V4L/DVB (9254): cx24116: Checkpatch compliance #2
cx24116: Checkpatch compliance #2
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
index deb36f4..751792a 100644
--- a/drivers/media/dvb/frontends/cx24116.c
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -41,10 +41,14 @@
#include "dvb_frontend.h"
#include "cx24116.h"
-static int debug = 0;
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
#define dprintk(args...) \
do { \
- if (debug) printk ("cx24116: " args); \
+ if (debug) \
+ printk("cx24116: " args); \
} while (0)
#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw"
@@ -116,12 +120,15 @@
/* DiSEqC tone burst */
static int toneburst = 1;
+module_param(toneburst, int, 0644);
+MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)");
/* SNR measurements */
-static int esno_snr = 0;
+static int esno_snr;
+module_param(esno_snr, int, 0644);
+MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)");
-enum cmds
-{
+enum cmds {
CMD_SET_VCO = 0x10,
CMD_TUNEREQUEST = 0x11,
CMD_MPEGCONFIG = 0x13,
@@ -138,8 +145,7 @@
};
/* The Demod/Tuner can't easily provide these, we cache them */
-struct cx24116_tuning
-{
+struct cx24116_tuning {
u32 frequency;
u32 symbol_rate;
fe_spectral_inversion_t inversion;
@@ -158,16 +164,14 @@
};
/* Basic commands that are sent to the firmware */
-struct cx24116_cmd
-{
+struct cx24116_cmd {
u8 len;
u8 args[CX24116_ARGLEN];
};
-struct cx24116_state
-{
- struct i2c_adapter* i2c;
- const struct cx24116_config* config;
+struct cx24116_state {
+ struct i2c_adapter *i2c;
+ const struct cx24116_config *config;
struct dvb_frontend frontend;
@@ -179,18 +183,19 @@
struct cx24116_cmd dsec_cmd;
};
-static int cx24116_writereg(struct cx24116_state* state, int reg, int data)
+static int cx24116_writereg(struct cx24116_state *state, int reg, int data)
{
u8 buf[] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address,
.flags = 0, .buf = buf, .len = 2 };
int err;
- if (debug>1)
+ if (debug > 1)
printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
- __func__,reg, data);
+ __func__, reg, data);
- if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1) {
printk("%s: writereg error(err == %i, reg == 0x%02x,"
" value == 0x%02x)\n", __func__, err, reg, data);
return -EREMOTEIO;
@@ -200,7 +205,8 @@
}
/* Bulk byte writes to a single I2C address, for 32k firmware load */
-static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 len)
+static int cx24116_writeregN(struct cx24116_state *state, int reg,
+ u8 *data, u16 len)
{
int ret = -EREMOTEIO;
struct i2c_msg msg;
@@ -221,11 +227,12 @@
msg.buf = buf;
msg.len = len + 1;
- if (debug>1)
+ if (debug > 1)
printk("cx24116: %s: write regN 0x%02x, len = %d\n",
- __func__,reg, len);
+ __func__, reg, len);
- if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
printk("%s: writereg error(err == %i, reg == 0x%02x\n",
__func__, ret, reg);
ret = -EREMOTEIO;
@@ -237,14 +244,16 @@
return ret;
}
-static int cx24116_readreg(struct cx24116_state* state, u8 reg)
+static int cx24116_readreg(struct cx24116_state *state, u8 reg)
{
int ret;
u8 b0[] = { reg };
u8 b1[] = { 0 };
struct i2c_msg msg[] = {
- { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+ { .addr = state->config->demod_address, .flags = 0,
+ .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD,
+ .buf = b1, .len = 1 }
};
ret = i2c_transfer(state->i2c, msg, 2);
@@ -254,13 +263,14 @@
return ret;
}
- if (debug>1)
- printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]);
+ if (debug > 1)
+ printk("cx24116: read reg 0x%02x, value 0x%02x\n",
+ reg, b1[0]);
return b1[0];
}
-static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_inversion_t inversion)
+static int cx24116_set_inversion(struct cx24116_state *state, fe_spectral_inversion_t inversion)
{
dprintk("%s(%d)\n", __func__, inversion);
@@ -389,18 +399,16 @@
*/
};
-static int cx24116_lookup_fecmod(struct cx24116_state* state,
+static int cx24116_lookup_fecmod(struct cx24116_state *state,
fe_modulation_t m, fe_code_rate_t f)
{
int i, ret = -EOPNOTSUPP;
dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f);
- for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++)
- {
- if( (m == CX24116_MODFEC_MODES[i].modulation) &&
- (f == CX24116_MODFEC_MODES[i].fec) )
- {
+ for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) {
+ if ((m == CX24116_MODFEC_MODES[i].modulation) &&
+ (f == CX24116_MODFEC_MODES[i].fec)) {
ret = i;
break;
}
@@ -409,7 +417,7 @@
return ret;
}
-static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec)
+static int cx24116_set_fec(struct cx24116_state *state, fe_modulation_t mod, fe_code_rate_t fec)
{
int ret = 0;
@@ -417,7 +425,7 @@
ret = cx24116_lookup_fecmod(state, mod, fec);
- if(ret < 0)
+ if (ret < 0)
return ret;
state->dnxt.fec = fec;
@@ -429,7 +437,7 @@
return 0;
}
-static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate)
+static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate)
{
dprintk("%s(%d)\n", __func__, rate);
@@ -446,18 +454,18 @@
return 0;
}
-static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw);
+static int cx24116_load_firmware(struct dvb_frontend *fe,
+ const struct firmware *fw);
-static int cx24116_firmware_ondemand(struct dvb_frontend* fe)
+static int cx24116_firmware_ondemand(struct dvb_frontend *fe)
{
struct cx24116_state *state = fe->demodulator_priv;
const struct firmware *fw;
int ret = 0;
- dprintk("%s()\n",__func__);
+ dprintk("%s()\n", __func__);
- if (cx24116_readreg(state, 0x20) > 0)
- {
+ if (cx24116_readreg(state, 0x20) > 0) {
if (state->skip_fw_load)
return 0;
@@ -491,7 +499,7 @@
}
/* Take a basic firmware command structure, format it and forward it for processing */
-static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd)
+static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd)
{
struct cx24116_state *state = fe->demodulator_priv;
int i, ret;
@@ -499,26 +507,23 @@
dprintk("%s()\n", __func__);
/* Load the firmware if required */
- if ( (ret = cx24116_firmware_ondemand(fe)) != 0)
- {
+ ret = cx24116_firmware_ondemand(fe);
+ if (ret != 0) {
printk("%s(): Unable initialise the firmware\n", __func__);
return ret;
}
/* Write the command */
- for(i = 0; i < cmd->len ; i++)
- {
+ for (i = 0; i < cmd->len ; i++) {
dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]);
cx24116_writereg(state, i, cmd->args[i]);
}
/* Start execution and wait for cmd to terminate */
cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01);
- while( cx24116_readreg(state, CX24116_REG_EXECUTE) )
- {
+ while (cx24116_readreg(state, CX24116_REG_EXECUTE)) {
msleep(10);
- if(i++ > 64)
- {
+ if (i++ > 64) {
/* Avoid looping forever if the firmware does no respond */
printk("%s() Firmware not responding\n", __func__);
return -EREMOTEIO;
@@ -527,21 +532,21 @@
return 0;
}
-static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+static int cx24116_load_firmware(struct dvb_frontend *fe,
+ const struct firmware *fw)
{
- struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_state *state = fe->demodulator_priv;
struct cx24116_cmd cmd;
int i, ret;
unsigned char vers[4];
dprintk("%s\n", __func__);
- dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n"
- ,fw->size
- ,fw->data[0]
- ,fw->data[1]
- ,fw->data[ fw->size-2 ]
- ,fw->data[ fw->size-1 ]
- );
+ dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
+ fw->size,
+ fw->data[0],
+ fw->data[1],
+ fw->data[fw->size-2],
+ fw->data[fw->size-1]);
/* Toggle 88x SRST pin to reset demod */
if (state->config->reset_device)
@@ -587,7 +592,7 @@
cmd.args[0x07] = 0x9d;
cmd.args[0x08] = 0xfc;
cmd.args[0x09] = 0x06;
- cmd.len= 0x0a;
+ cmd.len = 0x0a;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -598,7 +603,7 @@
cmd.args[0x00] = CMD_TUNERINIT;
cmd.args[0x01] = 0x00;
cmd.args[0x02] = 0x00;
- cmd.len= 0x03;
+ cmd.len = 0x03;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -615,20 +620,20 @@
else
cmd.args[0x04] = 0x02;
cmd.args[0x05] = 0x00;
- cmd.len= 0x06;
+ cmd.len = 0x06;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
/* Firmware CMD 35: Get firmware version */
cmd.args[0x00] = CMD_UPDFWVERS;
- cmd.len= 0x02;
- for(i=0; i<4; i++) {
+ cmd.len = 0x02;
+ for (i = 0; i < 4; i++) {
cmd.args[0x01] = i;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
- vers[i]= cx24116_readreg(state, CX24116_REG_MAILBOX);
+ vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX);
}
printk("%s: FW version %i.%i.%i.%i\n", __func__,
vers[0], vers[1], vers[2], vers[3]);
@@ -636,15 +641,17 @@
return 0;
}
-static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+static int cx24116_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
{
/* The isl6421 module will override this function in the fops. */
- dprintk("%s() This should never appear if the isl6421 module is loaded correctly\n",__func__);
+ dprintk("%s() This should never appear if the isl6421 module "
+ "is loaded correctly\n", __func__);
return -EOPNOTSUPP;
}
-static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status)
+static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct cx24116_state *state = fe->demodulator_priv;
@@ -666,22 +673,23 @@
return 0;
}
-static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber)
+static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct cx24116_state *state = fe->demodulator_priv;
dprintk("%s()\n", __func__);
- *ber = ( cx24116_readreg(state, CX24116_REG_BER24) << 24 ) |
- ( cx24116_readreg(state, CX24116_REG_BER16) << 16 ) |
- ( cx24116_readreg(state, CX24116_REG_BER8 ) << 8 ) |
- cx24116_readreg(state, CX24116_REG_BER0 );
+ *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) |
+ (cx24116_readreg(state, CX24116_REG_BER16) << 16) |
+ (cx24116_readreg(state, CX24116_REG_BER8) << 8) |
+ cx24116_readreg(state, CX24116_REG_BER0);
return 0;
}
/* TODO Determine function and scale appropriately */
-static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+static int cx24116_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
{
struct cx24116_state *state = fe->demodulator_priv;
struct cx24116_cmd cmd;
@@ -692,39 +700,43 @@
/* Firmware CMD 19: Get AGC */
cmd.args[0x00] = CMD_GETAGC;
- cmd.len= 0x01;
+ cmd.len = 0x01;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
- sig_reading = ( cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK ) |
- ( cx24116_readreg(state, CX24116_REG_SIGNAL) << 6 );
- *signal_strength= 0 - sig_reading;
+ sig_reading =
+ (cx24116_readreg(state,
+ CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) |
+ (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6);
+ *signal_strength = 0 - sig_reading;
- dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, sig_reading, *signal_strength);
+ dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n",
+ __func__, sig_reading, *signal_strength);
return 0;
}
/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
-static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr)
+static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr)
{
struct cx24116_state *state = fe->demodulator_priv;
u8 snr_reading;
static const u32 snr_tab[] = { /* 10 x Table (rounded up) */
- 0x00000,0x0199A,0x03333,0x04ccD,0x06667,
- 0x08000,0x0999A,0x0b333,0x0cccD,0x0e667,
- 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 };
+ 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667,
+ 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667,
+ 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667,
+ 0x18000 };
dprintk("%s()\n", __func__);
snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0);
- if(snr_reading >= 0xa0 /* 100% */)
+ if (snr_reading >= 0xa0 /* 100% */)
*snr = 0xffff;
else
- *snr = snr_tab [ ( snr_reading & 0xf0 ) >> 4 ] +
- ( snr_tab [ ( snr_reading & 0x0f ) ] >> 4 );
+ *snr = snr_tab[(snr_reading & 0xf0) >> 4] +
+ (snr_tab[(snr_reading & 0x0f)] >> 4);
dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
snr_reading, *snr);
@@ -736,7 +748,7 @@
* ESNO, from 0->30db (values 0->300). We provide this value by
* default.
