| /* |
| * ip22-int.c: Routines for generic manipulation of the INT[23] ASIC |
| * found on INDY and Indigo2 workstations. |
| * |
| * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) |
| * Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org) |
| * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) |
| * - Indigo2 changes |
| * - Interrupt handling fixes |
| * Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org) |
| */ |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/addrspace.h> |
| #include <asm/irq_cpu.h> |
| |
| #include <asm/sgi/ioc.h> |
| #include <asm/sgi/hpc3.h> |
| #include <asm/sgi/ip22.h> |
| |
| /* #define DEBUG_SGINT */ |
| |
| /* So far nothing hangs here */ |
| #undef USE_LIO3_IRQ |
| |
| struct sgint_regs *sgint; |
| |
| static char lc0msk_to_irqnr[256]; |
| static char lc1msk_to_irqnr[256]; |
| static char lc2msk_to_irqnr[256]; |
| static char lc3msk_to_irqnr[256]; |
| |
| extern int ip22_eisa_init(void); |
| |
| static void enable_local0_irq(unsigned int irq) |
| { |
| /* don't allow mappable interrupt to be enabled from setup_irq, |
| * we have our own way to do so */ |
| if (irq != SGI_MAP_0_IRQ) |
| sgint->imask0 |= (1 << (irq - SGINT_LOCAL0)); |
| } |
| |
| static void disable_local0_irq(unsigned int irq) |
| { |
| sgint->imask0 &= ~(1 << (irq - SGINT_LOCAL0)); |
| } |
| |
| static struct irq_chip ip22_local0_irq_type = { |
| .typename = "IP22 local 0", |
| .ack = disable_local0_irq, |
| .mask = disable_local0_irq, |
| .mask_ack = disable_local0_irq, |
| .unmask = enable_local0_irq, |
| }; |
| |
| static void enable_local1_irq(unsigned int irq) |
| { |
| /* don't allow mappable interrupt to be enabled from setup_irq, |
| * we have our own way to do so */ |
| if (irq != SGI_MAP_1_IRQ) |
| sgint->imask1 |= (1 << (irq - SGINT_LOCAL1)); |
| } |
| |
| void disable_local1_irq(unsigned int irq) |
| { |
| sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1)); |
| } |
| |
| static struct irq_chip ip22_local1_irq_type = { |
| .typename = "IP22 local 1", |
| .ack = disable_local1_irq, |
| .mask = disable_local1_irq, |
| .mask_ack = disable_local1_irq, |
| .unmask = enable_local1_irq, |
| }; |
| |
| static void enable_local2_irq(unsigned int irq) |
| { |
| sgint->imask0 |= (1 << (SGI_MAP_0_IRQ - SGINT_LOCAL0)); |
| sgint->cmeimask0 |= (1 << (irq - SGINT_LOCAL2)); |
| } |
| |
| void disable_local2_irq(unsigned int irq) |
| { |
| sgint->cmeimask0 &= ~(1 << (irq - SGINT_LOCAL2)); |
| if (!sgint->cmeimask0) |
| sgint->imask0 &= ~(1 << (SGI_MAP_0_IRQ - SGINT_LOCAL0)); |
| } |
| |
| static struct irq_chip ip22_local2_irq_type = { |
| .typename = "IP22 local 2", |
| .ack = disable_local2_irq, |
| .mask = disable_local2_irq, |
| .mask_ack = disable_local2_irq, |
| .unmask = enable_local2_irq, |
| }; |
| |
| static void enable_local3_irq(unsigned int irq) |
| { |
| sgint->imask1 |= (1 << (SGI_MAP_1_IRQ - SGINT_LOCAL1)); |
| sgint->cmeimask1 |= (1 << (irq - SGINT_LOCAL3)); |
| } |
| |
| void disable_local3_irq(unsigned int irq) |
| { |
| sgint->cmeimask1 &= ~(1 << (irq - SGINT_LOCAL3)); |
| if (!sgint->cmeimask1) |
| sgint->imask1 &= ~(1 << (SGI_MAP_1_IRQ - SGINT_LOCAL1)); |
| } |
| |
| static struct irq_chip ip22_local3_irq_type = { |
| .typename = "IP22 local 3", |
| .ack = disable_local3_irq, |
| .mask = disable_local3_irq, |
| .mask_ack = disable_local3_irq, |
| .unmask = enable_local3_irq, |
| }; |
| |
| static void indy_local0_irqdispatch(void) |
| { |
| u8 mask = sgint->istat0 & sgint->imask0; |
| u8 mask2; |
| int irq; |
| |
| if (mask & SGINT_ISTAT0_LIO2) { |
| mask2 = sgint->vmeistat & sgint->cmeimask0; |
| irq = lc2msk_to_irqnr[mask2]; |
| } else |
| irq = lc0msk_to_irqnr[mask]; |
| |
| /* if irq == 0, then the interrupt has already been cleared */ |
| if (irq) |
| do_IRQ(irq); |
| } |
| |
| static void indy_local1_irqdispatch(void) |
| { |
| u8 mask = sgint->istat1 & sgint->imask1; |
| u8 mask2; |
| int irq; |
| |
| if (mask & SGINT_ISTAT1_LIO3) { |
| mask2 = sgint->vmeistat & sgint->cmeimask1; |
| irq = lc3msk_to_irqnr[mask2]; |
| } else |
| irq = lc1msk_to_irqnr[mask]; |
| |
| /* if irq == 0, then the interrupt has already been cleared */ |
| if (irq) |
| do_IRQ(irq); |
| } |
| |
| extern void ip22_be_interrupt(int irq); |
| |
| static void indy_buserror_irq(void) |
| { |
| int irq = SGI_BUSERR_IRQ; |
| |
| irq_enter(); |
| kstat_this_cpu.irqs[irq]++; |
| ip22_be_interrupt(irq); |
| irq_exit(); |
| } |
| |
| static struct irqaction local0_cascade = { |
| .handler = no_action, |
| .flags = IRQF_DISABLED, |
| .name = "local0 cascade", |
| }; |
| |
| static struct irqaction local1_cascade = { |
| .handler = no_action, |
| .flags = IRQF_DISABLED, |
| .name = "local1 cascade", |
| }; |
| |
| static struct irqaction buserr = { |
| .handler = no_action, |
| .flags = IRQF_DISABLED, |
| .name = "Bus Error", |
| }; |
| |
| static struct irqaction map0_cascade = { |
| .handler = no_action, |
| .flags = IRQF_DISABLED, |
| .name = "mapable0 cascade", |
| }; |
| |
| #ifdef USE_LIO3_IRQ |
| static struct irqaction map1_cascade = { |
| .handler = no_action, |
| .flags = IRQF_DISABLED, |
| .name = "mapable1 cascade", |
| }; |
| #define SGI_INTERRUPTS SGINT_END |
| #else |
| #define SGI_INTERRUPTS SGINT_LOCAL3 |
| #endif |
| |
| extern void indy_r4k_timer_interrupt(void); |
| extern void indy_8254timer_irq(void); |
| |
| /* |
| * IRQs on the INDY look basically (barring software IRQs which we don't use |
| * at all) like: |
| * |
| * MIPS IRQ Source |
| * -------- ------ |
| * 0 Software (ignored) |
| * 1 Software (ignored) |
| * 2 Local IRQ level zero |
| * 3 Local IRQ level one |
| * 4 8254 Timer zero |
| * 5 8254 Timer one |
| * 6 Bus Error |
| * 7 R4k timer (what we use) |
| * |
| * We handle the IRQ according to _our_ priority which is: |
| * |
| * Highest ---- R4k Timer |
| * Local IRQ zero |
| * Local IRQ one |
| * Bus Error |
| * 8254 Timer zero |
| * Lowest ---- 8254 Timer one |
| * |
| * then we just return, if multiple IRQs are pending then we will just take |
| * another exception, big deal. |
| */ |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending = read_c0_cause(); |
| |
| /* |
| * First we check for r4k counter/timer IRQ. |
| */ |
| if (pending & CAUSEF_IP7) |
| indy_r4k_timer_interrupt(); |
| else if (pending & CAUSEF_IP2) |
| indy_local0_irqdispatch(); |
| else if (pending & CAUSEF_IP3) |
| indy_local1_irqdispatch(); |
| else if (pending & CAUSEF_IP6) |
| indy_buserror_irq(); |
| else if (pending & (CAUSEF_IP4 | CAUSEF_IP5)) |
| indy_8254timer_irq(); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| int i; |
| |
| /* Init local mask --> irq tables. */ |
| for (i = 0; i < 256; i++) { |
| if (i & 0x80) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 7; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 7; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 7; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 7; |
| } else if (i & 0x40) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 6; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 6; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 6; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 6; |
| } else if (i & 0x20) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 5; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 5; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 5; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 5; |
| } else if (i & 0x10) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 4; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 4; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 4; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 4; |
| } else if (i & 0x08) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 3; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 3; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 3; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 3; |
| } else if (i & 0x04) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 2; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 2; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 2; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 2; |
| } else if (i & 0x02) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 1; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 1; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 1; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 1; |
| } else if (i & 0x01) { |
| lc0msk_to_irqnr[i] = SGINT_LOCAL0 + 0; |
| lc1msk_to_irqnr[i] = SGINT_LOCAL1 + 0; |
| lc2msk_to_irqnr[i] = SGINT_LOCAL2 + 0; |
| lc3msk_to_irqnr[i] = SGINT_LOCAL3 + 0; |
| } else { |
| lc0msk_to_irqnr[i] = 0; |
| lc1msk_to_irqnr[i] = 0; |
| lc2msk_to_irqnr[i] = 0; |
| lc3msk_to_irqnr[i] = 0; |
| } |
| } |
| |
| /* Mask out all interrupts. */ |
| sgint->imask0 = 0; |
| sgint->imask1 = 0; |
| sgint->cmeimask0 = 0; |
| sgint->cmeimask1 = 0; |
| |
| /* init CPU irqs */ |
| mips_cpu_irq_init(); |
| |
| for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) { |
| struct irq_chip *handler; |
| |
| if (i < SGINT_LOCAL1) |
| handler = &ip22_local0_irq_type; |
| else if (i < SGINT_LOCAL2) |
| handler = &ip22_local1_irq_type; |
| else if (i < SGINT_LOCAL3) |
| handler = &ip22_local2_irq_type; |
| else |
| handler = &ip22_local3_irq_type; |
| |
| set_irq_chip_and_handler(i, handler, handle_level_irq); |
| } |
| |
| /* vector handler. this register the IRQ as non-sharable */ |
| setup_irq(SGI_LOCAL_0_IRQ, &local0_cascade); |
| setup_irq(SGI_LOCAL_1_IRQ, &local1_cascade); |
| setup_irq(SGI_BUSERR_IRQ, &buserr); |
| |
| /* cascade in cascade. i love Indy ;-) */ |
| setup_irq(SGI_MAP_0_IRQ, &map0_cascade); |
| #ifdef USE_LIO3_IRQ |
| setup_irq(SGI_MAP_1_IRQ, &map1_cascade); |
| #endif |
| |
| #ifdef CONFIG_EISA |
| if (ip22_is_fullhouse()) /* Only Indigo-2 has EISA stuff */ |
| ip22_eisa_init (); |
| #endif |
| } |