| /* |
| * TI QSPI driver |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Sourav Poddar <sourav.poddar@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GPLv2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/omap-dma.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pinctrl/consumer.h> |
| |
| #include <linux/spi/spi.h> |
| |
| struct ti_qspi_regs { |
| u32 clkctrl; |
| }; |
| |
| struct ti_qspi { |
| struct completion transfer_complete; |
| |
| /* list synchronization */ |
| struct mutex list_lock; |
| |
| struct spi_master *master; |
| void __iomem *base; |
| struct clk *fclk; |
| struct device *dev; |
| |
| struct ti_qspi_regs ctx_reg; |
| |
| u32 spi_max_frequency; |
| u32 cmd; |
| u32 dc; |
| }; |
| |
| #define QSPI_PID (0x0) |
| #define QSPI_SYSCONFIG (0x10) |
| #define QSPI_INTR_STATUS_RAW_SET (0x20) |
| #define QSPI_INTR_STATUS_ENABLED_CLEAR (0x24) |
| #define QSPI_INTR_ENABLE_SET_REG (0x28) |
| #define QSPI_INTR_ENABLE_CLEAR_REG (0x2c) |
| #define QSPI_SPI_CLOCK_CNTRL_REG (0x40) |
| #define QSPI_SPI_DC_REG (0x44) |
| #define QSPI_SPI_CMD_REG (0x48) |
| #define QSPI_SPI_STATUS_REG (0x4c) |
| #define QSPI_SPI_DATA_REG (0x50) |
| #define QSPI_SPI_SETUP0_REG (0x54) |
| #define QSPI_SPI_SWITCH_REG (0x64) |
| #define QSPI_SPI_SETUP1_REG (0x58) |
| #define QSPI_SPI_SETUP2_REG (0x5c) |
| #define QSPI_SPI_SETUP3_REG (0x60) |
| #define QSPI_SPI_DATA_REG_1 (0x68) |
| #define QSPI_SPI_DATA_REG_2 (0x6c) |
| #define QSPI_SPI_DATA_REG_3 (0x70) |
| |
| #define QSPI_COMPLETION_TIMEOUT msecs_to_jiffies(2000) |
| |
| #define QSPI_FCLK 192000000 |
| |
| /* Clock Control */ |
| #define QSPI_CLK_EN (1 << 31) |
| #define QSPI_CLK_DIV_MAX 0xffff |
| |
| /* Command */ |
| #define QSPI_EN_CS(n) (n << 28) |
| #define QSPI_WLEN(n) ((n - 1) << 19) |
| #define QSPI_3_PIN (1 << 18) |
| #define QSPI_RD_SNGL (1 << 16) |
| #define QSPI_WR_SNGL (2 << 16) |
| #define QSPI_RD_DUAL (3 << 16) |
| #define QSPI_RD_QUAD (7 << 16) |
| #define QSPI_INVAL (4 << 16) |
| #define QSPI_WC_CMD_INT_EN (1 << 14) |
| #define QSPI_FLEN(n) ((n - 1) << 0) |
| |
| /* STATUS REGISTER */ |
| #define WC 0x02 |
| |
| /* INTERRUPT REGISTER */ |
| #define QSPI_WC_INT_EN (1 << 1) |
| #define QSPI_WC_INT_DISABLE (1 << 1) |
| |
| /* Device Control */ |
| #define QSPI_DD(m, n) (m << (3 + n * 8)) |
| #define QSPI_CKPHA(n) (1 << (2 + n * 8)) |
| #define QSPI_CSPOL(n) (1 << (1 + n * 8)) |
| #define QSPI_CKPOL(n) (1 << (n * 8)) |
| |
| #define QSPI_FRAME 4096 |
| |
| #define QSPI_AUTOSUSPEND_TIMEOUT 2000 |
| |
| static inline unsigned long ti_qspi_read(struct ti_qspi *qspi, |
| unsigned long reg) |
| { |
| return readl(qspi->base + reg); |
| } |
| |
| static inline void ti_qspi_write(struct ti_qspi *qspi, |
| unsigned long val, unsigned long reg) |
| { |
| writel(val, qspi->base + reg); |
| } |
| |
| static int ti_qspi_setup(struct spi_device *spi) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(spi->master); |
| struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; |
| int clk_div = 0, ret; |
| u32 clk_ctrl_reg, clk_rate, clk_mask; |
| |
| if (spi->master->busy) { |
| dev_dbg(qspi->dev, "master busy doing other trasnfers\n"); |
| return -EBUSY; |
| } |
| |
| if (!qspi->spi_max_frequency) { |
| dev_err(qspi->dev, "spi max frequency not defined\n"); |
| return -EINVAL; |
| } |
| |
| clk_rate = clk_get_rate(qspi->fclk); |
| |
| clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1; |
| |
| if (clk_div < 0) { |
| dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n"); |
| return -EINVAL; |
| } |
| |
| if (clk_div > QSPI_CLK_DIV_MAX) { |
| dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n", |
| QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1); |
| return -EINVAL; |
| } |
| |
| dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", |
| qspi->spi_max_frequency, clk_div); |
| |
| ret = pm_runtime_get_sync(qspi->dev); |
| if (ret < 0) { |
| dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); |
| return ret; |
| } |
| |
| clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG); |
| |
| clk_ctrl_reg &= ~QSPI_CLK_EN; |
| |
| /* disable SCLK */ |
| ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG); |
| |
| /* enable SCLK */ |
| clk_mask = QSPI_CLK_EN | clk_div; |
| ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG); |
| ctx_reg->clkctrl = clk_mask; |
| |
| pm_runtime_mark_last_busy(qspi->dev); |
| ret = pm_runtime_put_autosuspend(qspi->dev); |
| if (ret < 0) { |
| dev_err(qspi->dev, "pm_runtime_put_autosuspend() failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void ti_qspi_restore_ctx(struct ti_qspi *qspi) |
| { |
| struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg; |
| |
| ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG); |
| } |
| |
| static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t) |
| { |
| int wlen, count, ret; |
| unsigned int cmd; |
| const u8 *txbuf; |
| |
| txbuf = t->tx_buf; |
| cmd = qspi->cmd | QSPI_WR_SNGL; |
| count = t->len; |
| wlen = t->bits_per_word; |
| |
| while (count) { |
| switch (wlen) { |
| case 8: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n", |
| cmd, qspi->dc, *txbuf); |
| writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG); |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| ret = wait_for_completion_timeout(&qspi->transfer_complete, |
| QSPI_COMPLETION_TIMEOUT); |
| if (ret == 0) { |
| dev_err(qspi->dev, "write timed out\n"); |
| return -ETIMEDOUT; |
| } |
| txbuf += 1; |
| count -= 1; |
| break; |
| case 16: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n", |
| cmd, qspi->dc, *txbuf); |
| writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG); |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| ret = wait_for_completion_timeout(&qspi->transfer_complete, |
| QSPI_COMPLETION_TIMEOUT); |
| if (ret == 0) { |
| dev_err(qspi->dev, "write timed out\n"); |
| return -ETIMEDOUT; |
| } |
| txbuf += 2; |
| count -= 2; |
| break; |
| case 32: |
| dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n", |
| cmd, qspi->dc, *txbuf); |
| writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG); |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| ret = wait_for_completion_timeout(&qspi->transfer_complete, |
| QSPI_COMPLETION_TIMEOUT); |
| if (ret == 0) { |
| dev_err(qspi->dev, "write timed out\n"); |
| return -ETIMEDOUT; |
| } |
| txbuf += 4; |
| count -= 4; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t) |
| { |
| int wlen, count, ret; |
| unsigned int cmd; |
| u8 *rxbuf; |
| |
| rxbuf = t->rx_buf; |
| cmd = qspi->cmd; |
| switch (t->rx_nbits) { |
| case SPI_NBITS_DUAL: |
| cmd |= QSPI_RD_DUAL; |
| break; |
| case SPI_NBITS_QUAD: |
| cmd |= QSPI_RD_QUAD; |
| break; |
| default: |
| cmd |= QSPI_RD_SNGL; |
| break; |
| } |
| count = t->len; |
| wlen = t->bits_per_word; |
| |
| while (count) { |
| dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc); |
| ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); |
| ret = wait_for_completion_timeout(&qspi->transfer_complete, |
| QSPI_COMPLETION_TIMEOUT); |
| if (ret == 0) { |
| dev_err(qspi->dev, "read timed out\n"); |
| return -ETIMEDOUT; |
| } |
| switch (wlen) { |
| case 8: |
| *rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG); |
| rxbuf += 1; |
| count -= 1; |
| break; |
| case 16: |
| *((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG); |
| rxbuf += 2; |
| count -= 2; |
| break; |
| case 32: |
| *((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG); |
| rxbuf += 4; |
| count -= 4; |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t) |
| { |
| int ret; |
| |
| if (t->tx_buf) { |
| ret = qspi_write_msg(qspi, t); |
| if (ret) { |
| dev_dbg(qspi->dev, "Error while writing\n"); |
| return ret; |
| } |
| } |
| |
| if (t->rx_buf) { |
| ret = qspi_read_msg(qspi, t); |
| if (ret) { |
| dev_dbg(qspi->dev, "Error while reading\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ti_qspi_start_transfer_one(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct ti_qspi *qspi = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| struct spi_transfer *t; |
| int status = 0, ret; |
| int frame_length; |
| |
| /* setup device control reg */ |
| qspi->dc = 0; |
| |
| if (spi->mode & SPI_CPHA) |
| qspi->dc |= QSPI_CKPHA(spi->chip_select); |
| if (spi->mode & SPI_CPOL) |
| qspi->dc |= QSPI_CKPOL(spi->chip_select); |
| if (spi->mode & SPI_CS_HIGH) |
| qspi->dc |= QSPI_CSPOL(spi->chip_select); |
| |
| frame_length = (m->frame_length << 3) / spi->bits_per_word; |
| |
| frame_length = clamp(frame_length, 0, QSPI_FRAME); |
| |
| /* setup command reg */ |
| qspi->cmd = 0; |
| qspi->cmd |= QSPI_EN_CS(spi->chip_select); |
| qspi->cmd |= QSPI_FLEN(frame_length); |
| qspi->cmd |= QSPI_WC_CMD_INT_EN; |
| |
| ti_qspi_write(qspi, QSPI_WC_INT_EN, QSPI_INTR_ENABLE_SET_REG); |
| ti_qspi_write(qspi, qspi->dc, QSPI_SPI_DC_REG); |
| |
| mutex_lock(&qspi->list_lock); |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| qspi->cmd |= QSPI_WLEN(t->bits_per_word); |
| |
| ret = qspi_transfer_msg(qspi, t); |
| if (ret) { |
| dev_dbg(qspi->dev, "transfer message failed\n"); |
| mutex_unlock(&qspi->list_lock); |
| return -EINVAL; |
| } |
| |
| m->actual_length += t->len; |
| } |
| |
| mutex_unlock(&qspi->list_lock); |
| |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG); |
| |
| return status; |
| } |
| |
| static irqreturn_t ti_qspi_isr(int irq, void *dev_id) |
| { |
| struct ti_qspi *qspi = dev_id; |
| u16 int_stat; |
| u32 stat; |
| |
| irqreturn_t ret = IRQ_HANDLED; |
| |
| int_stat = ti_qspi_read(qspi, QSPI_INTR_STATUS_ENABLED_CLEAR); |
| stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG); |
| |
| if (!int_stat) { |
| dev_dbg(qspi->dev, "No IRQ triggered\n"); |
| ret = IRQ_NONE; |
| goto out; |
| } |
| |
| ti_qspi_write(qspi, QSPI_WC_INT_DISABLE, |
| QSPI_INTR_STATUS_ENABLED_CLEAR); |
| if (stat & WC) |
| complete(&qspi->transfer_complete); |
| out: |
| return ret; |
| } |
| |
| static int ti_qspi_runtime_resume(struct device *dev) |
| { |
| struct ti_qspi *qspi; |
| |
| qspi = dev_get_drvdata(dev); |
| ti_qspi_restore_ctx(qspi); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ti_qspi_match[] = { |
