ixgbe: limit setting speed to only one at a time for QSFP modules
QSFP+ modules do not support auto negotiation and should advertise only
one speed at a time.
This patch adds logic in ethtool to allow setting and reporting the
advertised speed at either 1Gbps or 10Gbps, but not both. Also limits
the speed set in ixgbe_sfp_link_config_subtask() to highest supported.
Previously the link was set to whatever the supported speeds were.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 08efc253..b41db3b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -186,6 +186,11 @@
ecmd->advertising |= ADVERTISED_1000baseT_Full;
if (supported_link & IXGBE_LINK_SPEED_100_FULL)
ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+ if (hw->phy.multispeed_fiber && !autoneg) {
+ if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+ ecmd->advertising = ADVERTISED_10000baseT_Full;
+ }
}
if (autoneg) {
@@ -314,6 +319,14 @@
if (ecmd->advertising & ~ecmd->supported)
return -EINVAL;
+ /* only allow one speed at a time if no autoneg */
+ if (!ecmd->autoneg && hw->phy.multispeed_fiber) {
+ if (ecmd->advertising ==
+ (ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full))
+ return -EINVAL;
+ }
+
old = hw->phy.autoneg_advertised;
advertised = 0;
if (ecmd->advertising & ADVERTISED_10000baseT_Full)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index ae26786..0ade0cd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6000,8 +6000,16 @@
adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
speed = hw->phy.autoneg_advertised;
- if ((!speed) && (hw->mac.ops.get_link_capabilities))
+ if ((!speed) && (hw->mac.ops.get_link_capabilities)) {
hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg);
+
+ /* setup the highest link when no autoneg */
+ if (!autoneg) {
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ speed = IXGBE_LINK_SPEED_10GB_FULL;
+ }
+ }
+
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, speed, true);