| /* exynos_drm_fimd.c |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Authors: |
| * Joonyoung Shim <jy0922.shim@samsung.com> |
| * Inki Dae <inki.dae@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include "drmP.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <drm/exynos_drm.h> |
| #include <plat/regs-fb-v4.h> |
| |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_fbdev.h" |
| #include "exynos_drm_crtc.h" |
| |
| /* |
| * FIMD is stand for Fully Interactive Mobile Display and |
| * as a display controller, it transfers contents drawn on memory |
| * to a LCD Panel through Display Interfaces such as RGB or |
| * CPU Interface. |
| */ |
| |
| /* position control register for hardware window 0, 2 ~ 4.*/ |
| #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16) |
| #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16) |
| /* size control register for hardware window 0. */ |
| #define VIDOSD_C_SIZE_W0 (VIDOSD_BASE + 0x08) |
| /* alpha control register for hardware window 1 ~ 4. */ |
| #define VIDOSD_C(win) (VIDOSD_BASE + 0x18 + (win) * 16) |
| /* size control register for hardware window 1 ~ 4. */ |
| #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16) |
| |
| #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8) |
| #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8) |
| #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4) |
| |
| /* color key control register for hardware window 1 ~ 4. */ |
| #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + (x * 8)) |
| /* color key value register for hardware window 1 ~ 4. */ |
| #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + (x * 8)) |
| |
| /* FIMD has totally five hardware windows. */ |
| #define WINDOWS_NR 5 |
| |
| #define get_fimd_context(dev) platform_get_drvdata(to_platform_device(dev)) |
| |
| struct fimd_win_data { |
| unsigned int offset_x; |
| unsigned int offset_y; |
| unsigned int ovl_width; |
| unsigned int ovl_height; |
| unsigned int fb_width; |
| unsigned int fb_height; |
| unsigned int bpp; |
| dma_addr_t dma_addr; |
| void __iomem *vaddr; |
| unsigned int buf_offsize; |
| unsigned int line_size; /* bytes */ |
| bool enabled; |
| }; |
| |
| struct fimd_context { |
| struct exynos_drm_subdrv subdrv; |
| int irq; |
| struct drm_crtc *crtc; |
| struct clk *bus_clk; |
| struct clk *lcd_clk; |
| struct resource *regs_res; |
| void __iomem *regs; |
| struct fimd_win_data win_data[WINDOWS_NR]; |
| unsigned int clkdiv; |
| unsigned int default_win; |
| unsigned long irq_flags; |
| u32 vidcon0; |
| u32 vidcon1; |
| bool suspended; |
| struct mutex lock; |
| |
| struct fb_videomode *timing; |
| }; |
| |
| static bool fimd_display_is_connected(struct device *dev) |
| { |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* TODO. */ |
| |
| return true; |
| } |
| |
| static void *fimd_get_timing(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| return ctx->timing; |
| } |
| |
| static int fimd_check_timing(struct device *dev, void *timing) |
| { |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* TODO. */ |
| |
| return 0; |
| } |
| |
| static int fimd_display_power_on(struct device *dev, int mode) |
| { |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* TODO */ |
| |
| return 0; |
| } |
| |
| static struct exynos_drm_display_ops fimd_display_ops = { |
| .type = EXYNOS_DISPLAY_TYPE_LCD, |
| .is_connected = fimd_display_is_connected, |
| .get_timing = fimd_get_timing, |
| .check_timing = fimd_check_timing, |
| .power_on = fimd_display_power_on, |
| }; |
| |
| static void fimd_dpms(struct device *subdrv_dev, int mode) |
| { |
| struct fimd_context *ctx = get_fimd_context(subdrv_dev); |
| |
| DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode); |
| |
| mutex_lock(&ctx->lock); |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| /* |
| * enable fimd hardware only if suspended status. |
| * |
| * P.S. fimd_dpms function would be called at booting time so |
| * clk_enable could be called double time. |
| */ |
| if (ctx->suspended) |
| pm_runtime_get_sync(subdrv_dev); |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| case DRM_MODE_DPMS_SUSPEND: |
| case DRM_MODE_DPMS_OFF: |
| if (!ctx->suspended) |
| pm_runtime_put_sync(subdrv_dev); |
| break; |
| default: |
| DRM_DEBUG_KMS("unspecified mode %d\n", mode); |
| break; |
| } |
| |
| mutex_unlock(&ctx->lock); |
| } |
| |
| static void fimd_apply(struct device *subdrv_dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(subdrv_dev); |
| struct exynos_drm_manager *mgr = &ctx->subdrv.manager; |
| struct exynos_drm_manager_ops *mgr_ops = mgr->ops; |
| struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops; |
| struct fimd_win_data *win_data; |
| int i; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| for (i = 0; i < WINDOWS_NR; i++) { |
| win_data = &ctx->win_data[i]; |
| if (win_data->enabled && (ovl_ops && ovl_ops->commit)) |
| ovl_ops->commit(subdrv_dev, i); |
| } |
| |
| if (mgr_ops && mgr_ops->commit) |
| mgr_ops->commit(subdrv_dev); |
| } |
| |
| static void fimd_commit(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| struct fb_videomode *timing = ctx->timing; |
| u32 val; |
| |
| if (ctx->suspended) |
| return; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* setup polarity values from machine code. */ |
| writel(ctx->vidcon1, ctx->regs + VIDCON1); |
| |
| /* setup vertical timing values. */ |
| val = VIDTCON0_VBPD(timing->upper_margin - 1) | |
| VIDTCON0_VFPD(timing->lower_margin - 1) | |
| VIDTCON0_VSPW(timing->vsync_len - 1); |
| writel(val, ctx->regs + VIDTCON0); |
| |
| /* setup horizontal timing values. */ |
| val = VIDTCON1_HBPD(timing->left_margin - 1) | |
| VIDTCON1_HFPD(timing->right_margin - 1) | |
| VIDTCON1_HSPW(timing->hsync_len - 1); |
| writel(val, ctx->regs + VIDTCON1); |
| |
| /* setup horizontal and vertical display size. */ |
| val = VIDTCON2_LINEVAL(timing->yres - 1) | |
| VIDTCON2_HOZVAL(timing->xres - 1); |
| writel(val, ctx->regs + VIDTCON2); |
| |
| /* setup clock source, clock divider, enable dma. */ |
| val = ctx->vidcon0; |
| val &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); |
| |
| if (ctx->clkdiv > 1) |
| val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR; |
| else |
| val &= ~VIDCON0_CLKDIR; /* 1:1 clock */ |
| |
| /* |
| * fields of register with prefix '_F' would be updated |
| * at vsync(same as dma start) |
| */ |
| val |= VIDCON0_ENVID | VIDCON0_ENVID_F; |
| writel(val, ctx->regs + VIDCON0); |
| } |
| |
| static int fimd_enable_vblank(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| u32 val; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (ctx->suspended) |
| return -EPERM; |
| |
| if (!test_and_set_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val |= VIDINTCON0_INT_ENABLE; |
| val |= VIDINTCON0_INT_FRAME; |
| |
| val &= ~VIDINTCON0_FRAMESEL0_MASK; |
| val |= VIDINTCON0_FRAMESEL0_VSYNC; |
| val &= ~VIDINTCON0_FRAMESEL1_MASK; |
| val |= VIDINTCON0_FRAMESEL1_NONE; |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| |
| return 0; |
| } |
| |
| static void fimd_disable_vblank(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| u32 val; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (ctx->suspended) |
| return; |
| |
| if (test_and_clear_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val &= ~VIDINTCON0_INT_FRAME; |
| val &= ~VIDINTCON0_INT_ENABLE; |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| } |
| |
| static struct exynos_drm_manager_ops fimd_manager_ops = { |
| .dpms = fimd_dpms, |
| .apply = fimd_apply, |
| .commit = fimd_commit, |
