| /* |
| * linux/drivers/scsi/ide-scsi.c Version 0.9 Jul 4, 1999 |
| * |
| * Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il> |
| */ |
| |
| /* |
| * Emulation of a SCSI host adapter for IDE ATAPI devices. |
| * |
| * With this driver, one can use the Linux SCSI drivers instead of the |
| * native IDE ATAPI drivers. |
| * |
| * Ver 0.1 Dec 3 96 Initial version. |
| * Ver 0.2 Jan 26 97 Fixed bug in cleanup_module() and added emulation |
| * of MODE_SENSE_6/MODE_SELECT_6 for cdroms. Thanks |
| * to Janos Farkas for pointing this out. |
| * Avoid using bitfields in structures for m68k. |
| * Added Scatter/Gather and DMA support. |
| * Ver 0.4 Dec 7 97 Add support for ATAPI PD/CD drives. |
| * Use variable timeout for each command. |
| * Ver 0.5 Jan 2 98 Fix previous PD/CD support. |
| * Allow disabling of SCSI-6 to SCSI-10 transformation. |
| * Ver 0.6 Jan 27 98 Allow disabling of SCSI command translation layer |
| * for access through /dev/sg. |
| * Fix MODE_SENSE_6/MODE_SELECT_6/INQUIRY translation. |
| * Ver 0.7 Dec 04 98 Ignore commands where lun != 0 to avoid multiple |
| * detection of devices with CONFIG_SCSI_MULTI_LUN |
| * Ver 0.8 Feb 05 99 Optical media need translation too. Reverse 0.7. |
| * Ver 0.9 Jul 04 99 Fix a bug in SG_SET_TRANSFORM. |
| * Ver 0.91 Jun 10 02 Fix "off by one" error in transforms |
| * Ver 0.92 Dec 31 02 Implement new SCSI mid level API |
| */ |
| |
| #define IDESCSI_VERSION "0.92" |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/ioport.h> |
| #include <linux/blkdev.h> |
| #include <linux/errno.h> |
| #include <linux/hdreg.h> |
| #include <linux/slab.h> |
| #include <linux/ide.h> |
| #include <linux/scatterlist.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| |
| #include <asm/io.h> |
| #include <asm/bitops.h> |
| #include <asm/uaccess.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/sg.h> |
| |
| #define IDESCSI_DEBUG_LOG 0 |
| |
| typedef struct idescsi_pc_s { |
| u8 c[12]; /* Actual packet bytes */ |
| int request_transfer; /* Bytes to transfer */ |
| int actually_transferred; /* Bytes actually transferred */ |
| int buffer_size; /* Size of our data buffer */ |
| struct request *rq; /* The corresponding request */ |
| u8 *buffer; /* Data buffer */ |
| u8 *current_position; /* Pointer into the above buffer */ |
| struct scatterlist *sg; /* Scatter gather table */ |
| unsigned int sg_cnt; /* Number of entries in sg */ |
| int b_count; /* Bytes transferred from current entry */ |
| struct scsi_cmnd *scsi_cmd; /* SCSI command */ |
| void (*done)(struct scsi_cmnd *); /* Scsi completion routine */ |
| unsigned long flags; /* Status/Action flags */ |
| unsigned long timeout; /* Command timeout */ |
| } idescsi_pc_t; |
| |
| /* |
| * Packet command status bits. |
| */ |
| #define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */ |
| #define PC_WRITING 1 /* Data direction */ |
| #define PC_TIMEDOUT 3 /* command timed out */ |
| #define PC_DMA_OK 4 /* Use DMA */ |
| |
| /* |
| * SCSI command transformation layer |
| */ |
| #define IDESCSI_SG_TRANSFORM 1 /* /dev/sg transformation */ |
| |
| /* |
| * Log flags |
| */ |
| #define IDESCSI_LOG_CMD 0 /* Log SCSI commands */ |
| |
| typedef struct ide_scsi_obj { |
| ide_drive_t *drive; |
| ide_driver_t *driver; |
| struct gendisk *disk; |
| struct Scsi_Host *host; |
| |
| idescsi_pc_t *pc; /* Current packet command */ |
| unsigned long flags; /* Status/Action flags */ |
| unsigned long transform; /* SCSI cmd translation layer */ |
| unsigned long log; /* log flags */ |
| } idescsi_scsi_t; |
| |
| static DEFINE_MUTEX(idescsi_ref_mutex); |
| static int idescsi_nocd; /* Set by module param to skip cd */ |
| |
| #define ide_scsi_g(disk) \ |
| container_of((disk)->private_data, struct ide_scsi_obj, driver) |
| |
| static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk) |
| { |
| struct ide_scsi_obj *scsi = NULL; |
| |
| mutex_lock(&idescsi_ref_mutex); |
| scsi = ide_scsi_g(disk); |
