| /* |
| * arch/arm/mach-at91/at91sam9260.c |
| * |
| * Copyright (C) 2006 SAN People |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <asm/proc-fns.h> |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/system_misc.h> |
| #include <mach/cpu.h> |
| #include <mach/at91_dbgu.h> |
| #include <mach/at91sam9260.h> |
| #include <mach/at91_pmc.h> |
| |
| #include "at91_aic.h" |
| #include "at91_rstc.h" |
| #include "soc.h" |
| #include "generic.h" |
| #include "clock.h" |
| #include "sam9_smc.h" |
| #include "pm.h" |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk pioA_clk = { |
| .name = "pioA_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_PIOA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioB_clk = { |
| .name = "pioB_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_PIOB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioC_clk = { |
| .name = "pioC_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_PIOC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk adc_clk = { |
| .name = "adc_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_ADC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk adc_op_clk = { |
| .name = "adc_op_clk", |
| .type = CLK_TYPE_PERIPHERAL, |
| .rate_hz = 5000000, |
| }; |
| |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc_clk = { |
| .name = "mci_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_MCI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk udc_clk = { |
| .name = "udc_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_UDP, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi_clk = { |
| .name = "twi_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TWI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi0_clk = { |
| .name = "spi0_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_SPI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi1_clk = { |
| .name = "spi1_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_SPI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc_clk = { |
| .name = "ssc_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_SSC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc0_clk = { |
| .name = "tc0_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc1_clk = { |
| .name = "tc1_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc2_clk = { |
| .name = "tc2_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ohci_clk = { |
| .name = "ohci_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_UHP, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk macb_clk = { |
| .name = "pclk", |
| .pmc_mask = 1 << AT91SAM9260_ID_EMAC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk isi_clk = { |
| .name = "isi_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_ISI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart3_clk = { |
| .name = "usart3_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart4_clk = { |
| .name = "usart4_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US4, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart5_clk = { |
| .name = "usart5_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_US5, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc3_clk = { |
| .name = "tc3_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc4_clk = { |
| .name = "tc4_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC4, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tc5_clk = { |
| .name = "tc5_clk", |
| .pmc_mask = 1 << AT91SAM9260_ID_TC5, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioA_clk, |
| &pioB_clk, |
| &pioC_clk, |
| &adc_clk, |
| &adc_op_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &mmc_clk, |
| &udc_clk, |
| &twi_clk, |
| &spi0_clk, |
| &spi1_clk, |
| &ssc_clk, |
| &tc0_clk, |
| &tc1_clk, |
| &tc2_clk, |
| &ohci_clk, |
| &macb_clk, |
| &isi_clk, |
| &usart3_clk, |
| &usart4_clk, |
| &usart5_clk, |
| &tc3_clk, |
| &tc4_clk, |
| &tc5_clk, |
| // irq0 .. irq2 |
| }; |
| |
| static struct clk_lookup periph_clocks_lookups[] = { |
| /* One additional fake clock for macb_hclk */ |
| CLKDEV_CON_ID("hclk", &macb_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), |
| CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk), |
| CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk), |
| CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), |
| CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), |
| /* more usart lookup table for DT entries */ |
| CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), |
| CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), |
| CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk), |
| CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk), |
| CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), |
| CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), |
| CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), |
| CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), |
| /* more tc lookup table for DT entries */ |
| CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), |
| CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), |
| CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), |
| CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), |
| CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), |
| /* fake hclk clock */ |
| CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), |
| CLKDEV_CON_ID("pioA", &pioA_clk), |
| CLKDEV_CON_ID("pioB", &pioB_clk), |
| CLKDEV_CON_ID("pioC", &pioC_clk), |
| CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), |
| CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), |
| CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), |
| }; |
| |
| static struct clk_lookup usart_clocks_lookups[] = { |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), |
| }; |
| |
| /* |
| * The two programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| |
| static void __init at91sam9260_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clkdev_add_table(periph_clocks_lookups, |
| ARRAY_SIZE(periph_clocks_lookups)); |
| clkdev_add_table(usart_clocks_lookups, |
| ARRAY_SIZE(usart_clocks_lookups)); |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * GPIO |
| * -------------------------------------------------------------------- */ |
| |
| static struct at91_gpio_bank at91sam9260_gpio[] __initdata = { |
| { |
| .id = AT91SAM9260_ID_PIOA, |
| .regbase = AT91SAM9260_BASE_PIOA, |
| }, { |
| .id = AT91SAM9260_ID_PIOB, |
| .regbase = AT91SAM9260_BASE_PIOB, |
| }, { |
| .id = AT91SAM9260_ID_PIOC, |
| .regbase = AT91SAM9260_BASE_PIOC, |
| } |
| }; |
| |
| /* -------------------------------------------------------------------- |
| * AT91SAM9260 processor initialization |
| * -------------------------------------------------------------------- */ |
| |
| static void __init at91sam9xe_map_io(void) |
| { |
| unsigned long sram_size; |
| |
| switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { |
| case AT91_CIDR_SRAMSIZ_32K: |
| sram_size = 2 * SZ_16K; |
| break; |
| case AT91_CIDR_SRAMSIZ_16K: |
| default: |
| sram_size = SZ_16K; |
| } |
| |
| at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size); |
| } |
| |
| static void __init at91sam9260_map_io(void) |
| { |
| if (cpu_is_at91sam9xe()) |
| at91sam9xe_map_io(); |
| else if (cpu_is_at91sam9g20()) |
| at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE); |
| else |
| at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); |
| } |
| |
| static void __init at91sam9260_ioremap_registers(void) |
| { |
| at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); |
| at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); |
| at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); |
| at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); |
| at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); |
| at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); |
| at91_pm_set_standby(at91sam9_sdram_standby); |
| } |
| |
| static void __init at91sam9260_initialize(void) |
| { |
| arm_pm_idle = at91sam9_idle; |
| arm_pm_restart = at91sam9_alt_restart; |
| |
| at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); |
| |
| /* Register GPIO subsystem */ |
| at91_gpio_init(at91sam9260_gpio, 3); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A */ |
| 1, /* Parallel IO Controller B */ |
| 1, /* Parallel IO Controller C */ |
| 0, /* Analog-to-Digital Converter */ |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 0, /* Multimedia Card Interface */ |
| 2, /* USB Device Port */ |
| 6, /* Two-Wire Interface */ |
| 5, /* Serial Peripheral Interface 0 */ |
| 5, /* Serial Peripheral Interface 1 */ |
| 5, /* Serial Synchronous Controller */ |
| 0, |
| 0, |
| 0, /* Timer Counter 0 */ |
| 0, /* Timer Counter 1 */ |
| 0, /* Timer Counter 2 */ |
| 2, /* USB Host port */ |
| 3, /* Ethernet */ |
| 0, /* Image Sensor Interface */ |
| 5, /* USART 3 */ |
| 5, /* USART 4 */ |
| 5, /* USART 5 */ |
| 0, /* Timer Counter 3 */ |
| 0, /* Timer Counter 4 */ |
| 0, /* Timer Counter 5 */ |
| 0, /* Advanced Interrupt Controller */ |
| 0, /* Advanced Interrupt Controller */ |
| 0, /* Advanced Interrupt Controller */ |
| }; |
| |
| AT91_SOC_START(at91sam9260) |
| .map_io = at91sam9260_map_io, |
| .default_irq_priority = at91sam9260_default_irq_priority, |
| .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) |
| | (1 << AT91SAM9260_ID_IRQ2), |
| .ioremap_registers = at91sam9260_ioremap_registers, |
| .register_clocks = at91sam9260_register_clocks, |
| .init = at91sam9260_initialize, |
| AT91_SOC_END |