| /* |
| * V4L2 flash LED sub-device registration helpers. |
| * |
| * Copyright (C) 2015 Samsung Electronics Co., Ltd |
| * Author: Jacek Anaszewski <j.anaszewski@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/led-class-flash.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <media/v4l2-flash-led-class.h> |
| |
| #define has_flash_op(v4l2_flash, op) \ |
| (v4l2_flash && v4l2_flash->ops->op) |
| |
| #define call_flash_op(v4l2_flash, op, arg) \ |
| (has_flash_op(v4l2_flash, op) ? \ |
| v4l2_flash->ops->op(v4l2_flash, arg) : \ |
| -EINVAL) |
| |
| enum ctrl_init_data_id { |
| LED_MODE, |
| TORCH_INTENSITY, |
| FLASH_INTENSITY, |
| INDICATOR_INTENSITY, |
| FLASH_TIMEOUT, |
| STROBE_SOURCE, |
| /* |
| * Only above values are applicable to |
| * the 'ctrls' array in the struct v4l2_flash. |
| */ |
| FLASH_STROBE, |
| STROBE_STOP, |
| STROBE_STATUS, |
| FLASH_FAULT, |
| NUM_FLASH_CTRLS, |
| }; |
| |
| static enum led_brightness __intensity_to_led_brightness( |
| struct v4l2_ctrl *ctrl, s32 intensity) |
| { |
| intensity -= ctrl->minimum; |
| intensity /= (u32) ctrl->step; |
| |
| /* |
| * Indicator LEDs, unlike torch LEDs, are turned on/off basing on |
| * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only. |
| * Therefore it must be possible to set it to 0 level which in |
| * the LED subsystem reflects LED_OFF state. |
| */ |
| if (ctrl->minimum) |
| ++intensity; |
| |
| return intensity; |
| } |
| |
| static s32 __led_brightness_to_intensity(struct v4l2_ctrl *ctrl, |
| enum led_brightness brightness) |
| { |
| /* |
| * Indicator LEDs, unlike torch LEDs, are turned on/off basing on |
| * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only. |
| * Do not decrement brightness read from the LED subsystem for |
| * indicator LED as it may equal 0. For torch LEDs this function |
| * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the |
| * brightness read is guaranteed to be greater than 0. In the mode |
| * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used. |
| */ |
| if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY) |
| --brightness; |
| |
| return (brightness * ctrl->step) + ctrl->minimum; |
| } |
| |
| static void v4l2_flash_set_led_brightness(struct v4l2_flash *v4l2_flash, |
| struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| enum led_brightness brightness; |
| |
| if (has_flash_op(v4l2_flash, intensity_to_led_brightness)) |
| brightness = call_flash_op(v4l2_flash, |
| intensity_to_led_brightness, |
| ctrl->val); |
| else |
| brightness = __intensity_to_led_brightness(ctrl, ctrl->val); |
| /* |
| * In case a LED Flash class driver provides ops for custom |
| * brightness <-> intensity conversion, it also must have defined |
| * related v4l2 control step == 1. In such a case a backward conversion |
| * from led brightness to v4l2 intensity is required to find out the |
| * the aligned intensity value. |
| */ |
| if (has_flash_op(v4l2_flash, led_brightness_to_intensity)) |
| ctrl->val = call_flash_op(v4l2_flash, |
| led_brightness_to_intensity, |
| brightness); |
| |
| if (ctrl == ctrls[TORCH_INTENSITY]) { |
| if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| return; |
| |
| led_set_brightness_sync(&v4l2_flash->fled_cdev->led_cdev, |
| brightness); |
| } else { |
| led_set_brightness_sync(&v4l2_flash->iled_cdev->led_cdev, |
| brightness); |
| } |
| } |
| |
| static int v4l2_flash_update_led_brightness(struct v4l2_flash *v4l2_flash, |
| struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| struct led_classdev *led_cdev; |
| int ret; |
| |
| if (ctrl == ctrls[TORCH_INTENSITY]) { |
| /* |
| * Update torch brightness only if in TORCH_MODE. In other modes |
| * torch led is turned off, which would spuriously inform the |
| * user space that V4L2_CID_FLASH_TORCH_INTENSITY control value |
| * has changed to 0. |
| */ |
| if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| return 0; |
| led_cdev = &v4l2_flash->fled_cdev->led_cdev; |
| } else { |
| led_cdev = &v4l2_flash->iled_cdev->led_cdev; |
| } |
| |
| ret = led_update_brightness(led_cdev); |
| if (ret < 0) |
| return ret; |
| |
| if (has_flash_op(v4l2_flash, led_brightness_to_intensity)) |
| ctrl->val = call_flash_op(v4l2_flash, |
| led_brightness_to_intensity, |
| led_cdev->brightness); |
| else |
| ctrl->val = __led_brightness_to_intensity(ctrl, |
| led_cdev->brightness); |
| |
| return 0; |
| } |
| |
| static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c) |
| { |
| struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c); |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| bool is_strobing; |
| int ret; |
| |
| switch (c->id) { |
| case V4L2_CID_FLASH_TORCH_INTENSITY: |
| case V4L2_CID_FLASH_INDICATOR_INTENSITY: |
| return v4l2_flash_update_led_brightness(v4l2_flash, c); |
| case V4L2_CID_FLASH_INTENSITY: |
| ret = led_update_flash_brightness(fled_cdev); |
| if (ret < 0) |
| return ret; |
| /* |
| * No conversion is needed as LED Flash class also uses |
| * microamperes for flash intensity units. |
| */ |
| c->val = fled_cdev->brightness.val; |
| return 0; |
| case V4L2_CID_FLASH_STROBE_STATUS: |
| ret = led_get_flash_strobe(fled_cdev, &is_strobing); |
| if (ret < 0) |
| return ret; |
| c->val = is_strobing; |
| return 0; |
| case V4L2_CID_FLASH_FAULT: |
| /* LED faults map directly to V4L2 flash faults */ |
| return led_get_flash_fault(fled_cdev, &c->val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static bool __software_strobe_mode_inactive(struct v4l2_ctrl **ctrls) |
| { |
| return ((ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) || |
| (ctrls[STROBE_SOURCE] && (ctrls[STROBE_SOURCE]->val != |
| V4L2_FLASH_STROBE_SOURCE_SOFTWARE))); |
| } |
| |
| static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c) |
| { |
| struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c); |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| bool external_strobe; |
| int ret = 0; |
| |
| switch (c->id) { |
| case V4L2_CID_FLASH_LED_MODE: |
| switch (c->val) { |
| case V4L2_FLASH_LED_MODE_NONE: |
| led_set_brightness_sync(led_cdev, LED_OFF); |
| return led_set_flash_strobe(fled_cdev, false); |
| case V4L2_FLASH_LED_MODE_FLASH: |
| /* Turn the torch LED off */ |
| led_set_brightness_sync(led_cdev, LED_OFF); |
| if (ctrls[STROBE_SOURCE]) { |
| external_strobe = (ctrls[STROBE_SOURCE]->val == |
| V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| |
| ret = call_flash_op(v4l2_flash, |
| external_strobe_set, |
| external_strobe); |
| } |
| return ret; |
| case V4L2_FLASH_LED_MODE_TORCH: |
| if (ctrls[STROBE_SOURCE]) { |
| ret = call_flash_op(v4l2_flash, |
| external_strobe_set, |
| false); |
| if (ret < 0) |
| return ret; |
| } |
| /* Stop flash strobing */ |
| ret = led_set_flash_strobe(fled_cdev, false); |
| if (ret < 0) |
| return ret; |
| |
| v4l2_flash_set_led_brightness(v4l2_flash, |