| if (scsi) |
| scsi_host_get(scsi->host); |
| mutex_unlock(&idescsi_ref_mutex); |
| return scsi; |
| } |
| |
| static void ide_scsi_put(struct ide_scsi_obj *scsi) |
| { |
| mutex_lock(&idescsi_ref_mutex); |
| scsi_host_put(scsi->host); |
| mutex_unlock(&idescsi_ref_mutex); |
| } |
| |
| static inline idescsi_scsi_t *scsihost_to_idescsi(struct Scsi_Host *host) |
| { |
| return (idescsi_scsi_t*) (&host[1]); |
| } |
| |
| static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) |
| { |
| return scsihost_to_idescsi(ide_drive->driver_data); |
| } |
| |
| /* |
| * Per ATAPI device status bits. |
| */ |
| #define IDESCSI_DRQ_INTERRUPT 0 /* DRQ interrupt device */ |
| |
| /* |
| * ide-scsi requests. |
| */ |
| #define IDESCSI_PC_RQ 90 |
| |
| static void idescsi_discard_data (ide_drive_t *drive, unsigned int bcount) |
| { |
| while (bcount--) |
| (void) HWIF(drive)->INB(IDE_DATA_REG); |
| } |
| |
| static void idescsi_output_zeros (ide_drive_t *drive, unsigned int bcount) |
| { |
| while (bcount--) |
| HWIF(drive)->OUTB(0, IDE_DATA_REG); |
| } |
| |
| /* |
| * PIO data transfer routines using the scatter gather table. |
| */ |
| static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) |
| { |
| int count; |
| char *buf; |
| |
| while (bcount) { |
| count = min(pc->sg->length - pc->b_count, bcount); |
| if (PageHighMem(pc->sg->page)) { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| buf = kmap_atomic(pc->sg->page, KM_IRQ0) + |
| pc->sg->offset; |
| drive->hwif->atapi_input_bytes(drive, |
| buf + pc->b_count, count); |
| kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); |
| local_irq_restore(flags); |
| } else { |
| buf = page_address(pc->sg->page) + pc->sg->offset; |
| drive->hwif->atapi_input_bytes(drive, |
| buf + pc->b_count, count); |
| } |
| bcount -= count; pc->b_count += count; |
| if (pc->b_count == pc->sg->length) { |
| if (!--pc->sg_cnt) |
| break; |
| pc->sg = sg_next(pc->sg); |
| pc->b_count = 0; |
| } |
| } |
| |
| if (bcount) { |
| printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n"); |
| idescsi_discard_data (drive, bcount); |
| } |
| } |
| |
| static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) |
| { |
| int count; |
| char *buf; |
| |
| while (bcount) { |
| count = min(pc->sg->length - pc->b_count, bcount); |
| if (PageHighMem(pc->sg->page)) { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| buf = kmap_atomic(pc->sg->page, KM_IRQ0) + |
| pc->sg->offset; |
| drive->hwif->atapi_output_bytes(drive, |
| buf + pc->b_count, count); |
| kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); |
| local_irq_restore(flags); |
| } else { |
| buf = page_address(pc->sg->page) + pc->sg->offset; |
| drive->hwif->atapi_output_bytes(drive, |
| buf + pc->b_count, count); |
| } |
| bcount -= count; pc->b_count += count; |
| if (pc->b_count == pc->sg->length) { |
| if (!--pc->sg_cnt) |
| break; |
| pc->sg = sg_next(pc->sg); |
| pc->b_count = 0; |
| } |
| } |
| |
| if (bcount) { |
| printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n"); |
| idescsi_output_zeros (drive, bcount); |
| } |
| } |
| |
| static void hexdump(u8 *x, int len) |
| { |
| int i; |
| |
| printk("[ "); |
| for (i = 0; i < len; i++) |
| printk("%x ", x[i]); |
| printk("]\n"); |
| } |
| |
| static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| idescsi_pc_t *pc; |
| struct request *rq; |
| u8 *buf; |
| |
| /* stuff a sense request in front of our current request */ |
| pc = kzalloc(sizeof(idescsi_pc_t), GFP_ATOMIC); |
| rq = kmalloc(sizeof(struct request), GFP_ATOMIC); |
| buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC); |
| if (!pc || !rq || !buf) { |
| kfree(buf); |
| kfree(rq); |
| kfree(pc); |
| return -ENOMEM; |
| } |
| ide_init_drive_cmd(rq); |
| rq->special = (char *) pc; |
| pc->rq = rq; |
| pc->buffer = buf; |
| pc->c[0] = REQUEST_SENSE; |
| pc->c[4] = pc->request_transfer = pc->buffer_size = SCSI_SENSE_BUFFERSIZE; |
| rq->cmd_type = REQ_TYPE_SENSE; |
| pc->timeout = jiffies + WAIT_READY; |
| /* NOTE! Save the failed packet command in "rq->buffer" */ |
| rq->buffer = (void *) failed_command->special; |
| pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { |
| printk ("ide-scsi: %s: queue cmd = ", drive->name); |
| hexdump(pc->c, 6); |
| } |
| rq->rq_disk = scsi->disk; |
| return ide_do_drive_cmd(drive, rq, ide_preempt); |
| } |
| |
| static int idescsi_end_request(ide_drive_t *, int, int); |
| |
| static ide_startstop_t |
| idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) |
| { |
| if (HWIF(drive)->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) |
| /* force an abort */ |
| HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG); |
| |
| rq->errors++; |
| |
| idescsi_end_request(drive, 0, 0); |
| |
| return ide_stopped; |
| } |
| |
| static ide_startstop_t |
| idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) |
| { |
| #if IDESCSI_DEBUG_LOG |
| printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n", |
| ((idescsi_pc_t *) rq->special)->scsi_cmd->serial_number); |
| #endif |
| rq->errors |= ERROR_MAX; |
| |
| idescsi_end_request(drive, 0, 0); |
| |
| return ide_stopped; |
| } |
| |
| static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| struct request *rq = HWGROUP(drive)->rq; |
| idescsi_pc_t *pc = (idescsi_pc_t *) rq->special; |
| int log = test_bit(IDESCSI_LOG_CMD, &scsi->log); |
| struct Scsi_Host *host; |
| int errors = rq->errors; |
| unsigned long flags; |
| |
| if (!blk_special_request(rq) && !blk_sense_request(rq)) { |
| ide_end_request(drive, uptodate, nrsecs); |
| return 0; |
| } |
| ide_end_drive_cmd (drive, 0, 0); |
| if (blk_sense_request(rq)) { |
| idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; |
| if (log) { |
| printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); |
| hexdump(pc->buffer,16); |
| } |
| memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); |
| kfree(pc->buffer); |
| kfree(pc); |
| kfree(rq); |
| pc = opc; |
| rq = pc->rq; |
| pc->scsi_cmd->result = (CHECK_CONDITION << 1) | |
| ((test_bit(PC_TIMEDOUT, &pc->flags)?DID_TIME_OUT:DID_OK) << 16); |
| } else if (test_bit(PC_TIMEDOUT, &pc->flags)) { |
| if (log) |
| printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n", |
| drive->name, pc->scsi_cmd->serial_number); |
| pc->scsi_cmd->result = DID_TIME_OUT << 16; |
| } else if (errors >= ERROR_MAX) { |
| pc->scsi_cmd->result = DID_ERROR << 16; |
| if (log) |
| printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number); |
| } else if (errors) { |
| if (log) |
| printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number); |
| if (!idescsi_check_condition(drive, rq)) |
| /* we started a request sense, so we'll be back, exit for now */ |
| return 0; |
| pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16); |
| } else { |
| pc->scsi_cmd->result = DID_OK << 16; |
| } |
| host = pc->scsi_cmd->device->host; |
| spin_lock_irqsave(host->host_lock, flags); |
| pc->done(pc->scsi_cmd); |
| spin_unlock_irqrestore(host->host_lock, flags); |
| kfree(pc); |
| kfree(rq); |
| scsi->pc = NULL; |
| return 0; |
| } |
| |
| static inline unsigned long get_timeout(idescsi_pc_t *pc) |
| { |
| return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); |
| } |
| |
| static int idescsi_expiry(ide_drive_t *drive) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| idescsi_pc_t *pc = scsi->pc; |
| |
| #if IDESCSI_DEBUG_LOG |
| printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); |
| #endif |
| set_bit(PC_TIMEDOUT, &pc->flags); |
| |
| return 0; /* we do not want the ide subsystem to retry */ |
| } |
| |
| /* |
| * Our interrupt handler. |
| */ |
| static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| idescsi_pc_t *pc=scsi->pc; |
| struct request *rq = pc->rq; |
| atapi_bcount_t bcount; |
| atapi_status_t status; |
| atapi_ireason_t ireason; |
| atapi_feature_t feature; |
| |
| unsigned int temp; |
| |
| #if IDESCSI_DEBUG_LOG |
| printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); |
| #endif /* IDESCSI_DEBUG_LOG */ |
| |
| if (test_bit(PC_TIMEDOUT, &pc->flags)){ |
| #if IDESCSI_DEBUG_LOG |
| printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n", |
| pc->scsi_cmd->serial_number, jiffies); |
| #endif |
| /* end this request now - scsi should retry it*/ |
| idescsi_end_request (drive, 1, 0); |
| return ide_stopped; |
| } |
| if (test_and_clear_bit (PC_DMA_IN_PROGRESS, &pc->flags)) { |
| #if IDESCSI_DEBUG_LOG |
| printk ("ide-scsi: %s: DMA complete\n", drive->name); |
| #endif /* IDESCSI_DEBUG_LOG */ |
| pc->actually_transferred=pc->request_transfer; |
| (void) HWIF(drive)->ide_dma_end(drive); |
| } |
| |
| feature.all = 0; |
| /* Clear the interrupt */ |
| status.all = HWIF(drive)->INB(IDE_STATUS_REG); |
| |
| if (!status.b.drq) { |
| /* No more interrupts */ |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) |
| printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); |
| local_irq_enable_in_hardirq(); |
| if (status.b.check) |
| rq->errors++; |
| idescsi_end_request (drive, 1, 0); |
| return ide_stopped; |
| } |
| bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG); |
| bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG); |
| ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); |
| |
| if (ireason.b.cod) { |
| printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); |
| return ide_do_reset (drive); |
| } |
| if (ireason.b.io) { |
| temp = pc->actually_transferred + bcount.all; |
| if (temp > pc->request_transfer) { |
| if (temp > pc->buffer_size) { |
| printk(KERN_ERR "ide-scsi: The scsi wants to " |
| "send us more data than expected " |
| "- discarding data\n"); |
| temp = pc->buffer_size - pc->actually_transferred; |
| if (temp) { |
| clear_bit(PC_WRITING, &pc->flags); |
| if (pc->sg) |
| idescsi_input_buffers(drive, pc, temp); |
| else |
| drive->hwif->atapi_input_bytes(drive, pc->current_position, temp); |
| printk(KERN_ERR "ide-scsi: transferred %d of %d bytes\n", temp, bcount.all); |
| } |
| pc->actually_transferred += temp; |
| pc->current_position += temp; |
| idescsi_discard_data(drive, bcount.all - temp); |
| ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); |
| return ide_started; |
| } |
| #if IDESCSI_DEBUG_LOG |
| printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); |
| #endif /* IDESCSI_DEBUG_LOG */ |
| } |
| } |
| if (ireason.b.io) { |
| clear_bit(PC_WRITING, &pc->flags); |
| if (pc->sg) |
| idescsi_input_buffers(drive, pc, bcount.all); |
| else |
| HWIF(drive)->atapi_input_bytes(drive, pc->current_position, bcount.all); |
| } else { |
| set_bit(PC_WRITING, &pc->flags); |
| if (pc->sg) |
| idescsi_output_buffers (drive, pc, bcount.all); |
| else |
| HWIF(drive)->atapi_output_bytes(drive, pc->current_position, bcount.all); |
| } |
| /* Update the current position */ |
| pc->actually_transferred += bcount.all; |
| pc->current_position += bcount.all; |
| |
| /* And set the interrupt handler again */ |
| ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); |
| return ide_started; |
| } |
| |
| static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| idescsi_pc_t *pc = scsi->pc; |
| atapi_ireason_t ireason; |
| ide_startstop_t startstop; |
| |
| if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { |
| printk(KERN_ERR "ide-scsi: Strange, packet command " |
| "initiated yet DRQ isn't asserted\n"); |
| return startstop; |
| } |
| ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); |
| if (!ireason.b.cod || ireason.b.io) { |
| printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " |
| "issuing a packet command\n"); |
| return ide_do_reset (drive); |
| } |
| BUG_ON(HWGROUP(drive)->handler != NULL); |
| /* Set the interrupt routine */ |
| ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); |
| /* Send the actual packet */ |
| drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12); |
| if (test_bit (PC_DMA_OK, &pc->flags)) { |
| set_bit (PC_DMA_IN_PROGRESS, &pc->flags); |
| hwif->dma_start(drive); |
| } |
| return ide_started; |
| } |
| |
| static inline int idescsi_set_direction(idescsi_pc_t *pc) |
| { |
| switch (pc->c[0]) { |
| case READ_6: case READ_10: case READ_12: |
| clear_bit(PC_WRITING, &pc->flags); |
| return 0; |
| case WRITE_6: case WRITE_10: case WRITE_12: |
| set_bit(PC_WRITING, &pc->flags); |
| return 0; |
| default: |
| return 1; |
| } |
| } |
| |
| static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct scatterlist *sg, *scsi_sg; |
| int segments; |
| |
| if (!pc->request_transfer || pc->request_transfer % 1024) |
| return 1; |
| |
| if (idescsi_set_direction(pc)) |
| return 1; |
| |
| sg = hwif->sg_table; |
| scsi_sg = scsi_sglist(pc->scsi_cmd); |
| segments = scsi_sg_count(pc->scsi_cmd); |
| |
| if (segments > hwif->sg_max_nents) |
| return 1; |
| |
| hwif->sg_nents = segments; |
| memcpy(sg, scsi_sg, sizeof(*sg) * segments); |
| |
| return 0; |
| } |
| |
| /* |
| * Issue a packet command |
| */ |
| static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| ide_hwif_t *hwif = drive->hwif; |
| atapi_feature_t feature; |
| atapi_bcount_t bcount; |
| |
| scsi->pc=pc; /* Set the current packet command */ |
| pc->actually_transferred=0; /* We haven't transferred any data yet */ |
| pc->current_position=pc->buffer; |
| bcount.all = min(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */ |
| |
| feature.all = 0; |
| if (drive->using_dma && !idescsi_map_sg(drive, pc)) { |
| hwif->sg_mapped = 1; |
| feature.b.dma = !hwif->dma_setup(drive); |
| hwif->sg_mapped = 0; |
| } |
| |
| SELECT_DRIVE(drive); |
| if (IDE_CONTROL_REG) |
| HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); |
| |
| HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG); |
| HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); |
| HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); |
| |
| if (feature.b.dma) |
| set_bit(PC_DMA_OK, &pc->flags); |
| |
| if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { |
| BUG_ON(HWGROUP(drive)->handler != NULL); |
| ide_set_handler(drive, &idescsi_transfer_pc, |
| get_timeout(pc), idescsi_expiry); |
| /* Issue the packet command */ |
| HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); |
| return ide_started; |
| } else { |
| /* Issue the packet command */ |
| HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); |
| return idescsi_transfer_pc(drive); |
| } |
| } |
| |
| /* |
| * idescsi_do_request is our request handling function. |
| */ |
| static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) |
| { |
| #if IDESCSI_DEBUG_LOG |
| printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors); |
| printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); |
| #endif /* IDESCSI_DEBUG_LOG */ |
| |
| if (blk_sense_request(rq) || blk_special_request(rq)) { |
| return idescsi_issue_pc (drive, (idescsi_pc_t *) rq->special); |
| } |
| blk_dump_rq_flags(rq, "ide-scsi: unsup command"); |
| idescsi_end_request (drive, 0, 0); |
| return ide_stopped; |
| } |
| |
| #ifdef CONFIG_IDE_PROC_FS |
| static void idescsi_add_settings(ide_drive_t *drive) |
| { |
| idescsi_scsi_t *scsi = drive_to_idescsi(drive); |
| |
| /* |
| * drive setting name read/write data type min max mul_factor div_factor data pointer set function |
| */ |
| ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); |
| ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); |
| ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); |
| ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); |
| ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); |
| } |
| #else |
| static inline void idescsi_add_settings(ide_drive_t *drive) { ; } |
| #endif |
| |
| /* |
| * Driver initialization. |
| */ |
| static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) |
| { |
| if (drive->id && (drive->id->config & 0x0060) == 0x20) |
| set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags); |
| clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); |
| #if IDESCSI_DEBUG_LOG |
| set_bit(IDESCSI_LOG_CMD, &scsi->log); |
| #endif /* IDESCSI_DEBUG_LOG */ |
| idescsi_add_settings(drive); |
| } |
| |
| static void ide_scsi_remove(ide_drive_t *drive) |
| { |
| struct Scsi_Host *scsihost = drive->driver_data; |
| struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); |
| struct gendisk *g = scsi->disk; |
| |
| scsi_remove_host(scsihost); |
| ide_proc_unregister_driver(drive, scsi->driver); |
| |
| ide_unregister_region(g); |
| |
| drive->driver_data = NULL; |
| g->private_data = NULL; |
| put_disk(g); |
| |
| ide_scsi_put(scsi); |
| } |
| |
| static int ide_scsi_probe(ide_drive_t *); |
| |
| #ifdef CONFIG_IDE_PROC_FS |
| static ide_proc_entry_t idescsi_proc[] = { |
| { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, |
| { NULL, 0, NULL, NULL } |
| }; |
| #endif |
| |
| static ide_driver_t idescsi_driver = { |
| .gen_driver = { |
| .owner = THIS_MODULE, |
| .name = "ide-scsi", |
| .bus = &ide_bus_type, |
| }, |
| .probe = ide_scsi_probe, |
| .remove = ide_scsi_remove, |
| .version = IDESCSI_VERSION, |
| .media = ide_scsi, |
| .supports_dsc_overlap = 0, |
| .do_request = idescsi_do_request, |
| .end_request = idescsi_end_request, |
| .error = idescsi_atapi_error, |
| .abort = idescsi_atapi_abort, |
| #ifdef CONFIG_IDE_PROC_FS |
| .proc = idescsi_proc, |
| #endif |
| }; |
| |
| static int idescsi_ide_open(struct inode *inode, struct file *filp) |
| { |
| struct gendisk *disk = inode->i_bdev->bd_disk; |
| struct ide_scsi_obj *scsi; |
| |
| if (!(scsi = ide_scsi_get(disk))) |
| return -ENXIO; |
| |
| return 0; |
| } |
| |
| static int idescsi_ide_release(struct inode *inode, struct file *filp) |
| { |
| struct gendisk *disk = inode->i_bdev->bd_disk; |
| struct ide_scsi_obj *scsi = ide_scsi_g(disk); |
| |
| ide_scsi_put(scsi); |
| |
| return 0; |
| } |
| |
| static int idescsi_ide_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct block_device *bdev = inode->i_bdev; |
| struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk); |
| return generic_ide_ioctl(scsi->drive, file, bdev, cmd, arg); |
| } |
| |
| static struct block_device_operations idescsi_ops = { |
| .owner = THIS_MODULE, |
| .open = idescsi_ide_open, |
| .release = idescsi_ide_release, |
| .ioctl = idescsi_ide_ioctl, |
| }; |
| |
| static int idescsi_slave_configure(struct scsi_device * sdp) |
| { |
| /* Configure detected device */ |
| sdp->use_10_for_rw = 1; |
| sdp->use_10_for_ms = 1; |
| scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun); |
| return 0; |
| } |
| |
| static const char *idescsi_info (struct Scsi_Host *host) |
| { |
| return "SCSI host adapter emulation for IDE ATAPI devices"; |
| } |
| |
| static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg) |
| { |
| idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host); |
| |
| if (cmd == SG_SET_TRANSFORM) { |
| if (arg) |
| set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); |
| else |
| clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform); |
| return 0; |
| } else if (cmd == SG_GET_TRANSFORM) |
| return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg); |
| return -EINVAL; |
| } |
| |
| static int idescsi_queue (struct scsi_cmnd *cmd, |
| void (*done)(struct scsi_cmnd *)) |
| { |
| struct Scsi_Host *host = cmd->device->host; |
| idescsi_scsi_t *scsi = scsihost_to_idescsi(host); |
| ide_drive_t *drive = scsi->drive; |
| struct request *rq = NULL; |
| idescsi_pc_t *pc = NULL; |
| |
| if (!drive) { |
| scmd_printk (KERN_ERR, cmd, "drive not present\n"); |
| goto abort; |
| } |
| scsi = drive_to_idescsi(drive); |
| pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC); |
| rq = kmalloc (sizeof (struct request), GFP_ATOMIC); |
| if (rq == NULL || pc == NULL) { |
| printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name); |
| goto abort; |
| } |
| |
| memset (pc->c, 0, 12); |
| pc->flags = 0; |
| pc->rq = rq; |
| memcpy (pc->c, cmd->cmnd, cmd->cmd_len); |
| pc->buffer = NULL; |
| pc->sg = scsi_sglist(cmd); |
| pc->sg_cnt = scsi_sg_count(cmd); |
| pc->b_count = 0; |
| pc->request_transfer = pc->buffer_size = scsi_bufflen(cmd); |
| pc->scsi_cmd = cmd; |
| pc->done = done; |
| pc->timeout = jiffies + cmd->timeout_per_command; |
| |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { |
| printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); |
| hexdump(cmd->cmnd, cmd->cmd_len); |
| if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { |
| printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); |
| hexdump(pc->c, 12); |
| } |
| } |
| |
| ide_init_drive_cmd (rq); |
| rq->special = (char *) pc; |
| rq->cmd_type = REQ_TYPE_SPECIAL; |
| spin_unlock_irq(host->host_lock); |
| rq->rq_disk = scsi->disk; |
| (void) ide_do_drive_cmd (drive, rq, ide_end); |
| spin_lock_irq(host->host_lock); |
| return 0; |
| abort: |
| kfree (pc); |
| kfree (rq); |
| cmd->result = DID_ERROR << 16; |
| done(cmd); |
| return 0; |
| } |
| |
| static int idescsi_eh_abort (struct scsi_cmnd *cmd) |
| { |
| idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); |
| ide_drive_t *drive = scsi->drive; |
| int busy; |
| int ret = FAILED; |
| |
| /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */ |
| |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) |
| printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number); |
| |
| if (!drive) { |
| printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n"); |
| WARN_ON(1); |
| goto no_drive; |
| } |
| |
| /* First give it some more time, how much is "right" is hard to say :-( */ |
| |
| busy = ide_wait_not_busy(HWIF(drive), 100); /* FIXME - uses mdelay which causes latency? */ |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) |
| printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":""); |
| |
| spin_lock_irq(&ide_lock); |
| |
| /* If there is no pc running we're done (our interrupt took care of it) */ |
| if (!scsi->pc) { |
| ret = SUCCESS; |
| goto ide_unlock; |
| } |
| |
| /* It's somewhere in flight. Does ide subsystem agree? */ |
| if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy && |
| elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) { |
| /* |
| * FIXME - not sure this condition can ever occur |
| */ |
| printk (KERN_ERR "ide-scsi: cmd aborted!\n"); |
| |
| if (blk_sense_request(scsi->pc->rq)) |
| kfree(scsi->pc->buffer); |
| kfree(scsi->pc->rq); |
| kfree(scsi->pc); |
| scsi->pc = NULL; |
| |
| ret = SUCCESS; |
| } |
| |
| ide_unlock: |
| spin_unlock_irq(&ide_lock); |
| no_drive: |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) |
| printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed"); |
| |
| return ret; |
| } |
| |
| static int idescsi_eh_reset (struct scsi_cmnd *cmd) |
| { |
| struct request *req; |
| idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host); |
| ide_drive_t *drive = scsi->drive; |
| int ready = 0; |
| int ret = SUCCESS; |
| |
| /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */ |
| |
| if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) |
| printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number); |
| |
| if (!drive) { |
| printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n"); |
| WARN_ON(1); |
| return FAILED; |
| } |
| |
| spin_lock_irq(cmd->device->host->host_lock); |
| spin_lock(&ide_lock); |
| |
| if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) { |
| printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n"); |
| spin_unlock(&ide_lock); |
| spin_unlock_irq(cmd->device->host->host_lock); |
| return FAILED; |
| } |
| |
| /* kill current request */ |
| blkdev_dequeue_request(req); |
| end_that_request_last(req, 0); |
| if (blk_sense_request(req)) |
| kfree(scsi->pc->buffer); |
| kfree(scsi->pc); |
| scsi->pc = NULL; |
| kfree(req); |
| |
| /* now nuke the drive queue */ |
