| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/sched.h> |
| #include <net/mac80211.h> |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-sta.h" |
| #include "iwl-io.h" |
| #include "iwl-helpers.h" |
| |
| /* |
| * mac80211 queues, ACs, hardware queues, FIFOs. |
| * |
| * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues |
| * |
| * Mac80211 uses the following numbers, which we get as from it |
| * by way of skb_get_queue_mapping(skb): |
| * |
| * VO 0 |
| * VI 1 |
| * BE 2 |
| * BK 3 |
| * |
| * |
| * Regular (not A-MPDU) frames are put into hardware queues corresponding |
| * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their |
| * own queue per aggregation session (RA/TID combination), such queues are |
| * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In |
| * order to map frames to the right queue, we also need an AC->hw queue |
| * mapping. This is implemented here. |
| * |
| * Due to the way hw queues are set up (by the hw specific modules like |
| * iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity |
| * mapping. |
| */ |
| |
| static const u8 tid_to_ac[] = { |
| /* this matches the mac80211 numbers */ |
| 2, 3, 3, 2, 1, 1, 0, 0 |
| }; |
| |
| static const u8 ac_to_fifo[] = { |
| IWL_TX_FIFO_VO, |
| IWL_TX_FIFO_VI, |
| IWL_TX_FIFO_BE, |
| IWL_TX_FIFO_BK, |
| }; |
| |
| static inline int get_fifo_from_ac(u8 ac) |
| { |
| return ac_to_fifo[ac]; |
| } |
| |
| static inline int get_queue_from_ac(u16 ac) |
| { |
| return ac; |
| } |
| |
| static inline int get_fifo_from_tid(u16 tid) |
| { |
| if (likely(tid < ARRAY_SIZE(tid_to_ac))) |
| return get_fifo_from_ac(tid_to_ac[tid]); |
| |
| /* no support for TIDs 8-15 yet */ |
| return -EINVAL; |
| } |
| |
| static inline int iwl_alloc_dma_ptr(struct iwl_priv *priv, |
| struct iwl_dma_ptr *ptr, size_t size) |
| { |
| ptr->addr = dma_alloc_coherent(&priv->pci_dev->dev, size, &ptr->dma, |
| GFP_KERNEL); |
| if (!ptr->addr) |
| return -ENOMEM; |
| ptr->size = size; |
| return 0; |
| } |
| |
| static inline void iwl_free_dma_ptr(struct iwl_priv *priv, |
| struct iwl_dma_ptr *ptr) |
| { |
| if (unlikely(!ptr->addr)) |
| return; |
| |
| dma_free_coherent(&priv->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); |
| memset(ptr, 0, sizeof(*ptr)); |
| } |
| |
| /** |
| * iwl_txq_update_write_ptr - Send new write index to hardware |
| */ |
| void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) |
| { |
| u32 reg = 0; |
| int txq_id = txq->q.id; |
| |
| if (txq->need_update == 0) |
| return; |
| |
| /* if we're trying to save power */ |
| if (test_bit(STATUS_POWER_PMI, &priv->status)) { |
| /* wake up nic if it's powered down ... |
| * uCode will wake up, and interrupt us again, so next |
| * time we'll skip this part. */ |
| reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); |
| |
| if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { |
| IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n", |
| txq_id, reg); |
| iwl_set_bit(priv, CSR_GP_CNTRL, |
| CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); |
| return; |
| } |
| |
| iwl_write_direct32(priv, HBUS_TARG_WRPTR, |
| txq->q.write_ptr | (txq_id << 8)); |
| |
| /* else not in power-save mode, uCode will never sleep when we're |
| * trying to tx (during RFKILL, we're not trying to tx). */ |
| } else |
| iwl_write32(priv, HBUS_TARG_WRPTR, |
| txq->q.write_ptr | (txq_id << 8)); |
| |
| txq->need_update = 0; |
| } |
| EXPORT_SYMBOL(iwl_txq_update_write_ptr); |
| |
| |
| void iwl_free_tfds_in_queue(struct iwl_priv *priv, |
| int sta_id, int tid, int freed) |
| { |
| if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) |
| priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; |
| else { |
| IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n", |
| priv->stations[sta_id].tid[tid].tfds_in_queue, |
| freed); |
| priv->stations[sta_id].tid[tid].tfds_in_queue = 0; |
| } |
| } |
| EXPORT_SYMBOL(iwl_free_tfds_in_queue); |
| |
| /** |
| * iwl_tx_queue_free - Deallocate DMA queue. |
| * @txq: Transmit queue to deallocate. |
| * |
| * Empty queue by removing and destroying all BD's. |
| * Free all buffers. |
| * 0-fill, but do not free "txq" descriptor structure. |
| */ |
| void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id) |
| { |
| struct iwl_tx_queue *txq = &priv->txq[txq_id]; |
| struct iwl_queue *q = &txq->q; |
| struct device *dev = &priv->pci_dev->dev; |
| int i; |
| |
| if (q->n_bd == 0) |
| return; |
| |
| /* first, empty all BD's */ |
| for (; q->write_ptr != q->read_ptr; |
| q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) |
| priv->cfg->ops->lib->txq_free_tfd(priv, txq); |
| |
| /* De-alloc array of command/tx buffers */ |
| for (i = 0; i < TFD_TX_CMD_SLOTS; i++) |
| kfree(txq->cmd[i]); |
| |
| /* De-alloc circular buffer of TFDs */ |
| if (txq->q.n_bd) |
| dma_free_coherent(dev, priv->hw_params.tfd_size * |
| txq->q.n_bd, txq->tfds, txq->q.dma_addr); |
| |
| /* De-alloc array of per-TFD driver data */ |
| kfree(txq->txb); |
| txq->txb = NULL; |
| |
| /* deallocate arrays */ |
| kfree(txq->cmd); |
| kfree(txq->meta); |
| txq->cmd = NULL; |
| txq->meta = NULL; |
| |
| /* 0-fill queue descriptor structure */ |
| memset(txq, 0, sizeof(*txq)); |
| } |
| EXPORT_SYMBOL(iwl_tx_queue_free); |
| |
| /** |
| * iwl_cmd_queue_free - Deallocate DMA queue. |
| * @txq: Transmit queue to deallocate. |
| * |
| * Empty queue by removing and destroying all BD's. |
| * Free all buffers. |
| * 0-fill, but do not free "txq" descriptor structure. |
| */ |
| void iwl_cmd_queue_free(struct iwl_priv *priv) |
| { |
| struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; |
| struct iwl_queue *q = &txq->q; |
| struct device *dev = &priv->pci_dev->dev; |
| int i; |
| |
| if (q->n_bd == 0) |
| return; |
| |
| /* De-alloc array of command/tx buffers */ |
| for (i = 0; i <= TFD_CMD_SLOTS; i++) |
| kfree(txq->cmd[i]); |
| |
| /* De-alloc circular buffer of TFDs */ |
| if (txq->q.n_bd) |
| dma_free_coherent(dev, priv->hw_params.tfd_size * txq->q.n_bd, |
| txq->tfds, txq->q.dma_addr); |
| |
| /* deallocate arrays */ |
| kfree(txq->cmd); |
| kfree(txq->meta); |
| txq->cmd = NULL; |
| txq->meta = NULL; |
| |
| /* 0-fill queue descriptor structure */ |
| memset(txq, 0, sizeof(*txq)); |
| } |
| EXPORT_SYMBOL(iwl_cmd_queue_free); |
| |
| /*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** |
| * DMA services |
| * |
| * Theory of operation |
| * |
| * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer |
| * of buffer descriptors, each of which points to one or more data buffers for |
| * the device to read from or fill. Driver and device exchange status of each |
| * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty |
| * entries in each circular buffer, to protect against confusing empty and full |
| * queue states. |
| * |
| * The device reads or writes the data in the queues via the device's several |
| * DMA/FIFO channels. Each queue is mapped to a single DMA channel. |
| * |
| * For Tx queue, there are low mark and high mark limits. If, after queuing |
| * the packet for Tx, free space become < low mark, Tx queue stopped. When |
| * reclaiming packets (on 'tx done IRQ), if free space become > high mark, |
| * Tx queue resumed. |
| * |
| * See more detailed info in iwl-4965-hw.h. |
| ***************************************************/ |
| |
| int iwl_queue_space(const struct iwl_queue *q) |
| { |
| int s = q->read_ptr - q->write_ptr; |
| |
| if (q->read_ptr > q->write_ptr) |
| s -= q->n_bd; |
| |
| if (s <= 0) |
| s += q->n_window; |
| /* keep some reserve to not confuse empty and full situations */ |
| s -= 2; |
| if (s < 0) |
| s = 0; |
| return s; |
| } |
| EXPORT_SYMBOL(iwl_queue_space); |
| |
| |
| /** |
| * iwl_queue_init - Initialize queue's high/low-water and read/write indexes |
| */ |
| static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q, |
| int count, int slots_num, u32 id) |
| { |
| q->n_bd = count; |
| q->n_window = slots_num; |
| q->id = id; |
| |
| /* count must be power-of-two size, otherwise iwl_queue_inc_wrap |
| * and iwl_queue_dec_wrap are broken. */ |
| BUG_ON(!is_power_of_2(count)); |
| |
| /* slots_num must be power-of-two size, otherwise |
| * get_cmd_index is broken. */ |
| BUG_ON(!is_power_of_2(slots_num)); |
| |
| q->low_mark = q->n_window / 4; |
| if (q->low_mark < 4) |
| q->low_mark = 4; |
| |
| q->high_mark = q->n_window / 8; |
| if (q->high_mark < 2) |
| q->high_mark = 2; |
| |
| q->write_ptr = q->read_ptr = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * iwl_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue |
| */ |
| static int iwl_tx_queue_alloc(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq, u32 id) |
| { |
| struct device *dev = &priv->pci_dev->dev; |
| size_t tfd_sz = priv->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX; |
| |
| /* Driver private data, only for Tx (not command) queues, |
| * not shared with device. */ |
| if (id != IWL_CMD_QUEUE_NUM) { |
| txq->txb = kmalloc(sizeof(txq->txb[0]) * |
| TFD_QUEUE_SIZE_MAX, GFP_KERNEL); |
| if (!txq->txb) { |
| IWL_ERR(priv, "kmalloc for auxiliary BD " |
| "structures failed\n"); |
| goto error; |
| } |
| } else { |
| txq->txb = NULL; |
| } |
| |
| /* Circular buffer of transmit frame descriptors (TFDs), |
| * shared with device */ |
| txq->tfds = dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr, |
| GFP_KERNEL); |
| if (!txq->tfds) { |
| IWL_ERR(priv, "pci_alloc_consistent(%zd) failed\n", tfd_sz); |
| goto error; |
| } |
| txq->q.id = id; |
| |
| return 0; |
| |
| error: |
| kfree(txq->txb); |
| txq->txb = NULL; |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue |
| */ |
| int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, |
| int slots_num, u32 txq_id) |
| { |
| int i, len; |
| int ret; |
| int actual_slots = slots_num; |
| |
| /* |
| * Alloc buffer array for commands (Tx or other types of commands). |
| * For the command queue (#4), allocate command space + one big |
| * command for scan, since scan command is very huge; the system will |
| * not have two scans at the same time, so only one is needed. |
| * For normal Tx queues (all other queues), no super-size command |
| * space is needed. |
| */ |
| if (txq_id == IWL_CMD_QUEUE_NUM) |
| actual_slots++; |
| |
| txq->meta = kzalloc(sizeof(struct iwl_cmd_meta) * actual_slots, |
| GFP_KERNEL); |
| txq->cmd = kzalloc(sizeof(struct iwl_device_cmd *) * actual_slots, |
| GFP_KERNEL); |
| |
| if (!txq->meta || !txq->cmd) |
| goto out_free_arrays; |
| |
| len = sizeof(struct iwl_device_cmd); |
| for (i = 0; i < actual_slots; i++) { |
| /* only happens for cmd queue */ |
| if (i == slots_num) |
| len = IWL_MAX_CMD_SIZE; |
| |
| txq->cmd[i] = kmalloc(len, GFP_KERNEL); |
| if (!txq->cmd[i]) |
| goto err; |
| } |
| |
| /* Alloc driver data array and TFD circular buffer */ |
| ret = iwl_tx_queue_alloc(priv, txq, txq_id); |
| if (ret) |
| goto err; |
| |
| txq->need_update = 0; |
| |
| /* |
| * Aggregation TX queues will get their ID when aggregation begins; |
| * they overwrite the setting done here. The command FIFO doesn't |
| * need an swq_id so don't set one to catch errors, all others can |
| * be set up to the identity mapping. |
| */ |
| if (txq_id != IWL_CMD_QUEUE_NUM) |
| txq->swq_id = txq_id; |
| |
| /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise |
| * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */ |
| BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); |
| |
| /* Initialize queue's high/low-water marks, and head/tail indexes */ |
| iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id); |
| |
| /* Tell device where to find queue */ |
| priv->cfg->ops->lib->txq_init(priv, txq); |
| |
| return 0; |
| err: |
| for (i = 0; i < actual_slots; i++) |
| kfree(txq->cmd[i]); |
| out_free_arrays: |
| kfree(txq->meta); |
| kfree(txq->cmd); |
| |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL(iwl_tx_queue_init); |
| |
| /** |
| * iwl_hw_txq_ctx_free - Free TXQ Context |
| * |
| * Destroy all TX DMA queues and structures |
| */ |
| void iwl_hw_txq_ctx_free(struct iwl_priv *priv) |
| { |
| int txq_id; |
| |
| /* Tx queues */ |
| if (priv->txq) { |
| for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; |
| txq_id++) |
| if (txq_id == IWL_CMD_QUEUE_NUM) |
| iwl_cmd_queue_free(priv); |
| else |
| iwl_tx_queue_free(priv, txq_id); |
| } |
| iwl_free_dma_ptr(priv, &priv->kw); |
| |
| iwl_free_dma_ptr(priv, &priv->scd_bc_tbls); |
| |
| /* free tx queue structure */ |
| iwl_free_txq_mem(priv); |
| } |
| EXPORT_SYMBOL(iwl_hw_txq_ctx_free); |
| |
| /** |
| * iwl_txq_ctx_reset - Reset TX queue context |
| * Destroys all DMA structures and initialize them again |
| * |
| * @param priv |
| * @return error code |
| */ |
| int iwl_txq_ctx_reset(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| int txq_id, slots_num; |
| unsigned long flags; |
| |
| /* Free all tx/cmd queues and keep-warm buffer */ |
| iwl_hw_txq_ctx_free(priv); |
| |
| ret = iwl_alloc_dma_ptr(priv, &priv->scd_bc_tbls, |
| priv->hw_params.scd_bc_tbls_size); |
| if (ret) { |
| IWL_ERR(priv, "Scheduler BC Table allocation failed\n"); |
| goto error_bc_tbls; |
| } |
| /* Alloc keep-warm buffer */ |
| ret = iwl_alloc_dma_ptr(priv, &priv->kw, IWL_KW_SIZE); |
| if (ret) { |
| IWL_ERR(priv, "Keep Warm allocation failed\n"); |
| goto error_kw; |
| } |
| |
| /* allocate tx queue structure */ |
| ret = iwl_alloc_txq_mem(priv); |
| if (ret) |
| goto error; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* Turn off all Tx DMA fifos */ |
| priv->cfg->ops->lib->txq_set_sched(priv, 0); |
| |
| /* Tell NIC where to find the "keep warm" buffer */ |
| iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma >> 4); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Alloc and init all Tx queues, including the command queue (#4) */ |
| for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { |
| slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? |
| TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; |
| ret = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num, |
| txq_id); |
| if (ret) { |
| IWL_ERR(priv, "Tx %d queue init failed\n", txq_id); |
| goto error; |
| } |
| } |
| |
| return ret; |
| |
| error: |
| iwl_hw_txq_ctx_free(priv); |
| iwl_free_dma_ptr(priv, &priv->kw); |
| error_kw: |
| iwl_free_dma_ptr(priv, &priv->scd_bc_tbls); |
| error_bc_tbls: |
| return ret; |
| } |
| |
| /** |
| * iwl_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory |
| */ |
| void iwl_txq_ctx_stop(struct iwl_priv *priv) |
| { |
| int ch; |
| unsigned long flags; |
| |
| /* Turn off all Tx DMA fifos */ |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| priv->cfg->ops->lib->txq_set_sched(priv, 0); |
| |
| /* Stop each Tx DMA channel, and wait for it to be idle */ |
| for (ch = 0; ch < priv->hw_params.dma_chnl_num; ch++) { |
| iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); |
| iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG, |
| FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), |
| 1000); |
| } |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Deallocate memory for all Tx queues */ |
| iwl_hw_txq_ctx_free(priv); |
| } |
| EXPORT_SYMBOL(iwl_txq_ctx_stop); |
| |
| /* |
| * handle build REPLY_TX command notification. |
| */ |
| static void iwl_tx_cmd_build_basic(struct iwl_priv *priv, |
| struct iwl_tx_cmd *tx_cmd, |
| struct ieee80211_tx_info *info, |
| struct ieee80211_hdr *hdr, |
| u8 std_id) |
| { |
| __le16 fc = hdr->frame_control; |
| __le32 tx_flags = tx_cmd->tx_flags; |
| |
| tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { |
| tx_flags |= TX_CMD_FLG_ACK_MSK; |
| if (ieee80211_is_mgmt(fc)) |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| if (ieee80211_is_probe_resp(fc) && |
| !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) |
| tx_flags |= TX_CMD_FLG_TSF_MSK; |
| } else { |
| tx_flags &= (~TX_CMD_FLG_ACK_MSK); |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| } |
| |
| if (ieee80211_is_back_req(fc)) |
| tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; |
| |
| |
| tx_cmd->sta_id = std_id; |
| if (ieee80211_has_morefrags(fc)) |
| tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; |
| |
| if (ieee80211_is_data_qos(fc)) { |
| u8 *qc = ieee80211_get_qos_ctl(hdr); |
| tx_cmd->tid_tspec = qc[0] & 0xf; |
| tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; |
| } else { |
| tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; |
| } |
| |
| priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags); |
| |
| if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK)) |
| tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; |
| |
| tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); |
| if (ieee80211_is_mgmt(fc)) { |
| if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) |
| tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); |
| else |
| tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); |
| } else { |
| tx_cmd->timeout.pm_frame_timeout = 0; |
| } |
| |
| tx_cmd->driver_txop = 0; |
| tx_cmd->tx_flags = tx_flags; |
| tx_cmd->next_frame_len = 0; |
| } |
| |
| #define RTS_DFAULT_RETRY_LIMIT 60 |
| |
| static void iwl_tx_cmd_build_rate(struct iwl_priv *priv, |
| struct iwl_tx_cmd *tx_cmd, |
| struct ieee80211_tx_info *info, |
| __le16 fc) |
| { |
| u32 rate_flags; |
| int rate_idx; |
| u8 rts_retry_limit; |
| u8 data_retry_limit; |
| u8 rate_plcp; |
| |
| /* Set retry limit on DATA packets and Probe Responses*/ |
| if (ieee80211_is_probe_resp(fc)) |
| data_retry_limit = 3; |
| else |
| data_retry_limit = IWL_DEFAULT_TX_RETRY; |
| tx_cmd->data_retry_limit = data_retry_limit; |
| |
| /* Set retry limit on RTS packets */ |
| rts_retry_limit = RTS_DFAULT_RETRY_LIMIT; |
| if (data_retry_limit < rts_retry_limit) |
| rts_retry_limit = data_retry_limit; |
| tx_cmd->rts_retry_limit = rts_retry_limit; |
| |
| /* DATA packets will use the uCode station table for rate/antenna |
| * selection */ |
| if (ieee80211_is_data(fc)) { |
| tx_cmd->initial_rate_index = 0; |
| tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; |
| return; |
| } |
| |
| /** |
| * If the current TX rate stored in mac80211 has the MCS bit set, it's |
| * not really a TX rate. Thus, we use the lowest supported rate for |
| * this band. Also use the lowest supported rate if the stored rate |
| * index is invalid. |
| */ |
| rate_idx = info->control.rates[0].idx; |
| if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS || |
| (rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY)) |
| rate_idx = rate_lowest_index(&priv->bands[info->band], |
| info->control.sta); |
| /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ |
| if (info->band == IEEE80211_BAND_5GHZ) |
| rate_idx += IWL_FIRST_OFDM_RATE; |
| /* Get PLCP rate for tx_cmd->rate_n_flags */ |
| rate_plcp = iwl_rates[rate_idx].plcp; |
| /* Zero out flags for this packet */ |
| rate_flags = 0; |
| |
| /* Set CCK flag as needed */ |
| if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) |
| rate_flags |= RATE_MCS_CCK_MSK; |
| |
| /* Set up RTS and CTS flags for certain packets */ |
| switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { |
| case cpu_to_le16(IEEE80211_STYPE_AUTH): |
| case cpu_to_le16(IEEE80211_STYPE_DEAUTH): |
| case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): |
| case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): |
| if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) { |
| tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK; |
| tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| /* Set up antennas */ |
| priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant); |
| rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant); |
| |
| /* Set the rate in the TX cmd */ |
| tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags); |
| } |
| |
| static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv, |
| struct ieee80211_tx_info *info, |
| struct iwl_tx_cmd *tx_cmd, |
| struct sk_buff *skb_frag, |
| int sta_id) |
| { |
| struct ieee80211_key_conf *keyconf = info->control.hw_key; |
| |
| switch (keyconf->alg) { |
| case ALG_CCMP: |
| tx_cmd->sec_ctl = TX_CMD_SEC_CCM; |
| memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) |
| tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; |
| IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); |
| break; |
| |
| case ALG_TKIP: |
| tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; |
| ieee80211_get_tkip_key(keyconf, skb_frag, |
| IEEE80211_TKIP_P2_KEY, tx_cmd->key); |
| IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n"); |
| break; |
| |
| case ALG_WEP: |
| tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP | |
| (keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT); |
| |
| if (keyconf->keylen == WEP_KEY_LEN_128) |
| tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; |
| |
| memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); |
| |
| IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " |
| "with key %d\n", keyconf->keyidx); |
| break; |
| |
| default: |
| IWL_ERR(priv, "Unknown encode alg %d\n", keyconf->alg); |
| break; |
| } |
| } |
| |
| /* |
| * start REPLY_TX command process |
| */ |
| int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_sta *sta = info->control.sta; |
| struct iwl_station_priv *sta_priv = NULL; |
| struct iwl_tx_queue *txq; |
| struct iwl_queue *q; |
| struct iwl_device_cmd *out_cmd; |
| struct iwl_cmd_meta *out_meta; |
| struct iwl_tx_cmd *tx_cmd; |
| int swq_id, txq_id; |
| dma_addr_t phys_addr; |
| dma_addr_t txcmd_phys; |
| dma_addr_t scratch_phys; |
| u16 len, len_org, firstlen, secondlen; |
| u16 seq_number = 0; |
| __le16 fc; |
| u8 hdr_len; |
| u8 sta_id; |
| u8 wait_write_ptr = 0; |
| u8 tid = 0; |
| u8 *qc = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| if (iwl_is_rfkill(priv)) { |
| IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); |
| goto drop_unlock; |
| } |
| |
| fc = hdr->frame_control; |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| if (ieee80211_is_auth(fc)) |
| IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); |
| else if (ieee80211_is_assoc_req(fc)) |
| IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); |
| else if (ieee80211_is_reassoc_req(fc)) |
| IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); |
| #endif |
| |
| hdr_len = ieee80211_hdrlen(fc); |
| |
| /* Find (or create) index into station table for destination station */ |
| if (info->flags & IEEE80211_TX_CTL_INJECTED) |
| sta_id = priv->hw_params.bcast_sta_id; |
| else |
| sta_id = iwl_get_sta_id(priv, hdr); |
| if (sta_id == IWL_INVALID_STATION) { |
| IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", |
| hdr->addr1); |
| goto drop_unlock; |
| } |
| |
| IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); |
| |
| if (sta) |
| sta_priv = (void *)sta->drv_priv; |
| |
| if (sta_priv && sta_id != priv->hw_params.bcast_sta_id && |
| sta_priv->asleep) { |
| WARN_ON(!(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)); |
| /* |
| * This sends an asynchronous command to the device, |
| * but we can rely on it being processed before the |
| * next frame is processed -- and the next frame to |
| * this station is the one that will consume this |
| * counter. |
| * For now set the counter to just 1 since we do not |
| * support uAPSD yet. |
| */ |
| iwl_sta_modify_sleep_tx_count(priv, sta_id, 1); |
| } |
| |
| txq_id = get_queue_from_ac(skb_get_queue_mapping(skb)); |
| if (ieee80211_is_data_qos(fc)) { |
| qc = ieee80211_get_qos_ctl(hdr); |
| tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; |
| if (unlikely(tid >= MAX_TID_COUNT)) |
| goto drop_unlock; |
| seq_number = priv->stations[sta_id].tid[tid].seq_number; |
| seq_number &= IEEE80211_SCTL_SEQ; |
| hdr->seq_ctrl = hdr->seq_ctrl & |
| cpu_to_le16(IEEE80211_SCTL_FRAG); |
| hdr->seq_ctrl |= cpu_to_le16(seq_number); |
| seq_number += 0x10; |
| /* aggregation is on for this <sta,tid> */ |
| if (info->flags & IEEE80211_TX_CTL_AMPDU && |
| priv->stations[sta_id].tid[tid].agg.state == IWL_AGG_ON) { |
| txq_id = priv->stations[sta_id].tid[tid].agg.txq_id; |
| } |
| } |
| |
| txq = &priv->txq[txq_id]; |
| swq_id = txq->swq_id; |
| q = &txq->q; |
| |
| if (unlikely(iwl_queue_space(q) < q->high_mark)) |
| goto drop_unlock; |
| |
| if (ieee80211_is_data_qos(fc)) |
| priv->stations[sta_id].tid[tid].tfds_in_queue++; |
| |
| /* Set up driver data for this TFD */ |
| memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info)); |
| txq->txb[q->write_ptr].skb[0] = skb; |
| |
| /* Set up first empty entry in queue's array of Tx/cmd buffers */ |
| out_cmd = txq->cmd[q->write_ptr]; |
| out_meta = &txq->meta[q->write_ptr]; |
| tx_cmd = &out_cmd->cmd.tx; |
| memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); |
| memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd)); |
| |
| /* |
| * Set up the Tx-command (not MAC!) header. |
| * Store the chosen Tx queue and TFD index within the sequence field; |
| * after Tx, uCode's Tx response will return this value so driver can |
| * locate the frame within the tx queue and do post-tx processing. |
| */ |
| out_cmd->hdr.cmd = REPLY_TX; |
| out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | |
| INDEX_TO_SEQ(q->write_ptr))); |
| |
| /* Copy MAC header from skb into command buffer */ |
| memcpy(tx_cmd->hdr, hdr, hdr_len); |
| |
| |
| /* Total # bytes to be transmitted */ |
| len = (u16)skb->len; |
| tx_cmd->len = cpu_to_le16(len); |
| |
| if (info->control.hw_key) |
| iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); |
| |
| /* TODO need this for burst mode later on */ |
| iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); |
| iwl_dbg_log_tx_data_frame(priv, len, hdr); |
| |
| iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc); |
| |
| iwl_update_stats(priv, true, fc, len); |
| /* |
| * Use the first empty entry in this queue's command buffer array |
| * to contain the Tx command and MAC header concatenated together |
| * (payload data will be in another buffer). |
| * Size of this varies, due to varying MAC header length. |
| * If end is not dword aligned, we'll have 2 extra bytes at the end |
| * of the MAC header (device reads on dword boundaries). |
| * We'll tell device about this padding later. |
| */ |
| len = sizeof(struct iwl_tx_cmd) + |
| sizeof(struct iwl_cmd_header) + hdr_len; |
| |
| len_org = len; |
| firstlen = len = (len + 3) & ~3; |
| |
| if (len_org != len) |
| len_org = 1; |
| else |
| len_org = 0; |
| |
| /* Tell NIC about any 2-byte padding after MAC header */ |
| if (len_org) |
| tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; |
| |
| /* Physical address of this Tx command's header (not MAC header!), |
| * within command buffer array. */ |
| txcmd_phys = pci_map_single(priv->pci_dev, |
| &out_cmd->hdr, len, |
| PCI_DMA_BIDIRECTIONAL); |
| pci_unmap_addr_set(out_meta, mapping, txcmd_phys); |
| pci_unmap_len_set(out_meta, len, len); |
| /* Add buffer containing Tx command and MAC(!) header to TFD's |
| * first entry */ |
| priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, |
| txcmd_phys, len, 1, 0); |
| |
| if (!ieee80211_has_morefrags(hdr->frame_control)) { |
| txq->need_update = 1; |
| if (qc) |
| priv->stations[sta_id].tid[tid].seq_number = seq_number; |
| } else { |
| wait_write_ptr = 1; |
| txq->need_update = 0; |
| } |
| |
| /* Set up TFD's 2nd entry to point directly to remainder of skb, |
| * if any (802.11 null frames have no payload). */ |
| secondlen = len = skb->len - hdr_len; |
| if (len) { |
| phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, |
| len, PCI_DMA_TODEVICE); |
| priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, |
| phys_addr, len, |
| 0, 0); |
| } |
| |
| scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + |
| offsetof(struct iwl_tx_cmd, scratch); |
| |
| len = sizeof(struct iwl_tx_cmd) + |
| sizeof(struct iwl_cmd_header) + hdr_len; |
| /* take back ownership of DMA buffer to enable update */ |
| pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys, |
| len, PCI_DMA_BIDIRECTIONAL); |
| tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); |
| tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); |
| |
| IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", |
| le16_to_cpu(out_cmd->hdr.sequence)); |
| IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); |
| iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd)); |
| iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); |
| |
| /* Set up entry for this TFD in Tx byte-count array */ |
| if (info->flags & IEEE80211_TX_CTL_AMPDU) |
| priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, |
| le16_to_cpu(tx_cmd->len)); |
| |
| pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys, |
| len, PCI_DMA_BIDIRECTIONAL); |
| |
| trace_iwlwifi_dev_tx(priv, |
| &((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr], |
| sizeof(struct iwl_tfd), |
| &out_cmd->hdr, firstlen, |
| skb->data + hdr_len, secondlen); |
| |
| /* Tell device the write index *just past* this latest filled TFD */ |
| q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); |
| iwl_txq_update_write_ptr(priv, txq); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* |
| * At this point the frame is "transmitted" successfully |
| * and we will get a TX status notification eventually, |
| * regardless of the value of ret. "ret" only indicates |
| * whether or not we should update the write pointer. |
| */ |
| |
| /* avoid atomic ops if it isn't an associated client */ |
| if (sta_priv && sta_priv->client) |
| atomic_inc(&sta_priv->pending_frames); |
| |
| if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) { |
| if (wait_write_ptr) { |
| spin_lock_irqsave(&priv->lock, flags); |
| txq->need_update = 1; |
| iwl_txq_update_write_ptr(priv, txq); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } else { |
| iwl_stop_queue(priv, txq->swq_id); |
| } |
| } |
| |
| return 0; |
| |
| drop_unlock: |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return -1; |
| } |
| EXPORT_SYMBOL(iwl_tx_skb); |
| |
| /*************** HOST COMMAND QUEUE FUNCTIONS *****/ |
| |
| /** |
| * iwl_enqueue_hcmd - enqueue a uCode command |
| * @priv: device private data point |
| * @cmd: a point to the ucode command structure |
| * |
| * The function returns < 0 values to indicate the operation is |
| * failed. On success, it turns the index (> 0) of command in the |
| * command queue. |
| */ |
| int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) |
| { |
| struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; |
| struct iwl_queue *q = &txq->q; |
| struct iwl_device_cmd *out_cmd; |
| struct iwl_cmd_meta *out_meta; |
| dma_addr_t phys_addr; |
| unsigned long flags; |
| int len; |
| u32 idx; |
| u16 fix_size; |
| |
| cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len); |
| fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr)); |
| |
| /* If any of the command structures end up being larger than |
| * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then |
| * we will need to increase the size of the TFD entries |
| * Also, check to see if command buffer should not exceed the size |
| * of device_cmd and max_cmd_size. */ |
| BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) && |
| !(cmd->flags & CMD_SIZE_HUGE)); |
| BUG_ON(fix_size > IWL_MAX_CMD_SIZE); |
| |
| if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { |
| IWL_WARN(priv, "Not sending command - %s KILL\n", |
| iwl_is_rfkill(priv) ? "RF" : "CT"); |
| return -EIO; |
| } |
| |
| if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) { |
| IWL_ERR(priv, "No space in command queue\n"); |
| if (iwl_within_ct_kill_margin(priv)) |
| iwl_tt_enter_ct_kill(priv); |
| else { |
| IWL_ERR(priv, "Restarting adapter due to queue full\n"); |
| queue_work(priv->workqueue, &priv->restart); |
| } |
| return -ENOSPC; |
| } |
| |
| spin_lock_irqsave(&priv->hcmd_lock, flags); |
| |
| idx = get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE); |
| out_cmd = txq->cmd[idx]; |
| out_meta = &txq->meta[idx]; |
| |
| memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */ |
| out_meta->flags = cmd->flags; |
| if (cmd->flags & CMD_WANT_SKB) |
| out_meta->source = cmd; |
| if (cmd->flags & CMD_ASYNC) |
| out_meta->callback = cmd->callback; |
| |
| out_cmd->hdr.cmd = cmd->id; |
| memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len); |
| |
| /* At this point, the out_cmd now has all of the incoming cmd |
| * information */ |
| |
| out_cmd->hdr.flags = 0; |
| out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) | |
| INDEX_TO_SEQ(q->write_ptr)); |
| if (cmd->flags & CMD_SIZE_HUGE) |
| out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; |
| len = sizeof(struct iwl_device_cmd); |
| if (idx == TFD_CMD_SLOTS) |
| len = IWL_MAX_CMD_SIZE; |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| switch (out_cmd->hdr.cmd) { |
| case REPLY_TX_LINK_QUALITY_CMD: |
| case SENSITIVITY_CMD: |
| IWL_DEBUG_HC_DUMP(priv, "Sending command %s (#%x), seq: 0x%04X, " |
| "%d bytes at %d[%d]:%d\n", |
| get_cmd_string(out_cmd->hdr.cmd), |
| out_cmd->hdr.cmd, |
| le16_to_cpu(out_cmd->hdr.sequence), fix_size, |
| q->write_ptr, idx, IWL_CMD_QUEUE_NUM); |
| break; |
| default: |
| IWL_DEBUG_HC(priv, "Sending command %s (#%x), seq: 0x%04X, " |
| "%d bytes at %d[%d]:%d\n", |
| get_cmd_string(out_cmd->hdr.cmd), |
| out_cmd->hdr.cmd, |
| le16_to_cpu(out_cmd->hdr.sequence), fix_size, |
| q->write_ptr, idx, IWL_CMD_QUEUE_NUM); |
| } |
| #endif |
| txq->need_update = 1; |
| |
| if (priv->cfg->ops->lib->txq_update_byte_cnt_tbl) |
| /* Set up entry in queue's byte count circular buffer */ |
| priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); |
| |
| phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr, |
| fix_size, PCI_DMA_BIDIRECTIONAL); |
| pci_unmap_addr_set(out_meta, mapping, phys_addr); |
| pci_unmap_len_set(out_meta, len, fix_size); |
| |
| trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags); |
| |
| priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, |
| phys_addr, fix_size, 1, |
| U32_PAD(cmd->len)); |
| |
| /* Increment and update queue's write index */ |
| q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); |
| iwl_txq_update_write_ptr(priv, txq); |
| |
| spin_unlock_irqrestore(&priv->hcmd_lock, flags); |
| return idx; |
| } |
| |
| static void iwl_tx_status(struct iwl_priv *priv, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct ieee80211_sta *sta; |
| struct iwl_station_priv *sta_priv; |
| |
| sta = ieee80211_find_sta(priv->vif, hdr->addr1); |
| if (sta) { |
| sta_priv = (void *)sta->drv_priv; |
| /* avoid atomic ops if this isn't a client */ |
| if (sta_priv->client && |
| atomic_dec_return(&sta_priv->pending_frames) == 0) |
| ieee80211_sta_block_awake(priv->hw, sta, false); |
| } |
| |
| ieee80211_tx_status_irqsafe(priv->hw, skb); |
| } |
| |
| int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) |
| { |
| struct iwl_tx_queue *txq = &priv->txq[txq_id]; |
| struct iwl_queue *q = &txq->q; |
| struct iwl_tx_info *tx_info; |
| int nfreed = 0; |
| struct ieee80211_hdr *hdr; |
| |
| if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { |
| IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, " |
| "is out of range [0-%d] %d %d.\n", txq_id, |
| index, q->n_bd, q->write_ptr, q->read_ptr); |
| return 0; |
| } |
| |
| for (index = iwl_queue_inc_wrap(index, q->n_bd); |
| q->read_ptr != index; |
| q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { |
| |
| tx_info = &txq->txb[txq->q.read_ptr]; |
| iwl_tx_status(priv, tx_info->skb[0]); |
| |
| hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data; |
| if (hdr && ieee80211_is_data_qos(hdr->frame_control)) |
| nfreed++; |
| tx_info->skb[0] = NULL; |
| |
| if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) |
| priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq); |
| |
| priv->cfg->ops->lib->txq_free_tfd(priv, txq); |
| } |
| return nfreed; |
| } |
| EXPORT_SYMBOL(iwl_tx_queue_reclaim); |
| |
| |
| /** |
| * iwl_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd |
| * |
| * When FW advances 'R' index, all entries between old and new 'R' index |
| * need to be reclaimed. As result, some free space forms. If there is |
| * enough free space (> low mark), wake the stack that feeds us. |
| */ |
| static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, |
| int idx, int cmd_idx) |
| { |
| struct iwl_tx_queue *txq = &priv->txq[txq_id]; |
| struct iwl_queue *q = &txq->q; |
| int nfreed = 0; |
| |
| if ((idx >= q->n_bd) || (iwl_queue_used(q, idx) == 0)) { |
| IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, " |
| "is out of range [0-%d] %d %d.\n", txq_id, |
| idx, q->n_bd, q->write_ptr, q->read_ptr); |
| return; |
| } |
| |
| for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; |
| q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { |
| |
| if (nfreed++ > 0) { |
| IWL_ERR(priv, "HCMD skipped: index (%d) %d %d\n", idx, |
| q->write_ptr, q->read_ptr); |
| queue_work(priv->workqueue, &priv->restart); |
| } |
| |
| } |
| } |
| |
| /** |
| * iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them |
| * @rxb: Rx buffer to reclaim |
| * |
| * If an Rx buffer has an async callback associated with it the callback |
| * will be executed. The attached skb (if present) will only be freed |
| * if the callback returns 1 |
| */ |
| void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| u16 sequence = le16_to_cpu(pkt->hdr.sequence); |
| int txq_id = SEQ_TO_QUEUE(sequence); |
| int index = SEQ_TO_INDEX(sequence); |
| int cmd_index; |
| bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME); |
| struct iwl_device_cmd *cmd; |
| struct iwl_cmd_meta *meta; |
| |
| /* If a Tx command is being handled and it isn't in the actual |
| * command queue then there a command routing bug has been introduced |
| * in the queue management code. */ |
| if (WARN(txq_id != IWL_CMD_QUEUE_NUM, |
| "wrong command queue %d, sequence 0x%X readp=%d writep=%d\n", |
| txq_id, sequence, |
| priv->txq[IWL_CMD_QUEUE_NUM].q.read_ptr, |
| priv->txq[IWL_CMD_QUEUE_NUM].q.write_ptr)) { |
| iwl_print_hex_error(priv, pkt, 32); |
| return; |
| } |
| |
| cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); |
| cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; |
| meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index]; |
| |
| pci_unmap_single(priv->pci_dev, |
| pci_unmap_addr(meta, mapping), |
| pci_unmap_len(meta, len), |
| PCI_DMA_BIDIRECTIONAL); |
| |
| /* Input error checking is done when commands are added to queue. */ |
| if (meta->flags & CMD_WANT_SKB) { |
| meta->source->reply_page = (unsigned long)rxb_addr(rxb); |
| rxb->page = NULL; |
| } else if (meta->callback) |
| meta->callback(priv, cmd, pkt); |
| |
| iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index); |
| |
| if (!(meta->flags & CMD_ASYNC)) { |
| clear_bit(STATUS_HCMD_ACTIVE, &priv->status); |
| IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n", |
| get_cmd_string(cmd->hdr.cmd)); |
| wake_up_interruptible(&priv->wait_command_queue); |
| } |
| } |
| EXPORT_SYMBOL(iwl_tx_cmd_complete); |
| |
| /* |
| * Find first available (lowest unused) Tx Queue, mark it "active". |
| * Called only when finding queue for aggregation. |
| * Should never return anything < 7, because they should already |
| * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) |
| */ |
| static int iwl_txq_ctx_activate_free(struct iwl_priv *priv) |
| { |
| int txq_id; |
| |
| for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) |
| if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk)) |
| return txq_id; |
| return -1; |
| } |
| |
| int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn) |
| { |
| int sta_id; |
| int tx_fifo; |
| int txq_id; |
| int ret; |
| unsigned long flags; |
| struct iwl_tid_data *tid_data; |
| |
| tx_fifo = get_fifo_from_tid(tid); |
| if (unlikely(tx_fifo < 0)) |
| return tx_fifo; |
| |
| IWL_WARN(priv, "%s on ra = %pM tid = %d\n", |
| __func__, ra, tid); |
| |
| sta_id = iwl_find_station(priv, ra); |
| if (sta_id == IWL_INVALID_STATION) { |
| IWL_ERR(priv, "Start AGG on invalid station\n"); |
| return -ENXIO; |
| } |
| if (unlikely(tid >= MAX_TID_COUNT)) |
| return -EINVAL; |
| |
| if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) { |
| IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n"); |
| return -ENXIO; |
| } |
| |
| txq_id = iwl_txq_ctx_activate_free(priv); |
| if (txq_id == -1) { |
| IWL_ERR(priv, "No free aggregation queue available\n"); |
| return -ENXIO; |
| } |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| tid_data = &priv->stations[sta_id].tid[tid]; |
| *ssn = SEQ_TO_SN(tid_data->seq_number); |
| tid_data->agg.txq_id = txq_id; |
| priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(tx_fifo, txq_id); |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo, |
| sta_id, tid, *ssn); |
| if (ret) |
| return ret; |
| |
| if (tid_data->tfds_in_queue == 0) { |
| IWL_DEBUG_HT(priv, "HW queue is empty\n"); |
| tid_data->agg.state = IWL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(priv->vif, ra, tid); |
| } else { |
| IWL_DEBUG_HT(priv, "HW queue is NOT empty: %d packets in HW queue\n", |
| tid_data->tfds_in_queue); |
| tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(iwl_tx_agg_start); |
| |
| int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) |
| { |
| int tx_fifo_id, txq_id, sta_id, ssn = -1; |
| struct iwl_tid_data *tid_data; |
| int write_ptr, read_ptr; |
| unsigned long flags; |
| |
| if (!ra) { |
| IWL_ERR(priv, "ra = NULL\n"); |
| return -EINVAL; |
| } |
| |
| tx_fifo_id = get_fifo_from_tid(tid); |
| if (unlikely(tx_fifo_id < 0)) |
| return tx_fifo_id; |
| |
| sta_id = iwl_find_station(priv, ra); |
| |
| if (sta_id == IWL_INVALID_STATION) { |
| IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); |
| return -ENXIO; |
| } |
| |
| if (priv->stations[sta_id].tid[tid].agg.state == |
| IWL_EMPTYING_HW_QUEUE_ADDBA) { |
| IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); |
| ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid); |
| priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; |
| return 0; |
| } |
| |
| if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) |
| IWL_WARN(priv, "Stopping AGG while state not ON or starting\n"); |
| |
| tid_data = &priv->stations[sta_id].tid[tid]; |
| ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; |
| txq_id = tid_data->agg.txq_id; |
| write_ptr = priv->txq[txq_id].q.write_ptr; |
| read_ptr = priv->txq[txq_id].q.read_ptr; |
| |
| /* The queue is not empty */ |
| if (write_ptr != read_ptr) { |
| IWL_DEBUG_HT(priv, "Stopping a non empty AGG HW QUEUE\n"); |
| priv->stations[sta_id].tid[tid].agg.state = |
| IWL_EMPTYING_HW_QUEUE_DELBA; |
| return 0; |
| } |
| |
| IWL_DEBUG_HT(priv, "HW queue is empty\n"); |
| priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| /* |
| * the only reason this call can fail is queue number out of range, |
| * which can happen if uCode is reloaded and all the station |
| * information are lost. if it is outside the range, there is no need |
| * to deactivate the uCode queue, just return "success" to allow |
| * mac80211 to clean up it own data. |
| */ |
| priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, ssn, |
| tx_fifo_id); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_tx_agg_stop); |
| |
| int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id) |
| { |
| struct iwl_queue *q = &priv->txq[txq_id].q; |
| u8 *addr = priv->stations[sta_id].sta.sta.addr; |
| struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid]; |
| |
| switch (priv->stations[sta_id].tid[tid].agg.state) { |
| case IWL_EMPTYING_HW_QUEUE_DELBA: |
| /* We are reclaiming the last packet of the */ |
| /* aggregated HW queue */ |
| if ((txq_id == tid_data->agg.txq_id) && |
| (q->read_ptr == q->write_ptr)) { |
| u16 ssn = SEQ_TO_SN(tid_data->seq_number); |
| int tx_fifo = get_fifo_from_tid(tid); |
| IWL_DEBUG_HT(priv, "HW queue empty: continue DELBA flow\n"); |
| priv->cfg->ops->lib->txq_agg_disable(priv, txq_id, |
| ssn, tx_fifo); |
| tid_data->agg.state = IWL_AGG_OFF; |
| ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, addr, tid); |
| } |
| break; |
| case IWL_EMPTYING_HW_QUEUE_ADDBA: |
| /* We are reclaiming the last packet of the queue */ |
| if (tid_data->tfds_in_queue == 0) { |
| IWL_DEBUG_HT(priv, "HW queue empty: continue ADDBA flow\n"); |
| tid_data->agg.state = IWL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(priv->vif, addr, tid); |
| } |
| break; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_txq_check_empty); |
| |
| /** |
| * iwl_tx_status_reply_compressed_ba - Update tx status from block-ack |
| * |
| * Go through block-ack's bitmap of ACK'd frames, update driver's record of |
| * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. |
| */ |
| static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv, |
| struct iwl_ht_agg *agg, |
| struct iwl_compressed_ba_resp *ba_resp) |
| |
| { |
| int i, sh, ack; |
| u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| u64 bitmap; |
| int successes = 0; |
| struct ieee80211_tx_info *info; |
| |
| if (unlikely(!agg->wait_for_ba)) { |
| IWL_ERR(priv, "Received BA when not expected\n"); |
| return -EINVAL; |
| } |
| |
| /* Mark that the expected block-ack response arrived */ |
| agg->wait_for_ba = 0; |
| IWL_DEBUG_TX_REPLY(priv, "BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); |
| |
| /* Calculate shift to align block-ack bits with our Tx window bits */ |
| sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4); |
| if (sh < 0) /* tbw something is wrong with indices */ |
| sh += 0x100; |
| |
| /* don't use 64-bit values for now */ |
| bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; |
| |
| if (agg->frame_count > (64 - sh)) { |
| IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size"); |
| return -1; |
| } |
| |
| /* check for success or failure according to the |
| * transmitted bitmap and block-ack bitmap */ |
| bitmap &= agg->bitmap; |
| |
| /* For each frame attempted in aggregation, |
| * update driver's record of tx frame's status. */ |
| for (i = 0; i < agg->frame_count ; i++) { |
| ack = bitmap & (1ULL << i); |
| successes += !!ack; |
| IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n", |
| ack ? "ACK" : "NACK", i, (agg->start_idx + i) & 0xff, |
| agg->start_idx + i); |
| } |
| |
| info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb[0]); |
| memset(&info->status, 0, sizeof(info->status)); |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| info->flags |= IEEE80211_TX_STAT_AMPDU; |
| info->status.ampdu_ack_map = successes; |
| info->status.ampdu_ack_len = agg->frame_count; |
| iwl_hwrate_to_tx_control(priv, agg->rate_n_flags, info); |
| |
| IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA |
| * |
| * Handles block-acknowledge notification from device, which reports success |
| * of frames sent via aggregation. |
| */ |
| void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; |
| struct iwl_tx_queue *txq = NULL; |
| struct iwl_ht_agg *agg; |
| int index; |
| int sta_id; |
| int tid; |
| |
| /* "flow" corresponds to Tx queue */ |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| |
| /* "ssn" is start of block-ack Tx window, corresponds to index |
| * (in Tx queue's circular buffer) of first TFD/frame in window */ |
| u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); |
| |
| if (scd_flow >= priv->hw_params.max_txq_num) { |
| IWL_ERR(priv, |
| "BUG_ON scd_flow is bigger than number of queues\n"); |
| return; |
| } |
| |
| txq = &priv->txq[scd_flow]; |
| sta_id = ba_resp->sta_id; |
| tid = ba_resp->tid; |
| agg = &priv->stations[sta_id].tid[tid].agg; |
| |
| /* Find index just before block-ack window */ |
| index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); |
| |
| /* TODO: Need to get this copy more safely - now good for debug */ |
| |
| IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, " |
| "sta_id = %d\n", |
| agg->wait_for_ba, |
| (u8 *) &ba_resp->sta_addr_lo32, |
| ba_resp->sta_id); |
| IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = " |
| "%d, scd_ssn = %d\n", |
| ba_resp->tid, |
| ba_resp->seq_ctl, |
| (unsigned long long)le64_to_cpu(ba_resp->bitmap), |
| ba_resp->scd_flow, |
| ba_resp->scd_ssn); |
| IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n", |
| agg->start_idx, |
| (unsigned long long)agg->bitmap); |
| |
| /* Update driver's record of ACK vs. not for each frame in window */ |
| iwl_tx_status_reply_compressed_ba(priv, agg, ba_resp); |
| |
| /* Release all TFDs before the SSN, i.e. all TFDs in front of |
| * block-ack window (we assume that they've been successfully |
| * transmitted ... if not, it's too late anyway). */ |
| if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { |
| /* calculate mac80211 ampdu sw queue to wake */ |
| int freed = iwl_tx_queue_reclaim(priv, scd_flow, index); |
| iwl_free_tfds_in_queue(priv, sta_id, tid, freed); |
| |
| if ((iwl_queue_space(&txq->q) > txq->q.low_mark) && |
| priv->mac80211_registered && |
| (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) |
| iwl_wake_queue(priv, txq->swq_id); |
| |
| iwl_txq_check_empty(priv, sta_id, tid, scd_flow); |
| } |
| } |
| EXPORT_SYMBOL(iwl_rx_reply_compressed_ba); |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x |
| |
| const char *iwl_get_tx_fail_reason(u32 status) |
| { |
| switch (status & TX_STATUS_MSK) { |
| case TX_STATUS_SUCCESS: |
| return "SUCCESS"; |
| TX_STATUS_ENTRY(SHORT_LIMIT); |
| TX_STATUS_ENTRY(LONG_LIMIT); |
| TX_STATUS_ENTRY(FIFO_UNDERRUN); |
| TX_STATUS_ENTRY(MGMNT_ABORT); |
| TX_STATUS_ENTRY(NEXT_FRAG); |
| TX_STATUS_ENTRY(LIFE_EXPIRE); |
| TX_STATUS_ENTRY(DEST_PS); |
| TX_STATUS_ENTRY(ABORTED); |
| TX_STATUS_ENTRY(BT_RETRY); |
| TX_STATUS_ENTRY(STA_INVALID); |
| TX_STATUS_ENTRY(FRAG_DROPPED); |
| TX_STATUS_ENTRY(TID_DISABLE); |
| TX_STATUS_ENTRY(FRAME_FLUSHED); |
| TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); |
| TX_STATUS_ENTRY(TX_LOCKED); |
| TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); |
| } |
| |
| return "UNKNOWN"; |
| } |
| EXPORT_SYMBOL(iwl_get_tx_fail_reason); |
| #endif /* CONFIG_IWLWIFI_DEBUG */ |