| /** |
| * core.c - DesignWare USB3 DRD Controller Core file |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/io.h> |
| #include <linux/list.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of.h> |
| #include <linux/acpi.h> |
| #include <linux/pinctrl/consumer.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/otg.h> |
| |
| #include "platform_data.h" |
| #include "core.h" |
| #include "gadget.h" |
| #include "io.h" |
| |
| #include "debug.h" |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| void dwc3_set_mode(struct dwc3 *dwc, u32 mode) |
| { |
| u32 reg; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); |
| reg |= DWC3_GCTL_PRTCAPDIR(mode); |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| } |
| |
| /** |
| * dwc3_core_soft_reset - Issues core soft reset and PHY reset |
| * @dwc: pointer to our context structure |
| */ |
| static int dwc3_core_soft_reset(struct dwc3 *dwc) |
| { |
| u32 reg; |
| int ret; |
| |
| /* Before Resetting PHY, put Core in Reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg |= DWC3_GCTL_CORESOFTRESET; |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| /* Assert USB3 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); |
| reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); |
| |
| /* Assert USB2 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); |
| reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| |
| usb_phy_init(dwc->usb2_phy); |
| usb_phy_init(dwc->usb3_phy); |
| ret = phy_init(dwc->usb2_generic_phy); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_init(dwc->usb3_generic_phy); |
| if (ret < 0) { |
| phy_exit(dwc->usb2_generic_phy); |
| return ret; |
| } |
| mdelay(100); |
| |
| /* Clear USB3 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); |
| reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); |
| |
| /* Clear USB2 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); |
| reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| |
| mdelay(100); |
| |
| /* After PHYs are stable we can take Core out of reset state */ |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~DWC3_GCTL_CORESOFTRESET; |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_soft_reset - Issue soft reset |
| * @dwc: Pointer to our controller context structure |
| */ |
| static int dwc3_soft_reset(struct dwc3 *dwc) |
| { |
| unsigned long timeout; |
| u32 reg; |
| |
| timeout = jiffies + msecs_to_jiffies(500); |
| dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); |
| do { |
| reg = dwc3_readl(dwc->regs, DWC3_DCTL); |
| if (!(reg & DWC3_DCTL_CSFTRST)) |
| break; |
| |
| if (time_after(jiffies, timeout)) { |
| dev_err(dwc->dev, "Reset Timed Out\n"); |
| return -ETIMEDOUT; |
| } |
| |
| cpu_relax(); |
| } while (true); |
| |
| return 0; |
| } |
| |
| /* |
| * dwc3_frame_length_adjustment - Adjusts frame length if required |
| * @dwc3: Pointer to our controller context structure |
| * @fladj: Value of GFLADJ_30MHZ to adjust frame length |
| */ |
| static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj) |
| { |
| u32 reg; |
| u32 dft; |
| |
| if (dwc->revision < DWC3_REVISION_250A) |
| return; |
| |
| if (fladj == 0) |
| return; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GFLADJ); |
| dft = reg & DWC3_GFLADJ_30MHZ_MASK; |
| if (!dev_WARN_ONCE(dwc->dev, dft == fladj, |
| "request value same as default, ignoring\n")) { |
| reg &= ~DWC3_GFLADJ_30MHZ_MASK; |
| reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj; |
| dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); |
| } |
| } |
| |
| /** |
| * dwc3_free_one_event_buffer - Frees one event buffer |
| * @dwc: Pointer to our controller context structure |
| * @evt: Pointer to event buffer to be freed |
| */ |
| static void dwc3_free_one_event_buffer(struct dwc3 *dwc, |
| struct dwc3_event_buffer *evt) |
| { |
| dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); |
| } |
| |
| /** |
| * dwc3_alloc_one_event_buffer - Allocates one event buffer structure |
| * @dwc: Pointer to our controller context structure |
| * @length: size of the event buffer |
| * |
| * Returns a pointer to the allocated event buffer structure on success |
| * otherwise ERR_PTR(errno). |
| */ |
| static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, |
| unsigned length) |
| { |
| struct dwc3_event_buffer *evt; |
| |
| evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); |
| if (!evt) |
| return ERR_PTR(-ENOMEM); |
| |
| evt->dwc = dwc; |
| evt->length = length; |
| evt->buf = dma_alloc_coherent(dwc->dev, length, |
| &evt->dma, GFP_KERNEL); |
| if (!evt->buf) |
| return ERR_PTR(-ENOMEM); |
| |
| return evt; |
| } |
| |
| /** |
| * dwc3_free_event_buffers - frees all allocated event buffers |
| * @dwc: Pointer to our controller context structure |
| */ |
| static void dwc3_free_event_buffers(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int i; |
| |
| for (i = 0; i < dwc->num_event_buffers; i++) { |
| evt = dwc->ev_buffs[i]; |
| if (evt) |
| dwc3_free_one_event_buffer(dwc, evt); |
| } |
| } |
| |
| /** |
| * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length |
| * @dwc: pointer to our controller context structure |
| * @length: size of event buffer |
| * |
| * Returns 0 on success otherwise negative errno. In the error case, dwc |
| * may contain some buffers allocated but not all which were requested. |
| */ |
| static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) |
| { |
| int num; |
| int i; |
| |
| num = DWC3_NUM_INT(dwc->hwparams.hwparams1); |
| dwc->num_event_buffers = num; |
| |
| dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, |
| GFP_KERNEL); |
| if (!dwc->ev_buffs) |
| return -ENOMEM; |
| |
| for (i = 0; i < num; i++) { |
| struct dwc3_event_buffer *evt; |
| |
| evt = dwc3_alloc_one_event_buffer(dwc, length); |
| if (IS_ERR(evt)) { |
| dev_err(dwc->dev, "can't allocate event buffer\n"); |
| return PTR_ERR(evt); |
| } |
| dwc->ev_buffs[i] = evt; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_event_buffers_setup - setup our allocated event buffers |
| * @dwc: pointer to our controller context structure |
| * |
| * Returns 0 on success otherwise negative errno. |
| */ |
| static int dwc3_event_buffers_setup(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int n; |
| |
| for (n = 0; n < dwc->num_event_buffers; n++) { |
| evt = dwc->ev_buffs[n]; |
| dwc3_trace(trace_dwc3_core, |
| "Event buf %p dma %08llx length %d\n", |
| evt->buf, (unsigned long long) evt->dma, |
| evt->length); |
| |
| evt->lpos = 0; |
| |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), |
| lower_32_bits(evt->dma)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), |
| upper_32_bits(evt->dma)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), |
| DWC3_GEVNTSIZ_SIZE(evt->length)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); |
| } |
| |
| return 0; |
| } |
| |
| static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int n; |
| |
| for (n = 0; n < dwc->num_event_buffers; n++) { |
| evt = dwc->ev_buffs[n]; |
| |
| evt->lpos = 0; |
| |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK |
| | DWC3_GEVNTSIZ_SIZE(0)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); |
| } |
| } |
| |
| static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) |
| { |
| if (!dwc->has_hibernation) |
| return 0; |
| |
| if (!dwc->nr_scratch) |
| return 0; |
| |
| dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, |
| DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); |
| if (!dwc->scratchbuf) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) |
| { |
| dma_addr_t scratch_addr; |
| u32 param; |
| int ret; |
| |
| if (!dwc->has_hibernation) |
| return 0; |
| |
| if (!dwc->nr_scratch) |
| return 0; |
| |
| /* should never fall here */ |
| if (!WARN_ON(dwc->scratchbuf)) |
| return 0; |
| |
| scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, |
| dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, |
| DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(dwc->dev, scratch_addr)) { |
| dev_err(dwc->dev, "failed to map scratch buffer\n"); |
| ret = -EFAULT; |
| goto err0; |
| } |
| |
| dwc->scratch_addr = scratch_addr; |
| |
| param = lower_32_bits(scratch_addr); |
| |
| ret = dwc3_send_gadget_generic_command(dwc, |
| DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); |
| if (ret < 0) |
| goto err1; |
| |
| param = upper_32_bits(scratch_addr); |
| |
| ret = dwc3_send_gadget_generic_command(dwc, |
| DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); |
| if (ret < 0) |
| goto err1; |
| |
| return 0; |
| |
| err1: |
| dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * |
| DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); |
| |
| err0: |
| return ret; |
| } |
| |
| static void dwc3_free_scratch_buffers(struct dwc3 *dwc) |
| { |
| if (!dwc->has_hibernation) |
| return; |
| |
| if (!dwc->nr_scratch) |
| return; |
| |
| /* should never fall here */ |
| if (!WARN_ON(dwc->scratchbuf)) |
| return; |
| |
| dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * |
| DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); |
| kfree(dwc->scratchbuf); |
| } |
| |
| static void dwc3_core_num_eps(struct dwc3 *dwc) |
| { |
| struct dwc3_hwparams *parms = &dwc->hwparams; |
| |
| dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); |
| dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; |
| |
| dwc3_trace(trace_dwc3_core, "found %d IN and %d OUT endpoints", |
| dwc->num_in_eps, dwc->num_out_eps); |
| } |
| |
| static void dwc3_cache_hwparams(struct dwc3 *dwc) |
| { |
| struct dwc3_hwparams *parms = &dwc->hwparams; |
| |
| parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); |
| parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); |
| parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); |
| parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); |
| parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); |
| parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); |
| parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); |
| parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); |
| parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); |
| } |
| |
| /** |
| * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core |
| * @dwc: Pointer to our controller context structure |
| * |
| * Returns 0 on success. The USB PHY interfaces are configured but not |
| * initialized. The PHY interfaces and the PHYs get initialized together with |
| * the core in dwc3_core_init. |
| */ |
| static int dwc3_phy_setup(struct dwc3 *dwc) |
| { |
| u32 reg; |
| int ret; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); |
| |
| /* |
| * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY |
| * to '0' during coreConsultant configuration. So default value |
| * will be '0' when the core is reset. Application needs to set it |
| * to '1' after the core initialization is completed. |
| */ |
| if (dwc->revision > DWC3_REVISION_194A) |
| reg |= DWC3_GUSB3PIPECTL_SUSPHY; |
| |
| if (dwc->u2ss_inp3_quirk) |
| reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; |
| |
| if (dwc->req_p1p2p3_quirk) |
| reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; |
| |
| if (dwc->del_p1p2p3_quirk) |
| reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN; |
| |
| if (dwc->del_phy_power_chg_quirk) |
| reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE; |
| |
| if (dwc->lfps_filter_quirk) |
| reg |= DWC3_GUSB3PIPECTL_LFPSFILT; |
| |
| if (dwc->rx_detect_poll_quirk) |
| reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL; |
| |
| if (dwc->tx_de_emphasis_quirk) |
| reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); |
| |
| if (dwc->dis_u3_susphy_quirk) |
| reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; |
| |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); |
| |
| /* Select the HS PHY interface */ |
| switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { |
| case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI: |
