| /* |
| * Copyright (C) 2011 Marvell International Ltd. All rights reserved. |
| * Author: Chao Xie <chao.xie@marvell.com> |
| * Neil Zhang <zhangwm@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/device.h> |
| #include <linux/proc_fs.h> |
| #include <linux/clk.h> |
| #include <linux/workqueue.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/platform_data/mv_usb.h> |
| |
| #include "phy-mv-usb.h" |
| |
| #define DRIVER_DESC "Marvell USB OTG transceiver driver" |
| #define DRIVER_VERSION "Jan 20, 2010" |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |
| |
| static const char driver_name[] = "mv-otg"; |
| |
| static char *state_string[] = { |
| "undefined", |
| "b_idle", |
| "b_srp_init", |
| "b_peripheral", |
| "b_wait_acon", |
| "b_host", |
| "a_idle", |
| "a_wait_vrise", |
| "a_wait_bcon", |
| "a_host", |
| "a_suspend", |
| "a_peripheral", |
| "a_wait_vfall", |
| "a_vbus_err" |
| }; |
| |
| static int mv_otg_set_vbus(struct usb_otg *otg, bool on) |
| { |
| struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy); |
| if (mvotg->pdata->set_vbus == NULL) |
| return -ENODEV; |
| |
| return mvotg->pdata->set_vbus(on); |
| } |
| |
| static int mv_otg_set_host(struct usb_otg *otg, |
| struct usb_bus *host) |
| { |
| otg->host = host; |
| |
| return 0; |
| } |
| |
| static int mv_otg_set_peripheral(struct usb_otg *otg, |
| struct usb_gadget *gadget) |
| { |
| otg->gadget = gadget; |
| |
| return 0; |
| } |
| |
| static void mv_otg_run_state_machine(struct mv_otg *mvotg, |
| unsigned long delay) |
| { |
| dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n"); |
| if (!mvotg->qwork) |
| return; |
| |
| queue_delayed_work(mvotg->qwork, &mvotg->work, delay); |
| } |
| |
| static void mv_otg_timer_await_bcon(unsigned long data) |
| { |
| struct mv_otg *mvotg = (struct mv_otg *) data; |
| |
| mvotg->otg_ctrl.a_wait_bcon_timeout = 1; |
| |
| dev_info(&mvotg->pdev->dev, "B Device No Response!\n"); |
| |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 0); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| } |
| |
| static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id) |
| { |
| struct timer_list *timer; |
| |
| if (id >= OTG_TIMER_NUM) |
| return -EINVAL; |
| |
| timer = &mvotg->otg_ctrl.timer[id]; |
| |
| if (timer_pending(timer)) |
| del_timer(timer); |
| |
| return 0; |
| } |
| |
| static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id, |
| unsigned long interval, |
| void (*callback) (unsigned long)) |
| { |
| struct timer_list *timer; |
| |
| if (id >= OTG_TIMER_NUM) |
| return -EINVAL; |
| |
| timer = &mvotg->otg_ctrl.timer[id]; |
| if (timer_pending(timer)) { |
| dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id); |
| return -EBUSY; |
| } |
| |
| init_timer(timer); |
| timer->data = (unsigned long) mvotg; |
| timer->function = callback; |
| timer->expires = jiffies + interval; |
| add_timer(timer); |
| |
| return 0; |
| } |
| |
| static int mv_otg_reset(struct mv_otg *mvotg) |
| { |
| unsigned int loops; |
| u32 tmp; |
| |
| /* Stop the controller */ |
| tmp = readl(&mvotg->op_regs->usbcmd); |
| tmp &= ~USBCMD_RUN_STOP; |
| writel(tmp, &mvotg->op_regs->usbcmd); |
| |
| /* Reset the controller to get default values */ |
| writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd); |
| |
| loops = 500; |
| while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) { |
| if (loops == 0) { |
| dev_err(&mvotg->pdev->dev, |
| "Wait for RESET completed TIMEOUT\n"); |
| return -ETIMEDOUT; |
| } |
| loops--; |
| udelay(20); |
| } |
| |
| writel(0x0, &mvotg->op_regs->usbintr); |
| tmp = readl(&mvotg->op_regs->usbsts); |
| writel(tmp, &mvotg->op_regs->usbsts); |
| |
| return 0; |
| } |
| |
| static void mv_otg_init_irq(struct mv_otg *mvotg) |
| { |
| u32 otgsc; |
| |
| mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID |
| | OTGSC_INTR_A_VBUS_VALID; |
| mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID |
| | OTGSC_INTSTS_A_VBUS_VALID; |
| |
| if (mvotg->pdata->vbus == NULL) { |
| mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID |
| | OTGSC_INTR_B_SESSION_END; |
| mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID |
| | OTGSC_INTSTS_B_SESSION_END; |
| } |
| |
| if (mvotg->pdata->id == NULL) { |
| mvotg->irq_en |= OTGSC_INTR_USB_ID; |
| mvotg->irq_status |= OTGSC_INTSTS_USB_ID; |
| } |
| |
| otgsc = readl(&mvotg->op_regs->otgsc); |
| otgsc |= mvotg->irq_en; |
| writel(otgsc, &mvotg->op_regs->otgsc); |
| } |
| |
| static void mv_otg_start_host(struct mv_otg *mvotg, int on) |
| { |
| #ifdef CONFIG_USB |
| struct usb_otg *otg = mvotg->phy.otg; |
| struct usb_hcd *hcd; |
| |
| if (!otg->host) |
| return; |
| |
| dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop"); |
| |
| hcd = bus_to_hcd(otg->host); |
| |
| if (on) |
| usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); |
| else |
| usb_remove_hcd(hcd); |
| #endif /* CONFIG_USB */ |
| } |
| |
| static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) |
| { |
| struct usb_otg *otg = mvotg->phy.otg; |
| |
| if (!otg->gadget) |
| return; |
| |
| dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off"); |
| |
| if (on) |
| usb_gadget_vbus_connect(otg->gadget); |
| else |
| usb_gadget_vbus_disconnect(otg->gadget); |
| } |
| |
| static void otg_clock_enable(struct mv_otg *mvotg) |
| { |
| clk_prepare_enable(mvotg->clk); |
| } |
| |
| static void otg_clock_disable(struct mv_otg *mvotg) |
| { |
| clk_disable_unprepare(mvotg->clk); |
| } |
| |
| static int mv_otg_enable_internal(struct mv_otg *mvotg) |
| { |
| int retval = 0; |
| |
| if (mvotg->active) |
| return 0; |
| |
| dev_dbg(&mvotg->pdev->dev, "otg enabled\n"); |
| |
| otg_clock_enable(mvotg); |
| if (mvotg->pdata->phy_init) { |
| retval = mvotg->pdata->phy_init(mvotg->phy_regs); |
| if (retval) { |
| dev_err(&mvotg->pdev->dev, |
| "init phy error %d\n", retval); |
| otg_clock_disable(mvotg); |
| return retval; |
| } |
| } |
| mvotg->active = 1; |
| |
| return 0; |
| |
| } |
| |
| static int mv_otg_enable(struct mv_otg *mvotg) |
| { |
| if (mvotg->clock_gating) |
| return mv_otg_enable_internal(mvotg); |
| |
| return 0; |
| } |
| |
| static void mv_otg_disable_internal(struct mv_otg *mvotg) |
| { |
| if (mvotg->active) { |
| dev_dbg(&mvotg->pdev->dev, "otg disabled\n"); |
| if (mvotg->pdata->phy_deinit) |
| mvotg->pdata->phy_deinit(mvotg->phy_regs); |
| otg_clock_disable(mvotg); |
| mvotg->active = 0; |
| } |
| } |
| |
| static void mv_otg_disable(struct mv_otg *mvotg) |
| { |
| if (mvotg->clock_gating) |
| mv_otg_disable_internal(mvotg); |
| } |
| |
| static void mv_otg_update_inputs(struct mv_otg *mvotg) |
| { |
| struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; |
| u32 otgsc; |
| |
| otgsc = readl(&mvotg->op_regs->otgsc); |
| |
| if (mvotg->pdata->vbus) { |
| if (mvotg->pdata->vbus->poll() == VBUS_HIGH) { |
| otg_ctrl->b_sess_vld = 1; |
| otg_ctrl->b_sess_end = 0; |
| } else { |
| otg_ctrl->b_sess_vld = 0; |
| otg_ctrl->b_sess_end = 1; |
| } |
| } else { |
| otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID); |
| otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END); |
| } |
| |
| if (mvotg->pdata->id) |
| otg_ctrl->id = !!mvotg->pdata->id->poll(); |
| else |
| otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID); |
| |
| if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id) |
| otg_ctrl->a_bus_req = 1; |
| |
| otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID); |
| otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID); |
| |
| dev_dbg(&mvotg->pdev->dev, "%s: ", __func__); |
| dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id); |
| dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld); |
| dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end); |
| dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld); |
| dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld); |
| } |
| |
| static void mv_otg_update_state(struct mv_otg *mvotg) |
| { |
| struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; |
| struct usb_phy *phy = &mvotg->phy; |
| int old_state = phy->state; |
| |
| switch (old_state) { |
| case OTG_STATE_UNDEFINED: |
| phy->state = OTG_STATE_B_IDLE; |
| /* FALL THROUGH */ |
| case OTG_STATE_B_IDLE: |
| if (otg_ctrl->id == 0) |
| phy->state = OTG_STATE_A_IDLE; |
| else if (otg_ctrl->b_sess_vld) |
| phy->state = OTG_STATE_B_PERIPHERAL; |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0) |
| phy->state = OTG_STATE_B_IDLE; |
| break; |
| case OTG_STATE_A_IDLE: |
| if (otg_ctrl->id) |
| phy->state = OTG_STATE_B_IDLE; |
| else if (!(otg_ctrl->a_bus_drop) && |
| (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det)) |
| phy->state = OTG_STATE_A_WAIT_VRISE; |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| if (otg_ctrl->a_vbus_vld) |
| phy->state = OTG_STATE_A_WAIT_BCON; |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| if (otg_ctrl->id || otg_ctrl->a_bus_drop |
| || otg_ctrl->a_wait_bcon_timeout) { |
| mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); |
| mvotg->otg_ctrl.a_wait_bcon_timeout = 0; |
| phy->state = OTG_STATE_A_WAIT_VFALL; |
| otg_ctrl->a_bus_req = 0; |
| } else if (!otg_ctrl->a_vbus_vld) { |
| mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); |
| mvotg->otg_ctrl.a_wait_bcon_timeout = 0; |
| phy->state = OTG_STATE_A_VBUS_ERR; |
| } else if (otg_ctrl->b_conn) { |
| mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); |
| mvotg->otg_ctrl.a_wait_bcon_timeout = 0; |
| phy->state = OTG_STATE_A_HOST; |
| } |
| break; |
| case OTG_STATE_A_HOST: |
| if (otg_ctrl->id || !otg_ctrl->b_conn |
| || otg_ctrl->a_bus_drop) |
| phy->state = OTG_STATE_A_WAIT_BCON; |
| else if (!otg_ctrl->a_vbus_vld) |
| phy->state = OTG_STATE_A_VBUS_ERR; |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| if (otg_ctrl->id |
| || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld) |
| || otg_ctrl->a_bus_req) |
| phy->state = OTG_STATE_A_IDLE; |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| if (otg_ctrl->id || otg_ctrl->a_clr_err |
| || otg_ctrl->a_bus_drop) { |
| otg_ctrl->a_clr_err = 0; |
| phy->state = OTG_STATE_A_WAIT_VFALL; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void mv_otg_work(struct work_struct *work) |
| { |
| struct mv_otg *mvotg; |
| struct usb_phy *phy; |
| struct usb_otg *otg; |
| int old_state; |
| |
| mvotg = container_of(to_delayed_work(work), struct mv_otg, work); |
| |
| run: |
| /* work queue is single thread, or we need spin_lock to protect */ |
| phy = &mvotg->phy; |
| otg = phy->otg; |
| old_state = phy->state; |
| |
| if (!mvotg->active) |
| return; |
| |
| mv_otg_update_inputs(mvotg); |
| mv_otg_update_state(mvotg); |
| |
| if (old_state != phy->state) { |
| dev_info(&mvotg->pdev->dev, "change from state %s to %s\n", |
| state_string[old_state], |
| state_string[phy->state]); |
| |
| switch (phy->state) { |
| case OTG_STATE_B_IDLE: |
| otg->default_a = 0; |
| if (old_state == OTG_STATE_B_PERIPHERAL) |
| mv_otg_start_periphrals(mvotg, 0); |
| mv_otg_reset(mvotg); |
| mv_otg_disable(mvotg); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| mv_otg_enable(mvotg); |
| mv_otg_start_periphrals(mvotg, 1); |
| break; |
| case OTG_STATE_A_IDLE: |
| otg->default_a = 1; |
| mv_otg_enable(mvotg); |
| if (old_state == OTG_STATE_A_WAIT_VFALL) |
| mv_otg_start_host(mvotg, 0); |
| mv_otg_reset(mvotg); |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| mv_otg_set_vbus(otg, 1); |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| if (old_state != OTG_STATE_A_HOST) |
| mv_otg_start_host(mvotg, 1); |
| mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER, |
| T_A_WAIT_BCON, |
| mv_otg_timer_await_bcon); |
| /* |
| * Now, we directly enter A_HOST. So set b_conn = 1 |
| * here. In fact, it need host driver to notify us. |
| */ |
| mvotg->otg_ctrl.b_conn = 1; |
| break; |
| case OTG_STATE_A_HOST: |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| /* |
| * Now, we has exited A_HOST. So set b_conn = 0 |
| * here. In fact, it need host driver to notify us. |
| */ |
| mvotg->otg_ctrl.b_conn = 0; |
| mv_otg_set_vbus(otg, 0); |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| break; |
| default: |
| break; |
| } |
| goto run; |
| } |
| } |
| |
| static irqreturn_t mv_otg_irq(int irq, void *dev) |
| { |
| struct mv_otg *mvotg = dev; |
| u32 otgsc; |
| |
| otgsc = readl(&mvotg->op_regs->otgsc); |
| writel(otgsc, &mvotg->op_regs->otgsc); |
| |
| /* |
| * if we have vbus, then the vbus detection for B-device |
| * will be done by mv_otg_inputs_irq(). |
| */ |
| if (mvotg->pdata->vbus) |
| if ((otgsc & OTGSC_STS_USB_ID) && |
| !(otgsc & OTGSC_INTSTS_USB_ID)) |
| return IRQ_NONE; |
| |
| if ((otgsc & mvotg->irq_status) == 0) |
| return IRQ_NONE; |
| |
| mv_otg_run_state_machine(mvotg, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mv_otg_inputs_irq(int irq, void *dev) |
| { |
| struct mv_otg *mvotg = dev; |
| |
| /* The clock may disabled at this time */ |
| if (!mvotg->active) { |
| mv_otg_enable(mvotg); |
| mv_otg_init_irq(mvotg); |
| } |
| |
| mv_otg_run_state_machine(mvotg, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static ssize_t |
| get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct mv_otg *mvotg = dev_get_drvdata(dev); |
| return scnprintf(buf, PAGE_SIZE, "%d\n", |
| mvotg->otg_ctrl.a_bus_req); |
| } |
| |
| static ssize_t |
| set_a_bus_req(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct mv_otg *mvotg = dev_get_drvdata(dev); |
| |
| if (count > 2) |
| return -1; |
| |
| /* We will use this interface to change to A device */ |
| if (mvotg->phy.state != OTG_STATE_B_IDLE |
| && mvotg->phy.state != OTG_STATE_A_IDLE) |
| return -1; |
| |
| /* The clock may disabled and we need to set irq for ID detected */ |
| mv_otg_enable(mvotg); |
| mv_otg_init_irq(mvotg); |
| |
| if (buf[0] == '1') { |
| mvotg->otg_ctrl.a_bus_req = 1; |
| mvotg->otg_ctrl.a_bus_drop = 0; |
| dev_dbg(&mvotg->pdev->dev, |
| "User request: a_bus_req = 1\n"); |
| |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 0); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, |
| set_a_bus_req); |
| |
| static ssize_t |
| set_a_clr_err(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct mv_otg *mvotg = dev_get_drvdata(dev); |
| if (!mvotg->phy.otg->default_a) |
| return -1; |
| |
| if (count > 2) |
| return -1; |
| |
| if (buf[0] == '1') { |
| mvotg->otg_ctrl.a_clr_err = 1; |
| dev_dbg(&mvotg->pdev->dev, |
| "User request: a_clr_err = 1\n"); |
| } |
| |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 0); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); |
| |
| static ssize_t |
| get_a_bus_drop(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct mv_otg *mvotg = dev_get_drvdata(dev); |
| return scnprintf(buf, PAGE_SIZE, "%d\n", |
| mvotg->otg_ctrl.a_bus_drop); |
| } |
| |
| static ssize_t |
| set_a_bus_drop(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct mv_otg *mvotg = dev_get_drvdata(dev); |
| if (!mvotg->phy.otg->default_a) |
| return -1; |
| |
| if (count > 2) |
| return -1; |
| |
| if (buf[0] == '0') { |
| mvotg->otg_ctrl.a_bus_drop = 0; |
| dev_dbg(&mvotg->pdev->dev, |
| "User request: a_bus_drop = 0\n"); |
| } else if (buf[0] == '1') { |
| mvotg->otg_ctrl.a_bus_drop = 1; |
| mvotg->otg_ctrl.a_bus_req = 0; |
| dev_dbg(&mvotg->pdev->dev, |
| "User request: a_bus_drop = 1\n"); |
| dev_dbg(&mvotg->pdev->dev, |
| "User request: and a_bus_req = 0\n"); |
| } |
| |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 0); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, |
| get_a_bus_drop, set_a_bus_drop); |
| |
| static struct attribute *inputs_attrs[] = { |
| &dev_attr_a_bus_req.attr, |
| &dev_attr_a_clr_err.attr, |
| &dev_attr_a_bus_drop.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group inputs_attr_group = { |
| .name = "inputs", |
| .attrs = inputs_attrs, |
| }; |
| |
| int mv_otg_remove(struct platform_device *pdev) |
| { |
| struct mv_otg *mvotg = platform_get_drvdata(pdev); |
| |
| sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group); |
| |
| if (mvotg->qwork) { |
| flush_workqueue(mvotg->qwork); |
| destroy_workqueue(mvotg->qwork); |
| } |
| |
| mv_otg_disable(mvotg); |
| |
| usb_remove_phy(&mvotg->phy); |
| |
| return 0; |
| } |
| |
| static int mv_otg_probe(struct platform_device *pdev) |
| { |
| struct mv_usb_platform_data *pdata = pdev->dev.platform_data; |
| struct mv_otg *mvotg; |
| struct usb_otg *otg; |
| struct resource *r; |
| int retval = 0, i; |
| |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "failed to get platform data\n"); |
| return -ENODEV; |
| } |
| |
| mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL); |
| if (!mvotg) { |
| dev_err(&pdev->dev, "failed to allocate memory!\n"); |
| return -ENOMEM; |
| } |
| |
| otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); |
| if (!otg) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, mvotg); |
| |
| mvotg->pdev = pdev; |
| mvotg->pdata = pdata; |
| |
| mvotg->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(mvotg->clk)) |
| return PTR_ERR(mvotg->clk); |
| |
| mvotg->qwork = create_singlethread_workqueue("mv_otg_queue"); |
| if (!mvotg->qwork) { |
| dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n"); |
| return -ENOMEM; |
| } |
| |
| INIT_DELAYED_WORK(&mvotg->work, mv_otg_work); |
| |
| /* OTG common part */ |
| mvotg->pdev = pdev; |
| mvotg->phy.dev = &pdev->dev; |
| mvotg->phy.otg = otg; |
| mvotg->phy.label = driver_name; |
| mvotg->phy.state = OTG_STATE_UNDEFINED; |
| |
| otg->phy = &mvotg->phy; |
| otg->set_host = mv_otg_set_host; |
| otg->set_peripheral = mv_otg_set_peripheral; |
| otg->set_vbus = mv_otg_set_vbus; |
| |
| for (i = 0; i < OTG_TIMER_NUM; i++) |
| init_timer(&mvotg->otg_ctrl.timer[i]); |
| |
| r = platform_get_resource_byname(mvotg->pdev, |
| IORESOURCE_MEM, "phyregs"); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); |
| retval = -ENODEV; |
| goto err_destroy_workqueue; |
| } |
| |
| mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); |
| if (mvotg->phy_regs == NULL) { |
| dev_err(&pdev->dev, "failed to map phy I/O memory\n"); |
| retval = -EFAULT; |
| goto err_destroy_workqueue; |
| } |
| |
| r = platform_get_resource_byname(mvotg->pdev, |
| IORESOURCE_MEM, "capregs"); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "no I/O memory resource defined\n"); |
| retval = -ENODEV; |
| goto err_destroy_workqueue; |
| } |
| |
| mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); |
| if (mvotg->cap_regs == NULL) { |
| dev_err(&pdev->dev, "failed to map I/O memory\n"); |
| retval = -EFAULT; |
| goto err_destroy_workqueue; |
| } |
| |
| /* we will acces controller register, so enable the udc controller */ |
| retval = mv_otg_enable_internal(mvotg); |
| if (retval) { |
| dev_err(&pdev->dev, "mv otg enable error %d\n", retval); |
| goto err_destroy_workqueue; |
| } |
| |
| mvotg->op_regs = |
| (struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs |
| + (readl(mvotg->cap_regs) & CAPLENGTH_MASK)); |
| |
| if (pdata->id) { |
| retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq, |
| NULL, mv_otg_inputs_irq, |
| IRQF_ONESHOT, "id", mvotg); |
| if (retval) { |
| dev_info(&pdev->dev, |
| "Failed to request irq for ID\n"); |
| pdata->id = NULL; |
| } |
| } |
| |
| if (pdata->vbus) { |
| mvotg->clock_gating = 1; |
| retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq, |
| NULL, mv_otg_inputs_irq, |
| IRQF_ONESHOT, "vbus", mvotg); |
| if (retval) { |
| dev_info(&pdev->dev, |
| "Failed to request irq for VBUS, " |
| "disable clock gating\n"); |
| mvotg->clock_gating = 0; |
| pdata->vbus = NULL; |
| } |
| } |
| |
| if (pdata->disable_otg_clock_gating) |
| mvotg->clock_gating = 0; |
| |
| mv_otg_reset(mvotg); |
| mv_otg_init_irq(mvotg); |
| |
| r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "no IRQ resource defined\n"); |
| retval = -ENODEV; |
| goto err_disable_clk; |
| } |
| |
| mvotg->irq = r->start; |
| if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED, |
| driver_name, mvotg)) { |
| dev_err(&pdev->dev, "Request irq %d for OTG failed\n", |
| mvotg->irq); |
| mvotg->irq = 0; |
| retval = -ENODEV; |
| goto err_disable_clk; |
| } |
| |
| retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2); |
| if (retval < 0) { |
| dev_err(&pdev->dev, "can't register transceiver, %d\n", |
| retval); |
| goto err_disable_clk; |
| } |
| |
| retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group); |
| if (retval < 0) { |
| dev_dbg(&pdev->dev, |
| "Can't register sysfs attr group: %d\n", retval); |
| goto err_remove_phy; |
| } |
| |
| spin_lock_init(&mvotg->wq_lock); |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 2 * HZ); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| |
| dev_info(&pdev->dev, |
| "successful probe OTG device %s clock gating.\n", |
| mvotg->clock_gating ? "with" : "without"); |
| |
| return 0; |
| |
| err_remove_phy: |
| usb_remove_phy(&mvotg->phy); |
| err_disable_clk: |
| mv_otg_disable_internal(mvotg); |
| err_destroy_workqueue: |
| flush_workqueue(mvotg->qwork); |
| destroy_workqueue(mvotg->qwork); |
| |
| return retval; |
| } |
| |
| #ifdef CONFIG_PM |
| static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct mv_otg *mvotg = platform_get_drvdata(pdev); |
| |
| if (mvotg->phy.state != OTG_STATE_B_IDLE) { |
| dev_info(&pdev->dev, |
| "OTG state is not B_IDLE, it is %d!\n", |
| mvotg->phy.state); |
| return -EAGAIN; |
| } |
| |
| if (!mvotg->clock_gating) |
| mv_otg_disable_internal(mvotg); |
| |
| return 0; |
| } |
| |
| static int mv_otg_resume(struct platform_device *pdev) |
| { |
| struct mv_otg *mvotg = platform_get_drvdata(pdev); |
| u32 otgsc; |
| |
| if (!mvotg->clock_gating) { |
| mv_otg_enable_internal(mvotg); |
| |
| otgsc = readl(&mvotg->op_regs->otgsc); |
| otgsc |= mvotg->irq_en; |
| writel(otgsc, &mvotg->op_regs->otgsc); |
| |
| if (spin_trylock(&mvotg->wq_lock)) { |
| mv_otg_run_state_machine(mvotg, 0); |
| spin_unlock(&mvotg->wq_lock); |
| } |
| } |
| return 0; |
| } |
| #endif |
| |
| static struct platform_driver mv_otg_driver = { |
| .probe = mv_otg_probe, |
| .remove = __exit_p(mv_otg_remove), |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = driver_name, |
| }, |
| #ifdef CONFIG_PM |
| .suspend = mv_otg_suspend, |
| .resume = mv_otg_resume, |
| #endif |
| }; |
| module_platform_driver(mv_otg_driver); |