| /* |
| * intel TCO Watchdog Driver |
| * |
| * (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor |
| * provide warranty for any of this software. This material is |
| * provided "AS-IS" and at no charge. |
| * |
| * The TCO watchdog is implemented in the following I/O controller hubs: |
| * (See the intel documentation on http://developer.intel.com.) |
| * document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO) |
| * document number 290687-002, 298242-027: 82801BA (ICH2) |
| * document number 290733-003, 290739-013: 82801CA (ICH3-S) |
| * document number 290716-001, 290718-007: 82801CAM (ICH3-M) |
| * document number 290744-001, 290745-025: 82801DB (ICH4) |
| * document number 252337-001, 252663-008: 82801DBM (ICH4-M) |
| * document number 273599-001, 273645-002: 82801E (C-ICH) |
| * document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R) |
| * document number 300641-004, 300884-013: 6300ESB |
| * document number 301473-002, 301474-026: 82801F (ICH6) |
| * document number 313082-001, 313075-006: 631xESB, 632xESB |
| * document number 307013-003, 307014-024: 82801G (ICH7) |
| * document number 322896-001, 322897-001: NM10 |
| * document number 313056-003, 313057-017: 82801H (ICH8) |
| * document number 316972-004, 316973-012: 82801I (ICH9) |
| * document number 319973-002, 319974-002: 82801J (ICH10) |
| * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) |
| * document number 320066-003, 320257-008: EP80597 (IICH) |
| * document number 324645-001, 324646-001: Cougar Point (CPT) |
| * document number TBD : Patsburg (PBG) |
| * document number TBD : DH89xxCC |
| * document number TBD : Panther Point |
| * document number TBD : Lynx Point |
| */ |
| |
| /* |
| * Includes, defines, variables, module parameters, ... |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| /* Module and version information */ |
| #define DRV_NAME "iTCO_wdt" |
| #define DRV_VERSION "1.07" |
| |
| /* Includes */ |
| #include <linux/module.h> /* For module specific items */ |
| #include <linux/moduleparam.h> /* For new moduleparam's */ |
| #include <linux/types.h> /* For standard types (like size_t) */ |
| #include <linux/errno.h> /* For the -ENODEV/... values */ |
| #include <linux/kernel.h> /* For printk/panic/... */ |
| #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV |
| (WATCHDOG_MINOR) */ |
| #include <linux/watchdog.h> /* For the watchdog specific items */ |
| #include <linux/init.h> /* For __init/__exit/... */ |
| #include <linux/fs.h> /* For file operations */ |
| #include <linux/platform_device.h> /* For platform_driver framework */ |
| #include <linux/pci.h> /* For pci functions */ |
| #include <linux/ioport.h> /* For io-port access */ |
| #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ |
| #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ |
| #include <linux/io.h> /* For inb/outb/... */ |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/lpc_ich.h> |
| |
| #include "iTCO_vendor.h" |
| |
| /* Address definitions for the TCO */ |
| /* TCO base address */ |
| #define TCOBASE (iTCO_wdt_private.tco_res->start) |
| /* SMI Control and Enable Register */ |
| #define SMI_EN (iTCO_wdt_private.smi_res->start) |
| |
| #define TCO_RLD (TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */ |
| #define TCOv1_TMR (TCOBASE + 0x01) /* TCOv1 Timer Initial Value */ |
| #define TCO_DAT_IN (TCOBASE + 0x02) /* TCO Data In Register */ |
| #define TCO_DAT_OUT (TCOBASE + 0x03) /* TCO Data Out Register */ |
| #define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */ |
| #define TCO2_STS (TCOBASE + 0x06) /* TCO2 Status Register */ |
| #define TCO1_CNT (TCOBASE + 0x08) /* TCO1 Control Register */ |
| #define TCO2_CNT (TCOBASE + 0x0a) /* TCO2 Control Register */ |
| #define TCOv2_TMR (TCOBASE + 0x12) /* TCOv2 Timer Initial Value */ |
| |
| /* internal variables */ |
| static unsigned long is_active; |
| static char expect_release; |
| static struct { /* this is private data for the iTCO_wdt device */ |
| /* TCO version/generation */ |
| unsigned int iTCO_version; |
| struct resource *tco_res; |
| struct resource *smi_res; |
| struct resource *gcs_res; |
| /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/ |
| unsigned long __iomem *gcs; |
| /* the lock for io operations */ |
| spinlock_t io_lock; |
| struct platform_device *dev; |
| /* the PCI-device */ |
| struct pci_dev *pdev; |
| } iTCO_wdt_private; |
| |
| /* module parameters */ |
| #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ |
| static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " |
| "5..76 (TCO v1) or 3..614 (TCO v2), default=" |
| __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static int turn_SMI_watchdog_clear_off = 1; |
| module_param(turn_SMI_watchdog_clear_off, int, 0); |
| MODULE_PARM_DESC(turn_SMI_watchdog_clear_off, |
| "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)"); |
| |
| /* |
| * Some TCO specific functions |
| */ |
| |
| static inline unsigned int seconds_to_ticks(int seconds) |
| { |
| /* the internal timer is stored as ticks which decrement |
| * every 0.6 seconds */ |
| return (seconds * 10) / 6; |
| } |
| |
| static void iTCO_wdt_set_NO_REBOOT_bit(void) |
| { |
| u32 val32; |
| |
| /* Set the NO_REBOOT bit: this disables reboots */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| val32 = readl(iTCO_wdt_private.gcs); |
| val32 |= 0x00000020; |
| writel(val32, iTCO_wdt_private.gcs); |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| val32 |= 0x00000002; |
| pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32); |
| } |
| } |
| |
| static int iTCO_wdt_unset_NO_REBOOT_bit(void) |
| { |
| int ret = 0; |
| u32 val32; |
| |
| /* Unset the NO_REBOOT bit: this enables reboots */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| val32 = readl(iTCO_wdt_private.gcs); |
| val32 &= 0xffffffdf; |
| writel(val32, iTCO_wdt_private.gcs); |
| |
| val32 = readl(iTCO_wdt_private.gcs); |
| if (val32 & 0x00000020) |
| ret = -EIO; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| val32 &= 0xfffffffd; |
| pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32); |
| |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| if (val32 & 0x00000002) |
| ret = -EIO; |
| } |
| |
| return ret; /* returns: 0 = OK, -EIO = Error */ |
| } |
| |
| static int iTCO_wdt_start(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_start(iTCO_wdt_private.smi_res, heartbeat); |
| |
| /* disable chipset's NO_REBOOT bit */ |
| if (iTCO_wdt_unset_NO_REBOOT_bit()) { |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); |
| return -EIO; |
| } |
| |
| /* Force the timer to its reload value by writing to the TCO_RLD |
| register */ |
| if (iTCO_wdt_private.iTCO_version == 2) |
| outw(0x01, TCO_RLD); |
| else if (iTCO_wdt_private.iTCO_version == 1) |
| outb(0x01, TCO_RLD); |
| |
| /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ |
| val = inw(TCO1_CNT); |
| val &= 0xf7ff; |
| outw(val, TCO1_CNT); |
| val = inw(TCO1_CNT); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if (val & 0x0800) |
| return -1; |
| return 0; |
| } |
| |
| static int iTCO_wdt_stop(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_stop(iTCO_wdt_private.smi_res); |
| |
| /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ |
| val = inw(TCO1_CNT); |
| val |= 0x0800; |
| outw(val, TCO1_CNT); |
| val = inw(TCO1_CNT); |
| |
| /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
| iTCO_wdt_set_NO_REBOOT_bit(); |
