| /* |
| * |
| * Device driver for GPIO attached remote control interfaces |
| * on Conexant 2388x based TV/DVB cards. |
| * |
| * Copyright (c) 2003 Pavel Machek |
| * Copyright (c) 2004 Gerd Knorr |
| * Copyright (c) 2004, 2005 Chris Pascoe |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| |
| #include "cx88.h" |
| #include <media/ir-common.h> |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| struct cx88_IR { |
| struct cx88_core *core; |
| struct input_dev *input; |
| struct ir_input_state ir; |
| char name[32]; |
| char phys[32]; |
| |
| /* sample from gpio pin 16 */ |
| u32 sampling; |
| u32 samples[16]; |
| int scount; |
| unsigned long release; |
| |
| /* poll external decoder */ |
| int polling; |
| struct work_struct work; |
| struct timer_list timer; |
| u32 gpio_addr; |
| u32 last_gpio; |
| u32 mask_keycode; |
| u32 mask_keydown; |
| u32 mask_keyup; |
| }; |
| |
| static int ir_debug; |
| module_param(ir_debug, int, 0644); /* debug level [IR] */ |
| MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); |
| |
| #define ir_dprintk(fmt, arg...) if (ir_debug) \ |
| printk(KERN_DEBUG "%s IR: " fmt , ir->core->name , ##arg) |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void cx88_ir_handle_key(struct cx88_IR *ir) |
| { |
| struct cx88_core *core = ir->core; |
| u32 gpio, data, auxgpio; |
| |
| /* read gpio value */ |
| gpio = cx_read(ir->gpio_addr); |
| switch (core->boardnr) { |
| case CX88_BOARD_NPGTECH_REALTV_TOP10FM: |
| /* This board apparently uses a combination of 2 GPIO |
| to represent the keys. Additionally, the second GPIO |
| can be used for parity. |
| |
| Example: |
| |
| for key "5" |
| gpio = 0x758, auxgpio = 0xe5 or 0xf5 |
| for key "Power" |
| gpio = 0x758, auxgpio = 0xed or 0xfd |
| */ |
| |
| auxgpio = cx_read(MO_GP1_IO); |
| /* Take out the parity part */ |
| gpio=(gpio & 0x7fd) + (auxgpio & 0xef); |
| break; |
| case CX88_BOARD_WINFAST_DTV1000: |
| gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900); |
| auxgpio = gpio; |
| break; |
| default: |
| auxgpio = gpio; |
| } |
| if (ir->polling) { |
| if (ir->last_gpio == auxgpio) |
| return; |
| ir->last_gpio = auxgpio; |
| } |
| |
| /* extract data */ |
| data = ir_extract_bits(gpio, ir->mask_keycode); |
| ir_dprintk("irq gpio=0x%x code=%d | %s%s%s\n", |
| gpio, data, |
| ir->polling ? "poll" : "irq", |
| (gpio & ir->mask_keydown) ? " down" : "", |
| (gpio & ir->mask_keyup) ? " up" : ""); |
| |
| if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) { |
| u32 gpio_key = cx_read(MO_GP0_IO); |
| |
| data = (data << 4) | ((gpio_key & 0xf0) >> 4); |
| |
| ir_input_keydown(ir->input, &ir->ir, data, data); |
| ir_input_nokey(ir->input, &ir->ir); |
| |
| } else if (ir->mask_keydown) { |
| /* bit set on keydown */ |
| if (gpio & ir->mask_keydown) { |
| ir_input_keydown(ir->input, &ir->ir, data, data); |
| } else { |
| ir_input_nokey(ir->input, &ir->ir); |
| } |
| |
| } else if (ir->mask_keyup) { |
| /* bit cleared on keydown */ |
| if (0 == (gpio & ir->mask_keyup)) { |
| ir_input_keydown(ir->input, &ir->ir, data, data); |
| } else { |
| ir_input_nokey(ir->input, &ir->ir); |
| } |
| |
| } else { |
| /* can't distinguish keydown/up :-/ */ |
| ir_input_keydown(ir->input, &ir->ir, data, data); |
| ir_input_nokey(ir->input, &ir->ir); |
| } |
| } |
| |
| static void ir_timer(unsigned long data) |
| { |
| struct cx88_IR *ir = (struct cx88_IR *)data; |
| |
| schedule_work(&ir->work); |
| } |
| |
| static void cx88_ir_work(struct work_struct *work) |
