arch/ppc/platforms/4xx/ibmnp405h.h - kernel/msm-4.19 - Gitiles

 /*
  * Author: Armin Kuster <akuster@mvista.com>
  *
  * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */

 #ifdef __KERNEL__
 #ifndef __ASM_IBMNP405H_H__
 #define __ASM_IBMNP405H_H__

 #include <linux/config.h>

 /* ibm405.h at bottom of this file */

 #define PPC405_PCI_CONFIG_ADDR	0xeec00000
 #define PPC405_PCI_CONFIG_DATA	0xeec00004
 #define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
 						/* setbat */
 #define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
 #define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
 #define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */

 #define PPC405_PCI_LOWER_MEM	0x00000000	/* hose_a->mem_space.start */
 #define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
 #define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
 #define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */

 #define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE

 #define PPC4xx_PCI_IO_ADDR	((uint)PPC405_PCI_PHY_IO_BASE)
 #define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
 #define PPC4xx_PCI_CFG_ADDR	((uint)PPC405_PCI_CONFIG_ADDR)
 #define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
 #define PPC4xx_PCI_LCFG_ADDR	((uint)0xef400000)
 #define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
 #define PPC4xx_ONB_IO_ADDR	((uint)0xef600000)
 #define PPC4xx_ONB_IO_SIZE	((uint)4*1024)

 /* serial port defines */
 #define RS_TABLE_SIZE	4

 #define UART0_INT	0
 #define UART1_INT	1
 #define PCIL0_BASE	0xEF400000
 #define UART0_IO_BASE	0xEF600300
 #define UART1_IO_BASE	0xEF600400
 #define OPB0_BASE	0xEF600600
 #define EMAC0_BASE	0xEF600800

 #define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]

 #define STD_UART_OP(num)					\
 	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
 		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
 		iomem_base:(u8 *) UART##num##_IO_BASE,		\
 		io_type: SERIAL_IO_MEM},

 #if defined(CONFIG_UART0_TTYS0)
 #define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
 #define SERIAL_PORT_DFNS        \
         STD_UART_OP(0)          \
         STD_UART_OP(1)
 #endif

 #if defined(CONFIG_UART0_TTYS1)
 #define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
 #define SERIAL_PORT_DFNS        \
         STD_UART_OP(1)          \
         STD_UART_OP(0)
 #endif

 /* DCR defines */
 /* ------------------------------------------------------------------------- */

 #define DCRN_CHCR_BASE	0x0F1
 #define DCRN_CHPSR_BASE	0x0B4
 #define DCRN_CPMSR_BASE	0x0BA
 #define DCRN_CPMFR_BASE	0x0B9
 #define DCRN_CPMER_BASE	0x0B8

 /* CPM Clocking & Power Mangement defines */
 #define IBM_CPM_PCI		0x40000000	/* PCI */
 #define IBM_CPM_EMAC2	0x20000000	/* EMAC 2 MII */
 #define IBM_CPM_EMAC3	0x04000000	/* EMAC 3 MII */
 #define IBM_CPM_EMAC0	0x00800000	/* EMAC 0 MII */
 #define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
 #define IBM_CPM_EMMII	0	/* Shift value for MII */
 #define IBM_CPM_EMRX	1	/* Shift value for recv */
 #define IBM_CPM_EMTX	2	/* Shift value for MAC */
 #define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
 #define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
 #define IBM_CPM_CPU	0x00008000	/* processor core */
 #define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
 #define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
 #define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
 #define IBM_CPM_HDLC	0x00000800	/* HDCL */
 #define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
 #define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
 #define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
 #define IBM_CPM_DMA	0x00000040	/* DMA controller */
 #define IBM_CPM_IIC0	0x00000010	/* IIC interface */
 #define IBM_CPM_UART0	0x00000002	/* serial port 0 */
 #define IBM_CPM_UART1	0x00000001	/* serial port 1 */
 /* this is the default setting for devices put to sleep when booting */

 #define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU 	\
 			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB 	\
 			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
 			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2	\
 			| IBM_CPM_EMAC3 | IBM_CPM_PCI)

 #define DCRN_DMA0_BASE	0x100
 #define DCRN_DMA1_BASE	0x108
 #define DCRN_DMA2_BASE	0x110
 #define DCRN_DMA3_BASE	0x118
 #define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
 #define DCRN_DMASR_BASE	0x120
 #define DCRN_EBC_BASE	0x012
 #define DCRN_DCP0_BASE	0x014
 #define DCRN_MAL_BASE	0x180
 #define DCRN_OCM0_BASE	0x018
 #define DCRN_PLB0_BASE	0x084
 #define DCRN_PLLMR_BASE	0x0B0
 #define DCRN_POB0_BASE	0x0A0
 #define DCRN_SDRAM0_BASE 0x010
 #define DCRN_UIC0_BASE	0x0C0
 #define DCRN_UIC1_BASE	0x0D0
 #define DCRN_CPC0_EPRCSR 0x0F3

 #define UIC0_UIC1NC	0x00000002

 #define CHR1_CETE	0x00000004	/* CPU external timer enable */
 #define UIC0	DCRN_UIC0_BASE
 #define UIC1	DCRN_UIC1_BASE

 #undef NR_UICS
 #define NR_UICS	2

 /* EMAC DCRN's FIXME: armin */
 #define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
 #define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
 #define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
 #define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
 #define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
 #define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
 #define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
 #define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */

 #include <asm/ibm405.h>

 #endif				/* __ASM_IBMNP405H_H__ */
 #endif				/* __KERNEL__ */
	/*
	* Author: Armin Kuster <akuster@mvista.com>
	*
	* 2002 (c) MontaVista, Software, Inc. This file is licensed under
	* the terms of the GNU General Public License version 2. This program
	* is licensed "as is" without any warranty of any kind, whether express
	* or implied.
	*/

	#ifdef __KERNEL__
	#ifndef __ASM_IBMNP405H_H__
	#define __ASM_IBMNP405H_H__

	#include <linux/config.h>

	/* ibm405.h at bottom of this file */

	#define PPC405_PCI_CONFIG_ADDR 0xeec00000
	#define PPC405_PCI_CONFIG_DATA 0xeec00004
	#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */
	/* setbat */
	#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */
	#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */
	#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */

	#define PPC405_PCI_LOWER_MEM 0x00000000 /* hose_a->mem_space.start */
	#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */
	#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */
	#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */

	#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE

	#define PPC4xx_PCI_IO_ADDR ((uint)PPC405_PCI_PHY_IO_BASE)
	#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
	#define PPC4xx_PCI_CFG_ADDR ((uint)PPC405_PCI_CONFIG_ADDR)
	#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
	#define PPC4xx_PCI_LCFG_ADDR ((uint)0xef400000)
	#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
	#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000)
	#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)

	/* serial port defines */
	#define RS_TABLE_SIZE 4

	#define UART0_INT 0
	#define UART1_INT 1
	#define PCIL0_BASE 0xEF400000
	#define UART0_IO_BASE 0xEF600300
	#define UART1_IO_BASE 0xEF600400
	#define OPB0_BASE 0xEF600600
	#define EMAC0_BASE 0xEF600800

	#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]

	#define STD_UART_OP(num) \
	{ 0, BASE_BAUD, 0, UART##num##_INT, \
	(ASYNC_BOOT_AUTOCONF \| ASYNC_SKIP_TEST), \
	iomem_base:(u8 *) UART##num##_IO_BASE, \
	io_type: SERIAL_IO_MEM},

	#if defined(CONFIG_UART0_TTYS0)
	#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
	#define SERIAL_PORT_DFNS \
	STD_UART_OP(0) \
	STD_UART_OP(1)
	#endif

	#if defined(CONFIG_UART0_TTYS1)
	#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
	#define SERIAL_PORT_DFNS \
	STD_UART_OP(1) \
	STD_UART_OP(0)
	#endif

	/* DCR defines */
	/* ------------------------------------------------------------------------- */

	#define DCRN_CHCR_BASE 0x0F1
	#define DCRN_CHPSR_BASE 0x0B4
	#define DCRN_CPMSR_BASE 0x0BA
	#define DCRN_CPMFR_BASE 0x0B9
	#define DCRN_CPMER_BASE 0x0B8

	/* CPM Clocking & Power Mangement defines */
	#define IBM_CPM_PCI 0x40000000 /* PCI */
	#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */
	#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */
	#define IBM_CPM_EMAC0 0x00800000 /* EMAC 0 MII */
	#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */
	#define IBM_CPM_EMMII 0 /* Shift value for MII */
	#define IBM_CPM_EMRX 1 /* Shift value for recv */
	#define IBM_CPM_EMTX 2 /* Shift value for MAC */
	#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */
	#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */
	#define IBM_CPM_CPU 0x00008000 /* processor core */
	#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */
	#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */
	#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */
	#define IBM_CPM_HDLC 0x00000800 /* HDCL */
	#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
	#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
	#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
	#define IBM_CPM_DMA 0x00000040 /* DMA controller */
	#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
	#define IBM_CPM_UART0 0x00000002 /* serial port 0 */
	#define IBM_CPM_UART1 0x00000001 /* serial port 1 */
	/* this is the default setting for devices put to sleep when booting */

	#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 \| IBM_CPM_UIC1 \| IBM_CPM_CPU \
	\| IBM_CPM_EBC \| IBM_CPM_SDRAM0 \| IBM_CPM_PLB \
	\| IBM_CPM_OPB \| IBM_CPM_TMRCLK \| IBM_CPM_DMA \
	\| IBM_CPM_EMAC0 \| IBM_CPM_EMAC1 \| IBM_CPM_EMAC2 \
	\| IBM_CPM_EMAC3 \| IBM_CPM_PCI)

	#define DCRN_DMA0_BASE 0x100
	#define DCRN_DMA1_BASE 0x108
	#define DCRN_DMA2_BASE 0x110
	#define DCRN_DMA3_BASE 0x118
	#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
	#define DCRN_DMASR_BASE 0x120
	#define DCRN_EBC_BASE 0x012
	#define DCRN_DCP0_BASE 0x014
	#define DCRN_MAL_BASE 0x180
	#define DCRN_OCM0_BASE 0x018
	#define DCRN_PLB0_BASE 0x084
	#define DCRN_PLLMR_BASE 0x0B0
	#define DCRN_POB0_BASE 0x0A0
	#define DCRN_SDRAM0_BASE 0x010
	#define DCRN_UIC0_BASE 0x0C0
	#define DCRN_UIC1_BASE 0x0D0
	#define DCRN_CPC0_EPRCSR 0x0F3

	#define UIC0_UIC1NC 0x00000002

	#define CHR1_CETE 0x00000004 /* CPU external timer enable */
	#define UIC0 DCRN_UIC0_BASE
	#define UIC1 DCRN_UIC1_BASE

	#undef NR_UICS
	#define NR_UICS 2

	/* EMAC DCRN's FIXME: armin */
	#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
	#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
	#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
	#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
	#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
	#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
	#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
	#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */

	#include <asm/ibm405.h>

	#endif /* __ASM_IBMNP405H_H__ */
	#endif /* __KERNEL__ */