| /* |
| * linux/arch/arm/mach-omap2/mux.c |
| * |
| * OMAP2 and OMAP3 pin multiplexing configurations |
| * |
| * Copyright (C) 2004 - 2008 Texas Instruments Inc. |
| * Copyright (C) 2003 - 2008 Nokia Corporation |
| * |
| * Written by Tony Lindgren |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/list.h> |
| #include <linux/ctype.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/system.h> |
| |
| #include <plat/control.h> |
| #include <plat/mux.h> |
| |
| #include "mux.h" |
| |
| #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ |
| #define OMAP_MUX_BASE_SZ 0x5ca |
| |
| struct omap_mux_entry { |
| struct omap_mux mux; |
| struct list_head node; |
| }; |
| |
| static unsigned long mux_phys; |
| static void __iomem *mux_base; |
| |
| u16 omap_mux_read(u16 reg) |
| { |
| if (cpu_is_omap24xx()) |
| return __raw_readb(mux_base + reg); |
| else |
| return __raw_readw(mux_base + reg); |
| } |
| |
| void omap_mux_write(u16 val, u16 reg) |
| { |
| if (cpu_is_omap24xx()) |
| __raw_writeb(val, mux_base + reg); |
| else |
| __raw_writew(val, mux_base + reg); |
| } |
| |
| void omap_mux_write_array(struct omap_board_mux *board_mux) |
| { |
| while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { |
| omap_mux_write(board_mux->value, board_mux->reg_offset); |
| board_mux++; |
| } |
| } |
| |
| #if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX) |
| |
| static struct omap_mux_cfg arch_mux_cfg; |
| |
| /* NOTE: See mux.h for the enumeration */ |
| |
| static struct pin_config __initdata_or_module omap24xx_pins[] = { |
| /* |
| * description mux mux pull pull debug |
| * offset mode ena type |
| */ |
| |
| /* 24xx I2C */ |
| MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) |
| MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) |
| MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1) |
| MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) |
| |
| /* Menelaus interrupt */ |
| MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) |
| |
| /* 24xx clocks */ |
| MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1) |
| |
| /* 24xx GPMC chipselects, wait pin monitoring */ |
| MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) |
| MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) |
| MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1) |
| MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1) |
| MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1) |
| MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1) |
| |
| /* 24xx McBSP */ |
| MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1) |
| MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1) |
| MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1) |
| MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1) |
| |
| /* 24xx GPIO */ |
| MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) |
| MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) |
| MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) |
| MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) |
| MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) |
| MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) |
| MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) |
| MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) |
| MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) |
| MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) |
| MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1) |
| MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) |
| MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1) |
| MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1) |
| MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1) |
| MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1) |
| MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) |
| MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) |
| MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1) |
| |
| /* 242x DBG GPIO */ |
| MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1) |
| MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1) |
| MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1) |
| MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1) |
| MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1) |
| MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1) |
| MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1) |
| MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1) |
| MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1) |
| MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1) |
| |
| /* 24xx external DMA requests */ |
| MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) |
| MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) |
| MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) |
| MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) |
| MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) |
| MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) |
| |
| /* UART3 */ |
| MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) |
| MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) |
| |
| /* MMC/SDIO */ |
| MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1) |
| MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1) |
| MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1) |
| MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1) |
| MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1) |
| MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1) |
| MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1) |
| MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1) |
| MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1) |
| MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1) |
| MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1) |
| MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1) |
| |
| /* Full speed USB */ |
| MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1) |
| MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1) |
| MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1) |
| MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1) |
| MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1) |
| MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1) |
| MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1) |
| |
| MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1) |
| MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1) |
| MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1) |
| MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1) |
| MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1) |
| MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1) |
| MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1) |
| MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1) |
| |
| MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1) |
| MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1) |
| MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1) |
| MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1) |
| MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1) |
| |
| /* Keypad GPIO*/ |
| MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1) |
| MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1) |
| MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1) |
| MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1) |
| MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1) |
| MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1) |
| MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1) |
| MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1) |
| MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1) |
| MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1) |
| MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1) |
| MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1) |
| MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1) |
| |
| /* 24xx Menelaus Keypad GPIO */ |
| MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1) |
| MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1) |
| MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1) |
| |
| /* 2430 USB */ |
| MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1) |
| MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1) |
| MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1) |
| MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1) |
| MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1) |
| MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1) |
| MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1) |
| MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1) |
| MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1) |
| MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1) |
| MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1) |
| |
| /* 2430 HS-USB */ |
| MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1) |
| MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1) |
| MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1) |
| MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1) |
| MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1) |
| |
| /* 2430 McBSP */ |
| MUX_CFG_24XX("AD6_2430_MCBSP_CLKS", 0x011E, 0, 0, 0, 1) |
| |
| MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR", 0x011A, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD5_2430_MCBSP1_FSR", 0x011B, 0, 0, 0, 1) |
| MUX_CFG_24XX("AA1_2430_MCBSP1_DX", 0x011C, 0, 0, 0, 1) |
| MUX_CFG_24XX("AF3_2430_MCBSP1_DR", 0x011D, 0, 0, 0, 1) |
| MUX_CFG_24XX("AB3_2430_MCBSP1_FSX", 0x011F, 0, 0, 0, 1) |
| MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX", 0x0120, 0, 0, 0, 1) |
| |
| MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1) |
| MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1) |
| MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1) |
| MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1) |
| MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) |
| |
| MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX", 0x0103, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE4_2430_MCBSP3_FSX", 0x0104, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE2_2430_MCBSP3_DR", 0x0105, 0, 0, 0, 1) |
| MUX_CFG_24XX("AF4_2430_MCBSP3_DX", 0x0106, 0, 0, 0, 1) |
| |
| MUX_CFG_24XX("N3_2430_MCBSP4_CLKX", 0x010B, 1, 0, 0, 1) |
| MUX_CFG_24XX("AD23_2430_MCBSP4_DR", 0x010C, 1, 0, 0, 1) |
| MUX_CFG_24XX("AB25_2430_MCBSP4_DX", 0x010D, 1, 0, 0, 1) |
| MUX_CFG_24XX("AC25_2430_MCBSP4_FSX", 0x010E, 1, 0, 0, 1) |
| |
| MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX", 0x00ED, 1, 0, 0, 1) |
| MUX_CFG_24XX("AF12_2430_MCBSP5_FSX", 0x00ED, 1, 0, 0, 1) |
| MUX_CFG_24XX("K7_2430_MCBSP5_DX", 0x00EF, 1, 0, 0, 1) |
| MUX_CFG_24XX("M1_2430_MCBSP5_DR", 0x00F0, 1, 0, 0, 1) |
| |
| /* 2430 MCSPI1 */ |
| MUX_CFG_24XX("Y18_2430_MCSPI1_CLK", 0x010F, 0, 0, 0, 1) |
| MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO", 0x0110, 0, 0, 0, 1) |
| MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI", 0x0111, 0, 0, 0, 1) |
| MUX_CFG_24XX("U1_2430_MCSPI1_CS0", 0x0112, 0, 0, 0, 1) |
| |
| /* Touchscreen GPIO */ |
| MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) |
| |
| }; |
| |
| #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) |
| |
| #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) |
| |
| static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) |
| { |
| u16 orig; |
| u8 warn = 0, debug = 0; |
| |
| orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); |
| |
| #ifdef CONFIG_OMAP_MUX_DEBUG |
| debug = cfg->debug; |
| #endif |
| warn = (orig != reg); |
| if (debug || warn) |
| printk(KERN_WARNING |
| "MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n", |
| cfg->name, omap_ctrl_base_get() + cfg->mux_reg, |
| orig, reg); |
| } |
| #else |
| #define omap2_cfg_debug(x, y) do {} while (0) |
| #endif |
| |
| static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) |
| { |
| static DEFINE_SPINLOCK(mux_spin_lock); |
| unsigned long flags; |
| u8 reg = 0; |
| |
| spin_lock_irqsave(&mux_spin_lock, flags); |
| reg |= cfg->mask & 0x7; |
| if (cfg->pull_val) |
| reg |= OMAP2_PULL_ENA; |
| if (cfg->pu_pd_val) |
| reg |= OMAP2_PULL_UP; |
| omap2_cfg_debug(cfg, reg); |
| omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); |
| spin_unlock_irqrestore(&mux_spin_lock, flags); |
| |
| return 0; |
| } |
| |
| int __init omap2_mux_init(void) |
| { |
| u32 mux_pbase; |
| |
| if (cpu_is_omap2420()) |
| mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; |
| else if (cpu_is_omap2430()) |
| mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; |
| else |
| return -ENODEV; |
| |
| mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); |
| if (!mux_base) { |
| printk(KERN_ERR "mux: Could not ioremap\n"); |
| return -ENODEV; |
| } |
| |
| if (cpu_is_omap24xx()) { |
| arch_mux_cfg.pins = omap24xx_pins; |
| arch_mux_cfg.size = OMAP24XX_PINS_SZ; |
| arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; |
| |
| return omap_mux_register(&arch_mux_cfg); |
| } |
| |
| return 0; |
| } |
| |
| #else |
| int __init omap2_mux_init(void) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_OMAP_MUX */ |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_ARCH_OMAP3 |
| static LIST_HEAD(muxmodes); |
| static DEFINE_MUTEX(muxmode_mutex); |
| |
| #ifdef CONFIG_OMAP_MUX |
| |
| static char *omap_mux_options; |
| |
| int __init omap_mux_init_gpio(int gpio, int val) |
| { |
| struct omap_mux_entry *e; |
| int found = 0; |
| |
| if (!gpio) |
| return -EINVAL; |
| |
| list_for_each_entry(e, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| if (gpio == m->gpio) { |
| u16 old_mode; |
| u16 mux_mode; |
| |
| old_mode = omap_mux_read(m->reg_offset); |
| mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); |
| mux_mode |= OMAP_MUX_MODE4; |
| printk(KERN_DEBUG "mux: Setting signal " |
| "%s.gpio%i 0x%04x -> 0x%04x\n", |
| m->muxnames[0], gpio, old_mode, mux_mode); |
| omap_mux_write(mux_mode, m->reg_offset); |
| found++; |
| } |
| } |
| |
| if (found == 1) |
| return 0; |
| |
| if (found > 1) { |
| printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); |
| return -EINVAL; |
| } |
| |
| printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); |
| |
| return -ENODEV; |
| } |
| |
| int __init omap_mux_init_signal(char *muxname, int val) |
| { |
| struct omap_mux_entry *e; |
| char *m0_name = NULL, *mode_name = NULL; |
| int found = 0; |
| |
| mode_name = strchr(muxname, '.'); |
| if (mode_name) { |
| *mode_name = '\0'; |
| mode_name++; |
| m0_name = muxname; |
| } else { |
| mode_name = muxname; |
| } |
| |
| list_for_each_entry(e, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| char *m0_entry = m->muxnames[0]; |
| int i; |
| |
| if (m0_name && strcmp(m0_name, m0_entry)) |
| continue; |
| |
| for (i = 0; i < OMAP_MUX_NR_MODES; i++) { |
| char *mode_cur = m->muxnames[i]; |
| |
| if (!mode_cur) |
| continue; |
| |
| if (!strcmp(mode_name, mode_cur)) { |
| u16 old_mode; |
| u16 mux_mode; |
| |
| old_mode = omap_mux_read(m->reg_offset); |
| mux_mode = val | i; |
| printk(KERN_DEBUG "mux: Setting signal " |
| "%s.%s 0x%04x -> 0x%04x\n", |
| m0_entry, muxname, old_mode, mux_mode); |
| omap_mux_write(mux_mode, m->reg_offset); |
| found++; |
| } |
| } |
| } |
| |
| if (found == 1) |
| return 0; |
| |
| if (found > 1) { |
| printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", |
| found, muxname); |
| return -EINVAL; |
| } |
| |
| printk(KERN_ERR "mux: Could not set signal %s\n", muxname); |
| |
| return -ENODEV; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| #define OMAP_MUX_MAX_NR_FLAGS 10 |
| #define OMAP_MUX_TEST_FLAG(val, mask) \ |
| if (((val) & (mask)) == (mask)) { \ |
| i++; \ |
| flags[i] = #mask; \ |
| } |
| |
| /* REVISIT: Add checking for non-optimal mux settings */ |
| static inline void omap_mux_decode(struct seq_file *s, u16 val) |
| { |
| char *flags[OMAP_MUX_MAX_NR_FLAGS]; |
| char mode[sizeof("OMAP_MUX_MODE") + 1]; |
| int i = -1; |
| |
| sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); |
| i++; |
| flags[i] = mode; |
| |
| OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); |
| if (val & OMAP_OFF_EN) { |
| if (!(val & OMAP_OFFOUT_EN)) { |
| if (!(val & OMAP_OFF_PULL_UP)) { |
| OMAP_MUX_TEST_FLAG(val, |
| OMAP_PIN_OFF_INPUT_PULLDOWN); |
| } else { |
| OMAP_MUX_TEST_FLAG(val, |
| OMAP_PIN_OFF_INPUT_PULLUP); |
| } |
| } else { |
| if (!(val & OMAP_OFFOUT_VAL)) { |
| OMAP_MUX_TEST_FLAG(val, |
| OMAP_PIN_OFF_OUTPUT_LOW); |
| } else { |
| OMAP_MUX_TEST_FLAG(val, |
| OMAP_PIN_OFF_OUTPUT_HIGH); |
| } |
| } |
| } |
| |
| if (val & OMAP_INPUT_EN) { |
| if (val & OMAP_PULL_ENA) { |
| if (!(val & OMAP_PULL_UP)) { |
| OMAP_MUX_TEST_FLAG(val, |
| OMAP_PIN_INPUT_PULLDOWN); |
| } else { |
| OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); |
| } |
| } else { |
| OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); |
| } |
| } else { |
| i++; |
| flags[i] = "OMAP_PIN_OUTPUT"; |
| } |
| |
| do { |
| seq_printf(s, "%s", flags[i]); |
| if (i > 0) |
| seq_printf(s, " | "); |
| } while (i-- > 0); |
| } |
| |
| #define OMAP_MUX_DEFNAME_LEN 16 |
| |
| static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) |
| { |
| struct omap_mux_entry *e; |
| |
| list_for_each_entry(e, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| char m0_def[OMAP_MUX_DEFNAME_LEN]; |
| char *m0_name = m->muxnames[0]; |
| u16 val; |
| int i, mode; |
| |
| if (!m0_name) |
| continue; |
| |
| /* REVISIT: Needs to be updated if mode0 names get longer */ |
| for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { |
| if (m0_name[i] == '\0') { |
| m0_def[i] = m0_name[i]; |
| break; |
| } |
| m0_def[i] = toupper(m0_name[i]); |
| } |
| val = omap_mux_read(m->reg_offset); |
| mode = val & OMAP_MUX_MODE7; |
| |
| seq_printf(s, "OMAP%i_MUX(%s, ", |
| cpu_is_omap34xx() ? 3 : 0, m0_def); |
| omap_mux_decode(s, val); |
| seq_printf(s, "),\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, omap_mux_dbg_board_show, &inode->i_private); |
| } |
| |
| static const struct file_operations omap_mux_dbg_board_fops = { |
| .open = omap_mux_dbg_board_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) |
| { |
| struct omap_mux *m = s->private; |
| const char *none = "NA"; |
| u16 val; |
| int mode; |
| |
| val = omap_mux_read(m->reg_offset); |
| mode = val & OMAP_MUX_MODE7; |
| |
| seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", |
| m->muxnames[0], m->muxnames[mode], |
| mux_phys + m->reg_offset, m->reg_offset, val, |
| m->balls[0] ? m->balls[0] : none, |
| m->balls[1] ? m->balls[1] : none); |
| seq_printf(s, "mode: "); |
| omap_mux_decode(s, val); |
| seq_printf(s, "\n"); |
| seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", |
| m->muxnames[0] ? m->muxnames[0] : none, |
| m->muxnames[1] ? m->muxnames[1] : none, |
| m->muxnames[2] ? m->muxnames[2] : none, |
| m->muxnames[3] ? m->muxnames[3] : none, |
| m->muxnames[4] ? m->muxnames[4] : none, |
| m->muxnames[5] ? m->muxnames[5] : none, |
| m->muxnames[6] ? m->muxnames[6] : none, |
| m->muxnames[7] ? m->muxnames[7] : none); |
| |
| return 0; |
| } |
| |
| #define OMAP_MUX_MAX_ARG_CHAR 7 |
| |
| static ssize_t omap_mux_dbg_signal_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[OMAP_MUX_MAX_ARG_CHAR]; |
| struct seq_file *seqf; |
| struct omap_mux *m; |
| unsigned long val; |
| int buf_size, ret; |
| |
| if (count > OMAP_MUX_MAX_ARG_CHAR) |
| return -EINVAL; |
| |
| memset(buf, 0, sizeof(buf)); |
| buf_size = min(count, sizeof(buf) - 1); |
| |
| if (copy_from_user(buf, user_buf, buf_size)) |
| return -EFAULT; |
| |
| ret = strict_strtoul(buf, 0x10, &val); |
| if (ret < 0) |
| return ret; |
| |
| if (val > 0xffff) |
| return -EINVAL; |
| |
| seqf = file->private_data; |
| m = seqf->private; |
| |
| omap_mux_write((u16)val, m->reg_offset); |
| *ppos += count; |
| |
| return count; |
| } |
| |
| static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, omap_mux_dbg_signal_show, inode->i_private); |
| } |
| |
| static const struct file_operations omap_mux_dbg_signal_fops = { |
| .open = omap_mux_dbg_signal_open, |
| .read = seq_read, |
| .write = omap_mux_dbg_signal_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static struct dentry *mux_dbg_dir; |
| |
| static void __init omap_mux_dbg_init(void) |
| { |
| struct omap_mux_entry *e; |
| |
| mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); |
| if (!mux_dbg_dir) |
| return; |
| |
| (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, |
| NULL, &omap_mux_dbg_board_fops); |
| |
| list_for_each_entry(e, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| |
| (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, |
| m, &omap_mux_dbg_signal_fops); |
| } |
| } |
| |
| #else |
| static inline void omap_mux_dbg_init(void) |
| { |
| } |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| static void __init omap_mux_free_names(struct omap_mux *m) |
| { |
| int i; |
| |
| for (i = 0; i < OMAP_MUX_NR_MODES; i++) |
| kfree(m->muxnames[i]); |
| |
| #ifdef CONFIG_DEBUG_FS |
| for (i = 0; i < OMAP_MUX_NR_SIDES; i++) |
| kfree(m->balls[i]); |
| #endif |
| |
| } |
| |
| /* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ |
| static int __init omap_mux_late_init(void) |
| { |
| struct omap_mux_entry *e, *tmp; |
| |
| list_for_each_entry_safe(e, tmp, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| u16 mode = omap_mux_read(m->reg_offset); |
| |
| if (OMAP_MODE_GPIO(mode)) |
| continue; |
| |
| #ifndef CONFIG_DEBUG_FS |
| mutex_lock(&muxmode_mutex); |
| list_del(&e->node); |
| mutex_unlock(&muxmode_mutex); |
| omap_mux_free_names(m); |
| kfree(m); |
| #endif |
| |
| } |
| |
| omap_mux_dbg_init(); |
| |
| return 0; |
| } |
| late_initcall(omap_mux_late_init); |
| |
| static void __init omap_mux_package_fixup(struct omap_mux *p, |
| struct omap_mux *superset) |
| { |
| while (p->reg_offset != OMAP_MUX_TERMINATOR) { |
| struct omap_mux *s = superset; |
| int found = 0; |
| |
| while (s->reg_offset != OMAP_MUX_TERMINATOR) { |
| if (s->reg_offset == p->reg_offset) { |
| *s = *p; |
| found++; |
| break; |
| } |
| s++; |
| } |
| if (!found) |
| printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", |
| p->reg_offset); |
| p++; |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| static void __init omap_mux_package_init_balls(struct omap_ball *b, |
| struct omap_mux *superset) |
| { |
| while (b->reg_offset != OMAP_MUX_TERMINATOR) { |
| struct omap_mux *s = superset; |
| int found = 0; |
| |
| while (s->reg_offset != OMAP_MUX_TERMINATOR) { |
| if (s->reg_offset == b->reg_offset) { |
| s->balls[0] = b->balls[0]; |
| s->balls[1] = b->balls[1]; |
| found++; |
| break; |
| } |
| s++; |
| } |
| if (!found) |
| printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", |
| b->reg_offset); |
| b++; |
| } |
| } |
| |
| #else /* CONFIG_DEBUG_FS */ |
| |
| static inline void omap_mux_package_init_balls(struct omap_ball *b, |
| struct omap_mux *superset) |
| { |
| } |
| |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| static int __init omap_mux_setup(char *options) |
| { |
| if (!options) |
| return 0; |
| |
| omap_mux_options = options; |
| |
| return 1; |
| } |
| __setup("omap_mux=", omap_mux_setup); |
| |
| /* |
| * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 |
| * cmdline options only override the bootloader values. |
| * During development, please enable CONFIG_DEBUG_FS, and use the |
| * signal specific entries under debugfs. |
| */ |
| static void __init omap_mux_set_cmdline_signals(void) |
| { |
| char *options, *next_opt, *token; |
| |
| if (!omap_mux_options) |
| return; |
| |
| options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); |
| if (!options) |
| return; |
| |
| strcpy(options, omap_mux_options); |
| next_opt = options; |
| |
| while ((token = strsep(&next_opt, ",")) != NULL) { |
| char *keyval, *name; |
| unsigned long val; |
| |
| keyval = token; |
| name = strsep(&keyval, "="); |
| if (name) { |
| int res; |
| |
| res = strict_strtoul(keyval, 0x10, &val); |
| if (res < 0) |
| continue; |
| |
| omap_mux_init_signal(name, (u16)val); |
| } |
| } |
| |
| kfree(options); |
| } |
| |
| static int __init omap_mux_copy_names(struct omap_mux *src, |
| struct omap_mux *dst) |
| { |
| int i; |
| |
| for (i = 0; i < OMAP_MUX_NR_MODES; i++) { |
| if (src->muxnames[i]) { |
| dst->muxnames[i] = |
| kmalloc(strlen(src->muxnames[i]) + 1, |
| GFP_KERNEL); |
| if (!dst->muxnames[i]) |
| goto free; |
| strcpy(dst->muxnames[i], src->muxnames[i]); |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { |
| if (src->balls[i]) { |
| dst->balls[i] = |
| kmalloc(strlen(src->balls[i]) + 1, |
| GFP_KERNEL); |
| if (!dst->balls[i]) |
| goto free; |
| strcpy(dst->balls[i], src->balls[i]); |
| } |
| } |
| #endif |
| |
| return 0; |
| |
| free: |
| omap_mux_free_names(dst); |
| return -ENOMEM; |
| |
| } |
| |
| #endif /* CONFIG_OMAP_MUX */ |
| |
| static u16 omap_mux_get_by_gpio(int gpio) |
| { |
| struct omap_mux_entry *e; |
| u16 offset = OMAP_MUX_TERMINATOR; |
| |
| list_for_each_entry(e, &muxmodes, node) { |
| struct omap_mux *m = &e->mux; |
| if (m->gpio == gpio) { |
| offset = m->reg_offset; |
| break; |
| } |
| } |
| |
| return offset; |
| } |
| |
| /* Needed for dynamic muxing of GPIO pins for off-idle */ |
| u16 omap_mux_get_gpio(int gpio) |
| { |
| u16 offset; |
| |
| offset = omap_mux_get_by_gpio(gpio); |
| if (offset == OMAP_MUX_TERMINATOR) { |
| printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); |
| return offset; |
| } |
| |
| return omap_mux_read(offset); |
| } |
| |
| /* Needed for dynamic muxing of GPIO pins for off-idle */ |
| void omap_mux_set_gpio(u16 val, int gpio) |
| { |
| u16 offset; |
| |
| offset = omap_mux_get_by_gpio(gpio); |
| if (offset == OMAP_MUX_TERMINATOR) { |
| printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); |
| return; |
| } |
| |
| omap_mux_write(val, offset); |
| } |
| |
| static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) |
| { |
| struct omap_mux_entry *entry; |
| struct omap_mux *m; |
| |
| entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); |
| if (!entry) |
| return NULL; |
| |
| m = &entry->mux; |
| memcpy(m, src, sizeof(struct omap_mux_entry)); |
| |
| #ifdef CONFIG_OMAP_MUX |
| if (omap_mux_copy_names(src, m)) { |
| kfree(entry); |
| return NULL; |
| } |
| #endif |
| |
| mutex_lock(&muxmode_mutex); |
| list_add_tail(&entry->node, &muxmodes); |
| mutex_unlock(&muxmode_mutex); |
| |
| return m; |
| } |
| |
| /* |
| * Note if CONFIG_OMAP_MUX is not selected, we will only initialize |
| * the GPIO to mux offset mapping that is needed for dynamic muxing |
| * of GPIO pins for off-idle. |
| */ |
| static void __init omap_mux_init_list(struct omap_mux *superset) |
| { |
| while (superset->reg_offset != OMAP_MUX_TERMINATOR) { |
| struct omap_mux *entry; |
| |
| #ifdef CONFIG_OMAP_MUX |
| if (!superset->muxnames || !superset->muxnames[0]) { |
| superset++; |
| continue; |
| } |
| #else |
| /* Skip pins that are not muxed as GPIO by bootloader */ |
| if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { |
| superset++; |
| continue; |
| } |
| #endif |
| |
| entry = omap_mux_list_add(superset); |
| if (!entry) { |
| printk(KERN_ERR "mux: Could not add entry\n"); |
| return; |
| } |
| superset++; |
| } |
| } |
| |
| #ifdef CONFIG_OMAP_MUX |
| |
| static void omap_mux_init_package(struct omap_mux *superset, |
| struct omap_mux *package_subset, |
| struct omap_ball *package_balls) |
| { |
| if (package_subset) |
| omap_mux_package_fixup(package_subset, superset); |
| if (package_balls) |
| omap_mux_package_init_balls(package_balls, superset); |
| } |
| |
| static void omap_mux_init_signals(struct omap_board_mux *board_mux) |
| { |
| omap_mux_set_cmdline_signals(); |
| omap_mux_write_array(board_mux); |
| } |
| |
| #else |
| |
| static void omap_mux_init_package(struct omap_mux *superset, |
| struct omap_mux *package_subset, |
| struct omap_ball *package_balls) |
| { |
| } |
| |
| static void omap_mux_init_signals(struct omap_board_mux *board_mux) |
| { |
| } |
| |
| #endif |
| |
| int __init omap_mux_init(u32 mux_pbase, u32 mux_size, |
| struct omap_mux *superset, |
| struct omap_mux *package_subset, |
| struct omap_board_mux *board_mux, |
| struct omap_ball *package_balls) |
| { |
| if (mux_base) |
| return -EBUSY; |
| |
| mux_phys = mux_pbase; |
| mux_base = ioremap(mux_pbase, mux_size); |
| if (!mux_base) { |
| printk(KERN_ERR "mux: Could not ioremap\n"); |
| return -ENODEV; |
| } |
| |
| omap_mux_init_package(superset, package_subset, package_balls); |
| omap_mux_init_list(superset); |
| omap_mux_init_signals(board_mux); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_ARCH_OMAP3 */ |
| |