[SCSI] mpt fusion: Rescan SAS topology added
1.) SAS topology Rescan is added. If Firmware is doing Reset and we get
Device add interrupt from Firmware, we will not receive it as part of Reset
is going ON. After Reset we will do special Rescan of SAS topology.
2.) Driver version changed from 3.04.08 to 3.04.09.
Added proper lock/unlock in mptsas_not_responding_devices() as per James'
comment.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 8d1aadb..11fc8f3 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.08"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.08"
+#define MPT_LINUX_VERSION_COMMON "3.04.09"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.09"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -711,6 +711,7 @@
u16 hba_port_num_phy;
struct list_head sas_device_info_list;
struct mutex sas_device_info_mutex;
+ u8 old_sas_discovery_protocal;
u8 sas_discovery_quiesce_io;
int sas_index; /* index refrencing */
MPT_MGMT sas_mgmt;
@@ -741,6 +742,7 @@
spinlock_t fault_reset_work_lock;
u8 sg_addr_size;
+ u8 in_rescan;
u8 SGE_size;
} MPT_ADAPTER;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 7f2f76f..6aa9126 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -119,6 +119,8 @@
static void mptsas_expander_delete(MPT_ADAPTER *ioc,
struct mptsas_portinfo *port_info, u8 force);
static void mptsas_send_expander_event(struct fw_event_work *fw_event);
+static void mptsas_not_responding_devices(MPT_ADAPTER *ioc);
+static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc);
static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -844,6 +846,24 @@
mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
}
+static void
+mptsas_queue_rescan(MPT_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event;
+ int sz;
+
+ sz = offsetof(struct fw_event_work, event_data);
+ fw_event = kzalloc(sz, GFP_ATOMIC);
+ if (!fw_event) {
+ printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ fw_event->event = -1;
+ fw_event->ioc = ioc;
+ mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
/**
* mptsas_target_reset
@@ -1100,6 +1120,7 @@
complete(&ioc->sas_mgmt.done);
}
mptsas_cleanup_fw_event_q(ioc);
+ mptsas_queue_rescan(ioc);
mptsas_fw_event_on(ioc);
break;
default:
@@ -1406,6 +1427,23 @@
container_of(work, struct fw_event_work, work.work);
MPT_ADAPTER *ioc = fw_event->ioc;
+ /* special rescan topology handling */
+ if (fw_event->event == -1) {
+ if (ioc->in_rescan) {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: rescan ignored as it is in progress\n",
+ ioc->name, __func__));
+ return;
+ }
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
+ "reset\n", ioc->name, __func__));
+ ioc->in_rescan = 1;
+ mptsas_not_responding_devices(ioc);
+ mptsas_scan_sas_topology(ioc);
+ ioc->in_rescan = 0;
+ mptsas_free_fw_event(ioc, fw_event);
+ return;
+ }
/* events handling turned off during host reset */
if (ioc->fw_events_off) {
@@ -3153,8 +3191,15 @@
if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
- if (!port_info)
+ if (!port_info) {
+ if (ioc->old_sas_discovery_protocal) {
+ port_info = mptsas_expander_add(ioc,
+ le16_to_cpu(link_data->DevHandle));
+ if (port_info)
+ goto out;
+ }
goto out;
+ }
if (port_info == ioc->hba_port_info)
mptsas_probe_hba_phys(ioc);
@@ -3176,6 +3221,121 @@
mptsas_free_fw_event(ioc, fw_event);
}
+static void
+mptsas_not_responding_devices(MPT_ADAPTER *ioc)
+{
+ struct mptsas_portinfo buffer, *port_info;
+ struct mptsas_device_info *sas_info;
+ struct mptsas_devinfo sas_device;
+ u32 handle;
+ VirtTarget *vtarget = NULL;
+ struct mptsas_phyinfo *phy_info;
+ u8 found_expander;
+ int retval, retry_count;
+ unsigned long flags;
+
+ mpt_findImVolumes(ioc);
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: exiting due to a parallel reset \n", ioc->name,
+ __func__));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ /* devices, logical volumes */
+ mutex_lock(&ioc->sas_device_info_mutex);
+ redo_device_scan:
+ list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) {
+ sas_device.handle = 0;
+ retry_count = 0;
+retry_page:
+ retval = mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID
+ << MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (sas_info->fw.channel << 8) +
+ sas_info->fw.id);
+
+ if (sas_device.handle)
+ continue;
+ if (retval == -EBUSY) {
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc,
+ printk(MYIOC_s_DEBUG_FMT
+ "%s: exiting due to reset\n",
+ ioc->name, __func__));
+ spin_unlock_irqrestore
+ (&ioc->taskmgmt_lock, flags);
+ mutex_unlock(&ioc->sas_device_info_mutex);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+ flags);
+ }
+
+ if (retval && (retval != -ENODEV)) {
+ if (retry_count < 10) {
+ retry_count++;
+ goto retry_page;
+ } else {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Config page retry exceeded retry "
+ "count deleting device 0x%llx\n",
+ ioc->name, __func__,
+ sas_info->sas_address));
+ }
+ }
+
+ /* delete device */
+ vtarget = mptsas_find_vtarget(ioc,
+ sas_info->fw.channel, sas_info->fw.id);
+ if (vtarget)
+ vtarget->deleted = 1;
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_info->sas_address);
+ if (phy_info) {
+ mptsas_del_end_device(ioc, phy_info);
+ goto redo_device_scan;
+ }
+ }
+ mutex_unlock(&ioc->sas_device_info_mutex);
+
+ /* expanders */
+ mutex_lock(&ioc->sas_topology_mutex);
+ redo_expander_scan:
+ list_for_each_entry(port_info, &ioc->sas_topology, list) {
+
+ if (port_info->phy_info &&
+ (!(port_info->phy_info[0].identify.device_info &
+ MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+ continue;
+ found_expander = 0;
+ handle = 0xFFFF;
+ while (!mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) &&
+ !found_expander) {
+
+ handle = buffer.phy_info[0].handle;
+ if (buffer.phy_info[0].identify.sas_address ==
+ port_info->phy_info[0].identify.sas_address) {
+ found_expander = 1;
+ }
+ kfree(buffer.phy_info);
+ }
+
+ if (!found_expander) {
+ mptsas_expander_delete(ioc, port_info, 0);
+ goto redo_expander_scan;
+ }
+ }
+ mutex_lock(&ioc->sas_topology_mutex);
+}
+
/**
* mptsas_probe_expanders - adding expanders
* @ioc: Pointer to MPT_ADAPTER structure
@@ -3895,6 +4055,8 @@
MpiEventDataSasExpanderStatusChange_t *expander_data =
(MpiEventDataSasExpanderStatusChange_t *)reply->Data;
+ if (ioc->old_sas_discovery_protocal)
+ return 0;
if (expander_data->ReasonCode ==
MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING &&
@@ -3910,6 +4072,8 @@
discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus);
ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0;
+ if (ioc->old_sas_discovery_protocal && !discovery_status)
+ mptsas_queue_rescan(ioc);
return 0;
}
case MPI_EVENT_INTEGRATED_RAID:
@@ -4117,6 +4281,9 @@
goto out_mptsas_probe;
}
+ /* older firmware doesn't support expander events */
+ if ((ioc->facts.HeaderVersion >> 8) < 0xE)
+ ioc->old_sas_discovery_protocal = 1;
mptsas_scan_sas_topology(ioc);
mptsas_fw_event_on(ioc);
return 0;