Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Our SoC branch usually contains expanded support for new SoCs and
other core platform code. In this case, that includes:
- support for the new Annapurna Labs "Alpine" platform
- a rework greatly simplifying adding new platform support to the
MCPM subsystem (Multi-cluster power management)
- cpuidle and PM improvements for Exynos3250
- misc updates for Renesas, OMAP, Meson, i.MX. Some of these could
have gone in other branches but ended up here for various reasons"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
ARM: alpine: add support for generic pci
ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
ARM: vexpress: DCSCB: tighten CPU validity assertion
ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
ARM: MCPM: move the algorithmic complexity to the core code
ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
ARM: EXYNOS: add AFTR mode support for Exynos3250
ARM: EXYNOS: add code for setting/clearing boot flag
ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
ARM: EXYNOS: Remove left over 'extra_save'
ARM: EXYNOS: Constify exynos_pm_data array
ARM: EXYNOS: use static in suspend.c
ARM: EXYNOS: Use platform device name as power domain name
ARM: EXYNOS: add support for async-bridge clocks for pm_domains
ARM: omap-device: add missed callback for suspend-to-disk
...
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 1745379..18a775d 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -96,6 +96,11 @@
88F6820
88F6828
+ Armada 390/398 Flavors:
+ 88F6920
+ 88F6928
+ Product infos: http://www.marvell.com/embedded-processors/armada-39x/
+
Armada XP Flavors:
MV78230
MV78260
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt
new file mode 100644
index 0000000..f404a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/al,alpine.txt
@@ -0,0 +1,88 @@
+Annapurna Labs Alpine Platform Device Tree Bindings
+---------------------------------------------------------------
+
+Boards in the Alpine family shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "al,alpine"
+
+* Example:
+
+/ {
+ model = "Annapurna Labs Alpine Dev Board";
+ compatible = "al,alpine";
+
+ ...
+}
+
+* CPU node:
+
+The Alpine platform includes cortex-a15 cores.
+enable-method: must be "al,alpine-smp" to allow smp [1]
+
+Example:
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "al,alpine-smp";
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+};
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+Example:
+
+cpu_resume {
+ compatible = "al,alpine-cpu-resume";
+ reg = <0xfbff5ed0 0x30>;
+};
+
+* Alpine System-Fabric Service Registers
+
+The System-Fabric Service Registers allow various operation on CPU and
+system fabric, like powering CPUs off.
+
+Properties:
+- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
+- reg : Offset and length of the register set for the device
+
+Example:
+
+nb_service {
+ compatible = "al,alpine-sysfabric-service", "syscon";
+ reg = <0xfb070000 0x10000>;
+};
+
+[1] arm/cpu-enable-method/al,alpine-smp
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 8fe8150..973884a 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -8,3 +8,7 @@
Boards with the Amlogic Meson8 SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8";
+
+Board compatible values:
+ - "geniatech,atv1200"
+ - "minix,neo-x8"
diff --git a/Documentation/devicetree/bindings/arm/armada-39x.txt b/Documentation/devicetree/bindings/arm/armada-39x.txt
new file mode 100644
index 0000000..53d4ff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-39x.txt
@@ -0,0 +1,20 @@
+Marvell Armada 39x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 39x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada390"
+
+In addition, boards using the Marvell Armada 398 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada398"
+
+Example:
+
+compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
new file mode 100644
index 0000000..c2e0cc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -0,0 +1,52 @@
+========================================================
+Secondary CPU enable-method "al,alpine-smp" binding
+========================================================
+
+This document describes the "al,alpine-smp" method for
+enabling secondary CPUs. To apply to all CPUs, a single
+"al,alpine-smp" enable method should be defined in the
+"cpus" node.
+
+Enable method name: "al,alpine-smp"
+Compatible machines: "al,alpine"
+Compatible CPUs: "arm,cortex-a15"
+Related properties: (none)
+
+Note:
+This enable method requires valid nodes compatible with
+"al,alpine-cpu-resume" and "al,alpine-nb-service"[1].
+
+Example:
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "al,alpine-smp";
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+};
+
+--
+[1] arm/al,alpine.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b9e0a9..6aa331d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -192,6 +192,7 @@
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
+ "marvell,armada-390-smp"
"marvell,armada-xp-smp"
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
diff --git a/Documentation/devicetree/bindings/arm/geniatech.txt b/Documentation/devicetree/bindings/arm/geniatech.txt
deleted file mode 100644
index 74ccba4..0000000
--- a/Documentation/devicetree/bindings/arm/geniatech.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Geniatech platforms device tree bindings
--------------------------------------------
-
-Geniatech ATV1200
- - compatible = "geniatech,atv1200"
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
new file mode 100644
index 0000000..65cc034
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -0,0 +1,59 @@
+Freescale i.MX General Power Controller
+=======================================
+
+The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
+domains.
+
+Required properties:
+- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain GPC interrupt request 1
+- pu-supply: Link to the LDO regulator powering the PU power domain
+- clocks: Clock phandles to devices in the PU power domain that need
+ to be enabled during domain power-up for reset propagation.
+- #power-domain-cells: Should be 1, see below:
+
+The gpc node is a power-controller as documented by the generic power domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+
+Example:
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ #power-domain-cells = <1>;
+ };
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains' property
+that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
+the power domain the device belongs to.
+
+Example of a device that is part of the PU power domain:
+
+ vpu: vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ /* ... */
+ power-domains = <&gpc 1>;
+ /* ... */
+ };
+
+The following DOMAIN_INDEX values are valid for i.MX6Q:
+ARM_DOMAIN 0
+PU_DOMAIN 1
+The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+DISPLAY_DOMAIN 2
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index aecec35..54c1d57 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -11,6 +11,7 @@
adh AD Holdings Plc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
+al Annapurna Labs
allwinner Allwinner Technology Co., Ltd.
alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
@@ -118,6 +119,7 @@
micrel Micrel Inc.
microchip Microchip Technology Inc.
micron Micron Technology Inc.
+minix MINIX Technology Ltd.
mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
diff --git a/MAINTAINERS b/MAINTAINERS
index 9988e1a..e85dbd3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -886,6 +886,11 @@
F: drivers/media/rc/meson-ir.c
N: meson[x68]
+ARM/Annapurna Labs ALPINE ARCHITECTURE
+M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
+S: Maintained
+F: arch/arm/mach-alpine/
+
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8baa96..d74c9ea 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -839,6 +839,8 @@
#
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-alpine/Kconfig"
+
source "arch/arm/mach-asm9260/Kconfig"
source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4cfb4b8..771d518 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -93,6 +93,14 @@
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
+ config DEBUG_ALPINE_UART0
+ bool "Kernel low-level debugging messages via Alpine UART0"
+ depends on ARCH_ALPINE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Alpine based platforms.
+
config DEBUG_ASM9260_UART
bool "Kernel low-level debugging via asm9260 UART"
depends on MACH_ASM9260
@@ -1397,6 +1405,7 @@
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfcb00000 if DEBUG_HI3620_UART
+ default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1462,6 +1471,7 @@
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfd012000 if ARCH_MV78XX0
+ default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfde12000 if ARCH_DOVE
default 0xfe012000 if ARCH_ORION5X
default 0xf31004c0 if DEBUG_MESON_UARTAO
@@ -1522,7 +1532,7 @@
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
- ARCH_KEYSTONE || \
+ ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index cced41d..985227c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -142,6 +142,7 @@
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_ALPINE) += alpine
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_AXXIA) += axxia
machine-$(CONFIG_ARCH_BCM) += bcm
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 0c3b678..2a0f895 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -513,9 +513,27 @@
pinctrl-0 = <&iic3_pins>;
status = "okay";
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
vdd_dvfs: regulator@68 {
compatible = "dlg,da9210";
reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index a3c2780..b2dcf64 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -517,9 +517,27 @@
status = "okay";
clock-frequency = <100000>;
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
vdd_dvfs: regulator@68 {
compatible = "dlg,da9210";
reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 3c165fc..5f8a52a 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -55,22 +55,81 @@
return (platform_ops) ? true : false;
}
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
+
+static inline bool mcpm_cluster_unused(unsigned int cluster)
+{
+ int i, cnt;
+ for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++)
+ cnt |= mcpm_cpu_use_count[cluster][i];
+ return !cnt;
+}
+
int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
{
+ bool cpu_is_down, cluster_is_down;
+ int ret = 0;
+
if (!platform_ops)
return -EUNATCH; /* try not to shadow power_up errors */
might_sleep();
- return platform_ops->power_up(cpu, cluster);
+
+ /* backward compatibility callback */
+ if (platform_ops->power_up)
+ return platform_ops->power_up(cpu, cluster);
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+
+ /*
+ * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+ * variant exists, we need to disable IRQs manually here.
+ */
+ local_irq_disable();
+ arch_spin_lock(&mcpm_lock);
+
+ cpu_is_down = !mcpm_cpu_use_count[cluster][cpu];
+ cluster_is_down = mcpm_cluster_unused(cluster);
+
+ mcpm_cpu_use_count[cluster][cpu]++;
+ /*
+ * The only possible values are:
+ * 0 = CPU down
+ * 1 = CPU (still) up
+ * 2 = CPU requested to be up before it had a chance
+ * to actually make itself down.
+ * Any other value is a bug.
+ */
+ BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 &&
+ mcpm_cpu_use_count[cluster][cpu] != 2);
+
+ if (cluster_is_down)
+ ret = platform_ops->cluster_powerup(cluster);
+ if (cpu_is_down && !ret)
+ ret = platform_ops->cpu_powerup(cpu, cluster);
+
+ arch_spin_unlock(&mcpm_lock);
+ local_irq_enable();
+ return ret;
}
typedef void (*phys_reset_t)(unsigned long);
void mcpm_cpu_power_down(void)
{
+ unsigned int mpidr, cpu, cluster;
+ bool cpu_going_down, last_man;
phys_reset_t phys_reset;
- if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
- return;
+ if (WARN_ON_ONCE(!platform_ops))
+ return;
BUG_ON(!irqs_disabled());
/*
@@ -79,28 +138,65 @@
*/
setup_mm_for_reboot();
- platform_ops->power_down();
+ /* backward compatibility callback */
+ if (platform_ops->power_down) {
+ platform_ops->power_down();
+ goto not_dead;
+ }
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ arch_spin_lock(&mcpm_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+
+ mcpm_cpu_use_count[cluster][cpu]--;
+ BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 &&
+ mcpm_cpu_use_count[cluster][cpu] != 1);
+ cpu_going_down = !mcpm_cpu_use_count[cluster][cpu];
+ last_man = mcpm_cluster_unused(cluster);
+
+ if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+ platform_ops->cpu_powerdown_prepare(cpu, cluster);
+ platform_ops->cluster_powerdown_prepare(cluster);
+ arch_spin_unlock(&mcpm_lock);
+ platform_ops->cluster_cache_disable();
+ __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+ } else {
+ if (cpu_going_down)
+ platform_ops->cpu_powerdown_prepare(cpu, cluster);
+ arch_spin_unlock(&mcpm_lock);
+ /*
+ * If cpu_going_down is false here, that means a power_up
+ * request raced ahead of us. Even if we do not want to
+ * shut this CPU down, the caller still expects execution
+ * to return through the system resume entry path, like
+ * when the WFI is aborted due to a new IRQ or the like..
+ * So let's continue with cache cleaning in all cases.
+ */
+ platform_ops->cpu_cache_disable();
+ }
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ /* Now we are prepared for power-down, do it: */
+ if (cpu_going_down)
+ wfi();
+
+not_dead:
/*
* It is possible for a power_up request to happen concurrently
* with a power_down request for the same CPU. In this case the
- * power_down method might not be able to actually enter a
- * powered down state with the WFI instruction if the power_up
- * method has removed the required reset condition. The
- * power_down method is then allowed to return. We must perform
- * a re-entry in the kernel as if the power_up method just had
- * deasserted reset on the CPU.
- *
- * To simplify race issues, the platform specific implementation
- * must accommodate for the possibility of unordered calls to
- * power_down and power_up with a usage count. Therefore, if a
- * call to power_up is issued for a CPU that is not down, then
- * the next call to power_down must not attempt a full shutdown
- * but only do the minimum (normally disabling L1 cache and CPU
- * coherency) and return just as if a concurrent power_up request
- * had happened as described above.
+ * CPU might not be able to actually enter a powered down state
+ * with the WFI instruction if the power_up request has removed
+ * the required reset condition. We must perform a re-entry in
+ * the kernel as if the power_up method just had deasserted reset
+ * on the CPU.
*/
-
phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
phys_reset(virt_to_phys(mcpm_entry_point));
@@ -125,26 +221,66 @@
void mcpm_cpu_suspend(u64 expected_residency)
{
- phys_reset_t phys_reset;
-
- if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+ if (WARN_ON_ONCE(!platform_ops))
return;
- BUG_ON(!irqs_disabled());
- /* Very similar to mcpm_cpu_power_down() */
- setup_mm_for_reboot();
- platform_ops->suspend(expected_residency);
- phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
- phys_reset(virt_to_phys(mcpm_entry_point));
- BUG();
+ /* backward compatibility callback */
+ if (platform_ops->suspend) {
+ phys_reset_t phys_reset;
+ BUG_ON(!irqs_disabled());
+ setup_mm_for_reboot();
+ platform_ops->suspend(expected_residency);
+ phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+ phys_reset(virt_to_phys(mcpm_entry_point));
+ BUG();
+ }
+
+ /* Some platforms might have to enable special resume modes, etc. */
+ if (platform_ops->cpu_suspend_prepare) {
+ unsigned int mpidr = read_cpuid_mpidr();
+ unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ arch_spin_lock(&mcpm_lock);
+ platform_ops->cpu_suspend_prepare(cpu, cluster);
+ arch_spin_unlock(&mcpm_lock);
+ }
+ mcpm_cpu_power_down();
}
int mcpm_cpu_powered_up(void)
{
+ unsigned int mpidr, cpu, cluster;
+ bool cpu_was_down, first_man;
+ unsigned long flags;
+
if (!platform_ops)
return -EUNATCH;
- if (platform_ops->powered_up)
+
+ /* backward compatibility callback */
+ if (platform_ops->powered_up) {
platform_ops->powered_up();
+ return 0;
+ }
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ local_irq_save(flags);
+ arch_spin_lock(&mcpm_lock);
+
+ cpu_was_down = !mcpm_cpu_use_count[cluster][cpu];
+ first_man = mcpm_cluster_unused(cluster);
+
+ if (first_man && platform_ops->cluster_is_up)
+ platform_ops->cluster_is_up(cluster);
+ if (cpu_was_down)
+ mcpm_cpu_use_count[cluster][cpu] = 1;
+ if (platform_ops->cpu_is_up)
+ platform_ops->cpu_is_up(cpu, cluster);
+
+ arch_spin_unlock(&mcpm_lock);
+ local_irq_restore(flags);
+
return 0;
}
@@ -334,8 +470,10 @@
}
mpidr = read_cpuid_mpidr();
this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- for_each_online_cpu(i)
+ for_each_online_cpu(i) {
+ mcpm_cpu_use_count[this_cluster][i] = 1;
mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP;
+ }
mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP;
sync_cache_w(&mcpm_sync);
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 3446f6a..50b378f 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -171,12 +171,73 @@
int mcpm_cpu_powered_up(void);
/*
- * Platform specific methods used in the implementation of the above API.
+ * Platform specific callbacks used in the implementation of the above API.
+ *
+ * cpu_powerup:
+ * Make given CPU runable. Called with MCPM lock held and IRQs disabled.
+ * The given cluster is assumed to be set up (cluster_powerup would have
+ * been called beforehand). Must return 0 for success or negative error code.
+ *
+ * cluster_powerup:
+ * Set up power for given cluster. Called with MCPM lock held and IRQs
+ * disabled. Called before first cpu_powerup when cluster is down. Must
+ * return 0 for success or negative error code.
+ *
+ * cpu_suspend_prepare:
+ * Special suspend configuration. Called on target CPU with MCPM lock held
+ * and IRQs disabled. This callback is optional. If provided, it is called
+ * before cpu_powerdown_prepare.
+ *
+ * cpu_powerdown_prepare:
+ * Configure given CPU for power down. Called on target CPU with MCPM lock
+ * held and IRQs disabled. Power down must be effective only at the next WFI instruction.
+ *
+ * cluster_powerdown_prepare:
+ * Configure given cluster for power down. Called on one CPU from target
+ * cluster with MCPM lock held and IRQs disabled. A cpu_powerdown_prepare
+ * for each CPU in the cluster has happened when this occurs.
+ *
+ * cpu_cache_disable:
+ * Clean and disable CPU level cache for the calling CPU. Called on with IRQs
+ * disabled only. The CPU is no longer cache coherent with the rest of the
+ * system when this returns.
+ *
+ * cluster_cache_disable:
+ * Clean and disable the cluster wide cache as well as the CPU level cache
+ * for the calling CPU. No call to cpu_cache_disable will happen for this
+ * CPU. Called with IRQs disabled and only when all the other CPUs are done
+ * with their own cpu_cache_disable. The cluster is no longer cache coherent
+ * with the rest of the system when this returns.
+ *
+ * cpu_is_up:
+ * Called on given CPU after it has been powered up or resumed. The MCPM lock
+ * is held and IRQs disabled. This callback is optional.
+ *
+ * cluster_is_up:
+ * Called by the first CPU to be powered up or resumed in given cluster.
+ * The MCPM lock is held and IRQs disabled. This callback is optional. If
+ * provided, it is called before cpu_is_up for that CPU.
+ *
+ * wait_for_powerdown:
+ * Wait until given CPU is powered down. This is called in sleeping context.
+ * Some reasonable timeout must be considered. Must return 0 for success or
+ * negative error code.
*/
struct mcpm_platform_ops {
+ int (*cpu_powerup)(unsigned int cpu, unsigned int cluster);
+ int (*cluster_powerup)(unsigned int cluster);
+ void (*cpu_suspend_prepare)(unsigned int cpu, unsigned int cluster);
+ void (*cpu_powerdown_prepare)(unsigned int cpu, unsigned int cluster);
+ void (*cluster_powerdown_prepare)(unsigned int cluster);
+ void (*cpu_cache_disable)(void);
+ void (*cluster_cache_disable)(void);
+ void (*cpu_is_up)(unsigned int cpu, unsigned int cluster);
+ void (*cluster_is_up)(unsigned int cluster);
+ int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster);
+
+ /* deprecated callbacks */
int (*power_up)(unsigned int cpu, unsigned int cluster);
void (*power_down)(void);
- int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster);
void (*suspend)(u64);
void (*powered_up)(void);
};
diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig
new file mode 100644
index 0000000..2c44b93
--- /dev/null
+++ b/arch/arm/mach-alpine/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_ALPINE
+ bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select GENERIC_IRQ_CHIP
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_SMP
+ select MFD_SYSCON
+ select PCI
+ select PCI_HOST_GENERIC
+ help
+ This enables support for the Annapurna Labs Alpine V1 boards.
diff --git a/arch/arm/mach-alpine/Makefile b/arch/arm/mach-alpine/Makefile
new file mode 100644
index 0000000..b667489
--- /dev/null
+++ b/arch/arm/mach-alpine/Makefile
@@ -0,0 +1,2 @@
+obj-y += alpine_machine.o
+obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o
diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c
new file mode 100644
index 0000000..121c77c
--- /dev/null
+++ b/arch/arm/mach-alpine/alpine_cpu_pm.c
@@ -0,0 +1,70 @@
+/*
+ * Low-level power-management support for Alpine platform.
+ *
+ * Copyright (C) 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include "alpine_cpu_pm.h"
+#include "alpine_cpu_resume.h"
+
+/* NB registers */
+#define AL_SYSFAB_POWER_CONTROL(cpu) (0x2000 + (cpu)*0x100 + 0x20)
+
+static struct regmap *al_sysfabric;
+static struct al_cpu_resume_regs __iomem *al_cpu_resume_regs;
+static int wakeup_supported;
+
+int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr)
+{
+ if (!wakeup_supported)
+ return -ENOSYS;
+
+ /*
+ * Set CPU resume address -
+ * secure firmware running on boot will jump to this address
+ * after setting proper CPU mode, and initialiing e.g. secure
+ * regs (the same mode all CPUs are booted to - usually HYP)
+ */
+ writel(phys_resume_addr,
+ &al_cpu_resume_regs->per_cpu[phys_cpu].resume_addr);
+
+ /* Power-up the CPU */
+ regmap_write(al_sysfabric, AL_SYSFAB_POWER_CONTROL(phys_cpu), 0);
+
+ return 0;
+}
+
+void __init alpine_cpu_pm_init(void)
+{
+ struct device_node *np;
+ uint32_t watermark;
+
+ al_sysfabric = syscon_regmap_lookup_by_compatible("al,alpine-sysfabric-service");
+
+ np = of_find_compatible_node(NULL, NULL, "al,alpine-cpu-resume");
+ al_cpu_resume_regs = of_iomap(np, 0);
+
+ wakeup_supported = !IS_ERR(al_sysfabric) && al_cpu_resume_regs;
+
+ if (wakeup_supported) {
+ watermark = readl(&al_cpu_resume_regs->watermark);
+ wakeup_supported = (watermark & AL_CPU_RESUME_MAGIC_NUM_MASK)
+ == AL_CPU_RESUME_MAGIC_NUM;
+ }
+}
diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.h b/arch/arm/mach-alpine/alpine_cpu_pm.h
new file mode 100644
index 0000000..5179e69
--- /dev/null
+++ b/arch/arm/mach-alpine/alpine_cpu_pm.h
@@ -0,0 +1,26 @@
+/*
+ * Low-level power-management support for Alpine platform.
+ *
+ * Copyright (C) 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ALPINE_CPU_PM_H__
+#define __ALPINE_CPU_PM_H__
+
+/* Alpine CPU Power Management Services Initialization */
+void alpine_cpu_pm_init(void);
+
+/* Wake-up a CPU */
+int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr);
+
+#endif /* __ALPINE_CPU_PM_H__ */
diff --git a/arch/arm/mach-alpine/alpine_cpu_resume.h b/arch/arm/mach-alpine/alpine_cpu_resume.h
new file mode 100644
index 0000000..c80150c
--- /dev/null
+++ b/arch/arm/mach-alpine/alpine_cpu_resume.h
@@ -0,0 +1,38 @@
+/*
+ * Annapurna labs cpu-resume register structure.
+ *
+ * Copyright (C) 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ALPINE_CPU_RESUME_H_
+#define ALPINE_CPU_RESUME_H_
+
+/* Per-cpu regs */
+struct al_cpu_resume_regs_per_cpu {
+ uint32_t flags;
+ uint32_t resume_addr;
+};
+
+/* general regs */
+struct al_cpu_resume_regs {
+ /* Watermark for validating the CPU resume struct */
+ uint32_t watermark;
+ uint32_t flags;
+ struct al_cpu_resume_regs_per_cpu per_cpu[];
+};
+
+/* The expected magic number for validating the resume addresses */
+#define AL_CPU_RESUME_MAGIC_NUM 0xf0e1d200
+#define AL_CPU_RESUME_MAGIC_NUM_MASK 0xffffff00
+
+#endif /* ALPINE_CPU_RESUME_H_ */
diff --git a/arch/arm/mach-alpine/alpine_machine.c b/arch/arm/mach-alpine/alpine_machine.c
new file mode 100644
index 0000000..b8e2145
--- /dev/null
+++ b/arch/arm/mach-alpine/alpine_machine.c
@@ -0,0 +1,28 @@
+/*
+ * Machine declaration for Alpine platforms.
+ *
+ * Copyright (C) 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const al_match[] __initconst = {
+ "al,alpine",
+ NULL,
+};
+
+DT_MACHINE_START(AL_DT, "Annapurna Labs Alpine")
+ .dt_compat = al_match,
+MACHINE_END
diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c
new file mode 100644
index 0000000..f78429f
--- /dev/null
+++ b/arch/arm/mach-alpine/platsmp.c
@@ -0,0 +1,49 @@
+/*
+ * SMP operations for Alpine platform.
+ *
+ * Copyright (C) 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <asm/smp_plat.h>
+
+#include "alpine_cpu_pm.h"
+
+static int alpine_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ phys_addr_t addr;
+
+ addr = virt_to_phys(secondary_startup);
+
+ if (addr > (phys_addr_t)(uint32_t)(-1)) {
+ pr_err("FAIL: resume address over 32bit (%pa)", &addr);
+ return -EINVAL;
+ }
+
+ return alpine_cpu_wakeup(cpu_logical_map(cpu), (uint32_t)addr);
+}
+
+static void __init alpine_smp_prepare_cpus(unsigned int max_cpus)
+{
+ alpine_cpu_pm_init();
+}
+
+static struct smp_operations alpine_smp_ops __initdata = {
+ .smp_prepare_cpus = alpine_smp_prepare_cpus,
+ .smp_boot_secondary = alpine_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(alpine_smp, "al,alpine-smp", &alpine_smp_ops);
diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
index 30dc58b..7ae894c 100644
--- a/arch/arm/mach-bcm/bcm_cygnus.c
+++ b/arch/arm/mach-bcm/bcm_cygnus.c
@@ -13,7 +13,7 @@
#include <asm/mach/arch.h>
-static const char const *bcm_cygnus_dt_compat[] = {
+static const char * const bcm_cygnus_dt_compat[] __initconst = {
"brcm,cygnus",
NULL,
};
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f70eca7..acd5b56 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -126,6 +126,12 @@
void exynos_firmware_init(void);
+/* CPU BOOT mode flag for Exynos3250 SoC bootloader */
+#define C2_STATE (1 << 3)
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
+
extern u32 exynos_get_eint_wake_mask(void);
#ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 8576a9f..bcde0dd 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -214,6 +214,7 @@
of_machine_is_compatible("samsung,exynos4212") ||
(of_machine_is_compatible("samsung,exynos4412") &&
of_machine_is_compatible("samsung,trats2")) ||
+ of_machine_is_compatible("samsung,exynos3250") ||
of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 4791a3c..1bd3576 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -48,7 +48,13 @@
__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
sysram_ns_base_addr + 0x24);
__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
- exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
+ if (soc_is_exynos3250()) {
+ exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
+ SMC_POWERSTATE_IDLE, 0);
+ exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
+ SMC_POWERSTATE_IDLE, 0);
+ } else
+ exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
break;
case FW_DO_IDLE_SLEEP:
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
@@ -206,3 +212,28 @@
outer_cache.configure = exynos_l2_configure;
}
}
+
+#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28)
+#define BOOT_MODE_MASK 0x1f
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+
+ if (mode & BOOT_MODE_MASK)
+ tmp &= ~BOOT_MODE_MASK;
+
+ tmp |= mode;
+ __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}
+
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+ tmp &= ~mode;
+ __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index b0d3c2e..9bdf547 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -61,25 +61,7 @@
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
"r9", "r10", "lr", "memory")
-/*
- * We can't use regular spinlocks. In the switcher case, it is possible
- * for an outbound CPU to call power_down() after its inbound counterpart
- * is already live using the same logical CPU number which trips lockdep
- * debugging.
- */
-static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-static int
-cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS];
-
-#define exynos_cluster_usecnt(cluster) \
- (cpu_use_count[0][cluster] + \
- cpu_use_count[1][cluster] + \
- cpu_use_count[2][cluster] + \
- cpu_use_count[3][cluster])
-
-#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
-
-static int exynos_power_up(unsigned int cpu, unsigned int cluster)
+static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
{
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
@@ -88,127 +70,65 @@
cluster >= EXYNOS5420_NR_CLUSTERS)
return -EINVAL;
- /*
- * Since this is called with IRQs enabled, and no arch_spin_lock_irq
- * variant exists, we need to disable IRQs manually here.
- */
- local_irq_disable();
- arch_spin_lock(&exynos_mcpm_lock);
-
- cpu_use_count[cpu][cluster]++;
- if (cpu_use_count[cpu][cluster] == 1) {
- bool was_cluster_down =
- (exynos_cluster_usecnt(cluster) == 1);
-
- /*
- * Turn on the cluster (L2/COMMON) and then power on the
- * cores.
- */
- if (was_cluster_down)
- exynos_cluster_power_up(cluster);
-
- exynos_cpu_power_up(cpunr);
- } else if (cpu_use_count[cpu][cluster] != 2) {
- /*
- * The only possible values are:
- * 0 = CPU down
- * 1 = CPU (still) up
- * 2 = CPU requested to be up before it had a chance
- * to actually make itself down.
- * Any other value is a bug.
- */
- BUG();
- }
-
- arch_spin_unlock(&exynos_mcpm_lock);
- local_irq_enable();
-
+ exynos_cpu_power_up(cpunr);
return 0;
}
-/*
- * NOTE: This function requires the stack data to be visible through power down
- * and can only be executed on processors like A15 and A7 that hit the cache
- * with the C bit clear in the SCTLR register.
- */
-static void exynos_power_down(void)
+static int exynos_cluster_powerup(unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster;
- bool last_man = false, skip_wfi = false;
- unsigned int cpunr;
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ if (cluster >= EXYNOS5420_NR_CLUSTERS)
+ return -EINVAL;
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+ exynos_cluster_power_up(cluster);
+ return 0;
+}
+
+static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
cluster >= EXYNOS5420_NR_CLUSTERS);
+ exynos_cpu_power_down(cpunr);
+}
- __mcpm_cpu_going_down(cpu, cluster);
+static void exynos_cluster_powerdown_prepare(unsigned int cluster)
+{
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS);
+ exynos_cluster_power_down(cluster);
+}
- arch_spin_lock(&exynos_mcpm_lock);
- BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
- cpu_use_count[cpu][cluster]--;
- if (cpu_use_count[cpu][cluster] == 0) {
- exynos_cpu_power_down(cpunr);
+static void exynos_cpu_cache_disable(void)
+{
+ /* Disable and flush the local CPU cache. */
+ exynos_v7_exit_coherency_flush(louis);
+}
- if (exynos_cluster_unused(cluster)) {
- exynos_cluster_power_down(cluster);
- last_man = true;
- }
- } else if (cpu_use_count[cpu][cluster] == 1) {
+static void exynos_cluster_cache_disable(void)
+{
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
/*
- * A power_up request went ahead of us.
- * Even if we do not want to shut this CPU down,
- * the caller expects a certain state as if the WFI
- * was aborted. So let's continue with cache cleaning.
+ * On the Cortex-A15 we need to disable
+ * L2 prefetching before flushing the cache.
*/
- skip_wfi = true;
- } else {
- BUG();
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3\n\t"
+ "isb\n\t"
+ "dsb"
+ : : "r" (0x400));
}
- if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
- arch_spin_unlock(&exynos_mcpm_lock);
+ /* Flush all cache levels for this cluster. */
+ exynos_v7_exit_coherency_flush(all);
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
- /*
- * On the Cortex-A15 we need to disable
- * L2 prefetching before flushing the cache.
- */
- asm volatile(
- "mcr p15, 1, %0, c15, c0, 3\n\t"
- "isb\n\t"
- "dsb"
- : : "r" (0x400));
- }
-
- /* Flush all cache levels for this cluster. */
- exynos_v7_exit_coherency_flush(all);
-
- /*
- * Disable cluster-level coherency by masking
- * incoming snoops and DVM messages:
- */
- cci_disable_port_by_cpu(mpidr);
-
- __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
- } else {
- arch_spin_unlock(&exynos_mcpm_lock);
-
- /* Disable and flush the local CPU cache. */
- exynos_v7_exit_coherency_flush(louis);
- }
-
- __mcpm_cpu_down(cpu, cluster);
-
- /* Now we are prepared for power-down, do it: */
- if (!skip_wfi)
- wfi();
-
- /* Not dead at this point? Let our caller cope. */
+ /*
+ * Disable cluster-level coherency by masking
+ * incoming snoops and DVM messages:
+ */
+ cci_disable_port_by_cpu(read_cpuid_mpidr());
}
static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
@@ -222,10 +142,8 @@
/* Wait for the core state to be OFF */
while (tries--) {
- if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) {
- if ((exynos_cpu_power_state(cpunr) == 0))
- return 0; /* success: the CPU is halted */
- }
+ if ((exynos_cpu_power_state(cpunr) == 0))
+ return 0; /* success: the CPU is halted */
/* Otherwise, wait and retry: */
msleep(1);
@@ -234,63 +152,23 @@
return -ETIMEDOUT; /* timeout */
}
-static void exynos_powered_up(void)
+static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
- arch_spin_lock(&exynos_mcpm_lock);
- if (cpu_use_count[cpu][cluster] == 0)
- cpu_use_count[cpu][cluster] = 1;
- arch_spin_unlock(&exynos_mcpm_lock);
-}
-
-static void exynos_suspend(u64 residency)
-{
- unsigned int mpidr, cpunr;
-
- exynos_power_down();
-
- /*
- * Execution reaches here only if cpu did not power down.
- * Hence roll back the changes done in exynos_power_down function.
- *
- * CAUTION: "This function requires the stack data to be visible through
- * power down and can only be executed on processors like A15 and A7
- * that hit the cache with the C bit clear in the SCTLR register."
- */
- mpidr = read_cpuid_mpidr();
- cpunr = exynos_pmu_cpunr(mpidr);
-
- exynos_cpu_power_up(cpunr);
+ /* especially when resuming: make sure power control is set */
+ exynos_cpu_powerup(cpu, cluster);
}
static const struct mcpm_platform_ops exynos_power_ops = {
- .power_up = exynos_power_up,
- .power_down = exynos_power_down,
+ .cpu_powerup = exynos_cpu_powerup,
+ .cluster_powerup = exynos_cluster_powerup,
+ .cpu_powerdown_prepare = exynos_cpu_powerdown_prepare,
+ .cluster_powerdown_prepare = exynos_cluster_powerdown_prepare,
+ .cpu_cache_disable = exynos_cpu_cache_disable,
+ .cluster_cache_disable = exynos_cluster_cache_disable,
.wait_for_powerdown = exynos_wait_for_powerdown,
- .suspend = exynos_suspend,
- .powered_up = exynos_powered_up,
+ .cpu_is_up = exynos_cpu_is_up,
};
-static void __init exynos_mcpm_usage_count_init(void)
-{
- unsigned int mpidr, cpu, cluster;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
- pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
- BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
- cluster >= EXYNOS5420_NR_CLUSTERS);
-
- cpu_use_count[cpu][cluster] = 1;
-}
-
/*
* Enable cluster-level coherency, in preparation for turning on the MMU.
*/
@@ -302,19 +180,6 @@
"b cci_enable_port_for_self");
}
-static void __init exynos_cache_off(void)
-{
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
- /* disable L2 prefetching on the Cortex-A15 */
- asm volatile(
- "mcr p15, 1, %0, c15, c0, 3\n\t"
- "isb\n\t"
- "dsb"
- : : "r" (0x400));
- }
- exynos_v7_exit_coherency_flush(all);
-}
-
static const struct of_device_id exynos_dt_mcpm_match[] = {
{ .compatible = "samsung,exynos5420" },
{ .compatible = "samsung,exynos5800" },
@@ -370,13 +235,11 @@
*/
pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
- exynos_mcpm_usage_count_init();
-
ret = mcpm_platform_register(&exynos_power_ops);
if (!ret)
ret = mcpm_sync_init(exynos_pm_power_up_setup);
if (!ret)
- ret = mcpm_loopback(exynos_cache_off); /* turn on the CCI */
+ ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */
if (ret) {
iounmap(ns_sram_base_addr);
return ret;
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d2e9f12..ebd135b 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -126,6 +126,8 @@
*/
void exynos_cpu_power_down(int cpu)
{
+ u32 core_conf;
+
if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
/*
* Bypass power down for CPU0 during suspend. Check for
@@ -137,7 +139,10 @@
if (!(val & S5P_CORE_LOCAL_PWR_EN))
return;
}
- pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+
+ core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+ core_conf &= ~S5P_CORE_LOCAL_PWR_EN;
+ pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
/**
@@ -148,7 +153,12 @@
*/
void exynos_cpu_power_up(int cpu)
{
- pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ u32 core_conf = S5P_CORE_LOCAL_PWR_EN;
+
+ if (soc_is_exynos3250())
+ core_conf |= S5P_CORE_AUTOWAKEUP_EN;
+
+ pmu_raw_writel(core_conf,
EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
@@ -226,6 +236,10 @@
if (!of_machine_is_compatible("samsung,exynos3250"))
return;
+ while (!pmu_raw_readl(S5P_PMU_SPARE2))
+ udelay(10);
+ udelay(10);
+
val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
@@ -346,7 +360,10 @@
call_firmware_op(cpu_boot, core_id);
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ if (soc_is_exynos3250())
+ dsb_sev();
+ else
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
if (pen_release == -1)
break;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 5685250..cc75ab4 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -127,6 +127,8 @@
static void exynos_set_wakeupmask(long mask)
{
pmu_raw_writel(mask, S5P_WAKEUP_MASK);
+ if (soc_is_exynos3250())
+ pmu_raw_writel(0x0, S5P_WAKEUP_MASK2);
}
static void exynos_cpu_set_boot_vector(long flags)
@@ -140,7 +142,7 @@
{
int ret;
- exynos_set_wakeupmask(0x0000ff3e);
+ exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e);
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
@@ -157,8 +159,13 @@
void exynos_enter_aftr(void)
{
+ unsigned int cpuid = smp_processor_id();
+
cpu_pm_enter();
+ if (soc_is_exynos3250())
+ exynos_set_boot_flag(cpuid, C2_STATE);
+
exynos_pm_central_suspend();
if (of_machine_is_compatible("samsung,exynos4212") ||
@@ -178,6 +185,9 @@
exynos_pm_central_resume();
+ if (soc_is_exynos3250())
+ exynos_clear_boot_flag(cpuid, C2_STATE);
+
cpu_pm_exit();
}
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 37266a8..cbe56b35 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -37,6 +37,7 @@
struct clk *oscclk;
struct clk *clk[MAX_CLK_PER_DOMAIN];
struct clk *pclk[MAX_CLK_PER_DOMAIN];
+ struct clk *asb_clk[MAX_CLK_PER_DOMAIN];
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -45,14 +46,19 @@
void __iomem *base;
u32 timeout, pwr;
char *op;
+ int i;
pd = container_of(domain, struct exynos_pm_domain, pd);
base = pd->base;
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ if (IS_ERR(pd->asb_clk[i]))
+ break;
+ clk_prepare_enable(pd->asb_clk[i]);
+ }
+
/* Set oscclk before powering off a domain*/
if (!power_on) {
- int i;
-
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
@@ -81,8 +87,6 @@
/* Restore clocks after powering on a domain*/
if (power_on) {
- int i;
-
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
@@ -92,6 +96,12 @@
}
}
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ if (IS_ERR(pd->asb_clk[i]))
+ break;
+ clk_disable_unprepare(pd->asb_clk[i]);
+ }
+
return 0;
}
@@ -125,12 +135,21 @@
return -ENOMEM;
}
- pd->pd.name = kstrdup(np->name, GFP_KERNEL);
+ pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL);
pd->name = pd->pd.name;
pd->base = of_iomap(np, 0);
pd->pd.power_off = exynos_pd_power_off;
pd->pd.power_on = exynos_pd_power_on;
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ char clk_name[8];
+
+ snprintf(clk_name, sizeof(clk_name), "asb%d", i);
+ pd->asb_clk[i] = clk_get(dev, clk_name);
+ if (IS_ERR(pd->asb_clk[i]))
+ break;
+ }
+
pd->oscclk = clk_get(dev, "oscclk");
if (IS_ERR(pd->oscclk))
goto no_clk;
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index eb461e1..b761433 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -43,12 +43,14 @@
#define S5P_WAKEUP_STAT 0x0600
#define S5P_EINT_WAKEUP_MASK 0x0604
#define S5P_WAKEUP_MASK 0x0608
+#define S5P_WAKEUP_MASK2 0x0614
#define S5P_INFORM0 0x0800
#define S5P_INFORM1 0x0804
#define S5P_INFORM5 0x0814
#define S5P_INFORM6 0x0818
#define S5P_INFORM7 0x081C
+#define S5P_PMU_SPARE2 0x0908
#define S5P_PMU_SPARE3 0x090C
#define EXYNOS_IROM_DATA2 0x0988
@@ -182,6 +184,7 @@
#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8)
+#define S5P_CORE_AUTOWAKEUP_EN (1 << 31)
/* Only for EXYNOS4210 */
#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154
diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h
index f7b82f9..c284571 100644
--- a/arch/arm/mach-exynos/smc.h
+++ b/arch/arm/mach-exynos/smc.h
@@ -17,6 +17,8 @@
#define SMC_CMD_SLEEP (-3)
#define SMC_CMD_CPU1BOOT (-4)
#define SMC_CMD_CPU0AFTR (-5)
+#define SMC_CMD_SAVE (-6)
+#define SMC_CMD_SHUTDOWN (-7)
/* For CP15 Access */
#define SMC_CMD_C15RESUME (-11)
/* For L2 Cache Access */
@@ -32,4 +34,11 @@
#endif /* __ASSEMBLY__ */
+/* op type for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */
+#define OP_TYPE_CORE 0x0
+#define OP_TYPE_CLUSTER 0x1
+
+/* Power State required for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */
+#define SMC_POWERSTATE_IDLE 0x1
+
#endif
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 2146d91..3e6aea7 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -65,8 +65,6 @@
struct exynos_pm_data {
const struct exynos_wkup_irq *wkup_irq;
- struct sleep_save *extra_save;
- int num_extra_save;
unsigned int wake_disable_mask;
unsigned int *release_ret_regs;
@@ -77,7 +75,7 @@
int (*cpu_suspend)(unsigned long);
};
-struct exynos_pm_data *pm_data;
+static const struct exynos_pm_data *pm_data;
static int exynos5420_cpu_state;
static unsigned int exynos_pmu_spare3;
@@ -106,7 +104,7 @@
{ /* sentinel */ },
};
-unsigned int exynos_release_ret_regs[] = {
+static unsigned int exynos_release_ret_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
@@ -117,7 +115,7 @@
REG_TABLE_END,
};
-unsigned int exynos3250_release_ret_regs[] = {
+static unsigned int exynos3250_release_ret_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
@@ -130,7 +128,7 @@
REG_TABLE_END,
};
-unsigned int exynos5420_release_ret_regs[] = {
+static unsigned int exynos5420_release_ret_regs[] = {
EXYNOS_PAD_RET_DRAM_OPTION,
EXYNOS_PAD_RET_MAUDIO_OPTION,
EXYNOS_PAD_RET_JTAG_OPTION,
@@ -349,10 +347,6 @@
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
- if (pm_data->extra_save)
- s3c_pm_do_save(pm_data->extra_save,
- pm_data->num_extra_save);
-
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
@@ -475,10 +469,6 @@
/* For release retention */
exynos_pm_release_retention();
- if (pm_data->extra_save)
- s3c_pm_do_restore_core(pm_data->extra_save,
- pm_data->num_extra_save);
-
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (cpuid == ARM_CPU_PART_CORTEX_A9)
@@ -685,7 +675,7 @@
.cpu_suspend = exynos_cpu_suspend,
};
-static struct exynos_pm_data exynos5420_pm_data = {
+static const struct exynos_pm_data exynos5420_pm_data = {
.wkup_irq = exynos5250_wkup_irq,
.wake_disable_mask = (0x7F << 7) | (0x1F << 1),
.release_ret_regs = exynos5420_release_ret_regs,
@@ -736,7 +726,7 @@
if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL)))
pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
- pm_data = (struct exynos_pm_data *) match->data;
+ pm_data = (const struct exynos_pm_data *) match->data;
/* All wakeup disable */
tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0748747..3a3d3e9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -21,6 +21,7 @@
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
+ depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
@@ -50,6 +51,7 @@
config HAVE_IMX_GPC
bool
+ select PM_GENERIC_DOMAINS if PM
config HAVE_IMX_MMDC
bool
@@ -586,6 +588,7 @@
select ARM_GIC
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
+ select SMP_ON_UP if SMP
help
This enables support for Freescale Vybrid VF610 processor.
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index d04a430..469a150 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -119,6 +119,7 @@
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
+static unsigned int share_count_mipi_core_cfg;
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
@@ -246,6 +247,7 @@
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+ clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
if (cpu_is_imx6dl()) {
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
@@ -400,7 +402,7 @@
clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
@@ -415,7 +417,9 @@
clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 745caa1..029f59c 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,15 +10,25 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
+#include "hardware.h"
+#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
+#define GPC_PGC_GPU_PDN 0x260
+#define GPC_PGC_GPU_PUPSCR 0x264
+#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
@@ -27,6 +37,18 @@
#define IMR_NUM 4
+#define GPU_VPU_PUP_REQ BIT(1)
+#define GPU_VPU_PDN_REQ BIT(0)
+
+#define GPC_CLK_MAX 6
+
+struct pu_domain {
+ struct generic_pm_domain base;
+ struct regulator *reg;
+ struct clk *clk[GPC_CLK_MAX];
+ int num_clks;
+};
+
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
@@ -170,3 +192,194 @@
gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
}
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+
+static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ int iso, iso2sw;
+ u32 val;
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
+ iso = val & 0x3f;
+ iso2sw = (val >> 8) & 0x3f;
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Request GPC to power down GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PDN_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((iso + iso2sw) * 1000 / 66);
+}
+
+static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+
+ _imx6q_pm_pu_power_off(genpd);
+
+ if (pu->reg)
+ regulator_disable(pu->reg);
+
+ return 0;
+}
+
+static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+ int i, ret, sw, sw2iso;
+ u32 val;
+
+ if (pu->reg)
+ ret = regulator_enable(pu->reg);
+ if (pu->reg && ret) {
+ pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Enable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_prepare_enable(pu->clk[i]);
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
+ sw = val & 0x3f;
+ sw2iso = (val >> 8) & 0x3f;
+
+ /* Request GPC to power up GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PUP_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((sw + sw2iso) * 1000 / 66);
+
+ /* Disable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_disable_unprepare(pu->clk[i]);
+
+ return 0;
+}
+
+static struct generic_pm_domain imx6q_arm_domain = {
+ .name = "ARM",
+};
+
+static struct pu_domain imx6q_pu_domain = {
+ .base = {
+ .name = "PU",
+ .power_off = imx6q_pm_pu_power_off,
+ .power_on = imx6q_pm_pu_power_on,
+ .power_off_latency_ns = 25000,
+ .power_on_latency_ns = 2000000,
+ },
+};
+
+static struct generic_pm_domain imx6sl_display_domain = {
+ .name = "DISPLAY",
+};
+
+static struct generic_pm_domain *imx_gpc_domains[] = {
+ &imx6q_arm_domain,
+ &imx6q_pu_domain.base,
+ &imx6sl_display_domain,
+};
+
+static struct genpd_onecell_data imx_gpc_onecell_data = {
+ .domains = imx_gpc_domains,
+ .num_domains = ARRAY_SIZE(imx_gpc_domains),
+};
+
+static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
+{
+ struct clk *clk;
+ bool is_off;
+ int i;
+
+ imx6q_pu_domain.reg = pu_reg;
+
+ for (i = 0; ; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+ if (i >= GPC_CLK_MAX) {
+ dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
+ goto clk_err;
+ }
+ imx6q_pu_domain.clk[i] = clk;
+ }
+ imx6q_pu_domain.num_clks = i;
+
+ is_off = IS_ENABLED(CONFIG_PM);
+ if (is_off) {
+ _imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
+ } else {
+ /*
+ * Enable power if compiled without CONFIG_PM in case the
+ * bootloader disabled it.
+ */
+ imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+ }
+
+ pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+ return of_genpd_add_provider_onecell(dev->of_node,
+ &imx_gpc_onecell_data);
+
+clk_err:
+ while (i--)
+ clk_put(imx6q_pu_domain.clk[i]);
+ return -EINVAL;
+}
+
+#else
+static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
+{
+ return 0;
+}
+#endif /* CONFIG_PM_GENERIC_DOMAINS */
+
+static int imx_gpc_probe(struct platform_device *pdev)
+{
+ struct regulator *pu_reg;
+ int ret;
+
+ pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
+ if (PTR_ERR(pu_reg) == -ENODEV)
+ pu_reg = NULL;
+ if (IS_ERR(pu_reg)) {
+ ret = PTR_ERR(pu_reg);
+ dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
+ return ret;
+ }
+
+ return imx_gpc_genpd_init(&pdev->dev, pu_reg);
+}
+
+static const struct of_device_id imx_gpc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-gpc" },
+ { .compatible = "fsl,imx6sl-gpc" },
+ { }
+};
+
+static struct platform_driver imx_gpc_driver = {
+ .driver = {
+ .name = "imx-gpc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_gpc_dt_ids,
+ },
+ .probe = imx_gpc_probe,
+};
+
+static int __init imx_pgc_init(void)
+{
+ return platform_driver_register(&imx_gpc_driver);
+}
+subsys_initcall(imx_pgc_init);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 18301dc..0743e20 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -1,8 +1,11 @@
menuconfig ARCH_MESON
bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
select ARM_GIC
select CACHE_L2X0
+ select PINCTRL
+ select PINCTRL_MESON
if ARCH_MESON
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c1e4567..9747316 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -64,6 +64,20 @@
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.
+config MACH_ARMADA_39X
+ bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
+ select ARM_GIC
+ select ARMADA_39X_CLK
+ select CACHE_L2X0
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
+ select MACH_MVEBU_V7
+ select PINCTRL_ARMADA_39X
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Armada 39x SoC with device tree.
+
config MACH_ARMADA_XP
bool "Marvell Armada XP boards" if ARCH_MULTI_V7
select ARMADA_XP_CLK
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 31b66f2..afee908 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -232,3 +232,17 @@
.restart = mvebu_restart,
.dt_compat = armada_38x_dt_compat,
MACHINE_END
+
+static const char * const armada_39x_dt_compat[] __initconst = {
+ "marvell,armada390",
+ "marvell,armada398",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .init_irq = mvebu_init_irq,
+ .restart = mvebu_restart,
+ .dt_compat = armada_39x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 2ec1a42..df0a9cc 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -110,3 +110,5 @@
&mvebu_cortex_a9_smp_ops);
CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
&armada_38x_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp",
+ &armada_38x_smp_ops);
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index be9541e..166b18f 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -690,6 +690,9 @@
USE_PLATFORM_PM_SLEEP_OPS
.suspend_noirq = _od_suspend_noirq,
.resume_noirq = _od_resume_noirq,
+ .freeze_noirq = _od_suspend_noirq,
+ .thaw_noirq = _od_resume_noirq,
+ .restore_noirq = _od_resume_noirq,
}
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 8eb8592..e222314 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -20,6 +20,7 @@
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
#include "omap_hwmod_common_data.h"
+#include "hdq1w.h"
/* IP blocks */
@@ -516,6 +517,33 @@
.parent_hwmod = &am43xx_dss_core_hwmod,
};
+/* HDQ1W */
+static struct omap_hwmod_class_sysconfig am43xx_hdq1w_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0014,
+ .syss_offs = 0x0018,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_hdq1w_hwmod_class = {
+ .name = "hdq1w",
+ .sysc = &am43xx_hdq1w_sysc,
+ .reset = &omap_hdq1w_reset,
+};
+
+static struct omap_hwmod am43xx_hdq1w_hwmod = {
+ .name = "hdq1w",
+ .class = &am43xx_hdq1w_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -790,6 +818,13 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_hdq1w_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -889,6 +924,7 @@
&am43xx_l4_ls__dss,
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
+ &am43xx_l4_ls__hdq1w,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 16fe7a1..0e64c2f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1726,21 +1726,6 @@
.sysc = &dra7xx_timer_1ms_sysc,
};
-static struct omap_hwmod_class_sysconfig dra7xx_timer_secure_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_timer_secure_hwmod_class = {
- .name = "timer",
- .sysc = &dra7xx_timer_secure_sysc,
-};
-
static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
@@ -1804,7 +1789,7 @@
/* timer4 */
static struct omap_hwmod dra7xx_timer4_hwmod = {
.name = "timer4",
- .class = &dra7xx_timer_secure_hwmod_class,
+ .class = &dra7xx_timer_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "timer4_gfclk_mux",
.prcm = {
@@ -1921,6 +1906,66 @@
},
};
+/* timer13 */
+static struct omap_hwmod dra7xx_timer13_hwmod = {
+ .name = "timer13",
+ .class = &dra7xx_timer_hwmod_class,
+ .clkdm_name = "l4per3_clkdm",
+ .main_clk = "timer13_gfclk_mux",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* timer14 */
+static struct omap_hwmod dra7xx_timer14_hwmod = {
+ .name = "timer14",
+ .class = &dra7xx_timer_hwmod_class,
+ .clkdm_name = "l4per3_clkdm",
+ .main_clk = "timer14_gfclk_mux",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* timer15 */
+static struct omap_hwmod dra7xx_timer15_hwmod = {
+ .name = "timer15",
+ .class = &dra7xx_timer_hwmod_class,
+ .clkdm_name = "l4per3_clkdm",
+ .main_clk = "timer15_gfclk_mux",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* timer16 */
+static struct omap_hwmod dra7xx_timer16_hwmod = {
+ .name = "timer16",
+ .class = &dra7xx_timer_hwmod_class,
+ .clkdm_name = "l4per3_clkdm",
+ .main_clk = "timer16_gfclk_mux",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/*
* 'uart' class
*
@@ -3059,6 +3104,38 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per3 -> timer13 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_timer13_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer14 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer14 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_timer14_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer15 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer15 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_timer15_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer16 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = {
+ .master = &dra7xx_l4_per3_hwmod,
+ .slave = &dra7xx_timer16_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per1 -> uart1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = {
.master = &dra7xx_l4_per1_hwmod,
@@ -3295,6 +3372,10 @@
&dra7xx_l4_per1__timer9,
&dra7xx_l4_per1__timer10,
&dra7xx_l4_per1__timer11,
+ &dra7xx_l4_per3__timer13,
+ &dra7xx_l4_per3__timer14,
+ &dra7xx_l4_per3__timer15,
+ &dra7xx_l4_per3__timer16,
&dra7xx_l4_per1__uart1,
&dra7xx_l4_per1__uart2,
&dra7xx_l4_per1__uart3,
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index ad7b3e9..48df3b5 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -143,5 +143,6 @@
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
+#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0
#endif
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index f26fcdc..5b4ca3c 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -55,7 +55,7 @@
return !(val & BIT(pd));
}
-struct reset_control *rockchip_get_core_reset(int cpu)
+static struct reset_control *rockchip_get_core_reset(int cpu)
{
struct device *dev = get_cpu_device(cpu);
struct device_node *np;
@@ -201,7 +201,7 @@
return 0;
}
-static struct regmap_config rockchip_pmu_regmap_config = {
+static const struct regmap_config rockchip_pmu_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 50cb781..b07d886 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -75,9 +75,13 @@
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
&rk3288_pmu_pwr_mode_con);
- /* set bit 8 so that system will resume to FAST_BOOT_ADDR */
+ /*
+ * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
+ * PCLK_WDT_GATE - disable WDT during suspend.
+ */
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
- SGRF_FAST_BOOT_EN | SGRF_FAST_BOOT_EN_WRITE);
+ SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
+ | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
@@ -122,7 +126,8 @@
rk3288_pmu_pwr_mode_con);
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
- rk3288_sgrf_soc_con0 | SGRF_FAST_BOOT_EN_WRITE);
+ rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
+ | SGRF_FAST_BOOT_EN_WRITE);
}
static int rockchip_lpmode_enter(unsigned long arg)
@@ -209,6 +214,9 @@
memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
rk3288_bootram_sz);
+ regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH);
+ regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH);
+
return 0;
}
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 7c889c0..03ff31d 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -50,6 +50,8 @@
#define RK3288_SGRF_SOC_CON0 (0x0000)
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
+#define SGRF_PCLK_WDT_GATE BIT(6)
+#define SGRF_PCLK_WDT_GATE_WRITE BIT(22)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
@@ -63,6 +65,10 @@
/* PMU_WAKEUP_CFG1 bits */
#define PMU_ARMINT_WAKEUP_EN BIT(0)
+/* wait 30ms for OSC stable and 30ms for pmic stable */
+#define OSC_STABL_CNT_THRESH (32 * 30)
+#define PMU_STABL_CNT_THRESH (32 * 30)
+
enum rk3288_pwr_mode_con {
PMU_PWR_MODE_EN = 0,
PMU_CLK_CORE_SRC_GATE_EN,
diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
index 7bc6668..dcbe17f 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c64xx/crag6410.h
@@ -14,6 +14,7 @@
#include <mach/gpio-samsung.h>
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
+#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 10b913b..65c426b 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -554,6 +554,7 @@
static struct wm831x_pdata crag_pmic_pdata = {
.wm831x_num = 1,
+ .irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 2f36c85..347b6a5 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -69,10 +69,12 @@
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
+ select I2C
config ARCH_R8A7791
bool "R-Car M2-W (R8A77910)"
select ARCH_RCAR_GEN2
+ select I2C
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 03794b0..3631d8b 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,6 +35,8 @@
# Shared SoC family objects
obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
CFLAGS_setup-rcar-gen2.o += -march=armv7-a
+obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o
# SMP objects
smp-y := $(cpu-y)
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
new file mode 100644
index 0000000..384e6e9
--- /dev/null
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -0,0 +1,147 @@
+/*
+ * R-Car Generation 2 da9063/da9210 regulator quirk
+ *
+ * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
+ * da9210 regulators. Both regulators have their interrupt request lines tied
+ * to the same interrupt pin (IRQ2) on the SoC.
+ *
+ * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
+ * to assert their interrupt request lines. Hence as soon as one driver
+ * requests this irq, it gets stuck in an interrupt storm, as it only manages
+ * to deassert its own interrupt request line, and the other driver hasn't
+ * installed an interrupt handler yet.
+ *
+ * To handle this, install a quirk that masks the interrupts in both the
+ * da9063 and da9210. This quirk has to run after the i2c master driver has
+ * been initialized, but before the i2c slave drivers are initialized.
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/mfd/da9063/registers.h>
+
+
+#define IRQC_BASE 0xe61c0000
+#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */
+
+#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */
+
+static void __iomem *irqc;
+
+static const u8 da9063_mask_regs[] = {
+ DA9063_REG_IRQ_MASK_A,
+ DA9063_REG_IRQ_MASK_B,
+ DA9063_REG_IRQ_MASK_C,
+ DA9063_REG_IRQ_MASK_D,
+};
+
+/* DA9210 System Control and Event Registers */
+#define DA9210_REG_MASK_A 0x54
+#define DA9210_REG_MASK_B 0x55
+
+static const u8 da9210_mask_regs[] = {
+ DA9210_REG_MASK_A,
+ DA9210_REG_MASK_B,
+};
+
+static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
+ unsigned int nregs)
+{
+ unsigned int i;
+
+ dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+
+ for (i = 0; i < nregs; i++) {
+ int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
+ if (error) {
+ dev_err(&client->dev, "i2c error %d\n", error);
+ return;
+ }
+ }
+}
+
+static int regulator_quirk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct i2c_client *client;
+ u32 mon;
+
+ mon = ioread32(irqc + IRQC_MONITOR);
+ dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
+ if (mon & REGULATOR_IRQ_MASK)
+ goto remove;
+
+ if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type)
+ return 0;
+
+ client = to_i2c_client(dev);
+ dev_dbg(dev, "Detected %s\n", client->name);
+
+ if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
+ da9xxx_mask_irqs(client, da9063_mask_regs,
+ ARRAY_SIZE(da9063_mask_regs));
+ else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
+ da9xxx_mask_irqs(client, da9210_mask_regs,
+ ARRAY_SIZE(da9210_mask_regs));
+
+ mon = ioread32(irqc + IRQC_MONITOR);
+ if (mon & REGULATOR_IRQ_MASK)
+ goto remove;
+
+ return 0;
+
+remove:
+ dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
+
+ bus_unregister_notifier(&i2c_bus_type, nb);
+ iounmap(irqc);
+ return 0;
+}
+
+static struct notifier_block regulator_quirk_nb = {
+ .notifier_call = regulator_quirk_notify
+};
+
+static int __init rcar_gen2_regulator_quirk(void)
+{
+ u32 mon;
+
+ if (!of_machine_is_compatible("renesas,koelsch") &&
+ !of_machine_is_compatible("renesas,lager"))
+ return -ENODEV;
+
+ irqc = ioremap(IRQC_BASE, PAGE_SIZE);
+ if (!irqc)
+ return -ENOMEM;
+
+ mon = ioread32(irqc + IRQC_MONITOR);
+ if (mon & REGULATOR_IRQ_MASK) {
+ pr_debug("%s: IRQ2 is not asserted, not installing quirk\n",
+ __func__);
+ iounmap(irqc);
+ return 0;
+ }
+
+ pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n");
+
+ bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb);
+ return 0;
+}
+
+arch_initcall(rcar_gen2_regulator_quirk);
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 51464cc..5d13595 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -21,6 +21,7 @@
#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
@@ -195,7 +196,7 @@
of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
#ifdef CONFIG_DMA_CMA
- if (mrc.size)
+ if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size))
dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
&rcar_gen2_dma_contiguous, true);
#endif
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 30b9933..5cedcf5 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/of_address.h>
#include <linux/vexpress.h>
@@ -36,163 +35,102 @@
#define KFC_CFG_W 0x2c
#define DCS_CFG_R 0x30
-/*
- * We can't use regular spinlocks. In the switcher case, it is possible
- * for an outbound CPU to call power_down() while its inbound counterpart
- * is already live using the same logical CPU number which trips lockdep
- * debugging.
- */
-static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
static void __iomem *dcscb_base;
-static int dcscb_use_count[4][2];
static int dcscb_allcpus_mask[2];
-static int dcscb_power_up(unsigned int cpu, unsigned int cluster)
+static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster)
{
unsigned int rst_hold, cpumask = (1 << cpu);
- unsigned int all_mask;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
- if (cpu >= 4 || cluster >= 2)
+ if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster]))
return -EINVAL;
- all_mask = dcscb_allcpus_mask[cluster];
-
- /*
- * Since this is called with IRQs enabled, and no arch_spin_lock_irq
- * variant exists, we need to disable IRQs manually here.
- */
- local_irq_disable();
- arch_spin_lock(&dcscb_lock);
-
- dcscb_use_count[cpu][cluster]++;
- if (dcscb_use_count[cpu][cluster] == 1) {
- rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
- if (rst_hold & (1 << 8)) {
- /* remove cluster reset and add individual CPU's reset */
- rst_hold &= ~(1 << 8);
- rst_hold |= all_mask;
- }
- rst_hold &= ~(cpumask | (cpumask << 4));
- writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
- } else if (dcscb_use_count[cpu][cluster] != 2) {
- /*
- * The only possible values are:
- * 0 = CPU down
- * 1 = CPU (still) up
- * 2 = CPU requested to be up before it had a chance
- * to actually make itself down.
- * Any other value is a bug.
- */
- BUG();
- }
-
- arch_spin_unlock(&dcscb_lock);
- local_irq_enable();
-
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ rst_hold &= ~(cpumask | (cpumask << 4));
+ writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
return 0;
}
-static void dcscb_power_down(void)
+static int dcscb_cluster_powerup(unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask;
- bool last_man = false, skip_wfi = false;
+ unsigned int rst_hold;
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- cpumask = (1 << cpu);
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ if (cluster >= 2)
+ return -EINVAL;
+
+ /* remove cluster reset and add individual CPU's reset */
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ rst_hold &= ~(1 << 8);
+ rst_hold |= dcscb_allcpus_mask[cluster];
+ writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+ return 0;
+}
+
+static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int rst_hold;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
- BUG_ON(cpu >= 4 || cluster >= 2);
+ BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster]));
- all_mask = dcscb_allcpus_mask[cluster];
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ rst_hold |= (1 << cpu);
+ writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+}
- __mcpm_cpu_going_down(cpu, cluster);
+static void dcscb_cluster_powerdown_prepare(unsigned int cluster)
+{
+ unsigned int rst_hold;
- arch_spin_lock(&dcscb_lock);
- BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
- dcscb_use_count[cpu][cluster]--;
- if (dcscb_use_count[cpu][cluster] == 0) {
- rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
- rst_hold |= cpumask;
- if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) {
- rst_hold |= (1 << 8);
- last_man = true;
- }
- writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
- } else if (dcscb_use_count[cpu][cluster] == 1) {
- /*
- * A power_up request went ahead of us.
- * Even if we do not want to shut this CPU down,
- * the caller expects a certain state as if the WFI
- * was aborted. So let's continue with cache cleaning.
- */
- skip_wfi = true;
- } else
- BUG();
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ BUG_ON(cluster >= 2);
- if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
- arch_spin_unlock(&dcscb_lock);
+ rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+ rst_hold |= (1 << 8);
+ writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+}
- /* Flush all cache levels for this cluster. */
- v7_exit_coherency_flush(all);
+static void dcscb_cpu_cache_disable(void)
+{
+ /* Disable and flush the local CPU cache. */
+ v7_exit_coherency_flush(louis);
+}
- /*
- * A full outer cache flush could be needed at this point
- * on platforms with such a cache, depending on where the
- * outer cache sits. In some cases the notion of a "last
- * cluster standing" would need to be implemented if the
- * outer cache is shared across clusters. In any case, when
- * the outer cache needs flushing, there is no concurrent
- * access to the cache controller to worry about and no
- * special locking besides what is already provided by the
- * MCPM state machinery is needed.
- */
+static void dcscb_cluster_cache_disable(void)
+{
+ /* Flush all cache levels for this cluster. */
+ v7_exit_coherency_flush(all);
- /*
- * Disable cluster-level coherency by masking
- * incoming snoops and DVM messages:
- */
- cci_disable_port_by_cpu(mpidr);
+ /*
+ * A full outer cache flush could be needed at this point
+ * on platforms with such a cache, depending on where the
+ * outer cache sits. In some cases the notion of a "last
+ * cluster standing" would need to be implemented if the
+ * outer cache is shared across clusters. In any case, when
+ * the outer cache needs flushing, there is no concurrent
+ * access to the cache controller to worry about and no
+ * special locking besides what is already provided by the
+ * MCPM state machinery is needed.
+ */
- __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
- } else {
- arch_spin_unlock(&dcscb_lock);
-
- /* Disable and flush the local CPU cache. */
- v7_exit_coherency_flush(louis);
- }
-
- __mcpm_cpu_down(cpu, cluster);
-
- /* Now we are prepared for power-down, do it: */
- dsb();
- if (!skip_wfi)
- wfi();
-
- /* Not dead at this point? Let our caller cope. */
+ /*
+ * Disable cluster-level coherency by masking
+ * incoming snoops and DVM messages:
+ */
+ cci_disable_port_by_cpu(read_cpuid_mpidr());
}
static const struct mcpm_platform_ops dcscb_power_ops = {
- .power_up = dcscb_power_up,
- .power_down = dcscb_power_down,
+ .cpu_powerup = dcscb_cpu_powerup,
+ .cluster_powerup = dcscb_cluster_powerup,
+ .cpu_powerdown_prepare = dcscb_cpu_powerdown_prepare,
+ .cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare,
+ .cpu_cache_disable = dcscb_cpu_cache_disable,
+ .cluster_cache_disable = dcscb_cluster_cache_disable,
};
-static void __init dcscb_usage_count_init(void)
-{
- unsigned int mpidr, cpu, cluster;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
- pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
- BUG_ON(cpu >= 4 || cluster >= 2);
- dcscb_use_count[cpu][cluster] = 1;
-}
-
extern void dcscb_power_up_setup(unsigned int affinity_level);
static int __init dcscb_init(void)
@@ -213,7 +151,6 @@
cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1;
dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1;
- dcscb_usage_count_init();
ret = mcpm_platform_register(&dcscb_power_ops);
if (!ret)
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 2fb78b4..b3328cd 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/irqchip/arm-gic.h>
@@ -44,101 +43,36 @@
static void __iomem *scc;
-/*
- * We can't use regular spinlocks. In the switcher case, it is possible
- * for an outbound CPU to call power_down() after its inbound counterpart
- * is already live using the same logical CPU number which trips lockdep
- * debugging.
- */
-static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
#define TC2_CLUSTERS 2
#define TC2_MAX_CPUS_PER_CLUSTER 3
static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
-/* Keep per-cpu usage count to cope with unordered up/down requests */
-static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
-
-#define tc2_cluster_unused(cluster) \
- (!tc2_pm_use_count[0][cluster] && \
- !tc2_pm_use_count[1][cluster] && \
- !tc2_pm_use_count[2][cluster])
-
-static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
+static int tc2_pm_cpu_powerup(unsigned int cpu, unsigned int cluster)
{
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
return -EINVAL;
-
- /*
- * Since this is called with IRQs enabled, and no arch_spin_lock_irq
- * variant exists, we need to disable IRQs manually here.
- */
- local_irq_disable();
- arch_spin_lock(&tc2_pm_lock);
-
- if (tc2_cluster_unused(cluster))
- ve_spc_powerdown(cluster, false);
-
- tc2_pm_use_count[cpu][cluster]++;
- if (tc2_pm_use_count[cpu][cluster] == 1) {
- ve_spc_set_resume_addr(cluster, cpu,
- virt_to_phys(mcpm_entry_point));
- ve_spc_cpu_wakeup_irq(cluster, cpu, true);
- } else if (tc2_pm_use_count[cpu][cluster] != 2) {
- /*
- * The only possible values are:
- * 0 = CPU down
- * 1 = CPU (still) up
- * 2 = CPU requested to be up before it had a chance
- * to actually make itself down.
- * Any other value is a bug.
- */
- BUG();
- }
-
- arch_spin_unlock(&tc2_pm_lock);
- local_irq_enable();
-
+ ve_spc_set_resume_addr(cluster, cpu,
+ virt_to_phys(mcpm_entry_point));
+ ve_spc_cpu_wakeup_irq(cluster, cpu, true);
return 0;
}
-static void tc2_pm_down(u64 residency)
+static int tc2_pm_cluster_powerup(unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster;
- bool last_man = false, skip_wfi = false;
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ if (cluster >= TC2_CLUSTERS)
+ return -EINVAL;
+ ve_spc_powerdown(cluster, false);
+ return 0;
+}
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
+static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
-
- __mcpm_cpu_going_down(cpu, cluster);
-
- arch_spin_lock(&tc2_pm_lock);
- BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
- tc2_pm_use_count[cpu][cluster]--;
- if (tc2_pm_use_count[cpu][cluster] == 0) {
- ve_spc_cpu_wakeup_irq(cluster, cpu, true);
- if (tc2_cluster_unused(cluster)) {
- ve_spc_powerdown(cluster, true);
- ve_spc_global_wakeup_irq(true);
- last_man = true;
- }
- } else if (tc2_pm_use_count[cpu][cluster] == 1) {
- /*
- * A power_up request went ahead of us.
- * Even if we do not want to shut this CPU down,
- * the caller expects a certain state as if the WFI
- * was aborted. So let's continue with cache cleaning.
- */
- skip_wfi = true;
- } else
- BUG();
-
+ ve_spc_cpu_wakeup_irq(cluster, cpu, true);
/*
* If the CPU is committed to power down, make sure
* the power controller will be in charge of waking it
@@ -146,55 +80,38 @@
* to the CPU by disabling the GIC CPU IF to prevent wfi
* from completing execution behind power controller back
*/
- if (!skip_wfi)
- gic_cpu_if_down();
-
- if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
- arch_spin_unlock(&tc2_pm_lock);
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
- /*
- * On the Cortex-A15 we need to disable
- * L2 prefetching before flushing the cache.
- */
- asm volatile(
- "mcr p15, 1, %0, c15, c0, 3 \n\t"
- "isb \n\t"
- "dsb "
- : : "r" (0x400) );
- }
-
- v7_exit_coherency_flush(all);
-
- cci_disable_port_by_cpu(mpidr);
-
- __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
- } else {
- /*
- * If last man then undo any setup done previously.
- */
- if (last_man) {
- ve_spc_powerdown(cluster, false);
- ve_spc_global_wakeup_irq(false);
- }
-
- arch_spin_unlock(&tc2_pm_lock);
-
- v7_exit_coherency_flush(louis);
- }
-
- __mcpm_cpu_down(cpu, cluster);
-
- /* Now we are prepared for power-down, do it: */
- if (!skip_wfi)
- wfi();
-
- /* Not dead at this point? Let our caller cope. */
+ gic_cpu_if_down();
}
-static void tc2_pm_power_down(void)
+static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster)
{
- tc2_pm_down(0);
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS);
+ ve_spc_powerdown(cluster, true);
+ ve_spc_global_wakeup_irq(true);
+}
+
+static void tc2_pm_cpu_cache_disable(void)
+{
+ v7_exit_coherency_flush(louis);
+}
+
+static void tc2_pm_cluster_cache_disable(void)
+{
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
+ /*
+ * On the Cortex-A15 we need to disable
+ * L2 prefetching before flushing the cache.
+ */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3 \n\t"
+ "isb \n\t"
+ "dsb "
+ : : "r" (0x400) );
+ }
+
+ v7_exit_coherency_flush(all);
+ cci_disable_port_by_cpu(read_cpuid_mpidr());
}
static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
@@ -217,27 +134,21 @@
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
- /*
- * Only examine the hardware state if the target CPU has
- * caught up at least as far as tc2_pm_down():
- */
- if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
- pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
- __func__, cpu, cluster,
- readl_relaxed(scc + RESET_CTRL));
+ pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+ __func__, cpu, cluster,
+ readl_relaxed(scc + RESET_CTRL));
- /*
- * We need the CPU to reach WFI, but the power
- * controller may put the cluster in reset and
- * power it off as soon as that happens, before
- * we have a chance to see STANDBYWFI.
- *
- * So we need to check for both conditions:
- */
- if (tc2_core_in_reset(cpu, cluster) ||
- ve_spc_cpu_in_wfi(cpu, cluster))
- return 0; /* success: the CPU is halted */
- }
+ /*
+ * We need the CPU to reach WFI, but the power
+ * controller may put the cluster in reset and
+ * power it off as soon as that happens, before
+ * we have a chance to see STANDBYWFI.
+ *
+ * So we need to check for both conditions:
+ */
+ if (tc2_core_in_reset(cpu, cluster) ||
+ ve_spc_cpu_in_wfi(cpu, cluster))
+ return 0; /* success: the CPU is halted */
/* Otherwise, wait and retry: */
msleep(POLL_MSEC);
@@ -246,72 +157,40 @@
return -ETIMEDOUT; /* timeout */
}
-static void tc2_pm_suspend(u64 residency)
+static void tc2_pm_cpu_suspend_prepare(unsigned int cpu, unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
- tc2_pm_down(residency);
}
-static void tc2_pm_powered_up(void)
+static void tc2_pm_cpu_is_up(unsigned int cpu, unsigned int cluster)
{
- unsigned int mpidr, cpu, cluster;
- unsigned long flags;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
-
- local_irq_save(flags);
- arch_spin_lock(&tc2_pm_lock);
-
- if (tc2_cluster_unused(cluster)) {
- ve_spc_powerdown(cluster, false);
- ve_spc_global_wakeup_irq(false);
- }
-
- if (!tc2_pm_use_count[cpu][cluster])
- tc2_pm_use_count[cpu][cluster] = 1;
-
ve_spc_cpu_wakeup_irq(cluster, cpu, false);
ve_spc_set_resume_addr(cluster, cpu, 0);
+}
- arch_spin_unlock(&tc2_pm_lock);
- local_irq_restore(flags);
+static void tc2_pm_cluster_is_up(unsigned int cluster)
+{
+ pr_debug("%s: cluster %u\n", __func__, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS);
+ ve_spc_powerdown(cluster, false);
+ ve_spc_global_wakeup_irq(false);
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
- .power_up = tc2_pm_power_up,
- .power_down = tc2_pm_power_down,
+ .cpu_powerup = tc2_pm_cpu_powerup,
+ .cluster_powerup = tc2_pm_cluster_powerup,
+ .cpu_suspend_prepare = tc2_pm_cpu_suspend_prepare,
+ .cpu_powerdown_prepare = tc2_pm_cpu_powerdown_prepare,
+ .cluster_powerdown_prepare = tc2_pm_cluster_powerdown_prepare,
+ .cpu_cache_disable = tc2_pm_cpu_cache_disable,
+ .cluster_cache_disable = tc2_pm_cluster_cache_disable,
.wait_for_powerdown = tc2_pm_wait_for_powerdown,
- .suspend = tc2_pm_suspend,
- .powered_up = tc2_pm_powered_up,
+ .cpu_is_up = tc2_pm_cpu_is_up,
+ .cluster_is_up = tc2_pm_cluster_is_up,
};
-static bool __init tc2_pm_usage_count_init(void)
-{
- unsigned int mpidr, cpu, cluster;
-
- mpidr = read_cpuid_mpidr();
- cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-
- pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
- if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
- pr_err("%s: boot CPU is out of bound!\n", __func__);
- return false;
- }
- tc2_pm_use_count[cpu][cluster] = 1;
- return true;
-}
-
/*
* Enable cluster-level coherency, in preparation for turning on the MMU.
*/
@@ -323,23 +202,9 @@
" b cci_enable_port_for_self ");
}
-static void __init tc2_cache_off(void)
-{
- pr_info("TC2: disabling cache during MCPM loopback test\n");
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
- /* disable L2 prefetching on the Cortex-A15 */
- asm volatile(
- "mcr p15, 1, %0, c15, c0, 3 \n\t"
- "isb \n\t"
- "dsb "
- : : "r" (0x400) );
- }
- v7_exit_coherency_flush(all);
- cci_disable_port_by_cpu(read_cpuid_mpidr());
-}
-
static int __init tc2_pm_init(void)
{
+ unsigned int mpidr, cpu, cluster;
int ret, irq;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
@@ -379,14 +244,20 @@
if (!cci_probed())
return -ENODEV;
- if (!tc2_pm_usage_count_init())
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
+ pr_err("%s: boot CPU is out of bound!\n", __func__);
return -EINVAL;
+ }
ret = mcpm_platform_register(&tc2_pm_power_ops);
if (!ret) {
mcpm_sync_init(tc2_pm_power_up_setup);
/* test if we can (re)enable the CCI on our own */
- BUG_ON(mcpm_loopback(tc2_cache_off) != 0);
+ BUG_ON(mcpm_loopback(tc2_pm_cluster_cache_disable) != 0);
pr_info("TC2 power management initialized\n");
}
return ret;
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 0958b69..e98d15e 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -142,7 +142,7 @@
&pdev->dev);
const struct imx_weim_devtype *devtype = of_id->data;
struct device_node *child;
- int ret;
+ int ret, have_child = 0;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@@ -155,14 +155,15 @@
continue;
ret = weim_timing_setup(child, base, devtype);
- if (ret) {
- dev_err(&pdev->dev, "%s set timing failed.\n",
+ if (ret)
+ dev_warn(&pdev->dev, "%s set timing failed.\n",
child->full_name);
- return ret;
- }
+ else
+ have_child = 1;
}
- ret = of_platform_populate(pdev->dev.of_node,
+ if (have_child)
+ ret = of_platform_populate(pdev->dev.of_node,
of_default_bus_match_table,
NULL, &pdev->dev);
if (ret)
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index b690cdb..8780868 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -248,6 +248,9 @@
#define IMX6QDL_PLL6_BYPASS 235
#define IMX6QDL_PLL7_BYPASS 236
#define IMX6QDL_CLK_GPT_3M 237
-#define IMX6QDL_CLK_END 238
+#define IMX6QDL_CLK_VIDEO_27M 238
+#define IMX6QDL_CLK_MIPI_CORE_CFG 239
+#define IMX6QDL_CLK_MIPI_IPG 240
+#define IMX6QDL_CLK_END 241
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index c877cad..d16f4c8 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -207,6 +207,7 @@
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6)
+#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4
#define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4)