| {.compatible = "ti,dra7xxx-qspi" }, |
| {.compatible = "ti,am4372-qspi" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ti_qspi_match); |
| |
| static int ti_qspi_probe(struct platform_device *pdev) |
| { |
| struct ti_qspi *qspi; |
| struct spi_master *master; |
| struct resource *r; |
| struct device_node *np = pdev->dev.of_node; |
| u32 max_freq; |
| int ret = 0, num_cs, irq; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*qspi)); |
| if (!master) |
| return -ENOMEM; |
| |
| master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD; |
| |
| master->bus_num = -1; |
| master->flags = SPI_MASTER_HALF_DUPLEX; |
| master->setup = ti_qspi_setup; |
| master->auto_runtime_pm = true; |
| master->transfer_one_message = ti_qspi_start_transfer_one; |
| master->dev.of_node = pdev->dev.of_node; |
| master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1); |
| |
| if (!of_property_read_u32(np, "num-cs", &num_cs)) |
| master->num_chipselect = num_cs; |
| |
| qspi = spi_master_get_devdata(master); |
| qspi->master = master; |
| qspi->dev = &pdev->dev; |
| platform_set_drvdata(pdev, qspi); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq resource?\n"); |
| return irq; |
| } |
| |
| mutex_init(&qspi->list_lock); |
| |
| qspi->base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(qspi->base)) { |
| ret = PTR_ERR(qspi->base); |
| goto free_master; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, ti_qspi_isr, 0, |
| dev_name(&pdev->dev), qspi); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", |
| irq); |
| goto free_master; |
| } |
| |
| qspi->fclk = devm_clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(qspi->fclk)) { |
| ret = PTR_ERR(qspi->fclk); |
| dev_err(&pdev->dev, "could not get clk: %d\n", ret); |
| } |
| |
| init_completion(&qspi->transfer_complete); |
| |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, QSPI_AUTOSUSPEND_TIMEOUT); |
| pm_runtime_enable(&pdev->dev); |
| |
| if (!of_property_read_u32(np, "spi-max-frequency", &max_freq)) |
| qspi->spi_max_frequency = max_freq; |
| |
| ret = devm_spi_register_master(&pdev->dev, master); |
| if (ret) |
| goto free_master; |
| |
| return 0; |
| |
| free_master: |
| spi_master_put(master); |
| return ret; |
| } |
| |
| static int ti_qspi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct ti_qspi *qspi; |
| int ret; |
| |
| master = platform_get_drvdata(pdev); |
| qspi = spi_master_get_devdata(master); |
| |
| ret = pm_runtime_get_sync(qspi->dev); |
| if (ret < 0) { |
| dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); |
| return ret; |
| } |
| |
| ti_qspi_write(qspi, QSPI_WC_INT_DISABLE, QSPI_INTR_ENABLE_CLEAR_REG); |
| |
| pm_runtime_put(qspi->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| spi_unregister_master(master); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops ti_qspi_pm_ops = { |
| .runtime_resume = ti_qspi_runtime_resume, |
| }; |
| |
| static struct platform_driver ti_qspi_driver = { |
| .probe = ti_qspi_probe, |
| .remove = ti_qspi_remove, |
| .driver = { |
| .name = "ti,dra7xxx-qspi", |
| .owner = THIS_MODULE, |
| .pm = &ti_qspi_pm_ops, |
| .of_match_table = ti_qspi_match, |
| } |
| }; |
| |
| module_platform_driver(ti_qspi_driver); |
| |
| MODULE_AUTHOR("Sourav Poddar <sourav.poddar@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("TI QSPI controller driver"); |