| if (dwc->hsphy_interface && |
| !strncmp(dwc->hsphy_interface, "utmi", 4)) { |
| reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI; |
| break; |
| } else if (dwc->hsphy_interface && |
| !strncmp(dwc->hsphy_interface, "ulpi", 4)) { |
| reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| } else { |
| /* Relying on default value. */ |
| if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) |
| break; |
| } |
| /* FALLTHROUGH */ |
| case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: |
| /* Making sure the interface and PHY are operational */ |
| ret = dwc3_soft_reset(dwc); |
| if (ret) |
| return ret; |
| |
| udelay(1); |
| |
| ret = dwc3_ulpi_init(dwc); |
| if (ret) |
| return ret; |
| /* FALLTHROUGH */ |
| default: |
| break; |
| } |
| |
| /* |
| * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to |
| * '0' during coreConsultant configuration. So default value will |
| * be '0' when the core is reset. Application needs to set it to |
| * '1' after the core initialization is completed. |
| */ |
| if (dwc->revision > DWC3_REVISION_194A) |
| reg |= DWC3_GUSB2PHYCFG_SUSPHY; |
| |
| if (dwc->dis_u2_susphy_quirk) |
| reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; |
| |
| if (dwc->dis_enblslpm_quirk) |
| reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; |
| |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_core_init - Low-level initialization of DWC3 Core |
| * @dwc: Pointer to our controller context structure |
| * |
| * Returns 0 on success otherwise negative errno. |
| */ |
| static int dwc3_core_init(struct dwc3 *dwc) |
| { |
| u32 hwparams4 = dwc->hwparams.hwparams4; |
| u32 reg; |
| int ret; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); |
| /* This should read as U3 followed by revision number */ |
| if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) { |
| /* Detected DWC_usb3 IP */ |
| dwc->revision = reg; |
| } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) { |
| /* Detected DWC_usb31 IP */ |
| dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); |
| dwc->revision |= DWC3_REVISION_IS_DWC31; |
| } else { |
| dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); |
| ret = -ENODEV; |
| goto err0; |
| } |
| |
| /* |
| * Write Linux Version Code to our GUID register so it's easy to figure |
| * out which kernel version a bug was found. |
| */ |
| dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); |
| |
| /* Handle USB2.0-only core configuration */ |
| if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == |
| DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { |
| if (dwc->maximum_speed == USB_SPEED_SUPER) |
| dwc->maximum_speed = USB_SPEED_HIGH; |
| } |
| |
| /* issue device SoftReset too */ |
| ret = dwc3_soft_reset(dwc); |
| if (ret) |
| goto err0; |
| |
| ret = dwc3_core_soft_reset(dwc); |
| if (ret) |
| goto err0; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~DWC3_GCTL_SCALEDOWN_MASK; |
| |
| switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { |
| case DWC3_GHWPARAMS1_EN_PWROPT_CLK: |
| /** |
| * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an |
| * issue which would cause xHCI compliance tests to fail. |
| * |
| * Because of that we cannot enable clock gating on such |
| * configurations. |
| * |
| * Refers to: |
| * |
| * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based |
| * SOF/ITP Mode Used |
| */ |
| if ((dwc->dr_mode == USB_DR_MODE_HOST || |
| dwc->dr_mode == USB_DR_MODE_OTG) && |
| (dwc->revision >= DWC3_REVISION_210A && |
| dwc->revision <= DWC3_REVISION_250A)) |
| reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; |
| else |
| reg &= ~DWC3_GCTL_DSBLCLKGTNG; |
| break; |
| case DWC3_GHWPARAMS1_EN_PWROPT_HIB: |
| /* enable hibernation here */ |
| dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); |
| |
| /* |
| * REVISIT Enabling this bit so that host-mode hibernation |
| * will work. Device-mode hibernation is not yet implemented. |
| */ |
| reg |= DWC3_GCTL_GBLHIBERNATIONEN; |
| break; |
| default: |
| dwc3_trace(trace_dwc3_core, "No power optimization available\n"); |
| } |
| |
| /* check if current dwc3 is on simulation board */ |
| if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { |
| dwc3_trace(trace_dwc3_core, |
| "running on FPGA platform\n"); |
| dwc->is_fpga = true; |
| } |
| |
| WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga, |
| "disable_scramble cannot be used on non-FPGA builds\n"); |
| |
| if (dwc->disable_scramble_quirk && dwc->is_fpga) |
| reg |= DWC3_GCTL_DISSCRAMBLE; |
| else |
| reg &= ~DWC3_GCTL_DISSCRAMBLE; |
| |
| if (dwc->u2exit_lfps_quirk) |
| reg |= DWC3_GCTL_U2EXIT_LFPS; |
| |
| /* |
| * WORKAROUND: DWC3 revisions <1.90a have a bug |
| * where the device can fail to connect at SuperSpeed |
| * and falls back to high-speed mode which causes |
| * the device to enter a Connect/Disconnect loop |
| */ |
| if (dwc->revision < DWC3_REVISION_190A) |
| reg |= DWC3_GCTL_U2RSTECN; |
| |
| dwc3_core_num_eps(dwc); |
| |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| ret = dwc3_alloc_scratch_buffers(dwc); |
| if (ret) |
| goto err1; |
| |
| ret = dwc3_setup_scratch_buffers(dwc); |
| if (ret) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| dwc3_free_scratch_buffers(dwc); |
| |
| err1: |
| usb_phy_shutdown(dwc->usb2_phy); |
| usb_phy_shutdown(dwc->usb3_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| |
| err0: |
| return ret; |
| } |
| |
| static void dwc3_core_exit(struct dwc3 *dwc) |
| { |
| dwc3_free_scratch_buffers(dwc); |
| usb_phy_shutdown(dwc->usb2_phy); |
| usb_phy_shutdown(dwc->usb3_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| } |
| |
| static int dwc3_core_get_phy(struct dwc3 *dwc) |
| { |
| struct device *dev = dwc->dev; |
| struct device_node *node = dev->of_node; |
| int ret; |
| |
| if (node) { |
| dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); |
| dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); |
| } else { |
| dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); |
| dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); |
| } |
| |
| if (IS_ERR(dwc->usb2_phy)) { |
| ret = PTR_ERR(dwc->usb2_phy); |
| if (ret == -ENXIO || ret == -ENODEV) { |
| dwc->usb2_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb2 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| if (IS_ERR(dwc->usb3_phy)) { |
| ret = PTR_ERR(dwc->usb3_phy); |
| if (ret == -ENXIO || ret == -ENODEV) { |
| dwc->usb3_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb3 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); |
| if (IS_ERR(dwc->usb2_generic_phy)) { |
| ret = PTR_ERR(dwc->usb2_generic_phy); |
| if (ret == -ENOSYS || ret == -ENODEV) { |
| dwc->usb2_generic_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb2 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); |
| if (IS_ERR(dwc->usb3_generic_phy)) { |
| ret = PTR_ERR(dwc->usb3_generic_phy); |
| if (ret == -ENOSYS || ret == -ENODEV) { |
| dwc->usb3_generic_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb3 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dwc3_core_init_mode(struct dwc3 *dwc) |
| { |
| struct device *dev = dwc->dev; |
| int ret; |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); |
| ret = dwc3_gadget_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| return ret; |
| } |
| break; |
| case USB_DR_MODE_HOST: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); |
| ret = dwc3_host_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| return ret; |
| } |
| break; |
| case USB_DR_MODE_OTG: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); |
| ret = dwc3_host_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| return ret; |
| } |
| |
| ret = dwc3_gadget_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| return ret; |
| } |
| break; |
| default: |
| dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void dwc3_core_exit_mode(struct dwc3 *dwc) |
| { |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| dwc3_gadget_exit(dwc); |
| break; |
| case USB_DR_MODE_HOST: |
| dwc3_host_exit(dwc); |
| break; |
| case USB_DR_MODE_OTG: |
| dwc3_host_exit(dwc); |
| dwc3_gadget_exit(dwc); |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| } |
| |
| #define DWC3_ALIGN_MASK (16 - 1) |
| |
| static int dwc3_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct dwc3_platform_data *pdata = dev_get_platdata(dev); |
| struct resource *res; |
| struct dwc3 *dwc; |
| u8 lpm_nyet_threshold; |
| u8 tx_de_emphasis; |
| u8 hird_threshold; |
| u32 fladj = 0; |
| |
| int ret; |
| |
| void __iomem *regs; |
| void *mem; |
| |
| mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| |
| dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); |
| dwc->mem = mem; |
| dwc->dev = dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(dev, "missing IRQ\n"); |
| return -ENODEV; |
| } |
| dwc->xhci_resources[1].start = res->start; |
| dwc->xhci_resources[1].end = res->end; |
| dwc->xhci_resources[1].flags = res->flags; |
| dwc->xhci_resources[1].name = res->name; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "missing memory resource\n"); |
| return -ENODEV; |
| } |
| |
| dwc->xhci_resources[0].start = res->start; |
| dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + |
| DWC3_XHCI_REGS_END; |
| dwc->xhci_resources[0].flags = res->flags; |
| dwc->xhci_resources[0].name = res->name; |
| |
| res->start += DWC3_GLOBALS_REGS_START; |
| |
| /* |
| * Request memory region but exclude xHCI regs, |
| * since it will be requested by the xhci-plat driver. |
| */ |
| regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(regs)) { |
| ret = PTR_ERR(regs); |
| goto err0; |
| } |
| |
| dwc->regs = regs; |
| dwc->regs_size = resource_size(res); |
| |
| /* default to highest possible threshold */ |
| lpm_nyet_threshold = 0xff; |
| |
| /* default to -3.5dB de-emphasis */ |
| tx_de_emphasis = 1; |
| |
| /* |
| * default to assert utmi_sleep_n and use maximum allowed HIRD |
| * threshold value of 0b1100 |
| */ |
| hird_threshold = 12; |
| |
| dwc->maximum_speed = usb_get_maximum_speed(dev); |
| dwc->dr_mode = usb_get_dr_mode(dev); |
| |
| dwc->has_lpm_erratum = device_property_read_bool(dev, |
| "snps,has-lpm-erratum"); |
| device_property_read_u8(dev, "snps,lpm-nyet-threshold", |
| &lpm_nyet_threshold); |
| dwc->is_utmi_l1_suspend = device_property_read_bool(dev, |
| "snps,is-utmi-l1-suspend"); |
| device_property_read_u8(dev, "snps,hird-threshold", |
| &hird_threshold); |
| dwc->usb3_lpm_capable = device_property_read_bool(dev, |
| "snps,usb3_lpm_capable"); |
| |
| dwc->needs_fifo_resize = device_property_read_bool(dev, |
| "tx-fifo-resize"); |
| |
| dwc->disable_scramble_quirk = device_property_read_bool(dev, |
| "snps,disable_scramble_quirk"); |
| dwc->u2exit_lfps_quirk = device_property_read_bool(dev, |
| "snps,u2exit_lfps_quirk"); |
| dwc->u2ss_inp3_quirk = device_property_read_bool(dev, |
| "snps,u2ss_inp3_quirk"); |
| dwc->req_p1p2p3_quirk = device_property_read_bool(dev, |
| "snps,req_p1p2p3_quirk"); |
| dwc->del_p1p2p3_quirk = device_property_read_bool(dev, |
| "snps,del_p1p2p3_quirk"); |
| dwc->del_phy_power_chg_quirk = device_property_read_bool(dev, |
| "snps,del_phy_power_chg_quirk"); |
| dwc->lfps_filter_quirk = device_property_read_bool(dev, |
| "snps,lfps_filter_quirk"); |
| dwc->rx_detect_poll_quirk = device_property_read_bool(dev, |
| "snps,rx_detect_poll_quirk"); |
| dwc->dis_u3_susphy_quirk = device_property_read_bool(dev, |
| "snps,dis_u3_susphy_quirk"); |
| dwc->dis_u2_susphy_quirk = device_property_read_bool(dev, |
| "snps,dis_u2_susphy_quirk"); |
| dwc->dis_enblslpm_quirk = device_property_read_bool(dev, |
| "snps,dis_enblslpm_quirk"); |
| |
| dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, |
| "snps,tx_de_emphasis_quirk"); |
| device_property_read_u8(dev, "snps,tx_de_emphasis", |
| &tx_de_emphasis); |
| device_property_read_string(dev, "snps,hsphy_interface", |
| &dwc->hsphy_interface); |
| device_property_read_u32(dev, "snps,quirk-frame-length-adjustment", |
| &fladj); |
| |
| if (pdata) { |
| dwc->maximum_speed = pdata->maximum_speed; |
| dwc->has_lpm_erratum = pdata->has_lpm_erratum; |
| if (pdata->lpm_nyet_threshold) |
| lpm_nyet_threshold = pdata->lpm_nyet_threshold; |
| dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend; |
| if (pdata->hird_threshold) |
| hird_threshold = pdata->hird_threshold; |
| |
| dwc->needs_fifo_resize = pdata->tx_fifo_resize; |
| dwc->usb3_lpm_capable = pdata->usb3_lpm_capable; |
| dwc->dr_mode = pdata->dr_mode; |
| |
| dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; |
| dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk; |
| dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk; |
| dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk; |
| dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk; |
| dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk; |
| dwc->lfps_filter_quirk = pdata->lfps_filter_quirk; |
| dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk; |
| dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk; |
| dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk; |
| dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk; |
| |
| dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; |
| if (pdata->tx_de_emphasis) |
| tx_de_emphasis = pdata->tx_de_emphasis; |
| |
| dwc->hsphy_interface = pdata->hsphy_interface; |
| fladj = pdata->fladj_value; |
| } |
| |
| dwc->lpm_nyet_threshold = lpm_nyet_threshold; |
| dwc->tx_de_emphasis = tx_de_emphasis; |
| |
| dwc->hird_threshold = hird_threshold |
| | (dwc->is_utmi_l1_suspend << 4); |
| |
| platform_set_drvdata(pdev, dwc); |
| dwc3_cache_hwparams(dwc); |
| |
| ret = dwc3_phy_setup(dwc); |
| if (ret) |
| goto err0; |
| |
| ret = dwc3_core_get_phy(dwc); |
| if (ret) |
| goto err0; |
| |
| spin_lock_init(&dwc->lock); |
| |
| if (!dev->dma_mask) { |
| dev->dma_mask = dev->parent->dma_mask; |
| dev->dma_parms = dev->parent->dma_parms; |
| dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); |
| } |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| pm_runtime_forbid(dev); |
| |
| ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); |
| if (ret) { |
| dev_err(dwc->dev, "failed to allocate event buffers\n"); |
| ret = -ENOMEM; |
| goto err1; |
| } |
| |
| if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) |
| dwc->dr_mode = USB_DR_MODE_HOST; |
| else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) |
| dwc->dr_mode = USB_DR_MODE_PERIPHERAL; |
| |
| if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) |
| dwc->dr_mode = USB_DR_MODE_OTG; |
| |
| ret = dwc3_core_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize core\n"); |
| goto err1; |
| } |
| |
| /* Check the maximum_speed parameter */ |
| switch (dwc->maximum_speed) { |
| case USB_SPEED_LOW: |
| case USB_SPEED_FULL: |
| case USB_SPEED_HIGH: |
| case USB_SPEED_SUPER: |
| case USB_SPEED_SUPER_PLUS: |
| break; |
| default: |
| dev_err(dev, "invalid maximum_speed parameter %d\n", |
| dwc->maximum_speed); |
| /* fall through */ |
| case USB_SPEED_UNKNOWN: |
| /* default to superspeed */ |
| dwc->maximum_speed = USB_SPEED_SUPER; |
| |
| /* |
| * default to superspeed plus if we are capable. |
| */ |
| if (dwc3_is_usb31(dwc) && |
| (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == |
| DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) |
| dwc->maximum_speed = USB_SPEED_SUPER_PLUS; |
| |
| break; |
| } |
| |
| /* Adjust Frame Length */ |
| dwc3_frame_length_adjustment(dwc, fladj); |
| |
| usb_phy_set_suspend(dwc->usb2_phy, 0); |
| usb_phy_set_suspend(dwc->usb3_phy, 0); |
| ret = phy_power_on(dwc->usb2_generic_phy); |
| if (ret < 0) |
| goto err2; |
| |
| ret = phy_power_on(dwc->usb3_generic_phy); |
| if (ret < 0) |
| goto err3; |
| |
| ret = dwc3_event_buffers_setup(dwc); |
| if (ret) { |
| dev_err(dwc->dev, "failed to setup event buffers\n"); |
| goto err4; |
| } |
| |
| ret = dwc3_core_init_mode(dwc); |
| if (ret) |
| goto err5; |
