Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon subsystem fixes from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (ntc_thermistor) Fix OF device ID mapping
hwmon: (ntc_thermistor) Fix dependencies
hwmon: Document temp[1-*]_min_hyst sysfs attribute
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 79f8257..2cc95ad 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -327,6 +327,13 @@
from the max value.
RW
+temp[1-*]_min_hyst
+ Temperature hysteresis value for min limit.
+ Unit: millidegree Celsius
+ Must be reported as an absolute temperature, NOT a delta
+ from the min value.
+ RW
+
temp[1-*]_input Temperature input value.
Unit: millidegree Celsius
RO
@@ -362,6 +369,13 @@
Unit: millidegree Celsius
RW
+temp[1-*]_lcrit_hyst
+ Temperature hysteresis value for critical min limit.
+ Unit: millidegree Celsius
+ Must be reported as an absolute temperature, NOT a delta
+ from the critical min value.
+ RW
+
temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bc196f4..4af0da9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1053,7 +1053,7 @@
config SENSORS_NTC_THERMISTOR
tristate "NTC thermistor support"
- depends on (!OF && !IIO) || (OF && IIO)
+ depends on !OF || IIO=n || IIO
help
This driver supports NTC thermistors sensor reading and its
interpretation. The driver can also monitor the temperature and
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 8a17f01..e76feb86 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -44,6 +44,7 @@
unsigned int ohm;
};
+/* Order matters, ntc_match references the entries by index */
static const struct platform_device_id ntc_thermistor_id[] = {
{ "ncp15wb473", TYPE_NCPXXWB473 },
{ "ncp18wb473", TYPE_NCPXXWB473 },
@@ -141,7 +142,7 @@
char name[PLATFORM_NAME_SIZE];
};
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
{
struct iio_channel *channel = pdata->chan;
@@ -163,15 +164,15 @@
static const struct of_device_id ntc_match[] = {
{ .compatible = "ntc,ncp15wb473",
- .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
+ .data = &ntc_thermistor_id[0] },
{ .compatible = "ntc,ncp18wb473",
- .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
+ .data = &ntc_thermistor_id[1] },
{ .compatible = "ntc,ncp21wb473",
- .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
+ .data = &ntc_thermistor_id[2] },
{ .compatible = "ntc,ncp03wb473",
- .data = &ntc_thermistor_id[TYPE_NCPXXWB473] },
+ .data = &ntc_thermistor_id[3] },
{ .compatible = "ntc,ncp15wl333",
- .data = &ntc_thermistor_id[TYPE_NCPXXWL333] },
+ .data = &ntc_thermistor_id[4] },
{ },
};
MODULE_DEVICE_TABLE(of, ntc_match);
@@ -223,6 +224,8 @@
return NULL;
}
+#define ntc_match NULL
+
static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata)
{ }
#endif