| |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val & 0x0800) == 0) |
| return -1; |
| return 0; |
| } |
| |
| static int iTCO_wdt_keepalive(void) |
| { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, heartbeat); |
| |
| /* Reload the timer by writing to the TCO Timer Counter register */ |
| if (iTCO_wdt_private.iTCO_version == 2) |
| outw(0x01, TCO_RLD); |
| else if (iTCO_wdt_private.iTCO_version == 1) { |
| /* Reset the timeout status bit so that the timer |
| * needs to count down twice again before rebooting */ |
| outw(0x0008, TCO1_STS); /* write 1 to clear bit */ |
| |
| outb(0x01, TCO_RLD); |
| } |
| |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| return 0; |
| } |
| |
| static int iTCO_wdt_set_heartbeat(int t) |
| { |
| unsigned int val16; |
| unsigned char val8; |
| unsigned int tmrval; |
| |
| tmrval = seconds_to_ticks(t); |
| |
| /* For TCO v1 the timer counts down twice before rebooting */ |
| if (iTCO_wdt_private.iTCO_version == 1) |
| tmrval /= 2; |
| |
| /* from the specs: */ |
| /* "Values of 0h-3h are ignored and should not be attempted" */ |
| if (tmrval < 0x04) |
| return -EINVAL; |
| if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) || |
| ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) |
| return -EINVAL; |
| |
| iTCO_vendor_pre_set_heartbeat(tmrval); |
| |
| /* Write new heartbeat to watchdog */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val16 = inw(TCOv2_TMR); |
| val16 &= 0xfc00; |
| val16 |= tmrval; |
| outw(val16, TCOv2_TMR); |
| val16 = inw(TCOv2_TMR); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val16 & 0x3ff) != tmrval) |
| return -EINVAL; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val8 = inb(TCOv1_TMR); |
| val8 &= 0xc0; |
| val8 |= (tmrval & 0xff); |
| outb(val8, TCOv1_TMR); |
| val8 = inb(TCOv1_TMR); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val8 & 0x3f) != tmrval) |
| return -EINVAL; |
| } |
| |
| heartbeat = t; |
| return 0; |
| } |
| |
| static int iTCO_wdt_get_timeleft(int *time_left) |
| { |
| unsigned int val16; |
| unsigned char val8; |
| |
| /* read the TCO Timer */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val16 = inw(TCO_RLD); |
| val16 &= 0x3ff; |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| *time_left = (val16 * 6) / 10; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val8 = inb(TCO_RLD); |
| val8 &= 0x3f; |
| if (!(inw(TCO1_STS) & 0x0008)) |
| val8 += (inb(TCOv1_TMR) & 0x3f); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| *time_left = (val8 * 6) / 10; |
| } else |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static int iTCO_wdt_open(struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &is_active)) |
| return -EBUSY; |
| |
| /* |
| * Reload and activate timer |
| */ |
| iTCO_wdt_start(); |
| return nonseekable_open(inode, file); |
| } |
| |
| static int iTCO_wdt_release(struct inode *inode, struct file *file) |
| { |
| /* |
| * Shut off the timer. |
| */ |
| if (expect_release == 42) { |
| iTCO_wdt_stop(); |
| } else { |
| pr_crit("Unexpected close, not stopping watchdog!\n"); |
| iTCO_wdt_keepalive(); |
| } |
| clear_bit(0, &is_active); |
| expect_release = 0; |
| return 0; |
| } |
| |
| static ssize_t iTCO_wdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* note: just in case someone wrote the magic |
| character five months ago... */ |
| expect_release = 0; |
| |
| /* scan to see whether or not we got the |
| magic character */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_release = 42; |
| } |
| } |
| |
| /* someone wrote to us, we should reload the timer */ |
| iTCO_wdt_keepalive(); |
| } |
| return len; |
| } |
| |
| static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int new_options, retval = -EINVAL; |
| int new_heartbeat; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .firmware_version = 0, |
| .identity = DRV_NAME, |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_SETOPTIONS: |
| { |
| if (get_user(new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| iTCO_wdt_stop(); |
| retval = 0; |
| } |
| if (new_options & WDIOS_ENABLECARD) { |
| iTCO_wdt_keepalive(); |
| iTCO_wdt_start(); |
| retval = 0; |
| } |
| return retval; |
| } |
| case WDIOC_KEEPALIVE: |
| iTCO_wdt_keepalive(); |
| return 0; |
| |
| case WDIOC_SETTIMEOUT: |
| { |
| if (get_user(new_heartbeat, p)) |
| return -EFAULT; |
| if (iTCO_wdt_set_heartbeat(new_heartbeat)) |
| return -EINVAL; |
| iTCO_wdt_keepalive(); |
| /* Fall */ |
| } |
| case WDIOC_GETTIMEOUT: |
| return put_user(heartbeat, p); |
| case WDIOC_GETTIMELEFT: |
| { |
| int time_left; |
| if (iTCO_wdt_get_timeleft(&time_left)) |
| return -EINVAL; |
| return put_user(time_left, p); |
| } |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static const struct file_operations iTCO_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = iTCO_wdt_write, |
| .unlocked_ioctl = iTCO_wdt_ioctl, |
| .open = iTCO_wdt_open, |
| .release = iTCO_wdt_release, |
| }; |
| |
| static struct miscdevice iTCO_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &iTCO_wdt_fops, |
| }; |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static void __devexit iTCO_wdt_cleanup(void) |
| { |
| /* Stop the timer before we leave */ |
| if (!nowayout) |
| iTCO_wdt_stop(); |
| |
| /* Deregister */ |
| misc_deregister(&iTCO_wdt_miscdev); |
| |
| /* release resources */ |
| release_region(iTCO_wdt_private.tco_res->start, |
| resource_size(iTCO_wdt_private.tco_res)); |
| release_region(iTCO_wdt_private.smi_res->start, |
| resource_size(iTCO_wdt_private.smi_res)); |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| iounmap(iTCO_wdt_private.gcs); |
| release_mem_region(iTCO_wdt_private.gcs_res->start, |
| resource_size(iTCO_wdt_private.gcs_res)); |
| } |
| |
| iTCO_wdt_private.tco_res = NULL; |
| iTCO_wdt_private.smi_res = NULL; |
| iTCO_wdt_private.gcs_res = NULL; |
| iTCO_wdt_private.gcs = NULL; |
| } |
| |
| static int __devinit iTCO_wdt_probe(struct platform_device *dev) |
| { |
| int ret = -ENODEV; |
| unsigned long val32; |
| struct lpc_ich_info *ich_info = dev->dev.platform_data; |
| |
| if (!ich_info) |
| goto out; |
| |
| spin_lock_init(&iTCO_wdt_private.io_lock); |
| |
| iTCO_wdt_private.tco_res = |
| platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_TCO); |
| if (!iTCO_wdt_private.tco_res) |
| goto out; |
| |
| iTCO_wdt_private.smi_res = |
| platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_SMI); |
| if (!iTCO_wdt_private.smi_res) |
| goto out; |
| |
| iTCO_wdt_private.iTCO_version = ich_info->iTCO_version; |
| iTCO_wdt_private.dev = dev; |
| iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent); |
| |
| /* |
| * Get the Memory-Mapped GCS register, we need it for the |
| * NO_REBOOT flag (TCO v2). |
| */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| iTCO_wdt_private.gcs_res = platform_get_resource(dev, |
| IORESOURCE_MEM, |
| ICH_RES_MEM_GCS); |
| |
| if (!iTCO_wdt_private.gcs_res) |
| goto out; |
| |
| if (!request_mem_region(iTCO_wdt_private.gcs_res->start, |
| resource_size(iTCO_wdt_private.gcs_res), dev->name)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| iTCO_wdt_private.gcs = ioremap(iTCO_wdt_private.gcs_res->start, |
| resource_size(iTCO_wdt_private.gcs_res)); |
| if (!iTCO_wdt_private.gcs) { |
| ret = -EIO; |
| goto unreg_gcs; |
| } |
| } |
| |
| /* Check chipset's NO_REBOOT bit */ |
| if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { |
| pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); |
| ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ |
| goto unmap_gcs; |
| } |
| |
| /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
| iTCO_wdt_set_NO_REBOOT_bit(); |
| |
| /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ |
| if (!request_region(iTCO_wdt_private.smi_res->start, |
| resource_size(iTCO_wdt_private.smi_res), dev->name)) { |
| pr_err("I/O address 0x%04llx already in use, device disabled\n", |
| (u64)SMI_EN); |
| ret = -EBUSY; |
| goto unmap_gcs; |
| } |
| if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) { |
| /* |
| * Bit 13: TCO_EN -> 0 |
| * Disables TCO logic generating an SMI# |
| */ |
| val32 = inl(SMI_EN); |
| val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ |
| outl(val32, SMI_EN); |
| } |
| |
| if (!request_region(iTCO_wdt_private.tco_res->start, |
| resource_size(iTCO_wdt_private.tco_res), dev->name)) { |
| pr_err("I/O address 0x%04llx already in use, device disabled\n", |
| (u64)TCOBASE); |
| ret = -EBUSY; |
| goto unreg_smi; |
| } |
| |
| pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n", |
| ich_info->name, ich_info->iTCO_version, (u64)TCOBASE); |
| |
| /* Clear out the (probably old) status */ |
| outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */ |
| outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */ |
| outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */ |
| |
| /* Make sure the watchdog is not running */ |
| iTCO_wdt_stop(); |
| |
| /* Check that the heartbeat value is within it's range; |
| if not reset to the default */ |
| if (iTCO_wdt_set_heartbeat(heartbeat)) { |
| iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); |
| pr_info("timeout value out of range, using %d\n", heartbeat); |
| } |
| |
| ret = misc_register(&iTCO_wdt_miscdev); |
| if (ret != 0) { |
| pr_err("cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto unreg_tco; |
| } |
| |
| pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", |
| heartbeat, nowayout); |
| |
| return 0; |
| |
| unreg_tco: |
| release_region(iTCO_wdt_private.tco_res->start, |
| resource_size(iTCO_wdt_private.tco_res)); |
| unreg_smi: |
| release_region(iTCO_wdt_private.smi_res->start, |
| resource_size(iTCO_wdt_private.smi_res)); |
| unmap_gcs: |
| if (iTCO_wdt_private.iTCO_version == 2) |
| iounmap(iTCO_wdt_private.gcs); |
| unreg_gcs: |
| if (iTCO_wdt_private.iTCO_version == 2) |
| release_mem_region(iTCO_wdt_private.gcs_res->start, |
| resource_size(iTCO_wdt_private.gcs_res)); |
| out: |
| iTCO_wdt_private.tco_res = NULL; |
| iTCO_wdt_private.smi_res = NULL; |
| iTCO_wdt_private.gcs_res = NULL; |
| iTCO_wdt_private.gcs = NULL; |
| |
| return ret; |
| } |
| |
| static int __devexit iTCO_wdt_remove(struct platform_device *dev) |
| { |
| if (iTCO_wdt_private.tco_res || iTCO_wdt_private.smi_res) |
| iTCO_wdt_cleanup(); |
| |
| return 0; |
| } |
| |
| static void iTCO_wdt_shutdown(struct platform_device *dev) |
| { |
| iTCO_wdt_stop(); |
| } |
| |
| static struct platform_driver iTCO_wdt_driver = { |
| .probe = iTCO_wdt_probe, |
| .remove = __devexit_p(iTCO_wdt_remove), |
| .shutdown = iTCO_wdt_shutdown, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| static int __init iTCO_wdt_init_module(void) |
| { |
| int err; |
| |
| pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); |
| |
| err = platform_driver_register(&iTCO_wdt_driver); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static void __exit iTCO_wdt_cleanup_module(void) |
| { |
| platform_driver_unregister(&iTCO_wdt_driver); |
| pr_info("Watchdog Module Unloaded\n"); |
| } |
| |
| module_init(iTCO_wdt_init_module); |
| module_exit(iTCO_wdt_cleanup_module); |
| |
| MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); |
| MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |