Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper:
- mvebu
- merge armada 375, 380, 385 boards (mvebu/dt-3xx)
- kirkwood
- Add many Synology NAS boards
- add board HP T5325
- add L2 cache node
- add system-controller node
- add audio node
- dove
- add pinctrl and global-config register
Depends:
- tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes)
- removed dove PMU interrupt controller
Conflicts:
- mvebu/soc (arch/arm/boot/dts/Makefile)
- add/add conflict.
- move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD)
* tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu:
ARM: kirkwood: Add dts file describing HP T5325 thin client
ARM: kirkwood: Add i2c alias so setting bus number
ARM: kirkwood: Add audio node to kirkwood.dtsi
ARM: mvebu: select dtbs from MACH_ARMADA_*
ARM: dove: add global-config register node
ARM: dove: add additional pinctrl registers
ARM: mvebu: Instantiate system controller in kirkwood.dtsi
ARM: kirkwood: Instantiate L2 cache from DT.
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
ARM: Kirkwood: Add support for many Synology NAS devices
DT: i2c: Trivial: Add sii,s35390a
DT: Vendor prefixes: Add ricoh, qnap, sii and synology
ARM: dove: dt: revert PMU interrupt controller node
ARM: mvebu: add Device Tree for the Armada 385 DB board
ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs
ARM: mvebu: add Device Tree for the Armada 375 DB board
ARM: mvebu: add Device Tree description of the Armada 375 SoC
ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260
Conflicts:
Documentation/devicetree/bindings/vendor-prefixes.txt
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 580f9ab..489959d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -91,6 +91,18 @@
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-ds110jv10.dtb \
+ kirkwood-ds111.dtb \
+ kirkwood-ds209.dtb \
+ kirkwood-ds210.dtb \
+ kirkwood-ds212.dtb \
+ kirkwood-ds212j.dtb \
+ kirkwood-ds409.dtb \
+ kirkwood-ds409slim.dtb \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
@@ -116,8 +128,12 @@
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-a0.dtb \
kirkwood-rd88f6281-a1.dtb \
+ kirkwood-rs212.dtb \
+ kirkwood-rs409.dtb \
+ kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
+ kirkwood-t5325.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb \
@@ -125,17 +141,6 @@
kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
- armada-370-mirabox.dtb \
- armada-370-netgear-rn102.dtb \
- armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb \
- armada-xp-axpwifiap.dtb \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-matrix.dtb \
- armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
imx25-karo-tx25.dtb \
@@ -361,6 +366,23 @@
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+ armada-370-db.dtb \
+ armada-370-mirabox.dtb \
+ armada-370-netgear-rn102.dtb \
+ armada-370-netgear-rn104.dtb \
+ armada-370-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+ armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+ armada-xp-axpwifiap.dtb \
+ armada-xp-db.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-netgear-rn2120.dtb \
+ armada-xp-matrix.dtb \
+ armada-xp-openblocks-ax3-4.dtb
targets += dtbs
targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
new file mode 100644
index 0000000..9378d31
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -0,0 +1,130 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+ model = "Marvell Armada 375 Development Board";
+ compatible = "marvell,a375-db", "marvell,armada375";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ /*
+ * SPI conflicts with NAND, so we disable it
+ * here, and select NAND as the enabled device
+ * by default.
+ */
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ };
+
+ i2c@11100 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ };
+
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+ pinctrl {
+ sdio_st_pins: sdio-st-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+
+ nand: nand@d0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+
+ mvsdio@d4000 {
+ pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
new file mode 100644
index 0000000..3877693
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -0,0 +1,464 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+ model = "Marvell Armada 375 family SoC";
+ compatible = "marvell,armada375";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ clocks {
+ /* 2 GHz fixed main PLL */
+ mainpll: mainpll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2000000000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&gic>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ L2: cache-controller@8000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x8000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer@c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xc600 0x20>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+ clocks = <&coreclk 2>;
+ };
+
+ gic: interrupt-controller@d000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0xd000 0x1000>,
+ <0xc100 0x100>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi@10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ serial@12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ serial@12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ pinctrl {
+ compatible = "marvell,mv88f6720-pinctrl";
+ reg = <0x18000 0x24>;
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp14", "mpp15";
+ marvell,function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp61", "mpp62";
+ marvell,function = "i2c1";
+ };
+
+ nand_pins: nand-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13";
+ marvell,function = "nand";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29";
+ marvell,function = "sd";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp4",
+ "mpp5", "mpp8", "mpp9";
+ marvell,function = "spi0";
+ };
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio2: gpio@18180 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-375-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,armada-375-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller@20000 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+ reg = <0x20300 0x30>, <0x21040 0x30>;
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpic 5>,
+ <&mpic 6>;
+ clocks = <&coreclk 0>;
+ };
+
+ xor@60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60A00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ xor@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gateclk 23>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ sata@a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x5000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 14>, <&gateclk 20>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ nand@d0000 {
+ compatible = "marvell,armada370-nand";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ mvsdio@d4000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0xd4000 0x200>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 17>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+
+ coreclk: mvebu-sar@e8204 {
+ compatible = "marvell,armada-375-core-clock";
+ reg = <0xe8204 0x04>;
+ #clock-cells = <1>;
+ };
+
+ coredivclk: corediv-clock@e8250 {
+ compatible = "marvell,armada-375-corediv-clock";
+ reg = <0xe8250 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
new file mode 100644
index 0000000..068031f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+ model = "Marvell Armada 380 family SoC";
+ compatible = "marvell,armada380", "marvell,armada38x";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ pinctrl {
+ compatible = "marvell,mv88f6810-pinctrl";
+ reg = <0x18000 0x20>;
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */>;
+
+ /* x1 port */
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
new file mode 100644
index 0000000..01b6cc7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -0,0 +1,101 @@
+/*
+ * Device Tree file for Marvell Armada 385 evaluation board
+ * (DB-88F6820)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+ model = "Marvell Armada 385 Development Board";
+ compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada38x";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@11100 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
new file mode 100644
index 0000000..e2919f0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -0,0 +1,149 @@
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+ model = "Marvell Armada 385 family SoC";
+ compatible = "marvell,armada385", "marvell,armada38x";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ pinctrl {
+ compatible = "marvell,mv88f6820-pinctrl";
+ reg = <0x18000 0x20>;
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+ 0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO */>;
+
+ /*
+ * This port can be either x4 or x1. When
+ * configured in x4 by the bootloader, then
+ * pcie@4,0 is not available.
+ */
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ /* x1 port */
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ /*
+ * x1 port only available when pcie@1,0 is
+ * configured as a x1 port
+ */
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
new file mode 100644
index 0000000..812ce28
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -0,0 +1,351 @@
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+ model = "Marvell Armada 38x family SoC";
+ compatible = "marvell,armada38x";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ eth0 = ð0;
+ eth1 = ð1;
+ eth2 = ð2;
+ };
+
+ soc {
+ compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&gic>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+ };
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ L2: cache-controller@8000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x8000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer@c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xc600 0x20>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+ clocks = <&coreclk 2>;
+ };
+
+ gic: interrupt-controller@d000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0xd000 0x1000>,
+ <0xc100 0x100>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi@10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ serial@12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ serial@12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ pinctrl {
+ compatible = "marvell,mv88f6820-pinctrl";
+ reg = <0x18000 0x20>;
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ ngpios = <28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-380-system-controller",
+ "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,armada-380-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ coreclk: mvebu-sar@18600 {
+ compatible = "marvell,armada-380-core-clock";
+ reg = <0x18600 0x04>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller@20000 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-380-timer",
+ "marvell,armada-xp-timer";
+ reg = <0x20300 0x30>, <0x21040 0x30>;
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpic 5>,
+ <&mpic 6>;
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ eth1: ethernet@30000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x30000 0x4000>;
+ interrupts-extended = <&mpic 10>;
+ clocks = <&gateclk 3>;
+ status = "disabled";
+ };
+
+ eth2: ethernet@34000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x34000 0x4000>;
+ interrupts-extended = <&mpic 12>;
+ clocks = <&gateclk 2>;
+ status = "disabled";
+ };
+
+ xor@60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ xor@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gateclk 28>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ eth0: ethernet@70000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x70000 0x4000>;
+ interrupts-extended = <&mpic 8>;
+ clocks = <&gateclk 4>;
+ status = "disabled";
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x72004 0x4>;
+ };
+ };
+ };
+
+ clocks {
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 6660968..9480cf8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -23,6 +23,7 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ eth3 = ð3;
};
cpus {
@@ -291,7 +292,7 @@
interrupts = <91>;
};
- ethernet@34000 {
+ eth3: ethernet@34000 {
compatible = "marvell,armada-370-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index a88ed73..43cbdc2 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -387,18 +387,11 @@
#clock-cells = <1>;
};
- pmu_intc: pmu-interrupt-ctrl@d0050 {
- compatible = "marvell,dove-pmu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd0050 0x8>;
- interrupts = <33>;
- marvell,#interrupts = <7>;
- };
-
pinctrl: pin-ctrl@d0200 {
compatible = "marvell,dove-pinctrl";
- reg = <0xd0200 0x10>;
+ reg = <0xd0200 0x14>,
+ <0xd0440 0x04>,
+ <0xd802c 0x08>;
clocks = <&gate_clk 22>;
pmx_gpio_0: pmx-gpio-0 {
@@ -618,8 +611,12 @@
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
- interrupt-parent = <&pmu_intc>;
- interrupts = <5>;
+ };
+
+ gconf: global-config@e802c {
+ compatible = "marvell,dove-global-config",
+ "syscon";
+ reg = <0xe802c 0x14>;
};
gpio2: gpio-ctrl@e8400 {
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 0000000..772092c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS109, DS110, DS110jv20";
+ compatible = "synology,ds109", "synology,ds110jv20",
+ "synology,ds110", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 0000000..aabafbe
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS110j v10 and v30";
+ compatible = "synology,ds110jv10", "synology,ds110jv30",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 0000000..16ec7fb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 0000000..cff1b23
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-30 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 0000000..3304119
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS209";
+ compatible = "synology,ds209", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-31 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 0000000..6052eaa
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,46 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS210 v10, v20, v30, DS211j";
+ compatible = "synology,ds210jv10", "synology,ds210jv20",
+ "synology,ds210jv30", "synology,ds211j",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+
+ regulators-hdd-31 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 0000000..7f76cd3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+ compatible = "synology,ds212", "synology,ds212pv10",
+ "synology,ds212pv10", "synology,ds212pv20",
+ "synology,ds213airv10", "synology,ds213v10",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 0000000..1f83a00
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS212j v10, v20";
+ compatible = "synology,ds212jv10", "synology,ds212jv20",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 0000000..0a573ad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS409, DS410j";
+ compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ gpio-leds-alarm-12 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 0000000..1848a62
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology 409slim";
+ compatible = "synology,ds409slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-32-35 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-20 {
+ status = "okay";
+ };
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 0000000..a1737b4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411, DS413jv10";
+ compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ regulators-hdd-34 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 0000000..0cde914
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411j";
+ compatible = "synology,ds411j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+
+ gpio-leds-alarm-12 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 0000000..aef0cad
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology DS411slim";
+ compatible = "synology,ds411slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 0000000..93ec3d0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS212";
+ compatible = "synology,rs212", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-38 {
+ status = "okay";
+ };
+
+ regulators-hdd-30-2 {
+ status = "okay";
+ };
+};
+
+&s35390a {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 0000000..311df4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS409";
+ compatible = "synology,rs409", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-150-15-18 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&rs5c372 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 0000000..f90da85
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+ model = "Synology RS411 RS812";
+ compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "okay";
+ };
+
+ gpio-leds-hdd-36 {
+ status = "okay";
+ };
+};
+
+ð1 {
+ status = "okay";
+};
+
+&s35390a {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
new file mode 100644
index 0000000..4227c97
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -0,0 +1,871 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+
+ pcie2: pcie@2,0 {
+ status = "disabled";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pmx_alarmled_12: pmx-alarmled-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_15: pmx-fanctrl-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_16: pmx-fanctrl-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_17: pmx-fanctrl-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_18: pmx-fanalarm-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+
+ pmx_hddled_20: pmx-hddled-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_21: pmx-hddled-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_22: pmx-hddled-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_23: pmx-hddled-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_24: pmx-hddled-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_25: pmx-hddled-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_26: pmx-hddled-26 {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_27: pmx-hddled-27 {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_28: pmx-hddled-28 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_32: pmx-fanctrl-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanctrl_33: pmx-fanctrl-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpo";
+ };
+
+ pmx_fanctrl_34: pmx-fanctrl-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_35: pmx-fanalarm-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_36: pmx-hddled-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_37: pmx-hddled-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_38: pmx-hddled-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_39: pmx-hddled-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_40: pmx-hddled-40 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_41: pmx-hddled-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_42: pmx-hddled-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_43: pmx-hddled-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_44: pmx-hddled-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_hddled_45: pmx-hddled-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_44: pmx-fanalarm-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_fanalarm_45: pmx-fanalarm-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@00000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "RedBoot";
+ };
+
+ partition@00080000 {
+ reg = <0x00080000 0x00200000>;
+ label = "zImage";
+ };
+
+ partition@00280000 {
+ reg = <0x00280000 0x00140000>;
+ label = "rd.gz";
+ };
+
+ partition@003c0000 {
+ reg = <0x003c0000 0x00010000>;
+ label = "vendor";
+ };
+
+ partition@003d0000 {
+ reg = <0x003d0000 0x00020000>;
+ label = "RedBoot config";
+ };
+
+ partition@003f0000 {
+ reg = <0x003f0000 0x00010000>;
+ label = "FIS directory";
+ };
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+
+ rs5c372: rs5c372@32 {
+ status = "disabled";
+ compatible = "ricoh,rs5c372";
+ reg = <0x32>;
+ };
+
+ s35390a: s35390a@30 {
+ status = "disabled";
+ compatible = "ssi,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ };
+
+ serial@12100 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&gate_clk 7>;
+ };
+
+ sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio-fan-150-32-35 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+
+ gpio-fan-150-15-18 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_18>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+
+ gpio-fan-100-32-35 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-18 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_18>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-35-1 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_35>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-fan-100-15-35-3 {
+ status = "disabled";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+ &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+ &gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+
+ gpio-leds-alarm-12 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_alarmled_12>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:alarm";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-20 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+ &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+ &pmx_hddled_26 &pmx_hddled_27>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-21-1 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-21-2 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-36 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+ &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+ &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+ &pmx_hddled_45>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd5-green {
+ label = "synology:green:hdd5";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd5-amber {
+ label = "synology:amber:hdd5";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds-hdd-38 {
+ status = "disabled";
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+ pinctrl-names = "default";
+
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ regulators-hdd-29 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-1 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-2 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-30-4 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+ &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-31 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators-hdd-34 {
+ status = "disabled";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+ &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <9>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+ð1 {
+ status = "disabled";
+
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
new file mode 100644
index 0000000..7d1c767
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -0,0 +1,208 @@
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "HP t5325 Thin Client";
+ compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+ pinctrl-names = "default";
+
+ pmx_button_power: pmx-button_power {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ pmx_led: pmx-led {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * Redefined from kirkwood-6281.dtsi, because
+ * we don't use SPI CS on MPP0, but on MPP7.
+ */
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+ marvell,function = "spi";
+ };
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_i2s: pmx-i2s {
+ marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+ "mpp43";
+ marvell,function = "audio";
+ };
+ };
+
+ spi@10600 {
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <86000000>;
+ reg = <0>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+
+ partition@1 {
+ reg = <0x80000 0x40000>;
+ label = "SSD firmware";
+ };
+
+ partition@2 {
+ reg = <0xc0000 0x10000>;
+ label = "u-boot env";
+ };
+
+ partition@3 {
+ reg = <0xd0000 0x10000>;
+ label = "permanent u-boot env";
+ };
+
+ partition@4 {
+ reg = <0xd0000 0x10000>;
+ label = "permanent u-boot env";
+ };
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ alc5621: alc5621@1a {
+ compatible = "realtek,alc5621";
+ reg = <0x1a>;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ audio: audio-controller@a0000 {
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_sata_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB-SATA Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_power>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_power_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 85542c2..9038458 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -24,6 +24,7 @@
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
+ i2c0 = &i2c0;
};
mbus {
@@ -111,7 +112,7 @@
clocks = <&gate_clk 7>;
};
- i2c@11000 {
+ i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
@@ -145,6 +146,11 @@
reg = <0x20000 0x80>, <0x1500 0x20>;
};
+ system-controller@20000 {
+ compatible = "marvell,orion-system-controller";
+ reg = <0x20000 0x120>;
+ };
+
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
@@ -161,6 +167,11 @@
#clock-cells = <1>;
};
+ l2: l2-cache@20128 {
+ compatible = "marvell,kirkwood-cache";
+ reg = <0x20128 0x4>;
+ };
+
intc: main-interrupt-ctrl@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
@@ -300,5 +311,14 @@
#phy-cells = <0>;
status = "ok";
};
+
+ audio0: audio-controller@a0000 {
+ compatible = "marvell,kirkwood-audio";
+ reg = <0xa0000 0x2210>;
+ interrupts = <24>;
+ clocks = <&gate_clk 9>;
+ clock-names = "internal";
+ status = "disabled";
+ };
};
};