| /dts-v1/; |
| |
| /include/ "kirkwood.dtsi" |
| /include/ "kirkwood-6281.dtsi" |
| |
| / { |
| model = "ZyXEL NSA310"; |
| compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| |
| ocp@f1000000 { |
| pinctrl: pinctrl@10000 { |
| pinctrl-0 = <&pmx_unknown>; |
| pinctrl-names = "default"; |
| |
| pmx_led_esata_green: pmx-led-esata-green { |
| marvell,pins = "mpp12"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_esata_red: pmx-led-esata-red { |
| marvell,pins = "mpp13"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_usb_green: pmx-led-usb-green { |
| marvell,pins = "mpp15"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_usb_red: pmx-led-usb-red { |
| marvell,pins = "mpp16"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_usb_power_off: pmx-usb-power-off { |
| marvell,pins = "mpp21"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_green: pmx-led-sys-green { |
| marvell,pins = "mpp28"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_red: pmx-led-sys-red { |
| marvell,pins = "mpp29"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_reset: pmx-btn-reset { |
| marvell,pins = "mpp36"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_copy: pmx-btn-copy { |
| marvell,pins = "mpp37"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_green: pmx-led-copy-green { |
| marvell,pins = "mpp39"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_red: pmx-led-copy-red { |
| marvell,pins = "mpp40"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd_green: pmx-led-hdd-green { |
| marvell,pins = "mpp41"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd_red: pmx-led-hdd-red { |
| marvell,pins = "mpp42"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_unknown: pmx-unknown { |
| marvell,pins = "mpp44"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_power: pmx-btn-power { |
| marvell,pins = "mpp46"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_pwr_off: pmx-pwr-off { |
| marvell,pins = "mpp48"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| serial@12000 { |
| status = "ok"; |
| }; |
| |
| sata@80000 { |
| status = "okay"; |
| nr-ports = <2>; |
| }; |
| |
| i2c@11000 { |
| status = "okay"; |
| |
| adt7476: adt7476a@2e { |
| compatible = "adt7476"; |
| reg = <0x2e>; |
| }; |
| }; |
| |
| nand@3000000 { |
| status = "okay"; |
| chip-delay = <35>; |
| |
| partition@0 { |
| label = "uboot"; |
| reg = <0x0000000 0x0100000>; |
| read-only; |
| }; |
| partition@100000 { |
| label = "uboot_env"; |
| reg = <0x0100000 0x0080000>; |
| }; |
| partition@180000 { |
| label = "key_store"; |
| reg = <0x0180000 0x0080000>; |
| }; |
| partition@200000 { |
| label = "info"; |
| reg = <0x0200000 0x0080000>; |
| }; |
| partition@280000 { |
| label = "etc"; |
| reg = <0x0280000 0x0a00000>; |
| }; |
| partition@c80000 { |
| label = "kernel_1"; |
| reg = <0x0c80000 0x0a00000>; |
| }; |
| partition@1680000 { |
| label = "rootfs1"; |
| reg = <0x1680000 0x2fc0000>; |
| }; |
| partition@4640000 { |
| label = "kernel_2"; |
| reg = <0x4640000 0x0a00000>; |
| }; |
| partition@5040000 { |
| label = "rootfs2"; |
| reg = <0x5040000 0x2fc0000>; |
| }; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; |
| pinctrl-names = "default"; |
| |
| button@1 { |
| label = "Power Button"; |
| linux,code = <116>; |
| gpios = <&gpio1 14 0>; |
| }; |
| button@2 { |
| label = "Copy Button"; |
| linux,code = <133>; |
| gpios = <&gpio1 5 1>; |
| }; |
| button@3 { |
| label = "Reset Button"; |
| linux,code = <0x198>; |
| gpios = <&gpio1 4 1>; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red |
| &pmx_led_usb_green &pmx_led_usb_red |
| &pmx_led_sys_green &pmx_led_sys_red |
| &pmx_led_copy_green &pmx_led_copy_red |
| &pmx_led_hdd_green &pmx_led_hdd_red>; |
| pinctrl-names = "default"; |
| |
| green-sys { |
| label = "nsa310:green:sys"; |
| gpios = <&gpio0 28 0>; |
| }; |
| red-sys { |
| label = "nsa310:red:sys"; |
| gpios = <&gpio0 29 0>; |
| }; |
| green-hdd { |
| label = "nsa310:green:hdd"; |
| gpios = <&gpio1 9 0>; |
| }; |
| red-hdd { |
| label = "nsa310:red:hdd"; |
| gpios = <&gpio1 10 0>; |
| }; |
| green-esata { |
| label = "nsa310:green:esata"; |
| gpios = <&gpio0 12 0>; |
| }; |
| red-esata { |
| label = "nsa310:red:esata"; |
| gpios = <&gpio0 13 0>; |
| }; |
| green-usb { |
| label = "nsa310:green:usb"; |
| gpios = <&gpio0 15 0>; |
| }; |
| red-usb { |
| label = "nsa310:red:usb"; |
| gpios = <&gpio0 16 0>; |
| }; |
| green-copy { |
| label = "nsa310:green:copy"; |
| gpios = <&gpio1 7 0>; |
| }; |
| red-copy { |
| label = "nsa310:red:copy"; |
| gpios = <&gpio1 8 0>; |
| }; |
| }; |
| |
| gpio_poweroff { |
| compatible = "gpio-poweroff"; |
| pinctrl-0 = <&pmx_pwr_off>; |
| pinctrl-names = "default"; |
| gpios = <&gpio1 16 0>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_usb_power_off>; |
| pinctrl-names = "default"; |
| |
| usb0_power_off: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "USB Power Off"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| gpio = <&gpio0 21 0>; |
| }; |
| }; |
| }; |