clk: samsung: add plls used by the early s3c24xx cpus
The manuals do not give them explicit names like in later socs, so more
generic names with a s3c2410-prefix were used for them.
As it was common to do so in the previous implementation, functionality
to change the pll rate is already included.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 8c9c015..7fb0a28 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -11,6 +11,7 @@
#include <linux/errno.h>
#include <linux/hrtimer.h>
+#include <linux/delay.h>
#include "clk.h"
#include "clk-pll.h"
@@ -701,6 +702,169 @@
};
/*
+ * PLL Clock Type of S3C24XX before S3C2443
+ */
+
+#define PLLS3C2410_MDIV_MASK (0xff)
+#define PLLS3C2410_PDIV_MASK (0x1f)
+#define PLLS3C2410_SDIV_MASK (0x3)
+#define PLLS3C2410_MDIV_SHIFT (12)
+#define PLLS3C2410_PDIV_SHIFT (4)
+#define PLLS3C2410_SDIV_SHIFT (0)
+
+#define PLLS3C2410_ENABLE_REG_OFFSET 0x10
+
+static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+ pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+ sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+ fvco *= (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+ pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+ sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+ fvco *= (2 * (mdiv + 8));
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 tmp;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ tmp = __raw_readl(pll->con_reg);
+
+ /* Change PLL PMS values */
+ tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
+ (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
+ (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
+ tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
+ (rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
+ (rate->sdiv << PLLS3C2410_SDIV_SHIFT);
+ __raw_writel(tmp, pll->con_reg);
+
+ /* Time to settle according to the manual */
+ udelay(300);
+
+ return 0;
+}
+
+static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+ u32 pll_en_orig = pll_en;
+
+ if (enable)
+ pll_en &= ~BIT(bit);
+ else
+ pll_en |= BIT(bit);
+
+ __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+
+ /* if we started the UPLL, then allow to settle */
+ if (enable && (pll_en_orig & BIT(bit)))
+ udelay(300);
+
+ return 0;
+}
+
+static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
+{
+ return samsung_s3c2410_pll_enable(hw, 5, true);
+}
+
+static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
+{
+ samsung_s3c2410_pll_enable(hw, 5, false);
+}
+
+static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
+{
+ return samsung_s3c2410_pll_enable(hw, 7, true);
+}
+
+static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
+{
+ samsung_s3c2410_pll_enable(hw, 7, false);
+}
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_upll_enable,
+ .disable = samsung_s3c2410_upll_disable,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_upll_enable,
+ .disable = samsung_s3c2410_upll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
+ .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+/*
* PLL2550x Clock Type
*/
@@ -866,6 +1030,24 @@
else
init.ops = &samsung_pll46xx_clk_ops;
break;
+ case pll_s3c2410_mpll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2410_mpll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2410_mpll_clk_ops;
+ break;
+ case pll_s3c2410_upll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2410_upll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2410_upll_clk_ops;
+ break;
+ case pll_s3c2440_mpll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2440_mpll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2440_mpll_clk_ops;
+ break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, pll_clk->name);