Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This is a slightly larger batch of fixes that we've been sitting on a
few -rcs. Most of them are simple oneliners, but there are two sets
that are slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx
(beaglebone SoC, among others). It's the only clock that ever has
a valid offset of 0, so a new flag needed introduction once this
problem was discovered.
- A collection of CCI fixes for performance counters discovered once
people started using it on X-Gene CPUs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
arm-cci: pmu: Fix typo in event name
Revert "ARM: tegra: fix erroneous address in dts"
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
MAINTAINERS: add tree entry for ARM/UniPhier architecture
ARM: sun5i: Fix typo in trip point temperature
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: imx6ul: populates platform device at .init_machine
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
...
diff --git a/.mailmap b/.mailmap
index 093a8ac..de22dae 100644
--- a/.mailmap
+++ b/.mailmap
@@ -88,6 +88,7 @@
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
index ffca443..15cdb7b 100644
--- a/Documentation/arm/CCN.txt
+++ b/Documentation/arm/CCN.txt
@@ -18,13 +18,17 @@
directory provides configuration templates for all documented
events, that can be used with perf tool. For example "xp_valid_flit"
is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
Masks are defined separately from the event description
(due to limited number of the config values) in the "cmp_mask"
directory, with first 8 configurable by user and additional
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fbd77d..6781a3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1624,7 +1624,7 @@
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
@@ -1831,6 +1831,7 @@
ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
S: Maintained
F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
@@ -7464,7 +7465,8 @@
F: sound/soc/codecs/max9860.*
MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/power/max14577_charger.c
@@ -7480,7 +7482,8 @@
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/*/max14577*.c
@@ -9246,7 +9249,7 @@
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <tomasz.figa@gmail.com>
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10179,7 +10182,7 @@
F: drivers/platform/x86/samsung-laptop.c
SAMSUNG AUDIO (ASoC) DRIVERS
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sangbeom Kim <sbkim73@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10194,7 +10197,8 @@
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
M: Sangbeom Kim <sbkim73@samsung.com>
-M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index c8609d8..b689172 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -226,7 +226,7 @@
#address-cells = <1>;
#size-cells = <1>;
- elm_id = <&elm>;
+ ti,elm-id = <&elm>;
};
};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index df63484..e7d9ca1 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -161,7 +161,7 @@
#address-cells = <1>;
#size-cells = <1>;
- elm_id = <&elm>;
+ ti,elm-id = <&elm>;
/* MTD partition table */
partition@0 {
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 86f7731..1263c9d 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -197,7 +197,7 @@
gpmc,wr-access-ns = <30>;
gpmc,wr-data-mux-bus-ns = <0>;
- elm_id = <&elm>;
+ ti,elm-id = <&elm>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 2e0556a..d3e6bd8 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -390,12 +390,12 @@
port@0 {
reg = <0>;
- label = "lan1";
+ label = "lan5";
};
port@1 {
reg = <1>;
- label = "lan2";
+ label = "lan4";
};
port@2 {
@@ -405,12 +405,12 @@
port@3 {
reg = <3>;
- label = "lan4";
+ label = "lan2";
};
port@4 {
reg = <4>;
- label = "lan5";
+ label = "lan1";
};
port@5 {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d949931..f6d1352 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -447,14 +447,11 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 2>;
- samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
- mmc-hs400-1_8v;
vmmc-supply = <&ldo20_reg>;
vqmmc-supply = <&ldo11_reg>;
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b620ac8..b13b0b2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -243,7 +243,7 @@
clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
- <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+ <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 96ea936..240a286 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -64,7 +64,7 @@
cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
- enable-sdio-wakup;
+ wakeup-source;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 95ee268..2f33c46 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -131,7 +131,7 @@
ti,y-min = /bits/ 16 <0>;
ti,y-max = /bits/ 16 <0>;
ti,pressure-max = /bits/ 16 <0>;
- ti,x-plat-ohms = /bits/ 16 <400>;
+ ti,x-plate-ohms = /bits/ 16 <400>;
wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index ef84d86..5bf6289 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -113,7 +113,7 @@
partition@e0000 {
label = "u-boot environment";
- reg = <0xe0000 0x100000>;
+ reg = <0xe0000 0x20000>;
};
partition@100000 {
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index e4ecab1..7175511 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -116,6 +116,10 @@
};
};
+&pciec {
+ status = "okay";
+};
+
&pcie0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 365f39ff..0ff1c2d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -35,10 +35,15 @@
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- linux,mtd-name = "micron,mt29f4g16abbda3w";
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,device-width = <2>;
-
- gpmc,page-burst-access-ns = <5>;
- gpmc,cycle2cycle-delay-ns = <50>;
-
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 5e9a13c..1c2c746 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -46,6 +46,7 @@
linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index de256fa..3e946ca 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -223,7 +223,9 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>;
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0 */
+ <4 0 0x2b000000 0x1000000>, /* CS4 */
+ <5 0 0x2c000000 0x1000000>; /* CS5 */
nand@0,0 {
compatible = "ti,omap2-nand";
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 7df2792..4f4c6ef 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -55,8 +55,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
- ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
-
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9e24b6a..1b304e2 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
- ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
-
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index 334109e..82e98ee 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -15,9 +15,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
- ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
- <5 0 0x2c000000 0x1000000>; /* CS5 */
-
smsc1: ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index e012890..a17ba02 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -84,7 +84,7 @@
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
- temperature = <850000>;
+ temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1dfc492..1444fbd 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -897,7 +897,7 @@
palmas: tps65913@58 {
compatible = "ti,palmas";
reg = <0x58>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 70cf409..966a7fc 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -802,7 +802,7 @@
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 17dd145..a161fa1 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -63,7 +63,7 @@
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 6403e0d..e52b824 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1382,7 +1382,7 @@
* Pin 41: BR_UART1_TXD
* Pin 44: BR_UART1_RXD
*/
- serial@0,70006000 {
+ serial@70006000 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
@@ -1394,7 +1394,7 @@
* Pin 71: UART2_CTS_L
* Pin 74: UART2_RTS_L
*/
- serial@0,70006040 {
+ serial@70006040 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 5d9bfab..6bb7d9c 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -64,6 +64,7 @@
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
+ of_platform_default_populate(NULL, NULL, parent);
imx6ul_enet_init();
imx_anatop_init();
imx6ul_pm_init();
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 58924b3..fe708e2 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -295,7 +295,7 @@
val &= ~BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
- if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- if (cpu_is_imx6sl())
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index c073fb5..6f2d0ae 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -220,9 +220,6 @@
{
int i = 0;
- if (!clkctrl_offs)
- return 0;
-
omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
@@ -246,9 +243,6 @@
{
int i = 0;
- if (!clkctrl_offs)
- return 0;
-
omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 2c0e07e..2ab27ad 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -278,9 +278,6 @@
{
int i = 0;
- if (!clkctrl_offs)
- return 0;
-
omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
@@ -304,9 +301,6 @@
{
int i = 0;
- if (!clkctrl_offs)
- return 0;
-
omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_DISABLE_TIME, i);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5b70938..1052b29 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1053,6 +1053,10 @@
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
+ if (!oh->prcm.omap4.clkctrl_offs &&
+ !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+ return 0;
+
return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@
if (!_find_mpu_rt_port(oh))
return 0;
+ if (!oh->prcm.omap4.clkctrl_offs &&
+ !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+ return 0;
+
/* XXX check module SIDLEMODE, hardreset status */
return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 4041bad..7890401 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -443,8 +443,12 @@
* HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
* module-level context loss register associated with them; this
* flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ * offset of zero; this flag bit should be set in those cases to
+ * distinguish from hwmods that have no clkctrl offset.
*/
#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 55c5878..e2d84aa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -29,6 +29,7 @@
#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
/*
* 'l3' class
@@ -1296,6 +1297,7 @@
CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+ PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index d72ee61..1cc4a6f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -722,8 +722,20 @@
* display serial interface controller
*/
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
.name = "dsi",
+ .sysc = &omap3xxx_dsi_sysc,
};
static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 5755907f..ffa7c9d 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -551,7 +551,7 @@
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
- CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
+ CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_stall_tt_full, 0xE),
CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
NULL
};
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 97a9185..884c030 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -187,6 +187,7 @@
struct arm_ccn_component *xp;
struct arm_ccn_dt dt;
+ int mn_id;
};
static DEFINE_MUTEX(arm_ccn_mutex);
@@ -212,6 +213,7 @@
#define CCN_CONFIG_TYPE(_config) (((_config) >> 8) & 0xff)
#define CCN_CONFIG_EVENT(_config) (((_config) >> 16) & 0xff)
#define CCN_CONFIG_PORT(_config) (((_config) >> 24) & 0x3)
+#define CCN_CONFIG_BUS(_config) (((_config) >> 24) & 0x3)
#define CCN_CONFIG_VC(_config) (((_config) >> 26) & 0x7)
#define CCN_CONFIG_DIR(_config) (((_config) >> 29) & 0x1)
#define CCN_CONFIG_MASK(_config) (((_config) >> 30) & 0xf)
@@ -241,6 +243,7 @@
static CCN_FORMAT_ATTR(type, "config:8-15");
static CCN_FORMAT_ATTR(event, "config:16-23");
static CCN_FORMAT_ATTR(port, "config:24-25");
+static CCN_FORMAT_ATTR(bus, "config:24-25");
static CCN_FORMAT_ATTR(vc, "config:26-28");
static CCN_FORMAT_ATTR(dir, "config:29-29");
static CCN_FORMAT_ATTR(mask, "config:30-33");
@@ -253,6 +256,7 @@
&arm_ccn_pmu_format_attr_type.attr.attr,
&arm_ccn_pmu_format_attr_event.attr.attr,
&arm_ccn_pmu_format_attr_port.attr.attr,
+ &arm_ccn_pmu_format_attr_bus.attr.attr,
&arm_ccn_pmu_format_attr_vc.attr.attr,
&arm_ccn_pmu_format_attr_dir.attr.attr,
&arm_ccn_pmu_format_attr_mask.attr.attr,
@@ -328,6 +332,7 @@
static ssize_t arm_ccn_pmu_event_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
struct arm_ccn_pmu_event *event = container_of(attr,
struct arm_ccn_pmu_event, attr);
ssize_t res;
@@ -349,10 +354,17 @@
break;
case CCN_TYPE_XP:
res += snprintf(buf + res, PAGE_SIZE - res,
- ",xp=?,port=?,vc=?,dir=?");
+ ",xp=?,vc=?");
if (event->event == CCN_EVENT_WATCHPOINT)
res += snprintf(buf + res, PAGE_SIZE - res,
- ",cmp_l=?,cmp_h=?,mask=?");
+ ",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?");
+ else
+ res += snprintf(buf + res, PAGE_SIZE - res,
+ ",bus=?");
+
+ break;
+ case CCN_TYPE_MN:
+ res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
break;
default:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
@@ -383,9 +395,9 @@
}
static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
- CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
- CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
- CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
+ CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
+ CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
+ CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
@@ -733,9 +745,10 @@
if (has_branch_stack(event) || event->attr.exclude_user ||
event->attr.exclude_kernel || event->attr.exclude_hv ||
- event->attr.exclude_idle) {
+ event->attr.exclude_idle || event->attr.exclude_host ||
+ event->attr.exclude_guest) {
dev_warn(ccn->dev, "Can't exclude execution levels!\n");
- return -EOPNOTSUPP;
+ return -EINVAL;
}
if (event->cpu < 0) {
@@ -759,6 +772,12 @@
/* Validate node/xp vs topology */
switch (type) {
+ case CCN_TYPE_MN:
+ if (node_xp != ccn->mn_id) {
+ dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
+ return -EINVAL;
+ }
+ break;
case CCN_TYPE_XP:
if (node_xp >= ccn->num_xps) {
dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
@@ -886,6 +905,10 @@
struct arm_ccn_component *xp;
u32 val, dt_cfg;
+ /* Nothing to do for cycle counter */
+ if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER)
+ return;
+
if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP)
xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)];
else
@@ -917,38 +940,17 @@
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
- /*
- * Pin the timer, so that the overflows are handled by the chosen
- * event->cpu (this is the same one as presented in "cpumask"
- * attribute).
- */
- if (!ccn->irq)
- hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
- HRTIMER_MODE_REL_PINNED);
-
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
}
static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
{
- struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
- u64 timeout;
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
- if (!ccn->irq)
- hrtimer_cancel(&ccn->dt.hrtimer);
-
- /* Let the DT bus drain */
- timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) +
- ccn->num_xps;
- while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) <
- timeout)
- cpu_relax();
-
if (flags & PERF_EF_UPDATE)
arm_ccn_pmu_event_update(event);
@@ -988,7 +990,7 @@
/* Comparison values */
writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp));
- writel((cmp_l >> 32) & 0xefffffff,
+ writel((cmp_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4);
writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp));
writel((cmp_h >> 32) & 0x0fffffff,
@@ -996,7 +998,7 @@
/* Mask */
writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp));
- writel((mask_l >> 32) & 0xefffffff,
+ writel((mask_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4);
writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp));
writel((mask_h >> 32) & 0x0fffffff,
@@ -1014,7 +1016,7 @@
hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base);
id = (CCN_CONFIG_VC(event->attr.config) << 4) |
- (CCN_CONFIG_PORT(event->attr.config) << 3) |
+ (CCN_CONFIG_BUS(event->attr.config) << 3) |
(CCN_CONFIG_EVENT(event->attr.config) << 0);
val = readl(source->base + CCN_XP_PMU_EVENT_SEL);
@@ -1099,15 +1101,31 @@
spin_unlock(&ccn->dt.config_lock);
}
+static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn)
+{
+ return bitmap_weight(ccn->dt.pmu_counters_mask,
+ CCN_NUM_PMU_EVENT_COUNTERS + 1);
+}
+
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
int err;
struct hw_perf_event *hw = &event->hw;
+ struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
err = arm_ccn_pmu_event_alloc(event);
if (err)
return err;
+ /*
+ * Pin the timer, so that the overflows are handled by the chosen
+ * event->cpu (this is the same one as presented in "cpumask"
+ * attribute).
+ */
+ if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1)
+ hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
+ HRTIMER_MODE_REL_PINNED);
+
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
@@ -1120,9 +1138,14 @@
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
arm_ccn_pmu_event_release(event);
+
+ if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0)
+ hrtimer_cancel(&ccn->dt.hrtimer);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
@@ -1130,6 +1153,24 @@
arm_ccn_pmu_event_update(event);
}
+static void arm_ccn_pmu_enable(struct pmu *pmu)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+ u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+ val |= CCN_DT_PMCR__PMU_EN;
+ writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
+static void arm_ccn_pmu_disable(struct pmu *pmu)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
+
+ u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
+ val &= ~CCN_DT_PMCR__PMU_EN;
+ writel(val, ccn->dt.base + CCN_DT_PMCR);
+}
+
static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt)
{
u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR);
@@ -1252,6 +1293,8 @@
.start = arm_ccn_pmu_event_start,
.stop = arm_ccn_pmu_event_stop,
.read = arm_ccn_pmu_event_read,
+ .pmu_enable = arm_ccn_pmu_enable,
+ .pmu_disable = arm_ccn_pmu_disable,
};
/* No overflow interrupt? Have to use a timer instead. */
@@ -1361,6 +1404,8 @@
switch (type) {
case CCN_TYPE_MN:
+ ccn->mn_id = id;
+ return 0;
case CCN_TYPE_DT:
return 0;
case CCN_TYPE_XP:
@@ -1471,8 +1516,9 @@
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
- err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
- dev_name(ccn->dev), ccn);
+ err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
+ IRQF_NOBALANCING | IRQF_NO_THREAD,
+ dev_name(ccn->dev), ccn);
if (err)
return err;
diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
index c3cb76b..9efdf1d 100644
--- a/drivers/bus/vexpress-config.c
+++ b/drivers/bus/vexpress-config.c
@@ -178,6 +178,7 @@
parent = class_find_device(vexpress_config_class, NULL, bridge,
vexpress_config_node_match);
+ of_node_put(bridge);
if (WARN_ON(!parent))
return -ENODEV;
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 4388937..ce2bc2a 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -709,9 +709,10 @@
struct mbox_client *cl = &pchan->cl;
struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
- if (of_address_to_resource(shmem, 0, &res)) {
+ ret = of_address_to_resource(shmem, 0, &res);
+ of_node_put(shmem);
+ if (ret) {
dev_err(dev, "failed to get SCPI payload mem resource\n");
- ret = -EINVAL;
goto err;
}
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 869c83f..f00f3e7 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -2185,7 +2185,7 @@
return 0;
}
-static int gpmc_probe_dt_children(struct platform_device *pdev)
+static void gpmc_probe_dt_children(struct platform_device *pdev)
{
int ret;
struct device_node *child;
@@ -2200,11 +2200,11 @@
else
ret = gpmc_probe_generic_child(pdev, child);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n",
+ child->name, ret);
+ }
}
-
- return 0;
}
#else
static int gpmc_probe_dt(struct platform_device *pdev)
@@ -2212,9 +2212,8 @@
return 0;
}
-static int gpmc_probe_dt_children(struct platform_device *pdev)
+static void gpmc_probe_dt_children(struct platform_device *pdev)
{
- return 0;
}
#endif /* CONFIG_OF */
@@ -2369,16 +2368,10 @@
goto setup_irq_failed;
}
- rc = gpmc_probe_dt_children(pdev);
- if (rc < 0) {
- dev_err(gpmc->dev, "failed to probe DT children\n");
- goto dt_children_failed;
- }
+ gpmc_probe_dt_children(pdev);
return 0;
-dt_children_failed:
- gpmc_free_irq(gpmc);
setup_irq_failed:
gpmc_gpio_exit(gpmc);
gpio_init_failed: