blob: ddd5b3a3df20c5467e2757f91259128ad546e896 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* fscrypt.h: declarations for per-file encryption
*
* Filesystems that implement per-file encryption include this header
* file with the __FS_HAS_ENCRYPTION set according to whether that filesystem
* is being built with encryption support or not.
*
* Copyright (C) 2015, Google, Inc.
*
* Written by Michael Halcrow, 2015.
* Modified by Jaegeuk Kim, 2015.
*/
#ifndef _LINUX_FSCRYPT_H
#define _LINUX_FSCRYPT_H
#include <linux/fs.h>
#define FS_CRYPTO_BLOCK_SIZE 16
struct fscrypt_ctx;
/* iv sector for security/pfe/pfk_fscrypt.c and f2fs */
#define PG_DUN(i, p) \
(((((u64)(i)->i_ino) & 0xffffffff) << 32) | ((p)->index & 0xffffffff))
struct fscrypt_info;
struct fscrypt_str {
unsigned char *name;
u32 len;
};
struct fscrypt_name {
const struct qstr *usr_fname;
struct fscrypt_str disk_name;
u32 hash;
u32 minor_hash;
struct fscrypt_str crypto_buf;
};
#define FSTR_INIT(n, l) { .name = n, .len = l }
#define FSTR_TO_QSTR(f) QSTR_INIT((f)->name, (f)->len)
#define fname_name(p) ((p)->disk_name.name)
#define fname_len(p) ((p)->disk_name.len)
/* Maximum value for the third parameter of fscrypt_operations.set_context(). */
#define FSCRYPT_SET_CONTEXT_MAX_SIZE 28
#if __FS_HAS_ENCRYPTION
#include <linux/fscrypt_supp.h>
#else
#include <linux/fscrypt_notsupp.h>
#endif
/**
* fscrypt_require_key - require an inode's encryption key
* @inode: the inode we need the key for
*
* If the inode is encrypted, set up its encryption key if not already done.
* Then require that the key be present and return -ENOKEY otherwise.
*
* No locks are needed, and the key will live as long as the struct inode --- so
* it won't go away from under you.
*
* Return: 0 on success, -ENOKEY if the key is missing, or another -errno code
* if a problem occurred while setting up the encryption key.
*/
static inline int fscrypt_require_key(struct inode *inode)
{
if (IS_ENCRYPTED(inode)) {
int err = fscrypt_get_encryption_info(inode);
if (err)
return err;
if (!fscrypt_has_encryption_key(inode))
return -ENOKEY;
}
return 0;
}
/**
* fscrypt_prepare_link - prepare to link an inode into a possibly-encrypted directory
* @old_dentry: an existing dentry for the inode being linked
* @dir: the target directory
* @dentry: negative dentry for the target filename
*
* A new link can only be added to an encrypted directory if the directory's
* encryption key is available --- since otherwise we'd have no way to encrypt
* the filename. Therefore, we first set up the directory's encryption key (if
* not already done) and return an error if it's unavailable.
*
* We also verify that the link will not violate the constraint that all files
* in an encrypted directory tree use the same encryption policy.
*
* Return: 0 on success, -ENOKEY if the directory's encryption key is missing,
* -EPERM if the link would result in an inconsistent encryption policy, or
* another -errno code.
*/
static inline int fscrypt_prepare_link(struct dentry *old_dentry,
struct inode *dir,
struct dentry *dentry)
{
if (IS_ENCRYPTED(dir))
return __fscrypt_prepare_link(d_inode(old_dentry), dir);
return 0;
}
/**
* fscrypt_prepare_rename - prepare for a rename between possibly-encrypted directories
* @old_dir: source directory
* @old_dentry: dentry for source file
* @new_dir: target directory
* @new_dentry: dentry for target location (may be negative unless exchanging)
* @flags: rename flags (we care at least about %RENAME_EXCHANGE)
*
* Prepare for ->rename() where the source and/or target directories may be
* encrypted. A new link can only be added to an encrypted directory if the
* directory's encryption key is available --- since otherwise we'd have no way
* to encrypt the filename. A rename to an existing name, on the other hand,
* *is* cryptographically possible without the key. However, we take the more
* conservative approach and just forbid all no-key renames.
*
* We also verify that the rename will not violate the constraint that all files
* in an encrypted directory tree use the same encryption policy.
*
* Return: 0 on success, -ENOKEY if an encryption key is missing, -EPERM if the
* rename would cause inconsistent encryption policies, or another -errno code.
*/
static inline int fscrypt_prepare_rename(struct inode *old_dir,
struct dentry *old_dentry,
struct inode *new_dir,
struct dentry *new_dentry,
unsigned int flags)
{
if (IS_ENCRYPTED(old_dir) || IS_ENCRYPTED(new_dir))
return __fscrypt_prepare_rename(old_dir, old_dentry,
new_dir, new_dentry, flags);
return 0;
}
/**
* fscrypt_prepare_lookup - prepare to lookup a name in a possibly-encrypted directory
* @dir: directory being searched
* @dentry: filename being looked up
* @flags: lookup flags
*
* Prepare for ->lookup() in a directory which may be encrypted. Lookups can be
* done with or without the directory's encryption key; without the key,
* filenames are presented in encrypted form. Therefore, we'll try to set up
* the directory's encryption key, but even without it the lookup can continue.
*
* To allow invalidating stale dentries if the directory's encryption key is
* added later, we also install a custom ->d_revalidate() method and use the
* DCACHE_ENCRYPTED_WITH_KEY flag to indicate whether a given dentry is a
* plaintext name (flag set) or a ciphertext name (flag cleared).
*
* Return: 0 on success, -errno if a problem occurred while setting up the
* encryption key
*/
static inline int fscrypt_prepare_lookup(struct inode *dir,
struct dentry *dentry,
unsigned int flags)
{
if (IS_ENCRYPTED(dir))
return __fscrypt_prepare_lookup(dir, dentry);
return 0;
}
/**
* fscrypt_prepare_setattr - prepare to change a possibly-encrypted inode's attributes
* @dentry: dentry through which the inode is being changed
* @attr: attributes to change
*
* Prepare for ->setattr() on a possibly-encrypted inode. On an encrypted file,
* most attribute changes are allowed even without the encryption key. However,
* without the encryption key we do have to forbid truncates. This is needed
* because the size being truncated to may not be a multiple of the filesystem
* block size, and in that case we'd have to decrypt the final block, zero the
* portion past i_size, and re-encrypt it. (We *could* allow truncating to a
* filesystem block boundary, but it's simpler to just forbid all truncates ---
* and we already forbid all other contents modifications without the key.)
*
* Return: 0 on success, -ENOKEY if the key is missing, or another -errno code
* if a problem occurred while setting up the encryption key.
*/
static inline int fscrypt_prepare_setattr(struct dentry *dentry,
struct iattr *attr)
{
if (attr->ia_valid & ATTR_SIZE)
return fscrypt_require_key(d_inode(dentry));
return 0;
}
/**
* fscrypt_prepare_symlink - prepare to create a possibly-encrypted symlink
* @dir: directory in which the symlink is being created
* @target: plaintext symlink target
* @len: length of @target excluding null terminator
* @max_len: space the filesystem has available to store the symlink target
* @disk_link: (out) the on-disk symlink target being prepared
*
* This function computes the size the symlink target will require on-disk,
* stores it in @disk_link->len, and validates it against @max_len. An
* encrypted symlink may be longer than the original.
*
* Additionally, @disk_link->name is set to @target if the symlink will be
* unencrypted, but left NULL if the symlink will be encrypted. For encrypted
* symlinks, the filesystem must call fscrypt_encrypt_symlink() to create the
* on-disk target later. (The reason for the two-step process is that some
* filesystems need to know the size of the symlink target before creating the
* inode, e.g. to determine whether it will be a "fast" or "slow" symlink.)
*
* Return: 0 on success, -ENAMETOOLONG if the symlink target is too long,
* -ENOKEY if the encryption key is missing, or another -errno code if a problem
* occurred while setting up the encryption key.
*/
static inline int fscrypt_prepare_symlink(struct inode *dir,
const char *target,
unsigned int len,
unsigned int max_len,
struct fscrypt_str *disk_link)
{
if (IS_ENCRYPTED(dir) || fscrypt_dummy_context_enabled(dir))
return __fscrypt_prepare_symlink(dir, len, max_len, disk_link);
disk_link->name = (unsigned char *)target;
disk_link->len = len + 1;
if (disk_link->len > max_len)
return -ENAMETOOLONG;
return 0;
}
/**
* fscrypt_encrypt_symlink - encrypt the symlink target if needed
* @inode: symlink inode
* @target: plaintext symlink target
* @len: length of @target excluding null terminator
* @disk_link: (in/out) the on-disk symlink target being prepared
*
* If the symlink target needs to be encrypted, then this function encrypts it
* into @disk_link->name. fscrypt_prepare_symlink() must have been called
* previously to compute @disk_link->len. If the filesystem did not allocate a
* buffer for @disk_link->name after calling fscrypt_prepare_link(), then one
* will be kmalloc()'ed and the filesystem will be responsible for freeing it.
*
* Return: 0 on success, -errno on failure
*/
static inline int fscrypt_encrypt_symlink(struct inode *inode,
const char *target,
unsigned int len,
struct fscrypt_str *disk_link)
{
if (IS_ENCRYPTED(inode))
return __fscrypt_encrypt_symlink(inode, target, len, disk_link);
return 0;
}
#endif /* _LINUX_FSCRYPT_H */