[SCSI] mpt2sas: Added support for PCIe Advanced Error Recovery.
Added support in the driver to support EEH and
PCIe Advanced Error Recovery. This involves adding new
pci_error_handler interface for recovering the controller from PCI Bus
errors, such as SERR and PERR. Some tools are available for simulating
PCI errors in order to validate this interface:
http://www.kernel.org/pub/linux/utils/pci/aer-inject
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index f980b88..b04ccad 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -58,6 +58,7 @@
#include <linux/sort.h>
#include <linux/io.h>
#include <linux/time.h>
+#include <linux/aer.h>
#include "mpt2sas_base.h"
@@ -1256,6 +1257,9 @@
goto out_fail;
}
+ /* AER (Advanced Error Reporting) hooks */
+ pci_enable_pcie_error_reporting(pdev);
+
pci_set_master(pdev);
if (_base_config_dma_addressing(ioc, pdev) != 0) {
@@ -1311,6 +1315,7 @@
ioc->chip_phys = 0;
ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
return r;
}
@@ -3547,6 +3552,7 @@
ioc->pci_irq = -1;
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
return;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 1f0466a..bb5659c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -52,6 +52,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/aer.h>
#include <linux/raid_class.h>
#include <linux/slab.h>
@@ -6664,6 +6665,122 @@
}
#endif /* CONFIG_PM */
+/**
+ * _scsih_pci_error_detected - Called when a PCI error is detected.
+ * @pdev: PCI device struct
+ * @state: PCI channel state
+ *
+ * Description: Called when a PCI error is detected.
+ *
+ * Return value:
+ * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
+ */
+static pci_ers_result_t
+_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n",
+ ioc->name, state);
+
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ scsi_block_requests(ioc->shost);
+ mpt2sas_base_stop_watchdog(ioc);
+ mpt2sas_base_free_resources(ioc);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ _scsih_remove(pdev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * _scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * @pdev: PCI device struct
+ *
+ * Description: This routine is called by the pci error recovery
+ * code after the PCI slot has been reset, just before we
+ * should resume normal operations.
+ */
+static pci_ers_result_t
+_scsih_pci_slot_reset(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ int rc;
+
+ printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n",
+ ioc->name);
+
+ ioc->pdev = pdev;
+ rc = mpt2sas_base_map_resources(ioc);
+ if (rc)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+
+ rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+
+ printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name,
+ (rc == 0) ? "success" : "failed");
+
+ if (!rc)
+ return PCI_ERS_RESULT_RECOVERED;
+ else
+ return PCI_ERS_RESULT_DISCONNECT;
+}
+
+/**
+ * _scsih_pci_resume() - resume normal ops after PCI reset
+ * @pdev: pointer to PCI device
+ *
+ * Called when the error recovery driver tells us that its
+ * OK to resume normal operation. Use completion to allow
+ * halted scsi ops to resume.
+ */
+static void
+_scsih_pci_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name);
+
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ mpt2sas_base_start_watchdog(ioc);
+ scsi_unblock_requests(ioc->shost);
+}
+
+/**
+ * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * @pdev: pointer to PCI device
+ */
+static pci_ers_result_t
+_scsih_pci_mmio_enabled(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n",
+ ioc->name);
+
+ /* TODO - dump whatever for debugging purposes */
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static struct pci_error_handlers _scsih_err_handler = {
+ .error_detected = _scsih_pci_error_detected,
+ .mmio_enabled = _scsih_pci_mmio_enabled,
+ .slot_reset = _scsih_pci_slot_reset,
+ .resume = _scsih_pci_resume,
+};
static struct pci_driver scsih_driver = {
.name = MPT2SAS_DRIVER_NAME,
@@ -6671,6 +6788,7 @@
.probe = _scsih_probe,
.remove = __devexit_p(_scsih_remove),
.shutdown = _scsih_shutdown,
+ .err_handler = &_scsih_err_handler,
#ifdef CONFIG_PM
.suspend = _scsih_suspend,
.resume = _scsih_resume,