| ctrls[TORCH_INTENSITY]); |
| return 0; |
| } |
| break; |
| case V4L2_CID_FLASH_STROBE_SOURCE: |
| external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| /* |
| * For some hardware arrangements setting strobe source may |
| * affect torch mode. Therefore, if not in the flash mode, |
| * cache only this setting. It will be applied upon switching |
| * to flash mode. |
| */ |
| if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) |
| return 0; |
| |
| return call_flash_op(v4l2_flash, external_strobe_set, |
| external_strobe); |
| case V4L2_CID_FLASH_STROBE: |
| if (__software_strobe_mode_inactive(ctrls)) |
| return -EBUSY; |
| return led_set_flash_strobe(fled_cdev, true); |
| case V4L2_CID_FLASH_STROBE_STOP: |
| if (__software_strobe_mode_inactive(ctrls)) |
| return -EBUSY; |
| return led_set_flash_strobe(fled_cdev, false); |
| case V4L2_CID_FLASH_TIMEOUT: |
| /* |
| * No conversion is needed as LED Flash class also uses |
| * microseconds for flash timeout units. |
| */ |
| return led_set_flash_timeout(fled_cdev, c->val); |
| case V4L2_CID_FLASH_INTENSITY: |
| /* |
| * No conversion is needed as LED Flash class also uses |
| * microamperes for flash intensity units. |
| */ |
| return led_set_flash_brightness(fled_cdev, c->val); |
| case V4L2_CID_FLASH_TORCH_INTENSITY: |
| case V4L2_CID_FLASH_INDICATOR_INTENSITY: |
| v4l2_flash_set_led_brightness(v4l2_flash, c); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = { |
| .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl, |
| .s_ctrl = v4l2_flash_s_ctrl, |
| }; |
| |
| static void __lfs_to_v4l2_ctrl_config(struct led_flash_setting *s, |
| struct v4l2_ctrl_config *c) |
| { |
| c->min = s->min; |
| c->max = s->max; |
| c->step = s->step; |
| c->def = s->val; |
| } |
| |
| static void __fill_ctrl_init_data(struct v4l2_flash *v4l2_flash, |
| struct v4l2_flash_config *flash_cfg, |
| struct v4l2_flash_ctrl_data *ctrl_init_data) |
| { |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops; |
| struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| struct v4l2_ctrl_config *ctrl_cfg; |
| u32 mask; |
| |
| /* Init FLASH_FAULT ctrl data */ |
| if (flash_cfg->flash_faults) { |
| ctrl_init_data[FLASH_FAULT].cid = V4L2_CID_FLASH_FAULT; |
| ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_FAULT; |
| ctrl_cfg->max = flash_cfg->flash_faults; |
| ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| V4L2_CTRL_FLAG_READ_ONLY; |
| } |
| |
| /* Init FLASH_LED_MODE ctrl data */ |
| mask = 1 << V4L2_FLASH_LED_MODE_NONE | |
| 1 << V4L2_FLASH_LED_MODE_TORCH; |
| if (led_cdev->flags & LED_DEV_CAP_FLASH) |
| mask |= 1 << V4L2_FLASH_LED_MODE_FLASH; |
| |
| ctrl_init_data[LED_MODE].cid = V4L2_CID_FLASH_LED_MODE; |
| ctrl_cfg = &ctrl_init_data[LED_MODE].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE; |
| ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH; |
| ctrl_cfg->menu_skip_mask = ~mask; |
| ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE; |
| ctrl_cfg->flags = 0; |
| |
| /* Init TORCH_INTENSITY ctrl data */ |
| ctrl_init_data[TORCH_INTENSITY].cid = V4L2_CID_FLASH_TORCH_INTENSITY; |
| ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config; |
| __lfs_to_v4l2_ctrl_config(&flash_cfg->torch_intensity, ctrl_cfg); |
| ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY; |
| ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| |
| /* Init INDICATOR_INTENSITY ctrl data */ |
| if (v4l2_flash->iled_cdev) { |
| ctrl_init_data[INDICATOR_INTENSITY].cid = |
| V4L2_CID_FLASH_INDICATOR_INTENSITY; |
| ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config; |
| __lfs_to_v4l2_ctrl_config(&flash_cfg->indicator_intensity, |
| ctrl_cfg); |
| ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY; |
| ctrl_cfg->min = 0; |
| ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| } |
| |
| if (!(led_cdev->flags & LED_DEV_CAP_FLASH)) |
| return; |
| |
| /* Init FLASH_STROBE ctrl data */ |
| ctrl_init_data[FLASH_STROBE].cid = V4L2_CID_FLASH_STROBE; |
| ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_STROBE; |
| |
| /* Init STROBE_STOP ctrl data */ |
| ctrl_init_data[STROBE_STOP].cid = V4L2_CID_FLASH_STROBE_STOP; |
| ctrl_cfg = &ctrl_init_data[STROBE_STOP].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP; |
| |
| /* Init FLASH_STROBE_SOURCE ctrl data */ |
| if (flash_cfg->has_external_strobe) { |
| mask = (1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE) | |
| (1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL); |
| ctrl_init_data[STROBE_SOURCE].cid = |
| V4L2_CID_FLASH_STROBE_SOURCE; |
| ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE; |
| ctrl_cfg->max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL; |
| ctrl_cfg->menu_skip_mask = ~mask; |
| ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE; |
| } |
| |
| /* Init STROBE_STATUS ctrl data */ |
| if (fled_cdev_ops->strobe_get) { |
| ctrl_init_data[STROBE_STATUS].cid = |
| V4L2_CID_FLASH_STROBE_STATUS; |
| ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config; |
| ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS; |
| ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| V4L2_CTRL_FLAG_READ_ONLY; |
| } |
| |
| /* Init FLASH_TIMEOUT ctrl data */ |
| if (fled_cdev_ops->timeout_set) { |
| ctrl_init_data[FLASH_TIMEOUT].cid = V4L2_CID_FLASH_TIMEOUT; |
| ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config; |
| __lfs_to_v4l2_ctrl_config(&fled_cdev->timeout, ctrl_cfg); |
| ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT; |
| } |
| |
| /* Init FLASH_INTENSITY ctrl data */ |
| if (fled_cdev_ops->flash_brightness_set) { |
| ctrl_init_data[FLASH_INTENSITY].cid = V4L2_CID_FLASH_INTENSITY; |
| ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config; |
| __lfs_to_v4l2_ctrl_config(&fled_cdev->brightness, ctrl_cfg); |
| ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY; |
| ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE | |
| V4L2_CTRL_FLAG_EXECUTE_ON_WRITE; |
| } |
| } |
| |
| static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash, |
| struct v4l2_flash_config *flash_cfg) |
| |
| { |
| struct v4l2_flash_ctrl_data *ctrl_init_data; |
| struct v4l2_ctrl *ctrl; |
| struct v4l2_ctrl_config *ctrl_cfg; |
| int i, ret, num_ctrls = 0; |
| |
| v4l2_flash->ctrls = devm_kzalloc(v4l2_flash->sd.dev, |
| sizeof(*v4l2_flash->ctrls) * |
| (STROBE_SOURCE + 1), GFP_KERNEL); |
| if (!v4l2_flash->ctrls) |
| return -ENOMEM; |
| |
| /* allocate memory dynamically so as not to exceed stack frame size */ |
| ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data), |
| GFP_KERNEL); |
| if (!ctrl_init_data) |
| return -ENOMEM; |
| |
| __fill_ctrl_init_data(v4l2_flash, flash_cfg, ctrl_init_data); |
| |
| for (i = 0; i < NUM_FLASH_CTRLS; ++i) |
| if (ctrl_init_data[i].cid) |
| ++num_ctrls; |
| |