| { |
| struct cx88_IR *ir = container_of(work, struct cx88_IR, work); |
| |
| cx88_ir_handle_key(ir); |
| mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling)); |
| } |
| |
| void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir) |
| { |
| if (ir->polling) { |
| setup_timer(&ir->timer, ir_timer, (unsigned long)ir); |
| INIT_WORK(&ir->work, cx88_ir_work); |
| schedule_work(&ir->work); |
| } |
| if (ir->sampling) { |
| core->pci_irqmask |= PCI_INT_IR_SMPINT; |
| cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */ |
| cx_write(MO_DDSCFG_IO, 0x5); /* enable */ |
| } |
| } |
| |
| void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir) |
| { |
| if (ir->sampling) { |
| cx_write(MO_DDSCFG_IO, 0x0); |
| core->pci_irqmask &= ~PCI_INT_IR_SMPINT; |
| } |
| |
| if (ir->polling) { |
| del_timer_sync(&ir->timer); |
| flush_scheduled_work(); |
| } |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) |
| { |
| struct cx88_IR *ir; |
| struct input_dev *input_dev; |
| IR_KEYTAB_TYPE *ir_codes = NULL; |
| int ir_type = IR_TYPE_OTHER; |
| int err = -ENOMEM; |
| |
| ir = kzalloc(sizeof(*ir), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!ir || !input_dev) |
| goto err_out_free; |
| |
| ir->input = input_dev; |
| |
| /* detect & configure */ |
| switch (core->boardnr) { |
| case CX88_BOARD_DNTV_LIVE_DVB_T: |
| case CX88_BOARD_KWORLD_DVB_T: |
| case CX88_BOARD_KWORLD_DVB_T_CX22702: |
| ir_codes = ir_codes_dntv_live_dvb_t; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x1f; |
| ir->mask_keyup = 0x60; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: |
| ir_codes = ir_codes_cinergy_1400; |
| ir_type = IR_TYPE_PD; |
| ir->sampling = 0xeb04; /* address */ |
| break; |
| case CX88_BOARD_HAUPPAUGE: |
| case CX88_BOARD_HAUPPAUGE_DVB_T1: |
| case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: |
| case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: |
| case CX88_BOARD_HAUPPAUGE_HVR1100: |
| case CX88_BOARD_HAUPPAUGE_HVR3000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000LITE: |
| case CX88_BOARD_PCHDTV_HD3000: |
| case CX88_BOARD_PCHDTV_HD5500: |
| ir_codes = ir_codes_hauppauge_new; |
| ir_type = IR_TYPE_RC5; |
| ir->sampling = 1; |
| break; |
| case CX88_BOARD_WINFAST_DTV2000H: |
| ir_codes = ir_codes_winfast; |
| ir->gpio_addr = MO_GP0_IO; |
| ir->mask_keycode = 0x8f8; |
| ir->mask_keyup = 0x100; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_WINFAST2000XP_EXPERT: |
| case CX88_BOARD_WINFAST_DTV1000: |
| ir_codes = ir_codes_winfast; |
| ir->gpio_addr = MO_GP0_IO; |
| ir->mask_keycode = 0x8f8; |
| ir->mask_keyup = 0x100; |
| ir->polling = 1; /* ms */ |
| break; |
| case CX88_BOARD_IODATA_GVBCTV7E: |
| ir_codes = ir_codes_iodata_bctv7e; |
| ir->gpio_addr = MO_GP0_IO; |
| ir->mask_keycode = 0xfd; |
| ir->mask_keydown = 0x02; |
| ir->polling = 5; /* ms */ |
| break; |
| case CX88_BOARD_PROLINK_PLAYTVPVR: |
| case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO: |
| ir_codes = ir_codes_pixelview; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x1f; |
| ir->mask_keyup = 0x80; |
| ir->polling = 1; /* ms */ |
| break; |
| case CX88_BOARD_PROLINK_PV_8000GT: |
| case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: |
| ir_codes = ir_codes_pixelview_new; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x3f; |
| ir->mask_keyup = 0x80; |
| ir->polling = 1; /* ms */ |
| break; |
| case CX88_BOARD_KWORLD_LTV883: |
| ir_codes = ir_codes_pixelview; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x1f; |
| ir->mask_keyup = 0x60; |
| ir->polling = 1; /* ms */ |
| break; |
| case CX88_BOARD_ADSTECH_DVB_T_PCI: |
| ir_codes = ir_codes_adstech_dvb_t_pci; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0xbf; |
| ir->mask_keyup = 0x40; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_MSI_TVANYWHERE_MASTER: |
| ir_codes = ir_codes_msi_tvanywhere; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x1f; |
| ir->mask_keyup = 0x40; |
| ir->polling = 1; /* ms */ |
| break; |
| case CX88_BOARD_AVERTV_303: |
| case CX88_BOARD_AVERTV_STUDIO_303: |
| ir_codes = ir_codes_avertv_303; |
| ir->gpio_addr = MO_GP2_IO; |
| ir->mask_keycode = 0xfb; |
| ir->mask_keydown = 0x02; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: |
| ir_codes = ir_codes_dntv_live_dvbt_pro; |
| ir_type = IR_TYPE_PD; |
| ir->sampling = 0xff00; /* address */ |
| break; |
| case CX88_BOARD_NORWOOD_MICRO: |
| ir_codes = ir_codes_norwood; |
| ir->gpio_addr = MO_GP1_IO; |
| ir->mask_keycode = 0x0e; |
| ir->mask_keyup = 0x80; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_NPGTECH_REALTV_TOP10FM: |
| ir_codes = ir_codes_npgtech; |
| ir->gpio_addr = MO_GP0_IO; |
| ir->mask_keycode = 0xfa; |
| ir->polling = 50; /* ms */ |
| break; |
| case CX88_BOARD_PINNACLE_PCTV_HD_800i: |
| ir_codes = ir_codes_pinnacle_pctv_hd; |
| ir_type = IR_TYPE_RC5; |
| ir->sampling = 1; |
| break; |
| case CX88_BOARD_POWERCOLOR_REAL_ANGEL: |
| ir_codes = ir_codes_powercolor_real_angel; |
| ir->gpio_addr = MO_GP2_IO; |
| ir->mask_keycode = 0x7e; |
| ir->polling = 100; /* ms */ |
| break; |
| } |
| |
| if (NULL == ir_codes) { |
| err = -ENODEV; |
| goto err_out_free; |
| } |
| |
| /* init input device */ |
| snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name); |
| snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci)); |
| |
| ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); |
| input_dev->name = ir->name; |
| input_dev->phys = ir->phys; |
| input_dev->id.bustype = BUS_PCI; |
| input_dev->id.version = 1; |
| if (pci->subsystem_vendor) { |
| input_dev->id.vendor = pci->subsystem_vendor; |
| input_dev->id.product = pci->subsystem_device; |
| } else { |
| input_dev->id.vendor = pci->vendor; |
| input_dev->id.product = pci->device; |
| } |
| input_dev->dev.parent = &pci->dev; |
| /* record handles to ourself */ |
| ir->core = core; |
| core->ir = ir; |
| |
| cx88_ir_start(core, ir); |
| |
| /* all done */ |
| err = input_register_device(ir->input); |
| if (err) |
| goto err_out_stop; |
| |
| return 0; |
| |
| err_out_stop: |
| cx88_ir_stop(core, ir); |
| core->ir = NULL; |
| err_out_free: |
| input_free_device(input_dev); |
| kfree(ir); |
| return err; |
| } |
| |
| int cx88_ir_fini(struct cx88_core *core) |
| { |
| struct cx88_IR *ir = core->ir; |
| |
| /* skip detach on non attached boards */ |
| if (NULL == ir) |
| return 0; |
| |
| cx88_ir_stop(core, ir); |
| input_unregister_device(ir->input); |
| kfree(ir); |
| |
| /* done */ |
| core->ir = NULL; |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| void cx88_ir_irq(struct cx88_core *core) |
| { |
| struct cx88_IR *ir = core->ir; |
| u32 samples, ircode; |
| int i, start, range, toggle, dev, code; |
| |
| if (NULL == ir) |
| return; |
| if (!ir->sampling) |
| return; |
| |
| samples = cx_read(MO_SAMPLE_IO); |
| if (0 != samples && 0xffffffff != samples) { |
| /* record sample data */ |
| if (ir->scount < ARRAY_SIZE(ir->samples)) |
| ir->samples[ir->scount++] = samples; |
| return; |
| } |