*/
-static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr)
+static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr)
{
struct cx24116_state *state = fe->demodulator_priv;
@@ -750,7 +762,7 @@
return 0;
}
-static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
+static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr)
{
if (esno_snr == 1)
return cx24116_read_snr_esno(fe, snr);
@@ -758,27 +770,27 @@
return cx24116_read_snr_pct(fe, snr);
}
-static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct cx24116_state *state = fe->demodulator_priv;
dprintk("%s()\n", __func__);
- *ucblocks = ( cx24116_readreg(state, CX24116_REG_UCB8) << 8 ) |
+ *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) |
cx24116_readreg(state, CX24116_REG_UCB0);
return 0;
}
/* Overwrite the current tuning params, we are about to tune */
-static void cx24116_clone_params(struct dvb_frontend* fe)
+static void cx24116_clone_params(struct dvb_frontend *fe)
{
struct cx24116_state *state = fe->demodulator_priv;
memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
}
/* Wait for LNB */
-static int cx24116_wait_for_lnb(struct dvb_frontend* fe)
+static int cx24116_wait_for_lnb(struct dvb_frontend *fe)
{
struct cx24116_state *state = fe->demodulator_priv;
int i;
@@ -787,7 +799,7 @@
cx24116_readreg(state, CX24116_REG_QSTATUS));
/* Wait for up to 300 ms */
- for(i = 0; i < 30 ; i++) {
+ for (i = 0; i < 30 ; i++) {
if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20)
return 0;
msleep(10);
@@ -798,20 +810,21 @@
return -ETIMEDOUT; /* -EBUSY ? */
}
-static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+static int cx24116_set_tone(struct dvb_frontend *fe,
+ fe_sec_tone_mode_t tone)
{
struct cx24116_cmd cmd;
int ret;
dprintk("%s(%d)\n", __func__, tone);
- if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) {
+ if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
printk("%s: Invalid, tone=%d\n", __func__, tone);
return -EINVAL;
}
/* Wait for LNB ready */
ret = cx24116_wait_for_lnb(fe);
- if(ret != 0)
+ if (ret != 0)
return ret;
/* Min delay time after DiSEqC send */
@@ -820,7 +833,7 @@
/* This is always done before the tone is set */
cmd.args[0x00] = CMD_SET_TONEPRE;
cmd.args[0x01] = 0x00;
- cmd.len= 0x02;
+ cmd.len = 0x02;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -836,11 +849,11 @@
cmd.args[0x03] = 0x01;
break;
case SEC_TONE_OFF:
- dprintk("%s: setting tone off\n",__func__);
+ dprintk("%s: setting tone off\n", __func__);
cmd.args[0x03] = 0x00;
break;
}
- cmd.len= 0x04;
+ cmd.len = 0x04;
/* Min delay time before DiSEqC send */
msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
@@ -849,7 +862,7 @@
}
/* Initialise DiSEqC */
-static int cx24116_diseqc_init(struct dvb_frontend* fe)
+static int cx24116_diseqc_init(struct dvb_frontend *fe)
{
struct cx24116_state *state = fe->demodulator_priv;
struct cx24116_cmd cmd;
@@ -864,7 +877,7 @@
cmd.args[0x05] = 0x28;
cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01;
cmd.args[0x07] = 0x01;
- cmd.len= 0x08;
+ cmd.len = 0x08;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -884,13 +897,14 @@
state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00;
/* Command length */
- state->dsec_cmd.len= CX24116_DISEQC_MSGOFS;
+ state->dsec_cmd.len = CX24116_DISEQC_MSGOFS;
return 0;
}
/* Send DiSEqC message with derived burst (hack) || previous burst */
-static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d)
+static int cx24116_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *d)
{
struct cx24116_state *state = fe->demodulator_priv;
int i, ret;
@@ -898,16 +912,16 @@
/* Dump DiSEqC message */
if (debug) {
printk("cx24116: %s(", __func__);
- for(i = 0 ; i < d->msg_len ;) {
+ for (i = 0 ; i < d->msg_len ;) {
printk("0x%02x", d->msg[i]);
- if(++i < d->msg_len)
+ if (++i < d->msg_len)
printk(", ");
- }
+ }
printk(") toneburst=%d\n", toneburst);
}
/* Validate length */
- if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
+ if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
return -EINVAL;
/* DiSEqC message */
@@ -918,18 +932,19 @@
state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len;
/* Command length */
- state->dsec_cmd.len= CX24116_DISEQC_MSGOFS + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN];
+ state->dsec_cmd.len = CX24116_DISEQC_MSGOFS +
+ state->dsec_cmd.args[CX24116_DISEQC_MSGLEN];
/* DiSEqC toneburst */
- if(toneburst == CX24116_DISEQC_MESGCACHE)
+ if (toneburst == CX24116_DISEQC_MESGCACHE)
/* Message is cached */
return 0;
- else if(toneburst == CX24116_DISEQC_TONEOFF)
+ else if (toneburst == CX24116_DISEQC_TONEOFF)
/* Message is sent without burst */
state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0;
- else if(toneburst == CX24116_DISEQC_TONECACHE) {
+ else if (toneburst == CX24116_DISEQC_TONECACHE) {
/*
* Message is sent with derived else cached burst
*
@@ -948,15 +963,17 @@
* Y = VOLTAGE (0=13V, 1=18V)
* Z = BAND (0=LOW, 1=HIGH(22K))
*/
- if(d->msg_len >= 4 && d->msg[2] == 0x38)
- state->dsec_cmd.args[CX24116_DISEQC_BURST] = ((d->msg[3] & 4) >> 2);
- if(debug)
- dprintk("%s burst=%d\n", __func__, state->dsec_cmd.args[CX24116_DISEQC_BURST]);
+ if (d->msg_len >= 4 && d->msg[2] == 0x38)
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+ ((d->msg[3] & 4) >> 2);
+ if (debug)
+ dprintk("%s burst=%d\n", __func__,
+ state->dsec_cmd.args[CX24116_DISEQC_BURST]);
}
/* Wait for LNB ready */
ret = cx24116_wait_for_lnb(fe);
- if(ret != 0)
+ if (ret != 0)
return ret;
/* Wait for voltage/min repeat delay */
@@ -964,7 +981,7 @@
/* Command */
ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
- if(ret != 0)
+ if (ret != 0)
return ret;
/*
* Wait for send
@@ -976,29 +993,33 @@
* 12.5ms burst +
* >15ms delay (XXX determine if FW does this, see set_tone)
*/
- msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60) );
+ msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) +
+ ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60));
return 0;
}
/* Send DiSEqC burst */
-static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+static int cx24116_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t burst)
{
struct cx24116_state *state = fe->demodulator_priv;
int ret;
- dprintk("%s(%d) toneburst=%d\n",__func__, burst, toneburst);
+ dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst);
/* DiSEqC burst */
if (burst == SEC_MINI_A)
- state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A;
- else if(burst == SEC_MINI_B)
- state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B;
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+ CX24116_DISEQC_MINI_A;
+ else if (burst == SEC_MINI_B)
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+ CX24116_DISEQC_MINI_B;
else
return -EINVAL;
/* DiSEqC toneburst */
- if(toneburst != CX24116_DISEQC_MESGCACHE)
+ if (toneburst != CX24116_DISEQC_MESGCACHE)
/* Burst is cached */
return 0;
@@ -1006,7 +1027,7 @@
/* Wait for LNB ready */
ret = cx24116_wait_for_lnb(fe);
- if(ret != 0)
+ if (ret != 0)
return ret;
/* Wait for voltage/min repeat delay */
@@ -1014,7 +1035,7 @@
/* Command */
ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
- if(ret != 0)
+ if (ret != 0)
return ret;
/*
@@ -1027,27 +1048,27 @@
* 12.5ms burst +
* >15ms delay (XXX determine if FW does this, see set_tone)
*/
- msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 );
+ msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60);
return 0;
}
-static void cx24116_release(struct dvb_frontend* fe)
+static void cx24116_release(struct dvb_frontend *fe)
{
- struct cx24116_state* state = fe->demodulator_priv;
- dprintk("%s\n",__func__);
+ struct cx24116_state *state = fe->demodulator_priv;
+ dprintk("%s\n", __func__);
kfree(state);
}
static struct dvb_frontend_ops cx24116_ops;
-struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
- struct i2c_adapter* i2c)
+struct dvb_frontend *cx24116_attach(const struct cx24116_config *config,
+ struct i2c_adapter *i2c)
{
- struct cx24116_state* state = NULL;
+ struct cx24116_state *state = NULL;
int ret;
- dprintk("%s\n",__func__);
+ dprintk("%s\n", __func__);
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL);
@@ -1077,18 +1098,20 @@
error2: kfree(state);
error1: return NULL;
}
+EXPORT_SYMBOL(cx24116_attach);
+
/*
* Initialise or wake up device
*
* Power config will reset and load initial firmware if required
*/
-static int cx24116_initfe(struct dvb_frontend* fe)
+static int cx24116_initfe(struct dvb_frontend *fe)
{
- struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_state *state = fe->demodulator_priv;
struct cx24116_cmd cmd;
int ret;
- dprintk("%s()\n",__func__);
+ dprintk("%s()\n", __func__);
/* Power on */
cx24116_writereg(state, 0xe0, 0);
@@ -1098,9 +1121,9 @@
/* Firmware CMD 36: Power config */
cmd.args[0x00] = CMD_TUNERSLEEP;
cmd.args[0x01] = 0;
- cmd.len= 0x02;
+ cmd.len = 0x02;
ret = cx24116_cmd_execute(fe, &cmd);
- if(ret != 0)
+ if (ret != 0)
return ret;
return cx24116_diseqc_init(fe);
@@ -1109,20 +1132,20 @@
/*
* Put device to sleep
*/
-static int cx24116_sleep(struct dvb_frontend* fe)
+static int cx24116_sleep(struct dvb_frontend *fe)
{
- struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_state *state = fe->demodulator_priv;
struct cx24116_cmd cmd;
int ret;
- dprintk("%s()\n",__func__);
+ dprintk("%s()\n", __func__);
/* Firmware CMD 36: Power config */
cmd.args[0x00] = CMD_TUNERSLEEP;
cmd.args[0x01] = 1;
- cmd.len= 0x02;
+ cmd.len = 0x02;
ret = cx24116_cmd_execute(fe, &cmd);
- if(ret != 0)
+ if (ret != 0)
return ret;
/* Power off (Shutdown clocks) */
@@ -1133,13 +1156,15 @@
return 0;
}
-static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp)
+static int cx24116_set_property(struct dvb_frontend *fe,
+ struct dtv_property *tvp)
{
dprintk("%s(..)\n", __func__);
return 0;
}
-static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tvp)
+static int cx24116_get_property(struct dvb_frontend *fe,
+ struct dtv_property *tvp)
{
dprintk("%s(..)\n", __func__);
return 0;
@@ -1148,7 +1173,8 @@
/* dvb-core told us to tune, the tv property cache will be complete,
* it's safe for is to pull values and use them for tuning purposes.
*/
-static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+static int cx24116_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
{
struct cx24116_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
@@ -1156,96 +1182,99 @@
fe_status_t tunerstat;
int i, status, ret, retune;
- dprintk("%s()\n",__func__);
+ dprintk("%s()\n", __func__);
- switch(c->delivery_system) {
- case SYS_DVBS:
- dprintk("%s: DVB-S delivery system selected\n",__func__);
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ dprintk("%s: DVB-S delivery system selected\n", __func__);
- /* Only QPSK is supported for DVB-S */
- if(c->modulation != QPSK) {
- dprintk("%s: unsupported modulation selected (%d)\n",
- __func__, c->modulation);
- return -EOPNOTSUPP;
- }
+ /* Only QPSK is supported for DVB-S */
+ if (c->modulation != QPSK) {
+ dprintk("%s: unsupported modulation selected (%d)\n",
+ __func__, c->modulation);
+ return -EOPNOTSUPP;
+ }
- /* Pilot doesn't exist in DVB-S, turn bit off */
+ /* Pilot doesn't exist in DVB-S, turn bit off */
+ state->dnxt.pilot_val = CX24116_PILOT_OFF;
+ retune = 1;
+
+ /* DVB-S only supports 0.35 */
+ if (c->rolloff != ROLLOFF_35) {
+ dprintk("%s: unsupported rolloff selected (%d)\n",
+ __func__, c->rolloff);
+ return -EOPNOTSUPP;
+ }
+ state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
+ break;
+
+ case SYS_DVBS2:
+ dprintk("%s: DVB-S2 delivery system selected\n", __func__);
+
+ /*
+ * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
+ * but not hardware auto detection
+ */
+ if (c->modulation != PSK_8 && c->modulation != QPSK) {
+ dprintk("%s: unsupported modulation selected (%d)\n",
+ __func__, c->modulation);
+ return -EOPNOTSUPP;
+ }
+
+ switch (c->pilot) {
+ case PILOT_AUTO: /* Not supported but emulated */
+ retune = 2; /* Fall-through */
+ case PILOT_OFF:
state->dnxt.pilot_val = CX24116_PILOT_OFF;
- retune = 1;
+ break;
+ case PILOT_ON:
+ state->dnxt.pilot_val = CX24116_PILOT_ON;
+ break;
+ default:
+ dprintk("%s: unsupported pilot mode selected (%d)\n",
+ __func__, c->pilot);
+ return -EOPNOTSUPP;
+ }
- /* DVB-S only supports 0.35 */
- if(c->rolloff != ROLLOFF_35) {
- dprintk("%s: unsupported rolloff selected (%d)\n",
- __func__, c->rolloff);
- return -EOPNOTSUPP;
- }
+ switch (c->rolloff) {
+ case ROLLOFF_20:
+ state->dnxt.rolloff_val = CX24116_ROLLOFF_020;
+ break;
+ case ROLLOFF_25:
+ state->dnxt.rolloff_val = CX24116_ROLLOFF_025;
+ break;
+ case ROLLOFF_35:
state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
break;
-
- case SYS_DVBS2:
- dprintk("%s: DVB-S2 delivery system selected\n",__func__);
-
- /*
- * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
- * but not hardware auto detection
- */
- if(c->modulation != PSK_8 && c->modulation != QPSK) {
- dprintk("%s: unsupported modulation selected (%d)\n",
- __func__, c->modulation);
- return -EOPNOTSUPP;
- }
-
- switch(c->pilot) {
- case PILOT_AUTO: /* Not supported but emulated */
- retune = 2; /* Fall-through */
- case PILOT_OFF:
- state->dnxt.pilot_val = CX24116_PILOT_OFF;
- break;
- case PILOT_ON:
- state->dnxt.pilot_val = CX24116_PILOT_ON;
- break;
- default:
- dprintk("%s: unsupported pilot mode selected (%d)\n",
- __func__, c->pilot);
- return -EOPNOTSUPP;
- }
-
- switch(c->rolloff) {
- case ROLLOFF_20:
- state->dnxt.rolloff_val= CX24116_ROLLOFF_020;
- break;
- case ROLLOFF_25:
- state->dnxt.rolloff_val= CX24116_ROLLOFF_025;
- break;
- case ROLLOFF_35:
- state->dnxt.rolloff_val= CX24116_ROLLOFF_035;
- break;
- case ROLLOFF_AUTO: /* Rolloff must be explicit */
- default:
- dprintk("%s: unsupported rolloff selected (%d)\n",
- __func__, c->rolloff);
- return -EOPNOTSUPP;
- }
- break;
-
+ case ROLLOFF_AUTO: /* Rolloff must be explicit */
default:
- dprintk("%s: unsupported delivery system selected (%d)\n",
- __func__, c->delivery_system);
+ dprintk("%s: unsupported rolloff selected (%d)\n",
+ __func__, c->rolloff);
return -EOPNOTSUPP;
+ }
+ break;
+
+ default:
+ dprintk("%s: unsupported delivery system selected (%d)\n",
+ __func__, c->delivery_system);
+ return -EOPNOTSUPP;
}
state->dnxt.modulation = c->modulation;
state->dnxt.frequency = c->frequency;
state->dnxt.pilot = c->pilot;
state->dnxt.rolloff = c->rolloff;
- if ((ret = cx24116_set_inversion(state, c->inversion)) != 0)
+ ret = cx24116_set_inversion(state, c->inversion);
+ if (ret != 0)
return ret;
/* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */
- if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0)
+ ret = cx24116_set_fec(state, c->modulation, c->fec_inner);
+ if (ret != 0)
return ret;
- if ((ret = cx24116_set_symbolrate(state, c->symbol_rate)) != 0)
+ ret = cx24116_set_symbolrate(state, c->symbol_rate);
+ if (ret != 0)
return ret;
/* discard the 'current' tuning parameters and prepare to tune */
@@ -1271,7 +1300,7 @@
/* Set/Reset B/W */
cmd.args[0x00] = CMD_BANDWIDTH;
cmd.args[0x01] = 0x01;
- cmd.len= 0x02;
+ cmd.len = 0x02;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -1319,7 +1348,7 @@
cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
}
- cmd.len= 0x13;
+ cmd.len = 0x13;
/* We need to support pilot and non-pilot tuning in the
* driver automatically. This is a workaround for because
@@ -1327,12 +1356,13 @@
*/
do {
/* Reset status register */
- status = cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK;
+ status = cx24116_readreg(state, CX24116_REG_SSTATUS)
+ & CX24116_SIGNAL_MASK;
cx24116_writereg(state, CX24116_REG_SSTATUS, status);
/* Tune */
ret = cx24116_cmd_execute(fe, &cmd);
- if( ret != 0 )
+ if (ret != 0)
break;
/*
@@ -1341,28 +1371,27 @@
* If we are able to tune then generally it occurs within 100ms.
* If it takes longer, try a different toneburst setting.
*/
- for(i = 0; i < 50 ; i++) {
+ for (i = 0; i < 50 ; i++) {
cx24116_read_status(fe, &tunerstat);
status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC);
- if(status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
- dprintk("%s: Tuned\n",__func__);
+ if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
+ dprintk("%s: Tuned\n", __func__);
goto tuned;
}
msleep(10);
}
- dprintk("%s: Not tuned\n",__func__);
+ dprintk("%s: Not tuned\n", __func__);
/* Toggle pilot bit when in auto-pilot */
- if(state->dcur.pilot == PILOT_AUTO)
+ if (state->dcur.pilot == PILOT_AUTO)
cmd.args[0x07] ^= CX24116_PILOT_ON;
- }
- while(--retune);
+ } while (--retune);
tuned: /* Set/Reset B/W */
cmd.args[0x00] = CMD_BANDWIDTH;
cmd.args[0x01] = 0x00;
- cmd.len= 0x02;
+ cmd.len = 0x02;
ret = cx24116_cmd_execute(fe, &cmd);
if (ret != 0)
return ret;
@@ -1407,17 +1436,7 @@
.set_frontend = cx24116_set_frontend,
};
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
-
-module_param(toneburst, int, 0644);
-MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)");
-
-module_param(esno_snr, int, 0644);
-MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)");
-
MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware");
MODULE_AUTHOR("Steven Toth");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(cx24116_attach);
diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h
index 2b09e10..4cb3ddd 100644
--- a/drivers/media/dvb/frontends/cx24116.h
+++ b/drivers/media/dvb/frontends/cx24116.h
@@ -23,31 +23,32 @@
#include <linux/dvb/frontend.h>
-struct cx24116_config
-{
+struct cx24116_config {
/* the demodulator's i2c address */
u8 demod_address;
/* Need to set device param for start_dma */
- int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+ int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
/* Need to reset device during firmware loading */
- int (*reset_device)(struct dvb_frontend* fe);
+ int (*reset_device)(struct dvb_frontend *fe);
/* Need to set MPEG parameters */
u8 mpg_clk_pos_pol:0x02;
};
#if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE)
-extern struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
- struct i2c_adapter* i2c);
+extern struct dvb_frontend *cx24116_attach(
+ const struct cx24116_config *config,
+ struct i2c_adapter *i2c);
#else
-static inline struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
- struct i2c_adapter* i2c)
+static inline struct dvb_frontend *cx24116_attach(
+ const struct cx24116_config *config,
+ struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
-#endif // CONFIG_DVB_CX24116
+#endif
#endif /* CX24116_H */