| v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls); |
| |
| for (i = 0; i < NUM_FLASH_CTRLS; ++i) { |
| ctrl_cfg = &ctrl_init_data[i].config; |
| if (!ctrl_init_data[i].cid) |
| continue; |
| |
| if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE || |
| ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE) |
| ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl, |
| &v4l2_flash_ctrl_ops, |
| ctrl_cfg->id, |
| ctrl_cfg->max, |
| ctrl_cfg->menu_skip_mask, |
| ctrl_cfg->def); |
| else |
| ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl, |
| &v4l2_flash_ctrl_ops, |
| ctrl_cfg->id, |
| ctrl_cfg->min, |
| ctrl_cfg->max, |
| ctrl_cfg->step, |
| ctrl_cfg->def); |
| |
| if (ctrl) |
| ctrl->flags |= ctrl_cfg->flags; |
| |
| if (i <= STROBE_SOURCE) |
| v4l2_flash->ctrls[i] = ctrl; |
| } |
| |
| kfree(ctrl_init_data); |
| |
| if (v4l2_flash->hdl.error) { |
| ret = v4l2_flash->hdl.error; |
| goto error_free_handler; |
| } |
| |
| v4l2_ctrl_handler_setup(&v4l2_flash->hdl); |
| |
| v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl; |
| |
| return 0; |
| |
| error_free_handler: |
| v4l2_ctrl_handler_free(&v4l2_flash->hdl); |
| return ret; |
| } |
| |
| static int __sync_device_with_v4l2_controls(struct v4l2_flash *v4l2_flash) |
| { |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| struct v4l2_ctrl **ctrls = v4l2_flash->ctrls; |
| int ret = 0; |
| |
| v4l2_flash_set_led_brightness(v4l2_flash, ctrls[TORCH_INTENSITY]); |
| |
| if (ctrls[INDICATOR_INTENSITY]) |
| v4l2_flash_set_led_brightness(v4l2_flash, |
| ctrls[INDICATOR_INTENSITY]); |
| |
| if (ctrls[FLASH_TIMEOUT]) { |
| ret = led_set_flash_timeout(fled_cdev, |
| ctrls[FLASH_TIMEOUT]->val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (ctrls[FLASH_INTENSITY]) { |
| ret = led_set_flash_brightness(fled_cdev, |
| ctrls[FLASH_INTENSITY]->val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* |
| * For some hardware arrangements setting strobe source may affect |
| * torch mode. Synchronize strobe source setting only if not in torch |
| * mode. For torch mode case it will get synchronized upon switching |
| * to flash mode. |
| */ |
| if (ctrls[STROBE_SOURCE] && |
| ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH) |
| ret = call_flash_op(v4l2_flash, external_strobe_set, |
| ctrls[STROBE_SOURCE]->val); |
| |
| return ret; |
| } |
| |
| /* |
| * V4L2 subdev internal operations |
| */ |
| |
| static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd); |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| struct led_classdev_flash *iled_cdev = v4l2_flash->iled_cdev; |
| struct led_classdev *led_cdev_ind = NULL; |
| int ret = 0; |
| |
| if (!v4l2_fh_is_singular(&fh->vfh)) |
| return 0; |
| |
| mutex_lock(&led_cdev->led_access); |
| |
| led_sysfs_disable(led_cdev); |
| led_trigger_remove(led_cdev); |
| |
| mutex_unlock(&led_cdev->led_access); |
| |
| if (iled_cdev) { |
| led_cdev_ind = &iled_cdev->led_cdev; |
| |
| mutex_lock(&led_cdev_ind->led_access); |
| |
| led_sysfs_disable(led_cdev_ind); |
| led_trigger_remove(led_cdev_ind); |
| |
| mutex_unlock(&led_cdev_ind->led_access); |
| } |
| |
| ret = __sync_device_with_v4l2_controls(v4l2_flash); |
| if (ret < 0) |
| goto out_sync_device; |
| |
| return 0; |
| out_sync_device: |
| mutex_lock(&led_cdev->led_access); |
| led_sysfs_enable(led_cdev); |
| mutex_unlock(&led_cdev->led_access); |
| |
| if (led_cdev_ind) { |
| mutex_lock(&led_cdev_ind->led_access); |
| led_sysfs_enable(led_cdev_ind); |
| mutex_unlock(&led_cdev_ind->led_access); |
| } |
| |
| return ret; |
| } |
| |
| static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd); |
| struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; |
| struct led_classdev *led_cdev = &fled_cdev->led_cdev; |
| struct led_classdev_flash *iled_cdev = v4l2_flash->iled_cdev; |
| int ret = 0; |
| |
| if (!v4l2_fh_is_singular(&fh->vfh)) |
| return 0; |
| |
| mutex_lock(&led_cdev->led_access); |
| |
| if (v4l2_flash->ctrls[STROBE_SOURCE]) |
| ret = v4l2_ctrl_s_ctrl(v4l2_flash->ctrls[STROBE_SOURCE], |
| V4L2_FLASH_STROBE_SOURCE_SOFTWARE); |
| led_sysfs_enable(led_cdev); |
| |
| mutex_unlock(&led_cdev->led_access); |
| |
| if (iled_cdev) { |
| struct led_classdev *led_cdev_ind = &iled_cdev->led_cdev; |
| |
| mutex_lock(&led_cdev_ind->led_access); |
| led_sysfs_enable(led_cdev_ind); |
| mutex_unlock(&led_cdev_ind->led_access); |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = { |
| .open = v4l2_flash_open, |
| .close = v4l2_flash_close, |
| }; |
| |
| static const struct v4l2_subdev_ops v4l2_flash_subdev_ops; |
| |
| struct v4l2_flash *v4l2_flash_init( |
| struct device *dev, struct fwnode_handle *fwn, |
| struct led_classdev_flash *fled_cdev, |
| struct led_classdev_flash *iled_cdev, |
| const struct v4l2_flash_ops *ops, |
| struct v4l2_flash_config *config) |
| { |
| struct v4l2_flash *v4l2_flash; |
| struct led_classdev *led_cdev; |
| struct v4l2_subdev *sd; |
| int ret; |
| |
| if (!fled_cdev || !ops || !config) |
| return ERR_PTR(-EINVAL); |
| |
| led_cdev = &fled_cdev->led_cdev; |
| |
| v4l2_flash = devm_kzalloc(led_cdev->dev, sizeof(*v4l2_flash), |
| GFP_KERNEL); |
| if (!v4l2_flash) |
| return ERR_PTR(-ENOMEM); |
| |
| sd = &v4l2_flash->sd; |
| v4l2_flash->fled_cdev = fled_cdev; |
| v4l2_flash->iled_cdev = iled_cdev; |
| v4l2_flash->ops = ops; |
| sd->dev = dev; |
| sd->fwnode = fwn ? fwn : dev_fwnode(led_cdev->dev); |
| v4l2_subdev_init(sd, &v4l2_flash_subdev_ops); |
| sd->internal_ops = &v4l2_flash_subdev_internal_ops; |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| strlcpy(sd->name, config->dev_name, sizeof(sd->name)); |
| |
| ret = media_entity_pads_init(&sd->entity, 0, NULL); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| sd->entity.function = MEDIA_ENT_F_FLASH; |
| |
| ret = v4l2_flash_init_controls(v4l2_flash, config); |
| if (ret < 0) |
| goto err_init_controls; |
| |
| fwnode_handle_get(sd->fwnode); |
| |
| ret = v4l2_async_register_subdev(sd); |
| if (ret < 0) |
| goto err_async_register_sd; |
| |
| return v4l2_flash; |
| |
| err_async_register_sd: |
| fwnode_handle_put(sd->fwnode); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| err_init_controls: |
| media_entity_cleanup(&sd->entity); |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(v4l2_flash_init); |
| |
| void v4l2_flash_release(struct v4l2_flash *v4l2_flash) |
| { |
| struct v4l2_subdev *sd; |
| |
| if (IS_ERR_OR_NULL(v4l2_flash)) |
| return; |
| |
| sd = &v4l2_flash->sd; |
| |
| v4l2_async_unregister_subdev(sd); |
| |
| fwnode_handle_put(sd->fwnode); |
| |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| media_entity_cleanup(&sd->entity); |
| } |
| EXPORT_SYMBOL_GPL(v4l2_flash_release); |
| |
| MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); |
| MODULE_DESCRIPTION("V4L2 Flash sub-device helpers"); |
| MODULE_LICENSE("GPL v2"); |