wil6210: fw error recovery
upon fw error interrupt - in STA mode, disconnect/cancel scan and
then reset FW/HW
added module param - no_fw_recovery which is false by default
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 848ed85..f6a12e7 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -265,6 +265,7 @@
u16 chnl[4];
} __packed cmd;
uint i, n;
+ int rc;
if (wil->scan_request) {
wil_err(wil, "Already scanning\n");
@@ -305,8 +306,13 @@
request->channels[i]->center_freq);
}
- return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
+ rc = wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
+
+ if (rc)
+ wil->scan_request = NULL;
+
+ return rc;
}
static int wil_cfg80211_connect(struct wiphy *wiphy,
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 201cf06..5824cd4 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -328,6 +328,7 @@
if (isr & ISR_MISC_FW_ERROR) {
wil_notify_fw_error(wil);
isr &= ~ISR_MISC_FW_ERROR;
+ wil_fw_error_recovery(wil);
}
if (isr & ISR_MISC_MBOX_EVT) {
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0831d4c..32ac1b9 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -21,6 +21,10 @@
#include "wil6210.h"
#include "txrx.h"
+static bool no_fw_recovery;
+module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(no_fw_recovery, " disable FW error recovery");
+
/*
* Due to a hardware issue,
* one has to read/write to/from NIC in 32-bit chunks;
@@ -144,6 +148,36 @@
schedule_work(&wil->disconnect_worker);
}
+static void wil_fw_error_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work,
+ struct wil6210_priv, fw_error_worker);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wil_dbg_misc(wil, "fw error worker\n");
+
+ if (no_fw_recovery)
+ return;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_MONITOR:
+ wil_info(wil, "fw error recovery started...\n");
+ wil_reset(wil);
+
+ /* need to re-allocate Rx ring after reset */
+ wil_rx_init(wil);
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ /* recovery in these modes is done by upper layers */
+ break;
+ default:
+ break;
+ }
+}
+
static int wil_find_free_vring(struct wil6210_priv *wil)
{
int i;
@@ -196,6 +230,7 @@
INIT_WORK(&wil->connect_worker, wil_connect_worker);
INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
+ INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
INIT_LIST_HEAD(&wil->pending_wmi_ev);
spin_lock_init(&wil->wmi_ev_lock);
@@ -222,6 +257,7 @@
void wil_priv_deinit(struct wil6210_priv *wil)
{
cancel_work_sync(&wil->disconnect_worker);
+ cancel_work_sync(&wil->fw_error_worker);
wil6210_disconnect(wil, NULL);
wmi_event_flush(wil);
destroy_workqueue(wil->wmi_wq_conn);
@@ -335,6 +371,13 @@
napi_synchronize(&wil->napi_tx);
}
+ if (wil->scan_request) {
+ wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
+ wil->scan_request);
+ cfg80211_scan_done(wil->scan_request, true);
+ wil->scan_request = NULL;
+ }
+
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL);
@@ -363,6 +406,11 @@
return rc;
}
+void wil_fw_error_recovery(struct wil6210_priv *wil)
+{
+ wil_dbg_misc(wil, "starting fw error recovery\n");
+ schedule_work(&wil->fw_error_worker);
+}
void wil_link_on(struct wil6210_priv *wil)
{
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 89cbdc3..80573f7 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -370,6 +370,7 @@
struct workqueue_struct *wmi_wq_conn; /* for connect worker */
struct work_struct connect_worker;
struct work_struct disconnect_worker;
+ struct work_struct fw_error_worker; /* for FW error recovery */
struct timer_list connect_timer;
int pending_connect_cid;
struct list_head pending_wmi_ev;
@@ -447,6 +448,7 @@
int wil_priv_init(struct wil6210_priv *wil);
void wil_priv_deinit(struct wil6210_priv *wil);
int wil_reset(struct wil6210_priv *wil);
+void wil_fw_error_recovery(struct wil6210_priv *wil);
void wil_link_on(struct wil6210_priv *wil);
void wil_link_off(struct wil6210_priv *wil);
int wil_up(struct wil6210_priv *wil);