| |
| ret = dwc3_debugfs_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize debugfs\n"); |
| goto err6; |
| } |
| |
| pm_runtime_allow(dev); |
| |
| return 0; |
| |
| err6: |
| dwc3_core_exit_mode(dwc); |
| |
| err5: |
| dwc3_event_buffers_cleanup(dwc); |
| |
| err4: |
| phy_power_off(dwc->usb3_generic_phy); |
| |
| err3: |
| phy_power_off(dwc->usb2_generic_phy); |
| |
| err2: |
| usb_phy_set_suspend(dwc->usb2_phy, 1); |
| usb_phy_set_suspend(dwc->usb3_phy, 1); |
| dwc3_core_exit(dwc); |
| |
| err1: |
| dwc3_free_event_buffers(dwc); |
| dwc3_ulpi_exit(dwc); |
| |
| err0: |
| /* |
| * restore res->start back to its original value so that, in case the |
| * probe is deferred, we don't end up getting error in request the |
| * memory region the next time probe is called. |
| */ |
| res->start -= DWC3_GLOBALS_REGS_START; |
| |
| return ret; |
| } |
| |
| static int dwc3_remove(struct platform_device *pdev) |
| { |
| struct dwc3 *dwc = platform_get_drvdata(pdev); |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| /* |
| * restore res->start back to its original value so that, in case the |
| * probe is deferred, we don't end up getting error in request the |
| * memory region the next time probe is called. |
| */ |
| res->start -= DWC3_GLOBALS_REGS_START; |
| |
| dwc3_debugfs_exit(dwc); |
| dwc3_core_exit_mode(dwc); |
| dwc3_event_buffers_cleanup(dwc); |
| dwc3_free_event_buffers(dwc); |
| |
| usb_phy_set_suspend(dwc->usb2_phy, 1); |
| usb_phy_set_suspend(dwc->usb3_phy, 1); |
| phy_power_off(dwc->usb2_generic_phy); |
| phy_power_off(dwc->usb3_generic_phy); |
| |
| dwc3_core_exit(dwc); |
| dwc3_ulpi_exit(dwc); |
| |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int dwc3_suspend(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_suspend(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| dwc3_event_buffers_cleanup(dwc); |
| break; |
| } |
| |
| dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| |
| usb_phy_shutdown(dwc->usb3_phy); |
| usb_phy_shutdown(dwc->usb2_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| |
| pinctrl_pm_select_sleep_state(dev); |
| |
| return 0; |
| } |
| |
| static int dwc3_resume(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| int ret; |
| |
| pinctrl_pm_select_default_state(dev); |
| |
| usb_phy_init(dwc->usb3_phy); |
| usb_phy_init(dwc->usb2_phy); |
| ret = phy_init(dwc->usb2_generic_phy); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_init(dwc->usb3_generic_phy); |
| if (ret < 0) |
| goto err_usb2phy_init; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| dwc3_event_buffers_setup(dwc); |
| dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_resume(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| /* do nothing */ |
| break; |
| } |
| |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| |
| err_usb2phy_init: |
| phy_exit(dwc->usb2_generic_phy); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops dwc3_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) |
| }; |
| |
| #define DWC3_PM_OPS &(dwc3_dev_pm_ops) |
| #else |
| #define DWC3_PM_OPS NULL |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id of_dwc3_match[] = { |
| { |
| .compatible = "snps,dwc3" |
| }, |
| { |
| .compatible = "synopsys,dwc3" |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, of_dwc3_match); |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| |
| #define ACPI_ID_INTEL_BSW "808622B7" |
| |
| static const struct acpi_device_id dwc3_acpi_match[] = { |
| { ACPI_ID_INTEL_BSW, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); |
| #endif |
| |
| static struct platform_driver dwc3_driver = { |
| .probe = dwc3_probe, |
| .remove = dwc3_remove, |
| .driver = { |
| .name = "dwc3", |
| .of_match_table = of_match_ptr(of_dwc3_match), |
| .acpi_match_table = ACPI_PTR(dwc3_acpi_match), |
| .pm = DWC3_PM_OPS, |
| }, |
| }; |
| |
| module_platform_driver(dwc3_driver); |
| |
| MODULE_ALIAS("platform:dwc3"); |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); |