| while ((req = elv_next_request(drive->queue))) { |
| blkdev_dequeue_request(req); |
| end_that_request_last(req, 0); |
| } |
| |
| HWGROUP(drive)->rq = NULL; |
| HWGROUP(drive)->handler = NULL; |
| HWGROUP(drive)->busy = 1; /* will set this to zero when ide reset finished */ |
| spin_unlock(&ide_lock); |
| |
| ide_do_reset(drive); |
| |
| /* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */ |
| |
| do { |
| spin_unlock_irq(cmd->device->host->host_lock); |
| msleep(50); |
| spin_lock_irq(cmd->device->host->host_lock); |
| } while ( HWGROUP(drive)->handler ); |
| |
| ready = drive_is_ready(drive); |
| HWGROUP(drive)->busy--; |
| if (!ready) { |
| printk (KERN_ERR "ide-scsi: reset failed!\n"); |
| ret = FAILED; |
| } |
| |
| spin_unlock_irq(cmd->device->host->host_lock); |
| return ret; |
| } |
| |
| static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev, |
| sector_t capacity, int *parm) |
| { |
| idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host); |
| ide_drive_t *drive = idescsi->drive; |
| |
| if (drive->bios_cyl && drive->bios_head && drive->bios_sect) { |
| parm[0] = drive->bios_head; |
| parm[1] = drive->bios_sect; |
| parm[2] = drive->bios_cyl; |
| } |
| return 0; |
| } |
| |
| static struct scsi_host_template idescsi_template = { |
| .module = THIS_MODULE, |
| .name = "idescsi", |
| .info = idescsi_info, |
| .slave_configure = idescsi_slave_configure, |
| .ioctl = idescsi_ioctl, |
| .queuecommand = idescsi_queue, |
| .eh_abort_handler = idescsi_eh_abort, |
| .eh_host_reset_handler = idescsi_eh_reset, |
| .bios_param = idescsi_bios, |
| .can_queue = 40, |
| .this_id = -1, |
| .sg_tablesize = 256, |
| .cmd_per_lun = 5, |
| .max_sectors = 128, |
| .use_clustering = DISABLE_CLUSTERING, |
| .emulated = 1, |
| .proc_name = "ide-scsi", |
| }; |
| |
| static int ide_scsi_probe(ide_drive_t *drive) |
| { |
| idescsi_scsi_t *idescsi; |
| struct Scsi_Host *host; |
| struct gendisk *g; |
| static int warned; |
| int err = -ENOMEM; |
| |
| if (!warned && drive->media == ide_cdrom) { |
| printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n"); |
| warned = 1; |
| } |
| |
| if (idescsi_nocd && drive->media == ide_cdrom) |
| return -ENODEV; |
| |
| if (!strstr("ide-scsi", drive->driver_req) || |
| !drive->present || |
| drive->media == ide_disk || |
| !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) |
| return -ENODEV; |
| |
| g = alloc_disk(1 << PARTN_BITS); |
| if (!g) |
| goto out_host_put; |
| |
| ide_init_disk(g, drive); |
| |
| host->max_id = 1; |
| |
| #if IDESCSI_DEBUG_LOG |
| if (drive->id->last_lun) |
| printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun); |
| #endif |
| if ((drive->id->last_lun & 0x7) != 7) |
| host->max_lun = (drive->id->last_lun & 0x7) + 1; |
| else |
| host->max_lun = 1; |
| |
| drive->driver_data = host; |
| idescsi = scsihost_to_idescsi(host); |
| idescsi->drive = drive; |
| idescsi->driver = &idescsi_driver; |
| idescsi->host = host; |
| idescsi->disk = g; |
| g->private_data = &idescsi->driver; |
| ide_proc_register_driver(drive, &idescsi_driver); |
| err = 0; |
| idescsi_setup(drive, idescsi); |
| g->fops = &idescsi_ops; |
| ide_register_region(g); |
| err = scsi_add_host(host, &drive->gendev); |
| if (!err) { |
| scsi_scan_host(host); |
| return 0; |
| } |
| /* fall through on error */ |
| ide_unregister_region(g); |
| ide_proc_unregister_driver(drive, &idescsi_driver); |
| |
| put_disk(g); |
| out_host_put: |
| scsi_host_put(host); |
| return err; |
| } |
| |
| static int __init init_idescsi_module(void) |
| { |
| return driver_register(&idescsi_driver.gen_driver); |
| } |
| |
| static void __exit exit_idescsi_module(void) |
| { |
| driver_unregister(&idescsi_driver.gen_driver); |
| } |
| |
| module_param(idescsi_nocd, int, 0600); |
| MODULE_PARM_DESC(idescsi_nocd, "Disable handling of CD-ROMs so they may be driven by ide-cd"); |
| module_init(init_idescsi_module); |
| module_exit(exit_idescsi_module); |
| MODULE_LICENSE("GPL"); |