| .enable_vblank = fimd_enable_vblank, |
| .disable_vblank = fimd_disable_vblank, |
| }; |
| |
| static void fimd_win_mode_set(struct device *dev, |
| struct exynos_drm_overlay *overlay) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| struct fimd_win_data *win_data; |
| int win; |
| unsigned long offset; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (!overlay) { |
| dev_err(dev, "overlay is NULL\n"); |
| return; |
| } |
| |
| win = overlay->zpos; |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win > WINDOWS_NR) |
| return; |
| |
| offset = overlay->fb_x * (overlay->bpp >> 3); |
| offset += overlay->fb_y * overlay->pitch; |
| |
| DRM_DEBUG_KMS("offset = 0x%lx, pitch = %x\n", offset, overlay->pitch); |
| |
| win_data = &ctx->win_data[win]; |
| |
| win_data->offset_x = overlay->crtc_x; |
| win_data->offset_y = overlay->crtc_y; |
| win_data->ovl_width = overlay->crtc_width; |
| win_data->ovl_height = overlay->crtc_height; |
| win_data->fb_width = overlay->fb_width; |
| win_data->fb_height = overlay->fb_height; |
| win_data->dma_addr = overlay->dma_addr[0] + offset; |
| win_data->vaddr = overlay->vaddr[0] + offset; |
| win_data->bpp = overlay->bpp; |
| win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) * |
| (overlay->bpp >> 3); |
| win_data->line_size = overlay->crtc_width * (overlay->bpp >> 3); |
| |
| DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n", |
| win_data->offset_x, win_data->offset_y); |
| DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", |
| win_data->ovl_width, win_data->ovl_height); |
| DRM_DEBUG_KMS("paddr = 0x%lx, vaddr = 0x%lx\n", |
| (unsigned long)win_data->dma_addr, |
| (unsigned long)win_data->vaddr); |
| DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n", |
| overlay->fb_width, overlay->crtc_width); |
| } |
| |
| static void fimd_win_set_pixfmt(struct device *dev, unsigned int win) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| struct fimd_win_data *win_data = &ctx->win_data[win]; |
| unsigned long val; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| val = WINCONx_ENWIN; |
| |
| switch (win_data->bpp) { |
| case 1: |
| val |= WINCON0_BPPMODE_1BPP; |
| val |= WINCONx_BITSWP; |
| val |= WINCONx_BURSTLEN_4WORD; |
| break; |
| case 2: |
| val |= WINCON0_BPPMODE_2BPP; |
| val |= WINCONx_BITSWP; |
| val |= WINCONx_BURSTLEN_8WORD; |
| break; |
| case 4: |
| val |= WINCON0_BPPMODE_4BPP; |
| val |= WINCONx_BITSWP; |
| val |= WINCONx_BURSTLEN_8WORD; |
| break; |
| case 8: |
| val |= WINCON0_BPPMODE_8BPP_PALETTE; |
| val |= WINCONx_BURSTLEN_8WORD; |
| val |= WINCONx_BYTSWP; |
| break; |
| case 16: |
| val |= WINCON0_BPPMODE_16BPP_565; |
| val |= WINCONx_HAWSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case 24: |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case 32: |
| val |= WINCON1_BPPMODE_28BPP_A4888 |
| | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| default: |
| DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n"); |
| |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| } |
| |
| DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp); |
| |
| writel(val, ctx->regs + WINCON(win)); |
| } |
| |
| static void fimd_win_set_colkey(struct device *dev, unsigned int win) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| unsigned int keycon0 = 0, keycon1 = 0; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | |
| WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); |
| |
| keycon1 = WxKEYCON1_COLVAL(0xffffffff); |
| |
| writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); |
| writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); |
| } |
| |
| static void fimd_win_commit(struct device *dev, int zpos) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| struct fimd_win_data *win_data; |
| int win = zpos; |
| unsigned long val, alpha, size; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (ctx->suspended) |
| return; |
| |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win > WINDOWS_NR) |
| return; |
| |
| win_data = &ctx->win_data[win]; |
| |
| /* |
| * SHADOWCON register is used for enabling timing. |
| * |
| * for example, once only width value of a register is set, |
| * if the dma is started then fimd hardware could malfunction so |
| * with protect window setting, the register fields with prefix '_F' |
| * wouldn't be updated at vsync also but updated once unprotect window |
| * is set. |
| */ |
| |
| /* protect windows */ |
| val = readl(ctx->regs + SHADOWCON); |
| val |= SHADOWCON_WINx_PROTECT(win); |
| writel(val, ctx->regs + SHADOWCON); |
| |
| /* buffer start address */ |
| val = (unsigned long)win_data->dma_addr; |
| writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); |
| |
| /* buffer end address */ |
| size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3); |
| val = (unsigned long)(win_data->dma_addr + size); |
| writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); |
| |
| DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", |
| (unsigned long)win_data->dma_addr, val, size); |
| DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", |
| win_data->ovl_width, win_data->ovl_height); |
| |
| /* buffer size */ |
| val = VIDW_BUF_SIZE_OFFSET(win_data->buf_offsize) | |
| VIDW_BUF_SIZE_PAGEWIDTH(win_data->line_size); |
| writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0)); |
| |
| /* OSD position */ |
| val = VIDOSDxA_TOPLEFT_X(win_data->offset_x) | |
| VIDOSDxA_TOPLEFT_Y(win_data->offset_y); |
| writel(val, ctx->regs + VIDOSD_A(win)); |
| |
| val = VIDOSDxB_BOTRIGHT_X(win_data->offset_x + |
| win_data->ovl_width - 1) | |
| VIDOSDxB_BOTRIGHT_Y(win_data->offset_y + |
| win_data->ovl_height - 1); |
| writel(val, ctx->regs + VIDOSD_B(win)); |
| |
| DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", |
| win_data->offset_x, win_data->offset_y, |
| win_data->offset_x + win_data->ovl_width - 1, |
| win_data->offset_y + win_data->ovl_height - 1); |
| |
| /* hardware window 0 doesn't support alpha channel. */ |
| if (win != 0) { |
| /* OSD alpha */ |
| alpha = VIDISD14C_ALPHA1_R(0xf) | |
| VIDISD14C_ALPHA1_G(0xf) | |
| VIDISD14C_ALPHA1_B(0xf); |
| |
| writel(alpha, ctx->regs + VIDOSD_C(win)); |
| } |
| |
| /* OSD size */ |
| if (win != 3 && win != 4) { |
| u32 offset = VIDOSD_D(win); |
| if (win == 0) |
| offset = VIDOSD_C_SIZE_W0; |
| val = win_data->ovl_width * win_data->ovl_height; |
| writel(val, ctx->regs + offset); |
| |
| DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val); |
| } |
| |
| fimd_win_set_pixfmt(dev, win); |
| |
| /* hardware window 0 doesn't support color key. */ |
| if (win != 0) |
| fimd_win_set_colkey(dev, win); |
| |
| /* wincon */ |
| val = readl(ctx->regs + WINCON(win)); |
| val |= WINCONx_ENWIN; |
| writel(val, ctx->regs + WINCON(win)); |
| |
| /* Enable DMA channel and unprotect windows */ |
| val = readl(ctx->regs + SHADOWCON); |
| val |= SHADOWCON_CHx_ENABLE(win); |
| val &= ~SHADOWCON_WINx_PROTECT(win); |
| writel(val, ctx->regs + SHADOWCON); |
| |
| win_data->enabled = true; |
| } |
| |
| static void fimd_win_disable(struct device *dev, int zpos) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| struct fimd_win_data *win_data; |
| int win = zpos; |
| u32 val; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win > WINDOWS_NR) |
| return; |
| |
| win_data = &ctx->win_data[win]; |
| |
| /* protect windows */ |
| val = readl(ctx->regs + SHADOWCON); |
| val |= SHADOWCON_WINx_PROTECT(win); |
| writel(val, ctx->regs + SHADOWCON); |
| |
| /* wincon */ |
| val = readl(ctx->regs + WINCON(win)); |
| val &= ~WINCONx_ENWIN; |
| writel(val, ctx->regs + WINCON(win)); |
| |
| /* unprotect windows */ |
| val = readl(ctx->regs + SHADOWCON); |
| val &= ~SHADOWCON_CHx_ENABLE(win); |
| val &= ~SHADOWCON_WINx_PROTECT(win); |
| writel(val, ctx->regs + SHADOWCON); |
| |
| win_data->enabled = false; |
| } |
| |
| static struct exynos_drm_overlay_ops fimd_overlay_ops = { |
| .mode_set = fimd_win_mode_set, |
| .commit = fimd_win_commit, |
| .disable = fimd_win_disable, |
| }; |
| |
| static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc) |
| { |
| struct exynos_drm_private *dev_priv = drm_dev->dev_private; |
| struct drm_pending_vblank_event *e, *t; |
| struct timeval now; |
| unsigned long flags; |
| bool is_checked = false; |
| |
| spin_lock_irqsave(&drm_dev->event_lock, flags); |
| |
| list_for_each_entry_safe(e, t, &dev_priv->pageflip_event_list, |
| base.link) { |
| /* if event's pipe isn't same as crtc then ignore it. */ |
| if (crtc != e->pipe) |
| continue; |
| |
| is_checked = true; |
| |
| do_gettimeofday(&now); |
| e->event.sequence = 0; |
| e->event.tv_sec = now.tv_sec; |
| e->event.tv_usec = now.tv_usec; |
| |
| list_move_tail(&e->base.link, &e->base.file_priv->event_list); |
| wake_up_interruptible(&e->base.file_priv->event_wait); |
| } |
| |
| if (is_checked) { |
| drm_vblank_put(drm_dev, crtc); |
| |
| /* |
| * don't off vblank if vblank_disable_allowed is 1, |
| * because vblank would be off by timer handler. |
| */ |
| if (!drm_dev->vblank_disable_allowed) |
| drm_vblank_off(drm_dev, crtc); |
| } |
| |
| spin_unlock_irqrestore(&drm_dev->event_lock, flags); |
| } |
| |
| static irqreturn_t fimd_irq_handler(int irq, void *dev_id) |
| { |
| struct fimd_context *ctx = (struct fimd_context *)dev_id; |
| struct exynos_drm_subdrv *subdrv = &ctx->subdrv; |
| struct drm_device *drm_dev = subdrv->drm_dev; |
| struct exynos_drm_manager *manager = &subdrv->manager; |
| u32 val; |
| |
| val = readl(ctx->regs + VIDINTCON1); |
| |
| if (val & VIDINTCON1_INT_FRAME) |
| /* VSYNC interrupt */ |
| writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1); |
| |
| /* check the crtc is detached already from encoder */ |
| if (manager->pipe < 0) |
| goto out; |
| |
| drm_handle_vblank(drm_dev, manager->pipe); |
| fimd_finish_pageflip(drm_dev, manager->pipe); |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int fimd_subdrv_probe(struct drm_device *drm_dev, struct device *dev) |
| { |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* |
| * enable drm irq mode. |
| * - with irq_enabled = 1, we can use the vblank feature. |
| * |
| * P.S. note that we wouldn't use drm irq handler but |
| * just specific driver own one instead because |
| * drm framework supports only one irq handler. |
| */ |
| drm_dev->irq_enabled = 1; |
| |
| /* |
| * with vblank_disable_allowed = 1, vblank interrupt will be disabled |
| * by drm timer once a current process gives up ownership of |
| * vblank event.(after drm_vblank_put function is called) |
| */ |
| drm_dev->vblank_disable_allowed = 1; |
| |
| return 0; |
| } |
| |
| static void fimd_subdrv_remove(struct drm_device *drm_dev) |
| { |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* TODO. */ |
| } |
| |
| static int fimd_calc_clkdiv(struct fimd_context *ctx, |
| struct fb_videomode *timing) |
| { |
| unsigned long clk = clk_get_rate(ctx->lcd_clk); |
| u32 retrace; |
| u32 clkdiv; |
| u32 best_framerate = 0; |
| u32 framerate; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| retrace = timing->left_margin + timing->hsync_len + |
| timing->right_margin + timing->xres; |
| retrace *= timing->upper_margin + timing->vsync_len + |
| timing->lower_margin + timing->yres; |
| |
| /* default framerate is 60Hz */ |
| if (!timing->refresh) |
| timing->refresh = 60; |
| |
| clk /= retrace; |
| |
| for (clkdiv = 1; clkdiv < 0x100; clkdiv++) { |
| int tmp; |
| |
| /* get best framerate */ |
| framerate = clk / clkdiv; |
| tmp = timing->refresh - framerate; |
| if (tmp < 0) { |
| best_framerate = framerate; |
| continue; |
| } else { |
| if (!best_framerate) |
| best_framerate = framerate; |
| else if (tmp < (best_framerate - framerate)) |
| best_framerate = framerate; |
| break; |
| } |
| } |
| |
| return clkdiv; |
| } |
| |
| static void fimd_clear_win(struct fimd_context *ctx, int win) |
| { |
| u32 val; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| writel(0, ctx->regs + WINCON(win)); |
| writel(0, ctx->regs + VIDOSD_A(win)); |
| writel(0, ctx->regs + VIDOSD_B(win)); |
| writel(0, ctx->regs + VIDOSD_C(win)); |
| |
| if (win == 1 || win == 2) |
| writel(0, ctx->regs + VIDOSD_D(win)); |
| |
| val = readl(ctx->regs + SHADOWCON); |
| val &= ~SHADOWCON_WINx_PROTECT(win); |
| writel(val, ctx->regs + SHADOWCON); |
| } |
| |
| static int fimd_power_on(struct fimd_context *ctx, bool enable) |
| { |
| struct exynos_drm_subdrv *subdrv = &ctx->subdrv; |
| struct device *dev = subdrv->manager.dev; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| if (enable != false && enable != true) |
| return -EINVAL; |
| |
| if (enable) { |
| int ret; |
| |
| ret = clk_enable(ctx->bus_clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_enable(ctx->lcd_clk); |
| if (ret < 0) { |
| clk_disable(ctx->bus_clk); |
| return ret; |
| } |
| |
| ctx->suspended = false; |
| |
| /* if vblank was enabled status, enable it again. */ |
| if (test_and_clear_bit(0, &ctx->irq_flags)) |
| fimd_enable_vblank(dev); |
| |
| fimd_apply(dev); |
| } else { |
| clk_disable(ctx->lcd_clk); |
| clk_disable(ctx->bus_clk); |
| |
| ctx->suspended = true; |
| } |
| |
| return 0; |
| } |
| |
| static int __devinit fimd_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct fimd_context *ctx; |
| struct exynos_drm_subdrv *subdrv; |
| struct exynos_drm_fimd_pdata *pdata; |
| struct fb_videomode *timing; |
| struct resource *res; |
| int win; |
| int ret = -EINVAL; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| pdata = pdev->dev.platform_data; |
| if (!pdata) { |
| dev_err(dev, "no platform data specified\n"); |
| return -EINVAL; |
| } |
| |
| timing = &pdata->timing; |
| if (!timing) { |
| dev_err(dev, "timing is null.\n"); |
| return -EINVAL; |
| } |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->bus_clk = clk_get(dev, "fimd"); |
| if (IS_ERR(ctx->bus_clk)) { |
| dev_err(dev, "failed to get bus clock\n"); |
| ret = PTR_ERR(ctx->bus_clk); |
| goto err_clk_get; |
| } |
| |
| clk_enable(ctx->bus_clk); |
| |
| ctx->lcd_clk = clk_get(dev, "sclk_fimd"); |
| if (IS_ERR(ctx->lcd_clk)) { |
| dev_err(dev, "failed to get lcd clock\n"); |
| ret = PTR_ERR(ctx->lcd_clk); |
| goto err_bus_clk; |
| } |
| |
| clk_enable(ctx->lcd_clk); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "failed to find registers\n"); |
| ret = -ENOENT; |
| goto err_clk; |
| } |
| |
| ctx->regs_res = request_mem_region(res->start, resource_size(res), |
| dev_name(dev)); |
| if (!ctx->regs_res) { |
| dev_err(dev, "failed to claim register region\n"); |
| ret = -ENOENT; |
| goto err_clk; |
| } |
| |
| ctx->regs = ioremap(res->start, resource_size(res)); |
| if (!ctx->regs) { |
| dev_err(dev, "failed to map registers\n"); |
| ret = -ENXIO; |
| goto err_req_region_io; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(dev, "irq request failed.\n"); |
| goto err_req_region_irq; |
| } |
| |
| ctx->irq = res->start; |
| |
| ret = request_irq(ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx); |
| if (ret < 0) { |
| dev_err(dev, "irq request failed.\n"); |
| goto err_req_irq; |
| } |
| |
| ctx->clkdiv = fimd_calc_clkdiv(ctx, timing); |
| ctx->vidcon0 = pdata->vidcon0; |
| ctx->vidcon1 = pdata->vidcon1; |
| ctx->default_win = pdata->default_win; |
| ctx->timing = timing; |
| |
| timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv; |
| |
| DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n", |
| timing->pixclock, ctx->clkdiv); |
| |
| subdrv = &ctx->subdrv; |
| |
| subdrv->probe = fimd_subdrv_probe; |
| subdrv->remove = fimd_subdrv_remove; |
| subdrv->manager.pipe = -1; |
| subdrv->manager.ops = &fimd_manager_ops; |
| subdrv->manager.overlay_ops = &fimd_overlay_ops; |
| subdrv->manager.display_ops = &fimd_display_ops; |
| subdrv->manager.dev = dev; |
| |
| mutex_init(&ctx->lock); |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| for (win = 0; win < WINDOWS_NR; win++) |
| fimd_clear_win(ctx, win); |
| |
| exynos_drm_subdrv_register(subdrv); |
| |
| return 0; |
| |
| err_req_irq: |
| err_req_region_irq: |
| iounmap(ctx->regs); |
| |
| err_req_region_io: |
| release_resource(ctx->regs_res); |
| kfree(ctx->regs_res); |
| |
| err_clk: |
| clk_disable(ctx->lcd_clk); |
| clk_put(ctx->lcd_clk); |
| |
| err_bus_clk: |
| clk_disable(ctx->bus_clk); |
| clk_put(ctx->bus_clk); |
| |
| err_clk_get: |
| kfree(ctx); |
| return ret; |
| } |
| |
| static int __devexit fimd_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct fimd_context *ctx = platform_get_drvdata(pdev); |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| exynos_drm_subdrv_unregister(&ctx->subdrv); |
| |
| if (ctx->suspended) |
| goto out; |
| |
| clk_disable(ctx->lcd_clk); |
| clk_disable(ctx->bus_clk); |
| |
| pm_runtime_set_suspended(dev); |
| pm_runtime_put_sync(dev); |
| |
| out: |
| pm_runtime_disable(dev); |
| |
| clk_put(ctx->lcd_clk); |
| clk_put(ctx->bus_clk); |
| |
| iounmap(ctx->regs); |
| release_resource(ctx->regs_res); |
| kfree(ctx->regs_res); |
| free_irq(ctx->irq, ctx); |
| |
| kfree(ctx); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int fimd_suspend(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| |
| if (pm_runtime_suspended(dev)) |
| return 0; |
| |
| /* |
| * do not use pm_runtime_suspend(). if pm_runtime_suspend() is |
| * called here, an error would be returned by that interface |
| * because the usage_count of pm runtime is more than 1. |
| */ |
| return fimd_power_on(ctx, false); |
| } |
| |
| static int fimd_resume(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| |
| /* |
| * if entered to sleep when lcd panel was on, the usage_count |
| * of pm runtime would still be 1 so in this case, fimd driver |
| * should be on directly not drawing on pm runtime interface. |
| */ |
| if (!pm_runtime_suspended(dev)) |
| return fimd_power_on(ctx, true); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int fimd_runtime_suspend(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| return fimd_power_on(ctx, false); |
| } |
| |
| static int fimd_runtime_resume(struct device *dev) |
| { |
| struct fimd_context *ctx = get_fimd_context(dev); |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| return fimd_power_on(ctx, true); |
| } |
| #endif |
| |
| static const struct dev_pm_ops fimd_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(fimd_suspend, fimd_resume) |
| SET_RUNTIME_PM_OPS(fimd_runtime_suspend, fimd_runtime_resume, NULL) |
| }; |
| |
| static struct platform_driver fimd_driver = { |
| .probe = fimd_probe, |
| .remove = __devexit_p(fimd_remove), |
| .driver = { |
| .name = "exynos4-fb", |
| .owner = THIS_MODULE, |
| .pm = &fimd_pm_ops, |
| }, |
| }; |
| |
| static int __init fimd_init(void) |
| { |
| return platform_driver_register(&fimd_driver); |
| } |
| |
| static void __exit fimd_exit(void) |
| { |
| platform_driver_unregister(&fimd_driver); |
| } |
| |
| module_init(fimd_init); |
| module_exit(fimd_exit); |
| |
| MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung DRM FIMD Driver"); |
| MODULE_LICENSE("GPL"); |