| if (!ir->scount) { |
| /* nothing to sample */ |
| if (ir->ir.keypressed && time_after(jiffies, ir->release)) |
| ir_input_nokey(ir->input, &ir->ir); |
| return; |
| } |
| |
| /* have a complete sample */ |
| if (ir->scount < ARRAY_SIZE(ir->samples)) |
| ir->samples[ir->scount++] = samples; |
| for (i = 0; i < ir->scount; i++) |
| ir->samples[i] = ~ir->samples[i]; |
| if (ir_debug) |
| ir_dump_samples(ir->samples, ir->scount); |
| |
| /* decode it */ |
| switch (core->boardnr) { |
| case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: |
| case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: |
| ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4); |
| |
| if (ircode == 0xffffffff) { /* decoding error */ |
| ir_dprintk("pulse distance decoding error\n"); |
| break; |
| } |
| |
| ir_dprintk("pulse distance decoded: %x\n", ircode); |
| |
| if (ircode == 0) { /* key still pressed */ |
| ir_dprintk("pulse distance decoded repeat code\n"); |
| ir->release = jiffies + msecs_to_jiffies(120); |
| break; |
| } |
| |
| if ((ircode & 0xffff) != (ir->sampling & 0xffff)) { /* wrong address */ |
| ir_dprintk("pulse distance decoded wrong address\n"); |
| break; |
| } |
| |
| if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */ |
| ir_dprintk("pulse distance decoded wrong check sum\n"); |
| break; |
| } |
| |
| ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f); |
| |
| ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff); |
| ir->release = jiffies + msecs_to_jiffies(120); |
| break; |
| case CX88_BOARD_HAUPPAUGE: |
| case CX88_BOARD_HAUPPAUGE_DVB_T1: |
| case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: |
| case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: |
| case CX88_BOARD_HAUPPAUGE_HVR1100: |
| case CX88_BOARD_HAUPPAUGE_HVR3000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000: |
| case CX88_BOARD_HAUPPAUGE_HVR4000LITE: |
| case CX88_BOARD_PCHDTV_HD3000: |
| case CX88_BOARD_PCHDTV_HD5500: |
| ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); |
| ir_dprintk("biphase decoded: %x\n", ircode); |
| /* |
| * RC5 has an extension bit which adds a new range |
| * of available codes, this is detected here. Also |
| * hauppauge remotes (black/silver) always use |
| * specific device ids. If we do not filter the |
| * device ids then messages destined for devices |
| * such as TVs (id=0) will get through to the |
| * device causing mis-fired events. |
| */ |
| /* split rc5 data block ... */ |
| start = (ircode & 0x2000) >> 13; |
| range = (ircode & 0x1000) >> 12; |
| toggle= (ircode & 0x0800) >> 11; |
| dev = (ircode & 0x07c0) >> 6; |
| code = (ircode & 0x003f) | ((range << 6) ^ 0x0040); |
| if( start != 1) |
| /* no key pressed */ |
| break; |
| if ( dev != 0x1e && dev != 0x1f ) |
| /* not a hauppauge remote */ |
| break; |
| ir_input_keydown(ir->input, &ir->ir, code, ircode); |
| ir->release = jiffies + msecs_to_jiffies(120); |
| break; |
| case CX88_BOARD_PINNACLE_PCTV_HD_800i: |
| ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); |
| ir_dprintk("biphase decoded: %x\n", ircode); |
| if ((ircode & 0xfffff000) != 0x3000) |
| break; |
| ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode); |
| ir->release = jiffies + msecs_to_jiffies(120); |
| break; |
| } |
| |
| ir->scount = 0; |
| return; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe"); |
| MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls"); |
| MODULE_LICENSE("GPL"); |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |