-
- return r;
-}
-
-static void dsi_handle_framedone(void)
-{
- int r;
- const int channel = 0;
- bool use_te_trigger;
-
- use_te_trigger = dsi.te_enabled && !dsi.use_ext_te;
-
- if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
- DSSDBG("FRAMEDONE\n");
-
- if (use_te_trigger) {
+ if (dsi.te_enabled) {
/* enable LP_RX_TO again after the TE */
REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
}
@@ -2976,7 +2865,54 @@
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
DSSERR("Received error during frame transfer:\n");
- dsi_vc_flush_receive_data(0);
+ dsi_vc_flush_receive_data(channel);
+ }
+
+ dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
+}
+
+static void dsi_framedone_irq_callback(void *data, u32 mask)
+{
+ /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+ * turns itself off. However, DSI still has the pixels in its buffers,
+ * and is sending the data.
+ */
+
+ /* SIDLEMODE back to smart-idle */
+ dispc_enable_sidle();
+
+ schedule_work(&dsi.framedone_work);
+}
+
+static void dsi_handle_framedone(void)
+{
+ int r;
+ const int channel = dsi.update_channel;
+
+ DSSDBG("FRAMEDONE\n");
+
+ if (dsi.te_enabled) {
+ /* enable LP_RX_TO again after the TE */
+ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
+ }
+
+ /* Send BTA after the frame. We need this for the TE to work, as TE
+ * trigger is only sent for BTAs without preceding packet. Thus we need
+ * to BTA after the pixel packets so that next BTA will cause TE
+ * trigger.
+ *
+ * This is not needed when TE is not in use, but we do it anyway to
+ * make sure that the transfer has been completed. It would be more
+ * optimal, but more complex, to wait only just before starting next
+ * transfer. */
+ r = dsi_vc_send_bta_sync(channel);
+ if (r)
+ DSSERR("BTA after framedone failed\n");
+
+ /* RX_FIFO_NOT_EMPTY */
+ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
+ DSSERR("Received error during frame transfer:\n");
+ dsi_vc_flush_receive_data(channel);
}
#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
@@ -2984,118 +2920,79 @@
#endif
}
-static int dsi_update_thread(void *data)
+static void dsi_framedone_work_callback(struct work_struct *work)
{
- unsigned long timeout;
- struct omap_dss_device *device;
- u16 x, y, w, h;
+ DSSDBGF();
- while (1) {
- bool sched;
+ cancel_delayed_work_sync(&dsi.framedone_timeout_work);
- wait_event_interruptible(dsi.waitqueue,
- dsi.update_mode == OMAP_DSS_UPDATE_AUTO ||
- (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
- dsi.update_region.dirty == true) ||
- kthread_should_stop());
+ dsi_handle_framedone();
- if (kthread_should_stop())
- break;
+ dsi_perf_show("DISPC");
- dsi_bus_lock();
+ dsi.framedone_callback(0, dsi.framedone_data);
+}
- if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED ||
- kthread_should_stop()) {
- dsi_bus_unlock();
- break;
- }
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h)
+{
+ u16 dw, dh;
- dsi_perf_mark_setup();
+ dssdev->driver->get_resolution(dssdev, &dw, &dh);
- if (dsi.update_region.dirty) {
- spin_lock(&dsi.update_lock);
- dsi.active_update_region = dsi.update_region;
- dsi.update_region.dirty = false;
- spin_unlock(&dsi.update_lock);
- }
+ if (*x > dw || *y > dh)
+ return -EINVAL;
- device = dsi.active_update_region.device;
- x = dsi.active_update_region.x;
- y = dsi.active_update_region.y;
- w = dsi.active_update_region.w;
- h = dsi.active_update_region.h;
+ if (*x + *w > dw)
+ return -EINVAL;
- if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ if (*y + *h > dh)
+ return -EINVAL;
- if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
- dss_setup_partial_planes(device,
- &x, &y, &w, &h);
+ if (*w == 1)
+ return -EINVAL;
- dispc_set_lcd_size(w, h);
- }
+ if (*w == 0 || *h == 0)
+ return -EINVAL;
- if (dsi.active_update_region.dirty) {
- dsi.active_update_region.dirty = false;
- /* XXX TODO we don't need to send the coords, if they
- * are the same that are already programmed to the
- * panel. That should speed up manual update a bit */
- device->driver->setup_update(device, x, y, w, h);
- }
+ dsi_perf_mark_setup();
- dsi_perf_mark_start();
-
- if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dsi_vc_config_vp(0);
-
- if (dsi.te_enabled && dsi.use_ext_te)
- device->driver->wait_for_te(device);
-
- dsi.framedone_received = false;
-
- dsi_update_screen_dispc(device, x, y, w, h);
-
- /* wait for framedone */
- timeout = msecs_to_jiffies(1000);
- wait_event_timeout(dsi.waitqueue,
- dsi.framedone_received == true,
- timeout);
-
- if (!dsi.framedone_received) {
- DSSERR("framedone timeout\n");
- DSSERR("failed update %d,%d %dx%d\n",
- x, y, w, h);
-
- dispc_enable_sidle();
- dispc_enable_lcd_out(0);
-
- dsi_reset_tx_fifo(0);
- } else {
- dsi_handle_framedone();
- dsi_perf_show("DISPC");
- }
- } else {
- dsi_update_screen_l4(device, x, y, w, h);
- dsi_perf_show("L4");
- }
-
- sched = atomic_read(&dsi.bus_lock.count) < 0;
-
- complete_all(&dsi.update_completion);
-
- dsi_bus_unlock();
-
- /* XXX We need to give others chance to get the bus lock. Is
- * there a better way for this? */
- if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched)
- schedule_timeout_interruptible(1);
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ dss_setup_partial_planes(dssdev, x, y, w, h);
+ dispc_set_lcd_size(*w, *h);
}
- DSSDBG("update thread exiting\n");
-
return 0;
}
+EXPORT_SYMBOL(omap_dsi_prepare_update);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+ int channel,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(int, void *), void *data)
+{
+ dsi.update_channel = channel;
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ dsi.framedone_callback = callback;
+ dsi.framedone_data = data;
+
+ dsi.update_region.x = x;
+ dsi.update_region.y = y;
+ dsi.update_region.w = w;
+ dsi.update_region.h = h;
+ dsi.update_region.device = dssdev;
+
+ dsi_update_screen_dispc(dssdev, x, y, w, h);
+ } else {
+ dsi_update_screen_l4(dssdev, x, y, w, h);
+ dsi_perf_show("L4");
+ callback(0, data);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
@@ -3203,7 +3100,8 @@
if (r)
goto err1;
- dss_select_clk_source(true, true);
+ dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK);
+ dss_select_dsi_clk_source(DSS_SRC_DSI2_PLL_FCLK);
DSSDBG("PLL OK\n");
@@ -3229,25 +3127,18 @@
/* enable interface */
dsi_vc_enable(0, 1);
+ dsi_vc_enable(1, 1);
+ dsi_vc_enable(2, 1);
+ dsi_vc_enable(3, 1);
dsi_if_enable(1);
dsi_force_tx_stop_mode_io();
- if (dssdev->driver->enable) {
- r = dssdev->driver->enable(dssdev);
- if (r)
- goto err4;
- }
-
- /* enable high-speed after initial config */
- dsi_vc_enable_hs(0, 1);
-
return 0;
-err4:
- dsi_if_enable(0);
err3:
dsi_complexio_uninit();
err2:
- dss_select_clk_source(false, false);
+ dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
+ dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
err1:
dsi_pll_uninit();
err0:
@@ -3256,10 +3147,8 @@
static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
{
- if (dssdev->driver->disable)
- dssdev->driver->disable(dssdev);
-
- dss_select_clk_source(false, false);
+ dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
+ dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
dsi_complexio_uninit();
dsi_pll_uninit();
}
@@ -3280,14 +3169,15 @@
return 0;
}
-static int dsi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
{
int r = 0;
DSSDBG("dsi_display_enable\n");
+ WARN_ON(!dsi_bus_is_locked());
+
mutex_lock(&dsi.lock);
- dsi_bus_lock();
r = omap_dss_start_device(dssdev);
if (r) {
@@ -3295,73 +3185,47 @@
goto err0;
}
- if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
- DSSERR("dssdev already enabled\n");
- r = -EINVAL;
- goto err1;
- }
-
enable_clocks(1);
dsi_enable_pll_clock(1);
r = _dsi_reset();
if (r)
- goto err2;
+ goto err1;
dsi_core_init();
r = dsi_display_init_dispc(dssdev);
if (r)
- goto err2;
+ goto err1;
r = dsi_display_init_dsi(dssdev);
if (r)
- goto err3;
+ goto err2;
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- dsi.use_ext_te = dssdev->phy.dsi.ext_te;
- r = dsi_set_te(dssdev, dsi.te_enabled);
- if (r)
- goto err4;
-
- dsi_set_update_mode(dssdev, dsi.user_update_mode);
-
- dsi_bus_unlock();
mutex_unlock(&dsi.lock);
return 0;
-err4:
-
- dsi_display_uninit_dsi(dssdev);
-err3:
- dsi_display_uninit_dispc(dssdev);
err2:
+ dsi_display_uninit_dispc(dssdev);
+err1:
enable_clocks(0);
dsi_enable_pll_clock(0);
-err1:
omap_dss_stop_device(dssdev);
err0:
- dsi_bus_unlock();
mutex_unlock(&dsi.lock);
DSSDBG("dsi_display_enable FAILED\n");
return r;
}
+EXPORT_SYMBOL(omapdss_dsi_display_enable);
-static void dsi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev)
{
DSSDBG("dsi_display_disable\n");
+ WARN_ON(!dsi_bus_is_locked());
+
mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
- dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
- goto end;
-
- dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
dsi_display_uninit_dispc(dssdev);
@@ -3371,337 +3235,17 @@
dsi_enable_pll_clock(0);
omap_dss_stop_device(dssdev);
-end:
- dsi_bus_unlock();
+
mutex_unlock(&dsi.lock);
}
+EXPORT_SYMBOL(omapdss_dsi_display_disable);
-static int dsi_display_suspend(struct omap_dss_device *dssdev)
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
{
- DSSDBG("dsi_display_suspend\n");
-
- mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED ||
- dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
- goto end;
-
- dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
- dsi_display_uninit_dispc(dssdev);
-
- dsi_display_uninit_dsi(dssdev);
-
- enable_clocks(0);
- dsi_enable_pll_clock(0);
-end:
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
-
- return 0;
-}
-
-static int dsi_display_resume(struct omap_dss_device *dssdev)
-{
- int r;
-
- DSSDBG("dsi_display_resume\n");
-
- mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
- DSSERR("dssdev not suspended\n");
- r = -EINVAL;
- goto err0;
- }
-
- enable_clocks(1);
- dsi_enable_pll_clock(1);
-
- r = _dsi_reset();
- if (r)
- goto err1;
-
- dsi_core_init();
-
- r = dsi_display_init_dispc(dssdev);
- if (r)
- goto err1;
-
- r = dsi_display_init_dsi(dssdev);
- if (r)
- goto err2;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- r = dsi_set_te(dssdev, dsi.te_enabled);
- if (r)
- goto err2;
-
- dsi_set_update_mode(dssdev, dsi.user_update_mode);
-
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
-
- return 0;
-
-err2:
- dsi_display_uninit_dispc(dssdev);
-err1:
- enable_clocks(0);
- dsi_enable_pll_clock(0);
-err0:
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
- DSSDBG("dsi_display_resume FAILED\n");
- return r;
-}
-
-static int dsi_display_update(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- int r = 0;
- u16 dw, dh;
-
- DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
-
- mutex_lock(&dsi.lock);
-
- if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
- goto end;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- goto end;
-
- dssdev->get_resolution(dssdev, &dw, &dh);
-
- if (x > dw || y > dh)
- goto end;
-
- if (x + w > dw)
- w = dw - x;
-
- if (y + h > dh)
- h = dh - y;
-
- if (w == 0 || h == 0)
- goto end;
-
- if (w == 1) {
- r = -EINVAL;
- goto end;
- }
-
- dsi_set_update_region(dssdev, x, y, w, h);
-
- wake_up(&dsi.waitqueue);
-
-end:
- mutex_unlock(&dsi.lock);
-
- return r;
-}
-
-static int dsi_display_sync(struct omap_dss_device *dssdev)
-{
- bool wait;
-
- DSSDBG("dsi_display_sync()\n");
-
- mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL &&
- dsi.update_region.dirty) {
- INIT_COMPLETION(dsi.update_completion);
- wait = true;
- } else {
- wait = false;
- }
-
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
-
- if (wait)
- wait_for_completion_interruptible(&dsi.update_completion);
-
- DSSDBG("dsi_display_sync() done\n");
- return 0;
-}
-
-static int dsi_display_set_update_mode(struct omap_dss_device *dssdev,
- enum omap_dss_update_mode mode)
-{
- int r = 0;
-
- DSSDBGF("%d", mode);
-
- mutex_lock(&dsi.lock);
- dsi_bus_lock();
-
- dsi.user_update_mode = mode;
- r = dsi_set_update_mode(dssdev, mode);
-
- dsi_bus_unlock();
- mutex_unlock(&dsi.lock);
-
- return r;
-}
-
-static enum omap_dss_update_mode dsi_display_get_update_mode(
- struct omap_dss_device *dssdev)
-{
- return dsi.update_mode;
-}
-
-
-static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
- int r = 0;
-
- DSSDBGF("%d", enable);
-
- if (!dssdev->driver->enable_te)
- return -ENOENT;
-
- dsi_bus_lock();
-
dsi.te_enabled = enable;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- goto end;
-
- r = dsi_set_te(dssdev, enable);
-end:
- dsi_bus_unlock();
-
- return r;
-}
-
-static int dsi_display_get_te(struct omap_dss_device *dssdev)
-{
- return dsi.te_enabled;
-}
-
-static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate)
-{
-
- DSSDBGF("%d", rotate);
-
- if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
- return -EINVAL;
-
- dsi_bus_lock();
- dssdev->driver->set_rotate(dssdev, rotate);
- if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
- u16 w, h;
- /* the display dimensions may have changed, so set a new
- * update region */
- dssdev->get_resolution(dssdev, &w, &h);
- dsi_set_update_region(dssdev, 0, 0, w, h);
- }
- dsi_bus_unlock();
-
return 0;
}
-
-static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev)
-{
- if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
- return 0;
-
- return dssdev->driver->get_rotate(dssdev);
-}
-
-static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror)
-{
- DSSDBGF("%d", mirror);
-
- if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
- return -EINVAL;
-
- dsi_bus_lock();
- dssdev->driver->set_mirror(dssdev, mirror);
- dsi_bus_unlock();
-
- return 0;
-}
-
-static bool dsi_display_get_mirror(struct omap_dss_device *dssdev)
-{
- if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
- return 0;
-
- return dssdev->driver->get_mirror(dssdev);
-}
-
-static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num)
-{
- int r;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return -EIO;
-
- DSSDBGF("%d", test_num);
-
- dsi_bus_lock();
-
- /* run test first in low speed mode */
- dsi_vc_enable_hs(0, 0);
-
- if (dssdev->driver->run_test) {
- r = dssdev->driver->run_test(dssdev, test_num);
- if (r)
- goto end;
- }
-
- /* then in high speed */
- dsi_vc_enable_hs(0, 1);
-
- if (dssdev->driver->run_test) {
- r = dssdev->driver->run_test(dssdev, test_num);
- if (r)
- goto end;
- }
-
-end:
- dsi_vc_enable_hs(0, 1);
-
- dsi_bus_unlock();
-
- return r;
-}
-
-static int dsi_display_memory_read(struct omap_dss_device *dssdev,
- void *buf, size_t size,
- u16 x, u16 y, u16 w, u16 h)
-{
- int r;
-
- DSSDBGF("");
-
- if (!dssdev->driver->memory_read)
- return -EINVAL;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return -EIO;
-
- dsi_bus_lock();
-
- r = dssdev->driver->memory_read(dssdev, buf, size,
- x, y, w, h);
-
- /* Memory read usually changes the update area. This will
- * force the next update to re-set the update area */
- dsi.active_update_region.dirty = true;
-
- dsi_bus_unlock();
-
- return r;
-}
+EXPORT_SYMBOL(omapdss_dsi_enable_te);
void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
u32 fifo_size, enum omap_burst_size *burst_size,
@@ -3720,26 +3264,6 @@
{
DSSDBG("DSI init\n");
- dssdev->enable = dsi_display_enable;
- dssdev->disable = dsi_display_disable;
- dssdev->suspend = dsi_display_suspend;
- dssdev->resume = dsi_display_resume;
- dssdev->update = dsi_display_update;
- dssdev->sync = dsi_display_sync;
- dssdev->set_update_mode = dsi_display_set_update_mode;
- dssdev->get_update_mode = dsi_display_get_update_mode;
- dssdev->enable_te = dsi_display_enable_te;
- dssdev->get_te = dsi_display_get_te;
-
- dssdev->get_rotate = dsi_display_get_rotate;
- dssdev->set_rotate = dsi_display_set_rotate;
-
- dssdev->get_mirror = dsi_display_get_mirror;
- dssdev->set_mirror = dsi_display_set_mirror;
-
- dssdev->run_test = dsi_display_run_test;
- dssdev->memory_read = dsi_display_memory_read;
-
/* XXX these should be figured out dynamically */
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
@@ -3754,9 +3278,6 @@
{
u32 rev;
int r;
- struct sched_param param = {
- .sched_priority = MAX_USER_RT_PRIO-1
- };
spin_lock_init(&dsi.errors_lock);
dsi.errors = 0;
@@ -3767,31 +3288,19 @@
#endif
init_completion(&dsi.bta_completion);
- init_completion(&dsi.update_completion);
-
- dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi");
- if (IS_ERR(dsi.thread)) {
- DSSERR("cannot create kthread\n");
- r = PTR_ERR(dsi.thread);
- goto err0;
- }
- sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m);
-
- init_waitqueue_head(&dsi.waitqueue);
- spin_lock_init(&dsi.update_lock);
mutex_init(&dsi.lock);
- mutex_init(&dsi.bus_lock);
+ sema_init(&dsi.bus_lock, 1);
+
+ INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+ INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
+ dsi_framedone_timeout_work_callback);
#ifdef DSI_CATCH_MISSING_TE
init_timer(&dsi.te_timer);
dsi.te_timer.function = dsi_te_timeout;
dsi.te_timer.data = 0;
#endif
-
- dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
- dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED;
-
dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
if (!dsi.base) {
DSSERR("can't ioremap DSI\n");
@@ -3799,7 +3308,7 @@
goto err1;
}
- dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi");
+ dsi.vdds_dsi_reg = dss_get_vdds_dsi();
if (IS_ERR(dsi.vdds_dsi_reg)) {
iounmap(dsi.base);
DSSERR("can't get VDDS_DSI regulator\n");
@@ -3815,23 +3324,15 @@
enable_clocks(0);
- wake_up_process(dsi.thread);
-
return 0;
err2:
iounmap(dsi.base);
err1:
- kthread_stop(dsi.thread);
-err0:
return r;
}
void dsi_exit(void)
{
- kthread_stop(dsi.thread);
-
- regulator_put(dsi.vdds_dsi_reg);
-
iounmap(dsi.base);
DSSDBG("omap_dsi_exit\n");
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 0a26b7d..8254a42 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -68,6 +68,9 @@
struct dss_clock_info cache_dss_cinfo;
struct dispc_clock_info cache_dispc_cinfo;
+ enum dss_clk_source dsi_clk_source;
+ enum dss_clk_source dispc_clk_source;
+
u32 ctx[DSS_SZ_REGS / sizeof(u32)];
} dss;
@@ -247,23 +250,42 @@
#undef DUMPREG
}
-void dss_select_clk_source(bool dsi, bool dispc)
+void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
{
- u32 r;
- r = dss_read_reg(DSS_CONTROL);
- r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */
- r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */
- dss_write_reg(DSS_CONTROL, r);
+ int b;
+
+ BUG_ON(clk_src != DSS_SRC_DSI1_PLL_FCLK &&
+ clk_src != DSS_SRC_DSS1_ALWON_FCLK);
+
+ b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+
+ REG_FLD_MOD(DSS_CONTROL, b, 0, 0); /* DISPC_CLK_SWITCH */
+
+ dss.dispc_clk_source = clk_src;
}
-int dss_get_dsi_clk_source(void)
+void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
{
- return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1);
+ int b;
+
+ BUG_ON(clk_src != DSS_SRC_DSI2_PLL_FCLK &&
+ clk_src != DSS_SRC_DSS1_ALWON_FCLK);
+
+ b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+
+ REG_FLD_MOD(DSS_CONTROL, b, 1, 1); /* DSI_CLK_SWITCH */
+
+ dss.dsi_clk_source = clk_src;
}
-int dss_get_dispc_clk_source(void)
+enum dss_clk_source dss_get_dispc_clk_source(void)
{
- return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0);
+ return dss.dispc_clk_source;
+}
+
+enum dss_clk_source dss_get_dsi_clk_source(void)
+{
+ return dss.dsi_clk_source;
}
/* calculate clock rates using dividers in cinfo */
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 2bcb124..24326a5 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -119,6 +119,12 @@
DSS_CLK_96M = 1 << 4,
};
+enum dss_clk_source {
+ DSS_SRC_DSI1_PLL_FCLK,
+ DSS_SRC_DSI2_PLL_FCLK,
+ DSS_SRC_DSS1_ALWON_FCLK,
+};
+
struct dss_clock_info {
/* rates that we get with dividers below */
unsigned long fck;
@@ -169,6 +175,9 @@
int dss_need_ctx_restore(void);
void dss_dump_clocks(struct seq_file *s);
struct bus_type *dss_get_bus(void);
+struct regulator *dss_get_vdds_dsi(void);
+struct regulator *dss_get_vdds_sdi(void);
+struct regulator *dss_get_vdda_dac(void);
/* display */
int dss_suspend_all_devices(void);
@@ -216,9 +225,11 @@
int dss_sdi_enable(void);
void dss_sdi_disable(void);
-void dss_select_clk_source(bool dsi, bool dispc);
-int dss_get_dsi_clk_source(void);
-int dss_get_dispc_clk_source(void);
+void dss_select_dispc_clk_source(enum dss_clk_source clk_src);
+void dss_select_dsi_clk_source(enum dss_clk_source clk_src);
+enum dss_clk_source dss_get_dispc_clk_source(void);
+enum dss_clk_source dss_get_dsi_clk_source(void);
+
void dss_set_venc_output(enum omap_dss_venc_type type);
void dss_set_dac_pwrdn_bgz(bool enable);
@@ -261,7 +272,7 @@
u32 *fifo_low, u32 *fifo_high);
/* DPI */
-int dpi_init(void);
+int dpi_init(struct platform_device *pdev);
void dpi_exit(void);
int dpi_init_display(struct omap_dss_device *dssdev);
@@ -313,8 +324,8 @@
bool dispc_go_busy(enum omap_channel channel);
void dispc_go(enum omap_channel channel);
-void dispc_enable_lcd_out(bool enable);
-void dispc_enable_digit_out(bool enable);
+void dispc_enable_channel(enum omap_channel channel, bool enable);
+bool dispc_is_channel_enabled(enum omap_channel channel);
int dispc_enable_plane(enum omap_plane plane, bool enable);
void dispc_enable_replication(enum omap_plane plane, bool enable);
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 27d9c46..913142d 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -501,6 +501,19 @@
return 0;
}
+static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
+{
+ unsigned long timeout = msecs_to_jiffies(500);
+ u32 irq;
+
+ if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC)
+ irq = DISPC_IRQ_EVSYNC_ODD;
+ else
+ irq = DISPC_IRQ_VSYNC;
+
+ return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+}
+
static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
@@ -509,17 +522,18 @@
u32 irq;
int r;
int i;
+ struct omap_dss_device *dssdev = mgr->device;
- if (!mgr->device)
+ if (!dssdev)
return 0;
- if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
+ if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
channel = OMAP_DSS_CHANNEL_DIGIT;
} else {
- if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
+ if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode;
- mode = mgr->device->get_update_mode(mgr->device);
+ mode = dssdev->driver->get_update_mode(dssdev);
if (mode != OMAP_DSS_UPDATE_AUTO)
return 0;
@@ -592,7 +606,7 @@
} else {
if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode;
- mode = dssdev->get_update_mode(dssdev);
+ mode = dssdev->driver->get_update_mode(dssdev);
if (mode != OMAP_DSS_UPDATE_AUTO)
return 0;
@@ -1064,7 +1078,7 @@
mc->shadow_dirty = false;
}
- dispc_enable_lcd_out(1);
+ dssdev->manager->enable(dssdev->manager);
}
static void dss_apply_irq_handler(void *data, u32 mask)
@@ -1196,7 +1210,8 @@
oc->manual_update =
dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
- dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+ dssdev->driver->get_update_mode(dssdev) !=
+ OMAP_DSS_UPDATE_AUTO;
++num_planes_enabled;
}
@@ -1237,7 +1252,8 @@
mc->manual_update =
dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
- dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO;
+ dssdev->driver->get_update_mode(dssdev) !=
+ OMAP_DSS_UPDATE_AUTO;
}
/* XXX TODO: Try to get fifomerge working. The problem is that it
@@ -1351,6 +1367,18 @@
*info = mgr->info;
}
+static int dss_mgr_enable(struct omap_overlay_manager *mgr)
+{
+ dispc_enable_channel(mgr->id, 1);
+ return 0;
+}
+
+static int dss_mgr_disable(struct omap_overlay_manager *mgr)
+{
+ dispc_enable_channel(mgr->id, 0);
+ return 0;
+}
+
static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
{
++num_managers;
@@ -1394,6 +1422,10 @@
mgr->set_manager_info = &omap_dss_mgr_set_info;
mgr->get_manager_info = &omap_dss_mgr_get_info;
mgr->wait_for_go = &dss_mgr_wait_for_go;
+ mgr->wait_for_vsync = &dss_mgr_wait_for_vsync;
+
+ mgr->enable = &dss_mgr_enable;
+ mgr->disable = &dss_mgr_disable;
mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index b7f9a73..0c5bea2 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -350,7 +350,7 @@
return -EINVAL;
}
- dssdev->get_resolution(dssdev, &dw, &dh);
+ dssdev->driver->get_resolution(dssdev, &dw, &dh);
DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
ovl->id,
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index b936495..cc23f53 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -36,8 +36,6 @@
#include <plat/display.h>
#include "dss.h"
-/*#define MEASURE_PERF*/
-
#define RFBI_BASE 0x48050800
struct rfbi_reg { u16 idx; };
@@ -66,8 +64,6 @@
#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090)
#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094)
-#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
-
#define REG_FLD_MOD(idx, val, start, end) \
rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
@@ -102,7 +98,6 @@
static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
-static void process_cmd_fifo(void);
static struct {
void __iomem *base;
@@ -125,11 +120,6 @@
struct completion cmd_done;
atomic_t cmd_fifo_full;
atomic_t cmd_pending;
-#ifdef MEASURE_PERF
- unsigned perf_bytes;
- ktime_t perf_setup_time;
- ktime_t perf_start_time;
-#endif
} rfbi;
struct update_region {
@@ -139,16 +129,6 @@
u16 h;
};
-struct update_param {
- u8 rfbi_module;
- u8 cmd;
-
- union {
- struct update_region r;
- struct completion *sync;
- } par;
-};
-
static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
{
__raw_writel(val, rfbi.base + idx.idx);
@@ -321,55 +301,6 @@
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
-#ifdef MEASURE_PERF
-static void perf_mark_setup(void)
-{
- rfbi.perf_setup_time = ktime_get();
-}
-
-static void perf_mark_start(void)
-{
- rfbi.perf_start_time = ktime_get();
-}
-
-static void perf_show(const char *name)
-{
- ktime_t t, setup_time, trans_time;
- u32 total_bytes;
- u32 setup_us, trans_us, total_us;
-
- t = ktime_get();
-
- setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
- setup_us = (u32)ktime_to_us(setup_time);
- if (setup_us == 0)
- setup_us = 1;
-
- trans_time = ktime_sub(t, rfbi.perf_start_time);
- trans_us = (u32)ktime_to_us(trans_time);
- if (trans_us == 0)
- trans_us = 1;
-
- total_us = setup_us + trans_us;
-
- total_bytes = rfbi.perf_bytes;
-
- DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
- "%u kbytes/sec\n",
- name,
- setup_us,
- trans_us,
- total_us,
- 1000*1000 / total_us,
- total_bytes,
- total_bytes * 1000 / total_us);
-}
-#else
-#define perf_mark_setup()
-#define perf_mark_start()
-#define perf_show(x)
-#endif
-
void rfbi_transfer_area(u16 width, u16 height,
void (callback)(void *data), void *data)
{
@@ -382,7 +313,7 @@
dispc_set_lcd_size(width, height);
- dispc_enable_lcd_out(1);
+ dispc_enable_channel(OMAP_DSS_CHANNEL_LCD, true);
rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data;
@@ -396,8 +327,6 @@
if (!rfbi.te_enabled)
l = FLD_MOD(l, 1, 4, 4); /* ITE */
- perf_mark_start();
-
rfbi_write_reg(RFBI_CONTROL, l);
}
@@ -407,8 +336,6 @@
DSSDBG("FRAMEDONE\n");
- perf_show("DISPC");
-
REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
rfbi_enable_clocks(0);
@@ -416,11 +343,10 @@
callback = rfbi.framedone_callback;
rfbi.framedone_callback = NULL;
- /*callback(rfbi.framedone_callback_data);*/
+ if (callback != NULL)
+ callback(rfbi.framedone_callback_data);
atomic_set(&rfbi.cmd_pending, 0);
-
- process_cmd_fifo();
}
#if 1 /* VERBOSE */
@@ -937,52 +863,43 @@
}
EXPORT_SYMBOL(rfbi_configure);
-static int rfbi_find_display(struct omap_dss_device *dssdev)
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+ u16 *x, u16 *y, u16 *w, u16 *h)
{
- if (dssdev == rfbi.dssdev[0])
- return 0;
+ u16 dw, dh;
- if (dssdev == rfbi.dssdev[1])
- return 1;
+ dssdev->driver->get_resolution(dssdev, &dw, &dh);
- BUG();
- return -1;
-}
+ if (*x > dw || *y > dh)
+ return -EINVAL;
+ if (*x + *w > dw)
+ return -EINVAL;
-static void signal_fifo_waiters(void)
-{
- if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
- /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
- complete(&rfbi.cmd_done);
- atomic_dec(&rfbi.cmd_fifo_full);
- }
-}
+ if (*y + *h > dh)
+ return -EINVAL;
-/* returns 1 for async op, and 0 for sync op */
-static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
-{
- u16 x = upd->x;
- u16 y = upd->y;
- u16 w = upd->w;
- u16 h = upd->h;
+ if (*w == 1)
+ return -EINVAL;
- perf_mark_setup();
+ if (*w == 0 || *h == 0)
+ return -EINVAL;
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- /*dssdev->driver->enable_te(dssdev, 1); */
- dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+ dss_setup_partial_planes(dssdev, x, y, w, h);
+ dispc_set_lcd_size(*w, *h);
}
-#ifdef MEASURE_PERF
- rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
-#endif
+ return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_prepare_update);
- dssdev->driver->setup_update(dssdev, x, y, w, h);
-
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h,
+ void (*callback)(void *), void *data)
+{
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- rfbi_transfer_area(w, h, NULL, NULL);
- return 1;
+ rfbi_transfer_area(w, h, callback, data);
} else {
struct omap_overlay *ovl;
void __iomem *addr;
@@ -994,123 +911,12 @@
omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
- perf_show("L4");
-
- return 0;
- }
-}
-
-static void process_cmd_fifo(void)
-{
- int len;
- struct update_param p;
- struct omap_dss_device *dssdev;
- unsigned long flags;
-
- if (atomic_inc_return(&rfbi.cmd_pending) != 1)
- return;
-
- while (true) {
- spin_lock_irqsave(&rfbi.cmd_lock, flags);
-
- len = kfifo_out(&rfbi.cmd_fifo, (unsigned char *)&p,
- sizeof(struct update_param));
- if (len == 0) {
- DSSDBG("nothing more in fifo\n");
- atomic_set(&rfbi.cmd_pending, 0);
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
- break;
- }
-
- /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
-
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
- BUG_ON(len != sizeof(struct update_param));
- BUG_ON(p.rfbi_module > 1);
-
- dssdev = rfbi.dssdev[p.rfbi_module];
-
- if (p.cmd == RFBI_CMD_UPDATE) {
- if (do_update(dssdev, &p.par.r))
- break; /* async op */
- } else if (p.cmd == RFBI_CMD_SYNC) {
- DSSDBG("Signaling SYNC done!\n");
- complete(p.par.sync);
- } else
- BUG();
+ callback(data);
}
- signal_fifo_waiters();
+ return 0;
}
-
-static void rfbi_push_cmd(struct update_param *p)
-{
- int ret;
-
- while (1) {
- unsigned long flags;
- int available;
-
- spin_lock_irqsave(&rfbi.cmd_lock, flags);
- available = RFBI_CMD_FIFO_LEN_BYTES -
- kfifo_len(&rfbi.cmd_fifo);
-
-/* DSSDBG("%d bytes left in fifo\n", available); */
- if (available < sizeof(struct update_param)) {
- DSSDBG("Going to wait because FIFO FULL..\n");
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
- atomic_inc(&rfbi.cmd_fifo_full);
- wait_for_completion(&rfbi.cmd_done);
- /*DSSDBG("Woke up because fifo not full anymore\n");*/
- continue;
- }
-
- ret = kfifo_in(&rfbi.cmd_fifo, (unsigned char *)p,
- sizeof(struct update_param));
-/* DSSDBG("pushed %d bytes\n", ret);*/
-
- spin_unlock_irqrestore(&rfbi.cmd_lock, flags);
-
- BUG_ON(ret != sizeof(struct update_param));
-
- break;
- }
-}
-
-static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
-{
- struct update_param p;
-
- p.rfbi_module = rfbi_module;
- p.cmd = RFBI_CMD_UPDATE;
-
- p.par.r.x = x;
- p.par.r.y = y;
- p.par.r.w = w;
- p.par.r.h = h;
-
- DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
-
- rfbi_push_cmd(&p);
-
- process_cmd_fifo();
-}
-
-static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
-{
- struct update_param p;
-
- p.rfbi_module = rfbi_module;
- p.cmd = RFBI_CMD_SYNC;
- p.par.sync = sync_comp;
-
- rfbi_push_cmd(&p);
-
- DSSDBG("RFBI sync pushed to cmd fifo\n");
-
- process_cmd_fifo();
-}
+EXPORT_SYMBOL(omap_rfbi_update);
void rfbi_dump_regs(struct seq_file *s)
{
@@ -1155,12 +961,8 @@
{
u32 rev;
u32 l;
- int r;
spin_lock_init(&rfbi.cmd_lock);
- r = kfifo_alloc(&rfbi.cmd_fifo, RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL);
- if (r)
- return r;
init_completion(&rfbi.cmd_done);
atomic_set(&rfbi.cmd_fifo_full, 0);
@@ -1196,49 +998,10 @@
{
DSSDBG("rfbi_exit\n");
- kfifo_free(&rfbi.cmd_fifo);
-
iounmap(rfbi.base);
}
-/* struct omap_display support */
-static int rfbi_display_update(struct omap_dss_device *dssdev,
- u16 x, u16 y, u16 w, u16 h)
-{
- int rfbi_module;
-
- if (w == 0 || h == 0)
- return 0;
-
- rfbi_module = rfbi_find_display(dssdev);
-
- rfbi_push_update(rfbi_module, x, y, w, h);
-
- return 0;
-}
-
-static int rfbi_display_sync(struct omap_dss_device *dssdev)
-{
- struct completion sync_comp;
- int rfbi_module;
-
- rfbi_module = rfbi_find_display(dssdev);
-
- init_completion(&sync_comp);
- rfbi_push_sync(rfbi_module, &sync_comp);
- DSSDBG("Waiting for SYNC to happen...\n");
- wait_for_completion(&sync_comp);
- DSSDBG("Released from SYNC\n");
- return 0;
-}
-
-static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
-{
- dssdev->driver->enable_te(dssdev, enable);
- return 0;
-}
-
-static int rfbi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -1269,41 +1032,25 @@
&dssdev->ctrl.rfbi_timings);
- if (dssdev->driver->enable) {
- r = dssdev->driver->enable(dssdev);
- if (r)
- goto err2;
- }
-
return 0;
-err2:
- omap_dispc_unregister_isr(framedone_callback, NULL,
- DISPC_IRQ_FRAMEDONE);
err1:
omap_dss_stop_device(dssdev);
err0:
return r;
}
+EXPORT_SYMBOL(omapdss_rfbi_display_enable);
-static void rfbi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
{
- dssdev->driver->disable(dssdev);
omap_dispc_unregister_isr(framedone_callback, NULL,
DISPC_IRQ_FRAMEDONE);
omap_dss_stop_device(dssdev);
}
+EXPORT_SYMBOL(omapdss_rfbi_display_disable);
int rfbi_init_display(struct omap_dss_device *dssdev)
{
- dssdev->enable = rfbi_display_enable;
- dssdev->disable = rfbi_display_disable;
- dssdev->update = rfbi_display_update;
- dssdev->sync = rfbi_display_sync;
- dssdev->enable_te = rfbi_display_enable_te;
-
rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
-
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
-
return 0;
}
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index c24f307..12eb404 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -41,7 +41,7 @@
dispc_lcd_enable_signal_polarity(1);
}
-static int sdi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_video_timings *t = &dssdev->panel.timings;
struct dss_clock_info dss_cinfo;
@@ -57,12 +57,6 @@
goto err0;
}
- if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
- DSSERR("dssdev already enabled\n");
- r = -EINVAL;
- goto err1;
- }
-
/* In case of skip_init sdi_init has already enabled the clocks */
if (!sdi.skip_init)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -119,7 +113,7 @@
mdelay(2);
}
- dispc_enable_lcd_out(1);
+ dssdev->manager->enable(dssdev->manager);
if (dssdev->driver->enable) {
r = dssdev->driver->enable(dssdev);
@@ -127,13 +121,11 @@
goto err3;
}
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
sdi.skip_init = 0;
return 0;
err3:
- dispc_enable_lcd_out(0);
+ dssdev->manager->disable(dssdev->manager);
err2:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
err1:
@@ -141,120 +133,27 @@
err0:
return r;
}
+EXPORT_SYMBOL(omapdss_sdi_display_enable);
-static int sdi_display_resume(struct omap_dss_device *dssdev);
-
-static void sdi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
{
- if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
- return;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED)
- if (sdi_display_resume(dssdev))
- return;
-
if (dssdev->driver->disable)
dssdev->driver->disable(dssdev);
- dispc_enable_lcd_out(0);
+ dssdev->manager->disable(dssdev->manager);
dss_sdi_disable();
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
omap_dss_stop_device(dssdev);
}
-
-static int sdi_display_suspend(struct omap_dss_device *dssdev)
-{
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return -EINVAL;
-
- if (dssdev->driver->suspend)
- dssdev->driver->suspend(dssdev);
-
- dispc_enable_lcd_out(0);
-
- dss_sdi_disable();
-
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-
- return 0;
-}
-
-static int sdi_display_resume(struct omap_dss_device *dssdev)
-{
- int r;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
- return -EINVAL;
-
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
-
- r = dss_sdi_enable();
- if (r)
- goto err;
- mdelay(2);
-
- dispc_enable_lcd_out(1);
-
- if (dssdev->driver->resume)
- dssdev->driver->resume(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
-err:
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
- return r;
-}
-
-static int sdi_display_set_update_mode(struct omap_dss_device *dssdev,
- enum omap_dss_update_mode mode)
-{
- if (mode == OMAP_DSS_UPDATE_MANUAL)
- return -EINVAL;
-
- if (mode == OMAP_DSS_UPDATE_DISABLED) {
- dispc_enable_lcd_out(0);
- sdi.update_enabled = 0;
- } else {
- dispc_enable_lcd_out(1);
- sdi.update_enabled = 1;
- }
-
- return 0;
-}
-
-static enum omap_dss_update_mode sdi_display_get_update_mode(
- struct omap_dss_device *dssdev)
-{
- return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO :
- OMAP_DSS_UPDATE_DISABLED;
-}
-
-static void sdi_get_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- *timings = dssdev->panel.timings;
-}
+EXPORT_SYMBOL(omapdss_sdi_display_disable);
int sdi_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("SDI init\n");
- dssdev->enable = sdi_display_enable;
- dssdev->disable = sdi_display_disable;
- dssdev->suspend = sdi_display_suspend;
- dssdev->resume = sdi_display_resume;
- dssdev->set_update_mode = sdi_display_set_update_mode;
- dssdev->get_update_mode = sdi_display_get_update_mode;
- dssdev->get_timings = sdi_get_timings;
-
return 0;
}
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 749a5a0..f0ba573 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -400,114 +400,6 @@
BUG();
}
-
-
-
-
-/* driver */
-static int venc_panel_probe(struct omap_dss_device *dssdev)
-{
- dssdev->panel.timings = omap_dss_pal_timings;
-
- return 0;
-}
-
-static void venc_panel_remove(struct omap_dss_device *dssdev)
-{
-}
-
-static int venc_panel_enable(struct omap_dss_device *dssdev)
-{
- int r = 0;
-
- /* wait couple of vsyncs until enabling the LCD */
- msleep(50);
-
- if (dssdev->platform_enable)
- r = dssdev->platform_enable(dssdev);
-
- return r;
-}
-
-static void venc_panel_disable(struct omap_dss_device *dssdev)
-{
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
- /* wait at least 5 vsyncs after disabling the LCD */
-
- msleep(100);
-}
-
-static int venc_panel_suspend(struct omap_dss_device *dssdev)
-{
- venc_panel_disable(dssdev);
- return 0;
-}
-
-static int venc_panel_resume(struct omap_dss_device *dssdev)
-{
- return venc_panel_enable(dssdev);
-}
-
-static struct omap_dss_driver venc_driver = {
- .probe = venc_panel_probe,
- .remove = venc_panel_remove,
-
- .enable = venc_panel_enable,
- .disable = venc_panel_disable,
- .suspend = venc_panel_suspend,
- .resume = venc_panel_resume,
-
- .driver = {
- .name = "venc",
- .owner = THIS_MODULE,
- },
-};
-/* driver end */
-
-
-
-int venc_init(struct platform_device *pdev)
-{
- u8 rev_id;
-
- mutex_init(&venc.venc_lock);
-
- venc.wss_data = 0;
-
- venc.base = ioremap(VENC_BASE, SZ_1K);
- if (!venc.base) {
- DSSERR("can't ioremap VENC\n");
- return -ENOMEM;
- }
-
- venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac");
- if (IS_ERR(venc.vdda_dac_reg)) {
- iounmap(venc.base);
- DSSERR("can't get VDDA_DAC regulator\n");
- return PTR_ERR(venc.vdda_dac_reg);
- }
-
- venc_enable_clocks(1);
-
- rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
- printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
-
- venc_enable_clocks(0);
-
- return omap_dss_register_driver(&venc_driver);
-}
-
-void venc_exit(void)
-{
- omap_dss_unregister_driver(&venc_driver);
-
- regulator_put(venc.vdda_dac_reg);
-
- iounmap(venc.base);
-}
-
static void venc_power_on(struct omap_dss_device *dssdev)
{
u32 l;
@@ -540,7 +432,7 @@
if (dssdev->platform_enable)
dssdev->platform_enable(dssdev);
- dispc_enable_digit_out(1);
+ dssdev->manager->enable(dssdev->manager);
}
static void venc_power_off(struct omap_dss_device *dssdev)
@@ -548,7 +440,7 @@
venc_write_reg(VENC_OUTPUT_CONTROL, 0);
dss_set_dac_pwrdn_bgz(0);
- dispc_enable_digit_out(0);
+ dssdev->manager->disable(dssdev->manager);
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
@@ -558,7 +450,23 @@
venc_enable_clocks(0);
}
-static int venc_enable_display(struct omap_dss_device *dssdev)
+
+
+
+
+/* driver */
+static int venc_panel_probe(struct omap_dss_device *dssdev)
+{
+ dssdev->panel.timings = omap_dss_pal_timings;
+
+ return 0;
+}
+
+static void venc_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int venc_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
@@ -568,7 +476,13 @@
if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
r = -EINVAL;
- goto err;
+ goto err1;
+ }
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto err2;
}
venc_power_on(dssdev);
@@ -576,13 +490,21 @@
venc.wss_data = 0;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-err:
+
+ /* wait couple of vsyncs until enabling the LCD */
+ msleep(50);
+
mutex_unlock(&venc.venc_lock);
return r;
+err2:
+ venc_power_off(dssdev);
+err1:
+ mutex_unlock(&venc.venc_lock);
+ return r;
}
-static void venc_disable_display(struct omap_dss_device *dssdev)
+static void venc_panel_disable(struct omap_dss_device *dssdev)
{
DSSDBG("venc_disable_display\n");
@@ -599,53 +521,40 @@
venc_power_off(dssdev);
+ /* wait at least 5 vsyncs after disabling the LCD */
+ msleep(100);
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
end:
mutex_unlock(&venc.venc_lock);
}
-static int venc_display_suspend(struct omap_dss_device *dssdev)
+static int venc_panel_suspend(struct omap_dss_device *dssdev)
{
- int r = 0;
-
- DSSDBG("venc_display_suspend\n");
-
- mutex_lock(&venc.venc_lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
- r = -EINVAL;
- goto err;
- }
-
- venc_power_off(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
-err:
- mutex_unlock(&venc.venc_lock);
-
- return r;
+ venc_panel_disable(dssdev);
+ return 0;
}
-static int venc_display_resume(struct omap_dss_device *dssdev)
+static int venc_panel_resume(struct omap_dss_device *dssdev)
{
- int r = 0;
+ return venc_panel_enable(dssdev);
+}
- DSSDBG("venc_display_resume\n");
+static enum omap_dss_update_mode venc_get_update_mode(
+ struct omap_dss_device *dssdev)
+{
+ return OMAP_DSS_UPDATE_AUTO;
+}
- mutex_lock(&venc.venc_lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
- r = -EINVAL;
- goto err;
- }
-
- venc_power_on(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-err:
- mutex_unlock(&venc.venc_lock);
-
- return r;
+static int venc_set_update_mode(struct omap_dss_device *dssdev,
+ enum omap_dss_update_mode mode)
+{
+ if (mode != OMAP_DSS_UPDATE_AUTO)
+ return -EINVAL;
+ return 0;
}
static void venc_get_timings(struct omap_dss_device *dssdev,
@@ -666,8 +575,8 @@
dssdev->panel.timings = *timings;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
/* turn the venc off and on to get new timings to use */
- venc_disable_display(dssdev);
- venc_enable_display(dssdev);
+ venc_panel_disable(dssdev);
+ venc_panel_enable(dssdev);
}
}
@@ -716,30 +625,79 @@
return 0;
}
-static enum omap_dss_update_mode venc_display_get_update_mode(
- struct omap_dss_device *dssdev)
+static struct omap_dss_driver venc_driver = {
+ .probe = venc_panel_probe,
+ .remove = venc_panel_remove,
+
+ .enable = venc_panel_enable,
+ .disable = venc_panel_disable,
+ .suspend = venc_panel_suspend,
+ .resume = venc_panel_resume,
+
+ .get_resolution = omapdss_default_get_resolution,
+ .get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+ .set_update_mode = venc_set_update_mode,
+ .get_update_mode = venc_get_update_mode,
+
+ .get_timings = venc_get_timings,
+ .set_timings = venc_set_timings,
+ .check_timings = venc_check_timings,
+
+ .get_wss = venc_get_wss,
+ .set_wss = venc_set_wss,
+
+ .driver = {
+ .name = "venc",
+ .owner = THIS_MODULE,
+ },
+};
+/* driver end */
+
+
+
+int venc_init(struct platform_device *pdev)
{
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- return OMAP_DSS_UPDATE_AUTO;
- else
- return OMAP_DSS_UPDATE_DISABLED;
+ u8 rev_id;
+
+ mutex_init(&venc.venc_lock);
+
+ venc.wss_data = 0;
+
+ venc.base = ioremap(VENC_BASE, SZ_1K);
+ if (!venc.base) {
+ DSSERR("can't ioremap VENC\n");
+ return -ENOMEM;
+ }
+
+ venc.vdda_dac_reg = dss_get_vdda_dac();
+ if (IS_ERR(venc.vdda_dac_reg)) {
+ iounmap(venc.base);
+ DSSERR("can't get VDDA_DAC regulator\n");
+ return PTR_ERR(venc.vdda_dac_reg);
+ }
+
+ venc_enable_clocks(1);
+
+ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
+ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
+
+ venc_enable_clocks(0);
+
+ return omap_dss_register_driver(&venc_driver);
+}
+
+void venc_exit(void)
+{
+ omap_dss_unregister_driver(&venc_driver);
+
+ iounmap(venc.base);
}
int venc_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("init_display\n");
- dssdev->enable = venc_enable_display;
- dssdev->disable = venc_disable_display;
- dssdev->suspend = venc_display_suspend;
- dssdev->resume = venc_display_resume;
- dssdev->get_timings = venc_get_timings;
- dssdev->set_timings = venc_set_timings;
- dssdev->check_timings = venc_check_timings;
- dssdev->get_wss = venc_get_wss;
- dssdev->set_wss = venc_set_wss;
- dssdev->get_update_mode = venc_display_get_update_mode;
-
return 0;
}
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
index bb694cc..43496d6 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -16,16 +16,7 @@
depends on FB_OMAP2
help
Support for debug output. You have to enable the actual printing
- with debug module parameter.
-
-config FB_OMAP2_FORCE_AUTO_UPDATE
- bool "Force main display to automatic update mode"
- depends on FB_OMAP2
- help
- Forces main display to automatic update mode (if possible),
- and also enables tearsync (if possible). By default
- displays that support manual update are started in manual
- update mode.
+ with 'debug' module parameter.
config FB_OMAP2_NUM_FBS
int "Number of framebuffers"
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 4c4bafd..1ffa760 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -167,12 +167,12 @@
if (w == 0 || h == 0)
return 0;
- display->get_resolution(display, &dw, &dh);
+ display->driver->get_resolution(display, &dw, &dh);
if (x + w > dw || y + h > dh)
return -EINVAL;
- return display->update(display, x, y, w, h);
+ return display->driver->update(display, x, y, w, h);
}
/* This function is exported for SGX driver use */
@@ -202,7 +202,7 @@
enum omap_dss_update_mode um;
int r;
- if (!display || !display->set_update_mode)
+ if (!display || !display->driver->set_update_mode)
return -EINVAL;
switch (mode) {
@@ -222,7 +222,7 @@
return -EINVAL;
}
- r = display->set_update_mode(display, um);
+ r = display->driver->set_update_mode(display, um);
return r;
}
@@ -233,10 +233,15 @@
struct omap_dss_device *display = fb2display(fbi);
enum omap_dss_update_mode m;
- if (!display || !display->get_update_mode)
+ if (!display)
return -EINVAL;
- m = display->get_update_mode(display);
+ if (!display->driver->get_update_mode) {
+ *mode = OMAPFB_AUTO_UPDATE;
+ return 0;
+ }
+
+ m = display->driver->get_update_mode(display);
switch (m) {
case OMAP_DSS_UPDATE_DISABLED:
@@ -374,7 +379,7 @@
void *buf;
int r;
- if (!display || !display->memory_read)
+ if (!display || !display->driver->memory_read)
return -ENOENT;
if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
@@ -389,7 +394,7 @@
return -ENOMEM;
}
- r = display->memory_read(display, buf, mr->buffer_size,
+ r = display->driver->memory_read(display, buf, mr->buffer_size,
mr->x, mr->y, mr->w, mr->h);
if (r > 0) {
@@ -483,6 +488,7 @@
struct omapfb_memory_read memory_read;
struct omapfb_vram_info vram_info;
struct omapfb_tearsync_info tearsync_info;
+ struct omapfb_display_info display_info;
} p;
int r = 0;
@@ -490,18 +496,18 @@
switch (cmd) {
case OMAPFB_SYNC_GFX:
DBG("ioctl SYNC_GFX\n");
- if (!display || !display->sync) {
+ if (!display || !display->driver->sync) {
/* DSS1 never returns an error here, so we neither */
/*r = -EINVAL;*/
break;
}
- r = display->sync(display);
+ r = display->driver->sync(display);
break;
case OMAPFB_UPDATE_WINDOW_OLD:
DBG("ioctl UPDATE_WINDOW_OLD\n");
- if (!display || !display->update) {
+ if (!display || !display->driver->update) {
r = -EINVAL;
break;
}
@@ -519,7 +525,7 @@
case OMAPFB_UPDATE_WINDOW:
DBG("ioctl UPDATE_WINDOW\n");
- if (!display || !display->update) {
+ if (!display || !display->driver->update) {
r = -EINVAL;
break;
}
@@ -648,7 +654,7 @@
break;
}
- r = display->wait_vsync(display);
+ r = display->manager->wait_for_vsync(display->manager);
break;
case OMAPFB_WAITFORGO:
@@ -669,12 +675,12 @@
r = -EFAULT;
break;
}
- if (!display || !display->run_test) {
+ if (!display || !display->driver->run_test) {
r = -EINVAL;
break;
}
- r = display->run_test(display, p.test_num);
+ r = display->driver->run_test(display, p.test_num);
break;
@@ -684,12 +690,12 @@
r = -EFAULT;
break;
}
- if (!display || !display->run_test) {
+ if (!display || !display->driver->run_test) {
r = -EINVAL;
break;
}
- r = display->run_test(display, p.test_num);
+ r = display->driver->run_test(display, p.test_num);
break;
@@ -731,16 +737,40 @@
break;
}
- if (!display->enable_te) {
+ if (!display->driver->enable_te) {
r = -ENODEV;
break;
}
- r = display->enable_te(display, !!p.tearsync_info.enabled);
+ r = display->driver->enable_te(display,
+ !!p.tearsync_info.enabled);
break;
}
+ case OMAPFB_GET_DISPLAY_INFO: {
+ u16 xres, yres;
+
+ DBG("ioctl GET_DISPLAY_INFO\n");
+
+ if (display == NULL) {
+ r = -ENODEV;
+ break;
+ }
+
+ display->driver->get_resolution(display, &xres, &yres);
+
+ p.display_info.xres = xres;
+ p.display_info.yres = yres;
+ p.display_info.width = 0;
+ p.display_info.height = 0;
+
+ if (copy_to_user((void __user *)arg, &p.display_info,
+ sizeof(p.display_info)))
+ r = -EFAULT;
+ break;
+ }
+
default:
dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd);
r = -EINVAL;
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index d17caef..4a76917 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -54,6 +54,8 @@
#endif
static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi);
+static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev,
+ struct omap_dss_device *dssdev);
#ifdef DEBUG
static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
@@ -152,9 +154,9 @@
}
#endif
-static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
+static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
{
- struct vrfb *vrfb = &ofbi->region.vrfb;
+ const struct vrfb *vrfb = &ofbi->region.vrfb;
unsigned offset;
switch (rot) {
@@ -179,7 +181,7 @@
return offset;
}
-static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot)
+static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
return ofbi->region.vrfb.paddr[rot]
@@ -189,7 +191,7 @@
}
}
-static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
+static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
return ofbi->region.vrfb.paddr[0];
@@ -197,7 +199,7 @@
return ofbi->region.paddr;
}
-static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
+static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
return ofbi->region.vrfb.vaddr[0];
@@ -703,9 +705,9 @@
var->width = -1;
var->grayscale = 0;
- if (display && display->get_timings) {
+ if (display && display->driver->get_timings) {
struct omap_video_timings timings;
- display->get_timings(display, &timings);
+ display->driver->get_timings(display, &timings);
/* pixclock in ps, the rest in pixclock */
var->pixclock = timings.pixel_clock != 0 ?
@@ -778,8 +780,8 @@
return 0;
}
-static unsigned calc_rotation_offset_dma(struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix, int rotation)
+static unsigned calc_rotation_offset_dma(const struct fb_var_screeninfo *var,
+ const struct fb_fix_screeninfo *fix, int rotation)
{
unsigned offset;
@@ -789,8 +791,8 @@
return offset;
}
-static unsigned calc_rotation_offset_vrfb(struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix, int rotation)
+static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var,
+ const struct fb_fix_screeninfo *fix, int rotation)
{
unsigned offset;
@@ -1221,11 +1223,11 @@
if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
goto exit;
- if (display->resume)
- r = display->resume(display);
+ if (display->driver->resume)
+ r = display->driver->resume(display);
- if (r == 0 && display->get_update_mode &&
- display->get_update_mode(display) ==
+ if (r == 0 && display->driver->get_update_mode &&
+ display->driver->get_update_mode(display) ==
OMAP_DSS_UPDATE_MANUAL)
do_update = 1;
@@ -1240,8 +1242,8 @@
if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
goto exit;
- if (display->suspend)
- r = display->suspend(display);
+ if (display->driver->suspend)
+ r = display->driver->suspend(display);
break;
@@ -1252,11 +1254,11 @@
exit:
omapfb_unlock(fbdev);
- if (r == 0 && do_update && display->update) {
+ if (r == 0 && do_update && display->driver->update) {
u16 w, h;
- display->get_resolution(display, &w, &h);
+ display->driver->get_resolution(display, &w, &h);
- r = display->update(display, 0, 0, w, h);
+ r = display->driver->update(display, 0, 0, w, h);
}
return r;
@@ -1404,6 +1406,7 @@
unsigned long paddr)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
+ struct omapfb2_device *fbdev = ofbi->fbdev;
struct omap_dss_device *display;
int bytespp;
@@ -1412,7 +1415,7 @@
if (!display)
return 0;
- switch (display->get_recommended_bpp(display)) {
+ switch (omapfb_get_recommended_bpp(fbdev, display)) {
case 16:
bytespp = 2;
break;
@@ -1427,7 +1430,7 @@
if (!size) {
u16 w, h;
- display->get_resolution(display, &w, &h);
+ display->driver->get_resolution(display, &w, &h);
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
size = max(omap_vrfb_min_phys_size(w, h, bytespp),
@@ -1636,8 +1639,8 @@
if (old_size == size && old_type == type)
return 0;
- if (display && display->sync)
- display->sync(display);
+ if (display && display->driver->sync)
+ display->driver->sync(display);
omapfb_free_fbmem(fbi);
@@ -1745,7 +1748,7 @@
u16 w, h;
int rotation = (var->rotate + ofbi->rotation[0]) % 4;
- display->get_resolution(display, &w, &h);
+ display->driver->get_resolution(display, &w, &h);
if (rotation == FB_ROTATE_CW ||
rotation == FB_ROTATE_CCW) {
@@ -1760,7 +1763,7 @@
var->yres_virtual = var->yres;
if (!var->bits_per_pixel) {
- switch (display->get_recommended_bpp(display)) {
+ switch (omapfb_get_recommended_bpp(fbdev, display)) {
case 16:
var->bits_per_pixel = 16;
break;
@@ -1828,7 +1831,7 @@
for (i = 0; i < fbdev->num_displays; i++) {
if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
- fbdev->displays[i]->disable(fbdev->displays[i]);
+ fbdev->displays[i]->driver->disable(fbdev->displays[i]);
omap_dss_put_device(fbdev->displays[i]);
}
@@ -2011,7 +2014,8 @@
}
}
-static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str)
+static int omapfb_set_def_mode(struct omapfb2_device *fbdev,
+ struct omap_dss_device *display, char *mode_str)
{
int r;
u8 bpp;
@@ -2021,20 +2025,37 @@
if (r)
return r;
- display->panel.recommended_bpp = bpp;
+ fbdev->bpp_overrides[fbdev->num_bpp_overrides].dssdev = display;
+ fbdev->bpp_overrides[fbdev->num_bpp_overrides].bpp = bpp;
+ ++fbdev->num_bpp_overrides;
- if (!display->check_timings || !display->set_timings)
+ if (!display->driver->check_timings || !display->driver->set_timings)
return -EINVAL;
- r = display->check_timings(display, &timings);
+ r = display->driver->check_timings(display, &timings);
if (r)
return r;
- display->set_timings(display, &timings);
+ display->driver->set_timings(display, &timings);
return 0;
}
+static int omapfb_get_recommended_bpp(struct omapfb2_device *fbdev,
+ struct omap_dss_device *dssdev)
+{
+ int i;
+
+ BUG_ON(dssdev->driver->get_recommended_bpp == NULL);
+
+ for (i = 0; i < fbdev->num_bpp_overrides; ++i) {
+ if (dssdev == fbdev->bpp_overrides[i].dssdev)
+ return fbdev->bpp_overrides[i].bpp;
+ }
+
+ return dssdev->driver->get_recommended_bpp(dssdev);
+}
+
static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
{
char *str, *options, *this_opt;
@@ -2073,7 +2094,7 @@
break;
}
- r = omapfb_set_def_mode(display, mode_str);
+ r = omapfb_set_def_mode(fbdev, display, mode_str);
if (r)
break;
}
@@ -2111,18 +2132,23 @@
fbdev->dev = &pdev->dev;
platform_set_drvdata(pdev, fbdev);
+ r = 0;
fbdev->num_displays = 0;
dssdev = NULL;
for_each_dss_dev(dssdev) {
omap_dss_get_device(dssdev);
+
if (!dssdev->driver) {
dev_err(&pdev->dev, "no driver for display\n");
- r = -EINVAL;
- goto cleanup;
+ r = -ENODEV;
}
+
fbdev->displays[fbdev->num_displays++] = dssdev;
}
+ if (r)
+ goto cleanup;
+
if (fbdev->num_displays == 0) {
dev_err(&pdev->dev, "no displays\n");
r = -EINVAL;
@@ -2167,35 +2193,28 @@
}
if (def_display) {
-#ifndef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
- u16 w, h;
-#endif
- r = def_display->enable(def_display);
- if (r)
+ struct omap_dss_driver *dssdrv = def_display->driver;
+
+ r = def_display->driver->enable(def_display);
+ if (r) {
dev_warn(fbdev->dev, "Failed to enable display '%s'\n",
def_display->name);
+ goto cleanup;
+ }
- /* set the update mode */
if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
-#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
- if (def_display->enable_te)
- def_display->enable_te(def_display, 1);
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
- OMAP_DSS_UPDATE_AUTO);
-#else /* MANUAL_UPDATE */
- if (def_display->enable_te)
- def_display->enable_te(def_display, 0);
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
+ u16 w, h;
+ if (dssdrv->enable_te)
+ dssdrv->enable_te(def_display, 1);
+ if (dssdrv->set_update_mode)
+ dssdrv->set_update_mode(def_display,
OMAP_DSS_UPDATE_MANUAL);
- def_display->get_resolution(def_display, &w, &h);
- def_display->update(def_display, 0, 0, w, h);
-#endif
+ dssdrv->get_resolution(def_display, &w, &h);
+ def_display->driver->update(def_display, 0, 0, w, h);
} else {
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
+ if (dssdrv->set_update_mode)
+ dssdrv->set_update_mode(def_display,
OMAP_DSS_UPDATE_AUTO);
}
}
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index f7c9c73..cd54fdb 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -83,6 +83,12 @@
struct omap_overlay *overlays[10];
unsigned num_managers;
struct omap_overlay_manager *managers[10];
+
+ unsigned num_bpp_overrides;
+ struct {
+ struct omap_dss_device *dssdev;
+ u8 bpp;
+ } bpp_overrides[10];
};
struct omapfb_colormode {
@@ -105,6 +111,9 @@
int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
+int omapfb_update_window(struct fb_info *fbi,
+ u32 x, u32 y, u32 w, u32 h);
+
int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
struct fb_var_screeninfo *var);
diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
index 18b9507..4cd5049 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/sunxvr500.c
@@ -400,6 +400,7 @@
static struct pci_device_id e3d_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), },
+ { PCI_DEVICE(0x1091, 0x7a0), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), },
{ .vendor = PCI_VENDOR_ID_3DLABS,
.device = PCI_ANY_ID,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 1d5191f..1b65732 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -473,7 +473,8 @@
list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
info = vq->priv;
- if (vp_dev->per_vq_vectors)
+ if (vp_dev->per_vq_vectors &&
+ info->msix_vector != VIRTIO_MSI_NO_VECTOR)
free_irq(vp_dev->msix_entries[info->msix_vector].vector,
vq);
vp_del_vq(vq);
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 3195fb8..80b3b12 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -60,7 +60,7 @@
config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
- depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+ depends on ARCH_OMAP2430 || ARCH_OMAP3
help
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 050ee14..3da3f48 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -194,7 +194,7 @@
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3
help
Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 430a584..c7a9479 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -96,9 +96,6 @@
{
spin_lock(&io_lock);
- if (wdt_clk)
- clk_set_rate(wdt_clk, 1);
-
/* stop counter, initiate counter reset */
__raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
/*wait for reset to complete. 100% guarantee event */
@@ -125,19 +122,25 @@
spin_lock(&io_lock);
__raw_writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */
- if (wdt_clk)
- clk_set_rate(wdt_clk, 0);
spin_unlock(&io_lock);
}
static int pnx4008_wdt_open(struct inode *inode, struct file *file)
{
+ int ret;
+
if (test_and_set_bit(WDT_IN_USE, &wdt_status))
return -EBUSY;
clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+ ret = clk_enable(wdt_clk);
+ if (ret) {
+ clear_bit(WDT_IN_USE, &wdt_status);
+ return ret;
+ }
+
wdt_enable();
return nonseekable_open(inode, file);
@@ -225,6 +228,7 @@
printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
wdt_disable();
+ clk_disable(wdt_clk);
clear_bit(WDT_IN_USE, &wdt_status);
clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
@@ -273,25 +277,33 @@
}
wdt_base = (void __iomem *)IO_ADDRESS(res->start);
- wdt_clk = clk_get(&pdev->dev, "wdt_ck");
+ wdt_clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(wdt_clk)) {
ret = PTR_ERR(wdt_clk);
release_resource(wdt_mem);
kfree(wdt_mem);
goto out;
- } else
- clk_set_rate(wdt_clk, 1);
+ }
+
+ ret = clk_enable(wdt_clk);
+ if (ret) {
+ release_resource(wdt_mem);
+ kfree(wdt_mem);
+ goto out;
+ }
ret = misc_register(&pnx4008_wdt_miscdev);
if (ret < 0) {
printk(KERN_ERR MODULE_NAME "cannot register misc device\n");
release_resource(wdt_mem);
kfree(wdt_mem);
- clk_set_rate(wdt_clk, 0);
+ clk_disable(wdt_clk);
+ clk_put(wdt_clk);
} else {
boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
WDIOF_CARDRESET : 0;
wdt_disable(); /*disable for now */
+ clk_disable(wdt_clk);
set_bit(WDT_DEVICE_INITED, &wdt_status);
}
@@ -302,11 +314,10 @@
static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
{
misc_deregister(&pnx4008_wdt_miscdev);
- if (wdt_clk) {
- clk_set_rate(wdt_clk, 0);
- clk_put(wdt_clk);
- wdt_clk = NULL;
- }
+
+ clk_disable(wdt_clk);
+ clk_put(wdt_clk);
+
if (wdt_mem) {
release_resource(wdt_mem);
kfree(wdt_mem);
diff --git a/firmware/bnx2x-e1-5.2.7.0.fw.ihex b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
deleted file mode 100644
index a99c41c..0000000
--- a/firmware/bnx2x-e1-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,10178 +0,0 @@
-:10000000000028B0000000600000068800002918E9
-:100010000000161400002FA800000098000045C042
-:10002000000073C400004660000000CC0000BA2845
-:10003000000099A00000BAF800000094000154A04C
-:10004000000057BC00015538000000B80001ACF8B2
-:100050000000CE2C0001ADB80000000400027BE8D7
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000960000081807600014022342
-:10054000071C000034C50000071C800034DB0D329E
-:10055000071D00000A1D1A69081D14405D78022558
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C800000181041A29CC0001022740
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1E3800000002061A1E300000000201
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00005022871
-:10073000041A4CB00008022D061A22C8000000203E
-:10074000061A400000000124021A4920000000009F
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050235DB
-:10077000061A151C00000009061A15800000001456
-:10078000061A09C000000048061A0800000000020E
-:10079000061A08200000000E041A1FB00002023AD8
-:1007A000061A2C2800000002061A23480000002028
-:1007B000061A449000000124021A49240000000097
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A154000000002041A15480005023CE4
-:1007E000061A155C00000009061A15D00000001456
-:1007F000061A0AE000000048061A08080000000275
-:10080000061A08580000000E041A1FB80002024120
-:10081000061A2C30000000020200A2800000000135
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF060C203800000002C7
-:10097000020C204000000034020C2044000000352E
-:10098000020C204800000020020C204C0000002136
-:10099000020C205000000022020C20540000002312
-:1009A000020C205800000024020C205C00000025EE
-:1009B000020C206000000026020C206400000027CA
-:1009C000020C206800000028020C206C00000029A6
-:1009D000020C20700000002A020C20740000002B82
-:1009E000060C207800000056020C21D00000000107
-:1009F000020C21D400000001020C21D800000001EB
-:100A0000020C21DC00000001020C21E000000001CA
-:100A1000020C21E400000001020C21E800000001AA
-:100A2000020C21EC00000001020C21F0000000018A
-:100A3000020C21F400000001060C21F80000001057
-:100A4000020C223807FFFFFF020C223C0000003F8F
-:100A5000020C224007FFFFFF020C22440000000F9F
-:100A6000010C224800000000010C224C0000000094
-:100A7000010C225000000000010C22540000000074
-:100A8000010C225800000000010C225C0000000054
-:100A9000010C226000000000010C22640000000034
-:100AA000010C226800000000010C226C0000000014
-:100AB000010C227000000000010C227400000000F4
-:100AC000010C227800000000010C227C00000000D4
-:100AD000020C24BC000000010C0C2000000003E804
-:100AE0000A0C2000000000010B0C20000000000A8E
-:100AF000020C400800000365020C400C0000035487
-:100B0000020C401000000358020C40140000037552
-:100B1000020C401C0000FFFF020C40200000FFFF01
-:100B2000020C40240000FFFF020C40280000FFFFE1
-:100B3000020C403800000046020C403C000000055A
-:100B4000060C40400000005E020C41B800000001AD
-:100B5000060C41BC0000001F020C423807FFFFFFDB
-:100B6000020C423C0000003F020C424007FFFFFF26
-:100B7000020C42440000000F010C4248000000003B
-:100B8000010C424C00000000010C4250000000002B
-:100B9000010C425400000000010C4258000000000B
-:100BA000010C425C00000000010C426000000000EB
-:100BB000010C426400000000010C426800000000CB
-:100BC000010C426C00000000010C427000000000AB
-:100BD000010C427400000000010C4278000000008B
-:100BE000010C427C00000000010C4280000000006B
-:100BF000020C44C0000000010C0C4000000003E89F
-:100C00000A0C4000000000010B0C40000000000A2C
-:100C1000020D004400000032020D008C021500207D
-:100C2000020D009002150020020D00940810000033
-:100C3000020D009800000033020D009C000000022D
-:100C4000020D00A000000000020D00A4000000053D
-:100C5000020D00A800000005060D00AC0000000217
-:100C6000020D00B400000002020D00B800000003F5
-:100C7000020D00BC00000002020D00C000000001D7
-:100C8000020D00C800000002020D00CC00000002AE
-:100C9000020D010800000001020D015C00000001CE
-:100CA000020D016400000001020D01680000000255
-:100CB000020D020400000001020D020C00000020E1
-:100CC000020D021000000040020D0214000000405E
-:100CD000020D022000000003020D02240000001893
-:100CE000060D028000000012040D030000240243E0
-:100CF000020D004C00000001020D00500000000237
-:100D0000020D005400000008020D00580000000809
-:100D1000060D005C00000004020D00C40000000489
-:100D2000020D011400000009020D01180000002945
-:100D3000020D011C0000000A020D01200000002A23
-:100D4000020D012400000007020D01280000002709
-:100D5000020D012C00000007020D013000000027E9
-:100D6000020D01340000000C020D01380000002CBF
-:100D7000020D013C0000000C020D01400000002C9F
-:100D8000020D01440000000C020D01480000002C7F
-:100D9000020D000400000001020D00080000000127
-:100DA000020D000C00000001020D00100000000107
-:100DB000020D001400000001020D001800000001E7
-:100DC000020D001C00000001020D002000000001C7
-:100DD000020D002400000001020D002800000001A7
-:100DE000020D002C00000001020D00300000000187
-:100DF000020D003400000001020D00380000000167
-:100E0000020D003C00000001020E004C0000003208
-:100E1000020E009402150020020E00980215002018
-:100E2000020E009C00000030020E00A0081000001E
-:100E3000020E00A400000033020E00A800000030E3
-:100E4000020E00AC00000031020E00B000000002F3
-:100E5000020E00B400000004020E00B80000000002
-:100E6000020E00BC00000002020E00C000000002E2
-:100E7000020E00C400000000020E00C800000002C4
-:100E8000020E00CC00000007020E00D0000000029D
-:100E9000020E00D400000002020E00D80000000183
-:100EA000020E00E400000001020E014400000001F7
-:100EB000020E014C00000001020E01500000000271
-:100EC000020E020400000001020E020C00000040AD
-:100ED000020E021000000040020E021C000000047E
-:100EE000020E022000000020020E02240000000E6C
-:100EF000020E02280000001B060E03000000001274
-:100F0000040E0280001B0267020E00540000000C59
-:100F1000020E005800000009020E005C0000000FE5
-:100F2000020E006000000010060E006400000004C5
-:100F3000020E00DC00000003020E01100000000F92
-:100F4000020E01140000002F020E01180000000E16
-:100F5000020E011C0000002E020E00040000000121
-:100F6000020E000800000001020E000C000000014B
-:100F7000020E001000000001020E0014000000012B
-:100F8000020E001800000001020E001C000000010B
-:100F9000020E002000000001020E002400000001EB
-:100FA000020E002800000001020E002C00000001CB
-:100FB000020E003000000001020E003400000001AB
-:100FC000020E003800000001020E003C000000018B
-:100FD000020E004000000001020E0044000000016B
-:100FE0000730040000CA00000830076800130282BE
-:100FF00007340000336100000734800037270CD924
-:10100000073500002F111AA30835708051F00284B3
-:10101000013000000000000001300004000000006A
-:1010200001300008000000000130000C000000004A
-:10103000013000100000000001300014000000002A
-:1010400002300020000000010230002400000002F5
-:1010500002300028000000030230002C00000000D5
-:1010600002300030000000040230003400000001B3
-:1010700002300038000000000230003C0000000197
-:101080000230004000000004023000440000000074
-:1010900002300048000000010230004C0000000354
-:1010A0000230005000000000023000540000000137
-:1010B00002300058000000040230005C0000000014
-:1010C00002300060000000010230006400000003F4
-:1010D00002300068000000000230006C00000001D7
-:1010E00002300070000000040230007400000000B4
-:1010F00002300078000000040230007C0000000391
-:101100000630008000000002023000A400003FFF13
-:10111000023000A8000003FF02300224000000009B
-:1011200002300234000000000230024C00000000D7
-:10113000023002E40000FFFF06302000000008003B
-:1011400002338BC000000001023380000000001A4F
-:10115000023380400000004E023380800000001007
-:10116000023380C0000000200C3383000007A12060
-:101170000A338300000001380B338300000013881A
-:10118000023383C0000001F40C3383801DCD650061
-:101190000A3383800004C4B40B338380004C4B407B
-:1011A00006321AA0000000C206321020000000C85B
-:1011B0000632100000000002063214000000004059
-:1011C00006325098000000040632508000000005EE
-:1011D00004325094000102860632500000000020C4
-:1011E00004322830000202870233080001000000A8
-:1011F00004330C00001002890233080000000000D4
-:1012000004330C400010029906321500000000B4AF
-:1012100002321DC80000000006324000000000D865
-:10122000063217D0000000B402321DCC00000000CE
-:1012300006324360000000D807200400009200003E
-:1012400008200780001002A9072400002CD100000C
-:10125000072480002AE50B350824DC6062DA02AB43
-:101260000120000000000000012000040000000038
-:1012700001200008000000000120000C0000000018
-:1012800001200010000000000120001400000000F8
-:1012900002200020000000010220002400000002C3
-:1012A00002200028000000030220002C00000000A3
-:1012B0000220003000000004022000340000000181
-:1012C00002200038000000000220003C0000000165
-:1012D0000220004000000004022000440000000042
-:1012E00002200048000000010220004C0000000322
-:1012F0000220005000000000022000540000000105
-:1013000002200058000000040220005C00000000E1
-:1013100002200060000000010220006400000003C1
-:1013200002200068000000000220006C00000001A4
-:101330000220007000000004022000740000000081
-:1013400002200078000000040220007C000000035E
-:101350000620008000000002022000A400003FFFE1
-:10136000022000A8000003FF022002240000000069
-:1013700002200234000000000220024C00000000A5
-:10138000022002E40000FFFF062020000000080009
-:1013900002238BC000000001022380000000001027
-:1013A00002238040000000120223808000000030F1
-:1013B000022380C00000000E022383C0000001F45D
-:1013C000062250000000004206221020000000C843
-:1013D000062210000000000206222000000000C0CB
-:1013E000062225C00000024004222EC8000802ADDB
-:1013F00002230800013FFFFF04230C00001002B588
-:10140000022308000000000004230C40001002C565
-:1014100006223040000000A00622354000000010E7
-:10142000062236C000000030062240000000020004
-:10143000062235C00000002006223840000000309F
-:1014400006223000000000080222511800000000AF
-:10145000062223000000000E0622241000000030A7
-:10146000062232C0000000A00622358000000010D5
-:1014700006223780000000300622480000000200EB
-:10148000062236400000002006223900000000300D
-:1014900006223020000000080222511C000000003B
-:1014A000062223380000000E062224D0000000305F
-:1014B00002161000000000280217000800000002B9
-:1014C0000217002C000000030217003C000000047B
-:1014D0000217004400000008021700480000000244
-:1014E0000217004C0000009002170050000000900E
-:1014F00002170054008000900217005808140000E2
-:10150000021700600000008A0217006400000080DB
-:1015100002170068000000810217006C00000080C4
-:10152000021700700000000602170078000007D0C4
-:101530000217007C0000076C02170038007C1004C2
-:10154000021700040000000F0616402400000002ED
-:10155000021640700000001C021642080000000144
-:101560000216421000000001021642200000000195
-:10157000021642280000000102164230000000015D
-:10158000021642380000000102164260000000010D
-:101590000C16401C0003D0900A16401C0000009C52
-:1015A0000B16401C000009C4021640300000000861
-:1015B000021640340000000C0216403800000010F3
-:1015C0000216404400000020021640000000000106
-:1015D000021640D800000001021640080000000179
-:1015E0000216400C0000000102164010000000012D
-:1015F00002164240000000000216424800000000AF
-:101600000616427000000002021642500000000060
-:101610000216425800000000061642800000000238
-:1016200002166008000006140216600C0000060096
-:1016300002166010000006040216601C0000FFFF86
-:10164000021660200000FFFF021660240000FFFF6A
-:10165000021660280000FFFF02166038000000201C
-:101660000216603C000000200216604000000034BA
-:101670000216604400000035021660480000002396
-:101680000216604C00000024021660500000002585
-:101690000216605400000026021660580000002761
-:1016A0000216605C00000029021660600000002A3B
-:1016B000021660640000002B021660680000002C17
-:1016C0000216606C0000002D0616607000000052CB
-:1016D000021661B800000001061661BC0000001F80
-:1016E0000216623807FFFFFF0216623C0000003F4F
-:1016F0000216624007FFFFFF021662440000000F5F
-:1017000001166248000000000116624C0000000053
-:101710000116625000000000011662540000000033
-:1017200001166258000000000116625C0000000013
-:1017300001166260000000000116626400000000F3
-:1017400001166268000000000116626C00000000D3
-:1017500001166270000000000116627400000000B3
-:1017600001166278000000000116627C0000000093
-:10177000021664BC000000010C166000000003E8C3
-:101780000A166000000000010B1660000000000A4D
-:10179000021680400000000602168044000000058A
-:1017A000021680480000000A0216804C0000000566
-:1017B0000216805400000002021680CC00000004D3
-:1017C000021680D000000004021680D4000000043D
-:1017D000021680D800000004021680DC000000041D
-:1017E000021680E000000004021680E400000004FD
-:1017F000021680E8000000040216880400000004BD
-:10180000021680300000007C021680340000003D8B
-:10181000021680380000003F0216803C0000009C49
-:10182000021680F000000007061680F40000000594
-:101830000216880C01010101021681080000000057
-:101840000216810C00000004021681100000000442
-:1018500002168114000000020216881008012004FC
-:1018600002168118000000050216811C0000000508
-:1018700002168120000000050216812400000005E8
-:101880000216882C2008100102168128000000088A
-:101890000216812C000000060216813000000007AD
-:1018A0000216813400000000021688300101012078
-:1018B0000616813800000004021688340101010177
-:1018C0000616814800000004021688380101010153
-:1018D00006168158000000040216883C010101012F
-:1018E00006168168000000030216817400000001E2
-:1018F00002168840010101010216817800000001F2
-:101900000216817C000000010216818000000001A7
-:1019100002168184000000010216884401010101C1
-:1019200002168188000000010216818C000000046C
-:10193000021681900000000402168194000000024B
-:10194000021688480801200402168198000000054C
-:101950000216819C00000005021681A0000000050F
-:10196000021681A400000005021688142008100148
-:10197000021681A800000008021681AC00000006D3
-:10198000021681B000000007021681B400000001B9
-:101990000216881801010120021681B8000000011A
-:1019A000021681BC00000001021681C00000000187
-:1019B000021681C4000000010216881C0101010109
-:1019C000021681C800000001021681CC000000014F
-:1019D000021681D000000001021681D4000000012F
-:1019E0000216882001010101021681D800000001C1
-:1019F000021681DC00000001021681E000000001F7
-:101A0000021681E400000001021688240101010190
-:101A1000021681E800000001021681EC00000001BE
-:101A2000021681F000000001021688280101010160
-:101A300002168240FFFF003F0616824400000002AB
-:101A40000216824CFFFF003F021682500000010088
-:101A5000021682540000010006168258000000029F
-:101A600002168260000000C002168264000000C0FE
-:101A70000216826800001E000216826C00001E0022
-:101A800002168270000040000216827400004000BE
-:101A900002168278000080000216827C000080001E
-:101AA00002168280000020000216828400002000BE
-:101AB0000616828800000007021682A400000001BA
-:101AC000061682A80000000A021681F400000C0825
-:101AD000021681F800000040021681FC000001009F
-:101AE0000216820000000020021682040000001787
-:101AF00002168208000000800216820C000002001C
-:101B0000021682100000000002168218FFFF01FF7B
-:101B100002168214FFFF01FF0216823C0000001330
-:101B2000021680900000013F021680600000014014
-:101B30000216806400000140061680680000000262
-:101B400002168070000000C00616807400000007B6
-:101B50000216809C00000048021680A00000004889
-:101B6000061680A400000002021680AC00000048A7
-:101B7000061680B0000000070216823800008000C0
-:101B800002168234000025E40216809400007FFFD4
-:101B900002168220000000070216821C00000007C7
-:101BA000021682280000000002168224FFFFFFFFB9
-:101BB00002168230000000000216822CFFFFFFFF99
-:101BC000021680EC000000FF02140000000000017B
-:101BD0000214000C0000000102140040000000018B
-:101BE0000214004400007FFF0214000C00000000FB
-:101BF00002140000000000000214006C000000004D
-:101C00000214000400000001021400300000000172
-:101C100002140004000000000214005C0000000038
-:101C2000021400080000000102140034000000014A
-:101C30000214000800000000021400600000000010
-:101C40000202005800000032020200A0031500202A
-:101C5000020200A403150020020200A801000030C7
-:101C6000020200AC08100000020200B000000033C5
-:101C7000020200B400000030020200B8000000318F
-:101C8000020200BC00000003020200C000000006C7
-:101C9000020200C400000003020200C800000003AA
-:101CA000020200CC00000002020200D0000000008E
-:101CB000020200D400000002020200DC000000006A
-:101CC000020200E000000006020200E4000000043E
-:101CD000020200E800000002020200EC0000000224
-:101CE000020200F000000001020200FC00000006F9
-:101CF0000202012000000000020201340000000284
-:101D0000020201B0000000010202020C000000010A
-:101D10000202021400000001020202180000000288
-:101D200002020404000000010202040C0000004052
-:101D300002020410000000400202041C0000000423
-:101D4000020204200000002002020424000000021D
-:101D5000020204280000001F060205000000001215
-:101D600004020480001F02D5020200600000000F80
-:101D70000202006400000007020200680000000B7D
-:101D80000202006C0000000E060200700000000459
-:101D9000020200F40000000402020004000000013E
-:101DA00002020008000000010202000C0000000115
-:101DB00002020010000000010202001400000001F5
-:101DC00002020018000000010202001C00000001D5
-:101DD00002020020000000010202002400000001B5
-:101DE00002020028000000010202002C0000000195
-:101DF0000202003000000001020200340000000175
-:101E000002020038000000010202003C0000000154
-:101E10000202004000000001020200440000000134
-:101E200002020048000000010202004C0000000114
-:101E3000020200500000000102020108000000C878
-:101E40000202011800000002020201C400000000AA
-:101E5000020201CC00000000020201D400000002D6
-:101E6000020201DC00000002020201E4000000FFA7
-:101E7000020201EC000000FF0202010C000000C899
-:101E80000202011C00000002020201C80000000062
-:101E9000020201D000000000020201D8000000028E
-:101EA000020201E000000002020201E8000000FF5F
-:101EB000020201F0000000FF0728040000B5000046
-:101EC00008280768001302F4072C000035D300002F
-:101ED000072C80003A3E0D75072D00003B541C0571
-:101EE000072D800022BC2ADB082DC770471202F69E
-:101EF000012800000000000001280004000000008C
-:101F000001280008000000000128000C000000006B
-:101F1000012800100000000001280014000000004B
-:101F20000228002000000001022800240000000216
-:101F300002280028000000030228002C00000000F6
-:101F400002280030000000040228003400000001D4
-:101F500002280038000000000228003C00000001B8
-:101F60000228004000000004022800440000000095
-:101F700002280048000000010228004C0000000375
-:101F80000228005000000000022800540000000158
-:101F900002280058000000040228005C0000000035
-:101FA0000228006000000001022800640000000315
-:101FB00002280068000000000228006C00000001F8
-:101FC00002280070000000040228007400000000D5
-:101FD00002280078000000040228007C00000003B2
-:101FE0000628008000000002022800A400003FFF35
-:101FF000022800A8000003FF0228022400000000BD
-:1020000002280234000000000228024C00000000F8
-:10201000022802E40000FFFF06282000000008005C
-:10202000022B8BC000000001022B8000000000008A
-:10203000022B804000000018022B80800000000C62
-:10204000022B80C0000000660C2B83000007A1203B
-:102050000A2B8300000001380B2B8300000013883B
-:10206000022B83C0000001F40C2B8340000001F41C
-:102070000A2B8340000000000B2B8340000000056A
-:102080000A2B83800004C4B40C2B83801DCD650013
-:102090000B2B8380004C4B40062A3C400000000480
-:1020A000042A3C50000202F8062A300000000048D2
-:1020B000062A1020000000C8062A100000000002B6
-:1020C000062A31280000008E022A33680000000032
-:1020D000042A3370000202FA042A3A70000402FC57
-:1020E000042A3D0000020300042A15000002030236
-:1020F000062A150800000100022A197000000000DD
-:10210000022A197800000000042A19600002030462
-:10211000062A4AC000000002062A4B000000000404
-:10212000042A1F4800020306022B080000000000DA
-:10213000042B0C0000100308022B08000100000013
-:10214000042B0C4000080318022B080002000000BA
-:10215000042B0C6000080320062A3A8000000014BB
-:10216000062A3B2000000024062A14000000000A72
-:10217000062A145000000006062A3378000000D812
-:10218000022A3A3800000000042A3C5800020328C2
-:10219000042A3C680010032A062A5020000000028E
-:1021A000062A503000000002062A500000000002FB
-:1021B000062A501000000002022A504000000000D1
-:1021C000062A50480000000E022A50B80000000104
-:1021D000042A4AC80002033A062A4B1000000042B3
-:1021E000062A4D2000000004062A3AD00000001400
-:1021F000062A3BB000000024062A14280000000A2A
-:10220000062A146800000006062A36D8000000D806
-:10221000022A3A3C00000000042A3C600002033C11
-:10222000042A3CA80010033E062A502800000002A1
-:10223000062A503800000002062A5008000000025A
-:10224000062A501800000002022A50440000000034
-:10225000062A50800000000E022A50BC0000000137
-:10226000042A4AD00002034E062A4C1800000042FD
-:10227000062A4D3000000004021010080000000182
-:102280000210101000000264021010000003D000C1
-:10229000021010040000003D091018000200035055
-:1022A00009101100002005500610118000000002E6
-:1022B0000910118800060570061011A00000001812
-:1022C000021010100000000006102400000000E0C2
-:1022D0000210201C0000000002102020000000015D
-:1022E000021020C0000000010210200400000001C4
-:1022F000021020080000000109103C0000050576CE
-:1023000009103C200005057B0910380000050580F8
-:1023100002104028000000100210404400003FFF5F
-:102320000210405800280000021040840084924AA5
-:1023300002104058000000000610806800000004F1
-:1023400002108000000010800610802800000002AB
-:102350000210803800000010021080400000FFFFD3
-:10236000021080440000FFFF0210805000000000B7
-:102370000210810000000000061081200000000211
-:1023800002108008000002B502108010000000005A
-:10239000061082000000004A021081080001FFFFC1
-:1023A00006108140000000020210800000001A8028
-:1023B0000610900000000024061091200000004A42
-:1023C000061093700000004A061095C00000004AF5
-:1023D000021080040000108006108030000000020F
-:1023E0000210803C00000010021080480000FFFF37
-:1023F0000210804C0000FFFF02108054000000001B
-:102400000210810400000000061081280000000274
-:102410000210800C000002B50210801400000000C1
-:10242000061084000000004A0210810C0001FFFF2A
-:1024300006108148000000020210800400001A808B
-:102440000610909000000024061092480000004AF8
-:10245000061094980000004A061096E80000004A12
-:102460000212049000E383400212051400003C10A5
-:10247000021205200000000202120494FFFFFFFF79
-:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
-:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
-:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
-:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
-:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
-:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
-:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
-:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
-:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
-:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
-:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
-:10253000021204FCFFFFFFFF02120500FFFFFFFF76
-:1025400002120504FFFFFFFF02120508FFFFFFFF55
-:102550000212050CFFFFFFFF02120510FFFFFFFF35
-:10256000021204D4FFFF3330021204D8FFFF3340BD
-:10257000021204B4F00030000212039000000008C0
-:102580000212039C00000008061203A000000002D3
-:10259000021203BC00000004021203C40000000485
-:1025A000021203D000000000021203DC0000000051
-:1025B0000212036C00000001021203680000003FD9
-:1025C000021201BC00000040021201C00000180805
-:1025D000021201C400000803021201C8000008032F
-:1025E000021201CC00000040021201D000000003E2
-:1025F000021201D400000803021201D800000803EF
-:10260000021201DC00000803021201E000010003D5
-:10261000021201E400000803021201E800000803AE
-:10262000021201EC00000003021201F0000000039E
-:10263000021201F400000003021201F8000000037E
-:10264000021201FC0000000302120200000000035D
-:10265000021202040000000302120208000000033C
-:102660000212020C0000000302120210000000031C
-:1026700002120214000000030212021800000003FC
-:102680000212021C000000030212022000000003DC
-:102690000212022400000003021202280000240398
-:1026A0000212022C0000002F02120230000000096A
-:1026B00002120234000000190212023800000184E4
-:1026C0000212023C000001830212024000000306D5
-:1026D0000212024400000019021202480000000623
-:1026E0000212024C00000306021202500000030610
-:1026F00002120254000003060212025800000C8667
-:102700000212025C000003060212026000000306CF
-:1027100002120264000000060212026800000006B5
-:102720000212026C00000006021202700000000695
-:102730000212027400000006021202780000000675
-:102740000212027C00000006021202800000000655
-:102750000212028400000006021202880000000635
-:102760000212028C00000006021202900000000615
-:1027700002120294000000060212029800000006F5
-:102780000212029C00000006021202A000000306D2
-:10279000021202A400000013021202A800000006A8
-:1027A000021202B000001004021202B40000100471
-:1027B0000212032400106440021203280010644037
-:1027C000021201B0000000010600A0000000001687
-:1027D0000200A06CBF5C00000200A070FFF51FEFBC
-:1027E0000200A0740000FFFF0200A078500003E088
-:1027F0000200A07C000000000200A0800000A000F9
-:102800000600A084000000050200A0980FE0000070
-:102810000600A09C000000140200A0EC555400002B
-:102820000200A0F0555555550200A0F40000555582
-:102830000200A0F8000000000200A0FC55540000B7
-:102840000200A100555555550200A1040000555540
-:102850000200A108000000000200A22C00000000FD
-:102860000600A230000000030200A0600000000784
-:102870000200A10CBF5C00000200A110FFF51FEFD9
-:102880000200A1140000FFFF0200A118500003E0A5
-:102890000200A11C000000000200A1200000A00016
-:1028A0000600A124000000050200A1380FE000008E
-:1028B0000600A13C000000140200A18C5554000049
-:1028C0000200A190555555550200A19400005555A0
-:1028D0000200A198000000000200A19C55540000D5
-:1028E0000200A1A0555555550200A1A40000555560
-:1028F0000200A1A8000000000200A23C00000000AD
-:102900000600A240000000030200A06400000007CF
-:1029100000000000000000000000002E0000000089
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:10297000002E0050000000000000000000000000D9
-:102980000000000000000000000000000000000047
-:102990000000000000000000000000000050008D5A
-:1029A0000000000000000000000000000000000027
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000008D009200920096C0
-:1029D0000096009A000000000000000000000000C7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000009A00DB00DB00E900E900F7BE
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000F700FE00000000000000000000000001
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B2000000000000000000000FE01030103010E90
-:102B3000010E01190000000000000000000000006C
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000119011A00000000000000000000000010
-:102B90000000000000000000000000000000000035
-:102BA000000000000000000000000000011A0152B7
-:102BB0000000000000000000000000000000000015
-:102BC0000000000000000000000000000000000005
-:102BD000000000000000000001520176000000002B
-:102BE00000000000000000000000000000000000E5
-:102BF00000000000000000000000000000000000D5
-:102C000000000000017601B5000000000000000097
-:102C100000000000000000000000000000000000B4
-:102C200000000000000000000000000000000000A4
-:102C300001B501F0000000000000000000000000ED
-:102C40000000000000000000000000000000000084
-:102C500000000000000000000000000001F002354C
-:102C6000023502380238023B00000000000000007C
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000023B02760276028095
-:102C90000280028A00000000000000000000000026
-:102CA0000000000000000000000000000000000024
-:102CB00000000000028A028B0000000000000000FB
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE000028B029D000000000000000000000000B8
-:102CF00000000000000000000000000000000000D4
-:102D0000000000000000000000000000029D02B270
-:102D100002B202B502B502B80000000000000000D7
-:102D200000000000000000000000000000000000A3
-:102D3000000000000000000002B802E600000000F1
-:102D40000000000000000000000000000000000083
-:102D50000000000000000000000000000000000073
-:102D60000000000002E6036D00000000000000000B
-:102D70000000000000000000000000000000000053
-:102D80000000000000000000000000000000000043
-:102D9000036D0374037403780378037C0000000060
-:102DA0000000000000000000000000000000000023
-:102DB000000000000000000000000000037C03BBD6
-:102DC00003BB03C303C303CB0000000000000000EB
-:102DD00000000000000000000000000000000000F3
-:102DE000000000000000000003CB041F041F04319A
-:102DF0000431044300000000000000000000000057
-:102E000000000000000000000000000000000000C2
-:102E1000000000000443044D00000000000000001A
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E4000044D0453000000000000000000000000DA
-:102E50000000000000000000000000000000000072
-:102E600000000000000000000000000004530456B1
-:102E70000000000000000000000000000000000052
-:102E80000000000000000000000000000000000042
-:102E900000000000000000000456045B0000000079
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC00000000000045B045C045C046E046E04807B
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF000048004ED0000000000000000000000005D
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000004ED04EECE
-:102F200004EE050205020516000000000000000086
-:102F30000000000000000000000000000000000091
-:102F40000000000000000000000000000000000081
-:102F50000000000000000000000000000000000071
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000000041
-:102F90000000000000000000000000000000000031
-:102FA000000000000000000000010000000204C05A
-:102FB0000003098000040E4000051300000617C03E
-:102FC00000071C800008214000092600000A2AC0D2
-:102FD000000B2F80000C3440000D3900000E3DC066
-:102FE000000F42800010474000114C00001250C0FA
-:102FF0000013558000145A4000155F00001663C08E
-:103000000017688000186D4000197200001A76C021
-:10301000001B7B80001C8040001D8500001E89C0B5
-:10302000001F8E8000209340000020000000400020
-:1030300000006000000080000000A0000000C00050
-:103040000000E0000001000000012000000140003D
-:1030500000016000000180000001A0000001C0002C
-:103060000001E00000020000000220000002400019
-:1030700000026000000280000002A0000002C00008
-:103080000002E000000300000003200000034000F5
-:1030900000036000000380000003A0000003C000E4
-:1030A0000003E000000400000004200000044000D1
-:1030B00000046000000480000004A0000004C000C0
-:1030C0000004E000000500000005200000054000AD
-:1030D00000056000000580000005A0000005C0009C
-:1030E0000005E00000060000000620000006400089
-:1030F00000066000000680000006A0000006C00078
-:103100000006E00000070000000720000007400064
-:1031100000076000000780000007A0000007C00053
-:103120000007E00000080000000820000008400040
-:1031300000086000000880000008A0000008C0002F
-:103140000008E0000009000000092000000940001C
-:1031500000096000000980000009A0000009C0000B
-:103160000009E000000A0000000A2000000A4000F8
-:10317000000A6000000A8000000AA000000AC000E7
-:10318000000AE000000B0000000B2000000B4000D4
-:10319000000B6000000B8000000BA000000BC000C3
-:1031A000000BE000000C0000000C2000000C4000B0
-:1031B000000C6000000C8000000CA000000CC0009F
-:1031C000000CE000000D0000000D2000000D40008C
-:1031D000000D6000000D8000000DA000000DC0007B
-:1031E000000DE000000E0000000E2000000E400068
-:1031F000000E6000000E8000000EA000000EC00057
-:10320000000EE000000F0000000F2000000F400043
-:10321000000F6000000F8000000FA000000FC00032
-:10322000000FE0000010000000102000001040001F
-:1032300000106000001080000010A0000010C0000E
-:103240000010E000001100000011200000114000FB
-:1032500000116000001180000011A0000011C000EA
-:103260000011E000001200000012200000124000D7
-:1032700000126000001280000012A0000012C000C6
-:103280000012E000001300000013200000134000B3
-:1032900000136000001380000013A0000013C000A2
-:1032A0000013E0000014000000142000001440008F
-:1032B00000146000001480000014A0000014C0007E
-:1032C0000014E0000015000000152000001540006B
-:1032D00000156000001580000015A0000015C0005A
-:1032E0000015E00000160000001620000016400047
-:1032F00000166000001680000016A0000016C00036
-:103300000016E00000170000001720000017400022
-:1033100000176000001780000017A0000017C00011
-:103320000017E000001800000018200000184000FE
-:1033300000186000001880000018A0000018C000ED
-:103340000018E000001900000019200000194000DA
-:1033500000196000001980000019A0000019C000C9
-:103360000019E000001A0000001A2000001A4000B6
-:10337000001A6000001A8000001AA000001AC000A5
-:10338000001AE000001B0000001B2000001B400092
-:10339000001B6000001B8000001BA000001BC00081
-:1033A000001BE000001C0000001C2000001C40006E
-:1033B000001C6000001C8000001CA000001CC0005D
-:1033C000001CE000001D0000001D2000001D40004A
-:1033D000001D6000001D8000001DA000001DC00039
-:1033E000001DE000001E0000001E2000001E400026
-:1033F000001E6000001E8000001EA000001EC00015
-:10340000001EE000001F0000001F2000001F400001
-:10341000001F6000001F8000001FA000001FC000F0
-:10342000001FE000002000000020200000204000DD
-:1034300000206000002080000020A0000020C000CC
-:103440000020E000002100000021200000214000B9
-:1034500000216000002180000021A0000021C000A8
-:103460000021E00000220000002220000022400095
-:1034700000226000002280000022A0000022C00084
-:103480000022E00000230000002320000023400071
-:1034900000236000002380000023A0000023C00060
-:1034A0000023E0000024000000242000002440004D
-:1034B00000246000002480000024A0000024C0003C
-:1034C0000024E00000250000002520000025400029
-:1034D00000256000002580000025A0000025C00018
-:1034E0000025E00000260000002620000026400005
-:1034F00000266000002680000026A0000026C000F4
-:103500000026E000002700000027200000274000E0
-:1035100000276000002780000027A0000027C000CF
-:103520000027E000002800000028200000284000BC
-:1035300000286000002880000028A0000028C000AB
-:103540000028E00000290000002920000029400098
-:1035500000296000002980000029A0000029C00087
-:103560000029E000002A0000002A2000002A400074
-:10357000002A6000002A8000002AA000002AC00063
-:10358000002AE000002B0000002B2000002B400050
-:10359000002B6000002B8000002BA000002BC0003F
-:1035A000002BE000002C0000002C2000002C40002C
-:1035B000002C6000002C8000002CA000002CC0001B
-:1035C000002CE000002D0000002D2000002D400008
-:1035D000002D6000002D8000002DA000002DC000F7
-:1035E000002DE000002E0000002E2000002E4000E4
-:1035F000002E6000002E8000002EA000002EC000D3
-:10360000002EE000002F0000002F2000002F4000BF
-:10361000002F6000002F8000002FA000002FC000AE
-:10362000002FE0000030000000302000003040009B
-:1036300000306000003080000030A0000030C0008A
-:103640000030E00000310000003120000031400077
-:1036500000316000003180000031A0000031C00066
-:103660000031E00000320000003220000032400053
-:1036700000326000003280000032A0000032C00042
-:103680000032E0000033000000332000003340002F
-:1036900000336000003380000033A0000033C0001E
-:1036A0000033E0000034000000342000003440000B
-:1036B00000346000003480000034A0000034C000FA
-:1036C0000034E000003500000035200000354000E7
-:1036D00000356000003580000035A0000035C000D6
-:1036E0000035E000003600000036200000364000C3
-:1036F00000366000003680000036A0000036C000B2
-:103700000036E0000037000000372000003740009E
-:1037100000376000003780000037A0000037C0008D
-:103720000037E0000038000000382000003840007A
-:1037300000386000003880000038A0000038C00069
-:103740000038E00000390000003920000039400056
-:1037500000396000003980000039A0000039C00045
-:103760000039E000003A0000003A2000003A400032
-:10377000003A6000003A8000003AA000003AC00021
-:10378000003AE000003B0000003B2000003B40000E
-:10379000003B6000003B8000003BA000003BC000FD
-:1037A000003BE000003C0000003C2000003C4000EA
-:1037B000003C6000003C8000003CA000003CC000D9
-:1037C000003CE000003D0000003D2000003D4000C6
-:1037D000003D6000003D8000003DA000003DC000B5
-:1037E000003DE000003E0000003E2000003E4000A2
-:1037F000003E6000003E8000003EA000003EC00091
-:10380000003EE000003F0000003F2000003F40007D
-:10381000003F6000003F8000003FA000003FC0006C
-:10382000003FE000003FE00100000000000001FF59
-:103830000000020000007FF800007FF80000026F27
-:1038400000001500000000010000000300BEBC20C5
-:103850000000000300BEBC2000000001FFFFFFFFCE
-:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
-:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
-:1038800000000000FFFFFFFF00000000FFFFFFFF40
-:103890000000000300BEBC20FFFFFFFF000000008F
-:1038A000FFFFFFFF00000000FFFFFFFF000000031D
-:1038B00000BEBC2000002000000040C0000061806D
-:1038C000000082400000A3000000C3C00000E480AC
-:1038D0000001054000012600000146C0000167808C
-:1038E000000188400001A9000001C9C00001EA8070
-:1038F00000020B4000022C0000024CC000026D8050
-:1039000000028E400002AF000002CFC00002F08033
-:103910000003114000033200000352C00003738013
-:10392000000394400003B5000003D5C00003F680F7
-:103930000004174000043800000458C000047980D7
-:1039400000049A400000800000010380000187000D
-:1039500000020A8000028E0000031180000395001F
-:103960000004188000049C0000051F800005A300CF
-:10397000000626800006AA0000072D800007B1007F
-:10398000000834800008B80000093B800009BF002F
-:10399000000A4280000AC600000B4980000BCD00DF
-:1039A000000C5080000CD400000D5780000DDB008F
-:1039B00000007FF800007FF800000174000015008F
-:1039C0000000190000000000FFFFFFFF40000000A2
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A400040000000400000004000000000007FF83F
-:103A500000007FF80000050900003500FFFFFFFFB0
-:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
-:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
-:103A80004000000040000000400000004000000036
-:103A90004000000040000000400000004000000026
-:103AA0004000000040000000400000004000000016
-:103AB0004000000040000000400000004000000006
-:103AC00040000000400000004000000040000000F6
-:103AD00040000000400000004000000040000000E6
-:103AE00040000000400000004000000040000000D6
-:103AF00040000000400000004000000000001000F6
-:103B000000002080000031000000418000005200D1
-:103B100000006280000073000000838000009400B9
-:103B20000000A4800000B5000000C5800000D600A1
-:103B30000000E6800000F700000107800001180087
-:103B400000012880000139000001498000015A006D
-:103B500000016A8000017B0000018B8000019C0055
-:103B60000001AC800001BD000001CD800001DE003D
-:103B70000001EE800001FF0000007FF800007FF8E8
-:103B8000000004480000150010000000000028ADEF
-:103B9000000000000001000100070205CCCCCCC1F0
-:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
-:103BB0000000000000000001CCCC0201CCCCCCCC39
-:103BC00000000000FFFFFFFF400000004000000079
-:103BD00040000000400000004000000040000000E5
-:103BE00040000000400000004000000040000000D5
-:103BF00040000000400000004000000040000000C5
-:103C000040000000400000004000000040000000B4
-:103C100040000000400000004000000040000000A4
-:103C20004000000040000000400000004000000094
-:103C30004000000040000000400000004000000084
-:103C40004000000040000000000E01B7011600D641
-:103C50000000FFFF000000000000FFFF0000000068
-:103C60000000FFFF000000000000FFFF0000000058
-:103C70000000FFFF000000000000FFFF0000000048
-:103C80000000FFFF000000000000FFFF0000000038
-:103C90000010000000000000007201BB012300F3CF
-:103CA0000000FFFF000000000000FFFF0000000018
-:103CB0000000FFFF000000000000FFFF0000000008
-:103CC0000000FFFF000000000000FFFF00000000F8
-:103CD0000000FFFF000000000000FFFF00000000E8
-:103CE0000010000000000000FFFFFFF3318FFFFF16
-:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
-:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
-:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
-:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
-:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
-:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
-:103D50000C30C305C30C30C3CF300014F3CF3CF399
-:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
-:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
-:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
-:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
-:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
-:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
-:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
-:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
-:103DE0000040CF3CCDCDCDCDFFFFFFF3318FFFFFA6
-:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
-:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
-:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
-:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
-:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
-:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
-:103E50000C30C305C30C30C3CF300014F3CF3CF398
-:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
-:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
-:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
-:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
-:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
-:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
-:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
-:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
-:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
-:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
-:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
-:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
-:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
-:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
-:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
-:103F50000C30C305C30C30C3CF300014F3CF3CF397
-:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
-:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
-:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
-:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
-:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
-:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
-:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
-:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
-:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
-:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
-:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
-:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
-:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
-:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
-:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
-:104050000C30C305C30C30C3CF300014F3CF3CF396
-:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
-:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
-:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
-:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
-:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
-:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
-:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
-:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
-:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
-:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
-:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
-:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
-:104150000C30C305C30C30C3CF300014F3CF3CF395
-:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
-:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
-:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
-:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
-:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
-:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
-:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
-:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
-:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
-:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
-:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
-:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
-:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
-:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
-:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
-:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
-:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
-:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
-:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
-:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
-:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
-:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
-:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
-:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
-:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
-:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
-:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
-:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
-:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
-:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
-:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
-:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
-:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
-:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
-:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
-:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
-:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
-:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
-:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
-:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
-:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
-:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
-:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
-:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
-:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
-:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
-:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
-:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
-:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
-:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
-:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
-:1044E0000040CF3CCDCDCDCD000C0000000700C07A
-:1044F00000028130000B81580002021000010230DE
-:10450000000F024000010330000C0000000800C052
-:1045100000028140000B816800020220000102407D
-:1045200000070250000202C0000F0000000800F067
-:1045300000028170000B819800020250000102709D
-:10454000000B828000080338001000000008010002
-:1045500000028180000B81A80002026000018280BD
-:10456000000E82980008038000028000000B802863
-:10457000000200E0000101000000811000000118AD
-:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
-:1045B000CCCCCCCCCCCCCCCC00002000000000007B
-:1045C0001F8B080000000000000BFB51CFC0F00360
-:1045D0008A7BD81818F67020F843015F646260B8CF
-:1045E0000CC45781588099812198918121849178B8
-:1045F000FD19A208F63B210606296106860841A09E
-:1046000079C208F1D3403576220C0C8C22107E2B17
-:1046100090E612A58EFB071AEF94C214DB26816088
-:10462000EFC2228F8C77A3C98B4AA2F2F710D03F3A
-:10463000D0F895222A5F5601429741C55FA3C9CBA6
-:1046400041E56F41FDF54611BBB9B7A1F2009CB43D
-:10465000B6A260030000000000000000000000009F
-:104660001F8B080000000000000BED7D0B7854D577
-:10467000B5F03E73CE9C9949662627214F1E6112E4
-:1046800020028638BC0228F73A212140A575A055A2
-:10469000D1A21D3040C85B8A5E5ADB2F130831025D
-:1046A000DAE08F8A16EDF0AAA8A80123450B7478EA
-:1046B0008A5E6F6FB06A69B5DE888A8A3C22AD4A2D
-:1046C000EF6D7FFFB5D6DE3B73CE6402D8AFF7FE49
-:1046D000F7BFDF1F3FBFC33E7B9FBDD75EAFBDD6D9
-:1046E000DA6BEFB1DB1C4CBF96B1AFF00F9EF53625
-:1046F000C65846ECF9A89D7D2FE866AC60BD6F8575
-:104700003B1DDEEFCEDB91EC632C67CF5A650ABC14
-:10471000CFD9D0A6CC2F8C7D1F7041E57878BF7B98
-:10472000AD5202EF735E6B53E6E1D361639DD09EA1
-:1047300069BE14864F16602C93B1211399F80BB8FB
-:10474000738A191B88FF842ECE1BC98C8D632C6F36
-:10475000A52D1256E07DA87226F332B619E0CA499B
-:1047600083EFD4BFECB763DB06ED44979331A7E644
-:10477000D4BECA672C770EB331780E5EC6DFE3DF96
-:1047800057F07F5ED85A1EC24CE53C2C7BD24FC2FC
-:1047900090CCC33C5FA989E0EDD683A362F394CFAC
-:1047A0000D8DBE4CB7D6FBBD7C2EB9E363FD1EF864
-:1047B000FA716C3794B1485CFBDAB0AEB1ABE0098A
-:1047C00008682FECFDFD4C56528C74B88D4DA167D6
-:1047D000BDE6BB09F1527FD4CEC200777DC3C9725A
-:1047E0002CB3DD0A1B96D7FBFB51CC4EF428618A13
-:1047F0007612E7EB655E9C9F5AE37BB81CF0DC9079
-:104800001C28C37E1F490ED153BECF9E3F3D3B04A3
-:10481000F0942E2A0C33A0FBF9F58ADF019F7FA4C8
-:1048200044743BD0A3FA3B0D45D3A0DD9B7AE83A14
-:10483000FC6E911A6DB1C3F8B5731B0A8002AC53BC
-:10484000E7FC337877C9271AD06D3063E19434A43C
-:104850000B63274C74C0BF13C34559ED1B8F977A68
-:1048600056603F1AF612A1F9CAF779E1A34386C64A
-:104870008DC78A091E867032D6A524A2EBE0174B9D
-:104880008E6A457D8FF79F3F8F309743C01DD2B70B
-:10489000D6A34796037E4B5FB047AF057AD46E54DC
-:1048A000220E28DBF6B902489FB35BA00C74897A0C
-:1048B000746A7FC67052B9DED179FF3550EE7E4101
-:1048C000659BB0DBE1493694BB930276360ECA8015
-:1048D0008F852E5EACDDB8FF36ECAF72B783B99032
-:1048E0009E2F2EFAD635505E04FC864D6AB736E907
-:1048F000FDA1BC38A2B463F9DC1446FC114ED323ED
-:104900005B61BC73DECECC1B405E4E353A990F40E6
-:1049100059E1E9CCFC0EF051556447397E57B55D3D
-:10492000F123DA4B5FD87A2407E7F524F015F0512C
-:10493000F5B664E693F883FF4FC254AE85FA25308E
-:104940004F94FF45ACAD9CA938FE5ADDE789E1EBF9
-:1049500054A341E3F4C8D393300E7C57F7ACE2C7BD
-:1049600029D6D95808E5EAEC8BAE399BDD38BF264D
-:10497000BDC083F3BA47C7768B22F376A1CAAA8A51
-:104980006CD4CBA1BE6AC3467D6121E20DF45E21E9
-:10499000C2D5CF0AD77A3580F85D92EADCA4027ED0
-:1049A000983B903D3B01FF9C6A043556102B57A164
-:1049B0007C933E89E8B34CEDCB9554E2D7EA6D2A5F
-:1049C000F359F889D33F7C8CD33FBCD713D99A17BE
-:1049D000A3DF1283EB4949BF25A9829E5A77712232
-:1049E00078EE477A003C6D882F78AE11F07927B3C6
-:1049F000120DE8E20D30436197E6CF363B9BC7606E
-:104A0000ECD7D982803609CA3ABB83F91933B4DAB4
-:104A1000401994FFC282AFE17C18F3FB8280E71655
-:104A200085CDC1791F4660613E2D393AE1AF6D6A8F
-:104A3000F166551130A76379E1CF57E5D1F76FD013
-:104A4000F71A7C3FAAEFEF8DF28996EF8DF24AF9C3
-:104A5000FD3BD88E392FFE7D5BF9D5D6F1CBABE48B
-:104A6000F71FD0F8EE8BC36F4C9B6C1D7F5A0D7DEA
-:104A70005FEFE0F4EA4E75463641B9D9E50F684874
-:104A8000378D45F1BD9656B009DBA9921F58674096
-:104A900085EFDDDB53C7AC6266BE98F2271CCF03FF
-:104AA000D262E68B948949167E4C0DA459CAD093E4
-:104AB00071F2CA981E0A789D048FDE5F277D51D25D
-:104AC000DF49F0DEB5CF45E5BBAEE6F0DED5DF4D24
-:104AD000728630B01C28EBA1AB0CD37A04702A2C60
-:104AE0009BB1CF95904B196F7EEFB3E1FB249535C9
-:104AF000E07C921C8CF4D13D79C59BC326FCB40E9E
-:104B000002FA42395DD1391E055EEF19B4307B9E41
-:104B1000699C9641FA9C4D85FCFDED6E1C2F98A971
-:104B2000A01ED4BB0B0C77EF711CF9132DE3387367
-:104B30002B699CBCB8711CB99571E338E76C12EF16
-:104B4000C538432E36CE3DF9575BE7935B45E314FA
-:104B5000C5CF27B72A6E9C243E1F782FC6F123FEAF
-:104B6000FA9CCF90C9D6F90CAEA171AEC171C69BAB
-:104B7000E633B8266E1C378D83EF711C30A47C2C75
-:104B80000BE8EEE85E48F4FF958BEC05DD117A0248
-:104B9000FB656FBB18E9131F8C9B857A0516679020
-:104BA0005F4D49A371BE4802FABBCD74E6FA889EF8
-:104BB000A07F16081059042002FD532778B462FB29
-:104BC000ACDC267CEE2ECD9E8776C93A8F7F188886
-:104BD000CED9DDA5FAED09EC9B056DF6935D16FEC9
-:104BE000157A6F0A1BDE00E377A0B231954F82FE83
-:104BF00062A0B74E80FEC2E747C23EFD00F41BD361
-:104C0000CDF036D13C4E6A1C8F2737F075E48BB55A
-:104C1000C7EC60ECE1306F1402DC378A692C680362
-:104C2000E3CF2467F5821EDD2F3A229B881E810187
-:104C300036E073B6BE1FE04AB4033BF30FC21E85D5
-:104C4000BF0136B0656F69DD71189BBDA5CC1BB483
-:104C500004E63BA763AD7D0094CFDABB6EF3BB4D9A
-:104C6000FDCCB19FC0793BE13FECE7E690DD629F70
-:104C70007EB7D25ABE35CE5EAD51F2053DC4B8BE48
-:104C8000881DE975632687E7567C8EC16A83E875BF
-:104C90009BC1BF95F0D4DF6D67515A8FBA3258214E
-:104CA000E22383ECA2905C57E2E0BBCDEE0C0481E2
-:104CB0009EB7FD40253CC6C3DBB52F3960037BA9F9
-:104CC0006BFD1FED687F5F0AFEEF2DB3D6B3301F7B
-:104CD0004FE255F2C14D734AFA7D606A77736846B8
-:104CE000BF0F4CFCF2DDCA5996F2AD0D375BDA7F8F
-:104CF0006FD93C4BFDBCF0624BFDEDAD7758CA0B54
-:104D0000DA7E6069BF687D93A57E71E45E4B7DF5B8
-:104D1000B6B596726DFB2396F6F5BB375AEA6DFB76
-:104D2000465C8FF2B8E24D95A17DF6B9FBE4FD68D3
-:104D30005F7D6E687E6C5387BC0672F8716336F1D6
-:104D4000F7A9461F3DCFEE1EEB447BBC3E09E4199C
-:104D5000D6FA7DCA1FC2AD93518F407BD0E1079434
-:104D6000F7C361709E5E517CC4F7EA7A9D45815518
-:104D70001596D6C3D7DD6AAC5EEB82FAB17DD7ABB0
-:104D8000EBB584F55A9796B0DF734A7701DA77E18D
-:104D9000DF3918DA817DD90FF03700D78BBEEA4FA3
-:104DA000DB5865BB49EF9C546CC407372A534EA2AD
-:104DB0007EAED1B9BCD7ECCC9982FE608D1E2D6839
-:104DC000705F64BC7600260BFBC9A7792D8E0C881A
-:104DD000C92FD16F8845EE97B2D087A89F4FEF5764
-:104DE00049CFB2E8C1DC6F8FC2F10327F13DDB9DF3
-:104DF00041EBE35B8D817E1F803F77BC713A3D7F45
-:104E0000DF18ECF701E89A771AE750F9DDC6103D94
-:104E1000BB1A2BE979A2B181EA3F685C46E5938D24
-:104E2000617A7EDCD84ACF538D6D547FBA713D953F
-:104E3000CF3646E8D9E307087B94A50BFB4FD8EBA8
-:104E4000B07250F9BC98830AFFE67EAB3F1BE5FACF
-:104E5000BCFB8B02B473CF1F07C324817F289FF153
-:104E6000FCD637FD02B4DE2F8C00FDC7F6AE7725E9
-:104E700071FAB86C6C3A03FD73EF309D69307ED2E5
-:104E8000AFAE247B19DE6B8CF465C43FCB93A07F5F
-:104E90009C73D6A5E9D4C31F8FFE4731C61F6E147D
-:104EA000FA30E9A0DAC0E9B6D98F7433E18FDB6557
-:104EB0002F087D1E8747B2E5727AE3F34C86C467FC
-:104EC000672EC601D629C11136E083F31D0E9AD78D
-:104ED000F93DC91186DF627064D2C5F0C6E1A8DE73
-:104EE000E632CCFAA1B63DD5B0EA8B1CC3AC2FCECE
-:104EF0001FDDEC45B95F926D333E188BFC1110FC41
-:104F0000C1F94EF65FDB9E67B82DFD58CBE7DB9409
-:104F1000E9E80781724FF94E02FF403E9764EBC605
-:104F20000720DFA7B60D49C171C18F33709CD38DA7
-:104F300086C1C7CD36CC7C59B32C89DA4BF8FAEA56
-:104F4000F7EF0D1F5A06EF3B19A1FEAB215FDFCF34
-:104F500066DA9F289EC3F6D8BFC075C701FF7F459C
-:104F6000F1008DCAB2DFFA7635ECB80ADF6FB78C84
-:104F700007DFF9A40F8DEB55DF74D7D849535CA038
-:104F80000EC720FFC849740E418F29D0DF39CDDD0F
-:104F9000AAC038D36D3EAAAF17FC58EBECD243F051
-:104FA000EA4C07A7475FE39C6A3CEAD3407F543A48
-:104FB000C12383712ADB4794A17E3CD3B122330401
-:104FC0007C5BAD9EBF2B98E0FB569BC2E189D8BBB2
-:104FD000BB4CF3917114C6A05F670C7EE4F493A6FA
-:104FE00072BCBE96CF07B05FE08FBAEDC7CAAF0103
-:104FF000F8EB767FA6231CD36DA1076C19B1F92BB2
-:10500000387FE8A76ADB7B3ACEEF637BB8E0EE8BB4
-:10501000E8A9DE70BAB3296E27E10BB34EB463E69C
-:10502000F7C4157D37BD0DA2F9C93FDBD92A8083AE
-:10503000FD055A41BD5DD456B0A017F135BFA39A06
-:10504000E28B9FD8A4DDD4568CFC7186D9A6E3FCF4
-:10505000CEB0D7BD634DF8EBB071BB9FB5723B26A8
-:105060000CFF213C60CF5AEC9A45EBADE5856C76A0
-:1050700026EA8D85EBEC2C02285A8C7691E40F9869
-:10508000F7161BB77717B18616B4E73407F70FE6A4
-:105090001B4C1B0070D5FEE2B162B4FB7F69B311FB
-:1050A0007D649C61711A87BB2A3DA207A0FEFD8E1C
-:1050B000B1375E83DCE788B4E0BACC52987F2BEB43
-:1050C0008DCFDB5BADF05D0AFE7878195B6E8143B6
-:1050D000F62BE150B729814802BE7B45F29DD023D3
-:1050E00069AAD5CECF8A2BBF6313F14B95A948E7A8
-:1050F0003386336C4BA17A7F14E3233B1DFE1540AE
-:10510000DF3B6DC12ED4CF6017143153BB3B6D21F3
-:105110007A7F5A796D21DAA74C8B16A17F0F6B8AA3
-:1051200086FCA00B7E5093BC45188FF530583F414C
-:105130002E1D081FF4D3E2A99CC98A30FE0A720A08
-:10514000FDDDE72D3FAA40D9E5EE60D89F23DB1AAD
-:105150005F76F9ACE57AFC07D26138A3384EF2707D
-:105160006B3D2C580CF9CDE3B7BEFFF71E3C4589CB
-:105170006FBDC4D2F074BAA32A8CCF266AA7CD76AD
-:10518000739D93C34F7E39B45F2AECF93AE60B5313
-:105190009C389BF3C1D219368267A9C7E70F43BD7C
-:1051A000A20518CA1FC6AACDEB58FD0510B97EA6E8
-:1051B000B2D6AD235FD65FD05804F47D912DE45173
-:1051C000C723FE0264E73A01595F01C89A7BBAC55A
-:1051D000EE6503D3C4FA3AD030CBEB40A4F3F81811
-:1051E0009DA55EB00BBD08FA224BCD403DD85D4E6B
-:1051F0007E09EB223D21DBE9B17603118EBEDAB9DF
-:1052000062EDF212F557FB8B67768501FF55CF3DB6
-:10521000E805E2B34FB4B64C3FBCAFD9BAD28B7CF1
-:10522000FCB116F6E2BC3F89A8D313F1F38DAA2294
-:10523000FCB1805B417F58D0E9D453ABBF8578FF88
-:1052400062ABDDC026F5DB1C510710B1AE6331E760
-:10525000A76D8EF778F99ECF909EF5BBADF256F50F
-:10526000C4839918EF040C71BF9145C97EAEDBF27F
-:105270006139DA23F5AC9BF444FC7738FE85345A67
-:10528000BFE6E929BDEBE5FE4BBDE0FBFA8ED59FFD
-:10529000A95E2C5BE5BB52F823D3544F3AC5952643
-:1052A000B0094837890716E1F6F08A271F2E7A0FD2
-:1052B000E038BDE59FBD8A256EC4F5C3F9F6DB7FF6
-:1052C000F692AF6FBD7E56F8F3B1EF22F49D6F37C3
-:1052D000B7DFD91EFEACB147BDE82FD56CB4FB419A
-:1052E0003259CD339B7FFE28F2F5EF1C1467A87E60
-:1052F000E6F05B5743B97A873D7D269F865BC98C74
-:10530000D1A31EFE5F362686FFAAE70FEBBE51FC37
-:10531000FD8FD26274A8DEB15F67A37AE3ADB47D7E
-:10532000BFDEE54E408FF6F7CAD1DE5EF1E4973A74
-:10533000CAD527FB149695D7FBFBCA8D87C99E4318
-:105340003C11FD047D7AE8D58B4ED16FBD348EDAE9
-:1053500019B87EF545A791B8F665101F3FFB12C638
-:10536000EF7FEFF0E3FC2B9FFDBE17E7F191D6C076
-:10537000F9F9B195990118B7D21ECE34E8C9DF57B3
-:105380003E7E27F1D9A2637766523C8005726CB4E9
-:10539000868673707E0B36DC40F35BC842C46F9523
-:1053A0008FA9C108C6B334367D470279784DC8C38A
-:1053B000479B1CB8F6B08F50C1A27FF8BA4AFB04D5
-:1053C0008CDD41F1863BE53E045B42E5CF9D9C4E82
-:1053D0009B559B8C6F382D7CBAE59E4EA4CFA9417E
-:1053E000812C8C4F021EC2025F0AEA1DF5D8D42C14
-:1053F0004E1FE6D38AC577A0174BF13DB6EFB40731
-:105400005C4596EFC43AC6C75F2AC607B893D01E5C
-:10541000FB2813EC9B04F3FB52957A19EC0D137FD8
-:1054200099E49ACBF9967BB95C4B398FCC9A8EF57F
-:105430007F7A83CB0F7E87EB3AC015CDA2FAFDDFD2
-:1054400051480F385834913C6FB10B79B6D6CBFD2B
-:1054500049805BC3F529C627D07F1AE19FECB4854C
-:10546000EBE03B935EAEC7F1A89D1E7B6F5AD7174A
-:1054700009F97F5915FBA342FED9062EF77DDBBD46
-:1054800061EE1FD8233F7F14E515E413D7999A677F
-:10549000EC419CF7A7DB0FBE750BF0F5A7ED524E64
-:1054A000AD7A335E4E2B778E6789E4F453B79F2530
-:1054B0009453789F504EDD5DC4C7FFD97A53E2ED17
-:1054C0006C9CDE947AB02FFCC5EBC135AA2FA11ECF
-:1054D00084BF3758716FBE93FC26F9ACEAE9DAC194
-:1054E000143792FC28F9AD871F25BFC5CFD38AB7E3
-:1054F000F8FA1785BE9174B62F67610FC64BF7AAED
-:10550000E45F9F03985A80BEE7B6E74530EEBCD211
-:10551000C5E317E78C6E6F1A3C57A6F2727786DEEA
-:1055200082FA41BEEF76F1F8F6B960B737D5E457A5
-:10553000BCB747F5FAA0BE2BC2A627F23740F3123C
-:105540001C5DACAF7A1E0F9EAABA7397A1DFDEA6D0
-:10555000D27E7645D34D5EDC073EB767C84F503FDD
-:105560002D78050C4C80F71CDA812938BD808679AE
-:1055700009B70B7A7FCCC20F4D86F9DDBE87FB0BD6
-:10558000156BE2EC7BF7521DF50DD8F727AC716D6A
-:10559000CE3755A29FCA0DD6FA2AB686E85615C749
-:1055A0004721E1074ED0041F8D66A3851FC6E31770
-:1055B000425F4D550B7F8276C6B9A33CAE787E8F95
-:1055C0004AF83FBF5D8960DC87E2BB9390FEDD3A1D
-:1055D00033F9CBA791DFF4BEE5F8F40B7F28BE1BAF
-:1055E0009AD4EC7ABBE8A7F03CBDEB7705BFC4F2D8
-:1055F0002F7E9BFB36EBDDBE74DF9F69FFF8DC3E40
-:1056000007C1716EDFCBB97763F925871FE13CB71E
-:10561000DC41FB67E17D9EC830AC1F04F4C67573A6
-:10562000EF97455DB4EE34139DE66B7CBFE3FC9EC3
-:10563000FF7857C1FC833D0E1FCEA37E1FCF0BA961
-:105640007FC9457197737BBF2C0EB9FF7EF3A9D339
-:105650005988F8CFC3E6EC447E4DE5FB00F5BF9CCE
-:10566000B4B909F7C33BF6EBB8BF52FAABBF16A10A
-:105670007E39B793DB0967ED5D8FE33E68AD367425
-:10568000B91DE51E6DB6FE6077DA174C091726C204
-:105690000BC7C339C003CE0BF052897AB12F7C34CB
-:1056A0006BDCDFFCEF878FCF6EC3F16BF64C20B95C
-:1056B00089E14509F0F79E8853A1F9F3F7FBBE2C69
-:1056C00042BBE7D3F6265AC72F35EFCDFFE3E6AD51
-:1056D000442F67DE07FE9BF3FF748DAF4BF172D052
-:1056E0009BCF7F7117959FF5F809DECB94FF13FFD1
-:1056F000D3E8BE13E8EEBD34DD15FB7FD7795F8AB2
-:10570000EEAF08BA7B0CCC2B38B7F7AF142F97F35A
-:10571000BFD4BC7DFF8FCE5BDA3FAB6CFEB67C683E
-:10572000BF86453B7D00E7CAE1B3DB30CC046E4267
-:1057300030913D12B473FF4855781C860DE27121FB
-:1057400026FC094A01F3611C6521D9759ABB85ECD9
-:105750004CA6F93B03808F5523E7FB2957838D39EE
-:105760001EC2F2C0C97E8A6FC6F955CD0A0B2860E9
-:10577000EF6923BF7114ED7CFB705BD45144CFF70C
-:10578000F0798F8863D90DDDE24FB8E3FC0197CF44
-:105790005AEF10FD39D998B67CCC53706B4604C6CD
-:1057A0007797B4D17CDCC3186B33ED033A98E97B6F
-:1057B000E8AF1003B026FBF1EBE2AFA9077F633A35
-:1057C0000388BF11368A6B51521FE1C31F59457EB2
-:1057D00026F71F63F86CE9443C6A0CFC3F3E3FF23D
-:1057E0001B99F01735D18536DC167059DB09BFE8F7
-:1057F00092F4E1F4C8AD11F45962A187C47F02BAF2
-:1058000058E821F1FB75E9124F8F78BC7FC7CEE3D2
-:105810006DF174B2E47764703F240A7EC8CBDB3745
-:1058200053BCE3CC53EF7D0BDB57FF52654EE8E7EB
-:10583000EC760F8BA2FC6A111DFDA9AA0E35619CA6
-:1058400057DAE5D5CF7968BCAA9D8EC84CF8BE6AF8
-:10585000D7FB4564372DEF3E3200E3024F299C7E93
-:10586000E1AE22DCB7ABD2B87F10DFDF063B8F0B97
-:105870009C7E31790EC61F946D3C5FB1AAFD26BB9C
-:10588000C3C46FFFCBCEF35EA11DC973F84985D6A3
-:105890009BDEF071BFE0F4930A876FB73D82798F8A
-:1058A00055DB36EA21F42BB77D4671ECD2E79EF149
-:1058B0007691BFA85AFDE76D2AD1139E44BF783F69
-:1058C000B6AEA396FC84BA76E127C6F951D5CFEDE2
-:1058D000DD1506D4543FFF8417E32FA73AB77AC9E2
-:1058E0003FDDC6FD4FCDAD25F64F2FE597B6DF9BCB
-:1058F000D02F3D85FF007F62BF3DCE9FDFD6EFF208
-:10590000F62F9FF9FC718C939EDEF9E9E30877CDC1
-:10591000FFFEE3E368DFB37D2E632BCCB7FEA93730
-:1059200029DE24BF7B5BC8E9D9412C9C03EDCEFE68
-:10593000CE41F92367F77E948BFEDCD91D7FCE44E0
-:10594000BF7EE9DEA95938EFA52F9466B104F22E87
-:105950009FC89791CB8813C6D3E160C741F243CE6D
-:105960001C7790DFD7135F68AFE5F11A9F882B6C27
-:105970004F1C8795FE705DC7FBE53C3E26FCE24B65
-:10598000C511DE003A5E7519F4DA2EE24471F43A7C
-:1059900083FF00BA7C1947AFCF59E86739B80FD9F0
-:1059A000D1AFCF3842F432F024E3BB47EC019B8EF9
-:1059B00072B033B9874E33914ECF7C9E8BF1F08F0E
-:1059C000EDDD64F774EF7518E8DF57EDFD2DC9C5FF
-:1059D000D9178E51FC948938EB59D6F3C7E3628A04
-:1059E00098DF160F8F3F087C637CC2E7A5F7220E75
-:1059F000C1F955C627FA8A4B4CD045DE93883BD770
-:105A00006E795B6771711E6522D2E93D4B7C5CCE7D
-:105A10003BBE3F03F130C11C5F4B1CF7917E738C82
-:105A20004E3CAE26E36767378AB81BBC1F3806FDBD
-:105A3000411EC7A88F28BF6509E450C6D7C6E871C4
-:105A40007218B9BCB8DAA5E0FD5BF1314CE7EB8325
-:105A5000C4CBE9BF24D6C3DFD4B95C4FB78566EAAF
-:105A6000A6FDECEF897D16892F09EF69918777FAFA
-:105A70002995E2412DED07499FC6CB735D1FE720B5
-:105A80006ED379BCB56EF7FE22D43BA70FBC487C21
-:105A900057B7FD3D3D0CFD1CD9F6BCCEED49CEE718
-:105AA000A8A723263D7DFAD9FD453CEEC7F36EE35A
-:105AB000FBAF16FDD7EFB1F65FBFFD334BFFD5E16E
-:105AC00076DAFFBAD438A7B4C04D38DF539D768656
-:105AD000FAEE54BB3A3D92C80ED4ED967DD0966353
-:105AE0003AAD57E35E4FA2FCDCA5C7A6BF9D82FB83
-:105AF00074206668FF763471BEEAF8716000D2A542
-:105B0000E3D82D2AAE1BBB108F263BB8F88D8652EA
-:105B10000FC86BF13BC171C856F17A60C2719B0529
-:105B20006E18270BF57133F483F9F4983F84FBA3C7
-:105B3000AAB77C3AC2A31A36C39570FDE4FDD9DD3D
-:105B4000418676B9DDB0E62B67CF1671B4A8356F04
-:105B50003D5B67C3711F9CD992FCB81FB064446061
-:105B6000F461CCAB5F904D71E29C6FF3EFCE18EE19
-:105B7000B0EDAAD8BE6DF205E81FF3606C91B57365
-:105B8000E1BB64AD5DC17D007832A4CB9DB6D0266B
-:105B90003D03DBE9CC07AAF1715DD128FF429C7B74
-:105BA00091FDC9767DED07CB7348AA807F88D80F19
-:105BB0001EC4BA14DC0FDEE0E1E79106BBD3E9BCFA
-:105BC000D16661B7F970DF15DB3558D7ED4B9E47CD
-:105BD0006AB596D34B4BEE18EC073F58BFAB540356
-:105BE0007D907E53C98E0106EE4BAF2BC5BCFBF4F6
-:105BF000274A46E740798EA3A88CEAFFB564742E45
-:105C000094BFDF3AA98CEAAB15CA0BDCAB77978659
-:105C1000DD31F9CC00E316F32D406E0FA0DC9E09B8
-:105C20009E6EC1DADA1BBED0F9791816C4F90F9A44
-:105C3000C8E73FD0FDCE0E9CEF605B5713F2DFCF7D
-:105C4000F67E998AED7CCCA0791AACD9C07D7978A2
-:105C500035F1AB8BE4FFC4E7C1487E7F2E39F41BDE
-:105C600084E3DEF9C31F2E479D5AE3273E8ADF27D0
-:105C700066463AD1A542D005E1749AF2902BF12400
-:105C800002E99B3203C751C235EA57577E7D784EF1
-:105C90004A7E11E7C04CE7A43E41381F490ED1337C
-:105CA000FE9CD4013DF829F253CEC20BB908BF3C8B
-:105CB000FF54BAC84D7181F37B58C491407EE473A0
-:105CC0005323CBD086F65DFFA623F4671C37FF571E
-:105CD000BE9D47A1BFAB2A743FA6AE5DB56C5C8686
-:105CE0003696F109A13D21E8968DB444F9BA8BF1BD
-:105CF00073390E25807EE3B9EF1BA47F0756CC24B1
-:105D0000FFE25C725E3BE64F9CBB9BE701C00AAFC3
-:105D1000A01C0CDA931245FF07F8F88B383EFEC240
-:105D2000BACE58C73DF7956F7717F56788FEC0D094
-:105D3000C944B9E17FE7546E679F6BF4111C60168C
-:105D4000EEC7F5F472C7CB7658CFE901DEFB3B4CCA
-:105D500078CF75F449BF3C07A71F3DE3E9B7D0D919
-:105D6000908B725C156C2F47D7F4A385771523535E
-:105D7000BFA987AEC0F635733A8FF09CA18602DCCE
-:105D800067EB4D5F7E1E2B73CFBC263BC62B903E30
-:105D9000BEDE74BC6A993F43EB67A1EB5884FFAA4F
-:105DA0003D9FD9107E49CF87459E7FFCF7FFE85085
-:105DB000C4B8354D768C93ECD6C99E8D6F371D0FC8
-:105DC000558D8F958B9CC5346E968DC73B7AB7E702
-:105DD000EB5FAC5F279DCBEA8B1F8B0CDE1FE0FFD8
-:105DE0001B66FC7FAB6FFCCFC276807F7A7E0DFC9A
-:105DF000DF84EDFBC2BFB4A3AB855EA8C67D14E013
-:105E0000A30F03B33387C2F8E5AA9BE460F156956C
-:105E1000E40FDACFCCC98CE991C5931AF6E37C176D
-:105E20003FA610BF568873A69F8ABCFEF87CA88543
-:105E300073C2B4BFD32B2F2A12E7D7C5E5BBD7C790
-:105E4000F87630CF53E3E7B6542117A58B0A53D029
-:105E50001EDA67F7FD2BD9D9AFA86C5302FC6F444B
-:105E60002633D1755083CD9227CB2A522DFD962D06
-:105E70002AA47DEF251EDF45FDAAC1CBACEB765EE3
-:105E8000D87ACE6848ABF59CD1B0B6FE96F657AC42
-:105E9000CFB7D48F888CB4D45FB96D8CA53CAAFDE4
-:105EA0006A4BFBAB764FB1944747BF61693FF6E859
-:105EB0006C4B797CE72D96F6138ECFB7D44FEAAAB8
-:105EC000B2D45FF3F1124BF91FBA7F68B5536C8CF3
-:105ED000F4234B52485F1E6A9C988BF9D86C9C52F5
-:105EE00086F82C15F98487EED06D86179F0536034A
-:105EF000F4D681053369DD3F744766C047CFE200C1
-:105F0000FA354C9D3C2E51BEE6546352AE392FAA51
-:105F1000D469B7E8B7A986B5BCCB21F6FD0673BE38
-:105F2000F9659C7CD91B2647C13264FD170FCDC291
-:105F3000F140CEF6093DB7EFB2F45C6643319641CD
-:105F4000CE0E25923326D6D912C14FF00CE8981FF9
-:105F500059E6A1F538802F7DF43EAC81BC4C71FA36
-:105F6000071EC679D9FCE9C88465738287787F6289
-:105F70005D66C36D5F675D96729E6D13F96B693CDC
-:105F80007FED91050529CC84DF3F386CC28E6EE32E
-:105F90004FE3A8AB276F35DFFCFEE324CD942FA79A
-:105FA0002C9A49F922D97DE8453D3B7FC616D0C7DA
-:105FB0007A8E8F9EF27DCB1C5BC23CB06EA147A552
-:105FC000BD3522666F75233DCE64BFFE10E629D530
-:105FD000CDED267B2BDBD676C7119CD7ABAA885F8D
-:105FE000FAF8F92A61272F98F1C01D47705FFA5F10
-:105FF00086917E92E36C689C3E43339D231FD88735
-:10600000DF74A593C3F378E3F0191594B76DF0F33B
-:10601000A2A2FFDC706D39DACD8345BEE943B6C478
-:10602000F92E6ED14F16921CE135DC24276716BE7F
-:10603000E3D5601E8FC2EAE5C47DDBAB3A8BB91DA8
-:1060400016F0E339D4DCE8AD0F61FBDC6C8DF25D5A
-:10605000E3C7CF9A1B6ACD83F935A7D9FC6E2A779F
-:106060002BD8DEF123C6FA41FBE6FFAD123CCD078B
-:106070002651FE87C3DDC0703F55CEEB60DAA384A6
-:106080001FB52399D64126F6C565BCF5F3EC8A4EBB
-:10609000B4373E5F67A7F13E87391AD0FFE71D2A64
-:1060A000EDBB1E494B8ADAA0ACB67A68FDCE45DB63
-:1060B00013DA2FECF0447C7931BC68EB27D37918E4
-:1060C000C7403EFFE63477C49D47F34EC7794B384F
-:1060D000E5BC07F5E1679608B873AEE839A7C1904B
-:1060E0008F5543A37E17A4F2739891C689825ED61A
-:1060F000F9B464CFBEFE663C3FF486CA3035C4D7DF
-:10610000D546F35F08F3C7786F3C7ECFF8F2BEB098
-:10611000A9046709C2A9AE2FA779503BF8AEF6676C
-:106120000A7B340FF930349DE8DADF46E7027BD989
-:10613000074E2E5F339C3C2F57CF2E98B1A51F3EA4
-:1061400087925C7CD3D9E7BA1F74727D44CFAF715C
-:10615000BF00ADFF521FA9019BB073B95EEAB19FAA
-:10616000F4D0779D19B1B29AF2A322ECB76FFB6C11
-:10617000C77E1DED333723FB59EACDBEEC33B4CBDC
-:1061800090DFA45DB6386E9E30BF1A31BF9A44F3DB
-:10619000EBA56F6F699076CD12E745ECCA0C3DB167
-:1061A0003E7A52D0A1DED019C59B688D02BDB3D80E
-:1061B00046E78D99167199CF976F704ABB6ECF7E67
-:1061C0001DF10CF3463C6783FF5C4E7AC79E302F6F
-:1061D000FC52FE48FEEAC29D47B13FB07311FAF38C
-:1061E0006DBE94B48BD817F665AFBACC787DC02954
-:1061F000F2B963787C50E0F1C184784C073CDA2C2A
-:10620000F6E1AE021FE1F1A7CE8BD88767BEFD6E27
-:1062100031AE476705BEEA7AFC5CAE9FFBC32285C0
-:10622000F1AA5ACC5F76F232EE07ADC0263998DF7C
-:106230001C7C02FBAFDF6D3D77F863278F9331370E
-:106240003F372BFBCB14FA1EFCEA7FFCD0477AFFCA
-:106250009F703E31FFBAAB18FDAB152F5C91827673
-:1062600059D9AE9B0D7C9E4F1F4AEBD9995D8E008C
-:10627000C279268DE7EB9DD935E108C61F3E6D3CFE
-:106280009A6FD6F7679E3D566C877ECEEC3C56AC37
-:10629000517E70C46217D67EF59B623C8725F3AAB7
-:1062A0007BF8C5C9D789752E1ED7C8C8D45B305FA7
-:1062B000FC42522AE1EBC14CDBFD89E235A83E6984
-:1062C000DFDEA3D33EE59211BE156E8CD7E41994A0
-:1062D00087BB4209E42CC07D96594E3FEE03A4E7EC
-:1062E000B3E1792988C21073033E1D87DAE8B869E3
-:1062F00052A7B11FCD2319C7D14AB9BEEDBE41A7E0
-:10630000BCB164CDF7F05C2867CFD168BD93711D37
-:1063100047323F972CE33A3DF0BC62A77568495E6F
-:10632000A8AD04BE5B32298DBEF3CE7A8BF8E59C16
-:10633000CF16B6E37CB46E8AEFFCA47178C650C069
-:10634000A391639B4136CD5F005BA6FC7FAFC6C2C5
-:106350002960DFAC06FE1F0AFCDFD1E8A4F62D6041
-:106360001F1A69744F42EC9E0F93DCEC6C34A8DD6D
-:10637000CF1BB3E9BB071A7DF4ECB12318FF8ECA1B
-:1063800009F4EB7FD6F3BE467E9F882CFF711CD8A4
-:106390006940EFF4094055C04BBA387F2EEB1F6DB2
-:1063A0007C6548D950810CC067FF1A63E3AA8BC093
-:1063B0009BEE88A4E211E32B5D2C5C3611F3FCBA52
-:1063C000EF2F4FC5F311F794958D003CE2FEF6D503
-:1063D000402AD703CD783E35A7C6D78471BF9CDD50
-:1063E0004A3BAE5F39BBD796E03E02B4A37383B29B
-:1063F000DF0C17D773C9071F51F247E1E602DF9799
-:10640000677B932389CE978E73713DE777F1FDC14A
-:10641000D5625FBD7B969BF462F24117F14BCE9E35
-:106420002B697FCFDDC7BE727C3FC907FF4C71600F
-:10643000B7D2B61FF729D9026E7F4A7EEAEB3B6CD2
-:10644000AF5F46FB737E8DE2C260F6D2FCCECC1A03
-:1064500048F8C6F6663D7E4E4F6C9705049E56DAA8
-:1064600013C7E935C6C719D7D94DFB99786F13E221
-:106470003BE78D3605FDF5330ACFC7E80FF8D8099D
-:10648000E59CC96D74AFD373CE50B90BBEFB93714D
-:10649000BC602580E32AFC7D2E7E27F1A116E94E03
-:1064A000D427397BDEE3E77C6C5D3AE6BF2DBAF793
-:1064B000798A3FAA7A308F9757AEC4F8648637B886
-:1064C00011F984859F2F3B047CF2A038B78C6F5064
-:1064D000EFAD768972B8BD39007CB2DACECB8BEEE7
-:1064E0007D8EF866B53DB818CF3D63B919FA5F9D4A
-:1064F000DA9E6D83B2BBE999E6A383B02CDB3FD370
-:106500001C9E0C76A84BEAE7600EE2BDA76C4079B2
-:1065100094A9ACF13273F2A79C5FEDC13F1F190043
-:10652000FC52B787DF73D383B7DD6B155C8F7EDEDC
-:1065300078D4D7AC093991FA03D6F92BB219F929D5
-:106540007A4489E42B78DF476BA6395FE5BBC98ABB
-:10655000885BC0F7E6F863DCB9363A2A83EB73331D
-:10656000CF0B89A7EB9B49256D4919781E35B44A95
-:10657000453DF88CDDA0BCFA2E8DF4F6699957DF05
-:1065800060277BB0469C73B52F0FAD1A817271AB3B
-:10659000E6C7F842755E5B09DA43D52FE6F99B58EA
-:1065A0002C4FB73AB53D738C3B96A72BCB2B445C55
-:1065B0002A2BB52135B510F763D6E6E27E491D6B6F
-:1065C000BBED8708EF6B2A437EFF64FFA414BC7702
-:1065D000A816CA1807ABED38A687A0DDD549FCBEC2
-:1065E0009BBA0EE01B37BF872650C0D846CD484225
-:1065F0003DFFF340C348348937BB7E5DE6FA07C6EA
-:106600009EC80F1848E75FDD7BBCD98965DD18C1DE
-:106610004663F9DF9A91CFAA47DB28CF9285FFED39
-:106620005060A8D8EF8572AB6BD05473DC3B479CAD
-:1066300033ACDFE0A6F360B02E6F42FEAE5B6F0BB3
-:10664000E3FE99CDD949E7807EE562823ED6F353D9
-:10665000EB14AE0FC30B783C75E98CB46FD0F9A97D
-:1066600095F946F82271DDCA0B49744E4A96AF4E31
-:10667000F251FF955A98F6912A2F78E97CD5DF6F71
-:106680003CA7E5BC56EFF1DC048F1CAF26361ED1CB
-:10669000F5E098571F1A0A745BBAC36E7398F86EC8
-:1066A000E90EB13FEF0A64613F193AC733437F10E7
-:1066B000788DEEB8E1E5B0960DFA5FCA77F87C7395
-:1066C000D964A45BAC9E59E53F80FEF87D49B2FCDD
-:1066D0001FCD650313B44F8A6B9F2FFB575762FF83
-:1066E000F1F06424C5CA4E68AFFDD5D15346F8D643
-:1066F000DAE2FA4B9365F74A1C5FF255EBBDE98786
-:10670000C3C057F7A5B695A0FEEF5EC07C788F1684
-:10671000F2ABDFA46F5B5D5CAE2B2FE45BE81DC3C7
-:106720007B81852E1F35665BF63D17CD5D4AFBB339
-:10673000AD2E412F16E6E76C360C6011533CE8FF96
-:10674000C3F1B7C271751F70FCE37F311C3ECB787B
-:106750003138865AE0FB5BE1D87463C137F2A0C9D7
-:10676000834AD8998FEBC28F795E9C9A5AE66BC2A6
-:106770007D991F6B14D71FC678BE4BBEC68E6A6349
-:10678000507EDA02180761CBB9BD02EF5BED63689A
-:106790001D227F61C81EC73CCCDBC8AF0C2CC627AE
-:1067A0001B5848FB3E729F948938A1DCE71966B0FC
-:1067B00012BCF7EF44D23C5AA7F28373AB31AEAEB2
-:1067C0007AC625E17AF8A02D12C6F1C20FF0F13297
-:1067D0006C917627DA4BDEA106AE77195EAEFFD854
-:1067E000AA425AFF36D9F247DE0170AC544A925E93
-:1067F000413CA7E6537C1CDFE33D3B9BC4BAA5A606
-:10680000FA0D5CA73689756B85D0EFF27D725A70F0
-:106810001EDA113F59356DAA7312EAA1406B3F5839
-:106820006FEE5F356D65F6245C6F7CF94E585FEE58
-:106830004F9AB6D20993D9D4E4EB6FA4C6CAC3FE6B
-:106840000AAB35E989692B03A0779ADD4BAAD0CE34
-:1068500081FAC3E8273E9126F50EAFCF977A0AF565
-:1068600012E831B5A9A71C46BD94DFA377A691DE37
-:10687000D9F2B84AE5A5301EDA31308F30DE0FD6B6
-:106880003D4C23FFC805B02441D935229FF6CF6087
-:10689000DE2C09FDFF11BC5EEE77E8C36CB4DF812E
-:1068A000ED118FAE1CDE5E9FC5CF4BEB1E37F96D31
-:1068B00072FF4415FB7749224F453166911FEC5C0E
-:1068C000336609FA51CEA1D6FD693D2E9F458DCF85
-:1068D0006F7147C9EE6A4B12F1EB7E2C9BEE4D10A7
-:1068E000EFC1521E83CFCC9B9B4BE83E3D0F333014
-:1068F0009F3A3B1465667B493E1DB08EFA4C72E3AD
-:1069000070B340A27C8A85C9DC1E765FD0B89FA890
-:10691000807D83EBA847D8E1C23EB2CB7B8EE2D626
-:106920005D692FD9C57D7A4B674CC9C27349AA3BB3
-:10693000E0443B67BF3186F66954E6BFBEC464EFEE
-:10694000344767507C5233020CED9C57859DA31A47
-:106950007E66B6735A1AC10187B56A737101DD5F2D
-:10696000F3A82BEA1C82F47DD0E647BD71704C552C
-:1069700058C1F8E4324672BAB938730AEE336CD4AF
-:106980008229B7A2BCBC01E3F938DDF83EF70A055D
-:10699000E3E99F3B8329A80FEE4B65163FEAFA64B3
-:1069A000EE8F6C4DE2FA47FA092D004F14E0D02E1D
-:1069B0008CA4FB7C460BBB549F5B46F1324C03C25C
-:1069C000F8A78335840D77ECBE3A47B6CD92FFA881
-:1069D0005D28A278E2D6243E8E1CF71E71DFA02C23
-:1069E0003B59038F1B038F27F2DF6A059C0EB0878C
-:1069F0007C649FC4EDFFF7B68FC85E91F4E9B15394
-:106A0000147E2EB42FFBA8FE82CDA26763E7D97552
-:106A1000D2CB67C57D01320FC42DF4594B76A8ED5A
-:106A20009ABCD8FD009AC8075923EE0560D95AB719
-:106A3000F91C7E32C663A0BE59E48524C79DEB775E
-:106A4000B99792BFE01AAE59CE81395988BE73F812
-:106A5000ACEFB5ECF8FB02C23D796094B7A8B14742
-:106A600014BA1C80DBBB03441ED699E47729DE08E8
-:106A7000F6EE4127ED4BF073A2321EF675EDE357AB
-:106A8000D1AE22BF70FA68EC7711AE4718CF66C15D
-:106A90001CBEE9D8CE286F28C9DFC5F89D63646F96
-:106AA000A952CF859F6F463F2AC36CDF99ECB52B67
-:106AB000573FDFDC5C487E079517DDDB467A70A523
-:106AC0004B96575319D6AB28FA3D6C97C387FC04F5
-:106AD000DF07506ED88D05642FABF9E0D202DC657C
-:106AE00078FF21EE0FEC726C427B16FCDAF92E5324
-:106AF0009CEC8CE7782E2B4CD85FD8D25FEED7EB8E
-:106B00000FC6EFC03C23595FE65D1F55F9773EFC89
-:106B10008E0DEC7C370CFD3FF88283EE2591F72C2F
-:106B2000C7F3EB9464EEBFA3DE30E773EA732B0286
-:106B3000C89C523E1DD949963C7029AFDA85E124A4
-:106B40009FF2BB5793F8FEB1A60528AEA65D282498
-:106B5000F9DF2AE8DAD2685C629CB43EC61943FDCC
-:106B6000F43D4EB1D0134CEC8F6986F91E99BEE40A
-:106B7000357E3F305EBFC9A7D46FFB44FFF392ADB3
-:106B8000F1E5AAF5ED4790857E680B55248FC7BCCB
-:106B9000AF77BCB814D7D8A245286F77F67E5F8749
-:106BA00093FBBE8813146CBBE300B26B4372684363
-:106BB0001294AB92C53E4036AC6B2AAE5B3C6FE99B
-:106BC00011ACC7FC8690EFE1A9A8A7669553FCFA23
-:106BD000B9E4E06FF0BB7B671753AC40C2BDBA911C
-:106BE000E7DB497DE9467C417B87D6C0E39EEE40EA
-:106BF00014ED8B0792DF9CAA211F6A5C0E96AD3EB6
-:106C0000B012E3224ECD4F7CE574DB7CB8BE3BC1B5
-:106C1000BFC375AFC96DA378D20ABC07380FCF1BAD
-:106C2000CC34505E9778F2B3D845F4A3762153E87C
-:106C30005FEBBD3A7FFF71D2E9FB5EF7F71C9C1456
-:106C4000C5FE343FA3FC1944C2FB26BD2AD7F5F884
-:106C5000EFE2FB97F894F8756821C2AB8E76430299
-:106C6000B89E4CB6EEDB6649FD99FA564114DED665
-:106C70002A5D5EB44F402F3E897C5237AAFBD78AEB
-:106C80008FF46926B767C2F2BE02CBFD48322EAF41
-:106C9000BAB95D23E15FF2CA834EF3BE533CBCF147
-:106CA000EBA5BBD09A9FE11C9814775F70131F4728
-:106CB0000B12DFD827079C28274DC61803ED9566D1
-:106CC000CDF7DB00E595D8C96E063BDC32BE7CDE35
-:106CD00027EE073E26ECA8F87A8FB84F39FEFD67FD
-:106CE000C27EB86FFFCDA487FBA21F1EA846FA7A0A
-:106CF000F29981E773EC025EEF25FAED8B8FEEDF00
-:106D0000CFE3BADA4467045DACF8F1547B3080E736
-:106D1000C9D4D18CEC5D75101F1F6869605CD83BCD
-:106D20002E8D0D37ADB3F70E9DCDEF77CE30E87CCD
-:106D30009FEAB10513D999124F8792E53D159C6FD3
-:106D4000B225DF0CFB3DDD836EE29BEE447C7328B5
-:106D500099EB2B84C34CCF7B87E66725A24F4C2F42
-:106D600072BEBA145F7488FB126B1137E0DFD488EF
-:106D7000F3F6A7C53D41F393C57D4106B78BE5FD0D
-:106D8000171D5A2019EDAAF93DFBD4013A9752E399
-:106D90000AA44C42BE3CC6EDDE8F4AF8BD651FD941
-:106DA000032988E78F8EA94A13EDF3F3BC40996756
-:106DB000F591DDB77A24D4DFFE5335D044D5567B28
-:106DC000EE340B8CFD17B46F77ABB47F94F7C03CF7
-:106DD0007514B4AF00430FF9687EA93B8CEB6FC705
-:106DE000EF1BDE453D74FBE30EDF7218E7D0FAB10E
-:106DF0005F60F9E41A8FCF4171B27C05EF155FBA7D
-:106E000036CFA0FDA3654CD81943CB4B8732F6147F
-:106E1000FE53C69D9D74CFB8A80FB694C1FC4666BC
-:106E200074D8DC0053C41D6CC1734E2B9B82D9E80F
-:106E3000FF5DBFA6A005E38F999981CE6B411FAF7F
-:106E40005833BC1CFDC18E47457FE1112DE8EFFD95
-:106E5000D216CA53A0FEA93553CA292F7788ECFF52
-:106E600046AA9FFFB32BBE386E204E2BCB31665601
-:106E70003C57C2535B5E0ABA7DC164595EA2633956
-:106E80003D9959E260F6983F4971B68E1EFFF1AE0A
-:106E9000728C83DD3EA5A15483FEF33C3F6A290436
-:106EA000D198D0566204F0CA5CCF03E5C919786B5B
-:106EB0005EA01AD793919E75E5389FF47ED6FED3D7
-:106EC00055114F65EB5BB0BF1EF8C2DB5A30BE2ACE
-:106ED000DBBF7EDF5B2DE18131BEFF56EC7EA56F0F
-:106EE000BA33E8DEBA231862CB5DD6ADF37C5E918F
-:106EF0007F33B0AB88E71589F2F02E9E772DCBD982
-:106F0000BCDCB13CF13AFF132F97B78EA4C4F53F18
-:106F100076737D0170939E4F39CE02DB13C8518585
-:106F2000DB4DED0E839DE74C8BC9D3F50EC6266273
-:106F30007E9393C329FB89FFFE6E310E0B5F9F8604
-:106F40007C3C53F0F910BFC2F394762747F0F71852
-:106F5000C0CBD2BE0DF3D926E211DB5CEC7BB36073
-:106F6000E8CC2416C27B7332FA41B990BE0FEC70A4
-:106F7000C7FA7B8D8B309B3A24B805FB9B9A9533DF
-:106F80007A455EAC1F80BBD939C602B736310DEBEE
-:106F9000C3FD314ED283CF423E0FE013C2170CF334
-:106FA00034FE7E4047E7C87CD4BF2331E9C6A4E75E
-:106FB0008B3B67D3799AA55EB13FE2E3DF6794F23A
-:106FC000BC97EE1793F9FD99CECE02F37ED6C36E31
-:106FD000916770CFCC87E91C74A79DD1F9851D25D9
-:106FE00017CD3BACC1B89CC96EACD1A2E48FD560C3
-:106FF0005C6E2CF6F71A9D3FC47E7C22FE8C71B528
-:107000008C1589E92FD7C19A0B060BF7EBAD2F63CF
-:10701000FDA7B3F0D84BCF2BD69FD56FECDD9F2EBD
-:10702000E2F802EF9AC0BB9E18CE7D924F01DF3688
-:10703000137F2D10FC26F703CFEE1AB1C9BCFF2A2F
-:10704000CF0D817E7E1A7F1F21DC9944FE4AB11646
-:10705000B80EDB1777A6D1FE80E40FC91792AE1DDC
-:10706000690D146FE97E44A1735CF1701D9670ADDB
-:10707000E7F7F665CD0DA9E67BC6A53C40FF1DA24E
-:10708000FF7113497E1EE3F20072732BCA2FDEC319
-:1070900082F3F07715997F8F40C25F84BC389EE8F9
-:1070A000C8F1FF824BE4AF70BCF5C67FFF4BD03315
-:1070B00097E859DC7980E659D387DC5679BD3C8F57
-:1070C000ED78D4EB83766304FF77B4BF4FF78A750E
-:1070D000EC5699E2E3F346BD55DCA38FC7BF3C05F0
-:1070E000F471564F19F4A50FE9D0A33FA34E67AC36
-:1070F000FD77BDE3A735A3BE14F7F6A6AB7834370A
-:1071000006C79FDCDCBE9A184A1CC76AF07A2C7A44
-:10711000EC916553D8FB30FFABDD3CFF6A625798BA
-:107120007E5747CA75BC9EEAE7E174343CFF97F48A
-:1071300094EB127ACA25F5147F7F186DDE31B8BE44
-:10714000761529603757D80299E87F7D70EC8774EF
-:107150003E6591C8CF1985F939B86E1E0FD2BAF2C3
-:107160000956F23C9D819E0CCCD7B6E6E9B02DFCC9
-:107170005C6B3C5FC5F8282CEC370187580FAE7765
-:10718000743DCBE3195679966580B3CE36C454EF7F
-:10719000E6EB96A403D0BB99EE3916727C6257D603
-:1071A00046D4B7AF7B789E4DFA90C0689CBF944B95
-:1071B0005857059FD8BE37DBCDF5C6EC04FC3BD94C
-:1071C000C3F5EC82F59C6F3AFEBDF43AC47BC7EB85
-:1071D00069A9CB4D7AA24CC8B1EC57EA21F99DAC14
-:1071E0009F22FA9BE6E17251E6E67C877024CA276B
-:1071F0002833ADAFC43FAD9C7F60BE61337FBF2EEF
-:10720000FA8DE153ACAB02CFB53AE017F0B7CD1E23
-:10721000EE8FF949C59D36EAAF62B787F2322BDAB5
-:10722000391E2BDAF6DBAA4DF889EF6FA987CBD18F
-:1072300046710FED611BF01BE2DDCDE13BBB2B87FF
-:10724000F4E7220FB71B2EBD6E5C9E9ED928F2314B
-:1072500080BE94BF58FBD2808D563DCDFB4BEF17BF
-:107260005A81E7F0D21F667ECC29033C45F1DCFF52
-:10727000171EA177F4808EE76DBB1F61B41F3F6CB2
-:107280006E60B40FCAF541F71805FA2B68E37AB8B7
-:10729000781DD83128774EB92EBCB2DD3CDEDD1E1C
-:1072A0008FE51C61C57A8EBF6160FF3C8D4FE8E7BA
-:1072B00059B2E3393C271E6ABF06E34EF2FB564142
-:1072C000FF4BC1578CF08D8BC187FD53FE8A3BB8B5
-:1072D0001CFBADFBCDCE01E67E1FECE977FE14175B
-:1072E000EAF9B5B0EE9074860EE2B98B8A3DA90634
-:1072F000DE9300F26C437F478E5BA1C9DFCBE92AA6
-:10730000C67BC20B7AC69174FDDD33E6F96FF6B821
-:10731000FFAEF4EDD043349FEE1D00AF2F86978E65
-:10732000F679CB5DB84E1C677E5C2724BCC3E6763D
-:1073300079315FA45EAC1F305F1BFA2FE93FF5B1D6
-:107340001588B7CE29744F423C5F4B3A0D675C7E7F
-:10735000A49F361C03FC50DEE32912FA87919F7B21
-:10736000E2A5BD4FF37B2D385DEAE7723A767942AC
-:107370005F7832627208FA9CEE2FAE58D7A38FDA8C
-:10738000F9FBCEDCB980CF5F7BA49C5BE9921E6CDD
-:1073900077D125B382AFCFBC382AB28AD399C6EF52
-:1073A00068F7441405CFD13634A1BF2DF504C2636C
-:1073B000CE5792F0F4D091011D47C5DE0F9BCBFB59
-:1073C000AB0779473EAA511B941C85F400C557B3FF
-:1073D000500F4039AB9DB7637BF8FD0D124F353729
-:1073E00041A7E077FE9BA790E621F19535376AAB80
-:1073F00029C47CE503833F30D1F9A8D82F40BCCC09
-:10740000267F83EBEB1A353810FD5696E5A073A85E
-:10741000B00E917E39EC629A0BFA7B199EB82E4D14
-:1074200055EFA0734253872824C7A00164BC877E10
-:107430008FEBFA6B9379DED65FBE3F14E79991CC60
-:10744000F910FA718A7E9CB40E8AF5E05F73C1AEC2
-:1074500053627AF9B0A2503F87FFE1CA4D2B9418CE
-:107460005F627F683F1D56660DA4F5B22343240773
-:107470007559F2C97AAF675DB9586FF617D1BF8BEE
-:10748000F99BCA3DD380A7264C6F8FE295D34D61FF
-:1074900075DA3FC1B853C1DF74A1FEF472BE3E9CE1
-:1074A0001756BD08D73085EE573E92142AE4F7F4FC
-:1074B000F2713245DC2653E42BA3BD80CF8897EBD5
-:1074C000FF9129FCF903F1CCF4268EF3AC13F5F50A
-:1074D000E25EEB552589F3D9067A154BBCE57AB106
-:1074E0006F81F7FF7AB9DF29F26CF93E07D8F7848C
-:1074F000DFD27BE6D2BEDDE79D37A4F0FB1BB83EB2
-:10750000F85009FCFA26059F41BA3F2FFCA64AF91C
-:10751000EF1F18012FE637D52625CEC32E11F3AB6A
-:1075200015F3FFA891DFB7B000F7D3407F8CF5F2D9
-:10753000792C6AFB7639D27BD13A85F6D3E4BEBD8D
-:10754000A46FE506D5124F5F80FB69FDFE163FCAAA
-:10755000DF871F35CEE247C971E3FDA9138DD996A8
-:10756000B8FFFCB621E29E0BDEFE76E627B86F6F11
-:107570001D60D9FF63AD1997770F28F84FE184F0AC
-:10758000E9A46FE5FB138D4E1636C3F1F150CA7BAB
-:1075900018E80DDD8CF48DC191CCC26638D864FE3C
-:1075A000BB572E1E77053B9CFB2FF0DCE8263B9D4E
-:1075B000EEA9ED898381FE3052501F95CCF38E8F5A
-:1075C000F90D52BE6A2627F61FC6093F779C9BFB22
-:1075D000C729C7A53F9DE443BD28EDF1F8EF1A7A0E
-:1075E000F8D66A4F5E2AFE00FC1B36FB47F1FDB65B
-:1075F000887EBF3EBFE4F7C12F05FF257E77F1E40B
-:1076000010C5F7F0F221CC45995066F5831EF5F2CE
-:10761000F5FC516F327D2FEDEA8AB9D6768F63BBC8
-:10762000F1F84CBEAC788ED97E5786A0FEE3FDC93A
-:10763000DFDDC93BF53AE57FFE0EFD44E8EF584A31
-:10764000602BF2C71A912FBFF1AF07B36F477BE8EA
-:107650005FECB45F5FF2D8D21598CFEC6E570C3A5E
-:107660007FB4DB2A0FDF5CD63EB802F0D12EE8549F
-:10767000E3E7F3A8F147F5A16ECCAFE6E30F6CDFCB
-:10768000AF68267E1B58C9DBBDE4B55BE233FBB0B7
-:107690000CFDECF11AD26FD93F231DDB0734B40384
-:1076A000FAE3EFDD003CFD1B18D9D1FDC729D4FF5B
-:1076B00037C76D54F0F7B7E43C5B6DB30A0DF8AE15
-:1076C0003533D98FEBCD00237408E5ABE69D681404
-:1076D00097C709EF746AE85F8D320287F1BD9C9706
-:1076E0004F35FAA3DD9EFC0E87AFAD27AEC4D71B86
-:1076F000C6560B3B7413B7C7547694717B9CD6F572
-:10770000CCE5C369DD93F3C94C13EB46260B61FE50
-:1077100031B46F253BC5C9D7FDCCE5FCF7F2243D5C
-:10772000637EE68831E8670E5913D5E6C3772F6D7F
-:10773000B025BC5FE37D817798C7BBE6795C4A5F83
-:10774000C976F63EE28C92DF93A727F6DF19BB9F3E
-:10775000EA4B1E4BBF85E4B259A7FB1025FE471923
-:10776000C1CF109EFEED1B15C4CD0991577062D597
-:10777000D30ADA91DF5FCC0C35013FF5C8EBB29D3F
-:10778000832B4C7A13FA277A6C8CCB1397F116570C
-:107790000AF77FE61B4196329EF276C97F5EBC8572
-:1077A000FFEE469FF8B84C7C2995DC2EAF99C37F3D
-:1077B00077B4E4318DE85DDDCC7F77B066FB0E3ABF
-:1077C00067C77EC4FC28EF35ED3B940A18B77AFBF7
-:1077D0000E6581097F036A22945F7D8547EE3B44F5
-:1077E000C96E8EE76B8C17A09D72C4C5E5FD7489C8
-:1077F0003B8CFB10A7EDA11A6C773A27D98FFB942D
-:1078000012DF2FEF9846F71D78763AA2F86CB56D27
-:10781000CA7642BBD691BA1FF96894111A86784984
-:10782000D3821DF87D6ABAC78FFB183E071B43EB56
-:10783000F565E261421C3F4CF81197939B52BC42A4
-:107840002E18E53D5D9BE291F613E9A723763E8F66
-:107850009D8CC31BF106C6A5201F1EE5BF9BD0BF94
-:1078600026AA60BE48FCB8317E0A5C8DF05F3E9C63
-:10787000ED3AEAF56AA1674A1EDBA2BC6F827B067D
-:107880001A55C89FDB372A1827837AD233D09E61D6
-:107890005E52FFEDDC2FAD86FA0526BD22E7914052
-:1078A000BF04713EEE773A0F71FD12E5FB0202DE76
-:1078B000787ACE4DF1D1F8E5601ED07B3D3C1CFDC1
-:1078C000E223F949D49F94F778F99C2BF8BCFF8602
-:1078D0002D8ACD4DFB2764474AF864BB6329534288
-:1078E00088AF09D33B090FB51B349ACF543D38F408
-:1078F0000E933CD4A5703BEEC04DEFD2FD3FEB7E26
-:10790000718CF8B116FC69F227DA8EE937E0BA1209
-:107910007E52C5FDAEEBB849C21E12F7625DD7C1FB
-:10792000F56F6DC70E0DEF91947C9A77EA00DDA795
-:1079300055DBEE60E84701FF2D45FCC4F3A9C48F79
-:10794000D4AF7DD113F410F793C2BA88E785F2D093
-:10795000CF91FA3922EC51E6E6EFD78A79C5F827BC
-:10796000D49262D1AF2E928BBC53630E605E66AD33
-:107970005FA1F392E9A5E277C84C7099FDBE78FD4E
-:107980008871C320F7E373679BCEA9F5E879F1FD11
-:107990003AA4377F1FE5EF593EAED712FE78FA457D
-:1079A00053B85E4FC0678FE13CE2D731B9AEE73DD7
-:1079B000BE53C3FB9224FF5C877437F1CFF6147E6D
-:1079C000EFEEF6148DFA7FA884EF3B3E64E7EBD729
-:1079D000434D4ECAA37CF9669ED7E5B9458FE2F3C5
-:1079E000B06D7E0DD61FEECFE168B52DA773772061
-:1079F00097CF205D0FDCE4655C3F727DB8EE79AE19
-:107A0000CF6AC26EF2736B42DFA9A07CD774979FD6
-:107A1000EE010D1DD26FF0F4E62BDFCEFDF4FBC7B7
-:107A2000D7B573F99374007D4AFC25E541E23586AC
-:107A30004F8E77294F921E11B9CF03FCC2ED23EE72
-:107A400057158A739195CEC011BB0FFD161E7F2D61
-:107A500014E72365FC75BEA04B912DF81ACEB357E1
-:107A6000FCF532FD83EA65AF8EC0DF0FABCA3E4A3C
-:107A70004F29B7E0BF5AE4FB6D41F703C25F3C21D9
-:107A8000F444F5B87692CBEA0F1A489EDDD3B95E7E
-:107A900073BF63D5C78CDD27E6BB86BE9B9ADC5ED1
-:107AA0008EFBC7537FA618E8D7F705E7223C2F8641
-:107AB0007EDE8683DE79885FF13B52F25CCD1F85E6
-:107AC000DE39BD4D15BFABD9A05FCCFEBE547F2CB7
-:107AD000FA8642F79A08DFF0F4F6D2491FA27FBA7D
-:107AE0002D857EE7E4D3EDDFFEC187E9F83B22D7A1
-:107AF000FAD14E485F1124FEE9CE70F937F178ECE7
-:107B0000748C5735B51FF4E2399C4F9EBE6A0CEA5F
-:107B1000ED2483CBFDA9E7D5658897FF0324F17B8E
-:107B20003E008000000000001F8B080000000000E5
-:107B3000000BD57D097854D5D9F0B973670B9949F5
-:107B400066924C36B24C02045412262161916D9219
-:107B50001016599CB014906D640901421220ED87F3
-:107B6000D57E190CA5C823355A1770EB049762B55A
-:107B70003568B441830E0808553F47848A15EC8860
-:107B80001441423245DBE25F5AFFF3BEE79CCCDC96
-:107B90003B1350BFDAE7FFC3E3733CF7DC7B96F798
-:107BA000BCFBFB9E3377FEEAF9B1A38A0959ED9538
-:107BB000120D8490CE5DBFFC577A1221D54FD65955
-:107BC000245A6F7AF6757DC04488C6DBC29EEF8A60
-:107BD000B7C07BE79FB8772C194CDB5B9BB0FDF3FC
-:107BE000275AB0BEFF57CFBFF67FE87B35AE3807C8
-:107BF000BCF7F98BFBF4F0BCC6AD75B6D292B80FEA
-:107C0000E8679B69E9794626C9844C21ECEFC1DD20
-:107C1000FBF4F67C5A6FA5A3D2EFC95CBD77400E8A
-:107C2000FDAE75B776A909DEF0125242C7FDD5E266
-:107C3000916EA8B7DB08490B3DDFA2271E63022D1A
-:107C4000FB101243CB0BA5268F144FD75566DA02D3
-:107C5000E585DFC4CCF5D2EF6AF5813C2BCC6730EB
-:107C600071423DD5A2C1EF6B5AD7EA6A4DF83DF695
-:107C7000F3071D2150E6130F393B88AE9F9027BFB5
-:107C80001E0AE3FD96101BBE3722A68890390B3ED4
-:107C900091603EB183EB75AB719ECFB276BAEAF0DC
-:107CA000F6610D743C3AEED7F0372E5416594C3825
-:107CB0003E05087E97DE56996187F527191CB07E30
-:107CC000B1BEF46A7793993EBFA9C1ED90ED84BC33
-:107CD00072EEE884BEB4FEAB41D250195E97A5C5E2
-:107CE0002EDA7FADC784E3ACD950463EA5F31D0F15
-:107CF000BB48BF4FB690A41BE97A2AB424C9042517
-:107D000021C77445D0FF53D86E371027A178607F04
-:107D10007DCE531BE9270FEADC6925D0CF16BFDEE5
-:107D20000EE5936CFEF47B8BA908FBB3DC08DF1B2C
-:107D3000C93AF8AE7BE3D4A4AD12F6EBD72584E6BE
-:107D40004D48306B763EEBAF18E034C93317DE2771
-:107D5000763DAEEF737805F7D153B0301FCA6D6C26
-:107D6000BE1AE2067C49D6D312E1EACEA9A478B3C2
-:107D7000C452BAD052122A93FBB076355C5B78FBC2
-:107D800027162796645722212323DF13A580FFFEA1
-:107D9000395DFA001DF7FE573F41BCAD05BC85F1CA
-:107DA000DD67F4B00E81B7CBE013BA0F0FEEF90424
-:107DB000F17659BB84F0A96D2FD52FA5E58546270F
-:107DC000F9544BEB1CFF1E94025580D79E3D319613
-:107DD000A7289CBA047E367F7256A6CF73DBD3ECFD
-:107DE000123CDFC3F0F4A046E301381DDC79434BBD
-:107DF00093143ECF8D081FA99A209DD4D613AF812E
-:107E0000B6973ED6707432ADAFA9260E039D57AD1E
-:107E10000A8F721E3FBD19F0C55A438A63ECB0CE7B
-:107E20008F27F4A5FDD7D69012A0D3F4F1CE3D5004
-:107E300027ED121900F56AD73218FFA6A4950E99FE
-:107E4000F66F1DEF6A83F16E4A1AE390697F0F6641
-:107E5000B66E36D2764F05B13C0570D0359769695C
-:107E6000FDC10ABB854292C2EDC954682783F48ED6
-:107E7000A7008FDDCB6AA0BFDAD4F90EC09308FA51
-:107E8000DFB37110CCB7D6DEC71143DF9FD22E21EE
-:107E90005E118F89C0FC6B297CA13EC53BCA0BF3E8
-:107EA000B9C8E127E0D8A5F32F82F975BD64201E7B
-:107EB000DA3E653CC357EBF856E41F6FEE997858ED
-:107EC0002A08E1A5F965830FEA095A8BE400BE444C
-:107ED000661A603E4BF97C9A7564B18B7E679DC4CF
-:107EE000FAE977B784FCE259A0271B941A5EEA39B5
-:107EF0009E37B3D2E22970517CB8C8F71FD184F6FF
-:107F0000BB9AE3CB9A653EA4A79AE7587F490667D8
-:107F1000E1FA30FC4D2A2748C7BB62C8E24AFA7C26
-:107F20009795956A7C7D8FD375CEE3EB70DF97D202
-:107F30007D877D4DBF9B3E07B851BC00B8D17D44C5
-:107F40003CB8296905EEDBD2BBA55B701F3DC308B9
-:107F5000D46D896C9DEAFE8FF3F5ED8A71154BB4F3
-:107F6000BFA0CDECD829C17C9C9A18A8175A1D3BFC
-:107F7000097CEF7A12C6B3A5C4389AC2F81521AEAF
-:107F8000620D1DE75CB299EDB7F75DED8C7CA04703
-:107F90003BB6DB64E223C87F48AE2B3FF45D453F30
-:107FA000D65F05EF6F6AB3A780E43278205C383C77
-:107FB000BC1BFBCC0DE7A71F717878AF2373816FD3
-:107FC0001CD4139311FAB7D071687FC93B473DB1F8
-:107FD00015E7D784EB3A60B1605991E82AAEA7FD66
-:107FE000D9FAB91A002E629D6A782CE1F0D83F6761
-:107FF00051A106F07896C9017477FFABD212C46B19
-:108000008F911225E03DA34342F703E882B8B5B84B
-:108010001FB5F52E6F74BCAF443AAB4D8A71C4489E
-:1080200088F74E947F1E9397E13D937FB19398BC60
-:10803000023E59991FC90F049F01F906F82CE8A2C6
-:10804000766C200FF6F79BF2952E1DA3F32E0A07F0
-:10805000A0234137E65718BD6CDD682F85F6AD9437
-:10806000EEC3F7FB90DE83F47B28B78F03FA8579A4
-:10807000BACC21FEDED7E28AB752F8D56A7C9BB52E
-:1080800039217E5CFBCA5D79EE28F827F8B151CB27
-:10809000F89CD11BEB65FDB2F18C14DCE6222C3D83
-:1080A000208F623730F8A8FBC9B50AF96AB49CA1E1
-:1080B000727C3ADDA4F87E844CD2B873613E6B8C3E
-:1080C0008143746749D686A01EE6910CB20BE8671F
-:1080D00067AC17F856723271BF10A5DF242BE3038B
-:1080E000625F9A13181D25C7B1F7C75A995E516888
-:1080F00065783991BF2FE62FF0DFAE717F42E4DE65
-:10810000E598F88ECE0BDBC57CE8F75B0893BF38AB
-:10811000DFE43BF3766E0DDB8F101D5D5704FBD45F
-:10812000EF6E9F768929348E90A7EAFD87F903FDCB
-:10813000C07A2A07F7FE5EF33E468F6A7C9CCEF536
-:10814000299395B0F774BEBF225DAD35939D30BFC6
-:10815000EDC49948E755F7DA40460FCE601EF4FFAC
-:108160006682FB19D88FE1E3399ED3E733E8F3D574
-:108170005AE231D03D59BD4BE70D1819CD7C4DFF6A
-:108180001B97C0FAEF361B3D32C5F30F13DC0BAD66
-:10819000B4EE29230E1FC8A51F53FE01F4477C250A
-:1081A000C05FEA48200EE05C2BFBF308DDFF2BB13B
-:1081B000EE25F0FE698D3F0B9E1312407C3D191396
-:1081C0005740687F6D7A5FE67FC1BC8FC86427ED3A
-:1081D000E712714E81755CF26B123C741DA7DADFF9
-:1081E000FFCDABF4AB85AF5E5C783B40696BECA236
-:1081F0004768B9C0A8316A8786E071D21C9DBFFE6E
-:1082000098E385AD89E95DC18D062FC047FDDEE4A9
-:1082100004F65EDDE574E2490C7FCEF8689D36A871
-:108220000715B2EE7216F1D0714F6948756B143DA7
-:10823000F39495F1AF368AFAD1DA4F733CDBA5237C
-:1082400079DB613E2D940F02FCB476E417D5BFC8EC
-:10825000716CA5D5B6DCE021D023820F48C8FF4F52
-:10826000EA18DFA17FB38CC342F213D413D00FAB53
-:108270002D1E9F86F28DEA06B34F2EC0E7DAD1B0ED
-:10828000771E8B16F8E0122E1797D6BFF995144774
-:10829000DBB5C4389A7EF79969591C8885AA1FAE48
-:1082A0004F06E53B654133D22768B4A08F4BCEA97A
-:1082B000F2D7B157D3E7B4A8B723BED0FD9D96E05F
-:1082C000F2C27E2F8867F05EB03ED6EB09E37FB343
-:1082D00038BDAAF16C17E0289DEFC712932BEA7105
-:1082E0005E4C289B0AFDFEC3EC7A16F077C1FA8B30
-:1082F0000A7ED625059E7E04F071ADD9F114EB36C9
-:10830000CB15462F87C5B89735B87FDD85FEBC0DE8
-:108310003980F7C1AC0F289C5777182C1E3BB4EB63
-:1083200015FB7FBA9132BEBC30F974AEFF04620215
-:10833000F83B36033E2CDD124B3C8342EB00851BA1
-:10834000F0BBF632C17E9674BC7902F879AD368006
-:10835000F8B3C468C2FDA9BDACC579902DBACE8072
-:10836000F89ECADFC438E721589FE767A3AD676F5F
-:10837000A00F53E8735CBFFB6D78FE506C1C71322C
-:108380007AF10EA4F3BF64B4C7275078D5E9297EEB
-:108390000CC16E5CC630FD8A649895FBDF71E42BDE
-:1083A00098CF32A35B0FF27EF9DC7A3DD0E582787C
-:1083B0005F896570F8BE8F96BFBEE19BEFFB6ECE06
-:1083C000874EE9295D44A1C3D39C2E26034ED2F2E9
-:1083D000543AA39F5359A4FA0528AFA725FDEE549C
-:1083E0002EAF17B1BABA1F7D02A39F53054C5E7919
-:1083F000D631F9A17EEF32DFEF6909CE20C04D3CC6
-:108400001F93C09EBF98E0FC02F089F2C3BF737C4B
-:10841000F559697F0B5E3720BE924DC13CD8C79E8F
-:1084200075E5F1F926479F57DF04B63EDAEFBF60E6
-:108430003CFA9E13F5F6D762BC608790A9943F037F
-:108440003F5E9749801FD371F50936ECD767C5F7B2
-:108450000CB80EB285F2698AB7DD2576DC97ADA53A
-:10846000143F814FEC3558804F087C127814813FBF
-:108470009C8F09397C33C86119E570624209CA6171
-:108480003DD039ED51CFF4C1FEB8DF8867F237DF58
-:10849000EFBD46B68F94DE3313703C5F7E38BD0966
-:1084A000380B3E79AA8F122F9EE27C70007FAF07B7
-:1084B000CE09ECBDA47E4CEE09FBA084EFFB335645
-:1084C0006529E4D8F0494ABDE4198E6FCF58E3C45A
-:1084D000BE1402BC85FC8BD8EF47D97ED3F786C18A
-:1084E0007A1618828B12A9FCFA01D58BF445F8DDB7
-:1084F0006EF82EC24F319EC9DDBA7566027A81339D
-:10850000C1C2E05F1CCC82FEC8A020F2A12584F28B
-:108510001BE9DAFB073E81344A23D3E298DC9164FD
-:108520003A20D0CC206287FE28BCA784C35B3DDE06
-:108530004968A27AE0EC04497B16F6A89014C27E42
-:108540002D7AEF0BF342DAE5458BD1A3A172E487D4
-:108550001AF73CE8A7F3B623A8F79FD4FBF29A4D8D
-:1085600051DAF5BEC71F9242ED8B9F913D7ACA67E3
-:10857000DAFC9D0FCCA178B9C42F3B60C82577FCED
-:10858000F59DE1A04FFB750EB06BA93E71B796CE7D
-:10859000FBA486ED27A957FA051A38BD50BD4A4BF2
-:1085A0008685F893D00B5612DF00D01F9612A71EB7
-:1085B000CAD36B574C25145ECB4D0DC8B7CEAF9BBD
-:1085C0008CFA7215F160FBD22DBAD3E1F26479B363
-:1085D000B2BE62BBB2BED2ABAC5FF811C3B748BC8F
-:1085E000677A98AD3CBA7EF118A7B70BFAE8EDDBD5
-:1085F00038DE96FF6CEA4348FF7E1D31503C69D857
-:108600005B9A42A2BC2FCABACBB9C41B268742FAD6
-:10861000471EF10E85FEAEA03F10FA013BB721C602
-:108620009902F6C885B2E8F37880CFA3EE729F5E18
-:10863000FA8DC37E2FE45E7D9D75978DF85EE4F71D
-:1086400026EC97EA5951BFFFAD805342F4F65FF72D
-:10865000CC2F15E562E83BBB4AFFCA40B95A77D92F
-:10866000A290D3A1F6242657B99F80EEAB07F562FE
-:10867000AEF7518168391B1BE263BA3E6C3E826ED5
-:108680003E9588310DFD6AF7723BC25100FAF1A7A1
-:10869000A07F01DD4EB4BF16A0535D7AFBC83C6DD0
-:1086A0006E88AED4EBA1F8F879204C2FD89F604E9D
-:1086B000C2711DC401E30A7A58745B45BC9BEEDBB2
-:1086C0009FEE284F710F0EC73B0F8E5FAB177A9F3F
-:1086D0004921C7894ACE2F6D3F827ADD32A32B0F05
-:1086E00098D39FF7DE867452455CC9401FDD7B0737
-:1086F00066B9FF17F25DCC67A6E7561DD3E3295094
-:1087000029DDCEE0F399D9C1F44A8DD1A9C3719C7A
-:10871000C46E4946539DCD9732592DAD8FE9993F8F
-:10872000381D0919CDE72FC1F714BE63784996B8F3
-:108730005361DE0618978E1743BCA950368D74D846
-:10874000A11C27B9B46C1E5EDCE709A43E03DED78A
-:108750001803325B279D41327CDF032FAC9B797D70
-:10876000D3AC4B8B96C3739319F98F9ECF434EA412
-:108770007C7310F22523ACDB60F29D87759979E953
-:1087800029637ABA2797389AE86B7D482B81714D17
-:10879000A68B1E58AC855824A8C7582EF9C05EB9C0
-:1087A0006831793443909F1A12819F4A6F57C1BE36
-:1087B00050FECDFC57BDB56B7D682709FE98C0E71C
-:1087C000D7C4F9631A61704822AE7D4E8AD7F799F3
-:1087D000ABA6923810E36E1C7F47DCA4C3305F0069
-:1087E0003CCAF949DAD3E172C6E6D22AF85FCA5C1C
-:1087F000653DCDADAC1BC9490BE8A392CF95FA7589
-:1088000022DA7F83C09FA3E3FC66561F362F813F89
-:1088100079899CBF733DC4C5FD01B5097A827EC4C8
-:1088200064A3910C41BD242F91F9073EA63B4DED69
-:10883000C620F2F3C271CE010F50386F7E4F76DC46
-:1088400049F769B3D9BE510BFADE3C89E9F7DA562C
-:108850001FF8875A16591D5BA13DC679CF3FA1FD70
-:108860003D9980BE55077EF94478D1520ADFB56440
-:1088700059F0BDA4F220FA53837711D4A722F0F463
-:108880000A9D3F85F713880CB49F6596D5CFD1F725
-:10889000D35CB10E29ACFD4968A7F394385EC0F3F0
-:1088A00071C3C0FE657FFD3A0AFD4EF06F386594D6
-:1088B00087751D856F98E83CFAB90B1D80B6FD3BA6
-:1088C00078FC25C9E065F1074AB5741EB38D6C1EAE
-:1088D000751DA53797D0F6FEFEA104E210B187ED15
-:1088E000F36BA04943ED6EF8AE2C16FD5EC7B8FFE2
-:1088F00089707E305C456FA342F88FED85A24ED51E
-:1089000006E730E6D6C07A12A30307117F8C3E6FCC
-:1089100024A13FF8BE3CD41FF2A3F1A1E610BDD1C3
-:10892000A515191D4D35F4BD839513110FEBC0EE40
-:10893000A2FB315CEBDB07F43D8A9785BC244B9AA4
-:10894000119E5B37FAF6EB72C0D5E292A13ECC7273
-:108950005713F43746F2619935F7DE2640AB7DA018
-:108960009C217EB92B801E3757100BE85F4D231CCE
-:108970000E0B6D9A3397F96767CF357AC1DF3F5B8E
-:108980004B585C4CEBCEF901A5AB1F2C607E61A867
-:108990002F08F3BB8838C8316AC7EC8EA20FEC4BA6
-:1089A00064724A7C5FB749AF8837ED4D3461FB1381
-:1089B00089133C89A8A7B97380FE3627727D6C1095
-:1089C00019047C258CEEB722DD97BED51B5F50B60F
-:1089D00073BE30DBF90B1DEAF19C3F083EEC023A16
-:1089E000A4DFF925A70EE0F7611983FFD1D295C85E
-:1089F0001FE610373EA708A27385FB9B2685E94337
-:108A0000749CD92EA57E3467AEB22EF0558C3BCF28
-:108A1000AD6C9F21F4DB494AFD76C17F5DB1A21C9C
-:108A20004C797ACDD7D9185F413F411DDD27165FBC
-:108A3000D1B278CB26BD17F4A4BAF6B5076D40477E
-:108A400077104E47BBA56518FFD92D2D0FD323FAFC
-:108A5000D67825E0FB03E99AFCB8AF418C2B1DD3F7
-:108A600079F741BCE5D84ABA623ACF37F42C6E792F
-:108A7000208678C06F2DF0D33C83F95D291A63FC02
-:108A800024C312EB007CDAA229423FED9638B323CF
-:108A9000DC2FBA7523C5BB30FFACDDC0428CC77A72
-:108AA000B17F8F24323BE74189F9C93DF38C68EFF0
-:108AB000D9FAB91471099B4C4E80BFD19368473CD9
-:108AC0007A90FB4320AE3794965E89E9333DDFCB45
-:108AD0006413FA2755FCC796E8C0B8802D3E1FFDE9
-:108AE000FB733B0A9F447E638A710C9042FDCF75F5
-:108AF000B7689783FFA0A345BBCC14C2BB93025FAA
-:108B000063492CE06B8FBFEF0503FAFB7EA871056C
-:108B1000002F6BF4BE02A2C4E7C0D5E4D80A8E2FA2
-:108B2000BA32D7BCE5743EDDEFE899FFEB0E82F474
-:108B3000FAE21E2BFA2BB53308CA934DA504F1A116
-:108B4000BB4542FDED336B35DA019BA46694135DA2
-:108B5000091370FF56990EA05D5BFDA8EE74B8DE98
-:108B6000B5EA49657D35F1A35D5DF35C043E23FF05
-:108B700012FCB1B64DF91DE9AFE48F859CEF17B932
-:108B80001C332B60EA731DFD985D4D7C06BA8E92F6
-:108B9000B7F5DC4FBC80C94DF2B404FA56B7F99C66
-:108BA000CCE89CF1E312DE9F5A0E95707D6A2CE5AD
-:108BB0005B607F0AFD88BE8FF5039A0E3955139AC4
-:108BC0005731FF4EE865826F8B7D291D41C8088AA9
-:108BD000F7B9497C5F73492EEC2BED1FE901504238
-:108BE0009F80FD7BC06E1BC5C7A3FBEE0139EBD197
-:108BF00018BD80479BA57AE4D346C2F9B5E446BECA
-:108C0000FC3B8F4706B88E24F533A7D2F7461BFDF1
-:108C1000B1000F8A0F7949B6109E34115FD66E49A4
-:108C2000812FD8DE697D2B2ABE08F9E2FB90E91777
-:108C300053E88AA19F0A08F8D0F280C4ECC289A642
-:108C4000FBB5F0FD5B9AC9880F9388570BF3ABB067
-:108C500028F77962AAB23ED91E8107328CEBE4F084
-:108C60009C3248D9EE147C8D28F95A0EB982FB4CFF
-:108C7000EE3AF443F00BC46E208340EFA01A22D2E8
-:108C80009B9A1F4C4AEA355E3229294ABCA49BFBB9
-:108C90007F6F2481AAE7A4487CE93AB8414E0DC30E
-:108CA0002B81C7AFF0FC0AE9751E972D66FEC090B8
-:108CB0009C67F8328CD76E047CA3EFAF1478924D8A
-:108CC000B2014FC6B4C7F8640AD742DECF8D8037F1
-:108CD000452179EED398ECFA5CC00FC716598ED4B3
-:108CE000DB9313EC882743354EC49312E24884FD8E
-:108CF00019616C6DD2C2FCF70CEFEB3629F0620DF6
-:108D0000E28544F102E92A422E2ADB557823F6EF68
-:108D100030D79727124F7F188FB2B103A02FFB7265
-:108D200018DE541027E2C99BB99379DCDAADC57E11
-:108D300088521E961B9578A0C62B3AA2267C5C35DD
-:108D40009EF58637D98037421E265E1B6FEE49326C
-:108D500029F4EA30BCB927A9A477BC51E38BE027FA
-:108D6000BB632CE5A097D6554BC88787BED3BF09F8
-:108D7000EA03D7E460FECB6EAB03F5D6BA7AD65ED3
-:108D8000EC77CA901FD3AF81B7E7B8CAA15EB781AD
-:108D9000C5294A8EB1FC99FE77B0F6C23BEBDF30B5
-:108DA000837CF7B0EF5F39BF598EA3EDDECDFCFBBE
-:108DB000D2E672A8D76D61DF7F067126BABFC34EB7
-:108DC000789BE0F97577E73898F9C9F4D9711C4FA9
-:108DD000774B2FBC81DF35B3EF561C32F621A80745
-:108DE00033BD752C5FE7B847D93A933EBD69929D74
-:108DF000E2EFF2A007F5A6B39A9A61C86F7AB13391
-:108E00004BA5E60C2829DE209F711A295EE7B238AF
-:108E1000E44E3AC45B49CC9F21E277904F109E3FCD
-:108E2000F0561293F7E2BDE404C2E2CD0F9BD11FCE
-:108E30002CE28BBE87880474066BE4F23F6ABC7137
-:108E400062BF7A8C334ECC1671C68076091DB7F09E
-:108E5000EB2F2644F3A71C4D627AEA399E1F219E10
-:108E6000577B73348017BB0149D20148F5BF07BD5A
-:108E700009FDAF4C6878C808D857560F24D56CDD6B
-:108E8000428DF4159A7AAD07844C16B5BF68D7D3D6
-:108E9000FDC4171F1739FF895AE203F944B46CFE69
-:108EA000554D540E4A21BE345BB09DD103904E67A0
-:108EB000F17DBA28F8CD503214F8CD6CBE6F3F303A
-:108EC000D6EB98BC6CD6A9E8FF2F48FF3B7AD59B20
-:108ED00095ED2AFE50CDC7ADE2FAF24A1244BDE04C
-:108EE000ACE4C5F2DC0EA62FAF361D43BDA2FB617C
-:108EF000A627D69000EA1D6AFFE1EA5DCAFA9A56F3
-:108F000065BDAE5D59EFCEF7E038DD3BD60C03FF13
-:108F10005DF5F677D02F5C2DF88457C927A882C459
-:108F2000F8C443D7A3DF4663A47CA218C0D507F3D7
-:108F30004D86126722F00310B25FD3FA5DF0491A32
-:108F4000AD6B5C093694339312CF88F1658CE7BE24
-:108F5000E3B487F6A5C72E54F18942E18FE99F80DB
-:108F6000FE2AC1370AB95E4226A9EDC6FB91FE86EC
-:108F7000F25ABE8DFB53B8DD23F40CFA3DEA197E9C
-:108F80008DC9ABD184EB155EA4C72223951348424B
-:108F90000E23B3579A896A7F0B6D57B79B94EDAA3E
-:108FA000FD1776CB30BEFFF388BB2FECC72CE23A1F
-:108FB00008F2E1E887D50A7BE9C33F4E10FE14B4FE
-:108FC0009BBEBDBDE4FB4EF652CFBEC750FD919691
-:108FD000E533260F7800E2E36D3198F75927B17D2C
-:108FE0004E9E772C2BDC7F78B491D8B46174DF343B
-:108FF000D96084F860938ED91333A69C1AB6248C5A
-:109000006F3C6F2C9D0DF0DA2CF97FF411D81747C7
-:10901000648279351D36DCF74BCDF439C5B74B8FFB
-:10902000DEE0F0D0C717742CDEF899545F05A95024
-:10903000621E551B7E1FA3A5726C85EC7D2D00F171
-:1090400055C9FB720D6D3BAE772F85FE576B7C7A51
-:10905000E6B7F3639C54F4DFBB1FD2837C4CBF9F05
-:10906000C9C5A0D4C7C1FCB89EBCF078D39264E651
-:109070006FFA30C15507E308B927E20927D74E8CAC
-:1090800007D1F02571C6439C53D242CC2E723CC806
-:109090002BD814E6573E19133D2E70878DF1579843
-:1090A0003EF0F734ABF32736E0B7DCFE3BC7E35DB9
-:1090B000E7E258FC6B8B8DC9810EFEDDE3BC3CC73B
-:1090C000E363E7129476A378CFCBBF3BD368346ECB
-:1090D0000ADB4FFB43867A2FE653F1FC9106C2EC84
-:1090E000A43DD696AD61F1D0676DA51D000F5B3F25
-:1090F000A73E0DE0B787C961884743DC78A4C5FD6A
-:1091000020B4D7DA8913E2AEC41ED0CF84F823D8B6
-:109110009DA83F307CE98E61A598D7B3B6CA0E589A
-:109120006FF7DA00EE674FBD92F1C7676D2E1CB77F
-:109130007BB668E7F56D01BEFFCC7F20FCD9BDC5CD
-:10914000C3D4F12F2A38989E1DC3F8983AEEBD502B
-:10915000F0311EF75EC0F9D0C20EE61F5F64249B9B
-:10916000FBD2F6C51D29CC5E8CF3E429E2DE9ED845
-:109170006F95EF20F0B33BD3DF13AF7D382C5EBB90
-:1091800086C7FBD688F5B529D777C4D66BBCF688D9
-:109190002D4ABC569D17F032C8F7FE2178AEB3B009
-:1091A000F557C835E57AE013CB08E691AF3BB2B48A
-:1091B000C948EBEBEE02CF1FFC317D750D87576F71
-:1091C000F3B3B934C4AEF013F721F630BB38CD9DFC
-:1091D000A0A8A3061C9687D9B73A5DF17D667DAE3F
-:1091E000E2FDEC0DD72BDA733C458A7ABF2D372A86
-:1091F000DE1FD05CA6A80FDC7E93E2FD42D22F1EBC
-:10920000E3B18765F09590EBBC3314ED37ECBA45CC
-:10921000F1FD67A4FEC1D1F4BDB618260788C7E9E1
-:109220001F3C2C94779CDFBA44F17D93D43ACC4711
-:10923000DF5FE667FEF621EDAB14FD5D889BC0ECB9
-:10924000081E7FACA7FF181FB7CBA80FB54BE46172
-:1092500029321E59DD71EFE6BE2452AFA07F28E708
-:109260005751390F7A945ACF30279B93101FD24908
-:10927000FAD7617415C20313EA61971E95D19F5600
-:1092800048063E341AE1A3235E7BE47E5D22CCCF08
-:1092900073E939B303FC652B8E2C45FC33A42AF10A
-:1092A00020C6AEC483D8414A3C303B94FB1E3F42AB
-:1092B000B9EF6A385B9D4A3C107014704E9CA4C490
-:1092C0000B01DF11F41FC0B788040F619EB5577200
-:1092D000F84894786F7B0BAEE35A7ADB70153C87C5
-:1092E0001E703699104E2CEF4AE84906EE9F56FB49
-:1092F000CD85FE313199EB3DBC1FE1E7DE2C795085
-:10930000CFE989678DF065F97240DFA927CC5FE26C
-:109310009A926C8BEA57C3E7BDF9D5041C853EB31E
-:109320001AF4193ACE72E246BE7486EB332B4CF730
-:10933000635CF0C21F197CAB8917F9F5B78D978371
-:109340009E48C2FC8D6A384A1D92CF0C74C0F976D3
-:109350003AE9107CDB8D791314ED8CC314F105A56B
-:109360001E4A9C52387F127AA9184FC053F02D31F3
-:109370009E81D4CBA940072A3E4606A9F554A5DF15
-:1093800043F84970B0B038C6F09EF804B313437E7A
-:109390002FE6E790B3739A08E8DF16E1D7F0CF879E
-:1093A000E7C2AFA1B6EFAF15179DE991028FE44474
-:1093B000C643457C952EF3D38FE8C7A3257B268C27
-:1093C00037E3958136A289E697739C7895F6236BEF
-:1093D0008289E1FE32E1BF7E530AE0BC7F409C3FC0
-:1093E0002561FA422D699D303F07FC9F546EC541AF
-:1093F000C9FC3EA45DAD97B278A286AE04F07B3581
-:10940000098B17E684DAB12E47D6459ECBB5E4FB2F
-:109410000D2916EEEF60F93984F33761BFF5662F39
-:109420008978FE413D85495128AFE5E5646E6716B0
-:109430009002E89FD2D52BC9689F533A94C2E9AEF7
-:10944000270F06DB23E84EB57E11CF97CDC5E87711
-:10945000591ABEDE6F000FA147FC8BAE0DF6E7FE7A
-:10946000643BD6D7F439F907273417FB15F98C7507
-:109470007A963F4C5A95FAF3C7C91AAE4F38E56F42
-:1094800002A7DEF781E785F17DF8A6FA90C80B13F5
-:10949000F03B23F86008DEE7147CACC76EEB81F785
-:1094A000B9687C4EC0E36289FF69D827D97C2C1942
-:1094B000E0FC0FB3EB22BC9F79227056D284E655B4
-:1094C0002177623EE8A57619EDA4DA312C4FA87613
-:1094D0000F06CD49578701E382D5ED6FA07ED6D91F
-:1094E000481969FFDEE1D4B35E15BC7BB357C47A7B
-:1094F00074294A7C13F922749D312951F3017AE0D1
-:10950000A06CE77010794A15F2E0F840985D728817
-:10951000EF7B8CD6159F42C72F7E3F230EE0532151
-:10952000771C4A07383448785E699C8178C0DF9F91
-:10953000C6CFAD8D08D43B2C141EA919263C7F3410
-:10954000F087B20BE299A71AD627C0F9AACF1BE978
-:10955000D0D4EE1828695C886FE4858F7F5C0C712D
-:10956000B60598A7BCD0C0E2FF393F8AF5F5A37CC9
-:10957000E2753D3102BDE972EBF17C46D02AA3BD14
-:10958000912493F1805F02CE49B16C1DE279E963C9
-:109590004F4A90CF249E8F6B0A0E5D07F94CB0EFB7
-:1095A00025A1758E2B0F0EAD3785E02CF204893680
-:1095B0009835238C3E8E7078D4DAF49B411E761950
-:1095C000B91DC8ED4162D1221F69E0F1F69303A8ED
-:1095D000458AFDF8CC9097551BE38C1F0EFE2EC8D4
-:1095E00027A0C5971667BC15D76F47BDB981EB5744
-:1095F0005D3CCFBB6172590AD853BDE53F4D4D610B
-:109600007A7E0D8F838BE7355A1FE62DD540DE71AC
-:1096100058DED3B7CD3B16F9E6BDC2C1AA255A0A1A
-:10962000875A89B8AEF6DEABFF92A3DABBEB5334B0
-:1096300057CD835B952229F2DC6A21CF8D3E6AD813
-:10964000539A42A2F4D7236F2EDFA8C8271379D2EA
-:10965000B597C7623E59F9CF3AF19C20F46337853C
-:10966000F2DC7A83F3916406E75AC80F1B1AFE9C5A
-:10967000E151A8FF24DC875F0300C1DFD12EA35F87
-:10968000F6D7873593764699EF76BEFEEB6D5AA4F2
-:109690008F1B7CC4D912657CF19E38470270AECC1A
-:1096A0008F9C5F5B596011CC1FF257A38DB795E378
-:1096B0008B98775B42A08AE3399EE3E8A95B94FB31
-:1096C000F80CDFC7B69B0259781E6972F47C7AB138
-:1096D000DFC3B4F512C02360761F44BD730EAD0C1A
-:1096E0008173003E0DCBA36274D6DBBE87E0AD5123
-:1096F000E41546C25B8FFB2CFA1376C9F9ED32C62E
-:10970000FDCF1FE574499C2689D2D7AD5C6E9D279D
-:109710002C7E70BE59427B64899B900D94BFDCFA0D
-:10972000E46A8CDF543D357433882B787E07E5235B
-:10973000B7A6123296964B3629E3B7CBEE8E88D772
-:109740009070F948D54FB4AFABEE577E574DEEFE53
-:109750000BE83FD52AFD6620F777ED4DE1F6C230E4
-:10976000320CF8FBBAA7BED043EA6E6FF8FE39A5FB
-:10977000EBFE5AE083162CDF4D711E003EFF718A0E
-:10978000FB4DE0DBDDEF31385CAAB9C4F8FEA3493C
-:10979000286F0CC09CE9FF1AE6B338ECCF28BB80D9
-:1097A000F89BC1C0F41BA1D7C9F27A398EB68FFCE1
-:1097B000734302EC5FD2B3132781DE6F7B36D60989
-:1097C000F0DA5AEA2C043FC0D64A13E633180D2CBF
-:1097D000FEEBFDF5C8FD100EE8DF7A6F19D8A196F3
-:1097E0008E7D3EF0936CD1FC05CFA16C19CBF2DDE0
-:1097F000C438751D95BB613E59B398DCD89AE32CEB
-:10980000B484F54BB89E56CB61D6BD77E03D70FE73
-:10981000FD91C3A826D3F5E5A23FEE7AC2F653E444
-:1098200055C1D8E1FA6827953F909C27EAD7B74AF7
-:109830003E1D5DCF9AB6DD18C7A8B9D3973C1FE48B
-:10984000CC335A8C0389F925BD9E5606F11E215F43
-:10985000E64B1694FF42DF9E47C41F8B17CDE57879
-:10986000308FEBD9F363197C971047167C778B9177
-:10987000C4819F7A7E796B09CA9FD53A2BE835223D
-:10988000EED1BB3E10DD5F54FBB4999DA795827964
-:10989000D0C9E7D4FE20CC6F14F57C52522AE3AF36
-:1098A000B5795CEFEB4F9C1067AB7D6D600BF805F5
-:1098B0000C7D583C96F21DE38822D47B8D60CFACA2
-:1098C0007C35C6C7FCD65E7E6ED6590879217533C5
-:1098D000328A303FE104E51F66388F18C8423AA546
-:1098E0007C45A2B22D7FBB65AA16CE0DA653BD8ABC
-:1098F000D6E7A7664DD5527CAFCD0D546968BD69DA
-:10990000FB7056BF3E7016EADBB697B17A51A04A9B
-:10991000A6F55DDB5DEC7B30F02862BDB47DCE54F6
-:109920000FE813562EAF1D013C475CFBCA404DB8F3
-:10993000BFB22595F1A5CFB9DFF5F31CB27806C00B
-:109940007B5000CFA989F77E9A2AF45C96E72BD644
-:1099500029BE23A9D1FB1F9DCAFCC42BF9F9DF71D5
-:10996000B1644B0C8B5779E228FC0F740CC4785B04
-:109970004E6A028717EDA738D48F80A3E84F8CBBBF
-:109980000AE42AF05B1DF39B8AF6C9A98C3FD271C9
-:1099900036E1388319FC6B676414C2BED1FDD2F284
-:1099A000FDD232FBB385CD8FF66B2D40FE3E14FC0D
-:1099B000DE07AED0F77342F356E3C70F387EAC6CC8
-:1099C0006271C6A0B51FE2D1B858A6EF9162E53A20
-:1099D0007671F8B5A45A997DD5B31F29128ED3C4D8
-:1099E000E19841E19EFFEDD75DFD3DAD3B6CBF9C35
-:1099F000709EFF40FB753BC3D723F2B6453F9F6F78
-:109A0000547D3782E54FD526F4C3EF7E16438CF89C
-:109A10009CECECF92EA780E999A07F8AFB1D886752
-:109A20002C3A0B6A38D7E8B9AFA195E711F677B2AF
-:109A3000F3CA33A616F3F559F8FA2CC6B07B1A7A96
-:109A4000E8F158306B9639127F7BE0DED3DFE022FD
-:109A5000DE9F82AEA3F507F4D1DB7E3CCCF1E3DFE1
-:109A6000B61F629E2A78F6C059353F014FA067FCA9
-:109A70006EB0121FC53CB7A58ABC61155DE77CC7F7
-:109A8000F14AD9776B6EE3F9C076253EAF69CBD149
-:109A9000401C5D7C37097CEDB690DF6D6F2AB7DF27
-:109AA0003248462F7970FB52A3FBEBF0B9DA7EEB1C
-:109AB000B6B2FC67B5FFA0DBE6F0C3B93ECF457692
-:109AC0009E7D944ADF8038CC0BA6D0772179A2AC5A
-:109AD000C7A531F845FA838278FEB6D850F6A2DDE4
-:109AE00041C847DBD7207F2E8E2F5B9F43EB81ED54
-:109AF00075ACDEB7EC8B1CCABF4F6FAF67F51BCAE6
-:109B0000BEC8857AEA5A561FE77C51C608C2DAA950
-:109B1000E3D342FAC3A7A976A67F946B08E09141EC
-:109B20005EEB003929E0D95B596CD0D447D34F3B69
-:109B30007BE899C5294670F93C42D8E701ADC23EA1
-:109B4000EF8E63E793BB419ED2F5FE3DD5FD975462
-:109B5000D053623B17E5D0AEEE8CFD580FFA90E47F
-:109B6000A4FA06F83BEC16B200F2EA3AB7BA403F64
-:109B700022AB1C462DC293FB9FE8DABEA6FDBCFAC1
-:109B8000DA33B7F765C3B8601E2339FDD7BDF6D504
-:109B9000DF204E5AF7B9C901EEBD911D3BD6837E39
-:109BA00035B2E3ADAF98BC65E735C4BC47821F91C1
-:109BB0003E1FD16EC0F98FECB86E39BC3FEAFD8E06
-:109BC0007E801F634EFA9A801D74EFFD5D5FC5397C
-:109BD0000DF299F45DCE69F4C0E3CF54798A4778E9
-:109BE00024A6D9001E57305FAACB76747300F534D3
-:109BF000E57918AA97639CF512E9E380788138F734
-:109C0000ADF65B9EA8A4EBA3CFC704E90CC2F4E5B4
-:109C10007197A97D1FA6679712ABA25E6E4C53BCCD
-:109C20005F61C951B44F4CBD4ED13ED95EA8A84F1B
-:109C3000193452F1FE3447A9A27EF388C98AF72B62
-:109C40009D958A7AA1AF55F1FED0C3EDCAF6637631
-:109C5000DC87A1275DE5A0C73BFCEE262887773689
-:109C600097C7DB4984BFB638E06D82E7A3AED497CF
-:109C7000F84894732CABDCE8E78F38C752CACEC3E0
-:109C80007769D8390EE19FBD12EB9E9486FE590A82
-:109C9000760AECB1C66022EC57C5E26D983775299B
-:109CA00048D09FD5A60FFC7C14C8F98532EABD6D5B
-:109CB0003CDFA66D6EBE177C7A27A4C0CB10AFF731
-:109CC0002C64E704C6500D17D70DB14D09F6C9AD88
-:109CD00058772959A9DAA7B58A7A85E536C5FB13DD
-:109CE00053372ADA27DBEF52EDD3BD8AFA34C70E99
-:109CF000D53EB5A8F6E91945FB9833812620A37116
-:109D00009D1ED94CE77FE389E672D89751273D0B1A
-:109D1000815E8A7DEE2660872507EADF80D247EDE7
-:109D200029F053ED6F4CC5F240A31DFD4C871A0777
-:109D30006179B8D181CF7FDF3802CBB71B9D58FE48
-:109D40004FE3242CFD8D2E2C5B1B5BF1FD171ADBE2
-:109D5000B1A410CC04799194D8730F4326D8F35D45
-:109D60009A402D4452FF3B6D1FF2C5AE3E812EA896
-:109D7000DFE9791DF9E24A30A628BDB54049F7F37D
-:109D800067E94E299D96DBD2D873919FD0AA7116B0
-:109D9000827E7D5FDA91BBB59954AFDDE84AB55854
-:109DA00059DD48EBB8D998A775E46EE768427E03A1
-:109DB0002203832647A642BD3B86B56F4B3B82FA02
-:109DC000B58823CF0AC591EF03BA57C7917F73CEE9
-:109DD0006E067FCAD12B03CDB0AEA3DC7FE4248511
-:109DE000BA5B6959AA2DD4815C3CA1D2234459A7FE
-:109DF000297D04FA6DD53866637EF04D3A02F9E8A4
-:109E00003324668FF6E881E94C1E754F33A0BD738D
-:109E10004CE35C8E794F52F07180D78B3B3E44F817
-:109E2000759B83590087DD3B4EB0BA2DF8B8E40826
-:109E3000ABEBD83A7FBDE383A91E53D4753E9F1682
-:109E4000255EDE96C6CFC7FA9C99207F45FD58A5B2
-:109E5000730DC88963A5CE01309FA32E03D28FC78F
-:109E600065F642DE25D13A4B6687F9550AD275B8B8
-:109E70008E597A4667E41639EAB9F3A9E94CCFC29C
-:109E80007D037B6E5E2CEAE1C734D1CF8D2FE3F0EA
-:109E9000B9D027BA7F65793A93836533CDD85F7798
-:109EA000430CC671BB5D03510FEAAEA750A2F4D1BB
-:109EB0007DAEFEE24BD86E10212E8C57CEE77CEAA9
-:109EC000371DEBFF7A9CBEFF7143AC0379B8E57A8E
-:109ED000944FB7F09717261A516F593823B30CE4F3
-:109EE000D27C1EF75A64D62663F84B6BD5C39542D5
-:109EF000CB4C859B41FC572555EAADB45E9DB176B0
-:109F00003394ABFADFAB87A39A3583776F06F5718D
-:109F10000D25AD12B49702EF34D2792DDE20DB99F6
-:109F2000FD24CE1FAEFE567916020F8FF17C190A62
-:109F30005FB40BABD225855D52C5E1F5651AD7DB61
-:109F4000F249FED7CA78CE65C093CE85EFE4F5E23C
-:109F50007757B673BDED0F7A36AEFADE0A31EE0AE8
-:109F6000BEEFC7F4C429811E778B19F1A360EE17E9
-:109F70007796D0F517745834188F177CDCCFEE0F16
-:109F80002B39E3463E37BC33F0F4718278DE0E7431
-:109F9000722D3935D3B311E5C3C82FA9FC01BE78A2
-:109FA000C5FDF1716C4D8A7A2ED3D758CDF9633D3A
-:109FB000F2B5038D1BB07EA8D183E5E1C62D9C3F91
-:109FC0003663FBDB8DDB397FF472FEB80B9F773491
-:109FD000CEC5F2B5463796FF30BB32D3812E8C6E9C
-:109FE000CCD33CB8C3406488377418104F29053C63
-:109FF000FE4812E4C1182C70FE4E9D0FA3E6B73D3B
-:10A00000FBDF16712FC675304E4FFE0BE867D9BDCA
-:10A01000E3CF516237033F294DCF9C06FCE3A8DD17
-:10A020006E06BDB5EC615AA7DF1E75DACD3A5A2F20
-:10A030004FCF6275B7DD6CA0F5F10FF3BAC76E8E26
-:10A04000A1F58AF46CF6BD9760B0FAA6F4FED38051
-:10A05000CF9612E900D043B931673CA4CE56584A96
-:10A060000F001D4C4CBD753CD0C19E343BBBEFC2B4
-:10A07000BEF100D4A70C6AD1C2911BA7A970137CB2
-:10A08000579654A985EFC667ACDD04DF4DE87FAF76
-:10A0900036FCBB4983776F82FA54478B16F4C13D77
-:10A0A000692C0E2AFA1175D12EF8ABC8D71AD2E155
-:10A0B000423E5ED0EE423E2EE05236ABF2A7E0A723
-:10A0C000AB6B972C12CC6396D41384879CB8DA2B95
-:10A0D000945A289F9D973EC4BC917E5707F51BB1AB
-:10A0E000BE6D6374BEBB283D8A7CF980D329C84D00
-:10A0F000C88BFE40CFEEF5780DD687FEC35BCDB79B
-:10A10000627F6E33C8D703694C4E1EE6E5655EFE7E
-:10A110009397751A6735C8CFBA741E4F8CA4EBF5A8
-:10A12000E98C6E55E7057A69E774FDC3741E5FE636
-:10A13000F727AC21EC5CD1B5F2B65686DB6F3990CF
-:10A140009FD37A08F246D579103570DEA85F643E59
-:10A1500030E58B2CFFB15D9947DA637FF4617C0FAA
-:10A160008E3182D1F1F3DED77DDF35D67D5FB475D8
-:10A17000AF242CCF59BD0EE2B6216D89BCE7C8F5DE
-:10A1800004A2AF27621DFC9E3E55BE35D58376C224
-:10A190007C2A169B09F86FC2F9C4F1ABF00935DFD0
-:10A1A000F977F1B3ABF09BDFC13CD5FC469C7B5605
-:10A1B00097429F83F352907707F7BE809F7E63B2EA
-:10A1C0007B3FD0477759F06F1AB0CF92028867690A
-:10A1D00056F741E85FD2B3F8BBC8673DA7F1FC165C
-:10A1E000F4A2F7D25722DFE902E140E9F108AD839A
-:10A1F000DE33D2E27A0BFA238318FEF496A7799421
-:10A20000CBC5C89228F215BB5BBECA423FD635F01B
-:10A21000BD373854C8A303702EE0D2885854793A19
-:10A2200025E2938A20EF3A19F588CE4CBD16CA7FF5
-:10A23000B79DD8999987FDABEDC5CEB4114636EEE2
-:10A24000844950B6EBDDDB6F053B69A401EDA477D3
-:10A25000799EDFF4D35792405E4D977DC90552A495
-:10A260009DD979644199BD20D2DEA4EB1B0FEBBBD5
-:10A2700096DDE932FA13008C6AFBB366C3DF08E4AB
-:10A28000478FDA7085C0FD65D7B647890C6CA2E8A8
-:10A2900084E30D284BCE38311D67D8B9FA37A01C9E
-:10A2A000F92533CFAF955774E3E5D637D831F1C1EF
-:10A2B000CA7B1746BCC5EC555E46DCEBB6CAA3CCE0
-:10A2C000572BF595601E851C8883F2A21440BF971A
-:10A2D000AC61F731887B18A81D9BD3D706762FCBAE
-:10A2E0009B1A07F9467472153FFE70D1ED48F7319D
-:10A2F000A8FFF4D8B12F69304FA04DEB8C1F037627
-:10A30000EC86018E8DB4FE27BFED8157695967F940
-:10A310001B09BFEFAD66C32545BD7363E8BE20C80A
-:10A3200087AEF9978C72A786902DB05F3564BF7E9B
-:10A330005D981C24AD7FE981FB10CAE72A017028D3
-:10A34000078DD39DF4BB4A6E6F107217AB733B8BB6
-:10A3500078CE4DC3BA8DBFEF59C0DA3345FBC2E9A1
-:10A360004E3A4EE500D1DFDE69584F1375DEDF75DA
-:10A37000A2FE007B3F477CFF12ABE78BF1DF67E378
-:10A3800099D9FB373D72DB74E00382BFBBFA2AEF39
-:10A39000F9A1FC7E565FDB55F34A94ED5C1E887B89
-:10A3A0007D2A7E3C39F61DA0E7560973E06AEED09F
-:10A3B000A17FFB42426B41F839659187E22A373B26
-:10A3C00041DF5BF3F2C09D32CFCB017DE37E9E8FF8
-:10A3D0005F219B301E71E96EC6E77BD3D7AA36BCDE
-:10A3E000A2D8CF88767EEF3206EAE87817B7A56064
-:10A3F0009E3BE9EFC778F8BABE92B8BF11CFB98AD1
-:10A40000BCAFA47EC409F669D2EF62D8BD9667FCE2
-:10A41000C87FAB7EC7FCBD6B76BC81726E896C4712
-:10A420003C7E27C7BD01E0D36566F717566D780DF2
-:10A43000E9B5299BEB0996E0E070787AFA72B91CCD
-:10A4400082FFA6BE255785BFB2FD7B86BFDACF2C23
-:10A45000CE49AFFA96F9695D66160775F07D3AAD9B
-:10A46000B10FE3F07A1CD67371B93FCF2A43F2B033
-:10A470003F99E51DBD5D0276D0A57A33DE77B460E5
-:10A48000FDA982F0F329A254EBFF9D4047B610BC12
-:10A490009E8BC4EFD66BE077EB7F12BF53B401BD48
-:10A4A00003E2A627D8FD63C3FCA7F5E1F92EFEBEA3
-:10A4B0004CEEC6B7B338913A6FCBDFD7CCF4241E3D
-:10A4C0008F5933E3EDD1108F11F4302E96B4827F83
-:10A4D0009DE2B583E3B503F05AE06F282E43BF8BAE
-:10A4E000425F21FC25388E80D3079170FDE81A78F1
-:10A4F000FBD17F126FDBA8FE8B71CC9762D07FA25D
-:10A5000086F3BF385C05BCE333AE0EE7F88CEF078B
-:10A51000CEF11976A5FF81C3BB37F9A4DE1F31EF59
-:10A5200028745AF25DE8F4E7999C4F6903982FAAC2
-:10A53000DEF7E48C887D4FCFB8FABE2BDBBFE77D1A
-:10A5400057C34D5DD6F0F8A6FAF9888C5EF9DDBFE9
-:10A55000058EFFBFF9CF17D6EF53B42FDE7044D16D
-:10A560007EABE73D457D74C05F0E682EFCE163CF96
-:10A570000551BFFCAE7EF5DEFCE9D35F5CA18178BE
-:10A58000DB083FF3E7FF35D3BD2D83C2F95D8DB7FF
-:10A59000C94CE13AFC642BBBBFAB3A0FF387D6F34F
-:10A5A000397E31FAEF1FDF4EF1E60B62407FA76F75
-:10A5B000DF755A7B7E241E945ED61067581E5AA9FA
-:10A5C000D1AA75A2BF8638A3E1CD7D1C6F30FF876D
-:10A5D000D2FB5C23D125513A9F3B57C27CA7B9845B
-:10A5E000E545D3D2E7A6EDD3B5C407F724579AB40F
-:10A5F0003E03C6F994E79A0DFC1E659294A838DFD5
-:10A600002C3B65CC4B9B3D82C5076F31B5E2B9D27F
-:10A610007987EFBC783B6D279B3C252CEF5A9C43F8
-:10A62000FBA3E6DBC4FDEECB6074DE2DF138B2A4F3
-:10A63000C37BB222E44106F38F4E9737CA90EF12E4
-:10A640007C8FA0DE2DE88EAEEFB0A1889DB380DFB9
-:10A65000B1A8243ADF403CF77C6F39BC5F73CC8EE5
-:10A6600070A91BB1B100F6B16EBCF489A12064D70A
-:10A67000D46DF812FBA9909F6B82F72F9D60AEF00E
-:10A68000E19DD44EB187FB2B038B802EAF65FF88F5
-:10A69000799F6CF4213E7DDC7818CB77C7BE5502DC
-:10A6A0007A46A0D11FD52FF95DFD03C22F20FC04EF
-:10A6B000820F88FBF93A32385F304A7DF15E352DE2
-:10A6C0002B05BFDC1FC95F0F655C5D5F51B67FCF97
-:10A6D000FCF59BE2794D2A938B6AFC56E3B5C06783
-:10A6E000B8FF1B7EBFE016AAEF815C9D4F3CF93599
-:10A6F00094CFCE5DD1AC1B257D77BC5E653A93458A
-:10A70000A29C37F9F6FCDC8EEB97CB65B40F447E48
-:10A7100082D887AF3222F4F87F5E432EFEF33F29C2
-:10A720001723E5DA9945DF4DAE11853E909A1981E0
-:10A73000AF199957C75765FBF7BCEEB073308B6400
-:10A740004DE8DC07E40F831ED7ED65E71AAB739A7B
-:10A75000F1DE79322218077AE3CABD32E221D13A1A
-:10A76000B56961F74E7512DF1F001F578C5E81E7D8
-:10A77000E122EE8B32B5E1F938F5BD51225FB89692
-:10A78000F7A3BE3FAA96E709D7AAF2764A33797EA5
-:10A7900070112962F9154ABD545D763512855FB294
-:10A7A000EB4A23FA01263FF6D2CF3DA343FB707359
-:10A7B0006604BECECCBC3ABE2ADBFFC3F82A9B9F00
-:10A7C000C47351DF165F0D766735CC5BF0E1059001
-:10A7D000C345C75DF0AAC10BBF0F20EEC9EE96D8E6
-:10A7E000BD34DD9F10F41B5DEB9EE591C7DC78AEB8
-:10A7F00073F8DB4E99E511B07C03A1A708BD655441
-:10A80000675066F7E1F3F3503C2FE89BF22F87DFA8
-:10A81000827A8EF0BFFDBBFCD642CEED35DA919E3A
-:10A82000857FB038E0423DAE4BE72B817BED3D7B31
-:10A8300062A2EA013B323557BDCFF51F66F70E80A5
-:10A84000FB4CCEDFC5BDAE1532BBF7F9925F46FFBC
-:10A850005DC34FDEFFED23F66BDBF575964B51EDD7
-:10A860002251D669D87989A2723BE6ED81BD04FEFA
-:10A870003BE1CF53BF7F30BBEC59985F853C1AEF6B
-:10A88000D9BCB49DCDA7B77DA9DB10C4F17B6DE722
-:10A89000E3D7ED2DB184DF8BD199D9639F59CE1ABF
-:10A8A00043FBFA4DF77F4C70AE42BFF97FDD6E98E7
-:10A8B0002E53D591CAC77CC9CBF453C2F4D405C476
-:10A8C0008FE52212C4D24D583EFD12E2C0721971BA
-:10A8D000613927DB1DC8C4FC966032E643BEFC8F9D
-:10A8E000C1803717C78E6A86DCB9EF4B4FEB2EB4A9
-:10A8F000E3F8DD2FFD230BF25AAE794F7E9CF38BEC
-:10A90000CC28F1E4FF2995317E428AD721BFAFE4FC
-:10A91000B72590F12C2E767F720EE24388FFA5B406
-:10A9200008FE07F1D6FC4F342C3F64A584F7BAB675
-:10A930000734485AF9CB73BC704F4F7B1B6BCF5F0A
-:10A9400063F54AB49E3F3286B5AFB57AE1DCC342C7
-:10A9500012407A5C0CA71E643807C3F89BB8079DA9
-:10A960006AECB9A0672DEF30B2FC7D12E80F7CBC19
-:10A97000A017FBE6E62CA6EF0FC9657C7B4899D2B1
-:10A980000F61E3ED0DD965F559B4FC719633398B40
-:10A990002E7548827FEB2F8AD12F8FBFCBF2D9C87B
-:10A9A000DB307E28BE7B24BBAC2FBCFFBCC4F2CD09
-:10A9B0003D7BF9EF17906072F8BDA273B2CB73A024
-:10A9C000BF415984DF531F1DAEF0FB75AE28F69CC6
-:10A9D000C8671C023615FAC3D9FD54CF4BAC3E32C2
-:10A9E0002BF9E64D26F4E17B40AF7D24DB5D84F35B
-:10A9F000D7136282F93F66F0EE44FDB33E0BFC9143
-:10AA00002B1E3768402FF8908A553857F251A31102
-:10AA1000CB53D4CE85F24FD4CE85F2136AE742F9F8
-:10AA200029B573A15C7ED9419186906359CE29598D
-:10AA3000B650BC4D3DDFF1598CAFF68CBF578FE35C
-:10AA40003764BB11BE3DFBBD8778211EF2BC359833
-:10AA50009E70157CEB9DCF30B888F89FBAFD463EBE
-:10AA60008F82362DCAF182F6405C55D87BF3B2D87E
-:10AA7000EFA9E5BF7406CF8976597AE0EB94E892A6
-:10AA8000A76B587D5ED660846F43B6B31ED64DE982
-:10AA90007B219405EDEFDF07E77968FF9847D02D1C
-:10AAA000051F443D5FB50E351CC4BA9EB7FAB7C248
-:10AAB000F7CFBF940B2BA1FC8630BA013C92A2AD1C
-:10AAC0007723CEF76643B018CEA9DCFCB51C356FF2
-:10AAD000B821BB14E16C12F826E0C4F7EBBBD275C9
-:10AAE0004F3C9BE32911F76C00EFB4831CBA1207AB
-:10AAF0007A5D258FD7B7B7F57F17D6E7392C930145
-:10AB000076C45F05DD3DC1F74794F97BF52ED8A7E4
-:10AB1000E7F79EED0FF7B0D27DE90FF7B2FE226B9B
-:10AB200000B68BEFF2477EF5F02F92F07DFCDDD082
-:10AB300079A4A502F249E61BF71D84252DB47C52A9
-:10AB400001F9248B53A54350DE6ACF990079242262
-:10AB5000DF7DE9A0D243404A531D95A88F9502732B
-:10AB6000099307E5C6587E29B4903F898AFAC4D470
-:10AB7000BE8AF727DBFB29DAA70CBA41D12EC69D86
-:10AB8000EA18AA786F48423017EC2FBA0E760FF603
-:10AB90005332E6DDE5BF74ECA61B687DFAD3B3F152
-:10ABA000DEBFE779FBF417CAF1F708BB293CF5547F
-:10ABB000913A37E2AE077F019DA9F4FB9ABD4F1C85
-:10ABC00072DAAFA2DF5F43AF17FC757587B104F887
-:10ABD000EB37D5F3D5FBE2CB52EAFDBDE14B0F3DA0
-:10ABE0004876862FFCDE2D35BE107227C73F564EA5
-:10ABF0003FCACE817D5B3EF667E06361E7307B4A0A
-:10AC000095BF6D88DEF1EE7AF0BFBF23133C57C7C6
-:10AC1000CFE755C1FFCB213C27CB5A7E0AF74AD15B
-:10AC2000E71ED03FE11CA893F67F398BEB4D35FB37
-:10AC30007E9A561C6A270D9F28DE2777489B15F5BC
-:10AC40004D39CAFADDA59BC3BFEF8D1F566DBF55A9
-:10AC5000EFC6F39B52D4DF7F15F3A9D81F83F97990
-:10AC6000D320EF843EAA2D7E4F0BF1D569BDC84F8E
-:10AC7000C177E6C9A43E5ABB9CCDFA9DBA3F06F304
-:10AC800059BE6DBF1F525862BEE0EF98FCFC30DE2B
-:10AC9000AF0DDFF7B86C89DF7B70EF4FFE0671CF29
-:10ACA0003D04F3372F5A19DF2F68FB4CA301F9D766
-:10ACB00087E14B8125A00179D25D1DEB81FCFCBAB7
-:10ACC0009566CCEB1C921BFC83B190A2FA2FEFB9D6
-:10ACD000C748F7ED8F7098314C9E76838D43EBD942
-:10ACE000D9F720BF9FB23FC6A7F90EEBC9A63A1409
-:10ACF000EA1B658CBE1701DE70B902BEF3BA9F92E3
-:10AD00001E3903FC00D60FF5D9BFBCEFDDFB41FFB8
-:10AD10003EC2E81B32E5D476FBFC30BB9D3CCAE862
-:10AD2000D248FF813EB7EA40B31EECB96BD3772B14
-:10AD3000E6CD7C53BA1E99CD7FB7A3773A3E3A85CC
-:10AD4000EE4BDD1E76CFC4A58E0178AEB537F95D2A
-:10AD5000B75D83F427EA5D1DF224C057F539710110
-:10AD60004F62C953DCE7B46ECCDF67809C5CB75799
-:10AD7000CB923D7A1B678B86D8C3C679FE354335A7
-:10AD8000FB5D4B36FF6E219FF7FE35A174302B37EC
-:10AD9000469173542EEB92402E57B2DF5D38BE378A
-:10ADA000A50CE07F5C223E3B9EBB6279C63359779F
-:10ADB000F0DC84F788A40ED286DF7728ECC8D97B34
-:10ADC000670F003DF20F6D4B8E3B813D64F7C3F181
-:10ADD000E6100FEABDC7ADAE4CF0374CE7F1FEE32D
-:10ADE000D66027F0E3E363622588DFD3FE3791B0B6
-:10ADF0007BFB8EEB5C99EC3E0891577CFD77BABFEC
-:10AE0000AD42BEA3740AC4AB17100BD89137CB4C1C
-:10AE1000AF25AF33BA14FCAE4EF227C03CE764CF87
-:10AE2000F8EF6C3AEF940D3F47BBB2076E5AFEBB8A
-:10AE30004FDF50AFEDB15F7749EC9E1207D3F76B50
-:10AE4000475F78600E9C73A376B644E7B3A47D1F7A
-:10AE5000DEC7A3B6AB7BEC9BFFA57F34D23E726D01
-:10AE600087F509BFB7DA4EEAD1CB857EF714CB73ED
-:10AE70007F63CC435DAB69BDE1A95884E3F9C70D9D
-:10AE80001EE0DFE7771AD0DE399F103CB91EEA2FAB
-:10AE9000E43B3C385A1E9EEF12F8BD4263FF00E4CB
-:10AEA0000EF9BD0EEFDDF8EC3103FECEC7CA27AEBA
-:10AEB000DB09F6D36799F6679F03FFDEB336BC0F55
-:10AEC00080A4B2EFA7717A04FAB2D3FD907F6546F1
-:10AED000BD61E58B69C8BFC4FE9D7B2C06CFC19FB9
-:10AEE0003F3C331EFC609D9ADDEC7729659307F8A3
-:10AEF000F0EA9D31A8F711BDFB15587FF9AFA6CD3B
-:10AF0000190AE3BF6F23B09EEE8E17D1FF18DADF68
-:10AF1000E872FD52473FC6077AE42CCB9B5D1CBA12
-:10AF2000AFD907FDAF21E23E4496375B244BEC7767
-:10AF30002AB7453F07FE5E36B3D76A84BF2491180F
-:10AF400053810EDD84DDFFB86D20DEB77B3E3B41D3
-:10AF5000D0313FEF28F0ED64EDABE82F31B07CBD90
-:10AF60005EEEB73C95CDCE055719BF54F84D6A3704
-:10AF70005C56D607B3DF6D2E6AB20F5D4BCBF51C66
-:10AF8000CE9A5457209B7EBFAAF5DE97DF46B83C89
-:10AF9000FAA33FC2B8874DE8A7216F33F8A9ED9710
-:10AFA0002A6390C71D5A147AEFD91D1F60FEC8D9B5
-:10AFB000976EC0DF2B5B22FBCFC23D595D66FFC79A
-:10AFC000B7D3F285C347715FD4F38D88C34B8CAF81
-:10AFD000D4C03A8642FE8AEB6FD948B78CDE4F6FF9
-:10AFE000CD47F8093F6DF7F9E8F69598A7E85FCCEB
-:10AFF0004FF42FDED3DA997EFF7F0189AF015A002B
-:10B00000800000001F8B080000000000000BAD58FE
-:10B01000096C14E7157EFFCCEEEC18AFD7EB031FDD
-:10B02000F1C1EC1A8C898D3DF8AAB1A12C36A60489
-:10B03000A17639225CCA3169C25188E3950D154A5F
-:10B040009118675B2E11C555AB88B469BBA1224529
-:10B050002D515C07901B61BA0435E0364D17052968
-:10B0600034B5E8D46DA8D5D8D8A569232424F7BD74
-:10B070007F66588F316D137557F6F3FB8FF7BFF767
-:10B08000BDEBFF3D26252A332B007E56A400D401BC
-:10B090004CD26719C0982F5199E1A5713F1F1FCB62
-:10B0A000441ED701E800B301DAE8CF6AA432B8B38E
-:10B0B000B391B631350A7C5C874C4EE31ACE3F9D86
-:10B0C000F726B86A683184E51C80C7C1FA6467B99D
-:10B0D000A01E6003FD8D473FDEF09BBBCC07B0098F
-:10B0E0007ADD50027043E8DE278900A3BDDF716B73
-:10B0F0005E5AB4C27FAB0C80E91F0893E5493DA7B7
-:10B10000530017D03AFA4C8A497DF566288BA09CEB
-:10B1100031BF5717AA00E629CC754BC6E92228A2F1
-:10B120007538AFC66B91F679D428EAB34F082F5023
-:10B13000D0EEA7A5782588C97DFB048D8F8FB277C7
-:10B140007640908E8B5786D300C6332460E94867DB
-:10B15000AB8910E2A1FF13D4532867DC0D6D7D7815
-:10B160006E6D8B10E9E376B8860DD44F00C6F5AB53
-:10B170002DC771C475298DCB96DE011CAF72AE4F01
-:10B18000DAE3E42F2902B7AF364B88F4563C88C780
-:10B19000269A477DA310170957FC6C9011F7260BD0
-:10B1A00077809008E897672CFE19D91B172B516FF1
-:10B1B0009FAC8B684FD305F40BF24DAEF825A22C53
-:10B1C00004B01FFD0BFDEED1FB7A100E79E52E9237
-:10B1D000D368B997A1ACCDB8EE108B009D2B430F6F
-:10B1E000A7C75882EBF17998E034047E1751849F09
-:10B1F000D31510E6742544385D053D9CAE865E4E41
-:10B20000D740825378341E85009D74C07F2B15C9AA
-:10B21000633B8549A4B51B21D2EB7D108703164EF5
-:10B220000FC74167148F9F168795A0E57179D3F1F9
-:10B23000282CE3F13D1D0F0FC523FA2D056279443B
-:10B24000978221125D46818B729683E222BE05426F
-:10B250009C6FFD1F71683034975631031E2D33C724
-:10B26000C5B72C3C66118675493FF52B661DB0FDB0
-:10B2700005A86778E1837EB4C76B539BFFA1608903
-:10B280008829ABC2AEC5C8D734779520FFF3D8461E
-:10B29000936F6A7E2388FC1BCA97C3AE7C8AEBE659
-:10B2A0001AB70AD0CD36855720AFA5F82AA18A0A49
-:10B2B00047A940F1B3D76FE2AF75EF53FD98475AF6
-:10B2C000915725FB640F6286F889252234202D5E74
-:10B2D000157FCB8DEB5648DAF7291FDBE5B84F41D8
-:10B2E000DCF776B7E602DA7B5832D77B709F5C9D3D
-:10B2F000B40BC7F514E4FBFACABB58F0E1E7A3DCD2
-:10B30000D32457EB9EA703E9718EA9A6279B73DB75
-:10B31000B04E8C26DC704C499E7332577B4D413CBD
-:10B32000412E05F27B816CCA19ED2B2F27BFF42B20
-:10B33000661D85EC400DE136911BEEA7F5E36966CD
-:10B340007CF5530CCE7E383594D0796586F1F10FBB
-:10B350005101DC3FA8681768BE23F55E29D5A5DB3F
-:10B360008BDE3B64049271CAF0FCCD687734043103
-:10B3700089D79125FE5B5847017D3089FE1CDF8E01
-:10B38000721087DAB01675E3F0E7364FD463912276
-:10B39000B957B85CC9285E84FBBEBBFEA664C6591B
-:10B3A000A11967561D1AB838F88D02930DC394BCC5
-:10B3B000EAB878F75F7F40FC3AEE78555A9ECCA702
-:10B3C00097BAC0478BBC8EBA61E75963BF272EFA84
-:10B3D000885FB09DD62D7D6FA884EC5A366444D327
-:10B3E00048CEC0FB05A61E565F087DC23E4B5F6877
-:10B3F00015A93803749E13631EC4AB93452EA71181
-:10B40000FF1A5375D4FFAF32C6473AAD0F79F3D167
-:10B41000AE5D965DED83A70EA521DDF5F2936BA0E1
-:10B4200092D2C1CDEBB7825FCAFF3DA7DDC97ACE0C
-:10B430007FA323D0CE0EB03F7189E2A0BDD7B9AEB5
-:10B44000038EFF9DEA4EC7D43A8F7A7DA2A465731E
-:10B450007F59FD0AA885A0BC9DD65EB2C34B7A0F6A
-:10B4600048310F43FA832ED54FBC953F70E3391E08
-:10B4700097F67A78398BFBDECEA7AF1D41DDB3920C
-:10B480007855BDEA0911EE55AFE686C8BE2A09B661
-:10B490008539DE311EC755181B0CE3E9F58C89A0F0
-:10B4A00080E7BC3E50A6620585370F86E0CF7393D8
-:10B4B000FA755AF9D42A9E6991300EEE3C057E4CFD
-:10B4C00049E81CFC715446BEF328D00AB843BF506B
-:10B4D000CE9D112146721A076BF2C8DF67ADFCF4EE
-:10B4E000E409A04CC1294599054A5992B7F1F5588C
-:10B4F000FE492DCB74CCA7A98F38F6A737049DFB46
-:10B50000F550A2A29EEAB1B93F23F4A863FD61DF22
-:10B51000CAAB14974B133BD6102E59ABAA1DF3F5AB
-:10B5200020F3FB435DA1578DE17EF8D8ECE70DF8E1
-:10B53000E5FD002222D9D764007C0FFDD138EA72E4
-:10B54000F83DC5C078C47529D7A7F81D7F3C8A93FC
-:10B550006F08601C50221542E1D43848E2ECBD8FE0
-:10B56000238F83415C4438A74931BC723C80533DF2
-:10B57000CC4DA7F9BAAB22C438EE5D6A1CC7678709
-:10B580009D78E7B639F1CED79CF816EC72E25B14E1
-:10B5900071E23B67BF13CF80EEC4AFE448A363FD05
-:10B5A000BC9E66073FFFC46AC7FA05B1750EBEFCB4
-:10B5B000F426C7FA85BD5F75CC57F5EF76CCDB7105
-:10B5C00035DDEF8BE29D8E75D3FD5E73F559875C9B
-:10B5D000DBCF3A7EFF9F7EDE37CDCFDDA81BD5AB1C
-:10B5E000777D23C7290DBF986AD6A5567149224495
-:10B5F000FE5EE256C9A7BF53B25AD228DFAD3E1451
-:10B60000B6FA101C3864F2569CA809F532D5D1EA76
-:10B610001BE1161FF2B546E43295E3FA919E96744B
-:10B62000858789E2C73861162E5F6A60E072E40B95
-:10B63000F23949DCD6EBDD623A2E6EBA178BF27224
-:10B64000494185E7ADB3E6598359D7D78652C0350E
-:10B65000058FA5D63850D346794BCC29586FBD07F6
-:10B66000F05E0E12DDCB0539160DCC749F544F8859
-:10B67000FC9EA4F17BD315A6B9896E9013C5D4BFE7
-:10B680007E92A3FD2880F5EAB6A02AFC9EC58C28F0
-:10B6900019354E8651D3D1AF87435EBABFE3DF8FF2
-:10B6A00060DD7DEE5A58AFE0EAFB0DD45FB3F439AC
-:10B6B00013D04E0710FF61E63F54837BDF6DFCA87B
-:10B6C00098FA8F474424B00E66F9423FA579FDF001
-:10B6D000920C5EA773D13EACA386A0F0FB83FE2C38
-:10B6E000E3EF818F48D8E229797AC4CDFB0E58EF79
-:10B6F000A32D165EF6FB68B375FE308AD885757A81
-:10B700004BFF158ECB9EBC517065F178E3F7A427F3
-:10B710000BBDD5C7C8A6508DBA6E218DDBEFA50233
-:10B72000F1D3F4C556B122DD98E1BE68D33D79234B
-:10B73000FC3D777FFF19B38F3C5CBECEE33669B723
-:10B74000297FF8682AEF2FC3478B9A8926E5DFE621
-:10B75000F2B744AE39E264DBFEDF3BE2EF09FD4FB6
-:10B760008E79237BC25D80F61BE7F3577E05F11BC4
-:10B770003BE7A9A77723FAED8FE4175BBEF1FCFC4A
-:10B780001574DE7FB7F36F1CDFA1830970CD4DDA2E
-:10B7900079F3E00DCE1B070D4EA7DB69BF336D2A91
-:10B7A000BD05652EF4CF049BA59E0C3C78CECEA0A3
-:10B7B000F93E1B5A9ED34C7D76A8487299B4D4E4C6
-:10B7C000F31B64935FB98AE8B8DB7B84DE99430C92
-:10B7D000420CE361330BFFF009B4BB3B47BB477638
-:10B7E00076EC9EA874613E7454195B19FA333F439A
-:10B7F0009BA47186D7BBFC4CAE6729DD3B4604BDDC
-:10B8000092612D587CB2702DDDD34766E9B7A9133C
-:10B810002F0AE6ADA57BFA8864E6C7F293C25A1DEB
-:10B82000ED58ECD7528228E74326C6793CFF82C503
-:10B830004EF17833A475693C9FDAE8DD45EF5D7A17
-:10B840006F8CA798D41F64DCBE0CA2B393B49C6A1F
-:10B85000258E2FB768AB78BC94D1FDE08407281FF4
-:10B86000F09C9040E70C7862A790CF41DDE99EF212
-:10B870002BC9BCCF57FFD213A7BAB143FE98FB69BF
-:10B880006E30C0E5649760E5C27DD92F786251D2F1
-:10B89000CF4814AF45FD7ADC787FA1F7F4759CC7DB
-:10B8A000BC1B7B7EFEC96353FC313768BE87E02931
-:10B8B00000733EF7159A6F1F1CBE4975E4B701ADC2
-:10B8C0008CEC1F16947AAA23EDBE4B12D59FC6A00E
-:10B8D000C2F7A1BEDC7EAC07DF641C67D9FF178C02
-:10B8E000D76D586CD2E9FD26682AED6F970D89E473
-:10B8F0006144F0FBDFC3EC1FDB9E78B102E9ED345D
-:10B90000B598CEB1CF453D1A498E6DB7AD4752CEF1
-:10B910007F8EEB1DF284237F6FBD74B894F264C8F0
-:10B920006DDEEF10678DECA816D9B675C87FC1C261
-:10B93000C55EBFD5F2A790177E2C887477E4DBE74D
-:10B94000DF5192F3E3ACE7EB1F90DF06BDBCDE4DA9
-:10B950003FDFDE3FDDDEF68B831C17B4772BD93952
-:10B96000C5DE8D748E6DEFD8C0FB2F56289FDDCEBF
-:10B97000F1A2844472C75FB95BACE0FEF60B576E70
-:10B98000501CB55BEF7D38EB7CC77B66E17B317388
-:10B990004A5DA75A37874FB3A9F7288FBDBFD0E5B7
-:10B9A000DC8F176601CF3B6BBD23FA297F67786F69
-:10B9B0009E4D08BC659ECDC37B1AF503ECBF54FFBA
-:10B9C000EDFEBBF79AC0E3726F00F83CE94579C021
-:10B9D0008CB7793FB0FF9F1065D8E7301E3A25ED50
-:10B9E00020C509685DBC3F8873BC2AC573DFAF57AB
-:10B9F0005BEF26B3DFD459FDA58EE490FE15E9BCBC
-:10BA0000EFD45AE7D6CB789F0952E9D6ADFF9B58C1
-:10BA1000FF5F38FA367F6FFD1B3AD0569240140014
-:10BA200000000000000000001F8B08000000000064
-:10BA3000000BFB51CFC0F0038AEFCA3330C42B3167
-:10BA400030742B33307C03E20E79841CADB02A07AE
-:10BA500065FA5F303230BC02E23740FC8E9174FDF3
-:10BA60006AC208F6525E06067520BF02482B0A30ED
-:10BA700030B001D91A40BC0BC8BF05C4CF80D84133
-:10BA80008881819D8F81C110888580581328EF0996
-:10BA9000A43FF161375F4B18BFFD8F0550F9A282BB
-:10BAA000A8FC3FFCF8F5B709E2971717223D4CDEDA
-:10BAB000AB911F1FC6EAB44F33D4C4371950F91FD6
-:10BAC00065181898E51818DCE421FC6B48F2114061
-:10BAD000B14F3210F66D3160DC01D55D66C06EEE9F
-:10BAE0001DA0FC13A07C0AD41C0004EB50106803BA
-:10BAF00000000000000000001F8B08000000000094
-:10BB0000000BE57D09785445B670DDBEF7F696DE8C
-:10BB10004216C2163A2C0A08D86C21084A67C3A0FC
-:10BB2000019A454407B5598410C822E27C3CC77984
-:10BB3000345B061DE64D147518079C06C380F35050
-:10BB400003460D1A980682A3CF2DB8208E336F9A24
-:10BB50007D3190002EAD83E3AB73AA2A7D6FA79B46
-:10BB6000E08CFFFBE7FBFF2016756B3F75B63AE7ED
-:10BB70005445359808194BC877F043D32512212432
-:10BB80002D9AD29FBF7F974EC82433FD974C48A172
-:10BB90006C23643821136D2468A275268EA11F536F
-:10BBA0000979B7460ACAD086D60B6413524AD8CF51
-:10BBB0002485D44BD7137231E7C5AA216E4224AF36
-:10BBC000972C1D4A53B78BCC8474CCDEAF2507214C
-:10BBD000CE1C0321FD589BEFE8DF64AF15FB12F983
-:10BBE00094A24EBA7C9AAFABAE7EE719BD74E55D08
-:10BBF000FC0374E5DD4A86EAF23D2A6FD0D5EFB941
-:10BC0000344F97CF0ADCA2ABDF7BCD145DBE6FF55E
-:10BC10009DBAFAD7AE9FAD2BEF1F2CD5955FB76DB0
-:10BC2000B12E3FA8F6415DFDEBEB57E8CA87841EB5
-:10BC3000D1950F7BE3315D7E44D353BAFA230F6F66
-:10BC4000D6958F0AFF5E573EFAF44E5DFEC6D65774
-:10BC500075F5C746F6E9F2B9E42D5DFD7CF307BA48
-:10BC60007CA1EB535DFD9B338EE9CAC7BB3FD395E7
-:10BC70000B3CB8B5DF25DDF7099EBFE9DA29C447DB
-:10BC8000814D889154626A26D5985A492DA636D29C
-:10BC900084E9864CFF9D64046DF074A08A50BC5BFF
-:10BCA0001968FDEF149ABE9BD3DBE91F08BD790923
-:10BCB000A1783B91754D269A6D2199E299C94C0264
-:10BCC000168A0A8E08C5B7148A771182A92B42F109
-:10BCD0006D18C5BB8819D34E914EF83D25E2C2348C
-:10BCE00035D215BFA74532304D8FF4C2B473C48D21
-:10BCF00069466400A65D22FD30ED1A198AEDBA4549
-:10BD00003C98768FDC80DF7B447230CD8CE4E1F7A9
-:10BD10009E112FA6EEC82D9866458A30ED159982A2
-:10BD2000F57A477C98F689DC89DFFB4666607A4DB8
-:10BD30006436A6D746FC98F68B9462DA3F5282E9C5
-:10BD400080C8626C775DA412D3819107F1FBA0C813
-:10BD5000524C074756607A7D2480A927F208D61BEB
-:10BD6000125983E9D0C863F87D58A41AD3E191A78A
-:10BD7000F0FB88C87A4CB3239B311D1909629A13D2
-:10BD8000F93DA6A322DB30BD21B213DB8D8ED46238
-:10BD90003A26F22A7EBF31528FE94D806F29807793
-:10BDA000214CBD91FFC2EFB9913730CD8BBC8FDFF5
-:10BDB000F3234D981644FE84DF0B2387311D17397A
-:10BDC0008AE9CD9130A64591B3988E8F9CC6F496A2
-:10BDD000C8456C776BA415D3E2C837F87D4224823E
-:10BDE000A9E07724476D0E0BFCEB05FF9FE93A793C
-:10BDF0001DE54BC46FF88EA6C446F16054B47E6C4A
-:10BE00004AB91DF24995E25512C5EF64CA0B811F6C
-:10BE10004EAC9482376751FC480D37425ECD31B944
-:10BE20004D347F176955017FFF42C276E0A77B47FB
-:10BE30009DEA1EA6F8FA6E5AA807456EF8417EAB39
-:10BE4000C29C7A03BF6D56C2F4FBC4D47D697E1BCD
-:10BE5000B4A7B43114D09B8E0FF84DD111FAB94B61
-:10BE60002101079DEA41E86114D60B99687E66318D
-:10BE7000F10EA5F5AB46996604E93855437D253E9C
-:10BE80009AFE22CB3703D2FF02E2A1F3DFCFD383A6
-:10BE9000C480E98B9914EF297DCDBCAF2FA3A702F5
-:10BEA0000AC42E1DC36174BA8BC90D5B6BA66FD01B
-:10BEB000D5B753081B4FD47F96F83E82EF813CD212
-:10BEC000AFD216AD47BF1F867A71BE7F1AEF7BBD1A
-:10BED0008132020AFF402763700BC827E2764E8644
-:10BEE0007999DDCE29F6C4F3FAD932D740A58F76F9
-:10BEF0009E419CDFCF2432A396F1978C2983B07F9B
-:10BF0000948701AB05FB9739FC45BBCF019EB4DD9F
-:10BF1000FB165F0B93A7EEEE08179BEBAAE042DB44
-:10BF20007D897051683BFBD5B74B9C56333813AFB6
-:10BF30001BE7C1BF57984840A2EB68DD620F6ECE89
-:10BF4000021C7623FF2C7171069A4A8141E57A49D9
-:10BF5000322C8190C63D492103AD9FB7C5BE19F46F
-:10BF60008096BCC0933E80F366956CA15556ECF963
-:10BF7000F9A1DFD07CDE2695500D832C487A229BD8
-:10BF800050B85D2B496CFC80776F1FDABF9F881F0C
-:10BF9000AF04FDCF27ACFF1689D151608B13E17A36
-:10BFA000BAA0A66A344DC3BBCB8A09E5E3A72858DB
-:10BFB000BB50FC5E60250AA494831B113E01F578FA
-:10BFC00058C817A467259A97DBE7E7435ED03F5D23
-:10BFD000F782A01ACDD3BF0BB7E9F31A78E1BEB749
-:10BFE0005AD4E066C4AB6E0C3E025EDE6E0C7E1C64
-:10BFF0005E0516356048457805810F382537C2A1A2
-:10C00000C4A28664DA4F0985239060C9EE87D30104
-:10C010004E0BB7595CC735E396D526EBF215F55DA7
-:10C020005CC73572F4E21BCF38804E1767185CC7C7
-:10C03000297F6B5EE64D394EB7ECFCB2224C057E93
-:10C0400094D566B96CBA7EF4F98BD55211C36FB72B
-:10C0500073DAA0C478B638C3E83A4E49F5EC362610
-:10C060006FCF2E33BB609CE6652E171B3703530141
-:10C07000AF454BAD585FCC2F51BF3FF4FC08A9230F
-:10C08000C7CCC0CF6959EFC4F513D293F2B911E907
-:10C09000A441FD12F0C64CFF7E67403CC2BCE8B72D
-:10C0A000A2560E98AE87EFDB75E3D176EE931AF9C0
-:10C0B00092986E1572528397F7430748A766DC671C
-:10C0C0003FEDD149FB6B516C6B408F9AC0F1A702D9
-:10C0D000EA517E50660E1BFDF4D3B93AB61F89C6ED
-:10C0E00039BB6C5B37E06B25E66A2330AB92DAFE36
-:10C0F00005404FE7EA56A6837C59285FFCB12F4ED6
-:10C10000FB5F08BA0DAAAD7A7919E4F3A4FDEAE859
-:10C110008CD8DAD64DF3CD063A94AD7DBFBF929858
-:10C12000DC29DF7E70DC683AFFF2FA0B4698C70420
-:10C13000C9FF2B292DBA7E09D64FFB29DD76C4080D
-:10C14000EB3BAD06AEF949D615E0D96E9EB68C93A1
-:10C15000499AF905A82249E975760EA757E2BEFD6E
-:10C16000534A9F67DE52C923741EE432AD45CB3378
-:10C1700079E95CE27300BC66D72D44FE7306F80FC4
-:10C18000C861529D0DF8718E188A607DE7C8FB8EDC
-:10C19000611AF8ED938C1C3E5495A5FCC084432194
-:10C1A000DCBA00BF32955435C983E1BB12E07C494B
-:10C1B000FA0EF94950427E56C2BE07887939AE63FD
-:10C1C0000DE34701FA07F2F756EBF9D3FCF5FAFC59
-:10C1D0003C32255DA1FC65DEE32AED91F2372DFFAF
-:10C1E000A3F07B566272773EA9AC72D1F96F34D25C
-:10C1F0007DA2F39FED224A37BABEB2573666CFA270
-:10C20000F9372526C7CE2EA3D3BF86F6D389ADBF77
-:10C210007469D0E81DD87E7DC7EA864D1F4DB03FBA
-:10C22000261F4B85FC256E251BB925557213AFBF04
-:10C230005B9DECB538A01EFDAEE1CF73D6E8D7D735
-:10C24000D1FA63D74BC863886FA5DB2613C033B11F
-:10C250001EB15F623DEA36C91B8C4307618EAF8217
-:10C26000AFB572F809BDE38B98FC3731F9EF62F294
-:10C2700002BF554EDF14EFBF9046003DB78E637886
-:10C280001236B2F30CAB678CD6FBE64AF54C9C5EDB
-:10C2900068BDEFAE54CF12ED4F31A4B5AF57F6CA1B
-:10C2A000732F07287E97BEF08483507C3CA354A74D
-:10C2B0007BE8F7455B563B004EA7958003F0E64CC4
-:10C2C000502E8A07AF510649E81B3689EE7BB9C06C
-:10C2D000FF31CB27827CFF728BEA7A84EE4BC53626
-:10C2E00053C844F7BBBC6E4131198CF9232CFFB302
-:10C2F0000B801F15F5EA51EDBE966E7D22DD6DC7F0
-:10C300007DE866001D9884BA119A96D79C18077A22
-:10C31000740569457C8E6D07E3C3D18EF2EB5946F7
-:10C3200067FB72716EAC609F4845DDCF2FC0B9B11D
-:10C33000822847B5785402B84CF5BC01067B2A9C8C
-:10C3400017C8483212F88A800309A6215F5EF9EC0B
-:10C35000AF061FA1F368AE79CB2169E04335248491
-:10C36000CBC5DA397F4DB9825C384FF1935CA36D50
-:10C3700017C476EE7A3A81CE34DBC0D2456AC83132
-:10C380009AC273D126D54331932C7AEE99DF3D457D
-:10C39000E98E7C62F2F4A5F05EF8DC814337D0FCD4
-:10C3A000C21D6A6A315B864D4A8FEE4705FD0B76EA
-:10C3B0001901FFD2170F18DD83D8F7873A45F761C7
-:10C3C000E18EBD4632A83DDCF26BF71AC3B638FBEE
-:10C3D000517B641CE8332B9FFDCA08FB7D668F44AC
-:10C3E0003A67B56F5FB2E900EA2F0027DC3FBE3F36
-:10C3F0006DFBD56E9F42135F1D8EF55CC0AF13EDD4
-:10C40000931D64F508C4E3E75FA5E397FCC9E481E5
-:10C41000F5973C7FBF03D6714AA964F8BC7175BA21
-:10C42000978E5BA206D25D98B2EF254F3F8078369B
-:10C43000FFE003A89751FCE862409911E802EBBBCA
-:10C4400077C36DB8BE79C48FF856B251F605810F27
-:10C4500028A468471C7A7881D3C3A9CD9453D2F518
-:10C460009D02FE087AEEFB32E78FF7A11EF9005F0E
-:10C470002BD56430FF8599ED5395C120EC72661D74
-:10C480009ED6FC0CF9E8D91EDECEAE810807C13776
-:10C49000919FCA070B3BB3FD61FC17DB51BCCB87F7
-:10C4A000EF50BF49F55A06EBDA717EC9C65FC2C7C5
-:10C4B000A7F3B682FE712A9DC989D8F5FDC920F877
-:10C4C0002395AF1AFCD2D035A3F39A87195D0B3AA6
-:10C4D0000F4E2E82F2CF3F64F403ED40FED07985FB
-:10C4E0003A63F9DE6912F2011309C5A3E71A95D37D
-:10C4F000B3BE9C7268D4DFE8BC15C9A9C513DA7F46
-:10C5000027843FEA25F31EA7ED34FA74058C87F5DE
-:10C510008CD1EF5951BA9DCFE9FFF740FF4951FA4D
-:10C52000271BD2AEEA7CB6480DFEEE29A0574A9FE3
-:10C530000137D0ABEA83757FB67DFFA13B295E7FD3
-:10C54000562BE854CF3763E9B464E70304F033961D
-:10C550004E3FEB5E49E2D229FD1E974EBB87FF5747
-:10C56000F8A680DBC118B8513EF8DB57DD89E1172A
-:10C57000CB072B0CEEB87C90FE7C48B2DBE39DC071
-:10C58000378167A5FF59D613F84D1B3E0A7C6BC354
-:10C5900047816FB1EBD4C32DB67C03F01B8D7EA019
-:10C5A000AE20013BDDE7D6DD329E135BDCAD8E4E67
-:10C5B00074DCD516720FE8D92D2E9E4F66F9D6344D
-:10C5C0006315F005F1BDD54266007EB6F85A1DC967
-:10C5D0001AFDF94883EC70D3F2709014C5D3AB29DF
-:10C5E000C7C5F1C32451F972845FA16CCB5C3A1CBE
-:10C5F000CE55B20774B7B9CB6F7780C9A2A5A1F7A2
-:10C60000A419F4FBBD6FCA68D368B13A06C3BCE88D
-:10C61000B95DE942E13B87EFF3691278720C5DD7AF
-:10C620009C06A617CF5DAB87C73CDB1223F019AA87
-:10C630007F46F140832FC24F50B2415F5E4AD6E23F
-:10C640007E95C6E08F9F9F77BAC81C7F869021FC9D
-:10C65000BC6180FE16733E55280F9C3483C2BDE535
-:10C660000D999868FE62834CAA609DDBA520013A73
-:10C670000EA4211E9653FE4034E7C266C0336362A7
-:10C68000FA6D7EE92FD93FA15516BDFCE9E0DFD058
-:10C69000B4F9E54FAE790DF2AF7C9CF929695F3FA3
-:10C6A0007FCFD777037F6FD963226827D9F3C7CCB1
-:10C6B0009F40FE559307ED1C2B4C5ED48FF7D8831B
-:10C6C0007DA1BC07B32FADDCFDD5E030CA9B55B8CA
-:10C6D0004F05323B475C6CF8DB7F4BA990D255810C
-:10C6E0001CDD9384FA75C5AB96201C3A5B767F956A
-:10C6F000EDB7FD70EB2937123FE29F9DCCD809F8CA
-:10C700009ACCEC6915AF8D7A66391DBFAC6EAF71EE
-:10C710000E2DCFFFC3B78381AFB4EC64FAC1793576
-:10C72000FC34F11032497E62B94AF7EB3CE86A5DAD
-:10C73000295F920FE5066CF1E0C2E0D042E100EB28
-:10C74000A27029017E98081EF3FE65E171E16E1862
-:10C750007F51C348226769E12279D9777BD02CE1E8
-:10C76000FAD9F73D5F0D06BEFB59ED7294DF1DADA2
-:10C770007B35AC3BEDFFA5754BA1AB5977CDBFEC3D
-:10C78000BA19FE0F90993C8AA583F678FECA8F31BC
-:10C79000FFBCDD83F3BD4AFA6FFC975DFF3FB8EF46
-:10C7A0003B25F4C775B4EFC7FE65D7DDD1BEBFC961
-:10C7B000F7DDEE027B6FCBEE6F338966FD1DADDBDF
-:10C7C000A0FCABF2B72BAF5BE83D4D864AD7703A81
-:10C7D000BF4F48F56D59347DCF7B29158EA3940644
-:10C7E0007CF1CE0D4315766E30819D092ADE260937
-:10C7F0007B5193CE8FDBBD04F58C89DE5FA07E403C
-:10C8000094CAA65C5ABF296F8EE711AC31F4B01FF1
-:10C81000F2D36EE479FD79EA5D897825AAC74ECC1A
-:10C82000BBF50DD0EF267965D4FF688A7ADF47998A
-:10C83000E3D8F71CFD39E28E9873C0ED33F4E5B709
-:10C84000F1FEA693C5AEE1145ED3BB2BAE2005D19D
-:10C850001DB9952AACE78EBB2452ADB157DE16D375
-:10C860009F4321DC4EF28FC16F6E1BFC16233C48A8
-:10C87000AEECD942AE027E84C1BB69DA9020D861A9
-:10C8800088E261F09B5EE6413B283F67AABCBD6A37
-:10C890005BD30474AB12FDF9529C1313C199F0736E
-:10C8A00027F6D32B0A77D52BE3B953D31FC243EC1A
-:10C8B000C7F7DD07B17FFFEC7E64C37EC4F19F2D17
-:10C8C000309B6F03FF85B99F84E7F6496B658C83C6
-:10C8D000310F94108EBE1C15FD3B270CBE6C509C76
-:10C8E0008B878D2C7F9075EB01F82CE0709C472A8C
-:10C8F00051EF2497BFFB6E0CF88D1042B4DC4BC88F
-:10C90000047A0E9937460A59E9FAE72B24E01C0A03
-:10C91000764D891CD5DA3583FA3CFCDC941EEDA7F4
-:10C92000A3FA89F8C30F9DFE95F2A3A37DE87905CC
-:10C9300052058757B4E7C47B1A181C2B1649C15EF1
-:10C94000884721D5A7F1EB7CC2F1FAAF0F0D433E2A
-:10C9500097FBCB414E3CBF7A07A0BE5FC1F5FD8B74
-:10C9600001B713EC35171B7A3BC11E73F18D7C8721
-:10C97000962F8AF4203F477EB0CC8C694B81542D92
-:10C98000C3798BB44E44395C6021C07762DBED52D1
-:10C9900084DDA592F919E98F9C0DFBC87EE6D3A62C
-:10C9A000CE4E9A7D5B3BE18C32B8FD3EC0CF518DBF
-:10C9B0009FE49F852F9C5B01AE072DE171BE38EB94
-:10C9C0007D8BC3AF78DFD746B0134C69C852012EB8
-:10C9D000530A645DDCCD7E859FA786916130AFE20E
-:10C9E0007DE31DA3605FDE903D160ADF8A860B465D
-:10C9F0007F1C7F5B2C3CA17FB00B1F533DF3009E3F
-:10CA0000C77E6121014A0FEF70FF0F2DF202FFA2D6
-:10CA10005D79C13EF6A1C2FC0AFD5566179F5A9C7E
-:10CA2000ABA6D17107D6B9868088E9CAEBF757DD86
-:10CA300058DE8DB713F5BA2E62F58E185DE5F1D686
-:10CA40003FC1C8D63F9F787E9C23FDEBED5BEE2F68
-:10CA5000EDA13C90EF0512F291F6784D903E2E1626
-:10CA6000494190BF708EC57CB184F2FF1D032B0F2E
-:10CA70004C61F252E07D2C9C2595C1598C9FA532CA
-:10CA80007C36AA0C3E02CE02BEB1F315F529BF1AC0
-:10CA9000ABB5AF4CAA1FF23CE827E50D920B4C7FDB
-:10CAA000E54AD808745851FFA80AFE823BDCAC5F07
-:10CAB000A2F8066BFDB5FD5505E7B37FE868D41F06
-:10CAC0002FAD65FAB177EE0507E841EF183CEF8D21
-:10CAD000067A7C57C678824470FC74D9B669058A98
-:10CAE000B6DF2C9CE7D445B92A98837EB468AFDAC8
-:10CAF00059834FFDD54E582EBE775DE41E0ADFE9FF
-:10CB000078388FC07F98C816DAC5C0DAA6BC245A18
-:10CB1000FEA3CA64868725B57B8D98CFC2FA623C96
-:10CB2000314E2C3D4D2B4ED2E5E7E487BB035C8AAA
-:10CB30004DA1259E3878DAA80A3FC9F794135E8A7A
-:10CB4000B783FF7F901317C679E3C06D9DDA4E3E21
-:10CB5000748E271F162F777706F82FDEDDBB331074
-:10CB6000C7E2370BD3E3C9878F96317FE0C7949F25
-:10CB700041DA328DCA87EB35F2619A05F123B6DDD1
-:10CB80004FD5AB940F62BFFE97F9CC47201FE2D080
-:10CB900075B5AA970FD31B66A17C983E4D266E8D66
-:10CBA0003DEE672AF77325940FB9E977605EF524A7
-:10CBB000C5C19B8FF8B904E00A298C0372E20F9C6F
-:10CBC000EFC7CA8B44FC7C8A51E2FEEA0EF8F9FFFB
-:10CBD00025380B7EBE989E5F400F6C8F8704F9F559
-:10CBE000E23B283F97001F193F5F7C17B74BC6F009
-:10CBF000571FF0D7E15AFECADA97FB993CA8A8CF95
-:10CC0000FAD54C5A7E67B5EA31D3FA7746F96DB654
-:10CC100096DFFE81F35B0AE74C579CFD9D3133891B
-:10CC2000B8F5FCAA0FF0A96343FE38F045C0FB77C6
-:10CC300064F4239EE072FCED217F1C0EF6F354A3F6
-:10CC400082F87382F3AFF3CB82D30A281DE7CF6556
-:10CC5000FA70D97619E1505EC7F4BCF23ED6A09BBB
-:10CC6000E6C70DFD1AFD810B77337F20055471AEA9
-:10CC7000661F17BE13AEEA06E59B24F467CEF32CBD
-:10CC8000443B3E59CFECC466FA87C57578D18E5CBB
-:10CC9000C6E1B5A06113DA9B1704F576E8B23EB79A
-:10CCA0009C81F380E0BF0BB7C5947B1E467F45197E
-:10CCB000D89B35E71099EB0FF7CAA1812F426CE79B
-:10CCC0007BEC5C15BBFFA25EDBFA4BFEC9F51FA433
-:10CCD000EB1FFEC3AFFF6AD7AD1A39BD0F25C38165
-:10CCE0003E4E18BC48EF81FFA2EBA7E3CC7DB46FAA
-:10CCF000676D9C510AA7CB770CFEAA2E50AF5CC281
-:10CD00007AF337EC38904EF3336BC91030D3CF5FE2
-:10CD1000AF978B6D72B8CE8D727666E50E69F64070
-:10CD20008037A9043C9B33D4E4077FEA414B2BF2C4
-:10CD30002F8177371A193E8FE6E31EEBDA5A80E728
-:10CD4000887AC9857411B2B0730585BF85E6F78FFF
-:10CD5000FA6A1C8737DA632AEAD9FE54D0FD00BA92
-:10CD60001AD7C0F3DB981EF6232A6FD01FD6B05710
-:10CD7000857625B47E0AF29B013A3F17F8E772D315
-:10CD800035FBB6FB08C3DB2D9287C4D9B77EF44FC1
-:10CD9000DC7DFB81F055C0E34623D7E7F9FE1DB4E7
-:10CDA00034150F433F94E4D90C951B92D18F72BC7C
-:10CDB000BA37EEE3AD1C7F63F11AF47BB7C69E343D
-:10CDC00019260EF19645168C73C3717B31FD47CB46
-:10CDD0004F62CFCD15A409F5980992FF2F8A26AE90
-:10CDE0006D3A8F3F117E5A4DBD5FA957A847325CFF
-:10CDF00006E093F78B784B881F4EC7B825FCD9DF28
-:10CE000023FBE39974BD97D6C81EF0FFDC6E701F3C
-:10CE10001A03F4FB884A002F2FBDAD7A99DE99845E
-:10CE20007C77D63BC7543085CCA23081FD9EF5532C
-:10CE3000C65F8F4167F4DB9FA8DCF282AF9ED48E81
-:10CE400080F8E1699EBD856EBA2FB70D3FB81AFC18
-:10CE50007053F35D870E017C1F9609C0F7E89A7C3A
-:10CE60003C9FDC7F9F84787D98C211DADF362DEB02
-:10CE7000D0213AEE5D6BD2D0AF36D37BA010F06CF0
-:10CE8000CE24BB0DFC6BB7F693895F03C7BB48D3B9
-:10CE90006AE0D7332BEFBB0DE65B42E500D8594B78
-:10CEA0001A0E167686FC06C9E3A6FD5704FCC6CE0C
-:10CEB000740B9BD65F3082BD631EAD07DB53B1811F
-:10CEC000D5ABA8913C16C0C7864791EFCCAB9188F3
-:10CED0000BEA537DCFCCFA0D9A69BF4D1B687B9A44
-:10CEE0009F0FEDA1DF9AE4E9E047AB785B66ED7355
-:10CEF00096BF0E7C691E6D478B4953CD7DD8DF826E
-:10CF00000D12C9A0FD95E464FD470EF4F7B6EA8161
-:10CF1000F28FF7FEDA08F3BE9B8ED785F63F470EF9
-:10CF200017427DF213C9B505ED4D2C4EB685D301E0
-:10CF3000F9B00BA32F89E7B91E28E4E107C65E8884
-:10CF40004FF3962EAF8275850369597004AAA8BF66
-:10CF50006004BDEE3885B39FEA6DC7781CDBFEC068
-:10CF6000316358C3A75A8DBDB1FDDCFA5CA4EF7BD9
-:10CF7000890FFDDDFEE54C0E1F596D094AA07FA803
-:10CF80002E9493FB575FFB24ACFFFC732AFA47CF28
-:10CF9000F708A33DF6D4069504E81C576E90916FF0
-:10CFA0009CDACEEC40F24615F3F31F30627EFF862A
-:10CFB000A9E3801F9EA2F0073CCCDF586884FC7C6C
-:10CFC000CAD74D71F8C73C7729E31731FC61FE7A67
-:10CFD0003DFDB7E3174BC631FE1EC30FCABA57A1BA
-:10CFE0009D2F964F54109BE00F4321DF14EA82F8E7
-:10CFF0005BFEB64A409F2B575C77AF07BC9969012F
-:10D000004F31A58BD001E06B9782923B40CB7F7470
-:10D01000CFAE1100BF93006FA08BB529E84F9D17CD
-:10D020009C857015F184F3D7EBF159C42FDDE1979E
-:10D0300089572B074A92885753EFE39F52BCA4E3CA
-:10D04000DD532F052D12E48FBCFEC070CCBB000F4A
-:10D05000CB977279BAD68E78FBF1BF5D580D78798F
-:10D06000F74312CE9F04FC552057CAD74B6EB063CE
-:10D07000CE7F88B59F4FDB03BE7CFC6B863F148F51
-:10D08000DD80E7E51B1E7D1DEBD7486EE8FFE34D15
-:10D09000B350FE96046482E53547503FA67200E324
-:10D0A00080F607E474C0F3F2552617ECA3C017818D
-:10D0B0007F4754E6B72766CFE0A9B4DD26A31BD788
-:10D0C0001D8B77F28C2CC4AF8AED2AE2474580E1B4
-:10D0D000D391E764C4C3FDAB6F47FC39BF454A80B9
-:10D0E0007FF9C62E807F4156DE867FCF4A1CFF180F
-:10D0F0005E9F5AC2F0311FCA01FF5EE2FA29213653
-:10D10000ADDE21F04FE0534778D74E2E25C037AA29
-:10D110001B4F8779DDBFDA82F3CEAFDA357D29D2B6
-:10D120008D8AFEF9FCAA7F4B073A9DA7B0380C0107
-:10D13000C73285C5E9B49BC7E3CB8D5DAE663E3192
-:10D14000F3D81B958B43412E425C49888EF3C7ED83
-:10D15000CF60FCDAB9DF1FC1B8C485AFD17DA7F5B8
-:10D16000CF6FB79310EAD341E42FA57532C685126D
-:10D1700025943D55737F44C45B2C7CC18EF02DDD1E
-:10D18000690A16D3F6A52F1F1B8CFEF015ADAF0351
-:10D19000FD047E2F31BB7C203C782AC4552A2CEE1E
-:10D1A0002356EE8E32317B4DF3AEA419A0FF48DB3F
-:10D1B000F6A23FA9B4F676D5A4B14F7A4C2A8E4B8D
-:10D1C000EBB17B2E74DFC18F08F39B3C483BBFE57E
-:10D1D000ACBF6719DD94D6ABA817956EDB8476BD1E
-:10D1E0008A6D1730EE35FF85E71C00878A7A591F54
-:10D1F0000FB54D0E99305E4B3E6262FC4917975455
-:10D200005EC7EE6594D7F2B89F98B898852FEC7EEC
-:10D21000394041B3F0C5AD0EA0A3B34D5B1C004F28
-:10D22000DA1FC6134DCA49106FD4519C51EDC3711A
-:10D23000E38CCEC23F2882DC6DD2C767926D8C4FE3
-:10D24000D15DCFF6C5B1670A7D65E1735F3C0D71B5
-:10D25000AFCD3B3F7B1AE6BDE8EF979E86B80DB297
-:10D26000C7E202FDA1E2F71F61FCA068B7D4C4CFFA
-:10D270003FCF6EC5B8CBF39F9850FF3BBFFB542602
-:10D28000E807E7777C9D0EF1944B7617A2FD61C904
-:10D290004BF99D499CF3AD48012F835711F719BBFA
-:10D2A0000FFBEBE4908DCEF3DC6113D2775BBC58BF
-:10D2B0006D198BBF73F338B1EDF1E36A457C537997
-:10D2C000DDD44937027FAB6372BC2DDEA9A3F8B071
-:10D2D0000FE97E5E7F15FBB69DC7FFC5ECDB39F815
-:10D2E00007DD9F274CFAF8B02FEAEEFDED535056BC
-:10D2F00017FF3E99A0E38EE025E276E798BC411344
-:10D30000D0CDCEFFC4383CD8AF6237C8F92F32C178
-:10D310006E795A6D457B60EB6E930BE2B64A777F70
-:10D320008CF471FEA58318174B78FCEC79D2F6C308
-:10D33000E21DB94DA2A2C6CEE2CA38DC21EECCED88
-:10D34000C0EF3CBE8CE1AD883B4B146FF691A91742
-:10D35000BF77C1E2E2CADC4D4680BF360E4DCA81BE
-:10D360007D3AA28BDF13EB8EEDCF057018A98D9B54
-:10D370004C14CFC7F5F1B67D627CF8FC261E47D968
-:10D38000161F4948F7A110EFC3E45D4550FA98C451
-:10D39000A1471137D9144B8FC1AB8B97EC78BEFFE7
-:10D3A000183CF69B98FD49C0A5F9727C7EFC19A734
-:10D3B0006F7A2E396BD2DC4BB9879F4B441C9998FE
-:10D3C0006F552D93BBCDDB985E184BCFE5DCDE1E91
-:10D3D0003BCED77C9CF2FABD8381EF34EFDBC5F105
-:10D3E0008DE173F9F623C600E7CF412D7F86FEE27B
-:10D3F000F013D9CCFAA3E7D8B8FD556CBF10B7BF6E
-:10D40000B38AF77698FFD926A6679CAD958B827173
-:10D41000FA3FC7E54FDBBAED463C57C90E2BF29FEA
-:10D4200025F69CC3CE54488D18BFB072398F77F85B
-:10D43000A92703E0BCD27E0B81F9AC06F868CE992F
-:10D44000AACB4F40CF51337CC3E1FC24E62BCA8DDD
-:10D45000A90612D4EEBF12C0FB91137B7DA5807C80
-:10D46000695AA6BFD7D1A4B80EA4D0FE9A0A240F39
-:10D47000E8B3EDF14CDFFF64AFACB38781ED19D6B3
-:10D4800075D163C0FDB41B422E5A85D82D4D197835
-:10D49000907313B7928E21DDE8DF7E64D9B61E70DB
-:10D4A000CFCA413C1294DB3D6DF75BB03F27898DBD
-:10D4B000B3261FF6C926FC0A3094BBF6825DC2DA99
-:10D4C0008FF483FB3B2E62F5C0FB0AEBF8BDC7B5BA
-:10D4D000763FCADB8474E361F75E849DC899A3E854
-:10D4E000EEC5247BF5F994987B90825FE3153A0AA8
-:10D4F000FF71FCDD87E442B67EB057F54D8FCE3725
-:10D50000398D7842503EC186F1CC361B9B9F982FB7
-:10D510009D0FF2030A26369F81E100E8E1745E3137
-:10D52000744CF0DE139DDFD198F9E9F4B83BCC5C84
-:10D530003E2844013E623337110EE78BFA38D300A0
-:10D5400081B803671B5C6939ED274B9A6482B80583
-:10D55000179C827BE37831EDBABBB4F7C5EAE11FD3
-:10D56000A3D05FD468043FBF5982E333E90CB80607
-:10D5700040509A8C008C5FD9443E84FAA2AFEE20D2
-:10D580009E3FCB6A0F62B901F2344D497217741B8A
-:10D5900042C8C36B0A0A32FA43BD5919060FE61B8B
-:10D5A00015A0A3C9FE0CC310987EC1AAC631846C15
-:10D5B000259503C0A2645EE56D7CA307E01541A735
-:10D5C0001D09781B0137B78A3C6580F0BEC2566BD7
-:10D5D0005BDE6BA67C716BAFB67C00F23500FC1B8A
-:10D5E000603C6FE32A88F331FB5699E9B893371A08
-:10D5F00090EEC6466C78FE20E14EC89F09A9B4FAA9
-:10D60000E2DC976EB3F3F07A1DF1F1AD3C1E79B216
-:10D61000DFEF81ABDE23B93C26AEF030B88FDD62A0
-:10D620009EFDA4594B871B2FCABDE8FC9E84BDA755
-:10D63000ED9D45AE5BFAD1F939371858FCACD9FFEE
-:10D640001BA8DFF721BF01AA8C25E1FB25E0C37FE2
-:10D650004EC5F98871AA76B37355D56A437005E251
-:10D66000AF5B02F916DDBF70CCFEB5B2FDAB3F82F9
-:10D67000FB57DE7084ED5FFDA6BD466E8F8773CBD2
-:10D6800056E2D901A6A71D6B661428745F524CADF3
-:10D6900055B0AF2A995E50DC1FE1FA425CB8F2F94E
-:10D6A0007504D7ADA737FF7C30E8F5CD064F5F1284
-:10D6B0008597A877C8CCE2C4A659FD0D304EC5E3C6
-:10D6C000E12A38FFBE7AFA7DF403F76DBE181A4CD2
-:10D6D000E7DB770C37A7F071B7366F467FE656C0A9
-:10D6E0006337B8EEFD2B404E268607C3EF3678D45D
-:10D6F0001D41F818204FBFEFE4F728F2EA252FC8A4
-:10D7000089141395A3347DCFCCCE31C7CC324F9939
-:10D710009DD1D9DC4B01BD386F9A01CF534E9E4647
-:10D72000D7CFE3FFCC8A4EBE88FD147844487512EB
-:10D730009C730A9CFE3FEBF1E6B1A45EB47CECF175
-:10D74000A3F7835D4FB4DBB28C78E66AEE4353FCFB
-:10D75000D9A56B57F88015ECA1A23EE065BC730219
-:10D760006D7716DAC138B08E5DC72FCA00EFABDD1A
-:10D77000D7D8EF4DCBE8787D12D38F2F97DD2B8A4A
-:10D78000FDFE77B3F03B327DC41BBDF7F777C08752
-:10D790003273D8318DEE6F79EE2523C06145D2F911
-:10D7A000D1F1FC9E89E6D174F95A1BC8E97D115369
-:10D7B000DC7B04FD2D4CBF7877D90C0FF8E11F16E8
-:10D7C000F704B83C2BE07CB7A04F6931635A9AB894
-:10D7D00031305870B959085FE8FC8A727628203FCA
-:10D7E0000B89465E32F93801F49187F36482716ADD
-:10D7F0002E5527DF6E057BB903DE05A96C84E16F2A
-:10D80000CED0DF039D34E68802EF158CCFA1E2581D
-:10D8100082F769F4E5B7C6DC139DEC9DE529E0E5E8
-:10D8200097F0FF415CE7A49C3B3C055A39A154F7B3
-:10D83000837D3EF8AD1C576F7CA00D3E3E84EB2BE4
-:10D84000160A9FEB619DB35631305D191EB1708C85
-:10D85000854BC19FE7317B610C3C6EBE5CDD98124D
-:10D86000070EEDD75DDD0FE4A6805F2C1C9AA02E7D
-:10D87000EA4DA620E8814D4A18E1D844E118E07E3F
-:10D88000ABC274CD3E8BF970FDE156FE3D169EB1E4
-:10D8900070A4FA05EA0FE307D9D10EF636C00BE300
-:10D8A00000AA3F34D1EF6FF651C923C0FB42633168
-:10D8B000CEF02682B022AF489505E8977131FF0A75
-:10D8C00095E70C1FFECCEC57C51136FF716E162F75
-:10D8D00043E17134061E4763F040776E899DE72B64
-:10D8E000F08F5171F083E3C1220B3FDF641237DC0C
-:10D8F000FFCFFE64B893F185F8F2716CC4D7D60FF0
-:10D90000D33BD8FB1C12F1B77D77D17E425E15E385
-:10D910003FF3CD2EA48F7CE24D81F72020C810E686
-:10D9200029E6354CF2FDD49206EF378D4FD1BE0F6C
-:10D9300021C617FB92CFE1974F027BE11C9A4F94CF
-:10D94000CFB5EB16FD5559B89ED593F4443F391821
-:10D95000434744FB13EB4B4921217C3F4432E33DD9
-:10D9600027FA5FC0D8293A9E881FB5DBA7545B58B9
-:10D970009C0461711221DCCF3C5E9EC7DF6922E608
-:10D9800084EFF290EF92A2F37BDA2229F86E029FE5
-:10D99000DFB937CC0188D77850F26F86719AA5B776
-:10D9A0000703BCA83E760DDED38F29BF74B8B11C27
-:10D9B000CA69BD79588FAF6BA1CCEC64F4FC8FEFD2
-:10D9C000A1B4E7E3CC9E46C94D211AFACCB332FA92
-:10D9D000BE95B8BBE37B69C4AF40DA6861F7D06E2F
-:10D9E0003EFC18EEDF5BD69BDF007A2B224105DF81
-:10D9F000F971E9F1B0433CED177BFEE5EFBA28ADD4
-:10DA00009900D77D966BFB801C13FAC2FB16DF1FB3
-:10DA100060BDFB2C8C3F1FF58E7817E4C2ECDC61F7
-:10DA20008786D3D460F6E1BB0BF7025E5178E6003F
-:10DA30005ED1B6FBA0EB2E88576F5846C0FDFB1891
-:10DA4000BC32337BDA6CCAB6601D796BD46FB4F329
-:10DA50006A8317978B1DE987A4912AF4E9F0DE0207
-:10DA6000C3CF7D165300F4B6BC87597CC41CE27F3B
-:10DA7000BA5AC2770074FAFA5C0BB37BCFFDB505D6
-:10DA8000E99C36DE50097E2E0B7FCFA11F7B77A746
-:10DA90006DBC6A4D7BD877733AE2E15CEE3F3C2E79
-:10DAA000B173CB5C4B21BBF7BB5EBDA8C5C7D8F13A
-:10DAB00013F61BD36E9FC4EC24FB5437C6838976C0
-:10DAC000E72D4C8E5F34F7DD60B8C27DF079E64E0D
-:10DAD00003959468FEA4C532239E5E20FA6B3B97A3
-:10DAE0008BF30431AF6EEC1E3D4FAC5EA11ED09F98
-:10DAF00027D403FFCC79C2F5887A60156DFF848145
-:10DB0000F9DF88E2EB3F59A30775B1327DF080CD94
-:10DB1000DBC54AD327B8DE48359CFE5A7BB5A897AB
-:10DB2000BE348F1C1B167DB74D52E80CF1DD0DFF86
-:10DB3000729043CA0C827281F29F7BE2C50BD9EDD1
-:10DB4000793D601C41970F1BDC35D52C8E01FDC043
-:10DB5000BEA5B351CF9BBAB404D396A397AF01FA35
-:10DB6000CCE3701E60E5F69324463792E41F60858F
-:10DB7000F87CAF6C073FEBC27A99FBF1D87B575327
-:10DB800027C869F0FD9859C5F3E13E3BDBEF63849C
-:10DB9000BD5B9377D0E4ABA3E965923BC1AAD13BCF
-:10DBA0002F9302CC938C74F46B8B7B8CC748169BA1
-:10DBB000EF1AE637B8B8260BE39BF7A97A3BD5589E
-:10DBC0002BD393C75AD9BECFE6EFDB019EC13B13DF
-:10DBD000B31537DA0D67478CEC7D353A0FC4438BAC
-:10DBE000BE9F22DE4F515B3F04EBEFB3C4F6A3B000
-:10DBF000FE393EC7C2FD354B7E31ACE732F14EB047
-:10DC0000221EBA15804FDEF0C6C3C0F73AE6F30114
-:10DC100009F87CC56529D413EC68752A9EDB9AB98E
-:10DC2000DE7FAE6E7FFA6C9A96EDF8C001E7C3BB5B
-:10DC3000F93E9D539AF03D8A452FC9789F9AA26F6D
-:10DC4000FA8FB0FD9C6C761F84DD6710F2EF866F53
-:10DC50007B77F7613D763F41E85DF9E64010E6B736
-:10DC60006FB98CF62A2A1F75EF9314D6B17B0BB1CE
-:10DC7000FAD812ABCAE338D93E2E71B17112D17302
-:10DC80005EC44A821A7ACE53DC0ACC3F2FE220418E
-:10DC90000AF773A737AF9B48F13C90A1E2F98F4A8E
-:10DCA0009B46D407A3FEF1467847AB91AFE740DD32
-:10DCB000D469F0EECAEBA472D5205AA720EC4F65C8
-:10DCC000C44D4F6FD9517DACD0A5D70363F5C4A225
-:10DCD000864757C11B2DCDF001C6379B30BEB89D7E
-:10DCE000FE68BE39AEDE48C8A3883F37BCF4CCAD71
-:10DCF000F02EC50D670C2E98DF34AB9BD153DD257C
-:10DD00007C37A19C84A64379799DEC0AD1560748BB
-:10DD1000DD75202F857C1770095DDE6FF6801CB0E5
-:10DD2000C8AE15B04EF36D3688BF18DD323015E43D
-:10DD3000DC3EB38AF6C93C4B5FDB1C0D3EEF4B6506
-:10DD4000EF091C48EDADFF6E5E771DC8BB5D3C9EC4
-:10DD5000ADF1E49DB630D69B9A8AFA9A90EF317A6B
-:10DD6000ACB0838DEF2BB7D9C1B4FA2F91373C6E8D
-:10DD7000A1E5B75EABE27DB88230F3A7B693EF972B
-:10DD8000FDABF83945F7BD88EB0DEDE47D14CE3AD7
-:10DD9000FDF4552BD7CFDC6410E89BA1CBEB16E24A
-:10DDA0003DDA8624D70AB433307DA6E578E9BA098E
-:10DDB000F0FD6D99D94D2ECB4847FBF62CEC19D6CA
-:10DDC000D02F9514B86F5F0EB970FE35BA2F5F9ED5
-:10DDD000B07A028877B5D7C5F79705399C425D9927
-:10DDE000FD3DD095BD8FC1CEA33745CFA34DC00F0C
-:10DDF000E07D19101B191B8E18E1DC7C8EAAE888C7
-:10DE00005F74D1805F3779C3B24B339FE356662F7F
-:10DE10009866F51E023E122079DDA872424AACDEF9
-:10DE20005C880F6F9D4C5C9BE97A769FCE93549AE9
-:10DE30001FB325CB23D1FC4E5038816FBE24072160
-:10DE4000CE6427DC67A3FD2E68AA3666D171037500
-:10DE500032DAFB1770BBF969359099ACC18F5F2638
-:10DE6000B1714FABFEDF423FA73F31A11DFCF4096A
-:10DE70006B5C797B7B12E397AF71793624C98DF99E
-:10DE800050F3ABAF77A5F30A455C4300EEA5DB2E5C
-:10DE9000C8F09ED28D5C2F2B7EBC6915D86B266E88
-:10DEA000685580EFF882AE4210B553B6795490436E
-:10DEB000D3B6FB54D8DEE97595189F34A3BEFA009B
-:10DEC000E4EF0CD562FEBA24FFDF00AE37AD69DDAA
-:10DED0000FE8D2A79A28F8BECFE74CDF4AE3F3E871
-:10DEE00015F1EC732236E71A00BFDBC67FA84901A3
-:10DEF000957EE22A363EED4F4D82FE2A5BF341AE1F
-:10DF0000652E65FD6592BDCB9DEE68BF632F3749D9
-:10DF10005A3B42DE4F16211E3DFDE0A29E60670F78
-:10DF2000FCC944FA66719A4885EFDDF9FDB270FFCD
-:10DF3000293ABF74C8C4F08698592AF0C96B66782C
-:10DF4000E4B2825EF0E3272BAD4017A93EB7511B28
-:10DF50007798B7AE78C09B80A71613DAE3BE1CC2D1
-:10DF6000F4F62F1FB505F9F97400E0AD9053B363D3
-:10DF7000FC2E513A67784FBB08C23C444AA4152E88
-:10DF8000A2CD935006CCAB4712E3633546F74C184D
-:10DF9000AFC66A72C178B3CD7D8DC097DAEC9A3C7A
-:10DFA0002E6D34D72B779FDE9702FBFAE590E5992B
-:10DFB000A02F870CBF413ED4115E3D66F566273128
-:10DFC0007D0EF57B517FD749EB409083AF097DCB28
-:10DFD00033AB27AC57B49B9AC4F4A89DDC3F27E829
-:10DFE00020B58978370D445079776AE0313189C995
-:10DFF0005191EE54DD0146472C9E73A73D64EE0D12
-:10E00000F4BAAB37E6537DC4E681F895FABE1EF04C
-:10E01000D3503A9F98A489DBBB91D37F6A532BD20C
-:10E02000DDD59E034670F886945A4E3F04F910D011
-:10E030000FE3CFA16EFC1D1EF4FB015FE0FBD34597
-:10E04000CAC03870DC67B1EE544EF7F773BA0638C1
-:10E05000407939CF8BF2451C5E85F240A7366EAC15
-:10E060009DDC5E9A41403F2C5CDA15D3724E670B03
-:10E07000CC8FA29D7441EAA3681F4DF55663BAA0E8
-:10E08000A01ABF676C9885F8B1607DFCF7C5DEE229
-:10E090007AEFB9D306F68E94C1DA15F04F9437595A
-:10E0A00055CE0FFD0F023E9CA95BF7E46077D4DEEE
-:10E0B0007BA686C9C112AB5EAF5BC6F161F7E7FB19
-:10E0C00052005FBEB4544FBC13E8648BEC5A0EFB95
-:10E0D000585328B9E3E09F16CE00D78A9A2FD0AFC5
-:10E0E0005A4EC2E8573DC3F53137F79F0A3F6BB030
-:10E0F00086F1D7D32AE3EFA7A51409E803F83BF08C
-:10E10000D9D3271EC97C10F048B2A35E037C738765
-:10E11000063F166EDF54D595FEF3A6CBECDE4E48D7
-:10E1200021362D7F167822F86DECBC37F17D1578FD
-:10E13000383A2A87362571BB686FDA6FF9A317D191
-:10E140002EFA32DFBF1AC037A0E73502DF8618D8B3
-:10E150007B697A3A1EF903F1EF5D8F3D95897687E9
-:10E160001C4AB7F0BE1AD0751CBCD8C3F1F231AB53
-:10E170007F17CC3F96DF9F91FCBF4DE91D6DBFEB34
-:10E18000E42D03666BFA59CFE1F1A5EAEFE98A03C2
-:10E19000AF285C4957D8E712BA330007B241726919
-:10E1A000E3DD533730FBFE7B9C3F88EF222FE03DC1
-:10E1B00036FAAEDC7B494CEE1B4124670499DC2720
-:10E1C000865BBA821C5F60F5DE827696470D04DFBF
-:10E1D0005195F210DF536B9E38F9ED70482DBDD08C
-:10E1E0005F42DC06F0832E78D88DE7BD15BFB320E3
-:10E1F0009E9D4862F1112B6A54C4B7336A35C6E15B
-:10E200009D3951DA13FC2D814F981C4A044F813FF0
-:10E210003B39BF1178D76B2DC3BB1AC56B05BC1337
-:10E220007254E0E7992D370F057A13EDA378E31ABE
-:10E2300022F06616FDDE6B4D5886FDA1FBD60A70F6
-:10E24000E8BDB615F957A27D137E34B17F82AF0FBA
-:10E25000B319747E03838DCD3F3581DF3F2AD7F418
-:10E260007C98EE87641BA1C77FB85A29E8A9B90337
-:10E270003AB8C7C6DE77AEFACB1CF4DF0B3F8CF0A2
-:10E280008F8AF1536C0C1F12F9515ACCFE4EB618FE
-:10E290003F9F1BF93AF39B88DF33B0780B8B63DA2F
-:10E2A0000545C02F8E5B83DAFBB9D72AC4AB0CA51A
-:10E2B000D861CBC2795D0BAC82E653971A491F7ABD
-:10E2C0007EFA72D4DE4607AD3FA1355C7C3D5DDA57
-:10E2D0002E6378DA24B0EB126F29E8136883073CC9
-:10E2E0006F66FD1257AD6E9E03389CC5BE887527BC
-:10E2F000925B89F6E31E1BF77BF1F2583A37F2F294
-:10E30000D39C8E3AA6D38013E8F42612580EF1154A
-:10E31000F4A08D71696D744A0FDED07F01EF577CD8
-:10E3200017F938745A604BD3D06924CCE894D3A33E
-:10E33000B346F5C6D34FA6D8983C72D614E6823CB5
-:10E3400071FA30AC9CFE30BA5E40E91AE83500F450
-:10E35000D919E0C9E8AC97B71AE3197BD530BDFAF3
-:10E36000CB64B6DE05377AF7C27BC80BA85E2FD127
-:10E37000AAD59CAE13C33DE494987C72023FB96960
-:10E380004C381FE4AD1BEC169DF1575BE0A68C1DCD
-:10E39000438221BAEFEECB84F189134FDDFD20F0EB
-:10E3A00087476D78AF49C89FB424FF3CC0CB44F485
-:10E3B0004CF1D20B76A7C55FDBD8F92F81DF7BEC60
-:10E3C0005203E99382785EA1C5F3B1BE5619E09A73
-:10E3D00092E4CF5093E9F836EF38730FBABE2CAA07
-:10E3E000DFD2FC4F697E2D5DC7D64E61C2F355B6B4
-:10E3F00051FFB83D2EB0F6A6D7C1BFBF25C9FBEF70
-:10E40000308F16B32F00FB7C53B75619E395AED26D
-:10E410006F5F017638BA9EA3B70DF8DD2CFA75F65A
-:10E420001DBE2A2815F6E291DC5E5CD13004EDC8F1
-:10E430001ABBF12F6D57B01B7734AE83D33DC56F38
-:10E440003CC739725A65E08B82AF6CB475E2F81C38
-:10E450002670AE10F4057C09F45A113F00F6433BD8
-:10E46000FA2382887F90770E8DF29BB5D586B8F11E
-:10E470004DDB6DB6B87C9434FCEDE507C53B8A8C6A
-:10E48000AF6EB769F48A9AEAA3E94C4F65EF92DD63
-:10E49000CFCFF2EB5678DEEB931ABDD73CCA640CB3
-:10E4A000C07B8AF460E67669E223A506296487B812
-:10E4B000BB6F6811E0D137064CD7FDBBAF280BEC22
-:10E4C00025870D9E1504E310103E393D09BEB35358
-:10E4D000CFED9CB9C76C5EF0EFB74866E49F2D475F
-:10E4E000AC01909F2D7603DAC71B779B902E2EF5FB
-:10E4F000B1723B465067EF10FE9A4B6FCF4901BE99
-:10E50000FF24F75B3E79C735687F14765945A13003
-:10E51000EF04662976EF326F6957B49B0A3B6DBAF8
-:10E520007996C4828458FF8A99AD2B5DF14B60FFC8
-:10E53000DED4417CC35F6D46A1EF1E06F8563C1445
-:10E5400036C27955E8BB421EF76CEEB517E21C7A6D
-:10E550001631B3D8A6668301D6B789A25172567B0D
-:10E56000BC12F8B3A97D1CC1099B865F4E5ECDE24B
-:10E5700008DAF2BCDD6F791CC1D8E3475FC4F7F25B
-:10E58000CCFE8F74ED0AD3ACF1DEE19EBEF4416C9B
-:10E590009F08EFA71BD8FB3BB1DF4D76CEB795CADE
-:10E5A0006E78FFE9AF3F4E72C7B1C74CFFCB6CFC32
-:10E5B0003D11B1F6B3E8F8FFEE29A0FB26D9DBFC4C
-:10E5C0009499E037EBC84F193BEF43AABF473CF99A
-:10E5D000141B4727C66BDF9E9DBFDAEA19897F8728
-:10E5E0008DF53B54D36F8E9DE93DD32582F1EDE44B
-:10E5F0005B82725AE009857B373B2DCF7EE7D830AE
-:10E600002BFA715A65E003970EF7E98EFEF304E7E3
-:10E610004D311F42FC7DE3C5694C877776E2AC6FD4
-:10E62000849DC9E7E92AF3374877F4C5F3FF748B73
-:10E6300049D2C6E567D9251D3D097BF33ECB48BCD1
-:10E64000BF0876F978F08BF5C366818F348DC1C52C
-:10E6500013079F84DF4FC0B92AD79BAB30BB18DEAE
-:10E66000434BF532FE995A44D07F3652F2223C6E2B
-:10E67000B6337D69138F7FBBF4368B57CDCE75E3F0
-:10E68000EF71A272A2D03E02E3A95E3468E2A9044F
-:10E690009E543D47E5B1CE6EC8E84A9C9B93391F16
-:10E6A00076C17B129A7AEE87800744E540F755667B
-:10E6B0005D3E73898B281A3991ECCDD0E5BBFB5CAC
-:10E6C00056382F752F72EBDA09BC13F17CF8930AD8
-:10E6D000EB76A1DDA9139FCF48C98F78037C0DECA1
-:10E6E000C1F7F27DA2EB9D037834B6287C498B37C5
-:10E6F00062BD1DADEBE83237F2C2E3CBE87C295FA7
-:10E7000098B3366B7906C2DD45E01C71729919BF6A
-:10E71000DFCBDB273F3E0BEFC926AF72A33D36D9D7
-:10E720005BF93ADCE349AE74E3BD81B9D59204E705
-:10E7300074CA67B0DDC6652E4CC57EBB68B9648BF4
-:10E74000BE239E487EADB2DB74FADE15E4D72AFB09
-:10E7500088F6F2CB60F6BC097EFDB206D90D78B121
-:10E76000B2B813C6F7AEAB65F7D9F637B0B8BA751D
-:10E77000D3991C11E39E7FC989F2E2BCF87D29DEA2
-:10E780006FD2A7A0BFFF9B74E0B39B6CFEC7EC1ACF
-:10E790007EB9AE618485BFAFAC933FF4C705F71B6C
-:10E7A000D0C726819E34648DD21BE9FE29684FE6CE
-:10E7B0008587597A039EFA3F8077482F1DFE3C13C8
-:10E7C000F64FF8EB843F4F8C23FC7D92E47F463B71
-:10E7D0007E7B7F9EDE0F253BCC18879B23B3385C66
-:10E7E0008D9C25B08F2B411FA478B6F28815E1B11E
-:10E7F000F25B466F749E2FC0388DF66CC41F214F9C
-:10E80000E93C07BF4BA2F3AC30B4666ADF21D5CC3C
-:10E81000B3FECAF38C8953E5F392ED0ACEB785585F
-:10E820003D30AF7AA3E7B01FE4EC792BDAED5ABCA8
-:10E830003758E03DD916728305DE99DD6EF337C295
-:10E84000FECB3D5A1DA067EF6F18D61FE69BC8AFE1
-:10E85000DA6CCB7B03E645D7F716F20957F8D2F30B
-:10E86000EEE8FAAEE08F7D0FDA7D8FF51FFE3EEB0E
-:10E87000AF80DF8FC10CDDA84F499CEFC6E295D475
-:10E88000B0F76B880FA2F4837199814C125C49E157
-:10E89000543588E117994BF8EFC7D1E3C1269BEFB8
-:10E8A00034AC57D0DD15E0D30CF37EDCE63B0FF53E
-:10E8B000611E70CF83F299562EAF5E341AA27A543D
-:10E8C0004A0AE357ADC904E36762FDDD76FB94AF06
-:10E8D000A05D7A3FBFE41AF8BDF09C38AE08BF10C7
-:10E8E000C63D887BA665E09785F8AD3AB559FF7BB4
-:10E8F00074F470D86EF359A1DF401E7B2F0EF06ABE
-:10E9000025B9223C1C0E84873FD941E1615729BEBD
-:10E910000050726665009C5BCC2C1E60E772068717
-:10E920009677181C761D37201E3F410620DD0D35D9
-:10E930005CBC1BFAA7FCA31BF433A6B55682F36F8D
-:10E94000E712B701F86CB7568F6CB832DEF6743048
-:10E95000BCEDE560FB703FECC3B0B7995DE60A78AB
-:10E960007B0D8CF73DE07EBD63C4D5F3178A57C39A
-:10E970001C1ABCBADAB82889DF8F8CED8F9E87D03D
-:10E980004FB0779709F951F94E761FB47CCF293CE7
-:10E990007797BF6A42A42C78D5C2EE35D4B1F2F392
-:10E9A000B9F1FDF9631CEC9C55567B9F472F77030B
-:10E9B000F8FD97DE8BAE3E72D43F9A3281DD13585C
-:10E9C0006911F1A0CC4FEAE07896D2C3E705B9927D
-:10E9D0005248F0BE80C3C6E206DBDF0760749BC608
-:10E9E000DBB95C6E09E01D7B3F200DDE8B667E6E21
-:10E9F000C417D960F580DC4F298AA9672B423F6A8A
-:10EA00005ACC7D82390EEE4735920CE023B596F84C
-:10EA1000F7805A1D42AFB3E2B94EE1F36AB41BD995
-:10EA20003B2E7633AE7B71324929C6BC82F23CB6AE
-:10EA30001F91267B0DBA7B26294556DD3B0A69BE10
-:10EA40004EBA7CE7195D75F5BBF87BE9CABB950C3E
-:10EA5000D095F7A81CAACBF75C7A83AE7E16453812
-:10EA60006DBEF79A5B74F5FB564FD1E5AF5D7FA79E
-:10EA7000AE7EFFE06C5DF975DB4A75E5836A17EBE6
-:10EA8000F2D7D73FA8AB2F27D0B35F72B0F38E2C4D
-:10EA9000F46CFB703FDE2BB29B2593E63C57CDF721
-:10EAA00023D7519401FEC755F6711970DE6C4CCE18
-:10EAB0007686E3F42BD27FF41CF6BC436F3FCBE3A6
-:10EAC000F6B3F3FB281781DF57B19FE201FE7E26E4
-:10EAD000FFF30E6E0F98E586FAFCDD0AC583EB980E
-:10EAE000EE30A35D2CB6FF6A873BEEF94936785CC1
-:10EAF000C552627809BCEC085E2FF3F9FFB3F03A17
-:10EB00001413F723CE6FB1EDCE390C5CBFF637018D
-:10EB10007F6B3BA79156D987E7B4CFCF0708F05357
-:10EB2000827A4B223D408C2F49BE4FA09F587EEAEF
-:10EB30005B3A8F9D330D5EBC8F95E8FC76CE117BE2
-:10EB40007E2B9C81FB916CD4C1E9D3363AF7EACE97
-:10EB50006FAB92B3F1FCB64AF5665CCDF9ED5307A5
-:10EB600032270A77373BC78AFD347ADCEC1EA75E72
-:10EB70007F69AF6F53F947D7B90EF43809F4B2146F
-:10EB8000A67FEF64F7FDC5B857A16F13E755E8DB23
-:10EB900026E259A3C8B85F4627AC7F5EF87E8BFC9F
-:10EBA0000FE9D74EE7F7907FEFAB1E8CEF7F7F82A8
-:10EBB0004CE0DD954B4523F19E74227CFC90DB5F9D
-:10EBC000DE7532F87664BF787F59C915EF57BC3FC0
-:10EBD0009EC5514E89795F778493D1CB2427C7078F
-:10EBE00013B3439C7BD98EF1F0E76EF9087F2FD2E7
-:10EBF000B9BA61C303F87BC03C4B206E2660B3A357
-:10EC00007D6FCAF811C397DB3578C47FDF58FE2BC0
-:10EC1000EF38C07E336547EFB4802D31FE4CE2EB18
-:10EC2000234AF81A8C977EED0CFE3E9A29BBFAA671
-:10EC300031FBA23ECE2CD6EE33656939E29BC897F4
-:10EC40004508C695B5E515769FB82CA2601C5A17E5
-:10EC5000279783DC2E94105E5709CFD8EF029EEFE2
-:10EC60008F3FC3EEC55BE2EB1B3F71EAFD16B1F7C8
-:10EC70005212DDB798CDF7E952D128BC5F3FC5E805
-:10EC8000EE7B35762A01A7A6CBA792802FEC81FBDD
-:10EC90002E71FAFF9193F1B33DDE13296096CE35C4
-:10ECA000B7E603FEE7723B789C78FC0AA0BBB19103
-:10ECB000A21F241E7FA993DBED78BC7B81D3CDFD01
-:10ECC00092FA78FC8EEE134D36C6976FD3A2F0FB06
-:10ECD00008E8F5FE8D2AC6EDCDA7730880FD6D937B
-:10ECE0008AF6B70F2E9B08F8414E6D509F8138B3BE
-:10ECF000928DBD373E4EF325E34DE8B799BF89BDF0
-:10ED00003342C65B82E07F2DD9F4403ABC1BFE192A
-:10ED1000A5DB4554699ABFF1098C7BF9E0F823180B
-:10ED20005F7D06E8997E2FF9F667D301FEBB8CD58F
-:10ED3000D70DA1E9A2ED92EE7E44698D459717F1BA
-:10ED40007B62FF8814BD37E1A6726433DF2F21AFE9
-:10ED50008745FD5D9B9DCCDE8171F0E513D8FDA854
-:10ED6000FD27D9F9FD401F16DF171A7F7BF110BA76
-:10ED70008EF169EC7D96D8784002CE31783F85C718
-:10ED8000EB8EFF4469BBC7C2CABDB642CDFD80D77A
-:10ED90009755E2BE8CFF35B39B8CCF6271ED09E3D2
-:10EDA0000433DAC5F9F703B9D92E3E307A7FE76824
-:10EDB0003CBCF9430C5DEF3FC9E201E7BDCDDEC7C6
-:10EDC000EA886F7EC8E7FDC1F101773D4FE1F1416F
-:10EDD00011E3E21F5CBE7935BE3FE39308C4659E34
-:10EDE000BA1CFF9E58B253E84DFEB6FB34B03F53F9
-:10EDF0008B16B4E5812C6FF3DDA7BB6F73F5FCE6D2
-:10EE0000CAFC64A593F91162F97B2CDEFF9FE2EF47
-:10EE100053C61FC884FBF734FD1DDEC3DFC1F86392
-:10EE20002C9DC7F27331AFD8F996450CBAB8E16999
-:10EE3000C0074668F9B911F93C55EFD9BB30D94A3A
-:10EE400070A5847A80E4A270186E0BA6E4D221FE2D
-:10EE500007B1ADBCC8008000000000001F8B080097
-:10EE600000000000000BDD7D797C54D5F5F87DF3C2
-:10EE7000DE2C496692C96412929084093B15718018
-:10EE8000B008A82F04421482032AA2069D84256C90
-:10EE90002191AAC54A9B810444441AEA8614ED4094
-:10EEA00041F95AF41B116B6C834E04115C6345C528
-:10EEB0007E15C3229B2811AC1FEAC6F79C73EFCDC9
-:10EEC000CC9B4C58FCFAFBE7173FEDE5BEBB9FFD22
-:10EED0009CBB4CAD737D82BF2F632929EC369F9D6F
-:10EEE000B1B3F87755383D611F69760E62ECD138C1
-:10EEF000BFCD990AF5DECC1CC912191BF856BDE22C
-:10EF000087FA271536B93E46BB1FE34C8C41BB2D13
-:10EF1000665EBE05EBF50D97A739F37F8C83FEB6D1
-:10EF2000DA20857A8CD99C877A3396C74C2C496530
-:10EF3000AC58F1A7E17815B69695A5503A6FF7B79A
-:10EF40001628620F5BFCE95A1E63814C8B77636E57
-:10EF5000FB713D4EA804EDD2168C6407073266B5EE
-:10EF6000B140DC00C6148D05CC03701CFF2213B425
-:10EF7000D72633B65C61AC19E686F559EF74134BAE
-:10EF800063ECD736467F81910C27C30207E28335B5
-:10EF900030CE8F4CEF8970F889E9BD705E9F30BD2F
-:10EFA00037A672DC5AB14ECDC4FCCFC58047A953F9
-:10EFB000E1E3305F4F9F83B1E923993F121E321D79
-:10EFC000E7D4A85EFE2337E5B440F9E7FB6FCE61D6
-:10EFD00090EE787848524B8CFA32FD437595771451
-:10EFE00034BDBFDA4F6912633ACEE781EA99DE5148
-:10EFF000DD1973421EE735DDE2EB991CD1CF65CEFA
-:10F0000064C253E2E55B9ABBBA193BB442752A1E4F
-:10F010004899A908DB1F0C26156DEDCBDBB90DED6A
-:10F02000F83C55A633D60DD66DD7BE6B11B03BCB91
-:10F0300070BD8CFAED689DA5024F16E6B5617BCBDD
-:10F04000816B6CAC2BF4A7E84ECC4B7AB81C4640D5
-:10F050007AB8173F5D0E74A7F86F71523B3D459625
-:10F060009FCDC5F18B282FC767592EC6323A861718
-:10F0700053743FF67394E9A598365802973861BDEA
-:10F080000DF16C662C7A2E17F8EB21D6C598DD7938
-:10F09000F812311ECC6F63823E1BFB3969F3CDC57C
-:10F0A000F4CACEAD352AD24D9C53D46F61887728EF
-:10F0B000BF1DCB597A0BBB16E07D254C763964FF1A
-:10F0C00071F400F3009C125B0F310F8C9F88F88B5A
-:10F0D00001376B32E7ABBF3356149BEF142A5F281E
-:10F0E000E6B901F8C5E40EF3CB53D0EEB9BEC8774C
-:10F0F0007EC177FA350CCA37FCD1A52C87F2AEBA9F
-:10F10000C784F4E16E667A10E121E02EFBDFEBB4F8
-:10F11000101C900F9573F0E1AA8BE4C30D7F1C6760
-:10F120008AC379FE96797B78B0DCB3D806F927E6F6
-:10F130003BBDCB21DF6D05101AD4CF5E10BF5E85BD
-:10F14000FA6B9D7C9D5D1E628BE3A076EEDA560D18
-:10F15000E5C3B885CD9A0DEAE7D6B668289F5EFA72
-:10F16000ED9A1CA4AB639F5FA33AB0FFAF65FF00AD
-:10F1700020E0F7E14E8E4336B4B40BE267B393C39D
-:10F1800057AEE38FF1FEA7089F55AD0556A896B37D
-:10F190008069282F8F29FE3FA774C37EE32707FBD2
-:10F1A000227A39BDBD74F8789F32C8BF24F95D1941
-:10F1B00099C9D2191BB1C14CF01CB1E1E15B11DE60
-:10F1C00023368CD114A8F2841652345C6795AE05B0
-:10F1D00020FFA6D34CE31FFB7C761705E7FBB19518
-:10F1E000F58801DF9D62FD9B9D5C7EFDC3129B6ED9
-:10F1F0005F6D933B9C9F863345CAD757857C4DEC0A
-:10F2000006F09877F72992AF7F717AA8DF27B4FAD2
-:10F210009D99342FE60DC0A7D99BDE23792FC79186
-:10F22000F5E66C5EB714EB65DDE1ECAF7AB05D4BF3
-:10F230001CD2CFB7711C5FDFDE1D1F5CA410FDF771
-:10F24000F75D1A830F59C86A4A270CD878AADB4C95
-:10F250004301AFADADF928F7A0CBC5C89785C91E4E
-:10F26000035ED6B53AE3915FCEA70F0E087C5E2809
-:10F270001D6E4FE67C03F25F473C05066BC11AF832
-:10F28000BECEEE3F8AF23FCF1E4CC9872AB5E7D7E4
-:10F290009B2710BEA0374FFE2CBD29F4A5D49F6D2F
-:10F2A000E5029F35427FC6D09B3FC6D29B6E16BCFF
-:10F2B000BF1FAC879D307937B2F6E32E14FD9E8CCC
-:10F2C000D7D564187F84C27C386EE289034C89905C
-:10F2D00043F3045F6F1174F0948BDD3621C63A66F8
-:10F2E00009FA3495B45A5AB09F4685E8BFFD7AB9F9
-:10F2F0003C01B998928C7CD605E4A6D25E6EC6C05D
-:10F300004726CEB3F35BFA76249261C91B1200FD47
-:10F31000E7C2474E32E143EF82A984FF80B3EA6D32
-:10F32000BEBEEDE1DF3399CF7F9843EF81F54F0B00
-:10F330003EEB082F8392393E0A93B93DB3C521EACB
-:10F34000C519EBDD96CCE13C35D9C89711F81B9473
-:10F350001C037F520E9F8CF70DC575FFFDE89604C8
-:10F36000A4238927297FA2F115E6B345B41E807333
-:10F370003EB68FD63FB27DB41E0AB70FD07CD721E0
-:10F380001D21BF211D79B89E58D7373C3F49E7253D
-:10F39000627D67E3F5625C4FF43C9D274CCAB9E699
-:10F3A00099DCEA5690FF937527A5FF386A52705E84
-:10F3B000CE564DC17939857E8CD683202E04DDF062
-:10F3C0007EB6A3DC80F1977E39351DF1BC34DF9F1A
-:10F3D0005E05F5AF71E8FE64E223BD14E131C5A11D
-:10F3E0009761FA631CC7F3A0647D1AE693851D1527
-:10F3F0003DCFB9627D00CF39D84FE22816407D78E5
-:10F40000D5197B10442C8000E60DFA2151778E44EB
-:10F410003D96B89679914E53125A9BAC906F7D9859
-:10F4200079D743BE67C063B2A27EBB435F8CE9D28B
-:10F430002F55B23B97E6B3E062EA87DBA1ACB66B2F
-:10F4400090F437F05B24BDFE5ECCE3F7C99C2FC17E
-:10F450000EB92799E3F977984A3B44F2514776452C
-:10F46000041FD652BB0BE7C3FB71FD17C1877F4852
-:10F47000267F42AFA3799E870F1F0DF3E12358FF2C
-:10F480007C7CF8A4E0C3ED22ED880F5F13707B3322
-:10F49000B943FFE3C9587CE816F420E91DF910F5DB
-:10F4A0007DA39827C8CFBFC6A2F70BE0CBADB1F8BC
-:10F4B000329A1FDBFABB40FAEFC8FE1BE23AB7FDF7
-:10F4C000D76CE77897FC0CFCB253F0CBEB825F76FD
-:10F4D000717EE17A399ABFDAF44D2B97138CD525DA
-:10F4E00020FDC879EE97FC13AFBF17C967D24F91C3
-:10F4F000F093F5FF23E8FBA848135B0F30940B0053
-:10F50000B77F45EA8DA704BF048632E217F0B746FD
-:10F51000A25DF9D209B0232167777179306275F362
-:10F52000766475A6D5254C74740CA72B5D1E01CF8F
-:10F53000D87082F1BF8885B746C49BBDBD3D1F8D85
-:10F54000AFBD623D761787C7CF9D87841FCEE3325C
-:10F550009A87C7B43C42CF2B2E45D21973417AD536
-:10F56000A85695D1BC4209E042B5C9539605EDF3C2
-:10F57000DAB7B785DBDB5C30CFAB7468DF37DC1E16
-:10F58000C62779D7ED0E90676427EB26D44F4B73CF
-:10F59000393D44D3FD06B41FFA46E0AB2E93F0B5D7
-:10F5A000D2E64FC3F96DD03C26B4EB362C732A015A
-:10F5B000C263553CD28FCDAE135FC7904359AE8B1B
-:10F5C000B3073C2E2E87725D1720877A0BFC801CB8
-:10F5D000EA85F5EDE791434304BC86BACE6D0F0C86
-:10F5E00013FD5E29EAC790434370BC6839B4D5C6A1
-:10F5F000E110834F8763FD34A73E02F1047C7A85D6
-:10F600002B42AF41BBAB30BF52B45F5167EA4DF6FE
-:10F61000338BF7C6F233C6B9EC063BE50AE13FB0DF
-:10F62000C6EFFFF6DBC18C5562119FE738314FF210
-:10F630002736D41D4843FCC39F21AEF2E062EFBBE6
-:10F64000DD116FEFA80CEDD0077FDF62417837C482
-:10F6500027F6639785C7ADFC0E083205F0F29D8949
-:10F660005289C7798D8B0632F023F20FFE90837694
-:10F67000E5C9FDDF517CE484BDAC04C7DFB18DC7B3
-:10F68000494EBF353505ED7339FE7CC417CC6BB4DC
-:10F69000DAB73E04EB3DB5CBE2457DAB32CFA323D9
-:10F6A000603E95BBCC2C48728AD9B0BE994F9799D1
-:10F6B000772D6D561331AF05447C43394BFE8C27B3
-:10F6C00009E9D6BC4B65C887CCCDCB03CCB6E82CBA
-:10F6D000F89B49434DCC13110F49D6E39927223E9D
-:10F6E0009152E432E4537D9986FA9D2677359467EA
-:10F6F000F87F6528EF3C7380219F5D35CC50BF0BB0
-:10F70000F83B91F9DCC03586FADD964D34E47BD4C4
-:10F71000DD6CA8DF6B7599A1BC4F70B6A1BC7CF7FE
-:10F72000F316F4AB2FD934DFF0FDD2FADF1ADA0189
-:10F73000409ABB039D4C631CFE97352C36D49FD654
-:10F74000327B1CD26DFFD07263BB3AF3210ECF0027
-:10F7500043781E617E0BD299C65A777606B8CF0BD6
-:10F760002ADE10549BD590DB0DF9E18B378A762980
-:10F77000FD605EAB793BD9CFACA0313F47DD4CFC9F
-:10F78000138DE74AD635C9938774A0B2A012C6FB81
-:10F790009C4DC6F60CE35DD06E8E584F345D1C61F7
-:10F7A000558F8C40FA08E8CDDDD3C2EB36B3FAC1F1
-:10F7B00021FC2EE8C429E844AE5FCE5FAEDB09FF32
-:10F7C0006139287C0BD2D98C0685AD51DAAF6F66D2
-:10F7D000E3AAA59D63AC93B1A005FDEDE8F9875CB4
-:10F7E0000E37C5AD72580EC6AD583BFEB0933C3EC9
-:10F7F000B5560D5A81AED540EF28FE30AE3F1A8E79
-:10F8000017CB2F1E01076BBA915FE23CF1D1F436A2
-:10F8100038C4DAC335A1B7918F241C255C1DDECC1A
-:10F820009874E581FF387C75F64BC2F704C2372126
-:10F830000CDF9336FF4994C3A7F77EA312DDF95B73
-:10F8400006A21EEB482F391C234FA31C83FA3958FC
-:10F85000BF3201E46212F473E0879EC86FB29E6FFC
-:10F8600041997714C84545F1FFE08A888B34EBAAAB
-:10F87000230FF035A741F5A21E3EA9D9972997D1AC
-:10F88000323DCE3454D2126F1C8F126F4AE3F6FF12
-:10F8900028002F68E3B760FCB5C86BC3798227479F
-:10F8A000714E05DC9BB309A467E353283EA2338A5B
-:10F8B000FF9D62DE1AE8AFC6F1B74BCE130F494C7D
-:10F8C00021FFC29F118FF6436BCBE967B17BADD9A6
-:10F8D00089E34CF0FB693D43708260573327C029B0
-:10F8E000225E04EDD2B1FD84C7FF9880F6F04B870D
-:10F8F0004EA9A45F3E71933D2CED83F6F67580F41E
-:10F9000097B4D7C13FEA92C2ED985CECAFCD3F12FD
-:10F9100076B5F4733AEA07EC8EDE68CF74942AAFBA
-:10F92000AAA44F5B9578EFFA18FA342F4589A94FAE
-:10F93000417FE6A5A446C4E3EE3CBD13E51DC07BB4
-:10F94000087E7738C0AE512EC8AE198EF51F4D48CF
-:10F9500024BA6EDDAD067B418353364F920BE03601
-:10F9600052E85945031DE20AB7ABB2B9FA6A03B1CE
-:10F97000BC4F128BE1A7C87424D64B89882FC619B7
-:10F98000FDD1A503F8BC8A53B83D739FB09F4AC50B
-:10F99000BA2B310E97128EC3554EE671E687A3E25D
-:10F9A00097A5290EAABFC43EB214D7B3345721BBC2
-:10F9B00069A9A218F6919253F2A9FC16D17F29F4F5
-:10F9C0008DE33DD595CFCB1DE5BF678BFAD929BC1B
-:10F9D0005FE0A43E886F8BAAC684E78C143E7F69E3
-:10F9E0003F49BE192BF8A650C8CBAB7B80BC24E6A0
-:10F9F000D2C78D86F251A29CA96BF758A17C6C2FBF
-:10FA000033433A1B857209E5BCD37CA0A57758CE59
-:10FA100017F6AEDA81E2614C3A7C8F902745CCD75D
-:10FA200019E9E06A8FF1FBD83D85C7905FC7328D39
-:10FA3000FAA1EFB91CAE09AE30BDFF3EA54D1E794F
-:10FA4000CE025F87E2FD0F1663FCE16DD5BB9EB56C
-:10FA50005FEFFD026F2B849F82FB48E87FB844DA9A
-:10FA6000BE3E87CF6B76DFFD044F0DE0097C1BB2F5
-:10FA7000B4D424E1381F301A2773A6DE84F9413E3E
-:10FA80000FC338F1D25C66F7227DF637511CC4ED06
-:10FA9000778EB240DEBD963C1566D658C031202C1C
-:10FAA000179E4EC925F8AF60354D49503F69EDD7D7
-:10FAB000AC2BF90FCE514E9443D358CCB8E646B197
-:10FAC0009E098F77D5D00F4BB2297A30C63A368A45
-:10FAD00075805CD880F2E12ADBFE814AD7B05C41B8
-:10FAE0005796FEEF9029B85169DFDE662F781AD756
-:10FAF0003F6826EB20CEC9E731DDE6ABA77A7B3C39
-:10FB0000B43F512EE5F33413D3806E6E126473D379
-:10FB1000DAA6FF903DF0C3D9B3AAB4B319F5CF70FC
-:10FB2000BFA07CAE2388FB07E58DB9018A0FCD54B9
-:10FB3000685FA3B2F13D1FE6CBF3F29C24D7121409
-:10FB4000E5706F32D11997631A3B2CE945158B820A
-:10FB5000FE270BBD20FD79D0032B1200FEE56BD7ED
-:10FB600035654095FF01858F78DBABFAF7DE03FD45
-:10FB7000DE00CA69C1004C35564271F474EAE77A76
-:10FB8000D14FE03BA61CB685C7BDA17137AD67AFAD
-:10FB900099056C404CE6917C68F36F93687F15F48F
-:10FBA000298D3BC956371AF5DC494B6B3F2FFAD7E5
-:10FBB000DB3ECA0E003D7DFABBD30E0678F84C6BD7
-:10FBC00075E0F7A30BDF77E800BF4F17AA4588CF92
-:10FBD0005B85DE90F03E22F07EB9DBB70FE17D5B06
-:10FBE000F58F83FD91719205A924EF670561861158
-:10FBF000F6C39C4D0968D1B4E52BEA530C79A907EB
-:10FC00002AACAC2A565CB0B39BFBF3B336AFB374EB
-:10FC1000F6E0F8FE561CFF28C85BC4CBD1AD8E20A1
-:10FC2000FAB3723E659BFB5BD0BEF8ACD1CA42E82A
-:10FC3000AF68CD6666E77244017AF00BBC47CF73BC
-:10FC4000E7CB09D4DFF487B9DC2985B116005CFD68
-:10FC50008DB348BE44AF63FAA79EC24E00EFE9F7EA
-:10FC60008126F7F0FA0B016FFE05F77E8DF65AF448
-:10FC70003A4B034679337599312FE560B9C037B0F7
-:10FC8000DF32B47BA7D719EB9537DE4FFD97A39CE6
-:10FC900092DF61FDC96E61870E6643502ED5D8BBD9
-:10FCA00026F9CFA1774E548381DA93B1E3D5364A52
-:10FCB0008F56334AF7A5707A9DDBF8DE5D4837F33F
-:10FCC0001A9EB3603FB5C1D1CE6150C5DA081C851C
-:10FCD000F625EE1743D329B85F0CF3ACC18964E075
-:10FCE0007EB2AF9B1BDA9B9D51FBC7627D2502FE56
-:10FCF000CCEE22FA2AC1F5F4C3EFDA3791EB39B52D
-:10FD00006BA00DC7EDEB16F27608AC4BBDF075C9D4
-:10FD1000F5C8F5C9F20A15E82C467B49DFFB84DCFF
-:10FD20009AB661C2D24C0045CDB623E41733619731
-:10FD30006B023F9A7D39D9E51A03BB9BAF53D8E5D7
-:10FD40006C0FF2ADA4B3683A2A473820133B793BD5
-:10FD50009BB0D7DBE8A7F1018287C433F0473ADFD5
-:10FD6000C70BA5E33E1ED0D1A1283A32E4A7D7198C
-:10FD7000F35F995B7290BF815E0E45C2F7ABA8F34B
-:10FD800023321DEEEE4AFC36CDA3173AA17C3AF39E
-:10FD90002D75D2FAEB082E47B5BA9DF720DF6DE03E
-:10FDA00074FF99C07B83DB57EA267DA5F7437D3539
-:10FDB000727186EA867AA52B1427F2D3D4DAFE85EF
-:10FDC000C88703984EFD4DE9C0DEAA7173F89755B8
-:10FDD0009999059465198C8172AD6CAB1AE4712BFD
-:10FDE000DD5E0C789829F05071DF73960C486756E9
-:10FDF00095733B20C8F905E04A76C0EC154DE457F1
-:10FE0000835F1193DFA41EA8A8379657B215848785
-:10FE1000CA287BE0F792CFBCCC8BF4E8BFCB615310
-:10FE200092CEBF5ED63E6E42719553BB7A907D787E
-:10FE3000CAE3E984F5FC89FC0C8DA2F987E07780A0
-:10FE400013E9A3D6450941B47FF79F01BF0E6D3278
-:10FE5000A77F8805E0D2F2AF6CDA6795F429D75313
-:10FE6000695B41F459C98C7E63293828180F2DDD50
-:10FE70009812C4FD71E8BF5F03DA151BCD64370427
-:10FE8000D8FC740674E65B62267958D6904C7E6B7B
-:10FE9000592DDF4729DB9C1C54B93FBE07E31012E4
-:10FEA0000FFB6B0B2C1984A75C2FEA35D66036D07C
-:10FEB000B7C44FB4DF377B59D3CE744FC7718108B5
-:10FEC000FC1CEA003F8722F1B3250A3F6C610A97C8
-:10FED00033B7BFD603F78D4E55C579D5187E84D478
-:10FEE000432C0B08707038BE569429CE3469DE342A
-:10FEF000C4E7E91583085FD1782AFA692AE183FD0E
-:10FF0000CBC130EE3AA51BBB6D227CBF4DE1FC316D
-:10FF1000A5E6EA22D4D76FBAB99C7917E4936E614B
-:10FF2000EC3D904F3AC8A7F7416E61FE83EA74CA70
-:10FF30007F54EDA1F4E3EADE941E12F6BCE41B202C
-:10FF4000000BDA51EF09FDF89E5BFA4177A4A3E9B3
-:10FF500050F4D3FB834C406BA98159D78CCE66EC0F
-:10FF60005ADDA8EF265F6FD4672D6667613ADA7DA8
-:10FF7000F729B4BF50E61B6EA8CF348F6502FAAFE5
-:10FF8000BD0786BF933DE7B14C047EBF695C8AA183
-:10FF9000FEA4659D0DF9636E0FB71B8BBA19BEDF0A
-:10FFA0005C7289215F7A06803010A9D94578B8C380
-:10FFB000C6847FEDE2714F71BEE49BAA219D7E0352
-:10FFC000F3FDE62D339547E343E275DA6A13F3C395
-:10FFD000D4A6AE86B541BF87EA004FD0EE8BBD0EEA
-:10FFE0008674BC74F3C07786427EFF6633C52FF7F4
-:10FFF000D7A6AC44FB68FFE6D4448C8BFA97AAC220
-:020000021000EC
-:100000008E705A5884BC2AA85D44E74E4A83562F06
-:10001000D90B3B024FC8BC4741BE679C5FF6A84165
-:100020008C5301FEB87FFFB495E2F247C16E738234
-:100030005E38AAB05A4C51B12441F9BF9B5383C8D2
-:10004000CF453FA97A3AD2D3D37162DF45A1FE8E64
-:10005000BFD763FD72A22F4F7D88F8D64AFEC0D469
-:1000600016BE3EA60CE88CF83F9ACCF4649844C5C2
-:10007000FC8FF66980A7593D9BFB85A05D496E28E2
-:10008000F5466877628399CEA160BF4EC857FCD50C
-:10009000BA8ECB11BDD3844B23E119EC87EB9E6262
-:1000A000F265A7027D1D9F11EC47F26C612AF155A4
-:1000B00034DC0F59FC04DF00F28112968F613EE3BD
-:1000C000FB6920D43250CE4C357BD3503F1D5A6152
-:1000D00026BB13F447228E0F9C4C747C48F314E229
-:1000E000BA0F2DCB6528AFE4B8652B54F23B90FED8
-:1000F000A8FE2AD50F3602937A2AB04CF1B34EED02
-:10010000E9E6D7B70FE984EB89B66F65FA15F0AA6F
-:100110003FC25E98BD4DF5A1FFC1F25AB4EB2F8DE1
-:100120005C472DDF5F48E7FDDF21E4FADCAEAFEF8F
-:10013000B39B50AE774B42BFE2D81E95E8EC58D740
-:10014000BAC1E9DDF0B8C8AB837F03F92F8A038712
-:1001500035C83F61F55F930AFDCC31ADC841FFE87A
-:1001600064E3C195C3A1DDF167CC5E1C76F6D3B321
-:10017000BA50DC5DD8D7EDE55628539CF3C9500042
-:100180009E733CF5A4B73D9B61105A7F90FB49429A
-:100190008F3B1F52D096620707399663DC622AB004
-:1001A00047A4DD7DD0CCED8292542EA7A47E5F23A0
-:1001B000F2534D9CAED9CB0AF96DF067D003522EA5
-:1001C000CF49ED4AF5DBF432AB27793503CFB1C027
-:1001D000FAE66EB20683B9D4C6897C3E8BA3873D0E
-:1001E00095EA213936DBF2CC23C843E5AC99E67DAC
-:1001F000DC1C9CD19C8BEDD7D5BAA8BDD94BF15353
-:10020000A14F6CC040288FCA05DF55D429C110F119
-:100210000DD78BD345FF0CF54C84FC6AAF578CFA95
-:1002200064BAD0A3D35954FCB5CEA8DF7C09DCA9AD
-:100230009D0DE3A2BE0CCF0BEC6380D90C7F70E761
-:10024000789AB7E20DC69847396B0DA938EFCD3CC7
-:100250000E1F3DAFE8755CE83C6778278C4ACE8B73
-:1002600018376ADE12DE14C08DC08384FB8C0087D1
-:10027000E78C4685F0F5B9B0CBE08FE2C612EFE52A
-:10028000CC371ECFD7953F04F232374C076D7AFF3B
-:10029000B920ED377CC1EA12ED40F773573F37E9DB
-:1002A000726CB7F63DF22F4A5CA11EA664C65202DC
-:1002B0007B96175D11639F21CA3EF8A5E083B3D7F3
-:1002C000068B76008FE91B543DAE9FA11EB597F6B5
-:1002D000C1CC40C08271C99922DE77BE795662BD19
-:1002E000011732DFD8F6CCFF75DE7B5285FFD4CE06
-:1002F0001EEA11D38F6AB383CEA37F3F3187B251F9
-:10030000FFB6666BA47FBED1BC1FE5BB511FF720B3
-:10031000BFA023F93A43E8E1E9A897213DBCFAF9E7
-:1003200044F4DB3F7FE879DADFB43C333D11EDE2A2
-:10033000C3ABA7AE0C004B1DDE3C95F470F91AA9B7
-:1003400087FD9648FD5EB0BAF4CFBF43FADC144790
-:10035000F1F9193BFCC2EE0679877270359777EC9C
-:10036000212E0FCB515FF5257DD50BEBDD35C3DF9E
-:100370000BE93CE23BE9B1BBA6FA87507BE60CA156
-:10038000DF05923384FA4AEA53A9673593DF9486EE
-:100390007A407DEB83BB61FD5F6E51C9BDAB50D729
-:1003A000E53831EEDF81DCFEF9F036B5C13BF7020E
-:1003B000E05D86F026FB87C3FBC0320EE7832B3857
-:1003C000DC976EEE9688FEED8165DDC8EE39B0B93A
-:1003D00007C17BDA728037D9BD1EA3DDB30CE08D77
-:1003E000763EC21BC62DDBE111F0F672782F137A30
-:1003F00067054FA7B5836BE056942777FDC5EA459F
-:100400007D7E342E948AFEC8D1E75486E70EDAEC5E
-:100410002261BF4838FF9BD53D8176543B7B669572
-:100420009561BC72D60B8E2083FC7125BF1322E030
-:1004300044DDEB89385E78FC363B66705AA41D7348
-:1004400081F899C77C742E7F5EE3EB7BD18E577465
-:10045000EED7CFB3D943C8B7E0EF9C8894E78A07BB
-:10046000651AC649BC361BD24116F3F8C8AE91FBDB
-:100470003F7E86FB3FDFF6F8FAD6F9C4CFAD3D23C9
-:10048000F7492AE343668C2FB53EA710BE2BEEC872
-:100490004FCC67B8BF5445F3B82E8DEB6345D729D1
-:1004A0006E6805BA8987F126A579F8778F93C71109
-:1004B000D7C2B88EF07CA3BF8F47D2437D6E8F1D0D
-:1004C00087AD15E354A826F23BE65AB8FF21CF7753
-:1004D0004C15E553D3B8DF3E2B8D9F9F3889F17DB6
-:1004E000E8F7E4AA04715E7914C533DBE227126EE3
-:1004F0004EEDAB3679857C25E207FBB00DCC739AC7
-:1005000055C47341C562FB5B44FB5BEADEA6FD3567
-:10051000F05C1E47BD3B6581D58BF66B609B95E813
-:10052000EEDE78BE1FC2DC491AF2D1CD42CEDE52D9
-:1005300077BF0FF731A7D425E898C2380126E2A784
-:1005400079B89F9A69A1F86989ADE51974B36F4BC1
-:100550003F78A70D96B6C8C4ED96452E46E7632EA4
-:1005600003B31DE3B17874E46CCAB9E8C7181F9EE1
-:100570008B71DA618C13D65082AB210FF0A5FC9AF7
-:10058000B4D1631FCA62EC9FCC7329E27B2EC206F2
-:10059000E9A13489E200D762BCD885A946743651F6
-:1005A0006301134F9761684DC68FC78B75DF309419
-:1005B000859260BDA1DDCC10BFBE31640AF5023C5E
-:1005C0005CAB859A90AE4D368F19FD015F9132007C
-:1005D000FDE4B98B2F6CBECFA4F968BE734DFC50FF
-:1005E0005FEBDD4A703DC0E9166072A4CF5B35B6A3
-:1005F000431DC0F187F457E9F204A8DEED9CBE6507
-:10060000DC5CE2A93F741F09DF5BC4FCA09F658925
-:10061000D8DE123B7EF4529AF483B9BD3947F0EB31
-:100620001C496F9B8D7CFA31F20BD457D0AE05B8C4
-:10063000DD22D28EE8FD43D1FF8769DCEFDE7191C8
-:10064000E355585988D6BDCD4A7894E35E2BD23D08
-:10065000693CFE26E721E999893894092407D2D11B
-:10066000A1BA1AB29B6646C5815964BC4A8D956F82
-:10067000933FA6B3985A5AA7E17C942BE3BC48D782
-:10068000B758EA7B54D9DBD793FBB125ACD9CCEF73
-:1006900013897896D057A3557B6FF4774A94782FB7
-:1006A000DABF27F31D015312C65BCC84DA12A00710
-:1006B00094CF9FC4F1FDF72949778D47BBB024D172
-:1006C000A2617A1B6B76E4E686ED92A5F930D94CEF
-:1006D000A4B2C0581DF235284F78FE7E3D8BA24350
-:1006E00022BFE44DDCB7B8FE07C03FE5978ED54189
-:1006F0005E9C7C4D94B37BA9FDC925828E03F78F48
-:10070000C5FA271F96E575BCFC3E59FE10CF3F2069
-:10071000FB17F95551E58BA2CA1FE379CBA30F8DC7
-:100720000DA03D2BF6634A8629244F0A059D952C82
-:100730000E117C4B4CAFF274240BE17D89F3D51B79
-:10074000D0C957887A4B751C72A0DEBE3C432F443B
-:10075000BB6340AA3FB913A4B32728010BCAC93D04
-:10076000C19E42AEC73C675D28E8F6B274DE9F8446
-:1007700037F493D929F5E2FB7919E735C8D04FB79B
-:100780009FD3CFF2F6F3E9FB73FA3919D58FB48B07
-:10079000EECDD4C7209CD821B7E1FCDC9CDF7B9355
-:1007A000D0AE62787E0E403F67717DCE40E87FCE4E
-:1007B000B32FE5CC88F0BBE79D31311DECA7CA33E0
-:1007C0008CD22F9A3EB678603EF3B636590AA15EB7
-:1007D00025A40511F39A2BCF8FB2166D62845E1F8C
-:1007E000D7C924CE25AEA2F9CE79F618ED5BCE316D
-:1007F000D51F5E83F19E613CFE16BDBE3CD16E1FCF
-:10080000EE23C7B0DB2776E27AF8AE2C7D02AE731A
-:1008100020CA0C480B6A62EFC3FF49F45712CFE5B8
-:10082000DBD4C10E9BE732DC47F5D7E0BDAE196BD8
-:100830007307601CF786D491B710DC3A8C8BB6F244
-:10084000B868238F8B96B89AEF00E1CD1EE9B4F516
-:100850007E1BF871631F957C062C0B6D8BAC32FFF1
-:10086000E6D8515914E7A2FCDD8FEEB83F00FDEC4D
-:100870008AE7E70CA60CB9341EE5424B6E82C90923
-:10088000F2E25677E923388F2943AE28C4EFF956B0
-:1008900047CF521E5727BAB8D5EDBB1DE905EB630C
-:1008A0005CC36FE1712EFF1B2AC5B9FCFD12FCB1C0
-:1008B000F6A92B3B71BA79A49393D25D8066B43BC1
-:1008C000E43CE4F860A8DCD10CFD1D5A9CD11FEF7C
-:1008D000CF35B8F31F26B888F11BDCFEC59897E327
-:1008E000C372FBE1F70B9D47B5C0C7C3026FBE11D2
-:1008F0002AD323FCC589A3120CF9EBC7A5303D32DE
-:10090000DE7A7D67437E72493743FD9BA75D62288F
-:100910002FB636E7555D84FD5BE970C4A31DF6690B
-:10092000E3BF3FBC05EDBA0DAA5781F5CCDAB6F1AD
-:10093000C3E150EB141E2FA5A0A787E25EC7F15CB0
-:100940001AF29EA66B91FB355FB2663ACF17B11FC4
-:1009500060D87799E3DC41E7097FA9FD9AAD9DC492
-:100960007EC0003C8A8CFAE8038AB3CDB3F3F57CF1
-:10097000F9D27E0BDD0340FD01F43D061BAAC8E75A
-:10098000018A431734ECA7FB56933A71B93C2FEB1D
-:10099000760D2C32560929CAFD42904F49401FCD91
-:1009A0004DECD2AD780E37D741E7262ACE4C642CD9
-:1009B00005E928D0F776A837675911E5E79D89A79B
-:1009C0007EDF559B0BE9BCF58B0AED1714779EB2C1
-:1009D00018ED51ACFF6B18AFF8BFC714217CE66D62
-:1009E000E5E72B8AD57FE6613F73EB8AA87DB1CA24
-:1009F0007629601F8C2DE07AB618753BE4D5C18E40
-:100A0000E5A85F554BA8E79F509E581C244F92CEF7
-:100A1000DC4CE3579EB151FB4F84BC30B7F0798D6D
-:100A20003EE3A3EF12EF073A7535DC0F34A76ED023
-:100A3000CAEC589F51FD6BCEFC8A52B9CE377AFF73
-:100A4000C58D72CC9CFA4D219E277DC3AD38C9DC83
-:100A50008892B7A7AB8624B118F2A86D9C33FC7CB2
-:100A6000B2F50C3FAF7C20433F837C3D7E618B869B
-:100A7000FB37CC6E7322BCC60FEDEF9911C147EA6C
-:100A8000AB3759102FE687DEB3A07EB7425A10511C
-:100A90005E21CFE347C9E39FDAE4F1224AA57E61F4
-:100AA000E937913D7AABBCCF2AF8E40B212F64FBE8
-:100AB00066A471C4E30B56F29FBECFF027A7433F55
-:100AC000CDF96CF216928FCD39B86FF24BCD1FF085
-:100AD0006C53C8BE6FA1F3FAE3877A4CB81F9096A7
-:100AE0002ED7C1F9F57CEB50D3F93ADE55D902EC9B
-:100AF000F7DDABAE6AD6A1BFA67B060E44B92FC701
-:100B0000ED956EE1FD3A5B7F407FAEF2E5040FF2BA
-:100B100075313A4779613B16BE338CFF55BE6C5D2B
-:100B20008FE7682A13C19F85F10B5E890B211D3762
-:100B3000BD12A7A17E782ACBDF0BE153F04AAF515B
-:100B4000E8BFE98D568DE2079DF4DEE9833A9EEF1A
-:100B5000F9E453349D49BEF42FE3FC522AE8B44C27
-:100B6000F09F5FF0D1E9AA4EC487A717C2A4719F76
-:100B700073A172E956B4073C0E3AFF23F9B218FD8F
-:100B80001EF85E7C4932F97F117C477C38F78C93E4
-:100B9000FAAB38E3117CEEA2BCE4B732C12F566148
-:100BA000474C13F43D3CD37F633ACCBFB806F81DE5
-:100BB000C6F12FCEC8433E0AD38BC5897405F49283
-:100BC0003E23826F6A9A6E62687F58DD3EA2976903
-:100BD0009046DA1FD3DBEC0F67611ACC7B7C6DAEDD
-:100BE000E1FE4989C0FF85D2FDD582BECAECA11EB7
-:100BF00068AF9AABE2BC789FEE949BEFCFCCBF8FEF
-:100C0000C36FBED95780F6C3FCC7142F6086EC0AA9
-:100C1000944783F7565922E38D379DE9C73C0087F7
-:100C2000EBCE74A7F48654FF6C8443E99949025EC5
-:100C3000FD7ED63EE0209DC797CC41AB771DEEB33D
-:100C4000C5F955C4EFD16CE67C3022BE84F1308CFE
-:100C50008BC9FD41196FB2E27E6A849EFCB756973C
-:100C600083FE4EBBB853BE711F6D6ED33F079BA072
-:100C7000FC78AE4EF1A729267F2DD2F3EC89C1670F
-:100C8000CD909FF3C0F38918EF96F0ACD7423D505A
-:100C90004FD6031C310E56BF422D0A727B2681EFC0
-:100CA0007F71BA96741C4DDFB3CF74257A3A5D65B7
-:100CB00025BD731AE89545E81DA96FA47C977A476E
-:100CC000D27385C6E556853D89CE5584F5CD041F82
-:100CD000C671596FC5DB8345EA9BF52B8721FD9FC4
-:100CE000747BF1AC4F34FDBF589D4EE76CA41E8958
-:100CF000D637529E4BF92EF5D5DA0CFF8B88F7913B
-:100D00007FFDFEF97FC1A76B34AEB7AED11C443F67
-:100D1000172E37F70BB9B9DF2037E77520F71BD34C
-:100D20002F4EEE3F2DF805EC57B20B51AE47F6F7BC
-:100D30007DC6C87711DF7BD2793CE0979A7747F27E
-:100D40007E4F1BFF5E98BC6F12EB3D9FBC3F22E4C1
-:100D50007DB47CC70B6D28DF4F6EEB43FBD3FB18D4
-:100D6000E803D47B8D099E8D42FE937E884F0A9EB8
-:100D70004BFEDF9535F54807F2FFE8FF45FE4B7A5D
-:100D800094FC22F943F24334FF487E187B3FF87FFE
-:100D900088A777F9FDA90A2DB099F60F3D09FD91B5
-:100DA0002FDBECB6AD0AF1593BBD20F826CC274627
-:100DB0003D21F942F289E48F0AC10FD3A3F861BB48
-:100DC0005AFFE03068579DE1CFC81814E68BB95B35
-:100DD000A2F542877485114336DD5DC590AE2A20A9
-:100DE0008DA42B6B07FC90937171FC60CFB8307AA7
-:100DF000EA9FF1FF9C9EFA67C4A6A70119BFA03D18
-:100E000071BAEAA33CBCCF743A0FE46C6E98DEC6AC
-:100E1000BEC9B8BDD08DDBFDE037D2BC7759B22951
-:100E20009E33F62C3FD72AE952E259DA01D3453CEA
-:100E3000615EA66F52466AD85FB8503C5BDDCD1646
-:100E4000F443A6431AA9FF3BB2776FC9B848BD9FC8
-:100E5000716176E2DC0C7EDFFD17B4137F83F088CE
-:100E6000C62B73BA0C7108D07FD791FD16D2E888D3
-:100E70004C877EC56A0E67995F12D2A4BE4D417D34
-:100E80000BF4B200C7FBB9F4525CC0443C70D738D5
-:100E90007D04E0FD0F22CFDE1A877C3869A82CDFA5
-:100EA000BD42D750EE301947A7B8C8BBAAC807DE65
-:100EB000786B14AC7FEC832C1C6787F2D12392DA19
-:100EC000E2280A0BD77FF4B1D7DF5A4178E6E75E14
-:100ED00098BF45E3FB4C229F077947447E68547EC8
-:100EE0002DAF9FA8B5307E4E31C8F955C5AD374EF0
-:100EF0003FBE087B04305988E709C66F559C180728
-:100F0000B979C449DA8F0DAFFF9FE3303E3BAF5153
-:100F100011F90FDFC2F5DEBC95E7B73DF6AF15015D
-:100F20004DF497467132FA33D72B3A9E7F983B5453
-:100F30000976CD6D0FE76D1946FF06FF34637B869A
-:100F4000E7EF2EA63DE299DA77A5F621EB458C7FF7
-:100F5000E388D8F712DE96FC25E209D43FC0F2BA46
-:100F6000FAD8F7243E10F59B71DF84E0757205D244
-:100F70004FB345C2F3AB1508CFD18CE73F7BECAB49
-:100F80007181BE7CFA7AD4FACF35FFA60CA3BD805E
-:100F90007F1E63FBD0B9E0F77ABBF6827E661AE962
-:100FA0002949F3ED380DFD2481FF8F76F13C5FDC9C
-:100FB0000AB4FFC3F4F11FA28F6619CF6F47FFDF9A
-:100FC0008D1B6527FB47D4FF6105CA379FA9AD3E3E
-:100FD000E707495FD0BE377F9F8DDAFFE7B1EF5754
-:100FE000207C003F544E79ED1CFC501F951F11C50D
-:100FF0003F82FE897F51CE037C7AC49033E9999C6D
-:101000003EBE14E7AA9B47723BB159DC9B1A9AC9B2
-:10101000ED424F2687636F51BF393E020E1178862D
-:10102000BF10FA2111EB2638DDE496EBCE2A1ED74D
-:101030001DDABB78F980CCF4070259E17C747F7922
-:101040009959C5185F0DF79FF936C2F52601B7A16A
-:10105000999DDF0E7079A8205F561081005D6C5558
-:10106000022AFA09481731D6CD32DBF15520AABD44
-:101070006E3E477B4BFBF67A547B66CEBB98F602FE
-:101080006FE3A2F05A1485D75151F912990F1AE45F
-:101090009F948B650DAB96A4B9312EA9D09DCF300E
-:1010A0003DFFAA18E9798E53D2EF2504D7303DF7DA
-:1010B0007D1BE5FFC47A290F2F7D4007BC4D407989
-:1010C000382C9CBF0EE505E5FB15EB4991FAE2B221
-:1010D00007507EDEB84CD6F752FD9B6B657FFDA9AD
-:1010E0005CE291050614135EF384BE080C7C1BCBF6
-:1010F0006737F2F673D6E4BD1DE87E0E7EA88B82BC
-:10110000CBDAA87C20AAFE43E7D12FB551ED1746D4
-:1011100095AF88CAAF8ECA2F33B62F9DA6101F96E3
-:10112000023D2022CEC797F764B6D9A96DFA54B113
-:1011300093DD66E0ABB1353CBF644D7EF1B2BE11CC
-:10114000F9CC82E248BE90F77BAD6E467C61EE4002
-:101150005EFE3AB30379D93B5ADFF2F2CFF09F1922
-:10116000B4BF63B00BB6ABC67C932AE73DE1ED3B61
-:10117000EC11FBA0CC578CFE41C7FB2DE38B474500
-:10118000DA2581E262A44BB94E59BFF0C7B32A8E6B
-:10119000F7A7CCE2E20DB89F3352EC43BA780A7A53
-:1011A0004D45BD5929E23185783E16EBC5877ACC8D
-:1011B0008FB443587D4F5C67D33DFCDE40A006F002
-:1011C00083F135E6B5603CA5292969C193507FFBC1
-:1011D0003DEA02D4A3FB16A4D0B9A43399DC5FD8AE
-:1011E0009ED4256D3AE49B126EB3E0FDE4A67B47E6
-:1011F00053FAAAAA2F6D055E7B694D49B1BD0F96C2
-:1012000027117C5EC89C5CBC08E8BC012FED407BCC
-:10121000BFCB9986F71AD87233E3EFE5789F20BAEF
-:1012200079C0DA1FFDE7D24597D0BE55D9C3130A5E
-:10123000E9DEC21233ED67C01F9D3FF12F1F4DE75E
-:101240009EA6D58A343086D2577EFA4B4D22EEDFE9
-:101250003FAED07D892BBEA97F13DFE5295FD6CDB8
-:101260008BA87919EC7A3C8F7460752FBA2771308E
-:10127000AE8ACE7D427D86F5CB7FF0BC333E0FEB50
-:10128000AB4E3C5A7118BEA33D7CF83E75BD82F34F
-:101290004A74C4E379E9C33F7ADE41BB16CA9D8B29
-:1012A000E1FBE125B3D2D0CE3AAC78121558FF0756
-:1012B0006B6617A767E0FD7AABC0E76C4729ACBF48
-:1012C000D4D4462FA43F6624F3FC0799B38B37C2CE
-:1012D000FC0F3FD68BCE7D8DEBAC7F980970CAC8D2
-:1012E000D23FC2F4A0B877FCCA4F7CBFF01F27CA18
-:1012F000D2305EB75FF0CFCB67CAD2CA22EC9D195D
-:101300005F6A84F7572C9E3B709EAFC4672B743E78
-:101310009BD5A760BC7B9AF03F807E173C1FC3EE35
-:1013200069CC54A9DFA6FB5347205EC3747C37C940
-:101330004FF21B207F6ACD9DA4D70E5917B083288A
-:10134000B7C4F94586AF0D21FF6D8E0BC6E562FC73
-:10135000532FD4C98FA9EF39D111C177A2FEA701AC
-:101360007E3EF753A88FFEDBA781FF7144EE43C892
-:10137000FAE5898E001A13471C0E0DF1B04FAB3EF3
-:101380008CE7FA663C6E26B93FE3F1D485AD286F51
-:10139000805E303E16BDAE2B3B9B793CA2233E0CBB
-:1013A0002C35F2215B7A4E3EB4FF69C939F9B05C45
-:1013B000F829858F9BE99C7AF9208786FB8F231F6C
-:1013C0007F6D23DD5BBD3D6E00DE4F287FDC4AF87C
-:1013D0006A7138024EDC1F4D7468C9906676E6F873
-:1013E0001DDE99F34D81CA34DB004AE95E82DCD709
-:1013F0003BB6E0C147F018E571169C3404E0770A6B
-:101400001106703925EF6545EDF355EC7EDE92CF80
-:10141000CEB1CF779EFD3DBCF18C7C78A1FB7CFDED
-:101420003B8B73AE6DFB7CE69EB88F582EF6F90AA7
-:10143000D6F2F35BE50BF83B1C05293CDE7BA83AB2
-:10144000808FDFE27A034EBC9FFB10D72FE54C095B
-:10145000DAE09F63D6DE4EEF933E2DE44A29BEA329
-:10146000D517F9C59B837EFA8CC7E308AEE54FCC50
-:10147000FAF03168D7B2A8D81DE9178FE96C9670D9
-:1014800065784F57F67364D1EF7290EE0BFE0CFE49
-:101490002DDEF74B66CFDE948B78CAC8C1FD485964
-:1014A000AF7CF13D3D793DF08FC10F2EBD4FE5F78B
-:1014B000A65FB092BE031E4F6711F799A7D5EEB68F
-:1014C00058FA86EF7F1D803C5EA98FB80766417889
-:1014D000C97B49F8973E58D8DB1E921FF4BE70892D
-:1014E00049A1FB4B20B9E8DECF9D9DF97EE1ECCE12
-:1014F000DC8E2DCDF1D2FD978A9556EFE25CDE4F62
-:10150000DBBD6A3CE7646A9E41FB8F7FB3525CA4FB
-:10151000B2364E8F4BE4E722B6F4A573D19A05F7A5
-:101520004D3C5C4EDC29E8AFD233610CD20B94EF1A
-:10153000D5F01C9683CBC38A64F1FE1BB437C13847
-:1015400027F15FDD78BF19FD22C657C477E8C7933E
-:1015500018EE7797892DC3B80BD6EFD30FE19832E9
-:101560006932CEEF1995F81816BF7228DA77CFA82E
-:1015700003D1AF2DBD6F7BE16ACC3FD71F6F2CB07D
-:10158000D267DF277D3147E0BF459C072B833CBEF8
-:10159000AFB6B233D7F77E95C77B560A38493A9033
-:1015A000E515F7F1F350154BAC64BF542CFA88FAEB
-:1015B000AD7034A7A1DCAD78C14CF7985789799705
-:1015C0002DCA1EB117E8AACC9C44EF48CF0D145B7E
-:1015D000303FB74EA17CB85D6A0ED2E917B52F2611
-:1015E00022FD1C8C0BF5403DD47A7B9C17CFE1C9C2
-:1015F00078DB17B53DD6635C669AB3D981F791A6BF
-:10160000DDD1CD85727B9F3364C1F27DF5B926CCE7
-:10161000EB4EE708CCEBDA6594FF429C3BA13FA47C
-:101620001785E379EEE6ED96AE30DEDF047D7CF9DA
-:10163000CCFB3D514F55E434F7447D0274D0B333B5
-:10164000C2F96985F4F0BCCDFC9CBAA48379480743
-:10165000C077B3051DCCDBFAE26F901FE621FE07D1
-:10166000B4A723A0D31DF47DCBBA42C6DBEF403A2A
-:1016700091FA0BF2B56617C6DF441EC6C1FC8B0893
-:10168000CF542A1FC5CB037DF939B7163AB757296E
-:10169000EE2BB6C9A70EF0BC47E0B16C9195E4ED16
-:1016A0001E81E796FB5E48443C7EF9CCF69DB84F20
-:1016B00052B105B4B427065F08B854221C12691D44
-:1016C000645754E2BA13C37068A37FC18F958CAF7F
-:1016D00053AEBB52137090E5A2FD07826EE6320155
-:1016E000B7ADBD38FF097E437EA67776C4FAFC2EDF
-:1016F000E37BE2DF89F51D147A612ED005DECF622F
-:10170000783D51CA0928FAF2B97514F791F892F3A5
-:10171000B66779A4BCD3935D613CB69862BFA77CE1
-:101720005AC06FFF924E390D00B72FC0BFA273038E
-:1017300040AF5AC478926EE478057F9D700DAE1765
-:10174000FA0F61FF72DC7D81040DFBD9C7387F2061
-:101750007DA2FC947C595033E59AFE78EE37F0A5D3
-:10176000A35B5F5C2F1FDF9EC5CF2DEB6827407BFF
-:10177000BD41A1B8F37EE1CFEF5FF2626259049CF4
-:10178000E2B338BD4B3AC33F8C47C9F9EE72F1382A
-:101790006EF4BCA51C92F32EB8F7C66BF0BB9CBFD1
-:1017A000A457499F128E924EE5FDB7687A255A9349
-:1017B000FA5335C87BD28F63B2BEB6F8EDEDBF47A2
-:1017C000E7A51D74509CDF6E4D653C5E5F9BBE239C
-:1017D000F2BE0FFCD923F54E843E59A145E813A96A
-:1017E000FF2BDD3ABDAF322F8B9F2B39CEEA2DF97F
-:1017F000D0EFDCA3CD85899EB0DD79C5372115DF1B
-:101800003599BB959F3F93F09E7B6207D17D85B84C
-:1018100097547ADFFBC54390BEFFCB4CFB31A54B01
-:1018200046D3FDE3591BA70E46FAC1FB0C28CF8F08
-:101830006D1834903FCBE54C9B84F71A363C38E961
-:1018400066F83EAD41F5925C877E905F4BEF1CC819
-:10185000905E0EC6B5140F437BFD6ED589F6FAF087
-:101860008D831662FDE18E2EC9B81E7D430AE57593
-:101870002D89F482B473E5B9BC1A33A787C9599C82
-:101880008FAE6D4B399D15D4D4F4C4FDF3D675716C
-:10189000F49E518945DCE3DCD689FC894A0B5E293C
-:1018A000A47BA16487CDB4305B063FEF6CCB80EFA7
-:1018B000BBCDCD77A2FED87DA7A33F9DAB577F18A8
-:1018C0005CC6ED67BE5F98627C3F48CEE346317EE2
-:1018D000747FB2FD2E71DEF8A098FFB1DAFF9A8412
-:1018E000FAEFD8A61E2E5CF7916D71740EFF48D4E6
-:1018F000BB8C177B4F0BE836EA1ED4627E6F20CB81
-:1019000068BF493A3FEF3DA54FDC51FB01E73E5F21
-:1019100074A29AD17DEA4BC1A7C0F6A3127E7C1EA9
-:10192000CFF5CDA8B33AF13ECB21A47B3ACFA3F2B9
-:101930007BB736CE07879EEB1F44BF71C627FC7E60
-:10194000D18E55F7D2B982E96057E251AA363BF9F8
-:10195000A15593900D4E79FD4B33A0DDA94DFC1C94
-:1019600044BB770B763FBF33F2DD828BB58F2FD42C
-:101970002E96718587B38CF7C0245CA57FF40AE0AE
-:101980007FE880309CBEAA9E4976F1896A3FA527F0
-:1019900095FD2B8723DD3A92E8BCFE3F1A1E54F1D9
-:1019A0009D958AADFD7F40FF76983DC989FCFA552B
-:1019B000F502DAEF3C515D4569F8FDDC20A5576C76
-:1019C0006DA2765F350C6CC47BAE2FDB9384BC8F2D
-:1019D000DED7E178ECE8FEAE5CD7F1BB393EE5BC82
-:1019E0008F6F9A9A88EB6AFA534AE3E588C7842492
-:1019F00027DA77E5E29CC7E1D5DC7E3E6A4B7A7256
-:101A00001C9E0F597B5D1ABE8333BDE9FA49F87DF0
-:101A1000C636C58976BF77DB8444F4433FD75A1274
-:101A2000F15ED3E7ABE57DA820BDD33AAC88D1BE4B
-:101A3000D3B090C63CB97C8B19E9E4F2131ADD3BB4
-:101A4000FD02F7A330EEF1433CC53D98D8679AFEFE
-:101A5000128F97B4F9B1C28F1B2ED6DD8ABFB39116
-:101A60001AFE5E30947F3FB2F6F9F1D8DFB10D6611
-:101A700027CEFBAB0DFC7D86D9E07FE1D594A39BFF
-:101A8000B87F33BB5E217FF8D826D0CFB0AE8ADBDB
-:101A9000CD3ABFAF69A4BF0228C7738D92FE66EB33
-:101AA00041A2EBE8F73392593DDDEBFAA5E8F1707E
-:101AB00096F13C661B1D76847F0127E45BA4438975
-:101AC000E7D9ABF9BEB9ABBE7F3ED293C47BF4BBC2
-:101AD00072351646F71202A6787AFF7782DD6356D2
-:101AE00060FDD7B95B46A1F89C98CDF5B85A60D295
-:101AF000F11E1AABE1F7F3DBC98F2C6E0FD56433FF
-:101B0000EABF73363F2F2CEF63C91416924DEFEFE7
-:101B100025B8FEED812AF6C76BC76B30FF09C35DA0
-:101B20007776F3028A1E5F3E5E03BA9D30D0F5429F
-:101B300057C8A765DFC7F397B9069921BF68D1FDDC
-:101B4000E347E1EFB264EBF1D911E3C87EE1BB23D7
-:101B50001BE6B133C5EFC4B4D2C2EF479D545AFB64
-:101B60002DC80DD77F4F61FBFEA184F32D6646EF94
-:101B7000C074C6F90FEA38BD255BCFE0E31ABF9702
-:101B800031B684CEC705F8FD16F8F3D9D2F0FE11B0
-:101B9000A7A73279DF6599F1BE0BF3F2FB57F21E6E
-:101BA00092BC67D4277C7F6AEDC5DC9F3A6986F5D5
-:101BB00026B5BFCFA634BE4EEF61D504584B1CE10D
-:101BC000C1787FA52281BFD337FF852F772059CDDC
-:101BD00092F60A2ADBC1E1FBFB2C9DEFFBDF29E833
-:101BE000F04835EBDE1D58F9DAE6E6440F4CF6C452
-:101BF000F8504FE46F8FD59F8FF03FB2B6266BBE83
-:101C00001BEF7D5ABDE3A0FED120BF573957D89BAB
-:101C10006C43AAE073357415D4DB95DB87DE6F184F
-:101C20009BCDF5F289DC500EBEA713C8E5FE0DD49E
-:101C3000A3F36B458BC7A462BD13CFDDDB7D3AE018
-:101C4000CD8AEFB7B9286578FFE96A3BBE854CEFCE
-:101C5000BA3195F66983FC9D31A897887ADD3335D2
-:101C60009DC7D1F9BD39892709FF76788129A03D23
-:101C70006AB23133CEBF0F5BEB447D21F123DF31FC
-:101C80009DFF028F9FCC575A6A5330FF8C42E7DF8B
-:101C90008ED8F8BD9EF67A6EA305413D73ED54C310
-:101CA000FB3CF2BDD05F3A0E343F5BC897FEAC7F81
-:101CB000E47BACE5A2ED68B5C483EF49CE4FB5D166
-:101CC000BB1DF31FEF46FA041C6116598FAD4D2161
-:101CD000FA589AAB129C6735307A77A7B82193CE21
-:101CE0002B8E6B70519A78269DBE1F7BF2CD3C2EB9
-:101CF0007F381E8A9FEA44EF47173FD56B24FFD1F8
-:101D00008176EFFFF07793ED36BA473B7F37D74BBD
-:101D1000F36F50293EC9C4FD709F988ECFBE8CE2F0
-:101D2000393E16FB1D589F7C0756379FF31D5809F7
-:101D30005FABC04FF4BBB037EC1E988E7EAA7C1709
-:101D400056BE63D72CEE6D45BF0F7B6F6221BD0F72
-:101D50003B59E77A24FA7D582D10E745FBD69C6560
-:101D6000E7EF35F8A3DF8B6DD170DD9346F0F762B6
-:101D70006F981CF12E02FCCF3CE26B92D3E611ED82
-:101D8000DE0732237D5B7DC6FA5B24FEFBB03EE7B7
-:101D90007C8F37CB42EFBC69F85E35E42789F77852
-:101DA000D18E43FBFC94CEDF95B3C6F37537B3BC3D
-:101DB00074E4FBFFDFDFA13EDFFBD3D1EF4D47BF74
-:101DC000333D70D71F0DF941CD6B0CF587EC5D6F7E
-:101DD00028BFBCE56943F9F0A35B0CF92B5AFF6EF1
-:101DE000A87FD599570DF97CF6A6A17E81ED7D439C
-:101DF0007EB4F37F0CF5C7A41F34945FEDF9C25095
-:101E00003EB6F769E37A34FF59D487C5DEEF0DEDAE
-:101E1000C633CF1FF01DE71BDD267AAF43C911F68D
-:101E2000B5A0BB1FB384DEEECE72507E8D564784C4
-:101E300088EE1A14E2F7683DA67DE1D3311EC75E35
-:101E4000E4F7BF92C0EED322C64BD66DE01086F306
-:101E500029454E433ED5976EA8DF69B2C7509EE133
-:101E6000EF6D28EF3CD36BC867570D35D4EFB24008
-:101E700037E473034586FADD96F90CF91E75930D68
-:101E8000F57BADF61BCAFB04671ACA2FD95465C887
-:101E90005F5ABFC050FFB28680A1BC7F6899A17C09
-:101EA000E0AE3A437E50F36A43FD217B8386F2CB5A
-:101EB0005B3619CA871FAD37E4AF686D30D4BFEA0F
-:101EC0004CC890CF67BB0DF50B6CEF19F2A39D1FAB
-:101ED0001BEA8F49DF6F28BFDA73CC502EED96B125
-:101EE000BDBF367E17764CB1F73F86F68191E27D15
-:101EF000E82D0ABD0F7D5B4E57F9AE684B1CBE8BBB
-:101F000018F051DCC78507FB504EE1BD6B173F173A
-:101F10005342F12337D939A48A3C784E07EC8044E8
-:101F2000F4AE7273D14E4E08DB63596723CEC99D60
-:101F3000CF1EABC86144E76B73FC6539A9E87F3CF1
-:101F40005748EF7BB3C0529C877CE7EE9DA8778D06
-:101F5000657AB5ED288B7CFF78775C5DD68073F869
-:101F6000EF57DB4E307C57B9AD5F11AF50607DF35A
-:101F700023FA5F09FE82D69DB1BA6AE01BB091FEDA
-:101F800058EDA4FC43D5E9947FA4DA43E9EAEADEFC
-:101F900094AEA9F652F9DAEAA1947FA25AA77CB0CE
-:101FA000BA88D2F5D53EFABEA17A32E59F04BF18B1
-:101FB000D34DE02763FA34F8BB58BE19FC5FCC3F21
-:101FC0005B1DA0B4BE7A197DDF525D47F9ADD5AB7C
-:101FD00029FFB7EA20A50DD59B28FD7B753D9537D8
-:101FE000563750FEE5EA10E543D5BB28FF6A753346
-:101FF000E57754EFA5FCCEEA164A77551FA5F48D78
-:10200000EA562A7FABFA0CE56B4DFCF740D6E41894
-:10201000F721645EBEC720EDBFF168BF23710C35A8
-:102020007F65B0DFA3ECE8687C1C1771DDF0FB096D
-:102030003DD7D744F84F4F8AF1E47B0CD1EF2830DD
-:10204000619FCA774FE57B0D33C4BCCA053F0C4284
-:10205000FAEC4DF4F9D6C5F80BD21F1C90EAFF1B21
-:10206000D167B62940FEB09DDF27BE21D5FF52CEF5
-:1020700020DC2F9CBE93C6737A69DFB0D81A4ABDA4
-:10208000318FDEFBA6B85C47E3558A73DF1D96BF30
-:102090007C2C0BEDE9A29F547A67EB1DB3837EDFA6
-:1020A000F02D0197B7724C86F4E354FF9B38CF6F45
-:1020B0001D55B79A60FEDF5E79FB93BFCE0DFBC95D
-:1020C000D7A2AB09FECD04E631D3B942A6BF968BA9
-:1020D0007613185698BF910528BDD5EDDF83FDDC3A
-:1020E000040637E6FDC3AC39B1D6153DAFCF72B8A3
-:1020F0003FFC598EC9905AD3FCFB104EDF3A749ABC
-:10210000D73B978FE989EB92F32A12EF8E8C67AD5C
-:102110004FE0FCBEDDF6F561A55B18FED21FA77B84
-:10212000FD28C76E57C4BB76EDDE11A0F2923B15B9
-:10213000B2CFA6803F83FB43F2DD805355667A0F12
-:102140001EDF19C0FDB353559FDB919CA11EC3FD3B
-:102150008D1A3CA003E53577F3FBF425F82EC60075
-:102160007CB7C0C6FB5DA810DD0D4FCBE5F79FC166
-:10217000DE23FFC9DD4AF7F4804EBE273AB95CA5DD
-:102180007BE7EF98823D15DA4F9E6E51607EE56EDB
-:10219000AFE17703A2E9609EB82F20BF037D99BB12
-:1021A000C0385FBD34A437C5DF5FBEDC83F0AA3121
-:1021B000F1FB43813754F17B4E5C44ABC32FA53810
-:1021C00023D3BC5E8C17158BFB264D2A5B10EBBD11
-:1021D000F05E5D38BEDE49E7EFE7D544EDB374E964
-:1021E000C2E9AA4B174E6FC5AFEEA67784E6EDE2C3
-:1021F000EF1DB2BC96BEB1DEE7AF5CF0469FEE11BC
-:10220000EBA86CD8CFCF57B096BE91E7C975D1AFC8
-:10221000A423D5E2F0AFB347CE8FD30FD0754F8450
-:10222000C3B7C940D7DD88AE0FE3BEE278AB27E97C
-:1022300046057F25807D85EFFBF8FFECA4F341F296
-:102240009CD034E6A3B41CC800E9D8175845EFB9B0
-:10225000CE66F5F47DDED0A9F47BA495AC75543A36
-:10226000C0ED86658B5EC3E7F0AEAB5B351AE3ABC2
-:102270001383A5AF613A61837218FD54E08B215D31
-:10228000301EA2542DC12399376FCE5F825B66E367
-:10229000558E0FF626C707D08DAEBADAAF13F8E029
-:1022A0002A6CFF6DB24EEB50138B0C7C50B298E948
-:1022B0008A3B7CDEBD8D2F86CEF90CB7D498D64AEA
-:1022C000FBE6952F5B5D88E7D98CEBED703C43EA2C
-:1022D0006B46743E87C57BB1DE7141D7C7B319D158
-:1022E000F57185D13D756947B21C7FFA806E61BD7D
-:1022F0007BDC141C9CD88DF4F2249CEFCEF4EB3CD8
-:1023000018079BE3B6D1FBA7C793833951EF7CD065
-:102310007B44328EB5D2CCE34AD1F35286EEE4BF91
-:102320006B616101DC9FC0DF751E8CFC8CEFE628C1
-:10233000F40E740BF2BD79A4CF13ABFF5AD1EFAEFC
-:102340001FB9BF1B80F5E0FDC676E338C538F17CC8
-:102350001CA93FDA7E473A8D19C6FB4D975CC2CF68
-:102360003B0E9DE6BFC8944CF226C3E6BF0BE94E78
-:10237000C675A41FB82BF74877F2D77FA8C942FBD0
-:102380009CDE2140FBFB4A2E97DE317BE8DDDD77CA
-:10239000F273297E2FE5EDB54379FCEB5A19EF1A5C
-:1023A0001115EF8A8AB7B011B1E35F8C79CD386E21
-:1023B0001FF689840FC5595E1DA1197E3FEA55E1BC
-:1023C0007F9E2A72E7219DEFEFA2D23A1353F8BB0A
-:1023D00021AD0E95E86C7BC06BC7DFA3582EE2A43D
-:1023E0002BA2DEBD5E9E37DF89E702AC0EFE9EE5C6
-:1023F0000323E367469E477FAD073FB77463CFFC77
-:1024000077915EFADA8323493DEB9A07E7AF88F5C7
-:102410005CE204789BD0EEF48978A7FC5D9351A42C
-:102420009F259E2F543F3FAD0517C7E37ADD8CF8FB
-:10243000CEB1DA46F253ADD74378343AB5E7C4CDDE
-:10244000843FCDD71BC7691A1CCFEC50FFDB260B8E
-:10245000C5A15E3695FD19CFADB77E6C6578CEA16E
-:10246000DED1594323B7FEC75F8DA2D431BC90BFE4
-:102470003FC912F09DCCFE4EF697FF462489FB61C2
-:10248000F50ADBC51F6BD513F09DB77A133B7D159D
-:10249000CC6B8B7DC0839711A9F9545CE77BDDFD84
-:1024A000AFE03C06B32ACA3F60F1CD5C07E33EE0F3
-:1024B000B2117DCCEAEE7B95CF932D1907F3BBB219
-:1024C00040A1DFAD5B227E97CDE18D37BCB7EB3B02
-:1024D000D393F4C5DB423ED7A6EBCD78B1A343B886
-:1024E00039B556C33B592C8BE273128E91F8720E9C
-:1024F00036E0CB6F8EC4D750C0D7A591F8D2958B5C
-:10250000C1D7935D18CD57D26560A467D5A83CAEFE
-:10251000C76AA896338FCEB7B6A34FCFE67AC86FF7
-:10252000D72E217849FA94F41A834E6FDF8EF23851
-:10253000DBE4C4FDDD7BC7C5937E93742BE9D5D264
-:10254000959FAF02BAF57585748ADD371A654834F0
-:10255000DD62DC2B923E4B3AA463E68CE4D7F1605B
-:102560003F24B9D0DE39BAA13E823E4BAABED6B8CE
-:10257000FC387B55FCE0709CEE7F012DB720EB0012
-:10258000800000001F8B080000000000000BED7DA4
-:102590000D7854D5B5E83E33672633934972924C93
-:1025A00092811038934C424826302480FC552721D4
-:1025B000D0F0EBF05783243A58B4412193026DA335
-:1025C000D77B33908001EC2DA2F5A1F2EC808A68D4
-:1025D000B506A51ADB889320DC685107B52DB6DA5D
-:1025E00006DBCF9FB64A10AF175B5AEE5A6BEF93DC
-:1025F000CC994C10ED7D7DDFD7F7A27C3BFBEC7DC9
-:10260000F6CFDAEB7FAD7DB268A6C4DEB130FAB9A1
-:1026100000FFFCF0EF9D62F81D7F5CF85456DED59C
-:10262000DA8DE2F915434BE8C7DE2D1EEC675AB68A
-:10263000A9981918DBDAE264CCCC58BBE4F5E5C004
-:102640007872D3A90DF87C8B0C1D1D8C853CE6F0AF
-:1026500043388FEC2FF6A70C8E975554E550B318DE
-:102660004BB9EC4FC93740BF4FB30D2A93E03DF54E
-:10267000BA276C93E0BD93C90CDF4BCD8C363C0080
-:10268000EDFD6F8E65FB60984FD704C62876C6B601
-:10269000B5C03EDCB89A708E612A967D39062796C1
-:1026A000AA939701277FCE447B98EA7B5CF98C4DF7
-:1026B000C6BA4FF4EFA3FEDBCC3B2D369CC7655169
-:1026C000F64983EBBCC2C89A3A60BED92A6C0AD6D6
-:1026D000CBCEB7AA8B53B02E51FDCE96DDFEDFBB1D
-:1026E000713D612A33178459A08C315B71480D41CB
-:1026F0003FCB6616C0F7E3E179BF4BA675587AEE7B
-:10270000612AF4CB747BA500F4732C80F13438C3B8
-:10271000BF45008AB472E8B78FF9D824848F2D1C86
-:1027200092868EB728ABAA574E1DFEFC16C5E10156
-:102730001378A09DA7E56FC64087076B4E03CB6655
-:102740006C23F65519ABCE875F70DE66F3DE2498F6
-:10275000F75A359DF6FD89A32A8D79869FEF7E383D
-:102760009F501140BDC542E5BE168585004F1E0431
-:102770007CC1FAFE1695CA032DC5543EDAE2A5F6D1
-:10278000C75AA652FD472D3EAA77B4D450FDC916AC
-:102790003FD50FB5D452FDE99600959D2D0D54FE01
-:1027A000A4A589DABB5A9AA97E45129C1BEEA738CC
-:1027B000E45C02E7D17EB3D9A7027CEEC67304B80D
-:1027C0001FF1E5677AE1BCADC5069604DDACC777BD
-:1027D00031DC8FD569F085E11CB63A77B1AF43693A
-:1027E0009A92D22EA5C1FE1FB7B74B13A05DBE9320
-:1027F000A9F0FC7E29D4C0BC8CFD6B78865F9EC698
-:1028000098DBF9CDAA0CA8B7862B775A006F8BD42A
-:10281000C5B59B62EA6A4AF98D0795C1FA18CF5E81
-:10282000D906EDED6AF54E87C4D7C14632B62B3CCA
-:10283000C7BF09F02892CF4208F77E97398CF8B8C5
-:102840001ACF4BC6F52BB4FEF9ACD56980F58F5184
-:10285000CDE54837D03FC21C97DEFF6E55A5E7F1A6
-:10286000EF5DAC9F61D225F563C68B8C87EDD245B9
-:10287000C6B1484B2D5158FB0E93E01F5976E21F0D
-:10288000ED2676AD1FE0DE6EE5E5699744F3F5BA17
-:10289000AAAE724179958B9F6BBB35A454E1FC6560
-:1028A000062FF20BD6EC7A3D1FE6FBF64B32DBAE81
-:1028B0000EE2E7E3829E0BC7A4F8701EF62F967017
-:1028C00021CCF3D5318FB76540BDF001AFD708FDFE
-:1028D0007730AF0DF12474BB813D04F51F4E2AC83B
-:1028E000580CDD4B27FF382300F8922CD61166AC2C
-:1028F00006F16DD3961BC6F441F9E909CEA7BAC417
-:102900003C7B4DD1263ACFC97686FB666C6732F2A6
-:102910009D4D4E38A4CB18338CE0A5D9A45C8DFD19
-:10292000CC5BCC2C04EB31FFF5328B1FC66B3D9793
-:1029300054837C84B16832F231B335A0A4C3F39DD3
-:102940002103F18556D51E9660DC1DF6F25E15F961
-:10295000A762F016221C3D0682639BFD6B6123F289
-:10296000676953032B80F52A4F5A5CF03CEC312801
-:1029700048E761DF921AAC8702B2B750150C02DB50
-:102980000319E1ED382EEBFFD9046CAF635E84C30D
-:1029900096EC3FF72443BD75B9E235F2DEAA3C85DB
-:1029A000B111F81B4CD96AEADB9C8CEB58C1FBC314
-:1029B0006FDEC54087A949FCFCBED73D57C92F2310
-:1029C000B912EAE37C49BA0084289BBC162FB48F65
-:1029D000B797D7F8A09453CA2D2AECB34D29B7ACBA
-:1029E000A2FD333B83793219E74FAD8AA1262CDA59
-:1029F000BFEE2131F5827B0A9112B5B7D9777523E5
-:102A00003CE4EB1973A9B83E984FE37B000F4BC130
-:102A1000CC5E15F6D17E4306ED4396BC5467D7CB0A
-:102A2000B4EE91AA2DC2C6039F372FEC65C03F4676
-:102A30005A6E5A80F5110DF2EFFB62F8744E405F4A
-:102A4000CFAAD5D73319D42D31F30ABC89875B3C83
-:102A50003C46286D2770FD2302323D8C5FFF3DCA46
-:102A60005DE9950CD769A77566DBAFAB040801CAB1
-:102A7000F93721FEFDBDEB1CAF2CB1B860FEF10EA5
-:102A80000382934D60FD9B71DC1D02DFDB5DFC3C2E
-:102A900007E9CAA8D1A50FE9724CB3818562E48E1B
-:102AA0002B6463A198F90ADA3374F5C29D2375FD8E
-:102AB000C7EECED7B58F0B97E8DA4B0F94EBEA65EC
-:102AC0001DD375FD277456E9EA1323F374FD2B7AA1
-:102AD00097E8EA93A357EBFA5F76F23A5DFBB4BE50
-:102AE0001B75ED33DE5FAFAB7FA5FF165D7F20E387
-:102AF000868E047272BA8BF38536A72FEA4B20CFED
-:102B000007F42E45EE1F380FE09D494EC0EC98F9B2
-:102B100052BC3640A6C13A63A3947793459DE47AAC
-:102B2000ABBA19F139D54CF82CA33C87FAFA9BCDF6
-:102B3000E124C4C3CBBD2AF217AF8BEB336F17F977
-:102B4000BE8AE756996A21B920DB793FD93E87F4DE
-:102B500094D1BB812F55A0D6C806DA93913FB78494
-:102B6000FC6EF7E0BAADCA4E86F45B995AC3FAEC34
-:102B700083EFCB8A8F0552703E95E6B32821EA6732
-:102B800055E1FD987D1D3618981DF97837C809184C
-:102B9000BF23255746FAEBF86B4935952933E620D4
-:102BA000BE4F54D8034F40FF0E89F532D0933A0CF4
-:102BB000EC2CE86CEC497BF99D20AE8135FA8DC890
-:102BC000EFA6B0262A471B980DCBBD52DF0606FDA7
-:102BD0003C4D27AA72A0DF0977600DEEFBBBA04336
-:102BE000E0BEBE3B9EEB595BB2E7A9A897B5BB3AE6
-:102BF0007AF3713D592057901064BF17F50A6DBFE5
-:102C0000778AF394F3DBFB50FEAD4FB7A8A82FC92A
-:102C1000969DFEDF03BCEE37F53DD20AF5364959E5
-:102C2000DB817CF166BBF72186FA23879B9A62A839
-:102C3000D80CE3766CF2C9E9D0DEB18D79DB903E39
-:102C40001C959BD3E179E1A855860CA407F7A6CD86
-:102C5000586E413D16E61BE7D96BC884F6D24995FC
-:102C6000B50C65AF02F3650E8F4FC6D4DD0CF7C30C
-:102C7000DCF2BB8857A8755F80A55766C079C3BCD6
-:102C8000563C6F894A8283F59C3D6CC5BA9BC3C58F
-:102C9000EA93C2C95077B87D92CF83EFEDA6F3B522
-:102CA00046F47AEC1A77E04E84A76381FE5C65CB2C
-:102CB0005DB4BE1D064E17EDE9EA7194CFED2E7797
-:102CC00046AB3AB84E8DAFDC2FE4A7F65CE32B0A97
-:102CD000DA145983FA0DE0F96E4301EA673B19F201
-:102CE00027EBAD3B19E2B55509A90CF5F07F0B11A7
-:102CF0009E6BFAED064133D5F9B51694D7671DE5FD
-:102D0000A4CF5A9BF7D379C5C3CDDA6760BE8BC019
-:102D100035B5E85E92EFC080D542804F4FB6BD61B9
-:102D20006F02BD7FAAB01BB6011947495EF92DC8D5
-:102D3000AF4DC2CE004C30A07C3BAB30925FACC3F9
-:102D400045F50DE9BCAE8DB321AB3CE762FAB77532
-:102D5000B7850562F6B10DE641B86C39BFB806E13A
-:102D6000CA64220EB6E3AF9EBDDB1196C2AE992AAD
-:102D7000E03D1BE706B88E3633B20BBC8E053548F6
-:102D800077FE73F9247CFFE4CAA07EDE103336D1CF
-:102D9000BA4D9A5C325C98406B55CD9A1C26D596FC
-:102DA000CB2DF8BFFB82847C3F468EF182E4BA26AD
-:102DB000B70B77EADBC7EED6D7C78587BCFF06CA55
-:102DC000FDE5FC77900BFAF67B85FC5E8EF21B4AE4
-:102DD000B6CC4472CF022BBAC0E5EEA01C04BE9064
-:102DE000D711A944363A6A638C3C64B40F9D7C5C6D
-:102DF000E3E67CCCDF2B9BF01CFDE7C0F8A818CAEB
-:102E00009747277178F79853C29BE1BDDBC12E0A23
-:102E10001471FB3900A4F65DD9FBCB3AB4B37A8DBB
-:102E20005EC0D881738A3FD715F91C7F7A5DFEBFDB
-:102E3000BA487FE8AB40BB1AE70BC4CCD7634B1D45
-:102E4000CFC06E79B92860CC877E1FD73826217F06
-:102E5000481AC54C489F383F2B1AB4DFAF12F4B460
-:102E6000C3FB5AD31158C76D2793501D67B38DC745
-:102E70007B5BA0BE3E4F267EA65CB6F60768275752
-:102E8000FD1ADAE19DDB543587F4F45E13D9EB5576
-:102E9000028FAB84FD75B4D044E3E68A75E78812EF
-:102EA000DEB071FB3B62437DB6F400F062FD792633
-:102EB000F3761FE9BB651DF1ED3E86745C22F005DB
-:102EC000EAF64AA84F14F50E26652A708E136AFB9F
-:102ED0007AD094F0BC78D4867878D0CAF5B7470514
-:102EE0003E6433C91B81F5671FB07BC3D02FC5C8B3
-:102EF0000E46611FDE17E47762CF7D7C97BEEE61E0
-:102F0000317517AE435FBF5D6D92102EB7D7818EBE
-:102F10000E5BAEC84F71BC5BCA10E645885FB38DCF
-:102F2000F689684FADAFB433846BD2A9B1FF2B8A59
-:102F3000FCE38491A15C5092D53BAAE17DE56799C1
-:102F4000DE4DEAE0F93FDA82AC1BF8DE052F6B03B9
-:102F50009EFCDD2A5B03EABF8FC179A21CF911D860
-:102F6000D9D8DE01E78AF527C1CEC6F210D8D9F844
-:102F7000FC69B0B3B1DE097636963F013B1B9F7703
-:102F8000819D8DF5AB8A2ABF8AF8526FF7CF9610D4
-:102F9000AE3E595580AEA44138931F48627DD2059C
-:102FA00020903A85F525015CCF8DE17490841E2632
-:102FB000E0C32CE0B5205E7EFE383E6D9C8029D1BA
-:102FC0003853611CB2132C0AFA45F2E18D3478FEB5
-:102FD000E1CDBFDA8FF262A11458910FFDD74D7E7B
-:102FE000C7CCF5E77E33F6DF6305FC073E344AD0F5
-:102FF00041A80AE08972F725A3B7157A5D3EEBD4A4
-:10300000862CB0BF6FDA377931DAEF97DF74AA62B6
-:1030100034D40FEE0B2F964119BFFCE1534FE5025C
-:103020000FCE796015AFDF79EAEC28684F0BED58C9
-:103030005C3D0DFD525C3EED91586DAC7ED72CF0A1
-:103040003BD8BC8BE41CF077867068CDF6937C3C53
-:10305000EDE84F5D05FD8359FDD9D75D847F079B62
-:10306000EF2639D49AFA07D23F5A07E48597E485C8
-:1030700036AF262F3E16B8A7C98BF5565E1DE8174A
-:1030800028A0E7770ABF0E0B17523DD3CAEBFF5EAD
-:10309000A5BE8A760FC087ECDC23A925DF9B897645
-:1030A000658DEC4D82FA9DF6722BCA9B07F3B9DD54
-:1030B00002E386D08E0FCDB6841FC24375A8448F1D
-:1030C00019DAF80E372A5D2C43ACE385E9B608DA45
-:1030D000F9ADD5967DA84FEEB2E7D378AD53CD21AB
-:1030E000F4AF68F5CDD3A75B509F484FCD70615DBD
-:1030F000E34FDB01EFB1841F238E5B25B65B65B127
-:10310000478CC8CF2DA63FC5EAC9761625FCF11A13
-:10311000C020413E50C0F1AA82796BF1B9596A0AC8
-:103120002132EEC1B5E33E52849F92E5F2756BFB0E
-:10313000F0E5F27D69FB483187C43E484FDA6537D8
-:103140004450DFDB05FBC2F176E7AB049FF87D312D
-:1031500074BDC2B8B3A68A752B330FE13A661B7CE7
-:103160006DF8DED1CFEA1C805E6C0E6B92F17901B6
-:1031700058B4E89705946EBB7011BD23DE2F7BF920
-:10318000EF24DA0FBBC94CE7F24C215FCFBDE6B0AC
-:103190008B91811B1EB1246578FC7D6308FEFA18B3
-:1031A000D2536B868FE3AFD29FBA09F137BD3F7B15
-:1031B00033ED2B92F03CE2F138FE7C7E0BFF841C59
-:1031C00030227C3FEF3CB573D4F0205E7E4D28501A
-:1031D000B4F375D23E7DC59C0E343D8A819D9332F9
-:1031E000147E5B613CB568B06E76FA493F3639BCF7
-:1031F000C5E8BF6DFD9BB12191FF36AD80D3C1A65F
-:10320000541BE9CDADA95C6FEE4E9DA7B377AAC163
-:10321000FE91003F8C99AC03E9C8987635F9BF8CD4
-:1032200039A821E1BAE2F4D1B4055C1F55401F4D25
-:1032300030AF56CAA88F26D05307F4D18C795C1FC3
-:103240004D35933EBA27C55CBB3701BF792F9FEB45
-:103250007BDDB88F04F61ED879E487D4EC3CB3123A
-:10326000207B4DDBE77BF99CAEB4FE494A1343BF9C
-:1032700098D1EC5551DF34DAB8FE9804DB2C8E91EE
-:10328000DFDAFCEFE49B088E3D45FCFC0C16AE9F9C
-:103290005CFEAAD49408EE6A81A63F24C6BBBF0395
-:1032A0006F882F94DBCD3ED40FCAEDCE2AD40F8683
-:1032B0007B0F4CCDD0FB19837CC5FBB72946923FD1
-:1032C000B2D78978D661EA7BEA55B4E38EDA49DE73
-:1032D00074A48CAA8AD59FC15E0D15C32007FF0276
-:1032E0009468186AA782FD34BD00C6ED599F3D89D8
-:1032F0008F0B7A5ED950BD32DE1F3040EFA9FB5DE7
-:10330000FCBDF0087C4F5A3F3507F12A9EDEB532EE
-:10331000CFF952DE6A5857DE885E2AB5E7FF9B195F
-:10332000C9BF16DF7FF1C03970B93C0E264B33920E
-:103330003C5E8CEBFE70E36BD95E584AA37C86E45E
-:10334000F2C74D53D36E5339BF3D8072E69B32F1C5
-:10335000DB516BBAD33362CEF9DE96CE3CD98D7198
-:1033600083685EB59BEC015FA2F5FEABA03F16192A
-:1033700043FCD924F0407544E78E05B8AB7683173B
-:103380005DD2207C757CA0524EAF5660FEBC16E626
-:10339000B543DDC514F267E55D3012BEE51D594148
-:1033A000783CC6D12F853C31F3202B8E898B7CD283
-:1033B000544DF499973360C751FCE013476431D200
-:1033C000F72777F115E53DA06F07194BFEE61B3691
-:1033D000DAC2680A8EB95531603DEF07121BE5C2AB
-:1033E000751C71DD86FE9A6792C95F63DCED267FEE
-:1033F000CB0FA4C0F505B08E0FC3EAB7D1CEA51F81
-:10340000E8B7EE3BB67DDB498E45E7921CFB968123
-:103410003D94C09FD456C0FDE35B04BEE7395FC94D
-:103420005B5D81E5713AEF4BA5A783C8B7619CDB73
-:10343000D27652BC2B54C58AD1FE6B37015E25A0D3
-:10344000D73305226EA6F163013F2B5A2BB00FA391
-:1034500024F4BC038F3EFA6836CA6D864ADE00DD6E
-:1034600069E32417775063B2D7C7D0EF20293ECE47
-:103470006795903384F19DBF1A13E27544E3D3AE90
-:10348000AD4EEC5FEDF63A910EBA5D539CD701FC60
-:10349000EC76334B8AE1C31A9EBC903285F4106DF2
-:1034A0009CF529F917B5B7CDC08FD58BC86933FA0C
-:1034B000BD519FE999665161BD5BEDE551D4B7B649
-:1034C000DA1DE5E43FB703DF88F127D9EDC7080F20
-:1034D000ED5EEE67B323FF457F92D87FB7EB18ED23
-:1034E0005FEBB7A780D3BDDD1BE1F147B066B09FAE
-:1034F00055F687D0CEB03A18D995560BA7A76438A1
-:103500000E4B0C1FD1E6FD7E01B7D7B68E2A8F5623
-:10351000D2FA64F408B0ADCE7227C9438433EAA36B
-:103520002306F451F29BBC2EF881364E6B37DFA791
-:10353000BFD9E9ABCE443BD4FF22F285ADF6EB2CEC
-:1035400021940B29932E3ADEDBE2DC868ED73C4BAE
-:103550008CF73AD28331A55CC1F14CC82712E0DF69
-:103560001FC4BABEAC5F0C20AA90DDC6B87E051899
-:10357000EF4CA44768A545F8B786BEC7F9A44BD859
-:103580002FC0273FC5F5AF1BF5CEB14AEAC5ED9672
-:103590008CB972B10CE7F5319CA0511AB4E3E3F594
-:1035A000994A633FC9354D1E69F2E95ED467CC8301
-:1035B000F4A4F95F721BFC24B725879FF006F41B67
-:1035C00015E9C68871DF04709BEEE6709352A7AAD6
-:1035D000482FD5E7FB72F1BDC329EFE7B2183F9A38
-:1035E000C60F5FF86CBF15DB3F69A8BAA8DEA2C59D
-:1035F00085878B07A7DEF2876FC6EA2DC3C5873F95
-:103600002F2EDC936A26FFDBFD929E2F4D72733EB8
-:1036100038C1ADC50F0363DD59D8CFEF25BD51F8D3
-:1036200053DE2E0A94B8D1FFD56E662138CFC39FE2
-:103630004D71227E5C2A7C35FFF948A14F8DB4EF95
-:1036400097904E47368425F47FE7367448BE8BF456
-:10365000330ABF92D6DF24C6BF42EE37A2BCBA42BD
-:10366000D071EE399915C7E8817F2BE0FA9449E8CB
-:10367000EFA93D8F5871BC1E83BFBD08E543AA4129
-:103680007D2886DE4D6BCA2D5531F069C5B84E8256
-:10369000F3AB730FE85D641F69F2D6A4C90987AC68
-:1036A0009313C1648EB79ABE139CCEED21490A2CA8
-:1036B00047B89E9EFE8745C8B24E4B1D668C7F7FE5
-:1036C0005E5C6340AF31845769760CD28B57567E6F
-:1036D000DA07EF4F7CB892E861320B507919E37A40
-:1036E0001FE8515FC7F92A70C931E7CBD0F590FDCB
-:1036F000F9FBB812FDDE59E89F8B92FFF4BBE7257A
-:10370000E2E3F1F0D93F009F81F89DCE0F9A2BE4C0
-:103710005AAE6857D10FEAC27894DE4F59D1ABAF99
-:103720004F8EEAEB979D8CF37B867C3F7767F3782F
-:103730003F0EBA07E80AF9C16A11A71C150A572AF1
-:10374000B0DE3CD641F1C0DC860C1D5C2F378A3CD4
-:1037500009E69398B64EF8C995177E80EFDFE7D655
-:10376000F49F10E9593788F66F54AFFE761BDACE16
-:103770003B4DE40FB5C0E408AF6FCC5D321BCF7595
-:10378000883FB549EF47CD8D6D0738DCB0C7A46BD6
-:10379000F7FB26921DB054F86907F68BEBC8E2FBE5
-:1037A000CD2D1F3AFFE7CF0BFF3286CEAF8D7B2F9B
-:1037B000F01BE4A3EC3C9CEB14841B438F03CB93E2
-:1037C0002312C6A54736311FEAC3B91B992F917F33
-:1037D000FF6501AF7838B3D01504BF59E2D948BBB3
-:1037E00091ECF4911B0DA4078E047E807C60D15A6D
-:1037F0002017A8E7AE55498FBCB2C1C0500EB0F338
-:103800002DBAF761B9E4EFD4CEFD5E1C0FF5C87593
-:103810002C6CC0FD3495103DD1BAF207F101E0F5F2
-:103820000E879785E3F75493CEAF99877ECC18B86F
-:103830006878901BF7BCD1CDE32E1A5D803C7BD914
-:103840004D78C2E55C21CA3958D287D34EEEEF805D
-:10385000F55DBE99D17EFBD36D619EFF30102F3098
-:103860005E180BFCC932AB18FD2A3B149B01F31404
-:103870000EA7F7DDC7D219FB2DA8BFD533197BDE04
-:10388000D65F2A41FD8F0FFECBAE763894C3D6FEAD
-:103890001FA2B3D77EFBE6253531F5D47FBF9BEA67
-:1038A0006C2A5365808F0D67807DDA9479078C30A0
-:1038B000BFCD632727A48D0DD029EDA76DBA7A3B24
-:1038C000E679B4151A484F62B1EDB08FDA4245D0AF
-:1038D000B78FF2D8580D8FDBC78E2F3B2E32FE3CB0
-:1038E000187FD21718DFC2D79F8D8F40BE64E3FACE
-:1038F000D14F8DE3E3F9A2B328767E319ECC427B93
-:1039000031BE02F3D9253E9F827924D94C9F3730AE
-:10391000309F02F395FD03F6533BF43C4C173B8F6D
-:10392000ABBFD879B4197CB4DED0783BD93F0C9AC0
-:103930000D53D0CEE0F35965F6825CCEE1DA366500
-:1039400010AEA0EFD1B8D07DD305016713C25931B5
-:10395000139C87835B8FC2F398B629B6F026D7FFF6
-:1039600085F372F2F38A9D0FF5C64B9EEF6A98CFEE
-:1039700071E9F3217C917E06E00B67B239FBD2E15D
-:103980000BAB0A5D0A7C7B605C430C5C07F385EE45
-:103990005150FFB79AFC162FF0DFEB0B791EA2C730
-:1039A000B1C442F903594B2C9897B7C563AFC1FC1A
-:1039B000BD2DEE6516538C9CDEE2A9A376E84F7907
-:1039C0004E9E880DDD13AC8C45C9FEDF36B3DAB9E7
-:1039D0000AF1A789E74D6979449A3C64223E49FB84
-:1039E0008217D3BE72A8BF07FA6F6B9A44796269D7
-:1039F000E97FA6FCA81D0D5E2FB6DF67E571C6BB8B
-:103A0000459C091195FC68E3A73F80F1D6F2C2F509
-:103A100012C517D75E3CBE587E265A8579566C155E
-:103A2000CFA372D6C971F2504FB73B10AE3CDF291D
-:103A30002C71F8EAC6BBAF308BC79FDDFB18DA7775
-:103A40004FC158463D7D1930EF289E1E65B34FA9E2
-:103A500044BD7CBD81D6918BA17C1071E5650B9C2A
-:103A6000ABE0F9A8EB65AF04CF733CB752FE116829
-:103A7000F5A46F783CC7ABB03E649FABF5FB88DF25
-:103A800057FCBA417091BCD1CEABFC8C3719EDA874
-:103A9000F2C225941F463F1ABD1BE3F69389F6AF89
-:103AA000C16705396673C7EC8BE9FA093BED7FB650
-:103AB000BE0D9109E5627CFCEBDFFCB4CE24E6B5DB
-:103AC00098E9BD3AB217B5B8DA48A41D3CF7D18CD5
-:103AD000C725E2DF9FC2DF674E1E674BB281E9094F
-:103AE000F427DD6823FF655212D4E17C2433B38CC4
-:103AF00080E7F70ABFDF2689C9581F9C2FC270BE16
-:103B000056C9BFD3EBC292DB4BA6743FE517629850
-:103B100036D6EEECC1BC0D685FBFC695837EBB3464
-:103B2000208828DACD222EA5F949520BFA56A2FC9C
-:103B30007EFDA1BF2CB1A07C46C7D274D0BE0B3F86
-:103B4000DD159A39489749E7463235C67E49929B3A
-:103B5000287F23E9DC689D3F2522EC2EADEE73C85B
-:103B6000D538DF7FA15D00F85CC994367CAF128048
-:103B7000A2C6FA47CF3975E30C8E3F4A376F04EC83
-:103B8000E7D838C0F0E32733B53876FCFC61C62FA0
-:103B90008A1B5F4938FEE0B899BA71B7C89C5F8448
-:103BA0001CB670227F5E5651D57924E5E1F2CB1C1C
-:103BB00045DCCE057E2C53DC49E0CD6DCE26CA37E0
-:103BC00033DA787CD424E22547521A785EC4287D03
-:103BD000BE591553646CDF923AA75782F62ABB5E32
-:103BE0004FBFE2FC3B46E43B57C87A3DDDC79A082D
-:103BF0003F2F67FAE7A6517A3E7010E903FDFE29D0
-:103C000093A294979665A73C83E1FC076FB530CAF1
-:103C1000973225FB9B50C695ED4FCBDCE2847A1A98
-:103C2000C7AF19FBDD4BD11FF496C0E32D40F70859
-:103C3000C7BAF5397B8D31E3D69923852847EA0C3D
-:103C40003C3F9F7E60FEB7B246923F357E5ECAF033
-:103C50008DF147D537497E77CC3EDE12743130DFA7
-:103C600086DCBDA8C70ECC9714994CF30DE4F988F7
-:103C7000F9B2BFDC7C6F0B7AD6E6ABFFB67E7FF580
-:103C8000E628EDAFDEC0445E3F9FEF6DDC9FEB4B5F
-:103C9000CC27F2B506E6FB8E7E7FF54951DA5FFD53
-:103CA000803D29E6CBFE72F325999B281E7387C4BD
-:103CB000CF754351D99DE88F3FBB60BD8AF8A6D927
-:103CC000678BF005C0B345229FE9CA5166D21BB489
-:103CD000710FB44C653E33F7DB60593C53A2FCFED8
-:103CE0007153251FC6C3F600DDFB8AD02FA5507B7C
-:103CF000B8C549E5BE1695CA07C11EF4917FCACB67
-:103D0000EB45DCCEBF6384B26235EA0B95369EDFAD
-:103D10003C730668A283F61618603D56CC23FC1A45
-:103D20009BB81D6A45BB393C1CD5D9613C27DBC417
-:103D300017A22D504F9A6654316F3BC9C5FC89FCC0
-:103D40002E3F28E2FED8DBB47CF8AF483CDE0EFA0A
-:103D50004825ECFF5A016A665C20A15E75E577D2C2
-:103D6000491FA95BD697A2C03AAE9126FEDC0DF0A2
-:103D7000F8ADD047AE1DCDE938DE9E74A0649984BD
-:103D8000F97AC670187E5D9AB294ECD1A5CB19CBA6
-:103D900080F7AFC4F740AEBC2AF49957FA9218DA0C
-:103DA0006BA16A1E67BEE656BD1D798735A2A01EAF
-:103DB00077C74407C3F3A8DBA86FBF4DC40B96C6F3
-:103DC000D99557C6E5D180964978823C814D83F3D9
-:103DD0002A4A71507EABC8A3B9BA48E57C6E948379
-:103DE00092A833E6BAD330FE98644E7CEF461BEFC0
-:103DF000A8E03BCCE12338687967CCF8D8447A5FF7
-:103E0000CCA7BD77AFF4D8888BF935416F7BB7AFBE
-:103E100098CB67D4AF0FC6ADF3EC82FCEF55B3443B
-:103E200078DB2FA35F415BFFFF297CBD097D1AB0C2
-:103E3000EF57677D3289E22D6C14ED7B91863F222E
-:103E40009F6AE9405D66724C3E1D73F67BF0BCDFF5
-:103E5000F84AB2773BE19FD01F226F1A2E247FF1E0
-:103E6000F106D6E1F4E5717F5CB542F94062BCE150
-:103E7000E01C9FEFA0F96DE82726DFB0752FCF7704
-:103E80001CE9A8FA00EF45E1F3777478A5BFFFD4E9
-:103E9000DAFD8884F6C57D789F4B1E9C0FFDB4210A
-:103EA000D25FF5F7B2E2D7A5DDB7D1D6D36A66C542
-:103EB000648F1A803FC07C0BED7DB2A4A2DFBD5F92
-:103EC00046FC2A19CBFD449813CCEFB9703DCF982E
-:103ED0006BE0F91B6354AEF7B9FB47C7C685D2C682
-:103EE000F278DAC2E4D736AA20FF4C0F6F5E8AF967
-:103EF0004B0BD35EDBE882BAE5E1565ECF7DED1376
-:103F000017E86CB687DB78BDF4B54FF2A16E7F7809
-:103F1000CB52CC675A38831150521FDE4AF2326DB1
-:103F2000AC664F4747E17C0B254E1F5FB634261920
-:103F300012C6EF9D63353F2933E13CFEAEFF388961
-:103F4000FCC8AFF95F7DFA7823C3A66CBC27247E3A
-:103F50001CA9A4CFCCC3DF019EF3E54837BE6FB0E8
-:103F60004408AE63316FA69850E0AE0B17C98F8836
-:103F7000C72309D0B519F565556175A01FB736B3CC
-:103F800080B52006CF994FE039CFE3D1D6A3CD3FFE
-:103F9000645D70A47246ECBAF6D038DABA4E4F4C73
-:103FA0000AE17D322D7EAAADEBB4D47F3F3A23BE29
-:103FB000F9C3CEE5786EA753FA474B503FF1F0FBBB
-:103FC000748EA7B3FAEF97BC3175133FC7CB1FFEB2
-:103FD000C152948F1B25DFE563317FCE6CA77B6BCD
-:103FE000ED42CFDB91150831AEDF53BE63288FDF82
-:103FF00007A89E24F962E3FB3502BFFE632CD71F9E
-:104000006727ED6C3A01F8183C24B14DD03F78FE9B
-:10401000AC19EDF1855DA7CC6877371E3A6546BBD4
-:10402000BA11EB304EE31E33F1AB78781F1F6BD41F
-:10403000C5D1357BE2685ED11607ACA771B5E4C582
-:1040400014D9F5CFA6CFC6FAFA55B84BE0EF330F27
-:10405000CE4674A9F7776FC1F25AD67714E3052BD1
-:10406000027A3D7F65835E2FAF6FD2EBD3D7EE84AC
-:10407000D301F9756D73AEEE3D861A32AC678538A3
-:10408000CF15CEDBA3C6F1588FB987231159937F83
-:104090006725DF01947ABFC5C22E89E8B8B1D64240
-:1040A000FED7A3793C7F3EB8D6487941414407AC5E
-:1040B0003749C29FE523FEA8C9EFD99D678EE5E287
-:1040C000FB6B4D040716F245D1AF5F2BF0E9DADA4E
-:1040D0009A0F10CF6AD51BB91C1FB3DF44FE9500A1
-:1040E000D7C755E1FFAEEBBCA33A03F5CF8D12F96C
-:1040F000375636E8F5F57AFC05F5B766291C7121C7
-:104100009CF4EDD736EBEBDBC70A3956CA4A914E21
-:10411000BE375692896E44FD4F79BF78250213DD74
-:1041200022F97721DEAD3547C6A35CBB450A505D59
-:104130006B87E78D5CEE70796F008A22BE6BE27E42
-:1041400085D03A89F071E510F91FA31F1887D68F23
-:104150000A7ED26AF56F247BE93949417DA45AF67B
-:10416000C9199E417B361E1F8F093C7F85F57970EA
-:104170005D450874807FD1D2B430FAC38A9E5F4512
-:10418000F98D451592D740F46C60CDE558CAC41F2F
-:1041900050DFB4425964ECA8257E3DC1ACF0FC412F
-:1041A000278BE503BE479884797CB8749C77FEA87A
-:1041B000DECFF01C17EDBEFD0CF23B7781AFFC0E9D
-:1041C00058DF0E2B9F7FC7B312E9AF8D9E63C417D4
-:1041D00073004D70DE46A7E08F9DC01FB5FDC3790B
-:1041E000E720BFC20B210B3C34EF082D3EA0E5D7E2
-:1041F00046AA0C1780EFE488798F97A9B4EFEC1BDF
-:104200003B24DC771E0B6D423FD18FC7327AAE95CF
-:104210009A1F7FF960BCBA06CF739DB3CF4CFAB733
-:10422000885727E8B764ECE404FD7C4CE747986DB9
-:104230003C9F8A71E5F5CF155C34AFC26831E8E880
-:10424000D5A4D874743DBF584FE70BBD7AFABE723F
-:104250006A81AE7DB1AF54D7BEB4A642575FEE9F20
-:10426000A1EB7F55ED2CBDBDEF9CA7EB6F5597E8FB
-:10427000EAC9C557EBFAA778AFD3F31B4707E50F99
-:10428000982DA1BE808AF7E6199B9A31C8AF4B538F
-:10429000A13394B60AAB1DCBF68949113CB7F69110
-:1042A0003C9E9AF4E2B79C11847ADA63964A287F9E
-:1042B0002885AB305E6411765EC9AD4CC7CF1795CB
-:1042C000723CD74A5371401907E7E339A0E6F27C04
-:1042D000E968099E8F051D8888C74F5B48EF9810D5
-:1042E000A7FFBE5256692B467FEBADBEB9E497EAF5
-:1042F000640ADE97DD67E6F94CA1A779FEACA7B3A7
-:10430000CFE08BA1B7BB8B397D7EDF5F45F9498D4F
-:104310005D20CD10BF77BF6346BF5D6357772ACA64
-:104320008DF1FE77CCA85F0F3E17F244EEB761FC2B
-:10433000F2898EC47968738ACD34FE31C16FEBBFC8
-:10434000C5F92D20DC02B48F34FE597F90EFAF7E8B
-:10435000B999E85BE3A3C03F75F1B078BEBC726663
-:10436000780BD22EF0519DFD72EDB2391FA03DC4E5
-:104370005884F418E0A3FAF6515B89BEAF8DB36F91
-:1043800026150FF053CF05A097937E43C27D2D2DA8
-:1043900095695F2703B308DEDF07B8A1DDF8FD21CB
-:1043A00070E2F0FB3CF83C2EFC89DA39C5F7AB2D06
-:1043B000E5FAE8E3C3F0CB3DE21CF749D17264664D
-:1043C00041BF8DF074A5C5B21CF30C8EE57DBA1506
-:1043D000E309F53F96D09665BFEE7E311BF30ECC18
-:1043E000078F66633E44B0E368360338AD35A99B5A
-:1043F000502F063CF06E827369EC8CD0FAD775545E
-:1044000074E3F3759D92175961F0D09939B44FD682
-:10441000B715F5F87DC3ACEBBA62AEA7AC2B56A9C5
-:104420000C06604E94B38792C88EAD3F087C08D7C7
-:10443000F5AC44F730F66DB3D426D24FEA4BF9F71A
-:10444000185ED866661847590BEFE33E8EE51D33BC
-:104450005B106F0E4A6413063B4E2C477F7C70A3A3
-:104460008961DC565BDF8779D1DFE0FEDF5C6D625E
-:10447000786FB075358FC7BEB9D148E318AF3751E3
-:104480007DC51A9E277C64F5EFB6E6C2B86FAE957F
-:1044900028BF7ED6F5FF790CEB2BD6703D281E7F0A
-:1044A00007F0350E3F5704F47837044F1BBE1C9EAF
-:1044B0006E1BC4D3F12867E1DC67E720FEDCCCE8A3
-:1044C000DE62EDF923A61C586FFE56C58BA1DD32C6
-:1044D00063784B36F28523BC7DE2DABD12E72F2AE2
-:1044E000DD67CF6D3733CA532CE67C680F9E5716B5
-:1044F0006EAD5FC2BC362647F3717D2E91C7F5A421
-:1045000089D51E443F92CCF94BD933CEBDB17EA4A0
-:10451000F9021F35BE570AF6FE41F243778CC47B81
-:10452000E68F9BB87F6CB418AFB0A07FCE6228BB7B
-:1045300004BEEC17EBD0EADF10F8CF3AF6911C5D21
-:1045400068E1709FD71CA9C37DDC20071E43FEB71E
-:1045500060F42FD6A25C6BCF7FC913203F5709C9E7
-:10456000B5A0388F23D3DEDBB301F3EDC6D9E81C49
-:1045700017F7DC13C5736D74CB9467682D9C941387
-:10458000B8881F21784ED5DDDB6BEC3A33C79780B6
-:10459000AEAF13EB2D13F7F35817F71F003F96A795
-:1045A000960FF6D3F6AFF93DAC850FD2396DF826EC
-:1045B0009BC8EFEDDF417058B9F68484F752AE32F4
-:1045C000F94C7680F32FD2D872B4835F6A61744F4E
-:1045D000ED38DE570356F24A8B42F5A8B8B7F65AC3
-:1045E0008B4AE55566FFAB089FE52F341522BC8E3C
-:1045F000E4DDEDC7EF309C3E2EF459A6F07B8C0233
-:10460000F7CE76199905DACF1E92C2E43411EBBFCA
-:10461000E6DC4816007EF22B713F6E5DF3EBC4E7DB
-:10462000BC0D67E6A09D3171EDA9AD580F36FFE7CF
-:104630001CD41B7E037202F12BD82931278C5377AF
-:104640002E83DE5FD779C28CF6FCE386FE3908FF45
-:10465000D06189EE55059BCE10FFDC23FC2B69E36E
-:10466000781C31D835D140E7E92BE1F68938FFEEE7
-:10467000923FA722FFB234ABAFCEC073EC35D23934
-:104680006EAFEA4F55129CCB491817F3477E25F2BF
-:10469000F186F0597388FCB2B5026FE3DB93C7195A
-:1046A000343BDC24F2949804EBA913F8558FDF8394
-:1046B000C9403D5F8AD8806EEBBB66917FA3BEE99F
-:1046C000E2DF77190EDF2EB56C64DCBFA1D5D1FE19
-:1046D0008ACDD742FB4B7F0F3DC4EF71E5B9730222
-:1046E00017D1EF827D23297ED2D8CE285EB2EE5C30
-:1046F00009951F3D7B1BDD7BB2D8FAEF46B9C08A16
-:104700000CA4D7AF0BE9F59B4F4B381D7C5AC2E97F
-:10471000B8601CD8271636609F801D5284FA0ED8C8
-:1047200021A93D4C679FC43F27FBC422FC86A02ED5
-:10473000059E4CB0EEBF9454958ECB42BADA49F840
-:10474000CD00BF11AFE2F739651C5F9746CF2B7ADA
-:104750003E30A3BE1BEC4C4CCFE6D2CA2938EEB695
-:1047600061F2EFCE8B7DAEDBCD085EC1DD1904A713
-:104770000FD96E7F15E0E587B00EBC977EDAEF4F5C
-:104780004E87F74F07FCC9189FD3E8BF71B78DDE7E
-:10479000DBE65E9289DFD1982FF0FEA3CE59168416
-:1047A000F335BB39DD69F3FD26B22213E967B2A9FF
-:1047B000DF8CFEC9515DA75251AF9BFCECD24CA4DB
-:1047C000BFE1D639A384F3E575CD2397D3BD1FF898
-:1047D0003102DDDF24E4587073C48CF0BFA9991155
-:1047E000FE763FFDEB46A4DF8FBA921594931F3EF1
-:1047F000971C427E7FFA7052D80043AD15DF3FFA16
-:10480000D0D4B788F4C7678D94AF103CFCC7BB9178
-:104810001E834F27D13D9A9BBA6E3B83726E6DD734
-:10482000DC0F642C1FFBC7D2C3BAE6D1CB63F38B7A
-:10483000FFD8726024F2CF8F64CE276EEA7C8AF4B0
-:10484000D99BCE9F1D8FF9831F3EF79729C8CF8232
-:10485000CF9F9D827C2CF8D3B353B03DF84C72535C
-:1048600022FD646D29F79F68F2D1F586ACF3B3643D
-:104870000B79E06ADB5983DF29987C6219C501B4A2
-:10488000F6C985063FF69FFCF3EACCEB63DE6B8B43
-:10489000CA942F31E94475F2EA18BC4C2E35697E72
-:1048A000BA4BF38F883C04CD3FB22D2AF37B750DB4
-:1048B000C630E6F1AE8CF2F87BBCDF8431FFFC320F
-:1048C0003CEF35595EFC3E0FDE4BC7B8C8E99B0B89
-:1048D000C3742F3D6439EA8ED18356440D9124F47C
-:1048E00083742545501F5A11954F25C5F8457EA361
-:1048F0003CB905D5F81501BD1F23DE0F023F297213
-:104900004CFCA47E63C4A4C9A98530FF2FB6300532
-:10491000E33643FC23B55F253F4CBC9F448DDE65E9
-:10492000C1F75437FF9E8EA667E2791D4A40EF1506
-:10493000829E353A6A8B1AE81CDAA2551637941E05
-:10494000414787406C86302FA86BE94368A7B79D25
-:10495000BF2A19E1D5F6C61286DF8B38AD54590A45
-:10496000F1BDF35FB52CF70CE2C710FE318EF3C733
-:10497000017D601839F7A1E05BFF2879F7C13F8915
-:10498000BC03BBBA1FF937D8D52BB9DF83DBD5F110
-:104990007242E3BFDAB8AA38E7A1FCF703D25FC0DE
-:1049A000FE25FEAB96A8D46F54D7E24CB28BDF58ED
-:1049B00096A9DA878E5F207B0D199EA1E36BFA5AC8
-:1049C00030E43B6A413BC6C7F34F83CB24FA6E54B5
-:1049D000D02F919E1DAC3385B15D5B4F74198F0B49
-:1049E0002EF74AF41D104DFFD3F4C381F649D0EEE3
-:1049F0001AD41735BD30EAE77ED1653E13B55F6541
-:104A00000EE4944CC6FD59E9F9E4697C5CE0034787
-:104A1000D1FF79D5D724FA4E97A62F6AF819AF4F50
-:104A20007EDC5570D1EFCFED1178A9D1D7E838BA37
-:104A3000D0E4D47C81EF8D28A733514E7F66EEB34E
-:104A40000FAF77839C2E2DA1F718BD3FE9E7B23F4A
-:104A500091DD7D588C3B433BB7E80B95B8DE3C16A7
-:104A6000A5BCA8E1E467AEF0D30CD73EFF12E9F88D
-:104A700086927F2C1D5F57F2CF41C703FA9F39F111
-:104A80003EFF52527913E2AFCDD844F7A3D8CF4CB2
-:104A9000E4B78EEFA76AF6A4CC74787C34CF6C4070
-:104AA000BB27D8C0EDFEF674F555B24F5EE4F7EEC5
-:104AB0006F12F94A379E53A86CC70F8361FBB75C2E
-:104AC000E4B7B9F1C009930FDE5FB9519A88FEA02F
-:104AD000950DFAFDB467F9E6C6FAC1DB4774505C80
-:104AE00021F450818AE3D7E366D11FD23E328CB1E4
-:104AF000C746F4E34CC0E731F72D609E75E2F90C30
-:104B0000E1DF61717AC04FBBDF247F0FC685907EE5
-:104B1000CD5D12E585047BB9BFA3B18BF385F71B8F
-:104B200024E227EF8BFC8C60B395FCDB9A1EF181AD
-:104B3000E8B7E66689F4BD217A854F1F7759F7E01B
-:104B4000CF892FC6EB111987F838186F41BFCCD128
-:104B5000BC2912D6D7815D88DF250DAAEA95B97CDC
-:104B60007D2C4CFCC5A7F3A37CDCFB3BB223573E5A
-:104B70002BB14CD23BE2E22FEDF3E2E22FC78EE6FF
-:104B8000E23842CF50E03FF41FC6EB198D9D274C11
-:104B900068177C5E9CE59912BD5F708CCCFDAC63A0
-:104BA000BA2405FD4963049C2EDB662338CD797B4E
-:104BB0007526D2B9763E1F2DE6E7F5D19B9F54E2CC
-:104BC0007B53DE9615E4B73F7D73E3EBB9BCAE5A79
-:104BD000547C6F6332DA211FBDBD3E19E1F85328C2
-:104BE000F1FB48CF9C9413FA0F0B4B39BF01F976B8
-:104BF000BC84FCBFC26F2C837C4B19F4BFC4BF378D
-:104C00004BBCD78EDF2D42FC7B96C7B7DB4704E653
-:104C100051FD9E7C9E472C737C7DAA2B5D417DAF10
-:104C200014368B71D81FD9581BC657DAB3022F110F
-:104C30007DDC6320FC85F7F977270EAA24EFF08A44
-:104C40001DC63FC683ACB1505EA383FC37DA7761E3
-:104C500046801D2ABEA3B00CE3AEA5220E32DEC6EE
-:104C6000641C7F8729B07D1CC65DBA65EF267C4732
-:104C7000F666E27790E2E3315A7C588BCB6871E2BA
-:104C8000E1E23212CE339EE359EC774EB4F80BFBDF
-:104C90001ACFDF6C9DDA44F75F7B31469238EE32F3
-:104CA0007A5C82784AE938ADBF3E9EB6BDF849C20B
-:104CB000B72F1A47BBA164B8F9556E77C6CD3F2907
-:104CC000FDE36CB25FFEFA5FA924CFBACE92DC3965
-:104CD000DD9F24EE71F6713F759789ECF5D360077F
-:104CE00065C5C8B3F6717CDC9EAE59848F87A2D5AA
-:104CF000C9D8FF09F17CDB1BCB96A23E1D8ACA3CBA
-:104D00001F9B71BBE650549ECCF5832170BAAC2436
-:104D1000417CCA624B9C07F49EF017BC27F63DEB22
-:104D20004D6EAF0437F2F88122E82D5863267E726B
-:104D30002C2F5BD2FCC83989E20BCFF6139FAD5FF5
-:104D4000C3E3BB971C5FE8EC36B1FC047EDB9A3909
-:104D5000C46F2ED55FCBD00A9E32C89F2B4BC5F7B0
-:104D600086CAB8FFF6C5127E5F27A36962257EEF6B
-:104D7000EEBD61CF3B70B0F4D2E27CCF7B2EAD9F15
-:104D8000A138513C7068BFA997D86FCE25F6BBA15A
-:104D9000F8D2D6D77589E3EDBFC4F16E1997A8DFB5
-:104DA000FFA3F1CFF8F8667C3C343ECE99F4E2F5EF
-:104DB000216CBB4DBABD3F82D04D7DBA5602529593
-:104DC000D31FB4205F5B308DC703B6555BC27BA594
-:104DD000C1B8A806AF87CBB8DEA578CE84F0BB8873
-:104DE000A37DD1EA4CA0E3D3D318D90DA7ADE27BC4
-:104DF00048B23262319D9F42DFC369B7268E2FAD24
-:104E000014E30DC7475E29AB7CBC7432DD1F4AF842
-:104E10009D8AEA526E67289D8CFC354C56472CA122
-:104E200079D5112867D25EE0CF53238CF2FBA0DD49
-:104E3000B584F467D585EBDB25E25E19F38A5CE87F
-:104E4000A7CB00798B71913B303E427E7D85FA691C
-:104E5000F34DF2F0F97699988471ACD0389E57C131
-:104E6000D42788EF68718DE3A6C8EF574914D7E8B7
-:104E7000C5F5BF6C8878F6B9F8B9207C3D87148AEF
-:104E8000B7BC32EDE162BA172FE21C1B14DEE50855
-:104E9000DA19B08E0DCF5510FEAEEC99F6CB3AD4A0
-:104EA00007DD32C179881E2EECAB93C23ED4ECAB49
-:104EB0003EB41363EC8DB784DE9080AEDE2A4D40A5
-:104EC000A7BB246EFF865EE6F66F85D95B109B4F0D
-:104ED000F5BE80FFAA08F7C36A76ED785FD8900D1B
-:104EE00070A8B8D9184902395DB1B5CC8CFCBA624A
-:104EF0006B9E8DFC4AAB0F1A3478273AF78FC53A70
-:104F0000B7F5F6535CE2A9F87BE61E33B5EF15F86A
-:104F10003309CF16CA0D85722B8ADFB4998A319175
-:104F20005FBC1EF47E5CDFAA76BE5E2D0E521F5162
-:104F300067E13CA78EF66FC5B2BCC1358BFC866BB2
-:104F4000CF6C45B9193C7FF6D815E40730AB89EE34
-:104F50000B3C5B6624383C858A08C26BAE4C79BB3F
-:104F60001573653AEF8C7A2BD9E1192666C4EFAE3A
-:104F7000662CE672ACBCC6310BEB6C593AC9E1F257
-:104F80005E35FD7ACFA09D9F31776316C2E9F3E2CB
-:104F9000439ABFE02AB32FD333F98BC787D61D7F3F
-:104FA00083F2CCAEE9D3C787B478CF70F1212D3E20
-:104FB0001BACF944174F0ECAFD73D0AF52F1DC2978
-:104FC0008A0F073B25C5E91A8C1B050F9D31137C01
-:104FD00045BC08FA9BF1BD0A38F61119F8BD011E4F
-:104FE0003F7A1AF371CDF83D3D85F26E7F82F9B8B4
-:104FF00045F83D3D9E8F7B18F371CD78FF83E7E345
-:10500000F688FCDE60D7198A374DF30CC9A7A27861
-:10501000C42D927FA6479F4F45F5F87885D1C6ED00
-:10502000D060AF89BE771E3C6E213E5BD9B56A0C5D
-:10503000EA63DA77C81B315E10E35FFAC8E7B5E2CE
-:10504000FD9E8FFC5E2BC6092ABA3F30ABC4772287
-:10505000B998C2D42847CD68EF231C28CFAFABD274
-:105060008A70FD5CBF7EE7FFF7EB7F11BFFEE13288
-:10507000EED7D7F847B9DF40F7CACB7B7DD6EB63D5
-:10508000F8C3363FF70F6F73E713FDDDE5CF4F5FD2
-:105090001DEBC7AFE1F65BC65CB735F6B9713CFFF7
-:1050A0001E448694F87EC1768F61383D707B62FD28
-:1050B0002E713C605B0DE7239ABF7F687CC0FBA22A
-:1050C0003BC6CFFFD1CB16FA7B0ADDCF26913CFF42
-:1050D000F4B9A47DA87797D7AC1E9302F5F2934953
-:1050E000CCC5E5912EAEB0B2C6E0B3A6268A23F8B1
-:1050F00072E97BA1F1F1821A03F1F78178418D7C8D
-:105100008AEA423FBFE6CC7B29F8E9EBA7A4703BD3
-:10511000DA174FAD93BCDD6C68FC0006CE655361B9
-:105120001735DC4EF0D65AC82EF8BCB842DDA113B4
-:105130005BD04F3091ED6CC7EF4F4E741B14104590
-:1051400009E20A3CBFB35CE811F1FE01C40F94FB15
-:10515000F17EC1E7C5F93D2FE4FE5CD4F9B306C783
-:10516000D1DE8B3F77479974513FA32CE4565B4DBA
-:10517000F9363CB7D0020343FEDF56536571C78C46
-:10518000F79A87E7CDECC2388523364EC1E311F19B
-:10519000F1098D3F55747F3607CFFDAE2EEE3F0AE5
-:1051A0003AB93FB3E27025DD33195C27DFDF5DCE0E
-:1051B000817B86E98CEF8B59B89F8BFC0AE50B3E0F
-:1051C000E9C1BF37C0FCE9F4F70B82C7DDAD76E477
-:1051D000230BE4C9924AFEED017F37FAA396BEDAAB
-:1051E000300FF3812B964F3C81E7B2BCCE44794718
-:1051F0004B5FADA5EF8A6BF2AA62F9DECDF8F768D6
-:1052000096174B5EAB8AED3555D83EFFB1087AF65E
-:10521000D8425C1DD04BF438F4CE27FFF6C7483790
-:10522000158B85DFBB8ECBD5E55D8B4DFCE3567AC8
-:10523000397724EF53B29BCF7655903F3B13E3ADC4
-:105240009E413953F11CC89F9441F9F3F7CA1D4799
-:1052500019CFF39F00F207D793B198C705E3CFFFAB
-:10526000350F3FFFE1E4C970FC13E507FF7B3BA16D
-:105270005CC939287755B4A72F1B94BF4A27D4732C
-:1052800086C7BF7902AFD387D1BF660BFC1C365FE0
-:10529000A3F31FE3F7AE2CFB27F17B0BFB46F37F59
-:1052A0006BF6D07D02CE5AB947F08DBF3B5F1985B2
-:1052B00062C27CE58CC4F9CAD77448F41D1691AF5C
-:1052C0007CD4CC2A0F3A304F4FDC4B08FB49BF3916
-:1052D0007AEFAFB63EE2C07B09928262675DC70992
-:1052E00092CFEB409F213DA8EB8FDC2FD5C1F34B34
-:1052F000D775EAEF3F68E5112197AB613FE44716A8
-:10530000797C730E71BA0EFACC61D5857EA16FCB14
-:10531000B17EA1A01ACDD2F203C35C2E25CCE36BE3
-:1053200064FD94EFD7D82079511E7C693F918FE7B7
-:10533000F75DAA9FA8AD4CF885849FF99152CE0FD6
-:105340006A039284FAA8C5E05F4BF9BD8725255111
-:105350009EE8BD02DFE70B3FED7E33C783FDD3251B
-:10536000CAABC57B3178BEFB0FF3FCF9FDE53C7F92
-:105370005EF3CB6A79F1E306FDB2741F46CBA7D783
-:10538000F2E3B5FBA18B77DB22A85FEC3075389197
-:105390000EB5BCA2F9A88B601C467C673C7E9D5B69
-:1053A000CB2AE79751BF61F59BFD6509F49B33421A
-:1053B0007E3E56A6CF238AD1CB9F289BACD3CBA9C8
-:1053C0001EAF97FF4FF965E70CEF17365CA2FFEDB4
-:1053D0005B97D8AFA12C817DDD6A4DFCBDD0D4F1A7
-:1053E00082FFC6FDBD1136E47E0F976FED92FACBBA
-:1053F0001914E732519C4BE32FED297CFCB7055F74
-:10540000D1CA7382DF0CF75D49E378DE6FA3E47BDA
-:105410000BCFB1F480DE4F56D6A1F7934DE8CCD038
-:10542000D5274646EAFA57F4E6EBDA27474B74ED00
-:10543000979D2CD7D5A7F54DD7F59FF17E95AEFE5C
-:10544000957EBD9FEC8A734BE2EE1D71FCAE048C21
-:10545000887D6F96E5EBBA7EB90DFA7DE535E9F703
-:1054600035A659BF2F6D5C5748BFBF8276FDFE320F
-:10547000D07FEFF9F2FEFB4D1E55F8EF0BE8BB7F36
-:10548000BB6ADCF49D6BEDFE9FD6EFBF0137C3FC1A
-:10549000BB80700000000000000000000000000061
-:1054A0001F8B080000000000000B53E16760F851FB
-:1054B0000FC15BF918182EF021F8F4C01CCC0C0CAD
-:1054C0009C40ACC8C8C02001C4FC40CC06C49E0CA3
-:1054D0000C0CFF81F81B10BF05E22740EC0CC40741
-:1054E00058B09BE3C6CAC0E001C4DC40B3789889D9
-:1054F000B7DF8917C17ECCC3C0700E889FF1D0374B
-:105500000C061B5E27403FBB7E43ED3A2932F0FE7E
-:1055100006612131609A1447F0A78AA3CA0B8B2138
-:10552000D8C9D294D9950FD40F00F19321F08003FC
-:1055300000000000000000001F8B080000000000B9
-:10554000000BED7D0B7C94C5B5F87CBBDFBE92DD16
-:10555000CD26E44900370960501E4B80C84BDDF072
-:105560003252C40411828A2CAF10027914A9A5FF0B
-:10557000DABB0B2804AADE5851A37F6A17041B2D3F
-:10558000DA80D11B6DE02EA208D56A684551AB0DBB
-:10559000888808498C8F6AB57ACF3933DF66E7CBC4
-:1055A0002E89B6FE6FFFBF7BC3AF1DE79B993367A4
-:1055B000CE3973E6CC9999B3268385192E60EC1BFE
-:1055C000FCBB9C319B893136A62B6D573A86AB3993
-:1055D0005DE5B7F9BDCC6B66ACCE6FA5748B3F9D16
-:1055E0007907C3779FA1306867EC5EBF8BF2BFF08D
-:1055F00017525AEB2FA27A77FA4B287FBBDF47E985
-:10560000667F197DAFF157537E837F0DA59BD445EF
-:10561000692C05FA66458559C98C553D9393B71990
-:10562000725B668D4F504743FE15233366017C9FA6
-:105630004AFD31D5BD69E0E8AE7A1A9E9BD449FD9A
-:10564000104EED128E17B3325B8C7A5938CE3B97E1
-:105650000878F6D69A9CE4A8F50623BCDB4B00DE5E
-:1056600050287085AC39D1E15D8CF03697A8BC5ECE
-:1056700072B0263B3A3C0FD6ABB941C04B0F5863D2
-:10568000D41B83F536DC20F0EBE7ABC98ADEEF787C
-:10569000ACC75CEADF5AAD8CFEBEC9C6FFB7BB4ED5
-:1056A0005D2CF246CC263136AEAB9D3E652CC070EB
-:1056B0009C2AF315121FDC995F7F93CFD84D0813F6
-:1056C000DA0726B19011FA0F24B1E0FA2CA9FE4CAA
-:1056D000AADFDAF7EB6F52A5FA014394FA26D6A0B7
-:1056E00060F9CF518E80EFF7F97329DD28E4E7BE2A
-:1056F000A106C6B05DBA393808DADDE3F790BCDC44
-:10570000ED1F4BE5770939FC7721674121670FA22F
-:105710009C41BA15E5CC8CFDF95A4B014EFBDE7865
-:10572000B6D94DF2B598F05419C1DFB077C8F6CDAF
-:1057300000FFBE1B569DDE06F46F6B1EE63142BDB8
-:105740007B866AF2C5BC2CB9ABDE3DB34F38170D72
-:10575000257A97219CBB3D827F2A0C2CA2DEDD336B
-:10576000C2F52AB0DE5D9E30BC5064BF774D09D7CC
-:105770005B457C56584983BD3B5F763085E6230800
-:105780000AD1D784F48579F9EC80EB9456689F921E
-:105790009C97C6A0DDFD381FCD38EFDC4417AD3D2A
-:1057A000D2D907DF332CAC1AE10365F71B015FD3B5
-:1057B0006C7722D2E5F66B8B98328CB1BEA23C3569
-:1057C00050A464015CFB9C2205BF9B6643397C7737
-:1057D00089F2E435BCFC762C7774952762397C4FCE
-:1057E000AA8672C8DBE7F2F23BFCC089C15DF536E0
-:1057F000019F7DC4EF74FE1DD88AF4318DE6A98621
-:10580000F713282440BF83988EE9C27FD3A07B334F
-:1058100016DABBF0B50DAEA7BC86DFA6C17194D772
-:10582000F0B15DD82F6321A47D97F465DE5C311F54
-:1058300058773A277AB3A5F24CD593A0029D325FF0
-:1058400032B200B02013C413E1E9DB153103E1D912
-:10585000E3FC4BEEDDFC330D95E9A0A547053D3497
-:105860003A6CEC2FD3C13240A6C3C601321D2C17AF
-:105870009C9F0E3B989BE81C8B1E5ABF9B87C8FDC4
-:10588000C65D24F7BBF922B9DFB88BFF39FDD664BA
-:10589000C9FD5AB3E57E6BB2E57EAD39FF58BF4C0A
-:1058A000F5C064407DA5FD5D28E9B7AB99EF2CB646
-:1058B000473D87F349D373A6641FF3D9BBF809EBBF
-:1058C0001463F99170064B7A15E07C8AF5008EF727
-:1058D000FC705C3A3883F470BE16F8B0483DDD0DBC
-:1058E0000E1BA81F8749E1ED428688FE99EA6345B1
-:1058F0008EC8761E5DFF39FAFE9D8A1887E1BCFDD1
-:10590000BB7574CDD6E39326F06186F3D183B97469
-:1059100070B2F470DC029F90725E386EFD382E1407
-:10592000FD071469FD027A0CEB6AD70EF8D13A959F
-:105930006709EE04FD10DAF7E5295C07CE355EEB6A
-:10594000B640FDFD232DA1CBA1FC5CB0206881F207
-:10595000C94F1E75A21D53F1A451C572C33E1BADA4
-:105960002F6D3B142AAFB2B4DC3901CA3B9E34B26E
-:10597000EDD45DA601C7774AE81416E2F9521BCFB1
-:10598000566CDB7F23B62F6BB2301BC0AB787AD955
-:10599000CC09905F76C8C4B04AC5CEB5E6BE905F6C
-:1059A0001E541A300FF8D23A15C8B3057742FD7568
-:1059B000FBBE6C43FCCF359A06213E67609D70C3E9
-:1059C0003AF192A3257536D0A73CB87B1AB62FDFE3
-:1059D000A57840C301FE3B0F6620FE8F281E0BB04A
-:1059E00070457D3C7347CC97538D461AEFAA6D4A9C
-:1059F0009001BC65AC761AD2B302898378782C41C9
-:105A00009BD235DFCEF8EBA83F2D5FF108F407ED10
-:105A10002B1F573C38E44A03F3E13C6E7BDA56F225
-:105A2000901DC7BBD63CD881E3DC68C67ACB820B1D
-:105A30009FB2B911CF6DE66988EFD66DE6D2A14865
-:105A400047B6A06828E2F77F65FCEA8C5E1CEFAAE7
-:105A50009196ED46C083D943036739BAEBD933B089
-:105A60005EB923D6CF72067A9FD6EFA0B97858D701
-:105A7000F72F0D89A43F56D41B99DBDAD58F261F4B
-:105A80008123423EF63A88DE1A3F57B9F814D0F81F
-:105A9000B92A51F057EDC89F35AC3B3E77225FC81D
-:105AA0009E7651FA0B583731DD02EB3CD2EF5EB0F7
-:105AB0009FDC64977BE8FB03602761BA15EC244CFC
-:105AC0001F043BC92DEC24ACB71DEC244C77809D02
-:105AD00084DF1F067B1CD37AB0C7F1FBA3608F6302
-:105AE000BACB1FA0EF8FFB6B286DF0D752BA07F926
-:105AF0000669A33F48F59EF2D753DAE46FA0EFCFD3
-:105B0000F89B28BD5DD0D1399115E03AEAF43217FF
-:105B1000923D6986B7C004F9A4229E4FBD21506012
-:105B2000867CAA0FF24097BE2B430516C8F7ADE658
-:105B3000E5036E6193AC901F10E0E5D9B77B27D9E0
-:105B4000209F5DCBCB076F0D4C8A83FCE0202FBFDD
-:105B5000685768523CE42F6AE0E5C39BD9643BE494
-:105B60008787783EEF25EF6407E4F35A783EFFCF4E
-:105B700081C94EC8E7B7F2F6E3CF068DEE28EBEF0A
-:105B80001E937B31AA9C03CADB5E3503F266F74D98
-:105B9000A8128F2AA728DF68F252F9FB4ABB578563
-:105BA00075BED1ECA5F22F94CF29FF94C947E5F13A
-:105BB00006A580F2661F95F737C451BEC914A0F23E
-:105BC00011863E3C6F0E507981A15F01C27FC614E1
-:105BD000A4F26B0C8378DE1CA4F25FA8C30BA64072
-:105BE000FDC70DBEBDA8EFD62BBE32B40F99DA901B
-:105BF0008EFA4AB32B77E2E0D0CECC30D33CD8F348
-:105C000087FC87681EE05F32E64B1F46BB14E01C32
-:105C10002438268063EC194EDECB632538792F9724
-:105C200069705E2138B6DEC1D9F3F278199F97CB3F
-:105C30003538C7088EA377E3CA7B65A28CCF2B2BA0
-:105C40003538C7094E62EFF0693C2AD3A7F168984E
-:105C50003E67707D589FD23B7C46BF26D367F46B6E
-:105C600061FA7C4CF864F40E4EE36B327D1A5F0BE4
-:105C7000D3E72B82D3BF77E31AFDBA4C9FD1AF870E
-:105C8000E96332209CACDEC179EA6D993E4FBD1DBF
-:105C9000A68FD380F419D4BB71E5BF23D327FF9D12
-:105CA000307DD2089F21BD83F3D43B327D9E7A277D
-:105CB0004C1F37E133AC77E3CAFF8B4C9FFCBF84AA
-:105CC000E93384E08CEC1D3E4DEFC9F4697A2F4C2A
-:105CD0009F3C8233A677F88C3D25D367ECA9307DB5
-:105CE00026109C71BD83D3744AA64FD3A9307DA6DC
-:105CF000109D2FEDDDB8C6BE2FD367ECFB61FA5CBB
-:105D000045700A7CF5840F03388ED8709E3927D3EE
-:105D1000E7997361FACC213853014E4ECF70C6B764
-:105D2000C9F419DF16A6CF02827365EFE03CD326D3
-:105D3000D3E799B6307DCA88CE57F56E5CE3DB6554
-:105D4000FA8C6FE7F4A9B278263BD0BE4B649EED87
-:105D5000D0E492930D079C9037D99907C1BEA484D3
-:105D600076207C582BC92E543D9A9DE2616887CEDF
-:105D700070BA3DE8F7316AF6086BA1FD827D57A243
-:105D8000E40FFAD230E916C4D701565BA45D923015
-:105D9000364EB28712BD4952BE4F615FA97E4A514D
-:105DA000B6549E567291549EE1CB93F29965E3A549
-:105DB000FAFDAB2749F90BD64C97EA67056649F916
-:105DC0009C9AEBA4FA836A1749E517D6954BE543ED
-:105DD00082ABA4FCC5F5FF47AA3FAC619D543EA22F
-:105DE00069B3543E32F40B293FEAD00352FD312D02
-:105DF000DBA5F24B8E3D2A958F6BDD23E5279C7E3C
-:105E0000466707CAFBFFF5058CDB831966B20743BB
-:105E10000E33E5CDFB6C64FFEFC73CF0D3DC7706B7
-:105E2000E5CDCF2E7627E37E1A01C07A5FD0B7EC9E
-:105E300042F4F7DC3CDE77A10BBEDF6CF68D7045DB
-:105E4000F1477854DF3E03F98B5A14968EA9DB8014
-:105E5000699C51ECD72D5CBE3666E53F148890D323
-:105E60009AFE30FF207FD86026FB5593EF8DFD4BC7
-:105E7000D31746F4B3A1BFB964FB50FE7DB11DFB3F
-:105E80002B7A11E75995B96330E2A5EFC7923D56D9
-:105E9000EAC73AA08CFA790DFB89F07B590694E9A0
-:105EA000FAB1966C17DF453FC7705CB1FAD9983DDF
-:105EB0005E1ECF8072EAE75D5D3F1B0794EBFA89B7
-:105EC000E3E381EFA29FF7CE3B9E9C89F2782E58A8
-:105ED00049FD74E8E866B960A5AE1F3BF583DF179E
-:105EE000933F17760169C0674B4729C9C17FDA58CC
-:105EF00000E4C29C59FE6BCCB3B76C6C10F6E38621
-:105F00007EA11ECBE5FEA3A70D49349ECFE280FF04
-:105F100011766AD77E3640FBE2A5024516048C60F6
-:105F20007F5B296473C9AEE20137B9216D3A30F065
-:105F30006EEC678BC33308F26D4D93CD8BA3C8D342
-:105F4000D25AD3A9D648BF88B6BF99C472ABA1FFB5
-:105F50005D369794D7D2958A8B097F04E54FC0BEF2
-:105F600085C17EE0CFB02F6040AA774D7C9FF60EB2
-:105F7000EC6F30DF0AFB1B2C676C2DB53B21FCB4AA
-:105F8000276E578248EFCF7EF24313E9F1007B354D
-:105F90003D15FD6EFC6FC19A78F4F187F15B18E84E
-:105FA00023E5415D661AD2695F48FBDF8EA72DC1EC
-:105FB000ED48D79A4CA0A9A897CDD8EBB0C9CD4849
-:105FC000A26CA6612C63B3AB8BA7A6D12C52FAAFFF
-:105FD000023C67358E34410BD6666ABDD163EF82D1
-:105FE000CBBCA613481F2BFC4338D714423EA2FF5C
-:105FF0006B8BE4FC5CA676E581DF838DD9826FA292
-:106000005FB7D7847C2D4AE5F8CCC5340F8BB9BF78
-:10601000A3C4C5DB6AF8542D36B110ED4F03290C2B
-:10602000FDD18164AA779DB6CFD4E15762B27A8B55
-:1060300080AE250B8D44573DBE6FEE8BF71A86431D
-:106040005A73B7095D9B3DE13FCF2797B332DE9F7F
-:1060500046574D5E4E09FE9E40FE43FA3EF21FF04B
-:106060003E29F8DF25C79CFF5516DF4CE47FC7FDAE
-:106070004646FC127C9F23F8BEB456E6FB1CF49304
-:1060800043FD39ABB382EBB17E5D1F89BF307099A0
-:106090000EB5774D05B5DA0DFFB7851C5C57B3FB20
-:1060A0007964EFF565BAF1093EDC28F8305F478F77
-:1060B00039826FF305DF96B1C06D19E43F0A9AD0BB
-:1060C0002F36AF4C61A82FAA7EAAF1AD55E29B4FA7
-:1060D000E39B0EDF1B05DF6EFC09E79B1EEF56C13D
-:1060E000B7D6BA8F4D2CBB3BDE7A3C17ACD18D2B8B
-:1060F000A0E75BAD38777099D1DE29F616F439192F
-:1061000051FF9AC22BFB9C8CD00BD716154BF9B9BB
-:1061100025F3A4FAF37C0BA5F2EBCB964BE5F3AB9E
-:106120007F28E517ACF989547F6160AD54BEB8662D
-:106130009354BEB4F62E29BFACEE7EA9FEF2E03633
-:10614000A97C45FD23527945C36E295FD5F4B4542B
-:10615000DFB06FC8D5285F2F1D3532F4977DEA79FF
-:106160009FFC759F7A4C1EAC538932370EE5D94D92
-:10617000F27CCA9F4BE969BF87E4FD8C7F2CA56D3B
-:106180004D07ECE87FAC8A03BD9F0876B8F1CDB52A
-:1061900035FD70BD81F6E3196B36B6AE0D40FE00DD
-:1061A0001E46C1BC99516766A1510CA4BB6F589E95
-:1061B0003B8C11E5AD3D94D7A92CD4A77BF98CD6A7
-:1061C000E8DFDB958EC119E8277CC3C27646F8EB81
-:1061D000BA9F57B04CB42B62959F35B0B2C8F3ACA0
-:1061E00093467E4EE2344E3A698474A599CFFF956A
-:1061F0007B32263127E64383ABA3F85DC2FD350031
-:106200003269C8E71C69DE2FABBBB86B9E33EC2745
-:106210009BE476797094F47D45FD04A95DAEE27B44
-:10622000D708F5CEEE37D27ACD4207065C330CF1B3
-:10623000F39EC4EFAC2985ECAE16BFB7CFC9818CF5
-:10624000FDD15F48E9ABFE224A5FF397507ACCEF6D
-:10625000A3F44D7F19A57FF65753FA8E7F0DA5AD98
-:10626000FE00A527FC35949EF4D7527ACA5F47E911
-:10627000697F90D233FE7A4ACFFA1B286DF33751EB
-:10628000AAE9CF9EE4EFB4585FCFA0FC459133F369
-:10629000AD6C5DCDC42E398B532DEB50CE34FACE80
-:1062A000A8B308794895E42111D76192B31ECAEBCF
-:1062B0004C420E63B58F5E8EF2D6F77B9037C6D612
-:1062C000911CCC1472F75DE58DA1373E05E529538D
-:1062D000274FB21C6A72A4E9815CA568B83AA64B44
-:1062E000AE661AB99DA4C9D5CFD14E8C626FDDA020
-:1062F0002A62FDE3F611F36518D07E5B25FCFECC27
-:106300009D4EF94ED1F77A00D782F5D4602EAE2398
-:106310009DB97F1B8CFEF1CE6316867EF858E3D3C1
-:10632000CB4B6CBA7B69FF501A84456D54F7725B96
-:106330001CA7ABCDC00A591E9ECFE61FF3013FE359
-:10634000FEF3E23CDCD7C27795915D15F41447F17A
-:10635000B73394F1B49EE9ABD53FF5C097F9786EA9
-:106360003E53CCF3B803467EAE1D7AC8734DC4F9D4
-:106370000CECB7D3D1EFDC31C8EC22FB21D457A60B
-:1063800063B0AF44C703833E1B8CE71B9B400E7179
-:106390007E750E1C9CC0CE231F3DE9F99EE8B928EE
-:1063A000D8B797F434333C37027A6EC7FB2FBDA5BC
-:1063B000674F7AB227FD786233A7B353D8A7B1E805
-:1063C000DC3E09E65D1439BE475565396603F97947
-:1063D00087467FDC9746D0FF52BB9BEA3FB7EFADC5
-:1063E00001ADD04F67E385098C9FE7905DD7F1A49D
-:1063F000B0DBDD99321F5BFB125C0DCE734FBE3EEE
-:1064000000F7C9B76106E6D993F145BF5253BAE028
-:10641000F5F61C3ED6B8767FCBF9D99EAACDCF969D
-:1064200001284F9F093D10737C3DC9298E0FE05C08
-:10643000A5F0F16D3016FD0EF54C787CA3537A353E
-:10644000BEAA04335346007E0EB3992530B643F5F9
-:106450001D54691FE7690DA09F625FBC673DB0A432
-:10646000CA79E6E5901BDBC9FE8C15F536976C3FC3
-:1064700025BA64FB29C315693F751E7AC8E903FC78
-:1064800056A51B5C2747E13AE715EB1C5F5735FC27
-:106490002A1AB25C76098E9CEFAC550A1B489EDC2A
-:1064A00009B3A39C9769E9AA74B3EB24AC5767EAD4
-:1064B0007312B0DF337EAB8BAFAF2E17EF37DD1526
-:1064C000B9BEAE5C1347F535FC62C1FD67E3C75842
-:1064D000237BD78AEB2294E5C4AE1F939FEA2766FD
-:1064E0003A976E367D86F6BB2D57B3DF55CA6B7073
-:1064F000AB1A8C01CB08FCBE4BEA0FDAB9B5336698
-:106500006C175B6E54764AE327F0DF8A07EFB46FAF
-:10651000B5129F7D003101E0B5ABF61A94AB132A9A
-:106520009FCF55424E2BACAD669F9BC8DD82F2BC1F
-:10653000682CD326CCDCB7404F7FF0A289EE69B13E
-:10654000AF007A7ED7558125ACC8894ECF458D2BBB
-:1065500066E0BAFD8141DB0FD7E6E3B8CF314321D6
-:10656000EAA573EC8FCE5111F3758889FB63580D42
-:10657000DFE704E01F8E6F69ADBCEF595627E74B8C
-:10658000D9AC54D4B7A55B4C2C08B82FC77D933633
-:106590006ED0BF1926EED758C6AA37E03EFD5E136F
-:1065A000F7F72C72313513F0AAF88F5FE6A3DFC737
-:1065B00063E27687769EBC3C89E35D3E3B68F642AB
-:1065C000FD771B47CD018D0BED831BC8FE29669E11
-:1065D0009DAC3BDD17D7C8F8F584BF1E5FCD0EEA32
-:1065E00076AE2DF048AE57BCC1287AEE329322F633
-:1065F0007F7C7ECC36C9FE9C7926D9EFA3C9814920
-:10660000C8C109D577B5690CE73BF251513BCCBE07
-:10661000887AE6AE7AB3CF57CF82F58C546F9E2935
-:1066200005EB754CA3FD3103791ADA55CFD605EF8A
-:10663000460E4FAE57F11F8F3D15007929FFED3DF6
-:106640004E06EBE6076A6DAA07BEAFDC799BD30B5B
-:10665000E96935E0447E7E10341646A3C796303D86
-:10666000BC7605FD69423E594D80FC149FED34B95E
-:10667000C8CF5F6F0959404E2B1B97CF60C3297F4E
-:106680009CE7377E64C47C93CCAFF25FDF93EAE68D
-:10669000F76CB83F8985C8CEADDCF1DE345C2FAA3B
-:1066A0005807C999BE1DF6FF7912CDEB85E684EE39
-:1066B000E58027F913AAC42CAB6AFCF9474627E604
-:1066C00065F92813F62AD209F7F9B7991CC9A7E288
-:1066D000217B09BB04E7B9460F16E476EBFA47EED7
-:1066E0001B7E1CF039BBE345A73234523F7039EBB7
-:1066F0006C58FC2BAB21B61E6903398CB48F00306B
-:10670000B57337097BBB99A72B4D2127DE6759B994
-:10671000CDE40109642B1F3332BC07C0DEB004D1C5
-:106720002FBAE2B1E75F1B0F745FB1DB943C830FBC
-:10673000C7AEA476F1A50AFEB726AF8B0FE54F3C96
-:106740006F760FE3DF6F49EAE2C78ADDFBCD6C5855
-:1067500077FA4D6ED86F6EB547E14BC3F169B8CE8D
-:10676000AE7FE4AF66F4277EB04F616959DDDB97F9
-:106770006D7B9ED63BA413F151F029CCB76EFC0A79
-:10678000CD7C6634D573A11E8CC5AF6542EF823CCB
-:106790003FFE0CDEFF79D3E2C1F1973D7E9313C734
-:1067A000F1BE5ACDE5FA97B7A5E2FC2E3305525D4E
-:1067B00094F2EF650FFE88E46DD9911FA592BDC0DC
-:1067C000BC1906D2C5810C1CDFD2ADD7D2F84A99CC
-:1067D0008FE4AEEC97C622BC8FF8A9CA0A77479916
-:1067E00017716685F0797F3B183230BEF7717F896B
-:1067F000FAEC8F46BA17C5D80FE9DED88FC45861B6
-:10680000E5A3FCA756CEA7E3424FE24496E475C742
-:10681000C616E4CF99FEDE343CE7003A0404BD948A
-:106820006F00AEF1C8D434CE1FE656F3453BD0EF2F
-:1068300093F13BD66F31796DC3A576421FF2FE57B7
-:106840008BFE01EF385CAFDE4F8D6EEF8D11E38371
-:10685000BF1616215F11F39BCFF71D9BF8FCD6E600
-:106860007BB0B810CB3F7995CF1F6C87EB03E01559
-:106870004AA3F2FDB315D207B0AF8E36AF7798C4F6
-:10688000BC96CBC152A4F51EF0569584483901F848
-:1068900049447FDA07976E817611F65715F647F56A
-:1068A000CC5DDF23D68765420F98CC30FF2FEE9A60
-:1068B000FF6C2B9FF73DD9932B4DC1871FC0F9FA71
-:1068C00086C51370E37C3515E1B83FDC75E0B5EBA8
-:1068D00040AE3F6CD0E6A9AC3FF5F3B46CCF1816D0
-:1068E0006D9E7E6887FD55B4790ADFA3CE537B2B5E
-:1068F000C9F1F7AD3F35BA0D35CB7A13F5E033EE7C
-:10690000D8F4D3EBC1DF9BDC4447BD1E84BF57598D
-:106910007E77B9D3E44D93B3F2DF545C80FA262C32
-:106920008F9ABC85E5519337FD3865BAE9CBFF2ACC
-:10693000F4CDF5D6C26BD02EB67630DAAF14CC36A5
-:1069400006719F6CFD84D17C9F74433CE5E71A5B24
-:106950009F409BEFAD8AB9C3701DBF9E054CFCDC08
-:10696000BCD64476EA57DF7C3311C6739DA0EBF5A5
-:1069700040E6AB800F25AA128A033CE7A92C909031
-:1069800084FE62859D88C0E3FA32398F7F97A576B1
-:10699000C1E9A9FEB7B5ABBF6B7AC4CFCFAEFE8459
-:1069A00029ED2FC0708E90A3E2667E4E51355A09B4
-:1069B00066D3FC6B558B22F6098F99B99D7164CA19
-:1069C0003563907E05738725907CD70EA17D6095F9
-:1069D000D05B9D017702EAF3CEE61CDAF7751E5A0A
-:1069E000ECF045D15F07849C3D2FCE59DAED4AADDE
-:1069F00011E4BD9D7590DD12B0DBA2FADDEACC0694
-:106A000061EF08BEC19F11FA2F1172380F9A26E468
-:106A100045F06DF6551FA8CEEE7CC0BF1311FB8666
-:106A20007F94BE28D748DF03B6D6694551FC338F23
-:106A30000A7D7DD9B35F98719D9BD25CA0221DA772
-:106A4000D88D92BF63BB365F87B2A188D765CF2E42
-:106A5000BF630CC871D521A3C706E3AB6AFEC8ECBF
-:106A60008BB27FD3D313E1A3FDD86AE6F6F151537D
-:106A7000D152A4EBD16BF979EE9FCC9E8A6878CE87
-:106A8000B6723CE7B1A24F472BFF7AF42D98EB0882
-:106A90004D027A74DAF9FDE4EEF2C7E77DA74B09FF
-:106AA000AE55500E8D3C9FCCEFFF4E63BE3B262A69
-:106AB00034DF2F8FD45F054DC58FE17D96CA66C543
-:106AC0006580F24AB5D58C725CD5B45B45BBFC07DA
-:106AD0006EFECE82A9D5C36647F8B75ACDDC9F7447
-:106AE000E06FD7CD47FA7E3CDBC2102FEFD08F9CF2
-:106AF000B8DE7FDC3C8AE641AC71FDC1EFB9660AC5
-:106B0000FAE3CD5C9FE9E5615A72BC94BF7632EB43
-:106B100087E7BC97595A6FF244E1DF3A0B9FA7BD54
-:106B2000D66FD6FF61FA6D22E8372ED7A648FD361C
-:106B3000DDC2E53E42BFA545D36FABD6BAD3502EDA
-:106B400056EDCD4943BEAE3ABC34259A7E7B41EC2E
-:106B50006B0F8B7BD2EDFD40BF8D88D06FFD40BFAA
-:106B600045F1838FB66876670FFACDFADF33FF5EA3
-:106B700040FD1665BC5708B9D3F45B61F35AD26F78
-:106B800085FD8CD27DA4CB2CC28E8BA9DF16DE7343
-:106B90002DE54D9EF828F2837445FD7658E839ECD2
-:106BA00007F5DCCF2CDF4ECFCDB3727C7BD473FFE7
-:106BB0004D74D6F4DCAAFE0AD92FDDE590EBB95569
-:106BC000595CCFADDACBF5DCAA415CCFE9F5DBA4AB
-:106BD0006EFA8DB7AFCC85F6B44FCCBAEF06BCCF0A
-:106BE0005762F258A1FE0CB7F6BEA07A4CA4BEFBC9
-:106BF000992586BEF380BEB3F7ACEF5E417DA792C8
-:106C00001E1B88F3482F1FD307C64BF7D58E7E7106
-:106C1000EA37BFC5F9F20723DD077ADDC0F743FB8A
-:106C2000BE38350AE7DDCB880FCC979D42FEDAFCF3
-:106C300063499F4E1ECAE77BC5A1385A272A1B15F8
-:106C40003EDE5B94A01BD781BF7D4EFBE4F97BF950
-:106C50003E79AE85D383FDD8C8DF4500091646C806
-:106C600043C9E7E5E4E72B519915EDD70587A67FE2
-:106C70008076EB82CF6BC8DE5D80DFF17EC5EED61D
-:106C80000D99D0EFFCE50AED3798B80FA1DD97B864
-:106C9000BE793FDD5FD1DF83D0F4F9FC6AF9FB02F6
-:106CA0009D5D7F408C13EC59A20B7BC518D53F77B7
-:106CB000404F0F0F1F7FC56A6E1F87E901F4712BCC
-:106CC000DDE9011C9DB130B56BFCF39F8471257724
-:106CD0008D4BA3877E7CDAFE6481981BB1C6ABD155
-:106CE000AFDB78357AEAC6FDBC45D84517B36138C5
-:106CF000CF5E37F8EE188372F17B183FE03367DE22
-:106D0000A0B4483DFCA2D0E757F98E4F497523BD8A
-:106D1000F8FBBBEBCA763F9F0AE3B8DA9B9587572F
-:106D200011AEFD9BD9877E8403B60ED26B9A5C5D53
-:106D300068E572FE7701E7685FD7145A3F9A141727
-:106D4000CD97904E6F897B6155404F9C8F554D621A
-:106D5000BD0179C3F9364D5B7F90FEF09F573573C7
-:106D6000FA57552B44FF99ACE320D2B73259F1843E
-:106D700000D4B4A6DDB7E13DAA176CF01DE76D990C
-:106D8000E2D9CEC961CF488D2A976A34B964D54318
-:106D9000C8AFA0AD830BB05E12BE17793D05ED13F1
-:106DA000BDBD7199A5E528E271D98F4D6C1BEB6EC5
-:106DB0007F68FCCE857FDF44BBCFD383FC0E12F609
-:106DC000E50B486F3BD2B5C38C725F15E2EB86567C
-:106DD0005EA5BAA7107D347A37C1BA309AD31BDFCB
-:106DE0007DE9E979B5964779C6FACD8A09DB5F096D
-:106DF0007CE80345930D5F1CD4E417DF89E9E98241
-:106E0000FBFF8C88F98E7A29F2DCB1B2E908D165F2
-:106E1000FA6A30AB22E88EFAEA7CF4E9361F9AF679
-:106E200047BD07F56DE7C38556793EECB375BC38B1
-:106E300002FD5B7B15D207AC3951DADF5F61E5FB00
-:106E4000A603361FC96DC76113DDF7D6EB8DB1827E
-:106E5000FEB89F887C0737190782E7BB2E1B7B573C
-:106E6000C3239BCB4FA4BE7EC1E6233EC5823F4DCC
-:106E7000C08F652F85F1C5FEF03CC52DF7A75F2FAC
-:106E8000343F4F4FE3BA46ACF7DF755CE1F349D6C8
-:106E90006266DC9FBFDB1C71CE3447F8F9353F5882
-:106EA00044BD999631B1EBA1BF2504E37E61D74380
-:106EB000E4D73DF7E8F19928B72B7E676456E07375
-:106EC000DB2E070BF17B14665C57CB1B8D51CF4536
-:106ED000185B4FF8ADF8AD83F44AF91E4B7006B459
-:106EE0002F7FEADDE1E89F6A5BC7F54BE051211F88
-:106EF00081D6E1785E5EAEF2F3623DBC1F0B79395C
-:106F0000FB747C09EA47A59EBFEB2C6F986BB244DB
-:106F1000ECCB2BF1C08DD7A37BC8814714F28377CC
-:106F2000C76F2DAFF708D77BE54DA620BE0F2DAF5D
-:106F3000DF46FBD9AAFA8FCC68C74DFEED636447E4
-:106F4000543519653F61BD3164213FA6F138A67AF9
-:106F50007F5D656305CDC7CA06E10FD3F98B56FC8B
-:106F600076EF530120CD8A277EED443D73A665A7B9
-:106F700093FC70F5DCCFA6DAD5E87EB89EFC6F0DE9
-:106F80009BA2FADFCEE07FC0FCDB6A95FD6FACBE52
-:106F90004FAFCEC1573CF6E983782E7476CF870F7A
-:106FA00022DE2BBFFEF8C19FA27DB2CFE6C2F5AEB6
-:106FB000EAD1A3E457D7DA3D25E655DB23BF7EF8B7
-:106FC00001987F6D6F58E8FE55DBDEF707B8619CCE
-:106FD0006DBBBF4845FFE5EABD5369DFB2FAC9C9D9
-:106FE00069E7BB47827219ECC579889E0F071A8D35
-:106FF0000CDF419E3B66213B23EC476DA8E07E6998
-:10700000B7F09FEE8A7EEEA4F9FD2A1BAFB9FA52C3
-:107010005CF71A4D1E377D177EC09EFCA6AF023F5F
-:1070200047F4826FBB845F5CC7B773F81FC09F3F94
-:1070300059657FF3A78D4B7FF5009635F689E937C3
-:107040000DF5825EDAB9D636ABF71D2BCE873DBF84
-:1070500021FF34F20B6C6ED6F6D8A703D0DF70DABE
-:10706000D47123DDBFD86BA17B42E57B5FA7F9D14B
-:10707000F6E4113A2F62E25CA98D85FFF83980D8D9
-:10708000CB54ED70707FABA03BFA63DD4EFA2EFC63
-:10709000AE5C6E357F6C2C3F6C1F9BB8072ECED933
-:1070A0002A76BC65663ABFB63216F9745C3A17D4D4
-:1070B000C6AD87E7423A5C12799E10CBCF2DF468BB
-:1070C000984FFC1CA16D9B385F089F1B30D62F0F7B
-:1070D000EFBFF3F3EEAAA0F23A8B321FB5F304A789
-:1070E0004D371F83BD3B47E819DFEF460FC5C6F795
-:1070F000AD1A5DCE7E155D1F0FB129E2FD812FD740
-:1071000016B1EE2C10EB4925D08BBF27E3F89E1566
-:10711000FBBBB38F1A83B80FDED07080F4AA7E5EFB
-:1071200057B2E8F143C6DBB83EA96CDA3F1CF5CF95
-:10713000D9679F26B9ABDC75DC1C003807EB9F30A4
-:10714000B70EED9273D4D7C1087D7DF6F1FDC3F97A
-:107150003907DF47EAE15F21E05735CBF0AB767DB9
-:1071600024C15F116830BBEC3DF77346F5CEC5F125
-:107170009E6931515C94330DC6C268F14A86622023
-:10718000A9942E3A6D70F0F771C62433D991AB1DD6
-:10719000638F2524636A76E33E7AFD5A7E1F72FD73
-:1071A000CF3CE9C897F58973E81CA856474757B202
-:1071B000AB00F7D7AE2945A351ACF47A20D16B9040
-:1071C000F05EED284CC3F7DCB70A7B84A91E7ABFBA
-:1071D00067744E2BC471185D06972DEA3ACAE1997F
-:1071E000EC45142FC2E492DFD37DEFF11FDCFDE408
-:1071F000F80F817EFF68FC07467130FEDFC77F080D
-:10720000603FFF02F11F42E4B7D1E23F247FCFF19C
-:107210001FD63239FE83E06738FE83E0E7FFC67F82
-:10722000F8FF2BFE8331EEEF53303E8316FF21250E
-:10723000CE3C3532FEC38571095323E33F8C8B4B23
-:107240009F1A19FFE10771595323E33FCC8FBB68A5
-:107250006A64FC87AAB8515323E33FAC8D9B4879FD
-:107260002DFEC3DD7153A7CAF11F664E9D02F9B60C
-:1072700038DFDF71BD8A15FFE13D9C2C637A8EFFFC
-:107280000070CC716362C77FD0C38915FF01E02411
-:10729000109C18F11FBAE11323FE03C049273831AF
-:1072A000E23F74C32746FC078093457062C47FD0D9
-:1072B000C38915FF01E05C1497123BFE831E4EACA0
-:1072C000F80F006714E11323FE43377C62C47F008C
-:1072D0003813094E8CF80FDDF08911FF01E04CA541
-:1072E00071C588FFA087132BFE03C09949F8C48895
-:1072F000FFA087132BFE03C0994BF8C488FFD00D65
-:107300009F18F11F008E8FF08911FFA11B3E31E203
-:107310003F009CE5042746FC073D9C58F11F00CE2A
-:107320002A821323FE831E4EACF80F00E7A7042722
-:1073300046FC876EF8C488FF00706E253831E23F46
-:1073400074C32746FC07807307C18911FF410F27CB
-:1073500056FC0780732FC18911FF410F2756FC0788
-:1073600080F32B821323FE43377C62C47F0038F501
-:10737000248731E23F74C3E7BBC67FB085062A3954
-:1073800014FF81E24486E33F247FEBF80FCD88EFC2
-:10739000FFC67FF89F19FFE166BBEFEB38F2837EF3
-:1073A000B7F80FB6F86F17FFE1667B517C3CEE2F04
-:1073B000BF65FC87D4F86F17FF01FA498F1F13BB15
-:1073C0009F58F11F7274FDF414FF01FA1974DEF175
-:1073D000C488FFE0D1D1EDFB8AFFF045DCF9E33F43
-:1073E000FCCBC559806D0A9EFF149328B27F99B8D3
-:1073F0000BD7C6FF93E32E90B1F0AF1477417BBF5C
-:10740000DF60C2F5EA4DC1F7D7845CBC25E22F1CD2
-:107410008B197F217815F94597CBF117A60B3ECE36
-:10742000F3C9F2309DF1F386E953B278BCCC325DFA
-:10743000FC855CF9FC7A86EFC81400C7AEF2C8E39D
-:107440003822E46166C947CF217BAE1E1B3DFEC2D8
-:107450002CC18F621D5DA60BBE158BF47A7C920247
-:10746000F23CA3EC888A749DE96E55C9AFFD038D8B
-:107470007F6E897FB3055C3DBEB304FF665DC9F9CD
-:10748000A7C7FB55E49F13D2B251C43F3DDE7A3CFF
-:10749000F5FC6791FC8E889B51C0E4B80B93AD72EC
-:1074A000DC85A92E39EEC215E972DC852BDD72DC94
-:1074B000851FE4CA7117AEF2C87117AE1E2BC75DE7
-:1074C00028F6AED5C57DD8A48BFB70972EEEC3FDF4
-:1074D000BAB80FDB74711F1ED1C57DD8AD8BFBF020
-:1074E000B42EEEC37E29BFB8E6B0547F69ED1129F2
-:1074F000BFACEE0DA9FEF2E071A97C45FD07527903
-:1075000045C34752BEAAE90BA97E6FE33EBC2ADE03
-:1075100003BF26DE031F13EF81DF8C11F7E1AF3FBE
-:10752000FFE2B6C8F7F85FFEFC9BDBF03DBE41BC56
-:10753000838D15F7215C1E23EE4357FB6F1FF72148
-:1075400025F99FFF0E3FC7CECF3727C44FCAB1A73B
-:107550007CF777F8D716C9EF99E796C8EF9973ECDF
-:107560005C9FCFF3C9EF9AAF2F93DF3597D97CD9C2
-:1075700088873EEEC384786F8E1DF5A5789F1FC265
-:10758000F7A9B0363E8BEF53217D0EE33E407A10D3
-:10759000E33E407A08E33E40FA7B8CFB00E94B185F
-:1075A000F701D29731EE838A712302226E448D88CF
-:1075B0001B512BE246D489B811411137A25EC48D0C
-:1075C000681071239A44DC8810C139E13F44E949CD
-:1075D0007F0BA5A7FCC7283DED6FA5F48CFF34A554
-:1075E00067FD1D94B6F93FA7B4B7712334B9FC33D6
-:1075F000DA0D66EC9FCBB126A733EC033744CA699A
-:1076000091FDA20D28A7B1E245CC459AA6C48E17DC
-:10761000112E8F112FA2AB7DEC781169A3BFBF781B
-:1076200011FF16CFE5F51F8D1731BF5A8E67B06079
-:10763000CDF9E34594D98A56A35C6AF2F86FF1FC60
-:10764000BCAAA77811DBEC8A58AF812E6877015D60
-:1076500068BDEEE1BDFD738E8773713FD1997BD11B
-:1076600079E31CE8E52236BD795C83EBBEE738118F
-:107670003DD155ABFF66398F5FF06FF1E78F5FD07B
-:107680002D4E444FF105067D467AB2B771227A5AE3
-:10769000177AA2E7ACEF394E444F7AB5277DFAC787
-:1076A000E99CCE13E2CF1F8F231C17CEDA72901AFB
-:1076B000BBBC34B555F10EBC60B68BFC27EDBBC42A
-:1076C000BD312F73BB52F93B75B437DBF7240C6720
-:1076D000F47EDDC5BCC09F78F15DD9B57F3F9EA724
-:1076E000DFEA64DEC4248A07EF36E6E03E6CA415C8
-:1076F000FD29158D1FBDFC3B806B6B36D27DB276AC
-:10770000C0A185EC3E6F22F22D9EDD4EFB743CE362
-:10771000FAA64FE47B66DDEF37609588F39BA946B8
-:107720003BED9B3AB7F27B9E4676F17D1347D37DC6
-:107730006A167413FFC84E5D21F0ECC414EBFBAC69
-:10774000643F2E3BFC447E88F1F3CA48BF419F4210
-:10775000D94F5367730EC777952CE06D41FB7B893A
-:1077600080975224FB6F3E5C547808CFE997F84A23
-:10777000E91E425A89ECCF61E2DD386EC7C2F7E5F7
-:10778000009FD226853DA0747F475ED67CD706DC5D
-:10779000E72C0FEAED6F968B7256CEE23CB8EF5DA8
-:1077A000512F973B1CE23E879DD97B45B7D60BEF07
-:1077B0009B987C5EBA7942587F9783EEC32E3BBC80
-:1077C000D88CCCB2A4CB74B3B965BAC5E7CAF4D12E
-:1077D000D3CFE191E9A3A75FC258D9FFA5D14FBB91
-:1077E0006FA832715F34C8EF91767B87DFB48DF07C
-:1077F000D4D34F4FAF510E714FA28B5E45D654522A
-:10780000F98467861A22F9D6CF874C7B48C1FFEEF0
-:107810009F1C5C4BAD3C0E15F5563A07CD9425BC2C
-:107820005D3CCE078C2BCB3C341F70478FFEDD7840
-:10783000F66721F7EFB26F20BDA9F8B9E38BA0740A
-:107840002BCADB08FEFB0BE4AFD27E3781795CB834
-:107850008F6AF05BDD4B543C1764EE2503F13CD09E
-:1078600045E99DE2DD6FFB5046FBFE86D027A978F7
-:107870008E76675EC74CF43F542D6545B87EFDC8D3
-:10788000C9DF5D6C12E90827F7CF6C2E3230EF6844
-:10789000FC1D1E635041BFABCB7BF872B4479B4DC0
-:1078A0006E7A47ECEA78F97A2A1F45EFA3330CB5D4
-:1078B00023111FA84FEF6BDB9BDF752E8ED0C36D9E
-:1078C0004D770FC1FBC5F71BA2BFEB2D7568EFDB32
-:1078D000F8FD8E115D71064A1D63281EC19DD9D029
-:1078E0004F657127F15193CB0982FECF954E27FC4E
-:1078F0009E6C56DCE8AF9B66BCE107C300BF7147D6
-:1079000055AEBFC4BDEED1A2FED3CC938EF88EBBD4
-:107910009429387FC6BDC13C0124717529DDA7FBC0
-:107920009D73DA21E4D7946690279C0F67ED1EBC07
-:107930002A3FA645BE2F9738C57700EF175E728C99
-:10794000913EBBE498AABF1F63C4FDFEB856F9FB85
-:1079500004DDFE739D26774E968A72B7E52B23E1F0
-:10796000D5DEC13CEB006EFB92BE746EDBFE0923DC
-:107970003BB1FD2B6361B4FB25773BB8DFEB7E3376
-:1079800023FD7D7FA99DDE393C5B5A7E01DA179F7E
-:10799000FDC47741343F65849D96C0DF9F7B13D83B
-:1079A0005894C35B154EEFDA8CA228EB9626779A93
-:1079B0001C6AF297511AE78B765F33D9C9EDA34958
-:1079C000A5B98A19E5679FC290AE6DEB00AFF3AC25
-:1079D000DB01B62E13F1A96AFA98EE61599B95A8BE
-:1079E000BFCBF384C3C9EF03AE0BACC5FB1737C3E2
-:1079F00024423D9561AECD8A063FC0B6905DFA80C7
-:107A0000C3CDDF0D58451C21B53603EF23B4354DEA
-:107A1000BE7203E0F900CC07E4EFFD260FE11DA8DC
-:107A2000608CEE930A7F5DBF996CDBE608FB77AF55
-:107A3000A3E030CAED6107B71BFBF83C0AE2EDF9A1
-:107A4000FB5F9D08BFFD730BF1AFAFB037B5762775
-:107A50001D9C3E254EEF016CCFCA9249F9787C4EB1
-:107A6000F7923EE837077A47B1AFB4753DC9C7E82A
-:107A70007C22C96E089272F27ADD2EE9BE7780E62A
-:107A80008D360F584861F85E5FD36F4AB31272802B
-:107A9000DC8FB6DA4378FF2CA90CC69D8CF13CAC88
-:107AA0001C5E8B7A56F66B813CE6A371CFE8BD3F36
-:107AB0003A5211BEA6F7347D796B22D747B7DEA5BF
-:107AC000523CD0AD6AAB0DFDA9595EF7240C4D9325
-:107AD000A4BAE95E4AFF323E0FE3737E9918B603FB
-:107AE00060928FFCDAB820DA7BA60C94A714A497D6
-:107AF000EF4307A4C30F753C8BE682C7C6FAF0FBC1
-:107B000053424F08BB669A58EFC6BD67E0EF284363
-:107B100097B3C8F7457A3D0172FF27FCFD9EFBDF56
-:107B200053294E68583F944EA3F58919871E403952
-:107B30009BF022E3C751423FB8E01FD2E792977C07
-:107B4000EB118DEFAA17F4FC66216B388F3FCD3611
-:107B5000EA10CCB7C875D629D67BA1476E2A1EB8C5
-:107B60001EE797264717DCE231FA22E8A86F1FF6D6
-:107B7000532AD6F077770EEA91978C783FACBD0008
-:107B8000F80D747912E70BD03BF193E095C8F72D0F
-:107B9000CD57D850BE6F0D4D72CD803689D622623A
-:107BA0005E22F3923F270FA8837122D69350C07EA6
-:107BB0005D2DCA72A6E03DAE42C9DFA3FD2E1E0CAC
-:107BC00094F812E603C871E43D564D3EF5F2A8C99B
-:107BD000EF7ADC60E1F91D7ACC21352A0DC4200B47
-:107BE000DBEA423DABD997EBC3F65C22ED33560B93
-:107BF000BB68BD7D9A95D4C0FE645ACF57E3FA04A2
-:107C0000E35F9DC2681E68E3D0CB63D5E706168CA0
-:107C1000D81F54A91D748FAFEA73330BF6C171FBE3
-:107C200026E1B835BA8C1474D1D321DB29F69B82B6
-:107C30001EB1F1CC77E1FDD944AB976D243C27D13F
-:107C40003DE786509E15D7DBDB7478F602BF39D14D
-:107C5000F053ED31F013F1DB2630DFEF5A415EF3E4
-:107C60006FAACBE0EB057B353D827FFA7933B6A96D
-:107C7000FA803962BE687E5DFD3C19D1CCAE41BA56
-:107C80008F0BA90CCF5F7B9A2F9F88F156C5737A13
-:107C9000B5CFE9188CF2B943F5553BC9BE683560DC
-:107CA000DCDFF6A719CD67CFFE934E8A6FD4D2BB27
-:107CB000FBE99A1DA5D94FFA7A9AFDA4E95DED7EFC
-:107CC000F876A7CF8FFD2B4D209F30FEF52EBE2FCF
-:107CD000DAEBF0ADC3EFF130063C4A62B9A12CFEFD
-:107CE000FE5596FF58F21EAF93E706A013FD4E1601
-:107CF000E8FF414A773CB4FEA73813F9790BCC660C
-:107D0000D443FDF219EFAC92D1FDC97EC3990FD7D0
-:107D1000A77E79FCDE5F50ACDBDB84BED5D2BD8EA6
-:107D2000A2FB117F93CA0296BCEF8E37A28AF7B1ED
-:107D3000B73BBDF7A1FC590BBD348E4C17F3A0FD2A
-:107D400099A93628F86E3269A55BE1F7B059D73B9F
-:107D500026809739C35D80729289FB68ACDF1C3D39
-:107D60008ED6134E9364677A58384ED513D82FD8D1
-:107D70009907CD80779F195ADC2BEDDCC6A3209D97
-:107D8000DA1C7308E9B64F156E8F27727AE9F7038C
-:107D90004878C44F15F9DBCC4CB525B1AEDFE134E2
-:107DA00058C98E8F679E06D44B2F3BB3C5B9A8A781
-:107DB00006F3FFAE7658138776C9F19D13677954A1
-:107DC000A8E2BCB47338EE99409E0F23BE6D133BFE
-:107DD00007DF4AC4E818C0E5C66B94E2E268F46FB6
-:107DE0003249F4B7E13E3B520F3ACCB48F6C53E2C8
-:107DF0003C38CFDA962B1C4FC52AE206A9F2FE5F6B
-:107E0000E8234DBF763AB308FF7816A07D00B37A19
-:107E1000AC748F5DE08F7115C9AFB3373EB81DCF1D
-:107E2000A3747114F57116272FB6D3BD8B2D7B6DFE
-:107E3000B42FED2CE2E7F39DCD16D2BFB1E6691A5F
-:107E40002A83F3C40B04BA7520DDD24CD589A8F778
-:107E5000D2E6F3F9AFA7473B0E14F73B7F3005A3FB
-:107E6000BD57D7D2F4F4BEC56897A567A453AA7DC1
-:107E7000AFB3AB51EF611B1314294EDF10E851EC87
-:107E8000738C09F0FD9CEF8FAF7959D7BDF6BA38E6
-:107E90004EBF4EDFF8848751AE40E0E8F704B4737C
-:107EA0004DB19FD7E22769FD6CF15B8B31E467DD53
-:107EB000A2E9365C075298F7CA793829B798D84EA4
-:107EC0006A972BDD77BDD73FB218DF276726F07B97
-:107ED000B49F6C994AEF9953D93ADB60A0436991FA
-:107EE000C183FE80738BDE741A407E1665B6E4A3F0
-:107EF0009C26987C990963C87545FB8D6525E660CD
-:107F000008E8955C070A81E818B892E8B8D010D55F
-:107F10003F9C9DC0F79D6F89F5243D7D40F19251B6
-:107F200091F97E44574D8E60FE642C19DD150F13B8
-:107F3000F87951429479D06E624DF85E42D347C9C8
-:107F400042CC347DA8C97132CE0FB4E38A403F4998
-:107F5000E77D5035B5EBF70C95E617BE403BD6797B
-:107F6000E924D237306F6B48CE73B9FEB4A13E8B93
-:107F7000F05BB5EF7DBD3FBE637AFB671F3BF05DF5
-:107F8000CB5FD40E07EAAFD3B7FCC98171C0DEBEA8
-:107F900085EF936FD4D9FF5709F90826144D41BADC
-:107FA0002EF0FF3D3FD25E636BB8FF7979507EBF04
-:107FB0008AF7BF23FD80150DFAFB00011EA74CFCBC
-:107FC0003EA79E0FEB041F96EFDA66CE7463FFBEEA
-:107FD00039D8FF69B1BF39DDE8A0F7141A3E8B76B6
-:107FE0008D34A3CDFF97668B78A7D762E27AD93B11
-:107FF00003DFE7F804DDF4781EDC174FF096DEC3EC
-:10800000DFAF2E84BED6805EF435F3384AFA712C89
-:108010007DDB3D0DFDE84B3729B48FC3FAB7C03A7D
-:10802000E15BB391DEF1E8C7B93020FB73F4F11ADC
-:10803000B5FDC032C1FF25F86BBC3951E23836F3CB
-:10804000F774CB74F645E7A19C781CFF9A0461672E
-:10805000E7B34B306EE79E43D909D1E26168E95935
-:1080600071DE8FF7FA313DED67944E4970F3785D1C
-:10807000CD476E46B9AA6CDA4DF111F705DFEB3347
-:108080001EAA14347F6144A12A10F6D87C618FEDBA
-:10809000615C6EC08EDE8CF27FF9E73A3B5A8CF35E
-:1080A000064DEE0F2591DCDC80E31A8EDFD54FA262
-:1080B0008DEBEE04F9FD576FC7A58D471B9F565EEC
-:1080C00021DE9FEBDB69723E45C8DD921DC51BFAC0
-:1080D0000229D6EF7D7F8088234771B63439D2CB11
-:1080E000C932C1B7B03C34DF41E3D2F806F29E2E6C
-:1080F000DE25A5A33FA327B9D0F3BFCDD43A00E72F
-:10810000AB9EFF6D31CE7DB627F0738D256EEF34BB
-:10811000F4AF8079B8C115613F9C566B0FFE14E730
-:10812000D10E2EC791EB22194B2F9A689D5DE570F9
-:10813000A725DA05DFC6E1FB454B00EB69FD9CF2A4
-:10814000D7CC1A48E78DB5B3060EA4771B946AE521
-:10815000A5F77FEC44FBB43D97917FA1CD21E37B54
-:1081600004179B319872FAAF545BBE7E0B75D08EAC
-:10817000168ADF7AEA2BE19FF8CA52186D9C6713C2
-:10818000B81DA8DD3FB951CCA31B9BF97BBB455B58
-:108190008BCDE4075823DFD77849714DCB84A6BE39
-:1081A000869166E4B39E1F4B3D57D03BF06E7C61D9
-:1081B000B7135F97EADFB5897B4C0B847CCC74B92D
-:1081C000859DE6A377C44BEA8C64DF2F7357D3FEFB
-:1081D00066851AFD3DD61897E1BCE3D18F6361A394
-:1081E000427A4F8FFFB21D6B37F465387E3EBEEE8C
-:1081F000E308F5233D23C6C95A2FE7EF32C5BAFD80
-:108200005FB8D1C6A4008000000000001F8B0800EA
-:1082100000000000000BB57C0D7854D5B5E83E7326
-:10822000CEFC24334926FF21413C21111212E29059
-:1082300084000171F24BC4080301826075405184CF
-:1082400090207A5BEFABB79990682DFA7AA358CB60
-:108250006DEDFD062BAD0A4880A08126E9041403CC
-:10826000040D820A96D68014B1053280B5587D8FF0
-:10827000B7D6DAFB64664E92426F5F87D69D7DCE9D
-:108280003EFBACBDFED7DA6B9F65ECD94B720E633B
-:108290000FB7CB8CE53356FBACEC65A98C2D63CACC
-:1082A000E9BE0C46BF6BA9F85F67E59204C6EEC550
-:1082B0003F5568DB57553278AE5CAE9985CFF56F88
-:1082C00090995982EB1EEF53C971D036498E4618EA
-:1082D000C71E379EEEB33066817FD746D33C8C25D0
-:1082E000E0FCFCD723B1A75260FEB38AFFBD08783B
-:1082F000EE2CC0E181799678F873F47EF8FF32C7EE
-:108300008C2F2478DFFDEDF229730E5E5D6D32C097
-:10831000F8A52F496C1D8CBFFF69DD78B12EFD3AA1
-:108320001EDAF0A3B9E91981710F7B9F0BE9C3DA5B
-:108330005456C0D87D023EF6EA7F05EE73F84DAE86
-:1083400008C632ED117167B3A05BC0265D4B63AC0C
-:10835000CE1A99C3A2A03533C2233B64F46E02B88F
-:10836000D644C08201CE355BA3BD1EC4E3EA68C615
-:1083700046C0B8F68D26B70DE6C4DFED8C9DAB6F19
-:108380009E9B9E0EEBAF7F7A6EBAC2D82CBB9DB17E
-:1083900089408FB6E7685CB7E29A6487FE2A4BDFB4
-:1083A0008FEF5683F03899D363995C696286C07CFD
-:1083B000FA7659B3F1CBBEA0751621FC56F86312BC
-:1083C000C02FFF3DF8D5C4685B006EFDBC7FAADFFF
-:1083D0001002F74A85395B6C81F568E326DA0DB443
-:1083E0001EFDF37A7A30E6A5717ABAAC443A04D12C
-:1083F00017E15400AF3D1D56EF5A89F888E0F67436
-:108400008411DC1793D6CD3D93C7D8617C00E0AED4
-:108410001DF132F55F515C6E7B3C5EF48F728DC74F
-:108420006762199B323CDE6046C6607C2ECE0FE34D
-:10843000768539F3988CD75DB1C807D31BFAAA2C7F
-:1084400040AA3AFBA40A05DE33FDB9BEAA30E83FD4
-:10845000629FCCFB9BFA8E5A1C8C35B02915A5F077
-:10846000FC63700FE7BB5E9B6F762D66C05735804F
-:10847000534B0CB4C7C6BC8DF256D35B5921454251
-:10848000CB984FCA057E7046FAAC39D4678530AEBA
-:1084900033CAFD1FB8BE55579B2EC938EE98C2E5AA
-:1084A000A53B8EF0A000EC61F05C53B853B503BE61
-:1084B0009A622C8EC654BAEE098BC1BE535583AE58
-:1084C0006BF4C0E7108E2603734643DB75604C5493
-:1084D0005FF6F078EBAA57AB14A0FFBEFA0C6AF572
-:1084E000F78B4CF674073C5F6460EE16DBE0FBAF85
-:1084F00022BF109DD414A4736DB789E41C7F12F0C1
-:10850000FD2AA1876A81405100CFAA63CC171E893A
-:10851000E3CABF50B06D95D8E910BE6281BE3C3C45
-:10852000DC37DAD6E27C4A309F703C152BA9554ADD
-:10853000D07B4B6D99217D39D19081EB6172B8630D
-:1085400013E0574E31ACDE01EB976F8616F0A1D8E1
-:108550001DF212689B4BA6CB4BA16D34B2852DD872
-:108560001AD8F2603C750879D2DA4B76D76F90EE64
-:1085700017DEEF2DB0929E1A6927F916EB6D941C49
-:108580003ED4439E2EE6D804D79A6417E37CDCC21F
-:10859000908F7F2FE671980D3B55E0D7F7EC0F12C7
-:1085A000FF3AA20C8FA642FFA3E615150AF0AF23EF
-:1085B000C570251578F478F34ADECF325C190DFDCD
-:1085C0004F9A6B787F2A4C99CCD8C9E655159E6C8A
-:1085D0009C97EB31B6C59985EF510C12C9A9B2D75A
-:1085E000E46D843F9B22393F3519812F6370BC4A6B
-:1085F000E39F6A28DE6C05FE578A9DEA6A1BC73531
-:10860000F2C3FFB4D5F0285B0DAB118FD822BECFDB
-:1086100088756B7460ADCEAC39A8175A9C5973231A
-:1086200010AFEECF11AF793DBDD3510FB77EF049FA
-:10863000813B9BD30BE7C9EB612C12D673E1AD9B59
-:1086400036CA52803E97EC45E7515F4BA0A61F8784
-:108650007549AA9DDD0372D7E864AA09D695C85E5C
-:10866000B2A3FD30207D4005B532AE5F3AA35C5F1A
-:10867000E2736CA48FEC4CB5DDF515BE5FD3CFACC7
-:108680003766483DACD757A69CC765067C1093D289
-:10869000767C29EAF3DF9A1DB7A8088F933D0E7008
-:1086A0006C333085C5107B642870DFCAC21DEB5067
-:1086B000DE1D2CC903F2856823E0E01707F6D028F9
-:1086C00064485B073C5FCAA09D8470DD4AEB9291D1
-:1086D0009F2630978C7AAB8079ADD8F677BC95849D
-:1086E000F87A3E8CDDE782D6F22A737A83F4467EEE
-:1086F000B444F89F1563A436DCD83217F934FC1261
-:10870000B3A31FD0FF0B9382F38360DC89D71DFBDB
-:108710000D0CE1FCB5D16B8F82BE3F53515F66817A
-:10872000F9FA059DB5799F37A999D1D0AF8A9108FB
-:108730002FBF2EE2F6D8FF85C9FB722AE2C7B2DA54
-:108740001B2457E3A3F9B8BAB8E2B1D1F07C4B4788
-:1087500038C3F74FEA0C3720FE376FC90D433ED8B8
-:1087600086B881F5C798ED8FE07C315700DE54BAAA
-:10877000EE24BC2AEA8428C06BE14C9BBA0EF0FEC2
-:10878000EBB09699C8F7FEAD06F632BC629BC931D4
-:1087900007FBDB2EAB76D4B3BF4E6D09A7F56C3566
-:1087A000D07AB685FBC7AD01B8D7652815089F629A
-:1087B000650AEA5FC550AC3E02D7A74573FDA8E93C
-:1087C000E39A6895FACF4BF0FE5C1C57447253262F
-:1087D000DB48DEFAFDCC6B86F7C4CFEB95911EE14A
-:1087E00073809590DF159FCC703E17121A5A9BD15B
-:1087F000AB929E75DA9600DDA70B3D3BFD644D25DF
-:108800008BC48EE3D854986F9FCDC8705DB7B13ECE
-:10881000D902FDDBAE32870FF9E7AA427E981DFE32
-:1088200005FB7B65629E5F494C898271455FAA0AA0
-:10883000F257110BF5DBCA36947F81F6ADC4A2BBAB
-:108840008EFE5C24B64AE03ACCB3285AF861A3D82D
-:10885000A86BA4CF60D6046147555C7FF67FE1BA70
-:10886000FA2B4C0E5CFF769BF3E3A9A8077B8D6C7B
-:10887000131B5E8E7E550F1A7D0C08C7D570E68DD2
-:10888000253EB421FDC76D68F684C17AC7A5F3F90A
-:1088900091DF506F8CFD455C2CEAED8868AE4FB4DB
-:1088A00056E32FE4237B14E723FBAD01F9FB5E7451
-:1088B0002A8DD3E409F90BE7D963F42E760D6117FD
-:1088C000812FBF877CB9DDC62A90CF9F1961598857
-:1088D000F2A4BD67B7E07B7DFB54C39A2E23AEFBA9
-:1088E0002FA0FF01EED2E4ABA660FBDD15C7E12DA2
-:1088F00093BF25BFFA62BB44FE7C423BD7D7C17C05
-:10890000316268BE7801F17A3DBED0C7011A5FECD2
-:10891000B81E5F74FF637CF18B68E1DF0ECB17DF5D
-:1089200046E2FA1FEB2849647FC78F69137C30DC6D
-:10893000FD2956AED7F4D7DB053E779B9AEFCC41A5
-:10894000B9BFCBE040B906AAA7CC05FBB23B9C3F20
-:10895000C794D569D8DFAE703DB2BDDD4C7A64BB3B
-:10896000CDED267B9D6461E82730C5DDF77DD47FA2
-:10897000C916755D10DF3E2EF4408BD137E573F4D8
-:108980007F0F70FA4EBE2B5736C1B8110F70B9CE9B
-:108990003F67DA28C33CD53145BE6818DF17CDEDF7
-:1089A00062DD1918057C597BC644FAEDADCE23E58E
-:1089B0004E1BF9374EE4AF497B8E941767E378CEB0
-:1089C00047DDA2D5FA53704D3164768E25017E5D68
-:1089D000C24E4C615C0FB9903F72027DE634523C4E
-:1089E000A6F1413563596827E6F639CA908DAA2A5F
-:1089F00042E95BED9B4971DFFCE3CEB20858D77CBE
-:108A000097EEBEA07FB58EFEE007FF01E564D5E6D8
-:108A1000DE4E1BF2ADCAED698B697516F77B56A762
-:108A2000A1FFAFC911FD004F2DBFCF78795D901D1B
-:108A30005763F83A9F752874DFD367F2DE0297FE1A
-:108A400037E3CFB5087BF3AD90E3DCC7DE588CFC91
-:108A50009BB7DCB90FF1BF284EA6EBFFC97C96345B
-:108A6000A48F4321FFABC5A8967C2E05C631C595C2
-:108A70006183FB7BE2C3F3F0FDD531EE6B4827A6A3
-:108A8000F8BBF1B94985B9792857B6094DB1687F66
-:108A900034B801AE8A4DB6001C1A5CE785FEA98E7B
-:108AA00059720DF180CFA15E693B75D682CF6B7490
-:108AB0006FE9B8C4E91D447FA47780FED27DD8D782
-:108AC000F06011ADD6FFE7E9EF1B89F41896FE18A8
-:108AD000F747FE8FE83F2A6608FA833F958ED73521
-:108AE0007FAAC5047E7576A0AFD1BDDA5E44E31CD3
-:108AF000265819FA4F9D1057A21CBAA3D1B9613B51
-:108B0000EDFC5DFDBF3F3B0A5C4036292686CB93DA
-:108B1000C93F06FD8D093E89FCBE0920F0F7909FF4
-:108B20003592F49D43E0879D95A4B319DC05BF966B
-:108B300082FE9F2F16E56082B9D287FCBEC33A3D04
-:108B400005FDB75CEBB434E4A737331E3B8426E75E
-:108B5000CDE4E53B5F51037E8EA6D7F68969B5F774
-:108B600097C770FADF0E6A16FD3D740D83E1D0F4ED
-:108B7000379205E1907CD5866B56D2C7ED7D80AFEC
-:108B8000DB110EC06B97C45A517F17199C7125E8F1
-:108B90008FC5FB14EED77D3D4A05BEA96C7FF73823
-:108BA000C25B69B1F930DFC21CC6F37D41F912BD69
-:108BB0009FABF9259ADFAFF92D5A7C89FE0DDECFE8
-:108BC000C7EB00BFDD0C00A2FDF159BC0DF0FEE7C4
-:108BD0002FAB994E21AF0AACA352AC6336EB25B84C
-:108BE000D8B7D7AE4D03FACC12F8A8EC86B8300748
-:108BF000EF337617E0E12E85C78B7739203E0CE204
-:108C0000A3D99343FBF89B9E1098E77AE3F5FA7F8C
-:108C1000AAC817FCB371A6D676831D3A0D0C70B0A6
-:108C20009EC73485A3658F82F1803BD380FC582793
-:108C3000EC1A84C943DB2321AF8586BE1C07E0B74D
-:108C40006BCF3764FFF6EEF9E623F4E7A67CA1309C
-:108C5000333C5FF8457E14EA07E60A9DB7EE8FAD18
-:108C600056C6AF13FFD48AB5EFAFC78C18C267A141
-:108C7000F637E79F5F8FF37D7946E1BC2DDE5F6EAF
-:108C800072A7DB6DD8F2787FBFC4FD1DEDFE7E2399
-:108C9000C00DD737C568717FAF42F919F89983E8DD
-:108CA0007C17C6FBB901BADE75AEE20B2567307DD5
-:108CB000F0F7FF23DED7E2FCB744FCC0F69D30A9F5
-:108CC00000D78CD64714F4A36724C9CC19F4DE3B33
-:108CD000542B7306C5FB6FC4E8FC907DAFAD9F05B8
-:108CE00076A4AE477684A1BCB66F3F9483FD5ED96F
-:108CF000611D828FF4F89DD1FE8882FC9F10CBE528
-:108D0000E67AEF2F1C077C722BD29D911F77B14022
-:108D10002239D2D377EF9E9FC7F6650F8FEFE1E838
-:108D2000AFA7C36FCE1747215EAE470F3DDF76C2B8
-:108D30003A3DB03E1FACD303FED6DE7A3BF5DFAE44
-:108D40004FA2BEC6AF751DBF8C457F4DE3D3B25851
-:108D5000CE375376AF8F65B600BD347C5D1474ABEF
-:108D6000668EF9B3E0CF5D922382F48487F52615F1
-:108D700004EC55F5B172F233347B552D671B51FF6E
-:108D80006AF60AD3C2A8CFF4F6697E7A9111D5AA01
-:108D9000DE2EC1028DC8BFD50B43AF57F4342B1163
-:108DA000D433109D2449E043F8D51A3C1F3217C133
-:108DB000ABA7A7069F1E2ECD9FAE1674837596E1B6
-:108DC000D2E7AA45B48E417655ACF746EDA93936BF
-:108DD00034CEBA72AEF4FD9C21F87538BED5DFD71B
-:108DE000F44039BE20975A0FFA1109B10944AFF285
-:108DF000AB26E6047BC14686B1CF82F3EFAF649227
-:108E0000BD7B54D8DFE1F8A6F6AA81B96303FC6301
-:108E10006C7BCE8AFCB35B69B662DEF136DB9CC646
-:108E200028C053E91F8BE7A15F57D76760989A2A3C
-:108E30006BBFB40FE3F6BAE3CC81FAB0B8BDAB04B4
-:108E4000F9ED6DA557A638FA4BC69E0BF20FDBDA8B
-:108E50001BADE83FB5C5C914A7EF8FE6FCA8DD6FD1
-:108E600089E5FCD776E6F22CE710F73F13F74B4F76
-:108E7000E51AD148F6C74750BEA1FC6903ADBF54FF
-:108E8000B25755A2FF718791FC7A885BFEF07DCCCA
-:108E900037B599B763AABEACED878FD881102DFF87
-:108EA000E7B30633E60FE6488E97615CB9EAEFC296
-:108EB0007EF9BC54DA8799F47F65F25FFD774B94B5
-:108EC000F7280776C17EF93DA95ECC3FEC9178DFAB
-:108ED000D3C1F3FECCEE899D05EFF9A03276C23AFC
-:108EE000E229AD7F4BEE3A261838289E7A6C17DFC0
-:108EF0003F7AAC4CA2FDA3327B0AF304F155F9D3BF
-:108F000040CF3CE0C7F6C462E4DFAA0A997983F84F
-:108F10007ABECBCABC41E3F7877178FC92D98BF952
-:108F2000124D5E670AFEAE5E181B327E0EE37EE2D5
-:108F300042D66C44F9AE13F0D415013CF0FC4C1150
-:108F4000A7DEED4E09796F256641606856DC68B290
-:108F50008FB3BFEC23B33A473E796C31BC87657061
-:108F6000F9D0E4AC4CAE69223E48921C181FCF9752
-:108F7000C0AB9451DF85CAD1ECC9A1FD394EBD7E8D
-:108F8000089577BD1ED7E47C7E876CC4387A7E91C5
-:108F9000E46043E803BD3FADD703930C8E7730AE5A
-:108FA0009E7BD549FC35480F9CACF887F4C05B200C
-:108FB0005B93415E7FA4E9839BD84DA80FCAE42D43
-:108FC000EB913FFAC1AE9987E00FCD2E68F176396B
-:108FD000C827F2033BCFF725CAAE829CC606E2ED56
-:108FE00001FD007E8363087FE657B16921FB4903D9
-:108FF000FA22C86F3016FCF37E4319F88BA65C8406
-:109000006F24F3E4919EA2FC1EB43ECAB3255DA278
-:109010003C4A1DC4F114CFB35F125CA8D7A49800DA
-:10902000DFEBFD092D4F3B42E409F4FC3090B79B88
-:1090300067F4229F69FC506EE772513E4FA6FCB95F
-:109040009E3FB4F75D8F2F7C12F085F477F842C80D
-:10905000D38DF2C5218D1FD259FA8DF083C6071A20
-:109060005FE8EDC5415DDE65387B71F23AF6E29D61
-:109070000C23E965BD9DD0ECC28138AE7FC7C7F235
-:109080007D8A9999F36DE8578C407D80FE9EB037BC
-:109090000379A30D9C0FDEE95BAA486837500FA443
-:1090A00006E15DE44D35BEAB7D9A51FEB052E89FBE
-:1090B0008B1D3C9F56572A7B2DF06749FB73EB793C
-:1090C000DF48F9B622A54BB1C0BCB31D9203F335FE
-:1090D0004E917F9B75D5E455293F3FF47E7A95E00C
-:1090E0001B8C7370FC6CA7E4851074901EAABACA1E
-:1090F000EDBE5E1F5589FDF22ADD7EB9294ED0F501
-:109100006676F3BFD2EEC7C72570B919868EDAF33B
-:109110001A1D35FA4DC0B1283FFBBE36A911DC3F00
-:1091200046FACDB8AAD03CA3E242FD962FCFE7FE87
-:1091300027C574627C5DFB25937BFCF0F05FCF2F2D
-:10914000BD59F3C3855FAEBD7726C8780A3A863A23
-:10915000FBA1BDE7BAF6423CAFA7D3E4B8D0784252
-:10916000A387A64707E15BE8D9E1E8753D3DABE998
-:10917000B37FB59ED5E6D7EC80F65EBDFE1D2E3ED4
-:10918000D3F4E9531B0D9417B94DC4C1B7893CEB17
-:109190008342CE970B7DDBFF178B01FDAC6D9DDC11
-:1091A0001F7198ED87D06F08E4F3385D9F8C601EC7
-:1091B000DC2F674AAF85F62F8B81A4B87F99CCF757
-:1091C0002FB7283E17E96987C21A405EFE2AF216B9
-:1091D0004FEEF52C463DFDE4E93106DA47577CBDFC
-:1091E00018174FCA55683F28DAAC52BEF76287D9C4
-:1091F0008ECFF5EFFE5E9711E7F90B7360A8F67658
-:109200008779603F06F54299DC23635EBEDF0FBEBF
-:10921000388C9FB6D05782F1CE6DACB711E3EA42DD
-:10922000A4E310F47B55675FF479FB920EEE27956B
-:1092300044F0BA9FE980467CEFF43613F985D7CB2A
-:10924000DB177DC9C85F1A94AF6FE37A0606119FDA
-:10925000DC68DEBE107D3DE0E39FE8F40E1B267F58
-:10926000BFCDC4F773FC478C0CFD5E762E6EC8BC78
-:10927000CBF5F2F8BB3BC39D6A24EEBB71FF7C7754
-:1092800067B253CD197E7C4E9FBF18F395DBB6CCE9
-:1092900055284E14F9CF41FB223AFCED9058931516
-:1092A000F369ED8E528C3F86DBE728F63B69DE1BC7
-:1092B000C51B63CD9CCEA27EE9762163DBCE863BC7
-:1092C00091BFB79D4D76223CBB057F6AFCBEFBCCAF
-:1092D000E570DACF343955DC07F6475B1C2F13BF36
-:1092E000723E6F1931C68BFBADDB853C6C0BF71FF3
-:1092F000CC8A0BDECFE0FB179DF59EAA33E9B4DFE5
-:109300002D61BE51DB27F680BC505D4E0C237E32B2
-:10931000B21686EF6D74B29F633B7D9A1A85F8BED4
-:109320001CA7ED47AA519467F8F64A816BFC60BC14
-:10933000EFA877513D496BFDC22A05607CB3DE4D35
-:109340006D5BFD726AF7D4AFA6FB6B0F453E8E7660
-:10935000BFCEB9A04A09D21B9FC5F3FC526ED6E915
-:1093600012E473F60D6318EF4C7FA24F463D71FB7C
-:1093700055584748DD887219F14CF9CBB4403F5538
-:109380005A12867C79FB55E8078D97E2A3391D9A1E
-:1093900094A65B0A485A881FC2E29D17E3E0FA0FC1
-:1093A000ED2E7F5C3CF241F5BE0B8CFA97F1FA0E84
-:1093B000E96EF9028CCBF31551DE380FF3C6B934E0
-:1093C000ED62C4DFC42E13ED7B6BF9DB5C31AFF3D0
-:1093D000ABD03C729EC8DBBEC9FA289F9C6F81C08F
-:1093E000CA807071FA39A5F94912E6FBE24D0EAC5C
-:1093F000579898E6CAC37C6B573CA3FC695757C281
-:109400004815F0E054785ED7A9E575D9DFCFEB7643
-:109410007F1AE9217D057E0AEAA7EEA3910E1FEDD2
-:10942000FF59C8FFDB810F627D4338AF1760F3E659
-:10943000511EFD760B5F07D89FF878CAFBF9F61D21
-:1094400086E77E7B99F17DC4DE93B43F5D62C84CB4
-:10945000EC0338F74963A3B07DF1D3C86C6A8F463B
-:109460009E47FC741AAC2ABEF7C37A56857567CE40
-:10947000F76DB49F31FD7D9B82EDE1FA3EAA477BFB
-:10948000BFFE1CB547EAFDD41EADBF4AED3B701DC3
-:10949000F9E7103C8F6DEEE2087A6EC7A20813C29E
-:1094A000DB19C9B668EFC17A335FB8AF1593F9EF2E
-:1094B000C57FBECE7213D83BB37BBC3481B113F1F0
-:1094C0009FCF54A07F68C6A87FFF0BDCFFDD4F2E27
-:1094D000ACB3005CF38EDA5A7BA0FFE94F2EAEB33B
-:1094E000A19E3D140ECA0EF546FF41907496873634
-:1094F0003D9971053B19FAB1A2EFE99F590A245F22
-:1095000050D297C580B5A6FCC43FD302785C607585
-:10951000FF1BF64D9E976696DE847DE6C17A2EBFD0
-:1095200064A4F89E8D94E2B07E6599DD7D2C3EC8E2
-:109530007E3BA53FD2FE51815362D1714457DACFB1
-:1095400062F653B1C1F2B6CC5E760CE971473CDFEE
-:10955000BF9A384D7206D749E8C74D3CA396229D65
-:109560000ACE9537613BBB229AFAAE85939A509EFC
-:109570004B6DC33D5F42CF2F8837127F162B524869
-:109580007D887E5C1E3013FAC7FE03E1941798783D
-:10959000CCDD8875A36549A9B9B2D0798CFAD11B05
-:1095A000711F6D62E587A5B1283F36C981E6A180AC
-:1095B000F535C5C661FD231644E1BA9E2BC1FA9D5F
-:1095C00089AAE440B41539BB5AF1F9224784A308AB
-:1095D000FDF1636A299A9CA3CA84C3F9306E46BA26
-:1095E000ECB0C044477D774CBD00FDA28C28CAE397
-:1095F0001629ABAF1CA67E84A341C5756CFC792DE2
-:10960000CD63267BBE6356C97F20FF14BBA228E72B
-:10961000576A3B3537B82E0CD64D7017D9656F9801
-:1096200084FCFD83523BF4778C9218CACF515FE6DD
-:109630009FE97E77B81A0680EE30D94B71BE1D26A1
-:10964000C9BE96FAAE121CEF196354314F541EF77F
-:1096500045C8FC334AA5296710FEECA80978AD621D
-:10966000E4A590FB3D8BAC64272ADFCF267FA8675B
-:10967000510AD98BCAF7A71563DB63E07E7AE5FB55
-:10968000951574DFC0E3DFCAC5DF718A3EC5BB959F
-:109690008B5751BF4B4AFC777CDF95ECA85CCCA381
-:1096A000CD4CFF7AAE12ECFFADCE24F9CF1579BCCC
-:1096B0002243E6FA6900FFA307F83E4465B6145258
-:1096C00037372BFF54483DA86BDA1721FDB9A59712
-:1096D00042EA43E7557E1DD25F304FAA0A1E5F7AE9
-:1096E000209FEC6BBEA85FD2F24B458285DEA9CFEE
-:1096F000A82A05B93C00ED03A01F8A7A45DE55E192
-:10970000717506FC433D586AD3E577994AFBD91534
-:10971000DD7CDFBA3CCE783AD83E54C84F707F41EA
-:10972000B7FEDC0346B293B9D132E5AB34F82A4632
-:10973000863EAFF95F1502CE1D0677530CE5C79C38
-:10974000BDE87F68F06BEFD7E0AE90EF29A5EDBFE5
-:10975000EBC0AF87170025FF4D0FC78178118780B9
-:10976000BF41FE5937AF4B835FDC50765BF3CF2BA5
-:10977000414F4507EB299B1487F576C3E9296DDE38
-:10978000E1FC306DDE6576173DEFDCFAD9D1423968
-:10979000A89F7A2A3626B8FFDA67EB43EEC79FAA5E
-:1097A0008A0EEE6FFAAC0AEF4F57D4461BF0E34136
-:1097B00026393CC89F3DAA82FBCF25C79C4DD89631
-:1097C0009D746399299B71C6D384EDD4F3DE1E3357
-:1097D000ACEB8E0C59C5B85DF33FF4F09A13781CCE
-:1097E00072F0AA6AC5FDD31D1ED58AFEFB8E2754D2
-:1097F0002BFA1F3B9CAC02E331679A6135FAF3CE3A
-:109800002C5E677855E8E16FE2F9F35A7B5A717F75
-:10981000837A11EBC2D127A8FDDA4F75E007D1AFEB
-:10982000CA1EEC571D54BC367CDFC127BCB6E07D98
-:10983000C21BF5ABFE8C363A1EF96C4E887C9658EE
-:10984000EEAE0A96EF32FB9290FB9FC6A904FF8C06
-:10985000A48743C6DDA13E12D2077F3103FD9146A6
-:1098600013A33A598F81D7C9EAF1F8A8C0A3C366F8
-:1098700047378619E354AA6BD38F739470FCE9AF12
-:10988000A727F0B86823C80CB6F72470F8F475B1B0
-:10989000FA3EC47C0B713E983909F9DC61355C01F4
-:1098A0005797391392EEA47AD93CC3A369D0AF4E2F
-:1098B000C8E2FDA9869D581F7B774236EFDF6AC854
-:1098C00033821FF02B36FE4EAC07AF0D13759D0F84
-:1098D00024D27E9816DF2886532F2EC638738F9198
-:1098E00061FEFE1913D8BDDCC0BEB9D5CCE352ABC6
-:1098F00089D76D3F957AF429D41B6A987B7A02F94F
-:1099000051C52AE2EFBCDD42759D8FED2E4B44FA26
-:10991000DF93C0F35C593BA726A17EF917BC7F56A5
-:10992000C2C4E1DF8F75BE38CFF91D59E47F67DD12
-:109930000CE89502F887F098AE87419840E72598A3
-:109940003309F36C8DD1269AE79E04CE7F37DA0E69
-:10995000AAFB8D32ACDE0EEDFD82FE0FE07B095FCF
-:10996000FE51737063CEEE1F35773CEF237D653972
-:10997000D78F7EACFF3B11B4AFC246FA69FFE5E377
-:109980007BB21CE89F7E12CEF1B7D03BBAB14FC577
-:10999000FA0DEF4D582F9191E8AE453C2C327B6F7C
-:1099A00021FEB1AD8EC0F96FB41E78F07B2180042A
-:1099B000FA544FE1F4D1DE0B38B5A03DF8589C03C2
-:1099C000D1E080F7FF00F9408367000E5D5DB89637
-:1099D00067AEFBA381F20C7512E83DE8EF3CC91CB1
-:1099E0001E98E7A2E6AF8BBC266E45E17BA61C5E07
-:1099F0005A628336BF6D258F737B95903CD7A4E365
-:109A00008A7EBF83ECD654ED795D9E71AA886BA7E0
-:109A1000EAE2DA1713849D4966C9C1798035226E5E
-:109A2000B8DC333A0AFD4CD45132E0D5A4CA6C728A
-:109A30004C40CE5B21EE674171BFC667E38FD9EF23
-:109A400047B8C71F63F7915DD7E61DC82F70BC5C90
-:109A50003ECEF132A12FE3A7D3A06FEC3632AF1A7E
-:109A6000584F2107955DC6FFE078BBC98B75CB05C4
-:109A7000077E99E7834BE624035383F010A68633D1
-:109A800035482F5A336242FAB2866F61CFF3C4FC75
-:109A9000118EE49079F6C49477A37DCFB32D27FB84
-:109AA0001E357974C83CAC4709B1F3B028DABF9CC5
-:109AB0000840FD0CF05A704C09B1E793E23CB862E3
-:109AC00036F9A4A2B3FFCD32CA41E199D0EB0786A3
-:109AD000A3CB70F863393F45FFEE1FC55FB4331465
-:109AE0007FB115A1F88B7785E22F7161289E46B86A
-:109AF00043F192B27C5CC8FD9B56E786F46F7EBC56
-:109B000030647C2A18A4E07EDAD33343C6DFD23C2B
-:109B100037A43F76C3A290F199DEA521F7B35E5D2D
-:109B20007143F41EDFB226649C9EDEB7B6FDAF9093
-:109B300079357A7BE0DFBF82DEE6C4507AA70AFD82
-:109B40001AEDE4F565FD46DBD312E8234C13A15E64
-:109B50008B6E7FF76BCC43788A55AA9FF3CC64B4A5
-:109B60000FFD82EC92500FA5C0148634AA5FA7FAAD
-:109B7000BB1F1B0C21FBE28989DCBE2726F27CCDB2
-:109B8000CF4DFCDC520AF88F64870C2C102F031E7B
-:109B900022315EA678FAC7CF60BCDC14DD97A14203
-:109BA0007C6CC6FE4D017DB9C8AC36F6013E26C8B8
-:109BB0005C1F829E4C4B84F93F919E30723FC26382
-:109BC000443F22C5C23C91B9643F287F1CCDE224AA
-:109BD000ACC78F0AE869F51A106BDF8A2C3A07F5D3
-:109BE0001E4282FEAF2586ECE8DD9A7E5A9E49FA37
-:109BF000E9B22DD40FBBFC401A5D3F71AF99F6FB63
-:109C00004F883A446DFDE784DEFA53BD85DAF3F5FB
-:109C1000F6103DB67CE3FA08F41F4F64707F51BB29
-:109C20005E82789B88AD2CEC9AC58EF9AC7BC038EF
-:109C30004701BE5775F7452E62E43716E3BA6B3716
-:109C40005EB9F74DE8D719FC09DC3E7878BDCCC782
-:109C50008CFCCFEA6F5888FF343791C7E973C5FC95
-:109C60000BA0B1039E1600FEA3B17D775A39F227EF
-:109C70005CA7F369B3BB19D59FCC71A7D23EE35162
-:109C8000E6F8701780F89D4495E09CC75CB45FFFD0
-:109C9000D1BDAB2270DCC07CDA3CC028E86F7C1CF4
-:109CA000ED312660DC7F1BAF6F80F759F0BAEB9E79
-:109CB0009427D10E69EFFB88B92F7C88FBDDCC415E
-:109CC000F36AF3331613A29F762C5FF9692CBC6FED
-:109CD000CD0103E513D6749829EEEA5FF1D7AD2FD5
-:109CE000C2FDFB52FA6E42BBFCC98A6FC6203FDC44
-:109CF000BD01F410ACB130CAFD7062509C72E281BB
-:109D00002B11781FECEBA617D1386E36537DEF2759
-:109D10002B368F09F6471F4D2CAAC5E7D8E41B3B0D
-:109D20006F58F27A6622D563097E7A58F0D39AD7B3
-:109D3000C6921FB52662809F787F13AFEFD0D6F111
-:109D4000A1E0C715AF7F5D107CCE7407F0913A8615
-:109D5000EF6BA920533B7B2EE7E0FD57147713C22E
-:109D6000D779F57424F677BEF737829FCDBB31786B
-:109D700051063D0581FD65EDDCE5C2F6D83CA43B0E
-:109D8000C85933CEBFE837AF5DF81DE2A763F3A62D
-:109D9000EFE3981B3C7FC9847D71083C807DA1F86E
-:109DA000A09F85F3731D428F2AB8839E86E7991C76
-:109DB0002AF1B3931DC27D97C62E03C3BA9548DC22
-:109DC000B409CAB345CA06CD08392D49A09F855E9E
-:109DD0007925F1E49D4DE4E787FA3DF96FAF08F18D
-:109DE000775CF08FFC9D97DC8D9807BAAEDFE3338C
-:109DF0002C3145DDB8FF0381B0532A105B38F06B7E
-:109E00004B14FB22420F77A21C61FD3FCE85F97AED
-:109E10005F383F670CA602F5F80F604DF8B0294592
-:109E2000B4D2C50C0BE8C5BD897F78E669D093969E
-:109E300074BE5EEC37E2DFDD9CDF06FCABB7C7919A
-:109E40009E62DFC2DB100F225FA1A7533EC8078BC3
-:109E50000D9233F1BC6FFFDF22314FBB35467D1FC2
-:109E6000E9E03F20D33E4D98D2678A1E222E7B1315
-:109E7000F59E89FB4D546FDEC6F38116D5C9300EB1
-:109E800008B3DB27049FB36B17FA6ED5FE4F4699D4
-:109E9000800E170C3D91D9307FCDAE1D91E8C6DF05
-:109EA0006B747F8A7CB7F2C40705763ACFB671141B
-:109EB0009D03F08DA6BA83F10AF328B983E1A8DBEC
-:109EC000904BC6B8760325E3D9F8F6BC87501FD56A
-:109ED000F9F83A716E2CFCCB6C63D4BFD8D61883DA
-:109EE000F3D5FDB62319E567733C8F135FBF3A8E38
-:109EF0003FAF3005C77F99182DF8D96BC03863B3D1
-:109F0000884F2E5E35D038EDFDE3DB8A643BF043AD
-:109F1000B6AF792FC543ED6615E91AF60AE37868FE
-:109F20000F2339AFEB9CC1309FDF1FCD1C12DCDF4C
-:109F30001AEEFF039D33EB30AB981F0DB337B31808
-:109F4000987FABD80FCD048EC2F34ADA75ED7D61F0
-:109F5000ED3FC55802F981F2B4614A33BBCD168C8E
-:109F6000E708C2733CF2533CBEC767C0FC88FF16CB
-:109F7000C65E26B80270327AAF066726F9735B4D6B
-:109F8000FEB3787E05E0B223FD33198793B58F5574
-:109F900031BE0FB33B691D6176D5E19106C355977C
-:109FA000C3BC68BF7FBC960DC82BCA6F5D78A06F1D
-:109FB0000119D83A9A09F9B63F5B3A2DB80F8A646D
-:109FC00072E0F9711B629E6D1A49718347C638169B
-:109FD000DA88185CA7CACF3B636A2897E301F7C504
-:109FE000AD167E7F603CF0B70DFB363ECE1165B7F7
-:109FF000CE94484E28AF572BE4FD31C977F67690C2
-:10A00000D3BFF8F6E6A8004BCDBB7B884F571ADAD2
-:10A010005F1C0FF7375ADCF94980CFB74E1AE81C9E
-:10A02000E99F5E0BF35662FCB87B63827308F9D03C
-:10A03000CFFFC3E36B9F4F41FAEF9654CC9BF61BC7
-:10A04000FDA310DEDAF6CF4D548FD0768AEA938ED8
-:10A0500024B99DF89EC96D0DB46F3C8535D3BE7192
-:10A0600096387FDD92C4F5C7E563635E6E08C2FF74
-:10A070008349DC0F637EF7CD2837ED423E3BD12F7D
-:10A08000817697F08F7675DD9DA606E5FD1AD8DE00
-:10A0900014C4F75AF636B5DAF57E2F3FCF98F5910E
-:10A0A000E53E6710FFB993B89FE716EFF327B9179E
-:10A0B00024A1DC769D3645AA785EA56514DA911652
-:10A0C000F09FEC43E065406E757254A7F84D38BEC2
-:10A0D000EE1C3F770A746EC2FAFFCD1FB58D5B028E
-:10A0E000D77701AEB1DED373C24C758FBB8CAE1483
-:10A0F0001CDFF0E15739A8B72A1069F0BFAF3A5614
-:10A10000DE8C7803BE2F0E47F9DACE488F69F299BC
-:10A110008DF209CF6723DFE7633F93F4F056532FA7
-:10A120003FF7B98B9FFB04BE273900BEB7A39F90B2
-:10A130006D0739A0E7C7927C6FED35D0F9540FE871
-:10A14000F15BA85F5C85FDADBDA576926FCCC3E7E2
-:10A15000A29CFAF6D23C2D108320E924E60AF61FD1
-:10A16000DB1323898F35FD783091EBFF960C350A90
-:10A17000EBFFADB21C2217417690F7859DECDD50C8
-:10A18000FCEC0BD3D0DE09BB20FC27769CEBF94717
-:10A1900085AD5AF34EE1EC2DB0CE3587E5817A6E70
-:10A1A000F4577D824FF60AFF15ED849AC7EB67F0EE
-:10A1B000FAC40DBCCEB5C0B9BA04CB38265734EFBB
-:10A1C000C3B6D0D55282678EA72DECDDC7CF1EF364
-:10A1D000F3E3AD7BEFC8C27DEAFE136686FB24ADD8
-:10A1E0007FF3FFE175C0C3773B01FF43D825580ECD
-:10A1F000F11F58EA149634F87EBFA4E98FF9952828
-:10A200006F175BE5401FEC612D3038F67F9D54F5EC
-:10A21000AC07004B1BE17C1D59A230D94D6DFF915D
-:10A22000BF25A02DD8758CFB4DAD266716F24FEBE0
-:10A23000E8D0F3FA5AFB62123FE79C6F6643E625CB
-:10A240000F09BB37C6C39E413EAA6D95ED5EA0FBCC
-:10A250008556D96902FFE6ACD39D806765CE31CFC4
-:10A2600082A968E745DCA87D4F6519FA2760A71E1B
-:10A270007C61501EDF807CF450BBC47E066B5EFEAA
-:10A28000D2D0FB0A35629E87DB36EE4F013AAE78BC
-:10A2900025745C8DA813ABD1F92F8792447C98C6A6
-:10A2A000D2D02F01FE21BD605458B719F8F5C16412
-:10A2B0007707C61B9BC5770C407F921C7608BEDCD7
-:10A2C0002AEA04FC5B25DAD7CB7CD52B1BE0F942CC
-:10A2D000C52BA39D62D0E23EC164A7BB1CF10BEB72
-:10A2E0003E86FB35CB851E5CAEF9655EBE9F01E602
-:10A2F00096FCB229CCDB1889EB7E5572F854FC8EA3
-:10A30000C8A03A5C5A779D5877CD8623FB318C5B89
-:10A31000D5123AAE4EACBB4EB76E6D5FFBCF49BAAD
-:10A3200073C837B86FF16723F7133E10F368F7CDA2
-:10A3300023B83EAC05F0906E355ED9EBE57E9D0D01
-:10A34000BFC373BF80F77E41EF3AE633A5C0B8556F
-:10A350002FF075B26743EB3F1F6C7DC484F1959E6F
-:10A360002F966F31923F0A8833A1BFA8E78B156201
-:10A37000DD2B74EBAE754B3AB8B89F3C18AE960522
-:10A3800048D7555B8C0CEB11F5702D6B59528E7CB8
-:10A3900036985F395D5688F90270AEA6737C370A2D
-:10A3A000E7A811822FC7B17144978AD81BA28BDE10
-:10A3B0008FDDBE7F9C15E5FB72F7688ADF35BAEB4F
-:10A3C0009F2F177EF08C0D8CDA0B6D25D6F118A718
-:10A3D000F4181C924AF156E478C0475E87CC2AA153
-:10A3E000DFDF9EB6DE0378CF3D9C5F85F17CDE61CA
-:10A3F000039D77DBD99D4FFBC07907D263D3281F1C
-:10A40000EDA0EFCDC03C643FFB7B72D7E3B980FE8B
-:10A410009ED27C9C57827168E773851D68E8C9B538
-:10A42000069FEF2E18C1E3F5A7923EFB31FAE13308
-:10A43000B61BE97CC30CA3FF3DAC9FDAD9ADD0BEFF
-:10A4400075CDE1A56BC390AEAF49B46FBDBF774D7D
-:10A45000DC62E4AB76A31DF7A1FBDBFF6D2FDEF71B
-:10A460006C91E87B12751D65595BA19FBB31CF11C3
-:10A470007CDE2B375A25F8D8082BC5C3336E3292B1
-:10A480005D3C9F6CFD25FA372B9C1B498ECFEFD985
-:10A4900069A2FAB9AD1243D3BF3F69DF1B888FF3BE
-:10A4A0006F1E31A1935DD27AC4D4F777ECFD052FEE
-:10A4B00004FE1407379B304E59B551EBF799904E77
-:10A4C0002EE1FFD4BE728AFA2BDA24D2332B5E92AD
-:10A4D000E93CFBBE8EB74CC8C7B55B2496981A748E
-:10A4E0007F8314F21D84A58CF3C152A1675632EF0D
-:10A4F00053C9306E6533AF23604F87D6E5AEDC328B
-:10A5000087BEDBB4AC79687DF3B0E0EB87301EBC6E
-:10A5100015BF83143AEE61EDBB5C3A7E7E5CE3E7E7
-:10A520004C9689FCFC55911A950DD7BF3AB2E2E6DC
-:10A53000A1CEB1F7083BACD9C1CB3E03D911FDB8D0
-:10A540008B6D5708DEBA9ECB26B483E5ED9708EFF6
-:10A5500095ED5D54C7711773D7209EEE6AB7DA5137
-:10A560008E2BFBB85E9AD96EF67A25BCDFD284F4C6
-:10A57000ECEFE4758B9E3D12F92F9ABE7A48E0EF1E
-:10A580002181BF874041A7E4A21FCBE3DE8733369A
-:10A59000EE8F81FBB5E27ACD817D91E8EFCD6497B6
-:10A5A000EE457AC07B18BE87BD148AE73B1987E366
-:10A5B000CE2DBCDE596FAFFA4764CDA6FC23C49DF7
-:10A5C000084FCD96503CD7EAE2ED7523B87DDEA466
-:10A5D000C373A59F59B3110E5576786974AF82EF96
-:10A5E000EDCE9128BFDAADA6450DB5FFA8B5EF09B0
-:10A5F000BF59EBCF16E7AB5BECCDB6E038D894CCC7
-:10A60000EDFF8A29B207E934103FA4EFCB510D8149
-:10A61000F801E286DF8C88E771041674BC3B526651
-:10A62000717181F8E18749EB2B73A15FB785CBF995
-:10A63000C5C9301F7EDF4B61E45FD66D31D339C0B1
-:10A640003AA03BC509EDFC1C83AB5D2A437A83FF2E
-:10A65000FDEE888978AE8619E360DD73DA389FCF26
-:10A6600029BD447C72209DAFF7B2A2260EE58F6B08
-:10A670007E389EC35283CF3F805CE2F8DA765E0F6D
-:10A68000D4BAF7EB51A9A8D73AFE3A6A09B45746AB
-:10A69000F0F56B7E9E1FFCBCD1DCCF3986FEE783D4
-:10A6A0009ADCD8F93EDA83C2CE30A989F8BBD6D875
-:10A6B000F2760CFA4D5BF9BE3DDB6DC46F9CB18642
-:10A6C0000F5E6F8A81755F7C5DA27A347CFE09E043
-:10A6D000B38B4B5B4EA31FFDD5560BF98F0F828FAB
-:10A6E000383D77B03C6A72AB7D77AA81AD257F7229
-:10A6F0002D6BA27695E0E38B6D8D26CA9B79839EA8
-:10A700001F3DD8EF58A5E33B537228BF357C104E50
-:10A71000FE5FFF01D98EFB2780A7FF4E0EC687F094
-:10A720002F5AF786113DFB8FD8C85EFC49F0D979C6
-:10A7300091376E982CD3FA0D53789BD5F9D668A42F
-:10A740001FE21BEBDE3777BE358E9FA7F612DE5772
-:10A75000BE8A49F120385BAC94DBD3FA0D1F2CA2E2
-:10A76000EFF0D4ED19806B8C292E00D770FC2F49A7
-:10A770003C1E3448A1F160DD6ED9155CEF05EBB9E4
-:10A780000FF54F929003A6F813D02F1999AC92FDB4
-:10A790006A68E7F43474F016DEBF80E73B8CF4FEA1
-:10A7A00041F78B3D3578FFAB542BDF4FBEEAA9C490
-:10A7B000FE7747CB544FF9DD0F568C0DD69B0CE13D
-:10A7C000047AD619FD0914371E31107C75472E27DF
-:10A7D000A4DB501F6D2CB567A3DEE1FA6EFF68EBBA
-:10A7E00072E4630FBE373130CF6BC2DE325C6F1262
-:10A7F0007A152FF079C57AD7B2B9223EE67C942D2E
-:10A80000FC3D882B26264F1C1C57DCA83F09F6E090
-:10A81000E86209EB89140FC6B53B8F737DD0D0F188
-:10A82000D0A7C8E7759F98A9BEEABB9D0F8DA53A32
-:10A830005BB7FB56F42BBEEA7CF856CAF3496B09AA
-:10A840002E0FC29784FECB8709580FBAAAE3C30420
-:10A85000B2AFBB26AEF744A09F927B275E07BF81B5
-:10A86000F80FFC17E2BF9D3DF99ABF62C579571DED
-:10A87000505C889F5507F20F55A21F71B8381FD53D
-:10A88000B874389FFC953CF4576C01FF455B4F65ED
-:10A8900032AF77E9EF0AA33C81C44673FE61E92138
-:10A8A000FC53D3FA0ED9F59A3639A46E507BCE9D5F
-:10A8B000ACF07D7E8D7F5A2427F1C776DED6B4EDCD
-:10A8C000A4F5AD34B610BD1BB618F9FDADBCD5EA84
-:10A8D000AA3D2CC683F8388497800E334D5EFA6EFD
-:10A8E000C5C154EEBFEBE9F15932CF631C3CE1BE68
-:10A8F00019F9E560917BAC7D08FBE061C53C3E95B4
-:10A9000004BE5BF97925FDB853C93C8E8F8C0D3D93
-:10A910003F3A605F9239FFCC340DFD3DBD9F69F237
-:10A92000C4D83306E08BA39546FB3AE1B78F08FA0B
-:10A930005E42D55D46F20F8E32FB3B5867384BD3F3
-:10A94000AF93B95DD5F2DDAE0D2ADFD7197CAE919C
-:10A95000F4E47C6D3EFD7969E1D7CCD7F935EB3570
-:10A96000FD37868D41FDD722CEB9ADC90CF306E780
-:10A97000A3F4ED7EB18F81E775B06DC8FC98F23617
-:10A9800007BB4EBC41756627C2D8689E97A3FCF5ED
-:10A99000AA61F2D70D03F2382F84BF347A5C10DF3E
-:10A9A00055D1D3E30D81776D9F2D5CECB39D56DCC3
-:10A9B0006F24535DD67913FF8E9A9FE2AB864CEEDF
-:10A9C0001F5D2893685F1CE01C650ED2EB1746F0F4
-:10A9D000B8EABB0B24CA9B76E1788C9F5A24AAABB9
-:10A9E0005EE5EB35211F8D695DF224C9AB871D63E0
-:10A9F00041DFA9986DE17671806EDABA07EC568C6A
-:10AA000087EBE1386A713CDAC159C2EEE9CF218D9A
-:10AA100065BDE51857563B2507EEDBEBE93D77E1D1
-:10AA20008477E2FF013A9F4B761F21FDD67B7901A7
-:10AA3000E63F0F667E3E0AED65ED307CFB3BC1B71D
-:10AA4000DAF7591C63D546FC3EC98F12DD9F207E84
-:10AA5000FB0DDF468E63F87CDF7FAF91902E8CE894
-:10AA6000319C9C9C12F39D4A16DF258CE3FB24CB82
-:10AA7000B18FF26AF48EA4FC42F68DED4B35EC7E7C
-:10AA80003707F5D6C5AE0339A6203A9E5F03F28E8E
-:10AA9000F6A3635F826A0BE63303F1972469FCA691
-:10AAA00008BB18CA77E791EFB2B1FD30321DF5EE61
-:10AAB000F6A391B7E07CBB783BC09FED328D8378E5
-:10AAC00067CCFC8860F89E24F82EB4F07918EB1B54
-:10AAD00053353EF87EE3707C6B4CE1F584217CAB12
-:10AAE000ADB705BF8783FE7DA799BE8783F9E6E8EA
-:10AAF00020B9484DE1F230497CFF660AF3D0F700F7
-:10AB00002789EFE04C51984F89C17D2E9FCCF76586
-:10AB1000F9798602C1BF93145F17D6394C11FB3205
-:10AB200085AC97C64D677E6A9DCC4EE7148A9983A3
-:10AB3000DAC916DF9D9876C96E69A1FA3F5F821265
-:10AB40007DD622CE430C41B7C0FA15FAEE0DF1A521
-:10AB50008CE76186FE6E4A650A9773FA3807D2F76A
-:10AB600002A3FC147EDF0C5F325561155877749B8D
-:10AB7000C22CE100EFF6B70D24BF9D7DAA17EB4074
-:10AB80001DB1E2B92F18D5BB4E7272F944D382754C
-:10AB900012DA7AF5782884F9303F364981C892F084
-:10ABA000E8A3F7DDCEF8398D22A6D207566EC78FFF
-:10ABB00027935EF7539C54027112EA7583C543F8DC
-:10ABC00028C3E4CA44BEBF1109F314364BEC38EE77
-:10ABD00057A4F1F56AF3170223E0B9BD32B15E4C18
-:10ABE000811E8FE1FB1E9154385C6AE7DF094AA0A1
-:10ABF000EF04DD285EFB13F8772123EFF75FFC7E7F
-:10AC00007E60FFC781DF0D8A0C7C8FD281E74C30DC
-:10AC10007FE753CE07FBCD77A72CAD4E9918A897A9
-:10AC2000636EA6A25FA1AF9743F49D0B3ADFACD54C
-:10AC30007BBCEA9DABE2B9B98571163A4F9B6B19A3
-:10AC40009587762B23D15D9D42751F5B6EA14914BC
-:10AC5000EF44574480CFADCC3919F11CA8D7E3DFBE
-:10AC60004F1A38CF94C0E8FC9FD5CCEB199F01B99F
-:10AC7000C0EF178154A958D7C29E28A1FAC7A7A22E
-:10AC80002D0E3C87604678AD01781B2DA2EE47570C
-:10AC900077D96833D0F7381B59389DE79E15E6FE03
-:10ACA0001EAEFFB188623A2F9DB56D5A12F983B07E
-:10ACB000DE69DA7A0D83EB10B1FE0F9FD3D7FF69FF
-:10ACC000EBC2E3EBF85EBBC097B64EBB76DEC7A91E
-:10ACD000849CF7D1D6FF4C385FA71177E2D3E859AF
-:10ACE00015F5837E7D1A3FFC3FDDFB356D605C0012
-:10ACF00000000000000000001F8B080000000000A2
-:10AD0000000B7B2ACBC0F0A31E818565181826F1A5
-:10AD1000A18AD112CFE066607804C42C3C0C0C856B
-:10AD2000407B23807424101F01E2A340ACC2CBC03F
-:10AD3000100BC471403C07C89F0BC4A5409C05750F
-:10AD4000632B0B03433B107702713710EB3033302A
-:10AD5000E832136F7FBE0803C31309045F51126802
-:10AD6000A734FDFC3FD8F00A7DFADA276DC0C0B0E9
-:10AD7000D502C15703B2B759A0AAD96E81DF8C1D85
-:10AD800068F23BD1F8BBF0E83FAB87CAB7D540E5E6
-:10AD90004B693130782285899D067EB7A0E30AA0F1
-:10ADA000DE4A200600FB72DB43680300000000005F
-:10ADB00000000000000000001F8B080000000000E1
-:10ADC000000BE57D0B7854D5B5F03E731EF3C8CC6F
-:10ADD000641242483084092FA30D3821210D14DB61
-:10ADE0008140448A1AD42A54D4098F24E435011F9F
-:10ADF000176BDB0C04232060B058A2463B4150F097
-:10AE0000061D6890200107B034F4A206AFF5D1F614
-:10AE10007A8352400824E20BBDB6FE7BADBD4FE6FF
-:10AE20009C9319A07FFBFFB7FFFDE3D71EF639FB0C
-:10AE3000B1F67AEDB5D65E7B8F6C3213692821DFCF
-:10AE4000C2DF0F089926114206469EF6D7889BC49A
-:10AE500013529F4DCB4984A48D2041221032B986D4
-:10AE6000967309597B27099A3308D97FC484DF5721
-:10AE7000FA5899B60B99AEA1DF47B2F74F64D27674
-:10AE8000F4FD1317446C179841829B693981D0DE19
-:10AE900086133A840F9F933D0DD6D1B47ED39D2661
-:10AEA000627613F2381D868C27C441BC56429BAE95
-:10AEB0001CC1FA7B6C86E93951808FE19479B4BC6E
-:10AEC0006A4A49DE2A5A5A2D33B81A67973C17A0A6
-:10AED000FDBB4CC3711EB4DE13765AEFD1F74AC9DD
-:10AEE0002ADA6EC31C93509245EB352BB3825991ED
-:10AEF000F9ABCF3944E2ED0266533E3CBDFC195636
-:10AF0000E0F98B89261C674D0DC307ADA798520841
-:10AF100069ED3C60F1D1FED654B61E2DA4DF1F1999
-:10AF200061F2500C92473A0F58AFA4E307724D9E5E
-:10AF300091B4769A14165CF6C878E309057C1CADCA
-:10AF4000E7D96171DBFBD7A7FD4E8279AFA67817F1
-:10AF50003322EDC6029CB4DD1A4AB2101DF797B237
-:10AF6000E7308CFBCB1B12850089D4BB1E80847A12
-:10AF7000734C244CEB11A9D742E838AB26BE6519B7
-:10AF800049EBAF2A32C124C81A8FFADD6325D0DF1E
-:10AF9000D4518747005DAFA7DF611E598FCD8279FD
-:10AFA0003F3A452180FF5F0AB41E457163B1F24309
-:10AFB00080CF51435CF09E3EBDD1F0DA2658100E92
-:10AFC000B27A0321790440C0BF55DEE08A61C05FD8
-:10AFD000B9C403E5340F6D6FEFDFBE4B30235D1A4C
-:10AFE000E5402AE02F16FD46707CAECA5C6C057AFF
-:10AFF00010D29052349A90F580271854F2B9673ADB
-:10B0000022F557080C3FEB64E215E8FCE27295E08C
-:10B01000528A6753966B36CCD7EE53C875B4BC5280
-:10B0200008A48A4097D10AD9EC46BEB08EA4E53573
-:10B0300057257A80FFEA85508A04DF6FA0DF699781
-:10B04000078AC6CE06FE6CF228C8CF947F0E03BED8
-:10B05000D7F812C92A377EEFC4F6F6112E33628272
-:10B06000C243F13280F212E035FBA6FAEB87037D92
-:10B07000C6995C40A155C224F73C909F048B0BC637
-:10B0800097C7DD8CF49307260A4443EF9F03BD293D
-:10B090009ED6BA8B7E0ECFA7723F4C1849EBAFCE2F
-:10B0A0007EB911E8F4F4FD16A4DFD3E33A17815C0E
-:10B0B0003D7121E73D1FCAA5E2D94CFB7926FB442F
-:10B0C00006A1033E36EDC304C0DF90110DF7102733
-:10B0D0007DCEE8AD2563287CA4A1687E06F2897048
-:10B0E0000BC5EB90250A715B182DBF25F09D7843A9
-:10B0F00059AC6CA7F319C2E9DCDAF996A518FA9BEA
-:10B1000043C2A39CF8DE929C18D13343724938990C
-:10B11000F6FFC4824328E74F5F9DEC61729E82FC7C
-:10B1200092CEFB4983FA54BFA45848208E3E8774C0
-:10B13000F4DE0C700DC93C3107E0DCFFFA2101E8B8
-:10B14000F6CC986437E8A3045F27E9A2741F92F550
-:10B15000CE8350CF610FA6146561FDBF603B03FC39
-:10B160002D6EEF26C0DB36A1E630D027906DF23091
-:10B170007A333DB8FADEE420E89121B63FCD14875A
-:10B18000211F10924CE1731194937A216C190EEDEA
-:10B190001E60ED8692A000781E921958243AA1BE36
-:10B1A0004F2872F41FB7153422C807E574E0D7EDB5
-:10B1B0000A292F8A2207AF7279AE17C82CE46722BA
-:10B1C000FD15F8666802E31BB5FC0CC043C7DDFE45
-:10B1D0005AE20FB3283CBF5A322C5BA4F0AC857600
-:10B1E00051E4660D97035B07090814AFFB7FF73B3B
-:10B1F0002BE06DBB899441FD4999214B17A72BD0BA
-:10B20000630161FD37656DB4A0BE103291EF16E4A5
-:10B210002B5EEB1890BF65828FB64F7131BDECF09D
-:10B220002841D0CB8E948060A2F0B8B3886B6306BF
-:10B23000EB2E40F13717FE018C2EB1FAABD7240468
-:10B2400057D1EF73B3A8A001DE28AE4C74DCF984AB
-:10B25000CD73AEA77E11D08F902213E073958BD162
-:10B26000A709C6A153694A63FDACB98F0497011FB2
-:10B27000B958FB11D084D26D44EECBFF22D07ED3DF
-:10B28000783B907B68179712B498683B778D89203C
-:10B290007C52F8B000741F9DEC06789A523CFF3E39
-:10B2A00003E09F257936D2CF23000EDA4F538DC9A4
-:10B2B0008BFA225769063DBDCACBF4BC8AAF0C3E5F
-:10B2C0006E9A272CD0B9930CAA27114FDEB0D50562
-:10B2D000E52C064F462E9B571FFCA395E032DA382B
-:10B2E000CD1226504FC54309EFAF84CFC39E125CE9
-:10B2F0002101DCB90C6EBA2E233C69594A33C8418E
-:10B300005A0AEBCF4DF1A3E21DE0B2A970E5D2FAE3
-:10B31000A0873D4A33B0828DC35792C5E0D97FE400
-:10B32000AD0E81F5877265E3F0DAF8FC09C09BCCBD
-:10B33000F53AEDAF450E0B22AD1F1C47DC1BD9685B
-:10B340006E292FF2FDB11A8A075AB0F371C87A3309
-:10B35000CA037D15F896F2C1BC065ACE8CC8C7C880
-:10B3600015669DBCD8F9BC49039323CA366168971A
-:10B370004158D904653A8F924CBD9C118FA64CE17F
-:10B380007000BF53FDB374BCC2F8E72A66C710A2B1
-:10B39000A9077C3ECEFDEC6AFCAEE0BA9EFE5345AA
-:10B3A00007DF909AE4C922E8938E276F36015FDDAC
-:10B3B0004B4C623CF2B3D0A7BFE8783B1687AD3068
-:10B3C000495B475122E02DBD2671B20278ECF06155
-:10B3D000D9D651E3C5272C4D6309194C34E3648059
-:10B3E0007E7555B450BC921A2504FA7A9C164EFA12
-:10B3F0003DFDB5869940AF87171D4A05F94D36B416
-:10B400001F631A86723AE4355A0BC73FF133A8BF5F
-:10B4100092EB131B403C169FAFC173889DEA59AA5B
-:10B42000A7D3298295B1117DB1EAAA77B27D76CEF4
-:10B430003F89F80CC3D3A85734F5AFE2F503C245F2
-:10B44000EB9DC07A2A3CC6EFE70413EA2907D89996
-:10B4500014BF8F12D76C5C973D265C17E3F8FB9006
-:10B46000E7C064A4678878840CD0B77F356BF9E0B7
-:10B4700027F012F4AD14423951D26D681F52398E43
-:10B480008375AF49AA2983F7A1341B01BD7060EA17
-:10B490002101F099D6E61B0A72A8DAB9933DA114EE
-:10B4A00078FFC861DF95289F31EC46D54E34CEE752
-:10B4B0008A6B97A13E18EAEBED80F5DE5E2979AE46
-:10B4C00003FEF251B8ECA827DDE4BB147E4F6029DF
-:10B4D000E859B78F9607D167257F96B1EF2B6BCBD5
-:10B4E000728E4B917E578EA0F628D58BEB3BD75BA7
-:10B4F0006E003BA3C6E406BE5DE379CBE2B54379BB
-:10B50000F200C0736B916AF78505182FED6D2FDA85
-:10B5100079E35C8A0B94D6687338D5A5592F9AA61F
-:10B52000BE3316E020B75222A6C6A6239D2FF2599D
-:10B53000ACF504603169D691FD993B707D799D5CD5
-:10B54000857451D715751DC11EA97E99C7E5E811EF
-:10B5500077C822A0BEA2B24BE9338FEB113BD79B39
-:10B56000540F333DC7D793358B92713D51F527D892
-:10B57000D6A024E6717DBB26FBB9841B284C76D06F
-:10B58000B3A09752C864587F47829E01FD240504EA
-:10B5900018AF699C8BACC2754CAF4F47D6303DF8A5
-:10B5A000480A417EA2EB5033AC774D69A114E8A75D
-:10B5B000A9E680E0D3AC9FEA7AE7A8E924A007E7F0
-:10B5C000E6B2756E6E161BEF0F80A0710C5ED0ABED
-:10B5D000C675EF171377A0B28CE3F69611FF828938
-:10B5E000D9818FCE780BF1B866FE63F8240D1BB0BD
-:10B5F000BF140BA3C1CACC03F87EB5CF340DECEE5B
-:10B60000F552E78A1114FEF5D3E62A01FA7DB587D3
-:10B61000F95DAB26CE7D0ED635B3496170D594A1C8
-:10B62000BD1AC7E1DA007DA39FA8A05F74DF9D1B50
-:10B63000570CA3FDA4503F467043A5A0C54CBFDBEB
-:10B6400081A6A0BF7D6106BF874C2651E0FF0FC1D8
-:10B65000C6FC505F67C748A4A7C905F0C6797A2D14
-:10B66000E027BAA91FE67603BC6EEB6884D7E45ADC
-:10B67000EA8EB4FF3DF717EE82851FECFBD9EF4C45
-:10B6800003F95A7727F3CB8CF0DF3729D861C271E1
-:10B6900008BA758E18789D031A0CF48F27887039B4
-:10B6A00032195CC70546AF473B275F8F7E52117D3D
-:10B6B0004F3B7AAC739815E4DB68EF3D1DF74136DC
-:10B6C000DA3B8675E652E521067D3FDA1C9A8EFC50
-:10B6D000B6CD847A8A10A6E70462727F3B1C1611ED
-:10B6E0000617B21ED5DFCBE5F0ECF9B4FEF29D767D
-:10B6F00002F852F9218DF7B9AA86F24194797708B8
-:10B70000622CBA333B83D3BD13C61B7869FA5369E5
-:10B71000B682DD160AD60F2E07FFA386F9BBA1F06D
-:10B7200001D43F69536E433F654B73F2ECF9C05748
-:10B73000995E0FA0438507EC93687EE27493E5A2BF
-:10B74000FE7B2C3DDC58B91CFDDEC6CEE8F39F68BD
-:10B7500062FE7688EA494F56ECF1F34CCC8E4E30BF
-:10B7600071BE9B7A2845BB9EA9EBAABACE0E914822
-:10B7700040D4AC87B772FC19D74D22355846313EBC
-:10B7800047FFB1713E8B436C9868C2F88ACAE7B430
-:10B790005E0AE095CE03ED39CA8741B0E71E250D5C
-:10B7A000283701DA7E33E90FF79DC47459F39BC043
-:10B7B000E7D7371EF7AFEFE2FA6A5DF6FD56E88A83
-:10B7C0008E9702FCE177323D59E560766CC14E39C7
-:10B7D000FC030A4755B3807696699F15E13CB7890B
-:10B7E0009669D7618782F5CFBA2C58F69B3BD77EF6
-:10B7F0008F967B778A04EDC84C9B09F8F504E757D0
-:10B80000924BCB600F5B59B1AA79FF5DD05F599B1A
-:10B81000995869FF55BB4B6FFC1E2D9776C804AA3B
-:10B82000546D5EAA0CA6E585412104E59EC974A16C
-:10B8300002BC242A41F0DB7B9C9DC93FA2F33E5D04
-:10B840006B216E0A4A9DA333F9568A8FF2E0F642C5
-:10B850006857DE228046A4F3D87C2815E6B555F05B
-:10B86000807F5FB1254E670F9EA053F901FDBE9802
-:10B87000CE13E4B2943414C23A57B5799DE2D6C4DB
-:10B880001F4ED7BA701CB55CB5958E43DB55BF28EB
-:10B8900078608AD526E2033D746EB775D6B3769884
-:10B8A000DF52659403E6F5B002F54A83C52F5BDDF0
-:10B8B000005FB35248BF9737352B10DFF29BC9DDCD
-:10B8C000E0E7566C19A087AB5144795D9C60D908BC
-:10B8D000FA9CD8BD29378FEE4FE7D3B554C78E8A6F
-:10B8E00094CB411F221F0695999AFA43C504E4D7C9
-:10B8F0008A2DA2DECEE6EB7FE028A37F60AF03E3D4
-:10B900007E2AFD16737F59A5DFE2044E4FA9372F1B
-:10B910001A3C6B811E149E06C0177DAEE6F03927D7
-:10B9200092491077717A894B88C2D7C667834C8A4F
-:10B930008175FF75D9CC49522ABA0F8B20F2E45A8F
-:10B940003E7BD2145AFEBDA968B309F587C70D72B4
-:10B95000A4FAD9CF98985CD6A72A88BF86A979CFB0
-:10B96000B2F804C175AF616AC9736017D0F6DB4CD9
-:10B970002887B4FDE8D8ED5D85F9BAF6AEC232B5D8
-:10B98000FD4E6C6FB978FB86C209FAF10BCBD5F688
-:10B990007B117EFBC5E1775D37513FFE7595D8DEA3
-:10B9A0006F66F4EA4DB0A05DB3DCEAF14ACC8E0AD2
-:10B9B000C37B2971D446A827AAFC403ABD607FDB2F
-:10B9C0005B12C6AE225ABE98FC3AC0E1A0D2A2E5F4
-:10B9D0008BF87C9B8E1F13BC89BA32EDC975E23B94
-:10B9E000BC0C83382D088F3258417D3169B005E198
-:10B9F000BD7F9F15CBF74F60F0DE3FD88E72866B10
-:10BA00000BA5E3FD8AEF1AADDD0A2B138492DE103D
-:10BA10007D1F027E23EFDD26786F13490DEA673321
-:10BA2000417DF47046DEB3010D7E560CA1F4A5E510
-:10BA3000B360FF0C8CE0F5E1212529C59A71EA87F6
-:10BA400028B33666B1F7F3EC305E510FE0C1AFF4C6
-:10BA50008E02BBD2388E7958BE6E1C4B7A198EF38B
-:10BA6000B5611C737A99611CCBAC8DFC3D1FE71B43
-:10BA70009857AC711E1E36413F9FF4721CC72C1A9A
-:10BA8000E6935E6E18C7C6E643DFF371ACE2C5E627
-:10BA9000337CA27E3E432B719C2451D1C5ADCC4357
-:10BAA0002B0DE3D8711C780FE39034E6DF28E6DE37
-:10BAB00012A4FFAB5602F6B462F63D0FFD923F5A58
-:10BAC00009EA13371D7710E89544DC2FF80F53224D
-:10BAD000CEE70B1BA5BF5D4BE7806A17A0BDB38007
-:10BAE000834882F5E89F57731E9DDF32337D293CE2
-:10BAF000DB0A528AC1CF5EEFF040FCF45C5B81321E
-:10BB00002F8A5DB0A0413ED1A5E35FAEF72693CC6E
-:10BB10001AF0B3B81DA0964F50FD45A8DEFA90EA82
-:10BB20002F789E94A99EA6EF8F53FD46142DBC4BF3
-:10BB3000B1DD0989E1F144135B47BE587754C6383B
-:10BB40005F80BC9D49E7711B9FC6828638E62B70DB
-:10BB500038FC9C1EBDBBCDC18D480FEF1560F79022
-:10BB6000C6011457BCDE30C0171597442C5E01F691
-:10BB7000D18F576CFF0D547B47281EB298CE775655
-:10BB8000EB3AF90A5A3E2777DDE5B16BFA99257F42
-:10BB900008F3B6D0FFA09FD93E5AD68C7F4799BEF6
-:10BBA0007C279122654AB7A9E2304E0F3EAE3B2872
-:10BBB00003BD6E4B66F0DC09CFB1F0D985F4BACB8A
-:10BBC000C5DAAAF0F81F944918D7A3AE81CCB81DE6
-:10BBD00088F57CEABA6280EF2ED9E22DA2F4BCEBA4
-:10BBE0000111F16884B76B5F9CD744FDAAAEC64FC4
-:10BBF00065F02F2F05FFDD4BF4DF49808DA7E2555F
-:10BC0000E583DB674D1A705C536FB6EFFA01C735F9
-:10BC1000FC7247D94C5DF9CE9AD9BAFA772F29D65A
-:10BC20007D2F0E2CD47D9FB76291AEBCA0E1015D4B
-:10BC3000FDD2C6A5BAEF0B832B75DF2BB6ACD3951F
-:10BC4000AB424FE8EAFBDB9A75DF4DFBAEBA09E485
-:10BC5000B1EEF72201FBEC73FB89B5605F7D6E9757
-:10BC6000D0AFAA065EA37278AA3605F9FB74AD1BA5
-:10BC70009FE7DA72707FCC6FA3F24CD7FA0D75870D
-:10BC800097AE98087A84D6A73AFCA9BA379706A83F
-:10BC9000EFBE1182D494EFC546858407801F93D8E8
-:10BCA000C7D7BDA2E67BD725BE37D2052BA7FF7726
-:10BCB000B12BFAFB1EA17714D87781F7CDB87F138B
-:10BCC000CB7EA07F579028FE83FAEC86F88646EF5D
-:10BCD000BC2A32BBFA1A71F2AB227D562A4CDE2BFB
-:10BCE00077A44E867841A5121E5513C5CEEE1B2FA4
-:10BCF00044811904FD30795918BC2222BF48BFE1A4
-:10BD00003AB9BFC1E4DB07FAB97BBFC8F607C2077F
-:10BD1000D3619FE61AD1FB2ABC276D03717D7CA7F6
-:10BD2000D63BE0F80842DEAB9D86CF3FD4160D80AF
-:10BD3000F8D19F6A6761F9835A1F3EBB6ACBF0F95D
-:10BD4000616D0D7E3F5EBB04CB276A03F83C55BB9B
-:10BD5000029FA76B1BF07B776D2396CFD506F1A9C9
-:10BD6000CA816A8F92246EFF717B9DAE1C583ECFB4
-:10BD7000E720D27F77A25C7B5240AECFDBBF1805B5
-:10BD800076EEF9F7CC18448F852723BFC5A69F17F9
-:10BD9000D7FB9220A57F4EFFEF561BA38FD544A65D
-:10BDA000817FB672A44220AE6E7BF53B682FD3F73D
-:10BDB00012417D19F468F711FBFA87390FBA349DE7
-:10BDC000D4FA279EFCAFBCB959401F465FDB41B196
-:10BDD00086D1ED590FD04D833F6697EDE4FADC80B4
-:10BDE0004789CB9D119F6707AAF8EC4C87784B9544
-:10BDF000586492E8BBF3AD669CD7F9F638B68FED80
-:10BE00004ABAAC785EC516AB4BAB1FAA42092EBD31
-:10BE1000BE487569F5C5F98E679D20F78B534CAE0A
-:10BE2000E339C01F5ECE1F8CEFD4FEAB42192EBB90
-:10BE3000AE1F7DF97C83308DED2BBAE36F8DE21F51
-:10BE4000A8CFC5298AEB38D50BA7B70C8F8771A966
-:10BE50001FE78271BA6B5D2E366E8A4BCB97954B7E
-:10BE60006C585F852F56BFFF68F860C7EF230B8BB8
-:10BE700035419C2656FD98F4903E53C03F20EDF28C
-:10BE800017B0EED832D57547C2B2DAAF3F2406CC30
-:10BE9000D7C0FB16DD78B49D5BF5A1A15D6CBA4BF4
-:10BEA000E4844A4FAA27AFE3F921949991CE3EDA70
-:10BEB000633CEDAF47B2AF80386F86E4467DE787DD
-:10BEC00081283F5559BA149F1BD1DD8971CF7C550C
-:10BED000EEDDB7FF91B2DCC7FF26633C837C437B7A
-:10BEE000A7DF65FE753E2972829331B7B56206E819
-:10BEF000C98F4DAA3DD09007F33E4B4CB89F7F961B
-:10BF0000BCE5CCD1D86565128F4FAE60EB7380FE77
-:10BF100007F3A3769A6EBD2E6DD4974BC8CDC9207A
-:10BF20000F25EB65D8B1250B61BDD7EC9BCC925C9E
-:10BF300038EF5252530F76CA2A99EDA3CE7511E904
-:10BF40000A0A57D5AEA7F3C09EF54B4CDFABFEF304
-:10BF5000C2440677795250F1D2EF1FB5E6DCF63DC8
-:10BF600002ED83F5A0D7020EE289168F99B7420F32
-:10BF7000DFA5E037C24BC8321D1C6ABF2A1CE2167F
-:10BF8000216A9EC6CF2481C775987CAC91F4F6EBEC
-:10BF9000631C0F6A7983A1DC64A8AFF289CCF92411
-:10BFA00043F23D06FAA7CAD25B88761AA1FC911526
-:10BFB000A9A744EA6DB8583D33D413B15E93342E2B
-:10BFC000763D6BA4BFE668FD55EDDAF67280F2535C
-:10BFD000F94B8F3B21E8FBB1D4900CF1AFCACD0FE8
-:10BFE00039014FA7A48013E8FD71508C1A177CB754
-:10BFF0000F5F5EBB007E04B236C5FB0B8FDC08FA18
-:10C00000FA8BCD32E6C5F8B798C366CAC7D5AD0B73
-:10C010006740FC9E968FB1F2C39FC0BEA1BF4D4F3B
-:10C02000CFF2E71F4F863811C524B3B74918ED8EFC
-:10C03000EA4D7F2E043DEE27BDC887C67630FE85CB
-:10C040004494FB6225BEFF77355FC1CFE5CCDFFAB4
-:10C05000C8279097E037F04F59DF7AD2A5401CA14E
-:10C06000437224A15FFE5DF25DD0032A3E4890D961
-:10C0700013755B378C3946E1E9DEF46F4E41E777A3
-:10C08000333E3C1F9AF7AB57DCB1F5CC39EE0F4588
-:10C09000DA05B19DBB8DD93FA49D3D2BE5B013ECD6
-:10C0A000CDCA66D9433994546E7BF6B927C14F7B0C
-:10C0B000DF8C7E5AC5B6DFBC3381962BB6CB4933B5
-:10C0C000D874EC4272842E7EFABF2563237428FF55
-:10C0D000F56F14F768F6FEA789117A546CDFAF90FC
-:10C0E000D1FDF15710DAAF74D9A3D02574AC10ECA0
-:10C0F00095BAAD5F2AE0777DBC4F208332FAB72F27
-:10C100006BFE0DAE878027A423A7531FDDFAD12B2A
-:10C110007CE32BB958CF057A3216BD5EE07AB96A56
-:10C1200097832440FCF30FE6E00CA0E38BF7386123
-:10C130001E27A51AC6D74F3F940CFB7F657220D9E6
-:10C14000854FF6BEEC99FB90DF4A859A64B68FE97D
-:10C150004DE5F1F25498DF82A61FE1FC4A880FF901
-:10C16000AEEC69B108E2C39F4B64DAF628727183C2
-:10C17000CCF69F4E6E3443921F3909763ED8D76F66
-:10C18000891867256411EE83DDA7C671C9622C7F0B
-:10C19000CEF7A546C826D53FB4E8F875D3C39D4071
-:10C1A0009FD343BC83004E8A8700C79700FBFDE204
-:10C1B000D1A983187D58BE01B6A3FABF00DE43FDA6
-:10C1C0004E19F70935EDB8BE64E3DFCBC7A770DBC6
-:10C1D000603D3B99CCF62B8DF35BC2E747FF3A8974
-:10C1E00086BF34F2CDE47DD34A26DFAABC07674E72
-:10C1F00083EF9FBDCDE407DAC1FA41E10A0FC2EF38
-:10C20000FB6F15501F9849389A5C6F92B95CEBBF71
-:10C21000FBA99C425C80C22D413E43844F68FF894C
-:10C22000887FF44B4AD6D3761AFBCC0FE3613D25C9
-:10C23000F25EB37E94723D304DD6CB3F691A785989
-:10C24000F662A54C02605A56BE6F46BFBB729B5C3D
-:10C2500004F33ED372F09D1F53BE3E1352E554AF1C
-:10C260003F8D725AB663B300FC6994D3336574B5DD
-:10C270008E26A7F47D54392DEBFABFA23F55BCF9A9
-:10C280000D78A37A7068822936FE8C7AD021BBA300
-:10C29000EA41FAF736C9EBCF772ABFA97C462DB41D
-:10C2A000A1A0BFFBF851E5B73E7E54F9CD384F3D14
-:10C2B000DE8CDF2780A146E12ADA2DA35F52D9CE9A
-:10C2C000F66F68BB4357E4227EBCB87C9186435727
-:10C2D0002469CB41433964A8EF35948B0CF57D86F6
-:10C2E000728DAE7E65DB418525198575F5CC4B9E3B
-:10C2F000241F45B1EFD575C6DFFA8912007E48EBE1
-:10C300005540CFC9CBA86906F1B3BD22FA5B3DEE1B
-:10C310005E67227DFF9095F9B13D2E5E4E60E5DEB1
-:10C32000814A3DE839F57DAF95C5397B8A7A9D090B
-:10C330001AFFFE58BBE884FDE0AE20CB47ED0F4F5F
-:10C340001DCA4D1789F59DC505A78AF6F425E0BFDE
-:10C3500035881E700DE72FBDDD09FB6E3DEDC36F07
-:10C360009A45DF2F382C82F94C7A6CCE31001709B0
-:10C3700078A5D43C9E3F41FF4E91C02F2742DE441A
-:10C380003BB3AFE7AF36D8C3F67B15CC2F5BAF8995
-:10C390006B69F8BF9CF753D6A4FF5E4E5623FF95FA
-:10C3A0001BE4C1C7FD81A3AA3C64936CB6BF4D9842
-:10C3B0001FCBF5EE5431EBA65914EF3D1D22E6CD0F
-:10C3C0009E6F17493DCCB345C07D4E1218887255FB
-:10C3D0004D7A51DFA978E906B95162EBA3EE9DFFD2
-:10C3E00091F720F0C7CB7F1CF3147D76BFFCFEA82D
-:10C3F0003D50DEF56EFA1F49FFFA05FBBEC27DC453
-:10C400009E7D668C73F5ECFB6DFA83507EC58C7156
-:10C41000AE9E6566DC4709EC730447C2F721CC1F6A
-:10C42000A8DBFBE5189627B91CE9F48DCCFC91F349
-:10C43000EDFFF501E48F9C6FA7B302BB605F1CCAE0
-:10C440008DFF152BFADF3D7BBFCCF3D9FF71F3A92C
-:10C4500056880FF9CF4166ED007E4D60F160FF9E7A
-:10C46000F1CF427E7355EB7E05E2EC05AFFE650C25
-:10C47000E8C99E1DCCDE3927773D03FB6166E59355
-:10C480006532C5F339109EC1843CAB8C2D086445E0
-:10C49000C30BC3430FC503CC8BE2A50CF47B2C7CF0
-:10C4A000A42BFFACF8F8E42EA6C7BE8B79F611BC1E
-:10C4B000085EF6DE11B408387FF67EDF976340CF62
-:10C4C0009C092D457BE452F3BE5661FB2CFF73E6BD
-:10C4D0002D842F67DE73FE69E9CDF8FF43585F07AF
-:10C4E000F69783FE7CBEEB7E2CBFE8F020BC97293C
-:10C4F000FF3FFD9F46F71D94EECE4BD3FDA97FDA9B
-:10C50000795F8AEE8739DD1D2ED85FEED9FB178C57
-:10C510009BAAF3BFD4BC5FF97F74DEAABD3EDD5495
-:10C52000736426AD7F8484D71751385F4B9BFAF62E
-:10C530004CFAF5B731EC91D30A8B7FFC96B03CC135
-:10C54000408AC0F23CB85F5440D8BA5E90598A76AF
-:10C550004641E623681F10A9E64836C5C7F4F4052E
-:10C560001E960F3616CFA15C977AAD07E38106FFC2
-:10C57000F0A040BC900F5D70F5F51DE0AF4C499305
-:10C58000C3E631F83C06CF43CE69ECBD5DEF17CD75
-:10C5900000BF46E3E75DEFD67F2FE4FD4D238B8F91
-:10C5A000CCA4E34F4B135D416837A94182F9CCA07D
-:10C5B000C2DDA0D90F2A34F47708FC5A4DBCEC6FC9
-:10C5C000C55F9A99F991BFA5E36703FED2648C0712
-:10C5D0005E127F84E57F5D979A8DE75188E441FC88
-:10C5E0004D1F5CC5F1C9FC6689B797ECF59D20B776
-:10C5F00012A17E2FB3CBD05F56FDDE587826DC8F9C
-:10C6000096F8902ADEA53419F35535FD213E547A6B
-:10C61000FCAD7450E9F7F7D2E39C811E699FB92401
-:10C6200090CF026EFF4FF9AC53C4729A47C2FD28F7
-:10C630006EFF4FB2274860FF5F2B1D15412E4B2D1B
-:10C640006DD3214E6FF108C8D757769BD0BFB1E4A8
-:10C650000A88F7CC4609CB474DAE716068DFF8BD5C
-:10C660005D671E20101FF62A68789322169FFFE64A
-:10C67000DB6F27AAE735F03B213750FCCE6F2261F4
-:10C680001B9DE7028904E21321BE2B900F75F15D1B
-:10C690007D19FEBE9F1CE9E752F563E9917FF473B3
-:10C6A00017D55B1F52E6D80D4FDC57A12CA1F18F97
-:10C6B000BFDBCEF0E53F4282C3502F78C522CDBE0E
-:10C6C000D92366A63F76FD69470EC4C526F564C525
-:10C6D000337D3A02FD023FF70BCE13773CE41F9CFB
-:10C6E0006F1F1E8FFB821DA2C317252EB395FBCF94
-:10C6F000FF0AF914F4D9B38934C0398C1ED28BF1F6
-:10C70000D8C0264BD4FDDDFBCD6ABC89D38DFE8914
-:10C71000EA792337E68B04E2B574EB9EF1B134A6D7
-:10C720003F1DE0EF43CD7EC9DF8B5FF0D701BF5BDC
-:10C73000AD5D85D1CE83ADE0F8BBF1C05718C7BC65
-:10C74000BABDD904FC7BF526936EBF3160E67ED777
-:10C75000583216E0BAF180D5910B74E9103D903F44
-:10C76000E86FFF44F145D9B732E213FA87B8F83ED3
-:10C77000338BF3EF9143F300AF7BCE5A303F67B773
-:10C78000D250110DCE2BAD4CCF2D20A17BC664FC19
-:10C79000F3E177528F3D3C19FCCC4D84C7318CFCC2
-:10C7A00047908FCF6F21783E14FC52D00BE75BD8B7
-:10C7B00039608A9235E04F5379FF81362E7365DBFD
-:10C7C000F67F053BA0BA5D7041EA6CB5D4A540BCCC
-:10C7D000D5DF9620C2BA9BED56F32A5DA36FD5C86C
-:10C7E000C53E33CB373E3861CF1D30EEA7DD0A01A1
-:10C7F0007BC4FB5AAF13D6ED4FDB73E2A3E5CDABA1
-:10C80000CF5FD792E95324E88720DE8DFC90D56274
-:10C81000D395BF27FA06837CDD68EEBAD713857EF1
-:10C820003E0BE3B3CBD66FC1FFCFF4DBDBAA7EF3C5
-:10C8300089451A39CAB4F4D36F83A2E9B7C5827B9C
-:10C8400010E07DF1DEE18380AE8B0FCB03A3E9B76F
-:10C850006DB56C3FEF259E0FDBD34AF5DB351AFD36
-:10C86000D66AC1BC3863BB448B89AF8B97D06FC18C
-:10C87000FF1EF9DB06FA2DCA7C475A98DE50F5DB1D
-:10C8800098F663A8DFC6B49A7479A369964BE93722
-:10C8900061E0AD600F77C89EB828FCB38DDBDF2F59
-:10C8A000F13C3C1807F4DC1D16B6BF79B97A2ECBE3
-:10C8B000CAE87D493DF7DF846755CF2DDEA99E7319
-:10C8C00034F221D3738B77533D27003F323DB77845
-:10C8D0002FBBC7C1A8DF32FBE93782F5ABC3ACBDC4
-:10C8E000BF2D63C31CDADF58AFECB1D0FA6323FA73
-:10C8F0006E9C56DFDD6161F72EF4D3771D97A7EFAD
-:10C9000076727D47F5D830D0AF46FEF0B4EBF38EAB
-:10C91000F78C3FD9F26B9097D745DC373CCACFA54F
-:10C92000BD31FE642EF0578B85E9DF3ACE7FE76A92
-:10C9300003D87FC16B6C7E5576968F5CDDCAECC3E5
-:10C94000EA1621E8A6FF2C9CF09502F02FDC2B9034
-:10C9500041B43CD3CCEA93E7D57D2F32235BC30FA0
-:10C96000F3F32B306E3F5F221688CB57D80B3F86F0
-:10C97000787C453E8BE357F0F70B0F77D5433C7B34
-:10C98000E11302EE7B129E0FA0E63796B62FC57814
-:10C99000AD312F40D5E70B83FAF715867CC6663E8E
-:10C9A000CF996217E285BC2946CD4B6836E2A38356
-:10C9B000E3639388EB661F3E287EDC19FDF1412975
-:10C9C0003A233B3932FF85AFD379E546E6A5E2C38A
-:10C9D000383F35EE5CC1DBC59AAF8ABF7EF355F1B7
-:10C9E0006998F7B3A037402164931CC88BA17C8061
-:10C9F0007A23F03B11CFEF174D1A3948AB87B77246
-:10CA00007D9ED330A9209500BE480DF04D49E3A28C
-:10CA100043A974DEE3DE738F85E5F17B13CC3ED84A
-:10CA20001FDD6AED45BDA6F2D5D79CAFDEE178DC0F
-:10CA300033B806CFA9FADB0417D815FEB015F1E715
-:10CA4000A7F883F32B7E7E7ED14FF90BE4E9E01348
-:10CA50005F307CED15DC101F2F54D71FC03FAD9FFA
-:10CA6000D3CEF0EF0F0A88FF5CD28BFB23D58D82EB
-:10CA7000274CEB57B72DC2BC0755DFD23FBB961EE4
-:10CA80001A7E94A2F12356D2AC7F15BCDE8DE686C9
-:10CA900077803F6F7C5E26CD1AFECCA4FF7D1B8580
-:10CAA0004E2A3E2FC59717389EB6011EED80AF5E09
-:10CAB000663F85BFC27334EA77BF14D0E1B1E0C9E5
-:10CAC0000B17C5D338154FC0A7A0A7DA8B452897F9
-:10CAD000B409644046FF79C2FEA4566E17EE3DC607
-:10CAE000FA7F5AC07B4B8C7CABCEBB1FDFC6E057B6
-:10CAF0003897067ED1E5F2EDD706BE7DC3DA7B24FA
-:10CB000007F876AFC0E207ED09BAFDC5C156B6FE1B
-:10CB10006FB552FE867DADC3B267A3BBBF7CC7F1C4
-:10CB2000F50BEC7EEDB9A4AB602290F7B8C5827925
-:10CB30006408C73066576AF5EA362B19786B6EECD5
-:10CB4000FE5379FFB1EC1AB53C1AC6837CAF363A76
-:10CB50005E66643CA35E57FDFC4BCD6BD4DF39AF02
-:10CB6000BE3C4CD289FB4E1992EF51B3260FEE36E4
-:10CB70009E67442140FB4A532FCB72917A24C5858E
-:10CB8000E79FEE71A97CC6F2DD8B781EFB5471E243
-:10CB9000BBB07E7EEA65FB7CB926F2FB89A09F27AD
-:10CBA000CB788EEFD32332C66B3F9DC2F2386F7ABB
-:10CBB000FDA004719A9B4039517CDC344E407F05C6
-:10CBC0008E61C1BED92E6ADF7847E17C72E01C57C6
-:10CBD000F6A68602387F3C764BB00E9E9E82DEA47F
-:10CBE00037008F93440278ECF40E2880FB93EEF923
-:10CBF00033C1FB43E83A8BEDC7769081506F827763
-:10CC000020BA03E35BD717407C74E641BB1DEE6797
-:10CC1000C96C32519F2182BF09245807FBEDE38F75
-:10CC20007B6F0178CBA8BD0071E7B2F6E63A279496
-:10CC30009B048F9BF6EF0FF80A9D741EDB1A3F29A9
-:10CC4000FC0EC823AD07DDF89B583DFF26B87808D9
-:10CC5000DEAFC33C9B924D021EFCDA16148885F5AC
-:10CC60001BB4D07EB735D1F6B9B04ED0F6D0EFA612
-:10CC70004FDEBE05E4FD88C8DAB7B07DEA12DACE31
-:10CC80000D7CBB6911F6B7B0492029B4BFB216B606
-:10CC90000E941D913DF0BD75FF13B88ECDA0E3A598
-:10CCA0006680DE0F4F8132C9115C18EFAC1C8574B1
-:10CCB000EBE1724E268E64FA43E065EE37A876D338
-:10CCC0003B5696EF5BE259AA0CA0FDBC913F3003A6
-:10CCD000D202FC6D9FE0FEF3718A671FEDF228CF50
-:10CCE000DB3898FF91D2A559873EB5B2FBADE6B7C8
-:10CCF0004DC27C8605A408F3196E1CCFECB537AF86
-:10CD0000B506E18A8337E5DE34787FF05A33DABF3F
-:10CD1000E7B6C9C847E78674617CFA64938CE786F6
-:10CD2000EB9AD8FD5C275BD83A2E3ECDF6F54B1D2D
-:10CD30000A960F36DD5208EBDBC94DECBC63C1D35C
-:10CD400053152897360B1E767F11D38FAAFF56E214
-:10CD500062F908AAFEABE2F3EE97B768D07755EA1E
-:10CD60007A63D07755B0AFEC84A7FEBD9FD8991EEB
-:10CD700004BB1FE81EFE0AF9B7FA884CC0EE173E46
-:10CD8000EA2EC47CACBD02C6F3C7B70B5ED8D72F62
-:10CD90007BCF1C447B35587CF74F408FBF6F26827A
-:10CDA0001BF2DA29DEA97EC837F7FEE917F4FDC7C2
-:10CDB000472D900943F9A418F1ACE67FE66E667939
-:10CDC0002CB947D727C3794B326500EADBD24691AD
-:10CDD000F8347AE363C17BCB8F995EC6FB2954FAA2
-:10CDE000E52A0D25B08E0DB731BDE4DE2C438E084B
-:10CDF00039CCE324D49EC6F3B70B77AF4B5668BD4E
-:10CE00007A9EFFB170EFBA6491BEAF83F58BD65FA7
-:10CE1000A8B0FE17EE135CCD9AFED5F66A7F6A3F86
-:10CE2000CA6E7D3FC3F7F2F265F6A3C2A18E1FCB97
-:10CE30001ECFFFF70BEBE1BE98FC37454C3ACEFF17
-:10CE400068C670ED7E87FA54E3AF796F9B8857838D
-:10CE5000B7FC3FD98857C317ADE3A87C53BADDD0E0
-:10CE600026040194D671C794AA5C2CBB409EAB7972
-:10CE70009CB67A0ADBB76ACD3EBA1CE47B46AE802C
-:10CE80007C40023E654012DA416ED85F28CD65EDE8
-:10CE90004B697B90BBD627981C527DE0067D51DD07
-:10CEA000B4AE10EB6F12DCD07F6B7331AEF765F967
-:10CEB00022C1EF9B8EA1FD51D6762C09E495CAE7DD
-:10CEC0007A587FAB279AF13E2F55EE54397E53E6C0
-:10CED000F735595CA321AFFF41002A8AFC8A470835
-:10CEE000F3535B6494337F3E93CB37B78928CF07E6
-:10CEF000AFBD1DE5F0DC6621861C1728702EF96495
-:10CF0000907DEF93E3AD029763A61F4EDA995C170D
-:10CF1000C07790E39D02F707993D689463552E2FE3
-:10CF200025BF155B0CF21C436E3BA5AE5B61DC7B41
-:10CF3000AEB522DC05DFDFFDCE3DA87F64CCFB284B
-:10CF4000F8FE03C9A0EF4A2496AFA4E2B14A62F901
-:10CF50006CFDE058BF5449BD2C78F4703C657544B5
-:10CF6000F487087CCEEEE10A6C9291CF8D72F8F7CF
-:10CF7000CACF3F4A9E0F73FE51E111F7B2F6903FC0
-:10CF800016A678FA6DCBB398A77AF6856337029E1A
-:10CF90002BF650BEA5F33DD7E2E0F7BD04719D2905
-:10CFA0006F15310F9C48E1BC5B1C5AB96479481578
-:10CFB0002F39903FCA77B07CD2F2973F1A837922FB
-:10CFC000CB7A31BF2AF002B737035D6380AFCB2540
-:10CFD000960F6594F35B6DCCFEECDE1D370BE621FE
-:10CFE0006C61E7F4CB43B7CBC0876ABD1FDA64B589
-:10CFF0001EEE5F0628DFC2FE3AC0A73D77AEE641CF
-:10D00000756F65725FDE26A3BF54BEA519E3D8FE17
-:10D010002D9F609E7BC14BDB307EE06F13F5798FD7
-:10D020005B44DCC7A24FDCAF32E61F56B756E17E49
-:10D030005B7588E7F719F2DF2A5EDAFB7280A2A639
-:10D04000E2D7CF3B410F9CEEDCEC047CD2FE306F8C
-:10D05000F0FB9F49BABCA8D8F9BD5E7D3E6168650A
-:10D06000D47CC2D3F00FCAE00FD838BFAA79985B3E
-:10D0700006F03CED705E5194F87DDFB99D6D9F3FE9
-:10D080000379EEDD3BCE3C037057FEF5D367209F5E
-:10D0900089ECB3E2BAE47FE1F79827ACB6FB858D63
-:10D0A000FBF95B9FC7FCEA73EF9BD1CF39B7F764FD
-:10D0B0003AE4AF9DDBFE5532C4E3EEDD3B15E3956C
-:10D0C000F7EE2C1844A2E877F5097C19BC8CFC6EAD
-:10D0D000231D0EB61EC4BCABB3EF99519FF5E58579
-:10D0E00086AA589EAD9BE783B644CFA357F318ABEF
-:10D0F0005B6FB9E95AD0CFADCC9EEBCB6BBC541E65
-:10D10000E8DB949ED75C06DD5A789EAF816E67E1BE
-:10D110001F943E2103DD3E6F5DF0AB27E15BEB80AA
-:10D120009879A0E1CBC0979AA7FF739B778F0DCE1C
-:10D13000FDED880BA4307A05670860EF7D9E0EE751
-:10D140001A4EC9BD98EFD1BBD7EC827CC6F2BDEFB9
-:10D15000A27C9CDB7914E3AA84E7C99F237D7F2C02
-:10D16000AF59E0F3DBE460F9A31CEF905FEA76E2ED
-:10D170007B9E47CAF856CD2F8D9557DA6B1BC6E2BA
-:10D18000D0FCDC4015F593F8BD597DF9A6423ED0A0
-:10D19000E9982E4F579DB7B13F17D79B91FCE8E810
-:10D1A00079BB6ABE60844E6C1D51F39FCF35F3BCD2
-:10D1B00069FA3E6D2CE4C1B1F5DA1F14DE2551E4A5
-:10D1C00051CD8F3E6333E445072F2F2FFA52F0FEE7
-:10D1D000EFE2E3031B8B57AB78E9FE26BA3E56E23B
-:10D1E00098DD49FD53390EF705987F7A37F74F558B
-:10D1F0007CA9F0D68798DDD0BD85F9074679AE8E3B
-:10D20000715F52121FA7BA6DFF18D03BDD0776730E
-:10D210007E63FC5CDD728CE5DD52FD1CD4EA677E2A
-:10D22000BF84B1BF74DE9FBF3D7A7FFE964FA2F6EA
-:10D23000775AF2DE0EF09FEE6476D2E990382DDA5E
-:10D24000FD36963859973F50EF60F765884E1BDAE8
-:10D2500047F73AF2DF8B4F82A782793D754B791EF3
-:10D26000D0CF3C78AF689D633A01781E02FC68E23B
-:10D270000CB2CB47C04E93538A72457704DE3E7A98
-:10D28000249948504B7F299C06FAFC83EC9332F496
-:10D29000F79F86F8C87F4AA47E1085EB3F0382671C
-:10D2A000A93BB65DAD967D3F1575F18C6A73EF07AE
-:10D2B000609F9357ADB81F2EEEB306303EF60CBB01
-:10D2C00057E3E0CE2F9FC37B797E6526DC2E14408A
-:10D2D0001F94F238C5C99D5F3EF35F604742633AD1
-:10D2E0007EE933B43ED8CF2D7168EFF7EC881F0389
-:10D2F0007180D2571FBC11F44529E83EB0335F1A44
-:10D3000014ACA3FD9D18C8CA27B60DC17301153B07
-:10D310001C984F7870E7AE6AD0F7E75E8A23A0EFDB
-:10D32000CFCA5D7F85B27F4F3C6976A3DDE7D6AE7D
-:10D33000AB0B89E4D6DA731550D6E5B710CC6FC1C4
-:10D34000F81BE5E78AB6783CFFA1A9C7E539309814
-:10D35000DF133518E48EDA8D6E7DDE33FB3E3F8EB3
-:10D36000E92FBFB9F77E761F02ABEF577A4B58B95A
-:10D37000613093DB4EACBF48E557FEBD7FBFACBE0E
-:10D380003F8EC50322FDB0F6D56676BF8691BE3FBF
-:10D390008D13F879DCBF5C19EDFE8928F0B37BB9F9
-:10D3A000041280FB57C9762BE669552AE15190AFEC
-:10D3B000FEB2C2F63F2A9DE15190AFBE87EBBF4A55
-:10D3C0001B2DD3F783391C501FCAC4D2F522DEEBC4
-:10D3D000B4CB8AF7E155BDEAF0A29FF0F297279E01
-:10D3E000CA857CB538CC93AE7AF55F90FE55E6F0F1
-:10D3F0005DC0FFBDDBCD783F69F7F6C3E9603774E8
-:10D40000CBE1F4C48BECEB5485CCBA7D6A751EA7D6
-:10D410006B974C8073BCEA39C3F218FAE2F5389680
-:10D42000D7D11CE7FD15D373FAFB654ED7CED2DDFD
-:10D430009B586E89AEC75A402F68E27862E45C61FF
-:10D440000BF47B9674D50FA624A9127A717FBC7C4D
-:10D450004B461AF8BB07AC57E2BED501D98DFE206A
-:10D460003CB5FAF854AD2747C2F3F499391285A3B5
-:10D47000A7F99392C104F203ADB3A2E9A7BD7171FC
-:10D48000C84FE51673D4F39BBFE3FCB60DE46D1CE7
-:10D490001BCF931519F7801C54008E897637CEA7C1
-:10D4A0009CFA01EC9EA8D939DA73DB0BA506AC47D0
-:10D4B000E50BF1B190AC5772EDFDF5CAC225B93953
-:10D4C000520E2AACAFFBF84D8CD0890492D04E920C
-:10D4D000380DC9FA545DBEBF241759005F0A29727E
-:10D4E000492290BA01E5D44642F8B4533384AD439F
-:10D4F0003504E2E3A7F8FEAC59723F8AF7CD748891
-:10D50000A8CF2F85B777E39C08B759AA211EB43757
-:10D5100066B8C01E13023EF22DE587BADA6939EC0F
-:10D520005C38F142BE1BA6BE51F89CAE435F817DC4
-:10D5300040F98CDD63F57D12ACA3E3C131638CFF50
-:10D540004D66F7D91BC7FB86D38104F6EBEE3B870C
-:10D55000BF5EF5FE3CF0D7E3FF9A0FFB317617096B
-:10D5600083BD146727E1B831704F9E745A2BBF4EAC
-:10D57000C2CAC3283B835E734DD47F37F235F1486E
-:10D580009FF5E94511DB7F6668FFD9C5DAABF8F096
-:10D590005B367A8EE744F062E373084CF65CE8028F
-:10D5A0007C8C717AEA808E4AEF070F023EC6D899CA
-:10D5B0003F98D448B4FE5A8E9DE9ABE5FCFE69FA6B
-:10D5C0005764D7F4475C168C8FAEE478EFABAFC6E8
-:10D5D0004DFAD5B74A80D77EF5ADB1EADBA2D77751
-:10D5E000C482272E3A3C0931FA0F44AF5FFDEABBF3
-:10D5F0006F84DDF092E90D08CEF373CB3976F0AF8E
-:10D60000E23F482E665CC1F6030C74B301FF517E05
-:10D61000B08DD0BC87FFCBD2D06F5814FA9330F2C4
-:10D620005D31878796EDA914BE1F7370A76C62FBEE
-:10D630009573EE6571A21F5B587EE9317E1FD09C09
-:10D6400046E657CF59C2F61149193BE7E3A2FFC19D
-:10D650007877422794DE773608C17006DC5B63B0CA
-:10D660005FFBEEC759A840FD6243DC45E527F53C6A
-:10D67000D23C6E5F6770FE5C407A1D20F7C673EF88
-:10D68000AF71BDA6EAFDC03A9209E7F64593CD0316
-:10D69000FBA3223F674A9CEC3E3FE21DC2EE97533C
-:10D6A000F3B832DDF1B0BE91107FCFF759165FEFBE
-:10D6B0001EA43DA7255DB0E1FD2075B22705F4A0AD
-:10D6C0007C81DA75D455532E0C236ECD39326ACF56
-:10D6D000A170CB2E765FA2E42A22A56007F2FB019F
-:10D6E00048D2F43EBBEB4D8A87C5EBDC786E758182
-:10D6F0009DD999BF7014DD631F07F665BE87DD7382
-:10D70000ABA76360279B5F1DCC2FA33FDC758AC747
-:10D710008376E7746A31601CC783BFEF209ADDEF20
-:10D72000BA411EFF4D66BF57D00F0F8C7EE7931294
-:10D73000F15EF6F9CE551F009FAEE6F711AEA8CD0B
-:10D74000C4E7AADA14B43BEB6B3DF854F162F13450
-:10D75000E0BD6F9611AC3F8BCBC7EC0A6ACB403E65
-:10D7600085E4AA0943D9925643C0DEB5F6E1A70184
-:10D77000F1A3F4957D5836BBD8EF46C88D3310CF52
-:10D78000B43D29A5DF173B7C4F829C58DD57EBEE5B
-:10D790009133A78C35DC3768C09BCA1FDB18FED6D7
-:10D7A000088C3F8CF85B2377BA615F79CDF57DF704
-:10D7B000CE20FEA879CFF0F73BB6CF16137FAE444C
-:10D7C000B45FE7E7D5DF55475F3DC2F7171FAECD22
-:10D7D000477CADE4F7483E54EBC5A708F8A3F33304
-:10D7E000670508DC8FCE7E1B823EED455EB87F1656
-:10D7F0007817F027DA193ECD2935B8BF66B1337CEA
-:10D8000089F600E245B6337C8976C66F0A2F4B80D5
-:10D81000BF1C6C8FEF29FE0E007F59D226E8F0A5C1
-:10D82000244DBE3CFC3D41F147E148E2F265C44372
-:10D8300092C2EEA754E52A961DF7389D3FACDB1B3C
-:10D840006A093E07C6F0178739D8BA9964AAD92F52
-:10D85000033E12095F4F02242D8FB0D443F84B09C9
-:10D860001037940506076918A2BB57527449867B86
-:10D87000D9DC1B800FD61F964D902F2F2E99AE3BD3
-:10D880000F2ACEF226B8119F3EBCA7F9915A37D283
-:10D890006F1DD011EE01E5FED7439C9E0FF37B2850
-:10D8A0005772F958C3E5E5512E2775FCDEE4D5D350
-:10D8B000589E5552B689DF571626DA3CA6044F8883
-:10D8C00028142EB4A9DDF8C47B16C97BE6E048DA3B
-:10D8D0002E2E8B78814F12DE7B20C8EE6B2C4A05F2
-:10D8E0003B2841BD7F71A23B61361E840D4BCCEFBE
-:10D8F000A0AA10FD984E53B47BAAEA3C072C100F47
-:10D900008D054F9CC79BF1101D2FAED181F6FB00FA
-:10D910005FD1EC05B46C6F8CC3F85F1CFF7D163BC8
-:10D9200085BB5443EF58F7506F745C1FEFA0F4743D
-:10D93000018CF4F958E370FC5D96C7E522FC1D9755
-:10D94000C7F97AAADE73AEB6FB9AEB4767EED53A13
-:10D95000BF75BDECC576AE897AF95FCFF56DE2147F
-:10D960003D9FABFAF6789FBEF50D0378922F4C41A0
-:10D970003D96747374BD5B272B786F79DD6826E75D
-:10D980008162859D6BE9AF07304E7DDE376A23E803
-:10D990005195AF9611A67702C4E6C17588DF6FA3D3
-:10D9A000DAC12BE01E40AE5FE1298E60BF3F903CA4
-:10D9B00087DDE7BB9ADF63B596F215C17B4F3DF873
-:10D9C0009CEE60FB13CB2C63F13EB53ABB09F584AA
-:10D9D000F4BE39082687B47FBC0BE20592ECE9F46B
-:10D9E00042BCCF2185E0DEDC3A7B2EDEFB2E24E438
-:10D9F000BA80FE5F38E60FBD583E1D9D28DE97E9D0
-:10DA00004A2A221F66E16E009E5F915D3713881BD4
-:10DA10006E48AAB102DEC63B585CBFB1380FF14870
-:10DA2000F17B936360A49F41B3A6F7DD8305DD6EB0
-:10DA300088710EE60E07B397485A808CD0C879A338
-:10DA4000FA3B27EE00C9D4C8FBB2918504F687FAE9
-:10DA5000CB790C3DB699E9B1E542743DA6DA99AAB5
-:10DA60001E930DFA417DD60F9DA63BA7A524798074
-:10DA700077E1193079C0BE7BB9FE8E04C4430DE056
-:10DA800081A44CEFF35F7F300CECC7BCA8FC66D4DC
-:10DA90005FF3FBD6736F32D0E994EC1E341BF8E9C8
-:10DAA00070F4F57CD263573D0A7C30FF77A2A0DD8D
-:10DAB0004F29BDB002D7D3920BF9F82C6B9C867C12
-:10DAC0004F200AAEF1C34E36DDE704B84E36F23CC5
-:10DAD00080263908F919271BEFC3FB4A20CF5BD4F6
-:10DAE000ECEF935C37DA97EA3D632783F738B5FBB1
-:10DAF000BB25BFB07AC16E8DC55F254DD1FD7A586B
-:10DB000043217E4A01CC047B98DA37BD61B07F3671
-:10DB10009A3D011229071EB346CD4F5CEC98FA38A6
-:10DB2000E07DB1C3FB34C839B1B37B4163F3391B2A
-:10DB3000F7046C02C37ED3933C4F53F239B5F7BB65
-:10DB4000F5DDC7C9E324C412E3BB4DFD7D8318DFB7
-:10DB50009D2C9F83B8A27F57FD84B8889FD006F381
-:10DB6000A86A3C53FF3EE289FB091CEE533283FB5B
-:10DB7000D47366F63B3706BE38C5F347160A0CAFBA
-:10DB80002A7F9FEAB3777C780F8D91FF848D576D44
-:10DB9000184FFBFDB443C6385C25E51FE01B61E36D
-:10DBA00078CC5F171E1BFF28E4257D7644C4EFE583
-:10DBB000172CF8BDFB679E0D7320CEF3BA8CF7755A
-:10DBC0007FD631359EC579F471E8054EB6CE9FE615
-:10DBD000725F726115F2671F7F342C5040AE4A2E7F
-:10DBE000AC457BA6648B80F7449240EFA14912E7D5
-:10DBF000C309D0FE6CE132C0F7C406DCDF28DD6C5F
-:10DC0000F6AC12FAD3F9B4C3ADBB57BDB46B35F65D
-:10DC10004BA83D95A4D9EF3EC5F3804B2FB0FB0137
-:10DC2000892B405280EFB9DE89F0AFFEDED76E6BF4
-:10DC3000F438FBD7DC9E29B93041E73744E6F77D5D
-:10DC4000269F7C3D2FEDCA6770F5CD67C3F868F35A
-:10DC500089CC6322B6EF4E883E7E06C7F389DA325E
-:10DC600038B941CA1456AFA4E13E05F449495342BC
-:10DC7000A2A099576963852E0FA3B4A95899ABE95F
-:10DC8000374207DB6F278D88D02163AD7CDD323BC7
-:10DC9000ACF7450E278CB77161DE4FDCD01FD33F48
-:10DCA0001FCB0DE935A85FEE71463BD790E174EBD1
-:10DCB000E24AA58D9C3ED44ECED5D047A58BB1FD72
-:10DCC00089E6D2BC9F403CF909762B486CBD63A025
-:10DCD0005B4674BC4DE8C35B26E6035D1A6FDFD17B
-:10DCE000E5FDF4C31BA7AF8A17F53DB58F72005F42
-:10DCF0001320E03410FA61F4BF14BE22E372FA4F2D
-:10DD00008A3E0F5FDF3C969000B51FE65F721E0FE4
-:10DD10009280E522F350E94FAED6D1DFB776E475B5
-:10DD200020872ABDE71F7802F9773E9547D8973FAD
-:10DD3000D9709F6E7D88C01783EE2302242BEFFFDE
-:10DD40001CDD3F9603E990F71558C7D691531B1F6A
-:10DD500049D7E279B163D202A00BD934F0B2D68FA1
-:10DD6000C0644F871BD72519E361BB1D3EBF93BE1F
-:10DD70002FE37EF5F284C251D1D67DEA174E84F8A6
-:10DD8000735DEDB489106F93B9DD08BFAC05F6265D
-:10DD90005C811EED7EAD064ED7876A6B307E4D2CC2
-:10DDA00001E2D29EF725CC2EFA9AB0788BDA4E910A
-:10DDB0007D2E887F2A0229427B4EF2ADC8C8853865
-:10DDC0004652764083BFB54E66D7AD4E39E0827C71
-:10DDD0005233ED1FE2319634E9BC7E9F9295B385B4
-:10DDE000F132CC474E0A118C6766D1F71A7C2B4969
-:10DDF00014CE8BF89B92C589FB451261769A3A7FC7
-:10DE0000FA06D7B387F9BAB40CE2B849608799D05B
-:10DE10001F5ACFE394BFAC2DE27890701D3327B02A
-:10DE2000FA4A3C83DB0A716B11D6D530961D70C35C
-:10DE30008E885793E1EF8F261037FE4EDF0012AE2B
-:10DE4000C77B4C2675DD0FEFBD71BE2DC0075FA4EB
-:10DE5000767E20401CBAC87725ACBF8D6220DB4D92
-:10DE6000EBFF4AECCD867AF0FB5EEF25B2E750C8B7
-:10DE70005BF669F6A5D8BD9C6E6D5CCF581EBA44A2
-:10DE800032ECD77C73A5F67B739C7717C091F49125
-:10DE900080FB30755676AF4F9DE3B67858BF8F72D2
-:10DEA0007A21FD817F3A981D735E72C727627C33A9
-:10DEB00033E735DDF81E5D59E2FEDB26CA8F92E6B8
-:10DEC0005ED61192D704FC32B281BED7D22F4A5C03
-:10DED0002DD18ED7DF46DD8751E1A3E312C09F78B5
-:10DEE000A190ADAF063ED82330F8030EEE6F9180BF
-:10DEF00008F49CADDE172C2D6765F5F722808A1497
-:10DF00008EF7D5FD05B29C95F93EA57F2EDB8734B3
-:10DF1000C233BBFDE14E88EBCF6E4F9D07FB53B381
-:10DF2000EDA3FE0CCF3D72EF8138B003EF13F0FC90
-:10DF3000C78F7FFF9A1C479F3BDFDE88E78DCF723C
-:10DF4000B9BB8BF4E23DEC3EE2E2FBE4417C3F17DF
-:10DF50007E600ECB2119FCF439E1E08F6EA0A53B69
-:10DF60005F0BDE0066DB5D1DBDBF0135E00BB90A4E
-:10DF7000710F406DD7E639C4CAAC5D040F166E8FC1
-:10DF80005A705E91795B100FEFF7E58D07901E7D5B
-:10DF900078E2F72AA978E99B77FC6DD321CE1B4B59
-:10DFA0009FCDB667FE996D7E30B88C78FA0C3E51E5
-:10DFB0003BF233A7D71A4FF5DB474EAF0D9E959630
-:10DFC000DE746918CA8B13CAD5A26F6832C5C3D96B
-:10DFD00021BE2B07023E3A075C961EFDC0CAF40024
-:10DFE000C94DC7F9A8F7BE1F7CE0A403ECCEFA9D8B
-:10DFF000EFA6C3B34AEC5A733BC63745F487CEB796
-:10E000005E79D1F3611F40DC89AE7F23E3553E6426
-:10E01000F3BB9B9FAFB9BB350ECFD7DCBD44D4DD7E
-:10E02000DB7CF712967747A4CE31B7EAECF5E53101
-:10E03000FB813880B19F794B26938F06C03EAB6B36
-:10E0400012C6059E61FC356F8A57847CE4092B0457
-:10E050008CB78C3FEE6EEBA2E579C104FCBDA379D1
-:10E060000F2CCE817B08AA3B597C6F90B828FB67A8
-:10E07000103F39C0D671282F02F9B67BDD764DBC32
-:10E08000BF5BAEC9867BF70277DABDC03FC5B77A02
-:10E09000DFC7FB1C781C425D57773516631E6BF19A
-:10E0A0001C773ED0BD3864C5DF1F2CB610C946F5BD
-:10E0B00058B1442CF01CA410C90A4F1BB1C0336FD7
-:10E0C00019BB27BBA47126DA07CEFC2205EEBF2DB3
-:10E0D0006E7FFE73685F2A85F7B3732D0C3FC5ED25
-:10E0E00087BF02FE59E02DC2BCC3EF6C5174FEDF46
-:10E0F000E890BE7C4D9BBE9C1DD697733AF4E5AD6F
-:10E1000070C799C68E38B0D78CEB44C519764EEFE0
-:10E110001501D62688079B519E0A2ADAF3603FFA3A
-:10E12000CC8B0E137CDFF317E6F7F66EB5E27D6F4E
-:10E13000FBFF602336C82B7CC9BA11BE9FB185F2A4
-:10E14000200E47EBB3DFD92A0A8D02FFEDE5AB5570
-:10E150003F3D3806E6F5F25F599E4CEF5633FE7EA2
-:10E16000CA99DDCFBF08FB6267B65E8176D62B42C7
-:10E17000C004FD065632FA1BF9B4628BDE2FBE3F97
-:10E180009EE99B1E81E1FBCA46FDBCAF0AEACB3F7C
-:10E190008F67FED45CA2799F01FBF7EEFA14585703
-:10E1A0009F8D7EDFF0435C2E5E784151F956E4F797
-:10E1B000B311B7E6FCD29EC8FEDDBD57405E05E058
-:10E1C0006258E47D85615CB5FFA278B60F9FC4F705
-:10E1D000677A5F17113FA70DBF5BD867D7D5D6A465
-:10E1E0004ED1AC43258DFB938BC13F6ADA9F3C57E0
-:10E1F000B3BE546E3D987C07E62549F8BB4C95B3F9
-:10E200009F5B3B2109DE8B218017BE43DCAB3BF4D7
-:10E210001B27D4A3F6EE585183F7D2C6FB52A7684A
-:10E22000E4F46FE54B559E2AB97DB22BBFB310F2D3
-:10E23000C42B1AD9EF3755847E740BFCFE22696219
-:10E24000E74CF324522452F9A9DCFEA31FC2EF715C
-:10E25000F99F1EE701786817B7C2FB8A964FF03C1A
-:10E26000C12AC3EF08A8CF7D9CBEB47ED844EBAFD3
-:10E27000BACD5E06FA89F6FB1A940F646EC4FB4DA4
-:10E280009CA7589C96BE7F0F7E12E5D4E4C01B77F6
-:10E29000D0A66748E89D1B3260DE7A3EA37C2B80C7
-:10E2A000DDD5BB59C0DFB5A59656DECD60527B9754
-:10E2B00062DE2DFD7E77B4F3CE0B83FA7E8CF4FF05
-:10E2C00003E75FFA97A9E52363BD013302782EB116
-:10E2D0007209D5771A3BBFF27803DEE7681C078323
-:10E2E000709A7C03582FDD28DF56F5FE21C192C7B6
-:10E2F000F36687B332DE5B08FC4A19A5E26A32C5D1
-:10E300000DF8BE994C83E72B4278AD28323D8171E0
-:10E31000A06D71A827BA5D5DCF3D05FCD5321AE32B
-:10E320004F83F979CF6E7718EF79ECE1F1C96E1769
-:10E330002B97B75B310FE6CC5905F5E8D2D04127D2
-:10E34000D0A3FB45AB097E97F4CCF60193214FB2E5
-:10E350003BC4EEFF3D1D1A80BFFF1A6BDD32EA039E
-:10E36000759D3C06FF84F534DEFB35ACB76439CBD4
-:10E37000231D34A0263BDAEF49A8ED92949A6CF065
-:10E3800053FE17A753B28F00800000001F8B0800B8
-:10E3900000000000000BDD7D0B7854D5B5F03E7316
-:10E3A000CEBC92996466324926218F09841020E000
-:10E3B00024860814EB24040C187542D1A2B63880C8
-:10E3C0004080BC44DB46A55F2624424251428D0872
-:10E3D000087140B1F48A6DB0A8C106EF80F86AB543
-:10E3E00037DADE5EB5FDB92370295A1E23F452DBFD
-:10E3F000DBD67FADB5F799993349AABDF7B6FFF7DC
-:10E40000FDE9478FFBECC7597BADB5D75A7BADB55E
-:10E41000F744BE6EF1EC2D60F01728509C8C5DF235
-:10E42000BB3C9BA0BC4482573318333A7C465B3AD2
-:10E4300063D672C6BCF0CFF186BC5786FA53B2E7FA
-:10E440009BB6718CDDC57C0686CF72BF818D853E03
-:10E450009DD0388BB1650A0B290E782EF4BE2F4D56
-:10E46000A53263D07FD92E29D801FDEFDA6C64CCB8
-:10E47000C4E8EF33F8B7A217CAC5B1F22A16343090
-:10E4800019FE63575C3B187F95123A2AA530B6DA1D
-:10E49000C442C930EEEAA7B4FDD6B010C1D370E0D3
-:10E4A0003363FCF8303FC600B4FF64EABCBC6EDBEB
-:10E4B00034C69C0628C3BC236FEB838887FF907DFE
-:10E4C00034AF35CC4FE3DCDE5AC54EA531D67C5F88
-:10E4D0006BD65DF0BCD87A7FD65D57433DC201DF75
-:10E4E000B730DE9FC1BCF601CED654B3502EC0B7B4
-:10E4F0001CE69B5406E541293405CB26164829E342
-:10E50000EF53CBF87CBD71F0D5B31EFA5EFD2EED56
-:10E510007BF68B34C267031BA27AF6545C3DE0A302
-:10E5200041E0A1E100BC8FC3C3CC0352C07A159671
-:10E53000821D19005FD359C63641A9E9D06746CD7F
-:10E54000F8AC8731C04366126366A0D7A3125BD4D0
-:10E550005F42FD26D64D8136F8771D96DBA9DD0991
-:10E5600081BF476F5991E587765BEC50CE16089EC8
-:10E570000EDFD0E1C7A91C32C17792AE8E96A9BE3C
-:10E58000623D2FD7D98A6BB6E730B64DEFCFB201D7
-:10E590001297C9BED77480BF271DFE5B90DF96E936
-:10E5A000BC790ACE97798B7C00076BE57878ACACA8
-:10E5B00065624B490CAE187C9CBEDBA4FE900EF845
-:10E5C0002C7058F2EC7323DF46F47E4BAC5DB34DF8
-:10E5D000A279A41E0BBF3606E9FEBCC4F642BB1DE1
-:10E5E000D287AF8D817E3BE6B95907945D4027B94C
-:10E5F0000CDFB34E09F0527EA8EEEE5791CEE549FE
-:10E600009EF1F0683C5429375A68FE77FA009ECC98
-:10E61000E4963D3AA8CFBCB3B80CF91BE67DE702FF
-:10E62000787FAFCD4DDFCBB270BABBD6070AD69696
-:10E63000E0F77D77BF0ADF8B4C49F2E0F7330157F3
-:10E6400056073DBBCCD88EB54BD8EED1143E7EBA22
-:10E650004EBEB30ECB65BCEC582779F712F36DA50F
-:10E6600079671A590DC289EF8325B464BC07A93EA6
-:10E67000C8E93BBBA514C7CB1CC79F4E432807C79F
-:10E68000794BA5F760968E6520BCF0DF00CFBD0703
-:10E690002B331DD0FFAD732645970A4F176343D820
-:10E6A0004E0959183E0B8B797B93685F3A3B1317E1
-:10E6B00083334FDBEEA2DE9B7A35E025F08ECC90E3
-:10E6C0001EBFB37853EDD0EE4B063E8F443AF62191
-:10E6D0007D603ECD9F02E46971745B74C580E33553
-:10E6E0007FAAB0E0D5B1F7E7DA4C2C58142B37D419
-:10E6F0001F9B8BED1AD9D006E4ABC6FE64168CE3E3
-:10E70000F72F258DFC5D95BF9B3FD5B1401AB16FAA
-:10E710008ECF8AF8896C588EF01F91D83E86F50608
-:10E720001688FB7EF3A70E6D390A67068D136BC73B
-:10E73000B4ED067E4FEDD8F4700A7EE7822D9CE2A0
-:10E7400010F3C37ED9326B41BA5C0CEA027A58C727
-:10E7500017DCBCFE226335FD96587B75BC0B8B0C19
-:10E760002C44788FD0B8889700C8B69D839F18DC5A
-:10E77000506E183C4A7851F9211E3F8138B991D129
-:10E780003114D2C19AFE856D5557891948714C5D77
-:10E79000BF6BBABCB3A05ED669D6737279747D9331
-:10E7A000587954270B79D0D0553D2BBECCDBC7FA16
-:10E7B00037D654C3FA2F2FE1FD4FD89ADE58AFC495
-:10E7C000E411CC230FF1122D9B12CA16284F892B6E
-:10E7D000DB12EA9D09F5AE84720E6F7FCE1ACA93E2
-:10E7E0003D8C7D645B5BA3807C3997155A2C417905
-:10E7F00073C7BD35D520E71ACB87BC32CACF41C914
-:10E8000023B118FE9A3CCC1B04FC593C61C3B212E4
-:10E81000C4C3D06BB8FE1B06249B047C6EE93F1872
-:10E82000A232F673C7F5EB97A85F43FF87D46FD486
-:10E83000F18B75B48E37159FA4768000DB69A0D369
-:10E840005799C45201A5058AFF8FA8BF1AFB7FC341
-:10E85000F52E8B18F8FCB81CBC90E57D85E4E01122
-:10E86000C986EB2ECA7738AE25C6EF6AFB5F4D1915
-:10E87000FC571C26F9DE4FDA1568FF7F1A7F338DAF
-:10E8800001A97E854D66A05C0D4E447DBC93F927A1
-:10E89000A21EFA7AE3F8A33A6877421FDECD005F42
-:10E8A000C5F64D350AB43B610DE74A2043266DEDB0
-:10E8B000E5E5F4F06EC46760EBA384DF13B9E15CB7
-:10E8C0001D94A7DA43BC3C3EBC1BCBB76E7D86973C
-:10E8D000A7847365E83F3670A0A61ACAFB6C23AF05
-:10E8E000D77C3B97E32A7C97C779B3EDE9C8765C80
-:10E8F0004FECD603C6401E2E5EFDF1B3FB000F8B1E
-:10E90000EF4F2639B5EFDC57E6FB68FE019F520159
-:10E91000F290B33ED763248F15B203B250773962B9
-:10E92000F4B0E60DB949CE4F6A3988FA3E737109E1
-:10E93000C9F94F53BDEDF669B1E72719F00438DA8C
-:10E94000ED362E97659D97DA3F6025BB678B99CF93
-:10E9500007D60DD1D722E8512EE6536ED7D133CF4B
-:10E960003687C6FB40F2EE30C9F8640133D27355E6
-:10E9700012D91977EC01B90072B957C0DDBB7562C5
-:10E980003000E3DF21311FCA8D5EBB370BE5C30BBF
-:10E990007F91EFC4F9F69642199E3F16F2BEB7CEAC
-:10E9A0009B658FD38BBD7B78BD2A777A0B787F559B
-:10E9B000DF6476F0EF646E99B817E791AC302F966C
-:10E9C000972F2ADADB4E7A7B01CD9B79BD5912CC89
-:10E9D000F7F4AAB13AB42355FAA4157A6FC2F9DC58
-:10E9E0008EE35B627452BFDF8EF346BD2F83DE87FA
-:10E9F000F93EE0F0D3FCC10E984A76A0B003DA717C
-:10EA0000BED362F8654A781ABEFFFF084FF760FD73
-:10EA1000FF144F23C88B00B66B6C0579A18B93173D
-:10EA2000027FDBA4903E93CB0B0FEA397CBF00E45E
-:10EA3000E3ED36FF468447FDFEE2071AC9EE53E1D7
-:10EA40004AFED68B355F65C3D759A25D76E203D304
-:10EA500066067AEC84A19FE4E289F9CCD38EF24376
-:10EA6000C7EA118FAA5D5971FF9AB718D8B397ED0D
-:10EA700032D1B95BF266E1BCBA81AE26D4C37586E9
-:10EA8000E0BE82985EECB50777AC40BADE52E20990
-:10EA9000B8493FD27A0BB42653BB5E7B9829583FC6
-:10EAA000C36D034890CE448FC86D86E05E09E9CD02
-:10EAB000F9A577D5A4604022BA07A8FF6D9C7F7A9C
-:10EAC000EB18D9F7BDB7B9886FCC2C68467846E308
-:10EAD000838C0E467CC414EFD43A6B0C0F3F13EBBF
-:10EAE0003AB93CFCFCBFA11DB9D94C7624EA4CDCF8
-:10EAF00077B19E4C8217E8F902F187BA5F7A242B2E
-:10EB0000B889F6679E0AA4C746AB7709C1FFED64D2
-:10EB100037C2BFCBCCBA4C65B8FD609D24EF043C36
-:10EB2000ACE73186F6D99DC23EFBF7FA4B56B403EB
-:10EB30005EB573FB0A19C504F26F29E3F54BD725BF
-:10EB40007F88FB99A5EBE49011F62BAC6B8E371CFC
-:10EB5000B7CF208E82F1FC425EB2ED112BF28D1FF9
-:10EB6000FBA5E0F87FB4BA2D5886FE5391ECD0BFD8
-:10EB700038D6FF3DB16E17CB1C7ED696EC46FC26F0
-:10EB8000CAF5F754F87A1EF3C67F4FFD4EE2B8B0CF
-:10EB90008F7B1FF105780FA5A23DFF6D99E89A08BC
-:10EBA000AFD31079C80CF58BDB64FB7AC0A7BFD557
-:10EBB0004AF355E1BD3333722DEDAF12C63F93DCFE
-:10EBC00054A1E0FCC5FE83ADD3EEBF1833C4CAC068
-:10EBD00017CB5984F631C3DE8B7D6BE2BE8FB1BF9C
-:10EBE00018E3DBA9EB85B9A504F8055FB92505E9AC
-:10EBF000E69738DDA2F44E805BC5A7EC18199F4E4E
-:10EC0000433817E595BFD5487848ECAFEABDC7CC87
-:10EC1000B03E80AFB64B12F1E3F6FB92498F311351
-:10EC2000A763F3EA2437F2E74E43E4695A372F1912
-:10EC300019D2F5A239F202C9A342EE37B8F83379F6
-:10EC40000FB6BB90CEF9FAC2613DAD270E0CD83B92
-:10EC50003F93F752BDC4C7BDD09EECC6F5D88C9883
-:10EC600084EF3707FEAB8D01FE4EE9F83EB87940E0
-:10EC7000BBDFBD00FFEACB6272E122E3DF090C706B
-:10EC80003900335D45DFB923896D82719B7492171A
-:10EC9000EDA3A6D593821D9C5F4CB85E1A04484D27
-:10ECA0003AD8F795C5D67793EE6411EE9B1A4C9B34
-:10ECB00087E414AA3F8EFB2D86FB25E8B71A3B1587
-:10ECC0000CE7E7A6CDBFFD33C2DD74484BF78618CD
-:10ECD0007F489F49D83F8E5F0A627C40F635CA87DD
-:10ECE0006A161C2F713F0C96936B8682E887691613
-:10ECF000FE89F463E1B9C81FD6F27EB6149ECD67D3
-:10ED0000B97D317370CF2BB8CFB5D70CE5E2349B0A
-:10ED10005BD75E7DFAEA187D5538670C6E9571FFFA
-:10ED2000A6DA2571FBC7890BA6C43FD7533FDC8FFA
-:10ED3000E2F7C2F80AD785C2F5D936A1CF40EF91E4
-:10ED4000DC5DDE3381F41EEA25945FEA7E16E51968
-:10ED5000CA8F271D558B1C30CF92B4AAAF38A6F1AD
-:10ED6000EF901D8F9BA019C3F199A857D476B8AF27
-:10ED70006DB18CDE2EEAE7D991CAE583225179C5BF
-:10ED80004FF57B36117C0AF1CBDADD05246F557F18
-:10ED90004C83F043AD10FE9B15C27FB372BB91B99B
-:10EDA000E3FD55416DB941ACF74616E67EACFD502A
-:10EDB0001FEFB7A966212BD6A3FF069FFDDAFECD74
-:10EDC0002C385B41FA0E7C668C7FCF7AF97CEF148D
-:10EDD00074DF61E67E9B99EBF6C8DC19C5E79B5AA8
-:10EDE000E62D7810F5C49B7AF22FFC87A0938A1742
-:10EDF000A3A3EAEB88EF24DC8F61BB078D8497D354
-:10EE0000A08F0F0ABFC602DC67B6F9B30A0B113D2B
-:10EE1000B6BC05D6E1F8DDF492B91EF965B343A797
-:10EE2000E1A72A879ECAE4EF41BCB727935D0D682E
-:10EE30009E8A7C543156D5936C2AFA993ED483BD70
-:10EE400005E5A65B2D7E1C2F8C7601947708F9B51D
-:10EE5000C361A0F1D472741F27F805BE43E3A1DF9C
-:10EE6000C517C707C168FBADC25EE47261DBAA24A7
-:10EE7000924731BED531E2DB129F01FD452F0939A2
-:10EE8000F2122094F651FD662E47142E9F5E3A3BF7
-:10EE900089E4DE1B1FAF26B972695112334AD4DEF2
-:10EEA0002B61FDF3C6E07A28DF25FCA82F49DC0E94
-:10EEB0000C1CB1D2380D06FF0EF42B343C37DE03A8
-:10EEC00014632F1882DF7F1AEB5F3693DFAA218548
-:10EED000C3D9F0D21892933FD6079FF901F9218C3C
-:10EEE000649F3524B953A9FE27690CEBBB92FD83BF
-:10EEF00048CF6C23B71B1B0CA1223BE0F16490DBD5
-:10EF0000BF2751D0E0F88356B26B00CC2CFCFEA991
-:10EF1000EE4CCF26770C2FA71E9A4CFCBF4DCFE9A5
-:10EF20001638CCFD9A27F5BEB959503EF97CA90791
-:10EF3000768EECA2CF1032008CCD5BB8BDB64CE71C
-:10EF4000EE6B45D9F472B247B3DF7C78652DD637C6
-:10EF5000AF5E7713CAC1D1D633CAF3787FED0516F9
-:10EF6000C9A3FD66FDD8FE107CF7C2E0440FA94797
-:10EF7000E60262039FD878DBD37AC037F2D7113D1F
-:10EF8000F1EF171D1FE78BFB3FD42FF89D6690BF55
-:10EF9000513F32C9DFB8B23C5299D3B3F9A54C61A5
-:10EFA0009F69EBEF48F55F40B9D6F4DDDF9F682538
-:10EFB000FC4648FEB11EEE1F3FADF72E463EB5574C
-:10EFC000870C4BE3F6B78634BE8E9619855E6721B3
-:10EFD00043FCBA53EB2BAAB47CAE3EF5697C1F69A7
-:10EFE0001DE2727C78BD4EAC9BAF18516F71D70D8E
-:10EFF000ECA7CF727F8621CD4DF533CF860CCBA009
-:10F000009CBF2E6458219EB82E00DF2113CCFBF448
-:10F010000E2B5FCF80061C67C57446F6C80A19EC34
-:10F02000D0327CEF1E08035DCE3C6FE7FCF527C0B5
-:10F030000AE07B0913ED8C60B782DC7AB1530AA138
-:10F040005DBF64BB71AFB900D7B157B6223D774BF6
-:10F0500024B796745616ED80F2EA435388FE29D3FE
-:10F06000395FAE0EDA49FFCD147270993168203BDA
-:10F07000FA19EEA783F1C91E6E804E5965C3F1805F
-:10F08000F25BC30F416D9C6166BF90A7FBE3E20B8F
-:10F0900063E3E47A7F427FB0E3B4FC1150F50E974E
-:10F0A00073CC9D89724E95C34687AF348DE452610F
-:10F0B00026D217E8C9E5E44189F0DAC85AB8DE106B
-:10F0C000F23EFA5DA12FCEC801AE978C5BE93937CD
-:10F0D000AD80E8B61AF50DF9CDF9FE6E343E989B79
-:10F0E000A6137271643EB85EF041C35916BA16BEDB
-:10F0F000D7B08E851AA7F2A7752AE941AE0F4D2227
-:10F100009E61E2F18ECFD38B897A7098DE4BD077F7
-:10F110009906A1DF049DE3FDD9A8EF67AE0BCAE80D
-:10F12000D7CCB379AFCD4C8FD92FCDEF994CEEAB77
-:10F13000B0EC63632DE89FA97CC685FE5DD88FE3A4
-:10F14000BA4A06BCEC81F7BB55FBD6C5E7EB32707B
-:10F15000FED52B3E566A41BA0CD17E3592CE6CC894
-:10F160008F2A3E775BA15F19F6E3EB2DDADFC43A15
-:10F1700093E2FA57BD6426B97AE5B0356824BBC37B
-:10F180009F6F87F1327E65243BF4C24B56D29F17A6
-:10F1900084FE73AAFB7EB681E8D38A744D476EAABB
-:10F1A0001A83FE5326CD1F832250B5C31AEDA3F94F
-:10F1B000B3457DC1D0AD9CAF8CB45FBC620F7F13F3
-:10F1C000CB000F43FBBA05E98CFEF643B34B1F801F
-:10F1D000F7CD3E8B8763DF5F8AFC6A94EFBD15FD38
-:10F1E0002A73E57591FB601E8DB9169B11BA54E721
-:10F1F000FFFA97B741F9A3437A66443AEF9BBD887B
-:10F200008D1D5DFEAE0AEA4F86E3D6CB9AFDDA721B
-:10F2100063BFB6DCCC9493E13879FC589AD5796613
-:10F2200032C90ECF67C0DF4663CBD93D00AFF1C70F
-:10F2300046D2470D69FE5D69E837D5455E433C1B04
-:10F24000F3CF4D453F4555FE9F28AE73E5DBCC839C
-:10F25000705F315792FEBEB2C3EC0EC4C9AF66C137
-:10F26000FFBD79B554DFBBD3E896787DEDB40AB421
-:10F2700007E9DBF867D201FE9BB7CFFB88F64D6844
-:10F28000B543B917ED4BECF79C146C47FB713BD7BA
-:10F290007BE7C17E34A1FE14EBA9591E9C6B82FF53
-:10F2A000EC75D44C44F9A2FC59F121FD37E25071C0
-:10F2B000F6EEE1E8FAE47E9C1BD08F338EFC3887B3
-:10F2C000516E349AC2864A18E7BA3FFF8EE4F2CAFA
-:10F2D000D6A564D7C7EC5C23C99195F7F9E9FD2B56
-:10F2E0003BAEA7799D8179237ECEECE6FBB99539BB
-:10F2F0009620C2779D9DDBBF2BA19F240DC74B227B
-:10F300001E7EB3EB7A17D2FB378C7F2FD0CFED84E4
-:10F31000DFD8865248FEB85B52D0CE6BDE7EFD470A
-:10F3200028B756EE963DA8C7D9112BF93D56EE9E4B
-:10F330003371B905C7B99C568978EB9B6393E9BDD6
-:10F34000EC0B72FFC9D075F05EE9BBC68DEBE4F83B
-:10F350006E2387CF6E7A1AE1BFEECF32F1BDA26382
-:10F360007EB4577B0DDE89B8DEDCBBF6CD45BCFE36
-:10F37000A62E5B47ED9F95980DF1606FCDC0F72BE2
-:10F3800025C587EBAB7EFBAADA787BA4334D267CC0
-:10F3900057E6AFCB085B88DF6F453DD7B85B4F764C
-:10F3A000DDF1051FFCF236678CDF57CA3DB7CE8C06
-:10F3B000B3379A77DD28F8013436E069A5C0933178
-:10F3C0007F5D117EF7F3F87FE5FA96221E8FF9EB49
-:10F3D000EB20BABE77F1F5F007D0F7B45FCF7168D4
-:10F3E000ECFBD1F641AABFD9E461DE7D168A1B7A17
-:10F3F000719F9BE754A83ECFC9ED6CE50F6BF7BF3B
-:10F400000DF0F7A7F98D4E789FCFBCA5485777C46C
-:10F410005605E6244E89EC1FB6CBC8ED4985FBDDC9
-:10F42000B6A5B3A737C5C1998DE3A5D3FAB43961A1
-:10F43000DC0BEFFFE935C45F53DEB9A93C9EF63B18
-:10F440008A4F590679DCD2E2F131E48BE6C13A7693
-:10F4500057494C1E367BB8BC4E9CD77227DF6734A9
-:10F460003B23344E753A5F67AABF77676B12F9F595
-:10F47000763A8366BEBF0D3094E73795CB3CDE22EB
-:10F48000EC129FF09399BCAF308CC7308FEC190F02
-:10F49000E521EFA9CE3428BF5D3EC72343D9E27DE5
-:10F4A000B26B2CCEDBA317F5E3C85FF8D6AC4AB23B
-:10F4B0004F6EF2CAF45D569F42FBF521EFCF9D7768
-:10F4C000C1776F66DEB4D3F08D1A50D648C721FCE1
-:10F4D00036DA018ABFDC19E75FBDD1332FED74BC8A
-:10F4E000BEF472FD8FFBF17E113718090F25699567
-:10F4F0003311BFD77D99D3E1E367F9FEE36333F7B7
-:10F5000063ABED3EB6723D53EB94841DD89F87727A
-:10F510003E5AFE5AB1260EEC34F4E7E13AFBADA4B4
-:10F520001D6775978EE2B3ABBA18C5633FFEFE8BBD
-:10F5300079286F3FDAF762DED238F812FBA9CF5B89
-:10F540009D5ABF94EA87748AB8F4528F91FBFB46A8
-:10F55000F143AAEDD976BE1FBB08D21DF94EED7757
-:10F56000B13EC98B76E545662279B67450F835BD53
-:10F57000DE4227EE1FD4FE09E36F41FE01B8A4016D
-:10F5800089F6E7C9251192AFAB4CBED7C6B8312F6B
-:10F59000C54BF499877494905FBD069CB722F679A9
-:10F5A00046C5D788F45CDEA3A56396D326E2944EC5
-:10F5B000A2BBA1C9A2A07EC8E810F2FA1B3ADABF2A
-:10F5C00018B25D16944BD715257562DCDD9994321F
-:10F5D00015FDE6B9D9C5D43E50C5F93A90C1C86FFA
-:10F5E00095C55A2492B736EEE7CE99CE6C98E7F1DE
-:10F5F000A293DB832EE6D92E933DD82F91BF5FCC0B
-:10F600005F95EBC82F28E73E964CC42FD2A044F656
-:10F610009DACEB5F8CE38EC63FBD09FCD3FB0FE6D0
-:10F620009F3EF57BC3F8C74F71BAA52ED3C8FC2304
-:10F63000FCAA5FB8FD6871C26F98543FB384F3AD04
-:10F6400015E3D59A2C21792AC98773F1FED45D6020
-:10F6500067E27E448D2B8EE958E2E676FA5018F781
-:10F66000E5C9D79848CF7D47375480F67C629C1116
-:10F67000286B47798F3286FC8AAD55BED36971FA03
-:10F68000FE08DF3734DDE7A5F7B307B97E6F2E3408
-:10F6900090DDD93C200590CE4D3E43D0544071952D
-:10F6A00025A4B71F32BB799CC4DD4E71926FBB7924
-:10F6B0001C25EA470DF73D80FC566F21BF4362BC15
-:10F6C000E585BFC8FCFBE3197DBFB794C7777AE730
-:10F6D000B9C9AF911847635DDAF5ABC6512E5A012F
-:10F6E00031F0BDA59BCD44876C99E399A59AB87E6E
-:10F6F000192E07C85F9B315D1046C43BA2EB1A244C
-:10F700000396B345BD1A9FB196F80AD0C2BD3DED30
-:10F71000B93793D2FF967C86D6EFFCD57C8680B134
-:10F7200016F3194C683D8B7A041BF4AD5AF69ADD3A
-:10F7300018BF89D52B60379A0624F1BDE76F98531F
-:10F74000087890D4EFAFDFE4B550BC58F3BD78F83B
-:10F750009484F1F530BEC52DDA070ECC9BA3505C26
-:10F7600052D47FD68DF91B5BF4DAF108A5A23F16BF
-:10F77000D4EF1DCF9CFB9DCD3931BD0F7680297D07
-:10F780005A4CFF6FFCA0B6E72AF856B2EDB201F56D
-:10F79000AAAAC79B9D3CBF2171BD3AD2F97A05FB4D
-:10F7A000D5914E7283DBB5B5223E09F6EC5C5C5A0E
-:10F7B000CDEB7C0CE393602F64A4631EC3FBE7CE08
-:10F7C0001C45FA2DF898ECF9E64F15EE7701BB03CE
-:10F7D000ED7393E07336A0277DABF2C16A217F7A87
-:10F7E000EDA0EF915F8F48D302C4172D79B7000DBC
-:10F7F000EE4FF7BA697CB1EF4A8477463AF7933413
-:10F800001757ED28C2F19F9218EAFB4DC52733D058
-:10F810002E691EFC3063795CBF55038F121E56EDB6
-:10F82000D78F38FF19E9DCBE6C3AFC3CF9073F0E74
-:10F830004AB496EB9560F74C28D7D7EBD04263E5F6
-:10F84000C125B791BF7F91818D87F9E50B7DD4BC30
-:10F85000FF2B8199B83F837F12BCDAE95B417A6F55
-:10F86000E7229305E30ECDC54BEF263CD892BC882A
-:10F87000874DC55559F89DA6BAB9368A13807D853E
-:10F88000F54DF7DD4E7E1315AE4D03FA1AB4BB2AC3
-:10F89000C0CEFA11C09DEB985FE381F537463E5824
-:10F8A0007A8F05E3C223CBDF7FC9E0F4EC947C813F
-:10F8B0009BCBC94FC8E2FD7EF903DC9EAB4B37689A
-:10F8C000FCC275E9DCCE9C15189A8DBCF7B2124EBD
-:10F8D00046BBB799793FC1FD25F359DCFB884E5CE7
-:10F8E0008E38DBDCE43F3239C3DFB90AEB6729B479
-:10F8F0007F604AF811FCEE856EA7671313FC8BE559
-:10F90000FB4A822847FF39DDBF18F9AC42D88F1770
-:10F910000E5F5F8A7E36D53EEADE630E621CB0DB88
-:10F92000EAFE6E0DCAC13F283CEE6D8A0CCD467AC8
-:10F93000FCD141E3769B83DD48FFC0563DD51FB621
-:10F94000FA5721DF9CADAB29A2BC1B4BA008E3BC3E
-:10F950007A670F433B01B60BE44F30397D0CE3A1CE
-:10F96000B3034B1409E57C82DD315BE48F92F084B4
-:10F97000F755428C8D072E3863A225D0F9595ACC01
-:10F980000E79E34F0B157CA9DA273A138F67552FB1
-:10F990004A6232F2FD86C86B3AF45F3B87C87E6DDF
-:10F9A000EC97E83B8DC5CF513ED81A917714CDFF27
-:10F9B00051C2940FB53E3D59E8F14ECEEF6C88F63A
-:10F9C000CBEC00A7276361CA938AED23DAA99D3A9D
-:10F9D0009E41F8DD1B85DF053418D53F94AEDA076C
-:10F9E000EBC553CDEBE2DFDD260D7965C46BA9A431
-:10F9F000F117ABCFA7D2B97D987A2C3217D76FE425
-:10FA0000B09AA7C9F330774C9BE441D369589EE67E
-:10FA1000C02773916FC0D0A6F5DA34F0C5F234BFB9
-:10FA20002FF60DFFEB799A1EC9BB179E3F4AB7739D
-:10FA3000BF959AA7E9E1F853E36C89F99917B242A7
-:10FA40000ACFB70AF7ED43FE1C30521E57EDC0EB4C
-:10FA5000EFA17EAC35B17E8C4326DA196DB6AF0CC2
-:10FA600022DF5F3C7FA6EF418679BA2F78285F239B
-:10FA7000C17E48DC27ECC52659A3DB7BEF46E9C9EC
-:10FA8000EDBD68F97FDDDEE3F67C601FCF0F50E54A
-:10FA900079B3D89F5DACBF94827AE644149E843CCF
-:10FAA00086A7441EC3E0C8790C8AC807027B3D4084
-:10FAB0007C7290C775DE783A99E4C7259BB217ED42
-:10FAC000A5F3D6C83711598AB0933A8F18DD282F7D
-:10FAD00040DE91FC0E1CD4F3380DC66D308EF3F26F
-:10FAE0004411C711F1A29792C96E694871A7627F4C
-:10FAF000354EF363A16F1A92787CA62BD97F397D9E
-:10FB000084B8CD1E617FED81A16C38DE7B4611C7C4
-:10FB1000060181FB9D877279DC41C46D2E8AB8CDC8
-:10FB2000A9625DC8C0FD10E4A77277292C0BEADD3D
-:10FB3000EF99836EEECF32E940EF2F53E3362F7308
-:10FB40003FD532119F39B5602EE5072DC7FC7719D7
-:10FB5000FD18DCCF1CCDC767361DCE670D888B9D89
-:10FB600028620280F56BE0B5A493D09E707742992D
-:10FB70008C656F4F0D7C7769A78EF623CBBAB4FEE8
-:10FB8000F22B9BEEAE41FDBDB193C71F035D12E9A1
-:10FB9000EF65CCEB427B43E587828C34A273A053A4
-:10FBA000E7C5EFCCC8E0FE04407D90E6279E9D7A35
-:10FBB000E1671770B4335D089F3A893F37DA949A4A
-:10FBC00011F5B218AF53DF62AA443B3657477EDEC9
-:10FBD0002B06EF22F2933A8A886E9DD696AE1A5E75
-:10FBE0004F6BE58A39E2A3FA6B156EE831B703E58E
-:10FBF00064668688DF24CC77798FB69C187F581589
-:10FC0000D4969731FF842C3C87B05FFB3E3383CB87
-:10FC1000A92B9B0A849FDF437EFE4EBDFBDD029431
-:10FC200053DD0AC9C9F61C8E2F5D2E7F8EB5572F66
-:10FC300022FBC00E7605C1CBE11F7BAD53427DD9BF
-:10FC400069E77CF93F853B11DECA8C226E27A071E3
-:10FC500087EBA85B0A727C71B8BFA8BF626986F0A7
-:10FC60001708F9132DFFEFEF37393F76CB62BDD977
-:10FC700048FE2C15F1C65392E7E910BEB7805D002F
-:10FC8000702FEB96CBD03E99FD150BCDA3E9657394
-:10FC9000D008F58DEBC279B88E9AAAC2452D23E023
-:10FCA00015A15554B905ED963A617F80EBB64B1B13
-:10FCB000871A1E57F47E2B231DF721A70EBE8EF444
-:10FCC0003E6826BD04FF75D488FE8EC305642F4DA3
-:10FCD0004DF5B765A03E4F0AF57DAF00ED136E1FE1
-:10FCE000350E1AF7A0FDB7B4537B6E866DD6C6B934
-:10FCF000589783FC19AC57FB1ECFA768FA0D8B7B76
-:10FD0000713DBFCDE09F8876DD755FE6F1F5F3AB21
-:10FD1000740CE9BB4CF6AC403972DEACB5BBCF5BC2
-:10FD200039BDFAA274F614219DFB46A5B3A708E9D4
-:10FD3000BC4CC7FCF1E334229DAFC6EC734EE7F335
-:10FD4000CF5F5384743E77F09A22A4F3367D8F17E9
-:10FD5000D7CD930EFF5EC4CFE9393EB29BD4BCC968
-:10FD60002FCA8F8732B4FA305AFE3BF93F46D3830D
-:10FD7000A1281C5A3DE834B873501E2E3519FFAA2D
-:10FD80003EC4BF11FD692623F9235EFED3E58751EA
-:10FD9000BF050665B23FD4F15E56FCE3D05FF0F2DA
-:10FDA0007B2E4F401A7DFC066157B94C2C807E0F8C
-:10FDB000D5DE57EDC64479FC0B319FD319DE1AB45A
-:10FDC000B355FF6CBD18D314BCCCEDD3A724F2BF40
-:10FDD0009ADCFD3C7FFEC8121BFA67CF06B93FB61E
-:10FDE000E9F952F2D7AE0ABE12C2FC273628D97002
-:10FDF000DFB0EAA90F53309E0DFBD0531971F19576
-:10FE000039621F7A36782A05E3DEF0FD6AFC7EB29D
-:10FE1000336240FE6D82FD1934614D4A84CE0D354A
-:10FE20003919E9FBF201ED7E4D8D4FEEF41948DEF4
-:10FE3000ED1C9482B83FCB30F80B72503FB11CDB05
-:10FE400099E4D87AF924C36BCB9C161F17F65ECEC3
-:10FE500088CB570AEF48253E0CEB9997EC801D564E
-:10FE6000219778BCE63F77D9833C7F89B7FFCF6085
-:10FE70000195557DBD429CC35B21CEE1A1FC0E25C1
-:10FE8000C8EFF87234DEAC9E3703791E1A29FE1DC6
-:10FE900097B714DFBF8945447EDE6746CDB8D17C75
-:10FEA0009D965237C0BDE66B163A67D80C7CDD5A7A
-:10FEB00016E3C3063115950F9B845FB7B9FE24ED99
-:10FEC000039AF17C05DA551ECE870DB03FC2FCCDFA
-:10FED000C475CBFAB5F98CA3ADE329995ABD122D9F
-:10FEE000FF83FC98D333B5EB579DBFEA078FCE73E2
-:10FEF00050E2EB2B615E89FBCA44FFB5BA2FFCA22E
-:10FF000072EDE64CAD5C8B96FFC172ED8ECCD1E408
-:10FF10009A363EF037CBB5C4384121F77F639C0059
-:10FF2000E3B6FFD338C147EE9E0C1DCFC3D7C44FF5
-:10FF3000BBA4969B4CE330AEC8E3CB8D5623C56182
-:10FF400013E3AACDEEB9228E38F4CB19A8370FE906
-:10FF500019EAF37ACB4A8A5736CB070C78A4705843
-:10FF60003C51394A76FBDF1A575F9F198DAB1760FA
-:10FF70005CFD15CBE5347F1C3DAB4AC0C02F193D5D
-:10FF8000DF68B3A053B2C88B302901668FEB3F5AAC
-:10FF9000BFDE4C6E27BF22F2635C069EC7BEC50A59
-:10FFA000FB3098BF4BC7F377EE4FF76D43F968729C
-:10FFB00073FC3E71F8AB0CCF1D3DA1EF27391268E1
-:10FFC000B478501EAA7E17757C45F80FBE28DFFF57
-:10FFD0002081EF7FF077E6FB447C0CA872E76F8D01
-:10FFE000876D07DC68D607A3B8D75B18CF2918CE72
-:10FFF000C7A38D331A3FFF34D3F75A26C947EF54AE
-:020000022000DC
-:10000000CACBFD82F226B93C720AFD3BEC90D18D41
-:10001000FB0D933897C13667893C4A4F451DE51360
-:10002000F3730DEAF98FD1ECC20FA3729ADB851F2F
-:100030008E2AA7FF7B76E1030EDF299CE7E94A6F52
-:1000400011EACD8D56801FF77BDF378E78CE423D8B
-:100050000F00FCC4CF9B3CCBE3E0897CF58704FD1B
-:10006000F287BFB37E194D9EEA5D2A1C7F67795ADD
-:10007000FFC714F47B8E3E4E80E0A8A81AF28AB81F
-:1000800015C3B8913A8FE6219E7F9621F2AAD4F744
-:10009000116117DEE9F266BAA0FFB9F74D26960A9C
-:1000A0002610F218DA633E0BC5039AFA799E48D3FC
-:1000B0003A46715FF51C65D3401D43BBAF3FCD5F32
-:1000C0008079601B3FB004E454F4932F6068EF5DC7
-:1000D000789F971BD2FCE3294F6C5D581377A8F8E3
-:1000E000ECF206F46700BCE41F708AFC4C15BE3AC3
-:1000F000179767EAF32681EFE8BC9C1C4ED62F07C2
-:10010000D14E4C760F911FA9E91037DE2A642FF9E2
-:10011000EBD91A079D9F683A54594AE7CDFBCDA504
-:1001200068E756FCAAD686FE8973D73A29CF204FB6
-:100130000EAF423BEB9FD3FDB3105E6B79701EDABE
-:10014000A9F960A7A2DD7BEEE0BC527F9CBF7B1BC0
-:10015000FABB61DC6D56AD3F9B99789E78FD5E9E43
-:10016000077CD8EA9F8BF8DD66E6F006B68ABC67A6
-:10017000E1E74E5CFFEABA8F9E73BCC344716955D8
-:100180002E6CD3333FEA3D559E94883C39C007CF4F
-:10019000D31BACE3F91EA26C716AF3154F67CC292F
-:1001A00041784AD0D13B0DEF518848E8775F2EE285
-:1001B000F0D78B7C0A357FCAA8F8BE8EEDD9BA9AE3
-:1001C00058FC7D2CF617F177912793FC29B79FC730
-:1001D000DA0CC43756585FE41F01BE41FACC8A0CD2
-:1001E000CDC6F34485BDA15988CF973FD5113E9424
-:1001F000BAB7287E928A648371C66D0E774F403FEE
-:100200008AED17D7225DDC3DB62A445D7F9AAF9117
-:10021000E0505A8A715F59F5AF7A9E07782499FCAD
-:1002200003BD790D940778E103E388E746D467803E
-:10023000ADA7BCBFB1033F273FBEF59034623E6718
-:1002400097CBC2CF0D078628BF8CCD72123E942368
-:10025000BFA2B8AFD2AD9007A353EFD5E139A84004
-:100260003B23FFE5F85E9B0EE9922FF24B2EBEFC7E
-:100270005F53FDB44F51FDF6419E0FA40F6FC07D3B
-:1002800097D21EFE32AC60D678C8AE6B2AC1F1227E
-:100290004D3CAF3D99219FE40F8C5BFF2528E7770C
-:1002A000D99884F2E7A535F9E42F85798E1F619EF0
-:1002B00077BB78FE8E722459877A4BD9CA28FF50B3
-:1002C000B1675411DC8F4219C65923F8468D470295
-:1002D000B82ED44777BAFCBB11CFD17332AD49FCED
-:1002E0009C8C3877696DFDE0593C7FD267E0E70C64
-:1002F0008FBD3C7901F9EDBA1509E970C5BE24DF5F
-:1003000006EFF78B756B558698CD128FFF63946F50
-:1003100039F608CF4B53F49C4F946EE71EF40B7ED6
-:100320009AEAA7BCD26B3B4332C5B36CA71FA97135
-:10033000C7ED6BB6733DD2B49FEFA713F7319FA7FC
-:100340003F8EBAB47649B4FC0FB24BDE4AD01B7F65
-:10035000F3FE8469F77589F649E23E6E98DD9D30BB
-:10036000DE68768A9AD75115FB0EF1C32B56D50E4F
-:100370000A68F25EAA2CE2DC9B493BFE53224F47FF
-:10038000CD83C9E870B7635E79E4DB8CFC6C6A3EB0
-:100390004EA08AEF1B023A139D8773B11ECAC31980
-:1003A000C3429244F67F98CE7566623E0EF47BDFC0
-:1003B0003596E0DECD3C5D32C943B784709B318F0A
-:1003C00083F236833B56E0776EB1D077CC98C77115
-:1003D0003586E2BD3B507ECEAEE771886CD0B7C8A3
-:1003E000B7D9859C0FCD8B783E879AAFA1E657A8E9
-:1003F00078A812F8CD9EB0A200F707DD92FFFBEAC5
-:1004000079DAF873D2D1F3D1ABC6D27993E8F9B9DE
-:100410004226EABFD839E9447CAAF91D5536BF2DDA
-:100420002B7DF87959953FE2E84670ED3CC2EDF539
-:10043000AA7A03C17F71D57CF2235E5CA563B86E96
-:10044000AA068D9CDF12BEB7337A0F46D04CF75DFB
-:1004500008BA7F9EBD0AF42C463FEDB1B69AAB4F69
-:10046000036E8FB7F9E879D12CF5CB57D179C6C592
-:1004700028992E67EDACC57B0A2E5A237978CFC117
-:10048000E5EC076FA4727AE4049653761EBA11EF76
-:100490003DB8383ED287F71E14EEACE4F5C883D9D8
-:1004A0008C5D9555716380E6CDFD4EB363E7B3CBAC
-:1004B000113F8D2CBC6188FC3B3C7F1FF3FD900EEF
-:1004C0002E8B81EC1997C8B364D522EF12233050DC
-:1004D000EEC82AA578B585B90F0D617D0E3F2704BA
-:1004E000F5C4BF1DE3B95FD824E8CA72543F52383F
-:1004F00080F2A9A3C04EFDA372F49031C8FD59FC4F
-:10050000FBEF3C3F85E24B6AFE2863B6DC8553284F
-:10051000DF445356EF37608A2D17ED850EBDB04B83
-:1005200045392DD55F97156717BD33E75B25B80EA5
-:10053000CEBFF04021CAA5EB0D60B78F20877E9D0E
-:10054000CDE5D045BDA54B023BEDE729FEDB719C17
-:10055000F79217CFB5C3BC16A5551AEC086FE0FB90
-:1005600032CAC574416FFB420E9FBDDA272D8771D9
-:100570003BCCB07EA17FBA5FF1529EBD7FA1740BD0
-:10058000C0DD2171790B9D52695F52EC4EC5FCE5CF
-:1005900006715E5216EB7E46FF5619EDE977DB06D3
-:1005A000662A8531F87E2EE2CB3F2F6077D68DB05C
-:1005B000DF6DCDE2727B81EC9E827CB4411A78AB18
-:1005C000360BDFBBE9FD9C94D672CC3BBE3EB9A591
-:1005D0001CF5CFB0F7A9F0BE24AE6CE4ED1A4C9137
-:1005E0003C3C9FEC4DF6AFCBC2B8D0920F296EF9D0
-:1005F000CDEC774E60DEC13BFA9ED929A85F0AC4D4
-:10060000B97EE1377C6D82EA3734F1F264EE378CE3
-:10061000E6734DE1F964B50BF939C55A91AF30D79E
-:10062000C6CFF5CC2D2FF074008837B18882726F59
-:10063000EE7BBE14DCB7B385FE72DF94D1ED19E614
-:10064000D2BBE3D7EB3C775C19FEDD50AC2DDFE885
-:10065000D1966F9EFEE709F1E53DC9DE1D38EF1F1B
-:100660004B3CFF313083D9689E4E298076C7E41712
-:10067000B3C5F94E9EA7F74F625FF4E27446F519D1
-:10068000FB4D7B31FF5DF533CBA27EB28B99F21D22
-:10069000FCBE00D4571149E4FB392996C25EB8DB91
-:1006A000C6F1076D0D30CE0B4BDCB43E322C3AF662
-:1006B000655C43E526B2432AC69892906F8E09BEC8
-:1006C00053CFEBAA7C58A1301FE62FC0A717E2F347
-:1006D0001DBDED28FA97031F31C6E955A950FEA1AB
-:1006E000F81663ED547E4CF0F7310153E0DB0AADB0
-:1006F000E757AD06A2A7FC13790FEA098CCDA0DF5E
-:10070000F8D2E649049FBA7E6055173A33C8A52D42
-:10071000C655740844B1B02754FE460B08DB8DC1A2
-:10072000FF2C203E27791399C6EF4FF879019727C0
-:1007300091AD0E711E8CC7CB724DD171BD386E5606
-:10074000F43BFCBC51862843554807F3FE4D560147
-:1007500097CB83AFFF81F4B2C5E3C7EF18524C7457
-:100760004E465D37B6CEDFBE553B03E759F40D9AD2
-:10077000E77CAB0DE7590C6CBDC8414F6F1A8DC7B4
-:10078000D78F9CE471E33AF94ACDE1994A1CDF40E6
-:10079000FF46DE3F59DBDF05FD1D71FD53A07FC91C
-:1007A000F0FE4F594D21DD541CA7C21D26791EA213
-:1007B000C9CC17F3923378BFF9221FB43005DAA3FE
-:1007C000BE29D6E66BB0E91E13BFAF439B9F71BD38
-:1007D000B42E0BD7D53C53E36018C67B5DD0ED7AC1
-:1007E0009DFF77783FDDEB8B8B8EE37AAB31051580
-:1007F000DC0FDDC0421B9098172BFD4FD8C7913CF2
-:10080000F80BAE8B26D93FC101E5F3FA9EC2BB0BB4
-:1008100068BD7C96356D38BC2A5FA8F0227F209F8A
-:1008200045F92301EE289D6EEAA744B6DD60F7E0A6
-:1008300053B583186BE1F9C6EEDCD8BC8089E69A23
-:100840005A0AD10E79BD3D4072E37AFB2394D7F466
-:10085000E7317E6736C0B5E8AA4FE85E13E65A3244
-:1008600001ED7B80373D3BFDFF1DBCAABD372CDF72
-:10087000F6238326DF76B475A57EB799F1FB69660A
-:100880000FEEA1FCD9E685160F9E8368C6FCCF72D9
-:100890008A2F911D87E784E99E13C924ECAE2F9A15
-:1008A00097CBD7616FA39BECB7A81C1779E5BDA5C3
-:1008B0001CEEDEBBDDEA3D27DCBE5BC2F83D29EA6B
-:1008C0003D27CB6D54AFE69FF7EEE17EBCDEE72718
-:1008D000D07929B0DFC85E60A93A0E5F81F67E1537
-:1008E000FC933262F9D2DBF4DCDEDCA9F354209E07
-:1008F00077621CE8AFC47FBF9AADF59BA8E544BF03
-:10090000DE930EFFEDC817CB4BBC7912F0CF32034C
-:10091000F7DB017FEDC2B31535ACE529BC3F701E96
-:100920006BF9856E1CF1979FF86BF227FC5EC1187E
-:100930007F2DE1FC1520A1A4F25794AF8A13F3ABED
-:10094000FCABB17DAFBDFF574D68A70E1A892E6A6B
-:100950009E5CE23A8E83E7B49EC3E394658267EDC2
-:1009600048F07C113E8FE7AF4CC6F979347ECF5406
-:1009700058C05A16E3F73DC9FE76843FCAF71BF804
-:100980007E6418DCB285F8E3D6DB649E3F9ECCF52E
-:1009900015C62BB2E0FB75E2FBB776733EBAD56A9B
-:1009A00020BEAB1B6CA47C2256CDE30E1EF81FDFCD
-:1009B000077A09BF8B44BF85CE523DB2ECC25A6D57
-:1009C0007C6291458D7FF8F4B81E6F5DA83F19AF2A
-:1009D000EF17B1CD9F60DEDB228C63A8FDE0BB8FFB
-:1009E0006747E31813308E715CECD32F027F23FF2F
-:1009F000BF9ABE72D7DDC0B7131E2F29437FCE9C8E
-:100A00008C554F6D85F2F7764EA2F2AB1977DCFB71
-:100A10000ED6F71551B91A2F71C1FD4623EF5F5C51
-:100A200071DBFC02F8EE71B31817D715EEFB92FCE0
-:100A3000BD75D0CE35756C19E623560BF970F16E85
-:100A40009E0F7FC355569EE2B9D24D7EA3EA245134
-:100A5000FF753EEE5BA5FF568679A9D563238BE92A
-:100A60003EC6B21F4FC2F271E993C523C54D26178A
-:100A70004BA189809F6A076F5F5BF6FD6CDCC757EF
-:100A800057F1F2644F65F738ACD75D5A3CD2B9D014
-:100A90009F8AF5143DF724D6E98BDE0FE99C93CFAE
-:100AA0002479708ABEE91FF27B892C920DFD8F3E5E
-:100AB0006F81827ED2D95E9EB758656ACFC2FDEF44
-:100AC0004D7E4339E69FDA4CA5C7D1CE489D5E39AD
-:100AD0000DE93BDBC4F4A89780CFFF85F8FC9A4F63
-:100AE000F25290B92C5A3E57F9A84EE5EF6A2D1FE5
-:100AF000C3FAFCD7ECF4CF97AFA3F1317CFFDFB1A1
-:100B0000FFA22F69F54A74BC84F59638FE6872001E
-:100B1000FFE2E55C0C8E7E5A57399815360ED75D8C
-:100B20008FBAEE220887413744E73EF225CF243AB8
-:100B3000F0388AFE57E1CB05D9C6CA86C3857F8ABD
-:100B40006A9771086CB60CFC2EAF877E5EE688C192
-:100B500005DF676350EF6FE0F0EC965AB8DC107673
-:100B6000B1BA3F6E52E73BA09D6F45123FEFEC429A
-:100B7000FF05F673964EFA6B70370BBDB9D0E47B68
-:100B8000C80873B8C5BE8CF8E1AB2CF03CDA27C6B8
-:100B900054BF634C3AEEBB0247C205E4CFA5BC018B
-:100BA000A077DA9838FB44852B111F4DA3C8C344A6
-:100BB000B813F110A3CF10D957EAF9A9E8BC12E68F
-:100BC000D361E5EB3532CDA8DE5F528CEBE26D6987
-:100BD0009227DE9E7E3B416F27C2A5DA11AA5E55A1
-:100BE000E1417F11FF7EA41DCF90DD38662CD99D99
-:100BF0002ADF640AB80C3A69C438EA8D6374AA7FA4
-:100C00004E43C7C4734E2ABED4BCA0443CA9793D10
-:100C1000C3E23509F1C8D1DA49603F8F710CC79F33
-:100C20001AEF7144FD5C029FA512C93F87F073CD96
-:100C3000F6F0F309B5ADFC9C7C6D0D4C0070FFB671
-:100C4000F01FA8787EC8EEBF8DF347781AEED3BFA9
-:100C50003BEF698A73A8F7C825E267F928F8198D70
-:100C6000CF47833F2DD5B712BF7B5E1AAAC0CA2DCE
-:100C7000E9E2FE41E62FC07560B71554A21F02E4F9
-:100C8000EA679FE1660EAB80AEE50E7F33F2F9575F
-:100C9000996F0ED2D751E3D773FF3A23FFED5AB1C4
-:100CA000DF9A23F4EDA55D32C507AABD131F9B850E
-:100CB00076E21B7A16A4F5EE25FDB946C07F099FA2
-:100CC000D8DEC2F5EECA377F54012B864DD8AE8BE5
-:100CD000DDAF00FF26069334F72B4CDEEFD094A750
-:100CE000F4676BDA5F353056535F1A9AA4A9BFFADE
-:100CF0008D324D79DAD04C4DFB6BDEABD2946784EC
-:100D0000E76BDA7FE9EC024DF9DAC8ED9AF6A7C491
-:100D1000BE9805BC43C51978BF389FEF759F2ED587
-:100D2000F4FB6DCADC37900FEFDACCF3972B01336D
-:100D30009A7B267AB85DD102FFE374F52988AF1556
-:100D4000606F63DEF2CAED5ABBA37E70EB0694A51A
-:100D5000897915AB594B155E49979857516D5BA230
-:100D600043BEFBA731C2EEB8865D23EE85F9AB74B6
-:100D70002D62E3FF5B7435BAB47435BBB5744D2E88
-:100D8000D6D2D5EAD1D23575BA96AE76AF96AE69DF
-:100D9000355ABAA6FBB474CD5CA4A56B965F4BD74D
-:100DA00031F55ABAE6B668E99ADFAAA55F4160B59F
-:100DB000965E09F456E5E5B8AEB59A7651BAFBEA07
-:100DC000291F667CCFFD9A7155BA07E07F9CEE2DF6
-:100DD00094AFFEB7D29DB120F95F13E97E3681DE74
-:100DE000A0AF3E42B90076C6397C2E9A20EC79DF5E
-:100DF000C876862A7FE2F57AFCBE7534B9344C8F0A
-:100E0000897DECA87A2C611FFB3E66F1907DB49938
-:100E1000FC3CB709FEBC8CAF66A01FF507A49FDFA2
-:100E20000740A6035CEF23DCF09DF79326939FE138
-:100E30000E16D2D3BDBF98890883DE8989C932DEF8
-:100E4000E7E3A6E732A1BF970B3F8437D99F92C350
-:100E5000FD0FF919F8DD9C217EFFF25B695FE89ECA
-:100E60008293E887079D721AFDF0F0BC60E6FC7083
-:100E700046950F5EE676C6E16DE96C89F4323A7C00
-:100E8000703FBBF4AB12C51996FE9E3FC7E770BB1F
-:100E900037F1D9D1AAE28DEF876EC87193FECD618B
-:100EA000FDC27E637ECB381A87FBCD9FE4F78F3E71
-:100EB0002B3165BA838E49111D334D1CAE67F5CCBD
-:100EC00084F87B86F9DD8897EF28209A789EFE24A7
-:100ED000E487A5BF7F672CFAB164D97513DE2F3D77
-:100EE0001DBF0770CCF95A8B847EDD4C578B847EF6
-:100EF000A361EF0FDD2FE1F9C26899F176F88778E9
-:100F000050FD73C53A1EA78EDCCDF7174F7D9D911E
-:100F1000DFA9A3355019C0F8940C0607E6B1E8F92B
-:100F200079E41B72B8DF2D8B0DD1BDA6EC356117AE
-:100F30008AFBE04B44DEFB0511E759B1C7C4304FD3
-:100F4000A2E4E05107C67556002D87509F297EBA4E
-:100F50005FA364C7AB0E7ECFB8DE8EE7D8543D3AB0
-:100F60003ABD1576262E7F1CE8D832921E5F93CBB1
-:100F7000E3B31D6D35B3302EA3C2F3609B7716F239
-:100F800087AC7818C693F0DE9DF8FC338313EAE350
-:100F9000D6AF62A9D194F5161F5D66B1A1AD85F8F3
-:100FA0004C2FEE07DA98B3D616FFBB01AB7374E291
-:100FB0001EF200433B9B8B7A7C2A67503EFC91F1EA
-:100FC0007DA8D105E3C4CBB57BF358BC5FB9ABCDED
-:100FD00047F06E90FC7E1CC458C842E614CC5BC03F
-:100FE000B397F07EC7F56F601E8DC1BAD613728FAE
-:100FF0008E37A34BB9122F971EC801B9941C934B7F
-:10100000DF6D3B4B78EA685B44DF037C318C9F05E6
-:10101000B2B87DDAD1B684DEEBC0CE427E7A65C747
-:1010200084A36EA83F01FFF09E1CA393C3C5CAF31F
-:10103000483F2D167C803EAB5CE09F13AD7AE2B357
-:101040007B722D415C84F7BC3DFE28DEF369005EB7
-:1010500092FF06B8A3DF11783208B904FCE4C3F5A7
-:1010600066C856C8FFEBB02D203AFD77C753F16B29
-:101070003033BA87C6906B21BFCD1785F37B390912
-:101080007ABE3C8FE4E83D022FAFECE0794727EED3
-:101090006564BFDE731FF7BFDDD3C828FF9BB5C2F1
-:1010A0005F458C6F54799D8E3781C0CB9E3610344E
-:1010B000458C3DDC66C293572C19FD64E36274ECE9
-:1010C000F12A7674C76FAD76D6E1F3E1E9A77B50DC
-:1010D000AC6C99F5BB217CA28F1BBF6F6B6141B4D7
-:1010E0003329160BDFB7D74319BE9F22EA53FCBC46
-:1010F0009C2AEA5317F172AEF739A91A014B88837B
-:10110000E45A1CF30A51EEDDC5F8B95B71EE7EB707
-:1011100090BB632C8EBA6AACFF1AA37C7CB5FE71BF
-:10112000519F6539D9350EE5F2426DFF1D020F99C9
-:1011300096933DB3295EA2AD57E31BE9964B6F50E2
-:10114000FF126DFDA3A2BFD572696836D6176ABFBC
-:10115000FF90A84FB67079C87CFCFE54B5FE3BA248
-:10116000DE8CF5F87D8FB6BE5B7CBF430A127DE84E
-:101170008E585C3FE9DC5FDAD7C6AEC5F5D3D3162F
-:10118000A175F470DBA7442709992C3DB6AE6CAD70
-:101190006CC4F3E092906729EEB0D73B82BC53EB6E
-:1011A0001D367EDE5D7619888F8C16212FC43A8C11
-:1011B000CA0BA9C5C3998BFBB13F8F9F61815D416C
-:1011C000FB220FFE909F73EED5317F9CDCCA6E48E8
-:1011D00062FEB8F6AEBB1C9A72C6D7B235ED9D0B57
-:1011E000C76AEA2DE59334F5CC9B4BEB65ADE0ABDC
-:1011F000A492324DBD7A0E9FF5E46AEC677DE14C16
-:101200004DBB4BC56EFAFD9033F3D4DF19F1985006
-:101210002EACB58ECD44BDF34CDB7434B2D9B3B033
-:101220009EF0E8D4013BCF2F3E807159B4D7DBBC90
-:10123000F47E1FD483E5C29E84F5E686F67BDA6CE5
-:10124000547EA2CD45CFDD6D6E7A3EDE564CF53B29
-:10125000DA3C547E0CC6C7E7A3300EBE7FA4AD8631
-:10126000CA5BDB7C54DED2B688CA0FB5F9E9F99DBA
-:10127000B67A7ADFDDD642E58D6DADF47CB02D40D7
-:10128000CF8EB62EAABF46D0FB8038C778A0929FDB
-:101290004B4EA4E3AC5C49732F9835963F302B1727
-:1012A000F307FAC39AFBDD71DE349E99CF3F71BC20
-:1012B0003A1C0FBE3B890DB527F3754C71C7F1037E
-:1012C0009EF5C9C0EF635A381D0A0622549F55CFB8
-:1012D000695127E065CE00CBA9E0C750B1DD0569B3
-:1012E000A82A99C76129BF8CB9609E15E27E1C624D
-:1012F000BBA00EE152A673BDA9D2353A6F3B87134E
-:10130000E73F12BC5F13F397CBFBF9FD17353D2187
-:1013100064FB246F0BDD7F615AE40BE1EF57387DEE
-:101320007E3A8F3FE9D3B9B0B90139F3E997991BF8
-:101330009E390DDA7D4FF65D659AFD85FCE9C3CCDB
-:101340007D358C5BA2DD9F2415AED5F433E5DCAF93
-:10135000A93738D76BEA97AE29D8E0427C8E611462
-:101360009F316E6E6718525CDEBB95E0DA24F07E2A
-:101370004172D379DEC041353ECFEDF3EF09BDC2F6
-:101380004C9B693D4CB0F362516A40877AE1DC8F37
-:1013900052491E3DFD842E88FED7892CA8C3F53FF7
-:1013A00019CC3DAC9F8237E8CA74A58A8CE552E619
-:1013B00096B17C358BD0FE04ECF3F5B9DC3E7FC2F0
-:1013C0008CF1C15CFFF778DE5288F46691A06791DA
-:1013D000BA1FD9AE24FA65BB72890FB5E7993A8571
-:1013E0009DDE6EAFC8C4B8E88551F2CAACAE993381
-:1013F000F177B4AC59D3E9A9BE7FC8AD1BF19CEE1F
-:10140000E3025F2ADF4F0426177CFF38CEE37CF926
-:10141000BB19B8DD6B2A8C10FF5F90BCAE2588D756
-:101420003765CE878359342F45E0553958E95A023C
-:10143000F853DE1EE709B0D8779E6EF3CE54945869
-:10144000B948E445EE6FAB9B591DF7FE75014F316E
-:101450001BAA41FD545CA2F304696497467E990B74
-:101460007BBC78CE5C29631E146F1359CF7AD4D518
-:10147000CA5F64CA73518ECD606ED817582C21860E
-:101480007941AF47E7C934BFAFF43B5B752ADD173D
-:10149000981D957BA813F1F79486907F7ED7ABE7D4
-:1014A000F33AA6AD2FB6F0FC9D15C586A05BC2B081
-:1014B0007A0FDD8BA7F4490C4D7FE52FB3090FECB4
-:1014C0008564E2BFE4ED53E94AED9B14FF0F91BE42
-:1014D000E743EE1774E3042F42BBC6C986BD688F8D
-:1014E0004D40BCE0840A8B09AFCBC57CF7B72D21FA
-:1014F0003CFD5ACCA33337011EE6F1E2BD912B7AB5
-:1015000055FF87769E0F9557DD8CF7EC750CC9C299
-:1015100056D2E273937E682AFE36DDF930C0251379
-:101520009CBF46FACBDB2BE8F7954081D0FC1A9F95
-:1015300080FD7E01C9A31AD2DBD374949F9AC85749
-:10154000A7841C6BC9E5797F56D79767E2EFBCC5C6
-:10155000CAB3883F9FD1B162CA2FD1F1FDA59ABF0E
-:101560000186831BF775A579BAE83D1AF3515FDB55
-:101570007594F727EF49A2F389B25DA13CE34E4B86
-:10158000B56D358E635328AE32579E358476B3D110
-:10159000AEBB1AEDEEE37BEF1FC2FC12395761E8D8
-:1015A0002FEAB429DCEEC8D1513E9662AF36611CF9
-:1015B000A6C872BA12F17974CF37C9BF217F43E44C
-:1015C00088087F925E90AC93B5D0F8811C45DCE72B
-:1015D000E1AD2DCD10210437EE7F6A3E423FCA7146
-:1015E000DB2533DA2B6ECB0AF2A715E615D07CF497
-:1015F000186F83F213EB2ED9516EBDB96783A30028
-:10160000EDE7A0423648F19F3BB2E9DCF91E039DAD
-:101610008B57F19A1F503471BBDC566DD99810BFAF
-:10162000D3279C4BCACA2B107A6E110BC5CD47EF3E
-:10163000E2FB35E6B4D07EA7304F629FE962E53128
-:10164000A2BC5F1FC8F6007E8EED59918FF3BA726F
-:10165000D84F79BEA3D9FB1FE7BAD5DF4332EBE8F9
-:101660007ED59019F37E9F6A63E968DF99820AE567
-:101670005DEF13F2ACD0C2F9DF90CFF93CF159D84D
-:10168000C3D79D722029988C74B3F59705804F2697
-:10169000BF328FB941FF15DABCE43F2C6C35A4632F
-:1016A000FEC0DC1F5A884F2E5992C84FA8B4267925
-:1016B000F07DC7DE8A62771CDCC1365B3AE6E5EC7A
-:1016C0006D33A5A39C0A8E225FC7D97594AFECD663
-:1016D000F17CBAF9791CAEF979FCBE9779A2FCA429
-:1016E000125880703E09F4C43CE9A39BB93DBCB6D6
-:1016F000DD4470AC7D731CD955A3E1EDE936573A52
-:10170000DE0FBF77B32E1BFD4795DD859BF09E84D2
-:10171000B5567E4FAC9C3AE9314C45673FD533B462
-:10172000DF3B52667A96C5C97739755631F2952CEA
-:1017300007B2D12F7267DEFC9B315F12E8B713CB83
-:101740002BFB4A79D91AC8C6FCCAE6BE69BC9C1EE6
-:10175000D889F995DFEA9BC1CBB9816CFC1DA9B68C
-:10176000BE6B79797C60279637F655F232FA9E4047
-:10177000766EE99B7333CAD90E83A71E05F20F005C
-:10178000FE1280BF5F3CB70ABCA8F5CFE17BC0F377
-:1017900021F14CAC7F41F41B18A5FE25513F38CAFE
-:1017A000F82F8B7EA151FA1F13FD8E8FD2FF35D1FA
-:1017B000EF8D51EA7F22EADF1A65FC9F897E43A301
-:1017C000F47F57F4FBC528FD7F29FABD374AFD0792
-:1017D000A2FED709E39F10EDC3E2FD58EBE60F42EE
-:1017E000C07763418EA05C2AB66E76E03ADFDB55A7
-:1017F0004EFCDF51C1E33B2ABF8FC5DF6F827A5DAC
-:101800003EBF4F4A97CFE33CCF88F1810FB720DF2F
-:10181000AD7D5BA63C9B0E9DE76C10E5E8261DD9CF
-:10182000036BDFE4FBF3B5DD4A30FEFCC53309F0A2
-:101830006F10F0750A789FCCE3F139A3CB955E1B4E
-:10184000EF47B269CB9896857217E437E5ED1677C6
-:1018500057751597638C4C471688D2680AE17D0D41
-:101860008A55E8055B794F31C26751E89CBA6257E7
-:1018700042FBB1BFAB9CEC3B15BE4E8B42F775C92A
-:1018800056AE07E6FE70960DEDAC4EE61FF2627F97
-:101890009742F6FBD1AE321BCA3D83F52E1BAEDF5D
-:1018A00076379F5775537112CA6BF9211DC9EFE343
-:1018B00036BEDEFB5C3AF25B805EA1F32C20AF3DCE
-:1018C000A82326B0503B9D8F78F88525DCAFC7ACA8
-:1018D000A515745E448D434B4A9CFD7F59E0275FFC
-:1018E000E81105F50B3C9F2C17E71C02DCFF046494
-:1018F000738D893BAF79394FE6E740D438A25C4B12
-:10190000F716E5AD5334FEF79C7BB5654382DE5098
-:1019100012F4CAB82E9093717AA72060D3944FE640
-:1019200009BF8E8779D07E9DFBC3CD240F2FA17E6A
-:101930009346977B51F92BE4F193E21E9E2703FC1B
-:101940001CF1D1CD653F417AAFEDD6D1BDD35F5407
-:101950008E3E93C7B87FDA0F7A07ED198565E37E6F
-:10196000E9F3F0305EEF73D0BD0A9F838FF18F965D
-:101970003B50DE8EF72BA47786E98DCFC1D7B3928B
-:10198000E73D3FD2D19EC4ED6A1B9F77678693DF08
-:101990004724CE1FCAC25E7B50F8C195D4B96EFCF5
-:1019A00089904E7B0B9537489ECC1BA0FD46C96F96
-:1019B000C3F21B8E24AE777293880FF7A32D43F7E3
-:1019C0001C16F8D03FD21F34A8F71486F0FF0E6221
-:1019D0007E8E7A0FA28BEC33710F63EFCDD5D85E7C
-:1019E000B14D469373DA138F6DD1830D7AD0C0A2B7
-:1019F000EDF13CD533C775E29EC4DD5BD05E3D980A
-:101A0000C434F7401E443F3A8D17DC82F73EC2F7DC
-:101A10006E90610F767DFEF7B658B262F054B90F42
-:101A20006C69A73C59BE2FB1337E4FF779773805E3
-:101A3000970BEC4FAECAC77DF99ED3199ADF5D13A1
-:101A4000ED5345FBA6C148D30137B59F960FEBA0D8
-:101A50007120925242EB2B5211DF3E45ECF7E3DA54
-:101A60007F89C61FA57DB10ACF81776F2DE1ED2B50
-:101A700071FC0BEE7006E5BC24C093367CFCEBFFDA
-:101A80001A3C9344FBF3A177A9FD0516CE9852406A
-:101A9000FD6EC27E17DF7AB742CC3B03ED64908ABD
-:101AA00037E37B34B7F8EFB1B490FDDC6FEAB1A156
-:101AB000BD66D6F7F850EE16E2BD4ED363CF05F9FA
-:101AC00085DCAE4A78DF6F6269B5C88FAD3ADABFA0
-:101AD000F49B86CA4AD09E7ED102320FF5C23A0FDD
-:101AE000CAC181F05A4F09B4EBCB9945FB8A838672
-:101AF000967E3ADFBBC442E74FFB6C3D365C3F66E7
-:101B00007B8F0DE308F27DDC7E52965AFC4F213F1D
-:101B100085D6162F8F5BBF556E3DC1DFFDAA65339D
-:101B2000EE03BAF59E9E0968675B15CA3F57960E8D
-:101B3000CEA7F3823FD03192EF30AF2A287736EA32
-:101B4000E8BEFA87DD4BEF413C30C5E7AB827E79DA
-:101B5000E98A84E72F1E547C268C5F1885DDD6E742
-:101B6000E1BFF7AA7E7787B02F77E4F37BABBA9714
-:101B70001C287E0DFAF5B5AEEDC7EF99279A18E649
-:101B800099F5E59CE9C6F3A28FBB60C70B78B0342A
-:101B9000E8E8F75A1EAF8536A9E8CF3068FC15CFC4
-:101BA0004AFDD43ED0A8A37D82A5C4A0F16FA43580
-:101BB000E8BCE8773CE0F66F427EBBFA6DE506FCD8
-:101BC0009E6BBC6243FDF490EB17261DC09952AE8C
-:101BD0001DD7364B3B8EA35A5BEFACD5D6672CD4C2
-:101BE000D6BBBE6648F0D768CB29C8478847900166
-:101BF00016D04349BC8A2559AED0EF8575FB77F5E1
-:101C00004C8036C6E440E96B006FD2A424DAEF6F53
-:101C10007C3509171FC81F467267E3144679AFC7A2
-:101C200072BFE9427D9A889FBE1C03CDD75208F847
-:101C30002CC0FDFA59FA5D2F0B8B6B5780F8F13EE3
-:101C400093CFF7EFCC5581FE394672F059D57F7CA2
-:101C50000B3F4FD5D7CAFDD20F2DE2798134830ACD
-:101C60005CDFBC7D0AFECED854F4DB77DD8DF98EC7
-:101C70008978CDC4FC3239C61F1BD4F32B787AB2D5
-:101C8000828B655C7797DCFCFECD9705DF1C14F733
-:101C90002D44DB23FE3218DFCAC2786FE6ABFE07A5
-:101CA0007E1E609B1A8F1165BCC610CB078F3B6EE2
-:101CB000C0F5B46DA1A30CD7D3466197A5E618BCB7
-:101CC0001301DE47DE3004A4ABA0ACB0E37AD0E76A
-:101CD000071DFCBB86379302789EEA1157399DCFCA
-:101CE000FA389FFBF39EABF4FCBC96D6A342E7DF29
-:101CF0001E717ACC65DCDEC0BBAE19A51681697198
-:101D0000B4B68CF6A98F783D665CAF8FE478CC983A
-:101D10009F6CCE526CB88E1D2E85EED17AC4E4B77E
-:101D2000A1DDE2000588BF1F67C8ED9947E7920073
-:101D300087BA0A1E1260228F0FF3E8D204BEFA5C43
-:101D400077D9F0FCBAB3F0D0B7D0AF9E86E3A5F058
-:101D50007E8827BBC0D3A57C37CF4B16E3A7DDF524
-:101D60001CB5C7BFCE8AB8F13C9CBF0CF358907E1F
-:101D7000074D7C5F1D273A3EF392DF7EC34F38DE6E
-:101D8000DA73F9FD4186358CF661CF55FAF71F45B8
-:101D9000FC6425D13E3BDB955D85FC91FDC6CE05FF
-:101DA000780E61C34FB8FE342CE7F1A66C8599BE5E
-:101DB0008CF34EF7DB108F89EB30EB784F1D32DB65
-:101DC000FF054658D4C60080000000001F8B0800A5
-:101DD00000000000000BD57D0B7C94C5D5F73C7B43
-:101DE000CB26D9249B0B212124ECE646201736E193
-:101DF0002222EA7209A222DDC81D233E210102240B
-:101E00001040FB46CB6B161214156BA8A86851370F
-:101E10000A142B6AA88058D177B968A95A4DABBE6D
-:101E2000A55A692254416E31B4EF4B5B3FFBCDFFA5
-:101E3000CC4CB2CF9228EDFBF6F7FBBEF86B87795E
-:101E4000E676E69C3367CE9C7366765702BBCDE799
-:101E5000602C61A28DB9EC8CFEFECEFF976A61EB1F
-:101E6000CD098C254DE1DFF342BEA7248DCF2D6235
-:101E70002C79BAB17E0A0BC9BB79BD239D77B058C6
-:101E8000C6065419EB3D197DAC9899900BF96EFE7E
-:101E9000EE7C93D67EDFE0118CF9532D9E6D2EC61D
-:101EA000D2C3C663EC9B08E4356672FD3D8BB1F18D
-:101EB000AE78C6FAE17B9DCB57C8D82E9B738223A0
-:101EC00089B1CE15CCF30C6F3FFE950D73DFE1F9B0
-:101ED000FF4A77382378ADB423CD6D05FC3BDBA7F3
-:101EE0000F46FD2D16FDE9685EBEE5687FE6D71852
-:101EF0008B886675AD1C4F3613D391FE1D7FD7625C
-:101F00001C2B8D33DEC527359231DE45C094F2CFD0
-:101F1000A7AD0307E63B3DE8CFDD66E7FDB65A9C7B
-:101F2000F9169E1FF9F4630F59D3310F0EE3189A77
-:101F3000B6978D66ECF9C37CDC013CE77FF2A189A2
-:101F4000165E1ED55DEE47F92E9349E4FD81872686
-:101F50008E656CE0E1D6350E2763654FEF78C8CE0D
-:101F6000F116F92B51EEE379BF0578A919D4CEE724
-:101F700077306309CDBFF177112C82D72B347B36B4
-:101F800023CF3E8964DB787EC79EB1B35DBC5E63C0
-:101F9000CC28975EC0D8349746F32F43DAEFD27936
-:101FA000996D1EDDE3B8F4FB8D126F8C798EB670DF
-:101FB000FA163E6B63F7F3C23CC00D7AB544069E39
-:101FC000017D9B1FE34CC7589553D0BC6AEFFD19A8
-:101FD0000778FA6A4C59A58BB7AF8A99980C78D2D2
-:101FE0002E32A62772BA35D899CE719596F4338DD4
-:101FF00071F806261D1EC71CE09BB6354EA4755110
-:102000004C0FE1CBB48B16A60F477F5EEA0F7FF62D
-:102010006470A1F86B4AD0D91A0E8F9FE37A1BB86F
-:10202000D319D5A11581F1277ADBD5FAC8049FB25F
-:10203000D9AD05E03A81071BC7A9B584A70E4B307F
-:10204000A297FA77C87A66BB23681EC653E75B4738
-:10205000A95F87E54CBBBDA79E3D60217CB01A16E9
-:10206000C8D1084FFE08E4E31228CFBC5E575232B5
-:10207000F89F1172D32CEC70041F97B897AF9F5440
-:1020800016A4F4498E1E47162AA5C77F1ECDF089D7
-:10209000818F9F616C72285FABD434C844F065D7E0
-:1020A0009BFA9DE0F8C93F14497058D6B340241FED
-:1020B0002C1BF4E074CBDEC0021637EAD9FA9D4837
-:1020C000443B97E403A789D178AD43B1AE36BFE571
-:1020D000D8C0E288BE24773647B16AE04B8DC7D8B6
-:1020E0001AE28780E48B2D0D4EA2A32A1F5873306D
-:1020F0008C8E09063AAA7A691707103D7BFA0D50B3
-:102100007F69F5BB891FD22E66483E717D47FF99D6
-:102110007DF49F42EDFBEE7F208DFF64F0C3F8A9B4
-:102120001C153FEEDC1DEFE369A4B5D9E7E905CF47
-:1021300069B71BE5E4B07D46B9ABF01269F52695A9
-:1021400071FC47DE61F2B4F0FEAE386AAC37D9FDFF
-:10215000513CD6634FFD60D234D4AF15F5AF3A6928
-:10216000ACEF1BB727ACBE80EFDA8BC67AE1F4097F
-:102170008797C3D56F46085C13EC1186F6B32B2EF8
-:1021800081ABDFAC10B8AE4B31D6D7D7F40ED78DBC
-:102190007911DF0A97AAF7BDD197572F7C1ED32656
-:1021A00047F48177517FD6ECCBEBF796EA6FAF77A8
-:1021B0005B7DF8387EB95FF1B5C5D77122FEC19756
-:1021C0004062BDC91BC9F75127EB6458475D725D7A
-:1021D000253027AD67BEF035ACAB0FF0CF54C686C7
-:1021E000B87D5F437E4DB07BCB1FE15527CAFD8A8A
-:1021F0004DE13D5E89CE7D8537175ECA7F8CAD256A
-:10220000B85ED3749DD13E6BF76CE3EB3B3F8DD949
-:1022100053B91EC052029937C73016ED56F29A8B49
-:102220001A0EE75089BB1706B4AE8CA7751E48007E
-:102230003CFFE8B8FDDDDE0477BF9EFAE1F57AEAFF
-:102240000B3CD96CAD2B006767ADC383FDE1431434
-:10225000F176CFCE8C089A39BECE5B1DEB352E675A
-:102260008E46CF7BAB1FC7C307B1BA0BFDCF9E75A0
-:10227000FD3DC86B07135D2B397CE72BDA4701AFB7
-:10228000DE683DDBCDE1A8B1EB8392F914CFA6EB7C
-:1022900083E3805F5F22E195FFA3D0D72BFC029EF2
-:1022A000899AC07F629C5E8871269ADA9EF2E19BD1
-:1022B000A56D14DA31673F82EFAC8DCBBB5ED6BF24
-:1022C000C2C378D9CF01ABE7EB4E3EBF031BE33C63
-:1022D0008D1CDEAAC459F396F3A205265F72D06C5A
-:1022E00080FB2A8C57E3A818940AB8AD126E7B3F86
-:1022F00089776FF6B7C1DD88F1B0AFFDBB16D8E6C0
-:1023000016B444FE157F7CE07E9E8F305DF810F29F
-:10231000A3B3D0E4E17B04DBC2F50B3BDF57DE97D0
-:10232000F87E92AB3FF604FABE1EDF53A244FB9444
-:10233000474D8146DEDE37FE55A2D3B3CB1C1E339C
-:102340001FAB82B96CE0DB4AE6B501FE3F8EFBDBDA
-:10235000EBED7C7E73DCFA74CCE3B64453C68704A1
-:10236000879E5FC6F98D8D15F8FF2E7E606C838980
-:102370008D62EC66A91F2C90789CC6BC568C33836A
-:10238000E9568CFB9B73362FF4D2DF4007E5F0CE85
-:10239000627EFA3E870528BD8505A9FEADAC9DF29B
-:1023A000BF8E2E4AAFE7F0953D363807EB3104EF8C
-:1023B0004B24BFDC9624F8E58BFEC0FBA67E97C5B8
-:1023C000BF659AC0DF10B7BECA4DEBD595E4014C8E
-:1023D000CE09037D3121EB67623FC17F1667CEB71F
-:1023E000AD9FB6AED822368CE4812395E3E13A491D
-:1023F000CAEBBC4BA760BE902058AFDF93EBB5D4BF
-:10240000EC60499C2E6D2E732082C33279DC8A14D5
-:10241000CCF7176BD8AF8673FAFD629C9935524D95
-:102420002FB59B2AFB9B3A70D229E827EFB260D2E6
-:1024300008DEAEF4A27E388EE367AA796713D7B8B8
-:10244000D9E481D6CFDA43E4DAF549BB2C8CEB2F03
-:1024500037641BBF4F29E0F910B93B95597ACA3947
-:10246000FD0F003F903BACD90CFE7DCC1D93047D4D
-:10247000850D6543C5F9805323643E5DF66F6CE7B7
-:1024800079BBB7DDFA53E0A395F1E7E691DE611180
-:10249000F359F69E99F4CACF1A18388F9DE0FAA125
-:1024A0003797B1CFB97E81FCC986144ABFE4FA00E0
-:1024B000D2330D79547EAEC143F9AFDCBE9F804E5E
-:1024C000F3D77F65C1BE746FA4C2B7806395E4BBC8
-:1024D0007BD3473DF6578ED77BDFE50B83C353DDB8
-:1024E000DA3C0960AF4AFF6C2DF4E755CF691ED482
-:1024F0005BBADF6B737078161CD6EF019917BDDBE2
-:102500003E1562A216FA2BD71BEEB3FAF660BC9109
-:102510001F9D48D67905EFFE8EB71279FD2F1A461A
-:10252000135CA71ABC04D7E986C9944665FA5E43D2
-:102530007D2FFBCA86FA37EDECB0A4F1FAA55ECD8B
-:102540008BF5788D9705021C9ECD5621DF3773F9E8
-:102550008EF539AEF0E6276F6790BFFA9B683F2390
-:10256000A1B234917F9F3ABAC2827AB3BEE632CD2D
-:10257000DDC387DFBD0E053E6A255DCEBEA1119E7F
-:10258000CEEECDFFDE55BCBF378E989999C3D57579
-:10259000D14470751D8D0A406955F556EE31933E54
-:1025A000B932DD1600FE56EEC9EF0F7DEA34A71BE7
-:1025B000CBED19EFF40BFFE6D243E4E8E984D6FF54
-:1025C000FA1872EA5321A7B8BEF9F913906303070A
-:1025D0007840F77356AE9703D1AC2E1AFBD8329BD6
-:1025E0005C5F5CCE207F3A4A9C8347BD98361EEBE9
-:1025F00005E3B96C3D7228F7C5C7327FE0EA196F71
-:1026000047EB828F9FE0F9B30193DFCAF799B3AC30
-:10261000F5DCCF2147B73A3C381FDCAB7178B08F7F
-:102620006E1B40F93CCD12554FFC1CA0F59AA7B982
-:102630002CF55CFED4FCECF101E0A7D7380E46F394
-:10264000F2D73646937C7ACDEA39568FFE9E14FD3A
-:10265000FDE487777EB60FE983B5257702C999092E
-:1026600084EFAA1F2D1E8AF67C9F66A9BCBFE75F78
-:10267000D182917C7D166E3AB03695C3376C4B870C
-:1026800069004F8BB76A8D48F3D36F3862E6E5F681
-:102690004C17C1317CA7DB9C86653520F0F1B5B4C1
-:1026A0007F1BF7F5824D5F8DC7F152EDEF43B5D635
-:1026B0002F5B701ECE385AA213FE9AA99F3DFBA72E
-:1026C0007D700BC33CB8E600B82B6C1EDA4F02FEDF
-:1026D00016D0F9AC9EE7B91F6BDAE77F1CF43DAB6F
-:1026E000277BB0BFEC35F963C7A0FE310BCDF39566
-:1026F000ADBF8EB5F27CDC6E2B8BE4E5B5C59D934A
-:1027000050BF36DD45E7F0F4A7AE9B0CFC2CDBBDDB
-:10271000A785FAA9B17B34ACB33D17DE4AC379E88B
-:102720007AE6C901DFED16F907267A3DE0B7EA96A9
-:102730003F8B7C9B8FF23EB3DF6D41FD4AA1E73CAE
-:1027400026F731D65E44F28E58D9D543AF0778319B
-:10275000CA37BBFDA9758E9EFD8FEF5BF999BC3C16
-:10276000D526DB3BA765F8FE817DCB26F721D5DF9B
-:102770006336E68FE4FDA4F3EF1AF6559BD86FB7E6
-:1027800071F9027E51FB2D1FF7AA4CD1DE0B39994E
-:10279000C637D7623E9FB4C72202B4A75FE6F84AA5
-:1027A0004F5A1E25E499D23F662736BEDECEF1FA97
-:1027B000A758FD3ACC6F81DCAF99C59382F91D8F84
-:1027C000F54EC6F835F6CE0CCC81EF8753905F6698
-:1027D000E6FA535688FE64BFBCFD3022CE7B33DA66
-:1027E0005F6EFDB151BDCBDFB15DA349FEBE2EE5ED
-:1027F000EFAA3F9B5831CFAF7A2482E409ED69BD3F
-:10280000E0E575BEDE752E5FFE0376039E5EFDA7D6
-:1028100076339D3F0E9B6ADEE2FB290D9D89FFEB1F
-:102820006C8C1B41792FC87CCD9F4CBD9E0F55CA27
-:10283000E954877979BF36DA1BAEFDDA69A3FE1D4C
-:102840000997355F731FF335C78AF9EEC77C39EDF9
-:10285000567D5542F272FF65CE333DC2BB06F40D84
-:102860009F0787FB5E7C0F87BB9BBF3B2F0FEE3B19
-:1028700034E637619D7D650B609DEDE76062DDEEBE
-:102880005F5C10C07ADE6B13797FAC8DF4CFFD31C5
-:10289000CC0FF9B1BF2C39E077430E32A19FF6631C
-:1028A000A23C52B69F934CED074470FEE779764BFD
-:1028B00094ECBFEE9D4294AF49F37008B87E1B586C
-:1028C0009F49FAAD99EC8647A5BCDE141FBCC5CC68
-:1028D000BF6FFA2A97619CA32C98B61CF5AAA3484F
-:1028E0000E6D8AF7A626703CEEFDC64CFBC2A662B2
-:1028F0009E77909C26FBCEA6326F6A3CCFCF957414
-:10290000D9D412D8F628FA2BCBF3F8F93803CCAC8B
-:102910008EEAB9453F1F5B45BBDF49BAF0754CEB0A
-:10292000FC83CCF941E0599F1A6D815D84633C556D
-:10293000E3F03F5195C3485E4ABBD76C4983B93D2C
-:102940007CE0B58F825E2BFEE62CD81609793CA37D
-:102950003A92EC5247ABD7C6B8F87833747330026A
-:10296000FADFF45283DDE9834C2F8DCB0F16F29CF6
-:1029700010AC041EDFE8B433C8E5BEE859DB3A2EDC
-:10298000F144083F54DB84FC3829F5A15763F4F780
-:10299000C0EFCBF75D9F782244DFAB5A509A4B765D
-:1029A000DFAACB3BDF35824EC368BDFA4DE08FD640
-:1029B00048A2FFE49BED44EF2E87E919D8256F93D9
-:1029C000F2AA110761FEBD714F44602DFFB63C2293
-:1029D0003813F28AD3FFB9EDA0EBEB9144FF1A9BB9
-:1029E000E0A79A9FE7137FEDB579DDEBD0FF1B11D0
-:1029F00044F79A58571C95BF9DC824FF91DE501389
-:102A000015CC8DE7F85C1FAD9F02DE38DF913DB835
-:102A1000C626BE1F937C758CF70138FC7531C48FB8
-:102A20004CE6F51F24D2798AEBA3C4BFFA43F9948C
-:102A3000D76DDED405581F2BA309BE63D29E76AC9A
-:102A4000269EF8BBFCA1A5EF324ECF63BEEDF7E5A5
-:102A5000F27AC7F65B3DD8977E5F6F0EDA385DCFAE
-:102A6000AD3E3E6A33CFB7AFFD24430FB1A395AF60
-:102A7000AD9D8276E54B564FC57ED917BECB6B22F6
-:102A8000B8CCEDA1535296D79CC5F1EFC9D26D5980
-:102A90007C9ECB0BDA1742EE9DB3B53D85F3C1C7E3
-:102AA000717A24BE9F7FF58BED240F2D9DB9D0CF79
-:102AB0009759381F802FE5FEB95CF2E54B597A1C17
-:102AC000EA73FC913E1E5DD026E4DEEACB93F35F11
-:102AD000EEDFB657E3E32C8DDABF8C5273A008FD0E
-:102AE0009CD682B15A16F0C7F538DEDF196730166A
-:102AF00074D0E5B969E90EE3BCF007BBCA52FC83A8
-:102B0000B75BDA6A26BB0ADFDF6D807F292CBD0642
-:102B10007F82902BBC9F67681D3A7E3FEF071CFFAA
-:102B20004B9E1B52027D7269FCBE1F5E45F5783BD1
-:102B3000C5E7E64BF36A3E97C223E67746F2F919FA
-:102B400026E5E06C5BF7391C7AD0B917FA1BF8E67A
-:102B5000DC734328FFA5D6A94571B8CE4979C43C9A
-:102B6000ADA3CA7080F0B68E823EFBA8FCBE34B125
-:102B70007514E48F9247CCDE5A44E7EABCD6229C17
-:102B800027953C63BED65CFA1E68CD45FBBD266129
-:102B9000A7A03FCCFBF9B416C2835DACC725CFE735
-:102BA000135ED438E1F40B9FEFD42CE11FE0F0DE8C
-:102BB000E6E3F5076FB619CA87048CF999B2FEA04F
-:102BC00030BA0C30771E8880BC7F96D17A0D1FF703
-:102BD000D62C614FFFE94FBBE96096E745E652F41A
-:102BE00077097DDB0A7CFFAE1BDFB7A77179BA14CA
-:102BF00073CCEC99FFDE623D0D72FF9C49D8A9F7BA
-:102C0000C6F37C01F41C814F9557780CE7A3B5BF40
-:102C10005B98067FCAFAAC6E3F477FF05B23E425E2
-:102C200097178D56818F2F1BAA879FB0E03C5A972C
-:102C30005A65E999CFC2CDC576AC97455B8AEDF36D
-:102C400043CE3B8D3B861F7171BA9CD96121B34144
-:102C5000A325F043E8D18D3BCCAD7E46E5762FAF82
-:102C60007FC671F03DD45BB825BE047AAF6ABF68F9
-:102C7000F31DA95521F8CEDF61C47F61AB310F7B15
-:102C80007468FE47D00547FEE3ED8A83C6FCF02357
-:102C9000C6FC171FDE3E136CFCCA68C1EF27033168
-:102CA00001F8A9AA3F997404FBDAC9BDAFC4823EFA
-:102CB0004B3FAD7A0BE796459B8D7CC6E9A641AFAD
-:102CC000F76FD7883F1607C2D79D5CEF97ACC73523
-:102CD000CAAE9917CA27E1F43CCD5A677A393FD575
-:102CE000D4AF1C0E7F48F514CEB81C9E2B5B37DA90
-:102CF000E037081FAFAF75CF1C5E17EC5515A34525
-:102D0000D998FAF1EC388CBE1B7E3D09EBADE2019F
-:102D10008DF6FF8A97071F86FCEED835E7064A67CF
-:102D20004E263C28FBD9A2FD5A3086E79DA35DFBC9
-:102D3000DA79BB05018DF687F94D113D7288FFAF39
-:102D40006A43181C9B42CA39FC8BF61DF88BC6FBE4
-:102D5000AFDE626CB798E30B727FC9D6BF47847E43
-:102D600057E7BE31FB5BCC98F70205BFFF1A8679A7
-:102D7000091724171D525F39810C97F71109BE36C8
-:102D8000EC2F633689765C605560BEB50E9B0BF305
-:102D9000ADB5B3603487E3488CCDEBE4DF2F6C8EA8
-:102DA00021FBD4C208AE179650CA224BD0CE43FBAB
-:102DB000F4E7EF9B495FA9C5D8E8E7698DCE3FB539
-:102DC000303622FFACC82F66419A07F8C51B3ABFC0
-:102DD0008031CF9AC5B9A9C6123C007C2C61EDE2C6
-:102DE000DCC3E9E80DF1C7D5F0791E4D803E646C77
-:102DF000BF9CB552FDE5FBFE1E11FA3DC44E4AE7ED
-:102E00003975AE34DB9817FAB1F9EE28DAEFB9204C
-:102E10008E027FAED3BC8FDBCD48C5BCFC1B85FECC
-:102E200033B745EC175C3FCD057E366D1CE2819EC5
-:102E30003297EBD991D023164751BD4DF18CEC2B35
-:102E40009BE6E40A3DFB9B978318A7F3118DEC23C7
-:102E50009B8A45BF9B1E1C42E590871A8D13417AC1
-:102E6000CBA632559E4E7AD2C7002D157AAEFCDE27
-:102E7000CF45DF0798BDB9D0D7D9C39174DE577A53
-:102E8000EDB3097A6C76BF9EF92A3D98555F9EFE98
-:102E9000B74DEE779D1B85FFF784E67BCB14A29799
-:102EA0000ECA16FBC3A8F1DEEDB21EF901AA4C65ED
-:102EB000F75FCBE1A97AD4E46A74F7E09D79BDB9F4
-:102EC00098FF898D9125E0B351E385BDE758B19016
-:102ED000DBD1239837C0D3BC6CB17FE4659B0C6910
-:102EE0004A14E73FDECF8952611F8E19E1233B1B55
-:102EF000D7D9487E87CF638484AFCAE67BFBEA5E7E
-:102F0000E0E9E6838942CF38B1427B46C0C5E9CAD1
-:102F1000F3A37E1449F6B913725F51F8E77C33923C
-:102F2000F66929AF364A3ED908FA633F5B2CCE4199
-:102F30003D7C62E483B99AC02B7B50E8A79BE245B5
-:102F40005EF1013FEFB0BF824F4A19E1BDAF738F11
-:102F50009AE7A61651CEE93D05F40E3FF7287A33DD
-:102F60004B6024CE8D7DD17BFEE8F8519A89FCD64A
-:102F70007EF8ADB1D7115EEEB304D67238065A04AE
-:102F8000FED32D82BFB854F64795507DAF8DE72B09
-:102F90001E5EC4BCBC7E451A237B10AFCFE2509F9F
-:102FA00077833816EC1568571127FAADE8CFE89CFF
-:102FB000407F5C5E6523CDA47EBDA604D13EB68471
-:102FC000DAFB4DA2BDD7C2D34159429FEF5C171126
-:102FD0007806F2F9DEF45CF0C194F1463EF88F6CAD
-:102FE000B1DFAB74688E4B1A953C2958DFF39B8692
-:102FF000D07ED118E9ABDD03BABD20F4FF8A7B6E29
-:10300000BD6924E07B31D103F0BE9CBA8BFC0DF38B
-:103010009BE6DCF111CE0D3B22E9FB7539FA5DD957
-:1030200023A107BAE6EDE11FE6CF38644BE1EDF5E9
-:10303000D6B2B33FE7E954FFAEF7A00F4C9D6EA6A2
-:10304000FA5399B08FB22631CE4DFEAF2C29BCBFBA
-:103050009BC66A1433D011E9CC58C1E1AF90F4BBE0
-:1030600047F26F63249BFD3307E04ACFCDE4DF6F67
-:103070008286D98BFFEAB0AA3F4EDB02BD66D00440
-:10308000B1BE547DF4837EDF96EB69A3C48BCA7313
-:10309000BC52FDAAF5111D59B148ADC1C13CEDCCE2
-:1030A0001DFF08F86A4A269BB41978BFD38C5805CF
-:1030B0000E6F6705ADFB985C17F854672C48F1114B
-:1030C0008121C4D71DE33A3BEEE5F98E96C11EB2CD
-:1030D000F9C873F4029CAF5C2817724CC99763CE91
-:1030E000F618E25779AEAE94ACF1C7FA098F5EC11B
-:1030F000EB573A6C1DD80F163C322D167126959B56
-:10310000CC229E6383F15CCDCFBF2F812EE1E7E41B
-:10311000F0F33078067C54B541233E1CD4E8B1A5C9
-:10312000921CD39C985F9523980DF95EE589F4A0D5
-:10313000FC4C8337F14436FC119329655F73BC8FD7
-:10314000823D965110C7C11C7D3FF054D15C41E7D0
-:10315000C5E8029DE4D3DFB25D84E729B02742DEF3
-:1031600058DA53B10E6BD5F70467AE83F839920184
-:103170000F1D56672EE0EA581769C2BE3965ADE0EB
-:103180006BBECEEC16DEFE3E0B8BC27ABF5FB62F57
-:103190005F63F1B5F0FC403BB3C42480AF8A89AFD4
-:1031A0004B06EB1B818793FFCE4663FFAFDCB091EC
-:1031B000E0517CC12C6D1313A1DF6D7397DCCF7AC6
-:1031C000F8A864F0F80FD0AE9B1FA66BC4073C3D77
-:1031D0009045FC70F351944F191FCC5E59003F5637
-:1031E0000DF3C28F90C23CB00774B14ED227BAB86B
-:1031F0003E0179A6E489921B9C0FBC88EB51F455E3
-:10320000F2637B030789E37547839DD29F36389924
-:1032100085CB809D0D29947FB1C145696B431E7D8F
-:10322000FF598387F2BB1B46537E6F8397F2FB1ACD
-:103230002653FAF3061F7DE7782139A4E48A9247E2
-:103240008A9F945C0AE7A3791CBDD794507B927B3C
-:103250004ADE611EA6921E79A4E89BA9F9FC296E9C
-:10326000C8B1F6399017A5E6332FBC023B49B5C368
-:1032700013E1025E84DCEB72D849CE67D8D83E9C5D
-:10328000D71B57783BEE0DD9576FA9D69825844F99
-:103290006FAD8B6496103EBEAD3EDE902FAFFFE06B
-:1032A000CDFEBC7F2D5E77E470388EDDFDF993BFD7
-:1032B000E5DF9FBEFBCB1CD09BC3B1ED318CBB3A8D
-:1032C000AA1B8E04E49BACA43F0C8A12E720FC816D
-:1032D0002EF399589F4FDFFD575ADF1DF5112E33FE
-:1032E000AF37BF3E82F0F531E8C4F1FA7B49A78AD7
-:1032F00075C75F7805EB7CB58DE4DCFC26B92ED76D
-:10330000737C86E86B9FA532D2CB342F63F0C37CED
-:10331000F6EFB620DFF3D9679A3DA041F7E187A425
-:1033200072FE5D5FFF0B8ABFD2EA8F903EAC232E08
-:103330000B7602BFD5108FA5D5CB38ADF681863878
-:10334000AAE8115E1BE403781A749B9F7790615D75
-:10335000B366CD892DA04A7EAF5AAF91BED1AD2FB5
-:10336000E498898E75D9164ADFC31AA7FDA299F68B
-:1033700027C5AF5C5E78035817CDC5B68521727836
-:10338000BEFC5E9967A2547DAFCBB6513FEF41388A
-:10339000F07EEFCFCBB42D2039E7B2410EA8FAF37F
-:1033A000F34AEEC91C817EC625B190F5E8CDB15037
-:1033B000FB3A047AE17C6417F6FF9A3EF601A59782
-:1033C0009CC43FAF24F8E9BCB5E4C5E75F847F6CDB
-:1033D000C9271144A725C3A43DA220306A1AE933A6
-:1033E0005E87C6E7B94CD27FE2F39FC6B6F3F2E53B
-:1033F000BB85FD92A71D4897ADAE26BBD6320F5FA9
-:103400001F0990AB463FF2E1173F896DA773853FD7
-:103410000DF1857C5B486329F0171D9F04BBF87292
-:10342000D6790FE2BAC2DB2DD7BE8E15F67DE12725
-:1034300057FECBD2D7FF9C4C70ECB9900CB9B6FCC0
-:10344000F575C97A2FF35E1EE6BF567E7365075B7E
-:10345000CE367C05BF5B78BD9539D2AF7D05BB828A
-:10346000EC141646710C2BED020F5D819C38D6CB07
-:1034700078DDE36EE6829D9F43BB2CAE380F87F369
-:103480007C1F717CAFE488FDF9ACF4A39EDF692654
-:10349000BDF0FCCE18E2FF653B1F7EEB2A9E5FB6B7
-:1034A00055C3B0AC96B5119E96ED36337BE8F90660
-:1034B000769BC4BEE15CFA7C4C1DF86971ABE6DD1D
-:1034C0005600BFBC2BAE5FA8BE28F9696944EB2843
-:1034D000A28384FF7EA91FA97A8BF73F6C03BD7876
-:1034E000BD73A4B7BC140D5D9BFF75BE07384F6F4D
-:1034F000194E7EDDC5ADBB96D1BEBF33DA89297EBC
-:103500006935DAA30239623D057284BE715ADA7FE9
-:103510004FBF6826F90338B10EBFD4849D57B5DB81
-:103520002EDB6D9778BB2947AC47557F716B476C95
-:1035300036AFFFC5BE0F286D95F35AEC682BC27EDF
-:10354000F9C5EEE8C9014A7F3CE9353EDED9D671BE
-:10355000495AC8BA7A3D47C40D9FDD629E0C7CB1C2
-:10356000808A336AA5F99CDE99A6D1B916F8E6F8E7
-:1035700039BDFBE55813AD5BBF6827E968B20B7B2B
-:10358000AADBE292F60BBB137AC65CAED5C57179A5
-:1035900057BB5BC403847F57F569BDA582DF3B6DD4
-:1035A00082FFA5FF5EFA97102742FEF8185B00FB2A
-:1035B000EBBC61AE59B7409EBD6315F418E87A0CB8
-:1035C000E7AA79EF2792BD62A5D5D51FF93FBD6B5C
-:1035D00025FBF9BCE1729DA7B48F847DB2C32DF6A3
-:1035E000F59AF57C85F0290FE0F4F7F3F9D5044C52
-:1035F000144F793C2793E07AA2DAE4B5919F23989F
-:103600000B3BE5311BF39BA127FF2C92F4BB9A4C9B
-:1036100061777F02FCCED39A84606E22EC5D928E3D
-:103620003537F3F2107AD63C13CC85DE72C626EC21
-:10363000782877222D11F51A25DFA01FF4DBE1761B
-:103640009E23FD724F0C839E6F7A2546D8137E12FF
-:10365000497E07D5EF05C9578DD2CFE5DF26E003B8
-:103660005CD09B17DB9A73A157AA7117C736D37822
-:1036700067E4788BA39A85FF40C685A13E8D6F6570
-:103680005E9CC73B9F8B20FDF4CBD4B6BD18FFCB0F
-:10369000E786901FBCC31D58B88FCAB9DEC6E9B013
-:1036A000E4A71141C07BEAB918F2739EB20A3DE863
-:1036B000544C32E94147621E9D87FEBAB64668B057
-:1036C000A79CD2982D05E5DBFA91BF6A49433DF9E5
-:1036D0000996F0E50E7F344F27C3AF7C6ADB10B24A
-:1036E000B39CFAA599FC8BFCFB7A7CD759F3BCBB45
-:1036F000B0EE7644939DEDCB9FFE6D48A8FF41A5AB
-:103700004BB61AED498AFEAA3C2957ACAFA45C819E
-:10371000C7945CB1CFD446B73E9A49F314EB95D326
-:1037200081CE5B7C7D24C33E7DACF5D564CD013C70
-:1037300007737F0CBCEF10E79A2F775AC92FB2E4BA
-:1037400095182FD96FEEBDC284FD628959E8BF4B31
-:1037500038BB8954D88796C4E6927D88E39BCE8F88
-:103760009DDBCC721C31EEA9EDE9C2FE1E94F9BDC1
-:103770008501F0F9940476DBCDA4DF6C29025E2F7D
-:103780006C8D36812FF8385EF8ED97DCF50381CF2C
-:10379000B885A48F33C4418F82BF5CC8CBDA7BAFBE
-:1037A0008A433C0C7BDFCC20FA2E583CFD210FC312
-:1037B000F1B52857CACBBD4FDAE03FABE1EB05F1DD
-:1037C000414BA5DF74E94F35D2E796DE73D563240C
-:1037D00007DFB3B21C0EC799D6876343E95126FBB6
-:1037E000E969EFA1FA4B797DD1FE9D588267BBD57F
-:1037F0000378C2E978D9ED7F6ABEACF6DDFCD1CAA8
-:10380000F7F5A24BE77D81B57DFF13C8919D911E11
-:103810003F7D6D25BFF3696BEB42CCFBF40B91242C
-:103820005F4EC78BF5FE0597877E1BE0B8F121B28E
-:103830006FFC661A83E85E1430F6ABC69D992BE4E4
-:103840006F6DA2270EFE8C5A4E07F4C7E9F23D6A4F
-:10385000FFBE95DA87CF63A46CD7BD3E5F88267E16
-:10386000393D40D0E3F48B83695FE988177CCEE172
-:10387000CDC039E574BC487153067CB0449E434FBB
-:103880008F6BA573F7696D17A51D56D16E49BDF4F1
-:10389000DB72BE4B01DF8027E1B7B26F68831E0188
-:1038A000FBF4A8124A83110997DA99C19FD8875E61
-:1038B000CC15F62CA83590EBE4DF20FDA4D50679D5
-:1038C000AC4B3DAE66E7A5FE32F283EED4C8EFF313
-:1038D000A05CA7803A49D9C7393F2EF56B5EC41B5F
-:1038E0002D6D5AB118FCBEB46EE32DE077358FA56F
-:1038F000163619E7AB0ECD4CF07444F275033C84D8
-:103900008E97D983DFCD0A5E809C4C7A2629D75BBF
-:1039100072C57E857C33EFAFA649DB40E3B8D5792D
-:1039200052CC4FE189A3C5063B193FE78BF23EE637
-:10393000AFE00C9FBF82A73557D8273ADCAE87C6C9
-:1039400082DEBF3293FDF4C2D7C3E312BE452FC35C
-:1039500089ADDB5ECCE17F9DEFD5E8C70FF986F539
-:103960000C7B348733778BD1FF91B7D5981FBAD3AF
-:10397000982FD86DCC17ED37E63D878DF96D725CC9
-:1039800085279C7311D786732E529C735DB9E29C78
-:103990008B3CCEB94871CEC5779C7391C7391779E6
-:1039A0009C7391C7391729CEB9F87E4ECAEF1A69B0
-:1039B00077041D28BEEAD548E507A7F5727E4E328A
-:1039C000C94FE5CF3CBFB880F2DDF69C323BD973DE
-:1039D000549CCE2D71FAD15CF21BB6DD930ABA5914
-:1039E000DAC98EBBFCE7C28E5B5312E9807DA17DF4
-:1039F000DD17F7407D2A8AD33FCDA5B8A6CEED22AC
-:103A00005E294872A37D8DEBFD6B05FDC8CEA1E25A
-:103A10006E2AB0DF25F44DC7703F0ADB60F49B844B
-:103A2000FB51C2FD27E17CA0FC264F5B3B5321EFFD
-:103A30008F3F67DF00F88F4BFB189BED24FD4BE9B0
-:103A4000D5DDFAD783DA33D8B7BFC94DA0F65D47C5
-:103A5000B8BEDDCB7EABD2CA8B25A43776E73768FC
-:103A6000268A1B4989A57D6895842943EBECB81704
-:103A7000F22EC644FBF8058789CE05173E34931E07
-:103A80003118FA79C87C8604A20CFC95BF2321CC9E
-:103A9000FF37C0507FD8BECC30FFDF50A35F6AFA3B
-:103AA0009A03385F4FDB30DC50AFCA7755181E25BC
-:103AB000DC522F6D5CBD3903F267554C17C1BF6AEC
-:103AC0004F24C5D5567178BDF0CB21C351506DF749
-:103AD0004E05FEAA5BADF1D8E72BE5FEC3EA8DFBF0
-:103AE00071B585F99D093D7C57ED64DE78DEFE6C8D
-:103AF00071F37613A7DB59D39647C7BAE0576AC963
-:103B00007072BEBA5D6B4DBE92F7F7378B5E309820
-:103B1000F35B8635F8C372C8CB5D596C0DAF777C0B
-:103B2000C3CBB1A4774B3ECBB03AA340EF966633FC
-:103B30009D0B60973227F4F0434B736254B6A36732
-:103B40009E3DF4FF9AE6C7E9E2C13DC52EC7C1819B
-:103B5000ABA0C7B58AF9568FD3FCA427CBF9AC9498
-:103B6000FB0ACB16FDDC2EF327E47941CDEFCC9098
-:103B700003452EF8311BF6659821C74D3BB7E3FE90
-:103B8000C0DD51FA758347225E32E7B763F9B84B5F
-:103B90003E12F1BA7FDC3421F64AE89F2F583D539C
-:103BA00078FEDEE6676D38172FB1046C3877563F24
-:103BB000D762F3F2F4BA1D2DF47DE18E0A3A6F2F2D
-:103BC0006275748E3CA9E26F253EAAC76B5B9C1C94
-:103BD000EE17070BB9511D25E2364ACD63DF445C71
-:103BE000FA851D5A31E63BDDB7CB5601FBB3AC1766
-:103BF000BE3EBADE9D56DA0FF6A456E1F7EC6B3DF9
-:103C0000CC08E6D17A9876D145E9F48B43E91CFBE0
-:103C100011F315929C28083BCFBE2BE290BBF68B8C
-:103C200075506D0B264DC33A79C34AEBA496CBAFC2
-:103C3000D1253827333686A7BEB16603BF2E9F181D
-:103C40006DE0E7D92CC1E0479E894B9B21F9E953F0
-:103C5000B20CF5674DCF0FE3FF929E729223630C77
-:103C60007126B5ABFD2E8DE259C61BBFF37435F13D
-:103C7000D90D86F6B5ECE69E7A38076FFD35E199E9
-:103C8000B1361BCE5BD5261157335BEF90DFDBE9F6
-:103C90003B9F88611D0ECAF2FC56EC8B56B2CB2BB3
-:103CA000BBF46CFC3BABB77D91135A8E8BF850D8AC
-:103CB000170CF1851C003A7F3241875A69EFA9CD74
-:103CC00013F69E5A7F9B0DF1B71CFF96348E9265BA
-:103CD000CD1AD9F3787D7B5A82C8AFC6F7DDC6FB13
-:103CE00006E8EF22CA8F982BB05EC2CB97F17943DA
-:103CF000CF58063B0DEC4CAA7FD9AFE2CF459B8D48
-:103D000076A365B0E784D0F1ABC12EE2D3253B7634
-:103D1000BD3580E3659A2FBE18EBA7A6B5CC5A51E6
-:103D200070299F29F97EA1DA447EEEAE770F119FAC
-:103D300075555B889FBF0B1FCBBCC29E19CE7F0BF6
-:103D4000F97CE0975DB85BF30434510F781900BE3D
-:103D50000CC34B5A2FF85278EAC65B58F922FC6321
-:103D600004E206B440D0DD1B5E241E55FF6178627C
-:103D7000A38D7858A8BBDE87BC5978C4CC02973194
-:103D8000EF45981FC6E7F3C3F8375F147612E5379F
-:103D90009879D142F96E3EF189F8E9E9538CEBB29A
-:103DA0009B6F7C629DCCB8984CEDFEB7F9E7BBF8F1
-:103DB00046C11D1E9FACEEF7FCF76069271CC94683
-:103DC000D2FABFCCB861B5DF2B3C0FBA7B34C51338
-:103DD000753932497FE8DE6F9CC6F29531991447F8
-:103DE000AC4BFB9C92BBBAACA7C6A9E0E5AEE1E048
-:103DF000E381C9B0BBDED39495D11EA297E8EBACAA
-:103E00006437CD5893486945A43319FB45C51AB3A7
-:103E10000FFBE067F7F54F1E0D3BFC3A6BD214DE4B
-:103E2000F567778EC86085C897527A7C63C4EC507A
-:103E30007BB64A5D79623FA8BDFB28ED5F674DEF19
-:103E4000C6CEC63A5BB7271621354BD77D30CAC9D7
-:103E5000558F168B3E280F71845ACB7627F0E66C6F
-:103E600029823D7A1868D7AF474F58B2AEB43FECBD
-:103E70005F35DF1C7A0AFBBBBEC69A0C3DF3D487C4
-:103E80007CFFD368FF22FDE024E28F93E0B78AA68F
-:103E9000FB6D2735E685FF66B1F94091D3B09FEE03
-:103EA0009F09385E8DD287E5919F36B03D05E37B53
-:103EB000FC142FA9AFC989EBCD5EA2D2E59B85FE8C
-:103EC000B65DD96BA55D177A3BF2D0DBE11482DEDB
-:103ED0008E3CF476A4D0DBF1BD4CDAEB07357616D8
-:103EE000E3DCE91FCFF2EA687F75E4412F5FA54567
-:103EF00079206F56699EFEB083B1ADA9625F0DA3B4
-:103F0000AF4AAFEEE4BA5508BF5F7BD1CE42E3C7FC
-:103F1000C6B178437E823DD550BFD4E936945F97D1
-:103F200032C4507EBDABD890BF31EF4A43FD9B3CBD
-:103F3000E30CF9EF8DBEDE50BFCC5B66C84F9B3CF7
-:103F4000C7507F86AFC2503E6BF66243F91C7D8539
-:103F5000217F4BF59D86FAB7D6AD31947B99D382FC
-:103F6000FD6D3FCE531CEF6FE03CC5D355BFCA710A
-:103F700084D275EC04535D6FF6F8EF4BFEDD3CC464
-:103F8000BB02FC992EEF81A4CBFB1C4D792EE2CF16
-:103F900034DCDBA7F36C5B2AF826BC5E78F9D8E842
-:103FA00083175C9C867FD83173BA85CB87B1571C49
-:103FB0001C9EC5F309431E986EE17265EC55075FC0
-:103FC000CEE4F90143DE14E5C30E5E40F903431E5F
-:103FD00012F9698C548BCC21E3A7FBF93CC65E9B9C
-:103FE000B9C123EC21BDC65BAA147840DC22F08065
-:103FF00034C8F913E941CE9F480F73FEACCA66EC92
-:104000002DCE9F488FF07325BEBFCDCF9548DFE5FD
-:10401000E74AA4EFF17325D2367EAE44FA9B86D9E7
-:10402000947ED8A053BBFF6CA8A6F468431D7DFF07
-:10403000B8A19ED2DF37F8E97B204FD90F826467A1
-:1040400051FEA465F0E3C10EB7CF7A26D4CFAAFC07
-:1040500081CAFFD758C7DAA3B14EDB2DF19FDB7BB6
-:10406000FC7A7DCB590BFB3C44DF6A89F63E9F47C7
-:104070007692814E92D7F2FB786D5A7A094FFFE221
-:10408000D27781DE334A2AD7C5B9710FA4CE0A7E12
-:10409000F9C8D4FBBDE0A63C617F5839C4BB97F892
-:1040A00044FAB1951FB93B3E25C4CF6D0A898BA157
-:1040B000BF90F816E56F56F134D7D8457C9EF227AD
-:1040C000ABB819D55FE94546F2EEEAF516D24F6274
-:1040D0002C2C88FE557CCCD5F6D662C40B5C5DE3F7
-:1040E000A038B4FEFCBBAD84EA79CD3CDDFA675E56
-:1040F000BFA8C77FDD5FC2CFCB09FED28B3AD95DA7
-:10410000AF96FE7BB4B78B723FDA23760A7A064FFE
-:10411000C9AEF624E29C4A7AFCE9A81F2DEA07D131
-:104120005FF67FF1F1627BD64F7A426B31E2A9D222
-:104130009739289E6ACBB820DDDF5AEED63F039D23
-:104140007C11CE4FA369FD64A5C34E5026F5DE6FEA
-:10415000A1C31768A7F0A3F0ACE8A2F01B12774444
-:1041600078ED8B4EE1F409A78BA247E9C51E3C030D
-:104170004F97D2A1874EB0C7FEBF4287119656BA5D
-:10418000FF175163F700AEEFA2CB6D9D6C12EE13DB
-:104190000FCED49B80E78A8BAEB790AF64E32661E5
-:1041A0006B52E59EEF289F85F27E7D97DFD147F920
-:1041B0003B912A1EC1EB28E6749920E5C7AA5281DB
-:1041C000DFC96E33E17742C122D2479943E8752EA9
-:1041D000FE1FE4C9A4AF7D4DE86F5292513F54FEDB
-:1041E000E01B647F93C3FCC03748BDF18630BD70CF
-:1041F000D410A9F7B9995B9CFBC43DF789729F4E17
-:104200009374CEE287F9B1A023D32D105A8771CFD2
-:10421000BD08F7C0FD94BF9E0528BD910569DFBAB2
-:10422000890B38E4BFC718C5331E8A9E5ABE9CF757
-:104230003761F8846C7C0FB9D777DD907E74AFEF6F
-:104240000FCE907B7D0727BA486F3868CF223D0696
-:10425000EBC01A6247FB2597FB086538C4F705A435
-:104260006FF27D219B33F92FF8BE80FC0D796B181E
-:10427000DA4D7219E34D54FB1B9DE3996578DF72AB
-:10428000F7C6A25707C2BEF24EFCE089B03BBF138F
-:104290007FC544CCF79DF8FE269146D8282D7C2575
-:1042A000BB373D4BF161CF78939825F152FC2A7CC6
-:1042B00086E351E1F79FC0E78ADEF0D9041CC0AE67
-:1042C00067FF20362513FE2FB1FE6B5F29EC0FF838
-:1042D0004F0134C425DB055EC2ED3B5F34B081C0C5
-:1042E0002FDB1A47DFEF903C7475FD18AA7F4DFD58
-:1042F000689ADF5551FADA217C9C3325C15CAE39CE
-:10430000B02FB634D2FDDBB32F9A3DD0BF6BCCAE0D
-:104310000D1EACF577C47D39F6F5A10CF8DBD8D6C7
-:10432000DEE3766BEC0A6F7EC2A737D3DB24F63F61
-:10433000718F58EDBF032344BCABBACFDAD77E3CB4
-:104340002A4AC8958111420E2A3AF176944FE3FD2C
-:104350008CE27223EDA128D2BF4724781F073ED5F7
-:10436000391AF14DD8A7AE09E6C7213F19E7499E92
-:104370007F5BDE4F7B7B685D5226C7F7219BFE2C5F
-:10438000DA31F3D766ACEBC61C8DEEB9771DC94A9E
-:1043900002BEB7A97557C48A42DF1B50FA71F7787D
-:1043A0004966F28BAF847F3409E7263BD98BAE6137
-:1043B000B9E4379D28C72FFD6525BD83A0EE7D4458
-:1043C000A4988CEFE7B8A20CEFC144E72518F231AE
-:1043D0009E0186FA71A3330DE5F1DEA186F2C4C910
-:1043E00025867C3FDF1843FDFEB3C71BDF75D36F07
-:1043F00030D44FABBED99057F22B4D7C62E9757328
-:104400000DED07D5CF37D477FB9718DFB7F17BDBFE
-:10441000F29221F7C45FD6FA9586F21FC78A7B0D08
-:10442000931D0BE9BD8A9CE6BB8CE34B3AA5C509FD
-:104430003A319790AF7EFE1FF8A634C5286F273813
-:104440008DE76DAE0F6AD8DFD3EA2C86EF9FFD0FA4
-:10445000E91C8E972EBE3505511FFA10CF5FA30FB2
-:104460007D08768D8949564F80097B7AE8BC604F7C
-:104470000FC503ECE9A179D8D38DEF4219E90E7B82
-:104480007A68F9F02346BA8F6C33D2FD8AA346BA14
-:104490002B7E0CA7CF95ED467E08A7CF5527C3F8F6
-:1044A00043D26336FFEFEFE29E34D16B9243634F0A
-:1044B000B8FF79FA240FE5F4C9EFA1CFFF49D35330
-:1044C00087F6C3FDF40B1936D0AB53BCD7B742CA3D
-:1044D0004F154FC8CFBBE23EDD5D66F2EF1F3335AF
-:1044E000D37B49079DBA1BED6F2BA8D3E03F4861F2
-:1044F000BE5D0B397CF3FE2382FC09F306897B9DAC
-:10450000ACA09DE2EC959C9B9726E258860C95E723
-:104510000B8F886729182AF4C2188F93E25E2B0A42
-:10452000C43D027E2CC8985708FE793712EF1676E4
-:104530006D12F6FB76ABB85FEAE77C04BF18F44473
-:10454000E871E9528F6AFC9DDD0EF8076F66867D83
-:104550007148C06E88BBCCDFE134E40B5B530CF5D3
-:1045600087ED7319CA8B837986F2E1473C86FCC8D4
-:10457000B6D186FA571CF51AF257B64F36D4BFEAB1
-:10458000A4CF904F639D8F03BF8334711EAD1A2A51
-:10459000E278F81A227FD2BC7BE3C5FD41794E5503
-:1045A0007AB08AC7D525DF85EBD3836C3AC5F73659
-:1045B000A6320FDD03B0CBF30933EAD9BA8CA75585
-:1045C000FA28F31BE369551C6DB73E2EF56FA50F56
-:1045D00087C4D17A43E368E7C97BBEE1FB5E9DA453
-:1045E0007B38FC836C62BE8D77DAE8DE82822B1C1E
-:1045F0009EBFC9F8CE6DF6DEEF8FDC3D54F8DB7F51
-:1046000099E5FB3EF8F529888FACDEC6F3B4FB399B
-:104610007F35FEBBCDB3D6F5DDE3CD1B26E6536E6D
-:1046200032DD565640714BB37F1632FE0FE5B8AB04
-:104630000AB45EE7372F4EC415B1389B0BFCDBF78D
-:1046400078029F2936D644F75C64DCF9AD1B5A1F0B
-:104650008489BCDCD66C15EF9705ACE08729E3B9FB
-:10466000FE540CBBD5370F3BB89EF154BD85EC1002
-:104670008F0CBD69863FBBE71EC1207EBE007F4018
-:1046800057C1B9C45E20E266F70E15EBBFD4FC75C6
-:1046900077FC37D9D31993F25B9C5B7AE137E2431D
-:1046A000358F7F751C78389ED4B990C97D275BC241
-:1046B000A5F0D77D8E97F853F1F8AE1556DF330E7F
-:1046C0008AEB9F8C782645BF8105822F4F0E15F40B
-:1046D000463DC8A3BEEA959A0BE260AFED62AE38E4
-:1046E000E7B7D823FF557851F8EFEB7E4F5FF2E143
-:1046F00012B9D0C77D9FBEF893FEFE817B3F21F2A9
-:1047000041C497487A04B24DE4CFBD37C6B88EFB9A
-:10471000E70BFCEE57FB859F9F278D7282C1BEDCA5
-:10472000B8CE2CE584D857A16FE0FB827556D237FE
-:1047300058BD8847AE96B298315FF29811F0C75ACB
-:10474000E93DAB6BBC8CF491F90E5BA085D7AFF063
-:1047500087EFAB5E6A4FFE1A17DE2DF1DC03FB7BA1
-:10476000E57A63BD450EF1AED782B073E922792EAA
-:104770005D14762E8DCC97FBB28779486F92FE67D9
-:104780000567375F05B2282E18E754B3B09750BCC1
-:1047900052B71D1FFE85907734393EA3F2B06F37B4
-:1047A000597A8D23EBC6671F7EF233F093BBB0FEC0
-:1047B000BBE8FE4FD7EE48E14753FE0B59FF8CFF95
-:1047C0000295A33E7A3B5BDC56043F52B7BF23CC35
-:1047D0006FD2E530C58E467F3BC5FB0B2A0E60C904
-:1047E0005F0345CE103FA7DE6E32C45D84A7FA9A00
-:1047F0003D1417D062D14BF2F93C4E5B3C76BC17AE
-:10480000799FE36032EE6B4F91F69A7078BBF5D0EA
-:10481000B19AF013FA851EDA3559233D94CB4586BB
-:1048200075A4FCD9652C988454F90FF4F5A309CF2D
-:10483000CA7F50111C4D70CE685C64C5937DED8FAE
-:10484000AF2E8D72F5F815DAD3453C4A5FFE8569C7
-:10485000173DD4DFF48B63A89FB27CB7B8C7D5F4FB
-:10486000E00AF0D1D01DCC8A79B687C563ABF4409D
-:10487000BEB07F1FCB57725BC6B9ACD1849EAD3141
-:1048800015F742725BE52F34CB7CA9C8AF5A27F2EB
-:10489000EDF21DA3EDD2DE807922C57C702EDE29DB
-:1048A000ED11980752CC03DF21A790879C421E721E
-:1048B0000A79C829A49053F83E9FF9328ACDC20FD5
-:1048C000323164DDC00F3231440F821F24340F3F78
-:1048D00048687DF84142CBE107092D871F24340F3A
-:1048E0003F48687DF84142F36CF4F53D79C8356F77
-:1048F00099213F8DEBE31343D62DFC20A1FDC30F7F
-:1049000062E84F5F61687F0BAB37B4871F24B4FE4A
-:104910006DF59AC14F729BBC975EB93981F8638E71
-:10492000DBF7C37C4EDF3F447F738715E734F3FE2C
-:10493000C5747EAA8DF2083A374F1674373141E7B5
-:10494000CE3944E7D536912F1571B1BDF91B2666D6
-:104950000B7F0352F81B90C2DF8014FE06BC870D4C
-:104960007F0352F81BF01DFE06A4F0372085BF011F
-:1049700029FC0D48E16F400A7F03DAC1DF8014FE95
-:10498000067C87BF0129FC0DF87E0C7E8FEC1EB8DB
-:10499000A0B7671BCE779C0F0DE73BA7210FBD3D4E
-:1049A000B43EF4F6D072E8EDA1E5D0DB43F3D0DB02
-:1049B00043EB436F0FCDB70D75D1BA84FE1EDA0EEF
-:1049C000FA7B68BEB0D9FF266C4C376D3977186911
-:1049D0007B8CF694C645C1FBCF1F9F01BF517BA4C2
-:1049E0009611CF97BC553B356322D7CF74195F56CC
-:1049F000C43AE97D675DBE5BA30719C5C316FE25F2
-:104A000045C805756F087F9CEEC5BB199D03CAE4B8
-:104A10007EAADA7B98D34C724BD6EFC9F75E2F7C17
-:104A20007C558FE465081CFC80588C3888E2D58E54
-:104A300012C4716F3769220E72AD88430DE72B7374
-:104A400081904BDB4DBB0E4621AEA542A3F7E2732E
-:104A50002DEC08DEF12E6CAE2B81BE703A3F5ECE9F
-:104A6000AB6E0CE26214DCCA0EC8E504DDAB1ADBE7
-:104A7000C96C5505784F8CD91640BEDB849E807674
-:104A8000383FE6FB35EF3321FCFDE77CB1BFE9FEA3
-:104A90001563AAF8F7FC9D7563705F6B4A9468F71D
-:104AA00093A763098F539BB467702F6EEC4EE6C5D6
-:104AB000FDCB6FA43CCDDFE9B455D1B84EBAE7A524
-:104AC000FAADD89241F7D22A58FBC414B2E56BF480
-:104AD0008EB9C21B9FDF61CC8F8BF82356D247C59E
-:104AE0007D9128795F44DD13715B7CC1A1237BEE4E
-:104AF0008B5C3D22BE14F15A6CBF7877EFA611157E
-:104B0000EBFAF1FEF5807877EFEA3FD5BD49F9ADD4
-:104B1000E2DD3D628351340EED6B83FD1ABDF7304B
-:104B2000D5DF624A72E1FEE81A6B32EAEF641EA832
-:104B30003F8399B807A9E02B606D26BC3BCEB798A0
-:104B40004389217CC425C074D0BDD863A5F720CA91
-:104B50002C4E2BE446F83E7E693C5D989E10160F65
-:104B6000D1B8FA68863913F61E932708B9B5279A83
-:104B7000F405A5EF54C838A80B4D6FD27BD615BBF2
-:104B8000847EA0733900F9A7E2236AB3021926E8EC
-:104B90000B035A8A12CC62FF2FC07D24FFCB334710
-:104BA000BB708FF14D8AD7AF5837324EDCD711FE2C
-:104BB000872A89A72A19FFC20A9CC9D03BD53BA6E0
-:104BC000A5E6B17174DFAD59E873CAFE52F1ABE1ED
-:104BD0006F81CE154FCAF740D657D03DA0F038149C
-:104BE000A51FAAF74E16375929BE6571981EB854ED
-:104BF000EA814BC3F4C01B0AC2F440F53E9DAC539E
-:104C0000F1AB4333484FA913EFF195AF117A0BDBAA
-:104C100025DEB12F5F33C184772BCAF7783D5A2F39
-:104C2000FCF1BED45FA660D044C4F90CA074E6C504
-:104C3000144A675DCC233980BB18A07FFBAB8CF492
-:104C4000E90FA4BE3203717EB81FE78F90F17C8C10
-:104C5000F4A562E62C85DC18EAD50EC17C3DC5AA18
-:104C6000AF431CE1941646F7616E825EC30B664348
-:104C7000CF190E3E7797D2BD80C91ADDAFB869C48F
-:104C80000AC9D79CCF19F8DC2FF9D647F9EEFD40B9
-:104C9000F2B7EEEFB0D0BBAC7ECD8677D974799EFB
-:104CA00055FC1BCEE7F3E4EF4D3087B03375DBA145
-:104CB000002C3DAE72CD4CE88BF360BB1B2009C9C4
-:104CC00051145320CA9B0AAE99D984C3CDFFD03E5C
-:104CD00051AE7E8781EB5990A7B7DE5E6C9B1F2299
-:104CE00057CA8AC63F5BD8AF87EEF3BBEF8D15F48A
-:104CF00087FEBFF2BE9CFEDF767FB192E319EB63C5
-:104D00005E5CFB1D7819776B01F34E1C8DF798D50F
-:104D10003C5910F16A7365FED7058BFE737D01E186
-:104D200087F2819D5366FA69BD0879750BE4951980
-:104D3000724A7FAA00F73BECED93408FE8824E79F0
-:104D40001F5EEE4761F6885F17083A84DB252A0B61
-:104D5000841C671657C62D744FD545763D05FF67F1
-:104D600056E3BD4195FE52ED230DFF9A78FBAF92BD
-:104D7000F59F437E3C6A12F7B707989B99B40F8959
-:104D8000DFC990EB87C9F70C7AE8CFA506E87F9FCB
-:104D9000E60CA5BFBE5E13F7A6FBB0E3B0BCCEC762
-:104DA000B7C18ED7207E9FE3E95CC1474FDF652303
-:104DB000FDBBDCD6F626DE695278FCA4FE4756F130
-:104DC0003B2FC11CBC3F35B72E92DE7B2D2BF2B59D
-:104DD000812ED1051EA2C7B38829E5F5DB9DBE0F44
-:104DE000309FDA0D079EC2FDF1E5FBDD74AFB162C5
-:104DF0005FF13D78D7A2AC483F8AF20A87D386FD9F
-:104E00007B59533CED67F3FACBFB85AC93FC540A1A
-:104E1000FF9D05C28EB5BD48F47F5E9E432028CB22
-:104E20000CF5645C71D83A51F6C1703B43F87B02D3
-:104E30007DAD1F654F80FDC016625F54F6096BDEC5
-:104E40006773B07F96DB8CF7E154EA2E94E75C79C8
-:104E50000E5CD0BD7F154CEA0F7D79A346BF5B5336
-:104E6000E570CDBA92E7AB8E581129C8A624B8C414
-:104E70003B12F7897724E6F3F50A79532EE386AAE5
-:104E8000368FA6F55615E06962DFEBF2968D87D274
-:104E90005F05FF04BD744FBCCAE9B52584ACFBCAED
-:104EA00066CD70CF5CE5E30B853DAE1C4F98974017
-:104EB0005EB86D78CBA59CAB1588437317BA0C7E92
-:104EC000575E8FE218A664B2B7C43B3E1C6EB7189B
-:104ED000AF24A4FFF9CDC6FBF2BCBE7897A2308602
-:104EE000FAAB70F279C3FEE174129C1C0F84A7CE5A
-:104EF00007797F2E1A87E851190C5871DE2E47FC6E
-:104F000004CFCF7506AC18677E9378B742DF20C612
-:104F1000D1D7C7DB0AA12F599CB674E04FBE6BCF27
-:104F2000E1233958C5F182FB3FEA1E60387E2A240E
-:104F3000BC55CDF1463DAC79A315F498D3C7FDF926
-:104F40009B24DDE7378DA3FBCF55162FC5D7EB127A
-:104F5000BF7F5C11793FFC0373363D6675F3FCD56A
-:104F600085827F6F92789D9219CCA1F76956447A19
-:104F700000E71C6733CDAF1BBF8F707C687807C517
-:104F800047F8E57CE1471C59D526233D7BE011F825
-:104F9000ADDA5441EB6DA145B73943E1D87C200728
-:104FA000F77AE6F0F58D77779853A7FB369F3F3277
-:104FB0002B83E6C9E1045E633CAE49786F86F30952
-:104FC000F1B1E217753F588DB7A050DC135C50D893
-:104FD000BB7DBD675D7A49BF69E4F485DDBBAF7514
-:104FE00069C345233EAEAD4ABC0316BE4ED5FA5446
-:104FF000EB52AD53B57E9FB2FA82295A8F9CE1FBEA
-:105000006DDDCF7AC1D3B312DEB992AE1CAF874348
-:10501000EF156D2814F2A83CD3B8DED11FFABD4BB2
-:10502000958F0FE6E01EA0AAAFC62D97BFD305BE91
-:1050300007BFDD25E98EFA2BA9BEF17E4465B7BC1A
-:10504000D8B92E19F2629746FAEECA070FA5FF1BD0
-:10505000F4D817841E7BBA66DBB254D80D2C818C31
-:10506000D0F799AA82423E2CE0FA0FE4C542B94F2C
-:105070005F97A3DF573832A4DEC32FE4EA42BE04B1
-:10508000215F7EFFC26B1F8D71F5EC9F0AFEF9EB6D
-:105090007F6DAD7084E24BF0F9FD795D74EFABD2BA
-:1050A000617321CEB6B2A982E42D4BE1E7092D242C
-:1050B0004E2A8C0F2A9A347A37ABB27E54C0FCBF8A
-:1050C00028972B3794D1DB3C8A4EEAFD0DB59F2AF9
-:1050D000F8774AF8E74A3E7E49AEBFB9D56EDB4263
-:1050E0005AF76E5B25F85F96CFA9327EEFA653B7CD
-:1050F0009FB9E09E14798F85CE251BACC2BEB73315
-:1051000086F4D5D32B5F796F26AFF7E5A32D19D0A1
-:105110004F141C8BA41D6F81B4C72D947A2BA7D379
-:105120001B85217276D1D3824E952FFEEA53BC0F98
-:10513000559E29E5D983E27EF9FCD65D44B739EB6B
-:10514000375ADDBCDE7B856E839CAEAC2B76C23ECF
-:105150003D777D8B1572E0BD4281B7707E2F9771D0
-:10516000A90AAFD877B410FF85AA0FF9B78B8F7350
-:10517000FB8AC858C465A871FE5BF271655D7C024C
-:10518000C6ABACABF821CE3D4ADE87AFBBE3916244
-:105190003DCCE7FD615D1E1FE7A17BB6E5F2F7A5FB
-:1051A000C2EB9F9374FBB155BC239816DDFA1CC566
-:1051B000152C8FF2403E6467B707302EF81970DB6C
-:1051C0004CE2DDC1EC9AF6AF0007578B293E05296A
-:1051D000DE3B829A9CCCF3CF98C47D20C496204DB0
-:1051E0002A12FC00D314CA59523BBD7F16129F6984
-:1051F000E0571BDBBA1EEFAFD89218FDDE8BE24FF3
-:10520000D58FE24FC5BF7DCDCF517479F33BEE967C
-:1052100076883C4F06EE51CC7B6830BDCFFF5DF306
-:10522000B4C977F0BAE71B217EB7E092F9668B73B9
-:105230004BDFF3DD549ADCCB7CC3E7A9D6898ABD6A
-:10524000EEF62B340BBFC2718DEF5FBCDDF1159113
-:1052500014F7A5E6A5ECDE971B2FEF294A9076847C
-:10526000F618E891E5F2F7205850E4F1BD2CE4BBC4
-:10527000DAF7D5BB614A3E9FA893FB226B7F10EB08
-:1052800099D567D13B19C79A8FC7E0FD8EE3E30438
-:105290007CAADDED5671EF95C5D85C783F919FAF44
-:1052A000E8771F1634F5A773E4ADF55924176EF5AA
-:1052B000C70BBB83D4EF174A39187D7BC53D57A078
-:1052C000FE66B753E3E32C70783EDF4CEDF33DD040
-:1052D00007A33795D93249EF15E700E507BA5D63B3
-:1052E0003EBACF043989F5653A908D7D67D16671F4
-:1052F0000E986262EBE12F1CD4E89B940A39F1B856
-:105300007837926D31BEAB7430C7776311F016F603
-:105310001ED9EDD6566F7FC871AE6FC0CEB4C0E156
-:1053200023BDFD6D29278F6DEAA0F7C9155E2FB942
-:10533000A76213F7523B634C647FBBDCFB2A55D258
-:105340009FA4F846F9A39EC0FF5D093C99685F2BB6
-:105350003597D3BB3EF76C9A4069D5C6D247FD85D9
-:10536000B80FEB4B1E43705BC93E56553B41DC1FEB
-:105370007D26221EE79B0CAB3F23542FAD6AB997C5
-:10538000EEA99C6C89A47B2A139D6513E393E8BD69
-:105390005DBAF7A5EAFD40AECB25B5130CF74C1668
-:1053A000F03E1107FBE7D6688A2B55F747EE8ED201
-:1053B000BF5FD44FDC23B9D225EE8FA4527D57AF07
-:1053C000F670957EDE20EE2384DC8B993A87B7AFAA
-:1053D000A97D3916FD2C7DE483511C33B03FAD050A
-:1053E000DDBAEFC56C16F7621A715E821E99E09BFA
-:1053F0003907F8FFA599F0DFD778D5F85192907367
-:10540000C4AD8138D25BF520B3C19FAC3B19E9C56F
-:1054100027CDAC1E7A80D25FD4F747255E4EC635C5
-:1054200067803F166F7F2C03FBCBA918912FDF3EBF
-:10543000EB6DC82B7D6B84D0CF2D8CF4E14ABFD0AF
-:10544000AF5975827A1733721EFCB145D1E21D1E29
-:10545000797F46C1A5DE5B3D6511EFC5E05E0CF8C6
-:10546000FD134B7001E8FB09D75F718EFD819463DA
-:105470009F349BE97747FC7CA1400FF9A4F9E5181C
-:10548000DCCF55FA5AA9F9F75EBC47B3728FB8A7BB
-:105490008A77CDE9CD4A69075926ED202B5FB54EB5
-:1054A000C2EF8E70FD8BBED45882B6DEE8B744EAF8
-:1054B00057DDF9DDBBE8DC56B353E80F35AD1DA46D
-:1054C0003F287D44DD8B5BBAB383F409D56ED96E7A
-:1054D0008197DADDE27B05E2D6E5EF856AD9384FC0
-:1054E0006B94FFB460FEAC3596D07C05E53F2D5043
-:1054F000F6914ED207EFCFFB0D9DC36B9B64BF3C73
-:105500006F0D19EF4D30693FF13DCB81F662DF57EA
-:10551000E5B5BBE3A97DB0366A3DF679EF32870584
-:105520006963AD83F6FD2D75A63CCB080017E581B8
-:105530001EB75FC66FF55BFA9F91B01FA4B2CE4352
-:1055400078F7F5A0533F0A7E55BF67A9EEBD9C7F53
-:10555000FD8BE1E8FF9A41ED17F0C683754DED2C08
-:10556000F827DA8BE43C0ADA8783AFFB1D14F2F9E3
-:10557000492B5B4FEF075B7C0C76FBA0F42BFAFF0B
-:105580006212BF2FA1059F0DD5AF9286093DDC1792
-:1055900021FC8B5EB77E0A707C4FB31616E34CED90
-:1055A00032E7A07FF53B2A4A4F1D2FE573BA3C5FD7
-:1055B000D906A438C0C79AD74BF710D7161CACC46D
-:1055C000BEFC40A79D7E5F55C5E18DEF8C22BD35A9
-:1055D0007DC064DACF34978595F3FA070B4C41DC34
-:1055E000DB7A80D9455C803D4CAF3545523CB2B644
-:1055F000FF177F813C4F337F7508BF5392F66F1AB8
-:10560000BD7F39AFEBF327F11B33E52C504CEFE0B6
-:10561000C5EBA66190C35D933B744EB2079CAD761B
-:105620008FD8275828FCFBEFFC4B6C82A907AEF300
-:105630009D9FD3BB82E73BED64AF1DBF5FBEB71735
-:1056400006CFF91417C545F37AA4679E7798E89DAD
-:10565000B1F1FB0FD1BB79E3D5BB7A76E3BB7ACC52
-:10566000951E0F7B32D950B95290DC28E8764D9CBC
-:10567000F19C98334C9CB7728609F9A1F0D7653F2D
-:10568000F78EAEF5ACC3E5CA7FAF7E6FAA3A827ED5
-:105690006FAA6B7FD6B7BE9FF001F407AE176CC838
-:1056A000F4160EEBD7B37FCE907851FBB059F63F8E
-:1056B00043E26786C324F011F67B1B8A3F14FD1575
-:1056C000BCEADE91A21BBBABED4DDC0BE2F42A7C05
-:1056D00088119DAE203AFDE5DD75B8E63FC0ECEDE2
-:1056E000D0DDFF123A05F10ECE65D3A92D9C4EC137
-:1056F000C8C1D0131E11BFBF151ED7C8F218ADF315
-:1057000079E628B203EAF25D70BEBEDFC4FA56EB5A
-:105710007AD0E4F642EC8FC7F8D11B70B59B5AE9FA
-:10572000FBF7878978C281AC2D55C6DF8C845ED6A5
-:1057300028DF3FEEFE1DC3C50E7A6FE47C40BD7FBF
-:105740001C787C211F77D38C02B2EB9F6772BD5708
-:1057500077BF932DDE3FEE7E27DBEC273BC99C28ED
-:10576000B2F374BF939D23DEBB7E4D63B97887D6B9
-:105770005F66A7F8F8F077B2F93EF31CFC194F54B6
-:1057800047911F4ABD8F3CDEA9D7818EE1EF233FB1
-:10579000AAF9E62C407F850EEAAF7D4ED48BDB055F
-:1057A0009A83B0E31CAB8FA177A1155F2AFBF5208C
-:1057B0007FC7E3C093BAD7F907C95F0AEFEA5E9BD8
-:1057C000C2BFE233BF95D1FD4FD001EFCAAAF7D9CE
-:1057D000B5D5526EA8FB846F785C481F8CD7D70371
-:1057E000EEC6155C6E905DBCFD0ECCF7C93B63BC8C
-:1057F00080EB98C9F8FBBD2A7D7898C9F03BA1F3EE
-:10580000E47E354FC5FDD71BE3FEC3DFD14C8CF3DF
-:105810003D328CB73FAB7D300A1FDFFD3FE65EE3D4
-:10582000489E92EB7F44B4FE24EAABFB0F4A3F7CD8
-:10583000B7F88B74FABD91AF0FD1EF2ACE75FA028B
-:10584000A817992DFC017F486DA7FB1A7F98F3D705
-:1058500074B227AF16EF7F5E2E9C97DEA715FCB0C3
-:105860006A8188374C6375C4BF293DF7342301C76B
-:10587000FF6FF7697BEEBB4E1E7E82E22E7CF47BCF
-:1058800015E1F4181B71F065173FA9FC76D897B3A2
-:10589000E83E69DCC1556E9E3FF6D239914F3B78A8
-:1058A000C1CD69D3FED27991CF3F7801F7513F7BCB
-:1058B000A953E4AF62E4CF3AF1D257B370FFB4BF5B
-:1058C0005BFF23E835F362DD9BD85E3F5A73F3023A
-:1058D00037DDA72C4BCF13F7293F41F98CE4F9EBC7
-:1058E000E2B49EFB94268FEF8FE0DBF35F09FE7638
-:1058F0007358C127FF6CAAEE932A79DB975C54EBAF
-:10590000EE5F751F56AD63B6DDB3DE0A26F4FFD336
-:10591000F7549987CFEBFF021C7874630080000076
-:10592000000000001F8B080000000000000BB57C89
-:105930000B7854D5B5F03E73E6994C9249C80B02EA
-:10594000E104420C18D299BCC05BEA1D2089015ABF
-:105950001B6CB52018068D90D76442A82DB5D80CC5
-:105960000611A8DE0B5754B06827400035E8A001A7
-:105970002718EA00922252BF98FB37F2FD5FE10B35
-:105980003E90979310B557EF55B96BADBD4FE641BB
-:1059900022DAFE7FF8DAEDDAEFBDD77BAD7D86B196
-:1059A000B196F3D18CFEAEC98C1D3FFC9EA249641A
-:1059B0006C4681D16A90A034772BC6020EBB01DE03
-:1059C0007595F935B1BC9F36B45FA2D766C17E75B7
-:1059D00066EA973908FD72B1DF9F476BB1BE416F30
-:1059E000356430F6B48EB94D098CC5688EC8B84E92
-:1059F000CC2063CDD07FAC8131631E63297AC6B0E1
-:105A00001DFA312394BB06F97AE3121A56309867CF
-:105A10005C85D9DA9C81BBF53056C858DA28FF6816
-:105A2000DC5FDA4A3DD5C7687A940633638126FF86
-:105A3000DC0F33192B8E8ACD653F8052CFB2711F98
-:105A40004C13656D85F54AE4AFBAD2006EEC906CEC
-:105A5000B0342B36946F671319ABD7029088FF339D
-:105A6000795A711D6D77F51EE8D7939C66DD08E0C5
-:105A7000D8D4832C331FC6BBCA72D804C68E5A1C16
-:105A800039D62468679B241C1F9DC3C7FFAC2C7AA2
-:105A9000870CE3FB0FDF54E880BA3B0CCA01666554
-:105AA0002CDF3B7A81F61680E39442C902B075EC94
-:105AB00002ED688053940312B41BDDA31714DF8238
-:105AC000E7335A3ECC66EC174C627180970CAD639D
-:105AD000BA15CEEB2CFB44CF34D83EA02F9F0AF74B
-:105AE0006A854960FDA4A3704FB0CF8139319E1DF6
-:105AF000703E96A314627BBA6E20D602F7D1FF9552
-:105B0000B6CC63A671B13F87FA6BF8F7AF8C3DD77F
-:105B10002953BD0AABE5375689EED795697E0CEF60
-:105B2000AF3ED568A4B2F36A29C379B4E59977C0CA
-:105B30003C763D5B529E73FDF801AB86F695B10E47
-:105B4000103A86C8CBCE14F8BF28A6C26E369DB1D7
-:105B5000965F41C5BFF0763809D34FD208F896ADAD
-:105B6000C5DAB0FE76EC1F6C6776230B8E775AA7EA
-:105B70006E5D9B29D6433C2F639E49708434D620AA
-:105B800031B8BF54E627FCBC644BA073D11FE0E9D9
-:105B9000D94453CB46A45719E8328F4A6681322D37
-:105BA0001AD683F6B4374C1EA4AB5D264EB7991AAD
-:105BB0005EEED2F0FEFA28E6463A1D073083F26D1B
-:105BC0009BE377B6249AC74FF3C8FB6D488FA39920
-:105BD00097D64F616EDA8FDA6F2CEB3621CCB40397
-:105BE00059844F5933EC7D26D9666E463A0B34D929
-:105BF000D947DA607D203A765528FEEA71BC3974BF
-:105C0000DC2C1AA78E77AED2B08F46E1E1FD443F7F
-:105C1000CE4C8DDD9383E3D89B521ED677EBCB63BE
-:105C200082E37A9B8CEC23B8D7FFD3C4A83CDD6415
-:105C3000A1F5FF6F532A957F6B52A8FE6C533695E2
-:105C40007D4D56AA7FBF693A95772D8A2940FA770C
-:105C5000F966B28F8C42CEC0FF9C5E9DA32F04EEEE
-:105C60009D393C1DBD26E8A83763F8F66E6C077CAD
-:105C7000F6DECAF1D97F3FF3ECC820BA5C6B49B8B5
-:105C80001EFF30C284E7EB8F610BBC704F6F17486B
-:105C9000347FFF680EEFB7EA683EBB866DC5F16FD3
-:105CA00017E8F9FC133455D86E4FE0F3F666010C93
-:105CB000FB59307DE6CBC897F664A8CF0BC2BD5325
-:105CC00078BB7D0CAF57F7ABB6FFCE66E17428F01A
-:105CD000DEAF83F57388DE697EB5FFD7459C0F2361
-:105CE000FB7B3235659E61EE23C1C6FB135FC07D31
-:105CF000B8910F3242F8A25E21BE50E950A5BF977D
-:105D00006CFC9E330D82CE4127D0FDA16E40F99AE6
-:105D1000027C20D1BDD8199C679724F825921FA03A
-:105D20004439AEF283CA072ABDA7019F4909C1734E
-:105D3000FC28825ED5F2B495E3A53B39E601C26B3F
-:105D4000A7CE02A210FA03221310BEB3C00EE34A7C
-:105D50001E35370C27BFE2FED97B50E5C108F7702E
-:105D6000DDF9F5BCFCBEE727F986721BE9761879E8
-:105D7000F5B53581F6A3D26D92CDFE5F483FFD9219
-:105D8000492BC54169E2741379FEB70BF83954FA0F
-:105D900079C9C6B8BEC4734EBC5EDEA9E7193AE73E
-:105DA0007246722F338AD747E2573D5788DC8BB152
-:105DB0001506EF93316E0F8C057B606346907E0372
-:105DC000495F2E43FDB5CDAAD0FEFEA09109FFAAE2
-:105DD0003E19AA97E425F373C2F40CB3001E070E14
-:105DE0001B88BFFD1A56F50A8C6B2555113CF76DC3
-:105DF000362E0F06174CD2AC827D05FE6E76A3DEE2
-:105E00000A8C19382BC1F8C0563040C87EB0FF58F4
-:105E10004A66EC7ED029A897AE809C63598CC9DB7A
-:105E20003E3F2BC1BE976D9319DA350110DB328CE2
-:105E3000733D19E331F2718CC1B83A31AE79EBA7F9
-:105E400077217D9D07FA44FBE62353FD040676CFB8
-:105E5000EC6D3ABAC765317A0FD61FDBFAC48945B3
-:105E6000009F6F9714B4374A6533B5D73C2F7B70CA
-:105E70009D3A73E94509EC9C407BCB535150EFDCD4
-:105E8000AB63261857DA2E59FD30FF726F0CDE0C0B
-:105E90005BB645F77E5F76506EDE26F458D52EC988
-:105EA0000314C3AAB687B7D7EC0A87EB983608C3A2
-:105EB000FCB36C318964FF4D6636B4FFD896045448
-:105EC0005643723B92AE506D237EEC8D5C1E33F6D2
-:105ED00059F21D4097F2E1CFD3DF377378BE80CF00
-:105EE00001FCC9E7FCFED57BAB1732FF93D1ACC0F8
-:105EF0000BE7AC3F6CB2B8E160F51D329D23E08D3D
-:105F0000A37B7645F5DD4E7C7A48B6A01DB6C12749
-:105F1000BBB1DDD969DAA98173D61F9018DA9F4E1B
-:105F20009FC1C3EFE9EA326C5FEE3359146C3F64F2
-:105F300060328C0F00DE4C88C7717D847FC42BDA01
-:105F4000A7F0F763A928887F19F19518C457F3566D
-:105F5000BE9FF37B397E4AE5D55AC2578BC4524265
-:105F6000F0FC67CD8B43F8C27EB3B7FDB50BF1BC37
-:105F70000CF6675010EF32E1F93CE007E7D51FFE61
-:105F800028BDCF1CC4B70CF8FEAD3A1EFA2FBF01D6
-:105F9000BEAB987B1DDA73DF17CF69C8FF4964F782
-:105FA0009EFF03DABD31608F23E908FB38A9B6F7FD
-:105FB00078222C589170D9B902EA27A5BEC232C105
-:105FC0004E90E21D8F225F9F9DF39747101D3D73FA
-:105FD0005FB4215D34EBFA5A9F860A777CB4157959
-:105FE000B03F63FEF6D7609DE2842FD3F723BFFC5A
-:105FF000C96041727A42F023FE1901FF4EC6EF1BC1
-:10600000F0780ECFEFEC34F80D708FACBDC43E6469
-:106010000F4C407DECD5A39C2AD10F54AC407B1C87
-:10602000E6C375242023E4EBDACE3F9F96609CA460
-:1060300024B2C5081BCD7E19E769D35D193A37CC68
-:106040002359FE42FDDA6C13E8FC13537EA4A0FC36
-:10605000695EC81C5113BF4DCE3392F3CF0A7F65E2
-:1060600044FB6F0479AFDA7DCC3D361EF90BEF822D
-:10607000F30F973BCBA733F127F842C0556BDCB148
-:1060800046E8BCFC666B2A9EFF63A4B358A4BF53CA
-:10609000DA51B0AFBA5689F0568FF483FE15EA375D
-:1060A000A8EFF70A39F27C77F1A8442C252B702A47
-:1060B000ABEE94AD7E68AFF6717ABA8E6E84FCA8B2
-:1060C00069E3F2E33A3A6A0338C44EAB47BA526125
-:1060D000C0F7C9A0FC987A0DF6FBF23426F4955B64
-:1060E000D05B4E5C1FD0CB2053E22C39217A4BE29F
-:1060F000F6962A576EDA0AA23E64DDC91E23D386BD
-:10610000AC7BF35E4B183CD59B1AD6FF073E25AC03
-:10611000DDE6CF0E6BCF3F610D830BBBA787F59FED
-:1061200076DA1E06DFD25716D6FF8717CAC3E0C13C
-:106130001C38CF3076C7901E4A95C2FACF514C61B9
-:10614000F3CFCB8E0F8307CDE27E841DA8DAA75F45
-:10615000D8B81D1459AAF7FB136BF83AAA5FFCD301
-:10616000E9E1EBCDB787AFF75DF1B21BEC7E2DD83F
-:10617000F57B413F62F902D8FF5AB0EBDBC0FE4726
-:10618000F825B0FFB1F482FD8FF5AF80FD8F703B35
-:10619000D8FF081F047F05615F531995879ACAA924
-:1061A000FE46F7D725D63D21D63D29D6FD47EF49F6
-:1061B0002D9D6593345F009FCE4CB8A847396C6F16
-:1061C000EC2BC538C0C05B32DB810CE2F09C684A26
-:1061D000447D348AA1DDC2CA07DEC63845FD818907
-:1061E000968D0AEAA1FF7C07DB03EDB282F2FCA8E0
-:1061F000EF83589CE7CA17C087F938EE8358F48FAD
-:10620000EBBE64046F847605E039FB4130903D03BA
-:10621000720DFB67AAB047CFA02C6FDBAF477CD4D1
-:10622000EEDD4FED6F7975E1ED7B5BC2DA2DD81FA6
-:10623000CA5AAD87FCFB4B3E753E3FF5AFCB94ECA5
-:1062400068175FDAFB9FC9CBB05FDBBBC9F77DCBBB
-:106250007D7F72F0C51C94EB4ED0C37E73701E67B9
-:10626000874EC07CDF7599FB4B135011B4496C12FB
-:106270001457D826B60AE45DADAFB50EE5506DF6FD
-:10628000221DCB207924E20D206DD15E42E71EEE67
-:10629000EF8AF7D3D8FB60DE37BCC76FB723FE3A6F
-:1062A0008FC5E2BAFDED72983F73771EB75BEFCEF4
-:1062B000D313DEAEB41F8B55A07D83F718BF6FAD2F
-:1062C0009FCE7D54C0FD50D23DFB643A77F5171A3E
-:1062D000BA7F75BEFBF3649A678E6F520C9EABC794
-:1062E000CBD773E529B4CE9CCCA595B8FF93A90B69
-:1062F0000B65B2F34030A35C9D32AF15E303B55E8E
-:10630000D93E9CBFB546CCDBA5E374F856E6AB5D41
-:1063100063803E4E968DB291CC17FD7E93C7EDF112
-:1063200052BD2313F5428F5989413A7EB86C620CF5
-:10633000E2F52896585FB653EF80B2A69DAFD763BB
-:10634000E98E457AEB69CF97D16E51E75B89EB1601
-:1063500086D0F510DEDC84A72A4F8B19E709E28F7F
-:10636000D7BBF2B81D7ED2F3EE5D68A7F464475B3D
-:10637000112F5D7A46FE6D2DE015F5414F675A0BE2
-:10638000DE83BA9E4BE0A33F5B43780DF874A2DF37
-:10639000A25616D64FC7F1B52B7C3F16CFB97F5BFF
-:1063A000847AE959B0ABA1BA4ED7908CE7FF787BDD
-:1063B000F8FEAAC43DD7E9FCC9C921F45AD731C4B3
-:1063C0002F66A2EF0E953F14C2A78AC79E6C6EB7C8
-:1063D000F5A41A3CE82FD6ED6F25BABE3EBED39D7C
-:1063E00081767EDAAF8D1437BC913FABDA01217E26
-:1063F0000F433F4E5736B1503321A8EFAFD9EC2FA2
-:10640000E615A23F544EFE5E0F1B5886CADF897602
-:10641000701CCADDBF3D85EB0EB683BD07EB3A8D20
-:10642000BEB91F829D35680546817D0F6ED7798480
-:106430007F6246FB7499B04F3F561C4532E857E7E0
-:106440001A0D9DAF2E278ADBB5424E7EB23FE3A7E1
-:1064500048AF7527648B11ED50F05B086EE3764111
-:10646000BD37E3DF67A0BDDDA6233B40B53B9CC243
-:10647000EE382FECD9F36B06F464AF1E96D813B048
-:106480008F2ADFE6AE346877E6CC257BD529B75175
-:10649000FC71F9D670BBA0DA130ED7EE0D879D11F3
-:1064A0007683EAB7F5E40DD90F93D1FF289167A45D
-:1064B000201F7C2CF0A9FA232BA75A5390DF3768B2
-:1064C00095B96A3C00EFC975F8D56ADCAFA72ECA4A
-:1064D0004A7EC1AA43749FFD9F71BFA33F9571FB84
-:1064E00088F17BEDF771FA76E924EE6700B9D27C8A
-:1064F00046C9B3069AFADD83B12497182B437E6808
-:106500005CC8FD483BC65CA1DC9727E24511FAF266
-:10651000566D9F1C1F221F3ECB9B40FB2FD633077F
-:10652000EAA9953156D25BE38DDCDE2E59EDB5211B
-:106530001D8C07FFD81012CF1E6F1E90B0DFAE87E4
-:1065400078FC5CF5EFE76B2DBAF810BD0792276C6D
-:106550007E90247CFC8DE6B7C0FCE6E0FC70DF7129
-:1065600078DF9F1658491FA7CF67AC9BF8B181F819
-:10657000513DCF15A0B362A0338C9920DEEAB61F3F
-:10658000A138B09375933F521ACBF7518AFB41382B
-:106590008A97967C2E37CAF3F9BD350B58955B6FF9
-:1065A000E5DBE3F3A1DC9BEF48CAA77A0BD1E54A10
-:1065B000412B60A7A4F40D23771BFFC2FDAA4F81D6
-:1065C0000F90CFEF699094CC303B88D3B78B57B105
-:1065D000CBCCDB3B03EFC16DEFCE4E463F8AF3D50C
-:1065E0009255262533844E5D48E7702F5596EA1F55
-:1065F000A3DDED5895AC60BCDF85743F01AF91D34E
-:106600007522FC43FFE23A3AF786C3F0B71DE9ABC7
-:106610009E19ACA8475CBEC876AB16E33AF9F9C040
-:10662000073707F9205DD0658B43F2A0DC6FF94A8C
-:10663000CBE3588B258A5BDD09954897F487FDAA43
-:10664000667A70FE3B01447F886D4924BEA1469066
-:10665000233F17E7BD53EB3F827C7C5CE7CDC078DE
-:10666000CA7127CFEB2C646070807C59CCBAA9EC3E
-:106670008DAE3FE0A7C9DDE3D06F7ECF61A0384E7D
-:10668000CBDA1D31284F73D95ACBF96C54EE6CEF2D
-:10669000B5FC91ED0A2024765EC50BC5853611FE4A
-:1066A00055BCEECDB7CF47FC8F34BEF6AF076E4773
-:1066B00097A2F681567D0A279BEEECA220FE5CCCC9
-:1066C0009B8DFB55F135843FD8F358B887056CA0F6
-:1066D00008FD1A156F46F8371CDED4FB4CD70DFCAD
-:1066E0000CAF0CF412C997487CAAF75BCF1A743C24
-:1066F000CED5F0CE42E87FF75A8D82F6E175F8BD2F
-:10670000011EFC26DEE48F91C8DF1C092F2A3E54AF
-:10671000FC9C8EE7E34EDF23539CEEFF355EDECA22
-:10672000773CFA6DFC18C97F23F1DB9255117C1977
-:10673000C17F2ABE1CAB6289CF543CD6298CFCD6C3
-:10674000BACE18AB8705F167867F883FCC53503CA3
-:10675000A65D62CF48DF850FFB28AF11891FA00D12
-:106760003BCAF59D11FCA7E26D24F9A3CAAF33CC57
-:106770007FDC22517E80F3E7AF0C1ECC2FAAF901FB
-:10678000350F704CC8BFC8F20CD81D9877D998DD6A
-:106790009384F65AAF5E9D87E71FCFACE91EB70220
-:1067A000C69F99C9CB5EB4D342607B148FC39D1939
-:1067B0006D70E3BD9D9126CF423D7E46FAF5ED1CFE
-:1067C0004ED12B082F4C996501B857A7C6ED1E1660
-:1067D00072D843E59985D38AA99FC4DEC4FB5024AF
-:1067E000564EEB48524219ECE7CC0393F29A59F01B
-:1067F000FCAFE4737BD62BE4F9501CFB3712C5B118
-:1068000097800AB060BC7DD6D36513A0FEEC8313DD
-:106810006D94FF6B0C5F1FF56806C50737D37CB717
-:106820007E31A05B9A13DCD790FE2BBECAEB2B27E0
-:10683000913F512570684F98CCFD58CFC438D4474C
-:10684000AA7E1A3CF1AA39347E7911F417D387C095
-:10685000931F4F0FD56F4776FF3E0BE7A9D2BB734F
-:10686000AD507FA1E50FE9680754ED7E348BECD283
-:10687000DD1BB2D0BFA8DAF1FB2C3BC1D10EF26F09
-:10688000B4FCDC97F7DDB27363881DFC6021F70B65
-:10689000161B8F94A07D3AF7E64F1EC178F8A40727
-:1068A000258A8BDDC3BA1F41BD5991CDF9886D3161
-:1068B000925C87F928EFD83AF927BB509E9FCCFE0F
-:1068C000405709FD4C055ABA8F0AE6792C05E36159
-:1068D000EB258A8705FB8FA33CE6D2B5923E3511A6
-:1068E000F561BC4D56705C3CEDE3DEF5B62EACAF09
-:1068F00058CDEBE71A3CED3D38CFD37A6BAB821322
-:10690000954F280FC90B9B0AB8DFB5E43189EC71AC
-:10691000759D494F25B7849ED35420F4F98C6EE2BF
-:10692000FF9F0ABCFC78F5BB6FA62A984F72C4156E
-:1069300040FB3B4F9ECF44F9559C703107E97C9258
-:10694000DEF14C359E7B8781E28705B969720AF4D6
-:10695000CFFBE5CC27B05CB27AE933D51807DD6A06
-:10696000243F4ADD5FA3A468D0DF3CD6F28B7BF1E5
-:10697000DE2E3C69243BBAB1E5A614360C9FAAE58D
-:106980001EC0BF92C5D8F34D462A5F6CB230058E4B
-:10699000B8AF2995E0979B142AD9024E5F8DC25F4C
-:1069A0001D69BE7CF0F715905705EB613EB0376D61
-:1069B00026FB143CE7A429CE1D1BC4B926C1789B35
-:1069C0003B6336DE43C186155D688A2617F0FCE21C
-:1069D000DB3DEBD3C98E5E7DEEB96A685F5A509E8F
-:1069E0005F00F76DDC7E95FCFC631D8F56505C7F6D
-:1069F00087819F4F9CFBC2935929CF60DCF52D1DE9
-:106A0000F9DFAEEDE79EDB00E57D8FADD087D2FBF1
-:106A1000773DAF4DECE7467C35D23D7C7FBEFA7DBD
-:106A20003AF1CF0EE0AB9C7F9CAF5CABD7D0FD3D85
-:106A30005A507E37DEFB059D3B1DF9E9C2E41F116C
-:106A40009DBB0F4B74FFAA1C57C72F10E7ADD5781D
-:106A50001F237B50C8F1CFC1F3C3FB3DD2F17116A8
-:106A6000DAC39FFB167EEBB90F3661061DE35A466B
-:106A70002A23DB8BF48E8956385F9186DBC191ED3A
-:106A80000F17A871719E6FC73F8C0BD709FDE98462
-:106A90008DC525A0FE93FC51B998E7B8EDA216FD6F
-:106AA0002FF0EBDE0FB72FD9FB217A7CA4FDDEA8F7
-:106AB000ACC779B441B93BEDB486F943F4F62D7D0A
-:106AC00051CC1FB2EE90DF01757ACCB3748C26B92D
-:106AD0008078C3BC4CA063F20E842FEA391E0307F2
-:106AE000C1BFE27115261705CF79B1E3722ECAD95D
-:106AF000C8F3D61FBA4CF451E77BF4AA44E79F735E
-:106B0000519B7BE3F31FD97D3917F17751D7578418
-:106B10007E5440DF978B78A87F9DCBF3EF7B0F6A85
-:106B20007DF57A3D8FEF4916F2074BE42BE4C7075A
-:106B30004E703FBEBE6327C9D3C14E1E4F7169BAA6
-:106B40004B5330FED070AE0BE5D9602AF7AF607EB4
-:106B50003BDEDB8C89420F6A07D2E7835C3B2AF27B
-:106B6000B5AA5F7701F9578FF378EBE83D526E34A1
-:106B700043BBE212F233D457ACCA5887747EC19338
-:106B8000849120F676EEFFD453FCED8D688B4C7625
-:106B90002BD486E06FE81C1E993F9C61AA9F1ECDF6
-:106BA000EC21FD5C7AE5A7E41F9FE47932D714CE8F
-:106BB0004FEC10E727E7DA23FAD490F95E52E58725
-:106BC000B01FE7BEF13FC497A76CF65328CFA25180
-:106BD00016E27CA9711E4912FD8A82794073A7F0E2
-:106BE000C7CB646A77F964361AC7A4C650BEBE8C98
-:106BF0006DD2A2BD3B977967F077327DFFF643688F
-:106C00009FF7869C8FEFB1C07EA6FC71699423B379
-:106C100011ED238D24EED55B303F549F15727B6BB5
-:106C2000862C911E1B181D4D76CA9C05CEC5B85FDB
-:106C3000B55F9996EB339887EC2CE619C8C57C268E
-:106C4000F30FE4629E53ED77D71BD10DA41799B7CC
-:106C5000E0AE9075C61472BDF929E69F419EB84416
-:106C6000FEB344FEEA29F4A31A0FF33C61AF26E316
-:106C70003D7CAFE5867B46BC5E06BCDA51FF3898AA
-:106C8000DD8EFC3335C983FCE3DA27317CB756DF70
-:106C900061D881719D7A5D5F32D2F306DF5FF5487E
-:106CA000CFAE03EFEA95A9389EC781C05ED7E0FD5D
-:106CB000BA84FE72FA6E7A0FE36ECE135C8B3AB52D
-:106CC000EF925F5FDBBE9FFCF73AE627FFBDAE2D7C
-:106CD0009C5E0653799C3D923FC6142A617C3167C5
-:106CE0002BE78BBB64D680728E89B8E99CD414B232
-:106CF0004782E3849D285F7E04ED97FE09925582CA
-:106D0000A9FAA3DC6BD12E7267717BA6FF4F2F16F9
-:106D10002C23B9E229F819BE8B11F6EE9CF59BB530
-:106D200072C87EE674F238617F14AB3A48F8768C0C
-:106D3000453CA4E7958F2DE4EF6472E99D8F86C7EB
-:106D40003523CFF1AC88E39CC4384F4E70DFF3D2CB
-:106D5000D2B81C631EA29F2E0D5F5F7DF7A28E5FCF
-:106D600021E869C81F92787C6A24B98279944A9193
-:106D700047A91479944A9147A91479944A9147A94B
-:106D80001479944A9147A91479944A9147A914799E
-:106D900014AC3F895BA5F7703B9F417AE8421E1B0C
-:106DA00013847B1322E031E1FD7B13A470788C44C3
-:106DB000FD8B0B773EE3CEC138A645C8252506EDF1
-:106DC000AF0B261E5FEA8871CC2D84FACA39CDBB81
-:106DD000F97B443BBD67294E58B818F96B30D1C0D8
-:106DE000500EB90B1DF3111F274ECCCEDC4CF2D147
-:106DF00064C53C77EFDD37C7515CEE2D99C9B0E42F
-:106E0000CCECFCB50500CF344B44B720277E50AE08
-:106E1000FA9330CFEC4E9ECF2891EB2A71FEC6D16B
-:106E2000A67C8A6BE53B161586C40F4AC72CCF4457
-:106E30003BA84BA7BC87F154F75F740CFD2835FEC7
-:106E4000A6F6EBCD9B598DFB9A933D716D1ECA1B27
-:106E5000602E946F763D6BC37DD935D15233C92BEB
-:106E6000458BFC5F2DF03D4BE1F6B05FAF6813D072
-:106E70006F8F9A99E85678BEAA52E4AB2A45BE0AAB
-:106E8000F1730AE36650BE03F55876433D9691EFE1
-:106E9000B9761794AF24BA6503E9A1EFC1E6225F82
-:106EA0007139938EF4FC8288C367178A7769F9E594
-:106EB0000FF2715E9AA756C4DF2EEBC2F378EAB8E0
-:106EC000E07846E51D3FE0F299C5E9F97BD7B1CC02
-:106ED0008DEF69EF786D34C593021E8D5B17073017
-:106EE000F038CA2FF61AF76F592AE7973B5E4DA183
-:106EF0007ECD220EEA4CE8CE4A40BD2BF84A850FE3
-:106F00007EC3DFF938F30086F275899FCF79477722
-:106F1000563CC001C9A4C1F8B873076FEF117CE7F4
-:106F20009C20E613E761466F3AE2A3FFF06BE9F7B6
-:106F300002BCD1EC5FC6E5BD3F8BE434F367E17B77
-:106F4000A1CB92F72CBEB7FDF5C17F5984EF6B2F13
-:106F5000EBBCCF21FCDB8333382CED3F6B096D4F4D
-:106F6000F2A6E37BDC5F1FFCE1227C9F7B3969FF9B
-:106F700073F1D61058F7CA596CD73F3C635131F4BE
-:106F80009F67F09C6842BA7999D39769DF81F3785B
-:106F90003FB51DDC5E9FB5EFC09557501F1F88A100
-:106FA0007CBDAF3083EEBBB963CF63486F81FD3AE0
-:106FB000E2838D6D7F7DEEB7D4CF40619479066F0B
-:106FC00001865CDC457FBB1BF7352FDAFB19C29BC2
-:106FD0008B6EA37DCE1BC5F9F9A9A2B98B903F0397
-:106FE00007F6FD0AF96F5E1C18B2B89F174D849F13
-:106FF0009A572717631C2010D35D81F3D7BF60B069
-:10700000229DD6BC9A320BE302C70B797CBA7ACAAE
-:10701000A674D4AF9A43CFEFFE2DC6295F30517EC0
-:10702000C695C0EDBB1AB9A56805E16FE76E7C3760
-:107030001278DE4479D26A9803D7ABDE3D89E2EA62
-:10704000AF7FFD4105E2A144DEBE1BEB3FDB65D215
-:10705000E03DF4E8ED713F423EECD1919F592DE0C7
-:10706000EADE517C3FD17DA584BFC44DE9A85F6BAA
-:1070700046FDE676DCF73C79D373E8E7B03D06CA17
-:10708000155C7C1EEE0DC65D6CD5D12BD5C0F331E1
-:107090005AA497CBD2A68A6770FE56DEEFB2691368
-:1070A000DDA7BBF52686EB413F86F2EAB2B439ACE8
-:1070B000FE62EB9E5CF4432FBD308FFC5195CE55A4
-:1070C0007EA9D96508D387240992C57B0952B36E7E
-:1070D00066063D5B2DC04B07B7059E61C1F197DA8F
-:1070E000747E3DDC51B581ADC5F7C12A3FD4A4DD26
-:1070F0005686E7ABD1B464A1BD529DDF57817C7148
-:10710000D1C48CA9F88E4EE8AB9AF635F3D1EE1DBA
-:10711000693FB1E25DDFE7820F3FF7993CA1F9C11A
-:10712000C8F26F4D4C3915F26EF89E0603D9EEEA9F
-:107130007C6FEBBD75E89FD52770F97116FAB781A2
-:107140001C331771B9B76455787FA988BF4BACD78A
-:10715000F765A1DE53E7FFA650956B7D5928AF2256
-:10716000C7CD9385BC7951227953D32E9D93E19E4F
-:107170006A8C6E0FBEDFA94167929F537B4DE2E39D
-:10718000528BC4BDC3D8A78B3268DD9A3693DD0419
-:10719000E36AA3FA62D11EAA8BE98B453B277048AC
-:1071A000663B04BA1293057E26089485C41DABBDC8
-:1071B0003ABB2977183CA3DD84EF73F0BF61FDB6BD
-:1071C00022CE2755BE685A8F59FA8A904EABB687A1
-:1071D0008FC3735942F82FE0DB991CEA8FDBC4BEE2
-:1071E000FBA573C427FD5FBF9F8E78AFD1B0B59864
-:1071F00047BC24F1EF1E00A6EF1E2E897C64CDDF74
-:10720000CD51482F973EAF23BE0D487D24D7CE1CCD
-:107210005C407229A0EB23B9D6535441F22110DF10
-:10722000578172EACCC17ADE3EBAAF4281F64E8413
-:10723000B17D1C237D7FB9E801921FF364FEBE81FE
-:10724000EDD459781C687D6F13F9153A25D4EFBE3B
-:1072500052A4E66DF4C173CB41BE0930655F3BF2C9
-:10726000619599E239603FB5BD8276DEC2642BC676
-:10727000C5AB701CA7037D68FE2F31E1CB65889FED
-:1072800045718E3B8B308F9DD347FE035035D9E936
-:10729000F57F32901FD9AF1BD88D722A37CEB1B08F
-:1072A00008F651A7EF5E87A1A72BBABE2ECCFBCD67
-:1072B00095B93C627B385D057276F2EF2444FEB0EE
-:1072C000BA88CB5FD05BAC05E942E2F83DE67BF5DE
-:1072D00014CA9540F74492C7917C73D1F7442CCAE5
-:1072E00087D3A0C7DD217EFEE9A57B284FBF00DF45
-:1072F000654079EFDA707A18FCEA67E4EFB1C742CB
-:10730000EA910EB784C3917484F4E80F933B6EA2A4
-:107310009B3D82AF6A6775D7E33D0CC177002C8730
-:10732000C04723E088FEAC9CDB097BF0BF61DEBA7E
-:1073300071FE5EF2CFF7F177B1CDA0BF083E104DE0
-:107340007963CD3ED04F895C3FA15EA88DEDA6B894
-:1073500054E08081F2230F777C4CEF19810E29FED7
-:1073600052DBF15A32FAED3EF41392480F26D33B2A
-:1073700095031DC9E86FA8F5751A6F96788F4F763B
-:10738000BA5AEF94FD59B8FF5AA93B17DB7D851611
-:10739000D11F60196146E7A89338BFB30E99E4790D
-:1073A00024DEF60A7A05B9904BEF2C0EF1B8802A4C
-:1073B00007AA853C398AF5399CEF2D6A5E49C2F7E8
-:1073C00072D1C3CA879B8A547BB881E236BB8A14C8
-:1073D0007EAF623CCDCBE34AD45EFFFAE5DC0939EF
-:1073E000384E11E342E4D0C4A05C41FE4F25FE7F3D
-:1073F00058970CE7AA794EB236A39C5ABCA614BA89
-:10740000B3E5DA15A5142F13EF3F23F7154947F617
-:10741000228EDF1A4D7C4962C87C97C05D4FCD2318
-:107420003943EFE8EF4F7CBC14E313BF58BC99E835
-:107430007948DF84F2399E673B97E3C836D734D763
-:10744000D3F1F286967529C3EC23729FD58E96D21E
-:1074500064E5FA7A75BF974CEAFE66E99242EF61FD
-:10746000C19AD22428971BFFD17BE0E7BDD461F0FD
-:10747000A35EAD5EBC625DDC3074739D3ED81EA21F
-:10748000BF26207E3D94D71869FF91659DE4EFC526
-:10749000381103BE6A25FE027E09D10B6542BF0E7C
-:1074A000C51BAA968E47BF9339968E473D037C55E0
-:1074B000611DC6AFC42F4B34F476C34D65E47E3EE8
-:1074C0002BE271D2B222CE2FA76CF66F50BE8EF493
-:1074D000BD85619AF4ADDF5BA46906DF417E4B4B4D
-:1074E0008E51300F54323B9AF73B6CB260DCA6FFF2
-:1074F000F09714D7ED7FC4BC80E70BCC6C34B47725
-:10750000A54EDD11AA473CD3385F461770BBC59521
-:10751000ADFBF6B8504ECC505C88EC869C68CA93A4
-:10752000047C9F92DEEAEF2CB4603E23D00DDE2176
-:10753000F093EBEBFF4A46FD1AE8FC88DE8305BEBC
-:10754000FA98DE896D10EFF48EFAC43BAB6E258697
-:10755000BE8B2BFBA014FB6D1465303EC0E35A6A52
-:10756000A9FAFF21FEEF946985C3FABF090E73687B
-:107570005C4049192E8E121A17C8D4F2B80096181A
-:1075800017C8CCE4710184312E8025C605B01EE3F6
-:107590000208635C00618C0B208C71012C312E8001
-:1075A000F59F89EF1FFA4130F178A599E4FA4A7CFA
-:1075B000DF0EF7B7F230CF3BAD6C95297F8BDF3F05
-:1075C000A07EBBEEDD4CBB7837E3DD4C793CD701C8
-:1075D000D98A2872E9068E631CC7B55FB2AE41B97D
-:1075E000D2B480D6DFD059F8DE62AC6FD559350AF7
-:1075F000D111C7638B44EFF46B3A5B29EE549C7254
-:10760000584FF56D12C338E95D06EEE73A65A8CD2F
-:10761000A33C28D9C14E4337F91FB57B25A532F4C9
-:107620009DC6F4AB2407D47CF232DEC49C5E935238
-:1076300039CC3B90A177E7E2DDF432CC33E37B71C8
-:10764000F92B7AD7EF04877414D2E156FEFED902E3
-:10765000FF88DF23DE35D574EE5F87EFA122F3CDFF
-:1076600043DFD345E49DEBA789BCB28D7F5F51F624
-:1076700064E5BE03B0DEE02603D91BEE42C703D3A8
-:107680009230EF6FA7F8C8F1C326F28B3EDC7C5333
-:10769000587C84E53B1E9C46F9F9B114AF68D44987
-:1076A000A48F67974D4CC17B9C7D42477AA737AF2B
-:1076B0007C35F66B9CAA503CAAC4C01EA079C47B42
-:1076C00029151F25CD924703F05266A577F64BE0AA
-:1076D0009A305ED9AF33AFC7774D4B187FE7A0D252
-:1076E0004DE36689E8060304789F15E23E9774FE31
-:1076F000F94B7CC7709F81DBAD691A9EBF4EDBC81A
-:10770000DF33DCCF1C7AD4B3CB91BA64D28F7FEA5B
-:10771000837A47F4D8746E972B2938FFD2933A7A3C
-:107720006F5B92F2932C07E9E9627AC720F917C9D7
-:10773000D76E1E997F22DF311CD771B902F748FE40
-:107740005017D225C5651C549E6CAAA2F277E27B25
-:1077500088EBDFFF0F9C453F312D25C68A726EC432
-:10776000EFDDA2BEFD7BAF17C4FBB5344D4FBE822B
-:10777000F7F177B315EF437D2778CA56BE1FF16442
-:107780008F656E0B7D0F061210EEB5140F22615C33
-:10779000DB6BC7EF8E060E4B167A977C9D7CDCFC6C
-:1077A00008BE1371654A1649C1F8F7A69264D877E6
-:1077B000E9840CDAB7CBC7E3A37443C9183FE7F8F1
-:1077C0004ACF731C9B5618AC9F27F82600FD399DA5
-:1077D000FCD083F4F61DE2A6BBB0BF9B99E87B6AA0
-:1077E000FA83FDCCBB791CC54F55BA196C4BD981B6
-:1077F00074F39E90FB8B17BFAB43FDDF9BEFE8C19B
-:107800007D54545E7D2499CE377CFC4A7DA71E1999
-:10781000BF0A959FFF3FDEA79F6A6AA0F29DA6550B
-:10782000547637B9A93D44FE5F1A41FE47C63FAFC3
-:10783000227F47C63F99518923FD09FCCDE3CD1135
-:10784000F1CEB251F7AE87FB9BBD456FC52A35FE21
-:1078500089EF87579A491EFCF7B461E39EEABD9908
-:10786000294E3AC84C7978FFB3B2276A35D0AE9D1D
-:10787000CEF1A7C61D913FF07CC81F58227F68B586
-:1078800041FE78560F2C5CC0F5BC9BF4BC89F0BA65
-:107890006E0DC80F80EF639630F97125427E80C36C
-:1078A00071377D57D56960182754DF51CE82E28B3E
-:1078B000BC61E48997CB937151DEE7E97BFFFA283D
-:1078C0007A9F7B5CBC873BBE81BF87AB64E5B4EE2F
-:1078D00030722516F171DFA881B37F80FEF7FDDEDF
-:1078E0004CF6CABAD1CB8AFE19B9724D7CD7F234A4
-:1078F000FEAE80F6DB7E57E03109F3A18DF7301B39
-:10790000E259FD5D811491CFFE1EBF2B306D7AE1EF
-:1079100077FF5D815BA78F5F1CFABB02B7FA323835
-:10792000ACFEAE001BBF7884DF15983D3DE9FADF61
-:1079300015B86D3AF71747FA5D01B027CB705C9226
-:10794000CD3E07CB34B1CFC8EF694F8AFC5D97C6F7
-:10795000B118CBD258B796EA359E02FA0E5EE3FD17
-:1079600025F981F98E9FE3794B9FB04DC90638CD3B
-:10797000E02539D99B67BF13EBAFD9EC77E13A919A
-:107980007173C42DFAF7B09FBBB13DF2DD958ACF7C
-:1079900015D3B9DC6814E58CE6E1BF276F9CCEF304
-:1079A000F237DA37ECB706D71BDAFFA6A505B81F02
-:1079B000D86F2DD6C37EEBB064E684B0EF53AFA78B
-:1079C0003337D155E3744E5F20CFE67DC8ED412AB1
-:1079D000B3B49E78B41FC73CE489C7FD8E691930E3
-:1079E000E177107F740F9850BFFF71F58009EBFFAE
-:1079F00068E7EF9523E77F793AF703B2660CD0F892
-:107A0000F168E3937D3E108FF65356D587EB28DF60
-:107A1000B27732E997F142BF8C7F6882AF0FE86D91
-:107A2000FCB638CA67B3E2446AAF31723EAD79A89A
-:107A3000F2E00185BEDB9AF76188BD33D903FB0E06
-:107A4000B3BFB483FCDD25C0784F7B750423CDA282
-:107A50007DE564FCDDE5182137D04E5B0C72C15921
-:107A6000F5E69794F7C7F1381FE66891FE7CBA41B6
-:107A7000F17D9A05FDD0E50BD674915FB875A85ECF
-:107A8000F899FBD7A1DF0CF65B587D4DE5912ED41C
-:107A900037B57BC3EB9D0D57C97F05FB2DACFE9E13
-:107AA0005F9ED3F3DF2F08AF07FCEE45BA54F17B9E
-:107AB0005CE79D8C7EDE71679495BFDFF7D2EF9512
-:107AC000EC10DF3FEFFC8F599C6E04BE61BC377435
-:107AD000FCC8F4D14CFDDDB35836F2C38D4A552EA7
-:107AE0000DFDFE899EB929BE373786E48E4BF855C9
-:107AF000F59516D2F369F546925F25729415E1A1CA
-:107B0000DF3F2993859CF212FFF7DC1E4F713C3A50
-:107B100000C2095329EF93DCCCE1812403C9871209
-:107B20004D79DD1E28DFD4847FC7FE2CCA0719F9E2
-:107B3000977F87E9D27BF977E25AA510FDDC66C909
-:107B4000BE0DBF7B6C96441CB1DA4CF9827E8C2F43
-:107B5000C279B6C47BB62D8375B6DC9943F6713F06
-:107B6000E3F2D4BD80E7ADB6C4972F5E81ED0BA7DD
-:107B700050FBC16F263E5E80F653759415EDA72D20
-:107B8000366E5F6F999F4DEDAF4BCA1A3CB7FB2124
-:107B900046EB6C99CFCFBDE5F171E2FB0B8F09F994
-:107BA000794B8B7D34E6A366591C17105F63443E06
-:107BB0006E4B06D443F99454BEF07E9C672ADFEFE7
-:107BC000EF6C0AC98FE30BA73CBE5B2135E2C7BC53
-:107BD000906B6E0CF9C1FF0BB81F749470470000D6
-:107BE0000000000000000000050207000000000087
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
deleted file mode 100644
index 280bbcf..0000000
--- a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
+++ /dev/null
@@ -1,12847 +0,0 @@
-:1000000000003BE8000000600000068800003C5053
-:1000100000001968000042E0000000AC00005C50E5
-:1000200000008DE400005D00000000EC0000EAE844
-:100030000000E3000000EBD8000000940001CEE0D7
-:10004000000058E80001CF78000000C400022868D2
-:100050000000F9700002293000000004000322A80B
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC000000000718040000A900004B
-:10061000081807C800070223071C00002C2100004F
-:10062000071C800038930B09071D0000292B192E89
-:10063000081D685052F60225011800000000000055
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000003B3041A1ECC0001022711
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1ED000000000061A1ED800000006E3
-:1007F000061A36E800000004061A36E0000000027F
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002041A404000020228F4
-:10085000061A400000000002061A400800000002CC
-:10086000041A62C00020022A061AD1000000000209
-:10087000061A200000000124061AB000000000281B
-:10088000061AB1400000000C061A330000000014E4
-:10089000061A33A000000068061A81080000000252
-:1008A000061AD1C800000002061AD1D800000020A4
-:1008B000061A249000000124061AB0A000000028A7
-:1008C000061AB1700000000C061A33500000001424
-:1008D000061A354000000068061A81100000000268
-:1008E000061AD1D000000002061AD25800000020DB
-:1008F000021A292000000000061A30000000000241
-:10090000041A30080005024A061A301C00000009CB
-:10091000061A320000000008061A5000000000020B
-:10092000061A508000000012061A40000000000263
-:10093000061AD0C000000002021A2924000000009C
-:10094000061A304000000002041A30480005024F29
-:10095000061A305C00000009061A32200000000868
-:10096000061A501000000002061A50C800000012BB
-:10097000061A400800000002061AD0C80000000253
-:10098000021A292800000000061A30800000000228
-:10099000041A308800050254061A309C0000000931
-:1009A000061A324000000008061A5020000000021B
-:1009B000061A511000000012041A401000020259D9
-:1009C000061AD0D000000002021A292C00000000F4
-:1009D000061A30C000000002041A30C80005025B8D
-:1009E000061A30DC00000009061A32600000000818
-:1009F000061A503000000002061A5158000000127A
-:100A0000041A401800020260061AD0D80000000242
-:100A1000021A293000000000061A3100000000020E
-:100A2000041A310800050262061A311C0000000990
-:100A3000061A328000000008061A5040000000022A
-:100A4000061A51A000000012041A4020000202679A
-:100A5000061AD0E000000002021A2934000000004B
-:100A6000061A314000000002041A314800050269EC
-:100A7000061A315C00000009061A32A000000008C6
-:100A8000061A505000000002061A51E80000001239
-:100A9000041A40280002026E061AD0E80000000284
-:100AA000021A293800000000061A318000000002F6
-:100AB000041A318800050270061A319C00000009F2
-:100AC000061A32C000000008061A5060000000023A
-:100AD000061A523000000012041A4030000202755B
-:100AE000061AD0F000000002021A293C00000000A3
-:100AF000061A31C000000002041A31C8000502774E
-:100B0000061A31DC00000009061A32E00000000875
-:100B1000061A507000000002061A527800000012F7
-:100B2000041A40380002027C061AD0F800000002C5
-:100B30000200A294071D29110200A29800000000E3
-:100B40000200A29C009C04240200A2A0000000005D
-:100B50000200A2A4000002090200A270000000002E
-:100B60000200A274000000000200A2700000000059
-:100B70000200A274000000000200A2700000000049
-:100B80000200A274000000000200A2700000000039
-:100B90000200A27400000000020100B40000000185
-:100BA000020100B800000001020100DC00000001A9
-:100BB0000201010000000001020101040000000127
-:100BC0000201007C003000000201008400000028C7
-:100BD0000201008C0000000002010130000000044E
-:100BE0000201025C00000001020103280000000075
-:100BF0000201607000000007020160800000000137
-:100C00000201055400000030020100C40000000190
-:100C1000020100CC00000001020100F80000000108
-:100C2000020100F00000000102010080003000001D
-:100C3000020100880000002802010090000000006E
-:100C40000201013400000004020102DC0000000186
-:100C50000201032C00000000020160740000000784
-:100C60000201608400000001020105640000003000
-:100C7000020100C800000001020100D000000001D4
-:100C8000020100FC00000001020100F4000000016C
-:100C9000020C100000000020020C200800000211CD
-:100CA000020C200C00000200020C201000000204C4
-:100CB000020C201C0000FFFF020C20200000FFFFA0
-:100CC000020C20240000FFFF020C20280000FFFF80
-:100CD000060C203800000002020C20400000003406
-:100CE000020C204400000035020C204800000020C7
-:100CF000020C204C00000021020C205000000022B9
-:100D0000020C205400000023020C20580000002494
-:100D1000020C205C00000025020C20600000002670
-:100D2000020C206400000027020C2068000000284C
-:100D3000020C206C00000029020C20700000002A28
-:100D4000020C20740000002B060C207800000056D6
-:100D5000020C21D000000001020C21D4000000018F
-:100D6000020C21D800000001020C21DC000000016F
-:100D7000020C21E000000001020C21E4000000014F
-:100D8000020C21E800000001020C21EC000000012F
-:100D9000020C21F000000001020C21F4000000010F
-:100DA000060C21F800000010020C223807FFFFFF9C
-:100DB000020C223C0000003F020C224007FFFFFF14
-:100DC000020C22440000000F010C22480000000029
-:100DD000010C224C00000000010C22500000000019
-:100DE000010C225400000000010C225800000000F9
-:100DF000010C225C00000000010C226000000000D9
-:100E0000010C226400000000010C226800000000B8
-:100E1000010C226C00000000010C22700000000098
-:100E2000010C227400000000010C22780000000078
-:100E3000010C227C000000000C0C2000000003E8E4
-:100E40000A0C2000000000010B0C20000000000A2A
-:100E5000020C400800000411020C400C00000400C9
-:100E6000020C401000000404020C40140000042195
-:100E7000020C401C0000FFFF020C40200000FFFF9E
-:100E8000020C40240000FFFF020C40280000FFFF7E
-:100E9000020C403800000046020C403C00000005F7
-:100EA000060C404000000002020C40480000000A0E
-:100EB000020C404C000000F0060C40500000001FE7
-:100EC000020C40CC00000001060C40D00000003AAB
-:100ED000020C41B800000001060C41BC00000003F8
-:100EE000020C41C800000001020C41CC00000001CE
-:100EF000060C41D00000001A020C423807FFFFFF29
-:100F0000020C423C0000003F020C424007FFFFFF82
-:100F1000020C42440000000F010C42480000000097
-:100F2000010C424C00000000010C42500000000087
-:100F3000010C425400000000010C42580000000067
-:100F4000010C425C00000000010C42600000000047
-:100F5000010C426400000000010C42680000000027
-:100F6000010C426C00000000010C42700000000007
-:100F7000010C427400000000010C427800000000E7
-:100F8000010C427C00000000010C428000000000C7
-:100F90000C0C4000000003E80A0C400000000001B7
-:100FA0000B0C40000000000A020D0044000000325B
-:100FB000020D008C02150020020D00900215002089
-:100FC000020D009408100000020D0098000000338C
-:100FD000020D009C00000002020D00A000000000B5
-:100FE000020D00A400000005020D00A8000000058D
-:100FF000060D00AC00000002020D00B4000000026B
-:10100000020D00B800000003020D00BC0000000249
-:10101000020D00C000000001020D00C80000000227
-:10102000020D00CC00000002020D010800000001CA
-:10103000020D015C00000001020D016400000001CE
-:10104000020D016800000002020D02040000000110
-:10105000020D020C00000020020D021000000040F2
-:10106000020D021400000040020D022000000003E7
-:10107000020D022400000018060D0280000000127C
-:10108000040D03000024027E020D004C000000014C
-:10109000020D005000000002020D00540000000884
-:1010A000020D005800000008060D005C000000045E
-:1010B000020D00C400000004020D00040000000145
-:1010C000020D000800000001020D000C00000001EC
-:1010D000020D001000000001020D001400000001CC
-:1010E000020D001800000001020D001C00000001AC
-:1010F000020D002000000001020D0024000000018C
-:10110000020D002800000001020D002C000000016B
-:10111000020D003000000001020D0034000000014B
-:10112000020D003800000001020D003C000000012B
-:10113000020D011400000009020D011C0000000A4C
-:10114000020D012400000007020D012C0000000721
-:10115000020D01340000000C020D013C0000000BE8
-:10116000020D014400000007020D011800000029D3
-:10117000020D01200000002A020D012800000027B6
-:10118000020D013000000027020D01380000002C84
-:10119000020D01400000002B020D01480000002755
-:1011A000020D011400000019020D011C0000001ABC
-:1011B000020D012400000017020D012C0000001791
-:1011C000020D01340000001C020D013C0000001B58
-:1011D000020D014400000017020D01180000003943
-:1011E000020D01200000003A020D01280000003726
-:1011F000020D013000000037020D01380000003CF4
-:10120000020D01400000003B020D014800000037C4
-:10121000020D011400000049020D011C0000004AEB
-:10122000020D012400000047020D012C00000047C0
-:10123000020D01340000004C020D013C0000004B87
-:10124000020D014400000047020D01180000006972
-:10125000020D01200000006A020D01280000006755
-:10126000020D013000000067020D01380000006C23
-:10127000020D01400000006B020D014800000067F4
-:10128000020D011400000059020D011C0000005A5B
-:10129000020D012400000057020D012C0000005730
-:1012A000020D01340000005C020D013C0000005BF7
-:1012B000020D014400000057020D011800000079E2
-:1012C000020D01200000007A020D012800000077C5
-:1012D000020D013000000077020D01380000007C93
-:1012E000020D01400000007B020D01480000007764
-:1012F000020E004C00000032020E00940215002085
-:10130000020E009802150020020E009C0000003022
-:10131000020E00A008100000020E00A4000000331E
-:10132000020E00A800000030020E00AC00000031E8
-:10133000020E00B000000002020E00B40000000423
-:10134000020E00B800000000020E00BC0000000207
-:10135000020E00C000000002020E00C400000000E7
-:10136000020E00C800000002020E00CC00000007C0
-:10137000020E00D000000002020E00D400000002A5
-:10138000020E00D800000001020E00E4000000017F
-:10139000020E014400000001020E014C0000000199
-:1013A000020E015000000002020E020400000001C3
-:1013B000020E020C00000040020E0210000000406D
-:1013C000020E021C00000004020E02200000002099
-:1013D000020E02240000000E020E02280000001B74
-:1013E000060E030000000012040E0280001B02A281
-:1013F000020E00540000000C020E0058000000090C
-:10140000020E005C0000000F020E006000000010E1
-:10141000020E00640000000B060E006800000003CE
-:10142000020E00DC00000003020E000400000001B8
-:10143000020E000800000001020E000C0000000176
-:10144000020E001000000001020E00140000000156
-:10145000020E001800000001020E001C0000000136
-:10146000020E002000000001020E00240000000116
-:10147000020E002800000001020E002C00000001F6
-:10148000020E003000000001020E003400000001D6
-:10149000020E003800000001020E003C00000001B6
-:1014A000020E004000000001020E00440000000196
-:1014B000020E01100000000F020E01180000000EC5
-:1014C000020E012000000000020E012800000000B2
-:1014D000020E01140000002F020E011C0000002E5D
-:1014E000020E012400000000020E012C000000008A
-:1014F000020E01100000001F020E01180000001E65
-:10150000020E012000000000020E01280000000071
-:10151000020E01140000003F020E011C0000003EFC
-:10152000020E012400000000020E012C0000000049
-:10153000020E01100000004F020E01180000004EC4
-:10154000020E012000000000020E01280000000031
-:10155000020E01140000006F020E011C0000006E5C
-:10156000020E012400000000020E012C0000000009
-:10157000020E01100000005F020E01180000005E64
-:10158000020E012000000000020E012800000000F1
-:10159000020E01140000007F020E011C0000007EFC
-:1015A000020E012400000000020E012C00000000C9
-:1015B0000730040000E80000083007D8000502BD2D
-:1015C000073400002EAA000007348000312D0BAB39
-:1015D00007350000358217F707358000396D25582B
-:1015E00007360000142D33B40836321039BE02BF5E
-:1015F0000130000000000000013000040000000085
-:1016000001300008000000000130000C0000000064
-:101610000130001000000000013000140000000044
-:10162000023000200000000102300024000000020F
-:1016300002300028000000030230002C00000000EF
-:1016400002300030000000040230003400000001CD
-:1016500002300038000000000230003C00000001B1
-:10166000023000400000000402300044000000008E
-:1016700002300048000000010230004C000000036E
-:101680000230005000000000023000540000000151
-:1016900002300058000000040230005C000000002E
-:1016A000023000600000000102300064000000030E
-:1016B00002300068000000000230006C00000001F1
-:1016C00002300070000000040230007400000000CE
-:1016D00002300078000000040230007C00000003AB
-:1016E0000630008000000002023000A400003FFF2E
-:1016F000023000A8000003FF0230022400000000B6
-:1017000002300234000000000230024C00000000F1
-:10171000023002E40000FFFF063020000000080055
-:1017200002338BC000000001023380000000001A69
-:10173000023380400000004E023380800000001021
-:10174000023380C0000000200C3383000007A1207A
-:101750000A338300000001380B3383000000138834
-:10176000023383C0000001F40C3383801DCD65007B
-:101770000A3383800004C4B40B338380004C4B4095
-:101780000A331480000000000233148000000001BE
-:10179000063220000000010206328020000000C84E
-:1017A000063280000000000206323DA8000000045E
-:1017B00006323D800000000904323DA4000102C150
-:1017C00006323D00000000200632500000000400F8
-:1017D0000632400000000004063240D00000000243
-:1017E00006326B680000000204326B70000202C215
-:1017F00006326B1000000002043274C0000202C402
-:101800000632DA40000000020632E0000000080064
-:10181000023308000100000004330C00001002C66F
-:10182000023308000000000004330C40001002D610
-:1018300006322450000000B406322AD00000000214
-:1018400006321000000001A002323DB80000000086
-:101850000632500000000020063251000000002037
-:101860000632520000000020063253000000002023
-:10187000063254000000002006325500000000200F
-:1018800006325600000000200632570000000020FB
-:1018900006325800000000200632590000000020E7
-:1018A00006325A000000002006325B0000000020D3
-:1018B00006325C000000002006325D0000000020BF
-:1018C00006325E000000002006325F0000000020AB
-:1018D00006326B780000005206326E080000000CE1
-:1018E0000632DA880000000206322720000000B429
-:1018F00006322AD80000000206321680000001A03D
-:1019000002323DBC00000000063250800000002082
-:101910000632518000000020063252800000002074
-:101920000632538000000020063254800000002060
-:10193000063255800000002006325680000000204C
-:101940000632578000000020063258800000002038
-:10195000063259800000002006325A800000002024
-:1019600006325B800000002006325C800000002010
-:1019700006325D800000002006325E8000000020FC
-:1019800006325F800000002006326CC0000000526A
-:1019900006326E380000000C0632DA9000000002B9
-:1019A00002322A300000000006324010000000021F
-:1019B0000632D0000000000602322A340000000087
-:1019C00006324020000000020632D0180000000657
-:1019D00002322A38000000000632403000000002C7
-:1019E0000632D0300000000602322A3C000000001F
-:1019F00006324040000000020632D04800000006D7
-:101A000002322A400000000006324050000000026E
-:101A10000632D0600000000602322A4400000000B6
-:101A200006324060000000020632D0780000000656
-:101A300002322A4800000000063240700000000216
-:101A40000632D0900000000602322A4C000000004E
-:101A500006324080000000020632D0A800000006D6
-:101A6000072004000093000008200780001002E611
-:101A7000072400002ADE0000072480002E050AB893
-:101A80000824E4A061D202E8012000000000000068
-:101A900001200004000000000120000800000000F8
-:101AA0000120000C000000000120001000000000D8
-:101AB00001200014000000000220002000000001AE
-:101AC0000220002400000002022000280000000381
-:101AD0000220002C00000000022000300000000462
-:101AE0000220003400000001022000380000000045
-:101AF0000220003C00000001022000400000000421
-:101B00000220004400000000022000480000000104
-:101B10000220004C000000030220005000000000E2
-:101B200002200054000000010220005800000004C0
-:101B30000220005C000000000220006000000001A4
-:101B40000220006400000003022000680000000082
-:101B50000220006C00000001022000700000000460
-:101B60000220007400000000022000780000000441
-:101B70000220007C0000000306200080000000021C
-:101B8000022000A400003FFF022000A8000003FF85
-:101B900002200224000000000220023400000000A5
-:101BA0000220024C00000000022002E40000FFFFBF
-:101BB000062020000000080002238BC00000000166
-:101BC0000223800000000010022380400000001269
-:101BD0000223808000000030022380C00000000E3D
-:101BE000022383C0000001F40223148000000001DE
-:101BF0000A231480000000000622100000000042AA
-:101C000006227020000000C80622700000000002BA
-:101C1000022211E80000000006223000000000C08F
-:101C2000062240700000008006225280000000045E
-:101C30000622670000000100062290000000040058
-:101C400004226B08002002EA02230800013FFFFF84
-:101C500004230C000010030A022308000000000007
-:101C600004230C400010031A06228100000000A08B
-:101C7000062286000000004006228C000000003C86
-:101C80000622B0000000020006228800000000804A
-:101C900006228DE00000003C0622404000000006C5
-:101CA00006228380000000A006228700000000407A
-:101CB00006228CF00000003C0622B8000000020062
-:101CC00006228A000000008006228ED00000003C20
-:101CD000062240580000000606228000000000088E
-:101CE000022211480000000006223300000000021A
-:101CF000062260400000003006228020000000081C
-:101D00000222114C000000000622330800000002ED
-:101D1000062261000000003006228040000000081A
-:101D200002221150000000000622331000000002C1
-:101D3000062261C00000003006228060000000081A
-:101D40000222115400000000062233180000000295
-:101D50000622628000000030062280800000000819
-:101D60000222115800000000062233200000000269
-:101D70000622634000000030062280A00000000818
-:101D80000222115C0000000006223328000000023D
-:101D90000622640000000030062280C00000000817
-:101DA0000222116000000000062233300000000211
-:101DB000062264C000000030062280E00000000817
-:101DC00002221164000000000622333800000002E5
-:101DD0000622658000000030021610000000002876
-:101DE00002170008000000020217002C0000000388
-:101DF0000217003C00000004021700440000000825
-:101E000002170048000000020217004C000000907A
-:101E1000021700500000009002170054008000904C
-:101E20000217005808140000021700600000008A22
-:101E300002170064000000800217006800000081A3
-:101E40000217006C000000800217007000000006FE
-:101E500002170078000007D00217007C0000076C12
-:101E600002170038007C1004021700040000000F65
-:101E70000616402400000002021640700000001CFC
-:101E80000216420800000001021642100000000184
-:101E90000216422000000001021642280000000144
-:101EA0000216423000000001021642380000000114
-:101EB00002164260000000020C16401C0003D09085
-:101EC0000A16401C0000009C0B16401C000009C4B0
-:101ED0000216403000000008021640340000000CDA
-:101EE0000216403800000010021640440000002096
-:101EF0000216400000000001021640D80000000158
-:101F000002164008000000010216400C000000010B
-:101F100002164010000000010216424000000000BE
-:101F2000021642480000000006164270000000023F
-:101F30000216425000000000021642580000000045
-:101F40000616428000000002021660080000042409
-:101F50000216600C00000410021660100000041449
-:101F60000216601C0000FFFF021660200000FFFF49
-:101F7000021660240000FFFF021660280000FFFF29
-:101F800002166038000000200216603C00000020AD
-:101F90000216604000000034021660440000003564
-:101FA00002166048000000230216604C0000002466
-:101FB0000216605000000025021660540000002642
-:101FC00002166058000000270216605C000000291D
-:101FD000021660600000002A021660640000002BF8
-:101FE000021660680000002C0216606C0000002DD4
-:101FF0000616607000000052021661B80000000171
-:10200000061661BC0000001F0216623807FFFFFFC2
-:102010000216623C0000003F0216624007FFFFFF0D
-:10202000021662440000000F011662480000000022
-:102030000116624C00000000011662500000000012
-:1020400001166254000000000116625800000000F2
-:102050000116625C000000000116626000000000D2
-:1020600001166264000000000116626800000000B2
-:102070000116626C00000000011662700000000092
-:102080000116627400000000011662780000000072
-:102090000116627C000000000C166000000003E8DE
-:1020A0000A166000000000010B1660000000000A24
-:1020B0000216804000000006021680440000000561
-:1020C000021680480000000A0216804C000000053D
-:1020D0000216805400000002021680CC00000004AA
-:1020E000021680D000000004021680D40000000414
-:1020F000021680D800000004021680DC00000004F4
-:10210000021680E000000004021680E400000004D3
-:10211000021680E800000004021688040000000493
-:10212000021680300000007C021680340000003D62
-:10213000021680380000003F0216803C0000009C20
-:10214000021680F000000007061680F4000000056B
-:102150000216880C0101010102168108000000002E
-:102160000216810C00000004021681100000000419
-:1021700002168114000000020216881008012004D3
-:1021800002168118000000050216811C00000005DF
-:1021900002168120000000050216812400000005BF
-:1021A0000216882C20081001021681280000000861
-:1021B0000216812C00000006021681300000000784
-:1021C000021681340000000002168830010101204F
-:1021D000061681380000000402168834010101014E
-:1021E00002168148000000000216814C0000000425
-:1021F0000216815000000004021681540000000203
-:1022000002168838080120040216815800000005D3
-:102210000216815C000000050216816000000005C6
-:1022200002168164000000050216883C2008100197
-:1022300002168168000000080216816C000000068A
-:102240000216817000000007021681740000000170
-:102250000216884001010120021681780000000169
-:102260000216817C0000000102168180000000013E
-:102270000216818400000001021688440101010158
-:1022800002168188000000010216818C0000000403
-:1022900002168190000000040216819400000002E2
-:1022A00002168848080120040216819800000005E3
-:1022B0000216819C00000005021681A000000005A6
-:1022C000021681A4000000050216881420081001DF
-:1022D000021681A800000008021681AC000000066A
-:1022E000021681B000000007021681B40000000150
-:1022F0000216881801010120021681B800000001B1
-:10230000021681BC00000001021681C0000000011D
-:10231000021681C4000000010216881C010101019F
-:10232000021681C800000001021681CC00000004E2
-:10233000021681D000000004021681D400000002C1
-:102340000216882008012004021681D8000000052A
-:10235000021681DC00000005021681E00000000585
-:10236000021681E4000000050216882420081001EE
-:10237000021681E800000008021681EC0000000649
-:10238000021681F0000000070216E40C00000000B5
-:1023900002168828010101200616E410000000043E
-:1023A0000216E000010101010216E4200000000015
-:1023B0000216E424000000040216E42800000004D1
-:1023C0000216E42C000000020216E00408012004BA
-:1023D0000216E430000000050216E4340000000597
-:1023E0000216E438000000050216E43C0000000577
-:1023F0000216E008200810010216E4400000000860
-:102400000216E444000000060216E448000000073B
-:102410000216E44C000000000216E00C010101204D
-:102420000616E450000000040216E010010101014C
-:102430000216E460000000000216E46400000004DC
-:102440000216E468000000040216E46C00000002BA
-:102450000216E014080120040216E47000000005D2
-:102460000216E474000000050216E478000000057E
-:102470000216E47C000000050216E0182008100196
-:102480000216E480000000080216E4840000000642
-:102490000216E488000000070216E48C0000000128
-:1024A0000216E01C010101200216E4900000000168
-:1024B0000216E494000000010216E49800000001F6
-:1024C0000216E49C000000010216E0200101010157
-:1024D0000216E4A0000000010216E4A400000004BB
-:1024E0000216E4A8000000040216E4AC000000029A
-:1024F0000216E024080120040216E4B000000005E2
-:102500000216E4B4000000050216E4B8000000055D
-:102510000216E4BC000000050216E02820081001A5
-:102520000216E4C0000000080216E4C40000000621
-:102530000216E4C8000000070216E4CC0000000107
-:102540000216E02C010101200216E4D00000000177
-:102550000216E4D4000000010216E4D800000001D5
-:102560000216E4DC000000010216E0300101010166
-:102570000216E4E0000000010216E4E4000000049A
-:102580000216E4E8000000040216E4EC0000000279
-:102590000216E034080120040216E4F000000005F1
-:1025A0000216E4F4000000050216E4F8000000053D
-:1025B0000216E4FC000000050216E03820081001B5
-:1025C0000216E500000000080216E50400000006FF
-:1025D0000216E508000000070216E03C0101012098
-:1025E00002168240003F003F0216824400000000B5
-:1025F0000216E524003F003F0216E5280000000017
-:1026000002168248000000000216824C003F003F84
-:102610000216E52C000000000216E530003F003FE6
-:1026200002168250010001000216825401000100CE
-:102630000216E534010001000216E5380100010030
-:1026400006168258000000020216E53C0000000059
-:102650000216E540000000000216826000C000C0C3
-:102660000216826400C000C00216E54400C000C02B
-:102670000216E54800C000C0021682681E001E0057
-:102680000216826C1E001E000216E54C1E001E0083
-:102690000216E5501E001E00021682704000400027
-:1026A00002168274400040000216E55440004000CB
-:1026B0000216E55840004000021682788000800033
-:1026C0000216827C800080000216E55C800080009B
-:1026D0000216E56080008000021682802000200043
-:1026E00002168284200020000216E56420002000EB
-:1026F0000216E5682000200006168288000000020D
-:102700000216E56C000000000216E57000000000F3
-:102710000216829000000000021682940000000061
-:102720000216E574000000000216E57800000000C3
-:1027300002168298000000000216829C0000000031
-:102740000216E57C000000000216E5800000000093
-:10275000021682A000000000021682A40000000100
-:10276000061682A80000000A021681F400000C0878
-:10277000021681F800000040021681FC00000100F2
-:1027800002168200000000200216820400000017DA
-:1027900002168208000000800216820C000002006F
-:1027A00002168210000000000216821801FF01FFCD
-:1027B0000216821401FF01FF0216E51001FF01FF5E
-:1027C0000216E50C01FF01FF0216823C0000001317
-:1027D000021680900000013F021680600000014058
-:1027E00002168064000001400616806800000002A6
-:1027F00002168070000000C00616807400000007FA
-:102800000216809C00000048021680A000000048CC
-:10281000061680A400000002021680AC00000048EA
-:10282000061680B000000007021682380000800003
-:1028300002168234000025E40216809400007FFF17
-:1028400002168220000F000F0216821C000F000FDC
-:102850000216E518000F000F0216E514000F000F16
-:10286000021682280000000002168224FFFFFFFFEC
-:102870000216E520000000000216E51CFFFFFFFF26
-:102880000216E6BC000000000216E6C000000002CE
-:102890000216E6C4000000010216E6C800000003AC
-:1028A0000216E6CC000000040216E6D00000000686
-:1028B0000216E6D4000000050216E6D80000000764
-:1028C000021680EC000000FF02140000000000016E
-:1028D0000214000C0000000102140040000000017E
-:1028E0000214004400007FFF0214000C00000000EE
-:1028F00002140000000000000214006C0000000040
-:102900000214000400000001021400300000000165
-:1029100002140004000000000214005C000000002B
-:10292000021400080000000102140034000000013D
-:102930000214000800000000021400600000000003
-:102940000202005800000032020200A0031500201D
-:10295000020200A403150020020200A801000030BA
-:10296000020200AC08100000020200B000000033B8
-:10297000020200B400000030020200B80000003182
-:10298000020200BC00000003020200C000000006BA
-:10299000020200C400000003020200C8000000039D
-:1029A000020200CC00000002020200D00000000081
-:1029B000020200D400000002020200DC000000005D
-:1029C000020200E000000006020200E40000000431
-:1029D000020200E800000002020200EC0000000217
-:1029E000020200F000000001020200FC00000006EC
-:1029F0000202012000000000020201340000000277
-:102A0000020201B0000000010202020C00000001FD
-:102A1000020202140000000102020218000000027B
-:102A200002020404000000010202040C0000004045
-:102A300002020410000000400202041C0000000416
-:102A40000202042000000020020204240000000210
-:102A50000202042800000020060205000000001207
-:102A600004020480001F032A020200600000000F1D
-:102A70000202006400000007020200680000000B70
-:102A80000202006C0000000E020200700000000E46
-:102A90000602007400000003020200F400000004BB
-:102AA0000202000400000001020200080000000110
-:102AB0000202000C000000010202001000000001F0
-:102AC00002020014000000010202001800000001D0
-:102AD0000202001C000000010202002000000001B0
-:102AE0000202002400000001020200280000000190
-:102AF0000202002C00000001020200300000000170
-:102B0000020200340000000102020038000000014F
-:102B10000202003C0000000102020040000000012F
-:102B2000020200440000000102020048000000010F
-:102B30000202004C000000010202005000000001EF
-:102B400002020108000000C8020201180000000291
-:102B5000020201C400000000020201CC00000000DB
-:102B6000020201D400000002020201DC00000002A7
-:102B7000020201E4000000FF020201EC000000FF7D
-:102B800002020100000000000202010C000000C867
-:102B90000202011C00000002020201C80000000045
-:102BA000020201D000000000020201D80000000271
-:102BB000020201E000000002020201E8000000FF42
-:102BC000020201F0000000FF020201040000000008
-:102BD00002020108000000C8020201180000000201
-:102BE000020201C400000000020201CC000000004B
-:102BF000020201D400000002020201DC0000000217
-:102C0000020201E4000000FF020201EC000000FFEC
-:102C100002020100000000000202010C000000C8D6
-:102C20000202011C00000002020201C800000000B4
-:102C3000020201D000000000020201D800000002E0
-:102C4000020201E000000002020201E8000000FFB1
-:102C5000020201F0000000FF020201040000000077
-:102C600002020108000000C8020201180000000270
-:102C7000020201C400000000020201CC00000000BA
-:102C8000020201D400000002020201DC0000000286
-:102C9000020201E4000000FF020201EC000000FF5C
-:102CA00002020100000000000202010C000000C846
-:102CB0000202011C00000002020201C80000000024
-:102CC000020201D000000000020201D80000000250
-:102CD000020201E000000002020201E8000000FF21
-:102CE000020201F0000000FF0202010400000000E7
-:102CF00002020108000000C80202011800000002E0
-:102D0000020201C400000000020201CC0000000029
-:102D1000020201D400000002020201DC00000002F5
-:102D2000020201E4000000FF020201EC000000FFCB
-:102D300002020100000000000202010C000000C8B5
-:102D40000202011C00000002020201C80000000093
-:102D5000020201D000000000020201D800000002BF
-:102D6000020201E000000002020201E8000000FF90
-:102D7000020201F0000000FF020201040000000056
-:102D80000728040000C00000082807A8000B03491A
-:102D9000072C000032FC0000072C800035790CC0A5
-:102DA000072D00003AC11A1F072D800039EF28D0E7
-:102DB000072E00001C3E374C082E3710391E034BDF
-:102DC00001280000000000000128000400000000AD
-:102DD00001280008000000000128000C000000008D
-:102DE000012800100000000001280014000000006D
-:102DF0000228002000000001022800240000000238
-:102E000002280028000000030228002C0000000017
-:102E100002280030000000040228003400000001F5
-:102E200002280038000000000228003C00000001D9
-:102E300002280040000000040228004400000000B6
-:102E400002280048000000010228004C0000000396
-:102E50000228005000000000022800540000000179
-:102E600002280058000000040228005C0000000056
-:102E70000228006000000001022800640000000336
-:102E800002280068000000000228006C0000000119
-:102E900002280070000000040228007400000000F6
-:102EA00002280078000000040228007C00000003D3
-:102EB0000628008000000002022800A400003FFF56
-:102EC000022800A8000003FF0228022400000000DE
-:102ED00002280234000000000228024C000000001A
-:102EE000022802E40000FFFF06282000000008007E
-:102EF000022B8BC000000001022B800000000000AC
-:102F0000022B804000000018022B80800000000C83
-:102F1000022B80C0000000660C2B83000007A1205C
-:102F20000A2B8300000001380B2B8300000013885C
-:102F3000022B83C0000001F40C2B8340000001F43D
-:102F40000A2B8340000000000B2B8340000000058B
-:102F50000A2B83800004C4B40C2B83801DCD650034
-:102F60000A2B1480000000000B2B8380004C4B4088
-:102F7000022B148000000001062A29C8000000046A
-:102F8000042A29D80002034D062A208000000048A8
-:102F9000062A9020000000C8062A900000000002C7
-:102FA000062A21A800000086062A20000000002032
-:102FB000022A23C800000000042A23D00002034F85
-:102FC000042A249800040351022A2C500000000017
-:102FD000022A2C1000000000042A2C0800020355CD
-:102FE000042A300000020357062A300800000100BE
-:102FF000062A404000000010042A40000010035937
-:10300000062A6AC000000002062A6B0000000004C5
-:10301000042A840800020369022B08000000000053
-:10302000042B0C000010036B022B080001000000B1
-:10303000042B0C400008037B022B08000200000058
-:10304000042B0C6000080383062AC000000000D88F
-:10305000062A24A800000014062A254800000022A1
-:10306000042A25D00002038B062A266800000022CD
-:10307000042A26F00002038D062A27880000002279
-:10308000042A28100002038F062A28A80000002224
-:10309000042A293000020391062AA000000000281B
-:1030A000062AA1400000000C042A29E00002039334
-:1030B000062A502000000002062A503000000002BC
-:1030C000062A500000000002062A501000000002EC
-:1030D000022A520800000001042A6AC8000203956F
-:1030E000062A6B1000000042062A6D200000000432
-:1030F000062ABCD000000002062AC360000000D8E7
-:10310000062A24F800000014062A25D80000002210
-:10311000042A266000020397062A26F800000022EF
-:10312000042A278000020399062A2818000000229A
-:10313000042A28A00002039B062A29380000002246
-:10314000042A29C00002039D062AA0A0000000282E
-:10315000062AA1700000000C042A29E80002039F3F
-:10316000062A502800000002062A503800000002FB
-:10317000062A500800000002062A5018000000022B
-:10318000022A520C00000001042A6AD0000203A1A6
-:10319000062A6C1800000042062A6D300000000468
-:1031A000062ABCD800000002022AC6C000000000A7
-:1031B000042A29F0001003A3062A50480000000E3C
-:1031C000062AB00000000006022AC6C40000000063
-:1031D000042A2A30001003B3062A50800000000E93
-:1031E000062AB01800000006022AC6C80000000027
-:1031F000042A2A70001003C3062A50B80000000EEB
-:10320000062AB03000000006022AC6CC00000000EA
-:10321000042A2AB0001003D3062A50F00000000E42
-:10322000062AB04800000006022AC6D000000000AE
-:10323000042A2AF0001003E3062A51280000000E99
-:10324000062AB06000000006022AC6D40000000072
-:10325000042A2B30001003F3062A51600000000EF0
-:10326000062AB07800000006022AC6D80000000036
-:10327000042A2B7000100403062A51980000000E47
-:10328000062AB09000000006022AC6DC00000000FA
-:10329000042A2BB000100413062A51D00000000E9F
-:1032A000062AB0A800000006021010080000000165
-:1032B0000210105000000001021010000003D000A6
-:1032C000021010040000003D091018000200042341
-:1032D0000910110000280623061011A00000001894
-:1032E00006102400000000E00210201C0000000076
-:1032F0000210202000000001021020C00000000287
-:10330000021020040000000102102008000000014B
-:1033100009103C000005064B091038000005065056
-:10332000091038200005065506104C000000010069
-:1033300002104028000000100210404400003FFF2F
-:103340000210405800280000021040840084924A75
-:1033500002104058000000000210800000001080A1
-:10336000021080AC00000000021080380000001045
-:103370000210810000000000061081200000000201
-:1033800002108008000002B502108010000000004A
-:10339000061082000000004A021081080001FFFFB1
-:1033A00006108140000000020210800000001A8018
-:1033B0000610900000000024061091200000004A32
-:1033C000061093700000004A061095C00000004AE5
-:1033D0000210800400001080021080B00000000184
-:1033E0000210803C00000010021081040000000068
-:1033F00006108128000000020210800C000002B5B7
-:103400000210801400000000061084000000004A32
-:103410000210810C0001FFFF06108148000000022D
-:103420000210800400001A80061090900000002412
-:10343000061092480000004A061094980000004AC6
-:10344000061096E80000004A02108000000010807C
-:10345000021080AC00000002021080380000001052
-:103460000210810000000000061081200000000210
-:1034700002108008000002B5021080100000000059
-:10348000061082000000004A021081080001FFFFC0
-:1034900006108140000000020210800000001A8027
-:1034A0000610900000000024061091200000004A41
-:1034B000061093700000004A061095C00000004AF4
-:1034C0000210800400001080021080B00000000391
-:1034D0000210803C00000010021081040000000077
-:1034E00006108128000000020210800C000002B5C6
-:1034F0000210801400000000061084000000004A42
-:103500000210810C0001FFFF06108148000000023C
-:103510000210800400001A80061090900000002421
-:10352000061092480000004A061094980000004AD5
-:10353000061096E80000004A02108000000010808B
-:10354000021080AC0000000402108038000000105F
-:10355000021081000000000006108120000000021F
-:1035600002108008000002B5021080100000000068
-:10357000061082000000004A021081080001FFFFCF
-:1035800006108140000000020210800000001A8036
-:103590000610900000000024061091200000004A50
-:1035A000061093700000004A061095C00000004A03
-:1035B0000210800400001080021080B0000000059E
-:1035C0000210803C00000010021081040000000086
-:1035D00006108128000000020210800C000002B5D5
-:1035E0000210801400000000061084000000004A51
-:1035F0000210810C0001FFFF06108148000000024C
-:103600000210800400001A80061090900000002430
-:10361000061092480000004A061094980000004AE4
-:10362000061096E80000004A02108000000010809A
-:10363000021080AC0000000602108038000000106C
-:10364000021081000000000006108120000000022E
-:1036500002108008000002B5021080100000000077
-:10366000061082000000004A021081080001FFFFDE
-:1036700006108140000000020210800000001A8045
-:103680000610900000000024061091200000004A5F
-:10369000061093700000004A061095C00000004A12
-:1036A0000210800400001080021080B000000007AB
-:1036B0000210803C00000010021081040000000095
-:1036C00006108128000000020210800C000002B5E4
-:1036D0000210801400000000061084000000004A60
-:1036E0000210810C0001FFFF06108148000000025B
-:1036F0000210800400001A80061090900000002440
-:10370000061092480000004A061094980000004AF3
-:10371000061096E80000004A021205B00000000101
-:103720000212049000E383400212051400003C10D2
-:103730000212066C00000001021206700000000078
-:1037400002120494FFFFFFFF02120498FFFFFFFF25
-:103750000212049CFFFFFFFF021204A0FFFFFFFF05
-:10376000021204A4FFFFFFFF021204A8FFFFFFFFE5
-:10377000021204ACFFFFFFFF021204B0FFFFFFFFC5
-:10378000021204BCFFFFFFFF021204C0FFFFFFFF95
-:10379000021204C4FFFFFFFF021204C8FFFFFFFF75
-:1037A000021204CCFFFFFFFF021204D0FFFFFFFF55
-:1037B000021204D8FFFFFFFF021204DCFFFFFFFF2D
-:1037C000021204E0FFFFFFFF021204E4FFFFFFFF0D
-:1037D000021204E8FFFFFFFF021204ECFFFFFFFFED
-:1037E000021204F0FFFFFFFF021204F4FFFFFFFFCD
-:1037F000021204F8FFFFFFFF021204FCFFFFFFFFAD
-:1038000002120500FFFFFFFF02120504FFFFFFFF8A
-:1038100002120508FFFFFFFF0212050CFFFFFFFF6A
-:1038200002120510FFFFFFFF021204D4FF802000E8
-:10383000021204B4F0005000021204B8F0001000AC
-:1038400002120390000000080212039C000000080E
-:10385000021203A000000008021203A400000002EC
-:10386000021203BC00000004021203C000000005A5
-:10387000021203C400000004021203D00000000082
-:103880000212036C00000001021203680000003FF6
-:10389000021201BC00000040021201C00000180822
-:1038A000021201C400000803021201C8000008034C
-:1038B000021201CC00000040021201D000000003FF
-:1038C000021201D400000803021201D8000008030C
-:1038D000021201DC00000803021201E000010003F3
-:1038E000021201E400000803021201E800000803CC
-:1038F000021201EC00000003021201F000000003BC
-:10390000021201F400000003021201F8000000039B
-:10391000021201FC0000000302120200000000037A
-:103920000212020400000003021202080000000359
-:103930000212020C00000003021202100000000339
-:103940000212021400000003021202180000000319
-:103950000212021C000000030212022000000003F9
-:1039600002120224000000030212022800002403B5
-:103970000212022C0000002F021202300000000987
-:103980000212023400000019021202380000018401
-:103990000212023C000001830212024000000306F2
-:1039A0000212024400000019021202480000000640
-:1039B0000212024C0000030602120250000003062D
-:1039C00002120254000003060212025800000C8684
-:1039D0000212025C000003060212026000000306ED
-:1039E00002120264000000060212026800000006D3
-:1039F0000212026C000000060212027000000006B3
-:103A00000212027400000006021202780000000692
-:103A10000212027C00000006021202800000000672
-:103A20000212028400000006021202880000000652
-:103A30000212028C00000006021202900000000632
-:103A40000212029400000006021202980000000612
-:103A50000212029C00000006021202A000000306EF
-:103A6000021202A400000013021202A800000006C5
-:103A7000021202B000001004021202B4000010048E
-:103A80000212032400106440021203280010644054
-:103A9000021205B400000001021201B00000000192
-:103AA0000600A000000000160200A0EC5554000023
-:103AB0000200A0F0555555550200A0F400005555E0
-:103AC0000200A0F8F00000000200A0FC5554000025
-:103AD0000200A100555555550200A104000055559E
-:103AE0000200A108F00000000200A18C5554000063
-:103AF0000200A190555555550200A194000055555E
-:103B00000200A198F00000000200A19C000000004B
-:103B10000200A1A0000100000200A1A400005014B6
-:103B20000200A1A8000000000200A45C00000C003C
-:103B30000200A61C000000030200A06CFF5C000055
-:103B40000200A070FFF55FFF0200A0740000FFFFFD
-:103B50000200A078F00003E00200A07C000000005A
-:103B60000200A0800000A0000600A0840000000564
-:103B70000200A0980FE000000600A09C00000007D3
-:103B80000200A0B8000004000600A0BC0000000372
-:103B90000200A0C8000010000600A0CC0000000336
-:103BA0000200A0D8000040000600A0DC00000003D6
-:103BB0000200A0E8000100000600A22C00000004A2
-:103BC0000200A10CFF5C00000200A110FFF55FFFE6
-:103BD0000200A1140000FFFF0200A118F00003E0A2
-:103BE0000200A11C000000000200A1200000A000B3
-:103BF0000600A124000000050200A1380FE000002B
-:103C00000600A13C000000070200A15800000800C7
-:103C10000600A15C000000030200A1680000200073
-:103C20000600A16C000000030200A17800008000E3
-:103C30000600A17C000000030200A1880002000031
-:103C40000600A23C0000000400000000000000008C
-:103C50000000003100000000000000000000000033
-:103C60000000000000000000000000000000000054
-:103C700000000000000000000000000000310032E1
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA000000000000000000000320056000000008C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000000000000056008C000000000000000002
-:103CE000008C009000900094009400980098009C34
-:103CF000009C00A000A000A400A400A800A800ACA4
-:103D000000AC00B100B100B300B300B5000000008A
-:103D100000000000000000000000000000000000A3
-:103D200000000000000000000000000000B50102DB
-:103D30000102010A010A01120112011B011B0124E7
-:103D40000124012D012D01360136013F013F0148BB
-:103D5000014801510151015A00000000000000001B
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD00000000000000000000000000000000000E3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E00000000000000000000015A015F00000000F7
-:103E100000000000015F0160016001610161016259
-:103E2000016201630163016401640165016501666A
-:103E300001660167000000000000000000000000B3
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000167016C016C0179017901860000000095
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000000000000000000032
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB00000000000000000000186018700000000F3
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE00000000000018701BE00000000000000008B
-:103EF00000000000000000000000000000000000C2
-:103F000000000000000000000000000000000000B1
-:103F100001BE01E9000000000000000000000000F8
-:103F20000000000000000000000000000000000091
-:103F300000000000000000000000000001E9021A7B
-:103F40000000000000000000021A022102210228E5
-:103F50000228022F022F02360236023D023D0244A1
-:103F60000244024B024B02520252028A000000003D
-:103F700000000000028A028E028E029202920296D5
-:103F80000296029A029A029E029E02A202A202A631
-:103F900002A602AA02AA02FA02FA031103110328D6
-:103FA0000328032B032B032E032E03310331033489
-:103FB000033403370337033A033A033D033D034019
-:103FC00003400381038103880388038F038F0393D6
-:103FD000039303970397039B039B039F039F03A3F1
-:103FE00003A303A703A703AB03AB03AF03AF03B064
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:10401000000000000000000003B003C20000000028
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:104040000000000003C203D703D703DA03DA03DD5D
-:104050000000000000000000000000000000000060
-:104060000000000000000000000000000000000050
-:1040700003DD040A00000000000000000000000052
-:104080000000000000000000000000000000000030
-:10409000000000000000000000000000040A050D00
-:1040A0000000000000000000000000000000000010
-:1040B0000000000000000000000000000000000000
-:1040C0000000000000000000050D0514051405188F
-:1040D0000518051C000000000000000000000000A2
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000051C055C00000000000000003E
-:10410000055C05650565056E056E05770577058017
-:1041100005800589058905920592059B059B05A4E7
-:1041200005A405FD05FD0613061306290629062D1F
-:10413000062D063106310635063506390639063DA7
-:10414000063D064106410645064506490649065014
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:10417000000000000000000006500656000000008D
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A0000000000006560659000000000000000054
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D0000659065F0000000000000000000000001B
-:1041E00000000000000000000000000000000000CF
-:1041F00000000000000000000000000000000000BF
-:104200000000000000000000065F066E066E067DDE
-:10421000067D068C068C069B069B06AA06AA06B996
-:1042200006B906C806C806D706D70748000000002A
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000748075B075B076C076C077DE1
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000010000000204C00003098000040E4029
-:1042F00000051300000617C000071C8000082140BD
-:1043000000092600000A2AC0000B2F80000C344050
-:10431000000D3900000E3DC0000F428000104740E4
-:1043200000114C00001250C00013558000145A4078
-:1043300000155F00001663C00017688000186D400C
-:1043400000197200001A76C0001B7B80001C8040A0
-:10435000001D8500001E89C0001F8E800020934034
-:10436000000020000000400000006000000080000D
-:104370000000A0000000C0000000E00000010000FC
-:1043800000012000000140000001600000018000E9
-:104390000001A0000001C0000001E00000020000D8
-:1043A00000022000000240000002600000028000C5
-:1043B0000002A0000002C0000002E00000030000B4
-:1043C00000032000000340000003600000038000A1
-:1043D0000003A0000003C0000003E0000004000090
-:1043E000000420000004400000046000000480007D
-:1043F0000004A0000004C0000004E000000500006C
-:104400000005200000054000000560000005800058
-:104410000005A0000005C0000005E0000006000047
-:104420000006200000064000000660000006800034
-:104430000006A0000006C0000006E0000007000023
-:104440000007200000074000000760000007800010
-:104450000007A0000007C0000007E00000080000FF
-:1044600000082000000840000008600000088000EC
-:104470000008A0000008C0000008E00000090000DB
-:1044800000092000000940000009600000098000C8
-:104490000009A0000009C0000009E000000A0000B7
-:1044A000000A2000000A4000000A6000000A8000A4
-:1044B000000AA000000AC000000AE000000B000093
-:1044C000000B2000000B4000000B6000000B800080
-:1044D000000BA000000BC000000BE000000C00006F
-:1044E000000C2000000C4000000C6000000C80005C
-:1044F000000CA000000CC000000CE000000D00004B
-:10450000000D2000000D4000000D6000000D800037
-:10451000000DA000000DC000000DE000000E000026
-:10452000000E2000000E4000000E6000000E800013
-:10453000000EA000000EC000000EE000000F000002
-:10454000000F2000000F4000000F6000000F8000EF
-:10455000000FA000000FC000000FE00000100000DE
-:1045600000102000001040000010600000108000CB
-:104570000010A0000010C0000010E00000110000BA
-:1045800000112000001140000011600000118000A7
-:104590000011A0000011C0000011E0000012000096
-:1045A0000012200000124000001260000012800083
-:1045B0000012A0000012C0000012E0000013000072
-:1045C000001320000013400000136000001380005F
-:1045D0000013A0000013C0000013E000001400004E
-:1045E000001420000014400000146000001480003B
-:1045F0000014A0000014C0000014E000001500002A
-:104600000015200000154000001560000015800016
-:104610000015A0000015C0000015E0000016000005
-:1046200000162000001640000016600000168000F2
-:104630000016A0000016C0000016E00000170000E1
-:1046400000172000001740000017600000178000CE
-:104650000017A0000017C0000017E00000180000BD
-:1046600000182000001840000018600000188000AA
-:104670000018A0000018C0000018E0000019000099
-:104680000019200000194000001960000019800086
-:104690000019A0000019C0000019E000001A000075
-:1046A000001A2000001A4000001A6000001A800062
-:1046B000001AA000001AC000001AE000001B000051
-:1046C000001B2000001B4000001B6000001B80003E
-:1046D000001BA000001BC000001BE000001C00002D
-:1046E000001C2000001C4000001C6000001C80001A
-:1046F000001CA000001CC000001CE000001D000009
-:10470000001D2000001D4000001D6000001D8000F5
-:10471000001DA000001DC000001DE000001E0000E4
-:10472000001E2000001E4000001E6000001E8000D1
-:10473000001EA000001EC000001EE000001F0000C0
-:10474000001F2000001F4000001F6000001F8000AD
-:10475000001FA000001FC000001FE000002000009C
-:104760000020200000204000002060000020800089
-:104770000020A0000020C0000020E0000021000078
-:104780000021200000214000002160000021800065
-:104790000021A0000021C0000021E0000022000054
-:1047A0000022200000224000002260000022800041
-:1047B0000022A0000022C0000022E0000023000030
-:1047C000002320000023400000236000002380001D
-:1047D0000023A0000023C0000023E000002400000C
-:1047E00000242000002440000024600000248000F9
-:1047F0000024A0000024C0000024E00000250000E8
-:1048000000252000002540000025600000258000D4
-:104810000025A0000025C0000025E00000260000C3
-:1048200000262000002640000026600000268000B0
-:104830000026A0000026C0000026E000002700009F
-:10484000002720000027400000276000002780008C
-:104850000027A0000027C0000027E000002800007B
-:104860000028200000284000002860000028800068
-:104870000028A0000028C0000028E0000029000057
-:104880000029200000294000002960000029800044
-:104890000029A0000029C0000029E000002A000033
-:1048A000002A2000002A4000002A6000002A800020
-:1048B000002AA000002AC000002AE000002B00000F
-:1048C000002B2000002B4000002B6000002B8000FC
-:1048D000002BA000002BC000002BE000002C0000EB
-:1048E000002C2000002C4000002C6000002C8000D8
-:1048F000002CA000002CC000002CE000002D0000C7
-:10490000002D2000002D4000002D6000002D8000B3
-:10491000002DA000002DC000002DE000002E0000A2
-:10492000002E2000002E4000002E6000002E80008F
-:10493000002EA000002EC000002EE000002F00007E
-:10494000002F2000002F4000002F6000002F80006B
-:10495000002FA000002FC000002FE000003000005A
-:104960000030200000304000003060000030800047
-:104970000030A0000030C0000030E0000031000036
-:104980000031200000314000003160000031800023
-:104990000031A0000031C0000031E0000032000012
-:1049A00000322000003240000032600000328000FF
-:1049B0000032A0000032C0000032E00000330000EE
-:1049C00000332000003340000033600000338000DB
-:1049D0000033A0000033C0000033E00000340000CA
-:1049E00000342000003440000034600000348000B7
-:1049F0000034A0000034C0000034E00000350000A6
-:104A00000035200000354000003560000035800092
-:104A10000035A0000035C0000035E0000036000081
-:104A2000003620000036400000366000003680006E
-:104A30000036A0000036C0000036E000003700005D
-:104A4000003720000037400000376000003780004A
-:104A50000037A0000037C0000037E0000038000039
-:104A60000038200000384000003860000038800026
-:104A70000038A0000038C0000038E0000039000015
-:104A80000039200000394000003960000039800002
-:104A90000039A0000039C0000039E000003A0000F1
-:104AA000003A2000003A4000003A6000003A8000DE
-:104AB000003AA000003AC000003AE000003B0000CD
-:104AC000003B2000003B4000003B6000003B8000BA
-:104AD000003BA000003BC000003BE000003C0000A9
-:104AE000003C2000003C4000003C6000003C800096
-:104AF000003CA000003CC000003CE000003D000085
-:104B0000003D2000003D4000003D6000003D800071
-:104B1000003DA000003DC000003DE000003E000060
-:104B2000003E2000003E4000003E6000003E80004D
-:104B3000003EA000003EC000003EE000003F00003C
-:104B4000003F2000003F4000003F6000003F800029
-:104B5000003FA000003FC000003FE000003FE00138
-:104B600000000000000001FF0000020000007FF8CC
-:104B700000007FF800000CDF0000150000000001BD
-:104B80000000000100000001FFFFFFFFFFFFFFFF2B
-:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
-:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
-:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
-:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
-:104BD000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
-:104BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
-:104BF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
-:104C0000FFFFFFFFFFFFFFFFFFFFFFFF00000000B0
-:104C1000FFFFFFFF00000000FFFFFFFFFFFFFFFFA0
-:104C200000000000FFFFFFFF00000000FFFFFFFF8C
-:104C3000FFFFFFFF00000000FFFFFFFF000000007C
-:104C4000FFFFFFFF0000000300BEBC20FFFFFFFFCF
-:104C500000000000FFFFFFFF00000000FFFFFFFF5C
-:104C60000000000300BEBC20FFFFFFFF00000000AB
-:104C7000FFFFFFFF00000000FFFFFFFF0000000339
-:104C800000BEBC20FFFFFFFF00000000FFFFFFFF92
-:104C900000000000FFFFFFFF0000000300BEBC207B
-:104CA000FFFFFFFF00000000FFFFFFFF000000000C
-:104CB000FFFFFFFF0000000300BEBC20FFFFFFFF5F
-:104CC00000000000FFFFFFFF00000000FFFFFFFFEC
-:104CD0000000000300BEBC2000002000000040C017
-:104CE00000006180000082400000A3000000C3C0FB
-:104CF0000000E4800001054000012600000146C0DC
-:104D000000016780000188400001A9000001C9C0BE
-:104D10000001EA8000020B4000022C0000024CC09F
-:104D200000026D8000028E400002AF000002CFC082
-:104D30000002F0800003114000033200000352C063
-:104D400000037380000394400003B5000003D5C046
-:104D50000003F6800004174000043800000458C027
-:104D60000004798000049A40000080000001038064
-:104D70000001870000020A8000028E0000031180FB
-:104D8000000395000004188000049C0000051F80AB
-:104D90000005A300000626800006AA0000072D805B
-:104DA0000007B100000834800008B80000093B800B
-:104DB0000009BF00000A4280000AC600000B4980BB
-:104DC000000BCD00000C5080000CD400000D57806B
-:104DD000000DDB0000007FF800007FF80000193EA6
-:104DE0000000350000001900001000000000000065
-:104DF00000000000FFFFFFFF400000004000000037
-:104E000040000000400000004000000040000000A2
-:104E10004000000040000000400000004000000092
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E40004000000040000000400000004000000062
-:104E50004000000040000000400000004000000052
-:104E60004000000040000000400000004000000042
-:104E7000400000004000000000007FF800007FF8C4
-:104E8000000005C700001500FFFFFFFFFFFFFFFF49
-:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
-:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
-:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
-:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
-:104ED000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
-:104EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
-:104EF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
-:104F0000FFFFFFFFFFFFFFFF400000004000000029
-:104F10004000000040000000400000004000000091
-:104F20004000000040000000400000004000000081
-:104F30004000000040000000400000004000000071
-:104F40004000000040000000400000004000000061
-:104F50004000000040000000400000004000000051
-:104F60004000000040000000400000004000000041
-:104F70004000000040000000400000004000000031
-:104F800040000000400000000000100000002080F1
-:104F900000003100000041800000520000006280EB
-:104FA0000000730000008380000094000000A480D3
-:104FB0000000B5000000C5800000D6000000E680BB
-:104FC0000000F700000107800001180000012880A0
-:104FD000000139000001498000015A0000016A8087
-:104FE00000017B0000018B8000019C000001AC806F
-:104FF0000001BD000001CD800001DE000001EE8057
-:105000000001FF0000007FF800007FF80000112E73
-:105010000000350010000000000028AD0000000076
-:105020000001000100070205CCCCCCC5FFFFFFFF4B
-:10503000FFFFFFFF7058103C000000000000000060
-:1050400000000001CCCC0201CCCCCCCCCCCC0201F9
-:10505000CCCCCCCCCCCC0201CCCCCCCCCCCC0201BA
-:10506000CCCCCCCCCCCC0201CCCCCCCCCCCC0201AA
-:10507000CCCCCCCCCCCC0201CCCCCCCCCCCC02019A
-:10508000CCCCCCCC00000000FFFFFFFF40000000B4
-:105090004000000040000000400000004000000010
-:1050A0004000000040000000400000004000000000
-:1050B00040000000400000004000000040000000F0
-:1050C00040000000400000004000000040000000E0
-:1050D00040000000400000004000000040000000D0
-:1050E00040000000400000004000000040000000C0
-:1050F00040000000400000004000000040000000B0
-:10510000400000004000000040000000002625A0F4
-:1051100000000000002625A000000000002625A0B9
-:1051200000000000002625A000000000000E023252
-:10513000011600D60010000000000000002625A087
-:1051400000000000002625A000000000002625A089
-:1051500000000000002625A00000000000720236BA
-:10516000012300F300100000000000000000FFFF1A
-:10517000000000000000FFFF000000000000FFFF33
-:10518000000000000000FFFF000000000000FFFF23
-:10519000000000000000FFFF000000000000FFFF13
-:1051A000000000000000FFFF000000000000FFFF03
-:1051B000000000000000FFFF000000000000FFFFF3
-:1051C000000000000000FFFF000000000000FFFFE3
-:1051D000000000000000FFFF000000000000FFFFD3
-:1051E000000000000000FFFF000000000000FFFFC3
-:1051F000000000000000FFFF000000000000FFFFB3
-:10520000000000000000FFFF000000000000FFFFA2
-:10521000000000000000FFFF000000000000FFFF92
-:10522000000000000000FFFF000000000000FFFF82
-:10523000000000000000FFFF000000000000FFFF72
-:10524000000000000000FFFF000000000000FFFF62
-:10525000000000000000FFFF000000000000FFFF52
-:10526000000000000000FFFF000000000000FFFF42
-:10527000000000000000FFFF000000000000FFFF32
-:10528000000000000000FFFF000000000000FFFF22
-:10529000000000000000FFFF000000000000FFFF12
-:1052A000000000000000FFFF000000000000FFFF02
-:1052B000000000000000FFFF000000000000FFFFF2
-:1052C000000000000000FFFF000000000000FFFFE2
-:1052D000000000000000FFFF000000000000FFFFD2
-:1052E000000000000000FFFF000000000000FFFFC2
-:1052F000000000000000FFFF000000000000FFFFB2
-:10530000000000000000FFFF000000000000FFFFA1
-:10531000000000000000FFFF000000000000FFFF91
-:10532000000000000000FFFF000000000000FFFF81
-:10533000000000000000FFFF000000000000FFFF71
-:10534000000000000000FFFF000000000000FFFF61
-:10535000000000000000FFFF000000000000FFFF51
-:10536000000000000000FFFF00000000FFFFFFF34F
-:10537000318FFFFF0C30C30CC30C30C3CF3CF300A4
-:10538000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FF
-:1053900030EFFFFF0C30C30CC30C30C3CF3CF30025
-:1053A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D9
-:1053B000305FFFFF0C30C30CC30C30C3CF3CF30095
-:1053C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B3
-:1053D0001CBFFFFF0C30C305C30C30C3CF3000141B
-:1053E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF29A
-:1053F000304FFFFF0C30C30CC30C30C3CF3CF30065
-:10540000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6D
-:10541000302FFFFF0C30C30CC30C30C3CF3CF30064
-:10542000F3CF3CF30010CF3CCDCDCDCDFFFFFFF748
-:1054300031EFFFFF0C30C30CC30C30C3CF3CF30083
-:10544000F3CF3CF30020CF3CCDCDCDCDFFFFFFF51A
-:10545000302FFFFF0C30C30CC30C30C3CF3CF30024
-:10546000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DC
-:10547000318FFFFF0C30C30CC30C30C3CF3CF300A3
-:10548000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FE
-:10549000310FFFFF0C30C30CC30C30C3CF3CF30003
-:1054A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D8
-:1054B000305FFFFF0C30C30CC30C30C3CF3CF30094
-:1054C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B2
-:1054D0001CBFFFFF0C30C305C30C30C3CF3000141A
-:1054E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF299
-:1054F000304FFFFF0C30C30CC30C30C3CF3CF30064
-:10550000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6C
-:10551000302FFFFF0C30C30CC30C30C3CF3CF30063
-:10552000F3CF3CF30010CF3CCDCDCDCDFFFFFFF747
-:1055300030EFFFFF0C30C30CC30C30C3CF3CF30083
-:10554000F3CF3CF30020CF3CCDCDCDCDFFFFFFF519
-:10555000304FFFFF0C30C30CC30C30C3CF3CF30003
-:10556000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DB
-:1055700031EFFFFF0C30C30CC30C30C3CF3CF30042
-:10558000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FD
-:10559000310FFFFF0C30C30CC30C30C3CF3CF30002
-:1055A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D7
-:1055B000305FFFFF0C30C30CC30C30C3CF3CF30093
-:1055C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B1
-:1055D0001CBFFFFF0C30C305C30C30C3CF30001419
-:1055E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF298
-:1055F000304FFFFF0C30C30CC30C30C3CF3CF30063
-:10560000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6B
-:10561000302FFFFF0C30C30CC30C30C3CF3CF30062
-:10562000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A6
-:10563000056FFFFF0C30C30CC30C30C3CF3CC00060
-:10564000F3CF3CF30020CF3CCDCDCDCDFFFFFFF518
-:10565000310FFFFF0C30C30CC30C30C3CF3CF30041
-:10566000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DA
-:10567000320FFFFF0C30C30CC30C30C3CF3CF30020
-:10568000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FC
-:10569000310FFFFF0C30C30CC30C30C3CF3CF30001
-:1056A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D6
-:1056B000305FFFFF0C30C30CC30C30C3CF3CF30092
-:1056C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B0
-:1056D0001CBFFFFF0C30C305C30C30C3CF30001418
-:1056E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF297
-:1056F000304FFFFF0C30C30CC30C30C3CF3CF30062
-:10570000F3CF3CF30008CF3CCDCDCDCDFFFFFF8ADA
-:10571000042FFFFF0C30C30CC30C30C3CF3CC000C0
-:10572000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A5
-:1057300005CFFFFF0C30C30CC30C30C3CF3CC000FF
-:10574000F3CF3CF30020CF3CCDCDCDCDFFFFFFF517
-:10575000310FFFFF0C30C30CC30C30C3CF3CF30040
-:10576000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3D9
-:10577000316FFFFF0C30C30CC30C30C3CF3CF300C0
-:10578000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FB
-:10579000302FFFFF0C30C30CC30C30C3CF3CF300E1
-:1057A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D5
-:1057B000305FFFFF0C30C30CC30C30C3CF3CF30091
-:1057C000F3CF3CF30002CF3CCDCDCDCDFFFFFFF6B4
-:1057D00030BFFFFF0C30C30CC30C30C3CF3CF314FD
-:1057E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF296
-:1057F000304FFFFF0C30C30CC30C30C3CF3CF30061
-:10580000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA69
-:10581000302FFFFF0C30C30CC30C30C3CF3CF30060
-:10582000F3CF3CF30010CF3CCDCDCDCDFFFFFFF744
-:1058300031CFFFFF0C30C30CC30C30C3CF3CF3009F
-:10584000F3CF3CF30020CF3CCDCDCDCDFFFFFFF01B
-:10585000307FFFFF0C30C30CC30C30C3CF3CF300D0
-:10586000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCC
-:1058700030CFFFFF0C30C30CC30C30C3CF3CF3CC94
-:10588000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEC
-:1058900030CFFFFF0C30C30CC30C30C3CF3CF3CC74
-:1058A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCB
-:1058B00030CFFFFF0C30C30CC30C30C3CF3CF3CC54
-:1058C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFAA
-:1058D00030CFFFFF0C30C30CC30C30C3CF3CF3CC34
-:1058E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF88
-:1058F00030CFFFFF0C30C30CC30C30C3CF3CF3CC14
-:10590000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF63
-:1059100030CFFFFF0C30C30CC30C30C3CF3CF3CCF3
-:10592000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3B
-:1059300030CFFFFF0C30C30CC30C30C3CF3CF3CCD3
-:10594000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0B
-:1059500030CFFFFF0C30C30CC30C30C3CF3CF3CCB3
-:10596000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCB
-:1059700030CFFFFF0C30C30CC30C30C3CF3CF3CC93
-:10598000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEB
-:1059900030CFFFFF0C30C30CC30C30C3CF3CF3CC73
-:1059A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCA
-:1059B00030CFFFFF0C30C30CC30C30C3CF3CF3CC53
-:1059C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA9
-:1059D00030CFFFFF0C30C30CC30C30C3CF3CF3CC33
-:1059E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF87
-:1059F00030CFFFFF0C30C30CC30C30C3CF3CF3CC13
-:105A0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF62
-:105A100030CFFFFF0C30C30CC30C30C3CF3CF3CCF2
-:105A2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3A
-:105A300030CFFFFF0C30C30CC30C30C3CF3CF3CCD2
-:105A4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0A
-:105A500030CFFFFF0C30C30CC30C30C3CF3CF3CCB2
-:105A6000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCA
-:105A700030CFFFFF0C30C30CC30C30C3CF3CF3CC92
-:105A8000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEA
-:105A900030CFFFFF0C30C30CC30C30C3CF3CF3CC72
-:105AA000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFC9
-:105AB00030CFFFFF0C30C30CC30C30C3CF3CF3CC52
-:105AC000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA8
-:105AD00030CFFFFF0C30C30CC30C30C3CF3CF3CC32
-:105AE000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF86
-:105AF00030CFFFFF0C30C30CC30C30C3CF3CF3CC12
-:105B0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF61
-:105B100030CFFFFF0C30C30CC30C30C3CF3CF3CCF1
-:105B2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF39
-:105B300030CFFFFF0C30C30CC30C30C3CF3CF3CCD1
-:105B4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF09
-:105B500030CFFFFF0C30C30CC30C30C3CF3CF3CCB1
-:105B6000F3CF3CF30040CF3CCDCDCDCD000C0000B9
-:105B7000000700C000028130000B815800020210B3
-:105B800000010230000F024000010330000C000051
-:105B9000000800C000028140000B81680002022062
-:105BA0000001024000070250000202C0000F000086
-:105BB000000800F000028170000B81980002025082
-:105BC00000010270000B8280000803380010000002
-:105BD0000008010000028180000B81A80002026021
-:105BE00000018280000E829800080380000B0000F4
-:105BF000000100B0000280C0000580E80002014002
-:105C000000010160000E017000038250CCCCCCCCAE
-:105C1000CCCCCCCCCCCCCCCCCCCCCCCC00002000D4
-:105C2000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C300000002000CCCCCCCCCCCCCCCCCCCCCCCCB4
-:105C4000CCCCCCCC04002000000000000000000000
-:105C50001F8B080000000000000BFB51CFC0F003B9
-:105C60008A59051918AC84117C7A607E4ECAF43BBF
-:105C7000F232303803B12B103700F1616E06862303
-:105C8000DCC4EBBF2C8F6087CA32303402F11E694E
-:105C900006063B3984B8B90203C30A203F0B2AF633
-:105CA0001E4897CA53E6EEC182B55531C5349411EA
-:105CB0006C1D2CF2C858174DBE5D1995AF4740FFBB
-:105CC00040E32C1D54FE742D08FD4D1B4267A3C9F3
-:105CD000CF80CAFB40FD95A383DD5C5F22FD9DCA9A
-:105CE00082CA8F47E3B731A2F2CD3850F94950F557
-:105CF00000CDA28F7AC80300000000000000000061
-:105D00001F8B080000000000000BED7D0D7854D5BE
-:105D1000B5E83A73CEFC25672693908409093009CB
-:105D200021441B700C3F0D16EB097F8636D70E14ED
-:105D3000696C150744881048A4D6874FFD3291003E
-:105D4000E17F504B43413CFC29BD97B691A2A596FB
-:105D5000D2019F165BDFF782CF7AB5B5BD23A5F8D8
-:105D6000539498774BEDBBDEFAF65A7B9FCC3927DC
-:105D7000332448BDED7BEFC6AF3DEC73F6CFFADBC5
-:105D80006BAFB5F6DA7B9C0E37148E04F818FF6EF5
-:105D900000F81715000A524FA70762D9D700E4E6AA
-:105DA0006BB16415C0D07C2D0113D8FB802BE49619
-:105DB00052ED8CE789DC9941ACD75EA00581F5D125
-:105DC0009E3B0FA2D857B411A01040F100FD19F569
-:105DD0009D81391EA8A2577FF9D8F82E03AC0994EB
-:105DE000E5603B7BFF003AC04473D90160F4C9DA37
-:105DF000790D78CBD98B7C80AC090EFDC652067725
-:105E0000B99EC0727688C1CDCA274A5FF08C62788D
-:105E10006CB8DE117653EBBB012601ACC4BE42EC7C
-:105E2000FDD884F8AE84B13C433ED4E662E5EC7222
-:105E3000A0FABEB1B1848BDA696A116B1700DE2E4D
-:105E400050B9B81EC601E468AE145CBC1EE19F2DBB
-:105E5000EA79CAADDFB361D307B21F4B4988F8585E
-:105E6000FF35EC7BA5E97BE5CCB7B0DF6C30B563E3
-:105E7000786CC37F14017C0E7CF9E7B0F3CFC26766
-:105E8000910E303D0F60727FFAA5E81623FE027076
-:105E9000BE78A1EF8FF8E0117CB8717AB2C1C1F081
-:105EA00056A73800F19E297FE4296374DC7C4A26DA
-:105EB0003A6C6E60FFC7BE6FAE73E8B152C2B3BE3C
-:105EC00088B51F29F0CC9BF8B2842C5AD7CACAEEE9
-:105ED000FE747687131ACA891A8E513F6EF66E08C1
-:105EE000932B77490FC9CDC81A464FA4CB031CEF9B
-:105EF00018FBEFE3B2143DDD063DA758E9E916F4BF
-:105F0000CCBBC74A47770DA3A31FBF5BE9A8E33FFC
-:105F100018BD1619742C80D144C7581ED177B0749F
-:105F2000CCB5D13160D031966C5050FE908E0CDEE5
-:105F3000AD9A03B259B9F735B72E23DD625A77907F
-:105F4000D5574563B586CBD16601D77AA4DF18FA59
-:105F5000E4700419BFAABA343E6F121296B3AB7440
-:105F600092772F23CB905294575552183D37563283
-:105F7000790D119C92A3A63F5CEC8FDA6F64F0A8B8
-:105F80002678367ABA3C122B6F63F0C624AC76388A
-:105F9000807269E0ED0E392CF45682593679E7703B
-:105FA0001AF06DD3F87C36C141EFA1BBAB436270F0
-:105FB0005E9CE1800DD2C0FD6EEDEBC7DABFBDDFA8
-:105FC00001E14B06BCE50CBF8B2FCAE10D8C3E1BDB
-:105FD000435D1D28E75BA7737CFBF3F90AC7EBE978
-:105FE000F1944F308D17EEF104D2EAB72B1C0772F3
-:105FF000AD78D504BC81AA2B1F07020B4622FF33C4
-:10600000F1E3AF067F88C16FA293B73C2061FFDE4A
-:10601000B10F7B80E6FD610FC2611FA71FBCB67187
-:10602000EDE32895314DA1924D1F057400937EA19B
-:106030003A217C727D921DB6EA196FA54DBF84ACE2
-:106040006545E81BC5A66F3EB0EBEB0983D4335A18
-:1060500023C11B12708198CFA3C47C9E762819F4AB
-:1060600030FA95EF32F4F5033FAF64F27040E8EB9D
-:10607000039D407AF64017D3D734AFB9BE1EC7414F
-:1060800083AA6FBEEC40FCF7F6E91B2B7DCAE2DA6F
-:1060900054D43BE5F1B003FB29DBC4F54D59478BE4
-:1060A00003F9344EE82D38CAE9E061FF99F5759996
-:1060B0001867D42E2B1DCB90BEAC5DD511DBFB1A1F
-:1060C000BEEE958189AE6CBCADF80F46AF6112A3F0
-:1060D000E367D8BF474305D171CA20D73D4147BBCD
-:1060E000BE2EC3B147313A3ECAF435C36F6480D384
-:1060F000B1BDC3010ED48FBB1CA41FC794461C584E
-:10610000CFD0DB0234A814F8EF13EB9D01E7A8070A
-:106110007A6A51B99743CF0937EB27771384132154
-:10612000D4D325B538CEE371AEA7CBE3E0889AECA3
-:10613000A15C01CFE3D37B5F1CC3EAF5C69530A217
-:10614000B91F420E4F698AAEC67A3B52C8E93F601A
-:106150002D931CDAF93852C8A59D3E6374ABFC96AA
-:106160003F6AE3C7266B79A44DAEEB0D7E18723DF6
-:10617000487EB81588B9F3B0AC937DE761342A60E6
-:1061800065F907CF6928D76A277F97DBE1D04B995C
-:10619000DCFADA7959E950F45A36EE6D6880B1F2DA
-:1061A000E818E86897CAD33548327A8F0E244066DB
-:1061B000EF474E87B06C9A2F869D69F06F94A0DFF1
-:1061C00028616FE43CD8EB45397F3CC0E88E7C7F8A
-:1061D0004011ED7BBC91B129BADBF5C3571AAC7401
-:1061E000BF39926DA1D7ACD0104B79FCA96197E46F
-:1061F00093A13F0C3932E8D68F0F312BDF7CD3AD22
-:10620000DFEDFAA74DB2E99F41F2C975122AD18E8E
-:1062100019E3C80AEF2DED5FEF61C921EC218F7EF4
-:10622000968DB70024C861FD2F87E408A4F7513587
-:1062300044DF5738928558BE003DDB878F4AF53FD3
-:106240004281A3520E53DA8CBCAB1848C33C90C8B1
-:1062500026BB18229E422201D14562FFBB95E44530
-:106260007120BD8A03FC3DC472142C07C1F80B5980
-:10627000ECC4A2552FFC5962F353124F19F9C8C64A
-:10628000774294E4C103712A6741173D55E8A6A7F8
-:106290001F7AE819808084CF3C08D313AED69F4A7A
-:1062A000901E7D2040F4F4FE0E3ECE4EE1B346F04B
-:1062B0006D1844BE2F4D443E24C023A7E4D02BE6E6
-:1062C00037B3D7482F7B2A99FC96A27FC0D6D52A10
-:1062D0009AFFDC9F99DE134379CE51615884BDDF6C
-:1062E000D81A20FDBCB9D543CF0EA16F4AAE796153
-:1062F000C71DEC9F8F8CAD79732F7B9E68DBAEA1A1
-:106300005DD33196EB97A1D3BBEB46A19D58AF70FF
-:10631000BBB09DDBAD39825A1DA393FA6A567FCB81
-:10632000DD9EB0797D31F4D096EB9307F7B1EF7A2B
-:106330004B167DD7A70B7BEC23C67FC30F42FA8594
-:1063400005DFEA136487B2F7311FABEFF990213F05
-:106350009E7D0FF6B4A6D33F1D6559A4FF3A4EAEFD
-:1063600087105BE7435A4C23BB760A33594BC9BEAF
-:1063700075C4AA70F6457F2531FAE6C40292A622BA
-:106380007D40C2761E740891BE4A3C68B657FBFA3F
-:106390001F1E0B2E64FDC5AE77850F90F88063DE5F
-:1063A000D8CC72BFBEEDDEAF6A69EC27BF4322FED8
-:1063B0009EBCBEB008FD5D17048AB227E03C72C1E6
-:1063C000015C9FAE5F3C329AA65D6A3E19F651FAB7
-:1063D00067A6766E195ABA4CFD963B1CA42FC1E1F4
-:1063E000A1676E09979750A5909B18687A1A3BF39E
-:1063F000F3027E8F128380B0A73F4D7ABD2D713896
-:10640000D74BD0D095061E1DE19988F3A02986FEB2
-:10641000404E1B9757A6B534AC1F52F8D3A87FA3A4
-:10642000A8FFA4C0E332F44DE1A3386FF307A9EF4E
-:1064300070DC34F884C5F89733EED651688C062C9E
-:1064400074B7F3B36F7C8797EA5DBC7E7B10FDE782
-:106450004C70865A58DDA1EC592F9E55E25949BA25
-:10646000BDDF7897DBDF144788F0B4F70BFBB9FD8D
-:106470009423D6A913935D34CF873F00229E62D523
-:106480001BC3991F89FA4D3FC8167809F5062F3F9F
-:10649000B61FC89EEABDE721B23B4B50AFCA18E712
-:1064A00088D23C2E8510950DFDB616F51D7B5E84B9
-:1064B000C82D8E02D42B5D27515FD64FB87B6ABAA8
-:1064C00078D11DC6FCB88CF5E8F3ECB9C013B9134C
-:1064D000FB57C3A735B66243EE5C29969DD37F5E1A
-:1064E00031F10CCE31CF873EB9E0F3A91DE5BD8A6D
-:1064F000CF9BD9AC5C579E1E4EBDED6291B0FB8622
-:10650000917FA3C0B039A6F9A83FC8E6156BF7B8CC
-:10651000E8CF78BF5DE017FB04F3A08E3D03615D1B
-:106520004375394F6F7122DF6E96A26B10EFB9F58C
-:1065300091E791F5EAC16E2D2B44EF3B1C6C9CBAA0
-:10654000501C3907AAD61DC3E763F72CD4908FBD22
-:106550004C67C969FC66E399A539AC7E92DDEF1BF7
-:10656000E47CBC3A1C9F8A765865C3891388EE0286
-:106570004F7427C23524F2945680F0864E6B7926EC
-:106580007E8D14FC5AE6E0F8E73E20F8A66841E468
-:10659000C75D10D98BED039AB0BB07094726F947B1
-:1065A0003B13E93812E59DE9CDF63093F7D2D47C60
-:1065B000C811F3A15DCC87DE095CFEDB03D58174D5
-:1065C000EB8521EF86FC1BFAD05E2FF109E4FC2A53
-:1065D000F6AC8000F9311721FADF900E0C7BB26B1C
-:1065E00072A777913F67CCABFAF0E9E943183EEA2E
-:1065F000845035D2DF18F7BC90BB051EEDE7241F91
-:10660000E56D4A1EC36BCC3D101EC5EACD2ACF9561
-:10661000CCF2FE6A5FFDC8699A5FF7746B4A68E066
-:1066200076FF43E077B31479CD2C87AC9F5F615937
-:106630000D75A384F5D13924EC7BB96D21D90F4CAC
-:106640003E0348E7792D2DCFE37873AB226BB0BEC4
-:10665000D1FFAC90CD6E97A26F61BF7639AD83B894
-:106660000297B17E8C94A217B09FFA5037C19B3B22
-:106670003D4272C6E0FEE05382FB2F48D74C70BF0C
-:10668000858D516F86F7905E63F0C9328363F403A2
-:1066900009258FE87E5A41BA333A3BE582149D07BB
-:1066A0003BCFB7897936D07C6FC77F4C46BB383A31
-:1066B00004C7CF13762E244F00F7AFAC71CA19F27E
-:1066C00079403B2BB72E09181F1A724A0EDFC83EBD
-:1066D0000DAD0309ED62C38ECD13F3D180674B9FDF
-:1066E0009D1CA4F933444D06232ACED74964B73DF7
-:1066F000529B0CA29FB7B63544DF033593D6DF110A
-:10670000C2E1A304C786D6B0B0AF6BE819AFEB3DCA
-:1067100085FB025B820EB27F37B5561A71598237FC
-:10672000CFB093EBCE909DDC1BCC127EA315BE7830
-:10673000DD19CBBE87D10E82A6385619F623ECEBB5
-:1067400010D73703B5574BAC74EF6BAF0DAE7DD69A
-:10675000046BFB5A2DD981F1C400C68F100FA1F72D
-:10676000FC02C6408D83FC6483DE9E2A6B1C2E5E79
-:10677000977E1FA76F5DB08D07E559A932068B6222
-:106780008D04DF4A015FA67ED6887895517666D063
-:10679000934DB25827C57E5440C0FA88C6E8A1A6DA
-:1067A000E83144C8DD967AEE874180C7E70C3FC7E1
-:1067B00009FC7B6A3C8E379549DFC7F83836F88D7F
-:1067C000F62ED13E131C2E7B7F67593F934CFDD88C
-:1067D000E0CC049F7D7F0CDEB6F693597FD9DA9D1D
-:1067E0001F1C1FFAB503133FA99C672B0FB3D52FAE
-:1067F000B37DBFDAF6BDDA56BECE567FAAADFC0534
-:106800005BFD39B6F2576DF517DABE2FB57D5F69BE
-:106810002BFF576BFDAABB3E197DFF3FA39331AF02
-:10682000FAD345B7ECEFDAE75519244624D8736F4D
-:10683000EE4B8BF1D3BFC892728EFB243C8E058940
-:106840007111933DFE7B357A06D7B1BD1F6959A8FA
-:10685000F7F7C75FF6A33E32DE9F97DEF05F156263
-:106860007AC19558C1E33E719A3759A09C49562286
-:1068700097248A9779D44544724F397B6FD26F6ED3
-:1068800088109F5D25D6F710E7F3B01C7D7AD65FA0
-:106890006C9B8BECC15811E8A3315E94CFFBA7FA37
-:1068A000652978AB15AE9F8291782DCEE1610D5DA3
-:1068B00027F069A753705AECDA1730DEF008F7CBEF
-:1068C000F7CFB0FAD5B728DC0FB94DB96CBFE0D51A
-:1068D000F172AAFFFD0FAAE13656653F02C1CAB1A7
-:1068E000073D3AC63746605C8E6F1A505C6E38883A
-:1068F0003F117F2BC17FB376C3D55314670B350689
-:106900004EA2CE9BA354D0788F4B3D57E1788EECAE
-:10691000F3D7F2FDBCBF7C4CF17741AFE0C649C96B
-:1069200018A3176C758547139DC34467B702EDEE36
-:106930006A14134EDFD5ECB578AFF8F2D06D12FCC7
-:1069400040FD3B0AF7B575E0FE6482CA3E48523905
-:1069500047D8B9639452EE17083F9379F612FA5F5D
-:10696000C12F32BF3CCDFA315BAA1DA314A4E29320
-:106970005288C721A54D2FFC59C278572584F8FEAF
-:10698000948807AE97A58F311E1E18DCFE4EF06B63
-:1069900056BE821285D92679FE5A1F3F39BD46055B
-:1069A00039FEC1ADAE16F46BF6CFB2CA81515F5657
-:1069B0002E3B5EB17DDCA84F4F0E729551044F7F88
-:1069C00039B83580FB07528CD12D7BF074CB91B553
-:1069D000AF2A13114FA0F22149BB5529489515D074
-:1069E000E69BBFBF2A4716E0F7D854A86C5153FD69
-:1069F000B0F78B32BC5F92EE7DA961B79EE5EB7874
-:106A0000B1B0AF86B6C7C92E2D6ACACB32DB59C525
-:106A1000625DD8D3B4D08BF86E6F48AF078DE74670
-:106A2000E1F765AAA74A5D11D42B3056810369ECC2
-:106A3000F26751BE4DFA54ADB2DA5BD317C56AB1F5
-:106A4000BDBFCE01B86FC2D679B2EF8A842E7B78F3
-:106A50004A4CC2BC97F872083FC4F0F22F2AF3A642
-:106A6000B3931ED6B6D3FB1DF5876791DFC2EC3A10
-:106A700099E2E25DEBB13CA4C6011BD2EC173C21CC
-:106A8000F0DB5CCFE964FF5EE18268BA79F8AC22A2
-:106A9000F61994980485A9FD92274E147DA192C100
-:106AA0005B1C7684BDA1149CA57D765382E855516C
-:106AB000AD0430DF80297E8BBDB9A3BD7AC71D68C8
-:106AC000B7B3F768B7EFBC3E300CD78D3DB515B303
-:106AD0001A517FDFE980D1A1141C633AADF43CD197
-:106AE000373FADE3B27E6BC97FAA67E44A43872B89
-:106AF000A547A71837939CD8D755BB1C5CCEFA7016
-:106B0000937CE5F8FD00E7E144921F8AD30CAD6762
-:106B10007E5C556A1E197E8A5DCE02750B49CEB623
-:106B2000D7977911CFDEBA6AC9C5EA6DC19A69FCF7
-:106B30007163BC4CF05438A3DE00CDC385523ABA21
-:106B40001546D3C7CF35A7883F2B5109DB67AA3736
-:106B5000C229E441CCAB4231AF82535AE6D0BCD813
-:106B6000A5C0438C5E0FD755B78D26FA3948EEA6DF
-:106B70006B5CCF164EE0FB993E46AF67D9BAF7483B
-:106B8000038413ECFD23135C96FD9942411FBB3C2B
-:106B90003E32807E01B3FFC5E45F71AA7CFFB61C64
-:106BA000CAD19E7AB8EED2ED074BDF608343D39112
-:106BB000BF35D503C44DDA2E779D9A773DCA63CD94
-:106BC00020F3276CFA029EBB6BFD68C607DF2EA67A
-:106BD0002F201D7D5C167F7C207AD8E93F0EE99935
-:106BE000FDE9D1D3FE7D8853C40107498F27EBCB44
-:106BF000B6968732D7B7E363B4DB28E6DBE7A14775
-:106C0000C6F9AF4180E24B53214CCFE910A167B7E1
-:106C100012FD9293D59F092D5436E2508D0ADF97CD
-:106C2000802A3EAEB1BFAD4C03B293C78C077D2F17
-:106C3000EAE72973C4A6AFA29DF3A0D1C6E048E35A
-:106C400057013C447817DBD663234E31B4295E5F8D
-:106C5000CDFA2DAE77501CA3B8E6B0D7BC2EFBC53D
-:106C6000FC31FADBC9BEE3FABCB36970FC32EA3D21
-:106C7000A12429AFEB899A87DA70B951F2DE0EA60A
-:106C80006B6FA7EB968FBABC9134F0EC5C7494F206
-:106C9000B776D65C3A8E3290DC8C91D3DBB39F779B
-:106CA0007B896E3B733DB7F0E49C5596FC0390D511
-:106CB00052F3B83B3F82DCC8A5F489669D2F5B9CEC
-:106CC000221FC4073E94FF4CF4309E9F361D9E9CAD
-:106CD000DAB23492A67D859BDB136B722186F92292
-:106CE0004FBEAEE898DFC00496E471D22D211DEDB1
-:106CF00097355EAE979FAC05FA3E29577C7F2C44B2
-:106D0000F954C59D1073B1F5ACF8B5458FE4B27A6E
-:106D10009B16310FB234F57E53F86407EE133FF340
-:106D20008A2380F6D1246FC2136678D5887570E700
-:106D3000A29394771CDBA58447937E97409A44DE08
-:106D4000BC25AE79DCA910BC3BC30F7B716F6E47CD
-:106D50002849FD7C63F2494F88E1B7A9A4DB837819
-:106D60006EAE7998D6CBC38BCABE5C4164B5E6974C
-:106D7000CC94A7746B98BFBB88EF5BE426BB3D98AF
-:106D80009FE46F50E046069F5FE5F86E5A033AAE07
-:106D900053D5228F4482D9E41717D9F2B80A6D79F6
-:106DA0002681F0CC77709F9FF6FF1109B9E991B168
-:106DB000184F6C7688F4538DE6A94FE0E70B6B54BF
-:106DC0007FA67CCC8B790B3BDA9500AE7F015BBF55
-:106DD000763C02103DA149D40F8DB3E351BE4E065F
-:106DE000265266316B2AE00E30B887B021DBAD70D9
-:106DF0001B74B58FE3B395DF36E4B91846A31E3292
-:106E0000E2CE06FC76B9CD9FA41F7999E1BBF315BC
-:106E100095D6EB9D352F7FAD19D7F94A37E5717DB2
-:106E2000E1E2C1A6EFB3E72F3E385A8ECF2F16ED21
-:106E30009FD08C74107912463CAF107B26FB55E82E
-:106E40003563BCAA3DEDCE7C7A45F9159B4FBEDE7D
-:106E50008871E7A22620FBB748E1F2E96B77E86D7D
-:106E60000CFEFCEBE2240FC50D09025A6DE892629C
-:106E7000267B5E15F69CAF292AE13EFE8D0D712F13
-:106E8000E68BF844FCD737214E76D20CF90D4F52E1
-:106E90004DF1CFC87F37E69F9D3F158B78DE497156
-:106EA000BB1246B08B9B5A1C6487D7F07CEF8ACE0E
-:106EB0002E89FB7F3C9F9E87D4D933D2C8F30977B4
-:106EC000713BDDC8FFF63759F917E8CB9F8FD2BE6B
-:106ED0006B69A7ED7BA4EE2D2E87567E96B9043FF5
-:106EE0002B44FEA0CD4FDBDC24F6E9548F7E29BB7A
-:106EF000F6159187F32AE23FA6FFF79B33E8DF9B65
-:106F0000DC7C9F5F767477901F779D83FC383B1CF9
-:106F10005B9AB8DEDBEF7258ECF82B1DFF36A1FF51
-:106F20006547F26F327E531FFE7F9BF1EFFF1B8F91
-:106F3000BFE16F4CFF1D7F63FC0FFE07E33FAF52C5
-:106F4000B2F8697B5D1EEAEF87EEBEBC0D8BFE9644
-:106F50001DE9FDED332E87258FD8C84B9CD6A02D7B
-:106F600070A1BE0CF3731EF6FE66C82F75A01EDC62
-:106F700021F2B1991ED564CC779A6C9CD3E0FAAF1C
-:106F80004EE8BF3AA1FF0E67D0ABD5355CBF33FBEF
-:106F9000420F95E292119F5581EBF72985F28B0FF5
-:106FA000035B6650AF85DC69F3B10B05DC767D5A77
-:106FB00028F469F54BB6F7428FDAD7F9D2BEF82933
-:106FC00050FCF4BFBB447EA94DAF1A74D851C3ED39
-:106FD000E5FC39E9EDC14D363EAA135A280FC1CE62
-:106FE0008F332EEE5F1BFC58E0D17EED2AC8CCEF2C
-:106FF000A4E0F70D82DFBF7405E869E48D64E277F1
-:107000008D9B8FF359DFD9601B6213A9253EC8827F
-:107010004F326CEAA6F82F7C03CCFEE5968F981DC4
-:1070200082EBBFAA52FCECB3F9E03092ED3F32F6AE
-:10703000E9D89FB39BC751E57C97CDDFB2DBC11E7A
-:10704000CA8FDBA9F1F3563B6BF6EE5C81EBD32BD9
-:107050007C9F79676EE74B78F40DE2E31584C3B04B
-:107060001B41C467D1A4E0F928F6FD27ABDDBFF3CF
-:10707000A3AE04DA5F815229CC3C2BE8083D9C9FEB
-:10708000F63C9ECDDE57DD3E8BBF0B370ECE6E5FDE
-:107090002DF8CDFCC502B7697EAFF6CD1CCFF3A2AB
-:1070A000A607709F47D2663A309E9EA91F8CF49E19
-:1070B00033ED3B352ADA70EC4F42FFB132E53F0247
-:1070C00094F0F8BC81FF60CF0D34DDC5F7BF055DDE
-:1070D000F3AFEBFAABF891469CD7A8A72A094877FB
-:1070E0003EC81EB7BBD1A94D46FC060BFF6E143837
-:1070F000F6FCE72AB92E5DFC2029F4AB1A79EAC523
-:107100009B59D50973251EDF67669B795F6D53BE5A
-:1071100052972EDEF533314F7E894139D2EB09C8C3
-:107120009328AF04102F633EDAC7BF568C7BED1552
-:107130008EFF8A98D7D78A790D10A6FD984CE3D692
-:107140000ABD613C3FE9B8498177AD4BC4350618AB
-:1071500077B6C073F615E27B5E8C3B7B90F82E1001
-:10716000E32DB8C2713F14E32E18E4B8770BFADEB2
-:107170007D8574563C92E86770746E13E3B55DE1EB
-:10718000B801316EDB20C7DD26E8BBED0AE95C22E1
-:10719000C6DD66A373A6F9BBF70AC7ABF4F0F9B373
-:1071A0005FCC5FBB5E33C6578B1C116CBF3368ED81
-:1071B000E78B6E3EBEF184C4C7E4BF168B7DDDC98C
-:1071C0002BEE5DA8A519D7A86F5F8F338DF335110E
-:1071D000AF319EC6387EB11F3AF93A364E1AFA18C8
-:1071E000F5AF75713D98A9FFA5029EA597898751B6
-:1071F000BF16FB9F98B9FFFB041CF7D9E01FA87FBF
-:10720000A3FEEC01E0EF1070745C26FC46FD050364
-:10721000F4FF2D01C7B72E137EA3FEDD03D0E709CF
-:1072200001C7139709BF51BF6D80FE9F16703C7D4B
-:1072300099F01BF5B70D409FE7041CCF5D26FC4677
-:10724000FDFD7DF3DD3AFF54E33C50182A31DF7831
-:10725000046485E97E8370F204FA01EA2A7EBF01A4
-:1072600074D9CF4199CE4FB1297EE2BE8A18D6DFBC
-:107270007D178FFBEDBE16C88FD85D20F295455C5B
-:107280004B15F6E0EE6B791C647790E7EF832D5E8B
-:10729000B49BF93BB4EF5BC2F399D5AA3899983403
-:1072A0005CA13011439857C3CF5319F69E71AE6A53
-:1072B000B58853EDD680E254BBAB7879E774D01D26
-:1072C000A5A6F3569509CA4345C316E3B1A9F362CF
-:1072D0001AACAA36E563AC4A50BE8122F246184188
-:1072E000C09297613BA765DCA37073589B816AAE1F
-:1072F0007402DFCF2B8D58FD87263CBCC5EAFF56B4
-:10730000E8C900D64BA3670E7914CE3F91B7395721
-:10731000E06FD0AD5AF073CBEC0FBAA7313C5F9C55
-:10732000E2C44C1678F194A0E31459E7FBE7E0348B
-:10733000EBED3E39CFE00FAA9D2D27BD8C3E37BF28
-:10734000046164A36F97B6264471B58F48FE28AEDA
-:10735000C6C6BD79575C41F99BD5199A86F1C0B96B
-:107360002F8556AB987FDD09610DC9FBD1D7A99F49
-:10737000BC7608EB9C556D01B2736DF139E3BCAF7F
-:1073800088CF61B8DAEC5FCE127857B707D6E0D66F
-:107390005DF574B7C57E9D25FCCC2F696EEB394930
-:1073A00071EE7196CDCFECF458E3756A676406C64A
-:1073B000BFE5B9A7353CF73C26220586B2CFB745D5
-:1073C000B629189F9CB5AB85E7F567B80F23E7B1E1
-:1073D000393EB3FD3E46C8F32F775DDA5E37E20CE7
-:1073E00046DCE114E619BBD14F0F0ABE70B932E496
-:1073F000236FAE6491934E0FD7239D1E1EC7FF4F80
-:1074000039F9EBCAC96F3CD6F843277E63F3B12242
-:107410009C7E9FBED1E3FACFF9FA29F0C1EF4DCFA0
-:107420000768CAB1E4131B795576BA19F7C618650F
-:107430000FA43F8F57E215EBACDDAF7F235A8B785B
-:1074400019711A80FB6DFB9B53C2978A4BC8C6BD4E
-:10745000038E3764C4A7D22BF48F020AF56FC3835F
-:10746000E67D61EA3E1D7B7F6BC4791E032F677941
-:1074700044C37B56D818B4DF8779EB87AB707D0C9B
-:1074800058F0D6BC7CBDD950C9E56D43A5A2679321
-:10749000BC45ADF71695EFF5A4B32B8C2798EFAB51
-:1074A00028EB0FAFAB3C1A33C3E312F0D8FB999330
-:1074B000119E464BFCEB72E1715F05D08D72AB30D3
-:1074C0002926F9FDBAA53F47A54EE7FA33F58367AC
-:1074D00064082F1B5F328DEF29B19E5770E5675905
-:1074E000E45D51F36CF78AD8E4AB2F2E34B8F1EC9D
-:1074F000E718DBC5F9147B7BAF1287701ABA7B43A0
-:10750000F67C0C9DF8603F5FE30CD8E0B6F5BF0950
-:10751000DFA5C9F730EE195A27D6B5F58A4EF656CB
-:107520008C8189F99E6B845C2A019DEE67FAA657CF
-:107530004A8B3F84D3AFB74A797AF83D2556BABB18
-:10754000F2F3AC7C50D29FE7586FCCFBC07ECD7C71
-:10755000BF56FF797E2C7CA9F5BCEF5E2DE937F292
-:10756000C70CA5035EDB3D1683E4AFF2E11080217A
-:10757000A632D3AB18AF657384F279EDF54F1BF4E7
-:107580007B632FC16FE8E9EC5D465EED27C3439254
-:1075900040EC935BDB679C8742CFC942AE9F1F00E4
-:1075A000FF4CFCCD2A77D8E6CBE0F8EBC5798FEB22
-:1075B0009EA2894BB0ACF33ED37810E0F85EEEBCEF
-:1075C000FFA4700EA98B02EA3357300A51B6CE17CA
-:1075D00005E3B44FAE4A3D31F4C7D89C0A219F77EA
-:1075E0000E09F1F3E3A67A53593B67A923E6C43C9D
-:1075F00010089FC0FAB12074617D8CC7ECAD4AD5EC
-:10760000532588A0BCAB054A04DF1BFDE54CB1F651
-:10761000C7CC04D97C1ECBC817205787E1EF9CCC80
-:10762000FC53D6DEC5ECD03DE9F44916B743B39F11
-:10763000F3D279435F44D551248B26E894175CD468
-:107640000861F4E72A3ABB21CA3AFD26C23111BFCC
-:10765000C7E9DE85A25D71DAB7CF77F373EC454DEC
-:10766000716981699CCA2C2EDF53E778689DF87A8E
-:107670002DBFDFA23BB8305E8BE3D5F07D2F5FBE20
-:1076800002C3183D7CAFB9B9FF392109E67B23DE7F
-:107690006E85EA45A301DE6DF5D0F37C6B809E819B
-:1076A0008FFE279DE75B33715208F3472FFA1A4785
-:1076B000E2BAF17E6B90BE6F7E301CC27C22F9E490
-:1076C000EB749F444ADE6332D430BA4D486AC83FF7
-:1076D00013FE7BBDA67DFE3EBC18BE0BD8381B2515
-:1076E000C7ED381E9617929C7A649729FFC325FC34
-:1076F00046E71A883C5585F797E8D2DD55A6F75E30
-:1077000066B7E1FA3A31407C4FD1536F13F4BE169D
-:10771000FDDDA297045DE7D45C72DF64536BA27B4E
-:10772000FAE85459CD70EE6DB673EA0D591837C2A8
-:10773000439F6CBC69732A8722BD1E755ACF931B69
-:107740004F39303E5C8E7563450E9A87E27E959583
-:10775000578586E69AFA9F2DE4523EF923A26F766A
-:1077600015CF0F617FF545A6FCFF926823BFC7AF19
-:10777000859F9331F62147DE9A6CC32D8991ABAC7E
-:10778000E767668AFB504AD73828FFB57432E9505C
-:10779000286D03CAB3DA2787AB51BE1F835772F136
-:1077A000007B09836F389BAAA5316B3FFB16D7BFBF
-:1077B000807100E37E95D5EDBCBF11A1F0A910C684
-:1077C0004FAA1C642F8F84B007FB1FA93A00CF1764
-:1077D0008D02533FAC3CBCC5DAAF1DDE529FC38166
-:1077E000F10E039E1170C4A3E553FFA0B3F625CCA0
-:1077F000CD2B4E039F7D9C5146BDB1D5D509483355
-:107800002EF4B4E1BE50BFF107E8B7354BD8E13EE6
-:10781000F0A33EDF2571FC632FCAE103C8D7BB0F7D
-:1078200052BCA6646527ADEB9D59DCBE5BCBEC0179
-:10783000D589760A7B8ECE2C877280112E87D68FC3
-:10784000B4F2F76456EDD62C8C87654DDD8A7298BC
-:10785000A584BE82FCC83AE504DCC7CCD2E234FF82
-:10786000A09CDB191BABCA7270BE65B5B8D2FA6BAF
-:10787000ED594E826F5796A4605E28932DC24B69D6
-:107880000A7D6B262B7617688FE3387F2E88D2D33C
-:10789000781F5CD81042F99CB6A48AE25FBD9D12A5
-:1078A000C5BFDE927417A66A2F9BDB32EE46468F69
-:1078B000D9B9D127B0DD1239B1D6C9E0597E6B4BA9
-:1078C00005D2A71EF3FD0A70B818F7074BCE841532
-:1078D0003C1756A2249C4CBE3D8193AFF167AC1679
-:1078E000E5DD832761183FFDE5DA3BE837F9C43968
-:1078F00024197A629817E89F0270C6C437F4E9CC5D
-:1079000065DCD3359733D17FA0E722D6F6CC685C0F
-:10791000E5C39A4476814EF47305C2E3104E39787C
-:10792000AAB0DCB4CEB9057EEE690BC5FD489AF06D
-:107930006FC260F66FDD022FD4E1674CED9D416BA5
-:10794000590EFC75F130EC6EE9A7FF7E0EF9B8FA1E
-:107950006927C53DA73DED4CDCC0CACBF748B4CE86
-:10796000388E73BDFEFE7E89E67DC2E7223DF05E65
-:10797000C043E56677F796CFB172CFD332EC25B22C
-:1079800034D07D52E78CF5F4282F2F160ED2F23D1D
-:1079900027E6637F8D47DD80EBC4F21F2DB9E973C5
-:1079A000ACBC84C93156597EA0CD358C95EFD2A59B
-:1079B0002E2C5F980A2467B13C978E792D17FCDD39
-:1079C0008537ABB48E41680CEE6F7717CE65F2B891
-:1079D000547F6A26B65B7A48C2482AC3E3C00B4587
-:1079E0000CAEE5DF91687D5C76309BDFBD22E877E9
-:1079F0008EA17203FBBE92E189FA7009C46722BFAF
-:107A0000961FD8E632AF73EFB65652EA87515EFE44
-:107A10001D360E6BB7E27B5218515C81F90EB85ED1
-:107A2000FEC8DBB04F45FCDA5C153EC46B9D0BEB2A
-:107A30002DD1173CE30D217C7B5C33D9F7A5BBF638
-:107A4000B8165721DDE0765C57971DFC0CBFB3C01C
-:107A500080AB53267F6165AE672FDD6BAADAEE47F8
-:107A6000E9830B2C702D157A83F97D2EF379B76796
-:107A7000B273494E971D942DE318FC8F9D067E1E10
-:107A8000ED273E3A8F66F0CF58AF0CFEAD342EFA9C
-:107A9000537A26A583670BF283C11367FE0D3E1F41
-:107AA0006E0DD2F3D1D610F1693BD2710CCF4BC120
-:107AB000F76CDED6E23D687E0D2F0403C8ABD76AB3
-:107AC000310F332FC2CB85B746A5D025EC74E3B96F
-:107AD000DD195D8046CE94EC6FCF50983FB6DD1532
-:107AE000BD1B43D60165EF8CE96CCD6BCA8E4CCAC9
-:107AF00036EDFBAD15F7275D931D22FCD716B9882F
-:107B0000DEDB6F9BB44FC49F689DDC7EDBE22730D9
-:107B10003ECEDA7F3E1BFD0BB1FF97A97DE1FC1A3B
-:107B20004BFBC2F98D46FB99D4DE73E9F6DBE75FC8
-:107B3000671D7FFE52A3FD4D04BF7A69F80B6F9F4E
-:107B4000621DFFF6266ADFECE6FCEDC9F550BE7556
-:107B5000BB379C407D4C17A94DC07CF28ABD58CFE5
-:107B6000587798E6D7307F5B3D945BBD01CC72348B
-:107B7000753EC28179596639CAA9C9B2CCAB5C2DB0
-:107B8000CF521E5237CC52BF205266F93EB4E16A42
-:107B90009B5CAA747E91CA08141AE60C4ED7301763
-:107BA000E9A3DA61DC0EBEF7B897CAF75EC7F1BB8E
-:107BB00077984AF3186146BFFC5E57F41AF3BDADDF
-:107BC0000C2F093773EE54A3F7211EA9F72107BE26
-:107BD000CF12F94E596E207DB7AE74D2BE98899EF1
-:107BE0001DC3993CB0727BB68BD35DF061DDF0C5EF
-:107BF00041B3BDBE76B8AB01FD0D7C7F878AE345FE
-:107C0000D6E278CDAE9E0AB43BECE3B8CB6A2CE367
-:107C1000784634D238DBB2793CD518C73DA2D1368C
-:107C20008EA761AF782FC67904E52CD338EBCAAEA6
-:107C3000B3E23362298DB3DB36CEBA114B6DE36408
-:107C4000717CD87B318E7EA971DCA3A658F119D93D
-:107C500044E3FC931D9F914DB671541A07DFE3383E
-:107C6000CCF00DE17D592E77CF62E2FF4FBD64E786
-:107C7000B8DCD127C9CEF9B597EC1C564BC37A5066
-:107C8000C9FDDB7BB2F3F8BD5F598CFFAA99CF31F8
-:107C900091771023BFF84E0122E80C22A6DF560888
-:107CA000195C7468F688367C1E9D165C80FEE8A31D
-:107CB0003E8AE3BD7F749AEB8E34FAE8CEB8F35C6B
-:107CC000D224CF7D7A55C46383D97C1FD2289F13D9
-:107CD000F19F33182762CFB79C40FED059112F4A2D
-:107CE000C1DB46EDCE897DBD73BBF83A7571DB69AA
-:107CF00027BF37155EA96270CF1368DC19B7DE9312
-:107D0000D92CF8D1F323373F07045A31DD8FD73907
-:107D1000C4122FFCCDF17F7881E7DD4131DEF7FB26
-:107D2000D58EA79EC76AAF4A0B86AF64F8361CD9BA
-:107D3000E62C66E5F79DC9F961D5D44F8393CEDF74
-:107D40001B7EC82D51A7C57EFE5AA3B57C9BCD9E38
-:107D50007E23BBCCD89FE5E3867427F26B1EEEB181
-:107D60003216DE864F4ABE0B10BFE607785B039ED5
-:107D7000E6FB9D90A0F52E594071CE5801C569A231
-:107D8000C6BA65836FBED3A345183FE7DF27131D2F
-:107D9000EDF0268F676B0EE6E7243BFF9713CFF1DC
-:107DA0000C04FFEDABACDF21E6B4DC4760C8C15783
-:107DB0001A6AF79D35C9C72DD159FBCE5AE834DB75
-:107DC00052BEADE5164BFDDB572DB07C5F10BBCB33
-:107DD000F2FD8E8EBB2DE53BE3F759EA2FE96CB33C
-:107DE0007CBF4B5F6FF9BEECE0364B7979D70E4B19
-:107DF000FDE6A37B2CDF1DC7AFFA12F981BF94E922
-:107E0000BCF31FD5735BD07EFB6340A1FD9CB7C55F
-:107E1000FEDDBBE23EA015287B9371FE8CF7A0DF50
-:107E2000D09CC5E633B325C6A9056B3BA6A01E01B1
-:107E3000BA5AA35A2D5E1B63CEEE64713E51EE74A6
-:107E40004162086EAFA4E2B03D72EABB9264DFC744
-:107E500067FE2E772A69BF2B49256DBF17A49E0A9E
-:107E6000B41F63AFBBD39E034FCD4B28864BDC2F93
-:107E700079DE018D66FF6D9ECAE3432F644F9DA797
-:107E800016D071699AEF4D878BA6A2DFD0E44A54D1
-:107E9000A4DBB7E91BAF4BA27B03E7A97CBEDCA543
-:107EA000175BE269CB0E8EB2CCFBD7B2A237ABAC7C
-:107EB000DEF91332E959483C37E2CB63717C6D1E21
-:107EC000BE87A305B43EBEDAAAED3BCBFC80D75AF1
-:107ED000EBE8F9ABD6C8BEB3CC257CA3B581CABF4D
-:107EE0006D8DD233D9DA48CF33AD2DF4FD6CEB2A4A
-:107EF0002A9F6B8DD1F3EDD60E7ABEDB1AA7EFE782
-:107F00005B3BA9FC7EAB4E4F631E18F62E44843DAE
-:107F1000D9F78309BCDC2B70900B8D386698EE95F1
-:107F2000EA552F56A01DDDFB9A9BF26E33D1C92E68
-:107F30007799F9A7D17ABF58B7C6998DA7378BF330
-:107F4000C7EB803ACC91583FDA4571B4AC9F7E863E
-:107F5000EC71F65E017ECF7278769AFB3ED1FF46D9
-:107F60007E0DC427A3FEB96FFFDBA48555C89F32E1
-:107F70007EEFD773720BE7DBBEF097C70E4C3FB2B4
-:107F8000F98AFAD351FAE96F46607CEABD02839E12
-:107F9000DD2330B8A5A8911D2887BD47DC8457EFA5
-:107FA000B16C9E8F8241B541E4BF2E3BE8D5CDFA3E
-:107FB000617957AE6ED51745BA595FF49EDAE7C7B7
-:107FC00079BF3228EB67C7A37C68423EB8DC19FD55
-:107FD0002FEF2AD5554B3FD6726F5CAAA37B202189
-:107FE0009433F712F7A7AE0CBA689C770F8EA2FCF9
-:107FF00003E627EA6779BC53E7E30675B35C36AD61
-:10800000CAD6CF0E49C197A9DFBF367C0047E077BB
-:108010009ECCE771077A82F2AF2EBAE7ED98F32291
-:10802000AE3B6EF6BF8F295F48A1B2D16F73971C2C
-:1080300073E3795E3864198FB50B193EBAF9FE9C6B
-:10804000FE7CB7E683FF166589D66D7EBE3C8AE767
-:10805000CB597F1714B543BA2675BEBC59C8E57213
-:108060004FD21565AFDE3B32EA92F920EFB69E0A99
-:1080700028A3318F20EE4267A4B1EBAAE9A81FDF45
-:108080003BB2BA10E369CBE4DE7BD39D9BFD50E5A8
-:108090007136D09D3D49133E467C0680F5EB49C1C3
-:1080A0008F927ECE54B6EB6BE3E9F0F1B8FB8A43D6
-:1080B000A7677E8EC1BFE2E8072E84E3A81A75F891
-:1080C0004CF84BE27CFDD2836FBA10BFB79DB18AEA
-:1080D000FB2FA1A7FAC3A9062DFBA131E8C679BCE5
-:1080E00090FFF602CAD3577ECDA6E63BBF7002FED4
-:1080F0009E83B15F619C7B5804113FD26BE1916517
-:10810000141F7EE7992F0A7B2E3E09E5E33D70D4CC
-:10811000217EEFC1CBFEF126FA95FBB81F031DDCD3
-:108120008E31CE05327BD662D72CE9B49617C39C2C
-:1081300042D41B8B1F75822EE1FD9FA67B9818DE13
-:10814000F93E6EEF2E8196B568CF296EEE1F2C0C8E
-:108150008052CCF4E9F21F3E3609EDFECFF8F8BEAE
-:10816000A311C7B82B8FDB7B4BF37517EE27FCEE03
-:10817000C8F8799F43E973EB6B715D869CF4FB7FD4
-:10818000777458E11B087E3BBCC6B9F77EF1140139
-:10819000877C504A9B9F36D927E44EE891877C56CE
-:1081A0003B7F9DAD5CEF1371561964E4F37B014F87
-:1081B000CC9143DFE99C6DECB03BBC3A84F76A4557
-:1081C00022285FCC2E1807A67ABF57A3F4FEBCF472
-:1081D000D2623A67AE24C6513E9E07284FD125E4AD
-:1081E00041CEF28F836B304EDA424EFD6AAF7F2F65
-:1081F00096D7FAF839A8669CA7ACBFCDFE99A730F0
-:10820000AEEF8178422BC5FD6F6BFCDB1BB296B3E2
-:10821000713EA13EC117C88F3050BC28BBD25ACF87
-:1082200017B69697F6D129219BCF7DF83D6A027F3C
-:10823000AF026A94F366BB798587C30F78AF2AAB28
-:108240007F8FB0E757402846798B412E07F7CCE265
-:108250007913F7F842E118FB2E291A9D8F58874DA4
-:108260004DEB58F38712E826BDDEACF4B8502E9BD8
-:108270003F54E8FD6E35FA20D2D5051AD9B91E460D
-:1082800034DCBF56D43A8BDD0B25E27E405BFEC268
-:10829000265FC0E2EF197AC129F422D317EB7C05DF
-:1082A000A8077B66F27DF5A48BEFEFF07AAE54BDA4
-:1082B0004D0847A67ADE54BD6DE9EA2DFFE1779FB0
-:1082C00089B1F9BEF4FBDFF4E366DA3B4ABC10F394
-:1082D0001F9A0EACF1A31CBFADC4FC88F73B7AFA21
-:1082E000BCF79F097D87F94E785E7E85E0D3BBFFA2
-:1082F000B8F126A4FBC5034E3A6FDF7CD09D7033E6
-:1083000026AE38721797A783EE3779791DFDFE48A0
-:10831000F351EB7C5BFAE4370B43B4B9172B16F738
-:10832000B393FDBC62FFEF67A23DD20C3DA427ECE6
-:10833000ED70FC0FF368FD5A80E7FEEDDF8D7CAB3E
-:108340006621F7CD4736525E55F391599447D56C67
-:108350009BE78DC20F39EAB3FE6E83410FD0B95D42
-:10836000BCFA3BDF1AF72683E7FCFE5FF8254BFCDF
-:1083700088EB89DEAE3B1E7F369459BFBF2FFCFAD7
-:10838000543B9DDFFF7D94DBF1708C3F9B9C093F4C
-:10839000FA4D4D7B9C61A641A0E9BBFB9EF836CA15
-:1083A000F7EB6E8A372CFBEEF3AF5EC7CACB9E723B
-:1083B000E6D7733454CC0336F88267DC315FD7E0FC
-:1083C000C3D21F3CEF0A8DE5EF1FC84BF163D953B1
-:1083D000275C30B63FFDA6759D70F1F3E736BE749D
-:1083E000BD3913EDEED5DFF9930BE7D73BC7251861
-:1083F0005ADABF7DE39EE7C9AE433A111F059FFAE3
-:10840000F8D68F5F899B9E9D40F502B88E0DC4AF54
-:108410006FA3CC14905C7FEF59DC2FF8953B8C74E4
-:1084200068FCDED7FD88CF5B4A0B97EFC7D614E216
-:108430003E7AA3335618A0277FDFB8FB1B24774B67
-:108440004E7FA390E7416945FCF78C62451407DC39
-:108450007533E1B918A2247F8D8FC99487FE470533
-:10846000EA9E4A333F6EF0733DF6D65E375D7EF787
-:10847000162A5CF4175F96757EDE96E7257EC3D8D4
-:10848000F7C0FB1B59F98F1ECEAF02BFC3B8D7CAC6
-:108490006391DBFDEBBA914FEF0ED78662BC92D1B0
-:1084A0002126E826A11E924FCF18CAF90421659211
-:1084B00068C7F4E4347C8FF5BB9D9A779CA59D58E2
-:1084C000D7F8F8F788F119DC59689FBD55C8EC9DBD
-:1084D00034F82DF31BF39FD91F263933CD733EEFAC
-:1084E000F7AFE7F3DC98F7FAEC3AFCFEAFAFF079C0
-:1084F00084ED709D67702586D2F7137325D20B6EBD
-:1085000048A49BDFFB9D627E5BBF33AF9CEC5B436B
-:108510004E18FC0AAE5B2979E1FBBC8C0F64BF2DC1
-:108520007E94B537DBE7382ED573A5DE9BD6FB25C9
-:10853000421F5CE7B7FD8ECBAE8241DDFBD3E4D4B6
-:108540009FF836CE5F365F71FD69FAAE93F244FE56
-:1085500070E8B957BFCAE4FC0F5DC6BCB5EA53FB6F
-:10856000BC6D3C3C11D2CDDB3FA861483B6FD9FBD1
-:10857000B4F3564D923CFF47E953837E0BFDD63C46
-:1085800027433F66A2A35D3FFEC517227ADAF52393
-:10859000FB7B0526F5974343FE0CB95BFA4FCBE90D
-:1085A0007742FAE4D390BF3EF934E4CF8EAF957EA4
-:1085B000F6EF9F4143C58817B3A7F32188F9309E92
-:1085C000FA1399E2A917184C6B199F2F1C2AA5734F
-:1085D000C46BBCDC3FBF10E8F1E755D13D3854EE29
-:1085E0002970AD457D61BCEFF1F2F8F785488FDF6A
-:1085F0009C07F2E631D98FFB5D491DEAD2F9234C85
-:1086000023131C49C8F49DC78B2FA0FD87E3658DFC
-:10861000D0916F336475C42AF4F3E3FCBCFCA2B6BA
-:10862000AFF8711FFEC2B1515B517FDDF9A20CE2C0
-:10863000F71315CC37B943F0FF6D886D9FC2F0BCBE
-:10864000E318F72B166D4A2F2F4B45FDC5EA3D2E3B
-:10865000D44BCC2F38638E872F15BF4BD6B8CBF6B3
-:10866000FED81749AE96DAE42A2AFCC6EF1A7275CC
-:108670002D5C2BFC3687399F6D865CB515ED920B12
-:10868000A7781CB2F7984CFCE83D24F1FC278C0736
-:108690004F4679E87199F3D8CEA3FCA5B9DFA0EFD6
-:1086A000FBD3BF99743FABD2F4CCAFC7ED64CFF32B
-:1086B000CFBC5EF1632CFFF09F47FC1AFAD79F7680
-:1086C000FCCFB49F7DE1B89BE0B870FC6723EEC798
-:1086D000F2B36EBAAFE6C2436E9EFF79DC47F7D6BF
-:1086E0005E18CEF38556FFE44FE3E8BE3EBCC99D5D
-:1086F000F1ED353FF7C77A8FFDDB6F317FB8F79823
-:108700003B8478341FCFA6FDADE667BD14A7B9F052
-:10871000933F4D32E7335D293E2BC47D88177CD0D3
-:108720008079CA1772F9BE41F38F27EFC37344CB28
-:108730008F9C70E17ECCB49FFEFB38D43B170E7348
-:108740007BE27D677237EEB3FECE7FFB3A27C677BA
-:1087500071BD1E06D09AA3DF88F7E1F4A70BA7C36B
-:10876000054607C48BD1A511F565267AFCEFBF5BE2
-:108770007A7C301FC76F3AF6599A3729BA481A7F60
-:10878000EFD3F16813C39FBF3FFEA771681FFDA120
-:10879000AB8DD6F981F02ECAF97F0D6F293118BC47
-:1087A0006BFE6EF1E6F27FDC1FE2797FB679D05F77
-:1087B000CE7F782F95BFE70B13BC839CFF0D7FB74F
-:1087C000F87F42BE1F667CF70FCCF7FF92C3F78598
-:1087D000FFFEF01E88EF2F0ABEFB02988770E1278C
-:1087E000FF4EF17503FF81F0DEFE7F29DE863DB48A
-:1087F000C1118E9795621E76A23BC4E05C53392767
-:108800008E612959E45DDBE17A2187FB17B2C4E36D
-:1088100036309CC78F40F81B7DBF03A9F2F3558A01
-:10882000BA96DF47A684E97EBD0D572F0C536E071D
-:1088300054BF16C572C914FA7D5BBBDFD52E8126E5
-:1088400031FB4FB9FA0BA7D0FE77563A12EE71F40E
-:108850007C139FEB44DCCB197059FC0DD5E62778CF
-:1088600043D6EF6ED19F07AAE3F8FBDD1E5509E85A
-:108870006C7CB5364EF8606E67DCB46F88BF8F9D38
-:1088800030F9637BF107024DF6E4E5D2EF4F39DCB6
-:10889000FF94A5EA6ECC8B85AB1CFC7E73E0E78A67
-:1088A00037948475BA8F59F897297AAEED463A2AEB
-:1088B000C0FC438E1FF99520FC494574A1543A34FD
-:1088C000AFB59EF09706E40FE7C78826C19F9516BF
-:1088D0007E18F44FC3170B3F0CFA5E2E5FECFCB012
-:1088E000D3FDE7393C3E67E793251FA480FB2509AC
-:1088F0006620FFECD03E8A8BBCF78F6FDE84F59745
-:10890000FD5806FCDDC4F70FF92081F357D15DE86F
-:10891000672D3D22535CF8FF002820961900800047
-:10892000000000001F8B080000000000000BED7D20
-:108930007B7C54D5B5F03E73CE4C6692C964F29AF6
-:10894000CCE4C524811834E0244040419D104010FF
-:10895000EE754011B451470810CC13A4BDB4D51F17
-:1089600003C1343C6C43E5A5453A202AAD5803A623
-:108970005E50D4411E62AB6DB4DC5BB46883A280F0
-:10898000F24869F5C3FB79CBB7D6DA7B67CE994C51
-:1089900040FBF577BF7FBEFC73B2CFD967EFB5D789
-:1089A0007BADBDCE9E4B97E0EF26C62E892B632D67
-:1089B0008C653256F77C3263198CDDBF2B213CA5C8
-:1089C00000AE2F7E3C940D61ECDCB29E4339703FCB
-:1089D000F44BC5F714760F750FBD0DEEDFAFB17B0D
-:1089E00003A5D171E435CD69626C046367F624CDCB
-:1089F0000CDB1953B6EFBB87C6ED98614E50A2FD54
-:108A00006C4E33CD0BFDFCF83CF40B253C48E93BA8
-:108A10001E634BF978BF50387CBBCD611BC2B77D5C
-:108A20008B250870346DFF8BC50F70543DFF9CA3E0
-:108A30001BE66BDAADB24809A3BF4B0C9FAB918428
-:108A4000A1743D8E57C6FC76A582B146FCD70BD7E4
-:108A5000CE8629CC01D78E557F511DF8BEF9A36E65
-:108A60006BF4FDBAE75F793104A8A97BE119871798
-:108A7000AE9F753DE560A534DE7D9614C634BB66B9
-:108A8000E88FE35E4CEB3B0ECCCB980BEEF35BAC8C
-:108A9000A963059FAFF35F4E32848FC138126E58C1
-:108AA000DF67F88F87B151CEE48C4FAF81FF47B2BB
-:108AB000919754B86E4F67ECBABE788AE22BC4E93E
-:108AC000F9DC179B43809F33BB3EDF8CF0D7FFFD63
-:108AD000AF9B7F08F863AFDA9C4FC1BA9B7EF91F4A
-:108AE0000EA4AF7C6F9A53A1F7CEE5B19007FA9D23
-:108AF0007B2F211C825BE75E3999EF85F59EDBF9C0
-:108B000095CB0BFD17BD323E0BD7BFE8D75559CCDF
-:108B1000DE3F1CE79630164ED0C315263A7A77C34F
-:108B2000A059D0DC2BAE31F4D8DFB93F1FE13C7B3C
-:108B300034C1978078827B8BCB913E40A7A1BCFD4E
-:108B400020E0B771C78FFEA20E8D87E7508EC98DCA
-:108B500074FD7802C2C9582487B911BF3DAD4E7B60
-:108B6000DFFEBDF43A02F4BCF61BD06DC70A3E6FBF
-:108B700007D0CDD1976E67F11FA04F13D22D294A90
-:108B8000B72F58F0E79E226877A6135DE3E12BF23A
-:108B90000DF055ABF0F16F70FA7FE044F9D995D440
-:108BA0004BAF2948AFE7BEC86740EF53E69E7BD87E
-:108BB00070C67A5E49706E85FBF7BFF24792937379
-:108BC000BF7EC78274843FBB02EB3AC77AFFBA709C
-:108BD0009D8D8A58E7B6E44882238AF7C6F0D48987
-:108BE0005E07DD3F4EF7C39C7F117F39489FF0BE83
-:108BF000DB9538F4E87016D23A583893D6DDB0EDEC
-:108C00004F16E41B4927A48F320AE9757C02DE97D0
-:108C10007492EB8E1DCF897818A9A3DB362E877D41
-:108C2000E9DA636145F1E805F0E27B082FB4CF6D26
-:108C300049D094147E3F17D671CECC6676201C6145
-:108C4000E58FF1E8CBD8325ACFB3B17229D6772568
-:108C5000B9BC12DCFF285E9E703A697C899F335F45
-:108C6000C7D7CF8750CE01FEDDF6E041E41FC6AC8A
-:108C7000E11330CEBD4C61294551BC4978CF688C99
-:108C8000F4EE995FAAE110ACBFB5633FE9D958F99A
-:108C90008675F93BE2CCF747315FE3EE7D43510F38
-:108CA0009D797D0FF15FE38EE396108C7368FB0B6B
-:108CB00096EED228BFA3FE0EEBF4F7995FED1B4AA8
-:108CC000FA16C78FA36F4E88F19BF61AC76FDAF1B9
-:108CD00017C3F875A10E8BD37EE5793ED3FC3370B4
-:108CE000BD9F759919EABFCF3AD489E138F3BE29FF
-:108CF000EC97C453EB3B16B263C3DF4D0C27009EC9
-:108D000016BD33F14F291978B57801B5AC7329E751
-:108D1000ABCE87FC394897CE77EE52D19EBC88788F
-:108D2000BC2A3A6EC591E6AA6490DB8A6381E1C8E9
-:108D300056B1FA60E45193016E98270BF5F372185F
-:108D4000C70BE330CDE70EC0B8AA63C244844775B1
-:108D50009A9CB6B876958F67B6075810E03283DDD7
-:108D6000F6EAF8C93DCD3194A5E0F23C26D40B0BD0
-:108D700081BD503FBB2DAC4403F89829D1F7148C2A
-:108D8000BB70B0BFEC20B417CE71FB42F0DC731B9C
-:108D90007FEFACD31E325D8BEDFC30CA51D24595CE
-:108DA0007941F59D51DE9ACB40252409BECAE94898
-:108DB000223B93A4793754433BA956F30146D92764
-:108DC000F6605E6A26BE67A1F73CA98AF629AEDB8B
-:108DD000C11C286F727CD94F8ECBB4C8505C3FB396
-:108DE000328D815DC9651C6E55ACA7887529C8DFB9
-:108DF0002D531D5BB1BD29B996EC7F3EEBD9E7073A
-:108E0000BA3DE9987018F518FC6BC27E79CD46FB27
-:108E10003E60B1B15D10D262E4D76B0A00FF15B5B8
-:108E200019EF6754552E18E063EC9ED4CE891AE8EA
-:108E3000EF8C19953B7300A79357BECBDBCF5496AD
-:108E400079A0FD1F6B1A2669A047327E5F59960FE5
-:108E5000ED0B69DF9F44CFEB0049D783EA5F3374A2
-:108E600052A8342AB79900668A4AF27C23E2E16C60
-:108E7000E04C2B3E6D98FEA5051EE15F00F190379A
-:108E80008AE321D77E6C2783FE034CDD4B912F7F35
-:108E9000FECAFF4AC57E5EE6A4F53AD972E7A75638
-:108EA0005C3C1B7569D8E5F499C63E957CA846E5FF
-:108EB00020C515BC3515F8AA7556C98609A86BEBEF
-:108EC0007DC45F30B393ECA1ECEFCC20FAD408FA68
-:108ED000209C56E0B339BC0BAB65ED420F8D73E2BD
-:108EE0003C4AA85EBD74CDB7876796E49B64968CB8
-:108EF000F7B57A2FC1D595E99F83F8FA2A334857F9
-:108F000079DF3D6BA63708F8BD3135300FD7E199D1
-:108F10007B311FE19F92CA68BCAA79763FDAD50BF4
-:108F20007B41FDC5912B79DDBA84F9B441FD3F9FAA
-:108F30009616FC2E8E5FF89A77D76118EFDA1A8BA7
-:108F4000CF06535CBB78B84F4B677C41E87708BAD3
-:108F5000B991962877DF636194BBF3098ADF0FED3F
-:108F6000F30F38492FE7D64C398CF6EC7C52414749
-:108F700004EFFFD04BF2081E8082F290B7372562D3
-:108F800073103F7F19C3CF5F1AF9D738EFF94BDE63
-:108F9000DDDD349E538C070E113CCF13743AAF7253
-:108FA000BFFCFC122FC101EEE33EB4B7DF74BEB5C7
-:108FB000A9C24F12F479C8E65F87F400FC6FD0E3D2
-:108FC000FF67FDD37133F6033AD235968E73ADCD7C
-:108FD000F9A817EE0F744C008DCD4ECEFD5E053214
-:108FE000F7D4D4E036EC5F3FB3EB9099A0692E46FE
-:108FF000B9ED4B6785F4B96BEF7D4BCDD06E423A3E
-:1090000079FBD2F3DAC56544371D7D3B70FC6BF705
-:10901000FEC584F04BBA6E50B81D887DFFE55445FF
-:10902000CC5BBFD40CF8BCB0DB42FE6F6CBF83A935
-:109030005EEA27DB43AD153E0DE434CBC482F1C6B6
-:109040003DD8675CAB2F210EFCBDE339F97880FF7A
-:1090500037F4F8FF6DFFF8FF9DC0FFEFBE25FE8FD0
-:10906000209DFBC3BFF4BBEB847EA863ABC9DFFCD0
-:10907000C43FCD3510E69FA0DA491EE63FA5921CFD
-:1090800042FF291E57549FCCBFAE791FAE77FE1307
-:109090000AF16D4D90EBF9CFE74E3984FA7D4EBB66
-:1090A000D17F9A3B33644138E76D34DE9F1F8E8950
-:1090B00007994EAF035F9C89F2EF00AE77DC642F17
-:1090C00055211F55F34A53D05F7AD5ECFD3DF9E3A6
-:1090D0006FAA6C6B1CFCE7A715903D96EDBC664033
-:1090E00092CECEB31A9B09F5A51C77DCBCD22CF42A
-:1090F0006B16267B2F1B870D586CB4EB05A144E63D
-:10910000D58D5BD49666680F6ACF36F4BF6A63A1CB
-:10911000E1F9E0F0D586E7D76C2F37B487745C6F40
-:10912000E87FEDEEB1867659E41643FF6187A71913
-:10913000DA23BAEE32F41F797496E1F975DDF71B84
-:109140009E8F3EB5D0D0BEA1E707463FC6C4484F6C
-:10915000B24485F4E68125A72A4E20C30D57C621C7
-:109160003EAB46F1BE0716584C4E075E8B4D4EE0A7
-:109170008FD7E74C213FE0C00297DF4BD70A3FC6AD
-:109180003F4C1D333C18C7CF1DEF3C5D7142376F1C
-:1091900095D56CD073E39DC6F6B034113F0CE07CDE
-:1091A000332ACD285F6AF39488059AD9F30766E1DC
-:1091B0007C2067A3D3B89CD1F58A72E668AEC0362E
-:1091C000C859655A1C3963C2DE560A7E82ABDF522B
-:1091D0008E8C954C76D98F37BD743FA441BC32D666
-:1091E000EACB3D88EB32F9329009C7CD0C1CE0E3A5
-:1091F00009FBCC4A4CDFC63E4B39779BBC21B26B96
-:10920000698CF24B8FCD294E613AFCDE956612FADD
-:10921000A09DC791CEEDC33489C742FDFD8923B41B
-:1092200092E87D65DE942C943B773F7AD1E22E1A4A
-:10923000BC0DF4B1C553405779BF75A66962380EAD
-:109240007D1BD2789C21FDAEC151BFAB01F17BD615
-:10925000FDEEFA4180AFC6EA1EF2BBDCA6F605873A
-:10926000705DBF5179DE0C3C2BD40B73841F3D67BE
-:10927000D24F171C02FD34E7ED41A49FE43C9B96BE
-:109280004406EBFD86DC7EE2AAED029ECD4BFC831C
-:109290006B06115CA41FA49F9E1F6A9880F1CE00EC
-:1092A000D64C71E37A13AB8D37CE0A314E16921C31
-:1092B000E175DA494ECECE3DE6D0601D89C9C115B3
-:1092C000C86FB3AEEDAAE0FE98DF370DF8273F7206
-:1092D000F77AEC9FEFD65858E93B7F5675B0AD0052
-:1092E000D6B73CCDE4B353BB47C1FE090F32960E4F
-:1092F000FD97FF5D257896BF7E1DC3782DC1DECC1E
-:10930000D0AF95EBDA9FF638E147ED4C223BC8D061
-:109310002505FC7D57D0FE0B774D17FA1D5FAC3548
-:10932000D37C5FC01A9D30FE179D6A189DF7436974
-:10933000891113B4D5B664B2DFF9E88342FFB99D51
-:10934000C9616F41142FDAC6312C02F62E2197AF76
-:109350007F799A3D6C2FA075AFC1754B38E5BAF394
-:10936000FA89432369DCCE327F8981CE1E88C9BA4F
-:10937000706E0D9C7F18475D6BA638714EAA9DE0FC
-:109380000C2F090DAE31F75D5FAB7BDAAD77023C98
-:109390002D4754A6C238DEEE76C2C75CC047D8DB84
-:1093A00017DF67BD055F9A54823B82FCA86E9C4024
-:1093B000EB62E8D7C37B0D3F57D8E305C897C18957
-:1093C00044E76C137BAAA0EF3ADE48E3F9DBC369FC
-:1093D0004EBA5ADCC55C4EDC03076F83F1DE423DBA
-:1093E0006565F1FC80DFA7717F9AAEB1FA09EC6088
-:1093F00008E1B8B051217A9E54C21633A0ACEEF603
-:1094000066F207A47E52FD2AF91F524F49B8408FD9
-:10941000BD9FA6B38F6ACA834371DCFEFDB59DFB79
-:109420002CE8AF3919F96B528FF6E7AFA19F86FC94
-:1094300027FDB45331EB84F57D2ED6F779BCF5F5D5
-:10944000D1BF77354B3FE72F6997F133332DF1F5D6
-:10945000D355E99C0E4D4E0BA3FC14C6CBE83FCC74
-:109460003785B7621E4A0BDBA6EAF0939D2EFD3CC2
-:10947000EE6FF4A7F7AE149714AE2A25FD7BA1CBAF
-:109480009B9206D78C8F95E678E3A88B9F1D8674F8
-:109490009A6FAB4C4A07389DE9467C3DB6A28FFDDA
-:1094A0004A4FE7F8A36B1FFCD9017F26839FF86220
-:1094B000B197F0E749BF8C9F78F6B60F2BD02E9D61
-:1094C00013786AEC8D7BB99ECE06638579AD06E68E
-:1094D0007FF244096F5F5268D783F2759BED81413B
-:1094E000387ED3EE494FEAEDF7D7693C9FC6EC6969
-:1094F000946F95E3B984DE8738FBC64FBCA4FFBFE9
-:1095000044FA46E3EDEE0A8CB75A7E7D550AFA67B7
-:10951000E35EBCD389D70B190309AF675F4CF02317
-:109520009C67D3401FDBB13DF210E6213E5F7238ED
-:109530004D4F97B3BF7AA7C20CE39CDDF54E8586ED
-:10954000F90C91AFE9B54797FE501180F743635985
-:1095500049B35DC727566E2FD6DA78BE23D3656927
-:1095600065D7423C92994AEFAF73997E8CF755EBE1
-:109570001FF24FA09CC5E477D69ABD2D76E03388C4
-:10958000E57CB84FB070B0DF3307F33B53DD949701
-:109590006951B81E0DCDE1716846212B2980F1CCAF
-:1095A0002655C5F77A3CCCB715BA241C688FA0DACB
-:1095B0004BECEAF023F8C313D3089FA3CF38158CE4
-:1095C00027643E48ABE2E3F54CB784B7EAF240EEDD
-:1095D000991AD9C524AD83A19EBE2F338DE097F98A
-:1095E000A0AA6933039508D7C3268A6740F12AA841
-:1095F0000F73C43A0A3CBB5648DF4673215B324CBA
-:10960000FEB055C0FF0301CF0EAFC98FF957476EAB
-:10961000E4A819FCBB9CE58C7DA4F323932C42DECB
-:10962000DE5649DE92BFBEC93A13FCA3A4449E573E
-:1096300075045A17605E1CEF7FA71CE9C2DF27FA8A
-:10964000A898A662A11400397994715C49BFCE250F
-:1096500056DF4060E85D4B9C747D7A899BE0FAE9B7
-:10966000122F5D7FB2A484EEF727A757BA3EB2044B
-:10967000E6D5F153C648C00AAC37436524CF8F8C7A
-:10968000A8489915C71F90D7C7971C768D1B241023
-:1096900008F4C8AE776E59594074462182D5BDBDD5
-:1096A000C23F86B187CDFE050C586B4DFAD7E3302B
-:1096B0006FB54A31519EEAA7E96FAC08E5E2D54B98
-:1096C000744FDAFF1EC37CA76778BB82F2EEA96FE6
-:1096D000273E18DED5C582E2BE1FDA9E23FCFEC3FC
-:1096E000368EE7D58C4D4478ED0A0BE0F59C8DFB6A
-:1096F000839FDAB87E3C2DAE43D2839B518EFFE62A
-:109700003C5AFC3080672B7D3F1FF73B92F67F452C
-:10971000F96075A8C58AF2E1D97B9CF6415453B72C
-:109720008581497EEDD13F537E4DB5040A78FBD744
-:109730002BB19DE9086C41978D85FE3CE9801BE4C7
-:1097400006F9E17AC24608E578954DB443C7080F9B
-:10975000ABCCBCFDDAA37FA275AF3207E6235EB0C7
-:10976000BD1CC65B95DAE13641DBBEF4BD15876FE3
-:10977000C0B6ECFFDE8A10BCFF52BAD437010FEA44
-:109780008FDEB613DA43746D8DB799955FE5FA1ADB
-:10979000F67F752807F8B571AFD281A079F6AE5182
-:1097A000709D9EDD6B08DFF407F281CBA03CA935EC
-:1097B00064C1F79F5E72D8B91CE8ACA5B5B910EFCB
-:1097C00057B9837E7FBCFC44A6F47FA1BF3ECF1671
-:1097D00036F774EBFC710FE372C396837E88E35F08
-:1097E0000CCDAC3C9D01E3AC55822B55D433CF99C5
-:1097F0009DA8475817D74367C4582C9C4DFE4DBDB4
-:109800008D37CDCB822B07A39EB85BF361FC5C57F1
-:10981000D05E89F6BD6E4F816F298BF24B5D6A87F2
-:10982000AB1CF927D5D86E117997ACD4E6D4D452B5
-:10983000DC8F58938FFB058DACFD9E1F20BC6FA95C
-:109840000CFDF4D3FBAE4B190DED0668A3DFD0D0B1
-:10985000F98E05F9F3D10CAE3F1B3B817F609CD59F
-:10986000205F7E7064B668CE44D44F4FFB9BAF46FA
-:1098700017EFEB47FF6B920DE8FB4CA1DF89F47605
-:109880006798575AC1697CC6E21CCCCAB06D27FEE6
-:10989000AA2B33713962F6DFF835B1FF09EDE38F9A
-:1098A0004EBA459FDFF5E0BE0CE0B969933D644ACE
-:1098B000217BF3BFD1DE366E3485507F99AC5D16C7
-:1098C000A4AF1BF776893E4EC2DB22A9CF63F4F525
-:1098D000A24969B7607BD1C385CED065F297B51731
-:1098E000935858E71F3D9AC1E5B8560BD13E4AED53
-:1098F00045073DFFE7CD6763E161979BCF4ECFE51D
-:109900007CF5D1F988AEFBCB7FB37E20D06DD14EF4
-:10991000B32941C7778B768AFD6A9B3F0BC7C9B4D1
-:10992000308177F0F701BF5A416F3BA4819C3FD251
-:109930002BE703568E1B83748B3E67A30C7AC08F74
-:10994000F1E62389520F5C15BF7F624CFF42D9F6C6
-:10995000AD1C97DB179ECCC468DB0AFDB5FF4EE853
-:109960006D237C6B4C31E3A5C9F947D17892AF8E5A
-:10997000A757FE2634109EA7B65762FD46CF1CE6B9
-:1099800045BB8CFCEAD3E9FDE3E95CAE6B2F16190D
-:10999000E81DC57BB1E1FEC9256EC3BEDFBCEA454B
-:1099A000B43F791CF53C8EC3421457D56ECA616131
-:1099B0009D3FF5FFE1F847E118DD0F1C37FE0FC3AF
-:1099C000516090CF281C030DF7FF5138B6DE517C53
-:1099D0004B017459A784AC8568171E3251DE444D83
-:1099E0001DE75D8AFB0F0F69E4E7A14B82F51F8538
-:1099F0001A3BAC95A3FCB4FB31CE67CB78FE08EEE6
-:109A0000B799CBC90E911F5CB437E13EF4D30A6B12
-:109A1000FDF3F1CA724B697F43EE0B32910793FB62
-:109A200019839CAC5203E76D74E67D64A70A03D5E5
-:109A300075E8CCA9C9C313D13EAE338543385FE87E
-:109A4000A77CBE4C53B8C38ABAD731D089F62ED37F
-:109A5000C1F51F5B594AF66FABA9F0EA0500C7C311
-:109A60004A65E29B88E7D442CAFFE2FD85707FAB7E
-:109A7000B05B6AAACF89766AABB05B2D42BFCBFBE5
-:109A8000496981FBD09F3895B1E816EB75A887FC32
-:109A90006DE9606F4E662C5AE9F6A0BDF1165AC109
-:109AA000BE9C5CFB00D99BAD4BBDD9CED4687BD0AE
-:109AB0007F83B5263DF1C04AF45796DB17DE8FFE53
-:109AC0000E3CFF8D15F4EC336942EF88E785BD7AD3
-:109AD0000AF412E83175696F3B847AA9B057EF3CFC
-:109AE000407A67DB6695DA6FC37CE8FFC03A422AAA
-:109AF000AE7790467EBD0D604984B66D7021ED1342
-:109B0000C1BA5922FAD783F97399CFB70C32513EB3
-:109B10001FFB231E6D1EDEDF3295F9705FCB926C4A
-:109B2000A73844EE0FA8629F2A51D46928CEA91401
-:109B3000DF5957972FC478CC3AD0B80F6B89A9E773
-:109B40005063EB3BEC11F2BF4E6788BC7E3A735F0B
-:109B50002A8ADE07BD5D8E57D79DCB2B11DE85C9C6
-:109B6000CCA9625E2518A17DCE58BB66053BEAD51F
-:109B7000C987D5CEFCF1EA090E65723FD67E51A3A6
-:109B8000F866AD02FE0DDAD164CE67D23F323B25D6
-:109B9000DF1AEDAEF497CCA97C2D8B268DCDC2F8C3
-:109BA0005DB5FBADE8E7EC7396535E4065BE5B2B9D
-:109BB00075FECEF2C824CABF694E3FF9E145224E78
-:109BC000549D3EA6F7735A9740607915634F56141B
-:109BD0008F457978DC16B116217DD79928DEDB5FB9
-:109BE0007E7F48C1FCDB624672FA64856B2CE6D14D
-:109BF000B7688194BB515E8EC07C5E4E37BE9FDBE2
-:109C0000A260BEF80B6B2005F5C123C8F73ABC3C37
-:109C10002FF0F1F70CAE7F1E3673B968057822007D
-:109C20008776F11ACA6FADC9E4790F4BF538CAFFD0
-:109C300058001F98DF4B60CD2127AD97E7EB12DC72
-:109C400026435DA0767128BDFFF70C9321AE6E838D
-:109C5000757A75FACBC64294AF431C3F15C77F791E
-:109C60003B93C72356F087BCE49FC4EC73F7F58F92
-:109C7000C85F91F4E9F55314F04F2E138F3541BCB2
-:109C8000ACD7F74D5A0FE9DF268887F1FE39A79543
-:109C9000FC4359F76017FAACD51D6C1F8D7C9EE80C
-:109CA000188A79008D7510525663DD03EA43B7D6E2
-:109CB000D3CBFF20F32D36C756ECB75CD44124F943
-:109CC0008CF293C8DA237E94CF129DDC30C477885F
-:109CD000C64DF01AEF331664186768EED83A89500B
-:109CE0006F3D14D5F369EC31DCBF967E6F8EA847CB
-:109CF0003A9BF421E5D1C0EFAD4CA77D801E8A5B75
-:109D000064BEE7DBFAC9453806E61116FFB5E20482
-:109D1000CAD9D40905783F49E37C02AEB896508E83
-:109D2000E1D584F9A9B0FE3B85FDCB50DBA96EE4FB
-:109D30003511CFFECD39D3437114E093EA6D127D16
-:109D4000DD142F0A3F4DEDD58F7F5EE137FA9D215F
-:109D5000BD9FB76ADD9F572CE7F10AB55F7B3442A0
-:109D6000FAF3619B6CBF4C6DB073118C97D88B0963
-:109D70005EE44378DF8FF2C6EE28263F5B2D64D980
-:109D8000888F710E2BE94DF5C584ADE807435CFC67
-:109D900052BA6EBFF86CF2D17CF487E38C17328C28
-:109DA00097FFEDC683F93BB11E473E1FE7D8185118
-:109DB000F97B5E7C8FE5767D1882F1D7FD3A81AD27
-:109DC00004143E6E36CABBBC6E15F28CFA465F0FA9
-:109DD00069A9AEF123534BB94E7027B2888E9FA468
-:109DE0009C6B1707B3884E4E8A32F9BEAAA6F92992
-:109DF0008FA45D2CA5E77F4799A6799C579827AD3E
-:109E00009F798691FEE87F9E0AA15F98D8BFD2A86D
-:109E1000AE46EA85FEE43C769F2C562FCAABD48B27
-:109E200059997CFC7D99C6FCEBFD1B3B0E210B7DFB
-:109E3000660F1EC8A4FAA8630E34E1F5A6C850E464
-:109E4000E34FFADE6FC4C5BD95CEF3FEC5DB17BC8C
-:109E50008EECDA9519FC02FDA0DF648AFD4937D843
-:109E60004315ED1DD88B52CAE77E9181F9DCA077AE
-:109E7000C37886F27407E573535C81521CBF755A30
-:109E800005E51C24DCAB96F03A35A967ED5A90F055
-:109E900065D542FCEA0C820D67EC42A679B2A62099
-:109EA0003EB91C1D5D7781E4C0A6F989AF6C4E9365
-:109EB00017FD021BC485A877973A4D7CFFC66DA598
-:109EC000FC7FAB021122E88D85A98597DD1FB75C69
-:109ED0007491BD0548DC7ABDFDCF9F2743D807E3C9
-:109EE0003C9A93FB0D6C3FB7C388848F75FA58FA80
-:109EF00003B1EFC58E2FF129F16B45BC96923D8CD5
-:109F0000EB6FD85CC6FDCC2CA96F338F1647E06E83
-:109F100083D2ED40BF06F4A8CD857A7A488FC3E49A
-:109F200025FDEBE27E5048F035B3EBF95AE6A9E5A2
-:109F3000BA24FC0BDF9C63D5EFBFC4C21B6B67ED7B
-:109F4000A5C6BA059BD758B720BF0B50B500F18DF9
-:109F5000798CDF8A72B2D459EE443F67B9E6FDA32B
-:109F60009FEA2DCCE46F83FF6E985F5E1F01F94777
-:109F700038CA5C26435D8DBC26E33E4A9CF7A6BAF0
-:109F8000B89E7A64DF9DA487351FDF678AA51F63AB
-:109F9000EDC42FC9C5CC49F95301AFE30AE3F6C7B5
-:109FA000473FDE67233F591B650D635D67EC7CAA65
-:109FB00039E05750EF9631F293D53C3EBF3A885185
-:109FC0001DB863781A2BD1E1B1D53D8D9E2FCC748D
-:109FD00032A4B79A6C0AC4E31789A7812E93816FC4
-:109FE000DC926F3CEF17A31CE8F826108F6F06BABF
-:109FF000B8BE4238F4F46D751766C5A34F542F727E
-:10A00000BEBA125FCC4AE27E4EA785EBCD06C411E4
-:10A01000C44BF5999656CC7F9FB1F2E7CC5FC2FD59
-:10A02000322BE7B95949F961F4873A357F12FA655D
-:10A03000B37AF76DFDF4BD47BDCD9F721DDAC777CA
-:10A04000B8DF7CB2D2DEA6C03827CDFE14C4F7C973
-:10A0500077546529ED83F3FA39598774D2EC5D752D
-:10A06000353C9FFD33D5BF941E1BFDC133CC3FEC67
-:10A070006DF48F77ABB4DF52F0D3FBD421D0BF06A1
-:10A080001C45E4A75955F610DAE1CEF79B3F447D15
-:10A09000347B73827719D6B16C1CF625B63F5D9D73
-:10A0A000EC4DA03C5BA1E2C1FCD79A0227ED9B2CB2
-:10A0B00066229EBB7D7215E8D05FE2D4327F0D6BC5
-:10A0C000FE94C9E7A155E3609D5767769AEC00932B
-:10A0D000B221B4CA0AF47B7869C08DF163876BC67C
-:10A0E0002A8C1F5D2E7FD74D102F9E70DD3919DB16
-:10A0F0009D8FCBF1EE5AE507BDFCB22958A0C0F305
-:10A10000A4AC072653FD6A911CBF959ECFFAF95562
-:10A110005F1E85F1CB366C9C8C39B78A6AF17EE87C
-:10A1200009826FCE18D9DE9A543510DE4F62863C14
-:10A130009A391A8F529EAEB3D7BF7A7A32C69FB37E
-:10A14000C736576930FEB20D3B569582888C6CAF8E
-:10A1500074FAA1FDA30DAF4F4E027EEB64FE3A8C64
-:10A1600077576D3830D97A038C9F6E1C3F4315F9B1
-:10A17000D8D0E15598C7EB858FBDB7CA3F30DA7F9D
-:10A18000983B61752837CAFFFF2AF81FF8FD572E44
-:10A19000DC07B4761FC2145DFEE21E0BAF7B15F523
-:10A1A00029B9DD4379DD8D689774F33A65D976F383
-:10A1B00076E7B2F8F6FE2F6E2E779D89F19F7F2805
-:10A1C000F439C0EDC7FA9594A3CCBF238E3C1D741F
-:10A1D000D949FE0E82BF674D8BCAD5AD20DBA3B037
-:10A1E000FEC7CAE194E3C4BE7F4CE82716BA350D1A
-:10A1F000F9788AE0F3229FC2EB7876278507A1BF22
-:10A20000C722DA6DB09EED229FB1DDC6EE9D0A53E6
-:10A21000BB12597027FA9FE9D02EA5F7FD3BEDD16F
-:10A22000F1DEE2A2CCC61705B6E178E3B33C652DBA
-:10A2300005D17100EEE5D67203DCDAA8347C1ECAC3
-:10A240005E50AAC367295F07F009E10BA679F626DD
-:10A250009097CEAEAB0B57C21256B9BC86B8AFA220
-:10A260006B1A7D97F29F6EEEFF302F7F3FB38AD738
-:10A2700085F4EC49A23C05B37615239DE47B1705D4
-:10A280003EAA7E346503F6ABEF3233AAFFDF59797D
-:10A29000597FA01EF37A3AFFB15E8B503C578F79FD
-:10A2A000BD6138DE5B16B463388E57E4AF312F974B
-:10A2B000D9129FFED21ED65F4C65A1617DF56674F2
-:10A2C000FC0C7A7EA57545C733C69D7DC7B3887DD6
-:10A2D0000081774DE0DD121FCE0159824F01DF264C
-:10A2E0001D7FCD11FC06DA93FC80732F0EDEBAB20F
-:10A2F000403F2FFFEE06F4F3B337A1BEEC4AA4B8FB
-:10A30000A542F34FC6FE155D69B4BF20F943F2853F
-:10A31000A46B675A33E56B7A1E53C80EC6C2552C20
-:10A32000E1DAA8101C59D541F53E1D7C521E60FC97
-:10A330004E31FEF051243F4F707900B9B91BE5173B
-:10A34000F72B711DBEEEA1D386F485FF2768FF466B
-:10A35000101D39FE7F6D13F51C1C6F7DF19F730579
-:10A360007AE6D3F38AAED7699DF5FDC8ED5B6E073B
-:10A37000C1997534E2F042BF4705FF77767CEC184F
-:10A380008D72B15B658A97AF1BF55685D4C76CEEAD
-:10A390005B6341FF65F5B6415F7A910EBDFA3362AA
-:10A3A000B546FBBFE29E3B65393CCB48E0F29AA143
-:10A3B00082B5298FC2313D8BFB59A382F1FDD27743
-:10A3C000DDC9F45CE2FBB1C555EC6358DFCF5C7CC2
-:10A3D000FF7354774841BA48B98ED5538BB2B83C15
-:10A3E0002EC8FA7FA4A76C57D05336A9A7F8FD83CF
-:10A3F000101C613F97AB7BA802FE738DC9EFC2387A
-:10A40000ECC43B3FA0EF38E689BA952158B7827675
-:10A41000F36880ECCA697CC8EB571EC218704EBB4B
-:10A42000B17E856DE3DF89C6F255948F42C27F17F6
-:10A4300070087B706B42F7AF7891B1519E651BE05D
-:10A440006C3415E99EDBB9DD9274007A2F6769518F
-:10A4500039FEE8C5AC2DA86F87B9795E31A3C85F16
-:10A4600086EB9772097655F089E9DE6976AE37A6F4
-:10A47000C5E1DF27847CCED9C8F9A6F3BFAA26237D
-:10A48000DE3BDF4D4B5DA6D3134F093B28C7957AC2
-:10A4900048BE279F3F29F8637B9683DA4FB99245E0
-:10A4A0009EC714F7BBB9A774F695F8A78DF30FAC48
-:10A4B00037A4E7EF616EC5605F7BEDAAC0738305CB
-:10A4C000F00BF8DB6E0E6563DD4E459789C6ABD9A0
-:10A4D0009D4CF580351D1C8F35EDFB4C753AFCC449
-:10A4E0008EF71F59DC1FD862E27544074DC06F8894
-:10A4F000773B87EFDC8B1ED29F8745BF2BDB8D6FB1
-:10A50000A667B658781D29D097EAF91A5ECAD962AB
-:10A51000D4D34B05FE832DF81D5BC606E6C35A2B2C
-:10A52000C0534401B867B885DEB1F82DF8DD6ACFB5
-:10A53000638CF6F30755FBCBBCD06E0AD8CB15184D
-:10A54000AFB89DEBE18AB5E0C7A0DC59A55D787393
-:10A55000877EBE6359C9221EE1FC5CB391E36F1094
-:10A56000F83FCFE215C6F915F9F11C9E8FD6778C0E
-:10A57000C6FC937CFFB4A0FF95E0AB40F88647E1B2
-:10A58000C3F1919F983DB00CC76DFCC3AE1CFDB8E4
-:10A590005F66717D9BA1CE1A6B433DBF06EC0E49F1
-:10A5A00067703F7E9750B337D5B992913C9B30EEA0
-:10A5B00091F3D6883C24C85DC554585A71EF3C923B
-:10A5C000AEEF3DA75FBFE6E6FEDC3F8BBE9D96206B
-:10A5D000ADA76727C0EB8DE2A5B3E3BE6536B41324
-:10A5E00047990FED8484775075B703EB4E9A84FD3D
-:10A5F00080F59A307EC9F89997B520DEBAC65A30F0
-:10A600007E8AE56B49A712C6E547C66925B84100B1
-:10A61000ED3CF750A17F18C5BB1FBDF4CAB32B2971
-:10A62000BEE27469AAE674AC740767B833A3720813
-:10A63000FABC02F555CDDA5E7DD4C1EF77E557035C
-:10A640003EAF754B3937D22523D061C37D0DC9D7B5
-:10A6500067F70C09AFE474A6F93B3B92C38A82DF2B
-:10A66000A1362FC5B85BEA0984475F8729E1E9A5D0
-:10A6700023033A0E89DE1F54CDC76B0279473EAAE9
-:10A68000579B158F427A80F2AC59A807A09DD5C17F
-:10A69000FBB1BDFC5C0489A7FA193028C49D7E7704
-:10A6A00029AD43E22BAB3A62AA875B13AD55FE138B
-:10A6B0003A7FEDB0D86F40BC4CA37883EBEB7A3592
-:10A6C000908B712BCB4AA0EF38C10E917E39686315
-:10A6D0009A0DC67B03AE6897C6AB0BE83B9AF14573
-:10A6E0000AC931680099F789A03F7DEB4D4924FFE5
-:10A6F000ECEB0706E23A3393381FC23856318E9599
-:10A70000ECA0B007BFCF07BF4E89EAE5838A42E3DA
-:10A710001CBCE19AAD545B28F812C743FFE9A03294
-:10A720003597EC6567A6282EE2F0F76FCFBAF3F104
-:10A73000B93E5EC4F82E1A6F96ADBE19786AE4C4AD
-:10A740008E88C989D2317CCABF01FCE321DEB4C145
-:10A75000FAEF137C7DB020A43A10AE41B06EB8750C
-:10A76000283158DA6C8FCEE312F91B97A8DF457FAA
-:10A7700001AF260FD7FF3FF6707BF181B8BA1CF10D
-:10A78000F33D1745FF3FDBB99E5E5919FFBBED87CF
-:10A79000845D9171E7AD62BF03E2CE87DC3CEE14CD
-:10A7A000F5A77C7F04FC7BC26FD58FAA69DFEF8B96
-:10A7B000AEE929FC3C04AE0FE688FACF7B1F9AFE77
-:10A7C00013E4B31358670E78F844F0CB09A7DF8180
-:10A7D00075520D89F1EB889F14F034083C9C5CC2E3
-:10A7E000CF2F9883FB72C07FEBDCDCCF9BD77EDB67
-:10A7F00004A4FBBCB50AEDCBC9FD7F49E7DA4DAA3D
-:10A8000021BF3E07F7E5D2FF9178AAAC9F786AB8DE
-:10A81000219E92F3C6C6551F2D711BF60166B51712
-:10A8200089F32378FFD9CC4770CF6ECB31EC23B2BC
-:10A83000B6CC6FF4DD3FC651A1B8F0590CF73F5AC2
-:10A840006265213D1CA70652FDC443EEE0CB6E03BA
-:10A850001C492C64C8878E71D2F744369E87057FC9
-:10A860009CC73170DD62277F7D22FAB3BDF930D0FD
-:10A8700023CE14D44B95FBDD23A2F18394B3FA319C
-:10A88000F1E38875C20F5AE7E27172CA511957276E
-:10A890007A513F4ABF3CF6BD777BF9D7E8575E292E
-:10A8A0000F017C1CD2C749B1E39E72FFA3F177511F
-:10A8B0003FFC52FC3F127F578C09529E8FB52B54A0
-:10A8C000D332729C311EFA1AEDFA08BC2619E2A1A5
-:10A8D0009A6A633FE6E1F69F79920C7E7C7FF8D41A
-:10A8E000FBF14A11EA413E5EA3E08B82CFDEA57AFE
-:10A8F000D2311EEE178DC8F62778E0BA5AD493AF3E
-:10A90000B6F1EFF9B7FCF77EF76CF48FDE36D3FEC5
-:10A910003FDBCDF9A6F289452D783E80BD4371EA33
-:10A92000BF5FFD97C58ABF06E43A5DE8BB7A1F5F4B
-:10A930004FBD2F621968C7FA620E476EC73E45D3F6
-:10A94000F15D6E2DEF97E7311BF2E205A23DC0E30A
-:10A950009471CCBE4919D8DFAFA15F90DDA190FD05
-:10A96000CC6E66E457670F5768FC7F19BE45995D4A
-:10A970001A5D6F9B696AA913DE6B7325F9D0FE2CF3
-:10A98000C90E5EE541F88E4522682E471EEBD23097
-:10A99000DE5A93ED2F413CC8757A556736FAF14976
-:10A9A000C7387CEDBD79266E7F185B25FCD2ADDC07
-:10A9B0003F53D961C6FD73B2F3AE65256407E57AEE
-:10A9C0005C69C28EB85870979DFAB791DF62E57ED8
-:10A9D000806B5931F9F392AED1B8737039C69D4589
-:10A9E000AB23DA2C78EFA54DA6B8E7554C10788745
-:10A9F0007554EAD77125BD25FB99FBC93B4ABE4F6B
-:10AA00009A183F9E074B48CF2B9FC8B88BE473B969
-:10AA10008561BE5AE27F4D76E0768427BB638B82E8
-:10AA2000B8F948D4297C94C8F3F11FAD7C5641FF96
-:10AA3000F281F9CCA9B2FEE1AE5FACFA6BF4F2BCE4
-:10AA4000DC427491F14A141E9E8769F070FB7428F1
-:10AA50003B5083F46EDCBD86E2EAF9DB8E5B2EBBF5
-:10AA60000FF10DF1A6D4727FBD7EA695EA992A9FBB
-:10AA7000D088EE75CB2DB46F58BF63277D9FC61E5F
-:10AA8000643E94FFFA8E9D4A0DCC5BB763A73247B4
-:10AA900087C79CFA30D56F5F952CF72322E44FC708
-:10AAA000F237E611D07F3964E3F27FA6D21EC2FDF1
-:10AAB0008933E6603DF63BE349F2E13EA6C4FB1B69
-:10AAC0003B6FA6F30292772544F0DA66DAEAB642E3
-:10AAD000BFB6AB2D3EE4A735D9C1154897342DD06C
-:10AAE00089EFA76624FB707FC39BC0CAC97E7F43E2
-:10AAF0003C8C8CE18B910F72797959E817F8A37A25
-:10AB0000AA273DDC2FC7ED25D45787CC7C1DBB1869
-:10AB100087D7E4F16F443AB1C369346F767D44C19D
-:10AB2000FA8BD879A37CE5DFECC9FC3670765850F7
-:10AB3000CFD7097D53F9C436E5631DDCCF79548244
-:10AB40002F7BC71605F367F09CF40DF46758EF945C
-:10AB5000BD83C7AB75F07C8E4EBFC875C4D1339D25
-:10AB6000089FFD58D701AE67227CBF40C01B4BCF6A
-:10AB700088C74BF34F007781EE5B4225182F1F2AC1
-:10AB80004CA4F1A4DCC7CA69C4C3FDCAEC4DDB14F4
-:10AB9000939DF655C8BF94F0C97E23B2C71EF0102E
-:10ABA0001EBA080F0D9B345ACF784B60E0029D3CD3
-:10ABB000BC2BC67B7DC68774AECEDA7F7F87F8B1AB
-:10ABC00001E26C8A33DADFB14C473B13FA858AFB2A
-:10ABD0006093B98BC2D68B73A72677723DDCD0B950
-:10ABE000539B6D8FF269C167AFD379550D1D090C69
-:10ABF000E32BE0BFA3084F2C9F4AFC483DDB1F3DE1
-:10AC0000411FF1F829641179BE6001C63F524F9B84
-:10AC100084FC333BBFFF855857947F829F790C7A21
-:10AC2000D6467251F059F9EB58EFD9E053E8BC8E93
-:10AC30008C2A8E4F3D5CFA7830564F623E31C0E32D
-:10AC4000FBFC69BAEFBA7AF5BD78FF22D29BDB8DA7
-:10AC500008BFCF0AD17E4BF863E937309BFB6571A3
-:10AC6000F84CC91ED1D79E493B5FB0799786DFE586
-:10AC700048FE998C74D7F18F33DB42E33AB33582C7
-:10AC8000677D25DF8F5C6FE6766CFD522BD567BE46
-:10AC90007127AF174BBECB12C1EB41D3AC7A7C7E90
-:10ACA000309BC3D1665A46DFA9815CA66613FF3884
-:10ACB00018D78F5C1FAE7D81EBB3FA909DE2DFFA6F
-:10ACC000E0ED35540F9061F3611D2D0B1EB04C4F1C
-:10ACD000EECB57DE5DFB2C08FFE40E2E7F920EA01C
-:10ACE0004F89BFA43C48BC46F11936C893A487A934
-:10ACF000D79F0816707F89C75BA5E23BC25AABFF9E
-:10AD000090D98B710CCFCB968AEF09655E7696A0B1
-:10AD1000CB667BC087EBEC9397FD86F142DDE2DFEB
-:10AD2000527C76BFFB4DBA4AB985B8D620DF3709C9
-:10AD3000BA176773FB3E219BF34DDDF00E92CBBA41
-:10AD400013CD24CFF6895CAFD98FC5F88FEC11A154
-:10AD50008757D37BE3933A26E0BEF2F89F2B4E8CC5
-:10AD6000F7FB83731E7E8F8571DFA6FD8EFB10BF00
-:10AD70005F43D4A1FB5E67463697AF33DB01E1C486
-:10AD8000EFCD96CBF9E3571A8F458E28741E88C0F5
-:10AD9000E5991D55D77D82FB40DB537CF8DDFDE74F
-:10ADA0003B6EFBFE2700F7996D37F9D04FC8680955
-:10ADB00010FFF464DA7C5B799E7622E6B19676EC3D
-:10ADC00077E0F73DA79FBDB61CF576A380F3B317D8
-:10ADD000D4C5889765CF3C7F233EAF0B2BE9E8BFF6
-:10ADE0009ED9FEF3BF67C338B5DB9AF0A431D6F223
-:10ADF000EC6B141798C25BF8FDED29E4E79E7E72B8
-:10AE0000CD8D88EF968E167AFED9935BA8FDFA3326
-:10AE1000CFBFFA5FD0AF3EE0A0EF9E3F7B611FD176
-:10AE2000A53EA8517D7A7F7CBD7EE73EAE2FD1CE78
-:10AE3000A31CCCE47A4CF2B5E4DFD3CFDC7B9DDEFF
-:10AE40006EC8FB6D229FD396C8EDC8E7426EEBC675
-:10AE5000DADBF0FAF973363A9FB3D1D25D8C717EAA
-:10AE60007D29E78B07053EEA3B16981BEDF43E8DE6
-:10AE7000F39F20EF781D02FC897560D06BDB25AA5B
-:10AE800067FA15F5877EA330DF33A3FA38FFBEB328
-:10AE9000B4D95C47703ECB9FC3AAF5CF2B16C58FA4
-:10AEA0002FD767DB0DE7AA65774ECDF5921E48F0E8
-:10AEB0000DD2F9BFD9B5C19664B87FCBA2A00FBFA0
-:10AEC0008F7FE9D4BB13F03B86674A9461447F557A
-:10AED000E1762E64A7791A701F09E28FED424E20A9
-:10AEE0007CCDB81ED6335E6319F889EF78C68E988C
-:10AEF000492F3C45E3839F43FE9BF7B5194FA1DFE4
-:10AF0000B3DE1CF48CC071DA847DDCC6E187F79D6A
-:10AF1000F6721ACF793DF7D717E27BE7974EC94013
-:10AF2000FF1EC6ED32EBE231E0C87CB48F38DE7034
-:10AF3000C4D3C4D04CB2535E0BAD4F9EFB09EB1F84
-:10AF40007AF790A87CC6E69B503F617EF85076E584
-:10AF5000BEECCCE8D5D54FBEC69C03CFD19EE5F85C
-:10AF6000E9FA4DCF117D7DC6396EE75F3E4E7CDB41
-:10AF7000887C8BF3074F18ECBCAC7759BFE738F1EE
-:10AF80006DCD6EAE8F1B77575A30DEFA7C899F7D70
-:10AF90000C8E6EA3E0BFF54AF75CFA4E6C8F8DBE47
-:10AFA000FF3B27F9B3FDF8A7A87F0A777B289F709E
-:10AFB0006E0FE7D3832613E5010E6EBD664B8BD271
-:10AFC000D7AE82BF4D72D2D8CC84BFBDE85DF4CF7E
-:10AFD0001A6A793D7A630C1F156CFEA815F92515C0
-:10AFE000BC63ACB3017F66027D3F59CF46A09C662F
-:10AFF0008FF3EFC9A17D421E9F67D7823E81F62D58
-:10B0000019F37D78E455EA38F08B91FF326EF061E8
-:10B01000DE6C7D5E472BFACFA1F18CCE575D6F6E53
-:10B020001F8B71F0FAF15E276012F0B68DFC6B5643
-:10B030006211F6AC86FCF246F7777C94D78E95FFCA
-:10B040003D4BC9BF6BF426FAF0BCDBC9BB9585DC70
-:10B050009FB13384BF11F08BEDC9E1D16184E7ACBE
-:10B06000C09FC4E33973179DBB7BEED709748EE193
-:10B07000E4719C5F53C77590FE7863CFCD64AF25B4
-:10B080005F26BF9840763B4D732A98E760ECB60484
-:10B090008467B680A75DD4EBA60A3B52B49AFB71D5
-:10B0A00029395C9E52724CE26A117C2ECF6509519F
-:10B0B000DEE1ACA03FB189EE5CA7869A08C953FDDA
-:10B0C0000E3E5E4682BFEC011DFF4AFF4AEECBE218
-:10B0D0003EEDD438FC3D42C051B07921D17D76ADF2
-:10B0E00038F76135F72B18F005E20DE8487C704B16
-:10B0F000C63CA2DBECD5CA5D44C75005E53FA57F41
-:10B10000163BFE75627DDB6D81E158EFD79399ECBC
-:10B11000C33A82EDA97E13ED2394A5521E24339DDC
-:10B12000FB8B99C25F8CCA7D60B809E639E54AE6B7
-:10B13000F40EFF5EC3FCF6F81CAFF4FF0C7E5EDF7E
-:10B14000389F8F37A53D3414E31EB9CF2CF1115E23
-:10B150009A3853AF4F6F12F8080F6633516F403C67
-:10B1600061A73CBC13E6C17CC2D6D14FF27C023F42
-:10B17000FFB92487FB3DE3D303C3D14FCB2C0A2C6B
-:10B18000E2F693AF33161F87B2651C704F19C6B134
-:10B190008DB7DB7D28776B5F5666115F87AC7828AB
-:10B1A00010F03D97437098A8BE8D0535A247637394
-:10B1B000201C9FEFA7929C3582DF8771C064E4F367
-:10B1C0000CE2FB30E77B6EFF64BE01F5A4DEDF9688
-:10B1D000FA40EA19B46FC8CF522E1A6FEC2E46FA15
-:10B1E0007E53BD72CECCE5FC1CE001E548CA4DF2B1
-:10B1F0004B5C5E562EF556E2F39520F77A7AC7C679
-:10B20000670827C62B52BF2FC90E3C90837907537E
-:10B21000A495BE4115FAB8F1A515C5F1BE2392FA61
-:10B22000D82ACECDB48693C2FAFD12ACC1482EA75F
-:10B230006B08ED51D2E2F8F998D61C695FFBD4AFE8
-:10B24000B5223CB1F56B2EB45D283F5B93E87B36AD
-:10B25000999F8A1D77B1E037491719A7E0BE07F615
-:10B26000DF9AC3F9659DE8F76C8E22E4226CE07FDB
-:10B27000AF29781CEB0FFAB363F2BD7F56BE4CCEFC
-:10B2800023ED692CFDE5BE0DAE676A69FFFDDAF7B7
-:10B29000893830861F77093969CE61B4EE7673E458
-:10B2A0000B92AB05C98CEA7E36327F3AEE07BE7A46
-:10B2B0001597077F4F318E3F342FE8C81D11CD0BF6
-:10B2C000E37D8C4FEA34164A009AD46D3787F5DF58
-:10B2D000D33C95CBC73F9F6C0DA9C0E7FEBCE0BE39
-:10B2E0009C11743E087D3717FA818DF6B1C0911E0E
-:10B2F00081FAA589753B10CF8D6A5731E631AB5D78
-:10B30000C14348FF8F4C5DF9BCFE83EFB31D137939
-:10B31000DF6322EFDB6989E4FD5B46F41CBB0B8C29
-:10B32000D75F5DE832A5611CF8C1EE3F3CF732BC47
-:10B330007DF7CB67EFFE21626B65D23D3F836BB536
-:10B34000550D68BAFCDCB1E4F87AF6CF82BEBDF5E3
-:10B35000514B13E2E6FD9FCFE5FD9A62F6B59FCF14
-:10B36000E5FA34FA7D14DFD7FEA09FF3AFAA72B9D5
-:10B370005EEF14755BB1CF278A79B69B59F146848D
-:10B38000674B32D503308D9F5B56FB68810FF7F119
-:10B390003B0BF939F93DEB14B203C7CC5CFFC0DFBE
-:10B3A000EDD68AA81D453705FDC45A67286202FDFF
-:10B3B00051BB283982E765C27D6D0CCA5AC849F570
-:10B3C000C3B3847D9CDDFCC65798F7A8D598750C4F
-:10B3D000BC77D25EE340F330F7BB0FE051342CABC7
-:10B3E000BA5DD4998A73D8FC53D44B4997F3EB8C4C
-:10B3F000DF97BC901B30E7C2FAAB5338BEAB1FE0FF
-:10B40000E7F1CAFEBB85DD8BE5B7EDC8AB00EF8782
-:10B410000AB72FB1F364E78DED40FEAB76079CC809
-:10B42000C7D50F9C35E8B5734AF7D33F43BE5C9050
-:10B430002CCE4763F9FA3AA521B95C6EEA70DF0CAD
-:10B4400054E3F9B2AEE2C505C8FF3DF97FC4BCDBE9
-:10B45000DE04AA73AEC3FD33DD7E777FFB67FDEFAD
-:10B460009B792DC8E78D1715E293597BDF388A7ACF
-:10B47000BD51EB26FE9965B5137D1A2F6AF49CB574
-:10B4800099CFE8BF975BE4F65F83EB0BFD684C2A2E
-:10B49000EDBF65C17DC273099DB7B150D49767E711
-:10B4A00005CB11CF1B921CF7627C78C1CACF576ABB
-:10B4B000B2F03A7226BE43967CC272938D7CB0F78E
-:10B4C000CDAF10AE1A6B90CEA99C3313E26915E98B
-:10B4D0001619E12CD5D37FCCB73A27D7857A03E06C
-:10B4E000FFC0C2EB88FAF23FA7C3F342BF7C90CD06
-:10B4F000E5E8837C56BB0BAF57C315DEFBA050B409
-:10B50000CB793B769C7A21471F0CE5F62BB430298A
-:10B51000EEF920F708797C21D77F07E255DE7F52CC
-:10B52000C0919DE7BF13F108FAF16EE2AB14164922
-:10B5300085F1AA5FE3BF57C096F7501D6BEFBA8A3B
-:10B5400005BCAEF8702D8D8E5B83E3413F3FF9F172
-:10B55000AFDAE83B383605F435EAE785790CF533A0
-:10B56000CC5B8FF3C3B89154EA9740EB606DA0B702
-:10B57000817FCF8FF0125D5656029F0E17E7EF7B4B
-:10B58000A37C25F929968FBE9FABF4B7BFFF7D84BE
-:10B590002B767F9FB181446FE2B76FF13DD9E8749C
-:10B5A0008E1790FB965CB2BF91217AB9937896FA88
-:10B5B000F28344235F240A3AAE12FD7AF12CCEB313
-:10B5C000CA28E27650C60B3F13EB72C45CA55D8BB4
-:10B5D000DD1F7008FA3B7279FD14D06503C229EDB6
-:10B5E000611F7A6FE2F4867E9B488F25F4DC930E10
-:10B5F000F6EC0EF093F03C4B78CF85EFF5C95B8C01
-:10B60000E376B8696132433FE1E95C51F73DBC87BD
-:10B61000EFDF95F4903E9AC540EF2857A61FE60845
-:10B620003CA00F9FC7FA118043C17AA43452035E35
-:10B630001C0FF0BD3337338AEFD8F98EE123F00BBE
-:10B640005FCE15DFD995B132A4D73DEFFC35F96E49
-:10B650002F9E77CEBFEFFDC41E7C0DC739F3FD379B
-:10B66000290E38668914B7DBE33CB744366F50A225
-:10B67000CFEFFD851AC2DFB7E8EC3AB36E06F0E50E
-:10B68000AC2ED58753CE7AF08BB747A27FDD65A667
-:10B690007D28F02F56E3799FC7445D216B36E6097C
-:10B6A000FE24E82EBF3396FA49FA09F3998FEBA5E9
-:10B6B000447EBEFA470BE6D177C6352C7008CF57CB
-:10B6C0003FBD7012F9CFF35890CEF79EDD663C5F18
-:10B6D00037F65CDED8F37831A18FF88A3D97F7F31F
-:10B6E000EFC5AF9BE9CDBB57C5F737B43CCECF9F75
-:10B6F000F753AFFE37C1AFB2BEA049D617BC72F93F
-:10B70000FA82A698FA82A83F22EB0BBEE6F505AFB7
-:10B7100018EB0B3E1F1B1F8EAF7BFD9DA47EC675D5
-:10B72000D0FDCF0B2FBFCE263C6727EE77E476BA4D
-:10B73000DF5F7D43A6C4533FF51DA9791C4F4D170C
-:10B740003D067B9C99E78DF1C772E979534C9D4486
-:10B75000F439AF8F90F903A02BD5E3493F30F6FBC6
-:10B760007A99DF97F2F3B1C2AC1ECAB7AD11FAD421
-:10B770003714FDE68FD11F43F9BDD9FB6A37803AF4
-:10B78000FB87D7156B8551F98A5D0FF0E567FAEFF6
-:10B79000D807E789F3207CCC47DF390AB9B8E7FB43
-:10B7A000E353707FF6CF0F5619BE5FEBFDBEDD226F
-:10B7B000FD40BBC19EB3187B3F7BF79BE4E7D558A8
-:10B7C00003F41DDD27AF7C9FECFC5C1670A19C9CF4
-:10B7D0007FE5AAFCE0FF859D97F0DC16BACFCCFD93
-:10B7E000FB0CF24FA609786EDBCBFD4C93D56FA610
-:10B7F00079FCCCEB745108CFE105658BE7E8DDD02F
-:10B800000B7F299DBF3146C0AFE0FB80DF1BC49595
-:10B81000CD0ABA116E792E00709D1BAF2DD7F9BCE1
-:10B8200078BD4909684CF7BDE804D69C8BFD4DD620
-:10B830006E559C5746E7CC2744F145ED64D15E7EBA
-:10B84000FB857BE6E07D3B3FAFD822E0B83F4F7CF5
-:10B85000076D65565C77823D729AF60FC535349652
-:10B86000FBEDA1425E979C88E721C0BC76FBD91016
-:10B870002ED6C99CF49DBFCD792182F18BEE77261F
-:10B880001AF346E87E678245785EABBFE731BF4377
-:10B890009126E06B117AD283E71516D1B90CA42753
-:10B8A0007F9A3C97CE27CFB42FA27DEDC71C13699A
-:10B8B000DFD38588C77AFB89BA7315E07966C078CB
-:10B8C0009E42D64C63DB1334B6ADEC18D587299174
-:10B8D00080FB527AF4DC48B3D037B72772B86E4F8A
-:10B8E000E471DE237926833F1290BF0F93C6CF5DAC
-:10B8F00038E7B25AB14E03FC9347F2B87FF22150B9
-:10B900001AE249FEFB316537F907AD1B8EBF8BA2EA
-:10B91000FA96019D5A93BD4B35F4FBEE14BF23A656
-:10B920007550FDC3967B527D58AFD36A735662BE85
-:10B930003494C7F3444DE2BB0FA048DD0E786FCBC3
-:10B94000B41CEA9751D54379D69E158CFCAA3E7C4F
-:10B95000FA35F03FE0FB496CE3791035BE2EFC0E62
-:10B96000D8E357A96E593EDF86CF014E45F005DE7C
-:10B97000BFA922FA3B4F457BCBF6E379962CA8F87A
-:10B9800078DAD24BFC3E5DF8F34D7B2B6F1D0170D6
-:10B9900015750D23361EB857ECD3642488FD667EDA
-:10B9A0009E6F6CFF81D81FDA4987BDDFA9C7472684
-:10B9B00088CFF1BDB149B4EE23224FC5847E18195A
-:10B9C000237FA3A3F240CFCB44BB49D417E2191481
-:10B9D000FE0A9E06A17E195C3E7C4CFE71B9BD9E9E
-:10B9E00045FF709CAAE8B8A4A7C6451F47E5109676
-:10B9F000586EF5B5D443BF8353F9BEFC482DB20F42
-:10BA0000E57DB4B896892B9BD54EF85DB934F2BA72
-:10BA1000B90053320115DB15CE152D38CE0D4A84F1
-:10BA2000AEF933D7B4209B5D9D5F24F241C1F1286C
-:10BA30009FADE3F9F7D22DA37C3E273C9A3193E7E3
-:10BA400071A7CFB4521DF6748D9FEFC4B460C11DB1
-:10BA500020677754F3FC31B6AB75F919B95F7204FE
-:10BA6000E29B9D71FC83ABF3B95D93EF3789BA21FB
-:10BA7000F9BC389FE7CBECF9134EE771F8685FF833
-:10BA80007C9EF0D34A5849CCEFD1FC350FFDAFCAAC
-:10BA9000DFF6A7278CCF859E98EE7FD44CFEBDD0D5
-:10BAA00017522F07443D54973897E5BDB11CEFEF6F
-:10BAB00056CE277D713B6B267D7E070B9911BFBD4E
-:10BAC000FA7FA2CE3F8279A6078CFED28C99B17EF6
-:10BAD00015E75739EF9D41E3F369D2EF9D68F47B99
-:10BAE000ABFFEDEB54B28B594F375C1A10AD7B6A4C
-:10BAF0008AA97B6A14754F4DBB171CCCD4D53D3534
-:10BB0000EDE5754F8DBBAF54F7D443FB4F47CCE108
-:10BB10007DB82F73643E8804C0B95FD4C91CC03A95
-:10BB200099F2285F264FE3F959605FDA67C97526F5
-:10BB3000F9909FDA4CE594CF6D7324FBF4F9D3951B
-:10BB40004B81EF74795C59E774A49FB8B83C9FFBB4
-:10BB5000C1EB159E4F0FDD69A53830B32860D8BF03
-:10BB6000C854D951CC4B9E167ED07A912FC1FDBFBF
-:10BB700061700D2BDCBFE97D1FBF9FC23C668C3E10
-:10BB8000CA4CF7D1FE4166CA10DA0798B9B76C1BE8
-:10BB9000E91BBBCD87DF07C8F16706B768587FD4BC
-:10BBA000B4778B56638FF2DDF87CC1AF492C09F96D
-:10BBB000B5372FB82B81F2829FD80393F2E1FD7A3B
-:10BBC0004B642833F233DDEFCFAECD13FC621E1B86
-:10BBD000B8730EC073FE6D0BCF8F3DC8485E5FD843
-:10BBE000934A794D6D1A23FBB2BC92F1DF8BD9A237
-:10BBF000903F7732959F43B47C2A233B782E6D0289
-:10BC0000D16F3E0B1FC273866A37990DE709DDBFFE
-:10BC1000CDD8AE671D646FEA77F4E167D25B523F1F
-:10BC20003630AF8A7AA8B1D3F83E1B68D48F65C28C
-:10BC30001E0C9B3EAE05EB3C8699B8DE620FFA7295
-:10BC4000A651DC5DCDED287B9ACEAF3A9F7C4AE5CC
-:10BC500072CEF5F188A8D634D8A511C2BFBA51E387
-:10BC6000BFB320FDA511E277170E98F6AAF41B3F8B
-:10BC7000029EE1E23DE9A7497D2DE952390A7F3371
-:10BC800002E2F07CE1EF14B242A42B8C4FF2A060F0
-:10BC9000A0C48F4CA6DF6F182DE603BAF3F3EB4C6C
-:10BCA000D630F251ABD24C7ADACA84BE5682A4970F
-:10BCB000FF3D1452910FAE63CDB7E1EF818EB176A7
-:10BCC00025915F6A0FFE44CF272D2C92BF5331F090
-:10BCD0000B3D3F93FADBB8FC22ED4AE43DEE6F4C9E
-:10BCE00066E007C2BCFEF7B91F7440E1F122F88399
-:10BCF00007305EFCAD6912F1C3245806F61BEF3421
-:10BD0000D2F966B7B13DC9DB870F54FDEF5980C446
-:10BD10006908CFE412633FBFD46FCCA8DF0AD8D73D
-:10BD2000BCAE7EC5A1EF62DE2069312B413F063CEF
-:10BD3000475FBCDF2BDD85F68298A0CFFECAAEFC44
-:10BD4000117DF757CE8B3CF1F5AC7BEE0EA52FDFC6
-:10BD50009C3BB85875EBF84BF2F34BA21E43794D60
-:10BD6000ECE30EE7F9C2A89DE77C53215AD723DF05
-:10BD700041FF3F483D207E77E486DDB608FEAE4EAB
-:10BD80009918E77AE49FF2A85D8F98EC5E4B21F258
-:10BD900089AF4D55FBFAF3AE342FF1CB30939FF8BA
-:10BDA0006504F3A5239D46593B5A34847FCFC89C34
-:10BDB000A0DDC01F7FCC47FBA7007F503EAB8F7D2F
-:10BDC000343E8FE11F49C7C3C28FBE9979298E982F
-:10BDD00028FCE84801E79F2AFBED1ABEFF4621CF69
-:10BDE000378CC38D47FA6ED56817ABAC463E88E5F5
-:10BDF0002F98D1A49F3796DFFAE39B01C837D22E44
-:10BE0000A65F996FBEEA9F6FBEBA1CDFC4F28BD4E7
-:10BE10002B3B6DCE2A3BE6B76A15D2C7C3DE1ED8D0
-:10BE200082EDAB1A0AA85E6667AA6F3F3D6FE6CF48
-:10BE30008777F955ACA7295A249E1704AAB0DDB418
-:10BE400098EF678C38C2EB6D063EC89F972D6BDE6E
-:10BE50008FDF093685F8FB2F9D6EA5EFA5C2ADE2F9
-:10BE6000FDCAF62A6C37B5F1F74FE2BED4B55827B4
-:10BE7000176EC1FB835717F87858CAFDDA9B049FE9
-:10BE8000EE5476EDA7F7DAF97BF30E5913E977084C
-:10BE900085DF7AA358E74D9BF83A333EBE857E97FF
-:10BEA000744E4F88FCA74F4DF5F4BB37FDC59F95E9
-:10BEB0004A7B2E5E6F467D8287795981AF0BF9BE32
-:10BEC000E5569862C400EE0FCAFD3EAC3FD0D71BCA
-:10BED0008C18C0EDBEECE74AE3DFB5B1C793295F2C
-:10BEE0002CF723231B98827A19D728FC80B8FB9360
-:10BEF000371735D3BEE4CD03E4BE64B786E7B29707
-:10BF00005DFAEB847879963162DE53A29E42DEAF11
-:10BF10000D17D0EF8CED4426A1EFF29FFA3DB5C589
-:10BF200039E34C7C07B7B380B76F19B0E5276D10C4
-:10BF3000BCCF33356B782E1BCB57E83BC07FED620F
-:10BF40009114475FF86FD658C4C2BFE323F8E7B631
-:10BF500058B6F2EF31B95E9A2ED5CE984124A7B7E4
-:10BF60000B3ACD1820ECD330360CF5CD7441B73BED
-:10BF7000ACE0B7925E6B37C7C8FF7706A0FC3FD630
-:10BF8000AFFF6C7C1EA31F6AC5BC7385DF3C1F7F9F
-:10BF9000CF54C5F3E2B9FF7CEA31EE37DFCF3A2860
-:10BFA0001F79FE71EE2F36C0F2905FFAFCDED77675
-:10BFB00063BBA123F6776643347E9FDF712DE5795D
-:10BFC000DDF38F3554607EAF76E3DB943FAE95FAB8
-:10BFD000226CD417E060707DB1E16ACAEB98ACFCCA
-:10BFE00077368781BEC0BA9461586F0AE30F15E7B0
-:10BFF00000ACC057C4F7FF03486F4CA47A541A4FE3
-:10C00000A57DE0B7FDDE287DA4DD88D51765325F0C
-:10C0100033308DF259527F94093F854D8C8D1FD757
-:10C02000921C0E13AD8D92BE220E927E07BC4F7EE7
-:10C030004797C91E3699F47E4698E4B2DC0AF68228
-:10C0400044C96765E23C81183A6FC2755D268E323D
-:10C050003E8FE10319C754083EB893F9293E7A513F
-:10C06000F0C1BBEFF1DF839B6E5F447CF8DEFBDC4D
-:10C07000EF9471D4B78F9F22FF50FCD44B771BF8FD
-:10C080009349F8BB169306ADC3FDF44E1BFFFD6B41
-:10C0900085D3D975E7917C7D7EF15DFC1D17DDEFC1
-:10C0A00043B44C4AB0E23E628B99C717D3267F5007
-:10C0B000314BA73F86A45746105FAD4AD7F7FE84A1
-:10C0C000F1C69BE23CD6BD9944F70B5DFCFE854D65
-:10C0D000D7F84270FB73B338DF4A699E8B25541240
-:10C0E0008EB9E2775FE6A9E157BB713F5609BF58A9
-:10C0F000AFD0EFB4FC0EE5B2CE14B1F0BC5E17E5E4
-:10C10000E9E5F8FDE72943145F5B5EE7F6B14749CF
-:10C11000F4F13C6FC8F0FB3FBFF3F27C943F2FF08B
-:10C120003ECE23ED5F6C7DC2B10537D377AE7F6322
-:10C13000FE14DC175534FE7BCFB1F3623DC2725D55
-:10C140009EFA982DFEFEC129A16F4B105730EF4388
-:10C1500039FED338FF2911179E12FB63A71C7CBF41
-:10C16000EC6F03781EBCC4CBDF4B14D753623FED9A
-:10C17000549A319E94FDECE27A628935B05C47575F
-:10C18000EF868466CC4B641689FA93458CC74F7B47
-:10C19000520DE72E64792B4BBCB8CF5124CE2DD84D
-:10C1A000C3ED32EE63E33EF313D941133EFF3FFD8F
-:10C1B0002524DF00800000001F8B08000000000025
-:10C1C000000BD57D09785445D668DDBEBD857487E2
-:10C1D000CE06618B9D7D0F9D0DC3269D8428B86082
-:10C1E0002780A06C0D0804C8C6E27CCCE8BC3406ED
-:10C1F00011F95CE2382AFE2E7F83E0EF366384A0DB
-:10C200005103D32A8330EAD820286A465B46013599
-:10C21000242D2E836F783FAFCEA9AA74DFDBDD6CAF
-:10C22000BFFABD47FCACD4ADBA75EB9C3A7BD5A93F
-:10C23000345A897D7B3E21C4EAD34F2D20A44F225E
-:10C2400033DB4DB4D4D1923EEF8B6265B65522A458
-:10C250008C90C1D69A6C6B227DBEC2A7277250BD4E
-:10C2600086D6D3A0EEC8B6D27E7DD3453BAFDFC322
-:10C27000EAF49F860C226401FC66A5A5D1E4910B2B
-:10C28000E9EF1B743DBE6C6C276753099164E22291
-:10C2900071B4924DAC0E333C1D673996478B28DA4A
-:10C2A0004EC769D29B364823B1BBC348C79BC3C79F
-:10C2B00023C3CD5A187F361B8ACCE9DAFF93144387
-:10C2C000C85C23593F8CB6CFEB1AACA7332075312D
-:10C2D000AE4C0BC04D265A8ED1EF4AAE68F96C3485
-:10C2E0001D1BFE4D082D09D19263627E08878B10BD
-:10C2F000807B8417E1DA58E14FFE8F5242FCBB0C81
-:10C30000962DF43B0D5D6F1D91285C0D02BE0E2530
-:10C310007C651C9F8418DD5F1809B99E4864201D48
-:10C32000A7D3E42C037C36187D384F3AA2DE41D7E0
-:10C33000C575E7B858847F307D9FCEE7A5163BF9D9
-:10C34000A72E80CF9516067FB55C5FA54F20E4D45D
-:10C35000CDC462A08F56EE5FD86AA4F59577110B15
-:10C36000FBBA5D4346D1F139BE22CD2FD1A1215672
-:10C3700023AFC367670E20D6EC407D88334E51A7AC
-:10C38000E31298C7723EEEB0BAA18AF74734A72AE3
-:10C39000FA5FB62657D19EE22A56D4D3368C51F492
-:10C3A000CF68AB54D4B3365DADE85F44D206120A11
-:10C3B00067D33E99B8296A73DCB58AF6BCA76F5279
-:10C3C000BC7F9C343F348EF6EB888A2924948E5AA5
-:10C3D000A362B640495C766F3EC5CFCD1C8E82F617
-:10C3E000058A71BE89B9721FACEBCDDEC5D7124A82
-:10C3F00057233B9729C65D2ED7B3756BD31DF5D157
-:10C40000F79AE90FE0B398F8F70EA3F4D1E8966C29
-:10C410001EDABC64136B17EF2DEDDC8CEF2D752B42
-:10C420009F2F7F5A59775592EC66CA9FBFB59A13D2
-:10C43000901E8692A16783F82A4007B413FDDEA9F7
-:10C44000C764B72105F093F5F038C48F8EB8ADA15D
-:10C45000EB758A109B07FA3F6FB6B9687DC9FE85F8
-:10C46000381F4392920EA2AC4A3A88CE56D281D956
-:10C47000A65CF781E5CA7557E337D69E7B4EFCC6AE
-:10C480004F52D285C06B39FDF939F1FA24E0333AC5
-:10C4900080CF923DF65613E2894C338E02FCB1F9FF
-:10C4A0001A884306394712A89CA1CF6D6C0872D236
-:10C4B00062726928FDECB04ADA63C6C038455ACFCB
-:10C4C000EB00CF7AC945E0BD28E24E0279D15AEEA1
-:10C4D00049F6D075293636C3CA912F4D8E97414EF5
-:10C4E000D6EB3D85D02EC6FBD2E4C4E73DD23B8BD4
-:10C4F000098597683D85280F8D04BF2FF0386A00A5
-:10C50000A3E3E5C48172F8254ECF5F7C5487785C45
-:10C510004C9AF7DAE9F7BEF998E177297161BF45DE
-:10C520006D4A3C84E04F85374A3656F86E13877B58
-:10C5300019216E4D5A283EA52EC9632E0434740964
-:10C54000B9ED3C5BC2C80EF03986F4FF43F92DF01B
-:10C550004B3B48C1F209BE671914F89EC0A7905B17
-:10C56000E23B06D22C27011FA8E418C956AE1301DE
-:10C5700021310AFFC37FAF52196A8CE31F1B04E30A
-:10C58000C0E409B99C7F872C7026019E8CA40DD72E
-:10C590006FA364DB20D3EFC897A5B4128ACF128BA8
-:10C5A0005D86F52A23DE59F0BCDCD8DEAAA5435D02
-:10C5B00046CE58909E063FD570363E008724E072E6
-:10C5C00049444BEBE3797DAA4BF23D9A02F0BCF56E
-:10C5D000137C773C2FA74249D78F82F9CF4FE8CB06
-:10C5E000E324EB08F85EEDAB59894037EBA566A272
-:10C5F0009ADF91D7E838B2C61F0FFDAA8953CBF452
-:10C60000AE1BF5CD5B920FE77D03B1DF01A5D06FC7
-:10C610008DA4FDCA59B4DED841F5560C94511E992B
-:10C6200096A453854FA23D0A750D8504E87B39D445
-:10C63000C5BAA704DAB12E87D6D7521886C49D5F33
-:10C64000BF3F9C62E1FAD19FC9DA997CABE3F8AABB
-:10C65000137ACBAD9C5F37FC328490BFEA294E8AB7
-:10C66000818F8C2ECD40425253385F169242189FD4
-:10C67000F255660A1D7F501CE5432998EF587FD17B
-:10C680001EC2772AF849335DDCD114DFE652BD9330
-:10C690008ADC85C1F05E003E841DB10CFA02BC2923
-:10C6A00056AC370CE8FEC00ECDA5DE64D0FF629D0F
-:10C6B0009AF4C409F618694FC4EF8AE757A7683897
-:10C6C000BE283D5E009E22AF433ADA43621D2ED45F
-:10C6D0001E1A1BCFE62FF0E708C5F734053E09C543
-:10C6E000678102DFD3C2E29BE3E36499F72958270D
-:10C6F000D97C6810E0797692E346E83FE288EF98CB
-:10C70000A409CCAB5AEE79EA51D0639DB20D78B949
-:10C71000713C93738DAFC8C8FABD5D06B744C7A915
-:10C72000EB7C13EDB39E162A487591F1D40FAF0A36
-:10C73000DFA1F860EB28E059A1827FEE81EFCC7396
-:10C74000AC08E72DE7C1C32DE1F0F0CD6FC83C4741
-:10C750003EC0973FD0971FF86E315FF7DFC7386E46
-:10C760004DA1DF2F7D7F780CE0A75AEEDA3B14F065
-:10C77000B05AB219E8772718882B8AAEF39035554E
-:10C78000E49F74ADCA7DCD360BC547D270934DA6DC
-:10C79000F8C8BA4576B8E9B8FF58BD2A6E212DBF52
-:10C7A0006EA19FCEA0CF258D03E98D6CFFF4777429
-:10C7B000BC2CF36CDB465A9B63A0F3A1DF49F94D17
-:10C7C000B4278DCA89BFE88911F84D97DA7C703299
-:10C7D0001DD71F2BDBC00E4E90C944A02F81E784CC
-:10C7E000680687785EF1F856C9670A3C9FD0EA2F41
-:10C7F0005949CB19B0EE6501382754F94BC0EE11F9
-:10C80000784E4863FD89D69F5C1BC41F65800FDA94
-:10C81000DE0D761DC56763A27E3DE8C15E23AB13C6
-:10C820007B36DABFAB8D8C3FBAA392DDA01FBB294C
-:10C83000AC5E1CCF6326A620B918651F7839859B8E
-:10C840001C90C9365A7C6FB10F8C457C58D838DCA7
-:10C85000DEEA256412E069F5E4CAC171B44C6C6586
-:10C86000F851D3C9AB29CCEEAF3F4D19AF24F0BC82
-:10C870005EEBD15B4CF05CAF787E94E2CD6508D482
-:10C88000179C48BF92A09CB1AD87FE0B374413574D
-:10C89000907DD5C1E711092F8DB15AA2A5F86894F2
-:10C8A00088E35CFD5EFB6F19F1AB9EFFE7BC3DB119
-:10C8B0002A3C7C47003EDA5E75E7B50F83FDD9E878
-:10C8C000D511037DB4FA958AC124CC78FD783E3D1C
-:10C8D00096B8E383EA5A1FE2A3F1F415F8BCEACE56
-:10C8E0001E3DD03D8C63A5CF5747D907DBCE81E7EE
-:10C8F000323E8FC6D3B1C4151FFC9CC993C0F80942
-:10C90000D8FE2C2090D2ADAB53766FA3AF3EBB4F79
-:10C9100033694B98F9EA5319FCB9895AE4973C0FEB
-:10C92000B16F0EF37DD16F501C95D72686E79A82A2
-:10C93000D0F97554FAE6C2FC2F9F48ECE1BE779A15
-:10C94000D38B9877479C6F31A7FBCC1A7350DDA22D
-:10C950005CC7442E173AAEF625C3F8BD93991F1F46
-:10C960008A2736CF51DA6609F05191E42C02395208
-:10C970003F8356289D0C9EEDD138F3037C1769DD6B
-:10C9800003F8A6FE57C9B9F0ADC77631DE570739AF
-:10C990005F12BB49A2FC349FEBADF95B975F4B651F
-:10C9A00067BF1FF3D526EAC7D04F7C459ADF3443D3
-:10C9B000BD4D423F658193903554EE2CDE56B21E3C
-:10C9C000D4C5FC2442AE8863CF6F83729D2EA06FC6
-:10C9D000F1FF7612AC1FC5F76FBE5B69BFD691BB86
-:10C9E000BF05FBE7AB834C3E508D867EF8E23F2AC5
-:10C9F000C7ABDB7ACD7198679DCA0ECA02438FDA46
-:10CA00002185A9DC4F1B4546811E58B9ED3B7D8C25
-:10CA100035321F7C4DF93D3D03E4A505CB8A547B9F
-:10CA2000592AC4190EB0793A529DA353219E72809F
-:10CA3000CDEB54FD29A6271E4B40FD6400614E7FBF
-:10CA400035CC32BA5BE93CEEA4E2248AE2C76060EE
-:10CA5000F690B0036579951C43DB477FB93A0ED653
-:10CA600037E1B9AB26C17889CF45DB019E8D15F63C
-:10CA700022881B6CAC31D95AE99046FA3EE80FF790
-:10CA8000B3A3DF180A5642FBFD95C380ECBA5EF7EC
-:10CA9000405C6583E6DBBDC368FF0D57105B2B0967
-:10CAA0007CA7A9ABE645984FF234A66736A6D88B8B
-:10CAB0002C41E3126ED73572DCF5EDCABA6F2C5DEE
-:10CAC000DF47F7A1594DE14B1D08722397B075263A
-:10CAD00067289E289DC0B783EDD71EAAAF4856A0F1
-:10CAE0009EDB2E7974149E868E1735A00FEB6FF7A0
-:10CAF0000C9A057AE919AD6D4BD0FC12FE32A4D226
-:10CB00001A13D047B3240BDA0BC23EBF91887FF9CA
-:10CB100048373339DDDCC8EDF259D10CBF0B882D15
-:10CB200019DEBBC948623494A56655B597A1BE5AB3
-:10CB3000AE8B053B096009B7DEA28C145F6A7CCA24
-:10CB4000EC92E8BAF74AFE4C18E46B88F9B03893D7
-:10CB50007B4B4AE838EB5399BC68CCE476623AB137
-:10CB60009B29DC8DBBB3366FA44D8601741D8B51A0
-:10CB70002E19CB8BD14E3682FFB3F4B5288F141308
-:10CB8000C00BB1D88B34102FA81D5EBC116CD32301
-:10CB900054BE5006EBD5F992918FA9DC91A8EEFB1B
-:10CBA000CF2D936BB494EE1A87523B8CD6DF4D9DFC
-:10CBB000C1EAA9BEC51A5AFF614B33ABE7FA8E41F1
-:10CBC000FDEC965B6BB4942F1A8B7D8B655A1FFA24
-:10CBD000E45DAC1D1C424A58594FB6D5B8E8F85F21
-:10CBE000C772FD6EF3CD05FA697C354BB33108DEB3
-:10CBF000F83426B7BE8E62FDBE4E21F36A01DFD93E
-:10CC0000BE4C98A7E8F7AF546117B76129E014EF5D
-:10CC100091A4F0E3FF99BFB7B48ADB25D16403E0A8
-:10CC20008D2E932B86E27F4F57D616E8FF406A1C65
-:10CC3000C7171DA734308EC0A3184F7C7719E85D45
-:10CC400090C73A166715EDAFA532F949BFB30EBFCD
-:10CC500093CFF0DF583BBC08D68DAE9796AF979632
-:10CC6000F9AB9BB13F8C1B5B88F2BF444BFBEF39A8
-:10CC700043FBA704E6ADA68F7D9C3E96B652418845
-:10CC8000765A1AD2D18468661F9252251C43399E67
-:10CC9000E3D362199CFDEB3158C2EFB4723C0EA78E
-:10CCA000782FB878B83FE6F3F9B9E10E5A2FBB0CEC
-:10CCB000ED9D395B82E121E47EC5385FAF55BD57FC
-:10CCC0004E1910E6119786EFDD19458CF89C6CE93A
-:10CCD0007F2FA590D9A560AF3670BB9AB8AEC0E0E3
-:10CCE000423D971A0D1BBC7A2BB4B74B7637D067F1
-:10CCF0003A850FF05B7B6D2987CFC2E1B330F8DC5A
-:10CD00000A3A2587FCC9D3CCA1F4DB8FF7FEF1F2F8
-:10CD10008BF9780ABE0E371EF047A4F530A5FDCC7E
-:10CD2000EB21E6A9C2673F9E55F313F8047EC6F7D0
-:10CD3000F295F4D84FCFA9621D557C9D7289DFAB67
-:10CD400060EF35FC96AE23D82756253D3774A4688E
-:10CD500016E407DEEB84B52C0BC4E946A6717F6FA1
-:10CD600038190EF2DB55C9E2A9AEED065BAB15E34F
-:10CD70007B2569E1E37BF85CEDEFF5C5EA89847614
-:10CD80009132DED09768F3DAC14E3D496CDBE8B8EA
-:10CD900063557607ECDB6C3705DE0BE81365DDC504
-:10CDA000F920347EE44F86F9951A2A77586D845C11
-:10CDB000F7E453289F4B0756AE4AA1F5DA279F6642
-:10CDC000F56195DF418866DA93CFA03C2FCDABFCAF
-:10CDD0002E15EA69CFB2F609F61D32EE383C5B3308
-:10CDE0007148C07E989E6665F6479586001D19E4D9
-:10CDF0001536D093029F91CA5283A6399CFD3AB74B
-:10CE00009F9FD9BE4639D7CFE5C29FF76915FE7CF3
-:10CE10005F8CD1250F847D2EAA4F29BC4BD39C0B50
-:10CE200001FF4DD13D73C114BE3DFA533DD843922D
-:10CE30009DDA1B101FB15AC86C3A4FA967A303EDC6
-:10CE4000C06536A316F1C9E35514B6B3749CD77602
-:10CE50003F73EB30F61907CC6334E7FFA6DD3FFDE7
-:10CE6000F809E8D1AF4D3608078EEE7A6415D85729
-:10CE7000A3BBDEFE89E95B13EE5789798F86B82361
-:10CE80007D5EDE69C0F98FEECA5904FDC7BEDF952D
-:10CE900006F431BEDBD30AE2A06FD7CBC39CC1FB43
-:10CEA00057E4B87436EFE2ED8B7E7C7CA927605F97
-:10CEB000527CDC919608F838B318E28BBD8907D70D
-:10CEC000FBD04E1BCEE299FC7D6A9767039F9F22A1
-:10CED000036CB0BFD06766E3A8E39C476A287CF484
-:10CEE000F9783F9D4190DD3CE1B4910A9040BD82CC
-:10CEF000C42AEA55C6218AFED5961445FB55493900
-:10CF00008AF6C9D62245FD9AECD18AFED7D92A14D1
-:10CF1000F5EBCB272BFAD7D86B14F5224FBBA27FAA
-:10CF2000C9BE4E65FB212BAE4349B7A30AEC799BE2
-:10CF3000D7D90AE5E53D6D5503AD2424BE5BEA7300
-:10CF4000B7C2F3B1679ACB3C2434CE4B9639715FAC
-:10CF5000C000EB2207ED135478911F7B35366B70C0
-:10CF60003C77F620E7ABB04E6F4914ED14D9571853
-:10CF7000FDF1B05ED5F3EE9163605DFC04E35F1DEF
-:10CF80007ADFBD6341CFCF91D1EEEDD012B41F3B1C
-:10CF90006616B821067844F2BDF409C8A939D1282B
-:10CFA0004FC6530B17E186BD5009D6C9A980BB8275
-:10CFB0002C55ADD30A45BDDAF25B45FFAB92D62ABC
-:10CFC000DA275BEF52ADD3FD8AFA75B64754EBB45E
-:10CFD00059B54ECF28DAC77FE16B05369AD0E39278
-:10CFE000CD74FE638EB455C1BA8CED76CD017E2929
-:10CFF000F5385B5184EC697E134A0FF5AB20AEF532
-:10D00000464B12967B5AAC1897DADB928DE5BE162A
-:10D010001B3EFF5B4B3996EFB4D8B1FC7BCB242C85
-:10D02000BD2D0E2CDB5BDAB1FFF6964E2C290647A0
-:10D0300080BE4888E7FA87D6C1DFEFD5F81A61E7E6
-:10D04000D59FF6BF514EF60EF0F542FD76D76994A6
-:10D050008B9FA413946FF119ACFC29DDBE2ABD8C03
-:10D06000C914E44F9D6903E881768DBD08EC6B6DB2
-:10D07000BAE60FDA1184DCB1D6916489657523AD07
-:10D08000E362836346347FB00F27E44FA03270938E
-:10D0900045530BF5BE28D67E364D53EB42FDC0F608
-:10D0A0009DA705F69DB5E961F69DFF74C26A867875
-:10D0B000CBC133596680EB208F2FD949916E3E2D1D
-:10D0C0002BB4453AD08B47547684283F335598018A
-:10D0D0009E768D6D3AD829AEAB75641B9517B51247
-:10D0E000F347FBEDC074666FF75D67407FE790C65E
-:10D0F000BE08E89CCAE927005F195BE36A41AFF408
-:10D1000099FDC98087B4ADB1AC9EE87F42B205D528
-:10D11000750CCEE15B2DB5AEFCB070A6C07CD470B2
-:10D1200066A6F3FD068F7D04E85F513F54636F00F0
-:10D130003D71A8C29E01F339E83020FFB81C667724
-:10D14000060839ADBD6C7A50DCC59DAEC3F7A6E9C3
-:10D15000199F919B64F7B6307EDAEE7466EFE3BAFE
-:10D16000813F776334DAE18734A46E7B183C7EC05C
-:10D17000F1F3CD80F0F1970FD3991EAC9C6AC6F104
-:10D18000FA5647E1BE6F9F230BEDA0BE668A25CA03
-:10D190001F7D279A4FEEC47683D812C3FDCD595C0C
-:10D1A0004EFDA96BD50F8769FF4F5747DB50865B54
-:10D1B00072513FDDC43BCF8937A2DD32A7764425CB
-:10D1C000E8A5597C9F6CAE593B08B7CBB4B17A0B3C
-:10D1D0001DE76653D17A50FF8B136AF4B1B45E3702
-:10D1E0007CC57A2897A5DFAF8FA3657DFE8BEBC149
-:10D1F0007C6CA0AC5586FE92EFDD163AAF796B647D
-:10D200002BF39FB85EB32FBFA87319820E018F4016
-:10D21000A714BFE8171EE1F816EF1DE1F85A9CCEDF
-:10D22000EDB602527056B9FFB30CF8A167CEBB99A8
-:10D2300011E2F4CA766EB77DA067DF5DFEB4CE1D45
-:10D240001C4F12DFFD289DD9D787F4C42E811D778E
-:10D250009319E9A370E677B79751F80BBB2C1ADC4A
-:10D26000BF1772DC4B307E5FF68513E5DCE53DBE13
-:10D27000A70E13A4F34EE093F3E9A9A9AEB5A81F36
-:10D28000467F4FF50FC8C533CE4F0FA31CACE372DA
-:10D29000B019E5D79E963558DFDBE2C2725FCB0648
-:10D2A0002E07DBB0FD9D964D5C0EBAB91C7C1A9F13
-:10D2B00077B5CCC472778B93CB41B6BF5ACBE969B3
-:10D2C0007692F33EC093D8C79C6674EA005F7F7D78
-:10D2D000C44064D89FE832209D520E78E2D10438D1
-:10D2E0003763B06CB4869E9F51CBDBFEF557EDF7EC
-:10D2F000AE4EB23F0AFCDD7F5E06ECB3CB22D3CF4D
-:10D30000416235833CD9917E432DC8E78356AB19E2
-:10D31000ECD68EADBC6EB79A75B4BE337D06CA9797
-:10D32000834EABD940EB2F6D9DC1DA5D567314ADC2
-:10D33000BF9C3E93D5DD0437B7BBD2E7A09CAD20A0
-:10D34000D21EE0872A63CA442AAEA97EACD8037CE9
-:10D350007055D2FC89C00779E956A4C3C9D6B57BFC
-:10D36000A07E4DF6666DBC15A2A145EBE0BDCA845A
-:10D370001A2DBC3771F88A75F0DE95E9F76B83DFFB
-:10D380009B94FFE23AA85F6BDBAC057B300FE45661
-:10D3900062601C5117ED42BE8AF35D23BB1C28C797
-:10D3A0000B3B1D28C7055E2AA7D5DC0171BAA64E26
-:10D3B000C922C13CA649FD9BF612B5211ACF506E79
-:10D3C000A172F6EDF4BAB8B514CE26A88FC1FA1F33
-:10D3D000D68697BBDE70FAE543CEA7A0376BE83858
-:10D3E0001F52FE81F368360E5F53D77CF37CD4570F
-:10D3F0004E33E8D7515C5F8EE1E5325E36F1F233B1
-:10D4000093FD63F8CEE791F9FA4BA00FCAB78BD919
-:10D410003C42F85AD9CEF9FA38C72329F52743BD3B
-:10D4200081B4619CF07CE7BC9606FB6F29705EA21C
-:10D430001DCF61A8CF4BD4132F1BAF5D75DE82F8D3
-:10D44000F4B80FDA19F41CE511F73F0630B93713B9
-:10D450008435381D1914EEECB0706B3312CF09B758
-:10D46000B29DC3BD94B8F17C9B1A0EE24C44DE5AC7
-:10D470006E3A84EB190A8F2F3C3C217030FF5D9C83
-:10D48000671171796A07256494811C341388DF045D
-:10D49000CB89C3E790136A79F473C9B973C89B1C2D
-:10D4A000C09B5ADE88735AEA52D873B4EE82737AFC
-:10D4B000AEDD5118A73F697596C2387D95FE1F35C0
-:10D4C000E09F25F890CE7E3FCC7939E041D2B3FD84
-:10D4D0007AFA4626ACDB098DEBCF601755656C41B7
-:10D4E000B9D30BCA81F2E3585A07BBE7F1A18EF119
-:10D4F000F01EC966F413E95CE7C40CA68F424BA288
-:10D5000038DFD8B7F9A7648C639D87DE23E1A15A81
-:10D510001EE77381BC2F8F4693A747221E89DA7FAF
-:10D520003D1583D08EE819A1D742F973FB893D23BD
-:10D5300032717CB5BFD833A4DCC8BE7BE524283B60
-:10D54000F5CE4DF3C14F1A6D403FE93D7E2E704A36
-:10D55000343B47F51EEC13D37E538E9E4900FDA548
-:10D56000F6377BF6CFAEB41686FA9D14CE890067E7
-:10D57000FDE79A3BE0D9C5FAA1F56B7E24DA78BACB
-:10D58000AE6BCE106DC985F8A5440671517CC4F60A
-:10D590002694655F78E30AADE07F0AFB81FBA7E78D
-:10D5A000398F54EE67F6C28433245B5B0A71A6019F
-:10D5B000B87F2395BFCDFC565E8A7D91716C0A645D
-:10D5C000AEC6E4D6A72ACE23256969395BF68D82DB
-:10D5D0007A2FF1E23E89DA9F7D8BC7A1A85FFB20FD
-:10D5E000D0ED7A7E4E89AE483CD06FF5EF3E9A7B07
-:10D5F0002BCA8128B487FAFDDA9D1A3C67D0A1B501
-:10D600000F1C0F7EED9A0CDB5A5AFFCC9BF8E06B97
-:10D61000B46CB2FC887813FC5BBFE63BC4A7A8F7E8
-:10D62000F0B86F9B8EEA1F5AD6FFB78C7AA89E90EF
-:10D630000DB86EE40DFDCA20BD48DABFEDC7FF4846
-:10D640002AF76A0081A8172BA7DA69BF1AEE7F10A4
-:10D65000F226AB73BF8BB852A7DAE9B83589BCBFE5
-:10D66000EB21561F21DA1F66FD33C478FFAAC5FAE5
-:10D670001051E7E3E588FA7BAC9E22BEE767F5022E
-:10D680005137B3F1CDACFFEE6D3BA6823D22E4FDF8
-:10D690009E0CAE1F8B48113F9FB30FE57FE47329AB
-:10D6A000CA76AE1FE63D23BBF423617D2647BF0B40
-:10D6B000FCDD2EE119BAFADB7418EFFE26AEBD7060
-:10D6C0005590BF22CEB138AACC76B0FF1A5ECADA26
-:10D6D00022F3733D607F10BE1F5D2D9B707FE2D4EF
-:10D6E000DD4CEE47B2DF16AF794DB19E21EDB2C4ED
-:10D6F000FC71D8B8A3DF3B79CFE0CDE85FA47B71A4
-:10D70000FFFC588624F6E949795CE0DC58421AB1FE
-:10D7100083BF9AF03295CFB0C65F78511E2F7E99A5
-:10D72000C57F1B1E7913F5DE02D98AF1DCEBF29D71
-:10D730003D809F5EB317E38A8BD7ECC679FD9F1CB3
-:10D740006E3758FCF9C1F8FC3E14FFA7CF83FFD316
-:10D75000BF26FED571E765A63D08EFB28B3CDFD64C
-:10D760006B66FBA236BE4E4735D6511C5F719910D1
-:10D770003F5FE4CD8C95E1F0B177103BB7F44E19E3
-:10D78000F845A79ACD04D67DF6AA7F143AC3C47D86
-:10D79000D5FEC0CDF0CDC400BEAC9921F84DCF2C44
-:10D7A0003B277E95EDBF307E076B7D7A1BECA31E79
-:10D7B0002138CE28EF517DF0F99889994C0F0FEC64
-:10D7C00064FB46EA735F1333CDCC6EE2FB330DB5D9
-:10D7D000EF8C83FD19C10F13A2493BC4DB295DDB2C
-:10D7E000385DDB80AE05FD06F669E87B61F82B400D
-:10D7F000BF4471AEEF9A4C6E5F06F07A7DE6B9E9F0
-:10D8000056D9FE0BE3B583DAC3B8AFB9330AE329BF
-:10D810006A3CAFE47815F86ECD64FC1F09CFAD808B
-:10D82000E7C49F1FCFAD9956453C42E03B927E52E4
-:10D83000AF8F9877183E2DBB143ED5677339A5F589
-:10D84000E17953F5BA6F0CE5A77BCFC34FF7FE9A8A
-:10D85000FCA4C69BBAACE7FB9DEAE7CF678AF3015D
-:10D86000BF0C1EFF7F8BA7CF697E5DD13E6FCD7E43
-:10D8700045FB7CD701457D9CCF5B05642EE2E357D9
-:10D880009CF0BF09F54B8DB3478AAF4FD9B1440324
-:10D89000FB6FE55E16DF6FC8764A5974DDDED3B8DC
-:10D8A0005BCD14AF9777B7CBB81FE62EC27DC055BE
-:10D8B0007C8EDF8DFBD7A7B752BAF98E1830FEE900
-:10D8C000793D476B2D08A5838AD332B107D98915D5
-:10D8D000C6582DD85315D4520E4737FA2C467778B0
-:10D8E0001E88F2FB4C23D125503E9F3953C2F34F83
-:10D8F00033093B574D4B8F93B64FD1128F81D66B67
-:10D900004C5A8F01F7FD58DEC374364D62D01217A2
-:10D91000B4938478F483A7C1433A5FD92EE379B6F0
-:10D92000E9E56CBFF02653BB0EF4E98DFB6E3F7941
-:10D930002B6D27EB5C65ECDCB6C863FB587331FBE1
-:10D9400080FA2CC6E77D12DF5796743638E7AA7E38
-:10D95000EFE34C06EF1479AD0CE75FFC0708DADD66
-:10D9600082EF287CFB0CC52C4F630CC049749EAC25
-:10D9700018B09FEFAF82FEF587AC8897A6F2B58509
-:10D98000B08E4D13A5CF0D8501FFA669CDF768A711
-:10D9900057CBCFB742FF53475868FCF21E970CFE97
-:10D9A0004A207EE99B0B7C793E3F48CCBBBBC583BC
-:10D9B000F4F469CB3E2CDFBBE2ED32B0337C2DDEDC
-:10D9C000B0F1CB4B8D17883881881B0839F0D96DA1
-:10D9D0005583812E6D595C2E18A561201788969568
-:10D9E000425E8ECA0A91AF63B2CEAD5795EDBFB01D
-:10D9F0007CBD503AAF4F627A514DDF6ABA16F44C93
-:10DA00005F2B93E8776FA2F61EE8D559C455504FA7
-:10DA1000E5ECCC256DBAB1D2A5D3F532D317C92424
-:10DA20004CBECAC5CB732BC22F57C9E81F88F30A57
-:10DA3000621D1AB242ECA115E759B715BFE6BA85C7
-:10DA4000EAB52FE65E9A5E230A7BE0EE50B8DBCEA5
-:10DA50000377DBAF0A778A55E4D1CC953581BC11C9
-:10DA6000384F0C765C9F9BE545D6A5B4C5E0E1CC6C
-:10DA7000727F0CD88D4B77C94887446BD70EA1F4C1
-:10DA8000BA84D36B0FF17C00F4B864DC12CCA7AB82
-:10DA90007B2CFCB9E246DE7F99A9430F702EDBAAEE
-:10DAA000ECD7C8CF15D73FAF8C8B368EBBEA388CFE
-:10DAB000DBA83ACFF35216CF4B2C26C5ECDC85D22F
-:10DAC0003E5597BD2D4411AFEC3DD382F180DD5919
-:10DAD000FE075CC383FCFFD0F5DB97756E7B4ED9E8
-:10DAE000FE2BD3AD6CDE8AF955174BB76B73EDFF88
-:10DAF00080790B793C1B6413FDEEECD70C6E17ECB0
-:10DB00008F9659597C5372B7C27E5BDF4F04E3474F
-:10DB10000B789C33527EBA386F30FA90BB959D37A4
-:10DB2000B0CB902F3A6A9FA30AB62B4ADE69467B98
-:10DB300024E2BE95C8B3E2E7872E54AE89B8DEA8CA
-:10DB400013CD6867D9BC16B487C69C6E7F13F4E307
-:10DB5000CF15EF16FA706C3CC35BA9CF81765EAF30
-:10DB6000CE53F621D809AF4485B51362B3D9FA4D27
-:10DB700075CDD7B1BCC390FDC0D86CBA1E53B9FCEB
-:10DB8000D718ED3AC053B5DCF3E00CA01FAF8CF111
-:10DB9000BDD5BF7FFFCF8F5ACFEFF73759BE43BBFD
-:10DBA0002192FDDFA461F917C555563CE707FE1425
-:10DBB000C4F744BC4FDD7F426E651ACCAF5A1EE7F6
-:10DBC000B5C37C36B1F9445A9FA635DF2AE28B9162
-:10DBD000BEDFB4ABCCB220880F6ECE9684DF613945
-:10DBE000660CACEF85D2C178FF4C85FDF3FFBA5FC0
-:10DBF0003145A6A625D59F05929BD9AF84D9B1B34F
-:10DC00008917CBB9C48FA593B0F3F70B880DCB9BC5
-:10DC1000793EF3811CE74C58973E9D7F109E9F7C78
-:10DC2000E9DFF9403727AF18DB06DB5EBF941DD76D
-:10DC30005764C5EFF7EDFC77329C83399F5C589DA4
-:10DC4000645F9E1D66FFF9EF15F24C966FF518EABA
-:10DC5000891A7E1B0399C8F6D1484A0AD243402E3E
-:10DC60000EDE2CE422ECCF167CAE61E749964AEE3C
-:10DC70000CDAB5D3A741D62A5894E296A1DEC1DAD0
-:10DC80000B1A62DD12AD178C8E62ED2B62DD104730
-:10DC90009F437CC88FF3A82884723E61726F21B1C4
-:10DCA000B37C07E24F053B6C5197919DF727BE74FB
-:10DCB00090EF8511FC9FB7B299DF3C3295C9F39183
-:10DCC00095CA38C53D5C0EF4E6549EC8A6E5A96C1D
-:10DCD000FBBD80979171DE8D0F9462DC9E80FF709A
-:10DCE0007CF46F71BF51BC97985BF900F47B416283
-:10DCF000E7D35DBB0C783E82BE31C81174AEFF40E5
-:10DD00004ED523D0CFCDED928878257E45FE6C8010
-:10DD10009F5C38BF91E07361BC9C3E28C7EF62FDF9
-:10DD2000C5ECDA69EB4C18E37781DD9B98EB7C1648
-:10DD3000E7AF27C404F37FDCE0DE82F6697332C408
-:10DD40002B973C61D080DDF01155B79087F2498B5D
-:10DD500011CB7F503F18CACFA81F0CE5E7D40F8620
-:10DD6000F29FD40F8672D1E922AA2C283FE5D8DF92
-:10DD700064F41D3E4FAB4BE05B7C7F971EBFDF9B87
-:10DD8000E344FCF6AFF72BC40D9B3A2FC4FA87C6C9
-:10DD90009D83DE22CB198617B15FA86EDFCED7B583
-:10DDA000B0438BFABDB0D317B338A8DF816C3DCE3A
-:10DDB000B360E7179887DA6BE9C7AF5DA2204FD150
-:10DDC000B0FA81EC3AC46F6F8EFD04C04DF9FB30A0
-:10DDD00094859DEFFF01F27FE8F878EEA04FF23FC7
-:10DDE000847E800A0E351E045C2FC47A37C2FB2F56
-:10DDF000EC4C0548A8BC218C6F808EA470F0AEC599
-:10DE0000F95E6FF097425ECBF567E5B0E78C7B7308
-:10DE10002A10CFEB04BD093CF1F5BA54BEEEDFFF8A
-:10DE2000E6744AC43D1E203BADA087CEC480BD57DA
-:10DE3000C3F7F73B3BD2DF03F85CFB64926145FA22
-:10DE400055F0DDB01C4627A22CD8A577C03ABDB04E
-:10DE5000EB58FACD265C97F445B47F744E8622FECB
-:10DE60005830FAA7FF782001FB5BE0533792CDD5FD
-:10DE700070FE6496F1F5BF0248732C9F57C3F99367
-:10DE80007949D25E28E75B53AE847327E27CFCC2FB
-:10DE9000EC8ABDC04AD7DA6AD04EAB00E112A40FBB
-:10DEA000AA8CD1B029D85FAFB6C42BEA57250D5341
-:10DEB000F49F6C4D53B45F939DA76817DFBDD65692
-:10DEC000A2E83732CE9F0AFE198503F9816C93F1DF
-:10DED0009C5EC1CE4357E7D1FA94A7A6DBC02C794C
-:10DEE00081B74FD95EE586F5E8A3F8D45303EA4439
-:10DEF000F95D0F3D0083A9ECFFFA5D4FEEB55B2F96
-:10DF0000C2FE8F60F70B39BBBCCB580672F642FDE0
-:10DF100000F5FA8CCE51FA0591E8A69F2F242BA389
-:10DF20009BFD32D916866E08B99DD3212BA71C64A0
-:10DF3000F963172BCFBE0479161FE08FFE52159799
-:10DF40001BA9B7BDB70AE2F4EFCA04F3F1785EDFAC
-:10DF500062F85D0ED03BB979F31D4312F0B90BECBA
-:10DF60005CC82FB5D3F157E470FBA9FEF53B86944E
-:10DF700006DAC9EACF15FDC96DD27A457D5D8AB250
-:10DF80007E77C5FAE0F723C9C5C59BE6EB9D98FFF0
-:10DF900029D9DD61E483984FF51B5178AEEF3A380B
-:10DFA000AF421F35961ED0C23EEC7511F4A8903FCB
-:10DFB00037CAA4395CFB6D392CCE7FED1B51780E2E
-:10DFC000E662C7FD88E212CF19BECCF4E84703BD74
-:10DFD000DAE075BF93CFFB64D9FDBFFF11F6475F51
-:10DFE0002178EEF3642C93FF851DC7351AD0830387
-:10DFF00018BD145A7C1AD02B7D75D12E38D7DFB4BA
-:10E00000D4CCF25F52FD1F18E9D2DF97F3CE1F8DFB
-:10E0100074DD3E8624C820BDDA074E11AD6F7AE666
-:10E02000ED69EBE8FBD7BC11E5D15C023C9BF8BE87
-:10E03000C4C84AC6E773816EB87E81187BD31DA41D
-:10E040005FDF805C00F8A1FE5ECE7B87FE0876F87D
-:10E050007EC6E770C24EEDDFCF0AF2EFC9638C2FA8
-:10E060008DF4879D5352F1F79E36BDE99C7CDE8E80
-:10E07000E76E2E94BF77E4F03CE1C8FC7CF01ABA5E
-:10E080003E4DAFB07B2D4E7565605E6C247DDEB479
-:10E0900049463EECD75F5DF22437EA29651EBAC0D7
-:10E0A0002BB1DB903FC5FD512BC7FFAB16F4E6CA81
-:10E0B0005D5A764824D27736C8C41AF49D17761B69
-:10E0C000EA30CF8DCFBF4FE8EB5D3FC455E4B3726C
-:10E0D0006D18BD47F5B42E01F4748D847EE5E15DC5
-:10E0E000832B014F8725E2B162DE163BA73C950DDD
-:10E0F00007CF4D786F4952369E4F16FEA5F02BA7DD
-:10E10000EF9A9E0176E5071D0B0ED39523C772D2B9
-:10E11000908F661017DAC187631D23202E31859FEB
-:10E120000F381CEBEF01B97C787CB404FBFD74FC68
-:10E130007530BE80EBB0CE3182DD3F21CE25E75E6B
-:10E14000D27D71D5F26D15D7C0FEF66C6201BFF2BB
-:10E150007A99D9B9E42F8C3F85DC6B92BC7130CFB2
-:10E160000339B5A773289E06AFB997C75539DEB4F2
-:10E17000EC1CE285DAB9FDFEECD312BB17C5C6EC88
-:10E18000FFC671DF3C3803F2E4A8DF2DD1F92CE89B
-:10E190007C1DEFFF51FBD9FDFECEFF309E1AEA2F0A
-:10E1A00039E27283E2E46ABFA9DF4E17F6DE367603
-:10E1B0004EFECDF10FF72EA7F5D5DBA2118F5F3DF7
-:10E1C0006170811CFF6A8B01FD9FAFE2FCDDABA09B
-:10E1D000BEBDC0E6C2AFD914F7A32DD1583F04FD90
-:10E1E00043FEA6C37B3D8E3F6EF0C0798FA54FE600
-:10E1F0006C017FEAF808EB73CF433CF0B944BC678D
-:10E200008038D9FBD7717E04FEB252D343FE2F3340
-:10E21000DA114B770C413926D6EFC4E3519847FF0A
-:10E22000D5BEA903215ED6A37911F378886C7281DB
-:10E230003C5EBE250AEDC035166729C05FF55FD785
-:10E24000CD2881EFBF9F48009EBEAE1D18AF0CAC1D
-:10E250006F78FD7EAA2B8DC9817E7DCBCEDDCE83EE
-:10E2600073B76978EE760C8CDF40C4FD8BECDC6D07
-:10E27000B12CD931EFE09EF079E4D7E432FBB15E06
-:10E28000C44FE2893109F8D04910DEBE7BB2B680B6
-:10E29000BFB330378E7FD7CFF32505BD7537BE8628
-:10E2A000F113033BEF17157E1F7B462ECB2B5E6CC5
-:10E2B000FC5E11BF695CF39322AED2984F50EF160B
-:10E2C000B75A4B56D07215C7F3EA54C74D00DFB2A8
-:10E2D000F6FB5F7A07F1F2D86F3E86EFEE3361DC32
-:10E2E00086BCC3F0A7F667161BBFE5FCB4596107EF
-:10E2F0001F7BE4433C6F726C675E21ACDB02D97B11
-:10E300000CEEE5EA357B3FBD9596DBF71DC47551F4
-:10E31000CF3764DF5E6272A51EE08887F32E8EE63B
-:10E320005CDC1766FC7E746301E24FC473FBBE0ABB
-:10E33000EF6F89798AF1C5FCC4F8A2DFFFE2EB75C3
-:10E3400052EF2D04FD9C06FB166581F69331DEC26B
-:10E3500058133C67792D27E3683D886E7EA9FD9DA3
-:10E360009B789CE78866ED2D7A4A7F3DED0FE89C0F
-:10E37000C172F422F775C47CC5B9529147FB9FB9AD
-:10E380003C9E3D828C88907FFB646E59D8FC5B7C00
-:10E390001E29FFB63FDFF607966F2BF26B4BAB34AF
-:10E3A000CDC179B6421E96E6D1E7F9B0EFAFD4EF12
-:10E3B000A52395FD23C9C7F1796C1D4BE3C3E7BBCA
-:10E3C0001EE2EBDC4A3CEC1E42AE17C772BC8BFB74
-:10E3D000BF849DD2C8E5B6C8F31CDBC5CE6D8EE503
-:10E3E000793B540A609E6BC83D6F4979A857C53D7B
-:10E3F0007D121D6B765CB87C612FCEE30AE2C7D23A
-:10E400004E2C5A2829FAB19C481C585E499AB19C56
-:10E4100044DAB0BC9AB463792DF16249723DFCBC18
-:10E42000E76D2CCF74F2120DE8D7D219E1EDE21F9F
-:10E43000CF8B0717DE2378B178B892B0FBFE42F09D
-:10E44000313C1BE95B8D0F75BEE678E2C38B4B2632
-:10E4500000E1A6811F6CC5F3AD55C48EF5EA0BC46F
-:10E4600043B9CFA965F9BD2A7C5485A78BB31C1F7E
-:10E470001B40779605D6A9348FC901B15ED4114BE4
-:10E4800002F9AF5E47F1BC34BAF23B2B1511C3F26F
-:10E49000EE988E79DC2595ABD268BDE0B907597D41
-:10E4A0006CE50EC8F31E99F7F074CCFB1E5959A207
-:10E4B000B3C17D729BA64FA4ED4E7E6EDAC9CF4BE1
-:10E4C000136791E29E2CE7DA5BF0DE31E708930DEB
-:10E4D000E01479E1721ADB5F4D9EE4794347FBED6E
-:10E4E000B23807E595C139734F8C15EC84B5D578F2
-:10E4F0007FD49D7AD65FDC6723E013F7DC6CDF9E68
-:10E50000B74A4A3DFF3CE8F8E97989309F0CCC8F47
-:10E5100073EE94783E5CE5E099546EF4787504F2FD
-:10E520000BC4F72CA9CE1C980F81A478CA17C3B8C6
-:10E530001EEED99E9707EB549AC7F30713524A0071
-:10E540008F0B521DA5D05FE44597C2BA24462E67B3
-:10E55000E7D98BA1BFFAB9C8CBAECE7396437B5334
-:10E56000F419CC37EB2D7A7FBD2F25344FBDD54E16
-:10E57000DC7A942BCAFCF4BE457ABCCFA9D4E16CFA
-:10E580008523CA97CFF68FC27CE13C67158EABF727
-:10E590002517D1F7FE3895E5BFABF3BD77EDDEAFBC
-:10E5A000C86F177CD69FDF7E8AE5B707F8EB9155D9
-:10E5B0002428BF5DF08DE0BB3190DF1E03F59C4544
-:10E5C000D06FFCFBDD98DF3EA1DBC7F3DB3F54E6F9
-:10E5D000B7DBFF7549F9EDC7F9BD6FC78DECBE24F8
-:10E5E000719FD4CA9D6CFF77A5C4EE935AF9277624
-:10E5F0009F94F00BEB387C0DFBB7AD877DBEBAC79F
-:10E6000016E27D5484DF876AA53FC17EA1B89F547E
-:10E610009D07D304FE20DACD1EB4BBD4F9304D8F54
-:10E6200055A13FD8A4B2A36FC9E3F11DAECF08B77F
-:10E63000FF96F077010E13FA677AB43B573EBECAD5
-:10E6400066813AE72BB2EF7912DC9F3C168FB4203B
-:10E65000F86CE90609ED5781BF914F19EC789FF1ED
-:10E660005383D16EA5F636CF6376337F9BD20A9C57
-:10E67000877F21D69F0A76F20BBBB26D54C29257A8
-:10E6800023DE43FDBCEA1EEA2715F7509F82FF8177
-:10E690009D7642E386714691ECFBC6D17AD909ADED
-:10E6A000CD6D0DDCCB7CBEFB8705FE0D7CBD2EF653
-:10E6B0003E62F5BDCF22FF417D2FF19DFC5EE2F170
-:10E6C00011EE2536C85D32DA0FDF6B15F7135FCE1A
-:10E6D000E12CB71237DCF73BA647AB58FF725F1B44
-:10E6E000017B28EA90561147305895F597F3787CCE
-:10E6F00080DF2F128A6F533F3E0D88CFF487119F22
-:10E70000AAFB9E059EFAEF7B1E6E42BA1FB37F875F
-:10E710000CF2E062EFFDFEB5EFF93EDFBDDEEAFB95
-:10E72000BAD5F77347BAEF5BAC7B9167A5A2BF7A06
-:10E73000DD4BF6FD4E791F355F6F17FDF939D7FBBD
-:10E7400007D57AFF1B2E40A37CF8F7981377035B5D
-:10E750004E896672ADDFAF1FA7433FEB3D6B7C95E3
-:10E7600019F89FEB2907D753E4B676DC8777707AE0
-:10E77000B179D93982E223ECFE8A521F3B4F30EA4D
-:10E7800044F8FCA0EBCB25C5FE6EE8FDC52CCF7888
-:10E79000EC19764E4FBDEF2FF2866AEC51CAFB1B87
-:10E7A00022E41189380EB5E3891EEC780DBBCF2E1B
-:10E7B000CC7DC79BE4B4E03C2227C677A619BDC92F
-:10E7C00040CFF129CECBF21303F9461320AF4842D4
-:10E7D0007F90E7E124DC0071C73E48B21D4AC8675C
-:10E7E00077C7DE80F70624108B6F1473777176F984
-:10E7F000CE6C18E7A864595F42DFFDFB986F924129
-:10E800003F19605FBB18F77D73A15D7D4FBF4F63FC
-:10E8100045FBC2F53B09FD876F60B0D141FCBA41B1
-:10E82000C7F31A557FC780FB53E2EF181CA543D4EA
-:10E8300051B93DA793E5512F4FEAE17E18BBC7754B
-:10E84000E17013DEFF44EC2536E6870BFF6A987C07
-:10E85000317AF37CE78B96277DA5F073C9F3F11726
-:10E86000B49F18809B8D7FF4AE68D43747EF1A8130
-:10E8700071BEC0F8BDE8F7CF69569E339EB7E62358
-:10E8800005FDCD777DAE68F725F875C328FCBE97EA
-:10E89000865C398BE2EFE44EC328E033BA6EF3F2C4
-:10E8A00083FC7BDF3D5913991D703E38BFC17974DD
-:10E8B000F373A202CE4F5B8E60DDD7E2539DE7710A
-:10E8C00029FC5251EADF20784F8E5F1A600B1767E0
-:10E8D000399ECFECF66E9E07D9CDF320BB79DE6270
-:10E8E00037CF53ECE6798A227FB45B2276384F31FA
-:10E8F0005B723C315FC2FCD1DB00CEA665FE42C834
-:10E90000B76B1AE99B2BC9983FDA925F16367FB432
-:10E9100010F2DE5F797EF60D60D79F18E0C27B496A
-:10E920005ECC9F7903D8F527F48C3F5E7FBEF2065C
-:10E93000C81B7B7CA8F32E18E74B49F6203DBF226D
-:10E94000E17E2AB1FBF4B5E7C82F6DCB67FB0BF76F
-:10E95000E7B37D0C513E97CFE4D9EBBCAC96EFCE3C
-:10E96000C4BC9F4D06CCFBA1DFB16B82F6FFD5F98D
-:10E9700059C57F3178406E8838CCD67CB6CF0A79BD
-:10E980005B30BF84FB0C2C6FCBE74D863C2F38EF00
-:10E9900003F7669043C4CEF2C0D8FD7D621DB6E693
-:10E9A000F3736770A17E69204FAC61FFD14F418E38
-:10E9B0005C97EF7C1AF99FE72F35C4BC8EE7265E83
-:10E9C000CDB7E27B74BE083F9507EB24C473481CA7
-:10E9D000AE3DBF2C34FF3D12FC2717791FCA4F09EB
-:10E9E000E44F05E54DBD0AF310708B7904C6393745
-:10E9F0005D8B785220DE756726F049B78ED97BE2B1
-:10EA0000BEDA62599A574BEB6F71BC88FE9FF2F5E4
-:10EA10005C9DEAD80FF358D6CCE26EA2BD4F6AFBDC
-:10EA2000CDC7B06EFB4D28EFD4DF17EFABE16DD84B
-:10EA3000BD1FF142E19D0B7006C1FB617E507CF071
-:10EA4000E4AE0F1F02945F2A9C179BCF6C18C0EE98
-:10EA5000450C8D4BD3850DB2A70CE2FDE1CAFBC678
-:10EA60000CF0F711E8F73AB81FD2C1FD904E1DFF28
-:10EA7000FB352ABFB4C3CBCEF57424E9F1DC0EE13B
-:10EA80007F6F41E8E1D507D8399FD52904DB617E46
-:10EA9000C00F926F2FEA85FE7BA324AAEF285D7C2E
-:10EAA00063719202A06BE72AD413F265261BD0F59E
-:10EAB000F6BF5DCDFD2BA677CAB89E298371008E67
-:10EAC000FC81A87F4AF97747199BD1BE1D4D5C3C5C
-:10EAD000DEC2E31277ED55F865FF17386EB02750A8
-:10EAE00068000000000000001F8B0800000000000C
-:10EAF000000BFB51CFC0F0038AAF9B3330E4593198
-:10EB000030CCB1666060B56160683047C8BD114700
-:10EB1000B0A9897FCB53A67F932403C31620DE06BA
-:10EB2000C43B2449D7CFAD8D6037AB3230F000F90C
-:10EB300021409A558381E1B51603032F903F03C806
-:10EB4000DF03C42780580528F612480BAB31307C10
-:10EB500001D27C40796D20FB8A1A76F3F9B5F1DB9E
-:10EB60007F5C0395FF138DFF401DBFFE2C4D02E11E
-:10EB70004B401E1BE6B3273F3E8228D03B10F830A7
-:10EB80005ABA7E6CC2C0F0CB9481C10E9AF60F20A7
-:10EB9000C90700C59E9840E34D8F81E1961903C3D4
-:10EBA0005E1CF9E20450FE36503EC61CBFFD0ACC86
-:10EBB000A87C615E4C35DF9810ECC942A872C7840E
-:10EBC00031D5F38A323000002621667DD80300005B
-:10EBD00000000000000000001F8B08000000000083
-:10EBE000000BE57D0D7C54D599F7B973EFDC99499D
-:10EBF0006E269310C24002CE2411A2243040C09849
-:10EC00004CE0E68B041270F87829565A27E8226DFA
-:10EC10004111DDAEEF2E2DC347435454D8A26BAD46
-:10EC2000BFDD812AEDEE6BFB0B162D9B049D8480CE
-:10EC300068F88868B5AE6D376AD7061B6C88C1D294
-:10EC4000DF4BCB7B9EE79C93997B33930475B7FB9B
-:10EC5000BEAFFCFCDDDC7BCF3D1FCF799EE7FC9F88
-:10EC60008F73C66AB111D775845C85FF1610327F29
-:10EC70002221646EF42A9E57D8492879262169F604
-:10EC8000435D33320859A8C9BE1A0F2113EC0D9DFC
-:10EC9000A488903262F3D8BC84B44B3FEB9A41EF26
-:10ECA0004FA4587D3602FFDD4BC83C4236DBE99F5E
-:10ECB000B4FC894BF44ABF3FF1474B98488454CB8E
-:10ECC000F54482EFED122FAF6B4B3209A922ECBF56
-:10ECD000F99748152D46AADC77D593198454BA685C
-:10ECE000293B7B7795952784962F25AC7EDD6E7C1E
-:10ECF0005F4A765F949D70D72F070A697D5754E36A
-:10ED00007B77CD6F8913CAC53C8771C01F940653AA
-:10ED1000494AC687C9F4EF9BC84D57657A55C61155
-:10ED20007273942EE62B212142C613D2C2BF5748DC
-:10ED30006006DC13F23CB69F2EE858DB43DC74DC43
-:10ED400019C5C457430738A1566F07BA9456A91E70
-:10ED50001BBD6FAF9E37B14723E4BB179AB3480181
-:10ED6000FD3CBC01E998C1E9D87EE1C577EFA6DF9B
-:10ED7000FB6B89CF46EF5BADBE898182E1FDF1D7A8
-:10ED8000A63B08AD676FA02319EB21E4CF57337979
-:10ED90003DB984B40572528371BE13D7C7B6BA08A1
-:10EDA000B145EFF7E8A4B6591B5EEE4598CCB950D3
-:10EDB000FD1AEC6729A7E57725B2BA19DB5D8DF35B
-:10EDC000D4CAFBDFA97724F714C0FB48B2858E2391
-:10EDD00074D1429EA555B4F55524417FB7EB9608F2
-:10EDE0003C6FEB53C3400FE26ECE5A5638BCFFADBA
-:10EDF00017D7CEC671053718DAFDFB3E3A5E0DC651
-:10EE0000F77CF2425ACF409FC525D379DDCB9FB71F
-:10EE1000069B935DF05D6F3ACEE7635BE9DFD3124B
-:10EE2000D3E3B1F95FCF096A50CE6EA447DFC0C902
-:10EE30005C3A6F6DFB141F8C6B347AFE3D6F47DCC0
-:10EE4000A7FB22952E5AAFBFDF27811CA5F71132F1
-:10EE5000CE0B72D176CC09F35B4F502EFC810AC7E2
-:10EE6000F56C1C3ED903EF4FC9C01F7E5704C73154
-:10EE7000D41FE8DF34E8A71BAF4FF2F69E8079C4B9
-:10EE8000F16D774CA5FD1D2856B09E03FAF672056C
-:10EE9000EBBB1291811F37307ECAF004B75981FE57
-:10EEA00077125FC803F5121CF73FF2F13FCDEB1369
-:10EEB000EDB4F5A5972BD0BFD5C40762522D6F696D
-:10EEC00087EFFDEB59FFA73CB04902FA5DB7A507F4
-:10EED000AF61DECF3DF03D2D90BDA95F02BA4DBEC2
-:10EEE0003F82D77DDB7ED90EFD4BDD491CA00BF6A2
-:10EEF0005659D2E0BBBD0B2739E0BD3340059FEA30
-:10EF000003BFCF756F271DCFBE2A05FBB9AF8FD2C8
-:10EF10009F9673865C3E906B67C8C3AF3E1F946F2D
-:10EF2000E5E338CADB7D998FC719D279B94D055011
-:10EF3000CE190AE135CCC7493C1B91EF360BBEB365
-:10EF4000066F8479CB18246E42E5F9E8A78B274237
-:10EF5000BBA27E73F9834FB5CC817E8F1F24EF59FE
-:10EF600067C035D200ED4D837138E1BEBB41423DF3
-:10EF7000154639F2F75908C98FEAA90CB2ECD55BEE
-:10EF8000F0AE1AE548E881D23ED522A5C6CA591589
-:10EF9000CAC13E2E07557D11E4132A67C72C944E33
-:10EFA000A10B54CE287FB5062C38DFCFF4ABA88751
-:10EFB000497E246B59CA70396ABBB86E36F45BC897
-:10EFC000D370FDF1FF867CEDA3E308C6D16BA23DB3
-:10EFD000216FE6F7A3CA9B2B84F2D646E52D04F4F5
-:10EFE0000C581C79207F4D1694137755733B9397DB
-:10EFF0000D286F1977B2FE4C58134639184DEEF6AE
-:10F00000795CE50AD4BF9AC9695BDFFBDB6C301F12
-:10F010006B08D71357DAE1DEFF00936BB39C99E5D9
-:10F0200030D5DF8DF2E9DDD94FE0EAD9518F7C4D43
-:10F030005B71A0FC2590C33690C3A2FF7FE4B012A1
-:10F04000D6712A7769DAAC4E171DF7A27EC2F0900E
-:10F05000B6B713D6F1EA6C1B5BC727BF7DDB3DF467
-:10F06000FEA43519E97F723C7D5804F732CA5DBBB6
-:10F070007757F666FA7E518684EF09598FF25D2341
-:10F08000F0123CA2F253DE239179E950EE833D95D4
-:10F09000F4FB577B890F5EBD9A2D637DC7FA0893F9
-:10F0A000632E9F357CBCC7F8FB81CB240CF2B900E2
-:10F0B00020097DFEE9F9FE2976FAEAF7962B8524E8
-:10F0C00087AEC79C6F05CEA8E6F2FF6A86AC83DEEA
-:10F0D00038B625254CBC585F04F8EDD5076C61990E
-:10F0E000B6379097FB5C8400FEEB9FBA99BEEF7435
-:10F0F0007D92122B9FBD7C1E3EE2F3DBC7F144CB19
-:10F10000F4C03289E2A257F37251BE06F23E994230
-:10F1100028A9EFC9FDC3877025A4590DA40CAF47DA
-:10F120007CDFE50E7E59A2F3D31BFEC009F37DE11F
-:10F13000F02733E04ADCE310778D86CF4A040EEBEC
-:10F140006DDE01388454513E9917E59309BDCDC752
-:10F15000806E257D0C8F91DA8D0C67BA185D28FEC4
-:10F16000CA82EF5EE2FD6A3D4F719A86E50CF5B406
-:10F170005A7BD60458FDF87D898BCDEB907EE174E7
-:10F180007F529208C3896CFE4AF8F77EA5F9BB80CE
-:10F19000B7FD2765DF36FA9DFF724F1589A3870EED
-:10F1A0004869C8AF65FD467E6DBD705006BAD0FE99
-:10F1B000CAD0DFD2DE6699E971C66725621DE97D96
-:10F1C000DEA0DF45FBADBDCF239E1FE855505F2578
-:10F1D000A26B071FC74B5C9FB4F179A20C85FD3F62
-:10F1E00046FBFFD008DF570233C6F45BC8DF82CB93
-:10F1F0004906BC5ED69F6EC2FFC6FECE57587BF353
-:10F20000815E2431BDB648E9BCFECF462FB35E1106
-:10F21000F5B6021D0B86F78B00538B7ECBFFFDE905
-:10F22000DA067F30FBE504C819E93924833C56CB64
-:10F230001AEA93D22A89E1723ECE7AF89636552B95
-:10F24000E4CA23A19DB7D82F856B006FF87E807626
-:10F25000E24091CD037A688267AFD213C36F8BF916
-:10F26000F7A2DF47B7EA38DEF6B96F6741B9A3D72F
-:10F270006FCB867958E4793B7933A5FF092E772D3A
-:10F280005B6BB15CE965F2C82C98973C2667F3F993
-:10F29000583AB9DEE9E0747B99AF9B6F6D0DE2F5EA
-:10F2A000CDADEBF17A6EEB26BCBE7AF9790DE6AF07
-:10F2B0002B3F17D7AF5AA5598967579598D6859789
-:10F2C0003C14EFD0F2757D6B77CFA2E33E75D98207
-:10F2D000FAF9547EEE8878A585CFAF28F78AFB0728
-:10F2E0009540B7FA5EDA5DEFF0F2A5BDC6764B89C0
-:10F2F000D40CF8AFD4F7BA42A87DB4A468BF168B7B
-:10F30000635A2F641642BDADD2AF56CCF124EE47FE
-:10F31000A9BF1BC7B924F28EE249495CEEB4D25DA5
-:10F320003F07ED54A68F4A7DEF55E9B4BD9A82FDA3
-:10F33000F5C817838A05F8A2BEE0109F5F17CEC7F5
-:10F3400012B19E15C9B561E84FDF00F6B3AB401EA0
-:10F350000FFD7BC822235F2EF1D810CF266C7F5083
-:10F360002111902F2582F3748AD6037C719ACA31B9
-:10F370007BDECDEE69BDF0BEDD6BD37C404FB7F0D8
-:10F3800047AC37F0477DDE9C53BE22584F64C4978C
-:10F390005D972B94347A7F1AD6574F943F4B397F21
-:10F3A0009E8679073E0ECBB8FE09BC2CEA3B7A3923
-:10F3B000E79122DADEE9B035EEF7812AA33CDEE2FE
-:10F3C0004E36DC57658F33DC9FEE9BFD6600DAA37B
-:10F3D000FD073C47421B0CFD3F0AFA0BDA7349B8A4
-:10F3E000FE9FB852D5770F940B1BFB65EE47D7E510
-:10F3F0009CC757D27A4F1D96914FABDCC67E555EA7
-:10F400007AF314E8A73AAA5F806E2FE98A0EE33EEA
-:10F410007D3825BC8DF2E54B05AF27036EA0FF6953
-:10F420004B683B9584CD6F4586B19E537DEF3F3C45
-:10F4300013F0AE5D463D57F1C78E9D00AFCE16DD91
-:10F44000D709746E2512D2A9ECC20119EA5B1536F0
-:10F450007EBF728D913E1B578E33E97FA37FA9D269
-:10F46000C3FC44F37D17B1BE12F0FFD0FB0ACDE818
-:10F47000179A0FCA20A6DE32935FA8C4C3FC4225A8
-:10F48000E01712E5BC6498DEA7F7D8BEDFB4AE9BE8
-:10F49000E53BA1FC5BC87AF0A790FEE5A3E096ED02
-:10F4A000DCBF62D4B744D927C5E28A166B7332E257
-:10F4B00086594C7F91FEF4B8FE2AB31E21E43EE447
-:10F4C0002B4147E20A918C79307E5EC6ACFF385DF5
-:10F4D0009AE8745CC57520C4F18B27AEBC9BBFCF86
-:10F4E000E6F2BEB097EA4D58AF7DB20BF4C6A9CB99
-:10F4F0004403793C4BF99DB5DC7335966FEB7A9BF1
-:10F50000912F69795C064F5DF6A1FC062632F96DF4
-:10F51000F7D628694C7FC69577B31CF492D0134573
-:10F52000745E4FE5E53EBE927ED77558E8018B8E3E
-:10F53000727598E1DED37D9B915F0728BF02D98762
-:10F54000CBFD392D76DDFFAF9277B39C0FC9FF302D
-:10F5500079677AEBD4A005C7537949C17AEAAE102E
-:10F560005CC7CDF27F9ADB6F2FE96F6A3E580F0BB5
-:10F570003E40FB987C66796776486B2FC1F6CB2EB0
-:10F58000BC2FD3917F61F22EE45CC8ED35CBFB7FBD
-:10F59000919C9B9F7FD3C2717F02398DCA7F08CB1C
-:10F5A000ED4821F9E0676B91927CDBBD20EFCCEF59
-:10F5B000632E3F4E16FE587BE837745C0D9459520B
-:10F5C00029A937929E29C00F13267AF0FDDD969E59
-:10F5D0004CB8FF3DE9CF9C4EAF250A3902EBAFA4F2
-:10F5E00013F200ED92E4719135B309794C0EDA65AE
-:10F5F0005A5EEA8DFC51A27426F7130FE0C16952DE
-:10F6000030199EDB289D345A9E28E710271212419C
-:10F610007A2DE542B7D4AE45D00F5F6CEDEB117497
-:10F62000C7F5638DEBC3E9B45E1291AE4E8F8EF3D6
-:10F63000A0359CE5D3609CE1EFDF0D7EABEFA9BE6A
-:10F6400067E3D0DDF219C709EA07E96961F40C59EB
-:10F65000927CCFC6C15B8BAEBDFEB792E8B514E815
-:10F660003873381DA53E4A3FA083F2E7AB6027966A
-:10F67000BA197FC9BF5775F0D310D91EBE3E4E3F91
-:10F6800036F27E3C26EB37516443E4CA66A44F2B26
-:10F69000CCBF06F4CB20DF8CE1AF85B28AE393EBDD
-:10F6A000C8265C5F48C4027A64B4F9B02A44916108
-:10F6B0001EBBAFA2DE6DE4FDB3D1E7DAECC4F325E7
-:10F6C000D7F9FA23749EC8EFD93CB52E32F2E5166D
-:10F6D000DEFFFB78BF403DA17D04F5537AC9BF53DF
-:10F6E00037C55B27760BFA737A99CBB7DECAC62F7C
-:10F6F000CAEF92993C85AE7DDE564DC84D3C6F8277
-:10F70000DFA5BE1389E66F53388E7CCF932D7CBC6A
-:10F7100021692CF2B090F3A55C49E70DC6576DA4A2
-:10F72000E30E3EAE35BCDEDB25FD7F023F4C93028F
-:10F730007F075752D58DF2073C0EE5A613FD5BFC03
-:10F74000FD569053526B7C4F9F6FC7EF5677637C8B
-:10F750004A3C3F26E93B65F6BE11BFD38DEF291F1A
-:10F7600036C173CA2F449E0DCF3DD81FCA27C44E41
-:10F77000EF1BF7DFF165A02BFDFE51AC9F9C337CA6
-:10F780006F050591CEAED26C767D0AF88EDBA73B75
-:10F7900056EB4857956CE2F6335BCFE6F3F5CCFEBB
-:10F7A00047B60E0EB854F46B290E3D1CA1D7745702
-:10F7B0004407BFF338D21D027B6CD54AD9A0E75766
-:10F7C0009BD6972FDF695C7FD76CC832DC7FF5FE54
-:10F7D0005CC37D70CB74437D6B77CE31DCDFB9BB0E
-:10F7E000D470BF6E5FA5E1FBF54FD719DE7FFD99A1
-:10F7F0001586FB0DCFDD1637BE29D6BB072DEF6D65
-:10F8000008D071ED805731785189C62F2D0C8F1992
-:10F81000BFA3ECE751E6413982AE08339F2AA6F830
-:10F8200067CF90FC6C36ACB71D216F064005DDAB91
-:10F830006888FF437A775E66140F547AD6D5C75B23
-:10F840007F457F145EAE9CF454C2BCE98AB19CC271
-:10F85000E3B59AAF1FFD30E678ADE25988EBBBB94E
-:10F86000BFEFCA2919A09768DD1E8CD36A635B4F6E
-:10F87000471D1FD584631A1F6FAF1CC6999B785C08
-:10F88000F38BFA65E8DE58C715EDA711F78838F94C
-:10F8900012569494789F417B6C09F40FD6E7228628
-:10F8A00077ECF41F5B6719FDEB78F9C0FD2E2BE0B8
-:10F8B000E34095B19F751C47513954404F94E49BE8
-:10F8C000DE433F674039235EEAE4FCA8293C5E3E04
-:10F8D0008FCCC379E072BB4CC86D35F3731057FC05
-:10F8E00038FAE2CBB4D01C6CDF907FF05A7E6E12F7
-:10F8F0007CB7A489786C149F3C38779BAB0270BEB0
-:10F900006EF5D5D2D2953EEE6FD265C4B3D7E5B3CE
-:10F91000FBFA2AE67F5A1CEC463F60FD9DE16D70C4
-:10F920009DB43EA2603F4C747DCA134E436CC0E947
-:10F930009BC5E99525E8CAE928F4F8A40DC679AC79
-:10F940002F32D26B29A7A799CE4B391D979AE87809
-:10F9500014FEA074999B808E4B381EB5CFE5F6DD62
-:10F96000607A5CBBF129EE1F13FCA398D635A13F4A
-:10F9700086D637CEBF8F811E079CE7E23885AF7BE6
-:10F9800089E4A83CAF614F39F8C933AC86F8C54269
-:10F990003ED6923C16EF28C99011F797B8DF88EB56
-:10F9A00067067A57CF8BF2E7D15E667F34BACFC94C
-:10F9B000304F75790CE7EFE4F411FEBF56EE1735C2
-:10F9C000F7EBC4945036E0A3939742D99B8BC0FFCA
-:10F9D00023219FB4CDBA379BE50BB07EFA797BAF7C
-:10F9E0005C0CA1FD76B277E4F8A2C0F966BE29F1FD
-:10F9F0008531CE5802FE62DA5E6D3F5D83E8D01736
-:10FA000046FE59F61402AE8E28D09F7AF75A05FDAD
-:10FA100065EE0605FCCBB5EEFD95400F3F09EF7096
-:10FA2000825FCD23F92240C70226BFEBE9BF58F918
-:10FA300015FDADE90B2A20EF351EA35DE3E7FC566B
-:10FA4000ED363DCFAB417EF39BF86DBBE0B3EBC928
-:10FA5000F5B17CE6E7F3A25ECCE1F21A9FCF44FC5D
-:10FA6000E2DFB99FF5573C4EF72E8FEBBDB3D58340
-:10FA7000D757B6E6E3F3E35B7D78FFF6D662BCFFCB
-:10FA800039F879E9FD1BDC8FFBFAD600DE9FDDBA81
-:10FA90001AEFBBB89F56F0F12E1E4FA996DBD0BFD0
-:10FAA00058E70BDA5D31FC54C7FB8DAC0F38A4204E
-:10FAB000BEFFD536E58802FC756E484E08EA8BE538
-:10FAC000F5DE030F51BAD8BE4D82802B6D1DFFAA03
-:10FAD0004CA5FC5F57EBB5AE83F642CDCA1CE0C720
-:10FAE000C8BF2AB9F0BC7E96F58E38ED8B7612B57C
-:10FAF0006FD66F2B6A8D76B05FF8D1FB832118E744
-:10FB000084FE6004FAE777AB9E787EE1F689EBDC51
-:10FB1000C04F8D17836EE0A7C689276466AF337F19
-:10FB2000B8CAF95494F7BB8DF17C95F7BB8D3E872D
-:10FB3000FEB6F58F4D0E44B952A559766989C7674F
-:10FB4000F637ED94E2DBAD4956866B9D3CBE4A75B7
-:10FB5000A60272062C0AFD9F40D906E44BD398DF1B
-:10FB600022D917E47AD9B88EA7150702A097B40C4A
-:10FB7000E2AB01F5A6F5B8816FE4E285E7619D256A
-:10FB800005317A1BEC1EB3FD1F7B2FE3D2154A49CA
-:10FB900087ABB91CA3AFC659A86916EBDFA3DCCFAE
-:10FBA00021E8AB71FA96784EFE02F4EAA33EE68FA6
-:10FBB000793483C565078AD7222E2BE176818DECB7
-:10FBC000C1F249A419AF3B38BD078ACF11907B59C8
-:10FBD000A1B83903FA630F87E8F74E937E573423B1
-:10FBE000BD254A933580AF7B1583BD2115333D6F0D
-:10FBF000077B1DEC188E5FA2765E905C05E28F118C
-:10FC00004FEDB41AED3171ED552CC80F2EAB299F75
-:10FC1000EEFF7AFA9DF842E927ECC4219C77EC6B61
-:10FC200004E231229F50947FC5E46F52B3591CC641
-:10FC30005CEF2D5646F705568E8F059EF09BDB71C7
-:10FC400084809E2AB5A71CD2F07A12B5477A678FB6
-:10FC5000E2B7DE86ED9F555CCC9EE0F940D42C9750
-:10FC60000CF6895D77837D38EC7BB7C520A7C3FB95
-:10FC7000CDE8F345F777093548E1BA54E8E1628603
-:10FC8000279779289EA47F2ED3189F9E2997C2DBA1
-:10FC9000914F7583BD555B5C731EF512B547D479E2
-:10FCA0001CA7D3FE3741BDB49ED7278AEF86F489BF
-:10FCB000E5EACCE1F504AA18EE21A17F5914EB3F47
-:10FCC000085076C99F0DF5B2EF69D1F6ABF1FAC1D4
-:10FCD000F556A0F8DEA59A13EE75E949C07B05310B
-:10FCE000F800E89A6733D2D9A4FFAA86E93DA3BEFB
-:10FCF0005D48F9F7086DA756DE540F2EEF9ABD6BDD
-:10FD00000FBF8ADD117688276EBDA7E08F9B01FDAE
-:10FD100019F10AF1B13C8ECA90A71EE99E2191B05B
-:10FD200017FA6FECC7C26C931D96611EC71E9CC765
-:10FD30000E85AE2374BE3AE83CEE41FB38BE3D254D
-:10FD4000ECBC05DE41B4A784BD47B8BDE7A2FF62A5
-:10FD5000F158192F5F7EBF4701FC5B6E37F9998719
-:10FD6000F28F09DA530B88B1BF65DCEE2B33D97DF6
-:10FD700042DE5F14FA52D8B55C1FDE22ECA9B291C4
-:10FD8000E3CB9DA67CBA2ADAF1E66B900302BD8232
-:10FD9000781319A29381BFDABD539B2394AEB7F8B1
-:10FDA0001C2CDE42FBA9087D8E7462387B292F7FD4
-:10FDB0008B4745FEF76B2C7E513F8ADFC25FCCE25A
-:10FDC0000667ED125B0F42E44D12931F5EE961FA84
-:10FDD0005A33F145B627500571204D917C61329C14
-:10FDE0005FABB83D07DF6FA1A4A8CAA336F9EC78D2
-:10FDF000F9E5DDE05A2565B40F4F7913CFAFEEEB8F
-:10FE0000AF84E919EBFC1213CE3EDBFF3EE6750D25
-:10FE1000144818F769F77E8AF68188EF44E977027B
-:10FE2000F351FCC59FA0BD3294B7C5EB5B2AEA2B0A
-:10FE30003E86F19AEFB88E25433CE60CC471E9F793
-:10FE400067947E0DEC9045025F518A46043DBDD11A
-:10FE50007C9308B7ABCEDADF4806BDF912C7F54789
-:10FE6000FD726D3C3FE70299F999C5F54695AD3BAA
-:10FE7000F35486E7C4BD98DF217E924F15313BFCD9
-:10FE80006F0DF36EAE1FCAAF46FF60A460247BB453
-:10FE9000DE44E7292A5FF738DE180DD78A719AE920
-:10FEA000601EA7F93BA7CAFC65775AF5E9EADC684A
-:10FEB0003B62BD33975F96202FA7BCD8E89F5C704C
-:10FEC000D9989773A73558A2527A562AD2CE540F92
-:10FED000EA3594A78E2B1AE29881FE8E9D30ADC72D
-:10FEE00007997FB48CC8611B5B17EA216E27E44633
-:10FEF000F0BFB91FA3B55F36D883F678F9E5FE2ABF
-:10FF0000E0BF5BFCEDA8579750BD3A2E8E5E5D2892
-:10FF1000F7ED1C07F2EB63FB3BCEFEB2BB0AEF35FD
-:10FF200009F361F5B25C651CF0812BBEBF6A3EE748
-:10FF300093E1F13CA1575D0AE006B3BF6D3E97BB6C
-:10FF4000F9267E08AA4338E8A6ABB9A3CF53227E90
-:10FF500018E81FB82F9E1F555C13E55DDD4D4CF46E
-:10FF60006D33FA9FCDF5087F1091DBB2419E85FD80
-:10FF70006B2ED7A4B2B8C7F1C2BB486C5E95D00750
-:10FF80006A71B3067EF1AEE291D70B733E5C39F431
-:10FF90003786AE9576633CF609457F10F8318A9333
-:10FFA0001A98BD5ADC80F6EAD202BE2FA8F02EB411
-:10FFB0004F855DDD78F321CCE712F95AC23E35F763
-:10FFC000BB6BE2F398CF335ABF851D7FCA26B33887
-:10FFD00004B5DB3D68B753DC17E7BB576C8C5E3F5D
-:10FFE00055F4FD20AF3BADBABB01E28C8536DFB3E3
-:10FFF00071E6A1D7C6E4BB2B41BCF55710F8988B2E
-:020000021000EC
-:10000000E3403A98D71B61C78A7D4A13DC4C6EEBFC
-:10001000B81D5B5AD080F298E6A6762BD0CDC7ECFF
-:1000200056D267B453976ADD5930FFE6F54E1EE4A9
-:1000300076ED18EDD65D0EC6474117B1BBE97B875B
-:1000400042A1295DFF1E972B8E013D76A511B407B5
-:10005000CEA4A9E10371FC0D6F737EAB963718F83F
-:10006000AD8CE312B5AA47037FC09941E6C74B3474
-:100070006F0F99707A4E3E29B739E1DA5F0EF4A01E
-:10008000F7BA0DAFFD989FFD70E1BA9C78F51D6839
-:1000900052E2AE4BBFE3F3B65CE46BD7327FE4DDF4
-:1000A000052AFA8527D4BE7702F9B49EF3E9121B1C
-:1000B0008EBBAB50C179E9BAD9DB0C71CDAE423BF6
-:1000C000E6A3B417FEEC9790AF5D562C19F24B04E3
-:1000D000FF9601AE86FAEDCCDF79B79BE9E12E8D74
-:1000E000E3179E37B291CFE999C31F3863F34656A1
-:1000F00008BEAFE77E72137EA26A246E1C47E4211D
-:100100007F5CCFFCC2778BF11E39B413E4AE8EF363
-:100110004DFBA5756E94CF232C3FAFB1B001FD45CB
-:10012000ED13DF52E17EA3FB4315EECDB842CCEBDD
-:10013000DDC53F65F9917C5E37823F9EF2FB4B99AE
-:10014000D3AD1E7ABF3C72B315FC9DC23F3B2C0E53
-:10015000C5E329356CF8A4C6CDF0F589CC6492943A
-:1001600001F492C312D02DE22049907FE6B6861D9D
-:10017000F4BE4EE99902B825D984173F7EE1503686
-:10018000C8F7F119BF55A0DDEB8ADF6B84714C2AEB
-:100190003E84FEFEAC23873AD3693D4BF3894FF78B
-:1001A0000CEF4F355F9FEECE60F94277FBC221D84E
-:1001B0007776E10ADB4F51F1C21B95B0AC0D8FCBC6
-:1001C000E804708888EB286E1E17E1F10972E5AA31
-:1001D000143B6F754AD00EFAB7B1F80D27F4773992
-:1001E000A75BCE61B901F8BBEA85395F013E2137D3
-:1001F000DB5CD7D3062FB87EEE9CAAB1F777B17A35
-:10020000E70769F9BA8243D9EB0A87EB9721F92905
-:10021000F8C3D620EDCF99453FCB06DCF606D5BB1B
-:100220001E6897EB2DB3BD645E57CD7931E67167DB
-:100230002ACB6A6D7361BEBFEFF6C6F019D5036BAA
-:10024000A1FF1B9FB4631E57DA91D75519F41BC544
-:10025000EF3552948F36723EAAD398FE6B2C24E170
-:10026000ED12F0DF87F5A52077AFB27CC30947DE3A
-:1002700063F9A3A6F5A18BAF1BC2EFDC35F17D942A
-:100280009F8F0F73790959A4587F9256DCBF12E6ED
-:10029000C52C27E27E7E7F4FDCF5E15D1BF79B0CD2
-:1002A000B2F71AD5DF10D736BFF7737BAA0CAE3181
-:1002B000F5DC6763B8575CAF210FE1896F53F96FC5
-:1002C000DFDDE1BE03F59486B87DE39143F910B319
-:1002D000C93C7CA88AEB0BB4CB643ECE09C4837ABC
-:1002E0006AA96667F103139F5B8BF747003E8B7526
-:1002F0001A0C722533AA47E4583F441C3B8C84F403
-:1003000037F362F2BEE8FA4E40AF54BA99FFD5CC4B
-:100310002769C554EFE024502E8C89FB9AF9B64E1C
-:100320000BBA219E4DE5E73C8B7FD2F50AFC137298
-:10033000BD0FE793F3A785FE83F52FD967E44F6BD5
-:10034000BE6AC02BE67EFCA3CD88FFC5FA9CE6EE14
-:10035000C1FE2DD59AB3A1FD09EE1EB4B7A87ECF7C
-:1003600086ABE033A1AF87F8AFF0A6C5A0DF81AFC1
-:1003700021447EA6784E12E8C13A37C329C4E44F1F
-:10038000EF728F6C6F749AD6BF332E665FD515935C
-:1003900024572AC83BF33B753D92BE3F39C62FF721
-:1003A0004FD6608B2DC6BFEE2CF8D2629713F40C9B
-:1003B000CBDF2AA1EACB9A1BF5670ABFA988F70908
-:1003C0003FE9307F66413BE6775945DE058FFF0DFB
-:1003D000CBFB4910771457E1CFB46D6F567C3C5E70
-:1003E0008278AC9EFBE106678FE20F65FE078ACF3D
-:1003F0007E6E1B3F3A3E3BC8EDCC5E501EF4BADE2B
-:10040000E6C2AB06F928B4AB5D8EF8B8ED656EB701
-:100410005D8B7C9E94E13BD6CE4726FE12CFA3781F
-:1004200098C9C184E2439DB178B8AC89D286CE9395
-:10043000DA44A690D4C47CB77448EFFDD4C05F43BF
-:10044000F878145C2CF8EB92ACFF19E898A85C1DC6
-:10045000EF47A2F78D85B6D5906F45CB9109A9ECF2
-:100460003A8D5E3B671CCAB6D0E7AF01FE8AE9470A
-:10047000D7F78EE0387EA5B27D365D97D6E5003E93
-:1004800038ABE8A9F6F163E71FB33CD9E7EA9E6D04
-:1004900054FE8E66DB717D3EEA6638E4752819C32A
-:1004A0004F9BD5E075F6B9A8EA7592CE959CE0739E
-:1004B000509A5563DB27767B72CFFD81185CB91BA0
-:1004C0005E4D84381FE39B07D51ECCC7B99DD66E01
-:1004D000A3ED1CD3E4CCB5F47EB69DF1E3B1903529
-:1004E0006EFEF36C3BC3CF9BD5C06CE82769DE84FE
-:1004F00072D620C901907FE21B9B7F6E474BFCBCEC
-:10050000D2CA68FDF3B1FEC3B47EC00D3EEE7F27B4
-:10051000AECCB8FE763EEE0821B5202F8FA619EDA1
-:100520004DBF9DAD7BF3A3F52F8EAD1FF3B3E6E278
-:10053000F32538CFCFB1E7F9762617E5B92CAF4DC3
-:10054000D051D4BB325ADF4AACEF08FB2ECFCEE3FA
-:1005500006BCDF02E79BF39F163AD87C44E3A6046F
-:10056000F56689C6FCF513FAC3C7E0BE9CF07D9919
-:10057000D2DBB87FEFA8D58BF900ED8E694F6FCA3B
-:10058000803C0923AEB7719E51EC3F946371BACEA3
-:10059000714C49760EE2E10E923BA29D237087904A
-:1005A000EB05C27F7AE500EE176BE1DF8B76CB4D72
-:1005B000B82EBA5FB11BF72B4EE8EDC6FD89152E9C
-:1005C0007E5E44DA37D1BEDEE5B897E1F9C99FE235
-:1005D0007EE505D907E5787E4245F45F7903DB3F88
-:1005E000EA62EBD402815F4D76C64B995D32E0C87A
-:1005F00044B8FE84147C26C2FC9A067CEF8F7C6D86
-:10060000C3214A57BD97B81CF4BE24C2E24C151C46
-:10061000D75728E12C581F6AB2993FAAE54FDD59F8
-:10062000B03E1CFF3413D78BEB94FD38DE498A179C
-:10063000F1FC4213FEAFB01FDA0679138B14898CDC
-:1006400023C3FB05FBD5C08E2871B3BCA0126AC5BD
-:10065000819DF1326D1FFC65157FA2F3678987EFDD
-:100660008D38A5562927AC1CC7FBD9CCBF341A9EA0
-:10067000AE30D903625E2B943D556097B4809D41A6
-:100680001FB5283B9474DAAF5D8304229BC4CFBFAF
-:10069000CBC9B630FB60B2650DD08D58997DB0CB1B
-:1006A000F5D776B40FE87BB00F2AB87D5061F7A27A
-:1006B0007D301A8ECFB1333BA1FDE254B49F228E20
-:1006C0001F66817E16F9E402DF0BFECB54CA4F8011
-:1006D0003C2FE07C28F0BE4DE0FD2B9B089C275072
-:1006E000A118F1BE8DF35905C7FB2D10F7027E3D11
-:1006F0009F79CA0BF11881F7AFB898BF9BE37DB122
-:10070000CFB203E43306EF779C1FC0BC8597B39943
-:10071000DE17787FC89EFC8C78BF4CE80F8EE76BA5
-:10072000386E10EFFBB9DE33E37CF3FB6BC5F98465
-:10073000E3F8283E36F26FFBEE1C8CAF94B8EC6801
-:10074000072CE80D0EDE4BAF995736FD662FCA51C8
-:10075000B20F3EB3713B6CD43C5013EEA776C34E40
-:10076000D87F539EC7F28ED2B25D55B09FBDC223D3
-:10077000A1FF69985C98ED806C17DA69954A83C887
-:100780008F1B11EF57682EC4DB8A523326BC6F963D
-:10079000AFDA3CDB887C9DED30E617940BBDA9DC1D
-:1007A0001B42BDA9DC1B01392AB7737F8FE36FDCC5
-:1007B000B1E73AECE2EB81D0D3425E3B1CD39460CC
-:1007C0000CFE1AE26B25578BDD5FDCC1F9F2078A5C
-:1007D00007FDAD1D76661F98F1D850798EF72B383E
-:1007E000DEAFB033BCDF311CEF173B62F09BD3CEE2
-:1007F000F0FE58F30A841D5B63B263DFB71BEDD8CC
-:10080000447CFD215FD7A3F4F4325CAB7811D70AA6
-:100810007A2A1CD7DA004FCEC4751571AD90E3610A
-:1008200074B5E61A706D39C7791DCA9871EDADB10E
-:1008300074315F2B46C1B5BB1C14D76A580E716D5D
-:1008400085C0B5495E03AE251AC3631DDFCBC771F2
-:1008500074A4313C6BC66389F107D76F265C21BE57
-:100860006F4921D9E89F1BC225D3E2E2924438C4E4
-:100870003CAE16C025DA5F029778709C663E3F9AC0
-:10088000A2A39D1FC529BFFDC6212A87BB2E123CEE
-:100890005141E0157FE48FC71A8A102F1087273A3D
-:1008A0004E8157043E11EB638BC2F249057E49E449
-:1008B0001F15D76BC52F2732FF17E21E336E117835
-:1008C000C55C7F8795E199963FBDF59F8A6316EEDB
-:1008D000A7DC47E5A45CD9867AC9AC075BC05B4D51
-:1008E000CBBFEC22E110D4FFA773727A1C7D6CC6DB
-:1008F00033669C32567CB328EF22E61B8E863B3A49
-:100900009430EE936F51EEB3833E32E31A333D736E
-:10091000B24903C40304DE49C4C750EE2E6714076E
-:10092000252A47F538E2A384F5D82F5E2B2E3AEF1F
-:10093000181117313D50E1667A20115ED9E57369CF
-:10094000B179AC627D69CFCEF925EE37EF55F1DC98
-:1009500084F6F353519F26C24B6D26B9EB003DA29E
-:1009600045D7AF8474E91D407917B86A347D21EE0C
-:1009700013E129B1AE9401E81F9F386E392589D95A
-:100980007D0FE6303BDAFC3E9A8762C45524A31003
-:10099000F9F81EBE1F3311CEA22B9893F9AF42D89F
-:1009A000CE2A6E87A2CF701ECF43A05D0DE4913C8E
-:1009B00058270276263767E64A2837CBE0399DD795
-:1009C000F22A16373A5728613CFD4CB90DE7F5D4A9
-:1009D000C72C4FB13D85F95FCFCC72F80ED02E7C7D
-:1009E0000CF5D275F99CA3BB0870C0AC24EE2F485F
-:1009F00067E35C921CD98071F339D32D21EF7079B4
-:100A00007F3089F7235DC3F85B1DC7A3103FCC9AE5
-:100A10003D7C9FC1D3495EAC1FF2E7B368B99D9698
-:100A2000EE8773E8238785C55BCD74FD98D31D08D9
-:100A3000638BA1437D9E5D7750FE77DCC8E256470D
-:100A4000AB6C98A7E380103BADF7A1FC9C9478FCBD
-:100A500021C6657EBE9F8FFBDCE47E5CDFCEF2BCF0
-:100A6000DF8D8A14027AA3A22E82631527ED7F8878
-:100A700016FD4A521AF6EBEC0BAF23DF9E4EE374E1
-:100A8000D025B4D7CE78983C855C5A18F66BD2EF57
-:100A9000ADAB46C807E92EAFC9677134422488AFB1
-:100AA000C11F39C3E9BDA256C671AF70EDBE17E4D0
-:100AB000F15CED1BC9702EE5D2410B01B95BE12A57
-:100AC000B90B9EB7A7303E063A038E5A51F5A56F73
-:100AD000C0F3FA7AE37C9C4CCAC171942A6C3E60E4
-:100AE000FEB2660F6F97AE7E41353386FEFE9FFDE8
-:100AF0008D14B3AE887C167B82FCBE44E39662F50F
-:100B0000AE1CF5474E28DEBF07F6CD048AD879180B
-:100B1000751E1282F86F9D8F44BC9CBF30CFA633E8
-:100B20008FED17E2F29556BCBF2907FC97830A8B1D
-:100B30004B9BD691523A57D9E9E04F67F37366AEB3
-:100B40008C765E6931C3F9A51CE7D7E90D18EFABC8
-:100B50007FA473770EBC97B3ABCB3D3C6E1A433F7B
-:100B60007284F9E79699F83CC5E4FF2FF599F206EF
-:100B700079BEDFD1FC675CC03F0FA673FE992DA143
-:100B80001CBD2E791E01B910745A9224E233C4633D
-:100B90008DE18F217EE0F36BA67B227A9AE964E6F1
-:100BA0000B33BDCFA498E89580FE89E85D5A5CFEC2
-:100BB00017A5EF05ABCD0A7CDB6EFD6D36B78F88D0
-:100BC0001CA34FCC74BBA07952404F9C1B3C87B8F0
-:100BD000EDF464CF57F07C2C2AC778BE279787E8BE
-:100BE0003C507970C6CAF3DB53409E299F59A19EA1
-:100BF0007A5DD21D207F8777DD8BE306397546E568
-:100C0000C84CFF61F247FF57447F7387CB91399FF0
-:100C1000ECB3CADFB7409F53BA2D4CF2E055E8D38E
-:100C20007AE2FA4AECFE5611676FF73606605F7A91
-:100C30005DAF05CF016A197C5E590BFB5D6B255CCE
-:100C4000D634D28DFDD59A58BEC4D4A71E2090CFDD
-:100C5000FEC864E2037DA535B1FC09FA1EF3270442
-:100C60007E17E73AD2F73ACB17319EBF94E233E6CC
-:100C7000FF2CEFAB403BA2939F8724EC0491F74AF3
-:100C80004CFB5E1AE1C9C4E8FE90A64B616647249E
-:100C9000D80723AE667BC17C3DDEF1CFDF003F622B
-:100CA000599E8A7EC4B2C1881DEA7BB8A0A316F300
-:100CB000DC6A2517C4E38E7FDABC03CE415A5EF0AE
-:100CC0007E5C5CD27AE1091F8CA3D5BAC7970EFA75
-:100CD000613B5BB71CD30A26AF1D01F7046BCB6BDE
-:100CE000BD3312E799DC93CCD7F7F6AF1D7810E24D
-:100CF000DE7DAA0FEC97C53CCE5FA7EC59BD96CE22
-:100D000067E722C9B78D3EEFBC61EFA60E88639CF2
-:100D100057D1DFD775E96036D819AF7DCF8EF6E8A9
-:100D2000F14F0F3E8D79267DEA3C18EF50FFAFD78B
-:100D3000D8FB8F5F3C097A6679FEF22268C7A190E2
-:100D40003DC04FD70D36BF0BE725D4F5AA7341FF41
-:100D50002CAFDD6FFF2BA053ED4FEDD783FD31E8B6
-:100D6000A986F9BC2E2958994CF55E5681F73B1996
-:100D7000D08E8FF874A46B3701BA8AFC04610F948B
-:100D800071BE6959E44D2131743D3798930274CE98
-:100D9000A9E5790C8BE400D8CBE75CD7A7A07FB29C
-:100DA00096E52F98E9B51C707A2AF4CF3B795D9CC3
-:100DB000F53BA7F60F5B83E00FBE81D9E7E6F77737
-:100DC000707A3B7EB7EE008CD7F17DBB0BE0B5238C
-:100DD000417EE6D464AEE7DD63F397083C43E96AFD
-:100DE000B7C6F80129DE5F9F1C1377BDD6F6BF9A00
-:100DF000CCF4C02539B819E85FCAFD2565DC5F92DF
-:100E0000A85F25A3F831281F219D96831F6326BB69
-:100E10004EA3D7CEC5DEC9063F06D1DDA067CF41C0
-:100E20007C0EF098B26C3BF4A3EB02F36724E2DF94
-:100E3000E579076FEB88D1775D563D1BECDCCE1B67
-:100E4000DECE82F9FFCFE2DF213EABFD69139CAB22
-:100E5000F550C1F2F1A0FF62F8F869988F6BE56375
-:100E600033FD5A16E5A6102DCACF828F87F3A584CD
-:100E7000F6A8E0EF44F301E5C01E157C9EA8DCB99E
-:100E800045D3E2F27FB49E8B23CAC16ACE57770066
-:100E90005F8D07BDACBB400F2FCC7A17EDD657B88E
-:100EA0003E1EE29394EEDBEEA17A27F4AC1DE3E85C
-:100EB000472FA978FEFAD167D6FF00D68DCEC10A9A
-:100EC000D787B88E97BB56D07EDD00F64301CE4F54
-:100ED000A712E337BC902CE2E6C67CDF9FB87E9376
-:100EE0005ECED659AD9CD27B265F276EF43E93042E
-:100EF000EBF94CBE9F62469B1A775DE61082146444
-:100F0000BC6E01E85F70D8584E1BDA9FDE6C81F82A
-:100F1000E08DCF99DEF37DD5E6FCC87F4F36ED7FBF
-:100F200032ADB7F64B23E769FC0BB77B9FE3F9BF04
-:100F30003FE1E70936F3F3049F877DAEF47A18F6B4
-:100F4000B9D2E72FC23E577A7F84EF7325D9633B2E
-:100F5000375E9CF7A4723A344D0C1BF6698AFDDFAC
-:100F60002D709E12E001B7CACEA17351B405792A43
-:100F70001C2F5A92FD7615F6737D44304FE5AFCFA6
-:100F800077233FECE6EBAC19C788F31ECDFD52A3E7
-:100F90007454C04F7574727075A0804F18F0CDDC1A
-:100FA00009FB1F8AC1D3A91AB32B1BB9DD16BA449A
-:100FB000C2CF4AD1F2A72F91830F313F5B4806DCA5
-:100FC000017F51165EDC4B10C72D2EDA85F617E037
-:100FD00040C06578FE580EF8BD5E443CB77870DEC0
-:100FE0005D0CB7E8C370DC10DD64A413C3E745AF44
-:100FF000A35F71716F7C7E8BE637ADEECC8BD9979A
-:10100000503F18ACE7F8C8157B6E826AE22B733D3F
-:101010006945CC7FBF249FFB7B783C44CCE78E4D59
-:10102000DDE82FEF2AB279C0BF60C689669CAF1693
-:10103000B17D64CACD6C3FEBE24B2C5E880C9319FA
-:101040003D9F4DE579BE2DAEA00FFC98753E13EE89
-:10105000E5E74B95E51BF1BC19EFABBDAA09EF879E
-:10106000D87AB89DCDE7998F09DA51CFEE63FE812A
-:1010700056B787F11F09A3DDB3C06D99F59007E25C
-:10108000566C7F66C920417F4949AF07FD4F0BFA77
-:101090004864EA0C3C87B809CF1932D16F01B87A9D
-:1010A000D3A11E4FE7784AFF050AD909E7CB64DAD6
-:1010B0001B749003D5BD09F7E3407EC338C647F6DD
-:1010C00058FAAA49A77680082CE07E35F1BB1513A3
-:1010D000EC87900F62E66FC4F898CAF94EC4BBCA99
-:1010E00079FDE57D2CDFCDCC0769F68BEFC239CFDA
-:1010F00015831A9E036D9EF7E171B0FE0F1E8338B3
-:10110000CFA524DF7698673B9B67318FAADC26C387
-:10111000FE0EA2B0F912F130B37FB5D4B46FCEDCBD
-:101120002F715EC256CDB48F8CE3F80ADEBB26C7A2
-:1011300021C3B9B5155CCF0CADDBF65C1ED762E7F9
-:101140009CB6F6CD1E31AED5EA62E7FE11D7F2515C
-:10115000F4DE76B68EF0F3054A8B4912E09CD23E5F
-:10116000C2F8EB114B38D91B5B3E6CD857EEEC5BE9
-:10117000B518CF6974B9AAC0CF564A58FC52EF25AA
-:1011800018CFD4C9213918332E112F51B95F4C957E
-:10119000D8B8049DCCFDBB7DD0680F7D2564DC0FE5
-:1011A00071DB03C6FD1BB76ECA32BCAF599F6B78AB
-:1011B0005FED996EB8FF92DB787ED0FF081ACF0FF3
-:1011C0005AB1BAD2507E59C0787ED02DB5C6F383BD
-:1011D000EAF4DB4CF2AB1BF8FBA8D4FD5D18BF258D
-:1011E000F997B923F979CB468B2387D879426807D9
-:1011F000C689B398F7BB7DA409BC609483CE5039EF
-:101200003B6FA7D7B3AFDC03F12A9F82062E3F576F
-:10121000A89AB072D56E166FA9CA886FCF0B3D68B9
-:101220008E4F8873014BFBBA910FCA4CE70096B8FA
-:1012300017C63DE7F33F34D3B91809CEBF18B67EC1
-:101240008F757C3CCE34EAF878BB25A4FB98D39B01
-:10125000787C631DD7507E179C4748E9D10D8F26B7
-:10126000B2F71A95B79D69F978FE4586BD424919CE
-:101270001FF577127DCE98F2D1DAB91F9FE82BC601
-:10128000749E6986DDC3F84267F868A7A487E1FC0D
-:101290003C731C55CD177154E339188E9D442FA013
-:1012A000240A55108CEB8772ECE11D12E493B37D98
-:1012B000A68D375870FD69BCA8EF81FC94A61B145D
-:1012C000DCE7582D6B585ECD66EB931F72EF217FE4
-:1012D000E2357DB5E1FC0EF77617C889FA347B9FBD
-:1012E000683C6D13D5D5F1EC859B52181E3AAB04C2
-:1012F00066A6207FE86E168F08E37968222F3751A3
-:101300003E2E058E2EE44322F0019BBFEF403C258C
-:101310008EFC56A53039F31748612BE497AE246153
-:10132000EB0876659BDB12D79F5198C2F359AE5CF0
-:10133000C573EE5471EE5E163B77AFDD749E65218A
-:101340006FF7788A9DF181F7A021DEEDE7F2B0D842
-:10135000B38EC4E25971FE8FDAFF3EFA99CE8C72D9
-:10136000FE8E886FEDE6FB9A2B2F5902F1FA3F9023
-:10137000A2209D9ED5AC71C7F700EF6FDB141F9EB6
-:10138000B7DAF8B8859D17EF6E9C84FBBE53FE8AD2
-:10139000307F17EBFF622EA77E777807498138F5FB
-:1013A0003B4FC2EF87A8C536F0E591333734E0797B
-:1013B000B1BBFB295EF446C797C2D71BFFBE8EDACE
-:1013C0005CC0432765F4F7D4F4B27CF3A5C5FBF900
-:1013D000392D3DB88FD1FCFB2525B5411DD6E5A59E
-:1013E000F5911D887F7C9E72FC3D13E2DB86BFAFCA
-:1013F000326CBFA586B8AB6D90F17DDB8F7CEDF8CC
-:10140000FB206E811BF5FAEACCE8B96165173B76E3
-:101410004208C67C6E98F9DC216197A9265C29EC0C
-:10142000B13A123EA648C3FDCC89ECB1BD29DC1E01
-:10143000BB81DA6374FE6FB7B13C5BFF16A9188CF1
-:1014400046C7166922E8AFA7F83CBD5916C4F35B3E
-:101450001A13ECBFFBDF5CCEDE2C8BE03EA7366FB1
-:10146000D0ED1BA17C610ADB27A85E61E77EA87630
-:1014700096D73574E5F93082AFE7396D782D75323E
-:101480007B7BC1D5E7B2465A3F4BFC4102E3A1FA50
-:10149000256EBED80BD03EEC178CB0F32BD4A6F73C
-:1014A000ABE2C9B390C3CD6AE067A03F764A9BC266
-:1014B0000ED403633FD772A6FCF9F5CD554D3F918D
-:1014C00042EB7DCDFA0F1E908F1D41E3EF4E89EB6D
-:1014D0006B5AD08EF477772483BD7931297836859D
-:1014E000FBBB617F615BFFF376D4A726BA9BEBB9A8
-:1014F000CFC9E653F5B0F7E417BA67798C9FA4CE4D
-:1015000029F1F5437F07EA9F6DD5FF0DAE0F56C455
-:101510008F43662A15BF06FA556B811EB8B6F51FB4
-:1015200040FF714A92FE1EDC9729FAFBF0FD3F59FD
-:10153000F50F989EAE727D981FDDEF90689E21702A
-:10154000F1617E2CBD3E1F9D33EC814136CF7A5038
-:10155000BBC67976D2EB1A585BE8F73D65F1E3ED4F
-:101560004F717EA27286F982623F8CDF4DF478EB78
-:1015700097284FE75F7562BE7B2800FBBACE4CB25E
-:101580009003317A4E9C63D0D8CFECC281FBA50387
-:10159000CC2E2478FFA3AF790F407C77E5142EC7BB
-:1015A0007C3FC61DF71BF7498B766F4E95C6249F6F
-:1015B0000FF3728DA94C3E1F4FBD46F9CC60F50864
-:1015C000395515765DEB62F57E98CAF82C294D12D7
-:1015D000F9E9F94E26873D29D7363F4FACC8FDFCC7
-:1015E000FC21E441F519F3F51EE1F220F415ED6755
-:1015F00019CC17ED6730E9DAFA9959F205F0B1D84C
-:101600009720274B067F78C0C9F8E90EDEDFB38A42
-:10161000BECCC9E477B97364F95DE564F2BBDA69FD
-:1016200094DF5B9D4C7EBFEC64F27B9BF373C8EF51
-:1016300047203F90E7C8FDF8E49451EF505C7C17D9
-:10164000D4BF5891F83E6FF21B29C6FE58DC1B240C
-:101650003A5B2C9F89C50D14BFEAB8AFE34D637D9B
-:10166000EFF0758BEAB1CD50EF3BBCFD1DFFC6E836
-:1016700007747C3E8E5C0A3ACAB60637EC8B4DB4D2
-:10168000CE059C6C9D2BB7B17D17E4246DBFD03087
-:101690009E6D40B7A1F184A865177F3CA1B8E3E92E
-:1016A00036D617339EDD50AF18CF82ABA74694478E
-:1016B000BF904757448675DBAFC45F17CE38D9BAA1
-:1016C0003990AC3F09F432F397B886397F25DA1F99
-:1016D0007356A90843FF4A14A6078916E99163C601
-:1016E0005792DF20C61DB4C4FAD97AE3EBC9E79C50
-:1016F0004372F71CF2DF3EB69F87F2F58FA19DDBA8
-:10170000C7B956E1FEAF4F98DE7CEB4F5BAC69B4D6
-:101710009DD5197BBF03D75F3B59DE4BC3C51C2743
-:101720004C434F19DB17D938919DA7D62819CF55AF
-:10173000FBB59077AEFFAE41BEDFCA913FBB7C7C6C
-:101740005EBD40E9D3CDF5528F23F7DAF4D2DC2F1A
-:10175000A0FD955308E2E3C6FD2A9EBF25E4E67688
-:10176000985B760E820E79145FA5F7167A3F0846CD
-:1017700037ED47309B10F76C2C1752F19C04BD17C6
-:10178000C651ADE9E7E14AF5D04770A57AE8775C44
-:101790000FF57D1E3D7402C644BF6FA23CD40D7C84
-:1017A000A88479DE2FB747F8584BF28FC5FDBDA945
-:1017B000B6DE035A08F206F3D93ED544ED46C0DE44
-:1017C00080C49504BF6725AEE58FAFB58311B083A4
-:1017D000E23AF0A3BECCED9436685F83F62CF8FBBA
-:1017E0003FAF1119E3F0E6FA1A27F3753F85F3F3DB
-:1017F000C475685FE9578CFEB54A7778F7EC22F834
-:10180000BDB33BD83EAC2B77905585804F8204CE3C
-:10181000E154E915F23745BFBDA953193EE5FD5422
-:1018200089A42C2C88EA91CA7E12595084F806F3B8
-:1018300066A11E0FAF275808EB7D9A02F1BED712A2
-:10184000FC4ED3E372303F35C6DF584E8C7885CEE0
-:10185000FF0DA9E371FE6F4C65EBD074B8D2F92F80
-:1018600080EFFA9C4CFF3D2E0766C2F360060B41E9
-:10187000D3F2BE54C62FB352E77E7E3ED941D8EF95
-:10188000F202FFC6C6AB9FE5FAE1E8F8A00EED5400
-:10189000FD6859E724FAC986E6063CFF78C175FD64
-:1018A0009F9C85FCDB2C15E3818D8F18D7911F72CF
-:1018B000FCF3D2B5EB19C41154FF2D81767710A635
-:1018C000FF426EF6FBA30D13731E65F0911A9899F3
-:1018D000D1736DAB5CCBF0DCAEAF3FE79D0DE76045
-:1018E000A95C3F2F74B7AB6B615E21DF348E3E0F76
-:1018F0000EF58F6A6FC33A15FFFC97CD1C2752393E
-:101900006E4865F2BB16E6E785F1FA1DA97F41FC3A
-:101910002FF4505061FA86DA4D21B09B565DDE748B
-:101920001C96A9D5646F35C437285FFE2DF4F3CB20
-:10193000F643C7D94F12862641BB941FFF8E8F678F
-:101940000BE7C76F717EFCF6E719D7D753191F272E
-:10195000C29F02870BFC4DF5FC23A94CCF7B9C5FFB
-:10196000CCBAF10FA90C77079DD7B86EDCFA05B495
-:101970004FF1C641685F4F2523E2DBE7F8F87F9C13
-:101980003A846F7F0CDF2DB5EB3F81EB10DE2838FA
-:10199000F91BC8938BE28D7699E30D25D69FEDA7B1
-:1019A000F88BE7D5DD6999179513B53F3E0EA94F22
-:1019B0001DC2214751AFEC6638A47EA8DFBEDE30E1
-:1019C000C8E1242EEFEF307DDCA0F6DC09FA594D9A
-:1019D00067F3A8A4337CF92A9FD7F7A494B8FECD67
-:1019E000AE687B5DC85F5B587B72F22CF67B204251
-:1019F000AF58256C47F887EBD3D977A29D45FC2AD1
-:101A000070AAB99D5FA40ED95FBFC071DD2FF60724
-:101A1000EBEF40BBFE285D23B17405FD62991743CF
-:101A20004F8EEB12E1B818FAFD078EA789B5334443
-:101A3000BF607C3D7BAB4B167CF2BBD411F8A39FFF
-:101A4000F3C7C5287F5CE4FC31908AF884CDC3EDF0
-:101A5000E38CFBCEFF90CAE8B39BD349CC97B9FF88
-:101A60000FF2F743F4F09C7C2616D7FAF3D356AD69
-:101A700006BF6593ECB3D0FBFF032FADAD0C008028
-:101A8000000000001F8B080000000000000BE57D37
-:101A90000B6014D5B9F0999DD9D94DB29B4C924D9C
-:101AA000B281246C20D858032E21C42841264F022D
-:101AB000448C88888ABA014C42802422B6B6D5CBA1
-:101AC0006242785A637D142DB60B420B16DB88A94F
-:101AD000A518700382F80EB68AD6DB1AC4F25084B9
-:101AE00005B55D5A5AEFF9BE73263BB3D905D4B696
-:101AF000B7F7FFE3ED3D9C33E7F9BDBFEF7C334B18
-:101B00000891482A215790FEBF1C13AD17F38A7C19
-:101B1000D42779F208991420AACF46C817F0373E87
-:101B200054C629022129842C946BE29431744079A3
-:101B30008BAB6604213DA57DF36B22F4BF2789F5AD
-:101B4000BF21635D798A8BF6F7D27658DF49FF2D86
-:101B5000127263438FE8D18DBBE1A3C373D408F342
-:101B60007C37C944085DAF75A67B9FAB804EE334DC
-:101B7000B9379281FD1E4C94B1DF84A13E2981F6D4
-:101B80007BFD1451D6D37E374E13541F3D57253F4E
-:101B90005702DF578E2261FF32A8C338B96F4EA4B7
-:101BA000735CC69F57B988DA49E7A95288BA3542AB
-:101BB000BFB17C9F136223CF73139F672261F384AD
-:101BC0003FBF95EF6B4269E4F157F2F967389FAE7A
-:101BD0004822B09F7566805FBE592D56E8B81551F2
-:101BE000F0902A95AA80AF180A3A733E21B7D0B177
-:101BF000263AC1AD80735A3E2C7A2AE1B98782C356
-:101C0000990F94E01D0478ADB0A913605E7BAC5AC7
-:101C100005E538499D08E54FCCEA242809F113521F
-:101C200048C8144E3F53AC36BF184FFF51643EDED8
-:101C300067656D5F0C85FF3F53397C092102F10B0D
-:101C40005F5C02759F08F35FE1DAF78E40FB5FA1EE
-:101C50008D3B2A858DCB500EC7F1BA88FB42F86CBC
-:101C600037FFD065330D3CA7566EB779AC0087536C
-:101C7000B19E5AD867AB73BDCD45E1FDB2A7D3EA9B
-:101C8000A6ED1F271084E3E93875369CBB753B69C8
-:101C9000E8A4ED629CD0D2A9835F8362C2F5E62AF4
-:101CA0000C6F6F48EA5C986F8A556D84725A16C53E
-:101CB000139DF7D6E4BE457AB8DFC1F1343F898D74
-:101CC000BF4566FDC2F739973F2F96046F1CECC9DC
-:101CD000B6EF4331027F4E827F51FE293EAA4C9FD0
-:101CE000E1A0385B2EBA4DB42EE70A11F9D41BE2FD
-:101CF000532FF2A98BF2A99DD2871C993E82BC7FFB
-:101D00004514BA1CC3F7590ECF238C1FC1E9B6DCAA
-:101D1000D123123ABE98F35B78BFBA2491F1B19BFC
-:101D200054459AE787A17DFF10F7ADB07DE79B6B27
-:101D30001E85FA4C657F45226D2EB9CF319D380046
-:101D40001E2662C946385941AE491C4E749B04EAAE
-:101D50000BADAC2EC5CE2709B4CC72FA568D04F863
-:101D6000B599DD2E5AFFE0E80722A174B6F1A1D3A0
-:101D700002A1F2627B8090E46C98478619E1CFF46F
-:101D80008530703EFACC2569EB51D05C7994A81669
-:101D90004ABF571605A69278C378F2059DCF16E87C
-:101DA000F50A803F2BF1C65D8A64FCBB9C549C15F0
-:101DB000E74BA3EBC279E4CF880FCEA33A3DD564BD
-:101DC00024218981BE1F3563BBCD3D01CF456CC049
-:101DD0006FA1732E44FED3F625DBFA9EB89FF6EF73
-:101DE000FE3CD67D2F9C3B50798CED8778EDC0D79B
-:101DF00062B51BE43B2116DC9F89FE077C362E482A
-:101E0000F79BCBF70B8B14E8F64F069EE761B1E624
-:101E100015C0C7AD56A2C6E7A37C7815F86198999E
-:101E200076A0706C57049F97F66B7F68CEF26C902B
-:101E3000D7AB25F77002744EB60994CEC7D275EFB2
-:101E4000A272472E223685D665273B7FFB7D8E7595
-:101E500071023C97C84CFA7C6CC07F46A0708877B2
-:101E6000D6552BF41C321F2F50C0C178C1A59099B4
-:101E7000F940B7BD2241F9E0447868FCA37E8308AD
-:101E800087ADA86A08D057B944BC56DA5F70B279FA
-:101E9000AF2401910C033C504540CB52E2C6F27E88
-:101EA000D1730CCE6395295EE9FEAD26AB6F890038
-:101EB000F8AB79B50AE15EAE1CCE0DC9B368720805
-:101EC00020775883ABF8F5E55EC5A2C87CF58F1086
-:101ED000DFFC03F98630BD3C6D28933B7BEC7D3302
-:101EE000F57CBF5C61F26939976B44627CB65056F1
-:101EF000CD89E7E0F3D55C1E8E4862F2B39544E6E7
-:101F0000E36712D9BCD3EEF5B50FA2F09B9224B8CB
-:101F1000410F576CA99506BB42FD06717D989CAA9E
-:101F20003A60DDD6EDEEA33E07681F19F57BFBBBDB
-:101F30006406CC5FCBE5E7DFF8BC6712D93E86F0DC
-:101F4000FA41C13E23125CB213FBE1929D08E7F413
-:101F500030B88871A3027EBA0E19CCD7310BB84EB7
-:101F6000CF50261F872719D719CAE51F95FB1727BA
-:101F7000A2DCF76540BF97CD6C7FE1EBBA43EBBACB
-:101F800071DDF96CDD4920E781FF5DFB5E10757640
-:101F9000D7A4808780DD033C6C2A0CC97BD9E51768
-:101FA0005B687B7114393F8E9F9FAE330EF6455AA6
-:101FB000181EFDA9EA9550A776C17858BF67A88278
-:101FC000F2F2F54126B29EF2656DFAD0EF83D8D4D5
-:101FD000E6F95522A3879EEC76E72C8A2F3940DC60
-:101FE00016A4F306947BC55CBEB46EF71078EE1DA4
-:101FF0004465A66EBC1C986525363CCA3FBED0FA27
-:10200000533E6A0F0C4DF044C08B56AE5ACC44116F
-:10201000712DC0710BF9B8F07EB68777C5C1FC2B66
-:10202000A1FF370899CAF1430F8CFB9BC479A735F0
-:10203000B03EAE8FF6DB9E3BDBB01F7C4EF9A83D79
-:10204000F78938B097BA33A91E0039F5928872B271
-:10205000DDCEF0D89E5E47F4F66899D32F1E8679C0
-:10206000CECE26D329FE8A9D1E72913DB4EFE2DCCE
-:102070003AAFE0C0F66763E83CDF4EBC08F12EE7FC
-:102080007948A50DE0D249EAE8F965C52FBA695942
-:102090001620FEF105D09FCA7981CDE7B2EBE7218A
-:1020A0009D308FECA6F400E3027EDCCFF6A3E7863A
-:1020B000A32DCF6490DF1A5F52BBEE5EC07FB97272
-:1020C0004D79229DBF714B76BE48E7AF74F6C8B319
-:1020D000F2506EB7029DFC2A456D4BFC5FB4E7667B
-:1020E000109F19F03E218BE981294D826F3D854F6C
-:1020F0007B989DF018E7C7B12179B716F9AB48B3C3
-:1021000013D4C713CF6D07AF83E7E7B0837F06CF44
-:1021100023D8C19B12991DBC19D6A376F09389CC04
-:102120000EFE39AEFF15E1768D42343BB40BE673FB
-:102130002472B9FA7B668F86EFFF1E7EFEE5F4AC53
-:10214000BD4097924F6274CEF8F40ACEA7938E5298
-:102150007EC91B48FFDD94FEBD94FE4E53BB49CCA7
-:102160008E4E4FFE0BE4CB928719DFB73A7721DF13
-:102170003DCFF9B39BAFDF9D2B56033E5F26A222D6
-:102180000A03E76BCFF43841AE87F39F7AD648CF86
-:10219000654EDFEA7CE09B7DB3DDB0AD707E946977
-:1021A000593722B4EFC3C0876374F2890852E5053A
-:1021B000F021CCE319017646A204FCD74AD8BADE56
-:1021C0007D22EA89687C44E9E624E0AF1F2E006C9A
-:1021D000DDFE29DD04804E289F9DFA3AF4B28AD3B1
-:1021E00007F543FE0AF3E4F27A6D14FF4248EAD79A
-:1021F0000F4212F0F74CA687B2135D4847B5C421D1
-:10220000837E51C5CC2C902F745E7312EDFF66C295
-:10221000B9E7B525F5F39F0DFA93BBD8BCAF809114
-:102220003D66E0BC1392A8FD11619E0CBEBF1BA3CE
-:10223000F80B399A7D92D76F9FA4C37A39C037744F
-:10224000FD1D29EA60A86B7C53CCED961705A35EB3
-:10225000BEA4DFDF677A2E8DDB2F644EFFBC390012
-:102260001F0D9E9A1D50CBE583364F2EE7BF614967
-:102270000A1BDFC0C63BA04EDB2BB9FF44E172292D
-:10228000C2DBCA9E9FCF2F7A4061718B3ABE2F2945
-:1022900051D1F41BC2B52A9ADFA584F43FAEE7669C
-:1022A000FD4770F8D07615DBABD93EC62A0CEFE1BE
-:1022B000F18368F8D1E0EFE4E723B96C7EE2ED87C3
-:1022C000DB64985FA39768707B3381C16D9206B71A
-:1022D000363E4F983C5825755A9508E7BC91D3ABCC
-:1022E000568FCB35CA8768F1943121F8D4221C0A65
-:1022F000D8BEA3C5572EE7FDAF4CEA875F038EB368
-:10230000B1FD3EC0E5356D9F87ED196CBE3B42EDDA
-:102310004DD8EE64FDA3F9FD7770FD3537A97FDC5C
-:102320009D38CEC1C685C713B4B299EF6F7E68DC05
-:10233000DD382E878D7386F0BE18DBAB58FBD78D4A
-:10234000BF39F9BADF0DC16515F2BDCACEFFB7843A
-:10235000FEF6EF637B315B379AFCF85B029B6F05FF
-:102360009FEF4AF08BE91C8941922B39C06B8A752B
-:102370004FA05DD282AA1FF447E967B20BE47485CF
-:1023800068F30A541E4B2E2BFAC9311251C1AFED1E
-:10239000F9FC5BCEBE3CACFB41AF2F8B29B182DF99
-:1023A000B93C5B72833E2C794062FEF57113CAFB27
-:1023B0004A713ECEB34BD1ECDCDB0D7EB44B715594
-:1023C000C7C03EAC227131FFBFFA2AFA7C3C97D7D6
-:1023D000BBACC926986F6C268B178C77D5A1BF4EE6
-:1023E000CE323F5AA5FF31F9ADA25E96F93829A346
-:1023F0008508581AFD6D99AC3E258E44BD8076D473
-:10240000D880D1FF965D9547607E99E8C6D175BBAF
-:1024100093EC0EB4A772C8F02F28FF58720562A182
-:10242000FE4585E4F1031E26BAEA94527A1E4B86D5
-:10243000C70A7238C7EC1F0CF184B60CD9ED05360B
-:102440007CA8DC9A0DFE5607F5CF110E6AD2352313
-:102450004278B214AB04E890E204F9ABBFB4B132F5
-:102460002599D1F1F1240BE2B382D7B5E7E1782FBA
-:102470004C8E65728458BD1FE6829C104802A5C32D
-:1024800005A42F0BE8312D9DE98F26535F2AD44FE9
-:102490009240AA8396AD1D525524FFE727DC2F5B9F
-:1024A000618A6C2FFDC43CF17D80830471834B31C4
-:1024B0002EE0B10C0BC50F347B558B2344B35BEF7F
-:1024C000176B8EC13C82E23F03FD07DABF5E76EEFA
-:1024D0000C26A7B552DB472D87CBE0642B9E6FE718
-:1024E000DD6564960BF1F439C7D3BECB002AD973EE
-:1024F00014C0D34BD98FE4405CCA9AFD9003F8B363
-:102500008A30FBB4C205B29890476D9EB3493AFB3E
-:1025100066624E2DDA4DC5592D684F2D8BE2977EA0
-:1025200047C38F4627368F39790CC4BF165A61BC12
-:10253000A4D4C442B93338154B6AF75AE0F9B20C47
-:10254000563F1F1EDEE37229DAFE27805E80784D3B
-:1025500046FF3952607EFADC2BE787CEA1DB5F7A3B
-:1025600072CAC0FD5993993ED2F625E570BACC35B2
-:10257000D25D4D32933397246BFEE205D3DDDB173A
-:102580004277E1E79D98BDA8EA6212DABF765EED78
-:10259000FCF4BCA3E13C15123BFF46C5A3C21414D6
-:1025A000CE05008701E7B246D6FBAE64D397E5A31C
-:1025B0004792865DF879BEC4BCD393BF049CF68C69
-:1025C000539D204FDA52287D523CB509ACD4FADB3A
-:1025D000397D3EC3CB2F2327867F89F39538851716
-:1025E000401F8EF71C2C8365CA8B4781DA017EACB5
-:1025F000073C94E63D20CDA2F5F6BB67A3FCDC3397
-:10260000AE05F7BDCC6EDCAF56A6707C1467A9C8CA
-:102610007F6D9CFF2A08F323B57ECFF37385F347C4
-:10262000F87CE17CFDA84DBD0BF69592CCF61FF22F
-:10263000FF7A45BDFF57CAF5D738EB1D86F8C73876
-:10264000EEFF2DFB6CA8CD4B0F7A9AEAB57F8AFF7F
-:1026500077863E013F29A3D4AAF7FFDAAC65D8BE3E
-:102660002C53ADBAD401FA5874DF4B107EE80F7AC0
-:102670000551D918C11F5C9629FBC7D3E71685FC05
-:1026800014F65746F525C45F2C8A4A2E1A31D02FEE
-:10269000DC652D23103739AD9067C11F3BDF7936DC
-:1026A000271BFD4209FC423E3FFA854A0BE9C378ED
-:1026B0004F1901BB06DA5D2340EEA8C463073D4213
-:1026C000FD429D7C3A6DBD03F93D7C3D2AB79E06D7
-:1026D0007CB5298C8FC3FD413999D9C19A9C0DA72E
-:1026E000870A27A39B18BA7533931BDB9323C8FB78
-:1026F0002F2F9FE694830B703D59B2075CB5EB8298
-:1027000001095C9E6F27337EAAB13DDD06CFB5F986
-:10271000C3F1434FAE423C1DEC1916BFA1F61AB5EA
-:10272000A3CCD45E5B2984D65FC6E11D0D1FCB40D0
-:102730005F47E0A303C9262E7FC2E3447718EF5F0B
-:10274000142F7114B2B83E89007F91DB49CB29BFA9
-:10275000C0FDCD32B3DBA9009D6616BFE3017F3E0D
-:1027600053C6FB0822B538AFB10F3CE772889F45CE
-:10277000D8DF9F939310AED60C93C13E23E41E8303
-:10278000FD18EDDC84EFCBCCCF25003C73F5F00CCD
-:102790003B77B982E706B31EE68D37B9899FF245CC
-:1027A0007C1671A3C08A37611C56E37385F3B92682
-:1027B0000F6C0A1B77B56318B3CF445B40A4E75F87
-:1027C000E5A0F6349DA755DD857A551B9FC0CF6FD8
-:1027D0001BC7E28D36BB5F5122C0E17ECEE7D1CE72
-:1027E000D9A14A89E5747FF72BCCFE96C6996A7CFD
-:1027F000188F62F15A85C34E2C29B082DD3E091C28
-:10280000F814D8CF56451FB712F97EE2EC743FE7B3
-:1028100090932BC2F61393DB570EFB97B2552551BD
-:10282000B7FF0A876607F4227F479BEF3E2EE763D8
-:1028300072DCA40EEC0D9BDB0FF75A316A5D218828
-:10284000C5D85C3799AD6B8F550B475B7474D891C5
-:102850002947BC8FF82F0793FF7649AD81717645E4
-:1028600022704F66E7F672B479A3EDE37CEBDDC42A
-:10287000CF3B603D5764BB62A883C90D69DCD61AA3
-:1028800090D36484448647D013290EC6A7F1729F63
-:102890000BFC754A8F9E48F3890E99C3FB5FC41FDA
-:1028A0009ADD5DD2B56F28DD6FAB4D720B20BF8A0C
-:1028B0008EF6BA74F0A17A7D9643173F106D1E9480
-:1028C0006FA28BDDBB575998BFBD679CF19EAC8151
-:1028D000C3EF7D5E46930BE31D9A3DF6AF39E79754
-:1028E000C55F05E04E07970E800B01FEFA415B6B5A
-:1028F000047949E1D3FE55E0B39AC3E5694ED7D1D7
-:10290000E033CA61FA97D241387CCEC7D7213EF373
-:10291000914311E0D86A97D3671BF8BF03ED904845
-:10292000FDEA74E78DC6871A7DDCC4F14205A42157
-:102930002E203BBCBDCCAFBCD3A8E7C4F96E2E9F04
-:10294000C9590AB744DE3FD146FC71F1A1F9E572DD
-:10295000633CE179078F0BC4901880CF69F754016D
-:10296000F2142CA699A394A1B04487007A2215E60C
-:102970001949C8035C7E86EBC11495F9C983498B5C
-:10298000C0F44A06EECFC1F711AE07D3A95F03F139
-:10299000183822F8D38369DD0A360851F11E5CF03D
-:1029A0009AD05F76129F00F367903E2C87402A02F0
-:1029B0009D3F9BF40A39147F0F54D48D02F9FD0E0C
-:1029C0009CE392D039CE678F6AA5667FACFE37C193
-:1029D000FB93B07DFE1F82F792321DBCE51423DD10
-:1029E0007C597837707887C7F38A219E970DF13C20
-:1029F000FF6EE053F92CB33F7AFE2E637CAF2D9B24
-:102A0000C5F32AC4EA35780FEA92D1FD9072FB56DD
-:102A1000419E936677A2CE1B168AFB594FFD4082DA
-:102A2000380A918E229CF06EC885F22C3B05E53168
-:102A3000B323C6F3FDCBD973AC70EF1DF29FFC221C
-:102A4000B33798BD24733A287696A2FFD276F6DC87
-:102A500076C785FA493BA53D787FADF947AD8159E9
-:102A6000E82F858FF34BFEF7E0FCFE80EC827C9331
-:102A70006E7E2FD67D6AAF214E1BEE076976D57824
-:102A8000BEFFB28067DFA570BFA5CC222CBEC9E017
-:102A900020F375DA9CA7F11EFCF9B326F4B74E7348
-:102AA0007FAB18FC2C3BF377EAEC03CF794DCA459A
-:102AB0008638BCE63FC138C8AB2B53FC22D8739A8A
-:102AC000FF04ED2EFB40FFA9CA127805F637E51585
-:102AD00011F342A2C137DC6F0AD73F335398FEF996
-:102AE000560A8F1784C1538BF785DF4BB76BFC27D2
-:102AF00079053DFF87AF2FEF9A88FB278A2E1E3B73
-:102B000034144F14542FB92B3F143F8C10376C01E1
-:102B10003AD4E2869A1ED3E8D842FB5AF19E397223
-:102B20003CB13B7BEF30E617BE900CFC59A1B0B82E
-:102B300091B63FEA17DE93A2C3477180E96DCB7F60
-:102B4000B5F42DA1F02549C4CDFC83169795D62B5D
-:102B50001592BC12F9CC86795AC50E01F94EF2C70E
-:102B600060BDF2B8DB1743EB965D2F89A203D69BBD
-:102B700045628410FD68791D6D810F5601FE4E1F60
-:102B800097DCE7F2BB2B218866F0936243F844F9A7
-:102B90009664A83F22791E4D413B6150689C08F91C
-:102BA00060430DF967CF48EA63D06FBA55FD11F65F
-:102BB000FFCFC3FB2F53305EBCF72BE13DB40ED3E8
-:102BC0000760B39174DD7A36DA7839ACE342FAEF14
-:102BD0008F4B2F22781FB309700671964F880FE232
-:102BE0002CCF995F14411FB5F379AE201D2E7918B3
-:102BF000DB2FF4DBBCD1B90EE8E2AD946C9CEF396D
-:102C00009B67F528DABE6F83340AE236ADAE67AC57
-:102C1000903FBB6B637B469F8EFFF66DF60C89E49D
-:102C20001F6A25FD4B3015E1B9E259A98A2627B65E
-:102C30008B501F609F6DE852609DCD1BAD3322C548
-:102C400035E454C6EF576C60766D55AEC90DE2ADF4
-:102C50009878A524B88F7113B79F36C48DD8DA5BE6
-:102C60000ABA285BC47B0D5ADF1D4FEB716354F425
-:102C70000F2E1EB115C75FFC49A99BE5517A6DF96E
-:102C8000B4BE2AB774CC4A5A1F12EB39067C45F5FC
-:102C90004C8784FAB4330EF200E2464C4D59496B2E
-:102CA0007102A98964E7FE3D85D9799BCD1A5C251F
-:102CB000CC83DCB55146FEDA972EE2FD1385DB7C32
-:102CC000A8FF393D8E504A24E5AAB71CE058413A86
-:102CD0005BC19F2A775DF3423CF90AF02BD8AA002A
-:102CE000FFAF8A6287BFC5F7874284D2CFDE0D6D02
-:102CF00037920879D4FD79D671AA2515EE57F8BD1B
-:102D00002E714E45FA898EEF7B99BFD9E96F8DA55B
-:102D100070BC624BC720FDFCEF42D0356520BE2160
-:102D2000FF995C0AF9B71ECCA76D3D6A42F8BD9CBD
-:102D300027F8040A9FBDB922B5D9E8AE72ACBEE14E
-:102D4000B4BE9AD371F596FD6D8380E5531DB8EE40
-:102D5000CBB94F58597EEB85C7AF47533E6884FBCC
-:102D6000648A8F094AACCF45F1350FA6A0F5718A68
-:102D7000D5E7A7EBF5D87BCB12E812CFA508EEF587
-:102D8000402FB94401F9812E8889214AA175101973
-:102D9000484F0E82F95CAB0AF3D6435C6C6586AB98
-:102DA00013F20D778CB062BE59783EF10EA1E58525
-:102DB00044884B250A28AFF7E6BE89F7747B332C8D
-:102DC00004E815137EE9F3B624C6A7710546FBB3E4
-:102DD0002A359BFB9FC46B290CED2B2EC7AAC6502E
-:102DE000427A31918DDF9723F880DEF6B9B87CA066
-:102DF000E7DD080691D4214D1F111DAF2F0D9FE077
-:102E0000D2EC62413BA769E0399E137CCB87C23983
-:102E10002EA6E7A0757BAE80EBDB9595B7132C8BC8
-:102E2000EAE11E337CFFF7A632FF50A664970BF24F
-:102E3000AD73F9447D7E8C5C74FB145B3CE631A180
-:102E40005D99962BE079261E65F7B903F2B315E27A
-:102E5000910DF8A156476A68BEB8CF9EFD36E4FFD3
-:102E60004E2E12FC31B01F9EDF4CFFAF07F48B9C3F
-:102E700053CBF2AF73D7E179261599DD709733C93B
-:102E8000E6EB28A5F5978E4918CF9E9C3301F3AB4E
-:102E9000C3D75FA9107F1585EF4B7912C23BE6A21D
-:102EA00027709ED7F34C286F26433E36E42FEBF372
-:102EB000AA511F1AF3B9278BFFAD9640B39BF12B94
-:102EC00091BC8340BE4F711AE1673F6ABC2FAE2EA2
-:102ED000B018EA93F3E4303DEC457A793193D1C5EB
-:102EE0008B170BBEF5D9213A9B7434C90774067F42
-:102EF00062A1018E8673C6056415E0B7EFE29F3DBF
-:102F000008F72471AE65B7E33D3887BF4627711CCB
-:102F1000EFF68C5F7F1BF49406FF703AB870FC5F8D
-:102F2000535302F82FD0EEEFC3F01F866F8C416A27
-:102F3000E7183610EFB87EF6407C6B7430E0DCF7B3
-:102F4000752D1F4AF1FAB29D3E003CAF937DF70A02
-:102F5000213C9D17AF392548372B950E1BC8FD988E
-:102F60008B0ED9C03FD0E88288DD057A7BFF9F8534
-:102F7000EFD2D5027326DD820FE27A6FC0A3CB4376
-:102F8000EBBC98DA9FD7F5622AD855352C8FA3551C
-:102F9000CD67EF5D15307D1A2E1FFE902AE2B81E18
-:102FA000F38B19E7CA53ADB67908DC8FB542BE1D65
-:102FB0003D9FBCBA16DE6820F2B45A949764B5C03F
-:102FC000F2108A7F8BF27D8ED3B75488B01E5A32AE
-:102FD000B84F17937BC5C9D89FCCD0F2926ADEC791
-:102FE000FD4F63F50BDDD76BFFA47DFD9ED20A8BF1
-:102FF0007731BBF96A1E97D7ECEE2936967738A55C
-:1030000058447CBCBE41F0617E24EDE7A574D2C873
-:10301000C9F66A6E079E2E7AA67D940BEC41D560A8
-:10302000770AC53D68F7251419FDC14435D680FFE0
-:10303000E4AA24433DA56690A17FDA8CA1C6B8829C
-:10304000E79B86E7831BF20DF5CC962B0CFD87DC06
-:10305000556AA8677B2719FA0F5B3ED5501FDE71B2
-:10306000A3A1FF37D6CC323CBFD8D768787EC9A69B
-:103070008586FA88CEEF1AFA5FBAED5EC3F351FE89
-:103080009586E7A3F7FDC0501FD3FB98A1FF65EF1E
-:10309000AC373CBFBCEF49C3F3B147B71AEAE30210
-:1030A000DB0DFDC7077719EA25E41543FF32EB6F07
-:1030B0000DF50AE53D43FF09CE4386E7135D1F1B6F
-:1030C0009E6B743039F75343FB55EEBF85BDA75354
-:1030D000C3E21C100F18068F3AB08C259DEC5E875A
-:1030E000F462F960A1A73C0DE8F3C7DE7648486AB0
-:1030F000F506FE0857D3AF170D4B60F6934AF4F26E
-:1031000053CB4FA57E8B378692427C90D2ED684A96
-:103110007741014B2548256B32C47B62B04C0A26AF
-:10312000637B7230114B477030B6A704D3B14C0D9E
-:103130000EC3322D988DA533780996E9C18BB11C49
-:10314000141C8DE30607476199111C8BED99C1CBC7
-:10315000B1CC0A9661FB90600996AEE0642CB38313
-:1031600013B11C1ABC16FB0D0B5E83654EF0266C6A
-:103170001F1EBC01CB8B82B3B1FC46B016CBDCE08A
-:103180003C2C2F0ECEC5F29BC13B70DC25C1DBB1C0
-:10319000CC0B7E0FDB4704BF83E5C8602B969706F8
-:1031A0009760E90EAEC27EA3822BB0CC0F3E88EDB5
-:1031B000A3830F605910FC11B68F093E8A6561F038
-:1031C000092C2F0BAEC3B228F8732C2F0F6EC6F24A
-:1031D0008AE033386E6CF0692C8B83CF61FBB8E0EA
-:1031E0006FB0BC32B81BDBC7077BB05483AF607BCA
-:1031F00049F0252C4B83BFC5F6B2E07E2CCB83EF84
-:10320000617B45F05D2C2B8387B09C103C88655515
-:10321000F0632C27068F613929F8298E9B1C3C8589
-:103220006575F06FD87E55F00C96FDF22E6ABEB231
-:10323000C784FE2CF753A3FB0B5E949766FE5E1CBF
-:10324000E45663FE7F8BE0C378A1A3EF05A89B8BB8
-:103250002C182FBC9904F03D813F903E3BC8D39E73
-:10326000CB8F6440BCE9F5147FA63EDFC1CCE30000
-:1032700015E27109FCD5298E5D29A04F6FA6CD906E
-:103280006744D42F300F720ACF83BC59A20E16DDCB
-:10329000EA7E98E172ECE7B7D0FACC6AA2E6D3FEF8
-:1032A000ED975B30AEDF9E4FFD205ADE97CDF26585
-:1032B000BBD298BE7C2A8DF9A5CFA531FFEAC942C1
-:1032C00096C733F3F6E18C9FCA93CFE33731387C4E
-:1032D0006324CFB3B505B2303FF602C79D48E57908
-:1032E000B5BCFF836935CFA7D1766F29C96DB1858C
-:1032F000FAD1F65D51DAF7803C086FDF6562F8F0CD
-:10330000BE2D723FA12661EA39FC84D717F77EF300
-:1033100085E1A1FA1B51FC504296B0FBC35DC7AAE0
-:10332000AFA7FAF0EA22D14D2507F9EFC5DBC67D3C
-:10333000389CAD0BF999DE5211E317338BF7EF4947
-:10334000A6F5998B1231EFBE7F5FA5667C3EC5F96D
-:10335000F6375FA047BFB9E537E33E34C4453D6863
-:1033600077DDC16994A8E6BFF669CF915E59DCF7B5
-:103370000E58DC05F2CF8CF3F6AA66DFB9F263884B
-:103380006A21AA81EE19BC56C1FEC1F7275613ACBB
-:103390001BCFFB50B8A2DEF7C6CBBE56019C7757B9
-:1033A00002D05D5C5E809C2BBE0CF0943051A1CFAE
-:1033B00006764C3478A63819FD2514AB4E2FC54F30
-:1033C000DBDF45BCE7DA9D58A800FD7FDF9693065A
-:1033D000FCE174327A6DEB7917E35B090501E2B524
-:1033E000B1FB739705E2F8562C972E7663D9B6B8E1
-:1033F00008CB95193FB042BC444C91201398C4644B
-:10340000CEC17890B6BE397196B5C44DE75B63A95D
-:103410008610920871066A2224D2FA12EA539C4D51
-:103420006374FDBAF3431BF0C3D93417D64513BBFD
-:10343000378E2BF0AB909710E7564A2557A81DFF03
-:103440001CD8BE1EFC91D749DFEA6B018E2A7B1F78
-:10345000A395BF6FDA5A329CC3551B1786F7303CD1
-:103460008BB21BEFADC558DA3F2F3A5EF39C2C2F81
-:1034700001E84BA2F4F529DF3751E34C309F86DF9A
-:10348000D35200F3A95A85C87997851ADC155539A6
-:10349000D73D0A51A4BFEAE5A92D6F5B183DDB506B
-:1034A000BE621DF2B9B8BCDA9BA6163BE9FC8BAE36
-:1034B000E472202309E5006D9F7E056DDF66627E64
-:1034C0008A3749467EA14048803C5F6275254C3D65
-:1034D000471EC4B2C58A2A99E17EC09500F05AC63B
-:1034E000F3F5E00D65BD1CF857F50BC90B1F9E2BBE
-:1034F000BCFF3613E7ABD8183C97C8E1A18D9BEF12
-:10350000E4F238BBA6D689F1115706C8555A9FED8B
-:103510001C83E7CF00BEA2F5DBB0AEF4D7EBB1BFA2
-:1035200093F5C7449A0B90C3745C138E93FAE769C2
-:10353000C1BAAD7FDD85B88EA3BFBE08EB19ACFF65
-:1035400085AEA395FDE77F93C9C9CF24352189C2F4
-:10355000A7E6AED935E5546F5F7BD75C2C3F58DCCE
-:10356000AB825C3D4CE5491B856B4DC93007F83992
-:10357000D75E35CCE6D2D16B3D8F6BEE5A6EAE0284
-:103580007D57BA42ACD980FCB4C49037B7CA69E65B
-:10359000FE0DDB471DE5F1BB29C9D5AFD9FFCD36FF
-:1035A0009D3D3A8BB865A0F7D9CBCD21BA263AFE1E
-:1035B0005458DB3693E7FB37C039568AFCBE82F39A
-:1035C0006B22E1FEBC2BB5E61C7A872CB7104F04AA
-:1035D000793C103E84FC95F2C167B61C8CCB524BF3
-:1035E000CD1A695E0D4ED1D6AB8F12FFD5E0A4C1C6
-:1035F0005B6B3FB47AB4C2EC6A9F018EB3EF1B835E
-:10360000F1CA7A1EAF278956CE9FAC5F1D5D672B2E
-:103610008C935417D03BD423C9176DDD3AFAAFBB56
-:10362000F323C197C361A599E9F130F81E5E333CDD
-:103630001EF45038FE2E14CECD1682EF530436DA27
-:10364000591CC93103E76FE0EB13C74CDC4F035F34
-:10365000EF859D717E13ED5FBAD1BE1EFCE093A590
-:10366000DE476A403EAD37633EDBBD3B57BDFD23C1
-:1036700078EF639D19EF4CE6C63D5C08F7B1A7B83B
-:103680009EA30AA007BE9FE021DA9F2AC0FCF58412
-:10369000CD7F52BBFFD89880F03C5ABEA17D2C2D27
-:1036A000FB762CA886B8CB919D57ED05BF796E2C83
-:1036B00091D231BEAFC8C87F5EF38746FB400AD5C2
-:1036C000C581F57AA8EBE247737DE60FF5743E6F8E
-:1036D00093B1AE8797490F2F57B9115EAE0A03BC5D
-:1036E00084E7ED7E5107AFF298E10ED0EBEF3A5D43
-:1036F000088F8698A5A9009F861D2BB09CB729C668
-:10370000FBA16EDD059D89867AF3B674AF5EAF9C32
-:10371000DEF7443CD0E142A7E8FD90EAB9E38BD55F
-:1037200056B0634E2CAEC252C3FF82CE6CAFCD30CA
-:103730008FB17EBA43A862F2D99530ED1CFCBAD0A5
-:1037400029E33A1F6D62FEE6478BAD5E58E7F862EB
-:10375000C5CBD6757A991DC5E035FFAE38EF87A386
-:1037600043FB8B36EF3F7B7FD4C22787AC04DFD986
-:10377000F9E21C7A3BAA5C923E93517F749BFF0C4A
-:103780007463A5FFFB02E3A812D6B5799B3B452FD6
-:10379000E41313B2C5B01E1DE73AACE3B7E87AC133
-:1037A000F89D8971100B43F9CCEE413C700F42E754
-:1037B0003B29D996431C41BB0769868568DF05D63E
-:1037C0003ED9439B3EE91A76CEF7CC299EB2412FD3
-:1037D00037583B6450B60D9D1797033F7DD2D59A5D
-:1037E0000AF2639E78FA5B91DEF7BA3E9DDFCFFB6B
-:1037F000CC01A3BFE8D3F6992D19F88CD8FACF4D98
-:10380000EBC7A3BCDF53CBE76DDAB2BF722CDD7F11
-:10381000D3B65332EC232DDD539B9E123ABFC0EF3B
-:10382000811A371D94E17C47CDDE8BBE772EFB7E5F
-:10383000C03E6D4E43DEA197F4027FCE2A221AC30A
-:103840005EFF1E9537C75E3113B83F2467692FFAB4
-:103850003C8B3F9D436AE2015EB3BAE6A1FC39F6B8
-:10386000ECE4BD2CFFA8A310E8E31362C2F7DC3F31
-:10387000216FC68FD6C16F75BA963FC9BE6FA3E5DB
-:10388000B7D00DA6637E7A437B2FBC376621929713
-:10389000CB25817DAFC627A03C6B60ED5E625D826B
-:1038A000E758CEE49197FE07F5DB3A8CF2A97E8DBE
-:1038B000B15E47A6A6427E77DD4366C8202273F537
-:1038C000F28FC2EF8E7466D7D7939676B0E71E97C5
-:1038D000595EF72C854883A91E5AF0EBC70B6B691C
-:1038E000FDC17476BFF311F733E0BDC774FABCF1C4
-:1038F0002E9FACE60D3CDFA1AED1D3C7129C8FE961
-:10390000AD46CD6E252E88E30F867F0D8D7EFEC1E0
-:103910005D22DE3B0D86769D7C9EBDDC78BEF39DF0
-:103920003FFCBC84FC00CFDBB8E91AF4DBB4F368DD
-:10393000F8D2CE63DE14F93DDF27D30583DDB49DD5
-:10394000C34FF3BB9F0FABBF10567F299DD9F72103
-:103950003F9DD1B799F337A5FBE781EE1758039543
-:103960008C4EFA64FD7DA81CEAF7C2B9FA5938BF3B
-:10397000D07E2FA58F89DE2F2634DFEB91E65BF01A
-:10398000EBA79E057FB4F1970FC7C365D031A9237C
-:1039900015DEB398BF71693CC0E9A8E48D07BA3958
-:1039A000E613AB22C14B1AC4E506516D02C57B93E9
-:1039B00046FFC54BA6807EFFF346B3027E61F32629
-:1039C0008B1FBEBFD4D43517EF6B68FD20AB2FC360
-:1039D000F72A9BB7993FD0E3B5F1670FA7627E073F
-:1039E000F10E66F7E9FEC1F0E9A0A60D7FAA043F3B
-:1039F000B99904909EC3C7C1FAC12494D7B572C2C5
-:103A0000C0E75ADCB4993591E6AE55A7206EDADCF2
-:103A100035F108F07D33913ED0D35303D034F557C0
-:103A20003E4FE779779791CB40BE68F020BE149463
-:103A3000CFAD9B7F38F220DDCFF10DAFC40B7A7F85
-:103A400095DFB79FEE9CFD7EF239F4C3094AA7FAD1
-:103A5000F73134B9EBDA46379046ABDDAC9C6FF604
-:103A6000C78FA5709DBFCE8CEF87CE7FEA899F3E22
-:103A7000067944EF5AF0FE63DE537BDEBE82D6E762
-:103A80003D6D7654B363D8E03E58C34B33FD1FDC25
-:103A90004F6878687C668F0CEFCF403BF8071A3E82
-:103AA000E63DDD23931103E157D6D923F7D922E070
-:103AB000A5F36025BE67B4F92F32E0FDD84E81A48E
-:103AC000650F1CDFB06E0FDA310027C423C7533FE8
-:103AD000DE06E0CB3F657B01F653406E9F0F5F072C
-:103AE00040AFA6205DFF623BDD47C3EF2D6E8043F4
-:103AF000C32FEE8887F31C915A187D3FBE3415F210
-:103B0000DC1ACCDE54054BD6DEF0E33B91EEEAF74F
-:103B1000DF99CAF20ED5749EDF910EE7BC6DED758C
-:103B200078CE3AE241FA6B785CAC813C98CF255272
-:103B3000F57404FEB89BF3C791F514B9F49C4740A3
-:103B40005E3A42FE8EF65EF39DFD7110760FF939F6
-:103B5000BF879C3A48CB5B67F2B79F6E372C43B95F
-:103B6000FA51A69A06F793140E9A1C45F92AEEAF5D
-:103B700048637862F218C751FA2B8376E8DF6BC688
-:103B80007B61DD382E3FD9FA8BF8FA74DFB1608F94
-:103B90001C498DFC3ED0A67EFEA7FA5647673A3EEA
-:103BA000677CBF6105E3738DEF7DD754C1F3CF7E92
-:103BB000C7F808C6813EA2FBF2A7E1F39E6902CADC
-:103BC000050BF147E2EF0D66CEDFC6E7D462477B17
-:103BD0004EA313BA7F09BE4716A217BA4E12E201CE
-:103BE000ED95BA87E8789D9DDD0CEB623F39D49E58
-:103BF0001DE2E37A2E0FBE3DC8280FC8DA940B8A67
-:103C00000BCC37FB7EFA18F02FE557AF0BF8D78CAB
-:103C1000EFDD7CBC65F7DB37523AFFB853E35BA3BB
-:103C20003C0DE7DB86AD77627C309C6F3FCE682130
-:103C300011F93683BF3717CEB7197DFF5679AAC160
-:103C4000EF2761F0A3F2F127DB5DD1E1182E1FC74A
-:103C50000E72213CC3E523FDFB1D291C48871AFD7C
-:103C60006974D7F8F30543400EF5D3A7467FFDF4FA
-:103C7000A9D15FF8798DF01B20DF20D949673F98E3
-:103C8000EF255E3BC577608788DF4B3AE90AC4437E
-:103C9000FC67690CB915ECF0930AAF27B27A20459E
-:103CA0006E0739A1B5076258BCF2644D203E5167DA
-:103CB0005F1FEC16E321BEDBE78BFC7D37CC48A40D
-:103CC000EBF745F9FE9B168F38191B3F12D78BCDAA
-:103CD000F201BE2A445BD65D9037DA21E2777CE6BA
-:103CE0002CB93E1EF2434E760FBB7A066DBFED2512
-:103CF000FE193FAF2AA55338CFE6783F4ABC8F1450
-:103D0000D3F3CDEE66F6F39CD591E944BB37AFB360
-:103D10002D92411E51BB35441F049EB3EF2C34AC91
-:103D20000D6BEF9E8CF4D418464F1EEE1F1D1BC466
-:103D3000F3FB479151DC3F31E9F3412AC4BCABE1CD
-:103D4000BB9C27F789986F7DBA5B24ED70CE2D82DE
-:103D50008F007F7B53902E9BA8FCD0C77F8F03DD05
-:103D60009DE33DBAE3BFFA43E1F76897F9CFBE3769
-:103D7000F247B43CFEECBB173D07F55F1FC87A8FD6
-:103D80000CEC5FB6F3CC2D20FF4FEEB4108CABECF7
-:103D90007C31EB7B50DF6EC1BCA393F75A54B4A7C0
-:103DA00077DA318FEE64268BA7B6EEF8CB48CCDB02
-:103DB000266D8837C760E6779CEEFEDB1FF1FDDAE3
-:103DC0006E7A2AD0B73BE3D01E6FDE1EE30327F5E1
-:103DD000E48EBF14EAEF2FBEEE799A6416BF3F69F6
-:103DE000273320EE753291C5AD9B9FBBFC892574AE
-:103DF000FD055D3D32BCB753F6FCDF4782BC39B9E7
-:103E000095D91127CC7D3F266E42860CBEE73E3306
-:103E1000C5D709B0ED28AF3C3778E755DEBC487010
-:103E200061703849E100E7A270690039190D1E85FB
-:103E3000FFB1F038750BAC3FBFFB32BC7F08C1450A
-:103E40005059BBDD6715F0FCAC7DE75F46823CFE58
-:103E5000B87309EAF7F39DFBBAFFE7CE2DF82FE41C
-:103E6000DC8BFE63CFCDE8FFAFA09FC60CE483815F
-:103E700074FEEB6F61FD177637EEF702F9FF21381C
-:103E80007FCA7FE2F9BF22DEB70A98BF723EBC3F0D
-:103E9000F31F7BEEF3E1FD258E77BB0279122777C6
-:103EA000FC3D8BE8CE7FBE73BFF97F94DE353BA827
-:103EB000D7D4A214D0FDBD4B3AAECBA6E51BEAA7E2
-:103EC0000E705B2D51EE694C19CCAFB0082CEF9BF6
-:103ED0005C2768F1A55E43DE534603DA1B53D4FB2F
-:103EE000D8F799A4965EC83BED2D9DED5E893DF215
-:103EF000F17B02BDD3C6F1BAD1DF7A5D20AA40EDD5
-:103F0000DB29A593F781BD77B52AA23D484BB403C1
-:103F1000DFCAAA64ED45463FE38630FFE0FA19C6E2
-:103F2000E7D7F1F9A693854A0185D7F40C49F151F9
-:103F300010DD50D26286F3DC70B3403A74F1CDEB01
-:103F4000C2E6FB2304D07476E497855F413FFC16FC
-:103F5000223C4889766F771EF81106EFDE69A35878
-:103F60007EB1E466F09BBEC08D7153EE879AF978FE
-:103F7000B36D792FF0AD9918FD4FCD8F8C0667C2C8
-:103F8000FD529C676808EE665544BF54371FC24314
-:103F9000C3C797C58386BFAF8B0F398318EE75B53E
-:103FA00072AEB5761EDC435821DF9DCE7BF56AF6F6
-:103FB000FE88354F4038D61499F1FDAD3F996A0A15
-:103FC000C170AE1E7D59D377D9B46E80CF5C0EC759
-:103FD0003AD282762739FBC517C58578FB8776EB01
-:103FE0005C9590ABA85F52572CF863E9F9EB25E29A
-:103FF0004DC88738A8403ED0C7417DC63AFC5D9980
-:104000001A9AE77CFDA3C9877F76F93E95471F5032
-:10401000A41F8412F366D8EF5D68FEE3ADDD0C8E5D
-:10402000CDF305DF50A423BF597FFFBB3983C5679C
-:10403000DFBF7B34CAB992FB472430BFB600F379A7
-:104040009AB9BD7FDAEB4A8078CEE9EE610910AF0C
-:1040500039BDAF2C3E521ECF7EEE57FE76B115CB4A
-:1040600093E542879880EF9D4C413D5C1E4340EEB6
-:10407000848F5B91A1C5655AD8BD246179F875FC20
-:104080001CF5746842920E6FABAF3A268D1C880700
-:10409000F8FB4077AFF275E10B7E2CC0757F4C5F6B
-:1040A00065A4EF13FE88CB85EA5D6764881F4CED3D
-:1040B000CEC6EF4B4E2D37BE07F86006F7CF4793BD
-:1040C000D1B0AFEA5D13E32F07BCEC13DD3114BEB2
-:1040D000CDDDA7644F84FBB97078C2FC10473E6405
-:1040E00076D7013C0FDD1783EFFFBFC6EF8BF2F8E9
-:1040F0007721E1D341103FDBC0E17A2683C5D1AF00
-:10410000AD2E31A7D075F3BA945190573688F73F4A
-:1041100093E1C2E783F938ADDFA0F9ACDF4159691B
-:104120008A74FE21598C7EEA89FB5B45C27F1EDEC4
-:104130004AEEB7FBE1BDB8D3E5027F6F269CAE091E
-:10414000F2C7E92AC107FA17FC58AC570BA8FF5F62
-:10415000D3F2EEA6327DA9D17D389CF767980C7911
-:104160000EA738DCDFE6F4A1C159836FF87EB5FEF7
-:10417000545E8DD7C75BAEDE36EA17609F34750B91
-:104180008A894ED524F5C9C087CDDB1E30C3FDC258
-:104190000DFCF759885433527FBF7B2683FDCECB6D
-:1041A000EEFCB1683F7EBA9AD9C7EA9C53F160072A
-:1041B000BD6672BF3116F8F175D1F05DF3F0F2BD56
-:1041C000C54A63B9593F6F36EEF3DAF92566080F31
-:1041D000DD34BFC79CA6A3A73319EC7B415AFBA0D3
-:1041E000F92ECC5FA4EBE13EBCDFB710C8C7C8EB2B
-:1041F000EC2D8DA3CF6F6A496474D8D0D923639D09
-:104200007D67585B4F5B279C9FA655C719EAB3CBC8
-:10421000FA32002ED516FF2277043A7D2853BB8749
-:10422000FA927A42A5743BF2FF073D71AA32D27727
-:1042300050676732FAD5E987B448FA61E112571A34
-:10424000C07FE18E6169C01C0B5FAA488DA41FDE90
-:104250005ACCEE0F0FF0BCCB93D3A87EB854A71F57
-:10426000A6C5207D848FBB2AF302F58386AF7FB37A
-:104270009C790BF44304BEF6641AF5C3F4EE5AD4E9
-:104280000FD3A789C4A58BC75D9F793EFD50927A55
-:1042900003D6CDEEB80874F316F74B00AE50C23A11
-:1042A000A027EECF64723F5C5F4493E7395902BFA9
-:1042B000DF3E8F3CFF5F82B326CF175EC7DEE31F72
-:1042C000488704E5F5C21B04FCFD92853B983C5FE2
-:1042D00078338F4B86C9D71A90AF057AF9CAC6379B
-:1042E00079983E68DE96FDC399F4F98D1D66B79501
-:1042F000F6BF31246F0BF5F2F6FE4C49837396122C
-:1043000001BF3366C61197515EE5809C3A34EAC519
-:10431000BC6780EE5F63EF99FD89EBF15747BD58AD
-:1043200000F1F4C37CDE67B9FC3AB1983496533897
-:1043300094CD61F6F0822D22C2A1A98BD9794D9B33
-:10434000047C9FB732FF0CDE1BCEDBC1EE0DE17BA0
-:10435000BE253A3CCE7BADAF7D303C5F27E0BD67EC
-:104360009D7B1E7BEF6F0D8B135BE97F902FB1223E
-:10437000367E3DC13C1D15E3CD0B38DCAA2D81BD39
-:1043800030BEFA67827B1DCA35637C7A41CEA46356
-:10439000E01FCCDB14D6EE5E81F7190B20EEACF3F8
-:1043A00047DEE2E7BB4DF4E73D0379816F88117F7B
-:1043B000EFECAD7038347C4D38ECA77028F8EA701B
-:1043C00068EE7E00F36FBEEEF90F64F2787B3E2953
-:1043D000007EF9934945FEF7BE2CE27BC5731E189B
-:1043E0009EA6CF53FA1387C36B264F7B3AF46B62BA
-:1043F000EF1FD7AF7D7A0FBC1A3EB3938C82B07D8E
-:10440000FD1AA39EECD7CB5D2ED4BB335B9E16E08A
-:104410007BFEB789047F076C76BEC503F7AFFB63ED
-:104420000228CF343A4CC892D877DCB8BD776850B0
-:10443000A01CFD8A6D82827C02DFD3803AC5037C9A
-:104440004F63F7E57FA9E470C7F84CF33686A7669B
-:104450008A17E0B34A6AEF821EB989EA1DBC2FEBC6
-:10446000EE3143FF06DA2F19E58E1BFD5D4D3FC18E
-:10447000FD5D49AA0E6F3B0E32FADD28B84904BC37
-:10448000E5D2FFCE85B768F8D2EC870BC59B068FC7
-:10449000842C23FEF6C7F4568FC67B2AF63B40A435
-:1044A0003B11EF553EEC188678CCE472369CBEC1C9
-:1044B000DE77E9E24BD7C0C6F1C3F531982787EB29
-:1044C0000E65F6905EBE84FBD1CDA417ED9AB47450
-:1044D000CF5319BABCB0E93C7FA5FF5E37D4AF3EDD
-:1044E000734CF47EC4598AF73F5A7E2DFC7214E651
-:1044F00083F1FAEECCC20333E9793F5D2EE2FBC9CA
-:10450000D79B5C6F17031FAF3413A0CB4F5F35AB46
-:10451000CC0E8D43395CFBDA213384466A21BF809F
-:10452000F6ABBD87C9DB4330196DFB3DD5632A7CF3
-:10453000B784748E81BCFD69EE9E0AC8DBBEAE6096
-:10454000FF52B8A7BBB64C79FB6D80EF0A91007C97
-:104550003F585E86FECA1DB70B48D7EF2CC6DFC298
-:1045600022D74DCB7EFB6DBAEECDCB53F09E6DA620
-:10457000BAA702E86DF6D5761BDCD34DCE15894778
-:1045800007C79B49EF5290DF335B6EBF0EF6DB40EF
-:10459000F502C45D1BBAF757A4417DAD80BFA3D619
-:1045A000ECF5C8F00A54EF9A5332C43FEA683F4032
-:1045B0004FF35AD6AF798380EFF7D451F900E7ABC8
-:1045C000DB20107891A497DA7F5636AF0F3ECCD41B
-:1045D000BB968EA7F57A180FF36E48C4DFBB6B7ECF
-:1045E00095BD1F5457B4642FC8A73A3A8E3E26BDD6
-:1045F0001B6EC7F9E6AE1508A4063714657FBF0821
-:10460000E67BD58CDF0539D0F3A80CFBBE85AE97D1
-:104610004EE79F2DF655609EF5F70405F3A0ABBF5E
-:104620008B783BC9F980647C87F199C0EBDC2ED490
-:10463000F4E3C6ACA12CCFFAAE25ED70AE3E6F4AC6
-:1046400036B844CDDB4EC960E77DB8183E3C43F137
-:10465000C6F3E0767B0FC97D3A39B52B6B188E9F78
-:10466000B3AD04F9FC365283F7E29E254C2F1F5C54
-:104670001AE313C01E312BA837772FFDC62370FE17
-:10468000134F99F1BEF444661FC6678FAC35E377CC
-:10469000435AD78A28478E6C617121F1F1EB2AD3F6
-:1046A000017E540E00DDED5E5B26833C3CE2137020
-:1046B0007CD9E377A6B2B8AF517ED4B91A515E3C2B
-:1046C0001EC3E443FD9AC8F7AB51E5C5A24A26DFF5
-:1046D000C3E4C1828C768CFB85CB89666263F65D10
-:1046E0003EC9877AAF3F1DE9B7E9553301FBAE49B3
-:1046F000526E5903743333066E92295FF8F7807C4B
-:10470000FBD427B8BCF4F94DB7FE660CC0EF30C03F
-:104710001BF8627532DEAFD6F96A11AE5A3E62FD01
-:104720001A233D6B794F3778C4D07B3EF47F373501
-:10473000C41155D7EFC03D942EE97AB76E137CF0C3
-:10474000FDA303F71CDC7B6701D615A0C3A6BBB88D
-:104750005E5D6D47BA3DF09D534B812E6FB95BC0D6
-:10476000FD13AFA71DF44AD31AC10571CDFABBD909
-:10477000F87A3A1EE8E5C0A38C7E281DBB80CE9B4C
-:10478000D63EB017FB6F105C30FF8175B5A8871B54
-:10479000BC22C1E71B0EA2BD4CF501E60DEDF68A69
-:1047A000A940E74D6D1605F0AAD18B467F07F9F7B2
-:1047B000A789D53DF25AF87D8A2C5744BA1367640D
-:1047C000237D356F3123BD347B193D1D7C4A443A2E
-:1047D000DCBDF4FA4AA09F131B8528F447E9AB20FF
-:1047E000445FE2E3661C5FBF99C51776AF65747DD1
-:1047F000A48BD9A7658F0F47BFA6FE353361F1079C
-:1048000062D3DB1FE7A3C370BA1BA097381D46A372
-:104810003B8FB9733AE41FD4FE82EEDF15825759FD
-:10482000FB77300E50D67E039E57E31F78AF05F21C
-:1048300036E6742C61F98C12CBEFF9D2FB0ADBC798
-:104840008321FD980FFA11F24FFC741F2F6E79022D
-:10485000ED804F9E3C88F98DF39EA3F8A7FD4F6C29
-:10486000B1133FDAD93E94338D5D22E69712C95FCA
-:1048700078ADEEFD2D2D2F63DE2FED08F7C6AD16BA
-:104880005F351DDFF8ECA191784F7E2FB353BD4FFC
-:10489000B2EFCC106FDFC86B213F5362F921E1FA10
-:1048A000D73684C5718EFF260EBFC7246CEAC17B44
-:1048B000A6C6CEEBCD165DDC521C6266BF03F19B33
-:1048C00038F69E19C53FDC2FC2FEF4BF27A1E5854F
-:1048D0001CDFCCF8A7719B19EDA3C64DEB30DED7DA
-:1048E000BCE914E6CF96FDF2A9788043F336D1985F
-:1048F0003FB549F45B30CF4B3C6861DFE530E431D4
-:104900003575B1F73B9A3A799E5058FECCBC5FEEB4
-:1049100078D64B4133EF999FC5033F7DD4BB311E01
-:10492000E049E7C3FCA3AB8BA2E4279D2F2FA9731B
-:1049300005CF4BBA0A7FA7233C2FE923F807D5E31D
-:10494000F94338DEB5BCAE4D4C6E51EC17467A0FCC
-:1049500049B35FE63DF5F98F218FF6F8D68F7F0CCE
-:10496000FB9FFF8F4F7F0C791D64678C02F644F329
-:10497000936F61FEA136AE7A08B3A74E6CFE19E6BE
-:104980006F9E78D78276E1891D47B2C05E38F1F418
-:104990009954C8CB5CB4A302E3138B7E5586EF8792
-:1049A00046F337813E7D17903F1A8E8FDD5DA2DF83
-:1049B00046F7F9C93B16E4FFFE3CB3CE052C7FCF8A
-:1049C000C5F3CBB644CED3D5F2A19ABAAEBD7A1C0C
-:1049D000C8BB2EA6D7FBF3A3CE9757F63B8AD74B7F
-:1049E0002F007F5B78FE60E75511F3CA3E817F5050
-:1049F0003C350E31E6957DDE75DB4F1E83675D919C
-:104A0000DFD3D6F8FA7C70D3F2802F1BA2DE3904F4
-:104A1000F868EBCF318F0FF056ED02FDFF7916C429
-:104A2000378F9A0318370CECB02890EFD5B8E30015
-:104A3000F2CB895FEDC73C5BC2F3714F90FE3F96AE
-:104A400037C96317CD1BEC2C1F8DC31FF2D55CF14A
-:104A5000D8CEF3D2181D6BF96AD1F2D47E3E84D938
-:104A6000415A7EF20257AFACD842F802FC084580AA
-:104A7000AF8386FC3FEDDCE1F3290087CBF4F997A7
-:104A8000D1F201B99D3E005F4C2E9F58C7F331FB18
-:104A9000F32CA949970FF9414C1F36FB840391F081
-:104AA000ABE55FFE340CBFDAF9A2F185C69FE7DF04
-:104AB000F75783CB9A212CFF5F83CFF1B391E57435
-:104AC0000FE777EAB7F887E8FC965BB9DFA2E59DC8
-:104AD00069FB6DEF647AF9F826663786F3775394AD
-:104AE000DFD37A6308F3EF9AB6F58C0439747CD778
-:104AF0006F38DD31BA6EDA7250F672B9EDD3CBEDA4
-:104B000028BF5FF62EDF37F57723CED7BCE554C438
-:104B1000F93E92D4EB61FF1FF5323BE4A34E31E244
-:104B2000EF20ECE67AA9FFDC7619FD2E313E16E582
-:104B3000D1227BD13BF05DB7457619F31D5A97F032
-:104B4000FC887BDCF83B1EADF649F8FB0F4B013EC1
-:104B50003A3FD4AC78F07727CCCE9A02F0AFC2DFE0
-:104B6000EB941D26E2D3E35FF2E2FBBD5386FE45E4
-:104B700002BDD3BBD8F8DE48AFA4EC49A6F3F59646
-:104B80000B6EB07707D29971FE6B54D1103F8358EA
-:104B9000359CEBB49B7D0FCD6EF22BB40BB1C7F4FB
-:104BA0003AD1D173B1DFABFE1F05EC5EF50080009A
-:104BB000000000001F8B080000000000000BB57D06
-:104BC0000B7C54C5B9F89C3D67379B6437D990047A
-:104BD000121EE1ECE64D4258C2534539092426F233
-:104BE00070414554D4253CC23389F8B8D4D2B24080
-:104BF0008C88B40D824A7BD12E34A87F4B5B40BC9D
-:104C0000050DFE170816ADB551D16AFFDA06880802
-:104C10001A6005CBCDF542B9F37D33933DE764438C
-:104C2000D0DB7FFCB5C39C7366E69BEF3DDF7C3336
-:104C30009B48E89F8790752BED598A959004E295E3
-:104C4000884C88D3AB04DAF208FE5DA1FF4B24B494
-:104C50006EE775371647B34613E2608FE87BD701DE
-:104C60008B44485C1EC9534612E222715E99D637C6
-:104C700026686F4A0984AC77FA27D3CEC915F81B8A
-:104C8000DFBD245EA51DC6B3D3FFAE507812C7D2D8
-:104C9000BA3D327E9266AC27135D1DE1D108E90B67
-:104CA000CFE99F4A48B94C21A3702495598231120B
-:104CB000BE9F9CDD37026F522AF186E0FD148737D4
-:104CC00040BF7738187C025E0ACF718047A5FF216C
-:104CD0003C856D010B41B88EEBE1A07F92CF89F04E
-:104CE0001D37C1775C0FDF30D59972B2805614A2A0
-:104CF0005CA1F875D85B09C7F3793D9E0909106579
-:104D000034E053E095BEA7FDB8A54DCA1509F0EAF9
-:104D10009248268E676A37D075329ED769BF7BE18D
-:104D20001FD711D27F89DA62A3F3F4D92517A0A186
-:104D30001F85B51590A0B4DA0019CF3A443D64231D
-:104D400085F4BB3DEFD9DA68B974E77BF8DE02750C
-:104D50005A26C7AB13070C27E4FEE0305F5A3E7CAF
-:104D6000373BCDE2C57AAB924A48C3347F9A653867
-:104D7000803FACB16520212F92BA21127D6FAF2FF9
-:104D8000683D7223F015FDEB0FEF0B5AB54278CF5B
-:104D9000EB8484089DC78B715D75CD9E46EB9EAEFE
-:104DA0007A00EA4D80FCEB61BC82D67ADAFEB0EA8A
-:104DB000BB5B1D45C8B4E72C444A21647CA723286B
-:104DC000011FB4F521241D9AD5C5015DBAF119C59D
-:104DD0002F498D7CD7233FF2EF289C153BE9FCA798
-:104DE000F967FB268E20648CC4F04A5C6D23A63BD9
-:104DF000018EAA256A6AA4DDB4E7CECB1E0ADF12B3
-:104E0000CA53D03EB1C2754B1E852F710BC5960A91
-:104E1000DFFB1F00B8B357F82DC01EE349DB831238
-:104E2000A527F93405E111E334EC97917F1B1EB3FC
-:104E3000045723FFAA926FA89E7E6D26FA8519FD5E
-:104E4000F61E43FAD5341F63F4DBBBF500D0BFA6D2
-:104E50005972C5A8301FEF2ECA44E4F1E0049F3216
-:104E600088D23526DC0074B59212DFE47CC4EB6393
-:104E7000309F6E78E5F0F586D7174F6D7BB2887E50
-:104E80001AE8B078B349045FE2BB1DAA0DBF2BF24C
-:104E9000F89F023CD46E6A6B88A570BD76EAFD046B
-:104EA0003F8537BBE37CA888C29B3D0EC5B86BDC51
-:104EB000173BB61DB0D17FBE087C4C5FE410FF6A83
-:104EC00097E36AF860FCDD858F3DC7103F16A8D3D5
-:104ED000E7BB6D6401D0B574AFA40581BF63C8FDA5
-:104EE0003E5A6E5729A351B8F6A9322F2546C70E50
-:104EF0008FA2D2F6A5B75BB4202D137919997F3D07
-:104F0000FF5E61FCC5F121E829F88890C6F8699434
-:104F10008E79B9FEDD46BE792ADE43DF8F6F3FFE14
-:104F200020B144DA6D5F497C73AD91EF28FFFCCC72
-:104F3000D0AEECE1387F61E47BE04BE013337D6879
-:104F4000BB109397A7E2611EFBDACFCB80EF6BA576
-:104F5000ABF979EB4ABF6FA2B567F9F195C83EC0CE
-:104F6000ABF9F9518E5FAA1902ED79A0B5259248E7
-:104F700051DD2FDD7F14E05B6A6F4BB89DD2B7A681
-:104F8000E4820DF0B03AFEEC0DFE28FDF40447EB90
-:104F9000A55C878FCEEF60670CE2BB5B3BA0271D53
-:104FA000E7DD95337D1329833E119750C4952DDAA3
-:104FB000B3895CEF4ECC5A349929AD2EBB275D895D
-:104FC000216810146A47CAE00985AF62EC2E05EC2F
-:104FD0006719D1D94B37F6BB8D0C037A580D766D16
-:104FE00052D62DA7C1BEB42A6D6B1229EA5BD32419
-:104FF000B43F375F6A6C01DB75739AD560E72A5559
-:10500000637D126176528C334DA374E7EF2FE0FF7E
-:1050100007717E53558A5ADAFFD4ACB860804EF9D6
-:10502000D6B177F926EAECC57B97E5FB7D85DDF106
-:1050300033D92DF0E343BCFE3E96E26718CC73767D
-:105040003D43D3D5F161C6A3192F133F9D3F99145A
-:1050500075C7CBB5CEBF0BAF84FC04E6374993C907
-:105060003A7704AF66FCD0BF29F0DD7B25F43B091D
-:10507000FC820EC542EB95D74944F805657D7574F1
-:10508000E7F099F16AC69FF03726F176EF00BE2867
-:105090003F4D92B738801F2A7FD43A3199EAB1CA7E
-:1050A000418CBE2444914BF17213419C015EB721A7
-:1050B000DFB9ACE86750BBCEF8E3D3F2D3121D7F63
-:1050C00072277D47E12C57A5201511C0CB71135EC7
-:1050D0008E9BF8E2B87EDE66787F0FFFB82E0ABF9F
-:1050E000288D7920F713DCD43F01FF2183A857A82E
-:1050F0003D1AFDC9C844A61FA2DBC9F19DBEAE7E04
-:10510000183E1A916F24E2EF7AEEA2FD84346B0A06
-:105110004503996077A19C4C20DA9A763BA04246E1
-:1051200038055C97D37CB7BB69FB1252B9A65D8F7B
-:10513000E74F853D67F89EC0F13781040EC80950DE
-:105140002ADFE8E72DFABB57CC6730190CFED08771
-:10515000AACAF432EF4FCC2F399984240A6058B28E
-:1051600007B749003F09D8FA44C6B372FA9ECE9AEF
-:105170005EED46BD5E47005FE0B6003D4BF9FB5279
-:10518000BB2304F010BBB5A38B2EE0C390592EF0C7
-:10519000FB285EC895F8087C0FBB25E5645E04BE5D
-:1051A0003347EC0199F2F5C474FF0F000F1DD23B99
-:1051B00045802FEA97E5803E37BFBFF0714B0DBCAD
-:1051C000A7DFCDC7EFF8BC1683D34DF926BC3F2629
-:1051D000B8CD1D4D9FAF62FAD74E3D519D9C96C6EE
-:1051E00031399F447C0AF8970763999CB5C42E44D3
-:1051F00079282775F543697F7F8CBBF908C8592545
-:1052000009E077652E231FF6C6A7B790F07DE0F77B
-:105210004ECAB39AFCE800D2E7606C6E16D8B3832E
-:10522000B14C2F0BFFE165B7EF5937BECF08825E57
-:105230003EAE8D7A17EC4455C9888F46D2D262F7BC
-:10524000D9809EF380BF285EC7027FD1B607A1EB4D
-:1052500074E4AF20B49FB3D6C45FF664ECDF47D5E7
-:1052600018C055AA59BFD5FBD55D78E376B2377F14
-:1052700091B428248FE2752EE7D383B13101F0E396
-:105280004A9FA0724CF13787F89F6F94000EABC114
-:105290007F9F1B6B457F6FEECF6351DE69E32D75FA
-:1052A00074C8F9F4F93ADA0FC95307EAED3A69D448
-:1052B000B507FADB55E4C7B92EF6AC9DF691DE07CB
-:1052C000FAA5DA8DE2936CB69ED7F3A579FC1EFBA6
-:1052D00035B53B28919960570F5AD5815E9DFD7871
-:1052E000D36DC1F99FB7676FB1787AC6D37C7BB2B3
-:1052F000A68C88D44FC6C6CE8CE62788FE045EBB3B
-:10530000D617E49BC6967191F5C563ABBF6E3D326F
-:1053100048BFBEF8BA55737CFFF5C5A9AD5FE3FA87
-:10532000E2690BF50F016F8A2F7F9ACE2FFADACD43
-:10533000FC976096F635C8E1D3DC8FA41C943F6DD2
-:1053400068F7EFFA2E9F404E50168BB193406C31A8
-:10535000D5030A09588BE17BFF2A0BA5B73293A02E
-:105360005DA27A08FD4F331E4E6795FE03F856C8BE
-:1053700067691CE57F2A8F4F58D4A646F0B3DF96A5
-:10538000A9CF4A475F3E07FDBFDB962FC4F2DCF191
-:105390004B39A0174A39BE150FB3EBB5F14CAE6AC5
-:1053A000E3991CFD31CDAF78E8F3564D768EA4FD20
-:1053B0002DDE2B7B63102DE10CE0B7DBA6C8A9F036
-:1053C000FC84DD8AEBC7834E46FF1344AA00FC949D
-:1053D000BE17E3DB43CB47D34A723D3A3FF1D1B42A
-:1053E00089582715D4E1A37CB9CCCEE4E10471330C
-:1053F000B8D74ADEEDF4D1F9B5EE44E0CF8356627A
-:10540000F047D23D0AC29BEE6178ACEAA4C2398271
-:10541000F15D1D1DBF4A516DE0FF5775DAF039C0CF
-:10542000817C196BECC7E361FEB8C7C3F8A9AA5326
-:10543000C220C1C158733F0A7BCEF9DB4C87A7DC81
-:105440001372603E8FA669B91EF45F5505F0533A9A
-:10545000B2E563D087BDEBFF8004FABFF692141A61
-:105460004CE7DFB1C78AEBBA0EBE2E38B3E750DF88
-:105470002A5A2EDDF54102AC1FC7727A9D515A138C
-:1054800000BE25AF527FBA10D9B9EF3DD87ECEE825
-:10549000756C18BBDE2E5E7F3973A00FBFA3008E24
-:1054A0008EF86513EC8120C07770953C13E846EDCB
-:1054B000A6F0CB24D093657B642DB6A8BBBF36D5B0
-:1054C00063E5FE3AA3E3432E364E4FF25DDA194F01
-:1054D000823AF92E555405E02FED4CC0E7674E6D2A
-:1054E000DB3895F27D20CD8AEB436A855AD05F94F4
-:1054F000085FF0D13A9D4F0B9FCFE13DB7DD7E03B2
-:10550000FDE79B607FE83713DBFC294CD8E9EA6EA6
-:1055100074C4FF2A7319FD44B31F29EC5945F3865F
-:10552000FA0104F01EBCED06E0C3530A013EECE6AE
-:1055300067DB6FEEC19FDC807CF4DA9E5FE13AAA04
-:10554000C8A362BD76CF8572E0E31A129A01FDD638
-:10555000EC915D21FAF561B2A700EC8AB0FB022F55
-:10556000A14B87EC5EB00BB1B26B35CCD37E8743D9
-:10557000A578BAE15C610ADA3FBBB502F462696CF6
-:10558000B6638E8E9F0FA6C815C0078753328DCF86
-:10559000ED1B0BC0FEEDB3307DD472F26E471B7E67
-:1055A000775B0AFA71C2EE9BFC561127ABCC96834F
-:1055B000D1FC61226FD9144BDF4FCAB51219FCF729
-:1055C000B645E80F74B3FB97FCB83E30DB7F8177BC
-:1055D0008A6994976E7E6B04CF06FFF5690F8F97EB
-:1055E000A96428F8A3A14B1B17039CE79AE35DABC2
-:1055F000311EC1FC9D73ED8B364E81E7EFC8185FFD
-:1056000039774946793AF8C6E2C16D3A39A61604A7
-:10561000E97471F8D7675FA7F4B9F8799C3780FC13
-:10562000B7B320DA7A59ACA3E8C8FD2D69087F7FAB
-:10563000CB5814375CB7DE1459B7FEDA83EBD6705B
-:10564000399893B42DC76CC01767A80B0FF00628C4
-:10565000F1B753BCDEA4B5C92E1D3CFF97CB7791A3
-:1056600047DB057A25404A0750A7852C88D34A6E28
-:10567000007F741A716DA3F3D97FAA54B2D2FAB81D
-:10568000ED6EAF44EBBBC12105BE7D550E6EA77814
-:10569000D84DF5F16EDAEFC2D6469B9B8E1BD843F0
-:1056A000811A43EB9490808753D64046928E4F16D2
-:1056B00065B2714F59FDBF847E4E7D1243607D7887
-:1056C000EAF3B8A876B83893E9CDD7B99D7364AA40
-:1056D000D83ED4F1DA9BFD295CA14ED770C0FBA265
-:1056E00097BE9667D3716EE4FEDAE44DADF510D740
-:1056F00099BA25AC80FEF1055D656082A7BFE4B56F
-:10570000825DBA7D87CF0AEEF98C3D7556783F737E
-:105710006FE361A8DF1DDA89755BA6FF23C0EB4D3F
-:105720006BC387805DB21A89027241BE617E589850
-:10573000CB9DA7D37B3011B9BAC4027CDE35FE8A7B
-:1057400056055CA2A9F56C7CDA5F1BF657179E0024
-:10575000F62D6339EB2F831C5895A846FA1D7FA9B7
-:1057600055D2C71B4A7FB804F9E8F947970C4E0693
-:10577000BCFF358664BBB96CA4C0F38141587F126D
-:10578000A52D7FBADE3F23A118C637C4CE4AC14F2C
-:105790009A9DF1912B0EFC85479EA98B03FD90E20B
-:1057A000536D7E1D9D4A374E1EF216F0696C0CC675
-:1057B000ED2E0E677EFDC50D8E6080C5BB8700DFB8
-:1057C0000A7B5505F436C4A384BC33BEA75D04012F
-:1057D0000E511269B58BE8EB24940670757A187D2A
-:1057E0009B6CEA2C18AF292EC605E355D9B36DA0E2
-:1057F0009FBAE29F1044A47AE206EE6FEE3F753046
-:1058000019E87A71F8AA0C5817842CFF8EFAA83779
-:10581000BE5AE2D1923211CE4006ACABC4F7FB4E79
-:10582000C615823D7C5DF861DED98361BEA25D5103
-:1058300026F30BA83CE0FC851CA4B4126D6B21A2DE
-:105840004ADBADC3477E268BE38972B7550D3039ED
-:10585000A27E08C8953364CF0479DD9789F5141FBB
-:105860007178E9FBDABDD95E594539CFCF4C8DC887
-:10587000FF8D5CFE535AC32877D7BA3E706532BE9F
-:105880000D293BB9FC10D443203F4C4F870630FE16
-:10589000080C00BA805EE0F449976859CDE92CE61F
-:1058A0009DC2E57E2A976BC003BCAFE4F314EF6F93
-:1058B000E6F82A930B13DBA2C47DBAF86E793A019D
-:1058C0007FB16CF9002C2B39BC0BED1B309EBA302C
-:1058D0006503C65153B4462C174E6CC4E7695B662A
-:1058E000237F2CDC2C19E2A2A27C81FB5F674E593E
-:1058F000D07E114B5C7FE03FF1FED7E067B0B8F09F
-:105900001D80E7D37B363E53A446E2C2A79B983D59
-:105910005C1067F4EFEEE6F3DAFFCDC164E0978B3D
-:10592000B18D53EF0639D92EBB56011D9BCA2435C4
-:105930000AFFE9F10C78AD6DFA4739CCA386B4358E
-:10594000809E3ECDFD32B559427DAAEEA5653F2A27
-:105950002C4D4CBF9EB232FD7E4A4A96403E40BF1F
-:10596000839E3DF5F9BA8C47818F2427FA37A037FB
-:1059700077E9F863F18EAD0DFDE93F6FBAE41A0ED9
-:105980007C15528843AF9F059F087D6B867B05A7DA
-:10599000ABE0C31B22766805E00DE2A740B29A0D8A
-:1059A000E7317EBA81D3AF09F80DE479ADE0B7E114
-:1059B00016D4A726391EF32FD2DFFB9EFA4506C662
-:1059C00025C652B9A5727D1AE43A0A5FFC9CD36FD2
-:1059D00089C7BF29338ABE3F2DF97F999C1969BFBA
-:1059E000EFE42D43AA74FD3CC8F171D1EA1FEC8AA3
-:1059F00082AF085E497FA0F3024A19C003D922B9D9
-:105A0000C0EF13EF53B6B07D8097B91C89E7A22E83
-:105A1000F03D1EF09D89F87E3993D97D1B98E4B442
-:105A200020B3FBC4724B7FB0E30BE3B45B300EB327
-:105A3000C14220AE44A452E4F794A6A74F5E1E09CB
-:105A400065AC07F755A85F0DFBA50B9F50711DB8FE
-:105A5000FA8558E4B350A607E7B5BAC98AFC76DAE6
-:105A6000DA98817CF9F9A2C1B02F13F884D9A19EEC
-:105A7000F029F8E727DC5E0BBEF3AC677CD7A4689F
-:105A800071C077C28E0AFE3CBDFDE6629037D13E02
-:105A9000C237AEE1826F66D3E79EB56D32D087D252
-:105AA000ED8F8087CCF561D45F3DD14DECB709FA1D
-:105AB00009BD9E906531E0FB330E7F0AF75FBAD3D4
-:105AC0007195811E3746F8FF5333FF5BD5883CFD47
-:105AD000A11739B83ECBC5E20C9FCD4903FD22F694
-:105AE0006BC43EAA18FF2CE7879EF65B0EABFE3315
-:105AF00099BAF9C07EA08A7A9DEDAF94717F7BD967
-:105B0000F698600CA5DF3E7805FAA23D2E087EA22D
-:105B10006897AB104D2926E4BF33DD385E2EA80A06
-:105B20005A4F596E235974DC8BD71D6849A0DF4F3B
-:105B300009B74D1E46A7B6CFD676FBAD10F725DACE
-:105B400022F02730560F7CDEC1FA25AE9D0638AD17
-:105B50005916C33EA898774F76AB277A5C9FC5F756
-:105B6000C7F87BB39C1FE3F83AC4CBDEE53490085A
-:105B7000727A1309AC82FD117289B8C01E77C9E927
-:105B80002582F6657096514E453D8A9C0ECED2CB4D
-:105B900069671B93532E8F894D562D9A7F32348B14
-:105BA000AD7B139BCA4AC09E24FA08C63FE8345115
-:105BB000AE1752B906790D807CF6037C32FEF2688E
-:105BC0008DF7C17B4F13F3AB2F26B1F92EBC513BA0
-:105BD00020839C53BF5EA29F3672B9EE19EFA14499
-:105BE00089D9A744D027378D6B9B00F656857D81D8
-:105BF0007E303F46DFF1E3483044E9AE5E224C4F51
-:105C00007CFE8BFB1E05FDB0C1E1CD5623F627ECD3
-:105C1000F197001E7A9267CA971AC4A396FD9783DC
-:105C2000AD037BD81F1FBF5C46FEA37C7E4B960E48
-:105C3000FFE37D6119F09A1CEF4FB32611724FD329
-:105C4000D0E9F641747E6EEADFD2FA4C5A5F0F71EA
-:105C5000B73E6D84D79F72A47FFF38DD3D5985EF35
-:105C6000D753B80399DA5D59A9B86F7D0FC073D3C4
-:105C700080B00CFEE7B5EEEFD7427C8ECEE7F81D84
-:105C8000435E984D9F56DDE56B80B7228E3C86C7FC
-:105C9000916B9B87637C59174F5E94759578726FF3
-:105CA000E32670B9A7FC8DEBB884B16119F4A2D0DA
-:105CB0002BCBB3FA707E6E23B0AE10F2057A09FCDE
-:105CC0005A916700714527EE5704F17BA8271647C4
-:105CD000F4CDFA464B4534FE7E3CCB11558F92E60F
-:105CE000FFFE8F4747D3F9C22BA6571FCFD2E9D566
-:105CF000A6C6E37D999F4AAD3CF51B1EE46BF98D6A
-:105D0000ABBD7FCE02BE7B57C678CA7531B6800464
-:105D1000EB7E8DA8AEBEBC3F10BB6629E42CA2F57D
-:105D20006F25A2419CF25B19CB8D3FF655B8216ED1
-:105D3000F2B1C5BB9A60BE02E267EC6012B4D37FD9
-:105D4000EEE5F1CF92130E0DF200CE4976D49FE727
-:105D50008EC505C07E9E735A306EDEB23F06E5E208
-:105D600042561C8F67040D710FB19F73E19D39C9B5
-:105D7000A0F79FE1FB9BCFC4B2B8EA3377E5603C64
-:105D800052C46D1585E2BE0F84A9285EFB807F3C5E
-:105D900000E3A9228EDBD73E5B6249456C1CC5CE71
-:105DA000E6D757F14B101FDFDA4B3EC4EB59361ED6
-:105DB00007F0EF01FEAD5DD1668375ABF07B855DCD
-:105DC0001EDCE139007911832B58986C6B87C50272
-:105DD000F3DC4AD929C9DD9DBF041F6DED9E7770A4
-:105DE000204B17A79DF618CB3BE8AAF376BFE479C2
-:105DF00007E3DB8FBF02FE1C95F75D867665A97110
-:105E0000FE287A6BC6F21F62FB9EF87F8685F8A398
-:105E1000D99113427F2B7503C04E91BF3F12AF46FD
-:105E200089CBCCF8AC2A15F0628EA745C6FF318E1F
-:105E3000FF59168F1F65900CD85FEB6D3FD30CF7A1
-:105E40004756FFA068764AD0D93C5EF7F66C1DD65F
-:105E5000F59D8DF8773958BFC5BA7E53B299BF33D7
-:105E60004362FBF5E432417B2DF884E2FD3F812F54
-:105E700046FFE9C48838DCE709CBA00F2E7C9C35AF
-:105E800010F7DB7B58770A7808F16747CBEBA0E384
-:105E9000F9A2D121299BD1618695ED4748776563A9
-:105EA0001C60466C8C14A3F34F2E77D95BCDB02FBA
-:105EB0007B3076CC488C5F5AD581D1F067DEAFBDA0
-:105EC0009C45905F012FDE28FC24F695059E1B4A19
-:105ED000B41285C5C7C83630811AD3A3291504F773
-:105EE000D7C6481AE223339BF94D5B79BEDC857730
-:105EF00064D40BA34BD4206C91527BE1CE1E85F968
-:105F000057AF5874F957824F1A7E43EDB2217EC8BD
-:105F1000E44AAC9F93B83EA65EA3B64BF79DBA0287
-:105F20007440C41E0CACB71BEA190FB988A2B31792
-:105F3000495A9AA13ED0E78A8375D3C00AD5D04E7C
-:105F4000F09DC8FFC3BF1498B70BE34F7D383C6387
-:105F5000243FF20DE837880F97707AD2F98EC7F98F
-:105F600056B45DD0F38D986F6FF33ABE92C243156D
-:105F700058FB4A0A2FD50B73D6BB57A521DE5D040B
-:105F8000D6132757DAF1F93CDE3E69D3EC86743A32
-:105F90004452BD8A71D924ADEECD74C8B7ACA37597
-:105FA000FA37B7519260BD4EF50CB67B6EA50B4B20
-:105FB000416F177D2F817D2F2579B04FD3931DF32E
-:105FC000673B0CEBE1ABD8317FF6A8EE76CC62F7FD
-:105FD000BE05FBFF4B9B6515F862CDE43E1AF0D37E
-:105FE000C69D9217E26E879A591EDEC619CC9E880E
-:105FF00071CFBE9A8876E3ACC4E49CB424A11CD4CF
-:106000002671DAD427E17EEC39BEAE5E91E5AFCBE6
-:10601000D6E9CF8DCDA362715FD66497E89F4BA27E
-:10602000ED700F4E02FF69F85A2513F5C072809F7C
-:10603000CC6F1B119B097CEBFF609C047AE09B0CEE
-:10604000A0A7795F4FECFF897DC13FA6F95765EBAB
-:10605000F456F7FD3EE33E959C60C73CDEB132CB83
-:10606000E3D5D95F02745D037E22E5BB35C7E2103C
-:106070003F6B2E33F9A370FE04C669718E467E1203
-:106080007696C259F42EE90E67AD258CF1421D9C1F
-:10609000CF5C1D4E539E2B87AB0BFF7C7F4A762A2D
-:1060A00008FF3912E70538F7DABC1FFBC10E9F8DD8
-:1060B000C3F89EA04F0D97B173941E1285F3DCDEDA
-:1060C00011B11607F847FE17805EF2A07002F8E7DC
-:1060D000879A47E4C37C7ADAA73D9255FA7236CAAA
-:1060E00099FF37D06EBCABEDC26FD5C8FCAFB2BF65
-:1060F000BB0BDA7D07FCBCA6E7A3DEF053AB38D6BA
-:106100004A2C408E7E98C4F5B499EFA4E603FF05AF
-:10611000794754DE30EF339041826B28DE1A8632A5
-:10612000FE2373898A76D9C4272BB27C6F03FC4285
-:106130004EAF829F7701EEDA2C5F2B7C0F700C281C
-:1061400046BDF47E36B36FAFD82CD89EE5AF241190
-:10615000CCC731EF9F9FCEAAFA04DB0BFF2BCF2FCA
-:10616000B90ABF931C1CBF3A7F85902F96723C2DB5
-:10617000857D5DC857DB63ED30E44598F0F0789697
-:10618000AF83E181F2D948C6676BC855F11186EF3C
-:106190006BB3FC17002F4E2BE51740CAD8D9698086
-:1061A000E7C3AAF635ECFBEF5EC5F071EE4F0C1FAE
-:1061B000FBDA2DC8D74F93212897C596F3F741FFF7
-:1061C00054BF5C867EC685774AB06EEEB740B58018
-:1061D0005E1E10F6CA96ABF3AD9483EB27BF022583
-:1061E000A5C383408711EFB078CE55F8D60EDF7F78
-:1061F00007BC27E57C07FD43F92A15FA177C75AD26
-:10620000F956942FC8803EDDFBA3EB28DC5F38B045
-:106210002F06F555CD6E09F579CD1B5FE07ABDE609
-:10622000B51864CA89AFC5E2FBF37BD8FBB325D1AF
-:10623000F3013272FAA0DD59BAF3019FD14E07F093
-:10624000F9CFB4F3AE2C39B2BF9A3C859D435813B5
-:106250002BF24DD93E6B02E7B3E4413E0DEC507298
-:1062600019C17CC10407CB43EC7EDE80C96D2A6F67
-:10627000E772A912E0D97CFE408E63F985A964FD1E
-:10628000D780A7E40AE3FB544705EEBBA69ACE29C4
-:10629000087C97E570FFD946D2408FEC34E55588ED
-:1062A000F2FD1CEE07D627E17A50E170B5386DC8D3
-:1062B000B7CB9C769CF7B224923C19EB0ADA7F7339
-:1062C0003F5DFEA76621AAFE1C45451C5175FE5187
-:1062D000AAAF8FA1DE6F667FC3F7E97E8FE1FD80F5
-:1062E00005430CEF07D5151BEA83975F6FF8DE4D6A
-:1062F00011A0AF67AEBDC5F07D76E374433D77F383
-:10630000DD86EFF3835586F7052F2D32BC1FBA7358
-:1063100099A13E6CEFA386EFE51EFCF26773589CD3
-:106320004D167EB973A41FF84A76DAA518DDFA6F08
-:1063300019A7474942451AEC5BD63BCBD3607DDABF
-:106340009244EDF155E26EDF77DDD628E8CFFDAF60
-:10635000521E773B7B906A11CA7F3587281F0C43FA
-:10636000FFAB3187FB5FB355F83E6C437BA278717E
-:106370001E3312EC184F33F7BF2C478DBADE922D27
-:106380005ED764A9677C09BEEC0D5F9B395EFFB7E1
-:10639000F8FAC8943724D67BE6767FCEB1707FDCDE
-:1063A000BF3B47BFAE2361D987EBBA6FCE0608E883
-:1063B00051827E4D6DBC0BE312663F408CFFC734AB
-:1063C000DFEBD08F599FFA96CF67DF59E80243EE93
-:1063D00079BDF7E71CF37AAF6C26D223C966C0D328
-:1063E000FE2E3A6B86F55E7DD2685CEFD55BB5B468
-:1063F0006B59EFEDCF2188EFCD40D7541D3D6D5E39
-:10640000D5857ADEE8BF74F7CFA9FDA3F3DC087E5B
-:106410009D047E5932F3D7774B386F31EEF7F0CFCA
-:10642000DBF5F6A927FF3C8678D72A32D2EF4BB0AE
-:106430004FD41F7F3056FE5EFEF885EF620FDFB748
-:106440007A318FFDFD29325945F178A1624C3F1216
-:10645000451F8BF2288FDFECCE2548B7DEE21FEF19
-:10646000AF5C70D5F31CEF57B23CCDE9C047BA71B1
-:10647000D373195F8CC8E5FB92312C8E71E63F9C7B
-:1064800078EEE0CC2D1F261027E4B78D1819803C3C
-:1064900066E27D08F26F020E27C609A7578E1AB969
-:1064A000CAA9E3ABB10CCF137EFFA70488FF4CDF72
-:1064B00095991A70F4CC4F23F8FC88D2968379D939
-:1064C000AF9FEEABD272FABEEC5416A734E6AD998C
-:1064D000E346D397D718E47869A74482C9BABAD2F9
-:1064E0008AF9814B3B157C7E39C71857EA115FD773
-:1064F000884FF37381CFF72B4F67403CFD6C6C7472
-:10650000FFE37E8EEF2EFE319D83E9E97C4739EF74
-:10651000FF42C575FD40CF4DB7A9D9D712E7127814
-:106520006ABDF4453CE88937E07C4D94FEC7E7B28C
-:106530007DA537B4CFE1F80329B1872700DF97F0B5
-:10654000787A94BCFFDB7261BDD459F12FC9FB9FEF
-:1065500095CBE9C3F3EAF372D5A879FFBD9D5F9AA5
-:10656000668B6EEFC646F0F721C8EB83CF595D000E
-:106570005735F84E10BFDB6AC5F8DD07976208ECA7
-:10658000A77CB1C5FA2BC8575BF05CE6739B687DAE
-:1065900041650CEEFF546FB5B2FDB9CAD82084AA8C
-:1065A000166C7DB8EF1C3ADE57546E9764D3F7CF64
-:1065B0003D8DF9331FB4AFC3FCEDD320CFF4F98286
-:1065C000CB8FCF00FCEFB335160CA7E5921D92E1FF
-:1065D0001CC6A2A658435DE4030AFA1129723E4381
-:1065E000A5F6A421D7781E6B4464DFAC2197D96B44
-:1065F000CCB3AF99C2CE631D3AC9D6FB87B358BEA0
-:1066000060A8F2CEC9C3E93C2A53AD182F31E71771
-:1066100012824427F379FE6FE5270A9EBBAD1CEA80
-:10662000443FF0CD95754807DACE51A63B8F50F91F
-:10663000731677A974B3BCF91EF30E4DF986E27C8C
-:1066400050B73CC3C8F9A0E3D1F8E657B946B93E04
-:106650007492E515CE7F4766F3EA456F1EE5F3F8C1
-:10666000A07DC8BDBFA5F8F8A08269F10F2EDDFCA2
-:1066700018C4BDBEF04904F23CBFB814FD5CDA3F5B
-:10668000BAECABBFEBDC0ED0E7B68A855D7510CBFC
-:106690003B7C0F18CEF55CBBBEB9BA3EA9CE65E710
-:1066A00032CDFADDCCF7FFBFF4FBF4CAC3190127E2
-:1066B000962F40D9B18BE947B39C9BF5B980CB0CA1
-:1066C000EFD24ED990873C16F4C028BD3EB7E17B8F
-:1066D000EAEEE37C02A395E01A09FD80CF81EF4743
-:1066E0003A82C92574887AD7B6F8ABC56FE8FAF94B
-:1066F000347C5FE3F6774099FCC7FEA560EF47BCAA
-:10670000B313F308CFF5904FFEA1DB94BF2619F722
-:106710000BBECD2DF910D6FFEB54560AF91C498556
-:1067200090E73B7C9BCBF6E57E0AFB96356F5D449C
-:10673000F97CDAE64F83F840A0BFCDBB3D4A7E88A6
-:1067400092F7DDCE25EC80F83CD03D2FCFB0DF07AF
-:106750007122CC5B381E8771A2E7D3B4B83CFADD56
-:106760002B695A7C1EE8F334CD91A7B34FF57C9E7C
-:106770008A25BA5F5C9627F8DF87767C5E29D5BFCD
-:1067800051F8D09BC7F2F94B9EB92B03E2719F1FC2
-:10679000BB3B03F463CBD363AE9AD7F633904FAAD7
-:1067A0003F9F04BD9F1DD94FFD09971B11EF9E67A9
-:1067B000F3E5E8F3B192F392D87EED75BB5B3D94BF
-:1067C0004FDAD7CBA8BFDB1D2C8FED8443A9682AF5
-:1067D00064ED520CEDD8F90519F89ECAB1E250BE2D
-:1067E000D5EBA332E0E9D49EE759C6E964235E3BCA
-:1067F000B4B71DBFC50E76549634178BFF337EB8E1
-:106800008E8E00FCF038D76397D3FCE301EF366E31
-:106810006FAFE3F6567198ECEBC0ABEF8FEF4DD353
-:1068200026423F77A7696540D7BDB64001C8CDDE97
-:10683000B8E8796993F2983F129BC7F98538D07F01
-:10684000C5F164DCA79F9AC7F6E97D50DE3420BC11
-:1068500006F2C93F74BBBAF6B97D789EDE7707BCF5
-:1068600027696DE456C893A3C0C23987D74F1D2747
-:10687000A0BF12C2ED04F269124CF9AEA2FC2A8F3D
-:10688000F91FAFF17DCFEE72C7F8CCCFE16CA2F269
-:1068900002E74185BCC0FE3AE44BAC53FD5CEE58C8
-:1068A000BE47D3537D24D867F168AA05F803F24C9C
-:1068B000413F99F3839AF3981E053994AE22870FCE
-:1068C0007F47396C7A6AB22516E07C94605E075582
-:1068D0007EABEDB4FEFC329717CE8765AE27B80EBF
-:1068E0001AB43C6E1BAC93025C9E066F22AB63E94C
-:1068F000D76E9EC727F2A2DDF56D0A9E177894E544
-:10690000E99DFEFC16D909FD7F2DFA37E6058A3C84
-:10691000BE468E5F318F251EFF93C01FE6BCEA9EE8
-:10692000F3BFBECC873C87E784BCF33C9C713C0F33
-:10693000675CD3D3188F1BD774B322D14F9E5742B5
-:1069400012ACF79EAFD314B037BFCB637939BDE536
-:10695000C1BDCCF9B191D3B9A77CCA17F87751F270
-:10696000295FC84BD5E593FD80E5533E9EA7E2F72E
-:10697000CFF33C9AE7EB58BC6ED14BEF49FABC39E8
-:10698000F19DC8BB1BF810CBBB7B5E698B05FEB9C4
-:1069900018CBE875F10771C15518946F1B1EFD1CCB
-:1069A00082398F9CE58F0F0E874B301F8810BC07F4
-:1069B0006148BE6AA0CBD6B02B0EE4A5377BF0268B
-:1069C000A7E7B5F2E18BF90C9F51ECE63B80AFEF06
-:1069D00060375BF398DDFC20EFFBD84D6E2F85FD13
-:1069E00014EF8F717A56E751BBA9F36B7576F358A4
-:1069F0005E14BB99428298A7413A2C5E7D5EA8281E
-:106A0000FDBCDFB73DDA17D07E1C8FA724741C278E
-:106A1000924E0F4DE7722DEE9778B10FB97F5A94D1
-:106A2000794CE1FD596685F13E8A8466296A1EDA51
-:106A3000876EA64FA85EFC4F94B3C1546F4ADDF534
-:106A400066147AFC13BE1FF08E760898E4FAA4A6AA
-:106A500078709FAE420F4B7E2AD04393A114F82F3B
-:106A6000BE625C470AFCC7E533F9ED9BADC5E6D3D2
-:106A7000F22F5CCE7AA24B7A3EF36386F052E4A901
-:106A8000EF36F9A313F2195E6ECE37C61575F44BC7
-:106A9000CF8F423FA187DFF6F806023CAF9DDA1D9B
-:106AA0000F7C24E824F48F995E11395B25F6C9B375
-:106AB000F3A3D81FD1DE6C8722ED0308F756E0A3BD
-:106AC000912CDF07CF11F0F308023EC1E71A9FE7D0
-:106AD0005F3DDA7080D70CA7ABC3225D0DCEA470EA
-:106AE0008A04F29FA4B9B07CFD944502B85C6105AC
-:106AF000F3DD5DDC3E9AED2055171CAFAC9F17B956
-:106B0000DE6838C3F2101B4AFC6910FFCFC9D626D5
-:106B1000025CD5795A1994D7656BE5507EE8667E9C
-:106B20004B7ABE560175912F6086D397DF957770AB
-:106B30002BE033612209803D84FB64609F2581E75F
-:106B4000312468AE52B063095B08E60924C7870F99
-:106B5000C4C0FEDFD3C40BE79F7202AA05D65F99BB
-:106B60000F69ABA16C38C3EFC52921787EB22B8F9A
-:106B7000AEDE837974206F7A7EADE278AECA677A32
-:106B80008EFA21F7E733B866E7EBFC1021473DF9B1
-:106B9000153A395C80EDAE5D0E6BF3BF9B1C3EC8B1
-:106BA000E5F0A16B91C31F46E4F051F8BE37395CA4
-:106BB000C7E5EFC55EE4F0FFF07E7F97DFA31E5DC3
-:106BC000174D0E459EB0E0779043B0F741DE1FD5DC
-:106BD0009F3FCB4FFD5E72B9399A5C9AE5B1ABBF6E
-:106BE0006BE4FF9EFCBF0143FC7CDED1FDBF1D3C7E
-:106BF0005F5CC833959797B9BCFC9ACBCB0E80F7F6
-:106C000043B78AE398E5ABCBDE84999E80FC3C7D5C
-:106C10009ED6E108BE5E857ECC7939E34CF1FCCF8F
-:106C2000F2193FBCC3CB84F071027A81E2ED8D7C16
-:106C30009DDD7891CB4B602CCB3BA5925A0A7EE52B
-:106C4000BE0EEA470238F90CDE719B5B0F81DF480C
-:106C500094C678B8E7AA273C7986A8625F202A9E66
-:106C6000E8F87F86F1CD746B06BA39BAFBF3667A21
-:106C70003573B90D737C7C5F3804FE008E61088724
-:106C80006A59A7B3F39F733D41E16D0778C74F0C75
-:106C9000CB04E10AC5C3FE89D0A764206D3FB27B57
-:106CA000FB8E48FB0EA0D7788DB62F8CB44F825048
-:106CB0007E26E831AACFD04FD6F0BC62839BF18309
-:106CC00099EF9B6CEC7C4417BD1AFB23BDE6AAFE32
-:106CD0006FA1FF26859D1B695AEB92D8794096EFEC
-:106CE0007B225343BE8DA287C890EFA68794214C88
-:106CF0000F59875C831E720CE9D243F1F07D38F79F
-:106D0000EA7A6800FF7EE090ABEBA10CFE9D67483D
-:106D10008FFEC0009897590FAD53191EA2C8E960A5
-:106D200080EFDB5C4D8592CAA97B486AC4AED17600
-:106D300099509FCBDBAF6F64F9160112E78DB6CE89
-:106D4000F00E715C6BFE9997C3F99DF2A837FEB8FF
-:106D5000CD06F816794E625C73FEB4A0634DF3AABB
-:106D6000116428E4695DCA00BFF2DCB16F313E7284
-:106D700024AB4A83F15BF68F31E46589F197F178B2
-:106D80005A995CB813E2B3E78FD830EE2913F5D9DE
-:106D900071149EDA235612443DC5EE1B10FB61D6DA
-:106DA000230DAD108FB712DDBD50B89E5113816F0A
-:106DB000AD47D8FD4C2485BD0F10FB2A76BFA371CB
-:106DC0009F3F4933EEF32757F431EDFB1BF7F9FBF7
-:106DD000CD34EEF3A7FB8DFBFC0316149BF6FD8D63
-:106DE000FBFC8397979AF6FD8DFBFC996BA79BF6AE
-:106DF000FD8DFBFCB99B8DFBFCF941E33E7FF55B10
-:106E0000AFD8605D5DF0D232D3FEBF71BF9F22A4C8
-:106E1000354B775FCCB0BDAB0DDFCF6D63F7900D19
-:106E20000FAD33B66B64F71504E87F80CF2F88DF92
-:106E3000067CA690F09B0320BF25287943F4B385F8
-:106E40007B778D86B298C7C5AB371BEF395818349E
-:106E5000D6BF7ABBE208E481D58210D17E6A5F9208
-:106E6000824177CF745FFC92B1BD88F32EE6F3398F
-:106E7000CF9D82F35B643CB76CE693EAB76E63F731
-:106E80008605B456B8F741E041F08B8BF38B804B0D
-:106E9000E063B1BC04E55CE041DC9F55639A7FB7D9
-:106EA000F9EEDD8AEDCCF336CF63FB90AEFBB0702C
-:106EB0003F8074931307CB13A2F3827D72399067DE
-:106EC0009213231E7AC2DFB5CA8DCAF1109366945D
-:106ED0009B5835CECC77486F333EE3F38CF264C6D3
-:106EE000A7D3DB3F2A7F89FB4F713EB01FB25722E9
-:106EF000BF90BAE37541F386860151F8897A7E988E
-:106F0000E761C6EF7B26FC1E56FD47413F5DF8F862
-:106F10001B19E9EA6F1B01F6EC2AF9671FF3EFAFC3
-:106F200075BFFD187C2FDA9BF7DBCF419EA4EEBC2A
-:106F30008AD44537CD942779E8BF601F89B6F1DB45
-:106F4000200E5BE1B5B3FBC0CCF96BFE736047026A
-:106F5000A51AC138E079E25D43FB5BE3FC8F825EFA
-:106F6000E2221786A0BFEBC7FB85C687DB2EFC1687
-:106F7000BA575A5D304EB47B484DE70F2FC3B8DF88
-:106F8000F79E47E1B7D3759252C0FC6E5B817E9D40
-:106F9000D475BF2A5BEFF4D48FC823EBA9940ECA33
-:106FA0006857C3529C37DA3D65E905467BAF3BE73E
-:106FB000995EA0B3A3350F5F7813F41EC5F7407830
-:106FC000EE7452FF46BA26FF4685EF9F8D4F40BEB6
-:106FD0000EBF250773DD707F959AD8A7B0FB7D4B58
-:106FE00022AFB00EEE534A86E7F98957CBBF28355A
-:106FF000DD7365BE97A8A198C155CCE7E9E7F75DB9
-:1070000095F3BA389726E271B53359BCF969531C28
-:10701000B3BCC0C9DA679596039D1ADC12FA4F0D0E
-:107020009264D84FBA38A4A41CE6ABF1FECB21364B
-:107030009F8AE7EB10AE14D33ADE52C0BEB7149469
-:1070400062092B7AA0B74D96A3E2735201835FF8D1
-:1070500051DFE39E99A33123BBDF3363BE1FB13CF5
-:10706000AFAE05D48379DFF7D5DEEE99395A1E75B8
-:10707000FF17F01BDF27C2F7730B8CF72086E2FCAB
-:107080001BA7403CE24FB217CE9B98E7FD4001F3AF
-:10709000FBD7F3750BEC2BC17AA40F2FBB7FCFF07E
-:1070A00014CCF23D807855285E29BC211BBB0F34DF
-:1070B000FC21C171FA2FD00E407D944FC5F3150D00
-:1070C0006EE280FB82C2C32D181749F1BB26C2BDF8
-:1070D000BE295BA43E804EA117AC0A093829BF34F3
-:1070E00016B891CEEBC99A0370BF49E296AF8907F3
-:1070F000D713AE892ED0477349D438E7937C3ED35B
-:107100009EF328B02E4BB447BFCFE1493E0FAA1FD4
-:10711000D6C13CC6DB8F8D903C11FD024B5BFCBFA2
-:10712000768BE15CB3284F644E68047E1DB580F415
-:1071300010F7647C7A83EA7B06FA1F7554C5FD8AD2
-:107140006AA1A7E75A08DC3B7A17679FBBB6B0FC79
-:107150007572E9CA1559F8DD04FB27B07F50BDC42C
-:107160001984FD84EA6637DEC7471648B8CF51DB7D
-:10717000FC9E0FEAD52347BA50BFC54B12DCCB08A3
-:10718000269FE933859C14FC22F349D1FE6772FBEC
-:1071900020D6F7D41EAC8FA778AFDEB2F5009C8F57
-:1071A000F87FD4F003DD3E96FD1FFF90F67B073598
-:1071B00052CB8BA154C82C8CABA7613FB7F37E0296
-:1071C000DF12E9A43D32EE1DCD6FE17C3EB6928028
-:1071D0009D3293B5940D6D7D3411F75B457ECE0CD9
-:1071E0007B6319D8B973B670119C9F3AB7FF2F8390
-:1071F000601FFEB31F5D70C2BEFCDF95B0139E9F83
-:107200005AF18113EEC5FB6C05BB3FEA3E6E3F04AD
-:10721000BEFFC4F5825AE86B01BADCBFF2F268FD2A
-:107220003D3864792AEAFD854119533A845C2D7E04
-:10723000291E3C9BAEFAD29DC986BAB0074B634863
-:107240005DB438A1A590F1D1C21D5B6D035418DF68
-:10725000FF118C7F0A1289295D4EED71A2DF28E0B3
-:10726000A9DA31DC067EC6DF9B634808D62F4AAB1D
-:10727000959DBFD4264B941FFC9CEE6638DF7C2383
-:107280001EFB9BF734D33FB3E958CB295EFDCDEC11
-:107290007E4BF33CE67DA696F7A3F89EF704B5E88F
-:1072A0002AFB7E05A59B7FF9E3984F6D9EE7EC8056
-:1072B000F93E4B0DF55F35A7EF9CB5C6F7D5CD4F21
-:1072C000623F7389BA1EF206E7359ADF577E017E68
-:1072D0004CB5293FBB53E8A7D1640CE8A783F6CC93
-:1072E000C468E73045D9B1D285CCF9E54A3B96A7C9
-:1072F00056122C5B0A18DF2E697EEF11E09F9ABDB3
-:10730000BBF0FEA143C15129D7D34F263557E27EAA
-:10731000E124BE8F7C6FF7FB34E30A69FB890ED34F
-:10732000F9673EEF599C0EE23CF42C986F113C57E4
-:10733000BED1CFE7FC914C07FA43853CFF660C9D1C
-:10734000977CEDF312F311F313EF97CA94DFA2B415
-:10735000177CDE52C0E216739BA635F4A7A858B37B
-:10736000FF0B5C2F13D37D7A13EC4FB6F27C33C343
-:107370007D79F4EF28C8AFE0B76AE2C5FB43CD7C66
-:1073800025E84C1CD600BFEF18FDF82E7E6AFE09DA
-:10739000E245D01B6EC6D3DFC744F9CAE037533E7F
-:1073A00032D4E7351AEB67AD6D1920EFD5A6DF476C
-:1073B000386BCA2F11A5A7D083F23757D5CAE11C65
-:1073C000CD3CE26B6079B8EC1CDE29A5F1CD1F82C3
-:1073D0001C363139F83BA7FFB6425F6521DA2FAD85
-:1073E00008EF415C9D2EC345BFB3D74B2E90AF39FC
-:1073F000F5C3F13E9D62A2617FF7F6E0872D296417
-:1074000074A8AAB3121B359E55740CD073557B64B7
-:1074100071CF95634A5FB8B785D163E913BB6CE957
-:10742000B45C5057CDFC8320931B718FB4E03FA117
-:10743000FF17AD3F80EB70BAFE30C8572D9C8B28EC
-:107440000239363DAFBB19E9506BF213AA057F7ABA
-:107450008917F8D3FF88D30EE7AA7A9B37E91E5F16
-:10746000C1F8CBF923D9E83F9E57D57EF09D3F81E7
-:10747000DD5B2F29FE31F09CE20BED5478553CDEAC
-:10748000E37BAC53262ADE37E21F03E7DFDBFE3A5D
-:1074900008F76305BF8AF9D6DAD723BFD612E3BA55
-:1074A00072365DC040DC74F6F664CCDBA2FD17EDED
-:1074B000057F63BB15FD8900599606F74CF81E63DE
-:1074C000F7D056ED4DC2756D553DDB6FA9DA91844D
-:1074D000E766E9BA12EFF716F438563FC1968EF414
-:1074E00072E33D5964AF91CF059DBAAF0B4D745A0D
-:1074F0007BE0CD34B5FB3A5147A7F61EE864B89F50
-:10750000714B21D78F9C4E6405D73F0F1CCE867DD3
-:10751000A6F375B15E39CA7AA3EBFEDEB9D7637EF6
-:107520009988C755F417BF27E0ED0B74BDB07E14E2
-:10753000D2CD4CAF8A7FCE41BA90BF3A09C469EF31
-:10754000CD24F74FA7CFEF9798BCDCBBA6B202ECD7
-:10755000F9AB85CCBFFA33D55B5A2E5D0753BDA579
-:1075600051BDF501D56750FF70651AD6FFB252C5FF
-:10757000F293957958B673BF5FC81165041BF8592B
-:10758000AF73F979BD50AC971E4A03D7A2E29F1F93
-:107590008CB240E83370DF8CB24184DCAA19EDE193
-:1075A000CCDB8DF6AECDEA2A87F3BC8127D87D6887
-:1075B00055BE1B0CDF1345B5C13DB8246F44E439FB
-:1075C000CA9B6A83F3E8774D4E367C3F63ED0043F8
-:1075D000FD834295F995159986E777CF2A30D467D0
-:1075E000F3FB5C893A16E5E6219E374AC8584617F0
-:1075F0009E8FF24DDD987EFF46E1FDE61D2BBE37E6
-:10760000D343D075EE6699F8697F733653FD4541D3
-:107610006C6FA474A2EDBEFAD809674748C38E11F7
-:10762000EF8EA5F5633B58FEEAB1FAE49F82FF7442
-:107630006C476A02C451FD0D32F7335C78CF99E88C
-:107640007742FD2ACC53991D8CC17308B35B02CFDE
-:107650008B3AFCC400BA78203747E5604842FAB15B
-:1076600038C0CB3118C73F45FD3A571FB83F8CD4BF
-:10767000430907A712E9FB7FB4A60641AE2BFE29FA
-:107680006B69C04F2FC7F27D1A09FBFBF2BDEC6D91
-:10769000EB90BFD49D2194DF185C2FCC6963F3235A
-:1076A00052F100A0FFA924A2255120962EFBCBDF8A
-:1076B000144AA78539AD45704FCC2C7728F54EDAA2
-:1076C000AEA3C9CAEEA5A7FDBA687DE9AF63B6321D
-:1076D0007DA2F5837B2222F80C16C1BCF3FBFB6272
-:1076E0008652FA7D393F58847A6D452ACA9519EF3A
-:1076F000ED363FE23700722045F46444CED8FE1BDD
-:10770000556EE9A06FE658BD7DC15EB5AFB7B27BDF
-:10771000E1142D611A9E33DD8D7CDCAEA8E530EFDF
-:10772000F6B56EBC4F478C5BB55ED6D87DB8942F4E
-:10773000E1FB0DB21FEEBF11762BB056F2C33D39FF
-:1077400066BE79F0813198F76EF67F457996CAAAC0
-:107750005FE7472CDA2FE3EF5890916DCAED86FB77
-:107760001DD9EF7D10FF58433EEA12CF1FFEE6B051
-:10777000A05F9308EB8ED34765E4B3D39EC6D1696F
-:1077800099905E7270F4BFD1FA57530227E15CED15
-:107790008383FD2301AF8B2DEB3360FD74AEF9C401
-:1077A0004FE1FED82F7F63F5C2B08B5E5E3818E3E1
-:1077B000F4DCFFEEAEB7C4FDA45A3ADC17B458DDD2
-:1077C00089765CDD211136FF20C229ECBA6B9384E7
-:1077D000F7049D18E55C07EBE539A6735D27F8BD56
-:1077E00015E543993E11F6FE315E9F63617C4DDEE7
-:1077F00090D8BD52FCF71E843D10FA5AE8FD19439B
-:107800003D2C9EC1F535213B516FCD87DB94E83C83
-:1078100097BC14C3E2CB2A5DE08FC67B4BF16FE3CC
-:1078200050A62F16D97EF30CC852356945F8BFB45F
-:1078300006E7B7BAA1FDD6FA3ED8DEEAC5782BB77F
-:107840002F70AD3DE8A56A2E7F4B1B25BC1F8970AC
-:107850003B398FF74F5EB246EC86278A7D31D9954A
-:1078600079DCAECE23A6786DA3D1DEF9E2D9E2773A
-:10787000111D17EC67042EEA3F53DCCDF707DF9CA0
-:107880008A704BDE601438AA493804F7442DDDC1F4
-:10789000E2D766B8CCF3B85638E77BA74D4C1AA9A7
-:1078A0001BD704B7C037067C757410789F1F60F82B
-:1078B0009CDFCCF6033EE7FE1AFDC338B399FED534
-:1078C000C43715F2F3AA3751FDE98EF083E08385C2
-:1078D000BB82B85FF115694C70503958B279D78CBA
-:1078E000EB54583FBF87EB90597D42D99624BA2E6E
-:1078F00008BCFD4CC5A0DEE3F5FF2A3C117E6F36C7
-:10790000B6A37899D7C4EEC5D67DC7F3D00388AFA8
-:107910000581800DE2990B787CB037386B1576EED7
-:10792000BD7778191EFFD57087861AFDD8887F9499
-:107930001D75BDD5E517F5628F3FB58606813D0EF5
-:107940000F52D01E7DA378FF529202F6391BD70D3D
-:107950003DE9DBF9DC2ECF033B4DCB939B5FC17B35
-:107960008F3EDFF40AEE8FDA7E332F01FCE5939B26
-:10797000E7FC14CE059CDC3107ED72F52F845DF633
-:10798000DBF4F67EC2E6D9BFFC11F0E94BB118D7A3
-:107990009FDFE2E7FE38D57FA0173733FD4736314A
-:1079A000FD580DF6AB10ED572E7CF7C87C7F2EF0FE
-:1079B000BBEE39DAB547E6F8C7607BE20AF1FB7B3C
-:1079C0004360BF847D1576F7DD74FFD9A16017E4AD
-:1079D000773EFC019DFF99DD32C67496CA5B33E0A9
-:1079E000F7507AD2E3DF1FDF962E7CBBAF01DF5565
-:1079F000806FF48718BE8FAF65783EB19EE1BD61A0
-:107A0000476602AC838FAFCD443FE8F88E6CC4F775
-:107A1000DC7514DFE807AB463F682DC537F8FF80FB
-:107A20006F3A6E558BCAF1ED65F85ECBEDD07A56A4
-:107A3000CEED86D7C07DA0571EF9558C17EFA18ECD
-:107A40000DA5C23AE5D42E9940DE42979FC4FD1998
-:107A500081E77F90C6E7C1AFEAE6DF6C882110DFDF
-:107A60005CF8AA13CF0D7D2995F403027434FE212E
-:107A700001C68B8CDFE5D7788A46E9FC9A6BA44F68
-:107A80000DF1615E7F4DF31F3E06BF1EAE1D827578
-:107A90007F8DB82F62AFF1BE0849059D86E747ED9F
-:107AA00076E08381E6FB34FCF8FB3017B3BFBE6F92
-:107AB00019CA733847BFBF521B17B2423C2ABC4B8E
-:107AC000427A2F7DA824A184C0BE541DC231BE8835
-:107AD000AD2B244DC338630CE59B38B8AF0C2ED1C9
-:107AE00085E7AA8BC51DB7D0719D1178CDCFA78230
-:107AF0002202FBEE881EB7AD2B627EC052D982EB0C
-:107B0000902536B61E11F921B7F2F7B716B175C92F
-:107B10001D452CFFE21C2413D17ECF6D88E7F9CEE2
-:107B20001331FE29EE0B5004DE5CCA59C3EF27F077
-:107B3000F8C2DFA00D85736E0C8FFFC24FB6D0F672
-:107B4000F7F0F6F734FE09F7E5E84AE639B0BFF793
-:107B50002E8FF1E2FD8C701F1CE5BBC7E3D83E0AF7
-:107B600049495440AEEEE67AF69EC6277D608FEE18
-:107B70006D8CD7A0A4E304088FB78E847DD8FE3621
-:107B80008CB7CEB2B7FD06DCEBFBD34E3C6CA753F3
-:107B90005B6561FECBAA3E04F36B8651371EE2B7EC
-:107BA000F4D59E2BC957E31F633C7909C475AF27F1
-:107BB0008CB1C6225E0D758A5FAC3714DD70E7A606
-:107BC0007184BC4FD4A140EF25801BE087D9891870
-:107BD0001FB815E2CB7DA05490CFA62B246061E5A1
-:107BE0005A07DE87C1E2CD53F9BCEF184B428974C6
-:107BF000BEA1B78821DE7D67C812CAA574B8550931
-:107C00001D00BEB6D8552BAC0F7C155231AC9B97DE
-:107C1000ACBE36787F5E547EE7A681B46E61FBFF12
-:107C2000E11F48787FC93D54C8813FEF53488B5CC2
-:107C3000CCE807FC57DB87DDC71D7E80F1B788B332
-:107C40000B3A0DA7DDEBF17B0F878FF6B33601DA28
-:107C5000DBA2C797B673B9107EE7622EAF8B05BF64
-:107C6000ED30CAE961212FE0E752BCDDC3CB9EF8BD
-:107C7000FD20E7F7839CDF77168975F8B58DB7345B
-:107C80008684F4BFD724C6BD9597A122E63F0B3862
-:107C9000043F131E9FB250CD017CD4DEB806FDA672
-:107CA00005A67831D1C7B1E468F52EFD63B902A508
-:107CB0002D3C17E0916E8AF5025FDF63DB99CDEE14
-:107CC0005F317E27F6716791562BBF8F8CC5B9B88F
-:107CD000BD2A931D784E7F96C4EE5F3A57E20C584A
-:107CE000A8BFF829BFFFE47C1D3BFF3AEB07EC7C03
-:107CF000E7BD898F4C05FF7056824D81F253FE3BE4
-:107D00004FF79356A7DB1DF14F1A4A647E1FE8BF59
-:107D1000DD09FB196B40AFB0FAB3DA388C2AF1FAFF
-:107D20008ABFC0FBDB2F513EC0FA8FEED4E8B8E724
-:107D30000EF3F7015A87FD92C7043FAFC6FECE3D52
-:107D40002DDE37B0FA13E2FD93ACFE13D13FAF6FD7
-:107D500030BD5F657AFF7356BF50F4E49D70CE71FD
-:107D600016DFC79975BD847AA518F88DD277D6EA43
-:107D700010E27996E5202B4B4908CE5DF4F6DDE064
-:107D800061BEE2A254B8D7A2DD09F63B77B886F50A
-:107D90008143FDFF04BBB6689A14B081BE3C1ACC87
-:107DA000E1FA3D6ABE7631E7DF415ED69FC037ED2E
-:107DB000276658EA77EF6707C035CAD08FEBFBF428
-:107DC000B3BC3B3CE9DFA79FCF4CFD08FFE8E16275
-:107DD0006D24F44726DE6088FB2DFEB13711FC2BA5
-:107DE000F22EFB7DA5C5AB77668CA0FD2FFEEDBE08
-:107DF0008CF9BAF5784DA74C34AA8F6A3B252CBF75
-:107E00003AF0890DEE1FA8D973C0565E08BF0B73F8
-:107E1000C0364107D71291874ADA94E93AFB7EDDF2
-:107E2000300BD71BECF76516FFF634EE772EB6EC69
-:107E30003CF90B88035DCFE272E6F9B979BBBFC1AB
-:107E4000FE7314FF7DFC30A68FE68FD46E1A06FBFE
-:107E50007B80335A4E58137D1F7F2DEF6F561CD3F6
-:107E60007373463BEDD066D451FF1A381F367F8BB3
-:107E7000BB18E2BCE38796560CBB6ABC34CCE2A5C7
-:107E8000CD2C5E3AAB4FEB4354899335BF7BF95908
-:107E9000FB8D844C7A9674DDF30B71483C2E8D7209
-:107EA00077E0CE890331FE85F5F9C35E7F3640DB8E
-:107EB0001FE1F7FEDF3B66681CE8873677BCC545E7
-:107EC000E5B9BC70F61A80E3DE313796C3F3921839
-:107ED00067CE6C167747BE282FF4DD07F386EF21B7
-:107EE000DEE1B7B1F897FF6D19E35FFEA2787FB4CA
-:107EF000FDED591C0F6B8631FFE58885C2591C8149
-:107F0000438C4F1D96875A697FEDABD387C339BC2D
-:107F10006D8525AB112F7CFC6D85FE5AA88BF1E990
-:107F2000748BE0F9B5C2B184C3B11ADAD27E7CE3B6
-:107F300028BFE9D68DD327C61BEAB74F4E269A3EF7
-:107F40000E7BFB00437DE6AC4CC3F777CF2D30BCF6
-:107F50009F12D33AB2EE3BF8C1B54E671CF8639F4F
-:107F600035FFE3A37BC0BF6B92F1776A16EEDFFEAD
-:107F700011FC6ED3793AE1640C86AA180FFBF20863
-:107F8000FB1D4EEAD729FA7D9D33A4F519D807D5F4
-:107F9000ED1744DD4F15FB058B5D2D98C7F7BFDD51
-:107FA000D7D9368CAF878B21B519ECD2871887AB20
-:107FB00071B0799DD9770C7FD702F20AAE503EBFDF
-:107FC000191AC2BD7A9DABF0F7C226F0DF139E00EE
-:107FD00097B0C3BA60E0030A9C6BAFA525D897722F
-:107FE000AAA712299FB41E2043F7405EAFDB897910
-:107FF000174B3B6FC338F791B840E103F4BBC56B37
-:108000002BB15ED3198FFDFE596E2DC7FCEDDF4BF2
-:10801000B89F3065C0BDAB017EF8FE413ADE94DF0B
-:10802000DD5C0178AAD9C3F233A6C8EF8F847E96AF
-:10803000345662FB29323922517F21B1F31EEC778D
-:108040000AD87A5A97473BD781FD956DA19C7F0747
-:10805000BD6273A25EA9ED8CC5769326303BFD36DA
-:10806000D71BD636065759E7347C2FE8DF3ACC6366
-:1080700038776F4D6D52E03E4F6B9B84DFDFD259F6
-:1080800080A598E7DB79BFC2DFA1B2A67E530EF9C7
-:10809000996FA7482E743F4C7AF742DD98441245F9
-:1080A0002F758DD3C9F29D633A59FE73EB70ED24A1
-:1080B000C8D7D4156D0AECEF1087DD05F89A3A762B
-:1080C000B83A5F274FF2C1BB6C4017EBA6F76C6064
-:1080D0009763683941F77EA9C8EF37E9E58E6116E5
-:1080E000EE3FAEC2F90A3B438EEC457EBC4F9C8FFF
-:1080F000E5F2F209FFBE0B4FC0EB40C75763703D7E
-:10810000757AB8FF0AC0DB5AC27EAF8628AD19B0B7
-:10811000AFF2AF829FD2D92EA1BFDFC67EFF77AC70
-:108120006A81FD02C52BEC0B935B318FFF017C0252
-:1081300054430080000000001F8B08000000000076
-:10814000000BC57D0B7854D5B5F03E73CEBC92992B
-:10815000C9E43D210F4E208420012643124208C964
-:10816000242408486080AA840699208F8804424409
-:108170001BAFF6CF842410042D8AB7372AD2019181
-:10818000A2D53620B6698B382168E3B5D7467BDBAC
-:10819000E2ADB5F151048B3580D72FB62A77ADB556
-:1081A000CFC9CC9924886DEFFDA37C27EBEC7DF63D
-:1081B00063ADB5D76BAFBDC37ABB184B60EC163B54
-:1081C000E33F8DF18C253176719A8E31F8F5572287
-:1081D0006BECCC866749499F3B8EB1EE7BA64F176F
-:1081E00065C6AEE04F0954711AA81EB30F7CCE725B
-:1081F00019DB7C3252BE4F60AC3216DE013CF0829D
-:10820000D17F309DDE33210E9FC68302946FB60D61
-:10821000647A2C8CCD79D11C6053A1DD17CD1283EB
-:108220007E3A72BDF1CE787C3FB15CB031E63E6102
-:108230009418D41B3BCD9DE0CC83364719AF3A9EB2
-:10824000F027633E3EBEF2593A96CFD81D26FED99E
-:10825000DC25822F2A8A316FFB7CC660AC3583CB4C
-:10826000189BCED8EAC14882BD7BF8FBCBF5897359
-:10827000198CFBF2BD306898C7EA7B8529C7615E1F
-:108280004CB63A27001E2A93576E6330CE4A5147A8
-:10829000F3AD9C1CED6F81AA1B07A3E9FB4A91F586
-:1082A0000A318CD50DA653FB9B0663E9FDE64133ED
-:1082B0003D570F4EA6F7C64191B9015E33283037BE
-:1082C000C037CCB1FA7430BE492E6F05E2A3B2E5D7
-:1082D000FA79D88F775B52AE17F0B1E8DE7EC90429
-:1082E000E3621683FD49E86F51418E639D2538EFA7
-:1082F00096EE2A1822B41BE731B8E1FD1A78CE09B0
-:10830000295F0BA8EDB42026EC731360DC8B5AD3E5
-:1083100075F7B160F90227CC07F1CD9AE9B948ADFC
-:108320003F0AFE6728F5575B021374D09EBEDEEC51
-:10833000DC06E3BA1427CF45BC34ECE4F86BD07B01
-:10834000E65861DC0D8F084EA00CBB35DF6A623049
-:10835000CFFC33F5066F76B0FFAAC1A94C063C2CC2
-:108360001BCCA067C914EF72C443CDE04D0A9DA693
-:10837000D293C9053A1CCF56A4AB8C032AE074569D
-:10838000C6F749FD8CC46F41FF9FFC524FE5796EE3
-:10839000DF2D381EBDDFE83C00E33967F68A48DF91
-:1083A00073A9CCBE1786784ECF7C76A0D7AD1D22A0
-:1083B000F341FB6BE0E985E7B968E68E76213E6123
-:1083C0009E59BCED2BF0EFBFA53D696C3CD0B7E1E9
-:1083D000776F4BE318BB2DB36F6A00DAAD2E0DC477
-:1083E000DF0CED5E38A477FAA0DF8DDD6FE4EBA043
-:1083F000FCC37477221381AE63BC0DC8CF1B96FA01
-:108400007FA807F8F6FB9FB3CD9483F8EC94021392
-:1084100024F8BE13F0E8837175EE16E7F9895E2C37
-:1084200072C994205FAB7C1CCEDF1B06C7137E2E67
-:10843000D71BA71C47FE057EC5F7750A9FDF8E7CFC
-:108440000F4F7DFF7C852F39DFABFC5C274165F842
-:10845000AECE12E5F7C17C2A7F04FC0728DF747CCE
-:1084600089A714F92E4B704E80C746659D548A0724
-:108470001F2844FEFF38CED902EF7FD2E400640506
-:10848000F9BF627009D58B1AFC26F5A7F2BF51E13E
-:10849000773DF27F08DFC3778CC177F7E5789F449B
-:1084A0003C95FDE06FCFFD17BC5A2005321F8BC3F2
-:1084B000A795F827B80E4CF627D3691DC8EB42F8EC
-:1084C000483C556590015FFA87DFA1756084E79CA1
-:1084D00090F24DC8D7D988997E69A935F8FE6927E9
-:1084E000977FD7CAFF1D0AFFCF33B2551E6C4FEAE4
-:1084F0004B0B6DEF7C4ED90B388F534E81B7F74F36
-:108500001A37E0C984F885F1BB915E8B0A64DD7D82
-:10851000E9D88FBA7E399F7CD5F87FE4BC3679FFE5
-:108520001B45DE87CB7706EDA17CFFF885497E945D
-:10853000FF6F33D00700FB4E44CA4F2AF29FF4432B
-:108540004494FF6AF27F5DEEADBF413C8D20FF7F1A
-:10855000FB8FC87F95AFD4F5A2AE0F753D84AF1FDA
-:10856000753DDCB0CB19F52DA41320E6495C3F9294
-:10857000EF199C479D1C9983EB525D479B8E0BB472
-:10858000CE86E90565DD04D789564F8CB64EEA9450
-:1085900075B1565917EA7AE8113BF716C277753963
-:1085A0005E634EC8BAD8782C5C2F8CCA570CF96A17
-:1085B0006D5C3D43BEAA8367285F1947590F969C9F
-:1085C000AFA70FFE7A8DFC3436C740EDFD2FF2D3F6
-:1085D000D89C91ED0919DFFFB3EC89CBF5BFCB95A2
-:1085E000613C977341CEA607F9ED865719B717C6B8
-:1085F0005B9DC83FBD117C9EBD86547F0BD6BBC220
-:10860000EA118FAAFE5F8B748F0DF269B5CB5B8E7A
-:108610007456E9DF1BE1CBDE927DED7436C6F519A9
-:10862000DCD948EF3E8DFEAF1B85CEF373BE9EDCDA
-:108630009B91736D745E91F34FB713D78E4457E6D9
-:10864000E6F640902EC66564BF0540A109A3D35548
-:10865000DFC1F1AEC26D0149D5B7B1A86F815FD658
-:10866000E5FC03F2A7720EFC3A06C11797BB8B809C
-:10867000EEDF5160D6B31CD7E14D056A79A0C32D5A
-:10868000A1DC81DF0BA9073733117E39ECEB3E53B8
-:108690000EF56FD83B54EEC3F28AA228A53DE6162C
-:1086A00058B07EDBD1936776D33CF6F0F5EBED97CF
-:1086B0003C5342E05C80AD21704118BC8FD7B74974
-:1086C000FDCC4EEDF8F97A85F60517E71F4F883D8A
-:1086D00002949C1B8DF6E471C17E1FD07F45D1C7EB
-:1086E00006A45770FEAF2C77A780BC3C2128F07FF2
-:1086F0009CC1F9AE38CEE11F1C7DBDC32729ED0119
-:108700009E372A68D6770A6E11DADD5820F8C7A599
-:108710000FC7F30F86F8561D07A860EDF7CC10F7CA
-:10872000F5BEC7F54DDF8FA3EF03C6AFD1FFCD4533
-:10873000CCEDB70CAFF773558E7E0EB0DA3EE0721B
-:1087400019CCCF9F3DBC7E8F52BF4FA753F075B65B
-:1087500003F9A7CFA0E2F34F0457300EFFC7D13F74
-:108760002DF771BE65EEB0F95F6DFC3FCAD1DA0B33
-:10877000F8236BBF0F5C0D7FCF0FC39FC23FB55A6D
-:108780007E8A923CA72F433B5171821DEDE24D1E24
-:10879000F36EB4FF83FC3140FCD1676643FCACE56B
-:1087A000FF8BCBCBB3C9FE51EA5FEE40F9E6D10DAA
-:1087B000D5E7EB41E52FF83E0BF8094D64FCFE834D
-:1087C000A3973A7CD9441F2A2758BACA7AE80C835F
-:1087D0008BC2D68FC2FFB47E51CE037E268C20671B
-:1087E0000C2E8EDF8F04B61CE5645F19B713FBC631
-:1087F000F167A64B20BCD95C1C8F09CAB32F220499
-:108800000F29413AC34F00FD909079139EAAE2D4FC
-:1088100079C7562DCC80EF6378B9EC8A7AC4971269
-:1088200084C3DB1BE78AAD42BC04DB8F7E13E552B9
-:108830009582B74C57CC9B0A5F09B82EEB884180D4
-:108840002F8E0B3E11FD04E48B11E6FD97E17CE5D4
-:108850000BFBDEADBFCAF79F0C5F97EEB0EF993E02
-:10886000F7EB7CAFD06D61185DE785D1B53C0CAE00
-:108870005661BF46FEA9727175D7836D09308FDBD3
-:108880008F08A86642F839BD0AD7E7ED76957FC70D
-:10889000BD89FC1AE4E7F184E7A59DAA3CCC78C425
-:1088A0000D745B82F2B030082F437941F0842AF7CF
-:1088B000B4507D91F908CACF9BDBD5FA13A9FE8A83
-:1088C00056B5BD2C82553A32DFA42AECBF2A57D1C7
-:1088D00017BEEBDEC4F20D27F8F755C726BFE9CB6C
-:1088E000B8CA7AD81386977D61B02FACFEC35FA15A
-:1088F0005F5AC3BEBF37AC7C7718DC1106B76BBFBD
-:10890000AF5923D03AAC017E40427CD5BABC4D5918
-:108910009743F480190816B2DB34EBEA86160EDFB3
-:1089200071ACA0AADD1202BB0A69DDA8EB42CFF848
-:108930008F318ED1BAD08F222F6B5CA3F06556B8E1
-:10894000BEE5E57FC45F93D00E661ABBA047D4C2D4
-:10895000DDA23AEE796F6ECDC6972A7C7D15FA07B7
-:1089600037FC9B765EE0AF2A704555794A885DE218
-:108970002BAF7287CC53AD3FF78B2B22F6B7D35575
-:108980005E7508DAAF2E0B4CA8877AD531FC097AD0
-:108990004D44BDB95989C7CC7D41F4A05EAB8E086A
-:1089A0004C68C80E9927EBCCC47976DF23127D7C06
-:1089B0002D401F8CAF317030C135EB8E8A6A3C0C74
-:1089C000F57BEE111B518FBEDD189B80E33FEBE280
-:1089D000FE424FD4D884B5007747AE32C850AF7B43
-:1089E00047053D4F89EEED03B0D6BE7F6C599565C6
-:1089F000129647117E9E702DAE6A06BE3EEC92E93D
-:108A00007B6F8C3DA10BEDE7FBF4EC4919C7E3DC70
-:108A10004F7C73BF3107FDE79AE6C909684FAEFE88
-:108A2000D7257393A0DEEA36BD53A07A6C2A8EDB7D
-:108A30007B5F8501CBD7B42A4FDFF5F47CF1CB27E0
-:108A40005A6C507FE071C17910EACFFEA4F3D5A92A
-:108A500000AF6F1FEF44D29C1CD4313BF4F36EC7C0
-:108A600044BF08FCF89EB9FEE545BC3EC3FAEB3FA7
-:108A7000975F5B948BF545FB36A87F16DEA33D7CA4
-:108A800076A77850C071D9AC11024CE9EC17F26BA3
-:108A900068D742B97D1BBC3FDB765B02DA596705BC
-:108AA000D926C0FC7B8ED55439805FD67718157ACD
-:108AB000D624D5C0FC6B7443FC42FA635D34877BDB
-:108AC0005C35554F227E1F9968433CCF9AEE3EEDB0
-:108AD000023C9972DD2FE1F33D33D7532F7E29AE4F
-:108AE000427BFCE717562760BCEE57CAFA3939B803
-:108AF0003A617588BDB3EE2389E8FEA241DE8AE3C0
-:108B00007C312255407F19E81EBB04D6EF1AC5FF01
-:108B100000FE6D7C6E04BBE76997487CDFBD2BBE11
-:108B200048D6F0713DC94FF21B00EE3FB6F1111F60
-:108B3000C8D7F78D8DEC3D5C7CF742C14C78F69838
-:108B4000297EA57FC6EC37A763FCD33D17F9993979
-:108B50003A33975A43D69D52FF0F3E2BD5FF03D48D
-:108B600047FFED0FBEDF5B9965B81DBFDE66F5A15F
-:108B700031F181D52A211DDE969ACEDE0DDFAD7B47
-:108B80005C4F727FDDE3F1F70EA0BC017EC1F858A7
-:108B9000F8BCA64CD713BE465D87BE6F6BD721FBD2
-:108BA00036C9EBD1D6E15F8FDD5B75C832FA3A5C2E
-:108BB000AFF829731FD77B701DADCFB34A0CF447B4
-:108BC000D9E32F3D89FCBE7E8BD9658481AF7FDCE4
-:108BD00048F4EAB75A7D7628F7DAAC52343C4DD3E4
-:108BE000397DAF9BCED7CD1C914926173D5B314EC9
-:108BF0007A09C6130BF0F9C6BDDF9D01FD7CC8FCE8
-:108C000037CD00FC5D4282015E2E1D17297EC824EF
-:108C1000B75409F2B19671B950F7CA738652F8B5D4
-:108C2000B67EFD42F4EB6EF3EBDFED577CB62BCA5C
-:108C300034519E6EE6AF40AF6ACB37B3DD17C5A99E
-:108C4000C4C6065C8F759D61E5F5D77F80F197CD31
-:108C50004C7AB75F8DD7C238E4E9D6B8B39100B883
-:108C6000980B30C42ED5EB33194C71BD05D615CCFD
-:108C700077CE3E81C6BDBE51F41BA1FE9C581EF7A7
-:108C80007DBF09E83F91E6EDB303BCFE61AE67D658
-:108C900033C16F825FAFDFB745C2F5D081F205E324
-:108CA000D402F3207FBF6776A6A1BFBEEE7133E189
-:108CB00077FDFEDB7EFB087CD7DF5C1917EA1FE738
-:108CC0002B7C01ED33534CB09D0F9ABF9D86FC3F2A
-:108CD000E77BE0E7C27CD747B31F56A523BD92D2FE
-:108CE000644BB0DEFA6DF764F27AE027C3BC6B76B2
-:108CF0008A340FF6BC91F41EAC7507C965059F6BED
-:108D00005A5F3118B2514EEFEE13A1FEBB008B1625
-:108D1000C2974FC1A301F1B50ABF4DE2DF38F2158A
-:108D2000BB5B2639E2C5F955EB84554B49AE0F18AC
-:108D3000685D4FE7F1CDAAE9DC9EAD4973DE427173
-:108D4000E4078C4E9453F823AAE300BFAA4ED7B78A
-:108D50000EE3B9ECC7468A8F6C6E35BBCD36F23B5D
-:108D6000DCC7707C12930C808F8D3297176B143E8A
-:108D7000DC2C2FB91EF906CACF48B8BF62E572B124
-:108D80002E1AF0CEED54B70EFAF9187F1BCFDB4D3B
-:108D90009A1AD2BFA0BC8776645BB0DD5E1D6BC73C
-:108DA000380BD69F3415F1187BD3721CDFB322AD7C
-:108DB0006798FC030568E73D2B4E47FFB66667CF13
-:108DC000DC0E848FE6D8B1C99A1FFE9AF4C6ED0A6C
-:108DD000FDFBD1DE473D02F051787E7B3AD7FB5E4A
-:108DE00091C77DBEADE049E503B5BC6EA79EC7DF68
-:108DF000DB8C64C7D435FF8EDAADB3F625A0FCADAD
-:108E00007B5E9F8F72DAA78C7B75736AD119E0AB9A
-:108E1000D5FA28BB00AF36FA2A0D086FDC23101CE8
-:108E2000FC2E3E0DF9F4CFAD3FB121FFBC670E4CD7
-:108E3000407D34B0C5EC3C881350E26E7F6E9D706F
-:108E400010E3336BEC7D5601CAD76C1D1F83F2FB18
-:108E50006D7BC080E56F77A6EB1076DBED4508BB38
-:108E6000A56904FF1944198F2B31F29F37099CCE55
-:108E70001B9FE9318C83FE9E54E6FBD1B3BFCE44E9
-:108E80007D5597D697897A05F8203319F1FCB440BF
-:108E9000FA78D333A2DB3C35C8079B900F60DD6DB9
-:108EA00050F860D3F19F7C0BD7C326A4BF6B381F4B
-:108EB000019F9EA6F7C70ECC65FCFBD3C827AA1E50
-:108EC00003B8558FF1348302433F081F9ECED7135A
-:108ED0009497F3725F36C953D66F40BB737397DEB6
-:108EE000D71FB2FF331A9D7B143AAE6E3692DCED7B
-:108EF00051E6DDBFF3791BD2F1A3677B5EC6FD921D
-:108F0000BA63A0ADE511D6858297CD88071BCD83C6
-:108F1000EC8BCD386F5B100F43FCAFACC7CD8CCF63
-:108F2000539DF76649C1835AAE7C7F5AE19B8D4CB5
-:108F3000C1DBF1897CFD29EB0DD733CA55757EDE87
-:108F400018FEBDCAA7E715BDF08632CF8DC017CE7B
-:108F50006CE21FB741951350F4D1D10314FF51E9CE
-:108F6000A58EFB6F417DE28E8E09D2B15FC76A3B51
-:108F700047889BBCABE0EF9DB6C4B42EC0DB9FC15D
-:108F8000CF427B0AF9550AE94FE51BB5BF393F5877
-:108F9000B200E70BED07B07DB5DFB77D9112B6F3F8
-:108FA00036E3EB03F913E5A7BA2EE7B4AC5C9063A4
-:108FB000C37A1F59C767E37CB95CFBDB743B3DDDBB
-:108FC000682FC0F7EE2E81E2CFEF287EFD3B6D3F8C
-:108FD000B1AD0EC1D367CAB8553EC31F8C4BA9E3D0
-:108FE000ED8DE1F1DCF071AB72481DF79C1D372F60
-:108FF000C0F7EAF8557E55F953C5A3CAA7ECDE7849
-:10900000B26BC2F995784DD5ABA246DE937EBC3EDD
-:10901000E5A2C16B19FE3E1C56EDA1F7304E83F25E
-:10902000E329D14FF2A3D5713A2344CFC38F2554FE
-:10903000EF346FB9DE5E8AFBAFCF084E347942F46D
-:10904000CB6E2944BFA876C12DB9E3B8BC8F739FFE
-:10905000473A6E3CD737D72607EDD0D99F04C428AE
-:109060008C4B1D4F7785EAD38D174E13FFD7B1BEBA
-:10907000EDE847D5ECFC75E50CE4F3A7F4B43F53F9
-:10908000D3566140BBFEB6276FCD473E7AB77D3CD5
-:10909000C9F5F387F2A6135F317BC24DC0FF6B0E9B
-:1090A000EDBD6905BC5FD3253A49BE433BB86E6B45
-:1090B000EE9CCE906FDE33F75716A2FD7EB7684761
-:1090C000FB7DD69379F762FD59D6B1D1380FF7A160
-:1090D0005882DD5214E907D5EE7D5B91932D7ACE4F
-:1090E00017F372F97A2A197A727E9BD3D29289FB8E
-:1090F000E90307403EE3BEB241EE0C607F2F2492AD
-:109100007FB119DC2107D0FD9CC0EDB25A03332595
-:10911000B9E8BD2909DEBFA2EFBB13F5C82B775A0A
-:10912000739A7100E2E7F9ABB93DCDF70F6379FFB0
-:109130002ADED4715CAFF41FDE9EFA7D2FFA11286F
-:109140004F95F19F6F7DEA26D483E78F4C88C179D4
-:109150007FF082B91DEDA90FF45C2E0EF9DB7EFDC8
-:10916000FBA1761AD8751A18EC380D0CFCFBBED68C
-:109170002EDCC6ED8B5CAD1DA7F27BF5960951A1E7
-:109180007904E1F63BCB08DFB79911C5469037EA81
-:10919000F34213200A1835156D7AF8BE3CF28BE7BE
-:1091A000FAD0DEDF63B41B619EEF23FFE3BED4F38E
-:1091B000A21FF761D036C7F5F0FED11C3FFA91EB44
-:1091C000DEF2CEC5F64F3FB883F20CD6827D9928E9
-:1091D00084D8CD0F3F7813B2FF25A7777B127C7719
-:1091E000E908CF8B80624B98BDFC7292FC8FDBCB81
-:1091F000D76A27ABF186ED88E7C9F0BB933911CF69
-:109200002A7E55BFE945E083025748BCAFA996ECDA
-:10921000E40B4D5E7A7E2CBCF3C02CE45F6B94F3C0
-:10922000207CF6F3AEBD6232D2F978CEE7E8F716CD
-:109230005AA2ECB86EFFD2D4489B8F179AEAE9A9DC
-:10924000D2598DB7CD3EDE4DDFFDA56BFA8959F0C1
-:10925000DD494B1497FFC3F67B383DC3F340EED88E
-:10926000322311DFABF3FAF06E4E5775DC1F1EB9D7
-:10927000D586F3EA7E2CF6C44CA46764941DEDBD3C
-:10928000F54AFEC7D90E6E4F9F33451D5E88792380
-:10929000FB96253090B36BBBBF7113BE5FF7826046
-:1092A000473FC0F9C2121BFA6B7F92FA6D767CC2FF
-:1092B00077011C8FE417511E15CE63B41F5518900B
-:1092C000989C4E5BBDC42F332F487ECC1BF933EEE8
-:1092D00053613CE4F3088A873065FF69ED4F791CE0
-:1092E00065C8BF55FCBB59CABCDFCD8DE1FCADBC28
-:1092F0009F53C0DF7FB0EFB945D8DEF9437A3B8E8C
-:10930000FB2F87F4D4FE06F0CB7430DE7347B8BF72
-:10931000B3A153203FF9FC11D0D730AFBA2D7AB7A3
-:10932000216A381FCE81F27E4B900F37B8FDC4DF23
-:109330004CE14713FC7765DC707E8C669DDB111F6A
-:10934000FF285F9E095BF743FC381A1F28F8C27597
-:109350008CFCA8D27B4307DF578FE9CC2945BE524E
-:10936000E9AFCA095F19CB42BDDA6260599887E359
-:10937000D34538717D2FB1C87A01F0B02CAEBF1C37
-:10938000C569451E9793E21C9D5B87FAA5C5487287
-:10939000205C8E5CCCE5765223F234FCB3E6713B64
-:1093A00042CFEAC90F519FA07752517F2F898CF984
-:1093B0006F19AA7C79FCDB2B2418FF925931778E28
-:1093C000778253F67CCB0A09F877C9F498E7C7018E
-:1093D0006CCADBC6CBA7C5E4E9016E6E6E5D510EAB
-:1093E000F0843CF7E7B9F1C17ED476E1FD157CFF4E
-:1093F000CC64AF2E2F1EE5BA85E4F4C7C2C0D4C634
-:10940000F460FDD705F6F6CF8520DCAF676968DF2D
-:1094100059B1ADF8D19F8BF2DC917979C3DFAF669A
-:10942000AC8DF2E77CBF3823703FCC63027A2D56B7
-:10943000F86AB5C912207FBE5D7F6188DEC847CE5D
-:109440002809E9BA48E1A3C552A01BBF9FC45AED41
-:10945000674D6442EDBB123BBAFC8685C7CEAAEDD0
-:1094600001BF7CAC87F9025F0BC09E8DB0640440E5
-:109470007235C82FE1C42F3EC3765B7CACDF4C74E1
-:10948000A8B6A3DC13985777059E7591B6A918372F
-:10949000A98B4CF323DF373CFFD16964AFDB54FB6E
-:1094A000C55B40FCBED5CEE7C3BC85C48F772AFC24
-:1094B000F84113ABCF80A5B7B8AFCF26C3A02F2CF0
-:1094C0000A64E27ABF9CE6CD453A7CB0AF25A5019F
-:1094D000F8E7A36346E742A87FCEFF1CC5E1362A22
-:1094E000F6283B14AFAC7B315002F57AD3271D44EC
-:1094F000FD529CC7F5F585F440DA3D2837D2B9FF17
-:1095000003F528CF6DDEB6EBE3B1DE85A33B32D6A3
-:1095100002FD8C12F35963E8C96C30EFF9D0760183
-:10952000C07A8045DACFF5537B58CF86FA5EBED538
-:10953000C1E3EDCC837245A5974A8761F48121A0F0
-:10954000BDAA33313D8E7F12DB67C7F5AAD2E9038E
-:1095500013E011E36726C023ACEF0A0C3AE4223E85
-:1095600079BCA541E86F8D45F85981F2E686EBC1DB
-:10957000270D88F2DA7DB792FC51E58E0CFF8D2421
-:1095800077BE76DC68DF9C11E5CEFA3C45EEE4B0B0
-:109590009C2BDC4024FAAE57BEAD10AB6509C71D4D
-:1095A0006F72623CADE1F1F1A46F58F67FB2D07AF0
-:1095B0006C5F2CD7ABE922E1FDB62E81F21B2BBBF1
-:1095C00092990C450BBB62E9691B4CA2F7E70FBFF0
-:1095D0009ACBE512A74BE5F713CB28AFE8FB13E9CD
-:1095E000A98EA341E1BB0A31BB3380768405C60155
-:1095F00070C32B5C6F35DC28525C93A1884E4062AF
-:10960000F21F8FA59DE23F1E3664DF0B57284E2BBD
-:1096100047215D3CBD2243FE016FC3C7F16C6A4622
-:109620003C1B1D3A268F607F18153A99E50826875E
-:10963000F81D926FD2778A301EFB0DBDD30FE52D3A
-:1096400066DB415C4FCCE7EE437F61B9F25D9F99E9
-:10965000F34764568CE6FB1DB6B9BDC86FCBDD5C25
-:10966000EF589D6334FD1BC58D7A6432E6E5F6A2A2
-:10967000CA0FC497D0EF628F40FAF5C6E5501ED2EC
-:10968000AEBEE822C9717D91D6CE347AB4F5BEAFB4
-:10969000D27F129B144AFF20DE2D6EB4D32FB9ADBA
-:1096A000C4C7A0DDFFAD08E09B7AF50CE76B8CE04A
-:1096B000F3BA8498C2B8A85BF463BC6407E201DE25
-:1096C000471568F119EDD6E22F769E161FF11EEDB3
-:1096D000FC13978FD3942779AFD39427D7BA3470DC
-:1096E0006A7DA1A6FED8C6320D9CEE5BA0A93FBE46
-:1096F0007DA9069EB06785A6FEC48ED59AF249FE66
-:109700000D9AF2C9471A34F094CE7FD1D49FD6B5C2
-:109710004D539E13B84F533EBDF7210D9CD7F7A86C
-:10972000A6FE8C330735E533FB9FD694CF3A774CB2
-:1097300003CF1EF899A67EC9E0290D5CCA5ED5D478
-:109740009F63FAB506AEB0FF5E53FF7AC77B9AF20D
-:10975000F9F29F35E537645DD6F26B04977F95CEBD
-:10976000BF69BE1353BC9FA23E60E20509F9B6650E
-:10977000A5C062319EDEBBCC847260308C0F3FCEC0
-:10978000B52B7E0D4B43795621160570DD5EEA122E
-:1097900068FD87EB3BE9CF1E37C6F3D84F0427C6D9
-:1097A000D9A2406D4921FD47BB4DE04806E1D8797B
-:1097B000760D1CEF7168EA272E9735E549DE2C4DB2
-:1097C0007972AD5303A7D61768EA8F6D746BE07496
-:1097D000DF3C4DFDF1ED1E0D3C61CF724DFD891D4D
-:1097E0005E4DF9247FADA67CF2917A0D3CA5B35174
-:1097F000537F5A974F539E1368D7944FEFDDA38141
-:10980000F3FA3A34F5679CF16BCA67F61FD194CF2F
-:109810003AD7A981670F7469EA970C063470297BDF
-:1098200045537F8EE9750D5C617F5353FF7AC73BCB
-:109830009AF2F9F2794DB96ADFDC907551FB5EB1AD
-:10984000772A9D9F69BEF795B919F287EF98E06C6A
-:1098500091417EE5F3F80BC8F57EB388F69187E277
-:1098600046319820087C1905420CF90A5D856A8A00
-:109870003FC551DC9754938CF93E60270010A34BF1
-:109880004F477B3A3268B7A55C997EED76DB1A6864
-:1098900013F97C6FBEB72A3F0FFD95A373D16EBF3E
-:1098A0008DF9B6E33840EF45F5C3FA78CDAC8D6756
-:1098B000A8CFF926C04B487FAF98F7A4B8AEE2F71F
-:1098C000CF375DA0FA43ED2A710E01E6D710D2FE24
-:1098D00003E0574860D7ED698275030EE3434D7688
-:1098E000821F6E7210FCDD26999E1D4D59F47CB4CA
-:1098F000C949E5FB9A0A08DEDFE426D8DF348F9EEB
-:10990000079B3CF4FE50D372820F831F8DCF23E060
-:1099100057E3F369F08FB1FC19F09711FE61938F53
-:109920009E9D4DEDF4FE58D31E828F377510FCE3DB
-:10993000263F3DBB9A8ED0F3674D9D547EA2A98BE6
-:10994000E0934D0182034DBD049F6AEA23F874D36E
-:1099500019825F6EEAA7676FD3397AFE7BD30095D1
-:10996000FFB26990E0568CD7023E1ECCE77E908A0B
-:10997000171566AC9CF841B50F17A19D8FCC51A06F
-:10998000FF8BC6CE0FB3B7C3E9F1A11217D69781EB
-:10999000B988F1C33199075B42FCACC795FE7644A8
-:1099A000309F19F8BD59C7FDDAE6184679D64CB193
-:1099B0005FD72B7CC9E2B8DDBA4E19D77A653DE492
-:1099C000217F66117FFEF2EBF815AADF9832C5FB06
-:1099D0002CF167AACE47FEB3C59F89F673C9146FF1
-:1099E000677E3CEE37AE7D99FAB33B69DFB1D218A2
-:1099F00088BF19E323AF8814CF1BADBFCD4AFEF853
-:109A0000A8E527CFA7A0BD3DEF4BD18B787A4D6F4E
-:109A10005D8EF1829E7C1E7FEEC9D7699E2F4DF12F
-:109A20009EC2F17C6AADBF4507E3FFB478CBE13B52
-:109A3000D283FEF4627449C10F5AC2643DE52732F5
-:109A4000F74BE9D0D48D6060217C33F3D1736EB6CF
-:109A5000F7556CA70A0C7184BD85C6B491E6153E16
-:109A6000AEDF2AF4FA6DBE4EF3BC3CC5FB1B3E2EA6
-:109A7000378DEBB599D767E2BCD471E54E9595BCAF
-:109A8000E481FD38BE4F5FB87856181FC4BFEAB7EF
-:109A90006F2F55F24AB6083C2EA7DA6B4A5E8AEA67
-:109AA0007754DF29F8D15E5F09FE0EEE2FBDA5D8F1
-:109AB0009F6F99B97EBE54AFCF42BBBE5A8870E249
-:109AC0003EDCA5FA3F5950DD427D86FB242D98737C
-:109AD00000E52D770B94CF5D0DEDE8A09D6A0C0499
-:109AE000E277F70AC47F13A7A6D3B8ABC1FC233F24
-:109AF0002B6E200DF74B815F2EE37C37CC147D0657
-:109B0000B0875FD3F93305DA975E6B10609CEBE3A7
-:109B1000804FC68DCE0F9B94F307EA7BE0B32FB046
-:109B2000BDBFFC744616C5F14FCE94116F2D3A7E21
-:109B30001EC9F7EFA293E7BB70512DCE9A42714A2E
-:109B400026399D1867AA54CEAF748BACF1E8087221
-:109B500074EC0CCE4FAF39F4F3FCD4AE76BF267163
-:109B600006A763E20C4EDFCA53AFA4E2F9AB4DBDCA
-:109B70007AB247586E7FB6C73AC27C1A77DD951124
-:109B8000C2DF9BBBDEE1F91AAC3F3B343FBD40E98D
-:109B90005FE527D160F51EB0848E6F88BFD3662045
-:109BA0001F45037F8F27FE3E8BF6F622A31C7533DD
-:109BB0003CFB014501787ABF67A77C2335EF680D30
-:109BC000F3D0733DB003F2B3C7F7A001F1BF8175C5
-:109BD000D2FB4D05B7A621BC990D943BD09F686F71
-:109BE0007EC901A35CB6E7C10A8CCF2EF5D7BC8431
-:109BF000CF258784B3E8BFC2FA983603E327427DB6
-:109C0000DB18E86FC533A56DC9F07E91C8E9C15E68
-:109C1000E5F400BE718B31C3E709EB61067EFF6995
-:109C2000B49BE621DAE669D643F536E616E282F918
-:109C3000F343EBA3E0F63F26A33F240DD0FEFBE663
-:109C400093C618A4F306C6F57730FEA1EA6D467CEC
-:109C50007E3B8B7062BD0F15BEFE3095115F7F2875
-:109C60008083E70ADA932CCDEB708D0FEADF0F7556
-:109C7000FE7CDB78D2CF8B10EF2F3B96C91837BB19
-:109C80003DCEE414B13CDA9FC6F75187E43CBB12E9
-:109C9000198C7B3DA0E771A8F07109052F7F86F62E
-:109CA00083D1C07CB8BF01EB9BE5E3BA1E63A0750E
-:109CB000D582A8C5F85999471EA9FD56A5DDDE2F06
-:109CC000B81FEC83F9E079C961FDD8957E22783F11
-:109CD000AA1EC1FE488E24304D7F9B31C905D78115
-:109CE000D54DE36FD64593DCF978AC7713D24B8D25
-:109CF000FFA8FE616FFA0719E4C77FDE9282763A09
-:109D0000F02FCF4B2CE6F2E935BDEC43F8B5D27419
-:109D10008AFFAB727771018F972D56E3634561F12E
-:109D2000B1B0B80C2B1A395EC698538FFD4E626FD6
-:109D3000A9F8A178CCA92289E8EE03BA63BCF9940A
-:109D4000E2A7964672FFFCF73362899F62E66710CE
-:109D5000BFD9625980F6A3AC22F15B0FCBB1C484AA
-:109D6000C889FB9438EB6EB08758487CFDBEDC0692
-:109D700013E61BECB0F0738CF79745D486E6BBFF77
-:109D80006EB69EF0797B71E92BC83FD9167F19A971
-:109D90006DB724E37C04657E93ED807F1D36ED5125
-:109DA000E2A54E138F4F9593DE56E97EAD7AFB699F
-:109DB000C9BF2D02E71FC7681D5A3BCC244FC54EB3
-:109DC000770053AF27152F3D4CF4943C59D84F776B
-:109DD0007E04B340FD4FBB0DE4E79FD4ADFE1EE60D
-:109DE000C50FBC6964B8FFD9694D96506F747E7118
-:109DF0005D393DADB3E6321EEF8CD481A0C8B1B35E
-:109E0000277E844453CE9F750AAC9751DCCD1DA9A3
-:109E1000035FAC53C72E97C0B88E595C7BA711EB7C
-:109E200079449CE77B45DE9F225EF2593DC1F71BDA
-:109E30003CB507A0DFFB634CC42FF714794EF071DB
-:109E4000B2B68530BEE23902C3F3BC6D066E9F59CF
-:109E50009D117C6F8A713BDF339849FDFF429197DA
-:109E6000AD0E771F1E1C19156F766960283E427C67
-:109E70009742713D158FA1F4B2E76BE8E5D587D223
-:109E8000AB00E83525945E6EE1EBD0CB8F4966F1EF
-:109E9000C3F9D457263F589ECBF51BA6CA85F36954
-:109EA000A971B605F35CBA6DA20EE9D61D919C8D21
-:109EB000F139954F55BE1D815FB7F4A0DC4891EC98
-:109EC000B86F6CAC8CA07D18957F55BEB514F2FCB4
-:109ED0002DE0DF5585F05C69F154A06C09E75F8CDB
-:109EE0009385F269F5A8FCCCECA1EB7811D815515B
-:109EF00031680F9D3BD419C2A7D5F517252E57AE53
-:109F00009444E407E37A8B8A04F66E28BDE1DFBB54
-:109F100059CAFCC81E92C80F53F17AADF8D77FA377
-:109F2000390BEDBBED786E11F0D52E38DD8918EFC9
-:109F3000AA7FE70E7CDFA69C1BF6651BB8DDA5ACEF
-:109F40001BB5BD49C5655105B82F30E342E43AA8B9
-:109F5000F769824E46E4B4C9AB7F44EBF04C24C3AE
-:109F6000EF6CB17DB54FD0BA9AC870DFF0D3DBBCCF
-:109F700063711F7F27D0E95D4AB2F627EA688FAB8D
-:109F80003F11D71520D7C19F5E077FCF94723FC185
-:109F900087668E53F2ACDD4AFD7EAABFD3B0C714EC
-:109FA00081FDA49BEC0743F8BF4489BB5716A8E783
-:109FB000755A64B4D72A0BB85DB3B7E9C8ECF72774
-:109FC000E0783A67BF0FE3895DE8675EE0EB882CD5
-:109FD0009F8CA921A62FE70878AE815DC73A311E74
-:109FE0008FEF9BA704DB7715F07567423B06E867A8
-:109FF000DAE69343E5A849277847CA83393C53E218
-:10A00000DF6D63546E3AF5089DF38FCD700A980F9B
-:10A010006DDAB687E13E8D39C0DFC765B885352179
-:10A02000EDC62D847187F005F0972F0AE48FE920A3
-:10A0300030662ED22182E292E1FD2E8A2FEB956CC2
-:10A04000A3F34938BF3185DF54BE51E74927564253
-:10A05000CEEB978FE376725BA3E100E5A116441384
-:10A060007E3F892B8B6223D89FEA733FF081CF8894
-:10A070007EB3899E07C1EFF64D44BFD941F061F030
-:10A08000BBF17904FC6E7C3E0D7E37963F037E3734
-:10A09000C23F04BF1BE14EF0BB113E067E37C2C774
-:10A0A000C1EF46F8C7E077E3B30BFC6E7CFE0CFC17
-:10A0B0006E2C3F017E37C22546E00F9C4F96CFB1F4
-:10A0C00014E8DA7EB7C18D7984FB15BAF6B8C7C536
-:10A0D0003A81FEE62C1DC5C4CDBF7C88E17CCC0E48
-:10A0E0001D9D0BDBEE7888DD8AFE6CBE95ECA9B673
-:10A0F00067B99D6296F632943BFB055F2D73C2FBF8
-:10A10000AE926ADCDFCB706C298B01785757C53E65
-:10A1100013AC8F4C79C9F2E61058B6BA361CB507A5
-:10A12000E1B1D90724F058D89E8279FBF048108E0F
-:10A1300003F3871FED5A50DD0C2C1418C7C8DE1826
-:10A14000483750DECE1AA417C6230A783CF106D64B
-:10A15000E2C0FDCCB132784502D50FB0B86BAFBFCD
-:10A16000BF40A6F7E1DF5DAD9E2EF79AEA31F12AF6
-:10A17000ED61B97095764CC232531F8C7D975E911C
-:10A1800053F1169253ED18DF01BCB79BF9F3BF678B
-:10A190002A7ECECCB25533E1B96A26A76BBBD9670C
-:10A1A0002FC3FEA7E8289F8135A6FF7A1CF477D736
-:10A1B000BF4B0CF34155FE7C5EE1830963AD742E09
-:10A1C0009FDD63A2FDFCEBC73EDB1A03F084279CF6
-:10A1D0004ECC7BD8C59C11C827BEDD3ACA7BFC415A
-:10A1E000EEF89825507D72DEF33128D763677279D7
-:10A1F000E357F2859ADBD68DC578D4A7AF7379780B
-:10A200005AE9E780BEAF9EE89967213B04284FF6E4
-:10A2100046B303880D3A5397C49F06BD7D05D633D8
-:10A2200080618079D9862F6698D0DF6B1934CEE3B0
-:10A2300079B37D648718CC5E7B34BCDFE3D3915C5B
-:10A2400068912D94E7B6CBE2EAC573CE3EBB8EF2A1
-:10A25000617765EB088FAD969BFC68E74B42732DE9
-:10A26000EA31BFFD98291DDEFBB37594DFE8772F37
-:10A270009D87B0CF2B51FE15FD60B93786CE77EFA5
-:10A280006203AF4EC3F26A6E87B525FCF55424C64F
-:10A29000BF6FB43BF9760B93313F8C52C574E877AE
-:10A2A000F76F8BC4715431C59FF591FF6A3372FA11
-:10A2B0007DA77BBE7D1CD91921FB5A468CD5394D13
-:10A2C0004E289F6A71CD43FF52B2BA4C98F7D76AB5
-:10A2D00077996A68FE3C5F8DF232A0DD16BB8EFC7A
-:10A2E0005C2CBF359BD4E1E98C7C25155FC6793F9A
-:10A2F000D48DF890D632962EE3F8245FE8BEA1699B
-:10A300007C51AF0CF3685F1743F3900427C16CAD29
-:10A3100044E31E2347D0B9E6BD86CA5EB417C7988A
-:10A320006EA7FDADA45A49B3FF94E8D5C2F1CBB5F1
-:10A33000702C9382FB57D0AF7DA61A7FD3E22D1CE1
-:10A340001F49F6D6D771FC495E3A04396CFC8FD8A8
-:10A350001F8E2E65384E0B8D33C1B2BA14EDA67820
-:10A36000E66946FEFB47C739D5BED4940EFD4F8D36
-:10A37000D39179348D0D6CC3767729FCDE9ECEE9BE
-:10A38000195C5722CD0BD6E53C5C97631B75E0B09A
-:10A3900005DB4FF781E3A6D93F88D1C013F68CD1F6
-:10A3A000D49FD8314E533EC97F9DA67CF2119706AB
-:10A3B0009ED259A8A93FADAB4C03E7041668EA4FFB
-:10A3C000EF5DAA81F3FA5668EACF38B35A533EB329
-:10A3D0007F83A67CD6B9060D3C7BE05F34F555FB48
-:10A3E0003E5C3F96CDFCFBEC7AA3638CE67E9B70D3
-:10A3F000BF21DCEE377DD9226F437EB619889F25B9
-:10A40000D4E7B8DF7C37F78F4CC54E19E54B81C2D6
-:10A410008F9F15BB1723DD4A6D26D20B9285D793EC
-:10A420002C73C95E49EB30D0BD3B929D0D9547A280
-:10A430007C6EF2CDCE98101CB7D9BE87EEAF28B592
-:10A44000CD63988FA47E2FD9DDCC6BC5FE64EACF97
-:10A4500064F7513DB30CDF87CCE3A44EC72C28C76B
-:10A46000C18F43FF6034BF4DF5D7543F6D34FF4C6F
-:10A47000F5CBD2742C029F0784FE3BD07FCFAE7FFA
-:10A48000BD2C9191FFB605E77D3F9EDB46BF6D2A4F
-:10A49000B7B3DA1216C818CF694FEFEC1D87E389FE
-:10A4A000D751BC14EC66E7D2107BF1B199DC0E9564
-:10A4B000C6B5F7A3FE6B8836C9682F49A603B3DF7C
-:10A4C000077CEDD7F73F85F18956C1BEB113E5E2B0
-:10A4D000DD16CA03D9ABE04DB6EAA66F83763B9B87
-:10A4E000DD129ECFEFDCC99CADB83EE24AB745C352
-:10A4F000FB0929353A0C034DCC68DE86CFFB67F2A9
-:10A500007D9F49D90774B1503E39B77439C6BD44EF
-:10A510003BF4779538B468EB60381F96219D45BEB3
-:10A5200042EBFE0A0CBD34C644FB9266A4B7404F12
-:10A53000C28379D0E237239CC1F162760BFE488159
-:10A54000DBAD9847571AD341F455ED59B473B1FDBB
-:10A550007B8ABC8F213EE3166AE92A990E113E766A
-:10A5600029FB12EDD1F22F513FB7A767C4E07E96C9
-:10A570003A4E55AE1C56EC7BF5BD2A571C986B9392
-:10A5800017B46F80CF3B30FE6696F6D0B94CF3BD62
-:10A590007B18F2B5194FB193BDEF933DA43F3C9AA0
-:10A5A0003CB4F271CB4DA8AF2FC7B9C89E3537FE6A
-:10A5B00098C6178E37733FCF471B0DAFB6CC4749B0
-:10A5C000BF830096F13CCFA9044B6D68DC537DBA84
-:10A5D0000BB8DDA257F386C093407D7659CD4B7200
-:10A5E00047F2F14573B82773058DEF8E7857E2D5A2
-:10A5F000EC6D33F89BDE10BAEF943C26C443DBE7E6
-:10A600004BE6D1BC255A0C6CD717D907289EACF85D
-:10A610004B6EC53EA9445F0C9E69067E8EC019B77D
-:10A6200090EE3353E3209766F2FC45A78F893C8E6A
-:10A630003794B7AEBB328DC62A1B54BD4BA62CD760
-:10A6400053F07F37E6AB8C6F97B479EE8A1E57F5DF
-:10A65000F4843DDAF2891D5A78927FD8F7FF897A1F
-:10A66000FE46FE3BE8016DF9A38ABEBE11F535EE4C
-:10A67000677D83E78B98604457B89E0DEA3D900351
-:10A68000A99D8152149B295B254D9EC998307D78E8
-:10A690004F914C78F0F44A7AD4B36A9C265C0E0B46
-:10A6A000F75CD882EBA534325246F989710CAF9130
-:10A6B000FBE55EF053EE979CBFAB46BFAA57A43CA8
-:10A6C0002A954EE174AD2D14147DEA110BC93FEEAD
-:10A6D0009F8EFE3AF6E70DE94F8DB79C2FF69A3123
-:10A6E000BEA1C65D2ECD935E12E4601C458D0BAC01
-:10A6F00052D6CF2EE71BF53D308E9E33468A8154CD
-:10A7000088BFEC6DC23CA95489E4977DC6C6EFA111
-:10A71000FF5DF67B28C778A22C27925DDEABA738B9
-:10A720004099C2C7658ABFA5C65BD20B399FA72ACD
-:10A730004FF82282FBF58108B45F271F01D9ABA532
-:10A7400067242FE771B6299DE1E56ECA5FBA4EE135
-:10A7500017CC3B2B4DC0742F0E773221D60E749C34
-:10A76000B6BCFF14BA0ED9AFBC14817C78D4CCED42
-:10A77000B5A7157E48608213F3F3138E589C7EA80C
-:10A780006715D9D13E9887F3B4A4C9339B7A420B9D
-:10A7900067B310381DC7A18577CBF5B8F5CC7657D0
-:10A7A000834D0E539E59A8E46567B24CE4AF0AD1BD
-:10A7B0009283FE5343A985215E8DEF4CFCB73E94F6
-:10A7C00017AFF37BABEC91F283E5F0BDFDD5586795
-:10A7D000B31CA4FFD3E047A37EF8EE15276BD50783
-:10A7E000E35ACF003D33687FD94EE59D4057848FB3
-:10A7F000815F9D41FBCB59F4FEC7E05723DC057E0A
-:10A80000353E7F067E35BE3F017E35C2B71797DEE7
-:10A8100084FCF216D443BE88C8396E1A8F716E8BD1
-:10A8200048E76EC2F97147FD7B969B4156153BC6C2
-:10A830002E8C477ED82AD2F9E49B0AC72EC4F3DBBC
-:10A84000A171B5D0386330AED62FA8713523D0E7CB
-:10A85000F20C59C95F50E26B5E1E5FFBEA76DC6A60
-:10A860003B14BF1CD6CE501CD3E47B3F0B8F6C092E
-:10A870002C0ADE7F74F77F1D463D9398E4ADC579C1
-:10A88000D7E5BD6BE076373F4F95A2ACA37D669EC2
-:10A890004F9AA2E40185C72F8BE7BC73473CA0EC1D
-:10A8A0009E9FCD5E89FE7FF1EDEF4C4F03F854E1A2
-:10A8B000532B31FFB7F8FBEF3C970C78CA9AB58160
-:10A8C000C37BDFB99CE2C43C8C875762FEAF2D96F8
-:10A8D000EBB77DCAB9A421BDA7AC97CD8D4F901E13
-:10A8E000073B83213E5A123CA45F3F8E1BB0D540EC
-:10A8F000FDCDF10309ABAFA20F36371EA6EFF70966
-:10A90000CE737E1CF74C13CF3B55F4CD2585775580
-:10A910007DD360E6A03A1ED0B0F47EAF120762EE9F
-:10A9200064FA2ED6CCE11E5B21E9A507CAE45FC913
-:10A930007CDF92FCE31EDB75DFC1BCBA967912EDB9
-:10A9400027EEB5B8CCA8B79E53E418B4EFA3FC9596
-:10A950000A13EDF3B0B8E5B4AE63D47EE2AA291FC2
-:10A96000214619CFE9C28800C6075ACA4D07518E41
-:10A970003E641947EDB514187C189751E16D853088
-:10A980001EC067B42D261D6155CEA9716386BB6AB2
-:10A99000D06E9932ED3235CFC1A4BF106A5F5B58DB
-:10A9A0001FF18F53278B681FBA67C9448FE9CCB951
-:10A9B0001CDF1B847A1F3223CE43173A0FB95C3B4E
-:10A9C0000FB942330FA1C11440BBB0A502E601F597
-:10A9D0004F5BF369BCE17453E7F3FD42CECFE1F383
-:10A9E00064CA7E927A7EA0CC5E741CC755A173B7F0
-:10A9F000E2B85EFAAC3A0E2F929CCBEA257C3F3E41
-:10AA000098CFD3FA75F2258ADF13F8FED7ED069AB0
-:10AA1000DF2BB3F9781E35F8D3E96087E44FC27DA8
-:10AA2000DFD1F8F84F0ABD837CEC66B8BE5A62DC11
-:10AA30009C8FED03B666E4E3E881846D34AFC08893
-:10AA4000F409E7E7707A0DE05D09E447FB44C4FFD1
-:10AA500057D157A56BF83E98CA2FEE597695DE0E62
-:10AA60009A67204DB34F082DC823ED8F6F87F6E40A
-:10AA700090FD3483C34376B63ECE9985F1E6962F9A
-:10AA8000C511CF4DCAB3F87A6FB64590FDDD62E3CC
-:10AA9000F677B76D81C66F2A073F0AF791C558D67A
-:10AAA00089EB4A8C5A41713431112D2F620BAD5D07
-:10AAB0001BB590DBB576D755CF4F49FDA2E65EB505
-:10AAC00061766DCC026ED7DA0C64D7EEB31A961F9E
-:10AAD0001841EE0C16723BBD1BE73182DF08FE22E7
-:10AAE000C533557FD160F792DFA7CE7350E177B5BC
-:10AAF000BED15ECF30BE261A9C32DAB1A272BE152C
-:10AB0000F39AB342EC02B5FFCBCAFECEDBC5FC3CE8
-:10AB1000849ADF5EFC2BA17E24BCE7CC52ED92919F
-:10AB2000F9EE1FE01B92132E8BC18D7687CBE2A02E
-:10AB30003CF0D1BEC32DEC73314139E3FC325F24CC
-:10AB40007D243929AFBF53DFFFDCAFD01F7CC94262
-:10AB50007AA7D39A52166A9783D14AF9C9E0FFFAC5
-:10AB6000B2A0B1A37F8315A90BFABDE087DD302B1E
-:10AB7000645FF254C359DA070AB757C3E30A43EBD9
-:10AB8000DD76389D8FC79F84EB5768284844BE0AFE
-:10AB90005FEFEA33D531FDBA3530AED4A41C7AAAC2
-:10ABA000EF1F67E2BC91EE4F5B3D4407AEA7274124
-:10ABB000675122E9E7D538EE8FB6BE91E094F19C5B
-:10ABC000ED45D2D397EA0BA27620BF67C5907C4DA6
-:10ABD00051CE8FA9E349B9AD3B3AC682797C039344
-:10ABE00030FFCDDFE4B9AE5C4F7E867BA4F13E3012
-:10ABF0004B89C305C6B2D0FB81E4B8BEF91301EF9F
-:10AC0000B245E794697DD949FFA972A0548A2EB74D
-:10AC1000039FA73631A745C6AB93ED14174BBD2252
-:10AC200012BFA5F6F0FB9DC7C60D0878FFD0503FB8
-:10AC30004A9E93BABFF2497D39ADCFD444C6FA28B3
-:10AC40007EE9A17D884FE2024B707D7FF2301F517B
-:10AC5000EA13DA72D0B914B75EB735C22F43D363A3
-:10AC6000EF85F1E178BE27B094741C474FFA0E8C43
-:10AC7000FBFC2492E23E624706C56D6E4BF2DE4558
-:10AC800078F5CB77E9C62B93857A75DF8AA0FB042C
-:10AC9000F6097DF3299FE24E1D7B7284B8D4BFCEA6
-:10ACA000E2EBFCBBB3F83A4B75E4737A3B72AF5BF3
-:10ACB000137BEDEBE914CA6D18C7AE283FEDD3A99D
-:10ACC0007961BBF523F3152BE27EEA903C56F067E1
-:10ACD000422F08F8451414BBEFC8D34F3F9DC0F86E
-:10ACE00011C3717C3F3274DF3822C34F85114E3758
-:10ACF000C91FC1EEE672D65EEFF0017FEFF8421C8D
-:10AD0000B1FFD715FA35A7DEE5C0FAE5B2939EDDAF
-:10AD1000A9F9676A007F168B811943E4B0CA27E15D
-:10AD20007ABEC13AEEAA7EBC01E4B17C953883417B
-:10AD3000C9FFDA7E6AA609EF0FDD6E71F5A1FDB5D8
-:10AD4000DD12E7A238BC05E446485CCA627999F88E
-:10AD5000D0E2E4F13A0BCA5F8C4BE1FCB371FC2FFB
-:10AD6000D3FCD57ACF2A72C8E20CD07EA9D9B98794
-:10AD7000EA99240F9D9F33C531CA6730D9F9BDA325
-:10AD800011193A661A411E1F9EC5FDC0EDD9AEBE0F
-:10AD9000321A9F84C7AAD87687CB41FA10F10CDF0C
-:10ADA000F758F3A342F1F39E220F5ABAF9FC3C8DF7
-:10ADB00049F6723C6753ECF9AF5979D8CE6A13DE85
-:10ADC00073275A73AFDACE8561ED3C92501E4BED7E
-:10ADD000BC87ED8856971DDBD12BF7A786E3F933A7
-:10ADE00085DE7F6F3C0D3048793C8417224C404310
-:10ADF00097F0A705E362B1237DC7E562BAE2BF80A1
-:10AE00005CD417C1BCEAB2DF7D99AF31EEB7C4CCD8
-:10AE1000E779429780B3F1DEAAF0FC8B703B46D510
-:10AE20003FAA3E8276446CE751B4632606D7911A56
-:10AE3000CF49AEF5F0F512E7217E01BB46C6F522FB
-:10AE40002A797EE1F3B9A188E35FB015C8A82FCABB
-:10AE50003FEF4FC6EF4E5ACF25733B56BBCF7CFA20
-:10AE6000B3C3662CFFA4B6ECAAF68ABAAF3CDA7E6E
-:10AE7000B2ED5F3EDC126AAF8CB6BFFC55FBCAA7D1
-:10AE80006C068ADFED17B4E7E32B8AB8FC7317A9C9
-:10AE90007119EF8C228C430A1E273FF0CCE3339FBD
-:10AEA000157B0B914E69ED06E603BA9EFC2CDFE1A3
-:10AEB0000D69E75AF1ACC6E1C728F6D418CB610199
-:10AEC000D7E9985ABF8071F4E4DA4EC17D957AB122
-:10AED000455C8FABF5F54AFB25D28088FAAAC4CE33
-:10AEE000F562F2A0C4B242E48EAD88AF5FBD62BF2E
-:10AEF000DB4E3D65C6F64EE93CED99A81F6C3AF96C
-:10AF0000C990F5AEBFCD652A0B995F0BEE0F8D4052
-:10AF1000C74D45AA1E0C90FE56F5AD5ED513719235
-:10AF2000464F6C8EE47CACDA3B9B0BB93FB4399254
-:10AF3000FBE5AF3ABCEB11FF1F177EB868BC8CE78E
-:10AF4000643B0DB89FFE55FB2443F68DCE5FA3FAFC
-:10AF500033C8FF4EC9FEF37EF83EE7FBA564EFE57C
-:10AF6000E18D23226ECD72FB0FECA93B8BE2F9D56C
-:10AF7000FCA1F46661F70B8E361F2FDE6B9A87F10A
-:10AF8000BF3E8ACFDEFFB930E27988AE22D52E1AD5
-:10AF9000DA0FD4C4599315FD96AC94CB18674DC7FE
-:10AFA000FD2D6D1C747AAF16CEEBD3C233CE84C5A3
-:10AFB000557DEEDFE0793FCC1FC046F7C13A4339FB
-:10AFC000B146D9F74CF1F94BF19C782AEBA4FDC5B9
-:10AFD000E4DA180D5E8B4525EF02AF3956C7093FFD
-:10AFE000C952E579FCFED921FAFB9826BFBF7CCD7A
-:10AFF0005D782526DBC3CFF999A073C4D7FAF94B46
-:10B000002B90AEC3E2B5F5DA386D726839E061DDD8
-:10B010003EED79418F3B87FC8165DFD09E1B54F369
-:10B02000D271BEC9AEE1FD7F75BFF02F6678FF6AB1
-:10B03000BB8F82FC21F9AADC279C8A45D88E14108C
-:10B04000709F7B4C3DA37B8593B732F748FB057F10
-:10B0500054F0158E67E62B21FCCD51DE8DB1F07CCE
-:10B06000D5315B75640F8E01B9407F6F6023C800D6
-:10B07000809337CA644F2EAED531D40FECF326CD72
-:10B08000F7305C8AA7AA747FD4C2F37153EB985F40
-:10B0900087F3A9BF8ED6138D6B5C901F005F9A7BE0
-:10B0A00005161768CFEBA6869DD355F92039ECBD60
-:10B0B000AFC8AE5917A0E7FE58447CC2F5DF04D4F0
-:10B0C0007F30A48F669E398CF975C5DB18BFD726F3
-:10B0D0003A82DF6B13DC8F10AF00BF9E32CDC942C6
-:10B0E0007B65973D4287790F27A3FB1F63D18C5D5A
-:10B0F0002C62BEF222BCEF7060B200F017275AF744
-:10B10000B7CF8672F3C00F30986CD9BDEB9679A992
-:10B1100041D8F6C0F70866054CC67B8130E714D7E6
-:10B120005D847DC111BCEF3A22DB42C1C908A6BDD6
-:10B130007FA7B550DE8D7923AD1374CA39E99072BB
-:10B1400098C786D9EAB97F37E5DFB1793C0F20B4DB
-:10B150007DCCCF1EB5FD05D07EEED768DFC4C79F7E
-:10B1600080AF40CF24E0F8310E8EED237D3168149E
-:10B17000DABFD29EC47C0770FF06FAB308BC3F3B1F
-:10B18000E6A524306D1EC2507F76E86FCAFFC17CF1
-:10B19000960FA787FE6AF458F1F5E8D1AA73D37821
-:10B1A0007D532DE407E13D56785F9D59E9CFACDC36
-:10B1B000DB85786DCD0FE215EC406A17AA375F5139
-:10B1C000F08C7986097603E17934BC9DB2F3BCA892
-:10B1D0009DF6087F73FAFF077A3938BD42FB437B3F
-:10B1E000F29AFB5B01FDC55D7B7F885F5C3F43F8A6
-:10B1F000059A6C4BB876FCC2A87CD782DF53D0AEE0
-:10B200002E04AFC1FCA347ECE81798F51E13E663C4
-:10B210007E6B7634C9EBECB8A526CA47885F4AF93D
-:10B22000C56DD916CA876FCBF886491FA2A7DBB2B6
-:10B23000ABA91CEA53DE54762002C3146C0AEBA3BC
-:10B2400038C0CEA27207FA85BE7A9E87A5E625A9E8
-:10B25000FA9029FB9F342FF8306AF6F18153507F22
-:10B26000677D2EE59D4545FF95F2AD76D53A9D5813
-:10B27000FE9899EF637E57D9C74246A578DAD4C2C3
-:10B2800027703FD735A141A0FDCB8D57DFBF745D3F
-:10B29000EC2BC3BC2D56C3F3B21CD552983ED4AE92
-:10B2A000DB5D88579E3FE517387E35ED3D3B3B9E85
-:10B2B000F0B633E320C3BF3BF41CB4256AD7970E26
-:10B2C000F398C2D7A36470D33D63AC4147E348C64B
-:10B2D000D4005071AE290B1D35F03E65AD44F7F931
-:10B2E0002666DF4BF94C60E593BD919DFDCB328422
-:10B2F00087CD738D761EE1F30A1FB77ACFB14A2F3F
-:10B30000D7456724FA57AE094B29DF8C7ED4F52E3A
-:10B3100086CD07EC61739C8EEE838BC8089917D39A
-:10B32000D453FCB77F2EFC18E82A5A47E1FB62FF92
-:10B330008F9F1B3232A7C940DFA9E76CF87EDB186C
-:10B340005C3B48F734C6F3BEC3BFCFE7DF3307DF4C
-:10B350007F334630139EB3113644501CD368041813
-:10B36000CFE128F78D3DAAC4DB9A052625B942FB1B
-:10B370000B50DEBC68BA2103FD8653A665763ADF22
-:10B38000A6F851FA680FE52DB2AC188D3F7A4A390C
-:10B39000A7D6705B7A22C6EFA2A0AC0FFD6AC9697E
-:10B3A000427AAB7113DBF8FE6FA21E3F3B5BBFCA54
-:10B3B000847A1B9DE042C62EBF70653FDE33ACAE83
-:10B3C0004FE320BFAF630896EA292FC43898A679C7
-:10B3D0001F50FC301576C749E5141F2A9609CFA5E2
-:10B3E000CCDE8ADF95027234F70328F77F0C6F3FBB
-:10B3F00045F33E00FE75E8BEC0E8ED476AEE193041
-:10B4000082BF3372FB9961EDDB476C3FD86EACA60F
-:10B41000DD3689CB0D5F5C847FA4F81EE6FF17C77D
-:10B420008F9EB79655ACE4DB9B40A2E13E94C23FB1
-:10B430003B1CF594C72646F07D533D8811E4A71EBA
-:10B440006B2DCFBF48D1E6B1A9F78BB4E1BD215038
-:10B450005E66D1DAEBA56CA0679A807EAAD65E2FD5
-:10B4600046498AFB532CDC8EAFA77D527D8A562E2F
-:10B47000F4E07A81F9E8ACB97D94F7166FA1BC8647
-:10B48000D1E20B6F3531CAC7D2477AEA51E7959EB0
-:10B490004C1ADB56007014E7B3C527A7AEC2B8D16B
-:10B4A0005B0A3FB7811CA073A40D8907C49076ABDB
-:10B4B0000D8109A857AA75FC1C00FD40FF6FC58FC0
-:10B4C000A1386B78BFEAFD312ABCB25E989D11327B
-:10B4D000BFB794F531D4DF1DC907D0AE1DEACF1830
-:10B4E000C8A3FE86F28A94FE12FEBEFEFEA0AC6FDA
-:10B4F000B5BF957769E7B7D2D047F35BA9DC5BAA04
-:10B50000F6F7079C5FFADFD19F920F36D4DFB7B40E
-:10B51000F35B69ECA3F9AD1CF22F95FE12FEBEFEA3
-:10B52000D47C07A3B1BE16F969B4BC0735DFA1D03E
-:10B5300091AAC97700CF6661A9C4D88302E78BEFCF
-:10B5400014CFFA1EF2C5E5850D4EB253147F8FCE8F
-:10B550000789743E88F4E8E2146E87A8ED1F692A13
-:10B5600060EE893C1E84CFAC2281CE1F4C2A10DCB9
-:10B57000B8CFB60FE407DE83B71FD63996FB9B1C06
-:10B58000F43CD824D3F310F8976E8A7F39090E144F
-:10B59000737FF1C1247BD51AB43F4A2378FE75D15D
-:10B5A0002CB06C83FE1BAC975366CC73BC89E5E072
-:10B5B00039B4CC0E8ECFB8F204BAF73E22E7745FEE
-:10B5C00013C03B0A4419F3CA77C823C7737E5ECC05
-:10B5D000E3443B94BC491F9E9724A502FE24CC7FE4
-:10B5E00095422A262EA4F3368BBF154DF64DF5371E
-:10B5F000FAAD7618C72D42CE6F32001F7F54EC9BF8
-:10B6000055690B481E84FBA771A8A972319F50F49D
-:10B61000FBE1D765D665E4DF2EBB91B118F87E312A
-:10B620007E077AEA578A7DF45ABF91A1FFE72BE79C
-:10B63000FBD7B7DCABF54B1F3407EC68173E98130C
-:10B64000C7901ED55BB5E53B0C7CBD2D0BF35317A6
-:10B6500087E5FDA8F720EEC05F6732D655ACDCFF6A
-:10B66000A2E4FDDC85721EE338293194E4AD9ED35B
-:10B67000341AD988FB926A7BBF53E4168B73131E6E
-:10B68000D43C39263E9383DFABFDA9DF3D2A3C93B2
-:10B6900074B5B829D88167FBB3B8BE477BFD3F8A34
-:10B6A000B5F94997178EFB4E391B896F07248C53C8
-:10B6B000A8E3FFDFE2D71DC57CBEBF9AF3492E3F4A
-:10B6C0006797C242CFD7A9F95FCB866089EE15563E
-:10B6D000F3FF9863201BE9FD9FB3239DF711FF291A
-:10B6E000F648E04DDD95C8AFDFDED0381CEE54CD16
-:10B6F000F955A5BDD1F03CDABD13F413921FD9D290
-:10B70000EC74D079BA78BECF3626AEEC3C9EDFC260
-:10B71000F27735FCA53DA7D5D2FD94807ECB63782A
-:10B72000BE4D1FEC17E3C06D166CD7CFE34A81A75F
-:10B7300028FE9B521B105AB383E781C2E562CA46BA
-:10B74000ED79B3F0FB142B2DFD922063BC7F80CEEE
-:10B7500031CE2FE1F4A23B3BB05E3CB727C5641D60
-:10B76000CF17192B73FB3263202D74BF636A899244
-:10B77000671AF9C65619446F46C943AB306FAA32EF
-:10B78000EA8DADE9288A4BF6AEC23CA9CAE4373E41
-:10B790004907793BA9E4610E4F7EE39371004F2E78
-:10B7A000F9570ECF6284A42925DF5D85FBAA534B90
-:10B7B00094FB95581F9DDB4E4CE27CF4F73E45A36D
-:10B7C0006EC47539A3448D5B323AA7ED39F18B33E2
-:10B7D00028A73C6A9CD7ADDDDF64CAFD8937A8EC99
-:10B7E0001567237B6901FE0EF8BC41B97747670AEC
-:10B7F000105E2706EF3579F8EBDCBB133C27CFEF63
-:10B80000116A69645EEDFD886E85FF79DE903A1EEF
-:10B81000B5FF61E3C2FB016342C7B58FDA51C7F5DB
-:10B82000718ED1274C0BEED7AAE3FA5818D88F4166
-:10B830008F033D7D3548D78FAD0369F8774E60990A
-:10B8400079098E1FD82F3843603DA7E3CA921F9114
-:10B850003D559CE45E5982F97B067E7F41BB624781
-:10B86000EE8AF7FAD0AF077EA3BC4D5F2A3FC750E0
-:10B870009EABFD7B6CEB4BB85DFA27E55961DC5361
-:10B88000FF7A2EDEA72EB066A8BFF9F3CB06F4FB35
-:10B890002B4FF0BFD7BAE9F83B06F4DF37210CEDA8
-:10B8A0006CDA6718F1EFC17D888709F8FAD5F82BB3
-:10B8B0002FA566B6C5C17836ADE1F76437FC34BA5A
-:10B8C00002E1861A9A255B5174B4023F5BE9E96E86
-:10B8D000C3E72AD6FF12EE4B5479B57EC4376BB559
-:10B8E00076FFCA7AADBDBE6A0F5007F4DAAAC6E485
-:10B8F000B0FBFCF83D81550A3DAB1CBBFBF0FE8163
-:10B900002A16764FA08FC791BEC967004F6D7CA4E1
-:10B9100012FFAE14CE63A34871DE9752B74B78FE88
-:10B920006D733DBF9FACA2EBA281CAA11EEE2B2579
-:10B930008CE1F7E1A9F253D5EFDF7CE1801EE3054E
-:10B94000E1F705AE5A3E8FEE055F2E6FE0FA7DEC13
-:10B950006F2B62E07DF83D80D55D5CBF57370A7E76
-:10B96000BC77F79BB55A7F6025EB6B437F6665BD5F
-:10B97000F6FDAA462D7CA444D1BF93D9645C1FCFA9
-:10B98000960812AD1705BE90FADBD702C83F499E54
-:10B990004EE4B78D86C054D473E5495E82D5727883
-:10B9A000BF89EB21AEFF75B09248FEEA79DCC25741
-:10B9B000C7EF67FBE6307B20C45E1087C3EFA9F2B8
-:10B9C000D3ECD94A7ED80B02FD7DF072C92DC58417
-:10B9D000F8C9E17CF8BE223F5F63FDD938AE4C6404
-:10B9E0003AA04BE632FEF79F335FACA1BCCACCE96C
-:10B9F000825347EB58C71AF15E3190172817D0FED3
-:10BA0000C4FB3232C5CEE524A7A719ECFCDE1D0726
-:10BA10000B5DFFEEA79880F9823874DAC74DE9A56F
-:10BA20007B371675ECBE88722E63BCDBF5208C6FFD
-:10BA30009772AFF6AE9F0A64CF6ECA7E99E4612218
-:10BA4000B005F6BBC9A1C8C52EED7D188928A7F0A1
-:10BA500000CBC26CEA3749DD7F50F37A036574BFCF
-:10BA600054A2D2EF971532FF7B7B1B3A059C772AB5
-:10BA7000F335631CEAD7280BE3834F759FE0C6E0DC
-:10BA80003EF97AA4679DA39FEE8751F7C947A8B7EF
-:10BA9000A5247E78BDD1E4EFFFF5F37F007E0B583F
-:10BAA000CA008000000000001F8B0800000000009A
-:10BAB000000BED5A7B7054559AFF4EF7ED4E7712FE
-:10BAC0004227813C0C819BD72C90109B8420E8EE70
-:10BAD00078BB3BC984D7D8E1310642A49909BB5150
-:10BAE00092741474A3656D1A616207DD2AA1D045B2
-:10BAF000CB3F1A4A5CA756778366B1D186ED80A109
-:10BB000050519B151D184B2AB0AC23C50089382E07
-:10BB1000CEB0C37EDF39F7D27D3B378A535356ED23
-:10BB2000EC26953A39F73CEE39DFFBFB7D171430F4
-:10BB3000C15C80071C002003D499AF650C5760FFDF
-:10BB400040492E607B9D7EEE1CDB9A6D26906DC079
-:10BB50007FAEE39FC5910AF2F4787FD1F46C5D7FEC
-:10BB600089B34037FFAE7925BAF146A55C37BEAC44
-:10BB7000A15AD75FE1BD4337FFEE268FAE9F92B744
-:10BB80005037DF2E2FD5F5D3A6AFD2CD9FE0FCA93D
-:10BB90006E1C26F5E7792700586D81611FD221C8F8
-:10BBA00000E665E1BED6F4209B08509E8193B14D1E
-:10BBB000ADB6A7531B9C9D126519D8DE925149FD65
-:10BBC00094B71FCC8BE236B6892FDB5CD8FE130B03
-:10BBD000B9B3710F2493AF1FE938F351504209F400
-:10BBE000FC3B8F09A026DECE517C77BAB0AD7849F8
-:10BBF0002E408EE04F6CA67716AE4FC57FE7E0DF94
-:10BC00003E5B684F11C0ADB827CC8FEF03F5AEF99E
-:10BC10000AAD7B54590093B01F064719CEDB6D0562
-:10BC200085FA817D56BEAE223C6C52D2E3EB86147F
-:10BC3000C6DFFBB4D7BD80F6EF8C3007E0BCCE9DED
-:10BC400067AD7205F50733146C2BBD67AD909EF898
-:10BC5000FC8C959E774A23A90E6CFFA5DFDC103281
-:10BC6000909307152BDFFF4821B6788E9607CDA15C
-:10BC7000143A3B288B5D286F4D20E4AD65EF48D426
-:10BC80008CEF6FE960CE003E6A92EF5B0C4857F094
-:10BC900059CE0E23C96DF87BBD18CF999FB11B6E8D
-:10BCA000E5EB017200D608D6C1AA79510BD1ABB928
-:10BCB0004DCCD7F8B96679FD795689FB76253D9F3D
-:10BCC000D23B6ACEA0F5D2D9614D1EF0DE3F53269D
-:10BCD0004CFA2C0D3BE55071BD04E0A4D76478AF5D
-:10BCE000CD1E0960328EFB3C9CDE4F23DDCC8CE800
-:10BCF000984C2741BF6FA3CF2BC4EB043E25CF0B3D
-:10BD00007A049F5E61D0D49F3E76FC5DE2239E67FD
-:10BD1000378B558119C0EF4DE572DA6C5BBBFE5C69
-:10BD200035D1FFAB5E46F4FF570629B8FF27836F76
-:10BD3000E7C824E77B877286713F7FFF500EA09C87
-:10BD4000B55BE44DD2242E07CE4DC897CE70949F9C
-:10BD5000BFA3BF7A909E778499D38E47F50F8CD678
-:10BD6000F37BC270AF239DDE6B7CAE6D8A899FEB47
-:10BD70007945E6E7F7FBF09D93687D4A28C488EF94
-:10BD8000C3562E17FB193C85FDDD7DB6A690C13E3E
-:10BD90007F4FF4C6F56FF55941423969C7F5748F85
-:10BDA000238547AC36929BBD782F46F738BE228D4F
-:10BDB000F6DF680199C5CF77B130769AEE7FAAD5C4
-:10BDC00002017CBEB9D5CCE97D6AA399EF635EF729
-:10BDD0009FBD05D85F89F29782473DDC7AE548012F
-:10BDE000EE7BAA0DFB785FCF3A0BD7BF95F7333EBA
-:10BDF0003F597E35797D4E95CF953EBDBC25CBEB29
-:10BE000018396DFB6E721A8ECB69E57533E77B5D71
-:10BE10002EC9CFC3E0DC43FA73EDB02517CF5BDC4E
-:10BE2000EB703E86FD59E6D0CF73C82E1C16E3B3E7
-:10BE3000DB7731615FE45574AF82A015B63292238F
-:10BE4000C1AF77895F93E96A232C8DF4558A1593E6
-:10BE50001DC2572BC4E7572DD0B4B7829E0BFB32BF
-:10BE6000EBF5BC5D5B13E4F611551E35BB576E0553
-:10BE7000DFDE749ADF7F4B23EEF30AAEA7E753D5DC
-:10BE8000FDCA4A46EA1BB1BDA0083BF8917A0EAD47
-:10BE9000FF0F1EB11FB4A396211D97D804DD17769E
-:10BEA0004757D33DE64EF17D42F66FF1D48FDB016B
-:10BEB000ED44B0F89D0A1F9D0F9C269AEF57E97E2E
-:10BEC00078FEAF9FDF80F7B5CF48E57C6D3CF46C22
-:10BED0008CF8DC592A01F1DD5E3627D767207F5ABE
-:10BEE000EBBF5A04BEEC78BF33325AAF18E8F57690
-:10BEF000F5BCB3ACE2FE104122E5737B2CCDAB8ADE
-:10BF0000CFD3EE0FF018BFA7BDEC05CEA70DF7C33A
-:10BF10006C333FF136BE4F73FB71B616F7B9DBA237
-:10BF200058D291CE1F4F6C5A7FAE0CE09D1E3491BB
-:10BF30007891633D36F0FD05C0FB3D0EDE8FF5E4E4
-:10BF4000F1FEBFF7C8BC9D31D5FB0705F759F15687
-:10BF50005719D1EB70E1335E37BEE7F2310BA7031F
-:10BF6000809BD369832A7B572266B0E1F89501163E
-:10BF700002163FFF3D570BC087F6E457F43E5CD8EE
-:10BF8000D1FD21B773CEB6D17A399DE4EA4C2FF5B5
-:10BF9000FDDDBFADA7B8E134FA09922F7F98411EAD
-:10BFA000EEB3FA6A365FDF113E6E95490E4C23F50B
-:10BFB00044FFC041062497FEAE516E3F9FC77B29C8
-:10BFC00078EE1FBA32F9FDFD91D926C1CF39224E44
-:10BFD00051F93F38F3771964BF6CDDF20777101F12
-:10BFE0008F9A391FB7BA47321C067C3989FB428ABF
-:10BFF000383FB5C9E34DD6409913D735A9729B3C5C
-:10C000007EBB4BC82552D8427102FD30A4DB6A5575
-:10C01000BE5AF02A13315E581D66D154D4DB96887F
-:10C02000E7BC446D1783B33A7B007056D367F3F8CF
-:10C03000F276B36D27ED5716EFAFF4E1A609714E16
-:10C04000735B1A39D184F707F83D520A4B737DDFD1
-:10C0500010DFF987315E437E75622024A3DC775CB4
-:10C060002DE7EDA5FD8FCBA427B6D49167C82FC0CF
-:10C070000F4C8E3DC8DF8E803EBE2953F5A0CC23E9
-:10C08000E8B6D4C5A4CFA673BB554EF7AECDF7AD79
-:10C0900070E1F3DF147E9C7188D4DB1AAD04E3E712
-:10C0A0009D80FED846FA84EF2D47FEBC6A70EE995B
-:10C0B0001EF72A8A9FA6C2535CBE01E59BE42AF9BB
-:10C0C0009EEB5CE25C9A3EAF3C74DE4AF1AE3F6CA4
-:10C0D000ACCF351ED73A3A4F1F4083919F2B57FD67
-:10C0E00073C74EC6E9E5DF99CDE97411767ADD288C
-:10C0F0009717F11CBB512E2F7BBD6999B8FEB2CFAB
-:10C100009B96951ED7FFCE9D697C5D5FE9D2ECB50D
-:10C11000D87F4495FB4B618F8DE87CCF4EA177DAB9
-:10C12000FB4E47576693FED45846AC4E1C9F1239BF
-:10C130009341715DCDFE65D9A47FE39DF33EB7B811
-:10C140007747F786F5E7B2853C98519FD6AB7ECC12
-:10C15000FF58D44AF45FDF0D5C7E07F77DD249FAC1
-:10C160007B2992E620BF77F1405A80ECFDE58329D8
-:10C1700021136ED54EF28EF6ECA265F8C73C7EDC3C
-:10C180006F7604709EFFE08567481FFDFB501B71B2
-:10C19000DFF591C747C9BFB547169C97A87DF9FB46
-:10C1A000D5878EEE87F87DB5FE851E9B4CF6F39203
-:10C1B00024ECC4FAF06B3C9E5D7FED4AA5B782EE9D
-:10C1C000F9FBB964CFFCFF76652ED931FF9B57E6AA
-:10C1D000D2B8FFF5B42EA3F8E4798F99D355F38F35
-:10C1E00045272425715E9DAA07455B9E6A2846FA6D
-:10C1F000D51C5FEE34CB09F25566F2D2FC9A8F6AF9
-:10C20000B3D725ACDB12931AE8F99CE3B569AD0905
-:10C210007279BBC7A2DA21D46AB43F2B551AAECCCF
-:10C220007B3266AEA4BE1450E308769DC7DB204B7C
-:10C23000C8E766FA0F55B12F26F17826D0660E951D
-:10C24000E17873CCA4D82B691CD725C41900DE452E
-:10C25000B388DFF74E766E95B9BF871EEA3F5C164E
-:10C26000227F0F01DB5069421CB432668AA6A0DC33
-:10C27000344552A2140FAD8C4967785F8D8F4E3BC9
-:10C280005EFD7931F0F8E85C629C83F1D0397DBCC9
-:10C290000413E8BC5ABCF431C55518CFB66C8C5A9F
-:10C2A000C85F619CA49BBFA6E947E7290F5BD3AD9C
-:10C2B0007F5E14934C4BF09E4568EE880C7DB11D5B
-:10C2C00036D20F2DCE247E0D18E8FB4FDD429F3570
-:10C2D0003DDA1233713E6C89B96DA5D836ABE303F4
-:10C2E0000E130470FF2D91657B186EB6E5DADD69DB
-:10C2F00044AF2D2796C263A4EF0EB7AD8CD65DFB7D
-:10C30000916D45455C3EC6D80FB7B08FF178C0D867
-:10C31000CF4D51DFFB7DF9BB3CF79F87BFC3BC7A94
-:10C320009A7B32CFAB9B293ED4F2EA643FA1D95F1E
-:10C330006DDFBB547A8FB5BFE779FC82F92FB7BFA9
-:10C3400077B9653E6F4AA4319BE7C5279667CBE96D
-:10C3500063F72F919CA6AC8AB1FB6BF19A3FA00CBE
-:10C36000D9288F51CC5C3FFDCB598851DFCB789CCD
-:10C37000ED5F6D09D1B8769ED872C6E7AD70B29008
-:10C380009DC5E33F2D3EBC313E07C78BE2F1A216AF
-:10C3900017C6BC8CE741CB150B1F9F31D557EFAEAD
-:10C3A000A1FBD9F9F39AF9625FB40343941FDDFD51
-:10C3B0001306DC0EA8F1A2269FC9F1E41791928919
-:10C3C000DF841B3DAFCAA5A65F5393F442F3538F9E
-:10C3D000B8047D3AC94F57939FFEDA4A7A305EDC43
-:10C3E0008D7E7A959BAF03BE7ECE4792D728EFBE57
-:10C3F000A8FAFFFB886FD84E89BDE5A2F316426C00
-:10C4000013E58BE3F9CF856A1C33DEF8232E91AF59
-:10C410007C9B1E3FADDEEFFBD2E36D6E71AEFFED98
-:10C420007A7C23FEB31ADF73A6C7F51CC96FAAB9BD
-:10C430002BE622BD7B17F54E1E3BEF2E2D9F944021
-:10C44000C79FA142AB89F21E7F9BC0018299F20770
-:10C450003C3F79DB0CB4CFFAABF93C4EBBEF6A261C
-:10C460006F83F920FCE883451CB7B9EFA5E31605F7
-:10C47000D7376F64B3090F6A6ED3DF273859E138B5
-:10C480005BE000E3F17230BFFF08E955604F894C73
-:10C49000FBB7D065090F69CB0C6D26FC82709C5BE5
-:10C4A000E9796A9C0EF89E0EF5F91D2ABE034971C2
-:10C4B000C09B83A738DEE31F6040FA6B8DA0FD2090
-:10C4C0007B7254E01D9D1161173EEFB6737BF2B98C
-:10C4D00024EEE1EF66A14D2C1E479C8F6CCB213DD5
-:10C4E0001B134F28184FE4C4E3898E173EE2F63041
-:10C4F000397EC81A10EFF1B79B4384C70C15CE657F
-:10C50000D4EFC07C3097E24459BEAB409C0B42DC78
-:10C51000AE283A9C64F72DC2EF7F71F43F781ED9A4
-:10C52000BC9F41368F3B9458694E3CEE58135CC813
-:10C53000FDBF1667AC997664A880F653E30C07FE3E
-:10C54000127E981C6774868F5B282F18134F24C5A2
-:10C55000119FB9F5B8E03449E0ACD322CC4178D290
-:10C5600034959EB7F5A5F2B8B8FED3D66CD2738DCC
-:10C570003F971A05BF2E9DFAD245EBE67E2A39C8B1
-:10C58000DEBE796AE38705A22FDB645AB7318DF2EC
-:10C59000904B9F3E9046F47C135B407D7DFDA464F0
-:10C5A000881F2E57ED11FAB7DF73FFF6A88A1B4BD1
-:10C5B000E8DF26C4F197E4751BD475414C3338EE9F
-:10C5C000B81FB8FC06F37D0B79FFD962D8C3711F81
-:10C5D00021AFAF45321D14EF95E365BBD14EFC731F
-:10C5E0002A6CB157913CFBDEE1FAF1AC89CB2FAE5E
-:10C5F0000F30EAEF95B9BF2BC7BFD538BFD28A67D6
-:10C60000A902F132D4B7992ADFF2310FFDCCC64529
-:10C6100068F975A453F994A35F131F2B5341A2FD2E
-:10C620009FB0F8B6CEC0254F0C4ACE4DB4467266C8
-:10C6300037E2BD9EB08BAD9ED88FF28AE742E9E625
-:10C64000E7EAAC387292D633D901AB717D675E7A76
-:10C6500094F033085B7E73432E510E18BDA752C869
-:10C660001BE5A30C14761DF9FB873A59D8859F78F2
-:10C6700081F2A0CDF3BA80F2CEDFD5811A07D902BC
-:10C68000E770FE0A5C31119FE7E6FB96505ED89199
-:10C69000376C1571C58895E28A55E47FB8BD15B829
-:10C6A0009D09E793BDDC3AFD552E6FCDF43C419FCB
-:10C6B0002111DF338FED3FEDD6F64B7EBF2CF2CE4E
-:10C6C000A4F7CFC9FC2287E72FFFFD5F19DC9F4548
-:10C6D000AE70BF73792405621CB71B163875C4C2CF
-:10C6E000F3F5CB98074D4EF067AFBB041D0E453CEC
-:10C6F0005C1E0762B56934FFB4FABCEFC4F2654B47
-:10C70000484E6292B38C9F52E4350331A946C40768
-:10C7100063E8F4D76E033AD952853D4F96CF1C5546
-:10C720003E733CE2DE9E53225FF16F14F50387AA4D
-:10C730006FFE2EC6EDCA91C21CA6E1C8B946F585AA
-:10C74000FD23DCCEB6DCCB9C0179FCFAC27635CF7A
-:10C7500048B6439DE1BD826FC9B86D433DB73B37D5
-:10C760008BDB0265C373E376FA7E8F6A5766091C1A
-:10C77000F7AADBC1EF9BD535DB950BF1FB1BD0F3A3
-:10C780008CC780EF06F3466A0DE86E306FB67273A1
-:10C79000F3FEE626E73D7893F39E566EEE1E176E87
-:10C7A00072DE4737F9DE5F18E92DFC1FAD8326D70F
-:10C7B0003993EBA2C9F5CE94B7D70568EC71F6E4CE
-:10C7C0004894A89BB1AF89A1CA4A992FD8484F165F
-:10C7D000CF177581BE5A5B68178BD747357A9DAAEC
-:10C7E00013F197A36234908D749EAAC46AB3519FCB
-:10C7F0002FCF079E3F5CB68BFA00488EFC46CE3F9B
-:10C8000047FE52B4FB41BB719DE94975BFF1EC098C
-:10C81000D4BB3E257D71505C6EC0C78D2A7EE70873
-:10C8200003C76D4092F397F2F7CAF9E46F26BE256D
-:10C830009E674441D9C5CF25172DE571B45C44E707
-:10C84000DBAED6BFB216FEA088F0BA2CF4BB541FE4
-:10C85000D94675129E0738F83CED7DADB5E27DDB1B
-:10C860002DC0A89E1598C1789C0AC31319C99F565C
-:10C87000DF3866899E5BCB787DE3AA07EFF79E29B8
-:10C880005AB1BB48F085E85B31E0E07597F7E7FF08
-:10C89000E3741F7F8FA8776C7088298729DFC073A6
-:10C8A0006C3850CDE5B7F9D0FC5FAEA6B8B054E215
-:10C8B000741E138FAB79D649354FD4F2AC61CA17C9
-:10C8C00013F28EF45AD378FE30DDC8DE6C67220F87
-:10C8D0000EBC27F2E06AABB3A42B814F79B5827FFF
-:10C8E0006BA3028FD5F2DB4A2564CA413A543F6CF0
-:10C8F0008EA6A0BFAEEE9D6525BB5DDD5B98CAF13F
-:10C90000A5D6BD268DDE467C2F56CFD9777484D729
-:10C91000275E4BAA53B6D65AF9F887AAFCB4D602BA
-:10C920006F3794499BC90D4FFC4B87D9081F6FC1C6
-:10C93000F89FCEB73628CEABD5435AA2B287DE7366
-:10C940006668A497DAAAB6220FC70FDB477BC97FB8
-:10C95000FAAF5D397227C703AC32C557C9FB5EA871
-:10C960001338E26B149010BD1648219A57BD40E26F
-:10C97000FCCE6AB1F37C3CCB02E674EA370A7F5600
-:10C98000D530C9437D589EC9FD71D55139735D4578
-:10C990003CDFCF5AB07132D1E9DBEA441A6E306322
-:10C9A000AAE2213E7ED73A51C7B11356BAF73DC32A
-:10C9B000FA3A9156F719AF4EA4D569FD0D5FEAEA30
-:10C9C000CA7E69A49EF095EA0367789DD81F668E9B
-:10C9D000BCA278FDC83F306AE5F455EB4638DF4A23
-:10C9E000EB067A44FD681FBE9FDA30DE57C173BC88
-:10C9F00081F7A53682F7A5E7077BA6F336DAE3E4ED
-:10CA0000EDA19E79BCAD46B1C9CFA2BAD328AF3B48
-:10CA1000DD5BCB248A53B5BA855697A8CDF7B613FC
-:10CA20009D12EA16BC9F5CB730A78A7CD47FD4E203
-:10CA3000DC8DCFFDC76CDCCEBA226BA7515CF6D57E
-:10CA400071DF3407AF0364F3BC5293874B8AD39EE4
-:10CA500049F980D769A77A41F5E079ABCCED4EB4BE
-:10CA600000F2087F8A5929EF273A283C9E73D9891A
-:10CA7000AEDF8AEF87FF1FDFFF2EF8FE485C2FB97D
-:10CA8000FDA8F29A945DD41E55ECEB12EC439F572F
-:10CA9000E0C47DA5C55CFF76788B335B13F1FC06A3
-:10CAA00091C7652D28B5273EAFA917787E1603AF2D
-:10CAB000911D7BA3D6345E1CF846AD615C645C17A7
-:10CAC000E86B107644C3FDC7D6099C6F9726E0FD3E
-:10CAD00097DE4339C5BC75707F0AF7E75F1D48D9FB
-:10CAE0004DF1775543EBB409D8AF3A990245C21FCF
-:10CAF000E9EA0BCD0D26C59E61544F500A4C28B76C
-:10CB000063EA060D266EDF6FD40D1AA433BCAFC6E0
-:10CB1000E9F78CFE7A421123FA87829467BCD6C16A
-:10CB20009C8330B68E801B17C03CBC45C3095E5742
-:10CB3000767631A72C7F7B7D2147C5193AC399664C
-:10CB400092F396B700E8BBADB17586061EEF57C1EC
-:10CB500053C15AFA1EABD4E4207F968C17909C9058
-:10CB6000FF4FC60947547F34A2FABB87D5F8BE4AA7
-:10CB70008D4BB475C9FCAF53FDD378B8634D9D8818
-:10CB800027B63454F511FF028B4D407E604B83DB9A
-:10CB9000569AB09FB94E7C47B39DEA169312EB1696
-:10CBA000A23E915CAFD0EC54F5E0D7F5C4FF1D1167
-:10CBB0008127F9F304BE597DD07594F43E7E4E7101
-:10CBC000BF1DC8E3188FA39C9920EE0536817B71A9
-:10CBD0009CA16AF19787D2887E5EF45764978E9500
-:10CBE0006E4E277BB258AA6132C7BB6FE0DF844F1D
-:10CBF0002DFBA06D2190FF5F31FB38D17DC56A0B05
-:10CC0000FF0E49F357CB3E68AA17E3BB1E4BA5F1B5
-:10CC1000E9CC6997E979839B9E2F7A394A481F2C82
-:10CC2000A1D3A1DEC48E9D93485F664CF595D4E1F7
-:10CC300079AB1B551C7CB5F0AF2B228D16481FEB32
-:10CC4000EF0E177EC5F3E82B916A8E6F6753FDB523
-:10CC500022EE2FAA0FA01F9AF0A7F34375750E4E70
-:10CC6000CF5BD10FD179B21A459D3099FF6695FF00
-:10CC7000E3F995F1EC28F911D33CA1372C2FEE7F85
-:10CC800065CAAF6F8BFB614718FBB9DF807BABF6E2
-:10CC900029739C38EC21557EC7FD7E23FCFDE0E026
-:10CCA0000FD4FD99E0E06A9EA3E1E15A5EF49E4A4A
-:10CCB00067AD7D5F6D93F1320D27CB5500BABF0193
-:10CCC00027CB251C2D8BCC7605C7EDF2D533DCC0E8
-:10CCD000CDA259A6EBE5384FC5ED34FC2CE79E7E7E
-:10CCE000467146210436917D19B2826BEF24FA6EAB
-:10CCF0008FC126D2EF50238F73869EFB55EF2FE80E
-:10CD00007BC301E620F7D3D17F9CFBE90E8C6B78C7
-:10CD10003C14B92070AA7EF1BD694798294638E8CD
-:10CD20006F55FF5CAB00B71B1DEA777DF50342AF83
-:10CD3000E338D14352224EE4976393B5EF0543C2E3
-:10CD40003F197ED7D70923FC7BC0CE36E68CE2F3B1
-:10CD500064DC28192F7A4AFD0E705CDC48F96EDF1E
-:10CD6000FBEDAB9B30E933025355FCF99447D88572
-:10CD7000261F63B4BFCDE46DE7DFFD1E640EA3EF95
-:10CD8000478FA972BF48C56F5FB40A7978F17616EC
-:10CD9000A2786E11089CF6C5836B397EFB62157311
-:10CDA0009AE89E2A5EBB50A5C78C385EBB83F0DA3A
-:10CDB0001FA33B219C7691CA7F80107F4FE3CED486
-:10CDC00028C51B4F58FAF3481FB5EF8D1EAD13FE53
-:10CDD0002E3505BA8CF4335CE77AB48ECF1B37BF9F
-:10CDE0003C596710EF14D58A7D4FD7E9BF2F4A8889
-:10CDF000D3CFD0BA84389DF793E3F43F155EFBB7E9
-:10CE0000E3E3C555C6F1DA98797B6E12B77BD68815
-:10CE10001E9B55FC2499BE4ABD6687A73838EE781C
-:10CE2000E3FC20EAB92AEE35A4FAB920937F79070A
-:10CE3000AF7F5978FD4BB333C10962FF89F5C2EF6B
-:10CE400068ED4C75FFA0C518A7A951E7FD305FC973
-:10CE5000A8C779E52FE971B359FD7ADCECD6709655
-:10CE6000AE3F3B7A8B6E7EF5D162DD784D6CA66E5F
-:10CE7000FCB69355BAFEFCE1DB75F3EFF8DCADEBE5
-:10CE8000FFD5881E37BBF3AA1E37D3E4DB8512918A
-:10CE9000B8CE63FB996E5E419BFE5E855DFA7B4D6D
-:10CEA000EBD6DF4BDBB728A0BF5F49507FBF2CC25A
-:10CEB000F52BFE785C7F6FADACE2FA25765AB7BDF4
-:10CEC000A1D44E714C6EBE90576DDEFF0085A782D7
-:10CED000721032000000000000000000000000009E
-:10CEE0001F8B080000000000000BE3146060F85185
-:10CEF0000FC1D3F9191836F323F8F4C0C7981918DD
-:10CF00008E83302303C33E20DE0AC46B80F83D03CA
-:10CF100003C352203D07882703711710BF048AD529
-:10CF2000B1623787858D81810D884F02CD3AC54C1E
-:10CF3000BCFD8A7C08F6215E0686B5407C9497BECF
-:10CF40006130D8F00C41FAD9F50C6AD76ED181F76F
-:10CF50003708B38A3330304A20F8FD12A8F26CE269
-:10CF60000876960C65769501F50300295128158001
-:10CF700003000000000000001F8B080000000000FC
-:10CF8000000BED7D09785445B670DDEE7B7B49BA28
-:10CF90003B9D9095257480202A4BCB1201113B219B
-:10CFA00089010306440928D26C2184249D01661E50
-:10CFB0003EFDFF6E0842C4D1898A1AFC195F83E0E6
-:10CFC00004079DE0A0139DC0348B8833E804C70597
-:10CFD00097795F401E204212A338E8F3C9AB73AAC9
-:10CFE0006EBAEB763769B7FFF97FFF840F8ABA55BF
-:10CFF000F7D4A9B3D5A953754F149D9124DD40C82A
-:10D0000025F8A1E5AB0A2124255876489DC3E58182
-:10D01000C1F6B55E1771190979C06BC272BD379D33
-:10D02000B8AEA0CF47EB8AFC1642EEF7DAF1F9E38F
-:10D03000DE122C1FF59662F988D78DFD1EF29663DD
-:10D04000F92B6F0D96F77A8BB0BDCEBB0AEB372A62
-:10D050000BD2605C425CA6AC64423C2F0F1CB981D1
-:10D06000D6D6678E4F9047D3FA5FF5449F45DF1BB6
-:10D070002D17F987D206B9A4286B74B09F8AE78D63
-:10D080004A5E5F80F3F8581DEB67AA792D3B72BFAB
-:10D090002C3286E2395646FC89A564727672C47ECB
-:10D0A0008301DE2343D93C89DDF9DAA0C8F0AE065E
-:10D0B000780F0DE5F825DB270F8A0CCF09FD7EE5FB
-:10D0C000E4F0D23B0F0F8CDC6F0CF4AB7372787D05
-:10D0D0007DA60191C71D0FFD62E013C589105F8B0E
-:10D0E000D19F9DF5FDF9455CF42FC5A763AF79EBA2
-:10D0F0000609F9370DE8B4D6BEFCCC163A4E7BCB08
-:10D1000030A7DE41C8672E6782DD1213DF6E81799A
-:10D11000C4C0B752182706BECD8D916F0BA05F0C0F
-:10D120007C5B02FD62E05B658C7CFBD94F846FF712
-:10D13000021EDF836F1B62D4B75FC5C8B78D31F2A3
-:10D140006D538CFAF6648C7C7B2A946FEA73B5DCA1
-:10D150004124B48B372A253BA09F27B3CD3620EB43
-:10D1600027C1BF3DDF53EFF6C7C8BF5763E4DF11E8
-:10D17000A04F0CFC3B1A23FFDE89917F1FC4A877C8
-:10D180006DB8CE58E4AFDA8610FCB93400FEB5D8DD
-:10D190004F5DCDEB7AC03B89908C7039504BCA51B2
-:10D1A000940799B8DBD9BA55F0CDA51C425698E83A
-:10D1B0007FE9FBBE3C12D0D3F17D36E2AF9584FE11
-:10D1C0009F039E84E47F732955E8EFD345EC4F74A9
-:10D1D000D0FE30C815E5FF66EF102CEBB91C6D2EA4
-:10D1E000D2A13CF8920D285F4F789DD8DEE01D8BD0
-:10D1F000E5635C2E3772397A00E4EE0A90C3522E52
-:10D20000574CEE0829719453BA76EC89271B1C28D9
-:10D21000576609F09499BCDDBBE7CAAD1B28FCCD6D
-:10D2200035BA2BB785C8D91345AA7C51C94C0EF61F
-:10D230007BA2FC846DC150A4B70DE03414EBD47E06
-:10D24000BED07E0DEEEE7EBDA0DF63C55CBE641277
-:10D25000081DF7B1D2EE7EE912A5CBBD12296DB241
-:10D2600084F3658AC4F4942A0AF243E6F4DD9F77D6
-:10D2700096B4D1F76DF6916984964F827EA2FE39FD
-:10D28000B054DFAFA77476537A641A494D13E04B5C
-:10D290005A2585E22B8F7524821C3D34CE45242BE4
-:10D2A00021FDA19D8EDF67741BC9A265E2F83622BD
-:10D2B0000D837EB49DD653787BC650DA4EE13C0494
-:10D2C000EDD6607B2A6F4F73F0F7AF63ED0F7B09EC
-:10D2D0008EAFF6BB8FF2D94DF15B47F1C5E7C5C400
-:10D2E000057494293BFD21F39F2DE971DE95BC5413
-:10D2F000F1BF2FFB54C6FCA1417CCD832F66CC0F20
-:10D30000C1EFBEC173B0AEE263BEA212EBFD57F532
-:10D31000A69E18D707124EE7D49903847687EC446B
-:10D320003FCD71444F7C945F0E2A9E91F8F3051512
-:10D33000E71F54FF5C8C1EDAF6BB3574589721D278
-:10D34000C1D05BA4C3BADE221D0C7D2E4F8729926B
-:10D3500003E147A3873AEE862BC571E3AE12C7DD22
-:10D360007095386EDCD53FCCB8EBFB89E31A33C53A
-:10D3700071D7678AE31AFB7FBF7189ECA40F99B953
-:10D38000200EF8679E60DF2E10F7C3A0DF60E7F481
-:10D39000C9413B27DB4B88DB12E42791E9CB39A15C
-:10D3A00070EE14EC2A85F37F381CD7E5E1D8357090
-:10D3B000E66AE16CE37048A89D0E8343EED0CEE3AD
-:10D3C000B7FCBD802E647CBABE92126BE87B4ECD5A
-:10D3D000F8B76BC7DF0D760CE6A1BBECF80E0D5D60
-:10D3E000E768F1D9C3E110DDE5E841EC1A38B3B5DF
-:10D3F000700E713801E9B2704AB5F3785DE5AB247F
-:10D40000AC5F941EC382EF75E4759E423FE845C54C
-:10D41000B19DB64B7FB2066EA0FD8F6C91FC465A53
-:10D420000FEC8DC7F5E3FCB6E958DF778D11D7898E
-:10D43000F3CEC97E23B527935E78DB06F6A5EA0511
-:10D44000BD0C75DDDE8F6D6D142F8FB1F5C1EBE86E
-:10D45000F3CE17F4642B4A63A10EE87E8ACB2659DB
-:10D46000C5EA656656ADDAB2EF4E805BDE6C2466C7
-:10D470000AA7EAA525D3AEA3F5258715025DAAB6AE
-:10D48000AF36F4A6F5A57EA909EA1D79A41CF469B6
-:10D49000CDDEFF6C87F5E8FC6E251BC63F4BD70938
-:10D4A00007B5C747ACADA933291E15FE5D85F05EF3
-:10D4B000C54EC9492D1CC577FBA10CC07787E43444
-:10D4C000527A2F6B8C270ED5DED1BFA776EB71FE7B
-:10D4D000CBE9FC0985B784D417023DAB803830BE58
-:10D4E000D3E8374B417D3BEB3D8CE3A9F5AA1D7496
-:10D4F0003CFA7EF5739213A65AAD236EC0B3FD2598
-:10D5000073E9531698E76AC3602BCC6FBD01FA2DFF
-:10D51000F1CF7FD1EC003CB7180A01DFCD5B0C6581
-:10D5200043817E645EC950C0EF2F227E0D7A17CCF6
-:10D5300077F935C6AD7AE0A72530688635DCCE9E12
-:10D54000A5EB952364FDAC20CCEE13D96F983E2C4F
-:10D55000F8FC257D22CAC1B2463D7184DA0D2E1F2A
-:10D56000BEA384F9317BACFEED59413E2EB77379F1
-:10D57000E57C5C9EC8F92A77E6CC18168ECF83C06E
-:10D580001723F38FA07C98AE9B0EF47F1C48BFC777
-:10D59000A8FFE440FFC889CF9FA07E12949BA99F5B
-:10D5A00004E593D44F82D24FFD24E8B795FA495051
-:10D5B0006EA37E123C7F9AFAE7503652FF1C9E3FC4
-:10D5C00043FD7228777A7DF8FC396F1D964DDE7A1F
-:10D5D0002C9FF73660B9DBEBC77E2F7A1BB16CF658
-:10D5E00036E1F397BDCD58B6780358EE053ED332F9
-:10D5F000E06DC572BFF7189607BD6DF8DE21EF1913
-:10D600002C7FC9E96E9B4072652A2F3617B1039BA8
-:10D61000928A5DB9E0AF2495B07AEA1DBE5C03AD95
-:10D62000A7BA699DD2B1776520D748EBBD6B587B0F
-:10D63000E63D24CF44EB993ED63EE097AE3C33AD79
-:10D640000FA867ED8337FBF2E2687DB09FB55FB549
-:10D650003390174FEB5735B1F6E12D649285D6879D
-:10D6600007587DE411D7242BAD8F6C65F59C0F7D99
-:10D67000936CB49ED3C6DE1F7F2E302981D6C77728
-:10D68000B2F6895F937C3BAD4F2412D6F32CB9F9E7
-:10D6900089B49E6767F5C2BEF3654784F57DAFD256
-:10D6A000B6104CDACF7539B932F513F61ADA56805E
-:10D6B000C95DAFBB21571E47E9A79045D0BE49576A
-:10D6C000C4EA06B212DA7FAB9B8EF5FD8A03DBF764
-:10D6D000E8E6B0BAC181ED7FD52DC4FA41C585ED2C
-:10D6E000C77595AC6E7061FB67BA9FE37887143796
-:10D6F000B62BFAFFCDEA0637B63F2CAFCFCDA7FD4C
-:10D700002BF56E8F8ECA75ADE42E2703415E9BD23A
-:10D71000C11EAEE37EEB2C9D03E57E5D8601F56CBC
-:10D72000EF7FE53C857A063FC9502F7B1AFC5E0AE5
-:10D730006715C251281C7DCF70267E33568033F189
-:10D740009B7215CE6A84638E0DCEDE6FC68BF87C1D
-:10D7500053A1C2D9A0A3F6BED61ADBBC265E9A207E
-:10D76000E273A95285F308E293181B3E01E55A01C2
-:10D770004E4059A2C2D98C705262C3C7651827C0E7
-:10D78000711996AA70B6239C8CD8E0040CD789F83E
-:10D790001896A9709E43FAF48B6D5E2EE3F5223E37
-:10D7A000C62A15CE1F109FACD8E0ECB78AF4D96F0B
-:10D7B000EDA64F00E164C736AF3C9B489F3C5B370A
-:10D7C0007D5E433857C60667BF4DA4CF7E5B377D6D
-:10D7D000DE4438C3629B575E82489FBC846EFA7CED
-:10D7E0008070AE890D9F8329227D0EA674D3E72415
-:10D7F000C219131B3EF9A9227DF253BBE9731EE146
-:10D800008C8B0DCEC154913E0753BBE9F305C2B9D1
-:10D810003EB679E5A789F4C94FEBA6CF258493EBF3
-:10D820006E447C0885638D0EE7503F913E87FA7504
-:10D83000D3C7A407380514CEC09EE114668AF42924
-:10D84000CCECA64FA21EF462726C700E658AF4399D
-:10D8500094D94D9FDE88CFD4D8E655D85FA44F61C8
-:10D860007F461F8FB173921DFCC644E2DC4A5F996C
-:10D8700094FCB383B0EE2816E204B047A4C036800F
-:10D880004FD756F44B65A7EA073909F8B9C536876B
-:10D8900013E2017AD5DF21ADB81FB1EC4C14E24D93
-:10D8A0002FE9F38603BE56EA1586FA3D0963E304C1
-:10D8B0007F2BD19524D47B15F516FAA7940C10DA9A
-:10D8C000D34AAF12DA33DC23857A9FF2F142FF7E2E
-:10D8D000357942BDFFAA2942FF2CDF0CA13EB06E74
-:10D8E0008ED03FBB7E81D07E454385D07EA57FB95B
-:10D8F00050BFBAF15F85FEC39AD608ED239A370868
-:10D90000EDD7041E16EAA30E3F21F41FD3BA5568C3
-:10D91000BFF6D83342FBB8B6E785FA75675E16FAEC
-:10D920005FDFB95FA8DF70F1CF42FF5CF237A13E45
-:10D93000C9F481D0BFC0FE91D07E63FA271A3F564A
-:10D940008C5FD4E612E6CF6618D09F0D580D58377D
-:10D95000EC35B3FD0DD493210E518C75C3FE858E2D
-:10D960006488070000EA4FE4F62EBF02E255BF18B4
-:10D97000EFBE02E2B8BF30B847D823F841EDB2FBA2
-:10D980001E3DC6135B25920EA54307659C9EC713DB
-:10D990008C4C7ED767E53CE50BD183BA7ED4BFA023
-:10D9A000F5F57A8AC798A0FEACEF57963E3F649C87
-:10D9B00075FD0CA55B87B2E70B2D305EC97D309EEF
-:10D9C000C7D03918F0D28E631C305618C794598EC0
-:10D9D000E36C84715282E31833CB35E3984AB7F293
-:10D9E000E77C9CC7406FA28DB37EC078713E9915CD
-:10D9F00038CE16CD38EB332B34E3C4B1F9D0E77C05
-:10DA00009CA72E378E71E004713EFD2B719CE7B40C
-:10DA1000F3E95FA919C782E3C0731887F4A5BB981F
-:10DA200034CA67636719CAC19FCC182733F4A9F8B1
-:10DA30000DD4C90766920DE338E8B8B41F199244B3
-:10DA4000859A907FD127217FBE88A3FC0F89A705E7
-:10DA5000F7E33EDCD72FE628123FC588EE93AAB93C
-:10DA60006C2EDA393D73858396CD07063D02E36C53
-:10DA7000B43AB369BDBD7992616104795A5CAF9CD7
-:10DA80006A0B91F3EEFD591E195243C75F116747A8
-:10DA90007CD4BA5A26E9C4E727E8BE8BD0FDC987F3
-:10DAA000749F42E87EE52385ED33FF9DEECFA0DE37
-:10DAB00046F767D04EC86A7CEF048F339FF8A5E421
-:10DAC000077A7F71D7CF145C277CE4ADF4548826A5
-:10DAD000B09F79ABE2291382F8CDF7F512EAD41C96
-:10DAE000F7D1A5E3BE16E3079D2F19FD5B81AE7547
-:10DAF0007D284D79BF0184BCBB77EA21C986D53E1C
-:10DB0000BAB184CCAC995E90865A24F55B4EF19CF8
-:10DB1000B1FB1A85BE41DA95B63B9D96205CE25278
-:10DB20004E007D4CF40FC0B9A588D643C6BFB5449E
-:10DB3000ACCF2272B04EF97D523F80B0F83F1FD774
-:10DB4000E15280AF25748E1994D5B3A01C09CD2C59
-:10DB50005E536A67EFAAF878162A2480FB6B5F0A87
-:10DB6000C4B1892F19FBCD51F7C91AFC4A1593ABE3
-:10DB700084D2B574BE1EE9AAC5F7FDBDF12EDD70D5
-:10DB80005AD63DA24068B627FC67BBC57652CEC6C2
-:10DB900053E9AACACB29CEDF13C07F5A9E06FE5393
-:10DBA000BC4F72FE07E598F1DF63744F03FE776E9A
-:10DBB000D213E417E7FB6D9CEF8BEB45BEDF06E766
-:10DBC00071B4FF6D2BB358BCA9A197C05F3A719196
-:10DBD0000EF50F1550B31A86FFDFB91CCCA9DBF583
-:10DBE0000AB0F7F672CDFC381FEEE47C98ABA1C703
-:10DBF0006D9C6F7339DF9610DFBD1918BFF02B10C5
-:10DC0000D79B5D2E11B0179EBB55BEB5097C73AB7B
-:10DC10007CD3E07B27E7DB9D7731BE69F16EE37C47
-:10DC20006B6BF84C2103C2F1D6E2396F95665E3E0C
-:10DC30002DDFEAB95CDA0DE04F4D77E5AE3819D249
-:10DC4000FF96A2C92B4E86D8855B4BA60BF559A52E
-:10DC5000B385FEB3DDF385F6DBCB970AED736B7E00
-:10DC600026D4E7ADBA4BE83FDFB75A685F58779FD5
-:10DC7000D0BEB8FE21A1BEA46193D07FA97F8BD076
-:10DC8000BEAC7187D05ED5B44BA87B9A5F12FAEB1D
-:10DC9000F65E7933C8D791B7F504E27D179CA731BA
-:10DCA000CE78C1A938A1CF49AF03E5F8947708969B
-:10DCB00067BC4E94F3B3DEB15856834C8E033B7B66
-:10DCC000C002F1534F1CB5FB89741D97C7ADA99BCA
-:10DCD00000EB0D6D1F4FC8BFCA37ACF1F5A55A0058
-:10DCE000716F4AFFE20603098C2254BA7B77CB732B
-:10DCF000A73EA4BDAD87F60699047A85B717B74548
-:10DD00007EDE21750ECE80B8EC7B46B23D24DE1857
-:10DD10007EDE42FA805F11ADFD9C8E94879EF76C8B
-:10DD200095D939CF117DDE5699E2556960FA5FF9D0
-:10DD30007C461EB1413D30B8C67299F19A283269CD
-:10DD4000C0E78182DE2F69B83AA8E704C661F6749D
-:10DD5000A97F94F07C59E375C27B6F48EE2D80C794
-:10DD6000B97D7A5CAF49E040E62DC3003FD7561934
-:10DD7000D6D1E614F4BB5ABDAE15271542DEF41613
-:10DD800061F996B704CB77BCA5581EF3BAB17CDF16
-:10DD90005B8EE587DE1A2CFFDDBB0ACB36AF0FCBDF
-:10DDA00013DE3A2C4F7AEBB13CE56DC0F28CD78F85
-:10DDB000E5596F2396E7BC4D58B67B9BB154ED6790
-:10DDC0004FF27786AFAF67410E8DE1727670EDBC92
-:10DDD00035757D837276582E433953E95BDC60E4F8
-:10DDE000F2902AC8C35F611D4E0179E9A1BD41E1EE
-:10DDF0007218EDFDC8ED206FBD7F047923640DCA54
-:10DE00008105E4EE7BC81B8153841490A73E1A79E8
-:10DE100012E550952355CFDF904ACE817CA97265DB
-:10DE200091993FA4CAD5FDE02746F0B77A2B125F3F
-:10DE3000FF987F4402B93A20D9727E5E417C2EACB5
-:10DE400077F1B16B29B856E827FB87C03AD235E4A1
-:10DE5000ABC110DFEF3A4685202BFAFCB4F2129DDD
-:10DE6000EE2EDC3F94F929F37B85B79BE3185DCD5B
-:10DE70003A524446C2F972CE3137E567DC9FAE1E96
-:10DE800009FB66FA5C264900C7EF9C1EE1BC800CCA
-:10DE90002248E79EE8ABF63FF5C47FE6C0B9BF0570
-:10DEA000F49CCE3DEE80BE86E9EF53CE5B42CE972A
-:10DEB0003C46673AC4C13BB30D76E63F4C12E94895
-:10DEC00026E1F9814AC703D95F0C86F399FBA81CA8
-:10DED000827E750D1A9C402E231F3DD9FB9EE8B90A
-:10DEE00000E61B133D0D04CEB9283DB7C27DC758CF
-:10DEF000E9D9939DECC93E9ED8C0E87C84FBA7D1AC
-:10DF0000E8AC9E8769F1B84591391FB81C933B3442
-:10DF1000F42F15E8DFD7EAC0FE07F77E9009E7780F
-:10DF20005DBBAF48204343DF2F60E73DDDEFE70BEC
-:10DF30007A20FDE9EF99B03F3EF8C2BB58AE254CC0
-:10DF40000F375A4AE62A6382F062BD47106D5E1EA3
-:10DF50004512E7D5837E76A4AAFAD99A09F2B49B32
-:10DF6000DB81B0F9F5209FEAFC0EC0FC289CA920BB
-:10DF7000D3741EF972C95DC2FC46A7E0BC7B9A9FB0
-:10DF800027C140A411143FABC14012A83C2AEEB5F2
-:10DF90000AEEEB9C6D3E8853EC8D77D65296786CEA
-:10DFA00067DF0838E03D319EB1ACD15C23FA4F8980
-:10DFB00035A2FF945113EA3F751D7ECAE6A6F82DDF
-:10DFC0004FD7D79CEC05EB9C8BAF736C5D55F1ABD9
-:10DFD0006ACAAAB10870C47A57BD54C4EEE13812B7
-:10DFE000664638EF53CBE5E9061CE76CE3C004183E
-:10DFF000F7ACD754C3D6577B0D1B37BD26747DAD08
-:10E000005C155F73725410BF68707F68FCA8449001
-:10E010008F4CB02ED2B681D1FB47E5A7FCB901CF1A
-:10E02000D55B942FC07F370F51FD7719EB2A5C4FDA
-:10E0300093DE671C01CF770AE3D1F71CEAD938BC1D
-:10E04000175D6E64724AE5A71ECEBB08DF1F98906D
-:10E05000CF6E0A3181C2EB902D7520577E85E9B3D2
-:10E0600087CB6995A9CDE07620B95B41AE178C5579
-:10E07000E5DC31EB036AA73FFE8B82F7CCC8D714EF
-:10E080007A4EF0AAC322526283A0EA82DDCB8A6173
-:10E09000DDFEF8C59BF83EBD3E07E67D9EE88AC0E2
-:10E0A0002E9D276FDA4685E8EB6985C5B1481DDBF3
-:10E0B000E7F8E81F98DFE27A71DFB3A441AC9791EB
-:10E0C00019A9606FCB362AC44F715F0AFB2675DE33
-:10E0D000D4FEBEABD811B925A4661DECD31F53588E
-:10E0E000BC67819DC87DA8BDAEFAC3AF7320EED3D7
-:10E0F000AE307F573D0F5F9AC4F6831533FD061788
-:10E10000EDFFD1EE51B7518B4BDFF7AF43FF673ACD
-:10E11000716E27E1745F5827E2D713FE5A7C553F92
-:10E1200028EC5C9EE391DC2845BC2FF535B773AA3B
-:10E130007E2419EC42DC274D5357E540E172E0574D
-:10E14000DC56430AE33BF051923B0DEE907E866035
-:10E15000BF24C398E8FD8CD04F8FFDD258BFCE426C
-:10E16000DC1F132A4F4383FDCC41787DD9B862BFB1
-:10E17000AA3F3CFBA28FCA4BC5EF1EB511BA6E7EFB
-:10E180002CD7A73AE9F3CAEDF7DA5CB43C23FB6C71
-:10E19000C0CF8FFDFA88F77D6F31A8F470592488BD
-:10E1A000A771F924753E8C537CB15DB1E33942A36C
-:10E1B0003160A4F259BD7B6931198EF5E3ACBEFE26
-:10E1C000533DD49B457E55FCE6D15407BB27C4E2A2
-:10E1D0004924807E6EF5B6FF2884F5C2433A51CEBD
-:10E1E000B4EFC1F8179350AFE71B12C2DBF16270B6
-:10E1F0002ABCCF7E3CBBEFFF546F8372F269D02301
-:10E200008F464ECAB9DF0AF482FD7EBEC19A8CF6F3
-:10E21000FE5A722DE8BB4A17E267FE6BED8EC78788
-:10E220001FA7789DDBF6179B3434D44E3079EB6A08
-:10E230005AF86F265D747BD24EE531D44FA280F13F
-:10E240003D4733F7BB5B5859A9046C701FA7728B0D
-:10E25000E2A492482A9FD513B89F40DE33FA213EAC
-:10E26000BAECD957DE194FE9BF6C97925CCCA66324
-:10E27000915283FCF1D0BFAB4606F951F1FB570C2C
-:10E280008E61ECF93D4941BE2CDBB5CF408685D38C
-:10E290007152D33E439B25027F9A8E17C27A5BBB95
-:10E2A000E31F06882B7EBC57226959E1EF976F79EF
-:10E2B00005D73DA013F293F3AB9B7F617C0B4C7BA6
-:10E2C0007934F6B3833DEC896FD9B09F4B41F97E29
-:10E2D000EE65B8C7F4BED10974287F6E850DE6736C
-:10E2E0005AAE6172FEEB7B5341DFCB155FAA1D4B2B
-:10E2F000F6BCFCC99FA3FC2D39FAF354F41F882BFC
-:10E300004387B6D99701F35CBCF9569C671971A392
-:10E310001C96FF5A5F02F74C2FC8A46857043DF9BA
-:10E320008B81ED5F4E6FA5CCA5F33C0DF8817D7B15
-:10E3300053EFDF8E71F39FE13DB89FF339D3951012
-:10E34000EB174C8C5F5B0C3A351E6A12E477DBFAF4
-:10E3500056E0D3D97EAE3438F7A074F071BA49973D
-:10E36000285CFDD18234C627E29073F87BD4DE4F5F
-:10E3700082E7D0BF557199870BEF71FBC8C65FC9A3
-:10E38000C7A778C7C1FA753A35B2FFF70F3E3FFA13
-:10E39000D34A42E42C44DF99FE6FBB8FE9BBAAFF4E
-:10E3A000FEE945D0FEF95B4C8FE03D582F285E8199
-:10E3B000346CDF375342FB40F7D991F47C9BC2F5B4
-:10E3C0005C6CA73B1C5CFF5539A1F8CB5242A8BC42
-:10E3D000D07192900FB83F2EDB48DF0FF1CB3C306D
-:10E3E0002EF633049F87AC1B4BB85D38A4B107648D
-:10E3F000734A4C7E74A5E27FFA09D0DFF78C4E9FFA
-:10E4000003F4572981F97FB2F3C03B73A89C7FD2F4
-:10E41000A4EAAD6857B57A5BFEFC1812496F3FB1AC
-:10E42000D07D5724BDA5CF23EAADA50DE5F9FF9614
-:10E430005D55E9D7AEA11FD8C7971DD1E9A8B58F03
-:10E440001B0C8E88F691FEBC4572C2E550953F5577
-:10E45000EE2A7E5BD51FEC50B77CAAF2D72D9FAA7F
-:10E46000FC69E72BD24FDBFE07D06F8AD7EDA64DB4
-:10E47000D3C07F3675128CC3E7CED4E33D4DD3E7CE
-:10E4800084DDD3B8231EEBB3F46DBF079FF083AADE
-:10E4900059C3609DBF9DF814766E5FAFA01FFBF55A
-:10E4A000A54B13E87CE670FADE4EC93D95F2A35405
-:10E4B00096027114CFD932F12524413C59222742CA
-:10E4C000F0B8BD5CACC3CFC4D4209C9EFA7F5BBFC8
-:10E4D000FBBB9647295F4F6413F2372871FF411D3C
-:10E4E000EB10799ADEC2CE313CA325FF00D4C336AF
-:10E4F000B924641FE13132FB7334FF963140BFDC35
-:10E5000059C312989C0FC6FDA287DBB12E9F230131
-:10E51000EC7B57CB40DC17761D5E687547B067070C
-:10E52000B89CBDC2CF613A2C52BD9ECA7D07E9445A
-:10E53000BFC66731478CCBCD31AA769AF38DFEE802
-:10E54000E9F8A55C0E67D357134686F06DE6D48FC5
-:10E55000655B381FE0E744C8BEE2FBD217E41AE867
-:10E560007BC0DC565812217E53C9E93771FF9706EC
-:10E5700058F7F25B7265A063BE452FC4431619B904
-:10E58000BE0E254301AF89FB973E3086CAB1E7B086
-:10E59000DE69A6F3F3B47C6A7047D8DF69E909F055
-:10E5A000C1BFDC6A64FEF2DB4AC962A0EBDBB7B232
-:10E5B000F3DEBF199C5591F04C37337F733629B980
-:10E5C000305AFAE9D1377796359047E9D16561F746
-:10E5D000B5C3E58FE97D975DF2AF96400EF5AC9E31
-:10E5E000CCEE371712F7031324D4F71B42ED576E06
-:10E5F000F3F467E13E4D758B64D7D1F66AB9CD006F
-:10E6000072EC69DE2583DF7E9383B8707F2DD70C93
-:10E610009B1912FFA2CB1ED2EBC05773E6027D3FBF
-:10E620009B692480976BE8A73658FF3F6B19857A62
-:10E63000106D5EAF7BC9B47C05E0307BA69587C2C8
-:10E64000E478A17EEB24D217CE81271ADB5638233B
-:10E65000F02FDFC4E42C66FB66FAFFCCBE4DA0F6BB
-:10E660008DC9B5126ADF2CA630FB9616C9BE2D5F88
-:10E67000ED4803B958BE67207EBFB5FCB5C52991EA
-:10E68000ECDBAB7CDFFB1ABF07DED197DAB71121D9
-:10E69000F6AD2FB56F11E2E45FC46ADF4CFF33FAC9
-:10E6A000F72AD8B708F3359B44FB56D4B21AED5B72
-:10E6B000515FBD705F8998A87D8BBF9C7D9BFFE8F3
-:10E6C000AD58579CF111E407E80AF6ED356EE760A6
-:10E6D0001CB0733798587C33563BD72F563BF73FC7
-:10E6E0004467D5CE2DEF27A1FF122E87CCCE2DCF9C
-:10E6F00062766EF91E66E79667333BA7B56F796160
-:10E70000F68DBD5F3D84BE8FFBC7ACC7EF80FB8439
-:10E71000A58AD344FB173BD4EF276AC684DABB1B18
-:10E720004C32D239CCDE393FC5EF607AB2777F0503
-:10E730007B978D766C10E891563EA60C8A17EEB347
-:10E74000BDFDE5A9DFFE0EF4E5753DDE177A57C77E
-:10E75000F6477BBF3C350AF4EE2113B3BF4B4C8C1C
-:10E760009FED5E1FDAD3494399BE57DDC3E857BD1D
-:10E770005B62F35DA9F73B601DF8EA22EE9FE7EECE
-:10E7800061FBE759C6D69478B897F42F0A61DF7D0C
-:10E7900090E2F921F2507AB102E380CFC7D9B6C234
-:10E7A000FEB2542626F063E71D9EF231F8AFF32E39
-:10E7B000D6A1DF3B0F9EC33909BF27A1DEA398D3A3
-:10E7C000BCEB953E24FC7EC44423E3C3C415927F76
-:10E7D0004B16DC4710DBE769FCFA757C9ED49F453D
-:10E7E000BA90BFEA23C6EFD669E9E164F3AF5AA94C
-:10E7F00017E9512345A407E568F1FCD4E0FCE7BE26
-:10E80000D0B6AE0FB42F95703FA5D2433B4F953E87
-:10E81000EA7E651ED7114FCB2E05F8A59DBF4ABFD6
-:10E82000B079ABF4D4CCBF4EB51F579361A06FEF56
-:10E83000EADC0F8C01F9F833A503C5EBB6D9D96929
-:10E84000A1F6F8416E97A6BA8FE7A73A806EECBBA7
-:10E85000C439E5BB5E49A5F3B9D9953512BE1FBED3
-:10E86000F52B831BE20B07CC9D68DF54F9FA84CBB0
-:10E870007B80C379BBB73D1FD79166C98E7A13D011
-:10E88000D82F7E7FCC730FD3AB03D23FD6F5198D33
-:10E890007485658014AAEB10F081FE776A0BE38320
-:10E8A00007F840FF3B8D741E023A57274BCE00F409
-:10E8B0006FDE752FC8CDAB66FA1CF4B75C72B2EF91
-:10E8C000CB882523F5B2F22947924F0C4EE404D7AA
-:10E8D000C579D02F29DCEF98686C7D1BF09848F53E
-:10E8E000610B09F74354BE0FA17F2E45BAF7D383BE
-:10E8F0001C7FCCE5F355A0B705E8DA69007FC613A5
-:10E9000060EB87DAEE911DF9481F95DECD747D1816
-:10E91000CDE8AD8B40CF9BD53AA7A7A74552E0FDE8
-:10E92000C974FFDA4B82D3AD2F0FA9720CDFC36914
-:10E93000E901F1808C10BD07FB147A3E59DD7C148F
-:10E94000E932652575AF42E80E76EB72F489A617B9
-:10E95000D5CD3F8C5E7CA2D18BBDE6CEBF8C80F83E
-:10E96000D71E09ED03694914F6FBF166E6671C3012
-:10E97000BB517E3B5F53F0FEB9D68E7CCDE51EF6D3
-:10E9800017A1DFFD4D8289809DB39BC9472A1E03D5
-:10E99000981C85DAEF57CD6EE45734F8717C1D8EE4
-:10E9A000E63FA9F51B613CB88FE810C70BF32F7841
-:10E9B000FCA7A779A5F171BFEBBCBACF3349AB81F6
-:10E9C000B0F8FF0A63C8B9D46DFC5CA03B4E16ECEE
-:10E9D00067375DA61FC45F0274DEAFEE7C0AE3BF3B
-:10E9E000E79F393E0DE477D91FF5C444F9DCBED367
-:10E9F0004A02ECDE8501D6D98ADDFA88E72884D47C
-:10EA0000B2EF1C7F6745FB52F1BCD15F4CDFAF78A2
-:10EA1000F1A3E110B76A5FC3EC8CEF192E1FBEB6ED
-:10EA2000E170BE5E21B373612DBCEBB8BC9C7B2949
-:10EA3000BE14ECA4D4C8BE5FAD689AA51843F6E92D
-:10EA400023CD0A8E4BFBE1BD65DF0E09E3E5E1F85E
-:10EA5000AD66F07630FB57D1ACF8E13BD88AC62DD5
-:10EA6000B8BFF5347E6A00BF6ED2EF9E65DFD73641
-:10EA7000EBC5F861A33E60C438A7FEB87138D35B1C
-:10EA800049884755A15E5637F13899267EB4EC7710
-:10EA90007B5EF451D22CFBFD6F6C606FCEB66EB70F
-:10EAA000617CAE91C5DF648B1C393ED7535CAEE907
-:10EAB0003E1E979B7A9A0C0F8FCB9D85FF503D9CF5
-:10EAC0006FE6FAAAC6351B7BC5747EBEECD90B4F28
-:10EAD000C279D2B9E73F7912F0AFFCE6B327EF86EF
-:10EAE0007389BD663BAC7F9E67DEC6F8BBFADEDD90
-:10EAF0005CCEDB77FCE6E927A81EB6BF67C47B5B6C
-:10EB0000ED7B4E67C2F78CEDBBBE4C85F8E6CA3D87
-:10EB100005B89F59F9C2A4B4CBDD3F01F9F4C77021
-:10EB20007EA2E5C781DD7A02DF739E3F6644FFA3C4
-:10EB30003BCEDA54C5E2D70E1E5FDD19F9BC4A8D13
-:10EB40000756EFBEE5E6EB611DDCAD381DF89CC74E
-:10EB5000077B8AABBE45F93A2206FEEDE4F1F3A647
-:10EB6000A911E3AAE7E13F944F9BCC625CF5C2EEAA
-:10EB7000C5FFF604B4EDEE1535AE1A88816EEA795C
-:10EB80005899D9B5CD0CFAF1FC6F318E0D7CA33EAE
-:10EB900039697FF64226C423CE289D77E23DE53DC4
-:10EBA00046BC6754B1E75DD497F6178EE23913E19E
-:10EBB000E751EDA4FB879D1BF0BD8E679B95C56358
-:10EBC00039FD215EEBB0E1731E976572ACC66BA395
-:10EBD000C569DF37B3FB50EAF95CD5B60F0C4413B7
-:10EBE000FF96C602BF8E0BE78AEABCB5F0EC408701
-:10EBF0006B43CF1FA2C5C3B95D0DE3173B7768DF39
-:10EC0000C2CF23BACF1908E93B12CEC7D9B9B9C7C9
-:10EC10002FBD1B89BFEAF9C3DB5AFDF4C776EED0DE
-:10EC200033DEDF8D2EAF9AD9FE56A5CFB9AF23DBE9
-:10EC3000E94EAEEF749DE930E3B9315B67E6F175FB
-:10EC4000A69AD28D7DF7C6F03DC7F781E79ED1FB2E
-:10EC500061BFBCAEE900DA5BAD9E571316FFD28EE2
-:10EC600027C531FFA0BA79DF70B047E7F6BF84F25D
-:10EC700057BDF3B8C147E11C6AFCBDA16D6850DE09
-:10EC8000C18EFB43ECF8B9E7F60D67E72291F3B4C8
-:10EC9000D8387C4F8B08DFB3F35301FE325F93C14A
-:10ECA0006EE9799CB3B26B16CCF76CAB42E03EFBDD
-:10ECB000D9267D913FC2B89FC13A362648A77556DE
-:10ECC000F61D9F3EC9807EE64AEBD863F0FDF84A08
-:10ECD000ABC101FBEDDAD5EC5E65EDFF72A6035F1B
-:10ECE0006A136FC373A37A0D1DEDC9F65CD887DB79
-:10ECF000F34B46835869ED41A24B27E0BDD25A94AD
-:10ED0000E6B0405E2FE6A710D989DF19EA6D854588
-:10ED1000300FBD5D6737475C5F193CC5C2F266289E
-:10ED200076F1BBBFEF900783403E8E6F9D07A353E4
-:10ED30009307A3FCC6FFD7F260F8609C9F401E8C2F
-:10ED400000C677D43C18C93F721E0C882F8D0EC99F
-:10ED500083D1A9C983C1F9F8CF3C18FFCC8301A5A1
-:10ED60009A07E39D0D650590A742CD83716683A741
-:10ED700000F252A87930BEDAB08AD5791E0CCBFDEC
-:10ED8000AB0B42F36064DEBF01DBD53C18CEFB1F4A
-:10ED90002908CD839177FFE682D03C1833EFDF5E00
-:10EDA000109A07A3ECFEE70A843C186BFF50007929
-:10EDB000305E8F77B7C6A544CF83D11CE788290F73
-:10EDC0000685F31EC2899207430B275A1E0C0AE7D9
-:10EDD00044DC98E87930C2F089920783C2F904E1F3
-:10EDE00044C98311864F943C1814CEE738AF287974
-:10EDF00030B470A2E5C1A070FE0BE144C983A185C7
-:10EE0000132D0F068563884F899E07230C9F287951
-:10EE100030289C048413250F46183E51F260503868
-:10EE2000E908274A1E0C2D9C687930289C2C8413F5
-:10EE3000250F86164EB43C1814CE55F163A2E7C1D7
-:10EE400008C3274A1E0C0A6714E213250F46183E12
-:10EE500051F260503813104E943C185A38D1F26079
-:10EE600050380538AF287930B470A2E5C1A070A63B
-:10EE7000213E51F26084E113250F0685330BF189A1
-:10EE80009207230C9F287930281C37E213250F8620
-:10EE9000164EB43C1814CE528413250F86164EB469
-:10EEA0003C1814CE728413250F46183E51F2605060
-:10EEB0003877239C287930C2F0F9AE7930CC814183
-:10EEC000D240CC8381F938BBF360247FEB3C18BF80
-:10EED000027CFF9907E39F79307E8C3C18B75ADD9E
-:10EEE0007F8FC77DE377CB8371265E9337A2873C04
-:10EEF00018B75A4BCE823C7FDB3C1817E2BF5D1E31
-:10EF00000C3ACE3F2E374EB43C183ACBB7CB8341A8
-:10EF1000C7912D632E339F287930122C62FE901FEB
-:10EF20002B0FC6B1F8249C4FB43C183FB97C137426
-:10EF30009B05FBB4E9288AE427937F62B485C70D5B
-:10EF40007FA8FC1330E99C9F52FE09358F41930244
-:10EF5000EBE1FB9CEFEF70B9F880E7A13816350FB5
-:10EF6000857F2AC677978A7928A6703ECE768BF25F
-:10EF70003085B0739429F959FE5AD8AF976BF25087
-:10EF80000C11CFE98BDD47F3293832D529CEE328A0
-:10EF9000978769A59F1E04F6DC3C36721E8A199C71
-:10EFA0001FD3357499C2F9369D97B7C3A739549EBC
-:10EFB0008BCB8FCA40D7698E3619E3F437A9FC731F
-:10EFC00008FC9BC9E16AF19DC1F9376332E39F16E2
-:10EFD000EFB7807F14EFB7CA4721FFB4786BF1D445
-:10EFE000F29F84F23B247F482E11F34F4C3289F973
-:10EFF000270AEC62FE891BD3C5FC13931D62FE89B0
-:10F000009B8688F927A63AC5FC13378F15F34F4C1A
-:10F0100077ADD6E4BFB84F93FFE2214DFE8B4D9AFA
-:10F02000FC175B34F92F7668F25FECD2E4BF7849C5
-:10F0300093FF629F505F58F79AD07F71FD51A1BE38
-:10F04000A4E13DA1FF52FF71A17D59E3C7427B5569
-:10F05000D3A742DDD3FCA5D0BFA7FC036FF1EFA17E
-:10F06000DFE1DF431FE3DF43BFDF43FE8B772C4B42
-:10F07000D785E6BF78DFE2590779098E5B1C3CAF84
-:10F0800040E4FC16DDED51F25F04DFFFF6F92F528C
-:10F09000927FF87C043A2BFB1EB0B7254F674DF9E1
-:10F0A000EEF9086E2D11BFEB9E552A7ED7ADB3B297
-:10F0B000EFB567BBC5EFBB6F2F17BFEF1E11E7960C
-:10F0C000000F6DFE8BDE1697CE0AF692E72908C078
-:10F0D00077BAD9106F2BC2F220E4BFC886785B29BB
-:10F0E000968721FF052DFF0CF92F687904F25FD078
-:10F0F000F20DC87F910DF9337C3C7F461DCF9F51A7
-:10F10000CFF36734F0FC197E9E3FA391E7CF68E20E
-:10F11000F9339A79FE8C00C239E13D8CE5496F2BB9
-:10F1200096A7BCC7B03CE36DC3F2ACF70C96E7BC46
-:10F130009D58B67B2F62196BFE0C552E3F04BFE124
-:10F140000A189FC9B32AA7573FF0C8BAD0FC1923A1
-:10F150001ED884721A2D6F460E7CD397123D6F46CF
-:10F16000777B94BC19C1F7A3E7CD481BFDE3E5CD40
-:10F17000986BF961F266CCAD11F33ACC5B75F9BCD2
-:10F180001923E24A6E41F9E3F238D7125BDE0C9F95
-:10F1900055E2DFE553BA80DF45E982EB750F790769
-:10F1A0000E5A9F1E02FB89AE21575D36DF83562E15
-:10F1B000A2D39BE57798F323E7CBE889AE6AFFF704
-:10F1C0002B581E87B9966F992FA3877C0B07B3BF67
-:10F1D000403B196BBE8C9ED6879EE839E347CE979D
-:10F1E000D1935DEDC99EBE3985D1B9770F7456BFF5
-:10F1F00097AE34B51EC297ED2E546D997F0F9F3B8D
-:10F20000D38EF1998E9DFC5E9C8B38ECA9EC7B7DB6
-:10F21000F0373B9E4F184EF03B7E3B7151FEC4F3DE
-:10F22000E7D2CE7DFBE05EC05A1B71252681B34735
-:10F230001CFA81B00FBBC604F19AAADD9FBEF1474C
-:10F240000AD7DCA2C7FB721D148756F4FB5C89C089
-:10F25000B778F24BDCA7C319DDA55EA1DF756B7E25
-:10F260000F0774490D9E3F15E82DB86FEADACCEE12
-:10F27000B3EAC9D58F4F188DF7C689DF81FC433FAC
-:10F280007519C7B38B106700FAEFB4E2FDD525AF4F
-:10F290002D34C0A070DE1A1A37E85524C6811ACC66
-:10F2A000B6E1706F2F5DBDBFE773B5821FBE88C327
-:10F2B0004D2911E3449F2C283A0CFEF3227719DEE6
-:10F2C000AB482B15E346847F470FDB32F03365C232
-:10F2D000EF75FAD97DCFB0EFEA9BB7209E4BFD9A30
-:10F2E000FB4B8D625DA5DB392BBF9762219698E8B9
-:10F2F000D676C5E31392BF3DDD8CE922DDCC0E91BD
-:10F300006EF14344BA68E966758A74D1D22D61AC56
-:10F31000185F53E9A6DEA7FCA1E89664E3F73C82F8
-:10F32000F42A31A5A2C9473C33E400CAB7561FFAF4
-:10F330005802F01B7E48BF64FF6A7CCB6995C16EA2
-:10F34000A533D0445AC4DE8B077D80FCBDC489FA46
-:10F35000A0FE3E8A78F22197FB8FC8255AAE987E90
-:10F36000F0F802DABA19E46D04FB3D1A18AF4A222C
-:10F37000B89F5388D30EFBA826AFC9B94881734DF7
-:10F38000E25C940DE799762C1FE4DF3B770C25B8FF
-:10F39000EF6F0A7C9E0AF7061E1CD9390DE20F9EFC
-:10F3A000C5A404D6AF59096C7D5DC64B5B028BCFFB
-:10F3B0006C28D111D768F87D4A7ABF44C76BB7BBB8
-:10F3C0005EBB01FCD116763F80D83BDFB81DDB4722
-:10F3D000E1F7E119BAFA6B001FDA1FBF2BEE68F9EB
-:10F3E000C8B630C40EB7373F7225DC6BDDA48BFC8A
-:10F3F0003D73818DFFFE1D7E3F654430DF42816D90
-:10F400000CE6657870001DA77A7A17F25195CBEB60
-:10F4100038FD0F964D41FC5E68911C10AF2BD4DF78
-:10F4200071D3308ADFB8B7657EAF97DD5F1FCDFB44
-:10F43000D79AA9FEA2FDAAFF1BFC9E95974ECA98DB
-:10F440000F71744D19DE13FCA3ADF030F02BC7D54E
-:10F45000340AE429BF2511CF713D1F12277E9AD5AA
-:10F460002ADE07CCE1F7B673DA881F84E2DA63623A
-:10F47000FBB836B17E9D66FF39DFC6F5D4465241F2
-:10F48000EE367EAD9760FDE8E824CE3514DF8E457C
-:10F49000BD71FC8ECF09FA891D5FEB8B22DD8F5980
-:10F4A0006E63FCDB642068BF379559F0DEF9FEB26D
-:10F4B0008AFEE05F7C7197BB7FA43865889F96C009
-:10F4C000BEBB772590B120876B2546EFFA8C92085A
-:10F4D000EB962A77AA1CAAF2975116E78E740FF5BD
-:10F4E000339B8472965736443280FCEC9530FCD5C1
-:10F4F000BE86E2759975DB47D6F4017C3CCD9FE171
-:10F500007D32538BE48A744FE7619B8DDD6F5CE342
-:10F510005B0DF7467E419508EC5486A13E2B127C8C
-:10F520001FD9887EE95D36077BCFC4F320C9F51962
-:10F53000709FA2BD79D2E47514CF27A83EC07AB5DA
-:10F54000497122DEBE2A42F09E2C8FD7F59D46B629
-:10F550006C08F17F37DB721B6D145EA38D7D6FD954
-:10F56000CBED94006FE77FFDC306F03B2E1A917F31
-:10F57000BDB9BFA9BE7780D3675C826B2BBC4FE05F
-:10F58000979F51E3E374DB9C8B46415C9ED23BC466
-:10F590000E06F9E663F951DC04CF3F922C3A94430E
-:10F5A000E27239ECC27D761FEA8DAA07242011C8C9
-:10F5B00053A0DA37A9450A58A9DC8F365902708F53
-:10F5C0002EA99CCE3B19F29A9818BC56F99C18D7D4
-:10F5D000A2F29803CE3DC1ABF3104805F8AADD5363
-:10F5E000EDE5DA44668FD63E24635ED4CD729B1976
-:10F5F000E2A9592E471EA4884C921D78AFA65F3908
-:10F6000071520C49FCC05F2776FB0154C9AFF94623
-:10F610003F2FD2775B176DCCDF1E97E0FE33D06BA8
-:10F62000F8E1CEFDE02E38CDA417BBFFC5ED04F701
-:10F630006B0AF97A37EE3F74EC7BD1C00D24F43BB2
-:10F640002AAD9DD86466EBFCB8EBD9BA37EEBC05A1
-:10F65000D7BD6E3B515688EBD4C8965107E09EC586
-:10F66000C80F997E126E1FECF40FD029E7B04F0F30
-:10F67000F4F9B67641CB6F123075D787EAE01C8675
-:10F68000EA5BC8FB67357664C5F441B5185EE6727F
-:10F69000D4FF1EA7DE1D4247EDFBDD714AC9D4FD34
-:10F6A000DC3110ECC8113DDC0BE9C8A5F3A3F3DF96
-:10F6B000C8F525F173FF6498D7C6961BCD20DF6B84
-:10F6C0000379F662FA4EA2A9049997485C18CF19FB
-:10F6D000493D32C88F518B4241FD41A58424A4C0CD
-:10F6E0003DB42221DE432C493CFF4B00F9D22DA72B
-:10F6F000548E43EFE5AAF2A99547557E6BE1A0052C
-:10F70000CE0721624E4BBDD484878146B2D90EEB21
-:10F71000BBEA5FD6727FAED69CE9C7EF977C19E84B
-:10F720001FADE4FE51ADA5D084E6605F32AEEB2B99
-:10F73000217E42E9B03285D979753E5AB9F45CD45C
-:10F74000137FC83EC12377E27D44CF45033E5FA7C8
-:10F75000B807C0FC55FA5CC3E9A3A58794C0F79D20
-:10F760009C2E3DE39B63877BC1892617598FF8E662
-:10F77000E13DEEA6C04813ACBFF76AF08D01CF6B38
-:10F7800013C684E3295BA2E099CCF0BC8EB8FFD805
-:10F7900046E53767455D6D3CEA15792B3D275CAF43
-:10F7A000B47AA4EA8D1AE7BDB6B2FE005EBBED41A5
-:10F7B0006F3CF18C2E4EA504EF5739F7C4A31DD131
-:10F7C000EAD3E77CFE9E7846BF058A7B06CCCFA3B2
-:10F7D000EBCC043919EE20BD8A2992C39BF5A8E72A
-:10F7E000A435B67BF8AA7FA5FA55DA7EAA5FA5DA1A
-:10F7F00063F51EFCDA04F77C9003A999CA2DC5A70E
-:10F80000D6CEF64B9B6DEE4580573CC53D0EF68D32
-:10F81000430259ECFB5F512FA2E941BC46CE9B024B
-:10F8200032AE0B3EBA2E644BE178A8E30F4A48642F
-:10F830007CA45A0EEB7DDF1CC206AB269837A7EFDF
-:10F8400070E28675ABEF48769F714D02B3BFB50984
-:10F850006CDD52CBCDB692BB51BF65E2338EFCEE70
-:10F860007803AA70DF7C6D82EB2EA087A9C885F390
-:10F87000E863274EF04BFBC84D127C379A54E99051
-:10F88000D83D7312FC7E8BC2EB53ECC8057DED03B3
-:10F89000FB6BE8DF1239CFD8A309EAFD5EE67F3AB9
-:10F8A00049771EAF471398FF7908529FF42A56F301
-:10F8B00082A9E7394E09E8D46EBD0D916EBF2031A3
-:10F8C0003F3D91D14BBB4F00C287FEFEBD7B0D4437
-:10F8D000362791E0EF59D599D0BF8F27CE26B05764
-:10F8E000BB1206F0734C671DD47F25779A128706EA
-:10F8F000E55D95E30727CC70422A52DBF55DC361D5
-:10F900004F45E57A27D0BF7D42D760CC41493A3395
-:10F9100099FCB8F442BE20950FCD8AC00733ECC3E2
-:10F9200043EDA4D53004FCD17629CE09F72CDA9723
-:10F930004A0C5FC9C4F329C9C23CD3E3997FDDC136
-:10F94000EDD53B09592827AA3DA6F3AB83523B0FBF
-:10F950008F11EF7490CE3DF1FEAD706EA5C93FA939
-:10F96000CD4F3969A105EF7F6CDC63C6FD6B57098C
-:10F970003BC7EF6A31A27D8EA6B7696DE688711C20
-:10F98000B5A4F47B0BE897A6D424823D4C9B7BD294
-:10F99000067CD7D2A543F25D7308F645AF2B11BFA5
-:10F9A000BB55CBF4F49B1217D1FEE91993B1549FC8
-:10F9B0003758E488F7CD4F73BD52E5F14A3A22DF5C
-:10F9C0000F9D06793CEF7EF31D1709DEDF6F88631C
-:10F9D000746C886374EC728F4F781AE4CD9781FA57
-:10F9E000B0583D07E5FB7F35CF943ADE46AF29514D
-:10F9F000A62AD0B0608A19D68914E29A3C1B947565
-:10FA0000A342E03BA2C7BC3B12F3318E6D12EFF96B
-:10FA1000DAD9BDE1CF3716E077DEA9648D7930A55C
-:10FA2000475989CE09F183F30BDEB7E9A83C2DE8ED
-:10FA3000D39A03F2FBBAE226F63118EAC2FDC99264
-:10FA400052833F40F996DC400D05A5CB7F03F9D4E6
-:10FA500012800080000000001F8B080000000000E2
-:10FA6000000BB57D0B7854D5B5F03E73CE3C929922
-:10FA70002433794E1EC009E19D108724BC1F4E9E81
-:10FA8000448830BC0485EA8028CF2488D6DFB6DEDF
-:10FA9000CBC444F4A2B745E9AFF4D6DB7FB0A2A84B
-:10FAA000200182069AA41340E4113408A8A8AD519D
-:10FAB00029620BC908EAC5D67BFDD75A7B9FCCCCFF
-:10FAC0004922D8DE4E3EBFED3E8FBDD75EEFB5F684
-:10FAD000DA872EC977134B64CCB7D8C0B64A8C7D71
-:10FAE00087BF1B43ADD96E602C89B196383BB54EAC
-:10FAF000E70CC7D284F07E8563693E63D5D6D85CB7
-:10FB000016876D7F3F8B85F18A58EAD202685BAC1D
-:10FB1000AE5A95B12546AFDD0ECF774EBA3CA48ED6
-:10FB2000E12FD8DF3392B12E236B94E2B01F606CCB
-:10FB30000C4350F8CFED56EDD097F0FFE1FD448B2C
-:10FB40002D20C3B8CCA35CECB0F047BE1B281E4DE3
-:10FB500066CC285E939ADEF846CA652C76721163ED
-:10FB600070DFCA5C8FB22CB8318CA99E18C6A2D89F
-:10FB700033F6F3D98C19F07D584757F3BBFD7C0061
-:10FB8000C71FFEE54A0C83FB1F29C118570E6317D8
-:10FB90001E3C15E3B6C1F507E5723FF46F4740C65A
-:10FBA00087F0926F870BA3197BC4EE1981EBBA63C0
-:10FBB000DD7F8FF1DA42F7D903703195B1157E19E7
-:10FBC000E7E6F0C27FABB65919B384FA95F509118F
-:10FBD0007DC018E1B5D2CCD6D4DB7AD26305D2038E
-:10FBE000E65DB17D8B295DC5F9BD93ECD0BFA0C0AA
-:10FBF000AB80EF0B0D317E5F66089E25DB4799D207
-:10FC0000E1D6474D6616807530A5DDC86C84B50A0F
-:10FC100009F0E61578D3C379B8C54AE3DDF57F6509
-:10FC2000BF1996BA18E67A201E9E6F5A51C1727B90
-:10FC3000AEE3AE3FA8652940BCBBFE4D623E953F9A
-:10FC4000FF601E3CFFC0235F20DDF4EB5CEC337EE5
-:10FC5000D211B16E376300CF3241EF3B1F8DBCBF75
-:10FC6000ACE9311A6729F39A909E776DD4DFBFE92A
-:10FC700033E4BB654C095D073C5C3E9265453CDC6A
-:10FC8000618F493C0F20038F8DFD0EDEDF7D6460A8
-:10FC90009C37A7277EB5F6E23AE06F33637F5E6755
-:10FCA000A1F6C23A46ED08BB4AF459DD74F27EE48F
-:10FCB000AFAAC65D261CA7C5FFA78409F04861D37B
-:10FCC000373232572173DF7B0EF0F92326B3EF0072
-:10FCD0007FBB19E79FF546CF3D48AF1BAF96D37D5D
-:10FCE000FDFA1769FC7F249EF86711AE3B17AF2B16
-:10FCF0005FF6B6AE9FE2BA809FD95858977CFDEB6D
-:10FD0000D2D6A3AD4FBB5F2903DFF5F2BEC6EF230A
-:10FD1000843E58FADCACF569808ADAE6CFFA7710CF
-:10FD20003FB1D328BF1A3F2D1374D2F38D46C76E4F
-:10FD3000FE68FA775A9F463FE07FA7C1896DC06988
-:10FD400018D7934FF47CA1E7834E63477F945F3DC0
-:10FD50001F744A6C416FEBFA37FB405AD752D55D9E
-:10FD60006687FB7731CF7A3BAD67235DBFA06C3CE4
-:10FD7000FC3394ABE7385F77EB3933973776DCE8C1
-:10FD800047BDB936464D71D804FD80CE9DBBCC3EF3
-:10FD90007C4E9BE7FC3AB77B9011F15E4EED9FD70E
-:10FDA00079DC830687EEDFFDAB2BB12ABCDF358C17
-:10FDB00095A3DC77C644C2BBCF2E133CFB900EC884
-:10FDC0007F4AFBFF7C803AE9B9F631A847CF7FFB39
-:10FDD0005FB11E78BEEB5B73796FEB3C2DE807EAF1
-:10FDE000E5B413F8EC762167B73755125D963C33CE
-:10FDF000CB84FCCC1EE0F8B4C01FEAD7B6A8D86705
-:10FE0000711D8B1B24D2237A7ADCE59AFA39EADB5E
-:10FE10003BFD85F47E0FFAB0C789BE77213D86850C
-:10FE2000E831D6A1727854F803BEB943F0CD7965B4
-:10FE30008DC9007AE4FC33806F007995C2DCBDE99E
-:10FE4000C1FE0ECE877DAD47BF8EBEE05FF65CCDB6
-:10FE5000FA3486EB1F654AEB45EF68EBBF8BB9625E
-:10FE600049EF88F5B28E1B495EAB2D7C5E6D9D2BF4
-:10FE70009AEE9C817C51B519E895D973DDA8771766
-:10FE8000F7026F997CD16881F7BA1E905CA86FFB6E
-:10FE9000A283A627EE12F85AB96DF10C349A8B6141
-:10FEA0003E3913F5D1176FC624A25C415FFA1E7A62
-:10FEB00035C91F9B711D8CE37B09E07B8374FDF4C6
-:10FEC0005BB6B9D03D28ECB915FE9BDC83C2F59931
-:10FED0008EAE6CDBACD0F364B7DD26B4C7F10EA1F7
-:10FEE000BF845EEE5BBE60E100E7DA1D0EB26F6CB0
-:10FEF0008D83F46375D31653B8DDD5E44B93B7B156
-:10FF00000E3BF15955E313F41CE85FD501FD4A4B54
-:10FF1000C7CF6F55C3F0394ED051AE30A1FEEE4B76
-:10FF20007F82BEF9B2236C9D231CC2AE08FD7B2DDF
-:10FF3000FDA0C1AD1F57D3071ADC1ADF6BEBD1F35D
-:10FF40007D5FF0E9E9C2989FFB0B3AFAAC427A84F4
-:10FF5000F5115E05F0DBD66CF53F04F0B6491C7E6A
-:10FF60005F7314C1DFE92C769F033FAF2A7521B57B
-:10FF700027F0C554F4EB3CD3109F9A3FC70A1222D6
-:10FF8000FC247DABF93779C29FDA1BE5CE07130954
-:10FF90003F4F02F2C3949A8E391620D9AD8EEDE50B
-:10FFA0000A8C3FE5898E3951D05FE8D8C1FB5B3BB5
-:10FFB0004E595C8CD5B057CA4BA07F3BA013C7BB32
-:10FFC000565B60F62C44F95D0D7E9205ECD1EAD3C8
-:10FFD000430EA1DCAD6EAF2897C0EEAC0683238143
-:10FFE0003DAA74C706ACB9D46713E0B9E7EDDE6586
-:10FFF000C42F57EBC86EAD3EAD70B9399248EB5780
-:020000022000DC
-:1000000000F62878AF2E1AFC55C0575DBCC5559B2D
-:1000100049D77D51F1D877AB6AD8758D1EF81EC2CD
-:100020005167606E07B4AD4787C4757C8FDD6E5D28
-:10003000C72A14E08383EB2CD4EAEF179AEC83D021
-:10004000EE151A98B7377DF9A483FB8DC0E4E94813
-:10005000E7AA23269277FCA11F5829F451151028EE
-:100060000EE0A93CCD02D1B1F85CD9E70AB60D1279
-:10007000FB24C25F61A1BEDC37DCD7DB56E17883AD
-:10008000C3F984E3A948912A94B0794B6C51117D4E
-:1000900039C5300CD7C3E468D756C0AF9C6E58B38F
-:1000A0001BD62F0F8016F0A1D85DF2626837164F6D
-:1000B0009197405B6BE476B5D6C09687E3E90581FE
-:1000C0001FADFDC0E1D98A74BFF456FB182BE9AB14
-:1000D0000C3BC9B9586FADE40A50DCD4CA5C5BE193
-:1000E0005A9DEC619C8FEB19F2F11B621C97D9B001
-:1000F00047057E6D747C40FCEB8A33DC9B09FDC0B8
-:10010000131FF17EBAE14A26F0F781273ACA15900B
-:100110000757B6E1CA40E81F7AE2637E7F220C09E6
-:1001200006EAF0139F94FB6C382ED7676CBB3B1B21
-:10013000E7510C12C9A972C0E4AF85FFAD8BE5FC95
-:1001400054073C82FCF786B0B3EB6B8A5EB602FFC5
-:100150002B456E750D8CE3C78069F4DFDF6A7894F8
-:10016000AD068A53B0457CBF29D6ADD18135B8B331
-:1001700067A15EA87767CF8E41BC7A4F225EF3DB22
-:10018000DAA7A03E6E78FBFD31E8AF22BD709CFC83
-:100190003688DD603D975EEBB7450E8B473F7014A8
-:1001A000BEE3003996DCDC9F94543B5B047257EB52
-:1001B00066AA09D695A28BEB1A18D72FCFDB3D7F05
-:1001C000C4F7584680EC4DA1C3FB31CEAF8F5759D1
-:1001D0007B7CAF7A59AFB74CB90FC8E8E7C4A737F3
-:1001E000BEB704F5FBEFCDAEC12AC2E5660F003CF9
-:1001F0003B0D4C61F1C426C394028C3FA35D1B50A0
-:10020000EE5DCCE90339C3308D80845FE298B0B8ED
-:1002100055AC07DE2F61D08E45F86EA0F5C9C857E2
-:10022000A3984746FD3586F9ADD87635BFE644BC80
-:100230003D19C5EE40BFCFB28DB9FD61FA63403CB8
-:10024000F7F726251809EE6863FD6CE4D7E82F98C8
-:100250001DFDAAAEFF3429383E08C874BCEE3A6CC6
-:100260006008E70B46BF3D0EFAC1E18AFA2C0B8D00
-:10027000D725E8AD8DFBA4491DEE407D93C0FB2F33
-:100280001472FB1CFCDCE47F3613F16359E30F931B
-:100290002F673CF75BBD4945F1F1D0D63747339C1A
-:1002A0007F6C4BB401E9F0F2F6BC28E4879D881B13
-:1002B000587FBCD97E0F8E177F05E0CDA4EB6EC2B0
-:1002C000ABA28E8A03BC4E9866533700DE5F88AAC5
-:1002D0009F86FC1FDC6160CFC2143B4DAE59D8DF56
-:1002E0007959B5A3BE7D21B33E9AD6B3C340EBD9AD
-:1002F000191D1CB116E0DE304C2947F8142B535061
-:100300000F2B8622F51EB83E349EDB574D2F2F88CB
-:10031000E7F2F3A404F3E7E17385243FA5B28DE48B
-:10032000AE2BC8FC669827696EBB8CF4889E05AC22
-:10033000847CAF046406FD491E46498D4936A35F9F
-:10034000257DEBB62D06BA4F11FA76CA87AB2B780E
-:10035000DCE33A3D11C63B6833325CD764D621A357
-:100360003F38F92A7305907FAEF278C60E7FE83FDA
-:100370003DAFF3074BC578EEA0BD042F17B2483F41
-:10038000AE7473D9E712CDA32A68A78B2DBAFBE808
-:10039000E7C5621B193795C50BFFA63FEBFF1DE9AB
-:1003A00037E05E98EF3E3B9FAF54CEF915AEAFAB52
-:1003B000DCE4423CECB2B9DF9D887AB1DDC8B6B26C
-:1003C000BEE5E979883FFDE0730CBB6A65FE7CE21F
-:1003D000471BAE67C4E68DBE2858F788417C7CE495
-:1003E0003BD42343FF333101F5F855A15FB456E305
-:1003F00033E4277B1CE727FB0D2139BC333E939E5A
-:10040000D3E40AF90CC7D96FF42FF4F46227813FC3
-:10041000EF44FEDC656314473D966A598072A5CDB2
-:10042000F3BCE0637DBBBE666DAB11D7FD15D80391
-:1004300080BB24EDAA29DC9EEF49E27C552A7F4B44
-:10044000FE766793C4D0CF4F6EE2FA3B9C3F527B5F
-:10045000E78F5F225EAFC51F5ABCB0FB87F2C79122
-:10046000BF8F3F365C933FBE8D453CDCD75C9CC262
-:10047000BEC7BF6914FCD0D7FDF156AEE7F4D75F15
-:100480001178DD67DA383D17F5C0CD0617CA395047
-:100490003F7D36AC635F347F8F296BB2B0BF4BE1D9
-:1004A0007A65579399F4CA2E9BD74B76DC6961E83D
-:1004B0003F30C5DBF133D4876916754318FF2E8DA5
-:1004C000E7FC566F0C8CFF0CFDE2A39CCEE36ECED6
-:1004D000934DF05CEA522EE705174C5B300E2B4D26
-:1004E00028DC817C74027516B4D5E7E029407CD500
-:1004F0003913E9BBD75A4E96617E11FC1E37F2D9EB
-:10050000D8FD27CB8A72F079AE4FF78A56EB8FC7AA
-:1005100035C5B3EE78D723ECC678C6F59207F92433
-:1005200037D4676E23C56B1A3FD447033F805CCC3A
-:1005300067AA3116869C73CEF330984336A73C9257
-:10054000CEF303D3283E9C7BBAFD55D0CC6C9E479E
-:10055000775FF0C17C1D1F809D3D1E8FFED2F18014
-:10056000C980F399D664737F684D16F293264FF4D1
-:10057000033CD5FF61D8B31BC2EC7B6C0297A3C7C9
-:100580005D0ADDF77598FC83E1D2BF33FE5EBDB036
-:100590003F9FA33C63FC70DF2B0BD18EE62F771FB0
-:1005A00044FC4F4F92E9FA2F58C09285F47129E428
-:1005B00097D51BD5E2CFA4D0734CF10CB3C1FDFD90
-:1005C00049D1F9387F6982F722D28929C123F8DE1F
-:1005D000D80979F9285FB6517509688F34B801AE2A
-:1005E000F2ADB6101C1A5C67055F94262CBE88EB32
-:1005F000C7F750BF347E7CDE82EF6B74AF6FFE8234
-:10060000D33B8CFE48EF10FDA53BB0AFE1E12BA141
-:1006100057B4FE3F4A7F2D7F704DFA637E20F6EF80
-:10062000A2BF352129447FF0B3E2B1AFF7B3EA4D61
-:10063000E077E7F4BC5EE828A4E75D265821FA5588
-:100640002D1077A23C7A1DB42FB0C7CEE7EAFAC3CB
-:10065000F9FEE022B2C109F184F76A537008FA2169
-:10066000A30212F985A340F01791FF95417ACF2597
-:10067000F0C4CE4BD2F961DC45FF2E1DFDC3400214
-:10068000FA51A3CC1501E4F7DDD629E9E8D7E559FD
-:100690002765215FBD3AECBEE368825E4D5BBEE735
-:1006A0003935E4FF68FAEDA018569BBF2081EBA115
-:1006B0001B41DDA21F882E63381C9A3E47F2201C86
-:1006C0005260BEE13B2BE9E5A60EA0C78D0807E00E
-:1006D000A155620DA8CF0B0DEEC462F4D392020AAD
-:1006E000F7F7BEE98FF9C18AA637DE43782B703F52
-:1006F00004E35097F162773E62604F3F58F357B47E
-:10070000B840F367B4F813FD1EBC3F405CB79B01D3
-:1007100040B447018BBF06E67FF2B23ADC2DE456C7
-:100720008175548875CC64ED0417FBF6BBEF260188
-:100730007D66087C541C81B83117EF337633E0E1D5
-:100740006685C79337BB207E0CE3A399E322FBF8B1
-:100750009B921C1AE75ACFEBEDC044DDFECC3FDA8A
-:100760001E017BF409B8CEC7D6F1B874C240D9A730
-:10077000A0E11C9769407EAC16F60DC2E85EEDD292
-:100780004BC22F9E60E8C875017E5BF7FF8DECE0E1
-:1007900081FD7F7B07FDBCF19F2BCC0CEF4FF8BC9C
-:1007A000200EF5041BA7125F69E356FFA9C1CAF822
-:1007B00075E2FF2AB1F6C3008F7B28C267A1F677E6
-:1007C000179FDC84E37D794EE1BC2DE62F3379075A
-:1007D000611EBBCCC4F3018725EEFF68F70F1B0138
-:1007E0006EB8BE2941CB0BB493DDC79F398CCE3791
-:1007F000633E202F44D79B2F947FAEE4F6A40FFED8
-:10080000FE37F2015A1E60ABC01F3B78D6A4025CD3
-:10081000531BEE51D0BF9EEA94993B6CDE9B542B48
-:100820007387E5039E49D0F923075FDC3403EC4965
-:10083000759BEC8A42796DDA753C17FBEDB2CBDA29
-:100840000B1FE9F13BB5E91E05F9DF98A8927C5F23
-:100850006BFE0923804F6E40BA33F2EB3AC748244F
-:10086000477AFA1ED8FFEB848E9CBEF1DD17FDF5AA
-:1008700074F8DDC522DAEFB9163DF47CDB02EBF447
-:10088000C1FA02B04E1FF85D07D6D9A97F689D93C3
-:10089000FA1ABF5637FF3601FD368D4F4B1338DF3E
-:1008A0008CDFB72981D942F4D2F0F5A1B0577BA3F0
-:1008B000347FC3356F065C3A05768718D4C7DA9D56
-:1008C0006342F66BFEE932F23734FB355F5E544A21
-:1008D0006A53D82F4C23A35ED3DBA9B9EA6223EB7A
-:1008E000CD3E2D88EC97B76D5462A867203A4992A7
-:1008F000C087F0B33538CE300FC1A9A7A706971E21
-:100900001E6D7D9A7F3D5FD06FCEA04C23C2DFC3AA
-:10091000AE8A75E2409887B85EBBFAB58E9FAF5C31
-:1009200028792BB717BEED8B7FF5F7357D508613F1
-:10093000E451EB43BFC298984C742BBB6A626EB013
-:100940001B2C238A7D1A665758C550E29F7B851D54
-:10095000EE8B7FAAAECACC9B1FE22363E31356E45F
-:10096000A37DCA462BE62727DB66D5C6019E4AFE35
-:10097000543417FDBCEA0E03C3145669D31707316C
-:10098000AEAF7E8FB9502F1635B51623DF1D52DA64
-:10099000658AB3BF64EC89307FB1B1A9D68AFE54B1
-:1009A00063A24C71FC6107E74BEDFE9644AE3F1A23
-:1009B000CF5D9EE1EEE5FE1971BFE4E33CE2A3B238
-:1009C0004741AE310E4D8AA1BC4489649F53817E5C
-:1009D000C84D46F2F3218EF923EE035E6A34EFC26E
-:1009E000D47E69E323F7D88110F5FFFD698D19F3F3
-:1009F0000BB324D7B3F05C991A6CC57ED9DC4CAA32
-:100A00007B18FB3F32F9B3C15B25CA8B9401BB60F5
-:100A1000BF6C51A61FF313FB25DEF735F37D02668D
-:100A2000F725CC8079DEAE4818B581784AEB0FCE39
-:100A3000DBC0042387C557F7ED9549CFDC572AF96A
-:100A400071BFA9D49ECE7C617C55F6A889D635BBF2
-:100A500029A508F9784EB9CCFC61FC1D107EE13C5B
-:100A60000FC4E161EF1D8EE270051703DC52486E82
-:100A7000A7093E9FC5B89F387F4142C47BF0C62D71
-:100A8000688F6E6D8238157AD344FC7AAB373D623D
-:100A90005E0FE37ECD09162C8983F1FB250D24FE24
-:100AA0009B11B48F0EA8A877CE24A25E63C3B89C16
-:100AB0006872572AAFAE237E70F27DB279124893E6
-:100AC0008CFA2F529E668E8BECCF72F7A8378890E7
-:100AD0007FBD5ED7E47E5EB34CFB72F30A2517EB55
-:100AE000453FE8FDECB1D17DE8856FD587E37AD34A
-:100AF0000B1F96FF5D7AE135082BC681FCFE345151
-:100B0000E8877EAC1FEA875279FB26E4972EB07700
-:100B1000E65EF845B3175A3C5E06F24AF27E91EF64
-:100B200067945E4D65BEFC503CDEAD2FC09F70F5F6
-:100B3000E2E73C9D984572D4AD5F34FD11E64F1855
-:100B4000C7FCE3FE4429F891A63C842F83E02B6385
-:100B50003C1F588685439897737E41F9966A88F3BF
-:100B600029DE67BF25B850CF49F12139D0FB195A8A
-:100B70005ED72AF2087ABEE8CEF3CD35521D8CC678
-:100B80001765762E1F657365CABBEBF9449B4FCF83
-:100B90001F015D5EE69AFC21E4EC87F24773A2D860
-:100BA000571DC4065D0F5F68FCA0F187DE8E1CD365
-:100BB000E567FAB2236FA21D19DDB71D797D989103
-:100BC000F4B5DE7E68F6E277495C2F6724F27D8E0D
-:100BD00069C3E7D9D0EFB026F13A0DCD0E75E7978E
-:100BE00036737E78BD638922A13D41BD9019867F11
-:100BF000916FD5F8AFEA5189F28D15422F7536F312
-:100C0000FC5B7589ECB7C0FF16373DB189F78D9451
-:100C10009F2B545A150B8C3BD325B930AFE316F9F3
-:100C2000BA196E89E7EB5C91FBF42D3AFACE117C90
-:100C3000349305EBD01FD7EBA53957B95FA0D74F39
-:100C400073C4BEFB1CDDBEFB554DDE07B001FF4C7F
-:100C50007FC09CF4FDFE80F6BE46478D7E2AEEC521
-:100C6000A11C1DFCC6A4C670FF19E937F5AA42E312
-:100C7000D893045F0A7FE6CB8B79BFA0984F3C5F87
-:100C8000DDF485C93BB26FF8AFE5B7C6A29F3E3A27
-:100C9000E4B76BF34E53184B47C74C674F6689EB6D
-:100CA0003FD47E0CD7AD43A383A6477BE059E8D958
-:100CB000BEE8742D3DABE9B37FB69ED5C6D7EC80B8
-:100CC00036AF5EFFF615B769FA74FD1603E54B26DD
-:100CD0008BF878B2C8C3CE4FE2F1C1AD493CEEEC1F
-:100CE000FACA62407BB9B385FB272EB3FD38FA05FB
-:100CF000A17C1FA7E7C331CC87FBEC4C69B7D0BE02
-:100D000067119012F73DD3F8BEE77625E0213DED5F
-:100D100052580DC8C9397C0FE679F8806F21EAE98D
-:100D2000873F1962A0FD7725D08EFEC9D83C85F695
-:100D30008F1C6695F2C19DCD663BBED7B5EFFFB463
-:100D40001A719CAF980B43B843CDE6EEFD1BD40758
-:100D5000A5729B8CF9FBAE20C8083C3F6941A018E6
-:100D6000E3A0C9ACBD16E57B02D2B117FAFD2A4952
-:100D70008BB37BCFEF1737733FAE3846263F6E8A73
-:100D8000AFBD18F7ADA62892AB169FD5E5F75FD19A
-:100D9000C51FA1FCBEAAF0FA435DFEBE91EB99EB24
-:100DA000CDEB4F40DD067CBC5EE373A16F581FF9AD
-:100DB000FD9D26BEEF133C6964E807B30B89BDE6D1
-:100DC00063AE95E7DFD712ED5663719F8EFBEBFBA9
-:100DD0005AD2DC6A6EDFCFE776048BD03CEEDC3E85
-:100DE0005BA1FA35911FEDB17FD2C7FE88BBD17EE2
-:100DF00008D5695FFB21C55FAA94F6B95EBC697529
-:100E00000B4CD43FDDC8B49F9BE474E7F96837F21C
-:100E1000F9CEF3696E84EB79C1A71ADFEF3B77391E
-:100E20009AF6414D6E15F78F830E8BEB59E25BCE30
-:100E3000EFF5A943FCB84FFB1B21173BA383C7B2B7
-:100E400013C3F73DF83E47CBBA47679F33D27EB90D
-:100E500084F9486D7FD9077243753DF18CE20F2309
-:100E6000AB67386FAD9BFD1ADB2993D438C4FBE523
-:100E7000446D1F538DA33CC4B757A8CE508FFFDDE0
-:100E8000EB9807EB511AD6593C0AC8FFABEBECD4F0
-:100E90006F5CE7A476FF3A95DA878EC73E8076BF0F
-:100EA000DA6DF22861FAE39D64EE77E5657F524CD6
-:100EB000C5DF7F6354873EE5C10E19F5C58D5761C7
-:100EC0001D117527CA65C437E537B342FD4C6971FA
-:100ED0000CF66FBC0AFDB0E7AF2439B83DAA53EA5F
-:100EE000462793B4105FFC2DC9DD9104D7EF7178CC
-:100EF0003EC176B734FFE02546FD73BC7FAB7C096D
-:100F00009ECB0F14525E391FF3CA7934EC42C4DF12
-:100F1000E85613ED976BF9DD3C4DFEBE8ECC33E702
-:100F20008BBCEEABAC83F2CD051608B40C0817A74A
-:100F30009F5B9AE794301F98647261BDC3E82C4FA1
-:100F40003EE6635B9318C547ADADC9196A0E720FD3
-:100F5000CFFBBAB5BC2FFBFEBCEF918F627DA4B76F
-:100F6000AE9A687FFAC8A9585780F60B2DE4FF693E
-:100F7000F5C82DD1BCCE80652CA03CD38DA29ED1CE
-:100F800062F69A93495F050E9E80F77E7F99F17D08
-:100F9000C7F60F695FBBD8303C05EB7E0F4A43E3D1
-:100FA000B07DEAA3D81C6A4FC55E44FCB418AC2AD5
-:100FB000CE7B669D5A82756D27D6B112AC637B6B72
-:100FC0009D85DA93EBECD49E5AE7A4F675B88EFCB7
-:100FD000731C9E477E71BF65A37D92296FD9146CE7
-:100FE000F316C650BBFBB61813C2DB12CBB66BF3BD
-:100FF00060BD5A203AD080C9FED6A7BC8F59FA816D
-:10100000DD337B474AA3186B7BCA3B5D990CE34EEB
-:10101000EDFF93AFE0FE9BC9CB1EB3005C734FD9CD
-:101020001ADAA0FF76F2F2C76CA86F8F4783D2C39B
-:10103000F5AE38EE1E047443A590C605978D837EE9
-:1010400082D65F31BD641263B71477643360ADEC50
-:10105000E495D32D80C75BACDE1F63DFE44B9A5E63
-:10106000D20FFBCC87F56041C948713FCB9012B1DC
-:10107000FE65A6C3FB467258FD9E5BFA13ED338DE9
-:10108000714BCC41871F8CB4EFC5EC1F2784CBDBA1
-:101090004C47E91B488F89C9BC0E78F424C91D5EF2
-:1010A0005FA17F6EF439B504E934E642591DB633C9
-:1010B000CB1DD4F72C185B87F25C62EBEBFD627AF8
-:1010C000BF3C99D78D142952445D89FEB97C6026B6
-:1010D000F48F8347A3294F30FAB4B716EB4F4B9DDB
-:1010E0009979B2A6FAA8EFD882FB6DA32BCE9424EF
-:1010F000A0FCD824179A8931ACA32E01EE17DAB1DF
-:10110000A00AD7F54431D6FF8C562517A2ADD0DD05
-:10111000DA80EF17BA625C85E88F9F564BD0F49C5B
-:1011200052469D2880E7A60E925D1618E854E0A668
-:101130008997A05F382C8EF2BC85CA9A2B27A81FEE
-:10114000E3AA51711D5B7E5D45E398C9AEEF9E51E8
-:10115000FC2FC83F459E38CA09023E4AC2EBCA600E
-:10116000DD0477A15DF64749C8DFFF5A6287FEEECE
-:10117000FE1296CBC37CC3FF42F78F44AB5100E80D
-:101180006E93BD04C7DB6D92EC0F51DF538CCFFB28
-:10119000861855CC1F952546458C3FB5441A7F0EC1
-:1011A000E1CF891B85D7CA331C11F7DB6EB3929D43
-:1011B000A8782B87FCA2B6DBD2C95E54BC35A9083F
-:1011C000DB3603F7D32BDEAA28A7FB061E07572C16
-:1011D000FC915BF429EEAD585849FD5629E52738B6
-:1011E000DF959CB83CCCAF4D1B945AA244F88103C8
-:1011F00049FEF3447EAFD0307CD32480FFDEA37C55
-:101200009FA2222733E2F91905524978FDA86752B7
-:1012100054447F7689A324BC0E756E456A44FF96BC
-:10122000B99911FD92A30564BF410F5494801E38F3
-:101230000AED5260C1025107A5E59F0A054B15B69C
-:101240008BBCACC2E3EB61F0877AB0C41669A777B8
-:1012500047733B5FCED6D00649F911BEBF5D966895
-:10126000FC24DC4E94CB15365E97158987BCA346CB
-:10127000B2977931921FE3FA92A34BEBD0F49667C1
-:1012800044BEAFF961E5023E6D5EE673B7A33FA2CF
-:10129000C1ADCDAFC15F2E2F2AA17CF735D6A18776
-:1012A00097C17A503FE8E1684A16FE1AF81FE4AF8A
-:1012B000897324F04BECCD7E6BFE7A05E82B47B8A2
-:1012C000BEB2498958B7D797BED2C6EDCB2FD3C689
-:1012D0009DE9F0D0FBEE1D9F9E9A2087F5333F4E8F
-:1012E000880FEFBFF8E9A688FB491FCF7184F7B7D5
-:1012F0007E3A07EF4F51D45A1BF0E53126B97CC82E
-:10130000076DAA1203F4283EEDAEC3B6F4432F9640
-:10131000ABB2A9E77C75D84EBCE86F33C3BA6E1A7E
-:1013200026AB18BF6B7E881EDEBF26F3BCC3B1ABF5
-:10133000AA15F75977FB542BFAF3BB1F54ADE88776
-:10134000EC76F37319EE2C039D8F7167F37AC5BFAA
-:1013500024F3BA834EF1BED6FA8DDE4E841BEBCC5D
-:10136000D137A8FA264875E5C7D0BFCAE9E95F1D9D
-:1013700053FC369CEFD8837E5BF87EE2F5FA577F0C
-:10138000041E43380A99E409D723C596284FB8DCD0
-:1013900096DA1D11FD93C20F99EA4C8D78EF263530
-:1013A00033E239F01B87A15F526B62546FEB33F06D
-:1013B0007A5B3D1E57A4F0F8CE65B3A33B83FB6672
-:1013C000726FE7915CC5865ECFB7A5A4707FF03FD2
-:1013D0005218C1352B85C3A7AFAFD5F76BF17C0F82
-:1013E000E293B99CC8E72EABE10AB8BCACE0E927B0
-:1013F000A6535D6DBEE1DE2CE8573CBD753AAFAB40
-:1014000035ECC13ADB194F3FCFEFDF60C837823F81
-:10141000B0CDF7C274AC2BAF8AE2F5095551A23EAC
-:10142000B46E7444DCA3183E7E6A21C69FFB8D0C0B
-:10143000F3FC8F99C00EE685F6D9AD661EAF5A4D06
-:10144000BC0E7C7DE6A9F5A83F3E8BF2E6A5509E3A
-:10145000B148453C5EB45BA83EF4BE7DA529C807F3
-:10146000B35278DE2B7BCF44279D2FFBE7C151FC85
-:101470007D7060FD308E73717736F9E5D903189D64
-:1014800027D1E801E1335D8F82F081CE6330B7135D
-:10149000F36FB50E138D332B85F3E3F5B63DEA8973
-:1014A000E30C6B7641BB2085C7CDB7E2BC046FB0BF
-:1014B000FF2CDCD0B307FBCF1EC9FB486F59CE0B06
-:1014C000A27F1BFC510CEDC3BC1FCDF1C63282B410
-:1014D0006FF3EEA26CD706BACEF1B8C03FB0B643F8
-:1014E000C5FA0F7F3FACB718E8F42E457CDC66F6F2
-:1014F0000F26BEB2AD89C179AEB7DEB8EFF921E0F3
-:10150000047B327F3CA797363FE0D882747C579C9F
-:101510003BD1E001387E8C70687075C3A3AB3FEFA0
-:10152000147E7B278E971BCA5357FFC940798A6A5E
-:1015300009F424F4F77CC85C3E95E8437950DCD28A
-:10154000C2F9C69F58526C83B6A071158F8FDB9578
-:1015500088BC9866CF268AE7C7BEA744D8A389224D
-:10156000FE1DAFCB4F4E6C9C4EE7F826EAE2E25FE1
-:10157000A488BC651A4B0BCF23AC15F1C6E5B68128
-:1015800071E89F2A10E7CA806F932AB371F121BDD9
-:10159000D0B08E459C53D4F870E469FB9D38DFC809
-:1015A000D3EC0EF207B471BBF3131C2F97DFE37873
-:1015B00019D531ECE949D0371E3132BF1A5AE70448
-:1015C0000E2A833087E2A4CB176C645FC61C9D4350
-:1015D000F5DE66A781A961EB8F52A3991AA62FADFC
-:1015E000C3E223FAB2A04F5D54A41F902FE6897185
-:1015F000A5458CB73FBEEC08FA05F9B6E5E417C47B
-:101600008D1B18311E6B5322FC833CE67163DCE8B2
-:1016100002FAE27ED998D34A841F302EB091CEA12F
-:101620008EFB30F2FA847391FD037DD1A52FFCB1BE
-:10163000DCA7D12FFCA1F873B823F197501E89BF06
-:10164000244F24FE521644E227D51B898FF4E5234C
-:1016500022EEF75B9317D11FF0C08488E733C18077
-:1016600085F7B31E9D16F1FCE08DB323FA4337DFF7
-:1016700016F1FC70FF9288FBD9DB56FE207A8FAC06
-:101680005F1BF1BC9EDE3734FE34627C8DDE3EF89B
-:10169000FBDFA437730AFF50D03B51D859879BD743
-:1016A000AD75196D8FE2797C3C3682FACE81E7E91F
-:1016B00063D1FEAB5497E79BC6685FFB97B2474286
-:1016C000BD940EA8356451BD3CD5F5FDDC6088D8CD
-:1016D00067B73BB93F6477723DFE6B133F2F950EA2
-:1016E000FE26D929030BC5D916AC77648299AC8F35
-:1016F000639C5DE7E818A63A306F07FDC921BDAAD3
-:10170000E9D1DBCC6A6D07E8975132D793A03FFB54
-:1017100039619EF7A5078DDCFFF019D1FF48B7307E
-:101720005F6C1ED919CA433B58A284E700E2427A93
-:101730005CFD0E88757065369DC37A134140BF59B4
-:1017400075D17ED3AD9A9E5A3E9CF4D4655BA4FFBE
-:10175000767969165D3F7BBB99EA07CE8A3A470DD9
-:101760000FFAF3D6DA396CEDFEF22D9B62D0EF3C26
-:101770002BCEFF6AD7270BFC4D76CAC2FE59D66026
-:101780003E6C1118F138C07BE5918ED8DB18F99BBF
-:101790009370DD555BAEDCFE2AF4AB0DC1646E3791
-:1017A0007CF4DEFC77F9B9EEF97F8BFCAE408593D3
-:1017B000C7F91562FC5BA0B1039E6E013A38B07D9B
-:1017C000635219F2275CA7F371338F3023CAF32CCD
-:1017D0006F26D54D9C62AE337B01C4F94E95E09CDB
-:1017E000CB3C46CC5BBD737B650C3ED73D9E360E35
-:1017F000300CFA25EF3A7CC664CC1B4CE6751330EE
-:101800009F05AF7B16A53F8C76499BEF1DE6BD7407
-:1018100006E83B9BB9685C6D7C86E9F9303DB57B99
-:10182000F9AA8F1260BEB5470D948F58DB6CA6786D
-:10183000AD6BE57FED780AEEDF91DED10FEDF6FBC3
-:101840002BFF3604F9E1D6CD325381DEAADD7BA72A
-:10185000336C5FE5ECD22B31781FECEED6A7D05875
-:10186000BE6CA63AE2F757BE3C24DC8FAD74162E50
-:10187000C7F7D8B8EB3BEF58FCD2F014AAF712FC2C
-:10188000B442F0D3DA178792BFB536A69B9F787F14
-:101890002BAF1BD1D67146F0E3CA97BE89F8CEC4F0
-:1018A0006EE023D5CCF7C5D4A160EFDB2EE7D2776D
-:1018B0001F8CDE7F75C2BC2D573F89C5FE9E37FF4A
-:1018C0004AF0B3B9D7072FCAA26F4C687F5A3BEFD3
-:1018D000B9A029211FE90E72B601C7BFED772F5EAF
-:1018E000FA00F1D3FCF2D69FE133D779FE739796D5
-:1018F0007714F6C625F001F686E28B2E16CDCF932F
-:1019000008FF46C11DF92CFA9E874A7CED66C77117
-:101910001FA7B6D5407526B1B8091496AF8B950DA3
-:101920009A51725B9CA0AF859EF97FCEDB2AEAA814
-:101930003E20D21F2A38B432C20FF2C05FAF7ED031
-:1019400033DE5ACC2FE9FDA1F101C36253DCF7F875
-:101950004587A6F5EA174140ED96C688AD21F835D2
-:10196000E8F4F37E2157F53816E6FF03D1FCFC338B
-:10197000980EF47B7F9ACAF5B72D83F1F36952E78D
-:10198000300BE8CB16E7A2C71F856B96417CDDD8EC
-:10199000AFA53335F9C47FDD7ED7A111A4B7D8B781
-:1019A000301BE243E43DF4742BC0F3ECF961722781
-:1019B000DE0F1CFE6B2CE67D77C4AB6F213D8247AA
-:1019C00065DAFF89523A4C8E5EE2BB57510F029F97
-:1019D000CAA9DC1E581A797ED1A2BA19C60F51764F
-:1019E000FBA8F0737F8D4E1E4F561E7EBFBF09E8C9
-:1019F00071C9D0169B03E3AFDEBB3B16DDFF0C9332
-:101A0000F703E4C35567DF1E63A7FCCD96FE180FEE
-:101A1000D607F87730462ACCA7E4F584A37A332C8E
-:101A20002601CFE927503BB2297F19F2597580AFC3
-:101A300013C7C642BEE18D12F53B1B6BE371BCEAD6
-:101A4000DF37A7A13CBD9CC4E3CD97AE66F3F71585
-:101A5000A6E0F341A74310D36FC0F8E46511D77433
-:101A60005E95E9396DFE918D85B21DF82127B0F1A3
-:101A700000C5514D6615E91AF51CE378688A22B94C
-:101A8000AF6E99CAD0EE7739984B82FB3BA2837F29
-:101A9000A4F36ECD6615F3AD51F68D2C1EC6DF2175
-:101AA000F659870347E17929EDBA365F54D3D31845
-:101AB00073203F50DE374AD9C826DBC2F11C437879
-:101AC00076A4723EDA111D30609E253898B1670900
-:101AD000AE109C8CE6D5E01CEEC7F3843B4CC1F302
-:101AE000786E06E0B223FD87330E276B1AAA629E3A
-:101AF00020CAEEA67544D955974FEA0957752EF3BB
-:101B0000A35DFFF943AC5B6E518EABA3437D0BC865
-:101B1000C08E814CC8F9CF1F2FC908EF83621917F7
-:101B20007A7FC8AF363E5E3789E2099F8CF12FB4C9
-:101B300031F1B84E95D6A7608A298FE301F7DBAD66
-:101B4000167EBFFB79E06F1BF66DFC39579CDD3AC2
-:101B50004D2239E1F5B8421FDC2705CEDF08A4FD90
-:101B60002A702057055856BFB19FF87495A1E9A96E
-:101B70009170FFEE28AF2B15E67BED43039D6BFDC7
-:101B8000F38B51FE0AC0C7B07D5B92DDBDC8877E76
-:101B9000FC47DE7BE8C974A4FF3E49C53C6C973125
-:101BA00048DF37A96AFACC44F50D8D1F53DDD39B6E
-:101BB000A9DE4938CFB8C61ADA8F1ECF36D27E7466
-:101BC000B6380F5EEFE4FAE3F2E921CFD684E17F85
-:101BD000492A972F16F40E40B96912F2D9827E0A6B
-:101BE000B47B85BFB4B7F5D62C352C7F58C30EA473
-:101BF00023BE1F6287A8D5AE77F9F9B9CAEC772C56
-:101C000077B8C3F86F9190F745A9224F96EA9D8D5A
-:101C1000F0AE6AFDC414ABE23999FAFE6857EAC126
-:101C20009FB2F782976EB9D5C951B51234E1F3D599
-:101C300017F8F957A0731D9E3778F99DC6118BE1EF
-:101C4000FA5EC035D695FACE9AA9BE72AFD1938E00
-:101C5000CFD79CF93A17F556090201F07CDDBC6A32
-:101C600000E20DF8BE281AE56B17233DA6C9670EE2
-:101C7000CA27BC9F837C5F80FDE1A4877798DAF94F
-:101C8000F9D3BDFCFC29F03DC901F0BD1DFD861C4A
-:101C90003BC801BD3F94E47B47BB81CEC9FA408F6E
-:101CA0000FA67ED11CECEF682FB1937C635E3F0FD3
-:101CB000E5347080C6A987D8044927314FB83FD989
-:101CC000E88C25BA69FAF1B093093BA1C6E1790322
-:101CD000AB2C47C845983DE47D612F4FFC2AF0F8B6
-:101CE0002FD176B8855D10FE14F3E6939EBF57D8CA
-:101CF000AAB5AF4F98B91DD6B9F684DC5D3F8EFE0C
-:101D00006B40F0C901E1CFA29D5013783D0E5E1FDC
-:101D1000BD99D7D58E71AF29C6B3CFE3CA371EC4DC
-:101D20007682A7BE18CF3E4F5AD07E909F81E6E7BD
-:101D3000D91B0EDC948DFBDE5D67CD0CF75D1AFEC2
-:101D40001AFCE34B8087FB5B00FFBDD825580EF1E2
-:101D50001F58EC74E6EC79BF4BD2F4C7A90AE4C76C
-:101D6000CE0639D40740AA80C1B1FFDBD4938FFBE4
-:101D7000A09F95E67E3E15FDED742FB55D27FF9A79
-:101D80008CB660EF69EE473598DCD9C83F0D032368
-:101D9000BF1FA0B54FA61A890E057D7CBFEB482A50
-:101DA000CF6F0EF1B1C7908FAA1A64BB1FE87EA94E
-:101DB00041769BC01F3AEFF626E3D99C0BCC77CB3C
-:101DC00044B4F3228ED4BEF77217FA2960A7EEFE50
-:101DD00065EFFB0FAB99F65B6340BE5AD624B1FFAB
-:101DE000001C2C7F26F2F9D5DAF76A1AB71CC6EF69
-:101DF00088AD7C4E771FFD15FA0E46A41F7324553F
-:101E0000F827592C0BFD13E023D20F46851D310313
-:101E1000DFAE48F7EE437BFCB2F8BE02E85192C752
-:101E20007D4E615744FD417007AF2B1EBECD2F1B69
-:101E3000E0FD098A5F467BC5A0C57D87716E6F197D
-:101E40007D87C9E73E8DFB3ECB853E5CAEF9697E62
-:101E5000BE3F026637C24FAB16AB1FCFFCB5B1B861
-:101E6000FE6D12C5CBABB645EEA7548BF5AFDE7C4D
-:101E7000F2309ABCCA7ADD7DB1FE6ADDFAB57DF337
-:101E8000CF5323EBBFAE773FE42F46EE37BC2DC6D2
-:101E9000D1EE9BD2B87EAC826520DD56FB65BF9F3C
-:101EA000FB7936FC5ED09D625D770AFAD33AE1B9E0
-:101EB000CA6D923F803CFE78649DE95DF58BCB90C6
-:101EC000AE7A3E5929D6BD7CBB91FC55FCFE0FCAAB
-:101ED0009D9E3F568AF5AFD4ADBFCA2BE9E0E37EA5
-:101EE000744FF8EA6F413A576E37B2DEE0D3E8B587
-:101EF00052E3EB3EE0D5E0D4E0FEA1F0F64F13F95B
-:101F0000AD116C04D1A93CE1BAE8A4F773771D1EAA
-:101F100041DF5BBB7C6420C5FB1A1FE8DF2F137E0B
-:101F2000F2D4CDDC6FBCD4586C1D89F14C9BC1251B
-:101F3000A9149FC58E04BCE437CBAC02FA5D4D59A1
-:101F40009BF0FB8379270AE660FC9F7FC240E7EFA6
-:101F5000F61C29A07DE7FCA38312B228CFEDA2EFE7
-:101F6000E3C038645FBBDAF236E1F984AEB69202C0
-:101F70001C5782E7D00FC81376A2A62DCF1A7EFE7B
-:101F80007C4C1A8FEFD73B3FFD39FAE9537719E9BB
-:101F90009CC55463F04DACDBDA7344A17DF2D527C8
-:101FA000963C1485F47D51A27DF2C3ED6B1317228C
-:101FB0009F3519EDB8EFDDD5F4E30378DFB75DA207
-:101FC000EF5E54379766EF807EDE967C57F8F9B364
-:101FD0003C874AF0B1542BC5CF53FB19C96E5E4CF8
-:101FE000B3FE16FD9F95EE2D24DF17F7EF3151DD7F
-:101FF000DE0E89A1293BEC3CF80AE2E3E2AB274D77
-:10200000E88417379C34757C8F3F70C92FB300C5A7
-:10201000CD1B4D18C7546ED1FA1D26A49347F8471F
-:1020200055CF7D4CFD95E8CFC37C2B9F91A97EF7C2
-:1020300060F36B26E4E7AAED124BC90CBBBF598ACB
-:10204000F85EC312C6F96089D03FAB987F7D1A3C19
-:10205000B76A23AF5B608F46D6016BFCBD42F0F7D9
-:10206000AAEDB3E8FB533DBE5B8871E30DF81CE7B6
-:10207000EF659B23EFAF107CBD42C7D73F4913FAF2
-:1020800067381B8E7CFD75A11A9703D7BF3EB972C6
-:10209000406FE7ECDB84BDD6ECE5E58081EC8DFE9E
-:1020A000B9CEC62B046775DB6513FAA7654D5F10C3
-:1020B000FE2B9A5AA97EE466E65D8DF8BAB9C96A24
-:1020C00047B9AEE8E07A685A93D9EF97F07E3DD5EC
-:1020D0003977B5F0BA49DF7E89FC1C4D8F69DF770F
-:1020E0005C26F0B80C14787A1EFABB3C6EAE127106
-:1020F000F28A615B0EE33E7B95B8BFFAE8C158F403
-:102100000FA7B12F6E47FAC07C0CE763CF44E27D86
-:10211000BAD08BD3B773BDA8B76B5DA9D933298F5C
-:1021200009712AC2B57A7B24BEAB74F1F963693CAC
-:102130003FF6820EDF154166CD413854D9E5A7A799
-:10214000DB159CF7482ED85BB4936AD6F77E87F1EF
-:102150004DE1676BFD99E21C78BD7DA32D3C6E8E31
-:102160004AE7FEC2CAF1B20FE9D51D6F0C3A98AB2F
-:102170001A42F106C419CD69493CEEC08292373249
-:10218000649698188A371E716EAAC8837EF5762EDB
-:10219000F79DE3603C3C7FAD30F247ABB79BE99CD9
-:1021A0006235D09FE28A267E9EC2D3249522DDC16D
-:1021B0005F3F9A86FBB198528575CF6AE47C3FAB4E
-:1021C000E40BE297A383F87A2F2B6A4A6FFEBBE6F3
-:1021D000B7E3F93035CC7FAF0239C5E7AB9A783D2C
-:1021E00052C3816FFA67A29E6BFEAFFE8BA1FD5AB0
-:1021F000D845CD2F0C825F3890FB45F4BDC9BB8517
-:102200007C2DB3F37DBABB85FD61521DF17995B18B
-:10221000FE503CFA593B78BD00DB871F8503FDF873
-:10222000F64B75F1B0EECE9724AA87C3F7F17B94F5
-:102230009D4BEA3F41BFFBEB1D16F237EF06BF6532
-:102240004A5E4FB9D4E45BFB6E560D7B88FCCF87AA
-:10225000581DB595829F3B1B6BE9FBA09ABF42EFCF
-:102260000FECE98F540ABEAFD4F15F547A24DFD566
-:10227000BC1D4D7E63D751D98EFB3180AFDFA48565
-:10228000E345F8210D07A288AE5D276D6447FE2C5B
-:10229000F8EDA2C83FD78C93090F86F1BCCD6E79BB
-:1022A0006D20D211F18EF5F72FB7BC36829FFBF669
-:1022B00013FE576D9323BE0F5B591FF9FDD79AB7D5
-:1022C0006FA3EF0855EFEF866B88293104575F72D3
-:1022D00020493C8E3448917164F53ED9135E7706EF
-:1022E000EBB903F551BA9007A6049331FF35009D71
-:1022F0000680AFA689D3D5D0CC5B98FF169E273138
-:10230000D2FC3DEE17F956E3FDAF33AD7CFFFAAAE0
-:10231000AF02FBF70F94A9AEF3FEB7570E0DD7A38C
-:102320000CE104BA561B83C9146F9E34107CD52768
-:102330002F270FB2A15EDA5282DF0F9D2EF4DFE16C
-:1023400081D6E5C8CF3E9C372534CECB69BC7E8F85
-:10235000E17A9DE86DFC928F2BD6FB109B2DE26AF3
-:10236000CE4F39697CBD108F8C4BEF251EB95EBFF7
-:1023700013ECC3A98512D633293E8C87F7BCC7F569
-:10238000424DF3B28F90DFABDF37539DD7FD2DCB9E
-:102390008652BDAFD77B03FA1B5FB7ACB881F2831F
-:1023A000D24304970FE173A25F732619EB522B9B64
-:1023B000CF2493DDDD3B7A932F06FD97BCE9781D92
-:1023C000FC09E23FF06B88FFF6B415687E8C15C7F8
-:1023D000AD3CAA78103F95470B8E57A07F71A2A8FD
-:1023E00000D5B974A280FC987CF4636C21BFA65B15
-:1023F0004FA6733FA6AB358AF20B121BC8F9870DA7
-:102400008AE09FD50DAF93BD5FDD2847D42F6AEFDB
-:10241000DD99AED038CB34FEA997DCC41FBB78BBA6
-:10242000BA710FAD6F95B19EE85DB3DDC8EFEFE017
-:10243000ADF67D581F8BF7213E8EE325A0C3349364
-:102440003F03F3D3C732B99FAFA7C7E7E93CFF719A
-:10245000ECAC7700F2CBB142EF507B2F76C2C78A4B
-:10246000785C2B097C37F07353FAE73E4B97C477BF
-:102470004222CFB76AEDA974AE3FA7997AFF2EE04A
-:102480006FD2B57309EC31430146C546FB06E1D76F
-:10249000A7867DD761CECD46F2174E31FBEB58EFC4
-:1024A0003843D3B3E3B87DD5E7CBE789F73C9B55F9
-:1024B000BE5FA43B3F334F3BDFA43BEF364FF83BBF
-:1024C000F374FECED3E9C28F1FC286A01EAC17E7FD
-:1024D000EFD60E8FF287E7B3F4ED61B12F82E78775
-:1024E000B0AD19FE2EE57D8EB59E7D85EADDCE462A
-:1024F000B1813CAF47F9EFCA3EF2DF35DD723937C3
-:1025000082CF34BA5C12DF83D1D365B7A6AFC4BE25
-:102510005DB4D8B7F31BBDBB519E2B2D174DBCEE40
-:102520003068427D56339CFB4D974A25DA6F073859
-:10253000FB9BC3F4FBA5541E7FDD7F8B4479D756EC
-:102540007C1EE3AC7A89EABC2B03ED26E4A7210DBF
-:102550008B1F26B9F5B1D32CECBB1A332DDC4E768C
-:10256000D34F5B77B71D8BF7717D9C482D3E8F76DF
-:102570007186B083FA735143597B593AC033DF2DCA
-:10258000B9B01EA02F3ACF5E30EA7544C3F5D2BB76
-:1025900033DDFB4E3ACA79FBE55B308F7A6CF86726
-:1025A000FDD18E56F5C1C71F0B3CEBBF2BE31AAA1A
-:1025B000D6E2F7556A9DDE0ED29F866F6347301CC8
-:1025C000A7E3376B25A41323FEEF4B7E3E13E37E78
-:1025D00096CEBF770FB8A77D9755E9BC4EEB98D143
-:1025E0009F41798A9CEBDBF7AAD9F7462EEAB3CE56
-:1025F000D6A3B9A630BA5E5C0B7A00ED4AF3C1648B
-:10260000D516CE7706E23749D2F84F11F632920F3F
-:102610002F221FE6607B267610EAE35DA76207E3C0
-:10262000787B79DBCDAF4DFC7BF6101F0D9917132E
-:102630000EDFC304DFA57A3E0E631D43E68C0CBF9C
-:102640005FDB171F5B33888F3B22F8585B6F3D7E43
-:10265000CF07E38016337DCF07F3D78E3039199A31
-:10266000C1F5CF58F1FD9EF1CC47DF391C2BBEE3FD
-:10267000335E6101251EF7CD0232DFF7E5E72DC697
-:10268000087E1EAB045AB18E62BCD8E799C0DAE965
-:10269000B9292C48AD9BD9E91C451173513BCE1289
-:1026A000988EEE544E7D3DD525069215C7798B3810
-:1026B000AFD10BDD42EB57E8BB3DC49F329ED7E95B
-:1026C000FDBB2FB333B8DCD3C74590BE9718E5B92F
-:1026D000F07B6D38C9448595637DD3648559A2012B
-:1026E000DE5D870C24CF2D1DAA1FEB535D09E2BDD3
-:1026F000CF19D5E18E757379459383F518DA7AF59C
-:10270000789800E3619E6DAC029128E13140F3DDE1
-:10271000C8F8399242A652FD736946A6D0F7418A9D
-:10272000A38A218E427D6FB0F8081FD33354BA8F2D
-:10273000FB25B130CE848D127B0FF73FB2F87AB50E
-:10274000F1270023E0F9C2E919DC9E614AF5BD7862
-:10275000BE8F124B05CD2576FE9DA364FACED1F532
-:10276000E2B52B997FEF32F6CE60E7CF0A42FB4904
-:102770002EFCEE516CE83B9B2EEDDF830844FE7B84
-:102780001077642CF911F2A356AFC7BCFCDF7DD0E3
-:10279000D7EB85D5E7B10B61E7B0B5BA926DFED93D
-:1027A0002A9EF35B9068A173BF7996FEF968C7060D
-:1027B0003ABD34FEFBD2F6C13498E21FED8909F12F
-:1027C000BB95B9C721BE437583FC3B50DDE7AE9294
-:1027D000199D57B49A797DE563201FF81D26902E28
-:1027E00015EB68D883C5548FB9DE6171E17909337F
-:1027F000C26D0DC15D6B11DF05B5F07D717D3D686A
-:10280000ADCD40DF1DAD65D1740E3D29DABB2E0381
-:10281000E0BA2FA688CE7767EF9CE444BF317CFDF9
-:1028200093B4F51B7AD647C27A1FC9E8A51E515B3F
-:10283000A7F6EF76D805FEB475DBB5734A6E25E2D0
-:102840009C92868FC7A2F9BA8DB8F39F45EFAAA8CC
-:1028500037F4EBFDFFDC29BC16A06400000000008B
-:1028600000000000000000001F8B080000000000B6
-:10287000000BB3D36660F8518FC0C19A0C0C5DD2C7
-:10288000A862B4C41D120C0C9780F80B106702EDFF
-:10289000F5926460F006E26D40BC1D88C5A518186D
-:1028A0000280381088FB80FC7E204E07E224A81BA3
-:1028B000B30519187281381F880B815848808141EF
-:1028C000588078FB8B1519185EAB22F85A6A0C0CED
-:1028D000C91AF4F3FF60C381B6F4B5EF16D0BEE5B4
-:1028E0006E08BE0490BDC20D55CD4A37FC66AC42A1
-:1028F000935F8DC65F83477F810D2A7FAB292A7F37
-:10290000AF3903C3072435DB4CF1BB051D2B00FD9C
-:10291000A788274C9730A2F22732A1F2F9A17C00B8
-:10292000BE1E313CA80300000000000000000000B3
-:102930001F8B080000000000000BED7D0D7854D5C2
-:1029400099F0B93F7367269999DC24433260126E7F
-:102950007ED0A001879860B0586E20E147A30E0892
-:102960002CB440262888166DC49FC6DD500609BFCA
-:102970000921E14F70D11D105DEA63FBC5565B75FF
-:10298000BB7682D646AB3568D787767765A015BF0C
-:10299000BA761BD96D976EBBF57BDFF79CCBCCBDB0
-:1029A0009900FEECB7BBDFF3C5C7E770EE3D3FEF24
-:1029B00079CFFB7FDE73C725BB59701A631FE31FF6
-:1029C0009413731963B5A9B2C5C362D9398CE5767E
-:1029D000488CD530B6B25D89CF827F1676B4BC8282
-:1029E000F5E56D6EC35DCA58FF036E7F0DD44F6F62
-:1029F00057C26EE8DAA8F8A8BEACCB15761BF07CFF
-:102A0000EB472FE7E3FB8D5298419DB1BB199BCC5F
-:102A1000D81A0FFC13EACB2A921DF8FEDD2D52388E
-:102A200086AF99E99B04EF6F65FC7DF3038AC6646A
-:102A3000A8EFBBAD894D64EC961E98C5430DD9C770
-:102A4000BC3D63058C45F823D6B205DE57A6DE47AC
-:102A500058D7470AF46B8E399EEF9BF53E0BE07B0F
-:102A60002DF51CD6730CFF3185B14B993F783A1B7D
-:102A7000FE1D66E18F15281BF2191B9DC297B364DA
-:102A80000CA01FC5D85CC65CAC1CC6A9BDCCC5CA11
-:102A9000607D161EDB381E97354984C7653E46F5B6
-:102AA00077E74AF1074BA91F9B5E0D253C2FC88392
-:102AB00032C8CC4228231E96C806F8E7B65DF61E3B
-:102AC000AE7F034E359ADA2702F07E018BBA18C02A
-:102AD000F7672C46E56216A7F2CB2C41702C6543B4
-:102AE000252AD4EF52129B18CC130E45A7E3FEFE05
-:102AF000AEFED8BB12BCBFBF5AAA9D0225F3E5D1DA
-:102B0000BA2FB43E6B7E9545AEC37118935D113FED
-:102B100063E3AD751E66B18A20637A8F8FD3CB6174
-:102B2000D6CFA03EBE41D04BE3FB7208D6DDF33CCE
-:102B30000B633D049B3905EAA1AEACF806A8F73C4F
-:102B40001EAB47BC1C6B01CC43FF638D6E295A053D
-:102B5000A54B7745A00CA98C2980A7FA86F592028F
-:102B6000EDE646F938E34D4D665742FD704C52C5CF
-:102B700073ECAFEB314987FA78A83F28E17BDDC5DC
-:102B8000609C86865C57B20AF1DD334687B2E2B0BC
-:102B9000969001BFF5A64ECF195B4474355ED0DA2E
-:102BA0005C93F79B7B38CFCFE83DFBD3C7D67BC088
-:102BB000EF25457CDF8E1D2ECB417859D4DEBF48F2
-:102BC00065314F5E0ACF3BD7C10B770ABFBB0E976B
-:102BD0006D45BC1DEB53C382946DE3C3B8BD0DF0CE
-:102BE000FE4C951C560CE4B3220E7F85EED77DA9D2
-:102BF0007176AE83F697A5E06854A6F6133E4C4670
-:102C0000FC38B706DA57A5DA3F81ED018E3D080F93
-:102C1000F55B73D48BF34418CD33123DBCB04EA793
-:102C20007E83621DD7FCEF30EDD3DC861689CF2B77
-:102C3000E06BB0C36795167C238D7F4CC0658D6FAC
-:102C4000CDF7C4BA10958D4AD523F7E2BA8E687CC9
-:102C50005DF38DC77723FE8E78C231A83F79DDDF23
-:102C60008CB91786B862FAF3973FC370BEE50FDFE1
-:102C70008EEB7A2E8BD6F5D487675EBB910D9FF7CE
-:102C80002D81879F9E9B3F44756BFEB9A6344602FB
-:102C90003AAB34A5840BE8E558FD571EBED7C07A81
-:102CA000BF89F2A4D23C664A504E846168BF99FA4B
-:102CB000A78F419E554277E4C7490D520BB67BE280
-:102CC000C687BE741F3CFAA98BC37DC55F72B82F3F
-:102CD000BB7EED9308EF6537AEFDF93350BF02853B
-:102CE00020F0DDA537ED5FF377F0CF6F2CFCCBE55F
-:102CF0007B18C9855836C0916B4A0CF777D9F7DD38
-:102D000036B972EC793FC99542B33486FCB7AC4F03
-:102D100022F9DCDF08721FDFFFCC1D77237F3D2007
-:102D200099D4FE59771CE5C3311763288F971DF797
-:102D3000C6915FD8AA6524AF2396BC36F397DE0B05
-:102D4000E3BDDB60C9734EA7F41ED6F7AEF98BED79
-:102D50005743FF33A62B8C62D392174E3CBF2BF008
-:102D60001BA92F273A58A6265DE10CF4D0DCA6D883
-:102D7000E4767DC349A2AB6550B2343E9D2BF86C1E
-:102D800059C32F047FEA24979CF0BC515B589C895F
-:102D9000EE4E09789282DEDEC5FDBE0CE1835E4810
-:102DA000375D4A5C4993D3F0E78A4CA07A0C59FA14
-:102DB000962D76382DB9DD12CBB6E92B90BFFF8268
-:102DC00072B3B92DDFF67C6E0EAB9DFAE9E4F01F0D
-:102DD000480E27258207F42FED7F242EC5512E5A49
-:102DE000FB7387D89F4805A3F5FCEA80148FC1FECA
-:102DF000FEEA8858DF3E29AE4844AFE6690F8E0BE5
-:102E00007396A7F6FF76B1FFA9FDE3F8B1F095D26E
-:102E100073B99B9200428B2F5282F2DAE21F0BBFF2
-:102E2000FD7B7E5482FB57D856DA5D87701E508832
-:102E30007F3FAC3F598CFBF6AE0BF00AFD23871F9A
-:102E40000B305F0AFE1621073FE8007A81E712C2C5
-:102E5000599906A780DB857568777B83D4877CFAD0
-:102E60004B31AFD5EF475B66CC44FCDCD12331C49A
-:102E7000CFED477A97FD39AC7F753C3B8C53FCAA6C
-:102E8000B1387009C0B3A2C7BE9FA7B6DC1C40BA58
-:102E9000F9B02FBF00C7B97D6A42433857275ED5C6
-:102EA0000CA0B35966AF96CC40571FF66D0860FB77
-:102EB0000FD59E1BAFC179F629E1F530FEEA23A5B7
-:102EC000334D4EA744BFAB057E4FAA3D33C7007CB0
-:102ED0002DDF282779F05E9F323B9E417E7E5D523A
-:102EE000880E56B7B9655CE748F4F261878B2570A8
-:102EF0001E3541F81CA9DD077D2DF4BEFF81C21BE4
-:102F0000D07EBBBDDD45F2E2F63637D1D3EA0629E5
-:102F1000CEA414BFAD10F0AEDEADD0FB93A644F24C
-:102F2000C3DAAFDB05BD9D3C7CD52BA8EFCF80FC81
-:102F300041B93B63E30FB54B000F2BB67079747248
-:102F400077EED27B508E087D798718F7B6B862E3AA
-:102F50008F95EDD9B6FD8876E5DBEAA78FE4DF58DB
-:102F60008774DDA590FEBC65E3635A88E493DDDEDB
-:102F7000440E9B5490B22F4FB0A105D748297AB286
-:102F8000E8E7D636B03703C3EDCD962312D9A317A1
-:102F90006D67B6819D3971B89D69C99108DA67E599
-:102FA000293962C98DBB94E8D820C0F16B57F4B2BF
-:102FB000FC72921B0F48B54827FA6FD1AE6431A559
-:102FC00016E5DBC5CA0B5AACC547F0F75E07D0550E
-:102FD000067A9D817405F3CCECE9CF48CF33248386
-:102FE000C64BD1CD2D01E25B1C14E068F6985D085C
-:102FF000E72530B1B79A4AA6E4F15285FA668419FA
-:10300000E8E1D45A297EA894B7F3A13C05B8AE8173
-:10301000E7CD5D97C7B7496817C21FEACF366E770D
-:10302000433BD39F47CF4D09CAA2F6D297717F2E5B
-:103030000101A055F3F6380FD8598412689F7057D4
-:1030400053D75800CA62E827F3FEF41EDB05488E0A
-:10305000C769BD383E8E53A1C4D7A09CB1E878990A
-:10306000903B20572B55A0AF66961546BDD9DC5630
-:103070007E5EFBE586B05D7EDC5467D703734DBB97
-:10308000FCBF79F625B6F60B22E5B6F77FB6E80A5F
-:10309000DBFBC5D1AB6CF52FAFFA82ADFDD2D619F3
-:1030A000763FE9A7B9B49E35822F4782FB75212F61
-:1030B0007FE2B04FADB2E9FA44CDDBB04F6C9D3B3F
-:1030C000FC381427E6B0457D6972C5274B84CFDFF5
-:1030D000009B70FFE04F1F131E437CDEA6BF70B73E
-:1030E00066A23B4DF4437309ED2567FB138B619E8C
-:1030F000B47EFF26494487E7FA314FCF2F01E4160B
-:10310000E0E41C40FD9D2C5982FBE6CE35E8FD5DD8
-:1031100072B200EBBF61437BF3717F7DC962E49FB4
-:1031200066953D27E560BFB0C70DF38135C4DA80F1
-:103130003E5ADA7E741CED38C908B22558F7F812E9
-:10314000C8DFACC3F561D2C23BF0616F28FAA104BD
-:103150007048EDFDBF97F0FDF799817A98258B7245
-:10316000D17FC4A9D2F9B069066B457C9D68B4E3F0
-:10317000CD2BD6F17349A676CF31F3B7C8472725B3
-:103180009DAF4FC0BB4D32CFE27C16DCEFE6EA1AB2
-:10319000FB74702B722DC2FD23827B432B4B662B5D
-:1031A00023C37D0533DDF2A8E1F09C656656A6E7F2
-:1031B000B3805D333DBFDCCD2AD15E3D216585D72F
-:1031C000976239F48F5F03BE8A7DC3177EDC184E89
-:1031D0001753E55C9ABF59D8BB85ED52221BED53BE
-:1031E000E621FB95F53C647A50AE0911D7D2269DB5
-:1031F000C4F5B38E4633E949AD9719124B6F776E1C
-:10320000DFDBDCD4DE923796DCB2F069C9154B7E89
-:103210005978758E3F929CC1F1D43C843F3A494E17
-:10322000A7131DF03101E131AB71FFAC7D033732E3
-:10323000E6A91E79DF2C3905ED18FAFF23ED17E01A
-:1032400089EC3A5798119EDE0D0E2D7D0AD63DD0A1
-:10325000C6F5F5BB458CECC3336D570DE4207E3CC1
-:103260009E0AC44F219F8A150687D6A17CF5A9899D
-:103270007E84AB50E82F2FE3FAAB90193BAE46FFAC
-:10328000BEFDE4126C67ED4FAED89F66D81FF447C1
-:103290009A7D43C56827B951AF413B37C85D94CB90
-:1032A00085EDEFFF07EAC542875E4448583A1C594E
-:1032B000553BAE36D2C7FF6823DA97D6B8D4217D06
-:1032C000FF83DA49C46F61FBE6BB95806D7CE963DF
-:1032D000C48390DB68769D9BA714ED5539E10EA45D
-:1032E000E8C20997D56F243A61E9F394DBEA644FA9
-:1032F00038EBEEB06693CFEFFEB13CA7D5771E7AE0
-:10330000738EE7A46F271F083C7C0A3ADDC4E9945A
-:10331000CB058B6FFFB3E8346AED6B2CF78E23A8D7
-:103320005FBBB4F02C03ED84A11F723BC16D1C4246
-:103330003A8B495995F03EDAA192DD68D915FD6BBB
-:10334000FF7A4B193C3F512B931F71623DA7FB3D08
-:103350000F707BD4D2DB51A1B7D12E40BC82DD30BF
-:10336000E0E6A507C7F1AFBFB95402B83DC650BFEC
-:103370001BDBB71964AFE6D4C5F54628E315873CD7
-:10338000E38C945C4AC6F2F396C37E7D2BD7581625
-:1033900021FB3A3A7AAE3FF5FEC732D74FD34A58AF
-:1033A000DE6C182FB9550E3F08FD932EBB1EB3CA15
-:1033B000350AD797492F2B413F78A476438AA557E2
-:1033C000758DF665FEC071DCA791F6017640A738D1
-:1033D000E6393AE478877968FCA4DFAE874E0A3D87
-:1033E00064C1FF09F4EAC262A08FBD5266B83F1201
-:1033F000E3459F030060BFA32A3333B573AEFB1FC1
-:1034000044BF84ACD27C3B2A76CEC6FD8EC5947078
-:10341000FA7E58E55F285C7FE6CC6DC86D84766CDB
-:103420007DE67679A2DD63F7652D42FF0A50A7623B
-:10343000BC2614D3E7CDC678E4D4BC49E863FF18B2
-:10344000F50FCCBB3B72466FF17D227C14849491C6
-:10345000F1F1A62CF37D74F0ED1E70D7507E262579
-:103460000FC55F5A62EE8C7C6CC929A73C72EA39A1
-:10347000C934595BF570B9628DFB49F519C8872CC1
-:103480006554CA6E3FA7CF2E961E47900325328BF8
-:10349000F665F04FAF56389EFA633C4EA19A32E97A
-:1034A000AD994A1393004F1B828CE4411EEE35F216
-:1034B0006D038B030A583E0B0FF8509E046596204F
-:1034C000BFD5E9079A4DE8070639684C1F55D65F06
-:1034D00008CF83F357D239038B7079ABC37F9C8FAE
-:1034E0004CD2176E81D7686C12C539F39AEC72DC36
-:1034F0008D7E20C847BDC1F17CFE4C3A6F70B3B4DD
-:10350000E7B08EAB147FF03498F6AC9AD5207F5696
-:10351000EFBF6AD76218BFE6919BDFC672F2C17B2C
-:10352000F2BF0465DDE3BB6EC6B2E4B5E8D84CF18A
-:1035300054AB044E61721DC0E763863B67E476C6F8
-:103540007A25827635EC6307D24332569E85F4BDE8
-:103550004AE1FCDFBF400B607C46DDC2E5AA3A1FB2
-:103560009047F4CFFDF4E6943F4D7E852AFC24A5D8
-:103570005DA13842522FA378CBA12DB28625C8D9A0
-:1035800018CE63CDDF2BE2D49D22DEEA84AFB76490
-:10359000A818E5E089F51F917DA8E859E1D9305FC9
-:1035A000979F95101C225ED02CF62FB9B6DE931E85
-:1035B0002F52849FD37174CE80817430A084BD0655
-:1035C000F18D86E346B74C67187F99A58719DA1302
-:1035D0009DC2EF517C26C37DCDD6D94CF46BE195CD
-:1035E00016C2FE552C9CC0FEEDFD885B58AF793BA2
-:1035F000F2C10FAEE576C88952BBDC0612EA823D05
-:1036000065B38AD6AB489B4DC1495721CDFF5E2992
-:10361000107295D3EB1BB5531EDB0674F09CDBBC1C
-:103620004719F509F8C821D77F006C82FBF6A8641A
-:1036300097E75679D0C9476D12D985AAC9D73953AA
-:10364000F9B011F5E446B01B0B8DE1FCB2F1754603
-:1036500076E346E0BF586926FEA99650465C2CFFEB
-:10366000E4B5E74A18C7F8ACFCF3978A38A713FC0F
-:10367000037496403BE651C9E89C02EBFBCEBEC604
-:103680001F4F81D7CF1E58917D0D94DF8B6FBCFEED
-:103690001A98FFF6C7F764E33E3FFA2AF0D379FCA5
-:1036A000788B9F9AD1863D4F9CCD586BE727637DE1
-:1036B00005F1D35B0AD75FFD0B7EF7C6D5FF9F9F51
-:1036C000CEC74F6F2B409FD3FE74B6387A1EF9D603
-:1036D0005CC434B4B7A08D89741E0DDA4B9F9A4533
-:1036E000F85EE7E272CCEFF272BB23C4DF3BC7FBAC
-:1036F0001BF593C70F16947F763E5DE7333FFA3C88
-:10370000F81DE40EC99B13E3EC7CDFE9E274F72BB0
-:10371000D7275EDF3B5FF81CD607763DD977D7A960
-:10372000CC403F60E20B1E1216AF8EDB780459626C
-:103730001A3C0FE5F1F7EE3C929771B46386944A18
-:10374000EA6F326EC737D56C3EC2CF25062B168185
-:10375000BF3C07FE85F6C8753EEE57C0382C04E323
-:10376000AFF6468BD551341EF997AF3EBF2F88F286
-:10377000E5758F5982CF5952CDC5F301CBEE18991B
-:10378000DF55763ACDCF7A5A6304C7A94B358A57AD
-:10379000A2180B407D6BE9A514A764E1D87109EB71
-:1037A000A37486725C094616931DD2E63666417D87
-:1037B0002B1850B120D12DC94DA5BD37144039006B
-:1037C0007609BE5763733D1AFA2FA3640C42337710
-:1037D000DB47E4779F28E6F2B6630AA3739A810772
-:1037E000FE6DA98CF64EBB9BCE2DC06E247E8D0A3D
-:1037F000B9910C4E0FB5A09F51A48525A86F8AFDE5
-:10380000E2F8D7B83C313D93D3E3233CDED112E25A
-:10381000FEAED3EEDBFCF5CBDE3470BC1FBED6753E
-:103820003994AF3FF9F3D72F87776F7CEBB51A8CBC
-:103830007BBBEB345BDCD1CD8C37D1DE029F29A181
-:10384000A17C8E9D5C829B99F2EBA418E2275AE33F
-:103850008FE37A91B7113FC9290A3F5F84BF10C037
-:103860001710F075074F55D13CB1F7FF2393BCA754
-:10387000BFC9428F40BBCD79F7C7518EA4E69B44A8
-:10388000F2290AF209FDC8A8AF67C91A9ACF1F7EAC
-:1038900010FBFC11767572EABCF0D096792D88E7A2
-:1038A000B90B3C3AD2993BB6F96EA473E73ACFF81C
-:1038B0001EBC144373B6F9814FDC159AE925FB97BA
-:1038C0001DA6FD104D2CB8755020187780FECB56E4
-:1038D000B00CFD0DE88FEB047986F6B6D50FC8D88D
-:1038E000C4F59EF14DBF94E2FD225E61F5BB292631
-:1038F000D139C14DE5C006E5C3F1B4C127FFE46B82
-:1039000078EE12537485D341A8220D6FF8678F9B10
-:1039100071BAB86C9F5DEFC2FC0B4BF17D4C217A04
-:1039200071F2CBF8B8BDFD06DFF9CFF587EF27C7F9
-:10393000F344C16F567F0B3E8257CA145FB79FCBCB
-:10394000DC5467AFCF1D868FF3C3355DB59FDB3485
-:10395000F8ECE3CD0CDADFCF2EB2D73760FCE6937C
-:10396000ACDBC1774F8F31BFA37E06BFDE92BBEFCA
-:103970007B227F4BE3A86186E3F42FD83B7F1ED0E8
-:1039800041A1CEED8EC2F90B1B726B504E31916787
-:1039900092D9FE2814FA5E697F49C9417FD4E4EDCB
-:1039A000934BDE9A9183E7C5758CCED3A3EA3DB1E4
-:1039B0001C23658FF4ABE55988E7CFDF1EB9DB9B8D
-:1039C0009E7793B2471E78D5A8C9608FA8F748267E
-:1039D0008C336B09D82355E9F648AB8432287B0930
-:1039E000D823647744DF437C8D6497FCD8B2EFFD25
-:1039F00099EDEA3FA85CCF829EF9A7CFA267C6796E
-:103A0000CD7F513F077B605A89B13292810E3F5082
-:103A100079BCC3D29F8DC1848267E7A03755173C1C
-:103A2000BFB62EF9128AE30E7D6710D70DEB71B980
-:103A30006A3FFD7ACEA81C9E892ACF8319A9DFB7D9
-:103A400046F057BC9A57D82DF6FDEE5FF08E2EA3A8
-:103A5000FF027E0CFA2F495FD9368C0B9E89A91480
-:103A6000AF53E7AFDC3D17E909EC6C4ECFE7B7AFDA
-:103A7000AF1D926D7C3CED6C968DEFEB99FD9C6ECD
-:103A800086C77E4ED7A8DBCFE96685ECE774730C5A
-:103A9000FB39DDF595F6733AA77D3F73B4EBBFA70D
-:103AA0007D1F6A64C44F17B0EF819F6E427A1A89F6
-:103AB0009FAECB37EE8F64D8EF6A8DDBA9ABBD919B
-:103AC000054877D30C6ED74563EB291F302F0AF2D8
-:103AD000A694E28614F7B2E25A56DCCBCA0BB4E2E3
-:103AE00059CEF89515F7B2E258528CC7AD9A3DD130
-:103AF00015086F73FB4919E588FE1CCC838C609D0B
-:103B0000E30D8BCF7179D0D29E392EE78CBF8DD843
-:103B1000EE53F2D5E7A01FD6E37A2DFD007CFEE040
-:103B200067E173905BDB70BC7F417E1F45F2A49B15
-:103B3000F6AF02708D763AEC838671FA05A7F763CB
-:103B40003C4E3DEE26BEBD58FF17131D64D8B42869
-:103B5000F8E018CF8AC64A49BF587C63F189D33F41
-:103B60001EC61FFFD5FC7391FE31F0CFF75CE7D185
-:103B700047C01FCF23BEA75572FC3AF9C1A27F20D0
-:103B80008984548DFB1D4D607B8BDED98B6113E1E5
-:103B90009C28FC9A13A335F22F4E3CFFEFFC1CF639
-:103BA000794F789C5823BE9FD85D10DF569AE23338
-:103BB0008B9FDA3DD11FBBD2F240AC7CC7C31EF352
-:103BC000757C1E52FB12E8AF8466B3F00683F8ECF6
-:103BD000187FCEF9D41766143FFDCC7ED95E571CF2
-:103BE000CF875AA4A1A58CFC56A621DFAA429EBC71
-:103BF00098153D89F86C9E1E29E1F43434CE077087
-:103C0000FDA243217FEDB3F253F348F83F878FE8DD
-:103C100090AB76787E40BADC42F9160A69F10D5213
-:103C2000067925F01567E131B83ED8CF7F473CE6ED
-:103C30005531899623F8B8D963FEC1F5D9EC0F4503
-:103C4000AB4DF131E0CDA3A15CAC06BC950FC7DB59
-:103C500049175FBF93FE426A5246FA0F811CDD206E
-:103C6000A59D930ABC58EB19493E5B749A76DE1009
-:103C7000D2D2D7FBFFA85CB6E4E5E59EE864DC079A
-:103C8000B71911F2CFA4FD75CA99E176904CE78C73
-:103C900067C0EEC16E172B5FA79DF5E261099B7AA5
-:103CA00056A1F2DAB37478C2BE78369B4AF36C3E02
-:103CB00095F56773A99C7EF6122A679C1D4D65C316
-:103CC0005900064C9CC6B3A554CE3C7B0595B3CE9B
-:103CD0008EA772F6D9ABA8DD9CB393A8BCEEEC1707
-:103CE000A8BCFEEC142A9DF68FB15E25F96DC92F94
-:103CF0004BBE3BE5B725FFFEAFC9EF58C345D93FE3
-:103D0000A0FFBEAA9D477E8F242F80AFEFD3D2E5C0
-:103D1000444A3FDFAF7D06BE3E2EF814F8F73D8CD7
-:103D2000C378C08BA3385598C7A9028666609EC623
-:103D30003E6C025BEA2F8D9CC4B841F3028F1E03D8
-:103D4000B8074A35924FDB821A9DBB6D96F4D15C61
-:103D50001E2413487F3B431A8DB7ED8F8A17F31744
-:103D60005E1A5510C079BAFDB28EEDBF959BDC7717
-:103D70000B9EE34F61E14330DE8A3D7B3CE97EF8F8
-:103D80007E340E00BE40EC69C680AF378EFADD523D
-:103D90009CCF3795513C064A3353BED837DDE27C81
-:103DA0005A1D0A219EB6FA64D207DDBA47E4A1265D
-:103DB000075AD0CFAD93D9369877C3E877B620D8D5
-:103DC000EAB8B21D6550DF5957E6C54D7AFA950F2E
-:103DD00042644FC03B0405CA8428CD1CD89F4E6F57
-:103DE000D838DF799B620CAD4362C5FEEEEA91DB09
-:103DF0006DF20F84903E3A264DAEBC05E6EF9D5421
-:103E0000301AE7DF5E73D4860F45B7C753140C38FA
-:103E1000A21F5E97A4B8DA06D9D85106EB0B887CAE
-:103E20006B00B33292967760C1A184611D1CAE8491
-:103E3000C2D7C30AE0796E5D2296E4EB3531EEEA33
-:103E4000F32543E82F2A75A729DED6E94F2EA2BA1B
-:103E5000030E6BFCDF6A565E00E71B9FE09BE649A2
-:103E6000DF5E4479E4551AED5BB76B6801D6636B8E
-:103E70005DECF10CF19B0D829FB7559E3F2EA3FA8E
-:103E8000EC70747BEDFEA205CFFBA274C2D1EC1ADC
-:103E90001A9569FF3EEDFC175AF7E73D5FE708F911
-:103EA0000397BBEDFB1010F2BC79CAB743782E6EB6
-:103EB000C1D329C13ED47CFEFBD03C85CBEBCF7B6C
-:103EC000BDFFD3C6FDBDC6E32AC0A7B3CB31CE38F4
-:103ED000667208E3B53E2B1E1D8E537E5200E3D161
-:103EE000D4CB203DA4EA7C0C456509E44339FBC3EF
-:103EF00004EE9352AD190AC9D9CCFBAE8437515E9A
-:103F00009B933F2DB8E96FB2301DE8FCD06BC5A77D
-:103F10000D7532BF2F81F15F8559E7B33C3E6DF5DA
-:103F2000572B648A4753203B6D1C15F4309EE328C1
-:103F300018A7CE1B3EFF7753F4689FBF88C7C715ED
-:103F400095FB81EF491C1FB15715CAF7EC7A9ECB40
-:103F500037769C91FCEEAA35E85C6507FC8FFE4342
-:103F6000ACD61747BA551CF978672AA787508E5ADE
-:103F700071719A8F9F0F509C1BF314296E6EB00ABB
-:103F80007CDF2D40B3C651ADB87CE59A49D8CE6FE1
-:103F900030CF73B03E7F1D4B5C02F006DDAD5B2F72
-:103FA0002FCD100FAF5CF38D2761DEDD4F4DFFD5B8
-:103FB0009350DF25875FAD8376F95FAE23BC3AE38C
-:103FC000E1DB2A655347F9E0F31DC27D051B9AE842
-:103FD000E2D61E2986CFB37DBE837CBF5B430AE257
-:103FE00005F424E2C5EBCC8B4CC77719C2B17360E2
-:103FF0001EFCDBBB75DE329C17E1C6FCCA15BDF5A5
-:104000001AEA99E012FBF985BFC95EF756D9E1DCDF
-:104010002AF6EF42F4EFCC43EC31E72D42BA3D13E0
-:10402000D418CA9B8D6BAFBE91E4FE76858D2BCDE7
-:1040300040BF8E75756A2ED2FFDD46FDDE0AD41BA9
-:104040000D1AE5F574C7BD714CF1DE5E973A37B1D4
-:10405000D9EF86C6CFB16AE4843B931D2FCEC70249
-:10406000E219739C8375CF96C9AEE9EEE1F358E38C
-:1040700075D7BDE5413931D2B84F8F318FB8D19E58
-:104080008AE65DD4BD8BFB36BA385D4FD1E252294A
-:10409000DAA3FAC24550DF3C4E267B8809FFAFFB0E
-:1040A0005A7E9EF8B066D8EE576C9AB292EC869B18
-:1040B000DCBAE02FB00B27A4EE5B1CF09A2FB8E11E
-:1040C000B9FA1C8C04F6C07BB9E11B912E1A831F30
-:1040D000911D756B91AC237DADD8D348EBDAACCB99
-:1040E0002C8176AFDA4A466A136B35F13C00133502
-:1040F00091EEE6C01B99EE45240F75029C73C61520
-:104100004EDA063577512BE5B1341A12F961D70131
-:1041100066501EB4144754A90AFBCD7F07EDBE3983
-:10412000C15219FDFDEB54D6A0A5D9E760171F7346
-:10413000A7ADEBC4B83D41B90AE7877970FE451ECB
-:10414000BA4FE046FBF8CA947D3C1111996627FFEF
-:104150001A8D4A8C6714257E4F79DEDF4FCA382FBF
-:104160007B81556F933EB95F0DFEE52F713FE3CC28
-:10417000E8C754C3CF1A97F8BA26F649DC5B39EC86
-:1041800089FC06C7B7E20113357EBF79730B0BC7F5
-:10419000D2E22A9B9FFFF3E368AF5AF197737977D6
-:1041A000024E0BEE4D12CB223DEF89FEC19DEE1764
-:1041B000B364D9DC099F1FDC19F2E57CB5C04F63FD
-:1041C00005FFE4D55678516E8EC57C1FDC87762EB0
-:1041D0004F4CF82F3DDF4711CC170CB7F6CBC6700C
-:1041E000B9A4887B5340D712DAB1CE7C2005F37E88
-:1041F000260E971B0704FD5FE211F93F93D964EE89
-:1042000087DBCFAFFC4BB9DE67AD7919EFA17E5FDD
-:10421000E8FD17855F9910F71A8F8A7B8B2FAF33D4
-:10422000C8CF7B655D259503EBC2F4FCB57575546D
-:10423000A6EE57F179F3851DA662500DCFF97D2CBE
-:104240006E00BCFE516B064A91CFEBF8FDEEEEA678
-:10425000535BCAC96EE4E7169B8BAA1385E8BF00BF
-:10426000ACF95077F9FA3CFC9E97395859C0D51CE7
-:10427000E2FDBFFABCC24917BAB5FF8EFDF6B156D2
-:1042800086F22E60DAF73B3BECF46FF8FEBB8A2E29
-:104290006EDF7BF11FB08F5FB2F6FD6A7635FF3EB1
-:1042A000C3C5C963E4A34A2107C6003F1D007FDEE2
-:1042B000ADF07CF57C9EE76A8638BF992AAFC7C609
-:1042C0008BF62E4E426C208FE7B517F3F304EA8786
-:1042D00079E5F81EC3922FF0F816CB11F9EF63C5FC
-:1042E00038ABC5B813ABE9DE2E3FFF677D3A963E8B
-:1042F00096A47A2EF0019641D62A2132C7B041F217
-:10430000B78BA521AA1B929E85F532295CC6FDF0CC
-:1043100038E9CF72C5FC7605213F22F3785172311E
-:10432000D993A097512EC6D5C822942F1BDAB4304A
-:1043300060E25C9E1CDE9FC372435FCD009E7FC423
-:104340006232C91FE53996A55F49F61EE9AF0DEB4C
-:10435000F30E6653BE4692F2DCF77B4A6D7A6AA290
-:104360006FE1753AECD746914FE782FE2C43FEA9E8
-:10437000954F07E396647A6F951BFDDAA24C7EFF9A
-:10438000C31E49C43392A3290E28F6353E55CE7874
-:104390009F719F87DB358F9666B6A7197B90C6DB2A
-:1043A000EFD11DE3265BE8FE8CCEE31B592E93F282
-:1043B0006B36B6F17BFA16FE46835D8BF6F0C6BE11
-:1043C000F9B391BF63952AE59BC3FA7D883F97C8EF
-:1043D0004BDE383E78309BC7254A514EF723FE6AA4
-:1043E000D3F0175CD984F8EB7895E7F7823EF7B104
-:1043F0000CF98616FE5C3EF6C54CEFADB26394B682
-:1044000028D3BDE1A31ECB4E4F96723AE1F8CBBA4A
-:10441000568D646A9F10F82E2963D1F3E1AFDFA3B4
-:10442000DBC6B5CE7D9511E25D922F4171AE891A42
-:10443000B733362CE678DDF0FC35C7A369E710BF4B
-:10444000C421A7A4E2C156DCD8D29BED9EE83F7AF6
-:1044500046A5F425FB3E23B9CB5EF01CC47DCB7092
-:104460000E71CA539BE11CA2E7E2BEEF3256F0ED9B
-:10447000A12D47E7E13C7F55C7C8BE0A3CC3E7CD45
-:10448000D5595C2EC5EF149812C659AE89E8F56867
-:10449000BFB9DA9989F9336345DCA6B0BD4F41BA9B
-:1044A00008C25E164A78AF2919C3EF998CDDCDC8D2
-:1044B0004F540B67AE5A6F08519A961FA5B0A17E54
-:1044C0005A5FBB663C5E4A60FD14F5C318F13ED0EE
-:1044D0003EF3572837C744A294870BFD627EB42F62
-:1044E000041E0BBC9C6F9737842509DA0783498A21
-:1044F0004F3AE5FA18C0CF2569F65B40D4D92A2E89
-:10450000A765F80FF57C7EC42EB7C739EE45071CAA
-:10451000792FB95E91EF6EC9ED22BEA913D441394E
-:10452000935F9ED2AF0EF8508655A7FA07ACFA6794
-:10453000840F0881E8D98207AF52A2DCDDE3D2BF45
-:10454000F214EAE77A8DE79189FB72D902EF3E74A3
-:1045500098A1DDC094574CDCD71D61FE5D9A3353A2
-:10456000E7911F9A5D67DDA7E3F795A18C619C2E0B
-:104570005BCC6FDDABCB66C69BE5400FD96692EE98
-:10458000D5E9D677154C96C03C1CDD27531E9DEE11
-:104590008B907CEA59E0D1F13B1F9AB8A7E712F75C
-:1045A000C7B3CDD374BF2E7BD8FAF8FD3A0BEEEC2F
-:1045B000ACAA37CB0DDB3CEB31BE0D6B1F9DF17E02
-:1045C0005D1DF793B24D1E87481B9FEED7ED985A9D
-:1045D00066BB5F47F3A01F27E8CFBA67E784EB5CB1
-:1045E000BF9ACC76DA84B0DD8EB8D0FD3A57C8DEFB
-:1045F0007EC705F2B33EF1FD3A818761ED1CF6A05E
-:10460000CBB24347C90CF7EF4C834CDF11C9FD28EF
-:10461000199921515C82F4BD65E7E5F1A1FEDBD972
-:104620007979565EBFC3CEB3ECB7DCD9767C3BED6F
-:104630003E775584FA5CAC9DB70BFF01F4F290D73E
-:1046400061E73565A60FA7BCC86783BBAF84718ED1
-:10465000D6FE48C17CB55DB9FCFB476C987FF0D6AF
-:104660000CDA171FFFDED1AE29FD2A7EFFE6774B5D
-:1046700019D949561CC12D60DE5524AFA7B07BD790
-:1046800043849FA0C043137E80AC8670151F477C77
-:10469000667A316F21BF8951A3C28A30ED3B7E9685
-:1046A00040A64B5B3115F5783D62250D4F333CF646
-:1046B000EF0434EAF98E7DB4EFF3B973F007F9F73C
-:1046C00014E618F67DB7FC24346771BEEB2BED744D
-:1046D00070428A0C2AD0E5E9AC5261FF0CEAA82F9F
-:1046E000BBD7BAC86E7C6849D9D62BD15F0DCA3A00
-:1046F0003F8E1C1A87F651F351D38B76DEF6C874C1
-:10470000EF3878FF50871246F3F0A9256B5EC57A23
-:104710006CB78BECA0A7FAE615AC48E3BBCDBB1792
-:104720002C5C8CEF3B5CA4DF57ECB96FA03488FDA8
-:104730005DB5E9DF9B6AD9789F8E7EDB1BB5DE8C89
-:1047400076CCD559DC2ED9A82529FEB4719EC6D0C9
-:10475000E5DA58523F7A05DA0FD76819EF93DF95FB
-:10476000E5E6F7F95CAD12CAF7C268E67B0156BB15
-:10477000B135BFA5738CE06C99A11FE7BA7E9E8C02
-:10478000F587605F7529454F79829E3616DDBBB58A
-:1047900002D73790F9DEA155AECD1AC7E93462E7EA
-:1047A000735761D3685CB7CB1D19A847E22A94758B
-:1047B0008C8BB8DCAD919BD11EBDDA8514CE3677DB
-:1047C000FCB06111EE4B58D2259827A84656119D92
-:1047D00005B318EA8386259156C44B21E83F0CEDBA
-:1047E0001516FD92CE290AEB34E685BA67494FC209
-:1047F00005EF3D15D1AB10EF2FADE5DF79290CFAB0
-:10480000E85E5061849FC315B6BB199A0C1BC105A5
-:1048100076917F20519CC8C947D6BA9A977239BE03
-:104820007BED6F4765FADE4C455619E1D56BD8D75D
-:10483000ED41BD0BE34C35079710BE6BDC2C4EFCF5
-:10484000EB26FADE55EB22B8764D39F91584EB7775
-:10485000BFCFA2FDBE969912C2953FC4CF59AD7984
-:10486000F29B06151E0FE77CE8E43B8B1F9CF0EDE6
-:104870009C3D8FCEE336B3C1F988EFD85999E868EB
-:1048800073D11A6F7A5CB455D01FEC03C99798CED8
-:1048900068BF957F65EB311F76E3172395C81F6FBF
-:1048A0007BF9BDD5FB966AB48E87E66A146F7CC827
-:1048B000DF4A747F6AA32B7C08C151F585B89FBB82
-:1048C0008B2BC2186FFB3B3C7C4EF30F768FFA525A
-:1048D00025E2F38B7FC8E2E34C51AD717E46F45E76
-:1048E000EB25386728ED3F5B8176E8127932E54E9B
-:1048F000AF5A42F2CB25E4F8CB4BF2EAD14F09DCB8
-:10490000B09C7179C8E31481B5D5FC3E8343EE2792
-:10491000EAD4DD33689778FCA75EC8BBB1374CAFEB
-:10492000C775D60BBD60AA99BFCB982BDA170E4579
-:10493000D0241B16FFC915FA63EC6EC773A117725A
-:1049400087C5C1072B6E06F9F3A52C61478E10F7BA
-:10495000D9B5641EF1C319E0078A4B979C24FA8FDE
-:10496000819C40BBF90D29195A91761E667D67EE30
-:1049700027221E14314B294FF82D110FFAA9F8EEFA
-:10498000DC3B221E745CC4837E2EE241FF80F1205A
-:10499000FC7E98F772DAB771751FF5631C6767CDF7
-:1049A000028F01E34CD5075F4220BF680EFA44FE38
-:1049B0003DC11BB4F4D0DCF3C7A91208971BE35226
-:1049C0001CCE97C5F7E85E11700D08B85E137059DC
-:1049D0007A10E506D2191BABEA99E461506D95F0A7
-:1049E000BC17E5457F90E405CF130FAE918C09C34A
-:1049F000E5048C373ADD4EB7E8EFD4281FD1B17308
-:104A0000FC47B3F8BDC397D6CEDACF8269F228B29D
-:104A10007015D25D3EEC0FCAA3681397E351BC77C3
-:104A2000912657AD781AEC4898F4CE0D1C4F23C947
-:104A3000970BC99542875CD98D7205EABB51AE04CC
-:104A4000D3E54A6B3FAE3B887285A5F45030F2C97E
-:104A5000E4CACFBC65B63889255FAE0636263B3141
-:104A60000CFAD4FFE9F5E9DB424E5C48AF5AF91F76
-:104A70000193915EDF837921E8CF8C67740F473112
-:104A800007299F28B7DDC5301F642B76198DFECC12
-:104A900042CA07D931DFA3235D3C2C254288CF7D54
-:104AA000528F97EF8BDE8FF6C2B6093C4EB2E38F82
-:104AB000F778D1CE7EE9F682009EE3F4E65A7920BB
-:104AC000FAE25BA17EAA91119DACD8B3C296F7F031
-:104AD000F3AC3CC2476E0CE40FE0E3E1DBB9FED17E
-:104AE0000D9E070265C63C10B74FC483D45808E931
-:104AF000639B14F5501CA651263DD51BE6F92BBD32
-:104B0000E097E3F9606FC3CE39A89F37DC2A33CA38
-:104B100017AFECB907E54CC7848506F2A56B74D9CD
-:104B20009B688E6FF0C9DEF43C523C4ED0AAF9B9B6
-:104B3000A128CD1C0079B3D734CE777F54157E1FC2
-:104B4000F6779F270FBE3337341AE304BD8D0B432E
-:104B5000386FEFA848288FF253C6903DB071D4A6A5
-:104B6000C5187FEA58AEB1743B69D87C41BB7D6DF6
-:104B7000C519D5069E3FD22173FF32579C4F035F64
-:104B80005522DED2D78970AA26CF1FC1F52A7CBD57
-:104B9000F47DD3DC06F00FABF8FAD17FD57DFA684F
-:104BA000941F6A03CF1FD9ECD717A3DFE884C31A79
-:104BB000FFDA6CC9E61FE956DE42FD1A7E8E58C444
-:104BC000F3167A5DE7CF5BE810F2D0F21B47C2879D
-:104BD000CB714EDDEBB5C7012D78AE14A5138E91C8
-:104BE000F2053EEDFC175AF7E73DDF4879046BB25A
-:104BF00025DBFD8A5C2B9FA5714D08E58405CFE67A
-:104C00000BE48F7C5AB89A1B79FBCF7BBDFFD3C6D0
-:104C1000ADCFE6FA11F87400EF51764C9C19423989
-:104C2000948AC70C0D94A33D27EE335AF9232E9D89
-:104C3000FF5355F977EEE4EC22FACEB23A9DE78FB6
-:104C4000D05F863C904D8CCD467F4715F11B279F4A
-:104C50005E087E67DEC8CD3EE137461DF3893C1114
-:104C6000E6C83B51433CBFC4CA27E992607DC154AA
-:104C70003EC888F33AF0365EC8FDF71CFD87AD3BB1
-:104C8000CCEF575AF927C3F248A6CAFB710B86E549
-:104C900091887C949E5C23CEF3C4795E09AA4D8CE6
-:104CA000E70DCB23993A3D84DF949C5622FADDC070
-:104CB000E8FBBB3D5E5EEF9DC3E2F8BDB35EAC2397
-:104CC0003FD532CA6B19965F32750DE14963916524
-:104CD000FC7C879FF75B7870E6975C90DE2E9047B0
-:104CE00012F459DFA388D03C3DFEF04FEA083E990C
-:104CF000CEE30BBE743C9C3EFE253E2E277B441E1D
-:104D00005E4FAE3D1FEF3EB12F15A29D737FF52282
-:104D10004ED75DF53AC5DDDD0D3C5E39EC3B103517
-:104D2000767FC019CF3B21E4F585D6EF8CEB6D1B68
-:104D3000E1BED9021FCFE37A68C921CA8B3DB30A0D
-:104D4000F42CE0EB61CC67A9B9F87C96D7B3783E38
-:104D50004BAF51BFF052D463518DA13CEDC57C16D1
-:104D600078BFA161847C16114FB4E2A323E5B3E4BC
-:104D70009E3B8FB7E7B3F4DECAF3597A7BF83CD693
-:104D800078BD0DD564678D34EED3634CD987FB5F56
-:104D90007171E7A7D34A227F86F92B3DA59AFEA021
-:104DA00081F4C2E9B9AB5123FAEE72713F36369AFB
-:104DB000FBCD4C8D8716429B2DFEC4228A278BBCCF
-:104DC0008C5E717FFEEFB30C9B7DDCD9F8DD10DAD1
-:104DD000F540872FEB9C4F689C7CB5743DD880CC08
-:104DE000ADB798E8530E64F338822B746CA02E8D07
-:104DF0004EB7087D87F891013FB9D2397C45E5026D
-:104E00008AEED3DF1A419F6F64F3F92D3A64EAA466
-:104E1000303FFF631528472CFF75583B0F6F374C09
-:104E2000FE38E4480FE6B761C592273758F2C44E02
-:104E30009796FC600E39734E9ECCE176FA39790272
-:104E4000F2033F75E69443BD5EAE2F2C78DC2898C4
-:104E5000418EBCE70ADBE2344EB973213EFABCE571
-:104E6000CE4BD9F9C2FEE0722788B4817C936D9D48
-:104E700023F27B0F67A63E48F2D0A3F2757B228C0B
-:104E80007E2700EB28CF3D788E9251AE574B146FA2
-:104E900010E722F9E2FB830FBBC2949FF630F03398
-:104EA000FA79130CA77D76FE7305E779D2C36BBF41
-:104EB000C6FD33C037FA5D172B872C39F161365F99
-:104EC000F739FA32399C167DA5D1337D5FC0A25FD8
-:104ED0006B5C8B8E193268C179E855D03586A32971
-:104EE0004E1D93E21807B1F2C8ACF1DEF0717B649D
-:104EF000A4FB5556BBEF587ED7B978B01ED0299F7A
-:104F0000AC87EE9BB32E4E7F73D86E754D15E513AF
-:104F1000A88CF2092225E8CF1CF6D9FD622B1F6C64
-:104F20005A493884726283B0D3AD3C322B2FEDB036
-:104F30002FD73A67B6E5A76D18E17EF69BE7F073C9
-:104F4000F1DF3FC1EFB6ADF69A8FA35C047C99E226
-:104F50007B4E9487668DFB5D81A7D73DE693BECFE0
-:104F6000707FF2C52C7BDE55A7CF70C405385E2755
-:104F7000EAB17ABA8F17E5F7AA9CE7EA23DD7F75D5
-:104F8000DEDB3B77FF559CBF377BA22F13FC2FF254
-:104F9000FC373D1C3DD8C93EBFF51CF09A3FC1F11E
-:104FA0003B057F4F0BF27B3BEF7BA26FE3F3EB18EC
-:104FB000F7AB2D3BE730B683FEFE97416A03BD6C2D
-:104FC000AAE5F45A54C9E8FBE3D35B797DC752FEE6
-:104FD0005DD3FED7F9BD8F6D51FE3D53E8D7270352
-:104FE0005E768CE7FA707F15EFB71FEF37219F567B
-:104FF00070BB2B0FA3F70A8AEB2895D36B7ABC13EF
-:10500000E0FD81A532C545F708BE083093E21CDB00
-:105010002AF93CBB2AE427C4F76816DD02F5CED98D
-:105020002B27E3FD92ED229EB26FF1CA2730AFEF3E
-:105030008340B9A0BB04DD7BED397E1BC5471E5AFA
-:105040009227AD8435EE3B9839BFA5CAAF8A7E3131
-:10505000B788278932A161B9D51479ABAD4C7C8F63
-:105060003DA661FCE999419EB7DABDFA99633351D7
-:105070001F57CA9467D63578D47B19AEBB8EE7F537
-:1050800014A90929DD7FF1FA5DDC4EAB39EA31AABA
-:1050900086B77F66F028D1DD76C0BB92E6FFC902F5
-:1050A000CE6EF427A0DF5E57CFC04C68B7775C9E0A
-:1050B000143352ED46FB39FF752F91C577E8197D02
-:1050C000C7A1D33CE541B9D989E71FD0BEBBC6CA49
-:1050D0004BEDA17B597BE74C9E8379E2DB6EE0C10F
-:1050E000D2AEF021F2937B6673BB6CAF04ED605FD0
-:1050F000F6B568D7D33DA6561E278232639CA81703
-:10510000138111AFE2DC8E525F60DECE86BE019C61
-:10511000A7A88E7FDFA2A82673FF17026EEABFCF73
-:1051200015A3F8E748FBF7AF3E8ECFCE2A7E5EC0D0
-:10513000589CE252BB85DFC5D4A891FE9DD0960055
-:10514000C7CF4E1733315EE6ABD348AFCB6183ECAC
-:10515000503FD88F188FDB26C516637E486C92C6E9
-:105160001E278C98DE7118BF9B901746FADB24250A
-:1051700042F85DE5D8381EDF3E1AD949F7AE0E80F9
-:105180001D4DE16096203DD51DCDA3FB504723D595
-:1051900083D4DF57A1BB2D8D8279F3F4A148C626B5
-:1051A0005DB6692BDA359D53641DF3363BA5FA28AD
-:1051B0008E17CBF5501CD935651EED9F6B549E9410
-:1051C000AE8F6EF473BD30342172A31FD6159A7260
-:1051D0002A17E396DB6B5FD987FBF7C8FD1EA2A3F6
-:1051E000476A07EFC679F69FBDEA7894F8929FD791
-:1051F0003D5A7BBA14ED9E5D4DA772117FC5189F75
-:10520000037D585CC1E368A801C93E537BD8CD80BB
-:10521000C7E2368D1969FAD8CBF8791EFEF92693C4
-:10522000DCA3BF67064F795A70BC252C7169809E3C
-:105230007B309E65C999E23A96280079B87FC53BD4
-:1052400031CC937B646201DDA32C12EF4972C278EA
-:105250002562BCFE375E598FED1EAD2E30505E14B8
-:105260000F0CCD4325515C759AE26C21EBFE47D4BF
-:10527000D87F2BD1A74CDFA92C0EBFF317B88E8097
-:10528000AF8FF41CB4A7B899731D8189E67D7EC0E9
-:10529000E337A5D657C70553FE18FD213FDECBEFF8
-:1052A000651767FDC35C252DDFB644C40536498309
-:1052B000B3C92E7D80DBE163599CE45C7155EC6ED3
-:1052C0009E6F1BA57C5BE7BCDBFDE7F4AB44F7A856
-:1052D000F39BC4BD12FE3B3625E2776C9C741F0A1B
-:1052E000E557755C95AAEF8B9E22FA7F5A33EECA7A
-:1052F000F4BD877D422E6C12FE9835FED85C3EBE12
-:10530000557F54E7F4F8F4CB79D757C17AFEAAADAC
-:105310006C12C63F778CE0C7AD0C70FACB1E000B49
-:1053200007F440FF6BAF79319FE56999AD4239557C
-:105330005F95F024AB041E617CF2C560FC03E16F55
-:105340007B502E7D35504970AD98CAE3069D550FB0
-:10535000D2395048E77A07F913E5BB2F149330EEA2
-:10536000BDBC86E98744BC2506F8A7BBF3324BE5F4
-:10537000F56FCF253F077885DFABC1DCA4C9E2F725
-:1053800027CAF19C68D3DD227F56467C778A7980D4
-:105390006F699E0345629CFBB8FD8FFE05F62F17D3
-:1053A000F394D77DF76BA8C78B744E1729F8FA3C96
-:1053B000045FABCC083E35F12AFAA1DB271518486B
-:1053C000370742E1B79BA0BE7C914AF1F8F21A0E72
-:1053D000C78156997E0FC85FA71DA4FB6326E88B83
-:1053E000347C1962DEA29A8484E75A462B5F17B494
-:1053F000F3A25C34C2000FD40DB1AE73F04FD208EB
-:10540000FE22CF20E6169DC3C34A1C0FE877651D18
-:10541000EFE70FF56D4139B6BC8EC30DFA9DE0295B
-:105420000A6B0751DF1785F878CB013F87A4145C1E
-:10543000D9165C7532E55F15D56807D10FCE16F029
-:10544000AD0C7378FA5F3F3520F1F10C1C2F5BC077
-:105450009B2DD64F09BB05423FC0784FB912F57856
-:105460002FE7D414661CE2B3513CCB7ABFAB15F0E6
-:1054700000F8F18B79D86E37F1132C31F6B1CC7F6F
-:105480003FC4488B5B54ECD66C75BFD83FD6C59FE4
-:10549000931F472A91D765E1D7ADACB2F763356961
-:1054A000F532BC5FC6E97DFDB5FCBCE3C0046E1FF0
-:1054B000A1DF718EBF91CEA7188F7505F1BD46FA99
-:1054C000AEA4DD3E6E716BC174940FC5030FCF9314
-:1054D000613D45F73259C9217A96CEC93F98EFDB35
-:1054E0006B12747F367B209287F2AEA4356F3A7EC2
-:1054F000FF2D7B204AF5EC815693E79F810B938724
-:10550000F97A69F394A29CE6F974AC55EB43B95669
-:105510009B0E27BC2F79B9672EF6DF7CF72BA39162
-:105520007F0B1CFD3D39DC7F287E195A0570FED3A8
-:105530006BB1BD15DFC94688F3A87C19CB621FC8C3
-:1055400063284B44FE9D252F3A27BC3329EA13F4E8
-:1055500043F9782C916EE73B4B683F5EB48F49E787
-:105560006D779ADA8D146F1A08F0785340D8AB3DF6
-:10557000CCD84FFABD86E77BF8F039E88FBE9AA306
-:10558000D3693FFB5818E9B9B8ED4FEE74797D73D4
-:10559000A054DC834E10DD6B255974BE077C4CDFB4
-:1055A000373DA0B6D2396B5F113FD73C3AE71509BA
-:1055B000F159F41CCFD3B6ECE5E93589103EEF7A0A
-:1055C000357A19F1E708F6A7656F3AD77349FD8375
-:1055D000240FC6469917CFD7FCAB55CA632D890255
-:1055E0005C55281780A40B01FE9AD87AA41B23CA05
-:1055F000EBC66A51AE82F26AB06FD70D94FFD295B6
-:105600001A776B05D8B5683F0DEEF6DC80F64A2BAD
-:10561000582306DA8BA73CF83D95EED6E9F988E7E2
-:105620006722967D999070FCA29F9A642FD6EA9A81
-:105630008E719809EEC4E8F473BA0373DEA9A6EF7D
-:1056400089CDBFB87CB291F409C222A7E991FEAA24
-:10565000A3A45F9EF08F273D64E9154B8FD088206F
-:105660005F6E117CD465243C12C92BE05D80F3167B
-:10567000942340C7FE222ECF410E733967E993BBB6
-:10568000B9DEB7E4678518E71694B7D0AFBBF689E3
-:10569000DC1B50AE0839EB0F1933F17CAE42C85712
-:1056A000A6C6249CEFC014FEBDCA80439E56B4F229
-:1056B00071BA428CE809F4D041A49B034509BA278A
-:1056C0007EA0F5A8947ECFD4D27781D624C3FD1FC7
-:1056D00057C7E5E0382157BFE337387D7AB85C3DDE
-:1056E000A7F784BCDD6A1E65E2BBB019F3B0FE5EAD
-:1056F000E8F39E8A43E4176CBBF514E1D38A8786EE
-:10570000443CB4BBEA2D7ABF3DCAEF01EC32A7CFCF
-:1057100021F823CB35CA3FAD393AA70CFD8DA6E55C
-:105720001ADA75270305D6F9977721DA93ADABC856
-:10573000FEF5897D7C28CC84DFA9919F75DFD26F2F
-:105740000F60FF10F84592818DFA3C6EA473FC9EA9
-:1057500002E23B3A489D7D35067D07C2B98EEF05D2
-:10576000F87769FDD1E4C038DA5799AEF4F86A18D1
-:10577000F99DCBC1AFC36177AB61EF0478BFBB4983
-:10578000D6D7B354FFFF15E0F96813FDFC9EC2CED7
-:10579000C5A7B7609C6FE752F19D3307FCF735F65C
-:1057A00079149A07630294C79CF17BFB55FE2CFE8B
-:1057B000FD859ABE01B4E703551CAE170306C7FB6F
-:1057C00020C7634F44263EDA3558ED457DE7B41BCC
-:1057D0001FC97E7712CF6BB1EB9B0BD58B1D727FF0
-:1057E00082BBEF3A9277DF94495E31C6E59DC4648F
-:1057F000037F57A325C0E9A94AC8EB0E57623FE6CD
-:1058000015743CEB63EB8D145D1489313B5BE58CC7
-:10581000BF9F7628A0F0FD1FBEEFDC7E10FBFEA42C
-:10582000C0C385F61FC32C684FF7C5378DB903E594
-:10583000782BF79FFB126F51DE51D1EC85E4F71CFA
-:10584000397829F9034555A6EDF735B347F05B2BB9
-:10585000723CE78D078C248FF7ADEE203F7BDF6035
-:10586000E67B3105393C2FAD0FE4257EDF64A4F9DA
-:10587000F51CCE7FFF14107437E71DFA5E469A9E22
-:105880007D59E859D2B7C52A8B2969790E1304FED0
-:105890009CFA93A971CFA53544E784BF7DE2FCE271
-:1058A000215326BC5B748EE7078857588729E890F8
-:1058B000CE377A58DC837C136BE2791E4EB827F81A
-:1058C000E58B5A5F3087FB21E7E613FEFA443F87FA
-:1058D0007B67EDFD74CF11E60B217D483FF88FD338
-:1058E000741FEA5917FD9EED8C675D098C69DD799F
-:1058F00090FFDEA2FCA297E0FCE7C3FCFBEA093FB5
-:10590000B7C77EADF3DF2BFAAA7BB0FB0B501F7A33
-:105910005661644FC6417101BD9E16F4CA9EE3F5FF
-:10592000955E5EBDF360FF321C6FD5733C0FF3CE06
-:10593000E76FBBF10B50BF6DC0457706EE7C7CBDB9
-:105940003606EAB7C7A53EACFF663AA3DFFB8CE597
-:105950006914E7FA4D60B06001E0FB83751E665C78
-:105960008671D2C182F980873BE24FCFC47E773CFB
-:105970002585916D673CFBF82BA301AE3BBF215100
-:10598000FED7578E64DBECC2D3B09469F07ECD4174
-:10599000FEBB91B7B19E99888F3B1FEFA5DF3FB447
-:1059A000F0F9C1BA4A66A4FD6ED89DDF789A7ECF21
-:1059B000F0AE6F49F4FB8A77C9FC1ED13F3FEF5D23
-:1059C000F4980FD7B75EBBD48FEBDAAC61BBDBE2E8
-:1059D0002DDFC594A63BE207B599F0FE8E0307B50F
-:1059E00095E897B95933EA9FAF1CB9C226774EEFB5
-:1059F00053C83F5893EBA1FBF5CC6786E64D18BE24
-:105A0000CF1FAC6336B8EEB0E2046A5C9B9BD6DE77
-:105A1000A573FFF72B4714DB3C961D103BC6F542E0
-:105A2000EC6FFD143FB7F66F8DF0BBADFD5B63050A
-:105A3000E2D5A1C999E0E9C6FD00787AD6E954EE2D
-:105A40005C17A272F73A83F6692FE211CA2E01772A
-:105A5000602AABC7EFF3074C9E769CD764D6E3DD94
-:105A6000B2BC08AF172C89921F32921D63957B5DE3
-:105A7000D116F4213B77F4CF52C1EED9AB45EFC636
-:105A8000C897DEF1EAAC06A8FF4D4E64630EC99BD1
-:105A9000B0817C67F9E75FCFE17277D3688DF0BDA5
-:105AA00077E9E4C714CBFFC2B8DFD2954FA03D0120
-:105AB000FDB7E710DF86E93B5D23F52F585667EB0E
-:105AC0005FB06C95D57F0FF5F79CBFFFDE65D7D82B
-:105AD000E75F7687D5FF1182DF777EF80B9AA7DA2A
-:105AE000E76F5E4DFDBFEAE6FB3B94EBA17CFA0E4F
-:105AF0006F38E122FF99D1F739D4BC4B0FD1F7931E
-:105B0000CEC599064DD4B3BEA772AB518EA5E86839
-:105B1000FA37711D7EE0AE743ACAA9CBB2F155AE28
-:105B20009967ABE7CF1E636B3F2A52667B5FB8E88D
-:105B300072075DFA74CA83655C9F9A18E70438B5EA
-:105B400031FC7B4DF5633CB4BEFB5FF452FDFE6B54
-:105B5000F8FAEE1FE3233E26DD05FB7EBF16BD32BD
-:105B6000DD3E86754918F27A468F0EE4D4A63F379B
-:105B7000647C9EA5F0DFB1CB72737DB9B974F2631A
-:105B8000B1347C6E29067A80FADB399A2DCEB3B90E
-:105B90007865A8256D9E4DC5DAA24355FCF92D68A0
-:105BA000C7EB91BFC3F9BEAA0D5D8AF6AB731E7732
-:105BB000599D6D1E4FC92A9A27E998C75DB2CA310F
-:105BC0008F67D121F15CCC730AE964A47936975DC3
-:105BD000635F4FC91D34CFAF719EDAB4F594DCE139
-:105BE00098278BAF079E8B797E73DEF5944FB5AF08
-:105BF00067EC6A9AE7DF1DF3B8C7AE76CCE3A3790A
-:105C0000F039CEC38AB81FA5B98756D2FEFFC0CBE4
-:105C1000300EA4B9A37F4D9754FEDE4B71616865C9
-:105C200062BBFF03D8CCA6FA008000000000000091
-:105C30001F8B080000000000000BE57D097854452B
-:105C4000B670DDBEF7F69274773AFB4208378010E3
-:105C500034C40E840C203A0D41061DC0E00A2ED03B
-:105C600061C99E74449C87A34E1AA28888DA286A68
-:105C700050601A04071CD0C0040810B001757006EB
-:105C800035BEE7B8CC82CD2241884983A8F866F1B9
-:105C9000AF73AA6EFADE4E079837F3FF6FDEFBE3B1
-:105CA0003753D4ADFD6C75CEA953D52427819051BF
-:105CB000841C8CA3E90842BE89715FEDB012F23DED
-:105CC000FCFD90D03F2F21C93C4D21642EE17FFE89
-:105CD000C5022924A4D6CCB273364FCD5A08694BDD
-:105CE000515A4901FDC70A9BF30A8590CE9622E3DB
-:105CF000ECDC707F6A3AD7279F0CE6B0B6DF93F0F2
-:105D000038DE7124A78E8E5F16E7C0F9A8F993F5E7
-:105D1000346F22E4583DC1B45D26338BE9F713F5A7
-:105D2000740283B5F35D88ED4E4AF49F49345D25D6
-:105D3000F8BD025DD7F20F64320087F93087AEE319
-:105D400076BE8CB9BE5842CCE179784CC405ED42A0
-:105D5000BB4CFE75027C75F531A4D1A43191107550
-:105D6000BEFD09F9D3BEC96F0B76CCF6318C24E4A5
-:105D7000CE255BDF826A1F09257DE7D1F54E6B5E7C
-:105D80002EF7A1F94E3938C369D5F4334D3E06EBF1
-:105D900036D3FFA09FE96E9AD78C7F57B93E7F0F0D
-:105DA00091C2F96C42AE72F4E7F8E0E32A7E19F092
-:105DB000753B5D533A45E13D900E836207E26B8689
-:105DC00083B555E7E379502601988F144C26B950D6
-:105DD000928CF5DC504FE939BF19B2D9554CF139E5
-:105DE000E30111E11839DFE0BE5897218FA68D5FDE
-:105DF000C9A4FFA5E73F7381BE9C78D9782A5C557A
-:105E00003AB863DAD8674F68E863BAFB86674FE849
-:105E1000E0345597BFA76EBAAEFECC0525BAF21294
-:105E20006F85AE7CF6927B75F9B9BE0774F5CB1A17
-:105E300017EACA2BFC8FEBCAAB362ED7E56B9A5606
-:105E4000EAEA7B5AD6EACA0DFB86DC44281C1B7E94
-:105E500027121385E3D7D6934F5D9304A9E404B8C2
-:105E60009FAA4F43BA3E5DAF605A0BB4370AF8673A
-:105E7000B8D94DF1E48909959278421EF68D59B250
-:105E8000640CCD1B69F9684AEDBE714BBC99842C3A
-:105E9000712848F762A3910428A90A24A19BAE4364
-:105EA000A2A63C7889F246890486F72C1783D1BFD5
-:105EB0007709A14119741DDE4F4D6483D093CFC380
-:105EC0007C49FA90B4DECB3B0CA4BC49237736382E
-:105ED0000C389F64C7B80D0E4A0FD546C6EFD5DB08
-:105EE000D2C7113BE40383EAAC1719AF894E2615DC
-:105EF000FA61FC52E1EF13E65FC4DF001DDF0F8E95
-:105F000073AF77D0F13AF68BD3601E247030EB96E6
-:105F1000A130BE6B037C272DB49374CADFF5AE6746
-:105F20004F5C41C827F51331FD7D7DF1B3276442F5
-:105F3000FE583F0DF347EADD9806EBCB313D565F47
-:105F400087E527EA1760FE64BD17D353F54B303D54
-:105F50005DEFC3F28EFA46CC77D6FB3155F980CA95
-:105F6000A399C5C0A7C5C506E0D37916C2FF58FEE0
-:105F70001C5F8348FFDD867CED4C03BE3E67FD66FB
-:105F80005006A5B7739F5062CAEE1D4E9174D73B61
-:105F9000FE5C06C05FA99F124F62CF724B0CC38F8D
-:105FA000C54026122A7F1EBFC248243A7ECC1B570A
-:105FB000AD13B3F1BB04A443370EE7545B94FE0763
-:105FC00012C4D7A5F0A4D63FF9E29F0B67E5027E85
-:105FD000FA239DC41C14EB18DE5E7602DE2E053F0C
-:105FE00089F357241C8537FE9415A4F5BF4C56E160
-:105FF000D99645687A8BA3F814D0C1B96613AEEB75
-:106000005C6BAC9F401F8E24A48BDEE1C6E651B5CD
-:10601000D1E2D3CA879AA6789F5E5EA4FBB4F2E26F
-:10602000DCA197EDC0F7F3D244DF89E1401F2E4E8B
-:106030001F8CEED4FE6B9AB27D565D3FFAFC399F01
-:1060400030B109E5BC1277EBD0DEE7392FCD88E31C
-:106050009CDE38200EC63D5D6FF6C1381DF50E1F63
-:106060001B37CDA7A5CBEA05B1BE1389E1F9F5D65B
-:10607000EF3F7B7E843493E36682A0FF7E40EFF5A2
-:106080007BC58774DE580CF4D12A7F03FB4E4C8EFF
-:10609000BAEF489857FBF534895ED3D5F07DB36EDF
-:1060A0003CDA4E39A9E2A9FFC5F02E9193EA3AA94C
-:1060B0009C1C4A6537D0292566C4B39BF61847FB5C
-:1060C000EB92AC4B043A8E295EC1720F0C44E9A9E5
-:1060D000C61C34BA1504771BE859B346AA7CAFDC5A
-:1060E000F1074A725FFC56264BA1FC2FB4775A2E5B
-:1060F000F3D239A4D84EE878B39AAB26819CFC62DF
-:10610000C78FB99EE22B84757F490C13814FBE2443
-:10611000FF6E1FAED1CBA6C41BD9FC96B0FDD94BE8
-:10612000FF83F5513D4DB75F9735EAF3A5E4E614DB
-:10613000E087D21532F1D3B957C07EAFAE9BF2FDE6
-:1061400075F14C8F2B23758B414F592A936980EF42
-:10615000590E22F5A172A266E7EAC2129ABF2DDE9D
-:106160008074759AEA770A954315094C8FA94CF209
-:106170001B5DB4FC78F3F0DBAF21D0DEBF18E49AEE
-:10618000D7469C1B484FB8CF5EA29FDFA5E61F39BC
-:106190005F4216E17CD579A8FDAAF310370A2E7F5D
-:1061A000147D7676BC10D693697A5FBC5E7F5D0005
-:1061B000798D7EFB70447E51445EA51399D3892965
-:1061C000DEBD203E19E8223401F53442E923375C74
-:1061D000CF18AEF7F0C5EA99A09E88F5165DAC9E83
-:1061E00025DCDF63D1EAD5ECDCB2C34BE9A9F2F5DB
-:1061F000E7EC84CAF32F245F8A937EAFDEF0A81DFC
-:10620000E0744AF2DA01DF5FF8C589D1E0B5AF1B6F
-:106210005E2EAB007604923685FBAB4F4C013DE918
-:106220009B0DB243A4553C1B4D0113A5DFDAE68A52
-:1062300049240FF34759FEB1B322E45BF4F8ACFCF8
-:10624000C573298A0DF1C0F46D1240BDA376FDE738
-:1062500013408E7B4808E930B21D8C7F2101F9BEC6
-:10626000C418D7B39CCE13F5640FE7334FF313670D
-:10627000453BA437B4039F7922E8A8BC7B7F091A69
-:106280008BE97C5E8FB7259DBC8A667F407E00F2DD
-:1062900040850BF133BDA261D30B7947E9BC3AD6F7
-:1062A000FFD62EE46AE508A3C7734DB37FBE5BE952
-:1062B0005DDE7472BB28DCCE8FED9416A607915676
-:1062C0009656CB013BE89DD56B6527A55452BDE59D
-:1062D000E5575E047BED5313DA6B555BDEFA6834E9
-:1062E000CD576D959326B1E5588594307E3CF47F6B
-:1062F0000B8685F151F9ABB78CCA50F6FDA18430FD
-:106300005EAAB6EE3792A13DE158D4B4DF18B44688
-:10631000C14FD3D109A0B7346CFAD608F6D717FB12
-:1063200004929ADDB37DF9DAB7705F0438213E3903
-:10633000BEBAF1D7036F8129BB0BB09E03E4E5A57C
-:10634000F0E6E372BA66A78DC4D37994FFDEE49FCA
-:1063500004F87CED3E3BACA75DAA6374BEFAD11491
-:10636000171DBF5CF6A6383065DFCBD7DC8FF4573E
-:1063700026D4A538909F5CE90694DDDE7458E7DCEE
-:1063800055B7E13A4B891BE9B07CB558ECA7E9D782
-:106390001299B8350A9F1426303E695F47914BD752
-:1063A000D90E7A3FE8DBFF2EFA37A07D7A2F01F96C
-:1063B0007F3F5F33DD2931FFB599E1CB9A6050ED26
-:1063C00045B38E7ED73FD606783ADDD7950AF3A43B
-:1063D00070F072B809DFD37EC50FAE4F6578228AA0
-:1063E00054C8DBD1FDA008BE43FD36D965C9D3B57D
-:1063F000E3F2938D3F9F8F4FE71D03FB5B7B0AD535
-:10640000EFA3AC6F16AC0FF745BACF69E84CC3EFFA
-:106410008CFFD73FCEF85DE57FFFD489507EFE43E9
-:10642000C647D00EF6133AAF402A96EFBF5540F953
-:10643000602281687CBE5EE67CAE2FF7507E053F11
-:10644000814A2774FE9210A7A5173A4E02E201ED89
-:1064500095D215B4BD56BF8171B19E31FC5DB3AF0D
-:106460009471B9909F40E5416C581E9055C997A50D
-:106470004756CBC40B2A67F5A726B4C7ABB7C8C528
-:10648000B0FE339B0F7E7427A5F3334D2ADFEAE578
-:106490006A24DF966FDB20009D46F2ED9972BA8B7D
-:1064A00047E35BFA3D2ADF9607FF9FCA55157ED367
-:1064B00013F4F294CAC77EA042F406C748F9F8352F
-:1064C000E85BC93DE523FDFB9014F6A44395FE541B
-:1064D000BAA31A5C3F90EBDDF4A9D25F377DAAF432
-:1064E00017B95E3DFC22CBFB838D44E9A47817D518
-:1064F000E8283EAB5B05BF09F9DCFB769F0284937D
-:106500000BB737E27BBB4F9236EF8FC83745D47756
-:1065100045E48B23EABB23F275BAFAD52D078D0427
-:10652000F11FD0D5332D78891C8F620FAAFB8FA75E
-:10653000F9ACD10B7491193282DC931751D50DFC53
-:106540006B7B45F4AF7529217B02FDFEA885D969D7
-:106550005D0E9E8F67F950B27131C83DF57BC84220
-:10656000D03EEF2A0ED9E335F6FFD156D1AED0F2A8
-:10657000A09F4CD4FA11C2F369407C07496FE5CC67
-:106580006FD81563CFC3F162B2FC407FD78BD6AC16
-:106590000560EFF94427251F3267E11D7642E9AC1B
-:1065A000AB75C04DD3E8F7B9EF88A06E53F4B8A42B
-:1065B000744A37B3391D9F22DEE7C7D0F5CD6E652B
-:1065C0007AF89C65D1E9BE92D72FB5CE37827CA5EB
-:1065D0007AF431AD5FB4922C43BA2B5F15F1BDF55F
-:1065E000C7C81F9511FCE1E6F6C35E953FF2493E30
-:1065F000CA174298FDCBE5F2F562EE4DD3281EBADC
-:106600000E89C4A4803D2B92C5B0CECD821FFC055F
-:10661000C49B8C7C564B42280F553875001F0DEEDD
-:106620005D4E756CFF53E183402F3BFE90F7124D9A
-:106630003B767C3A680FE4777E9CF507D2B37ED137
-:10664000BEEF66C07ED6B5CF847EB1AE7DBFCE7ABA
-:1066500010F2BB4DE817EB5A6472011F78F7D9FCB2
-:106660005740795F663F34ECFD362F88FBEB23887B
-:10667000B75309CC7E39D7FAE7234212A47455A048
-:106680003FEC8B453EF2ECB6A0BDDEB5F7DB42B782
-:10669000F59FB79E5A2371233DDAC8B46D40BFF110
-:1066A000CC7FECD933EAE58574FC9AE6FDC6D9B413
-:1066B000BCE88DBFE681FCECDAC6F4A24E39B886A0
-:1066C0003809F92AA1EC7119FC7CC04C19843C9D55
-:1066D000B8F1066F6E34B83038745138C0BA285CDF
-:1066E000CA41EEF7068F984423D2FBBF1E3CCECEA4
-:1066F0006072ED0704FC4261B8082EF6DDE6370B48
-:10670000B87EF67DDFB7792077CE342D447DE55213
-:10671000EB1E92F8AF4A07FFD5750B81CB59F7C432
-:106720007F597C33FA7F2F41C17946F2414F3ADFDE
-:10673000F913CCBF6673E27C2F93FFCBFFB7E17DEB
-:106740001BC5BBFDD2787FEC7F2CDEDFE178B7394B
-:106750004C20CFF6FE15FDACEAFA2FB5EE57FE87BA
-:10676000AE5BD5E36F34D41D9E4AEB1F268115C561
-:10677000749E6F665EFFE1545AFAEB5EF4938F12DB
-:10678000991DF86B503EC0FE4B13FC1BD0AE6076DB
-:10679000531161FB7A514E19EA1B45394FA0DE4077
-:1067A000A4BAC3F9141E3766CD752EC5EAC33E716F
-:1067B000D3FC8FD2AF75A2FF30C27E3C2810974029
-:1067C000F5D8A22B6F380476CCF84C3960CAC3F4E4
-:1067D00028A46FDB27B2EF56BDDD3409EC1D8D1DFB
-:1067E0007883A22F9FC0FB9B48E61D9E4AC79F98B7
-:1067F000293AFCD06EAC4F82F54CA2CCEDD39C1F55
-:106800004D88E86F1BD531B5FEB5BF177EE624660F
-:1068100067FE9A8E9F0FF0CB94D17F7849F801BC28
-:10682000115EF9FEA5A05B494E84DF8D19351C9ED3
-:10683000CCAE96787BC9BAB80DF85622D42E667ABB
-:1068400019DAD3AA5DDC1B9C09B7B3253EA40A77ED
-:106850002993DAD9FAFE101E2A3EFE5E3CA8F8FB08
-:1068600047F1F17BC0C788303E32CF3B24E0CF22D6
-:106870006E0F8C3FDF26623ED329E1F90BB707C6C6
-:106880005AE325B007AE953E10812FCBCCBB2AE151
-:106890001CC1EC1490AE077718D0DE31170808F74A
-:1068A0009C4609F31F181C2340D19E72CDCE330F96
-:1068B00010F027BB8C4CF12E66FEFCBF7CFFFD98D0
-:1068C00042F0ABB0BF32FABFC914BE735691400C50
-:1068D0005DE75C897821C4612E5DD4319D3F589F6E
-:1068E00087BFEB52C2FD5CAA7E6F72E49F9DEEA44F
-:1068F00072EBD81584EC829439FB25ADDDFC835610
-:10690000062FCF61E2EF8F72C125166BCED9FE2D17
-:1069100089C98F9D7FDC361CFC6763BB72E3983CA2
-:106920002D30005D7AB85D708E287110AF70AE7535
-:10693000401C9E231E126DEE287E9B4DDC9EFE6544
-:106940003D3A9549D77AE213C16E2221F4DF7AD716
-:106950009BA39E07CF4A3270BAE178A37F62219C45
-:106960005BB0F1E7D2A6715ABC754CFA42CAEB890A
-:1069700007F83BA6395FF947E10BF63BC077932553
-:1069800038A1388AFC98CFE137E5C077E8EFBCB290
-:1069900075AD01E8F7CAF506DDF9647512B7BB8677
-:1069A000916130AF29072CB602C0CB21D169A1EB90
-:1069B000F3B49E35BAA39C7345C213FA073FFAABF2
-:1069C00049EC5C608FDC341BE0BAE74B33F152FCDE
-:1069D000EE32FAAAA2CD332985C9B9B9A4E9BEBC61
-:1069E000EC7F3DF88EEDB206C6819DB99E70BF4624
-:1069F00024FD11A4E3731B891FF653B04B412E9C59
-:106A0000DB4C703FA7207912EC6ACAEF3FD4FA69D9
-:106A100006B76CFD25E801B5AD82C340CB6BA5A0E0
-:106A200011FCB19E967811F6DD7C85B8F07C587229
-:106A30000CBD55C317AF264908DF83A3F7DC05E378
-:106A40007ED56124A08FB8DE0CD961DFFEAA75382F
-:106A5000F2416FEBFA553DA91C2F433F4C1E46D225
-:106A600043EEE6185DFE1AD19D01FC35C5149CEF7E
-:106A70008C82BF49C98CCE2E5BBEF9FF3F936F1F3E
-:106A8000AAF2CD2D166BF8282999D1BD46BEA54690
-:106A9000936FF3042515E03E6FEF8054C0EBBC7795
-:106AA000E4E468F26D4B3D3BFF7B9DF223A45DCD9A
-:106AB00054BE5DAD916FCD54BE65F76CF7B7CB9505
-:106AC0006FFEFF1EFEDB02F22DCA7AE339FC54F999
-:106AD00096D77A14E55B5EB381281ABF9339F952D1
-:106AE000F24D48BE15F4E143B233360AFD6CE1FACB
-:106AF000F7EB3C6E0FC60139F7A364765E7AB97284
-:106B00002E3D85F1C925E5DC7F139C5539376F3B58
-:106B10009573D9D1E890C9B979BBA89C13801E9907
-:106B20009C9BB79730FF5B847CCBE921DF08D6AF15
-:106B30000DB0F69E96EC17EEA6FD0D73C94E33AD63
-:106B40003F2C2CEF4668E5DD8F922584730F797713
-:106B5000E8F2E4DD762EEFA81CEB0FF235923E9CB6
-:106B6000AD31BAFC9E51ED9B7F05FCF2AE88E78B00
-:106B70001F18D839D07BA3DA0B80BE56F2F97838CB
-:106B8000FD75D67BB1FFA237D9FA6A3633FF776D30
-:106B900033D30F6BD78B7E85FE73C2E8EF8C30FF4B
-:106BA0008ABD0249A5F9A926DFF35690C1BF900915
-:106BB0003B172393F235F430676415FAF11B2CF67A
-:106BC0007584F2F11C8998C15F5F659DF005F8E955
-:106BD000AB4632FF7E15FF4E78DC801A0759DA7219
-:106BE000EFDB7D48CFF881292686C7292F0BFEB51C
-:106BF000D910BFA42FAF8A887F7C8AAF73AA1844AC
-:106C0000B890F7C5A8710C4F45C2E31087075DBF68
-:106C10000E1E7E212A3C284627E5A784D75FF16E09
-:106C20007031F8F32B560A78EEABC223729D2A7CA2
-:106C300054FF74156FEF69BD17CFFD23D7AFC2AFF7
-:106C4000C7BA557846ACDF97CCCFBDF2C97088A7DC
-:106C5000A1F480F2C3FB1B0A073A4EF1D82B52B5C0
-:106C6000F2F8790E87E1BEB145E904E046EA807E9C
-:106C70004A1BEF7D3B9DAE7FC427CA30D826AF1993
-:106C80006D72C339EA264B08E59B4A5FED2ABDF3D6
-:106C90007EF664D48D437BBD4570807EE10958103B
-:106CA0008E1E4A67165AE5E0CA6F2670383A4CC8FD
-:106CB000577CDFA17037D0FA13D47D88C21DF866E7
-:106CC00078EB593CCF2D20213C2FA96D149C01BAA3
-:106CD0008EDA16062F55DED23FAB161F51E8518AC9
-:106CE000468F049CC485E17DB08AD79B62F27D0407
-:106CF000E7305328BDAF25613CE6D0FF008F917887
-:106D000052E17929FAFC9CEB1F5B008E5680578874
-:106D1000E95101BA2FD8C2E51EC9AB8363D18B17E5
-:106D2000187DED1514384FE88613D02B2D1FD1CACE
-:106D3000E815E0A600DC5B4B44C89752F82666F7DE
-:106D40005C279C5F6AF9B762EF51D6FF6AC149A21E
-:106D5000D0AFBAEEDEE8F71FA5DBF608BA7DCF129A
-:106D60003A3C1CE876AFC0FC08ADF1BA7347530A51
-:106D70003B77DF64A1F40DE75DEFC8CE754A4F3E67
-:106D8000BFC0E109FABFA2F14B0D8105C059E04631
-:106D900033C69FE13CFA33FD522B5FB75848F2AD42
-:106DA00005BDF76FE4F6406FFA8D9A1F0AE381DCA8
-:106DB0006BA1E3E584C78B94EFAABD7FA97525A6D7
-:106DC000FC63EBEA8EDF246D78FE648A773F98845B
-:106DD000FE1F169F743B8F4FA233403D4B532F2D08
-:106DE0007944EFF5489A19F7E1FB785CFCF5A29538
-:106DF00078E93ABE72C948A77497FEDD1890CBE3D4
-:106E0000E83E4293AF0E8FF8F86E2C17F13CEAA6DD
-:106E100077136BE09CEE261046F4FB4DF902EEBFB3
-:106E20001F4067A3408F3513978993302D1FF98337
-:106E300078F41BE5AFF71529949F866DF43740EA87
-:106E40002C0A25BD07F01B2B12805F9B2BB108F687
-:106E5000AFFB3E27F9A282FB2CF633EC1049867A71
-:106E6000A35DC9680E8C6A5E5104FED1A907AD56B8
-:106E7000A0F39C5506E2D6D0EF68E26F8073F8511C
-:106E8000275CB700FF95537D01FCCEE5AD6B1BEC95
-:106E9000905F253815DABFC7EB9E60A7F3DAD2788A
-:106EA00076C255C087B41E74E359C5EA79D60B4E35
-:106EB00008952D6D5D8EF138A5EB05E280FA7E8197
-:106EC0009859BF7E33ED77CB2ADA9EE6CBA03DF40E
-:106ED000BBFEEC87B7009F1F1659FBCDECDCBA94C4
-:106EE000B653805ED7DF8BFD55AC12481AEDAF7CF0
-:106EF0003393FFE58765279437EF5F89FBD8243A02
-:106F00005E7A36C8FBC078C893E18203FD9D99770D
-:106F1000225F7771BE261DD398DC10789EDB0DAA08
-:106F2000DE742085C507973A171A13693FEF8D4C19
-:106F3000CE8630014FCB593C8F3E41E1ECA670FE2E
-:106F400080C7731C1C79DC18D4EC3F9FA50C403A19
-:106F50009CD33216E31CE692628C7398328AE96BFA
-:106F6000EF5F6BF10B745EEFCBA14CF87EF05A1320
-:106F7000EABF9D5B643C2FEEEC1B44FF74FB2A9937
-:106F800040BC46C32A11E562FB66B68F8BAB6F9B94
-:106F9000900EF0DB2038416E1E5C5564847DADDDC3
-:106FA0002F60FBA2D5F7A7303B86C943D56E2B7562
-:106FB00054E8F68F48F9A6CABF1A0E87483957A376
-:106FC000EE331172AE06CE9BED90EABF7B8895C979
-:106FD0003FD0FB01EF81EF907E6B0FCB04F47EE19D
-:106FE00078C7048CDB827D93968F6A155C70CE5FC8
-:106FF000FE89C98FFAAABF64E64F417E7F6A22826A
-:107000000271F014EE542E8C3485FEF82CFDFEC572
-:1070100007668890A17452827056E3450B36B0F82B
-:1070200096820F56A494021CC627A29C2D6B14892D
-:107030005B232FBE105CB7DCC9E4B16383461E1529
-:10704000187DA5B07F3952991C5436C8103342B60A
-:1070500073F944F56917E80D15BB96A71869BDC506
-:107060003C1EA462EFF2142A1A4803EC5BB47E853E
-:1070700091F55FB14F70ACD5F4AFB657FB53FB3110
-:10708000EED2F733602FCF5F663FEA3CD4F17BD37B
-:10709000C747FEC7851502ED6FE4FB2206298F3C2A
-:1070A0003E6980F6BC434D55FF6BE18706E2D2C0D6
-:1070B0006DE41F63884B4317CD23287F53BC4D6E6F
-:1070C00061FA50F388A3C69A02CC3B809F6BB99FAC
-:1070D000B6763C3BB76ACEFFE011E0EF490502D23D
-:1070E00001F1BA8D8949A8072970BE5056C0DA97B8
-:1070F000D1F6C077CD2B191F5279A080BCA85DB501
-:107100007C02D65F2F28D07FF3DA12DCE7CB478AE8
-:1071100004CBD71F45BDA3BCE56812F02BE5CF1506
-:10712000B0EFD68E3139803F54BE53F9F87D99C502
-:107130008710B36328DC03284B51A2F2AF78983054
-:107140003B75B38C7CE719C9F8F2FD2D22F2F3C12F
-:107150006BEF98007CD8B941E8858F299F1684F998
-:10716000545CCDE275CA36317BE5E02A261FDA9BF6
-:10717000999E58B45A9E0CF9B27765C2FC5E4C1FBA
-:10718000BC5C7EEEA1A76C8CCECFBDF1EF14B9E94B
-:10719000A3FBE8FC6E7A8DCE5F09C3ABE8BA07ECBF
-:1071A000E8A7BF6E3AAE579543A5128B679AE35B8B
-:1071B000C8E27D2516F7F677CF2B621E8FA5D8C2C1
-:1071C0007244047A8F6771D2EB65A4F7487EFC475E
-:1071D000F9E89FC5D7DB391DA9F311F7B2F61057AF
-:1071E00016A070FCF5E69731AEF5CB578F4E013CFB
-:1071F00057EDA1F44BD7DBB9D9460220B7243FEEB7
-:107200003795CD22C68F132950788B4DCB9F2C3EBE
-:10721000A9EA751BD24DE53616775AB9E3781EC632
-:107220008B2C0A61DC95F755AE6F7A837940DF9538
-:10723000128B938AE4F7B1A94CFFECD8153B0DD61D
-:10724000216CDC8FE7AD954D77C8407FDDF223558B
-:1072500056EBE139A697D22F9CB3C3FCA60ED5CE30
-:107260006F21E2A96313E3FFCA16D96F81F96D5C40
-:107270008BFE6CCFC6B3181F5FF4FA16F423785A4E
-:10728000447D5CE44611CFB3688AE75691F189B535
-:10729000CD3578EE56DBC4E3FF22E2E2AA5EDFBB27
-:1072A000C34B4153F5AB5FD8411E9C6EDB60077842
-:1072B000D2FE30AEF0BAF3922E3EAAF77860973E37
-:1072C000DEB0E9711E6F38B99DE4F58C373C0DFFD7
-:1072D00080FD2635225E7363228FEF0E141647F170
-:1072E000E777DFFBD9F2F51A8893EFD876660DCCF5
-:1072F000BFFA6F5FAD81F826B2CF82FB94E7D5DF8E
-:10730000615CB1DA6E612AA3B7CE4DBFC0B8ECCED6
-:107310004F4D68EF74EE6DCF82F8B6CEADDFA5802D
-:107320007F6EFEDEEBD17F397F7B512A8922EFD53C
-:1073300014E8D37F1971E191F838D87C10E3B0BE1E
-:10734000FCC484F2AD3B7EB4A986C5E52A3C6E74CC
-:1073500073F4387C35CEB1B6F9969BAE0579DDCCA9
-:10736000F4BBEEB8C74BC58B7E48F17AF565E06F8C
-:10737000338F0B6E9A1C355EF44BF807C5D3CF5391
-:10738000F5F1A25F37CFFDF98B50D69CD86BBC6866
-:10739000E032E0A6C6F957A7BA5E4D053EDA16EB15
-:1073A0004D6378F34F12400FFC3A0BEE479C92432B
-:1073B000180712DA6B7240DC63E5DE8F915F3AB733
-:1073C0007F80FE56C2E3EC3B49F71F8B8716F83AE5
-:1073D000D7DB589C29873FC4A12A76FCCEE34D1900
-:1073E0001DAB71A8BDC59F0653F9FD617EEFA08658
-:1073F000DA4D2C4E3D1C972A8C047C1DD5C5F5AA70
-:10740000EB8EECCFC1E56838AE3A7A9CAF1A47D81C
-:10741000135F6C5F51E3A63BD7F2786BFA3D7318AC
-:10742000C4C9B1FDDCE3173E8E865F35AEFA0F119D
-:10743000F855D7D71B5FA8FC79A979FF57E1F26E01
-:107440002AF367ABF0E9F84B7439FD0DE7776AB7BB
-:107450007E9DAAB16F6772BB55859B3ADFC54D4CC7
-:10746000AFE8D8C8EC8748FEA6EB71458BB397D23E
-:1074700098FE5BDBB23F0FE450C7815D9CEE185D68
-:10748000D76E3ECAE274A9DCF66BE536617EE4C8CD
-:10749000FEECBC3F4F6BF4FE3C9BCF46EDEFB4E4FB
-:1074A000BA03E67FBA8DE951A79BC489FE28FD5F28
-:1074B000E0FB52F7BA6D468C9712ED31A84FCDB76D
-:1074C0008DFC242E095223C6FD342CE471420F3B5F
-:1074D000D300CE0DB61B09CCE751808FC6FF203BF1
-:1074E000DC04F43839ADB84054C2F355CB8D4906AD
-:1074F000E2D7E25F0A64827C3F92DF2E437F9F45A2
-:10750000F84D3E93C8E2543AAFCFBC8273A1D2BBD0
-:10751000DEADE6DD0F893A3F47AD297404F477F21A
-:107520008605FDD6E23E8B17FD666B2CB8CE83DB5D
-:10753000BF7D05E0D5F9731361E7089430A85C2896
-:10754000E3FE8BF6EDDFAEF933E899D0988E5FB6A7
-:1075500086D607FD7A732CDA035DDBE2F2509F7C5E
-:10756000E3C1292037CA600F033DEFF5547F03EDD7
-:10757000EF6432CB9FDCD217EF13546DB361BCE1E3
-:10758000C1ED3B6B41FE77BE1E0BC7D1E44B39F812
-:1075900037C87BF6C491B50AEA818A76BFAD2092DE
-:1075A000A2D5F3AA20AF8B7F2168A7A33F8ED27309
-:1075B000554B1CDE1FD1D4E3FCECCD60F7650219FE
-:1075C000C077549FD48DA396DF9AD69FDFEF0DFD31
-:1075D00084BDAFC0EA7B8CA15296F76530BE6DC307
-:1075E000FA252ABDF2F29EFDB2FA33D3FAEBEAA9EC
-:1075F000ED6B4DA42E1A1F54A709FC7EEF5F0747C1
-:107600007BCF22CAFCF1FBFD02F11A400FD86AC100
-:1076100038AE6A636010C4B7EF30B2F3916A7B6032
-:1076200010C4B7EFE1F2AF3A86E6E9F70C3E0FA8D7
-:107630000F79620EBE06F8AED969214BC17E7FC3B9
-:10764000E6023CD7ECF8F6E44B0510CF168B7EAB88
-:107650009A37FE0DF15F630ACC00FA0F6D35917514
-:10766000B47EC7D677B2408FE8900359091739F72F
-:10767000A96932E9CEB1D5759CAEF70F84FBEBEA70
-:10768000BDC5CA5EE4C5DE34A68F2E4F733D9D8610
-:107690007C6D75A0BC86FE44E8A76580F65E73A588
-:1076A000125D8EAD4A9375F768C5F03DC555D0EFB4
-:1076B0009724B83883A2A44608E1F979E5C6B34314
-:1076C000C11EFEEC6757E1B9D667C6D05090DB9F6C
-:1076D0006585866AE5F1A97AB322C9E897C0B46BDB
-:1076E000EDD9D20C02F1839669D1E4D396B4589CBB
-:1076F00047E543B151EF83EEE6F4B61A6830998D51
-:107700000B7E0875DCCF8C7E23CC23375DC1F2CA9B
-:107710004CBF11BE576DDC3540F7EE84E4C37A945C
-:10772000BF101E156485B1C0DA53AE542CB02A12B6
-:10773000DE8F96FEB39BDEC4309ED0C909716A1CF1
-:10774000877467423FA87A1F40928BCD002F232970
-:10775000764822A0DA877C1A439A30B5527584EDB8
-:10776000437504E28A4EF1F35B93A43C0DF2C374BB
-:107770004844797E29B8FD3ACD8EF3364975C489DF
-:107780007AC72407E8D582D74DBEA7F4D050BF7181
-:10779000C00976FEEF8278380C8DA3F3B33BDEFE92
-:1077A0000EF4034A6768677BAF23FE063A9E646463
-:1077B00079328EF8A39DC777703C10EF7E943F56C8
-:1077C00012FE0BD17C2C4A283A6EDCDF46829D6B80
-:1077D000759000E84DB1561288A5A935573AADE528
-:1077E0005F3B61F9FE949C41AE39C6E8CB23E99A30
-:1077F00038A5F3DD7251C4F6E723DA9FBF587B1535
-:107800001E1EF3806C76FF9DC12586AFC13BCE79ED
-:107810002108F0C8B33B1B008FC6D09107011E7929
-:10782000566627263512AD1D37209DC9AB4704B6D5
-:107830005FD2BF62ABA63FE230A3FFF4710EF7EE5A
-:10784000FAAA5FA5477D8B0470ED51DFD25BFD98EE
-:10785000E8F56DBDCD2736FA7CE27BE9DF1BBD7E06
-:10786000ED1B1FBF1750E023931B1231A8F7A00791
-:10787000A483BD157724A58451053B2788C05B0CE4
-:10788000D01FA58798819AEFF07FB91AFCF58F82F7
-:107890007F1240BA2BE1F3A1796B3A9DDF9D7CBA50
-:1078A000E3D7B373CCBBE7333FD29D0FB1FB424765
-:1078B0007FC6EEEDDFDDC8ECEDBB17B0733352CE03
-:1078C000EE0139E87F30DE3DD009C5F73D3EC11FEE
-:1078D000C886777022F4D7EEF776EE97A07E4984BB
-:1078E0003F46A527F5DED26CAE5F6773FA9C4B422C
-:1078F00036E0FBC87BF4CD692C2E8D9A632E58DFC1
-:107900005D7C7DEA3EE05D4E72E05D00D110E38477
-:10791000F31191DF5B257623BBB77A6B824EFE9C19
-:10792000CB51E260BF236FF2EFFC3DA2793728A96B
-:10793000DA7B5ED285587C7FA44176A6815C942F49
-:10794000FC9828942F8C17061045730F8DEA77C882
-:10795000ECB283A01F4772149332D00BE3399D25FC
-:10796000DDD8AD87BD4FE1326FB982F760EF486770
-:10797000FBCBD28CE2B94017A27DA4D36DED895721
-:10798000EF76B6BE06585F76CF7937189D4ED44352
-:107990006FA41A04FA7B9C66988F68523E56803F0B
-:1079A0007F2B13B0FF7BC281E1F35C52821FE25F49
-:1079B000E6D8971E01BA5D56EFC073B425F5399825
-:1079C0002EAD4F433D7471BD1353152E66A7CF25C1
-:1079D00052389B07B2FECC0E37D333E83E04F11782
-:1079E00092A32E007973661D01FDD7D20D1F1FC211
-:1079F000C7D89D7763DE04799ACA8D9310BEB43DD3
-:107A000029033F6A867B19C0C7A25C49140D5D98A3
-:107A1000D286E9F23DE0A6D2C71606BF2705461F6B
-:107A200091F07B526E53E0FCF9C91BBADFB541F807
-:107A300051759FC1EF37EC7CAE57F83912509F9DBE
-:107A400053B8784603FDF4043F877CAC7E24C2EB38
-:107A50007188EB1A0CF6810B5311E047E9C894EBDF
-:107A600025226D6F52D89C4DD66297A180D12EC031
-:107A70004FB432789AD2EAF03CCE6C65F012AD5E2B
-:107A8000848B6C65F012AD8CDE8C3C2F01FC866320
-:107A90007BFC4EE1D79C3E02F0305A072F63D2B8F0
-:107AA000CB83DF4A0A3F3A8F24CE5F917048827BB6
-:107AB0000AB961BEEA4DAF7B8EAE1FF6F117287C86
-:107AC000204DEEC57E4CCE607234C950B75F06784B
-:107AD0002410BEBF7849662161A18AF097E6250A85
-:107AE000E405360FB25E8F57D12145BCFBA6BC0022
-:107AF00074B0E21DD900E7A4E2821FEBEE938AD3B3
-:107B00005CF10AC2D32DC0FEFC44BD82F85B0E7846
-:107B10001C0CFB23B3C71EE5F87C0CF804F1CBF872
-:107B2000E349CE2F4F733E6970B2FB13CB26B2B838
-:107B3000ACA47C037F0F2D40B4714FF1CE2662A41C
-:107B4000F3421D5BC134807AC62726FF15B45D6CF5
-:107B50002E71019DC47FF2801FD74A8AD3412F8A9C
-:107B6000E7FA2F19A3C44FC78BB40189D921541444
-:107B7000A25DD36688F60E5683F38019FCA6BDCDB0
-:107B800067FFD41D4897A5576378304974174F9FF6
-:107B90004BF3D6C658F40FC63ADD858F029F37DA0D
-:107BA000904EAD74FE651ABCC7F682D717336E309F
-:107BB00064503A144169A3F87DA6718005E0FC9CED
-:107BC0005C9C0EF2F539BECF521C28DA73A80E2E3B
-:107BD00027ED0557EAECD915B20BDB39C6E8E5C04D
-:107BE0000A2E7713C6EBE95D95BB1F75CB5D773227
-:107BF000CC27E5C278E4C7A49BA3CBDF06D9E885F0
-:107C000077051A86327EF79618D97D989EF200FD88
-:107C1000DAE7DC83D6813C55E96B1161F2C74B6230
-:107C20009CB81FF1777454FD7809BC37C8E52CA4C3
-:107C3000E24023D24DCADD068CCF5BC6DFCB7A8A09
-:107C4000D217A43E4A5F905E9BC1CE33169987E15E
-:107C5000BB6D0D5603CA0BE95393DF0AFAEAFE51D6
-:107C60000EF02348B2B3CD05FE409BD4B48E40BD88
-:107C70000233BC2721C41738800EBEB1CDE977B1DD
-:107C8000383C8A4E01E8C891544C8EE5E2E901DEA9
-:107C90007B911D3713F02BBE90546701B8E5663019
-:107CA000BBABB1A410E148E13B2E2339DC4FEAB471
-:107CB0001BBBDFDB826E5FE8E5FECC940CAE476752
-:107CC0007AC9400DBF370A5C0F53BC2447C3F78BFA
-:107CD000AE9840E05CA927BFF722CF363079F6880E
-:107CE000105D9EA9FAA72ACFE40839A1A68BFB4D07
-:107CF000D4DDEF322639817621F51A288A24EFD592
-:107D00004FDE158F70980D7020693776DBB53FEC2C
-:107D10000F7A6561547A8B946373BAF775570AE0EA
-:107D2000E994ACA44E077A7AA7B77DDD558A74E84A
-:107D3000EBA3C0BEB4FF991FA35FE7C4333605E4CD
-:107D400050D985C7717F28BD300AD3F2C61B703F5A
-:107D5000179E9D5C08F4D0BEEAFABC4FC1CFE3B3D6
-:107D6000E1BEDDDE583408CF237DB10AC477B437D5
-:107D7000D2F2827039C48B8B9A780102DE77CDFD06
-:107D80006F52A0A05EAABE7B46ED3AFB68F00BAD39
-:107D900016F15E58E9B33617E89FBDD15FE9AAE84E
-:107DA000FE00D86BC1EF4A07CC013D7ABF7D742835
-:107DB00040FB9DB38E9D2334185D2703A0373D63A0
-:107DC000C173C88684E8EF82CCCDB87E19C881B96A
-:107DD00019AEE7104F56F64E69EFFCC0C63F098753
-:107DE000CC708EF5227F1F4572DBA7EACED9D83939
-:107DF000D649EE6721E65ECA6378B9D24BB99DC514
-:107E00008B1047F472D5CE880DDB194DB08E9AC613
-:107E1000338B3F4578713B83CFFB94CCE67DEA15ED
-:107E2000937F5114FA3FC5E3532A04065F950F4E22
-:107E300075EB476E7C0F27924E8575435E1845FBA8
-:107E4000FDEA908CFB4635A52FA4AB75A3303E5EB2
-:107E50007866D4D310377CFEB088E595172C58DEB1
-:107E6000F1B0F305887B0ABD2B13904FE70F5D1F20
-:107E7000C7FC447A3FF63D7D985C38C6E543E9850A
-:107E800027907EBBE9C437D708FC577AE12946DF43
-:107E90001B057CB79278ABDF1D3B90D3E768685F2A
-:107EA000317911C07B8C0FCF49CA36989CA00F4402
-:107EB000E2F95886A2F37B94059761BF84EA5F4993
-:107EC0009AF3F4533CCEB8EC027BAF9038BC240D4F
-:107ED000F881CBA7301DEBDFA1EDB044F7D39FE3D2
-:107EE000FA4FE9856B747646787DD7E1F752BEFF8D
-:107EF000970547613EBC9E1746455B4F781D63B0B2
-:107F00007E477CF4F1D3399C4FD6971317956FE5D4
-:107F10004656AFD477BF11E44EE9AAF80441B3AE98
-:107F2000B2C62A5D9C47D9AA12E32C4DBF613C2CF6
-:107F30007E77AC14C643FA4B0B272FB2825E502CCF
-:107F4000F7017E5A5751F85305FA63F2E90BD997B6
-:107F500005F2BABDF13E7BB47B13E97D22F0D3C8B4
-:107F6000F143F5EA020D7E54BC44B63FB9B6ACF01D
-:107F7000A7E08F5EC95E21E95DFE44E02D3B3ADC5F
-:107F80008675C32D07E38D2E0DB7AB7471453DE0AB
-:107F9000C6F1ABC245FD4EF5A8ABFA8C80F108BB2B
-:107FA000BFD3C8F07F297885C7E5F81F1B7D1DD397
-:107FB000BAD7B1807829A3CEB9E43A1E245EF3453E
-:107FC000D6A1E29FBCA2C3FFB497D6221FAAF89EF7
-:107FD000736025D2EF1CCA8F70DEDFEEBBDF1E2D73
-:107FE000BE685A6F781FE825B985FFF7F0FE85EC6B
-:107FF000CD82B832EF720BDA23A7D63D91A585F377
-:10800000DC8CB1F7005EC8FAE4CBDA3FBCE39C87B6
-:10801000C0BEF43E23A33F6D6B86BB0CDA97733B67
-:10802000FC91F80983A2E9078FD61F1A027EBA864F
-:10803000FA364C65AE5F12D02FB3515F72457BDFCD
-:108040006B491F26571EAD6F637E4FB39738B4F749
-:108050008909D39FFE93307F8DDACE28BB1DE03F88
-:10806000350AA418F53EC9BD24BB00FC1E49F95EC3
-:108070000DFC16F761F79196A51D70C0BD6213ED5A
-:108080001FFC39E64CE99CFE9C93E5F3854F45883F
-:108090006F96939A08FA4373E9770DBC8D496D3A50
-:1080A000FF74241C24B31DCF9B24C2F43975FDF446
-:1080B0000BEE4B8FF17D6905F76B3E5FDF847EFF32
-:1080C00045B176DCFF16F733307BCA2CE17B35A651
-:1080D0007856DF18C7E66D01BFB708FB6A00F336B4
-:1080E00078D147C4A7D104C8C71345807C22092C86
-:1080F000C67752C6067F02DF9D696E3FE0F19BF4B2
-:10810000B62302F8B18BDD8361FF6D14BDF90AADB2
-:10811000FF7331940FF5B268D127092CED07F1D028
-:108120006ECDB9167B2754D1FA0523F3FD164811FD
-:10813000E73D7F19AC2D5F9EE67A1DE6D16061EFC9
-:108140000C251D17F03CA7C1C2DE1B6AB0DD1E075F
-:10815000FBF86FFA30BD1DE900E8E810D367CE499F
-:108160004A5C02F3932A6FEAFCFC66E54DCD3812B7
-:10817000B7F7D653BA9434E72A03259701E8E60AFD
-:108180001FFDAE9D67147F5C82159FE58D7A9EA3CF
-:10819000CE0FE2F6018EE2850968AF45D2C39E6E2E
-:1081A0003FB357047C4E57DF2F961E61F978A2FE2D
-:1081B000A1FDF569B73EFA08CBF3734ECF2C768E4E
-:1081C000D9501287F171EA3CA6B73ED6067AEAF496
-:1081D000D6F4D970BE35DD3AE87348F7C8A103B1CB
-:1081E000A007DE2FE0BD923B7FF7A61C4BD3ED1F0F
-:1081F000AEC3FBCC9F73793A8384F05D783771F01E
-:1082000073763F7E9F459C3CDF24835D7F77C07FF4
-:10821000DB649ABBE74DFF6450DB661C0ABD056258
-:10822000C0DDE4988067086ABB16E7DB2CCFDA75FF
-:10823000AF5F32E37AC2EB35E3FAD5F5D19922FC90
-:10824000BBE1C3DF6B52E121CEA2EBA6F4323DEEDF
-:10825000F61BC945F4F2E9D69CCFD9A1099B4F245E
-:108260007CCE4311D51F3BFAB84826C5DF1FFAB8AC
-:108270000448ABCDA12CA93FF2890CF95AD1DD0FEE
-:10828000429FBFECEB1E9C0C70684BBC2CF979C470
-:10829000C2F8FF08D033C4795D48C275A9EFD01F7A
-:1082A0007CA0DD067AE7E2ED1FE33BCB3562F0C947
-:1082B0003BD01F2AA2DD74AE79F045EF9F1D013F30
-:1082C00015DDFFFA66AAF72CD93A674A8C4F663655
-:1082D000C7623CFECC05A2EE1DE9990B583C1F91EC
-:1082E000DAF26ED5E9EB8FF4DA0FF80B22FB99BDC9
-:1082F000A0881C1F0EE7B48EB1E83F58C3E86BF6A8
-:10830000789708F1CEA3970878DE3AEA84D212A4CF
-:10831000F9D9FE7827B0E7EC07FE6300BC7350DBA9
-:10832000C6FC81A9E2BDF90F839FE500DBC7217F71
-:108330002FD089D5A55835E7051D725D3EBCF7E7FE
-:10834000BDC7EA02FE2FB9D5F529BE17C1FD15EA52
-:10835000BEBAB3B104E3644BEE564602FE4B9A2C10
-:108360002E4CCD448AA172AC44226648538D44B24F
-:10837000401A43CC90162E62EF7697364E45FDC0DC
-:108380003EB2D808EFF196B4FEE26B685F2605F6C0
-:108390000B7961F894B4BEF31DE075AEAB18E31928
-:1083A000AFDA68D4D981439BF4F9AB5BF4F9FC8074
-:1083B0003E3FFC903EBF2193201DCD32DF920BF05B
-:1083C0003AB0D744F72288FF3361BCCB3181E1C793
-:1083D000BBC982F2B0A8AAB510ECE033AFD90C60EB
-:1083E00047EFF9EBAFF03C3CB42596409CD5FEDF5F
-:1083F000C7901888577CDDB20ECAAB28EEC07F59F3
-:10840000F5BA652DD8E13BAE54ED787F1EAC67C759
-:10841000DF587C4D6893C90FE7E36776FDE2353896
-:108420004F3BB3A90FEA57C704AF2106C6FF82F935
-:108430003F83FCBDB8207F2FAE6AA3DE2E9E97C976
-:10844000E44C70D13571D1F42635CD494BCC1D4F5C
-:10845000E7D6F5B86926F8810637EAE1A2D61BE22D
-:10846000D77F7F90F73F9A18C3749A0D7102FE066A
-:108470003BECBF2F477F277911E79F575FED6E27B2
-:10848000F277E288A2B9371596DF647E1F88DF0095
-:10849000F8F70F7FAF229AF968F49389BCFFAFCC4D
-:1084A0002C9E3989BFDF7FBAFE10EEFBDD7A5FBDFF
-:1084B000CB355E932F6DDC9F5202F6D3AAFD29B314
-:1084C00034F0AADE7430E52E8C7B92C0834BAAA7D1
-:1084D000BFF214F82BAA37894D304F2807B87534EE
-:1084E000BD65877A541F1E067E90B03E7ABD6BBC78
-:1084F000868FFF5EBA55F9AD9AEB2F3B47B64D809C
-:1085000038F5AA46C109D5AA9A6EBB6532C07B155B
-:10851000BBE75A28916291F257F5D6DB7E3C14E214
-:1085200066568F70C27C6817B7C2F7AACD67F13E56
-:10853000C3D288DF3D50D3DD994C2FA4F503065AF2
-:108540007FE9EDD672905FB4DF37217F20671DBED3
-:10855000AF623FC5CE1FE8F74F0C546F3935CEFBE5
-:10856000DE5DB4E919D2F4D164F02B35EAE991D299
-:10857000B7007A596883E05C875F1715DE0C2AB76D
-:108580006B21C6FBD2F299D1EE5B57F8F5FD44E2C0
-:10859000FD233E5FFA97A3A59FC87A8993BC184F25
-:1085A0005EBD80CA438D9FA0FA840FDF978C1C8725
-:1085B00068E99AE913440179B8C5A2BE7F24980BF3
-:1085C000799CEE0096C77715814E29A1545D49C666
-:1085D0002B00EF9BC9444847835C81F7F44736E59D
-:1085E00041FDDD42F09597B03F1BCAF10E4700DF19
-:1085F00099CCE0F74C3B1496EFE27E4EB5BCB2D579
-:1086000082713667BE34A29C5DD87410E3E83B5E8D
-:10861000B3180C541E9CD99A380EE2313B9AD83BC1
-:10862000C5A79B12C7192FB26F47CA0D753F3D0AE8
-:10863000FFA4FBEE9F335DDF64C23EF5088B574D10
-:108640004DACCB8FF6FB176ABB24635D3ED831A1DE
-:108650007BACCE7508276FB6847EF03427C40995AD
-:1086600008AC5F63BF62B12FAD6FA375C11F9D7072
-:1086700048C4DF6B382E3A7FE21880EFC9A31E345E
-:10868000A7C08DEF539247585CE56C8904244A6F6C
-:10869000B3613FCAC33CCAE5D9AB048C2B9BB34C36
-:1086A000BF1E782757BB8F56103F7BDF42EB47EC4E
-:1086B0000FF12E74BF81772DCD2CFEA272BDBE5D51
-:1086C0001509E07CAA377F6F8A06AFAF89BA2E57AB
-:1086D00026AC4BB8D98CF3BAEFB93876DE63242ECA
-:1086E000D84F43CFD950BE571137F67727DFD73D44
-:1086F0000F94B8E6801C5E30DB352711EEDBB2FD4F
-:108700000F4D3EE46F01F79DAAF124D097BDBB4108
-:10871000605FAD6A150243216F265EFB30F61DDEF9
-:108720001F80756BEFD794131F8E57BE4AFF9D7C39
-:10873000C8F05ACDEF3192F59AF2FEA09F317854ED
-:108740006F36E9FC3AA3370B5E1BDE77F537A4D012
-:10875000F9D59EA2B282409CEAF7265DFF10CF3386
-:1087600002F77D62A1787BAE5BAEFB87448BF33F63
-:10877000C2E1F8DC6DA5E9C0AF4F83DE9AC1013DCF
-:1087800012E516F71F9080998E1333BC3B8FE58559
-:108790008B587ECAEA57A6348EA1769EECC673A18A
-:1087A000D962F1DB701FECE57EEE9BFBD271661B9C
-:1087B0005C5912F2AD6B10FA43173038BC30AC6E16
-:1087C000485D143D50C5F3F3425300CE65BDBB98E0
-:1087D000FE652B08C9DAFDB5BA2F93477107827879
-:1087E0006F22B45DC07B962B85A3781F71E50D0ABF
-:1087F00001FB3E8DE209E4F14A813C2250B8143479
-:108800004FBDF72DC073418C137EEEA2A679AC58F4
-:1088100063C5F5333D2DB66E2D9CE7A4CECC19066D
-:10882000744ED73DF366FAFDDEBE0A8E976E65780C
-:108830004F5BE4CD86DF818A3B507CEF5BC0874392
-:1088400063F09E6C2A85952D01D325A07FA5918587
-:1088500002D47BCECEFA4F368833A7427E18CB2780
-:108860003C24B8D621F12DC7FE534D6422CC13BE53
-:10887000831E6906BF0296FB197E8BEAF2A1BFD464
-:10888000012C4D320632A19FC3DDF876A35D319FE6
-:10889000EF63F3B78E4D053BEF700735B8A9DC3AAF
-:1088A0009CA6EA43012BFE3ED4C01C569FDB85F3F9
-:1088B000F3D97D83A42C7DBD2ED915371CE4E807A0
-:1088C0004C8F3F6F75A17FFA1A63747FD64B7D99E9
-:1088D000DEE2B92010BF661FF04CFB06F54ACF055B
-:1088E00049F7BDA3DEAC8B73AE2E3F80F7EE6B482D
-:1088F0001BC661D734C5EAE276AF89893EAE4ADF4E
-:108900009E0B22F1461DD7A8FF7E21917813A3D597
-:108910004BD17FA7EBD0E55BBEED5E077C272383C1
-:1089200076B0072771BDB6CB6FF0CA5787F1D2E991
-:1089300008EAF69D4E85E5BBF8799C5AAEF6DF391C
-:10894000CDC8EF15B17795013EDEC184BCD87A164B
-:10895000FDD1D5ADFB27B0DFF76274A18593572316
-:108960003F521ADA0206CADBFFDEF7D453B94328B6
-:10897000891D50F9F8F4532ECAB729A241C7D7B1BF
-:1089800005DD7C8EE2E53983C8E5C299A7C68FD1A3
-:10899000E659FD70FB8E29E3A96E5F90CBDAFFB13B
-:1089A000EF97EF2D1A18964B741D59C5364DDE1CE6
-:1089B00091B7D2FC504DDE11519E14519E1691CFAD
-:1089C00064F53B6C812CD149487BDFB353A45170D3
-:1089D0008E1D98012F0A2C6BF86ACA789AAF296805
-:1089E000C3F899DA56C189C7FA6A7CBC93E959562B
-:1089F00067107FCF2EB6A0ED6D9003D52D8243A0DA
-:108A0000F46E6DDA8A7135D5D04ED1B46B6276676B
-:108A100075D3516CD76BFF3906E4E7A539C7B09E13
-:108A20007A7E7407E9FEBD8E0B202F6B9ADAD93E51
-:108A30001C717ED499EE3A88F230E2FEAB07FAB5AB
-:108A400086E95EADFF87A1ADBF836E62E79F5D28BB
-:108A5000D1FA7FAA691F01FA12BC710972FF79C1AC
-:108A60003F04F6E717897B08EC47F7D45CB1DF4099
-:108A7000EB1D9183ABE1A9864159969B242AA78FD0
-:108A8000D8827D052A4B72D624DE04F03C921CC4A9
-:108A9000171A7EB6268995F70DF68573D7DCAC1FBD
-:108AA000B2FC15C1D590BF75CD952C3F34D857A4D5
-:108AB000EDFB7BAFBA09E0BFC1119D6FFB66317959
-:108AC000AECEAF2CDF959605FA6635DB2FE0FAA522
-:108AD00099CAC51995A7B76CA07098F1D358945747
-:108AE0001B3A6EB9B118D7EF2D863837F6C43BDF85
-:108AF000CF502E4BA807A4C31E9610C6872DAB4D92
-:108B000041797F65DD56D8F75367E4A2BC3F9FE902
-:108B1000AACF1A114EBF1DC0D2FA2C76DF235534CE
-:108B200060BC41EA8336D4839EE6E749946F10BF68
-:108B3000568E8F61594CFE0DCB62765246DFEBEBC1
-:108B4000613D7772FD74C5E3FE4D160AFFDF0391A8
-:108B500024A17F1BF5DDBBD652B91107F114AE7409
-:108B600090077781FF37379C57F5F715F9346F0D6C
-:108B7000DB692BA6BAD2B571402BD6B27255DEACEA
-:108B8000C866EDD57D27B581C127F5E921EB601DCC
-:108B9000B112C1FB1773A70D5AB710F7EF9B71BE47
-:108BA000C4E54A07FBFB44457F03E8952A7E1ECBBC
-:108BB000774DC2F5882C5E5DC5933A7E3D5FF76CBC
-:108BC00091EEFF749D0FF673231CA93E90C7820B94
-:108BD000983E500F8ED8E4307C89141C01DFFF17BB
-:108BE000C1E95E58F73F0AA728F2E267306ECD026E
-:108BF0002A2F0C1A79C1E1F7BC1090530B34EF9770
-:108C0000D0EF6007DED1D7FD6896E61C67C68335D6
-:108C1000A8FFA9F38AFDB79D13EF203DF92C523F21
-:108C20003BF27BF332F4031A9B502E1EB991381796
-:108C300082FCE0E7B2AA7E59F8D3AAC360479DCB75
-:108C400012B19D45C5AB50BCB594C2E971BAADC275
-:108C50007D74EF5416DFA3EE9B2BF8BBBB2B1EB825
-:108C60000AE3FCBA48107F97CD3B92A0FCEB2E9F05
-:108C70003E08CB29BEBD16E0F78A18FCDD8115F948
-:108C800004EFD9AC987E2596EF51FD4AD3CD38CE6E
-:108C90008AA98C9E5654B0384CD847006EBDD1433B
-:108CA0004A03F36F10C995A78D077897E32FB62075
-:108CB000B8FD63D02B975950AF84BD13CF477CA923
-:108CC000381EC5EBF62CA46F368FD9CFA6FB97E2E2
-:108CD000B84EB4CF1FB3B94A505E3D1CABC0FC5771
-:108CE00059C812F3303047C82328F7F87C88EF05BD
-:108CF0008CF398C9F5B5CFCACFD9401F7893CB1B59
-:108D00002018B0976711563EEBA1D8A360DFCC7A4C
-:108D100048C4FB8564C9F52EFD79079D6B0AF8C729
-:108D2000F95F63C8067070433B3BF4FF9F3678CF12
-:108D3000C4FD10BBDF4BBCB4BD261EFA63E05FF080
-:108D4000B38B6CFEA43E5689F62EE8C75CBED3F901
-:108D5000BBB4E3A9E344F64BEDBB4F005E14EE0158
-:108D6000B807167A58E4BFD7AA9F6F9231F4A4854A
-:108D700096CFA817E3175178BA17D870BDEA7C6769
-:108D8000A686AE65BF0BABEFFF646C6D21F8C355D3
-:108D90007B843CA4B7C7C02FD19D17314E1AED9AE2
-:108DA0001EDFB93D1B690712F23793B65EF73D0D22
-:108DB0004588983FA72B4590006F6E1EBFD08DEF62
-:108DC0008879ABF034F48B0ECF2463B02FC82DF725
-:108DD0000213C221B2BDBAFFBD60215EB0131B05F4
-:108DE00001E9B1F18158DCCF8899E1D15319A30091
-:108DF0007DBE680C611C937737FBFDCF2E4B680757
-:108E0000CAA581CC9FD0F59EB816EA752633BAEE76
-:108E1000DC25737E22EC1D89F7C475582EB07E3B8D
-:108E200017C6627C14DCFF34C2BD4CEF9FEBC1BFA0
-:108E3000A2DAF1C777B0F714E0777BB47630DC9B29
-:108E40002D1F16960FF83E0CF0734B2CF713B92B11
-:108E500070BCBB6208C461D41A048CEBADADBC120B
-:108E6000EF9110FE8E73359F5AAD81DA83C3C27CB9
-:108E70005E6B383608ECA96AF3327CDF9996BF093D
-:108E80007618FCCC6EF7EF7864F7A4EBDA6567FE32
-:108E90008AF7DA9BF5F8AF0ED309DE8FABD4D24D4B
-:108EA00076981E50DF0639319EE0BD7C1BCFC74E41
-:108EB0006CF3839FC6C3FD16C907D8BBB5B682261F
-:108EC000027E53CF29A66F8C6E5D7B10ECDFF88994
-:108ED0006D6071D1FACCEF16797F6854EB7211ECAA
-:108EE0003A554FD1D895436E1EAA4DD97D5BB053EC
-:108EF00061BC207C02FE90D8FEF63CDFDFE83E88B5
-:108F0000F278AE6F30EE83B04F811C53ED5C906B06
-:108F100020475EEE376E5A3FBACE3C65DC2DFDD859
-:108F200039CC10D4EBBD9777DEA4D6037BF7E2FEF5
-:108F30003006B7D0CA382627E00740C14FFC5B791E
-:108F40002DBEEB0D8297CE77DEEA6C94BBAA9FA66E
-:108F50009AFBA94AB95FA794FB75C0AFAA8D7B05A0
-:108F6000BFA5365FCDF9BE067E4F0ADF0B3085E325
-:108F70005EC19F339E046C500E7E1D3BBB5FA76D90
-:108F8000EF21FE2209E9FC7B93EE5DAC156CBD334D
-:108F900039DE575A983F67F4436B45E6A462EB8D80
-:108FA0001BE6CA7EB420FC3ED7E71C4F2A5C8CFD32
-:108FB000C6DD03708F11D9FBE6A147D9EF5D9FA0F5
-:108FC000FBF356EEEFB8D98AF78B5D03212E417281
-:108FD00064DD1CE5775B97EEB6E03BFDCBFAB1F3C1
-:108FE00060F5FBB87EECFE2EFA8100EE0B6351CFEC
-:108FF000A660CE033A2AECAFEE97240FFC4F4779D8
-:109000007C67EDED5637F417E47EF195FDD8BEB5DB
-:10901000B21F7BEF5FCD77DB759C5ED4732CF0C7FE
-:1090200068FDD7FEEEFACC7FA2EEAFCF57C4A05CAE
-:109030000AD3AD01EF4FC6E6161BC18FB49BCB918F
-:10904000126EAFEF86035A90274DDCEF2C3966C0C5
-:10905000EF02ED3E958BF1924946265F76DF19438C
-:10906000207EEFD0E9579F788F969F3B65C4F7F03D
-:10907000E6707FEB6E78F71DE4E57613FA11AB8DA1
-:109080004C5FACDE3794E92946F74A88EBF66E93DD
-:10909000D1AF556DF76F7A05CBD39D14B3701F9484
-:1090A000E9B9BB6259FB18FF2F5F03BB735FAAD3FB
-:1090B0004BEB2F4873EF03BC66989438A29EAB0A23
-:1090C000E1FBA2C7FC4C2F3E068207C669B5F1DF63
-:1090D0009173A5CFA5FD1C7F3C15D743E52DEA4F25
-:1090E000C79F32E1B9D9F3DDE332FFE731B918DFC9
-:1090F0008B39B63DDF492D4BD2556C0C807FDBF3AD
-:1091000034D3E7661B9435001FB22FD6A9B3479F0F
-:109110002A63EF47543E34E562E7D820DFB5FEDD31
-:109120004E12CA427BB4BC7F13C49376B60E71B2A2
-:10913000E3AA343C24A9E5E7CB276406DFD05E1917
-:10914000E9F972FB07BAE8FE9D3B91E0EFB769CF02
-:10915000D322CF217AE6191E3DBB53B9DEA62FBF1D
-:1091600025D31D02F956FBCCB7471628305E08E51B
-:1091700021F1317FFA09D93503E8367E7C4017A703
-:109180006556185FCD36F1FD9E048C5A3E54CB0BCC
-:10919000C791A8E7362685E901367EEE1C59FE7F89
-:1091A00000F2988AEC008000000000001F8B08008D
-:1091B00000000000000BC57D0B7854D5B5F03E7360
-:1091C000CEBC92996426992493F7C93BE4014308E5
-:1091D000112DEA24040C98D209A062B538BC41C90B
-:1091E00043B0BDB1C566201102A2861A1128E084E1
-:1091F0008762D5367801A346EF8048B1D5FBC747D3
-:109200005BB4F7F78B4A29528188964BEFB5F55F2F
-:109210006BED7D92394322D8DBDB3F7CB0D967BF51
-:10922000D65E6BEDB5D65E7BED1DB36A602C81C159
-:10923000CF4C334B64EC1AC67F324F316FD0C69897
-:109240004555A9FC9A5321D37CC867AE0C99168961
-:10925000D40FE909230B59CA21DD620FEECCC29667
-:109260005E86FD2C9A00FF85A68B64D66629C3EF27
-:109270006A4FBF8BB193079C9EF5F09D7DF995CC0D
-:109280002A189BCB443D336BB7C431F67C9B14B298
-:1092900040BDB99BCD3BADD05FC56AAF6C87FCC00C
-:1092A00076C9B313EACD6DABCCDF02F93BF7977A01
-:1092B00064681A83E3603EE80CCA50FF9AE649EC02
-:1092C000E3718CCD37074D0A7C674F4B6C0FA3FEC3
-:1092D000DBB0FF65D02819E0F90A7FAE1F4A176F8F
-:1092E00036C364F9DCBFC27F8261F96CE8B7BB4B5F
-:1092F00066305FB617BE170E7D5FA6840E49318CAF
-:10930000D57747B4677F330FD643405980F0E832B2
-:10931000B13B7C369A74525D29637FC0FF26336669
-:10932000CAF48D53C763263769861DE65DC5E735E8
-:10933000B04F22BCD6B32613C37E3AE319BB3A6CB6
-:109340005C0B0B45437A520E50F922F3464A6BD41C
-:109350002C1AEF4ED66F6239D8EF80C907E3D9FBDC
-:1093600080AE2597CEBF06F960FCC87C3055F0C1B1
-:10937000B2532C742D8CB76C250BD58FE6A91DD25A
-:10938000450A0BC4005E17010E62451A55C6F1AAC4
-:10939000160EE16569509F477CAA6178463C869726
-:1093A00037F67C650ECF279918B3C60DD11908453D
-:1093B00070274D6A1ADB04705EB3322833985F4A17
-:1093C000BA77522EC01B5DCEE7DB78DC6251C760F6
-:1093D000DEC7B2A1DE176995CFE54179A3C2BCDD36
-:1093E000501E0D78E982EFDBAD2C80FD3F9EA75229
-:1093F000BF6E13E75FA3E263636D4897BE9001E918
-:1094000092C01CC88F1A3EB7DBA15D19B693A8DDC8
-:10941000607B0B6B8B0A6B5FF5A29531582F175E43
-:10942000B007CD509529FE4C27F497F87B335B0F9E
-:10943000F9B32FDA97607F678D6C7637D477C9AC34
-:10944000A99BF8650DE1FF8748D7F1C84D55A90CD8
-:10945000795F9A96CADC58BE9ABED73B81BF86A177
-:10946000EF607956DFCD9CAFCCEA4E18EF82B3FFA8
-:10947000079807785800F2CB550E77E3FE49637FD3
-:1094800004DF1B7D360FC7BE7F2CF2AB59BEE766EB
-:109490000BF0D71479E5C0BD308FFA749BC30C4D27
-:1094A000AA33FFE3B7B742FE93FD4666463AEF990B
-:1094B000349B655F0A87962E0D1A3FEA0F5B2F7764
-:1094C000EDD5E7EBBBF5F946A67CD4AFF101A06082
-:1094D0008B6A779D8C26D9E1F90AF8DB6C6E3AD558
-:1094E00005F09A5F327B56C1E706D5BF03D7538399
-:1094F00061E028E2D99CF9E9683FE0A52AF3CBA313
-:10950000A988FFFB9807E1BE60AD9C4BF4D862557B
-:109510000361F2AB51F07F67462D95776E35AB1244
-:109520002FAF1D0F726B092D61AA623100FE1B3730
-:109530004FFD441A4DE516A44727F029B57B4E0A86
-:10954000AE82764B362FAE65507E86054D1680E78F
-:109550000F623D35CABD532CF0DFCEB89A51285F5B
-:1095600094BF2A3EA4FF5AECEAEA217CBD34B83EFF
-:109570002D1D27002F373289C5E2BC9DFE97709EB6
-:10958000F5967E5325F473FD5FBF20B9BCB8F9D5BD
-:109590009C13E350DE78E712BD617E284716DF7B1F
-:1095A00088BE4B332C04DFC9745BD00CDF5FDD62F7
-:1095B000E679A789F227B74B945FDC2D052D595822
-:1095C000FF627C25CAEFED4687995D8AA748BCFCFF
-:1095D00071DBEF621880FC47102DB8BE98A329C636
-:1095E00067C7B2A69819A588AF1B3E41F9B578BBED
-:1095F000EC09A19C7ED9EEC963989F3C6AA10DDB62
-:109600007F1E5F89F8DB31D921D377D9877288290A
-:10961000DEBEEBE1BBB2E32A15D7CB91ED1CEEC564
-:109620004ECB1348E7EBFF2A13FF2B06E6DF674319
-:109630003A7847E1BA53B7ED9982F8FD635D8A81C4
-:10964000EA3F2B3107E2C3D99C88DF174B8A0FD73B
-:10965000D992CD4B6B59CC10DED7A832E1BD327315
-:109660006562BF8DF8FE66D477F5DB81CF71FC199A
-:10967000EFFFF656D710DF4B33364FBF06FB7FD2D6
-:1096800048FCA5F5D3B8EDDB823F180B019E160B05
-:109690003C993357E6E3F8975B0F8B5737E53B6C04
-:1096A000975F1783EB7D1BAC8F62C6FEAA4AEC2B3B
-:1096B000A0034B8B233D33D27AD4F493ADD0C0F5C5
-:1096C000BE8779F7409A64665E09E457769642E56C
-:1096D000D95926C287F297E57BDF04F89F53FDD165
-:1096E0005990CF64DEB1A867D40147552CF4664386
-:1096F00006294738CCC13D24E7200F78DA94C09E74
-:10970000581F066786E80FD6AB0BFB39FBDE974781
-:10971000118F0D199F8E46BDDD78F10B930AF4B4BD
-:10972000F54A24676D1E1F43FE68ECAD630B4A8645
-:10973000E463A387CBEF4BE44C9691CB33D700F592
-:1097400033359BCBB74E275F9F5B9BA38228F7B631
-:10975000BA8256043ABA3CC050BE4F2F973D08B665
-:1097600066A7F82C9C5E16EFAB4C467EF5C81E141F
-:10977000F17DDE8FDBE221FF66F9648F0C799B7748
-:10978000577B36CEDB6314E539019CF71B132BC9DD
-:109790005E99EE95695CB6242688AAA2CFFB8E6BF3
-:1097A000018CFB1DE67DE404D0B1069437D2B10FE5
-:1097B000C7067A9D71F827205EB4F97CDB33F591FA
-:1097C00013E1768697DB03F089EBB1F2E1F1305AD1
-:1097D000ADBC0EFBB9FE3A4E87D3CF9A83AB61FC8A
-:1097E000D356D03361FAE2B49DEB1D5F9624ECC2F0
-:1097F000EE0C94FB8379659401D7FD3D0E8E0F9797
-:10980000A93B03D7DB9F247D3F77B6CB2C0872663C
-:1098100069BBC48200E2E9A79ECF40F9FBC99EE77D
-:1098200033E685C117D94E4BBFAB8DD7F198D70220
-:10983000E3CD63DA78A1341C6F9EC7FC21CA0FD632
-:109840003ED9DB1F663F90840CABCF367B497E9FB1
-:1098500083D5887CA7B53BB724CA8B76E6396609E1
-:109860004A30D4BC5E3964C6FEBCDE5C17D0BB4156
-:109870006B1FD17FA7E01FA9470AD9A17E74C90039
-:10988000C9DBA516DFD154285A8A7484FA53918E05
-:1098900012F2ABD784F356242ECFCF387C7767C132
-:1098A000BC1676E8E9989EE5E0F375B8B83DD86057
-:1098B00053505F24B6326E077EDF10447DED8A8AF6
-:1098C00019CDC08E31A5B86D28A7AECF8F6A33C42D
-:1098D000E2F78C20D64F4F29A476812ACEDF81442F
-:1098E000166C95B0CB2689EC40473F53E07BDA04F9
-:1098F000E6580FD9DE2C6E27BA9967B34C7662B75B
-:109900008476A286074DBE23DFA0DC3B2D59886FED
-:10991000A45E89EC3ED9D03D07FB1D898FB644F08B
-:10992000D1967F321FED1A918FFC2AF191DB323CE8
-:109930001F81DCFC46F559C0A700BE9204BE1E166E
-:10994000F265E0FB16A21BFC4838DF5AD15FADC5BB
-:10995000169247939CF874507E433FDBC0FEC47D53
-:109960004A32DACF90A6B6CE55B9FDDED72F417F69
-:10997000D1575948EF3D60E8CB423B3FA9A8691F4A
-:10998000F247D29C92B256B24FD29C28F751D6E001
-:10999000FC1B9A27F9B81D00FD221FD599683FD1FD
-:1099A000706FA58FDB0135B43E1A375855D46793D5
-:1099B0007AB356217F34AE04FB08E56F4FD7964546
-:1099C000906F9865F3A09D62B5CC2CC176AC5DBF5D
-:1099D000CED649DD641707A6320FCAED734143C0E6
-:1099E0003806E56CFF8E1FA11E5F5AE209A8B8DE9B
-:1099F000045FE632D20B9D4E6F721CE0F5E0DF642F
-:109A0000DA17758E853CA42F097A76D679939D90C6
-:109A10009FB7C14A78EFECE2E5E7EC8020E83F45EC
-:109A2000E6FDB1580BD73397CA030BE23D7102D361
-:109A30007E36633E45CB773C46768CB6DE3BB3380C
-:109A40003CF6125F165ABEB7ABE3FAA260BD27CA56
-:109A5000066D531440BB3B1AC7E4792F0EF7A801DB
-:109A60000049C1EC7F6FAC9E189EE7F587DA3F3066
-:109A7000A33A8DF4EB6039820D7A57CB7BAD00C7EA
-:109A80005AFB50B902F6A4A54712ED27CC980CAAB0
-:109A9000F89C24C60F281BBD808F87AD4C375E38DD
-:109AA0007C4A44FF46E8DFA68AFA8152DFE45C8004
-:109AB000B74C6BBFAAC30BF03D6CD4F7472815ED2C
-:109AC00031A38DF7EBDCD7376E481BD2FF600FD880
-:109AD000B3C70FD9016BDFAFED180363453B3E37CA
-:109AE000A17ED5F479A34B223B2372BD2665F3F505
-:109AF0000A766D5236C90D6EEFD6A2BD2B939D3BF3
-:109B0000059756E34A1F43FB12EC86D46CB21B3E0A
-:109B10003D7908BE77CE384D767EE34585EC8F469D
-:109B2000B03FD06EB7F4727B96F51849EF6A74BFF8
-:109B300053C89F4E27E87DE4D397A5F1C8A78C357D
-:109B400065DC043468C9F6E6211CDA7E2C12DEEBF3
-:109B5000B2B95DDE5858B5251FFBDF2D31D4FBEBC4
-:109B60000B3F4A44FBA4B1F7C3C48561ED96F63CB4
-:109B70004A7858BAD738ECFCAFCB9669FE0D2F1C4B
-:109B8000F0E27A3F1D94682D2F5182EBD0AE5CB28B
-:109B9000C480961A2B0FCEBD15D73D9B6D627930D0
-:109BA000BF5CD44BB89FD83B33700DEEDBE0AF0405
-:109BB0009FB6FA16D1FADE3ADB62635908E7BCBBFE
-:109BC000090F8E282FE2617D6155328ED35037C543
-:109BD00081FE9346B0B3B0BCE1DEEF923F45836BAC
-:109BE0007D8FB106EDAF0AB0B7FE15E04E8F9B56E4
-:109BF000E381F5982AEF1BBB02F29B4690BFBFC9D9
-:109C0000E1F46C937C81EFE0BA7F41627BD4A1F2F6
-:109C1000CC1E6ED7DD9CCDED40EDFBCDD9DCDE9CBE
-:109C200018E89B84BCF78AD21F8DF66F23F37E86DB
-:109C3000FB4EE6B3A97B884E5CEEB85A54F22B5922
-:109C40005CFD0F8CC1F2890AED2798D2FF088E7B4C
-:109C5000769DCBB39E09FEC5FCBD2541DA3F64FB72
-:109C6000E7237D2B841D79F6851BC6CE2B19B29375
-:109C7000D6755983AB010FEBECEA4F6A50BEFD4538
-:109C800021F9C62C037D93901EFF1547FDAEB30648
-:109C9000D721FD031B8D54BE2FC5DF807C79AAAE72
-:109CA000261FF7C1CC16C8AF037E32BA3A18DA0BBA
-:109CB000B07D203F83C5E5632AE42705E62A12CA62
-:109CC000F908FB6312FA7968DF0083C3F72A21B62B
-:109CD000F2800B4E5A6809B47D153F648F1CFB72ED
-:109CE00096821F353BC560F12FC5A6D5B3A3988CCE
-:109CF0007CBF66E0A801E613EDEA233BB6BE5BA29B
-:109D000071EA0B9F33A1DFE4AE6EBE2E1BC53E0091
-:109D1000F09781F6C0DAEC68A1C7DB38BFB33EDA52
-:109D200047B367383D19837AF6F0FDC42AAAA7F530
-:109D3000675ACDFD5EF5C21F037290CA7F922D89CE
-:109D40007DED6A9176F0548CBB49EAF3CA88D7B1AD
-:109D500092279C6FB4F429212F620F0F4CC1F53B61
-:109D600000FC857E992D52DDDDAFC1FCB68C2FF253
-:109D7000A009E5067692CBF03BB022E0BDBCE7B38C
-:109D800029C8376070D37A6DE8A994EB6DA4B769E0
-:109D9000FF9814DDD485E5497714925E8D1AC7EEDD
-:109DA0009801DF7F2EF09A6CE37E2EF7EA40D6F220
-:109DB000121CDF77F76B387E6914F929938036F629
-:109DC000384ADBD12FE466AB24ACF7680CEF3FC117
-:109DD00020DF5157427297F2711EC9BB13D29E6C9D
-:109DE00027F76799590DC289DF693F069C81FB59A6
-:109DF000F473613F49393C3D9B1C5250406C65FDFA
-:109E00003BF6207FF6981D88A7DA9E5F1E477D5996
-:109E10006B61DD32DA2B1176C6CAF49987903FCF99
-:109E20009D39B9E37EF8F6E84D073D7EA28BDE7ED4
-:109E300088DC2FECC42AC923DB7BBFCBD6DB7B833A
-:109E4000F97FB8BDC7EDFAC09E68754F983C6F1496
-:109E5000FBB4734BCEC7A09EF97890BF404F570C10
-:109E6000D92BF376477F88EB6AD0EE8FB01B8E3DFF
-:109E7000111D40FA9FEFB6929F4E41BB07E0396338
-:109E80001FF80122C765F27925DC3FEC337A56438F
-:109E90007F8D779EFEB901D69DD205764F2CDAFBD9
-:109EA0006A2CC9D9D765B607ED32C5EB40BF870626
-:109EB000BFE29CE2F696A05CE4F35F660AE5931DC0
-:109EC00064624B281F13CA47BBE725A1779645411B
-:109ED0001EBE37BBFD7F41BAA598B9BCC276F8BD9E
-:109EE0004BD85B5D801207E2E538ECBBB384FEC65D
-:109EF000FDCF83E9C1F5E4C7B1103D3F7EC5BC137A
-:109F0000FD3C1F171A4226EE97203F96DAAEB0644A
-:109F1000A8AF1EB70655EEEFB21840FFCF7FF8AEE0
-:109F200037705F31FF15EEC79A7FE7CAE9B8FFF8CF
-:109F300078C61413CA9B85CC4F7EE7C58CFBA197CE
-:109F4000B220F757338701C7BB0BC4C6561435017F
-:109F5000C0FE55F05932486857A86D9027A3D9DB49
-:109F60005103E3CE6B33D0BE647EBBDE9F7E61FDCA
-:109F7000DD35A8C7D7B619B8FDD82E911E9FCFBC26
-:109F80006EB43B34BC16E4C473FF689BC18BE35CC6
-:109F90009F6322FE031205697E226D330A3FBC8057
-:109FA000631533843035483C5DEB506A86D3CF5A15
-:109FB0007F6DC6260BFAC306D20DE407BE60F2CE53
-:109FC000263F6A5C3E433F629BBDA9BD8697D39AFC
-:109FD000B9601DF051F9B50A37F8981A87F2323D89
-:109FE00087DB0F91F35DD8A1CF479E4F2C0DEAF38D
-:109FF000F399BF203907FD46FAEFE9395C5E5D58F9
-:10A000009F25CE013C740ED06654DFCE4279B54E0A
-:10A010002179B92A8DE3CB90CED36C67F56CE25FE2
-:10A0200027D817042F873FFB5A97847AB3CDC9F9F5
-:10A03000F27F0A7724BC37E4E413BC6D68E4C1788E
-:10A040006DEBA420C71787FB4AFD174B72F47268AB
-:10A0500030FF8FDF77727E5C278BF5E6203934CFB7
-:10A06000C1E7F4B1E4792284DF6D601F00DCF3D72F
-:10A07000C96568A74C9A69A37934BC62257F6BFDDA
-:10A08000CAFE0CB267ABFAF39B86C12B42AB68F2F7
-:10A090000BEACD73C13E01D76DBBFE9C0A342D0B7C
-:10A0A0003F779A99E6BD2F2701F7231FEFFB25D2B3
-:10A0B0007B9F95F413FCEF9019E5D70B596437E5B6
-:10A0C000A7F9EFCF41BD1E15DAF16416DA29DC4E8F
-:10A0D000AAEF3577A11D38AF2DECDC0BFFD9A03FDF
-:10A0E0000763ED71E4DF609DFAEF4BB645B4BBE466
-:10A0F0005C8CEBFB4D26FF28B4EFAEBFCE9B8C7281
-:10A10000F5CC520343FACE973D8B508E9CB1EAEDCD
-:10A11000EF33764EAFDD8374F6E4239D778F486787
-:10A120004F3ED279BE81F9C3FBA9473A037D970917
-:10A130003A9F3970553ED2F9D37D57E5239D3719A3
-:10A140003BBCB86E7665FAF7221E4F4CF691FD04C3
-:10A15000F22AFF9BF0E38B11FCF8E2FF1E3F52BB9B
-:10A1600091F4E1D19CE1F5A1CBA4A6A13C9C67317F
-:10A170007FAD5EC49F61FD6B1633F9255EF9F2F386
-:10A18000879E403BA457263B44EBEF15C59F837E3B
-:10A1900085578EBB3D0169E4FEEF16FB18B78505B8
-:10A1A000D0FFA1D9FD9AFD18298FDF17783C9DE3D8
-:10A1B000FD36ED1785BF7689E8D312FC9CDBA9BB81
-:10A1C00025F2C75AD46E2FDABD0D2FCF75A0BFF67A
-:10A1D0005490FB671B0E8C25FFEDD2E0ABA154B46D
-:10A1E0000B7B2507EE1F96EEFE3006CFBB613FFAD4
-:10A1F000494ED87E74B2D88F9E0A7E1C83E7E23027
-:10A20000FE54D4CBD1AE0113F26F03ECD3A00A6B92
-:10A2100050068E627F0D2EE609A0A8E8D1EFDBB4D0
-:10A22000F3CBAD3E13C9BBADBD5210F76989267F94
-:10A23000561AEA2796E6A0732EB15EFE33C79B98A6
-:10A240003B3EFCDCD8FB971C7EAE4CEDFBB7C4124A
-:10A250001FF61B9997EC802D7621971492537FDE81
-:10A26000E6A47D0FFD40FD3F07B328AFE9EB450AAB
-:10A270000B2980F745B3BCEF21DD507E8722E477C0
-:10A28000787EF03C9AF571FD02F23C34DCF9B83886
-:10A29000A7C6F3DDF0F60D6C80DAE139AFAE5F6D85
-:10A2A0001FC09AC6AA00F75DB7DB3C68BF34025FE7
-:10A2B00037970DF1E13231158D0F1B849FB771C9AE
-:10A2C00047B41F68EC911CE8DF5DE6E17CB80CF652
-:10A2D00049E6D197AE5BD60D7C1806F748EB785C63
-:10A2E000AE7E1D0FE6FF49FECCEB72F5EB579BBF30
-:10A2F000E6171F9C67AFC4D757C4BC22F79791FEDF
-:10A300006C6D7F78A572EDA6087CDCF4BF8C8F9114
-:10A31000E4DADCDC91E49AFEBCE01BCBB5C87383C5
-:10A320005CEE07C773033CD7FD9F9E1B7CA276247F
-:10A330001A480F7A75E7A968A7E338EDDB65B20F15
-:10A34000A6C8FC1CBADE6E263F6DE4796BA33A45C5
-:10A350009C2FF6FDF66AD49FFB8D0CF5FA12DB629A
-:10A360003ACF6C949F3139D461CE19954364BF7F45
-:10A37000D3F3F775B983E7EF5978FEFEAAEDF378CA
-:10A380007F185DAB4AC0D02FA1389661E5F62382D5
-:10A390004FA245FC844509306758FB91DAFD34979C
-:10A3A000DBCBAF8A381AB789B5637CC6C3F6682F92
-:10A3B000EE4BDC061EE7D392EDDB8E72D2A2723C2E
-:10A3C0003FFEC22DCC00F37FDCD84DF224506FF35A
-:10A3D000A05CD4FC305AFF56B15FBD52FE3F30C87E
-:10A3E000779CFF07F3FF2479F06FDA78DFF49C6C39
-:10A3F00033E046B74E189D87BD81E73B5997F2F38E
-:10A4000048FD8CC4D76FE7FADECC25B9E01D4DE7D7
-:10A41000FE572877A2CB073E467F0FDB6F5671DFD2
-:10A42000817E0FD2971B92B91E533C158867B0F7F7
-:10A430002A304EEA03FCEFD523DB87A706E513B7E6
-:10A440000F4F8D289FFE3EFBF04799BED3C867276C
-:10A450002ABDF9A83FD7DA017EDCF73DC5E36BB62C
-:10A4600059397F6E93385FB2E678CD7F42F30A3C6C
-:10A47000CBCFC723F98AE5E9F96A30FF4F96ABB62F
-:10A480004138FE97E5EA92FF8A413FE8C8FD04881B
-:10A490006E15557D84B7819725B633CC3FDDD8C77F
-:10A4A000E3D4D205BCDAF70BC2DE5D94E7CDC07809
-:10A4B000AF4FDFB358582C9842C8636897F96C7453
-:10A4C0003ED0D0CDE3481A56323A0F6E40FF6709AE
-:10A4D000FA05EB18DA7FCFA9FEC2BCF1789E610BBA
-:10A4E000C8B1E8379FC1D0EE3BFB1ECF37A8FE12A4
-:10A4F0002C6F5CD9AF3B87A8F8EAF335E8D7007832
-:10A50000C94FE042BF4D189D66E7F1F84B2DBD29BC
-:10A51000027EF4E313FF77CB41B417A3D53E3A177D
-:10A5200068D8CF8DB80AD94BFE7B76571C433E6A5C
-:10A53000D85F39F635AA6F1D8BF66EC5EF6B1DE837
-:10A54000A7F8F45A17C51F64C8FD4BD1DE3A92ED47
-:10A550009F84F8B09707A7A2BD9A09F62ADABF9F91
-:10A56000EE9B3A16E1D6E4DF26F47F43BF9BEC7AFC
-:10A57000FF36B378B3EE47FFF7CE24DA3FEE4BF168
-:10A580007F1BE7BFC9CAE10D6CB4F2F52AFCDE916E
-:10A59000EB5F5BF749B281C649BACD42E7D49A5C1A
-:10A5A000D864647E4BCE903C1927E2E9001F3C9EA4
-:10A5B000AFB78EC78188BCCDA58F6B3C9D33791C0E
-:10A5C000C2332E4FA1760B2D0312FAE1178AF3F94D
-:10A5D0001B449C85166775C6E15B80F8602B6B8613
-:10A5E000CEE5B3B1BD83F3BF889F89BEC8EDE86CEB
-:10A5F0008789F8C6DECEF8B912F00DD267E240DFE7
-:10A60000A458984F6E676822E2F3958B06C2875272
-:10A61000F7069DA7C422D9A09F9C0DFDEB0AD09FF1
-:10A62000E278F75AA48BDAE1A842D43DA7FAEEC942
-:10A63000A375DE5488FBCBAADF1879BCE0CBD164CC
-:10A640000774662CA378C1B3EF03BF665DAA0FB48D
-:10A6500034C056537C6076CF3BE4D7B7EF97868DF6
-:10A66000FB7C38CFC6E36F027D1487C626BA081F6D
-:10A67000CACBBF0FA0FDA1AC53C893D166F41AACEE
-:10A6800048D7558CFCF0799D0E03D22553C49D9C70
-:10A690007BE5BF47FB69BFA2F9F1833C4EC8D8BF39
-:10A6A00006F75FCAAAFEEB6005B3FAFD4E4303FA54
-:10A6B0003D8D030DE43779399AFCA3993D39ABBF41
-:10A6C00005F9CC76079350FEBC785726F27500E664
-:10A6D0009937CC3C9BF38CB45E9497A30DA8B794A8
-:10A6E0008D8CE21415676215C1FD28E4A19FE582F7
-:10A6F0006FB4F34900D78DFA68519E7F37D23B5A29
-:10A70000C801D61C45FE44BBC2FD1EF6E6F79F5DA0
-:10A7100005F91DC21F7BF895E219E4BF5BA7484805
-:10A72000870BCEB9990EF8FE8B3C6E8FD8953EE61E
-:10A73000B085E3FF30C56566BFCCE3D61423E713CD
-:10A74000659DAB0BFD835FA4F929FEF4DAB6904C4E
-:10A75000E75B8E138FD4A861FB9BCD5C8F34ECE557
-:10A76000FBEAC8FDCCE5F4C7B13CBD5D3E98FF27D0
-:10A77000D925EF0C8EFF77EE53987E7F17699F44A3
-:10A78000EEE72EB1BF23FA1BC94ED1E23CAA86C622
-:10A79000217E78D5AED941015D1C4C958D8FCB2C97
-:10A7A000FAFE9F12F13B5A5C4C62ABBA0AE3CF0748
-:10A7B000EE63E46FD3E276B4389D4015DF47040CB6
-:10A7C00020F7B2F07CA883E27352594892683FD0D8
-:10A7D000CFB07D12C6E940FBFEBC6C827F3BF3B478
-:10A7E000CB24175509E1B7627C473CC21DDCB20897
-:10A7F000C7BBC946E35931BE239EF611B48E537CC4
-:10A800003CAE73D2121E0F9A02FA17F329B99C2F8D
-:10A81000ADB34D14E7A9C56D68F11D1A5EAA04BE5B
-:10A82000530A1665E17E418B03D914157CCA2A634D
-:10A83000FC8790FB4B0D24F7B5F8BACE3C3588FC6D
-:10A840007E0EE3406D571EEF11895F2DEEE3FA7423
-:10A850007F72FE788AFB203DAAC56B68FC1246C752
-:10A860008015C6DFFA32B7DFAB969808FE734BA7A8
-:10A87000917FF1DC5203C37554D56BE6FC1731DED2
-:10A88000D6D92616C27E95A015E5A7C60797B35F51
-:10A8900081AE85E8BF3DDCB237E704ACF9232DDD9E
-:10A8A000949EB34ADDF2184C07E6A0A41AFD64C6D4
-:10A8B0004CE56A8C6319C8908075CAF6E6CEA27C16
-:10A8C000C2C007989FF6E4AC590AE8897379033B44
-:10A8D00024A8EF2FF87026E5912753189BF0C46F3A
-:10A8E000660668DEDC1F3549F8A3CC4EFFB5F909D2
-:10A8F000785FA07F4D1FF97D78DC3FC605223DDCE7
-:10A900003613D9376E118FC9AA457C269ECC40BE1E
-:10A9100035792C9D67DB98BABF0FCBD3CC5CDF3386
-:10A92000CECFAD79DC5F4C2A1265679AE65FEA0FFD
-:10A93000A0BC6ACD7252FB41B9BADF1CE47E2E3E48
-:10A94000FE5B074AE91C4A8B3365CC913EAB94E22F
-:10A950005174F987ADFC5C94298E74B41F5A8DC272
-:10A960004E15F9A834FF77F3C3ECA4B726FF4B09C3
-:10A97000AE8733077F948B72EA0613D8F1C3C8A55C
-:10A98000D4422E97CE196DED12D86D6FA4FAE7233D
-:10A99000BE8E47CF99E28479CD8EAF343911DEC0B7
-:10A9A0005332CAC904416FE72C0E9FB3DA272D84B6
-:10A9B0007E5BADB09EA17D825FF192BDEE9F25DDF5
-:10A9C0000470B74AC27E676A2CD9ED856A2C9EFB5B
-:10A9D0002D6B7E87E2AE652107642107DE6EE9CF2D
-:10A9E00055F240E5766F94D1DE7E479C3FBF93C51C
-:10A9F000EEA81B66FFBB299FDB873364B514F9C83B
-:10AA000075FFC4776A812F64932748F44BB7ABC8AE
-:10AA1000EF87EC15EE7EE847CABCAF1CE3965BD32C
-:10AA2000EF2BC7B81339CEE3F685E537E5733EAEB5
-:10AA3000C67A88B7E8A672D463FFB0FE62A1BF925F
-:10AA4000BFBFBFC17ECC1CAE6596810C05D6A7C723
-:10AA5000EDDF8A74BB30F7433A8FFD41CA5B1F605C
-:10AA6000FCC45BC68E49312887B224C1B7DC5E3B8B
-:10AA70005AA0F93D79DCFBD162EEF70439C4E32B2F
-:10AA80004BF93D9BDA598CD673AD88BB98E2E0F761
-:10AA900096A69467795A616AD3D98082727ACA710C
-:10AAA0005F0CD28FCDF297FB4A47B6C398DBA886DE
-:10AAB000CB95A96A581EFEDE58A8CF7FDBA3CF7FB7
-:10AAC00067C25F0BC2F31BDDDEE771DE2F493C8EF0
-:10AAD00033703573D03C5D5200EDA5E2E753BA8484
-:10AAE0007F97E20D7F26F673CF4F60549EB8D7B2A2
-:10AAF00013EF1F687E72599417BB9925338EF0416E
-:10AB00007A764012718B2E3A0B6207EF7670FC4119
-:10AB10005D13F47370AE4AEB38D16660D7E15A2FFB
-:10AB2000B790FDA4AD8B562BF037E0B122D512853E
-:10AB3000FCDE6AF46CC6BEE428B38A7AB532C6423B
-:10AB40007DCB3F56482FADB29A29F4F5F08351944E
-:10AB5000AF50980FE33500C45998BE65F4049B705C
-:10AB6000BE500FE7DBEA6424AFE40A13E969E89713
-:10AB7000E87A78A321C868FE950AC5630A98B57576
-:10AB80000723D1F7C7C4BA960D2C44722CC5427264
-:10AB9000EC08F48FFD1E7E5DEE223F5BA17A3B96B2
-:10ABA0009FB714D0FD9CC6C17B478A01812B1476C8
-:10ABB00094B397DF0FD3D6B3265F22D73348C15C57
-:10ABC0005722E320AAF80F4C2311F53E237B5E3B6E
-:10ABD0003F4CB768E58A17C7491EACCFEF67258A97
-:10ABE0007C6A4116AD37A8123294A1FDF1CBBF208B
-:10ABF000DF6AF261C7DA1F937CB814FF85DFA7FC18
-:10AC000034BB83E3BF200DD7A11C559086FAAED587
-:10AC1000E9517D61F9425846B3E3103F500FF233DA
-:10AC20006B3ECC55C2FC83A9052A094BA8E78D07CA
-:10AC3000380E5BD5345CAFC38C5BCFC78DFEC78E3F
-:10AC4000EB8671A1DE613B8C0BF5765BCD2143CCAD
-:10AC500070E34F5071BCCB8D0BE824A44E137806E3
-:10AC6000BE08A05FEAB0DD40FC394DC4EF1E4EE0E7
-:10AC7000E3B1427D7C4D6E148C4FFE587D3CCD0D72
-:10AC8000D2B636D4CB8F596376223FFE52F0C9D16B
-:10AC9000E81FE7A25DF5CB39F94750AE4C895DD589
-:10ACA000864C328D7593BCD1E4DE85E40F2B300FDA
-:10ACB000F2EF9A02A0FB0FB2DF9A839D1F713E96BE
-:10ACC0008BFA0FE4C3B70A122E855FE3470D6EE4DB
-:10ACD000435C07837C1801BFC6476C7A3705206E3A
-:10ACE00007BB1453CD4E65AC89C789ABE943F30369
-:10ACF000269E6269E2F3581520B86F703E42F168F3
-:10AD0000D78EF2FB10DED9633ECB50B0B27B6E0122
-:10AD1000EEC300DEBAFF9FF046DAE5978B97D6E0E8
-:10AD20008A5CC7DAF8D28CBD142FDD38CB46F1D35C
-:10AD30009344DC69E31203C511C1FE8DECFE066687
-:10AD400009A21CBE46D8D15A1CFF8B12F77F060EF3
-:10AD500098D53D61F6F8A571D42AC5690756F278F1
-:10AD6000EB417BBB9EDBDB837A4DDC1BE81CCB65B8
-:10AD700079E7DD2AC553BC24F1FA81B98CDBEB7588
-:10AD8000A27CA143C45BC05C1287E2D93BBB18F133
-:10AD90007FA73D9BCA5364AE7FD8B7B8FEE9CCE22B
-:10ADA000F664E7ADF9540EFB825188F7F932D8CF3B
-:10ADB000FCFC9EEF0FF2F878917EDA4D05DC2E1B3D
-:10ADC000B473443ED22FBB2BD3BF05F965618937DD
-:10ADD0004302BE9A6FE27E57E0BB6D7867A6863568
-:10ADE000ED5672F0FE45D3BB861CE2BBC789EF8AE5
-:10ADF00081EF72747C172C18CFE52F0A538DEF0664
-:10AE0000F9AD30325ECEFF148EDBE9ECFE7D03EE51
-:10AE10002B7ACD44072DEE31729D87C173C2C8E1F4
-:10AE200071C932C1B36F3878AE84FFC3F92D89710F
-:10AE30003E1F691D24292C602F1B5A071BDDFE10A5
-:10AE4000C23FB81ED6F07DE42570CB36E28B9B6FF7
-:10AE50009539BF46737D8EE74DC9307E9D18FFE65C
-:10AE600075BE6A27D6AB93080F75BDF51417C6AA31
-:10AE7000F9B99107FE203CAD42CE69E75BB345FBD3
-:10AE8000998E3A23FAE366D5EACF9966DBF839D68C
-:10AE9000CDB38C1F85DB3DB3D986CF308E71369E06
-:10AEA0004369F5818FDE2F183C872AC073A823C21F
-:10AEB000CF720EF81AF9FEB584C5DBEE06BE2BF88C
-:10AEC000694919FAE326272EDDBD11F24F6E2DA236
-:10AED000FC6B89B7DDF31696EFC8A77CB541223E1F
-:10AEE0003D57CFDB1756DC3A2D2B06E5BFE817D7C9
-:10AEF00013EED7A3FC9D7550CF3D3ABB0CE34BAB93
-:10AF000085DFE0DCDD8CCA6F1C63E721BB8B55F26B
-:10AF1000FB554789F2EFF17EDF18FBBB328C33AE75
-:10AF2000CE1E9883FCFD46D94B45983F227D36675F
-:10AF3000B873AFE24229340AF0521DC7EBD7963DF1
-:10AF400095827E98EA2A9E2FF654AECBC172C3F941
-:10AF500039C3DDFF8D12FB9EC1FB6C625D3FEFFDCF
-:10AF600090EEAFF92C9207A7E89BF021F91D984DC0
-:10AF700072A0EBCCE7CD52D0CF3DC9CBE350AB2C88
-:10AF8000AB92517E4DF79BCA319ED861197B04E389
-:10AF90000C6227548E47BA4EB230A22BF0794C2166
-:10AFA000FAB5AFFA2C230699CBA6E7738D8FEA3456
-:10AFB000FEAED6F331AC4F57E1F8CBCBDB91F818AE
-:10AFC000C6CFC0F6B3BFA5D73783FD45ACB7C8FE23
-:10AFD000479203F8132E1787E0E8A6759586D17D72
-:10AFE00039B8EE3AB4753706E13019FAE81E4FA6C3
-:10AFF000E429A20BAD133C16D24711706BF0A58368
-:10B000006C636597C2853F8A662F72081C8E441C4C
-:10B010009797433B2F8B1B820BC6BF1EE9C0D67090
-:10B0200078B64B4D5C6E88FD81E6CF68D0E6DBA339
-:10B030009F6F4514BFD7EE46BF13B6738D2DFA3AF6
-:10B04000B81B853E9D65F13D688639DCE49C4FFC6C
-:10B05000700B683427CCFF6FA9FE3AC447AB147855
-:10B06000B93F8BFCF114FF01F49E5118660768701C
-:10B0700045E2A3610479180977241E86E8D3978CEA
-:10B08000A9761F6E705E11F369B5F3F53A30DECC28
-:10B09000DFB550C01485FC9B5211C5A16870BD2955
-:10B0A00071BF6440E2F78F347B2212BEC87B7A1AEC
-:10B0B0005CE8EFE3700CACC23B820F166A7E3E4E3A
-:10B0C000AF24019FC9200D7B1EFE60A141F3B3EAAE
-:10B0D000E819797F4DC39B16E715892F2D4EEB920A
-:10B0E00073B78873E591EA4960A7A7C65D8A47ED03
-:10B0F000DC2E6ED04FC9FD4003F7DA490EC60DFABB
-:10B10000298F2968DF4FF21C52D02EAFAD81090084
-:10B110000DDE147E1F0DDF0F64F8B71492DEEE1FF4
-:10B120008FFE959F4C7D82CEAB3E30703F7D247E5E
-:10B13000F68C809F91F87D24F8A3D27C4FE2B8670B
-:10B14000A4BE0A2CECCC16E742CC9F85EBC1E9C823
-:10B15000AA44FF11C8D7AFBEC24D2B16015DCB3339
-:10B16000FDBFC076B730DF64A46F5C8DDFC8CF4908
-:10B1700018F9E1978BFDE364A177CF6FE3F11ED55A
-:10B18000DE518F4D44BBF198910569DD7B497FDE2F
-:10B1900025E03F0F2A3684F59FB193FE5DFCFA7CD3
-:10B1A0008AE328D86C187A4F03FE8E0A46E9DED36C
-:10B1B00028DE1BA7CB9776A7E8EA8FE9C9D6958F3B
-:10B1C0000D15E9CAC71D2BD3E5C7F75DA3AB7FD526
-:10B1D000F12A5DFEEAFE69BAFADF3A354397BF7697
-:10B1E000E0BBBAFA1F0FFA0F84DD10F0F615C2BCEF
-:10B1F0001788795F7F719EAEFD9F62A61C437E5CBF
-:10B20000B081C7A557028674EF8B7470FBA209FE4C
-:10B21000207D27B3018A076C084A9E10C3F836BD0B
-:10B22000FDB1B4A78BF078B9FBF805AEB90634B917
-:10B230004F170AFBE32A76158F67FD7ABAE6B3BC8F
-:10B24000BF8BAE66B79EAE56554FD7E8423D5DED1B
-:10B250001E3D5D6327E8E9EAF4EAE91A5FA3A76BFC
-:10B26000824F4FD7A4D97ABA26FBF5744D5DA2A7B9
-:10B270006B7A939EAE99CD7ABA6505EED4958F44DC
-:10B280006F4D9EE6B42FD7D51FA4BB6F09C537E518
-:10B2900075FC50D7BF46F700FC41BA17301187F94B
-:10B2A0003FA47BE1283DBD416F8D1A359EEC8D1288
-:10B2B0004C671708BBDE37BCBDA1C99F70FD1EBE21
-:10B2C000AF1D492E5DA2CFC43E77447D16B1CF7D20
-:10B2D0008F81BEA5413690DFEA56C19F87A338DE35
-:10B2E0003FC7A2ABA11ED4990070BD8770C338EFD1
-:10B2F0004515933FE2BBACDB88FDDFCEFA289DC34A
-:10B300000628F53307E9EF79CC43E902E63309FF74
-:10B31000C4F45109E8B7E8AF40FD7F61EE5B1FD090
-:10B32000B9D61BF157F40EC547787E92C7D849218C
-:10B330000F4EE0390AE4CF5A07F5ABEA0AC3DB49FE
-:10B34000E16F9C3749223DCDE4288AEF9A778B4400
-:10B35000E744F3FE93A78B46493C1E24226D6DD62D
-:10B36000F0C7F7473B47A904471AEB16F61CF3DB77
-:10B3700072A81F7EEEB1CB44FB58B785C3F7ACC4AF
-:10B38000940971741D8EE8EAB670789E35320BE22E
-:10B39000F369E65791180F2820A2F83D8C22E48F1C
-:10B3A00079FFF95636FAE9A2A25E98557D359ECB13
-:10B3B0000456919FFC7B4CEF27BFBD49223FF9F714
-:10B3C000004E48DD0E8F1BED7C2DFFB080B71AEBD1
-:10B3D000C1F7247793847EA97F587FFB7FC8EBFD5C
-:10B3E0009DFD0DF6C3385CF883F4D3FC9E85061EE4
-:10B3F00027317037DF1FEDFE1EE3FEBBE640650020
-:10B40000CF45653094308ECAC8EFC7EF1CC5FD9E8E
-:10B41000C9AC8FFC0BECA866D7FA49FE9688FB17DF
-:10B4200067C5B9E2A22E0BC3389D927D87E2F01C5E
-:10B430007111F0601FEA61C54FEFBF946C792D8EDA
-:10B44000FBFD8C4EBC57A9E9FF91F9546127C3EE6F
-:10B450003100DF350D677FBC5AC4E3035A5BFA46FF
-:10B46000E139A006CFFD2DC7282F2B1E86E797F8C0
-:10B470003E5478FCA3C905E561F24EB141FB303979
-:10B4800064B4F9E89195352D7D74BE6814EF58AD1C
-:10B490004D5BEEF087D989874609FBC71260B84F2C
-:10B4A000E02A0A53E524CAB5FF627C1F6D76433F4C
-:10B4B000E1F2F362020B3F1F686F394EF0AE91FC70
-:10B4C0007EECC49CCB4256A08F59C1BBC0F07DCB53
-:10B4D0000DC7308ECB645FEE09A923E3CDEC562E69
-:10B4E00084CBD3B723E4E94F5A068A719CD6967E63
-:10B4F0000D5F0CCF6B03C9DCBE6E6DF984BE1BC043
-:10B500003E447E7B754BC12115CA3F80BFF8DE8E5D
-:10B51000D9C5E162175DA457E7083E405F5C3AF089
-:10B52000CF07CD46E2B315E9363A2758F166DE215A
-:10B530002FAC67134C57FE06700F8DC3F16412F2E7
-:10B5400014F8C987F2C194A2D079419C6306D1E96D
-:10B55000EFED4FC3AFC9CAE89D2453BA8DEC822BDF
-:10B5600085F36FA3F83B4083F6C94517C9FF150261
-:10B570002FDABB4F1FDCC3C8DFB3E25EEE375C518E
-:10B58000CFE81E026B869F8A21BED1F44C02BE50CA
-:10B59000031F3B5A60C541170FB55898BF00EC1008
-:10B5A0008CDBCF19A2638757716288C1C66A571DA9
-:10B5B000A60F4D38D181E2EFE1895FF4618A67041B
-:10B5C00038BEA38905D13EA6B37F18DFB904F23097
-:10B5D0007E8C288FF1F37CAC288F9DCDF3E9DEE7DC
-:10B5E000A46A042CE23C2BDD16373517E5F402C6BD
-:10B5F000EF818B7720B60B7D916A8BABABC6F2DB0C
-:10B6000019DD0BD1CA7F2ACA936D1FB5E7A01E9919
-:10B61000A56FBF45E021C9F651C7243AF7D2976B11
-:10B62000E74A09B6F3C7A87D89BEFC51D1DE6E3B5F
-:10B63000DF3709CB73F5E33F28CAA36D5C1E321FC9
-:10B64000E3EF1588F20744B915CB717C0F2F97B53E
-:10B65000773944BD75020E8CA923BFEB28EE77DD48
-:10B66000D1622921BAB45C24FA3CD4C2287F6B5140
-:10B670001CC909430DC7779C8BF383A3990DFB4E1F
-:10B68000C1AD42AEC5A8FD5EEF30724F2B8F73F097
-:10B69000771864B789F8C96C137243ACC741B921F4
-:10B6A00035793893713FFDE5F81A16DA05B48F3213
-:10B6B000E007F93AED1E03F387C9CB946551CC1F1F
-:10B6C00056DFBD204E974FBC3D4557DF352B5B57AE
-:10B6D0006E2B2FD295B35971B46E960BFE8A2A2920
-:10B6E000D3956BEF43B0DDA29E58BFC6DC6B74F5FB
-:10B6F000CE17AAB1C8E327A782FEA178068F05E579
-:10B70000C3727B7612EA9FA75B2610729E85750531
-:10B71000462B7BC6C9E3DC9FC1F34328FF598B97B7
-:10B72000BEEF817215D25DB0EE54A8DFD5E2A0FC69
-:10B73000E32D6E4AB7B7A894FEB4A590CAB7B47803
-:10B7400028FF18F48FE9A3D00F7E7FA4A586F21BF3
-:10B750005B7C947FB86536E51F6CF153FA40CB12E1
-:10B76000FABEAEA589F26B5B9A29BDBF2540696B15
-:10B770004B3B6F57C4F5CC33E25EED3395FCBE7C9A
-:10B78000241D3B8B841F52C4ADD887E2563A8B30C0
-:10B790006EA5BB9FEC702D6E05E74DFD59F9FC239E
-:10B7A000FB7BAA88DB6F45AC6F55345FCF743E9C42
-:10B7B000D7E3591D0D7C9FDAC4E990D53340E5C924
-:10B7C0004B382D9E12FCC95C01965641510254EF34
-:10B7D000ACD45715CDCFD529CE91B9619E15E2FDD8
-:10B7E0002662BBA001E1522670FDA9D17570DE4E24
-:10B7F0000E27CE7F3878F70B78E5F26EFE2E4B4D94
-:10B800004708D93ECADB44EFB25866FB420AA42E71
-:10B810009F9FDE8928BA38053667206F2E5EC75491
-:10B8200048D396E9F76D290BCA74FB22F9E2434C21
-:10B830000539602BD1EFAFA27297EBDA59D27EA80F
-:10B840002B37B956EBCAE7DD95B5C68DF84CE5E761
-:10B850004BE60DAB5832C0B5B07323C1F59198C714
-:10B860005949A5FBE5817D5ABC05DF5F3C29F40BF6
-:10B87000B36C207BACC0C9B3F9B10103EA874FFFB9
-:10B880003596E4D2138F1B82E84706F164C0F55F5A
-:10B890000C661F9697B27ECA63A80CE6C73255C6DF
-:10B8A000FC383640FB2BD85FBC5F8471ABB2FF71B4
-:10B8B0002BE4CFA4FB9FE4717321D29FF9829EF900
-:10B8C000DA7E6AB312E95FEE2F22FF8DFE7E5D9B6A
-:10B8D000D85FB459B99F6E95B32209EDD6B323C48E
-:10B8E00039DADDAF1E5D00F8B6271FA274D02FA78E
-:10B8F0001A86BD3FFE4504FF8F026617FCFF05F266
-:10B90000FF99F2B713D10DD5903B40EBE0ACE47555
-:10B91000CF45FCBE2E737E841D17CE4F11F855F611
-:10B9200055BAE7021E9537733C013634CE132DC746
-:10B9300073300E41CBE78B38DDBD2DC9B9D561DF42
-:10B94000D5624EC742D65783FAAAB0C4E00962C78F
-:10B950005E87CE8F61CDEDF0E27B084A19F3A098A7
-:10B960001BC53A56A3EE56FE26539C9572F86AA65E
-:10B97000C27EC6660B318C4BD3FA65C21F728F90A4
-:10B980009B5F38AA63E99DCB9441F9873A927D6128
-:10B99000F3F6211F7DD169E4F33AAC2F2FB471BFC8
-:10B9A000E1A242535095F05DB50E7AC751D921B14D
-:10B9B000B42C846312E1811D8C263E8CDE3C9A05FA
-:10B9C00060BD943BFD9662F4DB85D483861CC193F5
-:10B9D00050AFBED8B413EDB302C48B0DF1726B6ED1
-:10B9E000350E9D5B48F85D28E63DBE98D3AB2D3DF6
-:10B9F000021EE6F1E27BA78B3A353F8E7E9E0F96C4
-:10BA0000577D07DF856CED93B95A8BC0E77A63DF0A
-:10BA1000E8B9D0F5997E804B2638C717A30DBAB97F
-:10BA20008205488FF3F9D53F2EB1AD5924976A4866
-:10BA30008F8F37B0F0F3532D9D58CCE5EFB1221E18
-:10BA4000876A771F257E1CCA1F39BA00F0F1B481BE
-:10BA500015D2B9B181EF8FB5781D19FD0078AFA16E
-:10BA600058C845D6C6A6A1DE761A28FE54EE8AA28C
-:10BA70007BB3B253A1B8F7365BB5E34EECC7A1D0A8
-:10BA800039D11479621FDAD166A7611CDAE14776F1
-:10BA9000FEB00FE386E47485A1DFABCDA1703B243B
-:10BAA000CD40F1808AB3DA82E74AF9B6139588CFA0
-:10BAB000435D3FA07722E4EF8B981DE117330A9294
-:10BAC000B5B126EA3F90A688F766BCB56313C59169
-:10BAD000888AFBA19A4F70BF7DC471DE8AFB02D5B4
-:10BAE000B688FC81F715F37DA211CF0F21FFF8CAAC
-:10BAF000F34E945FAF77AD89CB427B3AA8902D523D
-:10BB0000F8D7D6147A0FA1CB44EF356878CD0C283E
-:10BB1000BA73C8F4667DDE1C711E698CB827B75CE9
-:10BB20008C8F2797A1B0F918DD7CFFC65C36DAFF51
-:10BB3000DC572CDEE914F97B447EAF3190E201FC46
-:10BB40001CEE5A9489F3BAF0829FE2CE47B2FF27E7
-:10BB500015AB62BC80D540EF0287AC1887BEBB85B1
-:10BB600079D0CEB30415BA07B047C8B35C1BE7FF62
-:10BB70003B4AF87A8D4C733BF8BA539E890A4623A8
-:10BB8000DD1CDD650158E7C5AF4E652AE8C15C875D
-:10BB9000D780FEF7DC669307EDCF29BFB0119F9CDD
-:10BBA000B7F1382EA5F90115BFB7EEAC2854C3E0A4
-:10BBB0000EB6383C289F76B6583C181B1F1C41BE59
-:10BBC000E6380D143FAF1A783CE72EB11E7715F317
-:10BBD000F788760A39B34B09CC403877013D316E8E
-:10BBE000FFD0066E1F2F5F65213896BF9E43F6D5A6
-:10BBF00048787BA2C5EDC94578361852D05F55B953
-:10BC00002E773DBEDFB1DCCEDF3796638B1EC3AB34
-:10BC100011ECD74686F67C6BCC359EF961F25D8ED1
-:10BC20009D58887C25CB8114F4E7F43C7DE1268C7B
-:10BC3000E705FA6DC57CA8F8839B307E77AF3D9011
-:10BC400082F1BDC78A3FE2E50981AD18DFDB577C91
-:10BC50009297A707520C903F5E7C9A97E705B662D1
-:10BC6000BEBFF82CCFE3D91BC8CE53C5E76F0AA0DF
-:10BC7000BFC5E4598202F9E7007F092CB16E919E9D
-:10BC80001678D1CA9FC3EFB001DB2FD2C8F283A2CE
-:10BC90005DCF08E52F8AF2DE11FA7F45B40B8DD017
-:10BCA000FEB068776484F64745BB632394FF4A94EB
-:10BCB000BF3142FFFF2EDAF58DD0FE6DD1EEDD11E2
-:10BCC000DAFF56B43B3E42F9FBA2FC3F22FAFF40AA
-:10BCD000D4EF17DFB3ED1BDE47FF7D36C811944B61
-:10BCE00085F60D71B8CE77B69713FFB756F0732A65
-:10BCF0008DDFB32546EF0EDF56C2DF3BBBAD84CBF5
-:10BD000071A584F339F0E1C3C877CBDF94299EA8ED
-:10BD1000D5E039154439BADE40F6C0F2D7F97E7D58
-:10BD2000F93A25187E1F486BAFC1BF06E103C66D07
-:10BD3000C314D6DB97C5FC9CD1EC767B6AC3E4992F
-:10BD4000D1A1CF83BC602877417E53DC78E1BAAAC9
-:10BD5000F6C2723CEB339005A2D45B42F88E886247
-:10BD6000177AC151DE5188F0D9147A3F4193F3CC50
-:10BD7000E6D6F935DA6C0ABD2727DB79F9945F4CF2
-:10BD800074A09DD5C6FC7D5E6CEF56C88E3FD45E18
-:10BD9000E640B967B22F70E0FAFDB894E3BDBAA1EE
-:10BDA000300AE5B5FCA081E4F711075FEF3BDC3C0E
-:10BDB000CE0AF40ADDAF0279ED411D51C042AB500D
-:10BDC0006EEE7DE8E05CEEE763F6B115747F493B0B
-:10BDD000579794B07D406D09C74FA6D0230AEA1744
-:10BDE0004877958B7B3701EE8FCA54983B35ECFE34
-:10BDF000706D89CCEF3D69E7A1722DBDAB95B15255
-:10BE0000D19D23A4DDA3CF9B22F48612A15772DA21
-:10BE1000414EEACE4F1CBAFCB74A849FC7C33C6868
-:10BE2000C74EF9C5069287E751BF4923CBBD41F9FB
-:10BE30002BE4F12E4400CAD100BFDF7E6843D9AFA6
-:10BE400090DECBD719E83DEB2B95A30AE218F090D2
-:10BE5000E797482FC0845270DF74393CE4197D7134
-:10BE6000F4DEC765F091F768791CCADB3CBF42FD80
-:10BE70005FA2372E83AF6725CF713FD2D11925EC52
-:10BE80006A6000F4DBC54575E1F9BE49F853B43882
-:10BE9000652549E1EFF58B7BB2B2E0E3FB99578D65
-:10BEA000CBC1F78A9AC8BFBF62DF3D6EB4DBD71A39
-:10BEB000FC0ECC1F8B9B3680E32C874D3FE26F2F0F
-:10BEC000F641EF72BE7D33FA4DBA8326ED5DCD109B
-:10BED000FEB30FE38FB4773BDD64AF897CD5CDD55E
-:10BEE00030DF6EC5518C266847C9E44D46B049F72E
-:10BEF00099D8607DBCEFF7F41183E8EFC64DD520EB
-:10BF000097F64531DDBBA5FBD0CF4EF9E99BF09DFF
-:10BF10005218EF4619F6663B9F99B5C976F5103C65
-:10BF2000BB9FFDEEA655E8B013FB1427E3EFCD9FB2
-:10BF300051FB6390B4B05F595F82FBF5AE1389E1AA
-:10BF4000FB75AD7EACA8DFD03BD0F08C4AF53B4A08
-:10BF5000801FEA7B06624A08DF0315E1F563841F50
-:10BF600020ACFEA6AFAB5FA8C1F3CCDB3797F0FAED
-:10BF7000DBB0FE59B53F91627A22E089BFB4FF9DE4
-:10BF800004FF08FD1789FA67426F53FDB3AC3FB158
-:10BF9000348BDA3D85E39C7BE3ED0A31EF443CC70B
-:10BFA00079D7E6FD197E6FC13E707FA734A9F8BD31
-:10BFB000DBD2E140FBCD6AECF0A11CCEC5F7C72671
-:10BFC0000CA5CFA2F2187FE9F7487EEEB6B0F85A7A
-:10BFD000E4D76603ED6F7AFA0D0F205FEE489BE819
-:10BFE000C0FDF33E535F5909DAAF076C64BF1A32E4
-:10BFF0003FB5A2DFDC5CC0D7BFD5D9E42981BC3511
-:10C00000BD84DE0F95EF5DDE4DEF98DFC7DFF752A1
-:10C010007E6CF2EF46FE0A2D2F5C18B6BE7797F2C3
-:10C020007B96EB5EB36DC0FDC13AA3A7A300ED7094
-:10C03000BB42719FCA8F0F4E23FBF0E70646F21FEB
-:10C04000E65905FDB6CD55E8F7300C94CEEB2B2123
-:10C050007CF87C55502F234191F07ED0FD8ACF8211
-:10C06000E71D6661D7EDF0F0FB61DAB81784FD7962
-:10C07000A184BFB7B623EDC27B8B5DF8FE8389EE4A
-:10C0800075DA961942A618BCE7B6F3D462A46774B1
-:10C09000FF3ABCE71C95A238707E3FAD85323A97D7
-:10C0A000EBA6EF817A03ED1BE29719BCE87F8CCAFF
-:10C0B00035E9FC1D361827DC1F1233DAFF47A4E7E9
-:10C0C000B837951B11CFEEBB0DF43EEA83EE772D0A
-:10C0D000068033A65CDFDE3151DF3EAE5A5FEEAA4A
-:10C0E000D59727CED297BB6F3745F875F4F9268DD3
-:10C0F000AF4026D8404F45F1221665BBD082FB9E4B
-:10C10000B5AF4531A2CFCA4D1D05B83EA307085FA4
-:10C11000514551E417589B6C22B9BEB694FBF50FFC
-:10C12000A79B6EA43CCC0BF96347DA51DA8F5C8293
-:10C1300017DBA9BF62FF3616F61DFDF2A3BD9652AE
-:10C140001E57C3DC15E8C763240F9F95BC9E438828
-:10C15000EFB7B8BF624733F7633F388BC741D20CA4
-:10C160002A70BDF3FA31960D7DB82F8BB1B5DF8DF6
-:10C17000F19D91784D14E70D3BF0762FF29D9FBF16
-:10C180001BBD46BB6785DF2BE8D604BD8B366BB481
-:10C1900078EF4FD809B1EEF892B6B0FB1A89C26FAA
-:10C1A000F2F0C47956D41FFBC43B2283FDA9342886
-:10C1B0000F79457F54A9E6AFE1ED3769E73C229F4F
-:10C1C000E0E4F97D47E26EC4F5B569565C19EEF717
-:10C1D000D70AFB2E36CDE41D05F37AE49829208D8D
-:10C1E00081BCC28E18C12ED817C7C735BD1E15C059
-:10C1F0007B818FB8CBE99E61AD80FBB94ACF3BB85C
-:10C20000DE07601DED84FE1F7179AC65E2DC340051
-:10C21000F051A8159828876ACB68BFFB88D763457B
-:10C22000BDF9489AC78A71DAD664C581716B716E9F
-:10C2300085DE897BC4E277A0FD13078AD484E749B1
-:10C24000E91D53E97E1DE0DA50C18F1A98886FC44A
-:10C25000F8C27881CF1DEE050E7C97C195BBFF5FBC
-:10C26000D04F1F8FFDC5F0768827A7C0D3AC52955D
-:10C27000E07689FEE3173C47F5F1A7AD22AC3F41DC
-:10C2800047D35416C47D9A36BED6CF60FFCC4BE759
-:10C29000006B7EC5F1B62A9DBF8F65BA8BD17EEE4D
-:10C2A000B94AFF5EE4B381E428927729EE942AE448
-:10C2B000A394635B67E0BD8B35BF8AE2E32CE4FCAB
-:10C2C0009EA230CB7538EF04BF03F118B95E938F8F
-:10C2D00074D421536A74895CBFC90A6B97E32E5DDD
-:10C2E000C7C96E5755FEE861D673C47A493E36F029
-:10C2F0007DEC3F725D6F8FFE602CD72361DFE5CB55
-:10C30000E7DBA4FE75248793155A67E911E3E13B47
-:10C310007B98979841C5B8E8DDA54EC1C7A0974A5C
-:10C3200091EF1D936CFCBC9DF8ABEAF90DDFFD3578
-:10C33000E42FE0EFF3815AA9C73AFA482FF6F80B39
-:10C34000B0FE36C5FF38FAD3B71D4FA2F72BCDD1BB
-:10C35000FCFD5153C47B299ABED85DCAFD486AC40E
-:10C36000BB9BDF34ED4E4B2B7678B0BFB77F6B496C
-:10C37000F8C7DB3F6947BA57D9604D3F5372F32680
-:10C38000BCFF6C7D93973F0DF980827859467E976C
-:10C39000C31977D2FC5BDF33933FAB54F66CC63CDA
-:10C3A000FBBD95FC717B0F4C9C8DEBA4D55EA1A2CF
-:10C3B000BD7F40ACE37F1569E4BC6493C78FF64052
-:10C3C000E4F7674B35FF9BE77817D0B7749789DEA2
-:10C3D000711A8C8FE8B2F2785461872E10F26CC11A
-:10C3E000C1F5198718BEC351F75A29B45F60AF4E23
-:10C3F0004478522F4ACC0FF26F9B389F4D753D27E2
-:10C40000A19C49731DA944799FCEFA56A1DC486FBF
-:10C41000D29F97A55E54A8DDBE142FF5873F18075D
-:10C420006A62624DC7F9D92A94F329FCBCC5E48835
-:10C43000E271A1EE6ADD3D6AED7DDBB7851C350159
-:10C440004E8D6590DA147E6F3FA2FEEF443D19FDDC
-:10C45000F6E8FC771C3D4EFDDA944FC3E34D715F67
-:10C460004A426B193FFF043C05701FCA62E3F8792A
-:10C47000A9D7AB86C7DFA682DC359761FC4980E28D
-:10C480004492C5BD082DAE0730E044BF9B16F7B1FE
-:10C4900093E9ED112DD5F6E7B9CD32ED3B8A5FB5C5
-:10C4A000F2FD413B0B5A25F48731923BB91BF8F959
-:10C4B000B4E617BB0D1713EA257C0F97C6EBA63819
-:10C4C0006ACDAE02FA92DC5917F1CE94F68EB661BF
-:10C4D00034E78B6D2D0EA2A3569EE68FA4A3FE9C7F
-:10C4E00053AB977A3195F9E3C3FB0D527FA9CDFB8E
-:10C4F000891F522F6650F9B616F532FD678FD07F2F
-:10C5000032F1CBC8FDA751F9F6D0BBCEE9808A9FA6
-:10C510000EEC77FA54942BA1A99E61F09C7A8F5E61
-:10C520004E8EE9D1CB5D0D2FDB14AFAB0EF0BDED20
-:10C530001E83A78B61FCA9BE5E4DD66F9CFC5D6B14
-:10C54000AD7EC83513EB2FE3F5BF754A5FDF577932
-:10C5500020B23EC177FD457DBD48FA44C20B70252F
-:10C56000DC1406D7248BFEF7DACD9E7B095C09B775
-:10C5700084C175835B5FDFBF6A78B86E2C347F2D12
-:10C580005C5ABDEF4CB8B27A91F39859631E01EF33
-:10C59000BCFE2DB3AFACDFDB967C7DBD3B9A23C7E1
-:10C5A000096871DB3A7B24BE99DBEF0E36407126B9
-:10C5B0009ADD11C71C22FE8BDB0DEFE07F93197B08
-:10C5C00060B46FCEE804C4BFF7F64755BC1FC3F58F
-:10C5D00015ABE5EF56C2BEA434FC5DEE21B8565350
-:10C5E000BF2F61BC13E9598B07EDCEE25466494673
-:10C5F000E3CB1DCCC6F7C7EA476BF29AC79717097A
-:10C60000DC3D9BD2BDDC49EB3C1887F07CD371EF5D
-:10C610001DEDBD67F4F8A1FA23F95B343C994CDDBC
-:10C62000F47B1D06EA6D1ED40FEF6211B4DB75B307
-:10C63000398476B516877A3C7ACED10495DE3D589A
-:10C640008DFDCFBE65EA1ACC4B87E3D5E536BC3706
-:10C65000D5AFDD2F5D83785B66F167261AE87CB580
-:10C6600000F7C3CC172F2E23FB4A878BD3D0E0A92A
-:10C670009638FEA3D2FC0FE338D586BE1D3EFCA63D
-:10C68000F4F17DB62381BFBB84EFEB0CB3FE353CE8
-:10C6900054897E0E193D5F0EC0FC0E6D8CA57BF893
-:10C6A0000BE26F99836FB22C34F812F1003D0CEE5F
-:10C6B000ED04B76D6E6632C26D14705B1204DEBDA0
-:10C6C000B95F07F760BCCC7D92F67E3AE59F0F38E4
-:10C6D000E9BEBBD9F0F9BB33510F971A3C68776EAE
-:10C6E00003FB02DF77FB3F02DFDBF18C258EBED33D
-:10C6F000BB6F6E71EFCBBDC940EFBCF8AA5E203AAC
-:10C70000ED6AB07970DF3E97A9F4EEEA7C710FE62E
-:10C710000F95FFFD723FCCEFA5D1FE83388F3BE232
-:10C720000D19EF121CFE627A476BE295C5CF6AE7DE
-:10C73000F033847DB050E07126F352DCEE4DCC6FC7
-:10C74000C471DF3E6BF2A25DFAB68847BE8505E88C
-:10C75000FBAD2C48E96D2C44F5BF872FCA42FEADD6
-:10C76000E8D1E9CD005FDD630579B81EC3F0FE06B0
-:10C77000D219F8E50E17E7973F2621DE3B13AE8866
-:10C780007FEB248EBF0746FB7FC3D7ABEAF2204C7A
-:10C790008E4969E847195C3FD5099CFF1447DED7ED
-:10C7A000AD9FBEF3DA7D7FAF2DB902DFFBE23F37ED
-:10C7B00078EFA278718CCB77011DFA547ECF11C42B
-:10C7C000863D0074AAA994296E6FED67E27E363A21
-:10C7D00031A0DE2FC7CAF43E99762E395DF4373D7D
-:10C7E0008DDF57ACAD9CD9160B7899F2657F79082F
-:10C7F000D29A34FDFDC5A9AE2E7AD27C5AAEFEFB8C
-:10C800008DAC830E886B4BF471E6D323FC9F87704D
-:10C810006CE0AB8BA345BC64112B0ABF6FF01DD13C
-:10C82000F67CEDE7A673307EC918FF57488FE5DF29
-:10C83000FEC31CDAD729ECCD7130BF867F97C99E25
-:10C84000FCA80566528071D516E60583FF24D8152D
-:10C85000983FD5E2A6F434D801987EDA5248E567CD
-:10C860005B3C949F35C6671903FDCE6BFF4C417D41
-:10C87000B4568BC716706871856B45FCC40AFBF211
-:10C88000E318BFB08202DE192CF68E2908FE9D3D0A
-:10C89000DD473185EF32EE43566C94C8AFB3F08874
-:10C8A0007F0D9279F11BFDD3514C8CFFCD8944DC77
-:10C8B000A7D7A31D0BACBF22CE9B340658C0DBFB11
-:10C8C000E1D178A8FFC7960904DF272D5E82EF4FDC
-:10C8D0002D3594D68FF1A5533DF619BDF3F4ED67D0
-:10C8E0003E54F0F7B34DF64AE4BFBFCECB8241C011
-:10C8F000EB662397EF9B41BEE3FAAC2C9DB1FD1E86
-:10C9000086F2D75F80F3BC296EFEE478F83E7DC2E4
-:10C910005C05EBDDF225E8A0AC213EBC1C5F9F79F5
-:10C920004522FC9C79C549F8D0F0542FE875E660A3
-:10C93000F177F0DDB3578EC9147F7AFEA281E03B18
-:10C940007F3C8AE25323DB2F3F909384F6D89F806D
-:10C950007E78F0B1FC4031F9E3FFF4ECBFA8E1715F
-:10C96000BF7F8AEBBEF03ECAA9FFCBE514D89B2758
-:10C97000B7A21C4B4BA1F77B06E3D5585334EAB161
-:10C980000693585F206730FFA728BE0FAEF8796A7C
-:10C9900015AE171C0FE3BDCCE2F760407F1FFC1003
-:10C9A000FA3BB8D54DEFFD7CBAEFB16C1C7F6FF749
-:10C9B000C2F7B742FF6782FCF7609C61DD675F44A6
-:10C9C00079BADB467ECBB512C085FA744F0AE50B07
-:10C9D0002525AA999C19411E8722A90ABE7FB6EC7B
-:10C9E000B92D29C85F784F1DE3EA5FDA184D72EA66
-:10C9F00025A3E78366EC6F3BEFEFC987EEFDA80741
-:10CA0000D307EBCBEE45393786C7312EF8C9D22292
-:10CA10006C0FFA9A7EDFF3D3CF4B21F48394761E0A
-:10CA20005A8D714C63B67D68488174EC6EA915D33C
-:10CA3000E2F469C7D07F70D71895DA8F7B264BC692
-:10CA4000D8F4A294E0FBD7F3B8119D7E2FE9FCAC9B
-:10CA50000AB7999A9E2F92BA4F77E1BE38E37819B8
-:10CA6000BFDFC5DFAF3ED03BF39DDB18CE032C0804
-:10CA7000847BAE89E22E5830D085743EE32FF4D00B
-:10CA8000BB2ABEC016E4AF33FE44BA5F78D010882C
-:10CA9000C1DFE314F880FFBEA1E777BF1583F1146F
-:10CAA000B1FB8D0C7F2F76FDD88129141F92AED259
-:10CAB0007E3C7DC70D35889F86FD07BAA89F651609
-:10CAC0000FFA63971CF89CEEBDB0A93C0EF5CC7E26
-:10CAD0009E7FA0DA4BEF9D2FE9FA33CFF7F928EFCD
-:10CAE000930359747F623EB7771E13FA8CF58F66F5
-:10CAF000E1EF2169F47A008AB17C73562019DFBD19
-:10CB0000D2F420E8AF8770FDA1DB91DA3B66F27BBF
-:10CB1000F257A8BF4C421F69FD3D66E2EFF4A21830
-:10CB2000C1DF8BB3CDC4F5EE1E9037C82F9ADE85DA
-:10CB30007177E0BA3589FB32A9A064C7C27C521F65
-:10CB40003373F97D85E347DE67D5EC90D9F1AD7499
-:10CB50006FF5D354FFCF701CEDFE2A533CF4AEE0CA
-:10CB6000EF53BD4F8F49E0EF75E01C402FFE02F3FD
-:10CB70000D32D85139617694E5CAF4E2DF52BD072F
-:10CB8000709C2BAD1F2987270AF857D80D8487156D
-:10CB90008F9AC91F3651DC439D78FE7834CA9315AD
-:10CBA0007F2E23B9D2CAD8B0F879B985C779FF1BCF
-:10CBB000FA1120BDF68B7E99F623470CCB8E827E30
-:10CBC0002510C87F38D01A5B4E792F92FBBA2F0CF4
-:10CBD000C3EE17B514E8F52EC9E92FF5FE87EBBFB4
-:10CBE00074D0EFCD64B6B82B9AF7D0FB3EFAF96B50
-:10CBF000EF6CC1FCFA51BFAFF8CC40FCBBE2B332E2
-:10CC0000929BBD57385FABCB7B12E18C9C0FC0FF72
-:10CC100029D22712FE417E1FB832F8BF2F31FA7D8C
-:10CC200043A0AEC8BFDD2BDE31E85D5A42EF691C80
-:10CC3000C4F748506ECEE0F78E7AC5FDE4DE0407F7
-:10CC4000BDF7F19291E703B78AF6E27DC8DE5B5348
-:10CC5000F87B1DE6A65F9762FFAD3C3EAED718A4F9
-:10CC6000DF53FBFF00D94A3097008000000000002E
-:10CC70001F8B080000000000000BE57D7B7CD4C505
-:10CC8000D5F7FCF696DD64936C42C88590B0B91078
-:10CC90008206DCDCB806582041B468038802C6B8B6
-:10CCA0002101426E844BFBC4969AC500A2C51A1E90
-:10CCB00011D1A22E14282ADA50115183CF0A4269C9
-:10CCC000BDA5D5FAD86A692278E59210B40FF6E1CD
-:10CCD0006DDFF99E99C9EE6F49D4F67DFAC7F379F5
-:10CCE000E347C7F9CDFD9C33E79C3967CE6CFB8FDA
-:10CCF00006B9BC4EC68CD6B939A7F3197BCF67F0FD
-:10CD00009AA3196BD1FCB71A0B18F35EB0B0DD69AA
-:10CD10008C6D89F1272FE7F92DCBAEA2FAEF3136D2
-:10CD2000B32D07DFDD49B13C3DF837E3EDA5769E35
-:10CD3000CFE5799EBEA4B1F9543EDB9D14C3F30B3D
-:10CD4000C3A346B36B787E876FF7D6387CCFA67EB9
-:10CD500086185923D54B13FDFCD12CDAFD81F1BF88
-:10CD600024C61E3533AF2D96B1F1AE45C35D858C1B
-:10CD7000796E8C30B16814BA93343E9F47AA86B35B
-:10CD80007B359E6D7D88B178C6E65B19FDA9F150B3
-:10CD9000D13A86B179E2335BB078B7CDC3E733AF30
-:10CDA000DAD6A58DE6EBA8BE2BD2C9C79BE731FA30
-:10CDB000C3A278859B4ADC9DD9A2EEDFD331AE9B1E
-:10CDC000C66555837886A7267F25E3E3BEDC6365C9
-:10CDD000F772B8FC1D7F5302298718638319FBD4AF
-:10CDE00026C6AF6F9BFAC069D51FFFB7DA62DFA80E
-:10CDF00045A33CD5C7F8F8FB87780AD0FFF243D7A4
-:10CE00003D70DA1AA857B5B8248B1902E3868E1341
-:10CE10003A5E0BF0C6C71B063CF2262DBCC000FCD8
-:10CE2000B5D97CC01F33F5FC6129CFB7CCBFCA751B
-:10CE30002FCFCE9C63756B1C0FBD07C27C611ABEE1
-:10CE400087BBB1AE96C3913E03CFDFAE09F8B7689A
-:10CE50008CBE7BF79B7DBBF9B73A8BEF893DBC5D00
-:10CE6000DDCB235D7C6476D0C2FF83F21723447947
-:10CE7000943B6D7D01CA1308BF2F999DD154FE6B61
-:10CE800023A3F2707F560C877753A2678E8BCF7BDC
-:10CE90004818C7BF1DFD8AEF2725FD9DE4DD02BFB1
-:10CEA000DEC648EA97C9BCE787837CF7D27ADC49BB
-:10CEB0008B915F7535ADC78379F079B1068DD67BDF
-:10CEC000D2E1BB278B979F6C1F4CF38893F470B211
-:10CED000F42F6F8CE5F54E1E32BAD0E7074D46BFF2
-:10CEE000250AE5021FDA1C6BD636DEEED48B91AE36
-:10CEF000305E5E767FEDEBF85E7657FD2C4A6BD6A2
-:10CF0000DCC878FDCEBBDE4FF5E45C898FB23ADE3B
-:10CF10002A088F77BADCF5C0EF232E4F23D6BB3C0F
-:10CF2000A77309E37475DED2F1183332F6EE50CFF1
-:10CF30002A7CEF7EE1933DF8CEF194553A8A2FC3D7
-:10CF4000C4E904F4DB399AE87AB9A4DFF45CCF1DB4
-:10CF5000E88FC3B19C65301691D361C13CD89AC1AA
-:10CF6000DF8A4E3E6FDF7D50E3E3D486B737506AE9
-:10CF7000F48D463F67347F94964170F460FF9D7551
-:10CF8000F8A3800F8F81E7397E6AF7EAD7853F13D0
-:10CF90009F572DFE87B7AB6D33BA6DD83FCC67C1B5
-:10CFA000FC6B9925503F4DEC43D001EF6727ED57BF
-:10CFB000FB07E53FE478A8796264DEBD1C3FB5312C
-:10CFC000877E3291EAF1766ABF18AFCCABF55C3957
-:10CFD0001FB1BEB3721F9CE55FCCA09F7D6182FE36
-:10CFE00099A08FF34F2449FA11747BFE89113ECC2E
-:10CFF000275EEE9BF39AD7108E763F62AEDD7C5EA5
-:10D00000CCD53666F628CCBE6DCC9C48C6B64ABE9A
-:10D01000563BA86D0CF895E25FCCDA367A362F676E
-:10D02000D96DA3E78C0AF03F56DA9645DF7D6D593E
-:10D03000687FD0C0AA014F359F9AA79277103CAC69
-:10D0400062BFD63C7535C1478DD3023E027E0C7E51
-:10D050001175E5BA5F766962FF478E49005F1B086C
-:10D06000FFD9898372C04ACE2FB0DCEEE6FD8ED8A0
-:10D0700066D1F5A3EA8DF4E9BFFF0AFD737A1B16AA
-:10D0800082CF21C69E57C2F87CD9CF389CD895E371
-:10D09000BD29DB3DF9641FFE8C029F8C3915DD38FC
-:10D0A000094E024F7FB0283CAD4EE6FCBA1630491F
-:10D0B0000FC0EB60AE271972E53CF29037313CCFE0
-:10D0C000D306097F9557700FA5BFBBFEB024B99357
-:10D0D000B7FF6F9781E6150AD7B51C7E286F31B36D
-:10D0E000DB4B79FBCF9B4F649C3607D6F371B3DBE8
-:10D0F000CD454D5F7EC9B65C2BF6DDD2EDB9D64588
-:10D1000041706FD99B7FC2C9F17A76AF0923B116FE
-:10D1100093EF2713E2F0DDD8E665546E75F3FA67F6
-:10D12000ED47DE44BD25DB63F28CCE40FBA5DB4A38
-:10D13000DC5541F0BF7AAF1E1FA3DAF4F96B0EE99C
-:10D14000F3E65C46F4F08FB6CBF5EBF3F927F4F990
-:10D150004FDE597D33B6C1F3E3C4BEF9D417E9B34A
-:10D1600072B856BF3FE304E4E8A7079F8F02BE6A88
-:10D17000FF54753C99611D7A3AE578D44C7CBDDE4C
-:10D180003D1AD1CB325FE8FE957CE38A7DBD96F0F7
-:10D19000859D154C37A1F83DC3DA6E7673FAAA6BFC
-:10D1A0007A3B037A4CF52C4EC890DF6D9B2DCC7EDC
-:10D1B000E57803F10F66773B19A7BF8A71A26C422D
-:10D1C000D374768AF7C736FD7606F66BC58F35D2EF
-:10D1D000372A9E1DF12AE8A66BFF82EB29BD79262E
-:10D1E000C1A192B92DE0874BDB357F24CF3BC639F7
-:10D1F0000F75F2768B7D9A0BF35EB42E2CC0CFF8B0
-:10D20000BF559B42E6B125A89CCF7FE9A157BED26E
-:10D2100078FFD5DBF5ED967178417ED4ECFA7B583A
-:10D22000F077AE0811BC26B4EF3062DD8BE5FC95DB
-:10D23000FC63DEC90CEB9B209AB0D3F80F971B96CA
-:10D24000619EE2DCC2801C9CB045B4E78CAF02EB6F
-:10D25000AEB75B9C5877BD95F923F87C4E445ADCF9
-:10D260000EFEFDE2B648D21F968431AF358F52666E
-:10D27000CB433B5734DA7DFC9691F4A47ACE7BA85D
-:10D280009FC7355F0BFA316A22FF33915FC6FCB44A
-:10D290001ED08D3B789D3E7D9EB50E22BDA4CEE472
-:10D2A0007F0570A9619D046FC6F1E95670E470AB0B
-:10D2B000E3EB7C2F16FA97BEFD72D646F5971FFA60
-:10D2C0007B58F077AE67322BAFBF3D9CA7347F1FF2
-:10D2D000C1D168616E039FA7F1CE709F97F490D281
-:10D2E00070D0A959EACB5BEE716761DEEB357796BA
-:10D2F000037C6CB3CD053EB6708790435B62B8FE8D
-:10D300001A477A33B55F087D0A7ACA02C1EFB6C4FC
-:10D31000B4F9C1F7B73C9826F4A9BF19092E3DF717
-:10D32000D97C3B35E8D342EFD9B27904B507BF24A5
-:10D330007DEABE48D17EB680EB96C10E9F97E7FF8F
-:10D3400088292641CF766759A91DD7D3D202724AC0
-:10D35000E9D33F1BE6B90BF856EB55FA37ABFE762F
-:10D36000FAE66E293F7B36F379F2FE4F6BA5C70DC7
-:10D3700041FAF003B982FF8F99E6DE23EBB950AF93
-:10D38000CA30FBDE297CBE555B0DCE96B400DC991D
-:10D39000DB9D05389FDE6CCB039D8D99C6E83C7103
-:10D3A0003257F0F38802E6F6F174BBEC777BAE41BE
-:10D3B00097268673FAE3FD9C2EF19B81DFC882528B
-:10D3C0000BE42197E1C4CF43D7B13757C8CD2A4BDF
-:10D3D000E96F26F5339F3E3A28167ACBE915DA4EE7
-:10D3E000312F81E731FF6E73B5D0BAC5FC14DC393B
-:10D3F000DD1492BC977C2BA68F4E7C4FD8386A37B1
-:10D400002B7D1AF8D7747442F0DC72DF28C2E34235
-:10D410008967769F4DD209637F45798993CABFE9B1
-:10D42000BCA5D6C9E980CA39BEFDC077E8794BE111
-:10D430009B997C85A59103E37BD1B898311A077538
-:10D44000B28979C3385C20F3082EF7987C77F1F91C
-:10D450000C3509F8A798047D71EEEC0DCFA3FA6E98
-:10D460000BCF573CB094B979FD8A64E6D2447D165F
-:10D470008DFABC1B234F2133D0AE225AF45B91C0EE
-:10D480007C7749BD1FFC2A13693AF5EB36C48AF64E
-:10D490005179D4DE6B10EDDD269E0ECB10FBA56717
-:10D4A0007D18ED9F8ABB53B24007B3A6E9E9203F40
-:10D4B0004FD08D4A1FCF734A39E34AC4FE5EB46E23
-:10D4C00024C98D165B69FD73C0D7D311A40F566CA8
-:10D4D000B8ED8642CCEF9941D070D8E737EE1F0304
-:10D4E0007A5BB46EC1F77E8FF3C85E1B7D6FCFF39E
-:10D4F0009CCF85BEAD39CB9FE31F16CD3B6A49E477
-:10D50000ED3D6DB3CFBDC8D31BBDFBDF845E70E3C3
-:10D510004D46AA7F236BFBCB1FC117D689716EF0D6
-:10D520005E3025F2FE6E28D218CABB6C8ED4157CF4
-:10D53000FE15127F7F95FBA0C5C6E6FFD28E79A5AA
-:10D5400064A5F3EF374053ED470F1C9727F5C4A9A7
-:10D55000DA76E83DC3A68BFDA5EAA31FF43B19F0DC
-:10D56000E0F5CC122E2ACFE14AF5AB36867565443C
-:10D570002135FB47F07471C1345B1EAF372B9DCD55
-:10D58000C0B9A9E70E23DB49F3EDA9A07D1F99E5FA
-:10D59000C4BEF730E627BEE71B4974DF35B5A7EBFD
-:10D5A0006E9EEFDA31C2D5427C5D9CDF173B18C915
-:10D5B000F7AEA982AF29FE72D2D11949F42ACFF36E
-:10D5C0009592343E6A9ABE752CAF5F69B774411E5E
-:10D5D0002C7E706E9493CFB3720B3FCF7339C636E7
-:10D5E000E9CFF3FCBC9D9137F8CA7379E8F91B3495
-:10D5F000033AAADAA4111D0E6B715992888F690E35
-:10D60000ACAFCAEECF84FCAB72D95C283FDBEC7EBA
-:10D61000E034D70FCF37CFA4945DE670E7F3BC0AB0
-:10D62000C8E3FB7E6CBEC7053855B456D0793222AC
-:10D63000C743FC69B9A4BB591CCC1AF88DA933099E
-:10D64000FBB02B577E8F7564D9899E6D0C70E832C4
-:10D650003BB230AFAEF53603E4E6ACBB045DF37D20
-:10D660006635F1F6F7985838F6FBDFD09EAFB36C0D
-:10D67000ADA97407CF0FB53253642CE82A97E8FAA6
-:10D68000E7051E33E0F0E98FD838E805959B36D3DF
-:10D690007C145D305347F120E879BBD3F270BE565D
-:10D6A00074F4F38269D7E605D3C34D1AD1014F5FF5
-:10D6B000C9207A98338BE8619A3F73259F5789B1C7
-:10D6C0008EB961674864AE303EFF5ED643FA442FA0
-:10D6D000D72720CF143F517C83D381DB1A1FC0EFA3
-:10D6E0009E663E15CE93F7365B297DB2D9C14C1CA0
-:10D6F000BEFB9A1329FF4CB393D2B6E66CFAFECB6D
-:10D700006617E50F348FA3FCC16637E50F35CFA44C
-:10D71000F4C5E652FAAEF812870BF121C557143F53
-:10D7200052F4A4F852281D953BB137A83DF13DC5F0
-:10D73000EFB00E435E801F29FCA66BA5DEC434F05B
-:10D74000B1CE05E01725C6B34F3FCFE1DB5B6D7768
-:10D7500085390117C1F77AED5692F3A9167608E7D5
-:10D76000FF9615EEAEBB83E4EAADD51A3305D1EDD5
-:10D770006D8D36660AA2DBDB9B6274F9B2A6B78FA9
-:10D7800025F0FEFF9EE2F1022F27EFFCF8D1FFE427
-:10D79000DF1FBFF3F3E1C0379FC7EE8730EE9AF08B
-:10D7A000BE79C422BFCE4C726658B838270D0B170D
-:10D7B000E724FC013F8B98D8A78FDFF957DAE75DA4
-:10D7C0004D614E23F40FE08BC3F70389AF454D61E4
-:10D7D00004C78AF5A79E7E1EFB7D8D85F8DDA275A8
-:10D7E000727F6EE4700DD2DB3E4C62A49F696EC600
-:10D7F0009A38FC3EFC91C5CF653FFB50B3FA34DE4E
-:10D8000050E387A632FEDDB3F157EF41DFD69A4EE3
-:10D81000907EECB1DAFD46CCCF6B3E1BDC9FD6741C
-:10D820009CEAB1CEA1311F47D0566480634481DBAE
-:10D83000023E01DA06FE16651F61D8DFAC55730C97
-:10D84000E7EBAA92DFAB366AA47728F83F9167A48A
-:10D850007D753AD744789D863D3B981818C929456F
-:10D86000B79C6FB87DD81FADB9962541FC7891FC67
-:10D870005E996DA0547D3FCDB725FA9986CDC5FB45
-:10D88000BD373BDDB298F89DD3027EA0EA2FCACE09
-:10D89000DB905E807EA6C6B1A07DF95C9E49CECBB2
-:10D8A00021E49895CB31DEAE6E0079A0F4934FF170
-:10D8B000BFE369FE74FEAA79E6A9675E845DE2FDB6
-:10D8C00030C253CD35D2BE91E31B3397F41AB75D06
-:10D8D000E3EB6C90F82F7EEA4F519DBC7CF901611F
-:10D8E0003FE56917D28635D5642F6B70F17D827D57
-:10D8F00070C8FC6167105DBEFACCFB519D74BEF030
-:10D90000261B1291FA93194F1B0E9C9AC1D01FEB44
-:10D91000D9E0B05FD96EB97699CE996A1D2587BFD7
-:10D920008CA7F1B54BF154FFF0FAF8FEEC20CB993F
-:10D93000E9C3BEFD4B7606B7CEAEB69C6DBA60E4C9
-:10D94000F35DBE66E627A0F3D0FA9FE445C6817E6C
-:10D95000D8583696EC18266600BE575A051C7A7DB4
-:10D96000C3A3D9D7D85F966FE38DB8AAD56B72469B
-:10D97000BBF87CBB613FEFA77E4EBE90EBE7F83E65
-:10D9800062FC2CD5BDCF48E785EE7D9144FF0DFBB1
-:10D990001E383E91E71B76691896D5B30E8253C3A5
-:10D9A0000123B306CB33D877060D3CCFDAA7221B71
-:10D9B000414FCBDA34F76E3E9F5EAB337A70D07C4A
-:10D9C0006CF9829E6AC3DAC6105CE5FCFF2EF999F9
-:10D9D000AAB7ACFD010BF0C5EB9D27FDE517118C37
-:10D9E000EC66ACE74DCCF3CCF67C17EC7BCBDAF6EF
-:10D9F0003790FCDF17E118CED7F1B9B4F3AB7E0650
-:10DA0000E78BFD34385FE81D67A43DF7CC3346E271
-:10DA1000439827F6E1E7D07383E6992CE7999C2F8A
-:10DA2000F49B23D88F8581FACBDABAA23279FD4FE5
-:10DA30000EBD4DE97039CE327BC768C8CD4F0E445C
-:10DA4000CCF451FAD3192FF1F1CEB54D8DD382F626
-:10DA5000555EBE99FA3DB7DD3813F062BE4152CF34
-:10DA60006FA3F59CD997ACD1F916F0E67AFE99032D
-:10DA7000CF461968DF7A453B89478355D869C36229
-:10DA80009C52CFB4B642DF58C8B5BB68CEEFEA0FA0
-:10DA90005C20F91BFA5DD5A7FD9684F3770FD93585
-:10DAA000F89F01F45BEF10382F31E624601F945F7C
-:10DAB000E3BCE556F0B1D7CC020F439D0FE15C55B6
-:10DAC000FED620B25BAC343B1390FFE2757E10E4CF
-:10DAD000F32ECF97FB3BB1B31076CEAE3421D7EB0C
-:10DAE00036F2830A5FCF108E772F5F729DCFC83CCE
-:10DAF000F9013FD1FCFC745ADF23D506B785FC2C15
-:10DB0000FE2CD83D4F5A9897FC46BFB4097F40BAC7
-:10DB1000B0EB3F22FD4575B1FEAC41B07F493CD62C
-:10DB2000CDE1E541F8ACDBE9CF82FE72D622EC7C98
-:10DB3000287720CD13F55A24DDA01FF4DB95E638B5
-:10DB40004F7AE673910CFABEE1F9486157F8B96D66
-:10DB5000675890DCAC9674C575262FD6EFDD2DE6A0
-:10DB60008779417F5E6669CD827EA9C65D16D54AFA
-:10DB7000E39D95E32D0B6F15FE098BB047A23E8DFB
-:10DB80006F66E447E979228CF4D4CF933A0E62FCB5
-:10DB9000CF9F18C920C7BBD27C4B0E5139D7DF3875
-:10DBA0003E6A9E0CF363BE9F3D11E963BCFE67664F
-:10DBB000A10F7D16194FFAD089C8ADE5E497D915A4
-:10DBC000A6C1AEF299C62C8928DF2DFC1835CD4DA3
-:10DBD000E47FA8E1DB9DE5513A93C5A27C24D95BA3
-:10DBE0003EFB35DFA71A7DDF88EF1ED65AFE03EC19
-:10DBF000BBBD116477FBFCC9FF1ED99FDFA26697EE
-:10DC0000DEBEA4E84095DF23F9D23D128EF7E53B56
-:10DC100008FFF5116D5BD3699D62BF723CD0B98B73
-:10DC2000EF8F78D8BB4FB6BD10AFD901677FD64F05
-:10DC300001F7BDE27CF3F93E33F95D6A9E8F749380
-:10DC40001DE7EEB106C88B1AA3D0836B0C1C7C3C7D
-:10DC5000D5EEDC9B053DBBE5095B1EE0C1E14DE770
-:10DC6000C89EDD46398E18F7B33D29C2AEEF97F94D
-:10DC700083A3C8AE3F2B96DD3E87F49CEDA301D76E
-:10DC80008BBB220CA00B3E8E5BE3F0A9F9C10F0504
-:10DC90003CA397905ECEF71FF1CB3AC92FEBEF9ED6
-:10DCA000183D11FBE92D23835E70D1E44A003F0C3F
-:10DCB00085D70792AFD41E7CD402BF5D1DDF371E0F
-:10DCC000BE6F6AA57FACF6498DF4BADA0D131F2238
-:10DCD0003EF8A6990DE7F338DBF64054303E8E4B04
-:10DCE0007E1668EFA2FAB5BCBE68FF5A14CD678FE6
-:10DCF000D985F984E2F15BB77FD2F8ADDAF7D14785
-:10DD00001B97EBA3AF5CF745D6F1FDF7C14FF6D9F2
-:10DD1000C87EC5F19E0ABDE38CB96D09D67DE66962
-:10DD20001BF199333162BF7FC2F9A17704E6F19DFF
-:10DD3000FBC9BEF1BBB90CF260A94FDFAF1AF735D2
-:10DD4000C97FEB07B9A26127ABE778407F1C2FDFC3
-:10DD5000A5F66F99A97DE83A9E44BBC2A0FDF9746F
-:10DD600004D1CB9921021F679E194172A52B46D081
-:10DD7000399F6F2ACE2B676244CAA08C703AA89153
-:10DD8000E7D13353DBE8FC7D46DB4F699759B4ABF1
-:10DD900069927E634E7789A01BD024FC61D64D1D0D
-:10DDA000D02760AF1E9347A93F2CF64ABB33E81338
-:10DDB0007228A340C82F86F1E2A5FF83F494360BA6
-:10DDC000F8B247EA7175FBAEF4C301BF75FB34F2DC
-:10DDD0002319543F7CD671CA5ECEE9B1D6ABB96D7A
-:10DDE00098CFBA15CBC88FD4B8F956D0BB5A47AD27
-:10DDF00089CDC479A84B33D27CBA6C7CDF000EC1CC
-:10DE0000E305E95D91817198239EF44C52AE630A5B
-:10DE100084BC42BE95F757B74EDB44E3A4A973A573
-:10DE2000589F8213078B05F6327EDE17E503AC5F41
-:10DE3000CD3374FD6A3EC30B849DA22BCD797F1137
-:10DE4000F0FD86D18573FAC5CBF9D1B15FA397E117
-:10DE5000E4D66737E6F3CF034DF1F97F29F95B2D5F
-:10DE6000ECD27C9E59DBF5FE90EC5DFAFC55FBF4A0
-:10DE7000F99C03FAFCE8767DDEF5AA3E3F448EABC2
-:10DE8000E08473AF738438F722C5B9D71926CEBDA5
-:10DE9000C8E3DC8B14E75E7CC7B917799C7B91C71C
-:10DEA000B917799C7B91E2DC8BEF9505827FD7498E
-:10DEB000BB23F000BF0C7BC1A6FCECB45FBA17C457
-:10DEC00013FF547ED2EE653994EFB3EBCCB6925D7E
-:10DED000876C375C2F993BD473434121FCA71D1BF2
-:10DEE0009280375327D97397BF28ECB97579363BA1
-:10DEF000EC0C9DEB3FD900F5296BA8670EEA779BE8
-:10DF00007BF6101D98FCC4373AD73ADF9A22F047C7
-:10DF1000F60E668FA5F34905E45DECC0780CF5AB11
-:10DF2000B04D7A3F4AA85F25D49F124A07CA8FF2A4
-:10DF3000B8B92709FCFED413D64D98FF2969276389
-:10DF4000F3ADA47F29BDBAC4682738ADBC4FDB0947
-:10DF500039B5AA2096DAF79EE0FA763FF256A595F3
-:10DF600097F2855EADF29B3403F9693C6E9243AB48
-:10DF7000E49C52B59EAEBB4123910692E317ED0699
-:10DF80003A175C7CC7487AC4886D06DD7A46FAC2C7
-:10DF900075F475F5DED8107FE0105DFD6B0EA5877A
-:10DFA000F803AFD2FBA96E5AFB0ACED77337E5EB65
-:10DFB000EA55954E0C81A39CB7D44B5BD66C4B05B0
-:10DFC000FF5915D94BF35FF59C8DEE5D5471F9E265
-:10DFD000E6EBAE4686F3C76AABFB46C0AFBACD1CD4
-:10DFE00003BB56A5943FAC492F8FAB4DCCEB880DAE
-:10DFF000D05DB583B96378FB73B9AD7B0C1C6FE75B
-:10E000000CDBB71639E15FDA91EAE074B55A6B8B35
-:10E010001FCFFB3B15E3D951C0F773AAD9FF933249
-:10E02000F0CBFD196C2DAF776AD3B351A4774B3A7F
-:10E030004B353BC281EF1DAD463A17C03E057B9084
-:10E04000A2871DAD83C233ED817506F07F99D6C7D7
-:10E05000F142F7467AED4786AE821ED726D65B3D63
-:10E0600055F3929E2CD7B352CA15B64EF4B35AE666
-:10E070004FCBF3825ADFD991AF8C76C2AFD97C28CF
-:10E08000D5083E6ED8B72709FA4582A71DFBA77AA7
-:10E09000C7F0FF2CE2E3D6FCDEC8E047FE68CBF415
-:10E0A000A8F1D03F9F36BB66F1FCDDAD3FB3E05C2D
-:10E0B0005063F25970EEAC7E628705FEFF6BF7EE9F
-:10E0C000A0EF4BF656D0797B296BA473E4A76621A9
-:10E0D000A7153CAAA769DB1D7CDE998582BF568700
-:10E0E0008BFB2025C6A2637158EF5E2D17EBBDA9EF
-:10E0F00074BFA5827F7F57F2E1D0FDD1FBFADC929D
-:10E10000C1B02BB5093FE840FB619E7F24ED87B984
-:10E1100097D228BDE9D2D574AEFA3D2B1D457C229D
-:10E1200027E43CFBBA51D8CDDAC53EA8B6F8E3E601
-:10E13000629FBC6CA67D526F82ED1BE764C626F021
-:10E14000B4B4C8A8A3D7E5C5113A7A9ECF62757E4C
-:10E15000E59BD9105DFEA65919BAFAB7DC747508AB
-:10E16000FDE705CA898F4CD0DD5FA95FE3756A645E
-:10E17000479BA6FFCED3354467D7EBDAD7B33981B7
-:10E180007A3807EFFA2DC199B10E0BCE5BD5067127
-:10E190005F67BEA74B7EEFA4EF7C21BA7D382CC30E
-:10E1A000F59F422E9AC93EAFECD3F3F1FF19FDC99A
-:10E1B000458E68396EB451D8173C7ABDA383CE9F83
-:10E1C0004CE0A15EDA7BEAB385BDA7DEDB6169B412
-:10E1D00013FC4DC91C240DAD1AD9F3787D6B72ACBC
-:10E1E000C8AFC1F703E6809D8589FE2EA1FC84B1EE
-:10E1F00002FB25B4BC81AF1B7A4603EC3564679AF9
-:10E20000F909D999D438B27F45A74BB7E9ED470D45
-:10E21000B0EB04E17359A193E8B566EFFEE3433830
-:10E220007CE696C6E4621FD5B5CD3657E45C496FEF
-:10E230008ACF5FAC3690DFBBF7F5A3446FBDD52620
-:10E24000A2EB6F824B835BD83543E970095F9795EA
-:10E250008FBFE480E6F269A21EE03304F419029F46
-:10E26000E47EE0A6E0D507BF90F2A5F89F02DC2788
-:10E27000D07CFEB4FEE012024F354E08BCD8383DCB
-:10E280003C96789C6F81FF2C396164BE6FB1FEA50E
-:10E290005827E6C1D78979CCB924EC26CA9F70F3F8
-:10E2A0002513E5FBE8A694C32B0FFB4EBF4FFBE8FD
-:10E2B000A854EC9B7997E2A9DDBF8A9EBE898ED4D3
-:10E2C000FC15DF0EECA3BB486E2C2F8C8CFB98B397
-:10E2D0000AFEFF85C417247F1D582FF50A3EEAD198
-:10E2E000CB9961778EA37B47BDF674D22BFAE4906D
-:10E2F000435FBE32323D01E51E69B753FCD823EBC4
-:10E30000A9712A78B97310E87A683CECB11BD6651C
-:10E31000A47606E92B9EF5E678D80B53D70EA2B467
-:10E32000C2E688871CA9586B2C857CFCF09E84F87B
-:10E3300071B0CFAF37C7CDE25D7F7847412A1B85EB
-:10E340007C09A5A73687CD0FB673AB745BA1D0430C
-:10E35000EBEF7C8FE4DA39C3EB51F3B1EFD63F1723
-:10E3600085AB37B5EBDF1EE3E02AC9DD319E870AB6
-:10E37000C98FBA638F037073EC180D3BF5CF6143FF
-:10E380001B1CD01F6AD69724C02E56F7B7A38F4107
-:10E39000EE7BD69AE3A17F7EF60E978B1AC935D213
-:10E3A0001B3EB5313A2F7DBA3BC207FFFDA71A735A
-:10E3B000C3BFB3CCF8CA68874ECEB6DF8C79EC4DBC
-:10E3C000F0FCBCB010E3FBF624627C9797EE677A12
-:10E3D000D60E8FEECF8EA2D2E5DB845EB747D97121
-:10E3E000A5BD17FA3CF2D0E7D908A1CF230F7D1EB7
-:10E3F00029F4797C3F26EDF8C35A7A72711EF54EE6
-:10E4000063D98D2477EDD9D0D75769E12ED2333532
-:10E410005702EC63EC9D18216F43F0ABD2493D5C91
-:10E42000E70AA2FB2997AC2CF89ED95416A3CB4F30
-:10E43000B726E9EA9738D274E5D7268ED4955FE7F8
-:10E44000CCD5E5BF933D5E57FF06D7545DFEBBE3D9
-:10E45000AED3D59FED9EADCBCF9DB940577F5E69C2
-:10E4600085AEFC96F9CB74E50B3C2B74F95BABEFF6
-:10E47000D0D5BFAD71ADAEDCCD1C26C8BD769CB38A
-:10E4800038DC5FC6398BA7ABDE186E0FC66BD17454
-:10E4900043637F76FAF3521F9A38D6FD19E823C5F5
-:10E4A00020E890A76EA81097A55C49667E4D9C73E6
-:10E4B0003B924037A1F542CB8B228E5C74721C2EAE
-:10E4C00039187BAB89F391A2B147F23378FE9931C9
-:10E4D0000B447EE29167D379FEE0C1ADB79A38FF75
-:10E4E00028BAE6C845948F1E5B2EF27319A91C4703
-:10E4F000C6FC6DA197AFA3684AFA2697B093F47B48
-:10E500004F53A58003EE37020E48FD9C3E911EE15D
-:10E51000F489F4554E9F5566C68E73FA447A829FED
-:10E5200037F1FD37FCBC89F4757EDE44FA263F6F77
-:10E5300022EDE0E74DA4BF6B9E4FE93BCD1E6AF78D
-:10E540006E7335A5EF3537D2F73F363751FA41B301
-:10E5500097BE278E5176053FD95F949FA901FE3D56
-:10E56000D8E70E99CF06FB61959F50F9055B1A59C4
-:10E570006704F669A729E6636BC0DF37309F35B1C2
-:10E580008F83F4B0CD89EE8C3134FE5007F97BE4F3
-:10E59000F769DADC14B8FE6E1DED193986E37B5E8F
-:10E5A0005EE5FA68CE3FA65C6E34835E7E2FEFA9EF
-:10E5B00086F67F59D249DC58F768B49B6C15F7F0A2
-:10E5C000265BC53DBBC9A6CE16F0A3962F9913F7BF
-:10E5D000685E89B4107F6AB9C7E4839D52FB82519B
-:10E5E0007E521CA37CCB971D742F6FB2C39548F24B
-:10E5F00046E6FBFCE7F80BBA2FA3FCD9EA9E4CF1E8
-:10E60000179DD3A1074CB25B9C6121FE77F8AD5FEB
-:10E61000897C57CD87613CE527DFF525F31B46074D
-:10E62000FCE193AD1D69B0134C5A6D7505DFFF51C8
-:10E630007E6FED8B0E23E489BAE7A3C651F38D34C8
-:10E64000F1FEF202F778263BDA7271AFA1A5DE4E39
-:10E65000FD25F0EF963CAAE73652BBB65CD8812781
-:10E66000D5D95DB06F2B7F7B825C37AF47EB2CFE3B
-:10E67000C243F70D26C9FB06E8C72ACABDE86752A0
-:10E680009C3FC984F5375A5CB0873EAAF1F6790100
-:10E69000FF3FEA4704ED5FCC13FD66FE85CF177A96
-:10E6A000BBDB4DF09DABCE6F4E9997F29959A79178
-:10E6B000FDCA28F3BF1DED590EBC978639FE1441E3
-:10E6C000FB3C2305768ED9526FFF1A7A59FD3F43E2
-:10E6D0002F6E81EFA18CEC69A174A3F0A2F03C1025
-:10E6E0001D29BC07DDD7223CF7DDBF92FD84D2D7C0
-:10E6F0004074A5E869B255E01D78C53D1A4547DA72
-:10E70000176D3B681D755692738A8E42E9E04A3A4E
-:10E710001274D9F23D2BF577251D05F00F78FCF327
-:10E7200074D46184DCFD47E9E7F61E36239A17DDD1
-:10E730007B8DE732E446C525E771E42BD9D4192057
-:10E740002955FE00CA075F591E4A5FAAFE8B03F4D3
-:10E75000E7F9A2C71C1D449793A40CFCC300F55F06
-:10E7600093F7E25FB3A9FB1E6E7B2EA783E9920F9E
-:10E77000AF2A11F43533CD48FE8CE9394B49BF67D8
-:10E7800076A11F3BF93F646F93FEF5EB65BB1997CC
-:10E790004BD7619C19717AFDFB7AA977CF0CF1B741
-:10E7A0005F9F732DE9E1D787E8D9EF8D917A741ACD
-:10E7B0004B13E7EB4DA4FF16CBFD982CF19DE134F4
-:10E7C000B2220EF712E6314108BC7ADEE2467FD76C
-:10E7D000322FE5AF633E4ABFC3FCA407DCC0050689
-:10E7E000F2DF658CEE8F1E8DB8B16C39EF6F7AFE5B
-:10E7F000F44C7CAFB3F6A45A0CB81DE8F90CF2A1A6
-:10E80000C1E8F933F4CC73299E11381F1F29769281
-:10E810001E76C49A417A21F69339C85EF96B2E4769
-:10E8200033B99C3BCAE52CD2635CCE667279F72B78
-:10E830002E6791BF3E7B2D43BB194EFDFD1ED5FEBD
-:10E840003B8EE9CC34686039F69DD12F0C851DEBE9
-:10E85000B59811C5C0DB6B31638BB1DED762120C8A
-:10E86000220DB3503AEAF9CCFEF45645AF81F16679
-:10E87000D078A1F055F00C85A382EF3F01CF416322
-:10E880000BAF84E765E8F7B09F5ADF8E4A4C879F4D
-:10E8900051C6D345083E58FFFCA804ACA3CE2AE0DD
-:10E8A00032A96922A5939BC633533EF999BC80EFE8
-:10E8B0006758020CCE217636669A46F9EF49DACAD5
-:10E8C0004EF00CC73CCEE6F9B3B846C63ED9DE12D0
-:10E8D00085FB99E79E31BA70AEA9333A37B9602704
-:10E8E0007FCD28E2822E1F4D857F93EDEAFFBE7417
-:10E8F0009D55C1CF4B70FDD9356EDA6F0CDED9F85E
-:10E90000805E33344CDC3326F742DEC07ACE98701A
-:10E91000C167868609FEA8F0C5DB09B9CBFB19C320
-:10E92000F95AF2FDE174AE2918E62EC27AF879811F
-:10E93000E28A7AB323C85EF11B199738D97F35C5AF
-:10E94000E5CDC4B99D7F378647EDC4BEFF8D8C4BA6
-:10E95000FCC520CFB5687F6D5A5E22E0318509BFC6
-:10E96000CA7556B3CBCFE774DD58B90F47B3D13270
-:10E97000AE4777FE507692DE3823C9A1C92CEB2131
-:10E98000D8098A4F98C94ED077DF2D51F8457B4F73
-:10E990005C3482AF94446A6C505A203E272CD1C01C
-:10E9A0009C417ABBCD19CE9C41FB23223B56978FCD
-:10E9B000740DD1D58F1E97AE2B8F715FA52B1F3491
-:10E9C000334F971F5C3A41573F61FE345D3EC97338
-:10E9D000BDAE7E72F51C5D5EF1BD64F189A5342E7D
-:10E9E000D4B51FD6B448573FCD5BA32B5778605E94
-:10E9F0007747763CF8A2F8CBD8B85257EFA7512208
-:10EA0000DE64A67DC92CECF7E1AD3FD0CFCBF8BAE0
-:10EA100046F1A34EC16FBDFC1FD05149A29EFF4ECF
-:10EA200077E8ED1AC98D265D7EC33F8A67CF553AD8
-:10EA30003C87C283E3DDE5477D2EBFBD3C5FF2EB43
-:10EA40004A13F40BF82F82E70FFF45F07AE1BF0875
-:10EA5000CEC37F115C1FFE8BE072F82F82CBF34F89
-:10EA6000E8F15CD8A1C7F3D8F7F47856F437103E34
-:10EA7000C677EAE920141F133F0DA10B8987F9FC23
-:10EA80009FFEF04047114EFFD31B19D9E7BE092F57
-:10EA90002F84E065D2484F3BF6EBFC4117532DC065
-:10EAA000538F6704CE939F493B49E83D4E2F57074C
-:10EAB000280EE107468ABF396968D5C097FD299EAF
-:10EAC000636379FDDB731A897E1259E9FE257C3E6A
-:10EAD000E5FF11467E9CF261225E97E574529C83AD
-:10EAE000E277E5C9E21ED11B63E5F9CD25EE13758A
-:10EAF0008C15FA6CA4CB41F78E2B72441C073F7621
-:10EB0000A5968F02FDBC6E1B017AD822FC269D883B
-:10EB1000178E0BC40B43DF847E9722F5AB963F58CC
-:10EB2000AD58C7886D4C272747FAACBA7BAF57EF73
-:10EB300075E8F2A3DA1275F5AF39E4D495E7FAB3C4
-:10EB400075E5F9275CBA7C61C7385DFDB1EFB97531
-:10EB5000F9F19D3375F5277E5AAACB27B39E87011D
-:10EB6000DF619A38EF5B395FA27B604E110F547EF4
-:10EB7000778C8803957600A54FABFBD01E4977A113
-:10EB80007AFA308BD0535B9298388759E5798BE9C4
-:10EB9000F5758FBCCFACF454E6D5DF6756F798FB1C
-:10EBA000F47AA9B72BFD38E81EB33BF81E73B98C75
-:10EBB000DF0E957F71E3847D2F74FEC32C62BD2D23
-:10EBC0007758286E44CD2B743ECBF304DDEEB6F6B9
-:10EBD0001FBF933E4EA3FE8B724B878CE3F51E3313
-:10EBE000BB7C6447B9623C57A717E7CA1F595C77DB
-:10EBF00039BF79BCF26BC47ACA0C86DB67E7D07D7B
-:10EC0000B1F9BF0C1A3F6F9CA0EFF8095ABFEB2B6C
-:10EC10008F16F7B958B4C509FA1D783C01CF440BDB
-:10EC20005B477146F2DEFF6D9BDAEE1BC18BCA2C8F
-:10EC3000AD66325E309F19F4306B1AD7A772611738
-:10EC40007CF1113BD7371E6B32919D67FCB8616533
-:10EC50005C13EB8BE318C6CF1BA00FE82C38A73C46
-:10EC600039DE48E32C1C27D65762BCDC77FF9EFCBC
-:10EC7000178C49FECDE83E4C3FF44674A8D6F1AF60
-:10EC8000BA8FAFE836144EEA7CC9A4DCC994F352BB
-:10EC9000F053FB41C14FC5433857984B77DA29AE43
-:10ECA0006226EE9129FCBD3C5EF0A34D8047A1A8F1
-:10ECB000077E3450BD12634E34ECE1BDCC19EDF843
-:10ECC0001A7BEFBF304E81E03F507CD540FCE10A1B
-:10ECD000BE3040BCD540F4497FFF40DC55107F106A
-:10ECE000F77A243E7C9906F2A3DF1DA9DFC72F8C9B
-:10ECF00013F0F5C87DCCE5AB3D57CF2718ECF72DC9
-:10ED0000EB8D924F08B90A7D03DF17AF3793BEC171
-:10ED100058E956C4117DB4C54CF75B27BB9D335CE5
-:10ED2000C23F4F7A07F9BDF8D42ABC7A79CAE5FB0D
-:10ED30004EE8C153986B03FC19951BF5E54BED3379
-:10ED40003E833C5F1C722E5D2ACFAB4B43CEA54F5A
-:10ED50008D93F2D8C55CA427493F7FB5ACD3474714
-:10ED6000BE8C686977A1FDC953BA17A6E0E284BFDB
-:10ED7000263F90E7F00BCF869C5E67EAF7BE5E1FEA
-:10ED8000FC06B88F7016F7119CD8EFBD146FD57BB9
-:10ED9000C026FC94CA1F24EB9FF55EA472D4476F73
-:10EDA000E7723B46430FE9F31F85F8A17AED86A889
-:10EDB00071E86F9F99FA53F72D6AFEEA1BED08F28E
-:10EDC000277B3A8DBAFB2D57CC7FED7374FFE2EEB3
-:10EDD00018CF3BE0E3674C2E2BF0778FFD483CE2E9
-:10EDE000E46749BB4DE87CFBF4CE224DF861BD22BF
-:10EDF0006EB677A646F700381F64D837EADEC06CD7
-:10EE0000E68F43AAFC319E8DE309CECA1F53E11F52
-:10EE10004FF39CD7B2D41CCEAB743EBCA624DC19F5
-:10EE2000F0D374A6887B3F03F96BE65ECAA5FE6E3D
-:10EE3000BA3491FAB9382E4DE85DEBEE5B013ABA7F
-:10EE40006A2F33639D9D21F7DE555A29F98D77BCD2
-:10EE5000E2D3F23ED15A8DE87CA5C6D4FD22E2D39E
-:10EE60002A7FB155E64B447ED57A91EF348B776695
-:10EE7000F6487B03D68914EBC1B9789FB447601D6F
-:10EE800048B10E7C075F421E7C0979F025E4C197EA
-:10EE900090822FE1FB22569A9A6B147EA5E2A07D08
-:10EEA00003BF527190DE03BF52701E7EA5E0FAF0E0
-:10EEB0002B0597C3AF145C0EBF52701E7EA5E0FAFF
-:10EEC000F02B05E7D9B8EB0279F031F76C5D7E2EB7
-:10EED000D7BF8B83F62DFC4AC1FDC3AFA4EBCFB3E4
-:10EEE00042D7FE56D6A46B0FBF5270FDDB9B349DFC
-:10EEF000DFE976F91E40E5B641441F2F8D2E758D52
-:10EF0000E7FBF5CF117FFB9E19E70063FB32D0EDE5
-:10EF1000CAFA7097C073EB4C8177031378EE5940AF
-:10EF2000785E6311F91271FFB83FFF4DB159F86F68
-:10EF300090C27F8314FE1BA4F0DF140F17FE1BA4E6
-:10EF4000F0DFE03BFC3748E1BF410AFF0D52F86FAC
-:10EF500090C27F8314FE1BB483FF0629FC37F80E92
-:10EF6000FF0D52F86FF0FD24FC4841EF66404FCF93
-:10EF7000D49DEB381DEACE750E5D1E7A7A707DE861
-:10EF8000E9C1E5D0D383CBA1A707E7A1A707D7871E
-:10EF90009E1E9C5F3DCE49FC12FA7A703BE8EBC1A5
-:10EFA000F951ADDE63B01DDDB0FDFCAB483B23B5D0
-:10EFB000C734CE0A56BC70A00C7EB64E9B961AC3C0
-:10EFC00039A5597BB1AC98E73DF21EDF68D66300E6
-:10EFD000BEC9CFCEF1E6F133BA773CEAAB242A576B
-:10EFE0007E5DFAE378CF3DC048EF3F26E33D557B99
-:10EFF00017731891AAFA817CFFF542C757F5885F0D
-:10F0000006CD831F0C7371CF24778D3D0FF7E5F785
-:10F01000183471DFF42E71DF3794AE764BBEB4C76F
-:10F02000B0FF4838EE0F55682EC4316499D8097383
-:10F030001EE0D49807FDE0BEF131725D8D1370FFC4
-:10F0400048CD5BD901399FA0F8B5A21E66A9E2E3BD
-:10F050004CFA82591683BF5B845E8076382F5EED52
-:10F06000D5DC3B83E8FBA1F142BE79BC2B2654F1F1
-:10F07000EF57EF6B9C80B8B859E1A2DDCF1F8F220C
-:10F0800038DEB84EDB89F8C3A27DCC8D78579F9CC3
-:10F09000F7D5FB1C962A1AD741F174AADF8AEDA98D
-:10F0A00014FF57C13A8B115FC10A3406FFA8821BB7
-:10F0B0005FDFAB585F16DF2A66D23F455C4EB88CE7
-:10F0C000CB51F1386131A555905B2A2E6752414CE6
-:10F0D00009EEC5B176E64218F00D0515EB07F3FE13
-:10F0E0003D3EB70BF78A267DD1788CF2BB4A294F7B
-:10F0F000643086C621B936C2ABD1FB1A377A77188D
-:10F10000E29C88D75D6B8E47FD7DCC0575878B1A99
-:10F110008A3B55F3CB611D069B06BCB3A38382E8F3
-:10F120008873809B80F75C9799DEDF986D7298C139
-:10F130003742E5F895F71643F48490FB252D6BDEF6
-:10F140004B35A6E37E89C1E507DF7A2E82F405A55B
-:10F15000EF54C8FB6617D71D1B7C0B2FAFD82FF4BD
-:10F1600003CF368DF89FBA6F529FE14B35405F1841
-:10F17000B26374AC51C87FF0C533DE676FC616AD9D
-:10F18000587F8CE2222AD617468BB828E187A892AE
-:10F1900070AA92F78A588E231E7AE6879CEFB847AA
-:10F1A000D0BDC4688A2B6C15FA9CB2B7287D50BDBF
-:10F1B0001F53F146FE71E0BDE251F92ECBC60A8A1B
-:10F1C000BF0ABDE7532BF5BD65EBCC747F6859884A
-:10F1D0003E582BEF0BD586E883E7C687E883F2FC21
-:10F1E000A2EEF356BC71741EE92B8D66F2CB95AD81
-:10F1F00015FA0BDBCF7C8867285B3BDD807743CA41
-:10F200009E73BBB47EE8E42DA9C7CCEAB4115CE7D9
-:10F210005C4AA6F4E64B4994DE7249DCA344EC0B4D
-:10F22000E8A0F305467AF4DB526F99877B9588470F
-:10F23000F486C9FB938CF4A65CE62801FFB8CAAD3E
-:10F240001D85DA37CBEC598F7B9BB376308A3FBA7A
-:10F2500001FA0DE2BFA0EFC0EE5E90564271183386
-:10F26000358A67B9A16085A46F4EEF0CF4EE95F472
-:10F270005B4AF93EB920E9DCE3ED3201EE3778353F
-:10F280000BDEE1F3C873ACA2E3507A2F8F90F62720
-:10F29000BBB02FF5D99F30593C6AE38DBE0DF75BAB
-:10F2A000CB61B31BC204E239CC237344F98817A3A2
-:10F2B0006F5B8743CDFFA35DA2CC6010F14E5CDF96
-:10F2C000025FBD6D75AE6551107FF962E2B419132E
-:10F2D0000B03785F1412A7B7F29EE1095F172F5A4C
-:10F2E000C9E18C7D521EDDF93D4EA1ECDA09CC5D01
-:10F2F000CCCFAC0B18538FF7F8712F70A1CCAF7E29
-:10F3000071DC9F36DA093E949F3E21F5362FF15588
-:10F31000C1B76E05DF32825F79A64E207ED53903F4
-:10F32000F888C8E991EF1048B9146287583DC1299F
-:10F33000D61B628FA8CC11FC9C999CA9B7525CB0DB
-:10F3400093EC796AFE1F9AF5719A7D7E9109529E1F
-:10F3500034FF6BE21BFE2BC3731BD6B7D520E2E64E
-:10F3600087185B99B40BD1FE57FC83C9772402F848
-:10F37000E77A1AF9D1354730FE3D1B3511A73E809B
-:10F38000FD8665F73CBC1BF6BB660B439CEBE35963
-:10F39000828E1EFF8185F4F0324BC731BC93A5E00D
-:10F3A000F87ED3BF9BC92ECFFCC3F1FED7C2469BCC
-:10F3B0000BFCF98B89A5AB30EF881C17E16306DFE6
-:10F3C00066E8FF644AE9F7095F9B5E790C71FBCB45
-:10F3D000DBD3288EB4E250EE06BC27F2C544CF0F33
-:10F3E00027C08F6B775820C71BD6C5905C2B4F90DA
-:10F3F000719DAC87FC540AFE0F4C10F6ABEB8A04EF
-:10F400001D77CBF30818E66C5D3D798F3B649F2830
-:10F41000BB60A87D21F41D8781F68FB223C06E608A
-:10F4200009B22B2ABB8439FBC30590A365167DFC6A
-:10F43000A14A5F557637791E5CDC27C77266244087
-:10F440006FDEAC3920C7AAECCE5BC6F37CD509339E
-:10F450006E60B259B14EF17EC73DE2FD8E457CBF74
-:10F4600082DF94C9FB5855DBC6D37EABF2F1347F03
-:10F47000E07D79EBE6A3292F807EFC6E8ACBAF720C
-:10F48000B82DB141FBBEB255D3C5F5ABFC8109C265
-:10F490000E57C6D574C0EFB6D56916BCA153C6D5F4
-:10F4A0000BDCEF7B7582531757CDEBD1BD8659E945
-:10F4B000ECB8783F89CF3B4D8C9717D4FFA256FD0F
-:10F4C000FB04BC3EE9452F4F8824FC5538F8BAD3DD
-:10F4D000903A689E1C0E04A79EFB787F4E1A87F018
-:10F4E00051E9F79971EE2EC37D0A9E5FE8F09931DC
-:10F4F000CEA275E2BD10CF26318E67638C6514F401
-:10F500002693C39202F8E1B01C47F3233E58C5E1AD
-:10F5100082782B1577190A9F0A39DFAAD618BD3EC3
-:10F52000D6BAD90C7C2C18E0BD821E49B78BD64DBB
-:10F53000A578F32A939BE2193C12BE1FADB0DD0BF8
-:10F54000BFC0822D0F99D370CE9E20ECCF3D72DFCD
-:10F55000CD4AF70FA7778156D85C98E702472BADC5
-:10F56000AF0FBE0F727868787FA694E0CBE9C28BAC
-:10F57000FB79555BF4F80CCC47C0B76A4B05EDB787
-:10F5800025268FC5113C8F6DAF0CC73D94057C7F40
-:10F59000E3BD23E6F0507CD3C70FDE924AEBE4F3E1
-:10F5A000A47B502EE70CBCF3C3E984E858D18B8AC6
-:10F5B000CB56E359278AB84CEBC46FDA976ED26BFF
-:10F5C0005A387E61EF1E685F5A10D8C5C7B5548996
-:10F5D000F7D742F7A9DA9F6A5FAA7DAAF6EF63E63A
-:10F5E000527FA216E0335CDE36FEB21F38CD90F3B8
-:10F5F0005D28F1CAE1FA6A701CD73513055ECBD2DB
-:10F60000F5FB1DFDA1DF948962BF974DF30F47DC29
-:10F61000A5AAAFC62D8B15ED40F7A0B7948986BE7D
-:10F62000FA2BA9BE3E1EA5B28F5FEC5B1F0F7EB109
-:10F630005F23BD77E57D4753FE0DFAECD3429F3D36
-:10F6400053B7BB21097AA3C9971AFC2E56955FF0D0
-:10F6500087C55CFF01BF5822E5747B9E276762D097
-:10F66000FEAD7AE0E92C8FE02F7EF0970F9E7EE9C9
-:10F67000F7139C01F9A9E6BF68E36FCD15F6607832
-:10F6800089F5DD9BDD4B717695768B13F7972BD73C
-:10F690005510BF6589FC5CA105F01D4A0715EB34C8
-:10F6A0007A5FACB2698CCFF83FC8972B37CDA637BD
-:10F6B00091149ED47B274A9EAAF97F57CE7FA1A49E
-:10F6C000E33913C5FE5B589D665942FB3ECD520996
-:10F6D000FA97E50BAAF4DFFBF0D4E75FCED980FD03
-:10F6E00081B8213A9F6C320B3BDFBE48D257CFAC7A
-:10F6F0007CFECD9B79BDCFB7EE48857EA2E6B154A6
-:10F70000DAF3164BBBDC12A9B7723C5504E369E986
-:10F71000E3024F95CFBCF127BCCB55962EF9D97D8E
-:10F72000229E7F51DB7EC2DB828D9BCD69BCDE8A4F
-:10F730008969BA7B32958DFCA0CBE1B970E30E33B9
-:10F74000F8C08A89026EA1F45E26EFFB2AB842EE69
-:10F7500068417E0B551FFC6F3F1F67F50A5B14EC79
-:10F76000D36A9C47245D5736C6C462BCCAC68A9F0A
-:10F77000E0DCA1F87DE8BE3B6513FB6111EF0FFBF8
-:10F78000F2D45417C535C3AFD59F5CDD2CF1F653C9
-:10F79000B378BF3139A2ED09C0217979B80BFC21CA
-:10F7A00033B393FCC6A067CCDB6210EF3D66D67521
-:10F7B0005EC03CB84A4DF75390E29D29A8D8F13C71
-:10F7C000BFD320E2AFD28D227D5EC28797FB51CEA0
-:10F7D000E23AE9DDB9BE779342E8D5C2766DC47BE3
-:10F7E000379638E66A7106E853F5A3E853D1EF403F
-:10F7F000EBFB85E423DFB4BE5369D21E91ED4A458D
-:10F800009C4AF9FD235CB0CF7CD33A2DF2FDC1BEFA
-:10F81000F572621D17DBCF7A33C5B965E0F56E2945
-:10F8200089EF67BDA1EB54FB44DD69EFF32FB40A08
-:10F83000FFC2298DCB2FDEEED40A1BDDFF52EB5227
-:10F84000F6EF6F1B87F0F6C458694FE88C841E5999
-:10F85000162EF7BF5FE4F17D76D07725F7D57B6D67
-:10F860008A3F9F6E94729175DE87FDCC9A32E87D57
-:10F870009293ADA722F15ECAA9A9627EAADD6AB3FE
-:10F88000883366911627DE3FE4E7AB934DF0FBAC7F
-:10F890004BA073E46D4D19C4176EF3C608FB83D4F7
-:10F8A000EF97483E18B1BA6203DEF95EBC2DCDA1D8
-:10F8B000F17116DB5D1F6FA3F657BBA00F466C9965
-:10F8C0006D4927BD579C03949F68B5C64A296E0CA5
-:10F8D0007C12FBCBF04A26E4CED26DE21C30CBC0CA
-:10F8E00036C24F38ACA5744612F8C4C31AC599B3D2
-:10F8F000EDFA77ACC6E6979EA7F35FC83B70ABCD39
-:10F900006DEE04F071AE6FC0DEB4D85E4A7A7BBD96
-:10F91000E49327B774D17BF40AAE57C4FF58441C54
-:10F92000704FA481EC70DF360EA84AFA9514DD28DA
-:10F93000BFD423F8CF78C0C94872ADC45846EF2968
-:10F940006DD8329DD2AACD255BBDA3107F5C1A3F36
-:10F9500081E66D263B5955FD7411AFBB332C06E78C
-:10F960009B54B33735582FADDA7137C5FF7CBAC316
-:10F9700046F13FC58ED9C53171F4DE31C5D7A97ABC
-:10F98000A94582EFD4D44FD7C5EF2CE67DE29DCDBB
-:10F990002FDB22E87E988ACBA94BF024150D16F1B7
-:10F9A00039E39D222E2789EA3BFBB58BABF4E36656
-:10F9B00011E711146F74E302DEBEAEFED928F453D2
-:10F9C000FBE0DB631C06B2430D47FF7DF146DB44E1
-:10F9D000BC51963C2FCD8A2DBD7901E0FF6B23C130
-:10F9E0007FA0F1AA0F693A3FDE6DBE68D25B3D7E13
-:10F9F00066811FD9E360A4177F6A644DD00394FE2B
-:10FA0000A2BE8F9770F934BA3515F4B16CCF43A903
-:10FA1000902F9F458A7CD99E5B7E037EE5D9152673
-:10FA2000F47313237DB8D22BF46B561DABDE23B5D4
-:10FA300095733A9A5E1421DE3DDAA68F3757EFDCD4
-:10FA40007E6612EFF320DE08F4FEBEC9BF18F87D13
-:10FA50009FEBAF38C7A61609FA7CBFD53883EE0DE9
-:10FA6000F18D023DE4FDD66723110FADF4B512E32D
-:10FA7000076EBCFFB3F23911178CF7E9E9AD506995
-:10FA80000769907690952F986724C791FE455FEAA5
-:10FA90004C7E4B7FF8AB91FA555FFEC07E3AB7D5EE
-:10FAA000ED13FA435D5B17E90F4A1F517187B5FBF0
-:10FAB000BA489F50ED1A0E08B8D41F10DF2BB20DB4
-:10FAC000CA8EE2D632719ED628EF7D31BF7CAD2939
-:10FAD000389F57BE16CC7E82B28FF4903E786FF678
-:10FAE000EFE81C5EBF4EF6CBF3E6A0F1AA414485D9
-:10FAF000E27B861DED9DBAF35DFD81186AEFAF0FC5
-:10FB0000DF0839EF6EB09B90B6D4DB49EE6F6F34EF
-:10FB100064E39EBA5B0B77418F6B97F7B706D7BE4E
-:10FB20006B83FD2089F51CC57BBBFE14CF0F8B7842
-:10FB3000BF0978DDC5188827EA3EFC493EFA9F3C9C
-:10FB4000ACF322DED4306B53CAE1A7682992EBC82C
-:10FB5000E9CC075D0F3E22F8F3A366B691DE6D3661
-:10FB60009532D8EFFDD2BFE8FDCA40EFCFB66BFEAD
-:10FB70009F05EB5787247D9686093FE3CED19E4DA6
-:10FB800098C77735F3A85CBA77681C8EFEBBA51FB3
-:10FB900052E9A9D3247F4E91E72BCB90443BE85800
-:10FBA000DDB7D3DC6E8AF7BC2BE74825E4F38F7B07
-:10FBB000AC142F30AD279CF4D6942133499EA977FD
-:10FBC000DB35A78995F1FA47720C7EC4C5FD9859BB
-:10FBD000C5BD006B887E6BB0D1FD64ADFD575F8104
-:10FBE000AF271B2F1C8DC67DD97FD3E8FDD1F2DE58
-:10FBF0008F1F7D8BE13CECCBA578E814CF1EACE7E2
-:10FC000064EFCC2E0F47DD8F1D6D569790172C7823
-:10FC10001DED777C15156B08CCAFBBE7637AD7B1C8
-:10FC2000BBC74A76DB69EDF29DC390F974273AE9C8
-:10FC30009E34AF47FA66B7DD40EFBB4D6B3F4AEFEE
-:10FC4000154E53EF195AF5EF1932674A0CECCA6496
-:10FC50004BE5CA417C8BC0DFE468FD79F1B522A198
-:10FC60002FBE56A4F5FBDEBD8A5B5172E565FB9E97
-:10FC7000DB845D4AECD3E5CACF7F299DF489DEF6AB
-:10FC80008CAF7DC7E26DE8155C5FB8708DFBEDA2AF
-:10FC9000C2805C9D27E1A4E4B38A5B9827E135CF5D
-:10FCA0006E10F009F9DD154537A17411C0BB88F756
-:10FCB00052F8643FE83886782C8EC751F733C2DF9C
-:10FCC00049C2DF57AFAFC7B30B438CEE2E4FDABF3D
-:10FCD000047FF47EF7B7C65F4728FEFCB611D02339
-:10FCE0001E34901EA1EE3B7AE47BEDEADE23CB6668
-:10FCF000C40FCA8DE1642FF4C877DA391F38063E85
-:10FD0000A0F6FFB0999DA320474FF2233AE6D769AA
-:10FD100068A3EFA993D269BF0E651D49F27E4E21FB
-:10FD2000F43763E07D6AA2FB16CDF7F012DCBF9CCE
-:10FD300067A77BEEDDBE90F7A9E53BE6DD4CF287D9
-:10FD4000F9EA1D73BE9F79BB2D0B4479DF3BE6C3F7
-:10FD5000199DA3B6E4B22CE85FEA777F067CC77CE6
-:10FD6000592CD94D1F79C43712F240BD5F3D25C5CE
-:10FD7000933869F095EF576FD54A17E07760BCA3C9
-:10FD8000C47C3B17843FB34780DB0F7BCFC9A648B9
-:10FD90007AB75BD1A9B2730FF3763D0C38A9B8DA04
-:10FDA0003F4B7A53F05771857121785074E73533A2
-:10FDB0008AC3053E1067D4F7FB316B247F51719DD8
-:10FDC0002FBB9C487F9CEAC99D847DB882C399EC77
-:10FDD000E89DDFC37A1FBD23D28DF99D94BF6B11BF
-:10FDE000BAAF8A261994BF98E206CAA57C2B577130
-:10FDF000024DFA3881D0774EC387964E06DCCE6925
-:10FE00006F8FC1C7D7FF8FB1DFFB27D74E127C2280
-:10FE100033D1336312C9B9693A7DF2F5DC4F52E848
-:10FE200077662E1F1D0AF9774B4AE975E8D79629A0
-:10FE3000FC077F4EEAA4388F3F2FF86B0AD99FD773
-:10FE400088F759BFED3CAF8C6B16F4B06AB1B89728
-:10FE500098CC1A898E1303F1B236CCE37F5B5C73C6
-:10FE600020EE782FFDBEC8CBCD6D19A787F783F79D
-:10FE7000B023CF3AF9C9C67BF8E5728AFB8D3EB252
-:10FE80002A8DE7371E3E5A4E71BEC9472EA671DC39
-:10FE9000DC7BF85591BFFAC845C4056F3A7C4CD459
-:10FEA00087FF6008633F397CBCDCCBF171C768CF4A
-:10FEB000FDC0D7CD971A8F411CFF7EED9CC56914FC
-:10FEC000D73A3B255BC4B5AE03DEE7C52F5A1FAD5D
-:10FED00005E25AF74D12EDBA2F887DD07D41D079D9
-:10FEE00018F8C1E07F3E55F1BD8A0F0FC42FD53EF3
-:10FEF000FC57C527ABFDCCF6B8369A418CDE7F3A6D
-:10FF00006EF8C949B42E7DDC70B7B9E731F22B5DCC
-:10FF1000604EF0895722DF75425EB4148AB846AD50
-:10FF2000A7C389FB18450522DF72A1C3093E8F3C98
-:10FF3000EC5BDD3122DE51C5C5B65CF027619F1454
-:10FF4000217E91D72FEEE929071F2DC27DDE34F4E3
-:10FF50007FFCA81C8FA1BF5D1744DC61B7ADC3E96E
-:10FF600090E3A01F3E6E1AF863D16A2BDD3B6AB99D
-:10FF7000D0B882FA29B3F78DAB858C6BFDFA71A7E7
-:10FF80006B41E366F68AF84E8CEBD48DEBA7B86034
-:10FF9000DE1FC59F76C7B81271EE57F96294F3FC65
-:10FFA00043F2772A8A9C7E23E4808A934AB0C8F77A
-:10FFB000B8E5B985D7A3B8CC5DBD629DE79BFD359B
-:10FFC000D84FC5926F175B84DC64867017EE639719
-:10FFD000182F1F4FC6F9E405713E290E2BDD8EFD4B
-:10FFE000D86012FC86C5A9DF4BEB58F6735EEF773D
-:10FFF000F1C9F4FB6243130FB24C9C8F97CFCC81B5
-:020000023000CC
-:10000000DCE07AF719E0FB77AC5513BFC325DACFF4
-:100010009D1941F750BA0F8F28C4FE9913E67C8EC4
-:10002000F17DDB3BE92BDAA773A29D8538F1F41E45
-:10003000FE6F914F703E07FFAE957D45FAB9F2D73E
-:10004000DE12F0D7FE17C6A99F79CE22F4B31E7A2E
-:10005000A7F9BF2789F7E9B8FE4EFA47CF75F2DD59
-:10006000CD1C6721CA53CD3D51805BF7659378B7AE
-:1000700096F544DD14E49F7DAC5DBC671B4AD787D1
-:10008000270B39B03CD34EEF9D35245AAD94B65F63
-:100090009841BF07632ACDC4F9C06DE9DFEEF88B44
-:1000A000C9425EA56DB004FCEF5C7EB8C399CA7B03
-:1000B000D938C6767C3FBCEFFC051163192ECF639F
-:1000C000DEC4C78B4DBAFA6ED4EF2B67E29936D5F2
-:1000D0003EE765FBE3EB4C723CE07989B83F112ABF
-:1000E0002F1AA6C4F6BD57487237CE46F7AE328DEA
-:1000F000D29EC7EB3AC82E28FCB7C9FF61A338BA15
-:100100005D364187990691EE32C8785F69EF53E713
-:10011000981F4FF14C9A3298FAF1533FC6FDB9D06F
-:100120002B92581B8DAFF433558FEB61366232F250
-:10013000F7DE8A8C867EE1F9CEE4A9A5930B41D740
-:100140005EF651909C381F11D5148CBF06A3DEEECD
-:10015000F9CEE469D44EB5AF6F9ACE3EA278443F53
-:10016000D14F7DA681CEAD0D46F62AFDEE00EB20E7
-:100170007FA66AF72EE7931FD1BB0D6E4ADFE3FC23
-:10018000F223BAEF379FD20F9A3DF4FD647335A581
-:100190009DCD8DF4FDC3E6264A6FBE35B200F4BF97
-:1001A000FCD05AF651907CAC6F337B82EFD7BC3BCE
-:1001B000B57F3AFAFE64E1B77937ADFFF2FB55F946
-:1001C0006481CFEEC542CFE474B9CE113BB0BED04E
-:1001D0001D29EE25BC344D9C5FBB9344BE71B278A3
-:1001E0002FD46D60DBD0FEA56916CABF9B6EA077C9
-:1001F0001DDCB1A2DF77B30CA4A75D3F636A03E007
-:10020000E48EE7DFF302F977AF12E5EE21E2BB9A65
-:10021000AF2A9F34A5CF8E9025CEC7C2FFCEE99DD1
-:10022000FAEFC36FB1985F687D759F3E141EBF954E
-:10023000FB96F605F477EC83B4A07DD1E0A47DA114
-:10024000E850D15FC314B15F33C3249D73D945F027
-:10025000830CC3F938C146FE4137FC177C3DBB64B3
-:10026000BCFB15FB41FA03D47E50FB40D17B32DF4F
-:1002700067C2DF21D631C9D8BF9DFEA1C962DD1D8D
-:10028000F191A41F77B79B1D9037938CC2EFD0DDFF
-:100290003EAF00F7C24BEEB637F6C7BFDE94EDFFB8
-:1002A0006938287E30001CAE58BF45DAEDFFC1F535
-:1002B000137F03DF5E2CEE6586D26BFB64657717D8
-:1002C00074FBCE64F741D04FB76633E19CD26DEB3F
-:1002D000FF1EF94BD3C4BE50F4D33085C97768F8FC
-:1002E0003A33AEE4776A3D7DEB5CCA88EF65CA7845
-:1002F000E350FCAA7505F1BDD7270F0EC09331AEB0
-:10030000AFF07E86D6D9E99CAAE8F7FCE0AF96402C
-:100310007ECD9FEC147E268351BE072BE449DF7708
-:10032000CD487157417286416FE9392CFC717E7E50
-:100330004E823F0B36E8E0B86BCB14B1EEDEF985A8
-:1003400006D809CEFFC5EE85DC3A3FA4E724F49237
-:10035000F3DBC47BE7BCC7591AEE8D20FEC789DFEB
-:100360006D117E10E3C35F9E843EB4E46123E92FE8
-:10037000E7716CE6ED963F287EE74EDD1FAC93ED0E
-:100380005AB65DBC997EDF8CD327F49F8F6C0DE944
-:10039000D08BA73FFCE009BCBFBEE4390DE6667612
-:1003A0001476779EFF78AF51FCCEAA8C3B9921EF53
-:1003B000F7D7EC16F7FBEB106F02FDE5C08EADF83A
-:1003C000FDC9FABD6666E3DF67E09D343ECED2B676
-:1003D000487E90E4FD6ED1C78D5ECBBC1B604FAEF6
-:1003E000DEAEFF5EB34B9FAF0BB9B7A84D91BF67B1
-:1003F0003092E5D2FDC42DC25EACF8F695FAAE9708
-:10040000E0EB5EA9EEEB7E41EF7B1B0F7F99FAA13B
-:100410005DE467CB7C17CF9FFB52C05FC1AD41F25B
-:10042000FC7349ACA08DAFAFE1B0CD013B40C30B35
-:10043000C24E70BE2D9AE0BC3CBC93FC0AEC45A3B6
-:10044000037AD83D878C6457A86FB7FD0CBF4BDB90
-:10045000F09C46EFD5D61F0AF309F85C5882F2A546
-:10046000876C0E27CA5F0C63B03F9FE778C3BDD887
-:10047000F3299D847FE0157609FE370BBF5FA1F05D
-:100480006F7C58F893973C21F1B36D9589F0EAD3CE
-:100490005842DA95785278FE95E1A93E3CA1DDF408
-:1004A000877F7F5CE29D21DEE6E8B64AFA5D0C8537
-:1004B0006FCBE18F52A1F72A3C1B399E7FA8DA3B14
-:1004C000E57B785F83E76AE0D9FE8FE3F98F908F51
-:1004D00085A4F77EFC53E8BD9116F2A32BBB86B230
-:1004E0005B0CAE7DF7581C1F7878E2B3A4E796C783
-:1004F0009EA95FC1C88E76ED14D8D1AE7B033FEBC9
-:10050000CB7E77FD53B9A08F167327FD6E8C3746CF
-:10051000BC2BDF9D367BFBF37CBCE2D8AF52F7638C
-:10052000DFBC1C46EE93B9725FE2CF1AFC2E60BBB3
-:100530008DEC6DF5ED61C2BE7640EF3FEB4E12BF24
-:10054000D35762E9295F01BD9CF78771D479B0B6B2
-:100550005DFEFE8B3CBFD52A3BC3BE90F7A11C6F4E
-:1005600050BDBA2922DE36236192137CA86501F3BF
-:1005700084677C1DBF67C4EFD5EFE50DA8070EC0EB
-:10058000F795FEC7BC7A3B87E23F4BE5EF4BF6EDB4
-:100590000F99AF5EEB8DB21A89EEE8DD86BA47C5DA
-:1005A000EF2B7E02BA8B0AD053838C4F3BF6FDDFD4
-:1005B00098F03B4DDDBBC4FD08CE21B7E29EFED9CD
-:1005C00036110F5753D035C6EFC4EF74083EB46CE4
-:1005D0009FE673A6F54347CCB741BC6B1F424FFB68
-:1005E000BEFEDDC37B037C64D4DF393C77943029C5
-:1005F000B7BCFDC64FF6C9AF90DFF1F8DF16CFDD0F
-:100600009BC3D7F335FEC66B13F5EFB85CE7D4FF99
-:100610004ED377B2F5BFD3D46B97F091FAA0D253F3
-:100620000F4D11723C3455F0BDC1A51F479D8BBFC6
-:100630003B4E3FDE6CB77EBC6F8B977F555CEB37D4
-:10064000C1EFB81CF7841CF73772DC7F164E2A1DE9
-:1006500068BCFF5FD3FF0B8D21EA0800800000001B
-:100660001F8B080000000000000BB55B0B7C94D5CD
-:1006700095BFDF7CF3CC7308210904C224242160D8
-:10068000880324542B94C9D300D6065C2D688401BA
-:1006900052C83B80B5D2D6FE3208222F5BA8D1A229
-:1006A000224E82E1A1613B118289863A286411AD14
-:1006B0001B698BFDFD56DCF828F23213A374E55755
-:1006C0005DF6FCCFFD3E321942B5DDDDE4A737E72C
-:1006D000BEBE73CFFB9C7BA929CE317C394588DC1B
-:1006E0009873E69E08215CAB7A8A12B385E87B4357
-:1006F000154D0E2184DB7BBC3E5688DA8EE16253B9
-:1007000032C1257D6F1A00B78DB36FA2F18DED7FD9
-:10071000781BE3BD07558785C65F6BFF280AFB5C26
-:10072000FC325C88E158F7519420B8FAB2C2F02646
-:100730001A77103CAB5515FE4CDACFE83363FC62F8
-:10074000AA0E7BCD82DA929656730FB5557B5B79F4
-:10075000FC0D9F69F0F8DEC641E376CCA7B6CAE887
-:100760008DB2537BBE5DDFCFCFF3AB53159717FD33
-:100770007BFF10B70CF35ADE895B4AED15FCCCBC4D
-:10078000B6FDF4D00B996E5A57D341FB440CEC5391
-:10079000D361D2608977756A6B510CD14BB4282232
-:1007A0008D9A8B62AB584DF4AC6A6FAE16D45F95E0
-:1007B000718F49105D023EB518DFA71F8388A375AE
-:1007C00076FA8BE877D1F779D452DAF755DFB1DBD7
-:1007D0005DD4063A5F8FC2770307697EE6003ED399
-:1007E0005D44BF1CB4662146D0BA83AF4739687CEC
-:1007F000A3EF75496FA39FCFFD9A0607A8653AB787
-:10080000AB7CEE8A2F55A6BFBEDFAD2E95F799D5EE
-:100810009E1689739DF4C9EFCD7539647FEAE23283
-:10082000E07F2261418E9ACC78BB000726CE69DE3C
-:1008300044A854F968DFCC6BE9B654DBB7CB24E6A7
-:10084000FBC0B7D4035DA3483E4E140F9F4C235703
-:10085000E7DDE332F0BC22B33B7505CD3B19E188FF
-:10086000B4D37E0F158F8B045F5F438BFEE25D6612
-:1008700037B59507E5F74EDABBA3206F270F4E5526
-:100880003DCAC07E776ADF15C2C3ED00DF3CCCA74E
-:10089000726F6304F619E09FEC9FEBB2F3FC13DE7A
-:1008A00077EEBA87CE773223DC09BE749945B98FCB
-:1008B000E5843E82EF752636820EFAF7E6821FB493
-:1008C0002E906160BEF6B69BB479F7348B41F34C41
-:1008D000CCB78BCF0DC6C7EEFDE097F7D0FCEA672B
-:1008E0005461A1EE6AD38A389CFF931D83F12BD704
-:1008F000E85C6DF2C7C505C96B75C7557D8960F9A0
-:10090000EED0F5C3C1FCD4F978324395782558BCB4
-:100910008250AE6E6D66B92675F3D8A6702BECD4F6
-:10092000268677272B74FEC407ACCEB584FF738A66
-:10093000366EA03686608384CDD45AA97DC624FB4A
-:10094000A1B6583F86D8A9106C2A1E976348A17D8E
-:10095000D4D6C9E0EBAB335D8FBA088FCD334B668D
-:10096000CC043EA26F99A06FD65C8AF08868210AF9
-:10097000D5F79EC077FB0F9A04EC478DB5A3F263C1
-:1009800092D37E27290AE1DDBFC3E4F5B0FCB9228A
-:100990009469422CBB49EACD270EF734751CCD5F14
-:1009A00063E0F355B7A85E1BCDEBAD271210C93F2E
-:1009B0006D4DFE01E4B5FAB86AB7D2B9F37DC9BF8F
-:1009C0009A0EB8C5E4B4D0FA5A1F75125CBB57F141
-:1009D0003AE4FE027A597313CBBA3863AB4D11591E
-:1009E000D4AEE93363DE99C38A788CE66D0E8B6AE8
-:1009F00002DE3599B3CF2951D4AA5BD627D27ECB5C
-:100A0000B79B3EECB1CAB557E8BFBACE6D2CB7154F
-:100A1000DEC1FD557B07C335C23800D3FECDF8E3F8
-:100A20006621DA5C91B1676EA0BF2788095754D060
-:100A3000697A3CF4E104F84AF2241A88D82385B88C
-:100A40006F92331E7ABFD1E8980D3A043A4D76D0B2
-:100A5000ABEEF0810AE0EDAD0E731AE8A8B5AB5F1E
-:100A600061BA06BE20BADF486D82E0F30784A46F46
-:100A7000A05DCA799D49F15AB19E68C8FB5915EF2E
-:100A80001A1A0A78FAA3D83E09510CBD58B520C7E6
-:100A9000003B07351684CAAF747D506C46251AADED
-:100AA000D4FFEF197BD4614176E23F5D298C7F81D1
-:100AB00059B87DD47F5FA4331A723FD61A9505BC0E
-:100AC000C65A93BCA0FB5863DF1A7C7FF328C5F19C
-:100AD000106D7D24EBE5C90AE0DA0827E4444958A3
-:100AE0006C043D368F5A6C84BC8FB5FB324A32079A
-:100AF000E0028C431F8497BF5714E136E23BCF8D51
-:100B000054FC06DA3F6023FCA02746BB09F8054CDD
-:100B1000121662CD20FCC82231FCFF8E9F9DF08B07
-:100B200018C08FF81D8DF59F67137DA84D9A2B4433
-:100B300037DB85156C17747A5E24792F205EA52922
-:100B4000526EAA771C29C2788DE85E8F754551F2E6
-:100B50001C45380FE030D9AAB9925FB95A7B7FAEF5
-:100B6000F42FBAFDECC8751973A9DD9E5B62465B74
-:100B7000A866C6F70C61EF5729569693CF49FF60D8
-:100B80008FEF5DA1D8533306E45BD7AB3AD97555E7
-:100B90007FAA7EBFCB2C52F0395777068D970BA9D1
-:100BA000D78B56DBECA9C17A043D237A94DB2B6EFC
-:100BB00013A46FEED571F6D4A9D4AF5E340BC89EE2
-:100BC000A65FB1F47B256508FDF285E865FB60D87A
-:100BD0006F9372EE8F54BC6B09FFD4DCC17A97A47B
-:100BE000E941A35BE1F3357E6564D853AA7841F30C
-:100BF0003BA973758C7638CC2BCFF5C23FDE4960AC
-:100C000029FA1B62594F7990ECD7BF68E7BCD3E84B
-:100C10003F02FB71CCE44BB6D3D0B11AAB13FB2F20
-:100C20001014E8905D2B15DDDC9E0AAF6DF3F3E642
-:100C30009E3190AF77DD1627E2B0C6754D91B0E3D7
-:100C400059629DFD4C06820AB1F7CAD4EBC7332422
-:100C500038E28CCE1738628A53C06F9DAFDB735D6C
-:100C600079B939D75F5FF5A7B6DBBF03FB757FB3F3
-:100C7000395E8A4977C6B401BEE97CAD131EC65BF6
-:100C8000E7D755FE11EEA3410FF5E25CB633CFAACC
-:100C900082E30A8D7F56FA1D8A7F3A7D676A7C5807
-:100CA000DE21ED51285F757AFF9036C4F7C98FEECB
-:100CB000607E080BDBBF50BE7F135F28C22CC5507F
-:100CC0007EAC45809F8906691F1397919C10DEF7C3
-:100CD00008F7E11E6AEF0A7FCBC472A8F1E75EF065
-:100CE00087A6BE2BBCDFCF48FEBFE34F476EC903CC
-:100CF000C17A18AA77D7D3B36A87F3DF75BF47964F
-:100D000086F42B443F43F44FE7977B7514EBD9559A
-:100D10003EAA2D525F357E45D0EF90FA863FE87BA4
-:100D200035ED8AD79FFC2DF44F21C4896F8F85E85C
-:100D30009DCE9FEBD91DDD4E9D16FE63763AFFA931
-:100D4000141907787E62F136034E3794C3EE9D9AEC
-:100D500028DB039A7D0B6D4F539CA3901FDB94718E
-:100D60007204FCF529B3BE8FCDDB4CF89F5ED33DFA
-:100D70006625AD3F9D2BDB53880B83605798580445
-:100D8000BB7E7AA4C5033A9D5626E4C13F9C561EFD
-:100D9000B85DC2F16607E005F17976824F99E47C8F
-:100DA000DDAFE8F6FFF482EF14F03C451C053D1C76
-:100DB0008A28E1EF284A4C31E173FAFEB4296BC569
-:100DC000C0F99B720DBCCEABD96FC283E9DEF7537D
-:100DD000C5DB445D8BE05208FFE4BCDF14A750FF85
-:100DE000FB3F1B3719FC75AD1AFC7DF8EBE41B01CA
-:100DF0006FE37DBEF7659F6971905FBAEA270B3E8E
-:100E000093FD653906E84BB9C64357CC8468F0A713
-:100E1000DF3B2E1A7E47F743FDC70F44B883F876B1
-:100E20008EFC94181F044F783429D88F1DD9BD39F2
-:100E30001DFB949B3D594EEA3FDBF87412E28DF2A4
-:100E4000DD8FA4731CBC7B633AF299F2A6CDE92E28
-:100E500086C3DD9C4F19E5B92FECBF79D7A6A0B8A2
-:100E6000BB2A5F65FC4BAD470AE16F67DFF0E9C362
-:100E7000769A97F633C50EF1BA57743F0CFFB81047
-:100E8000F131F2B7062BDB73DACF05FE374FF8FEF0
-:100E900073D0E313191F99CA68DEE55C23D367A1F9
-:100EA000F06E89A771B141B1378BE0F9631A317FD8
-:100EB000F13AC59C003BB062D864D58175C3188FE8
-:100EC000251B2677A17FE183B27FB6C57BF024F690
-:100ED000F98DD9D9EC607B9352326900FFCBB966AA
-:100EE0005EB7688BC2F1BFFE9DB427E21A83CF794B
-:100EF00059E3BFF8CAA2802F3FD0F872DB83EF1C02
-:100F00004DA07DEDB1EE2BB01B6F3F7E26D54FFD82
-:100F10000531E73221E76966F75315387793C589BC
-:100F200073646725AAF1347FCA8F731F43BBE8C17E
-:100F3000C54F55C0DE6EB772DEA6E3B74A711A60C0
-:100F40008F5F6FFCE112D0EDECE3568EDB57358EF0
-:100F50008F1743E8A9DEEE21FE3B28D1D9576FE574
-:100F6000F6857ABB70903CECAF4F60F8B7F50E6E2B
-:100F7000C57C295FABB4FCF87AFB4DFD325C3828A8
-:100F80009ECDDE60130EB2534971AE517974CEB46A
-:100F900089354D1BB573A5D1FAC99EE47CD0217B60
-:100FA000E3CA2E84BCE63C998FBD797243128CF261
-:100FB000F2073FD85941E373F34AC6E551BF75C7FD
-:100FC000675C5778BDE39185A0777993459E4F3B49
-:100FD000F7D9C7D3E39FA2FD3D6F9838DFAFDBF1B0
-:100FE000C1CE8DD42EDDB2D21C2CEFDFF6BCC91AD7
-:100FF0003EDFA457D7A3C33FAE579B93587F9A4871
-:10100000AF32FF79BDAA7B700DD3EF81BC92D9A01E
-:10101000FB59932709FA7476C20C9673CF6185E960
-:10102000AFDB717D7DB176DE2A836FCBF4E4013BCB
-:101030007E4964337D8F747C928EB8F752FB82BFF9
-:101040007BEE43746E3F9DBB9DE8EB1F7FEDF83454
-:10105000B37B9C93CE37CD20E3DD6BE2D63C835649
-:101060002FE83697444A9A2BA8CB68FE93FC982722
-:101070009AF0A9EE54FC6159F067B79E3322DFA3C2
-:10108000BCF1C3E038827E3E0CF2DBD7C3F79BDABB
-:101090005AEC93366077BFF36783F007F9E99B7BDF
-:1010A000C2843FE8BB57F313EA33139F7A3B46B23F
-:1010B0005D00DF8CA8C7754C68027CCE2CF9D87B0C
-:1010C00088E22659C711EAB481739EEBB890053BBC
-:1010D0001B7ADEDA972FB07C54B73FF299C2E79FB4
-:1010E00075CE98F5CDE73FB2FB4216F877CED433F4
-:1010F0000DF956AFB9270B7CA87D45DAF37F940E26
-:101100007A7FC5063A08E979AD62653929542F72AC
-:10111000DDA0F7B8AC1BD476EC627BDADF29EB37C5
-:101120007586EEA278D43B567CD0057BD69F20F303
-:1011300028DADF05BA4D1FA7F941635FD25CB26BB5
-:101140002F5E950799FF9D85FE8EC73EBE6AD8012A
-:1011500091152E10579C873E53FFC2D5C9EB21E74E
-:1011600067BD23A6C03EBE99F5B75AAEF7BD1A6E4D
-:101170005739EEA1DE20FE5D3D875715AE41F58063
-:1011800070E10A9A576776FC80E3E313AA405C5744
-:101190003751EA937859EA53CDBA23E684A0FD7615
-:1011A000429F186F192FCE7EF56FAC975B66BA3AE7
-:1011B000A197E1B085D82F21DAAB28DA3CE27FADE8
-:1011C000864344A796F717AB3C5ED7AE8A915893F7
-:1011D00010E94DA373148BAD46C4D3B3856F3AEABF
-:1011E00036C2D8F3CB5B687CCEABEAD44D82F3A792
-:1011F00045259C57BA5357213E32281A5D7DD97335
-:1012000083FD599EF453D35585FD58DFC8708E5326
-:1012100066CDAF2905BEFABCAC61721EEDC37196F6
-:10122000F0F665CD857EFAFBB2E6450ECCBBEBD57C
-:10123000F015EC17852FFBAEA0EF84E5CBFAE8E7BD
-:10124000E4472027759764BDA350FDEA09C4E7ABC6
-:101250000E93BC203E3424BF6B801D273A83AF170A
-:1012600088AF2EF81FB770B9A03F934678A13F759D
-:10127000FB1561449DA8C3D2843A52ADA9270EF252
-:10128000BCB1FD4F66C8735DDB3B66C724AC977588
-:10129000275248B6E3759AFFAA691FFF2EEA7C35EC
-:1012A000C7A517AD31BEC3F97BD5C156CED3AB852B
-:1012B0009FF3F4EA96C1F2D29FE0E0BA48A87E8498
-:1012C000E53B06E9C5ACED522FEE52C50AD839A16F
-:1012D000D5696725C4733C32B04EC6BB2EF5C2C378
-:1012E000885F02298A53A1AD02619E75888B3CE913
-:1012F000329E09FCEE85EC656C57BCD977D0B902FB
-:101300005ABC3B6BC336A31A84CFAC4E59970C849E
-:1013100089F243CC6FF768F041B84A22F27358AFB4
-:10132000B26057030659470D3D47BD562F3A817AA3
-:1013300052E600DE731213A51D135E969F2E83FCEA
-:10134000BECB40E35306D62FC997EB07F2215907CE
-:10135000BB9E5DD94DFC2923FEEC253EA37D9EFC62
-:101360007119D99916F2C780FF95FC315A5F7D0635
-:10137000F7BF58EF64F860FD4D0C1FAA7731DC5EB3
-:101380005FCCEDCBF525DC7F02A87E17FF7BBA1181
-:10139000F2D0051D1B35009F8A0981470D9E7F2ACB
-:1013A00046190C8F52787E76FED38D1ED48B66DA6A
-:1013B00035FD764422FE3A6B9375A8B33659876A99
-:1013C0001DE5BE259FC6CB66ADDD2DF350573AE631
-:1013D00015C42CE0FCB59FF257D8A395F9EE3CF06C
-:1013E000E5F8F1FCD46D6C276D5C073D75F70DD108
-:1013F0005C077C83F271FA746EC6D475D904E74633
-:10140000282CBF642F6E2CD1F34ADA27BF53DEA3FA
-:1014100014AAD565D87FD548DB54D8DFCF5DEEDB85
-:1014200080874EEFA251CB53110F75991CEFA28EFE
-:10143000EBF9BD49209FD2EB7DFABC0E57EEDD588B
-:10144000372B63DCBA29B03BA464B0732EB36801B8
-:101450005E2E43B8B296ED96C3083B70B726C779A7
-:101460000E1917FBCD0E630CEA3761B9B11E5AD7BE
-:10147000A5F1F9B8C6E7131A9FDF429D8CDAB7A928
-:101480001F6D37F5A39D01FA4A7965BA3D91575210
-:10149000C6F22BFA9200EB75C1D9D02F696F92205A
-:1014A000D75B34F94DD0EC4D576E49955CE7E37D41
-:1014B000AAB47ADB05ED1E443FAFBE6E60BDE07698
-:1014C000DE8DC263859D7F49E69D6234C52304CFCE
-:1014D0007B299EED906ABD23F363D2F37953651E99
-:1014E000200E58E4BC04470EF464AD566FEDF51AB7
-:1014F0003C26D4A763BAD363E07F35FDD2E143FF36
-:10150000ADB2BDAE994230B5AF28F27C35F3BAD357
-:101510008761BD6233707DBB498E9FD4F4AF264591
-:10152000DB4F3B8FB0FA92C08FC0E197929610BC10
-:1015300029C2BF4CDA7D7F3ADB6BE14F9F07BBA826
-:10154000F8DE174E8A2B0BA62E318E043D7C3B0114
-:101550005717E42C31DE8CF1D6F7EDC1E3237C493B
-:101560008A1D70B61C1FD1BA7398330836BDF83E79
-:10157000C6CD869C250504CFB1788FD7436E7E2BD0
-:10158000E5CBB6BFED0CE856D521E3F6BCFD6D17F3
-:101590005F845F6E8B74C2BCEFCB4F667AAFEDD8C1
-:1015A000B305F2D6DB2AEF0336B5FC69E7CF799EA7
-:1015B00005D724B4AF2F5BD077561EFDE362E0352C
-:1015C00027DCF705E0878ECE643CE70C977AFDC8F0
-:1015D000D1BC25D0D3DEB6FD3F81FECD89A68016D5
-:1015E000F8BC60E33A44E5810905D0D3DEC8EE8556
-:1015F000D8BFF6798B13725A79203E0FF58143F9E3
-:10160000B21E5E31716B12FCACE1E57DBB7F8EFBDF
-:10161000D5E76D7C2F541723E3BC4AB571DA4AE64F
-:10162000DFAEDD4F03EF7D36BE9FAD40AD8AE08A71
-:10163000DD695CC77FE5EB8F16820F85EA8EDDE8FA
-:10164000FFE2399B017438697645CF801E9E347164
-:10165000BE59A1C115A7864B7CC27B8A987FB15B1E
-:1016600093E0672B87FFF476E03D47DDBA13F98EF0
-:10167000D863E1BB8973FB886EB4EE5CB3690AB8CA
-:10168000DCBB2FD20879B9A06C5DF814F66F96F325
-:101690002ED8B6323D3DCDE305BE47F304ECD6056A
-:1016A00065DBA0FE73CD7BB2908F9E7F7E0EE7A59B
-:1016B000BAFCEAFA52F99C65905F644B40F6A85276
-:1016C000FB5BD83D2282FC6D85069E3FF464EF53A0
-:1016D0006260FDF91693DF4C34AAB08875D6980184
-:1016E0007DA84CBCB518E7AB3434A6236EA998DAB4
-:1016F000B3107A71CE26AC0934EF4DCD6F551E5C18
-:101700003317F1EFF5F0B9A2D9A34B09D27F5D6A87
-:10171000B77983EF2543DBF7EA85FDADB401F8DE49
-:1017200015168EE1F5FDDE34FBAA91A7D5C648FB60
-:10173000F13ECD6F213BF6B5E6EF16AD1E3CBF3F47
-:101740003F86BF5F6BEE4987FFD3F70FE46B7EC325
-:10175000D8930E7B15BA6E0EC211D8911714B6230A
-:101760009507950F54A253A5D5E355411761D6CFE0
-:1017700069BCA2C87509D334BAD3DA0D05C9FCDD3A
-:10178000CA169BCB46EBAAC27AA210175547F6445D
-:1017900021DEE97D59154D1ABB62E334FEA4682CA5
-:1017A0000BAA3756F84C2E5BD6107C46FC44F396B9
-:1017B000E36FFAFE3305297C9EF2F670FE9EB0F7C9
-:1017C0004C839C96EF18BC0EE7B207E95F6FFBAE47
-:1017D000B8E0BC3C45C33BA07CC07A12F8FAC324F5
-:1017E000F0BDD220D6E1FEF23CADC1BD26C1C22A79
-:1017F00061BEF7ACFC6B4418E4E5FCA56AD6DB5E81
-:10180000A587EDDADB0573D92EF59A7AD8AEBD7EC1
-:10181000F42EB60FBDC37A16C24EBD5DB05C8E8F7E
-:10182000EC59E8A0F1FD3A3C46B0DF7FEF680DDBF4
-:101830008F39AA7C57217699ECB21EB4E1543DE76A
-:1018400017264770FE7DBA40ABF70CF087F32E5D8C
-:101850006F7A8563FF41E8617904D775288E6A79CC
-:1018600011F1DE823827DE6B94639D940373F07D63
-:10187000636CCCE565E0CF1DA3DD450539B8DFEC31
-:10188000E13C82A49AFD4DEDEF2C9C4F064C7DBBB4
-:1018900061A7D247BB6717101ED5E6EEF5D984D2F3
-:1018A00045534F174AE4B355698FC41E2957BD9954
-:1018B000BBE43D8D765F79B7467F41494C23E442D6
-:1018C00091FC7DBDFDC05BB02BBDDDE3D81E87EA7A
-:1018D000CDB9F6C7A2601FFE4C7EDC1394EFFF79F2
-:1018E000F11EBE679D8FF720D42E5937581EFABFC0
-:1018F000BA83F33EB125A81F72D830180E9523C8BD
-:10190000A37F90DDF130DDB76B7A5595D75D0B3A4B
-:101910005C85E711AC06C1AF85C021F345898C1306
-:10192000B6C3FF133DAAC7F84F719EBEDF2460C740
-:10193000D792FF62B82DDC8B7CC5B09FFC53ACF412
-:101940004FF00B5551DD5C9FEA6DB3F07DEF431D09
-:101950009F24E1FC24875C87A9EA78290EF9FB3EE5
-:101960002D5F203F18C7EF63DA3AE29077E8FDD5A4
-:10197000065F3AF0A28888E375BDBF46F5A703FF6E
-:101980002AA53B0BE3FBF2EDDA7C8255C082CF51F6
-:10199000AD487D171D2ADBF350BE3DA9C92BD98563
-:1019A0002C7EDFF1B2AC0FE876A042B327AFA13FA7
-:1019B00053EABD5DBF57A2A515D0F721EC43428184
-:1019C0001E17AFE0FACDE3050E096BEB795F595FA7
-:1019D000E2F1DA572E64A564629D362FD80E8D1B76
-:1019E000B02BD0FF04D6FF874C7174AECA9D8A73AA
-:1019F0002DEC54E99A229A2E961B571671DD4C78DD
-:101A0000386F0BC52B548E2617483A551A8615C6C3
-:101A100006ED779E6C7AC214B6337ED89D1FC53E04
-:101A20005A843AC50F4BE5BB81ABFE2658CF719E59
-:101A30001DD28E436DAE18AE95E3E52B1AD7C70FB6
-:101A40008147289E15EEC6A238C7B5FD3ABEE76DA0
-:101A50003A7E79A611C17498BFA66804B5CBADFFD4
-:101A60002C1DE479CF7758FCF0AB15A52BD7470F89
-:101A70002137D7F8831D41FE2B05FCF5F2FDC6F595
-:101A8000F00F6DAB15FF29D48B04E95533EB17E943
-:101A90004B905FB8B920A4EE50BE782CE26AE15EAC
-:101AA0003C167E86F46AA17388FC920CE42803BF7E
-:101AB00019F1701B8ACF5F0AE4BBA49B0BA49E6F35
-:101AC00099E90AC06ECE500D1C8787EEF765818CB0
-:101AD00027BAE322EFD7DF7380D9335449B74443A1
-:101AE000FFDBD0B7C4B84807EE830AF3C3E5BCC335
-:101AF000363BEA3781C397B9BE1B783862BEBC3724
-:101B000088102369BC2B615253B01FF975A13C6F3B
-:101B100078B68C5BEA324C7FBF3E941979B53EC4EF
-:101B200071436638DF97F4B67FCE7E2BD09963C7BA
-:101B3000BD466F376587A44F755FFF571CFC6B6F01
-:101B4000E75FF81D5AEF579FF0FBB48DDAFBC0D763
-:101B5000DAB5F75DDD8E48F4078A3F2AC2BC4D5ADC
-:101B60003B502790F562BDD5F35FBD1E1094078FE3
-:101B70002E1C3A0F8E714704D7091CF143D55582AC
-:101B8000EB04A969B24E801675825493AC130046DB
-:101B90009D002DEA04E8479D0030EA0480512700AB
-:101BA0008C3A015AD409D0FFC57CF95E2640422CFC
-:101BB000EB97116CDFEF6B56BD88CFEF3B2CEFA19D
-:101BC000EE6B54F89DD645FA3EFCDC35EF750E6A97
-:101BD000EF757CDBF85EAFAE4D75825575A6BE63C2
-:101BE000A8EBD4B52ACE35B02FF5F3F9FB1B3B7328
-:101BF000DE2D457FB3C96970804F97E250AFAAECE4
-:101C00006CE6FA5341FC6133F3B74511A897DE65E2
-:101C100091796E8D4ABD53F83E94E3E01A4B37E755
-:101C20001F557B157B59F07DEE4D9FB11D586B8B79
-:101C30006A029E353E9BBD6C88F71F7C2FEC1057C7
-:101C4000EF9B97C929A226A288EF9B97E19E995AFC
-:101C5000A17E65E4FB634A4C87431EF1AE2A03660E
-:101C6000DD2EF53EE43D556567EBFA4471ED3D34FC
-:101C70002A03E07FE8FDB3BB3032F64C380C859880
-:101C80008CB8A9F8F1B2FD6DF4BDFEAD168E3B56D1
-:101C9000E6BB97438E8E995C5C273976D8C6F9D11E
-:101CA000C7DBC60FAA937CEE725717F2FDFC68AE35
-:101CB0005BAC3229EC97F38BC7C5F3BB81E326F607
-:101CC0003F1DAE925ACC5B35C9C1F5A9428BB89F76
-:101CD000F7D1DE6951CBFA54B856F11A085E2C9C44
-:101CE00066E8CF22221BCB8B296203DE532D12F232
-:101CF0007D832E37ABB6291C1770A1200EF7929268
-:101D0000BE8B3AFFED32DE2F2CB5C8F835D120EF6F
-:101D1000B31337C9F72D3F126E33FCED72F28B68A7
-:101D2000C94FFEAE87FADDE1A393647CEE88C7FE5F
-:101D30008B4F98F8BD6F61FCF7D3DDECAF0BF81D4E
-:101D400083E2BF47BD72C3F5F527F41DC33193B4D9
-:101D50002F4447CE8BBA20975C9F71737BA2BE9CA9
-:101D6000DB1933A59DBEFA2E91786407FEE17DEF65
-:101D7000235F4C8C8F74C2DEE97A7FCDFBC430D9EF
-:101D8000EAEF13C7502B82DE276E713978FF44C308
-:101D9000C9A90ED0E3AF114ED0437FA7B86566C97D
-:101DA0002EF0C915253CF82EEE51B6125D8B701041
-:101DB00005756E9F4B45DDFAB062E777D1D7D8C97C
-:101DC0006D0FE31D4F5DAA62571CA8876F2D8C23F2
-:101DD000BC8B529219EFBA76592F650AC5A19EAEF7
-:101DE000E983CBDD563862A07F8EA617BD345FCA6B
-:101DF000C92D5EC8DBB7A8A33E87F91E6173366B99
-:101E0000F91AF83EE786315C4FD5E5A6BF25BE0935
-:101E100072F346A1F433A5A5EF98100774E5BA8FC5
-:101E2000E2FC0BCB3E7B388ECF37741D8BEC28DF6A
-:101E30004B86D6B174BBBC5BAB83C37E1AB53AABE1
-:101E400051ABB31AB53AAB51ABB31AB53AAB51ABD0
-:101E5000B31AB53AAB51ABB31AB53AAB91EB772B9A
-:101E6000B87DBB7E35B7DDF51E1E0FB2FFEF5DC737
-:101E7000FE87D6413FC2BCD03AA8B03AA2D98F92D1
-:101E80007ECBFA7348DDB378F8920D44BFFC06B3FD
-:101E9000135D7A1D14EF97EF8B607B70B170C8FAF9
-:101EA000A74EB708AE97F60BDB14D03F2F639CD13B
-:101EB00040E37FD5F8A0D71FA11F381FF4032DF4EE
-:101EC000C39836A01FCF984985B3A5BFF7B0BFB759
-:101ED000315FD7AF21FB41F052611F643F2E86D89E
-:101EE0000F4A3CEE061ECB3AE5BB26FDFD661E35CD
-:101EF0005F4E19C29EF8A43D1913E6DB87EF8CA94B
-:101F00000DE3F7C1C7B4F758C736CA777165A28425
-:101F1000BF3B845D89023F960EEF7BFF699ABF74D9
-:101F20007304C72DEB472E9BF6BFB12B9F150AA656
-:101F3000DB6FEAFD951F132E056152FE0ACC2203CA
-:101F4000F735C210C67A50A86E51703FBAEA5E31BA
-:101F5000197C2EB094EC009EF1DAFDB688D5EAAD7E
-:101F6000C6EE8A3D049F8C4B74E25E6B74C2218185
-:101F7000F74F8575C599B08BFE31EE09453978BFAD
-:101F8000BC55C1FAF04C79FE3B8AC39B205781C3F4
-:101F9000E373C0EF7916471BEA00CEA284A5C8F30D
-:101FA000E7453B72500770768D9270BCA34D71224D
-:101FB000944D585AC0EFCFAC5B3FB6E2DD9A22A2F7
-:101FC000E95C9661EE1C7CA7A6F85399378B3EF628
-:101FD000633717C9FC6BC46BC28F7BABBE59917C56
-:101FE0007F26321D3918A7B8F2BB45241F7FFC9EFF
-:101FF000EB16AC4FD4F08CC72DA20AAE76DBD09E88
-:10200000D0EEF3BA0CEE52B445511E23F71BBCD9E7
-:1020100068DF34F87E8C7E92E722EC57F4D8E489AE
-:102020001904275A7C6C273B5CAE5BB1FFAB335D78
-:10203000C5180FAD9F83B7C8F3099FDB302FF41D80
-:1020400096CECFA54552EECB8AA4FD98BE56DEC7EC
-:1020500086F2BDACC8A0D9B7BF8F37E15B8AEFE984
-:10206000F88BAD8BB3810FE17B2FF0247C17625C82
-:1020700044C470BDE3FA72E6E1EF951549F9227B9D
-:1020800056F5B1B467DCA61BBDC3103F8EFA857749
-:1020900018F01DD5D867C3BFC378D6D367837F7FB9
-:1020A000F6C13E1BFA9F75C977D2A1FB3716C9F757
-:1020B00013E9D3FB78FD58FA5637C7E97DC31047BB
-:1020C000A5977FBC5EDEBB64B07F19ABF997B1BF4B
-:1020D0004869EF21791BFB6434DF6F8B82581EAF98
-:1020E000B44A3DADFC45D9A1366AC76F277C83E26F
-:1020F000AF095EC27B505C64EC97EF2D09069DF63C
-:102100009A1886CC22BEAA11F2BDE528CD6E206EAB
-:102110002B25BB50537EF432BF03C07AEC8F3B5B60
-:10212000C85FBB49C2E4AE918F2E9FBFA68BF3C39D
-:10213000ED57FBB57CB3753DF2678ADF06F5579620
-:102140001DE982BFA9DA3BB8BF66C5679CC752FCD0
-:1021500036A8FFDE1F7FC0EF6CEADA07F7137F9F18
-:10216000029F75FE1E33F92620DF3B5613E694FFCF
-:102170007EC0B712FADE541DC1EF6777FD3A8FE5D6
-:1021800046E737AD6FFA76F2B196E77BF24406F494
-:10219000E19BDA5ED8A7B441F6C9C375BED9916C8C
-:1021A00077EAB4FCAAB6CCCE7E3EB1D6CAF6AB5026
-:1021B0000D7302AE354A3B238A55CD4EF958FF4F79
-:1021C000DE3E8CEB797C00C03193F8DD71DC5A097E
-:1021D000F78DB0B07D28349454EFA1F6A86105DBEB
-:1021E0008104BCB824BE3F03FBA0427F655DB5CE31
-:1021F000EC53E4FDBE2307F9AE7EDFD4B0D1DB7A29
-:1022000010F9B2E27D7219EA8A7746F0FD4100F5D5
-:10221000463A4FC33069471B16A4B31F088892D2B1
-:10222000958843E68771FDB16198E351DC27365408
-:102230004CE438FAD07F4BBFDB37D7EA441CD530AB
-:10224000D9B106EF551A7EE1E0F15714B99FE75175
-:10225000499F86B9F2FC0D15319CF7E87C686874DB
-:102260008DC4FDD4CC31EEFF00DF4769F7730DC993
-:10227000D44FED134AC9821F619F4912DF19331DE4
-:10228000AC77C7164C7C74B783DD891FF74475B3F0
-:102290002307E5C5FF033C759D8B10370000000048
-:1022A0000000000000000000050207000000000020
-:00000001FF
diff --git a/fs/bio.c b/fs/bio.c
index 88094af..dc17afd 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -507,10 +507,8 @@
int nr_pages;
nr_pages = ((queue_max_sectors(q) << 9) + PAGE_SIZE - 1) >> PAGE_SHIFT;
- if (nr_pages > queue_max_phys_segments(q))
- nr_pages = queue_max_phys_segments(q);
- if (nr_pages > queue_max_hw_segments(q))
- nr_pages = queue_max_hw_segments(q);
+ if (nr_pages > queue_max_segments(q))
+ nr_pages = queue_max_segments(q);
return nr_pages;
}
@@ -575,8 +573,7 @@
* make this too complex.
*/
- while (bio->bi_phys_segments >= queue_max_phys_segments(q)
- || bio->bi_phys_segments >= queue_max_hw_segments(q)) {
+ while (bio->bi_phys_segments >= queue_max_segments(q)) {
if (retried_segments)
return 0;
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 64bc899..e8865c1 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -412,9 +412,10 @@
pdev = part_to_dev(p);
p->start_sect = start;
- p->alignment_offset = queue_sector_alignment_offset(disk->queue, start);
- p->discard_alignment = queue_sector_discard_alignment(disk->queue,
- start);
+ p->alignment_offset =
+ queue_limit_alignment_offset(&disk->queue->limits, start);
+ p->discard_alignment =
+ queue_limit_discard_alignment(&disk->queue->limits, start);
p->nr_sects = len;
p->partno = partno;
p->policy = get_disk_ro(disk);
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 473d584..5b2e5e8 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index c1343a9..9cf736e 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index d814da4..d772668 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
index 472b7bf..a091cab 100644
--- a/include/acpi/acpi.h
+++ b/include/acpi/acpi.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 54508cc..7bf83dd 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -252,8 +252,8 @@
struct acpi_device_wakeup {
acpi_handle gpe_device;
- acpi_integer gpe_number;
- acpi_integer sleep_state;
+ u64 gpe_number;
+ u64 sleep_state;
struct acpi_handle_list resources;
struct acpi_device_wakeup_state state;
struct acpi_device_wakeup_flags flags;
@@ -383,7 +383,7 @@
};
/* helper */
-acpi_handle acpi_get_child(acpi_handle, acpi_integer);
+acpi_handle acpi_get_child(acpi_handle, u64);
int acpi_is_root_bridge(acpi_handle);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index eb0e718..b396854 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -8,7 +8,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -196,7 +196,7 @@
void acpi_os_wait_events_complete(void *context);
-void acpi_os_sleep(acpi_integer milliseconds);
+void acpi_os_sleep(u64 milliseconds);
void acpi_os_stall(u32 microseconds);
@@ -227,7 +227,7 @@
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id *pci_id,
- u32 reg, acpi_integer value, u32 width);
+ u32 reg, u64 value, u32 width);
/*
* Interim function needed for PCI IRQ routing
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 3988f93..4447a04 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -47,7 +47,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20091214
+#define ACPI_CA_VERSION 0x20100121
#include "actypes.h"
#include "actbl.h"
diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
index 9ffe00f..e552635 100644
--- a/include/acpi/acrestyp.h
+++ b/include/acpi/acrestyp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -397,7 +397,7 @@
struct acpi_pci_routing_table {
u32 length;
u32 pin;
- acpi_integer address; /* here for 64-bit alignment */
+ u64 address; /* here for 64-bit alignment */
u32 source_index;
char source[4]; /* pad to 64 bits so sizeof() works in all cases */
};
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 1b65879..ad20016 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 0b9b430..c637b75 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 6f3dce9..5b02e30 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -1,3 +1,46 @@
+/******************************************************************************
+ *
+ * Name: actbl2.h - ACPI Specification Revision 2.0 Tables
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
#ifndef __ACTBL2_H__
#define __ACTBL2_H__
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 73af408..3f08e64 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -385,19 +385,6 @@
struct uint64_struct part;
};
-struct uint32_struct {
- u32 lo;
- u32 hi;
-};
-
-/*
- * Acpi integer width. In ACPI version 1, integers are 32 bits. In ACPI
- * version 2, integers are 64 bits. Note that this pertains to the ACPI integer
- * type only, not other integers used in the implementation of the ACPI CA
- * subsystem.
- */
-typedef unsigned long long acpi_integer;
-#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
#define ACPI_INTEGER_BIT_SIZE 64
#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
@@ -421,6 +408,19 @@
#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
#define ACPI_DO_NOT_WAIT 0
+/*
+ * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
+ * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
+ * pertains to the ACPI integer type only, not to other integers used in the
+ * implementation of the ACPICA subsystem.
+ *
+ * 01/2010: This type is obsolete and has been removed from the entire ACPICA
+ * code base. It remains here for compatibility with device drivers that use
+ * the type. However, it will be removed in the future.
+ */
+typedef u64 acpi_integer;
+#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
+
/*******************************************************************************
*
* Commonly used macros
@@ -793,7 +793,7 @@
acpi_object_type type; /* See definition of acpi_ns_type for values */
struct {
acpi_object_type type; /* ACPI_TYPE_INTEGER */
- acpi_integer value; /* The actual number */
+ u64 value; /* The actual number */
} integer;
struct {
@@ -937,7 +937,7 @@
acpi_status(*acpi_adr_space_handler) (u32 function,
acpi_physical_address address,
u32 bit_width,
- acpi_integer * value,
+ u64 *value,
void *handler_context,
void *region_context);
@@ -997,7 +997,7 @@
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
u32 current_status; /* _STA value */
- acpi_integer address; /* _ADR value */
+ u64 address; /* _ADR value */
struct acpica_device_id hardware_id; /* _HID value */
struct acpica_device_id unique_id; /* _UID value */
struct acpica_device_id_list compatible_id_list; /* _CID list <must be last> */
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index e62f10d..c05aeba 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -311,8 +311,8 @@
#define ACPI_MEMCMP(s1,s2,n) acpi_ut_memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
#define ACPI_MEMCPY(d,s,n) (void) acpi_ut_memcpy ((d), (s), (acpi_size)(n))
#define ACPI_MEMSET(d,v,n) (void) acpi_ut_memset ((d), (v), (acpi_size)(n))
-#define ACPI_TOUPPER acpi_ut_to_upper
-#define ACPI_TOLOWER acpi_ut_to_lower
+#define ACPI_TOUPPER(c) acpi_ut_to_upper ((int) (c))
+#define ACPI_TOLOWER(c) acpi_ut_to_lower ((int) (c))
#endif /* ACPI_USE_SYSTEM_CLIBRARY */
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index 6aadbf8..0cd53e3 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 0946997..e5039a2 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2009, Intel Corp.
+ * Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 0ea5ef4..2983176 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -92,11 +92,11 @@
/* Performance Management */
struct acpi_psd_package {
- acpi_integer num_entries;
- acpi_integer revision;
- acpi_integer domain;
- acpi_integer coord_type;
- acpi_integer num_processors;
+ u64 num_entries;
+ u64 revision;
+ u64 domain;
+ u64 coord_type;
+ u64 num_processors;
} __attribute__ ((packed));
struct acpi_pct_register {
@@ -110,12 +110,12 @@
} __attribute__ ((packed));
struct acpi_processor_px {
- acpi_integer core_frequency; /* megahertz */
- acpi_integer power; /* milliWatts */
- acpi_integer transition_latency; /* microseconds */
- acpi_integer bus_master_latency; /* microseconds */
- acpi_integer control; /* control value */
- acpi_integer status; /* success indicator */
+ u64 core_frequency; /* megahertz */
+ u64 power; /* milliWatts */
+ u64 transition_latency; /* microseconds */
+ u64 bus_master_latency; /* microseconds */
+ u64 control; /* control value */
+ u64 status; /* success indicator */
};
struct acpi_processor_performance {
@@ -133,11 +133,11 @@
/* Throttling Control */
struct acpi_tsd_package {
- acpi_integer num_entries;
- acpi_integer revision;
- acpi_integer domain;
- acpi_integer coord_type;
- acpi_integer num_processors;
+ u64 num_entries;
+ u64 revision;
+ u64 domain;
+ u64 coord_type;
+ u64 num_processors;
} __attribute__ ((packed));
struct acpi_ptc_register {
@@ -151,11 +151,11 @@
} __attribute__ ((packed));
struct acpi_processor_tx_tss {
- acpi_integer freqpercentage; /* */
- acpi_integer power; /* milliWatts */
- acpi_integer transition_latency; /* microseconds */
- acpi_integer control; /* control value */
- acpi_integer status; /* success indicator */
+ u64 freqpercentage; /* */
+ u64 power; /* milliWatts */
+ u64 transition_latency; /* microseconds */
+ u64 control; /* control value */
+ u64 status; /* success indicator */
};
struct acpi_processor_tx {
u16 power;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d930807..e2ea0b2 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -43,6 +43,7 @@
header-y += bpqether.h
header-y += bsg.h
header-y += can.h
+header-y += cciss_defs.h
header-y += cdk.h
header-y += chio.h
header-y += coda_psdev.h
@@ -125,6 +126,7 @@
header-y += nfs4_mount.h
header-y += nfs_mount.h
header-y += nl80211.h
+header-y += omapfb.h
header-y += param.h
header-y += pci_regs.h
header-y += perf_event.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 20f3156..b4c85e2 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -841,7 +841,8 @@
static inline int ata_id_is_cfa(const u16 *id)
{
- if (id[ATA_ID_CONFIG] == 0x848A) /* Traditional CF */
+ if ((id[ATA_ID_CONFIG] == 0x848A) || /* Traditional CF */
+ (id[ATA_ID_CONFIG] == 0x844A)) /* Delkin Devices CF */
return 1;
/*
* CF specs don't require specific value in the word 0 anymore and yet
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 1896e86..ebd22db 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -316,8 +316,7 @@
unsigned int discard_alignment;
unsigned short logical_block_size;
- unsigned short max_hw_segments;
- unsigned short max_phys_segments;
+ unsigned short max_segments;
unsigned char misaligned;
unsigned char discard_misaligned;
@@ -462,6 +461,7 @@
#define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */
+#define QUEUE_FLAG_NOXMERGES 17 /* No extended merges */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
@@ -587,6 +587,8 @@
#define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
+#define blk_queue_noxmerges(q) \
+ test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
@@ -918,10 +920,27 @@
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
-extern void blk_queue_max_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
-extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
-extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
+
+/* Temporary compatibility wrapper */
+static inline void blk_queue_max_sectors(struct request_queue *q, unsigned int max)
+{
+ blk_queue_max_hw_sectors(q, max);
+}
+
+extern void blk_queue_max_segments(struct request_queue *, unsigned short);
+
+static inline void blk_queue_max_phys_segments(struct request_queue *q, unsigned short max)
+{
+ blk_queue_max_segments(q, max);
+}
+
+static inline void blk_queue_max_hw_segments(struct request_queue *q, unsigned short max)
+{
+ blk_queue_max_segments(q, max);
+}
+
+
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_max_discard_sectors(struct request_queue *q,
unsigned int max_discard_sectors);
@@ -1014,11 +1033,15 @@
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
#define SAFE_MAX_SECTORS 255
-#define BLK_DEF_MAX_SECTORS 1024
-
#define MAX_SEGMENT_SIZE 65536
-#define BLK_SEG_BOUNDARY_MASK 0xFFFFFFFFUL
+enum blk_default_limits {
+ BLK_MAX_SEGMENTS = 128,
+ BLK_SAFE_MAX_SECTORS = 255,
+ BLK_DEF_MAX_SECTORS = 1024,
+ BLK_MAX_SEGMENT_SIZE = 65536,
+ BLK_SEG_BOUNDARY_MASK = 0xFFFFFFFFUL,
+};
#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
@@ -1042,14 +1065,9 @@
return q->limits.max_hw_sectors;
}
-static inline unsigned short queue_max_hw_segments(struct request_queue *q)
+static inline unsigned short queue_max_segments(struct request_queue *q)
{
- return q->limits.max_hw_segments;
-}
-
-static inline unsigned short queue_max_phys_segments(struct request_queue *q)
-{
- return q->limits.max_phys_segments;
+ return q->limits.max_segments;
}
static inline unsigned int queue_max_segment_size(struct request_queue *q)
@@ -1110,18 +1128,13 @@
return q->limits.alignment_offset;
}
-static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset)
+static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector)
{
unsigned int granularity = max(lim->physical_block_size, lim->io_min);
+ unsigned int alignment = (sector << 9) & (granularity - 1);
- offset &= granularity - 1;
- return (granularity + lim->alignment_offset - offset) & (granularity - 1);
-}
-
-static inline int queue_sector_alignment_offset(struct request_queue *q,
- sector_t sector)
-{
- return queue_limit_alignment_offset(&q->limits, sector << 9);
+ return (granularity + lim->alignment_offset - alignment)
+ & (granularity - 1);
}
static inline int bdev_alignment_offset(struct block_device *bdev)
@@ -1145,10 +1158,8 @@
return q->limits.discard_alignment;
}
-static inline int queue_sector_discard_alignment(struct request_queue *q,
- sector_t sector)
+static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
{
- struct queue_limits *lim = &q->limits;
unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
return (lim->discard_granularity + lim->discard_alignment - alignment)
diff --git a/include/linux/cciss_defs.h b/include/linux/cciss_defs.h
new file mode 100644
index 0000000..316b670
--- /dev/null
+++ b/include/linux/cciss_defs.h
@@ -0,0 +1,130 @@
+#ifndef CCISS_DEFS_H
+#define CCISS_DEFS_H
+
+#include <linux/types.h>
+
+/* general boundary definitions */
+#define SENSEINFOBYTES 32 /* note that this value may vary
+ between host implementations */
+
+/* Command Status value */
+#define CMD_SUCCESS 0x0000
+#define CMD_TARGET_STATUS 0x0001
+#define CMD_DATA_UNDERRUN 0x0002
+#define CMD_DATA_OVERRUN 0x0003
+#define CMD_INVALID 0x0004
+#define CMD_PROTOCOL_ERR 0x0005
+#define CMD_HARDWARE_ERR 0x0006
+#define CMD_CONNECTION_LOST 0x0007
+#define CMD_ABORTED 0x0008
+#define CMD_ABORT_FAILED 0x0009
+#define CMD_UNSOLICITED_ABORT 0x000A
+#define CMD_TIMEOUT 0x000B
+#define CMD_UNABORTABLE 0x000C
+
+/* transfer direction */
+#define XFER_NONE 0x00
+#define XFER_WRITE 0x01
+#define XFER_READ 0x02
+#define XFER_RSVD 0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED 0x00
+#define ATTR_SIMPLE 0x04
+#define ATTR_HEADOFQUEUE 0x05
+#define ATTR_ORDERED 0x06
+#define ATTR_ACA 0x07
+
+/* cdb type */
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+
+/* Type defs used in the following structs */
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN 1024
+
+#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
+#define LEVEL3LUN 0
+
+#pragma pack(1)
+
+/* Command List Structure */
+typedef union _SCSI3Addr_struct {
+ struct {
+ BYTE Dev;
+ BYTE Bus:6;
+ BYTE Mode:2; /* b00 */
+ } PeripDev;
+ struct {
+ BYTE DevLSB;
+ BYTE DevMSB:6;
+ BYTE Mode:2; /* b01 */
+ } LogDev;
+ struct {
+ BYTE Dev:5;
+ BYTE Bus:3;
+ BYTE Targ:6;
+ BYTE Mode:2; /* b10 */
+ } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+ DWORD TargetId:24;
+ DWORD Bus:6;
+ DWORD Mode:2;
+ SCSI3Addr_struct Target[2]; /* 2 level target device addr */
+} PhysDevAddr_struct;
+
+typedef struct _LogDevAddr_struct {
+ DWORD VolId:30;
+ DWORD Mode:2;
+ BYTE reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+ BYTE LunAddrBytes[8];
+ SCSI3Addr_struct SCSI3Lun[4];
+ PhysDevAddr_struct PhysDev;
+ LogDevAddr_struct LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+ BYTE CDBLen;
+ struct {
+ BYTE Type:3;
+ BYTE Attribute:3;
+ BYTE Direction:2;
+ } Type;
+ HWORD Timeout;
+ BYTE CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+ struct {
+ BYTE Reserved[3];
+ BYTE Type;
+ DWORD ErrorInfo;
+ } Common_Info;
+ struct{
+ BYTE Reserved[2];
+ BYTE offense_size; /* size of offending entry */
+ BYTE offense_num; /* byte # of offense 0-base */
+ DWORD offense_value;
+ } Invalid_Cmd;
+} MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+ BYTE ScsiStatus;
+ BYTE SenseLen;
+ HWORD CommandStatus;
+ DWORD ResidualCnt;
+ MoreErrInfo_struct MoreErrInfo;
+ BYTE SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+
+#endif /* CCISS_DEFS_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index eb130b4..986493f 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -3,6 +3,7 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
#define CCISS_IOC_MAGIC 'B'
@@ -36,133 +37,6 @@
#define MAX_KMALLOC_SIZE 128000
-#ifndef CCISS_CMD_H
-// This defines are duplicated in cciss_cmd.h in the driver directory
-
-//general boundary definitions
-#define SENSEINFOBYTES 32//note that this value may vary between host implementations
-
-//Command Status value
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
-//transfer direction
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-//task attribute
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-//cdb type
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-// Type defs used in the following structs
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN 1024
-
-#define LEVEL2LUN 1 // index into Target(x) structure, due to byte swapping
-#define LEVEL3LUN 0
-
-#pragma pack(1)
-
-//Command List Structure
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; // b00
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; // b01
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; // b10
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; //2 level target device addr
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size;//size of offending entry
- BYTE offense_num; //byte # of offense 0-base
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-#endif /* CCISS_CMD_H */
-
typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 8a4a130..4bca8b6 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -154,6 +154,7 @@
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
* @flags: flags describing special properties
* @vread: vsyscall based read
+ * @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
*/
struct clocksource {
@@ -172,7 +173,8 @@
u64 max_idle_ns;
unsigned long flags;
cycle_t (*vread)(void);
- void (*resume)(void);
+ void (*suspend)(struct clocksource *cs);
+ void (*resume)(struct clocksource *cs);
#ifdef CONFIG_IA64
void *fsys_mmio; /* used by fsyscall asm code */
#define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr))
@@ -277,6 +279,7 @@
extern void clocksource_touch_watchdog(void);
extern struct clocksource* clocksource_get_next(void);
extern void clocksource_change_rating(struct clocksource *cs, int rating);
+extern void clocksource_suspend(void);
extern void clocksource_resume(void);
extern struct clocksource * __init __weak clocksource_default_clock(void);
extern void clocksource_mark_unstable(struct clocksource *cs);
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/include/linux/davinci_emac.h
similarity index 83%
rename from arch/arm/mach-davinci/include/mach/emac.h
rename to include/linux/davinci_emac.h
index beff4fb..7c930db 100644
--- a/arch/arm/mach-davinci/include/mach/emac.h
+++ b/include/linux/davinci_emac.h
@@ -8,8 +8,8 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#ifndef _MACH_DAVINCI_EMAC_H
-#define _MACH_DAVINCI_EMAC_H
+#ifndef _LINUX_DAVINCI_EMAC_H
+#define _LINUX_DAVINCI_EMAC_H
#include <linux/if_ether.h>
#include <linux/memory.h>
@@ -19,12 +19,15 @@
u32 ctrl_reg_offset;
u32 ctrl_mod_reg_offset;
u32 ctrl_ram_offset;
+ u32 hw_ram_addr;
u32 mdio_reg_offset;
u32 ctrl_ram_size;
u32 phy_mask;
u32 mdio_max_freq;
u8 rmii_en;
u8 version;
+ void (*interrupt_enable) (void);
+ void (*interrupt_disable) (void);
};
enum {
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index 1bc0854..48e68da 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -46,7 +46,6 @@
struct mutex drv_mutex; /* protects serio->drv so attributes can pin driver */
struct device dev;
- unsigned int registered; /* port has been fully registered with driver core */
struct list_head node;
};
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 1289fa7..cd0b3f3 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -10,6 +10,7 @@
int type; /* input event type (EV_KEY, EV_SW) */
int wakeup; /* configure the button as a wake-up source */
int debounce_interval; /* debounce ticks interval in msecs */
+ bool can_disable;
};
struct gpio_keys_platform_data {
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index 9eb07bb..a87124d 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -12,9 +12,8 @@
#ifndef __I2C_PNX_H__
#define __I2C_PNX_H__
-#include <linux/pm.h>
-
struct platform_device;
+struct clk;
struct i2c_pnx_mif {
int ret; /* Return value */
@@ -26,20 +25,18 @@
};
struct i2c_pnx_algo_data {
- u32 base;
- u32 ioaddr;
- int irq;
+ void __iomem *ioaddr;
struct i2c_pnx_mif mif;
int last;
+ struct clk *clk;
+ struct i2c_pnx_data *i2c_pnx;
+ struct i2c_adapter adapter;
};
struct i2c_pnx_data {
- int (*suspend) (struct platform_device *pdev, pm_message_t state);
- int (*resume) (struct platform_device *pdev);
- u32 (*calculate_input_freq) (struct platform_device *pdev);
- int (*set_clock_run) (struct platform_device *pdev);
- int (*set_clock_stop) (struct platform_device *pdev);
- struct i2c_adapter *adapter;
+ const char *name;
+ u32 base;
+ int irq;
};
#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index bf1c5be..7897f30 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -547,6 +547,10 @@
unsigned int audio_mclk;
struct twl4030_codec_audio_data *audio;
struct twl4030_codec_vibra_data *vibra;
+
+ /* twl6030 */
+ int audpwron_gpio; /* audio power-on gpio */
+ int naudint_irq; /* audio interrupt */
};
struct twl4030_platform_data {
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 4c4e57d..87018dc 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -385,7 +385,7 @@
/* defines for max_sectors and max_phys_segments */
#define I2O_MAX_SECTORS 1024
#define I2O_MAX_SECTORS_LIMITED 128
-#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
+#define I2O_MAX_PHYS_SEGMENTS BLK_MAX_SEGMENTS
/*
* Message structures
diff --git a/include/linux/input.h b/include/linux/input.h
index f44ee91..dc24eff 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -378,7 +378,7 @@
#define KEY_WIMAX 246
#define KEY_RFKILL 247 /* Key that controls all radios */
-/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
+/* Code 255 is reserved for special needs of AT keyboard driver */
#define BTN_MISC 0x100
#define BTN_0 0x100
@@ -597,6 +597,7 @@
#define KEY_NUMERIC_POUND 0x20b
#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
@@ -1242,6 +1243,10 @@
* @event: event handler. This method is being called by input core with
* interrupts disabled and dev->event_lock spinlock held and so
* it may not sleep
+ * @filter: similar to @event; separates normal event handlers from
+ * "filters".
+ * @match: called after comparing device's id with handler's id_table
+ * to perform fine-grained matching between device and handler
* @connect: called when attaching a handler to an input device
* @disconnect: disconnects a handler from input device
* @start: starts handler for given handle. This function is called by
@@ -1253,8 +1258,6 @@
* @name: name of the handler, to be shown in /proc/bus/input/handlers
* @id_table: pointer to a table of input_device_ids this driver can
* handle
- * @blacklist: pointer to a table of input_device_ids this driver should
- * ignore even if they match @id_table
* @h_list: list of input handles associated with the handler
* @node: for placing the driver onto input_handler_list
*
@@ -1263,6 +1266,11 @@
* same time. All of them will get their copy of input event generated by
* the device.
*
+ * The very same structure is used to implement input filters. Input core
+ * allows filters to run first and will not pass event to regular handlers
+ * if any of the filters indicate that the event should be filtered (by
+ * returning %true from their filter() method).
+ *
* Note that input core serializes calls to connect() and disconnect()
* methods.
*/
@@ -1271,6 +1279,8 @@
void *private;
void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+ bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+ bool (*match)(struct input_handler *handler, struct input_dev *dev);
int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
void (*disconnect)(struct input_handle *handle);
void (*start)(struct input_handle *handle);
@@ -1280,7 +1290,6 @@
const char *name;
const struct input_device_id *id_table;
- const struct input_device_id *blacklist;
struct list_head h_list;
struct list_head node;
diff --git a/include/linux/input/sh_keysc.h b/include/linux/input/sh_keysc.h
index c211b5c..649dc7f 100644
--- a/include/linux/input/sh_keysc.h
+++ b/include/linux/input/sh_keysc.h
@@ -1,14 +1,15 @@
#ifndef __SH_KEYSC_H__
#define __SH_KEYSC_H__
-#define SH_KEYSC_MAXKEYS 30
+#define SH_KEYSC_MAXKEYS 49
struct sh_keysc_info {
- enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
+ enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3,
+ SH_KEYSC_MODE_4, SH_KEYSC_MODE_5, SH_KEYSC_MODE_6 } mode;
int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
int delay;
int kycr2_delay;
- int keycodes[SH_KEYSC_MAXKEYS];
+ int keycodes[SH_KEYSC_MAXKEYS]; /* KEYIN * KEYOUT */
};
#endif /* __SH_KEYSC_H__ */
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 78ef023..1195a80 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -49,8 +49,8 @@
/*
* For request batching
*/
- unsigned long last_waited; /* Time last woken after wait for request */
int nr_batch_requests; /* Number of requests left in the batch */
+ unsigned long last_waited; /* Time last woken after wait for request */
struct radix_tree_root radix_root;
struct hlist_head cic_list;
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 451481c..d13492d 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -90,7 +90,7 @@
* @startup: start up the interrupt (defaults to ->enable if NULL)
* @shutdown: shut down the interrupt (defaults to ->disable if NULL)
* @enable: enable the interrupt (defaults to chip->unmask if NULL)
- * @disable: disable the interrupt (defaults to chip->mask if NULL)
+ * @disable: disable the interrupt
* @ack: start of a new interrupt
* @mask: mask an interrupt source
* @mask_ack: ack and mask an interrupt source
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index 8bdb16b..506ad20 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -161,7 +161,4 @@
schedule_delayed_work(&t->buf.work, 0);
}
-/* mac_hid.c */
-extern int mac_hid_mouse_emulate_buttons(int, unsigned int, int);
-
#endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7311225..f8ea71e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -857,6 +857,7 @@
unsigned int (*sff_data_xfer)(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
u8 (*sff_irq_on)(struct ata_port *);
+ bool (*sff_irq_check)(struct ata_port *);
void (*sff_irq_clear)(struct ata_port *);
void (*bmdma_setup)(struct ata_queued_cmd *qc);
@@ -1642,8 +1643,8 @@
irq_handler_t irq_handler,
struct scsi_host_template *sht);
extern int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht, void *host_priv);
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
/**
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index f46c40a..9bdd914 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -57,6 +57,7 @@
#define OMAPFB_WAITFORGO OMAP_IO(60)
#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info)
#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info)
#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
@@ -206,6 +207,14 @@
__u16 reserved2;
};
+struct omapfb_display_info {
+ __u16 xres;
+ __u16 yres;
+ __u32 width; /* phys width of the display in micrometers */
+ __u32 height; /* phys height of the display in micrometers */
+ __u32 reserved[5];
+};
+
#ifdef __KERNEL__
#include <plat/board.h>
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 76e5053..721301b 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -163,10 +163,8 @@
atomic_t attention; /* Set to non-zero when queue processing is needed */
int writing; /* Non-zero when writing, zero when reading */
spinlock_t lock; /* Protecting read/write queue manipulations */
- struct bio *read_queue;
- struct bio *read_queue_tail;
- struct bio *write_queue;
- struct bio *write_queue_tail;
+ struct bio_list read_queue;
+ struct bio_list write_queue;
sector_t last_write; /* The sector where the last write ended */
int successive_reads;
};
@@ -206,8 +204,8 @@
spinlock_t lock; /* Lock protecting state transitions and */
/* orig_bios list */
- struct bio *orig_bios; /* Original bios passed to pkt_make_request */
- struct bio *orig_bios_tail;/* that will be handled by this packet */
+ struct bio_list orig_bios; /* Original bios passed to pkt_make_request */
+ /* that will be handled by this packet */
int write_size; /* Total size of all bios in the orig_bios */
/* list, measured in number of frames */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 0eef87b5..4b1753f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -97,7 +97,7 @@
struct exec_domain;
struct futex_pi_state;
struct robust_list_head;
-struct bio;
+struct bio_list;
struct fs_struct;
struct bts_context;
struct perf_event_context;
@@ -1454,7 +1454,7 @@
void *journal_info;
/* stacked block device info */
- struct bio *bio_list, **bio_tail;
+ struct bio_list *bio_list;
/* VM state */
struct reclaim_state *reclaim_state;
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 813d26c..64b4730 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -30,7 +30,6 @@
char phys[32];
bool manual_bind;
- bool registered; /* port has been fully registered with driver core */
struct serio_device_id id;
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 94f8fae..7a082b3 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -238,9 +238,6 @@
* phase-lock loop variables
*/
extern int time_status; /* clock synchronization status bits */
-extern long time_maxerror; /* maximum error */
-extern long time_esterror; /* estimated error */
-
extern long time_adjust; /* The amount of adjtime left */
extern void ntp_init(void);
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index eaf9dff..6bb2936 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -25,6 +25,9 @@
#define USB_SUBCLASS_AUDIOSTREAMING 0x02
#define USB_SUBCLASS_MIDISTREAMING 0x03
+#define UAC_VERSION_1 0x00
+#define UAC_VERSION_2 0x20
+
/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
#define UAC_HEADER 0x01
#define UAC_INPUT_TERMINAL 0x02
@@ -32,8 +35,17 @@
#define UAC_MIXER_UNIT 0x04
#define UAC_SELECTOR_UNIT 0x05
#define UAC_FEATURE_UNIT 0x06
-#define UAC_PROCESSING_UNIT 0x07
-#define UAC_EXTENSION_UNIT 0x08
+#define UAC_PROCESSING_UNIT_V1 0x07
+#define UAC_EXTENSION_UNIT_V1 0x08
+
+/* UAC v2.0 types */
+#define UAC_EFFECT_UNIT 0x07
+#define UAC_PROCESSING_UNIT_V2 0x08
+#define UAC_EXTENSION_UNIT_V2 0x09
+#define UAC_CLOCK_SOURCE 0x0a
+#define UAC_CLOCK_SELECTOR 0x0b
+#define UAC_CLOCK_MULTIPLIER 0x0c
+#define UAC_SAMPLE_RATE_CONVERTER 0x0d
/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
#define UAC_AS_GENERAL 0x01
@@ -66,6 +78,10 @@
#define UAC_GET_STAT 0xff
+/* Audio class v2.0 handles all the parameter calls differently */
+#define UAC2_CS_CUR 0x01
+#define UAC2_CS_RANGE 0x02
+
/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
#define UAC_MS_HEADER 0x01
#define UAC_MIDI_IN_JACK 0x02
@@ -81,7 +97,7 @@
/* Terminal Control Selectors */
/* 4.3.2 Class-Specific AC Interface Descriptor */
-struct uac_ac_header_descriptor {
+struct uac_ac_header_descriptor_v1 {
__u8 bLength; /* 8 + n */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* UAC_MS_HEADER */
@@ -95,7 +111,7 @@
/* As above, but more useful for defining your own descriptors: */
#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
-struct uac_ac_header_descriptor_##n { \
+struct uac_ac_header_descriptor_v1_##n { \
__u8 bLength; \
__u8 bDescriptorType; \
__u8 bDescriptorSubtype; \
@@ -130,8 +146,12 @@
#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+/* Terminals - control selectors */
+
+#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
+
/* 4.3.2.2 Output Terminal Descriptor */
-struct uac_output_terminal_descriptor {
+struct uac_output_terminal_descriptor_v1 {
__u8 bLength; /* in bytes: 9 */
__u8 bDescriptorType; /* CS_INTERFACE descriptor type */
__u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */
@@ -171,7 +191,7 @@
} __attribute__ ((packed))
/* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac_as_header_descriptor {
+struct uac_as_header_descriptor_v1 {
__u8 bLength; /* in bytes: 7 */
__u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
__u8 bDescriptorSubtype; /* AS_GENERAL */
@@ -180,6 +200,19 @@
__le16 wFormatTag; /* The Audio Data Format */
} __attribute__ ((packed));
+struct uac_as_header_descriptor_v2 {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalLink;
+ __u8 bmControls;
+ __u8 bFormatType;
+ __u32 bmFormats;
+ __u8 bNrChannels;
+ __u32 bmChannelConfig;
+ __u8 iChannelNames;
+} __attribute__((packed));
+
#define UAC_DT_AS_HEADER_SIZE 7
/* Formats - A.1.1 Audio Data Format Type I Codes */
@@ -232,11 +265,62 @@
#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+struct uac_format_type_i_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bSubslotSize;
+ __u8 bFormatType;
+ __u8 bBitResolution;
+ __u8 bHeaderLength;
+ __u8 bControlSize;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+
+/* Formats - Audio Data Format Type I Codes */
+
+#define UAC_FORMAT_TYPE_II_MPEG 0x1001
+#define UAC_FORMAT_TYPE_II_AC3 0x1002
+
+struct uac_format_type_ii_discrete_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __le16 wMaxBitRate;
+ __le16 wSamplesPerFrame;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__((packed));
+
+struct uac_format_type_ii_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u16 wMaxBitRate;
+ __u16 wSamplesPerFrame;
+ __u8 bHeaderLength;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* type III */
+#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
+
/* Formats - A.2 Format Type Codes */
#define UAC_FORMAT_TYPE_UNDEFINED 0x0
#define UAC_FORMAT_TYPE_I 0x1
#define UAC_FORMAT_TYPE_II 0x2
#define UAC_FORMAT_TYPE_III 0x3
+#define UAC_EXT_FORMAT_TYPE_I 0x81
+#define UAC_EXT_FORMAT_TYPE_II 0x82
+#define UAC_EXT_FORMAT_TYPE_III 0x83
struct uac_iso_endpoint_descriptor {
__u8 bLength; /* in bytes: 7 */
@@ -252,7 +336,31 @@
#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
#define UAC_EP_CS_ATTR_FILL_MAX 0x80
+/* Audio class v2.0: CLOCK_SOURCE descriptor */
+
+struct uac_clock_source_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bAssocTerminal;
+ __u8 iClockSource;
+} __attribute__((packed));
+
/* A.10.2 Feature Unit Control Selectors */
+
+struct uac_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u8 bControlSize;
+ __u8 controls[0]; /* variable length */
+} __attribute__((packed));
+
#define UAC_FU_CONTROL_UNDEFINED 0x00
#define UAC_MUTE_CONTROL 0x01
#define UAC_VOLUME_CONTROL 0x02
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index d437556..5dc2f22 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -84,6 +84,9 @@
/* MUSB configuration-specific details */
struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
};
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 52bb917..fef0972 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -110,9 +110,19 @@
/* for board-specific init logic */
extern int otg_set_transceiver(struct otg_transceiver *);
+#if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE)
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
+#else
+static inline void usb_nop_xceiv_register(void)
+{
+}
+
+static inline void usb_nop_xceiv_unregister(void)
+{
+}
+#endif
/* helpers for direct access thru low-level io interface */
static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index a7df327..d74e080b 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -275,7 +275,8 @@
struct dst_entry *dst,
int nfheader_len);
int (*fill_dst)(struct xfrm_dst *xdst,
- struct net_device *dev);
+ struct net_device *dev,
+ struct flowi *fl);
};
extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo);
diff --git a/include/sound/core.h b/include/sound/core.h
index a61499c..89e0ac1 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -458,5 +458,8 @@
const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list);
+const struct snd_pci_quirk *
+snd_pci_quirk_lookup_id(u16 vendor, u16 device,
+ const struct snd_pci_quirk *list);
#endif /* __SOUND_CORE_H */
diff --git a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h
index 7c44667..49b03c9 100644
--- a/include/sound/cs46xx_dsp_spos.h
+++ b/include/sound/cs46xx_dsp_spos.h
@@ -118,9 +118,11 @@
struct snd_info_entry *proc_info;
int ref_count;
- spinlock_t lock;
- int deleted;
+ u16 volume[2];
+ unsigned int deleted :1;
+ unsigned int updated :1;
+ unsigned int volume_set :1;
};
struct dsp_task_descriptor {
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index c83a4a7..8b611a5 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -262,6 +262,8 @@
unsigned int mask;
};
+struct snd_pcm_hwptr_log;
+
struct snd_pcm_runtime {
/* -- Status -- */
struct snd_pcm_substream *trigger_master;
@@ -310,7 +312,9 @@
struct snd_pcm_mmap_control *control;
/* -- locking / scheduling -- */
- wait_queue_head_t sleep;
+ unsigned int twake: 1; /* do transfer (!poll) wakeup */
+ wait_queue_head_t sleep; /* poll sleep */
+ wait_queue_head_t tsleep; /* transfer sleep */
struct fasync_struct *fasync;
/* -- private section -- */
@@ -340,6 +344,10 @@
/* -- OSS things -- */
struct snd_pcm_oss_runtime oss;
#endif
+
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
+ struct snd_pcm_hwptr_log *hwptr_log;
+#endif
};
struct snd_pcm_group { /* keep linked substreams */
@@ -834,6 +842,8 @@
int snd_pcm_lib_interleave_len(struct snd_pcm_substream *substream);
int snd_pcm_lib_ioctl(struct snd_pcm_substream *substream,
unsigned int cmd, void *arg);
+int snd_pcm_update_state(struct snd_pcm_substream *substream,
+ struct snd_pcm_runtime *runtime);
int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream);
int snd_pcm_playback_xrun_check(struct snd_pcm_substream *substream);
int snd_pcm_capture_xrun_check(struct snd_pcm_substream *substream);
@@ -905,6 +915,44 @@
int snd_pcm_lib_malloc_pages(struct snd_pcm_substream *substream, size_t size);
int snd_pcm_lib_free_pages(struct snd_pcm_substream *substream);
+int _snd_pcm_lib_alloc_vmalloc_buffer(struct snd_pcm_substream *substream,
+ size_t size, gfp_t gfp_flags);
+int snd_pcm_lib_free_vmalloc_buffer(struct snd_pcm_substream *substream);
+struct page *snd_pcm_lib_get_vmalloc_page(struct snd_pcm_substream *substream,
+ unsigned long offset);
+#if 0 /* for kernel-doc */
+/**
+ * snd_pcm_lib_alloc_vmalloc_buffer - allocate virtual DMA buffer
+ * @substream: the substream to allocate the buffer to
+ * @size: the requested buffer size, in bytes
+ *
+ * Allocates the PCM substream buffer using vmalloc(), i.e., the memory is
+ * contiguous in kernel virtual space, but not in physical memory. Use this
+ * if the buffer is accessed by kernel code but not by device DMA.
+ *
+ * Returns 1 if the buffer was changed, 0 if not changed, or a negative error
+ * code.
+ */
+static int snd_pcm_lib_alloc_vmalloc_buffer
+ (struct snd_pcm_substream *substream, size_t size);
+/**
+ * snd_pcm_lib_alloc_vmalloc_32_buffer - allocate 32-bit-addressable buffer
+ * @substream: the substream to allocate the buffer to
+ * @size: the requested buffer size, in bytes
+ *
+ * This function works like snd_pcm_lib_alloc_vmalloc_buffer(), but uses
+ * vmalloc_32(), i.e., the pages are allocated from 32-bit-addressable memory.
+ */
+static int snd_pcm_lib_alloc_vmalloc_32_buffer
+ (struct snd_pcm_substream *substream, size_t size);
+#endif
+#define snd_pcm_lib_alloc_vmalloc_buffer(subs, size) \
+ _snd_pcm_lib_alloc_vmalloc_buffer \
+ (subs, size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO)
+#define snd_pcm_lib_alloc_vmalloc_32_buffer(subs, size) \
+ _snd_pcm_lib_alloc_vmalloc_buffer \
+ (subs, size, GFP_KERNEL | GFP_DMA32 | __GFP_ZERO)
+
#ifdef CONFIG_SND_DMA_SGBUF
/*
* SG-buffer handling
@@ -975,6 +1023,10 @@
#define snd_pcm_lib_mmap_iomem NULL
#endif
+int snd_pcm_lib_mmap_noncached(struct snd_pcm_substream *substream,
+ struct vm_area_struct *area);
+#define snd_pcm_lib_mmap_vmalloc snd_pcm_lib_mmap_noncached
+
static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max)
{
*max = dma < 4 ? 64 * 1024 : 128 * 1024;
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
index cc4e226..760c969 100644
--- a/include/sound/pcm_oss.h
+++ b/include/sound/pcm_oss.h
@@ -61,7 +61,7 @@
struct snd_pcm_plugin *plugin_first;
struct snd_pcm_plugin *plugin_last;
#endif
- unsigned int prev_hw_ptr_interrupt;
+ unsigned int prev_hw_ptr_period;
};
struct snd_pcm_oss_file {
diff --git a/include/sound/sb.h b/include/sound/sb.h
index 4e62ee1..9535354 100644
--- a/include/sound/sb.h
+++ b/include/sound/sb.h
@@ -33,6 +33,7 @@
SB_HW_20,
SB_HW_201,
SB_HW_PRO,
+ SB_HW_JAZZ16, /* Media Vision Jazz16 */
SB_HW_16,
SB_HW_16CSP, /* SB16 with CSP chip */
SB_HW_ALS100, /* Avance Logic ALS100 chip */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index ca24e7f..061f16d 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -16,6 +16,8 @@
#include <linux/list.h>
+#include <sound/soc.h>
+
struct snd_pcm_substream;
/*
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c5c95e1d..c0922a0 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -95,6 +95,21 @@
.shift = wshift, .invert = winvert, .kcontrols = wcontrols, \
.num_kcontrols = 1}
+/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
+#define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\
+ wcontrols) \
+{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
+#define SOC_MIXER_ARRAY(wname, wreg, wshift, winvert, \
+ wcontrols)\
+{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
+#define SOC_MIXER_NAMED_CTL_ARRAY(wname, wreg, wshift, winvert, \
+ wcontrols)\
+{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
+ .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \
+ .num_kcontrols = ARRAY_SIZE(wcontrols)}
+
/* path domain with event - event handler must return 0 for success */
#define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
@@ -126,6 +141,23 @@
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \
.event = wevent, .event_flags = wflags}
+/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
+#define SOC_PGA_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
+ wevent, wflags) \
+{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
+ .event = wevent, .event_flags = wflags}
+#define SOC_MIXER_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
+ wevent, wflags) \
+{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
+ .event = wevent, .event_flags = wflags}
+#define SOC_MIXER_NAMED_CTL_E_ARRAY(wname, wreg, wshift, winvert, \
+ wcontrols, wevent, wflags) \
+{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, \
+ .num_kcontrols = ARRAY_SIZE(wcontrols), .event = wevent, .event_flags = wflags}
+
/* events that are pre and post DAPM */
#define SND_SOC_DAPM_PRE(wname, wevent) \
{ .id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 0d7718f9..5d234a8 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -169,6 +169,23 @@
.private_value = (unsigned long)&xenum }
/*
+ * Simplified versions of above macros, declaring a struct and calculating
+ * ARRAY_SIZE internally
+ */
+#define SOC_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xtexts) \
+ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
+ ARRAY_SIZE(xtexts), xtexts)
+#define SOC_ENUM_SINGLE_DECL(name, xreg, xshift, xtexts) \
+ SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
+#define SOC_ENUM_SINGLE_EXT_DECL(name, xtexts) \
+ struct soc_enum name = SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(xtexts), xtexts)
+#define SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xmask, xtexts, xvalues) \
+ struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, \
+ ARRAY_SIZE(xtexts), xtexts, xvalues)
+#define SOC_VALUE_ENUM_SINGLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \
+ SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xmask, xtexts, xvalues)
+
+/*
* Bias levels
*
* @ON: Bias is fully on for audio playback and capture operations.
@@ -253,6 +270,9 @@
/* codec register bit access */
int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
unsigned int mask, unsigned int value);
+int snd_soc_update_bits_locked(struct snd_soc_codec *codec,
+ unsigned short reg, unsigned int mask,
+ unsigned int value);
int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
unsigned int mask, unsigned int value);
@@ -402,6 +422,10 @@
short reg_cache_size;
short reg_cache_step;
+ unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */
+ unsigned int cache_only:1; /* Suppress writes to hardware */
+ unsigned int cache_sync:1; /* Cache needs to be synced to hardware */
+
/* dapm */
u32 pop_time;
struct list_head dapm_widgets;
@@ -497,6 +521,8 @@
int (*set_bias_level)(struct snd_soc_card *,
enum snd_soc_bias_level level);
+ long pmdown_time;
+
/* CPU <--> Codec DAI links */
struct snd_soc_dai_link *dai_link;
int num_links;
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h
index 5858d06..ac06652 100644
--- a/include/sound/tlv320dac33-plat.h
+++ b/include/sound/tlv320dac33-plat.h
@@ -15,6 +15,7 @@
struct tlv320dac33_platform_data {
int power_gpio;
+ u8 burst_bclkdiv;
};
#endif /* __TLV320DAC33_PLAT_H */
diff --git a/include/sound/tpa6130a2-plat.h b/include/sound/tpa6130a2-plat.h
index e8c901e..e29fde6 100644
--- a/include/sound/tpa6130a2-plat.h
+++ b/include/sound/tpa6130a2-plat.h
@@ -23,7 +23,13 @@
#ifndef TPA6130A2_PLAT_H
#define TPA6130A2_PLAT_H
+enum tpa_model {
+ TPA6130A2,
+ TPA6140A2,
+};
+
struct tpa6130a2_platform_data {
+ enum tpa_model id;
int power_gpio;
};
diff --git a/include/sound/version.h b/include/sound/version.h
index 2293914..7fed234 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.21"
+#define CONFIG_SND_VERSION "1.0.22.1"
#define CONFIG_SND_DATE ""
diff --git a/include/sound/wm2000.h b/include/sound/wm2000.h
new file mode 100644
index 0000000..aa388ca
--- /dev/null
+++ b/include/sound/wm2000.h
@@ -0,0 +1,26 @@
+/*
+ * linux/sound/wm2000.h -- Platform data for WM2000
+ *
+ * Copyright 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM2000_H
+#define __LINUX_SND_WM2000_H
+
+struct wm2000_platform_data {
+ /** Filename for system-specific image to download to device. */
+ const char *download_file;
+
+ /** Divide MCLK by 2 for system clock? */
+ unsigned int mclkdiv2:1;
+
+ /** Disable speech clarity enhancement, for use when an
+ * external algorithm is used. */
+ unsigned int speech_enh_disable:1;
+};
+
+#endif
diff --git a/include/sound/wm8904.h b/include/sound/wm8904.h
new file mode 100644
index 0000000..d66575a
--- /dev/null
+++ b/include/sound/wm8904.h
@@ -0,0 +1,57 @@
+/*
+ * Platform data for WM8904
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_PDATA_H__
+#define __MFD_WM8994_PDATA_H__
+
+#define WM8904_DRC_REGS 4
+#define WM8904_EQ_REGS 25
+
+/**
+ * DRC configurations are specified with a label and a set of register
+ * values to write (the enable bits will be ignored). At runtime an
+ * enumerated control will be presented for each DRC block allowing
+ * the user to choose the configration to use.
+ *
+ * Configurations may be generated by hand or by using the DRC control
+ * panel provided by the WISCE - see http://www.wolfsonmicro.com/wisce/
+ * for details.
+ */
+struct wm8904_drc_cfg {
+ const char *name;
+ u16 regs[WM8904_DRC_REGS];
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8904_retune_mobile_cfg {
+ const char *name;
+ unsigned int rate;
+ u16 regs[WM8904_EQ_REGS];
+};
+
+struct wm8904_pdata {
+ int num_drc_cfgs;
+ struct wm8904_drc_cfg *drc_cfgs;
+
+ int num_retune_mobile_cfgs;
+ struct wm8904_retune_mobile_cfg *retune_mobile_cfgs;
+};
+
+#endif
diff --git a/include/sound/wm8955.h b/include/sound/wm8955.h
new file mode 100644
index 0000000..5074ef4
--- /dev/null
+++ b/include/sound/wm8955.h
@@ -0,0 +1,26 @@
+/*
+ * Platform data for WM8955
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __WM8955_PDATA_H__
+#define __WM8955_PDATA_H__
+
+struct wm8955_pdata {
+ /* Configure LOUT2/ROUT2 to drive a speaker */
+ unsigned int out2_speaker:1;
+
+ /* Configure MONOIN+/- in differential mode */
+ unsigned int monoin_diff:1;
+};
+
+#endif
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 2357165..d49afb2 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -146,7 +146,7 @@
struct task_struct *p;
ret = -ESRCH;
- read_lock(&tasklist_lock);
+ rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p)
goto err_unlock;
@@ -157,7 +157,7 @@
!capable(CAP_SYS_PTRACE))
goto err_unlock;
head = p->compat_robust_list;
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
}
if (put_user(sizeof(*head), len_ptr))
@@ -165,7 +165,7 @@
return put_user(ptr_to_compat(head), head_ptr);
err_unlock:
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return ret;
}
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 4954407..00d1fda 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -256,7 +256,7 @@
return 0;
}
-int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp)
+static int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp)
{
*tp = ktime_to_timespec(KTIME_LOW_RES);
return 0;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8a68b24..33e7a38 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1441,7 +1441,7 @@
};
static struct ctl_table debug_table[] = {
-#if defined(CONFIG_X86) || defined(CONFIG_PPC)
+#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_SPARC)
{
.procname = "exception-trace",
.data = &show_unhandled_signals,
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1370083..1f663d2 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -453,6 +453,18 @@
#endif /* CONFIG_CLOCKSOURCE_WATCHDOG */
/**
+ * clocksource_suspend - suspend the clocksource(s)
+ */
+void clocksource_suspend(void)
+{
+ struct clocksource *cs;
+
+ list_for_each_entry_reverse(cs, &clocksource_list, list)
+ if (cs->suspend)
+ cs->suspend(cs);
+}
+
+/**
* clocksource_resume - resume the clocksource(s)
*/
void clocksource_resume(void)
@@ -461,7 +473,7 @@
list_for_each_entry(cs, &clocksource_list, list)
if (cs->resume)
- cs->resume();
+ cs->resume(cs);
clocksource_resume_watchdog();
}
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 4800f93..7c0f180 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -58,10 +58,10 @@
static long time_constant = 2;
/* maximum error (usecs): */
-long time_maxerror = NTP_PHASE_LIMIT;
+static long time_maxerror = NTP_PHASE_LIMIT;
/* estimated error (usecs): */
-long time_esterror = NTP_PHASE_LIMIT;
+static long time_esterror = NTP_PHASE_LIMIT;
/* frequency offset (scaled nsecs/secs): */
static s64 time_freq;
@@ -142,11 +142,11 @@
* Select how the frequency is to be controlled
* and in which mode (PLL or FLL).
*/
- secs = xtime.tv_sec - time_reftime;
+ secs = get_seconds() - time_reftime;
if (unlikely(time_status & STA_FREQHOLD))
secs = 0;
- time_reftime = xtime.tv_sec;
+ time_reftime = get_seconds();
offset64 = offset;
freq_adj = (offset64 * secs) <<
@@ -368,7 +368,7 @@
* reference time to current time.
*/
if (!(time_status & STA_PLL) && (txc->status & STA_PLL))
- time_reftime = xtime.tv_sec;
+ time_reftime = get_seconds();
/* only set allowed bits */
time_status &= STA_RONLY;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e2ab064..1673637 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -622,6 +622,7 @@
write_sequnlock_irqrestore(&xtime_lock, flags);
clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
+ clocksource_suspend();
return 0;
}
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index d9d6206..07f945a9 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -540,9 +540,10 @@
if (ret)
return ret;
- if (copy_to_user(arg, &buts, sizeof(buts)))
+ if (copy_to_user(arg, &buts, sizeof(buts))) {
+ blk_trace_remove(q);
return -EFAULT;
-
+ }
return 0;
}
EXPORT_SYMBOL_GPL(blk_trace_setup);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2d16fa6..3a5aeb3 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2087,7 +2087,7 @@
entry = pte_mkwrite(pte_mkdirty(huge_ptep_get(ptep)));
if (huge_ptep_set_access_flags(vma, address, ptep, entry, 1)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
}
}
@@ -2558,7 +2558,7 @@
entry = pte_mkyoung(entry);
if (huge_ptep_set_access_flags(vma, address, ptep, entry,
flags & FAULT_FLAG_WRITE))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, ptep);
out_page_table_lock:
spin_unlock(&mm->page_table_lock);
diff --git a/mm/memory.c b/mm/memory.c
index 09e4b1b..72fb5f3 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1593,7 +1593,7 @@
/* Ok, finally just insert the thing.. */
entry = pte_mkspecial(pfn_pte(pfn, prot));
set_pte_at(mm, addr, pte, entry);
- update_mmu_cache(vma, addr, entry); /* XXX: why not for insert_page? */
+ update_mmu_cache(vma, addr, pte); /* XXX: why not for insert_page? */
retval = 0;
out_unlock:
@@ -2116,7 +2116,7 @@
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
if (ptep_set_access_flags(vma, address, page_table, entry,1))
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
ret |= VM_FAULT_WRITE;
goto unlock;
}
@@ -2185,7 +2185,7 @@
* new page to be mapped directly into the secondary page table.
*/
set_pte_at_notify(mm, address, page_table, entry);
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
if (old_page) {
/*
* Only after switching the pte to the new page may
@@ -2629,7 +2629,7 @@
}
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, pte);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
out:
@@ -2694,7 +2694,7 @@
set_pte_at(mm, address, page_table, entry);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
unlock:
pte_unmap_unlock(page_table, ptl);
return 0;
@@ -2855,7 +2855,7 @@
set_pte_at(mm, address, page_table, entry);
/* no need to invalidate: a not-present page won't be cached */
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, page_table);
} else {
if (charged)
mem_cgroup_uncharge_page(page);
@@ -2992,7 +2992,7 @@
}
entry = pte_mkyoung(entry);
if (ptep_set_access_flags(vma, address, pte, entry, flags & FAULT_FLAG_WRITE)) {
- update_mmu_cache(vma, address, entry);
+ update_mmu_cache(vma, address, pte);
} else {
/*
* This is needed only for protection faults but the arch code
diff --git a/mm/migrate.c b/mm/migrate.c
index 880bd59..edb6101 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -134,7 +134,7 @@
page_add_file_rmap(new);
/* No need to invalidate - it was non-present before */
- update_mmu_cache(vma, addr, pte);
+ update_mmu_cache(vma, addr, ptep);
unlock:
pte_unmap_unlock(ptep, ptl);
out:
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 1a79a6c..cafb55b 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -405,20 +406,11 @@
.release = bt_host_release,
};
-static int inquiry_cache_open(struct inode *inode, struct file *file)
+static int inquiry_cache_show(struct seq_file *f, void *p)
{
- file->private_data = inode->i_private;
- return 0;
-}
-
-static ssize_t inquiry_cache_read(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct hci_dev *hdev = file->private_data;
+ struct hci_dev *hdev = f->private;
struct inquiry_cache *cache = &hdev->inq_cache;
struct inquiry_entry *e;
- char buf[4096];
- int n = 0;
hci_dev_lock_bh(hdev);
@@ -426,23 +418,30 @@
struct inquiry_data *data = &e->data;
bdaddr_t bdaddr;
baswap(&bdaddr, &data->bdaddr);
- n += sprintf(buf + n, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
- batostr(&bdaddr),
- data->pscan_rep_mode, data->pscan_period_mode,
- data->pscan_mode, data->dev_class[2],
- data->dev_class[1], data->dev_class[0],
- __le16_to_cpu(data->clock_offset),
- data->rssi, data->ssp_mode, e->timestamp);
+ seq_printf(f, "%s %d %d %d 0x%.2x%.2x%.2x 0x%.4x %d %d %u\n",
+ batostr(&bdaddr),
+ data->pscan_rep_mode, data->pscan_period_mode,
+ data->pscan_mode, data->dev_class[2],
+ data->dev_class[1], data->dev_class[0],
+ __le16_to_cpu(data->clock_offset),
+ data->rssi, data->ssp_mode, e->timestamp);
}
hci_dev_unlock_bh(hdev);
- return simple_read_from_buffer(userbuf, count, ppos, buf, n);
+ return 0;
+}
+
+static int inquiry_cache_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, inquiry_cache_show, inode->i_private);
}
static const struct file_operations inquiry_cache_fops = {
- .open = inquiry_cache_open,
- .read = inquiry_cache_read,
+ .open = inquiry_cache_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
};
int hci_register_sysfs(struct hci_dev *hdev)
diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig
index 19a6b96..d115d5c 100644
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
@@ -35,6 +35,7 @@
config BRIDGE_IGMP_SNOOPING
bool "IGMP snooping"
depends on BRIDGE
+ depends on INET
default y
---help---
If you say Y here, then the Ethernet bridge will be able selectively
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 67107d6..e4a1483 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -91,11 +91,12 @@
return 0;
}
-static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+ struct flowi *fl)
{
struct rtable *rt = (struct rtable *)xdst->route;
- xdst->u.rt.fl = rt->fl;
+ xdst->u.rt.fl = *fl;
xdst->u.dst.dev = dev;
dev_hold(dev);
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index dbdc696..ae18165 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -116,7 +116,8 @@
return 0;
}
-static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+ struct flowi *fl)
{
struct rt6_info *rt = (struct rt6_info*)xdst->route;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 031a5e6..1612d41 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1688,6 +1688,8 @@
{
switch (i->type) {
case PACKET_MR_MULTICAST:
+ if (i->alen != dev->addr_len)
+ return -EINVAL;
if (what > 0)
return dev_mc_add(dev, i->addr, i->alen, 0);
else
@@ -1700,6 +1702,8 @@
return dev_set_allmulti(dev, what);
break;
case PACKET_MR_UNICAST:
+ if (i->alen != dev->addr_len)
+ return -EINVAL;
if (what > 0)
return dev_unicast_add(dev, i->addr);
else
@@ -1734,7 +1738,7 @@
goto done;
err = -EINVAL;
- if (mreq->mr_alen != dev->addr_len)
+ if (mreq->mr_alen > dev->addr_len)
goto done;
err = -ENOBUFS;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 34a5ef8..843e066 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1372,7 +1372,8 @@
return err;
}
-static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev)
+static inline int xfrm_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
+ struct flowi *fl)
{
struct xfrm_policy_afinfo *afinfo =
xfrm_policy_get_afinfo(xdst->u.dst.ops->family);
@@ -1381,7 +1382,7 @@
if (!afinfo)
return -EINVAL;
- err = afinfo->fill_dst(xdst, dev);
+ err = afinfo->fill_dst(xdst, dev, fl);
xfrm_policy_put_afinfo(afinfo);
@@ -1486,7 +1487,7 @@
for (dst_prev = dst0; dst_prev != dst; dst_prev = dst_prev->child) {
struct xfrm_dst *xdst = (struct xfrm_dst *)dst_prev;
- err = xfrm_fill_dst(xdst, dev);
+ err = xfrm_fill_dst(xdst, dev, fl);
if (err)
goto free_dst;
diff --git a/sound/core/control.c b/sound/core/control.c
index 268ab74..439ce64 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -237,8 +237,9 @@
access = ncontrol->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
(ncontrol->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
SNDRV_CTL_ELEM_ACCESS_INACTIVE|
- SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE|
- SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK));
+ SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE|
+ SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND|
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK));
kctl.info = ncontrol->info;
kctl.get = ncontrol->get;
kctl.put = ncontrol->put;
@@ -1099,7 +1100,7 @@
if (copy_from_user(&tlv, _tlv, sizeof(tlv)))
return -EFAULT;
- if (tlv.length < sizeof(unsigned int) * 3)
+ if (tlv.length < sizeof(unsigned int) * 2)
return -EINVAL;
down_read(&card->controls_rwsem);
kctl = snd_ctl_find_numid(card, tlv.numid);
diff --git a/sound/core/misc.c b/sound/core/misc.c
index 23a032c..3da4f92 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -101,6 +101,35 @@
#ifdef CONFIG_PCI
#include <linux/pci.h>
/**
+ * snd_pci_quirk_lookup_id - look up a PCI SSID quirk list
+ * @vendor: PCI SSV id
+ * @device: PCI SSD id
+ * @list: quirk list, terminated by a null entry
+ *
+ * Look through the given quirk list and finds a matching entry
+ * with the same PCI SSID. When subdevice is 0, all subdevice
+ * values may match.
+ *
+ * Returns the matched entry pointer, or NULL if nothing matched.
+ */
+const struct snd_pci_quirk *
+snd_pci_quirk_lookup_id(u16 vendor, u16 device,
+ const struct snd_pci_quirk *list)
+{
+ const struct snd_pci_quirk *q;
+
+ for (q = list; q->subvendor; q++) {
+ if (q->subvendor != vendor)
+ continue;
+ if (!q->subdevice ||
+ (device & q->subdevice_mask) == q->subdevice)
+ return q;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(snd_pci_quirk_lookup_id);
+
+/**
* snd_pci_quirk_lookup - look up a PCI SSID quirk list
* @pci: pci_dev handle
* @list: quirk list, terminated by a null entry
@@ -114,16 +143,9 @@
const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list)
{
- const struct snd_pci_quirk *q;
-
- for (q = list; q->subvendor; q++) {
- if (q->subvendor != pci->subsystem_vendor)
- continue;
- if (!q->subdevice ||
- (pci->subsystem_device & q->subdevice_mask) == q->subdevice)
- return q;
- }
- return NULL;
+ return snd_pci_quirk_lookup_id(pci->subsystem_vendor,
+ pci->subsystem_device,
+ list);
}
EXPORT_SYMBOL(snd_pci_quirk_lookup);
#endif
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index d9c9635..82d4e33 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -632,6 +632,12 @@
return bytes_to_frames(runtime, (buffer_size * bytes) / runtime->oss.buffer_bytes);
}
+static inline
+snd_pcm_uframes_t get_hw_ptr_period(struct snd_pcm_runtime *runtime)
+{
+ return runtime->hw_ptr_interrupt;
+}
+
/* define extended formats in the recent OSS versions (if any) */
/* linear formats */
#define AFMT_S32_LE 0x00001000
@@ -1102,7 +1108,7 @@
return err;
}
runtime->oss.prepare = 0;
- runtime->oss.prev_hw_ptr_interrupt = 0;
+ runtime->oss.prev_hw_ptr_period = 0;
runtime->oss.period_ptr = 0;
runtime->oss.buffer_used = 0;
@@ -1950,7 +1956,8 @@
return result;
}
-static void snd_pcm_oss_simulate_fill(struct snd_pcm_substream *substream, snd_pcm_uframes_t hw_ptr)
+static void snd_pcm_oss_simulate_fill(struct snd_pcm_substream *substream,
+ snd_pcm_uframes_t hw_ptr)
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t appl_ptr;
@@ -1986,7 +1993,8 @@
if (runtime->oss.trigger)
goto _skip1;
if (atomic_read(&psubstream->mmap_count))
- snd_pcm_oss_simulate_fill(psubstream, runtime->hw_ptr_interrupt);
+ snd_pcm_oss_simulate_fill(psubstream,
+ get_hw_ptr_period(runtime));
runtime->oss.trigger = 1;
runtime->start_threshold = 1;
cmd = SNDRV_PCM_IOCTL_START;
@@ -2105,11 +2113,12 @@
info.ptr = snd_pcm_oss_bytes(substream, runtime->status->hw_ptr % runtime->buffer_size);
if (atomic_read(&substream->mmap_count)) {
snd_pcm_sframes_t n;
- n = (delay = runtime->hw_ptr_interrupt) - runtime->oss.prev_hw_ptr_interrupt;
+ delay = get_hw_ptr_period(runtime);
+ n = delay - runtime->oss.prev_hw_ptr_period;
if (n < 0)
n += runtime->boundary;
info.blocks = n / runtime->period_size;
- runtime->oss.prev_hw_ptr_interrupt = delay;
+ runtime->oss.prev_hw_ptr_period = delay;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
snd_pcm_oss_simulate_fill(substream, delay);
info.bytes = snd_pcm_oss_bytes(substream, runtime->status->hw_ptr) & INT_MAX;
@@ -2673,18 +2682,22 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
if (atomic_read(&substream->mmap_count))
- return runtime->oss.prev_hw_ptr_interrupt != runtime->hw_ptr_interrupt;
+ return runtime->oss.prev_hw_ptr_period !=
+ get_hw_ptr_period(runtime);
else
- return snd_pcm_playback_avail(runtime) >= runtime->oss.period_frames;
+ return snd_pcm_playback_avail(runtime) >=
+ runtime->oss.period_frames;
}
static int snd_pcm_oss_capture_ready(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
if (atomic_read(&substream->mmap_count))
- return runtime->oss.prev_hw_ptr_interrupt != runtime->hw_ptr_interrupt;
+ return runtime->oss.prev_hw_ptr_period !=
+ get_hw_ptr_period(runtime);
else
- return snd_pcm_capture_avail(runtime) >= runtime->oss.period_frames;
+ return snd_pcm_capture_avail(runtime) >=
+ runtime->oss.period_frames;
}
static unsigned int snd_pcm_oss_poll(struct file *file, poll_table * wait)
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 6884ae0..0d428d0 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -894,6 +894,7 @@
memset((void*)runtime->control, 0, size);
init_waitqueue_head(&runtime->sleep);
+ init_waitqueue_head(&runtime->tsleep);
runtime->status->state = SNDRV_PCM_STATE_OPEN;
@@ -921,6 +922,10 @@
snd_free_pages((void*)runtime->control,
PAGE_ALIGN(sizeof(struct snd_pcm_mmap_control)));
kfree(runtime->hw_constraints.rules);
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
+ if (runtime->hwptr_log)
+ kfree(runtime->hwptr_log);
+#endif
kfree(runtime);
substream->runtime = NULL;
put_pid(substream->pid);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a27545b2..b546ac2 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -126,17 +126,6 @@
}
}
-#ifdef CONFIG_SND_PCM_XRUN_DEBUG
-#define xrun_debug(substream, mask) ((substream)->pstr->xrun_debug & (mask))
-#else
-#define xrun_debug(substream, mask) 0
-#endif
-
-#define dump_stack_on_xrun(substream) do { \
- if (xrun_debug(substream, 2)) \
- dump_stack(); \
- } while (0)
-
static void pcm_debug_name(struct snd_pcm_substream *substream,
char *name, size_t len)
{
@@ -147,6 +136,24 @@
substream->number);
}
+#define XRUN_DEBUG_BASIC (1<<0)
+#define XRUN_DEBUG_STACK (1<<1) /* dump also stack */
+#define XRUN_DEBUG_JIFFIESCHECK (1<<2) /* do jiffies check */
+#define XRUN_DEBUG_PERIODUPDATE (1<<3) /* full period update info */
+#define XRUN_DEBUG_HWPTRUPDATE (1<<4) /* full hwptr update info */
+#define XRUN_DEBUG_LOG (1<<5) /* show last 10 positions on err */
+#define XRUN_DEBUG_LOGONCE (1<<6) /* do above only once */
+
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
+
+#define xrun_debug(substream, mask) \
+ ((substream)->pstr->xrun_debug & (mask))
+
+#define dump_stack_on_xrun(substream) do { \
+ if (xrun_debug(substream, XRUN_DEBUG_STACK)) \
+ dump_stack(); \
+ } while (0)
+
static void xrun(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -154,7 +161,7 @@
if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- if (xrun_debug(substream, 1)) {
+ if (xrun_debug(substream, XRUN_DEBUG_BASIC)) {
char name[16];
pcm_debug_name(substream, name, sizeof(name));
snd_printd(KERN_DEBUG "XRUN: %s\n", name);
@@ -162,32 +169,102 @@
}
}
-static snd_pcm_uframes_t
-snd_pcm_update_hw_ptr_pos(struct snd_pcm_substream *substream,
- struct snd_pcm_runtime *runtime)
-{
- snd_pcm_uframes_t pos;
+#define hw_ptr_error(substream, fmt, args...) \
+ do { \
+ if (xrun_debug(substream, XRUN_DEBUG_BASIC)) { \
+ xrun_log_show(substream); \
+ if (printk_ratelimit()) { \
+ snd_printd("PCM: " fmt, ##args); \
+ } \
+ dump_stack_on_xrun(substream); \
+ } \
+ } while (0)
- pos = substream->ops->pointer(substream);
- if (pos == SNDRV_PCM_POS_XRUN)
- return pos; /* XRUN */
- if (pos >= runtime->buffer_size) {
- if (printk_ratelimit()) {
- char name[16];
- pcm_debug_name(substream, name, sizeof(name));
- snd_printd(KERN_ERR "BUG: %s, pos = 0x%lx, "
- "buffer size = 0x%lx, period size = 0x%lx\n",
- name, pos, runtime->buffer_size,
- runtime->period_size);
- }
- pos = 0;
+#define XRUN_LOG_CNT 10
+
+struct hwptr_log_entry {
+ unsigned long jiffies;
+ snd_pcm_uframes_t pos;
+ snd_pcm_uframes_t period_size;
+ snd_pcm_uframes_t buffer_size;
+ snd_pcm_uframes_t old_hw_ptr;
+ snd_pcm_uframes_t hw_ptr_base;
+};
+
+struct snd_pcm_hwptr_log {
+ unsigned int idx;
+ unsigned int hit: 1;
+ struct hwptr_log_entry entries[XRUN_LOG_CNT];
+};
+
+static void xrun_log(struct snd_pcm_substream *substream,
+ snd_pcm_uframes_t pos)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_pcm_hwptr_log *log = runtime->hwptr_log;
+ struct hwptr_log_entry *entry;
+
+ if (log == NULL) {
+ log = kzalloc(sizeof(*log), GFP_ATOMIC);
+ if (log == NULL)
+ return;
+ runtime->hwptr_log = log;
+ } else {
+ if (xrun_debug(substream, XRUN_DEBUG_LOGONCE) && log->hit)
+ return;
}
- pos -= pos % runtime->min_align;
- return pos;
+ entry = &log->entries[log->idx];
+ entry->jiffies = jiffies;
+ entry->pos = pos;
+ entry->period_size = runtime->period_size;
+ entry->buffer_size = runtime->buffer_size;;
+ entry->old_hw_ptr = runtime->status->hw_ptr;
+ entry->hw_ptr_base = runtime->hw_ptr_base;
+ log->idx = (log->idx + 1) % XRUN_LOG_CNT;
}
-static int snd_pcm_update_hw_ptr_post(struct snd_pcm_substream *substream,
- struct snd_pcm_runtime *runtime)
+static void xrun_log_show(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_hwptr_log *log = substream->runtime->hwptr_log;
+ struct hwptr_log_entry *entry;
+ char name[16];
+ unsigned int idx;
+ int cnt;
+
+ if (log == NULL)
+ return;
+ if (xrun_debug(substream, XRUN_DEBUG_LOGONCE) && log->hit)
+ return;
+ pcm_debug_name(substream, name, sizeof(name));
+ for (cnt = 0, idx = log->idx; cnt < XRUN_LOG_CNT; cnt++) {
+ entry = &log->entries[idx];
+ if (entry->period_size == 0)
+ break;
+ snd_printd("hwptr log: %s: j=%lu, pos=%ld/%ld/%ld, "
+ "hwptr=%ld/%ld\n",
+ name, entry->jiffies, (unsigned long)entry->pos,
+ (unsigned long)entry->period_size,
+ (unsigned long)entry->buffer_size,
+ (unsigned long)entry->old_hw_ptr,
+ (unsigned long)entry->hw_ptr_base);
+ idx++;
+ idx %= XRUN_LOG_CNT;
+ }
+ log->hit = 1;
+}
+
+#else /* ! CONFIG_SND_PCM_XRUN_DEBUG */
+
+#define xrun_debug(substream, mask) 0
+#define xrun(substream) do { } while (0)
+#define hw_ptr_error(substream, fmt, args...) do { } while (0)
+#define xrun_log(substream, pos) do { } while (0)
+#define xrun_log_show(substream) do { } while (0)
+
+#endif
+
+int snd_pcm_update_state(struct snd_pcm_substream *substream,
+ struct snd_pcm_runtime *runtime)
{
snd_pcm_uframes_t avail;
@@ -209,88 +286,94 @@
}
}
if (avail >= runtime->control->avail_min)
- wake_up(&runtime->sleep);
+ wake_up(runtime->twake ? &runtime->tsleep : &runtime->sleep);
return 0;
}
-#define hw_ptr_error(substream, fmt, args...) \
- do { \
- if (xrun_debug(substream, 1)) { \
- if (printk_ratelimit()) { \
- snd_printd("PCM: " fmt, ##args); \
- } \
- dump_stack_on_xrun(substream); \
- } \
- } while (0)
-
-static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
+static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream,
+ unsigned int in_interrupt)
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t pos;
- snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+ snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
snd_pcm_sframes_t hdelta, delta;
unsigned long jdelta;
old_hw_ptr = runtime->status->hw_ptr;
- pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
+ pos = substream->ops->pointer(substream);
if (pos == SNDRV_PCM_POS_XRUN) {
xrun(substream);
return -EPIPE;
}
- if (xrun_debug(substream, 8)) {
- char name[16];
- pcm_debug_name(substream, name, sizeof(name));
- snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
- "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
- name, (unsigned int)pos,
- (unsigned int)runtime->period_size,
- (unsigned int)runtime->buffer_size,
- (unsigned long)old_hw_ptr,
- (unsigned long)runtime->hw_ptr_base,
- (unsigned long)runtime->hw_ptr_interrupt);
+ if (pos >= runtime->buffer_size) {
+ if (printk_ratelimit()) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ xrun_log_show(substream);
+ snd_printd(KERN_ERR "BUG: %s, pos = %ld, "
+ "buffer size = %ld, period size = %ld\n",
+ name, pos, runtime->buffer_size,
+ runtime->period_size);
+ }
+ pos = 0;
}
+ pos -= pos % runtime->min_align;
+ if (xrun_debug(substream, XRUN_DEBUG_LOG))
+ xrun_log(substream, pos);
hw_base = runtime->hw_ptr_base;
new_hw_ptr = hw_base + pos;
- hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
- delta = new_hw_ptr - hw_ptr_interrupt;
- if (hw_ptr_interrupt >= runtime->boundary) {
- hw_ptr_interrupt -= runtime->boundary;
- if (hw_base < runtime->boundary / 2)
- /* hw_base was already lapped; recalc delta */
- delta = new_hw_ptr - hw_ptr_interrupt;
- }
- if (delta < 0) {
- if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
- delta += runtime->buffer_size;
- if (delta < 0) {
- hw_ptr_error(substream,
- "Unexpected hw_pointer value "
- "(stream=%i, pos=%ld, intr_ptr=%ld)\n",
- substream->stream, (long)pos,
- (long)hw_ptr_interrupt);
-#if 1
- /* simply skipping the hwptr update seems more
- * robust in some cases, e.g. on VMware with
- * inaccurate timer source
- */
- return 0; /* skip this update */
-#else
- /* rebase to interrupt position */
- hw_base = new_hw_ptr = hw_ptr_interrupt;
- /* align hw_base to buffer_size */
- hw_base -= hw_base % runtime->buffer_size;
- delta = 0;
-#endif
- } else {
+ if (in_interrupt) {
+ /* we know that one period was processed */
+ /* delta = "expected next hw_ptr" for in_interrupt != 0 */
+ delta = runtime->hw_ptr_interrupt + runtime->period_size;
+ if (delta > new_hw_ptr) {
hw_base += runtime->buffer_size;
if (hw_base >= runtime->boundary)
hw_base = 0;
new_hw_ptr = hw_base + pos;
+ goto __delta;
}
}
+ /* new_hw_ptr might be lower than old_hw_ptr in case when */
+ /* pointer crosses the end of the ring buffer */
+ if (new_hw_ptr < old_hw_ptr) {
+ hw_base += runtime->buffer_size;
+ if (hw_base >= runtime->boundary)
+ hw_base = 0;
+ new_hw_ptr = hw_base + pos;
+ }
+ __delta:
+ delta = (new_hw_ptr - old_hw_ptr) % runtime->boundary;
+ if (xrun_debug(substream, in_interrupt ?
+ XRUN_DEBUG_PERIODUPDATE : XRUN_DEBUG_HWPTRUPDATE)) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ snd_printd("%s_update: %s: pos=%u/%u/%u, "
+ "hwptr=%ld/%ld/%ld/%ld\n",
+ in_interrupt ? "period" : "hwptr",
+ name,
+ (unsigned int)pos,
+ (unsigned int)runtime->period_size,
+ (unsigned int)runtime->buffer_size,
+ (unsigned long)delta,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)new_hw_ptr,
+ (unsigned long)runtime->hw_ptr_base);
+ }
+ /* something must be really wrong */
+ if (delta >= runtime->buffer_size + runtime->period_size) {
+ hw_ptr_error(substream,
+ "Unexpected hw_pointer value %s"
+ "(stream=%i, pos=%ld, new_hw_ptr=%ld, "
+ "old_hw_ptr=%ld)\n",
+ in_interrupt ? "[Q] " : "[P]",
+ substream->stream, (long)pos,
+ (long)new_hw_ptr, (long)old_hw_ptr);
+ return 0;
+ }
/* Do jiffies check only in xrun_debug mode */
- if (!xrun_debug(substream, 4))
+ if (!xrun_debug(substream, XRUN_DEBUG_JIFFIESCHECK))
goto no_jiffies_check;
/* Skip the jiffies check for hardwares with BATCH flag.
@@ -299,7 +382,7 @@
*/
if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
goto no_jiffies_check;
- hdelta = new_hw_ptr - old_hw_ptr;
+ hdelta = delta;
if (hdelta < runtime->delay)
goto no_jiffies_check;
hdelta -= runtime->delay;
@@ -308,130 +391,68 @@
delta = jdelta /
(((runtime->period_size * HZ) / runtime->rate)
+ HZ/100);
+ /* move new_hw_ptr according jiffies not pos variable */
+ new_hw_ptr = old_hw_ptr;
+ hw_base = delta;
+ /* use loop to avoid checks for delta overflows */
+ /* the delta value is small or zero in most cases */
+ while (delta > 0) {
+ new_hw_ptr += runtime->period_size;
+ if (new_hw_ptr >= runtime->boundary)
+ new_hw_ptr -= runtime->boundary;
+ delta--;
+ }
+ /* align hw_base to buffer_size */
hw_ptr_error(substream,
- "hw_ptr skipping! [Q] "
+ "hw_ptr skipping! %s"
"(pos=%ld, delta=%ld, period=%ld, "
- "jdelta=%lu/%lu/%lu)\n",
+ "jdelta=%lu/%lu/%lu, hw_ptr=%ld/%ld)\n",
+ in_interrupt ? "[Q] " : "",
(long)pos, (long)hdelta,
(long)runtime->period_size, jdelta,
- ((hdelta * HZ) / runtime->rate), delta);
- hw_ptr_interrupt = runtime->hw_ptr_interrupt +
- runtime->period_size * delta;
- if (hw_ptr_interrupt >= runtime->boundary)
- hw_ptr_interrupt -= runtime->boundary;
- /* rebase to interrupt position */
- hw_base = new_hw_ptr = hw_ptr_interrupt;
- /* align hw_base to buffer_size */
- hw_base -= hw_base % runtime->buffer_size;
+ ((hdelta * HZ) / runtime->rate), hw_base,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)new_hw_ptr);
+ /* reset values to proper state */
delta = 0;
+ hw_base = new_hw_ptr - (new_hw_ptr % runtime->buffer_size);
}
no_jiffies_check:
if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
- "Lost interrupts? "
- "(stream=%i, delta=%ld, intr_ptr=%ld)\n",
+ "Lost interrupts? %s"
+ "(stream=%i, delta=%ld, new_hw_ptr=%ld, "
+ "old_hw_ptr=%ld)\n",
+ in_interrupt ? "[Q] " : "",
substream->stream, (long)delta,
- (long)hw_ptr_interrupt);
- /* rebase hw_ptr_interrupt */
- hw_ptr_interrupt =
- new_hw_ptr - new_hw_ptr % runtime->period_size;
+ (long)new_hw_ptr,
+ (long)old_hw_ptr);
}
- runtime->hw_ptr_interrupt = hw_ptr_interrupt;
+
+ if (runtime->status->hw_ptr == new_hw_ptr)
+ return 0;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
snd_pcm_playback_silence(substream, new_hw_ptr);
- if (runtime->status->hw_ptr == new_hw_ptr)
- return 0;
-
+ if (in_interrupt) {
+ runtime->hw_ptr_interrupt = new_hw_ptr -
+ (new_hw_ptr % runtime->period_size);
+ }
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
runtime->hw_ptr_jiffies = jiffies;
if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
- return snd_pcm_update_hw_ptr_post(substream, runtime);
+ return snd_pcm_update_state(substream, runtime);
}
/* CAUTION: call it with irq disabled */
int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- snd_pcm_uframes_t pos;
- snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
- snd_pcm_sframes_t delta;
- unsigned long jdelta;
-
- old_hw_ptr = runtime->status->hw_ptr;
- pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
- if (pos == SNDRV_PCM_POS_XRUN) {
- xrun(substream);
- return -EPIPE;
- }
- if (xrun_debug(substream, 16)) {
- char name[16];
- pcm_debug_name(substream, name, sizeof(name));
- snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
- "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
- name, (unsigned int)pos,
- (unsigned int)runtime->period_size,
- (unsigned int)runtime->buffer_size,
- (unsigned long)old_hw_ptr,
- (unsigned long)runtime->hw_ptr_base,
- (unsigned long)runtime->hw_ptr_interrupt);
- }
-
- hw_base = runtime->hw_ptr_base;
- new_hw_ptr = hw_base + pos;
-
- delta = new_hw_ptr - old_hw_ptr;
- jdelta = jiffies - runtime->hw_ptr_jiffies;
- if (delta < 0) {
- delta += runtime->buffer_size;
- if (delta < 0) {
- hw_ptr_error(substream,
- "Unexpected hw_pointer value [2] "
- "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
- substream->stream, (long)pos,
- (long)old_hw_ptr, jdelta);
- return 0;
- }
- hw_base += runtime->buffer_size;
- if (hw_base >= runtime->boundary)
- hw_base = 0;
- new_hw_ptr = hw_base + pos;
- }
- /* Do jiffies check only in xrun_debug mode */
- if (!xrun_debug(substream, 4))
- goto no_jiffies_check;
- if (delta < runtime->delay)
- goto no_jiffies_check;
- delta -= runtime->delay;
- if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
- hw_ptr_error(substream,
- "hw_ptr skipping! "
- "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
- (long)pos, (long)delta,
- (long)runtime->period_size, jdelta,
- ((delta * HZ) / runtime->rate));
- return 0;
- }
- no_jiffies_check:
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
- runtime->silence_size > 0)
- snd_pcm_playback_silence(substream, new_hw_ptr);
-
- if (runtime->status->hw_ptr == new_hw_ptr)
- return 0;
-
- runtime->hw_ptr_base = hw_base;
- runtime->status->hw_ptr = new_hw_ptr;
- runtime->hw_ptr_jiffies = jiffies;
- if (runtime->tstamp_mode == SNDRV_PCM_TSTAMP_ENABLE)
- snd_pcm_gettime(runtime, (struct timespec *)&runtime->status->tstamp);
-
- return snd_pcm_update_hw_ptr_post(substream, runtime);
+ return snd_pcm_update_hw_ptr0(substream, 0);
}
/**
@@ -745,10 +766,13 @@
unsigned int rats_count, struct snd_ratnum *rats,
unsigned int *nump, unsigned int *denp)
{
- unsigned int best_num, best_diff, best_den;
+ unsigned int best_num, best_den;
+ int best_diff;
unsigned int k;
struct snd_interval t;
int err;
+ unsigned int result_num, result_den;
+ int result_diff;
best_num = best_den = best_diff = 0;
for (k = 0; k < rats_count; ++k) {
@@ -770,6 +794,8 @@
den -= r;
}
diff = num - q * den;
+ if (diff < 0)
+ diff = -diff;
if (best_num == 0 ||
diff * best_den < best_diff * den) {
best_diff = diff;
@@ -784,6 +810,9 @@
t.min = div_down(best_num, best_den);
t.openmin = !!(best_num % best_den);
+ result_num = best_num;
+ result_diff = best_diff;
+ result_den = best_den;
best_num = best_den = best_diff = 0;
for (k = 0; k < rats_count; ++k) {
unsigned int num = rats[k].num;
@@ -806,6 +835,8 @@
den += rats[k].den_step - r;
}
diff = q * den - num;
+ if (diff < 0)
+ diff = -diff;
if (best_num == 0 ||
diff * best_den < best_diff * den) {
best_diff = diff;
@@ -825,10 +856,14 @@
return err;
if (snd_interval_single(i)) {
+ if (best_diff * result_den < result_diff * best_den) {
+ result_num = best_num;
+ result_den = best_den;
+ }
if (nump)
- *nump = best_num;
+ *nump = result_num;
if (denp)
- *denp = best_den;
+ *denp = result_den;
}
return err;
}
@@ -1643,7 +1678,7 @@
snd_pcm_stream_lock_irqsave(substream, flags);
if (!snd_pcm_running(substream) ||
- snd_pcm_update_hw_ptr_interrupt(substream) < 0)
+ snd_pcm_update_hw_ptr0(substream, 1) < 0)
goto _end;
if (substream->timer_running)
@@ -1674,7 +1709,7 @@
long tout;
init_waitqueue_entry(&wait, current);
- add_wait_queue(&runtime->sleep, &wait);
+ add_wait_queue(&runtime->tsleep, &wait);
for (;;) {
if (signal_pending(current)) {
err = -ERESTARTSYS;
@@ -1717,7 +1752,7 @@
break;
}
_endloop:
- remove_wait_queue(&runtime->sleep, &wait);
+ remove_wait_queue(&runtime->tsleep, &wait);
*availp = avail;
return err;
}
@@ -1776,6 +1811,7 @@
goto _end_unlock;
}
+ runtime->twake = 1;
while (size > 0) {
snd_pcm_uframes_t frames, appl_ptr, appl_ofs;
snd_pcm_uframes_t avail;
@@ -1797,15 +1833,17 @@
if (frames > cont)
frames = cont;
if (snd_BUG_ON(!frames)) {
+ runtime->twake = 0;
snd_pcm_stream_unlock_irq(substream);
return -EINVAL;
}
appl_ptr = runtime->control->appl_ptr;
appl_ofs = appl_ptr % runtime->buffer_size;
snd_pcm_stream_unlock_irq(substream);
- if ((err = transfer(substream, appl_ofs, data, offset, frames)) < 0)
- goto _end;
+ err = transfer(substream, appl_ofs, data, offset, frames);
snd_pcm_stream_lock_irq(substream);
+ if (err < 0)
+ goto _end_unlock;
switch (runtime->status->state) {
case SNDRV_PCM_STATE_XRUN:
err = -EPIPE;
@@ -1834,8 +1872,10 @@
}
}
_end_unlock:
+ runtime->twake = 0;
+ if (xfer > 0 && err >= 0)
+ snd_pcm_update_state(substream, runtime);
snd_pcm_stream_unlock_irq(substream);
- _end:
return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
}
@@ -1993,6 +2033,7 @@
goto _end_unlock;
}
+ runtime->twake = 1;
while (size > 0) {
snd_pcm_uframes_t frames, appl_ptr, appl_ofs;
snd_pcm_uframes_t avail;
@@ -2021,15 +2062,17 @@
if (frames > cont)
frames = cont;
if (snd_BUG_ON(!frames)) {
+ runtime->twake = 0;
snd_pcm_stream_unlock_irq(substream);
return -EINVAL;
}
appl_ptr = runtime->control->appl_ptr;
appl_ofs = appl_ptr % runtime->buffer_size;
snd_pcm_stream_unlock_irq(substream);
- if ((err = transfer(substream, appl_ofs, data, offset, frames)) < 0)
- goto _end;
+ err = transfer(substream, appl_ofs, data, offset, frames);
snd_pcm_stream_lock_irq(substream);
+ if (err < 0)
+ goto _end_unlock;
switch (runtime->status->state) {
case SNDRV_PCM_STATE_XRUN:
err = -EPIPE;
@@ -2052,8 +2095,10 @@
xfer += frames;
}
_end_unlock:
+ runtime->twake = 0;
+ if (xfer > 0 && err >= 0)
+ snd_pcm_update_state(substream, runtime);
snd_pcm_stream_unlock_irq(substream);
- _end:
return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
}
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index caa7796..d6d49d6 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -23,6 +23,7 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/vmalloc.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/info.h>
@@ -434,3 +435,57 @@
}
EXPORT_SYMBOL(snd_pcm_lib_free_pages);
+
+int _snd_pcm_lib_alloc_vmalloc_buffer(struct snd_pcm_substream *substream,
+ size_t size, gfp_t gfp_flags)
+{
+ struct snd_pcm_runtime *runtime;
+
+ if (PCM_RUNTIME_CHECK(substream))
+ return -EINVAL;
+ runtime = substream->runtime;
+ if (runtime->dma_area) {
+ if (runtime->dma_bytes >= size)
+ return 0; /* already large enough */
+ vfree(runtime->dma_area);
+ }
+ runtime->dma_area = __vmalloc(size, gfp_flags, PAGE_KERNEL);
+ if (!runtime->dma_area)
+ return -ENOMEM;
+ runtime->dma_bytes = size;
+ return 1;
+}
+EXPORT_SYMBOL(_snd_pcm_lib_alloc_vmalloc_buffer);
+
+/**
+ * snd_pcm_lib_free_vmalloc_buffer - free vmalloc buffer
+ * @substream: the substream with a buffer allocated by
+ * snd_pcm_lib_alloc_vmalloc_buffer()
+ */
+int snd_pcm_lib_free_vmalloc_buffer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime;
+
+ if (PCM_RUNTIME_CHECK(substream))
+ return -EINVAL;
+ runtime = substream->runtime;
+ vfree(runtime->dma_area);
+ runtime->dma_area = NULL;
+ return 0;
+}
+EXPORT_SYMBOL(snd_pcm_lib_free_vmalloc_buffer);
+
+/**
+ * snd_pcm_lib_get_vmalloc_page - map vmalloc buffer offset to page struct
+ * @substream: the substream with a buffer allocated by
+ * snd_pcm_lib_alloc_vmalloc_buffer()
+ * @offset: offset in the buffer
+ *
+ * This function is to be used as the page callback in the PCM ops.
+ */
+struct page *snd_pcm_lib_get_vmalloc_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return vmalloc_to_page(substream->runtime->dma_area + offset);
+}
+EXPORT_SYMBOL(snd_pcm_lib_get_vmalloc_page);
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 25b0641..8728876 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -27,6 +27,7 @@
#include <linux/pm_qos_params.h>
#include <linux/uio.h>
#include <linux/dma-mapping.h>
+#include <linux/math64.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/info.h>
@@ -315,10 +316,10 @@
if (!params->info)
params->info = hw->info & ~SNDRV_PCM_INFO_FIFO_IN_FRAMES;
if (!params->fifo_size) {
- if (snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) ==
- snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT]) &&
- snd_mask_min(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS]) ==
- snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
+ m = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
+ if (snd_mask_min(m) == snd_mask_max(m) &&
+ snd_interval_min(i) == snd_interval_max(i)) {
changed = substream->ops->ioctl(substream,
SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
if (changed < 0)
@@ -366,6 +367,38 @@
return usecs;
}
+static int calc_boundary(struct snd_pcm_runtime *runtime)
+{
+ u_int64_t boundary;
+
+ boundary = (u_int64_t)runtime->buffer_size *
+ (u_int64_t)runtime->period_size;
+#if BITS_PER_LONG < 64
+ /* try to find lowest common multiple for buffer and period */
+ if (boundary > LONG_MAX - runtime->buffer_size) {
+ u_int32_t remainder = -1;
+ u_int32_t divident = runtime->buffer_size;
+ u_int32_t divisor = runtime->period_size;
+ while (remainder) {
+ remainder = divident % divisor;
+ if (remainder) {
+ divident = divisor;
+ divisor = remainder;
+ }
+ }
+ boundary = div_u64(boundary, divisor);
+ if (boundary > LONG_MAX - runtime->buffer_size)
+ return -ERANGE;
+ }
+#endif
+ if (boundary == 0)
+ return -ERANGE;
+ runtime->boundary = boundary;
+ while (runtime->boundary * 2 <= LONG_MAX - runtime->buffer_size)
+ runtime->boundary *= 2;
+ return 0;
+}
+
static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -441,9 +474,9 @@
runtime->stop_threshold = runtime->buffer_size;
runtime->silence_threshold = 0;
runtime->silence_size = 0;
- runtime->boundary = runtime->buffer_size;
- while (runtime->boundary * 2 <= LONG_MAX - runtime->buffer_size)
- runtime->boundary *= 2;
+ err = calc_boundary(runtime);
+ if (err < 0)
+ goto _error;
snd_pcm_timer_resolution_change(substream);
runtime->status->state = SNDRV_PCM_STATE_SETUP;
@@ -516,6 +549,7 @@
struct snd_pcm_sw_params *params)
{
struct snd_pcm_runtime *runtime;
+ int err;
if (PCM_RUNTIME_CHECK(substream))
return -ENXIO;
@@ -540,6 +574,7 @@
if (params->silence_threshold > runtime->buffer_size)
return -EINVAL;
}
+ err = 0;
snd_pcm_stream_lock_irq(substream);
runtime->tstamp_mode = params->tstamp_mode;
runtime->period_step = params->period_step;
@@ -553,10 +588,10 @@
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
snd_pcm_playback_silence(substream, ULONG_MAX);
- wake_up(&runtime->sleep);
+ err = snd_pcm_update_state(substream, runtime);
}
snd_pcm_stream_unlock_irq(substream);
- return 0;
+ return err;
}
static int snd_pcm_sw_params_user(struct snd_pcm_substream *substream,
@@ -917,6 +952,7 @@
runtime->status->state = state;
}
wake_up(&runtime->sleep);
+ wake_up(&runtime->tsleep);
}
static struct action_ops snd_pcm_action_stop = {
@@ -1002,6 +1038,7 @@
SNDRV_TIMER_EVENT_MPAUSE,
&runtime->trigger_tstamp);
wake_up(&runtime->sleep);
+ wake_up(&runtime->tsleep);
} else {
runtime->status->state = SNDRV_PCM_STATE_RUNNING;
if (substream->timer)
@@ -1059,6 +1096,7 @@
runtime->status->suspended_state = runtime->status->state;
runtime->status->state = SNDRV_PCM_STATE_SUSPENDED;
wake_up(&runtime->sleep);
+ wake_up(&runtime->tsleep);
}
static struct action_ops snd_pcm_action_suspend = {
@@ -3162,9 +3200,7 @@
long size;
unsigned long offset;
-#ifdef pgprot_noncached
area->vm_page_prot = pgprot_noncached(area->vm_page_prot);
-#endif
area->vm_flags |= VM_IO;
size = area->vm_end - area->vm_start;
offset = area->vm_pgoff << PAGE_SHIFT;
@@ -3178,6 +3214,15 @@
EXPORT_SYMBOL(snd_pcm_lib_mmap_iomem);
#endif /* SNDRV_PCM_INFO_MMAP */
+/* mmap callback with pgprot_noncached */
+int snd_pcm_lib_mmap_noncached(struct snd_pcm_substream *substream,
+ struct vm_area_struct *area)
+{
+ area->vm_page_prot = pgprot_noncached(area->vm_page_prot);
+ return snd_pcm_default_mmap(substream, area);
+}
+EXPORT_SYMBOL(snd_pcm_lib_mmap_noncached);
+
/*
* mmap DMA buffer
*/
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 8ca2be3..48eca9f 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2190,7 +2190,7 @@
if (p->cmd == cmd)
return p->func(client, arg);
}
- snd_printd("seq unknown ioctl() 0x%x (type='%c', number=0x%2x)\n",
+ snd_printd("seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
cmd, _IOC_TYPE(cmd), _IOC_NR(cmd));
return -ENOTTY;
}
diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c
index f745c31..160b1bd 100644
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -33,22 +33,21 @@
#define SKEW_BASE 0x10000 /* 16bit shift */
-static void snd_seq_timer_set_tick_resolution(struct snd_seq_timer_tick *tick,
- int tempo, int ppq)
+static void snd_seq_timer_set_tick_resolution(struct snd_seq_timer *tmr)
{
- if (tempo < 1000000)
- tick->resolution = (tempo * 1000) / ppq;
+ if (tmr->tempo < 1000000)
+ tmr->tick.resolution = (tmr->tempo * 1000) / tmr->ppq;
else {
/* might overflow.. */
unsigned int s;
- s = tempo % ppq;
- s = (s * 1000) / ppq;
- tick->resolution = (tempo / ppq) * 1000;
- tick->resolution += s;
+ s = tmr->tempo % tmr->ppq;
+ s = (s * 1000) / tmr->ppq;
+ tmr->tick.resolution = (tmr->tempo / tmr->ppq) * 1000;
+ tmr->tick.resolution += s;
}
- if (tick->resolution <= 0)
- tick->resolution = 1;
- snd_seq_timer_update_tick(tick, 0);
+ if (tmr->tick.resolution <= 0)
+ tmr->tick.resolution = 1;
+ snd_seq_timer_update_tick(&tmr->tick, 0);
}
/* create new timer (constructor) */
@@ -96,7 +95,7 @@
/* setup defaults */
tmr->ppq = 96; /* 96 PPQ */
tmr->tempo = 500000; /* 120 BPM */
- snd_seq_timer_set_tick_resolution(&tmr->tick, tmr->tempo, tmr->ppq);
+ snd_seq_timer_set_tick_resolution(tmr);
tmr->running = 0;
tmr->type = SNDRV_SEQ_TIMER_ALSA;
@@ -180,7 +179,7 @@
spin_lock_irqsave(&tmr->lock, flags);
if ((unsigned int)tempo != tmr->tempo) {
tmr->tempo = tempo;
- snd_seq_timer_set_tick_resolution(&tmr->tick, tmr->tempo, tmr->ppq);
+ snd_seq_timer_set_tick_resolution(tmr);
}
spin_unlock_irqrestore(&tmr->lock, flags);
return 0;
@@ -205,7 +204,7 @@
}
tmr->ppq = ppq;
- snd_seq_timer_set_tick_resolution(&tmr->tick, tmr->tempo, tmr->ppq);
+ snd_seq_timer_set_tick_resolution(tmr);
spin_unlock_irqrestore(&tmr->lock, flags);
return 0;
}
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index 252e04c..7f41990 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -45,109 +45,23 @@
#define MAX_PCM_SUBSTREAMS 128
#define MAX_MIDI_DEVICES 2
-#if 0 /* emu10k1 emulation */
-#define MAX_BUFFER_SIZE (128 * 1024)
-static int emu10k1_playback_constraints(struct snd_pcm_runtime *runtime)
-{
- int err;
- err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- if (err < 0)
- return err;
- err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 256, UINT_MAX);
- if (err < 0)
- return err;
- return 0;
-}
-#define add_playback_constraints emu10k1_playback_constraints
-#endif
-
-#if 0 /* RME9652 emulation */
-#define MAX_BUFFER_SIZE (26 * 64 * 1024)
-#define USE_FORMATS SNDRV_PCM_FMTBIT_S32_LE
-#define USE_CHANNELS_MIN 26
-#define USE_CHANNELS_MAX 26
-#define USE_PERIODS_MIN 2
-#define USE_PERIODS_MAX 2
-#endif
-
-#if 0 /* ICE1712 emulation */
-#define MAX_BUFFER_SIZE (256 * 1024)
-#define USE_FORMATS SNDRV_PCM_FMTBIT_S32_LE
-#define USE_CHANNELS_MIN 10
-#define USE_CHANNELS_MAX 10
-#define USE_PERIODS_MIN 1
-#define USE_PERIODS_MAX 1024
-#endif
-
-#if 0 /* UDA1341 emulation */
-#define MAX_BUFFER_SIZE (16380)
-#define USE_FORMATS SNDRV_PCM_FMTBIT_S16_LE
-#define USE_CHANNELS_MIN 2
-#define USE_CHANNELS_MAX 2
-#define USE_PERIODS_MIN 2
-#define USE_PERIODS_MAX 255
-#endif
-
-#if 0 /* simple AC97 bridge (intel8x0) with 48kHz AC97 only codec */
-#define USE_FORMATS SNDRV_PCM_FMTBIT_S16_LE
-#define USE_CHANNELS_MIN 2
-#define USE_CHANNELS_MAX 2
-#define USE_RATE SNDRV_PCM_RATE_48000
-#define USE_RATE_MIN 48000
-#define USE_RATE_MAX 48000
-#endif
-
-#if 0 /* CA0106 */
-#define USE_FORMATS SNDRV_PCM_FMTBIT_S16_LE
-#define USE_CHANNELS_MIN 2
-#define USE_CHANNELS_MAX 2
-#define USE_RATE (SNDRV_PCM_RATE_48000|SNDRV_PCM_RATE_96000|SNDRV_PCM_RATE_192000)
-#define USE_RATE_MIN 48000
-#define USE_RATE_MAX 192000
-#define MAX_BUFFER_SIZE ((65536-64)*8)
-#define MAX_PERIOD_SIZE (65536-64)
-#define USE_PERIODS_MIN 2
-#define USE_PERIODS_MAX 8
-#endif
-
-
/* defaults */
-#ifndef MAX_BUFFER_SIZE
#define MAX_BUFFER_SIZE (64*1024)
-#endif
-#ifndef MAX_PERIOD_SIZE
+#define MIN_PERIOD_SIZE 64
#define MAX_PERIOD_SIZE MAX_BUFFER_SIZE
-#endif
-#ifndef USE_FORMATS
#define USE_FORMATS (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE)
-#endif
-#ifndef USE_RATE
#define USE_RATE SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000
#define USE_RATE_MIN 5500
#define USE_RATE_MAX 48000
-#endif
-#ifndef USE_CHANNELS_MIN
#define USE_CHANNELS_MIN 1
-#endif
-#ifndef USE_CHANNELS_MAX
#define USE_CHANNELS_MAX 2
-#endif
-#ifndef USE_PERIODS_MIN
#define USE_PERIODS_MIN 1
-#endif
-#ifndef USE_PERIODS_MAX
#define USE_PERIODS_MAX 1024
-#endif
-#ifndef add_playback_constraints
-#define add_playback_constraints(x) 0
-#endif
-#ifndef add_capture_constraints
-#define add_capture_constraints(x) 0
-#endif
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static char *model[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = NULL};
static int pcm_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8};
//static int midi_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
@@ -162,6 +76,8 @@
MODULE_PARM_DESC(id, "ID string for dummy soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable this dummy soundcard.");
+module_param_array(model, charp, NULL, 0444);
+MODULE_PARM_DESC(model, "Soundcard model.");
module_param_array(pcm_devs, int, NULL, 0444);
MODULE_PARM_DESC(pcm_devs, "PCM devices # (0-4) for dummy driver.");
module_param_array(pcm_substreams, int, NULL, 0444);
@@ -193,9 +109,28 @@
snd_pcm_uframes_t (*pointer)(struct snd_pcm_substream *);
};
+struct dummy_model {
+ const char *name;
+ int (*playback_constraints)(struct snd_pcm_runtime *runtime);
+ int (*capture_constraints)(struct snd_pcm_runtime *runtime);
+ u64 formats;
+ size_t buffer_bytes_max;
+ size_t period_bytes_min;
+ size_t period_bytes_max;
+ unsigned int periods_min;
+ unsigned int periods_max;
+ unsigned int rates;
+ unsigned int rate_min;
+ unsigned int rate_max;
+ unsigned int channels_min;
+ unsigned int channels_max;
+};
+
struct snd_dummy {
struct snd_card *card;
+ struct dummy_model *model;
struct snd_pcm *pcm;
+ struct snd_pcm_hardware pcm_hw;
spinlock_t mixer_lock;
int mixer_volume[MIXER_ADDR_LAST+1][2];
int capture_source[MIXER_ADDR_LAST+1][2];
@@ -203,6 +138,92 @@
};
/*
+ * card models
+ */
+
+static int emu10k1_playback_constraints(struct snd_pcm_runtime *runtime)
+{
+ int err;
+ err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 256, UINT_MAX);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+struct dummy_model model_emu10k1 = {
+ .name = "emu10k1",
+ .playback_constraints = emu10k1_playback_constraints,
+ .buffer_bytes_max = 128 * 1024,
+};
+
+struct dummy_model model_rme9652 = {
+ .name = "rme9652",
+ .buffer_bytes_max = 26 * 64 * 1024,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels_min = 26,
+ .channels_max = 26,
+ .periods_min = 2,
+ .periods_max = 2,
+};
+
+struct dummy_model model_ice1712 = {
+ .name = "ice1712",
+ .buffer_bytes_max = 256 * 1024,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels_min = 10,
+ .channels_max = 10,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+struct dummy_model model_uda1341 = {
+ .name = "uda1341",
+ .buffer_bytes_max = 16380,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 2,
+ .channels_max = 2,
+ .periods_min = 2,
+ .periods_max = 255,
+};
+
+struct dummy_model model_ac97 = {
+ .name = "ac97",
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+};
+
+struct dummy_model model_ca0106 = {
+ .name = "ca0106",
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .buffer_bytes_max = ((65536-64)*8),
+ .period_bytes_max = (65536-64),
+ .periods_min = 2,
+ .periods_max = 8,
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000|SNDRV_PCM_RATE_96000|SNDRV_PCM_RATE_192000,
+ .rate_min = 48000,
+ .rate_max = 192000,
+};
+
+struct dummy_model *dummy_models[] = {
+ &model_emu10k1,
+ &model_rme9652,
+ &model_ice1712,
+ &model_uda1341,
+ &model_ac97,
+ &model_ca0106,
+ NULL
+};
+
+/*
* system timer interface
*/
@@ -509,7 +530,7 @@
.channels_min = USE_CHANNELS_MIN,
.channels_max = USE_CHANNELS_MAX,
.buffer_bytes_max = MAX_BUFFER_SIZE,
- .period_bytes_min = 64,
+ .period_bytes_min = MIN_PERIOD_SIZE,
.period_bytes_max = MAX_PERIOD_SIZE,
.periods_min = USE_PERIODS_MIN,
.periods_max = USE_PERIODS_MAX,
@@ -538,6 +559,7 @@
static int dummy_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+ struct dummy_model *model = dummy->model;
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
@@ -551,7 +573,7 @@
if (err < 0)
return err;
- runtime->hw = dummy_pcm_hardware;
+ runtime->hw = dummy->pcm_hw;
if (substream->pcm->device & 1) {
runtime->hw.info &= ~SNDRV_PCM_INFO_INTERLEAVED;
runtime->hw.info |= SNDRV_PCM_INFO_NONINTERLEAVED;
@@ -560,10 +582,16 @@
runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- err = add_playback_constraints(substream->runtime);
- else
- err = add_capture_constraints(substream->runtime);
+ if (model == NULL)
+ return 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (model->playback_constraints)
+ err = model->playback_constraints(substream->runtime);
+ } else {
+ if (model->capture_constraints)
+ err = model->capture_constraints(substream->runtime);
+ }
if (err < 0) {
dummy->timer_ops->free(substream);
return err;
@@ -823,17 +851,19 @@
/*
* proc interface
*/
-static void print_formats(struct snd_info_buffer *buffer)
+static void print_formats(struct snd_dummy *dummy,
+ struct snd_info_buffer *buffer)
{
int i;
for (i = 0; i < SNDRV_PCM_FORMAT_LAST; i++) {
- if (dummy_pcm_hardware.formats & (1ULL << i))
+ if (dummy->pcm_hw.formats & (1ULL << i))
snd_iprintf(buffer, " %s", snd_pcm_format_name(i));
}
}
-static void print_rates(struct snd_info_buffer *buffer)
+static void print_rates(struct snd_dummy *dummy,
+ struct snd_info_buffer *buffer)
{
static int rates[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000,
@@ -841,19 +871,19 @@
};
int i;
- if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_CONTINUOUS)
+ if (dummy->pcm_hw.rates & SNDRV_PCM_RATE_CONTINUOUS)
snd_iprintf(buffer, " continuous");
- if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_KNOT)
+ if (dummy->pcm_hw.rates & SNDRV_PCM_RATE_KNOT)
snd_iprintf(buffer, " knot");
for (i = 0; i < ARRAY_SIZE(rates); i++)
- if (dummy_pcm_hardware.rates & (1 << i))
+ if (dummy->pcm_hw.rates & (1 << i))
snd_iprintf(buffer, " %d", rates[i]);
}
-#define get_dummy_int_ptr(ofs) \
- (unsigned int *)((char *)&dummy_pcm_hardware + (ofs))
-#define get_dummy_ll_ptr(ofs) \
- (unsigned long long *)((char *)&dummy_pcm_hardware + (ofs))
+#define get_dummy_int_ptr(dummy, ofs) \
+ (unsigned int *)((char *)&((dummy)->pcm_hw) + (ofs))
+#define get_dummy_ll_ptr(dummy, ofs) \
+ (unsigned long long *)((char *)&((dummy)->pcm_hw) + (ofs))
struct dummy_hw_field {
const char *name;
@@ -884,20 +914,21 @@
static void dummy_proc_read(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
+ struct snd_dummy *dummy = entry->private_data;
int i;
for (i = 0; i < ARRAY_SIZE(fields); i++) {
snd_iprintf(buffer, "%s ", fields[i].name);
if (fields[i].size == sizeof(int))
snd_iprintf(buffer, fields[i].format,
- *get_dummy_int_ptr(fields[i].offset));
+ *get_dummy_int_ptr(dummy, fields[i].offset));
else
snd_iprintf(buffer, fields[i].format,
- *get_dummy_ll_ptr(fields[i].offset));
+ *get_dummy_ll_ptr(dummy, fields[i].offset));
if (!strcmp(fields[i].name, "formats"))
- print_formats(buffer);
+ print_formats(dummy, buffer);
else if (!strcmp(fields[i].name, "rates"))
- print_rates(buffer);
+ print_rates(dummy, buffer);
snd_iprintf(buffer, "\n");
}
}
@@ -905,6 +936,7 @@
static void dummy_proc_write(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
+ struct snd_dummy *dummy = entry->private_data;
char line[64];
while (!snd_info_get_line(buffer, line, sizeof(line))) {
@@ -924,9 +956,9 @@
if (strict_strtoull(item, 0, &val))
continue;
if (fields[i].size == sizeof(int))
- *get_dummy_int_ptr(fields[i].offset) = val;
+ *get_dummy_int_ptr(dummy, fields[i].offset) = val;
else
- *get_dummy_ll_ptr(fields[i].offset) = val;
+ *get_dummy_ll_ptr(dummy, fields[i].offset) = val;
}
}
@@ -938,6 +970,7 @@
snd_info_set_text_ops(entry, chip, dummy_proc_read);
entry->c.text.write = dummy_proc_write;
entry->mode |= S_IWUSR;
+ entry->private_data = chip;
}
}
#else
@@ -948,6 +981,7 @@
{
struct snd_card *card;
struct snd_dummy *dummy;
+ struct dummy_model *m = NULL, **mdl;
int idx, err;
int dev = devptr->id;
@@ -957,6 +991,15 @@
return err;
dummy = card->private_data;
dummy->card = card;
+ for (mdl = dummy_models; *mdl && model[dev]; mdl++) {
+ if (strcmp(model[dev], (*mdl)->name) == 0) {
+ printk(KERN_INFO
+ "snd-dummy: Using model '%s' for card %i\n",
+ (*mdl)->name, card->number);
+ m = dummy->model = *mdl;
+ break;
+ }
+ }
for (idx = 0; idx < MAX_PCM_DEVICES && idx < pcm_devs[dev]; idx++) {
if (pcm_substreams[dev] < 1)
pcm_substreams[dev] = 1;
@@ -966,6 +1009,33 @@
if (err < 0)
goto __nodev;
}
+
+ dummy->pcm_hw = dummy_pcm_hardware;
+ if (m) {
+ if (m->formats)
+ dummy->pcm_hw.formats = m->formats;
+ if (m->buffer_bytes_max)
+ dummy->pcm_hw.buffer_bytes_max = m->buffer_bytes_max;
+ if (m->period_bytes_min)
+ dummy->pcm_hw.period_bytes_min = m->period_bytes_min;
+ if (m->period_bytes_max)
+ dummy->pcm_hw.period_bytes_max = m->period_bytes_max;
+ if (m->periods_min)
+ dummy->pcm_hw.periods_min = m->periods_min;
+ if (m->periods_max)
+ dummy->pcm_hw.periods_max = m->periods_max;
+ if (m->rates)
+ dummy->pcm_hw.rates = m->rates;
+ if (m->rate_min)
+ dummy->pcm_hw.rate_min = m->rate_min;
+ if (m->rate_max)
+ dummy->pcm_hw.rate_max = m->rate_max;
+ if (m->channels_min)
+ dummy->pcm_hw.channels_min = m->channels_min;
+ if (m->channels_max)
+ dummy->pcm_hw.channels_max = m->channels_max;
+ }
+
err = snd_card_dummy_new_mixer(dummy);
if (err < 0)
goto __nodev;
diff --git a/sound/drivers/vx/vx_pcm.c b/sound/drivers/vx/vx_pcm.c
index 6644d00..35a2f71 100644
--- a/sound/drivers/vx/vx_pcm.c
+++ b/sound/drivers/vx/vx_pcm.c
@@ -46,7 +46,6 @@
*/
#include <linux/slab.h>
-#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/asoundef.h>
@@ -56,55 +55,6 @@
/*
- * we use a vmalloc'ed (sg-)buffer
- */
-
-/* get the physical page pointer on the given offset */
-static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
- unsigned long offset)
-{
- void *pageptr = subs->runtime->dma_area + offset;
- return vmalloc_to_page(pageptr);
-}
-
-/*
- * allocate a buffer via vmalloc_32().
- * called from hw_params
- * NOTE: this may be called not only once per pcm open!
- */
-static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t size)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
- if (runtime->dma_area) {
- /* already allocated */
- if (runtime->dma_bytes >= size)
- return 0; /* already enough large */
- vfree(runtime->dma_area);
- }
- runtime->dma_area = vmalloc_32(size);
- if (! runtime->dma_area)
- return -ENOMEM;
- memset(runtime->dma_area, 0, size);
- runtime->dma_bytes = size;
- return 1; /* changed */
-}
-
-/*
- * free the buffer.
- * called from hw_free callback
- * NOTE: this may be called not only once per pcm open!
- */
-static int snd_pcm_free_vmalloc_buffer(struct snd_pcm_substream *subs)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
-
- vfree(runtime->dma_area);
- runtime->dma_area = NULL;
- return 0;
-}
-
-
-/*
* read three pending pcm bytes via inb()
*/
static void vx_pcm_read_per_bytes(struct vx_core *chip, struct snd_pcm_runtime *runtime,
@@ -865,7 +815,8 @@
static int vx_pcm_hw_params(struct snd_pcm_substream *subs,
struct snd_pcm_hw_params *hw_params)
{
- return snd_pcm_alloc_vmalloc_buffer(subs, params_buffer_bytes(hw_params));
+ return snd_pcm_lib_alloc_vmalloc_32_buffer
+ (subs, params_buffer_bytes(hw_params));
}
/*
@@ -873,7 +824,7 @@
*/
static int vx_pcm_hw_free(struct snd_pcm_substream *subs)
{
- return snd_pcm_free_vmalloc_buffer(subs);
+ return snd_pcm_lib_free_vmalloc_buffer(subs);
}
/*
@@ -953,7 +904,8 @@
.prepare = vx_pcm_prepare,
.trigger = vx_pcm_trigger,
.pointer = vx_pcm_playback_pointer,
- .page = snd_pcm_get_vmalloc_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
@@ -1173,7 +1125,8 @@
.prepare = vx_pcm_prepare,
.trigger = vx_pcm_trigger,
.pointer = vx_pcm_capture_pointer,
- .page = snd_pcm_get_vmalloc_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 02fe81c..755a0a5 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -63,15 +63,16 @@
will be called snd-ad1848.
config SND_ALS100
- tristate "Avance Logic ALS100/ALS120"
+ tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx"
depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_SB16_DSP
help
- Say Y here to include support for soundcards based on Avance
- Logic ALS100, ALS110, ALS120 and ALS200 chips.
+ Say Y here to include support for soundcards based on the
+ Diamond Technologies DT-019X or Avance Logic chips: ALS007,
+ ALS100, ALS110, ALS120 and ALS200 chips.
To compile this driver as a module, choose M here: the module
will be called snd-als100.
@@ -127,20 +128,6 @@
To compile this driver as a module, choose M here: the module
will be called snd-cs4236.
-config SND_DT019X
- tristate "Diamond Technologies DT-019X, Avance Logic ALS-007"
- depends on PNP
- select ISAPNP
- select SND_OPL3_LIB
- select SND_MPU401_UART
- select SND_SB16_DSP
- help
- Say Y here to include support for soundcards based on the
- Diamond Technologies DT-019X or Avance Logic ALS-007 chips.
-
- To compile this driver as a module, choose M here: the module
- will be called snd-dt019x.
-
config SND_ES968
tristate "Generic ESS ES968 driver"
depends on PNP
@@ -252,6 +239,22 @@
To compile this driver as a module, choose M here: the module
will be called snd-interwave-stb.
+config SND_JAZZ16
+ tristate "Media Vision Jazz16 card and compatibles"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_SB8_DSP
+ help
+ Say Y here to include support for soundcards based on the
+ Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16),
+ codec MVA416 (CS4216) and mixer MVA514 (ICS2514).
+ Media Vision's Jazz16 cards were sold under names Pro Sonic 16,
+ Premium 3-D and Pro 3-D. There were also OEMs cards with the
+ Jazz16 chipset.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-jazz16.
+
config SND_OPL3SA2
tristate "Yamaha OPL3-SA2/SA3"
select SND_OPL3_LIB
diff --git a/sound/isa/Makefile b/sound/isa/Makefile
index b906b9a..c73d30c 100644
--- a/sound/isa/Makefile
+++ b/sound/isa/Makefile
@@ -7,7 +7,6 @@
snd-als100-objs := als100.o
snd-azt2320-objs := azt2320.o
snd-cmi8330-objs := cmi8330.o
-snd-dt019x-objs := dt019x.o
snd-es18xx-objs := es18xx.o
snd-opl3sa2-objs := opl3sa2.o
snd-sc6000-objs := sc6000.o
@@ -19,7 +18,6 @@
obj-$(CONFIG_SND_ALS100) += snd-als100.o
obj-$(CONFIG_SND_AZT2320) += snd-azt2320.o
obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o
-obj-$(CONFIG_SND_DT019X) += snd-dt019x.o
obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o
obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o
obj-$(CONFIG_SND_SC6000) += snd-sc6000.o
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index 5fd52e4..20becc8 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -2,9 +2,13 @@
/*
card-als100.c - driver for Avance Logic ALS100 based soundcards.
Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio@libero.it>
+ Copyright (C) 1999-2002 by Massimo Piccioni <dafastidio@libero.it>
Thanks to Pierfrancesco 'qM2' Passerini.
+ Generalised for soundcards based on DT-0196 and ALS-007 chips
+ by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>: June 2002.
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -33,10 +37,10 @@
#define PFX "als100: "
-MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
-MODULE_DESCRIPTION("Avance Logic ALS1X0");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Avance Logic,ALS100 - PRO16PNP},"
+MODULE_DESCRIPTION("Avance Logic ALS007/ALS1X0");
+MODULE_SUPPORTED_DEVICE("{{Diamond Technologies DT-019X},"
+ "{Avance Logic ALS-007}}"
+ "{{Avance Logic,ALS100 - PRO16PNP},"
"{Avance Logic,ALS110},"
"{Avance Logic,ALS120},"
"{Avance Logic,ALS200},"
@@ -45,9 +49,12 @@
"{Avance Logic,ALS120},"
"{RTL,RTL3000}}");
+MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
+MODULE_LICENSE("GPL");
+
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
@@ -57,14 +64,15 @@
static int dma16[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for als100 based soundcard.");
+MODULE_PARM_DESC(index, "Index value for Avance Logic based soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for als100 based soundcard.");
+MODULE_PARM_DESC(id, "ID string for Avance Logic based soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable als100 based soundcard.");
+MODULE_PARM_DESC(enable, "Enable Avance Logic based soundcard.");
+
+MODULE_ALIAS("snd-dt019x");
struct snd_card_als100 {
- int dev_no;
struct pnp_dev *dev;
struct pnp_dev *devmpu;
struct pnp_dev *devopl;
@@ -72,25 +80,43 @@
};
static struct pnp_card_device_id snd_als100_pnpids[] = {
+ /* DT197A30 */
+ { .id = "RWB1688",
+ .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } },
+ .driver_data = SB_HW_DT019X },
+ /* DT0196 / ALS-007 */
+ { .id = "ALS0007",
+ .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } },
+ .driver_data = SB_HW_DT019X },
/* ALS100 - PRO16PNP */
- { .id = "ALS0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
+ { .id = "ALS0001",
+ .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } },
+ .driver_data = SB_HW_ALS100 },
/* ALS110 - MF1000 - Digimate 3D Sound */
- { .id = "ALS0110", .devs = { { "@@@1001" }, { "@X@1001" }, { "@H@1001" } } },
+ { .id = "ALS0110",
+ .devs = { { "@@@1001" }, { "@X@1001" }, { "@H@1001" } },
+ .driver_data = SB_HW_ALS100 },
/* ALS120 */
- { .id = "ALS0120", .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } } },
+ { .id = "ALS0120",
+ .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } },
+ .driver_data = SB_HW_ALS100 },
/* ALS200 */
- { .id = "ALS0200", .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0001" } } },
+ { .id = "ALS0200",
+ .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0001" } },
+ .driver_data = SB_HW_ALS100 },
/* ALS200 OEM */
- { .id = "ALS0200", .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0020" } } },
+ { .id = "ALS0200",
+ .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0020" } },
+ .driver_data = SB_HW_ALS100 },
/* RTL3000 */
- { .id = "RTL3000", .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } } },
- { .id = "", } /* end */
+ { .id = "RTL3000",
+ .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } },
+ .driver_data = SB_HW_ALS100 },
+ { .id = "" } /* end */
};
MODULE_DEVICE_TABLE(pnp_card, snd_als100_pnpids);
-#define DRIVER_NAME "snd-card-als100"
-
static int __devinit snd_card_als100_pnp(int dev, struct snd_card_als100 *acard,
struct pnp_card_link *card,
const struct pnp_card_device_id *id)
@@ -113,8 +139,12 @@
return err;
}
port[dev] = pnp_port_start(pdev, 0);
- dma8[dev] = pnp_dma(pdev, 1);
- dma16[dev] = pnp_dma(pdev, 0);
+ if (id->driver_data == SB_HW_DT019X)
+ dma8[dev] = pnp_dma(pdev, 0);
+ else {
+ dma8[dev] = pnp_dma(pdev, 1);
+ dma16[dev] = pnp_dma(pdev, 0);
+ }
irq[dev] = pnp_irq(pdev, 0);
pdev = acard->devmpu;
@@ -175,22 +205,33 @@
}
snd_card_set_dev(card, &pcard->card->dev);
- if ((error = snd_sbdsp_create(card, port[dev],
- irq[dev],
- snd_sb16dsp_interrupt,
- dma8[dev],
- dma16[dev],
- SB_HW_ALS100, &chip)) < 0) {
+ if (pid->driver_data == SB_HW_DT019X)
+ dma16[dev] = -1;
+
+ error = snd_sbdsp_create(card, port[dev], irq[dev],
+ snd_sb16dsp_interrupt,
+ dma8[dev], dma16[dev],
+ pid->driver_data,
+ &chip);
+ if (error < 0) {
snd_card_free(card);
return error;
}
acard->chip = chip;
- strcpy(card->driver, "ALS100");
- strcpy(card->shortname, "Avance Logic ALS100");
- sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
- card->shortname, chip->name, chip->port,
- irq[dev], dma8[dev], dma16[dev]);
+ if (pid->driver_data == SB_HW_DT019X) {
+ strcpy(card->driver, "DT-019X");
+ strcpy(card->shortname, "Diamond Tech. DT-019X");
+ sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
+ card->shortname, chip->name, chip->port,
+ irq[dev], dma8[dev]);
+ } else {
+ strcpy(card->driver, "ALS100");
+ strcpy(card->shortname, "Avance Logic ALS100");
+ sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
+ card->shortname, chip->name, chip->port,
+ irq[dev], dma8[dev], dma16[dev]);
+ }
if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) {
snd_card_free(card);
@@ -203,9 +244,19 @@
}
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
- if (snd_mpu401_uart_new(card, 0, MPU401_HW_ALS100,
+ int mpu_type = MPU401_HW_ALS100;
+
+ if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
+ mpu_irq[dev] = -1;
+
+ if (pid->driver_data == SB_HW_DT019X)
+ mpu_type = MPU401_HW_MPU401;
+
+ if (snd_mpu401_uart_new(card, 0,
+ mpu_type,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
+ mpu_irq[dev],
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
@@ -291,7 +342,7 @@
static struct pnp_card_driver als100_pnpc_driver = {
.flags = PNP_DRIVER_RES_DISABLE,
- .name = "als100",
+ .name = "als100",
.id_table = snd_als100_pnpids,
.probe = snd_als100_pnp_detect,
.remove = __devexit_p(snd_als100_pnp_remove),
@@ -312,7 +363,7 @@
if (!als100_devices) {
pnp_unregister_card_driver(&als100_pnpc_driver);
#ifdef MODULE
- snd_printk(KERN_ERR "no ALS100 based soundcards found\n");
+ snd_printk(KERN_ERR "no Avance Logic based soundcards found\n");
#endif
return -ENODEV;
}
diff --git a/sound/isa/dt019x.c b/sound/isa/dt019x.c
deleted file mode 100644
index 80f5b1a..0000000
--- a/sound/isa/dt019x.c
+++ /dev/null
@@ -1,321 +0,0 @@
-
-/*
- dt019x.c - driver for Diamond Technologies DT-0197H based soundcards.
- Copyright (C) 1999, 2002 by Massimo Piccioni <dafastidio@libero.it>
-
- Generalised for soundcards based on DT-0196 and ALS-007 chips
- by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>: June 2002.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/pnp.h>
-#include <linux/moduleparam.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/mpu401.h>
-#include <sound/opl3.h>
-#include <sound/sb.h>
-
-#define PFX "dt019x: "
-
-MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
-MODULE_DESCRIPTION("Diamond Technologies DT-019X / Avance Logic ALS-007");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Diamond Technologies DT-019X},"
- "{Avance Logic ALS-007}}");
-
-static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
-static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
-static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
-static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
-static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
-static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* PnP setup */
-static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* PnP setup */
-static int dma8[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */
-
-module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for DT-019X based soundcard.");
-module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for DT-019X based soundcard.");
-module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable DT-019X based soundcard.");
-
-struct snd_card_dt019x {
- struct pnp_dev *dev;
- struct pnp_dev *devmpu;
- struct pnp_dev *devopl;
- struct snd_sb *chip;
-};
-
-static struct pnp_card_device_id snd_dt019x_pnpids[] = {
- /* DT197A30 */
- { .id = "RWB1688", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" }, } },
- /* DT0196 / ALS-007 */
- { .id = "ALS0007", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" }, } },
- { .id = "", }
-};
-
-MODULE_DEVICE_TABLE(pnp_card, snd_dt019x_pnpids);
-
-
-#define DRIVER_NAME "snd-card-dt019x"
-
-
-static int __devinit snd_card_dt019x_pnp(int dev, struct snd_card_dt019x *acard,
- struct pnp_card_link *card,
- const struct pnp_card_device_id *pid)
-{
- struct pnp_dev *pdev;
- int err;
-
- acard->dev = pnp_request_card_device(card, pid->devs[0].id, NULL);
- if (acard->dev == NULL)
- return -ENODEV;
-
- acard->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
- acard->devopl = pnp_request_card_device(card, pid->devs[2].id, NULL);
-
- pdev = acard->dev;
-
- err = pnp_activate_dev(pdev);
- if (err < 0) {
- snd_printk(KERN_ERR PFX "DT-019X AUDIO pnp configure failure\n");
- return err;
- }
-
- port[dev] = pnp_port_start(pdev, 0);
- dma8[dev] = pnp_dma(pdev, 0);
- irq[dev] = pnp_irq(pdev, 0);
- snd_printdd("dt019x: found audio interface: port=0x%lx, irq=0x%x, dma=0x%x\n",
- port[dev],irq[dev],dma8[dev]);
-
- pdev = acard->devmpu;
- if (pdev != NULL) {
- err = pnp_activate_dev(pdev);
- if (err < 0) {
- pnp_release_card_device(pdev);
- snd_printk(KERN_ERR PFX "DT-019X MPU401 pnp configure failure, skipping\n");
- goto __mpu_error;
- }
- mpu_port[dev] = pnp_port_start(pdev, 0);
- mpu_irq[dev] = pnp_irq(pdev, 0);
- snd_printdd("dt019x: found MPU-401: port=0x%lx, irq=0x%x\n",
- mpu_port[dev],mpu_irq[dev]);
- } else {
- __mpu_error:
- acard->devmpu = NULL;
- mpu_port[dev] = -1;
- }
-
- pdev = acard->devopl;
- if (pdev != NULL) {
- err = pnp_activate_dev(pdev);
- if (err < 0) {
- pnp_release_card_device(pdev);
- snd_printk(KERN_ERR PFX "DT-019X OPL3 pnp configure failure, skipping\n");
- goto __fm_error;
- }
- fm_port[dev] = pnp_port_start(pdev, 0);
- snd_printdd("dt019x: found OPL3 synth: port=0x%lx\n",fm_port[dev]);
- } else {
- __fm_error:
- acard->devopl = NULL;
- fm_port[dev] = -1;
- }
-
- return 0;
-}
-
-static int __devinit snd_card_dt019x_probe(int dev, struct pnp_card_link *pcard, const struct pnp_card_device_id *pid)
-{
- int error;
- struct snd_sb *chip;
- struct snd_card *card;
- struct snd_card_dt019x *acard;
- struct snd_opl3 *opl3;
-
- error = snd_card_create(index[dev], id[dev], THIS_MODULE,
- sizeof(struct snd_card_dt019x), &card);
- if (error < 0)
- return error;
- acard = card->private_data;
-
- snd_card_set_dev(card, &pcard->card->dev);
- if ((error = snd_card_dt019x_pnp(dev, acard, pcard, pid))) {
- snd_card_free(card);
- return error;
- }
-
- if ((error = snd_sbdsp_create(card, port[dev],
- irq[dev],
- snd_sb16dsp_interrupt,
- dma8[dev],
- -1,
- SB_HW_DT019X,
- &chip)) < 0) {
- snd_card_free(card);
- return error;
- }
- acard->chip = chip;
-
- strcpy(card->driver, "DT-019X");
- strcpy(card->shortname, "Diamond Tech. DT-019X");
- sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
- card->shortname, chip->name, chip->port,
- irq[dev], dma8[dev]);
-
- if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) {
- snd_card_free(card);
- return error;
- }
- if ((error = snd_sbmixer_new(chip)) < 0) {
- snd_card_free(card);
- return error;
- }
-
- if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
- if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
- mpu_irq[dev] = -1;
- if (snd_mpu401_uart_new(card, 0,
-/* MPU401_HW_SB,*/
- MPU401_HW_MPU401,
- mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
- NULL) < 0)
- snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx ?\n", mpu_port[dev]);
- }
-
- if (fm_port[dev] > 0 && fm_port[dev] != SNDRV_AUTO_PORT) {
- if (snd_opl3_create(card,
- fm_port[dev],
- fm_port[dev] + 2,
- OPL3_HW_AUTO, 0, &opl3) < 0) {
- snd_printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx ?\n",
- fm_port[dev], fm_port[dev] + 2);
- } else {
- if ((error = snd_opl3_timer_new(opl3, 0, 1)) < 0) {
- snd_card_free(card);
- return error;
- }
- if ((error = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
- snd_card_free(card);
- return error;
- }
- }
- }
-
- if ((error = snd_card_register(card)) < 0) {
- snd_card_free(card);
- return error;
- }
- pnp_set_card_drvdata(pcard, card);
- return 0;
-}
-
-static unsigned int __devinitdata dt019x_devices;
-
-static int __devinit snd_dt019x_pnp_probe(struct pnp_card_link *card,
- const struct pnp_card_device_id *pid)
-{
- static int dev;
- int res;
-
- for ( ; dev < SNDRV_CARDS; dev++) {
- if (!enable[dev])
- continue;
- res = snd_card_dt019x_probe(dev, card, pid);
- if (res < 0)
- return res;
- dev++;
- dt019x_devices++;
- return 0;
- }
- return -ENODEV;
-}
-
-static void __devexit snd_dt019x_pnp_remove(struct pnp_card_link * pcard)
-{
- snd_card_free(pnp_get_card_drvdata(pcard));
- pnp_set_card_drvdata(pcard, NULL);
-}
-
-#ifdef CONFIG_PM
-static int snd_dt019x_pnp_suspend(struct pnp_card_link *pcard, pm_message_t state)
-{
- struct snd_card *card = pnp_get_card_drvdata(pcard);
- struct snd_card_dt019x *acard = card->private_data;
- struct snd_sb *chip = acard->chip;
-
- snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- snd_pcm_suspend_all(chip->pcm);
- snd_sbmixer_suspend(chip);
- return 0;
-}
-
-static int snd_dt019x_pnp_resume(struct pnp_card_link *pcard)
-{
- struct snd_card *card = pnp_get_card_drvdata(pcard);
- struct snd_card_dt019x *acard = card->private_data;
- struct snd_sb *chip = acard->chip;
-
- snd_sbdsp_reset(chip);
- snd_sbmixer_resume(chip);
- snd_power_change_state(card, SNDRV_CTL_POWER_D0);
- return 0;
-}
-#endif
-
-static struct pnp_card_driver dt019x_pnpc_driver = {
- .flags = PNP_DRIVER_RES_DISABLE,
- .name = "dt019x",
- .id_table = snd_dt019x_pnpids,
- .probe = snd_dt019x_pnp_probe,
- .remove = __devexit_p(snd_dt019x_pnp_remove),
-#ifdef CONFIG_PM
- .suspend = snd_dt019x_pnp_suspend,
- .resume = snd_dt019x_pnp_resume,
-#endif
-};
-
-static int __init alsa_card_dt019x_init(void)
-{
- int err;
-
- err = pnp_register_card_driver(&dt019x_pnpc_driver);
- if (err)
- return err;
-
- if (!dt019x_devices) {
- pnp_unregister_card_driver(&dt019x_pnpc_driver);
-#ifdef MODULE
- snd_printk(KERN_ERR "no DT-019X / ALS-007 based soundcards found\n");
-#endif
- return -ENODEV;
- }
- return 0;
-}
-
-static void __exit alsa_card_dt019x_exit(void)
-{
- pnp_unregister_card_driver(&dt019x_pnpc_driver);
-}
-
-module_init(alsa_card_dt019x_init)
-module_exit(alsa_card_dt019x_exit)
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index c8a8da0..a4af53b 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -33,6 +33,7 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
+#include <sound/tlv.h>
#include <sound/wss.h>
#include <sound/mpu401.h>
#include <sound/opl3.h>
@@ -546,6 +547,93 @@
#ifdef OPTi93X
+static const DECLARE_TLV_DB_SCALE(db_scale_5bit_3db_step, -9300, 300, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_5bit, -4650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_4bit_12db_max, -3300, 300, 0);
+
+static struct snd_kcontrol_new snd_opti93x_controls[] = {
+WSS_DOUBLE("Master Playback Switch", 0,
+ OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Master Playback Volume", 0,
+ OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1,
+ db_scale_5bit_3db_step),
+WSS_DOUBLE_TLV("PCM Playback Volume", 0,
+ CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1,
+ db_scale_5bit),
+WSS_DOUBLE_TLV("FM Playback Volume", 0,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1,
+ db_scale_4bit_12db_max),
+WSS_DOUBLE("Line Playback Switch", 0,
+ CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Line Playback Volume", 0,
+ CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1,
+ db_scale_4bit_12db_max),
+WSS_DOUBLE("Mic Playback Switch", 0,
+ OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Mic Playback Volume", 0,
+ OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1,
+ db_scale_4bit_12db_max),
+WSS_DOUBLE_TLV("CD Playback Volume", 0,
+ CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1,
+ db_scale_4bit_12db_max),
+WSS_DOUBLE("Aux Playback Switch", 0,
+ OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Aux Playback Volume", 0,
+ OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1,
+ db_scale_4bit_12db_max),
+};
+
+static int __devinit snd_opti93x_mixer(struct snd_wss *chip)
+{
+ struct snd_card *card;
+ unsigned int idx;
+ struct snd_ctl_elem_id id1, id2;
+ int err;
+
+ if (snd_BUG_ON(!chip || !chip->pcm))
+ return -EINVAL;
+
+ card = chip->card;
+
+ strcpy(card->mixername, chip->pcm->name);
+
+ memset(&id1, 0, sizeof(id1));
+ memset(&id2, 0, sizeof(id2));
+ id1.iface = id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ /* reassign AUX0 switch to CD */
+ strcpy(id1.name, "Aux Playback Switch");
+ strcpy(id2.name, "CD Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0) {
+ snd_printk(KERN_ERR "Cannot rename opti93x control\n");
+ return err;
+ }
+ /* reassign AUX1 switch to FM */
+ strcpy(id1.name, "Aux Playback Switch"); id1.index = 1;
+ strcpy(id2.name, "FM Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0) {
+ snd_printk(KERN_ERR "Cannot rename opti93x control\n");
+ return err;
+ }
+ /* remove AUX1 volume */
+ strcpy(id1.name, "Aux Playback Volume"); id1.index = 1;
+ snd_ctl_remove_id(card, &id1);
+
+ /* Replace WSS volume controls with OPTi93x volume controls */
+ id1.index = 0;
+ for (idx = 0; idx < ARRAY_SIZE(snd_opti93x_controls); idx++) {
+ strcpy(id1.name, snd_opti93x_controls[idx].name);
+ snd_ctl_remove_id(card, &id1);
+
+ err = snd_ctl_add(card,
+ snd_ctl_new1(&snd_opti93x_controls[idx], chip));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
static irqreturn_t snd_opti93x_interrupt(int irq, void *dev_id)
{
struct snd_opti9xx *chip = dev_id;
@@ -754,6 +842,11 @@
error = snd_wss_mixer(codec);
if (error < 0)
return error;
+#ifdef OPTi93X
+ error = snd_opti93x_mixer(codec);
+ if (error < 0)
+ return error;
+#endif
#ifdef CS4231
error = snd_wss_timer(codec, 0, &timer);
if (error < 0)
diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile
index faeffceb..af36696 100644
--- a/sound/isa/sb/Makefile
+++ b/sound/isa/sb/Makefile
@@ -12,6 +12,7 @@
snd-sbawe-objs := sbawe.o emu8000.o
snd-emu8000-synth-objs := emu8000_synth.o emu8000_callback.o emu8000_patch.o emu8000_pcm.o
snd-es968-objs := es968.o
+snd-jazz16-objs := jazz16.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_SB_COMMON) += snd-sb-common.o
@@ -21,6 +22,7 @@
obj-$(CONFIG_SND_SB16) += snd-sb16.o
obj-$(CONFIG_SND_SBAWE) += snd-sbawe.o
obj-$(CONFIG_SND_ES968) += snd-es968.o
+obj-$(CONFIG_SND_JAZZ16) += snd-jazz16.o
ifeq ($(CONFIG_SND_SB16_CSP),y)
obj-$(CONFIG_SND_SB16) += snd-sb16-csp.o
obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
new file mode 100644
index 0000000..8d21a3f
--- /dev/null
+++ b/sound/isa/sb/jazz16.c
@@ -0,0 +1,404 @@
+
+/*
+ * jazz16.c - driver for Media Vision Jazz16 based soundcards.
+ * Copyright (C) 2009 Krzysztof Helt <krzysztof.h1@wp.pl>
+ * Based on patches posted by Rask Ingemann Lambertsen and Rene Herman.
+ * Based on OSS Sound Blaster driver.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <linux/isa.h>
+#include <sound/core.h>
+#include <sound/mpu401.h>
+#include <sound/opl3.h>
+#include <sound/sb.h>
+#define SNDRV_LEGACY_FIND_FREE_IRQ
+#define SNDRV_LEGACY_FIND_FREE_DMA
+#include <sound/initval.h>
+
+#define PFX "jazz16: "
+
+MODULE_DESCRIPTION("Media Vision Jazz16");
+MODULE_SUPPORTED_DEVICE("{{Media Vision ??? },"
+ "{RTL,RTL3000}}");
+
+MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
+MODULE_LICENSE("GPL");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
+static unsigned long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static unsigned long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int dma8[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static int dma16[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Media Vision Jazz16 based soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for Media Vision Jazz16 based soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable Media Vision Jazz16 based soundcard.");
+module_param_array(port, long, NULL, 0444);
+MODULE_PARM_DESC(port, "Port # for jazz16 driver.");
+module_param_array(mpu_port, long, NULL, 0444);
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for jazz16 driver.");
+module_param_array(irq, int, NULL, 0444);
+MODULE_PARM_DESC(irq, "IRQ # for jazz16 driver.");
+module_param_array(mpu_irq, int, NULL, 0444);
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for jazz16 driver.");
+module_param_array(dma8, int, NULL, 0444);
+MODULE_PARM_DESC(dma8, "DMA8 # for jazz16 driver.");
+module_param_array(dma16, int, NULL, 0444);
+MODULE_PARM_DESC(dma16, "DMA16 # for jazz16 driver.");
+
+#define SB_JAZZ16_WAKEUP 0xaf
+#define SB_JAZZ16_SET_PORTS 0x50
+#define SB_DSP_GET_JAZZ_BRD_REV 0xfa
+#define SB_JAZZ16_SET_DMAINTR 0xfb
+#define SB_DSP_GET_JAZZ_MODEL 0xfe
+
+struct snd_card_jazz16 {
+ struct snd_sb *chip;
+};
+
+static irqreturn_t jazz16_interrupt(int irq, void *chip)
+{
+ return snd_sb8dsp_interrupt(chip);
+}
+
+static int __devinit jazz16_configure_ports(unsigned long port,
+ unsigned long mpu_port, int idx)
+{
+ unsigned char val;
+
+ if (!request_region(0x201, 1, "jazz16 config")) {
+ snd_printk(KERN_ERR "config port region is already in use.\n");
+ return -EBUSY;
+ }
+ outb(SB_JAZZ16_WAKEUP - idx, 0x201);
+ udelay(100);
+ outb(SB_JAZZ16_SET_PORTS + idx, 0x201);
+ udelay(100);
+ val = port & 0x70;
+ val |= (mpu_port & 0x30) >> 4;
+ outb(val, 0x201);
+
+ release_region(0x201, 1);
+ return 0;
+}
+
+static int __devinit jazz16_detect_board(unsigned long port,
+ unsigned long mpu_port)
+{
+ int err;
+ int val;
+ struct snd_sb chip;
+
+ if (!request_region(port, 0x10, "jazz16")) {
+ snd_printk(KERN_ERR "I/O port region is already in use.\n");
+ return -EBUSY;
+ }
+ /* just to call snd_sbdsp_command/reset/get_byte() */
+ chip.port = port;
+
+ err = snd_sbdsp_reset(&chip);
+ if (err < 0)
+ for (val = 0; val < 4; val++) {
+ err = jazz16_configure_ports(port, mpu_port, val);
+ if (err < 0)
+ break;
+
+ err = snd_sbdsp_reset(&chip);
+ if (!err)
+ break;
+ }
+ if (err < 0) {
+ err = -ENODEV;
+ goto err_unmap;
+ }
+ if (!snd_sbdsp_command(&chip, SB_DSP_GET_JAZZ_BRD_REV)) {
+ err = -EBUSY;
+ goto err_unmap;
+ }
+ val = snd_sbdsp_get_byte(&chip);
+ if (val >= 0x30)
+ snd_sbdsp_get_byte(&chip);
+
+ if ((val & 0xf0) != 0x10) {
+ err = -ENODEV;
+ goto err_unmap;
+ }
+ if (!snd_sbdsp_command(&chip, SB_DSP_GET_JAZZ_MODEL)) {
+ err = -EBUSY;
+ goto err_unmap;
+ }
+ snd_sbdsp_get_byte(&chip);
+ err = snd_sbdsp_get_byte(&chip);
+ snd_printd("Media Vision Jazz16 board detected: rev 0x%x, model 0x%x\n",
+ val, err);
+
+ err = 0;
+
+err_unmap:
+ release_region(port, 0x10);
+ return err;
+}
+
+static int __devinit jazz16_configure_board(struct snd_sb *chip, int mpu_irq)
+{
+ static unsigned char jazz_irq_bits[] = { 0, 0, 2, 3, 0, 1, 0, 4,
+ 0, 2, 5, 0, 0, 0, 0, 6 };
+ static unsigned char jazz_dma_bits[] = { 0, 1, 0, 2, 0, 3, 0, 4 };
+
+ if (jazz_dma_bits[chip->dma8] == 0 ||
+ jazz_dma_bits[chip->dma16] == 0 ||
+ jazz_irq_bits[chip->irq] == 0)
+ return -EINVAL;
+
+ if (!snd_sbdsp_command(chip, SB_JAZZ16_SET_DMAINTR))
+ return -EBUSY;
+
+ if (!snd_sbdsp_command(chip,
+ jazz_dma_bits[chip->dma8] |
+ (jazz_dma_bits[chip->dma16] << 4)))
+ return -EBUSY;
+
+ if (!snd_sbdsp_command(chip,
+ jazz_irq_bits[chip->irq] |
+ (jazz_irq_bits[mpu_irq] << 4)))
+ return -EBUSY;
+
+ return 0;
+}
+
+static int __devinit snd_jazz16_match(struct device *devptr, unsigned int dev)
+{
+ if (!enable[dev])
+ return 0;
+ if (port[dev] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "please specify port\n");
+ return 0;
+ } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) {
+ snd_printk(KERN_ERR "incorrect port specified\n");
+ return 0;
+ }
+ if (dma8[dev] != SNDRV_AUTO_DMA &&
+ dma8[dev] != 1 && dma8[dev] != 3) {
+ snd_printk(KERN_ERR "dma8 must be 1 or 3\n");
+ return 0;
+ }
+ if (dma16[dev] != SNDRV_AUTO_DMA &&
+ dma16[dev] != 5 && dma16[dev] != 7) {
+ snd_printk(KERN_ERR "dma16 must be 5 or 7\n");
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ (mpu_port[dev] & ~0x030) != 0x300) {
+ snd_printk(KERN_ERR "incorrect mpu_port specified\n");
+ return 0;
+ }
+ if (mpu_irq[dev] != SNDRV_AUTO_DMA &&
+ mpu_irq[dev] != 2 && mpu_irq[dev] != 3 &&
+ mpu_irq[dev] != 5 && mpu_irq[dev] != 7) {
+ snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n");
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_jazz16_probe(struct device *devptr, unsigned int dev)
+{
+ struct snd_card *card;
+ struct snd_card_jazz16 *jazz16;
+ struct snd_sb *chip;
+ struct snd_opl3 *opl3;
+ static int possible_irqs[] = {2, 3, 5, 7, 9, 10, 15, -1};
+ static int possible_dmas8[] = {1, 3, -1};
+ static int possible_dmas16[] = {5, 7, -1};
+ int err, xirq, xdma8, xdma16, xmpu_port, xmpu_irq;
+
+ err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+ sizeof(struct snd_card_jazz16), &card);
+ if (err < 0)
+ return err;
+
+ jazz16 = card->private_data;
+
+ xirq = irq[dev];
+ if (xirq == SNDRV_AUTO_IRQ) {
+ xirq = snd_legacy_find_free_irq(possible_irqs);
+ if (xirq < 0) {
+ snd_printk(KERN_ERR "unable to find a free IRQ\n");
+ err = -EBUSY;
+ goto err_free;
+ }
+ }
+ xdma8 = dma8[dev];
+ if (xdma8 == SNDRV_AUTO_DMA) {
+ xdma8 = snd_legacy_find_free_dma(possible_dmas8);
+ if (xdma8 < 0) {
+ snd_printk(KERN_ERR "unable to find a free DMA8\n");
+ err = -EBUSY;
+ goto err_free;
+ }
+ }
+ xdma16 = dma16[dev];
+ if (xdma16 == SNDRV_AUTO_DMA) {
+ xdma16 = snd_legacy_find_free_dma(possible_dmas16);
+ if (xdma16 < 0) {
+ snd_printk(KERN_ERR "unable to find a free DMA16\n");
+ err = -EBUSY;
+ goto err_free;
+ }
+ }
+
+ xmpu_port = mpu_port[dev];
+ if (xmpu_port == SNDRV_AUTO_PORT)
+ xmpu_port = 0;
+ err = jazz16_detect_board(port[dev], xmpu_port);
+ if (err < 0) {
+ printk(KERN_ERR "Media Vision Jazz16 board not detected\n");
+ goto err_free;
+ }
+ err = snd_sbdsp_create(card, port[dev], irq[dev],
+ jazz16_interrupt,
+ dma8[dev], dma16[dev],
+ SB_HW_JAZZ16,
+ &chip);
+ if (err < 0)
+ goto err_free;
+
+ xmpu_irq = mpu_irq[dev];
+ if (xmpu_irq == SNDRV_AUTO_IRQ || mpu_port[dev] == SNDRV_AUTO_PORT)
+ xmpu_irq = 0;
+ err = jazz16_configure_board(chip, xmpu_irq);
+ if (err < 0) {
+ printk(KERN_ERR "Media Vision Jazz16 configuration failed\n");
+ goto err_free;
+ }
+
+ jazz16->chip = chip;
+
+ strcpy(card->driver, "jazz16");
+ strcpy(card->shortname, "Media Vision Jazz16");
+ sprintf(card->longname,
+ "Media Vision Jazz16 at 0x%lx, irq %d, dma8 %d, dma16 %d",
+ port[dev], xirq, xdma8, xdma16);
+
+ err = snd_sb8dsp_pcm(chip, 0, NULL);
+ if (err < 0)
+ goto err_free;
+ err = snd_sbmixer_new(chip);
+ if (err < 0)
+ goto err_free;
+
+ err = snd_opl3_create(card, chip->port, chip->port + 2,
+ OPL3_HW_AUTO, 1, &opl3);
+ if (err < 0)
+ snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n",
+ chip->port, chip->port + 2);
+ else {
+ err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (err < 0)
+ goto err_free;
+ }
+ if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
+ if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
+ mpu_irq[dev] = -1;
+
+ if (snd_mpu401_uart_new(card, 0,
+ MPU401_HW_MPU401,
+ mpu_port[dev], 0,
+ mpu_irq[dev],
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
+ NULL) < 0)
+ snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
+ mpu_port[dev]);
+ }
+
+ snd_card_set_dev(card, devptr);
+
+ err = snd_card_register(card);
+ if (err < 0)
+ goto err_free;
+
+ dev_set_drvdata(devptr, card);
+ return 0;
+
+err_free:
+ snd_card_free(card);
+ return err;
+}
+
+static int __devexit snd_jazz16_remove(struct device *devptr, unsigned int dev)
+{
+ struct snd_card *card = dev_get_drvdata(devptr);
+
+ dev_set_drvdata(devptr, NULL);
+ snd_card_free(card);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int snd_jazz16_suspend(struct device *pdev, unsigned int n,
+ pm_message_t state)
+{
+ struct snd_card *card = dev_get_drvdata(pdev);
+ struct snd_card_jazz16 *acard = card->private_data;
+ struct snd_sb *chip = acard->chip;
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+ snd_pcm_suspend_all(chip->pcm);
+ snd_sbmixer_suspend(chip);
+ return 0;
+}
+
+static int snd_jazz16_resume(struct device *pdev, unsigned int n)
+{
+ struct snd_card *card = dev_get_drvdata(pdev);
+ struct snd_card_jazz16 *acard = card->private_data;
+ struct snd_sb *chip = acard->chip;
+
+ snd_sbdsp_reset(chip);
+ snd_sbmixer_resume(chip);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ return 0;
+}
+#endif
+
+static struct isa_driver snd_jazz16_driver = {
+ .match = snd_jazz16_match,
+ .probe = snd_jazz16_probe,
+ .remove = __devexit_p(snd_jazz16_remove),
+#ifdef CONFIG_PM
+ .suspend = snd_jazz16_suspend,
+ .resume = snd_jazz16_resume,
+#endif
+ .driver = {
+ .name = "jazz16"
+ },
+};
+
+static int __init alsa_card_jazz16_init(void)
+{
+ return isa_register_driver(&snd_jazz16_driver, SNDRV_CARDS);
+}
+
+static void __exit alsa_card_jazz16_exit(void)
+{
+ isa_unregister_driver(&snd_jazz16_driver);
+}
+
+module_init(alsa_card_jazz16_init)
+module_exit(alsa_card_jazz16_exit)
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 658d557..7d84c9f 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -106,9 +106,21 @@
struct snd_sb *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned int mixreg, rate, size, count;
+ unsigned char format;
+ unsigned char stereo = runtime->channels > 1;
+ int dma;
rate = runtime->rate;
switch (chip->hardware) {
+ case SB_HW_JAZZ16:
+ if (runtime->format == SNDRV_PCM_FORMAT_S16_LE) {
+ if (chip->mode & SB_MODE_CAPTURE_16)
+ return -EBUSY;
+ else
+ chip->mode |= SB_MODE_PLAYBACK_16;
+ }
+ chip->playback_format = SB_DSP_LO_OUTPUT_AUTO;
+ break;
case SB_HW_PRO:
if (runtime->channels > 1) {
if (snd_BUG_ON(rate != SB8_RATE(11025) &&
@@ -133,11 +145,21 @@
default:
return -EINVAL;
}
+ if (chip->mode & SB_MODE_PLAYBACK_16) {
+ format = stereo ? SB_DSP_STEREO_16BIT : SB_DSP_MONO_16BIT;
+ dma = chip->dma16;
+ } else {
+ format = stereo ? SB_DSP_STEREO_8BIT : SB_DSP_MONO_8BIT;
+ chip->mode |= SB_MODE_PLAYBACK_8;
+ dma = chip->dma8;
+ }
size = chip->p_dma_size = snd_pcm_lib_buffer_bytes(substream);
count = chip->p_period_size = snd_pcm_lib_period_bytes(substream);
spin_lock_irqsave(&chip->reg_lock, flags);
snd_sbdsp_command(chip, SB_DSP_SPEAKER_ON);
- if (runtime->channels > 1) {
+ if (chip->hardware == SB_HW_JAZZ16)
+ snd_sbdsp_command(chip, format);
+ else if (stereo) {
/* set playback stereo mode */
spin_lock(&chip->mixer_lock);
mixreg = snd_sbmixer_read(chip, SB_DSP_STEREO_SW);
@@ -147,15 +169,14 @@
/* Soundblaster hardware programming reference guide, 3-23 */
snd_sbdsp_command(chip, SB_DSP_DMA8_EXIT);
runtime->dma_area[0] = 0x80;
- snd_dma_program(chip->dma8, runtime->dma_addr, 1, DMA_MODE_WRITE);
+ snd_dma_program(dma, runtime->dma_addr, 1, DMA_MODE_WRITE);
/* force interrupt */
- chip->mode = SB_MODE_HALT;
snd_sbdsp_command(chip, SB_DSP_OUTPUT);
snd_sbdsp_command(chip, 0);
snd_sbdsp_command(chip, 0);
}
snd_sbdsp_command(chip, SB_DSP_SAMPLE_RATE);
- if (runtime->channels > 1) {
+ if (stereo) {
snd_sbdsp_command(chip, 256 - runtime->rate_den / 2);
spin_lock(&chip->mixer_lock);
/* save output filter status and turn it off */
@@ -168,13 +189,15 @@
snd_sbdsp_command(chip, 256 - runtime->rate_den);
}
if (chip->playback_format != SB_DSP_OUTPUT) {
+ if (chip->mode & SB_MODE_PLAYBACK_16)
+ count /= 2;
count--;
snd_sbdsp_command(chip, SB_DSP_BLOCK_SIZE);
snd_sbdsp_command(chip, count & 0xff);
snd_sbdsp_command(chip, count >> 8);
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
- snd_dma_program(chip->dma8, runtime->dma_addr,
+ snd_dma_program(dma, runtime->dma_addr,
size, DMA_MODE_WRITE | DMA_AUTOINIT);
return 0;
}
@@ -212,7 +235,6 @@
snd_sbdsp_command(chip, SB_DSP_SPEAKER_OFF);
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
- chip->mode = (cmd == SNDRV_PCM_TRIGGER_START) ? SB_MODE_PLAYBACK_8 : SB_MODE_HALT;
return 0;
}
@@ -234,9 +256,21 @@
struct snd_sb *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned int mixreg, rate, size, count;
+ unsigned char format;
+ unsigned char stereo = runtime->channels > 1;
+ int dma;
rate = runtime->rate;
switch (chip->hardware) {
+ case SB_HW_JAZZ16:
+ if (runtime->format == SNDRV_PCM_FORMAT_S16_LE) {
+ if (chip->mode & SB_MODE_PLAYBACK_16)
+ return -EBUSY;
+ else
+ chip->mode |= SB_MODE_CAPTURE_16;
+ }
+ chip->capture_format = SB_DSP_LO_INPUT_AUTO;
+ break;
case SB_HW_PRO:
if (runtime->channels > 1) {
if (snd_BUG_ON(rate != SB8_RATE(11025) &&
@@ -262,14 +296,24 @@
default:
return -EINVAL;
}
+ if (chip->mode & SB_MODE_CAPTURE_16) {
+ format = stereo ? SB_DSP_STEREO_16BIT : SB_DSP_MONO_16BIT;
+ dma = chip->dma16;
+ } else {
+ format = stereo ? SB_DSP_STEREO_8BIT : SB_DSP_MONO_8BIT;
+ chip->mode |= SB_MODE_CAPTURE_8;
+ dma = chip->dma8;
+ }
size = chip->c_dma_size = snd_pcm_lib_buffer_bytes(substream);
count = chip->c_period_size = snd_pcm_lib_period_bytes(substream);
spin_lock_irqsave(&chip->reg_lock, flags);
snd_sbdsp_command(chip, SB_DSP_SPEAKER_OFF);
- if (runtime->channels > 1)
+ if (chip->hardware == SB_HW_JAZZ16)
+ snd_sbdsp_command(chip, format);
+ else if (stereo)
snd_sbdsp_command(chip, SB_DSP_STEREO_8BIT);
snd_sbdsp_command(chip, SB_DSP_SAMPLE_RATE);
- if (runtime->channels > 1) {
+ if (stereo) {
snd_sbdsp_command(chip, 256 - runtime->rate_den / 2);
spin_lock(&chip->mixer_lock);
/* save input filter status and turn it off */
@@ -282,13 +326,15 @@
snd_sbdsp_command(chip, 256 - runtime->rate_den);
}
if (chip->capture_format != SB_DSP_INPUT) {
+ if (chip->mode & SB_MODE_PLAYBACK_16)
+ count /= 2;
count--;
snd_sbdsp_command(chip, SB_DSP_BLOCK_SIZE);
snd_sbdsp_command(chip, count & 0xff);
snd_sbdsp_command(chip, count >> 8);
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
- snd_dma_program(chip->dma8, runtime->dma_addr,
+ snd_dma_program(dma, runtime->dma_addr,
size, DMA_MODE_READ | DMA_AUTOINIT);
return 0;
}
@@ -328,7 +374,6 @@
snd_sbdsp_command(chip, SB_DSP_SPEAKER_OFF);
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
- chip->mode = (cmd == SNDRV_PCM_TRIGGER_START) ? SB_MODE_CAPTURE_8 : SB_MODE_HALT;
return 0;
}
@@ -339,13 +384,21 @@
snd_sb_ack_8bit(chip);
switch (chip->mode) {
- case SB_MODE_PLAYBACK_8: /* ok.. playback is active */
+ case SB_MODE_PLAYBACK_16: /* ok.. playback is active */
+ if (chip->hardware != SB_HW_JAZZ16)
+ break;
+ /* fallthru */
+ case SB_MODE_PLAYBACK_8:
substream = chip->playback_substream;
runtime = substream->runtime;
if (chip->playback_format == SB_DSP_OUTPUT)
snd_sb8_playback_trigger(substream, SNDRV_PCM_TRIGGER_START);
snd_pcm_period_elapsed(substream);
break;
+ case SB_MODE_CAPTURE_16:
+ if (chip->hardware != SB_HW_JAZZ16)
+ break;
+ /* fallthru */
case SB_MODE_CAPTURE_8:
substream = chip->capture_substream;
runtime = substream->runtime;
@@ -361,10 +414,15 @@
{
struct snd_sb *chip = snd_pcm_substream_chip(substream);
size_t ptr;
+ int dma;
- if (chip->mode != SB_MODE_PLAYBACK_8)
+ if (chip->mode & SB_MODE_PLAYBACK_8)
+ dma = chip->dma8;
+ else if (chip->mode & SB_MODE_PLAYBACK_16)
+ dma = chip->dma16;
+ else
return 0;
- ptr = snd_dma_pointer(chip->dma8, chip->p_dma_size);
+ ptr = snd_dma_pointer(dma, chip->p_dma_size);
return bytes_to_frames(substream->runtime, ptr);
}
@@ -372,10 +430,15 @@
{
struct snd_sb *chip = snd_pcm_substream_chip(substream);
size_t ptr;
+ int dma;
- if (chip->mode != SB_MODE_CAPTURE_8)
+ if (chip->mode & SB_MODE_CAPTURE_8)
+ dma = chip->dma8;
+ else if (chip->mode & SB_MODE_CAPTURE_16)
+ dma = chip->dma16;
+ else
return 0;
- ptr = snd_dma_pointer(chip->dma8, chip->c_dma_size);
+ ptr = snd_dma_pointer(dma, chip->c_dma_size);
return bytes_to_frames(substream->runtime, ptr);
}
@@ -446,6 +509,14 @@
runtime->hw = snd_sb8_capture;
}
switch (chip->hardware) {
+ case SB_HW_JAZZ16:
+ if (chip->dma16 == 5 || chip->dma16 == 7)
+ runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
+ runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000;
+ runtime->hw.rate_min = 4000;
+ runtime->hw.rate_max = 50000;
+ runtime->hw.channels_max = 2;
+ break;
case SB_HW_PRO:
runtime->hw.rate_max = 44100;
runtime->hw.channels_max = 2;
@@ -468,6 +539,14 @@
}
snd_pcm_hw_constraint_ratnums(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&hw_constraints_clock);
+ if (chip->dma8 > 3 || chip->dma16 >= 0) {
+ snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 2);
+ snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 2);
+ runtime->hw.buffer_bytes_max = 128 * 1024 * 1024;
+ runtime->hw.period_bytes_max = 128 * 1024 * 1024;
+ }
return 0;
}
@@ -480,6 +559,10 @@
chip->capture_substream = NULL;
spin_lock_irqsave(&chip->open_lock, flags);
chip->open &= ~SB_OPEN_PCM;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ chip->mode &= ~SB_MODE_PLAYBACK;
+ else
+ chip->mode &= ~SB_MODE_CAPTURE;
spin_unlock_irqrestore(&chip->open_lock, flags);
return 0;
}
@@ -515,6 +598,7 @@
struct snd_card *card = chip->card;
struct snd_pcm *pcm;
int err;
+ size_t max_prealloc = 64 * 1024;
if (rpcm)
*rpcm = NULL;
@@ -527,9 +611,11 @@
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sb8_playback_ops);
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_sb8_capture_ops);
+ if (chip->dma8 > 3 || chip->dma16 >= 0)
+ max_prealloc = 128 * 1024;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
snd_dma_isa_data(),
- 64*1024, 64*1024);
+ 64*1024, max_prealloc);
if (rpcm)
*rpcm = pcm;
diff --git a/sound/isa/sb/sb_common.c b/sound/isa/sb/sb_common.c
index 27a6515..eae6c1c 100644
--- a/sound/isa/sb/sb_common.c
+++ b/sound/isa/sb/sb_common.c
@@ -170,6 +170,9 @@
case SB_HW_CS5530:
str = "16 (CS5530)";
break;
+ case SB_HW_JAZZ16:
+ str = "Pro (Jazz16)";
+ break;
default:
return -ENODEV;
}
diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c
index 318ff0c..6496822 100644
--- a/sound/isa/sb/sb_mixer.c
+++ b/sound/isa/sb/sb_mixer.c
@@ -528,20 +528,11 @@
* SB 2.0 specific mixer elements
*/
-static struct sbmix_elem snd_sb20_ctl_master_play_vol =
- SB_SINGLE("Master Playback Volume", SB_DSP20_MASTER_DEV, 1, 7);
-static struct sbmix_elem snd_sb20_ctl_pcm_play_vol =
- SB_SINGLE("PCM Playback Volume", SB_DSP20_PCM_DEV, 1, 3);
-static struct sbmix_elem snd_sb20_ctl_synth_play_vol =
- SB_SINGLE("Synth Playback Volume", SB_DSP20_FM_DEV, 1, 7);
-static struct sbmix_elem snd_sb20_ctl_cd_play_vol =
- SB_SINGLE("CD Playback Volume", SB_DSP20_CD_DEV, 1, 7);
-
-static struct sbmix_elem *snd_sb20_controls[] = {
- &snd_sb20_ctl_master_play_vol,
- &snd_sb20_ctl_pcm_play_vol,
- &snd_sb20_ctl_synth_play_vol,
- &snd_sb20_ctl_cd_play_vol
+static struct sbmix_elem snd_sb20_controls[] = {
+ SB_SINGLE("Master Playback Volume", SB_DSP20_MASTER_DEV, 1, 7),
+ SB_SINGLE("PCM Playback Volume", SB_DSP20_PCM_DEV, 1, 3),
+ SB_SINGLE("Synth Playback Volume", SB_DSP20_FM_DEV, 1, 7),
+ SB_SINGLE("CD Playback Volume", SB_DSP20_CD_DEV, 1, 7)
};
static unsigned char snd_sb20_init_values[][2] = {
@@ -552,41 +543,24 @@
/*
* SB Pro specific mixer elements
*/
-static struct sbmix_elem snd_sbpro_ctl_master_play_vol =
- SB_DOUBLE("Master Playback Volume", SB_DSP_MASTER_DEV, SB_DSP_MASTER_DEV, 5, 1, 7);
-static struct sbmix_elem snd_sbpro_ctl_pcm_play_vol =
- SB_DOUBLE("PCM Playback Volume", SB_DSP_PCM_DEV, SB_DSP_PCM_DEV, 5, 1, 7);
-static struct sbmix_elem snd_sbpro_ctl_pcm_play_filter =
- SB_SINGLE("PCM Playback Filter", SB_DSP_PLAYBACK_FILT, 5, 1);
-static struct sbmix_elem snd_sbpro_ctl_synth_play_vol =
- SB_DOUBLE("Synth Playback Volume", SB_DSP_FM_DEV, SB_DSP_FM_DEV, 5, 1, 7);
-static struct sbmix_elem snd_sbpro_ctl_cd_play_vol =
- SB_DOUBLE("CD Playback Volume", SB_DSP_CD_DEV, SB_DSP_CD_DEV, 5, 1, 7);
-static struct sbmix_elem snd_sbpro_ctl_line_play_vol =
- SB_DOUBLE("Line Playback Volume", SB_DSP_LINE_DEV, SB_DSP_LINE_DEV, 5, 1, 7);
-static struct sbmix_elem snd_sbpro_ctl_mic_play_vol =
- SB_SINGLE("Mic Playback Volume", SB_DSP_MIC_DEV, 1, 3);
-static struct sbmix_elem snd_sbpro_ctl_capture_source =
+static struct sbmix_elem snd_sbpro_controls[] = {
+ SB_DOUBLE("Master Playback Volume",
+ SB_DSP_MASTER_DEV, SB_DSP_MASTER_DEV, 5, 1, 7),
+ SB_DOUBLE("PCM Playback Volume",
+ SB_DSP_PCM_DEV, SB_DSP_PCM_DEV, 5, 1, 7),
+ SB_SINGLE("PCM Playback Filter", SB_DSP_PLAYBACK_FILT, 5, 1),
+ SB_DOUBLE("Synth Playback Volume",
+ SB_DSP_FM_DEV, SB_DSP_FM_DEV, 5, 1, 7),
+ SB_DOUBLE("CD Playback Volume", SB_DSP_CD_DEV, SB_DSP_CD_DEV, 5, 1, 7),
+ SB_DOUBLE("Line Playback Volume",
+ SB_DSP_LINE_DEV, SB_DSP_LINE_DEV, 5, 1, 7),
+ SB_SINGLE("Mic Playback Volume", SB_DSP_MIC_DEV, 1, 3),
{
.name = "Capture Source",
.type = SB_MIX_CAPTURE_PRO
- };
-static struct sbmix_elem snd_sbpro_ctl_capture_filter =
- SB_SINGLE("Capture Filter", SB_DSP_CAPTURE_FILT, 5, 1);
-static struct sbmix_elem snd_sbpro_ctl_capture_low_filter =
- SB_SINGLE("Capture Low-Pass Filter", SB_DSP_CAPTURE_FILT, 3, 1);
-
-static struct sbmix_elem *snd_sbpro_controls[] = {
- &snd_sbpro_ctl_master_play_vol,
- &snd_sbpro_ctl_pcm_play_vol,
- &snd_sbpro_ctl_pcm_play_filter,
- &snd_sbpro_ctl_synth_play_vol,
- &snd_sbpro_ctl_cd_play_vol,
- &snd_sbpro_ctl_line_play_vol,
- &snd_sbpro_ctl_mic_play_vol,
- &snd_sbpro_ctl_capture_source,
- &snd_sbpro_ctl_capture_filter,
- &snd_sbpro_ctl_capture_low_filter
+ },
+ SB_SINGLE("Capture Filter", SB_DSP_CAPTURE_FILT, 5, 1),
+ SB_SINGLE("Capture Low-Pass Filter", SB_DSP_CAPTURE_FILT, 3, 1)
};
static unsigned char snd_sbpro_init_values[][2] = {
@@ -598,68 +572,42 @@
/*
* SB16 specific mixer elements
*/
-static struct sbmix_elem snd_sb16_ctl_master_play_vol =
- SB_DOUBLE("Master Playback Volume", SB_DSP4_MASTER_DEV, (SB_DSP4_MASTER_DEV + 1), 3, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_3d_enhance_switch =
- SB_SINGLE("3D Enhancement Switch", SB_DSP4_3DSE, 0, 1);
-static struct sbmix_elem snd_sb16_ctl_tone_bass =
- SB_DOUBLE("Tone Control - Bass", SB_DSP4_BASS_DEV, (SB_DSP4_BASS_DEV + 1), 4, 4, 15);
-static struct sbmix_elem snd_sb16_ctl_tone_treble =
- SB_DOUBLE("Tone Control - Treble", SB_DSP4_TREBLE_DEV, (SB_DSP4_TREBLE_DEV + 1), 4, 4, 15);
-static struct sbmix_elem snd_sb16_ctl_pcm_play_vol =
- SB_DOUBLE("PCM Playback Volume", SB_DSP4_PCM_DEV, (SB_DSP4_PCM_DEV + 1), 3, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_synth_capture_route =
- SB16_INPUT_SW("Synth Capture Route", SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 6, 5);
-static struct sbmix_elem snd_sb16_ctl_synth_play_vol =
- SB_DOUBLE("Synth Playback Volume", SB_DSP4_SYNTH_DEV, (SB_DSP4_SYNTH_DEV + 1), 3, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_cd_capture_route =
- SB16_INPUT_SW("CD Capture Route", SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 2, 1);
-static struct sbmix_elem snd_sb16_ctl_cd_play_switch =
- SB_DOUBLE("CD Playback Switch", SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 2, 1, 1);
-static struct sbmix_elem snd_sb16_ctl_cd_play_vol =
- SB_DOUBLE("CD Playback Volume", SB_DSP4_CD_DEV, (SB_DSP4_CD_DEV + 1), 3, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_line_capture_route =
- SB16_INPUT_SW("Line Capture Route", SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 4, 3);
-static struct sbmix_elem snd_sb16_ctl_line_play_switch =
- SB_DOUBLE("Line Playback Switch", SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 4, 3, 1);
-static struct sbmix_elem snd_sb16_ctl_line_play_vol =
- SB_DOUBLE("Line Playback Volume", SB_DSP4_LINE_DEV, (SB_DSP4_LINE_DEV + 1), 3, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_mic_capture_route =
- SB16_INPUT_SW("Mic Capture Route", SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 0, 0);
-static struct sbmix_elem snd_sb16_ctl_mic_play_switch =
- SB_SINGLE("Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1);
-static struct sbmix_elem snd_sb16_ctl_mic_play_vol =
- SB_SINGLE("Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31);
-static struct sbmix_elem snd_sb16_ctl_pc_speaker_vol =
- SB_SINGLE("Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3);
-static struct sbmix_elem snd_sb16_ctl_capture_vol =
- SB_DOUBLE("Capture Volume", SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3);
-static struct sbmix_elem snd_sb16_ctl_play_vol =
- SB_DOUBLE("Playback Volume", SB_DSP4_OGAIN_DEV, (SB_DSP4_OGAIN_DEV + 1), 6, 6, 3);
-static struct sbmix_elem snd_sb16_ctl_auto_mic_gain =
- SB_SINGLE("Mic Auto Gain", SB_DSP4_MIC_AGC, 0, 1);
-
-static struct sbmix_elem *snd_sb16_controls[] = {
- &snd_sb16_ctl_master_play_vol,
- &snd_sb16_ctl_3d_enhance_switch,
- &snd_sb16_ctl_tone_bass,
- &snd_sb16_ctl_tone_treble,
- &snd_sb16_ctl_pcm_play_vol,
- &snd_sb16_ctl_synth_capture_route,
- &snd_sb16_ctl_synth_play_vol,
- &snd_sb16_ctl_cd_capture_route,
- &snd_sb16_ctl_cd_play_switch,
- &snd_sb16_ctl_cd_play_vol,
- &snd_sb16_ctl_line_capture_route,
- &snd_sb16_ctl_line_play_switch,
- &snd_sb16_ctl_line_play_vol,
- &snd_sb16_ctl_mic_capture_route,
- &snd_sb16_ctl_mic_play_switch,
- &snd_sb16_ctl_mic_play_vol,
- &snd_sb16_ctl_pc_speaker_vol,
- &snd_sb16_ctl_capture_vol,
- &snd_sb16_ctl_play_vol,
- &snd_sb16_ctl_auto_mic_gain
+static struct sbmix_elem snd_sb16_controls[] = {
+ SB_DOUBLE("Master Playback Volume",
+ SB_DSP4_MASTER_DEV, (SB_DSP4_MASTER_DEV + 1), 3, 3, 31),
+ SB_DOUBLE("PCM Playback Volume",
+ SB_DSP4_PCM_DEV, (SB_DSP4_PCM_DEV + 1), 3, 3, 31),
+ SB16_INPUT_SW("Synth Capture Route",
+ SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 6, 5),
+ SB_DOUBLE("Synth Playback Volume",
+ SB_DSP4_SYNTH_DEV, (SB_DSP4_SYNTH_DEV + 1), 3, 3, 31),
+ SB16_INPUT_SW("CD Capture Route",
+ SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 2, 1),
+ SB_DOUBLE("CD Playback Switch",
+ SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 2, 1, 1),
+ SB_DOUBLE("CD Playback Volume",
+ SB_DSP4_CD_DEV, (SB_DSP4_CD_DEV + 1), 3, 3, 31),
+ SB16_INPUT_SW("Mic Capture Route",
+ SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 0, 0),
+ SB_SINGLE("Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1),
+ SB_SINGLE("Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31),
+ SB_SINGLE("Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
+ SB_DOUBLE("Capture Volume",
+ SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3),
+ SB_DOUBLE("Playback Volume",
+ SB_DSP4_OGAIN_DEV, (SB_DSP4_OGAIN_DEV + 1), 6, 6, 3),
+ SB16_INPUT_SW("Line Capture Route",
+ SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 4, 3),
+ SB_DOUBLE("Line Playback Switch",
+ SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 4, 3, 1),
+ SB_DOUBLE("Line Playback Volume",
+ SB_DSP4_LINE_DEV, (SB_DSP4_LINE_DEV + 1), 3, 3, 31),
+ SB_SINGLE("Mic Auto Gain", SB_DSP4_MIC_AGC, 0, 1),
+ SB_SINGLE("3D Enhancement Switch", SB_DSP4_3DSE, 0, 1),
+ SB_DOUBLE("Tone Control - Bass",
+ SB_DSP4_BASS_DEV, (SB_DSP4_BASS_DEV + 1), 4, 4, 15),
+ SB_DOUBLE("Tone Control - Treble",
+ SB_DSP4_TREBLE_DEV, (SB_DSP4_TREBLE_DEV + 1), 4, 4, 15)
};
static unsigned char snd_sb16_init_values[][2] = {
@@ -678,46 +626,34 @@
/*
* DT019x specific mixer elements
*/
-static struct sbmix_elem snd_dt019x_ctl_master_play_vol =
- SB_DOUBLE("Master Playback Volume", SB_DT019X_MASTER_DEV, SB_DT019X_MASTER_DEV, 4,0, 15);
-static struct sbmix_elem snd_dt019x_ctl_pcm_play_vol =
- SB_DOUBLE("PCM Playback Volume", SB_DT019X_PCM_DEV, SB_DT019X_PCM_DEV, 4,0, 15);
-static struct sbmix_elem snd_dt019x_ctl_synth_play_vol =
- SB_DOUBLE("Synth Playback Volume", SB_DT019X_SYNTH_DEV, SB_DT019X_SYNTH_DEV, 4,0, 15);
-static struct sbmix_elem snd_dt019x_ctl_cd_play_vol =
- SB_DOUBLE("CD Playback Volume", SB_DT019X_CD_DEV, SB_DT019X_CD_DEV, 4,0, 15);
-static struct sbmix_elem snd_dt019x_ctl_mic_play_vol =
- SB_SINGLE("Mic Playback Volume", SB_DT019X_MIC_DEV, 4, 7);
-static struct sbmix_elem snd_dt019x_ctl_pc_speaker_vol =
- SB_SINGLE("Beep Volume", SB_DT019X_SPKR_DEV, 0, 7);
-static struct sbmix_elem snd_dt019x_ctl_line_play_vol =
- SB_DOUBLE("Line Playback Volume", SB_DT019X_LINE_DEV, SB_DT019X_LINE_DEV, 4,0, 15);
-static struct sbmix_elem snd_dt019x_ctl_pcm_play_switch =
- SB_DOUBLE("PCM Playback Switch", SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 2,1, 1);
-static struct sbmix_elem snd_dt019x_ctl_synth_play_switch =
- SB_DOUBLE("Synth Playback Switch", SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 4,3, 1);
-static struct sbmix_elem snd_dt019x_ctl_capture_source =
+static struct sbmix_elem snd_dt019x_controls[] = {
+ /* ALS4000 below has some parts which we might be lacking,
+ * e.g. snd_als4000_ctl_mono_playback_switch - check it! */
+ SB_DOUBLE("Master Playback Volume",
+ SB_DT019X_MASTER_DEV, SB_DT019X_MASTER_DEV, 4, 0, 15),
+ SB_DOUBLE("PCM Playback Switch",
+ SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 2, 1, 1),
+ SB_DOUBLE("PCM Playback Volume",
+ SB_DT019X_PCM_DEV, SB_DT019X_PCM_DEV, 4, 0, 15),
+ SB_DOUBLE("Synth Playback Switch",
+ SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 4, 3, 1),
+ SB_DOUBLE("Synth Playback Volume",
+ SB_DT019X_SYNTH_DEV, SB_DT019X_SYNTH_DEV, 4, 0, 15),
+ SB_DOUBLE("CD Playback Switch",
+ SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 2, 1, 1),
+ SB_DOUBLE("CD Playback Volume",
+ SB_DT019X_CD_DEV, SB_DT019X_CD_DEV, 4, 0, 15),
+ SB_SINGLE("Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1),
+ SB_SINGLE("Mic Playback Volume", SB_DT019X_MIC_DEV, 4, 7),
+ SB_SINGLE("Beep Volume", SB_DT019X_SPKR_DEV, 0, 7),
+ SB_DOUBLE("Line Playback Switch",
+ SB_DSP4_OUTPUT_SW, SB_DSP4_OUTPUT_SW, 4, 3, 1),
+ SB_DOUBLE("Line Playback Volume",
+ SB_DT019X_LINE_DEV, SB_DT019X_LINE_DEV, 4, 0, 15),
{
.name = "Capture Source",
.type = SB_MIX_CAPTURE_DT019X
- };
-
-static struct sbmix_elem *snd_dt019x_controls[] = {
- /* ALS4000 below has some parts which we might be lacking,
- * e.g. snd_als4000_ctl_mono_playback_switch - check it! */
- &snd_dt019x_ctl_master_play_vol,
- &snd_dt019x_ctl_pcm_play_vol,
- &snd_dt019x_ctl_synth_play_vol,
- &snd_dt019x_ctl_cd_play_vol,
- &snd_dt019x_ctl_mic_play_vol,
- &snd_dt019x_ctl_pc_speaker_vol,
- &snd_dt019x_ctl_line_play_vol,
- &snd_sb16_ctl_mic_play_switch,
- &snd_sb16_ctl_cd_play_switch,
- &snd_sb16_ctl_line_play_switch,
- &snd_dt019x_ctl_pcm_play_switch,
- &snd_dt019x_ctl_synth_play_switch,
- &snd_dt019x_ctl_capture_source
+ }
};
static unsigned char snd_dt019x_init_values[][2] = {
@@ -735,82 +671,37 @@
/*
* ALS4000 specific mixer elements
*/
-static struct sbmix_elem snd_als4000_ctl_master_mono_playback_switch =
- SB_SINGLE("Master Mono Playback Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1);
-static struct sbmix_elem snd_als4k_ctl_master_mono_capture_route = {
+static struct sbmix_elem snd_als4000_controls[] = {
+ SB_DOUBLE("PCM Playback Switch",
+ SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 2, 1, 1),
+ SB_DOUBLE("Synth Playback Switch",
+ SB_DT019X_OUTPUT_SW2, SB_DT019X_OUTPUT_SW2, 4, 3, 1),
+ SB_SINGLE("Mic Boost (+20dB)", SB_ALS4000_MIC_IN_GAIN, 0, 0x03),
+ SB_SINGLE("Master Mono Playback Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1),
+ {
.name = "Master Mono Capture Route",
.type = SB_MIX_MONO_CAPTURE_ALS4K
- };
-static struct sbmix_elem snd_als4000_ctl_mono_playback_switch =
- SB_SINGLE("Mono Playback Switch", SB_DT019X_OUTPUT_SW2, 0, 1);
-static struct sbmix_elem snd_als4000_ctl_mic_20db_boost =
- SB_SINGLE("Mic Boost (+20dB)", SB_ALS4000_MIC_IN_GAIN, 0, 0x03);
-static struct sbmix_elem snd_als4000_ctl_mixer_analog_loopback =
- SB_SINGLE("Analog Loopback Switch", SB_ALS4000_MIC_IN_GAIN, 7, 0x01);
-static struct sbmix_elem snd_als4000_ctl_mixer_digital_loopback =
+ },
+ SB_SINGLE("Mono Playback Switch", SB_DT019X_OUTPUT_SW2, 0, 1),
+ SB_SINGLE("Analog Loopback Switch", SB_ALS4000_MIC_IN_GAIN, 7, 0x01),
+ SB_SINGLE("3D Control - Switch", SB_ALS4000_3D_SND_FX, 6, 0x01),
SB_SINGLE("Digital Loopback Switch",
- SB_ALS4000_CR3_CONFIGURATION, 7, 0x01);
-/* FIXME: functionality of 3D controls might be swapped, I didn't find
- * a description of how to identify what is supposed to be what */
-static struct sbmix_elem snd_als4000_3d_control_switch =
- SB_SINGLE("3D Control - Switch", SB_ALS4000_3D_SND_FX, 6, 0x01);
-static struct sbmix_elem snd_als4000_3d_control_ratio =
- SB_SINGLE("3D Control - Level", SB_ALS4000_3D_SND_FX, 0, 0x07);
-static struct sbmix_elem snd_als4000_3d_control_freq =
+ SB_ALS4000_CR3_CONFIGURATION, 7, 0x01),
+ /* FIXME: functionality of 3D controls might be swapped, I didn't find
+ * a description of how to identify what is supposed to be what */
+ SB_SINGLE("3D Control - Level", SB_ALS4000_3D_SND_FX, 0, 0x07),
/* FIXME: maybe there's actually some standard 3D ctrl name for it?? */
- SB_SINGLE("3D Control - Freq", SB_ALS4000_3D_SND_FX, 4, 0x03);
-static struct sbmix_elem snd_als4000_3d_control_delay =
+ SB_SINGLE("3D Control - Freq", SB_ALS4000_3D_SND_FX, 4, 0x03),
/* FIXME: ALS4000a.pdf mentions BBD (Bucket Brigade Device) time delay,
* but what ALSA 3D attribute is that actually? "Center", "Depth",
* "Wide" or "Space" or even "Level"? Assuming "Wide" for now... */
- SB_SINGLE("3D Control - Wide", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f);
-static struct sbmix_elem snd_als4000_3d_control_poweroff_switch =
- SB_SINGLE("3D PowerOff Switch", SB_ALS4000_3D_TIME_DELAY, 4, 0x01);
-static struct sbmix_elem snd_als4000_ctl_3db_freq_control_switch =
+ SB_SINGLE("3D Control - Wide", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f),
+ SB_SINGLE("3D PowerOff Switch", SB_ALS4000_3D_TIME_DELAY, 4, 0x01),
SB_SINGLE("Master Playback 8kHz / 20kHz LPF Switch",
- SB_ALS4000_FMDAC, 5, 0x01);
+ SB_ALS4000_FMDAC, 5, 0x01),
#ifdef NOT_AVAILABLE
-static struct sbmix_elem snd_als4000_ctl_fmdac =
- SB_SINGLE("FMDAC Switch (Option ?)", SB_ALS4000_FMDAC, 0, 0x01);
-static struct sbmix_elem snd_als4000_ctl_qsound =
- SB_SINGLE("QSound Mode", SB_ALS4000_QSOUND, 1, 0x1f);
-#endif
-
-static struct sbmix_elem *snd_als4000_controls[] = {
- /* ALS4000a.PDF regs page */
- &snd_sb16_ctl_master_play_vol, /* MX30/31 12 */
- &snd_dt019x_ctl_pcm_play_switch, /* MX4C 16 */
- &snd_sb16_ctl_pcm_play_vol, /* MX32/33 12 */
- &snd_sb16_ctl_synth_capture_route, /* MX3D/3E 14 */
- &snd_dt019x_ctl_synth_play_switch, /* MX4C 16 */
- &snd_sb16_ctl_synth_play_vol, /* MX34/35 12/13 */
- &snd_sb16_ctl_cd_capture_route, /* MX3D/3E 14 */
- &snd_sb16_ctl_cd_play_switch, /* MX3C 14 */
- &snd_sb16_ctl_cd_play_vol, /* MX36/37 13 */
- &snd_sb16_ctl_line_capture_route, /* MX3D/3E 14 */
- &snd_sb16_ctl_line_play_switch, /* MX3C 14 */
- &snd_sb16_ctl_line_play_vol, /* MX38/39 13 */
- &snd_sb16_ctl_mic_capture_route, /* MX3D/3E 14 */
- &snd_als4000_ctl_mic_20db_boost, /* MX4D 16 */
- &snd_sb16_ctl_mic_play_switch, /* MX3C 14 */
- &snd_sb16_ctl_mic_play_vol, /* MX3A 13 */
- &snd_sb16_ctl_pc_speaker_vol, /* MX3B 14 */
- &snd_sb16_ctl_capture_vol, /* MX3F/40 15 */
- &snd_sb16_ctl_play_vol, /* MX41/42 15 */
- &snd_als4000_ctl_master_mono_playback_switch, /* MX4C 16 */
- &snd_als4k_ctl_master_mono_capture_route, /* MX4B 16 */
- &snd_als4000_ctl_mono_playback_switch, /* MX4C 16 */
- &snd_als4000_ctl_mixer_analog_loopback, /* MX4D 16 */
- &snd_als4000_ctl_mixer_digital_loopback, /* CR3 21 */
- &snd_als4000_3d_control_switch, /* MX50 17 */
- &snd_als4000_3d_control_ratio, /* MX50 17 */
- &snd_als4000_3d_control_freq, /* MX50 17 */
- &snd_als4000_3d_control_delay, /* MX51 18 */
- &snd_als4000_3d_control_poweroff_switch, /* MX51 18 */
- &snd_als4000_ctl_3db_freq_control_switch, /* MX4F 17 */
-#ifdef NOT_AVAILABLE
- &snd_als4000_ctl_fmdac,
- &snd_als4000_ctl_qsound,
+ SB_SINGLE("FMDAC Switch (Option ?)", SB_ALS4000_FMDAC, 0, 0x01),
+ SB_SINGLE("QSound Mode", SB_ALS4000_QSOUND, 1, 0x1f),
#endif
};
@@ -829,11 +720,10 @@
{ SB_ALS4000_MIC_IN_GAIN, 0 },
};
-
/*
*/
static int snd_sbmixer_init(struct snd_sb *chip,
- struct sbmix_elem **controls,
+ struct sbmix_elem *controls,
int controls_count,
unsigned char map[][2],
int map_count,
@@ -856,7 +746,8 @@
}
for (idx = 0; idx < controls_count; idx++) {
- if ((err = snd_sbmixer_add_ctl_elem(chip, controls[idx])) < 0)
+ err = snd_sbmixer_add_ctl_elem(chip, &controls[idx]);
+ if (err < 0)
return err;
}
snd_component_add(card, name);
@@ -888,6 +779,7 @@
return err;
break;
case SB_HW_PRO:
+ case SB_HW_JAZZ16:
if ((err = snd_sbmixer_init(chip,
snd_sbpro_controls,
ARRAY_SIZE(snd_sbpro_controls),
@@ -908,6 +800,15 @@
return err;
break;
case SB_HW_ALS4000:
+ /* use only the first 16 controls from SB16 */
+ err = snd_sbmixer_init(chip,
+ snd_sb16_controls,
+ 16,
+ snd_sb16_init_values,
+ ARRAY_SIZE(snd_sb16_init_values),
+ "ALS4000");
+ if (err < 0)
+ return err;
if ((err = snd_sbmixer_init(chip,
snd_als4000_controls,
ARRAY_SIZE(snd_als4000_controls),
@@ -1029,6 +930,7 @@
save_mixer(chip, sb20_saved_regs, ARRAY_SIZE(sb20_saved_regs));
break;
case SB_HW_PRO:
+ case SB_HW_JAZZ16:
save_mixer(chip, sbpro_saved_regs, ARRAY_SIZE(sbpro_saved_regs));
break;
case SB_HW_16:
@@ -1055,6 +957,7 @@
restore_mixer(chip, sb20_saved_regs, ARRAY_SIZE(sb20_saved_regs));
break;
case SB_HW_PRO:
+ case SB_HW_JAZZ16:
restore_mixer(chip, sbpro_saved_regs, ARRAY_SIZE(sbpro_saved_regs));
break;
case SB_HW_16:
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 5b9d6c1..9191b32 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -2014,6 +2014,7 @@
case WSS_HW_INTERWAVE:
ptexts = gusmax_texts;
break;
+ case WSS_HW_OPTI93X:
case WSS_HW_OPL3SA2:
ptexts = opl3sa_texts;
break;
@@ -2246,54 +2247,12 @@
CS4231_MONO_CTRL, 5, 1, 0),
};
-static struct snd_kcontrol_new snd_opti93x_controls[] = {
-WSS_DOUBLE("Master Playback Switch", 0,
- OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1),
-WSS_DOUBLE_TLV("Master Playback Volume", 0,
- OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1,
- db_scale_6bit),
-WSS_DOUBLE("PCM Playback Switch", 0,
- CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
-WSS_DOUBLE("PCM Playback Volume", 0,
- CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1),
-WSS_DOUBLE("FM Playback Switch", 0,
- CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("FM Playback Volume", 0,
- CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1),
-WSS_DOUBLE("Line Playback Switch", 0,
- CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
-WSS_DOUBLE("Line Playback Volume", 0,
- CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1),
-WSS_DOUBLE("Mic Playback Switch", 0,
- OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Mic Playback Volume", 0,
- OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1),
-WSS_DOUBLE("Mic Boost", 0,
- CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 5, 5, 1, 0),
-WSS_DOUBLE("CD Playback Switch", 0,
- CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("CD Playback Volume", 0,
- CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1),
-WSS_DOUBLE("Aux Playback Switch", 0,
- OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Playback Volume", 0,
- OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1),
-WSS_DOUBLE("Capture Volume", 0,
- CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 0, 0, 15, 0),
-{
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = snd_wss_info_mux,
- .get = snd_wss_get_mux,
- .put = snd_wss_put_mux,
-}
-};
-
int snd_wss_mixer(struct snd_wss *chip)
{
struct snd_card *card;
unsigned int idx;
int err;
+ int count = ARRAY_SIZE(snd_wss_controls);
if (snd_BUG_ON(!chip || !chip->pcm))
return -EINVAL;
@@ -2302,28 +2261,19 @@
strcpy(card->mixername, chip->pcm->name);
- if (chip->hardware == WSS_HW_OPTI93X)
- for (idx = 0; idx < ARRAY_SIZE(snd_opti93x_controls); idx++) {
- err = snd_ctl_add(card,
- snd_ctl_new1(&snd_opti93x_controls[idx],
- chip));
- if (err < 0)
- return err;
- }
- else {
- int count = ARRAY_SIZE(snd_wss_controls);
+ /* Use only the first 11 entries on AD1848 */
+ if (chip->hardware & WSS_HW_AD1848_MASK)
+ count = 11;
+ /* There is no loopback on OPTI93X */
+ else if (chip->hardware == WSS_HW_OPTI93X)
+ count = 9;
- /* Use only the first 11 entries on AD1848 */
- if (chip->hardware & WSS_HW_AD1848_MASK)
- count = 11;
-
- for (idx = 0; idx < count; idx++) {
- err = snd_ctl_add(card,
- snd_ctl_new1(&snd_wss_controls[idx],
- chip));
- if (err < 0)
- return err;
- }
+ for (idx = 0; idx < count; idx++) {
+ err = snd_ctl_add(card,
+ snd_ctl_new1(&snd_wss_controls[idx],
+ chip));
+ if (err < 0)
+ return err;
}
return 0;
}
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index f1d9d16..6aff217 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -26,7 +26,6 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/gfp.h>
-#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
@@ -603,25 +602,14 @@
static int snd_sgio2audio_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- int size = params_buffer_bytes(hw_params);
-
- /* alloc virtual 'dma' area */
- if (runtime->dma_area)
- vfree(runtime->dma_area);
- runtime->dma_area = vmalloc_user(size);
- if (runtime->dma_area == NULL)
- return -ENOMEM;
- runtime->dma_bytes = size;
- return 0;
+ return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
}
/* hw_free callback */
static int snd_sgio2audio_pcm_hw_free(struct snd_pcm_substream *substream)
{
- vfree(substream->runtime->dma_area);
- substream->runtime->dma_area = NULL;
- return 0;
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
}
/* prepare callback */
@@ -692,13 +680,6 @@
chip->channel[chan->idx].pos);
}
-/* get the physical page pointer on the given offset */
-static struct page *snd_sgio2audio_page(struct snd_pcm_substream *substream,
- unsigned long offset)
-{
- return vmalloc_to_page(substream->runtime->dma_area + offset);
-}
-
/* operators */
static struct snd_pcm_ops snd_sgio2audio_playback1_ops = {
.open = snd_sgio2audio_playback1_open,
@@ -709,7 +690,8 @@
.prepare = snd_sgio2audio_pcm_prepare,
.trigger = snd_sgio2audio_pcm_trigger,
.pointer = snd_sgio2audio_pcm_pointer,
- .page = snd_sgio2audio_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
static struct snd_pcm_ops snd_sgio2audio_playback2_ops = {
@@ -721,7 +703,8 @@
.prepare = snd_sgio2audio_pcm_prepare,
.trigger = snd_sgio2audio_pcm_trigger,
.pointer = snd_sgio2audio_pcm_pointer,
- .page = snd_sgio2audio_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
static struct snd_pcm_ops snd_sgio2audio_capture_ops = {
@@ -733,7 +716,8 @@
.prepare = snd_sgio2audio_pcm_prepare,
.trigger = snd_sgio2audio_pcm_trigger,
.pointer = snd_sgio2audio_pcm_pointer,
- .page = snd_sgio2audio_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
/*
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index 89466b0..24d152c 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -198,7 +198,7 @@
* 5530 only. The 5510/5520 decode is different.
*/
-static struct pci_device_id id_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(id_tbl) = {
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
{ }
};
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index c625309..fde7c12 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -328,11 +328,11 @@
return mixer_devs[mixdev]->ioctl(mixdev, cmd, arg);
}
-static int sound_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long sound_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int len = 0, dtype;
- int dev = iminor(inode);
+ int dev = iminor(file->f_dentry->d_inode);
+ long ret = -EINVAL;
void __user *p = (void __user *)arg;
if (_SIOC_DIR(cmd) != _SIOC_NONE && _SIOC_DIR(cmd) != 0) {
@@ -353,6 +353,7 @@
if (cmd == OSS_GETVERSION)
return __put_user(SOUND_VERSION, (int __user *)p);
+ lock_kernel();
if (_IOC_TYPE(cmd) == 'M' && num_mixers > 0 && /* Mixer ioctl */
(dev & 0x0f) != SND_DEV_CTL) {
dtype = dev & 0x0f;
@@ -360,24 +361,31 @@
case SND_DEV_DSP:
case SND_DEV_DSP16:
case SND_DEV_AUDIO:
- return sound_mixer_ioctl(audio_devs[dev >> 4]->mixer_dev,
+ ret = sound_mixer_ioctl(audio_devs[dev >> 4]->mixer_dev,
cmd, p);
-
+ break;
default:
- return sound_mixer_ioctl(dev >> 4, cmd, p);
+ ret = sound_mixer_ioctl(dev >> 4, cmd, p);
+ break;
}
+ unlock_kernel();
+ return ret;
}
+
switch (dev & 0x0f) {
case SND_DEV_CTL:
if (cmd == SOUND_MIXER_GETLEVELS)
- return get_mixer_levels(p);
- if (cmd == SOUND_MIXER_SETLEVELS)
- return set_mixer_levels(p);
- return sound_mixer_ioctl(dev >> 4, cmd, p);
+ ret = get_mixer_levels(p);
+ else if (cmd == SOUND_MIXER_SETLEVELS)
+ ret = set_mixer_levels(p);
+ else
+ ret = sound_mixer_ioctl(dev >> 4, cmd, p);
+ break;
case SND_DEV_SEQ:
case SND_DEV_SEQ2:
- return sequencer_ioctl(dev, file, cmd, p);
+ ret = sequencer_ioctl(dev, file, cmd, p);
+ break;
case SND_DEV_DSP:
case SND_DEV_DSP16:
@@ -390,7 +398,8 @@
break;
}
- return -EINVAL;
+ unlock_kernel();
+ return ret;
}
static unsigned int sound_poll(struct file *file, poll_table * wait)
@@ -490,7 +499,7 @@
.read = sound_read,
.write = sound_write,
.poll = sound_poll,
- .ioctl = sound_ioctl,
+ .unlocked_ioctl = sound_ioctl,
.mmap = sound_mmap,
.open = sound_open,
.release = sound_release,
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 351654c..1298c68 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -789,6 +789,7 @@
Say Y here to include support for sound cards based on the
Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
Essence ST (Deluxe), and Essence STX.
+ Support for the DS is experimental.
Support for the HDAV1.3 (Deluxe) is very experimental.
To compile this driver as a module, choose M here: the module
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index d9266ba..1caf5e3 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -544,25 +544,10 @@
return 0;
}
-static int patch_wolfson_wm9705_specific(struct snd_ac97 * ac97)
-{
- int err, i;
- for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) {
- if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0)
- return err;
- }
- snd_ac97_write_cache(ac97, 0x72, 0x0808);
- return 0;
-}
-
-static struct snd_ac97_build_ops patch_wolfson_wm9705_ops = {
- .build_specific = patch_wolfson_wm9705_specific,
-};
-
static int patch_wolfson05(struct snd_ac97 * ac97)
{
/* WM9705, WM9710 */
- ac97->build_ops = &patch_wolfson_wm9705_ops;
+ ac97->build_ops = &patch_wolfson_wm9703_ops;
#ifdef CONFIG_TOUCHSCREEN_WM9705
/* WM9705 touchscreen uses AUX and VIDEO for touch */
ac97->flags |= AC97_HAS_NO_VIDEO | AC97_HAS_NO_AUX;
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index 8f5098f..4382d0f 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -1048,7 +1048,7 @@
pci_set_drvdata(pci, NULL);
}
-static struct pci_device_id snd_ad1889_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_ad1889_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_ANALOG_DEVICES, PCI_DEVICE_ID_AD1889JS) },
{ 0, },
};
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index aaf4da6..5c6e322 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -275,7 +275,7 @@
#endif
};
-static struct pci_device_id snd_ali_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_ali_ids) = {
{PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
{0, }
};
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 3aa35af..d7653cb 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -145,7 +145,7 @@
int block_counter_register;
};
-static struct pci_device_id snd_als300_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_als300_ids) = {
{ 0x4005, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300 },
{ 0x4005, 0x0308, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300_PLUS },
{ 0, }
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 3dbacde..d75cf7b 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -117,7 +117,7 @@
#endif
};
-static struct pci_device_id snd_als4000_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_als4000_ids) = {
{ 0x4005, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ALS4000 */
{ 0, }
};
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 42b4fbb..49d572a 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -286,7 +286,7 @@
/*
*/
-static struct pci_device_id snd_atiixp_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_atiixp_ids) = {
{ PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */
{ PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */
{ PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index e7e147b..91d7036 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -261,7 +261,7 @@
/*
*/
-static struct pci_device_id snd_atiixp_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_atiixp_ids) = {
{ PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */
{ PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */
{ 0, }
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index c0e8c6b..aa51cc7 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,6 +1,6 @@
#include "au8810.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_vortex_ids) = {
{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,},
{0,}
};
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index a652733..2f321e7 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,6 +1,6 @@
#include "au8820.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_vortex_ids) = {
{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,},
{0,}
};
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index 6c702ad..279b78f 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,6 +1,6 @@
#include "au8830.h"
#include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_vortex_ids) = {
{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,},
{0,}
};
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index 4d34bb0..67921f9 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -164,7 +164,7 @@
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
-static struct pci_device_id snd_aw2_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_aw2_ids) = {
{PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
0, 0, 0},
{0}
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 69867ac..4679ed8 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -350,7 +350,7 @@
#endif
};
-static const struct pci_device_id snd_azf3328_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_azf3328_ids) = {
{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* PCI168/3328 */
{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* 3328 */
{ 0, }
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 4e2b925..37e1b5d 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -795,7 +795,7 @@
.driver_data = SND_BT87X_BOARD_ ## id }
/* driver_data is the card id for that device */
-static struct pci_device_id snd_bt87x_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_bt87x_ids) = {
/* Hauppauge WinTV series */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, GENERIC),
/* Hauppauge WinTV series */
@@ -964,7 +964,7 @@
/* default entries for all Bt87x cards - it's not exported */
/* driver_data is set to 0 to call detection */
-static struct pci_device_id snd_bt87x_default_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(snd_bt87x_default_ids) = {
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, PCI_ANY_ID, PCI_ANY_ID, UNKNOWN),
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, PCI_ANY_ID, PCI_ANY_ID, UNKNOWN),
{ }
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 15e4138..0a3d3d6 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1875,7 +1875,7 @@
#endif
// PCI IDs
-static struct pci_device_id snd_ca0106_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_ca0106_ids) = {
{ PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */
{ 0, }
};
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index a312bae..1ded64e 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2796,7 +2796,7 @@
#endif
-static struct pci_device_id snd_cmipci_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_cmipci_ids) = {
{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0},
{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0},
{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
@@ -3018,7 +3018,7 @@
int integrated_midi = 0;
char modelstr[16];
int pcm_index, pcm_spdif_index;
- static struct pci_device_id intel_82437vx[] = {
+ static DEFINE_PCI_DEVICE_TABLE(intel_82437vx) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX) },
{ },
};
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index e2e0359..9edc650 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -494,7 +494,7 @@
static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id);
-static struct pci_device_id snd_cs4281_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_cs4281_ids) = {
{ PCI_VDEVICE(CIRRUS, 0x6005), 0, }, /* CS4281 */
{ 0, }
};
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index 033aec4..767fa7f 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -64,7 +64,7 @@
module_param_array(mmap_valid, bool, NULL, 0444);
MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
-static struct pci_device_id snd_cs46xx_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_cs46xx_ids) = {
{ PCI_VDEVICE(CIRRUS, 0x6001), 0, }, /* CS4280 */
{ PCI_VDEVICE(CIRRUS, 0x6003), 0, }, /* CS4612 */
{ PCI_VDEVICE(CIRRUS, 0x6004), 0, }, /* CS4615 */
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 1be96ea..3f99a5e 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -2238,11 +2238,11 @@
/* set the desired CODEC mode */
if (ac97->num == CS46XX_PRIMARY_CODEC_INDEX) {
- snd_printdd("cs46xx: CODOEC1 mode %04x\n",0x0);
- snd_cs46xx_ac97_write(ac97,AC97_CSR_ACMODE,0x0);
+ snd_printdd("cs46xx: CODEC1 mode %04x\n", 0x0);
+ snd_cs46xx_ac97_write(ac97, AC97_CSR_ACMODE, 0x0);
} else if (ac97->num == CS46XX_SECONDARY_CODEC_INDEX) {
- snd_printdd("cs46xx: CODOEC2 mode %04x\n",0x3);
- snd_cs46xx_ac97_write(ac97,AC97_CSR_ACMODE,0x3);
+ snd_printdd("cs46xx: CODEC2 mode %04x\n", 0x3);
+ snd_cs46xx_ac97_write(ac97, AC97_CSR_ACMODE, 0x3);
} else {
snd_BUG(); /* should never happen ... */
}
@@ -2266,7 +2266,7 @@
return;
/* test if we can write to the record gain volume register */
- snd_ac97_write_cache(ac97, AC97_REC_GAIN, 0x8a05);
+ snd_ac97_write(ac97, AC97_REC_GAIN, 0x8a05);
if ((err = snd_ac97_read(ac97, AC97_REC_GAIN)) == 0x8a05)
return;
@@ -3597,7 +3597,7 @@
#ifdef CONFIG_PM
static unsigned int saved_regs[] = {
BA0_ACOSV,
- BA0_ASER_FADDR,
+ /*BA0_ASER_FADDR,*/
BA0_ASER_MASTER,
BA1_PVOL,
BA1_CVOL,
@@ -3644,6 +3644,7 @@
#ifdef CONFIG_SND_CS46XX_NEW_DSP
int i;
#endif
+ unsigned int tmp;
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
@@ -3685,6 +3686,15 @@
snd_ac97_resume(chip->ac97[CS46XX_PRIMARY_CODEC_INDEX]);
snd_ac97_resume(chip->ac97[CS46XX_SECONDARY_CODEC_INDEX]);
+ /*
+ * Stop capture DMA.
+ */
+ tmp = snd_cs46xx_peek(chip, BA1_CCTL);
+ chip->capt.ctl = tmp & 0x0000ffff;
+ snd_cs46xx_poke(chip, BA1_CCTL, tmp & 0xffff0000);
+
+ mdelay(5);
+
/* reset playback/capture */
snd_cs46xx_set_play_sample_rate(chip, 8000);
snd_cs46xx_set_capture_sample_rate(chip, 8000);
diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c
index f4f0c8f..3e5ca8f 100644
--- a/sound/pci/cs46xx/dsp_spos.c
+++ b/sound/pci/cs46xx/dsp_spos.c
@@ -298,6 +298,9 @@
if (ins->scbs[i].deleted) continue;
cs46xx_dsp_proc_free_scb_desc ( (ins->scbs + i) );
+#ifdef CONFIG_PM
+ kfree(ins->scbs[i].data);
+#endif
}
kfree(ins->code.data);
@@ -974,13 +977,11 @@
index = find_free_scb_index (ins);
+ memset(&ins->scbs[index], 0, sizeof(ins->scbs[index]));
strcpy(ins->scbs[index].scb_name, name);
ins->scbs[index].address = dest;
ins->scbs[index].index = index;
- ins->scbs[index].proc_info = NULL;
ins->scbs[index].ref_count = 1;
- ins->scbs[index].deleted = 0;
- spin_lock_init(&ins->scbs[index].lock);
desc = (ins->scbs + index);
ins->scbs[index].scb_symbol = add_symbol (chip, name, dest, SYMBOL_PARAMETER);
@@ -1022,17 +1023,29 @@
return desc;
}
+#define SCB_BYTES (0x10 * 4)
+
struct dsp_scb_descriptor *
cs46xx_dsp_create_scb (struct snd_cs46xx *chip, char * name, u32 * scb_data, u32 dest)
{
struct dsp_scb_descriptor * desc;
+#ifdef CONFIG_PM
+ /* copy the data for resume */
+ scb_data = kmemdup(scb_data, SCB_BYTES, GFP_KERNEL);
+ if (!scb_data)
+ return NULL;
+#endif
+
desc = _map_scb (chip,name,dest);
if (desc) {
desc->data = scb_data;
_dsp_create_scb(chip,scb_data,dest);
} else {
snd_printk(KERN_ERR "dsp_spos: failed to map SCB\n");
+#ifdef CONFIG_PM
+ kfree(scb_data);
+#endif
}
return desc;
@@ -1988,7 +2001,28 @@
continue;
_dsp_create_scb(chip, s->data, s->address);
}
-
+ for (i = 0; i < ins->nscb; i++) {
+ struct dsp_scb_descriptor *s = &ins->scbs[i];
+ if (s->deleted)
+ continue;
+ if (s->updated)
+ cs46xx_dsp_spos_update_scb(chip, s);
+ if (s->volume_set)
+ cs46xx_dsp_scb_set_volume(chip, s,
+ s->volume[0], s->volume[1]);
+ }
+ if (ins->spdif_status_out & DSP_SPDIF_STATUS_HW_ENABLED) {
+ cs46xx_dsp_enable_spdif_hw(chip);
+ snd_cs46xx_poke(chip, (ins->ref_snoop_scb->address + 2) << 2,
+ (OUTPUT_SNOOP_BUFFER + 0x10) << 0x10);
+ if (ins->spdif_status_out & DSP_SPDIF_STATUS_PLAYBACK_OPEN)
+ cs46xx_poke_via_dsp(chip, SP_SPDOUT_CSUV,
+ ins->spdif_csuv_stream);
+ }
+ if (chip->dsp_spos_instance->spdif_status_in) {
+ cs46xx_poke_via_dsp(chip, SP_ASER_COUNTDOWN, 0x80000005);
+ cs46xx_poke_via_dsp(chip, SP_SPDIN_CONTROL, 0x800003ff);
+ }
return 0;
}
#endif
diff --git a/sound/pci/cs46xx/dsp_spos.h b/sound/pci/cs46xx/dsp_spos.h
index f9e169d..ca47a81 100644
--- a/sound/pci/cs46xx/dsp_spos.h
+++ b/sound/pci/cs46xx/dsp_spos.h
@@ -212,6 +212,7 @@
(scb->address + SCBsubListPtr) << 2,
(scb->sub_list_ptr->address << 0x10) |
(scb->next_scb_ptr->address));
+ scb->updated = 1;
}
static inline void cs46xx_dsp_scb_set_volume (struct snd_cs46xx * chip,
@@ -222,6 +223,9 @@
snd_cs46xx_poke(chip, (scb->address + SCBVolumeCtrl) << 2, val);
snd_cs46xx_poke(chip, (scb->address + SCBVolumeCtrl + 1) << 2, val);
+ scb->volume_set = 1;
+ scb->volume[0] = left;
+ scb->volume[1] = right;
}
#endif /* __DSP_SPOS_H__ */
#endif /* CONFIG_SND_CS46XX_NEW_DSP */
diff --git a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c
index dd7c41b..00b148a 100644
--- a/sound/pci/cs46xx/dsp_spos_scb_lib.c
+++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c
@@ -115,7 +115,6 @@
static void _dsp_unlink_scb (struct snd_cs46xx *chip, struct dsp_scb_descriptor * scb)
{
struct dsp_spos_instance * ins = chip->dsp_spos_instance;
- unsigned long flags;
if ( scb->parent_scb_ptr ) {
/* unlink parent SCB */
@@ -153,8 +152,6 @@
scb->next_scb_ptr = ins->the_null_scb;
}
- spin_lock_irqsave(&chip->reg_lock, flags);
-
/* update parent first entry in DSP RAM */
cs46xx_dsp_spos_update_scb(chip,scb->parent_scb_ptr);
@@ -162,7 +159,6 @@
cs46xx_dsp_spos_update_scb(chip,scb);
scb->parent_scb_ptr = NULL;
- spin_unlock_irqrestore(&chip->reg_lock, flags);
}
}
@@ -197,9 +193,9 @@
goto _end;
#endif
- spin_lock_irqsave(&scb->lock, flags);
+ spin_lock_irqsave(&chip->reg_lock, flags);
_dsp_unlink_scb (chip,scb);
- spin_unlock_irqrestore(&scb->lock, flags);
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
cs46xx_dsp_proc_free_scb_desc(scb);
if (snd_BUG_ON(!scb->scb_symbol))
@@ -207,6 +203,10 @@
remove_symbol (chip,scb->scb_symbol);
ins->scbs[scb->index].deleted = 1;
+#ifdef CONFIG_PM
+ kfree(ins->scbs[scb->index].data);
+ ins->scbs[scb->index].data = NULL;
+#endif
if (scb->index < ins->scb_highest_frag_index)
ins->scb_highest_frag_index = scb->index;
@@ -1508,20 +1508,17 @@
chip->dsp_spos_instance->npcm_channels <= 0))
return -EIO;
- spin_lock(&pcm_channel->src_scb->lock);
-
+ spin_lock_irqsave(&chip->reg_lock, flags);
if (pcm_channel->unlinked) {
- spin_unlock(&pcm_channel->src_scb->lock);
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
return -EIO;
}
- spin_lock_irqsave(&chip->reg_lock, flags);
pcm_channel->unlinked = 1;
- spin_unlock_irqrestore(&chip->reg_lock, flags);
_dsp_unlink_scb (chip,pcm_channel->pcm_reader_scb);
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
- spin_unlock(&pcm_channel->src_scb->lock);
return 0;
}
@@ -1533,10 +1530,10 @@
struct dsp_scb_descriptor * src_scb = pcm_channel->src_scb;
unsigned long flags;
- spin_lock(&pcm_channel->src_scb->lock);
+ spin_lock_irqsave(&chip->reg_lock, flags);
if (pcm_channel->unlinked == 0) {
- spin_unlock(&pcm_channel->src_scb->lock);
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
return -EIO;
}
@@ -1552,8 +1549,6 @@
snd_BUG_ON(pcm_channel->pcm_reader_scb->parent_scb_ptr);
pcm_channel->pcm_reader_scb->parent_scb_ptr = parent_scb;
- spin_lock_irqsave(&chip->reg_lock, flags);
-
/* update SCB entry in DSP RAM */
cs46xx_dsp_spos_update_scb(chip,pcm_channel->pcm_reader_scb);
@@ -1562,8 +1557,6 @@
pcm_channel->unlinked = 0;
spin_unlock_irqrestore(&chip->reg_lock, flags);
-
- spin_unlock(&pcm_channel->src_scb->lock);
return 0;
}
@@ -1596,13 +1589,17 @@
int cs46xx_src_unlink(struct snd_cs46xx *chip, struct dsp_scb_descriptor * src)
{
+ unsigned long flags;
+
if (snd_BUG_ON(!src->parent_scb_ptr))
return -EINVAL;
/* mute SCB */
cs46xx_dsp_scb_set_volume (chip,src,0,0);
+ spin_lock_irqsave(&chip->reg_lock, flags);
_dsp_unlink_scb (chip,src);
+ spin_unlock_irqrestore(&chip->reg_lock, flags);
return 0;
}
diff --git a/sound/pci/cs5530.c b/sound/pci/cs5530.c
index dc46432..207479a 100644
--- a/sound/pci/cs5530.c
+++ b/sound/pci/cs5530.c
@@ -58,7 +58,7 @@
unsigned long pci_base;
};
-static struct pci_device_id snd_cs5530_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_cs5530_ids) = {
{PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID,
PCI_ANY_ID, 0, 0},
{0,}
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 91e7faf..afb8037 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -66,7 +66,7 @@
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " DRIVER_NAME);
-static struct pci_device_id snd_cs5535audio_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_cs5535audio_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO) },
{}
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index 459c1f6..480cb1e 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -1214,10 +1214,11 @@
return ct_atc_destroy(atc);
}
-static int __devinit atc_identify_card(struct ct_atc *atc)
+static int __devinit atc_identify_card(struct ct_atc *atc, unsigned int ssid)
{
const struct snd_pci_quirk *p;
const struct snd_pci_quirk *list;
+ u16 vendor_id, device_id;
switch (atc->chip_type) {
case ATC20K1:
@@ -1231,13 +1232,19 @@
default:
return -ENOENT;
}
- p = snd_pci_quirk_lookup(atc->pci, list);
+ if (ssid) {
+ vendor_id = ssid >> 16;
+ device_id = ssid & 0xffff;
+ } else {
+ vendor_id = atc->pci->subsystem_vendor;
+ device_id = atc->pci->subsystem_device;
+ }
+ p = snd_pci_quirk_lookup_id(vendor_id, device_id, list);
if (p) {
if (p->value < 0) {
printk(KERN_ERR "ctxfi: "
"Device %04x:%04x is black-listed\n",
- atc->pci->subsystem_vendor,
- atc->pci->subsystem_device);
+ vendor_id, device_id);
return -ENOENT;
}
atc->model = p->value;
@@ -1250,8 +1257,7 @@
atc->model_name = ct_subsys_name[atc->model];
snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
atc->chip_name, atc->model_name,
- atc->pci->subsystem_vendor,
- atc->pci->subsystem_device);
+ vendor_id, device_id);
return 0;
}
@@ -1625,7 +1631,8 @@
int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
unsigned int rsr, unsigned int msr,
- int chip_type, struct ct_atc **ratc)
+ int chip_type, unsigned int ssid,
+ struct ct_atc **ratc)
{
struct ct_atc *atc;
static struct snd_device_ops ops = {
@@ -1651,7 +1658,7 @@
mutex_init(&atc->atc_mutex);
/* Find card model */
- err = atc_identify_card(atc);
+ err = atc_identify_card(atc, ssid);
if (err < 0) {
printk(KERN_ERR "ctatc: Card not recognised\n");
goto error1;
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
index 9fd8a57..7167c01 100644
--- a/sound/pci/ctxfi/ctatc.h
+++ b/sound/pci/ctxfi/ctatc.h
@@ -148,7 +148,7 @@
int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
unsigned int rsr, unsigned int msr, int chip_type,
- struct ct_atc **ratc);
+ unsigned int subsysid, struct ct_atc **ratc);
int __devinit ct_atc_create_alsa_devs(struct ct_atc *atc);
#endif /* CTATC_H */
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
index 7654174..f42e7e1 100644
--- a/sound/pci/ctxfi/xfi.c
+++ b/sound/pci/ctxfi/xfi.c
@@ -32,6 +32,7 @@
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static unsigned int subsystem[SNDRV_CARDS];
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Creative X-Fi driver");
@@ -39,8 +40,10 @@
MODULE_PARM_DESC(id, "ID string for Creative X-Fi driver");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Creative X-Fi driver");
+module_param_array(subsystem, int, NULL, 0444);
+MODULE_PARM_DESC(subsystem, "Override subsystem ID for Creative X-Fi driver");
-static struct pci_device_id ct_pci_dev_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(ct_pci_dev_ids) = {
/* only X-Fi is supported, so... */
{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K1),
.driver_data = ATC20K1,
@@ -85,7 +88,7 @@
multiple = 2;
}
err = ct_atc_create(card, pci, reference_rate, multiple,
- pci_id->driver_data, &atc);
+ pci_id->driver_data, subsystem[dev], &atc);
if (err < 0)
goto error;
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
index 8c6db3a..a65bafe 100644
--- a/sound/pci/echoaudio/darla20.c
+++ b/sound/pci/echoaudio/darla20.c
@@ -63,7 +63,7 @@
{0, "darla20_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0010, 0, 0, 0}, /* DSP 56301 Darla20 rev.0 */
{0,}
};
diff --git a/sound/pci/echoaudio/darla20_dsp.c b/sound/pci/echoaudio/darla20_dsp.c
index 2904330..20c7cbc 100644
--- a/sound/pci/echoaudio/darla20_dsp.c
+++ b/sound/pci/echoaudio/darla20_dsp.c
@@ -45,7 +45,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_DARLA20_DSP];
+ chip->dsp_code_to_load = FW_DARLA20_DSP;
chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
chip->clock_state = GD_CLOCK_UNDEF;
/* Since this card has no ASIC, mark it as loaded so everything
@@ -57,15 +57,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
/* The Darla20 has no external clock sources */
static u32 detect_input_clocks(const struct echoaudio *chip)
{
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
index 04cbf3e..0a6c50b 100644
--- a/sound/pci/echoaudio/darla24.c
+++ b/sound/pci/echoaudio/darla24.c
@@ -67,7 +67,7 @@
{0, "darla24_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0}, /* DSP 56301 Darla24 rev.0 */
{0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0}, /* DSP 56301 Darla24 rev.1 */
{0,}
diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
index 6022873..6da6663 100644
--- a/sound/pci/echoaudio/darla24_dsp.c
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -45,7 +45,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_DARLA24_DSP];
+ chip->dsp_code_to_load = FW_DARLA24_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -56,15 +56,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
index 4022e43..f514279 100644
--- a/sound/pci/echoaudio/echo3g.c
+++ b/sound/pci/echoaudio/echo3g.c
@@ -81,7 +81,7 @@
{0, "3g_asic.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x0100, 0, 0, 0}, /* Echo 3G */
{0,}
};
diff --git a/sound/pci/echoaudio/echo3g_dsp.c b/sound/pci/echoaudio/echo3g_dsp.c
index 57967e5..3cdc2ee 100644
--- a/sound/pci/echoaudio/echo3g_dsp.c
+++ b/sound/pci/echoaudio/echo3g_dsp.c
@@ -61,7 +61,7 @@
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
chip->has_midi = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_ECHO3G_DSP];
+ chip->dsp_code_to_load = FW_ECHO3G_DSP;
/* Load the DSP code and the ASIC on the PCI card and get
what type of external box is attached */
@@ -97,20 +97,6 @@
chip->digital_modes = ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
- chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
- chip->professional_spdif = FALSE;
- chip->non_audio_spdif = FALSE;
- chip->bad_board = FALSE;
-
- if ((err = init_line_levels(chip)) < 0)
- return err;
- err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
- if (err < 0)
- return err;
- err = set_phantom_power(chip, 0);
- if (err < 0)
- return err;
- err = set_professional_spdif(chip, TRUE);
DE_INIT(("init_hw done\n"));
return err;
@@ -118,6 +104,18 @@
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->non_audio_spdif = FALSE;
+ chip->bad_board = FALSE;
+ chip->phantom_power = FALSE;
+ return init_line_levels(chip);
+}
+
+
+
static int set_phantom_power(struct echoaudio *chip, char on)
{
u32 control_reg = le32_to_cpu(chip->comm_page->control_register);
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index 1305f7c..8dab82d 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -36,22 +36,61 @@
static unsigned int channels_list[10] = {1, 2, 4, 6, 8, 10, 12, 14, 16, 999999};
static const DECLARE_TLV_DB_SCALE(db_scale_output_gain, -12800, 100, 1);
+
+
static int get_firmware(const struct firmware **fw_entry,
- const struct firmware *frm, struct echoaudio *chip)
+ struct echoaudio *chip, const short fw_index)
{
int err;
char name[30];
- DE_ACT(("firmware requested: %s\n", frm->data));
- snprintf(name, sizeof(name), "ea/%s", frm->data);
- if ((err = request_firmware(fw_entry, name, pci_device(chip))) < 0)
+
+#ifdef CONFIG_PM
+ if (chip->fw_cache[fw_index]) {
+ DE_ACT(("firmware requested: %s is cached\n", card_fw[fw_index].data));
+ *fw_entry = chip->fw_cache[fw_index];
+ return 0;
+ }
+#endif
+
+ DE_ACT(("firmware requested: %s\n", card_fw[fw_index].data));
+ snprintf(name, sizeof(name), "ea/%s", card_fw[fw_index].data);
+ err = request_firmware(fw_entry, name, pci_device(chip));
+ if (err < 0)
snd_printk(KERN_ERR "get_firmware(): Firmware not available (%d)\n", err);
+#ifdef CONFIG_PM
+ else
+ chip->fw_cache[fw_index] = *fw_entry;
+#endif
return err;
}
+
+
static void free_firmware(const struct firmware *fw_entry)
{
+#ifdef CONFIG_PM
+ DE_ACT(("firmware not released (kept in cache)\n"));
+#else
release_firmware(fw_entry);
DE_ACT(("firmware released\n"));
+#endif
+}
+
+
+
+static void free_firmware_cache(struct echoaudio *chip)
+{
+#ifdef CONFIG_PM
+ int i;
+
+ for (i = 0; i < 8 ; i++)
+ if (chip->fw_cache[i]) {
+ release_firmware(chip->fw_cache[i]);
+ DE_ACT(("release_firmware(%d)\n", i));
+ }
+
+ DE_ACT(("firmware_cache released\n"));
+#endif
}
@@ -714,6 +753,8 @@
spin_lock(&chip->lock);
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_RESUME:
+ DE_ACT(("pcm_trigger resume\n"));
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
DE_ACT(("pcm_trigger start\n"));
@@ -737,6 +778,8 @@
err = start_transport(chip, channelmask,
chip->pipe_cyclic_mask);
break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ DE_ACT(("pcm_trigger suspend\n"));
case SNDRV_PCM_TRIGGER_STOP:
DE_ACT(("pcm_trigger stop\n"));
for (i = 0; i < DSP_MAXPIPES; i++) {
@@ -1821,7 +1864,9 @@
/* The hardware doesn't tell us which substream caused the irq,
thus we have to check all running substreams. */
for (ss = 0; ss < DSP_MAXPIPES; ss++) {
- if ((substream = chip->substream[ss])) {
+ substream = chip->substream[ss];
+ if (substream && ((struct audiopipe *)substream->runtime->
+ private_data)->state == PIPE_STATE_STARTED) {
period = pcm_pointer(substream) /
substream->runtime->period_size;
if (period != chip->last_period[ss]) {
@@ -1874,6 +1919,7 @@
pci_disable_device(chip->pci);
/* release chip data */
+ free_firmware_cache(chip);
kfree(chip);
DE_INIT(("Chip freed.\n"));
return 0;
@@ -1911,18 +1957,27 @@
return err;
pci_set_master(pci);
- /* allocate a chip-specific data */
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip) {
- pci_disable_device(pci);
- return -ENOMEM;
+ /* Allocate chip if needed */
+ if (!*rchip) {
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ pci_disable_device(pci);
+ return -ENOMEM;
+ }
+ DE_INIT(("chip=%p\n", chip));
+ spin_lock_init(&chip->lock);
+ chip->card = card;
+ chip->pci = pci;
+ chip->irq = -1;
+ atomic_set(&chip->opencount, 0);
+ mutex_init(&chip->mode_mutex);
+ chip->can_set_rate = 1;
+ } else {
+ /* If this was called from the resume function, chip is
+ * already allocated and it contains current card settings.
+ */
+ chip = *rchip;
}
- DE_INIT(("chip=%p\n", chip));
-
- spin_lock_init(&chip->lock);
- chip->card = card;
- chip->pci = pci;
- chip->irq = -1;
/* PCI resource allocation */
chip->dsp_registers_phys = pci_resource_start(pci, 0);
@@ -1962,7 +2017,9 @@
chip->comm_page = (struct comm_page *)chip->commpage_dma_buf.area;
err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
- if (err) {
+ if (err >= 0)
+ err = set_mixer_defaults(chip);
+ if (err < 0) {
DE_INIT(("init_hw err=%d\n", err));
snd_echo_free(chip);
return err;
@@ -1973,9 +2030,6 @@
snd_echo_free(chip);
return err;
}
- atomic_set(&chip->opencount, 0);
- mutex_init(&chip->mode_mutex);
- chip->can_set_rate = 1;
*rchip = chip;
/* Init done ! */
return 0;
@@ -2008,6 +2062,7 @@
snd_card_set_dev(card, &pci->dev);
+ chip = NULL; /* Tells snd_echo_create to allocate chip */
if ((err = snd_echo_create(card, pci, &chip)) < 0) {
snd_card_free(card);
return err;
@@ -2147,6 +2202,112 @@
+#if defined(CONFIG_PM)
+
+static int snd_echo_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ struct echoaudio *chip = pci_get_drvdata(pci);
+
+ DE_INIT(("suspend start\n"));
+ snd_pcm_suspend_all(chip->analog_pcm);
+ snd_pcm_suspend_all(chip->digital_pcm);
+
+#ifdef ECHOCARD_HAS_MIDI
+ /* This call can sleep */
+ if (chip->midi_out)
+ snd_echo_midi_output_trigger(chip->midi_out, 0);
+#endif
+ spin_lock_irq(&chip->lock);
+ if (wait_handshake(chip)) {
+ spin_unlock_irq(&chip->lock);
+ return -EIO;
+ }
+ clear_handshake(chip);
+ if (send_vector(chip, DSP_VC_GO_COMATOSE) < 0) {
+ spin_unlock_irq(&chip->lock);
+ return -EIO;
+ }
+ spin_unlock_irq(&chip->lock);
+
+ chip->dsp_code = NULL;
+ free_irq(chip->irq, chip);
+ chip->irq = -1;
+ pci_save_state(pci);
+ pci_disable_device(pci);
+
+ DE_INIT(("suspend done\n"));
+ return 0;
+}
+
+
+
+static int snd_echo_resume(struct pci_dev *pci)
+{
+ struct echoaudio *chip = pci_get_drvdata(pci);
+ struct comm_page *commpage, *commpage_bak;
+ u32 pipe_alloc_mask;
+ int err;
+
+ DE_INIT(("resume start\n"));
+ pci_restore_state(pci);
+ commpage_bak = kmalloc(sizeof(struct echoaudio), GFP_KERNEL);
+ commpage = chip->comm_page;
+ memcpy(commpage_bak, commpage, sizeof(struct comm_page));
+
+ err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
+ if (err < 0) {
+ kfree(commpage_bak);
+ DE_INIT(("resume init_hw err=%d\n", err));
+ snd_echo_free(chip);
+ return err;
+ }
+ DE_INIT(("resume init OK\n"));
+
+ /* Temporarily set chip->pipe_alloc_mask=0 otherwise
+ * restore_dsp_settings() fails.
+ */
+ pipe_alloc_mask = chip->pipe_alloc_mask;
+ chip->pipe_alloc_mask = 0;
+ err = restore_dsp_rettings(chip);
+ chip->pipe_alloc_mask = pipe_alloc_mask;
+ if (err < 0) {
+ kfree(commpage_bak);
+ return err;
+ }
+ DE_INIT(("resume restore OK\n"));
+
+ memcpy(&commpage->audio_format, &commpage_bak->audio_format,
+ sizeof(commpage->audio_format));
+ memcpy(&commpage->sglist_addr, &commpage_bak->sglist_addr,
+ sizeof(commpage->sglist_addr));
+ memcpy(&commpage->midi_output, &commpage_bak->midi_output,
+ sizeof(commpage->midi_output));
+ kfree(commpage_bak);
+
+ if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
+ ECHOCARD_NAME, chip)) {
+ snd_echo_free(chip);
+ snd_printk(KERN_ERR "cannot grab irq\n");
+ return -EBUSY;
+ }
+ chip->irq = pci->irq;
+ DE_INIT(("resume irq=%d\n", chip->irq));
+
+#ifdef ECHOCARD_HAS_MIDI
+ if (chip->midi_input_enabled)
+ enable_midi_input(chip, TRUE);
+ if (chip->midi_out)
+ snd_echo_midi_output_trigger(chip->midi_out, 1);
+#endif
+
+ DE_INIT(("resume done\n"));
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+
static void __devexit snd_echo_remove(struct pci_dev *pci)
{
struct echoaudio *chip;
@@ -2169,6 +2330,10 @@
.id_table = snd_echo_ids,
.probe = snd_echo_probe,
.remove = __devexit_p(snd_echo_remove),
+#ifdef CONFIG_PM
+ .suspend = snd_echo_suspend,
+ .resume = snd_echo_resume,
+#endif /* CONFIG_PM */
};
diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h
index f9490ae..1df974d 100644
--- a/sound/pci/echoaudio/echoaudio.h
+++ b/sound/pci/echoaudio/echoaudio.h
@@ -442,13 +442,16 @@
u16 device_id, subdevice_id;
u16 *dsp_code; /* Current DSP code loaded,
* NULL if nothing loaded */
- const struct firmware *dsp_code_to_load;/* DSP code to load */
- const struct firmware *asic_code; /* Current ASIC code */
+ short dsp_code_to_load; /* DSP code to load */
+ short asic_code; /* Current ASIC code */
u32 comm_page_phys; /* Physical address of the
* memory seen by DSP */
volatile u32 __iomem *dsp_registers; /* DSP's register base */
u32 active_mask; /* Chs. active mask or
* punks out */
+#ifdef CONFIG_PM
+ const struct firmware *fw_cache[8]; /* Cached firmwares */
+#endif
#ifdef ECHOCARD_HAS_MIDI
u16 mtc_state; /* State for MIDI input parsing state machine */
@@ -464,11 +467,13 @@
static int wait_handshake(struct echoaudio *chip);
static int send_vector(struct echoaudio *chip, u32 command);
static int get_firmware(const struct firmware **fw_entry,
- const struct firmware *frm, struct echoaudio *chip);
+ struct echoaudio *chip, const short fw_index);
static void free_firmware(const struct firmware *fw_entry);
#ifdef ECHOCARD_HAS_MIDI
static int enable_midi_input(struct echoaudio *chip, char enable);
+static void snd_echo_midi_output_trigger(
+ struct snd_rawmidi_substream *substream, int up);
static int midi_service_irq(struct echoaudio *chip);
static int __devinit snd_echo_midi_create(struct snd_card *card,
struct echoaudio *chip);
diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
index e32a748..658db44 100644
--- a/sound/pci/echoaudio/echoaudio_3g.c
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -227,12 +227,11 @@
/* Give the DSP a few milliseconds to settle down */
mdelay(2);
- err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC,
- &card_fw[FW_3G_ASIC]);
+ err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC);
if (err < 0)
return err;
- chip->asic_code = &card_fw[FW_3G_ASIC];
+ chip->asic_code = FW_3G_ASIC;
/* Now give the new ASIC some time to set up */
msleep(1000);
diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c
index 4df51ef..64417a7 100644
--- a/sound/pci/echoaudio/echoaudio_dsp.c
+++ b/sound/pci/echoaudio/echoaudio_dsp.c
@@ -175,15 +175,15 @@
#ifdef ECHOCARD_HAS_ASIC
/* Load ASIC code - done after the DSP is loaded */
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic)
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic)
{
const struct firmware *fw;
int err;
u32 i, size;
u8 *code;
- if ((err = get_firmware(&fw, asic, chip)) < 0) {
+ err = get_firmware(&fw, chip, asic);
+ if (err < 0) {
snd_printk(KERN_WARNING "Firmware not found !\n");
return err;
}
@@ -245,7 +245,8 @@
return 0;
}
- if ((i = get_firmware(&fw, &card_fw[FW_361_LOADER], chip)) < 0) {
+ i = get_firmware(&fw, chip, FW_361_LOADER);
+ if (i < 0) {
snd_printk(KERN_WARNING "Firmware not found !\n");
return i;
}
@@ -485,7 +486,8 @@
chip->dsp_code = NULL;
}
- if ((err = get_firmware(&fw, chip->dsp_code_to_load, chip)) < 0)
+ err = get_firmware(&fw, chip, chip->dsp_code_to_load);
+ if (err < 0)
return err;
err = load_dsp(chip, (u16 *)fw->data);
free_firmware(fw);
@@ -495,9 +497,6 @@
if ((box_type = load_asic(chip)) < 0)
return box_type; /* error */
- if ((err = restore_dsp_rettings(chip)) < 0)
- return err;
-
return box_type;
}
@@ -657,25 +656,89 @@
static int restore_dsp_rettings(struct echoaudio *chip)
{
- int err;
+ int i, o, err;
DE_INIT(("restore_dsp_settings\n"));
if ((err = check_asic_status(chip)) < 0)
return err;
- /* @ Gina20/Darla20 only. Should be harmless for other cards. */
+ /* Gina20/Darla20 only. Should be harmless for other cards. */
chip->comm_page->gd_clock_state = GD_CLOCK_UNDEF;
chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_UNDEF;
chip->comm_page->handshake = 0xffffffff;
- if ((err = set_sample_rate(chip, chip->sample_rate)) < 0)
+ /* Restore output busses */
+ for (i = 0; i < num_busses_out(chip); i++) {
+ err = set_output_gain(chip, i, chip->output_gain[i]);
+ if (err < 0)
+ return err;
+ }
+
+#ifdef ECHOCARD_HAS_VMIXER
+ for (i = 0; i < num_pipes_out(chip); i++)
+ for (o = 0; o < num_busses_out(chip); o++) {
+ err = set_vmixer_gain(chip, o, i,
+ chip->vmixer_gain[o][i]);
+ if (err < 0)
+ return err;
+ }
+ if (update_vmixer_level(chip) < 0)
+ return -EIO;
+#endif /* ECHOCARD_HAS_VMIXER */
+
+#ifdef ECHOCARD_HAS_MONITOR
+ for (o = 0; o < num_busses_out(chip); o++)
+ for (i = 0; i < num_busses_in(chip); i++) {
+ err = set_monitor_gain(chip, o, i,
+ chip->monitor_gain[o][i]);
+ if (err < 0)
+ return err;
+ }
+#endif /* ECHOCARD_HAS_MONITOR */
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ for (i = 0; i < num_busses_in(chip); i++) {
+ err = set_input_gain(chip, i, chip->input_gain[i]);
+ if (err < 0)
+ return err;
+ }
+#endif /* ECHOCARD_HAS_INPUT_GAIN */
+
+ err = update_output_line_level(chip);
+ if (err < 0)
return err;
- if (chip->meters_enabled)
- if (send_vector(chip, DSP_VC_METERS_ON) < 0)
- return -EIO;
+ err = update_input_line_level(chip);
+ if (err < 0)
+ return err;
+
+ err = set_sample_rate(chip, chip->sample_rate);
+ if (err < 0)
+ return err;
+
+ if (chip->meters_enabled) {
+ err = send_vector(chip, DSP_VC_METERS_ON);
+ if (err < 0)
+ return err;
+ }
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+ if (set_digital_mode(chip, chip->digital_mode) < 0)
+ return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+ if (set_professional_spdif(chip, chip->professional_spdif) < 0)
+ return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+ if (set_phantom_power(chip, chip->phantom_power) < 0)
+ return -EIO;
+#endif
#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+ /* set_input_clock() also restores automute setting */
if (set_input_clock(chip, chip->input_clock) < 0)
return -EIO;
#endif
@@ -685,23 +748,14 @@
return -EIO;
#endif
- if (update_output_line_level(chip) < 0)
- return -EIO;
-
- if (update_input_line_level(chip) < 0)
- return -EIO;
-
-#ifdef ECHOCARD_HAS_VMIXER
- if (update_vmixer_level(chip) < 0)
- return -EIO;
-#endif
-
if (wait_handshake(chip) < 0)
return -EIO;
clear_handshake(chip);
+ if (send_vector(chip, DSP_VC_UPDATE_FLAGS) < 0)
+ return -EIO;
DE_INIT(("restore_dsp_rettings done\n"));
- return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+ return 0;
}
@@ -918,9 +972,6 @@
chip->card_name = ECHOCARD_NAME;
chip->bad_board = TRUE; /* Set TRUE until DSP loaded */
chip->dsp_code = NULL; /* Current DSP code not loaded */
- chip->digital_mode = DIGITAL_MODE_NONE;
- chip->input_clock = ECHO_CLOCK_INTERNAL;
- chip->output_clock = ECHO_CLOCK_WORD;
chip->asic_loaded = FALSE;
memset(chip->comm_page, 0, sizeof(struct comm_page));
@@ -931,7 +982,6 @@
chip->comm_page->midi_out_free_count =
cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE);
chip->comm_page->sample_rate = cpu_to_le32(44100);
- chip->sample_rate = 44100;
/* Set line levels so we don't blast any inputs on startup */
memset(chip->comm_page->monitors, ECHOGAIN_MUTED, MONITOR_ARRAY_SIZE);
@@ -942,50 +992,21 @@
-/* This function initializes the several volume controls for busses and pipes.
-This MUST be called after the DSP is up and running ! */
+/* This function initializes the chip structure with default values, ie. all
+ * muted and internal clock source. Then it copies the settings to the DSP.
+ * This MUST be called after the DSP is up and running !
+ */
static int init_line_levels(struct echoaudio *chip)
{
- int st, i, o;
-
DE_INIT(("init_line_levels\n"));
-
- /* Mute output busses */
- for (i = 0; i < num_busses_out(chip); i++)
- if ((st = set_output_gain(chip, i, ECHOGAIN_MUTED)))
- return st;
- if ((st = update_output_line_level(chip)))
- return st;
-
-#ifdef ECHOCARD_HAS_VMIXER
- /* Mute the Vmixer */
- for (i = 0; i < num_pipes_out(chip); i++)
- for (o = 0; o < num_busses_out(chip); o++)
- if ((st = set_vmixer_gain(chip, o, i, ECHOGAIN_MUTED)))
- return st;
- if ((st = update_vmixer_level(chip)))
- return st;
-#endif /* ECHOCARD_HAS_VMIXER */
-
-#ifdef ECHOCARD_HAS_MONITOR
- /* Mute the monitor mixer */
- for (o = 0; o < num_busses_out(chip); o++)
- for (i = 0; i < num_busses_in(chip); i++)
- if ((st = set_monitor_gain(chip, o, i, ECHOGAIN_MUTED)))
- return st;
- if ((st = update_output_line_level(chip)))
- return st;
-#endif /* ECHOCARD_HAS_MONITOR */
-
-#ifdef ECHOCARD_HAS_INPUT_GAIN
- for (i = 0; i < num_busses_in(chip); i++)
- if ((st = set_input_gain(chip, i, ECHOGAIN_MUTED)))
- return st;
- if ((st = update_input_line_level(chip)))
- return st;
-#endif /* ECHOCARD_HAS_INPUT_GAIN */
-
- return 0;
+ memset(chip->output_gain, ECHOGAIN_MUTED, sizeof(chip->output_gain));
+ memset(chip->input_gain, ECHOGAIN_MUTED, sizeof(chip->input_gain));
+ memset(chip->monitor_gain, ECHOGAIN_MUTED, sizeof(chip->monitor_gain));
+ memset(chip->vmixer_gain, ECHOGAIN_MUTED, sizeof(chip->vmixer_gain));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ chip->output_clock = ECHO_CLOCK_WORD;
+ chip->sample_rate = 44100;
+ return restore_dsp_rettings(chip);
}
diff --git a/sound/pci/echoaudio/gina20.c b/sound/pci/echoaudio/gina20.c
index c0e64b8..2364f8a 100644
--- a/sound/pci/echoaudio/gina20.c
+++ b/sound/pci/echoaudio/gina20.c
@@ -67,7 +67,7 @@
{0, "gina20_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0020, 0, 0, 0}, /* DSP 56301 Gina20 rev.0 */
{0,}
};
diff --git a/sound/pci/echoaudio/gina20_dsp.c b/sound/pci/echoaudio/gina20_dsp.c
index 3f1e747..d1615a0 100644
--- a/sound/pci/echoaudio/gina20_dsp.c
+++ b/sound/pci/echoaudio/gina20_dsp.c
@@ -49,7 +49,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_GINA20_DSP];
+ chip->dsp_code_to_load = FW_GINA20_DSP;
chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
chip->clock_state = GD_CLOCK_UNDEF;
/* Since this card has no ASIC, mark it as loaded so everything
@@ -62,17 +62,20 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
- err = set_professional_spdif(chip, TRUE);
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->professional_spdif = FALSE;
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
diff --git a/sound/pci/echoaudio/gina24.c b/sound/pci/echoaudio/gina24.c
index c36a78d..616b558 100644
--- a/sound/pci/echoaudio/gina24.c
+++ b/sound/pci/echoaudio/gina24.c
@@ -85,7 +85,7 @@
{0, "gina24_361_asic.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56301 Gina24 rev.0 */
{0x1057, 0x1801, 0xECC0, 0x0051, 0, 0, 0}, /* DSP 56301 Gina24 rev.1 */
{0x1057, 0x3410, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56361 Gina24 rev.0 */
diff --git a/sound/pci/echoaudio/gina24_dsp.c b/sound/pci/echoaudio/gina24_dsp.c
index 2fef37a..98f7cfa 100644
--- a/sound/pci/echoaudio/gina24_dsp.c
+++ b/sound/pci/echoaudio/gina24_dsp.c
@@ -33,8 +33,7 @@
static int set_input_clock(struct echoaudio *chip, u16 clock);
static int set_professional_spdif(struct echoaudio *chip, char prof);
static int set_digital_mode(struct echoaudio *chip, u8 mode);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
static int check_asic_status(struct echoaudio *chip);
@@ -58,19 +57,16 @@
ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 |
ECHO_CLOCK_BIT_ADAT;
- chip->professional_spdif = FALSE;
- chip->digital_in_automute = TRUE;
- chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
/* Gina24 comes in both '301 and '361 flavors */
if (chip->device_id == DEVICE_ID_56361) {
- chip->dsp_code_to_load = &card_fw[FW_GINA24_361_DSP];
+ chip->dsp_code_to_load = FW_GINA24_361_DSP;
chip->digital_modes =
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
} else {
- chip->dsp_code_to_load = &card_fw[FW_GINA24_301_DSP];
+ chip->dsp_code_to_load = FW_GINA24_301_DSP;
chip->digital_modes =
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
@@ -82,19 +78,22 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
- err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
- if (err < 0)
- return err;
- err = set_professional_spdif(chip, TRUE);
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
@@ -125,7 +124,7 @@
{
u32 control_reg;
int err;
- const struct firmware *fw;
+ short asic;
if (chip->asic_loaded)
return 1;
@@ -135,14 +134,15 @@
/* Pick the correct ASIC for '301 or '361 Gina24 */
if (chip->device_id == DEVICE_ID_56361)
- fw = &card_fw[FW_GINA24_361_ASIC];
+ asic = FW_GINA24_361_ASIC;
else
- fw = &card_fw[FW_GINA24_301_ASIC];
+ asic = FW_GINA24_301_ASIC;
- if ((err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, fw)) < 0)
+ err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, asic);
+ if (err < 0)
return err;
- chip->asic_code = fw;
+ chip->asic_code = asic;
/* Now give the new ASIC a little time to set up */
mdelay(10);
diff --git a/sound/pci/echoaudio/indigo.c b/sound/pci/echoaudio/indigo.c
index 0a58a7c..776175c 100644
--- a/sound/pci/echoaudio/indigo.c
+++ b/sound/pci/echoaudio/indigo.c
@@ -68,7 +68,7 @@
{0, "indigo_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x0090, 0, 0, 0}, /* Indigo */
{0,}
};
diff --git a/sound/pci/echoaudio/indigo_dsp.c b/sound/pci/echoaudio/indigo_dsp.c
index 0b2cd9c..5e85f14 100644
--- a/sound/pci/echoaudio/indigo_dsp.c
+++ b/sound/pci/echoaudio/indigo_dsp.c
@@ -50,7 +50,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_INDIGO_DSP];
+ chip->dsp_code_to_load = FW_INDIGO_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -60,15 +60,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
return ECHO_CLOCK_BIT_INTERNAL;
diff --git a/sound/pci/echoaudio/indigo_express_dsp.c b/sound/pci/echoaudio/indigo_express_dsp.c
index 9ab625e..2e4ab3e 100644
--- a/sound/pci/echoaudio/indigo_express_dsp.c
+++ b/sound/pci/echoaudio/indigo_express_dsp.c
@@ -61,6 +61,7 @@
control_reg |= clock;
if (control_reg != old_control_reg) {
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
chip->comm_page->control_register = cpu_to_le32(control_reg);
chip->sample_rate = rate;
clear_handshake(chip);
diff --git a/sound/pci/echoaudio/indigodj.c b/sound/pci/echoaudio/indigodj.c
index 2db24d2..8816b0b 100644
--- a/sound/pci/echoaudio/indigodj.c
+++ b/sound/pci/echoaudio/indigodj.c
@@ -68,7 +68,7 @@
{0, "indigo_dj_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x00B0, 0, 0, 0}, /* Indigo DJ*/
{0,}
};
diff --git a/sound/pci/echoaudio/indigodj_dsp.c b/sound/pci/echoaudio/indigodj_dsp.c
index 0839291..68f3c8c 100644
--- a/sound/pci/echoaudio/indigodj_dsp.c
+++ b/sound/pci/echoaudio/indigodj_dsp.c
@@ -50,7 +50,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_INDIGO_DJ_DSP];
+ chip->dsp_code_to_load = FW_INDIGO_DJ_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -60,15 +60,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
return ECHO_CLOCK_BIT_INTERNAL;
diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c
index 2e44316..b1e3652 100644
--- a/sound/pci/echoaudio/indigodjx.c
+++ b/sound/pci/echoaudio/indigodjx.c
@@ -68,7 +68,7 @@
{0, "indigo_djx_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x00E0, 0, 0, 0}, /* Indigo DJx*/
{0,}
};
diff --git a/sound/pci/echoaudio/indigodjx_dsp.c b/sound/pci/echoaudio/indigodjx_dsp.c
index f591fc2..bb9632c7 100644
--- a/sound/pci/echoaudio/indigodjx_dsp.c
+++ b/sound/pci/echoaudio/indigodjx_dsp.c
@@ -48,7 +48,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_INDIGO_DJX_DSP];
+ chip->dsp_code_to_load = FW_INDIGO_DJX_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -59,10 +59,13 @@
return err;
chip->bad_board = FALSE;
- err = init_line_levels(chip);
- if (err < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
diff --git a/sound/pci/echoaudio/indigoio.c b/sound/pci/echoaudio/indigoio.c
index a60c0a0..1035125 100644
--- a/sound/pci/echoaudio/indigoio.c
+++ b/sound/pci/echoaudio/indigoio.c
@@ -69,7 +69,7 @@
{0, "indigo_io_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x00A0, 0, 0, 0}, /* Indigo IO*/
{0,}
};
diff --git a/sound/pci/echoaudio/indigoio_dsp.c b/sound/pci/echoaudio/indigoio_dsp.c
index 0604c8a..beb9a5b6 100644
--- a/sound/pci/echoaudio/indigoio_dsp.c
+++ b/sound/pci/echoaudio/indigoio_dsp.c
@@ -50,7 +50,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_INDIGO_IO_DSP];
+ chip->dsp_code_to_load = FW_INDIGO_IO_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -60,15 +60,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
return ECHO_CLOCK_BIT_INTERNAL;
diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c
index eb3819f..60b7cb2 100644
--- a/sound/pci/echoaudio/indigoiox.c
+++ b/sound/pci/echoaudio/indigoiox.c
@@ -69,7 +69,7 @@
{0, "indigo_iox_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x00D0, 0, 0, 0}, /* Indigo IOx */
{0,}
};
diff --git a/sound/pci/echoaudio/indigoiox_dsp.c b/sound/pci/echoaudio/indigoiox_dsp.c
index f357521..394c6e76 100644
--- a/sound/pci/echoaudio/indigoiox_dsp.c
+++ b/sound/pci/echoaudio/indigoiox_dsp.c
@@ -48,7 +48,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_INDIGO_IOX_DSP];
+ chip->dsp_code_to_load = FW_INDIGO_IOX_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -59,10 +59,13 @@
return err;
chip->bad_board = FALSE;
- err = init_line_levels(chip);
- if (err < 0)
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
diff --git a/sound/pci/echoaudio/layla20.c b/sound/pci/echoaudio/layla20.c
index 5061946..8c3f5c5 100644
--- a/sound/pci/echoaudio/layla20.c
+++ b/sound/pci/echoaudio/layla20.c
@@ -76,7 +76,7 @@
{0, "layla20_asic.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0030, 0, 0, 0}, /* DSP 56301 Layla20 rev.0 */
{0x1057, 0x1801, 0xECC0, 0x0031, 0, 0, 0}, /* DSP 56301 Layla20 rev.1 */
{0,}
diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c
index 83750e9..53ce946 100644
--- a/sound/pci/echoaudio/layla20_dsp.c
+++ b/sound/pci/echoaudio/layla20_dsp.c
@@ -31,8 +31,7 @@
static int read_dsp(struct echoaudio *chip, u32 *data);
static int set_professional_spdif(struct echoaudio *chip, char prof);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
static int check_asic_status(struct echoaudio *chip);
static int update_flags(struct echoaudio *chip);
@@ -54,7 +53,7 @@
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
chip->has_midi = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_LAYLA20_DSP];
+ chip->dsp_code_to_load = FW_LAYLA20_DSP;
chip->input_clock_types =
ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
@@ -65,17 +64,20 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
- err = set_professional_spdif(chip, TRUE);
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->professional_spdif = FALSE;
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
@@ -144,7 +146,7 @@
return 0;
err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA_ASIC,
- &card_fw[FW_LAYLA20_ASIC]);
+ FW_LAYLA20_ASIC);
if (err < 0)
return err;
diff --git a/sound/pci/echoaudio/layla24.c b/sound/pci/echoaudio/layla24.c
index e09e3ea..ed1cc0a 100644
--- a/sound/pci/echoaudio/layla24.c
+++ b/sound/pci/echoaudio/layla24.c
@@ -87,7 +87,7 @@
{0, "layla24_2S_asic.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x0060, 0, 0, 0}, /* DSP 56361 Layla24 rev.0 */
{0,}
};
diff --git a/sound/pci/echoaudio/layla24_dsp.c b/sound/pci/echoaudio/layla24_dsp.c
index d61b5cb..8c04164 100644
--- a/sound/pci/echoaudio/layla24_dsp.c
+++ b/sound/pci/echoaudio/layla24_dsp.c
@@ -32,8 +32,7 @@
static int set_input_clock(struct echoaudio *chip, u16 clock);
static int set_professional_spdif(struct echoaudio *chip, char prof);
static int set_digital_mode(struct echoaudio *chip, u8 mode);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
static int check_asic_status(struct echoaudio *chip);
@@ -54,7 +53,7 @@
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
chip->has_midi = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_LAYLA24_DSP];
+ chip->dsp_code_to_load = FW_LAYLA24_DSP;
chip->input_clock_types =
ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
@@ -62,9 +61,6 @@
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
- chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
- chip->professional_spdif = FALSE;
- chip->digital_in_automute = TRUE;
if ((err = load_firmware(chip)) < 0)
return err;
@@ -73,17 +69,22 @@
if ((err = init_line_levels(chip)) < 0)
return err;
- err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
- if (err < 0)
- return err;
- err = set_professional_spdif(chip, TRUE);
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
@@ -123,18 +124,18 @@
/* Load the ASIC for the PCI card */
err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
- &card_fw[FW_LAYLA24_1_ASIC]);
+ FW_LAYLA24_1_ASIC);
if (err < 0)
return err;
- chip->asic_code = &card_fw[FW_LAYLA24_2S_ASIC];
+ chip->asic_code = FW_LAYLA24_2S_ASIC;
/* Now give the new ASIC a little time to set up */
mdelay(10);
/* Do the external one */
err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
- &card_fw[FW_LAYLA24_2S_ASIC]);
+ FW_LAYLA24_2S_ASIC);
if (err < 0)
return FALSE;
@@ -299,7 +300,7 @@
/* Depending on what digital mode you want, Layla24 needs different ASICs
loaded. This function checks the ASIC needed for the new mode and sees
if it matches the one already loaded. */
-static int switch_asic(struct echoaudio *chip, const struct firmware *asic)
+static int switch_asic(struct echoaudio *chip, short asic)
{
s8 *monitors;
@@ -335,7 +336,7 @@
{
u32 control_reg;
int err, incompatible_clock;
- const struct firmware *asic;
+ short asic;
/* Set clock to "internal" if it's not compatible with the new mode */
incompatible_clock = FALSE;
@@ -344,12 +345,12 @@
case DIGITAL_MODE_SPDIF_RCA:
if (chip->input_clock == ECHO_CLOCK_ADAT)
incompatible_clock = TRUE;
- asic = &card_fw[FW_LAYLA24_2S_ASIC];
+ asic = FW_LAYLA24_2S_ASIC;
break;
case DIGITAL_MODE_ADAT:
if (chip->input_clock == ECHO_CLOCK_SPDIF)
incompatible_clock = TRUE;
- asic = &card_fw[FW_LAYLA24_2A_ASIC];
+ asic = FW_LAYLA24_2A_ASIC;
break;
default:
DE_ACT(("Digital mode not supported: %d\n", mode));
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
index f05c8c0..cc2bbfc 100644
--- a/sound/pci/echoaudio/mia.c
+++ b/sound/pci/echoaudio/mia.c
@@ -77,7 +77,7 @@
{0, "mia_dsp.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x3410, 0xECC0, 0x0080, 0, 0, 0}, /* DSP 56361 Mia rev.0 */
{0x1057, 0x3410, 0xECC0, 0x0081, 0, 0, 0}, /* DSP 56361 Mia rev.1 */
{0,}
diff --git a/sound/pci/echoaudio/mia_dsp.c b/sound/pci/echoaudio/mia_dsp.c
index 5514051..6ebfa6e 100644
--- a/sound/pci/echoaudio/mia_dsp.c
+++ b/sound/pci/echoaudio/mia_dsp.c
@@ -53,7 +53,7 @@
chip->device_id = device_id;
chip->subdevice_id = subdevice_id;
chip->bad_board = TRUE;
- chip->dsp_code_to_load = &card_fw[FW_MIA_DSP];
+ chip->dsp_code_to_load = FW_MIA_DSP;
/* Since this card has no ASIC, mark it as loaded so everything
works OK */
chip->asic_loaded = TRUE;
@@ -66,15 +66,19 @@
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)))
- return err;
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
diff --git a/sound/pci/echoaudio/mona.c b/sound/pci/echoaudio/mona.c
index b05bad9..3e7e0182 100644
--- a/sound/pci/echoaudio/mona.c
+++ b/sound/pci/echoaudio/mona.c
@@ -92,7 +92,7 @@
{0, "mona_2_asic.fw"}
};
-static struct pci_device_id snd_echo_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_echo_ids) = {
{0x1057, 0x1801, 0xECC0, 0x0070, 0, 0, 0}, /* DSP 56301 Mona rev.0 */
{0x1057, 0x1801, 0xECC0, 0x0071, 0, 0, 0}, /* DSP 56301 Mona rev.1 */
{0x1057, 0x1801, 0xECC0, 0x0072, 0, 0, 0}, /* DSP 56301 Mona rev.2 */
diff --git a/sound/pci/echoaudio/mona_dsp.c b/sound/pci/echoaudio/mona_dsp.c
index eaa619b..6e6a7eb 100644
--- a/sound/pci/echoaudio/mona_dsp.c
+++ b/sound/pci/echoaudio/mona_dsp.c
@@ -33,8 +33,7 @@
static int set_input_clock(struct echoaudio *chip, u16 clock);
static int set_professional_spdif(struct echoaudio *chip, char prof);
static int set_digital_mode(struct echoaudio *chip, u8 mode);
-static int load_asic_generic(struct echoaudio *chip, u32 cmd,
- const struct firmware *asic);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
static int check_asic_status(struct echoaudio *chip);
@@ -64,32 +63,30 @@
/* Mona comes in both '301 and '361 flavors */
if (chip->device_id == DEVICE_ID_56361)
- chip->dsp_code_to_load = &card_fw[FW_MONA_361_DSP];
+ chip->dsp_code_to_load = FW_MONA_361_DSP;
else
- chip->dsp_code_to_load = &card_fw[FW_MONA_301_DSP];
-
- chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
- chip->professional_spdif = FALSE;
- chip->digital_in_automute = TRUE;
+ chip->dsp_code_to_load = FW_MONA_301_DSP;
if ((err = load_firmware(chip)) < 0)
return err;
chip->bad_board = FALSE;
- if ((err = init_line_levels(chip)) < 0)
- return err;
-
- err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
- if (err < 0)
- return err;
- err = set_professional_spdif(chip, TRUE);
-
DE_INIT(("init_hw done\n"));
return err;
}
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+ return init_line_levels(chip);
+}
+
+
+
static u32 detect_input_clocks(const struct echoaudio *chip)
{
u32 clocks_from_dsp, clock_bits;
@@ -120,7 +117,7 @@
{
u32 control_reg;
int err;
- const struct firmware *asic;
+ short asic;
if (chip->asic_loaded)
return 0;
@@ -128,9 +125,9 @@
mdelay(10);
if (chip->device_id == DEVICE_ID_56361)
- asic = &card_fw[FW_MONA_361_1_ASIC48];
+ asic = FW_MONA_361_1_ASIC48;
else
- asic = &card_fw[FW_MONA_301_1_ASIC48];
+ asic = FW_MONA_301_1_ASIC48;
err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC, asic);
if (err < 0)
@@ -141,7 +138,7 @@
/* Do the external one */
err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_EXTERNAL_ASIC,
- &card_fw[FW_MONA_2_ASIC]);
+ FW_MONA_2_ASIC);
if (err < 0)
return err;
@@ -165,22 +162,22 @@
if it matches the one already loaded. */
static int switch_asic(struct echoaudio *chip, char double_speed)
{
- const struct firmware *asic;
int err;
+ short asic;
/* Check the clock detect bits to see if this is
a single-speed clock or a double-speed clock; load
a new ASIC if necessary. */
if (chip->device_id == DEVICE_ID_56361) {
if (double_speed)
- asic = &card_fw[FW_MONA_361_1_ASIC96];
+ asic = FW_MONA_361_1_ASIC96;
else
- asic = &card_fw[FW_MONA_361_1_ASIC48];
+ asic = FW_MONA_361_1_ASIC48;
} else {
if (double_speed)
- asic = &card_fw[FW_MONA_301_1_ASIC96];
+ asic = FW_MONA_301_1_ASIC96;
else
- asic = &card_fw[FW_MONA_301_1_ASIC48];
+ asic = FW_MONA_301_1_ASIC48;
}
if (asic != chip->asic_code) {
@@ -200,7 +197,7 @@
static int set_sample_rate(struct echoaudio *chip, u32 rate)
{
u32 control_reg, clock;
- const struct firmware *asic;
+ short asic;
char force_write;
/* Only set the clock for internal mode. */
@@ -218,14 +215,14 @@
if (chip->digital_mode == DIGITAL_MODE_ADAT)
return -EINVAL;
if (chip->device_id == DEVICE_ID_56361)
- asic = &card_fw[FW_MONA_361_1_ASIC96];
+ asic = FW_MONA_361_1_ASIC96;
else
- asic = &card_fw[FW_MONA_301_1_ASIC96];
+ asic = FW_MONA_301_1_ASIC96;
} else {
if (chip->device_id == DEVICE_ID_56361)
- asic = &card_fw[FW_MONA_361_1_ASIC48];
+ asic = FW_MONA_361_1_ASIC48;
else
- asic = &card_fw[FW_MONA_301_1_ASIC48];
+ asic = FW_MONA_301_1_ASIC48;
}
force_write = 0;
@@ -410,8 +407,8 @@
case DIGITAL_MODE_ADAT:
/* If the current ASIC is the 96KHz ASIC, switch the ASIC
and set to 48 KHz */
- if (chip->asic_code == &card_fw[FW_MONA_361_1_ASIC96] ||
- chip->asic_code == &card_fw[FW_MONA_301_1_ASIC96]) {
+ if (chip->asic_code == FW_MONA_361_1_ASIC96 ||
+ chip->asic_code == FW_MONA_301_1_ASIC96) {
set_sample_rate(chip, 48000);
}
control_reg |= GML_ADAT_MODE;
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index 168af67..4203782 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -76,7 +76,7 @@
/*
* Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400
*/
-static struct pci_device_id snd_emu10k1_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_emu10k1_ids) = {
{ PCI_VDEVICE(CREATIVE, 0x0002), 0 }, /* EMU10K1 */
{ PCI_VDEVICE(CREATIVE, 0x0004), 1 }, /* Audigy */
{ PCI_VDEVICE(CREATIVE, 0x0008), 1 }, /* Audigy 2 Value SB0400 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 1d369ff..df47f73 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1605,7 +1605,7 @@
}
// PCI IDs
-static struct pci_device_id snd_emu10k1x_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_emu10k1x_ids) = {
{ PCI_VDEVICE(CREATIVE, 0x0006), 0 }, /* Dell OEM version (EMU10K1) */
{ 0, }
};
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 2b82c5c..c7fba53 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -443,7 +443,7 @@
static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id);
-static struct pci_device_id snd_audiopci_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_audiopci_ids) = {
#ifdef CHIP1370
{ PCI_VDEVICE(ENSONIQ, 0x5000), 0, }, /* ES1370 */
#endif
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index fb83e1f..553b752 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -243,7 +243,7 @@
static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
-static struct pci_device_id snd_es1938_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_es1938_ids) = {
{ PCI_VDEVICE(ESS, 0x1969), 0, }, /* Solo-1 */
{ 0, }
};
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index a11f453..ecaea9f 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -551,7 +551,7 @@
static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id);
-static struct pci_device_id snd_es1968_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_es1968_ids) = {
/* Maestro 1 */
{ 0x1285, 0x0100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TYPE_MAESTRO },
/* Maestro 2 */
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 83508b3..e1baad7 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -205,7 +205,7 @@
#endif
};
-static struct pci_device_id snd_fm801_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_fm801_ids) = {
{ 0x1319, 0x0801, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, }, /* FM801 */
{ 0x5213, 0x0510, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, }, /* Gallant Odyssey Sound 4 */
{ 0, }
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f98b47c..76d3c4c 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -824,6 +824,9 @@
struct hda_pincfg *pin;
unsigned int oldcfg;
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ return -EINVAL;
+
oldcfg = snd_hda_codec_get_pincfg(codec, nid);
pin = look_up_pincfg(codec, list, nid);
if (!pin) {
@@ -899,6 +902,25 @@
}
}
+/**
+ * snd_hda_shutup_pins - Shut up all pins
+ * @codec: the HDA codec
+ *
+ * Clear all pin controls to shup up before suspend for avoiding click noise.
+ * The controls aren't cached so that they can be resumed properly.
+ */
+void snd_hda_shutup_pins(struct hda_codec *codec)
+{
+ int i;
+ for (i = 0; i < codec->init_pins.used; i++) {
+ struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
+ /* use read here for syncing after issuing each verb */
+ snd_hda_codec_read(codec, pin->nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
+ }
+}
+EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
+
static void init_hda_cache(struct hda_cache_rec *cache,
unsigned int record_size);
static void free_hda_cache(struct hda_cache_rec *cache);
@@ -931,6 +953,7 @@
#endif
list_del(&codec->list);
snd_array_free(&codec->mixers);
+ snd_array_free(&codec->nids);
codec->bus->caddr_tbl[codec->addr] = NULL;
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
@@ -985,7 +1008,8 @@
mutex_init(&codec->control_mutex);
init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
- snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 60);
+ snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
+ snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
if (codec->bus->modelname) {
@@ -1708,7 +1732,7 @@
EXPORT_SYMBOL_HDA(snd_hda_find_mixer_ctl);
/**
- * snd_hda_ctl-add - Add a control element and assign to the codec
+ * snd_hda_ctl_add - Add a control element and assign to the codec
* @codec: HD-audio codec
* @nid: corresponding NID (optional)
* @kctl: the control element to assign
@@ -1723,19 +1747,25 @@
*
* snd_hda_ctl_add() checks the control subdev id field whether
* #HDA_SUBDEV_NID_FLAG bit is set. If set (and @nid is zero), the lower
- * bits value is taken as the NID to assign.
+ * bits value is taken as the NID to assign. The #HDA_NID_ITEM_AMP bit
+ * specifies if kctl->private_value is a HDA amplifier value.
*/
int snd_hda_ctl_add(struct hda_codec *codec, hda_nid_t nid,
struct snd_kcontrol *kctl)
{
int err;
+ unsigned short flags = 0;
struct hda_nid_item *item;
- if (kctl->id.subdevice & HDA_SUBDEV_NID_FLAG) {
+ if (kctl->id.subdevice & HDA_SUBDEV_AMP_FLAG) {
+ flags |= HDA_NID_ITEM_AMP;
if (nid == 0)
- nid = kctl->id.subdevice & 0xffff;
- kctl->id.subdevice = 0;
+ nid = get_amp_nid_(kctl->private_value);
}
+ if ((kctl->id.subdevice & HDA_SUBDEV_NID_FLAG) != 0 && nid == 0)
+ nid = kctl->id.subdevice & 0xffff;
+ if (kctl->id.subdevice & (HDA_SUBDEV_NID_FLAG|HDA_SUBDEV_AMP_FLAG))
+ kctl->id.subdevice = 0;
err = snd_ctl_add(codec->bus->card, kctl);
if (err < 0)
return err;
@@ -1744,11 +1774,41 @@
return -ENOMEM;
item->kctl = kctl;
item->nid = nid;
+ item->flags = flags;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_ctl_add);
/**
+ * snd_hda_add_nid - Assign a NID to a control element
+ * @codec: HD-audio codec
+ * @nid: corresponding NID (optional)
+ * @kctl: the control element to assign
+ * @index: index to kctl
+ *
+ * Add the given control element to an array inside the codec instance.
+ * This function is used when #snd_hda_ctl_add cannot be used for 1:1
+ * NID:KCTL mapping - for example "Capture Source" selector.
+ */
+int snd_hda_add_nid(struct hda_codec *codec, struct snd_kcontrol *kctl,
+ unsigned int index, hda_nid_t nid)
+{
+ struct hda_nid_item *item;
+
+ if (nid > 0) {
+ item = snd_array_new(&codec->nids);
+ if (!item)
+ return -ENOMEM;
+ item->kctl = kctl;
+ item->index = index;
+ item->nid = nid;
+ return 0;
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL_HDA(snd_hda_add_nid);
+
+/**
* snd_hda_ctls_clear - Clear all controls assigned to the given codec
* @codec: HD-audio codec
*/
@@ -1759,6 +1819,7 @@
for (i = 0; i < codec->mixers.used; i++)
snd_ctl_remove(codec->bus->card, items[i].kctl);
snd_array_free(&codec->mixers);
+ snd_array_free(&codec->nids);
}
/* pseudo device locking
@@ -2706,7 +2767,8 @@
snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE,
power_state);
/* partial workaround for "azx_get_response timeout" */
- if (power_state == AC_PWRST_D0)
+ if (power_state == AC_PWRST_D0 &&
+ (codec->vendor_id & 0xffff0000) == 0x14f10000)
msleep(10);
nid = codec->start_nid;
@@ -2740,7 +2802,6 @@
if (power_state == AC_PWRST_D0) {
unsigned long end_time;
int state;
- msleep(10);
/* wait until the codec reachs to D0 */
end_time = jiffies + msecs_to_jiffies(500);
do {
@@ -3214,6 +3275,8 @@
/*
* get the empty PCM device number to assign
+ *
+ * note the max device number is limited by HDA_MAX_PCMS, currently 10
*/
static int get_empty_pcm_device(struct hda_bus *bus, int type)
{
@@ -3478,6 +3541,8 @@
for (; knew->name; knew++) {
struct snd_kcontrol *kctl;
+ if (knew->iface == -1) /* skip this codec private value */
+ continue;
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
return -ENOMEM;
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 0a770a2..b75da47 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -527,6 +527,9 @@
/* max. codec address */
#define HDA_MAX_CODEC_ADDRESS 0x0f
+/* max number of PCM devics per card */
+#define HDA_MAX_PCMS 10
+
/*
* generic arrays
*/
@@ -789,6 +792,7 @@
u32 *wcaps;
struct snd_array mixers; /* list of assigned mixer elements */
+ struct snd_array nids; /* list of mapped mixer elements */
struct hda_cache_rec amp_cache; /* cache for amp access */
struct hda_cache_rec cmd_cache; /* cache for other commands */
@@ -898,6 +902,7 @@
unsigned int cfg);
int snd_hda_add_pincfg(struct hda_codec *codec, struct snd_array *list,
hda_nid_t nid, unsigned int cfg); /* for hwdep */
+void snd_hda_shutup_pins(struct hda_codec *codec);
/*
* Mixer
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 092c6a7..5ea2128 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -861,7 +861,8 @@
}
/* create input MUX if multiple sources are available */
- err = snd_hda_ctl_add(codec, 0, snd_ctl_new1(&cap_sel, codec));
+ err = snd_hda_ctl_add(codec, spec->adc_node->nid,
+ snd_ctl_new1(&cap_sel, codec));
if (err < 0)
return err;
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 40ccb41..a1fc837 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -293,8 +293,11 @@
{ \
struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
struct hda_codec *codec = hwdep->private_data; \
- char *after; \
- codec->type = simple_strtoul(buf, &after, 0); \
+ unsigned long val; \
+ int err = strict_strtoul(buf, 0, &val); \
+ if (err < 0) \
+ return err; \
+ codec->type = val; \
return count; \
}
@@ -622,6 +625,10 @@
LINE_MODE_PINCFG,
LINE_MODE_VERB,
LINE_MODE_HINT,
+ LINE_MODE_VENDOR_ID,
+ LINE_MODE_SUBSYSTEM_ID,
+ LINE_MODE_REVISION_ID,
+ LINE_MODE_CHIP_NAME,
NUM_LINE_MODES,
};
@@ -651,53 +658,71 @@
}
/* parse the contents after the other command tags, [pincfg], [verb],
- * [hint] and [model]
+ * [vendor_id], [subsystem_id], [revision_id], [chip_name], [hint] and [model]
* just pass to the sysfs helper (only when any codec was specified)
*/
static void parse_pincfg_mode(char *buf, struct hda_bus *bus,
struct hda_codec **codecp)
{
- if (!*codecp)
- return;
parse_user_pin_configs(*codecp, buf);
}
static void parse_verb_mode(char *buf, struct hda_bus *bus,
struct hda_codec **codecp)
{
- if (!*codecp)
- return;
parse_init_verbs(*codecp, buf);
}
static void parse_hint_mode(char *buf, struct hda_bus *bus,
struct hda_codec **codecp)
{
- if (!*codecp)
- return;
parse_hints(*codecp, buf);
}
static void parse_model_mode(char *buf, struct hda_bus *bus,
struct hda_codec **codecp)
{
- if (!*codecp)
- return;
kfree((*codecp)->modelname);
(*codecp)->modelname = kstrdup(buf, GFP_KERNEL);
}
+static void parse_chip_name_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ kfree((*codecp)->chip_name);
+ (*codecp)->chip_name = kstrdup(buf, GFP_KERNEL);
+}
+
+#define DEFINE_PARSE_ID_MODE(name) \
+static void parse_##name##_mode(char *buf, struct hda_bus *bus, \
+ struct hda_codec **codecp) \
+{ \
+ unsigned long val; \
+ if (!strict_strtoul(buf, 0, &val)) \
+ (*codecp)->name = val; \
+}
+
+DEFINE_PARSE_ID_MODE(vendor_id);
+DEFINE_PARSE_ID_MODE(subsystem_id);
+DEFINE_PARSE_ID_MODE(revision_id);
+
+
struct hda_patch_item {
const char *tag;
void (*parser)(char *buf, struct hda_bus *bus, struct hda_codec **retc);
+ int need_codec;
};
static struct hda_patch_item patch_items[NUM_LINE_MODES] = {
- [LINE_MODE_CODEC] = { "[codec]", parse_codec_mode },
- [LINE_MODE_MODEL] = { "[model]", parse_model_mode },
- [LINE_MODE_VERB] = { "[verb]", parse_verb_mode },
- [LINE_MODE_PINCFG] = { "[pincfg]", parse_pincfg_mode },
- [LINE_MODE_HINT] = { "[hint]", parse_hint_mode },
+ [LINE_MODE_CODEC] = { "[codec]", parse_codec_mode, 0 },
+ [LINE_MODE_MODEL] = { "[model]", parse_model_mode, 1 },
+ [LINE_MODE_VERB] = { "[verb]", parse_verb_mode, 1 },
+ [LINE_MODE_PINCFG] = { "[pincfg]", parse_pincfg_mode, 1 },
+ [LINE_MODE_HINT] = { "[hint]", parse_hint_mode, 1 },
+ [LINE_MODE_VENDOR_ID] = { "[vendor_id]", parse_vendor_id_mode, 1 },
+ [LINE_MODE_SUBSYSTEM_ID] = { "[subsystem_id]", parse_subsystem_id_mode, 1 },
+ [LINE_MODE_REVISION_ID] = { "[revision_id]", parse_revision_id_mode, 1 },
+ [LINE_MODE_CHIP_NAME] = { "[chip_name]", parse_chip_name_mode, 1 },
};
/* check the line starting with '[' -- change the parser mode accodingly */
@@ -780,7 +805,8 @@
continue;
if (*buf == '[')
line_mode = parse_line_mode(buf, bus);
- else if (patch_items[line_mode].parser)
+ else if (patch_items[line_mode].parser &&
+ (codec || !patch_items[line_mode].need_codec))
patch_items[line_mode].parser(buf, bus, &codec);
}
release_firmware(fw);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index ff6da6f..d5c93ad 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -125,6 +125,7 @@
"{Intel, ICH9},"
"{Intel, ICH10},"
"{Intel, PCH},"
+ "{Intel, CPT},"
"{Intel, SCH},"
"{ATI, SB450},"
"{ATI, SB600},"
@@ -259,8 +260,6 @@
#define AZX_MAX_FRAG 32
/* max buffer size - no h/w limit, you can increase as you like */
#define AZX_MAX_BUF_SIZE (1024*1024*1024)
-/* max number of PCM devics per card */
-#define AZX_MAX_PCMS 8
/* RIRB int mask: overrun[2], response[0] */
#define RIRB_INT_RESPONSE 0x01
@@ -408,7 +407,7 @@
struct azx_dev *azx_dev;
/* PCM */
- struct snd_pcm *pcm[AZX_MAX_PCMS];
+ struct snd_pcm *pcm[HDA_MAX_PCMS];
/* HD codec */
unsigned short codec_mask;
@@ -449,6 +448,7 @@
/* driver types */
enum {
AZX_DRIVER_ICH,
+ AZX_DRIVER_PCH,
AZX_DRIVER_SCH,
AZX_DRIVER_ATI,
AZX_DRIVER_ATIHDMI,
@@ -463,6 +463,7 @@
static char *driver_short_names[] __devinitdata = {
[AZX_DRIVER_ICH] = "HDA Intel",
+ [AZX_DRIVER_PCH] = "HDA Intel PCH",
[AZX_DRIVER_SCH] = "HDA Intel MID",
[AZX_DRIVER_ATI] = "HDA ATI SB",
[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
@@ -968,8 +969,8 @@
azx_dev->insufficient = 1;
/* enable SIE */
- azx_writeb(chip, INTCTL,
- azx_readb(chip, INTCTL) | (1 << azx_dev->index));
+ azx_writel(chip, INTCTL,
+ azx_readl(chip, INTCTL) | (1 << azx_dev->index));
/* set DMA start and interrupt mask */
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) |
SD_CTL_DMA_START | SD_INT_MASK);
@@ -988,8 +989,8 @@
{
azx_stream_clear(chip, azx_dev);
/* disable SIE */
- azx_writeb(chip, INTCTL,
- azx_readb(chip, INTCTL) & ~(1 << azx_dev->index));
+ azx_writel(chip, INTCTL,
+ azx_readl(chip, INTCTL) & ~(1 << azx_dev->index));
}
@@ -1065,6 +1066,7 @@
0x01, NVIDIA_HDA_ENABLE_COHBIT);
break;
case AZX_DRIVER_SCH:
+ case AZX_DRIVER_PCH:
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) {
pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC,
@@ -1350,7 +1352,7 @@
if (chip->initialized) {
int i;
- for (i = 0; i < AZX_MAX_PCMS; i++)
+ for (i = 0; i < HDA_MAX_PCMS; i++)
snd_pcm_suspend_all(chip->pcm[i]);
snd_hda_suspend(chip->bus);
snd_hda_resume(chip->bus);
@@ -1412,7 +1414,7 @@
chip->codec_mask &= ~(1 << c);
/* More badly, accessing to a non-existing
* codec often screws up the controller chip,
- * and distrubs the further communications.
+ * and disturbs the further communications.
* Thus if an error occurs during probing,
* better to reset the controller chip to
* get back to the sanity state.
@@ -1983,7 +1985,7 @@
int pcm_dev = cpcm->device;
int s, err;
- if (pcm_dev >= AZX_MAX_PCMS) {
+ if (pcm_dev >= HDA_MAX_PCMS) {
snd_printk(KERN_ERR SFX "Invalid PCM device number %d\n",
pcm_dev);
return -EINVAL;
@@ -2139,7 +2141,7 @@
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
azx_clear_irq_pending(chip);
- for (i = 0; i < AZX_MAX_PCMS; i++)
+ for (i = 0; i < HDA_MAX_PCMS; i++)
snd_pcm_suspend_all(chip->pcm[i]);
if (chip->initialized)
snd_hda_suspend(chip->bus);
@@ -2262,6 +2264,7 @@
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
{}
@@ -2418,6 +2421,7 @@
if (bdl_pos_adj[dev] < 0) {
switch (chip->driver_type) {
case AZX_DRIVER_ICH:
+ case AZX_DRIVER_PCH:
bdl_pos_adj[dev] = 1;
break;
default:
@@ -2683,7 +2687,7 @@
}
/* PCI IDs */
-static struct pci_device_id azx_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* ICH 6..10 */
{ PCI_DEVICE(0x8086, 0x2668), .driver_data = AZX_DRIVER_ICH },
{ PCI_DEVICE(0x8086, 0x27d8), .driver_data = AZX_DRIVER_ICH },
@@ -2696,6 +2700,8 @@
{ PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH },
/* PCH */
{ PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH },
+ /* CPT */
+ { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH },
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
/* ATI SB 450/600 */
@@ -2723,32 +2729,10 @@
/* ULI M5461 */
{ PCI_DEVICE(0x10b9, 0x5461), .driver_data = AZX_DRIVER_ULI },
/* NVIDIA MCP */
- { PCI_DEVICE(0x10de, 0x026c), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0371), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x03e4), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x03f0), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x044a), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x044b), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x055c), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x055d), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0590), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0774), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0775), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0776), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0777), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x07fc), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x07fd), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0ac0), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0ac1), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0ac2), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0ac3), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0be2), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0be3), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0be4), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0d94), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0d95), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0d96), .driver_data = AZX_DRIVER_NVIDIA },
- { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
+ .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+ .class_mask = 0xffffff,
+ .driver_data = AZX_DRIVER_NVIDIA },
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
/* Creative X-Fi (CA0110-IBG) */
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 5778ae8..7cee364 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -31,6 +31,7 @@
* in snd_hda_ctl_add(), so that this value won't appear in the outside.
*/
#define HDA_SUBDEV_NID_FLAG (1U << 31)
+#define HDA_SUBDEV_AMP_FLAG (1U << 30)
/*
* for mixer controls
@@ -42,7 +43,7 @@
/* mono volume with index (index=0,1,...) (channel=1,2) */
#define HDA_CODEC_VOLUME_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \
- .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
+ .subdevice = HDA_SUBDEV_AMP_FLAG, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
@@ -63,7 +64,7 @@
/* mono mute switch with index (index=0,1,...) (channel=1,2) */
#define HDA_CODEC_MUTE_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \
- .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
+ .subdevice = HDA_SUBDEV_AMP_FLAG, \
.info = snd_hda_mixer_amp_switch_info, \
.get = snd_hda_mixer_amp_switch_get, \
.put = snd_hda_mixer_amp_switch_put, \
@@ -81,7 +82,7 @@
/* special beep mono mute switch with index (index=0,1,...) (channel=1,2) */
#define HDA_CODEC_MUTE_BEEP_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \
- .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
+ .subdevice = HDA_SUBDEV_AMP_FLAG, \
.info = snd_hda_mixer_amp_switch_info, \
.get = snd_hda_mixer_amp_switch_get, \
.put = snd_hda_mixer_amp_switch_put_beep, \
@@ -464,13 +465,20 @@
u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid);
int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid);
+/* flags for hda_nid_item */
+#define HDA_NID_ITEM_AMP (1<<0)
+
struct hda_nid_item {
struct snd_kcontrol *kctl;
+ unsigned int index;
hda_nid_t nid;
+ unsigned short flags;
};
int snd_hda_ctl_add(struct hda_codec *codec, hda_nid_t nid,
struct snd_kcontrol *kctl);
+int snd_hda_add_nid(struct hda_codec *codec, struct snd_kcontrol *kctl,
+ unsigned int index, hda_nid_t nid);
void snd_hda_ctls_clear(struct hda_codec *codec);
/*
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index c9afc04..f97d35d 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -61,18 +61,29 @@
return "UNKNOWN Widget";
}
-static void print_nid_mixers(struct snd_info_buffer *buffer,
- struct hda_codec *codec, hda_nid_t nid)
+static void print_nid_array(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid,
+ struct snd_array *array)
{
int i;
- struct hda_nid_item *items = codec->mixers.list;
+ struct hda_nid_item *items = array->list, *item;
struct snd_kcontrol *kctl;
- for (i = 0; i < codec->mixers.used; i++) {
- if (items[i].nid == nid) {
- kctl = items[i].kctl;
+ for (i = 0; i < array->used; i++) {
+ item = &items[i];
+ if (item->nid == nid) {
+ kctl = item->kctl;
snd_iprintf(buffer,
" Control: name=\"%s\", index=%i, device=%i\n",
- kctl->id.name, kctl->id.index, kctl->id.device);
+ kctl->id.name, kctl->id.index + item->index,
+ kctl->id.device);
+ if (item->flags & HDA_NID_ITEM_AMP)
+ snd_iprintf(buffer,
+ " ControlAmp: chs=%lu, dir=%s, "
+ "idx=%lu, ofs=%lu\n",
+ get_amp_channels(kctl),
+ get_amp_direction(kctl) ? "Out" : "In",
+ get_amp_index(kctl),
+ get_amp_offset(kctl));
}
}
}
@@ -528,7 +539,8 @@
(data & (1<<i)) ? 1 : 0,
(unsol & (1<<i)) ? 1 : 0);
/* FIXME: add GPO and GPI pin information */
- print_nid_mixers(buffer, codec, nid);
+ print_nid_array(buffer, codec, nid, &codec->mixers);
+ print_nid_array(buffer, codec, nid, &codec->nids);
}
static void print_codec_info(struct snd_info_entry *entry,
@@ -608,7 +620,8 @@
snd_iprintf(buffer, " CP");
snd_iprintf(buffer, "\n");
- print_nid_mixers(buffer, codec, nid);
+ print_nid_array(buffer, codec, nid, &codec->mixers);
+ print_nid_array(buffer, codec, nid, &codec->nids);
print_nid_pcms(buffer, codec, nid);
/* volume knob is a special widget that always have connection
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 69a941c..e6d1bdf 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -174,6 +174,7 @@
static int ad198x_build_controls(struct hda_codec *codec)
{
struct ad198x_spec *spec = codec->spec;
+ struct snd_kcontrol *kctl;
unsigned int i;
int err;
@@ -208,9 +209,7 @@
if (!kctl)
return -ENOMEM;
kctl->private_value = spec->beep_amp;
- err = snd_hda_ctl_add(codec,
- get_amp_nid_(spec->beep_amp),
- kctl);
+ err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
}
@@ -239,6 +238,27 @@
}
ad198x_free_kctls(codec); /* no longer needed */
+
+ /* assign Capture Source enums to NID */
+ kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+ if (!kctl)
+ kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+ for (i = 0; kctl && i < kctl->count; i++) {
+ err = snd_hda_add_nid(codec, kctl, i, spec->capsrc_nids[i]);
+ if (err < 0)
+ return err;
+ }
+
+ /* assign IEC958 enums to NID */
+ kctl = snd_hda_find_mixer_ctl(codec,
+ SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source");
+ if (kctl) {
+ err = snd_hda_add_nid(codec, kctl, 0,
+ spec->multiout.dig_out_nid);
+ if (err < 0)
+ return err;
+ }
+
return 0;
}
@@ -421,6 +441,11 @@
return 0;
}
+static inline void ad198x_shutup(struct hda_codec *codec)
+{
+ snd_hda_shutup_pins(codec);
+}
+
static void ad198x_free_kctls(struct hda_codec *codec)
{
struct ad198x_spec *spec = codec->spec;
@@ -434,6 +459,46 @@
snd_array_free(&spec->kctls);
}
+static void ad198x_power_eapd_write(struct hda_codec *codec, hda_nid_t front,
+ hda_nid_t hp)
+{
+ struct ad198x_spec *spec = codec->spec;
+ snd_hda_codec_write(codec, front, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ !spec->inv_eapd ? 0x00 : 0x02);
+ snd_hda_codec_write(codec, hp, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ !spec->inv_eapd ? 0x00 : 0x02);
+}
+
+static void ad198x_power_eapd(struct hda_codec *codec)
+{
+ /* We currently only handle front, HP */
+ switch (codec->vendor_id) {
+ case 0x11d41882:
+ case 0x11d4882a:
+ case 0x11d41884:
+ case 0x11d41984:
+ case 0x11d41883:
+ case 0x11d4184a:
+ case 0x11d4194a:
+ case 0x11d4194b:
+ ad198x_power_eapd_write(codec, 0x12, 0x11);
+ break;
+ case 0x11d41981:
+ case 0x11d41983:
+ ad198x_power_eapd_write(codec, 0x05, 0x06);
+ break;
+ case 0x11d41986:
+ ad198x_power_eapd_write(codec, 0x1b, 0x1a);
+ break;
+ case 0x11d41988:
+ case 0x11d4198b:
+ case 0x11d4989a:
+ case 0x11d4989b:
+ ad198x_power_eapd_write(codec, 0x29, 0x22);
+ break;
+ }
+}
+
static void ad198x_free(struct hda_codec *codec)
{
struct ad198x_spec *spec = codec->spec;
@@ -441,11 +506,29 @@
if (!spec)
return;
+ ad198x_shutup(codec);
ad198x_free_kctls(codec);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
+#ifdef SND_HDA_NEEDS_RESUME
+static int ad198x_suspend(struct hda_codec *codec, pm_message_t state)
+{
+ ad198x_shutup(codec);
+ ad198x_power_eapd(codec);
+ return 0;
+}
+
+static int ad198x_resume(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ snd_hda_codec_resume_amp(codec);
+ snd_hda_codec_resume_cache(codec);
+ return 0;
+}
+#endif
+
static struct hda_codec_ops ad198x_patch_ops = {
.build_controls = ad198x_build_controls,
.build_pcms = ad198x_build_pcms,
@@ -454,6 +537,11 @@
#ifdef CONFIG_SND_HDA_POWER_SAVE
.check_power_status = ad198x_check_power_status,
#endif
+#ifdef SND_HDA_NEEDS_RESUME
+ .suspend = ad198x_suspend,
+ .resume = ad198x_resume,
+#endif
+ .reboot_notify = ad198x_shutup,
};
@@ -701,6 +789,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "External Amplifier",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x1b,
.info = ad198x_eapd_info,
.get = ad198x_eapd_get,
.put = ad198x_eapd_put,
@@ -808,6 +897,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = ad1986a_hp_master_sw_put,
@@ -1008,7 +1098,7 @@
SND_PCI_QUIRK(0x1043, 0x81cb, "ASUS M2N", AD1986A_3STACK),
SND_PCI_QUIRK(0x1043, 0x8234, "ASUS M2N", AD1986A_3STACK),
SND_PCI_QUIRK(0x10de, 0xcb84, "ASUS A8N-VM", AD1986A_3STACK),
- SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
+ SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba Satellite L40-10Q", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
@@ -1612,6 +1702,7 @@
HDA_BIND_VOL("Master Playback Volume", &ad1981_hp_bind_master_vol),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x05,
.name = "Master Playback Switch",
.info = ad198x_eapd_info,
.get = ad198x_eapd_get,
@@ -2136,6 +2227,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "External Amplifier",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x12,
.info = ad198x_eapd_info,
.get = ad198x_eapd_get,
.put = ad198x_eapd_put,
@@ -2257,6 +2349,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "IEC958 Playback Source",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x1b,
.info = ad1988_spdif_playback_source_info,
.get = ad1988_spdif_playback_source_get,
.put = ad1988_spdif_playback_source_put,
@@ -2372,6 +2465,12 @@
{ }
};
+static struct hda_verb ad1988_spdif_in_init_verbs[] = {
+ /* unmute SPDIF input pin */
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ { }
+};
+
/* AD1989 has no ADC -> SPDIF route */
static struct hda_verb ad1989_spdif_init_verbs[] = {
/* SPDIF-1 out pin */
@@ -2589,7 +2688,7 @@
if (! knew->name)
return -ENOMEM;
if (get_amp_nid_(val))
- knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
+ knew->subdevice = HDA_SUBDEV_AMP_FLAG;
knew->private_value = val;
return 0;
}
@@ -3107,8 +3206,11 @@
ad1988_spdif_init_verbs;
}
}
- if (spec->dig_in_nid && codec->vendor_id < 0x11d4989a)
+ if (spec->dig_in_nid && codec->vendor_id < 0x11d4989a) {
spec->mixers[spec->num_mixers++] = ad1988_spdif_in_mixers;
+ spec->init_verbs[spec->num_init_verbs++] =
+ ad1988_spdif_in_init_verbs;
+ }
codec->patch_ops = ad198x_patch_ops;
switch (board_config) {
@@ -3747,6 +3849,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = ad1884a_mobile_master_sw_put,
@@ -3775,6 +3878,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = ad1884a_mobile_master_sw_put,
@@ -4116,6 +4220,7 @@
/* HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.name = "Master Playback Switch",
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index fe0423c..7de782a 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -501,7 +501,8 @@
knew.private_value = pval;
snprintf(tmp, sizeof(tmp), "%s %s Switch", name, dir_sfx[dir]);
*kctlp = snd_ctl_new1(&knew, codec);
- return snd_hda_ctl_add(codec, get_amp_nid_(pval), *kctlp);
+ (*kctlp)->id.subdevice = HDA_SUBDEV_AMP_FLAG;
+ return snd_hda_ctl_add(codec, 0, *kctlp);
}
static int add_volume(struct hda_codec *codec, const char *name,
@@ -514,7 +515,8 @@
knew.private_value = pval;
snprintf(tmp, sizeof(tmp), "%s %s Volume", name, dir_sfx[dir]);
*kctlp = snd_ctl_new1(&knew, codec);
- return snd_hda_ctl_add(codec, get_amp_nid_(pval), *kctlp);
+ (*kctlp)->id.subdevice = HDA_SUBDEV_AMP_FLAG;
+ return snd_hda_ctl_add(codec, 0, *kctlp);
}
static void fix_volume_caps(struct hda_codec *codec, hda_nid_t dac)
@@ -751,6 +753,7 @@
spec->capture_bind[1] = make_bind_capture(codec, &snd_hda_bind_vol);
for (i = 0; i < 2; i++) {
struct snd_kcontrol *kctl;
+ int n;
if (!spec->capture_bind[i])
return -ENOMEM;
kctl = snd_ctl_new1(&cs_capture_ctls[i], codec);
@@ -760,6 +763,13 @@
err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
+ for (n = 0; n < AUTO_PIN_LAST; n++) {
+ if (!spec->adc_nid[n])
+ continue;
+ err = snd_hda_add_nid(codec, kctl, 0, spec->adc_nid[i]);
+ if (err < 0)
+ return err;
+ }
}
if (spec->num_inputs > 1 && !spec->mic_detect) {
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index a45c116..ff60908 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -315,7 +315,8 @@
static int cmi9880_build_controls(struct hda_codec *codec)
{
struct cmi_spec *spec = codec->spec;
- int err;
+ struct snd_kcontrol *kctl;
+ int i, err;
err = snd_hda_add_new_ctls(codec, cmi9880_basic_mixer);
if (err < 0)
@@ -340,6 +341,14 @@
if (err < 0)
return err;
}
+
+ /* assign Capture Source enums to NID */
+ kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+ for (i = 0; kctl && i < kctl->count; i++) {
+ err = snd_hda_add_nid(codec, kctl, i, spec->adc_nids[i]);
+ if (err < 0)
+ return err;
+ }
return 0;
}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index c578c28..194a28c 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -42,10 +42,12 @@
/* Conexant 5051 specific */
-#define CXT5051_SPDIF_OUT 0x1C
+#define CXT5051_SPDIF_OUT 0x12
#define CXT5051_PORTB_EVENT 0x38
#define CXT5051_PORTC_EVENT 0x39
+#define AUTO_MIC_PORTB (1 << 1)
+#define AUTO_MIC_PORTC (1 << 2)
struct conexant_jack {
@@ -74,7 +76,7 @@
*/
unsigned int cur_eapd;
unsigned int hp_present;
- unsigned int no_auto_mic;
+ unsigned int auto_mic;
unsigned int need_dac_fix;
/* capture */
@@ -111,8 +113,23 @@
unsigned int dell_automute;
unsigned int port_d_mode;
- unsigned char ext_mic_bias;
- unsigned int dell_vostro;
+ unsigned int dell_vostro:1;
+ unsigned int ideapad:1;
+
+ unsigned int ext_mic_present;
+ unsigned int recording;
+ void (*capture_prepare)(struct hda_codec *codec);
+ void (*capture_cleanup)(struct hda_codec *codec);
+
+ /* OLPC XO-1.5 supports DC input mode (e.g. for use with analog sensors)
+ * through the microphone jack.
+ * When the user enables this through a mixer switch, both internal and
+ * external microphones are disabled. Gain is fixed at 0dB. In this mode,
+ * we also allow the bias to be configured through a separate mixer
+ * control. */
+ unsigned int dc_enable;
+ unsigned int dc_input_bias; /* offset into cxt5066_olpc_dc_bias */
+ unsigned int mic_boost; /* offset into cxt5066_analog_mic_boost */
};
static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
@@ -185,6 +202,8 @@
struct snd_pcm_substream *substream)
{
struct conexant_spec *spec = codec->spec;
+ if (spec->capture_prepare)
+ spec->capture_prepare(codec);
snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number],
stream_tag, 0, format);
return 0;
@@ -196,6 +215,8 @@
{
struct conexant_spec *spec = codec->spec;
snd_hda_codec_cleanup_stream(codec, spec->adc_nids[substream->number]);
+ if (spec->capture_cleanup)
+ spec->capture_cleanup(codec);
return 0;
}
@@ -1585,6 +1606,11 @@
{
struct conexant_spec *spec = codec->spec;
unsigned int pinctl;
+ /* headphone pin */
+ pinctl = (spec->hp_present && spec->cur_eapd) ? PIN_HP : 0;
+ snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+ /* speaker pin */
pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
@@ -1608,7 +1634,7 @@
struct conexant_spec *spec = codec->spec;
unsigned int present;
- if (spec->no_auto_mic)
+ if (!(spec->auto_mic & AUTO_MIC_PORTB))
return;
present = snd_hda_jack_detect(codec, 0x17);
snd_hda_codec_write(codec, 0x14, 0,
@@ -1623,7 +1649,7 @@
unsigned int present;
hda_nid_t new_adc;
- if (spec->no_auto_mic)
+ if (!(spec->auto_mic & AUTO_MIC_PORTC))
return;
present = snd_hda_jack_detect(codec, 0x18);
if (present)
@@ -1669,13 +1695,7 @@
conexant_report_jack(codec, nid);
}
-static struct snd_kcontrol_new cxt5051_mixers[] = {
- HDA_CODEC_VOLUME("Internal Mic Volume", 0x14, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Switch", 0x14, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("External Mic Volume", 0x14, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("External Mic Switch", 0x14, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Docking Mic Volume", 0x15, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE("Docking Mic Switch", 0x15, 0x00, HDA_INPUT),
+static struct snd_kcontrol_new cxt5051_playback_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -1685,7 +1705,16 @@
.put = cxt5051_hp_master_sw_put,
.private_value = 0x1a,
},
+ {}
+};
+static struct snd_kcontrol_new cxt5051_capture_mixers[] = {
+ HDA_CODEC_VOLUME("Internal Mic Volume", 0x14, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Internal Mic Switch", 0x14, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("External Mic Volume", 0x14, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("External Mic Switch", 0x14, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("Docking Mic Volume", 0x15, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Docking Mic Switch", 0x15, 0x00, HDA_INPUT),
{}
};
@@ -1694,32 +1723,26 @@
HDA_CODEC_MUTE("Internal Mic Switch", 0x14, 0x00, HDA_INPUT),
HDA_CODEC_VOLUME("External Mic Volume", 0x15, 0x00, HDA_INPUT),
HDA_CODEC_MUTE("External Mic Switch", 0x15, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .info = cxt_eapd_info,
- .get = cxt_eapd_get,
- .put = cxt5051_hp_master_sw_put,
- .private_value = 0x1a,
- },
-
{}
};
static struct snd_kcontrol_new cxt5051_hp_dv6736_mixers[] = {
- HDA_CODEC_VOLUME("Mic Volume", 0x14, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Switch", 0x14, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .info = cxt_eapd_info,
- .get = cxt_eapd_get,
- .put = cxt5051_hp_master_sw_put,
- .private_value = 0x1a,
- },
+ HDA_CODEC_VOLUME("Capture Volume", 0x14, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x14, 0x00, HDA_INPUT),
+ {}
+};
+static struct snd_kcontrol_new cxt5051_f700_mixers[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x14, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x14, 0x01, HDA_INPUT),
+ {}
+};
+
+static struct snd_kcontrol_new cxt5051_toshiba_mixers[] = {
+ HDA_CODEC_VOLUME("Internal Mic Volume", 0x14, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Internal Mic Switch", 0x14, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("External Mic Volume", 0x14, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("External Mic Switch", 0x14, 0x01, HDA_INPUT),
{}
};
@@ -1748,8 +1771,6 @@
/* EAPD */
{0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
{0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
- {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTC_EVENT},
{ } /* end */
};
@@ -1775,7 +1796,6 @@
/* EAPD */
{0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
{0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
- {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT},
{ } /* end */
};
@@ -1807,17 +1827,60 @@
/* EAPD */
{0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
{0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
- {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT},
- {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTC_EVENT},
{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
{ } /* end */
};
+static struct hda_verb cxt5051_f700_init_verbs[] = {
+ /* Line in, Mic */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0},
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0},
+ /* SPK */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* HP, Amp */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Record selector: Int mic */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1) | 0x44},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x1},
+ /* SPDIF route: PCM */
+ {0x1c, AC_VERB_SET_CONNECT_SEL, 0x0},
+ /* EAPD */
+ {0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+ {0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
+ { } /* end */
+};
+
+static void cxt5051_init_mic_port(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int event)
+{
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | event);
+#ifdef CONFIG_SND_HDA_INPUT_JACK
+ conexant_add_jack(codec, nid, SND_JACK_MICROPHONE);
+ conexant_report_jack(codec, nid);
+#endif
+}
+
/* initialize jack-sensing, too */
static int cxt5051_init(struct hda_codec *codec)
{
+ struct conexant_spec *spec = codec->spec;
+
conexant_init(codec);
conexant_init_jacks(codec);
+
+ if (spec->auto_mic & AUTO_MIC_PORTB)
+ cxt5051_init_mic_port(codec, 0x17, CXT5051_PORTB_EVENT);
+ if (spec->auto_mic & AUTO_MIC_PORTC)
+ cxt5051_init_mic_port(codec, 0x18, CXT5051_PORTC_EVENT);
+
if (codec->patch_ops.unsol_event) {
cxt5051_hp_automute(codec);
cxt5051_portb_automic(codec);
@@ -1832,6 +1895,8 @@
CXT5051_HP, /* no docking */
CXT5051_HP_DV6736, /* HP without mic switch */
CXT5051_LENOVO_X200, /* Lenovo X200 laptop */
+ CXT5051_F700, /* HP Compaq Presario F700 */
+ CXT5051_TOSHIBA, /* Toshiba M300 & co */
CXT5051_MODELS
};
@@ -1840,11 +1905,15 @@
[CXT5051_HP] = "hp",
[CXT5051_HP_DV6736] = "hp-dv6736",
[CXT5051_LENOVO_X200] = "lenovo-x200",
+ [CXT5051_F700] = "hp-700",
+ [CXT5051_TOSHIBA] = "toshiba",
};
static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
+ SND_PCI_QUIRK(0x103c, 0x30ea, "Compaq Presario F700", CXT5051_F700),
+ SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba M30x", CXT5051_TOSHIBA),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
@@ -1872,8 +1941,9 @@
spec->multiout.dig_out_nid = CXT5051_SPDIF_OUT;
spec->num_adc_nids = 1; /* not 2; via auto-mic switch */
spec->adc_nids = cxt5051_adc_nids;
- spec->num_mixers = 1;
- spec->mixers[0] = cxt5051_mixers;
+ spec->num_mixers = 2;
+ spec->mixers[0] = cxt5051_capture_mixers;
+ spec->mixers[1] = cxt5051_playback_mixers;
spec->num_init_verbs = 1;
spec->init_verbs[0] = cxt5051_init_verbs;
spec->spdif_route = 0;
@@ -1887,6 +1957,7 @@
board_config = snd_hda_check_board_config(codec, CXT5051_MODELS,
cxt5051_models,
cxt5051_cfg_tbl);
+ spec->auto_mic = AUTO_MIC_PORTB | AUTO_MIC_PORTC;
switch (board_config) {
case CXT5051_HP:
spec->mixers[0] = cxt5051_hp_mixers;
@@ -1894,11 +1965,20 @@
case CXT5051_HP_DV6736:
spec->init_verbs[0] = cxt5051_hp_dv6736_init_verbs;
spec->mixers[0] = cxt5051_hp_dv6736_mixers;
- spec->no_auto_mic = 1;
+ spec->auto_mic = 0;
break;
case CXT5051_LENOVO_X200:
spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs;
break;
+ case CXT5051_F700:
+ spec->init_verbs[0] = cxt5051_f700_init_verbs;
+ spec->mixers[0] = cxt5051_f700_mixers;
+ spec->auto_mic = 0;
+ break;
+ case CXT5051_TOSHIBA:
+ spec->mixers[0] = cxt5051_toshiba_mixers;
+ spec->auto_mic = AUTO_MIC_PORTB;
+ break;
}
return 0;
@@ -1966,53 +2046,97 @@
return 1;
}
-/* toggle input of built-in and mic jack appropriately */
-static void cxt5066_automic(struct hda_codec *codec)
+static const struct hda_input_mux cxt5066_olpc_dc_bias = {
+ .num_items = 3,
+ .items = {
+ { "Off", PIN_IN },
+ { "50%", PIN_VREF50 },
+ { "80%", PIN_VREF80 },
+ },
+};
+
+static int cxt5066_set_olpc_dc_bias(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
- struct hda_verb ext_mic_present[] = {
- /* enable external mic, port B */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias},
+ /* Even though port F is the DC input, the bias is controlled on port B.
+ * we also leave that port as an active input (but unselected) in DC mode
+ * just in case that is necessary to make the bias setting take effect. */
+ return snd_hda_codec_write_cache(codec, 0x1a, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ cxt5066_olpc_dc_bias.items[spec->dc_input_bias].index);
+}
- /* switch to external mic input */
- {0x17, AC_VERB_SET_CONNECT_SEL, 0},
+/* OLPC defers mic widget control until when capture is started because the
+ * microphone LED comes on as soon as these settings are put in place. if we
+ * did this before recording, it would give the false indication that recording
+ * is happening when it is not. */
+static void cxt5066_olpc_select_mic(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ if (!spec->recording)
+ return;
- /* disable internal mic, port C */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {}
- };
- static struct hda_verb ext_mic_absent[] = {
- /* enable internal mic, port C */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ if (spec->dc_enable) {
+ /* in DC mode we ignore presence detection and just use the jack
+ * through our special DC port */
+ const struct hda_verb enable_dc_mode[] = {
+ /* disble internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- /* switch to internal mic input */
- {0x17, AC_VERB_SET_CONNECT_SEL, 1},
+ /* enable DC capture, port F */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {},
+ };
- /* disable external mic, port B */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {}
- };
+ snd_hda_sequence_write(codec, enable_dc_mode);
+ /* port B input disabled (and bias set) through the following call */
+ cxt5066_set_olpc_dc_bias(codec);
+ return;
+ }
+
+ /* disable DC (port F) */
+ snd_hda_codec_write(codec, 0x1e, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
+
+ /* external mic, port B */
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ spec->ext_mic_present ? CXT5066_OLPC_EXT_MIC_BIAS : 0);
+
+ /* internal mic, port C */
+ snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ spec->ext_mic_present ? 0 : PIN_VREF80);
+}
+
+/* toggle input of built-in and mic jack appropriately */
+static void cxt5066_olpc_automic(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
unsigned int present;
- present = snd_hda_jack_detect(codec, 0x1a);
- if (present) {
+ if (spec->dc_enable) /* don't do presence detection in DC mode */
+ return;
+
+ present = snd_hda_codec_read(codec, 0x1a, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ if (present)
snd_printdd("CXT5066: external microphone detected\n");
- snd_hda_sequence_write(codec, ext_mic_present);
- } else {
+ else
snd_printdd("CXT5066: external microphone absent\n");
- snd_hda_sequence_write(codec, ext_mic_absent);
- }
+
+ snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_CONNECT_SEL,
+ present ? 0 : 1);
+ spec->ext_mic_present = !!present;
+
+ cxt5066_olpc_select_mic(codec);
}
/* toggle input of built-in digital mic and mic jack appropriately */
static void cxt5066_vostro_automic(struct hda_codec *codec)
{
- struct conexant_spec *spec = codec->spec;
unsigned int present;
struct hda_verb ext_mic_present[] = {
/* enable external mic, port B */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
/* switch to external mic input */
{0x17, AC_VERB_SET_CONNECT_SEL, 0},
@@ -2044,6 +2168,34 @@
}
}
+/* toggle input of built-in digital mic and mic jack appropriately */
+static void cxt5066_ideapad_automic(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ struct hda_verb ext_mic_present[] = {
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+ static struct hda_verb ext_mic_absent[] = {
+ {0x14, AC_VERB_SET_CONNECT_SEL, 2},
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+
+ present = snd_hda_jack_detect(codec, 0x1b);
+ if (present) {
+ snd_printdd("CXT5066: external microphone detected\n");
+ snd_hda_sequence_write(codec, ext_mic_present);
+ } else {
+ snd_printdd("CXT5066: external microphone absent\n");
+ snd_hda_sequence_write(codec, ext_mic_absent);
+ }
+}
+
/* mute internal speaker if HP is plugged */
static void cxt5066_hp_automute(struct hda_codec *codec)
{
@@ -2063,15 +2215,18 @@
}
/* unsolicited event for jack sensing */
-static void cxt5066_unsol_event(struct hda_codec *codec, unsigned int res)
+static void cxt5066_olpc_unsol_event(struct hda_codec *codec, unsigned int res)
{
+ struct conexant_spec *spec = codec->spec;
snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26);
switch (res >> 26) {
case CONEXANT_HP_EVENT:
cxt5066_hp_automute(codec);
break;
case CONEXANT_MIC_EVENT:
- cxt5066_automic(codec);
+ /* ignore mic events in DC mode; we're always using the jack */
+ if (!spec->dc_enable)
+ cxt5066_olpc_automic(codec);
break;
}
}
@@ -2090,6 +2245,20 @@
}
}
+/* unsolicited event for jack sensing */
+static void cxt5066_ideapad_event(struct hda_codec *codec, unsigned int res)
+{
+ snd_printdd("CXT5066_ideapad: unsol event %x (%x)\n", res, res >> 26);
+ switch (res >> 26) {
+ case CONEXANT_HP_EVENT:
+ cxt5066_hp_automute(codec);
+ break;
+ case CONEXANT_MIC_EVENT:
+ cxt5066_ideapad_automic(codec);
+ break;
+ }
+}
+
static const struct hda_input_mux cxt5066_analog_mic_boost = {
.num_items = 5,
.items = {
@@ -2101,6 +2270,23 @@
},
};
+static void cxt5066_set_mic_boost(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ snd_hda_codec_write_cache(codec, 0x17, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_OUTPUT |
+ cxt5066_analog_mic_boost.items[spec->mic_boost].index);
+ if (spec->ideapad) {
+ /* adjust the internal mic as well...it is not through 0x17 */
+ snd_hda_codec_write_cache(codec, 0x23, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_INPUT |
+ cxt5066_analog_mic_boost.
+ items[spec->mic_boost].index);
+ }
+}
+
static int cxt5066_mic_boost_mux_enum_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
@@ -2111,15 +2297,8 @@
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- int val;
- hda_nid_t nid = kcontrol->private_value & 0xff;
- int inout = (kcontrol->private_value & 0x100) ?
- AC_AMP_GET_INPUT : AC_AMP_GET_OUTPUT;
-
- val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_AMP_GAIN_MUTE, inout);
-
- ucontrol->value.enumerated.item[0] = val & AC_AMP_GAIN;
+ struct conexant_spec *spec = codec->spec;
+ ucontrol->value.enumerated.item[0] = spec->mic_boost;
return 0;
}
@@ -2127,26 +2306,132 @@
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct conexant_spec *spec = codec->spec;
const struct hda_input_mux *imux = &cxt5066_analog_mic_boost;
unsigned int idx;
- hda_nid_t nid = kcontrol->private_value & 0xff;
- int inout = (kcontrol->private_value & 0x100) ?
- AC_AMP_SET_INPUT : AC_AMP_SET_OUTPUT;
-
- if (!imux->num_items)
- return 0;
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | inout |
- imux->items[idx].index);
+ spec->mic_boost = idx;
+ if (!spec->dc_enable)
+ cxt5066_set_mic_boost(codec);
+ return 1;
+}
+
+static void cxt5066_enable_dc(struct hda_codec *codec)
+{
+ const struct hda_verb enable_dc_mode[] = {
+ /* disable gain */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* switch to DC input */
+ {0x17, AC_VERB_SET_CONNECT_SEL, 3},
+ {}
+ };
+
+ /* configure as input source */
+ snd_hda_sequence_write(codec, enable_dc_mode);
+ cxt5066_olpc_select_mic(codec); /* also sets configured bias */
+}
+
+static void cxt5066_disable_dc(struct hda_codec *codec)
+{
+ /* reconfigure input source */
+ cxt5066_set_mic_boost(codec);
+ /* automic also selects the right mic if we're recording */
+ cxt5066_olpc_automic(codec);
+}
+
+static int cxt5066_olpc_dc_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct conexant_spec *spec = codec->spec;
+ ucontrol->value.integer.value[0] = spec->dc_enable;
+ return 0;
+}
+
+static int cxt5066_olpc_dc_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct conexant_spec *spec = codec->spec;
+ int dc_enable = !!ucontrol->value.integer.value[0];
+
+ if (dc_enable == spec->dc_enable)
+ return 0;
+
+ spec->dc_enable = dc_enable;
+ if (dc_enable)
+ cxt5066_enable_dc(codec);
+ else
+ cxt5066_disable_dc(codec);
return 1;
}
+static int cxt5066_olpc_dc_bias_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ return snd_hda_input_mux_info(&cxt5066_olpc_dc_bias, uinfo);
+}
+
+static int cxt5066_olpc_dc_bias_enum_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct conexant_spec *spec = codec->spec;
+ ucontrol->value.enumerated.item[0] = spec->dc_input_bias;
+ return 0;
+}
+
+static int cxt5066_olpc_dc_bias_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct conexant_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = &cxt5066_analog_mic_boost;
+ unsigned int idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+
+ spec->dc_input_bias = idx;
+ if (spec->dc_enable)
+ cxt5066_set_olpc_dc_bias(codec);
+ return 1;
+}
+
+static void cxt5066_olpc_capture_prepare(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ /* mark as recording and configure the microphone widget so that the
+ * recording LED comes on. */
+ spec->recording = 1;
+ cxt5066_olpc_select_mic(codec);
+}
+
+static void cxt5066_olpc_capture_cleanup(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ const struct hda_verb disable_mics[] = {
+ /* disable external mic, port B */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* disble internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* disable DC capture, port F */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {},
+ };
+
+ snd_hda_sequence_write(codec, disable_mics);
+ spec->recording = 0;
+}
+
static struct hda_input_mux cxt5066_capture_source = {
.num_items = 4,
.items = {
@@ -2187,6 +2472,7 @@
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK,
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_volume_info,
.get = snd_hda_mixer_amp_volume_get,
.put = snd_hda_mixer_amp_volume_put,
@@ -2198,6 +2484,24 @@
{}
};
+static struct snd_kcontrol_new cxt5066_mixer_olpc_dc[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DC Mode Enable Switch",
+ .info = snd_ctl_boolean_mono_info,
+ .get = cxt5066_olpc_dc_get,
+ .put = cxt5066_olpc_dc_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DC Input Bias Enum",
+ .info = cxt5066_olpc_dc_bias_enum_info,
+ .get = cxt5066_olpc_dc_bias_enum_get,
+ .put = cxt5066_olpc_dc_bias_enum_put,
+ },
+ {}
+};
+
static struct snd_kcontrol_new cxt5066_mixers[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -2210,11 +2514,10 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Ext Mic Boost Capture Enum",
+ .name = "Analog Mic Boost Capture Enum",
.info = cxt5066_mic_boost_mux_enum_info,
.get = cxt5066_mic_boost_mux_enum_get,
.put = cxt5066_mic_boost_mux_enum_put,
- .private_value = 0x17,
},
HDA_BIND_VOL("Capture Volume", &cxt5066_bind_capture_vol_others),
@@ -2296,10 +2599,10 @@
{0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
/* Port B: external microphone */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
/* Port C: internal microphone */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
/* Port D: unused */
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
@@ -2308,7 +2611,7 @@
{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
{0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
- /* Port F: unused */
+ /* Port F: external DC input through microphone port */
{0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
/* Port G: internal speakers */
@@ -2412,6 +2715,56 @@
{ } /* end */
};
+static struct hda_verb cxt5066_init_verbs_ideapad[] = {
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port B */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port C */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port F */
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port E */
+
+ /* Speakers */
+ {0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* HP, Amp */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1c, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Node 14 connections: 0x17 0x18 0x23 0x24 0x27 */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 2}, /* default to internal mic */
+
+ /* Audio input selector */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x2},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 1}, /* route ext mic */
+
+ /* SPDIF route: PCM */
+ {0x20, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x0},
+
+ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* internal microphone */
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* enable int mic */
+
+ /* EAPD */
+ {0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+ {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+ { } /* end */
+};
+
static struct hda_verb cxt5066_init_verbs_portd_lo[] = {
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{ } /* end */
@@ -2428,8 +2781,24 @@
cxt5066_hp_automute(codec);
if (spec->dell_vostro)
cxt5066_vostro_automic(codec);
- else
- cxt5066_automic(codec);
+ else if (spec->ideapad)
+ cxt5066_ideapad_automic(codec);
+ }
+ cxt5066_set_mic_boost(codec);
+ return 0;
+}
+
+static int cxt5066_olpc_init(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ snd_printdd("CXT5066: init\n");
+ conexant_init(codec);
+ cxt5066_hp_automute(codec);
+ if (!spec->dc_enable) {
+ cxt5066_set_mic_boost(codec);
+ cxt5066_olpc_automic(codec);
+ } else {
+ cxt5066_enable_dc(codec);
}
return 0;
}
@@ -2439,6 +2808,7 @@
CXT5066_DELL_LAPTOP, /* Dell Laptop */
CXT5066_OLPC_XO_1_5, /* OLPC XO 1.5 */
CXT5066_DELL_VOSTO, /* Dell Vostro 1015i */
+ CXT5066_IDEAPAD, /* Lenovo IdeaPad U150 */
CXT5066_MODELS
};
@@ -2446,7 +2816,8 @@
[CXT5066_LAPTOP] = "laptop",
[CXT5066_DELL_LAPTOP] = "dell-laptop",
[CXT5066_OLPC_XO_1_5] = "olpc-xo-1_5",
- [CXT5066_DELL_VOSTO] = "dell-vostro"
+ [CXT5066_DELL_VOSTO] = "dell-vostro",
+ [CXT5066_IDEAPAD] = "ideapad",
};
static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
@@ -2456,6 +2827,7 @@
CXT5066_DELL_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
+ SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD),
{}
};
@@ -2470,7 +2842,7 @@
codec->spec = spec;
codec->patch_ops = conexant_patch_ops;
- codec->patch_ops.init = cxt5066_init;
+ codec->patch_ops.init = conexant_init;
spec->dell_automute = 0;
spec->multiout.max_channels = 2;
@@ -2483,7 +2855,6 @@
spec->input_mux = &cxt5066_capture_source;
spec->port_d_mode = PIN_HP;
- spec->ext_mic_bias = PIN_VREF80;
spec->num_init_verbs = 1;
spec->init_verbs[0] = cxt5066_init_verbs;
@@ -2510,20 +2881,28 @@
spec->dell_automute = 1;
break;
case CXT5066_OLPC_XO_1_5:
- codec->patch_ops.unsol_event = cxt5066_unsol_event;
+ codec->patch_ops.init = cxt5066_olpc_init;
+ codec->patch_ops.unsol_event = cxt5066_olpc_unsol_event;
spec->init_verbs[0] = cxt5066_init_verbs_olpc;
spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_olpc_dc;
spec->mixers[spec->num_mixers++] = cxt5066_mixers;
spec->port_d_mode = 0;
- spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS;
+ spec->mic_boost = 3; /* default 30dB gain */
/* no S/PDIF out */
spec->multiout.dig_out_nid = 0;
/* input source automatically selected */
spec->input_mux = NULL;
+
+ /* our capture hooks which allow us to turn on the microphone LED
+ * at the right time */
+ spec->capture_prepare = cxt5066_olpc_capture_prepare;
+ spec->capture_cleanup = cxt5066_olpc_capture_cleanup;
break;
case CXT5066_DELL_VOSTO:
+ codec->patch_ops.init = cxt5066_init;
codec->patch_ops.unsol_event = cxt5066_vostro_event;
spec->init_verbs[0] = cxt5066_init_verbs_vostro;
spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
@@ -2531,6 +2910,7 @@
spec->mixers[spec->num_mixers++] = cxt5066_vostro_mixers;
spec->port_d_mode = 0;
spec->dell_vostro = 1;
+ spec->mic_boost = 3; /* default 30dB gain */
snd_hda_attach_beep_device(codec, 0x13);
/* no S/PDIF out */
@@ -2539,6 +2919,22 @@
/* input source automatically selected */
spec->input_mux = NULL;
break;
+ case CXT5066_IDEAPAD:
+ codec->patch_ops.init = cxt5066_init;
+ codec->patch_ops.unsol_event = cxt5066_ideapad_event;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+ spec->init_verbs[0] = cxt5066_init_verbs_ideapad;
+ spec->port_d_mode = 0;
+ spec->ideapad = 1;
+ spec->mic_boost = 2; /* default 20dB gain */
+
+ /* no S/PDIF out */
+ spec->multiout.dig_out_nid = 0;
+
+ /* input source automatically selected */
+ spec->input_mux = NULL;
+ break;
}
return 0;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index da34095..e8cbe21 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -131,8 +131,10 @@
enum {
ALC269_BASIC,
ALC269_QUANTA_FL1,
- ALC269_ASUS_AMIC,
- ALC269_ASUS_DMIC,
+ ALC269_AMIC,
+ ALC269_DMIC,
+ ALC269VB_AMIC,
+ ALC269VB_DMIC,
ALC269_FUJITSU,
ALC269_LIFEBOOK,
ALC269_AUTO,
@@ -207,8 +209,10 @@
ALC882_ASUS_A7J,
ALC882_ASUS_A7M,
ALC885_MACPRO,
+ ALC885_MBA21,
ALC885_MBP3,
ALC885_MB5,
+ ALC885_MACMINI3,
ALC885_IMAC24,
ALC885_IMAC91,
ALC883_3ST_2ch_DIG,
@@ -338,7 +342,7 @@
void (*init_hook)(struct hda_codec *codec);
void (*unsol_event)(struct hda_codec *codec, unsigned int res);
#ifdef CONFIG_SND_HDA_POWER_SAVE
- void (*power_hook)(struct hda_codec *codec, int power);
+ void (*power_hook)(struct hda_codec *codec);
#endif
/* for pin sensing */
@@ -391,7 +395,7 @@
void (*init_hook)(struct hda_codec *);
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_amp_list *loopbacks;
- void (*power_hook)(struct hda_codec *codec, int power);
+ void (*power_hook)(struct hda_codec *codec);
#endif
};
@@ -633,6 +637,7 @@
#define ALC_PIN_MODE(xname, nid, dir) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_pin_mode_info, \
.get = alc_pin_mode_get, \
.put = alc_pin_mode_put, \
@@ -684,6 +689,7 @@
}
#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_gpio_data_info, \
.get = alc_gpio_data_get, \
.put = alc_gpio_data_put, \
@@ -738,6 +744,7 @@
}
#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_spdif_ctrl_info, \
.get = alc_spdif_ctrl_get, \
.put = alc_spdif_ctrl_put, \
@@ -791,6 +798,7 @@
#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_eapd_ctrl_info, \
.get = alc_eapd_ctrl_get, \
.put = alc_eapd_ctrl_put, \
@@ -837,27 +845,6 @@
spec->init_verbs[spec->num_init_verbs++] = verb;
}
-#ifdef CONFIG_PROC_FS
-/*
- * hook for proc
- */
-static void print_realtek_coef(struct snd_info_buffer *buffer,
- struct hda_codec *codec, hda_nid_t nid)
-{
- int coeff;
-
- if (nid != 0x20)
- return;
- coeff = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PROC_COEF, 0);
- snd_iprintf(buffer, " Processing Coefficient: 0x%02x\n", coeff);
- coeff = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_COEF_INDEX, 0);
- snd_iprintf(buffer, " Coefficient Index: 0x%02x\n", coeff);
-}
-#else
-#define print_realtek_coef NULL
-#endif
-
/*
* set up from the preset table
*/
@@ -1162,6 +1149,7 @@
case 0x10ec0888:
alc888_coef_init(codec);
break;
+#if 0 /* XXX: This may cause the silent output on speaker on some machines */
case 0x10ec0267:
case 0x10ec0268:
snd_hda_codec_write(codec, 0x20, 0,
@@ -1174,6 +1162,7 @@
AC_VERB_SET_PROC_COEF,
tmp | 0x3000);
break;
+#endif /* XXX */
}
break;
}
@@ -1265,7 +1254,7 @@
*/
static int alc_subsystem_id(struct hda_codec *codec,
hda_nid_t porta, hda_nid_t porte,
- hda_nid_t portd)
+ hda_nid_t portd, hda_nid_t porti)
{
unsigned int ass, tmp, i;
unsigned nid;
@@ -1291,7 +1280,7 @@
snd_printd("realtek: No valid SSID, "
"checking pincfg 0x%08x for NID 0x%x\n",
ass, nid);
- if (!(ass & 1) && !(ass & 0x100000))
+ if (!(ass & 1))
return 0;
if ((ass >> 30) != 1) /* no physical connection */
return 0;
@@ -1351,6 +1340,8 @@
nid = porte;
else if (tmp == 2)
nid = portd;
+ else if (tmp == 3)
+ nid = porti;
else
return 1;
for (i = 0; i < spec->autocfg.line_outs; i++)
@@ -1365,9 +1356,10 @@
}
static void alc_ssid_check(struct hda_codec *codec,
- hda_nid_t porta, hda_nid_t porte, hda_nid_t portd)
+ hda_nid_t porta, hda_nid_t porte,
+ hda_nid_t portd, hda_nid_t porti)
{
- if (!alc_subsystem_id(codec, porta, porte, portd)) {
+ if (!alc_subsystem_id(codec, porta, porte, portd, porti)) {
struct alc_spec *spec = codec->spec;
snd_printd("realtek: "
"Enable default setup for auto mode as fallback\n");
@@ -1840,14 +1832,6 @@
spec->autocfg.speaker_pins[2] = 0x1b;
}
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-static void alc889_power_eapd(struct hda_codec *codec, int power)
-{
- set_eapd(codec, 0x14, power);
- set_eapd(codec, 0x15, power);
-}
-#endif
-
/*
* ALC880 3-stack model
*
@@ -2450,6 +2434,15 @@
* build control elements
*/
+#define NID_MAPPING (-1)
+
+#define SUBDEV_SPEAKER_ (0 << 6)
+#define SUBDEV_HP_ (1 << 6)
+#define SUBDEV_LINE_ (2 << 6)
+#define SUBDEV_SPEAKER(x) (SUBDEV_SPEAKER_ | ((x) & 0x3f))
+#define SUBDEV_HP(x) (SUBDEV_HP_ | ((x) & 0x3f))
+#define SUBDEV_LINE(x) (SUBDEV_LINE_ | ((x) & 0x3f))
+
static void alc_free_kctls(struct hda_codec *codec);
#ifdef CONFIG_SND_HDA_INPUT_BEEP
@@ -2464,8 +2457,11 @@
static int alc_build_controls(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- int err;
- int i;
+ struct snd_kcontrol *kctl;
+ struct snd_kcontrol_new *knew;
+ int i, j, err;
+ unsigned int u;
+ hda_nid_t nid;
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
@@ -2506,8 +2502,7 @@
if (!kctl)
return -ENOMEM;
kctl->private_value = spec->beep_amp;
- err = snd_hda_ctl_add(codec,
- get_amp_nid_(spec->beep_amp), kctl);
+ err = snd_hda_ctl_add(codec, 0, kctl);
if (err < 0)
return err;
}
@@ -2534,6 +2529,75 @@
}
alc_free_kctls(codec); /* no longer needed */
+
+ /* assign Capture Source enums to NID */
+ kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+ if (!kctl)
+ kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+ for (i = 0; kctl && i < kctl->count; i++) {
+ hda_nid_t *nids = spec->capsrc_nids;
+ if (!nids)
+ nids = spec->adc_nids;
+ err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+ if (err < 0)
+ return err;
+ }
+ if (spec->cap_mixer) {
+ const char *kname = kctl ? kctl->id.name : NULL;
+ for (knew = spec->cap_mixer; knew->name; knew++) {
+ if (kname && strcmp(knew->name, kname) == 0)
+ continue;
+ kctl = snd_hda_find_mixer_ctl(codec, knew->name);
+ for (i = 0; kctl && i < kctl->count; i++) {
+ err = snd_hda_add_nid(codec, kctl, i,
+ spec->adc_nids[i]);
+ if (err < 0)
+ return err;
+ }
+ }
+ }
+
+ /* other nid->control mapping */
+ for (i = 0; i < spec->num_mixers; i++) {
+ for (knew = spec->mixers[i]; knew->name; knew++) {
+ if (knew->iface != NID_MAPPING)
+ continue;
+ kctl = snd_hda_find_mixer_ctl(codec, knew->name);
+ if (kctl == NULL)
+ continue;
+ u = knew->subdevice;
+ for (j = 0; j < 4; j++, u >>= 8) {
+ nid = u & 0x3f;
+ if (nid == 0)
+ continue;
+ switch (u & 0xc0) {
+ case SUBDEV_SPEAKER_:
+ nid = spec->autocfg.speaker_pins[nid];
+ break;
+ case SUBDEV_LINE_:
+ nid = spec->autocfg.line_out_pins[nid];
+ break;
+ case SUBDEV_HP_:
+ nid = spec->autocfg.hp_pins[nid];
+ break;
+ default:
+ continue;
+ }
+ err = snd_hda_add_nid(codec, kctl, 0, nid);
+ if (err < 0)
+ return err;
+ }
+ u = knew->private_value;
+ for (j = 0; j < 4; j++, u >>= 8) {
+ nid = u & 0xff;
+ if (nid == 0)
+ continue;
+ err = snd_hda_add_nid(codec, kctl, 0, nid);
+ if (err < 0)
+ return err;
+ }
+ }
+ }
return 0;
}
@@ -3616,6 +3680,11 @@
return 0;
}
+static inline void alc_shutup(struct hda_codec *codec)
+{
+ snd_hda_shutup_pins(codec);
+}
+
static void alc_free_kctls(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -3636,17 +3705,44 @@
if (!spec)
return;
+ alc_shutup(codec);
alc_free_kctls(codec);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
+static void alc_power_eapd(struct hda_codec *codec)
+{
+ /* We currently only handle front, HP */
+ switch (codec->vendor_id) {
+ case 0x10ec0260:
+ set_eapd(codec, 0x0f, 0);
+ set_eapd(codec, 0x10, 0);
+ break;
+ case 0x10ec0262:
+ case 0x10ec0267:
+ case 0x10ec0268:
+ case 0x10ec0269:
+ case 0x10ec0270:
+ case 0x10ec0272:
+ case 0x10ec0660:
+ case 0x10ec0662:
+ case 0x10ec0663:
+ case 0x10ec0862:
+ case 0x10ec0889:
+ set_eapd(codec, 0x14, 0);
+ set_eapd(codec, 0x15, 0);
+ break;
+ }
+}
+
static int alc_suspend(struct hda_codec *codec, pm_message_t state)
{
struct alc_spec *spec = codec->spec;
+ alc_shutup(codec);
if (spec && spec->power_hook)
- spec->power_hook(codec, 0);
+ spec->power_hook(codec);
return 0;
}
#endif
@@ -3654,16 +3750,9 @@
#ifdef SND_HDA_NEEDS_RESUME
static int alc_resume(struct hda_codec *codec)
{
-#ifdef CONFIG_SND_HDA_POWER_SAVE
- struct alc_spec *spec = codec->spec;
-#endif
codec->patch_ops.init(codec);
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
-#ifdef CONFIG_SND_HDA_POWER_SAVE
- if (spec && spec->power_hook)
- spec->power_hook(codec, 1);
-#endif
return 0;
}
#endif
@@ -3683,6 +3772,7 @@
.suspend = alc_suspend,
.check_power_status = alc_check_power_status,
#endif
+ .reboot_notify = alc_shutup,
};
@@ -3839,6 +3929,7 @@
#define PIN_CTL_TEST(xname,nid) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_test_pin_ctl_info, \
.get = alc_test_pin_ctl_get, \
.put = alc_test_pin_ctl_put, \
@@ -3848,6 +3939,7 @@
#define PIN_SRC_TEST(xname,nid) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
.info = alc_test_pin_src_info, \
.get = alc_test_pin_src_get, \
.put = alc_test_pin_src_put, \
@@ -4387,7 +4479,7 @@
if (!knew->name)
return -ENOMEM;
if (get_amp_nid_(val))
- knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
+ knew->subdevice = HDA_SUBDEV_AMP_FLAG;
knew->private_value = val;
return 0;
}
@@ -4770,7 +4862,7 @@
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux[0];
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
return 1;
}
@@ -4974,7 +5066,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc880_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -5182,6 +5273,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
.info = snd_ctl_boolean_mono_info,
.get = alc260_hp_master_sw_get,
.put = alc260_hp_master_sw_put,
@@ -5220,6 +5312,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x11,
.info = snd_ctl_boolean_mono_info,
.get = alc260_hp_master_sw_get,
.put = alc260_hp_master_sw_put,
@@ -6303,7 +6396,7 @@
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux[0];
- alc_ssid_check(codec, 0x10, 0x15, 0x0f);
+ alc_ssid_check(codec, 0x10, 0x15, 0x0f, 0);
return 1;
}
@@ -6582,7 +6675,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc260_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -6664,6 +6756,14 @@
},
};
+static struct hda_input_mux macmini3_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
static struct hda_input_mux alc883_3stack_6ch_intel = {
.num_items = 4,
.items = {
@@ -6852,6 +6952,13 @@
{ 8, alc882_sixstack_ch8_init },
};
+
+/* Macbook Air 2,1 */
+
+static struct hda_channel_mode alc885_mba21_ch_modes[1] = {
+ { 2, NULL },
+};
+
/*
* macbook pro ALC885 can switch LineIn to LineOut without losing Mic
*/
@@ -6912,6 +7019,7 @@
{ 6, alc885_mb5_ch6_init },
};
+#define alc885_macmini3_6ch_modes alc885_mb5_6ch_modes
/*
* 2ch mode
@@ -7123,6 +7231,15 @@
{ } /* end */
};
+/* Macbook Air 2,1 same control for HP and internal Speaker */
+
+static struct snd_kcontrol_new alc885_mba21_mixer[] = {
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_OUTPUT),
+ { }
+};
+
+
static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
@@ -7156,6 +7273,21 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc885_macmini3_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
+ HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc885_imac91_mixer[] = {
HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("Line-Out Playback Switch", 0x0c, 0x02, HDA_INPUT),
@@ -7247,29 +7379,18 @@
static struct hda_verb alc882_base_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* CLFE mixer */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Side mixer */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* mute analog input loopbacks */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -7306,14 +7427,8 @@
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* Input mixer3 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* ADC2: mute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -7357,26 +7472,17 @@
static struct hda_verb alc885_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* CLFE mixer */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Side mixer */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* mute analog input loopbacks */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Front HP Pin: output 0 (0x0c) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
@@ -7410,17 +7516,11 @@
/* Mixer elements: 0x18, , 0x1a, 0x1b */
/* Input mixer1 */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
/* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* ADC2: mute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
/* ADC3: mute amp left and right */
@@ -7562,6 +7662,76 @@
{ }
};
+/* Macmini 3,1 */
+static struct hda_verb alc885_macmini3_init_verbs[] = {
+ /* DACs */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Front mixer */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Surround mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* LFE mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP mixer */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Front Pin (0x0c) */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* LFE Pin (0x0e) */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* HP Pin (0x0f) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ /* Line In pin */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ { }
+};
+
+
+static struct hda_verb alc885_mba21_init_verbs[] = {
+ /*Internal and HP Speaker Mixer*/
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /*Internal Speaker Pin (0x0c)*/
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* HP Pin: output 0 (0x0e) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC880_HP_EVENT | AC_USRSP_EN)},
+ /* Line in (is hp when jack connected)*/
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ { }
+ };
+
+
/* Macbook Pro rev3 */
static struct hda_verb alc885_mbp3_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
@@ -7724,6 +7894,20 @@
spec->autocfg.speaker_pins[1] = 0x1a;
}
+#define alc885_mb5_setup alc885_imac24_setup
+#define alc885_macmini3_setup alc885_imac24_setup
+
+/* Macbook Air 2,1 */
+static void alc885_mba21_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[0] = 0x18;
+}
+
+
+
static void alc885_mbp3_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -7732,46 +7916,13 @@
spec->autocfg.speaker_pins[0] = 0x14;
}
-static void alc885_mb5_automute(struct hda_codec *codec)
+static void alc885_imac91_setup(struct hda_codec *codec)
{
- unsigned int present;
+ struct alc_spec *spec = codec->spec;
- present = snd_hda_codec_read(codec, 0x14, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
- snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-
-}
-
-static void alc885_mb5_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- /* Headphone insertion or removal. */
- if ((res >> 26) == ALC880_HP_EVENT)
- alc885_mb5_automute(codec);
-}
-
-static void alc885_imac91_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x14, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
- snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-
-}
-
-static void alc885_imac91_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- /* Headphone insertion or removal. */
- if ((res >> 26) == ALC880_HP_EVENT)
- alc885_imac91_automute(codec);
+ spec->autocfg.hp_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[1] = 0x1a;
}
static struct hda_verb alc882_targa_verbs[] = {
@@ -7906,18 +8057,6 @@
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
/*
* Set up output mixers (0x0c - 0x0f)
*/
@@ -7942,16 +8081,9 @@
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
-
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ }
};
@@ -8938,6 +9070,8 @@
[ALC882_ASUS_A7M] = "asus-a7m",
[ALC885_MACPRO] = "macpro",
[ALC885_MB5] = "mb5",
+ [ALC885_MACMINI3] = "macmini3",
+ [ALC885_MBA21] = "mba21",
[ALC885_MBP3] = "mbp3",
[ALC885_IMAC24] = "imac24",
[ALC885_IMAC91] = "imac91",
@@ -9121,6 +9255,7 @@
*/
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5),
+ SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC885_MACMINI3),
{} /* terminator */
};
@@ -9172,6 +9307,18 @@
.input_mux = &alc882_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
},
+ [ALC885_MBA21] = {
+ .mixers = { alc885_mba21_mixer },
+ .init_verbs = { alc885_mba21_init_verbs, alc880_gpio1_init_verbs },
+ .num_dacs = 2,
+ .dac_nids = alc882_dac_nids,
+ .channel_mode = alc885_mba21_ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes),
+ .input_mux = &alc882_capture_source,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_mba21_setup,
+ .init_hook = alc_automute_amp,
+ },
[ALC885_MBP3] = {
.mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
.init_verbs = { alc885_mbp3_init_verbs,
@@ -9199,8 +9346,24 @@
.input_mux = &mb5_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
- .unsol_event = alc885_mb5_unsol_event,
- .init_hook = alc885_mb5_automute,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_mb5_setup,
+ .init_hook = alc_automute_amp,
+ },
+ [ALC885_MACMINI3] = {
+ .mixers = { alc885_macmini3_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_macmini3_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .channel_mode = alc885_macmini3_6ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_macmini3_6ch_modes),
+ .input_mux = &macmini3_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_macmini3_setup,
+ .init_hook = alc_automute_amp,
},
[ALC885_MACPRO] = {
.mixers = { alc882_macpro_mixer },
@@ -9239,8 +9402,9 @@
.input_mux = &alc882_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
- .unsol_event = alc885_imac91_unsol_event,
- .init_hook = alc885_imac91_automute,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_imac91_setup,
+ .init_hook = alc_automute_amp,
},
[ALC882_TARGA] = {
.mixers = { alc882_targa_mixer, alc882_chmode_mixer },
@@ -9528,7 +9692,7 @@
.setup = alc889_acer_aspire_8930g_setup,
.init_hook = alc_automute_amp,
#ifdef CONFIG_SND_HDA_POWER_SAVE
- .power_hook = alc889_power_eapd,
+ .power_hook = alc_power_eapd,
#endif
},
[ALC888_ACER_ASPIRE_7730G] = {
@@ -10063,7 +10227,7 @@
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux[0];
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
err = alc_auto_add_mic_boost(codec);
if (err < 0)
@@ -10201,7 +10365,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc882_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -10324,8 +10487,14 @@
.info = snd_ctl_boolean_mono_info, \
.get = alc262_hp_master_sw_get, \
.put = alc262_hp_master_sw_put, \
+ }, \
+ { \
+ .iface = NID_MAPPING, \
+ .name = "Master Playback Switch", \
+ .private_value = 0x15 | (0x16 << 8) | (0x1b << 16), \
}
+
static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = {
ALC262_HP_MASTER_SWITCH,
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -10483,6 +10652,12 @@
.info = snd_ctl_boolean_mono_info, \
.get = alc262_hippo_master_sw_get, \
.put = alc262_hippo_master_sw_put, \
+ }, \
+ { \
+ .iface = NID_MAPPING, \
+ .name = "Master Playback Switch", \
+ .subdevice = SUBDEV_HP(0) | (SUBDEV_LINE(0) << 8) | \
+ (SUBDEV_SPEAKER(0) << 16), \
}
static struct snd_kcontrol_new alc262_hippo_mixer[] = {
@@ -10963,11 +11138,17 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc262_fujitsu_master_sw_put,
.private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
},
+ {
+ .iface = NID_MAPPING,
+ .name = "Master Playback Switch",
+ .private_value = 0x1b,
+ },
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
@@ -10998,6 +11179,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc262_lenovo_3000_master_sw_put,
@@ -11152,6 +11334,11 @@
.get = alc_mux_enum_get,
.put = alc262_ultra_mux_enum_put,
},
+ {
+ .iface = NID_MAPPING,
+ .name = "Capture Source",
+ .private_value = 0x15,
+ },
{ } /* end */
};
@@ -11598,7 +11785,7 @@
if (err < 0)
return err;
- alc_ssid_check(codec, 0x15, 0x14, 0x1b);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
return 1;
}
@@ -12041,7 +12228,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc262_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -12170,6 +12356,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
@@ -12185,6 +12372,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
@@ -12202,6 +12390,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
@@ -12547,7 +12736,6 @@
dac = 0x02;
break;
case 0x15:
- case 0x21:
dac = 0x03;
break;
default:
@@ -12768,7 +12956,7 @@
if (err < 0)
return err;
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
return 1;
}
@@ -13105,8 +13293,6 @@
if (board_config == ALC268_AUTO)
spec->init_hook = alc268_auto_init;
- codec->proc_widget_hook = print_realtek_coef;
-
return 0;
}
@@ -13126,6 +13312,15 @@
0x23,
};
+static hda_nid_t alc269vb_adc_nids[1] = {
+ /* ADC1 */
+ 0x09,
+};
+
+static hda_nid_t alc269vb_capsrc_nids[1] = {
+ 0x22,
+};
+
/* NOTE: ADC2 (0x07) is connected from a recording *MIXER* (0x24),
* not a mux!
*/
@@ -13155,6 +13350,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
@@ -13175,6 +13371,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
.info = snd_hda_mixer_amp_switch_info,
.get = snd_hda_mixer_amp_switch_get,
.put = alc268_acer_master_sw_put,
@@ -13192,7 +13389,7 @@
{ }
};
-static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
+static struct snd_kcontrol_new alc269_laptop_mixer[] = {
HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
@@ -13200,16 +13397,47 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc269vb_laptop_mixer[] = {
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
/* capture mixer elements */
-static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
+static struct snd_kcontrol_new alc269_laptop_analog_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("IntMic Boost", 0x19, 0, HDA_INPUT),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc269_laptop_digital_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
{ } /* end */
};
+static struct snd_kcontrol_new alc269vb_laptop_analog_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("IntMic Boost", 0x19, 0, HDA_INPUT),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc269vb_laptop_digital_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ { } /* end */
+};
+
/* FSC amilo */
-#define alc269_fujitsu_mixer alc269_eeepc_mixer
+#define alc269_fujitsu_mixer alc269_laptop_mixer
static struct hda_verb alc269_quanta_fl1_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -13352,7 +13580,7 @@
alc269_lifebook_mic_autoswitch(codec);
}
-static struct hda_verb alc269_eeepc_dmic_init_verbs[] = {
+static struct hda_verb alc269_laptop_dmic_init_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x23, AC_VERB_SET_CONNECT_SEL, 0x05},
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
@@ -13363,7 +13591,7 @@
{}
};
-static struct hda_verb alc269_eeepc_amic_init_verbs[] = {
+static struct hda_verb alc269_laptop_amic_init_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x23, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
@@ -13373,6 +13601,28 @@
{}
};
+static struct hda_verb alc269vb_laptop_dmic_init_verbs[] = {
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x06},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
+static struct hda_verb alc269vb_laptop_amic_init_verbs[] = {
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
/* toggle speaker-output according to the hp-jack state */
static void alc269_speaker_automute(struct hda_codec *codec)
{
@@ -13390,7 +13640,7 @@
}
/* unsolicited event for HP jack sensing */
-static void alc269_eeepc_unsol_event(struct hda_codec *codec,
+static void alc269_laptop_unsol_event(struct hda_codec *codec,
unsigned int res)
{
switch (res >> 26) {
@@ -13403,7 +13653,7 @@
}
}
-static void alc269_eeepc_dmic_setup(struct hda_codec *codec)
+static void alc269_laptop_dmic_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->ext_mic.pin = 0x18;
@@ -13413,7 +13663,17 @@
spec->auto_mic = 1;
}
-static void alc269_eeepc_amic_setup(struct hda_codec *codec)
+static void alc269vb_laptop_dmic_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 6;
+ spec->auto_mic = 1;
+}
+
+static void alc269_laptop_amic_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->ext_mic.pin = 0x18;
@@ -13423,7 +13683,7 @@
spec->auto_mic = 1;
}
-static void alc269_eeepc_inithook(struct hda_codec *codec)
+static void alc269_laptop_inithook(struct hda_codec *codec)
{
alc269_speaker_automute(codec);
alc_mic_automute(codec);
@@ -13436,22 +13696,10 @@
/*
* Unmute ADC0 and set the default input to mic-in
*/
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (PCBeep, Line In, Mic 1 & Mic 2) of the
- * analog-loopback mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/*
- * Set up output mixers (0x0c - 0x0e)
+ * Set up output mixers (0x02 - 0x03)
*/
/* set vol=0 to output mixers */
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
@@ -13476,26 +13724,57 @@
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* FIXME: use matrix-type input source selection */
+ /* FIXME: use Mux-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x23, AC_VERB_SET_CONNECT_SEL, 0x00},
/* set EAPD */
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
+
+static struct hda_verb alc269vb_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /*
+ * Set up output mixers (0x02 - 0x03)
+ */
+ /* set vol=0 to output mixers */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* FIXME: use Mux-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* set EAPD */
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
{ }
};
@@ -13543,6 +13822,7 @@
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc269_ignore[] = { 0x1d, 0 };
+ hda_nid_t real_capsrc_nids;
err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc269_ignore);
@@ -13564,11 +13844,20 @@
if (spec->kctls.list)
add_mixer(spec, spec->kctls.list);
- add_verb(spec, alc269_init_verbs);
+ if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010) {
+ add_verb(spec, alc269vb_init_verbs);
+ real_capsrc_nids = alc269vb_capsrc_nids[0];
+ alc_ssid_check(codec, 0, 0x1b, 0x14, 0x21);
+ } else {
+ add_verb(spec, alc269_init_verbs);
+ real_capsrc_nids = alc269_capsrc_nids[0];
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
+ }
+
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux[0];
/* set default input source */
- snd_hda_codec_write_cache(codec, alc269_capsrc_nids[0],
+ snd_hda_codec_write_cache(codec, real_capsrc_nids,
0, AC_VERB_SET_CONNECT_SEL,
spec->input_mux->items[0].index);
@@ -13579,8 +13868,6 @@
if (!spec->cap_mixer && !spec->no_analog)
set_capture_mixer(codec);
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
-
return 1;
}
@@ -13606,8 +13893,8 @@
static const char *alc269_models[ALC269_MODEL_LAST] = {
[ALC269_BASIC] = "basic",
[ALC269_QUANTA_FL1] = "quanta",
- [ALC269_ASUS_AMIC] = "asus-amic",
- [ALC269_ASUS_DMIC] = "asus-dmic",
+ [ALC269_AMIC] = "laptop-amic",
+ [ALC269_DMIC] = "laptop-dmic",
[ALC269_FUJITSU] = "fujitsu",
[ALC269_LIFEBOOK] = "lifebook",
[ALC269_AUTO] = "auto",
@@ -13616,43 +13903,57 @@
static struct snd_pci_quirk alc269_cfg_tbl[] = {
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
- ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80JT", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82Jv", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_DMIC),
- SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_AMIC),
+ ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1113, "ASUS N63Jn", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1143, "ASUS B53f", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1183, "ASUS K72DR", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x11b3, "ASUS K52DR", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269VB_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1383, "ASUS UJ30Jc", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x13d3, "ASUS N61JA", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1413, "ASUS UL50", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1443, "ASUS UL30", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1453, "ASUS M60Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1483, "ASUS UL80", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x14f3, "ASUS F83Vf", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x14e3, "ASUS UL20", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1513, "ASUS UX30", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1593, "ASUS N51Vn", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15a3, "ASUS N60Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15b3, "ASUS N60Dp", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15c3, "ASUS N70De", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x15e3, "ASUS F83T", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1643, "ASUS M60J", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1693, "ASUS F50N", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
- ALC269_ASUS_DMIC),
+ ALC269_DMIC),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
- ALC269_ASUS_DMIC),
- SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_ASUS_DMIC),
- SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_ASUS_DMIC),
- SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
+ ALC269_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_DMIC),
+ SND_PCI_QUIRK(0x104d, 0x9071, "SONY XTB", ALC269_DMIC),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
+ SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_DMIC),
+ SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
+ SND_PCI_QUIRK(0x17aa, 0x3be9, "Quanta Wistron", ALC269_AMIC),
+ SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_AMIC),
+ SND_PCI_QUIRK(0x17ff, 0x059a, "Quanta EL3", ALC269_DMIC),
+ SND_PCI_QUIRK(0x17ff, 0x059b, "Quanta JR1", ALC269_DMIC),
{}
};
@@ -13680,47 +13981,75 @@
.setup = alc269_quanta_fl1_setup,
.init_hook = alc269_quanta_fl1_init_hook,
},
- [ALC269_ASUS_AMIC] = {
- .mixers = { alc269_eeepc_mixer },
- .cap_mixer = alc269_epc_capture_mixer,
+ [ALC269_AMIC] = {
+ .mixers = { alc269_laptop_mixer },
+ .cap_mixer = alc269_laptop_analog_capture_mixer,
.init_verbs = { alc269_init_verbs,
- alc269_eeepc_amic_init_verbs },
+ alc269_laptop_amic_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.dac_nids = alc269_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .unsol_event = alc269_eeepc_unsol_event,
- .setup = alc269_eeepc_amic_setup,
- .init_hook = alc269_eeepc_inithook,
+ .unsol_event = alc269_laptop_unsol_event,
+ .setup = alc269_laptop_amic_setup,
+ .init_hook = alc269_laptop_inithook,
},
- [ALC269_ASUS_DMIC] = {
- .mixers = { alc269_eeepc_mixer },
- .cap_mixer = alc269_epc_capture_mixer,
+ [ALC269_DMIC] = {
+ .mixers = { alc269_laptop_mixer },
+ .cap_mixer = alc269_laptop_digital_capture_mixer,
.init_verbs = { alc269_init_verbs,
- alc269_eeepc_dmic_init_verbs },
+ alc269_laptop_dmic_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.dac_nids = alc269_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .unsol_event = alc269_eeepc_unsol_event,
- .setup = alc269_eeepc_dmic_setup,
- .init_hook = alc269_eeepc_inithook,
+ .unsol_event = alc269_laptop_unsol_event,
+ .setup = alc269_laptop_dmic_setup,
+ .init_hook = alc269_laptop_inithook,
+ },
+ [ALC269VB_AMIC] = {
+ .mixers = { alc269vb_laptop_mixer },
+ .cap_mixer = alc269vb_laptop_analog_capture_mixer,
+ .init_verbs = { alc269vb_init_verbs,
+ alc269vb_laptop_amic_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc269_dac_nids),
+ .dac_nids = alc269_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc269_modes),
+ .channel_mode = alc269_modes,
+ .unsol_event = alc269_laptop_unsol_event,
+ .setup = alc269_laptop_amic_setup,
+ .init_hook = alc269_laptop_inithook,
+ },
+ [ALC269VB_DMIC] = {
+ .mixers = { alc269vb_laptop_mixer },
+ .cap_mixer = alc269vb_laptop_digital_capture_mixer,
+ .init_verbs = { alc269vb_init_verbs,
+ alc269vb_laptop_dmic_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc269_dac_nids),
+ .dac_nids = alc269_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc269_modes),
+ .channel_mode = alc269_modes,
+ .unsol_event = alc269_laptop_unsol_event,
+ .setup = alc269vb_laptop_dmic_setup,
+ .init_hook = alc269_laptop_inithook,
},
[ALC269_FUJITSU] = {
.mixers = { alc269_fujitsu_mixer },
- .cap_mixer = alc269_epc_capture_mixer,
+ .cap_mixer = alc269_laptop_digital_capture_mixer,
.init_verbs = { alc269_init_verbs,
- alc269_eeepc_dmic_init_verbs },
+ alc269_laptop_dmic_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.dac_nids = alc269_dac_nids,
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .unsol_event = alc269_eeepc_unsol_event,
- .setup = alc269_eeepc_dmic_setup,
- .init_hook = alc269_eeepc_inithook,
+ .unsol_event = alc269_laptop_unsol_event,
+ .setup = alc269_laptop_dmic_setup,
+ .init_hook = alc269_laptop_inithook,
},
[ALC269_LIFEBOOK] = {
.mixers = { alc269_lifebook_mixer },
@@ -13741,6 +14070,7 @@
struct alc_spec *spec;
int board_config;
int err;
+ int is_alc269vb = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -13757,6 +14087,7 @@
alc_free(codec);
return -ENOMEM;
}
+ is_alc269vb = 1;
}
board_config = snd_hda_check_board_config(codec, ALC269_MODEL_LAST,
@@ -13792,7 +14123,7 @@
if (board_config != ALC269_AUTO)
setup_preset(codec, &alc269_presets[board_config]);
- if (codec->subsystem_id == 0x17aa3bf8) {
+ if (board_config == ALC269_QUANTA_FL1) {
/* Due to a hardware problem on Lenovo Ideadpad, we need to
* fix the sample rate of analog I/O to 44.1kHz
*/
@@ -13805,9 +14136,16 @@
spec->stream_digital_playback = &alc269_pcm_digital_playback;
spec->stream_digital_capture = &alc269_pcm_digital_capture;
- spec->adc_nids = alc269_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
- spec->capsrc_nids = alc269_capsrc_nids;
+ if (!is_alc269vb) {
+ spec->adc_nids = alc269_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
+ spec->capsrc_nids = alc269_capsrc_nids;
+ } else {
+ spec->adc_nids = alc269vb_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc269vb_adc_nids);
+ spec->capsrc_nids = alc269vb_capsrc_nids;
+ }
+
if (!spec->cap_mixer)
set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
@@ -13821,7 +14159,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc269_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -14684,7 +15021,7 @@
spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
set_capture_mixer(codec);
- alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
+ alc_ssid_check(codec, 0x0e, 0x0f, 0x0b, 0);
return 1;
}
@@ -14939,13 +15276,16 @@
spec->vmaster_nid = 0x03;
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC861_AUTO)
+ if (board_config == ALC861_AUTO) {
spec->init_hook = alc861_auto_init;
#ifdef CONFIG_SND_HDA_POWER_SAVE
+ spec->power_hook = alc_power_eapd;
+#endif
+ }
+#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
spec->loopback.amplist = alc861_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -15572,7 +15912,7 @@
static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x22, 0);
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
}
@@ -15808,7 +16148,7 @@
if (err < 0)
return err;
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
return 1;
}
@@ -15925,7 +16265,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc861vd_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -16392,13 +16731,6 @@
/* ADC: mute amp left and right */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Front mixer: unmute input/output amp left and right (volume = 0) */
-
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -16448,6 +16780,28 @@
{ }
};
+static struct hda_verb alc663_init_verbs[] = {
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ { }
+};
+
+static struct hda_verb alc272_init_verbs[] = {
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ { }
+};
+
static struct hda_verb alc662_sue_init_verbs[] = {
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_FRONT_EVENT},
{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_HP_EVENT},
@@ -16467,61 +16821,6 @@
{}
};
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc662_auto_init_verbs[] = {
- /*
- * Unmute ADC and set the default input to mic-in
- */
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front
- * panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /*
- * Set up output mixers (0x0c - 0x0f)
- */
- /* set vol=0 to output mixers */
- {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- { }
-};
-
-/* additional verbs for ALC663 */
-static struct hda_verb alc663_auto_init_verbs[] = {
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- { }
-};
-
static struct hda_verb alc663_m51va_init_verbs[] = {
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
@@ -17272,6 +17571,7 @@
SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1173, "ASUS K73Jn", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2),
@@ -17307,6 +17607,7 @@
SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18c3, "ASUS VX5", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
@@ -17334,6 +17635,7 @@
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
@@ -17952,15 +18254,23 @@
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux[0];
- add_verb(spec, alc662_auto_init_verbs);
- if (codec->vendor_id == 0x10ec0663)
- add_verb(spec, alc663_auto_init_verbs);
+ add_verb(spec, alc662_init_verbs);
+ if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
+ codec->vendor_id == 0x10ec0665)
+ add_verb(spec, alc663_init_verbs);
+
+ if (codec->vendor_id == 0x10ec0272)
+ add_verb(spec, alc272_init_verbs);
err = alc_auto_add_mic_boost(codec);
if (err < 0)
return err;
- alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+ if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0x21);
+ else
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14, 0);
return 1;
}
@@ -18046,11 +18356,20 @@
if (!spec->cap_mixer)
set_capture_mixer(codec);
- if (codec->vendor_id == 0x10ec0662)
- set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
- else
- set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
+ switch (codec->vendor_id) {
+ case 0x10ec0662:
+ set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
+ break;
+ case 0x10ec0272:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
+ break;
+ case 0x10ec0273:
+ set_beep_amp(spec, 0x0b, 0x03, HDA_INPUT);
+ break;
+ }
spec->vmaster_nid = 0x02;
codec->patch_ops = alc_patch_ops;
@@ -18060,7 +18379,6 @@
if (!spec->loopback.amplist)
spec->loopback.amplist = alc662_loopbacks;
#endif
- codec->proc_widget_hook = print_realtek_coef;
return 0;
}
@@ -18101,6 +18419,8 @@
{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
.patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
+ { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
+ { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c
index 43b436c..f419ee8 100644
--- a/sound/pci/hda/patch_si3054.c
+++ b/sound/pci/hda/patch_si3054.c
@@ -122,6 +122,7 @@
#define SI3054_KCONTROL(kname,reg,mask) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = kname, \
+ .subdevice = HDA_SUBDEV_NID_FLAG | reg, \
.info = si3054_switch_info, \
.get = si3054_switch_get, \
.put = si3054_switch_put, \
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 799ba25..8c416bb 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -568,6 +568,11 @@
0x0f, 0x10, 0x11, 0x1f, 0x20,
};
+static hda_nid_t stac92hd88xxx_pin_nids[10] = {
+ 0x0a, 0x0b, 0x0c, 0x0d,
+ 0x0f, 0x11, 0x1f, 0x20,
+};
+
#define STAC92HD71BXX_NUM_PINS 13
static hda_nid_t stac92hd71bxx_pin_nids_4port[STAC92HD71BXX_NUM_PINS] = {
0x0a, 0x0b, 0x0c, 0x0d, 0x00,
@@ -2688,7 +2693,7 @@
stac_control_new(struct sigmatel_spec *spec,
struct snd_kcontrol_new *ktemp,
const char *name,
- hda_nid_t nid)
+ unsigned int subdev)
{
struct snd_kcontrol_new *knew;
@@ -2704,8 +2709,7 @@
spec->kctls.alloced--;
return NULL;
}
- if (nid)
- knew->subdevice = HDA_SUBDEV_NID_FLAG | nid;
+ knew->subdevice = subdev;
return knew;
}
@@ -2715,7 +2719,7 @@
unsigned long val)
{
struct snd_kcontrol_new *knew = stac_control_new(spec, ktemp, name,
- get_amp_nid_(val));
+ HDA_SUBDEV_AMP_FLAG);
if (!knew)
return -ENOMEM;
knew->index = idx;
@@ -2874,6 +2878,13 @@
conn_len = snd_hda_get_connections(codec, nid, conn,
HDA_MAX_CONNECTIONS);
+ /* 92HD88: trace back up the link of nids to find the DAC */
+ while (conn_len == 1 && (get_wcaps_type(get_wcaps(codec, conn[0]))
+ != AC_WID_AUD_OUT)) {
+ nid = conn[0];
+ conn_len = snd_hda_get_connections(codec, nid, conn,
+ HDA_MAX_CONNECTIONS);
+ }
for (j = 0; j < conn_len; j++) {
wcaps = get_wcaps(codec, conn[j]);
wtype = get_wcaps_type(wcaps);
@@ -4160,34 +4171,52 @@
static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
int enable);
+static inline int get_int_hint(struct hda_codec *codec, const char *key,
+ int *valp)
+{
+ const char *p;
+ p = snd_hda_get_hint(codec, key);
+ if (p) {
+ unsigned long val;
+ if (!strict_strtoul(p, 0, &val)) {
+ *valp = val;
+ return 1;
+ }
+ }
+ return 0;
+}
+
/* override some hints from the hwdep entry */
static void stac_store_hints(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- const char *p;
int val;
val = snd_hda_get_bool_hint(codec, "hp_detect");
if (val >= 0)
spec->hp_detect = val;
- p = snd_hda_get_hint(codec, "gpio_mask");
- if (p) {
- spec->gpio_mask = simple_strtoul(p, NULL, 0);
+ if (get_int_hint(codec, "gpio_mask", &spec->gpio_mask)) {
spec->eapd_mask = spec->gpio_dir = spec->gpio_data =
spec->gpio_mask;
}
- p = snd_hda_get_hint(codec, "gpio_dir");
- if (p)
- spec->gpio_dir = simple_strtoul(p, NULL, 0) & spec->gpio_mask;
- p = snd_hda_get_hint(codec, "gpio_data");
- if (p)
- spec->gpio_data = simple_strtoul(p, NULL, 0) & spec->gpio_mask;
- p = snd_hda_get_hint(codec, "eapd_mask");
- if (p)
- spec->eapd_mask = simple_strtoul(p, NULL, 0) & spec->gpio_mask;
+ if (get_int_hint(codec, "gpio_dir", &spec->gpio_dir))
+ spec->gpio_mask &= spec->gpio_mask;
+ if (get_int_hint(codec, "gpio_data", &spec->gpio_data))
+ spec->gpio_dir &= spec->gpio_mask;
+ if (get_int_hint(codec, "eapd_mask", &spec->eapd_mask))
+ spec->eapd_mask &= spec->gpio_mask;
+ if (get_int_hint(codec, "gpio_mute", &spec->gpio_mute))
+ spec->gpio_mute &= spec->gpio_mask;
val = snd_hda_get_bool_hint(codec, "eapd_switch");
if (val >= 0)
spec->eapd_switch = val;
+ get_int_hint(codec, "gpio_led_polarity", &spec->gpio_led_polarity);
+ if (get_int_hint(codec, "gpio_led", &spec->gpio_led)) {
+ spec->gpio_mask |= spec->gpio_led;
+ spec->gpio_dir |= spec->gpio_led;
+ if (spec->gpio_led_polarity)
+ spec->gpio_data |= spec->gpio_led;
+ }
}
static int stac92xx_init(struct hda_codec *codec)
@@ -4334,6 +4363,12 @@
if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
stac_issue_unsol_event(codec, nid);
}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ /* sync mute LED */
+ if (spec->gpio_led && codec->patch_ops.check_power_status)
+ codec->patch_ops.check_power_status(codec, 0x01);
+#endif
if (spec->dac_list)
stac92xx_power_down(codec);
return 0;
@@ -4372,18 +4407,8 @@
static void stac92xx_shutup(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- int i;
- hda_nid_t nid;
- /* reset each pin before powering down DAC/ADC to avoid click noise */
- nid = codec->start_nid;
- for (i = 0; i < codec->num_nodes; i++, nid++) {
- unsigned int wcaps = get_wcaps(codec, nid);
- unsigned int wid_type = get_wcaps_type(wcaps);
- if (wid_type == AC_WID_PIN)
- snd_hda_codec_read(codec, nid, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
- }
+ snd_hda_shutup_pins(codec);
if (spec->eapd_mask)
stac_gpio_set(codec, spec->gpio_mask,
@@ -4735,19 +4760,14 @@
static void set_hp_led_gpio(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- switch (codec->vendor_id) {
- case 0x111d7608:
- /* GPIO 0 */
- spec->gpio_led = 0x01;
- break;
- case 0x111d7600:
- case 0x111d7601:
- case 0x111d7602:
- case 0x111d7603:
- /* GPIO 3 */
- spec->gpio_led = 0x08;
- break;
- }
+ unsigned int gpio;
+
+ gpio = snd_hda_param_read(codec, codec->afg, AC_PAR_GPIO_CAP);
+ gpio &= AC_GPIO_IO_COUNT;
+ if (gpio > 3)
+ spec->gpio_led = 0x08; /* GPIO 3 */
+ else
+ spec->gpio_led = 0x01; /* GPIO 0 */
}
/*
@@ -4770,7 +4790,7 @@
* Need more information on whether it is true across the entire series.
* -- kunal
*/
-static int find_mute_led_gpio(struct hda_codec *codec)
+static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity)
{
struct sigmatel_spec *spec = codec->spec;
const struct dmi_device *dev = NULL;
@@ -4797,7 +4817,7 @@
*/
if (!hp_blike_system(codec->subsystem_id)) {
set_hp_led_gpio(codec);
- spec->gpio_led_polarity = 1;
+ spec->gpio_led_polarity = default_polarity;
return 1;
}
}
@@ -4895,6 +4915,11 @@
stac_issue_unsol_event(codec,
spec->autocfg.line_out_pins[0]);
}
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ /* sync mute LED */
+ if (spec->gpio_led && codec->patch_ops.check_power_status)
+ codec->patch_ops.check_power_status(codec, 0x01);
+#endif
return 0;
}
@@ -4914,43 +4939,29 @@
hda_nid_t nid)
{
struct sigmatel_spec *spec = codec->spec;
+ int i, muted = 1;
- if (nid == 0x10) {
- if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
- HDA_AMP_MUTE)
- spec->gpio_data &= ~spec->gpio_led; /* orange */
- else
- spec->gpio_data |= spec->gpio_led; /* white */
-
- if (!spec->gpio_led_polarity) {
- /* LED state is inverted on these systems */
- spec->gpio_data ^= spec->gpio_led;
+ for (i = 0; i < spec->multiout.num_dacs; i++) {
+ nid = spec->multiout.dac_nids[i];
+ if (!(snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
+ HDA_AMP_MUTE)) {
+ muted = 0; /* something heard */
+ break;
}
+ }
+ if (muted)
+ spec->gpio_data &= ~spec->gpio_led; /* orange */
+ else
+ spec->gpio_data |= spec->gpio_led; /* white */
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir,
- spec->gpio_data);
+ if (!spec->gpio_led_polarity) {
+ /* LED state is inverted on these systems */
+ spec->gpio_data ^= spec->gpio_led;
}
- return 0;
-}
-
-static int idt92hd83xxx_hp_check_power_status(struct hda_codec *codec,
- hda_nid_t nid)
-{
- struct sigmatel_spec *spec = codec->spec;
-
- if (nid != 0x13)
- return 0;
- if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) & HDA_AMP_MUTE)
- spec->gpio_data |= spec->gpio_led; /* mute LED on */
- else
- spec->gpio_data &= ~spec->gpio_led; /* mute LED off */
stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data);
-
return 0;
}
-
#endif
static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
@@ -5272,7 +5283,6 @@
hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
int err;
int num_dacs;
- hda_nid_t nid;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -5311,7 +5321,18 @@
stac92hd83xxx_brd_tbl[spec->board_config]);
switch (codec->vendor_id) {
+ case 0x111d7666:
+ case 0x111d7667:
+ case 0x111d7668:
+ case 0x111d7669:
+ spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
+ spec->pin_nids = stac92hd88xxx_pin_nids;
+ spec->mono_nid = 0;
+ spec->digbeep_nid = 0;
+ spec->num_pwrs = 0;
+ break;
case 0x111d7604:
+ case 0x111d76d4:
case 0x111d7605:
case 0x111d76d5:
if (spec->board_config == STAC_92HD83XXX_PWR_REF)
@@ -5322,8 +5343,10 @@
codec->patch_ops = stac92xx_patch_ops;
- if (spec->board_config == STAC_92HD83XXX_HP)
- spec->gpio_led = 0x01;
+ if (find_mute_led_gpio(codec, 0))
+ snd_printd("mute LED gpio %d polarity %d\n",
+ spec->gpio_led,
+ spec->gpio_led_polarity);
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
@@ -5332,7 +5355,7 @@
spec->gpio_data |= spec->gpio_led;
/* register check_power_status callback. */
codec->patch_ops.check_power_status =
- idt92hd83xxx_hp_check_power_status;
+ stac92xx_hp_check_power_status;
}
#endif
@@ -5352,24 +5375,21 @@
return err;
}
- switch (spec->board_config) {
- case STAC_DELL_S14:
- nid = 0xf;
- break;
- default:
- nid = 0xe;
- break;
- }
-
- num_dacs = snd_hda_get_connections(codec, nid,
+ /* docking output support */
+ num_dacs = snd_hda_get_connections(codec, 0xF,
conn, STAC92HD83_DAC_COUNT + 1) - 1;
- if (num_dacs < 0)
- num_dacs = STAC92HD83_DAC_COUNT;
-
- /* set port X to select the last DAC
- */
- snd_hda_codec_write_cache(codec, nid, 0,
+ /* skip non-DAC connections */
+ while (num_dacs >= 0 &&
+ (get_wcaps_type(get_wcaps(codec, conn[num_dacs]))
+ != AC_WID_AUD_OUT))
+ num_dacs--;
+ /* set port E and F to select the last DAC */
+ if (num_dacs >= 0) {
+ snd_hda_codec_write_cache(codec, 0xE, 0,
AC_VERB_SET_CONNECT_SEL, num_dacs);
+ snd_hda_codec_write_cache(codec, 0xF, 0,
+ AC_VERB_SET_CONNECT_SEL, num_dacs);
+ }
codec->proc_widget_hook = stac92hd_proc_hook;
@@ -5431,6 +5451,54 @@
return 0;
}
+/* HP dv7 bass switch - GPIO5 */
+#define stac_hp_bass_gpio_info snd_ctl_boolean_mono_info
+static int stac_hp_bass_gpio_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct sigmatel_spec *spec = codec->spec;
+ ucontrol->value.integer.value[0] = !!(spec->gpio_data & 0x20);
+ return 0;
+}
+
+static int stac_hp_bass_gpio_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct sigmatel_spec *spec = codec->spec;
+ unsigned int gpio_data;
+
+ gpio_data = (spec->gpio_data & ~0x20) |
+ (ucontrol->value.integer.value[0] ? 0x20 : 0);
+ if (gpio_data == spec->gpio_data)
+ return 0;
+ spec->gpio_data = gpio_data;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data);
+ return 1;
+}
+
+static struct snd_kcontrol_new stac_hp_bass_sw_ctrl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = stac_hp_bass_gpio_info,
+ .get = stac_hp_bass_gpio_get,
+ .put = stac_hp_bass_gpio_put,
+};
+
+static int stac_add_hp_bass_switch(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+
+ if (!stac_control_new(spec, &stac_hp_bass_sw_ctrl,
+ "Bass Speaker Playback Switch", 0))
+ return -ENOMEM;
+
+ spec->gpio_mask |= 0x20;
+ spec->gpio_dir |= 0x20;
+ spec->gpio_data |= 0x20;
+ return 0;
+}
+
static int patch_stac92hd71bxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
@@ -5602,7 +5670,6 @@
*/
spec->num_smuxes = 1;
spec->num_dmuxes = 1;
- spec->gpio_led = 0x01;
/* fallthrough */
case STAC_HP_DV5:
snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
@@ -5617,8 +5684,6 @@
spec->num_dmics = 1;
spec->num_dmuxes = 1;
spec->num_smuxes = 1;
- /* orange/white mute led on GPIO3, orange=0, white=1 */
- spec->gpio_led = 0x08;
break;
}
@@ -5640,7 +5705,7 @@
}
}
- if (find_mute_led_gpio(codec))
+ if (find_mute_led_gpio(codec, 1))
snd_printd("mute LED gpio %d polarity %d\n",
spec->gpio_led,
spec->gpio_led_polarity);
@@ -5674,6 +5739,15 @@
return err;
}
+ /* enable bass on HP dv7 */
+ if (spec->board_config == STAC_HP_DV5) {
+ unsigned int cap;
+ cap = snd_hda_param_read(codec, 0x1, AC_PAR_GPIO_CAP);
+ cap &= AC_GPIO_IO_COUNT;
+ if (cap >= 6)
+ stac_add_hp_bass_switch(codec);
+ }
+
codec->proc_widget_hook = stac92hd7x_proc_hook;
return 0;
@@ -6172,8 +6246,13 @@
{ .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 },
{ .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx},
{ .id = 0x111d7604, .name = "92HD83C1X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76d4, .name = "92HD83C1C5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76d5, .name = "92HD81B1C5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d7666, .name = "92HD88B3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d7667, .name = "92HD88B1", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d7668, .name = "92HD88B2", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d7669, .name = "92HD88B4", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx},
{ .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx },
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index b70e26a..9ddc373 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -54,6 +54,8 @@
#include "hda_codec.h"
#include "hda_local.h"
+#define NID_MAPPING (-1)
+
/* amp values */
#define AMP_VAL_IDX_SHIFT 19
#define AMP_VAL_IDX_MASK (0x0f<<19)
@@ -157,6 +159,19 @@
#endif
};
+static struct via_spec * via_new_spec(struct hda_codec *codec)
+{
+ struct via_spec *spec;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return NULL;
+
+ codec->spec = spec;
+ spec->codec = codec;
+ return spec;
+}
+
static enum VIA_HDA_CODEC get_codec_type(struct hda_codec *codec)
{
u32 vendor_id = codec->vendor_id;
@@ -443,11 +458,27 @@
if (!knew->name)
return -ENOMEM;
if (get_amp_nid_(val))
- knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
+ knew->subdevice = HDA_SUBDEV_AMP_FLAG;
knew->private_value = val;
return 0;
}
+static struct snd_kcontrol_new *via_clone_control(struct via_spec *spec,
+ struct snd_kcontrol_new *tmpl)
+{
+ struct snd_kcontrol_new *knew;
+
+ snd_array_init(&spec->kctls, sizeof(*knew), 32);
+ knew = snd_array_new(&spec->kctls);
+ if (!knew)
+ return NULL;
+ *knew = *tmpl;
+ knew->name = kstrdup(tmpl->name, GFP_KERNEL);
+ if (!knew->name)
+ return NULL;
+ return 0;
+}
+
static void via_free_kctls(struct hda_codec *codec)
{
struct via_spec *spec = codec->spec;
@@ -1088,24 +1119,9 @@
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct via_spec *spec = codec->spec;
- hda_nid_t nid;
+ hda_nid_t nid = kcontrol->private_value;
unsigned int pinsel;
- switch (spec->codec_type) {
- case VT1718S:
- nid = 0x34;
- break;
- case VT2002P:
- nid = 0x35;
- break;
- case VT1812:
- nid = 0x3d;
- break;
- default:
- nid = spec->autocfg.hp_pins[0];
- break;
- }
/* use !! to translate conn sel 2 for VT1718S */
pinsel = !!snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_SEL,
@@ -1127,29 +1143,24 @@
}
}
+static hda_nid_t side_mute_channel(struct via_spec *spec)
+{
+ switch (spec->codec_type) {
+ case VT1708: return 0x1b;
+ case VT1709_10CH: return 0x29;
+ case VT1708B_8CH: /* fall thru */
+ case VT1708S: return 0x27;
+ default: return 0;
+ }
+}
+
static int update_side_mute_status(struct hda_codec *codec)
{
/* mute side channel */
struct via_spec *spec = codec->spec;
unsigned int parm = spec->hp_independent_mode
? AMP_OUT_MUTE : AMP_OUT_UNMUTE;
- hda_nid_t sw3;
-
- switch (spec->codec_type) {
- case VT1708:
- sw3 = 0x1b;
- break;
- case VT1709_10CH:
- sw3 = 0x29;
- break;
- case VT1708B_8CH:
- case VT1708S:
- sw3 = 0x27;
- break;
- default:
- sw3 = 0;
- break;
- }
+ hda_nid_t sw3 = side_mute_channel(spec);
if (sw3)
snd_hda_codec_write(codec, sw3, 0, AC_VERB_SET_AMP_GAIN_MUTE,
@@ -1162,28 +1173,11 @@
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct via_spec *spec = codec->spec;
- hda_nid_t nid = spec->autocfg.hp_pins[0];
+ hda_nid_t nid = kcontrol->private_value;
unsigned int pinsel = ucontrol->value.enumerated.item[0];
/* Get Independent Mode index of headphone pin widget */
spec->hp_independent_mode = spec->hp_independent_mode_index == pinsel
? 1 : 0;
-
- switch (spec->codec_type) {
- case VT1718S:
- nid = 0x34;
- pinsel = pinsel ? 2 : 0; /* indep HP use AOW4 (index 2) */
- spec->multiout.num_dacs = 4;
- break;
- case VT2002P:
- nid = 0x35;
- break;
- case VT1812:
- nid = 0x3d;
- break;
- default:
- nid = spec->autocfg.hp_pins[0];
- break;
- }
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, pinsel);
if (spec->multiout.hp_nid && spec->multiout.hp_nid
@@ -1207,18 +1201,55 @@
return 0;
}
-static struct snd_kcontrol_new via_hp_mixer[] = {
+static struct snd_kcontrol_new via_hp_mixer[2] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Independent HP",
- .count = 1,
.info = via_independent_hp_info,
.get = via_independent_hp_get,
.put = via_independent_hp_put,
},
- { } /* end */
+ {
+ .iface = NID_MAPPING,
+ .name = "Independent HP",
+ },
};
+static int via_hp_build(struct via_spec *spec)
+{
+ struct snd_kcontrol_new *knew;
+ hda_nid_t nid;
+
+ knew = via_clone_control(spec, &via_hp_mixer[0]);
+ if (knew == NULL)
+ return -ENOMEM;
+
+ switch (spec->codec_type) {
+ case VT1718S:
+ nid = 0x34;
+ break;
+ case VT2002P:
+ nid = 0x35;
+ break;
+ case VT1812:
+ nid = 0x3d;
+ break;
+ default:
+ nid = spec->autocfg.hp_pins[0];
+ break;
+ }
+
+ knew->subdevice = HDA_SUBDEV_NID_FLAG | nid;
+ knew->private_value = nid;
+
+ knew = via_clone_control(spec, &via_hp_mixer[1]);
+ if (knew == NULL)
+ return -ENOMEM;
+ knew->subdevice = side_mute_channel(spec);
+
+ return 0;
+}
+
static void notify_aa_path_ctls(struct hda_codec *codec)
{
int i;
@@ -1376,7 +1407,7 @@
return 1;
}
-static struct snd_kcontrol_new via_smart51_mixer[] = {
+static struct snd_kcontrol_new via_smart51_mixer[2] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Smart 5.1",
@@ -1385,9 +1416,36 @@
.get = via_smart51_get,
.put = via_smart51_put,
},
- {} /* end */
+ {
+ .iface = NID_MAPPING,
+ .name = "Smart 5.1",
+ }
};
+static int via_smart51_build(struct via_spec *spec)
+{
+ struct snd_kcontrol_new *knew;
+ int index[] = { AUTO_PIN_MIC, AUTO_PIN_FRONT_MIC, AUTO_PIN_LINE };
+ hda_nid_t nid;
+ int i;
+
+ knew = via_clone_control(spec, &via_smart51_mixer[0]);
+ if (knew == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(index); i++) {
+ nid = spec->autocfg.input_pins[index[i]];
+ if (nid) {
+ knew = via_clone_control(spec, &via_smart51_mixer[1]);
+ if (knew == NULL)
+ return -ENOMEM;
+ knew->subdevice = nid;
+ }
+ }
+
+ return 0;
+}
+
/* capture mixer elements */
static struct snd_kcontrol_new vt1708_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_INPUT),
@@ -1819,8 +1877,9 @@
static int via_build_controls(struct hda_codec *codec)
{
struct via_spec *spec = codec->spec;
- int err;
- int i;
+ struct snd_kcontrol *kctl;
+ struct snd_kcontrol_new *knew;
+ int err, i;
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
@@ -1845,6 +1904,27 @@
return err;
}
+ /* assign Capture Source enums to NID */
+ kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+ for (i = 0; kctl && i < kctl->count; i++) {
+ err = snd_hda_add_nid(codec, kctl, i, spec->mux_nids[i]);
+ if (err < 0)
+ return err;
+ }
+
+ /* other nid->control mapping */
+ for (i = 0; i < spec->num_mixers; i++) {
+ for (knew = spec->mixers[i]; knew->name; knew++) {
+ if (knew->iface != NID_MAPPING)
+ continue;
+ kctl = snd_hda_find_mixer_ctl(codec, knew->name);
+ if (kctl == NULL)
+ continue;
+ err = snd_hda_add_nid(codec, kctl, 0,
+ knew->subdevice);
+ }
+ }
+
/* init power states */
set_jack_power_state(codec);
analog_low_current_mode(codec, 1);
@@ -2481,9 +2561,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -2554,12 +2634,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1708_parse_auto_config(codec);
if (err < 0) {
@@ -2597,7 +2675,6 @@
#ifdef CONFIG_SND_HDA_POWER_SAVE
spec->loopback.amplist = vt1708_loopbacks;
#endif
- spec->codec = codec;
INIT_DELAYED_WORK(&spec->vt1708_hp_work, vt1708_update_hp_jack_state);
return 0;
}
@@ -3010,9 +3087,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -3032,12 +3109,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
err = vt1709_parse_auto_config(codec);
if (err < 0) {
via_free(codec);
@@ -3126,12 +3201,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
err = vt1709_parse_auto_config(codec);
if (err < 0) {
via_free(codec);
@@ -3581,9 +3654,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -3605,12 +3678,10 @@
if (get_codec_type(codec) == VT1708BCE)
return patch_vt1708S(codec);
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1708B_parse_auto_config(codec);
if (err < 0) {
@@ -3657,12 +3728,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1708B_parse_auto_config(codec);
if (err < 0) {
@@ -4071,9 +4140,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -4103,12 +4172,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1708S_parse_auto_config(codec);
if (err < 0) {
@@ -4443,7 +4510,7 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
return 1;
}
@@ -4464,12 +4531,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1702_parse_auto_config(codec);
if (err < 0) {
@@ -4865,9 +4930,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -4888,12 +4953,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1718S_parse_auto_config(codec);
if (err < 0) {
@@ -5014,6 +5077,7 @@
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Digital Mic Capture Switch",
+ .subdevice = HDA_SUBDEV_NID_FLAG | 0x26,
.count = 1,
.info = vt1716s_dmic_info,
.get = vt1716s_dmic_get,
@@ -5361,9 +5425,9 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
- spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+ via_smart51_build(spec);
return 1;
}
@@ -5384,12 +5448,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1716S_parse_auto_config(codec);
if (err < 0) {
@@ -5719,7 +5781,7 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
return 1;
}
@@ -5741,12 +5803,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt2002P_parse_auto_config(codec);
if (err < 0) {
@@ -6070,7 +6130,7 @@
spec->input_mux = &spec->private_imux[0];
if (spec->hp_mux)
- spec->mixers[spec->num_mixers++] = via_hp_mixer;
+ via_hp_build(spec);
return 1;
}
@@ -6092,12 +6152,10 @@
int err;
/* create a codec specific record */
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ spec = via_new_spec(codec);
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
-
/* automatic parse from the BIOS config */
err = vt1812_parse_auto_config(codec);
if (err < 0) {
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index c7cff6f..4fc6d8b 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -106,7 +106,7 @@
MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
-static const struct pci_device_id snd_ice1712_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_ice1712_ids) = {
{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 }, /* ICE1712 */
{ 0, }
};
@@ -1180,6 +1180,10 @@
snd_pcm_set_sync(substream);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates);
+ if (is_pro_rate_locked(ice)) {
+ runtime->hw.rate_min = PRO_RATE_DEFAULT;
+ runtime->hw.rate_max = PRO_RATE_DEFAULT;
+ }
if (ice->spdif.ops.open)
ice->spdif.ops.open(ice, substream);
@@ -1197,6 +1201,11 @@
snd_pcm_set_sync(substream);
snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates);
+ if (is_pro_rate_locked(ice)) {
+ runtime->hw.rate_min = PRO_RATE_DEFAULT;
+ runtime->hw.rate_max = PRO_RATE_DEFAULT;
+ }
+
return 0;
}
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index ae29073..c1498fa 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -94,7 +94,7 @@
/* Both VT1720 and VT1724 have the same PCI IDs */
-static const struct pci_device_id snd_vt1724_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_vt1724_ids) = {
{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 },
{ 0, }
};
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index b990143..6433e65 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -420,7 +420,7 @@
u32 int_sta_mask; /* interrupt status mask */
};
-static struct pci_device_id snd_intel8x0_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_intel8x0_ids) = {
{ PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL }, /* 82801AA */
{ PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL }, /* 82901AB */
{ PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL }, /* 82801BA */
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 9e7d12e..13cec1e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -219,7 +219,7 @@
unsigned int pcm_pos_shift;
};
-static struct pci_device_id snd_intel8x0m_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_intel8x0m_ids) = {
{ PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL }, /* 82801AA */
{ PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL }, /* 82901AB */
{ PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL }, /* 82801BA */
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 7cc38a1..6d79570 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -418,7 +418,7 @@
MODULE_PARM_DESC(enable, "Enable Korg 1212 soundcard.");
MODULE_AUTHOR("Haroldo Gamal <gamal@alternex.com.br>");
-static struct pci_device_id snd_korg1212_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_korg1212_ids) = {
{
.vendor = 0x10b5,
.device = 0x906d,
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index 11b8c65..0cca560 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -55,7 +55,7 @@
#define PCI_DEVICE_ID_PLX_LX6464ES PCI_DEVICE_ID_PLX_9056
-static struct pci_device_id snd_lx6464es_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_lx6464es_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_LX6464ES),
.subvendor = PCI_VENDOR_ID_DIGIGRAM,
.subdevice = PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 75283fbb..b64e781 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -861,7 +861,7 @@
/*
* pci ids
*/
-static struct pci_device_id snd_m3_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_m3_ids) = {
{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO_1, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index a83d196..7e8e7da 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -60,7 +60,7 @@
/*
*/
-static struct pci_device_id snd_mixart_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_mixart_ids) = {
{ PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */
{ 0, }
};
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 97a0731..5a60492 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -262,7 +262,7 @@
/*
* PCI ids
*/
-static struct pci_device_id snd_nm256_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_nm256_ids) = {
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
diff --git a/sound/pci/oxygen/Makefile b/sound/pci/oxygen/Makefile
index 389941c..acd8f15 100644
--- a/sound/pci/oxygen/Makefile
+++ b/sound/pci/oxygen/Makefile
@@ -2,7 +2,7 @@
snd-hifier-objs := hifier.o
snd-oxygen-objs := oxygen.o
snd-virtuoso-objs := virtuoso.o xonar_lib.o \
- xonar_pcm179x.o xonar_cs43xx.o xonar_hdmi.o
+ xonar_pcm179x.o xonar_cs43xx.o xonar_wm87x6.o xonar_hdmi.o
obj-$(CONFIG_SND_OXYGEN_LIB) += snd-oxygen-lib.o
obj-$(CONFIG_SND_HIFIER) += snd-hifier.o
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index e3c229b..5a87d68 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -48,7 +48,7 @@
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "enable card");
-static struct pci_device_id hifier_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(hifier_ids) = {
{ OXYGEN_PCI_SUBID(0x14c3, 0x1710) },
{ OXYGEN_PCI_SUBID(0x14c3, 0x1711) },
{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index acbedeb..289cb4d 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -72,7 +72,7 @@
MODEL_CLARO_HALO, /* HT-Omega Claro halo */
};
-static struct pci_device_id oxygen_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(oxygen_ids) = {
{ OXYGEN_PCI_SUBID(0x10b0, 0x0216), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x10b0, 0x0218), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x10b0, 0x0219), .driver_data = MODEL_CMEDIA_REF },
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 6accaf9..f03a2f2 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -40,7 +40,7 @@
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "enable card");
-static struct pci_device_id xonar_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(xonar_ids) = {
{ OXYGEN_PCI_SUBID(0x1043, 0x8269) },
{ OXYGEN_PCI_SUBID(0x1043, 0x8275) },
{ OXYGEN_PCI_SUBID(0x1043, 0x82b7) },
@@ -49,6 +49,7 @@
{ OXYGEN_PCI_SUBID(0x1043, 0x834f) },
{ OXYGEN_PCI_SUBID(0x1043, 0x835c) },
{ OXYGEN_PCI_SUBID(0x1043, 0x835d) },
+ { OXYGEN_PCI_SUBID(0x1043, 0x838e) },
{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
{ }
};
@@ -61,6 +62,8 @@
return 0;
if (get_xonar_cs43xx_model(chip, id) >= 0)
return 0;
+ if (get_xonar_wm87x6_model(chip, id) >= 0)
+ return 0;
return -EINVAL;
}
diff --git a/sound/pci/oxygen/wm8766.h b/sound/pci/oxygen/wm8766.h
new file mode 100644
index 0000000..e0e849a
--- /dev/null
+++ b/sound/pci/oxygen/wm8766.h
@@ -0,0 +1,73 @@
+#ifndef WM8766_H_INCLUDED
+#define WM8766_H_INCLUDED
+
+#define WM8766_LDA1 0x00
+#define WM8766_RDA1 0x01
+#define WM8766_DAC_CTRL 0x02
+#define WM8766_INT_CTRL 0x03
+#define WM8766_LDA2 0x04
+#define WM8766_RDA2 0x05
+#define WM8766_LDA3 0x06
+#define WM8766_RDA3 0x07
+#define WM8766_MASTDA 0x08
+#define WM8766_DAC_CTRL2 0x09
+#define WM8766_DAC_CTRL3 0x0a
+#define WM8766_MUTE1 0x0c
+#define WM8766_MUTE2 0x0f
+#define WM8766_RESET 0x1f
+
+/* LDAx/RDAx/MASTDA */
+#define WM8766_ATT_MASK 0x0ff
+#define WM8766_UPDATE 0x100
+/* DAC_CTRL */
+#define WM8766_MUTEALL 0x001
+#define WM8766_DEEMPALL 0x002
+#define WM8766_PWDN 0x004
+#define WM8766_ATC 0x008
+#define WM8766_IZD 0x010
+#define WM8766_PL_LEFT_MASK 0x060
+#define WM8766_PL_LEFT_MUTE 0x000
+#define WM8766_PL_LEFT_LEFT 0x020
+#define WM8766_PL_LEFT_RIGHT 0x040
+#define WM8766_PL_LEFT_LRMIX 0x060
+#define WM8766_PL_RIGHT_MASK 0x180
+#define WM8766_PL_RIGHT_MUTE 0x000
+#define WM8766_PL_RIGHT_LEFT 0x080
+#define WM8766_PL_RIGHT_RIGHT 0x100
+#define WM8766_PL_RIGHT_LRMIX 0x180
+/* INT_CTRL */
+#define WM8766_FMT_MASK 0x003
+#define WM8766_FMT_RJUST 0x000
+#define WM8766_FMT_LJUST 0x001
+#define WM8766_FMT_I2S 0x002
+#define WM8766_FMT_DSP 0x003
+#define WM8766_LRP 0x004
+#define WM8766_BCP 0x008
+#define WM8766_IWL_MASK 0x030
+#define WM8766_IWL_16 0x000
+#define WM8766_IWL_20 0x010
+#define WM8766_IWL_24 0x020
+#define WM8766_IWL_32 0x030
+#define WM8766_PHASE_MASK 0x1c0
+/* DAC_CTRL2 */
+#define WM8766_ZCD 0x001
+#define WM8766_DZFM_MASK 0x006
+#define WM8766_DMUTE_MASK 0x038
+#define WM8766_DEEMP_MASK 0x1c0
+/* DAC_CTRL3 */
+#define WM8766_DACPD_MASK 0x00e
+#define WM8766_PWRDNALL 0x010
+#define WM8766_MS 0x020
+#define WM8766_RATE_MASK 0x1c0
+#define WM8766_RATE_128 0x000
+#define WM8766_RATE_192 0x040
+#define WM8766_RATE_256 0x080
+#define WM8766_RATE_384 0x0c0
+#define WM8766_RATE_512 0x100
+#define WM8766_RATE_768 0x140
+/* MUTE1 */
+#define WM8766_MPD1 0x040
+/* MUTE2 */
+#define WM8766_MPD2 0x020
+
+#endif
diff --git a/sound/pci/oxygen/wm8776.h b/sound/pci/oxygen/wm8776.h
new file mode 100644
index 0000000..1a96f56
--- /dev/null
+++ b/sound/pci/oxygen/wm8776.h
@@ -0,0 +1,177 @@
+#ifndef WM8776_H_INCLUDED
+#define WM8776_H_INCLUDED
+
+/*
+ * the following register names are from:
+ * wm8776.h -- WM8776 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define WM8776_HPLVOL 0x00
+#define WM8776_HPRVOL 0x01
+#define WM8776_HPMASTER 0x02
+#define WM8776_DACLVOL 0x03
+#define WM8776_DACRVOL 0x04
+#define WM8776_DACMASTER 0x05
+#define WM8776_PHASESWAP 0x06
+#define WM8776_DACCTRL1 0x07
+#define WM8776_DACMUTE 0x08
+#define WM8776_DACCTRL2 0x09
+#define WM8776_DACIFCTRL 0x0a
+#define WM8776_ADCIFCTRL 0x0b
+#define WM8776_MSTRCTRL 0x0c
+#define WM8776_PWRDOWN 0x0d
+#define WM8776_ADCLVOL 0x0e
+#define WM8776_ADCRVOL 0x0f
+#define WM8776_ALCCTRL1 0x10
+#define WM8776_ALCCTRL2 0x11
+#define WM8776_ALCCTRL3 0x12
+#define WM8776_NOISEGATE 0x13
+#define WM8776_LIMITER 0x14
+#define WM8776_ADCMUX 0x15
+#define WM8776_OUTMUX 0x16
+#define WM8776_RESET 0x17
+
+
+/* HPLVOL/HPRVOL/HPMASTER */
+#define WM8776_HPATT_MASK 0x07f
+#define WM8776_HPZCEN 0x080
+#define WM8776_UPDATE 0x100
+
+/* DACLVOL/DACRVOL/DACMASTER */
+#define WM8776_DATT_MASK 0x0ff
+/*#define WM8776_UPDATE 0x100*/
+
+/* PHASESWAP */
+#define WM8776_PH_MASK 0x003
+
+/* DACCTRL1 */
+#define WM8776_DZCEN 0x001
+#define WM8776_ATC 0x002
+#define WM8776_IZD 0x004
+#define WM8776_TOD 0x008
+#define WM8776_PL_LEFT_MASK 0x030
+#define WM8776_PL_LEFT_MUTE 0x000
+#define WM8776_PL_LEFT_LEFT 0x010
+#define WM8776_PL_LEFT_RIGHT 0x020
+#define WM8776_PL_LEFT_LRMIX 0x030
+#define WM8776_PL_RIGHT_MASK 0x0c0
+#define WM8776_PL_RIGHT_MUTE 0x000
+#define WM8776_PL_RIGHT_LEFT 0x040
+#define WM8776_PL_RIGHT_RIGHT 0x080
+#define WM8776_PL_RIGHT_LRMIX 0x0c0
+
+/* DACMUTE */
+#define WM8776_DMUTE 0x001
+
+/* DACCTRL2 */
+#define WM8776_DEEMPH 0x001
+#define WM8776_DZFM_MASK 0x006
+#define WM8776_DZFM_NONE 0x000
+#define WM8776_DZFM_LR 0x002
+#define WM8776_DZFM_BOTH 0x004
+#define WM8776_DZFM_EITHER 0x006
+
+/* DACIFCTRL */
+#define WM8776_DACFMT_MASK 0x003
+#define WM8776_DACFMT_RJUST 0x000
+#define WM8776_DACFMT_LJUST 0x001
+#define WM8776_DACFMT_I2S 0x002
+#define WM8776_DACFMT_DSP 0x003
+#define WM8776_DACLRP 0x004
+#define WM8776_DACBCP 0x008
+#define WM8776_DACWL_MASK 0x030
+#define WM8776_DACWL_16 0x000
+#define WM8776_DACWL_20 0x010
+#define WM8776_DACWL_24 0x020
+#define WM8776_DACWL_32 0x030
+
+/* ADCIFCTRL */
+#define WM8776_ADCFMT_MASK 0x003
+#define WM8776_ADCFMT_RJUST 0x000
+#define WM8776_ADCFMT_LJUST 0x001
+#define WM8776_ADCFMT_I2S 0x002
+#define WM8776_ADCFMT_DSP 0x003
+#define WM8776_ADCLRP 0x004
+#define WM8776_ADCBCP 0x008
+#define WM8776_ADCWL_MASK 0x030
+#define WM8776_ADCWL_16 0x000
+#define WM8776_ADCWL_20 0x010
+#define WM8776_ADCWL_24 0x020
+#define WM8776_ADCWL_32 0x030
+#define WM8776_ADCMCLK 0x040
+#define WM8776_ADCHPD 0x100
+
+/* MSTRCTRL */
+#define WM8776_ADCRATE_MASK 0x007
+#define WM8776_ADCRATE_256 0x002
+#define WM8776_ADCRATE_384 0x003
+#define WM8776_ADCRATE_512 0x004
+#define WM8776_ADCRATE_768 0x005
+#define WM8776_ADCOSR 0x008
+#define WM8776_DACRATE_MASK 0x070
+#define WM8776_DACRATE_128 0x000
+#define WM8776_DACRATE_192 0x010
+#define WM8776_DACRATE_256 0x020
+#define WM8776_DACRATE_384 0x030
+#define WM8776_DACRATE_512 0x040
+#define WM8776_DACRATE_768 0x050
+#define WM8776_DACMS 0x080
+#define WM8776_ADCMS 0x100
+
+/* PWRDOWN */
+#define WM8776_PDWN 0x001
+#define WM8776_ADCPD 0x002
+#define WM8776_DACPD 0x004
+#define WM8776_HPPD 0x008
+#define WM8776_AINPD 0x040
+
+/* ADCLVOL/ADCRVOL */
+#define WM8776_AGMASK 0x0ff
+#define WM8776_ZCA 0x100
+
+/* ALCCTRL1 */
+#define WM8776_LCT_MASK 0x00f
+#define WM8776_MAXGAIN_MASK 0x070
+#define WM8776_LCSEL_MASK 0x180
+#define WM8776_LCSEL_LIMITER 0x000
+#define WM8776_LCSEL_ALC_RIGHT 0x080
+#define WM8776_LCSEL_ALC_LEFT 0x100
+#define WM8776_LCSEL_ALC_STEREO 0x180
+
+/* ALCCTRL2 */
+#define WM8776_HLD_MASK 0x00f
+#define WM8776_ALCZC 0x080
+#define WM8776_LCEN 0x100
+
+/* ALCCTRL3 */
+#define WM8776_ATK_MASK 0x00f
+#define WM8776_DCY_MASK 0x0f0
+
+/* NOISEGATE */
+#define WM8776_NGAT 0x001
+#define WM8776_NGTH_MASK 0x01c
+
+/* LIMITER */
+#define WM8776_MAXATTEN_MASK 0x00f
+#define WM8776_TRANWIN_MASK 0x070
+
+/* ADCMUX */
+#define WM8776_AMX_MASK 0x01f
+#define WM8776_MUTERA 0x040
+#define WM8776_MUTELA 0x080
+#define WM8776_LRBOTH 0x100
+
+/* OUTMUX */
+#define WM8776_MX_DAC 0x001
+#define WM8776_MX_AUX 0x002
+#define WM8776_MX_BYPASS 0x004
+
+#endif
diff --git a/sound/pci/oxygen/xonar.h b/sound/pci/oxygen/xonar.h
index 89b3ed8..b35343b 100644
--- a/sound/pci/oxygen/xonar.h
+++ b/sound/pci/oxygen/xonar.h
@@ -35,6 +35,8 @@
const struct pci_device_id *id);
int get_xonar_cs43xx_model(struct oxygen *chip,
const struct pci_device_id *id);
+int get_xonar_wm87x6_model(struct oxygen *chip,
+ const struct pci_device_id *id);
/* HDMI helper functions */
diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c
new file mode 100644
index 0000000..7754db1
--- /dev/null
+++ b/sound/pci/oxygen/xonar_wm87x6.c
@@ -0,0 +1,1021 @@
+/*
+ * card driver for models with WM8776/WM8766 DACs (Xonar DS)
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Xonar DS
+ * --------
+ *
+ * CMI8788:
+ *
+ * SPI 0 -> WM8766 (surround, center/LFE, back)
+ * SPI 1 -> WM8776 (front, input)
+ *
+ * GPIO 4 <- headphone detect
+ * GPIO 6 -> route input jack to input 1/2 (1/0)
+ * GPIO 7 -> enable output to speakers
+ * GPIO 8 -> enable output to speakers
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include "xonar.h"
+#include "wm8776.h"
+#include "wm8766.h"
+
+#define GPIO_DS_HP_DETECT 0x0010
+#define GPIO_DS_INPUT_ROUTE 0x0040
+#define GPIO_DS_OUTPUT_ENABLE 0x0180
+
+#define LC_CONTROL_LIMITER 0x40000000
+#define LC_CONTROL_ALC 0x20000000
+
+struct xonar_wm87x6 {
+ struct xonar_generic generic;
+ u16 wm8776_regs[0x17];
+ u16 wm8766_regs[0x10];
+ struct snd_kcontrol *lc_controls[13];
+};
+
+static void wm8776_write(struct oxygen *chip,
+ unsigned int reg, unsigned int value)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER |
+ OXYGEN_SPI_DATA_LENGTH_2 |
+ OXYGEN_SPI_CLOCK_160 |
+ (1 << OXYGEN_SPI_CODEC_SHIFT) |
+ OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
+ (reg << 9) | value);
+ if (reg < ARRAY_SIZE(data->wm8776_regs)) {
+ if (reg >= WM8776_HPLVOL || reg <= WM8776_DACMASTER)
+ value &= ~WM8776_UPDATE;
+ data->wm8776_regs[reg] = value;
+ }
+}
+
+static void wm8776_write_cached(struct oxygen *chip,
+ unsigned int reg, unsigned int value)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ if (reg >= ARRAY_SIZE(data->wm8776_regs) ||
+ value != data->wm8776_regs[reg])
+ wm8776_write(chip, reg, value);
+}
+
+static void wm8766_write(struct oxygen *chip,
+ unsigned int reg, unsigned int value)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER |
+ OXYGEN_SPI_DATA_LENGTH_2 |
+ OXYGEN_SPI_CLOCK_160 |
+ (0 << OXYGEN_SPI_CODEC_SHIFT) |
+ OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
+ (reg << 9) | value);
+ if (reg < ARRAY_SIZE(data->wm8766_regs))
+ data->wm8766_regs[reg] = value;
+}
+
+static void wm8766_write_cached(struct oxygen *chip,
+ unsigned int reg, unsigned int value)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ if (reg >= ARRAY_SIZE(data->wm8766_regs) ||
+ value != data->wm8766_regs[reg]) {
+ if ((reg >= WM8766_LDA1 && reg <= WM8766_RDA1) ||
+ (reg >= WM8766_LDA2 && reg <= WM8766_MASTDA))
+ value &= ~WM8766_UPDATE;
+ wm8766_write(chip, reg, value);
+ }
+}
+
+static void wm8776_registers_init(struct oxygen *chip)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ wm8776_write(chip, WM8776_RESET, 0);
+ wm8776_write(chip, WM8776_DACCTRL1, WM8776_DZCEN |
+ WM8776_PL_LEFT_LEFT | WM8776_PL_RIGHT_RIGHT);
+ wm8776_write(chip, WM8776_DACMUTE, chip->dac_mute ? WM8776_DMUTE : 0);
+ wm8776_write(chip, WM8776_DACIFCTRL,
+ WM8776_DACFMT_LJUST | WM8776_DACWL_24);
+ wm8776_write(chip, WM8776_ADCIFCTRL,
+ data->wm8776_regs[WM8776_ADCIFCTRL]);
+ wm8776_write(chip, WM8776_MSTRCTRL, data->wm8776_regs[WM8776_MSTRCTRL]);
+ wm8776_write(chip, WM8776_PWRDOWN, data->wm8776_regs[WM8776_PWRDOWN]);
+ wm8776_write(chip, WM8776_HPLVOL, data->wm8776_regs[WM8776_HPLVOL]);
+ wm8776_write(chip, WM8776_HPRVOL, data->wm8776_regs[WM8776_HPRVOL] |
+ WM8776_UPDATE);
+ wm8776_write(chip, WM8776_ADCLVOL, data->wm8776_regs[WM8776_ADCLVOL]);
+ wm8776_write(chip, WM8776_ADCRVOL, data->wm8776_regs[WM8776_ADCRVOL]);
+ wm8776_write(chip, WM8776_ADCMUX, data->wm8776_regs[WM8776_ADCMUX]);
+ wm8776_write(chip, WM8776_DACLVOL, chip->dac_volume[0]);
+ wm8776_write(chip, WM8776_DACRVOL, chip->dac_volume[1] | WM8776_UPDATE);
+}
+
+static void wm8766_registers_init(struct oxygen *chip)
+{
+ wm8766_write(chip, WM8766_RESET, 0);
+ wm8766_write(chip, WM8766_INT_CTRL, WM8766_FMT_LJUST | WM8766_IWL_24);
+ wm8766_write(chip, WM8766_DAC_CTRL2,
+ WM8766_ZCD | (chip->dac_mute ? WM8766_DMUTE_MASK : 0));
+ wm8766_write(chip, WM8766_LDA1, chip->dac_volume[2]);
+ wm8766_write(chip, WM8766_RDA1, chip->dac_volume[3]);
+ wm8766_write(chip, WM8766_LDA2, chip->dac_volume[4]);
+ wm8766_write(chip, WM8766_RDA2, chip->dac_volume[5]);
+ wm8766_write(chip, WM8766_LDA3, chip->dac_volume[6]);
+ wm8766_write(chip, WM8766_RDA3, chip->dac_volume[7] | WM8766_UPDATE);
+}
+
+static void wm8776_init(struct oxygen *chip)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ data->wm8776_regs[WM8776_HPLVOL] = (0x79 - 60) | WM8776_HPZCEN;
+ data->wm8776_regs[WM8776_HPRVOL] = (0x79 - 60) | WM8776_HPZCEN;
+ data->wm8776_regs[WM8776_ADCIFCTRL] =
+ WM8776_ADCFMT_LJUST | WM8776_ADCWL_24 | WM8776_ADCMCLK;
+ data->wm8776_regs[WM8776_MSTRCTRL] =
+ WM8776_ADCRATE_256 | WM8776_DACRATE_256;
+ data->wm8776_regs[WM8776_PWRDOWN] = WM8776_HPPD;
+ data->wm8776_regs[WM8776_ADCLVOL] = 0xa5 | WM8776_ZCA;
+ data->wm8776_regs[WM8776_ADCRVOL] = 0xa5 | WM8776_ZCA;
+ data->wm8776_regs[WM8776_ADCMUX] = 0x001;
+ wm8776_registers_init(chip);
+}
+
+static void xonar_ds_init(struct oxygen *chip)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ data->generic.anti_pop_delay = 300;
+ data->generic.output_enable_bit = GPIO_DS_OUTPUT_ENABLE;
+
+ wm8776_init(chip);
+ wm8766_registers_init(chip);
+
+ oxygen_write16_masked(chip, OXYGEN_GPIO_CONTROL, GPIO_DS_INPUT_ROUTE,
+ GPIO_DS_HP_DETECT | GPIO_DS_INPUT_ROUTE);
+ oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, GPIO_DS_INPUT_ROUTE);
+ oxygen_set_bits16(chip, OXYGEN_GPIO_INTERRUPT_MASK, GPIO_DS_HP_DETECT);
+ chip->interrupt_mask |= OXYGEN_INT_GPIO;
+
+ xonar_enable_output(chip);
+
+ snd_component_add(chip->card, "WM8776");
+ snd_component_add(chip->card, "WM8766");
+}
+
+static void xonar_ds_cleanup(struct oxygen *chip)
+{
+ xonar_disable_output(chip);
+}
+
+static void xonar_ds_suspend(struct oxygen *chip)
+{
+ xonar_ds_cleanup(chip);
+}
+
+static void xonar_ds_resume(struct oxygen *chip)
+{
+ wm8776_registers_init(chip);
+ wm8766_registers_init(chip);
+ xonar_enable_output(chip);
+}
+
+static void wm8776_adc_hardware_filter(unsigned int channel,
+ struct snd_pcm_hardware *hardware)
+{
+ if (channel == PCM_A) {
+ hardware->rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000;
+ hardware->rate_max = 96000;
+ }
+}
+
+static void set_wm87x6_dac_params(struct oxygen *chip,
+ struct snd_pcm_hw_params *params)
+{
+}
+
+static void set_wm8776_adc_params(struct oxygen *chip,
+ struct snd_pcm_hw_params *params)
+{
+ u16 reg;
+
+ reg = WM8776_ADCRATE_256 | WM8776_DACRATE_256;
+ if (params_rate(params) > 48000)
+ reg |= WM8776_ADCOSR;
+ wm8776_write_cached(chip, WM8776_MSTRCTRL, reg);
+}
+
+static void update_wm8776_volume(struct oxygen *chip)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+ u8 to_change;
+
+ if (chip->dac_volume[0] == chip->dac_volume[1]) {
+ if (chip->dac_volume[0] != data->wm8776_regs[WM8776_DACLVOL] ||
+ chip->dac_volume[1] != data->wm8776_regs[WM8776_DACRVOL]) {
+ wm8776_write(chip, WM8776_DACMASTER,
+ chip->dac_volume[0] | WM8776_UPDATE);
+ data->wm8776_regs[WM8776_DACLVOL] = chip->dac_volume[0];
+ data->wm8776_regs[WM8776_DACRVOL] = chip->dac_volume[0];
+ }
+ } else {
+ to_change = (chip->dac_volume[0] !=
+ data->wm8776_regs[WM8776_DACLVOL]) << 0;
+ to_change |= (chip->dac_volume[1] !=
+ data->wm8776_regs[WM8776_DACLVOL]) << 1;
+ if (to_change & 1)
+ wm8776_write(chip, WM8776_DACLVOL, chip->dac_volume[0] |
+ ((to_change & 2) ? 0 : WM8776_UPDATE));
+ if (to_change & 2)
+ wm8776_write(chip, WM8776_DACRVOL,
+ chip->dac_volume[1] | WM8776_UPDATE);
+ }
+}
+
+static void update_wm87x6_volume(struct oxygen *chip)
+{
+ static const u8 wm8766_regs[6] = {
+ WM8766_LDA1, WM8766_RDA1,
+ WM8766_LDA2, WM8766_RDA2,
+ WM8766_LDA3, WM8766_RDA3,
+ };
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int i;
+ u8 to_change;
+
+ update_wm8776_volume(chip);
+ if (chip->dac_volume[2] == chip->dac_volume[3] &&
+ chip->dac_volume[2] == chip->dac_volume[4] &&
+ chip->dac_volume[2] == chip->dac_volume[5] &&
+ chip->dac_volume[2] == chip->dac_volume[6] &&
+ chip->dac_volume[2] == chip->dac_volume[7]) {
+ to_change = 0;
+ for (i = 0; i < 6; ++i)
+ if (chip->dac_volume[2] !=
+ data->wm8766_regs[wm8766_regs[i]])
+ to_change = 1;
+ if (to_change) {
+ wm8766_write(chip, WM8766_MASTDA,
+ chip->dac_volume[2] | WM8766_UPDATE);
+ for (i = 0; i < 6; ++i)
+ data->wm8766_regs[wm8766_regs[i]] =
+ chip->dac_volume[2];
+ }
+ } else {
+ to_change = 0;
+ for (i = 0; i < 6; ++i)
+ to_change |= (chip->dac_volume[2 + i] !=
+ data->wm8766_regs[wm8766_regs[i]]) << i;
+ for (i = 0; i < 6; ++i)
+ if (to_change & (1 << i))
+ wm8766_write(chip, wm8766_regs[i],
+ chip->dac_volume[2 + i] |
+ ((to_change & (0x3e << i))
+ ? 0 : WM8766_UPDATE));
+ }
+}
+
+static void update_wm8776_mute(struct oxygen *chip)
+{
+ wm8776_write_cached(chip, WM8776_DACMUTE,
+ chip->dac_mute ? WM8776_DMUTE : 0);
+}
+
+static void update_wm87x6_mute(struct oxygen *chip)
+{
+ update_wm8776_mute(chip);
+ wm8766_write_cached(chip, WM8766_DAC_CTRL2, WM8766_ZCD |
+ (chip->dac_mute ? WM8766_DMUTE_MASK : 0));
+}
+
+static void xonar_ds_gpio_changed(struct oxygen *chip)
+{
+ u16 bits;
+
+ bits = oxygen_read16(chip, OXYGEN_GPIO_DATA);
+ snd_printk(KERN_INFO "HP detect: %d\n", !!(bits & GPIO_DS_HP_DETECT));
+}
+
+static int wm8776_bit_switch_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ u16 bit = ctl->private_value & 0xffff;
+ unsigned int reg_index = (ctl->private_value >> 16) & 0xff;
+ bool invert = (ctl->private_value >> 24) & 1;
+
+ value->value.integer.value[0] =
+ ((data->wm8776_regs[reg_index] & bit) != 0) ^ invert;
+ return 0;
+}
+
+static int wm8776_bit_switch_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ u16 bit = ctl->private_value & 0xffff;
+ u16 reg_value;
+ unsigned int reg_index = (ctl->private_value >> 16) & 0xff;
+ bool invert = (ctl->private_value >> 24) & 1;
+ int changed;
+
+ mutex_lock(&chip->mutex);
+ reg_value = data->wm8776_regs[reg_index] & ~bit;
+ if (value->value.integer.value[0] ^ invert)
+ reg_value |= bit;
+ changed = reg_value != data->wm8776_regs[reg_index];
+ if (changed)
+ wm8776_write(chip, reg_index, reg_value);
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+static int wm8776_field_enum_info(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_info *info)
+{
+ static const char *const hld[16] = {
+ "0 ms", "2.67 ms", "5.33 ms", "10.6 ms",
+ "21.3 ms", "42.7 ms", "85.3 ms", "171 ms",
+ "341 ms", "683 ms", "1.37 s", "2.73 s",
+ "5.46 s", "10.9 s", "21.8 s", "43.7 s",
+ };
+ static const char *const atk_lim[11] = {
+ "0.25 ms", "0.5 ms", "1 ms", "2 ms",
+ "4 ms", "8 ms", "16 ms", "32 ms",
+ "64 ms", "128 ms", "256 ms",
+ };
+ static const char *const atk_alc[11] = {
+ "8.40 ms", "16.8 ms", "33.6 ms", "67.2 ms",
+ "134 ms", "269 ms", "538 ms", "1.08 s",
+ "2.15 s", "4.3 s", "8.6 s",
+ };
+ static const char *const dcy_lim[11] = {
+ "1.2 ms", "2.4 ms", "4.8 ms", "9.6 ms",
+ "19.2 ms", "38.4 ms", "76.8 ms", "154 ms",
+ "307 ms", "614 ms", "1.23 s",
+ };
+ static const char *const dcy_alc[11] = {
+ "33.5 ms", "67.0 ms", "134 ms", "268 ms",
+ "536 ms", "1.07 s", "2.14 s", "4.29 s",
+ "8.58 s", "17.2 s", "34.3 s",
+ };
+ static const char *const tranwin[8] = {
+ "0 us", "62.5 us", "125 us", "250 us",
+ "500 us", "1 ms", "2 ms", "4 ms",
+ };
+ u8 max;
+ const char *const *names;
+
+ max = (ctl->private_value >> 12) & 0xf;
+ info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ info->count = 1;
+ info->value.enumerated.items = max + 1;
+ if (info->value.enumerated.item > max)
+ info->value.enumerated.item = max;
+ switch ((ctl->private_value >> 24) & 0x1f) {
+ case WM8776_ALCCTRL2:
+ names = hld;
+ break;
+ case WM8776_ALCCTRL3:
+ if (((ctl->private_value >> 20) & 0xf) == 0) {
+ if (ctl->private_value & LC_CONTROL_LIMITER)
+ names = atk_lim;
+ else
+ names = atk_alc;
+ } else {
+ if (ctl->private_value & LC_CONTROL_LIMITER)
+ names = dcy_lim;
+ else
+ names = dcy_alc;
+ }
+ break;
+ case WM8776_LIMITER:
+ names = tranwin;
+ break;
+ default:
+ return -ENXIO;
+ }
+ strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+ return 0;
+}
+
+static int wm8776_field_volume_info(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_info *info)
+{
+ info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ info->count = 1;
+ info->value.integer.min = (ctl->private_value >> 8) & 0xf;
+ info->value.integer.max = (ctl->private_value >> 12) & 0xf;
+ return 0;
+}
+
+static void wm8776_field_set_from_ctl(struct snd_kcontrol *ctl)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int value, reg_index, mode;
+ u8 min, max, shift;
+ u16 mask, reg_value;
+ bool invert;
+
+ if ((data->wm8776_regs[WM8776_ALCCTRL1] & WM8776_LCSEL_MASK) ==
+ WM8776_LCSEL_LIMITER)
+ mode = LC_CONTROL_LIMITER;
+ else
+ mode = LC_CONTROL_ALC;
+ if (!(ctl->private_value & mode))
+ return;
+
+ value = ctl->private_value & 0xf;
+ min = (ctl->private_value >> 8) & 0xf;
+ max = (ctl->private_value >> 12) & 0xf;
+ mask = (ctl->private_value >> 16) & 0xf;
+ shift = (ctl->private_value >> 20) & 0xf;
+ reg_index = (ctl->private_value >> 24) & 0x1f;
+ invert = (ctl->private_value >> 29) & 0x1;
+
+ if (invert)
+ value = max - (value - min);
+ reg_value = data->wm8776_regs[reg_index];
+ reg_value &= ~(mask << shift);
+ reg_value |= value << shift;
+ wm8776_write_cached(chip, reg_index, reg_value);
+}
+
+static int wm8776_field_set(struct snd_kcontrol *ctl, unsigned int value)
+{
+ struct oxygen *chip = ctl->private_data;
+ u8 min, max;
+ int changed;
+
+ min = (ctl->private_value >> 8) & 0xf;
+ max = (ctl->private_value >> 12) & 0xf;
+ if (value < min || value > max)
+ return -EINVAL;
+ mutex_lock(&chip->mutex);
+ changed = value != (ctl->private_value & 0xf);
+ if (changed) {
+ ctl->private_value = (ctl->private_value & ~0xf) | value;
+ wm8776_field_set_from_ctl(ctl);
+ }
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+static int wm8776_field_enum_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ value->value.enumerated.item[0] = ctl->private_value & 0xf;
+ return 0;
+}
+
+static int wm8776_field_volume_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ value->value.integer.value[0] = ctl->private_value & 0xf;
+ return 0;
+}
+
+static int wm8776_field_enum_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ return wm8776_field_set(ctl, value->value.enumerated.item[0]);
+}
+
+static int wm8776_field_volume_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ return wm8776_field_set(ctl, value->value.integer.value[0]);
+}
+
+static int wm8776_hp_vol_info(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_info *info)
+{
+ info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ info->count = 2;
+ info->value.integer.min = 0x79 - 60;
+ info->value.integer.max = 0x7f;
+ return 0;
+}
+
+static int wm8776_hp_vol_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ mutex_lock(&chip->mutex);
+ value->value.integer.value[0] =
+ data->wm8776_regs[WM8776_HPLVOL] & WM8776_HPATT_MASK;
+ value->value.integer.value[1] =
+ data->wm8776_regs[WM8776_HPRVOL] & WM8776_HPATT_MASK;
+ mutex_unlock(&chip->mutex);
+ return 0;
+}
+
+static int wm8776_hp_vol_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ u8 to_update;
+
+ mutex_lock(&chip->mutex);
+ to_update = (value->value.integer.value[0] !=
+ (data->wm8776_regs[WM8776_HPLVOL] & WM8776_HPATT_MASK))
+ << 0;
+ to_update |= (value->value.integer.value[1] !=
+ (data->wm8776_regs[WM8776_HPRVOL] & WM8776_HPATT_MASK))
+ << 1;
+ if (value->value.integer.value[0] == value->value.integer.value[1]) {
+ if (to_update) {
+ wm8776_write(chip, WM8776_HPMASTER,
+ value->value.integer.value[0] |
+ WM8776_HPZCEN | WM8776_UPDATE);
+ data->wm8776_regs[WM8776_HPLVOL] =
+ value->value.integer.value[0] | WM8776_HPZCEN;
+ data->wm8776_regs[WM8776_HPRVOL] =
+ value->value.integer.value[0] | WM8776_HPZCEN;
+ }
+ } else {
+ if (to_update & 1)
+ wm8776_write(chip, WM8776_HPLVOL,
+ value->value.integer.value[0] |
+ WM8776_HPZCEN |
+ ((to_update & 2) ? 0 : WM8776_UPDATE));
+ if (to_update & 2)
+ wm8776_write(chip, WM8776_HPRVOL,
+ value->value.integer.value[1] |
+ WM8776_HPZCEN | WM8776_UPDATE);
+ }
+ mutex_unlock(&chip->mutex);
+ return to_update != 0;
+}
+
+static int wm8776_input_mux_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int mux_bit = ctl->private_value;
+
+ value->value.integer.value[0] =
+ !!(data->wm8776_regs[WM8776_ADCMUX] & mux_bit);
+ return 0;
+}
+
+static int wm8776_input_mux_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int mux_bit = ctl->private_value;
+ u16 reg;
+ int changed;
+
+ mutex_lock(&chip->mutex);
+ reg = data->wm8776_regs[WM8776_ADCMUX];
+ if (value->value.integer.value[0]) {
+ reg &= ~0x003;
+ reg |= mux_bit;
+ } else
+ reg &= ~mux_bit;
+ changed = reg != data->wm8776_regs[WM8776_ADCMUX];
+ if (changed) {
+ oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
+ reg & 1 ? GPIO_DS_INPUT_ROUTE : 0,
+ GPIO_DS_INPUT_ROUTE);
+ wm8776_write(chip, WM8776_ADCMUX, reg);
+ }
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+static int wm8776_input_vol_info(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_info *info)
+{
+ info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ info->count = 2;
+ info->value.integer.min = 0xa5;
+ info->value.integer.max = 0xff;
+ return 0;
+}
+
+static int wm8776_input_vol_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ mutex_lock(&chip->mutex);
+ value->value.integer.value[0] =
+ data->wm8776_regs[WM8776_ADCLVOL] & WM8776_AGMASK;
+ value->value.integer.value[1] =
+ data->wm8776_regs[WM8776_ADCRVOL] & WM8776_AGMASK;
+ mutex_unlock(&chip->mutex);
+ return 0;
+}
+
+static int wm8776_input_vol_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ int changed = 0;
+
+ mutex_lock(&chip->mutex);
+ changed = (value->value.integer.value[0] !=
+ (data->wm8776_regs[WM8776_ADCLVOL] & WM8776_AGMASK)) ||
+ (value->value.integer.value[1] !=
+ (data->wm8776_regs[WM8776_ADCRVOL] & WM8776_AGMASK));
+ wm8776_write_cached(chip, WM8776_ADCLVOL,
+ value->value.integer.value[0] | WM8776_ZCA);
+ wm8776_write_cached(chip, WM8776_ADCRVOL,
+ value->value.integer.value[1] | WM8776_ZCA);
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+static int wm8776_level_control_info(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_info *info)
+{
+ static const char *const names[3] = {
+ "None", "Peak Limiter", "Automatic Level Control"
+ };
+ info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ info->count = 1;
+ info->value.enumerated.items = 3;
+ if (info->value.enumerated.item >= 3)
+ info->value.enumerated.item = 2;
+ strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+ return 0;
+}
+
+static int wm8776_level_control_get(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ if (!(data->wm8776_regs[WM8776_ALCCTRL2] & WM8776_LCEN))
+ value->value.enumerated.item[0] = 0;
+ else if ((data->wm8776_regs[WM8776_ALCCTRL1] & WM8776_LCSEL_MASK) ==
+ WM8776_LCSEL_LIMITER)
+ value->value.enumerated.item[0] = 1;
+ else
+ value->value.enumerated.item[0] = 2;
+ return 0;
+}
+
+static void activate_control(struct oxygen *chip,
+ struct snd_kcontrol *ctl, unsigned int mode)
+{
+ unsigned int access;
+
+ if (ctl->private_value & mode)
+ access = 0;
+ else
+ access = SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ if ((ctl->vd[0].access & SNDRV_CTL_ELEM_ACCESS_INACTIVE) != access) {
+ ctl->vd[0].access ^= SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
+ }
+}
+
+static int wm8776_level_control_put(struct snd_kcontrol *ctl,
+ struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int mode = 0, i;
+ u16 ctrl1, ctrl2;
+ int changed;
+
+ if (value->value.enumerated.item[0] >= 3)
+ return -EINVAL;
+ mutex_lock(&chip->mutex);
+ changed = value->value.enumerated.item[0] != ctl->private_value;
+ if (changed) {
+ ctl->private_value = value->value.enumerated.item[0];
+ ctrl1 = data->wm8776_regs[WM8776_ALCCTRL1];
+ ctrl2 = data->wm8776_regs[WM8776_ALCCTRL2];
+ switch (value->value.enumerated.item[0]) {
+ default:
+ wm8776_write_cached(chip, WM8776_ALCCTRL2,
+ ctrl2 & ~WM8776_LCEN);
+ break;
+ case 1:
+ wm8776_write_cached(chip, WM8776_ALCCTRL1,
+ (ctrl1 & ~WM8776_LCSEL_MASK) |
+ WM8776_LCSEL_LIMITER);
+ wm8776_write_cached(chip, WM8776_ALCCTRL2,
+ ctrl2 | WM8776_LCEN);
+ mode = LC_CONTROL_LIMITER;
+ break;
+ case 2:
+ wm8776_write_cached(chip, WM8776_ALCCTRL1,
+ (ctrl1 & ~WM8776_LCSEL_MASK) |
+ WM8776_LCSEL_ALC_STEREO);
+ wm8776_write_cached(chip, WM8776_ALCCTRL2,
+ ctrl2 | WM8776_LCEN);
+ mode = LC_CONTROL_ALC;
+ break;
+ }
+ for (i = 0; i < ARRAY_SIZE(data->lc_controls); ++i)
+ activate_control(chip, data->lc_controls[i], mode);
+ }
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+static int hpf_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info)
+{
+ static const char *const names[2] = {
+ "None", "High-pass Filter"
+ };
+
+ info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ info->count = 1;
+ info->value.enumerated.items = 2;
+ if (info->value.enumerated.item >= 2)
+ info->value.enumerated.item = 1;
+ strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+ return 0;
+}
+
+static int hpf_get(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+
+ value->value.enumerated.item[0] =
+ !(data->wm8776_regs[WM8776_ADCIFCTRL] & WM8776_ADCHPD);
+ return 0;
+}
+
+static int hpf_put(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
+{
+ struct oxygen *chip = ctl->private_data;
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int reg;
+ int changed;
+
+ mutex_lock(&chip->mutex);
+ reg = data->wm8776_regs[WM8776_ADCIFCTRL] & ~WM8776_ADCHPD;
+ if (!value->value.enumerated.item[0])
+ reg |= WM8776_ADCHPD;
+ changed = reg != data->wm8776_regs[WM8776_ADCIFCTRL];
+ if (changed)
+ wm8776_write(chip, WM8776_ADCIFCTRL, reg);
+ mutex_unlock(&chip->mutex);
+ return changed;
+}
+
+#define WM8776_BIT_SWITCH(xname, reg, bit, invert, flags) { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .info = snd_ctl_boolean_mono_info, \
+ .get = wm8776_bit_switch_get, \
+ .put = wm8776_bit_switch_put, \
+ .private_value = ((reg) << 16) | (bit) | ((invert) << 24) | (flags), \
+}
+#define _WM8776_FIELD_CTL(xname, reg, shift, initval, min, max, mask, flags) \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .private_value = (initval) | ((min) << 8) | ((max) << 12) | \
+ ((mask) << 16) | ((shift) << 20) | ((reg) << 24) | (flags)
+#define WM8776_FIELD_CTL_ENUM(xname, reg, shift, init, min, max, mask, flags) {\
+ _WM8776_FIELD_CTL(xname " Capture Enum", \
+ reg, shift, init, min, max, mask, flags), \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE, \
+ .info = wm8776_field_enum_info, \
+ .get = wm8776_field_enum_get, \
+ .put = wm8776_field_enum_put, \
+}
+#define WM8776_FIELD_CTL_VOLUME(a, b, c, d, e, f, g, h, tlv_p) { \
+ _WM8776_FIELD_CTL(a " Capture Volume", b, c, d, e, f, g, h), \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE | \
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+ .info = wm8776_field_volume_info, \
+ .get = wm8776_field_volume_get, \
+ .put = wm8776_field_volume_put, \
+ .tlv = { .p = tlv_p }, \
+}
+
+static const DECLARE_TLV_DB_SCALE(wm87x6_dac_db_scale, -6000, 50, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_adc_db_scale, -2100, 50, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_hp_db_scale, -6000, 100, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_lct_db_scale, -1600, 100, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_maxgain_db_scale, 0, 400, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_ngth_db_scale, -7800, 600, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_maxatten_lim_db_scale, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(wm8776_maxatten_alc_db_scale, -2100, 400, 0);
+
+static const struct snd_kcontrol_new ds_controls[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Headphone Playback Volume",
+ .info = wm8776_hp_vol_info,
+ .get = wm8776_hp_vol_get,
+ .put = wm8776_hp_vol_put,
+ .tlv = { .p = wm8776_hp_db_scale },
+ },
+ WM8776_BIT_SWITCH("Headphone Playback Switch",
+ WM8776_PWRDOWN, WM8776_HPPD, 1, 0),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Capture Volume",
+ .info = wm8776_input_vol_info,
+ .get = wm8776_input_vol_get,
+ .put = wm8776_input_vol_put,
+ .tlv = { .p = wm8776_adc_db_scale },
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line Capture Switch",
+ .info = snd_ctl_boolean_mono_info,
+ .get = wm8776_input_mux_get,
+ .put = wm8776_input_mux_put,
+ .private_value = 1 << 0,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Capture Switch",
+ .info = snd_ctl_boolean_mono_info,
+ .get = wm8776_input_mux_get,
+ .put = wm8776_input_mux_put,
+ .private_value = 1 << 1,
+ },
+ WM8776_BIT_SWITCH("Aux", WM8776_ADCMUX, 1 << 2, 0, 0),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "ADC Filter Capture Enum",
+ .info = hpf_info,
+ .get = hpf_get,
+ .put = hpf_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Level Control Capture Enum",
+ .info = wm8776_level_control_info,
+ .get = wm8776_level_control_get,
+ .put = wm8776_level_control_put,
+ .private_value = 0,
+ },
+};
+static const struct snd_kcontrol_new lc_controls[] = {
+ WM8776_FIELD_CTL_VOLUME("Limiter Threshold",
+ WM8776_ALCCTRL1, 0, 11, 0, 15, 0xf,
+ LC_CONTROL_LIMITER, wm8776_lct_db_scale),
+ WM8776_FIELD_CTL_ENUM("Limiter Attack Time",
+ WM8776_ALCCTRL3, 0, 2, 0, 10, 0xf,
+ LC_CONTROL_LIMITER),
+ WM8776_FIELD_CTL_ENUM("Limiter Decay Time",
+ WM8776_ALCCTRL3, 4, 3, 0, 10, 0xf,
+ LC_CONTROL_LIMITER),
+ WM8776_FIELD_CTL_ENUM("Limiter Transient Window",
+ WM8776_LIMITER, 4, 2, 0, 7, 0x7,
+ LC_CONTROL_LIMITER),
+ WM8776_FIELD_CTL_VOLUME("Limiter Maximum Attenuation",
+ WM8776_LIMITER, 0, 6, 3, 12, 0xf,
+ LC_CONTROL_LIMITER,
+ wm8776_maxatten_lim_db_scale),
+ WM8776_FIELD_CTL_VOLUME("ALC Target Level",
+ WM8776_ALCCTRL1, 0, 11, 0, 15, 0xf,
+ LC_CONTROL_ALC, wm8776_lct_db_scale),
+ WM8776_FIELD_CTL_ENUM("ALC Attack Time",
+ WM8776_ALCCTRL3, 0, 2, 0, 10, 0xf,
+ LC_CONTROL_ALC),
+ WM8776_FIELD_CTL_ENUM("ALC Decay Time",
+ WM8776_ALCCTRL3, 4, 3, 0, 10, 0xf,
+ LC_CONTROL_ALC),
+ WM8776_FIELD_CTL_VOLUME("ALC Maximum Gain",
+ WM8776_ALCCTRL1, 4, 7, 1, 7, 0x7,
+ LC_CONTROL_ALC, wm8776_maxgain_db_scale),
+ WM8776_FIELD_CTL_VOLUME("ALC Maximum Attenuation",
+ WM8776_LIMITER, 0, 10, 10, 15, 0xf,
+ LC_CONTROL_ALC, wm8776_maxatten_alc_db_scale),
+ WM8776_FIELD_CTL_ENUM("ALC Hold Time",
+ WM8776_ALCCTRL2, 0, 0, 0, 15, 0xf,
+ LC_CONTROL_ALC),
+ WM8776_BIT_SWITCH("Noise Gate Capture Switch",
+ WM8776_NOISEGATE, WM8776_NGAT, 0,
+ LC_CONTROL_ALC),
+ WM8776_FIELD_CTL_VOLUME("Noise Gate Threshold",
+ WM8776_NOISEGATE, 2, 0, 0, 7, 0x7,
+ LC_CONTROL_ALC, wm8776_ngth_db_scale),
+};
+
+static int xonar_ds_control_filter(struct snd_kcontrol_new *template)
+{
+ if (!strncmp(template->name, "CD Capture ", 11))
+ return 1; /* no CD input */
+ return 0;
+}
+
+static int xonar_ds_mixer_init(struct oxygen *chip)
+{
+ struct xonar_wm87x6 *data = chip->model_data;
+ unsigned int i;
+ struct snd_kcontrol *ctl;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(ds_controls); ++i) {
+ ctl = snd_ctl_new1(&ds_controls[i], chip);
+ if (!ctl)
+ return -ENOMEM;
+ err = snd_ctl_add(chip->card, ctl);
+ if (err < 0)
+ return err;
+ }
+ BUILD_BUG_ON(ARRAY_SIZE(lc_controls) != ARRAY_SIZE(data->lc_controls));
+ for (i = 0; i < ARRAY_SIZE(lc_controls); ++i) {
+ ctl = snd_ctl_new1(&lc_controls[i], chip);
+ if (!ctl)
+ return -ENOMEM;
+ err = snd_ctl_add(chip->card, ctl);
+ if (err < 0)
+ return err;
+ data->lc_controls[i] = ctl;
+ }
+ return 0;
+}
+
+static const struct oxygen_model model_xonar_ds = {
+ .shortname = "Xonar DS",
+ .longname = "Asus Virtuoso 200",
+ .chip = "AV200",
+ .init = xonar_ds_init,
+ .control_filter = xonar_ds_control_filter,
+ .mixer_init = xonar_ds_mixer_init,
+ .cleanup = xonar_ds_cleanup,
+ .suspend = xonar_ds_suspend,
+ .resume = xonar_ds_resume,
+ .pcm_hardware_filter = wm8776_adc_hardware_filter,
+ .get_i2s_mclk = oxygen_default_i2s_mclk,
+ .set_dac_params = set_wm87x6_dac_params,
+ .set_adc_params = set_wm8776_adc_params,
+ .update_dac_volume = update_wm87x6_volume,
+ .update_dac_mute = update_wm87x6_mute,
+ .gpio_changed = xonar_ds_gpio_changed,
+ .dac_tlv = wm87x6_dac_db_scale,
+ .model_data_size = sizeof(struct xonar_wm87x6),
+ .device_config = PLAYBACK_0_TO_I2S |
+ PLAYBACK_1_TO_SPDIF |
+ CAPTURE_0_FROM_I2S_1,
+ .dac_channels = 8,
+ .dac_volume_min = 255 - 2*60,
+ .dac_volume_max = 255,
+ .function_flags = OXYGEN_FUNCTION_SPI,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+};
+
+int __devinit get_xonar_wm87x6_model(struct oxygen *chip,
+ const struct pci_device_id *id)
+{
+ switch (id->subdevice) {
+ case 0x838e:
+ chip->model = model_xonar_ds;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 833e9c7..95cfde2 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -94,7 +94,7 @@
PCI_ID_LAST
};
-static struct pci_device_id pcxhr_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(pcxhr_ids) = {
{ 0x10b5, 0x9656, 0x1369, 0xb001, 0, 0, PCI_ID_VX882HR, },
{ 0x10b5, 0x9656, 0x1369, 0xb101, 0, 0, PCI_ID_PCX882HR, },
{ 0x10b5, 0x9656, 0x1369, 0xb201, 0, 0, PCI_ID_VX881HR, },
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index e66ef2b..960a227 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -506,7 +506,7 @@
/*
*/
-static struct pci_device_id snd_riptide_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_riptide_ids) = {
{ PCI_DEVICE(0x127a, 0x4310) },
{ PCI_DEVICE(0x127a, 0x4320) },
{ PCI_DEVICE(0x127a, 0x4330) },
@@ -515,7 +515,7 @@
};
#ifdef SUPPORT_JOYSTICK
-static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(snd_riptide_joystick_ids) = {
{ PCI_DEVICE(0x127a, 0x4312) },
{ PCI_DEVICE(0x127a, 0x4322) },
{ PCI_DEVICE(0x127a, 0x4332) },
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index f977dba..d5e1c6e 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -226,7 +226,7 @@
struct snd_kcontrol *spdif_ctl;
};
-static struct pci_device_id snd_rme32_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_rme32_ids) = {
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 2ba5c0f..9d5252b 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -231,7 +231,7 @@
struct snd_kcontrol *spdif_ctl;
};
-static struct pci_device_id snd_rme96_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_rme96_ids) = {
{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, },
{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, },
{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, },
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 7bb827c..52c6eb5 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -585,7 +585,7 @@
}
-static struct pci_device_id snd_hdsp_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_hdsp_ids) = {
{
.vendor = PCI_VENDOR_ID_XILINX,
.device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP,
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index a1b10d1..3d72c1e 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -512,7 +512,7 @@
};
-static struct pci_device_id snd_hdspm_ids[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(snd_hdspm_ids) = {
{
.vendor = PCI_VENDOR_ID_XILINX,
.device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI,
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index bc539ab..44a3e2d 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -314,7 +314,7 @@
}
-static struct pci_device_id snd_rme9652_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_rme9652_ids) = {
{
.vendor = 0x10ee,
.device = 0x3fc4,
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index 1a5ff06..7e3e8fb 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -48,7 +48,7 @@
module_param(enable, bool, 0444);
MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator.");
-static struct pci_device_id snd_sis7019_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) },
{ 0, }
};
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 1f6406c..337b9fa 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -242,7 +242,7 @@
#endif
};
-static struct pci_device_id snd_sonic_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_sonic_ids) = {
{ PCI_VDEVICE(S3, 0xca00), 0, },
{ 0, }
};
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index 21cef97..6d05818 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -62,7 +62,7 @@
module_param_array(wavetable_size, int, NULL, 0444);
MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
-static struct pci_device_id snd_trident_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_trident_ids) = {
{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX),
PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX),
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 8a332d2..7e494b6 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -401,7 +401,7 @@
#endif
};
-static struct pci_device_id snd_via82xx_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_via82xx_ids) = {
/* 0x1106, 0x3058 */
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, }, /* 686A */
/* 0x1106, 0x3059 */
@@ -1791,6 +1791,12 @@
.type = AC97_TUNE_HP_ONLY
},
{
+ .subvendor = 0x110a,
+ .subdevice = 0x0079,
+ .name = "Fujitsu Siemens D1289",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
.subvendor = 0x1019,
.subdevice = 0x0a81,
.name = "ECS K7VTA3",
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 47eb615..f7e8bbbe 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -260,7 +260,7 @@
struct snd_info_entry *proc_entry;
};
-static struct pci_device_id snd_via82xx_modem_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_via82xx_modem_ids) = {
{ PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, },
{ 0, }
};
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index fc9136c..99a9a81 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -60,7 +60,7 @@
VX_PCI_VX222_NEW
};
-static struct pci_device_id snd_vx222_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_vx222_ids) = {
{ 0x10b5, 0x9050, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_OLD, }, /* PLX */
{ 0x10b5, 0x9030, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_NEW, }, /* PLX */
{ 0, }
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index e6b18b9..80c6821 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -66,7 +66,7 @@
module_param_array(rear_switch, bool, NULL, 0444);
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
-static struct pci_device_id snd_ymfpci_ids[] = {
+static DEFINE_PCI_DEVICE_TABLE(snd_ymfpci_ids) = {
{ PCI_VDEVICE(YAMAHA, 0x0004), 0, }, /* YMF724 */
{ PCI_VDEVICE(YAMAHA, 0x000d), 0, }, /* YMF724F */
{ PCI_VDEVICE(YAMAHA, 0x000a), 0, }, /* YMF740 */
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
index 5cfa608..0d668f4 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
@@ -21,7 +21,6 @@
*/
#include <linux/slab.h>
-#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/asoundef.h>
@@ -29,49 +28,6 @@
/*
- * we use a vmalloc'ed (sg-)buffer
- */
-
-/* get the physical page pointer on the given offset */
-static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, unsigned long offset)
-{
- void *pageptr = subs->runtime->dma_area + offset;
- return vmalloc_to_page(pageptr);
-}
-
-/*
- * hw_params callback
- * NOTE: this may be called not only once per pcm open!
- */
-static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t size)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
- if (runtime->dma_area) {
- if (runtime->dma_bytes >= size)
- return 0; /* already enough large */
- vfree(runtime->dma_area);
- }
- runtime->dma_area = vmalloc_32_user(size);
- if (! runtime->dma_area)
- return -ENOMEM;
- runtime->dma_bytes = size;
- return 0;
-}
-
-/*
- * hw_free callback
- * NOTE: this may be called not only once per pcm open!
- */
-static int snd_pcm_free_vmalloc_buffer(struct snd_pcm_substream *subs)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
-
- vfree(runtime->dma_area);
- runtime->dma_area = NULL;
- return 0;
-}
-
-/*
* clear the SRAM contents
*/
static int pdacf_pcm_clear_sram(struct snd_pdacf *chip)
@@ -147,7 +103,8 @@
static int pdacf_pcm_hw_params(struct snd_pcm_substream *subs,
struct snd_pcm_hw_params *hw_params)
{
- return snd_pcm_alloc_vmalloc_buffer(subs, params_buffer_bytes(hw_params));
+ return snd_pcm_lib_alloc_vmalloc_32_buffer
+ (subs, params_buffer_bytes(hw_params));
}
/*
@@ -155,7 +112,7 @@
*/
static int pdacf_pcm_hw_free(struct snd_pcm_substream *subs)
{
- return snd_pcm_free_vmalloc_buffer(subs);
+ return snd_pcm_lib_free_vmalloc_buffer(subs);
}
/*
@@ -319,7 +276,8 @@
.prepare = pdacf_pcm_prepare,
.trigger = pdacf_pcm_trigger,
.pointer = pdacf_pcm_capture_pointer,
- .page = snd_pcm_get_vmalloc_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
diff --git a/sound/soc/blackfin/bf5xx-ac97-pcm.c b/sound/soc/blackfin/bf5xx-ac97-pcm.c
index cf0dfb7..67cbfe7 100644
--- a/sound/soc/blackfin/bf5xx-ac97-pcm.c
+++ b/sound/soc/blackfin/bf5xx-ac97-pcm.c
@@ -349,9 +349,7 @@
sport_handle->tx_dma_buf = dma_alloc_coherent(NULL, \
size, &sport_handle->tx_dma_phy, GFP_KERNEL);
if (!sport_handle->tx_dma_buf) {
- pr_err("Failed to allocate memory for tx dma \
- buf - Please increase uncached DMA \
- memory region\n");
+ pr_err("Failed to allocate memory for tx dma buf - Please increase uncached DMA memory region\n");
return -ENOMEM;
} else
memset(sport_handle->tx_dma_buf, 0, size);
@@ -362,9 +360,7 @@
sport_handle->rx_dma_buf = dma_alloc_coherent(NULL, \
size, &sport_handle->rx_dma_phy, GFP_KERNEL);
if (!sport_handle->rx_dma_buf) {
- pr_err("Failed to allocate memory for rx dma \
- buf - Please increase uncached DMA \
- memory region\n");
+ pr_err("Failed to allocate memory for rx dma buf - Please increase uncached DMA memory region\n");
return -ENOMEM;
} else
memset(sport_handle->rx_dma_buf, 0, size);
diff --git a/sound/soc/blackfin/bf5xx-i2s-pcm.c b/sound/soc/blackfin/bf5xx-i2s-pcm.c
index 62fbb84..c6c6a4a7 100644
--- a/sound/soc/blackfin/bf5xx-i2s-pcm.c
+++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c
@@ -207,8 +207,7 @@
buf->area = dma_alloc_coherent(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);
if (!buf->area) {
- pr_err("Failed to allocate dma memory \
- Please increase uncached DMA memory region\n");
+ pr_err("Failed to allocate dma memory - Please increase uncached DMA memory region\n");
return -ENOMEM;
}
buf->bytes = size;
diff --git a/sound/soc/blackfin/bf5xx-tdm-pcm.c b/sound/soc/blackfin/bf5xx-tdm-pcm.c
index a8c73cb..5e03bb2 100644
--- a/sound/soc/blackfin/bf5xx-tdm-pcm.c
+++ b/sound/soc/blackfin/bf5xx-tdm-pcm.c
@@ -244,8 +244,7 @@
buf->area = dma_alloc_coherent(pcm->card->dev, size * 4,
&buf->addr, GFP_KERNEL);
if (!buf->area) {
- pr_err("Failed to allocate dma memory \
- Please increase uncached DMA memory region\n");
+ pr_err("Failed to allocate dma memory - Please increase uncached DMA memory region\n");
return -ENOMEM;
}
buf->bytes = size;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 52b005f..1743d56 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -23,6 +23,7 @@
select SND_SOC_AK4671 if I2C
select SND_SOC_CS4270 if I2C
select SND_SOC_MAX9877 if I2C
+ select SND_SOC_DA7210 if I2C
select SND_SOC_PCM3008
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if I2C
@@ -35,6 +36,7 @@
select SND_SOC_TWL4030 if TWL4030_CORE
select SND_SOC_UDA134X
select SND_SOC_UDA1380 if I2C
+ select SND_SOC_WM2000 if I2C
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
@@ -49,14 +51,18 @@
select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
+ select SND_SOC_WM8904 if I2C
select SND_SOC_WM8940 if I2C
+ select SND_SOC_WM8955 if I2C
select SND_SOC_WM8960 if I2C
select SND_SOC_WM8961 if I2C
select SND_SOC_WM8971 if I2C
select SND_SOC_WM8974 if I2C
+ select SND_SOC_WM8978 if I2C
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
select SND_SOC_WM8993 if I2C
+ select SND_SOC_WM8994 if MFD_WM8994
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
@@ -112,6 +118,9 @@
config SND_SOC_CS4270
tristate
+config SND_SOC_DA7210
+ tristate
+
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
@@ -203,9 +212,15 @@
config SND_SOC_WM8903
tristate
+config SND_SOC_WM8904
+ tristate
+
config SND_SOC_WM8940
tristate
+config SND_SOC_WM8955
+ tristate
+
config SND_SOC_WM8960
tristate
@@ -218,6 +233,9 @@
config SND_SOC_WM8974
tristate
+config SND_SOC_WM8978
+ tristate
+
config SND_SOC_WM8988
tristate
@@ -227,6 +245,9 @@
config SND_SOC_WM8993
tristate
+config SND_SOC_WM8994
+ tristate
+
config SND_SOC_WM9081
tristate
@@ -245,3 +266,6 @@
config SND_SOC_TPA6130A2
tristate
+
+config SND_SOC_WM2000
+ tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index dbaecb1..dd5ce6d 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -10,6 +10,7 @@
snd-soc-ak4671-objs := ak4671.o
snd-soc-cs4270-objs := cs4270.o
snd-soc-cx20442-objs := cx20442.o
+snd-soc-da7210-objs := da7210.o
snd-soc-l3-objs := l3.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-spdif-objs := spdif_transciever.o
@@ -36,14 +37,18 @@
snd-soc-wm8776-objs := wm8776.o
snd-soc-wm8900-objs := wm8900.o
snd-soc-wm8903-objs := wm8903.o
+snd-soc-wm8904-objs := wm8904.o
snd-soc-wm8940-objs := wm8940.o
+snd-soc-wm8955-objs := wm8955.o
snd-soc-wm8960-objs := wm8960.o
snd-soc-wm8961-objs := wm8961.o
snd-soc-wm8971-objs := wm8971.o
snd-soc-wm8974-objs := wm8974.o
+snd-soc-wm8978-objs := wm8978.o
snd-soc-wm8988-objs := wm8988.o
snd-soc-wm8990-objs := wm8990.o
snd-soc-wm8993-objs := wm8993.o
+snd-soc-wm8994-objs := wm8994.o
snd-soc-wm9081-objs := wm9081.o
snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o
@@ -53,6 +58,7 @@
# Amp
snd-soc-max9877-objs := max9877.o
snd-soc-tpa6130a2-objs := tpa6130a2.o
+snd-soc-wm2000-objs := wm2000.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o
@@ -66,6 +72,7 @@
obj-$(CONFIG_SND_SOC_AK4671) += snd-soc-ak4671.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
+obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o
obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o
@@ -92,14 +99,18 @@
obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o
obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
-obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
-obj-$(CONFIG_SND_SOC_WM8974) += snd-soc-wm8974.o
+obj-$(CONFIG_SND_SOC_WM8904) += snd-soc-wm8904.o
obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o
+obj-$(CONFIG_SND_SOC_WM8955) += snd-soc-wm8955.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
obj-$(CONFIG_SND_SOC_WM8961) += snd-soc-wm8961.o
+obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8974) += snd-soc-wm8974.o
+obj-$(CONFIG_SND_SOC_WM8978) += snd-soc-wm8978.o
obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
obj-$(CONFIG_SND_SOC_WM8993) += snd-soc-wm8993.o
+obj-$(CONFIG_SND_SOC_WM8994) += snd-soc-wm8994.o
obj-$(CONFIG_SND_SOC_WM9081) += snd-soc-wm9081.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
@@ -109,3 +120,4 @@
# Amp
obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o
+obj-$(CONFIG_SND_SOC_WM2000) += snd-soc-wm2000.o
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
index 2c18e3d..3c80137 100644
--- a/sound/soc/codecs/ad1836.c
+++ b/sound/soc/codecs/ad1836.c
@@ -171,57 +171,35 @@
return 0;
}
-
-/*
- * interface to read/write ad1836 register
- */
-#define AD1836_SPI_REG_SHFT 12
-#define AD1836_SPI_READ (1 << 11)
-#define AD1836_SPI_VAL_MSK 0x3FF
-
-/*
- * write to the ad1836 register space
- */
-
-static int ad1836_write_reg(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
+#ifdef CONFIG_PM
+static int ad1836_soc_suspend(struct platform_device *pdev,
+ pm_message_t state)
{
- u16 *reg_cache = codec->reg_cache;
- int ret = 0;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
- if (value != reg_cache[reg]) {
- unsigned short buf;
- struct spi_transfer t = {
- .tx_buf = &buf,
- .len = 2,
- };
- struct spi_message m;
+ /* reset clock control mode */
+ u16 adc_ctrl2 = snd_soc_read(codec, AD1836_ADC_CTRL2);
+ adc_ctrl2 &= ~AD1836_ADC_SERFMT_MASK;
- buf = (reg << AD1836_SPI_REG_SHFT) |
- (value & AD1836_SPI_VAL_MSK);
- spi_message_init(&m);
- spi_message_add_tail(&t, &m);
- ret = spi_sync(codec->control_data, &m);
- if (ret == 0)
- reg_cache[reg] = value;
- }
-
- return ret;
+ return snd_soc_write(codec, AD1836_ADC_CTRL2, adc_ctrl2);
}
-/*
- * read from the ad1836 register space cache
- */
-static unsigned int ad1836_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
+static int ad1836_soc_resume(struct platform_device *pdev)
{
- u16 *reg_cache = codec->reg_cache;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
- if (reg >= codec->reg_cache_size)
- return -EINVAL;
+ /* restore clock control mode */
+ u16 adc_ctrl2 = snd_soc_read(codec, AD1836_ADC_CTRL2);
+ adc_ctrl2 |= AD1836_ADC_AUX;
- return reg_cache[reg];
+ return snd_soc_write(codec, AD1836_ADC_CTRL2, adc_ctrl2);
}
+#else
+#define ad1836_soc_suspend NULL
+#define ad1836_soc_resume NULL
+#endif
static int __devinit ad1836_spi_probe(struct spi_device *spi)
{
@@ -306,32 +284,38 @@
codec->owner = THIS_MODULE;
codec->dai = &ad1836_dai;
codec->num_dai = 1;
- codec->write = ad1836_write_reg;
- codec->read = ad1836_read_reg_cache;
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
ad1836_dai.dev = codec->dev;
ad1836_codec = codec;
+ ret = snd_soc_codec_set_cache_io(codec, 4, 12, SND_SOC_SPI);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to set cache I/O: %d\n",
+ ret);
+ kfree(ad1836);
+ return ret;
+ }
+
/* default setting for ad1836 */
/* de-emphasis: 48kHz, power-on dac */
- codec->write(codec, AD1836_DAC_CTRL1, 0x300);
+ snd_soc_write(codec, AD1836_DAC_CTRL1, 0x300);
/* unmute dac channels */
- codec->write(codec, AD1836_DAC_CTRL2, 0x0);
+ snd_soc_write(codec, AD1836_DAC_CTRL2, 0x0);
/* high-pass filter enable, power-on adc */
- codec->write(codec, AD1836_ADC_CTRL1, 0x100);
+ snd_soc_write(codec, AD1836_ADC_CTRL1, 0x100);
/* unmute adc channles, adc aux mode */
- codec->write(codec, AD1836_ADC_CTRL2, 0x180);
+ snd_soc_write(codec, AD1836_ADC_CTRL2, 0x180);
/* left/right diff:PGA/MUX */
- codec->write(codec, AD1836_ADC_CTRL3, 0x3A);
+ snd_soc_write(codec, AD1836_ADC_CTRL3, 0x3A);
/* volume */
- codec->write(codec, AD1836_DAC_L1_VOL, 0x3FF);
- codec->write(codec, AD1836_DAC_R1_VOL, 0x3FF);
- codec->write(codec, AD1836_DAC_L2_VOL, 0x3FF);
- codec->write(codec, AD1836_DAC_R2_VOL, 0x3FF);
- codec->write(codec, AD1836_DAC_L3_VOL, 0x3FF);
- codec->write(codec, AD1836_DAC_R3_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_L1_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_R1_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_L2_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_R2_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_L3_VOL, 0x3FF);
+ snd_soc_write(codec, AD1836_DAC_R3_VOL, 0x3FF);
ret = snd_soc_register_codec(codec);
if (ret != 0) {
@@ -404,6 +388,8 @@
struct snd_soc_codec_device soc_codec_dev_ad1836 = {
.probe = ad1836_probe,
.remove = ad1836_remove,
+ .suspend = ad1836_soc_suspend,
+ .resume = ad1836_soc_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ad1836);
diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h
index 7660ee6..e9d90d3 100644
--- a/sound/soc/codecs/ad1836.h
+++ b/sound/soc/codecs/ad1836.h
@@ -54,6 +54,7 @@
#define AD1836_ADC_SERFMT_MASK (7 << 6)
#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
+#define AD1836_ADC_AUX (0x6 << 6)
#define AD1836_ADC_CTRL3 14
diff --git a/sound/soc/codecs/ad1938.c b/sound/soc/codecs/ad1938.c
index 5d48918..c233810 100644
--- a/sound/soc/codecs/ad1938.c
+++ b/sound/soc/codecs/ad1938.c
@@ -46,6 +46,11 @@
u8 reg_cache[AD1938_NUM_REGS];
};
+/* ad1938 register cache & default register settings */
+static const u8 ad1938_reg[AD1938_NUM_REGS] = {
+ 0, 0, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0, 0,
+};
+
static struct snd_soc_codec *ad1938_codec;
struct snd_soc_codec_device soc_codec_dev_ad1938;
static int ad1938_register(struct ad1938_priv *ad1938);
@@ -97,6 +102,7 @@
static const struct snd_soc_dapm_widget ad1938_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC", "Playback", AD1938_DAC_CTRL0, 0, 1),
SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("PLL_PWR", AD1938_PLL_CLK_CTRL0, 0, 1, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC_PWR", AD1938_ADC_CTRL0, 0, 1, NULL, 0),
SND_SOC_DAPM_OUTPUT("DAC1OUT"),
SND_SOC_DAPM_OUTPUT("DAC2OUT"),
@@ -107,6 +113,8 @@
};
static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DAC", NULL, "PLL_PWR" },
+ { "ADC", NULL, "PLL_PWR" },
{ "DAC", NULL, "ADC_PWR" },
{ "ADC", NULL, "ADC_PWR" },
{ "DAC1OUT", "DAC1 Switch", "DAC" },
@@ -126,30 +134,20 @@
struct snd_soc_codec *codec = dai->codec;
int reg;
- reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = snd_soc_read(codec, AD1938_DAC_CTRL2);
reg = (mute > 0) ? reg | AD1938_DAC_MASTER_MUTE : reg &
(~AD1938_DAC_MASTER_MUTE);
- codec->write(codec, AD1938_DAC_CTRL2, reg);
-
- return 0;
-}
-
-static inline int ad1938_pll_powerctrl(struct snd_soc_codec *codec, int cmd)
-{
- int reg = codec->read(codec, AD1938_PLL_CLK_CTRL0);
- reg = (cmd > 0) ? reg & (~AD1938_PLL_POWERDOWN) : reg |
- AD1938_PLL_POWERDOWN;
- codec->write(codec, AD1938_PLL_CLK_CTRL0, reg);
+ snd_soc_write(codec, AD1938_DAC_CTRL2, reg);
return 0;
}
static int ad1938_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
- unsigned int mask, int slots, int width)
+ unsigned int rx_mask, int slots, int width)
{
struct snd_soc_codec *codec = dai->codec;
- int dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
- int adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
+ int dac_reg = snd_soc_read(codec, AD1938_DAC_CTRL1);
+ int adc_reg = snd_soc_read(codec, AD1938_ADC_CTRL2);
dac_reg &= ~AD1938_DAC_CHAN_MASK;
adc_reg &= ~AD1938_ADC_CHAN_MASK;
@@ -175,8 +173,8 @@
return -EINVAL;
}
- codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
- codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
+ snd_soc_write(codec, AD1938_DAC_CTRL1, dac_reg);
+ snd_soc_write(codec, AD1938_ADC_CTRL2, adc_reg);
return 0;
}
@@ -187,8 +185,8 @@
struct snd_soc_codec *codec = codec_dai->codec;
int adc_reg, dac_reg;
- adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
- dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
+ adc_reg = snd_soc_read(codec, AD1938_ADC_CTRL2);
+ dac_reg = snd_soc_read(codec, AD1938_DAC_CTRL1);
/* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
* with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
@@ -265,8 +263,8 @@
return -EINVAL;
}
- codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
- codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
+ snd_soc_write(codec, AD1938_ADC_CTRL2, adc_reg);
+ snd_soc_write(codec, AD1938_DAC_CTRL1, dac_reg);
return 0;
}
@@ -295,134 +293,13 @@
break;
}
- reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = snd_soc_read(codec, AD1938_DAC_CTRL2);
reg = (reg & (~AD1938_DAC_WORD_LEN_MASK)) | word_len;
- codec->write(codec, AD1938_DAC_CTRL2, reg);
+ snd_soc_write(codec, AD1938_DAC_CTRL2, reg);
- reg = codec->read(codec, AD1938_ADC_CTRL1);
+ reg = snd_soc_read(codec, AD1938_ADC_CTRL1);
reg = (reg & (~AD1938_ADC_WORD_LEN_MASK)) | word_len;
- codec->write(codec, AD1938_ADC_CTRL1, reg);
-
- return 0;
-}
-
-static int ad1938_set_bias_level(struct snd_soc_codec *codec,
- enum snd_soc_bias_level level)
-{
- switch (level) {
- case SND_SOC_BIAS_ON:
- ad1938_pll_powerctrl(codec, 1);
- break;
- case SND_SOC_BIAS_PREPARE:
- break;
- case SND_SOC_BIAS_STANDBY:
- case SND_SOC_BIAS_OFF:
- ad1938_pll_powerctrl(codec, 0);
- break;
- }
- codec->bias_level = level;
- return 0;
-}
-
-/*
- * interface to read/write ad1938 register
- */
-
-#define AD1938_SPI_ADDR 0x4
-#define AD1938_SPI_READ 0x1
-#define AD1938_SPI_BUFLEN 3
-
-/*
- * write to the ad1938 register space
- */
-
-static int ad1938_write_reg(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 *reg_cache = codec->reg_cache;
- int ret = 0;
-
- if (value != reg_cache[reg]) {
- uint8_t buf[AD1938_SPI_BUFLEN];
- struct spi_transfer t = {
- .tx_buf = buf,
- .len = AD1938_SPI_BUFLEN,
- };
- struct spi_message m;
-
- buf[0] = AD1938_SPI_ADDR << 1;
- buf[1] = reg;
- buf[2] = value;
- spi_message_init(&m);
- spi_message_add_tail(&t, &m);
- ret = spi_sync(codec->control_data, &m);
- if (ret == 0)
- reg_cache[reg] = value;
- }
-
- return ret;
-}
-
-/*
- * read from the ad1938 register space cache
- */
-
-static unsigned int ad1938_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u8 *reg_cache = codec->reg_cache;
-
- if (reg >= codec->reg_cache_size)
- return -EINVAL;
-
- return reg_cache[reg];
-}
-
-/*
- * read from the ad1938 register space
- */
-
-static unsigned int ad1938_read_reg(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- char w_buf[AD1938_SPI_BUFLEN];
- char r_buf[AD1938_SPI_BUFLEN];
- int ret;
-
- struct spi_transfer t = {
- .tx_buf = w_buf,
- .rx_buf = r_buf,
- .len = AD1938_SPI_BUFLEN,
- };
- struct spi_message m;
-
- w_buf[0] = (AD1938_SPI_ADDR << 1) | AD1938_SPI_READ;
- w_buf[1] = reg;
- w_buf[2] = 0;
-
- spi_message_init(&m);
- spi_message_add_tail(&t, &m);
- ret = spi_sync(codec->control_data, &m);
- if (ret == 0)
- return r_buf[2];
- else
- return -EIO;
-}
-
-static int ad1938_fill_cache(struct snd_soc_codec *codec)
-{
- int i;
- u8 *reg_cache = codec->reg_cache;
- struct spi_device *spi = codec->control_data;
-
- for (i = 0; i < codec->reg_cache_size; i++) {
- int ret = ad1938_read_reg(codec, i);
- if (ret == -EIO) {
- dev_err(&spi->dev, "AD1938 SPI read failure\n");
- return ret;
- }
- reg_cache[i] = ret;
- }
+ snd_soc_write(codec, AD1938_ADC_CTRL1, reg);
return 0;
}
@@ -512,32 +389,37 @@
codec->owner = THIS_MODULE;
codec->dai = &ad1938_dai;
codec->num_dai = 1;
- codec->write = ad1938_write_reg;
- codec->read = ad1938_read_reg_cache;
- codec->set_bias_level = ad1938_set_bias_level;
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
ad1938_dai.dev = codec->dev;
ad1938_codec = codec;
+ memcpy(codec->reg_cache, ad1938_reg, AD1938_NUM_REGS);
+
+ ret = snd_soc_codec_set_cache_io(codec, 16, 8, SND_SOC_SPI);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to set cache I/O: %d\n",
+ ret);
+ kfree(ad1938);
+ return ret;
+ }
+
/* default setting for ad1938 */
/* unmute dac channels */
- codec->write(codec, AD1938_DAC_CHNL_MUTE, 0x0);
+ snd_soc_write(codec, AD1938_DAC_CHNL_MUTE, 0x0);
/* de-emphasis: 48kHz, powedown dac */
- codec->write(codec, AD1938_DAC_CTRL2, 0x1A);
+ snd_soc_write(codec, AD1938_DAC_CTRL2, 0x1A);
/* powerdown dac, dac in tdm mode */
- codec->write(codec, AD1938_DAC_CTRL0, 0x41);
+ snd_soc_write(codec, AD1938_DAC_CTRL0, 0x41);
/* high-pass filter enable */
- codec->write(codec, AD1938_ADC_CTRL0, 0x3);
+ snd_soc_write(codec, AD1938_ADC_CTRL0, 0x3);
/* sata delay=1, adc aux mode */
- codec->write(codec, AD1938_ADC_CTRL1, 0x43);
+ snd_soc_write(codec, AD1938_ADC_CTRL1, 0x43);
/* pll input: mclki/xi */
- codec->write(codec, AD1938_PLL_CLK_CTRL0, 0x9D);
- codec->write(codec, AD1938_PLL_CLK_CTRL1, 0x04);
-
- ad1938_fill_cache(codec);
+ snd_soc_write(codec, AD1938_PLL_CLK_CTRL0, 0x9D);
+ snd_soc_write(codec, AD1938_PLL_CLK_CTRL1, 0x04);
ret = snd_soc_register_codec(codec);
if (ret != 0) {
@@ -559,7 +441,6 @@
static void ad1938_unregister(struct ad1938_priv *ad1938)
{
- ad1938_set_bias_level(&ad1938->codec, SND_SOC_BIAS_OFF);
snd_soc_unregister_dai(&ad1938_dai);
snd_soc_unregister_codec(&ad1938->codec);
kfree(ad1938);
@@ -593,7 +474,6 @@
ARRAY_SIZE(ad1938_dapm_widgets));
snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
- ad1938_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
pcm_err:
return ret;
@@ -610,37 +490,9 @@
return 0;
}
-#ifdef CONFIG_PM
-static int ad1938_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
- ad1938_set_bias_level(codec, SND_SOC_BIAS_OFF);
- return 0;
-}
-
-static int ad1938_resume(struct platform_device *pdev)
-{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
- if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
- ad1938_set_bias_level(codec, SND_SOC_BIAS_ON);
-
- return 0;
-}
-#else
-#define ad1938_suspend NULL
-#define ad1938_resume NULL
-#endif
-
struct snd_soc_codec_device soc_codec_dev_ad1938 = {
.probe = ad1938_probe,
.remove = ad1938_remove,
- .suspend = ad1938_suspend,
- .resume = ad1938_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ad1938);
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index 3a14c6f..b9ef7e4 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -185,9 +185,7 @@
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_32000,
+ .rates = SNDRV_PCM_RATE_8000_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_3LE |
SNDRV_PCM_FMTBIT_S24_LE
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index ffe122d..dfbeb2d 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -28,6 +28,7 @@
#include <sound/initval.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#include "cs4270.h"
@@ -106,6 +107,10 @@
#define CS4270_MUTE_DAC_A 0x01
#define CS4270_MUTE_DAC_B 0x02
+static const char *supply_names[] = {
+ "va", "vd", "vlc"
+};
+
/* Private data for the CS4270 */
struct cs4270_private {
struct snd_soc_codec codec;
@@ -114,6 +119,9 @@
unsigned int mode; /* The mode (I2S or left-justified) */
unsigned int slave_mode;
unsigned int manual_mute;
+
+ /* power domain regulators */
+ struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
};
/**
@@ -192,6 +200,11 @@
* This function must be called by the machine driver's 'startup' function,
* otherwise the list of supported sample rates will not be available in
* time for ALSA.
+ *
+ * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
+ * theoretically possible sample rates to be enabled. Call it again with a
+ * proper value set one the external clock is set (most probably you would do
+ * that from a machine's driver 'hw_param' hook.
*/
static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
@@ -205,20 +218,27 @@
cs4270->mclk = freq;
- for (i = 0; i < NUM_MCLK_RATIOS; i++) {
- unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
- rates |= snd_pcm_rate_to_rate_bit(rate);
- if (rate < rate_min)
- rate_min = rate;
- if (rate > rate_max)
- rate_max = rate;
- }
- /* FIXME: soc should support a rate list */
- rates &= ~SNDRV_PCM_RATE_KNOT;
+ if (cs4270->mclk) {
+ for (i = 0; i < NUM_MCLK_RATIOS; i++) {
+ unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
+ rates |= snd_pcm_rate_to_rate_bit(rate);
+ if (rate < rate_min)
+ rate_min = rate;
+ if (rate > rate_max)
+ rate_max = rate;
+ }
+ /* FIXME: soc should support a rate list */
+ rates &= ~SNDRV_PCM_RATE_KNOT;
- if (!rates) {
- dev_err(codec->dev, "could not find a valid sample rate\n");
- return -EINVAL;
+ if (!rates) {
+ dev_err(codec->dev, "could not find a valid sample rate\n");
+ return -EINVAL;
+ }
+ } else {
+ /* enable all possible rates */
+ rates = SNDRV_PCM_RATE_8000_192000;
+ rate_min = 8000;
+ rate_max = 192000;
}
codec_dai->playback.rates = rates;
@@ -579,7 +599,8 @@
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = cs4270_codec;
- int ret;
+ struct cs4270_private *cs4270 = codec->private_data;
+ int i, ret;
/* Connect the codec to the socdev. snd_soc_new_pcms() needs this. */
socdev->card->codec = codec;
@@ -599,8 +620,26 @@
goto error_free_pcms;
}
+ /* get the power supply regulators */
+ for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+ cs4270->supplies[i].supply = supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
+ cs4270->supplies);
+ if (ret < 0)
+ goto error_free_pcms;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+ cs4270->supplies);
+ if (ret < 0)
+ goto error_free_regulators;
+
return 0;
+error_free_regulators:
+ regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
+ cs4270->supplies);
+
error_free_pcms:
snd_soc_free_pcms(socdev);
@@ -616,8 +655,12 @@
static int cs4270_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = cs4270_codec;
+ struct cs4270_private *cs4270 = codec->private_data;
snd_soc_free_pcms(socdev);
+ regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
+ regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
return 0;
};
@@ -799,17 +842,33 @@
static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct snd_soc_codec *codec = cs4270_codec;
- int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+ struct cs4270_private *cs4270 = codec->private_data;
+ int reg, ret;
- return snd_soc_write(codec, CS4270_PWRCTL, reg);
+ reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+ if (reg < 0)
+ return reg;
+
+ ret = snd_soc_write(codec, CS4270_PWRCTL, reg);
+ if (ret < 0)
+ return ret;
+
+ regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies),
+ cs4270->supplies);
+
+ return 0;
}
static int cs4270_soc_resume(struct platform_device *pdev)
{
struct snd_soc_codec *codec = cs4270_codec;
+ struct cs4270_private *cs4270 = codec->private_data;
struct i2c_client *i2c_client = codec->control_data;
int reg;
+ regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+ cs4270->supplies);
+
/* In case the device was put to hard reset during sleep, we need to
* wait 500ns here before any I2C communication. */
ndelay(500);
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
new file mode 100644
index 0000000..cf2975a
--- /dev/null
+++ b/sound/soc/codecs/da7210.c
@@ -0,0 +1,589 @@
+/*
+ * DA7210 ALSA Soc codec driver
+ *
+ * Copyright (c) 2009 Dialog Semiconductor
+ * Written by David Chen <Dajun.chen@diasemi.com>
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Cleanups by Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Tested on SuperH Ecovec24 board with S16/S24 LE in 48KHz using I2S
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+#include <sound/initval.h>
+#include <asm/div64.h>
+
+#include "da7210.h"
+
+/* DA7210 register space */
+#define DA7210_STATUS 0x02
+#define DA7210_STARTUP1 0x03
+#define DA7210_MIC_L 0x07
+#define DA7210_MIC_R 0x08
+#define DA7210_INMIX_L 0x0D
+#define DA7210_INMIX_R 0x0E
+#define DA7210_ADC_HPF 0x0F
+#define DA7210_ADC 0x10
+#define DA7210_DAC_HPF 0x14
+#define DA7210_DAC_L 0x15
+#define DA7210_DAC_R 0x16
+#define DA7210_DAC_SEL 0x17
+#define DA7210_OUTMIX_L 0x1C
+#define DA7210_OUTMIX_R 0x1D
+#define DA7210_HP_L_VOL 0x21
+#define DA7210_HP_R_VOL 0x22
+#define DA7210_HP_CFG 0x23
+#define DA7210_DAI_SRC_SEL 0x25
+#define DA7210_DAI_CFG1 0x26
+#define DA7210_DAI_CFG3 0x28
+#define DA7210_PLL_DIV3 0x2B
+#define DA7210_PLL 0x2C
+
+/* STARTUP1 bit fields */
+#define DA7210_SC_MST_EN (1 << 0)
+
+/* MIC_L bit fields */
+#define DA7210_MICBIAS_EN (1 << 6)
+#define DA7210_MIC_L_EN (1 << 7)
+
+/* MIC_R bit fields */
+#define DA7210_MIC_R_EN (1 << 7)
+
+/* INMIX_L bit fields */
+#define DA7210_IN_L_EN (1 << 7)
+
+/* INMIX_R bit fields */
+#define DA7210_IN_R_EN (1 << 7)
+
+/* ADC_HPF bit fields */
+#define DA7210_ADC_VOICE_EN (1 << 7)
+
+/* ADC bit fields */
+#define DA7210_ADC_L_EN (1 << 3)
+#define DA7210_ADC_R_EN (1 << 7)
+
+/* DAC_HPF fields */
+#define DA7210_DAC_VOICE_EN (1 << 7)
+
+/* DAC_SEL bit fields */
+#define DA7210_DAC_L_SRC_DAI_L (4 << 0)
+#define DA7210_DAC_L_EN (1 << 3)
+#define DA7210_DAC_R_SRC_DAI_R (5 << 4)
+#define DA7210_DAC_R_EN (1 << 7)
+
+/* OUTMIX_L bit fields */
+#define DA7210_OUT_L_EN (1 << 7)
+
+/* OUTMIX_R bit fields */
+#define DA7210_OUT_R_EN (1 << 7)
+
+/* HP_CFG bit fields */
+#define DA7210_HP_2CAP_MODE (1 << 1)
+#define DA7210_HP_SENSE_EN (1 << 2)
+#define DA7210_HP_L_EN (1 << 3)
+#define DA7210_HP_MODE (1 << 6)
+#define DA7210_HP_R_EN (1 << 7)
+
+/* DAI_SRC_SEL bit fields */
+#define DA7210_DAI_OUT_L_SRC (6 << 0)
+#define DA7210_DAI_OUT_R_SRC (7 << 4)
+
+/* DAI_CFG1 bit fields */
+#define DA7210_DAI_WORD_S16_LE (0 << 0)
+#define DA7210_DAI_WORD_S24_LE (2 << 0)
+#define DA7210_DAI_FLEN_64BIT (1 << 2)
+#define DA7210_DAI_MODE_MASTER (1 << 7)
+
+/* DAI_CFG3 bit fields */
+#define DA7210_DAI_FORMAT_I2SMODE (0 << 0)
+#define DA7210_DAI_OE (1 << 3)
+#define DA7210_DAI_EN (1 << 7)
+
+/*PLL_DIV3 bit fields */
+#define DA7210_MCLK_RANGE_10_20_MHZ (1 << 4)
+#define DA7210_PLL_BYP (1 << 6)
+
+/* PLL bit fields */
+#define DA7210_PLL_FS_48000 (11 << 0)
+
+#define DA7210_VERSION "0.0.1"
+
+/* Codec private data */
+struct da7210_priv {
+ struct snd_soc_codec codec;
+};
+
+static struct snd_soc_codec *da7210_codec;
+
+/*
+ * Register cache
+ */
+static const u8 da7210_reg[] = {
+ 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R0 - R7 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, /* R8 - RF */
+ 0x00, 0x00, 0x00, 0x00, 0x08, 0x10, 0x10, 0x54, /* R10 - R17 */
+ 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R18 - R1F */
+ 0x00, 0x00, 0x00, 0x02, 0x00, 0x76, 0x00, 0x00, /* R20 - R27 */
+ 0x04, 0x00, 0x00, 0x30, 0x2A, 0x00, 0x40, 0x00, /* R28 - R2F */
+ 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, /* R30 - R37 */
+ 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, /* R38 - R3F */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R40 - R4F */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R48 - R4F */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R50 - R57 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R58 - R5F */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R60 - R67 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R68 - R6F */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* R70 - R77 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x54, 0x54, 0x00, /* R78 - R7F */
+ 0x00, 0x00, 0x2C, 0x00, 0x00, 0x00, 0x00, 0x00, /* R80 - R87 */
+ 0x00, /* R88 */
+};
+
+/*
+ * Read da7210 register cache
+ */
+static inline u32 da7210_read_reg_cache(struct snd_soc_codec *codec, u32 reg)
+{
+ u8 *cache = codec->reg_cache;
+ BUG_ON(reg > ARRAY_SIZE(da7210_reg));
+ return cache[reg];
+}
+
+/*
+ * Write to the da7210 register space
+ */
+static int da7210_write(struct snd_soc_codec *codec, u32 reg, u32 value)
+{
+ u8 *cache = codec->reg_cache;
+ u8 data[2];
+
+ BUG_ON(codec->volatile_register);
+
+ data[0] = reg & 0xff;
+ data[1] = value & 0xff;
+
+ if (reg >= codec->reg_cache_size)
+ return -EIO;
+
+ if (2 != codec->hw_write(codec->control_data, data, 2))
+ return -EIO;
+
+ cache[reg] = value;
+ return 0;
+}
+
+/*
+ * Read from the da7210 register space.
+ */
+static inline u32 da7210_read(struct snd_soc_codec *codec, u32 reg)
+{
+ if (DA7210_STATUS == reg)
+ return i2c_smbus_read_byte_data(codec->control_data, reg);
+
+ return da7210_read_reg_cache(codec, reg);
+}
+
+static int da7210_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (is_play) {
+ /* PlayBack Volume 40 */
+ snd_soc_update_bits(codec, DA7210_HP_L_VOL, 0x3F, 40);
+ snd_soc_update_bits(codec, DA7210_HP_R_VOL, 0x3F, 40);
+
+ /* Enable Out */
+ snd_soc_update_bits(codec, DA7210_OUTMIX_L, 0x1F, 0x10);
+ snd_soc_update_bits(codec, DA7210_OUTMIX_R, 0x1F, 0x10);
+
+ } else {
+ /* Volume 7 */
+ snd_soc_update_bits(codec, DA7210_MIC_L, 0x7, 0x7);
+ snd_soc_update_bits(codec, DA7210_MIC_R, 0x7, 0x7);
+
+ /* Enable Mic */
+ snd_soc_update_bits(codec, DA7210_INMIX_L, 0x1F, 0x1);
+ snd_soc_update_bits(codec, DA7210_INMIX_R, 0x1F, 0x1);
+ }
+
+ return 0;
+}
+
+/*
+ * Set PCM DAI word length.
+ */
+static int da7210_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+ u32 dai_cfg1;
+ u32 reg, mask;
+
+ /* set DAI source to Left and Right ADC */
+ da7210_write(codec, DA7210_DAI_SRC_SEL,
+ DA7210_DAI_OUT_R_SRC | DA7210_DAI_OUT_L_SRC);
+
+ /* Enable DAI */
+ da7210_write(codec, DA7210_DAI_CFG3, DA7210_DAI_OE | DA7210_DAI_EN);
+
+ dai_cfg1 = 0xFC & da7210_read(codec, DA7210_DAI_CFG1);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ dai_cfg1 |= DA7210_DAI_WORD_S16_LE;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ dai_cfg1 |= DA7210_DAI_WORD_S24_LE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ da7210_write(codec, DA7210_DAI_CFG1, dai_cfg1);
+
+ /* FIXME
+ *
+ * It support 48K only now
+ */
+ switch (params_rate(params)) {
+ case 48000:
+ if (SNDRV_PCM_STREAM_PLAYBACK == substream->stream) {
+ reg = DA7210_DAC_HPF;
+ mask = DA7210_DAC_VOICE_EN;
+ } else {
+ reg = DA7210_ADC_HPF;
+ mask = DA7210_ADC_VOICE_EN;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, reg, mask, 0);
+
+ return 0;
+}
+
+/*
+ * Set DAI mode and Format
+ */
+static int da7210_set_dai_fmt(struct snd_soc_dai *codec_dai, u32 fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u32 dai_cfg1;
+ u32 dai_cfg3;
+
+ dai_cfg1 = 0x7f & da7210_read(codec, DA7210_DAI_CFG1);
+ dai_cfg3 = 0xfc & da7210_read(codec, DA7210_DAI_CFG3);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ dai_cfg1 |= DA7210_DAI_MODE_MASTER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* FIXME
+ *
+ * It support I2S only now
+ */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ dai_cfg3 |= DA7210_DAI_FORMAT_I2SMODE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* FIXME
+ *
+ * It support 64bit data transmission only now
+ */
+ dai_cfg1 |= DA7210_DAI_FLEN_64BIT;
+
+ da7210_write(codec, DA7210_DAI_CFG1, dai_cfg1);
+ da7210_write(codec, DA7210_DAI_CFG3, dai_cfg3);
+
+ return 0;
+}
+
+#define DA7210_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+/* DAI operations */
+static struct snd_soc_dai_ops da7210_dai_ops = {
+ .startup = da7210_startup,
+ .hw_params = da7210_hw_params,
+ .set_fmt = da7210_set_dai_fmt,
+};
+
+struct snd_soc_dai da7210_dai = {
+ .name = "DA7210 IIS",
+ .id = 0,
+ /* playback capabilities */
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = DA7210_FORMATS,
+ },
+ /* capture capabilities */
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = DA7210_FORMATS,
+ },
+ .ops = &da7210_dai_ops,
+};
+EXPORT_SYMBOL_GPL(da7210_dai);
+
+/*
+ * Initialize the DA7210 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int da7210_init(struct da7210_priv *da7210)
+{
+ struct snd_soc_codec *codec = &da7210->codec;
+ int ret = 0;
+
+ if (da7210_codec) {
+ dev_err(codec->dev, "Another da7210 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = da7210;
+ codec->name = "DA7210";
+ codec->owner = THIS_MODULE;
+ codec->read = da7210_read;
+ codec->write = da7210_write;
+ codec->dai = &da7210_dai;
+ codec->num_dai = 1;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache_size = ARRAY_SIZE(da7210_reg);
+ codec->reg_cache = kmemdup(da7210_reg,
+ sizeof(da7210_reg), GFP_KERNEL);
+
+ if (!codec->reg_cache)
+ return -ENOMEM;
+
+ da7210_dai.dev = codec->dev;
+ da7210_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register CODEC: %d\n", ret);
+ goto init_err;
+ }
+
+ ret = snd_soc_register_dai(&da7210_dai);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto init_err;
+ }
+
+ /* FIXME
+ *
+ * This driver use fixed value here
+ */
+
+ /*
+ * ADC settings
+ */
+
+ /* Enable Left & Right MIC PGA and Mic Bias */
+ da7210_write(codec, DA7210_MIC_L, DA7210_MIC_L_EN | DA7210_MICBIAS_EN);
+ da7210_write(codec, DA7210_MIC_R, DA7210_MIC_R_EN);
+
+ /* Enable Left and Right input PGA */
+ da7210_write(codec, DA7210_INMIX_L, DA7210_IN_L_EN);
+ da7210_write(codec, DA7210_INMIX_R, DA7210_IN_R_EN);
+
+ /* Enable Left and Right ADC */
+ da7210_write(codec, DA7210_ADC, DA7210_ADC_L_EN | DA7210_ADC_R_EN);
+
+ /*
+ * DAC settings
+ */
+
+ /* Enable Left and Right DAC */
+ da7210_write(codec, DA7210_DAC_SEL,
+ DA7210_DAC_L_SRC_DAI_L | DA7210_DAC_L_EN |
+ DA7210_DAC_R_SRC_DAI_R | DA7210_DAC_R_EN);
+
+ /* Enable Left and Right out PGA */
+ da7210_write(codec, DA7210_OUTMIX_L, DA7210_OUT_L_EN);
+ da7210_write(codec, DA7210_OUTMIX_R, DA7210_OUT_R_EN);
+
+ /* Enable Left and Right HeadPhone PGA */
+ da7210_write(codec, DA7210_HP_CFG,
+ DA7210_HP_2CAP_MODE | DA7210_HP_SENSE_EN |
+ DA7210_HP_L_EN | DA7210_HP_MODE | DA7210_HP_R_EN);
+
+ /* Diable PLL and bypass it */
+ da7210_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
+
+ /* Bypass PLL and set MCLK freq rang to 10-20MHz */
+ da7210_write(codec, DA7210_PLL_DIV3,
+ DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
+
+ /* Activate all enabled subsystem */
+ da7210_write(codec, DA7210_STARTUP1, DA7210_SC_MST_EN);
+
+ return ret;
+
+init_err:
+ kfree(codec->reg_cache);
+ codec->reg_cache = NULL;
+
+ return ret;
+
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct da7210_priv *da7210;
+ struct snd_soc_codec *codec;
+ int ret;
+
+ da7210 = kzalloc(sizeof(struct da7210_priv), GFP_KERNEL);
+ if (!da7210)
+ return -ENOMEM;
+
+ codec = &da7210->codec;
+ codec->dev = &i2c->dev;
+
+ i2c_set_clientdata(i2c, da7210);
+ codec->control_data = i2c;
+
+ ret = da7210_init(da7210);
+ if (ret < 0)
+ pr_err("Failed to initialise da7210 audio codec\n");
+
+ return ret;
+}
+
+static int __devexit da7210_i2c_remove(struct i2c_client *client)
+{
+ struct da7210_priv *da7210 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_dai(&da7210_dai);
+ kfree(da7210->codec.reg_cache);
+ kfree(da7210);
+ da7210_codec = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id da7210_i2c_id[] = {
+ { "da7210", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, da7210_i2c_id);
+
+/* I2C codec control layer */
+static struct i2c_driver da7210_i2c_driver = {
+ .driver = {
+ .name = "DA7210 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = da7210_i2c_probe,
+ .remove = __devexit_p(da7210_i2c_remove),
+ .id_table = da7210_i2c_id,
+};
+#endif
+
+static int da7210_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret;
+
+ if (!da7210_codec) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = da7210_codec;
+ codec = da7210_codec;
+
+ /* Register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0)
+ goto pcm_err;
+
+ dev_info(&pdev->dev, "DA7210 Audio Codec %s\n", DA7210_VERSION);
+
+pcm_err:
+ return ret;
+}
+
+static int da7210_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_da7210 = {
+ .probe = da7210_probe,
+ .remove = da7210_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_da7210);
+
+static int __init da7210_modinit(void)
+{
+ int ret = 0;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&da7210_i2c_driver);
+#endif
+ return ret;
+}
+module_init(da7210_modinit);
+
+static void __exit da7210_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&da7210_i2c_driver);
+#endif
+}
+module_exit(da7210_exit);
+
+MODULE_DESCRIPTION("ASoC DA7210 driver");
+MODULE_AUTHOR("David Chen, Kuninori Morimoto");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/da7210.h b/sound/soc/codecs/da7210.h
new file mode 100644
index 0000000..390d621
--- /dev/null
+++ b/sound/soc/codecs/da7210.h
@@ -0,0 +1,24 @@
+/*
+ * da7210.h -- audio driver for da7210
+ *
+ * Copyright (c) 2009 Dialog Semiconductor
+ * Written by David Chen <Dajun.chen@diasemi.com>
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Cleanups by Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _DA7210_H
+#define _DA7210_H
+
+extern struct snd_soc_dai da7210_dai;
+extern struct snd_soc_codec_device soc_codec_dev_da7210;
+
+#endif
+
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 2b4dc2b..e4b946a 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -765,9 +765,10 @@
struct snd_soc_codec *codec = socdev->card->codec;
struct aic3x_priv *aic3x = codec->private_data;
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
- u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
- u16 pll_d = 1;
+ u8 data, j, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
+ u16 d, pll_d = 1;
u8 reg;
+ int clk;
/* select data word length */
data =
@@ -833,48 +834,70 @@
if (bypass_pll)
return 0;
- /* Use PLL
- * find an apropriate setup for j, d, r and p by iterating over
- * p and r - j and d are calculated for each fraction.
- * Up to 128 values are probed, the closest one wins the game.
+ /* Use PLL, compute apropriate setup for j, d, r and p, the closest
+ * one wins the game. Try with d==0 first, next with d!=0.
+ * Constraints for j are according to the datasheet.
* The sysclk is divided by 1000 to prevent integer overflows.
*/
+
codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000);
for (r = 1; r <= 16; r++)
for (p = 1; p <= 8; p++) {
- int clk, tmp = (codec_clk * pll_r * 10) / pll_p;
- u8 j = tmp / 10000;
- u16 d = tmp % 10000;
+ for (j = 4; j <= 55; j++) {
+ /* This is actually 1000*((j+(d/10000))*r)/p
+ * The term had to be converted to get
+ * rid of the division by 10000; d = 0 here
+ */
+ int tmp_clk = (1000 * j * r) / p;
- if (j > 63)
- continue;
+ /* Check whether this values get closer than
+ * the best ones we had before
+ */
+ if (abs(codec_clk - tmp_clk) <
+ abs(codec_clk - last_clk)) {
+ pll_j = j; pll_d = 0;
+ pll_r = r; pll_p = p;
+ last_clk = tmp_clk;
+ }
- if (d != 0 && aic3x->sysclk < 10000000)
- continue;
-
- /* This is actually 1000 * ((j + (d/10000)) * r) / p
- * The term had to be converted to get rid of the
- * division by 10000 */
- clk = ((10000 * j * r) + (d * r)) / (10 * p);
-
- /* check whether this values get closer than the best
- * ones we had before */
- if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) {
- pll_j = j; pll_d = d; pll_r = r; pll_p = p;
- last_clk = clk;
+ /* Early exit for exact matches */
+ if (tmp_clk == codec_clk)
+ goto found;
}
-
- /* Early exit for exact matches */
- if (clk == codec_clk)
- break;
}
+ /* try with d != 0 */
+ for (p = 1; p <= 8; p++) {
+ j = codec_clk * p / 1000;
+
+ if (j < 4 || j > 11)
+ continue;
+
+ /* do not use codec_clk here since we'd loose precision */
+ d = ((2048 * p * fsref) - j * aic3x->sysclk)
+ * 100 / (aic3x->sysclk/100);
+
+ clk = (10000 * j + d) / (10 * p);
+
+ /* check whether this values get closer than the best
+ * ones we had before */
+ if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) {
+ pll_j = j; pll_d = d; pll_r = 1; pll_p = p;
+ last_clk = clk;
+ }
+
+ /* Early exit for exact matches */
+ if (clk == codec_clk)
+ goto found;
+ }
+
if (last_clk == 0) {
printk(KERN_ERR "%s(): unable to setup PLL\n", __func__);
return -EINVAL;
}
+found:
data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT));
aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT);
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 9c8903d..f9f367d 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -58,11 +59,26 @@
DAC33_FLUSH,
};
+enum dac33_fifo_modes {
+ DAC33_FIFO_BYPASS = 0,
+ DAC33_FIFO_MODE1,
+ DAC33_FIFO_MODE7,
+ DAC33_FIFO_LAST_MODE,
+};
+
+#define DAC33_NUM_SUPPLIES 3
+static const char *dac33_supply_names[DAC33_NUM_SUPPLIES] = {
+ "AVDD",
+ "DVDD",
+ "IOVDD",
+};
+
struct tlv320dac33_priv {
struct mutex mutex;
struct workqueue_struct *dac33_wq;
struct work_struct work;
struct snd_soc_codec codec;
+ struct regulator_bulk_data supplies[DAC33_NUM_SUPPLIES];
int power_gpio;
int chip_power;
int irq;
@@ -73,8 +89,9 @@
* this */
unsigned int nsample_max; /* nsample should not be higher than
* this */
- unsigned int nsample_switch; /* Use FIFO or bypass FIFO switch */
+ enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
unsigned int nsample; /* burst read amount from host */
+ u8 burst_bclkdiv; /* BCLK divider value in burst mode */
enum dac33_state state;
};
@@ -297,28 +314,49 @@
dac33_write(codec, DAC33_PWR_CTRL, reg);
}
-static void dac33_hard_power(struct snd_soc_codec *codec, int power)
+static int dac33_hard_power(struct snd_soc_codec *codec, int power)
{
struct tlv320dac33_priv *dac33 = codec->private_data;
+ int ret;
mutex_lock(&dac33->mutex);
if (power) {
- if (dac33->power_gpio >= 0) {
- gpio_set_value(dac33->power_gpio, 1);
- dac33->chip_power = 1;
- /* Restore registers */
- dac33_restore_regs(codec);
+ ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies),
+ dac33->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n", ret);
+ goto exit;
}
+
+ if (dac33->power_gpio >= 0)
+ gpio_set_value(dac33->power_gpio, 1);
+
+ dac33->chip_power = 1;
+
+ /* Restore registers */
+ dac33_restore_regs(codec);
+
dac33_soft_power(codec, 1);
} else {
dac33_soft_power(codec, 0);
- if (dac33->power_gpio >= 0) {
+ if (dac33->power_gpio >= 0)
gpio_set_value(dac33->power_gpio, 0);
- dac33->chip_power = 0;
- }
- }
- mutex_unlock(&dac33->mutex);
+ ret = regulator_bulk_disable(ARRAY_SIZE(dac33->supplies),
+ dac33->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to disable supplies: %d\n", ret);
+ goto exit;
+ }
+
+ dac33->chip_power = 0;
+ }
+
+exit:
+ mutex_unlock(&dac33->mutex);
+ return ret;
}
static int dac33_get_nsample(struct snd_kcontrol *kcontrol,
@@ -351,39 +389,48 @@
return ret;
}
-static int dac33_get_nsample_switch(struct snd_kcontrol *kcontrol,
+static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct tlv320dac33_priv *dac33 = codec->private_data;
- ucontrol->value.integer.value[0] = dac33->nsample_switch;
+ ucontrol->value.integer.value[0] = dac33->fifo_mode;
return 0;
}
-static int dac33_set_nsample_switch(struct snd_kcontrol *kcontrol,
+static int dac33_set_fifo_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct tlv320dac33_priv *dac33 = codec->private_data;
int ret = 0;
- if (dac33->nsample_switch == ucontrol->value.integer.value[0])
+ if (dac33->fifo_mode == ucontrol->value.integer.value[0])
return 0;
/* Do not allow changes while stream is running*/
if (codec->active)
return -EPERM;
if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] > 1)
+ ucontrol->value.integer.value[0] >= DAC33_FIFO_LAST_MODE)
ret = -EINVAL;
else
- dac33->nsample_switch = ucontrol->value.integer.value[0];
+ dac33->fifo_mode = ucontrol->value.integer.value[0];
return ret;
}
+/* Codec operation modes */
+static const char *dac33_fifo_mode_texts[] = {
+ "Bypass", "Mode 1", "Mode 7"
+};
+
+static const struct soc_enum dac33_fifo_mode_enum =
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(dac33_fifo_mode_texts),
+ dac33_fifo_mode_texts);
+
/*
* DACL/R digital volume control:
* from 0 dB to -63.5 in 0.5 dB steps
@@ -406,8 +453,8 @@
static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
dac33_get_nsample, dac33_set_nsample),
- SOC_SINGLE_EXT("nSample Switch", 0, 0, 1, 0,
- dac33_get_nsample_switch, dac33_set_nsample_switch),
+ SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
+ dac33_get_fifo_mode, dac33_set_fifo_mode),
};
/* Analog bypass */
@@ -469,6 +516,8 @@
static int dac33_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
+ int ret;
+
switch (level) {
case SND_SOC_BIAS_ON:
dac33_soft_power(codec, 1);
@@ -476,12 +525,19 @@
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
- if (codec->bias_level == SND_SOC_BIAS_OFF)
- dac33_hard_power(codec, 1);
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = dac33_hard_power(codec, 1);
+ if (ret != 0)
+ return ret;
+ }
+
dac33_soft_power(codec, 0);
break;
case SND_SOC_BIAS_OFF:
- dac33_hard_power(codec, 0);
+ ret = dac33_hard_power(codec, 0);
+ if (ret != 0)
+ return ret;
+
break;
}
codec->bias_level = level;
@@ -489,6 +545,51 @@
return 0;
}
+static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
+{
+ struct snd_soc_codec *codec;
+
+ codec = &dac33->codec;
+
+ switch (dac33->fifo_mode) {
+ case DAC33_FIFO_MODE1:
+ dac33_write16(codec, DAC33_NSAMPLE_MSB,
+ DAC33_THRREG(dac33->nsample));
+ dac33_write16(codec, DAC33_PREFILL_MSB,
+ DAC33_THRREG(dac33->alarm_threshold));
+ break;
+ case DAC33_FIFO_MODE7:
+ dac33_write16(codec, DAC33_PREFILL_MSB,
+ DAC33_THRREG(10));
+ break;
+ default:
+ dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
+ dac33->fifo_mode);
+ break;
+ }
+}
+
+static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
+{
+ struct snd_soc_codec *codec;
+
+ codec = &dac33->codec;
+
+ switch (dac33->fifo_mode) {
+ case DAC33_FIFO_MODE1:
+ dac33_write16(codec, DAC33_NSAMPLE_MSB,
+ DAC33_THRREG(dac33->nsample));
+ break;
+ case DAC33_FIFO_MODE7:
+ /* At the moment we are not using interrupts in mode7 */
+ break;
+ default:
+ dev_warn(codec->dev, "Unhandled FIFO mode: %d\n",
+ dac33->fifo_mode);
+ break;
+ }
+}
+
static void dac33_work(struct work_struct *work)
{
struct snd_soc_codec *codec;
@@ -502,14 +603,10 @@
switch (dac33->state) {
case DAC33_PREFILL:
dac33->state = DAC33_PLAYBACK;
- dac33_write16(codec, DAC33_NSAMPLE_MSB,
- DAC33_THRREG(dac33->nsample));
- dac33_write16(codec, DAC33_PREFILL_MSB,
- DAC33_THRREG(dac33->alarm_threshold));
+ dac33_prefill_handler(dac33);
break;
case DAC33_PLAYBACK:
- dac33_write16(codec, DAC33_NSAMPLE_MSB,
- DAC33_THRREG(dac33->nsample));
+ dac33_playback_handler(dac33);
break;
case DAC33_IDLE:
break;
@@ -547,7 +644,7 @@
unsigned int pwr_ctrl;
/* Stop pending workqueue */
- if (dac33->nsample_switch)
+ if (dac33->fifo_mode)
cancel_work_sync(&dac33->work);
mutex_lock(&dac33->mutex);
@@ -603,7 +700,7 @@
}
#define CALC_OSCSET(rate, refclk) ( \
- ((((rate * 10000) / refclk) * 4096) + 5000) / 10000)
+ ((((rate * 10000) / refclk) * 4096) + 7000) / 10000)
#define CALC_RATIOSET(rate, refclk) ( \
((((refclk * 100000) / rate) * 16384) + 50000) / 100000)
@@ -619,7 +716,7 @@
struct snd_soc_codec *codec = socdev->card->codec;
struct tlv320dac33_priv *dac33 = codec->private_data;
unsigned int oscset, ratioset, pwr_ctrl, reg_tmp;
- u8 aictrl_a, fifoctrl_a;
+ u8 aictrl_a, aictrl_b, fifoctrl_a;
switch (substream->runtime->rate) {
case 44100:
@@ -637,7 +734,10 @@
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
aictrl_a &= ~(DAC33_NCYCL_MASK | DAC33_WLEN_MASK);
+ /* Read FIFO control A, and clear FIFO flush bit */
fifoctrl_a = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
+ fifoctrl_a &= ~DAC33_FIFOFLUSH;
+
fifoctrl_a &= ~DAC33_WIDTH;
switch (substream->runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
@@ -675,7 +775,8 @@
dac33_oscwait(codec);
- if (dac33->nsample_switch) {
+ if (dac33->fifo_mode) {
+ /* Generic for all FIFO modes */
/* 50-51 : ASRC Control registers */
dac33_write(codec, DAC33_ASRC_CTRL_A, (1 << 4)); /* div=2 */
dac33_write(codec, DAC33_ASRC_CTRL_B, 1); /* ??? */
@@ -685,38 +786,101 @@
/* Set interrupts to high active */
dac33_write(codec, DAC33_INTP_CTRL_A, DAC33_INTPM_AHIGH);
-
- dac33_write(codec, DAC33_FIFO_IRQ_MODE_B,
- DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL));
- dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
} else {
+ /* FIFO bypass mode */
/* 50-51 : ASRC Control registers */
dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCBYP);
dac33_write(codec, DAC33_ASRC_CTRL_B, 0); /* ??? */
}
- if (dac33->nsample_switch)
+ /* Interrupt behaviour configuration */
+ switch (dac33->fifo_mode) {
+ case DAC33_FIFO_MODE1:
+ dac33_write(codec, DAC33_FIFO_IRQ_MODE_B,
+ DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL));
+ dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
+ break;
+ case DAC33_FIFO_MODE7:
+ /* Disable all interrupts */
+ dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0);
+ break;
+ default:
+ /* in FIFO bypass mode, the interrupts are not used */
+ break;
+ }
+
+ aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
+
+ switch (dac33->fifo_mode) {
+ case DAC33_FIFO_MODE1:
+ /*
+ * For mode1:
+ * Disable the FIFO bypass (Enable the use of FIFO)
+ * Select nSample mode
+ * BCLK is only running when data is needed by DAC33
+ */
fifoctrl_a &= ~DAC33_FBYPAS;
- else
+ fifoctrl_a &= ~DAC33_FAUTO;
+ aictrl_b &= ~DAC33_BCLKON;
+ break;
+ case DAC33_FIFO_MODE7:
+ /*
+ * For mode1:
+ * Disable the FIFO bypass (Enable the use of FIFO)
+ * Select Threshold mode
+ * BCLK is only running when data is needed by DAC33
+ */
+ fifoctrl_a &= ~DAC33_FBYPAS;
+ fifoctrl_a |= DAC33_FAUTO;
+ aictrl_b &= ~DAC33_BCLKON;
+ break;
+ default:
+ /*
+ * For FIFO bypass mode:
+ * Enable the FIFO bypass (Disable the FIFO use)
+ * Set the BCLK as continous
+ */
fifoctrl_a |= DAC33_FBYPAS;
+ aictrl_b |= DAC33_BCLKON;
+ break;
+ }
+
dac33_write(codec, DAC33_FIFO_CTRL_A, fifoctrl_a);
-
dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
- reg_tmp = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
- if (dac33->nsample_switch)
- reg_tmp &= ~DAC33_BCLKON;
+ dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
+
+ /*
+ * BCLK divide ratio
+ * 0: 1.5
+ * 1: 1
+ * 2: 2
+ * ...
+ * 254: 254
+ * 255: 255
+ */
+ if (dac33->fifo_mode)
+ dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C,
+ dac33->burst_bclkdiv);
else
- reg_tmp |= DAC33_BCLKON;
- dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, reg_tmp);
+ dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 32);
- if (dac33->nsample_switch) {
- /* 20: BCLK divide ratio */
- dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 3);
-
+ switch (dac33->fifo_mode) {
+ case DAC33_FIFO_MODE1:
dac33_write16(codec, DAC33_ATHR_MSB,
DAC33_THRREG(dac33->alarm_threshold));
- } else {
- dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 32);
+ break;
+ case DAC33_FIFO_MODE7:
+ /*
+ * Configure the threshold levels, and leave 10 sample space
+ * at the bottom, and also at the top of the FIFO
+ */
+ dac33_write16(codec, DAC33_UTHR_MSB,
+ DAC33_THRREG(DAC33_BUFFER_SIZE_SAMPLES - 10));
+ dac33_write16(codec, DAC33_LTHR_MSB,
+ DAC33_THRREG(10));
+ break;
+ default:
+ break;
}
mutex_unlock(&dac33->mutex);
@@ -789,7 +953,7 @@
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (dac33->nsample_switch) {
+ if (dac33->fifo_mode) {
dac33->state = DAC33_PREFILL;
queue_work(dac33->dac33_wq, &dac33->work);
}
@@ -797,7 +961,7 @@
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (dac33->nsample_switch) {
+ if (dac33->fifo_mode) {
dac33->state = DAC33_FLUSH;
queue_work(dac33->dac33_wq, &dac33->work);
}
@@ -843,6 +1007,7 @@
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
+ struct tlv320dac33_priv *dac33 = codec->private_data;
u8 aictrl_a, aictrl_b;
aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
@@ -855,7 +1020,11 @@
break;
case SND_SOC_DAIFMT_CBS_CFS:
/* Codec Slave */
- aictrl_a &= ~(DAC33_MSBCLK | DAC33_MSWCLK);
+ if (dac33->fifo_mode) {
+ dev_err(codec->dev, "FIFO mode requires master mode\n");
+ return -EINVAL;
+ } else
+ aictrl_a &= ~(DAC33_MSBCLK | DAC33_MSWCLK);
break;
default:
return -EINVAL;
@@ -959,6 +1128,9 @@
/* power on device */
dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ /* Bias level configuration has enabled regulator an extra time */
+ regulator_bulk_disable(ARRAY_SIZE(dac33->supplies), dac33->supplies);
+
return 0;
pcm_err:
@@ -1033,13 +1205,13 @@
};
EXPORT_SYMBOL_GPL(dac33_dai);
-static int dac33_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int __devinit dac33_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct tlv320dac33_platform_data *pdata;
struct tlv320dac33_priv *dac33;
struct snd_soc_codec *codec;
- int ret = 0;
+ int ret, i;
if (client->dev.platform_data == NULL) {
dev_err(&client->dev, "Platform data not set\n");
@@ -1080,10 +1252,11 @@
i2c_set_clientdata(client, dac33);
dac33->power_gpio = pdata->power_gpio;
+ dac33->burst_bclkdiv = pdata->burst_bclkdiv;
dac33->irq = client->irq;
dac33->nsample = NSAMPLE_MAX;
/* Disable FIFO use by default */
- dac33->nsample_switch = 0;
+ dac33->fifo_mode = DAC33_FIFO_BYPASS;
tlv320dac33_codec = codec;
@@ -1130,6 +1303,24 @@
}
}
+ for (i = 0; i < ARRAY_SIZE(dac33->supplies); i++)
+ dac33->supplies[i].supply = dac33_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(dac33->supplies),
+ dac33->supplies);
+
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(dac33->supplies),
+ dac33->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_enable;
+ }
+
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
@@ -1149,6 +1340,10 @@
return ret;
error_codec:
+ regulator_bulk_disable(ARRAY_SIZE(dac33->supplies), dac33->supplies);
+err_enable:
+ regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
+err_get:
if (dac33->irq >= 0) {
free_irq(dac33->irq, &dac33->codec);
destroy_workqueue(dac33->dac33_wq);
@@ -1165,7 +1360,7 @@
return ret;
}
-static int dac33_i2c_remove(struct i2c_client *client)
+static int __devexit dac33_i2c_remove(struct i2c_client *client)
{
struct tlv320dac33_priv *dac33;
@@ -1177,6 +1372,8 @@
if (dac33->irq >= 0)
free_irq(dac33->irq, &dac33->codec);
+ regulator_bulk_free(ARRAY_SIZE(dac33->supplies), dac33->supplies);
+
destroy_workqueue(dac33->dac33_wq);
snd_soc_unregister_dai(&dac33_dai);
snd_soc_unregister_codec(&dac33->codec);
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index 6b650c1..958d49c 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -25,6 +25,7 @@
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include <sound/tpa6130a2-plat.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
@@ -34,10 +35,22 @@
static struct i2c_client *tpa6130a2_client;
+#define TPA6130A2_NUM_SUPPLIES 2
+static const char *tpa6130a2_supply_names[TPA6130A2_NUM_SUPPLIES] = {
+ "CPVSS",
+ "Vdd",
+};
+
+static const char *tpa6140a2_supply_names[TPA6130A2_NUM_SUPPLIES] = {
+ "HPVdd",
+ "AVdd",
+};
+
/* This struct is used to save the context */
struct tpa6130a2_data {
struct mutex mutex;
unsigned char regs[TPA6130A2_CACHEREGNUM];
+ struct regulator_bulk_data supplies[TPA6130A2_NUM_SUPPLIES];
int power_gpio;
unsigned char power_state;
};
@@ -106,10 +119,11 @@
tpa6130a2_i2c_write(i, data->regs[i]);
}
-static void tpa6130a2_power(int power)
+static int tpa6130a2_power(int power)
{
struct tpa6130a2_data *data;
u8 val;
+ int ret;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
@@ -117,11 +131,20 @@
mutex_lock(&data->mutex);
if (power) {
/* Power on */
- if (data->power_gpio >= 0) {
+ if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 1);
- data->power_state = 1;
- tpa6130a2_initialize();
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret != 0) {
+ dev_err(&tpa6130a2_client->dev,
+ "Failed to enable supplies: %d\n", ret);
+ goto exit;
}
+
+ data->power_state = 1;
+ tpa6130a2_initialize();
+
/* Clear SWS */
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val &= ~TPA6130A2_SWS;
@@ -131,13 +154,25 @@
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val |= TPA6130A2_SWS;
tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
+
/* Power off */
- if (data->power_gpio >= 0) {
+ if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 0);
- data->power_state = 0;
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret != 0) {
+ dev_err(&tpa6130a2_client->dev,
+ "Failed to disable supplies: %d\n", ret);
+ goto exit;
}
+
+ data->power_state = 0;
}
+
+exit:
mutex_unlock(&data->mutex);
+ return ret;
}
static int tpa6130a2_get_reg(struct snd_kcontrol *kcontrol,
@@ -237,12 +272,8 @@
*/
static void tpa6130a2_channel_enable(u8 channel, int enable)
{
- struct tpa6130a2_data *data;
u8 val;
- BUG_ON(tpa6130a2_client == NULL);
- data = i2c_get_clientdata(tpa6130a2_client);
-
if (enable) {
/* Enable channel */
/* Enable amplifier */
@@ -299,15 +330,17 @@
static int tpa6130a2_supply_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
+ int ret = 0;
+
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- tpa6130a2_power(1);
+ ret = tpa6130a2_power(1);
break;
case SND_SOC_DAPM_POST_PMD:
- tpa6130a2_power(0);
+ ret = tpa6130a2_power(0);
break;
}
- return 0;
+ return ret;
}
static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = {
@@ -346,13 +379,13 @@
}
EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
-static int tpa6130a2_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int __devinit tpa6130a2_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct device *dev;
struct tpa6130a2_data *data;
struct tpa6130a2_platform_data *pdata;
- int ret;
+ int i, ret;
dev = &client->dev;
@@ -387,15 +420,38 @@
if (ret < 0) {
dev_err(dev, "Failed to request power GPIO (%d)\n",
data->power_gpio);
- goto fail;
+ goto err_gpio;
}
gpio_direction_output(data->power_gpio, 0);
- } else {
- data->power_state = 1;
- tpa6130a2_initialize();
}
- tpa6130a2_power(1);
+ switch (pdata->id) {
+ case TPA6130A2:
+ for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
+ data->supplies[i].supply = tpa6130a2_supply_names[i];
+ break;
+ case TPA6140A2:
+ for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
+ data->supplies[i].supply = tpa6140a2_supply_names[i];;
+ break;
+ default:
+ dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
+ pdata->id);
+ for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
+ data->supplies[i].supply = tpa6130a2_supply_names[i];
+ }
+
+ ret = regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret != 0) {
+ dev_err(dev, "Failed to request supplies: %d\n", ret);
+ goto err_regulator;
+ }
+
+ ret = tpa6130a2_power(1);
+ if (ret != 0)
+ goto err_power;
+
/* Read version */
ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
@@ -404,10 +460,18 @@
dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
/* Disable the chip */
- tpa6130a2_power(0);
+ ret = tpa6130a2_power(0);
+ if (ret != 0)
+ goto err_power;
return 0;
-fail:
+
+err_power:
+ regulator_bulk_free(ARRAY_SIZE(data->supplies), data->supplies);
+err_regulator:
+ if (data->power_gpio >= 0)
+ gpio_free(data->power_gpio);
+err_gpio:
kfree(data);
i2c_set_clientdata(tpa6130a2_client, NULL);
tpa6130a2_client = NULL;
@@ -415,7 +479,7 @@
return ret;
}
-static int tpa6130a2_remove(struct i2c_client *client)
+static int __devexit tpa6130a2_remove(struct i2c_client *client)
{
struct tpa6130a2_data *data = i2c_get_clientdata(client);
@@ -423,6 +487,9 @@
if (data->power_gpio >= 0)
gpio_free(data->power_gpio);
+
+ regulator_bulk_free(ARRAY_SIZE(data->supplies), data->supplies);
+
kfree(data);
tpa6130a2_client = NULL;
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 2a27f7b..6f5d4af 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -55,7 +55,7 @@
0x0c, /* REG_ATXR1PGA (0xB) */
0x00, /* REG_AVTXL2PGA (0xC) */
0x00, /* REG_AVTXR2PGA (0xD) */
- 0x01, /* REG_AUDIO_IF (0xE) */
+ 0x00, /* REG_AUDIO_IF (0xE) */
0x00, /* REG_VOICE_IF (0xF) */
0x00, /* REG_ARXR1PGA (0x10) */
0x00, /* REG_ARXL1PGA (0x11) */
@@ -64,19 +64,19 @@
0x00, /* REG_VRXPGA (0x14) */
0x00, /* REG_VSTPGA (0x15) */
0x00, /* REG_VRX2ARXPGA (0x16) */
- 0x0c, /* REG_AVDAC_CTL (0x17) */
+ 0x00, /* REG_AVDAC_CTL (0x17) */
0x00, /* REG_ARX2VTXPGA (0x18) */
0x00, /* REG_ARXL1_APGA_CTL (0x19) */
0x00, /* REG_ARXR1_APGA_CTL (0x1A) */
- 0x4b, /* REG_ARXL2_APGA_CTL (0x1B) */
- 0x4b, /* REG_ARXR2_APGA_CTL (0x1C) */
+ 0x4a, /* REG_ARXL2_APGA_CTL (0x1B) */
+ 0x4a, /* REG_ARXR2_APGA_CTL (0x1C) */
0x00, /* REG_ATX2ARXPGA (0x1D) */
0x00, /* REG_BT_IF (0x1E) */
0x00, /* REG_BTPGA (0x1F) */
0x00, /* REG_BTSTPGA (0x20) */
0x00, /* REG_EAR_CTL (0x21) */
- 0x24, /* REG_HS_SEL (0x22) */
- 0x0a, /* REG_HS_GAIN_SET (0x23) */
+ 0x00, /* REG_HS_SEL (0x22) */
+ 0x00, /* REG_HS_GAIN_SET (0x23) */
0x00, /* REG_HS_POPN_SET (0x24) */
0x00, /* REG_PREDL_CTL (0x25) */
0x00, /* REG_PREDR_CTL (0x26) */
@@ -99,7 +99,7 @@
0x00, /* REG_I2S_RX_SCRAMBLE_H (0x37) */
0x00, /* REG_I2S_RX_SCRAMBLE_M (0x38) */
0x00, /* REG_I2S_RX_SCRAMBLE_L (0x39) */
- 0x16, /* REG_APLL_CTL (0x3A) */
+ 0x06, /* REG_APLL_CTL (0x3A) */
0x00, /* REG_DTMF_CTL (0x3B) */
0x00, /* REG_DTMF_PGA_CTL2 (0x3C) */
0x00, /* REG_DTMF_PGA_CTL1 (0x3D) */
@@ -1203,6 +1203,8 @@
SND_SOC_DAPM_SUPPLY("APLL Enable", SND_SOC_NOPM, 0, 0, apll_event,
SND_SOC_DAPM_PRE_PMU|SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_SUPPLY("AIF Enable", TWL4030_REG_AUDIO_IF, 0, 0, NULL, 0),
+
/* Output MIXER controls */
/* Earpiece */
SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
@@ -1337,6 +1339,11 @@
{"Digital L2 Playback Mixer", NULL, "APLL Enable"},
{"Digital Voice Playback Mixer", NULL, "APLL Enable"},
+ {"Digital R1 Playback Mixer", NULL, "AIF Enable"},
+ {"Digital L1 Playback Mixer", NULL, "AIF Enable"},
+ {"Digital R2 Playback Mixer", NULL, "AIF Enable"},
+ {"Digital L2 Playback Mixer", NULL, "AIF Enable"},
+
{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
@@ -1455,6 +1462,11 @@
{"ADC Virtual Left2", NULL, "APLL Enable"},
{"ADC Virtual Right2", NULL, "APLL Enable"},
+ {"ADC Virtual Left1", NULL, "AIF Enable"},
+ {"ADC Virtual Right1", NULL, "AIF Enable"},
+ {"ADC Virtual Left2", NULL, "AIF Enable"},
+ {"ADC Virtual Right2", NULL, "AIF Enable"},
+
/* Analog bypass routes */
{"Right1 Analog Loopback", "Switch", "Analog Right"},
{"Left1 Analog Loopback", "Switch", "Analog Left"},
@@ -2152,8 +2164,6 @@
twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
- kfree(codec->private_data);
- kfree(codec);
return 0;
}
@@ -2192,7 +2202,7 @@
codec->write = twl4030_write;
codec->set_bias_level = twl4030_set_bias_level;
codec->dai = twl4030_dai;
- codec->num_dai = ARRAY_SIZE(twl4030_dai),
+ codec->num_dai = ARRAY_SIZE(twl4030_dai);
codec->reg_cache_size = sizeof(twl4030_reg);
codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
GFP_KERNEL);
@@ -2237,6 +2247,9 @@
{
struct twl4030_priv *twl4030 = platform_get_drvdata(pdev);
+ snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
+ snd_soc_unregister_codec(&twl4030->codec);
+ kfree(twl4030->codec.reg_cache);
kfree(twl4030);
twl4030_codec = NULL;
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index dd6396e..f206d24 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -25,7 +25,7 @@
/* Register descriptions are here */
#include <linux/mfd/twl4030-codec.h>
-/* Sgadow register used by the audio driver */
+/* Shadow register used by the audio driver */
#define TWL4030_REG_SW_SHADOW 0x4A
#define TWL4030_CACHEREGNUM (TWL4030_REG_SW_SHADOW + 1)
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
new file mode 100644
index 0000000..217b026
--- /dev/null
+++ b/sound/soc/codecs/wm2000.c
@@ -0,0 +1,888 @@
+/*
+ * wm2000.c -- WM2000 ALSA Soc Audio driver
+ *
+ * Copyright 2008-2010 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The download image for the WM2000 will be requested as
+ * 'wm2000_anc.bin' by default (overridable via platform data) at
+ * runtime and is expected to be in flat binary format. This is
+ * generated by Wolfson configuration tools and includes
+ * system-specific callibration information. If supplied as a
+ * sequence of ASCII-encoded hexidecimal bytes this can be converted
+ * into a flat binary with a command such as this on the command line:
+ *
+ * perl -e 'while (<>) { s/[\r\n]+// ; printf("%c", hex($_)); }'
+ * < file > wm2000_anc.bin
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/wm2000.h>
+
+#include "wm2000.h"
+
+enum wm2000_anc_mode {
+ ANC_ACTIVE = 0,
+ ANC_BYPASS = 1,
+ ANC_STANDBY = 2,
+ ANC_OFF = 3,
+};
+
+struct wm2000_priv {
+ struct i2c_client *i2c;
+
+ enum wm2000_anc_mode anc_mode;
+
+ unsigned int anc_active:1;
+ unsigned int anc_eng_ena:1;
+ unsigned int spk_ena:1;
+
+ unsigned int mclk_div:1;
+ unsigned int speech_clarity:1;
+
+ int anc_download_size;
+ char *anc_download;
+};
+
+static struct i2c_client *wm2000_i2c;
+
+static int wm2000_write(struct i2c_client *i2c, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[3];
+ int ret;
+
+ data[0] = (reg >> 8) & 0xff;
+ data[1] = reg & 0xff;
+ data[2] = value & 0xff;
+
+ dev_vdbg(&i2c->dev, "write %x = %x\n", reg, value);
+
+ ret = i2c_master_send(i2c, data, 3);
+ if (ret == 3)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static unsigned int wm2000_read(struct i2c_client *i2c, unsigned int r)
+{
+ struct i2c_msg xfer[2];
+ u8 reg[2];
+ u8 data;
+ int ret;
+
+ /* Write register */
+ reg[0] = (r >> 8) & 0xff;
+ reg[1] = r & 0xff;
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = sizeof(reg);
+ xfer[0].buf = ®[0];
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 1;
+ xfer[1].buf = &data;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(&i2c->dev, "i2c_transfer() returned %d\n", ret);
+ return 0;
+ }
+
+ dev_vdbg(&i2c->dev, "read %x from %x\n", data, r);
+
+ return data;
+}
+
+static void wm2000_reset(struct wm2000_priv *wm2000)
+{
+ struct i2c_client *i2c = wm2000->i2c;
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
+ wm2000_write(i2c, WM2000_REG_ID1, 0);
+
+ wm2000->anc_mode = ANC_OFF;
+}
+
+static int wm2000_poll_bit(struct i2c_client *i2c,
+ unsigned int reg, u8 mask, int timeout)
+{
+ int val;
+
+ val = wm2000_read(i2c, reg);
+
+ while (!(val & mask) && --timeout) {
+ msleep(1);
+ val = wm2000_read(i2c, reg);
+ }
+
+ if (timeout == 0)
+ return 0;
+ else
+ return 1;
+}
+
+static int wm2000_power_up(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+ int ret, timeout;
+
+ BUG_ON(wm2000->anc_mode != ANC_OFF);
+
+ dev_dbg(&i2c->dev, "Beginning power up\n");
+
+ if (!wm2000->mclk_div) {
+ dev_dbg(&i2c->dev, "Disabling MCLK divider\n");
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2,
+ WM2000_MCLK_DIV2_ENA_CLR);
+ } else {
+ dev_dbg(&i2c->dev, "Enabling MCLK divider\n");
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2,
+ WM2000_MCLK_DIV2_ENA_SET);
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_SET);
+
+ /* Wait for ANC engine to become ready */
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
+ WM2000_ANC_ENG_IDLE, 1)) {
+ dev_err(&i2c->dev, "ANC engine failed to reset\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_BOOT_COMPLETE, 1)) {
+ dev_err(&i2c->dev, "ANC engine failed to initialise\n");
+ return -ETIMEDOUT;
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
+
+ /* Open code download of the data since it is the only bulk
+ * write we do. */
+ dev_dbg(&i2c->dev, "Downloading %d bytes\n",
+ wm2000->anc_download_size - 2);
+
+ ret = i2c_master_send(i2c, wm2000->anc_download,
+ wm2000->anc_download_size);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "i2c_transfer() failed: %d\n", ret);
+ return ret;
+ }
+ if (ret != wm2000->anc_download_size) {
+ dev_err(&i2c->dev, "i2c_transfer() failed, %d != %d\n",
+ ret, wm2000->anc_download_size);
+ return -EIO;
+ }
+
+ dev_dbg(&i2c->dev, "Download complete\n");
+
+ if (analogue) {
+ timeout = 248;
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_MOUSE_ENABLE |
+ WM2000_MODE_THERMAL_ENABLE);
+ } else {
+ timeout = 10;
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_MOUSE_ENABLE |
+ WM2000_MODE_THERMAL_ENABLE);
+ }
+
+ ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY);
+ if (wm2000->speech_clarity)
+ ret &= ~WM2000_SPEECH_CLARITY;
+ else
+ ret |= WM2000_SPEECH_CLARITY;
+ wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret);
+
+ wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33);
+ wm2000_write(i2c, WM2000_REG_SYS_START1, 0x02);
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
+ dev_err(&i2c->dev, "Timed out waiting for device after %dms\n",
+ timeout * 10);
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(&i2c->dev, "ANC active\n");
+ if (analogue)
+ dev_dbg(&i2c->dev, "Analogue active\n");
+ wm2000->anc_mode = ANC_ACTIVE;
+
+ return 0;
+}
+
+static int wm2000_power_down(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+ int timeout;
+
+ if (analogue) {
+ timeout = 248;
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_POWER_DOWN);
+ } else {
+ timeout = 10;
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_POWER_DOWN);
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_POWER_DOWN_COMPLETE, timeout)) {
+ dev_err(&i2c->dev, "Timeout waiting for ANC power down\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
+ WM2000_ANC_ENG_IDLE, 1)) {
+ dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(&i2c->dev, "powered off\n");
+ wm2000->anc_mode = ANC_OFF;
+
+ return 0;
+}
+
+static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
+
+ if (analogue) {
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_BYPASS_ENTRY);
+ } else {
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_BYPASS_ENTRY);
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_ANC_DISABLED, 10)) {
+ dev_err(&i2c->dev, "Timeout waiting for ANC disable\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT,
+ WM2000_ANC_ENG_IDLE, 1)) {
+ dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n");
+ return -ETIMEDOUT;
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
+
+ wm2000->anc_mode = ANC_BYPASS;
+ dev_dbg(&i2c->dev, "bypass enabled\n");
+
+ return 0;
+}
+
+static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ BUG_ON(wm2000->anc_mode != ANC_BYPASS);
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
+
+ if (analogue) {
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_MOUSE_ENABLE |
+ WM2000_MODE_THERMAL_ENABLE);
+ } else {
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_MOUSE_ENABLE |
+ WM2000_MODE_THERMAL_ENABLE);
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_MOUSE_ACTIVE, 10)) {
+ dev_err(&i2c->dev, "Timed out waiting for MOUSE\n");
+ return -ETIMEDOUT;
+ }
+
+ wm2000->anc_mode = ANC_ACTIVE;
+ dev_dbg(&i2c->dev, "MOUSE active\n");
+
+ return 0;
+}
+
+static int wm2000_enter_standby(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+ int timeout;
+
+ BUG_ON(wm2000->anc_mode != ANC_ACTIVE);
+
+ if (analogue) {
+ timeout = 248;
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, timeout / 4);
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_STANDBY_ENTRY);
+ } else {
+ timeout = 10;
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_STANDBY_ENTRY);
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_ANC_DISABLED, timeout)) {
+ dev_err(&i2c->dev,
+ "Timed out waiting for ANC disable after 1ms\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE,
+ 1)) {
+ dev_err(&i2c->dev,
+ "Timed out waiting for standby after %dms\n",
+ timeout * 10);
+ return -ETIMEDOUT;
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR);
+
+ wm2000->anc_mode = ANC_STANDBY;
+ dev_dbg(&i2c->dev, "standby\n");
+ if (analogue)
+ dev_dbg(&i2c->dev, "Analogue disabled\n");
+
+ return 0;
+}
+
+static int wm2000_exit_standby(struct i2c_client *i2c, int analogue)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+ int timeout;
+
+ BUG_ON(wm2000->anc_mode != ANC_STANDBY);
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0);
+
+ if (analogue) {
+ timeout = 248;
+ wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, timeout / 4);
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_ANA_SEQ_INCLUDE |
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_MOUSE_ENABLE);
+ } else {
+ timeout = 10;
+
+ wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL,
+ WM2000_MODE_THERMAL_ENABLE |
+ WM2000_MODE_MOUSE_ENABLE);
+ }
+
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET);
+ wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR);
+
+ if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS,
+ WM2000_STATUS_MOUSE_ACTIVE, timeout)) {
+ dev_err(&i2c->dev, "Timed out waiting for MOUSE after %dms\n",
+ timeout * 10);
+ return -ETIMEDOUT;
+ }
+
+ wm2000->anc_mode = ANC_ACTIVE;
+ dev_dbg(&i2c->dev, "MOUSE active\n");
+ if (analogue)
+ dev_dbg(&i2c->dev, "Analogue enabled\n");
+
+ return 0;
+}
+
+typedef int (*wm2000_mode_fn)(struct i2c_client *i2c, int analogue);
+
+static struct {
+ enum wm2000_anc_mode source;
+ enum wm2000_anc_mode dest;
+ int analogue;
+ wm2000_mode_fn step[2];
+} anc_transitions[] = {
+ {
+ .source = ANC_OFF,
+ .dest = ANC_ACTIVE,
+ .analogue = 1,
+ .step = {
+ wm2000_power_up,
+ },
+ },
+ {
+ .source = ANC_OFF,
+ .dest = ANC_STANDBY,
+ .step = {
+ wm2000_power_up,
+ wm2000_enter_standby,
+ },
+ },
+ {
+ .source = ANC_OFF,
+ .dest = ANC_BYPASS,
+ .analogue = 1,
+ .step = {
+ wm2000_power_up,
+ wm2000_enter_bypass,
+ },
+ },
+ {
+ .source = ANC_ACTIVE,
+ .dest = ANC_BYPASS,
+ .analogue = 1,
+ .step = {
+ wm2000_enter_bypass,
+ },
+ },
+ {
+ .source = ANC_ACTIVE,
+ .dest = ANC_STANDBY,
+ .analogue = 1,
+ .step = {
+ wm2000_enter_standby,
+ },
+ },
+ {
+ .source = ANC_ACTIVE,
+ .dest = ANC_OFF,
+ .analogue = 1,
+ .step = {
+ wm2000_power_down,
+ },
+ },
+ {
+ .source = ANC_BYPASS,
+ .dest = ANC_ACTIVE,
+ .analogue = 1,
+ .step = {
+ wm2000_exit_bypass,
+ },
+ },
+ {
+ .source = ANC_BYPASS,
+ .dest = ANC_STANDBY,
+ .analogue = 1,
+ .step = {
+ wm2000_exit_bypass,
+ wm2000_enter_standby,
+ },
+ },
+ {
+ .source = ANC_BYPASS,
+ .dest = ANC_OFF,
+ .step = {
+ wm2000_exit_bypass,
+ wm2000_power_down,
+ },
+ },
+ {
+ .source = ANC_STANDBY,
+ .dest = ANC_ACTIVE,
+ .analogue = 1,
+ .step = {
+ wm2000_exit_standby,
+ },
+ },
+ {
+ .source = ANC_STANDBY,
+ .dest = ANC_BYPASS,
+ .analogue = 1,
+ .step = {
+ wm2000_exit_standby,
+ wm2000_enter_bypass,
+ },
+ },
+ {
+ .source = ANC_STANDBY,
+ .dest = ANC_OFF,
+ .step = {
+ wm2000_exit_standby,
+ wm2000_power_down,
+ },
+ },
+};
+
+static int wm2000_anc_transition(struct wm2000_priv *wm2000,
+ enum wm2000_anc_mode mode)
+{
+ struct i2c_client *i2c = wm2000->i2c;
+ int i, j;
+ int ret;
+
+ if (wm2000->anc_mode == mode)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(anc_transitions); i++)
+ if (anc_transitions[i].source == wm2000->anc_mode &&
+ anc_transitions[i].dest == mode)
+ break;
+ if (i == ARRAY_SIZE(anc_transitions)) {
+ dev_err(&i2c->dev, "No transition for %d->%d\n",
+ wm2000->anc_mode, mode);
+ return -EINVAL;
+ }
+
+ for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) {
+ if (!anc_transitions[i].step[j])
+ break;
+ ret = anc_transitions[i].step[j](i2c,
+ anc_transitions[i].analogue);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
+{
+ struct i2c_client *i2c = wm2000->i2c;
+ enum wm2000_anc_mode mode;
+
+ if (wm2000->anc_eng_ena && wm2000->spk_ena)
+ if (wm2000->anc_active)
+ mode = ANC_ACTIVE;
+ else
+ mode = ANC_BYPASS;
+ else
+ mode = ANC_STANDBY;
+
+ dev_dbg(&i2c->dev, "Set mode %d (enabled %d, mute %d, active %d)\n",
+ mode, wm2000->anc_eng_ena, !wm2000->spk_ena,
+ wm2000->anc_active);
+
+ return wm2000_anc_transition(wm2000, mode);
+}
+
+static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&wm2000_i2c->dev);
+
+ ucontrol->value.enumerated.item[0] = wm2000->anc_active;
+
+ return 0;
+}
+
+static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&wm2000_i2c->dev);
+ int anc_active = ucontrol->value.enumerated.item[0];
+
+ if (anc_active > 1)
+ return -EINVAL;
+
+ wm2000->anc_active = anc_active;
+
+ return wm2000_anc_set_mode(wm2000);
+}
+
+static int wm2000_speaker_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&wm2000_i2c->dev);
+
+ ucontrol->value.enumerated.item[0] = wm2000->spk_ena;
+
+ return 0;
+}
+
+static int wm2000_speaker_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&wm2000_i2c->dev);
+ int val = ucontrol->value.enumerated.item[0];
+
+ if (val > 1)
+ return -EINVAL;
+
+ wm2000->spk_ena = val;
+
+ return wm2000_anc_set_mode(wm2000);
+}
+
+static const struct snd_kcontrol_new wm2000_controls[] = {
+ SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0,
+ wm2000_anc_mode_get,
+ wm2000_anc_mode_put),
+ SOC_SINGLE_BOOL_EXT("WM2000 Switch", 0,
+ wm2000_speaker_get,
+ wm2000_speaker_put),
+};
+
+static int wm2000_anc_power_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&wm2000_i2c->dev);
+
+ if (SND_SOC_DAPM_EVENT_ON(event))
+ wm2000->anc_eng_ena = 1;
+
+ if (SND_SOC_DAPM_EVENT_OFF(event))
+ wm2000->anc_eng_ena = 0;
+
+ return wm2000_anc_set_mode(wm2000);
+}
+
+static const struct snd_soc_dapm_widget wm2000_dapm_widgets[] = {
+/* Externally visible pins */
+SND_SOC_DAPM_OUTPUT("WM2000 SPKN"),
+SND_SOC_DAPM_OUTPUT("WM2000 SPKP"),
+
+SND_SOC_DAPM_INPUT("WM2000 LINN"),
+SND_SOC_DAPM_INPUT("WM2000 LINP"),
+
+SND_SOC_DAPM_PGA_E("ANC Engine", SND_SOC_NOPM, 0, 0, NULL, 0,
+ wm2000_anc_power_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+};
+
+/* Target, Path, Source */
+static const struct snd_soc_dapm_route audio_map[] = {
+ { "WM2000 SPKN", NULL, "ANC Engine" },
+ { "WM2000 SPKP", NULL, "ANC Engine" },
+ { "ANC Engine", NULL, "WM2000 LINN" },
+ { "ANC Engine", NULL, "WM2000 LINP" },
+};
+
+/* Called from the machine driver */
+int wm2000_add_controls(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ if (!wm2000_i2c) {
+ pr_err("WM2000 not yet probed\n");
+ return -ENODEV;
+ }
+
+ ret = snd_soc_dapm_new_controls(codec, wm2000_dapm_widgets,
+ ARRAY_SIZE(wm2000_dapm_widgets));
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ if (ret < 0)
+ return ret;
+
+ return snd_soc_add_controls(codec, wm2000_controls,
+ ARRAY_SIZE(wm2000_controls));
+}
+EXPORT_SYMBOL_GPL(wm2000_add_controls);
+
+static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ struct wm2000_priv *wm2000;
+ struct wm2000_platform_data *pdata;
+ const char *filename;
+ const struct firmware *fw;
+ int reg, ret;
+ u16 id;
+
+ if (wm2000_i2c) {
+ dev_err(&i2c->dev, "Another WM2000 is already registered\n");
+ return -EINVAL;
+ }
+
+ wm2000 = kzalloc(sizeof(struct wm2000_priv), GFP_KERNEL);
+ if (wm2000 == NULL) {
+ dev_err(&i2c->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ /* Verify that this is a WM2000 */
+ reg = wm2000_read(i2c, WM2000_REG_ID1);
+ id = reg << 8;
+ reg = wm2000_read(i2c, WM2000_REG_ID2);
+ id |= reg & 0xff;
+
+ if (id != 0x2000) {
+ dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ reg = wm2000_read(i2c, WM2000_REG_REVISON);
+ dev_info(&i2c->dev, "revision %c\n", reg + 'A');
+
+ filename = "wm2000_anc.bin";
+ pdata = dev_get_platdata(&i2c->dev);
+ if (pdata) {
+ wm2000->mclk_div = pdata->mclkdiv2;
+ wm2000->speech_clarity = !pdata->speech_enh_disable;
+
+ if (pdata->download_file)
+ filename = pdata->download_file;
+ }
+
+ ret = request_firmware(&fw, filename, &i2c->dev);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
+ goto err;
+ }
+
+ /* Pre-cook the concatenation of the register address onto the image */
+ wm2000->anc_download_size = fw->size + 2;
+ wm2000->anc_download = kmalloc(wm2000->anc_download_size, GFP_KERNEL);
+ if (wm2000->anc_download == NULL) {
+ dev_err(&i2c->dev, "Out of memory\n");
+ ret = -ENOMEM;
+ goto err_fw;
+ }
+
+ wm2000->anc_download[0] = 0x80;
+ wm2000->anc_download[1] = 0x00;
+ memcpy(wm2000->anc_download + 2, fw->data, fw->size);
+
+ release_firmware(fw);
+
+ dev_set_drvdata(&i2c->dev, wm2000);
+ wm2000->anc_eng_ena = 1;
+ wm2000->i2c = i2c;
+
+ wm2000_reset(wm2000);
+
+ /* This will trigger a transition to standby mode by default */
+ wm2000_anc_set_mode(wm2000);
+
+ wm2000_i2c = i2c;
+
+ return 0;
+
+err_fw:
+ release_firmware(fw);
+err:
+ kfree(wm2000);
+ return ret;
+}
+
+static __devexit int wm2000_i2c_remove(struct i2c_client *i2c)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ wm2000_anc_transition(wm2000, ANC_OFF);
+
+ wm2000_i2c = NULL;
+ kfree(wm2000->anc_download);
+ kfree(wm2000);
+
+ return 0;
+}
+
+static void wm2000_i2c_shutdown(struct i2c_client *i2c)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ wm2000_anc_transition(wm2000, ANC_OFF);
+}
+
+#ifdef CONFIG_PM
+static int wm2000_i2c_suspend(struct i2c_client *i2c, pm_message_t mesg)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ return wm2000_anc_transition(wm2000, ANC_OFF);
+}
+
+static int wm2000_i2c_resume(struct i2c_client *i2c)
+{
+ struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev);
+
+ return wm2000_anc_set_mode(wm2000);
+}
+#else
+#define wm2000_i2c_suspend NULL
+#define wm2000_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm2000_i2c_id[] = {
+ { "wm2000", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm2000_i2c_id);
+
+static struct i2c_driver wm2000_i2c_driver = {
+ .driver = {
+ .name = "wm2000",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm2000_i2c_probe,
+ .remove = __devexit_p(wm2000_i2c_remove),
+ .suspend = wm2000_i2c_suspend,
+ .resume = wm2000_i2c_resume,
+ .shutdown = wm2000_i2c_shutdown,
+ .id_table = wm2000_i2c_id,
+};
+
+static int __init wm2000_init(void)
+{
+ return i2c_add_driver(&wm2000_i2c_driver);
+}
+module_init(wm2000_init);
+
+static void __exit wm2000_exit(void)
+{
+ i2c_del_driver(&wm2000_i2c_driver);
+}
+module_exit(wm2000_exit);
+
+MODULE_DESCRIPTION("ASoC WM2000 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm2000.h b/sound/soc/codecs/wm2000.h
new file mode 100644
index 0000000..c18e261
--- /dev/null
+++ b/sound/soc/codecs/wm2000.h
@@ -0,0 +1,79 @@
+/*
+ * wm2000.h -- WM2000 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM2000_H
+#define _WM2000_H
+
+struct wm2000_setup_data {
+ unsigned short i2c_address;
+ int mclk_div; /* Set to a non-zero value if MCLK_DIV_2 required */
+};
+
+extern int wm2000_add_controls(struct snd_soc_codec *codec);
+
+extern struct snd_soc_dai wm2000_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm2000;
+
+#define WM2000_REG_SYS_START 0x8000
+#define WM2000_REG_SPEECH_CLARITY 0x8fef
+#define WM2000_REG_SYS_WATCHDOG 0x8ff6
+#define WM2000_REG_ANA_VMID_PD_TIME 0x8ff7
+#define WM2000_REG_ANA_VMID_PU_TIME 0x8ff8
+#define WM2000_REG_CAT_FLTR_INDX 0x8ff9
+#define WM2000_REG_CAT_GAIN_0 0x8ffa
+#define WM2000_REG_SYS_STATUS 0x8ffc
+#define WM2000_REG_SYS_MODE_CNTRL 0x8ffd
+#define WM2000_REG_SYS_START0 0x8ffe
+#define WM2000_REG_SYS_START1 0x8fff
+#define WM2000_REG_ID1 0xf000
+#define WM2000_REG_ID2 0xf001
+#define WM2000_REG_REVISON 0xf002
+#define WM2000_REG_SYS_CTL1 0xf003
+#define WM2000_REG_SYS_CTL2 0xf004
+#define WM2000_REG_ANC_STAT 0xf005
+#define WM2000_REG_IF_CTL 0xf006
+
+/* SPEECH_CLARITY */
+#define WM2000_SPEECH_CLARITY 0x01
+
+/* SYS_STATUS */
+#define WM2000_STATUS_MOUSE_ACTIVE 0x40
+#define WM2000_STATUS_CAT_FREQ_COMPLETE 0x20
+#define WM2000_STATUS_CAT_GAIN_COMPLETE 0x10
+#define WM2000_STATUS_THERMAL_SHUTDOWN_COMPLETE 0x08
+#define WM2000_STATUS_ANC_DISABLED 0x04
+#define WM2000_STATUS_POWER_DOWN_COMPLETE 0x02
+#define WM2000_STATUS_BOOT_COMPLETE 0x01
+
+/* SYS_MODE_CNTRL */
+#define WM2000_MODE_ANA_SEQ_INCLUDE 0x80
+#define WM2000_MODE_MOUSE_ENABLE 0x40
+#define WM2000_MODE_CAT_FREQ_ENABLE 0x20
+#define WM2000_MODE_CAT_GAIN_ENABLE 0x10
+#define WM2000_MODE_BYPASS_ENTRY 0x08
+#define WM2000_MODE_STANDBY_ENTRY 0x04
+#define WM2000_MODE_THERMAL_ENABLE 0x02
+#define WM2000_MODE_POWER_DOWN 0x01
+
+/* SYS_CTL1 */
+#define WM2000_SYS_STBY 0x01
+
+/* SYS_CTL2 */
+#define WM2000_MCLK_DIV2_ENA_CLR 0x80
+#define WM2000_MCLK_DIV2_ENA_SET 0x40
+#define WM2000_ANC_ENG_CLR 0x20
+#define WM2000_ANC_ENG_SET 0x10
+#define WM2000_ANC_INT_N_CLR 0x08
+#define WM2000_ANC_INT_N_SET 0x04
+#define WM2000_RAM_CLR 0x02
+#define WM2000_RAM_SET 0x01
+
+/* ANC_STAT */
+#define WM2000_ANC_ENG_IDLE 0x01
+
+#endif
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index d8ffbd6..63a254e 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -44,23 +44,16 @@
};
EXPORT_SYMBOL_GPL(wm8727_dai);
+static struct snd_soc_codec *wm8727_codec;
+
static int wm8727_soc_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec;
int ret = 0;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
- mutex_init(&codec->mutex);
- codec->name = "WM8727";
- codec->owner = THIS_MODULE;
- codec->dai = &wm8727_dai;
- codec->num_dai = 1;
- socdev->card->codec = codec;
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
+ BUG_ON(!wm8727_codec);
+
+ socdev->card->codec = wm8727_codec;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
@@ -80,12 +73,9 @@
static int wm8727_soc_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
- if (codec == NULL)
- return 0;
snd_soc_free_pcms(socdev);
- kfree(codec);
+
return 0;
}
@@ -98,13 +88,55 @@
static __devinit int wm8727_platform_probe(struct platform_device *pdev)
{
+ struct snd_soc_codec *codec;
+ int ret;
+
+ if (wm8727_codec) {
+ dev_err(&pdev->dev, "Another WM8727 is registered\n");
+ return -EBUSY;
+ }
+
+ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (codec == NULL)
+ return -ENOMEM;
+ wm8727_codec = codec;
+
+ platform_set_drvdata(pdev, codec);
+
+ mutex_init(&codec->mutex);
+ codec->dev = &pdev->dev;
+ codec->name = "WM8727";
+ codec->owner = THIS_MODULE;
+ codec->dai = &wm8727_dai;
+ codec->num_dai = 1;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
wm8727_dai.dev = &pdev->dev;
- return snd_soc_register_dai(&wm8727_dai);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to register CODEC: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8727_dai);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(codec);
+ return ret;
}
static int __devexit wm8727_platform_remove(struct platform_device *pdev)
{
snd_soc_unregister_dai(&wm8727_dai);
+ snd_soc_unregister_codec(platform_get_drvdata(pdev));
return 0;
}
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 3a49781..5a2619d 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -456,6 +456,9 @@
/* Sync reg_cache with the hardware */
for (i = 0; i < ARRAY_SIZE(wm8731_reg); i++) {
+ if (cache[i] == wm8731_reg[i])
+ continue;
+
data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
data[1] = cache[i] & 0x00ff;
codec->hw_write(codec->control_data, data, 2);
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index d6850dacd..c2444e7 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1507,10 +1507,6 @@
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
- /* we only need to suspend if we are a valid card */
- if (!codec->card)
- return 0;
-
wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
@@ -1523,10 +1519,6 @@
u8 data[2];
u16 *cache = codec->reg_cache;
- /* we only need to resume if we are a valid card */
- if (!codec->card)
- return 0;
-
/* Sync reg_cache with the hardware */
for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
if (i + 1 == WM8753_RESET)
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index ab2c0da..44e7d9d 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -406,6 +406,8 @@
/* Sync reg_cache with the hardware */
for (i = 0; i < ARRAY_SIZE(wm8776_reg); i++) {
+ if (cache[i] == wm8776_reg[i])
+ continue;
data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
data[1] = cache[i] & 0x00ff;
codec->hw_write(codec->control_data, data, 2);
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
new file mode 100644
index 0000000..593e47d
--- /dev/null
+++ b/sound/soc/codecs/wm8904.c
@@ -0,0 +1,2656 @@
+/*
+ * wm8904.c -- WM8904 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/wm8904.h>
+
+#include "wm8904.h"
+
+static struct snd_soc_codec *wm8904_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8904;
+
+enum wm8904_type {
+ WM8904,
+ WM8912,
+};
+
+#define WM8904_NUM_DCS_CHANNELS 4
+
+#define WM8904_NUM_SUPPLIES 5
+static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "AVDD",
+ "CPVDD",
+ "MICVDD",
+};
+
+/* codec private data */
+struct wm8904_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8904_MAX_REGISTER + 1];
+
+ enum wm8904_type devtype;
+
+ struct regulator_bulk_data supplies[WM8904_NUM_SUPPLIES];
+
+ struct wm8904_pdata *pdata;
+
+ int deemph;
+
+ /* Platform provided DRC configuration */
+ const char **drc_texts;
+ int drc_cfg;
+ struct soc_enum drc_enum;
+
+ /* Platform provided ReTune mobile configuration */
+ int num_retune_mobile_texts;
+ const char **retune_mobile_texts;
+ int retune_mobile_cfg;
+ struct soc_enum retune_mobile_enum;
+
+ /* FLL setup */
+ int fll_src;
+ int fll_fref;
+ int fll_fout;
+
+ /* Clocking configuration */
+ unsigned int mclk_rate;
+ int sysclk_src;
+ unsigned int sysclk_rate;
+
+ int tdm_width;
+ int tdm_slots;
+ int bclk;
+ int fs;
+
+ /* DC servo configuration - cached offset values */
+ int dcs_state[WM8904_NUM_DCS_CHANNELS];
+};
+
+static const u16 wm8904_reg[WM8904_MAX_REGISTER + 1] = {
+ 0x8904, /* R0 - SW Reset and ID */
+ 0x0000, /* R1 - Revision */
+ 0x0000, /* R2 */
+ 0x0000, /* R3 */
+ 0x0018, /* R4 - Bias Control 0 */
+ 0x0000, /* R5 - VMID Control 0 */
+ 0x0000, /* R6 - Mic Bias Control 0 */
+ 0x0000, /* R7 - Mic Bias Control 1 */
+ 0x0001, /* R8 - Analogue DAC 0 */
+ 0x9696, /* R9 - mic Filter Control */
+ 0x0001, /* R10 - Analogue ADC 0 */
+ 0x0000, /* R11 */
+ 0x0000, /* R12 - Power Management 0 */
+ 0x0000, /* R13 */
+ 0x0000, /* R14 - Power Management 2 */
+ 0x0000, /* R15 - Power Management 3 */
+ 0x0000, /* R16 */
+ 0x0000, /* R17 */
+ 0x0000, /* R18 - Power Management 6 */
+ 0x0000, /* R19 */
+ 0x945E, /* R20 - Clock Rates 0 */
+ 0x0C05, /* R21 - Clock Rates 1 */
+ 0x0006, /* R22 - Clock Rates 2 */
+ 0x0000, /* R23 */
+ 0x0050, /* R24 - Audio Interface 0 */
+ 0x000A, /* R25 - Audio Interface 1 */
+ 0x00E4, /* R26 - Audio Interface 2 */
+ 0x0040, /* R27 - Audio Interface 3 */
+ 0x0000, /* R28 */
+ 0x0000, /* R29 */
+ 0x00C0, /* R30 - DAC Digital Volume Left */
+ 0x00C0, /* R31 - DAC Digital Volume Right */
+ 0x0000, /* R32 - DAC Digital 0 */
+ 0x0008, /* R33 - DAC Digital 1 */
+ 0x0000, /* R34 */
+ 0x0000, /* R35 */
+ 0x00C0, /* R36 - ADC Digital Volume Left */
+ 0x00C0, /* R37 - ADC Digital Volume Right */
+ 0x0010, /* R38 - ADC Digital 0 */
+ 0x0000, /* R39 - Digital Microphone 0 */
+ 0x01AF, /* R40 - DRC 0 */
+ 0x3248, /* R41 - DRC 1 */
+ 0x0000, /* R42 - DRC 2 */
+ 0x0000, /* R43 - DRC 3 */
+ 0x0085, /* R44 - Analogue Left Input 0 */
+ 0x0085, /* R45 - Analogue Right Input 0 */
+ 0x0044, /* R46 - Analogue Left Input 1 */
+ 0x0044, /* R47 - Analogue Right Input 1 */
+ 0x0000, /* R48 */
+ 0x0000, /* R49 */
+ 0x0000, /* R50 */
+ 0x0000, /* R51 */
+ 0x0000, /* R52 */
+ 0x0000, /* R53 */
+ 0x0000, /* R54 */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x002D, /* R57 - Analogue OUT1 Left */
+ 0x002D, /* R58 - Analogue OUT1 Right */
+ 0x0039, /* R59 - Analogue OUT2 Left */
+ 0x0039, /* R60 - Analogue OUT2 Right */
+ 0x0000, /* R61 - Analogue OUT12 ZC */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x0000, /* R64 */
+ 0x0000, /* R65 */
+ 0x0000, /* R66 */
+ 0x0000, /* R67 - DC Servo 0 */
+ 0x0000, /* R68 - DC Servo 1 */
+ 0xAAAA, /* R69 - DC Servo 2 */
+ 0x0000, /* R70 */
+ 0xAAAA, /* R71 - DC Servo 4 */
+ 0xAAAA, /* R72 - DC Servo 5 */
+ 0x0000, /* R73 - DC Servo 6 */
+ 0x0000, /* R74 - DC Servo 7 */
+ 0x0000, /* R75 - DC Servo 8 */
+ 0x0000, /* R76 - DC Servo 9 */
+ 0x0000, /* R77 - DC Servo Readback 0 */
+ 0x0000, /* R78 */
+ 0x0000, /* R79 */
+ 0x0000, /* R80 */
+ 0x0000, /* R81 */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0000, /* R88 */
+ 0x0000, /* R89 */
+ 0x0000, /* R90 - Analogue HP 0 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 */
+ 0x0000, /* R93 */
+ 0x0000, /* R94 - Analogue Lineout 0 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 - Charge Pump 0 */
+ 0x0000, /* R99 */
+ 0x0000, /* R100 */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x0004, /* R104 - Class W 0 */
+ 0x0000, /* R105 */
+ 0x0000, /* R106 */
+ 0x0000, /* R107 */
+ 0x0000, /* R108 - Write Sequencer 0 */
+ 0x0000, /* R109 - Write Sequencer 1 */
+ 0x0000, /* R110 - Write Sequencer 2 */
+ 0x0000, /* R111 - Write Sequencer 3 */
+ 0x0000, /* R112 - Write Sequencer 4 */
+ 0x0000, /* R113 */
+ 0x0000, /* R114 */
+ 0x0000, /* R115 */
+ 0x0000, /* R116 - FLL Control 1 */
+ 0x0007, /* R117 - FLL Control 2 */
+ 0x0000, /* R118 - FLL Control 3 */
+ 0x2EE0, /* R119 - FLL Control 4 */
+ 0x0004, /* R120 - FLL Control 5 */
+ 0x0014, /* R121 - GPIO Control 1 */
+ 0x0010, /* R122 - GPIO Control 2 */
+ 0x0010, /* R123 - GPIO Control 3 */
+ 0x0000, /* R124 - GPIO Control 4 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 - Digital Pulls */
+ 0x0000, /* R127 - Interrupt Status */
+ 0xFFFF, /* R128 - Interrupt Status Mask */
+ 0x0000, /* R129 - Interrupt Polarity */
+ 0x0000, /* R130 - Interrupt Debounce */
+ 0x0000, /* R131 */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 */
+ 0x0000, /* R134 - EQ1 */
+ 0x000C, /* R135 - EQ2 */
+ 0x000C, /* R136 - EQ3 */
+ 0x000C, /* R137 - EQ4 */
+ 0x000C, /* R138 - EQ5 */
+ 0x000C, /* R139 - EQ6 */
+ 0x0FCA, /* R140 - EQ7 */
+ 0x0400, /* R141 - EQ8 */
+ 0x00D8, /* R142 - EQ9 */
+ 0x1EB5, /* R143 - EQ10 */
+ 0xF145, /* R144 - EQ11 */
+ 0x0B75, /* R145 - EQ12 */
+ 0x01C5, /* R146 - EQ13 */
+ 0x1C58, /* R147 - EQ14 */
+ 0xF373, /* R148 - EQ15 */
+ 0x0A54, /* R149 - EQ16 */
+ 0x0558, /* R150 - EQ17 */
+ 0x168E, /* R151 - EQ18 */
+ 0xF829, /* R152 - EQ19 */
+ 0x07AD, /* R153 - EQ20 */
+ 0x1103, /* R154 - EQ21 */
+ 0x0564, /* R155 - EQ22 */
+ 0x0559, /* R156 - EQ23 */
+ 0x4000, /* R157 - EQ24 */
+ 0x0000, /* R158 */
+ 0x0000, /* R159 */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 - Control Interface Test 1 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 */
+ 0x0000, /* R164 */
+ 0x0000, /* R165 */
+ 0x0000, /* R166 */
+ 0x0000, /* R167 */
+ 0x0000, /* R168 */
+ 0x0000, /* R169 */
+ 0x0000, /* R170 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 */
+ 0x0000, /* R173 */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 */
+ 0x0000, /* R177 */
+ 0x0000, /* R178 */
+ 0x0000, /* R179 */
+ 0x0000, /* R180 */
+ 0x0000, /* R181 */
+ 0x0000, /* R182 */
+ 0x0000, /* R183 */
+ 0x0000, /* R184 */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 */
+ 0x0000, /* R187 */
+ 0x0000, /* R188 */
+ 0x0000, /* R189 */
+ 0x0000, /* R190 */
+ 0x0000, /* R191 */
+ 0x0000, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 */
+ 0x0000, /* R196 */
+ 0x0000, /* R197 */
+ 0x0000, /* R198 */
+ 0x0000, /* R199 */
+ 0x0000, /* R200 */
+ 0x0000, /* R201 */
+ 0x0000, /* R202 */
+ 0x0000, /* R203 */
+ 0x0000, /* R204 - Analogue Output Bias 0 */
+ 0x0000, /* R205 */
+ 0x0000, /* R206 */
+ 0x0000, /* R207 */
+ 0x0000, /* R208 */
+ 0x0000, /* R209 */
+ 0x0000, /* R210 */
+ 0x0000, /* R211 */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 */
+ 0x0000, /* R216 */
+ 0x0000, /* R217 */
+ 0x0000, /* R218 */
+ 0x0000, /* R219 */
+ 0x0000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 */
+ 0x0000, /* R226 */
+ 0x0000, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0x0000, /* R230 */
+ 0x0000, /* R231 */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0000, /* R245 */
+ 0x0000, /* R246 */
+ 0x0000, /* R247 - FLL NCO Test 0 */
+ 0x0019, /* R248 - FLL NCO Test 1 */
+};
+
+static struct {
+ int readable;
+ int writable;
+ int vol;
+} wm8904_access[] = {
+ { 0xFFFF, 0xFFFF, 1 }, /* R0 - SW Reset and ID */
+ { 0x0000, 0x0000, 0 }, /* R1 - Revision */
+ { 0x0000, 0x0000, 0 }, /* R2 */
+ { 0x0000, 0x0000, 0 }, /* R3 */
+ { 0x001F, 0x001F, 0 }, /* R4 - Bias Control 0 */
+ { 0x0047, 0x0047, 0 }, /* R5 - VMID Control 0 */
+ { 0x007F, 0x007F, 0 }, /* R6 - Mic Bias Control 0 */
+ { 0xC007, 0xC007, 0 }, /* R7 - Mic Bias Control 1 */
+ { 0x001E, 0x001E, 0 }, /* R8 - Analogue DAC 0 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R9 - mic Filter Control */
+ { 0x0001, 0x0001, 0 }, /* R10 - Analogue ADC 0 */
+ { 0x0000, 0x0000, 0 }, /* R11 */
+ { 0x0003, 0x0003, 0 }, /* R12 - Power Management 0 */
+ { 0x0000, 0x0000, 0 }, /* R13 */
+ { 0x0003, 0x0003, 0 }, /* R14 - Power Management 2 */
+ { 0x0003, 0x0003, 0 }, /* R15 - Power Management 3 */
+ { 0x0000, 0x0000, 0 }, /* R16 */
+ { 0x0000, 0x0000, 0 }, /* R17 */
+ { 0x000F, 0x000F, 0 }, /* R18 - Power Management 6 */
+ { 0x0000, 0x0000, 0 }, /* R19 */
+ { 0x7001, 0x7001, 0 }, /* R20 - Clock Rates 0 */
+ { 0x3C07, 0x3C07, 0 }, /* R21 - Clock Rates 1 */
+ { 0xD00F, 0xD00F, 0 }, /* R22 - Clock Rates 2 */
+ { 0x0000, 0x0000, 0 }, /* R23 */
+ { 0x1FFF, 0x1FFF, 0 }, /* R24 - Audio Interface 0 */
+ { 0x3DDF, 0x3DDF, 0 }, /* R25 - Audio Interface 1 */
+ { 0x0F1F, 0x0F1F, 0 }, /* R26 - Audio Interface 2 */
+ { 0x0FFF, 0x0FFF, 0 }, /* R27 - Audio Interface 3 */
+ { 0x0000, 0x0000, 0 }, /* R28 */
+ { 0x0000, 0x0000, 0 }, /* R29 */
+ { 0x00FF, 0x01FF, 0 }, /* R30 - DAC Digital Volume Left */
+ { 0x00FF, 0x01FF, 0 }, /* R31 - DAC Digital Volume Right */
+ { 0x0FFF, 0x0FFF, 0 }, /* R32 - DAC Digital 0 */
+ { 0x1E4E, 0x1E4E, 0 }, /* R33 - DAC Digital 1 */
+ { 0x0000, 0x0000, 0 }, /* R34 */
+ { 0x0000, 0x0000, 0 }, /* R35 */
+ { 0x00FF, 0x01FF, 0 }, /* R36 - ADC Digital Volume Left */
+ { 0x00FF, 0x01FF, 0 }, /* R37 - ADC Digital Volume Right */
+ { 0x0073, 0x0073, 0 }, /* R38 - ADC Digital 0 */
+ { 0x1800, 0x1800, 0 }, /* R39 - Digital Microphone 0 */
+ { 0xDFEF, 0xDFEF, 0 }, /* R40 - DRC 0 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R41 - DRC 1 */
+ { 0x003F, 0x003F, 0 }, /* R42 - DRC 2 */
+ { 0x07FF, 0x07FF, 0 }, /* R43 - DRC 3 */
+ { 0x009F, 0x009F, 0 }, /* R44 - Analogue Left Input 0 */
+ { 0x009F, 0x009F, 0 }, /* R45 - Analogue Right Input 0 */
+ { 0x007F, 0x007F, 0 }, /* R46 - Analogue Left Input 1 */
+ { 0x007F, 0x007F, 0 }, /* R47 - Analogue Right Input 1 */
+ { 0x0000, 0x0000, 0 }, /* R48 */
+ { 0x0000, 0x0000, 0 }, /* R49 */
+ { 0x0000, 0x0000, 0 }, /* R50 */
+ { 0x0000, 0x0000, 0 }, /* R51 */
+ { 0x0000, 0x0000, 0 }, /* R52 */
+ { 0x0000, 0x0000, 0 }, /* R53 */
+ { 0x0000, 0x0000, 0 }, /* R54 */
+ { 0x0000, 0x0000, 0 }, /* R55 */
+ { 0x0000, 0x0000, 0 }, /* R56 */
+ { 0x017F, 0x01FF, 0 }, /* R57 - Analogue OUT1 Left */
+ { 0x017F, 0x01FF, 0 }, /* R58 - Analogue OUT1 Right */
+ { 0x017F, 0x01FF, 0 }, /* R59 - Analogue OUT2 Left */
+ { 0x017F, 0x01FF, 0 }, /* R60 - Analogue OUT2 Right */
+ { 0x000F, 0x000F, 0 }, /* R61 - Analogue OUT12 ZC */
+ { 0x0000, 0x0000, 0 }, /* R62 */
+ { 0x0000, 0x0000, 0 }, /* R63 */
+ { 0x0000, 0x0000, 0 }, /* R64 */
+ { 0x0000, 0x0000, 0 }, /* R65 */
+ { 0x0000, 0x0000, 0 }, /* R66 */
+ { 0x000F, 0x000F, 0 }, /* R67 - DC Servo 0 */
+ { 0xFFFF, 0xFFFF, 1 }, /* R68 - DC Servo 1 */
+ { 0x0F0F, 0x0F0F, 0 }, /* R69 - DC Servo 2 */
+ { 0x0000, 0x0000, 0 }, /* R70 */
+ { 0x007F, 0x007F, 0 }, /* R71 - DC Servo 4 */
+ { 0x007F, 0x007F, 0 }, /* R72 - DC Servo 5 */
+ { 0x00FF, 0x00FF, 1 }, /* R73 - DC Servo 6 */
+ { 0x00FF, 0x00FF, 1 }, /* R74 - DC Servo 7 */
+ { 0x00FF, 0x00FF, 1 }, /* R75 - DC Servo 8 */
+ { 0x00FF, 0x00FF, 1 }, /* R76 - DC Servo 9 */
+ { 0x0FFF, 0x0000, 1 }, /* R77 - DC Servo Readback 0 */
+ { 0x0000, 0x0000, 0 }, /* R78 */
+ { 0x0000, 0x0000, 0 }, /* R79 */
+ { 0x0000, 0x0000, 0 }, /* R80 */
+ { 0x0000, 0x0000, 0 }, /* R81 */
+ { 0x0000, 0x0000, 0 }, /* R82 */
+ { 0x0000, 0x0000, 0 }, /* R83 */
+ { 0x0000, 0x0000, 0 }, /* R84 */
+ { 0x0000, 0x0000, 0 }, /* R85 */
+ { 0x0000, 0x0000, 0 }, /* R86 */
+ { 0x0000, 0x0000, 0 }, /* R87 */
+ { 0x0000, 0x0000, 0 }, /* R88 */
+ { 0x0000, 0x0000, 0 }, /* R89 */
+ { 0x00FF, 0x00FF, 0 }, /* R90 - Analogue HP 0 */
+ { 0x0000, 0x0000, 0 }, /* R91 */
+ { 0x0000, 0x0000, 0 }, /* R92 */
+ { 0x0000, 0x0000, 0 }, /* R93 */
+ { 0x00FF, 0x00FF, 0 }, /* R94 - Analogue Lineout 0 */
+ { 0x0000, 0x0000, 0 }, /* R95 */
+ { 0x0000, 0x0000, 0 }, /* R96 */
+ { 0x0000, 0x0000, 0 }, /* R97 */
+ { 0x0001, 0x0001, 0 }, /* R98 - Charge Pump 0 */
+ { 0x0000, 0x0000, 0 }, /* R99 */
+ { 0x0000, 0x0000, 0 }, /* R100 */
+ { 0x0000, 0x0000, 0 }, /* R101 */
+ { 0x0000, 0x0000, 0 }, /* R102 */
+ { 0x0000, 0x0000, 0 }, /* R103 */
+ { 0x0001, 0x0001, 0 }, /* R104 - Class W 0 */
+ { 0x0000, 0x0000, 0 }, /* R105 */
+ { 0x0000, 0x0000, 0 }, /* R106 */
+ { 0x0000, 0x0000, 0 }, /* R107 */
+ { 0x011F, 0x011F, 0 }, /* R108 - Write Sequencer 0 */
+ { 0x7FFF, 0x7FFF, 0 }, /* R109 - Write Sequencer 1 */
+ { 0x4FFF, 0x4FFF, 0 }, /* R110 - Write Sequencer 2 */
+ { 0x003F, 0x033F, 0 }, /* R111 - Write Sequencer 3 */
+ { 0x03F1, 0x0000, 0 }, /* R112 - Write Sequencer 4 */
+ { 0x0000, 0x0000, 0 }, /* R113 */
+ { 0x0000, 0x0000, 0 }, /* R114 */
+ { 0x0000, 0x0000, 0 }, /* R115 */
+ { 0x0007, 0x0007, 0 }, /* R116 - FLL Control 1 */
+ { 0x3F77, 0x3F77, 0 }, /* R117 - FLL Control 2 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R118 - FLL Control 3 */
+ { 0x7FEF, 0x7FEF, 0 }, /* R119 - FLL Control 4 */
+ { 0x001B, 0x001B, 0 }, /* R120 - FLL Control 5 */
+ { 0x003F, 0x003F, 0 }, /* R121 - GPIO Control 1 */
+ { 0x003F, 0x003F, 0 }, /* R122 - GPIO Control 2 */
+ { 0x003F, 0x003F, 0 }, /* R123 - GPIO Control 3 */
+ { 0x038F, 0x038F, 0 }, /* R124 - GPIO Control 4 */
+ { 0x0000, 0x0000, 0 }, /* R125 */
+ { 0x00FF, 0x00FF, 0 }, /* R126 - Digital Pulls */
+ { 0x07FF, 0x03FF, 1 }, /* R127 - Interrupt Status */
+ { 0x03FF, 0x03FF, 0 }, /* R128 - Interrupt Status Mask */
+ { 0x03FF, 0x03FF, 0 }, /* R129 - Interrupt Polarity */
+ { 0x03FF, 0x03FF, 0 }, /* R130 - Interrupt Debounce */
+ { 0x0000, 0x0000, 0 }, /* R131 */
+ { 0x0000, 0x0000, 0 }, /* R132 */
+ { 0x0000, 0x0000, 0 }, /* R133 */
+ { 0x0001, 0x0001, 0 }, /* R134 - EQ1 */
+ { 0x001F, 0x001F, 0 }, /* R135 - EQ2 */
+ { 0x001F, 0x001F, 0 }, /* R136 - EQ3 */
+ { 0x001F, 0x001F, 0 }, /* R137 - EQ4 */
+ { 0x001F, 0x001F, 0 }, /* R138 - EQ5 */
+ { 0x001F, 0x001F, 0 }, /* R139 - EQ6 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R140 - EQ7 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R141 - EQ8 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R142 - EQ9 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R143 - EQ10 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R144 - EQ11 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R145 - EQ12 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R146 - EQ13 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R147 - EQ14 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R148 - EQ15 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R149 - EQ16 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R150 - EQ17 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R151wm8523_dai - EQ18 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R152 - EQ19 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R153 - EQ20 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R154 - EQ21 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R155 - EQ22 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R156 - EQ23 */
+ { 0xFFFF, 0xFFFF, 0 }, /* R157 - EQ24 */
+ { 0x0000, 0x0000, 0 }, /* R158 */
+ { 0x0000, 0x0000, 0 }, /* R159 */
+ { 0x0000, 0x0000, 0 }, /* R160 */
+ { 0x0002, 0x0002, 0 }, /* R161 - Control Interface Test 1 */
+ { 0x0000, 0x0000, 0 }, /* R162 */
+ { 0x0000, 0x0000, 0 }, /* R163 */
+ { 0x0000, 0x0000, 0 }, /* R164 */
+ { 0x0000, 0x0000, 0 }, /* R165 */
+ { 0x0000, 0x0000, 0 }, /* R166 */
+ { 0x0000, 0x0000, 0 }, /* R167 */
+ { 0x0000, 0x0000, 0 }, /* R168 */
+ { 0x0000, 0x0000, 0 }, /* R169 */
+ { 0x0000, 0x0000, 0 }, /* R170 */
+ { 0x0000, 0x0000, 0 }, /* R171 */
+ { 0x0000, 0x0000, 0 }, /* R172 */
+ { 0x0000, 0x0000, 0 }, /* R173 */
+ { 0x0000, 0x0000, 0 }, /* R174 */
+ { 0x0000, 0x0000, 0 }, /* R175 */
+ { 0x0000, 0x0000, 0 }, /* R176 */
+ { 0x0000, 0x0000, 0 }, /* R177 */
+ { 0x0000, 0x0000, 0 }, /* R178 */
+ { 0x0000, 0x0000, 0 }, /* R179 */
+ { 0x0000, 0x0000, 0 }, /* R180 */
+ { 0x0000, 0x0000, 0 }, /* R181 */
+ { 0x0000, 0x0000, 0 }, /* R182 */
+ { 0x0000, 0x0000, 0 }, /* R183 */
+ { 0x0000, 0x0000, 0 }, /* R184 */
+ { 0x0000, 0x0000, 0 }, /* R185 */
+ { 0x0000, 0x0000, 0 }, /* R186 */
+ { 0x0000, 0x0000, 0 }, /* R187 */
+ { 0x0000, 0x0000, 0 }, /* R188 */
+ { 0x0000, 0x0000, 0 }, /* R189 */
+ { 0x0000, 0x0000, 0 }, /* R190 */
+ { 0x0000, 0x0000, 0 }, /* R191 */
+ { 0x0000, 0x0000, 0 }, /* R192 */
+ { 0x0000, 0x0000, 0 }, /* R193 */
+ { 0x0000, 0x0000, 0 }, /* R194 */
+ { 0x0000, 0x0000, 0 }, /* R195 */
+ { 0x0000, 0x0000, 0 }, /* R196 */
+ { 0x0000, 0x0000, 0 }, /* R197 */
+ { 0x0000, 0x0000, 0 }, /* R198 */
+ { 0x0000, 0x0000, 0 }, /* R199 */
+ { 0x0000, 0x0000, 0 }, /* R200 */
+ { 0x0000, 0x0000, 0 }, /* R201 */
+ { 0x0000, 0x0000, 0 }, /* R202 */
+ { 0x0000, 0x0000, 0 }, /* R203 */
+ { 0x0070, 0x0070, 0 }, /* R204 - Analogue Output Bias 0 */
+ { 0x0000, 0x0000, 0 }, /* R205 */
+ { 0x0000, 0x0000, 0 }, /* R206 */
+ { 0x0000, 0x0000, 0 }, /* R207 */
+ { 0x0000, 0x0000, 0 }, /* R208 */
+ { 0x0000, 0x0000, 0 }, /* R209 */
+ { 0x0000, 0x0000, 0 }, /* R210 */
+ { 0x0000, 0x0000, 0 }, /* R211 */
+ { 0x0000, 0x0000, 0 }, /* R212 */
+ { 0x0000, 0x0000, 0 }, /* R213 */
+ { 0x0000, 0x0000, 0 }, /* R214 */
+ { 0x0000, 0x0000, 0 }, /* R215 */
+ { 0x0000, 0x0000, 0 }, /* R216 */
+ { 0x0000, 0x0000, 0 }, /* R217 */
+ { 0x0000, 0x0000, 0 }, /* R218 */
+ { 0x0000, 0x0000, 0 }, /* R219 */
+ { 0x0000, 0x0000, 0 }, /* R220 */
+ { 0x0000, 0x0000, 0 }, /* R221 */
+ { 0x0000, 0x0000, 0 }, /* R222 */
+ { 0x0000, 0x0000, 0 }, /* R223 */
+ { 0x0000, 0x0000, 0 }, /* R224 */
+ { 0x0000, 0x0000, 0 }, /* R225 */
+ { 0x0000, 0x0000, 0 }, /* R226 */
+ { 0x0000, 0x0000, 0 }, /* R227 */
+ { 0x0000, 0x0000, 0 }, /* R228 */
+ { 0x0000, 0x0000, 0 }, /* R229 */
+ { 0x0000, 0x0000, 0 }, /* R230 */
+ { 0x0000, 0x0000, 0 }, /* R231 */
+ { 0x0000, 0x0000, 0 }, /* R232 */
+ { 0x0000, 0x0000, 0 }, /* R233 */
+ { 0x0000, 0x0000, 0 }, /* R234 */
+ { 0x0000, 0x0000, 0 }, /* R235 */
+ { 0x0000, 0x0000, 0 }, /* R236 */
+ { 0x0000, 0x0000, 0 }, /* R237 */
+ { 0x0000, 0x0000, 0 }, /* R238 */
+ { 0x0000, 0x0000, 0 }, /* R239 */
+ { 0x0000, 0x0000, 0 }, /* R240 */
+ { 0x0000, 0x0000, 0 }, /* R241 */
+ { 0x0000, 0x0000, 0 }, /* R242 */
+ { 0x0000, 0x0000, 0 }, /* R243 */
+ { 0x0000, 0x0000, 0 }, /* R244 */
+ { 0x0000, 0x0000, 0 }, /* R245 */
+ { 0x0000, 0x0000, 0 }, /* R246 */
+ { 0x0001, 0x0001, 0 }, /* R247 - FLL NCO Test 0 */
+ { 0x003F, 0x003F, 0 }, /* R248 - FLL NCO Test 1 */
+};
+
+static int wm8904_volatile_register(unsigned int reg)
+{
+ return wm8904_access[reg].vol;
+}
+
+static int wm8904_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8904_SW_RESET_AND_ID, 0);
+}
+
+static int wm8904_configure_clocking(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ unsigned int clock0, clock2, rate;
+
+ /* Gate the clock while we're updating to avoid misclocking */
+ clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_SYSCLK_SRC, 0);
+
+ /* This should be done on init() for bypass paths */
+ switch (wm8904->sysclk_src) {
+ case WM8904_CLK_MCLK:
+ dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8904->mclk_rate);
+
+ clock2 &= ~WM8904_SYSCLK_SRC;
+ rate = wm8904->mclk_rate;
+
+ /* Ensure the FLL is stopped */
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+ break;
+
+ case WM8904_CLK_FLL:
+ dev_dbg(codec->dev, "Using %dHz FLL clock\n",
+ wm8904->fll_fout);
+
+ clock2 |= WM8904_SYSCLK_SRC;
+ rate = wm8904->fll_fout;
+ break;
+
+ default:
+ dev_err(codec->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ /* SYSCLK shouldn't be over 13.5MHz */
+ if (rate > 13500000) {
+ clock0 = WM8904_MCLK_DIV;
+ wm8904->sysclk_rate = rate / 2;
+ } else {
+ clock0 = 0;
+ wm8904->sysclk_rate = rate;
+ }
+
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0, WM8904_MCLK_DIV,
+ clock0);
+
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA | WM8904_SYSCLK_SRC, clock2);
+
+ dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8904->sysclk_rate);
+
+ return 0;
+}
+
+static void wm8904_set_drc(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int save, i;
+
+ /* Save any enables; the configuration should clear them. */
+ save = snd_soc_read(codec, WM8904_DRC_0);
+
+ for (i = 0; i < WM8904_DRC_REGS; i++)
+ snd_soc_update_bits(codec, WM8904_DRC_0 + i, 0xffff,
+ pdata->drc_cfgs[wm8904->drc_cfg].regs[i]);
+
+ /* Reenable the DRC */
+ snd_soc_update_bits(codec, WM8904_DRC_0,
+ WM8904_DRC_ENA | WM8904_DRC_DAC_PATH, save);
+}
+
+static int wm8904_put_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int value = ucontrol->value.integer.value[0];
+
+ if (value >= pdata->num_drc_cfgs)
+ return -EINVAL;
+
+ wm8904->drc_cfg = value;
+
+ wm8904_set_drc(codec);
+
+ return 0;
+}
+
+static int wm8904_get_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+
+ ucontrol->value.enumerated.item[0] = wm8904->drc_cfg;
+
+ return 0;
+}
+
+static void wm8904_set_retune_mobile(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int best, best_val, save, i, cfg;
+
+ if (!pdata || !wm8904->num_retune_mobile_texts)
+ return;
+
+ /* Find the version of the currently selected configuration
+ * with the nearest sample rate. */
+ cfg = wm8904->retune_mobile_cfg;
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8904->retune_mobile_texts[cfg]) == 0 &&
+ abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8904->fs) < best_val) {
+ best = i;
+ best_val = abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8904->fs);
+ }
+ }
+
+ dev_dbg(codec->dev, "ReTune Mobile %s/%dHz for %dHz sample rate\n",
+ pdata->retune_mobile_cfgs[best].name,
+ pdata->retune_mobile_cfgs[best].rate,
+ wm8904->fs);
+
+ /* The EQ will be disabled while reconfiguring it, remember the
+ * current configuration.
+ */
+ save = snd_soc_read(codec, WM8904_EQ1);
+
+ for (i = 0; i < WM8904_EQ_REGS; i++)
+ snd_soc_update_bits(codec, WM8904_EQ1 + i, 0xffff,
+ pdata->retune_mobile_cfgs[best].regs[i]);
+
+ snd_soc_update_bits(codec, WM8904_EQ1, WM8904_EQ_ENA, save);
+}
+
+static int wm8904_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int value = ucontrol->value.integer.value[0];
+
+ if (value >= pdata->num_retune_mobile_cfgs)
+ return -EINVAL;
+
+ wm8904->retune_mobile_cfg = value;
+
+ wm8904_set_retune_mobile(codec);
+
+ return 0;
+}
+
+static int wm8904_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+
+ ucontrol->value.enumerated.item[0] = wm8904->retune_mobile_cfg;
+
+ return 0;
+}
+
+static int deemph_settings[] = { 0, 32000, 44100, 48000 };
+
+static int wm8904_set_deemph(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int val, i, best;
+
+ /* If we're using deemphasis select the nearest available sample
+ * rate.
+ */
+ if (wm8904->deemph) {
+ best = 1;
+ for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
+ if (abs(deemph_settings[i] - wm8904->fs) <
+ abs(deemph_settings[best] - wm8904->fs))
+ best = i;
+ }
+
+ val = best << WM8904_DEEMPH_SHIFT;
+ } else {
+ val = 0;
+ }
+
+ dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+
+ return snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
+ WM8904_DEEMPH_MASK, val);
+}
+
+static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+
+ return wm8904->deemph;
+}
+
+static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int deemph = ucontrol->value.enumerated.item[0];
+
+ if (deemph > 1)
+ return -EINVAL;
+
+ wm8904->deemph = deemph;
+
+ return wm8904_set_deemph(codec);
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const char *input_mode_text[] = {
+ "Single-Ended", "Differential Line", "Differential Mic"
+};
+
+static const struct soc_enum lin_mode =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
+
+static const struct soc_enum rin_mode =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
+
+static const char *hpf_mode_text[] = {
+ "Hi-fi", "Voice 1", "Voice 2", "Voice 3"
+};
+
+static const struct soc_enum hpf_mode =
+ SOC_ENUM_SINGLE(WM8904_ADC_DIGITAL_0, 5, 4, hpf_mode_text);
+
+static const struct snd_kcontrol_new wm8904_adc_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8904_ADC_DIGITAL_VOLUME_LEFT,
+ WM8904_ADC_DIGITAL_VOLUME_RIGHT, 1, 119, 0, digital_tlv),
+
+SOC_ENUM("Left Caputure Mode", lin_mode),
+SOC_ENUM("Right Capture Mode", rin_mode),
+
+/* No TLV since it depends on mode */
+SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
+ WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
+SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
+ WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
+
+SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
+SOC_ENUM("High Pass Filter Mode", hpf_mode),
+
+SOC_SINGLE("ADC 128x OSR Switch", WM8904_ANALOGUE_ADC_0, 0, 1, 0),
+};
+
+static const char *drc_path_text[] = {
+ "ADC", "DAC"
+};
+
+static const struct soc_enum drc_path =
+ SOC_ENUM_SINGLE(WM8904_DRC_0, 14, 2, drc_path_text);
+
+static const struct snd_kcontrol_new wm8904_dac_snd_controls[] = {
+SOC_SINGLE_TLV("Digital Playback Boost Volume",
+ WM8904_AUDIO_INTERFACE_0, 9, 3, 0, dac_boost_tlv),
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8904_DAC_DIGITAL_VOLUME_LEFT,
+ WM8904_DAC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 0, 63, 0, out_tlv),
+SOC_DOUBLE_R("Headphone Switch", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8904_ANALOGUE_OUT1_LEFT,
+ WM8904_ANALOGUE_OUT1_RIGHT, 6, 1, 0),
+
+SOC_DOUBLE_R_TLV("Line Output Volume", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 0, 63, 0, out_tlv),
+SOC_DOUBLE_R("Line Output Switch", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Line Output ZC Switch", WM8904_ANALOGUE_OUT2_LEFT,
+ WM8904_ANALOGUE_OUT2_RIGHT, 6, 1, 0),
+
+SOC_SINGLE("EQ Switch", WM8904_EQ1, 0, 1, 0),
+SOC_SINGLE("DRC Switch", WM8904_DRC_0, 15, 1, 0),
+SOC_ENUM("DRC Path", drc_path),
+SOC_SINGLE("DAC OSRx2 Switch", WM8904_DAC_DIGITAL_1, 6, 1, 0),
+SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
+ wm8904_get_deemph, wm8904_put_deemph),
+};
+
+static const struct snd_kcontrol_new wm8904_snd_controls[] = {
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8904_DAC_DIGITAL_0, 4, 8, 15, 0,
+ sidetone_tlv),
+};
+
+static const struct snd_kcontrol_new wm8904_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM8904_EQ2, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM8904_EQ3, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM8904_EQ4, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM8904_EQ5, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM8904_EQ6, 0, 24, 0, eq_tlv),
+};
+
+static int cp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ BUG_ON(event != SND_SOC_DAPM_POST_PMU);
+
+ /* Maximum startup time */
+ udelay(500);
+
+ return 0;
+}
+
+static int sysclk_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8904_priv *wm8904 = codec->private_data;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* If we're using the FLL then we only start it when
+ * required; we assume that the configuration has been
+ * done previously and all we need to do is kick it
+ * off.
+ */
+ switch (wm8904->sysclk_src) {
+ case WM8904_CLK_FLL:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA,
+ WM8904_FLL_OSC_ENA);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_ENA,
+ WM8904_FLL_ENA);
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static int out_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int reg, val;
+ int dcs_mask;
+ int dcs_l, dcs_r;
+ int dcs_l_reg, dcs_r_reg;
+ int timeout;
+ int pwr_reg;
+
+ /* This code is shared between HP and LINEOUT; we do all our
+ * power management in stereo pairs to avoid latency issues so
+ * we reuse shift to identify which rather than strcmp() the
+ * name. */
+ reg = w->shift;
+
+ switch (reg) {
+ case WM8904_ANALOGUE_HP_0:
+ pwr_reg = WM8904_POWER_MANAGEMENT_2;
+ dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
+ dcs_r_reg = WM8904_DC_SERVO_8;
+ dcs_l_reg = WM8904_DC_SERVO_9;
+ dcs_l = 0;
+ dcs_r = 1;
+ break;
+ case WM8904_ANALOGUE_LINEOUT_0:
+ pwr_reg = WM8904_POWER_MANAGEMENT_3;
+ dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
+ dcs_r_reg = WM8904_DC_SERVO_6;
+ dcs_l_reg = WM8904_DC_SERVO_7;
+ dcs_l = 2;
+ dcs_r = 3;
+ break;
+ default:
+ BUG();
+ return -EINVAL;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* Power on the PGAs */
+ snd_soc_update_bits(codec, pwr_reg,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA);
+
+ /* Power on the amplifier */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA | WM8904_HPR_ENA,
+ WM8904_HPL_ENA | WM8904_HPR_ENA);
+
+
+ /* Enable the first stage */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY,
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY);
+
+ /* Power up the DC servo */
+ snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
+ dcs_mask, dcs_mask);
+
+ /* Either calibrate the DC servo or restore cached state
+ * if we have that.
+ */
+ if (wm8904->dcs_state[dcs_l] || wm8904->dcs_state[dcs_r]) {
+ dev_dbg(codec->dev, "Restoring DC servo state\n");
+
+ snd_soc_write(codec, dcs_l_reg,
+ wm8904->dcs_state[dcs_l]);
+ snd_soc_write(codec, dcs_r_reg,
+ wm8904->dcs_state[dcs_r]);
+
+ snd_soc_write(codec, WM8904_DC_SERVO_1, dcs_mask);
+
+ timeout = 20;
+ } else {
+ dev_dbg(codec->dev, "Calibrating DC servo\n");
+
+ snd_soc_write(codec, WM8904_DC_SERVO_1,
+ dcs_mask << WM8904_DCS_TRIG_STARTUP_0_SHIFT);
+
+ timeout = 500;
+ }
+
+ /* Wait for DC servo to complete */
+ dcs_mask <<= WM8904_DCS_CAL_COMPLETE_SHIFT;
+ do {
+ val = snd_soc_read(codec, WM8904_DC_SERVO_READBACK_0);
+ if ((val & dcs_mask) == dcs_mask)
+ break;
+
+ msleep(1);
+ } while (--timeout);
+
+ if ((val & dcs_mask) != dcs_mask)
+ dev_warn(codec->dev, "DC servo timed out\n");
+ else
+ dev_dbg(codec->dev, "DC servo ready\n");
+
+ /* Enable the output stage */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
+ break;
+
+ case SND_SOC_DAPM_POST_PMU:
+ /* Unshort the output itself */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT);
+
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ /* Short the output */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_RMV_SHORT |
+ WM8904_HPR_RMV_SHORT, 0);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ /* Cache the DC servo configuration; this will be
+ * invalidated if we change the configuration. */
+ wm8904->dcs_state[dcs_l] = snd_soc_read(codec, dcs_l_reg);
+ wm8904->dcs_state[dcs_r] = snd_soc_read(codec, dcs_r_reg);
+
+ snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
+ dcs_mask, 0);
+
+ /* Disable the amplifier input and output stages */
+ snd_soc_update_bits(codec, reg,
+ WM8904_HPL_ENA | WM8904_HPR_ENA |
+ WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY |
+ WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
+ 0);
+
+ /* PGAs too */
+ snd_soc_update_bits(codec, pwr_reg,
+ WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
+ 0);
+ break;
+ }
+
+ return 0;
+}
+
+static const char *lin_text[] = {
+ "IN1L", "IN2L", "IN3L"
+};
+
+static const struct soc_enum lin_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 2, 3, lin_text);
+
+static const struct snd_kcontrol_new lin_mux =
+ SOC_DAPM_ENUM("Left Capture Mux", lin_enum);
+
+static const struct soc_enum lin_inv_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 4, 3, lin_text);
+
+static const struct snd_kcontrol_new lin_inv_mux =
+ SOC_DAPM_ENUM("Left Capture Inveting Mux", lin_inv_enum);
+
+static const char *rin_text[] = {
+ "IN1R", "IN2R", "IN3R"
+};
+
+static const struct soc_enum rin_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 2, 3, rin_text);
+
+static const struct snd_kcontrol_new rin_mux =
+ SOC_DAPM_ENUM("Right Capture Mux", rin_enum);
+
+static const struct soc_enum rin_inv_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 4, 3, rin_text);
+
+static const struct snd_kcontrol_new rin_inv_mux =
+ SOC_DAPM_ENUM("Right Capture Inveting Mux", rin_inv_enum);
+
+static const char *aif_text[] = {
+ "Left", "Right"
+};
+
+static const struct soc_enum aifoutl_enum =
+ SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 7, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutl_mux =
+ SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
+
+static const struct soc_enum aifoutr_enum =
+ SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 6, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutr_mux =
+ SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
+
+static const struct soc_enum aifinl_enum =
+ SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 5, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinl_mux =
+ SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
+
+static const struct soc_enum aifinr_enum =
+ SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 4, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinr_mux =
+ SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
+
+static const struct snd_soc_dapm_widget wm8904_core_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("SYSCLK", WM8904_CLOCK_RATES_2, 2, 0, sysclk_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8904_CLOCK_RATES_2, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8904_CLOCK_RATES_2, 0, 0, NULL, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8904_adc_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1L"),
+SND_SOC_DAPM_INPUT("IN1R"),
+SND_SOC_DAPM_INPUT("IN2L"),
+SND_SOC_DAPM_INPUT("IN2R"),
+SND_SOC_DAPM_INPUT("IN3L"),
+SND_SOC_DAPM_INPUT("IN3R"),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS", WM8904_MIC_BIAS_CONTROL_0, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lin_mux),
+SND_SOC_DAPM_MUX("Left Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &lin_inv_mux),
+SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rin_mux),
+SND_SOC_DAPM_MUX("Right Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
+ &rin_inv_mux),
+
+SND_SOC_DAPM_PGA("Left Capture PGA", WM8904_POWER_MANAGEMENT_0, 1, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("Right Capture PGA", WM8904_POWER_MANAGEMENT_0, 0, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", NULL, WM8904_POWER_MANAGEMENT_6, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", NULL, WM8904_POWER_MANAGEMENT_6, 0, 0),
+
+SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
+SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
+
+SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8904_dac_dapm_widgets[] = {
+SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
+SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
+
+SND_SOC_DAPM_DAC("DACL", NULL, WM8904_POWER_MANAGEMENT_6, 3, 0),
+SND_SOC_DAPM_DAC("DACR", NULL, WM8904_POWER_MANAGEMENT_6, 2, 0),
+
+SND_SOC_DAPM_SUPPLY("Charge pump", WM8904_CHARGE_PUMP_0, 0, 0, cp_event,
+ SND_SOC_DAPM_POST_PMU),
+
+SND_SOC_DAPM_PGA("HPL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("HPR PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("LINEL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LINER PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, WM8904_ANALOGUE_HP_0,
+ 0, NULL, 0, out_pga_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Line Output", SND_SOC_NOPM, WM8904_ANALOGUE_LINEOUT_0,
+ 0, NULL, 0, out_pga_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+SND_SOC_DAPM_OUTPUT("LINEOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEOUTR"),
+};
+
+static const char *out_mux_text[] = {
+ "DAC", "Bypass"
+};
+
+static const struct soc_enum hpl_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 3, 2, out_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ SOC_DAPM_ENUM("HPL Mux", hpl_enum);
+
+static const struct soc_enum hpr_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 2, 2, out_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ SOC_DAPM_ENUM("HPR Mux", hpr_enum);
+
+static const struct soc_enum linel_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 1, 2, out_mux_text);
+
+static const struct snd_kcontrol_new linel_mux =
+ SOC_DAPM_ENUM("LINEL Mux", linel_enum);
+
+static const struct soc_enum liner_enum =
+ SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 0, 2, out_mux_text);
+
+static const struct snd_kcontrol_new liner_mux =
+ SOC_DAPM_ENUM("LINEL Mux", liner_enum);
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static const struct soc_enum dacl_sidetone_enum =
+ SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 2, 3, sidetone_text);
+
+static const struct snd_kcontrol_new dacl_sidetone_mux =
+ SOC_DAPM_ENUM("Left Sidetone Mux", dacl_sidetone_enum);
+
+static const struct soc_enum dacr_sidetone_enum =
+ SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 0, 3, sidetone_text);
+
+static const struct snd_kcontrol_new dacr_sidetone_mux =
+ SOC_DAPM_ENUM("Right Sidetone Mux", dacr_sidetone_enum);
+
+static const struct snd_soc_dapm_widget wm8904_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("Class G", WM8904_CLASS_W_0, 0, 1, NULL, 0),
+SND_SOC_DAPM_PGA("Left Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &dacl_sidetone_mux),
+SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &dacr_sidetone_mux),
+
+SND_SOC_DAPM_MUX("HPL Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("HPR Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+SND_SOC_DAPM_MUX("LINEL Mux", SND_SOC_NOPM, 0, 0, &linel_mux),
+SND_SOC_DAPM_MUX("LINER Mux", SND_SOC_NOPM, 0, 0, &liner_mux),
+};
+
+static const struct snd_soc_dapm_route core_intercon[] = {
+ { "CLK_DSP", NULL, "SYSCLK" },
+ { "TOCLK", NULL, "SYSCLK" },
+};
+
+static const struct snd_soc_dapm_route adc_intercon[] = {
+ { "Left Capture Mux", "IN1L", "IN1L" },
+ { "Left Capture Mux", "IN2L", "IN2L" },
+ { "Left Capture Mux", "IN3L", "IN3L" },
+
+ { "Left Capture Inverting Mux", "IN1L", "IN1L" },
+ { "Left Capture Inverting Mux", "IN2L", "IN2L" },
+ { "Left Capture Inverting Mux", "IN3L", "IN3L" },
+
+ { "Right Capture Mux", "IN1R", "IN1R" },
+ { "Right Capture Mux", "IN2R", "IN2R" },
+ { "Right Capture Mux", "IN3R", "IN3R" },
+
+ { "Right Capture Inverting Mux", "IN1R", "IN1R" },
+ { "Right Capture Inverting Mux", "IN2R", "IN2R" },
+ { "Right Capture Inverting Mux", "IN3R", "IN3R" },
+
+ { "Left Capture PGA", NULL, "Left Capture Mux" },
+ { "Left Capture PGA", NULL, "Left Capture Inverting Mux" },
+
+ { "Right Capture PGA", NULL, "Right Capture Mux" },
+ { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
+
+ { "AIFOUTL", "Left", "ADCL" },
+ { "AIFOUTL", "Right", "ADCR" },
+ { "AIFOUTR", "Left", "ADCL" },
+ { "AIFOUTR", "Right", "ADCR" },
+
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCL", NULL, "Left Capture PGA" },
+
+ { "ADCR", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "Right Capture PGA" },
+};
+
+static const struct snd_soc_dapm_route dac_intercon[] = {
+ { "DACL", "Right", "AIFINR" },
+ { "DACL", "Left", "AIFINL" },
+ { "DACL", NULL, "CLK_DSP" },
+
+ { "DACR", "Right", "AIFINR" },
+ { "DACR", "Left", "AIFINL" },
+ { "DACR", NULL, "CLK_DSP" },
+
+ { "Charge pump", NULL, "SYSCLK" },
+
+ { "Headphone Output", NULL, "HPL PGA" },
+ { "Headphone Output", NULL, "HPR PGA" },
+ { "Headphone Output", NULL, "Charge pump" },
+ { "Headphone Output", NULL, "TOCLK" },
+
+ { "Line Output", NULL, "LINEL PGA" },
+ { "Line Output", NULL, "LINER PGA" },
+ { "Line Output", NULL, "Charge pump" },
+ { "Line Output", NULL, "TOCLK" },
+
+ { "HPOUTL", NULL, "Headphone Output" },
+ { "HPOUTR", NULL, "Headphone Output" },
+
+ { "LINEOUTL", NULL, "Line Output" },
+ { "LINEOUTR", NULL, "Line Output" },
+};
+
+static const struct snd_soc_dapm_route wm8904_intercon[] = {
+ { "Left Sidetone", "Left", "ADCL" },
+ { "Left Sidetone", "Right", "ADCR" },
+ { "DACL", NULL, "Left Sidetone" },
+
+ { "Right Sidetone", "Left", "ADCL" },
+ { "Right Sidetone", "Right", "ADCR" },
+ { "DACR", NULL, "Right Sidetone" },
+
+ { "Left Bypass", NULL, "Class G" },
+ { "Left Bypass", NULL, "Left Capture PGA" },
+
+ { "Right Bypass", NULL, "Class G" },
+ { "Right Bypass", NULL, "Right Capture PGA" },
+
+ { "HPL Mux", "DAC", "DACL" },
+ { "HPL Mux", "Bypass", "Left Bypass" },
+
+ { "HPR Mux", "DAC", "DACR" },
+ { "HPR Mux", "Bypass", "Right Bypass" },
+
+ { "LINEL Mux", "DAC", "DACL" },
+ { "LINEL Mux", "Bypass", "Left Bypass" },
+
+ { "LINER Mux", "DAC", "DACR" },
+ { "LINER Mux", "Bypass", "Right Bypass" },
+
+ { "HPL PGA", NULL, "HPL Mux" },
+ { "HPR PGA", NULL, "HPR Mux" },
+
+ { "LINEL PGA", NULL, "LINEL Mux" },
+ { "LINER PGA", NULL, "LINER Mux" },
+};
+
+static const struct snd_soc_dapm_route wm8912_intercon[] = {
+ { "HPL PGA", NULL, "DACL" },
+ { "HPR PGA", NULL, "DACR" },
+
+ { "LINEL PGA", NULL, "DACL" },
+ { "LINER PGA", NULL, "DACR" },
+};
+
+static int wm8904_add_widgets(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+
+ snd_soc_dapm_new_controls(codec, wm8904_core_dapm_widgets,
+ ARRAY_SIZE(wm8904_core_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, core_intercon,
+ ARRAY_SIZE(core_intercon));
+
+ switch (wm8904->devtype) {
+ case WM8904:
+ snd_soc_add_controls(codec, wm8904_adc_snd_controls,
+ ARRAY_SIZE(wm8904_adc_snd_controls));
+ snd_soc_add_controls(codec, wm8904_dac_snd_controls,
+ ARRAY_SIZE(wm8904_dac_snd_controls));
+ snd_soc_add_controls(codec, wm8904_snd_controls,
+ ARRAY_SIZE(wm8904_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, wm8904_adc_dapm_widgets,
+ ARRAY_SIZE(wm8904_adc_dapm_widgets));
+ snd_soc_dapm_new_controls(codec, wm8904_dac_dapm_widgets,
+ ARRAY_SIZE(wm8904_dac_dapm_widgets));
+ snd_soc_dapm_new_controls(codec, wm8904_dapm_widgets,
+ ARRAY_SIZE(wm8904_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, core_intercon,
+ ARRAY_SIZE(core_intercon));
+ snd_soc_dapm_add_routes(codec, adc_intercon,
+ ARRAY_SIZE(adc_intercon));
+ snd_soc_dapm_add_routes(codec, dac_intercon,
+ ARRAY_SIZE(dac_intercon));
+ snd_soc_dapm_add_routes(codec, wm8904_intercon,
+ ARRAY_SIZE(wm8904_intercon));
+ break;
+
+ case WM8912:
+ snd_soc_add_controls(codec, wm8904_dac_snd_controls,
+ ARRAY_SIZE(wm8904_dac_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, wm8904_dac_dapm_widgets,
+ ARRAY_SIZE(wm8904_dac_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, dac_intercon,
+ ARRAY_SIZE(dac_intercon));
+ snd_soc_dapm_add_routes(codec, wm8912_intercon,
+ ARRAY_SIZE(wm8912_intercon));
+ break;
+ }
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static struct {
+ int ratio;
+ unsigned int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 786, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 1 },
+ { 16000, 2 },
+ { 22050, 3 },
+ { 24000, 3 },
+ { 32000, 4 },
+ { 44100, 5 },
+ { 48000, 5 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 50, 5 },
+ { 55, 6 },
+ { 60, 7 },
+ { 80, 8 },
+ { 100, 9 },
+ { 110, 10 },
+ { 120, 11 },
+ { 160, 12 },
+ { 200, 13 },
+ { 220, 14 },
+ { 240, 16 },
+ { 200, 17 },
+ { 320, 18 },
+ { 440, 19 },
+ { 480, 20 },
+};
+
+
+static int wm8904_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int ret, i, best, best_val, cur_val;
+ unsigned int aif1 = 0;
+ unsigned int aif2 = 0;
+ unsigned int aif3 = 0;
+ unsigned int clock1 = 0;
+ unsigned int dac_digital1 = 0;
+
+ /* What BCLK do we need? */
+ wm8904->fs = params_rate(params);
+ if (wm8904->tdm_slots) {
+ dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
+ wm8904->tdm_slots, wm8904->tdm_width);
+ wm8904->bclk = snd_soc_calc_bclk(wm8904->fs,
+ wm8904->tdm_width, 2,
+ wm8904->tdm_slots);
+ } else {
+ wm8904->bclk = snd_soc_params_to_bclk(params);
+ }
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ aif1 |= 0x40;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ aif1 |= 0x80;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ aif1 |= 0xc0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8904->bclk);
+
+ ret = wm8904_configure_clocking(codec);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm8904->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm8904->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm8904->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm8904->fs);;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clock1 |= (clk_sys_rates[best].clk_sys_rate
+ << WM8904_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm8904->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm8904->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clock1 |= (sample_rates[best].sample_rate
+ << WM8904_SAMPLE_RATE_SHIFT);
+
+ /* Enable sloping stopband filter for low sample rates */
+ if (wm8904->fs <= 24000)
+ dac_digital1 |= WM8904_DAC_SB_FILT;
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm8904->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm8904->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm8904->bclk = (wm8904->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm8904->bclk);
+ aif2 |= bclk_divs[best].bclk_div;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8904->bclk / wm8904->fs);
+ aif3 |= wm8904->bclk / wm8904->fs;
+
+ /* Apply the settings */
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
+ WM8904_DAC_SB_FILT, dac_digital1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIF_WL_MASK, aif1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_2,
+ WM8904_BCLK_DIV_MASK, aif2);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
+ WM8904_LRCLK_RATE_MASK, aif3);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_1,
+ WM8904_SAMPLE_RATE_MASK |
+ WM8904_CLK_SYS_RATE_MASK, clock1);
+
+ /* Update filters for the new settings */
+ wm8904_set_retune_mobile(codec);
+ wm8904_set_deemph(codec);
+
+ return 0;
+}
+
+
+static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *priv = codec->private_data;
+
+ switch (clk_id) {
+ case WM8904_CLK_MCLK:
+ priv->sysclk_src = clk_id;
+ priv->mclk_rate = freq;
+ break;
+
+ case WM8904_CLK_FLL:
+ priv->sysclk_src = clk_id;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
+
+ wm8904_configure_clocking(codec);
+
+ return 0;
+}
+
+static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ unsigned int aif1 = 0;
+ unsigned int aif3 = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif3 |= WM8904_LRCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8904_BCLK_DIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8904_BCLK_DIR;
+ aif3 |= WM8904_LRCLK_DIR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= WM8904_AIF_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x3;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x2;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8904_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8904_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8904_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV |
+ WM8904_AIF_FMT_MASK | WM8904_BCLK_DIR, aif1);
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
+ WM8904_LRCLK_DIR, aif3);
+
+ return 0;
+}
+
+
+static int wm8904_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int aif1 = 0;
+
+ /* Don't need to validate anything if we're turning off TDM */
+ if (slots == 0)
+ goto out;
+
+ /* Note that we allow configurations we can't handle ourselves -
+ * for example, we can generate clocks for slots 2 and up even if
+ * we can't use those slots ourselves.
+ */
+ aif1 |= WM8904_AIFADC_TDM | WM8904_AIFDAC_TDM;
+
+ switch (rx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8904_AIFADC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ switch (tx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8904_AIFDAC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+out:
+ wm8904->tdm_width = slot_width;
+ wm8904->tdm_slots = slots / 2;
+
+ snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
+ WM8904_AIFADC_TDM | WM8904_AIFADC_TDM_CHAN |
+ WM8904_AIFDAC_TDM | WM8904_AIFDAC_TDM_CHAN, aif1);
+
+ return 0;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ fll_div->fll_clk_ref_div = 0;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+ fll_div->fll_clk_ref_div++;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 4;
+ while (Fout * div < 90000000) {
+ div++;
+ if (div > 64) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ target = Fout * div;
+ fll_div->fll_outdiv = div - 1;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8904_priv *wm8904 = codec->private_data;
+ struct _fll_div fll_div;
+ int ret, val;
+ int clock2, fll1;
+
+ /* Any change? */
+ if (source == wm8904->fll_src && Fref == wm8904->fll_fref &&
+ Fout == wm8904->fll_fout)
+ return 0;
+
+ clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
+
+ if (Fout == 0) {
+ dev_dbg(codec->dev, "FLL disabled\n");
+
+ wm8904->fll_fref = 0;
+ wm8904->fll_fout = 0;
+
+ /* Gate SYSCLK to avoid glitches */
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, 0);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+
+ goto out;
+ }
+
+ /* Validate the FLL ID */
+ switch (source) {
+ case WM8904_FLL_MCLK:
+ case WM8904_FLL_LRCLK:
+ case WM8904_FLL_BCLK:
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+ break;
+
+ case WM8904_FLL_FREE_RUNNING:
+ dev_dbg(codec->dev, "Using free running FLL\n");
+ /* Force 12MHz and output/4 for now */
+ Fout = 12000000;
+ Fref = 12000000;
+
+ memset(&fll_div, 0, sizeof(fll_div));
+ fll_div.fll_outdiv = 3;
+ break;
+
+ default:
+ dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Save current state then disable the FLL and SYSCLK to avoid
+ * misclocking */
+ fll1 = snd_soc_read(codec, WM8904_FLL_CONTROL_1);
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, 0);
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
+
+ /* Unlock forced oscilator control to switch it on/off */
+ snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
+ WM8904_USER_KEY, WM8904_USER_KEY);
+
+ if (fll_id == WM8904_FLL_FREE_RUNNING) {
+ val = WM8904_FLL_FRC_NCO;
+ } else {
+ val = 0;
+ }
+
+ snd_soc_update_bits(codec, WM8904_FLL_NCO_TEST_1, WM8904_FLL_FRC_NCO,
+ val);
+ snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
+ WM8904_USER_KEY, 0);
+
+ switch (fll_id) {
+ case WM8904_FLL_MCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 0);
+ break;
+
+ case WM8904_FLL_LRCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 1);
+ break;
+
+ case WM8904_FLL_BCLK:
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_SRC_MASK, 2);
+ break;
+ }
+
+ if (fll_div.k)
+ val = WM8904_FLL_FRACN_ENA;
+ else
+ val = 0;
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_FRACN_ENA, val);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_2,
+ WM8904_FLL_OUTDIV_MASK | WM8904_FLL_FRATIO_MASK,
+ (fll_div.fll_outdiv << WM8904_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8904_FLL_FRATIO_SHIFT));
+
+ snd_soc_write(codec, WM8904_FLL_CONTROL_3, fll_div.k);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_4, WM8904_FLL_N_MASK,
+ fll_div.n << WM8904_FLL_N_SHIFT);
+
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
+ WM8904_FLL_CLK_REF_DIV_MASK,
+ fll_div.fll_clk_ref_div
+ << WM8904_FLL_CLK_REF_DIV_SHIFT);
+
+ dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
+
+ wm8904->fll_fref = Fref;
+ wm8904->fll_fout = Fout;
+ wm8904->fll_src = source;
+
+ /* Enable the FLL if it was previously active */
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_OSC_ENA, fll1);
+ snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
+ WM8904_FLL_ENA, fll1);
+
+out:
+ /* Reenable SYSCLK if it was previously active */
+ snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
+ WM8904_CLK_SYS_ENA, clock2);
+
+ return 0;
+}
+
+static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int val;
+
+ if (mute)
+ val = WM8904_DAC_MUTE;
+ else
+ val = 0;
+
+ snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1, WM8904_DAC_MUTE, val);
+
+ return 0;
+}
+
+static void wm8904_sync_cache(struct snd_soc_codec *codec)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int i;
+
+ if (!codec->cache_sync)
+ return;
+
+ codec->cache_only = 0;
+
+ /* Sync back cached values if they're different from the
+ * hardware default.
+ */
+ for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
+ if (!wm8904_access[i].writable)
+ continue;
+
+ if (wm8904->reg_cache[i] == wm8904_reg[i])
+ continue;
+
+ snd_soc_write(codec, i, wm8904->reg_cache[i]);
+ }
+
+ codec->cache_sync = 0;
+}
+
+static int wm8904_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8904_priv *wm8904 = codec->private_data;
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID resistance 2*50k */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK,
+ 0x1 << WM8904_VMID_RES_SHIFT);
+
+ /* Normal bias current */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_ISEL_MASK, 2 << WM8904_ISEL_SHIFT);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ wm8904_sync_cache(codec);
+
+ /* Enable bias */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_BIAS_ENA, WM8904_BIAS_ENA);
+
+ /* Enable VMID, VMID buffering, 2*5k resistance */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_ENA |
+ WM8904_VMID_RES_MASK,
+ WM8904_VMID_ENA |
+ 0x3 << WM8904_VMID_RES_SHIFT);
+
+ /* Let VMID ramp */
+ msleep(1);
+ }
+
+ /* Maintain VMID with 2*250k */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK,
+ 0x2 << WM8904_VMID_RES_SHIFT);
+
+ /* Bias current *0.5 */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_ISEL_MASK, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Turn off VMID */
+ snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
+ WM8904_VMID_RES_MASK | WM8904_VMID_ENA, 0);
+
+ /* Stop bias generation */
+ snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
+ WM8904_BIAS_ENA, 0);
+
+#ifdef CONFIG_REGULATOR
+ /* Post 2.6.34 we will be able to get a callback when
+ * the regulators are disabled which we can use but
+ * for now just assume that the power will be cut if
+ * the regulator API is in use.
+ */
+ codec->cache_sync = 1;
+#endif
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8904_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8904_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8904_dai_ops = {
+ .set_sysclk = wm8904_set_sysclk,
+ .set_fmt = wm8904_set_fmt,
+ .set_tdm_slot = wm8904_set_tdm_slot,
+ .set_pll = wm8904_set_fll,
+ .hw_params = wm8904_hw_params,
+ .digital_mute = wm8904_digital_mute,
+};
+
+struct snd_soc_dai wm8904_dai = {
+ .name = "WM8904",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8904_RATES,
+ .formats = WM8904_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8904_RATES,
+ .formats = WM8904_FORMATS,
+ },
+ .ops = &wm8904_dai_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8904_dai);
+
+#ifdef CONFIG_PM
+static int wm8904_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8904_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8904_suspend NULL
+#define wm8904_resume NULL
+#endif
+
+static void wm8904_handle_retune_mobile_pdata(struct wm8904_priv *wm8904)
+{
+ struct snd_soc_codec *codec = &wm8904->codec;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ struct snd_kcontrol_new control =
+ SOC_ENUM_EXT("EQ Mode",
+ wm8904->retune_mobile_enum,
+ wm8904_get_retune_mobile_enum,
+ wm8904_put_retune_mobile_enum);
+ int ret, i, j;
+ const char **t;
+
+ /* We need an array of texts for the enum API but the number
+ * of texts is likely to be less than the number of
+ * configurations due to the sample rate dependency of the
+ * configurations. */
+ wm8904->num_retune_mobile_texts = 0;
+ wm8904->retune_mobile_texts = NULL;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ for (j = 0; j < wm8904->num_retune_mobile_texts; j++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8904->retune_mobile_texts[j]) == 0)
+ break;
+ }
+
+ if (j != wm8904->num_retune_mobile_texts)
+ continue;
+
+ /* Expand the array... */
+ t = krealloc(wm8904->retune_mobile_texts,
+ sizeof(char *) *
+ (wm8904->num_retune_mobile_texts + 1),
+ GFP_KERNEL);
+ if (t == NULL)
+ continue;
+
+ /* ...store the new entry... */
+ t[wm8904->num_retune_mobile_texts] =
+ pdata->retune_mobile_cfgs[i].name;
+
+ /* ...and remember the new version. */
+ wm8904->num_retune_mobile_texts++;
+ wm8904->retune_mobile_texts = t;
+ }
+
+ dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
+ wm8904->num_retune_mobile_texts);
+
+ wm8904->retune_mobile_enum.max = wm8904->num_retune_mobile_texts;
+ wm8904->retune_mobile_enum.texts = wm8904->retune_mobile_texts;
+
+ ret = snd_soc_add_controls(&wm8904->codec, &control, 1);
+ if (ret != 0)
+ dev_err(wm8904->codec.dev,
+ "Failed to add ReTune Mobile control: %d\n", ret);
+}
+
+static void wm8904_handle_pdata(struct wm8904_priv *wm8904)
+{
+ struct snd_soc_codec *codec = &wm8904->codec;
+ struct wm8904_pdata *pdata = wm8904->pdata;
+ int ret, i;
+
+ if (!pdata) {
+ snd_soc_add_controls(&wm8904->codec, wm8904_eq_controls,
+ ARRAY_SIZE(wm8904_eq_controls));
+ return;
+ }
+
+ dev_dbg(codec->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
+
+ if (pdata->num_drc_cfgs) {
+ struct snd_kcontrol_new control =
+ SOC_ENUM_EXT("DRC Mode", wm8904->drc_enum,
+ wm8904_get_drc_enum, wm8904_put_drc_enum);
+
+ /* We need an array of texts for the enum API */
+ wm8904->drc_texts = kmalloc(sizeof(char *)
+ * pdata->num_drc_cfgs, GFP_KERNEL);
+ if (!wm8904->drc_texts) {
+ dev_err(wm8904->codec.dev,
+ "Failed to allocate %d DRC config texts\n",
+ pdata->num_drc_cfgs);
+ return;
+ }
+
+ for (i = 0; i < pdata->num_drc_cfgs; i++)
+ wm8904->drc_texts[i] = pdata->drc_cfgs[i].name;
+
+ wm8904->drc_enum.max = pdata->num_drc_cfgs;
+ wm8904->drc_enum.texts = wm8904->drc_texts;
+
+ ret = snd_soc_add_controls(&wm8904->codec, &control, 1);
+ if (ret != 0)
+ dev_err(wm8904->codec.dev,
+ "Failed to add DRC mode control: %d\n", ret);
+
+ wm8904_set_drc(codec);
+ }
+
+ dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
+ pdata->num_retune_mobile_cfgs);
+
+ if (pdata->num_retune_mobile_cfgs)
+ wm8904_handle_retune_mobile_pdata(wm8904);
+ else
+ snd_soc_add_controls(&wm8904->codec, wm8904_eq_controls,
+ ARRAY_SIZE(wm8904_eq_controls));
+}
+
+static int wm8904_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8904_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8904_codec;
+ codec = wm8904_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ wm8904_handle_pdata(codec->private_data);
+
+ wm8904_add_widgets(codec);
+
+ return ret;
+
+pcm_err:
+ return ret;
+}
+
+static int wm8904_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8904 = {
+ .probe = wm8904_probe,
+ .remove = wm8904_remove,
+ .suspend = wm8904_suspend,
+ .resume = wm8904_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8904);
+
+static int wm8904_register(struct wm8904_priv *wm8904,
+ enum snd_soc_control_type control)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8904->codec;
+ int i;
+
+ if (wm8904_codec) {
+ dev_err(codec->dev, "Another WM8904 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8904;
+ codec->name = "WM8904";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8904_set_bias_level;
+ codec->dai = &wm8904_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8904_MAX_REGISTER;
+ codec->reg_cache = &wm8904->reg_cache;
+ codec->volatile_register = wm8904_volatile_register;
+ codec->cache_sync = 1;
+ codec->idle_bias_off = 1;
+
+ switch (wm8904->devtype) {
+ case WM8904:
+ break;
+ case WM8912:
+ memset(&wm8904_dai.capture, 0, sizeof(wm8904_dai.capture));
+ break;
+ default:
+ dev_err(codec->dev, "Unknown device type %d\n",
+ wm8904->devtype);
+ return -EINVAL;
+ }
+
+ memcpy(codec->reg_cache, wm8904_reg, sizeof(wm8904_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
+ wm8904->supplies[i].supply = wm8904_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
+ wm8904->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = snd_soc_read(codec, WM8904_SW_RESET_AND_ID);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read ID register\n");
+ goto err_enable;
+ }
+ if (ret != wm8904_reg[WM8904_SW_RESET_AND_ID]) {
+ dev_err(codec->dev, "Device is not a WM8904, ID is %x\n", ret);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = snd_soc_read(codec, WM8904_REVISION);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read device revision: %d\n",
+ ret);
+ goto err_enable;
+ }
+ dev_info(codec->dev, "revision %c\n", ret + 'A');
+
+ ret = wm8904_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_enable;
+ }
+
+ wm8904_dai.dev = codec->dev;
+
+ /* Change some default settings - latch VU and enable ZC */
+ wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
+ wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
+ wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
+ wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
+ wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
+ WM8904_HPOUTLZC;
+ wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
+ WM8904_HPOUTRZC;
+ wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
+ WM8904_LINEOUTLZC;
+ wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
+ WM8904_LINEOUTRZC;
+ wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
+
+ /* Set Class W by default - this will be managed by the Class
+ * G widget at runtime where bypass paths are available.
+ */
+ wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
+
+ /* Use normal bias source */
+ wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
+
+ wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Bias level configuration will have done an extra enable */
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+
+ wm8904_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8904_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+err:
+ kfree(wm8904);
+ return ret;
+}
+
+static void wm8904_unregister(struct wm8904_priv *wm8904)
+{
+ wm8904_set_bias_level(&wm8904->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+ snd_soc_unregister_dai(&wm8904_dai);
+ snd_soc_unregister_codec(&wm8904->codec);
+ kfree(wm8904);
+ wm8904_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8904_priv *wm8904;
+ struct snd_soc_codec *codec;
+
+ wm8904 = kzalloc(sizeof(struct wm8904_priv), GFP_KERNEL);
+ if (wm8904 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8904->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ wm8904->devtype = id->driver_data;
+
+ i2c_set_clientdata(i2c, wm8904);
+ codec->control_data = i2c;
+ wm8904->pdata = i2c->dev.platform_data;
+
+ codec->dev = &i2c->dev;
+
+ return wm8904_register(wm8904, SND_SOC_I2C);
+}
+
+static __devexit int wm8904_i2c_remove(struct i2c_client *client)
+{
+ struct wm8904_priv *wm8904 = i2c_get_clientdata(client);
+ wm8904_unregister(wm8904);
+ return 0;
+}
+
+static const struct i2c_device_id wm8904_i2c_id[] = {
+ { "wm8904", WM8904 },
+ { "wm8912", WM8912 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
+
+static struct i2c_driver wm8904_i2c_driver = {
+ .driver = {
+ .name = "WM8904",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8904_i2c_probe,
+ .remove = __devexit_p(wm8904_i2c_remove),
+ .id_table = wm8904_i2c_id,
+};
+#endif
+
+static int __init wm8904_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8904_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8904 I2C driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8904_modinit);
+
+static void __exit wm8904_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8904_i2c_driver);
+#endif
+}
+module_exit(wm8904_exit);
+
+MODULE_DESCRIPTION("ASoC WM8904 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8904.h b/sound/soc/codecs/wm8904.h
new file mode 100644
index 0000000..b68886d
--- /dev/null
+++ b/sound/soc/codecs/wm8904.h
@@ -0,0 +1,1681 @@
+/*
+ * wm8904.h -- WM8904 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics, plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8904_H
+#define _WM8904_H
+
+#define WM8904_CLK_MCLK 1
+#define WM8904_CLK_FLL 2
+
+#define WM8904_FLL_MCLK 1
+#define WM8904_FLL_BCLK 2
+#define WM8904_FLL_LRCLK 3
+#define WM8904_FLL_FREE_RUNNING 4
+
+extern struct snd_soc_dai wm8904_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8904;
+
+/*
+ * Register values.
+ */
+#define WM8904_SW_RESET_AND_ID 0x00
+#define WM8904_REVISION 0x01
+#define WM8904_BIAS_CONTROL_0 0x04
+#define WM8904_VMID_CONTROL_0 0x05
+#define WM8904_MIC_BIAS_CONTROL_0 0x06
+#define WM8904_MIC_BIAS_CONTROL_1 0x07
+#define WM8904_ANALOGUE_DAC_0 0x08
+#define WM8904_MIC_FILTER_CONTROL 0x09
+#define WM8904_ANALOGUE_ADC_0 0x0A
+#define WM8904_POWER_MANAGEMENT_0 0x0C
+#define WM8904_POWER_MANAGEMENT_2 0x0E
+#define WM8904_POWER_MANAGEMENT_3 0x0F
+#define WM8904_POWER_MANAGEMENT_6 0x12
+#define WM8904_CLOCK_RATES_0 0x14
+#define WM8904_CLOCK_RATES_1 0x15
+#define WM8904_CLOCK_RATES_2 0x16
+#define WM8904_AUDIO_INTERFACE_0 0x18
+#define WM8904_AUDIO_INTERFACE_1 0x19
+#define WM8904_AUDIO_INTERFACE_2 0x1A
+#define WM8904_AUDIO_INTERFACE_3 0x1B
+#define WM8904_DAC_DIGITAL_VOLUME_LEFT 0x1E
+#define WM8904_DAC_DIGITAL_VOLUME_RIGHT 0x1F
+#define WM8904_DAC_DIGITAL_0 0x20
+#define WM8904_DAC_DIGITAL_1 0x21
+#define WM8904_ADC_DIGITAL_VOLUME_LEFT 0x24
+#define WM8904_ADC_DIGITAL_VOLUME_RIGHT 0x25
+#define WM8904_ADC_DIGITAL_0 0x26
+#define WM8904_DIGITAL_MICROPHONE_0 0x27
+#define WM8904_DRC_0 0x28
+#define WM8904_DRC_1 0x29
+#define WM8904_DRC_2 0x2A
+#define WM8904_DRC_3 0x2B
+#define WM8904_ANALOGUE_LEFT_INPUT_0 0x2C
+#define WM8904_ANALOGUE_RIGHT_INPUT_0 0x2D
+#define WM8904_ANALOGUE_LEFT_INPUT_1 0x2E
+#define WM8904_ANALOGUE_RIGHT_INPUT_1 0x2F
+#define WM8904_ANALOGUE_OUT1_LEFT 0x39
+#define WM8904_ANALOGUE_OUT1_RIGHT 0x3A
+#define WM8904_ANALOGUE_OUT2_LEFT 0x3B
+#define WM8904_ANALOGUE_OUT2_RIGHT 0x3C
+#define WM8904_ANALOGUE_OUT12_ZC 0x3D
+#define WM8904_DC_SERVO_0 0x43
+#define WM8904_DC_SERVO_1 0x44
+#define WM8904_DC_SERVO_2 0x45
+#define WM8904_DC_SERVO_4 0x47
+#define WM8904_DC_SERVO_5 0x48
+#define WM8904_DC_SERVO_6 0x49
+#define WM8904_DC_SERVO_7 0x4A
+#define WM8904_DC_SERVO_8 0x4B
+#define WM8904_DC_SERVO_9 0x4C
+#define WM8904_DC_SERVO_READBACK_0 0x4D
+#define WM8904_ANALOGUE_HP_0 0x5A
+#define WM8904_ANALOGUE_LINEOUT_0 0x5E
+#define WM8904_CHARGE_PUMP_0 0x62
+#define WM8904_CLASS_W_0 0x68
+#define WM8904_WRITE_SEQUENCER_0 0x6C
+#define WM8904_WRITE_SEQUENCER_1 0x6D
+#define WM8904_WRITE_SEQUENCER_2 0x6E
+#define WM8904_WRITE_SEQUENCER_3 0x6F
+#define WM8904_WRITE_SEQUENCER_4 0x70
+#define WM8904_FLL_CONTROL_1 0x74
+#define WM8904_FLL_CONTROL_2 0x75
+#define WM8904_FLL_CONTROL_3 0x76
+#define WM8904_FLL_CONTROL_4 0x77
+#define WM8904_FLL_CONTROL_5 0x78
+#define WM8904_GPIO_CONTROL_1 0x79
+#define WM8904_GPIO_CONTROL_2 0x7A
+#define WM8904_GPIO_CONTROL_3 0x7B
+#define WM8904_GPIO_CONTROL_4 0x7C
+#define WM8904_DIGITAL_PULLS 0x7E
+#define WM8904_INTERRUPT_STATUS 0x7F
+#define WM8904_INTERRUPT_STATUS_MASK 0x80
+#define WM8904_INTERRUPT_POLARITY 0x81
+#define WM8904_INTERRUPT_DEBOUNCE 0x82
+#define WM8904_EQ1 0x86
+#define WM8904_EQ2 0x87
+#define WM8904_EQ3 0x88
+#define WM8904_EQ4 0x89
+#define WM8904_EQ5 0x8A
+#define WM8904_EQ6 0x8B
+#define WM8904_EQ7 0x8C
+#define WM8904_EQ8 0x8D
+#define WM8904_EQ9 0x8E
+#define WM8904_EQ10 0x8F
+#define WM8904_EQ11 0x90
+#define WM8904_EQ12 0x91
+#define WM8904_EQ13 0x92
+#define WM8904_EQ14 0x93
+#define WM8904_EQ15 0x94
+#define WM8904_EQ16 0x95
+#define WM8904_EQ17 0x96
+#define WM8904_EQ18 0x97
+#define WM8904_EQ19 0x98
+#define WM8904_EQ20 0x99
+#define WM8904_EQ21 0x9A
+#define WM8904_EQ22 0x9B
+#define WM8904_EQ23 0x9C
+#define WM8904_EQ24 0x9D
+#define WM8904_CONTROL_INTERFACE_TEST_1 0xA1
+#define WM8904_ANALOGUE_OUTPUT_BIAS_0 0xCC
+#define WM8904_FLL_NCO_TEST_0 0xF7
+#define WM8904_FLL_NCO_TEST_1 0xF8
+
+#define WM8904_REGISTER_COUNT 101
+#define WM8904_MAX_REGISTER 0xF8
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - SW Reset and ID
+ */
+#define WM8904_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8904_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8904_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R1 (0x01) - Revision
+ */
+#define WM8904_REVISION_MASK 0x000F /* REVISION - [3:0] */
+#define WM8904_REVISION_SHIFT 0 /* REVISION - [3:0] */
+#define WM8904_REVISION_WIDTH 16 /* REVISION - [3:0] */
+
+/*
+ * R4 (0x04) - Bias Control 0
+ */
+#define WM8904_POBCTRL 0x0010 /* POBCTRL */
+#define WM8904_POBCTRL_MASK 0x0010 /* POBCTRL */
+#define WM8904_POBCTRL_SHIFT 4 /* POBCTRL */
+#define WM8904_POBCTRL_WIDTH 1 /* POBCTRL */
+#define WM8904_ISEL_MASK 0x000C /* ISEL - [3:2] */
+#define WM8904_ISEL_SHIFT 2 /* ISEL - [3:2] */
+#define WM8904_ISEL_WIDTH 2 /* ISEL - [3:2] */
+#define WM8904_STARTUP_BIAS_ENA 0x0002 /* STARTUP_BIAS_ENA */
+#define WM8904_STARTUP_BIAS_ENA_MASK 0x0002 /* STARTUP_BIAS_ENA */
+#define WM8904_STARTUP_BIAS_ENA_SHIFT 1 /* STARTUP_BIAS_ENA */
+#define WM8904_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */
+#define WM8904_BIAS_ENA 0x0001 /* BIAS_ENA */
+#define WM8904_BIAS_ENA_MASK 0x0001 /* BIAS_ENA */
+#define WM8904_BIAS_ENA_SHIFT 0 /* BIAS_ENA */
+#define WM8904_BIAS_ENA_WIDTH 1 /* BIAS_ENA */
+
+/*
+ * R5 (0x05) - VMID Control 0
+ */
+#define WM8904_VMID_BUF_ENA 0x0040 /* VMID_BUF_ENA */
+#define WM8904_VMID_BUF_ENA_MASK 0x0040 /* VMID_BUF_ENA */
+#define WM8904_VMID_BUF_ENA_SHIFT 6 /* VMID_BUF_ENA */
+#define WM8904_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */
+#define WM8904_VMID_RES_MASK 0x0006 /* VMID_RES - [2:1] */
+#define WM8904_VMID_RES_SHIFT 1 /* VMID_RES - [2:1] */
+#define WM8904_VMID_RES_WIDTH 2 /* VMID_RES - [2:1] */
+#define WM8904_VMID_ENA 0x0001 /* VMID_ENA */
+#define WM8904_VMID_ENA_MASK 0x0001 /* VMID_ENA */
+#define WM8904_VMID_ENA_SHIFT 0 /* VMID_ENA */
+#define WM8904_VMID_ENA_WIDTH 1 /* VMID_ENA */
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8904_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
+#define WM8904_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
+#define WM8904_MICDET_ENA 0x0002 /* MICDET_ENA */
+#define WM8904_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */
+#define WM8904_MICDET_ENA_SHIFT 1 /* MICDET_ENA */
+#define WM8904_MICDET_ENA_WIDTH 1 /* MICDET_ENA */
+#define WM8904_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */
+
+/*
+ * R7 (0x07) - Mic Bias Control 1
+ */
+#define WM8904_MIC_DET_FILTER_ENA 0x8000 /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_MASK 0x8000 /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_SHIFT 15 /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_WIDTH 1 /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA 0x4000 /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_MASK 0x4000 /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_SHIFT 14 /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_WIDTH 1 /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MICBIAS_SEL_MASK 0x0007 /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_SHIFT 0 /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_WIDTH 3 /* MICBIAS_SEL - [2:0] */
+
+/*
+ * R8 (0x08) - Analogue DAC 0
+ */
+#define WM8904_DAC_BIAS_SEL_MASK 0x0018 /* DAC_BIAS_SEL - [4:3] */
+#define WM8904_DAC_BIAS_SEL_SHIFT 3 /* DAC_BIAS_SEL - [4:3] */
+#define WM8904_DAC_BIAS_SEL_WIDTH 2 /* DAC_BIAS_SEL - [4:3] */
+#define WM8904_DAC_VMID_BIAS_SEL_MASK 0x0006 /* DAC_VMID_BIAS_SEL - [2:1] */
+#define WM8904_DAC_VMID_BIAS_SEL_SHIFT 1 /* DAC_VMID_BIAS_SEL - [2:1] */
+#define WM8904_DAC_VMID_BIAS_SEL_WIDTH 2 /* DAC_VMID_BIAS_SEL - [2:1] */
+
+/*
+ * R9 (0x09) - mic Filter Control
+ */
+#define WM8904_MIC_DET_SET_THRESHOLD_MASK 0xF000 /* MIC_DET_SET_THRESHOLD - [15:12] */
+#define WM8904_MIC_DET_SET_THRESHOLD_SHIFT 12 /* MIC_DET_SET_THRESHOLD - [15:12] */
+#define WM8904_MIC_DET_SET_THRESHOLD_WIDTH 4 /* MIC_DET_SET_THRESHOLD - [15:12] */
+#define WM8904_MIC_DET_RESET_THRESHOLD_MASK 0x0F00 /* MIC_DET_RESET_THRESHOLD - [11:8] */
+#define WM8904_MIC_DET_RESET_THRESHOLD_SHIFT 8 /* MIC_DET_RESET_THRESHOLD - [11:8] */
+#define WM8904_MIC_DET_RESET_THRESHOLD_WIDTH 4 /* MIC_DET_RESET_THRESHOLD - [11:8] */
+#define WM8904_MIC_SHORT_SET_THRESHOLD_MASK 0x00F0 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
+#define WM8904_MIC_SHORT_SET_THRESHOLD_SHIFT 4 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
+#define WM8904_MIC_SHORT_SET_THRESHOLD_WIDTH 4 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
+#define WM8904_MIC_SHORT_RESET_THRESHOLD_MASK 0x000F /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
+#define WM8904_MIC_SHORT_RESET_THRESHOLD_SHIFT 0 /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
+#define WM8904_MIC_SHORT_RESET_THRESHOLD_WIDTH 4 /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
+
+/*
+ * R10 (0x0A) - Analogue ADC 0
+ */
+#define WM8904_ADC_OSR128 0x0001 /* ADC_OSR128 */
+#define WM8904_ADC_OSR128_MASK 0x0001 /* ADC_OSR128 */
+#define WM8904_ADC_OSR128_SHIFT 0 /* ADC_OSR128 */
+#define WM8904_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */
+
+/*
+ * R12 (0x0C) - Power Management 0
+ */
+#define WM8904_INL_ENA 0x0002 /* INL_ENA */
+#define WM8904_INL_ENA_MASK 0x0002 /* INL_ENA */
+#define WM8904_INL_ENA_SHIFT 1 /* INL_ENA */
+#define WM8904_INL_ENA_WIDTH 1 /* INL_ENA */
+#define WM8904_INR_ENA 0x0001 /* INR_ENA */
+#define WM8904_INR_ENA_MASK 0x0001 /* INR_ENA */
+#define WM8904_INR_ENA_SHIFT 0 /* INR_ENA */
+#define WM8904_INR_ENA_WIDTH 1 /* INR_ENA */
+
+/*
+ * R14 (0x0E) - Power Management 2
+ */
+#define WM8904_HPL_PGA_ENA 0x0002 /* HPL_PGA_ENA */
+#define WM8904_HPL_PGA_ENA_MASK 0x0002 /* HPL_PGA_ENA */
+#define WM8904_HPL_PGA_ENA_SHIFT 1 /* HPL_PGA_ENA */
+#define WM8904_HPL_PGA_ENA_WIDTH 1 /* HPL_PGA_ENA */
+#define WM8904_HPR_PGA_ENA 0x0001 /* HPR_PGA_ENA */
+#define WM8904_HPR_PGA_ENA_MASK 0x0001 /* HPR_PGA_ENA */
+#define WM8904_HPR_PGA_ENA_SHIFT 0 /* HPR_PGA_ENA */
+#define WM8904_HPR_PGA_ENA_WIDTH 1 /* HPR_PGA_ENA */
+
+/*
+ * R15 (0x0F) - Power Management 3
+ */
+#define WM8904_LINEOUTL_PGA_ENA 0x0002 /* LINEOUTL_PGA_ENA */
+#define WM8904_LINEOUTL_PGA_ENA_MASK 0x0002 /* LINEOUTL_PGA_ENA */
+#define WM8904_LINEOUTL_PGA_ENA_SHIFT 1 /* LINEOUTL_PGA_ENA */
+#define WM8904_LINEOUTL_PGA_ENA_WIDTH 1 /* LINEOUTL_PGA_ENA */
+#define WM8904_LINEOUTR_PGA_ENA 0x0001 /* LINEOUTR_PGA_ENA */
+#define WM8904_LINEOUTR_PGA_ENA_MASK 0x0001 /* LINEOUTR_PGA_ENA */
+#define WM8904_LINEOUTR_PGA_ENA_SHIFT 0 /* LINEOUTR_PGA_ENA */
+#define WM8904_LINEOUTR_PGA_ENA_WIDTH 1 /* LINEOUTR_PGA_ENA */
+
+/*
+ * R18 (0x12) - Power Management 6
+ */
+#define WM8904_DACL_ENA 0x0008 /* DACL_ENA */
+#define WM8904_DACL_ENA_MASK 0x0008 /* DACL_ENA */
+#define WM8904_DACL_ENA_SHIFT 3 /* DACL_ENA */
+#define WM8904_DACL_ENA_WIDTH 1 /* DACL_ENA */
+#define WM8904_DACR_ENA 0x0004 /* DACR_ENA */
+#define WM8904_DACR_ENA_MASK 0x0004 /* DACR_ENA */
+#define WM8904_DACR_ENA_SHIFT 2 /* DACR_ENA */
+#define WM8904_DACR_ENA_WIDTH 1 /* DACR_ENA */
+#define WM8904_ADCL_ENA 0x0002 /* ADCL_ENA */
+#define WM8904_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */
+#define WM8904_ADCL_ENA_SHIFT 1 /* ADCL_ENA */
+#define WM8904_ADCL_ENA_WIDTH 1 /* ADCL_ENA */
+#define WM8904_ADCR_ENA 0x0001 /* ADCR_ENA */
+#define WM8904_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */
+#define WM8904_ADCR_ENA_SHIFT 0 /* ADCR_ENA */
+#define WM8904_ADCR_ENA_WIDTH 1 /* ADCR_ENA */
+
+/*
+ * R20 (0x14) - Clock Rates 0
+ */
+#define WM8904_TOCLK_RATE_DIV16 0x4000 /* TOCLK_RATE_DIV16 */
+#define WM8904_TOCLK_RATE_DIV16_MASK 0x4000 /* TOCLK_RATE_DIV16 */
+#define WM8904_TOCLK_RATE_DIV16_SHIFT 14 /* TOCLK_RATE_DIV16 */
+#define WM8904_TOCLK_RATE_DIV16_WIDTH 1 /* TOCLK_RATE_DIV16 */
+#define WM8904_TOCLK_RATE_X4 0x2000 /* TOCLK_RATE_X4 */
+#define WM8904_TOCLK_RATE_X4_MASK 0x2000 /* TOCLK_RATE_X4 */
+#define WM8904_TOCLK_RATE_X4_SHIFT 13 /* TOCLK_RATE_X4 */
+#define WM8904_TOCLK_RATE_X4_WIDTH 1 /* TOCLK_RATE_X4 */
+#define WM8904_SR_MODE 0x1000 /* SR_MODE */
+#define WM8904_SR_MODE_MASK 0x1000 /* SR_MODE */
+#define WM8904_SR_MODE_SHIFT 12 /* SR_MODE */
+#define WM8904_SR_MODE_WIDTH 1 /* SR_MODE */
+#define WM8904_MCLK_DIV 0x0001 /* MCLK_DIV */
+#define WM8904_MCLK_DIV_MASK 0x0001 /* MCLK_DIV */
+#define WM8904_MCLK_DIV_SHIFT 0 /* MCLK_DIV */
+#define WM8904_MCLK_DIV_WIDTH 1 /* MCLK_DIV */
+
+/*
+ * R21 (0x15) - Clock Rates 1
+ */
+#define WM8904_CLK_SYS_RATE_MASK 0x3C00 /* CLK_SYS_RATE - [13:10] */
+#define WM8904_CLK_SYS_RATE_SHIFT 10 /* CLK_SYS_RATE - [13:10] */
+#define WM8904_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [13:10] */
+#define WM8904_SAMPLE_RATE_MASK 0x0007 /* SAMPLE_RATE - [2:0] */
+#define WM8904_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [2:0] */
+#define WM8904_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [2:0] */
+
+/*
+ * R22 (0x16) - Clock Rates 2
+ */
+#define WM8904_MCLK_INV 0x8000 /* MCLK_INV */
+#define WM8904_MCLK_INV_MASK 0x8000 /* MCLK_INV */
+#define WM8904_MCLK_INV_SHIFT 15 /* MCLK_INV */
+#define WM8904_MCLK_INV_WIDTH 1 /* MCLK_INV */
+#define WM8904_SYSCLK_SRC 0x4000 /* SYSCLK_SRC */
+#define WM8904_SYSCLK_SRC_MASK 0x4000 /* SYSCLK_SRC */
+#define WM8904_SYSCLK_SRC_SHIFT 14 /* SYSCLK_SRC */
+#define WM8904_SYSCLK_SRC_WIDTH 1 /* SYSCLK_SRC */
+#define WM8904_TOCLK_RATE 0x1000 /* TOCLK_RATE */
+#define WM8904_TOCLK_RATE_MASK 0x1000 /* TOCLK_RATE */
+#define WM8904_TOCLK_RATE_SHIFT 12 /* TOCLK_RATE */
+#define WM8904_TOCLK_RATE_WIDTH 1 /* TOCLK_RATE */
+#define WM8904_OPCLK_ENA 0x0008 /* OPCLK_ENA */
+#define WM8904_OPCLK_ENA_MASK 0x0008 /* OPCLK_ENA */
+#define WM8904_OPCLK_ENA_SHIFT 3 /* OPCLK_ENA */
+#define WM8904_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */
+#define WM8904_CLK_SYS_ENA 0x0004 /* CLK_SYS_ENA */
+#define WM8904_CLK_SYS_ENA_MASK 0x0004 /* CLK_SYS_ENA */
+#define WM8904_CLK_SYS_ENA_SHIFT 2 /* CLK_SYS_ENA */
+#define WM8904_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
+#define WM8904_CLK_DSP_ENA 0x0002 /* CLK_DSP_ENA */
+#define WM8904_CLK_DSP_ENA_MASK 0x0002 /* CLK_DSP_ENA */
+#define WM8904_CLK_DSP_ENA_SHIFT 1 /* CLK_DSP_ENA */
+#define WM8904_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
+#define WM8904_TOCLK_ENA 0x0001 /* TOCLK_ENA */
+#define WM8904_TOCLK_ENA_MASK 0x0001 /* TOCLK_ENA */
+#define WM8904_TOCLK_ENA_SHIFT 0 /* TOCLK_ENA */
+#define WM8904_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */
+
+/*
+ * R24 (0x18) - Audio Interface 0
+ */
+#define WM8904_DACL_DATINV 0x1000 /* DACL_DATINV */
+#define WM8904_DACL_DATINV_MASK 0x1000 /* DACL_DATINV */
+#define WM8904_DACL_DATINV_SHIFT 12 /* DACL_DATINV */
+#define WM8904_DACL_DATINV_WIDTH 1 /* DACL_DATINV */
+#define WM8904_DACR_DATINV 0x0800 /* DACR_DATINV */
+#define WM8904_DACR_DATINV_MASK 0x0800 /* DACR_DATINV */
+#define WM8904_DACR_DATINV_SHIFT 11 /* DACR_DATINV */
+#define WM8904_DACR_DATINV_WIDTH 1 /* DACR_DATINV */
+#define WM8904_DAC_BOOST_MASK 0x0600 /* DAC_BOOST - [10:9] */
+#define WM8904_DAC_BOOST_SHIFT 9 /* DAC_BOOST - [10:9] */
+#define WM8904_DAC_BOOST_WIDTH 2 /* DAC_BOOST - [10:9] */
+#define WM8904_LOOPBACK 0x0100 /* LOOPBACK */
+#define WM8904_LOOPBACK_MASK 0x0100 /* LOOPBACK */
+#define WM8904_LOOPBACK_SHIFT 8 /* LOOPBACK */
+#define WM8904_LOOPBACK_WIDTH 1 /* LOOPBACK */
+#define WM8904_AIFADCL_SRC 0x0080 /* AIFADCL_SRC */
+#define WM8904_AIFADCL_SRC_MASK 0x0080 /* AIFADCL_SRC */
+#define WM8904_AIFADCL_SRC_SHIFT 7 /* AIFADCL_SRC */
+#define WM8904_AIFADCL_SRC_WIDTH 1 /* AIFADCL_SRC */
+#define WM8904_AIFADCR_SRC 0x0040 /* AIFADCR_SRC */
+#define WM8904_AIFADCR_SRC_MASK 0x0040 /* AIFADCR_SRC */
+#define WM8904_AIFADCR_SRC_SHIFT 6 /* AIFADCR_SRC */
+#define WM8904_AIFADCR_SRC_WIDTH 1 /* AIFADCR_SRC */
+#define WM8904_AIFDACL_SRC 0x0020 /* AIFDACL_SRC */
+#define WM8904_AIFDACL_SRC_MASK 0x0020 /* AIFDACL_SRC */
+#define WM8904_AIFDACL_SRC_SHIFT 5 /* AIFDACL_SRC */
+#define WM8904_AIFDACL_SRC_WIDTH 1 /* AIFDACL_SRC */
+#define WM8904_AIFDACR_SRC 0x0010 /* AIFDACR_SRC */
+#define WM8904_AIFDACR_SRC_MASK 0x0010 /* AIFDACR_SRC */
+#define WM8904_AIFDACR_SRC_SHIFT 4 /* AIFDACR_SRC */
+#define WM8904_AIFDACR_SRC_WIDTH 1 /* AIFDACR_SRC */
+#define WM8904_ADC_COMP 0x0008 /* ADC_COMP */
+#define WM8904_ADC_COMP_MASK 0x0008 /* ADC_COMP */
+#define WM8904_ADC_COMP_SHIFT 3 /* ADC_COMP */
+#define WM8904_ADC_COMP_WIDTH 1 /* ADC_COMP */
+#define WM8904_ADC_COMPMODE 0x0004 /* ADC_COMPMODE */
+#define WM8904_ADC_COMPMODE_MASK 0x0004 /* ADC_COMPMODE */
+#define WM8904_ADC_COMPMODE_SHIFT 2 /* ADC_COMPMODE */
+#define WM8904_ADC_COMPMODE_WIDTH 1 /* ADC_COMPMODE */
+#define WM8904_DAC_COMP 0x0002 /* DAC_COMP */
+#define WM8904_DAC_COMP_MASK 0x0002 /* DAC_COMP */
+#define WM8904_DAC_COMP_SHIFT 1 /* DAC_COMP */
+#define WM8904_DAC_COMP_WIDTH 1 /* DAC_COMP */
+#define WM8904_DAC_COMPMODE 0x0001 /* DAC_COMPMODE */
+#define WM8904_DAC_COMPMODE_MASK 0x0001 /* DAC_COMPMODE */
+#define WM8904_DAC_COMPMODE_SHIFT 0 /* DAC_COMPMODE */
+#define WM8904_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */
+
+/*
+ * R25 (0x19) - Audio Interface 1
+ */
+#define WM8904_AIFDAC_TDM 0x2000 /* AIFDAC_TDM */
+#define WM8904_AIFDAC_TDM_MASK 0x2000 /* AIFDAC_TDM */
+#define WM8904_AIFDAC_TDM_SHIFT 13 /* AIFDAC_TDM */
+#define WM8904_AIFDAC_TDM_WIDTH 1 /* AIFDAC_TDM */
+#define WM8904_AIFDAC_TDM_CHAN 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8904_AIFDAC_TDM_CHAN_MASK 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8904_AIFDAC_TDM_CHAN_SHIFT 12 /* AIFDAC_TDM_CHAN */
+#define WM8904_AIFDAC_TDM_CHAN_WIDTH 1 /* AIFDAC_TDM_CHAN */
+#define WM8904_AIFADC_TDM 0x0800 /* AIFADC_TDM */
+#define WM8904_AIFADC_TDM_MASK 0x0800 /* AIFADC_TDM */
+#define WM8904_AIFADC_TDM_SHIFT 11 /* AIFADC_TDM */
+#define WM8904_AIFADC_TDM_WIDTH 1 /* AIFADC_TDM */
+#define WM8904_AIFADC_TDM_CHAN 0x0400 /* AIFADC_TDM_CHAN */
+#define WM8904_AIFADC_TDM_CHAN_MASK 0x0400 /* AIFADC_TDM_CHAN */
+#define WM8904_AIFADC_TDM_CHAN_SHIFT 10 /* AIFADC_TDM_CHAN */
+#define WM8904_AIFADC_TDM_CHAN_WIDTH 1 /* AIFADC_TDM_CHAN */
+#define WM8904_AIF_TRIS 0x0100 /* AIF_TRIS */
+#define WM8904_AIF_TRIS_MASK 0x0100 /* AIF_TRIS */
+#define WM8904_AIF_TRIS_SHIFT 8 /* AIF_TRIS */
+#define WM8904_AIF_TRIS_WIDTH 1 /* AIF_TRIS */
+#define WM8904_AIF_BCLK_INV 0x0080 /* AIF_BCLK_INV */
+#define WM8904_AIF_BCLK_INV_MASK 0x0080 /* AIF_BCLK_INV */
+#define WM8904_AIF_BCLK_INV_SHIFT 7 /* AIF_BCLK_INV */
+#define WM8904_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */
+#define WM8904_BCLK_DIR 0x0040 /* BCLK_DIR */
+#define WM8904_BCLK_DIR_MASK 0x0040 /* BCLK_DIR */
+#define WM8904_BCLK_DIR_SHIFT 6 /* BCLK_DIR */
+#define WM8904_BCLK_DIR_WIDTH 1 /* BCLK_DIR */
+#define WM8904_AIF_LRCLK_INV 0x0010 /* AIF_LRCLK_INV */
+#define WM8904_AIF_LRCLK_INV_MASK 0x0010 /* AIF_LRCLK_INV */
+#define WM8904_AIF_LRCLK_INV_SHIFT 4 /* AIF_LRCLK_INV */
+#define WM8904_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */
+#define WM8904_AIF_WL_MASK 0x000C /* AIF_WL - [3:2] */
+#define WM8904_AIF_WL_SHIFT 2 /* AIF_WL - [3:2] */
+#define WM8904_AIF_WL_WIDTH 2 /* AIF_WL - [3:2] */
+#define WM8904_AIF_FMT_MASK 0x0003 /* AIF_FMT - [1:0] */
+#define WM8904_AIF_FMT_SHIFT 0 /* AIF_FMT - [1:0] */
+#define WM8904_AIF_FMT_WIDTH 2 /* AIF_FMT - [1:0] */
+
+/*
+ * R26 (0x1A) - Audio Interface 2
+ */
+#define WM8904_OPCLK_DIV_MASK 0x0F00 /* OPCLK_DIV - [11:8] */
+#define WM8904_OPCLK_DIV_SHIFT 8 /* OPCLK_DIV - [11:8] */
+#define WM8904_OPCLK_DIV_WIDTH 4 /* OPCLK_DIV - [11:8] */
+#define WM8904_BCLK_DIV_MASK 0x001F /* BCLK_DIV - [4:0] */
+#define WM8904_BCLK_DIV_SHIFT 0 /* BCLK_DIV - [4:0] */
+#define WM8904_BCLK_DIV_WIDTH 5 /* BCLK_DIV - [4:0] */
+
+/*
+ * R27 (0x1B) - Audio Interface 3
+ */
+#define WM8904_LRCLK_DIR 0x0800 /* LRCLK_DIR */
+#define WM8904_LRCLK_DIR_MASK 0x0800 /* LRCLK_DIR */
+#define WM8904_LRCLK_DIR_SHIFT 11 /* LRCLK_DIR */
+#define WM8904_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */
+#define WM8904_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */
+#define WM8904_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */
+#define WM8904_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */
+
+/*
+ * R30 (0x1E) - DAC Digital Volume Left
+ */
+#define WM8904_DAC_VU 0x0100 /* DAC_VU */
+#define WM8904_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8904_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8904_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8904_DACL_VOL_MASK 0x00FF /* DACL_VOL - [7:0] */
+#define WM8904_DACL_VOL_SHIFT 0 /* DACL_VOL - [7:0] */
+#define WM8904_DACL_VOL_WIDTH 8 /* DACL_VOL - [7:0] */
+
+/*
+ * R31 (0x1F) - DAC Digital Volume Right
+ */
+#define WM8904_DAC_VU 0x0100 /* DAC_VU */
+#define WM8904_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8904_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8904_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8904_DACR_VOL_MASK 0x00FF /* DACR_VOL - [7:0] */
+#define WM8904_DACR_VOL_SHIFT 0 /* DACR_VOL - [7:0] */
+#define WM8904_DACR_VOL_WIDTH 8 /* DACR_VOL - [7:0] */
+
+/*
+ * R32 (0x20) - DAC Digital 0
+ */
+#define WM8904_ADCL_DAC_SVOL_MASK 0x0F00 /* ADCL_DAC_SVOL - [11:8] */
+#define WM8904_ADCL_DAC_SVOL_SHIFT 8 /* ADCL_DAC_SVOL - [11:8] */
+#define WM8904_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [11:8] */
+#define WM8904_ADCR_DAC_SVOL_MASK 0x00F0 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8904_ADCR_DAC_SVOL_SHIFT 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8904_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8904_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
+#define WM8904_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
+#define WM8904_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
+#define WM8904_ADC_TO_DACR_MASK 0x0003 /* ADC_TO_DACR - [1:0] */
+#define WM8904_ADC_TO_DACR_SHIFT 0 /* ADC_TO_DACR - [1:0] */
+#define WM8904_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [1:0] */
+
+/*
+ * R33 (0x21) - DAC Digital 1
+ */
+#define WM8904_DAC_MONO 0x1000 /* DAC_MONO */
+#define WM8904_DAC_MONO_MASK 0x1000 /* DAC_MONO */
+#define WM8904_DAC_MONO_SHIFT 12 /* DAC_MONO */
+#define WM8904_DAC_MONO_WIDTH 1 /* DAC_MONO */
+#define WM8904_DAC_SB_FILT 0x0800 /* DAC_SB_FILT */
+#define WM8904_DAC_SB_FILT_MASK 0x0800 /* DAC_SB_FILT */
+#define WM8904_DAC_SB_FILT_SHIFT 11 /* DAC_SB_FILT */
+#define WM8904_DAC_SB_FILT_WIDTH 1 /* DAC_SB_FILT */
+#define WM8904_DAC_MUTERATE 0x0400 /* DAC_MUTERATE */
+#define WM8904_DAC_MUTERATE_MASK 0x0400 /* DAC_MUTERATE */
+#define WM8904_DAC_MUTERATE_SHIFT 10 /* DAC_MUTERATE */
+#define WM8904_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */
+#define WM8904_DAC_UNMUTE_RAMP 0x0200 /* DAC_UNMUTE_RAMP */
+#define WM8904_DAC_UNMUTE_RAMP_MASK 0x0200 /* DAC_UNMUTE_RAMP */
+#define WM8904_DAC_UNMUTE_RAMP_SHIFT 9 /* DAC_UNMUTE_RAMP */
+#define WM8904_DAC_UNMUTE_RAMP_WIDTH 1 /* DAC_UNMUTE_RAMP */
+#define WM8904_DAC_OSR128 0x0040 /* DAC_OSR128 */
+#define WM8904_DAC_OSR128_MASK 0x0040 /* DAC_OSR128 */
+#define WM8904_DAC_OSR128_SHIFT 6 /* DAC_OSR128 */
+#define WM8904_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
+#define WM8904_DAC_MUTE 0x0008 /* DAC_MUTE */
+#define WM8904_DAC_MUTE_MASK 0x0008 /* DAC_MUTE */
+#define WM8904_DAC_MUTE_SHIFT 3 /* DAC_MUTE */
+#define WM8904_DAC_MUTE_WIDTH 1 /* DAC_MUTE */
+#define WM8904_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */
+#define WM8904_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */
+#define WM8904_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */
+
+/*
+ * R36 (0x24) - ADC Digital Volume Left
+ */
+#define WM8904_ADC_VU 0x0100 /* ADC_VU */
+#define WM8904_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8904_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8904_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8904_ADCL_VOL_MASK 0x00FF /* ADCL_VOL - [7:0] */
+#define WM8904_ADCL_VOL_SHIFT 0 /* ADCL_VOL - [7:0] */
+#define WM8904_ADCL_VOL_WIDTH 8 /* ADCL_VOL - [7:0] */
+
+/*
+ * R37 (0x25) - ADC Digital Volume Right
+ */
+#define WM8904_ADC_VU 0x0100 /* ADC_VU */
+#define WM8904_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8904_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8904_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8904_ADCR_VOL_MASK 0x00FF /* ADCR_VOL - [7:0] */
+#define WM8904_ADCR_VOL_SHIFT 0 /* ADCR_VOL - [7:0] */
+#define WM8904_ADCR_VOL_WIDTH 8 /* ADCR_VOL - [7:0] */
+
+/*
+ * R38 (0x26) - ADC Digital 0
+ */
+#define WM8904_ADC_HPF_CUT_MASK 0x0060 /* ADC_HPF_CUT - [6:5] */
+#define WM8904_ADC_HPF_CUT_SHIFT 5 /* ADC_HPF_CUT - [6:5] */
+#define WM8904_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [6:5] */
+#define WM8904_ADC_HPF 0x0010 /* ADC_HPF */
+#define WM8904_ADC_HPF_MASK 0x0010 /* ADC_HPF */
+#define WM8904_ADC_HPF_SHIFT 4 /* ADC_HPF */
+#define WM8904_ADC_HPF_WIDTH 1 /* ADC_HPF */
+#define WM8904_ADCL_DATINV 0x0002 /* ADCL_DATINV */
+#define WM8904_ADCL_DATINV_MASK 0x0002 /* ADCL_DATINV */
+#define WM8904_ADCL_DATINV_SHIFT 1 /* ADCL_DATINV */
+#define WM8904_ADCL_DATINV_WIDTH 1 /* ADCL_DATINV */
+#define WM8904_ADCR_DATINV 0x0001 /* ADCR_DATINV */
+#define WM8904_ADCR_DATINV_MASK 0x0001 /* ADCR_DATINV */
+#define WM8904_ADCR_DATINV_SHIFT 0 /* ADCR_DATINV */
+#define WM8904_ADCR_DATINV_WIDTH 1 /* ADCR_DATINV */
+
+/*
+ * R39 (0x27) - Digital Microphone 0
+ */
+#define WM8904_DMIC_ENA 0x1000 /* DMIC_ENA */
+#define WM8904_DMIC_ENA_MASK 0x1000 /* DMIC_ENA */
+#define WM8904_DMIC_ENA_SHIFT 12 /* DMIC_ENA */
+#define WM8904_DMIC_ENA_WIDTH 1 /* DMIC_ENA */
+#define WM8904_DMIC_SRC 0x0800 /* DMIC_SRC */
+#define WM8904_DMIC_SRC_MASK 0x0800 /* DMIC_SRC */
+#define WM8904_DMIC_SRC_SHIFT 11 /* DMIC_SRC */
+#define WM8904_DMIC_SRC_WIDTH 1 /* DMIC_SRC */
+
+/*
+ * R40 (0x28) - DRC 0
+ */
+#define WM8904_DRC_ENA 0x8000 /* DRC_ENA */
+#define WM8904_DRC_ENA_MASK 0x8000 /* DRC_ENA */
+#define WM8904_DRC_ENA_SHIFT 15 /* DRC_ENA */
+#define WM8904_DRC_ENA_WIDTH 1 /* DRC_ENA */
+#define WM8904_DRC_DAC_PATH 0x4000 /* DRC_DAC_PATH */
+#define WM8904_DRC_DAC_PATH_MASK 0x4000 /* DRC_DAC_PATH */
+#define WM8904_DRC_DAC_PATH_SHIFT 14 /* DRC_DAC_PATH */
+#define WM8904_DRC_DAC_PATH_WIDTH 1 /* DRC_DAC_PATH */
+#define WM8904_DRC_GS_HYST_LVL_MASK 0x1800 /* DRC_GS_HYST_LVL - [12:11] */
+#define WM8904_DRC_GS_HYST_LVL_SHIFT 11 /* DRC_GS_HYST_LVL - [12:11] */
+#define WM8904_DRC_GS_HYST_LVL_WIDTH 2 /* DRC_GS_HYST_LVL - [12:11] */
+#define WM8904_DRC_STARTUP_GAIN_MASK 0x07C0 /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8904_DRC_STARTUP_GAIN_SHIFT 6 /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8904_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8904_DRC_FF_DELAY 0x0020 /* DRC_FF_DELAY */
+#define WM8904_DRC_FF_DELAY_MASK 0x0020 /* DRC_FF_DELAY */
+#define WM8904_DRC_FF_DELAY_SHIFT 5 /* DRC_FF_DELAY */
+#define WM8904_DRC_FF_DELAY_WIDTH 1 /* DRC_FF_DELAY */
+#define WM8904_DRC_GS_ENA 0x0008 /* DRC_GS_ENA */
+#define WM8904_DRC_GS_ENA_MASK 0x0008 /* DRC_GS_ENA */
+#define WM8904_DRC_GS_ENA_SHIFT 3 /* DRC_GS_ENA */
+#define WM8904_DRC_GS_ENA_WIDTH 1 /* DRC_GS_ENA */
+#define WM8904_DRC_QR 0x0004 /* DRC_QR */
+#define WM8904_DRC_QR_MASK 0x0004 /* DRC_QR */
+#define WM8904_DRC_QR_SHIFT 2 /* DRC_QR */
+#define WM8904_DRC_QR_WIDTH 1 /* DRC_QR */
+#define WM8904_DRC_ANTICLIP 0x0002 /* DRC_ANTICLIP */
+#define WM8904_DRC_ANTICLIP_MASK 0x0002 /* DRC_ANTICLIP */
+#define WM8904_DRC_ANTICLIP_SHIFT 1 /* DRC_ANTICLIP */
+#define WM8904_DRC_ANTICLIP_WIDTH 1 /* DRC_ANTICLIP */
+#define WM8904_DRC_GS_HYST 0x0001 /* DRC_GS_HYST */
+#define WM8904_DRC_GS_HYST_MASK 0x0001 /* DRC_GS_HYST */
+#define WM8904_DRC_GS_HYST_SHIFT 0 /* DRC_GS_HYST */
+#define WM8904_DRC_GS_HYST_WIDTH 1 /* DRC_GS_HYST */
+
+/*
+ * R41 (0x29) - DRC 1
+ */
+#define WM8904_DRC_ATK_MASK 0xF000 /* DRC_ATK - [15:12] */
+#define WM8904_DRC_ATK_SHIFT 12 /* DRC_ATK - [15:12] */
+#define WM8904_DRC_ATK_WIDTH 4 /* DRC_ATK - [15:12] */
+#define WM8904_DRC_DCY_MASK 0x0F00 /* DRC_DCY - [11:8] */
+#define WM8904_DRC_DCY_SHIFT 8 /* DRC_DCY - [11:8] */
+#define WM8904_DRC_DCY_WIDTH 4 /* DRC_DCY - [11:8] */
+#define WM8904_DRC_QR_THR_MASK 0x00C0 /* DRC_QR_THR - [7:6] */
+#define WM8904_DRC_QR_THR_SHIFT 6 /* DRC_QR_THR - [7:6] */
+#define WM8904_DRC_QR_THR_WIDTH 2 /* DRC_QR_THR - [7:6] */
+#define WM8904_DRC_QR_DCY_MASK 0x0030 /* DRC_QR_DCY - [5:4] */
+#define WM8904_DRC_QR_DCY_SHIFT 4 /* DRC_QR_DCY - [5:4] */
+#define WM8904_DRC_QR_DCY_WIDTH 2 /* DRC_QR_DCY - [5:4] */
+#define WM8904_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */
+#define WM8904_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */
+#define WM8904_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */
+#define WM8904_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */
+#define WM8904_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */
+#define WM8904_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R42 (0x2A) - DRC 2
+ */
+#define WM8904_DRC_HI_COMP_MASK 0x0038 /* DRC_HI_COMP - [5:3] */
+#define WM8904_DRC_HI_COMP_SHIFT 3 /* DRC_HI_COMP - [5:3] */
+#define WM8904_DRC_HI_COMP_WIDTH 3 /* DRC_HI_COMP - [5:3] */
+#define WM8904_DRC_LO_COMP_MASK 0x0007 /* DRC_LO_COMP - [2:0] */
+#define WM8904_DRC_LO_COMP_SHIFT 0 /* DRC_LO_COMP - [2:0] */
+#define WM8904_DRC_LO_COMP_WIDTH 3 /* DRC_LO_COMP - [2:0] */
+
+/*
+ * R43 (0x2B) - DRC 3
+ */
+#define WM8904_DRC_KNEE_IP_MASK 0x07E0 /* DRC_KNEE_IP - [10:5] */
+#define WM8904_DRC_KNEE_IP_SHIFT 5 /* DRC_KNEE_IP - [10:5] */
+#define WM8904_DRC_KNEE_IP_WIDTH 6 /* DRC_KNEE_IP - [10:5] */
+#define WM8904_DRC_KNEE_OP_MASK 0x001F /* DRC_KNEE_OP - [4:0] */
+#define WM8904_DRC_KNEE_OP_SHIFT 0 /* DRC_KNEE_OP - [4:0] */
+#define WM8904_DRC_KNEE_OP_WIDTH 5 /* DRC_KNEE_OP - [4:0] */
+
+/*
+ * R44 (0x2C) - Analogue Left Input 0
+ */
+#define WM8904_LINMUTE 0x0080 /* LINMUTE */
+#define WM8904_LINMUTE_MASK 0x0080 /* LINMUTE */
+#define WM8904_LINMUTE_SHIFT 7 /* LINMUTE */
+#define WM8904_LINMUTE_WIDTH 1 /* LINMUTE */
+#define WM8904_LIN_VOL_MASK 0x001F /* LIN_VOL - [4:0] */
+#define WM8904_LIN_VOL_SHIFT 0 /* LIN_VOL - [4:0] */
+#define WM8904_LIN_VOL_WIDTH 5 /* LIN_VOL - [4:0] */
+
+/*
+ * R45 (0x2D) - Analogue Right Input 0
+ */
+#define WM8904_RINMUTE 0x0080 /* RINMUTE */
+#define WM8904_RINMUTE_MASK 0x0080 /* RINMUTE */
+#define WM8904_RINMUTE_SHIFT 7 /* RINMUTE */
+#define WM8904_RINMUTE_WIDTH 1 /* RINMUTE */
+#define WM8904_RIN_VOL_MASK 0x001F /* RIN_VOL - [4:0] */
+#define WM8904_RIN_VOL_SHIFT 0 /* RIN_VOL - [4:0] */
+#define WM8904_RIN_VOL_WIDTH 5 /* RIN_VOL - [4:0] */
+
+/*
+ * R46 (0x2E) - Analogue Left Input 1
+ */
+#define WM8904_INL_CM_ENA 0x0040 /* INL_CM_ENA */
+#define WM8904_INL_CM_ENA_MASK 0x0040 /* INL_CM_ENA */
+#define WM8904_INL_CM_ENA_SHIFT 6 /* INL_CM_ENA */
+#define WM8904_INL_CM_ENA_WIDTH 1 /* INL_CM_ENA */
+#define WM8904_L_IP_SEL_N_MASK 0x0030 /* L_IP_SEL_N - [5:4] */
+#define WM8904_L_IP_SEL_N_SHIFT 4 /* L_IP_SEL_N - [5:4] */
+#define WM8904_L_IP_SEL_N_WIDTH 2 /* L_IP_SEL_N - [5:4] */
+#define WM8904_L_IP_SEL_P_MASK 0x000C /* L_IP_SEL_P - [3:2] */
+#define WM8904_L_IP_SEL_P_SHIFT 2 /* L_IP_SEL_P - [3:2] */
+#define WM8904_L_IP_SEL_P_WIDTH 2 /* L_IP_SEL_P - [3:2] */
+#define WM8904_L_MODE_MASK 0x0003 /* L_MODE - [1:0] */
+#define WM8904_L_MODE_SHIFT 0 /* L_MODE - [1:0] */
+#define WM8904_L_MODE_WIDTH 2 /* L_MODE - [1:0] */
+
+/*
+ * R47 (0x2F) - Analogue Right Input 1
+ */
+#define WM8904_INR_CM_ENA 0x0040 /* INR_CM_ENA */
+#define WM8904_INR_CM_ENA_MASK 0x0040 /* INR_CM_ENA */
+#define WM8904_INR_CM_ENA_SHIFT 6 /* INR_CM_ENA */
+#define WM8904_INR_CM_ENA_WIDTH 1 /* INR_CM_ENA */
+#define WM8904_R_IP_SEL_N_MASK 0x0030 /* R_IP_SEL_N - [5:4] */
+#define WM8904_R_IP_SEL_N_SHIFT 4 /* R_IP_SEL_N - [5:4] */
+#define WM8904_R_IP_SEL_N_WIDTH 2 /* R_IP_SEL_N - [5:4] */
+#define WM8904_R_IP_SEL_P_MASK 0x000C /* R_IP_SEL_P - [3:2] */
+#define WM8904_R_IP_SEL_P_SHIFT 2 /* R_IP_SEL_P - [3:2] */
+#define WM8904_R_IP_SEL_P_WIDTH 2 /* R_IP_SEL_P - [3:2] */
+#define WM8904_R_MODE_MASK 0x0003 /* R_MODE - [1:0] */
+#define WM8904_R_MODE_SHIFT 0 /* R_MODE - [1:0] */
+#define WM8904_R_MODE_WIDTH 2 /* R_MODE - [1:0] */
+
+/*
+ * R57 (0x39) - Analogue OUT1 Left
+ */
+#define WM8904_HPOUTL_MUTE 0x0100 /* HPOUTL_MUTE */
+#define WM8904_HPOUTL_MUTE_MASK 0x0100 /* HPOUTL_MUTE */
+#define WM8904_HPOUTL_MUTE_SHIFT 8 /* HPOUTL_MUTE */
+#define WM8904_HPOUTL_MUTE_WIDTH 1 /* HPOUTL_MUTE */
+#define WM8904_HPOUT_VU 0x0080 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_MASK 0x0080 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_SHIFT 7 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_WIDTH 1 /* HPOUT_VU */
+#define WM8904_HPOUTLZC 0x0040 /* HPOUTLZC */
+#define WM8904_HPOUTLZC_MASK 0x0040 /* HPOUTLZC */
+#define WM8904_HPOUTLZC_SHIFT 6 /* HPOUTLZC */
+#define WM8904_HPOUTLZC_WIDTH 1 /* HPOUTLZC */
+#define WM8904_HPOUTL_VOL_MASK 0x003F /* HPOUTL_VOL - [5:0] */
+#define WM8904_HPOUTL_VOL_SHIFT 0 /* HPOUTL_VOL - [5:0] */
+#define WM8904_HPOUTL_VOL_WIDTH 6 /* HPOUTL_VOL - [5:0] */
+
+/*
+ * R58 (0x3A) - Analogue OUT1 Right
+ */
+#define WM8904_HPOUTR_MUTE 0x0100 /* HPOUTR_MUTE */
+#define WM8904_HPOUTR_MUTE_MASK 0x0100 /* HPOUTR_MUTE */
+#define WM8904_HPOUTR_MUTE_SHIFT 8 /* HPOUTR_MUTE */
+#define WM8904_HPOUTR_MUTE_WIDTH 1 /* HPOUTR_MUTE */
+#define WM8904_HPOUT_VU 0x0080 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_MASK 0x0080 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_SHIFT 7 /* HPOUT_VU */
+#define WM8904_HPOUT_VU_WIDTH 1 /* HPOUT_VU */
+#define WM8904_HPOUTRZC 0x0040 /* HPOUTRZC */
+#define WM8904_HPOUTRZC_MASK 0x0040 /* HPOUTRZC */
+#define WM8904_HPOUTRZC_SHIFT 6 /* HPOUTRZC */
+#define WM8904_HPOUTRZC_WIDTH 1 /* HPOUTRZC */
+#define WM8904_HPOUTR_VOL_MASK 0x003F /* HPOUTR_VOL - [5:0] */
+#define WM8904_HPOUTR_VOL_SHIFT 0 /* HPOUTR_VOL - [5:0] */
+#define WM8904_HPOUTR_VOL_WIDTH 6 /* HPOUTR_VOL - [5:0] */
+
+/*
+ * R59 (0x3B) - Analogue OUT2 Left
+ */
+#define WM8904_LINEOUTL_MUTE 0x0100 /* LINEOUTL_MUTE */
+#define WM8904_LINEOUTL_MUTE_MASK 0x0100 /* LINEOUTL_MUTE */
+#define WM8904_LINEOUTL_MUTE_SHIFT 8 /* LINEOUTL_MUTE */
+#define WM8904_LINEOUTL_MUTE_WIDTH 1 /* LINEOUTL_MUTE */
+#define WM8904_LINEOUT_VU 0x0080 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_MASK 0x0080 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_SHIFT 7 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_WIDTH 1 /* LINEOUT_VU */
+#define WM8904_LINEOUTLZC 0x0040 /* LINEOUTLZC */
+#define WM8904_LINEOUTLZC_MASK 0x0040 /* LINEOUTLZC */
+#define WM8904_LINEOUTLZC_SHIFT 6 /* LINEOUTLZC */
+#define WM8904_LINEOUTLZC_WIDTH 1 /* LINEOUTLZC */
+#define WM8904_LINEOUTL_VOL_MASK 0x003F /* LINEOUTL_VOL - [5:0] */
+#define WM8904_LINEOUTL_VOL_SHIFT 0 /* LINEOUTL_VOL - [5:0] */
+#define WM8904_LINEOUTL_VOL_WIDTH 6 /* LINEOUTL_VOL - [5:0] */
+
+/*
+ * R60 (0x3C) - Analogue OUT2 Right
+ */
+#define WM8904_LINEOUTR_MUTE 0x0100 /* LINEOUTR_MUTE */
+#define WM8904_LINEOUTR_MUTE_MASK 0x0100 /* LINEOUTR_MUTE */
+#define WM8904_LINEOUTR_MUTE_SHIFT 8 /* LINEOUTR_MUTE */
+#define WM8904_LINEOUTR_MUTE_WIDTH 1 /* LINEOUTR_MUTE */
+#define WM8904_LINEOUT_VU 0x0080 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_MASK 0x0080 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_SHIFT 7 /* LINEOUT_VU */
+#define WM8904_LINEOUT_VU_WIDTH 1 /* LINEOUT_VU */
+#define WM8904_LINEOUTRZC 0x0040 /* LINEOUTRZC */
+#define WM8904_LINEOUTRZC_MASK 0x0040 /* LINEOUTRZC */
+#define WM8904_LINEOUTRZC_SHIFT 6 /* LINEOUTRZC */
+#define WM8904_LINEOUTRZC_WIDTH 1 /* LINEOUTRZC */
+#define WM8904_LINEOUTR_VOL_MASK 0x003F /* LINEOUTR_VOL - [5:0] */
+#define WM8904_LINEOUTR_VOL_SHIFT 0 /* LINEOUTR_VOL - [5:0] */
+#define WM8904_LINEOUTR_VOL_WIDTH 6 /* LINEOUTR_VOL - [5:0] */
+
+/*
+ * R61 (0x3D) - Analogue OUT12 ZC
+ */
+#define WM8904_HPL_BYP_ENA 0x0008 /* HPL_BYP_ENA */
+#define WM8904_HPL_BYP_ENA_MASK 0x0008 /* HPL_BYP_ENA */
+#define WM8904_HPL_BYP_ENA_SHIFT 3 /* HPL_BYP_ENA */
+#define WM8904_HPL_BYP_ENA_WIDTH 1 /* HPL_BYP_ENA */
+#define WM8904_HPR_BYP_ENA 0x0004 /* HPR_BYP_ENA */
+#define WM8904_HPR_BYP_ENA_MASK 0x0004 /* HPR_BYP_ENA */
+#define WM8904_HPR_BYP_ENA_SHIFT 2 /* HPR_BYP_ENA */
+#define WM8904_HPR_BYP_ENA_WIDTH 1 /* HPR_BYP_ENA */
+#define WM8904_LINEOUTL_BYP_ENA 0x0002 /* LINEOUTL_BYP_ENA */
+#define WM8904_LINEOUTL_BYP_ENA_MASK 0x0002 /* LINEOUTL_BYP_ENA */
+#define WM8904_LINEOUTL_BYP_ENA_SHIFT 1 /* LINEOUTL_BYP_ENA */
+#define WM8904_LINEOUTL_BYP_ENA_WIDTH 1 /* LINEOUTL_BYP_ENA */
+#define WM8904_LINEOUTR_BYP_ENA 0x0001 /* LINEOUTR_BYP_ENA */
+#define WM8904_LINEOUTR_BYP_ENA_MASK 0x0001 /* LINEOUTR_BYP_ENA */
+#define WM8904_LINEOUTR_BYP_ENA_SHIFT 0 /* LINEOUTR_BYP_ENA */
+#define WM8904_LINEOUTR_BYP_ENA_WIDTH 1 /* LINEOUTR_BYP_ENA */
+
+/*
+ * R67 (0x43) - DC Servo 0
+ */
+#define WM8904_DCS_ENA_CHAN_3 0x0008 /* DCS_ENA_CHAN_3 */
+#define WM8904_DCS_ENA_CHAN_3_MASK 0x0008 /* DCS_ENA_CHAN_3 */
+#define WM8904_DCS_ENA_CHAN_3_SHIFT 3 /* DCS_ENA_CHAN_3 */
+#define WM8904_DCS_ENA_CHAN_3_WIDTH 1 /* DCS_ENA_CHAN_3 */
+#define WM8904_DCS_ENA_CHAN_2 0x0004 /* DCS_ENA_CHAN_2 */
+#define WM8904_DCS_ENA_CHAN_2_MASK 0x0004 /* DCS_ENA_CHAN_2 */
+#define WM8904_DCS_ENA_CHAN_2_SHIFT 2 /* DCS_ENA_CHAN_2 */
+#define WM8904_DCS_ENA_CHAN_2_WIDTH 1 /* DCS_ENA_CHAN_2 */
+#define WM8904_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8904_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8904_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */
+#define WM8904_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */
+#define WM8904_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8904_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8904_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */
+#define WM8904_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */
+
+/*
+ * R68 (0x44) - DC Servo 1
+ */
+#define WM8904_DCS_TRIG_SINGLE_3 0x8000 /* DCS_TRIG_SINGLE_3 */
+#define WM8904_DCS_TRIG_SINGLE_3_MASK 0x8000 /* DCS_TRIG_SINGLE_3 */
+#define WM8904_DCS_TRIG_SINGLE_3_SHIFT 15 /* DCS_TRIG_SINGLE_3 */
+#define WM8904_DCS_TRIG_SINGLE_3_WIDTH 1 /* DCS_TRIG_SINGLE_3 */
+#define WM8904_DCS_TRIG_SINGLE_2 0x4000 /* DCS_TRIG_SINGLE_2 */
+#define WM8904_DCS_TRIG_SINGLE_2_MASK 0x4000 /* DCS_TRIG_SINGLE_2 */
+#define WM8904_DCS_TRIG_SINGLE_2_SHIFT 14 /* DCS_TRIG_SINGLE_2 */
+#define WM8904_DCS_TRIG_SINGLE_2_WIDTH 1 /* DCS_TRIG_SINGLE_2 */
+#define WM8904_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8904_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8904_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */
+#define WM8904_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */
+#define WM8904_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8904_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8904_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */
+#define WM8904_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */
+#define WM8904_DCS_TRIG_SERIES_3 0x0800 /* DCS_TRIG_SERIES_3 */
+#define WM8904_DCS_TRIG_SERIES_3_MASK 0x0800 /* DCS_TRIG_SERIES_3 */
+#define WM8904_DCS_TRIG_SERIES_3_SHIFT 11 /* DCS_TRIG_SERIES_3 */
+#define WM8904_DCS_TRIG_SERIES_3_WIDTH 1 /* DCS_TRIG_SERIES_3 */
+#define WM8904_DCS_TRIG_SERIES_2 0x0400 /* DCS_TRIG_SERIES_2 */
+#define WM8904_DCS_TRIG_SERIES_2_MASK 0x0400 /* DCS_TRIG_SERIES_2 */
+#define WM8904_DCS_TRIG_SERIES_2_SHIFT 10 /* DCS_TRIG_SERIES_2 */
+#define WM8904_DCS_TRIG_SERIES_2_WIDTH 1 /* DCS_TRIG_SERIES_2 */
+#define WM8904_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8904_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8904_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */
+#define WM8904_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */
+#define WM8904_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8904_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8904_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */
+#define WM8904_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */
+#define WM8904_DCS_TRIG_STARTUP_3 0x0080 /* DCS_TRIG_STARTUP_3 */
+#define WM8904_DCS_TRIG_STARTUP_3_MASK 0x0080 /* DCS_TRIG_STARTUP_3 */
+#define WM8904_DCS_TRIG_STARTUP_3_SHIFT 7 /* DCS_TRIG_STARTUP_3 */
+#define WM8904_DCS_TRIG_STARTUP_3_WIDTH 1 /* DCS_TRIG_STARTUP_3 */
+#define WM8904_DCS_TRIG_STARTUP_2 0x0040 /* DCS_TRIG_STARTUP_2 */
+#define WM8904_DCS_TRIG_STARTUP_2_MASK 0x0040 /* DCS_TRIG_STARTUP_2 */
+#define WM8904_DCS_TRIG_STARTUP_2_SHIFT 6 /* DCS_TRIG_STARTUP_2 */
+#define WM8904_DCS_TRIG_STARTUP_2_WIDTH 1 /* DCS_TRIG_STARTUP_2 */
+#define WM8904_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8904_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8904_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */
+#define WM8904_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */
+#define WM8904_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8904_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8904_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */
+#define WM8904_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */
+#define WM8904_DCS_TRIG_DAC_WR_3 0x0008 /* DCS_TRIG_DAC_WR_3 */
+#define WM8904_DCS_TRIG_DAC_WR_3_MASK 0x0008 /* DCS_TRIG_DAC_WR_3 */
+#define WM8904_DCS_TRIG_DAC_WR_3_SHIFT 3 /* DCS_TRIG_DAC_WR_3 */
+#define WM8904_DCS_TRIG_DAC_WR_3_WIDTH 1 /* DCS_TRIG_DAC_WR_3 */
+#define WM8904_DCS_TRIG_DAC_WR_2 0x0004 /* DCS_TRIG_DAC_WR_2 */
+#define WM8904_DCS_TRIG_DAC_WR_2_MASK 0x0004 /* DCS_TRIG_DAC_WR_2 */
+#define WM8904_DCS_TRIG_DAC_WR_2_SHIFT 2 /* DCS_TRIG_DAC_WR_2 */
+#define WM8904_DCS_TRIG_DAC_WR_2_WIDTH 1 /* DCS_TRIG_DAC_WR_2 */
+#define WM8904_DCS_TRIG_DAC_WR_1 0x0002 /* DCS_TRIG_DAC_WR_1 */
+#define WM8904_DCS_TRIG_DAC_WR_1_MASK 0x0002 /* DCS_TRIG_DAC_WR_1 */
+#define WM8904_DCS_TRIG_DAC_WR_1_SHIFT 1 /* DCS_TRIG_DAC_WR_1 */
+#define WM8904_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */
+#define WM8904_DCS_TRIG_DAC_WR_0 0x0001 /* DCS_TRIG_DAC_WR_0 */
+#define WM8904_DCS_TRIG_DAC_WR_0_MASK 0x0001 /* DCS_TRIG_DAC_WR_0 */
+#define WM8904_DCS_TRIG_DAC_WR_0_SHIFT 0 /* DCS_TRIG_DAC_WR_0 */
+#define WM8904_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */
+
+/*
+ * R69 (0x45) - DC Servo 2
+ */
+#define WM8904_DCS_TIMER_PERIOD_23_MASK 0x0F00 /* DCS_TIMER_PERIOD_23 - [11:8] */
+#define WM8904_DCS_TIMER_PERIOD_23_SHIFT 8 /* DCS_TIMER_PERIOD_23 - [11:8] */
+#define WM8904_DCS_TIMER_PERIOD_23_WIDTH 4 /* DCS_TIMER_PERIOD_23 - [11:8] */
+#define WM8904_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8904_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8904_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */
+
+/*
+ * R71 (0x47) - DC Servo 4
+ */
+#define WM8904_DCS_SERIES_NO_23_MASK 0x007F /* DCS_SERIES_NO_23 - [6:0] */
+#define WM8904_DCS_SERIES_NO_23_SHIFT 0 /* DCS_SERIES_NO_23 - [6:0] */
+#define WM8904_DCS_SERIES_NO_23_WIDTH 7 /* DCS_SERIES_NO_23 - [6:0] */
+
+/*
+ * R72 (0x48) - DC Servo 5
+ */
+#define WM8904_DCS_SERIES_NO_01_MASK 0x007F /* DCS_SERIES_NO_01 - [6:0] */
+#define WM8904_DCS_SERIES_NO_01_SHIFT 0 /* DCS_SERIES_NO_01 - [6:0] */
+#define WM8904_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [6:0] */
+
+/*
+ * R73 (0x49) - DC Servo 6
+ */
+#define WM8904_DCS_DAC_WR_VAL_3_MASK 0x00FF /* DCS_DAC_WR_VAL_3 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_3_SHIFT 0 /* DCS_DAC_WR_VAL_3 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_3_WIDTH 8 /* DCS_DAC_WR_VAL_3 - [7:0] */
+
+/*
+ * R74 (0x4A) - DC Servo 7
+ */
+#define WM8904_DCS_DAC_WR_VAL_2_MASK 0x00FF /* DCS_DAC_WR_VAL_2 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_2_SHIFT 0 /* DCS_DAC_WR_VAL_2 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_2_WIDTH 8 /* DCS_DAC_WR_VAL_2 - [7:0] */
+
+/*
+ * R75 (0x4B) - DC Servo 8
+ */
+#define WM8904_DCS_DAC_WR_VAL_1_MASK 0x00FF /* DCS_DAC_WR_VAL_1 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_1_SHIFT 0 /* DCS_DAC_WR_VAL_1 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [7:0] */
+
+/*
+ * R76 (0x4C) - DC Servo 9
+ */
+#define WM8904_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8904_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */
+
+/*
+ * R77 (0x4D) - DC Servo Readback 0
+ */
+#define WM8904_DCS_CAL_COMPLETE_MASK 0x0F00 /* DCS_CAL_COMPLETE - [11:8] */
+#define WM8904_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [11:8] */
+#define WM8904_DCS_CAL_COMPLETE_WIDTH 4 /* DCS_CAL_COMPLETE - [11:8] */
+#define WM8904_DCS_DAC_WR_COMPLETE_MASK 0x00F0 /* DCS_DAC_WR_COMPLETE - [7:4] */
+#define WM8904_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [7:4] */
+#define WM8904_DCS_DAC_WR_COMPLETE_WIDTH 4 /* DCS_DAC_WR_COMPLETE - [7:4] */
+#define WM8904_DCS_STARTUP_COMPLETE_MASK 0x000F /* DCS_STARTUP_COMPLETE - [3:0] */
+#define WM8904_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [3:0] */
+#define WM8904_DCS_STARTUP_COMPLETE_WIDTH 4 /* DCS_STARTUP_COMPLETE - [3:0] */
+
+/*
+ * R90 (0x5A) - Analogue HP 0
+ */
+#define WM8904_HPL_RMV_SHORT 0x0080 /* HPL_RMV_SHORT */
+#define WM8904_HPL_RMV_SHORT_MASK 0x0080 /* HPL_RMV_SHORT */
+#define WM8904_HPL_RMV_SHORT_SHIFT 7 /* HPL_RMV_SHORT */
+#define WM8904_HPL_RMV_SHORT_WIDTH 1 /* HPL_RMV_SHORT */
+#define WM8904_HPL_ENA_OUTP 0x0040 /* HPL_ENA_OUTP */
+#define WM8904_HPL_ENA_OUTP_MASK 0x0040 /* HPL_ENA_OUTP */
+#define WM8904_HPL_ENA_OUTP_SHIFT 6 /* HPL_ENA_OUTP */
+#define WM8904_HPL_ENA_OUTP_WIDTH 1 /* HPL_ENA_OUTP */
+#define WM8904_HPL_ENA_DLY 0x0020 /* HPL_ENA_DLY */
+#define WM8904_HPL_ENA_DLY_MASK 0x0020 /* HPL_ENA_DLY */
+#define WM8904_HPL_ENA_DLY_SHIFT 5 /* HPL_ENA_DLY */
+#define WM8904_HPL_ENA_DLY_WIDTH 1 /* HPL_ENA_DLY */
+#define WM8904_HPL_ENA 0x0010 /* HPL_ENA */
+#define WM8904_HPL_ENA_MASK 0x0010 /* HPL_ENA */
+#define WM8904_HPL_ENA_SHIFT 4 /* HPL_ENA */
+#define WM8904_HPL_ENA_WIDTH 1 /* HPL_ENA */
+#define WM8904_HPR_RMV_SHORT 0x0008 /* HPR_RMV_SHORT */
+#define WM8904_HPR_RMV_SHORT_MASK 0x0008 /* HPR_RMV_SHORT */
+#define WM8904_HPR_RMV_SHORT_SHIFT 3 /* HPR_RMV_SHORT */
+#define WM8904_HPR_RMV_SHORT_WIDTH 1 /* HPR_RMV_SHORT */
+#define WM8904_HPR_ENA_OUTP 0x0004 /* HPR_ENA_OUTP */
+#define WM8904_HPR_ENA_OUTP_MASK 0x0004 /* HPR_ENA_OUTP */
+#define WM8904_HPR_ENA_OUTP_SHIFT 2 /* HPR_ENA_OUTP */
+#define WM8904_HPR_ENA_OUTP_WIDTH 1 /* HPR_ENA_OUTP */
+#define WM8904_HPR_ENA_DLY 0x0002 /* HPR_ENA_DLY */
+#define WM8904_HPR_ENA_DLY_MASK 0x0002 /* HPR_ENA_DLY */
+#define WM8904_HPR_ENA_DLY_SHIFT 1 /* HPR_ENA_DLY */
+#define WM8904_HPR_ENA_DLY_WIDTH 1 /* HPR_ENA_DLY */
+#define WM8904_HPR_ENA 0x0001 /* HPR_ENA */
+#define WM8904_HPR_ENA_MASK 0x0001 /* HPR_ENA */
+#define WM8904_HPR_ENA_SHIFT 0 /* HPR_ENA */
+#define WM8904_HPR_ENA_WIDTH 1 /* HPR_ENA */
+
+/*
+ * R94 (0x5E) - Analogue Lineout 0
+ */
+#define WM8904_LINEOUTL_RMV_SHORT 0x0080 /* LINEOUTL_RMV_SHORT */
+#define WM8904_LINEOUTL_RMV_SHORT_MASK 0x0080 /* LINEOUTL_RMV_SHORT */
+#define WM8904_LINEOUTL_RMV_SHORT_SHIFT 7 /* LINEOUTL_RMV_SHORT */
+#define WM8904_LINEOUTL_RMV_SHORT_WIDTH 1 /* LINEOUTL_RMV_SHORT */
+#define WM8904_LINEOUTL_ENA_OUTP 0x0040 /* LINEOUTL_ENA_OUTP */
+#define WM8904_LINEOUTL_ENA_OUTP_MASK 0x0040 /* LINEOUTL_ENA_OUTP */
+#define WM8904_LINEOUTL_ENA_OUTP_SHIFT 6 /* LINEOUTL_ENA_OUTP */
+#define WM8904_LINEOUTL_ENA_OUTP_WIDTH 1 /* LINEOUTL_ENA_OUTP */
+#define WM8904_LINEOUTL_ENA_DLY 0x0020 /* LINEOUTL_ENA_DLY */
+#define WM8904_LINEOUTL_ENA_DLY_MASK 0x0020 /* LINEOUTL_ENA_DLY */
+#define WM8904_LINEOUTL_ENA_DLY_SHIFT 5 /* LINEOUTL_ENA_DLY */
+#define WM8904_LINEOUTL_ENA_DLY_WIDTH 1 /* LINEOUTL_ENA_DLY */
+#define WM8904_LINEOUTL_ENA 0x0010 /* LINEOUTL_ENA */
+#define WM8904_LINEOUTL_ENA_MASK 0x0010 /* LINEOUTL_ENA */
+#define WM8904_LINEOUTL_ENA_SHIFT 4 /* LINEOUTL_ENA */
+#define WM8904_LINEOUTL_ENA_WIDTH 1 /* LINEOUTL_ENA */
+#define WM8904_LINEOUTR_RMV_SHORT 0x0008 /* LINEOUTR_RMV_SHORT */
+#define WM8904_LINEOUTR_RMV_SHORT_MASK 0x0008 /* LINEOUTR_RMV_SHORT */
+#define WM8904_LINEOUTR_RMV_SHORT_SHIFT 3 /* LINEOUTR_RMV_SHORT */
+#define WM8904_LINEOUTR_RMV_SHORT_WIDTH 1 /* LINEOUTR_RMV_SHORT */
+#define WM8904_LINEOUTR_ENA_OUTP 0x0004 /* LINEOUTR_ENA_OUTP */
+#define WM8904_LINEOUTR_ENA_OUTP_MASK 0x0004 /* LINEOUTR_ENA_OUTP */
+#define WM8904_LINEOUTR_ENA_OUTP_SHIFT 2 /* LINEOUTR_ENA_OUTP */
+#define WM8904_LINEOUTR_ENA_OUTP_WIDTH 1 /* LINEOUTR_ENA_OUTP */
+#define WM8904_LINEOUTR_ENA_DLY 0x0002 /* LINEOUTR_ENA_DLY */
+#define WM8904_LINEOUTR_ENA_DLY_MASK 0x0002 /* LINEOUTR_ENA_DLY */
+#define WM8904_LINEOUTR_ENA_DLY_SHIFT 1 /* LINEOUTR_ENA_DLY */
+#define WM8904_LINEOUTR_ENA_DLY_WIDTH 1 /* LINEOUTR_ENA_DLY */
+#define WM8904_LINEOUTR_ENA 0x0001 /* LINEOUTR_ENA */
+#define WM8904_LINEOUTR_ENA_MASK 0x0001 /* LINEOUTR_ENA */
+#define WM8904_LINEOUTR_ENA_SHIFT 0 /* LINEOUTR_ENA */
+#define WM8904_LINEOUTR_ENA_WIDTH 1 /* LINEOUTR_ENA */
+
+/*
+ * R98 (0x62) - Charge Pump 0
+ */
+#define WM8904_CP_ENA 0x0001 /* CP_ENA */
+#define WM8904_CP_ENA_MASK 0x0001 /* CP_ENA */
+#define WM8904_CP_ENA_SHIFT 0 /* CP_ENA */
+#define WM8904_CP_ENA_WIDTH 1 /* CP_ENA */
+
+/*
+ * R104 (0x68) - Class W 0
+ */
+#define WM8904_CP_DYN_PWR 0x0001 /* CP_DYN_PWR */
+#define WM8904_CP_DYN_PWR_MASK 0x0001 /* CP_DYN_PWR */
+#define WM8904_CP_DYN_PWR_SHIFT 0 /* CP_DYN_PWR */
+#define WM8904_CP_DYN_PWR_WIDTH 1 /* CP_DYN_PWR */
+
+/*
+ * R108 (0x6C) - Write Sequencer 0
+ */
+#define WM8904_WSEQ_ENA 0x0100 /* WSEQ_ENA */
+#define WM8904_WSEQ_ENA_MASK 0x0100 /* WSEQ_ENA */
+#define WM8904_WSEQ_ENA_SHIFT 8 /* WSEQ_ENA */
+#define WM8904_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
+#define WM8904_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8904_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8904_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R109 (0x6D) - Write Sequencer 1
+ */
+#define WM8904_WSEQ_DATA_WIDTH_MASK 0x7000 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8904_WSEQ_DATA_WIDTH_SHIFT 12 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8904_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8904_WSEQ_DATA_START_MASK 0x0F00 /* WSEQ_DATA_START - [11:8] */
+#define WM8904_WSEQ_DATA_START_SHIFT 8 /* WSEQ_DATA_START - [11:8] */
+#define WM8904_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [11:8] */
+#define WM8904_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
+#define WM8904_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
+#define WM8904_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R110 (0x6E) - Write Sequencer 2
+ */
+#define WM8904_WSEQ_EOS 0x4000 /* WSEQ_EOS */
+#define WM8904_WSEQ_EOS_MASK 0x4000 /* WSEQ_EOS */
+#define WM8904_WSEQ_EOS_SHIFT 14 /* WSEQ_EOS */
+#define WM8904_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
+#define WM8904_WSEQ_DELAY_MASK 0x0F00 /* WSEQ_DELAY - [11:8] */
+#define WM8904_WSEQ_DELAY_SHIFT 8 /* WSEQ_DELAY - [11:8] */
+#define WM8904_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [11:8] */
+#define WM8904_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
+#define WM8904_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
+#define WM8904_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
+
+/*
+ * R111 (0x6F) - Write Sequencer 3
+ */
+#define WM8904_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */
+#define WM8904_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */
+#define WM8904_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */
+#define WM8904_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
+#define WM8904_WSEQ_START 0x0100 /* WSEQ_START */
+#define WM8904_WSEQ_START_MASK 0x0100 /* WSEQ_START */
+#define WM8904_WSEQ_START_SHIFT 8 /* WSEQ_START */
+#define WM8904_WSEQ_START_WIDTH 1 /* WSEQ_START */
+#define WM8904_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
+#define WM8904_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
+#define WM8904_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R112 (0x70) - Write Sequencer 4
+ */
+#define WM8904_WSEQ_CURRENT_INDEX_MASK 0x03F0 /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8904_WSEQ_CURRENT_INDEX_SHIFT 4 /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8904_WSEQ_CURRENT_INDEX_WIDTH 6 /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8904_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
+#define WM8904_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
+#define WM8904_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
+#define WM8904_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
+
+/*
+ * R116 (0x74) - FLL Control 1
+ */
+#define WM8904_FLL_FRACN_ENA 0x0004 /* FLL_FRACN_ENA */
+#define WM8904_FLL_FRACN_ENA_MASK 0x0004 /* FLL_FRACN_ENA */
+#define WM8904_FLL_FRACN_ENA_SHIFT 2 /* FLL_FRACN_ENA */
+#define WM8904_FLL_FRACN_ENA_WIDTH 1 /* FLL_FRACN_ENA */
+#define WM8904_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM8904_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM8904_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM8904_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM8904_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM8904_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM8904_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM8904_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R117 (0x75) - FLL Control 2
+ */
+#define WM8904_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
+#define WM8904_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
+#define WM8904_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
+#define WM8904_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM8904_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM8904_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM8904_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM8904_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM8904_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R118 (0x76) - FLL Control 3
+ */
+#define WM8904_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM8904_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM8904_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R119 (0x77) - FLL Control 4
+ */
+#define WM8904_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM8904_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM8904_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM8904_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM8904_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM8904_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R120 (0x78) - FLL Control 5
+ */
+#define WM8904_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8904_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8904_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8904_FLL_CLK_REF_SRC_MASK 0x0003 /* FLL_CLK_REF_SRC - [1:0] */
+#define WM8904_FLL_CLK_REF_SRC_SHIFT 0 /* FLL_CLK_REF_SRC - [1:0] */
+#define WM8904_FLL_CLK_REF_SRC_WIDTH 2 /* FLL_CLK_REF_SRC - [1:0] */
+
+/*
+ * R121 (0x79) - GPIO Control 1
+ */
+#define WM8904_GPIO1_PU 0x0020 /* GPIO1_PU */
+#define WM8904_GPIO1_PU_MASK 0x0020 /* GPIO1_PU */
+#define WM8904_GPIO1_PU_SHIFT 5 /* GPIO1_PU */
+#define WM8904_GPIO1_PU_WIDTH 1 /* GPIO1_PU */
+#define WM8904_GPIO1_PD 0x0010 /* GPIO1_PD */
+#define WM8904_GPIO1_PD_MASK 0x0010 /* GPIO1_PD */
+#define WM8904_GPIO1_PD_SHIFT 4 /* GPIO1_PD */
+#define WM8904_GPIO1_PD_WIDTH 1 /* GPIO1_PD */
+#define WM8904_GPIO1_SEL_MASK 0x000F /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_SHIFT 0 /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_WIDTH 4 /* GPIO1_SEL - [3:0] */
+
+/*
+ * R122 (0x7A) - GPIO Control 2
+ */
+#define WM8904_GPIO2_PU 0x0020 /* GPIO2_PU */
+#define WM8904_GPIO2_PU_MASK 0x0020 /* GPIO2_PU */
+#define WM8904_GPIO2_PU_SHIFT 5 /* GPIO2_PU */
+#define WM8904_GPIO2_PU_WIDTH 1 /* GPIO2_PU */
+#define WM8904_GPIO2_PD 0x0010 /* GPIO2_PD */
+#define WM8904_GPIO2_PD_MASK 0x0010 /* GPIO2_PD */
+#define WM8904_GPIO2_PD_SHIFT 4 /* GPIO2_PD */
+#define WM8904_GPIO2_PD_WIDTH 1 /* GPIO2_PD */
+#define WM8904_GPIO2_SEL_MASK 0x000F /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_SHIFT 0 /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_WIDTH 4 /* GPIO2_SEL - [3:0] */
+
+/*
+ * R123 (0x7B) - GPIO Control 3
+ */
+#define WM8904_GPIO3_PU 0x0020 /* GPIO3_PU */
+#define WM8904_GPIO3_PU_MASK 0x0020 /* GPIO3_PU */
+#define WM8904_GPIO3_PU_SHIFT 5 /* GPIO3_PU */
+#define WM8904_GPIO3_PU_WIDTH 1 /* GPIO3_PU */
+#define WM8904_GPIO3_PD 0x0010 /* GPIO3_PD */
+#define WM8904_GPIO3_PD_MASK 0x0010 /* GPIO3_PD */
+#define WM8904_GPIO3_PD_SHIFT 4 /* GPIO3_PD */
+#define WM8904_GPIO3_PD_WIDTH 1 /* GPIO3_PD */
+#define WM8904_GPIO3_SEL_MASK 0x000F /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_SHIFT 0 /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_WIDTH 4 /* GPIO3_SEL - [3:0] */
+
+/*
+ * R124 (0x7C) - GPIO Control 4
+ */
+#define WM8904_GPI7_ENA 0x0200 /* GPI7_ENA */
+#define WM8904_GPI7_ENA_MASK 0x0200 /* GPI7_ENA */
+#define WM8904_GPI7_ENA_SHIFT 9 /* GPI7_ENA */
+#define WM8904_GPI7_ENA_WIDTH 1 /* GPI7_ENA */
+#define WM8904_GPI8_ENA 0x0100 /* GPI8_ENA */
+#define WM8904_GPI8_ENA_MASK 0x0100 /* GPI8_ENA */
+#define WM8904_GPI8_ENA_SHIFT 8 /* GPI8_ENA */
+#define WM8904_GPI8_ENA_WIDTH 1 /* GPI8_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA 0x0080 /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_MASK 0x0080 /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT 7 /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH 1 /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_SEL_MASK 0x000F /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_SHIFT 0 /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_WIDTH 4 /* GPIO_BCLK_SEL - [3:0] */
+
+/*
+ * R126 (0x7E) - Digital Pulls
+ */
+#define WM8904_MCLK_PU 0x0080 /* MCLK_PU */
+#define WM8904_MCLK_PU_MASK 0x0080 /* MCLK_PU */
+#define WM8904_MCLK_PU_SHIFT 7 /* MCLK_PU */
+#define WM8904_MCLK_PU_WIDTH 1 /* MCLK_PU */
+#define WM8904_MCLK_PD 0x0040 /* MCLK_PD */
+#define WM8904_MCLK_PD_MASK 0x0040 /* MCLK_PD */
+#define WM8904_MCLK_PD_SHIFT 6 /* MCLK_PD */
+#define WM8904_MCLK_PD_WIDTH 1 /* MCLK_PD */
+#define WM8904_DACDAT_PU 0x0020 /* DACDAT_PU */
+#define WM8904_DACDAT_PU_MASK 0x0020 /* DACDAT_PU */
+#define WM8904_DACDAT_PU_SHIFT 5 /* DACDAT_PU */
+#define WM8904_DACDAT_PU_WIDTH 1 /* DACDAT_PU */
+#define WM8904_DACDAT_PD 0x0010 /* DACDAT_PD */
+#define WM8904_DACDAT_PD_MASK 0x0010 /* DACDAT_PD */
+#define WM8904_DACDAT_PD_SHIFT 4 /* DACDAT_PD */
+#define WM8904_DACDAT_PD_WIDTH 1 /* DACDAT_PD */
+#define WM8904_LRCLK_PU 0x0008 /* LRCLK_PU */
+#define WM8904_LRCLK_PU_MASK 0x0008 /* LRCLK_PU */
+#define WM8904_LRCLK_PU_SHIFT 3 /* LRCLK_PU */
+#define WM8904_LRCLK_PU_WIDTH 1 /* LRCLK_PU */
+#define WM8904_LRCLK_PD 0x0004 /* LRCLK_PD */
+#define WM8904_LRCLK_PD_MASK 0x0004 /* LRCLK_PD */
+#define WM8904_LRCLK_PD_SHIFT 2 /* LRCLK_PD */
+#define WM8904_LRCLK_PD_WIDTH 1 /* LRCLK_PD */
+#define WM8904_BCLK_PU 0x0002 /* BCLK_PU */
+#define WM8904_BCLK_PU_MASK 0x0002 /* BCLK_PU */
+#define WM8904_BCLK_PU_SHIFT 1 /* BCLK_PU */
+#define WM8904_BCLK_PU_WIDTH 1 /* BCLK_PU */
+#define WM8904_BCLK_PD 0x0001 /* BCLK_PD */
+#define WM8904_BCLK_PD_MASK 0x0001 /* BCLK_PD */
+#define WM8904_BCLK_PD_SHIFT 0 /* BCLK_PD */
+#define WM8904_BCLK_PD_WIDTH 1 /* BCLK_PD */
+
+/*
+ * R127 (0x7F) - Interrupt Status
+ */
+#define WM8904_IRQ 0x0400 /* IRQ */
+#define WM8904_IRQ_MASK 0x0400 /* IRQ */
+#define WM8904_IRQ_SHIFT 10 /* IRQ */
+#define WM8904_IRQ_WIDTH 1 /* IRQ */
+#define WM8904_GPIO_BCLK_EINT 0x0200 /* GPIO_BCLK_EINT */
+#define WM8904_GPIO_BCLK_EINT_MASK 0x0200 /* GPIO_BCLK_EINT */
+#define WM8904_GPIO_BCLK_EINT_SHIFT 9 /* GPIO_BCLK_EINT */
+#define WM8904_GPIO_BCLK_EINT_WIDTH 1 /* GPIO_BCLK_EINT */
+#define WM8904_WSEQ_EINT 0x0100 /* WSEQ_EINT */
+#define WM8904_WSEQ_EINT_MASK 0x0100 /* WSEQ_EINT */
+#define WM8904_WSEQ_EINT_SHIFT 8 /* WSEQ_EINT */
+#define WM8904_WSEQ_EINT_WIDTH 1 /* WSEQ_EINT */
+#define WM8904_GPIO3_EINT 0x0080 /* GPIO3_EINT */
+#define WM8904_GPIO3_EINT_MASK 0x0080 /* GPIO3_EINT */
+#define WM8904_GPIO3_EINT_SHIFT 7 /* GPIO3_EINT */
+#define WM8904_GPIO3_EINT_WIDTH 1 /* GPIO3_EINT */
+#define WM8904_GPIO2_EINT 0x0040 /* GPIO2_EINT */
+#define WM8904_GPIO2_EINT_MASK 0x0040 /* GPIO2_EINT */
+#define WM8904_GPIO2_EINT_SHIFT 6 /* GPIO2_EINT */
+#define WM8904_GPIO2_EINT_WIDTH 1 /* GPIO2_EINT */
+#define WM8904_GPIO1_EINT 0x0020 /* GPIO1_EINT */
+#define WM8904_GPIO1_EINT_MASK 0x0020 /* GPIO1_EINT */
+#define WM8904_GPIO1_EINT_SHIFT 5 /* GPIO1_EINT */
+#define WM8904_GPIO1_EINT_WIDTH 1 /* GPIO1_EINT */
+#define WM8904_GPI8_EINT 0x0010 /* GPI8_EINT */
+#define WM8904_GPI8_EINT_MASK 0x0010 /* GPI8_EINT */
+#define WM8904_GPI8_EINT_SHIFT 4 /* GPI8_EINT */
+#define WM8904_GPI8_EINT_WIDTH 1 /* GPI8_EINT */
+#define WM8904_GPI7_EINT 0x0008 /* GPI7_EINT */
+#define WM8904_GPI7_EINT_MASK 0x0008 /* GPI7_EINT */
+#define WM8904_GPI7_EINT_SHIFT 3 /* GPI7_EINT */
+#define WM8904_GPI7_EINT_WIDTH 1 /* GPI7_EINT */
+#define WM8904_FLL_LOCK_EINT 0x0004 /* FLL_LOCK_EINT */
+#define WM8904_FLL_LOCK_EINT_MASK 0x0004 /* FLL_LOCK_EINT */
+#define WM8904_FLL_LOCK_EINT_SHIFT 2 /* FLL_LOCK_EINT */
+#define WM8904_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */
+#define WM8904_MIC_SHRT_EINT 0x0002 /* MIC_SHRT_EINT */
+#define WM8904_MIC_SHRT_EINT_MASK 0x0002 /* MIC_SHRT_EINT */
+#define WM8904_MIC_SHRT_EINT_SHIFT 1 /* MIC_SHRT_EINT */
+#define WM8904_MIC_SHRT_EINT_WIDTH 1 /* MIC_SHRT_EINT */
+#define WM8904_MIC_DET_EINT 0x0001 /* MIC_DET_EINT */
+#define WM8904_MIC_DET_EINT_MASK 0x0001 /* MIC_DET_EINT */
+#define WM8904_MIC_DET_EINT_SHIFT 0 /* MIC_DET_EINT */
+#define WM8904_MIC_DET_EINT_WIDTH 1 /* MIC_DET_EINT */
+
+/*
+ * R128 (0x80) - Interrupt Status Mask
+ */
+#define WM8904_IM_GPIO_BCLK_EINT 0x0200 /* IM_GPIO_BCLK_EINT */
+#define WM8904_IM_GPIO_BCLK_EINT_MASK 0x0200 /* IM_GPIO_BCLK_EINT */
+#define WM8904_IM_GPIO_BCLK_EINT_SHIFT 9 /* IM_GPIO_BCLK_EINT */
+#define WM8904_IM_GPIO_BCLK_EINT_WIDTH 1 /* IM_GPIO_BCLK_EINT */
+#define WM8904_IM_WSEQ_EINT 0x0100 /* IM_WSEQ_EINT */
+#define WM8904_IM_WSEQ_EINT_MASK 0x0100 /* IM_WSEQ_EINT */
+#define WM8904_IM_WSEQ_EINT_SHIFT 8 /* IM_WSEQ_EINT */
+#define WM8904_IM_WSEQ_EINT_WIDTH 1 /* IM_WSEQ_EINT */
+#define WM8904_IM_GPIO3_EINT 0x0080 /* IM_GPIO3_EINT */
+#define WM8904_IM_GPIO3_EINT_MASK 0x0080 /* IM_GPIO3_EINT */
+#define WM8904_IM_GPIO3_EINT_SHIFT 7 /* IM_GPIO3_EINT */
+#define WM8904_IM_GPIO3_EINT_WIDTH 1 /* IM_GPIO3_EINT */
+#define WM8904_IM_GPIO2_EINT 0x0040 /* IM_GPIO2_EINT */
+#define WM8904_IM_GPIO2_EINT_MASK 0x0040 /* IM_GPIO2_EINT */
+#define WM8904_IM_GPIO2_EINT_SHIFT 6 /* IM_GPIO2_EINT */
+#define WM8904_IM_GPIO2_EINT_WIDTH 1 /* IM_GPIO2_EINT */
+#define WM8904_IM_GPIO1_EINT 0x0020 /* IM_GPIO1_EINT */
+#define WM8904_IM_GPIO1_EINT_MASK 0x0020 /* IM_GPIO1_EINT */
+#define WM8904_IM_GPIO1_EINT_SHIFT 5 /* IM_GPIO1_EINT */
+#define WM8904_IM_GPIO1_EINT_WIDTH 1 /* IM_GPIO1_EINT */
+#define WM8904_IM_GPI8_EINT 0x0010 /* IM_GPI8_EINT */
+#define WM8904_IM_GPI8_EINT_MASK 0x0010 /* IM_GPI8_EINT */
+#define WM8904_IM_GPI8_EINT_SHIFT 4 /* IM_GPI8_EINT */
+#define WM8904_IM_GPI8_EINT_WIDTH 1 /* IM_GPI8_EINT */
+#define WM8904_IM_GPI7_EINT 0x0008 /* IM_GPI7_EINT */
+#define WM8904_IM_GPI7_EINT_MASK 0x0008 /* IM_GPI7_EINT */
+#define WM8904_IM_GPI7_EINT_SHIFT 3 /* IM_GPI7_EINT */
+#define WM8904_IM_GPI7_EINT_WIDTH 1 /* IM_GPI7_EINT */
+#define WM8904_IM_FLL_LOCK_EINT 0x0004 /* IM_FLL_LOCK_EINT */
+#define WM8904_IM_FLL_LOCK_EINT_MASK 0x0004 /* IM_FLL_LOCK_EINT */
+#define WM8904_IM_FLL_LOCK_EINT_SHIFT 2 /* IM_FLL_LOCK_EINT */
+#define WM8904_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */
+#define WM8904_IM_MIC_SHRT_EINT 0x0002 /* IM_MIC_SHRT_EINT */
+#define WM8904_IM_MIC_SHRT_EINT_MASK 0x0002 /* IM_MIC_SHRT_EINT */
+#define WM8904_IM_MIC_SHRT_EINT_SHIFT 1 /* IM_MIC_SHRT_EINT */
+#define WM8904_IM_MIC_SHRT_EINT_WIDTH 1 /* IM_MIC_SHRT_EINT */
+#define WM8904_IM_MIC_DET_EINT 0x0001 /* IM_MIC_DET_EINT */
+#define WM8904_IM_MIC_DET_EINT_MASK 0x0001 /* IM_MIC_DET_EINT */
+#define WM8904_IM_MIC_DET_EINT_SHIFT 0 /* IM_MIC_DET_EINT */
+#define WM8904_IM_MIC_DET_EINT_WIDTH 1 /* IM_MIC_DET_EINT */
+
+/*
+ * R129 (0x81) - Interrupt Polarity
+ */
+#define WM8904_GPIO_BCLK_EINT_POL 0x0200 /* GPIO_BCLK_EINT_POL */
+#define WM8904_GPIO_BCLK_EINT_POL_MASK 0x0200 /* GPIO_BCLK_EINT_POL */
+#define WM8904_GPIO_BCLK_EINT_POL_SHIFT 9 /* GPIO_BCLK_EINT_POL */
+#define WM8904_GPIO_BCLK_EINT_POL_WIDTH 1 /* GPIO_BCLK_EINT_POL */
+#define WM8904_WSEQ_EINT_POL 0x0100 /* WSEQ_EINT_POL */
+#define WM8904_WSEQ_EINT_POL_MASK 0x0100 /* WSEQ_EINT_POL */
+#define WM8904_WSEQ_EINT_POL_SHIFT 8 /* WSEQ_EINT_POL */
+#define WM8904_WSEQ_EINT_POL_WIDTH 1 /* WSEQ_EINT_POL */
+#define WM8904_GPIO3_EINT_POL 0x0080 /* GPIO3_EINT_POL */
+#define WM8904_GPIO3_EINT_POL_MASK 0x0080 /* GPIO3_EINT_POL */
+#define WM8904_GPIO3_EINT_POL_SHIFT 7 /* GPIO3_EINT_POL */
+#define WM8904_GPIO3_EINT_POL_WIDTH 1 /* GPIO3_EINT_POL */
+#define WM8904_GPIO2_EINT_POL 0x0040 /* GPIO2_EINT_POL */
+#define WM8904_GPIO2_EINT_POL_MASK 0x0040 /* GPIO2_EINT_POL */
+#define WM8904_GPIO2_EINT_POL_SHIFT 6 /* GPIO2_EINT_POL */
+#define WM8904_GPIO2_EINT_POL_WIDTH 1 /* GPIO2_EINT_POL */
+#define WM8904_GPIO1_EINT_POL 0x0020 /* GPIO1_EINT_POL */
+#define WM8904_GPIO1_EINT_POL_MASK 0x0020 /* GPIO1_EINT_POL */
+#define WM8904_GPIO1_EINT_POL_SHIFT 5 /* GPIO1_EINT_POL */
+#define WM8904_GPIO1_EINT_POL_WIDTH 1 /* GPIO1_EINT_POL */
+#define WM8904_GPI8_EINT_POL 0x0010 /* GPI8_EINT_POL */
+#define WM8904_GPI8_EINT_POL_MASK 0x0010 /* GPI8_EINT_POL */
+#define WM8904_GPI8_EINT_POL_SHIFT 4 /* GPI8_EINT_POL */
+#define WM8904_GPI8_EINT_POL_WIDTH 1 /* GPI8_EINT_POL */
+#define WM8904_GPI7_EINT_POL 0x0008 /* GPI7_EINT_POL */
+#define WM8904_GPI7_EINT_POL_MASK 0x0008 /* GPI7_EINT_POL */
+#define WM8904_GPI7_EINT_POL_SHIFT 3 /* GPI7_EINT_POL */
+#define WM8904_GPI7_EINT_POL_WIDTH 1 /* GPI7_EINT_POL */
+#define WM8904_FLL_LOCK_EINT_POL 0x0004 /* FLL_LOCK_EINT_POL */
+#define WM8904_FLL_LOCK_EINT_POL_MASK 0x0004 /* FLL_LOCK_EINT_POL */
+#define WM8904_FLL_LOCK_EINT_POL_SHIFT 2 /* FLL_LOCK_EINT_POL */
+#define WM8904_FLL_LOCK_EINT_POL_WIDTH 1 /* FLL_LOCK_EINT_POL */
+#define WM8904_MIC_SHRT_EINT_POL 0x0002 /* MIC_SHRT_EINT_POL */
+#define WM8904_MIC_SHRT_EINT_POL_MASK 0x0002 /* MIC_SHRT_EINT_POL */
+#define WM8904_MIC_SHRT_EINT_POL_SHIFT 1 /* MIC_SHRT_EINT_POL */
+#define WM8904_MIC_SHRT_EINT_POL_WIDTH 1 /* MIC_SHRT_EINT_POL */
+#define WM8904_MIC_DET_EINT_POL 0x0001 /* MIC_DET_EINT_POL */
+#define WM8904_MIC_DET_EINT_POL_MASK 0x0001 /* MIC_DET_EINT_POL */
+#define WM8904_MIC_DET_EINT_POL_SHIFT 0 /* MIC_DET_EINT_POL */
+#define WM8904_MIC_DET_EINT_POL_WIDTH 1 /* MIC_DET_EINT_POL */
+
+/*
+ * R130 (0x82) - Interrupt Debounce
+ */
+#define WM8904_GPIO_BCLK_EINT_DB 0x0200 /* GPIO_BCLK_EINT_DB */
+#define WM8904_GPIO_BCLK_EINT_DB_MASK 0x0200 /* GPIO_BCLK_EINT_DB */
+#define WM8904_GPIO_BCLK_EINT_DB_SHIFT 9 /* GPIO_BCLK_EINT_DB */
+#define WM8904_GPIO_BCLK_EINT_DB_WIDTH 1 /* GPIO_BCLK_EINT_DB */
+#define WM8904_WSEQ_EINT_DB 0x0100 /* WSEQ_EINT_DB */
+#define WM8904_WSEQ_EINT_DB_MASK 0x0100 /* WSEQ_EINT_DB */
+#define WM8904_WSEQ_EINT_DB_SHIFT 8 /* WSEQ_EINT_DB */
+#define WM8904_WSEQ_EINT_DB_WIDTH 1 /* WSEQ_EINT_DB */
+#define WM8904_GPIO3_EINT_DB 0x0080 /* GPIO3_EINT_DB */
+#define WM8904_GPIO3_EINT_DB_MASK 0x0080 /* GPIO3_EINT_DB */
+#define WM8904_GPIO3_EINT_DB_SHIFT 7 /* GPIO3_EINT_DB */
+#define WM8904_GPIO3_EINT_DB_WIDTH 1 /* GPIO3_EINT_DB */
+#define WM8904_GPIO2_EINT_DB 0x0040 /* GPIO2_EINT_DB */
+#define WM8904_GPIO2_EINT_DB_MASK 0x0040 /* GPIO2_EINT_DB */
+#define WM8904_GPIO2_EINT_DB_SHIFT 6 /* GPIO2_EINT_DB */
+#define WM8904_GPIO2_EINT_DB_WIDTH 1 /* GPIO2_EINT_DB */
+#define WM8904_GPIO1_EINT_DB 0x0020 /* GPIO1_EINT_DB */
+#define WM8904_GPIO1_EINT_DB_MASK 0x0020 /* GPIO1_EINT_DB */
+#define WM8904_GPIO1_EINT_DB_SHIFT 5 /* GPIO1_EINT_DB */
+#define WM8904_GPIO1_EINT_DB_WIDTH 1 /* GPIO1_EINT_DB */
+#define WM8904_GPI8_EINT_DB 0x0010 /* GPI8_EINT_DB */
+#define WM8904_GPI8_EINT_DB_MASK 0x0010 /* GPI8_EINT_DB */
+#define WM8904_GPI8_EINT_DB_SHIFT 4 /* GPI8_EINT_DB */
+#define WM8904_GPI8_EINT_DB_WIDTH 1 /* GPI8_EINT_DB */
+#define WM8904_GPI7_EINT_DB 0x0008 /* GPI7_EINT_DB */
+#define WM8904_GPI7_EINT_DB_MASK 0x0008 /* GPI7_EINT_DB */
+#define WM8904_GPI7_EINT_DB_SHIFT 3 /* GPI7_EINT_DB */
+#define WM8904_GPI7_EINT_DB_WIDTH 1 /* GPI7_EINT_DB */
+#define WM8904_FLL_LOCK_EINT_DB 0x0004 /* FLL_LOCK_EINT_DB */
+#define WM8904_FLL_LOCK_EINT_DB_MASK 0x0004 /* FLL_LOCK_EINT_DB */
+#define WM8904_FLL_LOCK_EINT_DB_SHIFT 2 /* FLL_LOCK_EINT_DB */
+#define WM8904_FLL_LOCK_EINT_DB_WIDTH 1 /* FLL_LOCK_EINT_DB */
+#define WM8904_MIC_SHRT_EINT_DB 0x0002 /* MIC_SHRT_EINT_DB */
+#define WM8904_MIC_SHRT_EINT_DB_MASK 0x0002 /* MIC_SHRT_EINT_DB */
+#define WM8904_MIC_SHRT_EINT_DB_SHIFT 1 /* MIC_SHRT_EINT_DB */
+#define WM8904_MIC_SHRT_EINT_DB_WIDTH 1 /* MIC_SHRT_EINT_DB */
+#define WM8904_MIC_DET_EINT_DB 0x0001 /* MIC_DET_EINT_DB */
+#define WM8904_MIC_DET_EINT_DB_MASK 0x0001 /* MIC_DET_EINT_DB */
+#define WM8904_MIC_DET_EINT_DB_SHIFT 0 /* MIC_DET_EINT_DB */
+#define WM8904_MIC_DET_EINT_DB_WIDTH 1 /* MIC_DET_EINT_DB */
+
+/*
+ * R134 (0x86) - EQ1
+ */
+#define WM8904_EQ_ENA 0x0001 /* EQ_ENA */
+#define WM8904_EQ_ENA_MASK 0x0001 /* EQ_ENA */
+#define WM8904_EQ_ENA_SHIFT 0 /* EQ_ENA */
+#define WM8904_EQ_ENA_WIDTH 1 /* EQ_ENA */
+
+/*
+ * R135 (0x87) - EQ2
+ */
+#define WM8904_EQ_B1_GAIN_MASK 0x001F /* EQ_B1_GAIN - [4:0] */
+#define WM8904_EQ_B1_GAIN_SHIFT 0 /* EQ_B1_GAIN - [4:0] */
+#define WM8904_EQ_B1_GAIN_WIDTH 5 /* EQ_B1_GAIN - [4:0] */
+
+/*
+ * R136 (0x88) - EQ3
+ */
+#define WM8904_EQ_B2_GAIN_MASK 0x001F /* EQ_B2_GAIN - [4:0] */
+#define WM8904_EQ_B2_GAIN_SHIFT 0 /* EQ_B2_GAIN - [4:0] */
+#define WM8904_EQ_B2_GAIN_WIDTH 5 /* EQ_B2_GAIN - [4:0] */
+
+/*
+ * R137 (0x89) - EQ4
+ */
+#define WM8904_EQ_B3_GAIN_MASK 0x001F /* EQ_B3_GAIN - [4:0] */
+#define WM8904_EQ_B3_GAIN_SHIFT 0 /* EQ_B3_GAIN - [4:0] */
+#define WM8904_EQ_B3_GAIN_WIDTH 5 /* EQ_B3_GAIN - [4:0] */
+
+/*
+ * R138 (0x8A) - EQ5
+ */
+#define WM8904_EQ_B4_GAIN_MASK 0x001F /* EQ_B4_GAIN - [4:0] */
+#define WM8904_EQ_B4_GAIN_SHIFT 0 /* EQ_B4_GAIN - [4:0] */
+#define WM8904_EQ_B4_GAIN_WIDTH 5 /* EQ_B4_GAIN - [4:0] */
+
+/*
+ * R139 (0x8B) - EQ6
+ */
+#define WM8904_EQ_B5_GAIN_MASK 0x001F /* EQ_B5_GAIN - [4:0] */
+#define WM8904_EQ_B5_GAIN_SHIFT 0 /* EQ_B5_GAIN - [4:0] */
+#define WM8904_EQ_B5_GAIN_WIDTH 5 /* EQ_B5_GAIN - [4:0] */
+
+/*
+ * R140 (0x8C) - EQ7
+ */
+#define WM8904_EQ_B1_A_MASK 0xFFFF /* EQ_B1_A - [15:0] */
+#define WM8904_EQ_B1_A_SHIFT 0 /* EQ_B1_A - [15:0] */
+#define WM8904_EQ_B1_A_WIDTH 16 /* EQ_B1_A - [15:0] */
+
+/*
+ * R141 (0x8D) - EQ8
+ */
+#define WM8904_EQ_B1_B_MASK 0xFFFF /* EQ_B1_B - [15:0] */
+#define WM8904_EQ_B1_B_SHIFT 0 /* EQ_B1_B - [15:0] */
+#define WM8904_EQ_B1_B_WIDTH 16 /* EQ_B1_B - [15:0] */
+
+/*
+ * R142 (0x8E) - EQ9
+ */
+#define WM8904_EQ_B1_PG_MASK 0xFFFF /* EQ_B1_PG - [15:0] */
+#define WM8904_EQ_B1_PG_SHIFT 0 /* EQ_B1_PG - [15:0] */
+#define WM8904_EQ_B1_PG_WIDTH 16 /* EQ_B1_PG - [15:0] */
+
+/*
+ * R143 (0x8F) - EQ10
+ */
+#define WM8904_EQ_B2_A_MASK 0xFFFF /* EQ_B2_A - [15:0] */
+#define WM8904_EQ_B2_A_SHIFT 0 /* EQ_B2_A - [15:0] */
+#define WM8904_EQ_B2_A_WIDTH 16 /* EQ_B2_A - [15:0] */
+
+/*
+ * R144 (0x90) - EQ11
+ */
+#define WM8904_EQ_B2_B_MASK 0xFFFF /* EQ_B2_B - [15:0] */
+#define WM8904_EQ_B2_B_SHIFT 0 /* EQ_B2_B - [15:0] */
+#define WM8904_EQ_B2_B_WIDTH 16 /* EQ_B2_B - [15:0] */
+
+/*
+ * R145 (0x91) - EQ12
+ */
+#define WM8904_EQ_B2_C_MASK 0xFFFF /* EQ_B2_C - [15:0] */
+#define WM8904_EQ_B2_C_SHIFT 0 /* EQ_B2_C - [15:0] */
+#define WM8904_EQ_B2_C_WIDTH 16 /* EQ_B2_C - [15:0] */
+
+/*
+ * R146 (0x92) - EQ13
+ */
+#define WM8904_EQ_B2_PG_MASK 0xFFFF /* EQ_B2_PG - [15:0] */
+#define WM8904_EQ_B2_PG_SHIFT 0 /* EQ_B2_PG - [15:0] */
+#define WM8904_EQ_B2_PG_WIDTH 16 /* EQ_B2_PG - [15:0] */
+
+/*
+ * R147 (0x93) - EQ14
+ */
+#define WM8904_EQ_B3_A_MASK 0xFFFF /* EQ_B3_A - [15:0] */
+#define WM8904_EQ_B3_A_SHIFT 0 /* EQ_B3_A - [15:0] */
+#define WM8904_EQ_B3_A_WIDTH 16 /* EQ_B3_A - [15:0] */
+
+/*
+ * R148 (0x94) - EQ15
+ */
+#define WM8904_EQ_B3_B_MASK 0xFFFF /* EQ_B3_B - [15:0] */
+#define WM8904_EQ_B3_B_SHIFT 0 /* EQ_B3_B - [15:0] */
+#define WM8904_EQ_B3_B_WIDTH 16 /* EQ_B3_B - [15:0] */
+
+/*
+ * R149 (0x95) - EQ16
+ */
+#define WM8904_EQ_B3_C_MASK 0xFFFF /* EQ_B3_C - [15:0] */
+#define WM8904_EQ_B3_C_SHIFT 0 /* EQ_B3_C - [15:0] */
+#define WM8904_EQ_B3_C_WIDTH 16 /* EQ_B3_C - [15:0] */
+
+/*
+ * R150 (0x96) - EQ17
+ */
+#define WM8904_EQ_B3_PG_MASK 0xFFFF /* EQ_B3_PG - [15:0] */
+#define WM8904_EQ_B3_PG_SHIFT 0 /* EQ_B3_PG - [15:0] */
+#define WM8904_EQ_B3_PG_WIDTH 16 /* EQ_B3_PG - [15:0] */
+
+/*
+ * R151 (0x97) - EQ18
+ */
+#define WM8904_EQ_B4_A_MASK 0xFFFF /* EQ_B4_A - [15:0] */
+#define WM8904_EQ_B4_A_SHIFT 0 /* EQ_B4_A - [15:0] */
+#define WM8904_EQ_B4_A_WIDTH 16 /* EQ_B4_A - [15:0] */
+
+/*
+ * R152 (0x98) - EQ19
+ */
+#define WM8904_EQ_B4_B_MASK 0xFFFF /* EQ_B4_B - [15:0] */
+#define WM8904_EQ_B4_B_SHIFT 0 /* EQ_B4_B - [15:0] */
+#define WM8904_EQ_B4_B_WIDTH 16 /* EQ_B4_B - [15:0] */
+
+/*
+ * R153 (0x99) - EQ20
+ */
+#define WM8904_EQ_B4_C_MASK 0xFFFF /* EQ_B4_C - [15:0] */
+#define WM8904_EQ_B4_C_SHIFT 0 /* EQ_B4_C - [15:0] */
+#define WM8904_EQ_B4_C_WIDTH 16 /* EQ_B4_C - [15:0] */
+
+/*
+ * R154 (0x9A) - EQ21
+ */
+#define WM8904_EQ_B4_PG_MASK 0xFFFF /* EQ_B4_PG - [15:0] */
+#define WM8904_EQ_B4_PG_SHIFT 0 /* EQ_B4_PG - [15:0] */
+#define WM8904_EQ_B4_PG_WIDTH 16 /* EQ_B4_PG - [15:0] */
+
+/*
+ * R155 (0x9B) - EQ22
+ */
+#define WM8904_EQ_B5_A_MASK 0xFFFF /* EQ_B5_A - [15:0] */
+#define WM8904_EQ_B5_A_SHIFT 0 /* EQ_B5_A - [15:0] */
+#define WM8904_EQ_B5_A_WIDTH 16 /* EQ_B5_A - [15:0] */
+
+/*
+ * R156 (0x9C) - EQ23
+ */
+#define WM8904_EQ_B5_B_MASK 0xFFFF /* EQ_B5_B - [15:0] */
+#define WM8904_EQ_B5_B_SHIFT 0 /* EQ_B5_B - [15:0] */
+#define WM8904_EQ_B5_B_WIDTH 16 /* EQ_B5_B - [15:0] */
+
+/*
+ * R157 (0x9D) - EQ24
+ */
+#define WM8904_EQ_B5_PG_MASK 0xFFFF /* EQ_B5_PG - [15:0] */
+#define WM8904_EQ_B5_PG_SHIFT 0 /* EQ_B5_PG - [15:0] */
+#define WM8904_EQ_B5_PG_WIDTH 16 /* EQ_B5_PG - [15:0] */
+
+/*
+ * R161 (0xA1) - Control Interface Test 1
+ */
+#define WM8904_USER_KEY 0x0002 /* USER_KEY */
+#define WM8904_USER_KEY_MASK 0x0002 /* USER_KEY */
+#define WM8904_USER_KEY_SHIFT 1 /* USER_KEY */
+#define WM8904_USER_KEY_WIDTH 1 /* USER_KEY */
+
+/*
+ * R204 (0xCC) - Analogue Output Bias 0
+ */
+#define WM8904_PGA_BIAS_MASK 0x0070 /* PGA_BIAS - [6:4] */
+#define WM8904_PGA_BIAS_SHIFT 4 /* PGA_BIAS - [6:4] */
+#define WM8904_PGA_BIAS_WIDTH 3 /* PGA_BIAS - [6:4] */
+
+/*
+ * R247 (0xF7) - FLL NCO Test 0
+ */
+#define WM8904_FLL_FRC_NCO 0x0001 /* FLL_FRC_NCO */
+#define WM8904_FLL_FRC_NCO_MASK 0x0001 /* FLL_FRC_NCO */
+#define WM8904_FLL_FRC_NCO_SHIFT 0 /* FLL_FRC_NCO */
+#define WM8904_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */
+
+/*
+ * R248 (0xF8) - FLL NCO Test 1
+ */
+#define WM8904_FLL_FRC_NCO_VAL_MASK 0x003F /* FLL_FRC_NCO_VAL - [5:0] */
+#define WM8904_FLL_FRC_NCO_VAL_SHIFT 0 /* FLL_FRC_NCO_VAL - [5:0] */
+#define WM8904_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [5:0] */
+
+#endif
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
new file mode 100644
index 0000000..615dab2
--- /dev/null
+++ b/sound/soc/codecs/wm8955.c
@@ -0,0 +1,1151 @@
+/*
+ * wm8955.c -- WM8955 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/wm8955.h>
+
+#include "wm8955.h"
+
+static struct snd_soc_codec *wm8955_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8955;
+
+#define WM8955_NUM_SUPPLIES 4
+static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "HPVDD",
+ "AVDD",
+};
+
+/* codec private data */
+struct wm8955_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8955_MAX_REGISTER + 1];
+
+ unsigned int mclk_rate;
+
+ int deemph;
+ int fs;
+
+ struct regulator_bulk_data supplies[WM8955_NUM_SUPPLIES];
+
+ struct wm8955_pdata *pdata;
+};
+
+static const u16 wm8955_reg[WM8955_MAX_REGISTER + 1] = {
+ 0x0000, /* R0 */
+ 0x0000, /* R1 */
+ 0x0079, /* R2 - LOUT1 volume */
+ 0x0079, /* R3 - ROUT1 volume */
+ 0x0000, /* R4 */
+ 0x0008, /* R5 - DAC Control */
+ 0x0000, /* R6 */
+ 0x000A, /* R7 - Audio Interface */
+ 0x0000, /* R8 - Sample Rate */
+ 0x0000, /* R9 */
+ 0x00FF, /* R10 - Left DAC volume */
+ 0x00FF, /* R11 - Right DAC volume */
+ 0x000F, /* R12 - Bass control */
+ 0x000F, /* R13 - Treble control */
+ 0x0000, /* R14 */
+ 0x0000, /* R15 - Reset */
+ 0x0000, /* R16 */
+ 0x0000, /* R17 */
+ 0x0000, /* R18 */
+ 0x0000, /* R19 */
+ 0x0000, /* R20 */
+ 0x0000, /* R21 */
+ 0x0000, /* R22 */
+ 0x00C1, /* R23 - Additional control (1) */
+ 0x0000, /* R24 - Additional control (2) */
+ 0x0000, /* R25 - Power Management (1) */
+ 0x0000, /* R26 - Power Management (2) */
+ 0x0000, /* R27 - Additional Control (3) */
+ 0x0000, /* R28 */
+ 0x0000, /* R29 */
+ 0x0000, /* R30 */
+ 0x0000, /* R31 */
+ 0x0000, /* R32 */
+ 0x0000, /* R33 */
+ 0x0050, /* R34 - Left out Mix (1) */
+ 0x0050, /* R35 - Left out Mix (2) */
+ 0x0050, /* R36 - Right out Mix (1) */
+ 0x0050, /* R37 - Right Out Mix (2) */
+ 0x0050, /* R38 - Mono out Mix (1) */
+ 0x0050, /* R39 - Mono out Mix (2) */
+ 0x0079, /* R40 - LOUT2 volume */
+ 0x0079, /* R41 - ROUT2 volume */
+ 0x0079, /* R42 - MONOOUT volume */
+ 0x0000, /* R43 - Clocking / PLL */
+ 0x0103, /* R44 - PLL Control 1 */
+ 0x0024, /* R45 - PLL Control 2 */
+ 0x01BA, /* R46 - PLL Control 3 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 */
+ 0x0000, /* R49 */
+ 0x0000, /* R50 */
+ 0x0000, /* R51 */
+ 0x0000, /* R52 */
+ 0x0000, /* R53 */
+ 0x0000, /* R54 */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x0000, /* R58 */
+ 0x0000, /* R59 - PLL Control 4 */
+};
+
+static int wm8955_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8955_RESET, 0);
+}
+
+struct pll_factors {
+ int n;
+ int k;
+ int outdiv;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 22) * 10)
+
+static int wm8995_pll_factors(struct device *dev,
+ int Fref, int Fout, struct pll_factors *pll)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+
+ dev_dbg(dev, "Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* The oscilator should run at should be 90-100MHz, and
+ * there's a divide by 4 plus an optional divide by 2 in the
+ * output path to generate the system clock. The clock table
+ * is sortd so we should always generate a suitable target. */
+ target = Fout * 4;
+ if (target < 90000000) {
+ pll->outdiv = 1;
+ target *= 2;
+ } else {
+ pll->outdiv = 0;
+ }
+
+ WARN_ON(target < 90000000 || target > 100000000);
+
+ dev_dbg(dev, "Fvco=%dHz\n", target);
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ pll->n = Ndiv;
+ Nmod = target % Fref;
+ dev_dbg(dev, "Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ pll->k = K / 10;
+
+ dev_dbg(dev, "N=%x K=%x OUTDIV=%x\n", pll->n, pll->k, pll->outdiv);
+
+ return 0;
+}
+
+/* Lookup table specifiying SRATE (table 25 in datasheet); some of the
+ * output frequencies have been rounded to the standard frequencies
+ * they are intended to match where the error is slight. */
+static struct {
+ int mclk;
+ int fs;
+ int usb;
+ int sr;
+} clock_cfgs[] = {
+ { 18432000, 8000, 0, 3, },
+ { 18432000, 12000, 0, 9, },
+ { 18432000, 16000, 0, 11, },
+ { 18432000, 24000, 0, 29, },
+ { 18432000, 32000, 0, 13, },
+ { 18432000, 48000, 0, 1, },
+ { 18432000, 96000, 0, 15, },
+
+ { 16934400, 8018, 0, 19, },
+ { 16934400, 11025, 0, 25, },
+ { 16934400, 22050, 0, 27, },
+ { 16934400, 44100, 0, 17, },
+ { 16934400, 88200, 0, 31, },
+
+ { 12000000, 8000, 1, 2, },
+ { 12000000, 11025, 1, 25, },
+ { 12000000, 12000, 1, 8, },
+ { 12000000, 16000, 1, 10, },
+ { 12000000, 22050, 1, 27, },
+ { 12000000, 24000, 1, 28, },
+ { 12000000, 32000, 1, 12, },
+ { 12000000, 44100, 1, 17, },
+ { 12000000, 48000, 1, 0, },
+ { 12000000, 88200, 1, 31, },
+ { 12000000, 96000, 1, 14, },
+
+ { 12288000, 8000, 0, 2, },
+ { 12288000, 12000, 0, 8, },
+ { 12288000, 16000, 0, 10, },
+ { 12288000, 24000, 0, 28, },
+ { 12288000, 32000, 0, 12, },
+ { 12288000, 48000, 0, 0, },
+ { 12288000, 96000, 0, 14, },
+
+ { 12289600, 8018, 0, 18, },
+ { 12289600, 11025, 0, 24, },
+ { 12289600, 22050, 0, 26, },
+ { 11289600, 44100, 0, 16, },
+ { 11289600, 88200, 0, 31, },
+};
+
+static int wm8955_configure_clocking(struct snd_soc_codec *codec)
+{
+ struct wm8955_priv *wm8955 = codec->private_data;
+ int i, ret, val;
+ int clocking = 0;
+ int srate = 0;
+ int sr = -1;
+ struct pll_factors pll;
+
+ /* If we're not running a sample rate currently just pick one */
+ if (wm8955->fs == 0)
+ wm8955->fs = 8000;
+
+ /* Can we generate an exact output? */
+ for (i = 0; i < ARRAY_SIZE(clock_cfgs); i++) {
+ if (wm8955->fs != clock_cfgs[i].fs)
+ continue;
+ sr = i;
+
+ if (wm8955->mclk_rate == clock_cfgs[i].mclk)
+ break;
+ }
+
+ /* We should never get here with an unsupported sample rate */
+ if (sr == -1) {
+ dev_err(codec->dev, "Sample rate %dHz unsupported\n",
+ wm8955->fs);
+ WARN_ON(sr == -1);
+ return -EINVAL;
+ }
+
+ if (i == ARRAY_SIZE(clock_cfgs)) {
+ /* If we can't generate the right clock from MCLK then
+ * we should configure the PLL to supply us with an
+ * appropriate clock.
+ */
+ clocking |= WM8955_MCLKSEL;
+
+ /* Use the last divider configuration we saw for the
+ * sample rate. */
+ ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate,
+ clock_cfgs[sr].mclk, &pll);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Unable to generate %dHz from %dHz MCLK\n",
+ wm8955->fs, wm8955->mclk_rate);
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1,
+ WM8955_N_MASK | WM8955_K_21_18_MASK,
+ (pll.n << WM8955_N_SHIFT) |
+ pll.k >> 18);
+ snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+ WM8955_K_17_9_MASK,
+ (pll.k >> 9) & WM8955_K_17_9_MASK);
+ snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+ WM8955_K_8_0_MASK,
+ pll.k & WM8955_K_8_0_MASK);
+ if (pll.k)
+ snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+ WM8955_KEN, WM8955_KEN);
+ else
+ snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+ WM8955_KEN, 0);
+
+ if (pll.outdiv)
+ val = WM8955_PLL_RB | WM8955_PLLOUTDIV2;
+ else
+ val = WM8955_PLL_RB;
+
+ /* Now start the PLL running */
+ snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ WM8955_PLL_RB | WM8955_PLLOUTDIV2, val);
+ snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ WM8955_PLLEN, WM8955_PLLEN);
+ }
+
+ srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
+
+ snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+ WM8955_USB | WM8955_SR_MASK, srate);
+ snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ WM8955_MCLKSEL, clocking);
+
+ return 0;
+}
+
+static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ int ret = 0;
+
+ /* Always disable the clocks - if we're doing reconfiguration this
+ * avoids misclocking.
+ */
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_DIGENB, 0);
+ snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ WM8955_PLL_RB | WM8955_PLLEN, 0);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMD:
+ break;
+ case SND_SOC_DAPM_PRE_PMU:
+ ret = wm8955_configure_clocking(codec);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int deemph_settings[] = { 0, 32000, 44100, 48000 };
+
+static int wm8955_set_deemph(struct snd_soc_codec *codec)
+{
+ struct wm8955_priv *wm8955 = codec->private_data;
+ int val, i, best;
+
+ /* If we're using deemphasis select the nearest available sample
+ * rate.
+ */
+ if (wm8955->deemph) {
+ best = 1;
+ for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
+ if (abs(deemph_settings[i] - wm8955->fs) <
+ abs(deemph_settings[best] - wm8955->fs))
+ best = i;
+ }
+
+ val = best << WM8955_DEEMPH_SHIFT;
+ } else {
+ val = 0;
+ }
+
+ dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+
+ return snd_soc_update_bits(codec, WM8955_DAC_CONTROL,
+ WM8955_DEEMPH_MASK, val);
+}
+
+static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8955_priv *wm8955 = codec->private_data;
+
+ return wm8955->deemph;
+}
+
+static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8955_priv *wm8955 = codec->private_data;
+ int deemph = ucontrol->value.enumerated.item[0];
+
+ if (deemph > 1)
+ return -EINVAL;
+
+ wm8955->deemph = deemph;
+
+ return wm8955_set_deemph(codec);
+}
+
+static const char *bass_mode_text[] = {
+ "Linear", "Adaptive",
+};
+
+static const struct soc_enum bass_mode =
+ SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 7, 2, bass_mode_text);
+
+static const char *bass_cutoff_text[] = {
+ "Low", "High"
+};
+
+static const struct soc_enum bass_cutoff =
+ SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 6, 2, bass_cutoff_text);
+
+static const char *treble_cutoff_text[] = {
+ "High", "Low"
+};
+
+static const struct soc_enum treble_cutoff =
+ SOC_ENUM_SINGLE(WM8955_TREBLE_CONTROL, 6, 2, treble_cutoff_text);
+
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(atten_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(mono_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(treble_tlv, -1200, 150, 1);
+
+static const struct snd_kcontrol_new wm8955_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8955_LEFT_DAC_VOLUME,
+ WM8955_RIGHT_DAC_VOLUME, 0, 255, 0, digital_tlv),
+SOC_SINGLE_TLV("Playback Attenuation Volume", WM8955_DAC_CONTROL, 7, 1, 1,
+ atten_tlv),
+SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
+ wm8955_get_deemph, wm8955_put_deemph),
+
+SOC_ENUM("Bass Mode", bass_mode),
+SOC_ENUM("Bass Cutoff", bass_cutoff),
+SOC_SINGLE("Bass Volume", WM8955_BASS_CONTROL, 0, 15, 1),
+
+SOC_ENUM("Treble Cutoff", treble_cutoff),
+SOC_SINGLE_TLV("Treble Volume", WM8955_TREBLE_CONTROL, 0, 14, 1, treble_tlv),
+
+SOC_SINGLE_TLV("Left Bypass Volume", WM8955_LEFT_OUT_MIX_1, 4, 7, 1,
+ bypass_tlv),
+SOC_SINGLE_TLV("Left Mono Volume", WM8955_LEFT_OUT_MIX_2, 4, 7, 1,
+ bypass_tlv),
+
+SOC_SINGLE_TLV("Right Mono Volume", WM8955_RIGHT_OUT_MIX_1, 4, 7, 1,
+ bypass_tlv),
+SOC_SINGLE_TLV("Right Bypass Volume", WM8955_RIGHT_OUT_MIX_2, 4, 7, 1,
+ bypass_tlv),
+
+/* Not a stereo pair so they line up with the DAPM switches */
+SOC_SINGLE_TLV("Mono Left Bypass Volume", WM8955_MONO_OUT_MIX_1, 4, 7, 1,
+ mono_tlv),
+SOC_SINGLE_TLV("Mono Right Bypass Volume", WM8955_MONO_OUT_MIX_2, 4, 7, 1,
+ mono_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8955_LOUT1_VOLUME,
+ WM8955_ROUT1_VOLUME, 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8955_LOUT1_VOLUME,
+ WM8955_ROUT1_VOLUME, 7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Volume", WM8955_LOUT2_VOLUME,
+ WM8955_ROUT2_VOLUME, 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker ZC Switch", WM8955_LOUT2_VOLUME,
+ WM8955_ROUT2_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("Mono Volume", WM8955_MONOOUT_VOLUME, 0, 127, 0, out_tlv),
+SOC_SINGLE("Mono ZC Switch", WM8955_MONOOUT_VOLUME, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new lmixer[] = {
+SOC_DAPM_SINGLE("Playback Switch", WM8955_LEFT_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8955_LEFT_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8955_LEFT_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Mono Switch", WM8955_LEFT_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new rmixer[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8955_RIGHT_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Mono Switch", WM8955_RIGHT_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM8955_RIGHT_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8955_RIGHT_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new mmixer[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8955_MONO_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8955_MONO_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8955_MONO_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8955_MONO_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8955_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("MONOIN-"),
+SND_SOC_DAPM_INPUT("MONOIN+"),
+SND_SOC_DAPM_INPUT("LINEINR"),
+SND_SOC_DAPM_INPUT("LINEINL"),
+
+SND_SOC_DAPM_PGA("Mono Input", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_SUPPLY("SYSCLK", WM8955_POWER_MANAGEMENT_1, 0, 1, wm8955_sysclk,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TSDEN", WM8955_ADDITIONAL_CONTROL_1, 8, 0, NULL, 0),
+
+SND_SOC_DAPM_DAC("DACL", "Playback", WM8955_POWER_MANAGEMENT_2, 8, 0),
+SND_SOC_DAPM_DAC("DACR", "Playback", WM8955_POWER_MANAGEMENT_2, 7, 0),
+
+SND_SOC_DAPM_PGA("LOUT1 PGA", WM8955_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT1 PGA", WM8955_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LOUT2 PGA", WM8955_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT2 PGA", WM8955_POWER_MANAGEMENT_2, 3, 0, NULL, 0),
+SND_SOC_DAPM_PGA("MOUT PGA", WM8955_POWER_MANAGEMENT_2, 2, 0, NULL, 0),
+SND_SOC_DAPM_PGA("OUT3 PGA", WM8955_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
+
+/* The names are chosen to make the control names nice */
+SND_SOC_DAPM_MIXER("Left", SND_SOC_NOPM, 0, 0,
+ lmixer, ARRAY_SIZE(lmixer)),
+SND_SOC_DAPM_MIXER("Right", SND_SOC_NOPM, 0, 0,
+ rmixer, ARRAY_SIZE(rmixer)),
+SND_SOC_DAPM_MIXER("Mono", SND_SOC_NOPM, 0, 0,
+ mmixer, ARRAY_SIZE(mmixer)),
+
+SND_SOC_DAPM_OUTPUT("LOUT1"),
+SND_SOC_DAPM_OUTPUT("ROUT1"),
+SND_SOC_DAPM_OUTPUT("LOUT2"),
+SND_SOC_DAPM_OUTPUT("ROUT2"),
+SND_SOC_DAPM_OUTPUT("MONOOUT"),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route wm8955_intercon[] = {
+ { "DACL", NULL, "SYSCLK" },
+ { "DACR", NULL, "SYSCLK" },
+
+ { "Mono Input", NULL, "MONOIN-" },
+ { "Mono Input", NULL, "MONOIN+" },
+
+ { "Left", "Playback Switch", "DACL" },
+ { "Left", "Right Playback Switch", "DACR" },
+ { "Left", "Bypass Switch", "LINEINL" },
+ { "Left", "Mono Switch", "Mono Input" },
+
+ { "Right", "Playback Switch", "DACR" },
+ { "Right", "Left Playback Switch", "DACL" },
+ { "Right", "Bypass Switch", "LINEINR" },
+ { "Right", "Mono Switch", "Mono Input" },
+
+ { "Mono", "Left Playback Switch", "DACL" },
+ { "Mono", "Right Playback Switch", "DACR" },
+ { "Mono", "Left Bypass Switch", "LINEINL" },
+ { "Mono", "Right Bypass Switch", "LINEINR" },
+
+ { "LOUT1 PGA", NULL, "Left" },
+ { "LOUT1", NULL, "TSDEN" },
+ { "LOUT1", NULL, "LOUT1 PGA" },
+
+ { "ROUT1 PGA", NULL, "Right" },
+ { "ROUT1", NULL, "TSDEN" },
+ { "ROUT1", NULL, "ROUT1 PGA" },
+
+ { "LOUT2 PGA", NULL, "Left" },
+ { "LOUT2", NULL, "TSDEN" },
+ { "LOUT2", NULL, "LOUT2 PGA" },
+
+ { "ROUT2 PGA", NULL, "Right" },
+ { "ROUT2", NULL, "TSDEN" },
+ { "ROUT2", NULL, "ROUT2 PGA" },
+
+ { "MOUT PGA", NULL, "Mono" },
+ { "MONOOUT", NULL, "MOUT PGA" },
+
+ /* OUT3 not currently implemented */
+ { "OUT3", NULL, "OUT3 PGA" },
+};
+
+static int wm8955_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_add_controls(codec, wm8955_snd_controls,
+ ARRAY_SIZE(wm8955_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, wm8955_dapm_widgets,
+ ARRAY_SIZE(wm8955_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, wm8955_intercon,
+ ARRAY_SIZE(wm8955_intercon));
+
+ return 0;
+}
+
+static int wm8955_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8955_priv *wm8955 = codec->private_data;
+ int ret;
+ int wl;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wl = 0;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wl = 0x4;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wl = 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wl = 0xc;
+ break;
+ default:
+ return -EINVAL;
+ }
+ snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+ WM8955_WL_MASK, wl);
+
+ wm8955->fs = params_rate(params);
+ wm8955_set_deemph(codec);
+
+ /* If the chip is clocked then disable the clocks and force a
+ * reconfiguration, otherwise DAPM will power up the
+ * clocks for us later. */
+ ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1);
+ if (ret < 0)
+ return ret;
+ if (ret & WM8955_DIGENB) {
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_DIGENB, 0);
+ snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+ WM8955_PLL_RB | WM8955_PLLEN, 0);
+
+ wm8955_configure_clocking(codec);
+ }
+
+ return 0;
+}
+
+
+static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8955_priv *priv = codec->private_data;
+ int div;
+
+ switch (clk_id) {
+ case WM8955_CLK_MCLK:
+ if (freq > 15000000) {
+ priv->mclk_rate = freq /= 2;
+ div = WM8955_MCLKDIV2;
+ } else {
+ priv->mclk_rate = freq;
+ div = 0;
+ }
+
+ snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+ WM8955_MCLKDIV2, div);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
+
+ return 0;
+}
+
+static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 aif = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif |= WM8955_MS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif |= WM8955_LRP;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif |= 0x3;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif |= 0x2;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif |= 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8955_BCLKINV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif |= WM8955_BCLKINV | WM8955_LRP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8955_BCLKINV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif |= WM8955_LRP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+ WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV |
+ WM8955_LRP, aif);
+
+ return 0;
+}
+
+
+static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int val;
+
+ if (mute)
+ val = WM8955_DACMU;
+ else
+ val = 0;
+
+ snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val);
+
+ return 0;
+}
+
+static int wm8955_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8955_priv *wm8955 = codec->private_data;
+ int ret, i;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID resistance 2*50k */
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_VMIDSEL_MASK,
+ 0x1 << WM8955_VMIDSEL_SHIFT);
+
+ /* Default bias current */
+ snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+ WM8955_VSEL_MASK,
+ 0x2 << WM8955_VSEL_SHIFT);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
+ wm8955->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* Sync back cached values if they're
+ * different from the hardware default.
+ */
+ for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+ if (i == WM8955_RESET)
+ continue;
+
+ if (wm8955->reg_cache[i] == wm8955_reg[i])
+ continue;
+
+ snd_soc_write(codec, i, wm8955->reg_cache[i]);
+ }
+
+ /* Enable VREF and VMID */
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_VREF |
+ WM8955_VMIDSEL_MASK,
+ WM8955_VREF |
+ 0x3 << WM8955_VREF_SHIFT);
+
+ /* Let VMID ramp */
+ msleep(500);
+
+ /* High resistance VROI to maintain outputs */
+ snd_soc_update_bits(codec,
+ WM8955_ADDITIONAL_CONTROL_3,
+ WM8955_VROI, WM8955_VROI);
+ }
+
+ /* Maintain VMID with 2*250k */
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_VMIDSEL_MASK,
+ 0x2 << WM8955_VMIDSEL_SHIFT);
+
+ /* Minimum bias current */
+ snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+ WM8955_VSEL_MASK, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Low resistance VROI to help discharge */
+ snd_soc_update_bits(codec,
+ WM8955_ADDITIONAL_CONTROL_3,
+ WM8955_VROI, 0);
+
+ /* Turn off VMID and VREF */
+ snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+ WM8955_VREF |
+ WM8955_VMIDSEL_MASK, 0);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies),
+ wm8955->supplies);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8955_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8955_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8955_dai_ops = {
+ .set_sysclk = wm8955_set_sysclk,
+ .set_fmt = wm8955_set_fmt,
+ .hw_params = wm8955_hw_params,
+ .digital_mute = wm8955_digital_mute,
+};
+
+struct snd_soc_dai wm8955_dai = {
+ .name = "WM8955",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8955_RATES,
+ .formats = WM8955_FORMATS,
+ },
+ .ops = &wm8955_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8955_dai);
+
+#ifdef CONFIG_PM
+static int wm8955_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8955_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8955_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8955_suspend NULL
+#define wm8955_resume NULL
+#endif
+
+static int wm8955_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8955_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8955_codec;
+ codec = wm8955_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ wm8955_add_widgets(codec);
+
+ return ret;
+
+pcm_err:
+ return ret;
+}
+
+static int wm8955_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8955 = {
+ .probe = wm8955_probe,
+ .remove = wm8955_remove,
+ .suspend = wm8955_suspend,
+ .resume = wm8955_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8955);
+
+static int wm8955_register(struct wm8955_priv *wm8955,
+ enum snd_soc_control_type control)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8955->codec;
+ int i;
+
+ if (wm8955_codec) {
+ dev_err(codec->dev, "Another WM8955 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8955;
+ codec->name = "WM8955";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8955_set_bias_level;
+ codec->dai = &wm8955_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8955_MAX_REGISTER;
+ codec->reg_cache = &wm8955->reg_cache;
+
+ memcpy(codec->reg_cache, wm8955_reg, sizeof(wm8955_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++)
+ wm8955->supplies[i].supply = wm8955_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies),
+ wm8955->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
+ wm8955->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = wm8955_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ goto err_enable;
+ }
+
+ wm8955_dai.dev = codec->dev;
+
+ /* Change some default settings - latch VU and enable ZC */
+ wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+ wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+ wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+ wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+ wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+ wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+ wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+
+ /* Also enable adaptive bass boost by default */
+ wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+
+ /* Set platform data values */
+ if (wm8955->pdata) {
+ if (wm8955->pdata->out2_speaker)
+ wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+ |= WM8955_ROUT2INV;
+
+ if (wm8955->pdata->monoin_diff)
+ wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+ |= WM8955_DMEN;
+ }
+
+ wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Bias level configuration will have done an extra enable */
+ regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+
+ wm8955_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8955_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+err:
+ kfree(wm8955);
+ return ret;
+}
+
+static void wm8955_unregister(struct wm8955_priv *wm8955)
+{
+ wm8955_set_bias_level(&wm8955->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+ snd_soc_unregister_dai(&wm8955_dai);
+ snd_soc_unregister_codec(&wm8955->codec);
+ kfree(wm8955);
+ wm8955_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8955_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8955_priv *wm8955;
+ struct snd_soc_codec *codec;
+
+ wm8955 = kzalloc(sizeof(struct wm8955_priv), GFP_KERNEL);
+ if (wm8955 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8955->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8955);
+ codec->control_data = i2c;
+ wm8955->pdata = i2c->dev.platform_data;
+
+ codec->dev = &i2c->dev;
+
+ return wm8955_register(wm8955, SND_SOC_I2C);
+}
+
+static __devexit int wm8955_i2c_remove(struct i2c_client *client)
+{
+ struct wm8955_priv *wm8955 = i2c_get_clientdata(client);
+ wm8955_unregister(wm8955);
+ return 0;
+}
+
+static const struct i2c_device_id wm8955_i2c_id[] = {
+ { "wm8955", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8955_i2c_id);
+
+static struct i2c_driver wm8955_i2c_driver = {
+ .driver = {
+ .name = "wm8955",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8955_i2c_probe,
+ .remove = __devexit_p(wm8955_i2c_remove),
+ .id_table = wm8955_i2c_id,
+};
+#endif
+
+static int __init wm8955_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8955_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8955 I2C driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8955_modinit);
+
+static void __exit wm8955_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8955_i2c_driver);
+#endif
+}
+module_exit(wm8955_exit);
+
+MODULE_DESCRIPTION("ASoC WM8955 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8955.h b/sound/soc/codecs/wm8955.h
new file mode 100644
index 0000000..ae349c8
--- /dev/null
+++ b/sound/soc/codecs/wm8955.h
@@ -0,0 +1,489 @@
+/*
+ * wm8955.h -- WM8904 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics, plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8955_H
+#define _WM8955_H
+
+#define WM8955_CLK_MCLK 1
+
+extern struct snd_soc_dai wm8955_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8955;
+
+/*
+ * Register values.
+ */
+#define WM8955_LOUT1_VOLUME 0x02
+#define WM8955_ROUT1_VOLUME 0x03
+#define WM8955_DAC_CONTROL 0x05
+#define WM8955_AUDIO_INTERFACE 0x07
+#define WM8955_SAMPLE_RATE 0x08
+#define WM8955_LEFT_DAC_VOLUME 0x0A
+#define WM8955_RIGHT_DAC_VOLUME 0x0B
+#define WM8955_BASS_CONTROL 0x0C
+#define WM8955_TREBLE_CONTROL 0x0D
+#define WM8955_RESET 0x0F
+#define WM8955_ADDITIONAL_CONTROL_1 0x17
+#define WM8955_ADDITIONAL_CONTROL_2 0x18
+#define WM8955_POWER_MANAGEMENT_1 0x19
+#define WM8955_POWER_MANAGEMENT_2 0x1A
+#define WM8955_ADDITIONAL_CONTROL_3 0x1B
+#define WM8955_LEFT_OUT_MIX_1 0x22
+#define WM8955_LEFT_OUT_MIX_2 0x23
+#define WM8955_RIGHT_OUT_MIX_1 0x24
+#define WM8955_RIGHT_OUT_MIX_2 0x25
+#define WM8955_MONO_OUT_MIX_1 0x26
+#define WM8955_MONO_OUT_MIX_2 0x27
+#define WM8955_LOUT2_VOLUME 0x28
+#define WM8955_ROUT2_VOLUME 0x29
+#define WM8955_MONOOUT_VOLUME 0x2A
+#define WM8955_CLOCKING_PLL 0x2B
+#define WM8955_PLL_CONTROL_1 0x2C
+#define WM8955_PLL_CONTROL_2 0x2D
+#define WM8955_PLL_CONTROL_3 0x2E
+#define WM8955_PLL_CONTROL_4 0x3B
+
+#define WM8955_REGISTER_COUNT 29
+#define WM8955_MAX_REGISTER 0x3B
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R2 (0x02) - LOUT1 volume
+ */
+#define WM8955_LO1VU 0x0100 /* LO1VU */
+#define WM8955_LO1VU_MASK 0x0100 /* LO1VU */
+#define WM8955_LO1VU_SHIFT 8 /* LO1VU */
+#define WM8955_LO1VU_WIDTH 1 /* LO1VU */
+#define WM8955_LO1ZC 0x0080 /* LO1ZC */
+#define WM8955_LO1ZC_MASK 0x0080 /* LO1ZC */
+#define WM8955_LO1ZC_SHIFT 7 /* LO1ZC */
+#define WM8955_LO1ZC_WIDTH 1 /* LO1ZC */
+#define WM8955_LOUTVOL_MASK 0x007F /* LOUTVOL - [6:0] */
+#define WM8955_LOUTVOL_SHIFT 0 /* LOUTVOL - [6:0] */
+#define WM8955_LOUTVOL_WIDTH 7 /* LOUTVOL - [6:0] */
+
+/*
+ * R3 (0x03) - ROUT1 volume
+ */
+#define WM8955_RO1VU 0x0100 /* RO1VU */
+#define WM8955_RO1VU_MASK 0x0100 /* RO1VU */
+#define WM8955_RO1VU_SHIFT 8 /* RO1VU */
+#define WM8955_RO1VU_WIDTH 1 /* RO1VU */
+#define WM8955_RO1ZC 0x0080 /* RO1ZC */
+#define WM8955_RO1ZC_MASK 0x0080 /* RO1ZC */
+#define WM8955_RO1ZC_SHIFT 7 /* RO1ZC */
+#define WM8955_RO1ZC_WIDTH 1 /* RO1ZC */
+#define WM8955_ROUTVOL_MASK 0x007F /* ROUTVOL - [6:0] */
+#define WM8955_ROUTVOL_SHIFT 0 /* ROUTVOL - [6:0] */
+#define WM8955_ROUTVOL_WIDTH 7 /* ROUTVOL - [6:0] */
+
+/*
+ * R5 (0x05) - DAC Control
+ */
+#define WM8955_DAT 0x0080 /* DAT */
+#define WM8955_DAT_MASK 0x0080 /* DAT */
+#define WM8955_DAT_SHIFT 7 /* DAT */
+#define WM8955_DAT_WIDTH 1 /* DAT */
+#define WM8955_DACMU 0x0008 /* DACMU */
+#define WM8955_DACMU_MASK 0x0008 /* DACMU */
+#define WM8955_DACMU_SHIFT 3 /* DACMU */
+#define WM8955_DACMU_WIDTH 1 /* DACMU */
+#define WM8955_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */
+#define WM8955_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */
+#define WM8955_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */
+
+/*
+ * R7 (0x07) - Audio Interface
+ */
+#define WM8955_BCLKINV 0x0080 /* BCLKINV */
+#define WM8955_BCLKINV_MASK 0x0080 /* BCLKINV */
+#define WM8955_BCLKINV_SHIFT 7 /* BCLKINV */
+#define WM8955_BCLKINV_WIDTH 1 /* BCLKINV */
+#define WM8955_MS 0x0040 /* MS */
+#define WM8955_MS_MASK 0x0040 /* MS */
+#define WM8955_MS_SHIFT 6 /* MS */
+#define WM8955_MS_WIDTH 1 /* MS */
+#define WM8955_LRSWAP 0x0020 /* LRSWAP */
+#define WM8955_LRSWAP_MASK 0x0020 /* LRSWAP */
+#define WM8955_LRSWAP_SHIFT 5 /* LRSWAP */
+#define WM8955_LRSWAP_WIDTH 1 /* LRSWAP */
+#define WM8955_LRP 0x0010 /* LRP */
+#define WM8955_LRP_MASK 0x0010 /* LRP */
+#define WM8955_LRP_SHIFT 4 /* LRP */
+#define WM8955_LRP_WIDTH 1 /* LRP */
+#define WM8955_WL_MASK 0x000C /* WL - [3:2] */
+#define WM8955_WL_SHIFT 2 /* WL - [3:2] */
+#define WM8955_WL_WIDTH 2 /* WL - [3:2] */
+#define WM8955_FORMAT_MASK 0x0003 /* FORMAT - [1:0] */
+#define WM8955_FORMAT_SHIFT 0 /* FORMAT - [1:0] */
+#define WM8955_FORMAT_WIDTH 2 /* FORMAT - [1:0] */
+
+/*
+ * R8 (0x08) - Sample Rate
+ */
+#define WM8955_BCLKDIV2 0x0080 /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_MASK 0x0080 /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_SHIFT 7 /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_WIDTH 1 /* BCLKDIV2 */
+#define WM8955_MCLKDIV2 0x0040 /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_MASK 0x0040 /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_SHIFT 6 /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_WIDTH 1 /* MCLKDIV2 */
+#define WM8955_SR_MASK 0x003E /* SR - [5:1] */
+#define WM8955_SR_SHIFT 1 /* SR - [5:1] */
+#define WM8955_SR_WIDTH 5 /* SR - [5:1] */
+#define WM8955_USB 0x0001 /* USB */
+#define WM8955_USB_MASK 0x0001 /* USB */
+#define WM8955_USB_SHIFT 0 /* USB */
+#define WM8955_USB_WIDTH 1 /* USB */
+
+/*
+ * R10 (0x0A) - Left DAC volume
+ */
+#define WM8955_LDVU 0x0100 /* LDVU */
+#define WM8955_LDVU_MASK 0x0100 /* LDVU */
+#define WM8955_LDVU_SHIFT 8 /* LDVU */
+#define WM8955_LDVU_WIDTH 1 /* LDVU */
+#define WM8955_LDACVOL_MASK 0x00FF /* LDACVOL - [7:0] */
+#define WM8955_LDACVOL_SHIFT 0 /* LDACVOL - [7:0] */
+#define WM8955_LDACVOL_WIDTH 8 /* LDACVOL - [7:0] */
+
+/*
+ * R11 (0x0B) - Right DAC volume
+ */
+#define WM8955_RDVU 0x0100 /* RDVU */
+#define WM8955_RDVU_MASK 0x0100 /* RDVU */
+#define WM8955_RDVU_SHIFT 8 /* RDVU */
+#define WM8955_RDVU_WIDTH 1 /* RDVU */
+#define WM8955_RDACVOL_MASK 0x00FF /* RDACVOL - [7:0] */
+#define WM8955_RDACVOL_SHIFT 0 /* RDACVOL - [7:0] */
+#define WM8955_RDACVOL_WIDTH 8 /* RDACVOL - [7:0] */
+
+/*
+ * R12 (0x0C) - Bass control
+ */
+#define WM8955_BB 0x0080 /* BB */
+#define WM8955_BB_MASK 0x0080 /* BB */
+#define WM8955_BB_SHIFT 7 /* BB */
+#define WM8955_BB_WIDTH 1 /* BB */
+#define WM8955_BC 0x0040 /* BC */
+#define WM8955_BC_MASK 0x0040 /* BC */
+#define WM8955_BC_SHIFT 6 /* BC */
+#define WM8955_BC_WIDTH 1 /* BC */
+#define WM8955_BASS_MASK 0x000F /* BASS - [3:0] */
+#define WM8955_BASS_SHIFT 0 /* BASS - [3:0] */
+#define WM8955_BASS_WIDTH 4 /* BASS - [3:0] */
+
+/*
+ * R13 (0x0D) - Treble control
+ */
+#define WM8955_TC 0x0040 /* TC */
+#define WM8955_TC_MASK 0x0040 /* TC */
+#define WM8955_TC_SHIFT 6 /* TC */
+#define WM8955_TC_WIDTH 1 /* TC */
+#define WM8955_TRBL_MASK 0x000F /* TRBL - [3:0] */
+#define WM8955_TRBL_SHIFT 0 /* TRBL - [3:0] */
+#define WM8955_TRBL_WIDTH 4 /* TRBL - [3:0] */
+
+/*
+ * R15 (0x0F) - Reset
+ */
+#define WM8955_RESET_MASK 0x01FF /* RESET - [8:0] */
+#define WM8955_RESET_SHIFT 0 /* RESET - [8:0] */
+#define WM8955_RESET_WIDTH 9 /* RESET - [8:0] */
+
+/*
+ * R23 (0x17) - Additional control (1)
+ */
+#define WM8955_TSDEN 0x0100 /* TSDEN */
+#define WM8955_TSDEN_MASK 0x0100 /* TSDEN */
+#define WM8955_TSDEN_SHIFT 8 /* TSDEN */
+#define WM8955_TSDEN_WIDTH 1 /* TSDEN */
+#define WM8955_VSEL_MASK 0x00C0 /* VSEL - [7:6] */
+#define WM8955_VSEL_SHIFT 6 /* VSEL - [7:6] */
+#define WM8955_VSEL_WIDTH 2 /* VSEL - [7:6] */
+#define WM8955_DMONOMIX_MASK 0x0030 /* DMONOMIX - [5:4] */
+#define WM8955_DMONOMIX_SHIFT 4 /* DMONOMIX - [5:4] */
+#define WM8955_DMONOMIX_WIDTH 2 /* DMONOMIX - [5:4] */
+#define WM8955_DACINV 0x0002 /* DACINV */
+#define WM8955_DACINV_MASK 0x0002 /* DACINV */
+#define WM8955_DACINV_SHIFT 1 /* DACINV */
+#define WM8955_DACINV_WIDTH 1 /* DACINV */
+#define WM8955_TOEN 0x0001 /* TOEN */
+#define WM8955_TOEN_MASK 0x0001 /* TOEN */
+#define WM8955_TOEN_SHIFT 0 /* TOEN */
+#define WM8955_TOEN_WIDTH 1 /* TOEN */
+
+/*
+ * R24 (0x18) - Additional control (2)
+ */
+#define WM8955_OUT3SW_MASK 0x0180 /* OUT3SW - [8:7] */
+#define WM8955_OUT3SW_SHIFT 7 /* OUT3SW - [8:7] */
+#define WM8955_OUT3SW_WIDTH 2 /* OUT3SW - [8:7] */
+#define WM8955_ROUT2INV 0x0010 /* ROUT2INV */
+#define WM8955_ROUT2INV_MASK 0x0010 /* ROUT2INV */
+#define WM8955_ROUT2INV_SHIFT 4 /* ROUT2INV */
+#define WM8955_ROUT2INV_WIDTH 1 /* ROUT2INV */
+#define WM8955_DACOSR 0x0001 /* DACOSR */
+#define WM8955_DACOSR_MASK 0x0001 /* DACOSR */
+#define WM8955_DACOSR_SHIFT 0 /* DACOSR */
+#define WM8955_DACOSR_WIDTH 1 /* DACOSR */
+
+/*
+ * R25 (0x19) - Power Management (1)
+ */
+#define WM8955_VMIDSEL_MASK 0x0180 /* VMIDSEL - [8:7] */
+#define WM8955_VMIDSEL_SHIFT 7 /* VMIDSEL - [8:7] */
+#define WM8955_VMIDSEL_WIDTH 2 /* VMIDSEL - [8:7] */
+#define WM8955_VREF 0x0040 /* VREF */
+#define WM8955_VREF_MASK 0x0040 /* VREF */
+#define WM8955_VREF_SHIFT 6 /* VREF */
+#define WM8955_VREF_WIDTH 1 /* VREF */
+#define WM8955_DIGENB 0x0001 /* DIGENB */
+#define WM8955_DIGENB_MASK 0x0001 /* DIGENB */
+#define WM8955_DIGENB_SHIFT 0 /* DIGENB */
+#define WM8955_DIGENB_WIDTH 1 /* DIGENB */
+
+/*
+ * R26 (0x1A) - Power Management (2)
+ */
+#define WM8955_DACL 0x0100 /* DACL */
+#define WM8955_DACL_MASK 0x0100 /* DACL */
+#define WM8955_DACL_SHIFT 8 /* DACL */
+#define WM8955_DACL_WIDTH 1 /* DACL */
+#define WM8955_DACR 0x0080 /* DACR */
+#define WM8955_DACR_MASK 0x0080 /* DACR */
+#define WM8955_DACR_SHIFT 7 /* DACR */
+#define WM8955_DACR_WIDTH 1 /* DACR */
+#define WM8955_LOUT1 0x0040 /* LOUT1 */
+#define WM8955_LOUT1_MASK 0x0040 /* LOUT1 */
+#define WM8955_LOUT1_SHIFT 6 /* LOUT1 */
+#define WM8955_LOUT1_WIDTH 1 /* LOUT1 */
+#define WM8955_ROUT1 0x0020 /* ROUT1 */
+#define WM8955_ROUT1_MASK 0x0020 /* ROUT1 */
+#define WM8955_ROUT1_SHIFT 5 /* ROUT1 */
+#define WM8955_ROUT1_WIDTH 1 /* ROUT1 */
+#define WM8955_LOUT2 0x0010 /* LOUT2 */
+#define WM8955_LOUT2_MASK 0x0010 /* LOUT2 */
+#define WM8955_LOUT2_SHIFT 4 /* LOUT2 */
+#define WM8955_LOUT2_WIDTH 1 /* LOUT2 */
+#define WM8955_ROUT2 0x0008 /* ROUT2 */
+#define WM8955_ROUT2_MASK 0x0008 /* ROUT2 */
+#define WM8955_ROUT2_SHIFT 3 /* ROUT2 */
+#define WM8955_ROUT2_WIDTH 1 /* ROUT2 */
+#define WM8955_MONO 0x0004 /* MONO */
+#define WM8955_MONO_MASK 0x0004 /* MONO */
+#define WM8955_MONO_SHIFT 2 /* MONO */
+#define WM8955_MONO_WIDTH 1 /* MONO */
+#define WM8955_OUT3 0x0002 /* OUT3 */
+#define WM8955_OUT3_MASK 0x0002 /* OUT3 */
+#define WM8955_OUT3_SHIFT 1 /* OUT3 */
+#define WM8955_OUT3_WIDTH 1 /* OUT3 */
+
+/*
+ * R27 (0x1B) - Additional Control (3)
+ */
+#define WM8955_VROI 0x0040 /* VROI */
+#define WM8955_VROI_MASK 0x0040 /* VROI */
+#define WM8955_VROI_SHIFT 6 /* VROI */
+#define WM8955_VROI_WIDTH 1 /* VROI */
+
+/*
+ * R34 (0x22) - Left out Mix (1)
+ */
+#define WM8955_LD2LO 0x0100 /* LD2LO */
+#define WM8955_LD2LO_MASK 0x0100 /* LD2LO */
+#define WM8955_LD2LO_SHIFT 8 /* LD2LO */
+#define WM8955_LD2LO_WIDTH 1 /* LD2LO */
+#define WM8955_LI2LO 0x0080 /* LI2LO */
+#define WM8955_LI2LO_MASK 0x0080 /* LI2LO */
+#define WM8955_LI2LO_SHIFT 7 /* LI2LO */
+#define WM8955_LI2LO_WIDTH 1 /* LI2LO */
+#define WM8955_LI2LOVOL_MASK 0x0070 /* LI2LOVOL - [6:4] */
+#define WM8955_LI2LOVOL_SHIFT 4 /* LI2LOVOL - [6:4] */
+#define WM8955_LI2LOVOL_WIDTH 3 /* LI2LOVOL - [6:4] */
+
+/*
+ * R35 (0x23) - Left out Mix (2)
+ */
+#define WM8955_RD2LO 0x0100 /* RD2LO */
+#define WM8955_RD2LO_MASK 0x0100 /* RD2LO */
+#define WM8955_RD2LO_SHIFT 8 /* RD2LO */
+#define WM8955_RD2LO_WIDTH 1 /* RD2LO */
+#define WM8955_RI2LO 0x0080 /* RI2LO */
+#define WM8955_RI2LO_MASK 0x0080 /* RI2LO */
+#define WM8955_RI2LO_SHIFT 7 /* RI2LO */
+#define WM8955_RI2LO_WIDTH 1 /* RI2LO */
+#define WM8955_RI2LOVOL_MASK 0x0070 /* RI2LOVOL - [6:4] */
+#define WM8955_RI2LOVOL_SHIFT 4 /* RI2LOVOL - [6:4] */
+#define WM8955_RI2LOVOL_WIDTH 3 /* RI2LOVOL - [6:4] */
+
+/*
+ * R36 (0x24) - Right out Mix (1)
+ */
+#define WM8955_LD2RO 0x0100 /* LD2RO */
+#define WM8955_LD2RO_MASK 0x0100 /* LD2RO */
+#define WM8955_LD2RO_SHIFT 8 /* LD2RO */
+#define WM8955_LD2RO_WIDTH 1 /* LD2RO */
+#define WM8955_LI2RO 0x0080 /* LI2RO */
+#define WM8955_LI2RO_MASK 0x0080 /* LI2RO */
+#define WM8955_LI2RO_SHIFT 7 /* LI2RO */
+#define WM8955_LI2RO_WIDTH 1 /* LI2RO */
+#define WM8955_LI2ROVOL_MASK 0x0070 /* LI2ROVOL - [6:4] */
+#define WM8955_LI2ROVOL_SHIFT 4 /* LI2ROVOL - [6:4] */
+#define WM8955_LI2ROVOL_WIDTH 3 /* LI2ROVOL - [6:4] */
+
+/*
+ * R37 (0x25) - Right Out Mix (2)
+ */
+#define WM8955_RD2RO 0x0100 /* RD2RO */
+#define WM8955_RD2RO_MASK 0x0100 /* RD2RO */
+#define WM8955_RD2RO_SHIFT 8 /* RD2RO */
+#define WM8955_RD2RO_WIDTH 1 /* RD2RO */
+#define WM8955_RI2RO 0x0080 /* RI2RO */
+#define WM8955_RI2RO_MASK 0x0080 /* RI2RO */
+#define WM8955_RI2RO_SHIFT 7 /* RI2RO */
+#define WM8955_RI2RO_WIDTH 1 /* RI2RO */
+#define WM8955_RI2ROVOL_MASK 0x0070 /* RI2ROVOL - [6:4] */
+#define WM8955_RI2ROVOL_SHIFT 4 /* RI2ROVOL - [6:4] */
+#define WM8955_RI2ROVOL_WIDTH 3 /* RI2ROVOL - [6:4] */
+
+/*
+ * R38 (0x26) - Mono out Mix (1)
+ */
+#define WM8955_LD2MO 0x0100 /* LD2MO */
+#define WM8955_LD2MO_MASK 0x0100 /* LD2MO */
+#define WM8955_LD2MO_SHIFT 8 /* LD2MO */
+#define WM8955_LD2MO_WIDTH 1 /* LD2MO */
+#define WM8955_LI2MO 0x0080 /* LI2MO */
+#define WM8955_LI2MO_MASK 0x0080 /* LI2MO */
+#define WM8955_LI2MO_SHIFT 7 /* LI2MO */
+#define WM8955_LI2MO_WIDTH 1 /* LI2MO */
+#define WM8955_LI2MOVOL_MASK 0x0070 /* LI2MOVOL - [6:4] */
+#define WM8955_LI2MOVOL_SHIFT 4 /* LI2MOVOL - [6:4] */
+#define WM8955_LI2MOVOL_WIDTH 3 /* LI2MOVOL - [6:4] */
+#define WM8955_DMEN 0x0001 /* DMEN */
+#define WM8955_DMEN_MASK 0x0001 /* DMEN */
+#define WM8955_DMEN_SHIFT 0 /* DMEN */
+#define WM8955_DMEN_WIDTH 1 /* DMEN */
+
+/*
+ * R39 (0x27) - Mono out Mix (2)
+ */
+#define WM8955_RD2MO 0x0100 /* RD2MO */
+#define WM8955_RD2MO_MASK 0x0100 /* RD2MO */
+#define WM8955_RD2MO_SHIFT 8 /* RD2MO */
+#define WM8955_RD2MO_WIDTH 1 /* RD2MO */
+#define WM8955_RI2MO 0x0080 /* RI2MO */
+#define WM8955_RI2MO_MASK 0x0080 /* RI2MO */
+#define WM8955_RI2MO_SHIFT 7 /* RI2MO */
+#define WM8955_RI2MO_WIDTH 1 /* RI2MO */
+#define WM8955_RI2MOVOL_MASK 0x0070 /* RI2MOVOL - [6:4] */
+#define WM8955_RI2MOVOL_SHIFT 4 /* RI2MOVOL - [6:4] */
+#define WM8955_RI2MOVOL_WIDTH 3 /* RI2MOVOL - [6:4] */
+
+/*
+ * R40 (0x28) - LOUT2 volume
+ */
+#define WM8955_LO2VU 0x0100 /* LO2VU */
+#define WM8955_LO2VU_MASK 0x0100 /* LO2VU */
+#define WM8955_LO2VU_SHIFT 8 /* LO2VU */
+#define WM8955_LO2VU_WIDTH 1 /* LO2VU */
+#define WM8955_LO2ZC 0x0080 /* LO2ZC */
+#define WM8955_LO2ZC_MASK 0x0080 /* LO2ZC */
+#define WM8955_LO2ZC_SHIFT 7 /* LO2ZC */
+#define WM8955_LO2ZC_WIDTH 1 /* LO2ZC */
+#define WM8955_LOUT2VOL_MASK 0x007F /* LOUT2VOL - [6:0] */
+#define WM8955_LOUT2VOL_SHIFT 0 /* LOUT2VOL - [6:0] */
+#define WM8955_LOUT2VOL_WIDTH 7 /* LOUT2VOL - [6:0] */
+
+/*
+ * R41 (0x29) - ROUT2 volume
+ */
+#define WM8955_RO2VU 0x0100 /* RO2VU */
+#define WM8955_RO2VU_MASK 0x0100 /* RO2VU */
+#define WM8955_RO2VU_SHIFT 8 /* RO2VU */
+#define WM8955_RO2VU_WIDTH 1 /* RO2VU */
+#define WM8955_RO2ZC 0x0080 /* RO2ZC */
+#define WM8955_RO2ZC_MASK 0x0080 /* RO2ZC */
+#define WM8955_RO2ZC_SHIFT 7 /* RO2ZC */
+#define WM8955_RO2ZC_WIDTH 1 /* RO2ZC */
+#define WM8955_ROUT2VOL_MASK 0x007F /* ROUT2VOL - [6:0] */
+#define WM8955_ROUT2VOL_SHIFT 0 /* ROUT2VOL - [6:0] */
+#define WM8955_ROUT2VOL_WIDTH 7 /* ROUT2VOL - [6:0] */
+
+/*
+ * R42 (0x2A) - MONOOUT volume
+ */
+#define WM8955_MOZC 0x0080 /* MOZC */
+#define WM8955_MOZC_MASK 0x0080 /* MOZC */
+#define WM8955_MOZC_SHIFT 7 /* MOZC */
+#define WM8955_MOZC_WIDTH 1 /* MOZC */
+#define WM8955_MOUTVOL_MASK 0x007F /* MOUTVOL - [6:0] */
+#define WM8955_MOUTVOL_SHIFT 0 /* MOUTVOL - [6:0] */
+#define WM8955_MOUTVOL_WIDTH 7 /* MOUTVOL - [6:0] */
+
+/*
+ * R43 (0x2B) - Clocking / PLL
+ */
+#define WM8955_MCLKSEL 0x0100 /* MCLKSEL */
+#define WM8955_MCLKSEL_MASK 0x0100 /* MCLKSEL */
+#define WM8955_MCLKSEL_SHIFT 8 /* MCLKSEL */
+#define WM8955_MCLKSEL_WIDTH 1 /* MCLKSEL */
+#define WM8955_PLLOUTDIV2 0x0020 /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_MASK 0x0020 /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_SHIFT 5 /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_WIDTH 1 /* PLLOUTDIV2 */
+#define WM8955_PLL_RB 0x0010 /* PLL_RB */
+#define WM8955_PLL_RB_MASK 0x0010 /* PLL_RB */
+#define WM8955_PLL_RB_SHIFT 4 /* PLL_RB */
+#define WM8955_PLL_RB_WIDTH 1 /* PLL_RB */
+#define WM8955_PLLEN 0x0008 /* PLLEN */
+#define WM8955_PLLEN_MASK 0x0008 /* PLLEN */
+#define WM8955_PLLEN_SHIFT 3 /* PLLEN */
+#define WM8955_PLLEN_WIDTH 1 /* PLLEN */
+
+/*
+ * R44 (0x2C) - PLL Control 1
+ */
+#define WM8955_N_MASK 0x01E0 /* N - [8:5] */
+#define WM8955_N_SHIFT 5 /* N - [8:5] */
+#define WM8955_N_WIDTH 4 /* N - [8:5] */
+#define WM8955_K_21_18_MASK 0x000F /* K(21:18) - [3:0] */
+#define WM8955_K_21_18_SHIFT 0 /* K(21:18) - [3:0] */
+#define WM8955_K_21_18_WIDTH 4 /* K(21:18) - [3:0] */
+
+/*
+ * R45 (0x2D) - PLL Control 2
+ */
+#define WM8955_K_17_9_MASK 0x01FF /* K(17:9) - [8:0] */
+#define WM8955_K_17_9_SHIFT 0 /* K(17:9) - [8:0] */
+#define WM8955_K_17_9_WIDTH 9 /* K(17:9) - [8:0] */
+
+/*
+ * R46 (0x2E) - PLL Control 3
+ */
+#define WM8955_K_8_0_MASK 0x01FF /* K(8:0) - [8:0] */
+#define WM8955_K_8_0_SHIFT 0 /* K(8:0) - [8:0] */
+#define WM8955_K_8_0_WIDTH 9 /* K(8:0) - [8:0] */
+
+/*
+ * R59 (0x3B) - PLL Control 4
+ */
+#define WM8955_KEN 0x0080 /* KEN */
+#define WM8955_KEN_MASK 0x0080 /* KEN */
+#define WM8955_KEN_SHIFT 7 /* KEN */
+#define WM8955_KEN_WIDTH 1 /* KEN */
+
+#endif
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index a8007d5..d2342c5 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -1022,6 +1022,9 @@
int i;
for (i = 0; i < codec->reg_cache_size; i++) {
+ if (reg_cache[i] == wm8961_reg_defaults[i])
+ continue;
+
if (i == WM8961_SOFTWARE_RESET)
continue;
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index 8812751..ee637af 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -170,6 +170,10 @@
SOC_SINGLE("Capture Boost(+20dB)", WM8974_ADCBOOST, 8, 1, 0),
SOC_SINGLE("Mono Playback Switch", WM8974_MONOMIX, 6, 1, 1),
+
+/* DAC / ADC oversampling */
+SOC_SINGLE("DAC 128x Oversampling Switch", WM8974_DAC, 8, 1, 0),
+SOC_SINGLE("ADC 128x Oversampling Switch", WM8974_ADC, 8, 1, 0),
};
/* Speaker Output Mixer */
@@ -381,14 +385,6 @@
reg = snd_soc_read(codec, WM8974_CLOCK) & 0x11f;
snd_soc_write(codec, WM8974_CLOCK, reg | div);
break;
- case WM8974_ADCCLK:
- reg = snd_soc_read(codec, WM8974_ADC) & 0x1f7;
- snd_soc_write(codec, WM8974_ADC, reg | div);
- break;
- case WM8974_DACCLK:
- reg = snd_soc_read(codec, WM8974_DAC) & 0x1f7;
- snd_soc_write(codec, WM8974_DAC, reg | div);
- break;
case WM8974_BCLKDIV:
reg = snd_soc_read(codec, WM8974_CLOCK) & 0x1e3;
snd_soc_write(codec, WM8974_CLOCK, reg | div);
diff --git a/sound/soc/codecs/wm8974.h b/sound/soc/codecs/wm8974.h
index 98de956..896a7f0 100644
--- a/sound/soc/codecs/wm8974.h
+++ b/sound/soc/codecs/wm8974.h
@@ -57,17 +57,7 @@
/* Clock divider Id's */
#define WM8974_OPCLKDIV 0
#define WM8974_MCLKDIV 1
-#define WM8974_ADCCLK 2
-#define WM8974_DACCLK 3
-#define WM8974_BCLKDIV 4
-
-/* DAC clock dividers */
-#define WM8974_DACCLK_F2 (1 << 3)
-#define WM8974_DACCLK_F4 (0 << 3)
-
-/* ADC clock dividers */
-#define WM8974_ADCCLK_F2 (1 << 3)
-#define WM8974_ADCCLK_F4 (0 << 3)
+#define WM8974_BCLKDIV 2
/* PLL Out dividers */
#define WM8974_OPCLKDIV_1 (0 << 4)
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
new file mode 100644
index 0000000..28bb59e
--- /dev/null
+++ b/sound/soc/codecs/wm8978.c
@@ -0,0 +1,1149 @@
+/*
+ * wm8978.c -- WM8978 ALSA SoC Audio Codec driver
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2007 Carlos Munoz <carlos@kenati.com>
+ * Copyright 2006-2009 Wolfson Microelectronics PLC.
+ * Based on wm8974 and wm8990 by Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <asm/div64.h>
+
+#include "wm8978.h"
+
+static struct snd_soc_codec *wm8978_codec;
+
+/* wm8978 register cache. Note that register 0 is not included in the cache. */
+static const u16 wm8978_reg[WM8978_CACHEREGNUM] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 0x00...0x03 */
+ 0x0050, 0x0000, 0x0140, 0x0000, /* 0x04...0x07 */
+ 0x0000, 0x0000, 0x0000, 0x00ff, /* 0x08...0x0b */
+ 0x00ff, 0x0000, 0x0100, 0x00ff, /* 0x0c...0x0f */
+ 0x00ff, 0x0000, 0x012c, 0x002c, /* 0x10...0x13 */
+ 0x002c, 0x002c, 0x002c, 0x0000, /* 0x14...0x17 */
+ 0x0032, 0x0000, 0x0000, 0x0000, /* 0x18...0x1b */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 0x1c...0x1f */
+ 0x0038, 0x000b, 0x0032, 0x0000, /* 0x20...0x23 */
+ 0x0008, 0x000c, 0x0093, 0x00e9, /* 0x24...0x27 */
+ 0x0000, 0x0000, 0x0000, 0x0000, /* 0x28...0x2b */
+ 0x0033, 0x0010, 0x0010, 0x0100, /* 0x2c...0x2f */
+ 0x0100, 0x0002, 0x0001, 0x0001, /* 0x30...0x33 */
+ 0x0039, 0x0039, 0x0039, 0x0039, /* 0x34...0x37 */
+ 0x0001, 0x0001, /* 0x38...0x3b */
+};
+
+/* codec private data */
+struct wm8978_priv {
+ struct snd_soc_codec codec;
+ unsigned int f_pllout;
+ unsigned int f_mclk;
+ unsigned int f_256fs;
+ unsigned int f_opclk;
+ int mclk_idx;
+ enum wm8978_sysclk_src sysclk;
+ u16 reg_cache[WM8978_CACHEREGNUM];
+};
+
+static const char *wm8978_companding[] = {"Off", "NC", "u-law", "A-law"};
+static const char *wm8978_eqmode[] = {"Capture", "Playback"};
+static const char *wm8978_bw[] = {"Narrow", "Wide"};
+static const char *wm8978_eq1[] = {"80Hz", "105Hz", "135Hz", "175Hz"};
+static const char *wm8978_eq2[] = {"230Hz", "300Hz", "385Hz", "500Hz"};
+static const char *wm8978_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz"};
+static const char *wm8978_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"};
+static const char *wm8978_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz"};
+static const char *wm8978_alc3[] = {"ALC", "Limiter"};
+static const char *wm8978_alc1[] = {"Off", "Right", "Left", "Both"};
+
+static const SOC_ENUM_SINGLE_DECL(adc_compand, WM8978_COMPANDING_CONTROL, 1,
+ wm8978_companding);
+static const SOC_ENUM_SINGLE_DECL(dac_compand, WM8978_COMPANDING_CONTROL, 3,
+ wm8978_companding);
+static const SOC_ENUM_SINGLE_DECL(eqmode, WM8978_EQ1, 8, wm8978_eqmode);
+static const SOC_ENUM_SINGLE_DECL(eq1, WM8978_EQ1, 5, wm8978_eq1);
+static const SOC_ENUM_SINGLE_DECL(eq2bw, WM8978_EQ2, 8, wm8978_bw);
+static const SOC_ENUM_SINGLE_DECL(eq2, WM8978_EQ2, 5, wm8978_eq2);
+static const SOC_ENUM_SINGLE_DECL(eq3bw, WM8978_EQ3, 8, wm8978_bw);
+static const SOC_ENUM_SINGLE_DECL(eq3, WM8978_EQ3, 5, wm8978_eq3);
+static const SOC_ENUM_SINGLE_DECL(eq4bw, WM8978_EQ4, 8, wm8978_bw);
+static const SOC_ENUM_SINGLE_DECL(eq4, WM8978_EQ4, 5, wm8978_eq4);
+static const SOC_ENUM_SINGLE_DECL(eq5, WM8978_EQ5, 5, wm8978_eq5);
+static const SOC_ENUM_SINGLE_DECL(alc3, WM8978_ALC_CONTROL_3, 8, wm8978_alc3);
+static const SOC_ENUM_SINGLE_DECL(alc1, WM8978_ALC_CONTROL_1, 7, wm8978_alc1);
+
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
+static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1);
+
+static const struct snd_kcontrol_new wm8978_snd_controls[] = {
+
+ SOC_SINGLE("Digital Loopback Switch",
+ WM8978_COMPANDING_CONTROL, 0, 1, 0),
+
+ SOC_ENUM("ADC Companding", adc_compand),
+ SOC_ENUM("DAC Companding", dac_compand),
+
+ SOC_DOUBLE("DAC Inversion Switch", WM8978_DAC_CONTROL, 0, 1, 1, 0),
+
+ SOC_DOUBLE_R_TLV("PCM Volume",
+ WM8978_LEFT_DAC_DIGITAL_VOLUME, WM8978_RIGHT_DAC_DIGITAL_VOLUME,
+ 0, 255, 0, digital_tlv),
+
+ SOC_SINGLE("High Pass Filter Switch", WM8978_ADC_CONTROL, 8, 1, 0),
+ SOC_SINGLE("High Pass Cut Off", WM8978_ADC_CONTROL, 4, 7, 0),
+ SOC_DOUBLE("ADC Inversion Switch", WM8978_ADC_CONTROL, 0, 1, 1, 0),
+
+ SOC_DOUBLE_R_TLV("ADC Volume",
+ WM8978_LEFT_ADC_DIGITAL_VOLUME, WM8978_RIGHT_ADC_DIGITAL_VOLUME,
+ 0, 255, 0, digital_tlv),
+
+ SOC_ENUM("Equaliser Function", eqmode),
+ SOC_ENUM("EQ1 Cut Off", eq1),
+ SOC_SINGLE_TLV("EQ1 Volume", WM8978_EQ1, 0, 24, 1, eq_tlv),
+
+ SOC_ENUM("Equaliser EQ2 Bandwith", eq2bw),
+ SOC_ENUM("EQ2 Cut Off", eq2),
+ SOC_SINGLE_TLV("EQ2 Volume", WM8978_EQ2, 0, 24, 1, eq_tlv),
+
+ SOC_ENUM("Equaliser EQ3 Bandwith", eq3bw),
+ SOC_ENUM("EQ3 Cut Off", eq3),
+ SOC_SINGLE_TLV("EQ3 Volume", WM8978_EQ3, 0, 24, 1, eq_tlv),
+
+ SOC_ENUM("Equaliser EQ4 Bandwith", eq4bw),
+ SOC_ENUM("EQ4 Cut Off", eq4),
+ SOC_SINGLE_TLV("EQ4 Volume", WM8978_EQ4, 0, 24, 1, eq_tlv),
+
+ SOC_ENUM("EQ5 Cut Off", eq5),
+ SOC_SINGLE_TLV("EQ5 Volume", WM8978_EQ5, 0, 24, 1, eq_tlv),
+
+ SOC_SINGLE("DAC Playback Limiter Switch",
+ WM8978_DAC_LIMITER_1, 8, 1, 0),
+ SOC_SINGLE("DAC Playback Limiter Decay",
+ WM8978_DAC_LIMITER_1, 4, 15, 0),
+ SOC_SINGLE("DAC Playback Limiter Attack",
+ WM8978_DAC_LIMITER_1, 0, 15, 0),
+
+ SOC_SINGLE("DAC Playback Limiter Threshold",
+ WM8978_DAC_LIMITER_2, 4, 7, 0),
+ SOC_SINGLE("DAC Playback Limiter Boost",
+ WM8978_DAC_LIMITER_2, 0, 15, 0),
+
+ SOC_ENUM("ALC Enable Switch", alc1),
+ SOC_SINGLE("ALC Capture Min Gain", WM8978_ALC_CONTROL_1, 0, 7, 0),
+ SOC_SINGLE("ALC Capture Max Gain", WM8978_ALC_CONTROL_1, 3, 7, 0),
+
+ SOC_SINGLE("ALC Capture Hold", WM8978_ALC_CONTROL_2, 4, 7, 0),
+ SOC_SINGLE("ALC Capture Target", WM8978_ALC_CONTROL_2, 0, 15, 0),
+
+ SOC_ENUM("ALC Capture Mode", alc3),
+ SOC_SINGLE("ALC Capture Decay", WM8978_ALC_CONTROL_3, 4, 15, 0),
+ SOC_SINGLE("ALC Capture Attack", WM8978_ALC_CONTROL_3, 0, 15, 0),
+
+ SOC_SINGLE("ALC Capture Noise Gate Switch", WM8978_NOISE_GATE, 3, 1, 0),
+ SOC_SINGLE("ALC Capture Noise Gate Threshold",
+ WM8978_NOISE_GATE, 0, 7, 0),
+
+ SOC_DOUBLE_R("Capture PGA ZC Switch",
+ WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
+ 7, 1, 0),
+
+ /* OUT1 - Headphones */
+ SOC_DOUBLE_R("Headphone Playback ZC Switch",
+ WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 7, 1, 0),
+
+ SOC_DOUBLE_R_TLV("Headphone Playback Volume",
+ WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL,
+ 0, 63, 0, spk_tlv),
+
+ /* OUT2 - Speakers */
+ SOC_DOUBLE_R("Speaker Playback ZC Switch",
+ WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 7, 1, 0),
+
+ SOC_DOUBLE_R_TLV("Speaker Playback Volume",
+ WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL,
+ 0, 63, 0, spk_tlv),
+
+ /* OUT3/4 - Line Output */
+ SOC_DOUBLE_R("Line Playback Switch",
+ WM8978_OUT3_MIXER_CONTROL, WM8978_OUT4_MIXER_CONTROL, 6, 1, 1),
+
+ /* Mixer #3: Boost (Input) mixer */
+ SOC_DOUBLE_R("PGA Boost (+20dB)",
+ WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
+ 8, 1, 0),
+ SOC_DOUBLE_R_TLV("L2/R2 Boost Volume",
+ WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
+ 4, 7, 0, boost_tlv),
+ SOC_DOUBLE_R_TLV("Aux Boost Volume",
+ WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
+ 0, 7, 0, boost_tlv),
+
+ /* Input PGA volume */
+ SOC_DOUBLE_R_TLV("Input PGA Volume",
+ WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
+ 0, 63, 0, inpga_tlv),
+
+ /* Headphone */
+ SOC_DOUBLE_R("Headphone Switch",
+ WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 6, 1, 1),
+
+ /* Speaker */
+ SOC_DOUBLE_R("Speaker Switch",
+ WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 6, 1, 1),
+
+ /* DAC / ADC oversampling */
+ SOC_SINGLE("DAC 128x Oversampling Switch", WM8978_DAC_CONTROL, 8, 1, 0),
+ SOC_SINGLE("ADC 128x Oversampling Switch", WM8978_ADC_CONTROL, 8, 1, 0),
+};
+
+/* Mixer #1: Output (OUT1, OUT2) Mixer: mix AUX, Input mixer output and DAC */
+static const struct snd_kcontrol_new wm8978_left_out_mixer[] = {
+ SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_LEFT_MIXER_CONTROL, 1, 1, 0),
+ SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_LEFT_MIXER_CONTROL, 5, 1, 0),
+ SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_LEFT_MIXER_CONTROL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8978_right_out_mixer[] = {
+ SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_RIGHT_MIXER_CONTROL, 1, 1, 0),
+ SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 5, 1, 0),
+ SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 0, 1, 0),
+};
+
+/* OUT3/OUT4 Mixer not implemented */
+
+/* Mixer #2: Input PGA Mute */
+static const struct snd_kcontrol_new wm8978_left_input_mixer[] = {
+ SOC_DAPM_SINGLE("L2 Switch", WM8978_INPUT_CONTROL, 2, 1, 0),
+ SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 1, 1, 0),
+ SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 0, 1, 0),
+};
+static const struct snd_kcontrol_new wm8978_right_input_mixer[] = {
+ SOC_DAPM_SINGLE("R2 Switch", WM8978_INPUT_CONTROL, 6, 1, 0),
+ SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 5, 1, 0),
+ SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 4, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8978_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback",
+ WM8978_POWER_MANAGEMENT_3, 0, 0),
+ SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback",
+ WM8978_POWER_MANAGEMENT_3, 1, 0),
+ SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture",
+ WM8978_POWER_MANAGEMENT_2, 0, 0),
+ SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture",
+ WM8978_POWER_MANAGEMENT_2, 1, 0),
+
+ /* Mixer #1: OUT1,2 */
+ SOC_MIXER_ARRAY("Left Output Mixer", WM8978_POWER_MANAGEMENT_3,
+ 2, 0, wm8978_left_out_mixer),
+ SOC_MIXER_ARRAY("Right Output Mixer", WM8978_POWER_MANAGEMENT_3,
+ 3, 0, wm8978_right_out_mixer),
+
+ SOC_MIXER_ARRAY("Left Input Mixer", WM8978_POWER_MANAGEMENT_2,
+ 2, 0, wm8978_left_input_mixer),
+ SOC_MIXER_ARRAY("Right Input Mixer", WM8978_POWER_MANAGEMENT_2,
+ 3, 0, wm8978_right_input_mixer),
+
+ SND_SOC_DAPM_PGA("Left Boost Mixer", WM8978_POWER_MANAGEMENT_2,
+ 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Right Boost Mixer", WM8978_POWER_MANAGEMENT_2,
+ 5, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("Left Capture PGA", WM8978_LEFT_INP_PGA_CONTROL,
+ 6, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("Right Capture PGA", WM8978_RIGHT_INP_PGA_CONTROL,
+ 6, 1, NULL, 0),
+
+ SND_SOC_DAPM_PGA("Left Headphone Out", WM8978_POWER_MANAGEMENT_2,
+ 7, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Right Headphone Out", WM8978_POWER_MANAGEMENT_2,
+ 8, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("Left Speaker Out", WM8978_POWER_MANAGEMENT_3,
+ 6, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Right Speaker Out", WM8978_POWER_MANAGEMENT_3,
+ 5, 0, NULL, 0),
+
+ SND_SOC_DAPM_MIXER("OUT4 VMID", WM8978_POWER_MANAGEMENT_3,
+ 8, 0, NULL, 0),
+
+ SND_SOC_DAPM_MICBIAS("Mic Bias", WM8978_POWER_MANAGEMENT_1, 4, 0),
+
+ SND_SOC_DAPM_INPUT("LMICN"),
+ SND_SOC_DAPM_INPUT("LMICP"),
+ SND_SOC_DAPM_INPUT("RMICN"),
+ SND_SOC_DAPM_INPUT("RMICP"),
+ SND_SOC_DAPM_INPUT("LAUX"),
+ SND_SOC_DAPM_INPUT("RAUX"),
+ SND_SOC_DAPM_INPUT("L2"),
+ SND_SOC_DAPM_INPUT("R2"),
+ SND_SOC_DAPM_OUTPUT("LHP"),
+ SND_SOC_DAPM_OUTPUT("RHP"),
+ SND_SOC_DAPM_OUTPUT("LSPK"),
+ SND_SOC_DAPM_OUTPUT("RSPK"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Output mixer */
+ {"Right Output Mixer", "PCM Playback Switch", "Right DAC"},
+ {"Right Output Mixer", "Aux Playback Switch", "RAUX"},
+ {"Right Output Mixer", "Line Bypass Switch", "Right Boost Mixer"},
+
+ {"Left Output Mixer", "PCM Playback Switch", "Left DAC"},
+ {"Left Output Mixer", "Aux Playback Switch", "LAUX"},
+ {"Left Output Mixer", "Line Bypass Switch", "Left Boost Mixer"},
+
+ /* Outputs */
+ {"Right Headphone Out", NULL, "Right Output Mixer"},
+ {"RHP", NULL, "Right Headphone Out"},
+
+ {"Left Headphone Out", NULL, "Left Output Mixer"},
+ {"LHP", NULL, "Left Headphone Out"},
+
+ {"Right Speaker Out", NULL, "Right Output Mixer"},
+ {"RSPK", NULL, "Right Speaker Out"},
+
+ {"Left Speaker Out", NULL, "Left Output Mixer"},
+ {"LSPK", NULL, "Left Speaker Out"},
+
+ /* Boost Mixer */
+ {"Right ADC", NULL, "Right Boost Mixer"},
+
+ {"Right Boost Mixer", NULL, "RAUX"},
+ {"Right Boost Mixer", NULL, "Right Capture PGA"},
+ {"Right Boost Mixer", NULL, "R2"},
+
+ {"Left ADC", NULL, "Left Boost Mixer"},
+
+ {"Left Boost Mixer", NULL, "LAUX"},
+ {"Left Boost Mixer", NULL, "Left Capture PGA"},
+ {"Left Boost Mixer", NULL, "L2"},
+
+ /* Input PGA */
+ {"Right Capture PGA", NULL, "Right Input Mixer"},
+ {"Left Capture PGA", NULL, "Left Input Mixer"},
+
+ {"Right Input Mixer", "R2 Switch", "R2"},
+ {"Right Input Mixer", "MicN Switch", "RMICN"},
+ {"Right Input Mixer", "MicP Switch", "RMICP"},
+
+ {"Left Input Mixer", "L2 Switch", "L2"},
+ {"Left Input Mixer", "MicN Switch", "LMICN"},
+ {"Left Input Mixer", "MicP Switch", "LMICP"},
+};
+
+static int wm8978_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8978_dapm_widgets,
+ ARRAY_SIZE(wm8978_dapm_widgets));
+
+ /* set up the WM8978 audio map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ return 0;
+}
+
+/* PLL divisors */
+struct wm8978_pll_div {
+ u32 k;
+ u8 n;
+ u8 div2;
+};
+
+#define FIXED_PLL_SIZE (1 << 24)
+
+static void pll_factors(struct wm8978_pll_div *pll_div, unsigned int target,
+ unsigned int source)
+{
+ u64 k_part;
+ unsigned int k, n_div, n_mod;
+
+ n_div = target / source;
+ if (n_div < 6) {
+ source >>= 1;
+ pll_div->div2 = 1;
+ n_div = target / source;
+ } else {
+ pll_div->div2 = 0;
+ }
+
+ if (n_div < 6 || n_div > 12)
+ dev_warn(wm8978_codec->dev,
+ "WM8978 N value exceeds recommended range! N = %u\n",
+ n_div);
+
+ pll_div->n = n_div;
+ n_mod = target - source * n_div;
+ k_part = FIXED_PLL_SIZE * (long long)n_mod + source / 2;
+
+ do_div(k_part, source);
+
+ k = k_part & 0xFFFFFFFF;
+
+ pll_div->k = k;
+}
+
+/* MCLK dividers */
+static const int mclk_numerator[] = {1, 3, 2, 3, 4, 6, 8, 12};
+static const int mclk_denominator[] = {1, 2, 1, 1, 1, 1, 1, 1};
+
+/*
+ * find index >= idx, such that, for a given f_out,
+ * 3 * f_mclk / 4 <= f_PLLOUT < 13 * f_mclk / 4
+ * f_out can be f_256fs or f_opclk, currently only used for f_256fs. Can be
+ * generalised for f_opclk with suitable coefficient arrays, but currently
+ * the OPCLK divisor is calculated directly, not iteratively.
+ */
+static int wm8978_enum_mclk(unsigned int f_out, unsigned int f_mclk,
+ unsigned int *f_pllout)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
+ unsigned int f_pllout_x4 = 4 * f_out * mclk_numerator[i] /
+ mclk_denominator[i];
+ if (3 * f_mclk <= f_pllout_x4 && f_pllout_x4 < 13 * f_mclk) {
+ *f_pllout = f_pllout_x4 / 4;
+ return i;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * Calculate internal frequencies and dividers, according to Figure 40
+ * "PLL and Clock Select Circuit" in WM8978 datasheet Rev. 2.6
+ */
+static int wm8978_configure_pll(struct snd_soc_codec *codec)
+{
+ struct wm8978_priv *wm8978 = codec->private_data;
+ struct wm8978_pll_div pll_div;
+ unsigned int f_opclk = wm8978->f_opclk, f_mclk = wm8978->f_mclk,
+ f_256fs = wm8978->f_256fs;
+ unsigned int f2;
+
+ if (!f_mclk)
+ return -EINVAL;
+
+ if (f_opclk) {
+ unsigned int opclk_div;
+ /* Cannot set up MCLK divider now, do later */
+ wm8978->mclk_idx = -1;
+
+ /*
+ * The user needs OPCLK. Choose OPCLKDIV to put
+ * 6 <= R = f2 / f1 < 13, 1 <= OPCLKDIV <= 4.
+ * f_opclk = f_mclk * prescale * R / 4 / OPCLKDIV, where
+ * prescale = 1, or prescale = 2. Prescale is calculated inside
+ * pll_factors(). We have to select f_PLLOUT, such that
+ * f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
+ * f_mclk * 3 / 16 <= f_opclk < f_mclk * 13 / 4.
+ */
+ if (16 * f_opclk < 3 * f_mclk || 4 * f_opclk >= 13 * f_mclk)
+ return -EINVAL;
+
+ if (4 * f_opclk < 3 * f_mclk)
+ /* Have to use OPCLKDIV */
+ opclk_div = (3 * f_mclk / 4 + f_opclk - 1) / f_opclk;
+ else
+ opclk_div = 1;
+
+ dev_dbg(codec->dev, "%s: OPCLKDIV=%d\n", __func__, opclk_div);
+
+ snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 0x30,
+ (opclk_div - 1) << 4);
+
+ wm8978->f_pllout = f_opclk * opclk_div;
+ } else if (f_256fs) {
+ /*
+ * Not using OPCLK, but PLL is used for the codec, choose R:
+ * 6 <= R = f2 / f1 < 13, to put 1 <= MCLKDIV <= 12.
+ * f_256fs = f_mclk * prescale * R / 4 / MCLKDIV, where
+ * prescale = 1, or prescale = 2. Prescale is calculated inside
+ * pll_factors(). We have to select f_PLLOUT, such that
+ * f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
+ * f_mclk * 3 / 48 <= f_256fs < f_mclk * 13 / 4. This means MCLK
+ * must be 3.781MHz <= f_MCLK <= 32.768MHz
+ */
+ int idx = wm8978_enum_mclk(f_256fs, f_mclk, &wm8978->f_pllout);
+ if (idx < 0)
+ return idx;
+
+ wm8978->mclk_idx = idx;
+
+ /* GPIO1 into default mode as input - before configuring PLL */
+ snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 7, 0);
+ } else {
+ return -EINVAL;
+ }
+
+ f2 = wm8978->f_pllout * 4;
+
+ dev_dbg(codec->dev, "%s: f_MCLK=%uHz, f_PLLOUT=%uHz\n", __func__,
+ wm8978->f_mclk, wm8978->f_pllout);
+
+ pll_factors(&pll_div, f2, wm8978->f_mclk);
+
+ dev_dbg(codec->dev, "%s: calculated PLL N=0x%x, K=0x%x, div2=%d\n",
+ __func__, pll_div.n, pll_div.k, pll_div.div2);
+
+ /* Turn PLL off for configuration... */
+ snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
+
+ snd_soc_write(codec, WM8978_PLL_N, (pll_div.div2 << 4) | pll_div.n);
+ snd_soc_write(codec, WM8978_PLL_K1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8978_PLL_K2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8978_PLL_K3, pll_div.k & 0x1ff);
+
+ /* ...and on again */
+ snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
+
+ if (f_opclk)
+ /* Output PLL (OPCLK) to GPIO1 */
+ snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 7, 4);
+
+ return 0;
+}
+
+/*
+ * Configure WM8978 clock dividers.
+ */
+static int wm8978_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+ int div_id, int div)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8978_priv *wm8978 = codec->private_data;
+ int ret = 0;
+
+ switch (div_id) {
+ case WM8978_OPCLKRATE:
+ wm8978->f_opclk = div;
+
+ if (wm8978->f_mclk)
+ /*
+ * We know the MCLK frequency, the user has requested
+ * OPCLK, configure the PLL based on that and start it
+ * and OPCLK immediately. We will configure PLL to match
+ * user-requested OPCLK frquency as good as possible.
+ * In fact, it is likely, that matching the sampling
+ * rate, when it becomes known, is more important, and
+ * we will not be reconfiguring PLL then, because we
+ * must not interrupt OPCLK. But it should be fine,
+ * because typically the user will request OPCLK to run
+ * at 256fs or 512fs, and for these cases we will also
+ * find an exact MCLK divider configuration - it will
+ * be equal to or double the OPCLK divisor.
+ */
+ ret = wm8978_configure_pll(codec);
+ break;
+ case WM8978_BCLKDIV:
+ if (div & ~0x1c)
+ return -EINVAL;
+ snd_soc_update_bits(codec, WM8978_CLOCKING, 0x1c, div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "%s: ID %d, value %u\n", __func__, div_id, div);
+
+ return ret;
+}
+
+/*
+ * @freq: when .set_pll() us not used, freq is codec MCLK input frequency
+ */
+static int wm8978_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8978_priv *wm8978 = codec->private_data;
+ int ret = 0;
+
+ dev_dbg(codec->dev, "%s: ID %d, freq %u\n", __func__, clk_id, freq);
+
+ if (freq) {
+ wm8978->f_mclk = freq;
+
+ /* Even if MCLK is used for system clock, might have to drive OPCLK */
+ if (wm8978->f_opclk)
+ ret = wm8978_configure_pll(codec);
+
+ /* Our sysclk is fixed to 256 * fs, will configure in .hw_params() */
+
+ if (!ret)
+ wm8978->sysclk = clk_id;
+ }
+
+ if (wm8978->sysclk == WM8978_PLL && (!freq || clk_id == WM8978_MCLK)) {
+ /* Clock CODEC directly from MCLK */
+ snd_soc_update_bits(codec, WM8978_CLOCKING, 0x100, 0);
+
+ /* GPIO1 into default mode as input - before configuring PLL */
+ snd_soc_update_bits(codec, WM8978_GPIO_CONTROL, 7, 0);
+
+ /* Turn off PLL */
+ snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
+ wm8978->sysclk = WM8978_MCLK;
+ wm8978->f_pllout = 0;
+ wm8978->f_opclk = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * Set ADC and Voice DAC format.
+ */
+static int wm8978_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ /*
+ * BCLK polarity mask = 0x100, LRC clock polarity mask = 0x80,
+ * Data Format mask = 0x18: all will be calculated anew
+ */
+ u16 iface = snd_soc_read(codec, WM8978_AUDIO_INTERFACE) & ~0x198;
+ u16 clk = snd_soc_read(codec, WM8978_CLOCKING);
+
+ dev_dbg(codec->dev, "%s\n", __func__);
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ clk |= 1;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ clk &= ~1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x8;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x18;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x180;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x100;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, WM8978_AUDIO_INTERFACE, iface);
+ snd_soc_write(codec, WM8978_CLOCKING, clk);
+
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ */
+static int wm8978_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8978_priv *wm8978 = codec->private_data;
+ /* Word length mask = 0x60 */
+ u16 iface_ctl = snd_soc_read(codec, WM8978_AUDIO_INTERFACE) & ~0x60;
+ /* Sampling rate mask = 0xe (for filters) */
+ u16 add_ctl = snd_soc_read(codec, WM8978_ADDITIONAL_CONTROL) & ~0xe;
+ u16 clking = snd_soc_read(codec, WM8978_CLOCKING);
+ enum wm8978_sysclk_src current_clk_id = clking & 0x100 ?
+ WM8978_PLL : WM8978_MCLK;
+ unsigned int f_sel, diff, diff_best = INT_MAX;
+ int i, best = 0;
+
+ if (!wm8978->f_mclk)
+ return -EINVAL;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface_ctl |= 0x20;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface_ctl |= 0x40;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface_ctl |= 0x60;
+ break;
+ }
+
+ /* filter coefficient */
+ switch (params_rate(params)) {
+ case 8000:
+ add_ctl |= 0x5 << 1;
+ break;
+ case 11025:
+ add_ctl |= 0x4 << 1;
+ break;
+ case 16000:
+ add_ctl |= 0x3 << 1;
+ break;
+ case 22050:
+ add_ctl |= 0x2 << 1;
+ break;
+ case 32000:
+ add_ctl |= 0x1 << 1;
+ break;
+ case 44100:
+ case 48000:
+ break;
+ }
+
+ /* Sampling rate is known now, can configure the MCLK divider */
+ wm8978->f_256fs = params_rate(params) * 256;
+
+ if (wm8978->sysclk == WM8978_MCLK) {
+ wm8978->mclk_idx = -1;
+ f_sel = wm8978->f_mclk;
+ } else {
+ if (!wm8978->f_pllout) {
+ /* We only enter here, if OPCLK is not used */
+ int ret = wm8978_configure_pll(codec);
+ if (ret < 0)
+ return ret;
+ }
+ f_sel = wm8978->f_pllout;
+ }
+
+ if (wm8978->mclk_idx < 0) {
+ /* Either MCLK is used directly, or OPCLK is used */
+ if (f_sel < wm8978->f_256fs || f_sel > 12 * wm8978->f_256fs)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
+ diff = abs(wm8978->f_256fs * 3 -
+ f_sel * 3 * mclk_denominator[i] / mclk_numerator[i]);
+
+ if (diff < diff_best) {
+ diff_best = diff;
+ best = i;
+ }
+
+ if (!diff)
+ break;
+ }
+ } else {
+ /* OPCLK not used, codec driven by PLL */
+ best = wm8978->mclk_idx;
+ diff = 0;
+ }
+
+ if (diff)
+ dev_warn(codec->dev, "Imprecise sampling rate: %uHz%s\n",
+ f_sel * mclk_denominator[best] / mclk_numerator[best] / 256,
+ wm8978->sysclk == WM8978_MCLK ?
+ ", consider using PLL" : "");
+
+ dev_dbg(codec->dev, "%s: fmt %d, rate %u, MCLK divisor #%d\n", __func__,
+ params_format(params), params_rate(params), best);
+
+ /* MCLK divisor mask = 0xe0 */
+ snd_soc_update_bits(codec, WM8978_CLOCKING, 0xe0, best << 5);
+
+ snd_soc_write(codec, WM8978_AUDIO_INTERFACE, iface_ctl);
+ snd_soc_write(codec, WM8978_ADDITIONAL_CONTROL, add_ctl);
+
+ if (wm8978->sysclk != current_clk_id) {
+ if (wm8978->sysclk == WM8978_PLL)
+ /* Run CODEC from PLL instead of MCLK */
+ snd_soc_update_bits(codec, WM8978_CLOCKING,
+ 0x100, 0x100);
+ else
+ /* Clock CODEC directly from MCLK */
+ snd_soc_update_bits(codec, WM8978_CLOCKING, 0x100, 0);
+ }
+
+ return 0;
+}
+
+static int wm8978_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ dev_dbg(codec->dev, "%s: %d\n", __func__, mute);
+
+ if (mute)
+ snd_soc_update_bits(codec, WM8978_DAC_CONTROL, 0x40, 0x40);
+ else
+ snd_soc_update_bits(codec, WM8978_DAC_CONTROL, 0x40, 0);
+
+ return 0;
+}
+
+static int wm8978_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 power1 = snd_soc_read(codec, WM8978_POWER_MANAGEMENT_1) & ~3;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ power1 |= 1; /* VMID 75k */
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, power1);
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ /* bit 3: enable bias, bit 2: enable I/O tie off buffer */
+ power1 |= 0xc;
+
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Initial cap charge at VMID 5k */
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1,
+ power1 | 0x3);
+ mdelay(100);
+ }
+
+ power1 |= 0x2; /* VMID 500k */
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, power1);
+ break;
+ case SND_SOC_BIAS_OFF:
+ /* Preserve PLL - OPCLK may be used by someone */
+ snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, ~0x20, 0);
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_2, 0);
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_3, 0);
+ break;
+ }
+
+ dev_dbg(codec->dev, "%s: %d, %x\n", __func__, level, power1);
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8978_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8978_dai_ops = {
+ .hw_params = wm8978_hw_params,
+ .digital_mute = wm8978_mute,
+ .set_fmt = wm8978_set_dai_fmt,
+ .set_clkdiv = wm8978_set_dai_clkdiv,
+ .set_sysclk = wm8978_set_dai_sysclk,
+};
+
+/* Also supports 12kHz */
+struct snd_soc_dai wm8978_dai = {
+ .name = "WM8978 HiFi",
+ .id = 1,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = WM8978_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = WM8978_FORMATS,
+ },
+ .ops = &wm8978_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8978_dai);
+
+static int wm8978_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8978_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ /* Also switch PLL off */
+ snd_soc_write(codec, WM8978_POWER_MANAGEMENT_1, 0);
+
+ return 0;
+}
+
+static int wm8978_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8978_priv *wm8978 = codec->private_data;
+ int i;
+ u16 *cache = codec->reg_cache;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8978_reg); i++) {
+ if (i == WM8978_RESET)
+ continue;
+ if (cache[i] != wm8978_reg[i])
+ snd_soc_write(codec, i, cache[i]);
+ }
+
+ wm8978_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ if (wm8978->f_pllout)
+ /* Switch PLL on */
+ snd_soc_update_bits(codec, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
+
+ return 0;
+}
+
+static int wm8978_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8978_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8978_codec;
+ codec = wm8978_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8978_snd_controls,
+ ARRAY_SIZE(wm8978_snd_controls));
+ wm8978_add_widgets(codec);
+
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int wm8978_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8978 = {
+ .probe = wm8978_probe,
+ .remove = wm8978_remove,
+ .suspend = wm8978_suspend,
+ .resume = wm8978_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8978);
+
+/*
+ * These registers contain an "update" bit - bit 8. This means, for example,
+ * that one can write new DAC digital volume for both channels, but only when
+ * the update bit is set, will also the volume be updated - simultaneously for
+ * both channels.
+ */
+static const int update_reg[] = {
+ WM8978_LEFT_DAC_DIGITAL_VOLUME,
+ WM8978_RIGHT_DAC_DIGITAL_VOLUME,
+ WM8978_LEFT_ADC_DIGITAL_VOLUME,
+ WM8978_RIGHT_ADC_DIGITAL_VOLUME,
+ WM8978_LEFT_INP_PGA_CONTROL,
+ WM8978_RIGHT_INP_PGA_CONTROL,
+ WM8978_LOUT1_HP_CONTROL,
+ WM8978_ROUT1_HP_CONTROL,
+ WM8978_LOUT2_SPK_CONTROL,
+ WM8978_ROUT2_SPK_CONTROL,
+};
+
+static __devinit int wm8978_register(struct wm8978_priv *wm8978)
+{
+ int ret, i;
+ struct snd_soc_codec *codec = &wm8978->codec;
+
+ if (wm8978_codec) {
+ dev_err(codec->dev, "Another WM8978 is registered\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Set default system clock to PLL, it is more precise, this is also the
+ * default hardware setting
+ */
+ wm8978->sysclk = WM8978_PLL;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8978;
+ codec->name = "WM8978";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8978_set_bias_level;
+ codec->dai = &wm8978_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8978_CACHEREGNUM;
+ codec->reg_cache = &wm8978->reg_cache;
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_I2C);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ memcpy(codec->reg_cache, wm8978_reg, sizeof(wm8978_reg));
+
+ /*
+ * Set the update bit in all registers, that have one. This way all
+ * writes to those registers will also cause the update bit to be
+ * written.
+ */
+ for (i = 0; i < ARRAY_SIZE(update_reg); i++)
+ ((u16 *)codec->reg_cache)[update_reg[i]] |= 0x100;
+
+ /* Reset the codec */
+ ret = snd_soc_write(codec, WM8978_RESET, 0);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err;
+ }
+
+ wm8978_dai.dev = codec->dev;
+
+ wm8978_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8978_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8978_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8978);
+ return ret;
+}
+
+static __devexit void wm8978_unregister(struct wm8978_priv *wm8978)
+{
+ wm8978_set_bias_level(&wm8978->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&wm8978_dai);
+ snd_soc_unregister_codec(&wm8978->codec);
+ kfree(wm8978);
+ wm8978_codec = NULL;
+}
+
+static __devinit int wm8978_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8978_priv *wm8978;
+ struct snd_soc_codec *codec;
+
+ wm8978 = kzalloc(sizeof(struct wm8978_priv), GFP_KERNEL);
+ if (wm8978 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8978->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8978);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8978_register(wm8978);
+}
+
+static __devexit int wm8978_i2c_remove(struct i2c_client *client)
+{
+ struct wm8978_priv *wm8978 = i2c_get_clientdata(client);
+ wm8978_unregister(wm8978);
+ return 0;
+}
+
+static const struct i2c_device_id wm8978_i2c_id[] = {
+ { "wm8978", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
+
+static struct i2c_driver wm8978_i2c_driver = {
+ .driver = {
+ .name = "WM8978",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8978_i2c_probe,
+ .remove = __devexit_p(wm8978_i2c_remove),
+ .id_table = wm8978_i2c_id,
+};
+
+static int __init wm8978_modinit(void)
+{
+ return i2c_add_driver(&wm8978_i2c_driver);
+}
+module_init(wm8978_modinit);
+
+static void __exit wm8978_exit(void)
+{
+ i2c_del_driver(&wm8978_i2c_driver);
+}
+module_exit(wm8978_exit);
+
+MODULE_DESCRIPTION("ASoC WM8978 codec driver");
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8978.h b/sound/soc/codecs/wm8978.h
new file mode 100644
index 0000000..56ec832
--- /dev/null
+++ b/sound/soc/codecs/wm8978.h
@@ -0,0 +1,86 @@
+/*
+ * wm8978.h -- codec driver for WM8978
+ *
+ * Copyright 2009 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __WM8978_H__
+#define __WM8978_H__
+
+/*
+ * Register values.
+ */
+#define WM8978_RESET 0x00
+#define WM8978_POWER_MANAGEMENT_1 0x01
+#define WM8978_POWER_MANAGEMENT_2 0x02
+#define WM8978_POWER_MANAGEMENT_3 0x03
+#define WM8978_AUDIO_INTERFACE 0x04
+#define WM8978_COMPANDING_CONTROL 0x05
+#define WM8978_CLOCKING 0x06
+#define WM8978_ADDITIONAL_CONTROL 0x07
+#define WM8978_GPIO_CONTROL 0x08
+#define WM8978_JACK_DETECT_CONTROL_1 0x09
+#define WM8978_DAC_CONTROL 0x0A
+#define WM8978_LEFT_DAC_DIGITAL_VOLUME 0x0B
+#define WM8978_RIGHT_DAC_DIGITAL_VOLUME 0x0C
+#define WM8978_JACK_DETECT_CONTROL_2 0x0D
+#define WM8978_ADC_CONTROL 0x0E
+#define WM8978_LEFT_ADC_DIGITAL_VOLUME 0x0F
+#define WM8978_RIGHT_ADC_DIGITAL_VOLUME 0x10
+#define WM8978_EQ1 0x12
+#define WM8978_EQ2 0x13
+#define WM8978_EQ3 0x14
+#define WM8978_EQ4 0x15
+#define WM8978_EQ5 0x16
+#define WM8978_DAC_LIMITER_1 0x18
+#define WM8978_DAC_LIMITER_2 0x19
+#define WM8978_NOTCH_FILTER_1 0x1b
+#define WM8978_NOTCH_FILTER_2 0x1c
+#define WM8978_NOTCH_FILTER_3 0x1d
+#define WM8978_NOTCH_FILTER_4 0x1e
+#define WM8978_ALC_CONTROL_1 0x20
+#define WM8978_ALC_CONTROL_2 0x21
+#define WM8978_ALC_CONTROL_3 0x22
+#define WM8978_NOISE_GATE 0x23
+#define WM8978_PLL_N 0x24
+#define WM8978_PLL_K1 0x25
+#define WM8978_PLL_K2 0x26
+#define WM8978_PLL_K3 0x27
+#define WM8978_3D_CONTROL 0x29
+#define WM8978_BEEP_CONTROL 0x2b
+#define WM8978_INPUT_CONTROL 0x2c
+#define WM8978_LEFT_INP_PGA_CONTROL 0x2d
+#define WM8978_RIGHT_INP_PGA_CONTROL 0x2e
+#define WM8978_LEFT_ADC_BOOST_CONTROL 0x2f
+#define WM8978_RIGHT_ADC_BOOST_CONTROL 0x30
+#define WM8978_OUTPUT_CONTROL 0x31
+#define WM8978_LEFT_MIXER_CONTROL 0x32
+#define WM8978_RIGHT_MIXER_CONTROL 0x33
+#define WM8978_LOUT1_HP_CONTROL 0x34
+#define WM8978_ROUT1_HP_CONTROL 0x35
+#define WM8978_LOUT2_SPK_CONTROL 0x36
+#define WM8978_ROUT2_SPK_CONTROL 0x37
+#define WM8978_OUT3_MIXER_CONTROL 0x38
+#define WM8978_OUT4_MIXER_CONTROL 0x39
+
+#define WM8978_CACHEREGNUM 58
+
+/* Clock divider Id's */
+enum wm8978_clk_id {
+ WM8978_OPCLKRATE,
+ WM8978_BCLKDIV,
+};
+
+enum wm8978_sysclk_src {
+ WM8978_PLL,
+ WM8978_MCLK
+};
+
+extern struct snd_soc_dai wm8978_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8978;
+
+#endif /* __WM8978_H__ */
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 341481e..a54dc77b 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -1319,10 +1319,6 @@
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
- /* we only need to suspend if we are a valid card */
- if (!codec->card)
- return 0;
-
wm8990_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
@@ -1335,10 +1331,6 @@
u8 data[2];
u16 *cache = codec->reg_cache;
- /* we only need to resume if we are a valid card */
- if (!codec->card)
- return 0;
-
/* Sync reg_cache with the hardware */
for (i = 0; i < ARRAY_SIZE(wm8990_reg); i++) {
if (i + 1 == WM8990_RESET)
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 2981afa..bf022f6 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -1,7 +1,7 @@
/*
* wm8993.c -- WM8993 ALSA SoC audio driver
*
- * Copyright 2009 Wolfson Microelectronics plc
+ * Copyright 2009, 2010 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,6 +30,16 @@
#include "wm8993.h"
#include "wm_hubs.h"
+#define WM8993_NUM_SUPPLIES 6
+static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "AVDD1",
+ "AVDD2",
+ "CPVDD",
+ "SPKVDD",
+};
+
static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
0x8993, /* R0 - Software Reset */
0x0000, /* R1 - Power Management (1) */
@@ -213,7 +224,9 @@
};
struct wm8993_priv {
+ struct wm_hubs_data hubs_data;
u16 reg_cache[WM8993_REGISTER_COUNT];
+ struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
struct wm8993_platform_data pdata;
struct snd_soc_codec codec;
int master;
@@ -227,36 +240,9 @@
int class_w_users;
unsigned int fll_fref;
unsigned int fll_fout;
+ int fll_src;
};
-static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *i2c = codec->control_data;
-
- /* Write register */
- xfer[0].addr = i2c->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = i2c->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(i2c->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
static int wm8993_volatile(unsigned int reg)
{
switch (reg) {
@@ -271,48 +257,6 @@
}
}
-static unsigned int wm8993_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *reg_cache = codec->reg_cache;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- if (wm8993_volatile(reg))
- return wm8993_read_hw(codec, reg);
- else
- return reg_cache[reg];
-}
-
-static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 *reg_cache = codec->reg_cache;
- u8 data[3];
- int ret;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- /* data is
- * D15..D9 WM8993 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- if (!wm8993_volatile(reg))
- reg_cache[reg] = value;
-
- ret = codec->hw_write(codec->control_data, data, 3);
-
- if (ret == 3)
- return 0;
- if (ret < 0)
- return ret;
- return -EIO;
-}
-
struct _fll_div {
u16 fll_fratio;
u16 fll_outdiv;
@@ -441,9 +385,9 @@
wm8993->fll_fref = 0;
wm8993->fll_fout = 0;
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
return 0;
}
@@ -452,7 +396,7 @@
if (ret != 0)
return ret;
- reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
switch (fll_id) {
@@ -474,38 +418,39 @@
/* Any FLL configuration change requires that the FLL be
* disabled first. */
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
/* Apply the configuration */
if (fll_div.k)
reg1 |= WM8993_FLL_FRAC_MASK;
else
reg1 &= ~WM8993_FLL_FRAC_MASK;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
- wm8993_write(codec, WM8993_FLL_CONTROL_2,
- (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
- (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
- wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
- reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
reg4 &= ~WM8993_FLL_N_MASK;
reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
/* Enable the FLL */
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
wm8993->fll_fref = Fref;
wm8993->fll_fout = Fout;
+ wm8993->fll_src = source;
return 0;
}
@@ -520,7 +465,7 @@
case WM8993_SYSCLK_MCLK:
dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
if (wm8993->mclk_rate > 13500000) {
reg |= WM8993_MCLK_DIV;
@@ -529,14 +474,14 @@
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->mclk_rate;
}
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
case WM8993_SYSCLK_FLL:
dev_dbg(codec->dev, "Using %dHz FLL clock\n",
wm8993->fll_fout);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
reg |= WM8993_SYSCLK_SRC;
if (wm8993->fll_fout > 13500000) {
reg |= WM8993_MCLK_DIV;
@@ -545,7 +490,7 @@
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->fll_fout;
}
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
default:
@@ -978,10 +923,33 @@
{ "Right Headphone Mux", "DAC", "DACR" },
};
+static void wm8993_cache_restore(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i;
+
+ if (!codec->cache_sync)
+ return;
+
+ /* Reenable hardware writes */
+ codec->cache_only = 0;
+
+ /* Restore the register settings */
+ for (i = 1; i < WM8993_MAX_REGISTER; i++) {
+ if (cache[i] == wm8993_reg_defaults[i])
+ continue;
+ snd_soc_write(codec, i, cache[i]);
+ }
+
+ /* We're in sync again */
+ codec->cache_sync = 0;
+}
+
static int wm8993_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8993_priv *wm8993 = codec->private_data;
+ int ret;
switch (level) {
case SND_SOC_BIAS_ON:
@@ -995,6 +963,18 @@
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0)
+ return ret;
+
+ wm8993_cache_restore(codec);
+
+ /* Tune DC servo configuration */
+ snd_soc_write(codec, 0x44, 3);
+ snd_soc_write(codec, 0x56, 3);
+ snd_soc_write(codec, 0x44, 0);
+
/* Bring up VMID with fast soft start */
snd_soc_update_bits(codec, WM8993_ANTIPOP2,
WM8993_STARTUP_BIAS_ENA |
@@ -1042,6 +1022,18 @@
snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
0);
+
+#ifdef CONFIG_REGULATOR
+ /* Post 2.6.34 we will be able to get a callback when
+ * the regulators are disabled which we can use but
+ * for now just assume that the power will be cut if
+ * the regulator API is in use.
+ */
+ codec->cache_sync = 1;
+#endif
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
break;
}
@@ -1075,8 +1067,8 @@
{
struct snd_soc_codec *codec = dai->codec;
struct wm8993_priv *wm8993 = codec->private_data;
- unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
- unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
@@ -1159,8 +1151,8 @@
return -EINVAL;
}
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
return 0;
}
@@ -1174,16 +1166,16 @@
int ret, i, best, best_val, cur_val;
unsigned int clocking1, clocking3, aif1, aif4;
- clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
clocking1 &= ~WM8993_BCLK_DIV_MASK;
- clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
- aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
aif1 &= ~WM8993_AIF_WL_MASK;
- aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif4 &= ~WM8993_LRCLK_RATE_MASK;
/* What BCLK do we need? */
@@ -1276,14 +1268,14 @@
dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
aif4 |= wm8993->bclk / wm8993->fs;
- wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
- wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
+ snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
/* ReTune Mobile? */
if (wm8993->pdata.num_retune_configs) {
- u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
struct wm8993_retune_mobile_setting *s;
best = 0;
@@ -1306,7 +1298,7 @@
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
for (i = 1; i < ARRAY_SIZE(s->config); i++)
- wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+ snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
}
@@ -1319,14 +1311,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm8993_read(codec, WM8993_DAC_CTRL);
+ reg = snd_soc_read(codec, WM8993_DAC_CTRL);
if (mute)
reg |= WM8993_DAC_MUTE;
else
reg &= ~WM8993_DAC_MUTE;
- wm8993_write(codec, WM8993_DAC_CTRL, reg);
+ snd_soc_write(codec, WM8993_DAC_CTRL, reg);
return 0;
}
@@ -1480,9 +1472,66 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8993_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int fll_fout = wm8993->fll_fout;
+ int fll_fref = wm8993->fll_fref;
+ int ret;
+
+ /* Stop the FLL in an orderly fashion */
+ ret = wm8993_set_fll(codec->dai, 0, 0, 0, 0);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to stop FLL\n");
+ return ret;
+ }
+
+ wm8993->fll_fout = fll_fout;
+ wm8993->fll_fref = fll_fref;
+
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8993_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret;
+
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Restart the FLL? */
+ if (wm8993->fll_fout) {
+ int fll_fout = wm8993->fll_fout;
+ int fll_fref = wm8993->fll_fref;
+
+ wm8993->fll_fref = 0;
+ wm8993->fll_fout = 0;
+
+ ret = wm8993_set_fll(codec->dai, 0, wm8993->fll_src,
+ fll_fref, fll_fout);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to restart FLL\n");
+ }
+
+ return 0;
+}
+#else
+#define wm8993_suspend NULL
+#define wm8993_resume NULL
+#endif
+
struct snd_soc_codec_device soc_codec_dev_wm8993 = {
.probe = wm8993_probe,
.remove = wm8993_remove,
+ .suspend = wm8993_suspend,
+ .resume = wm8993_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
@@ -1493,6 +1542,7 @@
struct snd_soc_codec *codec;
unsigned int val;
int ret;
+ int i;
if (wm8993_codec) {
dev_err(&i2c->dev, "A WM8993 is already registered\n");
@@ -1513,9 +1563,7 @@
INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "WM8993";
- codec->read = wm8993_read;
- codec->write = wm8993_write;
- codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->volatile_register = wm8993_volatile;
codec->reg_cache = wm8993->reg_cache;
codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
codec->bias_level = SND_SOC_BIAS_OFF;
@@ -1524,25 +1572,53 @@
codec->num_dai = 1;
codec->private_data = wm8993;
+ wm8993->hubs_data.hp_startup_mode = 1;
+ wm8993->hubs_data.dcs_codes = -2;
+
memcpy(wm8993->reg_cache, wm8993_reg_defaults,
sizeof(wm8993->reg_cache));
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
i2c_set_clientdata(i2c, wm8993);
codec->control_data = i2c;
wm8993_codec = codec;
codec->dev = &i2c->dev;
- val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
- if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
- dev_err(codec->dev, "Invalid ID register value %x\n", val);
- ret = -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
+ wm8993->supplies[i].supply = wm8993_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
goto err;
}
- ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
+ if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
+ dev_err(codec->dev, "Invalid ID register value %x\n", val);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
if (ret != 0)
- goto err;
+ goto err_enable;
+
+ codec->cache_only = 1;
/* By default we're using the output mixers */
wm8993->class_w_users = 2;
@@ -1572,7 +1648,7 @@
ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
if (ret != 0)
- goto err;
+ goto err_enable;
wm8993_dai.dev = codec->dev;
@@ -1586,6 +1662,10 @@
err_bias:
wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
err:
wm8993_codec = NULL;
kfree(wm8993);
@@ -1600,6 +1680,7 @@
snd_soc_unregister_dai(&wm8993_dai);
wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
kfree(wm8993);
return 0;
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
new file mode 100644
index 0000000..29f3771
--- /dev/null
+++ b/sound/soc/codecs/wm8994.c
@@ -0,0 +1,3867 @@
+/*
+ * wm8994.c -- WM8994 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/registers.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/wm8994/gpio.h>
+
+#include "wm8994.h"
+#include "wm_hubs.h"
+
+static struct snd_soc_codec *wm8994_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8994;
+
+struct fll_config {
+ int src;
+ int in;
+ int out;
+};
+
+#define WM8994_NUM_DRC 3
+#define WM8994_NUM_EQ 3
+
+static int wm8994_drc_base[] = {
+ WM8994_AIF1_DRC1_1,
+ WM8994_AIF1_DRC2_1,
+ WM8994_AIF2_DRC_1,
+};
+
+static int wm8994_retune_mobile_base[] = {
+ WM8994_AIF1_DAC1_EQ_GAINS_1,
+ WM8994_AIF1_DAC2_EQ_GAINS_1,
+ WM8994_AIF2_EQ_GAINS_1,
+};
+
+#define WM8994_REG_CACHE_SIZE 0x621
+
+/* codec private data */
+struct wm8994_priv {
+ struct wm_hubs_data hubs;
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8994_REG_CACHE_SIZE + 1];
+ int sysclk[2];
+ int sysclk_rate[2];
+ int mclk[2];
+ int aifclk[2];
+ struct fll_config fll[2], fll_suspend[2];
+
+ int dac_rates[2];
+ int lrclk_shared[2];
+
+ /* Platform dependant DRC configuration */
+ const char **drc_texts;
+ int drc_cfg[WM8994_NUM_DRC];
+ struct soc_enum drc_enum;
+
+ /* Platform dependant ReTune mobile configuration */
+ int num_retune_mobile_texts;
+ const char **retune_mobile_texts;
+ int retune_mobile_cfg[WM8994_NUM_EQ];
+ struct soc_enum retune_mobile_enum;
+
+ struct wm8994_pdata *pdata;
+};
+
+static struct {
+ unsigned short readable; /* Mask of readable bits */
+ unsigned short writable; /* Mask of writable bits */
+ unsigned short vol; /* Mask of volatile bits */
+} access_masks[] = {
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R0 - Software Reset */
+ { 0x3B37, 0x3B37, 0x0000 }, /* R1 - Power Management (1) */
+ { 0x6BF0, 0x6BF0, 0x0000 }, /* R2 - Power Management (2) */
+ { 0x3FF0, 0x3FF0, 0x0000 }, /* R3 - Power Management (3) */
+ { 0x3F3F, 0x3F3F, 0x0000 }, /* R4 - Power Management (4) */
+ { 0x3F0F, 0x3F0F, 0x0000 }, /* R5 - Power Management (5) */
+ { 0x003F, 0x003F, 0x0000 }, /* R6 - Power Management (6) */
+ { 0x0000, 0x0000, 0x0000 }, /* R7 */
+ { 0x0000, 0x0000, 0x0000 }, /* R8 */
+ { 0x0000, 0x0000, 0x0000 }, /* R9 */
+ { 0x0000, 0x0000, 0x0000 }, /* R10 */
+ { 0x0000, 0x0000, 0x0000 }, /* R11 */
+ { 0x0000, 0x0000, 0x0000 }, /* R12 */
+ { 0x0000, 0x0000, 0x0000 }, /* R13 */
+ { 0x0000, 0x0000, 0x0000 }, /* R14 */
+ { 0x0000, 0x0000, 0x0000 }, /* R15 */
+ { 0x0000, 0x0000, 0x0000 }, /* R16 */
+ { 0x0000, 0x0000, 0x0000 }, /* R17 */
+ { 0x0000, 0x0000, 0x0000 }, /* R18 */
+ { 0x0000, 0x0000, 0x0000 }, /* R19 */
+ { 0x0000, 0x0000, 0x0000 }, /* R20 */
+ { 0x01C0, 0x01C0, 0x0000 }, /* R21 - Input Mixer (1) */
+ { 0x0000, 0x0000, 0x0000 }, /* R22 */
+ { 0x0000, 0x0000, 0x0000 }, /* R23 */
+ { 0x00DF, 0x01DF, 0x0000 }, /* R24 - Left Line Input 1&2 Volume */
+ { 0x00DF, 0x01DF, 0x0000 }, /* R25 - Left Line Input 3&4 Volume */
+ { 0x00DF, 0x01DF, 0x0000 }, /* R26 - Right Line Input 1&2 Volume */
+ { 0x00DF, 0x01DF, 0x0000 }, /* R27 - Right Line Input 3&4 Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R28 - Left Output Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R29 - Right Output Volume */
+ { 0x0077, 0x0077, 0x0000 }, /* R30 - Line Outputs Volume */
+ { 0x0030, 0x0030, 0x0000 }, /* R31 - HPOUT2 Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R32 - Left OPGA Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R33 - Right OPGA Volume */
+ { 0x007F, 0x007F, 0x0000 }, /* R34 - SPKMIXL Attenuation */
+ { 0x017F, 0x017F, 0x0000 }, /* R35 - SPKMIXR Attenuation */
+ { 0x003F, 0x003F, 0x0000 }, /* R36 - SPKOUT Mixers */
+ { 0x003F, 0x003F, 0x0000 }, /* R37 - ClassD */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R38 - Speaker Volume Left */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R39 - Speaker Volume Right */
+ { 0x00FF, 0x00FF, 0x0000 }, /* R40 - Input Mixer (2) */
+ { 0x01B7, 0x01B7, 0x0000 }, /* R41 - Input Mixer (3) */
+ { 0x01B7, 0x01B7, 0x0000 }, /* R42 - Input Mixer (4) */
+ { 0x01C7, 0x01C7, 0x0000 }, /* R43 - Input Mixer (5) */
+ { 0x01C7, 0x01C7, 0x0000 }, /* R44 - Input Mixer (6) */
+ { 0x01FF, 0x01FF, 0x0000 }, /* R45 - Output Mixer (1) */
+ { 0x01FF, 0x01FF, 0x0000 }, /* R46 - Output Mixer (2) */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R47 - Output Mixer (3) */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R48 - Output Mixer (4) */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R49 - Output Mixer (5) */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R50 - Output Mixer (6) */
+ { 0x0038, 0x0038, 0x0000 }, /* R51 - HPOUT2 Mixer */
+ { 0x0077, 0x0077, 0x0000 }, /* R52 - Line Mixer (1) */
+ { 0x0077, 0x0077, 0x0000 }, /* R53 - Line Mixer (2) */
+ { 0x03FF, 0x03FF, 0x0000 }, /* R54 - Speaker Mixer */
+ { 0x00C1, 0x00C1, 0x0000 }, /* R55 - Additional Control */
+ { 0x00F0, 0x00F0, 0x0000 }, /* R56 - AntiPOP (1) */
+ { 0x01EF, 0x01EF, 0x0000 }, /* R57 - AntiPOP (2) */
+ { 0x00FF, 0x00FF, 0x0000 }, /* R58 - MICBIAS */
+ { 0x000F, 0x000F, 0x0000 }, /* R59 - LDO 1 */
+ { 0x0007, 0x0007, 0x0000 }, /* R60 - LDO 2 */
+ { 0x0000, 0x0000, 0x0000 }, /* R61 */
+ { 0x0000, 0x0000, 0x0000 }, /* R62 */
+ { 0x0000, 0x0000, 0x0000 }, /* R63 */
+ { 0x0000, 0x0000, 0x0000 }, /* R64 */
+ { 0x0000, 0x0000, 0x0000 }, /* R65 */
+ { 0x0000, 0x0000, 0x0000 }, /* R66 */
+ { 0x0000, 0x0000, 0x0000 }, /* R67 */
+ { 0x0000, 0x0000, 0x0000 }, /* R68 */
+ { 0x0000, 0x0000, 0x0000 }, /* R69 */
+ { 0x0000, 0x0000, 0x0000 }, /* R70 */
+ { 0x0000, 0x0000, 0x0000 }, /* R71 */
+ { 0x0000, 0x0000, 0x0000 }, /* R72 */
+ { 0x0000, 0x0000, 0x0000 }, /* R73 */
+ { 0x0000, 0x0000, 0x0000 }, /* R74 */
+ { 0x0000, 0x0000, 0x0000 }, /* R75 */
+ { 0x8000, 0x8000, 0x0000 }, /* R76 - Charge Pump (1) */
+ { 0x0000, 0x0000, 0x0000 }, /* R77 */
+ { 0x0000, 0x0000, 0x0000 }, /* R78 */
+ { 0x0000, 0x0000, 0x0000 }, /* R79 */
+ { 0x0000, 0x0000, 0x0000 }, /* R80 */
+ { 0x0301, 0x0301, 0x0000 }, /* R81 - Class W (1) */
+ { 0x0000, 0x0000, 0x0000 }, /* R82 */
+ { 0x0000, 0x0000, 0x0000 }, /* R83 */
+ { 0x333F, 0x333F, 0x0000 }, /* R84 - DC Servo (1) */
+ { 0x0FEF, 0x0FEF, 0x0000 }, /* R85 - DC Servo (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R86 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R87 - DC Servo (4) */
+ { 0x0333, 0x0000, 0x0000 }, /* R88 - DC Servo Readback */
+ { 0x0000, 0x0000, 0x0000 }, /* R89 */
+ { 0x0000, 0x0000, 0x0000 }, /* R90 */
+ { 0x0000, 0x0000, 0x0000 }, /* R91 */
+ { 0x0000, 0x0000, 0x0000 }, /* R92 */
+ { 0x0000, 0x0000, 0x0000 }, /* R93 */
+ { 0x0000, 0x0000, 0x0000 }, /* R94 */
+ { 0x0000, 0x0000, 0x0000 }, /* R95 */
+ { 0x00EE, 0x00EE, 0x0000 }, /* R96 - Analogue HP (1) */
+ { 0x0000, 0x0000, 0x0000 }, /* R97 */
+ { 0x0000, 0x0000, 0x0000 }, /* R98 */
+ { 0x0000, 0x0000, 0x0000 }, /* R99 */
+ { 0x0000, 0x0000, 0x0000 }, /* R100 */
+ { 0x0000, 0x0000, 0x0000 }, /* R101 */
+ { 0x0000, 0x0000, 0x0000 }, /* R102 */
+ { 0x0000, 0x0000, 0x0000 }, /* R103 */
+ { 0x0000, 0x0000, 0x0000 }, /* R104 */
+ { 0x0000, 0x0000, 0x0000 }, /* R105 */
+ { 0x0000, 0x0000, 0x0000 }, /* R106 */
+ { 0x0000, 0x0000, 0x0000 }, /* R107 */
+ { 0x0000, 0x0000, 0x0000 }, /* R108 */
+ { 0x0000, 0x0000, 0x0000 }, /* R109 */
+ { 0x0000, 0x0000, 0x0000 }, /* R110 */
+ { 0x0000, 0x0000, 0x0000 }, /* R111 */
+ { 0x0000, 0x0000, 0x0000 }, /* R112 */
+ { 0x0000, 0x0000, 0x0000 }, /* R113 */
+ { 0x0000, 0x0000, 0x0000 }, /* R114 */
+ { 0x0000, 0x0000, 0x0000 }, /* R115 */
+ { 0x0000, 0x0000, 0x0000 }, /* R116 */
+ { 0x0000, 0x0000, 0x0000 }, /* R117 */
+ { 0x0000, 0x0000, 0x0000 }, /* R118 */
+ { 0x0000, 0x0000, 0x0000 }, /* R119 */
+ { 0x0000, 0x0000, 0x0000 }, /* R120 */
+ { 0x0000, 0x0000, 0x0000 }, /* R121 */
+ { 0x0000, 0x0000, 0x0000 }, /* R122 */
+ { 0x0000, 0x0000, 0x0000 }, /* R123 */
+ { 0x0000, 0x0000, 0x0000 }, /* R124 */
+ { 0x0000, 0x0000, 0x0000 }, /* R125 */
+ { 0x0000, 0x0000, 0x0000 }, /* R126 */
+ { 0x0000, 0x0000, 0x0000 }, /* R127 */
+ { 0x0000, 0x0000, 0x0000 }, /* R128 */
+ { 0x0000, 0x0000, 0x0000 }, /* R129 */
+ { 0x0000, 0x0000, 0x0000 }, /* R130 */
+ { 0x0000, 0x0000, 0x0000 }, /* R131 */
+ { 0x0000, 0x0000, 0x0000 }, /* R132 */
+ { 0x0000, 0x0000, 0x0000 }, /* R133 */
+ { 0x0000, 0x0000, 0x0000 }, /* R134 */
+ { 0x0000, 0x0000, 0x0000 }, /* R135 */
+ { 0x0000, 0x0000, 0x0000 }, /* R136 */
+ { 0x0000, 0x0000, 0x0000 }, /* R137 */
+ { 0x0000, 0x0000, 0x0000 }, /* R138 */
+ { 0x0000, 0x0000, 0x0000 }, /* R139 */
+ { 0x0000, 0x0000, 0x0000 }, /* R140 */
+ { 0x0000, 0x0000, 0x0000 }, /* R141 */
+ { 0x0000, 0x0000, 0x0000 }, /* R142 */
+ { 0x0000, 0x0000, 0x0000 }, /* R143 */
+ { 0x0000, 0x0000, 0x0000 }, /* R144 */
+ { 0x0000, 0x0000, 0x0000 }, /* R145 */
+ { 0x0000, 0x0000, 0x0000 }, /* R146 */
+ { 0x0000, 0x0000, 0x0000 }, /* R147 */
+ { 0x0000, 0x0000, 0x0000 }, /* R148 */
+ { 0x0000, 0x0000, 0x0000 }, /* R149 */
+ { 0x0000, 0x0000, 0x0000 }, /* R150 */
+ { 0x0000, 0x0000, 0x0000 }, /* R151 */
+ { 0x0000, 0x0000, 0x0000 }, /* R152 */
+ { 0x0000, 0x0000, 0x0000 }, /* R153 */
+ { 0x0000, 0x0000, 0x0000 }, /* R154 */
+ { 0x0000, 0x0000, 0x0000 }, /* R155 */
+ { 0x0000, 0x0000, 0x0000 }, /* R156 */
+ { 0x0000, 0x0000, 0x0000 }, /* R157 */
+ { 0x0000, 0x0000, 0x0000 }, /* R158 */
+ { 0x0000, 0x0000, 0x0000 }, /* R159 */
+ { 0x0000, 0x0000, 0x0000 }, /* R160 */
+ { 0x0000, 0x0000, 0x0000 }, /* R161 */
+ { 0x0000, 0x0000, 0x0000 }, /* R162 */
+ { 0x0000, 0x0000, 0x0000 }, /* R163 */
+ { 0x0000, 0x0000, 0x0000 }, /* R164 */
+ { 0x0000, 0x0000, 0x0000 }, /* R165 */
+ { 0x0000, 0x0000, 0x0000 }, /* R166 */
+ { 0x0000, 0x0000, 0x0000 }, /* R167 */
+ { 0x0000, 0x0000, 0x0000 }, /* R168 */
+ { 0x0000, 0x0000, 0x0000 }, /* R169 */
+ { 0x0000, 0x0000, 0x0000 }, /* R170 */
+ { 0x0000, 0x0000, 0x0000 }, /* R171 */
+ { 0x0000, 0x0000, 0x0000 }, /* R172 */
+ { 0x0000, 0x0000, 0x0000 }, /* R173 */
+ { 0x0000, 0x0000, 0x0000 }, /* R174 */
+ { 0x0000, 0x0000, 0x0000 }, /* R175 */
+ { 0x0000, 0x0000, 0x0000 }, /* R176 */
+ { 0x0000, 0x0000, 0x0000 }, /* R177 */
+ { 0x0000, 0x0000, 0x0000 }, /* R178 */
+ { 0x0000, 0x0000, 0x0000 }, /* R179 */
+ { 0x0000, 0x0000, 0x0000 }, /* R180 */
+ { 0x0000, 0x0000, 0x0000 }, /* R181 */
+ { 0x0000, 0x0000, 0x0000 }, /* R182 */
+ { 0x0000, 0x0000, 0x0000 }, /* R183 */
+ { 0x0000, 0x0000, 0x0000 }, /* R184 */
+ { 0x0000, 0x0000, 0x0000 }, /* R185 */
+ { 0x0000, 0x0000, 0x0000 }, /* R186 */
+ { 0x0000, 0x0000, 0x0000 }, /* R187 */
+ { 0x0000, 0x0000, 0x0000 }, /* R188 */
+ { 0x0000, 0x0000, 0x0000 }, /* R189 */
+ { 0x0000, 0x0000, 0x0000 }, /* R190 */
+ { 0x0000, 0x0000, 0x0000 }, /* R191 */
+ { 0x0000, 0x0000, 0x0000 }, /* R192 */
+ { 0x0000, 0x0000, 0x0000 }, /* R193 */
+ { 0x0000, 0x0000, 0x0000 }, /* R194 */
+ { 0x0000, 0x0000, 0x0000 }, /* R195 */
+ { 0x0000, 0x0000, 0x0000 }, /* R196 */
+ { 0x0000, 0x0000, 0x0000 }, /* R197 */
+ { 0x0000, 0x0000, 0x0000 }, /* R198 */
+ { 0x0000, 0x0000, 0x0000 }, /* R199 */
+ { 0x0000, 0x0000, 0x0000 }, /* R200 */
+ { 0x0000, 0x0000, 0x0000 }, /* R201 */
+ { 0x0000, 0x0000, 0x0000 }, /* R202 */
+ { 0x0000, 0x0000, 0x0000 }, /* R203 */
+ { 0x0000, 0x0000, 0x0000 }, /* R204 */
+ { 0x0000, 0x0000, 0x0000 }, /* R205 */
+ { 0x0000, 0x0000, 0x0000 }, /* R206 */
+ { 0x0000, 0x0000, 0x0000 }, /* R207 */
+ { 0x0000, 0x0000, 0x0000 }, /* R208 */
+ { 0x0000, 0x0000, 0x0000 }, /* R209 */
+ { 0x0000, 0x0000, 0x0000 }, /* R210 */
+ { 0x0000, 0x0000, 0x0000 }, /* R211 */
+ { 0x0000, 0x0000, 0x0000 }, /* R212 */
+ { 0x0000, 0x0000, 0x0000 }, /* R213 */
+ { 0x0000, 0x0000, 0x0000 }, /* R214 */
+ { 0x0000, 0x0000, 0x0000 }, /* R215 */
+ { 0x0000, 0x0000, 0x0000 }, /* R216 */
+ { 0x0000, 0x0000, 0x0000 }, /* R217 */
+ { 0x0000, 0x0000, 0x0000 }, /* R218 */
+ { 0x0000, 0x0000, 0x0000 }, /* R219 */
+ { 0x0000, 0x0000, 0x0000 }, /* R220 */
+ { 0x0000, 0x0000, 0x0000 }, /* R221 */
+ { 0x0000, 0x0000, 0x0000 }, /* R222 */
+ { 0x0000, 0x0000, 0x0000 }, /* R223 */
+ { 0x0000, 0x0000, 0x0000 }, /* R224 */
+ { 0x0000, 0x0000, 0x0000 }, /* R225 */
+ { 0x0000, 0x0000, 0x0000 }, /* R226 */
+ { 0x0000, 0x0000, 0x0000 }, /* R227 */
+ { 0x0000, 0x0000, 0x0000 }, /* R228 */
+ { 0x0000, 0x0000, 0x0000 }, /* R229 */
+ { 0x0000, 0x0000, 0x0000 }, /* R230 */
+ { 0x0000, 0x0000, 0x0000 }, /* R231 */
+ { 0x0000, 0x0000, 0x0000 }, /* R232 */
+ { 0x0000, 0x0000, 0x0000 }, /* R233 */
+ { 0x0000, 0x0000, 0x0000 }, /* R234 */
+ { 0x0000, 0x0000, 0x0000 }, /* R235 */
+ { 0x0000, 0x0000, 0x0000 }, /* R236 */
+ { 0x0000, 0x0000, 0x0000 }, /* R237 */
+ { 0x0000, 0x0000, 0x0000 }, /* R238 */
+ { 0x0000, 0x0000, 0x0000 }, /* R239 */
+ { 0x0000, 0x0000, 0x0000 }, /* R240 */
+ { 0x0000, 0x0000, 0x0000 }, /* R241 */
+ { 0x0000, 0x0000, 0x0000 }, /* R242 */
+ { 0x0000, 0x0000, 0x0000 }, /* R243 */
+ { 0x0000, 0x0000, 0x0000 }, /* R244 */
+ { 0x0000, 0x0000, 0x0000 }, /* R245 */
+ { 0x0000, 0x0000, 0x0000 }, /* R246 */
+ { 0x0000, 0x0000, 0x0000 }, /* R247 */
+ { 0x0000, 0x0000, 0x0000 }, /* R248 */
+ { 0x0000, 0x0000, 0x0000 }, /* R249 */
+ { 0x0000, 0x0000, 0x0000 }, /* R250 */
+ { 0x0000, 0x0000, 0x0000 }, /* R251 */
+ { 0x0000, 0x0000, 0x0000 }, /* R252 */
+ { 0x0000, 0x0000, 0x0000 }, /* R253 */
+ { 0x0000, 0x0000, 0x0000 }, /* R254 */
+ { 0x0000, 0x0000, 0x0000 }, /* R255 */
+ { 0x000F, 0x0000, 0x0000 }, /* R256 - Chip Revision */
+ { 0x0074, 0x0074, 0x0000 }, /* R257 - Control Interface */
+ { 0x0000, 0x0000, 0x0000 }, /* R258 */
+ { 0x0000, 0x0000, 0x0000 }, /* R259 */
+ { 0x0000, 0x0000, 0x0000 }, /* R260 */
+ { 0x0000, 0x0000, 0x0000 }, /* R261 */
+ { 0x0000, 0x0000, 0x0000 }, /* R262 */
+ { 0x0000, 0x0000, 0x0000 }, /* R263 */
+ { 0x0000, 0x0000, 0x0000 }, /* R264 */
+ { 0x0000, 0x0000, 0x0000 }, /* R265 */
+ { 0x0000, 0x0000, 0x0000 }, /* R266 */
+ { 0x0000, 0x0000, 0x0000 }, /* R267 */
+ { 0x0000, 0x0000, 0x0000 }, /* R268 */
+ { 0x0000, 0x0000, 0x0000 }, /* R269 */
+ { 0x0000, 0x0000, 0x0000 }, /* R270 */
+ { 0x0000, 0x0000, 0x0000 }, /* R271 */
+ { 0x807F, 0x837F, 0x0000 }, /* R272 - Write Sequencer Ctrl (1) */
+ { 0x017F, 0x0000, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R274 */
+ { 0x0000, 0x0000, 0x0000 }, /* R275 */
+ { 0x0000, 0x0000, 0x0000 }, /* R276 */
+ { 0x0000, 0x0000, 0x0000 }, /* R277 */
+ { 0x0000, 0x0000, 0x0000 }, /* R278 */
+ { 0x0000, 0x0000, 0x0000 }, /* R279 */
+ { 0x0000, 0x0000, 0x0000 }, /* R280 */
+ { 0x0000, 0x0000, 0x0000 }, /* R281 */
+ { 0x0000, 0x0000, 0x0000 }, /* R282 */
+ { 0x0000, 0x0000, 0x0000 }, /* R283 */
+ { 0x0000, 0x0000, 0x0000 }, /* R284 */
+ { 0x0000, 0x0000, 0x0000 }, /* R285 */
+ { 0x0000, 0x0000, 0x0000 }, /* R286 */
+ { 0x0000, 0x0000, 0x0000 }, /* R287 */
+ { 0x0000, 0x0000, 0x0000 }, /* R288 */
+ { 0x0000, 0x0000, 0x0000 }, /* R289 */
+ { 0x0000, 0x0000, 0x0000 }, /* R290 */
+ { 0x0000, 0x0000, 0x0000 }, /* R291 */
+ { 0x0000, 0x0000, 0x0000 }, /* R292 */
+ { 0x0000, 0x0000, 0x0000 }, /* R293 */
+ { 0x0000, 0x0000, 0x0000 }, /* R294 */
+ { 0x0000, 0x0000, 0x0000 }, /* R295 */
+ { 0x0000, 0x0000, 0x0000 }, /* R296 */
+ { 0x0000, 0x0000, 0x0000 }, /* R297 */
+ { 0x0000, 0x0000, 0x0000 }, /* R298 */
+ { 0x0000, 0x0000, 0x0000 }, /* R299 */
+ { 0x0000, 0x0000, 0x0000 }, /* R300 */
+ { 0x0000, 0x0000, 0x0000 }, /* R301 */
+ { 0x0000, 0x0000, 0x0000 }, /* R302 */
+ { 0x0000, 0x0000, 0x0000 }, /* R303 */
+ { 0x0000, 0x0000, 0x0000 }, /* R304 */
+ { 0x0000, 0x0000, 0x0000 }, /* R305 */
+ { 0x0000, 0x0000, 0x0000 }, /* R306 */
+ { 0x0000, 0x0000, 0x0000 }, /* R307 */
+ { 0x0000, 0x0000, 0x0000 }, /* R308 */
+ { 0x0000, 0x0000, 0x0000 }, /* R309 */
+ { 0x0000, 0x0000, 0x0000 }, /* R310 */
+ { 0x0000, 0x0000, 0x0000 }, /* R311 */
+ { 0x0000, 0x0000, 0x0000 }, /* R312 */
+ { 0x0000, 0x0000, 0x0000 }, /* R313 */
+ { 0x0000, 0x0000, 0x0000 }, /* R314 */
+ { 0x0000, 0x0000, 0x0000 }, /* R315 */
+ { 0x0000, 0x0000, 0x0000 }, /* R316 */
+ { 0x0000, 0x0000, 0x0000 }, /* R317 */
+ { 0x0000, 0x0000, 0x0000 }, /* R318 */
+ { 0x0000, 0x0000, 0x0000 }, /* R319 */
+ { 0x0000, 0x0000, 0x0000 }, /* R320 */
+ { 0x0000, 0x0000, 0x0000 }, /* R321 */
+ { 0x0000, 0x0000, 0x0000 }, /* R322 */
+ { 0x0000, 0x0000, 0x0000 }, /* R323 */
+ { 0x0000, 0x0000, 0x0000 }, /* R324 */
+ { 0x0000, 0x0000, 0x0000 }, /* R325 */
+ { 0x0000, 0x0000, 0x0000 }, /* R326 */
+ { 0x0000, 0x0000, 0x0000 }, /* R327 */
+ { 0x0000, 0x0000, 0x0000 }, /* R328 */
+ { 0x0000, 0x0000, 0x0000 }, /* R329 */
+ { 0x0000, 0x0000, 0x0000 }, /* R330 */
+ { 0x0000, 0x0000, 0x0000 }, /* R331 */
+ { 0x0000, 0x0000, 0x0000 }, /* R332 */
+ { 0x0000, 0x0000, 0x0000 }, /* R333 */
+ { 0x0000, 0x0000, 0x0000 }, /* R334 */
+ { 0x0000, 0x0000, 0x0000 }, /* R335 */
+ { 0x0000, 0x0000, 0x0000 }, /* R336 */
+ { 0x0000, 0x0000, 0x0000 }, /* R337 */
+ { 0x0000, 0x0000, 0x0000 }, /* R338 */
+ { 0x0000, 0x0000, 0x0000 }, /* R339 */
+ { 0x0000, 0x0000, 0x0000 }, /* R340 */
+ { 0x0000, 0x0000, 0x0000 }, /* R341 */
+ { 0x0000, 0x0000, 0x0000 }, /* R342 */
+ { 0x0000, 0x0000, 0x0000 }, /* R343 */
+ { 0x0000, 0x0000, 0x0000 }, /* R344 */
+ { 0x0000, 0x0000, 0x0000 }, /* R345 */
+ { 0x0000, 0x0000, 0x0000 }, /* R346 */
+ { 0x0000, 0x0000, 0x0000 }, /* R347 */
+ { 0x0000, 0x0000, 0x0000 }, /* R348 */
+ { 0x0000, 0x0000, 0x0000 }, /* R349 */
+ { 0x0000, 0x0000, 0x0000 }, /* R350 */
+ { 0x0000, 0x0000, 0x0000 }, /* R351 */
+ { 0x0000, 0x0000, 0x0000 }, /* R352 */
+ { 0x0000, 0x0000, 0x0000 }, /* R353 */
+ { 0x0000, 0x0000, 0x0000 }, /* R354 */
+ { 0x0000, 0x0000, 0x0000 }, /* R355 */
+ { 0x0000, 0x0000, 0x0000 }, /* R356 */
+ { 0x0000, 0x0000, 0x0000 }, /* R357 */
+ { 0x0000, 0x0000, 0x0000 }, /* R358 */
+ { 0x0000, 0x0000, 0x0000 }, /* R359 */
+ { 0x0000, 0x0000, 0x0000 }, /* R360 */
+ { 0x0000, 0x0000, 0x0000 }, /* R361 */
+ { 0x0000, 0x0000, 0x0000 }, /* R362 */
+ { 0x0000, 0x0000, 0x0000 }, /* R363 */
+ { 0x0000, 0x0000, 0x0000 }, /* R364 */
+ { 0x0000, 0x0000, 0x0000 }, /* R365 */
+ { 0x0000, 0x0000, 0x0000 }, /* R366 */
+ { 0x0000, 0x0000, 0x0000 }, /* R367 */
+ { 0x0000, 0x0000, 0x0000 }, /* R368 */
+ { 0x0000, 0x0000, 0x0000 }, /* R369 */
+ { 0x0000, 0x0000, 0x0000 }, /* R370 */
+ { 0x0000, 0x0000, 0x0000 }, /* R371 */
+ { 0x0000, 0x0000, 0x0000 }, /* R372 */
+ { 0x0000, 0x0000, 0x0000 }, /* R373 */
+ { 0x0000, 0x0000, 0x0000 }, /* R374 */
+ { 0x0000, 0x0000, 0x0000 }, /* R375 */
+ { 0x0000, 0x0000, 0x0000 }, /* R376 */
+ { 0x0000, 0x0000, 0x0000 }, /* R377 */
+ { 0x0000, 0x0000, 0x0000 }, /* R378 */
+ { 0x0000, 0x0000, 0x0000 }, /* R379 */
+ { 0x0000, 0x0000, 0x0000 }, /* R380 */
+ { 0x0000, 0x0000, 0x0000 }, /* R381 */
+ { 0x0000, 0x0000, 0x0000 }, /* R382 */
+ { 0x0000, 0x0000, 0x0000 }, /* R383 */
+ { 0x0000, 0x0000, 0x0000 }, /* R384 */
+ { 0x0000, 0x0000, 0x0000 }, /* R385 */
+ { 0x0000, 0x0000, 0x0000 }, /* R386 */
+ { 0x0000, 0x0000, 0x0000 }, /* R387 */
+ { 0x0000, 0x0000, 0x0000 }, /* R388 */
+ { 0x0000, 0x0000, 0x0000 }, /* R389 */
+ { 0x0000, 0x0000, 0x0000 }, /* R390 */
+ { 0x0000, 0x0000, 0x0000 }, /* R391 */
+ { 0x0000, 0x0000, 0x0000 }, /* R392 */
+ { 0x0000, 0x0000, 0x0000 }, /* R393 */
+ { 0x0000, 0x0000, 0x0000 }, /* R394 */
+ { 0x0000, 0x0000, 0x0000 }, /* R395 */
+ { 0x0000, 0x0000, 0x0000 }, /* R396 */
+ { 0x0000, 0x0000, 0x0000 }, /* R397 */
+ { 0x0000, 0x0000, 0x0000 }, /* R398 */
+ { 0x0000, 0x0000, 0x0000 }, /* R399 */
+ { 0x0000, 0x0000, 0x0000 }, /* R400 */
+ { 0x0000, 0x0000, 0x0000 }, /* R401 */
+ { 0x0000, 0x0000, 0x0000 }, /* R402 */
+ { 0x0000, 0x0000, 0x0000 }, /* R403 */
+ { 0x0000, 0x0000, 0x0000 }, /* R404 */
+ { 0x0000, 0x0000, 0x0000 }, /* R405 */
+ { 0x0000, 0x0000, 0x0000 }, /* R406 */
+ { 0x0000, 0x0000, 0x0000 }, /* R407 */
+ { 0x0000, 0x0000, 0x0000 }, /* R408 */
+ { 0x0000, 0x0000, 0x0000 }, /* R409 */
+ { 0x0000, 0x0000, 0x0000 }, /* R410 */
+ { 0x0000, 0x0000, 0x0000 }, /* R411 */
+ { 0x0000, 0x0000, 0x0000 }, /* R412 */
+ { 0x0000, 0x0000, 0x0000 }, /* R413 */
+ { 0x0000, 0x0000, 0x0000 }, /* R414 */
+ { 0x0000, 0x0000, 0x0000 }, /* R415 */
+ { 0x0000, 0x0000, 0x0000 }, /* R416 */
+ { 0x0000, 0x0000, 0x0000 }, /* R417 */
+ { 0x0000, 0x0000, 0x0000 }, /* R418 */
+ { 0x0000, 0x0000, 0x0000 }, /* R419 */
+ { 0x0000, 0x0000, 0x0000 }, /* R420 */
+ { 0x0000, 0x0000, 0x0000 }, /* R421 */
+ { 0x0000, 0x0000, 0x0000 }, /* R422 */
+ { 0x0000, 0x0000, 0x0000 }, /* R423 */
+ { 0x0000, 0x0000, 0x0000 }, /* R424 */
+ { 0x0000, 0x0000, 0x0000 }, /* R425 */
+ { 0x0000, 0x0000, 0x0000 }, /* R426 */
+ { 0x0000, 0x0000, 0x0000 }, /* R427 */
+ { 0x0000, 0x0000, 0x0000 }, /* R428 */
+ { 0x0000, 0x0000, 0x0000 }, /* R429 */
+ { 0x0000, 0x0000, 0x0000 }, /* R430 */
+ { 0x0000, 0x0000, 0x0000 }, /* R431 */
+ { 0x0000, 0x0000, 0x0000 }, /* R432 */
+ { 0x0000, 0x0000, 0x0000 }, /* R433 */
+ { 0x0000, 0x0000, 0x0000 }, /* R434 */
+ { 0x0000, 0x0000, 0x0000 }, /* R435 */
+ { 0x0000, 0x0000, 0x0000 }, /* R436 */
+ { 0x0000, 0x0000, 0x0000 }, /* R437 */
+ { 0x0000, 0x0000, 0x0000 }, /* R438 */
+ { 0x0000, 0x0000, 0x0000 }, /* R439 */
+ { 0x0000, 0x0000, 0x0000 }, /* R440 */
+ { 0x0000, 0x0000, 0x0000 }, /* R441 */
+ { 0x0000, 0x0000, 0x0000 }, /* R442 */
+ { 0x0000, 0x0000, 0x0000 }, /* R443 */
+ { 0x0000, 0x0000, 0x0000 }, /* R444 */
+ { 0x0000, 0x0000, 0x0000 }, /* R445 */
+ { 0x0000, 0x0000, 0x0000 }, /* R446 */
+ { 0x0000, 0x0000, 0x0000 }, /* R447 */
+ { 0x0000, 0x0000, 0x0000 }, /* R448 */
+ { 0x0000, 0x0000, 0x0000 }, /* R449 */
+ { 0x0000, 0x0000, 0x0000 }, /* R450 */
+ { 0x0000, 0x0000, 0x0000 }, /* R451 */
+ { 0x0000, 0x0000, 0x0000 }, /* R452 */
+ { 0x0000, 0x0000, 0x0000 }, /* R453 */
+ { 0x0000, 0x0000, 0x0000 }, /* R454 */
+ { 0x0000, 0x0000, 0x0000 }, /* R455 */
+ { 0x0000, 0x0000, 0x0000 }, /* R456 */
+ { 0x0000, 0x0000, 0x0000 }, /* R457 */
+ { 0x0000, 0x0000, 0x0000 }, /* R458 */
+ { 0x0000, 0x0000, 0x0000 }, /* R459 */
+ { 0x0000, 0x0000, 0x0000 }, /* R460 */
+ { 0x0000, 0x0000, 0x0000 }, /* R461 */
+ { 0x0000, 0x0000, 0x0000 }, /* R462 */
+ { 0x0000, 0x0000, 0x0000 }, /* R463 */
+ { 0x0000, 0x0000, 0x0000 }, /* R464 */
+ { 0x0000, 0x0000, 0x0000 }, /* R465 */
+ { 0x0000, 0x0000, 0x0000 }, /* R466 */
+ { 0x0000, 0x0000, 0x0000 }, /* R467 */
+ { 0x0000, 0x0000, 0x0000 }, /* R468 */
+ { 0x0000, 0x0000, 0x0000 }, /* R469 */
+ { 0x0000, 0x0000, 0x0000 }, /* R470 */
+ { 0x0000, 0x0000, 0x0000 }, /* R471 */
+ { 0x0000, 0x0000, 0x0000 }, /* R472 */
+ { 0x0000, 0x0000, 0x0000 }, /* R473 */
+ { 0x0000, 0x0000, 0x0000 }, /* R474 */
+ { 0x0000, 0x0000, 0x0000 }, /* R475 */
+ { 0x0000, 0x0000, 0x0000 }, /* R476 */
+ { 0x0000, 0x0000, 0x0000 }, /* R477 */
+ { 0x0000, 0x0000, 0x0000 }, /* R478 */
+ { 0x0000, 0x0000, 0x0000 }, /* R479 */
+ { 0x0000, 0x0000, 0x0000 }, /* R480 */
+ { 0x0000, 0x0000, 0x0000 }, /* R481 */
+ { 0x0000, 0x0000, 0x0000 }, /* R482 */
+ { 0x0000, 0x0000, 0x0000 }, /* R483 */
+ { 0x0000, 0x0000, 0x0000 }, /* R484 */
+ { 0x0000, 0x0000, 0x0000 }, /* R485 */
+ { 0x0000, 0x0000, 0x0000 }, /* R486 */
+ { 0x0000, 0x0000, 0x0000 }, /* R487 */
+ { 0x0000, 0x0000, 0x0000 }, /* R488 */
+ { 0x0000, 0x0000, 0x0000 }, /* R489 */
+ { 0x0000, 0x0000, 0x0000 }, /* R490 */
+ { 0x0000, 0x0000, 0x0000 }, /* R491 */
+ { 0x0000, 0x0000, 0x0000 }, /* R492 */
+ { 0x0000, 0x0000, 0x0000 }, /* R493 */
+ { 0x0000, 0x0000, 0x0000 }, /* R494 */
+ { 0x0000, 0x0000, 0x0000 }, /* R495 */
+ { 0x0000, 0x0000, 0x0000 }, /* R496 */
+ { 0x0000, 0x0000, 0x0000 }, /* R497 */
+ { 0x0000, 0x0000, 0x0000 }, /* R498 */
+ { 0x0000, 0x0000, 0x0000 }, /* R499 */
+ { 0x0000, 0x0000, 0x0000 }, /* R500 */
+ { 0x0000, 0x0000, 0x0000 }, /* R501 */
+ { 0x0000, 0x0000, 0x0000 }, /* R502 */
+ { 0x0000, 0x0000, 0x0000 }, /* R503 */
+ { 0x0000, 0x0000, 0x0000 }, /* R504 */
+ { 0x0000, 0x0000, 0x0000 }, /* R505 */
+ { 0x0000, 0x0000, 0x0000 }, /* R506 */
+ { 0x0000, 0x0000, 0x0000 }, /* R507 */
+ { 0x0000, 0x0000, 0x0000 }, /* R508 */
+ { 0x0000, 0x0000, 0x0000 }, /* R509 */
+ { 0x0000, 0x0000, 0x0000 }, /* R510 */
+ { 0x0000, 0x0000, 0x0000 }, /* R511 */
+ { 0x001F, 0x001F, 0x0000 }, /* R512 - AIF1 Clocking (1) */
+ { 0x003F, 0x003F, 0x0000 }, /* R513 - AIF1 Clocking (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R514 */
+ { 0x0000, 0x0000, 0x0000 }, /* R515 */
+ { 0x001F, 0x001F, 0x0000 }, /* R516 - AIF2 Clocking (1) */
+ { 0x003F, 0x003F, 0x0000 }, /* R517 - AIF2 Clocking (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R518 */
+ { 0x0000, 0x0000, 0x0000 }, /* R519 */
+ { 0x001F, 0x001F, 0x0000 }, /* R520 - Clocking (1) */
+ { 0x0777, 0x0777, 0x0000 }, /* R521 - Clocking (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R522 */
+ { 0x0000, 0x0000, 0x0000 }, /* R523 */
+ { 0x0000, 0x0000, 0x0000 }, /* R524 */
+ { 0x0000, 0x0000, 0x0000 }, /* R525 */
+ { 0x0000, 0x0000, 0x0000 }, /* R526 */
+ { 0x0000, 0x0000, 0x0000 }, /* R527 */
+ { 0x00FF, 0x00FF, 0x0000 }, /* R528 - AIF1 Rate */
+ { 0x00FF, 0x00FF, 0x0000 }, /* R529 - AIF2 Rate */
+ { 0x000F, 0x0000, 0x0000 }, /* R530 - Rate Status */
+ { 0x0000, 0x0000, 0x0000 }, /* R531 */
+ { 0x0000, 0x0000, 0x0000 }, /* R532 */
+ { 0x0000, 0x0000, 0x0000 }, /* R533 */
+ { 0x0000, 0x0000, 0x0000 }, /* R534 */
+ { 0x0000, 0x0000, 0x0000 }, /* R535 */
+ { 0x0000, 0x0000, 0x0000 }, /* R536 */
+ { 0x0000, 0x0000, 0x0000 }, /* R537 */
+ { 0x0000, 0x0000, 0x0000 }, /* R538 */
+ { 0x0000, 0x0000, 0x0000 }, /* R539 */
+ { 0x0000, 0x0000, 0x0000 }, /* R540 */
+ { 0x0000, 0x0000, 0x0000 }, /* R541 */
+ { 0x0000, 0x0000, 0x0000 }, /* R542 */
+ { 0x0000, 0x0000, 0x0000 }, /* R543 */
+ { 0x0007, 0x0007, 0x0000 }, /* R544 - FLL1 Control (1) */
+ { 0x3F77, 0x3F77, 0x0000 }, /* R545 - FLL1 Control (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R546 - FLL1 Control (3) */
+ { 0x7FEF, 0x7FEF, 0x0000 }, /* R547 - FLL1 Control (4) */
+ { 0x1FDB, 0x1FDB, 0x0000 }, /* R548 - FLL1 Control (5) */
+ { 0x0000, 0x0000, 0x0000 }, /* R549 */
+ { 0x0000, 0x0000, 0x0000 }, /* R550 */
+ { 0x0000, 0x0000, 0x0000 }, /* R551 */
+ { 0x0000, 0x0000, 0x0000 }, /* R552 */
+ { 0x0000, 0x0000, 0x0000 }, /* R553 */
+ { 0x0000, 0x0000, 0x0000 }, /* R554 */
+ { 0x0000, 0x0000, 0x0000 }, /* R555 */
+ { 0x0000, 0x0000, 0x0000 }, /* R556 */
+ { 0x0000, 0x0000, 0x0000 }, /* R557 */
+ { 0x0000, 0x0000, 0x0000 }, /* R558 */
+ { 0x0000, 0x0000, 0x0000 }, /* R559 */
+ { 0x0000, 0x0000, 0x0000 }, /* R560 */
+ { 0x0000, 0x0000, 0x0000 }, /* R561 */
+ { 0x0000, 0x0000, 0x0000 }, /* R562 */
+ { 0x0000, 0x0000, 0x0000 }, /* R563 */
+ { 0x0000, 0x0000, 0x0000 }, /* R564 */
+ { 0x0000, 0x0000, 0x0000 }, /* R565 */
+ { 0x0000, 0x0000, 0x0000 }, /* R566 */
+ { 0x0000, 0x0000, 0x0000 }, /* R567 */
+ { 0x0000, 0x0000, 0x0000 }, /* R568 */
+ { 0x0000, 0x0000, 0x0000 }, /* R569 */
+ { 0x0000, 0x0000, 0x0000 }, /* R570 */
+ { 0x0000, 0x0000, 0x0000 }, /* R571 */
+ { 0x0000, 0x0000, 0x0000 }, /* R572 */
+ { 0x0000, 0x0000, 0x0000 }, /* R573 */
+ { 0x0000, 0x0000, 0x0000 }, /* R574 */
+ { 0x0000, 0x0000, 0x0000 }, /* R575 */
+ { 0x0007, 0x0007, 0x0000 }, /* R576 - FLL2 Control (1) */
+ { 0x3F77, 0x3F77, 0x0000 }, /* R577 - FLL2 Control (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R578 - FLL2 Control (3) */
+ { 0x7FEF, 0x7FEF, 0x0000 }, /* R579 - FLL2 Control (4) */
+ { 0x1FDB, 0x1FDB, 0x0000 }, /* R580 - FLL2 Control (5) */
+ { 0x0000, 0x0000, 0x0000 }, /* R581 */
+ { 0x0000, 0x0000, 0x0000 }, /* R582 */
+ { 0x0000, 0x0000, 0x0000 }, /* R583 */
+ { 0x0000, 0x0000, 0x0000 }, /* R584 */
+ { 0x0000, 0x0000, 0x0000 }, /* R585 */
+ { 0x0000, 0x0000, 0x0000 }, /* R586 */
+ { 0x0000, 0x0000, 0x0000 }, /* R587 */
+ { 0x0000, 0x0000, 0x0000 }, /* R588 */
+ { 0x0000, 0x0000, 0x0000 }, /* R589 */
+ { 0x0000, 0x0000, 0x0000 }, /* R590 */
+ { 0x0000, 0x0000, 0x0000 }, /* R591 */
+ { 0x0000, 0x0000, 0x0000 }, /* R592 */
+ { 0x0000, 0x0000, 0x0000 }, /* R593 */
+ { 0x0000, 0x0000, 0x0000 }, /* R594 */
+ { 0x0000, 0x0000, 0x0000 }, /* R595 */
+ { 0x0000, 0x0000, 0x0000 }, /* R596 */
+ { 0x0000, 0x0000, 0x0000 }, /* R597 */
+ { 0x0000, 0x0000, 0x0000 }, /* R598 */
+ { 0x0000, 0x0000, 0x0000 }, /* R599 */
+ { 0x0000, 0x0000, 0x0000 }, /* R600 */
+ { 0x0000, 0x0000, 0x0000 }, /* R601 */
+ { 0x0000, 0x0000, 0x0000 }, /* R602 */
+ { 0x0000, 0x0000, 0x0000 }, /* R603 */
+ { 0x0000, 0x0000, 0x0000 }, /* R604 */
+ { 0x0000, 0x0000, 0x0000 }, /* R605 */
+ { 0x0000, 0x0000, 0x0000 }, /* R606 */
+ { 0x0000, 0x0000, 0x0000 }, /* R607 */
+ { 0x0000, 0x0000, 0x0000 }, /* R608 */
+ { 0x0000, 0x0000, 0x0000 }, /* R609 */
+ { 0x0000, 0x0000, 0x0000 }, /* R610 */
+ { 0x0000, 0x0000, 0x0000 }, /* R611 */
+ { 0x0000, 0x0000, 0x0000 }, /* R612 */
+ { 0x0000, 0x0000, 0x0000 }, /* R613 */
+ { 0x0000, 0x0000, 0x0000 }, /* R614 */
+ { 0x0000, 0x0000, 0x0000 }, /* R615 */
+ { 0x0000, 0x0000, 0x0000 }, /* R616 */
+ { 0x0000, 0x0000, 0x0000 }, /* R617 */
+ { 0x0000, 0x0000, 0x0000 }, /* R618 */
+ { 0x0000, 0x0000, 0x0000 }, /* R619 */
+ { 0x0000, 0x0000, 0x0000 }, /* R620 */
+ { 0x0000, 0x0000, 0x0000 }, /* R621 */
+ { 0x0000, 0x0000, 0x0000 }, /* R622 */
+ { 0x0000, 0x0000, 0x0000 }, /* R623 */
+ { 0x0000, 0x0000, 0x0000 }, /* R624 */
+ { 0x0000, 0x0000, 0x0000 }, /* R625 */
+ { 0x0000, 0x0000, 0x0000 }, /* R626 */
+ { 0x0000, 0x0000, 0x0000 }, /* R627 */
+ { 0x0000, 0x0000, 0x0000 }, /* R628 */
+ { 0x0000, 0x0000, 0x0000 }, /* R629 */
+ { 0x0000, 0x0000, 0x0000 }, /* R630 */
+ { 0x0000, 0x0000, 0x0000 }, /* R631 */
+ { 0x0000, 0x0000, 0x0000 }, /* R632 */
+ { 0x0000, 0x0000, 0x0000 }, /* R633 */
+ { 0x0000, 0x0000, 0x0000 }, /* R634 */
+ { 0x0000, 0x0000, 0x0000 }, /* R635 */
+ { 0x0000, 0x0000, 0x0000 }, /* R636 */
+ { 0x0000, 0x0000, 0x0000 }, /* R637 */
+ { 0x0000, 0x0000, 0x0000 }, /* R638 */
+ { 0x0000, 0x0000, 0x0000 }, /* R639 */
+ { 0x0000, 0x0000, 0x0000 }, /* R640 */
+ { 0x0000, 0x0000, 0x0000 }, /* R641 */
+ { 0x0000, 0x0000, 0x0000 }, /* R642 */
+ { 0x0000, 0x0000, 0x0000 }, /* R643 */
+ { 0x0000, 0x0000, 0x0000 }, /* R644 */
+ { 0x0000, 0x0000, 0x0000 }, /* R645 */
+ { 0x0000, 0x0000, 0x0000 }, /* R646 */
+ { 0x0000, 0x0000, 0x0000 }, /* R647 */
+ { 0x0000, 0x0000, 0x0000 }, /* R648 */
+ { 0x0000, 0x0000, 0x0000 }, /* R649 */
+ { 0x0000, 0x0000, 0x0000 }, /* R650 */
+ { 0x0000, 0x0000, 0x0000 }, /* R651 */
+ { 0x0000, 0x0000, 0x0000 }, /* R652 */
+ { 0x0000, 0x0000, 0x0000 }, /* R653 */
+ { 0x0000, 0x0000, 0x0000 }, /* R654 */
+ { 0x0000, 0x0000, 0x0000 }, /* R655 */
+ { 0x0000, 0x0000, 0x0000 }, /* R656 */
+ { 0x0000, 0x0000, 0x0000 }, /* R657 */
+ { 0x0000, 0x0000, 0x0000 }, /* R658 */
+ { 0x0000, 0x0000, 0x0000 }, /* R659 */
+ { 0x0000, 0x0000, 0x0000 }, /* R660 */
+ { 0x0000, 0x0000, 0x0000 }, /* R661 */
+ { 0x0000, 0x0000, 0x0000 }, /* R662 */
+ { 0x0000, 0x0000, 0x0000 }, /* R663 */
+ { 0x0000, 0x0000, 0x0000 }, /* R664 */
+ { 0x0000, 0x0000, 0x0000 }, /* R665 */
+ { 0x0000, 0x0000, 0x0000 }, /* R666 */
+ { 0x0000, 0x0000, 0x0000 }, /* R667 */
+ { 0x0000, 0x0000, 0x0000 }, /* R668 */
+ { 0x0000, 0x0000, 0x0000 }, /* R669 */
+ { 0x0000, 0x0000, 0x0000 }, /* R670 */
+ { 0x0000, 0x0000, 0x0000 }, /* R671 */
+ { 0x0000, 0x0000, 0x0000 }, /* R672 */
+ { 0x0000, 0x0000, 0x0000 }, /* R673 */
+ { 0x0000, 0x0000, 0x0000 }, /* R674 */
+ { 0x0000, 0x0000, 0x0000 }, /* R675 */
+ { 0x0000, 0x0000, 0x0000 }, /* R676 */
+ { 0x0000, 0x0000, 0x0000 }, /* R677 */
+ { 0x0000, 0x0000, 0x0000 }, /* R678 */
+ { 0x0000, 0x0000, 0x0000 }, /* R679 */
+ { 0x0000, 0x0000, 0x0000 }, /* R680 */
+ { 0x0000, 0x0000, 0x0000 }, /* R681 */
+ { 0x0000, 0x0000, 0x0000 }, /* R682 */
+ { 0x0000, 0x0000, 0x0000 }, /* R683 */
+ { 0x0000, 0x0000, 0x0000 }, /* R684 */
+ { 0x0000, 0x0000, 0x0000 }, /* R685 */
+ { 0x0000, 0x0000, 0x0000 }, /* R686 */
+ { 0x0000, 0x0000, 0x0000 }, /* R687 */
+ { 0x0000, 0x0000, 0x0000 }, /* R688 */
+ { 0x0000, 0x0000, 0x0000 }, /* R689 */
+ { 0x0000, 0x0000, 0x0000 }, /* R690 */
+ { 0x0000, 0x0000, 0x0000 }, /* R691 */
+ { 0x0000, 0x0000, 0x0000 }, /* R692 */
+ { 0x0000, 0x0000, 0x0000 }, /* R693 */
+ { 0x0000, 0x0000, 0x0000 }, /* R694 */
+ { 0x0000, 0x0000, 0x0000 }, /* R695 */
+ { 0x0000, 0x0000, 0x0000 }, /* R696 */
+ { 0x0000, 0x0000, 0x0000 }, /* R697 */
+ { 0x0000, 0x0000, 0x0000 }, /* R698 */
+ { 0x0000, 0x0000, 0x0000 }, /* R699 */
+ { 0x0000, 0x0000, 0x0000 }, /* R700 */
+ { 0x0000, 0x0000, 0x0000 }, /* R701 */
+ { 0x0000, 0x0000, 0x0000 }, /* R702 */
+ { 0x0000, 0x0000, 0x0000 }, /* R703 */
+ { 0x0000, 0x0000, 0x0000 }, /* R704 */
+ { 0x0000, 0x0000, 0x0000 }, /* R705 */
+ { 0x0000, 0x0000, 0x0000 }, /* R706 */
+ { 0x0000, 0x0000, 0x0000 }, /* R707 */
+ { 0x0000, 0x0000, 0x0000 }, /* R708 */
+ { 0x0000, 0x0000, 0x0000 }, /* R709 */
+ { 0x0000, 0x0000, 0x0000 }, /* R710 */
+ { 0x0000, 0x0000, 0x0000 }, /* R711 */
+ { 0x0000, 0x0000, 0x0000 }, /* R712 */
+ { 0x0000, 0x0000, 0x0000 }, /* R713 */
+ { 0x0000, 0x0000, 0x0000 }, /* R714 */
+ { 0x0000, 0x0000, 0x0000 }, /* R715 */
+ { 0x0000, 0x0000, 0x0000 }, /* R716 */
+ { 0x0000, 0x0000, 0x0000 }, /* R717 */
+ { 0x0000, 0x0000, 0x0000 }, /* R718 */
+ { 0x0000, 0x0000, 0x0000 }, /* R719 */
+ { 0x0000, 0x0000, 0x0000 }, /* R720 */
+ { 0x0000, 0x0000, 0x0000 }, /* R721 */
+ { 0x0000, 0x0000, 0x0000 }, /* R722 */
+ { 0x0000, 0x0000, 0x0000 }, /* R723 */
+ { 0x0000, 0x0000, 0x0000 }, /* R724 */
+ { 0x0000, 0x0000, 0x0000 }, /* R725 */
+ { 0x0000, 0x0000, 0x0000 }, /* R726 */
+ { 0x0000, 0x0000, 0x0000 }, /* R727 */
+ { 0x0000, 0x0000, 0x0000 }, /* R728 */
+ { 0x0000, 0x0000, 0x0000 }, /* R729 */
+ { 0x0000, 0x0000, 0x0000 }, /* R730 */
+ { 0x0000, 0x0000, 0x0000 }, /* R731 */
+ { 0x0000, 0x0000, 0x0000 }, /* R732 */
+ { 0x0000, 0x0000, 0x0000 }, /* R733 */
+ { 0x0000, 0x0000, 0x0000 }, /* R734 */
+ { 0x0000, 0x0000, 0x0000 }, /* R735 */
+ { 0x0000, 0x0000, 0x0000 }, /* R736 */
+ { 0x0000, 0x0000, 0x0000 }, /* R737 */
+ { 0x0000, 0x0000, 0x0000 }, /* R738 */
+ { 0x0000, 0x0000, 0x0000 }, /* R739 */
+ { 0x0000, 0x0000, 0x0000 }, /* R740 */
+ { 0x0000, 0x0000, 0x0000 }, /* R741 */
+ { 0x0000, 0x0000, 0x0000 }, /* R742 */
+ { 0x0000, 0x0000, 0x0000 }, /* R743 */
+ { 0x0000, 0x0000, 0x0000 }, /* R744 */
+ { 0x0000, 0x0000, 0x0000 }, /* R745 */
+ { 0x0000, 0x0000, 0x0000 }, /* R746 */
+ { 0x0000, 0x0000, 0x0000 }, /* R747 */
+ { 0x0000, 0x0000, 0x0000 }, /* R748 */
+ { 0x0000, 0x0000, 0x0000 }, /* R749 */
+ { 0x0000, 0x0000, 0x0000 }, /* R750 */
+ { 0x0000, 0x0000, 0x0000 }, /* R751 */
+ { 0x0000, 0x0000, 0x0000 }, /* R752 */
+ { 0x0000, 0x0000, 0x0000 }, /* R753 */
+ { 0x0000, 0x0000, 0x0000 }, /* R754 */
+ { 0x0000, 0x0000, 0x0000 }, /* R755 */
+ { 0x0000, 0x0000, 0x0000 }, /* R756 */
+ { 0x0000, 0x0000, 0x0000 }, /* R757 */
+ { 0x0000, 0x0000, 0x0000 }, /* R758 */
+ { 0x0000, 0x0000, 0x0000 }, /* R759 */
+ { 0x0000, 0x0000, 0x0000 }, /* R760 */
+ { 0x0000, 0x0000, 0x0000 }, /* R761 */
+ { 0x0000, 0x0000, 0x0000 }, /* R762 */
+ { 0x0000, 0x0000, 0x0000 }, /* R763 */
+ { 0x0000, 0x0000, 0x0000 }, /* R764 */
+ { 0x0000, 0x0000, 0x0000 }, /* R765 */
+ { 0x0000, 0x0000, 0x0000 }, /* R766 */
+ { 0x0000, 0x0000, 0x0000 }, /* R767 */
+ { 0xE1F8, 0xE1F8, 0x0000 }, /* R768 - AIF1 Control (1) */
+ { 0xCD1F, 0xCD1F, 0x0000 }, /* R769 - AIF1 Control (2) */
+ { 0xF000, 0xF000, 0x0000 }, /* R770 - AIF1 Master/Slave */
+ { 0x01F0, 0x01F0, 0x0000 }, /* R771 - AIF1 BCLK */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R772 - AIF1ADC LRCLK */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R773 - AIF1DAC LRCLK */
+ { 0x0003, 0x0003, 0x0000 }, /* R774 - AIF1DAC Data */
+ { 0x0003, 0x0003, 0x0000 }, /* R775 - AIF1ADC Data */
+ { 0x0000, 0x0000, 0x0000 }, /* R776 */
+ { 0x0000, 0x0000, 0x0000 }, /* R777 */
+ { 0x0000, 0x0000, 0x0000 }, /* R778 */
+ { 0x0000, 0x0000, 0x0000 }, /* R779 */
+ { 0x0000, 0x0000, 0x0000 }, /* R780 */
+ { 0x0000, 0x0000, 0x0000 }, /* R781 */
+ { 0x0000, 0x0000, 0x0000 }, /* R782 */
+ { 0x0000, 0x0000, 0x0000 }, /* R783 */
+ { 0xF1F8, 0xF1F8, 0x0000 }, /* R784 - AIF2 Control (1) */
+ { 0xFD1F, 0xFD1F, 0x0000 }, /* R785 - AIF2 Control (2) */
+ { 0xF000, 0xF000, 0x0000 }, /* R786 - AIF2 Master/Slave */
+ { 0x01F0, 0x01F0, 0x0000 }, /* R787 - AIF2 BCLK */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R788 - AIF2ADC LRCLK */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R789 - AIF2DAC LRCLK */
+ { 0x0003, 0x0003, 0x0000 }, /* R790 - AIF2DAC Data */
+ { 0x0003, 0x0003, 0x0000 }, /* R791 - AIF2ADC Data */
+ { 0x0000, 0x0000, 0x0000 }, /* R792 */
+ { 0x0000, 0x0000, 0x0000 }, /* R793 */
+ { 0x0000, 0x0000, 0x0000 }, /* R794 */
+ { 0x0000, 0x0000, 0x0000 }, /* R795 */
+ { 0x0000, 0x0000, 0x0000 }, /* R796 */
+ { 0x0000, 0x0000, 0x0000 }, /* R797 */
+ { 0x0000, 0x0000, 0x0000 }, /* R798 */
+ { 0x0000, 0x0000, 0x0000 }, /* R799 */
+ { 0x0000, 0x0000, 0x0000 }, /* R800 */
+ { 0x0000, 0x0000, 0x0000 }, /* R801 */
+ { 0x0000, 0x0000, 0x0000 }, /* R802 */
+ { 0x0000, 0x0000, 0x0000 }, /* R803 */
+ { 0x0000, 0x0000, 0x0000 }, /* R804 */
+ { 0x0000, 0x0000, 0x0000 }, /* R805 */
+ { 0x0000, 0x0000, 0x0000 }, /* R806 */
+ { 0x0000, 0x0000, 0x0000 }, /* R807 */
+ { 0x0000, 0x0000, 0x0000 }, /* R808 */
+ { 0x0000, 0x0000, 0x0000 }, /* R809 */
+ { 0x0000, 0x0000, 0x0000 }, /* R810 */
+ { 0x0000, 0x0000, 0x0000 }, /* R811 */
+ { 0x0000, 0x0000, 0x0000 }, /* R812 */
+ { 0x0000, 0x0000, 0x0000 }, /* R813 */
+ { 0x0000, 0x0000, 0x0000 }, /* R814 */
+ { 0x0000, 0x0000, 0x0000 }, /* R815 */
+ { 0x0000, 0x0000, 0x0000 }, /* R816 */
+ { 0x0000, 0x0000, 0x0000 }, /* R817 */
+ { 0x0000, 0x0000, 0x0000 }, /* R818 */
+ { 0x0000, 0x0000, 0x0000 }, /* R819 */
+ { 0x0000, 0x0000, 0x0000 }, /* R820 */
+ { 0x0000, 0x0000, 0x0000 }, /* R821 */
+ { 0x0000, 0x0000, 0x0000 }, /* R822 */
+ { 0x0000, 0x0000, 0x0000 }, /* R823 */
+ { 0x0000, 0x0000, 0x0000 }, /* R824 */
+ { 0x0000, 0x0000, 0x0000 }, /* R825 */
+ { 0x0000, 0x0000, 0x0000 }, /* R826 */
+ { 0x0000, 0x0000, 0x0000 }, /* R827 */
+ { 0x0000, 0x0000, 0x0000 }, /* R828 */
+ { 0x0000, 0x0000, 0x0000 }, /* R829 */
+ { 0x0000, 0x0000, 0x0000 }, /* R830 */
+ { 0x0000, 0x0000, 0x0000 }, /* R831 */
+ { 0x0000, 0x0000, 0x0000 }, /* R832 */
+ { 0x0000, 0x0000, 0x0000 }, /* R833 */
+ { 0x0000, 0x0000, 0x0000 }, /* R834 */
+ { 0x0000, 0x0000, 0x0000 }, /* R835 */
+ { 0x0000, 0x0000, 0x0000 }, /* R836 */
+ { 0x0000, 0x0000, 0x0000 }, /* R837 */
+ { 0x0000, 0x0000, 0x0000 }, /* R838 */
+ { 0x0000, 0x0000, 0x0000 }, /* R839 */
+ { 0x0000, 0x0000, 0x0000 }, /* R840 */
+ { 0x0000, 0x0000, 0x0000 }, /* R841 */
+ { 0x0000, 0x0000, 0x0000 }, /* R842 */
+ { 0x0000, 0x0000, 0x0000 }, /* R843 */
+ { 0x0000, 0x0000, 0x0000 }, /* R844 */
+ { 0x0000, 0x0000, 0x0000 }, /* R845 */
+ { 0x0000, 0x0000, 0x0000 }, /* R846 */
+ { 0x0000, 0x0000, 0x0000 }, /* R847 */
+ { 0x0000, 0x0000, 0x0000 }, /* R848 */
+ { 0x0000, 0x0000, 0x0000 }, /* R849 */
+ { 0x0000, 0x0000, 0x0000 }, /* R850 */
+ { 0x0000, 0x0000, 0x0000 }, /* R851 */
+ { 0x0000, 0x0000, 0x0000 }, /* R852 */
+ { 0x0000, 0x0000, 0x0000 }, /* R853 */
+ { 0x0000, 0x0000, 0x0000 }, /* R854 */
+ { 0x0000, 0x0000, 0x0000 }, /* R855 */
+ { 0x0000, 0x0000, 0x0000 }, /* R856 */
+ { 0x0000, 0x0000, 0x0000 }, /* R857 */
+ { 0x0000, 0x0000, 0x0000 }, /* R858 */
+ { 0x0000, 0x0000, 0x0000 }, /* R859 */
+ { 0x0000, 0x0000, 0x0000 }, /* R860 */
+ { 0x0000, 0x0000, 0x0000 }, /* R861 */
+ { 0x0000, 0x0000, 0x0000 }, /* R862 */
+ { 0x0000, 0x0000, 0x0000 }, /* R863 */
+ { 0x0000, 0x0000, 0x0000 }, /* R864 */
+ { 0x0000, 0x0000, 0x0000 }, /* R865 */
+ { 0x0000, 0x0000, 0x0000 }, /* R866 */
+ { 0x0000, 0x0000, 0x0000 }, /* R867 */
+ { 0x0000, 0x0000, 0x0000 }, /* R868 */
+ { 0x0000, 0x0000, 0x0000 }, /* R869 */
+ { 0x0000, 0x0000, 0x0000 }, /* R870 */
+ { 0x0000, 0x0000, 0x0000 }, /* R871 */
+ { 0x0000, 0x0000, 0x0000 }, /* R872 */
+ { 0x0000, 0x0000, 0x0000 }, /* R873 */
+ { 0x0000, 0x0000, 0x0000 }, /* R874 */
+ { 0x0000, 0x0000, 0x0000 }, /* R875 */
+ { 0x0000, 0x0000, 0x0000 }, /* R876 */
+ { 0x0000, 0x0000, 0x0000 }, /* R877 */
+ { 0x0000, 0x0000, 0x0000 }, /* R878 */
+ { 0x0000, 0x0000, 0x0000 }, /* R879 */
+ { 0x0000, 0x0000, 0x0000 }, /* R880 */
+ { 0x0000, 0x0000, 0x0000 }, /* R881 */
+ { 0x0000, 0x0000, 0x0000 }, /* R882 */
+ { 0x0000, 0x0000, 0x0000 }, /* R883 */
+ { 0x0000, 0x0000, 0x0000 }, /* R884 */
+ { 0x0000, 0x0000, 0x0000 }, /* R885 */
+ { 0x0000, 0x0000, 0x0000 }, /* R886 */
+ { 0x0000, 0x0000, 0x0000 }, /* R887 */
+ { 0x0000, 0x0000, 0x0000 }, /* R888 */
+ { 0x0000, 0x0000, 0x0000 }, /* R889 */
+ { 0x0000, 0x0000, 0x0000 }, /* R890 */
+ { 0x0000, 0x0000, 0x0000 }, /* R891 */
+ { 0x0000, 0x0000, 0x0000 }, /* R892 */
+ { 0x0000, 0x0000, 0x0000 }, /* R893 */
+ { 0x0000, 0x0000, 0x0000 }, /* R894 */
+ { 0x0000, 0x0000, 0x0000 }, /* R895 */
+ { 0x0000, 0x0000, 0x0000 }, /* R896 */
+ { 0x0000, 0x0000, 0x0000 }, /* R897 */
+ { 0x0000, 0x0000, 0x0000 }, /* R898 */
+ { 0x0000, 0x0000, 0x0000 }, /* R899 */
+ { 0x0000, 0x0000, 0x0000 }, /* R900 */
+ { 0x0000, 0x0000, 0x0000 }, /* R901 */
+ { 0x0000, 0x0000, 0x0000 }, /* R902 */
+ { 0x0000, 0x0000, 0x0000 }, /* R903 */
+ { 0x0000, 0x0000, 0x0000 }, /* R904 */
+ { 0x0000, 0x0000, 0x0000 }, /* R905 */
+ { 0x0000, 0x0000, 0x0000 }, /* R906 */
+ { 0x0000, 0x0000, 0x0000 }, /* R907 */
+ { 0x0000, 0x0000, 0x0000 }, /* R908 */
+ { 0x0000, 0x0000, 0x0000 }, /* R909 */
+ { 0x0000, 0x0000, 0x0000 }, /* R910 */
+ { 0x0000, 0x0000, 0x0000 }, /* R911 */
+ { 0x0000, 0x0000, 0x0000 }, /* R912 */
+ { 0x0000, 0x0000, 0x0000 }, /* R913 */
+ { 0x0000, 0x0000, 0x0000 }, /* R914 */
+ { 0x0000, 0x0000, 0x0000 }, /* R915 */
+ { 0x0000, 0x0000, 0x0000 }, /* R916 */
+ { 0x0000, 0x0000, 0x0000 }, /* R917 */
+ { 0x0000, 0x0000, 0x0000 }, /* R918 */
+ { 0x0000, 0x0000, 0x0000 }, /* R919 */
+ { 0x0000, 0x0000, 0x0000 }, /* R920 */
+ { 0x0000, 0x0000, 0x0000 }, /* R921 */
+ { 0x0000, 0x0000, 0x0000 }, /* R922 */
+ { 0x0000, 0x0000, 0x0000 }, /* R923 */
+ { 0x0000, 0x0000, 0x0000 }, /* R924 */
+ { 0x0000, 0x0000, 0x0000 }, /* R925 */
+ { 0x0000, 0x0000, 0x0000 }, /* R926 */
+ { 0x0000, 0x0000, 0x0000 }, /* R927 */
+ { 0x0000, 0x0000, 0x0000 }, /* R928 */
+ { 0x0000, 0x0000, 0x0000 }, /* R929 */
+ { 0x0000, 0x0000, 0x0000 }, /* R930 */
+ { 0x0000, 0x0000, 0x0000 }, /* R931 */
+ { 0x0000, 0x0000, 0x0000 }, /* R932 */
+ { 0x0000, 0x0000, 0x0000 }, /* R933 */
+ { 0x0000, 0x0000, 0x0000 }, /* R934 */
+ { 0x0000, 0x0000, 0x0000 }, /* R935 */
+ { 0x0000, 0x0000, 0x0000 }, /* R936 */
+ { 0x0000, 0x0000, 0x0000 }, /* R937 */
+ { 0x0000, 0x0000, 0x0000 }, /* R938 */
+ { 0x0000, 0x0000, 0x0000 }, /* R939 */
+ { 0x0000, 0x0000, 0x0000 }, /* R940 */
+ { 0x0000, 0x0000, 0x0000 }, /* R941 */
+ { 0x0000, 0x0000, 0x0000 }, /* R942 */
+ { 0x0000, 0x0000, 0x0000 }, /* R943 */
+ { 0x0000, 0x0000, 0x0000 }, /* R944 */
+ { 0x0000, 0x0000, 0x0000 }, /* R945 */
+ { 0x0000, 0x0000, 0x0000 }, /* R946 */
+ { 0x0000, 0x0000, 0x0000 }, /* R947 */
+ { 0x0000, 0x0000, 0x0000 }, /* R948 */
+ { 0x0000, 0x0000, 0x0000 }, /* R949 */
+ { 0x0000, 0x0000, 0x0000 }, /* R950 */
+ { 0x0000, 0x0000, 0x0000 }, /* R951 */
+ { 0x0000, 0x0000, 0x0000 }, /* R952 */
+ { 0x0000, 0x0000, 0x0000 }, /* R953 */
+ { 0x0000, 0x0000, 0x0000 }, /* R954 */
+ { 0x0000, 0x0000, 0x0000 }, /* R955 */
+ { 0x0000, 0x0000, 0x0000 }, /* R956 */
+ { 0x0000, 0x0000, 0x0000 }, /* R957 */
+ { 0x0000, 0x0000, 0x0000 }, /* R958 */
+ { 0x0000, 0x0000, 0x0000 }, /* R959 */
+ { 0x0000, 0x0000, 0x0000 }, /* R960 */
+ { 0x0000, 0x0000, 0x0000 }, /* R961 */
+ { 0x0000, 0x0000, 0x0000 }, /* R962 */
+ { 0x0000, 0x0000, 0x0000 }, /* R963 */
+ { 0x0000, 0x0000, 0x0000 }, /* R964 */
+ { 0x0000, 0x0000, 0x0000 }, /* R965 */
+ { 0x0000, 0x0000, 0x0000 }, /* R966 */
+ { 0x0000, 0x0000, 0x0000 }, /* R967 */
+ { 0x0000, 0x0000, 0x0000 }, /* R968 */
+ { 0x0000, 0x0000, 0x0000 }, /* R969 */
+ { 0x0000, 0x0000, 0x0000 }, /* R970 */
+ { 0x0000, 0x0000, 0x0000 }, /* R971 */
+ { 0x0000, 0x0000, 0x0000 }, /* R972 */
+ { 0x0000, 0x0000, 0x0000 }, /* R973 */
+ { 0x0000, 0x0000, 0x0000 }, /* R974 */
+ { 0x0000, 0x0000, 0x0000 }, /* R975 */
+ { 0x0000, 0x0000, 0x0000 }, /* R976 */
+ { 0x0000, 0x0000, 0x0000 }, /* R977 */
+ { 0x0000, 0x0000, 0x0000 }, /* R978 */
+ { 0x0000, 0x0000, 0x0000 }, /* R979 */
+ { 0x0000, 0x0000, 0x0000 }, /* R980 */
+ { 0x0000, 0x0000, 0x0000 }, /* R981 */
+ { 0x0000, 0x0000, 0x0000 }, /* R982 */
+ { 0x0000, 0x0000, 0x0000 }, /* R983 */
+ { 0x0000, 0x0000, 0x0000 }, /* R984 */
+ { 0x0000, 0x0000, 0x0000 }, /* R985 */
+ { 0x0000, 0x0000, 0x0000 }, /* R986 */
+ { 0x0000, 0x0000, 0x0000 }, /* R987 */
+ { 0x0000, 0x0000, 0x0000 }, /* R988 */
+ { 0x0000, 0x0000, 0x0000 }, /* R989 */
+ { 0x0000, 0x0000, 0x0000 }, /* R990 */
+ { 0x0000, 0x0000, 0x0000 }, /* R991 */
+ { 0x0000, 0x0000, 0x0000 }, /* R992 */
+ { 0x0000, 0x0000, 0x0000 }, /* R993 */
+ { 0x0000, 0x0000, 0x0000 }, /* R994 */
+ { 0x0000, 0x0000, 0x0000 }, /* R995 */
+ { 0x0000, 0x0000, 0x0000 }, /* R996 */
+ { 0x0000, 0x0000, 0x0000 }, /* R997 */
+ { 0x0000, 0x0000, 0x0000 }, /* R998 */
+ { 0x0000, 0x0000, 0x0000 }, /* R999 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1000 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1001 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1002 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1003 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1004 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1005 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1006 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1007 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1008 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1009 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1010 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1011 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1012 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1013 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1014 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1015 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1016 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1017 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1018 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1019 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1020 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1021 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1022 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1023 */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1024 - AIF1 ADC1 Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1025 - AIF1 ADC1 Right Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1026 - AIF1 DAC1 Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1027 - AIF1 DAC1 Right Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1028 - AIF1 ADC2 Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1029 - AIF1 ADC2 Right Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1030 - AIF1 DAC2 Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1031 - AIF1 DAC2 Right Volume */
+ { 0x0000, 0x0000, 0x0000 }, /* R1032 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1033 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1034 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1035 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1036 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1037 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1038 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1039 */
+ { 0xF800, 0xF800, 0x0000 }, /* R1040 - AIF1 ADC1 Filters */
+ { 0x7800, 0x7800, 0x0000 }, /* R1041 - AIF1 ADC2 Filters */
+ { 0x0000, 0x0000, 0x0000 }, /* R1042 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1043 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1044 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1045 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1046 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1047 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1048 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1049 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1050 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1051 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1052 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1053 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1054 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1055 */
+ { 0x02B6, 0x02B6, 0x0000 }, /* R1056 - AIF1 DAC1 Filters (1) */
+ { 0x3F00, 0x3F00, 0x0000 }, /* R1057 - AIF1 DAC1 Filters (2) */
+ { 0x02B6, 0x02B6, 0x0000 }, /* R1058 - AIF1 DAC2 Filters (1) */
+ { 0x3F00, 0x3F00, 0x0000 }, /* R1059 - AIF1 DAC2 Filters (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R1060 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1061 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1062 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1063 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1064 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1065 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1066 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1067 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1068 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1069 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1070 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1071 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1072 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1073 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1074 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1075 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1076 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1077 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1078 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1079 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1080 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1081 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1082 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1083 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1084 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1085 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1086 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1087 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1088 - AIF1 DRC1 (1) */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R1089 - AIF1 DRC1 (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1090 - AIF1 DRC1 (3) */
+ { 0x07FF, 0x07FF, 0x0000 }, /* R1091 - AIF1 DRC1 (4) */
+ { 0x03FF, 0x03FF, 0x0000 }, /* R1092 - AIF1 DRC1 (5) */
+ { 0x0000, 0x0000, 0x0000 }, /* R1093 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1094 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1095 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1096 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1097 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1098 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1099 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1100 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1101 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1102 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1103 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1104 - AIF1 DRC2 (1) */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R1105 - AIF1 DRC2 (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1106 - AIF1 DRC2 (3) */
+ { 0x07FF, 0x07FF, 0x0000 }, /* R1107 - AIF1 DRC2 (4) */
+ { 0x03FF, 0x03FF, 0x0000 }, /* R1108 - AIF1 DRC2 (5) */
+ { 0x0000, 0x0000, 0x0000 }, /* R1109 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1110 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1111 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1112 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1113 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1114 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1115 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1116 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1117 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1118 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1119 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1120 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1121 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1122 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1123 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1124 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1125 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1126 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1127 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1128 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1129 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1130 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1131 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1132 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1133 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1134 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1135 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1136 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1137 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1138 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1139 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1140 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1141 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1142 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1143 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1144 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1145 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1146 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1147 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1148 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1149 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1150 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1151 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1152 - AIF1 DAC1 EQ Gains (1) */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R1153 - AIF1 DAC1 EQ Gains (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1154 - AIF1 DAC1 EQ Band 1 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1155 - AIF1 DAC1 EQ Band 1 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1156 - AIF1 DAC1 EQ Band 1 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1157 - AIF1 DAC1 EQ Band 2 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1158 - AIF1 DAC1 EQ Band 2 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1159 - AIF1 DAC1 EQ Band 2 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1160 - AIF1 DAC1 EQ Band 2 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1161 - AIF1 DAC1 EQ Band 3 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1162 - AIF1 DAC1 EQ Band 3 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1163 - AIF1 DAC1 EQ Band 3 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1164 - AIF1 DAC1 EQ Band 3 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1165 - AIF1 DAC1 EQ Band 4 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1166 - AIF1 DAC1 EQ Band 4 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1167 - AIF1 DAC1 EQ Band 4 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1168 - AIF1 DAC1 EQ Band 4 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1169 - AIF1 DAC1 EQ Band 5 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1170 - AIF1 DAC1 EQ Band 5 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1171 - AIF1 DAC1 EQ Band 5 PG */
+ { 0x0000, 0x0000, 0x0000 }, /* R1172 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1173 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1174 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1175 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1176 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1177 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1178 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1179 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1180 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1181 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1182 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1183 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1184 - AIF1 DAC2 EQ Gains (1) */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R1185 - AIF1 DAC2 EQ Gains (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1186 - AIF1 DAC2 EQ Band 1 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1187 - AIF1 DAC2 EQ Band 1 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1188 - AIF1 DAC2 EQ Band 1 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1189 - AIF1 DAC2 EQ Band 2 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1190 - AIF1 DAC2 EQ Band 2 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1191 - AIF1 DAC2 EQ Band 2 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1192 - AIF1 DAC2 EQ Band 2 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1193 - AIF1 DAC2 EQ Band 3 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1194 - AIF1 DAC2 EQ Band 3 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1195 - AIF1 DAC2 EQ Band 3 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1196 - AIF1 DAC2 EQ Band 3 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1197 - AIF1 DAC2 EQ Band 4 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1198 - AIF1 DAC2 EQ Band 4 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1199 - AIF1 DAC2 EQ Band 4 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1200 - AIF1 DAC2 EQ Band 4 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1201 - AIF1 DAC2 EQ Band 5 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1202 - AIF1 DAC2 EQ Band 5 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1203 - AIF1 DAC2 EQ Band 5 PG */
+ { 0x0000, 0x0000, 0x0000 }, /* R1204 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1205 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1206 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1207 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1208 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1209 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1210 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1211 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1212 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1213 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1214 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1215 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1216 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1217 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1218 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1219 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1220 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1221 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1222 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1223 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1224 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1225 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1226 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1227 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1228 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1229 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1230 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1231 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1232 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1233 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1234 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1235 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1236 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1237 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1238 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1239 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1240 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1241 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1242 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1243 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1244 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1245 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1246 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1247 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1248 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1249 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1250 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1251 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1252 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1253 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1254 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1255 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1256 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1257 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1258 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1259 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1260 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1261 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1262 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1263 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1264 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1265 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1266 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1267 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1268 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1269 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1270 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1271 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1272 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1273 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1274 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1275 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1276 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1277 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1278 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1279 */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1280 - AIF2 ADC Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1281 - AIF2 ADC Right Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1282 - AIF2 DAC Left Volume */
+ { 0x00FF, 0x01FF, 0x0000 }, /* R1283 - AIF2 DAC Right Volume */
+ { 0x0000, 0x0000, 0x0000 }, /* R1284 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1285 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1286 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1287 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1288 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1289 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1290 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1291 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1292 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1293 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1294 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1295 */
+ { 0xF800, 0xF800, 0x0000 }, /* R1296 - AIF2 ADC Filters */
+ { 0x0000, 0x0000, 0x0000 }, /* R1297 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1298 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1299 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1300 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1301 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1302 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1303 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1304 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1305 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1306 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1307 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1308 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1309 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1310 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1311 */
+ { 0x02B6, 0x02B6, 0x0000 }, /* R1312 - AIF2 DAC Filters (1) */
+ { 0x3F00, 0x3F00, 0x0000 }, /* R1313 - AIF2 DAC Filters (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R1314 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1315 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1316 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1317 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1318 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1319 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1320 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1321 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1322 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1323 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1324 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1325 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1326 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1327 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1328 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1329 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1330 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1331 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1332 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1333 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1334 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1335 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1336 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1337 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1338 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1339 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1340 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1341 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1342 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1343 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1344 - AIF2 DRC (1) */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R1345 - AIF2 DRC (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1346 - AIF2 DRC (3) */
+ { 0x07FF, 0x07FF, 0x0000 }, /* R1347 - AIF2 DRC (4) */
+ { 0x03FF, 0x03FF, 0x0000 }, /* R1348 - AIF2 DRC (5) */
+ { 0x0000, 0x0000, 0x0000 }, /* R1349 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1350 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1351 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1352 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1353 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1354 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1355 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1356 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1357 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1358 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1359 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1360 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1361 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1362 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1363 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1364 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1365 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1366 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1367 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1368 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1369 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1370 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1371 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1372 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1373 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1374 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1375 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1376 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1377 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1378 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1379 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1380 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1381 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1382 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1383 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1384 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1385 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1386 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1387 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1388 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1389 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1390 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1391 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1392 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1393 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1394 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1395 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1396 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1397 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1398 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1399 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1400 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1401 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1402 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1403 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1404 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1405 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1406 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1407 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1408 - AIF2 EQ Gains (1) */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R1409 - AIF2 EQ Gains (2) */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1410 - AIF2 EQ Band 1 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1411 - AIF2 EQ Band 1 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1412 - AIF2 EQ Band 1 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1413 - AIF2 EQ Band 2 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1414 - AIF2 EQ Band 2 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1415 - AIF2 EQ Band 2 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1416 - AIF2 EQ Band 2 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1417 - AIF2 EQ Band 3 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1418 - AIF2 EQ Band 3 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1419 - AIF2 EQ Band 3 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1420 - AIF2 EQ Band 3 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1421 - AIF2 EQ Band 4 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1422 - AIF2 EQ Band 4 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1423 - AIF2 EQ Band 4 C */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1424 - AIF2 EQ Band 4 PG */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1425 - AIF2 EQ Band 5 A */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1426 - AIF2 EQ Band 5 B */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R1427 - AIF2 EQ Band 5 PG */
+ { 0x0000, 0x0000, 0x0000 }, /* R1428 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1429 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1430 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1431 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1432 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1433 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1434 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1435 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1436 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1437 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1438 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1439 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1440 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1441 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1442 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1443 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1444 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1445 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1446 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1447 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1448 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1449 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1450 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1451 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1452 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1453 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1454 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1455 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1456 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1457 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1458 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1459 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1460 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1461 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1462 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1463 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1464 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1465 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1466 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1467 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1468 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1469 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1470 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1471 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1472 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1473 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1474 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1475 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1476 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1477 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1478 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1479 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1480 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1481 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1482 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1483 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1484 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1485 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1486 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1487 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1488 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1489 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1490 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1491 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1492 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1493 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1494 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1495 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1496 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1497 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1498 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1499 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1500 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1501 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1502 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1503 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1504 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1505 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1506 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1507 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1508 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1509 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1510 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1511 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1512 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1513 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1514 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1515 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1516 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1517 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1518 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1519 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1520 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1521 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1522 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1523 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1524 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1525 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1526 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1527 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1528 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1529 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1530 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1531 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1532 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1533 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1534 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1535 */
+ { 0x01EF, 0x01EF, 0x0000 }, /* R1536 - DAC1 Mixer Volumes */
+ { 0x0037, 0x0037, 0x0000 }, /* R1537 - DAC1 Left Mixer Routing */
+ { 0x0037, 0x0037, 0x0000 }, /* R1538 - DAC1 Right Mixer Routing */
+ { 0x01EF, 0x01EF, 0x0000 }, /* R1539 - DAC2 Mixer Volumes */
+ { 0x0037, 0x0037, 0x0000 }, /* R1540 - DAC2 Left Mixer Routing */
+ { 0x0037, 0x0037, 0x0000 }, /* R1541 - DAC2 Right Mixer Routing */
+ { 0x0003, 0x0003, 0x0000 }, /* R1542 - AIF1 ADC1 Left Mixer Routing */
+ { 0x0003, 0x0003, 0x0000 }, /* R1543 - AIF1 ADC1 Right Mixer Routing */
+ { 0x0003, 0x0003, 0x0000 }, /* R1544 - AIF1 ADC2 Left Mixer Routing */
+ { 0x0003, 0x0003, 0x0000 }, /* R1545 - AIF1 ADC2 Right mixer Routing */
+ { 0x0000, 0x0000, 0x0000 }, /* R1546 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1547 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1548 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1549 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1550 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1551 */
+ { 0x02FF, 0x03FF, 0x0000 }, /* R1552 - DAC1 Left Volume */
+ { 0x02FF, 0x03FF, 0x0000 }, /* R1553 - DAC1 Right Volume */
+ { 0x02FF, 0x03FF, 0x0000 }, /* R1554 - DAC2 Left Volume */
+ { 0x02FF, 0x03FF, 0x0000 }, /* R1555 - DAC2 Right Volume */
+ { 0x0003, 0x0003, 0x0000 }, /* R1556 - DAC Softmute */
+ { 0x0000, 0x0000, 0x0000 }, /* R1557 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1558 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1559 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1560 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1561 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1562 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1563 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1564 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1565 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1566 */
+ { 0x0000, 0x0000, 0x0000 }, /* R1567 */
+ { 0x0003, 0x0003, 0x0000 }, /* R1568 - Oversampling */
+ { 0x03C3, 0x03C3, 0x0000 }, /* R1569 - Sidetone */
+};
+
+static int wm8994_readable(unsigned int reg)
+{
+ if (reg >= ARRAY_SIZE(access_masks))
+ return 0;
+ return access_masks[reg].readable != 0;
+}
+
+static int wm8994_volatile(unsigned int reg)
+{
+ if (reg >= WM8994_REG_CACHE_SIZE)
+ return 1;
+
+ switch (reg) {
+ case WM8994_SOFTWARE_RESET:
+ case WM8994_CHIP_REVISION:
+ case WM8994_DC_SERVO_1:
+ case WM8994_DC_SERVO_READBACK:
+ case WM8994_RATE_STATUS:
+ case WM8994_LDO_1:
+ case WM8994_LDO_2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int wm8994_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ struct wm8994_priv *wm8994 = codec->private_data;
+
+ BUG_ON(reg > WM8994_MAX_REGISTER);
+
+ if (!wm8994_volatile(reg))
+ wm8994->reg_cache[reg] = value;
+
+ return wm8994_reg_write(codec->control_data, reg, value);
+}
+
+static unsigned int wm8994_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ BUG_ON(reg > WM8994_MAX_REGISTER);
+
+ if (wm8994_volatile(reg))
+ return wm8994_reg_read(codec->control_data, reg);
+ else
+ return reg_cache[reg];
+}
+
+static int configure_aif_clock(struct snd_soc_codec *codec, int aif)
+{
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int rate;
+ int reg1 = 0;
+ int offset;
+
+ if (aif)
+ offset = 4;
+ else
+ offset = 0;
+
+ switch (wm8994->sysclk[aif]) {
+ case WM8994_SYSCLK_MCLK1:
+ rate = wm8994->mclk[0];
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ reg1 |= 0x8;
+ rate = wm8994->mclk[1];
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ reg1 |= 0x10;
+ rate = wm8994->fll[0].out;
+ break;
+
+ case WM8994_SYSCLK_FLL2:
+ reg1 |= 0x18;
+ rate = wm8994->fll[1].out;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (rate >= 13500000) {
+ rate /= 2;
+ reg1 |= WM8994_AIF1CLK_DIV;
+
+ dev_dbg(codec->dev, "Dividing AIF%d clock to %dHz\n",
+ aif + 1, rate);
+ }
+ wm8994->aifclk[aif] = rate;
+
+ snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1 + offset,
+ WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
+ reg1);
+
+ return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int old, new;
+
+ /* Bring up the AIF clocks first */
+ configure_aif_clock(codec, 0);
+ configure_aif_clock(codec, 1);
+
+ /* Then switch CLK_SYS over to the higher of them; a change
+ * can only happen as a result of a clocking change which can
+ * only be made outside of DAPM so we can safely redo the
+ * clocking.
+ */
+
+ /* If they're equal it doesn't matter which is used */
+ if (wm8994->aifclk[0] == wm8994->aifclk[1])
+ return 0;
+
+ if (wm8994->aifclk[0] < wm8994->aifclk[1])
+ new = WM8994_SYSCLK_SRC;
+ else
+ new = 0;
+
+ old = snd_soc_read(codec, WM8994_CLOCKING_1) & WM8994_SYSCLK_SRC;
+
+ /* If there's no change then we're done. */
+ if (old == new)
+ return 0;
+
+ snd_soc_update_bits(codec, WM8994_CLOCKING_1, WM8994_SYSCLK_SRC, new);
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static int check_clk_sys(struct snd_soc_dapm_widget *source,
+ struct snd_soc_dapm_widget *sink)
+{
+ int reg = snd_soc_read(source->codec, WM8994_CLOCKING_1);
+ const char *clk;
+
+ /* Check what we're currently using for CLK_SYS */
+ if (reg & WM8994_SYSCLK_SRC)
+ clk = "AIF2CLK";
+ else
+ clk = "AIF1CLK";
+
+ return strcmp(source->name, clk) == 0;
+}
+
+static const char *sidetone_hpf_text[] = {
+ "2.7kHz", "1.35kHz", "675Hz", "370Hz", "180Hz", "90Hz", "45Hz"
+};
+
+static const struct soc_enum sidetone_hpf =
+ SOC_ENUM_SINGLE(WM8994_SIDETONE, 7, 7, sidetone_hpf_text);
+
+static const DECLARE_TLV_DB_SCALE(aif_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(st_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(wm8994_3d_tlv, -1600, 183, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+#define WM8994_DRC_SWITCH(xname, reg, shift) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
+ .put = wm8994_put_drc_sw, \
+ .private_value = SOC_SINGLE_VALUE(reg, shift, 1, 0) }
+
+static int wm8994_put_drc_sw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int mask, ret;
+
+ /* Can't enable both ADC and DAC paths simultaneously */
+ if (mc->shift == WM8994_AIF1DAC1_DRC_ENA_SHIFT)
+ mask = WM8994_AIF1ADC1L_DRC_ENA_MASK |
+ WM8994_AIF1ADC1R_DRC_ENA_MASK;
+ else
+ mask = WM8994_AIF1DAC1_DRC_ENA_MASK;
+
+ ret = snd_soc_read(codec, mc->reg);
+ if (ret < 0)
+ return ret;
+ if (ret & mask)
+ return -EINVAL;
+
+ return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
+
+
+static void wm8994_set_drc(struct snd_soc_codec *codec, int drc)
+{
+ struct wm8994_priv *wm8994 = codec->private_data;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ int base = wm8994_drc_base[drc];
+ int cfg = wm8994->drc_cfg[drc];
+ int save, i;
+
+ /* Save any enables; the configuration should clear them. */
+ save = snd_soc_read(codec, base);
+ save &= WM8994_AIF1DAC1_DRC_ENA | WM8994_AIF1ADC1L_DRC_ENA |
+ WM8994_AIF1ADC1R_DRC_ENA;
+
+ for (i = 0; i < WM8994_DRC_REGS; i++)
+ snd_soc_update_bits(codec, base + i, 0xffff,
+ pdata->drc_cfgs[cfg].regs[i]);
+
+ snd_soc_update_bits(codec, base, WM8994_AIF1DAC1_DRC_ENA |
+ WM8994_AIF1ADC1L_DRC_ENA |
+ WM8994_AIF1ADC1R_DRC_ENA, save);
+}
+
+/* Icky as hell but saves code duplication */
+static int wm8994_get_drc(const char *name)
+{
+ if (strcmp(name, "AIF1DRC1 Mode") == 0)
+ return 0;
+ if (strcmp(name, "AIF1DRC2 Mode") == 0)
+ return 1;
+ if (strcmp(name, "AIF2DRC Mode") == 0)
+ return 2;
+ return -EINVAL;
+}
+
+static int wm8994_put_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8994_priv *wm8994 = codec->private_data;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ int drc = wm8994_get_drc(kcontrol->id.name);
+ int value = ucontrol->value.integer.value[0];
+
+ if (drc < 0)
+ return drc;
+
+ if (value >= pdata->num_drc_cfgs)
+ return -EINVAL;
+
+ wm8994->drc_cfg[drc] = value;
+
+ wm8994_set_drc(codec, drc);
+
+ return 0;
+}
+
+static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int drc = wm8994_get_drc(kcontrol->id.name);
+
+ ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc];
+
+ return 0;
+}
+
+static void wm8994_set_retune_mobile(struct snd_soc_codec *codec, int block)
+{
+ struct wm8994_priv *wm8994 = codec->private_data;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ int base = wm8994_retune_mobile_base[block];
+ int iface, best, best_val, save, i, cfg;
+
+ if (!pdata || !wm8994->num_retune_mobile_texts)
+ return;
+
+ switch (block) {
+ case 0:
+ case 1:
+ iface = 0;
+ break;
+ case 2:
+ iface = 1;
+ break;
+ default:
+ return;
+ }
+
+ /* Find the version of the currently selected configuration
+ * with the nearest sample rate. */
+ cfg = wm8994->retune_mobile_cfg[block];
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8994->retune_mobile_texts[cfg]) == 0 &&
+ abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8994->dac_rates[iface]) < best_val) {
+ best = i;
+ best_val = abs(pdata->retune_mobile_cfgs[i].rate
+ - wm8994->dac_rates[iface]);
+ }
+ }
+
+ dev_dbg(codec->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n",
+ block,
+ pdata->retune_mobile_cfgs[best].name,
+ pdata->retune_mobile_cfgs[best].rate,
+ wm8994->dac_rates[iface]);
+
+ /* The EQ will be disabled while reconfiguring it, remember the
+ * current configuration.
+ */
+ save = snd_soc_read(codec, base);
+ save &= WM8994_AIF1DAC1_EQ_ENA;
+
+ for (i = 0; i < WM8994_EQ_REGS; i++)
+ snd_soc_update_bits(codec, base + i, 0xffff,
+ pdata->retune_mobile_cfgs[best].regs[i]);
+
+ snd_soc_update_bits(codec, base, WM8994_AIF1DAC1_EQ_ENA, save);
+}
+
+/* Icky as hell but saves code duplication */
+static int wm8994_get_retune_mobile_block(const char *name)
+{
+ if (strcmp(name, "AIF1.1 EQ Mode") == 0)
+ return 0;
+ if (strcmp(name, "AIF1.2 EQ Mode") == 0)
+ return 1;
+ if (strcmp(name, "AIF2 EQ Mode") == 0)
+ return 2;
+ return -EINVAL;
+}
+
+static int wm8994_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8994_priv *wm8994 = codec->private_data;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ int block = wm8994_get_retune_mobile_block(kcontrol->id.name);
+ int value = ucontrol->value.integer.value[0];
+
+ if (block < 0)
+ return block;
+
+ if (value >= pdata->num_retune_mobile_cfgs)
+ return -EINVAL;
+
+ wm8994->retune_mobile_cfg[block] = value;
+
+ wm8994_set_retune_mobile(codec, block);
+
+ return 0;
+}
+
+static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int block = wm8994_get_retune_mobile_block(kcontrol->id.name);
+
+ ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block];
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new wm8994_snd_controls[] = {
+SOC_DOUBLE_R_TLV("AIF1ADC1 Volume", WM8994_AIF1_ADC1_LEFT_VOLUME,
+ WM8994_AIF1_ADC1_RIGHT_VOLUME,
+ 1, 119, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
+ WM8994_AIF1_ADC2_RIGHT_VOLUME,
+ 1, 119, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF2ADC Volume", WM8994_AIF2_ADC_LEFT_VOLUME,
+ WM8994_AIF2_ADC_RIGHT_VOLUME,
+ 1, 119, 0, digital_tlv),
+
+SOC_DOUBLE_R_TLV("AIF1DAC1 Volume", WM8994_AIF1_DAC1_LEFT_VOLUME,
+ WM8994_AIF1_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
+ WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF2DAC Volume", WM8994_AIF2_DAC_LEFT_VOLUME,
+ WM8994_AIF2_DAC_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+
+SOC_SINGLE_TLV("AIF1 Boost Volume", WM8994_AIF1_CONTROL_2, 10, 3, 0, aif_tlv),
+SOC_SINGLE_TLV("AIF2 Boost Volume", WM8994_AIF2_CONTROL_2, 10, 3, 0, aif_tlv),
+
+SOC_SINGLE("AIF1DAC1 EQ Switch", WM8994_AIF1_DAC1_EQ_GAINS_1, 0, 1, 0),
+SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
+SOC_SINGLE("AIF2 EQ Switch", WM8994_AIF2_EQ_GAINS_1, 0, 1, 0),
+
+WM8994_DRC_SWITCH("AIF1DAC1 DRC Switch", WM8994_AIF1_DRC1_1, 2),
+WM8994_DRC_SWITCH("AIF1ADC1L DRC Switch", WM8994_AIF1_DRC1_1, 1),
+WM8994_DRC_SWITCH("AIF1ADC1R DRC Switch", WM8994_AIF1_DRC1_1, 0),
+
+WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
+WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
+WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
+
+WM8994_DRC_SWITCH("AIF2DAC DRC Switch", WM8994_AIF2_DRC_1, 2),
+WM8994_DRC_SWITCH("AIF2ADCL DRC Switch", WM8994_AIF2_DRC_1, 1),
+WM8994_DRC_SWITCH("AIF2ADCR DRC Switch", WM8994_AIF2_DRC_1, 0),
+
+SOC_SINGLE_TLV("DAC1 Right Sidetone Volume", WM8994_DAC1_MIXER_VOLUMES,
+ 5, 12, 0, st_tlv),
+SOC_SINGLE_TLV("DAC1 Left Sidetone Volume", WM8994_DAC1_MIXER_VOLUMES,
+ 0, 12, 0, st_tlv),
+SOC_SINGLE_TLV("DAC2 Right Sidetone Volume", WM8994_DAC2_MIXER_VOLUMES,
+ 5, 12, 0, st_tlv),
+SOC_SINGLE_TLV("DAC2 Left Sidetone Volume", WM8994_DAC2_MIXER_VOLUMES,
+ 0, 12, 0, st_tlv),
+SOC_ENUM("Sidetone HPF Mux", sidetone_hpf),
+SOC_SINGLE("Sidetone HPF Switch", WM8994_SIDETONE, 6, 1, 0),
+
+SOC_DOUBLE_R_TLV("DAC1 Volume", WM8994_DAC1_LEFT_VOLUME,
+ WM8994_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+SOC_DOUBLE_R("DAC1 Switch", WM8994_DAC1_LEFT_VOLUME,
+ WM8994_DAC1_RIGHT_VOLUME, 9, 1, 1),
+
+SOC_DOUBLE_R_TLV("DAC2 Volume", WM8994_DAC2_LEFT_VOLUME,
+ WM8994_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+SOC_DOUBLE_R("DAC2 Switch", WM8994_DAC2_LEFT_VOLUME,
+ WM8994_DAC2_RIGHT_VOLUME, 9, 1, 1),
+
+SOC_SINGLE_TLV("SPKL DAC2 Volume", WM8994_SPKMIXL_ATTENUATION,
+ 6, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKL DAC1 Volume", WM8994_SPKMIXL_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR DAC2 Volume", WM8994_SPKMIXR_ATTENUATION,
+ 6, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKR DAC1 Volume", WM8994_SPKMIXR_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("AIF1DAC1 3D Stereo Volume", WM8994_AIF1_DAC1_FILTERS_2,
+ 10, 15, 0, wm8994_3d_tlv),
+SOC_SINGLE("AIF1DAC1 3D Stereo Switch", WM8994_AIF1_DAC2_FILTERS_2,
+ 8, 1, 0),
+SOC_SINGLE_TLV("AIF1DAC2 3D Stereo Volume", WM8994_AIF1_DAC2_FILTERS_2,
+ 10, 15, 0, wm8994_3d_tlv),
+SOC_SINGLE("AIF1DAC2 3D Stereo Switch", WM8994_AIF1_DAC2_FILTERS_2,
+ 8, 1, 0),
+SOC_SINGLE_TLV("AIF2DAC 3D Stereo Volume", WM8994_AIF1_DAC1_FILTERS_2,
+ 10, 15, 0, wm8994_3d_tlv),
+SOC_SINGLE("AIF2DAC 3D Stereo Switch", WM8994_AIF1_DAC2_FILTERS_2,
+ 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8994_eq_controls[] = {
+SOC_SINGLE_TLV("AIF1DAC1 EQ1 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC1 EQ2 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 6, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC1 EQ3 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 1, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC1 EQ4 Volume", WM8994_AIF1_DAC1_EQ_GAINS_2, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC1 EQ5 Volume", WM8994_AIF1_DAC1_EQ_GAINS_2, 6, 31, 0,
+ eq_tlv),
+
+SOC_SINGLE_TLV("AIF1DAC2 EQ1 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC2 EQ2 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 6, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC2 EQ3 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 1, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC2 EQ4 Volume", WM8994_AIF1_DAC2_EQ_GAINS_2, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF1DAC2 EQ5 Volume", WM8994_AIF1_DAC2_EQ_GAINS_2, 6, 31, 0,
+ eq_tlv),
+
+SOC_SINGLE_TLV("AIF2 EQ1 Volume", WM8994_AIF2_EQ_GAINS_1, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF2 EQ2 Volume", WM8994_AIF2_EQ_GAINS_1, 6, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF2 EQ3 Volume", WM8994_AIF2_EQ_GAINS_1, 1, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF2 EQ4 Volume", WM8994_AIF2_EQ_GAINS_2, 11, 31, 0,
+ eq_tlv),
+SOC_SINGLE_TLV("AIF2 EQ5 Volume", WM8994_AIF2_EQ_GAINS_2, 6, 31, 0,
+ eq_tlv),
+};
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ return configure_clock(codec);
+
+ case SND_SOC_DAPM_POST_PMD:
+ configure_clock(codec);
+ break;
+ }
+
+ return 0;
+}
+
+static void wm8994_update_class_w(struct snd_soc_codec *codec)
+{
+ int enable = 1;
+ int source = 0; /* GCC flow analysis can't track enable */
+ int reg, reg_r;
+
+ /* Only support direct DAC->headphone paths */
+ reg = snd_soc_read(codec, WM8994_OUTPUT_MIXER_1);
+ if (!(reg & WM8994_DAC1L_TO_HPOUT1L)) {
+ dev_dbg(codec->dev, "HPL connected to output mixer\n");
+ enable = 0;
+ }
+
+ reg = snd_soc_read(codec, WM8994_OUTPUT_MIXER_2);
+ if (!(reg & WM8994_DAC1R_TO_HPOUT1R)) {
+ dev_dbg(codec->dev, "HPR connected to output mixer\n");
+ enable = 0;
+ }
+
+ /* We also need the same setting for L/R and only one path */
+ reg = snd_soc_read(codec, WM8994_DAC1_LEFT_MIXER_ROUTING);
+ switch (reg) {
+ case WM8994_AIF2DACL_TO_DAC1L:
+ dev_dbg(codec->dev, "Class W source AIF2DAC\n");
+ source = 2 << WM8994_CP_DYN_SRC_SEL_SHIFT;
+ break;
+ case WM8994_AIF1DAC2L_TO_DAC1L:
+ dev_dbg(codec->dev, "Class W source AIF1DAC2\n");
+ source = 1 << WM8994_CP_DYN_SRC_SEL_SHIFT;
+ break;
+ case WM8994_AIF1DAC1L_TO_DAC1L:
+ dev_dbg(codec->dev, "Class W source AIF1DAC1\n");
+ source = 0 << WM8994_CP_DYN_SRC_SEL_SHIFT;
+ break;
+ default:
+ dev_dbg(codec->dev, "DAC mixer setting: %x\n", reg);
+ enable = 0;
+ break;
+ }
+
+ reg_r = snd_soc_read(codec, WM8994_DAC1_RIGHT_MIXER_ROUTING);
+ if (reg_r != reg) {
+ dev_dbg(codec->dev, "Left and right DAC mixers different\n");
+ enable = 0;
+ }
+
+ if (enable) {
+ dev_dbg(codec->dev, "Class W enabled\n");
+ snd_soc_update_bits(codec, WM8994_CLASS_W_1,
+ WM8994_CP_DYN_PWR |
+ WM8994_CP_DYN_SRC_SEL_MASK,
+ source | WM8994_CP_DYN_PWR);
+
+ } else {
+ dev_dbg(codec->dev, "Class W disabled\n");
+ snd_soc_update_bits(codec, WM8994_CLASS_W_1,
+ WM8994_CP_DYN_PWR, 0);
+ }
+}
+
+static const char *hp_mux_text[] = {
+ "Mixer",
+ "DAC",
+};
+
+#define WM8994_HP_ENUM(xname, xenum) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_enum_double, \
+ .get = snd_soc_dapm_get_enum_double, \
+ .put = wm8994_put_hp_enum, \
+ .private_value = (unsigned long)&xenum }
+
+static int wm8994_put_hp_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *w = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = w->codec;
+ int ret;
+
+ ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ wm8994_update_class_w(codec);
+
+ return ret;
+}
+
+static const struct soc_enum hpl_enum =
+ SOC_ENUM_SINGLE(WM8994_OUTPUT_MIXER_1, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ WM8994_HP_ENUM("Left Headphone Mux", hpl_enum);
+
+static const struct soc_enum hpr_enum =
+ SOC_ENUM_SINGLE(WM8994_OUTPUT_MIXER_2, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ WM8994_HP_ENUM("Right Headphone Mux", hpr_enum);
+
+static const char *adc_mux_text[] = {
+ "ADC",
+ "DMIC",
+};
+
+static const struct soc_enum adc_enum =
+ SOC_ENUM_SINGLE(0, 0, 2, adc_mux_text);
+
+static const struct snd_kcontrol_new adcl_mux =
+ SOC_DAPM_ENUM_VIRT("ADCL Mux", adc_enum);
+
+static const struct snd_kcontrol_new adcr_mux =
+ SOC_DAPM_ENUM_VIRT("ADCR Mux", adc_enum);
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DAC2 Switch", WM8994_SPEAKER_MIXER, 9, 1, 0),
+SOC_DAPM_SINGLE("Input Switch", WM8994_SPEAKER_MIXER, 7, 1, 0),
+SOC_DAPM_SINGLE("IN1LP Switch", WM8994_SPEAKER_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8994_SPEAKER_MIXER, 3, 1, 0),
+SOC_DAPM_SINGLE("DAC1 Switch", WM8994_SPEAKER_MIXER, 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DAC2 Switch", WM8994_SPEAKER_MIXER, 8, 1, 0),
+SOC_DAPM_SINGLE("Input Switch", WM8994_SPEAKER_MIXER, 6, 1, 0),
+SOC_DAPM_SINGLE("IN1RP Switch", WM8994_SPEAKER_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8994_SPEAKER_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC1 Switch", WM8994_SPEAKER_MIXER, 0, 1, 0),
+};
+
+/* Debugging; dump chip status after DAPM transitions */
+static int post_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ dev_dbg(codec->dev, "SRC status: %x\n",
+ snd_soc_read(codec,
+ WM8994_RATE_STATUS));
+ return 0;
+}
+
+static const struct snd_kcontrol_new aif1adc1l_mix[] = {
+SOC_DAPM_SINGLE("ADC/DMIC Switch", WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING,
+ 1, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new aif1adc1r_mix[] = {
+SOC_DAPM_SINGLE("ADC/DMIC Switch", WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING,
+ 1, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new aif2dac2l_mix[] = {
+SOC_DAPM_SINGLE("Right Sidetone Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
+ 5, 1, 0),
+SOC_DAPM_SINGLE("Left Sidetone Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
+ 4, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
+ 2, 1, 0),
+SOC_DAPM_SINGLE("AIF1.2 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
+ 1, 1, 0),
+SOC_DAPM_SINGLE("AIF1.1 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new aif2dac2r_mix[] = {
+SOC_DAPM_SINGLE("Right Sidetone Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
+ 5, 1, 0),
+SOC_DAPM_SINGLE("Left Sidetone Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
+ 4, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
+ 2, 1, 0),
+SOC_DAPM_SINGLE("AIF1.2 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
+ 1, 1, 0),
+SOC_DAPM_SINGLE("AIF1.1 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+#define WM8994_CLASS_W_SWITCH(xname, reg, shift, max, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_volsw, \
+ .get = snd_soc_dapm_get_volsw, .put = wm8994_put_class_w, \
+ .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
+
+static int wm8994_put_class_w(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *w = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = w->codec;
+ int ret;
+
+ ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
+
+ wm8994_update_class_w(codec);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new dac1l_mix[] = {
+WM8994_CLASS_W_SWITCH("Right Sidetone Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
+ 5, 1, 0),
+WM8994_CLASS_W_SWITCH("Left Sidetone Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
+ 4, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF2 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
+ 2, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF1.2 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
+ 1, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF1.1 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new dac1r_mix[] = {
+WM8994_CLASS_W_SWITCH("Right Sidetone Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ 5, 1, 0),
+WM8994_CLASS_W_SWITCH("Left Sidetone Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ 4, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF2 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ 2, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF1.2 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ 1, 1, 0),
+WM8994_CLASS_W_SWITCH("AIF1.1 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ 0, 1, 0),
+};
+
+static const char *sidetone_text[] = {
+ "ADC/DMIC1", "DMIC2",
+};
+
+static const struct soc_enum sidetone1_enum =
+ SOC_ENUM_SINGLE(WM8994_SIDETONE, 0, 2, sidetone_text);
+
+static const struct snd_kcontrol_new sidetone1_mux =
+ SOC_DAPM_ENUM("Left Sidetone Mux", sidetone1_enum);
+
+static const struct soc_enum sidetone2_enum =
+ SOC_ENUM_SINGLE(WM8994_SIDETONE, 1, 2, sidetone_text);
+
+static const struct snd_kcontrol_new sidetone2_mux =
+ SOC_DAPM_ENUM("Right Sidetone Mux", sidetone2_enum);
+
+static const char *aif1dac_text[] = {
+ "AIF1DACDAT", "AIF3DACDAT",
+};
+
+static const struct soc_enum aif1dac_enum =
+ SOC_ENUM_SINGLE(WM8994_POWER_MANAGEMENT_6, 0, 2, aif1dac_text);
+
+static const struct snd_kcontrol_new aif1dac_mux =
+ SOC_DAPM_ENUM("AIF1DAC Mux", aif1dac_enum);
+
+static const char *aif2dac_text[] = {
+ "AIF2DACDAT", "AIF3DACDAT",
+};
+
+static const struct soc_enum aif2dac_enum =
+ SOC_ENUM_SINGLE(WM8994_POWER_MANAGEMENT_6, 1, 2, aif2dac_text);
+
+static const struct snd_kcontrol_new aif2dac_mux =
+ SOC_DAPM_ENUM("AIF2DAC Mux", aif2dac_enum);
+
+static const char *aif2adc_text[] = {
+ "AIF2ADCDAT", "AIF3DACDAT",
+};
+
+static const struct soc_enum aif2adc_enum =
+ SOC_ENUM_SINGLE(WM8994_POWER_MANAGEMENT_6, 2, 2, aif2adc_text);
+
+static const struct snd_kcontrol_new aif2adc_mux =
+ SOC_DAPM_ENUM("AIF2ADC Mux", aif2adc_enum);
+
+static const char *aif3adc_text[] = {
+ "AIF1ADCDAT", "AIF2ADCDAT", "AIF2DACDAT",
+};
+
+static const struct soc_enum aif3adc_enum =
+ SOC_ENUM_SINGLE(WM8994_POWER_MANAGEMENT_6, 3, 3, aif3adc_text);
+
+static const struct snd_kcontrol_new aif3adc_mux =
+ SOC_DAPM_ENUM("AIF3ADC Mux", aif3adc_enum);
+
+static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("DMIC1DAT"),
+SND_SOC_DAPM_INPUT("DMIC2DAT"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_SUPPLY("DSP1CLK", WM8994_CLOCKING_1, 3, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0),
+
+SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", "AIF1 Capture",
+ 0, WM8994_POWER_MANAGEMENT_4, 9, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", "AIF1 Capture",
+ 0, WM8994_POWER_MANAGEMENT_4, 8, 0),
+SND_SOC_DAPM_AIF_IN("AIF1DAC1L", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 9, 0),
+SND_SOC_DAPM_AIF_IN("AIF1DAC1R", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 8, 0),
+
+SND_SOC_DAPM_AIF_OUT("AIF1ADC2L", "AIF1 Capture",
+ 0, WM8994_POWER_MANAGEMENT_4, 11, 0),
+SND_SOC_DAPM_AIF_OUT("AIF1ADC2R", "AIF1 Capture",
+ 0, WM8994_POWER_MANAGEMENT_4, 10, 0),
+SND_SOC_DAPM_AIF_IN("AIF1DAC2L", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 11, 0),
+SND_SOC_DAPM_AIF_IN("AIF1DAC2R", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 10, 0),
+
+SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0,
+ aif1adc1l_mix, ARRAY_SIZE(aif1adc1l_mix)),
+SND_SOC_DAPM_MIXER("AIF1ADC1R Mixer", SND_SOC_NOPM, 0, 0,
+ aif1adc1r_mix, ARRAY_SIZE(aif1adc1r_mix)),
+
+SND_SOC_DAPM_MIXER("AIF2DAC2L Mixer", SND_SOC_NOPM, 0, 0,
+ aif2dac2l_mix, ARRAY_SIZE(aif2dac2l_mix)),
+SND_SOC_DAPM_MIXER("AIF2DAC2R Mixer", SND_SOC_NOPM, 0, 0,
+ aif2dac2r_mix, ARRAY_SIZE(aif2dac2r_mix)),
+
+SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &sidetone1_mux),
+SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &sidetone2_mux),
+
+SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0,
+ dac1l_mix, ARRAY_SIZE(dac1l_mix)),
+SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0,
+ dac1r_mix, ARRAY_SIZE(dac1r_mix)),
+
+SND_SOC_DAPM_AIF_OUT("AIF2ADCL", NULL, 0,
+ WM8994_POWER_MANAGEMENT_4, 13, 0),
+SND_SOC_DAPM_AIF_OUT("AIF2ADCR", NULL, 0,
+ WM8994_POWER_MANAGEMENT_4, 12, 0),
+SND_SOC_DAPM_AIF_IN("AIF2DACL", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 13, 0),
+SND_SOC_DAPM_AIF_IN("AIF2DACR", NULL, 0,
+ WM8994_POWER_MANAGEMENT_5, 12, 0),
+
+SND_SOC_DAPM_AIF_IN("AIF1DACDAT", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIF2DACDAT", "AIF2 Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIF2ADCDAT", "AIF2 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("AIF1DAC Mux", SND_SOC_NOPM, 0, 0, &aif1dac_mux),
+SND_SOC_DAPM_MUX("AIF2DAC Mux", SND_SOC_NOPM, 0, 0, &aif2dac_mux),
+SND_SOC_DAPM_MUX("AIF2ADC Mux", SND_SOC_NOPM, 0, 0, &aif2adc_mux),
+SND_SOC_DAPM_MUX("AIF3ADC Mux", SND_SOC_NOPM, 0, 0, &aif3adc_mux),
+
+SND_SOC_DAPM_AIF_IN("AIF3DACDAT", "AIF3 Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIF3ADCDAT", "AIF3 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8994_CLOCKING_1, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8994_POWER_MANAGEMENT_4, 5, 0),
+SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8994_POWER_MANAGEMENT_4, 4, 0),
+SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8994_POWER_MANAGEMENT_4, 3, 0),
+SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8994_POWER_MANAGEMENT_4, 2, 0),
+
+/* Power is done with the muxes since the ADC power also controls the
+ * downsampling chain, the chip will automatically manage the analogue
+ * specific portions.
+ */
+SND_SOC_DAPM_ADC("ADCL", NULL, SND_SOC_NOPM, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
+SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
+
+SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
+SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
+SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+
+SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
+ left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("SPKR", WM8994_POWER_MANAGEMENT_3, 9, 0,
+ right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+SND_SOC_DAPM_POST("Debug log", post_ev),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ { "CLK_SYS", NULL, "AIF1CLK", check_clk_sys },
+ { "CLK_SYS", NULL, "AIF2CLK", check_clk_sys },
+
+ { "DSP1CLK", NULL, "CLK_SYS" },
+ { "DSP2CLK", NULL, "CLK_SYS" },
+ { "DSPINTCLK", NULL, "CLK_SYS" },
+
+ { "AIF1ADC1L", NULL, "AIF1CLK" },
+ { "AIF1ADC1L", NULL, "DSP1CLK" },
+ { "AIF1ADC1R", NULL, "AIF1CLK" },
+ { "AIF1ADC1R", NULL, "DSP1CLK" },
+ { "AIF1ADC1R", NULL, "DSPINTCLK" },
+
+ { "AIF1DAC1L", NULL, "AIF1CLK" },
+ { "AIF1DAC1L", NULL, "DSP1CLK" },
+ { "AIF1DAC1R", NULL, "AIF1CLK" },
+ { "AIF1DAC1R", NULL, "DSP1CLK" },
+ { "AIF1DAC1R", NULL, "DSPINTCLK" },
+
+ { "AIF1ADC2L", NULL, "AIF1CLK" },
+ { "AIF1ADC2L", NULL, "DSP1CLK" },
+ { "AIF1ADC2R", NULL, "AIF1CLK" },
+ { "AIF1ADC2R", NULL, "DSP1CLK" },
+ { "AIF1ADC2R", NULL, "DSPINTCLK" },
+
+ { "AIF1DAC2L", NULL, "AIF1CLK" },
+ { "AIF1DAC2L", NULL, "DSP1CLK" },
+ { "AIF1DAC2R", NULL, "AIF1CLK" },
+ { "AIF1DAC2R", NULL, "DSP1CLK" },
+ { "AIF1DAC2R", NULL, "DSPINTCLK" },
+
+ { "AIF2ADCL", NULL, "AIF2CLK" },
+ { "AIF2ADCL", NULL, "DSP2CLK" },
+ { "AIF2ADCR", NULL, "AIF2CLK" },
+ { "AIF2ADCR", NULL, "DSP2CLK" },
+ { "AIF2ADCR", NULL, "DSPINTCLK" },
+
+ { "AIF2DACL", NULL, "AIF2CLK" },
+ { "AIF2DACL", NULL, "DSP2CLK" },
+ { "AIF2DACR", NULL, "AIF2CLK" },
+ { "AIF2DACR", NULL, "DSP2CLK" },
+ { "AIF2DACR", NULL, "DSPINTCLK" },
+
+ { "DMIC1L", NULL, "DMIC1DAT" },
+ { "DMIC1L", NULL, "CLK_SYS" },
+ { "DMIC1R", NULL, "DMIC1DAT" },
+ { "DMIC1R", NULL, "CLK_SYS" },
+ { "DMIC2L", NULL, "DMIC2DAT" },
+ { "DMIC2L", NULL, "CLK_SYS" },
+ { "DMIC2R", NULL, "DMIC2DAT" },
+ { "DMIC2R", NULL, "CLK_SYS" },
+
+ { "ADCL", NULL, "AIF1CLK" },
+ { "ADCL", NULL, "DSP1CLK" },
+ { "ADCL", NULL, "DSPINTCLK" },
+
+ { "ADCR", NULL, "AIF1CLK" },
+ { "ADCR", NULL, "DSP1CLK" },
+ { "ADCR", NULL, "DSPINTCLK" },
+
+ { "ADCL Mux", "ADC", "ADCL" },
+ { "ADCL Mux", "DMIC", "DMIC1L" },
+ { "ADCR Mux", "ADC", "ADCR" },
+ { "ADCR Mux", "DMIC", "DMIC1R" },
+
+ { "DAC1L", NULL, "AIF1CLK" },
+ { "DAC1L", NULL, "DSP1CLK" },
+ { "DAC1L", NULL, "DSPINTCLK" },
+
+ { "DAC1R", NULL, "AIF1CLK" },
+ { "DAC1R", NULL, "DSP1CLK" },
+ { "DAC1R", NULL, "DSPINTCLK" },
+
+ { "DAC2L", NULL, "AIF2CLK" },
+ { "DAC2L", NULL, "DSP2CLK" },
+ { "DAC2L", NULL, "DSPINTCLK" },
+
+ { "DAC2R", NULL, "AIF2DACR" },
+ { "DAC2R", NULL, "AIF2CLK" },
+ { "DAC2R", NULL, "DSP2CLK" },
+ { "DAC2R", NULL, "DSPINTCLK" },
+
+ { "TOCLK", NULL, "CLK_SYS" },
+
+ /* AIF1 outputs */
+ { "AIF1ADC1L", NULL, "AIF1ADC1L Mixer" },
+ { "AIF1ADC1L Mixer", "ADC/DMIC Switch", "ADCL Mux" },
+ { "AIF1ADC1L Mixer", "AIF2 Switch", "AIF2DACL" },
+
+ { "AIF1ADC1R", NULL, "AIF1ADC1R Mixer" },
+ { "AIF1ADC1R Mixer", "ADC/DMIC Switch", "ADCR Mux" },
+ { "AIF1ADC1R Mixer", "AIF2 Switch", "AIF2DACR" },
+
+ /* Pin level routing for AIF3 */
+ { "AIF1DAC1L", NULL, "AIF1DAC Mux" },
+ { "AIF1DAC1R", NULL, "AIF1DAC Mux" },
+ { "AIF1DAC2L", NULL, "AIF1DAC Mux" },
+ { "AIF1DAC2R", NULL, "AIF1DAC Mux" },
+
+ { "AIF2DACL", NULL, "AIF2DAC Mux" },
+ { "AIF2DACR", NULL, "AIF2DAC Mux" },
+
+ { "AIF1DAC Mux", "AIF1DACDAT", "AIF1DACDAT" },
+ { "AIF1DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
+ { "AIF2DAC Mux", "AIF2DACDAT", "AIF2DACDAT" },
+ { "AIF2DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
+ { "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCL" },
+ { "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCR" },
+ { "AIF2ADC Mux", "AIF3DACDAT", "AIF3ADCDAT" },
+
+ /* DAC1 inputs */
+ { "DAC1L", NULL, "DAC1L Mixer" },
+ { "DAC1L Mixer", "AIF2 Switch", "AIF2DACL" },
+ { "DAC1L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
+ { "DAC1L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
+ { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" },
+ { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" },
+
+ { "DAC1R", NULL, "DAC1R Mixer" },
+ { "DAC1R Mixer", "AIF2 Switch", "AIF2DACR" },
+ { "DAC1R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
+ { "DAC1R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
+ { "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" },
+ { "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" },
+
+ /* DAC2/AIF2 outputs */
+ { "AIF2ADCL", NULL, "AIF2DAC2L Mixer" },
+ { "DAC2L", NULL, "AIF2DAC2L Mixer" },
+ { "AIF2DAC2L Mixer", "AIF2 Switch", "AIF2DACL" },
+ { "AIF2DAC2L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
+ { "AIF2DAC2L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
+ { "AIF2DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" },
+ { "AIF2DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" },
+
+ { "AIF2ADCR", NULL, "AIF2DAC2R Mixer" },
+ { "DAC2R", NULL, "AIF2DAC2R Mixer" },
+ { "AIF2DAC2R Mixer", "AIF2 Switch", "AIF2DACR" },
+ { "AIF2DAC2R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
+ { "AIF2DAC2R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
+ { "AIF2DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" },
+ { "AIF2DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" },
+
+ { "AIF2ADCDAT", NULL, "AIF2ADC Mux" },
+
+ /* AIF3 output */
+ { "AIF3ADCDAT", "AIF1ADCDAT", "AIF1ADC1L" },
+ { "AIF3ADCDAT", "AIF1ADCDAT", "AIF1ADC1R" },
+ { "AIF3ADCDAT", "AIF1ADCDAT", "AIF1ADC2L" },
+ { "AIF3ADCDAT", "AIF1ADCDAT", "AIF1ADC2R" },
+ { "AIF3ADCDAT", "AIF2ADCDAT", "AIF2ADCL" },
+ { "AIF3ADCDAT", "AIF2ADCDAT", "AIF2ADCR" },
+ { "AIF3ADCDAT", "AIF2DACDAT", "AIF2DACL" },
+ { "AIF3ADCDAT", "AIF2DACDAT", "AIF2DACR" },
+
+ /* Sidetone */
+ { "Left Sidetone", "ADC/DMIC1", "ADCL Mux" },
+ { "Left Sidetone", "DMIC2", "DMIC2L" },
+ { "Right Sidetone", "ADC/DMIC1", "ADCR Mux" },
+ { "Right Sidetone", "DMIC2", "DMIC2R" },
+
+ /* Output stages */
+ { "Left Output Mixer", "DAC Switch", "DAC1L" },
+ { "Right Output Mixer", "DAC Switch", "DAC1R" },
+
+ { "SPKL", "DAC1 Switch", "DAC1L" },
+ { "SPKL", "DAC2 Switch", "DAC2L" },
+
+ { "SPKR", "DAC1 Switch", "DAC1R" },
+ { "SPKR", "DAC2 Switch", "DAC2R" },
+
+ { "Left Headphone Mux", "DAC", "DAC1L" },
+ { "Right Headphone Mux", "DAC", "DAC1R" },
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+struct fll_div {
+ u16 outdiv;
+ u16 n;
+ u16 k;
+ u16 clk_ref_div;
+ u16 fll_fratio;
+};
+
+static int wm8994_get_fll_config(struct fll_div *fll,
+ int freq_in, int freq_out)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod;
+
+ pr_debug("FLL input=%dHz, output=%dHz\n", freq_in, freq_out);
+
+ /* Scale the input frequency down to <= 13.5MHz */
+ fll->clk_ref_div = 0;
+ while (freq_in > 13500000) {
+ fll->clk_ref_div++;
+ freq_in /= 2;
+
+ if (fll->clk_ref_div > 3)
+ return -EINVAL;
+ }
+ pr_debug("CLK_REF_DIV=%d, Fref=%dHz\n", fll->clk_ref_div, freq_in);
+
+ /* Scale the output to give 90MHz<=Fvco<=100MHz */
+ fll->outdiv = 3;
+ while (freq_out * (fll->outdiv + 1) < 90000000) {
+ fll->outdiv++;
+ if (fll->outdiv > 63)
+ return -EINVAL;
+ }
+ freq_out *= fll->outdiv + 1;
+ pr_debug("OUTDIV=%d, Fvco=%dHz\n", fll->outdiv, freq_out);
+
+ if (freq_in > 1000000) {
+ fll->fll_fratio = 0;
+ } else {
+ fll->fll_fratio = 3;
+ freq_in *= 8;
+ }
+ pr_debug("FLL_FRATIO=%d, Fref=%dHz\n", fll->fll_fratio, freq_in);
+
+ /* Now, calculate N.K */
+ Ndiv = freq_out / freq_in;
+
+ fll->n = Ndiv;
+ Nmod = freq_out % freq_in;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, freq_in);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll->k = K / 10;
+
+ pr_debug("N=%x K=%x\n", fll->n, fll->k);
+
+ return 0;
+}
+
+static int wm8994_set_fll(struct snd_soc_dai *dai, int id, int src,
+ unsigned int freq_in, unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int reg_offset, ret;
+ struct fll_div fll;
+ u16 reg, aif1, aif2;
+
+ aif1 = snd_soc_read(codec, WM8994_AIF1_CLOCKING_1)
+ & WM8994_AIF1CLK_ENA;
+
+ aif2 = snd_soc_read(codec, WM8994_AIF2_CLOCKING_1)
+ & WM8994_AIF2CLK_ENA;
+
+ switch (id) {
+ case WM8994_FLL1:
+ reg_offset = 0;
+ id = 0;
+ break;
+ case WM8994_FLL2:
+ reg_offset = 0x20;
+ id = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Are we changing anything? */
+ if (wm8994->fll[id].src == src &&
+ wm8994->fll[id].in == freq_in && wm8994->fll[id].out == freq_out)
+ return 0;
+
+ /* If we're stopping the FLL redo the old config - no
+ * registers will actually be written but we avoid GCC flow
+ * analysis bugs spewing warnings.
+ */
+ if (freq_out)
+ ret = wm8994_get_fll_config(&fll, freq_in, freq_out);
+ else
+ ret = wm8994_get_fll_config(&fll, wm8994->fll[id].in,
+ wm8994->fll[id].out);
+ if (ret < 0)
+ return ret;
+
+ /* Gate the AIF clocks while we reclock */
+ snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+ WM8994_AIF1CLK_ENA, 0);
+ snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+ WM8994_AIF2CLK_ENA, 0);
+
+ /* We always need to disable the FLL while reconfiguring */
+ snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_1 + reg_offset,
+ WM8994_FLL1_ENA, 0);
+
+ reg = (fll.outdiv << WM8994_FLL1_OUTDIV_SHIFT) |
+ (fll.fll_fratio << WM8994_FLL1_FRATIO_SHIFT);
+ snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_2 + reg_offset,
+ WM8994_FLL1_OUTDIV_MASK |
+ WM8994_FLL1_FRATIO_MASK, reg);
+
+ snd_soc_write(codec, WM8994_FLL1_CONTROL_3 + reg_offset, fll.k);
+
+ snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_4 + reg_offset,
+ WM8994_FLL1_N_MASK,
+ fll.n << WM8994_FLL1_N_SHIFT);
+
+ snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_5 + reg_offset,
+ WM8994_FLL1_REFCLK_DIV_MASK,
+ fll.clk_ref_div << WM8994_FLL1_REFCLK_DIV_SHIFT);
+
+ /* Enable (with fractional mode if required) */
+ if (freq_out) {
+ if (fll.k)
+ reg = WM8994_FLL1_ENA | WM8994_FLL1_FRAC;
+ else
+ reg = WM8994_FLL1_ENA;
+ snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_1 + reg_offset,
+ WM8994_FLL1_ENA | WM8994_FLL1_FRAC,
+ reg);
+ }
+
+ wm8994->fll[id].in = freq_in;
+ wm8994->fll[id].out = freq_out;
+
+ /* Enable any gated AIF clocks */
+ snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+ WM8994_AIF1CLK_ENA, aif1);
+ snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+ WM8994_AIF2CLK_ENA, aif2);
+
+ configure_clock(codec);
+
+ return 0;
+}
+
+static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8994_priv *wm8994 = codec->private_data;
+
+ switch (dai->id) {
+ case 1:
+ case 2:
+ break;
+
+ default:
+ /* AIF3 shares clocking with AIF1/2 */
+ return -EINVAL;
+ }
+
+ switch (clk_id) {
+ case WM8994_SYSCLK_MCLK1:
+ wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK1;
+ wm8994->mclk[0] = freq;
+ dev_dbg(dai->dev, "AIF%d using MCLK1 at %uHz\n",
+ dai->id, freq);
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ /* TODO: Set GPIO AF */
+ wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK2;
+ wm8994->mclk[1] = freq;
+ dev_dbg(dai->dev, "AIF%d using MCLK2 at %uHz\n",
+ dai->id, freq);
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_FLL1;
+ dev_dbg(dai->dev, "AIF%d using FLL1\n", dai->id);
+ break;
+
+ case WM8994_SYSCLK_FLL2:
+ wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_FLL2;
+ dev_dbg(dai->dev, "AIF%d using FLL2\n", dai->id);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ configure_clock(codec);
+
+ return 0;
+}
+
+static int wm8994_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID=2x40k */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_VMID_SEL_MASK, 0x2);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Tweak DC servo configuration for improved
+ * performance. */
+ snd_soc_write(codec, 0x102, 0x3);
+ snd_soc_write(codec, 0x56, 0x3);
+ snd_soc_write(codec, 0x102, 0);
+
+ /* Discharge LINEOUT1 & 2 */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH);
+
+ /* Startup bias, VMID ramp & buffer */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (0x11 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Main bias enable, VMID=2x40k */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA |
+ WM8994_VMID_SEL_MASK,
+ WM8994_BIAS_ENA | 0x2);
+
+ msleep(20);
+ }
+
+ /* VMID=2x500k */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_VMID_SEL_MASK, 0x4);
+
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Switch over to startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (1 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Disable main biases */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA | WM8994_VMID_SEL_MASK, 0);
+
+ /* Discharge line */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH);
+
+ msleep(5);
+
+ /* Switch off startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK, 0);
+
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+static int wm8994_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int ms_reg;
+ int aif1_reg;
+ int ms = 0;
+ int aif1 = 0;
+
+ switch (dai->id) {
+ case 1:
+ ms_reg = WM8994_AIF1_MASTER_SLAVE;
+ aif1_reg = WM8994_AIF1_CONTROL_1;
+ break;
+ case 2:
+ ms_reg = WM8994_AIF2_MASTER_SLAVE;
+ aif1_reg = WM8994_AIF2_CONTROL_1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ms = WM8994_AIF1_MSTR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= WM8994_AIF1_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8994_AIF1_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8994_AIF1_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8994_AIF1_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, aif1_reg,
+ WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV |
+ WM8994_AIF1_FMT_MASK,
+ aif1);
+ snd_soc_update_bits(codec, ms_reg, WM8994_AIF1_MSTR,
+ ms);
+
+ return 0;
+}
+
+static struct {
+ int val, rate;
+} srs[] = {
+ { 0, 8000 },
+ { 1, 11025 },
+ { 2, 12000 },
+ { 3, 16000 },
+ { 4, 22050 },
+ { 5, 24000 },
+ { 6, 32000 },
+ { 7, 44100 },
+ { 8, 48000 },
+ { 9, 88200 },
+ { 10, 96000 },
+};
+
+static int fs_ratios[] = {
+ 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
+};
+
+static int bclk_divs[] = {
+ 10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
+ 640, 880, 960, 1280, 1760, 1920
+};
+
+static int wm8994_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int aif1_reg;
+ int bclk_reg;
+ int lrclk_reg;
+ int rate_reg;
+ int aif1 = 0;
+ int bclk = 0;
+ int lrclk = 0;
+ int rate_val = 0;
+ int id = dai->id - 1;
+
+ int i, cur_val, best_val, bclk_rate, best;
+
+ switch (dai->id) {
+ case 1:
+ aif1_reg = WM8994_AIF1_CONTROL_1;
+ bclk_reg = WM8994_AIF1_BCLK;
+ rate_reg = WM8994_AIF1_RATE;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
+ wm8994->lrclk_shared[0])
+ lrclk_reg = WM8994_AIF1DAC_LRCLK;
+ else
+ lrclk_reg = WM8994_AIF1ADC_LRCLK;
+ break;
+ case 2:
+ aif1_reg = WM8994_AIF2_CONTROL_1;
+ bclk_reg = WM8994_AIF2_BCLK;
+ rate_reg = WM8994_AIF2_RATE;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
+ wm8994->lrclk_shared[1])
+ lrclk_reg = WM8994_AIF2DAC_LRCLK;
+ else
+ lrclk_reg = WM8994_AIF2ADC_LRCLK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ bclk_rate = params_rate(params) * 2;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bclk_rate *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ bclk_rate *= 20;
+ aif1 |= 0x20;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bclk_rate *= 24;
+ aif1 |= 0x40;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bclk_rate *= 32;
+ aif1 |= 0x60;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Try to find an appropriate sample rate; look for an exact match. */
+ for (i = 0; i < ARRAY_SIZE(srs); i++)
+ if (srs[i].rate == params_rate(params))
+ break;
+ if (i == ARRAY_SIZE(srs))
+ return -EINVAL;
+ rate_val |= srs[i].val << WM8994_AIF1_SR_SHIFT;
+
+ dev_dbg(dai->dev, "Sample rate is %dHz\n", srs[i].rate);
+ dev_dbg(dai->dev, "AIF%dCLK is %dHz, target BCLK %dHz\n",
+ dai->id, wm8994->aifclk[id], bclk_rate);
+
+ if (wm8994->aifclk[id] == 0) {
+ dev_err(dai->dev, "AIF%dCLK not configured\n", dai->id);
+ return -EINVAL;
+ }
+
+ /* AIFCLK/fs ratio; look for a close match in either direction */
+ best = 0;
+ best_val = abs((fs_ratios[0] * params_rate(params))
+ - wm8994->aifclk[id]);
+ for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
+ cur_val = abs((fs_ratios[i] * params_rate(params))
+ - wm8994->aifclk[id]);
+ if (cur_val >= best_val)
+ continue;
+ best = i;
+ best_val = cur_val;
+ }
+ dev_dbg(dai->dev, "Selected AIF%dCLK/fs = %d\n",
+ dai->id, fs_ratios[best]);
+ rate_val |= best;
+
+ /* We may not get quite the right frequency if using
+ * approximate clocks so look for the closest match that is
+ * higher than the target (we need to ensure that there enough
+ * BCLKs to clock out the samples).
+ */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
+ if (cur_val < 0) /* BCLK table is sorted */
+ break;
+ best = i;
+ }
+ bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
+ dev_dbg(dai->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n",
+ bclk_divs[best], bclk_rate);
+ bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
+
+ lrclk = bclk_rate / params_rate(params);
+ dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n",
+ lrclk, bclk_rate / lrclk);
+
+ snd_soc_update_bits(codec, aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+ snd_soc_update_bits(codec, bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
+ snd_soc_update_bits(codec, lrclk_reg, WM8994_AIF1DAC_RATE_MASK,
+ lrclk);
+ snd_soc_update_bits(codec, rate_reg, WM8994_AIF1_SR_MASK |
+ WM8994_AIF1CLK_RATE_MASK, rate_val);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ switch (dai->id) {
+ case 1:
+ wm8994->dac_rates[0] = params_rate(params);
+ wm8994_set_retune_mobile(codec, 0);
+ wm8994_set_retune_mobile(codec, 1);
+ break;
+ case 2:
+ wm8994->dac_rates[1] = params_rate(params);
+ wm8994_set_retune_mobile(codec, 2);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int wm8994_aif_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int mute_reg;
+ int reg;
+
+ switch (codec_dai->id) {
+ case 1:
+ mute_reg = WM8994_AIF1_DAC1_FILTERS_1;
+ break;
+ case 2:
+ mute_reg = WM8994_AIF2_DAC_FILTERS_1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mute)
+ reg = WM8994_AIF1DAC1_MUTE;
+ else
+ reg = 0;
+
+ snd_soc_update_bits(codec, mute_reg, WM8994_AIF1DAC1_MUTE, reg);
+
+ return 0;
+}
+
+#define WM8994_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8994_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8994_aif1_dai_ops = {
+ .set_sysclk = wm8994_set_dai_sysclk,
+ .set_fmt = wm8994_set_dai_fmt,
+ .hw_params = wm8994_hw_params,
+ .digital_mute = wm8994_aif_mute,
+ .set_pll = wm8994_set_fll,
+};
+
+static struct snd_soc_dai_ops wm8994_aif2_dai_ops = {
+ .set_sysclk = wm8994_set_dai_sysclk,
+ .set_fmt = wm8994_set_dai_fmt,
+ .hw_params = wm8994_hw_params,
+ .digital_mute = wm8994_aif_mute,
+ .set_pll = wm8994_set_fll,
+};
+
+struct snd_soc_dai wm8994_dai[] = {
+ {
+ .name = "WM8994 AIF1",
+ .id = 1,
+ .playback = {
+ .stream_name = "AIF1 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF1 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ .ops = &wm8994_aif1_dai_ops,
+ },
+ {
+ .name = "WM8994 AIF2",
+ .id = 2,
+ .playback = {
+ .stream_name = "AIF2 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF2 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ .ops = &wm8994_aif2_dai_ops,
+ },
+ {
+ .name = "WM8994 AIF3",
+ .playback = {
+ .stream_name = "AIF3 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ .playback = {
+ .stream_name = "AIF3 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8994_RATES,
+ .formats = WM8994_FORMATS,
+ },
+ }
+};
+EXPORT_SYMBOL_GPL(wm8994_dai);
+
+#ifdef CONFIG_PM
+static int wm8994_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8994_priv *wm8994 = codec->private_data;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
+ memcpy(&wm8994->fll_suspend[i], &wm8994->fll[i],
+ sizeof(struct fll_config));
+ ret = wm8994_set_fll(&codec->dai[0], i + 1, 0, 0, 0);
+ if (ret < 0)
+ dev_warn(codec->dev, "Failed to stop FLL%d: %d\n",
+ i + 1, ret);
+ }
+
+ wm8994_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8994_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8994_priv *wm8994 = codec->private_data;
+ u16 *reg_cache = codec->reg_cache;
+ int i, ret;
+
+ /* Restore the registers */
+ for (i = 1; i < ARRAY_SIZE(wm8994->reg_cache); i++) {
+ switch (i) {
+ case WM8994_LDO_1:
+ case WM8994_LDO_2:
+ case WM8994_SOFTWARE_RESET:
+ /* Handled by other MFD drivers */
+ continue;
+ default:
+ break;
+ }
+
+ if (!access_masks[i].writable)
+ continue;
+
+ wm8994_reg_write(codec->control_data, i, reg_cache[i]);
+ }
+
+ wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
+ ret = wm8994_set_fll(&codec->dai[0], i + 1,
+ wm8994->fll_suspend[i].src,
+ wm8994->fll_suspend[i].in,
+ wm8994->fll_suspend[i].out);
+ if (ret < 0)
+ dev_warn(codec->dev, "Failed to restore FLL%d: %d\n",
+ i + 1, ret);
+ }
+
+ return 0;
+}
+#else
+#define wm8994_suspend NULL
+#define wm8994_resume NULL
+#endif
+
+static void wm8994_handle_retune_mobile_pdata(struct wm8994_priv *wm8994)
+{
+ struct snd_soc_codec *codec = &wm8994->codec;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ struct snd_kcontrol_new controls[] = {
+ SOC_ENUM_EXT("AIF1.1 EQ Mode",
+ wm8994->retune_mobile_enum,
+ wm8994_get_retune_mobile_enum,
+ wm8994_put_retune_mobile_enum),
+ SOC_ENUM_EXT("AIF1.2 EQ Mode",
+ wm8994->retune_mobile_enum,
+ wm8994_get_retune_mobile_enum,
+ wm8994_put_retune_mobile_enum),
+ SOC_ENUM_EXT("AIF2 EQ Mode",
+ wm8994->retune_mobile_enum,
+ wm8994_get_retune_mobile_enum,
+ wm8994_put_retune_mobile_enum),
+ };
+ int ret, i, j;
+ const char **t;
+
+ /* We need an array of texts for the enum API but the number
+ * of texts is likely to be less than the number of
+ * configurations due to the sample rate dependency of the
+ * configurations. */
+ wm8994->num_retune_mobile_texts = 0;
+ wm8994->retune_mobile_texts = NULL;
+ for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
+ for (j = 0; j < wm8994->num_retune_mobile_texts; j++) {
+ if (strcmp(pdata->retune_mobile_cfgs[i].name,
+ wm8994->retune_mobile_texts[j]) == 0)
+ break;
+ }
+
+ if (j != wm8994->num_retune_mobile_texts)
+ continue;
+
+ /* Expand the array... */
+ t = krealloc(wm8994->retune_mobile_texts,
+ sizeof(char *) *
+ (wm8994->num_retune_mobile_texts + 1),
+ GFP_KERNEL);
+ if (t == NULL)
+ continue;
+
+ /* ...store the new entry... */
+ t[wm8994->num_retune_mobile_texts] =
+ pdata->retune_mobile_cfgs[i].name;
+
+ /* ...and remember the new version. */
+ wm8994->num_retune_mobile_texts++;
+ wm8994->retune_mobile_texts = t;
+ }
+
+ dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
+ wm8994->num_retune_mobile_texts);
+
+ wm8994->retune_mobile_enum.max = wm8994->num_retune_mobile_texts;
+ wm8994->retune_mobile_enum.texts = wm8994->retune_mobile_texts;
+
+ ret = snd_soc_add_controls(&wm8994->codec, controls,
+ ARRAY_SIZE(controls));
+ if (ret != 0)
+ dev_err(wm8994->codec.dev,
+ "Failed to add ReTune Mobile controls: %d\n", ret);
+}
+
+static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
+{
+ struct snd_soc_codec *codec = &wm8994->codec;
+ struct wm8994_pdata *pdata = wm8994->pdata;
+ int ret, i;
+
+ if (!pdata)
+ return;
+
+ wm_hubs_handle_analogue_pdata(codec, pdata->lineout1_diff,
+ pdata->lineout2_diff,
+ pdata->lineout1fb,
+ pdata->lineout2fb,
+ pdata->jd_scthr,
+ pdata->jd_thr,
+ pdata->micbias1_lvl,
+ pdata->micbias2_lvl);
+
+ dev_dbg(codec->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
+
+ if (pdata->num_drc_cfgs) {
+ struct snd_kcontrol_new controls[] = {
+ SOC_ENUM_EXT("AIF1DRC1 Mode", wm8994->drc_enum,
+ wm8994_get_drc_enum, wm8994_put_drc_enum),
+ SOC_ENUM_EXT("AIF1DRC2 Mode", wm8994->drc_enum,
+ wm8994_get_drc_enum, wm8994_put_drc_enum),
+ SOC_ENUM_EXT("AIF2DRC Mode", wm8994->drc_enum,
+ wm8994_get_drc_enum, wm8994_put_drc_enum),
+ };
+
+ /* We need an array of texts for the enum API */
+ wm8994->drc_texts = kmalloc(sizeof(char *)
+ * pdata->num_drc_cfgs, GFP_KERNEL);
+ if (!wm8994->drc_texts) {
+ dev_err(wm8994->codec.dev,
+ "Failed to allocate %d DRC config texts\n",
+ pdata->num_drc_cfgs);
+ return;
+ }
+
+ for (i = 0; i < pdata->num_drc_cfgs; i++)
+ wm8994->drc_texts[i] = pdata->drc_cfgs[i].name;
+
+ wm8994->drc_enum.max = pdata->num_drc_cfgs;
+ wm8994->drc_enum.texts = wm8994->drc_texts;
+
+ ret = snd_soc_add_controls(&wm8994->codec, controls,
+ ARRAY_SIZE(controls));
+ if (ret != 0)
+ dev_err(wm8994->codec.dev,
+ "Failed to add DRC mode controls: %d\n", ret);
+
+ for (i = 0; i < WM8994_NUM_DRC; i++)
+ wm8994_set_drc(codec, i);
+ }
+
+ dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
+ pdata->num_retune_mobile_cfgs);
+
+ if (pdata->num_retune_mobile_cfgs)
+ wm8994_handle_retune_mobile_pdata(wm8994);
+ else
+ snd_soc_add_controls(&wm8994->codec, wm8994_eq_controls,
+ ARRAY_SIZE(wm8994_eq_controls));
+}
+
+static int wm8994_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8994_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8994_codec;
+ codec = wm8994_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ return ret;
+ }
+
+ wm8994_handle_pdata(codec->private_data);
+
+ wm_hubs_add_analogue_controls(codec);
+ snd_soc_add_controls(codec, wm8994_snd_controls,
+ ARRAY_SIZE(wm8994_snd_controls));
+ snd_soc_dapm_new_controls(codec, wm8994_dapm_widgets,
+ ARRAY_SIZE(wm8994_dapm_widgets));
+ wm_hubs_add_analogue_routes(codec, 0, 0);
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ return 0;
+}
+
+static int wm8994_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8994 = {
+ .probe = wm8994_probe,
+ .remove = wm8994_remove,
+ .suspend = wm8994_suspend,
+ .resume = wm8994_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8994);
+
+static int wm8994_codec_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct wm8994_priv *wm8994;
+ struct snd_soc_codec *codec;
+ int i;
+ u16 rev;
+
+ if (wm8994_codec) {
+ dev_err(&pdev->dev, "Another WM8994 is registered\n");
+ return -EINVAL;
+ }
+
+ wm8994 = kzalloc(sizeof(struct wm8994_priv), GFP_KERNEL);
+ if (!wm8994) {
+ dev_err(&pdev->dev, "Failed to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ codec = &wm8994->codec;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8994;
+ codec->control_data = dev_get_drvdata(pdev->dev.parent);
+ codec->name = "WM8994";
+ codec->owner = THIS_MODULE;
+ codec->read = wm8994_read;
+ codec->write = wm8994_write;
+ codec->readable_register = wm8994_readable;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8994_set_bias_level;
+ codec->dai = &wm8994_dai[0];
+ codec->num_dai = 3;
+ codec->reg_cache_size = WM8994_MAX_REGISTER;
+ codec->reg_cache = &wm8994->reg_cache;
+ codec->dev = &pdev->dev;
+
+ wm8994->pdata = pdev->dev.parent->platform_data;
+
+ /* Fill the cache with physical values we inherited; don't reset */
+ ret = wm8994_bulk_read(codec->control_data, 0,
+ ARRAY_SIZE(wm8994->reg_cache) - 1,
+ codec->reg_cache);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to fill register cache: %d\n",
+ ret);
+ goto err;
+ }
+
+ /* Clear the cached values for unreadable/volatile registers to
+ * avoid potential confusion.
+ */
+ for (i = 0; i < ARRAY_SIZE(wm8994->reg_cache); i++)
+ if (wm8994_volatile(i) || !wm8994_readable(i))
+ wm8994->reg_cache[i] = 0;
+
+ /* Set revision-specific configuration */
+ rev = snd_soc_read(codec, WM8994_CHIP_REVISION);
+ switch (rev) {
+ case 2:
+ case 3:
+ wm8994->hubs.dcs_codes = -5;
+ wm8994->hubs.hp_startup_mode = 1;
+ break;
+ default:
+ break;
+ }
+
+
+ /* Remember if AIFnLRCLK is configured as a GPIO. This should be
+ * configured on init - if a system wants to do this dynamically
+ * at runtime we can deal with that then.
+ */
+ ret = wm8994_reg_read(codec->control_data, WM8994_GPIO_1);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read GPIO1 state: %d\n", ret);
+ goto err;
+ }
+ if ((ret & WM8994_GPN_FN_MASK) != WM8994_GP_FN_PIN_SPECIFIC) {
+ wm8994->lrclk_shared[0] = 1;
+ wm8994_dai[0].symmetric_rates = 1;
+ } else {
+ wm8994->lrclk_shared[0] = 0;
+ }
+
+ ret = wm8994_reg_read(codec->control_data, WM8994_GPIO_6);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read GPIO6 state: %d\n", ret);
+ goto err;
+ }
+ if ((ret & WM8994_GPN_FN_MASK) != WM8994_GP_FN_PIN_SPECIFIC) {
+ wm8994->lrclk_shared[1] = 1;
+ wm8994_dai[1].symmetric_rates = 1;
+ } else {
+ wm8994->lrclk_shared[1] = 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8994_dai); i++)
+ wm8994_dai[i].dev = codec->dev;
+
+ wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8994_codec = codec;
+
+ /* Latch volume updates (right only; we always do left then right). */
+ snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
+ WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
+ snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
+ WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
+ snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
+ WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
+ snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
+ WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
+ snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
+ WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
+ snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
+ WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
+ snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
+ WM8994_DAC1_VU, WM8994_DAC1_VU);
+ snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
+ WM8994_DAC2_VU, WM8994_DAC2_VU);
+
+ /* Set the low bit of the 3D stereo depth so TLV matches */
+ snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,
+ 1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT,
+ 1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT);
+ snd_soc_update_bits(codec, WM8994_AIF1_DAC2_FILTERS_2,
+ 1 << WM8994_AIF1DAC2_3D_GAIN_SHIFT,
+ 1 << WM8994_AIF1DAC2_3D_GAIN_SHIFT);
+ snd_soc_update_bits(codec, WM8994_AIF2_DAC_FILTERS_2,
+ 1 << WM8994_AIF2DAC_3D_GAIN_SHIFT,
+ 1 << WM8994_AIF2DAC_3D_GAIN_SHIFT);
+
+ wm8994_update_class_w(codec);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dais(wm8994_dai, ARRAY_SIZE(wm8994_dai));
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+ goto err_codec;
+ }
+
+ platform_set_drvdata(pdev, wm8994);
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8994);
+ return ret;
+}
+
+static int __devexit wm8994_codec_remove(struct platform_device *pdev)
+{
+ struct wm8994_priv *wm8994 = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = &wm8994->codec;
+
+ wm8994_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dais(wm8994_dai, ARRAY_SIZE(wm8994_dai));
+ snd_soc_unregister_codec(&wm8994->codec);
+ kfree(wm8994);
+ wm8994_codec = NULL;
+
+ return 0;
+}
+
+static struct platform_driver wm8994_codec_driver = {
+ .driver = {
+ .name = "wm8994-codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8994_codec_probe,
+ .remove = __devexit_p(wm8994_codec_remove),
+};
+
+static __init int wm8994_init(void)
+{
+ return platform_driver_register(&wm8994_codec_driver);
+}
+module_init(wm8994_init);
+
+static __exit void wm8994_exit(void)
+{
+ platform_driver_unregister(&wm8994_codec_driver);
+}
+module_exit(wm8994_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8994 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8994-codec");
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
new file mode 100644
index 0000000..0a5e142
--- /dev/null
+++ b/sound/soc/codecs/wm8994.h
@@ -0,0 +1,26 @@
+/*
+ * wm8994.h -- WM8994 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8994_H
+#define _WM8994_H
+
+#include <sound/soc.h>
+
+extern struct snd_soc_codec_device soc_codec_dev_wm8994;
+extern struct snd_soc_dai wm8994_dai[];
+
+/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */
+#define WM8994_SYSCLK_MCLK1 1
+#define WM8994_SYSCLK_MCLK2 2
+#define WM8994_SYSCLK_FLL1 3
+#define WM8994_SYSCLK_FLL2 4
+
+#define WM8994_FLL1 1
+#define WM8994_FLL2 2
+
+#endif
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index c58aab3..ceb86b4 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -23,13 +23,12 @@
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
+#include <sound/tlv.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include "wm9713.h"
-#define WM9713_VERSION "0.15"
-
struct wm9713_priv {
u32 pll_in; /* PLL input frequency */
};
@@ -115,15 +114,27 @@
SOC_ENUM_SINGLE(MICB_MUX, 0, 2, wm9713_micb_select), /* mic selection 19 */
};
+static const DECLARE_TLV_DB_SCALE(out_tlv, -4650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(main_tlv, -3450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(misc_tlv, -1500, 300, 0);
+static unsigned int mic_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(3000, 0, 0),
+};
+
static const struct snd_kcontrol_new wm9713_snd_ac97_controls[] = {
-SOC_DOUBLE("Speaker Playback Volume", AC97_MASTER, 8, 0, 31, 1),
+SOC_DOUBLE_TLV("Speaker Playback Volume", AC97_MASTER, 8, 0, 31, 1, out_tlv),
SOC_DOUBLE("Speaker Playback Switch", AC97_MASTER, 15, 7, 1, 1),
-SOC_DOUBLE("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1),
+SOC_DOUBLE_TLV("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1,
+ out_tlv),
SOC_DOUBLE("Headphone Playback Switch", AC97_HEADPHONE, 15, 7, 1, 1),
-SOC_DOUBLE("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1),
-SOC_DOUBLE("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1),
-SOC_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1),
-SOC_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1),
+SOC_DOUBLE_TLV("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1, main_tlv),
+SOC_DOUBLE_TLV("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1, main_tlv),
+SOC_SINGLE_TLV("Mic 1 Volume", AC97_MIC, 8, 31, 1, main_tlv),
+SOC_SINGLE_TLV("Mic 2 Volume", AC97_MIC, 0, 31, 1, main_tlv),
+SOC_SINGLE_TLV("Mic 1 Preamp Volume", AC97_3D_CONTROL, 10, 3, 0, mic_tlv),
+SOC_SINGLE_TLV("Mic 2 Preamp Volume", AC97_3D_CONTROL, 12, 3, 0, mic_tlv),
SOC_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0),
SOC_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1),
@@ -133,7 +144,7 @@
SOC_DOUBLE("Capture Volume", AC97_CD, 8, 0, 31, 0),
SOC_SINGLE("Capture ZC Switch", AC97_CD, 7, 1, 0),
-SOC_SINGLE("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1),
+SOC_SINGLE_TLV("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1, misc_tlv),
SOC_SINGLE("Capture to Mono Boost (+20dB) Switch", AC97_VIDEO, 8, 1, 0),
SOC_SINGLE("Capture ADC Boost (+20dB) Switch", AC97_VIDEO, 6, 1, 0),
@@ -154,28 +165,43 @@
SOC_SINGLE("Out4 Playback Switch", AC97_MASTER_MONO, 15, 1, 1),
SOC_SINGLE("Out4 Playback ZC Switch", AC97_MASTER_MONO, 14, 1, 0),
-SOC_SINGLE("Out4 Playback Volume", AC97_MASTER_MONO, 8, 63, 1),
+SOC_SINGLE_TLV("Out4 Playback Volume", AC97_MASTER_MONO, 8, 31, 1, out_tlv),
SOC_SINGLE("Out3 Playback Switch", AC97_MASTER_MONO, 7, 1, 1),
SOC_SINGLE("Out3 Playback ZC Switch", AC97_MASTER_MONO, 6, 1, 0),
-SOC_SINGLE("Out3 Playback Volume", AC97_MASTER_MONO, 0, 63, 1),
+SOC_SINGLE_TLV("Out3 Playback Volume", AC97_MASTER_MONO, 0, 31, 1, out_tlv),
-SOC_SINGLE("Mono Capture Volume", AC97_MASTER_TONE, 8, 31, 1),
+SOC_SINGLE_TLV("Mono Capture Volume", AC97_MASTER_TONE, 8, 31, 1, main_tlv),
SOC_SINGLE("Mono Playback Switch", AC97_MASTER_TONE, 7, 1, 1),
SOC_SINGLE("Mono Playback ZC Switch", AC97_MASTER_TONE, 6, 1, 0),
-SOC_SINGLE("Mono Playback Volume", AC97_MASTER_TONE, 0, 31, 1),
+SOC_SINGLE_TLV("Mono Playback Volume", AC97_MASTER_TONE, 0, 31, 1, out_tlv),
-SOC_SINGLE("Beep Playback Headphone Volume", AC97_AUX, 12, 7, 1),
-SOC_SINGLE("Beep Playback Speaker Volume", AC97_AUX, 8, 7, 1),
-SOC_SINGLE("Beep Playback Mono Volume", AC97_AUX, 4, 7, 1),
+SOC_SINGLE_TLV("Headphone Mixer Beep Playback Volume", AC97_AUX, 12, 7, 1,
+ misc_tlv),
+SOC_SINGLE_TLV("Speaker Mixer Beep Playback Volume", AC97_AUX, 8, 7, 1,
+ misc_tlv),
+SOC_SINGLE_TLV("Mono Mixer Beep Playback Volume", AC97_AUX, 4, 7, 1, misc_tlv),
-SOC_SINGLE("Voice Playback Headphone Volume", AC97_PCM, 12, 7, 1),
+SOC_SINGLE_TLV("Voice Playback Headphone Volume", AC97_PCM, 12, 7, 1,
+ misc_tlv),
SOC_SINGLE("Voice Playback Master Volume", AC97_PCM, 8, 7, 1),
SOC_SINGLE("Voice Playback Mono Volume", AC97_PCM, 4, 7, 1),
+SOC_SINGLE_TLV("Headphone Mixer Aux Playback Volume", AC97_REC_SEL, 12, 7, 1,
+ misc_tlv),
+
+SOC_SINGLE_TLV("Speaker Mixer Voice Playback Volume", AC97_PCM, 8, 7, 1,
+ misc_tlv),
+SOC_SINGLE_TLV("Speaker Mixer Aux Playback Volume", AC97_REC_SEL, 8, 7, 1,
+ misc_tlv),
+
+SOC_SINGLE_TLV("Mono Mixer Voice Playback Volume", AC97_PCM, 4, 7, 1,
+ misc_tlv),
+SOC_SINGLE_TLV("Mono Mixer Aux Playback Volume", AC97_REC_SEL, 4, 7, 1,
+ misc_tlv),
+
SOC_SINGLE("Aux Playback Headphone Volume", AC97_REC_SEL, 12, 7, 1),
SOC_SINGLE("Aux Playback Master Volume", AC97_REC_SEL, 8, 7, 1),
-SOC_SINGLE("Aux Playback Mono Volume", AC97_REC_SEL, 4, 7, 1),
SOC_ENUM("Bass Control", wm9713_enum[16]),
SOC_SINGLE("Bass Cut-off Switch", AC97_GENERAL_PURPOSE, 12, 1, 1),
@@ -1186,8 +1212,6 @@
struct snd_soc_codec *codec;
int ret = 0, reg;
- printk(KERN_INFO "WM9713/WM9714 SoC Audio Codec %s\n", WM9713_VERSION);
-
socdev->card->codec = kzalloc(sizeof(struct snd_soc_codec),
GFP_KERNEL);
if (socdev->card->codec == NULL)
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index d73c305..0ad9f5d 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -68,24 +68,77 @@
int count = 0;
dev_dbg(codec->dev, "Waiting for DC servo...\n");
+
do {
count++;
msleep(1);
reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
- dev_dbg(codec->dev, "DC servo status: %x\n", reg);
- } while ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
- != WM8993_DCS_CAL_COMPLETE_MASK && count < 1000);
+ dev_dbg(codec->dev, "DC servo: %x\n", reg);
+ } while (reg & WM8993_DCS_DATAPATH_BUSY);
- if ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
- != WM8993_DCS_CAL_COMPLETE_MASK)
+ if (reg & WM8993_DCS_DATAPATH_BUSY)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
}
/*
+ * Startup calibration of the DC servo
+ */
+static void calibrate_dc_servo(struct snd_soc_codec *codec)
+{
+ struct wm_hubs_data *hubs = codec->private_data;
+ u16 reg, dcs_cfg;
+
+ /* Set for 32 series updates */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
+ WM8993_DCS_SERIES_NO_01_MASK,
+ 32 << WM8993_DCS_SERIES_NO_01_SHIFT);
+
+ /* Enable the DC servo. Write all bits to avoid triggering startup
+ * or write calibration.
+ */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ 0xFFFF,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1 |
+ WM8993_DCS_TRIG_SERIES_1 |
+ WM8993_DCS_TRIG_SERIES_0);
+
+ wait_for_dc_servo(codec);
+
+ /* Apply correction to DC servo result */
+ if (hubs->dcs_codes) {
+ dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
+ hubs->dcs_codes);
+
+ /* HPOUT1L */
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) &
+ WM8993_DCS_INTEG_CHAN_0_MASK;;
+ reg += hubs->dcs_codes;
+ dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+
+ /* HPOUT1R */
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) &
+ WM8993_DCS_INTEG_CHAN_1_MASK;
+ reg += hubs->dcs_codes;
+ dcs_cfg |= reg;
+
+ /* Do it */
+ snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ WM8993_DCS_TRIG_DAC_WR_0 |
+ WM8993_DCS_TRIG_DAC_WR_1,
+ WM8993_DCS_TRIG_DAC_WR_0 |
+ WM8993_DCS_TRIG_DAC_WR_1);
+
+ wait_for_dc_servo(codec);
+ }
+}
+
+/*
* Update the DC servo calibration on gain changes
*/
static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int ret;
@@ -251,6 +304,47 @@
line_tlv),
};
+static int hp_supply_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm_hubs_data *hubs = codec->private_data;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ switch (hubs->hp_startup_mode) {
+ case 0:
+ break;
+ case 1:
+ /* Enable the headphone amp */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA |
+ WM8993_HPOUT1R_ENA,
+ WM8993_HPOUT1L_ENA |
+ WM8993_HPOUT1R_ENA);
+
+ /* Enable the second stage */
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1R_DLY,
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1R_DLY);
+ break;
+ default:
+ dev_err(codec->dev, "Unknown HP startup mode %d\n",
+ hubs->hp_startup_mode);
+ break;
+ }
+
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
static int hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -271,14 +365,11 @@
reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY;
snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
- /* Start the DC servo */
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- 0xFFFF,
- WM8993_DCS_ENA_CHAN_0 |
- WM8993_DCS_ENA_CHAN_1 |
- WM8993_DCS_TRIG_STARTUP_1 |
- WM8993_DCS_TRIG_STARTUP_0);
- wait_for_dc_servo(codec);
+ /* Smallest supported update interval */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
+ WM8993_DCS_TIMER_PERIOD_01_MASK, 1);
+
+ calibrate_dc_servo(codec);
reg |= WM8993_HPOUT1R_OUTP | WM8993_HPOUT1R_RMV_SHORT |
WM8993_HPOUT1L_OUTP | WM8993_HPOUT1L_RMV_SHORT;
@@ -286,23 +377,19 @@
break;
case SND_SOC_DAPM_PRE_PMD:
- reg &= ~(WM8993_HPOUT1L_RMV_SHORT |
- WM8993_HPOUT1L_DLY |
- WM8993_HPOUT1L_OUTP |
- WM8993_HPOUT1R_RMV_SHORT |
- WM8993_HPOUT1R_DLY |
- WM8993_HPOUT1R_OUTP);
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1R_DLY |
+ WM8993_HPOUT1L_RMV_SHORT |
+ WM8993_HPOUT1R_RMV_SHORT, 0);
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- 0xffff, 0);
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1L_OUTP |
+ WM8993_HPOUT1R_OUTP, 0);
- snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
0);
-
- snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
- WM8993_CP_ENA, 0);
break;
}
@@ -473,6 +560,8 @@
SND_SOC_DAPM_PGA("Left Output PGA", WM8993_POWER_MANAGEMENT_3, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("Headphone Supply", SND_SOC_NOPM, 0, 0, hp_supply_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0,
NULL, 0,
hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
@@ -626,6 +715,7 @@
{ "Headphone PGA", NULL, "Left Headphone Mux" },
{ "Headphone PGA", NULL, "Right Headphone Mux" },
{ "Headphone PGA", NULL, "CLK_SYS" },
+ { "Headphone PGA", NULL, "Headphone Supply" },
{ "HPOUT1L", NULL, "Headphone PGA" },
{ "HPOUT1R", NULL, "Headphone PGA" },
@@ -753,6 +843,12 @@
WM8993_LINEOUT2_MODE,
WM8993_LINEOUT2_MODE);
+ /* If the line outputs are differential then we aren't presenting
+ * VMID as an output and can disable it.
+ */
+ if (lineout1_diff && lineout2_diff)
+ codec->idle_bias_off = 1;
+
if (lineout1fb)
snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h
index 36d3fba..420104f 100644
--- a/sound/soc/codecs/wm_hubs.h
+++ b/sound/soc/codecs/wm_hubs.h
@@ -18,6 +18,12 @@
extern const unsigned int wm_hubs_spkmix_tlv[];
+/* This *must* be the first element of the codec->private_data struct */
+struct wm_hubs_data {
+ int dcs_codes;
+ int hp_startup_mode;
+};
+
extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
extern int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *,
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 0a302e1..ab6518d 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -767,14 +767,26 @@
int ret = 0;
switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (!dev->clk_active) {
+ clk_enable(dev->clk);
+ dev->clk_active = 1;
+ }
davinci_mcasp_start(dev, substream->stream);
break;
- case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
+ davinci_mcasp_stop(dev, substream->stream);
+ if (dev->clk_active) {
+ clk_disable(dev->clk);
+ dev->clk_active = 0;
+ }
+
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
davinci_mcasp_stop(dev, substream->stream);
break;
@@ -866,6 +878,7 @@
}
clk_enable(dev->clk);
+ dev->clk_active = 1;
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
dev->op_mode = pdata->op_mode;
diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h
index 582c924..e755b51 100644
--- a/sound/soc/davinci/davinci-mcasp.h
+++ b/sound/soc/davinci/davinci-mcasp.h
@@ -44,6 +44,7 @@
int sample_rate;
struct clk *clk;
unsigned int codec_fmt;
+ u8 clk_active;
/* McASP specific data */
int tdm_slots;
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index ad4d7f4..80c7fdf 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -49,7 +49,7 @@
static struct snd_pcm_hardware pcm_hardware_playback = {
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE),
+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
.formats = (SNDRV_PCM_FMTBIT_S16_LE),
.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index a700562e..c7d0fd9 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -1,21 +1,13 @@
-config SND_MX1_MX2_SOC
- tristate "SoC Audio for Freecale i.MX1x i.MX2x CPUs"
- depends on ARCH_MX2 || ARCH_MX1
+config SND_IMX_SOC
+ tristate "SoC Audio for Freescale i.MX CPUs"
+ depends on ARCH_MXC && BROKEN
select SND_PCM
+ select FIQ
+ select SND_SOC_AC97_BUS
help
Say Y or M if you want to add support for codecs attached to
- the MX1 or MX2 SSI interface.
+ the i.MX SSI interface.
config SND_MXC_SOC_SSI
tristate
-config SND_SOC_MX27VIS_WM8974
- tristate "SoC Audio support for MX27 - WM8974 Visstrim_sm10 board"
- depends on SND_MX1_MX2_SOC && MACH_MX27 && MACH_IMX27_VISSTRIM_M10
- select SND_MXC_SOC_SSI
- select SND_SOC_WM8974
- help
- Say Y if you want to add support for SoC audio on Visstrim SM10
- board with WM8974.
-
-
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
index c2ffd2c..9f8bb92 100644
--- a/sound/soc/imx/Makefile
+++ b/sound/soc/imx/Makefile
@@ -1,10 +1,12 @@
# i.MX Platform Support
-snd-soc-mx1_mx2-objs := mx1_mx2-pcm.o
-snd-soc-mxc-ssi-objs := mxc-ssi.o
+snd-soc-imx-objs := imx-ssi.o imx-pcm-fiq.o
-obj-$(CONFIG_SND_MX1_MX2_SOC) += snd-soc-mx1_mx2.o
-obj-$(CONFIG_SND_MXC_SOC_SSI) += snd-soc-mxc-ssi.o
+ifdef CONFIG_MACH_MX27
+snd-soc-imx-objs += imx-pcm-dma-mx2.o
+endif
+
+obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
# i.MX Machine Support
-snd-soc-mx27vis-wm8974-objs := mx27vis_wm8974.o
-obj-$(CONFIG_SND_SOC_MX27VIS_WM8974) += snd-soc-mx27vis-wm8974.o
+snd-soc-phycore-ac97-objs := phycore-ac97.o
+obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
new file mode 100644
index 0000000..19452e4
--- /dev/null
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -0,0 +1,313 @@
+/*
+ * imx-pcm-dma-mx2.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is based on code copyrighted by Freescale,
+ * Liam Girdwood, Javier Martin and probably others.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/dma-mx1-mx2.h>
+
+#include "imx-ssi.h"
+
+struct imx_pcm_runtime_data {
+ int sg_count;
+ struct scatterlist *sg_list;
+ int period;
+ int periods;
+ unsigned long dma_addr;
+ int dma;
+ struct snd_pcm_substream *substream;
+ unsigned long offset;
+ unsigned long size;
+ unsigned long period_cnt;
+ void *buf;
+ int period_time;
+};
+
+/* Called by the DMA framework when a period has elapsed */
+static void imx_ssi_dma_progression(int channel, void *data,
+ struct scatterlist *sg)
+{
+ struct snd_pcm_substream *substream = data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ if (!sg)
+ return;
+
+ runtime = iprtd->substream->runtime;
+
+ iprtd->offset = sg->dma_address - runtime->dma_addr;
+
+ snd_pcm_period_elapsed(iprtd->substream);
+}
+
+static void imx_ssi_dma_callback(int channel, void *data)
+{
+ pr_err("%s shouldn't be called\n", __func__);
+}
+
+static void snd_imx_dma_err_callback(int channel, void *data, int err)
+{
+ pr_err("DMA error callback called\n");
+
+ pr_err("DMA timeout on channel %d -%s%s%s%s\n",
+ channel,
+ err & IMX_DMA_ERR_BURST ? " burst" : "",
+ err & IMX_DMA_ERR_REQUEST ? " request" : "",
+ err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+ err & IMX_DMA_ERR_BUFFER ? " buffer" : "");
+}
+
+static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ int ret;
+
+ iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
+ if (iprtd->dma < 0) {
+ pr_err("Failed to claim the audio DMA\n");
+ return -ENODEV;
+ }
+
+ ret = imx_dma_setup_handlers(iprtd->dma,
+ imx_ssi_dma_callback,
+ snd_imx_dma_err_callback, substream);
+ if (ret)
+ goto out;
+
+ ret = imx_dma_setup_progression_handler(iprtd->dma,
+ imx_ssi_dma_progression);
+ if (ret) {
+ pr_err("Failed to setup the DMA handler\n");
+ goto out;
+ }
+
+ ret = imx_dma_config_channel(iprtd->dma,
+ IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+ dma_params->dma, 1);
+ if (ret < 0) {
+ pr_err("Cannot configure DMA channel: %d\n", ret);
+ goto out;
+ }
+
+ imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2);
+
+ return 0;
+out:
+ imx_dma_free(iprtd->dma);
+ return ret;
+}
+
+static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ int i;
+ unsigned long dma_addr;
+
+ imx_ssi_dma_alloc(substream);
+
+ iprtd->size = params_buffer_bytes(params);
+ iprtd->periods = params_periods(params);
+ iprtd->period = params_period_bytes(params);
+ iprtd->offset = 0;
+ iprtd->period_time = HZ / (params_rate(params) /
+ params_period_size(params));
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ if (iprtd->sg_count != iprtd->periods) {
+ kfree(iprtd->sg_list);
+
+ iprtd->sg_list = kcalloc(iprtd->periods + 1,
+ sizeof(struct scatterlist), GFP_KERNEL);
+ if (!iprtd->sg_list)
+ return -ENOMEM;
+ iprtd->sg_count = iprtd->periods + 1;
+ }
+
+ sg_init_table(iprtd->sg_list, iprtd->sg_count);
+ dma_addr = runtime->dma_addr;
+
+ for (i = 0; i < iprtd->periods; i++) {
+ iprtd->sg_list[i].page_link = 0;
+ iprtd->sg_list[i].offset = 0;
+ iprtd->sg_list[i].dma_address = dma_addr;
+ iprtd->sg_list[i].length = iprtd->period;
+ dma_addr += iprtd->period;
+ }
+
+ /* close the loop */
+ iprtd->sg_list[iprtd->sg_count - 1].offset = 0;
+ iprtd->sg_list[iprtd->sg_count - 1].length = 0;
+ iprtd->sg_list[iprtd->sg_count - 1].page_link =
+ ((unsigned long) iprtd->sg_list | 0x01) & ~0x02;
+ return 0;
+}
+
+static int snd_imx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ if (iprtd->dma >= 0) {
+ imx_dma_free(iprtd->dma);
+ iprtd->dma = -EINVAL;
+ }
+
+ kfree(iprtd->sg_list);
+ iprtd->sg_list = NULL;
+
+ return 0;
+}
+
+static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ int err;
+
+ iprtd->substream = substream;
+ iprtd->buf = (unsigned int *)substream->dma_buffer.area;
+ iprtd->period_cnt = 0;
+
+ pr_debug("%s: buf: %p period: %d periods: %d\n",
+ __func__, iprtd->buf, iprtd->period, iprtd->periods);
+
+ err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
+ IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ DMA_MODE_WRITE : DMA_MODE_READ);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ imx_dma_enable(iprtd->dma);
+
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ imx_dma_disable(iprtd->dma);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ return bytes_to_frames(substream->runtime, iprtd->offset);
+}
+
+static struct snd_pcm_hardware snd_imx_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rate_min = 8000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
+ .period_bytes_min = 128,
+ .period_bytes_max = 16 * 1024,
+ .periods_min = 2,
+ .periods_max = 255,
+ .fifo_size = 0,
+};
+
+static int snd_imx_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd;
+ int ret;
+
+ iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+ runtime->private_data = iprtd;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+ return 0;
+}
+
+static struct snd_pcm_ops imx_pcm_ops = {
+ .open = snd_imx_open,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_imx_pcm_hw_params,
+ .hw_free = snd_imx_pcm_hw_free,
+ .prepare = snd_imx_pcm_prepare,
+ .trigger = snd_imx_pcm_trigger,
+ .pointer = snd_imx_pcm_pointer,
+ .mmap = snd_imx_pcm_mmap,
+};
+
+static struct snd_soc_platform imx_soc_platform_dma = {
+ .name = "imx-audio",
+ .pcm_ops = &imx_pcm_ops,
+ .pcm_new = imx_pcm_new,
+ .pcm_free = imx_pcm_free,
+};
+
+struct snd_soc_platform *imx_ssi_dma_mx2_init(struct platform_device *pdev,
+ struct imx_ssi *ssi)
+{
+ ssi->dma_params_tx.burstsize = DMA_TXFIFO_BURST;
+ ssi->dma_params_rx.burstsize = DMA_RXFIFO_BURST;
+
+ return &imx_soc_platform_dma;
+}
+
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
new file mode 100644
index 0000000..d9cb984
--- /dev/null
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -0,0 +1,297 @@
+/*
+ * imx-pcm-fiq.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is based on code copyrighted by Freescale,
+ * Liam Girdwood, Javier Martin and probably others.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/fiq.h>
+
+#include <mach/ssi.h>
+
+#include "imx-ssi.h"
+
+struct imx_pcm_runtime_data {
+ int period;
+ int periods;
+ unsigned long offset;
+ unsigned long last_offset;
+ unsigned long size;
+ struct timer_list timer;
+ int poll_time;
+};
+
+static inline void imx_ssi_set_next_poll(struct imx_pcm_runtime_data *iprtd)
+{
+ iprtd->timer.expires = jiffies + iprtd->poll_time;
+}
+
+static void imx_ssi_timer_callback(unsigned long data)
+{
+ struct snd_pcm_substream *substream = (void *)data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ struct pt_regs regs;
+ unsigned long delta;
+
+ get_fiq_regs(®s);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ iprtd->offset = regs.ARM_r8 & 0xffff;
+ else
+ iprtd->offset = regs.ARM_r9 & 0xffff;
+
+ /* How much data have we transferred since the last period report? */
+ if (iprtd->offset >= iprtd->last_offset)
+ delta = iprtd->offset - iprtd->last_offset;
+ else
+ delta = runtime->buffer_size + iprtd->offset
+ - iprtd->last_offset;
+
+ /* If we've transferred at least a period then report it and
+ * reset our poll time */
+ if (delta >= runtime->period_size) {
+ snd_pcm_period_elapsed(substream);
+ iprtd->last_offset = iprtd->offset;
+
+ imx_ssi_set_next_poll(iprtd);
+ }
+
+ /* Restart the timer; if we didn't report we'll run on the next tick */
+ add_timer(&iprtd->timer);
+
+}
+
+static struct fiq_handler fh = {
+ .name = DRV_NAME,
+};
+
+static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ iprtd->size = params_buffer_bytes(params);
+ iprtd->periods = params_periods(params);
+ iprtd->period = params_period_bytes(params) ;
+ iprtd->offset = 0;
+ iprtd->last_offset = 0;
+ iprtd->poll_time = HZ / (params_rate(params) / params_period_size(params));
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ return 0;
+}
+
+static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ struct pt_regs regs;
+
+ get_fiq_regs(®s);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regs.ARM_r8 = (iprtd->period * iprtd->periods - 1) << 16;
+ else
+ regs.ARM_r9 = (iprtd->period * iprtd->periods - 1) << 16;
+
+ set_fiq_regs(®s);
+
+ return 0;
+}
+
+static int fiq_enable;
+static int imx_pcm_fiq;
+
+static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ imx_ssi_set_next_poll(iprtd);
+ add_timer(&iprtd->timer);
+ if (++fiq_enable == 1)
+ enable_fiq(imx_pcm_fiq);
+
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ del_timer(&iprtd->timer);
+ if (--fiq_enable == 0)
+ disable_fiq(imx_pcm_fiq);
+
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ return bytes_to_frames(substream->runtime, iprtd->offset);
+}
+
+static struct snd_pcm_hardware snd_imx_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rate_min = 8000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
+ .period_bytes_min = 128,
+ .period_bytes_max = 16 * 1024,
+ .periods_min = 2,
+ .periods_max = 255,
+ .fifo_size = 0,
+};
+
+static int snd_imx_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd;
+ int ret;
+
+ iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+ runtime->private_data = iprtd;
+
+ init_timer(&iprtd->timer);
+ iprtd->timer.data = (unsigned long)substream;
+ iprtd->timer.function = imx_ssi_timer_callback;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+ return 0;
+}
+
+static int snd_imx_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+ del_timer_sync(&iprtd->timer);
+ kfree(iprtd);
+
+ return 0;
+}
+
+static struct snd_pcm_ops imx_pcm_ops = {
+ .open = snd_imx_open,
+ .close = snd_imx_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_imx_pcm_hw_params,
+ .prepare = snd_imx_pcm_prepare,
+ .trigger = snd_imx_pcm_trigger,
+ .pointer = snd_imx_pcm_pointer,
+ .mmap = snd_imx_pcm_mmap,
+};
+
+static int imx_pcm_fiq_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ int ret;
+
+ ret = imx_pcm_new(card, dai, pcm);
+ if (ret)
+ return ret;
+
+ if (dai->playback.channels_min) {
+ struct snd_pcm_substream *substream =
+ pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+
+ imx_ssi_fiq_tx_buffer = (unsigned long)buf->area;
+ }
+
+ if (dai->capture.channels_min) {
+ struct snd_pcm_substream *substream =
+ pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+
+ imx_ssi_fiq_rx_buffer = (unsigned long)buf->area;
+ }
+
+ set_fiq_handler(&imx_ssi_fiq_start,
+ &imx_ssi_fiq_end - &imx_ssi_fiq_start);
+
+ return 0;
+}
+
+static struct snd_soc_platform imx_soc_platform_fiq = {
+ .pcm_ops = &imx_pcm_ops,
+ .pcm_new = imx_pcm_fiq_new,
+ .pcm_free = imx_pcm_free,
+};
+
+struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
+ struct imx_ssi *ssi)
+{
+ int ret = 0;
+
+ ret = claim_fiq(&fh);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to claim fiq: %d", ret);
+ return ERR_PTR(ret);
+ }
+
+ mxc_set_irq_fiq(ssi->irq, 1);
+
+ imx_pcm_fiq = ssi->irq;
+
+ imx_ssi_fiq_base = (unsigned long)ssi->base;
+
+ ssi->dma_params_tx.burstsize = 4;
+ ssi->dma_params_rx.burstsize = 6;
+
+ return &imx_soc_platform_fiq;
+}
+
+void imx_ssi_fiq_exit(struct platform_device *pdev,
+ struct imx_ssi *ssi)
+{
+ mxc_set_irq_fiq(ssi->irq, 0);
+ release_fiq(&fh);
+}
+
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
new file mode 100644
index 0000000..56f46a7
--- /dev/null
+++ b/sound/soc/imx/imx-ssi.c
@@ -0,0 +1,758 @@
+/*
+ * imx-ssi.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is based on code copyrighted by Freescale,
+ * Liam Girdwood, Javier Martin and probably others.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * The i.MX SSI core has some nasty limitations in AC97 mode. While most
+ * sane processor vendors have a FIFO per AC97 slot, the i.MX has only
+ * one FIFO which combines all valid receive slots. We cannot even select
+ * which slots we want to receive. The WM9712 with which this driver
+ * was developped with always sends GPIO status data in slot 12 which
+ * we receive in our (PCM-) data stream. The only chance we have is to
+ * manually skip this data in the FIQ handler. With sampling rates different
+ * from 48000Hz not every frame has valid receive data, so the ratio
+ * between pcm data and GPIO status data changes. Our FIQ handler is not
+ * able to handle this, hence this driver only works with 48000Hz sampling
+ * rate.
+ * Reading and writing AC97 registers is another challange. The core
+ * provides us status bits when the read register is updated with *another*
+ * value. When we read the same register two times (and the register still
+ * contains the same value) these status bits are not set. We work
+ * around this by not polling these bits but only wait a fixed delay.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/ssi.h>
+#include <mach/hardware.h>
+
+#include "imx-ssi.h"
+
+#define SSI_SACNT_DEFAULT (SSI_SACNT_AC97EN | SSI_SACNT_FV)
+
+/*
+ * SSI Network Mode or TDM slots configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ u32 sccr;
+
+ sccr = readl(ssi->base + SSI_STCCR);
+ sccr &= ~SSI_STCCR_DC_MASK;
+ sccr |= SSI_STCCR_DC(slots - 1);
+ writel(sccr, ssi->base + SSI_STCCR);
+
+ sccr = readl(ssi->base + SSI_SRCCR);
+ sccr &= ~SSI_STCCR_DC_MASK;
+ sccr |= SSI_STCCR_DC(slots - 1);
+ writel(sccr, ssi->base + SSI_SRCCR);
+
+ writel(tx_mask, ssi->base + SSI_STMSK);
+ writel(rx_mask, ssi->base + SSI_SRMSK);
+
+ return 0;
+}
+
+/*
+ * SSI DAI format configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ * Note: We don't use the I2S modes but instead manually configure the
+ * SSI for I2S because the I2S mode is only a register preset.
+ */
+static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ u32 strcr = 0, scr;
+
+ scr = readl(ssi->base + SSI_SCR) & ~(SSI_SCR_SYN | SSI_SCR_NET);
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* data on rising edge of bclk, frame low 1clk before data */
+ strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+ scr |= SSI_SCR_NET;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* data on rising edge of bclk, frame high with data */
+ strcr |= SSI_STCR_TXBIT0;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /* data on rising edge of bclk, frame high with data */
+ strcr |= SSI_STCR_TFSL;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /* data on rising edge of bclk, frame high 1clk before data */
+ strcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ break;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ strcr |= SSI_STCR_TFSI;
+ strcr &= ~SSI_STCR_TSCKP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ strcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ strcr &= ~SSI_STCR_TFSI;
+ strcr |= SSI_STCR_TSCKP;
+ break;
+ }
+
+ /* DAI clock master masks */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ default:
+ /* Master mode not implemented, needs handling of clocks. */
+ return -EINVAL;
+ }
+
+ strcr |= SSI_STCR_TFEN0;
+
+ writel(strcr, ssi->base + SSI_STCR);
+ writel(strcr, ssi->base + SSI_SRCR);
+ writel(scr, ssi->base + SSI_SCR);
+
+ return 0;
+}
+
+/*
+ * SSI system clock configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ u32 scr;
+
+ scr = readl(ssi->base + SSI_SCR);
+
+ switch (clk_id) {
+ case IMX_SSP_SYS_CLK:
+ if (dir == SND_SOC_CLOCK_OUT)
+ scr |= SSI_SCR_SYS_CLK_EN;
+ else
+ scr &= ~SSI_SCR_SYS_CLK_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(scr, ssi->base + SSI_SCR);
+
+ return 0;
+}
+
+/*
+ * SSI Clock dividers
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ u32 stccr, srccr;
+
+ stccr = readl(ssi->base + SSI_STCCR);
+ srccr = readl(ssi->base + SSI_SRCCR);
+
+ switch (div_id) {
+ case IMX_SSI_TX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ case IMX_SSI_RX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(stccr, ssi->base + SSI_STCCR);
+ writel(srccr, ssi->base + SSI_SRCCR);
+
+ return 0;
+}
+
+/*
+ * Should only be called when port is inactive (i.e. SSIEN = 0),
+ * although can be called multiple times by upper layers.
+ */
+static int imx_ssi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ u32 reg, sccr;
+
+ /* Tx/Rx config */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ reg = SSI_STCCR;
+ cpu_dai->dma_data = &ssi->dma_params_tx;
+ } else {
+ reg = SSI_SRCCR;
+ cpu_dai->dma_data = &ssi->dma_params_rx;
+ }
+
+ sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK;
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ sccr |= SSI_SRCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ sccr |= SSI_SRCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ sccr |= SSI_SRCCR_WL(24);
+ break;
+ }
+
+ writel(sccr, ssi->base + reg);
+
+ return 0;
+}
+
+static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct imx_ssi *ssi = cpu_dai->private_data;
+ unsigned int sier_bits, sier;
+ unsigned int scr;
+
+ scr = readl(ssi->base + SSI_SCR);
+ sier = readl(ssi->base + SSI_SIER);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (ssi->flags & IMX_SSI_DMA)
+ sier_bits = SSI_SIER_TDMAE;
+ else
+ sier_bits = SSI_SIER_TIE | SSI_SIER_TFE0_EN;
+ } else {
+ if (ssi->flags & IMX_SSI_DMA)
+ sier_bits = SSI_SIER_RDMAE;
+ else
+ sier_bits = SSI_SIER_RIE | SSI_SIER_RFF0_EN;
+ }
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr |= SSI_SCR_TE;
+ else
+ scr |= SSI_SCR_RE;
+ sier |= sier_bits;
+
+ if (++ssi->enabled == 1)
+ scr |= SSI_SCR_SSIEN;
+
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr &= ~SSI_SCR_TE;
+ else
+ scr &= ~SSI_SCR_RE;
+ sier &= ~sier_bits;
+
+ if (--ssi->enabled == 0)
+ scr &= ~SSI_SCR_SSIEN;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (!(ssi->flags & IMX_SSI_USE_AC97))
+ /* rx/tx are always enabled to access ac97 registers */
+ writel(scr, ssi->base + SSI_SCR);
+
+ writel(sier, ssi->base + SSI_SIER);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
+ .hw_params = imx_ssi_hw_params,
+ .set_fmt = imx_ssi_set_dai_fmt,
+ .set_clkdiv = imx_ssi_set_dai_clkdiv,
+ .set_sysclk = imx_ssi_set_dai_sysclk,
+ .set_tdm_slot = imx_ssi_set_dai_tdm_slot,
+ .trigger = imx_ssi_trigger,
+};
+
+static struct snd_soc_dai imx_ssi_dai = {
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &imx_ssi_pcm_dai_ops,
+};
+
+int snd_imx_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret;
+
+ ret = dma_mmap_coherent(NULL, vma, runtime->dma_area,
+ runtime->dma_addr, runtime->dma_bytes);
+
+ pr_debug("%s: ret: %d %p 0x%08x 0x%08x\n", __func__, ret,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+ return ret;
+}
+
+static int imx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = IMX_SSI_DMABUF_SIZE;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area)
+ return -ENOMEM;
+ buf->bytes = size;
+
+ return 0;
+}
+
+static u64 imx_pcm_dmamask = DMA_BIT_MASK(32);
+
+int imx_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &imx_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ if (dai->playback.channels_min) {
+ ret = imx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = imx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+void imx_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_writecombine(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+struct snd_soc_platform imx_soc_platform = {
+ .name = "imx-audio",
+};
+EXPORT_SYMBOL_GPL(imx_soc_platform);
+
+static struct snd_soc_dai imx_ac97_dai = {
+ .name = "AC97",
+ .ac97_control = 1,
+ .playback = {
+ .stream_name = "AC97 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "AC97 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &imx_ssi_pcm_dai_ops,
+};
+
+static void setup_channel_to_ac97(struct imx_ssi *imx_ssi)
+{
+ void __iomem *base = imx_ssi->base;
+
+ writel(0x0, base + SSI_SCR);
+ writel(0x0, base + SSI_STCR);
+ writel(0x0, base + SSI_SRCR);
+
+ writel(SSI_SCR_SYN | SSI_SCR_NET, base + SSI_SCR);
+
+ writel(SSI_SFCSR_RFWM0(8) |
+ SSI_SFCSR_TFWM0(8) |
+ SSI_SFCSR_RFWM1(8) |
+ SSI_SFCSR_TFWM1(8), base + SSI_SFCSR);
+
+ writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_STCCR);
+ writel(SSI_STCCR_WL(16) | SSI_STCCR_DC(12), base + SSI_SRCCR);
+
+ writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN, base + SSI_SCR);
+ writel(SSI_SOR_WAIT(3), base + SSI_SOR);
+
+ writel(SSI_SCR_SYN | SSI_SCR_NET | SSI_SCR_SSIEN |
+ SSI_SCR_TE | SSI_SCR_RE,
+ base + SSI_SCR);
+
+ writel(SSI_SACNT_DEFAULT, base + SSI_SACNT);
+ writel(0xff, base + SSI_SACCDIS);
+ writel(0x300, base + SSI_SACCEN);
+}
+
+static struct imx_ssi *ac97_ssi;
+
+static void imx_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ struct imx_ssi *imx_ssi = ac97_ssi;
+ void __iomem *base = imx_ssi->base;
+ unsigned int lreg;
+ unsigned int lval;
+
+ if (reg > 0x7f)
+ return;
+
+ pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
+
+ lreg = reg << 12;
+ writel(lreg, base + SSI_SACADD);
+
+ lval = val << 4;
+ writel(lval , base + SSI_SACDAT);
+
+ writel(SSI_SACNT_DEFAULT | SSI_SACNT_WR, base + SSI_SACNT);
+ udelay(100);
+}
+
+static unsigned short imx_ssi_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ struct imx_ssi *imx_ssi = ac97_ssi;
+ void __iomem *base = imx_ssi->base;
+
+ unsigned short val = -1;
+ unsigned int lreg;
+
+ lreg = (reg & 0x7f) << 12 ;
+ writel(lreg, base + SSI_SACADD);
+ writel(SSI_SACNT_DEFAULT | SSI_SACNT_RD, base + SSI_SACNT);
+
+ udelay(100);
+
+ val = (readl(base + SSI_SACDAT) >> 4) & 0xffff;
+
+ pr_debug("%s: 0x%02x 0x%04x\n", __func__, reg, val);
+
+ return val;
+}
+
+static void imx_ssi_ac97_reset(struct snd_ac97 *ac97)
+{
+ struct imx_ssi *imx_ssi = ac97_ssi;
+
+ if (imx_ssi->ac97_reset)
+ imx_ssi->ac97_reset(ac97);
+}
+
+static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct imx_ssi *imx_ssi = ac97_ssi;
+
+ if (imx_ssi->ac97_warm_reset)
+ imx_ssi->ac97_warm_reset(ac97);
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = imx_ssi_ac97_read,
+ .write = imx_ssi_ac97_write,
+ .reset = imx_ssi_ac97_reset,
+ .warm_reset = imx_ssi_ac97_warm_reset
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+struct snd_soc_dai imx_ssi_pcm_dai[2];
+EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
+
+static int imx_ssi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct imx_ssi *ssi;
+ struct imx_ssi_platform_data *pdata = pdev->dev.platform_data;
+ struct snd_soc_platform *platform;
+ int ret = 0;
+ unsigned int val;
+ struct snd_soc_dai *dai = &imx_ssi_pcm_dai[pdev->id];
+
+ if (dai->id >= ARRAY_SIZE(imx_ssi_pcm_dai))
+ return -EINVAL;
+
+ ssi = kzalloc(sizeof(*ssi), GFP_KERNEL);
+ if (!ssi)
+ return -ENOMEM;
+
+ if (pdata) {
+ ssi->ac97_reset = pdata->ac97_reset;
+ ssi->ac97_warm_reset = pdata->ac97_warm_reset;
+ ssi->flags = pdata->flags;
+ }
+
+ ssi->irq = platform_get_irq(pdev, 0);
+
+ ssi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssi->clk)) {
+ ret = PTR_ERR(ssi->clk);
+ dev_err(&pdev->dev, "Cannot get the clock: %d\n",
+ ret);
+ goto failed_clk;
+ }
+ clk_enable(ssi->clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto failed_get_resource;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), DRV_NAME)) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ ret = -EBUSY;
+ goto failed_get_resource;
+ }
+
+ ssi->base = ioremap(res->start, resource_size(res));
+ if (!ssi->base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENODEV;
+ goto failed_ioremap;
+ }
+
+ if (ssi->flags & IMX_SSI_USE_AC97) {
+ if (ac97_ssi) {
+ ret = -EBUSY;
+ goto failed_ac97;
+ }
+ ac97_ssi = ssi;
+ setup_channel_to_ac97(ssi);
+ memcpy(dai, &imx_ac97_dai, sizeof(imx_ac97_dai));
+ } else
+ memcpy(dai, &imx_ssi_dai, sizeof(imx_ssi_dai));
+
+ writel(0x0, ssi->base + SSI_SIER);
+
+ ssi->dma_params_rx.dma_addr = res->start + SSI_SRX0;
+ ssi->dma_params_tx.dma_addr = res->start + SSI_STX0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx0");
+ if (res)
+ ssi->dma_params_tx.dma = res->start;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx0");
+ if (res)
+ ssi->dma_params_rx.dma = res->start;
+
+ dai->id = pdev->id;
+ dai->dev = &pdev->dev;
+ dai->name = kasprintf(GFP_KERNEL, "imx-ssi.%d", pdev->id);
+ dai->private_data = ssi;
+
+ if ((cpu_is_mx27() || cpu_is_mx21()) &&
+ !(ssi->flags & IMX_SSI_USE_AC97)) {
+ ssi->flags |= IMX_SSI_DMA;
+ platform = imx_ssi_dma_mx2_init(pdev, ssi);
+ } else
+ platform = imx_ssi_fiq_init(pdev, ssi);
+
+ imx_soc_platform.pcm_ops = platform->pcm_ops;
+ imx_soc_platform.pcm_new = platform->pcm_new;
+ imx_soc_platform.pcm_free = platform->pcm_free;
+
+ val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
+ SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
+ writel(val, ssi->base + SSI_SFCSR);
+
+ ret = snd_soc_register_dai(dai);
+ if (ret) {
+ dev_err(&pdev->dev, "register DAI failed\n");
+ goto failed_register;
+ }
+
+ platform_set_drvdata(pdev, ssi);
+
+ return 0;
+
+failed_register:
+failed_ac97:
+ iounmap(ssi->base);
+failed_ioremap:
+ release_mem_region(res->start, resource_size(res));
+failed_get_resource:
+ clk_disable(ssi->clk);
+ clk_put(ssi->clk);
+failed_clk:
+ kfree(ssi);
+
+ return ret;
+}
+
+static int __devexit imx_ssi_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct imx_ssi *ssi = platform_get_drvdata(pdev);
+ struct snd_soc_dai *dai = &imx_ssi_pcm_dai[pdev->id];
+
+ snd_soc_unregister_dai(dai);
+
+ if (ssi->flags & IMX_SSI_USE_AC97)
+ ac97_ssi = NULL;
+
+ if (!(ssi->flags & IMX_SSI_DMA))
+ imx_ssi_fiq_exit(pdev, ssi);
+
+ iounmap(ssi->base);
+ release_mem_region(res->start, resource_size(res));
+ clk_disable(ssi->clk);
+ clk_put(ssi->clk);
+ kfree(ssi);
+
+ return 0;
+}
+
+static struct platform_driver imx_ssi_driver = {
+ .probe = imx_ssi_probe,
+ .remove = __devexit_p(imx_ssi_remove),
+
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init imx_ssi_init(void)
+{
+ int ret;
+
+ ret = snd_soc_register_platform(&imx_soc_platform);
+ if (ret) {
+ pr_err("failed to register soc platform: %d\n", ret);
+ return ret;
+ }
+
+ ret = platform_driver_register(&imx_ssi_driver);
+ if (ret) {
+ snd_soc_unregister_platform(&imx_soc_platform);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __exit imx_ssi_exit(void)
+{
+ platform_driver_unregister(&imx_ssi_driver);
+ snd_soc_unregister_platform(&imx_soc_platform);
+}
+
+module_init(imx_ssi_init);
+module_exit(imx_ssi_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sascha Hauer, <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX I2S/ac97 SoC Interface");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
new file mode 100644
index 0000000..55f26eb
--- /dev/null
+++ b/sound/soc/imx/imx-ssi.h
@@ -0,0 +1,237 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IMX_SSI_H
+#define _IMX_SSI_H
+
+#define SSI_STX0 0x00
+#define SSI_STX1 0x04
+#define SSI_SRX0 0x08
+#define SSI_SRX1 0x0c
+
+#define SSI_SCR 0x10
+#define SSI_SCR_CLK_IST (1 << 9)
+#define SSI_SCR_CLK_IST_SHIFT 9
+#define SSI_SCR_TCH_EN (1 << 8)
+#define SSI_SCR_SYS_CLK_EN (1 << 7)
+#define SSI_SCR_I2S_MODE_NORM (0 << 5)
+#define SSI_SCR_I2S_MODE_MSTR (1 << 5)
+#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
+#define SSI_I2S_MODE_MASK (3 << 5)
+#define SSI_SCR_SYN (1 << 4)
+#define SSI_SCR_NET (1 << 3)
+#define SSI_SCR_RE (1 << 2)
+#define SSI_SCR_TE (1 << 1)
+#define SSI_SCR_SSIEN (1 << 0)
+
+#define SSI_SISR 0x14
+#define SSI_SISR_MASK ((1 << 19) - 1)
+#define SSI_SISR_CMDAU (1 << 18)
+#define SSI_SISR_CMDDU (1 << 17)
+#define SSI_SISR_RXT (1 << 16)
+#define SSI_SISR_RDR1 (1 << 15)
+#define SSI_SISR_RDR0 (1 << 14)
+#define SSI_SISR_TDE1 (1 << 13)
+#define SSI_SISR_TDE0 (1 << 12)
+#define SSI_SISR_ROE1 (1 << 11)
+#define SSI_SISR_ROE0 (1 << 10)
+#define SSI_SISR_TUE1 (1 << 9)
+#define SSI_SISR_TUE0 (1 << 8)
+#define SSI_SISR_TFS (1 << 7)
+#define SSI_SISR_RFS (1 << 6)
+#define SSI_SISR_TLS (1 << 5)
+#define SSI_SISR_RLS (1 << 4)
+#define SSI_SISR_RFF1 (1 << 3)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SISR_TFE1 (1 << 1)
+#define SSI_SISR_TFE0 (1 << 0)
+
+#define SSI_SIER 0x18
+#define SSI_SIER_RDMAE (1 << 22)
+#define SSI_SIER_RIE (1 << 21)
+#define SSI_SIER_TDMAE (1 << 20)
+#define SSI_SIER_TIE (1 << 19)
+#define SSI_SIER_CMDAU_EN (1 << 18)
+#define SSI_SIER_CMDDU_EN (1 << 17)
+#define SSI_SIER_RXT_EN (1 << 16)
+#define SSI_SIER_RDR1_EN (1 << 15)
+#define SSI_SIER_RDR0_EN (1 << 14)
+#define SSI_SIER_TDE1_EN (1 << 13)
+#define SSI_SIER_TDE0_EN (1 << 12)
+#define SSI_SIER_ROE1_EN (1 << 11)
+#define SSI_SIER_ROE0_EN (1 << 10)
+#define SSI_SIER_TUE1_EN (1 << 9)
+#define SSI_SIER_TUE0_EN (1 << 8)
+#define SSI_SIER_TFS_EN (1 << 7)
+#define SSI_SIER_RFS_EN (1 << 6)
+#define SSI_SIER_TLS_EN (1 << 5)
+#define SSI_SIER_RLS_EN (1 << 4)
+#define SSI_SIER_RFF1_EN (1 << 3)
+#define SSI_SIER_RFF0_EN (1 << 2)
+#define SSI_SIER_TFE1_EN (1 << 1)
+#define SSI_SIER_TFE0_EN (1 << 0)
+
+#define SSI_STCR 0x1c
+#define SSI_STCR_TXBIT0 (1 << 9)
+#define SSI_STCR_TFEN1 (1 << 8)
+#define SSI_STCR_TFEN0 (1 << 7)
+#define SSI_FIFO_ENABLE_0_SHIFT 7
+#define SSI_STCR_TFDIR (1 << 6)
+#define SSI_STCR_TXDIR (1 << 5)
+#define SSI_STCR_TSHFD (1 << 4)
+#define SSI_STCR_TSCKP (1 << 3)
+#define SSI_STCR_TFSI (1 << 2)
+#define SSI_STCR_TFSL (1 << 1)
+#define SSI_STCR_TEFS (1 << 0)
+
+#define SSI_SRCR 0x20
+#define SSI_SRCR_RXBIT0 (1 << 9)
+#define SSI_SRCR_RFEN1 (1 << 8)
+#define SSI_SRCR_RFEN0 (1 << 7)
+#define SSI_FIFO_ENABLE_0_SHIFT 7
+#define SSI_SRCR_RFDIR (1 << 6)
+#define SSI_SRCR_RXDIR (1 << 5)
+#define SSI_SRCR_RSHFD (1 << 4)
+#define SSI_SRCR_RSCKP (1 << 3)
+#define SSI_SRCR_RFSI (1 << 2)
+#define SSI_SRCR_RFSL (1 << 1)
+#define SSI_SRCR_REFS (1 << 0)
+
+#define SSI_SRCCR 0x28
+#define SSI_SRCCR_DIV2 (1 << 18)
+#define SSI_SRCCR_PSR (1 << 17)
+#define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_SRCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_SRCCR_WL_MASK (0xf << 13)
+#define SSI_SRCCR_DC_MASK (0x1f << 8)
+#define SSI_SRCCR_PM_MASK (0xff << 0)
+
+#define SSI_STCCR 0x24
+#define SSI_STCCR_DIV2 (1 << 18)
+#define SSI_STCCR_PSR (1 << 17)
+#define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_STCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_STCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_STCCR_WL_MASK (0xf << 13)
+#define SSI_STCCR_DC_MASK (0x1f << 8)
+#define SSI_STCCR_PM_MASK (0xff << 0)
+
+#define SSI_SFCSR 0x2c
+#define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28)
+#define SSI_RX_FIFO_1_COUNT_SHIFT 28
+#define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24)
+#define SSI_TX_FIFO_1_COUNT_SHIFT 24
+#define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20)
+#define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16)
+#define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12)
+#define SSI_RX_FIFO_0_COUNT_SHIFT 12
+#define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8)
+#define SSI_TX_FIFO_0_COUNT_SHIFT 8
+#define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4)
+#define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0)
+#define SSI_SFCSR_RFWM0_MASK (0xf << 4)
+#define SSI_SFCSR_TFWM0_MASK (0xf << 0)
+
+#define SSI_STR 0x30
+#define SSI_STR_TEST (1 << 15)
+#define SSI_STR_RCK2TCK (1 << 14)
+#define SSI_STR_RFS2TFS (1 << 13)
+#define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8)
+#define SSI_STR_TXD2RXD (1 << 7)
+#define SSI_STR_TCK2RCK (1 << 6)
+#define SSI_STR_TFS2RFS (1 << 5)
+#define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0)
+
+#define SSI_SOR 0x34
+#define SSI_SOR_CLKOFF (1 << 6)
+#define SSI_SOR_RX_CLR (1 << 5)
+#define SSI_SOR_TX_CLR (1 << 4)
+#define SSI_SOR_INIT (1 << 3)
+#define SSI_SOR_WAIT(x) (((x) & 0x3) << 1)
+#define SSI_SOR_WAIT_MASK (0x3 << 1)
+#define SSI_SOR_SYNRST (1 << 0)
+
+#define SSI_SACNT 0x38
+#define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
+#define SSI_SACNT_WR (1 << 4)
+#define SSI_SACNT_RD (1 << 3)
+#define SSI_SACNT_TIF (1 << 2)
+#define SSI_SACNT_FV (1 << 1)
+#define SSI_SACNT_AC97EN (1 << 0)
+
+#define SSI_SACADD 0x3c
+#define SSI_SACDAT 0x40
+#define SSI_SATAG 0x44
+#define SSI_STMSK 0x48
+#define SSI_SRMSK 0x4c
+#define SSI_SACCST 0x50
+#define SSI_SACCEN 0x54
+#define SSI_SACCDIS 0x58
+
+/* SSI clock sources */
+#define IMX_SSP_SYS_CLK 0
+
+/* SSI audio dividers */
+#define IMX_SSI_TX_DIV_2 0
+#define IMX_SSI_TX_DIV_PSR 1
+#define IMX_SSI_TX_DIV_PM 2
+#define IMX_SSI_RX_DIV_2 3
+#define IMX_SSI_RX_DIV_PSR 4
+#define IMX_SSI_RX_DIV_PM 5
+
+extern struct snd_soc_dai imx_ssi_pcm_dai[2];
+extern struct snd_soc_platform imx_soc_platform;
+
+#define DRV_NAME "imx-ssi"
+
+struct imx_pcm_dma_params {
+ int dma;
+ unsigned long dma_addr;
+ int burstsize;
+};
+
+struct imx_ssi {
+ struct platform_device *ac97_dev;
+
+ struct snd_soc_device imx_ac97;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+ int fiq_enable;
+ unsigned int offset;
+
+ unsigned int flags;
+
+ void (*ac97_reset) (struct snd_ac97 *ac97);
+ void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+
+ struct imx_pcm_dma_params dma_params_rx;
+ struct imx_pcm_dma_params dma_params_tx;
+
+ int enabled;
+};
+
+struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
+ struct imx_ssi *ssi);
+void imx_ssi_fiq_exit(struct platform_device *pdev, struct imx_ssi *ssi);
+struct snd_soc_platform *imx_ssi_dma_mx2_init(struct platform_device *pdev,
+ struct imx_ssi *ssi);
+
+int snd_imx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma);
+int imx_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm);
+void imx_pcm_free(struct snd_pcm *pcm);
+
+/*
+ * Do not change this as the FIQ handler depends on this size
+ */
+#define IMX_SSI_DMABUF_SIZE (64 * 1024)
+
+#define DMA_RXFIFO_BURST 0x4
+#define DMA_TXFIFO_BURST 0x6
+
+#endif /* _IMX_SSI_H */
diff --git a/sound/soc/imx/mx1_mx2-pcm.c b/sound/soc/imx/mx1_mx2-pcm.c
deleted file mode 100644
index bffffcd..0000000
--- a/sound/soc/imx/mx1_mx2-pcm.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * mx1_mx2-pcm.c -- ALSA SoC interface for Freescale i.MX1x, i.MX2x CPUs
- *
- * Copyright 2009 Vista Silicon S.L.
- * Author: Javier Martin
- * javier.martin@vista-silicon.com
- *
- * Based on mxc-pcm.c by Liam Girdwood.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
-
-#include "mx1_mx2-pcm.h"
-
-
-static const struct snd_pcm_hardware mx1_mx2_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID),
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .buffer_bytes_max = 32 * 1024,
- .period_bytes_min = 64,
- .period_bytes_max = 8 * 1024,
- .periods_min = 2,
- .periods_max = 255,
- .fifo_size = 0,
-};
-
-struct mx1_mx2_runtime_data {
- int dma_ch;
- int active;
- unsigned int period;
- unsigned int periods;
- int tx_spin;
- spinlock_t dma_lock;
- struct mx1_mx2_pcm_dma_params *dma_params;
-};
-
-
-/**
- * This function stops the current dma transfer for playback
- * and clears the dma pointers.
- *
- * @param substream pointer to the structure of the current stream.
- *
- */
-static int audio_stop_dma(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
-
- spin_lock_irqsave(&prtd->dma_lock, flags);
-
- pr_debug("%s\n", __func__);
-
- prtd->active = 0;
- prtd->period = 0;
- prtd->periods = 0;
-
- /* this stops the dma channel and clears the buffer ptrs */
-
- imx_dma_disable(prtd->dma_ch);
-
- spin_unlock_irqrestore(&prtd->dma_lock, flags);
-
- return 0;
-}
-
-/**
- * This function is called whenever a new audio block needs to be
- * transferred to the codec. The function receives the address and the size
- * of the new block and start a new DMA transfer.
- *
- * @param substream pointer to the structure of the current stream.
- *
- */
-static int dma_new_period(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
- unsigned int dma_size;
- unsigned int offset;
- int ret = 0;
- dma_addr_t mem_addr;
- unsigned int dev_addr;
-
- if (prtd->active) {
- dma_size = frames_to_bytes(runtime, runtime->period_size);
- offset = dma_size * prtd->period;
-
- pr_debug("%s: period (%d) out of (%d)\n", __func__,
- prtd->period,
- runtime->periods);
- pr_debug("period_size %d frames\n offset %d bytes\n",
- (unsigned int)runtime->period_size,
- offset);
- pr_debug("dma_size %d bytes\n", dma_size);
-
- snd_BUG_ON(dma_size > mx1_mx2_pcm_hardware.period_bytes_max);
-
- mem_addr = (dma_addr_t)(runtime->dma_addr + offset);
- dev_addr = prtd->dma_params->per_address;
- pr_debug("%s: mem_addr is %x\n dev_addr is %x\n",
- __func__, mem_addr, dev_addr);
-
- ret = imx_dma_setup_single(prtd->dma_ch, mem_addr,
- dma_size, dev_addr,
- prtd->dma_params->transfer_type);
- if (ret < 0) {
- printk(KERN_ERR "Error %d configuring DMA\n", ret);
- return ret;
- }
- imx_dma_enable(prtd->dma_ch);
-
- pr_debug("%s: transfer enabled\nmem_addr = %x\n",
- __func__, (unsigned int) mem_addr);
- pr_debug("dev_addr = %x\ndma_size = %d\n",
- (unsigned int) dev_addr, dma_size);
-
- prtd->tx_spin = 1; /* FGA little trick to retrieve DMA pos */
- prtd->period++;
- prtd->period %= runtime->periods;
- }
- return ret;
-}
-
-
-/**
- * This is a callback which will be called
- * when a TX transfer finishes. The call occurs
- * in interrupt context.
- *
- * @param dat pointer to the structure of the current stream.
- *
- */
-static void audio_dma_irq(int channel, void *data)
-{
- struct snd_pcm_substream *substream;
- struct snd_pcm_runtime *runtime;
- struct mx1_mx2_runtime_data *prtd;
- unsigned int dma_size;
- unsigned int previous_period;
- unsigned int offset;
-
- substream = data;
- runtime = substream->runtime;
- prtd = runtime->private_data;
- previous_period = prtd->periods;
- dma_size = frames_to_bytes(runtime, runtime->period_size);
- offset = dma_size * previous_period;
-
- prtd->tx_spin = 0;
- prtd->periods++;
- prtd->periods %= runtime->periods;
-
- pr_debug("%s: irq per %d offset %x\n", __func__, prtd->periods, offset);
-
- /*
- * If we are getting a callback for an active stream then we inform
- * the PCM middle layer we've finished a period
- */
- if (prtd->active)
- snd_pcm_period_elapsed(substream);
-
- /*
- * Trig next DMA transfer
- */
- dma_new_period(substream);
-}
-
-/**
- * This function configures the hardware to allow audio
- * playback operations. It is called by ALSA framework.
- *
- * @param substream pointer to the structure of the current stream.
- *
- * @return 0 on success, -1 otherwise.
- */
-static int
-snd_mx1_mx2_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
-
- prtd->period = 0;
- prtd->periods = 0;
-
- return 0;
-}
-
-static int mx1_mx2_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- int ret;
-
- ret = snd_pcm_lib_malloc_pages(substream,
- params_buffer_bytes(hw_params));
- if (ret < 0) {
- printk(KERN_ERR "%s: Error %d failed to malloc pcm pages \n",
- __func__, ret);
- return ret;
- }
-
- pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_addr 0x(%x)\n",
- __func__, (unsigned int)runtime->dma_addr);
- pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_area 0x(%x)\n",
- __func__, (unsigned int)runtime->dma_area);
- pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_bytes 0x(%x)\n",
- __func__, (unsigned int)runtime->dma_bytes);
-
- return ret;
-}
-
-static int mx1_mx2_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
-
- imx_dma_free(prtd->dma_ch);
-
- snd_pcm_lib_free_pages(substream);
-
- return 0;
-}
-
-static int mx1_mx2_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct mx1_mx2_runtime_data *prtd = substream->runtime->private_data;
- int ret = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->tx_spin = 0;
- /* requested stream startup */
- prtd->active = 1;
- pr_debug("%s: starting dma_new_period\n", __func__);
- ret = dma_new_period(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- /* requested stream shutdown */
- pr_debug("%s: stopping dma transfer\n", __func__);
- ret = audio_stop_dma(substream);
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-static snd_pcm_uframes_t
-mx1_mx2_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
- unsigned int offset = 0;
-
- /* tx_spin value is used here to check if a transfer is active */
- if (prtd->tx_spin) {
- offset = (runtime->period_size * (prtd->periods)) +
- (runtime->period_size >> 1);
- if (offset >= runtime->buffer_size)
- offset = runtime->period_size >> 1;
- } else {
- offset = (runtime->period_size * (prtd->periods));
- if (offset >= runtime->buffer_size)
- offset = 0;
- }
- pr_debug("%s: pointer offset %x\n", __func__, offset);
-
- return offset;
-}
-
-static int mx1_mx2_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct mx1_mx2_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
- int ret;
-
- snd_soc_set_runtime_hwparams(substream, &mx1_mx2_pcm_hardware);
-
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- return ret;
-
- prtd = kzalloc(sizeof(struct mx1_mx2_runtime_data), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
-
- runtime->private_data = prtd;
-
- if (!dma_data)
- return -ENODEV;
-
- prtd->dma_params = dma_data;
-
- pr_debug("%s: Requesting dma channel (%s)\n", __func__,
- prtd->dma_params->name);
- ret = imx_dma_request_by_prio(prtd->dma_params->name, DMA_PRIO_HIGH);
- if (ret < 0) {
- printk(KERN_ERR "Error %d requesting dma channel\n", ret);
- return ret;
- }
- prtd->dma_ch = ret;
- imx_dma_config_burstlen(prtd->dma_ch,
- prtd->dma_params->watermark_level);
-
- ret = imx_dma_config_channel(prtd->dma_ch,
- prtd->dma_params->per_config,
- prtd->dma_params->mem_config,
- prtd->dma_params->event_id, 0);
-
- if (ret) {
- pr_debug(KERN_ERR "Error %d configuring dma channel %d\n",
- ret, prtd->dma_ch);
- return ret;
- }
-
- pr_debug("%s: Setting tx dma callback function\n", __func__);
- ret = imx_dma_setup_handlers(prtd->dma_ch,
- audio_dma_irq, NULL,
- (void *)substream);
- if (ret < 0) {
- printk(KERN_ERR "Error %d setting dma callback function\n", ret);
- return ret;
- }
- return 0;
-
- out:
- return ret;
-}
-
-static int mx1_mx2_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct mx1_mx2_runtime_data *prtd = runtime->private_data;
-
- kfree(prtd);
-
- return 0;
-}
-
-static int mx1_mx2_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops mx1_mx2_pcm_ops = {
- .open = mx1_mx2_pcm_open,
- .close = mx1_mx2_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = mx1_mx2_pcm_hw_params,
- .hw_free = mx1_mx2_pcm_hw_free,
- .prepare = snd_mx1_mx2_prepare,
- .trigger = mx1_mx2_pcm_trigger,
- .pointer = mx1_mx2_pcm_pointer,
- .mmap = mx1_mx2_pcm_mmap,
-};
-
-static u64 mx1_mx2_pcm_dmamask = 0xffffffff;
-
-static int mx1_mx2_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- size_t size = mx1_mx2_pcm_hardware.buffer_bytes_max;
- buf->dev.type = SNDRV_DMA_TYPE_DEV;
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
-
- /* Reserve uncached-buffered memory area for DMA */
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
- &buf->addr, GFP_KERNEL);
-
- pr_debug("%s: preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
- __func__, (void *) buf->area, (void *) buf->addr, size);
-
- if (!buf->area)
- return -ENOMEM;
-
- buf->bytes = size;
- return 0;
-}
-
-static void mx1_mx2_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (!substream)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
-
- dma_free_writecombine(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
-static int mx1_mx2_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
- struct snd_pcm *pcm)
-{
- int ret = 0;
-
- if (!card->dev->dma_mask)
- card->dev->dma_mask = &mx1_mx2_pcm_dmamask;
- if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = 0xffffffff;
-
- if (dai->playback.channels_min) {
- ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_PLAYBACK);
- pr_debug("%s: preallocate playback buffer\n", __func__);
- if (ret)
- goto out;
- }
-
- if (dai->capture.channels_min) {
- ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_CAPTURE);
- pr_debug("%s: preallocate capture buffer\n", __func__);
- if (ret)
- goto out;
- }
- out:
- return ret;
-}
-
-struct snd_soc_platform mx1_mx2_soc_platform = {
- .name = "mx1_mx2-audio",
- .pcm_ops = &mx1_mx2_pcm_ops,
- .pcm_new = mx1_mx2_pcm_new,
- .pcm_free = mx1_mx2_pcm_free_dma_buffers,
-};
-EXPORT_SYMBOL_GPL(mx1_mx2_soc_platform);
-
-static int __init mx1_mx2_soc_platform_init(void)
-{
- return snd_soc_register_platform(&mx1_mx2_soc_platform);
-}
-module_init(mx1_mx2_soc_platform_init);
-
-static void __exit mx1_mx2_soc_platform_exit(void)
-{
- snd_soc_unregister_platform(&mx1_mx2_soc_platform);
-}
-module_exit(mx1_mx2_soc_platform_exit);
-
-MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
-MODULE_DESCRIPTION("Freescale i.MX2x, i.MX1x PCM DMA module");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mx1_mx2-pcm.h b/sound/soc/imx/mx1_mx2-pcm.h
deleted file mode 100644
index 2e52810..0000000
--- a/sound/soc/imx/mx1_mx2-pcm.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * mx1_mx2-pcm.h :- ASoC platform header for Freescale i.MX1x, i.MX2x
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _MX1_MX2_PCM_H
-#define _MX1_MX2_PCM_H
-
-/* DMA information for mx1_mx2 platforms */
-struct mx1_mx2_pcm_dma_params {
- char *name; /* stream identifier */
- unsigned int transfer_type; /* READ or WRITE DMA transfer */
- dma_addr_t per_address; /* physical address of SSI fifo */
- int event_id; /* fixed DMA number for SSI fifo */
- int watermark_level; /* SSI fifo watermark level */
- int per_config; /* DMA Config flags for peripheral */
- int mem_config; /* DMA Config flags for RAM */
- };
-
-/* platform data */
-extern struct snd_soc_platform mx1_mx2_soc_platform;
-
-#endif
diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c
deleted file mode 100644
index 07d2a24..0000000
--- a/sound/soc/imx/mx27vis_wm8974.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * mx27vis_wm8974.c -- SoC audio for mx27vis
- *
- * Copyright 2009 Vista Silicon S.L.
- * Author: Javier Martin
- * javier.martin@vista-silicon.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-
-#include "../codecs/wm8974.h"
-#include "mx1_mx2-pcm.h"
-#include "mxc-ssi.h"
-#include <mach/gpio.h>
-#include <mach/iomux.h>
-
-#define IGNORED_ARG 0
-
-
-static struct snd_soc_card mx27vis;
-
-/**
- * This function connects SSI1 (HPCR1) as slave to
- * SSI1 external signals (PPCR1)
- * As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from
- * port 4
- */
-void audmux_connect_1_4(void)
-{
- pr_debug("AUDMUX: normal operation mode\n");
- /* Reset HPCR1 and PPCR1 */
-
- DAM_HPCR1 = 0x00000000;
- DAM_PPCR1 = 0x00000000;
-
- /* set to synchronous */
- DAM_HPCR1 |= AUDMUX_HPCR_SYN;
- DAM_PPCR1 |= AUDMUX_PPCR_SYN;
-
-
- /* set Rx sources 1 <--> 4 */
- DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */
- DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */
-
- /* set Tx frame and Clock direction and source 4 --> 1 output */
- DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR;
- DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */
-
- return;
-}
-
-static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0;
- int ret = 0;
-
- /*
- * The WM8974 is better at generating accurate audio clocks than the
- * MX27 SSI controller, so we will use it as master when we can.
- */
- switch (params_rate(params)) {
- case 8000:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- mclk = WM8974_MCLKDIV_12;
- pll_out = 24576000;
- break;
- case 16000:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- pll_out = 12288000;
- break;
- case 48000:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_4;
- pll_out = 12288000;
- break;
- case 96000:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_2;
- pll_out = 12288000;
- break;
- case 11025:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_16;
- pll_out = 11289600;
- break;
- case 22050:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_8;
- pll_out = 11289600;
- break;
- case 44100:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_4;
- mclk = WM8974_MCLKDIV_2;
- pll_out = 11289600;
- break;
- case 88200:
- fmt = SND_SOC_DAIFMT_CBM_CFM;
- bclk = WM8974_BCLKDIV_2;
- pll_out = 11289600;
- break;
- }
-
- /* set codec DAI configuration */
- ret = codec_dai->ops->set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
- SND_SOC_DAIFMT_SYNC | fmt);
- if (ret < 0) {
- printk(KERN_ERR "Error from codec DAI configuration\n");
- return ret;
- }
-
- /* set cpu DAI configuration */
- ret = cpu_dai->ops->set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_SYNC | fmt);
- if (ret < 0) {
- printk(KERN_ERR "Error from cpu DAI configuration\n");
- return ret;
- }
-
- /* Put DC field of STCCR to 1 (not zero) */
- ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2);
-
- /* set the SSI system clock as input */
- ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
- SND_SOC_CLOCK_IN);
- if (ret < 0) {
- printk(KERN_ERR "Error when setting system SSI clk\n");
- return ret;
- }
-
- /* set codec BCLK division for sample rate */
- ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk);
- if (ret < 0) {
- printk(KERN_ERR "Error when setting BCLK division\n");
- return ret;
- }
-
-
- /* codec PLL input is 25 MHz */
- ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG,
- 25000000, pll_out);
- if (ret < 0) {
- printk(KERN_ERR "Error when setting PLL input\n");
- return ret;
- }
-
- /*set codec MCLK division for sample rate */
- ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk);
- if (ret < 0) {
- printk(KERN_ERR "Error when setting MCLK division\n");
- return ret;
- }
-
- return 0;
-}
-
-static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-
- /* disable the PLL */
- return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG,
- 0, 0);
-}
-
-/*
- * mx27vis WM8974 HiFi DAI opserations.
- */
-static struct snd_soc_ops mx27vis_hifi_ops = {
- .hw_params = mx27vis_hifi_hw_params,
- .hw_free = mx27vis_hifi_hw_free,
-};
-
-
-static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state)
-{
- return 0;
-}
-
-static int mx27vis_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int mx27vis_probe(struct platform_device *pdev)
-{
- int ret = 0;
-
- ret = get_ssi_clk(0, &pdev->dev);
-
- if (ret < 0) {
- printk(KERN_ERR "%s: cant get ssi clock\n", __func__);
- return ret;
- }
-
-
- return 0;
-}
-
-static int mx27vis_remove(struct platform_device *pdev)
-{
- put_ssi_clk(0);
- return 0;
-}
-
-static struct snd_soc_dai_link mx27vis_dai[] = {
-{ /* Hifi Playback*/
- .name = "WM8974",
- .stream_name = "WM8974 HiFi",
- .cpu_dai = &imx_ssi_pcm_dai[0],
- .codec_dai = &wm8974_dai,
- .ops = &mx27vis_hifi_ops,
-},
-};
-
-static struct snd_soc_card mx27vis = {
- .name = "mx27vis",
- .platform = &mx1_mx2_soc_platform,
- .probe = mx27vis_probe,
- .remove = mx27vis_remove,
- .suspend_pre = mx27vis_suspend,
- .resume_post = mx27vis_resume,
- .dai_link = mx27vis_dai,
- .num_links = ARRAY_SIZE(mx27vis_dai),
-};
-
-static struct snd_soc_device mx27vis_snd_devdata = {
- .card = &mx27vis,
- .codec_dev = &soc_codec_dev_wm8974,
-};
-
-static struct platform_device *mx27vis_snd_device;
-
-/* Temporal definition of board specific behaviour */
-void gpio_ssi_active(int ssi_num)
-{
- int ret = 0;
-
- unsigned int ssi1_pins[] = {
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- };
- unsigned int ssi2_pins[] = {
- PC24_PF_SSI2_FS,
- PC25_PF_SSI2_RXD,
- PC26_PF_SSI2_TXD,
- PC27_PF_SSI2_CLK,
- };
- if (ssi_num == 0)
- ret = mxc_gpio_setup_multiple_pins(ssi1_pins,
- ARRAY_SIZE(ssi1_pins), "USB OTG");
- else
- ret = mxc_gpio_setup_multiple_pins(ssi2_pins,
- ARRAY_SIZE(ssi2_pins), "USB OTG");
- if (ret)
- printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num);
-}
-
-
-static int __init mx27vis_init(void)
-{
- int ret;
-
- mx27vis_snd_device = platform_device_alloc("soc-audio", -1);
- if (!mx27vis_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata);
- mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev;
- ret = platform_device_add(mx27vis_snd_device);
-
- if (ret) {
- printk(KERN_ERR "ASoC: Platform device allocation failed\n");
- platform_device_put(mx27vis_snd_device);
- }
-
- /* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */
- gpio_ssi_active(0);
- audmux_connect_1_4();
-
- return ret;
-}
-
-static void __exit mx27vis_exit(void)
-{
- /* We should call some "ssi_gpio_inactive()" properly */
-}
-
-module_init(mx27vis_init);
-module_exit(mx27vis_exit);
-
-
-MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
-MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mxc-ssi.c b/sound/soc/imx/mxc-ssi.c
deleted file mode 100644
index ccdefe6..0000000
--- a/sound/soc/imx/mxc-ssi.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * mxc-ssi.c -- SSI driver for Freescale IMX
- *
- * Copyright 2006 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Based on mxc-alsa-mc13783 (C) 2006 Freescale.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * TODO:
- * Need to rework SSI register defs when new defs go into mainline.
- * Add support for TDM and FIFO 1.
- * Add support for i.mx3x DMA interface.
- *
- */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <mach/dma-mx1-mx2.h>
-#include <asm/mach-types.h>
-
-#include "mxc-ssi.h"
-#include "mx1_mx2-pcm.h"
-
-#define SSI1_PORT 0
-#define SSI2_PORT 1
-
-static int ssi_active[2] = {0, 0};
-
-/* DMA information for mx1_mx2 platforms */
-static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out0 = {
- .name = "SSI1 PCM Stereo out 0",
- .transfer_type = DMA_MODE_WRITE,
- .per_address = SSI1_BASE_ADDR + STX0,
- .event_id = DMA_REQ_SSI1_TX0,
- .watermark_level = TXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out1 = {
- .name = "SSI1 PCM Stereo out 1",
- .transfer_type = DMA_MODE_WRITE,
- .per_address = SSI1_BASE_ADDR + STX1,
- .event_id = DMA_REQ_SSI1_TX1,
- .watermark_level = TXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in0 = {
- .name = "SSI1 PCM Stereo in 0",
- .transfer_type = DMA_MODE_READ,
- .per_address = SSI1_BASE_ADDR + SRX0,
- .event_id = DMA_REQ_SSI1_RX0,
- .watermark_level = RXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in1 = {
- .name = "SSI1 PCM Stereo in 1",
- .transfer_type = DMA_MODE_READ,
- .per_address = SSI1_BASE_ADDR + SRX1,
- .event_id = DMA_REQ_SSI1_RX1,
- .watermark_level = RXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out0 = {
- .name = "SSI2 PCM Stereo out 0",
- .transfer_type = DMA_MODE_WRITE,
- .per_address = SSI2_BASE_ADDR + STX0,
- .event_id = DMA_REQ_SSI2_TX0,
- .watermark_level = TXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out1 = {
- .name = "SSI2 PCM Stereo out 1",
- .transfer_type = DMA_MODE_WRITE,
- .per_address = SSI2_BASE_ADDR + STX1,
- .event_id = DMA_REQ_SSI2_TX1,
- .watermark_level = TXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in0 = {
- .name = "SSI2 PCM Stereo in 0",
- .transfer_type = DMA_MODE_READ,
- .per_address = SSI2_BASE_ADDR + SRX0,
- .event_id = DMA_REQ_SSI2_RX0,
- .watermark_level = RXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in1 = {
- .name = "SSI2 PCM Stereo in 1",
- .transfer_type = DMA_MODE_READ,
- .per_address = SSI2_BASE_ADDR + SRX1,
- .event_id = DMA_REQ_SSI2_RX1,
- .watermark_level = RXFIFO_WATERMARK,
- .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
- .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-};
-
-static struct clk *ssi_clk0, *ssi_clk1;
-
-int get_ssi_clk(int ssi, struct device *dev)
-{
- switch (ssi) {
- case 0:
- ssi_clk0 = clk_get(dev, "ssi1");
- if (IS_ERR(ssi_clk0))
- return PTR_ERR(ssi_clk0);
- return 0;
- case 1:
- ssi_clk1 = clk_get(dev, "ssi2");
- if (IS_ERR(ssi_clk1))
- return PTR_ERR(ssi_clk1);
- return 0;
- default:
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL(get_ssi_clk);
-
-void put_ssi_clk(int ssi)
-{
- switch (ssi) {
- case 0:
- clk_put(ssi_clk0);
- ssi_clk0 = NULL;
- break;
- case 1:
- clk_put(ssi_clk1);
- ssi_clk1 = NULL;
- break;
- }
-}
-EXPORT_SYMBOL(put_ssi_clk);
-
-/*
- * SSI system clock configuration.
- * Should only be called when port is inactive (i.e. SSIEN = 0).
- */
-static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- u32 scr;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- scr = SSI1_SCR;
- pr_debug("%s: SCR for SSI1 is %x\n", __func__, scr);
- } else {
- scr = SSI2_SCR;
- pr_debug("%s: SCR for SSI2 is %x\n", __func__, scr);
- }
-
- if (scr & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
-
- switch (clk_id) {
- case IMX_SSP_SYS_CLK:
- if (dir == SND_SOC_CLOCK_OUT) {
- scr |= SSI_SCR_SYS_CLK_EN;
- pr_debug("%s: clk of is output\n", __func__);
- } else {
- scr &= ~SSI_SCR_SYS_CLK_EN;
- pr_debug("%s: clk of is input\n", __func__);
- }
- break;
- default:
- return -EINVAL;
- }
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- pr_debug("%s: writeback of SSI1_SCR\n", __func__);
- SSI1_SCR = scr;
- } else {
- pr_debug("%s: writeback of SSI2_SCR\n", __func__);
- SSI2_SCR = scr;
- }
-
- return 0;
-}
-
-/*
- * SSI Clock dividers
- * Should only be called when port is inactive (i.e. SSIEN = 0).
- */
-static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- u32 stccr, srccr;
-
- pr_debug("%s\n", __func__);
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- if (SSI1_SCR & SSI_SCR_SSIEN)
- return 0;
- srccr = SSI1_STCCR;
- stccr = SSI1_STCCR;
- } else {
- if (SSI2_SCR & SSI_SCR_SSIEN)
- return 0;
- srccr = SSI2_STCCR;
- stccr = SSI2_STCCR;
- }
-
- switch (div_id) {
- case IMX_SSI_TX_DIV_2:
- stccr &= ~SSI_STCCR_DIV2;
- stccr |= div;
- break;
- case IMX_SSI_TX_DIV_PSR:
- stccr &= ~SSI_STCCR_PSR;
- stccr |= div;
- break;
- case IMX_SSI_TX_DIV_PM:
- stccr &= ~0xff;
- stccr |= SSI_STCCR_PM(div);
- break;
- case IMX_SSI_RX_DIV_2:
- stccr &= ~SSI_STCCR_DIV2;
- stccr |= div;
- break;
- case IMX_SSI_RX_DIV_PSR:
- stccr &= ~SSI_STCCR_PSR;
- stccr |= div;
- break;
- case IMX_SSI_RX_DIV_PM:
- stccr &= ~0xff;
- stccr |= SSI_STCCR_PM(div);
- break;
- default:
- return -EINVAL;
- }
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- SSI1_STCCR = stccr;
- SSI1_SRCCR = srccr;
- } else {
- SSI2_STCCR = stccr;
- SSI2_SRCCR = srccr;
- }
- return 0;
-}
-
-/*
- * SSI Network Mode or TDM slots configuration.
- * Should only be called when port is inactive (i.e. SSIEN = 0).
- */
-static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
- unsigned int mask, int slots)
-{
- u32 stmsk, srmsk, stccr;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- if (SSI1_SCR & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
- stccr = SSI1_STCCR;
- } else {
- if (SSI2_SCR & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
- stccr = SSI2_STCCR;
- }
-
- stmsk = srmsk = mask;
- stccr &= ~SSI_STCCR_DC_MASK;
- stccr |= SSI_STCCR_DC(slots - 1);
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- SSI1_STMSK = stmsk;
- SSI1_SRMSK = srmsk;
- SSI1_SRCCR = SSI1_STCCR = stccr;
- } else {
- SSI2_STMSK = stmsk;
- SSI2_SRMSK = srmsk;
- SSI2_SRCCR = SSI2_STCCR = stccr;
- }
-
- return 0;
-}
-
-/*
- * SSI DAI format configuration.
- * Should only be called when port is inactive (i.e. SSIEN = 0).
- * Note: We don't use the I2S modes but instead manually configure the
- * SSI for I2S.
- */
-static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- u32 stcr = 0, srcr = 0, scr;
-
- /*
- * This is done to avoid this function to modify
- * previous set values in stcr
- */
- stcr = SSI1_STCR;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
- scr = SSI1_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
- else
- scr = SSI2_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
-
- if (scr & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
-
- /* DAI mode */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- /* data on rising edge of bclk, frame low 1clk before data */
- stcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
- srcr |= SSI_SRCR_RFSI | SSI_SRCR_REFS | SSI_SRCR_RXBIT0;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- /* data on rising edge of bclk, frame high with data */
- stcr |= SSI_STCR_TXBIT0;
- srcr |= SSI_SRCR_RXBIT0;
- break;
- case SND_SOC_DAIFMT_DSP_B:
- /* data on rising edge of bclk, frame high with data */
- stcr |= SSI_STCR_TFSL;
- srcr |= SSI_SRCR_RFSL;
- break;
- case SND_SOC_DAIFMT_DSP_A:
- /* data on rising edge of bclk, frame high 1clk before data */
- stcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
- srcr |= SSI_SRCR_RFSL | SSI_SRCR_REFS;
- break;
- }
-
- /* DAI clock inversion */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_IB_IF:
- stcr |= SSI_STCR_TFSI;
- stcr &= ~SSI_STCR_TSCKP;
- srcr |= SSI_SRCR_RFSI;
- srcr &= ~SSI_SRCR_RSCKP;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- stcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
- srcr &= ~(SSI_SRCR_RSCKP | SSI_SRCR_RFSI);
- break;
- case SND_SOC_DAIFMT_NB_IF:
- stcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
- srcr |= SSI_SRCR_RFSI | SSI_SRCR_RSCKP;
- break;
- case SND_SOC_DAIFMT_NB_NF:
- stcr &= ~SSI_STCR_TFSI;
- stcr |= SSI_STCR_TSCKP;
- srcr &= ~SSI_SRCR_RFSI;
- srcr |= SSI_SRCR_RSCKP;
- break;
- }
-
- /* DAI clock master masks */
- switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBS_CFS:
- stcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
- srcr |= SSI_SRCR_RFDIR | SSI_SRCR_RXDIR;
- break;
- case SND_SOC_DAIFMT_CBM_CFS:
- stcr |= SSI_STCR_TFDIR;
- srcr |= SSI_SRCR_RFDIR;
- break;
- case SND_SOC_DAIFMT_CBS_CFM:
- stcr |= SSI_STCR_TXDIR;
- srcr |= SSI_SRCR_RXDIR;
- break;
- }
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- SSI1_STCR = stcr;
- SSI1_SRCR = srcr;
- SSI1_SCR = scr;
- } else {
- SSI2_STCR = stcr;
- SSI2_SRCR = srcr;
- SSI2_SCR = scr;
- }
-
- return 0;
-}
-
-static int imx_ssi_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* set up TX DMA params */
- switch (cpu_dai->id) {
- case IMX_DAI_SSI0:
- cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out0;
- break;
- case IMX_DAI_SSI1:
- cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out1;
- break;
- case IMX_DAI_SSI2:
- cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out0;
- break;
- case IMX_DAI_SSI3:
- cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out1;
- }
- pr_debug("%s: (playback)\n", __func__);
- } else {
- /* set up RX DMA params */
- switch (cpu_dai->id) {
- case IMX_DAI_SSI0:
- cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in0;
- break;
- case IMX_DAI_SSI1:
- cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in1;
- break;
- case IMX_DAI_SSI2:
- cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in0;
- break;
- case IMX_DAI_SSI3:
- cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in1;
- }
- pr_debug("%s: (capture)\n", __func__);
- }
-
- /*
- * we cant really change any SSI values after SSI is enabled
- * need to fix in software for max flexibility - lrg
- */
- if (cpu_dai->active) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
-
- /* reset the SSI port - Sect 45.4.4 */
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
-
- if (!ssi_clk0)
- return -EINVAL;
-
- if (ssi_active[SSI1_PORT]++) {
- pr_debug("%s: exit before reset\n", __func__);
- return 0;
- }
-
- /* SSI1 Reset */
- SSI1_SCR = 0;
-
- SSI1_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
- SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
- SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
- SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
- } else {
-
- if (!ssi_clk1)
- return -EINVAL;
-
- if (ssi_active[SSI2_PORT]++) {
- pr_debug("%s: exit before reset\n", __func__);
- return 0;
- }
-
- /* SSI2 Reset */
- SSI2_SCR = 0;
-
- SSI2_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
- SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
- SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
- SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
- }
-
- return 0;
-}
-
-int imx_ssi_hw_tx_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- u32 stccr, stcr, sier;
-
- pr_debug("%s\n", __func__);
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- stccr = SSI1_STCCR & ~SSI_STCCR_WL_MASK;
- stcr = SSI1_STCR;
- sier = SSI1_SIER;
- } else {
- stccr = SSI2_STCCR & ~SSI_STCCR_WL_MASK;
- stcr = SSI2_STCR;
- sier = SSI2_SIER;
- }
-
- /* DAI data (word) size */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- stccr |= SSI_STCCR_WL(16);
- break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- stccr |= SSI_STCCR_WL(20);
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- stccr |= SSI_STCCR_WL(24);
- break;
- }
-
- /* enable interrupts */
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
- stcr |= SSI_STCR_TFEN0;
- else
- stcr |= SSI_STCR_TFEN1;
- sier |= SSI_SIER_TDMAE;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- SSI1_STCR = stcr;
- SSI1_STCCR = stccr;
- SSI1_SIER = sier;
- } else {
- SSI2_STCR = stcr;
- SSI2_STCCR = stccr;
- SSI2_SIER = sier;
- }
-
- return 0;
-}
-
-int imx_ssi_hw_rx_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- u32 srccr, srcr, sier;
-
- pr_debug("%s\n", __func__);
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- srccr = SSI1_SRCCR & ~SSI_SRCCR_WL_MASK;
- srcr = SSI1_SRCR;
- sier = SSI1_SIER;
- } else {
- srccr = SSI2_SRCCR & ~SSI_SRCCR_WL_MASK;
- srcr = SSI2_SRCR;
- sier = SSI2_SIER;
- }
-
- /* DAI data (word) size */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- srccr |= SSI_SRCCR_WL(16);
- break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- srccr |= SSI_SRCCR_WL(20);
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- srccr |= SSI_SRCCR_WL(24);
- break;
- }
-
- /* enable interrupts */
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
- srcr |= SSI_SRCR_RFEN0;
- else
- srcr |= SSI_SRCR_RFEN1;
- sier |= SSI_SIER_RDMAE;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- SSI1_SRCR = srcr;
- SSI1_SRCCR = srccr;
- SSI1_SIER = sier;
- } else {
- SSI2_SRCR = srcr;
- SSI2_SRCCR = srccr;
- SSI2_SIER = sier;
- }
-
- return 0;
-}
-
-/*
- * Should only be called when port is inactive (i.e. SSIEN = 0),
- * although can be called multiple times by upper layers.
- */
-int imx_ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
- int ret;
-
- /* cant change any parameters when SSI is running */
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- if (SSI1_SCR & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
- } else {
- if (SSI2_SCR & SSI_SCR_SSIEN) {
- printk(KERN_WARNING "Warning ssi already enabled\n");
- return 0;
- }
- }
-
- /*
- * Configure both tx and rx params with the same settings. This is
- * really a harware restriction because SSI must be disabled until
- * we can change those values. If there is an active audio stream in
- * one direction, enabling the other direction with different
- * settings would mean disturbing the running one.
- */
- ret = imx_ssi_hw_tx_params(substream, params);
- if (ret < 0)
- return ret;
- return imx_ssi_hw_rx_params(substream, params);
-}
-
-int imx_ssi_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- int ret;
-
- pr_debug("%s\n", __func__);
-
- /* Enable clks here to follow SSI recommended init sequence */
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
- ret = clk_enable(ssi_clk0);
- if (ret < 0)
- printk(KERN_ERR "Unable to enable ssi_clk0\n");
- } else {
- ret = clk_enable(ssi_clk1);
- if (ret < 0)
- printk(KERN_ERR "Unable to enable ssi_clk1\n");
- }
-
- return 0;
-}
-
-static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- u32 scr;
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
- scr = SSI1_SCR;
- else
- scr = SSI2_SCR;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- scr |= SSI_SCR_TE | SSI_SCR_SSIEN;
- else
- scr |= SSI_SCR_RE | SSI_SCR_SSIEN;
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- scr &= ~SSI_SCR_TE;
- else
- scr &= ~SSI_SCR_RE;
- break;
- default:
- return -EINVAL;
- }
-
- if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
- SSI1_SCR = scr;
- else
- SSI2_SCR = scr;
-
- return 0;
-}
-
-static void imx_ssi_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
- /* shutdown SSI if neither Tx or Rx is active */
- if (!cpu_dai->active) {
-
- if (cpu_dai->id == IMX_DAI_SSI0 ||
- cpu_dai->id == IMX_DAI_SSI2) {
-
- if (--ssi_active[SSI1_PORT] > 1)
- return;
-
- SSI1_SCR = 0;
- clk_disable(ssi_clk0);
- } else {
- if (--ssi_active[SSI2_PORT])
- return;
- SSI2_SCR = 0;
- clk_disable(ssi_clk1);
- }
- }
-}
-
-#ifdef CONFIG_PM
-static int imx_ssi_suspend(struct platform_device *dev,
- struct snd_soc_dai *dai)
-{
- return 0;
-}
-
-static int imx_ssi_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- return 0;
-}
-
-#else
-#define imx_ssi_suspend NULL
-#define imx_ssi_resume NULL
-#endif
-
-#define IMX_SSI_RATES \
- (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \
- SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
- SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
- SNDRV_PCM_RATE_96000)
-
-#define IMX_SSI_BITS \
- (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
- SNDRV_PCM_FMTBIT_S24_LE)
-
-static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
- .startup = imx_ssi_startup,
- .shutdown = imx_ssi_shutdown,
- .trigger = imx_ssi_trigger,
- .prepare = imx_ssi_prepare,
- .hw_params = imx_ssi_hw_params,
- .set_sysclk = imx_ssi_set_dai_sysclk,
- .set_clkdiv = imx_ssi_set_dai_clkdiv,
- .set_fmt = imx_ssi_set_dai_fmt,
- .set_tdm_slot = imx_ssi_set_dai_tdm_slot,
-};
-
-struct snd_soc_dai imx_ssi_pcm_dai[] = {
-{
- .name = "imx-i2s-1-0",
- .id = IMX_DAI_SSI0,
- .suspend = imx_ssi_suspend,
- .resume = imx_ssi_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .ops = &imx_ssi_pcm_dai_ops,
-},
-{
- .name = "imx-i2s-2-0",
- .id = IMX_DAI_SSI1,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .ops = &imx_ssi_pcm_dai_ops,
-},
-{
- .name = "imx-i2s-1-1",
- .id = IMX_DAI_SSI2,
- .suspend = imx_ssi_suspend,
- .resume = imx_ssi_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .ops = &imx_ssi_pcm_dai_ops,
-},
-{
- .name = "imx-i2s-2-1",
- .id = IMX_DAI_SSI3,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .formats = IMX_SSI_BITS,
- .rates = IMX_SSI_RATES,},
- .ops = &imx_ssi_pcm_dai_ops,
-},
-};
-EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
-
-static int __init imx_ssi_init(void)
-{
- return snd_soc_register_dais(imx_ssi_pcm_dai,
- ARRAY_SIZE(imx_ssi_pcm_dai));
-}
-
-static void __exit imx_ssi_exit(void)
-{
- snd_soc_unregister_dais(imx_ssi_pcm_dai,
- ARRAY_SIZE(imx_ssi_pcm_dai));
-}
-
-module_init(imx_ssi_init);
-module_exit(imx_ssi_exit);
-MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com");
-MODULE_DESCRIPTION("i.MX ASoC I2S driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mxc-ssi.h b/sound/soc/imx/mxc-ssi.h
deleted file mode 100644
index 12bbdc9..0000000
--- a/sound/soc/imx/mxc-ssi.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IMX_SSI_H
-#define _IMX_SSI_H
-
-#include <mach/hardware.h>
-
-/* SSI regs definition - MOVE to /arch/arm/plat-mxc/include/mach/ when stable */
-#define SSI1_IO_BASE_ADDR IO_ADDRESS(SSI1_BASE_ADDR)
-#define SSI2_IO_BASE_ADDR IO_ADDRESS(SSI2_BASE_ADDR)
-
-#define STX0 0x00
-#define STX1 0x04
-#define SRX0 0x08
-#define SRX1 0x0c
-#define SCR 0x10
-#define SISR 0x14
-#define SIER 0x18
-#define STCR 0x1c
-#define SRCR 0x20
-#define STCCR 0x24
-#define SRCCR 0x28
-#define SFCSR 0x2c
-#define STR 0x30
-#define SOR 0x34
-#define SACNT 0x38
-#define SACADD 0x3c
-#define SACDAT 0x40
-#define SATAG 0x44
-#define STMSK 0x48
-#define SRMSK 0x4c
-
-#define SSI1_STX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX0)))
-#define SSI1_STX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX1)))
-#define SSI1_SRX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX0)))
-#define SSI1_SRX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX1)))
-#define SSI1_SCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SCR)))
-#define SSI1_SISR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SISR)))
-#define SSI1_SIER (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SIER)))
-#define SSI1_STCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCR)))
-#define SSI1_SRCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCR)))
-#define SSI1_STCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCCR)))
-#define SSI1_SRCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCCR)))
-#define SSI1_SFCSR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SFCSR)))
-#define SSI1_STR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STR)))
-#define SSI1_SOR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SOR)))
-#define SSI1_SACNT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACNT)))
-#define SSI1_SACADD (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACADD)))
-#define SSI1_SACDAT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACDAT)))
-#define SSI1_SATAG (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SATAG)))
-#define SSI1_STMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STMSK)))
-#define SSI1_SRMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRMSK)))
-
-
-#define SSI2_STX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX0)))
-#define SSI2_STX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX1)))
-#define SSI2_SRX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX0)))
-#define SSI2_SRX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX1)))
-#define SSI2_SCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SCR)))
-#define SSI2_SISR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SISR)))
-#define SSI2_SIER (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SIER)))
-#define SSI2_STCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCR)))
-#define SSI2_SRCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCR)))
-#define SSI2_STCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCCR)))
-#define SSI2_SRCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCCR)))
-#define SSI2_SFCSR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SFCSR)))
-#define SSI2_STR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STR)))
-#define SSI2_SOR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SOR)))
-#define SSI2_SACNT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACNT)))
-#define SSI2_SACADD (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACADD)))
-#define SSI2_SACDAT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACDAT)))
-#define SSI2_SATAG (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SATAG)))
-#define SSI2_STMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STMSK)))
-#define SSI2_SRMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRMSK)))
-
-#define SSI_SCR_CLK_IST (1 << 9)
-#define SSI_SCR_TCH_EN (1 << 8)
-#define SSI_SCR_SYS_CLK_EN (1 << 7)
-#define SSI_SCR_I2S_MODE_NORM (0 << 5)
-#define SSI_SCR_I2S_MODE_MSTR (1 << 5)
-#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
-#define SSI_SCR_SYN (1 << 4)
-#define SSI_SCR_NET (1 << 3)
-#define SSI_SCR_RE (1 << 2)
-#define SSI_SCR_TE (1 << 1)
-#define SSI_SCR_SSIEN (1 << 0)
-
-#define SSI_SISR_CMDAU (1 << 18)
-#define SSI_SISR_CMDDU (1 << 17)
-#define SSI_SISR_RXT (1 << 16)
-#define SSI_SISR_RDR1 (1 << 15)
-#define SSI_SISR_RDR0 (1 << 14)
-#define SSI_SISR_TDE1 (1 << 13)
-#define SSI_SISR_TDE0 (1 << 12)
-#define SSI_SISR_ROE1 (1 << 11)
-#define SSI_SISR_ROE0 (1 << 10)
-#define SSI_SISR_TUE1 (1 << 9)
-#define SSI_SISR_TUE0 (1 << 8)
-#define SSI_SISR_TFS (1 << 7)
-#define SSI_SISR_RFS (1 << 6)
-#define SSI_SISR_TLS (1 << 5)
-#define SSI_SISR_RLS (1 << 4)
-#define SSI_SISR_RFF1 (1 << 3)
-#define SSI_SISR_RFF0 (1 << 2)
-#define SSI_SISR_TFE1 (1 << 1)
-#define SSI_SISR_TFE0 (1 << 0)
-
-#define SSI_SIER_RDMAE (1 << 22)
-#define SSI_SIER_RIE (1 << 21)
-#define SSI_SIER_TDMAE (1 << 20)
-#define SSI_SIER_TIE (1 << 19)
-#define SSI_SIER_CMDAU_EN (1 << 18)
-#define SSI_SIER_CMDDU_EN (1 << 17)
-#define SSI_SIER_RXT_EN (1 << 16)
-#define SSI_SIER_RDR1_EN (1 << 15)
-#define SSI_SIER_RDR0_EN (1 << 14)
-#define SSI_SIER_TDE1_EN (1 << 13)
-#define SSI_SIER_TDE0_EN (1 << 12)
-#define SSI_SIER_ROE1_EN (1 << 11)
-#define SSI_SIER_ROE0_EN (1 << 10)
-#define SSI_SIER_TUE1_EN (1 << 9)
-#define SSI_SIER_TUE0_EN (1 << 8)
-#define SSI_SIER_TFS_EN (1 << 7)
-#define SSI_SIER_RFS_EN (1 << 6)
-#define SSI_SIER_TLS_EN (1 << 5)
-#define SSI_SIER_RLS_EN (1 << 4)
-#define SSI_SIER_RFF1_EN (1 << 3)
-#define SSI_SIER_RFF0_EN (1 << 2)
-#define SSI_SIER_TFE1_EN (1 << 1)
-#define SSI_SIER_TFE0_EN (1 << 0)
-
-#define SSI_STCR_TXBIT0 (1 << 9)
-#define SSI_STCR_TFEN1 (1 << 8)
-#define SSI_STCR_TFEN0 (1 << 7)
-#define SSI_STCR_TFDIR (1 << 6)
-#define SSI_STCR_TXDIR (1 << 5)
-#define SSI_STCR_TSHFD (1 << 4)
-#define SSI_STCR_TSCKP (1 << 3)
-#define SSI_STCR_TFSI (1 << 2)
-#define SSI_STCR_TFSL (1 << 1)
-#define SSI_STCR_TEFS (1 << 0)
-
-#define SSI_SRCR_RXBIT0 (1 << 9)
-#define SSI_SRCR_RFEN1 (1 << 8)
-#define SSI_SRCR_RFEN0 (1 << 7)
-#define SSI_SRCR_RFDIR (1 << 6)
-#define SSI_SRCR_RXDIR (1 << 5)
-#define SSI_SRCR_RSHFD (1 << 4)
-#define SSI_SRCR_RSCKP (1 << 3)
-#define SSI_SRCR_RFSI (1 << 2)
-#define SSI_SRCR_RFSL (1 << 1)
-#define SSI_SRCR_REFS (1 << 0)
-
-#define SSI_STCCR_DIV2 (1 << 18)
-#define SSI_STCCR_PSR (1 << 15)
-#define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13)
-#define SSI_STCCR_DC(x) (((x) & 0x1f) << 8)
-#define SSI_STCCR_PM(x) (((x) & 0xff) << 0)
-#define SSI_STCCR_WL_MASK (0xf << 13)
-#define SSI_STCCR_DC_MASK (0x1f << 8)
-#define SSI_STCCR_PM_MASK (0xff << 0)
-
-#define SSI_SRCCR_DIV2 (1 << 18)
-#define SSI_SRCCR_PSR (1 << 15)
-#define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13)
-#define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8)
-#define SSI_SRCCR_PM(x) (((x) & 0xff) << 0)
-#define SSI_SRCCR_WL_MASK (0xf << 13)
-#define SSI_SRCCR_DC_MASK (0x1f << 8)
-#define SSI_SRCCR_PM_MASK (0xff << 0)
-
-
-#define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28)
-#define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24)
-#define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20)
-#define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16)
-#define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12)
-#define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8)
-#define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4)
-#define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0)
-
-#define SSI_STR_TEST (1 << 15)
-#define SSI_STR_RCK2TCK (1 << 14)
-#define SSI_STR_RFS2TFS (1 << 13)
-#define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8)
-#define SSI_STR_TXD2RXD (1 << 7)
-#define SSI_STR_TCK2RCK (1 << 6)
-#define SSI_STR_TFS2RFS (1 << 5)
-#define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0)
-
-#define SSI_SOR_CLKOFF (1 << 6)
-#define SSI_SOR_RX_CLR (1 << 5)
-#define SSI_SOR_TX_CLR (1 << 4)
-#define SSI_SOR_INIT (1 << 3)
-#define SSI_SOR_WAIT(x) (((x) & 0x3) << 1)
-#define SSI_SOR_SYNRST (1 << 0)
-
-#define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
-#define SSI_SACNT_WR (x << 4)
-#define SSI_SACNT_RD (x << 3)
-#define SSI_SACNT_TIF (x << 2)
-#define SSI_SACNT_FV (x << 1)
-#define SSI_SACNT_AC97EN (x << 0)
-
-/* Watermarks for FIFO's */
-#define TXFIFO_WATERMARK 0x4
-#define RXFIFO_WATERMARK 0x4
-
-/* i.MX DAI SSP ID's */
-#define IMX_DAI_SSI0 0 /* SSI1 FIFO 0 */
-#define IMX_DAI_SSI1 1 /* SSI1 FIFO 1 */
-#define IMX_DAI_SSI2 2 /* SSI2 FIFO 0 */
-#define IMX_DAI_SSI3 3 /* SSI2 FIFO 1 */
-
-/* SSI clock sources */
-#define IMX_SSP_SYS_CLK 0
-
-/* SSI audio dividers */
-#define IMX_SSI_TX_DIV_2 0
-#define IMX_SSI_TX_DIV_PSR 1
-#define IMX_SSI_TX_DIV_PM 2
-#define IMX_SSI_RX_DIV_2 3
-#define IMX_SSI_RX_DIV_PSR 4
-#define IMX_SSI_RX_DIV_PM 5
-
-
-/* SSI Div 2 */
-#define IMX_SSI_DIV_2_OFF (~SSI_STCCR_DIV2)
-#define IMX_SSI_DIV_2_ON SSI_STCCR_DIV2
-
-extern struct snd_soc_dai imx_ssi_pcm_dai[4];
-extern int get_ssi_clk(int ssi, struct device *dev);
-extern void put_ssi_clk(int ssi);
-#endif
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
new file mode 100644
index 0000000..a8307d5
--- /dev/null
+++ b/sound/soc/imx/phycore-ac97.c
@@ -0,0 +1,90 @@
+/*
+ * phycore-ac97.c -- SoC audio for imx_phycore in AC97 mode
+ *
+ * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <asm/mach-types.h>
+
+#include "../codecs/wm9712.h"
+#include "imx-ssi.h"
+
+static struct snd_soc_card imx_phycore;
+
+static struct snd_soc_ops imx_phycore_hifi_ops = {
+};
+
+static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
+ {
+ .name = "HiFi",
+ .stream_name = "HiFi",
+ .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
+ .ops = &imx_phycore_hifi_ops,
+ },
+};
+
+static struct snd_soc_card imx_phycore = {
+ .name = "PhyCORE-audio",
+ .platform = &imx_soc_platform,
+ .dai_link = imx_phycore_dai_ac97,
+ .num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
+};
+
+static struct snd_soc_device imx_phycore_snd_devdata = {
+ .card = &imx_phycore,
+ .codec_dev = &soc_codec_dev_wm9712,
+};
+
+static struct platform_device *imx_phycore_snd_device;
+
+static int __init imx_phycore_init(void)
+{
+ int ret;
+
+ if (!machine_is_pcm043() && !machine_is_pca100())
+ /* return happy. We might run on a totally different machine */
+ return 0;
+
+ imx_phycore_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!imx_phycore_snd_device)
+ return -ENOMEM;
+
+ imx_phycore_dai_ac97[0].cpu_dai = &imx_ssi_pcm_dai[0];
+
+ platform_set_drvdata(imx_phycore_snd_device, &imx_phycore_snd_devdata);
+ imx_phycore_snd_devdata.dev = &imx_phycore_snd_device->dev;
+ ret = platform_device_add(imx_phycore_snd_device);
+
+ if (ret) {
+ printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+ platform_device_put(imx_phycore_snd_device);
+ }
+
+ return ret;
+}
+
+static void __exit imx_phycore_exit(void)
+{
+ platform_device_unregister(imx_phycore_snd_device);
+}
+
+late_initcall(imx_phycore_init);
+module_exit(imx_phycore_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("PhyCORE ALSA SoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 61952aa..f11963c 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -6,6 +6,9 @@
tristate
select OMAP_MCBSP
+config SND_OMAP_SOC_MCPDM
+ tristate
+
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
@@ -94,12 +97,14 @@
Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
config SND_OMAP_SOC_OMAP3_BEAGLE
- tristate "SoC Audio support for OMAP3 Beagle"
- depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_BEAGLE
+ tristate "SoC Audio support for OMAP3 Beagle and Devkit8000"
+ depends on TWL4030_CORE && SND_OMAP_SOC
+ depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000)
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
- Say Y if you want to add support for SoC audio on the Beagleboard.
+ Say Y if you want to add support for SoC audio on the Beagleboard or
+ the clone Devkit8000.
config SND_OMAP_SOC_ZOOM2
tristate "SoC Audio support for Zoom2"
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 19283e5..0bc00ca 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -1,9 +1,11 @@
# OMAP Platform Support
snd-soc-omap-objs := omap-pcm.o
snd-soc-omap-mcbsp-objs := omap-mcbsp.o
+snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o
obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
+obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
# OMAP Machine Support
snd-soc-n810-objs := n810.o
diff --git a/sound/soc/omap/mcpdm.c b/sound/soc/omap/mcpdm.c
new file mode 100644
index 0000000..ad8df6c
--- /dev/null
+++ b/sound/soc/omap/mcpdm.c
@@ -0,0 +1,484 @@
+/*
+ * mcpdm.c -- McPDM interface driver
+ *
+ * Author: Jorge Eduardo Candelaria <x0107209@ti.com>
+ * Copyright (C) 2009 - Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "mcpdm.h"
+
+static struct omap_mcpdm *mcpdm;
+
+static inline void omap_mcpdm_write(u16 reg, u32 val)
+{
+ __raw_writel(val, mcpdm->io_base + reg);
+}
+
+static inline int omap_mcpdm_read(u16 reg)
+{
+ return __raw_readl(mcpdm->io_base + reg);
+}
+
+static void omap_mcpdm_reg_dump(void)
+{
+ dev_dbg(mcpdm->dev, "***********************\n");
+ dev_dbg(mcpdm->dev, "IRQSTATUS_RAW: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_IRQSTATUS_RAW));
+ dev_dbg(mcpdm->dev, "IRQSTATUS: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_IRQSTATUS));
+ dev_dbg(mcpdm->dev, "IRQENABLE_SET: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_IRQENABLE_SET));
+ dev_dbg(mcpdm->dev, "IRQENABLE_CLR: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_IRQENABLE_CLR));
+ dev_dbg(mcpdm->dev, "IRQWAKE_EN: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_IRQWAKE_EN));
+ dev_dbg(mcpdm->dev, "DMAENABLE_SET: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_DMAENABLE_SET));
+ dev_dbg(mcpdm->dev, "DMAENABLE_CLR: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_DMAENABLE_CLR));
+ dev_dbg(mcpdm->dev, "DMAWAKEEN: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_DMAWAKEEN));
+ dev_dbg(mcpdm->dev, "CTRL: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_CTRL));
+ dev_dbg(mcpdm->dev, "DN_DATA: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_DN_DATA));
+ dev_dbg(mcpdm->dev, "UP_DATA: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_UP_DATA));
+ dev_dbg(mcpdm->dev, "FIFO_CTRL_DN: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_FIFO_CTRL_DN));
+ dev_dbg(mcpdm->dev, "FIFO_CTRL_UP: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_FIFO_CTRL_UP));
+ dev_dbg(mcpdm->dev, "DN_OFFSET: 0x%04x\n",
+ omap_mcpdm_read(MCPDM_DN_OFFSET));
+ dev_dbg(mcpdm->dev, "***********************\n");
+}
+
+/*
+ * Takes the McPDM module in and out of reset state.
+ * Uplink and downlink can be reset individually.
+ */
+static void omap_mcpdm_reset_capture(int reset)
+{
+ int ctrl = omap_mcpdm_read(MCPDM_CTRL);
+
+ if (reset)
+ ctrl |= SW_UP_RST;
+ else
+ ctrl &= ~SW_UP_RST;
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+}
+
+static void omap_mcpdm_reset_playback(int reset)
+{
+ int ctrl = omap_mcpdm_read(MCPDM_CTRL);
+
+ if (reset)
+ ctrl |= SW_DN_RST;
+ else
+ ctrl &= ~SW_DN_RST;
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+}
+
+/*
+ * Enables the transfer through the PDM interface to/from the Phoenix
+ * codec by enabling the corresponding UP or DN channels.
+ */
+void omap_mcpdm_start(int stream)
+{
+ int ctrl = omap_mcpdm_read(MCPDM_CTRL);
+
+ if (stream)
+ ctrl |= mcpdm->up_channels;
+ else
+ ctrl |= mcpdm->dn_channels;
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+}
+
+/*
+ * Disables the transfer through the PDM interface to/from the Phoenix
+ * codec by disabling the corresponding UP or DN channels.
+ */
+void omap_mcpdm_stop(int stream)
+{
+ int ctrl = omap_mcpdm_read(MCPDM_CTRL);
+
+ if (stream)
+ ctrl &= ~mcpdm->up_channels;
+ else
+ ctrl &= ~mcpdm->dn_channels;
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+}
+
+/*
+ * Configures McPDM uplink for audio recording.
+ * This function should be called before omap_mcpdm_start.
+ */
+int omap_mcpdm_capture_open(struct omap_mcpdm_link *uplink)
+{
+ int irq_mask = 0;
+ int ctrl;
+
+ if (!uplink)
+ return -EINVAL;
+
+ mcpdm->uplink = uplink;
+
+ /* Enable irq request generation */
+ irq_mask |= uplink->irq_mask & MCPDM_UPLINK_IRQ_MASK;
+ omap_mcpdm_write(MCPDM_IRQENABLE_SET, irq_mask);
+
+ /* Configure uplink threshold */
+ if (uplink->threshold > UP_THRES_MAX)
+ uplink->threshold = UP_THRES_MAX;
+
+ omap_mcpdm_write(MCPDM_FIFO_CTRL_UP, uplink->threshold);
+
+ /* Configure DMA controller */
+ omap_mcpdm_write(MCPDM_DMAENABLE_SET, DMA_UP_ENABLE);
+
+ /* Set pdm out format */
+ ctrl = omap_mcpdm_read(MCPDM_CTRL);
+ ctrl &= ~PDMOUTFORMAT;
+ ctrl |= uplink->format & PDMOUTFORMAT;
+
+ /* Uplink channels */
+ mcpdm->up_channels = uplink->channels & (PDM_UP_MASK | PDM_STATUS_MASK);
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+
+ return 0;
+}
+
+/*
+ * Configures McPDM downlink for audio playback.
+ * This function should be called before omap_mcpdm_start.
+ */
+int omap_mcpdm_playback_open(struct omap_mcpdm_link *downlink)
+{
+ int irq_mask = 0;
+ int ctrl;
+
+ if (!downlink)
+ return -EINVAL;
+
+ mcpdm->downlink = downlink;
+
+ /* Enable irq request generation */
+ irq_mask |= downlink->irq_mask & MCPDM_DOWNLINK_IRQ_MASK;
+ omap_mcpdm_write(MCPDM_IRQENABLE_SET, irq_mask);
+
+ /* Configure uplink threshold */
+ if (downlink->threshold > DN_THRES_MAX)
+ downlink->threshold = DN_THRES_MAX;
+
+ omap_mcpdm_write(MCPDM_FIFO_CTRL_DN, downlink->threshold);
+
+ /* Enable DMA request generation */
+ omap_mcpdm_write(MCPDM_DMAENABLE_SET, DMA_DN_ENABLE);
+
+ /* Set pdm out format */
+ ctrl = omap_mcpdm_read(MCPDM_CTRL);
+ ctrl &= ~PDMOUTFORMAT;
+ ctrl |= downlink->format & PDMOUTFORMAT;
+
+ /* Downlink channels */
+ mcpdm->dn_channels = downlink->channels & (PDM_DN_MASK | PDM_CMD_MASK);
+
+ omap_mcpdm_write(MCPDM_CTRL, ctrl);
+
+ return 0;
+}
+
+/*
+ * Cleans McPDM uplink configuration.
+ * This function should be called when the stream is closed.
+ */
+int omap_mcpdm_capture_close(struct omap_mcpdm_link *uplink)
+{
+ int irq_mask = 0;
+
+ if (!uplink)
+ return -EINVAL;
+
+ /* Disable irq request generation */
+ irq_mask |= uplink->irq_mask & MCPDM_UPLINK_IRQ_MASK;
+ omap_mcpdm_write(MCPDM_IRQENABLE_CLR, irq_mask);
+
+ /* Disable DMA request generation */
+ omap_mcpdm_write(MCPDM_DMAENABLE_CLR, DMA_UP_ENABLE);
+
+ /* Clear Downlink channels */
+ mcpdm->up_channels = 0;
+
+ mcpdm->uplink = NULL;
+
+ return 0;
+}
+
+/*
+ * Cleans McPDM downlink configuration.
+ * This function should be called when the stream is closed.
+ */
+int omap_mcpdm_playback_close(struct omap_mcpdm_link *downlink)
+{
+ int irq_mask = 0;
+
+ if (!downlink)
+ return -EINVAL;
+
+ /* Disable irq request generation */
+ irq_mask |= downlink->irq_mask & MCPDM_DOWNLINK_IRQ_MASK;
+ omap_mcpdm_write(MCPDM_IRQENABLE_CLR, irq_mask);
+
+ /* Disable DMA request generation */
+ omap_mcpdm_write(MCPDM_DMAENABLE_CLR, DMA_DN_ENABLE);
+
+ /* clear Downlink channels */
+ mcpdm->dn_channels = 0;
+
+ mcpdm->downlink = NULL;
+
+ return 0;
+}
+
+static irqreturn_t omap_mcpdm_irq_handler(int irq, void *dev_id)
+{
+ struct omap_mcpdm *mcpdm_irq = dev_id;
+ int irq_status;
+
+ irq_status = omap_mcpdm_read(MCPDM_IRQSTATUS);
+
+ /* Acknowledge irq event */
+ omap_mcpdm_write(MCPDM_IRQSTATUS, irq_status);
+
+ if (irq & MCPDM_DN_IRQ_FULL) {
+ dev_err(mcpdm_irq->dev, "DN FIFO error %x\n", irq_status);
+ omap_mcpdm_reset_playback(1);
+ omap_mcpdm_playback_open(mcpdm_irq->downlink);
+ omap_mcpdm_reset_playback(0);
+ }
+
+ if (irq & MCPDM_DN_IRQ_EMPTY) {
+ dev_err(mcpdm_irq->dev, "DN FIFO error %x\n", irq_status);
+ omap_mcpdm_reset_playback(1);
+ omap_mcpdm_playback_open(mcpdm_irq->downlink);
+ omap_mcpdm_reset_playback(0);
+ }
+
+ if (irq & MCPDM_DN_IRQ) {
+ dev_dbg(mcpdm_irq->dev, "DN write request\n");
+ }
+
+ if (irq & MCPDM_UP_IRQ_FULL) {
+ dev_err(mcpdm_irq->dev, "UP FIFO error %x\n", irq_status);
+ omap_mcpdm_reset_capture(1);
+ omap_mcpdm_capture_open(mcpdm_irq->uplink);
+ omap_mcpdm_reset_capture(0);
+ }
+
+ if (irq & MCPDM_UP_IRQ_EMPTY) {
+ dev_err(mcpdm_irq->dev, "UP FIFO error %x\n", irq_status);
+ omap_mcpdm_reset_capture(1);
+ omap_mcpdm_capture_open(mcpdm_irq->uplink);
+ omap_mcpdm_reset_capture(0);
+ }
+
+ if (irq & MCPDM_UP_IRQ) {
+ dev_dbg(mcpdm_irq->dev, "UP write request\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+int omap_mcpdm_request(void)
+{
+ int ret;
+
+ clk_enable(mcpdm->clk);
+
+ spin_lock(&mcpdm->lock);
+
+ if (!mcpdm->free) {
+ dev_err(mcpdm->dev, "McPDM interface is in use\n");
+ spin_unlock(&mcpdm->lock);
+ ret = -EBUSY;
+ goto err;
+ }
+ mcpdm->free = 0;
+
+ spin_unlock(&mcpdm->lock);
+
+ /* Disable lines while request is ongoing */
+ omap_mcpdm_write(MCPDM_CTRL, 0x00);
+
+ ret = request_irq(mcpdm->irq, omap_mcpdm_irq_handler,
+ 0, "McPDM", (void *)mcpdm);
+ if (ret) {
+ dev_err(mcpdm->dev, "Request for McPDM IRQ failed\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable(mcpdm->clk);
+ return ret;
+}
+
+void omap_mcpdm_free(void)
+{
+ spin_lock(&mcpdm->lock);
+ if (mcpdm->free) {
+ dev_err(mcpdm->dev, "McPDM interface is already free\n");
+ spin_unlock(&mcpdm->lock);
+ return;
+ }
+ mcpdm->free = 1;
+ spin_unlock(&mcpdm->lock);
+
+ clk_disable(mcpdm->clk);
+
+ free_irq(mcpdm->irq, (void *)mcpdm);
+}
+
+/* Enable/disable DC offset cancelation for the analog
+ * headset path (PDM channels 1 and 2).
+ */
+int omap_mcpdm_set_offset(int offset1, int offset2)
+{
+ int offset;
+
+ if ((offset1 > DN_OFST_MAX) || (offset2 > DN_OFST_MAX))
+ return -EINVAL;
+
+ offset = (offset1 << DN_OFST_RX1) | (offset2 << DN_OFST_RX2);
+
+ /* offset cancellation for channel 1 */
+ if (offset1)
+ offset |= DN_OFST_RX1_EN;
+ else
+ offset &= ~DN_OFST_RX1_EN;
+
+ /* offset cancellation for channel 2 */
+ if (offset2)
+ offset |= DN_OFST_RX2_EN;
+ else
+ offset &= ~DN_OFST_RX2_EN;
+
+ omap_mcpdm_write(MCPDM_DN_OFFSET, offset);
+
+ return 0;
+}
+
+static int __devinit omap_mcpdm_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret = 0;
+
+ mcpdm = kzalloc(sizeof(struct omap_mcpdm), GFP_KERNEL);
+ if (!mcpdm) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no resource\n");
+ goto err_resource;
+ }
+
+ spin_lock_init(&mcpdm->lock);
+ mcpdm->free = 1;
+ mcpdm->io_base = ioremap(res->start, resource_size(res));
+ if (!mcpdm->io_base) {
+ ret = -ENOMEM;
+ goto err_resource;
+ }
+
+ mcpdm->irq = platform_get_irq(pdev, 0);
+
+ mcpdm->clk = clk_get(&pdev->dev, "pdm_ck");
+ if (IS_ERR(mcpdm->clk)) {
+ ret = PTR_ERR(mcpdm->clk);
+ dev_err(&pdev->dev, "unable to get pdm_ck: %d\n", ret);
+ goto err_clk;
+ }
+
+ mcpdm->dev = &pdev->dev;
+ platform_set_drvdata(pdev, mcpdm);
+
+ return 0;
+
+err_clk:
+ iounmap(mcpdm->io_base);
+err_resource:
+ kfree(mcpdm);
+exit:
+ return ret;
+}
+
+static int __devexit omap_mcpdm_remove(struct platform_device *pdev)
+{
+ struct omap_mcpdm *mcpdm_ptr = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ clk_put(mcpdm_ptr->clk);
+
+ iounmap(mcpdm_ptr->io_base);
+
+ mcpdm_ptr->clk = NULL;
+ mcpdm_ptr->free = 0;
+ mcpdm_ptr->dev = NULL;
+
+ kfree(mcpdm_ptr);
+
+ return 0;
+}
+
+static struct platform_driver omap_mcpdm_driver = {
+ .probe = omap_mcpdm_probe,
+ .remove = __devexit_p(omap_mcpdm_remove),
+ .driver = {
+ .name = "omap-mcpdm",
+ },
+};
+
+static struct platform_device *omap_mcpdm_device;
+
+static int __init omap_mcpdm_init(void)
+{
+ return platform_driver_register(&omap_mcpdm_driver);
+}
+arch_initcall(omap_mcpdm_init);
diff --git a/sound/soc/omap/mcpdm.h b/sound/soc/omap/mcpdm.h
new file mode 100644
index 0000000..7bb326e
--- /dev/null
+++ b/sound/soc/omap/mcpdm.h
@@ -0,0 +1,151 @@
+/*
+ * mcpdm.h -- Defines for McPDM driver
+ *
+ * Author: Jorge Eduardo Candelaria <x0107209@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+/* McPDM registers */
+
+#define MCPDM_REVISION 0x00
+#define MCPDM_SYSCONFIG 0x10
+#define MCPDM_IRQSTATUS_RAW 0x24
+#define MCPDM_IRQSTATUS 0x28
+#define MCPDM_IRQENABLE_SET 0x2C
+#define MCPDM_IRQENABLE_CLR 0x30
+#define MCPDM_IRQWAKE_EN 0x34
+#define MCPDM_DMAENABLE_SET 0x38
+#define MCPDM_DMAENABLE_CLR 0x3C
+#define MCPDM_DMAWAKEEN 0x40
+#define MCPDM_CTRL 0x44
+#define MCPDM_DN_DATA 0x48
+#define MCPDM_UP_DATA 0x4C
+#define MCPDM_FIFO_CTRL_DN 0x50
+#define MCPDM_FIFO_CTRL_UP 0x54
+#define MCPDM_DN_OFFSET 0x58
+
+/*
+ * MCPDM_IRQ bit fields
+ * IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR
+ */
+
+#define MCPDM_DN_IRQ (1 << 0)
+#define MCPDM_DN_IRQ_EMPTY (1 << 1)
+#define MCPDM_DN_IRQ_ALMST_EMPTY (1 << 2)
+#define MCPDM_DN_IRQ_FULL (1 << 3)
+
+#define MCPDM_UP_IRQ (1 << 8)
+#define MCPDM_UP_IRQ_EMPTY (1 << 9)
+#define MCPDM_UP_IRQ_ALMST_FULL (1 << 10)
+#define MCPDM_UP_IRQ_FULL (1 << 11)
+
+#define MCPDM_DOWNLINK_IRQ_MASK 0x00F
+#define MCPDM_UPLINK_IRQ_MASK 0xF00
+
+/*
+ * MCPDM_DMAENABLE bit fields
+ */
+
+#define DMA_DN_ENABLE 0x1
+#define DMA_UP_ENABLE 0x2
+
+/*
+ * MCPDM_CTRL bit fields
+ */
+
+#define PDM_UP1_EN 0x0001
+#define PDM_UP2_EN 0x0002
+#define PDM_UP3_EN 0x0004
+#define PDM_DN1_EN 0x0008
+#define PDM_DN2_EN 0x0010
+#define PDM_DN3_EN 0x0020
+#define PDM_DN4_EN 0x0040
+#define PDM_DN5_EN 0x0080
+#define PDMOUTFORMAT 0x0100
+#define CMD_INT 0x0200
+#define STATUS_INT 0x0400
+#define SW_UP_RST 0x0800
+#define SW_DN_RST 0x1000
+#define PDM_UP_MASK 0x007
+#define PDM_DN_MASK 0x0F8
+#define PDM_CMD_MASK 0x200
+#define PDM_STATUS_MASK 0x400
+
+
+#define PDMOUTFORMAT_LJUST (0 << 8)
+#define PDMOUTFORMAT_RJUST (1 << 8)
+
+/*
+ * MCPDM_FIFO_CTRL bit fields
+ */
+
+#define UP_THRES_MAX 0xF
+#define DN_THRES_MAX 0xF
+
+/*
+ * MCPDM_DN_OFFSET bit fields
+ */
+
+#define DN_OFST_RX1_EN 0x0001
+#define DN_OFST_RX2_EN 0x0100
+
+#define DN_OFST_RX1 1
+#define DN_OFST_RX2 9
+#define DN_OFST_MAX 0x1F
+
+#define MCPDM_UPLINK 1
+#define MCPDM_DOWNLINK 2
+
+struct omap_mcpdm_link {
+ int irq_mask;
+ int threshold;
+ int format;
+ int channels;
+};
+
+struct omap_mcpdm_platform_data {
+ unsigned long phys_base;
+ u16 irq;
+};
+
+struct omap_mcpdm {
+ struct device *dev;
+ unsigned long phys_base;
+ void __iomem *io_base;
+ u8 free;
+ int irq;
+
+ spinlock_t lock;
+ struct omap_mcpdm_platform_data *pdata;
+ struct clk *clk;
+ struct omap_mcpdm_link *downlink;
+ struct omap_mcpdm_link *uplink;
+ struct completion irq_completion;
+
+ int dn_channels;
+ int up_channels;
+};
+
+extern void omap_mcpdm_start(int stream);
+extern void omap_mcpdm_stop(int stream);
+extern int omap_mcpdm_capture_open(struct omap_mcpdm_link *uplink);
+extern int omap_mcpdm_playback_open(struct omap_mcpdm_link *downlink);
+extern int omap_mcpdm_capture_close(struct omap_mcpdm_link *uplink);
+extern int omap_mcpdm_playback_close(struct omap_mcpdm_link *downlink);
+extern int omap_mcpdm_request(void);
+extern void omap_mcpdm_free(void);
+extern int omap_mcpdm_set_offset(int offset1, int offset2);
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6bbbd2a..e814a95 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -39,6 +39,14 @@
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)
+#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \
+ xhandler_get, xhandler_put) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = omap_mcbsp_st_info_volsw, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long) &(struct soc_mixer_control) \
+ {.min = xmin, .max = xmax} }
+
struct omap_mcbsp_data {
unsigned int bus_id;
struct omap_mcbsp_reg_cfg regs;
@@ -82,11 +90,11 @@
static const unsigned long omap1_mcbsp_port[][2] = {};
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static const int omap24xx_dma_reqs[][2] = {
{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
{ OMAP24XX_DMA_MCBSP3_TX, OMAP24XX_DMA_MCBSP3_RX },
{ OMAP24XX_DMA_MCBSP4_TX, OMAP24XX_DMA_MCBSP4_RX },
{ OMAP24XX_DMA_MCBSP5_TX, OMAP24XX_DMA_MCBSP5_RX },
@@ -124,7 +132,7 @@
static const unsigned long omap2430_mcbsp_port[][2] = {};
#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
static const unsigned long omap34xx_mcbsp_port[][2] = {
{ OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR,
OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR },
@@ -287,6 +295,8 @@
omap_mcbsp_dai_dma_params[id][substream->stream].dma_req = dma;
omap_mcbsp_dai_dma_params[id][substream->stream].port_addr = port;
omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
+ omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
+ OMAP_DMA_DATA_TYPE_S16;
cpu_dai->dma_data = &omap_mcbsp_dai_dma_params[id][substream->stream];
if (mcbsp_data->configured) {
@@ -637,6 +647,136 @@
EXPORT_SYMBOL_GPL(omap_mcbsp_dai);
+int omap_mcbsp_st_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int max = mc->max;
+ int min = mc->min;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = min;
+ uinfo->value.integer.max = max;
+ return 0;
+}
+
+#define OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(id, channel) \
+static int \
+omap_mcbsp##id##_set_st_ch##channel##_volume(struct snd_kcontrol *kc, \
+ struct snd_ctl_elem_value *uc) \
+{ \
+ struct soc_mixer_control *mc = \
+ (struct soc_mixer_control *)kc->private_value; \
+ int max = mc->max; \
+ int min = mc->min; \
+ int val = uc->value.integer.value[0]; \
+ \
+ if (val < min || val > max) \
+ return -EINVAL; \
+ \
+ /* OMAP McBSP implementation uses index values 0..4 */ \
+ return omap_st_set_chgain((id)-1, channel, val); \
+}
+
+#define OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(id, channel) \
+static int \
+omap_mcbsp##id##_get_st_ch##channel##_volume(struct snd_kcontrol *kc, \
+ struct snd_ctl_elem_value *uc) \
+{ \
+ s16 chgain; \
+ \
+ if (omap_st_get_chgain((id)-1, channel, &chgain)) \
+ return -EAGAIN; \
+ \
+ uc->value.integer.value[0] = chgain; \
+ return 0; \
+}
+
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(2, 0)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(2, 1)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(3, 0)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(3, 1)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(2, 0)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(2, 1)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(3, 0)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(3, 1)
+
+static int omap_mcbsp_st_put_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ u8 value = ucontrol->value.integer.value[0];
+
+ if (value == omap_st_is_enabled(mc->reg))
+ return 0;
+
+ if (value)
+ omap_st_enable(mc->reg);
+ else
+ omap_st_disable(mc->reg);
+
+ return 1;
+}
+
+static int omap_mcbsp_st_get_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+
+ ucontrol->value.integer.value[0] = omap_st_is_enabled(mc->reg);
+ return 0;
+}
+
+static const struct snd_kcontrol_new omap_mcbsp2_st_controls[] = {
+ SOC_SINGLE_EXT("McBSP2 Sidetone Switch", 1, 0, 1, 0,
+ omap_mcbsp_st_get_mode, omap_mcbsp_st_put_mode),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP2 Sidetone Channel 0 Volume",
+ -32768, 32767,
+ omap_mcbsp2_get_st_ch0_volume,
+ omap_mcbsp2_set_st_ch0_volume),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP2 Sidetone Channel 1 Volume",
+ -32768, 32767,
+ omap_mcbsp2_get_st_ch1_volume,
+ omap_mcbsp2_set_st_ch1_volume),
+};
+
+static const struct snd_kcontrol_new omap_mcbsp3_st_controls[] = {
+ SOC_SINGLE_EXT("McBSP3 Sidetone Switch", 2, 0, 1, 0,
+ omap_mcbsp_st_get_mode, omap_mcbsp_st_put_mode),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP3 Sidetone Channel 0 Volume",
+ -32768, 32767,
+ omap_mcbsp3_get_st_ch0_volume,
+ omap_mcbsp3_set_st_ch0_volume),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP3 Sidetone Channel 1 Volume",
+ -32768, 32767,
+ omap_mcbsp3_get_st_ch1_volume,
+ omap_mcbsp3_set_st_ch1_volume),
+};
+
+int omap_mcbsp_st_add_controls(struct snd_soc_codec *codec, int mcbsp_id)
+{
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ switch (mcbsp_id) {
+ case 1: /* McBSP 2 */
+ return snd_soc_add_controls(codec, omap_mcbsp2_st_controls,
+ ARRAY_SIZE(omap_mcbsp2_st_controls));
+ case 2: /* McBSP 3 */
+ return snd_soc_add_controls(codec, omap_mcbsp3_st_controls,
+ ARRAY_SIZE(omap_mcbsp3_st_controls));
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(omap_mcbsp_st_add_controls);
+
static int __init snd_omap_mcbsp_init(void)
{
return snd_soc_register_dais(omap_mcbsp_dai,
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index 647d2f9..6c363e5 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -50,11 +50,13 @@
#undef NUM_LINKS
#define NUM_LINKS 3
#endif
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
#undef NUM_LINKS
#define NUM_LINKS 5
#endif
extern struct snd_soc_dai omap_mcbsp_dai[NUM_LINKS];
+int omap_mcbsp_st_add_controls(struct snd_soc_codec *codec, int mcbsp_id);
+
#endif
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
new file mode 100644
index 0000000..25f19e4
--- /dev/null
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -0,0 +1,251 @@
+/*
+ * omap-mcpdm.c -- OMAP ALSA SoC DAI driver using McPDM port
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Misael Lopez Cruz <x0052729@ti.com>
+ * Contact: Jorge Eduardo Candelaria <x0107209@ti.com>
+ * Margarita Olaya <magi.olaya@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
+#include "mcpdm.h"
+#include "omap-mcpdm.h"
+#include "omap-pcm.h"
+
+struct omap_mcpdm_data {
+ struct omap_mcpdm_link *links;
+ int active;
+};
+
+static struct omap_mcpdm_link omap_mcpdm_links[] = {
+ /* downlink */
+ {
+ .irq_mask = MCPDM_DN_IRQ_EMPTY | MCPDM_DN_IRQ_FULL,
+ .threshold = 1,
+ .format = PDMOUTFORMAT_LJUST,
+ },
+ /* uplink */
+ {
+ .irq_mask = MCPDM_UP_IRQ_EMPTY | MCPDM_UP_IRQ_FULL,
+ .threshold = 1,
+ .format = PDMOUTFORMAT_LJUST,
+ },
+};
+
+static struct omap_mcpdm_data mcpdm_data = {
+ .links = omap_mcpdm_links,
+ .active = 0,
+};
+
+/*
+ * Stream DMA parameters
+ */
+static struct omap_pcm_dma_data omap_mcpdm_dai_dma_params[] = {
+ {
+ .name = "Audio playback",
+ .dma_req = OMAP44XX_DMA_MCPDM_DL,
+ .data_type = OMAP_DMA_DATA_TYPE_S32,
+ .sync_mode = OMAP_DMA_SYNC_PACKET,
+ .packet_size = 16,
+ .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_DN_DATA,
+ },
+ {
+ .name = "Audio capture",
+ .dma_req = OMAP44XX_DMA_MCPDM_UP,
+ .data_type = OMAP_DMA_DATA_TYPE_S32,
+ .sync_mode = OMAP_DMA_SYNC_PACKET,
+ .packet_size = 16,
+ .port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_UP_DATA,
+ },
+};
+
+static int omap_mcpdm_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int err = 0;
+
+ if (!cpu_dai->active)
+ err = omap_mcpdm_request();
+
+ return err;
+}
+
+static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (!cpu_dai->active)
+ omap_mcpdm_free();
+}
+
+static int omap_mcpdm_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct omap_mcpdm_data *mcpdm_priv = cpu_dai->private_data;
+ int stream = substream->stream;
+ int err = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (!mcpdm_priv->active++)
+ omap_mcpdm_start(stream);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (!--mcpdm_priv->active)
+ omap_mcpdm_stop(stream);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct omap_mcpdm_data *mcpdm_priv = cpu_dai->private_data;
+ struct omap_mcpdm_link *mcpdm_links = mcpdm_priv->links;
+ int stream = substream->stream;
+ int channels, err, link_mask = 0;
+
+ cpu_dai->dma_data = &omap_mcpdm_dai_dma_params[stream];
+
+ channels = params_channels(params);
+ switch (channels) {
+ case 4:
+ if (stream == SNDRV_PCM_STREAM_CAPTURE)
+ /* up to 2 channels for capture */
+ return -EINVAL;
+ link_mask |= 1 << 3;
+ case 3:
+ if (stream == SNDRV_PCM_STREAM_CAPTURE)
+ /* up to 2 channels for capture */
+ return -EINVAL;
+ link_mask |= 1 << 2;
+ case 2:
+ link_mask |= 1 << 1;
+ case 1:
+ link_mask |= 1 << 0;
+ break;
+ default:
+ /* unsupported number of channels */
+ return -EINVAL;
+ }
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ mcpdm_links[stream].channels = link_mask << 3;
+ err = omap_mcpdm_playback_open(&mcpdm_links[stream]);
+ } else {
+ mcpdm_links[stream].channels = link_mask << 0;
+ err = omap_mcpdm_capture_open(&mcpdm_links[stream]);
+ }
+
+ return err;
+}
+
+static int omap_mcpdm_dai_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct omap_mcpdm_data *mcpdm_priv = cpu_dai->private_data;
+ struct omap_mcpdm_link *mcpdm_links = mcpdm_priv->links;
+ int stream = substream->stream;
+ int err;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ err = omap_mcpdm_playback_close(&mcpdm_links[stream]);
+ else
+ err = omap_mcpdm_capture_close(&mcpdm_links[stream]);
+
+ return err;
+}
+
+static struct snd_soc_dai_ops omap_mcpdm_dai_ops = {
+ .startup = omap_mcpdm_dai_startup,
+ .shutdown = omap_mcpdm_dai_shutdown,
+ .trigger = omap_mcpdm_dai_trigger,
+ .hw_params = omap_mcpdm_dai_hw_params,
+ .hw_free = omap_mcpdm_dai_hw_free,
+};
+
+#define OMAP_MCPDM_RATES (SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+#define OMAP_MCPDM_FORMATS (SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai omap_mcpdm_dai = {
+ .name = "omap-mcpdm",
+ .id = -1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 4,
+ .rates = OMAP_MCPDM_RATES,
+ .formats = OMAP_MCPDM_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = OMAP_MCPDM_RATES,
+ .formats = OMAP_MCPDM_FORMATS,
+ },
+ .ops = &omap_mcpdm_dai_ops,
+ .private_data = &mcpdm_data,
+};
+EXPORT_SYMBOL_GPL(omap_mcpdm_dai);
+
+static int __init snd_omap_mcpdm_init(void)
+{
+ return snd_soc_register_dai(&omap_mcpdm_dai);
+}
+module_init(snd_omap_mcpdm_init);
+
+static void __exit snd_omap_mcpdm_exit(void)
+{
+ snd_soc_unregister_dai(&omap_mcpdm_dai);
+}
+module_exit(snd_omap_mcpdm_exit);
+
+MODULE_AUTHOR("Misael Lopez Cruz <x0052729@ti.com>");
+MODULE_DESCRIPTION("OMAP PDM SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcpdm.h b/sound/soc/omap/omap-mcpdm.h
new file mode 100644
index 0000000..73b80d5
--- /dev/null
+++ b/sound/soc/omap/omap-mcpdm.h
@@ -0,0 +1,29 @@
+/*
+ * omap-mcpdm.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Contact: Misael Lopez Cruz <x0052729@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __OMAP_MCPDM_H__
+#define __OMAP_MCPDM_H__
+
+extern struct snd_soc_dai omap_mcpdm_dai;
+
+#endif /* End of __OMAP_MCPDM_H__ */
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 9db2770..825db38 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -37,7 +37,8 @@
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_RESUME,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
.period_bytes_min = 32,
.period_bytes_max = 64 * 1024,
.periods_min = 2,
@@ -149,6 +150,7 @@
struct omap_runtime_data *prtd = runtime->private_data;
struct omap_pcm_dma_data *dma_data = prtd->dma_data;
struct omap_dma_channel_params dma_params;
+ int bytes;
/* return if this is a bufferless transfer e.g.
* codec <--> BT codec or GSM modem -- lg FIXME */
@@ -156,11 +158,7 @@
return 0;
memset(&dma_params, 0, sizeof(dma_params));
- /*
- * Note: Regardless of interface data formats supported by OMAP McBSP
- * or EAC blocks, internal representation is always fixed 16-bit/sample
- */
- dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+ dma_params.data_type = dma_data->data_type;
dma_params.trigger = dma_data->dma_req;
dma_params.sync_mode = dma_data->sync_mode;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
@@ -170,6 +168,7 @@
dma_params.src_start = runtime->dma_addr;
dma_params.dst_start = dma_data->port_addr;
dma_params.dst_port = OMAP_DMA_PORT_MPUI;
+ dma_params.dst_fi = dma_data->packet_size;
} else {
dma_params.src_amode = OMAP_DMA_AMODE_CONSTANT;
dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;
@@ -177,6 +176,7 @@
dma_params.src_start = dma_data->port_addr;
dma_params.dst_start = runtime->dma_addr;
dma_params.src_port = OMAP_DMA_PORT_MPUI;
+ dma_params.src_fi = dma_data->packet_size;
}
/*
* Set DMA transfer frame size equal to ALSA period size and frame
@@ -184,7 +184,8 @@
* we can transfer the whole ALSA buffer with single DMA transfer but
* still can get an interrupt at each period bounary
*/
- dma_params.elem_count = snd_pcm_lib_period_bytes(substream) / 2;
+ bytes = snd_pcm_lib_period_bytes(substream);
+ dma_params.elem_count = bytes >> dma_data->data_type;
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h
index 38a821d..b19975d 100644
--- a/sound/soc/omap/omap-pcm.h
+++ b/sound/soc/omap/omap-pcm.h
@@ -29,8 +29,10 @@
char *name; /* stream identifier */
int dma_req; /* DMA request line */
unsigned long port_addr; /* transmit/receive register */
- int sync_mode; /* DMA sync mode */
void (*set_threshold)(struct snd_pcm_substream *substream);
+ int data_type; /* data type 8,16,32 */
+ int sync_mode; /* DMA sync mode */
+ int packet_size; /* packet size only in PACKET mode */
};
extern struct snd_soc_platform omap_soc_platform;
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index d88ad5c..240e097 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -117,11 +117,11 @@
{
int ret;
- if (!machine_is_omap3_beagle()) {
- pr_debug("Not OMAP3 Beagle!\n");
+ if (!(machine_is_omap3_beagle() || machine_is_devkit8000())) {
+ pr_debug("Not OMAP3 Beagle or Devkit8000!\n");
return -ENODEV;
}
- pr_info("OMAP3 Beagle SoC init\n");
+ pr_info("OMAP3 Beagle/Devkit8000 SoC init\n");
omap3beagle_snd_device = platform_device_alloc("soc-audio", -1);
if (!omap3beagle_snd_device) {
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 68980c1..de10f76 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -40,6 +41,8 @@
#define PREFIX "ASoC omap3pandora: "
+static struct regulator *omap3pandora_dac_reg;
+
static int omap3pandora_cmn_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, unsigned int fmt)
{
@@ -106,17 +109,33 @@
SND_SOC_DAIFMT_CBS_CFS);
}
+static int omap3pandora_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ /*
+ * The PCM1773 DAC datasheet requires 1ms delay between switching
+ * VCC power on/off and /PD pin high/low
+ */
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ regulator_enable(omap3pandora_dac_reg);
+ mdelay(1);
+ gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 1);
+ } else {
+ gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
+ mdelay(1);
+ regulator_disable(omap3pandora_dac_reg);
+ }
+
+ return 0;
+}
+
static int omap3pandora_hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event)) {
- gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 1);
+ if (SND_SOC_DAPM_EVENT_ON(event))
gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 1);
- } else {
+ else
gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 0);
- mdelay(1);
- gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
- }
return 0;
}
@@ -130,7 +149,9 @@
* |P| <--- TWL4030 <--------- Line In and MICs
*/
static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = {
- SND_SOC_DAPM_DAC("PCM DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC_E("PCM DAC", "HiFi Playback", SND_SOC_NOPM,
+ 0, 0, omap3pandora_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM,
0, 0, NULL, 0, omap3pandora_hp_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
@@ -306,8 +327,18 @@
goto fail2;
}
+ omap3pandora_dac_reg = regulator_get(&omap3pandora_snd_device->dev, "vcc");
+ if (IS_ERR(omap3pandora_dac_reg)) {
+ pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
+ dev_name(&omap3pandora_snd_device->dev),
+ PTR_ERR(omap3pandora_dac_reg));
+ goto fail3;
+ }
+
return 0;
+fail3:
+ platform_device_del(omap3pandora_snd_device);
fail2:
platform_device_put(omap3pandora_snd_device);
fail1:
@@ -320,6 +351,7 @@
static void __exit omap3pandora_soc_exit(void)
{
+ regulator_put(omap3pandora_dac_reg);
platform_device_unregister(omap3pandora_snd_device);
gpio_free(OMAP3_PANDORA_AMP_POWER_GPIO);
gpio_free(OMAP3_PANDORA_DAC_POWER_GPIO);
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 3bd7712..e69397f 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -135,10 +135,11 @@
struct ssp_priv *priv = cpu_dai->private_data;
if (!cpu_dai->active)
- return 0;
+ clk_enable(priv->dev.ssp->clk);
ssp_save_state(&priv->dev, &priv->state);
clk_disable(priv->dev.ssp->clk);
+
return 0;
}
@@ -146,12 +147,13 @@
{
struct ssp_priv *priv = cpu_dai->private_data;
- if (!cpu_dai->active)
- return 0;
-
clk_enable(priv->dev.ssp->clk);
ssp_restore_state(&priv->dev, &priv->state);
- ssp_enable(&priv->dev);
+
+ if (cpu_dai->active)
+ ssp_enable(&priv->dev);
+ else
+ clk_disable(priv->dev.ssp->clk);
return 0;
}
diff --git a/sound/soc/pxa/raumfeld.c b/sound/soc/pxa/raumfeld.c
index acfce1c..7e3f416 100644
--- a/sound/soc/pxa/raumfeld.c
+++ b/sound/soc/pxa/raumfeld.c
@@ -41,7 +41,9 @@
};
#define MAX9485_MCLK_FREQ_112896 0x22
-#define MAX9485_MCLK_FREQ_122880 0x23
+#define MAX9485_MCLK_FREQ_122880 0x23
+#define MAX9485_MCLK_FREQ_225792 0x32
+#define MAX9485_MCLK_FREQ_245760 0x33
static void set_max9485_clk(char clk)
{
@@ -71,9 +73,17 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- set_max9485_clk(MAX9485_MCLK_FREQ_112896);
+ /* set freq to 0 to enable all possible codec sample rates */
+ return snd_soc_dai_set_sysclk(codec_dai, 0, 0, 0);
+}
- return snd_soc_dai_set_sysclk(codec_dai, 0, 11289600, 0);
+static void raumfeld_cs4270_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* set freq to 0 to enable all possible codec sample rates */
+ snd_soc_dai_set_sysclk(codec_dai, 0, 0, 0);
}
static int raumfeld_cs4270_hw_params(struct snd_pcm_substream *substream,
@@ -86,20 +96,24 @@
int ret = 0;
switch (params_rate(params)) {
- case 8000:
- case 16000:
- case 48000:
- case 96000:
- set_max9485_clk(MAX9485_MCLK_FREQ_122880);
- clk = 12288000;
- break;
- case 11025:
- case 22050:
case 44100:
- case 88200:
set_max9485_clk(MAX9485_MCLK_FREQ_112896);
clk = 11289600;
break;
+ case 48000:
+ set_max9485_clk(MAX9485_MCLK_FREQ_122880);
+ clk = 12288000;
+ break;
+ case 88200:
+ set_max9485_clk(MAX9485_MCLK_FREQ_225792);
+ clk = 22579200;
+ break;
+ case 96000:
+ set_max9485_clk(MAX9485_MCLK_FREQ_245760);
+ clk = 24576000;
+ break;
+ default:
+ return -EINVAL;
}
fmt = SND_SOC_DAIFMT_I2S |
@@ -128,7 +142,7 @@
if (ret < 0)
return ret;
- ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, 0, 1);
+ ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, clk, 1);
if (ret < 0)
return ret;
@@ -137,6 +151,7 @@
static struct snd_soc_ops raumfeld_cs4270_ops = {
.startup = raumfeld_cs4270_startup,
+ .shutdown = raumfeld_cs4270_shutdown,
.hw_params = raumfeld_cs4270_hw_params,
};
@@ -181,20 +196,24 @@
int fmt, ret = 0, clk = 0;
switch (params_rate(params)) {
- case 8000:
- case 16000:
- case 48000:
- case 96000:
- set_max9485_clk(MAX9485_MCLK_FREQ_122880);
- clk = 12288000;
- break;
- case 11025:
- case 22050:
case 44100:
- case 88200:
set_max9485_clk(MAX9485_MCLK_FREQ_112896);
clk = 11289600;
break;
+ case 48000:
+ set_max9485_clk(MAX9485_MCLK_FREQ_122880);
+ clk = 12288000;
+ break;
+ case 88200:
+ set_max9485_clk(MAX9485_MCLK_FREQ_225792);
+ clk = 22579200;
+ break;
+ case 96000:
+ set_max9485_clk(MAX9485_MCLK_FREQ_245760);
+ clk = 24576000;
+ break;
+ default:
+ return -EINVAL;
}
fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF;
@@ -217,7 +236,7 @@
if (ret < 0)
return ret;
- ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, 0, 1);
+ ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, clk, 1);
if (ret < 0)
return ret;
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index b489f1a..15fe57e 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -27,12 +27,10 @@
config SND_S3C_SOC_PCM
tristate
-config SND_S3C2443_SOC_AC97
+config SND_S3C_SOC_AC97
tristate
- select S3C2410_DMA
- select AC97_BUS
select SND_SOC_AC97_BUS
-
+
config SND_S3C24XX_SOC_NEO1973_WM8753
tristate "SoC I2S Audio support for NEO1973 - WM8753"
depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA01
@@ -71,8 +69,10 @@
config SND_S3C24XX_SOC_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
depends on SND_S3C24XX_SOC && MACH_SMDK2443
- select SND_S3C2443_SOC_AC97
+ select S3C2410_DMA
+ select AC97_BUS
select SND_SOC_AC97_CODEC
+ select SND_S3C_SOC_AC97
help
Say Y if you want to add support for SoC audio on smdk2443
with the WM9710.
@@ -80,8 +80,10 @@
config SND_S3C24XX_SOC_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
depends on SND_S3C24XX_SOC && ARCH_S3C2410
- select SND_S3C2443_SOC_AC97
+ select S3C2410_DMA
+ select AC97_BUS
select SND_SOC_AC97_CODEC
+ select SND_S3C_SOC_AC97
help
Say Y if you want to add support for SoC audio on ln2440sbc
with the ALC650.
@@ -111,3 +113,11 @@
select SND_S3C24XX_SOC_I2S
select SND_SOC_TLV320AIC3X
select SND_S3C24XX_SOC_SIMTEC
+
+config SND_SOC_SMDK_WM9713
+ tristate "SoC AC97 Audio support for SMDK with WM9713"
+ depends on SND_S3C24XX_SOC && MACH_SMDK6410
+ select SND_SOC_WM9713
+ select SND_S3C_SOC_AC97
+ help
+ Sat Y if you want to add support for SoC audio on the SMDK.
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index b744657..df071a3 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -3,13 +3,13 @@
snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
-snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o
+snd-soc-s3c-ac97-objs := s3c-ac97.o
snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
snd-soc-s3c-pcm-objs := s3c-pcm.o
obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
-obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o
+obj-$(CONFIG_SND_S3C_SOC_AC97) += snd-soc-s3c-ac97.o
obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
@@ -26,6 +26,7 @@
snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
+snd-soc-smdk-wm9713-objs := smdk_wm9713.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -37,4 +38,4 @@
obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
-
+obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index d00d359..ffa954f 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -25,7 +25,7 @@
#include "../codecs/ac97.h"
#include "s3c-dma.h"
-#include "s3c24xx-ac97.h"
+#include "s3c-ac97.h"
static struct snd_soc_card ln2440sbc;
@@ -33,7 +33,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai = &s3c2443_ac97_dai[0],
+ .cpu_dai = &s3c_ac97_dai[S3C_AC97_DAI_PCM],
.codec_dai = &ac97_dai,
},
};
diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c
new file mode 100644
index 0000000..ee8ed9d7
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-ac97.c
@@ -0,0 +1,518 @@
+/* sound/soc/s3c24xx/s3c-ac97.c
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ * Evolved from s3c2443-ac97.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <sound/soc.h>
+
+#include <plat/regs-ac97.h>
+#include <mach/dma.h>
+#include <plat/audio.h>
+
+#include "s3c-dma.h"
+#include "s3c-ac97.h"
+
+#define AC_CMD_ADDR(x) (x << 16)
+#define AC_CMD_DATA(x) (x & 0xffff)
+
+struct s3c_ac97_info {
+ unsigned state;
+ struct clk *ac97_clk;
+ void __iomem *regs;
+ struct mutex lock;
+ struct completion done;
+};
+static struct s3c_ac97_info s3c_ac97;
+
+static struct s3c2410_dma_client s3c_dma_client_out = {
+ .name = "AC97 PCMOut"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_in = {
+ .name = "AC97 PCMIn"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_micin = {
+ .name = "AC97 MicIn"
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_out = {
+ .client = &s3c_dma_client_out,
+ .dma_size = 4,
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_in = {
+ .client = &s3c_dma_client_in,
+ .dma_size = 4,
+};
+
+static struct s3c_dma_params s3c_ac97_mic_in = {
+ .client = &s3c_dma_client_micin,
+ .dma_size = 4,
+};
+
+static void s3c_ac97_activate(struct snd_ac97 *ac97)
+{
+ u32 ac_glbctrl, stat;
+
+ stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+ if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+ return; /* Return if already active */
+
+ INIT_COMPLETION(s3c_ac97.done);
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+
+ ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+ printk(KERN_ERR "AC97: Unable to activate!");
+}
+
+static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ u32 ac_glbctrl, ac_codec_cmd;
+ u32 stat, addr, data;
+
+ mutex_lock(&s3c_ac97.lock);
+
+ s3c_ac97_activate(ac97);
+
+ INIT_COMPLETION(s3c_ac97.done);
+
+ ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+ ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
+ writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+ udelay(50);
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+ printk(KERN_ERR "AC97: Unable to read!");
+
+ stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
+ addr = (stat >> 16) & 0x7f;
+ data = (stat & 0xffff);
+
+ if (addr != reg)
+ printk(KERN_ERR "s3c-ac97: req addr = %02x, rep addr = %02x\n", reg, addr);
+
+ mutex_unlock(&s3c_ac97.lock);
+
+ return (unsigned short)data;
+}
+
+static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ u32 ac_glbctrl, ac_codec_cmd;
+
+ mutex_lock(&s3c_ac97.lock);
+
+ s3c_ac97_activate(ac97);
+
+ INIT_COMPLETION(s3c_ac97.done);
+
+ ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+ ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
+ writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+ udelay(50);
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+ printk(KERN_ERR "AC97: Unable to write!");
+
+ ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+ ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
+ writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+ mutex_unlock(&s3c_ac97.lock);
+}
+
+static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ writel(S3C_AC97_GLBCTRL_COLDRESET,
+ s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+
+ writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+}
+
+static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ u32 stat;
+
+ stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+ if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+ return; /* Return if already active */
+
+ writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+
+ writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ msleep(1);
+
+ s3c_ac97_activate(ac97);
+}
+
+static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
+{
+ u32 ac_glbctrl, ac_glbstat;
+
+ ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
+
+ if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ complete(&s3c_ac97.done);
+ }
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl |= (1<<30); /* Clear interrupt */
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ return IRQ_HANDLED;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+ .read = s3c_ac97_read,
+ .write = s3c_ac97_write,
+ .warm_reset = s3c_ac97_warm_reset,
+ .reset = s3c_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ cpu_dai->dma_data = &s3c_ac97_pcm_out;
+ else
+ cpu_dai->dma_data = &s3c_ac97_pcm_in;
+
+ return 0;
+}
+
+static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
+ else
+ ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
+ else
+ ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ break;
+ }
+
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
+ return 0;
+}
+
+static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return -ENODEV;
+ else
+ cpu_dai->dma_data = &s3c_ac97_mic_in;
+
+ return 0;
+}
+
+static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
+
+ ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+ ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ break;
+ }
+
+ writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops s3c_ac97_dai_ops = {
+ .hw_params = s3c_ac97_hw_params,
+ .trigger = s3c_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
+ .hw_params = s3c_ac97_hw_mic_params,
+ .trigger = s3c_ac97_mic_trigger,
+};
+
+struct snd_soc_dai s3c_ac97_dai[] = {
+ [S3C_AC97_DAI_PCM] = {
+ .name = "s3c-ac97",
+ .id = S3C_AC97_DAI_PCM,
+ .ac97_control = 1,
+ .playback = {
+ .stream_name = "AC97 Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .stream_name = "AC97 Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = &s3c_ac97_dai_ops,
+ },
+ [S3C_AC97_DAI_MIC] = {
+ .name = "s3c-ac97-mic",
+ .id = S3C_AC97_DAI_MIC,
+ .ac97_control = 1,
+ .capture = {
+ .stream_name = "AC97 Mic Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = &s3c_ac97_mic_dai_ops,
+ },
+};
+EXPORT_SYMBOL_GPL(s3c_ac97_dai);
+
+static __devinit int s3c_ac97_probe(struct platform_device *pdev)
+{
+ struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
+ struct s3c_audio_pdata *ac97_pdata;
+ int ret;
+
+ ac97_pdata = pdev->dev.platform_data;
+ if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
+ dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
+ return -EINVAL;
+ }
+
+ /* Check for availability of necessary resource */
+ dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmatx_res) {
+ dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
+ return -ENXIO;
+ }
+
+ dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmarx_res) {
+ dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
+ return -ENXIO;
+ }
+
+ dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+ if (!dmamic_res) {
+ dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
+ return -ENXIO;
+ }
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res) {
+ dev_err(&pdev->dev, "Unable to get register resource\n");
+ return -ENXIO;
+ }
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq_res) {
+ dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
+ return -ENXIO;
+ }
+
+ if (!request_mem_region(mem_res->start,
+ resource_size(mem_res), "s3c-ac97")) {
+ dev_err(&pdev->dev, "Unable to request register region\n");
+ return -EBUSY;
+ }
+
+ s3c_ac97_pcm_out.channel = dmatx_res->start;
+ s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+ s3c_ac97_pcm_in.channel = dmarx_res->start;
+ s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+ s3c_ac97_mic_in.channel = dmamic_res->start;
+ s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
+
+ init_completion(&s3c_ac97.done);
+ mutex_init(&s3c_ac97.lock);
+
+ s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
+ if (s3c_ac97.regs == NULL) {
+ dev_err(&pdev->dev, "Unable to ioremap register region\n");
+ ret = -ENXIO;
+ goto err1;
+ }
+
+ s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
+ if (IS_ERR(s3c_ac97.ac97_clk)) {
+ dev_err(&pdev->dev, "s3c-ac97 failed to get ac97_clock\n");
+ ret = -ENODEV;
+ goto err2;
+ }
+ clk_enable(s3c_ac97.ac97_clk);
+
+ if (ac97_pdata->cfg_gpio(pdev)) {
+ dev_err(&pdev->dev, "Unable to configure gpio\n");
+ ret = -EINVAL;
+ goto err3;
+ }
+
+ ret = request_irq(irq_res->start, s3c_ac97_irq,
+ IRQF_DISABLED, "AC97", NULL);
+ if (ret < 0) {
+ printk(KERN_ERR "s3c-ac97: interrupt request failed.\n");
+ goto err4;
+ }
+
+ s3c_ac97_dai[S3C_AC97_DAI_PCM].dev = &pdev->dev;
+ s3c_ac97_dai[S3C_AC97_DAI_MIC].dev = &pdev->dev;
+
+ ret = snd_soc_register_dais(s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai));
+ if (ret)
+ goto err5;
+
+ return 0;
+
+err5:
+ free_irq(irq_res->start, NULL);
+err4:
+err3:
+ clk_disable(s3c_ac97.ac97_clk);
+ clk_put(s3c_ac97.ac97_clk);
+err2:
+ iounmap(s3c_ac97.regs);
+err1:
+ release_mem_region(mem_res->start, resource_size(mem_res));
+
+ return ret;
+}
+
+static __devexit int s3c_ac97_remove(struct platform_device *pdev)
+{
+ struct resource *mem_res, *irq_res;
+
+ snd_soc_unregister_dais(s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai));
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res)
+ free_irq(irq_res->start, NULL);
+
+ clk_disable(s3c_ac97.ac97_clk);
+ clk_put(s3c_ac97.ac97_clk);
+
+ iounmap(s3c_ac97.regs);
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (mem_res)
+ release_mem_region(mem_res->start, resource_size(mem_res));
+
+ return 0;
+}
+
+static struct platform_driver s3c_ac97_driver = {
+ .probe = s3c_ac97_probe,
+ .remove = s3c_ac97_remove,
+ .driver = {
+ .name = "s3c-ac97",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c_ac97_init(void)
+{
+ return platform_driver_register(&s3c_ac97_driver);
+}
+module_init(s3c_ac97_init);
+
+static void __exit s3c_ac97_exit(void)
+{
+ platform_driver_unregister(&s3c_ac97_driver);
+}
+module_exit(s3c_ac97_exit);
+
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-ac97.h b/sound/soc/s3c24xx/s3c-ac97.h
new file mode 100644
index 0000000..2781983
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-ac97.h
@@ -0,0 +1,23 @@
+/* sound/soc/s3c24xx/s3c-ac97.h
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ * Evolved from s3c2443-ac97.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C_AC97_H_
+#define __S3C_AC97_H_
+
+#define S3C_AC97_DAI_PCM 0
+#define S3C_AC97_DAI_MIC 1
+
+extern struct snd_soc_dai s3c_ac97_dai[];
+
+#endif /* __S3C_AC97_H_ */
diff --git a/sound/soc/s3c24xx/s3c-pcm.c b/sound/soc/s3c24xx/s3c-pcm.c
index 9e61a7c..a98f40c 100644
--- a/sound/soc/s3c24xx/s3c-pcm.c
+++ b/sound/soc/s3c24xx/s3c-pcm.c
@@ -229,8 +229,7 @@
spin_unlock_irqrestore(&pcm->lock, flags);
- dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs \
- SCLK_DIV=%d SYNC_DIV=%d\n",
+ dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
clk_get_rate(clk), pcm->sclk_per_fs,
sclk_div, sync_div);
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
deleted file mode 100644
index 0191e3a..0000000
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * s3c2443-ac97.c -- ALSA Soc Audio Layer
- *
- * (c) 2007 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright (C) 2005, Sean Choi <sh428.choi@samsung.com>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <plat/regs-ac97.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <asm/dma.h>
-#include <mach/dma.h>
-
-#include "s3c-dma.h"
-#include "s3c24xx-ac97.h"
-
-struct s3c24xx_ac97_info {
- void __iomem *regs;
- struct clk *ac97_clk;
-};
-static struct s3c24xx_ac97_info s3c24xx_ac97;
-
-static DECLARE_COMPLETION(ac97_completion);
-static u32 codec_ready;
-static DEFINE_MUTEX(ac97_mutex);
-
-static unsigned short s3c2443_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- u32 ac_glbctrl;
- u32 ac_codec_cmd;
- u32 stat, addr, data;
-
- mutex_lock(&ac97_mutex);
-
- codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
- ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
- ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
- writel(ac_codec_cmd, s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
-
- udelay(50);
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-
- wait_for_completion(&ac97_completion);
-
- stat = readl(s3c24xx_ac97.regs + S3C_AC97_STAT);
- addr = (stat >> 16) & 0x7f;
- data = (stat & 0xffff);
-
- if (addr != reg)
- printk(KERN_ERR "s3c24xx-ac97: req addr = %02x,"
- " rep addr = %02x\n", reg, addr);
-
- mutex_unlock(&ac97_mutex);
-
- return (unsigned short)data;
-}
-
-static void s3c2443_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- u32 ac_glbctrl;
- u32 ac_codec_cmd;
-
- mutex_lock(&ac97_mutex);
-
- codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
- ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
- ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
- writel(ac_codec_cmd, s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
-
- udelay(50);
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-
- wait_for_completion(&ac97_completion);
-
- ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
- ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
- writel(ac_codec_cmd, s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
-
- mutex_unlock(&ac97_mutex);
-
-}
-
-static void s3c2443_ac97_warm_reset(struct snd_ac97 *ac97)
-{
- u32 ac_glbctrl;
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl = S3C_AC97_GLBCTRL_WARMRESET;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl = 0;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-}
-
-static void s3c2443_ac97_cold_reset(struct snd_ac97 *ac97)
-{
- u32 ac_glbctrl;
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl = S3C_AC97_GLBCTRL_COLDRESET;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl = 0;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA |
- S3C_AC97_GLBCTRL_PCMINTM_DMA | S3C_AC97_GLBCTRL_MICINTM_DMA;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-}
-
-static irqreturn_t s3c2443_ac97_irq(int irq, void *dev_id)
-{
- int status;
- u32 ac_glbctrl;
-
- status = readl(s3c24xx_ac97.regs + S3C_AC97_GLBSTAT) & codec_ready;
-
- if (status) {
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- complete(&ac97_completion);
- }
- return IRQ_HANDLED;
-}
-
-struct snd_ac97_bus_ops soc_ac97_ops = {
- .read = s3c2443_ac97_read,
- .write = s3c2443_ac97_write,
- .warm_reset = s3c2443_ac97_warm_reset,
- .reset = s3c2443_ac97_cold_reset,
-};
-
-static struct s3c2410_dma_client s3c2443_dma_client_out = {
- .name = "AC97 PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c2443_dma_client_in = {
- .name = "AC97 PCM Stereo in"
-};
-
-static struct s3c2410_dma_client s3c2443_dma_client_micin = {
- .name = "AC97 Mic Mono in"
-};
-
-static struct s3c_dma_params s3c2443_ac97_pcm_stereo_out = {
- .client = &s3c2443_dma_client_out,
- .channel = DMACH_PCM_OUT,
- .dma_addr = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
- .dma_size = 4,
-};
-
-static struct s3c_dma_params s3c2443_ac97_pcm_stereo_in = {
- .client = &s3c2443_dma_client_in,
- .channel = DMACH_PCM_IN,
- .dma_addr = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
- .dma_size = 4,
-};
-
-static struct s3c_dma_params s3c2443_ac97_mic_mono_in = {
- .client = &s3c2443_dma_client_micin,
- .channel = DMACH_MIC_IN,
- .dma_addr = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
- .dma_size = 4,
-};
-
-static int s3c2443_ac97_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- int ret;
- u32 ac_glbctrl;
-
- s3c24xx_ac97.regs = ioremap(S3C2440_PA_AC97, 0x100);
- if (s3c24xx_ac97.regs == NULL)
- return -ENXIO;
-
- s3c24xx_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
- if (s3c24xx_ac97.ac97_clk == NULL) {
- printk(KERN_ERR "s3c2443-ac97 failed to get ac97_clock\n");
- iounmap(s3c24xx_ac97.regs);
- return -ENODEV;
- }
- clk_enable(s3c24xx_ac97.ac97_clk);
-
- s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2443_GPE0_AC_nRESET);
- s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2443_GPE1_AC_SYNC);
- s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2443_GPE2_AC_BITCLK);
- s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2443_GPE3_AC_SDI);
- s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2443_GPE4_AC_SDO);
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl = S3C_AC97_GLBCTRL_COLDRESET;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl = 0;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- msleep(1);
-
- ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-
- ret = request_irq(IRQ_S3C244x_AC97, s3c2443_ac97_irq,
- IRQF_DISABLED, "AC97", NULL);
- if (ret < 0) {
- printk(KERN_ERR "s3c24xx-ac97: interrupt request failed.\n");
- clk_disable(s3c24xx_ac97.ac97_clk);
- clk_put(s3c24xx_ac97.ac97_clk);
- iounmap(s3c24xx_ac97.regs);
- }
- return ret;
-}
-
-static void s3c2443_ac97_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- free_irq(IRQ_S3C244x_AC97, NULL);
- clk_disable(s3c24xx_ac97.ac97_clk);
- clk_put(s3c24xx_ac97.ac97_clk);
- iounmap(s3c24xx_ac97.regs);
-}
-
-static int s3c2443_ac97_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- cpu_dai->dma_data = &s3c2443_ac97_pcm_stereo_out;
- else
- cpu_dai->dma_data = &s3c2443_ac97_pcm_stereo_in;
-
- return 0;
-}
-
-static int s3c2443_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- u32 ac_glbctrl;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
- else
- ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
- else
- ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
- break;
- }
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
-
- return 0;
-}
-
-static int s3c2443_ac97_hw_mic_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- return -ENODEV;
- else
- cpu_dai->dma_data = &s3c2443_ac97_mic_mono_in;
-
- return 0;
-}
-
-static int s3c2443_ac97_mic_trigger(struct snd_pcm_substream *substream,
- int cmd, struct snd_soc_dai *dai)
-{
- u32 ac_glbctrl;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
-
- ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
- }
- writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
-
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
-
- return 0;
-}
-
-#define s3c2443_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
- SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
- SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
-
-static struct snd_soc_dai_ops s3c2443_ac97_dai_ops = {
- .hw_params = s3c2443_ac97_hw_params,
- .trigger = s3c2443_ac97_trigger,
-};
-
-static struct snd_soc_dai_ops s3c2443_ac97_mic_dai_ops = {
- .hw_params = s3c2443_ac97_hw_mic_params,
- .trigger = s3c2443_ac97_mic_trigger,
-};
-
-struct snd_soc_dai s3c2443_ac97_dai[] = {
-{
- .name = "s3c2443-ac97",
- .id = 0,
- .ac97_control = 1,
- .probe = s3c2443_ac97_probe,
- .remove = s3c2443_ac97_remove,
- .playback = {
- .stream_name = "AC97 Playback",
- .channels_min = 2,
- .channels_max = 2,
- .rates = s3c2443_AC97_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .capture = {
- .stream_name = "AC97 Capture",
- .channels_min = 2,
- .channels_max = 2,
- .rates = s3c2443_AC97_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .ops = &s3c2443_ac97_dai_ops,
-},
-{
- .name = "pxa2xx-ac97-mic",
- .id = 1,
- .ac97_control = 1,
- .capture = {
- .stream_name = "AC97 Mic Capture",
- .channels_min = 1,
- .channels_max = 1,
- .rates = s3c2443_AC97_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .ops = &s3c2443_ac97_mic_dai_ops,
-},
-};
-EXPORT_SYMBOL_GPL(s3c2443_ac97_dai);
-EXPORT_SYMBOL_GPL(soc_ac97_ops);
-
-static int __init s3c2443_ac97_init(void)
-{
- return snd_soc_register_dais(s3c2443_ac97_dai,
- ARRAY_SIZE(s3c2443_ac97_dai));
-}
-module_init(s3c2443_ac97_init);
-
-static void __exit s3c2443_ac97_exit(void)
-{
- snd_soc_unregister_dais(s3c2443_ac97_dai,
- ARRAY_SIZE(s3c2443_ac97_dai));
-}
-module_exit(s3c2443_ac97_exit);
-
-
-MODULE_AUTHOR("Graeme Gregory");
-MODULE_DESCRIPTION("AC97 driver for the Samsung s3c2443 chip");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h
deleted file mode 100644
index e96f941..0000000
--- a/sound/soc/s3c24xx/s3c24xx-ac97.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * s3c24xx-ac97.c -- ALSA Soc Audio Layer
- *
- * (c) 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Revision history
- * 10th Nov 2006 Initial version.
- */
-
-#ifndef S3C24XXAC97_H_
-#define S3C24XXAC97_H_
-
-#define AC_CMD_ADDR(x) (x << 16)
-#define AC_CMD_DATA(x) (x & 0xffff)
-
-extern struct snd_soc_dai s3c2443_ac97_dai[];
-
-#endif /*S3C24XXAC97_H_*/
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index cc7edb5..93ed3aa 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -15,16 +15,10 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
-#include <linux/delay.h>
#include <linux/clk.h>
-#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
#include <sound/soc.h>
#include <plat/regs-s3c2412-iis.h>
@@ -38,6 +32,11 @@
#include "s3c-dma.h"
#include "s3c64xx-i2s.h"
+/* The value should be set to maximum of the total number
+ * of I2Sv3 controllers that any supported SoC has.
+ */
+#define MAX_I2SV3 2
+
static struct s3c2410_dma_client s3c64xx_dma_client_out = {
.name = "I2S PCM Stereo out"
};
@@ -46,37 +45,12 @@
.name = "I2S PCM Stereo in"
};
-static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_out[2] = {
- [0] = {
- .channel = DMACH_I2S0_OUT,
- .client = &s3c64xx_dma_client_out,
- .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISTXD,
- .dma_size = 4,
- },
- [1] = {
- .channel = DMACH_I2S1_OUT,
- .client = &s3c64xx_dma_client_out,
- .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISTXD,
- .dma_size = 4,
- },
-};
+static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_out[MAX_I2SV3];
+static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_in[MAX_I2SV3];
+static struct s3c_i2sv2_info s3c64xx_i2s[MAX_I2SV3];
-static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_in[2] = {
- [0] = {
- .channel = DMACH_I2S0_IN,
- .client = &s3c64xx_dma_client_in,
- .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISRXD,
- .dma_size = 4,
- },
- [1] = {
- .channel = DMACH_I2S1_IN,
- .client = &s3c64xx_dma_client_in,
- .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISRXD,
- .dma_size = 4,
- },
-};
-
-static struct s3c_i2sv2_info s3c64xx_i2s[2];
+struct snd_soc_dai s3c64xx_i2s_dai[MAX_I2SV3];
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
{
@@ -169,55 +143,13 @@
.set_sysclk = s3c64xx_i2s_set_sysclk,
};
-struct snd_soc_dai s3c64xx_i2s_dai[] = {
- {
- .name = "s3c64xx-i2s",
- .id = 0,
- .probe = s3c64xx_i2s_probe,
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = S3C64XX_I2S_RATES,
- .formats = S3C64XX_I2S_FMTS,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = S3C64XX_I2S_RATES,
- .formats = S3C64XX_I2S_FMTS,
- },
- .ops = &s3c64xx_i2s_dai_ops,
- .symmetric_rates = 1,
- },
- {
- .name = "s3c64xx-i2s",
- .id = 1,
- .probe = s3c64xx_i2s_probe,
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = S3C64XX_I2S_RATES,
- .formats = S3C64XX_I2S_FMTS,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = S3C64XX_I2S_RATES,
- .formats = S3C64XX_I2S_FMTS,
- },
- .ops = &s3c64xx_i2s_dai_ops,
- .symmetric_rates = 1,
- },
-};
-EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
-
static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev)
{
struct s3c_i2sv2_info *i2s;
struct snd_soc_dai *dai;
int ret;
- if (pdev->id >= ARRAY_SIZE(s3c64xx_i2s)) {
+ if (pdev->id >= MAX_I2SV3) {
dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
return -EINVAL;
}
@@ -225,10 +157,40 @@
i2s = &s3c64xx_i2s[pdev->id];
dai = &s3c64xx_i2s_dai[pdev->id];
dai->dev = &pdev->dev;
+ dai->name = "s3c64xx-i2s";
+ dai->id = pdev->id;
+ dai->symmetric_rates = 1;
+ dai->playback.channels_min = 2;
+ dai->playback.channels_max = 2;
+ dai->playback.rates = S3C64XX_I2S_RATES;
+ dai->playback.formats = S3C64XX_I2S_FMTS;
+ dai->capture.channels_min = 2;
+ dai->capture.channels_max = 2;
+ dai->capture.rates = S3C64XX_I2S_RATES;
+ dai->capture.formats = S3C64XX_I2S_FMTS;
+ dai->probe = s3c64xx_i2s_probe;
+ dai->ops = &s3c64xx_i2s_dai_ops;
i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
+ if (pdev->id == 0) {
+ i2s->dma_capture->channel = DMACH_I2S0_IN;
+ i2s->dma_capture->dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISRXD;
+ i2s->dma_playback->channel = DMACH_I2S0_OUT;
+ i2s->dma_playback->dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISTXD;
+ } else {
+ i2s->dma_capture->channel = DMACH_I2S1_IN;
+ i2s->dma_capture->dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISRXD;
+ i2s->dma_playback->channel = DMACH_I2S1_OUT;
+ i2s->dma_playback->dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISTXD;
+ }
+
+ i2s->dma_capture->client = &s3c64xx_dma_client_in;
+ i2s->dma_capture->dma_size = 4;
+ i2s->dma_playback->client = &s3c64xx_dma_client_out;
+ i2s->dma_playback->dma_size = 4;
+
i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus");
if (IS_ERR(i2s->iis_cclk)) {
dev_err(&pdev->dev, "failed to get audio-bus\n");
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index 12b783b1..3622588 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -21,7 +21,7 @@
#include "../codecs/ac97.h"
#include "s3c-dma.h"
-#include "s3c24xx-ac97.h"
+#include "s3c-ac97.h"
static struct snd_soc_card smdk2443;
@@ -29,7 +29,7 @@
{
.name = "AC97",
.stream_name = "AC97 HiFi",
- .cpu_dai = &s3c2443_ac97_dai[0],
+ .cpu_dai = &s3c_ac97_dai[S3C_AC97_DAI_PCM],
.codec_dai = &ac97_dai,
},
};
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
new file mode 100644
index 0000000..24fd39f
--- /dev/null
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -0,0 +1,94 @@
+/*
+ * smdk_wm9713.c -- SoC audio for SMDK
+ *
+ * Copyright 2010 Samsung Electronics Co. Ltd.
+ * Author: Jaswinder Singh Brar <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/soc.h>
+
+#include "../codecs/wm9713.h"
+#include "s3c-dma.h"
+#include "s3c-ac97.h"
+
+static struct snd_soc_card smdk;
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ * SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off
+ */
+
+/*
+ Playback (HeadPhone):-
+ $ amixer sset 'Headphone' unmute
+ $ amixer sset 'Right Headphone Out Mux' 'Headphone'
+ $ amixer sset 'Left Headphone Out Mux' 'Headphone'
+ $ amixer sset 'Right HP Mixer PCM' unmute
+ $ amixer sset 'Left HP Mixer PCM' unmute
+
+ Capture (LineIn):-
+ $ amixer sset 'Right Capture Source' 'Line'
+ $ amixer sset 'Left Capture Source' 'Line'
+*/
+
+static struct snd_soc_dai_link smdk_dai = {
+ .name = "AC97",
+ .stream_name = "AC97 PCM",
+ .cpu_dai = &s3c_ac97_dai[S3C_AC97_DAI_PCM],
+ .codec_dai = &wm9713_dai[WM9713_DAI_AC97_HIFI],
+};
+
+static struct snd_soc_card smdk = {
+ .name = "SMDK",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &smdk_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device smdk_snd_ac97_devdata = {
+ .card = &smdk,
+ .codec_dev = &soc_codec_dev_wm9713,
+};
+
+static struct platform_device *smdk_snd_ac97_device;
+
+static int __init smdk_init(void)
+{
+ int ret;
+
+ smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+ if (!smdk_snd_ac97_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(smdk_snd_ac97_device,
+ &smdk_snd_ac97_devdata);
+ smdk_snd_ac97_devdata.dev = &smdk_snd_ac97_device->dev;
+
+ ret = platform_device_add(smdk_snd_ac97_device);
+ if (ret)
+ platform_device_put(smdk_snd_ac97_device);
+
+ return ret;
+}
+
+static void __exit smdk_exit(void)
+{
+ platform_device_unregister(smdk_snd_ac97_device);
+}
+
+module_init(smdk_init);
+module_exit(smdk_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh Brar, jassi.brar@samsung.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 9e69765..1066749 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -26,6 +26,13 @@
help
This option enables FSI sound support
+config SND_SOC_SH4_SIU
+ tristate
+ depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+ select DMA_ENGINE
+ select DMADEVICES
+ select SH_DMAE
+
##
## Boards
##
@@ -47,4 +54,20 @@
This option enables generic sound support for the
FSI - AK4642 unit
+config SND_FSI_DA7210
+ bool "FSI-DA7210 sound support"
+ depends on SND_SOC_SH4_FSI
+ select SND_SOC_DA7210
+ help
+ This option enables generic sound support for the
+ FSI - DA7210 unit
+
+config SND_SIU_MIGOR
+ tristate "SIU sound support on Migo-R"
+ depends on SH_MIGOR
+ select SND_SOC_SH4_SIU
+ select SND_SOC_WM8978
+ help
+ This option enables sound support for the SH7722 Migo-R board
+
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index a699787..8a5a192 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -6,13 +6,19 @@
snd-soc-hac-objs := hac.o
snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
+snd-soc-siu-objs := siu_pcm.o siu_dai.o
obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
+obj-$(CONFIG_SND_SOC_SH4_SIU) += snd-soc-siu.o
## boards
snd-soc-sh7760-ac97-objs := sh7760-ac97.o
snd-soc-fsi-ak4642-objs := fsi-ak4642.o
+snd-soc-fsi-da7210-objs := fsi-da7210.o
+snd-soc-migor-objs := migor.o
obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
obj-$(CONFIG_SND_FSI_AK4642) += snd-soc-fsi-ak4642.o
+obj-$(CONFIG_SND_FSI_DA7210) += snd-soc-fsi-da7210.o
+obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c
new file mode 100644
index 0000000..33b4d17
--- /dev/null
+++ b/sound/soc/sh/fsi-da7210.c
@@ -0,0 +1,83 @@
+/*
+ * fsi-da7210.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <sound/sh_fsi.h>
+#include "../codecs/da7210.h"
+
+static int fsi_da7210_init(struct snd_soc_codec *codec)
+{
+ return snd_soc_dai_set_fmt(&da7210_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+}
+
+static struct snd_soc_dai_link fsi_da7210_dai = {
+ .name = "DA7210",
+ .stream_name = "DA7210",
+ .cpu_dai = &fsi_soc_dai[1], /* FSI B */
+ .codec_dai = &da7210_dai,
+ .init = fsi_da7210_init,
+};
+
+static struct snd_soc_card fsi_soc_card = {
+ .name = "FSI",
+ .platform = &fsi_soc_platform,
+ .dai_link = &fsi_da7210_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device fsi_da7210_snd_devdata = {
+ .card = &fsi_soc_card,
+ .codec_dev = &soc_codec_dev_da7210,
+};
+
+static struct platform_device *fsi_da7210_snd_device;
+
+static int __init fsi_da7210_sound_init(void)
+{
+ int ret;
+
+ fsi_da7210_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!fsi_da7210_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(fsi_da7210_snd_device, &fsi_da7210_snd_devdata);
+ fsi_da7210_snd_devdata.dev = &fsi_da7210_snd_device->dev;
+ ret = platform_device_add(fsi_da7210_snd_device);
+ if (ret)
+ platform_device_put(fsi_da7210_snd_device);
+
+ return ret;
+}
+
+static void __exit fsi_da7210_sound_exit(void)
+{
+ platform_device_unregister(fsi_da7210_snd_device);
+}
+
+module_init(fsi_da7210_sound_init);
+module_exit(fsi_da7210_sound_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("ALSA SoC FSI DA2710");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 42813b8..993abb7 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -67,6 +67,7 @@
/* DOFF_ST */
#define ERR_OVER 0x00000010
#define ERR_UNDER 0x00000001
+#define ST_ERR (ERR_OVER | ERR_UNDER)
/* CLK_RST */
#define B_CLK 0x00000010
@@ -92,6 +93,7 @@
struct fsi_priv {
void __iomem *base;
struct snd_pcm_substream *substream;
+ struct fsi_master *master;
int fifo_max;
int chan;
@@ -108,10 +110,9 @@
struct fsi_priv fsia;
struct fsi_priv fsib;
struct sh_fsi_platform_info *info;
+ spinlock_t lock;
};
-static struct fsi_master *master;
-
/************************************************************************
@@ -119,35 +120,35 @@
************************************************************************/
-static int __fsi_reg_write(u32 reg, u32 data)
+static void __fsi_reg_write(u32 reg, u32 data)
{
/* valid data area is 24bit */
data &= 0x00ffffff;
- return ctrl_outl(data, reg);
+ __raw_writel(data, reg);
}
static u32 __fsi_reg_read(u32 reg)
{
- return ctrl_inl(reg);
+ return __raw_readl(reg);
}
-static int __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
+static void __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
{
u32 val = __fsi_reg_read(reg);
val &= ~mask;
val |= data & mask;
- return __fsi_reg_write(reg, val);
+ __fsi_reg_write(reg, val);
}
-static int fsi_reg_write(struct fsi_priv *fsi, u32 reg, u32 data)
+static void fsi_reg_write(struct fsi_priv *fsi, u32 reg, u32 data)
{
if (reg > REG_END)
- return -1;
+ return;
- return __fsi_reg_write((u32)(fsi->base + reg), data);
+ __fsi_reg_write((u32)(fsi->base + reg), data);
}
static u32 fsi_reg_read(struct fsi_priv *fsi, u32 reg)
@@ -158,39 +159,55 @@
return __fsi_reg_read((u32)(fsi->base + reg));
}
-static int fsi_reg_mask_set(struct fsi_priv *fsi, u32 reg, u32 mask, u32 data)
+static void fsi_reg_mask_set(struct fsi_priv *fsi, u32 reg, u32 mask, u32 data)
{
if (reg > REG_END)
- return -1;
+ return;
- return __fsi_reg_mask_set((u32)(fsi->base + reg), mask, data);
+ __fsi_reg_mask_set((u32)(fsi->base + reg), mask, data);
}
-static int fsi_master_write(u32 reg, u32 data)
+static void fsi_master_write(struct fsi_master *master, u32 reg, u32 data)
{
+ unsigned long flags;
+
if ((reg < MREG_START) ||
(reg > MREG_END))
- return -1;
+ return;
- return __fsi_reg_write((u32)(master->base + reg), data);
+ spin_lock_irqsave(&master->lock, flags);
+ __fsi_reg_write((u32)(master->base + reg), data);
+ spin_unlock_irqrestore(&master->lock, flags);
}
-static u32 fsi_master_read(u32 reg)
+static u32 fsi_master_read(struct fsi_master *master, u32 reg)
{
+ u32 ret;
+ unsigned long flags;
+
if ((reg < MREG_START) ||
(reg > MREG_END))
return 0;
- return __fsi_reg_read((u32)(master->base + reg));
+ spin_lock_irqsave(&master->lock, flags);
+ ret = __fsi_reg_read((u32)(master->base + reg));
+ spin_unlock_irqrestore(&master->lock, flags);
+
+ return ret;
}
-static int fsi_master_mask_set(u32 reg, u32 mask, u32 data)
+static void fsi_master_mask_set(struct fsi_master *master,
+ u32 reg, u32 mask, u32 data)
{
+ unsigned long flags;
+
if ((reg < MREG_START) ||
(reg > MREG_END))
- return -1;
+ return;
- return __fsi_reg_mask_set((u32)(master->base + reg), mask, data);
+ spin_lock_irqsave(&master->lock, flags);
+ __fsi_reg_mask_set((u32)(master->base + reg), mask, data);
+ spin_unlock_irqrestore(&master->lock, flags);
}
/************************************************************************
@@ -200,43 +217,35 @@
************************************************************************/
-static struct fsi_priv *fsi_get(struct snd_pcm_substream *substream)
+static struct fsi_master *fsi_get_master(struct fsi_priv *fsi)
{
- struct snd_soc_pcm_runtime *rtd;
- struct fsi_priv *fsi = NULL;
-
- if (!substream || !master)
- return NULL;
-
- rtd = substream->private_data;
- switch (rtd->dai->cpu_dai->id) {
- case 0:
- fsi = &master->fsia;
- break;
- case 1:
- fsi = &master->fsib;
- break;
- }
-
- return fsi;
+ return fsi->master;
}
static int fsi_is_port_a(struct fsi_priv *fsi)
{
- /* return
- * 1 : port a
- * 0 : port b
- */
+ return fsi->master->base == fsi->base;
+}
- if (fsi == &master->fsia)
- return 1;
+static struct snd_soc_dai *fsi_get_dai(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai_link *machine = rtd->dai;
- return 0;
+ return machine->cpu_dai;
+}
+
+static struct fsi_priv *fsi_get_priv(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_dai *dai = fsi_get_dai(substream);
+
+ return dai->private_data;
}
static u32 fsi_get_info_flags(struct fsi_priv *fsi)
{
int is_porta = fsi_is_port_a(fsi);
+ struct fsi_master *master = fsi_get_master(fsi);
return is_porta ? master->info->porta_flags :
master->info->portb_flags;
@@ -314,27 +323,30 @@
static void fsi_irq_enable(struct fsi_priv *fsi, int is_play)
{
u32 data = fsi_port_ab_io_bit(fsi, is_play);
+ struct fsi_master *master = fsi_get_master(fsi);
- fsi_master_mask_set(IMSK, data, data);
- fsi_master_mask_set(IEMSK, data, data);
+ fsi_master_mask_set(master, IMSK, data, data);
+ fsi_master_mask_set(master, IEMSK, data, data);
}
static void fsi_irq_disable(struct fsi_priv *fsi, int is_play)
{
u32 data = fsi_port_ab_io_bit(fsi, is_play);
+ struct fsi_master *master = fsi_get_master(fsi);
- fsi_master_mask_set(IMSK, data, 0);
- fsi_master_mask_set(IEMSK, data, 0);
+ fsi_master_mask_set(master, IMSK, data, 0);
+ fsi_master_mask_set(master, IEMSK, data, 0);
}
static void fsi_clk_ctrl(struct fsi_priv *fsi, int enable)
{
u32 val = fsi_is_port_a(fsi) ? (1 << 0) : (1 << 4);
+ struct fsi_master *master = fsi_get_master(fsi);
if (enable)
- fsi_master_mask_set(CLK_RST, val, val);
+ fsi_master_mask_set(master, CLK_RST, val, val);
else
- fsi_master_mask_set(CLK_RST, val, 0);
+ fsi_master_mask_set(master, CLK_RST, val, 0);
}
static void fsi_irq_init(struct fsi_priv *fsi, int is_play)
@@ -355,43 +367,46 @@
fsi_reg_mask_set(fsi, ctrl, FIFO_CLR, FIFO_CLR);
/* clear interrupt factor */
- fsi_master_mask_set(INT_ST, data, 0);
+ fsi_master_mask_set(fsi_get_master(fsi), INT_ST, data, 0);
}
-static void fsi_soft_all_reset(void)
+static void fsi_soft_all_reset(struct fsi_master *master)
{
- u32 status = fsi_master_read(SOFT_RST);
+ u32 status = fsi_master_read(master, SOFT_RST);
/* port AB reset */
status &= 0x000000ff;
- fsi_master_write(SOFT_RST, status);
+ fsi_master_write(master, SOFT_RST, status);
mdelay(10);
/* soft reset */
status &= 0x000000f0;
- fsi_master_write(SOFT_RST, status);
+ fsi_master_write(master, SOFT_RST, status);
status |= 0x00000001;
- fsi_master_write(SOFT_RST, status);
+ fsi_master_write(master, SOFT_RST, status);
mdelay(10);
}
/* playback interrupt */
-static int fsi_data_push(struct fsi_priv *fsi)
+static int fsi_data_push(struct fsi_priv *fsi, int startup)
{
struct snd_pcm_runtime *runtime;
struct snd_pcm_substream *substream = NULL;
+ u32 status;
int send;
int fifo_free;
int width;
u8 *start;
- int i;
+ int i, over_period;
if (!fsi ||
!fsi->substream ||
!fsi->substream->runtime)
return -EINVAL;
- runtime = fsi->substream->runtime;
+ over_period = 0;
+ substream = fsi->substream;
+ runtime = substream->runtime;
/* FSI FIFO has limit.
* So, this driver can not send periods data at a time
@@ -399,7 +414,7 @@
if (fsi->byte_offset >=
fsi->period_len * (fsi->periods + 1)) {
- substream = fsi->substream;
+ over_period = 1;
fsi->periods = (fsi->periods + 1) % runtime->periods;
if (0 == fsi->periods)
@@ -438,30 +453,44 @@
fsi->byte_offset += send * width;
+ status = fsi_reg_read(fsi, DOFF_ST);
+ if (!startup) {
+ struct snd_soc_dai *dai = fsi_get_dai(substream);
+
+ if (status & ERR_OVER)
+ dev_err(dai->dev, "over run\n");
+ if (status & ERR_UNDER)
+ dev_err(dai->dev, "under run\n");
+ }
+ fsi_reg_write(fsi, DOFF_ST, 0);
+
fsi_irq_enable(fsi, 1);
- if (substream)
+ if (over_period)
snd_pcm_period_elapsed(substream);
return 0;
}
-static int fsi_data_pop(struct fsi_priv *fsi)
+static int fsi_data_pop(struct fsi_priv *fsi, int startup)
{
struct snd_pcm_runtime *runtime;
struct snd_pcm_substream *substream = NULL;
+ u32 status;
int free;
int fifo_fill;
int width;
u8 *start;
- int i;
+ int i, over_period;
if (!fsi ||
!fsi->substream ||
!fsi->substream->runtime)
return -EINVAL;
- runtime = fsi->substream->runtime;
+ over_period = 0;
+ substream = fsi->substream;
+ runtime = substream->runtime;
/* FSI FIFO has limit.
* So, this driver can not send periods data at a time
@@ -469,7 +498,7 @@
if (fsi->byte_offset >=
fsi->period_len * (fsi->periods + 1)) {
- substream = fsi->substream;
+ over_period = 1;
fsi->periods = (fsi->periods + 1) % runtime->periods;
if (0 == fsi->periods)
@@ -507,9 +536,20 @@
fsi->byte_offset += fifo_fill * width;
+ status = fsi_reg_read(fsi, DIFF_ST);
+ if (!startup) {
+ struct snd_soc_dai *dai = fsi_get_dai(substream);
+
+ if (status & ERR_OVER)
+ dev_err(dai->dev, "over run\n");
+ if (status & ERR_UNDER)
+ dev_err(dai->dev, "under run\n");
+ }
+ fsi_reg_write(fsi, DIFF_ST, 0);
+
fsi_irq_enable(fsi, 0);
- if (substream)
+ if (over_period)
snd_pcm_period_elapsed(substream);
return 0;
@@ -517,23 +557,24 @@
static irqreturn_t fsi_interrupt(int irq, void *data)
{
- u32 status = fsi_master_read(SOFT_RST) & ~0x00000010;
- u32 int_st = fsi_master_read(INT_ST);
+ struct fsi_master *master = data;
+ u32 status = fsi_master_read(master, SOFT_RST) & ~0x00000010;
+ u32 int_st = fsi_master_read(master, INT_ST);
/* clear irq status */
- fsi_master_write(SOFT_RST, status);
- fsi_master_write(SOFT_RST, status | 0x00000010);
+ fsi_master_write(master, SOFT_RST, status);
+ fsi_master_write(master, SOFT_RST, status | 0x00000010);
if (int_st & INT_A_OUT)
- fsi_data_push(&master->fsia);
+ fsi_data_push(&master->fsia, 0);
if (int_st & INT_B_OUT)
- fsi_data_push(&master->fsib);
+ fsi_data_push(&master->fsib, 0);
if (int_st & INT_A_IN)
- fsi_data_pop(&master->fsia);
+ fsi_data_pop(&master->fsia, 0);
if (int_st & INT_B_IN)
- fsi_data_pop(&master->fsib);
+ fsi_data_pop(&master->fsib, 0);
- fsi_master_write(INT_ST, 0x0000000);
+ fsi_master_write(master, INT_ST, 0x0000000);
return IRQ_HANDLED;
}
@@ -548,7 +589,7 @@
static int fsi_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct fsi_priv *fsi = fsi_get(substream);
+ struct fsi_priv *fsi = fsi_get_priv(substream);
const char *msg;
u32 flags = fsi_get_info_flags(fsi);
u32 fmt;
@@ -667,7 +708,7 @@
static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct fsi_priv *fsi = fsi_get(substream);
+ struct fsi_priv *fsi = fsi_get_priv(substream);
int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
fsi_irq_disable(fsi, is_play);
@@ -679,7 +720,7 @@
static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
- struct fsi_priv *fsi = fsi_get(substream);
+ struct fsi_priv *fsi = fsi_get_priv(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
int ret = 0;
@@ -689,7 +730,7 @@
fsi_stream_push(fsi, substream,
frames_to_bytes(runtime, runtime->buffer_size),
frames_to_bytes(runtime, runtime->period_size));
- ret = is_play ? fsi_data_push(fsi) : fsi_data_pop(fsi);
+ ret = is_play ? fsi_data_push(fsi, 1) : fsi_data_pop(fsi, 1);
break;
case SNDRV_PCM_TRIGGER_STOP:
fsi_irq_disable(fsi, is_play);
@@ -760,7 +801,7 @@
static snd_pcm_uframes_t fsi_pointer(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct fsi_priv *fsi = fsi_get(substream);
+ struct fsi_priv *fsi = fsi_get_priv(substream);
long location;
location = (fsi->byte_offset - 1);
@@ -870,10 +911,16 @@
************************************************************************/
static int fsi_probe(struct platform_device *pdev)
{
+ struct fsi_master *master;
struct resource *res;
unsigned int irq;
int ret;
+ if (0 != pdev->id) {
+ dev_err(&pdev->dev, "current fsi support id 0 only now\n");
+ return -ENODEV;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!res || (int)irq <= 0) {
@@ -899,15 +946,20 @@
master->irq = irq;
master->info = pdev->dev.platform_data;
master->fsia.base = master->base;
+ master->fsia.master = master;
master->fsib.base = master->base + 0x40;
+ master->fsib.master = master;
+ spin_lock_init(&master->lock);
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
fsi_soc_dai[0].dev = &pdev->dev;
+ fsi_soc_dai[0].private_data = &master->fsia;
fsi_soc_dai[1].dev = &pdev->dev;
+ fsi_soc_dai[1].private_data = &master->fsib;
- fsi_soft_all_reset();
+ fsi_soft_all_reset(master);
ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED, "fsi", master);
if (ret) {
@@ -937,6 +989,10 @@
static int fsi_remove(struct platform_device *pdev)
{
+ struct fsi_master *master;
+
+ master = fsi_get_master(fsi_soc_dai[0].private_data);
+
snd_soc_unregister_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
snd_soc_unregister_platform(&fsi_soc_platform);
@@ -946,7 +1002,12 @@
iounmap(master->base);
kfree(master);
- master = NULL;
+
+ fsi_soc_dai[0].dev = NULL;
+ fsi_soc_dai[0].private_data = NULL;
+ fsi_soc_dai[1].dev = NULL;
+ fsi_soc_dai[1].private_data = NULL;
+
return 0;
}
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
new file mode 100644
index 0000000..b823a5c
--- /dev/null
+++ b/sound/soc/sh/migor.c
@@ -0,0 +1,218 @@
+/*
+ * ALSA SoC driver for Migo-R
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+
+#include <asm/clock.h>
+
+#include <cpu/sh7722.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8978.h"
+#include "siu.h"
+
+/* Default 8000Hz sampling frequency */
+static unsigned long codec_freq = 8000 * 512;
+
+static unsigned int use_count;
+
+/* External clock, sourced from the codec at the SIUMCKB pin */
+static unsigned long siumckb_recalc(struct clk *clk)
+{
+ return codec_freq;
+}
+
+static struct clk_ops siumckb_clk_ops = {
+ .recalc = siumckb_recalc,
+};
+
+static struct clk siumckb_clk = {
+ .name = "siumckb_clk",
+ .id = -1,
+ .ops = &siumckb_clk_ops,
+ .rate = 0, /* initialised at run-time */
+};
+
+static int migor_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret;
+ unsigned int rate = params_rate(params);
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(rtd->dai->cpu_dai, SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ codec_freq = rate * 512;
+ /*
+ * This propagates the parent frequency change to children and
+ * recalculates the frequency table
+ */
+ clk_set_rate(&siumckb_clk, codec_freq);
+ dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
+
+ ret = snd_soc_dai_set_sysclk(rtd->dai->cpu_dai, SIU_CLKB_EXT,
+ codec_freq / 2, SND_SOC_CLOCK_IN);
+
+ if (!ret)
+ use_count++;
+
+ return ret;
+}
+
+static int migor_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ if (use_count) {
+ use_count--;
+
+ if (!use_count)
+ snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
+ SND_SOC_CLOCK_IN);
+ } else {
+ dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops migor_dai_ops = {
+ .hw_params = migor_hw_params,
+ .hw_free = migor_hw_free,
+};
+
+static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
+ SND_SOC_DAPM_MIC("External Microphone", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
+ { "Headphone", NULL, "OUT4 VMID" },
+ { "OUT4 VMID", NULL, "LHP" },
+ { "OUT4 VMID", NULL, "RHP" },
+
+ /* On-board microphone */
+ { "RMICN", NULL, "Mic Bias" },
+ { "RMICP", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "Onboard Microphone" },
+
+ /* External microphone */
+ { "LMICN", NULL, "Mic Bias" },
+ { "LMICP", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "External Microphone" },
+};
+
+static int migor_dai_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, migor_dapm_widgets,
+ ARRAY_SIZE(migor_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ return 0;
+}
+
+/* migor digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link migor_dai = {
+ .name = "wm8978",
+ .stream_name = "WM8978",
+ .cpu_dai = &siu_i2s_dai,
+ .codec_dai = &wm8978_dai,
+ .ops = &migor_dai_ops,
+ .init = migor_dai_init,
+};
+
+/* migor audio machine driver */
+static struct snd_soc_card snd_soc_migor = {
+ .name = "Migo-R",
+ .platform = &siu_platform,
+ .dai_link = &migor_dai,
+ .num_links = 1,
+};
+
+/* migor audio subsystem */
+static struct snd_soc_device migor_snd_devdata = {
+ .card = &snd_soc_migor,
+ .codec_dev = &soc_codec_dev_wm8978,
+};
+
+static struct platform_device *migor_snd_device;
+
+static int __init migor_init(void)
+{
+ int ret;
+
+ ret = clk_register(&siumckb_clk);
+ if (ret < 0)
+ return ret;
+
+ /* Port number used on this machine: port B */
+ migor_snd_device = platform_device_alloc("soc-audio", 1);
+ if (!migor_snd_device) {
+ ret = -ENOMEM;
+ goto epdevalloc;
+ }
+
+ platform_set_drvdata(migor_snd_device, &migor_snd_devdata);
+
+ migor_snd_devdata.dev = &migor_snd_device->dev;
+
+ ret = platform_device_add(migor_snd_device);
+ if (ret)
+ goto epdevadd;
+
+ return 0;
+
+epdevadd:
+ platform_device_put(migor_snd_device);
+epdevalloc:
+ clk_unregister(&siumckb_clk);
+ return ret;
+}
+
+static void __exit migor_exit(void)
+{
+ clk_unregister(&siumckb_clk);
+ platform_device_unregister(migor_snd_device);
+}
+
+module_init(migor_init);
+module_exit(migor_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("ALSA SoC Migor");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
new file mode 100644
index 0000000..9cc04ab
--- /dev/null
+++ b/sound/soc/sh/siu.h
@@ -0,0 +1,193 @@
+/*
+ * siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SIU_H
+#define SIU_H
+
+/* Common kernel and user-space firmware-building defines and types */
+
+#define YRAM0_SIZE (0x0040 / 4) /* 16 */
+#define YRAM1_SIZE (0x0080 / 4) /* 32 */
+#define YRAM2_SIZE (0x0040 / 4) /* 16 */
+#define YRAM3_SIZE (0x0080 / 4) /* 32 */
+#define YRAM4_SIZE (0x0080 / 4) /* 32 */
+#define YRAM_DEF_SIZE (YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
+ YRAM3_SIZE + YRAM4_SIZE)
+#define YRAM_FIR_SIZE (0x0400 / 4) /* 256 */
+#define YRAM_IIR_SIZE (0x0200 / 4) /* 128 */
+
+#define XRAM0_SIZE (0x0400 / 4) /* 256 */
+#define XRAM1_SIZE (0x0200 / 4) /* 128 */
+#define XRAM2_SIZE (0x0200 / 4) /* 128 */
+
+/* PRAM program array size */
+#define PRAM0_SIZE (0x0100 / 4) /* 64 */
+#define PRAM1_SIZE ((0x2000 - 0x0100) / 4) /* 1984 */
+
+#include <linux/types.h>
+
+struct siu_spb_param {
+ __u32 ab1a; /* input FIFO address */
+ __u32 ab0a; /* output FIFO address */
+ __u32 dir; /* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
+ __u32 event; /* SPB program starting conditions */
+ __u32 stfifo; /* STFIFO register setting value */
+ __u32 trdat; /* TRDAT register setting value */
+};
+
+struct siu_firmware {
+ __u32 yram_fir_coeff[YRAM_FIR_SIZE];
+ __u32 pram0[PRAM0_SIZE];
+ __u32 pram1[PRAM1_SIZE];
+ __u32 yram0[YRAM0_SIZE];
+ __u32 yram1[YRAM1_SIZE];
+ __u32 yram2[YRAM2_SIZE];
+ __u32 yram3[YRAM3_SIZE];
+ __u32 yram4[YRAM4_SIZE];
+ __u32 spbpar_num;
+ struct siu_spb_param spbpar[32];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/dma-sh.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc-dai.h>
+
+#define SIU_PERIOD_BYTES_MAX 8192 /* DMA transfer/period size */
+#define SIU_PERIOD_BYTES_MIN 256 /* DMA transfer/period size */
+#define SIU_PERIODS_MAX 64 /* Max periods in buffer */
+#define SIU_PERIODS_MIN 4 /* Min periods in buffer */
+#define SIU_BUFFER_BYTES_MAX (SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
+
+/* SIU ports: only one can be used at a time */
+enum {
+ SIU_PORT_A,
+ SIU_PORT_B,
+ SIU_PORT_NUM,
+};
+
+/* SIU clock configuration */
+enum {
+ SIU_CLKA_PLL,
+ SIU_CLKA_EXT,
+ SIU_CLKB_PLL,
+ SIU_CLKB_EXT
+};
+
+struct siu_info {
+ int port_id;
+ u32 __iomem *pram;
+ u32 __iomem *xram;
+ u32 __iomem *yram;
+ u32 __iomem *reg;
+ struct siu_firmware fw;
+};
+
+struct siu_stream {
+ struct tasklet_struct tasklet;
+ struct snd_pcm_substream *substream;
+ snd_pcm_format_t format;
+ size_t buf_bytes;
+ size_t period_bytes;
+ int cur_period; /* Period currently in dma */
+ u32 volume;
+ snd_pcm_sframes_t xfer_cnt; /* Number of frames */
+ u8 rw_flg; /* transfer status */
+ /* DMA status */
+ struct dma_chan *chan; /* DMA channel */
+ struct dma_async_tx_descriptor *tx_desc;
+ dma_cookie_t cookie;
+ struct sh_dmae_slave param;
+};
+
+struct siu_port {
+ unsigned long play_cap; /* Used to track full duplex */
+ struct snd_pcm *pcm;
+ struct siu_stream playback;
+ struct siu_stream capture;
+ u32 stfifo; /* STFIFO value from firmware */
+ u32 trdat; /* TRDAT value from firmware */
+};
+
+extern struct siu_port *siu_ports[SIU_PORT_NUM];
+
+static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
+{
+ struct platform_device *pdev =
+ to_platform_device(substream->pcm->card->dev);
+ return siu_ports[pdev->id];
+}
+
+/* Register access */
+static inline void siu_write32(u32 __iomem *addr, u32 val)
+{
+ __raw_writel(val, addr);
+}
+
+static inline u32 siu_read32(u32 __iomem *addr)
+{
+ return __raw_readl(addr);
+}
+
+/* SIU registers */
+#define SIU_IFCTL (0x000 / sizeof(u32))
+#define SIU_SRCTL (0x004 / sizeof(u32))
+#define SIU_SFORM (0x008 / sizeof(u32))
+#define SIU_CKCTL (0x00c / sizeof(u32))
+#define SIU_TRDAT (0x010 / sizeof(u32))
+#define SIU_STFIFO (0x014 / sizeof(u32))
+#define SIU_DPAK (0x01c / sizeof(u32))
+#define SIU_CKREV (0x020 / sizeof(u32))
+#define SIU_EVNTC (0x028 / sizeof(u32))
+#define SIU_SBCTL (0x040 / sizeof(u32))
+#define SIU_SBPSET (0x044 / sizeof(u32))
+#define SIU_SBFSTS (0x068 / sizeof(u32))
+#define SIU_SBDVCA (0x06c / sizeof(u32))
+#define SIU_SBDVCB (0x070 / sizeof(u32))
+#define SIU_SBACTIV (0x074 / sizeof(u32))
+#define SIU_DMAIA (0x090 / sizeof(u32))
+#define SIU_DMAIB (0x094 / sizeof(u32))
+#define SIU_DMAOA (0x098 / sizeof(u32))
+#define SIU_DMAOB (0x09c / sizeof(u32))
+#define SIU_DMAML (0x0a0 / sizeof(u32))
+#define SIU_SPSTS (0x0cc / sizeof(u32))
+#define SIU_SPCTL (0x0d0 / sizeof(u32))
+#define SIU_BRGASEL (0x100 / sizeof(u32))
+#define SIU_BRRA (0x104 / sizeof(u32))
+#define SIU_BRGBSEL (0x108 / sizeof(u32))
+#define SIU_BRRB (0x10c / sizeof(u32))
+
+extern struct snd_soc_platform siu_platform;
+extern struct snd_soc_dai siu_i2s_dai;
+
+int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
+void siu_free_port(struct siu_port *port_info);
+
+#endif
+
+#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
new file mode 100644
index 0000000..5452d19
--- /dev/null
+++ b/sound/soc/sh/siu_dai.c
@@ -0,0 +1,847 @@
+/*
+ * siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/clock.h>
+#include <asm/siu.h>
+
+#include <sound/control.h>
+#include <sound/soc-dai.h>
+
+#include "siu.h"
+
+/* Board specifics */
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+# define SIU_MAX_VOLUME 0x1000
+#else
+# define SIU_MAX_VOLUME 0x7fff
+#endif
+
+#define PRAM_SIZE 0x2000
+#define XRAM_SIZE 0x800
+#define YRAM_SIZE 0x800
+
+#define XRAM_OFFSET 0x4000
+#define YRAM_OFFSET 0x6000
+#define REG_OFFSET 0xc000
+
+#define PLAYBACK_ENABLED 1
+#define CAPTURE_ENABLED 2
+
+#define VOLUME_CAPTURE 0
+#define VOLUME_PLAYBACK 1
+#define DFLT_VOLUME_LEVEL 0x08000800
+
+/*
+ * SPDIF is only available on port A and on some SIU implementations it is only
+ * available for input. Due to the lack of hardware to test it, SPDIF is left
+ * disabled in this driver version
+ */
+struct format_flag {
+ u32 i2s;
+ u32 pcm;
+ u32 spdif;
+ u32 mask;
+};
+
+struct port_flag {
+ struct format_flag playback;
+ struct format_flag capture;
+};
+
+static struct port_flag siu_flags[SIU_PORT_NUM] = {
+ [SIU_PORT_A] = {
+ .playback = {
+ .i2s = 0x50000000,
+ .pcm = 0x40000000,
+ .spdif = 0x80000000, /* not on all SIU versions */
+ .mask = 0xd0000000,
+ },
+ .capture = {
+ .i2s = 0x05000000,
+ .pcm = 0x04000000,
+ .spdif = 0x08000000,
+ .mask = 0x0d000000,
+ },
+ },
+ [SIU_PORT_B] = {
+ .playback = {
+ .i2s = 0x00500000,
+ .pcm = 0x00400000,
+ .spdif = 0, /* impossible - turn off */
+ .mask = 0x00500000,
+ },
+ .capture = {
+ .i2s = 0x00050000,
+ .pcm = 0x00040000,
+ .spdif = 0, /* impossible - turn off */
+ .mask = 0x00050000,
+ },
+ },
+};
+
+static void siu_dai_start(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+
+ dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
+
+ /* Turn on SIU clock */
+ pm_runtime_get_sync(siu_i2s_dai.dev);
+
+ /* Issue software reset to siu */
+ siu_write32(base + SIU_SRCTL, 0);
+
+ /* Wait for the reset to take effect */
+ udelay(1);
+
+ port_info->stfifo = 0;
+ port_info->trdat = 0;
+
+ /* portA, portB, SIU operate */
+ siu_write32(base + SIU_SRCTL, 0x301);
+
+ /* portA=256fs, portB=256fs */
+ siu_write32(base + SIU_CKCTL, 0x40400000);
+
+ /* portA's BRG does not divide SIUCKA */
+ siu_write32(base + SIU_BRGASEL, 0);
+ siu_write32(base + SIU_BRRA, 0);
+
+ /* portB's BRG divides SIUCKB by half */
+ siu_write32(base + SIU_BRGBSEL, 1);
+ siu_write32(base + SIU_BRRB, 0);
+
+ siu_write32(base + SIU_IFCTL, 0x44440000);
+
+ /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
+ siu_write32(base + SIU_SFORM, 0x0c0c0000);
+
+ /*
+ * Volume levels: looks like the DSP firmware implements volume controls
+ * differently from what's described in the datasheet
+ */
+ siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
+ siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
+}
+
+static void siu_dai_stop(void)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+
+ /* SIU software reset */
+ siu_write32(base + SIU_SRCTL, 0);
+
+ /* Turn off SIU clock */
+ pm_runtime_put_sync(siu_i2s_dai.dev);
+}
+
+static void siu_dai_spbAselect(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_firmware *fw = &info->fw;
+ u32 *ydef = fw->yram0;
+ u32 idx;
+
+ /* path A use */
+ if (!info->port_id)
+ idx = 1; /* portA */
+ else
+ idx = 2; /* portB */
+
+ ydef[0] = (fw->spbpar[idx].ab1a << 16) |
+ (fw->spbpar[idx].ab0a << 8) |
+ (fw->spbpar[idx].dir << 7) | 3;
+ ydef[1] = fw->yram0[1]; /* 0x03000300 */
+ ydef[2] = (16 / 2) << 24;
+ ydef[3] = fw->yram0[3]; /* 0 */
+ ydef[4] = fw->yram0[4]; /* 0 */
+ ydef[7] = fw->spbpar[idx].event;
+ port_info->stfifo |= fw->spbpar[idx].stfifo;
+ port_info->trdat |= fw->spbpar[idx].trdat;
+}
+
+static void siu_dai_spbBselect(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_firmware *fw = &info->fw;
+ u32 *ydef = fw->yram0;
+ u32 idx;
+
+ /* path B use */
+ if (!info->port_id)
+ idx = 7; /* portA */
+ else
+ idx = 8; /* portB */
+
+ ydef[5] = (fw->spbpar[idx].ab1a << 16) |
+ (fw->spbpar[idx].ab0a << 8) | 1;
+ ydef[6] = fw->spbpar[idx].event;
+ port_info->stfifo |= fw->spbpar[idx].stfifo;
+ port_info->trdat |= fw->spbpar[idx].trdat;
+}
+
+static void siu_dai_open(struct siu_stream *siu_stream)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ u32 srctl, ifctl;
+
+ srctl = siu_read32(base + SIU_SRCTL);
+ ifctl = siu_read32(base + SIU_IFCTL);
+
+ switch (info->port_id) {
+ case SIU_PORT_A:
+ /* portA operates */
+ srctl |= 0x200;
+ ifctl &= ~0xc2;
+ break;
+ case SIU_PORT_B:
+ /* portB operates */
+ srctl |= 0x100;
+ ifctl &= ~0x31;
+ break;
+ }
+
+ siu_write32(base + SIU_SRCTL, srctl);
+ /* Unmute and configure portA */
+ siu_write32(base + SIU_IFCTL, ifctl);
+}
+
+/*
+ * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
+ * packing is supported
+ */
+static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ u32 dpak;
+
+ dpak = siu_read32(base + SIU_DPAK);
+
+ switch (info->port_id) {
+ case SIU_PORT_A:
+ dpak &= ~0xc0000000;
+ break;
+ case SIU_PORT_B:
+ dpak &= ~0x00c00000;
+ break;
+ }
+
+ siu_write32(base + SIU_DPAK, dpak);
+}
+
+static int siu_dai_spbstart(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_firmware *fw = &info->fw;
+ u32 *ydef = fw->yram0;
+ int cnt;
+ u32 __iomem *add;
+ u32 *ptr;
+
+ /* Load SPB Program in PRAM */
+ ptr = fw->pram0;
+ add = info->pram;
+ for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
+ siu_write32(add, *ptr);
+
+ ptr = fw->pram1;
+ add = info->pram + (0x0100 / sizeof(u32));
+ for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
+ siu_write32(add, *ptr);
+
+ /* XRAM initialization */
+ add = info->xram;
+ for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
+ siu_write32(add, 0);
+
+ /* YRAM variable area initialization */
+ add = info->yram;
+ for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
+ siu_write32(add, ydef[cnt]);
+
+ /* YRAM FIR coefficient area initialization */
+ add = info->yram + (0x0200 / sizeof(u32));
+ for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
+ siu_write32(add, fw->yram_fir_coeff[cnt]);
+
+ /* YRAM IIR coefficient area initialization */
+ add = info->yram + (0x0600 / sizeof(u32));
+ for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
+ siu_write32(add, 0);
+
+ siu_write32(base + SIU_TRDAT, port_info->trdat);
+ port_info->trdat = 0x0;
+
+
+ /* SPB start condition: software */
+ siu_write32(base + SIU_SBACTIV, 0);
+ /* Start SPB */
+ siu_write32(base + SIU_SBCTL, 0xc0000000);
+ /* Wait for program to halt */
+ cnt = 0x10000;
+ while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
+ cpu_relax();
+
+ if (!cnt)
+ return -EBUSY;
+
+ /* SPB program start address setting */
+ siu_write32(base + SIU_SBPSET, 0x00400000);
+ /* SPB hardware start(FIFOCTL source) */
+ siu_write32(base + SIU_SBACTIV, 0xc0000000);
+
+ return 0;
+}
+
+static void siu_dai_spbstop(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+
+ siu_write32(base + SIU_SBACTIV, 0);
+ /* SPB stop */
+ siu_write32(base + SIU_SBCTL, 0);
+
+ port_info->stfifo = 0;
+}
+
+/* API functions */
+
+/* Playback and capture hardware properties are identical */
+static struct snd_pcm_hardware siu_dai_pcm_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED,
+ .formats = SNDRV_PCM_FMTBIT_S16,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
+ .period_bytes_min = SIU_PERIOD_BYTES_MIN,
+ .period_bytes_max = SIU_PERIOD_BYTES_MAX,
+ .periods_min = SIU_PERIODS_MIN,
+ .periods_max = SIU_PERIODS_MAX,
+};
+
+static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+
+ dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = SIU_MAX_VOLUME;
+
+ return 0;
+}
+
+static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+ struct device *dev = port_info->pcm->card->dev;
+ u32 vol;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ switch (kctrl->private_value) {
+ case VOLUME_PLAYBACK:
+ /* Playback is always on port 0 */
+ vol = port_info->playback.volume;
+ ucontrol->value.integer.value[0] = vol & 0xffff;
+ ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
+ break;
+ case VOLUME_CAPTURE:
+ /* Capture is always on port 1 */
+ vol = port_info->capture.volume;
+ ucontrol->value.integer.value[0] = vol & 0xffff;
+ ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
+ break;
+ default:
+ dev_err(dev, "%s() invalid private_value=%ld\n",
+ __func__, kctrl->private_value);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct siu_port *port_info = snd_kcontrol_chip(kctrl);
+ struct device *dev = port_info->pcm->card->dev;
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ u32 new_vol;
+ u32 cur_vol;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ if (ucontrol->value.integer.value[0] < 0 ||
+ ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
+ ucontrol->value.integer.value[1] < 0 ||
+ ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
+ return -EINVAL;
+
+ new_vol = ucontrol->value.integer.value[0] |
+ ucontrol->value.integer.value[1] << 16;
+
+ /* See comment above - DSP firmware implementation */
+ switch (kctrl->private_value) {
+ case VOLUME_PLAYBACK:
+ /* Playback is always on port 0 */
+ cur_vol = port_info->playback.volume;
+ siu_write32(base + SIU_SBDVCA, new_vol);
+ port_info->playback.volume = new_vol;
+ break;
+ case VOLUME_CAPTURE:
+ /* Capture is always on port 1 */
+ cur_vol = port_info->capture.volume;
+ siu_write32(base + SIU_SBDVCB, new_vol);
+ port_info->capture.volume = new_vol;
+ break;
+ default:
+ dev_err(dev, "%s() invalid private_value=%ld\n",
+ __func__, kctrl->private_value);
+ return -EINVAL;
+ }
+
+ if (cur_vol != new_vol)
+ return 1;
+
+ return 0;
+}
+
+static struct snd_kcontrol_new playback_controls = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .index = 0,
+ .info = siu_dai_info_volume,
+ .get = siu_dai_get_volume,
+ .put = siu_dai_put_volume,
+ .private_value = VOLUME_PLAYBACK,
+};
+
+static struct snd_kcontrol_new capture_controls = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Capture Volume",
+ .index = 0,
+ .info = siu_dai_info_volume,
+ .get = siu_dai_get_volume,
+ .put = siu_dai_put_volume,
+ .private_value = VOLUME_CAPTURE,
+};
+
+int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
+{
+ struct device *dev = card->dev;
+ struct snd_kcontrol *kctrl;
+ int ret;
+
+ *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
+ if (!*port_info)
+ return -ENOMEM;
+
+ dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
+
+ (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
+ (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
+
+ /*
+ * Add mixer support. The SPB is used to change the volume. Both
+ * ports use the same SPB. Therefore, we only register one
+ * control instance since it will be used by both channels.
+ * In error case we continue without controls.
+ */
+ kctrl = snd_ctl_new1(&playback_controls, *port_info);
+ ret = snd_ctl_add(card, kctrl);
+ if (ret < 0)
+ dev_err(dev,
+ "failed to add playback controls %p port=%d err=%d\n",
+ kctrl, port, ret);
+
+ kctrl = snd_ctl_new1(&capture_controls, *port_info);
+ ret = snd_ctl_add(card, kctrl);
+ if (ret < 0)
+ dev_err(dev,
+ "failed to add capture controls %p port=%d err=%d\n",
+ kctrl, port, ret);
+
+ return 0;
+}
+
+void siu_free_port(struct siu_port *port_info)
+{
+ kfree(port_info);
+}
+
+static int siu_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct siu_port *port_info = siu_port_info(substream);
+ int ret;
+
+ dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
+ info->port_id, port_info);
+
+ snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
+
+ ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
+ if (unlikely(ret < 0))
+ return ret;
+
+ siu_dai_start(port_info);
+
+ return 0;
+}
+
+static void siu_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_port *port_info = siu_port_info(substream);
+
+ dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
+ info->port_id, port_info);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ port_info->play_cap &= ~PLAYBACK_ENABLED;
+ else
+ port_info->play_cap &= ~CAPTURE_ENABLED;
+
+ /* Stop the siu if the other stream is not using it */
+ if (!port_info->play_cap) {
+ /* during stmread or stmwrite ? */
+ BUG_ON(port_info->playback.rw_flg || port_info->capture.rw_flg);
+ siu_dai_spbstop(port_info);
+ siu_dai_stop();
+ }
+}
+
+/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
+static int siu_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct siu_port *port_info = siu_port_info(substream);
+ struct siu_stream *siu_stream;
+ int self, ret;
+
+ dev_dbg(substream->pcm->card->dev,
+ "%s: port %d, active streams %lx, %d channels\n",
+ __func__, info->port_id, port_info->play_cap, rt->channels);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ self = PLAYBACK_ENABLED;
+ siu_stream = &port_info->playback;
+ } else {
+ self = CAPTURE_ENABLED;
+ siu_stream = &port_info->capture;
+ }
+
+ /* Set up the siu if not already done */
+ if (!port_info->play_cap) {
+ siu_stream->rw_flg = 0; /* stream-data transfer flag */
+
+ siu_dai_spbAselect(port_info);
+ siu_dai_spbBselect(port_info);
+
+ siu_dai_open(siu_stream);
+
+ siu_dai_pcmdatapack(siu_stream);
+
+ ret = siu_dai_spbstart(port_info);
+ if (ret < 0)
+ goto fail;
+ }
+
+ port_info->play_cap |= self;
+
+fail:
+ return ret;
+}
+
+/*
+ * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
+ * capture, however, the current API sets the bus format globally for a DAI.
+ */
+static int siu_dai_set_fmt(struct snd_soc_dai *dai,
+ unsigned int fmt)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ u32 ifctl;
+
+ dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
+ __func__, fmt, info->port_id);
+
+ if (info->port_id < 0)
+ return -ENODEV;
+
+ /* Here select between I2S / PCM / SPDIF */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ ifctl = siu_flags[info->port_id].playback.i2s |
+ siu_flags[info->port_id].capture.i2s;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ ifctl = siu_flags[info->port_id].playback.pcm |
+ siu_flags[info->port_id].capture.pcm;
+ break;
+ /* SPDIF disabled - see comment at the top */
+ default:
+ return -EINVAL;
+ }
+
+ ifctl |= ~(siu_flags[info->port_id].playback.mask |
+ siu_flags[info->port_id].capture.mask) &
+ siu_read32(base + SIU_IFCTL);
+ siu_write32(base + SIU_IFCTL, ifctl);
+
+ return 0;
+}
+
+static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct clk *siu_clk, *parent_clk;
+ char *siu_name, *parent_name;
+ int ret;
+
+ if (dir != SND_SOC_CLOCK_IN)
+ return -EINVAL;
+
+ dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
+
+ switch (clk_id) {
+ case SIU_CLKA_PLL:
+ siu_name = "siua_clk";
+ parent_name = "pll_clk";
+ break;
+ case SIU_CLKA_EXT:
+ siu_name = "siua_clk";
+ parent_name = "siumcka_clk";
+ break;
+ case SIU_CLKB_PLL:
+ siu_name = "siub_clk";
+ parent_name = "pll_clk";
+ break;
+ case SIU_CLKB_EXT:
+ siu_name = "siub_clk";
+ parent_name = "siumckb_clk";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ siu_clk = clk_get(siu_i2s_dai.dev, siu_name);
+ if (IS_ERR(siu_clk))
+ return PTR_ERR(siu_clk);
+
+ parent_clk = clk_get(siu_i2s_dai.dev, parent_name);
+ if (!IS_ERR(parent_clk)) {
+ ret = clk_set_parent(siu_clk, parent_clk);
+ if (!ret)
+ clk_set_rate(siu_clk, freq);
+ clk_put(parent_clk);
+ }
+
+ clk_put(siu_clk);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops siu_dai_ops = {
+ .startup = siu_dai_startup,
+ .shutdown = siu_dai_shutdown,
+ .prepare = siu_dai_prepare,
+ .set_sysclk = siu_dai_set_sysclk,
+ .set_fmt = siu_dai_set_fmt,
+};
+
+struct snd_soc_dai siu_i2s_dai = {
+ .name = "sh-siu",
+ .id = 0,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .formats = SNDRV_PCM_FMTBIT_S16,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .formats = SNDRV_PCM_FMTBIT_S16,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ },
+ .ops = &siu_dai_ops,
+};
+EXPORT_SYMBOL_GPL(siu_i2s_dai);
+
+static int __devinit siu_probe(struct platform_device *pdev)
+{
+ const struct firmware *fw_entry;
+ struct resource *res, *region;
+ struct siu_info *info;
+ int ret;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
+ if (ret)
+ goto ereqfw;
+
+ /*
+ * Loaded firmware is "const" - read only, but we have to modify it in
+ * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
+ */
+ memcpy(&info->fw, fw_entry->data, fw_entry->size);
+
+ release_firmware(fw_entry);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto egetres;
+ }
+
+ region = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+ if (!region) {
+ dev_err(&pdev->dev, "SIU region already claimed\n");
+ ret = -EBUSY;
+ goto ereqmemreg;
+ }
+
+ ret = -ENOMEM;
+ info->pram = ioremap(res->start, PRAM_SIZE);
+ if (!info->pram)
+ goto emappram;
+ info->xram = ioremap(res->start + XRAM_OFFSET, XRAM_SIZE);
+ if (!info->xram)
+ goto emapxram;
+ info->yram = ioremap(res->start + YRAM_OFFSET, YRAM_SIZE);
+ if (!info->yram)
+ goto emapyram;
+ info->reg = ioremap(res->start + REG_OFFSET, resource_size(res) -
+ REG_OFFSET);
+ if (!info->reg)
+ goto emapreg;
+
+ siu_i2s_dai.dev = &pdev->dev;
+ siu_i2s_dai.private_data = info;
+
+ ret = snd_soc_register_dais(&siu_i2s_dai, 1);
+ if (ret < 0)
+ goto edaiinit;
+
+ ret = snd_soc_register_platform(&siu_platform);
+ if (ret < 0)
+ goto esocregp;
+
+ pm_runtime_enable(&pdev->dev);
+
+ return ret;
+
+esocregp:
+ snd_soc_unregister_dais(&siu_i2s_dai, 1);
+edaiinit:
+ iounmap(info->reg);
+emapreg:
+ iounmap(info->yram);
+emapyram:
+ iounmap(info->xram);
+emapxram:
+ iounmap(info->pram);
+emappram:
+ release_mem_region(res->start, resource_size(res));
+ereqmemreg:
+egetres:
+ereqfw:
+ kfree(info);
+
+ return ret;
+}
+
+static int __devexit siu_remove(struct platform_device *pdev)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct resource *res;
+
+ pm_runtime_disable(&pdev->dev);
+
+ snd_soc_unregister_platform(&siu_platform);
+ snd_soc_unregister_dais(&siu_i2s_dai, 1);
+
+ iounmap(info->reg);
+ iounmap(info->yram);
+ iounmap(info->xram);
+ iounmap(info->pram);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ kfree(info);
+
+ return 0;
+}
+
+static struct platform_driver siu_driver = {
+ .driver = {
+ .name = "sh_siu",
+ },
+ .probe = siu_probe,
+ .remove = __devexit_p(siu_remove),
+};
+
+static int __init siu_init(void)
+{
+ return platform_driver_register(&siu_driver);
+}
+
+static void __exit siu_exit(void)
+{
+ platform_driver_unregister(&siu_driver);
+}
+
+module_init(siu_init)
+module_exit(siu_exit)
+
+MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
+MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
new file mode 100644
index 0000000..c5efc30
--- /dev/null
+++ b/sound/soc/sh/siu_pcm.c
@@ -0,0 +1,616 @@
+/*
+ * siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dai.h>
+
+#include <asm/dma-sh.h>
+#include <asm/siu.h>
+
+#include "siu.h"
+
+#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
+ ((buf_bytes) / (period_bytes))
+#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
+ ((buf_addr) + ((period_num) * (period_bytes)))
+
+#define RWF_STM_RD 0x01 /* Read in progress */
+#define RWF_STM_WT 0x02 /* Write in progress */
+
+struct siu_port *siu_ports[SIU_PORT_NUM];
+
+/* transfersize is number of u32 dma transfers per period */
+static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_stream *siu_stream = &port_info->playback;
+ u32 stfifo;
+
+ if (!siu_stream->rw_flg)
+ return -EPERM;
+
+ /* output FIFO disable */
+ stfifo = siu_read32(base + SIU_STFIFO);
+ siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
+ pr_debug("%s: STFIFO %x -> %x\n", __func__,
+ stfifo, stfifo & ~0x0c180c18);
+
+ /* during stmwrite clear */
+ siu_stream->rw_flg = 0;
+
+ return 0;
+}
+
+static int siu_pcm_stmwrite_start(struct siu_port *port_info)
+{
+ struct siu_stream *siu_stream = &port_info->playback;
+
+ if (siu_stream->rw_flg)
+ return -EPERM;
+
+ /* Current period in buffer */
+ port_info->playback.cur_period = 0;
+
+ /* during stmwrite flag set */
+ siu_stream->rw_flg = RWF_STM_WT;
+
+ /* DMA transfer start */
+ tasklet_schedule(&siu_stream->tasklet);
+
+ return 0;
+}
+
+static void siu_dma_tx_complete(void *arg)
+{
+ struct siu_stream *siu_stream = arg;
+
+ if (!siu_stream->rw_flg)
+ return;
+
+ /* Update completed period count */
+ if (++siu_stream->cur_period >=
+ GET_MAX_PERIODS(siu_stream->buf_bytes,
+ siu_stream->period_bytes))
+ siu_stream->cur_period = 0;
+
+ pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
+ __func__, siu_stream->cur_period,
+ siu_stream->cur_period * siu_stream->period_bytes,
+ siu_stream->buf_bytes, siu_stream->cookie);
+
+ tasklet_schedule(&siu_stream->tasklet);
+
+ /* Notify alsa: a period is done */
+ snd_pcm_period_elapsed(siu_stream->substream);
+}
+
+static int siu_pcm_wr_set(struct siu_port *port_info,
+ dma_addr_t buff, u32 size)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_stream *siu_stream = &port_info->playback;
+ struct snd_pcm_substream *substream = siu_stream->substream;
+ struct device *dev = substream->pcm->card->dev;
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t cookie;
+ struct scatterlist sg;
+ u32 stfifo;
+
+ sg_init_table(&sg, 1);
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
+ size, offset_in_page(buff));
+ sg_dma_address(&sg) = buff;
+
+ desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan,
+ &sg, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(dev, "Failed to allocate a dma descriptor\n");
+ return -ENOMEM;
+ }
+
+ desc->callback = siu_dma_tx_complete;
+ desc->callback_param = siu_stream;
+ cookie = desc->tx_submit(desc);
+ if (cookie < 0) {
+ dev_err(dev, "Failed to submit a dma transfer\n");
+ return cookie;
+ }
+
+ siu_stream->tx_desc = desc;
+ siu_stream->cookie = cookie;
+
+ dma_async_issue_pending(siu_stream->chan);
+
+ /* only output FIFO enable */
+ stfifo = siu_read32(base + SIU_STFIFO);
+ siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
+ dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
+ stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
+
+ return 0;
+}
+
+static int siu_pcm_rd_set(struct siu_port *port_info,
+ dma_addr_t buff, size_t size)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_stream *siu_stream = &port_info->capture;
+ struct snd_pcm_substream *substream = siu_stream->substream;
+ struct device *dev = substream->pcm->card->dev;
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t cookie;
+ struct scatterlist sg;
+ u32 stfifo;
+
+ dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
+
+ sg_init_table(&sg, 1);
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
+ size, offset_in_page(buff));
+ sg_dma_address(&sg) = buff;
+
+ desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan,
+ &sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(dev, "Failed to allocate dma descriptor\n");
+ return -ENOMEM;
+ }
+
+ desc->callback = siu_dma_tx_complete;
+ desc->callback_param = siu_stream;
+ cookie = desc->tx_submit(desc);
+ if (cookie < 0) {
+ dev_err(dev, "Failed to submit dma descriptor\n");
+ return cookie;
+ }
+
+ siu_stream->tx_desc = desc;
+ siu_stream->cookie = cookie;
+
+ dma_async_issue_pending(siu_stream->chan);
+
+ /* only input FIFO enable */
+ stfifo = siu_read32(base + SIU_STFIFO);
+ siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
+ (port_info->stfifo & 0x13071307));
+ dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
+ stfifo, stfifo | (port_info->stfifo & 0x13071307));
+
+ return 0;
+}
+
+static void siu_io_tasklet(unsigned long data)
+{
+ struct siu_stream *siu_stream = (struct siu_stream *)data;
+ struct snd_pcm_substream *substream = siu_stream->substream;
+ struct device *dev = substream->pcm->card->dev;
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct siu_port *port_info = siu_port_info(substream);
+
+ dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
+
+ if (!siu_stream->rw_flg) {
+ dev_dbg(dev, "%s: stream inactive\n", __func__);
+ return;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ dma_addr_t buff;
+ size_t count;
+ u8 *virt;
+
+ buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
+ siu_stream->cur_period,
+ siu_stream->period_bytes);
+ virt = PERIOD_OFFSET(rt->dma_area,
+ siu_stream->cur_period,
+ siu_stream->period_bytes);
+ count = siu_stream->period_bytes;
+
+ /* DMA transfer start */
+ siu_pcm_rd_set(port_info, buff, count);
+ } else {
+ siu_pcm_wr_set(port_info,
+ (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
+ siu_stream->cur_period,
+ siu_stream->period_bytes),
+ siu_stream->period_bytes);
+ }
+}
+
+/* Capture */
+static int siu_pcm_stmread_start(struct siu_port *port_info)
+{
+ struct siu_stream *siu_stream = &port_info->capture;
+
+ if (siu_stream->xfer_cnt > 0x1000000)
+ return -EINVAL;
+ if (siu_stream->rw_flg)
+ return -EPERM;
+
+ /* Current period in buffer */
+ siu_stream->cur_period = 0;
+
+ /* during stmread flag set */
+ siu_stream->rw_flg = RWF_STM_RD;
+
+ tasklet_schedule(&siu_stream->tasklet);
+
+ return 0;
+}
+
+static int siu_pcm_stmread_stop(struct siu_port *port_info)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_stream *siu_stream = &port_info->capture;
+ struct device *dev = siu_stream->substream->pcm->card->dev;
+ u32 stfifo;
+
+ if (!siu_stream->rw_flg)
+ return -EPERM;
+
+ /* input FIFO disable */
+ stfifo = siu_read32(base + SIU_STFIFO);
+ siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
+ dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
+ stfifo, stfifo & ~0x13071307);
+
+ /* during stmread flag clear */
+ siu_stream->rw_flg = 0;
+
+ return 0;
+}
+
+static int siu_pcm_hw_params(struct snd_pcm_substream *ss,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct device *dev = ss->pcm->card->dev;
+ int ret;
+
+ dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
+
+ ret = snd_pcm_lib_malloc_pages(ss, params_buffer_bytes(hw_params));
+ if (ret < 0)
+ dev_err(dev, "snd_pcm_lib_malloc_pages() failed\n");
+
+ return ret;
+}
+
+static int siu_pcm_hw_free(struct snd_pcm_substream *ss)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_port *port_info = siu_port_info(ss);
+ struct device *dev = ss->pcm->card->dev;
+ struct siu_stream *siu_stream;
+
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ siu_stream = &port_info->playback;
+ else
+ siu_stream = &port_info->capture;
+
+ dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
+
+ return snd_pcm_lib_free_pages(ss);
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ struct sh_dmae_slave *param = slave;
+
+ pr_debug("%s: slave ID %d\n", __func__, param->slave_id);
+
+ if (unlikely(param->dma_dev != chan->device->dev))
+ return false;
+
+ chan->private = param;
+ return true;
+}
+
+static int siu_pcm_open(struct snd_pcm_substream *ss)
+{
+ /* Playback / Capture */
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_port *port_info = siu_port_info(ss);
+ struct siu_stream *siu_stream;
+ u32 port = info->port_id;
+ struct siu_platform *pdata = siu_i2s_dai.dev->platform_data;
+ struct device *dev = ss->pcm->card->dev;
+ dma_cap_mask_t mask;
+ struct sh_dmae_slave *param;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
+
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ siu_stream = &port_info->playback;
+ param = &siu_stream->param;
+ param->slave_id = port ? SHDMA_SLAVE_SIUB_TX :
+ SHDMA_SLAVE_SIUA_TX;
+ } else {
+ siu_stream = &port_info->capture;
+ param = &siu_stream->param;
+ param->slave_id = port ? SHDMA_SLAVE_SIUB_RX :
+ SHDMA_SLAVE_SIUA_RX;
+ }
+
+ param->dma_dev = pdata->dma_dev;
+ /* Get DMA channel */
+ siu_stream->chan = dma_request_channel(mask, filter, param);
+ if (!siu_stream->chan) {
+ dev_err(dev, "DMA channel allocation failed!\n");
+ return -EBUSY;
+ }
+
+ siu_stream->substream = ss;
+
+ return 0;
+}
+
+static int siu_pcm_close(struct snd_pcm_substream *ss)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct device *dev = ss->pcm->card->dev;
+ struct siu_port *port_info = siu_port_info(ss);
+ struct siu_stream *siu_stream;
+
+ dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
+
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ siu_stream = &port_info->playback;
+ else
+ siu_stream = &port_info->capture;
+
+ dma_release_channel(siu_stream->chan);
+ siu_stream->chan = NULL;
+
+ siu_stream->substream = NULL;
+
+ return 0;
+}
+
+static int siu_pcm_prepare(struct snd_pcm_substream *ss)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct siu_port *port_info = siu_port_info(ss);
+ struct device *dev = ss->pcm->card->dev;
+ struct snd_pcm_runtime *rt = ss->runtime;
+ struct siu_stream *siu_stream;
+ snd_pcm_sframes_t xfer_cnt;
+
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ siu_stream = &port_info->playback;
+ else
+ siu_stream = &port_info->capture;
+
+ rt = siu_stream->substream->runtime;
+
+ siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
+ siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
+
+ dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
+ info->port_id, rt->channels, siu_stream->period_bytes);
+
+ /* We only support buffers that are multiples of the period */
+ if (siu_stream->buf_bytes % siu_stream->period_bytes) {
+ dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
+ __func__, siu_stream->buf_bytes,
+ siu_stream->period_bytes);
+ return -EINVAL;
+ }
+
+ xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
+ if (!xfer_cnt || xfer_cnt > 0x1000000)
+ return -EINVAL;
+
+ siu_stream->format = rt->format;
+ siu_stream->xfer_cnt = xfer_cnt;
+
+ dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
+ "format=%d channels=%d xfer_cnt=%d\n", info->port_id,
+ (unsigned long)rt->dma_addr, siu_stream->buf_bytes,
+ siu_stream->period_bytes,
+ siu_stream->format, rt->channels, (int)xfer_cnt);
+
+ return 0;
+}
+
+static int siu_pcm_trigger(struct snd_pcm_substream *ss, int cmd)
+{
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct device *dev = ss->pcm->card->dev;
+ struct siu_port *port_info = siu_port_info(ss);
+ int ret;
+
+ dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
+ info->port_id, port_info, cmd);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ret = siu_pcm_stmwrite_start(port_info);
+ else
+ ret = siu_pcm_stmread_start(port_info);
+
+ if (ret < 0)
+ dev_warn(dev, "%s: start failed on port=%d\n",
+ __func__, info->port_id);
+
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ siu_pcm_stmwrite_stop(port_info);
+ else
+ siu_pcm_stmread_stop(port_info);
+ ret = 0;
+
+ break;
+ default:
+ dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/*
+ * So far only resolution of one period is supported, subject to extending the
+ * dmangine API
+ */
+static snd_pcm_uframes_t siu_pcm_pointer_dma(struct snd_pcm_substream *ss)
+{
+ struct device *dev = ss->pcm->card->dev;
+ struct siu_info *info = siu_i2s_dai.private_data;
+ u32 __iomem *base = info->reg;
+ struct siu_port *port_info = siu_port_info(ss);
+ struct snd_pcm_runtime *rt = ss->runtime;
+ size_t ptr;
+ struct siu_stream *siu_stream;
+
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ siu_stream = &port_info->playback;
+ else
+ siu_stream = &port_info->capture;
+
+ /*
+ * ptr is the offset into the buffer where the dma is currently at. We
+ * check if the dma buffer has just wrapped.
+ */
+ ptr = PERIOD_OFFSET(rt->dma_addr,
+ siu_stream->cur_period,
+ siu_stream->period_bytes) - rt->dma_addr;
+
+ dev_dbg(dev,
+ "%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
+ __func__, info->port_id, siu_read32(base + SIU_EVNTC),
+ siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
+ siu_stream->cookie);
+
+ if (ptr >= siu_stream->buf_bytes)
+ ptr = 0;
+
+ return bytes_to_frames(ss->runtime, ptr);
+}
+
+static int siu_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ /* card->dev == socdev->dev, see snd_soc_new_pcms() */
+ struct siu_info *info = siu_i2s_dai.private_data;
+ struct platform_device *pdev = to_platform_device(card->dev);
+ int ret;
+ int i;
+
+ /* pdev->id selects between SIUA and SIUB */
+ if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
+ return -EINVAL;
+
+ info->port_id = pdev->id;
+
+ /*
+ * While the siu has 2 ports, only one port can be on at a time (only 1
+ * SPB). So far all the boards using the siu had only one of the ports
+ * wired to a codec. To simplify things, we only register one port with
+ * alsa. In case both ports are needed, it should be changed here
+ */
+ for (i = pdev->id; i < pdev->id + 1; i++) {
+ struct siu_port **port_info = &siu_ports[i];
+
+ ret = siu_init_port(i, port_info, card);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_DEV, NULL,
+ SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "snd_pcm_lib_preallocate_pages_for_all() err=%d",
+ ret);
+ goto fail;
+ }
+
+ (*port_info)->pcm = pcm;
+
+ /* IO tasklets */
+ tasklet_init(&(*port_info)->playback.tasklet, siu_io_tasklet,
+ (unsigned long)&(*port_info)->playback);
+ tasklet_init(&(*port_info)->capture.tasklet, siu_io_tasklet,
+ (unsigned long)&(*port_info)->capture);
+ }
+
+ dev_info(card->dev, "SuperH SIU driver initialized.\n");
+ return 0;
+
+fail:
+ siu_free_port(siu_ports[pdev->id]);
+ dev_err(card->dev, "SIU: failed to initialize.\n");
+ return ret;
+}
+
+static void siu_pcm_free(struct snd_pcm *pcm)
+{
+ struct platform_device *pdev = to_platform_device(pcm->card->dev);
+ struct siu_port *port_info = siu_ports[pdev->id];
+
+ tasklet_kill(&port_info->capture.tasklet);
+ tasklet_kill(&port_info->playback.tasklet);
+
+ siu_free_port(port_info);
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+
+ dev_dbg(pcm->card->dev, "%s\n", __func__);
+}
+
+static struct snd_pcm_ops siu_pcm_ops = {
+ .open = siu_pcm_open,
+ .close = siu_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = siu_pcm_hw_params,
+ .hw_free = siu_pcm_hw_free,
+ .prepare = siu_pcm_prepare,
+ .trigger = siu_pcm_trigger,
+ .pointer = siu_pcm_pointer_dma,
+};
+
+struct snd_soc_platform siu_platform = {
+ .name = "siu-audio",
+ .pcm_ops = &siu_pcm_ops,
+ .pcm_new = siu_pcm_new,
+ .pcm_free = siu_pcm_free,
+};
+EXPORT_SYMBOL_GPL(siu_platform);
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index d2505e8..5869dc3 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -15,6 +15,74 @@
#include <linux/spi/spi.h>
#include <sound/soc.h>
+static unsigned int snd_soc_4_12_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= codec->reg_cache_size)
+ return -1;
+ return cache[reg];
+}
+
+static int snd_soc_4_12_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ u8 data[2];
+ int ret;
+
+ BUG_ON(codec->volatile_register);
+
+ data[0] = (reg << 4) | ((value >> 8) & 0x000f);
+ data[1] = value & 0x00ff;
+
+ if (reg < codec->reg_cache_size)
+ cache[reg] = value;
+
+ if (codec->cache_only) {
+ codec->cache_sync = 1;
+ return 0;
+ }
+
+ ret = codec->hw_write(codec->control_data, data, 2);
+ if (ret == 2)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_4_12_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[1];
+ msg[1] = data[0];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_4_12_spi_write NULL
+#endif
+
static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec,
unsigned int reg)
{
@@ -38,6 +106,12 @@
if (reg < codec->reg_cache_size)
cache[reg] = value;
+
+ if (codec->cache_only) {
+ codec->cache_sync = 1;
+ return 0;
+ }
+
ret = codec->hw_write(codec->control_data, data, 2);
if (ret == 2)
return 0;
@@ -91,6 +165,11 @@
if (reg < codec->reg_cache_size)
cache[reg] = value;
+ if (codec->cache_only) {
+ codec->cache_sync = 1;
+ return 0;
+ }
+
if (codec->hw_write(codec->control_data, data, 2) == 2)
return 0;
else
@@ -119,6 +198,11 @@
if (!snd_soc_codec_volatile_register(codec, reg))
reg_cache[reg] = value;
+ if (codec->cache_only) {
+ codec->cache_sync = 1;
+ return 0;
+ }
+
if (codec->hw_write(codec->control_data, data, 3) == 3)
return 0;
else
@@ -131,10 +215,14 @@
u16 *cache = codec->reg_cache;
if (reg >= codec->reg_cache_size ||
- snd_soc_codec_volatile_register(codec, reg))
+ snd_soc_codec_volatile_register(codec, reg)) {
+ if (codec->cache_only)
+ return -EINVAL;
+
return codec->hw_read(codec, reg);
- else
+ } else {
return cache[reg];
+ }
}
#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
@@ -171,6 +259,114 @@
#define snd_soc_8_16_read_i2c NULL
#endif
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+static unsigned int snd_soc_16_8_read_i2c(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct i2c_msg xfer[2];
+ u16 reg = r;
+ u8 data;
+ int ret;
+ struct i2c_client *client = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 2;
+ xfer[0].buf = (u8 *)®
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 1;
+ xfer[1].buf = &data;
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+ return 0;
+ }
+
+ return data;
+}
+#else
+#define snd_soc_16_8_read_i2c NULL
+#endif
+
+static unsigned int snd_soc_16_8_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ reg &= 0xff;
+ if (reg >= codec->reg_cache_size)
+ return -1;
+ return cache[reg];
+}
+
+static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ u8 data[3];
+ int ret;
+
+ BUG_ON(codec->volatile_register);
+
+ data[0] = (reg >> 8) & 0xff;
+ data[1] = reg & 0xff;
+ data[2] = value;
+
+ reg &= 0xff;
+ if (reg < codec->reg_cache_size)
+ cache[reg] = value;
+
+ if (codec->cache_only) {
+ codec->cache_sync = 1;
+ return 0;
+ }
+
+ ret = codec->hw_write(codec->control_data, data, 3);
+ if (ret == 3)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_16_8_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[3];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+ msg[2] = data[2];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_16_8_spi_write NULL
+#endif
+
+
static struct {
int addr_bits;
int data_bits;
@@ -180,9 +376,14 @@
unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
} io_types[] = {
{
+ .addr_bits = 4, .data_bits = 12,
+ .write = snd_soc_4_12_write, .read = snd_soc_4_12_read,
+ .spi_write = snd_soc_4_12_spi_write,
+ },
+ {
.addr_bits = 7, .data_bits = 9,
.write = snd_soc_7_9_write, .read = snd_soc_7_9_read,
- .spi_write = snd_soc_7_9_spi_write
+ .spi_write = snd_soc_7_9_spi_write,
},
{
.addr_bits = 8, .data_bits = 8,
@@ -193,6 +394,12 @@
.write = snd_soc_8_16_write, .read = snd_soc_8_16_read,
.i2c_read = snd_soc_8_16_read_i2c,
},
+ {
+ .addr_bits = 16, .data_bits = 8,
+ .write = snd_soc_16_8_write, .read = snd_soc_16_8_read,
+ .i2c_read = snd_soc_16_8_read_i2c,
+ .spi_write = snd_soc_16_8_spi_write,
+ },
};
/**
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 0a6440c..a03bac9 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -130,6 +130,29 @@
static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
+static ssize_t pmdown_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct snd_soc_device *socdev = dev_get_drvdata(dev);
+ struct snd_soc_card *card = socdev->card;
+
+ return sprintf(buf, "%ld\n", card->pmdown_time);
+}
+
+static ssize_t pmdown_time_set(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_soc_device *socdev = dev_get_drvdata(dev);
+ struct snd_soc_card *card = socdev->card;
+
+ strict_strtol(buf, 10, &card->pmdown_time);
+
+ return count;
+}
+
+static DEVICE_ATTR(pmdown_time, 0644, pmdown_time_show, pmdown_time_set);
+
#ifdef CONFIG_DEBUG_FS
static int codec_reg_open_file(struct inode *inode, struct file *file)
{
@@ -542,7 +565,7 @@
/* start delayed pop wq here for playback streams */
codec_dai->pop_wait = 1;
schedule_delayed_work(&card->delayed_work,
- msecs_to_jiffies(pmdown_time));
+ msecs_to_jiffies(card->pmdown_time));
} else {
/* capture streams can be powered down now */
snd_soc_dapm_stream_event(codec,
@@ -940,6 +963,12 @@
struct snd_soc_card *card = socdev->card;
struct snd_soc_dai *cpu_dai = card->dai_link[0].cpu_dai;
+ /* If the initialization of this soc device failed, there is no codec
+ * associated with it. Just bail out in this case.
+ */
+ if (!card->codec)
+ return 0;
+
/* AC97 devices might have other drivers hanging off them so
* need to resume immediately. Other drivers don't have that
* problem and may take a substantial amount of time to resume
@@ -1039,6 +1068,8 @@
dev_dbg(card->dev, "All components present, instantiating\n");
/* Found everything, bring it up */
+ card->pmdown_time = pmdown_time;
+
if (card->probe) {
ret = card->probe(pdev);
if (ret < 0)
@@ -1122,6 +1153,10 @@
if (ret < 0)
printk(KERN_WARNING "asoc: failed to add dapm sysfs entries\n");
+ ret = device_create_file(card->socdev->dev, &dev_attr_pmdown_time);
+ if (ret < 0)
+ printk(KERN_WARNING "asoc: failed to add pmdown_time sysfs\n");
+
ret = device_create_file(card->socdev->dev, &dev_attr_codec_reg);
if (ret < 0)
printk(KERN_WARNING "asoc: failed to add codec sysfs files\n");
@@ -1276,8 +1311,8 @@
codec_dai->codec = card->codec;
/* check client and interface hw capabilities */
- sprintf(new_name, "%s %s-%d", dai_link->stream_name, codec_dai->name,
- num);
+ snprintf(new_name, sizeof(new_name), "%s %s-%d",
+ dai_link->stream_name, codec_dai->name, num);
if (codec_dai->playback.channels_min)
playback = 1;
@@ -1368,6 +1403,7 @@
codec->ac97->bus->ops = ops;
codec->ac97->num = num;
+ codec->dev = &codec->ac97->dev;
mutex_unlock(&codec->mutex);
return 0;
}
@@ -1427,9 +1463,9 @@
*
* Returns 1 for change else 0.
*/
-static int snd_soc_update_bits_locked(struct snd_soc_codec *codec,
- unsigned short reg, unsigned int mask,
- unsigned int value)
+int snd_soc_update_bits_locked(struct snd_soc_codec *codec,
+ unsigned short reg, unsigned int mask,
+ unsigned int value)
{
int change;
@@ -1439,6 +1475,7 @@
return change;
}
+EXPORT_SYMBOL_GPL(snd_soc_update_bits_locked);
/**
* snd_soc_test_bits - test register for change
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 0d294ef..6c33510 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -44,13 +44,6 @@
#include <sound/soc-dapm.h>
#include <sound/initval.h>
-/* debug */
-#ifdef DEBUG
-#define dump_dapm(codec, action) dbg_dump_dapm(codec, action)
-#else
-#define dump_dapm(codec, action)
-#endif
-
/* dapm power sequences - make this per codec in the future */
static int dapm_up_seq[] = {
[snd_soc_dapm_pre] = 0,
@@ -739,6 +732,8 @@
struct snd_soc_dapm_widget *b,
int sort[])
{
+ if (a->codec != b->codec)
+ return (unsigned long)a - (unsigned long)b;
if (sort[a->id] != sort[b->id])
return sort[a->id] - sort[b->id];
if (a->reg != b->reg)
@@ -1017,13 +1012,28 @@
sys_power = 0;
break;
case SND_SOC_DAPM_STREAM_NOP:
- sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY;
+ switch (codec->bias_level) {
+ case SND_SOC_BIAS_STANDBY:
+ case SND_SOC_BIAS_OFF:
+ sys_power = 0;
+ break;
+ default:
+ sys_power = 1;
+ break;
+ }
break;
default:
break;
}
}
+ if (sys_power && codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = snd_soc_dapm_set_bias_level(socdev,
+ SND_SOC_BIAS_STANDBY);
+ if (ret != 0)
+ pr_err("Failed to turn on bias: %d\n", ret);
+ }
+
/* If we're changing to all on or all off then prepare */
if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
(!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
@@ -1047,6 +1057,14 @@
pr_err("Failed to apply standby bias: %d\n", ret);
}
+ /* If we're in standby and can support bias off then do that */
+ if (codec->bias_level == SND_SOC_BIAS_STANDBY &&
+ codec->idle_bias_off) {
+ ret = snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_OFF);
+ if (ret != 0)
+ pr_err("Failed to turn off bias: %d\n", ret);
+ }
+
/* If we just powered up then move to active bias */
if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
ret = snd_soc_dapm_set_bias_level(socdev,
@@ -1061,66 +1079,6 @@
return 0;
}
-#ifdef DEBUG
-static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action)
-{
- struct snd_soc_dapm_widget *w;
- struct snd_soc_dapm_path *p = NULL;
- int in, out;
-
- printk("DAPM %s %s\n", codec->name, action);
-
- list_for_each_entry(w, &codec->dapm_widgets, list) {
-
- /* only display widgets that effect routing */
- switch (w->id) {
- case snd_soc_dapm_pre:
- case snd_soc_dapm_post:
- case snd_soc_dapm_vmid:
- continue;
- case snd_soc_dapm_mux:
- case snd_soc_dapm_value_mux:
- case snd_soc_dapm_output:
- case snd_soc_dapm_input:
- case snd_soc_dapm_switch:
- case snd_soc_dapm_hp:
- case snd_soc_dapm_mic:
- case snd_soc_dapm_spk:
- case snd_soc_dapm_line:
- case snd_soc_dapm_micbias:
- case snd_soc_dapm_dac:
- case snd_soc_dapm_adc:
- case snd_soc_dapm_pga:
- case snd_soc_dapm_mixer:
- case snd_soc_dapm_mixer_named_ctl:
- case snd_soc_dapm_supply:
- case snd_soc_dapm_aif_in:
- case snd_soc_dapm_aif_out:
- if (w->name) {
- in = is_connected_input_ep(w);
- dapm_clear_walk(w->codec);
- out = is_connected_output_ep(w);
- dapm_clear_walk(w->codec);
- printk("%s: %s in %d out %d\n", w->name,
- w->power ? "On":"Off",in, out);
-
- list_for_each_entry(p, &w->sources, list_sink) {
- if (p->connect)
- printk(" in %s %s\n", p->name ? p->name : "static",
- p->source->name);
- }
- list_for_each_entry(p, &w->sinks, list_source) {
- if (p->connect)
- printk(" out %s %s\n", p->name ? p->name : "static",
- p->sink->name);
- }
- }
- break;
- }
- }
-}
-#endif
-
#ifdef CONFIG_DEBUG_FS
static int dapm_widget_power_open_file(struct inode *inode, struct file *file)
{
@@ -1147,9 +1105,16 @@
out = is_connected_output_ep(w);
dapm_clear_walk(w->codec);
- ret = snprintf(buf, PAGE_SIZE, "%s: %s in %d out %d\n",
+ ret = snprintf(buf, PAGE_SIZE, "%s: %s in %d out %d",
w->name, w->power ? "On" : "Off", in, out);
+ if (w->reg >= 0)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ " - R%d(0x%x) bit %d",
+ w->reg, w->reg, w->shift);
+
+ ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
if (w->sname)
ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
w->sname,
@@ -1245,18 +1210,15 @@
path->connect = 0; /* old connection must be powered down */
}
- if (found) {
+ if (found)
dapm_power_widgets(widget->codec, SND_SOC_DAPM_STREAM_NOP);
- dump_dapm(widget->codec, "mux power update");
- }
return 0;
}
/* test and update the power status of a mixer or switch widget */
static int dapm_mixer_update_power(struct snd_soc_dapm_widget *widget,
- struct snd_kcontrol *kcontrol, int reg,
- int val_mask, int val, int invert)
+ struct snd_kcontrol *kcontrol, int connect)
{
struct snd_soc_dapm_path *path;
int found = 0;
@@ -1266,9 +1228,6 @@
widget->id != snd_soc_dapm_switch)
return -ENODEV;
- if (!snd_soc_test_bits(widget->codec, reg, val_mask, val))
- return 0;
-
/* find dapm widget path assoc with kcontrol */
list_for_each_entry(path, &widget->codec->dapm_paths, list) {
if (path->kcontrol != kcontrol)
@@ -1276,19 +1235,12 @@
/* found, now check type */
found = 1;
- if (val)
- /* new connection */
- path->connect = invert ? 0:1;
- else
- /* old connection must be powered down */
- path->connect = invert ? 1:0;
+ path->connect = connect;
break;
}
- if (found) {
+ if (found)
dapm_power_widgets(widget->codec, SND_SOC_DAPM_STREAM_NOP);
- dump_dapm(widget->codec, "mixer power update");
- }
return 0;
}
@@ -1404,9 +1356,7 @@
*/
int snd_soc_dapm_sync(struct snd_soc_codec *codec)
{
- int ret = dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP);
- dump_dapm(codec, "sync");
- return ret;
+ return dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP);
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_sync);
@@ -1688,6 +1638,7 @@
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned int val, val2, val_mask;
+ int connect;
int ret;
val = (ucontrol->value.integer.value[0] & mask);
@@ -1714,7 +1665,17 @@
return 1;
}
- dapm_mixer_update_power(widget, kcontrol, reg, val_mask, val, invert);
+ if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) {
+ if (val)
+ /* new connection */
+ connect = invert ? 0:1;
+ else
+ /* old connection must be powered down */
+ connect = invert ? 1:0;
+
+ dapm_mixer_update_power(widget, kcontrol, connect);
+ }
+
if (widget->event) {
if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
ret = widget->event(widget, kcontrol,
@@ -2152,7 +2113,6 @@
dapm_power_widgets(codec, event);
mutex_unlock(&codec->mutex);
- dump_dapm(codec, __func__);
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 73525c0..8c29258 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -21,6 +21,18 @@
To compile this driver as a module, choose M here: the module
will be called snd-usb-audio.
+config SND_USB_UA101
+ tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select SND_PCM
+ select SND_RAWMIDI
+ help
+ Say Y here to include support for the Edirol UA-101 audio/MIDI
+ interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-ua101.
+
config SND_USB_USX2Y
tristate "Tascam US-122, US-224 and US-428 USB driver"
depends on X86 || PPC || ALPHA
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index abb288b..5bf64ae 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -4,9 +4,11 @@
snd-usb-audio-objs := usbaudio.o usbmixer.o
snd-usb-lib-objs := usbmidi.o
+snd-ua101-objs := ua101.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_USB_AUDIO) += snd-usb-audio.o snd-usb-lib.o
+obj-$(CONFIG_SND_USB_UA101) += snd-ua101.o snd-usb-lib.o
obj-$(CONFIG_SND_USB_USX2Y) += snd-usb-lib.o
obj-$(CONFIG_SND_USB_US122L) += snd-usb-lib.o
diff --git a/sound/usb/ua101.c b/sound/usb/ua101.c
new file mode 100644
index 0000000..4f4ccdf
--- /dev/null
+++ b/sound/usb/ua101.c
@@ -0,0 +1,1421 @@
+/*
+ * Edirol UA-101 driver
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This driver is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include "usbaudio.h"
+
+MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
+
+/* I use my UA-1A for testing because I don't have a UA-101 ... */
+#define UA1A_HACK
+
+/*
+ * Should not be lower than the minimum scheduling delay of the host
+ * controller. Some Intel controllers need more than one frame; as long as
+ * that driver doesn't tell us about this, use 1.5 frames just to be sure.
+ */
+#define MIN_QUEUE_LENGTH 12
+/* Somewhat random. */
+#define MAX_QUEUE_LENGTH 30
+/*
+ * This magic value optimizes memory usage efficiency for the UA-101's packet
+ * sizes at all sample rates, taking into account the stupid cache pool sizes
+ * that usb_buffer_alloc() uses.
+ */
+#define DEFAULT_QUEUE_LENGTH 21
+
+#define MAX_PACKET_SIZE 672 /* hardware specific */
+#define MAX_MEMORY_BUFFERS DIV_ROUND_UP(MAX_QUEUE_LENGTH, \
+ PAGE_SIZE / MAX_PACKET_SIZE)
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static unsigned int queue_length = 21;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "card index");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "enable card");
+module_param(queue_length, uint, 0644);
+MODULE_PARM_DESC(queue_length, "USB queue length in microframes, "
+ __stringify(MIN_QUEUE_LENGTH)"-"__stringify(MAX_QUEUE_LENGTH));
+
+enum {
+ INTF_PLAYBACK,
+ INTF_CAPTURE,
+ INTF_MIDI,
+
+ INTF_COUNT
+};
+
+/* bits in struct ua101::states */
+enum {
+ USB_CAPTURE_RUNNING,
+ USB_PLAYBACK_RUNNING,
+ ALSA_CAPTURE_OPEN,
+ ALSA_PLAYBACK_OPEN,
+ ALSA_CAPTURE_RUNNING,
+ ALSA_PLAYBACK_RUNNING,
+ CAPTURE_URB_COMPLETED,
+ PLAYBACK_URB_COMPLETED,
+ DISCONNECTED,
+};
+
+struct ua101 {
+ struct usb_device *dev;
+ struct snd_card *card;
+ struct usb_interface *intf[INTF_COUNT];
+ int card_index;
+ struct snd_pcm *pcm;
+ struct list_head midi_list;
+ u64 format_bit;
+ unsigned int rate;
+ unsigned int packets_per_second;
+ spinlock_t lock;
+ struct mutex mutex;
+ unsigned long states;
+
+ /* FIFO to synchronize playback rate to capture rate */
+ unsigned int rate_feedback_start;
+ unsigned int rate_feedback_count;
+ u8 rate_feedback[MAX_QUEUE_LENGTH];
+
+ struct list_head ready_playback_urbs;
+ struct tasklet_struct playback_tasklet;
+ wait_queue_head_t alsa_capture_wait;
+ wait_queue_head_t rate_feedback_wait;
+ wait_queue_head_t alsa_playback_wait;
+ struct ua101_stream {
+ struct snd_pcm_substream *substream;
+ unsigned int usb_pipe;
+ unsigned int channels;
+ unsigned int frame_bytes;
+ unsigned int max_packet_bytes;
+ unsigned int period_pos;
+ unsigned int buffer_pos;
+ unsigned int queue_length;
+ struct ua101_urb {
+ struct urb urb;
+ struct usb_iso_packet_descriptor iso_frame_desc[1];
+ struct list_head ready_list;
+ } *urbs[MAX_QUEUE_LENGTH];
+ struct {
+ unsigned int size;
+ void *addr;
+ dma_addr_t dma;
+ } buffers[MAX_MEMORY_BUFFERS];
+ } capture, playback;
+
+ unsigned int fps[10];
+ unsigned int frame_counter;
+};
+
+static DEFINE_MUTEX(devices_mutex);
+static unsigned int devices_used;
+static struct usb_driver ua101_driver;
+
+static void abort_alsa_playback(struct ua101 *ua);
+static void abort_alsa_capture(struct ua101 *ua);
+
+static const char *usb_error_string(int err)
+{
+ switch (err) {
+ case -ENODEV:
+ return "no device";
+ case -ENOENT:
+ return "endpoint not enabled";
+ case -EPIPE:
+ return "endpoint stalled";
+ case -ENOSPC:
+ return "not enough bandwidth";
+ case -ESHUTDOWN:
+ return "device disabled";
+ case -EHOSTUNREACH:
+ return "device suspended";
+ case -EINVAL:
+ case -EAGAIN:
+ case -EFBIG:
+ case -EMSGSIZE:
+ return "internal error";
+ default:
+ return "unknown error";
+ }
+}
+
+static void abort_usb_capture(struct ua101 *ua)
+{
+ if (test_and_clear_bit(USB_CAPTURE_RUNNING, &ua->states)) {
+ wake_up(&ua->alsa_capture_wait);
+ wake_up(&ua->rate_feedback_wait);
+ }
+}
+
+static void abort_usb_playback(struct ua101 *ua)
+{
+ if (test_and_clear_bit(USB_PLAYBACK_RUNNING, &ua->states))
+ wake_up(&ua->alsa_playback_wait);
+}
+
+static void playback_urb_complete(struct urb *usb_urb)
+{
+ struct ua101_urb *urb = (struct ua101_urb *)usb_urb;
+ struct ua101 *ua = urb->urb.context;
+ unsigned long flags;
+
+ if (unlikely(urb->urb.status == -ENOENT || /* unlinked */
+ urb->urb.status == -ENODEV || /* device removed */
+ urb->urb.status == -ECONNRESET || /* unlinked */
+ urb->urb.status == -ESHUTDOWN)) { /* device disabled */
+ abort_usb_playback(ua);
+ abort_alsa_playback(ua);
+ return;
+ }
+
+ if (test_bit(USB_PLAYBACK_RUNNING, &ua->states)) {
+ /* append URB to FIFO */
+ spin_lock_irqsave(&ua->lock, flags);
+ list_add_tail(&urb->ready_list, &ua->ready_playback_urbs);
+ if (ua->rate_feedback_count > 0)
+ tasklet_schedule(&ua->playback_tasklet);
+ ua->playback.substream->runtime->delay -=
+ urb->urb.iso_frame_desc[0].length /
+ ua->playback.frame_bytes;
+ spin_unlock_irqrestore(&ua->lock, flags);
+ }
+}
+
+static void first_playback_urb_complete(struct urb *urb)
+{
+ struct ua101 *ua = urb->context;
+
+ urb->complete = playback_urb_complete;
+ playback_urb_complete(urb);
+
+ set_bit(PLAYBACK_URB_COMPLETED, &ua->states);
+ wake_up(&ua->alsa_playback_wait);
+}
+
+/* copy data from the ALSA ring buffer into the URB buffer */
+static bool copy_playback_data(struct ua101_stream *stream, struct urb *urb,
+ unsigned int frames)
+{
+ struct snd_pcm_runtime *runtime;
+ unsigned int frame_bytes, frames1;
+ const u8 *source;
+
+ runtime = stream->substream->runtime;
+ frame_bytes = stream->frame_bytes;
+ source = runtime->dma_area + stream->buffer_pos * frame_bytes;
+ if (stream->buffer_pos + frames <= runtime->buffer_size) {
+ memcpy(urb->transfer_buffer, source, frames * frame_bytes);
+ } else {
+ /* wrap around at end of ring buffer */
+ frames1 = runtime->buffer_size - stream->buffer_pos;
+ memcpy(urb->transfer_buffer, source, frames1 * frame_bytes);
+ memcpy(urb->transfer_buffer + frames1 * frame_bytes,
+ runtime->dma_area, (frames - frames1) * frame_bytes);
+ }
+
+ stream->buffer_pos += frames;
+ if (stream->buffer_pos >= runtime->buffer_size)
+ stream->buffer_pos -= runtime->buffer_size;
+ stream->period_pos += frames;
+ if (stream->period_pos >= runtime->period_size) {
+ stream->period_pos -= runtime->period_size;
+ return true;
+ }
+ return false;
+}
+
+static inline void add_with_wraparound(struct ua101 *ua,
+ unsigned int *value, unsigned int add)
+{
+ *value += add;
+ if (*value >= ua->playback.queue_length)
+ *value -= ua->playback.queue_length;
+}
+
+static void playback_tasklet(unsigned long data)
+{
+ struct ua101 *ua = (void *)data;
+ unsigned long flags;
+ unsigned int frames;
+ struct ua101_urb *urb;
+ bool do_period_elapsed = false;
+ int err;
+
+ if (unlikely(!test_bit(USB_PLAYBACK_RUNNING, &ua->states)))
+ return;
+
+ /*
+ * Synchronizing the playback rate to the capture rate is done by using
+ * the same sequence of packet sizes for both streams.
+ * Submitting a playback URB therefore requires both a ready URB and
+ * the size of the corresponding capture packet, i.e., both playback
+ * and capture URBs must have been completed. Since the USB core does
+ * not guarantee that playback and capture complete callbacks are
+ * called alternately, we use two FIFOs for packet sizes and read URBs;
+ * submitting playback URBs is possible as long as both FIFOs are
+ * nonempty.
+ */
+ spin_lock_irqsave(&ua->lock, flags);
+ while (ua->rate_feedback_count > 0 &&
+ !list_empty(&ua->ready_playback_urbs)) {
+ /* take packet size out of FIFO */
+ frames = ua->rate_feedback[ua->rate_feedback_start];
+ add_with_wraparound(ua, &ua->rate_feedback_start, 1);
+ ua->rate_feedback_count--;
+
+ /* take URB out of FIFO */
+ urb = list_first_entry(&ua->ready_playback_urbs,
+ struct ua101_urb, ready_list);
+ list_del(&urb->ready_list);
+
+ /* fill packet with data or silence */
+ urb->urb.iso_frame_desc[0].length =
+ frames * ua->playback.frame_bytes;
+ if (test_bit(ALSA_PLAYBACK_RUNNING, &ua->states))
+ do_period_elapsed |= copy_playback_data(&ua->playback,
+ &urb->urb,
+ frames);
+ else
+ memset(urb->urb.transfer_buffer, 0,
+ urb->urb.iso_frame_desc[0].length);
+
+ /* and off you go ... */
+ err = usb_submit_urb(&urb->urb, GFP_ATOMIC);
+ if (unlikely(err < 0)) {
+ spin_unlock_irqrestore(&ua->lock, flags);
+ abort_usb_playback(ua);
+ abort_alsa_playback(ua);
+ dev_err(&ua->dev->dev, "USB request error %d: %s\n",
+ err, usb_error_string(err));
+ return;
+ }
+ ua->playback.substream->runtime->delay += frames;
+ }
+ spin_unlock_irqrestore(&ua->lock, flags);
+ if (do_period_elapsed)
+ snd_pcm_period_elapsed(ua->playback.substream);
+}
+
+/* copy data from the URB buffer into the ALSA ring buffer */
+static bool copy_capture_data(struct ua101_stream *stream, struct urb *urb,
+ unsigned int frames)
+{
+ struct snd_pcm_runtime *runtime;
+ unsigned int frame_bytes, frames1;
+ u8 *dest;
+
+ runtime = stream->substream->runtime;
+ frame_bytes = stream->frame_bytes;
+ dest = runtime->dma_area + stream->buffer_pos * frame_bytes;
+ if (stream->buffer_pos + frames <= runtime->buffer_size) {
+ memcpy(dest, urb->transfer_buffer, frames * frame_bytes);
+ } else {
+ /* wrap around at end of ring buffer */
+ frames1 = runtime->buffer_size - stream->buffer_pos;
+ memcpy(dest, urb->transfer_buffer, frames1 * frame_bytes);
+ memcpy(runtime->dma_area,
+ urb->transfer_buffer + frames1 * frame_bytes,
+ (frames - frames1) * frame_bytes);
+ }
+
+ stream->buffer_pos += frames;
+ if (stream->buffer_pos >= runtime->buffer_size)
+ stream->buffer_pos -= runtime->buffer_size;
+ stream->period_pos += frames;
+ if (stream->period_pos >= runtime->period_size) {
+ stream->period_pos -= runtime->period_size;
+ return true;
+ }
+ return false;
+}
+
+static void capture_urb_complete(struct urb *urb)
+{
+ struct ua101 *ua = urb->context;
+ struct ua101_stream *stream = &ua->capture;
+ unsigned long flags;
+ unsigned int frames, write_ptr;
+ bool do_period_elapsed;
+ int err;
+
+ if (unlikely(urb->status == -ENOENT || /* unlinked */
+ urb->status == -ENODEV || /* device removed */
+ urb->status == -ECONNRESET || /* unlinked */
+ urb->status == -ESHUTDOWN)) /* device disabled */
+ goto stream_stopped;
+
+ if (urb->status >= 0 && urb->iso_frame_desc[0].status >= 0)
+ frames = urb->iso_frame_desc[0].actual_length /
+ stream->frame_bytes;
+ else
+ frames = 0;
+
+ spin_lock_irqsave(&ua->lock, flags);
+
+ if (frames > 0 && test_bit(ALSA_CAPTURE_RUNNING, &ua->states))
+ do_period_elapsed = copy_capture_data(stream, urb, frames);
+ else
+ do_period_elapsed = false;
+
+ if (test_bit(USB_CAPTURE_RUNNING, &ua->states)) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err < 0)) {
+ spin_unlock_irqrestore(&ua->lock, flags);
+ dev_err(&ua->dev->dev, "USB request error %d: %s\n",
+ err, usb_error_string(err));
+ goto stream_stopped;
+ }
+
+ /* append packet size to FIFO */
+ write_ptr = ua->rate_feedback_start;
+ add_with_wraparound(ua, &write_ptr, ua->rate_feedback_count);
+ ua->rate_feedback[write_ptr] = frames;
+ if (ua->rate_feedback_count < ua->playback.queue_length) {
+ ua->rate_feedback_count++;
+ if (ua->rate_feedback_count ==
+ ua->playback.queue_length)
+ wake_up(&ua->rate_feedback_wait);
+ } else {
+ /*
+ * Ring buffer overflow; this happens when the playback
+ * stream is not running. Throw away the oldest entry,
+ * so that the playback stream, when it starts, sees
+ * the most recent packet sizes.
+ */
+ add_with_wraparound(ua, &ua->rate_feedback_start, 1);
+ }
+ if (test_bit(USB_PLAYBACK_RUNNING, &ua->states) &&
+ !list_empty(&ua->ready_playback_urbs))
+ tasklet_schedule(&ua->playback_tasklet);
+ }
+
+ spin_unlock_irqrestore(&ua->lock, flags);
+
+ if (do_period_elapsed)
+ snd_pcm_period_elapsed(stream->substream);
+
+ /* for debugging: measure the sample rate relative to the USB clock */
+ ua->fps[ua->frame_counter++ / ua->packets_per_second] += frames;
+ if (ua->frame_counter >= ARRAY_SIZE(ua->fps) * ua->packets_per_second) {
+ printk(KERN_DEBUG "capture rate:");
+ for (frames = 0; frames < ARRAY_SIZE(ua->fps); ++frames)
+ printk(KERN_CONT " %u", ua->fps[frames]);
+ printk(KERN_CONT "\n");
+ memset(ua->fps, 0, sizeof(ua->fps));
+ ua->frame_counter = 0;
+ }
+ return;
+
+stream_stopped:
+ abort_usb_playback(ua);
+ abort_usb_capture(ua);
+ abort_alsa_playback(ua);
+ abort_alsa_capture(ua);
+}
+
+static void first_capture_urb_complete(struct urb *urb)
+{
+ struct ua101 *ua = urb->context;
+
+ urb->complete = capture_urb_complete;
+ capture_urb_complete(urb);
+
+ set_bit(CAPTURE_URB_COMPLETED, &ua->states);
+ wake_up(&ua->alsa_capture_wait);
+}
+
+static int submit_stream_urbs(struct ua101 *ua, struct ua101_stream *stream)
+{
+ unsigned int i;
+
+ for (i = 0; i < stream->queue_length; ++i) {
+ int err = usb_submit_urb(&stream->urbs[i]->urb, GFP_KERNEL);
+ if (err < 0) {
+ dev_err(&ua->dev->dev, "USB request error %d: %s\n",
+ err, usb_error_string(err));
+ return err;
+ }
+ }
+ return 0;
+}
+
+static void kill_stream_urbs(struct ua101_stream *stream)
+{
+ unsigned int i;
+
+ for (i = 0; i < stream->queue_length; ++i)
+ usb_kill_urb(&stream->urbs[i]->urb);
+}
+
+static int enable_iso_interface(struct ua101 *ua, unsigned int intf_index)
+{
+ struct usb_host_interface *alts;
+
+ alts = ua->intf[intf_index]->cur_altsetting;
+ if (alts->desc.bAlternateSetting != 1) {
+ int err = usb_set_interface(ua->dev,
+ alts->desc.bInterfaceNumber, 1);
+ if (err < 0) {
+ dev_err(&ua->dev->dev,
+ "cannot initialize interface; error %d: %s\n",
+ err, usb_error_string(err));
+ return err;
+ }
+ }
+ return 0;
+}
+
+static void disable_iso_interface(struct ua101 *ua, unsigned int intf_index)
+{
+ struct usb_host_interface *alts;
+
+ alts = ua->intf[intf_index]->cur_altsetting;
+ if (alts->desc.bAlternateSetting != 0) {
+ int err = usb_set_interface(ua->dev,
+ alts->desc.bInterfaceNumber, 0);
+ if (err < 0 && !test_bit(DISCONNECTED, &ua->states))
+ dev_warn(&ua->dev->dev,
+ "interface reset failed; error %d: %s\n",
+ err, usb_error_string(err));
+ }
+}
+
+static void stop_usb_capture(struct ua101 *ua)
+{
+ clear_bit(USB_CAPTURE_RUNNING, &ua->states);
+
+ kill_stream_urbs(&ua->capture);
+
+ disable_iso_interface(ua, INTF_CAPTURE);
+}
+
+static int start_usb_capture(struct ua101 *ua)
+{
+ int err;
+
+ if (test_bit(DISCONNECTED, &ua->states))
+ return -ENODEV;
+
+ if (test_bit(USB_CAPTURE_RUNNING, &ua->states))
+ return 0;
+
+ kill_stream_urbs(&ua->capture);
+
+ err = enable_iso_interface(ua, INTF_CAPTURE);
+ if (err < 0)
+ return err;
+
+ clear_bit(CAPTURE_URB_COMPLETED, &ua->states);
+ ua->capture.urbs[0]->urb.complete = first_capture_urb_complete;
+ ua->rate_feedback_start = 0;
+ ua->rate_feedback_count = 0;
+
+ set_bit(USB_CAPTURE_RUNNING, &ua->states);
+ err = submit_stream_urbs(ua, &ua->capture);
+ if (err < 0)
+ stop_usb_capture(ua);
+ return err;
+}
+
+static void stop_usb_playback(struct ua101 *ua)
+{
+ clear_bit(USB_PLAYBACK_RUNNING, &ua->states);
+
+ kill_stream_urbs(&ua->playback);
+
+ tasklet_kill(&ua->playback_tasklet);
+
+ disable_iso_interface(ua, INTF_PLAYBACK);
+}
+
+static int start_usb_playback(struct ua101 *ua)
+{
+ unsigned int i, frames;
+ struct urb *urb;
+ int err = 0;
+
+ if (test_bit(DISCONNECTED, &ua->states))
+ return -ENODEV;
+
+ if (test_bit(USB_PLAYBACK_RUNNING, &ua->states))
+ return 0;
+
+ kill_stream_urbs(&ua->playback);
+ tasklet_kill(&ua->playback_tasklet);
+
+ err = enable_iso_interface(ua, INTF_PLAYBACK);
+ if (err < 0)
+ return err;
+
+ clear_bit(PLAYBACK_URB_COMPLETED, &ua->states);
+ ua->playback.urbs[0]->urb.complete =
+ first_playback_urb_complete;
+ spin_lock_irq(&ua->lock);
+ INIT_LIST_HEAD(&ua->ready_playback_urbs);
+ spin_unlock_irq(&ua->lock);
+
+ /*
+ * We submit the initial URBs all at once, so we have to wait for the
+ * packet size FIFO to be full.
+ */
+ wait_event(ua->rate_feedback_wait,
+ ua->rate_feedback_count >= ua->playback.queue_length ||
+ !test_bit(USB_CAPTURE_RUNNING, &ua->states) ||
+ test_bit(DISCONNECTED, &ua->states));
+ if (test_bit(DISCONNECTED, &ua->states)) {
+ stop_usb_playback(ua);
+ return -ENODEV;
+ }
+ if (!test_bit(USB_CAPTURE_RUNNING, &ua->states)) {
+ stop_usb_playback(ua);
+ return -EIO;
+ }
+
+ for (i = 0; i < ua->playback.queue_length; ++i) {
+ /* all initial URBs contain silence */
+ spin_lock_irq(&ua->lock);
+ frames = ua->rate_feedback[ua->rate_feedback_start];
+ add_with_wraparound(ua, &ua->rate_feedback_start, 1);
+ ua->rate_feedback_count--;
+ spin_unlock_irq(&ua->lock);
+ urb = &ua->playback.urbs[i]->urb;
+ urb->iso_frame_desc[0].length =
+ frames * ua->playback.frame_bytes;
+ memset(urb->transfer_buffer, 0,
+ urb->iso_frame_desc[0].length);
+ }
+
+ set_bit(USB_PLAYBACK_RUNNING, &ua->states);
+ err = submit_stream_urbs(ua, &ua->playback);
+ if (err < 0)
+ stop_usb_playback(ua);
+ return err;
+}
+
+static void abort_alsa_capture(struct ua101 *ua)
+{
+ if (test_bit(ALSA_CAPTURE_RUNNING, &ua->states))
+ snd_pcm_stop(ua->capture.substream, SNDRV_PCM_STATE_XRUN);
+}
+
+static void abort_alsa_playback(struct ua101 *ua)
+{
+ if (test_bit(ALSA_PLAYBACK_RUNNING, &ua->states))
+ snd_pcm_stop(ua->playback.substream, SNDRV_PCM_STATE_XRUN);
+}
+
+static int set_stream_hw(struct ua101 *ua, struct snd_pcm_substream *substream,
+ unsigned int channels)
+{
+ int err;
+
+ substream->runtime->hw.info =
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_FIFO_IN_FRAMES;
+ substream->runtime->hw.formats = ua->format_bit;
+ substream->runtime->hw.rates = snd_pcm_rate_to_rate_bit(ua->rate);
+ substream->runtime->hw.rate_min = ua->rate;
+ substream->runtime->hw.rate_max = ua->rate;
+ substream->runtime->hw.channels_min = channels;
+ substream->runtime->hw.channels_max = channels;
+ substream->runtime->hw.buffer_bytes_max = 45000 * 1024;
+ substream->runtime->hw.period_bytes_min = 1;
+ substream->runtime->hw.period_bytes_max = UINT_MAX;
+ substream->runtime->hw.periods_min = 2;
+ substream->runtime->hw.periods_max = UINT_MAX;
+ err = snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 1500000 / ua->packets_per_second,
+ 8192000);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_constraint_msbits(substream->runtime, 0, 32, 24);
+ return err;
+}
+
+static int capture_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ ua->capture.substream = substream;
+ err = set_stream_hw(ua, substream, ua->capture.channels);
+ if (err < 0)
+ return err;
+ substream->runtime->hw.fifo_size =
+ DIV_ROUND_CLOSEST(ua->rate, ua->packets_per_second);
+ substream->runtime->delay = substream->runtime->hw.fifo_size;
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ if (err >= 0)
+ set_bit(ALSA_CAPTURE_OPEN, &ua->states);
+ mutex_unlock(&ua->mutex);
+ return err;
+}
+
+static int playback_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ ua->playback.substream = substream;
+ err = set_stream_hw(ua, substream, ua->playback.channels);
+ if (err < 0)
+ return err;
+ substream->runtime->hw.fifo_size =
+ DIV_ROUND_CLOSEST(ua->rate * ua->playback.queue_length,
+ ua->packets_per_second);
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ if (err < 0)
+ goto error;
+ err = start_usb_playback(ua);
+ if (err < 0) {
+ if (!test_bit(ALSA_CAPTURE_OPEN, &ua->states))
+ stop_usb_capture(ua);
+ goto error;
+ }
+ set_bit(ALSA_PLAYBACK_OPEN, &ua->states);
+error:
+ mutex_unlock(&ua->mutex);
+ return err;
+}
+
+static int capture_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+
+ mutex_lock(&ua->mutex);
+ clear_bit(ALSA_CAPTURE_OPEN, &ua->states);
+ if (!test_bit(ALSA_PLAYBACK_OPEN, &ua->states))
+ stop_usb_capture(ua);
+ mutex_unlock(&ua->mutex);
+ return 0;
+}
+
+static int playback_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+
+ mutex_lock(&ua->mutex);
+ stop_usb_playback(ua);
+ clear_bit(ALSA_PLAYBACK_OPEN, &ua->states);
+ if (!test_bit(ALSA_CAPTURE_OPEN, &ua->states))
+ stop_usb_capture(ua);
+ mutex_unlock(&ua->mutex);
+ return 0;
+}
+
+static int capture_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ mutex_unlock(&ua->mutex);
+ if (err < 0)
+ return err;
+
+ return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
+}
+
+static int playback_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ if (err >= 0)
+ err = start_usb_playback(ua);
+ mutex_unlock(&ua->mutex);
+ if (err < 0)
+ return err;
+
+ return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
+}
+
+static int ua101_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
+}
+
+static int capture_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ mutex_unlock(&ua->mutex);
+ if (err < 0)
+ return err;
+
+ /*
+ * The EHCI driver schedules the first packet of an iso stream at 10 ms
+ * in the future, i.e., no data is actually captured for that long.
+ * Take the wait here so that the stream is known to be actually
+ * running when the start trigger has been called.
+ */
+ wait_event(ua->alsa_capture_wait,
+ test_bit(CAPTURE_URB_COMPLETED, &ua->states) ||
+ !test_bit(USB_CAPTURE_RUNNING, &ua->states));
+ if (test_bit(DISCONNECTED, &ua->states))
+ return -ENODEV;
+ if (!test_bit(USB_CAPTURE_RUNNING, &ua->states))
+ return -EIO;
+
+ ua->capture.period_pos = 0;
+ ua->capture.buffer_pos = 0;
+ return 0;
+}
+
+static int playback_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct ua101 *ua = substream->private_data;
+ int err;
+
+ mutex_lock(&ua->mutex);
+ err = start_usb_capture(ua);
+ if (err >= 0)
+ err = start_usb_playback(ua);
+ mutex_unlock(&ua->mutex);
+ if (err < 0)
+ return err;
+
+ /* see the comment in capture_pcm_prepare() */
+ wait_event(ua->alsa_playback_wait,
+ test_bit(PLAYBACK_URB_COMPLETED, &ua->states) ||
+ !test_bit(USB_PLAYBACK_RUNNING, &ua->states));
+ if (test_bit(DISCONNECTED, &ua->states))
+ return -ENODEV;
+ if (!test_bit(USB_PLAYBACK_RUNNING, &ua->states))
+ return -EIO;
+
+ substream->runtime->delay = 0;
+ ua->playback.period_pos = 0;
+ ua->playback.buffer_pos = 0;
+ return 0;
+}
+
+static int capture_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct ua101 *ua = substream->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (!test_bit(USB_CAPTURE_RUNNING, &ua->states))
+ return -EIO;
+ set_bit(ALSA_CAPTURE_RUNNING, &ua->states);
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ clear_bit(ALSA_CAPTURE_RUNNING, &ua->states);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int playback_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct ua101 *ua = substream->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (!test_bit(USB_PLAYBACK_RUNNING, &ua->states))
+ return -EIO;
+ set_bit(ALSA_PLAYBACK_RUNNING, &ua->states);
+ return 0;
+ case SNDRV_PCM_TRIGGER_STOP:
+ clear_bit(ALSA_PLAYBACK_RUNNING, &ua->states);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static inline snd_pcm_uframes_t ua101_pcm_pointer(struct ua101 *ua,
+ struct ua101_stream *stream)
+{
+ unsigned long flags;
+ unsigned int pos;
+
+ spin_lock_irqsave(&ua->lock, flags);
+ pos = stream->buffer_pos;
+ spin_unlock_irqrestore(&ua->lock, flags);
+ return pos;
+}
+
+static snd_pcm_uframes_t capture_pcm_pointer(struct snd_pcm_substream *subs)
+{
+ struct ua101 *ua = subs->private_data;
+
+ return ua101_pcm_pointer(ua, &ua->capture);
+}
+
+static snd_pcm_uframes_t playback_pcm_pointer(struct snd_pcm_substream *subs)
+{
+ struct ua101 *ua = subs->private_data;
+
+ return ua101_pcm_pointer(ua, &ua->playback);
+}
+
+static struct snd_pcm_ops capture_pcm_ops = {
+ .open = capture_pcm_open,
+ .close = capture_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = capture_pcm_hw_params,
+ .hw_free = ua101_pcm_hw_free,
+ .prepare = capture_pcm_prepare,
+ .trigger = capture_pcm_trigger,
+ .pointer = capture_pcm_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static struct snd_pcm_ops playback_pcm_ops = {
+ .open = playback_pcm_open,
+ .close = playback_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = playback_pcm_hw_params,
+ .hw_free = ua101_pcm_hw_free,
+ .prepare = playback_pcm_prepare,
+ .trigger = playback_pcm_trigger,
+ .pointer = playback_pcm_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static const struct uac_format_type_i_discrete_descriptor *
+find_format_descriptor(struct usb_interface *interface)
+{
+ struct usb_host_interface *alt;
+ u8 *extra;
+ int extralen;
+
+ if (interface->num_altsetting != 2) {
+ dev_err(&interface->dev, "invalid num_altsetting\n");
+ return NULL;
+ }
+
+ alt = &interface->altsetting[0];
+ if (alt->desc.bNumEndpoints != 0) {
+ dev_err(&interface->dev, "invalid bNumEndpoints\n");
+ return NULL;
+ }
+
+ alt = &interface->altsetting[1];
+ if (alt->desc.bNumEndpoints != 1) {
+ dev_err(&interface->dev, "invalid bNumEndpoints\n");
+ return NULL;
+ }
+
+ extra = alt->extra;
+ extralen = alt->extralen;
+ while (extralen >= sizeof(struct usb_descriptor_header)) {
+ struct uac_format_type_i_discrete_descriptor *desc;
+
+ desc = (struct uac_format_type_i_discrete_descriptor *)extra;
+ if (desc->bLength > extralen) {
+ dev_err(&interface->dev, "descriptor overflow\n");
+ return NULL;
+ }
+ if (desc->bLength == UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1) &&
+ desc->bDescriptorType == USB_DT_CS_INTERFACE &&
+ desc->bDescriptorSubtype == UAC_FORMAT_TYPE) {
+ if (desc->bFormatType != UAC_FORMAT_TYPE_I_PCM ||
+ desc->bSamFreqType != 1) {
+ dev_err(&interface->dev,
+ "invalid format type\n");
+ return NULL;
+ }
+ return desc;
+ }
+ extralen -= desc->bLength;
+ extra += desc->bLength;
+ }
+ dev_err(&interface->dev, "sample format descriptor not found\n");
+ return NULL;
+}
+
+static int detect_usb_format(struct ua101 *ua)
+{
+ const struct uac_format_type_i_discrete_descriptor *fmt_capture;
+ const struct uac_format_type_i_discrete_descriptor *fmt_playback;
+ const struct usb_endpoint_descriptor *epd;
+ unsigned int rate2;
+
+ fmt_capture = find_format_descriptor(ua->intf[INTF_CAPTURE]);
+ fmt_playback = find_format_descriptor(ua->intf[INTF_PLAYBACK]);
+ if (!fmt_capture || !fmt_playback)
+ return -ENXIO;
+
+ switch (fmt_capture->bSubframeSize) {
+ case 3:
+ ua->format_bit = SNDRV_PCM_FMTBIT_S24_3LE;
+ break;
+ case 4:
+ ua->format_bit = SNDRV_PCM_FMTBIT_S32_LE;
+ break;
+ default:
+ dev_err(&ua->dev->dev, "sample width is not 24 or 32 bits\n");
+ return -ENXIO;
+ }
+ if (fmt_capture->bSubframeSize != fmt_playback->bSubframeSize) {
+ dev_err(&ua->dev->dev,
+ "playback/capture sample widths do not match\n");
+ return -ENXIO;
+ }
+
+ if (fmt_capture->bBitResolution != 24 ||
+ fmt_playback->bBitResolution != 24) {
+ dev_err(&ua->dev->dev, "sample width is not 24 bits\n");
+ return -ENXIO;
+ }
+
+ ua->rate = combine_triple(fmt_capture->tSamFreq[0]);
+ rate2 = combine_triple(fmt_playback->tSamFreq[0]);
+ if (ua->rate != rate2) {
+ dev_err(&ua->dev->dev,
+ "playback/capture rates do not match: %u/%u\n",
+ rate2, ua->rate);
+ return -ENXIO;
+ }
+
+ switch (ua->dev->speed) {
+ case USB_SPEED_FULL:
+ ua->packets_per_second = 1000;
+ break;
+ case USB_SPEED_HIGH:
+ ua->packets_per_second = 8000;
+ break;
+ default:
+ dev_err(&ua->dev->dev, "unknown device speed\n");
+ return -ENXIO;
+ }
+
+ ua->capture.channels = fmt_capture->bNrChannels;
+ ua->playback.channels = fmt_playback->bNrChannels;
+ ua->capture.frame_bytes =
+ fmt_capture->bSubframeSize * ua->capture.channels;
+ ua->playback.frame_bytes =
+ fmt_playback->bSubframeSize * ua->playback.channels;
+
+ epd = &ua->intf[INTF_CAPTURE]->altsetting[1].endpoint[0].desc;
+ if (!usb_endpoint_is_isoc_in(epd)) {
+ dev_err(&ua->dev->dev, "invalid capture endpoint\n");
+ return -ENXIO;
+ }
+ ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, usb_endpoint_num(epd));
+ ua->capture.max_packet_bytes = le16_to_cpu(epd->wMaxPacketSize);
+
+ epd = &ua->intf[INTF_PLAYBACK]->altsetting[1].endpoint[0].desc;
+ if (!usb_endpoint_is_isoc_out(epd)) {
+ dev_err(&ua->dev->dev, "invalid playback endpoint\n");
+ return -ENXIO;
+ }
+ ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, usb_endpoint_num(epd));
+ ua->playback.max_packet_bytes = le16_to_cpu(epd->wMaxPacketSize);
+ return 0;
+}
+
+static int alloc_stream_buffers(struct ua101 *ua, struct ua101_stream *stream)
+{
+ unsigned int remaining_packets, packets, packets_per_page, i;
+ size_t size;
+
+ stream->queue_length = queue_length;
+ stream->queue_length = max(stream->queue_length,
+ (unsigned int)MIN_QUEUE_LENGTH);
+ stream->queue_length = min(stream->queue_length,
+ (unsigned int)MAX_QUEUE_LENGTH);
+
+ /*
+ * The cache pool sizes used by usb_buffer_alloc() (128, 512, 2048) are
+ * quite bad when used with the packet sizes of this device (e.g. 280,
+ * 520, 624). Therefore, we allocate and subdivide entire pages, using
+ * a smaller buffer only for the last chunk.
+ */
+ remaining_packets = stream->queue_length;
+ packets_per_page = PAGE_SIZE / stream->max_packet_bytes;
+ for (i = 0; i < ARRAY_SIZE(stream->buffers); ++i) {
+ packets = min(remaining_packets, packets_per_page);
+ size = packets * stream->max_packet_bytes;
+ stream->buffers[i].addr =
+ usb_buffer_alloc(ua->dev, size, GFP_KERNEL,
+ &stream->buffers[i].dma);
+ if (!stream->buffers[i].addr)
+ return -ENOMEM;
+ stream->buffers[i].size = size;
+ remaining_packets -= packets;
+ if (!remaining_packets)
+ break;
+ }
+ if (remaining_packets) {
+ dev_err(&ua->dev->dev, "too many packets\n");
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static void free_stream_buffers(struct ua101 *ua, struct ua101_stream *stream)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(stream->buffers); ++i)
+ usb_buffer_free(ua->dev,
+ stream->buffers[i].size,
+ stream->buffers[i].addr,
+ stream->buffers[i].dma);
+}
+
+static int alloc_stream_urbs(struct ua101 *ua, struct ua101_stream *stream,
+ void (*urb_complete)(struct urb *))
+{
+ unsigned max_packet_size = stream->max_packet_bytes;
+ struct ua101_urb *urb;
+ unsigned int b, u = 0;
+
+ for (b = 0; b < ARRAY_SIZE(stream->buffers); ++b) {
+ unsigned int size = stream->buffers[b].size;
+ u8 *addr = stream->buffers[b].addr;
+ dma_addr_t dma = stream->buffers[b].dma;
+
+ while (size >= max_packet_size) {
+ if (u >= stream->queue_length)
+ goto bufsize_error;
+ urb = kmalloc(sizeof(*urb), GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+ usb_init_urb(&urb->urb);
+ urb->urb.dev = ua->dev;
+ urb->urb.pipe = stream->usb_pipe;
+ urb->urb.transfer_flags = URB_ISO_ASAP |
+ URB_NO_TRANSFER_DMA_MAP;
+ urb->urb.transfer_buffer = addr;
+ urb->urb.transfer_dma = dma;
+ urb->urb.transfer_buffer_length = max_packet_size;
+ urb->urb.number_of_packets = 1;
+ urb->urb.interval = 1;
+ urb->urb.context = ua;
+ urb->urb.complete = urb_complete;
+ urb->urb.iso_frame_desc[0].offset = 0;
+ urb->urb.iso_frame_desc[0].length = max_packet_size;
+ stream->urbs[u++] = urb;
+ size -= max_packet_size;
+ addr += max_packet_size;
+ dma += max_packet_size;
+ }
+ }
+ if (u == stream->queue_length)
+ return 0;
+bufsize_error:
+ dev_err(&ua->dev->dev, "internal buffer size error\n");
+ return -ENXIO;
+}
+
+static void free_stream_urbs(struct ua101_stream *stream)
+{
+ unsigned int i;
+
+ for (i = 0; i < stream->queue_length; ++i)
+ kfree(stream->urbs[i]);
+}
+
+static void free_usb_related_resources(struct ua101 *ua,
+ struct usb_interface *interface)
+{
+ unsigned int i;
+
+ free_stream_urbs(&ua->capture);
+ free_stream_urbs(&ua->playback);
+ free_stream_buffers(ua, &ua->capture);
+ free_stream_buffers(ua, &ua->playback);
+
+ for (i = 0; i < ARRAY_SIZE(ua->intf); ++i)
+ if (ua->intf[i]) {
+ usb_set_intfdata(ua->intf[i], NULL);
+ if (ua->intf[i] != interface)
+ usb_driver_release_interface(&ua101_driver,
+ ua->intf[i]);
+ }
+}
+
+static void ua101_card_free(struct snd_card *card)
+{
+ struct ua101 *ua = card->private_data;
+
+ mutex_destroy(&ua->mutex);
+}
+
+static int ua101_probe(struct usb_interface *interface,
+ const struct usb_device_id *usb_id)
+{
+ static const struct snd_usb_midi_endpoint_info midi_ep = {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ };
+ static const struct snd_usb_audio_quirk midi_quirk = {
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = &midi_ep
+ };
+ struct snd_card *card;
+ struct ua101 *ua;
+ unsigned int card_index, i;
+ char usb_path[32];
+ int err;
+
+ if (interface->altsetting->desc.bInterfaceNumber != 0)
+ return -ENODEV;
+
+ mutex_lock(&devices_mutex);
+
+ for (card_index = 0; card_index < SNDRV_CARDS; ++card_index)
+ if (enable[card_index] && !(devices_used & (1 << card_index)))
+ break;
+ if (card_index >= SNDRV_CARDS) {
+ mutex_unlock(&devices_mutex);
+ return -ENOENT;
+ }
+ err = snd_card_create(index[card_index], id[card_index], THIS_MODULE,
+ sizeof(*ua), &card);
+ if (err < 0) {
+ mutex_unlock(&devices_mutex);
+ return err;
+ }
+ card->private_free = ua101_card_free;
+ ua = card->private_data;
+ ua->dev = interface_to_usbdev(interface);
+ ua->card = card;
+ ua->card_index = card_index;
+ INIT_LIST_HEAD(&ua->midi_list);
+ spin_lock_init(&ua->lock);
+ mutex_init(&ua->mutex);
+ INIT_LIST_HEAD(&ua->ready_playback_urbs);
+ tasklet_init(&ua->playback_tasklet,
+ playback_tasklet, (unsigned long)ua);
+ init_waitqueue_head(&ua->alsa_capture_wait);
+ init_waitqueue_head(&ua->rate_feedback_wait);
+ init_waitqueue_head(&ua->alsa_playback_wait);
+
+#ifdef UA1A_HACK
+ if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
+ ua->intf[2] = interface;
+ ua->intf[0] = usb_ifnum_to_if(ua->dev, 1);
+ ua->intf[1] = usb_ifnum_to_if(ua->dev, 2);
+ usb_driver_claim_interface(&ua101_driver, ua->intf[0], ua);
+ usb_driver_claim_interface(&ua101_driver, ua->intf[1], ua);
+ } else {
+#endif
+ ua->intf[0] = interface;
+ for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
+ ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+ if (!ua->intf[i]) {
+ dev_err(&ua->dev->dev, "interface %u not found\n", i);
+ err = -ENXIO;
+ goto probe_error;
+ }
+ err = usb_driver_claim_interface(&ua101_driver,
+ ua->intf[i], ua);
+ if (err < 0) {
+ ua->intf[i] = NULL;
+ err = -EBUSY;
+ goto probe_error;
+ }
+ }
+#ifdef UA1A_HACK
+ }
+#endif
+
+ snd_card_set_dev(card, &interface->dev);
+
+#ifdef UA1A_HACK
+ if (ua->dev->descriptor.idProduct == cpu_to_le16(0x0018)) {
+ ua->format_bit = SNDRV_PCM_FMTBIT_S16_LE;
+ ua->rate = 44100;
+ ua->packets_per_second = 1000;
+ ua->capture.channels = 2;
+ ua->playback.channels = 2;
+ ua->capture.frame_bytes = 4;
+ ua->playback.frame_bytes = 4;
+ ua->capture.usb_pipe = usb_rcvisocpipe(ua->dev, 2);
+ ua->playback.usb_pipe = usb_sndisocpipe(ua->dev, 1);
+ ua->capture.max_packet_bytes = 192;
+ ua->playback.max_packet_bytes = 192;
+ } else {
+#endif
+ err = detect_usb_format(ua);
+ if (err < 0)
+ goto probe_error;
+#ifdef UA1A_HACK
+ }
+#endif
+
+ strcpy(card->driver, "UA-101");
+ strcpy(card->shortname, "UA-101");
+ usb_make_path(ua->dev, usb_path, sizeof(usb_path));
+ snprintf(ua->card->longname, sizeof(ua->card->longname),
+ "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+ ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
+ ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
+
+ err = alloc_stream_buffers(ua, &ua->capture);
+ if (err < 0)
+ goto probe_error;
+ err = alloc_stream_buffers(ua, &ua->playback);
+ if (err < 0)
+ goto probe_error;
+
+ err = alloc_stream_urbs(ua, &ua->capture, capture_urb_complete);
+ if (err < 0)
+ goto probe_error;
+ err = alloc_stream_urbs(ua, &ua->playback, playback_urb_complete);
+ if (err < 0)
+ goto probe_error;
+
+ err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+ if (err < 0)
+ goto probe_error;
+ ua->pcm->private_data = ua;
+ strcpy(ua->pcm->name, "UA-101");
+ snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
+ snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
+
+#ifdef UA1A_HACK
+ if (ua->dev->descriptor.idProduct != cpu_to_le16(0x0018)) {
+#endif
+ err = snd_usbmidi_create(card, ua->intf[INTF_MIDI],
+ &ua->midi_list, &midi_quirk);
+ if (err < 0)
+ goto probe_error;
+#ifdef UA1A_HACK
+ }
+#endif
+
+ err = snd_card_register(card);
+ if (err < 0)
+ goto probe_error;
+
+ usb_set_intfdata(interface, ua);
+ devices_used |= 1 << card_index;
+
+ mutex_unlock(&devices_mutex);
+ return 0;
+
+probe_error:
+ free_usb_related_resources(ua, interface);
+ snd_card_free(card);
+ mutex_unlock(&devices_mutex);
+ return err;
+}
+
+static void ua101_disconnect(struct usb_interface *interface)
+{
+ struct ua101 *ua = usb_get_intfdata(interface);
+ struct list_head *midi;
+
+ if (!ua)
+ return;
+
+ mutex_lock(&devices_mutex);
+
+ set_bit(DISCONNECTED, &ua->states);
+ wake_up(&ua->rate_feedback_wait);
+
+ /* make sure that userspace cannot create new requests */
+ snd_card_disconnect(ua->card);
+
+ /* make sure that there are no pending USB requests */
+ __list_for_each(midi, &ua->midi_list)
+ snd_usbmidi_disconnect(midi);
+ abort_alsa_playback(ua);
+ abort_alsa_capture(ua);
+ mutex_lock(&ua->mutex);
+ stop_usb_playback(ua);
+ stop_usb_capture(ua);
+ mutex_unlock(&ua->mutex);
+
+ free_usb_related_resources(ua, interface);
+
+ devices_used &= ~(1 << ua->card_index);
+
+ snd_card_free_when_closed(ua->card);
+
+ mutex_unlock(&devices_mutex);
+}
+
+static struct usb_device_id ua101_ids[] = {
+#ifdef UA1A_HACK
+ { USB_DEVICE(0x0582, 0x0018) },
+#endif
+ { USB_DEVICE(0x0582, 0x007d) },
+ { USB_DEVICE(0x0582, 0x008d) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ua101_ids);
+
+static struct usb_driver ua101_driver = {
+ .name = "snd-ua101",
+ .id_table = ua101_ids,
+ .probe = ua101_probe,
+ .disconnect = ua101_disconnect,
+#if 0
+ .suspend = ua101_suspend,
+ .resume = ua101_resume,
+#endif
+};
+
+static int __init alsa_card_ua101_init(void)
+{
+ return usb_register(&ua101_driver);
+}
+
+static void __exit alsa_card_ua101_exit(void)
+{
+ usb_deregister(&ua101_driver);
+ mutex_destroy(&devices_mutex);
+}
+
+module_init(alsa_card_ua101_init);
+module_exit(alsa_card_ua101_exit);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 9edef46..c539f7f 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -44,9 +44,11 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/usb.h>
-#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/ch9.h>
+
#include <sound/core.h>
#include <sound/info.h>
#include <sound/pcm.h>
@@ -170,11 +172,12 @@
unsigned int curpacksize; /* current packet size in bytes (for capture) */
unsigned int curframesize; /* current packet size in frames (for capture) */
unsigned int fill_max: 1; /* fill max packet size always */
+ unsigned int txfr_quirk:1; /* allow sub-frame alignment */
unsigned int fmt_type; /* USB audio format type (1-3) */
unsigned int running: 1; /* running status */
- unsigned int hwptr_done; /* processed frame position in the buffer */
+ unsigned int hwptr_done; /* processed byte position in the buffer */
unsigned int transfer_done; /* processed frames since last period update */
unsigned long active_mask; /* bitmask of active urbs */
unsigned long unlink_mask; /* bitmask of unlinked urbs */
@@ -343,7 +346,7 @@
unsigned long flags;
unsigned char *cp;
int i;
- unsigned int stride, len, oldptr;
+ unsigned int stride, frames, bytes, oldptr;
int period_elapsed = 0;
stride = runtime->frame_bits >> 3;
@@ -354,29 +357,39 @@
snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
// continue;
}
- len = urb->iso_frame_desc[i].actual_length / stride;
- if (! len)
- continue;
+ bytes = urb->iso_frame_desc[i].actual_length;
+ frames = bytes / stride;
+ if (!subs->txfr_quirk)
+ bytes = frames * stride;
+ if (bytes % (runtime->sample_bits >> 3) != 0) {
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ int oldbytes = bytes;
+#endif
+ bytes = frames * stride;
+ snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
+ oldbytes, bytes);
+ }
/* update the current pointer */
spin_lock_irqsave(&subs->lock, flags);
oldptr = subs->hwptr_done;
- subs->hwptr_done += len;
- if (subs->hwptr_done >= runtime->buffer_size)
- subs->hwptr_done -= runtime->buffer_size;
- subs->transfer_done += len;
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+ frames = (bytes + (oldptr % stride)) / stride;
+ subs->transfer_done += frames;
if (subs->transfer_done >= runtime->period_size) {
subs->transfer_done -= runtime->period_size;
period_elapsed = 1;
}
spin_unlock_irqrestore(&subs->lock, flags);
/* copy a data chunk */
- if (oldptr + len > runtime->buffer_size) {
- unsigned int cnt = runtime->buffer_size - oldptr;
- unsigned int blen = cnt * stride;
- memcpy(runtime->dma_area + oldptr * stride, cp, blen);
- memcpy(runtime->dma_area, cp + blen, len * stride - blen);
+ if (oldptr + bytes > runtime->buffer_size * stride) {
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - oldptr;
+ memcpy(runtime->dma_area + oldptr, cp, bytes1);
+ memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
} else {
- memcpy(runtime->dma_area + oldptr * stride, cp, len * stride);
+ memcpy(runtime->dma_area + oldptr, cp, bytes);
}
}
if (period_elapsed)
@@ -563,34 +576,34 @@
struct snd_pcm_runtime *runtime,
struct urb *urb)
{
- int i, stride, offs;
- unsigned int counts;
+ int i, stride;
+ unsigned int counts, frames, bytes;
unsigned long flags;
int period_elapsed = 0;
struct snd_urb_ctx *ctx = urb->context;
stride = runtime->frame_bits >> 3;
- offs = 0;
+ frames = 0;
urb->dev = ctx->subs->dev; /* we need to set this at each time */
urb->number_of_packets = 0;
spin_lock_irqsave(&subs->lock, flags);
for (i = 0; i < ctx->packets; i++) {
counts = snd_usb_audio_next_packet_size(subs);
/* set up descriptor */
- urb->iso_frame_desc[i].offset = offs * stride;
+ urb->iso_frame_desc[i].offset = frames * stride;
urb->iso_frame_desc[i].length = counts * stride;
- offs += counts;
+ frames += counts;
urb->number_of_packets++;
subs->transfer_done += counts;
if (subs->transfer_done >= runtime->period_size) {
subs->transfer_done -= runtime->period_size;
period_elapsed = 1;
- if (subs->fmt_type == USB_FORMAT_TYPE_II) {
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
if (subs->transfer_done > 0) {
/* FIXME: fill-max mode is not
* supported yet */
- offs -= subs->transfer_done;
+ frames -= subs->transfer_done;
counts -= subs->transfer_done;
urb->iso_frame_desc[i].length =
counts * stride;
@@ -600,7 +613,7 @@
if (i < ctx->packets) {
/* add a transfer delimiter */
urb->iso_frame_desc[i].offset =
- offs * stride;
+ frames * stride;
urb->iso_frame_desc[i].length = 0;
urb->number_of_packets++;
}
@@ -610,26 +623,25 @@
if (period_elapsed) /* finish at the period boundary */
break;
}
- if (subs->hwptr_done + offs > runtime->buffer_size) {
+ bytes = frames * stride;
+ if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
/* err, the transferred area goes over buffer boundary. */
- unsigned int len = runtime->buffer_size - subs->hwptr_done;
+ unsigned int bytes1 =
+ runtime->buffer_size * stride - subs->hwptr_done;
memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done * stride,
- len * stride);
- memcpy(urb->transfer_buffer + len * stride,
- runtime->dma_area,
- (offs - len) * stride);
+ runtime->dma_area + subs->hwptr_done, bytes1);
+ memcpy(urb->transfer_buffer + bytes1,
+ runtime->dma_area, bytes - bytes1);
} else {
memcpy(urb->transfer_buffer,
- runtime->dma_area + subs->hwptr_done * stride,
- offs * stride);
+ runtime->dma_area + subs->hwptr_done, bytes);
}
- subs->hwptr_done += offs;
- if (subs->hwptr_done >= runtime->buffer_size)
- subs->hwptr_done -= runtime->buffer_size;
- runtime->delay += offs;
+ subs->hwptr_done += bytes;
+ if (subs->hwptr_done >= runtime->buffer_size * stride)
+ subs->hwptr_done -= runtime->buffer_size * stride;
+ runtime->delay += frames;
spin_unlock_irqrestore(&subs->lock, flags);
- urb->transfer_buffer_length = offs * stride;
+ urb->transfer_buffer_length = bytes;
if (period_elapsed)
snd_pcm_period_elapsed(subs->pcm_substream);
return 0;
@@ -735,41 +747,6 @@
}
-/* get the physical page pointer at the given offset */
-static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
- unsigned long offset)
-{
- void *pageptr = subs->runtime->dma_area + offset;
- return vmalloc_to_page(pageptr);
-}
-
-/* allocate virtual buffer; may be called more than once */
-static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t size)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
- if (runtime->dma_area) {
- if (runtime->dma_bytes >= size)
- return 0; /* already large enough */
- vfree(runtime->dma_area);
- }
- runtime->dma_area = vmalloc_user(size);
- if (!runtime->dma_area)
- return -ENOMEM;
- runtime->dma_bytes = size;
- return 0;
-}
-
-/* free virtual buffer; may be called more than once */
-static int snd_pcm_free_vmalloc_buffer(struct snd_pcm_substream *subs)
-{
- struct snd_pcm_runtime *runtime = subs->runtime;
-
- vfree(runtime->dma_area);
- runtime->dma_area = NULL;
- return 0;
-}
-
-
/*
* unlink active urbs.
*/
@@ -937,18 +914,18 @@
/*
- * return the current pcm pointer. just return the hwptr_done value.
+ * return the current pcm pointer. just based on the hwptr_done value.
*/
static snd_pcm_uframes_t snd_usb_pcm_pointer(struct snd_pcm_substream *substream)
{
struct snd_usb_substream *subs;
- snd_pcm_uframes_t hwptr_done;
+ unsigned int hwptr_done;
subs = (struct snd_usb_substream *)substream->runtime->private_data;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
spin_unlock(&subs->lock);
- return hwptr_done;
+ return hwptr_done / (substream->runtime->frame_bits >> 3);
}
@@ -1130,7 +1107,7 @@
u->packets = (i + 1) * total_packs / subs->nurbs
- i * total_packs / subs->nurbs;
u->buffer_size = maxsize * u->packets;
- if (subs->fmt_type == USB_FORMAT_TYPE_II)
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
if (!u->urb)
@@ -1206,7 +1183,7 @@
if (i >= fp->nr_rates)
continue;
}
- attr = fp->ep_attr & EP_ATTR_MASK;
+ attr = fp->ep_attr & USB_ENDPOINT_SYNCTYPE;
if (! found) {
found = fp;
cur_attr = attr;
@@ -1218,14 +1195,14 @@
* M-audio audiophile USB.
*/
if (attr != cur_attr) {
- if ((attr == EP_ATTR_ASYNC &&
+ if ((attr == USB_ENDPOINT_SYNC_ASYNC &&
subs->direction == SNDRV_PCM_STREAM_PLAYBACK) ||
- (attr == EP_ATTR_ADAPTIVE &&
+ (attr == USB_ENDPOINT_SYNC_ADAPTIVE &&
subs->direction == SNDRV_PCM_STREAM_CAPTURE))
continue;
- if ((cur_attr == EP_ATTR_ASYNC &&
+ if ((cur_attr == USB_ENDPOINT_SYNC_ASYNC &&
subs->direction == SNDRV_PCM_STREAM_PLAYBACK) ||
- (cur_attr == EP_ATTR_ADAPTIVE &&
+ (cur_attr == USB_ENDPOINT_SYNC_ADAPTIVE &&
subs->direction == SNDRV_PCM_STREAM_CAPTURE)) {
found = fp;
cur_attr = attr;
@@ -1255,11 +1232,11 @@
ep = get_endpoint(alts, 0)->bEndpointAddress;
/* if endpoint has pitch control, enable it */
- if (fmt->attributes & EP_CS_ATTR_PITCH_CONTROL) {
+ if (fmt->attributes & UAC_EP_CS_ATTR_PITCH_CONTROL) {
data[0] = 1;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- PITCH_CONTROL << 8, ep, data, 1, 1000)) < 0) {
+ UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep, data, 1, 1000)) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
dev->devnum, iface, ep);
return err;
@@ -1278,21 +1255,21 @@
ep = get_endpoint(alts, 0)->bEndpointAddress;
/* if endpoint has sampling rate control, set it */
- if (fmt->attributes & EP_CS_ATTR_SAMPLE_RATE) {
+ if (fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE) {
int crate;
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000)) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), GET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
- SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000)) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
@@ -1307,6 +1284,47 @@
}
/*
+ * For E-Mu 0404USB/0202USB/TrackerPre sample rate should be set for device,
+ * not for interface.
+ */
+static void set_format_emu_quirk(struct snd_usb_substream *subs,
+ struct audioformat *fmt)
+{
+ unsigned char emu_samplerate_id = 0;
+
+ /* When capture is active
+ * sample rate shouldn't be changed
+ * by playback substream
+ */
+ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
+ return;
+ }
+
+ switch (fmt->rate_min) {
+ case 48000:
+ emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
+ break;
+ case 88200:
+ emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
+ break;
+ case 96000:
+ emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
+ break;
+ case 176400:
+ emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
+ break;
+ case 192000:
+ emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
+ break;
+ default:
+ emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
+ break;
+ }
+ snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
+}
+
+/*
* find a matching format and set up the interface
*/
static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
@@ -1369,9 +1387,9 @@
* descriptors which fool us. if it has only one EP,
* assume it as adaptive-out or sync-in.
*/
- attr = fmt->ep_attr & EP_ATTR_MASK;
- if (((is_playback && attr == EP_ATTR_ASYNC) ||
- (! is_playback && attr == EP_ATTR_ADAPTIVE)) &&
+ attr = fmt->ep_attr & USB_ENDPOINT_SYNCTYPE;
+ if (((is_playback && attr == USB_ENDPOINT_SYNC_ASYNC) ||
+ (! is_playback && attr == USB_ENDPOINT_SYNC_ADAPTIVE)) &&
altsd->bNumEndpoints >= 2) {
/* check sync-pipe endpoint */
/* ... and check descriptor size before accessing bSynchAddress
@@ -1411,7 +1429,7 @@
}
/* always fill max packet size */
- if (fmt->attributes & EP_CS_ATTR_FILL_MAX)
+ if (fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX)
subs->fill_max = 1;
if ((err = init_usb_pitch(dev, subs->interface, alts, fmt)) < 0)
@@ -1419,6 +1437,14 @@
subs->cur_audiofmt = fmt;
+ switch (subs->stream->chip->usb_id) {
+ case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
+ case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
+ case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
+ set_format_emu_quirk(subs, fmt);
+ break;
+ }
+
#if 0
printk(KERN_DEBUG
"setting done: format = %d, rate = %d..%d, channels = %d\n",
@@ -1449,8 +1475,8 @@
unsigned int channels, rate, format;
int ret, changed;
- ret = snd_pcm_alloc_vmalloc_buffer(substream,
- params_buffer_bytes(hw_params));
+ ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
if (ret < 0)
return ret;
@@ -1507,7 +1533,7 @@
subs->period_bytes = 0;
if (!subs->stream->chip->shutdown)
release_substream_urbs(subs, 0);
- return snd_pcm_free_vmalloc_buffer(substream);
+ return snd_pcm_lib_free_vmalloc_buffer(substream);
}
/*
@@ -1861,7 +1887,7 @@
runtime->hw.channels_min = fp->channels;
if (runtime->hw.channels_max < fp->channels)
runtime->hw.channels_max = fp->channels;
- if (fp->fmt_type == USB_FORMAT_TYPE_II && fp->frame_size > 0) {
+ if (fp->fmt_type == UAC_FORMAT_TYPE_II && fp->frame_size > 0) {
/* FIXME: there might be more than one audio formats... */
runtime->hw.period_bytes_min = runtime->hw.period_bytes_max =
fp->frame_size;
@@ -1973,7 +1999,8 @@
.prepare = snd_usb_pcm_prepare,
.trigger = snd_usb_pcm_playback_trigger,
.pointer = snd_usb_pcm_pointer,
- .page = snd_pcm_get_vmalloc_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
static struct snd_pcm_ops snd_usb_capture_ops = {
@@ -1985,7 +2012,8 @@
.prepare = snd_usb_pcm_prepare,
.trigger = snd_usb_pcm_capture_trigger,
.pointer = snd_usb_pcm_pointer,
- .page = snd_pcm_get_vmalloc_page,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
};
@@ -2093,7 +2121,7 @@
#include "usbquirks.h"
{ .match_flags = (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS),
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL },
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL },
{ } /* Terminating entry */
};
@@ -2132,7 +2160,7 @@
snd_iprintf(buffer, " Endpoint: %d %s (%s)\n",
fp->endpoint & USB_ENDPOINT_NUMBER_MASK,
fp->endpoint & USB_DIR_IN ? "IN" : "OUT",
- sync_types[(fp->ep_attr & EP_ATTR_MASK) >> 2]);
+ sync_types[(fp->ep_attr & USB_ENDPOINT_SYNCTYPE) >> 2]);
if (fp->rates & SNDRV_PCM_RATE_CONTINUOUS) {
snd_iprintf(buffer, " Rates: %d - %d (continuous)\n",
fp->rate_min, fp->rate_max);
@@ -2227,6 +2255,7 @@
subs->stream = as;
subs->direction = stream;
subs->dev = as->chip->dev;
+ subs->txfr_quirk = as->chip->txfr_quirk;
if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) {
subs->ops = audio_urb_ops[stream];
} else {
@@ -2394,29 +2423,68 @@
* @format: the format tag (wFormatTag)
* @fmt: the format type descriptor
*/
-static int parse_audio_format_i_type(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt)
+static int parse_audio_format_i_type(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ int format, void *_fmt,
+ int protocol)
{
- int pcm_format;
+ int pcm_format, i;
int sample_width, sample_bytes;
+ switch (protocol) {
+ case UAC_VERSION_1: {
+ struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
+ sample_width = fmt->bBitResolution;
+ sample_bytes = fmt->bSubframeSize;
+ break;
+ }
+
+ case UAC_VERSION_2: {
+ struct uac_format_type_i_ext_descriptor *fmt = _fmt;
+ sample_width = fmt->bBitResolution;
+ sample_bytes = fmt->bSubslotSize;
+
+ /*
+ * FIXME
+ * USB audio class v2 devices specify a bitmap of possible
+ * audio formats rather than one fix value. For now, we just
+ * pick one of them and report that as the only possible
+ * value for this setting.
+ * The bit allocation map is in fact compatible to the
+ * wFormatTag of the v1 AS streaming descriptors, which is why
+ * we can simply map the matrix.
+ */
+
+ for (i = 0; i < 5; i++)
+ if (format & (1UL << i)) {
+ format = i + 1;
+ break;
+ }
+
+ break;
+ }
+
+ default:
+ return -EINVAL;
+ }
+
/* FIXME: correct endianess and sign? */
pcm_format = -1;
- sample_width = fmt[6];
- sample_bytes = fmt[5];
+
switch (format) {
- case 0: /* some devices don't define this correctly... */
+ case UAC_FORMAT_TYPE_I_UNDEFINED: /* some devices don't define this correctly... */
snd_printdd(KERN_INFO "%d:%u:%d : format type 0 is detected, processed as PCM\n",
chip->dev->devnum, fp->iface, fp->altsetting);
/* fall-through */
- case USB_AUDIO_FORMAT_PCM:
+ case UAC_FORMAT_TYPE_I_PCM:
if (sample_width > sample_bytes * 8) {
snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n",
chip->dev->devnum, fp->iface, fp->altsetting,
sample_width, sample_bytes);
}
/* check the format byte size */
- switch (fmt[5]) {
+ printk(" XXXXX SAMPLE BYTES %d\n", sample_bytes);
+ switch (sample_bytes) {
case 1:
pcm_format = SNDRV_PCM_FORMAT_S8;
break;
@@ -2437,12 +2505,12 @@
break;
default:
snd_printk(KERN_INFO "%d:%u:%d : unsupported sample bitwidth %d in %d bytes\n",
- chip->dev->devnum, fp->iface,
- fp->altsetting, sample_width, sample_bytes);
+ chip->dev->devnum, fp->iface, fp->altsetting,
+ sample_width, sample_bytes);
break;
}
break;
- case USB_AUDIO_FORMAT_PCM8:
+ case UAC_FORMAT_TYPE_I_PCM8:
pcm_format = SNDRV_PCM_FORMAT_U8;
/* Dallas DS4201 workaround: it advertises U8 format, but really
@@ -2450,13 +2518,13 @@
if (chip->usb_id == USB_ID(0x04fa, 0x4201))
pcm_format = SNDRV_PCM_FORMAT_S8;
break;
- case USB_AUDIO_FORMAT_IEEE_FLOAT:
+ case UAC_FORMAT_TYPE_I_IEEE_FLOAT:
pcm_format = SNDRV_PCM_FORMAT_FLOAT_LE;
break;
- case USB_AUDIO_FORMAT_ALAW:
+ case UAC_FORMAT_TYPE_I_ALAW:
pcm_format = SNDRV_PCM_FORMAT_A_LAW;
break;
- case USB_AUDIO_FORMAT_MU_LAW:
+ case UAC_FORMAT_TYPE_I_MULAW:
pcm_format = SNDRV_PCM_FORMAT_MU_LAW;
break;
default:
@@ -2470,7 +2538,7 @@
/*
* parse the format descriptor and stores the possible sample rates
- * on the audioformat table.
+ * on the audioformat table (audio class v1).
*
* @dev: usb device
* @fp: audioformat record
@@ -2478,13 +2546,13 @@
* @offset: the start offset of descriptor pointing the rate type
* (7 for type I and II, 8 for type II)
*/
-static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioformat *fp,
- unsigned char *fmt, int offset)
+static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audioformat *fp,
+ unsigned char *fmt, int offset)
{
int nr_rates = fmt[offset];
if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid FORMAT_TYPE desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
chip->dev->devnum, fp->iface, fp->altsetting);
return -1;
}
@@ -2535,14 +2603,87 @@
}
/*
+ * parse the format descriptor and stores the possible sample rates
+ * on the audioformat table (audio class v2).
+ */
+static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ struct usb_host_interface *iface)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned char tmp[2], *data;
+ int i, nr_rates, data_size, ret = 0;
+
+ /* get the number of sample rates first by only fetching 2 bytes */
+ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ 0x0100, chip->clock_id << 8, tmp, sizeof(tmp), 1000);
+
+ if (ret < 0) {
+ snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+ goto err;
+ }
+
+ nr_rates = (tmp[1] << 8) | tmp[0];
+ data_size = 2 + 12 * nr_rates;
+ data = kzalloc(data_size, GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* now get the full information */
+ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ 0x0100, chip->clock_id << 8, data, data_size, 1000);
+
+ if (ret < 0) {
+ snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+ ret = -EINVAL;
+ goto err_free;
+ }
+
+ fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+ if (!fp->rate_table) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ fp->nr_rates = 0;
+ fp->rate_min = fp->rate_max = 0;
+
+ for (i = 0; i < nr_rates; i++) {
+ int rate = combine_quad(&data[2 + 12 * i]);
+
+ fp->rate_table[fp->nr_rates] = rate;
+ if (!fp->rate_min || rate < fp->rate_min)
+ fp->rate_min = rate;
+ if (!fp->rate_max || rate > fp->rate_max)
+ fp->rate_max = rate;
+ fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+ fp->nr_rates++;
+ }
+
+err_free:
+ kfree(data);
+err:
+ return ret;
+}
+
+/*
* parse the format type I and III descriptors
*/
-static int parse_audio_format_i(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt)
+static int parse_audio_format_i(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ int format, void *_fmt,
+ struct usb_host_interface *iface)
{
- int pcm_format;
+ struct usb_interface_descriptor *altsd = get_iface_desc(iface);
+ struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
+ int protocol = altsd->bInterfaceProtocol;
+ int pcm_format, ret;
- if (fmt[3] == USB_FORMAT_TYPE_III) {
+ if (fmt->bFormatType == UAC_FORMAT_TYPE_III) {
/* FIXME: the format type is really IECxxx
* but we give normal PCM format to get the existing
* apps working...
@@ -2560,34 +2701,57 @@
pcm_format = SNDRV_PCM_FORMAT_S16_LE;
}
} else {
- pcm_format = parse_audio_format_i_type(chip, fp, format, fmt);
+ pcm_format = parse_audio_format_i_type(chip, fp, format, fmt, protocol);
if (pcm_format < 0)
return -1;
}
+
fp->format = pcm_format;
- fp->channels = fmt[4];
+
+ /* gather possible sample rates */
+ /* audio class v1 reports possible sample rates as part of the
+ * proprietary class specific descriptor.
+ * audio class v2 uses class specific EP0 range requests for that.
+ */
+ switch (protocol) {
+ case UAC_VERSION_1:
+ fp->channels = fmt->bNrChannels;
+ ret = parse_audio_format_rates_v1(chip, fp, _fmt, 7);
+ break;
+ case UAC_VERSION_2:
+ /* fp->channels is already set in this case */
+ ret = parse_audio_format_rates_v2(chip, fp, iface);
+ break;
+ }
+
if (fp->channels < 1) {
snd_printk(KERN_ERR "%d:%u:%d : invalid channels %d\n",
chip->dev->devnum, fp->iface, fp->altsetting, fp->channels);
return -1;
}
- return parse_audio_format_rates(chip, fp, fmt, 7);
+
+ return ret;
}
/*
- * prase the format type II descriptor
+ * parse the format type II descriptor
*/
-static int parse_audio_format_ii(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt)
+static int parse_audio_format_ii(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ int format, void *_fmt,
+ struct usb_host_interface *iface)
{
- int brate, framesize;
+ int brate, framesize, ret;
+ struct usb_interface_descriptor *altsd = get_iface_desc(iface);
+ int protocol = altsd->bInterfaceProtocol;
+
switch (format) {
- case USB_AUDIO_FORMAT_AC3:
+ case UAC_FORMAT_TYPE_II_AC3:
/* FIXME: there is no AC3 format defined yet */
// fp->format = SNDRV_PCM_FORMAT_AC3;
fp->format = SNDRV_PCM_FORMAT_U8; /* temporarily hack to receive byte streams */
break;
- case USB_AUDIO_FORMAT_MPEG:
+ case UAC_FORMAT_TYPE_II_MPEG:
fp->format = SNDRV_PCM_FORMAT_MPEG;
break;
default:
@@ -2596,26 +2760,46 @@
fp->format = SNDRV_PCM_FORMAT_MPEG;
break;
}
+
fp->channels = 1;
- brate = combine_word(&fmt[4]); /* fmt[4,5] : wMaxBitRate (in kbps) */
- framesize = combine_word(&fmt[6]); /* fmt[6,7]: wSamplesPerFrame */
- snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
- fp->frame_size = framesize;
- return parse_audio_format_rates(chip, fp, fmt, 8); /* fmt[8..] sample rates */
+
+ switch (protocol) {
+ case UAC_VERSION_1: {
+ struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
+ brate = le16_to_cpu(fmt->wMaxBitRate);
+ framesize = le16_to_cpu(fmt->wSamplesPerFrame);
+ snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
+ fp->frame_size = framesize;
+ ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */
+ break;
+ }
+ case UAC_VERSION_2: {
+ struct uac_format_type_ii_ext_descriptor *fmt = _fmt;
+ brate = le16_to_cpu(fmt->wMaxBitRate);
+ framesize = le16_to_cpu(fmt->wSamplesPerFrame);
+ snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
+ fp->frame_size = framesize;
+ ret = parse_audio_format_rates_v2(chip, fp, iface);
+ break;
+ }
+ }
+
+ return ret;
}
static int parse_audio_format(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt, int stream)
+ int format, unsigned char *fmt, int stream,
+ struct usb_host_interface *iface)
{
int err;
switch (fmt[3]) {
- case USB_FORMAT_TYPE_I:
- case USB_FORMAT_TYPE_III:
- err = parse_audio_format_i(chip, fp, format, fmt);
+ case UAC_FORMAT_TYPE_I:
+ case UAC_FORMAT_TYPE_III:
+ err = parse_audio_format_i(chip, fp, format, fmt, iface);
break;
- case USB_FORMAT_TYPE_II:
- err = parse_audio_format_ii(chip, fp, format, fmt);
+ case UAC_FORMAT_TYPE_II:
+ err = parse_audio_format_ii(chip, fp, format, fmt, iface);
break;
default:
snd_printd(KERN_INFO "%d:%u:%d : format type %d is not supported yet\n",
@@ -2633,7 +2817,7 @@
if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
chip->usb_id == USB_ID(0x041e, 0x3020) ||
chip->usb_id == USB_ID(0x041e, 0x3061)) {
- if (fmt[3] == USB_FORMAT_TYPE_I &&
+ if (fmt[3] == UAC_FORMAT_TYPE_I &&
fp->rates != SNDRV_PCM_RATE_48000 &&
fp->rates != SNDRV_PCM_RATE_96000)
return -1;
@@ -2662,10 +2846,10 @@
struct usb_host_interface *alts;
struct usb_interface_descriptor *altsd;
int i, altno, err, stream;
- int format;
+ int format = 0, num_channels = 0;
struct audioformat *fp = NULL;
unsigned char *fmt, *csep;
- int num;
+ int num, protocol;
dev = chip->dev;
@@ -2684,10 +2868,11 @@
for (i = 0; i < num; i++) {
alts = &iface->altsetting[i];
altsd = get_iface_desc(alts);
+ protocol = altsd->bInterfaceProtocol;
/* skip invalid one */
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIO_STREAMING &&
+ (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
altsd->bNumEndpoints < 1 ||
le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
@@ -2708,30 +2893,65 @@
continue;
/* get audio formats */
- fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, AS_GENERAL);
- if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
- continue;
+ switch (protocol) {
+ case UAC_VERSION_1: {
+ struct uac_as_header_descriptor_v1 *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ format = le16_to_cpu(as->wFormatTag); /* remember the format value */
+ break;
}
- if (fmt[0] < 7) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
- continue;
+ case UAC_VERSION_2: {
+ struct uac_as_header_descriptor_v2 *as =
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+
+ if (!as) {
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ if (as->bLength < sizeof(*as)) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
+ dev->devnum, iface_no, altno);
+ continue;
+ }
+
+ num_channels = as->bNrChannels;
+ format = le32_to_cpu(as->bmFormats);
+
+ break;
}
- format = (fmt[6] << 8) | fmt[5]; /* remember the format value */
+ default:
+ snd_printk(KERN_ERR "%d:%u:%d : unknown interface protocol %04x\n",
+ dev->devnum, iface_no, altno, protocol);
+ continue;
+ }
/* get format type */
- fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, FORMAT_TYPE);
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : no FORMAT_TYPE desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
dev->devnum, iface_no, altno);
continue;
}
- if (fmt[0] < 8) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid FORMAT_TYPE desc\n",
+ if (((protocol == UAC_VERSION_1) && (fmt[0] < 8)) ||
+ ((protocol == UAC_VERSION_2) && (fmt[0] != 6))) {
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
dev->devnum, iface_no, altno);
continue;
}
@@ -2744,6 +2964,7 @@
if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
fp && fp->altsetting == 1 && fp->channels == 1 &&
fp->format == SNDRV_PCM_FORMAT_S16_LE &&
+ protocol == UAC_VERSION_1 &&
le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
fp->maxpacksize * 2)
continue;
@@ -2752,7 +2973,7 @@
/* Creamware Noah has this descriptor after the 2nd endpoint */
if (!csep && altsd->bNumEndpoints >= 2)
csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
- if (!csep || csep[0] < 7 || csep[2] != EP_GENERAL) {
+ if (!csep || csep[0] < 7 || csep[2] != UAC_EP_GENERAL) {
snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
" class specific endpoint descriptor\n",
dev->devnum, iface_no, altno);
@@ -2772,6 +2993,8 @@
fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
fp->datainterval = parse_datainterval(chip, alts);
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+ /* num_channels is only set for v2 interfaces */
+ fp->channels = num_channels;
if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
* (fp->maxpacksize & 0x7ff);
@@ -2784,12 +3007,12 @@
/* Optoplay sets the sample rate attribute although
* it seems not supporting it in fact.
*/
- fp->attributes &= ~EP_CS_ATTR_SAMPLE_RATE;
+ fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
break;
case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
/* doesn't set the sample rate attribute, but supports it */
- fp->attributes |= EP_CS_ATTR_SAMPLE_RATE;
+ fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
break;
case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
@@ -2798,16 +3021,16 @@
* plantronics headset and Griffin iMic have set adaptive-in
* although it's really not...
*/
- fp->ep_attr &= ~EP_ATTR_MASK;
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
- fp->ep_attr |= EP_ATTR_ADAPTIVE;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
else
- fp->ep_attr |= EP_ATTR_SYNC;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
break;
}
/* ok, let's parse further... */
- if (parse_audio_format(chip, fp, format, fmt, stream) < 0) {
+ if (parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
kfree(fp->rate_table);
kfree(fp);
continue;
@@ -2849,6 +3072,65 @@
}
}
+static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int interface)
+{
+ struct usb_device *dev = chip->dev;
+ struct usb_host_interface *alts;
+ struct usb_interface_descriptor *altsd;
+ struct usb_interface *iface = usb_ifnum_to_if(dev, interface);
+
+ if (!iface) {
+ snd_printk(KERN_ERR "%d:%u:%d : does not exist\n",
+ dev->devnum, ctrlif, interface);
+ return -EINVAL;
+ }
+
+ if (usb_interface_claimed(iface)) {
+ snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n",
+ dev->devnum, ctrlif, interface);
+ return -EINVAL;
+ }
+
+ alts = &iface->altsetting[0];
+ altsd = get_iface_desc(alts);
+ if ((altsd->bInterfaceClass == USB_CLASS_AUDIO ||
+ altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) &&
+ altsd->bInterfaceSubClass == USB_SUBCLASS_MIDISTREAMING) {
+ int err = snd_usbmidi_create(chip->card, iface,
+ &chip->midi_list, NULL);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n",
+ dev->devnum, ctrlif, interface);
+ return -EINVAL;
+ }
+ usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
+
+ return 0;
+ }
+
+ if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
+ altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
+ altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING) {
+ snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n",
+ dev->devnum, ctrlif, interface, altsd->bInterfaceClass);
+ /* skip non-supported classes */
+ return -EINVAL;
+ }
+
+ if (snd_usb_get_speed(dev) == USB_SPEED_LOW) {
+ snd_printk(KERN_ERR "low speed audio streaming not supported\n");
+ return -EINVAL;
+ }
+
+ if (! parse_audio_endpoints(chip, interface)) {
+ usb_set_interface(dev, interface, 0); /* reset the current interface */
+ usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/*
* parse audio control descriptor and create pcm/midi streams
*/
@@ -2856,67 +3138,81 @@
{
struct usb_device *dev = chip->dev;
struct usb_host_interface *host_iface;
- struct usb_interface *iface;
- unsigned char *p1;
- int i, j;
+ struct usb_interface_descriptor *altsd;
+ void *control_header;
+ int i, protocol;
/* find audiocontrol interface */
host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0];
- if (!(p1 = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen, NULL, HEADER))) {
- snd_printk(KERN_ERR "cannot find HEADER\n");
- return -EINVAL;
- }
- if (! p1[7] || p1[0] < 8 + p1[7]) {
- snd_printk(KERN_ERR "invalid HEADER\n");
+ control_header = snd_usb_find_csint_desc(host_iface->extra,
+ host_iface->extralen,
+ NULL, UAC_HEADER);
+ altsd = get_iface_desc(host_iface);
+ protocol = altsd->bInterfaceProtocol;
+
+ if (!control_header) {
+ snd_printk(KERN_ERR "cannot find UAC_HEADER\n");
return -EINVAL;
}
- /*
- * parse all USB audio streaming interfaces
- */
- for (i = 0; i < p1[7]; i++) {
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- j = p1[8 + i];
- iface = usb_ifnum_to_if(dev, j);
- if (!iface) {
- snd_printk(KERN_ERR "%d:%u:%d : does not exist\n",
- dev->devnum, ctrlif, j);
- continue;
+ switch (protocol) {
+ case UAC_VERSION_1: {
+ struct uac_ac_header_descriptor_v1 *h1 = control_header;
+
+ if (!h1->bInCollection) {
+ snd_printk(KERN_INFO "skipping empty audio interface (v1)\n");
+ return -EINVAL;
}
- if (usb_interface_claimed(iface)) {
- snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n", dev->devnum, ctrlif, j);
- continue;
+
+ if (h1->bLength < sizeof(*h1) + h1->bInCollection) {
+ snd_printk(KERN_ERR "invalid UAC_HEADER (v1)\n");
+ return -EINVAL;
}
- alts = &iface->altsetting[0];
- altsd = get_iface_desc(alts);
- if ((altsd->bInterfaceClass == USB_CLASS_AUDIO ||
- altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) &&
- altsd->bInterfaceSubClass == USB_SUBCLASS_MIDI_STREAMING) {
- int err = snd_usbmidi_create(chip->card, iface,
- &chip->midi_list, NULL);
- if (err < 0) {
- snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n", dev->devnum, ctrlif, j);
- continue;
- }
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
- continue;
+
+ for (i = 0; i < h1->bInCollection; i++)
+ snd_usb_create_stream(chip, ctrlif, h1->baInterfaceNr[i]);
+
+ break;
+ }
+
+ case UAC_VERSION_2: {
+ struct uac_clock_source_descriptor *cs;
+ struct usb_interface_assoc_descriptor *assoc =
+ usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
+
+ if (!assoc) {
+ snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
+ return -EINVAL;
}
- if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
- altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIO_STREAMING) {
- snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n", dev->devnum, ctrlif, j, altsd->bInterfaceClass);
- /* skip non-supported classes */
- continue;
+
+ /* FIXME: for now, we expect there is at least one clock source
+ * descriptor and we always take the first one.
+ * We should properly support devices with multiple clock sources,
+ * clock selectors and sample rate conversion units. */
+
+ cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
+ NULL, UAC_CLOCK_SOURCE);
+
+ if (!cs) {
+ snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
+ return -EINVAL;
}
- if (snd_usb_get_speed(dev) == USB_SPEED_LOW) {
- snd_printk(KERN_ERR "low speed audio streaming not supported\n");
- continue;
+
+ chip->clock_id = cs->bClockID;
+
+ for (i = 0; i < assoc->bInterfaceCount; i++) {
+ int intf = assoc->bFirstInterface + i;
+
+ if (intf != ctrlif)
+ snd_usb_create_stream(chip, ctrlif, intf);
}
- if (! parse_audio_endpoints(chip, j)) {
- usb_set_interface(dev, j, 0); /* reset the current interface */
- usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
- }
+
+ break;
+ }
+
+ default:
+ snd_printk(KERN_ERR "unknown protocol version 0x%02x\n", protocol);
+ return -EINVAL;
}
return 0;
@@ -3007,7 +3303,7 @@
static const struct audioformat ua_format = {
.format = SNDRV_PCM_FORMAT_S24_3LE,
.channels = 2,
- .fmt_type = USB_FORMAT_TYPE_I,
+ .fmt_type = UAC_FORMAT_TYPE_I,
.altsetting = 1,
.altset_idx = 1,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
@@ -3099,7 +3395,7 @@
{
static const struct audioformat ua1000_format = {
.format = SNDRV_PCM_FORMAT_S32_LE,
- .fmt_type = USB_FORMAT_TYPE_I,
+ .fmt_type = UAC_FORMAT_TYPE_I,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
@@ -3142,59 +3438,6 @@
return 0;
}
-/*
- * Create a stream for an Edirol UA-101 interface.
- * Copy, paste and modify from Edirol UA-1000
- */
-static int create_ua101_quirk(struct snd_usb_audio *chip,
- struct usb_interface *iface,
- const struct snd_usb_audio_quirk *quirk)
-{
- static const struct audioformat ua101_format = {
- .format = SNDRV_PCM_FORMAT_S32_LE,
- .fmt_type = USB_FORMAT_TYPE_I,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- };
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- struct audioformat *fp;
- int stream, err;
-
- if (iface->num_altsetting != 2)
- return -ENXIO;
- alts = &iface->altsetting[1];
- altsd = get_iface_desc(alts);
- if (alts->extralen != 18 || alts->extra[1] != USB_DT_CS_INTERFACE ||
- altsd->bNumEndpoints != 1)
- return -ENXIO;
-
- fp = kmemdup(&ua101_format, sizeof(*fp), GFP_KERNEL);
- if (!fp)
- return -ENOMEM;
-
- fp->channels = alts->extra[11];
- fp->iface = altsd->bInterfaceNumber;
- fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
- fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
- fp->datainterval = parse_datainterval(chip, alts);
- fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
- fp->rate_max = fp->rate_min = combine_triple(&alts->extra[15]);
-
- stream = (fp->endpoint & USB_DIR_IN)
- ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = add_audio_endpoint(chip, stream, fp);
- if (err < 0) {
- kfree(fp);
- return err;
- }
- /* FIXME: playback must be synchronized to capture */
- usb_set_interface(chip->dev, fp->iface, 0);
- return 0;
-}
-
static int snd_usb_create_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk);
@@ -3232,6 +3475,18 @@
return 0;
}
+/*
+ * Allow alignment on audio sub-slot (channel samples) rather than
+ * on audio slots (audio frames)
+ */
+static int create_align_transfer_quirk(struct snd_usb_audio *chip,
+ struct usb_interface *iface,
+ const struct snd_usb_audio_quirk *quirk)
+{
+ chip->txfr_quirk = 1;
+ return 1; /* Continue with creating streams and mixer */
+}
+
/*
* boot quirks
@@ -3327,6 +3582,32 @@
}
/*
+ * This call will put the synth in "USB send" mode, i.e it will send MIDI
+ * messages through USB (this is disabled at startup). The synth will
+ * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
+ * sign on its LCD. Values here are chosen based on sniffing USB traffic
+ * under Windows.
+ */
+static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
+{
+ int err, actual_length;
+
+ /* "midi send" enable */
+ static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
+
+ void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
+ ARRAY_SIZE(seq), &actual_length, 1000);
+ kfree(buf);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/*
* Setup quirks
*/
#define AUDIOPHILE_SET 0x01 /* if set, parse device_setup */
@@ -3406,8 +3687,8 @@
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
- [QUIRK_AUDIO_EDIROL_UA101] = create_ua101_quirk,
- [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk
+ [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
+ [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
};
if (quirk->type < QUIRK_TYPE_COUNT) {
@@ -3596,7 +3877,6 @@
ifnum = get_iface_desc(alts)->bInterfaceNumber;
id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
-
if (quirk && quirk->ifnum >= 0 && ifnum != quirk->ifnum)
goto __err_val;
@@ -3624,6 +3904,12 @@
goto __err_val;
}
+ /* Access Music VirusTI Desktop */
+ if (id == USB_ID(0x133e, 0x0815)) {
+ if (snd_usb_accessmusic_boot_quirk(dev) < 0)
+ goto __err_val;
+ }
+
/*
* found a config. now register to ALSA
*/
@@ -3661,6 +3947,7 @@
}
}
+ chip->txfr_quirk = 0;
err = 1; /* continue */
if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) {
/* need some special handlings */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 40ba811..6b016d4 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -21,93 +21,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
-/*
- */
-
-#define USB_SUBCLASS_AUDIO_CONTROL 0x01
-#define USB_SUBCLASS_AUDIO_STREAMING 0x02
-#define USB_SUBCLASS_MIDI_STREAMING 0x03
-#define USB_SUBCLASS_VENDOR_SPEC 0xff
-
-#define HEADER 0x01
-#define INPUT_TERMINAL 0x02
-#define OUTPUT_TERMINAL 0x03
-#define MIXER_UNIT 0x04
-#define SELECTOR_UNIT 0x05
-#define FEATURE_UNIT 0x06
-#define PROCESSING_UNIT 0x07
-#define EXTENSION_UNIT 0x08
-
-#define AS_GENERAL 0x01
-#define FORMAT_TYPE 0x02
-#define FORMAT_SPECIFIC 0x03
-
-#define EP_GENERAL 0x01
-
-#define MS_GENERAL 0x01
-#define MIDI_IN_JACK 0x02
-#define MIDI_OUT_JACK 0x03
-
-/* endpoint attributes */
-#define EP_ATTR_MASK 0x0c
-#define EP_ATTR_ASYNC 0x04
-#define EP_ATTR_ADAPTIVE 0x08
-#define EP_ATTR_SYNC 0x0c
-
-/* cs endpoint attributes */
-#define EP_CS_ATTR_SAMPLE_RATE 0x01
-#define EP_CS_ATTR_PITCH_CONTROL 0x02
-#define EP_CS_ATTR_FILL_MAX 0x80
-
-/* Audio Class specific Request Codes */
-
-#define SET_CUR 0x01
-#define GET_CUR 0x81
-#define SET_MIN 0x02
-#define GET_MIN 0x82
-#define SET_MAX 0x03
-#define GET_MAX 0x83
-#define SET_RES 0x04
-#define GET_RES 0x84
-#define SET_MEM 0x05
-#define GET_MEM 0x85
-#define GET_STAT 0xff
-
-/* Terminal Control Selectors */
-
-#define COPY_PROTECT_CONTROL 0x01
-
-/* Endpoint Control Selectors */
-
-#define SAMPLING_FREQ_CONTROL 0x01
-#define PITCH_CONTROL 0x02
-
-/* Format Types */
-#define USB_FORMAT_TYPE_I 0x01
-#define USB_FORMAT_TYPE_II 0x02
-#define USB_FORMAT_TYPE_III 0x03
-
-/* type I */
-#define USB_AUDIO_FORMAT_PCM 0x01
-#define USB_AUDIO_FORMAT_PCM8 0x02
-#define USB_AUDIO_FORMAT_IEEE_FLOAT 0x03
-#define USB_AUDIO_FORMAT_ALAW 0x04
-#define USB_AUDIO_FORMAT_MU_LAW 0x05
-
-/* type II */
-#define USB_AUDIO_FORMAT_MPEG 0x1001
-#define USB_AUDIO_FORMAT_AC3 0x1002
-
-/* type III */
-#define USB_AUDIO_FORMAT_IEC1937_AC3 0x2001
-#define USB_AUDIO_FORMAT_IEC1937_MPEG1_LAYER1 0x2002
-#define USB_AUDIO_FORMAT_IEC1937_MPEG2_NOEXT 0x2003
-#define USB_AUDIO_FORMAT_IEC1937_MPEG2_EXT 0x2004
-#define USB_AUDIO_FORMAT_IEC1937_MPEG2_LAYER1_LS 0x2005
-#define USB_AUDIO_FORMAT_IEC1937_MPEG2_LAYER23_LS 0x2006
-
-
/* maximum number of endpoints per interface */
#define MIDI_MAX_ENDPOINTS 2
@@ -125,9 +38,13 @@
struct snd_card *card;
u32 usb_id;
int shutdown;
+ unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */
int num_interfaces;
int num_suspended_intf;
+ /* for audio class v2 */
+ int clock_id;
+
struct list_head pcm_list; /* list of pcm streams */
int pcm_devs;
@@ -159,8 +76,8 @@
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UA1000,
- QUIRK_AUDIO_EDIROL_UA101,
QUIRK_AUDIO_EDIROL_UAXX,
+ QUIRK_AUDIO_ALIGN_TRANSFER,
QUIRK_TYPE_COUNT
};
@@ -209,6 +126,16 @@
/*
*/
+/*E-mu USB samplerate control quirk*/
+enum {
+ EMU_QUIRK_SR_44100HZ = 0,
+ EMU_QUIRK_SR_48000HZ,
+ EMU_QUIRK_SR_88200HZ,
+ EMU_QUIRK_SR_96000HZ,
+ EMU_QUIRK_SR_176400HZ,
+ EMU_QUIRK_SR_192000HZ
+};
+
#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8))
#define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16))
#define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24))
@@ -234,6 +161,9 @@
void snd_usbmidi_input_start(struct list_head* p);
void snd_usbmidi_disconnect(struct list_head *p);
+void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
+ unsigned char samplerate_id);
+
/*
* retrieve usb_interface descriptor from the host interface
* (conditional for compatibility with the older API)
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 6e89b83..2c59afd 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -46,6 +46,8 @@
#include <linux/timer.h>
#include <linux/usb.h>
#include <linux/wait.h>
+#include <linux/usb/audio.h>
+
#include <sound/core.h>
#include <sound/control.h>
#include <sound/rawmidi.h>
@@ -1162,10 +1164,22 @@
pipe = usb_sndintpipe(umidi->dev, ep_info->out_ep);
else
pipe = usb_sndbulkpipe(umidi->dev, ep_info->out_ep);
- if (umidi->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
- ep->max_transfer = 4;
- else
+ switch (umidi->usb_id) {
+ default:
ep->max_transfer = usb_maxpacket(umidi->dev, pipe, 1);
+ break;
+ /*
+ * Various chips declare a packet size larger than 4 bytes, but
+ * do not actually work with larger packets:
+ */
+ case USB_ID(0x0a92, 0x1020): /* ESI M4U */
+ case USB_ID(0x1430, 0x474b): /* RedOctane GH MIDI INTERFACE */
+ case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
+ case USB_ID(0x15ca, 0x1806): /* Textech USB Midi Cable */
+ case USB_ID(0x1a86, 0x752d): /* QinHeng CH345 "USB2.0-MIDI" */
+ ep->max_transfer = 4;
+ break;
+ }
for (i = 0; i < OUTPUT_URBS; ++i) {
buffer = usb_buffer_alloc(umidi->dev,
ep->max_transfer, GFP_KERNEL,
@@ -1407,6 +1421,12 @@
EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
+ /* Access Music Virus TI */
+ EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
+ PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
+ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SNDRV_SEQ_PORT_TYPE_HARDWARE |
+ SNDRV_SEQ_PORT_TYPE_SYNTHESIZER),
};
static struct port_info *find_port_info(struct snd_usb_midi* umidi, int number)
@@ -1522,7 +1542,7 @@
if (hostif->extralen >= 7 &&
ms_header->bLength >= 7 &&
ms_header->bDescriptorType == USB_DT_CS_INTERFACE &&
- ms_header->bDescriptorSubtype == HEADER)
+ ms_header->bDescriptorSubtype == UAC_HEADER)
snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n",
ms_header->bcdMSC[1], ms_header->bcdMSC[0]);
else
@@ -1538,7 +1558,7 @@
if (hostep->extralen < 4 ||
ms_ep->bLength < 4 ||
ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT ||
- ms_ep->bDescriptorSubtype != MS_GENERAL)
+ ms_ep->bDescriptorSubtype != UAC_MS_GENERAL)
continue;
if (usb_endpoint_dir_out(ep)) {
if (endpoints[epidx].out_ep) {
@@ -1750,9 +1770,9 @@
cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2;
cs_desc += cs_desc[0]) {
if (cs_desc[1] == USB_DT_CS_INTERFACE) {
- if (cs_desc[2] == MIDI_IN_JACK)
+ if (cs_desc[2] == UAC_MIDI_IN_JACK)
endpoint->in_cables = (endpoint->in_cables << 1) | 1;
- else if (cs_desc[2] == MIDI_OUT_JACK)
+ else if (cs_desc[2] == UAC_MIDI_OUT_JACK)
endpoint->out_cables = (endpoint->out_cables << 1) | 1;
}
}
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index c998220..8e8f871b 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -32,6 +32,8 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/usb.h>
+#include <linux/usb/audio.h>
+
#include <sound/core.h>
#include <sound/control.h>
#include <sound/hwdep.h>
@@ -69,13 +71,16 @@
{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6, 2, 0x6e91 }, /* Toshiba SB0500 */
};
+#define MAX_ID_ELEMS 256
+
struct usb_mixer_interface {
struct snd_usb_audio *chip;
unsigned int ctrlif;
struct list_head list;
unsigned int ignore_ctl_error;
struct urb *urb;
- struct usb_mixer_elem_info **id_elems; /* array[256], indexed by unit id */
+ /* array[MAX_ID_ELEMS], indexed by unit id */
+ struct usb_mixer_elem_info **id_elems;
/* Sound Blaster remote control stuff */
const struct rc_config *rc_cfg;
@@ -105,7 +110,7 @@
struct usb_mixer_interface *mixer;
unsigned char *buffer;
unsigned int buflen;
- DECLARE_BITMAP(unitbitmap, 256);
+ DECLARE_BITMAP(unitbitmap, MAX_ID_ELEMS);
struct usb_audio_term oterm;
const struct usbmix_name_map *map;
const struct usbmix_selector_map *selector_map;
@@ -123,6 +128,7 @@
int channels;
int val_type;
int min, max, res;
+ int dBmin, dBmax;
int cached;
int cache_val[MAX_CHANNELS];
u8 initialized;
@@ -186,6 +192,21 @@
USB_PROC_DCR_RELEASE = 6,
};
+/*E-mu 0202(0404) eXtension Unit(XU) control*/
+enum {
+ USB_XU_CLOCK_RATE = 0xe301,
+ USB_XU_CLOCK_SOURCE = 0xe302,
+ USB_XU_DIGITAL_IO_STATUS = 0xe303,
+ USB_XU_DEVICE_OPTIONS = 0xe304,
+ USB_XU_DIRECT_MONITORING = 0xe305,
+ USB_XU_METERING = 0xe306
+};
+enum {
+ USB_XU_CLOCK_SOURCE_SELECTOR = 0x02, /* clock source*/
+ USB_XU_CLOCK_RATE_SELECTOR = 0x03, /* clock rate */
+ USB_XU_DIGITAL_FORMAT_SELECTOR = 0x01, /* the spdif format */
+ USB_XU_SOFT_LIMIT_SELECTOR = 0x03 /* soft limiter */
+};
/*
* manual mapping of mixer names
@@ -194,42 +215,50 @@
*/
#include "usbmixer_maps.c"
-/* get the mapped name if the unit matches */
-static int check_mapped_name(struct mixer_build *state, int unitid, int control, char *buf, int buflen)
+static const struct usbmix_name_map *
+find_map(struct mixer_build *state, int unitid, int control)
{
- const struct usbmix_name_map *p;
+ const struct usbmix_name_map *p = state->map;
- if (! state->map)
- return 0;
+ if (!p)
+ return NULL;
for (p = state->map; p->id; p++) {
- if (p->id == unitid && p->name &&
- (! control || ! p->control || control == p->control)) {
- buflen--;
- return strlcpy(buf, p->name, buflen);
- }
+ if (p->id == unitid &&
+ (!control || !p->control || control == p->control))
+ return p;
}
- return 0;
+ return NULL;
+}
+
+/* get the mapped name if the unit matches */
+static int
+check_mapped_name(const struct usbmix_name_map *p, char *buf, int buflen)
+{
+ if (!p || !p->name)
+ return 0;
+
+ buflen--;
+ return strlcpy(buf, p->name, buflen);
}
/* check whether the control should be ignored */
-static int check_ignored_ctl(struct mixer_build *state, int unitid, int control)
+static inline int
+check_ignored_ctl(const struct usbmix_name_map *p)
{
- const struct usbmix_name_map *p;
-
- if (! state->map)
+ if (!p || p->name || p->dB)
return 0;
- for (p = state->map; p->id; p++) {
- if (p->id == unitid && ! p->name &&
- (! control || ! p->control || control == p->control)) {
- /*
- printk(KERN_DEBUG "ignored control %d:%d\n",
- unitid, control);
- */
- return 1;
- }
+ return 1;
+}
+
+/* dB mapping */
+static inline void check_mapped_dB(const struct usbmix_name_map *p,
+ struct usb_mixer_elem_info *cval)
+{
+ if (p && p->dB) {
+ cval->dBmin = p->dB->min;
+ cval->dBmax = p->dB->max;
}
- return 0;
}
/* get the mapped selector source name */
@@ -257,7 +286,7 @@
p = NULL;
while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
USB_DT_CS_INTERFACE)) != NULL) {
- if (p[0] >= 4 && p[2] >= INPUT_TERMINAL && p[2] <= EXTENSION_UNIT && p[3] == unit)
+ if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC_EXTENSION_UNIT_V1 && p[3] == unit)
return p;
}
return NULL;
@@ -378,14 +407,14 @@
static int get_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int *value)
{
- return get_ctl_value(cval, GET_CUR, validx, value);
+ return get_ctl_value(cval, UAC_GET_CUR, validx, value);
}
/* channel = 0: master, 1 = first channel */
static inline int get_cur_mix_raw(struct usb_mixer_elem_info *cval,
int channel, int *value)
{
- return get_ctl_value(cval, GET_CUR, (cval->control << 8) | channel, value);
+ return get_ctl_value(cval, UAC_GET_CUR, (cval->control << 8) | channel, value);
}
static int get_cur_mix_value(struct usb_mixer_elem_info *cval,
@@ -439,14 +468,14 @@
static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value)
{
- return set_ctl_value(cval, SET_CUR, validx, value);
+ return set_ctl_value(cval, UAC_SET_CUR, validx, value);
}
static int set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel,
int index, int value)
{
int err;
- err = set_ctl_value(cval, SET_CUR, (cval->control << 8) | channel,
+ err = set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
value);
if (err < 0)
return err;
@@ -466,20 +495,8 @@
if (size < sizeof(scale))
return -ENOMEM;
- /* USB descriptions contain the dB scale in 1/256 dB unit
- * while ALSA TLV contains in 1/100 dB unit
- */
- scale[2] = (convert_signed_value(cval, cval->min) * 100) / 256;
- scale[3] = (convert_signed_value(cval, cval->max) * 100) / 256;
- if (scale[3] <= scale[2]) {
- /* something is wrong; assume it's either from/to 0dB */
- if (scale[2] < 0)
- scale[3] = 0;
- else if (scale[2] > 0)
- scale[2] = 0;
- else /* totally crap, return an error */
- return -EINVAL;
- }
+ scale[2] = cval->dBmin;
+ scale[3] = cval->dBmax;
if (copy_to_user(_tlv, scale, sizeof(scale)))
return -EFAULT;
return 0;
@@ -588,13 +605,13 @@
if (term_only)
return 0;
switch (iterm->type >> 16) {
- case SELECTOR_UNIT:
+ case UAC_SELECTOR_UNIT:
strcpy(name, "Selector"); return 8;
- case PROCESSING_UNIT:
+ case UAC_PROCESSING_UNIT_V1:
strcpy(name, "Process Unit"); return 12;
- case EXTENSION_UNIT:
+ case UAC_EXTENSION_UNIT_V1:
strcpy(name, "Ext Unit"); return 8;
- case MIXER_UNIT:
+ case UAC_MIXER_UNIT:
strcpy(name, "Mixer"); return 5;
default:
return sprintf(name, "Unit %d", iterm->id);
@@ -633,22 +650,22 @@
while ((p1 = find_audio_control_unit(state, id)) != NULL) {
term->id = id;
switch (p1[2]) {
- case INPUT_TERMINAL:
+ case UAC_INPUT_TERMINAL:
term->type = combine_word(p1 + 4);
term->channels = p1[7];
term->chconfig = combine_word(p1 + 8);
term->name = p1[11];
return 0;
- case FEATURE_UNIT:
+ case UAC_FEATURE_UNIT:
id = p1[4];
break; /* continue to parse */
- case MIXER_UNIT:
+ case UAC_MIXER_UNIT:
term->type = p1[2] << 16; /* virtual type */
term->channels = p1[5 + p1[4]];
term->chconfig = combine_word(p1 + 6 + p1[4]);
term->name = p1[p1[0] - 1];
return 0;
- case SELECTOR_UNIT:
+ case UAC_SELECTOR_UNIT:
/* call recursively to retrieve the channel info */
if (check_input_term(state, p1[5], term) < 0)
return -ENODEV;
@@ -656,8 +673,8 @@
term->id = id;
term->name = p1[9 + p1[0] - 1];
return 0;
- case PROCESSING_UNIT:
- case EXTENSION_UNIT:
+ case UAC_PROCESSING_UNIT_V1:
+ case UAC_EXTENSION_UNIT_V1:
if (p1[6] == 1) {
id = p1[7];
break; /* continue to parse */
@@ -720,6 +737,7 @@
cval->min = default_min;
cval->max = cval->min + 1;
cval->res = 1;
+ cval->dBmin = cval->dBmax = 0;
if (cval->val_type == USB_MIXER_BOOLEAN ||
cval->val_type == USB_MIXER_INV_BOOLEAN) {
@@ -734,23 +752,23 @@
break;
}
}
- if (get_ctl_value(cval, GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
- get_ctl_value(cval, GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
+ if (get_ctl_value(cval, UAC_GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
+ get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
snd_printd(KERN_ERR "%d:%d: cannot get min/max values for control %d (id %d)\n",
cval->id, cval->mixer->ctrlif, cval->control, cval->id);
return -EINVAL;
}
- if (get_ctl_value(cval, GET_RES, (cval->control << 8) | minchn, &cval->res) < 0) {
+ if (get_ctl_value(cval, UAC_GET_RES, (cval->control << 8) | minchn, &cval->res) < 0) {
cval->res = 1;
} else {
int last_valid_res = cval->res;
while (cval->res > 1) {
- if (set_ctl_value(cval, SET_RES, (cval->control << 8) | minchn, cval->res / 2) < 0)
+ if (set_ctl_value(cval, UAC_SET_RES, (cval->control << 8) | minchn, cval->res / 2) < 0)
break;
cval->res /= 2;
}
- if (get_ctl_value(cval, GET_RES, (cval->control << 8) | minchn, &cval->res) < 0)
+ if (get_ctl_value(cval, UAC_GET_RES, (cval->control << 8) | minchn, &cval->res) < 0)
cval->res = last_valid_res;
}
if (cval->res == 0)
@@ -787,6 +805,24 @@
cval->initialized = 1;
}
+
+ /* USB descriptions contain the dB scale in 1/256 dB unit
+ * while ALSA TLV contains in 1/100 dB unit
+ */
+ cval->dBmin = (convert_signed_value(cval, cval->min) * 100) / 256;
+ cval->dBmax = (convert_signed_value(cval, cval->max) * 100) / 256;
+ if (cval->dBmin > cval->dBmax) {
+ /* something is wrong; assume it's either from/to 0dB */
+ if (cval->dBmin < 0)
+ cval->dBmax = 0;
+ else if (cval->dBmin > 0)
+ cval->dBmin = 0;
+ if (cval->dBmin > cval->dBmax) {
+ /* totally crap, return an error */
+ return -EINVAL;
+ }
+ }
+
return 0;
}
@@ -912,6 +948,7 @@
int nameid = desc[desc[0] - 1];
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *cval;
+ const struct usbmix_name_map *map;
control++; /* change from zero-based to 1-based value */
@@ -920,7 +957,8 @@
return;
}
- if (check_ignored_ctl(state, unitid, control))
+ map = find_map(state, unitid, control);
+ if (check_ignored_ctl(map))
return;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
@@ -954,10 +992,11 @@
}
kctl->private_free = usb_mixer_elem_free;
- len = check_mapped_name(state, unitid, control, kctl->id.name, sizeof(kctl->id.name));
+ len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
mapped_name = len != 0;
if (! len && nameid)
- len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name));
+ len = snd_usb_copy_string_desc(state, nameid,
+ kctl->id.name, sizeof(kctl->id.name));
switch (control) {
case USB_FEATURE_MUTE:
@@ -995,6 +1034,7 @@
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+ check_mapped_dB(map, cval);
}
break;
@@ -1048,29 +1088,30 @@
*
* most of controlls are defined here.
*/
-static int parse_audio_feature_unit(struct mixer_build *state, int unitid, unsigned char *ftr)
+static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void *_ftr)
{
int channels, i, j;
struct usb_audio_term iterm;
unsigned int master_bits, first_ch_bits;
int err, csize;
+ struct uac_feature_unit_descriptor *ftr = _ftr;
- if (ftr[0] < 7 || ! (csize = ftr[5]) || ftr[0] < 7 + csize) {
- snd_printk(KERN_ERR "usbaudio: unit %u: invalid FEATURE_UNIT descriptor\n", unitid);
+ if (ftr->bLength < 7 || ! (csize = ftr->bControlSize) || ftr->bLength < 7 + csize) {
+ snd_printk(KERN_ERR "usbaudio: unit %u: invalid UAC_FEATURE_UNIT descriptor\n", unitid);
return -EINVAL;
}
/* parse the source unit */
- if ((err = parse_audio_unit(state, ftr[4])) < 0)
+ if ((err = parse_audio_unit(state, ftr->bSourceID)) < 0)
return err;
/* determine the input source type and name */
- if (check_input_term(state, ftr[4], &iterm) < 0)
+ if (check_input_term(state, ftr->bSourceID, &iterm) < 0)
return -EINVAL;
- channels = (ftr[0] - 7) / csize - 1;
+ channels = (ftr->bLength - 7) / csize - 1;
- master_bits = snd_usb_combine_bytes(ftr + 6, csize);
+ master_bits = snd_usb_combine_bytes(ftr->controls, csize);
/* master configuration quirks */
switch (state->chip->usb_id) {
case USB_ID(0x08bb, 0x2702):
@@ -1081,21 +1122,21 @@
break;
}
if (channels > 0)
- first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize);
+ first_ch_bits = snd_usb_combine_bytes(ftr->controls + csize, csize);
else
first_ch_bits = 0;
/* check all control types */
for (i = 0; i < 10; i++) {
unsigned int ch_bits = 0;
for (j = 0; j < channels; j++) {
- unsigned int mask = snd_usb_combine_bytes(ftr + 6 + csize * (j+1), csize);
+ unsigned int mask = snd_usb_combine_bytes(ftr->controls + csize * (j+1), csize);
if (mask & (1 << i))
ch_bits |= (1 << j);
}
if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
- build_feature_ctl(state, ftr, ch_bits, i, &iterm, unitid);
+ build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid);
if (master_bits & (1 << i))
- build_feature_ctl(state, ftr, 0, i, &iterm, unitid);
+ build_feature_ctl(state, _ftr, 0, i, &iterm, unitid);
}
return 0;
@@ -1122,8 +1163,10 @@
unsigned int num_outs = desc[5 + input_pins];
unsigned int i, len;
struct snd_kcontrol *kctl;
+ const struct usbmix_name_map *map;
- if (check_ignored_ctl(state, unitid, 0))
+ map = find_map(state, unitid, 0);
+ if (check_ignored_ctl(map))
return;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
@@ -1152,7 +1195,7 @@
}
kctl->private_free = usb_mixer_elem_free;
- len = check_mapped_name(state, unitid, 0, kctl->id.name, sizeof(kctl->id.name));
+ len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
if (! len)
len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 0);
if (! len)
@@ -1330,7 +1373,32 @@
{ USB_PROC_DCR, "DCR", dcr_proc_info },
{ 0 },
};
-
+/*
+ * predefined data for extension units
+ */
+static struct procunit_value_info clock_rate_xu_info[] = {
+ { USB_XU_CLOCK_RATE_SELECTOR, "Selector", USB_MIXER_U8, 0 },
+ { 0 }
+};
+static struct procunit_value_info clock_source_xu_info[] = {
+ { USB_XU_CLOCK_SOURCE_SELECTOR, "External", USB_MIXER_BOOLEAN },
+ { 0 }
+};
+static struct procunit_value_info spdif_format_xu_info[] = {
+ { USB_XU_DIGITAL_FORMAT_SELECTOR, "SPDIF/AC3", USB_MIXER_BOOLEAN },
+ { 0 }
+};
+static struct procunit_value_info soft_limit_xu_info[] = {
+ { USB_XU_SOFT_LIMIT_SELECTOR, " ", USB_MIXER_BOOLEAN },
+ { 0 }
+};
+static struct procunit_info extunits[] = {
+ { USB_XU_CLOCK_RATE, "Clock rate", clock_rate_xu_info },
+ { USB_XU_CLOCK_SOURCE, "DigitalIn CLK source", clock_source_xu_info },
+ { USB_XU_DIGITAL_IO_STATUS, "DigitalOut format:", spdif_format_xu_info },
+ { USB_XU_DEVICE_OPTIONS, "AnalogueIn Soft Limit", soft_limit_xu_info },
+ { 0 }
+};
/*
* build a processing/extension unit
*/
@@ -1342,6 +1410,7 @@
int i, err, nameid, type, len;
struct procunit_info *info;
struct procunit_value_info *valinfo;
+ const struct usbmix_name_map *map;
static struct procunit_value_info default_value_info[] = {
{ 0x01, "Switch", USB_MIXER_BOOLEAN },
{ 0 }
@@ -1371,7 +1440,8 @@
/* FIXME: bitmap might be longer than 8bit */
if (! (dsc[12 + num_ins] & (1 << (valinfo->control - 1))))
continue;
- if (check_ignored_ctl(state, unitid, valinfo->control))
+ map = find_map(state, unitid, valinfo->control);
+ if (check_ignored_ctl(map))
continue;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (! cval) {
@@ -1391,8 +1461,18 @@
cval->max = dsc[15];
cval->res = 1;
cval->initialized = 1;
- } else
- get_min_max(cval, valinfo->min_value);
+ } else {
+ if (type == USB_XU_CLOCK_RATE) {
+ /* E-Mu USB 0404/0202/TrackerPre
+ * samplerate control quirk
+ */
+ cval->min = 0;
+ cval->max = 5;
+ cval->res = 1;
+ cval->initialized = 1;
+ } else
+ get_min_max(cval, valinfo->min_value);
+ }
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
if (! kctl) {
@@ -1402,8 +1482,9 @@
}
kctl->private_free = usb_mixer_elem_free;
- if (check_mapped_name(state, unitid, cval->control, kctl->id.name, sizeof(kctl->id.name)))
- ;
+ if (check_mapped_name(map, kctl->id.name,
+ sizeof(kctl->id.name)))
+ /* nothing */ ;
else if (info->name)
strlcpy(kctl->id.name, info->name, sizeof(kctl->id.name));
else {
@@ -1433,7 +1514,7 @@
static int parse_audio_extension_unit(struct mixer_build *state, int unitid, unsigned char *desc)
{
- return build_audio_procunit(state, unitid, desc, NULL, "Extension Unit");
+ return build_audio_procunit(state, unitid, desc, extunits, "Extension Unit");
}
@@ -1542,6 +1623,7 @@
int err;
struct usb_mixer_elem_info *cval;
struct snd_kcontrol *kctl;
+ const struct usbmix_name_map *map;
char **namelist;
if (! num_ins || desc[0] < 5 + num_ins) {
@@ -1557,7 +1639,8 @@
if (num_ins == 1) /* only one ? nonsense! */
return 0;
- if (check_ignored_ctl(state, unitid, 0))
+ map = find_map(state, unitid, 0);
+ if (check_ignored_ctl(map))
return 0;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
@@ -1612,7 +1695,7 @@
kctl->private_free = usb_mixer_selector_elem_free;
nameid = desc[desc[0] - 1];
- len = check_mapped_name(state, unitid, 0, kctl->id.name, sizeof(kctl->id.name));
+ len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
if (len)
;
else if (nameid)
@@ -1656,17 +1739,17 @@
}
switch (p1[2]) {
- case INPUT_TERMINAL:
+ case UAC_INPUT_TERMINAL:
return 0; /* NOP */
- case MIXER_UNIT:
+ case UAC_MIXER_UNIT:
return parse_audio_mixer_unit(state, unitid, p1);
- case SELECTOR_UNIT:
+ case UAC_SELECTOR_UNIT:
return parse_audio_selector_unit(state, unitid, p1);
- case FEATURE_UNIT:
+ case UAC_FEATURE_UNIT:
return parse_audio_feature_unit(state, unitid, p1);
- case PROCESSING_UNIT:
+ case UAC_PROCESSING_UNIT_V1:
return parse_audio_processing_unit(state, unitid, p1);
- case EXTENSION_UNIT:
+ case UAC_EXTENSION_UNIT_V1:
return parse_audio_extension_unit(state, unitid, p1);
default:
snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
@@ -1696,11 +1779,11 @@
/*
* create mixer controls
*
- * walk through all OUTPUT_TERMINAL descriptors to search for mixers
+ * walk through all UAC_OUTPUT_TERMINAL descriptors to search for mixers
*/
static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
{
- unsigned char *desc;
+ struct uac_output_terminal_descriptor_v1 *desc;
struct mixer_build state;
int err;
const struct usbmix_ctl_map *map;
@@ -1724,14 +1807,14 @@
}
desc = NULL;
- while ((desc = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, desc, OUTPUT_TERMINAL)) != NULL) {
- if (desc[0] < 9)
+ while ((desc = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, desc, UAC_OUTPUT_TERMINAL)) != NULL) {
+ if (desc->bLength < 9)
continue; /* invalid descriptor? */
- set_bit(desc[3], state.unitbitmap); /* mark terminal ID as visited */
- state.oterm.id = desc[3];
- state.oterm.type = combine_word(&desc[4]);
- state.oterm.name = desc[8];
- err = parse_audio_unit(&state, desc[7]);
+ set_bit(desc->bTerminalID, state.unitbitmap); /* mark terminal ID as visited */
+ state.oterm.id = desc->bTerminalID;
+ state.oterm.type = le16_to_cpu(desc->wTerminalType);
+ state.oterm.name = desc->iTerminal;
+ err = parse_audio_unit(&state, desc->bSourceID);
if (err < 0)
return err;
}
@@ -1748,6 +1831,46 @@
info->elem_id);
}
+static void snd_usb_mixer_dump_cval(struct snd_info_buffer *buffer,
+ int unitid,
+ struct usb_mixer_elem_info *cval)
+{
+ static char *val_types[] = {"BOOLEAN", "INV_BOOLEAN",
+ "S8", "U8", "S16", "U16"};
+ snd_iprintf(buffer, " Unit: %i\n", unitid);
+ if (cval->elem_id)
+ snd_iprintf(buffer, " Control: name=\"%s\", index=%i\n",
+ cval->elem_id->name, cval->elem_id->index);
+ snd_iprintf(buffer, " Info: id=%i, control=%i, cmask=0x%x, "
+ "channels=%i, type=\"%s\"\n", cval->id,
+ cval->control, cval->cmask, cval->channels,
+ val_types[cval->val_type]);
+ snd_iprintf(buffer, " Volume: min=%i, max=%i, dBmin=%i, dBmax=%i\n",
+ cval->min, cval->max, cval->dBmin, cval->dBmax);
+}
+
+static void snd_usb_mixer_proc_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct snd_usb_audio *chip = entry->private_data;
+ struct usb_mixer_interface *mixer;
+ struct usb_mixer_elem_info *cval;
+ int unitid;
+
+ list_for_each_entry(mixer, &chip->mixer_list, list) {
+ snd_iprintf(buffer,
+ "USB Mixer: usb_id=0x%08x, ctrlif=%i, ctlerr=%i\n",
+ chip->usb_id, mixer->ctrlif,
+ mixer->ignore_ctl_error);
+ snd_iprintf(buffer, "Card: %s\n", chip->card->longname);
+ for (unitid = 0; unitid < MAX_ID_ELEMS; unitid++) {
+ for (cval = mixer->id_elems[unitid]; cval;
+ cval = cval->next_id_elem)
+ snd_usb_mixer_dump_cval(buffer, unitid, cval);
+ }
+ }
+}
+
static void snd_usb_mixer_memory_change(struct usb_mixer_interface *mixer,
int unitid)
{
@@ -1924,7 +2047,7 @@
}
mixer->rc_setup_packet->bRequestType =
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
- mixer->rc_setup_packet->bRequest = GET_MEM;
+ mixer->rc_setup_packet->bRequest = UAC_GET_MEM;
mixer->rc_setup_packet->wValue = cpu_to_le16(0);
mixer->rc_setup_packet->wIndex = cpu_to_le16(0);
mixer->rc_setup_packet->wLength = cpu_to_le16(len);
@@ -2047,7 +2170,7 @@
snd_iprintf(buffer, "%s: ", jacks[i].name);
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
- GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
+ UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
jacks[i].unitid << 8, buf, 3, 100);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
@@ -2109,6 +2232,24 @@
return 0;
}
+void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
+ unsigned char samplerate_id)
+{
+ struct usb_mixer_interface *mixer;
+ struct usb_mixer_elem_info *cval;
+ int unitid = 12; /* SamleRate ExtensionUnit ID */
+
+ list_for_each_entry(mixer, &chip->mixer_list, list) {
+ cval = mixer->id_elems[unitid];
+ if (cval) {
+ set_cur_ctl_value(cval, cval->control << 8,
+ samplerate_id);
+ snd_usb_mixer_notify_id(mixer, unitid);
+ }
+ break;
+ }
+}
+
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
int ignore_error)
{
@@ -2116,7 +2257,9 @@
.dev_free = snd_usb_mixer_dev_free
};
struct usb_mixer_interface *mixer;
- int err;
+ struct snd_info_entry *entry;
+ struct usb_host_interface *host_iface;
+ int err, protocol;
strcpy(chip->card->mixername, "USB Mixer");
@@ -2126,12 +2269,23 @@
mixer->chip = chip;
mixer->ctrlif = ctrlif;
mixer->ignore_ctl_error = ignore_error;
- mixer->id_elems = kcalloc(256, sizeof(*mixer->id_elems), GFP_KERNEL);
+ mixer->id_elems = kcalloc(MAX_ID_ELEMS, sizeof(*mixer->id_elems),
+ GFP_KERNEL);
if (!mixer->id_elems) {
kfree(mixer);
return -ENOMEM;
}
+ host_iface = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0];
+ protocol = host_iface->desc.bInterfaceProtocol;
+
+ /* FIXME! */
+ if (protocol != UAC_VERSION_1) {
+ snd_printk(KERN_WARNING "mixer interface protocol 0x%02x not yet supported\n",
+ protocol);
+ return 0;
+ }
+
if ((err = snd_usb_mixer_controls(mixer)) < 0 ||
(err = snd_usb_mixer_status_create(mixer)) < 0)
goto _error;
@@ -2142,8 +2296,6 @@
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) {
- struct snd_info_entry *entry;
-
if ((err = snd_audigy2nx_controls_create(mixer)) < 0)
goto _error;
if (!snd_card_proc_new(chip->card, "audigy2nx", &entry))
@@ -2161,6 +2313,11 @@
err = snd_device_new(chip->card, SNDRV_DEV_LOWLEVEL, mixer, &dev_ops);
if (err < 0)
goto _error;
+
+ if (list_empty(&chip->mixer_list) &&
+ !snd_card_proc_new(chip->card, "usbmixer", &entry))
+ snd_info_set_text_ops(entry, chip, snd_usb_mixer_proc_read);
+
list_add(&mixer->list, &chip->mixer_list);
return 0;
diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c
index 77c3588..79e903a 100644
--- a/sound/usb/usbmixer_maps.c
+++ b/sound/usb/usbmixer_maps.c
@@ -19,11 +19,16 @@
*
*/
+struct usbmix_dB_map {
+ u32 min;
+ u32 max;
+};
struct usbmix_name_map {
int id;
const char *name;
int control;
+ struct usbmix_dB_map *dB;
};
struct usbmix_selector_map {
@@ -72,7 +77,7 @@
{ 8, "Line Playback" }, /* FU */
/* 9: IT mic */
{ 10, "Mic Playback" }, /* FU */
- { 11, "Capture Input Source" }, /* SU */
+ { 11, "Capture Source" }, /* SU */
{ 12, "Capture" }, /* FU */
/* 13: OT pcm capture */
/* 14: MU (w/o controls) */
@@ -102,6 +107,9 @@
* e.g. no Master and fake PCM volume
* Pavel Mihaylov <bin@bash.info>
*/
+static struct usbmix_dB_map mp3plus_dB_1 = {-4781, 0}; /* just guess */
+static struct usbmix_dB_map mp3plus_dB_2 = {-1781, 618}; /* just guess */
+
static struct usbmix_name_map mp3plus_map[] = {
/* 1: IT pcm */
/* 2: IT mic */
@@ -110,16 +118,19 @@
/* 5: OT digital out */
/* 6: OT speaker */
/* 7: OT pcm capture */
- { 8, "Capture Input Source" }, /* FU, default PCM Capture Source */
+ { 8, "Capture Source" }, /* FU, default PCM Capture Source */
/* (Mic, Input 1 = Line input, Input 2 = Optical input) */
{ 9, "Master Playback" }, /* FU, default Speaker 1 */
/* { 10, "Mic Capture", 1 }, */ /* FU, Mic Capture */
- /* { 10, "Mic Capture", 2 }, */ /* FU, Mic Capture */
+ { 10, /* "Mic Capture", */ NULL, 2, .dB = &mp3plus_dB_2 },
+ /* FU, Mic Capture */
{ 10, "Mic Boost", 7 }, /* FU, default Auto Gain Input */
- { 11, "Line Capture" }, /* FU, default PCM Capture */
+ { 11, "Line Capture", .dB = &mp3plus_dB_2 },
+ /* FU, default PCM Capture */
{ 12, "Digital In Playback" }, /* FU, default PCM 1 */
- /* { 13, "Mic Playback" }, */ /* FU, default Mic Playback */
- { 14, "Line Playback" }, /* FU, default Speaker */
+ { 13, /* "Mic Playback", */ .dB = &mp3plus_dB_1 },
+ /* FU, default Mic Playback */
+ { 14, "Line Playback", .dB = &mp3plus_dB_1 }, /* FU, default Speaker */
/* 15: MU */
{ 0 } /* terminator */
};
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index a892bda..f06faf7 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -91,7 +91,7 @@
.idVendor = 0x046d,
.idProduct = 0x0850,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
@@ -100,7 +100,7 @@
.idVendor = 0x046d,
.idProduct = 0x08ae,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
@@ -109,7 +109,7 @@
.idVendor = 0x046d,
.idProduct = 0x08c6,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
@@ -118,7 +118,7 @@
.idVendor = 0x046d,
.idProduct = 0x08f0,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
@@ -127,7 +127,7 @@
.idVendor = 0x046d,
.idProduct = 0x08f5,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
@@ -136,7 +136,7 @@
.idVendor = 0x046d,
.idProduct = 0x08f6,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
USB_DEVICE(0x046d, 0x0990),
@@ -301,7 +301,7 @@
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
- .attributes = EP_CS_ATTR_FILL_MAX,
+ .attributes = UAC_EP_CS_ATTR_FILL_MAX,
.endpoint = 0x81,
.ep_attr = 0x05,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
@@ -1266,37 +1266,6 @@
}
}
},
-/* Roland UA-101 in High-Speed Mode only */
-{
- USB_DEVICE(0x0582, 0x007d),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Roland",
- .product_name = "UA-101",
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
- {
- .ifnum = 0,
- .type = QUIRK_AUDIO_EDIROL_UA101
- },
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_EDIROL_UA101
- },
- {
- .ifnum = 2,
- .type = QUIRK_MIDI_FIXED_ENDPOINT,
- .data = & (const struct snd_usb_midi_endpoint_info) {
- .out_cables = 0x0001,
- .in_cables = 0x0001
- }
- },
- {
- .ifnum = -1
- }
- }
- }
-},
{
/* has ID 0x0081 when not in "Advanced Driver" mode */
USB_DEVICE(0x0582, 0x0080),
@@ -2073,6 +2042,33 @@
}
},
+/* Access Music devices */
+{
+ /* VirusTI Desktop */
+ USB_DEVICE_VENDOR_SPEC(0x133e, 0x0815),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = &(const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0003,
+ .in_cables = 0x0003
+ }
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+
/* */
{
/* aka. Serato Scratch Live DJ Box */
@@ -2105,6 +2101,165 @@
}
},
+/* Hauppauge HVR-950Q and HVR-850 */
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7200),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7201),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7202),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7203),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7204),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7205),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7250),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-950Q",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+{
+ USB_DEVICE_VENDOR_SPEC(0x2040, 0x7230),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Hauppauge",
+ .product_name = "HVR-850",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_AUDIO_ALIGN_TRANSFER,
+ }
+},
+
+/* Digidesign Mbox */
+{
+ /* Thanks to Clemens Ladisch <clemens@ladisch.de> */
+ USB_DEVICE(0x0dba, 0x1000),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Digidesign",
+ .product_name = "MBox",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]){
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE,
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .format = SNDRV_PCM_FORMAT_S24_3BE,
+ .channels = 2,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x02,
+ .ep_attr = 0x01,
+ .maxpacksize = 0x130,
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .rate_min = 44100,
+ .rate_max = 48000,
+ .nr_rates = 2,
+ .rate_table = (unsigned int[]) {
+ 44100, 48000
+ }
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+
+ }
+},
+
{
/*
* Some USB MIDI devices don't have an audio control interface,
@@ -2113,7 +2268,7 @@
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
USB_DEVICE_ID_MATCH_INT_SUBCLASS,
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_MIDI_STREAMING,
+ .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING,
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_MIDI_STANDARD_INTERFACE
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 91bb296..44deb21 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -16,6 +16,8 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
#include <sound/core.h>
#include <sound/hwdep.h>
#include <sound/pcm.h>
@@ -315,9 +317,9 @@
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
- err = us122l_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
+ err = us122l_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000);
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000);
if (err < 0)
snd_printk(KERN_ERR "%d: cannot set freq %d to ep 0x%x\n",
dev->devnum, rate, ep);