ARM: realview: add device tree and bindings for PB1176
As a first example, add device tree and bindings for the
RealView PB1176.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index c554ed3..556c866 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -92,3 +92,68 @@
- core-module: the root node to the Versatile platforms must have
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+ /* RealView Emulation Baseboard */
+ compatible = "arm,realview-eb";
+ /* RealView Platform Baseboard for ARM1176JZF-S */
+ compatible = "arm,realview-pb1176";
+ /* RealView Platform Baseboard for ARM11 MPCore */
+ compatible = "arm,realview-pb11mp";
+ /* RealView Platform Baseboard for Cortex A-8 */
+ compatible = "arm,realview-pba8";
+ /* RealView Platform Baseboard Explore for Cortex A-9 */
+ compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+ node that contain the SoC-specific devices, withe the compatible
+ string set to one of these tuples:
+ "arm,realview-eb-soc", "simple-bus"
+ "arm,realview-pb1176-soc", "simple-bus"
+ "arm,realview-pb11mp-soc", "simple-bus"
+ "arm,realview-pba8-soc", "simple-bus"
+ "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+ system controller node pointing to the control registers,
+ with the compatible string set to one of these tuples:
+ "arm,realview-eb-syscon", "syscon"
+ "arm,realview-pb1176-syscon", "syscon"
+ "arm,realview-pb11mp-syscon", "syscon"
+ "arm,realview-pba8-syscon", "syscon"
+ "arm,realview-pbx-syscon", "syscon"
+
+ Required properties for the system controller:
+ - regs: the location and size of the system controller registers,
+ one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176 with device tree";
+ compatible = "arm,realview-pb1176";
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+ };
+
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c7d2fa1..b38608a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -17,6 +17,7 @@
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
"brcm,brahma-b15-gic"
+ "arm,arm1176jzf-devchip-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..ab4435a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -363,6 +363,7 @@
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
new file mode 100644
index 0000000..3135939
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176";
+ compatible = "arm,realview-pb1176";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb1176_serial0;
+ serial1 = &pb1176_serial1;
+ serial2 = &pb1176_serial2;
+ serial3 = &pb1176_serial3;
+ };
+
+ memory {
+ /* 128 MiB memory @ 0x0 */
+ reg = <0x00000000 0x08000000>;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ regmap = <&syscon>;
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-pb1176-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+ };
+
+ /* Primary DevChip GIC synthesized with the CPU */
+ intc_dc1176: interrupt-controller@10120000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10121000 0x1000>,
+ <0x10120000 0x100>;
+ };
+
+ /* This GIC on the board is cascaded off the DevChip GIC */
+ intc_pb1176: interrupt-controller@10040000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x10110000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ /*
+ * Override default cache size, sets and
+ * associativity as these may be erroneously set
+ * up by boot loader(s).
+ */
+ arm,override-auxreg;
+ cache-size = <131072>; // 128kB
+ cache-sets = <512>;
+ cache-line-size = <32>;
+ };
+
+ pmu {
+ compatible = "arm,arm1176-pmu";
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer01: timer@10104000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10104000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer23: timer@10105000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10105000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ pb1176_serial0: serial@1010c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010c000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial1: serial@1010d000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010d000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial2: serial@1010e000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010e000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial3: serial@1010f000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010f000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+};