PCI: tegra: Make sure the PCIe PLL is really reset
Depending on the prior state of the controller, the PLL reset may not be
pulsed. Clear the register bit and set it after a small delay to ensure
that the PLL is really reset.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Eric Yuen <eyuen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 6329be3..79fd92c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -849,6 +849,13 @@
value |= PADS_PLL_CTL_REFCLK_INTERNAL_CML | soc->tx_ref_sel;
pads_writel(pcie, value, soc->pads_pll_ctl);
+ /* reset PLL */
+ value = pads_readl(pcie, soc->pads_pll_ctl);
+ value &= ~PADS_PLL_CTL_RST_B4SM;
+ pads_writel(pcie, value, soc->pads_pll_ctl);
+
+ usleep_range(20, 100);
+
/* take PLL out of reset */
value = pads_readl(pcie, soc->pads_pll_ctl);
value |= PADS_PLL_CTL_RST_B4SM;