| /* |
| * linux/arch/arm/mach-omap1/board-ams-delta.c |
| * |
| * Modified from board-generic.c |
| * |
| * Board specific inits for the Amstrad E3 (codename Delta) videophone |
| * |
| * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/basic_mmio_gpio.h> |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/leds.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/serial_8250.h> |
| #include <linux/export.h> |
| #include <linux/omapfb.h> |
| #include <linux/io.h> |
| #include <linux/platform_data/gpio-omap.h> |
| |
| #include <media/soc_camera.h> |
| |
| #include <asm/serial.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/board-ams-delta.h> |
| #include <linux/platform_data/keypad-omap.h> |
| #include <mach/mux.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/ams-delta-fiq.h> |
| #include <mach/camera.h> |
| #include <mach/usb.h> |
| |
| #include "iomap.h" |
| #include "common.h" |
| |
| static const unsigned int ams_delta_keymap[] = { |
| KEY(0, 0, KEY_F1), /* Advert */ |
| |
| KEY(0, 3, KEY_COFFEE), /* Games */ |
| KEY(0, 2, KEY_QUESTION), /* Directory */ |
| KEY(2, 3, KEY_CONNECT), /* Internet */ |
| KEY(1, 2, KEY_SHOP), /* Services */ |
| KEY(1, 1, KEY_PHONE), /* VoiceMail */ |
| |
| KEY(0, 1, KEY_DELETE), /* Delete */ |
| KEY(2, 2, KEY_PLAY), /* Play */ |
| KEY(1, 0, KEY_PAGEUP), /* Up */ |
| KEY(1, 3, KEY_PAGEDOWN), /* Down */ |
| KEY(2, 0, KEY_EMAIL), /* ReadEmail */ |
| KEY(2, 1, KEY_STOP), /* Stop */ |
| |
| /* Numeric keypad portion */ |
| KEY(0, 7, KEY_KP1), |
| KEY(0, 6, KEY_KP2), |
| KEY(0, 5, KEY_KP3), |
| KEY(1, 7, KEY_KP4), |
| KEY(1, 6, KEY_KP5), |
| KEY(1, 5, KEY_KP6), |
| KEY(2, 7, KEY_KP7), |
| KEY(2, 6, KEY_KP8), |
| KEY(2, 5, KEY_KP9), |
| KEY(3, 6, KEY_KP0), |
| KEY(3, 7, KEY_KPASTERISK), |
| KEY(3, 5, KEY_KPDOT), /* # key */ |
| KEY(7, 2, KEY_NUMLOCK), /* Mute */ |
| KEY(7, 1, KEY_KPMINUS), /* Recall */ |
| KEY(6, 1, KEY_KPPLUS), /* Redial */ |
| KEY(7, 6, KEY_KPSLASH), /* Handsfree */ |
| KEY(6, 0, KEY_ENTER), /* Video */ |
| |
| KEY(7, 4, KEY_CAMERA), /* Photo */ |
| |
| KEY(0, 4, KEY_F2), /* Home */ |
| KEY(1, 4, KEY_F3), /* Office */ |
| KEY(2, 4, KEY_F4), /* Mobile */ |
| KEY(7, 7, KEY_F5), /* SMS */ |
| KEY(7, 5, KEY_F6), /* Email */ |
| |
| /* QWERTY portion of keypad */ |
| KEY(3, 4, KEY_Q), |
| KEY(3, 3, KEY_W), |
| KEY(3, 2, KEY_E), |
| KEY(3, 1, KEY_R), |
| KEY(3, 0, KEY_T), |
| KEY(4, 7, KEY_Y), |
| KEY(4, 6, KEY_U), |
| KEY(4, 5, KEY_I), |
| KEY(4, 4, KEY_O), |
| KEY(4, 3, KEY_P), |
| |
| KEY(4, 2, KEY_A), |
| KEY(4, 1, KEY_S), |
| KEY(4, 0, KEY_D), |
| KEY(5, 7, KEY_F), |
| KEY(5, 6, KEY_G), |
| KEY(5, 5, KEY_H), |
| KEY(5, 4, KEY_J), |
| KEY(5, 3, KEY_K), |
| KEY(5, 2, KEY_L), |
| |
| KEY(5, 1, KEY_Z), |
| KEY(5, 0, KEY_X), |
| KEY(6, 7, KEY_C), |
| KEY(6, 6, KEY_V), |
| KEY(6, 5, KEY_B), |
| KEY(6, 4, KEY_N), |
| KEY(6, 3, KEY_M), |
| KEY(6, 2, KEY_SPACE), |
| |
| KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */ |
| KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ |
| }; |
| |
| #define LATCH1_PHYS 0x01000000 |
| #define LATCH1_VIRT 0xEA000000 |
| #define MODEM_PHYS 0x04000000 |
| #define MODEM_VIRT 0xEB000000 |
| #define LATCH2_PHYS 0x08000000 |
| #define LATCH2_VIRT 0xEC000000 |
| |
| static struct map_desc ams_delta_io_desc[] __initdata = { |
| /* AMS_DELTA_LATCH1 */ |
| { |
| .virtual = LATCH1_VIRT, |
| .pfn = __phys_to_pfn(LATCH1_PHYS), |
| .length = 0x01000000, |
| .type = MT_DEVICE |
| }, |
| /* AMS_DELTA_LATCH2 */ |
| { |
| .virtual = LATCH2_VIRT, |
| .pfn = __phys_to_pfn(LATCH2_PHYS), |
| .length = 0x01000000, |
| .type = MT_DEVICE |
| }, |
| /* AMS_DELTA_MODEM */ |
| { |
| .virtual = MODEM_VIRT, |
| .pfn = __phys_to_pfn(MODEM_PHYS), |
| .length = 0x01000000, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| static struct omap_lcd_config ams_delta_lcd_config __initdata = { |
| .ctrl_name = "internal", |
| }; |
| |
| static struct omap_usb_config ams_delta_usb_config = { |
| .register_host = 1, |
| .hmc_mode = 16, |
| .pins[0] = 2, |
| }; |
| |
| #define LATCH1_GPIO_BASE 232 |
| #define LATCH1_NGPIO 8 |
| |
| static struct resource latch1_resources[] = { |
| [0] = { |
| .name = "dat", |
| .start = LATCH1_PHYS, |
| .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct bgpio_pdata latch1_pdata = { |
| .base = LATCH1_GPIO_BASE, |
| .ngpio = LATCH1_NGPIO, |
| }; |
| |
| static struct platform_device latch1_gpio_device = { |
| .name = "basic-mmio-gpio", |
| .id = 0, |
| .resource = latch1_resources, |
| .num_resources = ARRAY_SIZE(latch1_resources), |
| .dev = { |
| .platform_data = &latch1_pdata, |
| }, |
| }; |
| |
| static struct resource latch2_resources[] = { |
| [0] = { |
| .name = "dat", |
| .start = LATCH2_PHYS, |
| .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct bgpio_pdata latch2_pdata = { |
| .base = AMS_DELTA_LATCH2_GPIO_BASE, |
| .ngpio = AMS_DELTA_LATCH2_NGPIO, |
| }; |
| |
| static struct platform_device latch2_gpio_device = { |
| .name = "basic-mmio-gpio", |
| .id = 1, |
| .resource = latch2_resources, |
| .num_resources = ARRAY_SIZE(latch2_resources), |
| .dev = { |
| .platform_data = &latch2_pdata, |
| }, |
| }; |
| |
| static const struct gpio latch_gpios[] __initconst = { |
| { |
| .gpio = LATCH1_GPIO_BASE + 6, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "dockit1", |
| }, |
| { |
| .gpio = LATCH1_GPIO_BASE + 7, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "dockit2", |
| }, |
| { |
| .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "scard_rstin", |
| }, |
| { |
| .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "scard_cmdvcc", |
| }, |
| { |
| .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "modem_codec", |
| }, |
| { |
| .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "hookflash1", |
| }, |
| { |
| .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, |
| .flags = GPIOF_OUT_INIT_LOW, |
| .label = "hookflash2", |
| }, |
| }; |
| |
| static struct regulator_consumer_supply modem_nreset_consumers[] = { |
| REGULATOR_SUPPLY("RESET#", "serial8250.1"), |
| REGULATOR_SUPPLY("POR", "cx20442-codec"), |
| }; |
| |
| static struct regulator_init_data modem_nreset_data = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| .boot_on = 1, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), |
| .consumer_supplies = modem_nreset_consumers, |
| }; |
| |
| static struct fixed_voltage_config modem_nreset_config = { |
| .supply_name = "modem_nreset", |
| .microvolts = 3300000, |
| .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, |
| .startup_delay = 25000, |
| .enable_high = 1, |
| .enabled_at_boot = 1, |
| .init_data = &modem_nreset_data, |
| }; |
| |
| static struct platform_device modem_nreset_device = { |
| .name = "reg-fixed-voltage", |
| .id = -1, |
| .dev = { |
| .platform_data = &modem_nreset_config, |
| }, |
| }; |
| |
| struct modem_private_data { |
| struct regulator *regulator; |
| }; |
| |
| static struct modem_private_data modem_priv; |
| |
| void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) |
| { |
| int bit = 0; |
| u16 bitpos = 1 << bit; |
| |
| for (; bit < ngpio; bit++, bitpos = bitpos << 1) { |
| if (!(mask & bitpos)) |
| continue; |
| else |
| gpio_set_value(base + bit, (value & bitpos) != 0); |
| } |
| } |
| EXPORT_SYMBOL(ams_delta_latch_write); |
| |
| static struct resource ams_delta_nand_resources[] = { |
| [0] = { |
| .start = OMAP1_MPUIO_BASE, |
| .end = OMAP1_MPUIO_BASE + |
| OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device ams_delta_nand_device = { |
| .name = "ams-delta-nand", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(ams_delta_nand_resources), |
| .resource = ams_delta_nand_resources, |
| }; |
| |
| static struct resource ams_delta_kp_resources[] = { |
| [0] = { |
| .start = INT_KEYBOARD, |
| .end = INT_KEYBOARD, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct matrix_keymap_data ams_delta_keymap_data = { |
| .keymap = ams_delta_keymap, |
| .keymap_size = ARRAY_SIZE(ams_delta_keymap), |
| }; |
| |
| static struct omap_kp_platform_data ams_delta_kp_data = { |
| .rows = 8, |
| .cols = 8, |
| .keymap_data = &ams_delta_keymap_data, |
| .delay = 9, |
| }; |
| |
| static struct platform_device ams_delta_kp_device = { |
| .name = "omap-keypad", |
| .id = -1, |
| .dev = { |
| .platform_data = &ams_delta_kp_data, |
| }, |
| .num_resources = ARRAY_SIZE(ams_delta_kp_resources), |
| .resource = ams_delta_kp_resources, |
| }; |
| |
| static struct platform_device ams_delta_lcd_device = { |
| .name = "lcd_ams_delta", |
| .id = -1, |
| }; |
| |
| static const struct gpio_led gpio_leds[] __initconst = { |
| { |
| .name = "camera", |
| .gpio = LATCH1_GPIO_BASE + 0, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| #ifdef CONFIG_LEDS_TRIGGERS |
| .default_trigger = "ams_delta_camera", |
| #endif |
| }, |
| { |
| .name = "advert", |
| .gpio = LATCH1_GPIO_BASE + 1, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| { |
| .name = "email", |
| .gpio = LATCH1_GPIO_BASE + 2, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| { |
| .name = "handsfree", |
| .gpio = LATCH1_GPIO_BASE + 3, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| { |
| .name = "voicemail", |
| .gpio = LATCH1_GPIO_BASE + 4, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| { |
| .name = "voice", |
| .gpio = LATCH1_GPIO_BASE + 5, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| }; |
| |
| static const struct gpio_led_platform_data leds_pdata __initconst = { |
| .leds = gpio_leds, |
| .num_leds = ARRAY_SIZE(gpio_leds), |
| }; |
| |
| static struct i2c_board_info ams_delta_camera_board_info[] = { |
| { |
| I2C_BOARD_INFO("ov6650", 0x60), |
| }, |
| }; |
| |
| #ifdef CONFIG_LEDS_TRIGGERS |
| DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); |
| |
| static int ams_delta_camera_power(struct device *dev, int power) |
| { |
| /* |
| * turn on camera LED |
| */ |
| if (power) |
| led_trigger_event(ams_delta_camera_led_trigger, LED_FULL); |
| else |
| led_trigger_event(ams_delta_camera_led_trigger, LED_OFF); |
| return 0; |
| } |
| #else |
| #define ams_delta_camera_power NULL |
| #endif |
| |
| static struct soc_camera_link ams_delta_iclink = { |
| .bus_id = 0, /* OMAP1 SoC camera bus */ |
| .i2c_adapter_id = 1, |
| .board_info = &ams_delta_camera_board_info[0], |
| .module_name = "ov6650", |
| .power = ams_delta_camera_power, |
| }; |
| |
| static struct platform_device ams_delta_camera_device = { |
| .name = "soc-camera-pdrv", |
| .id = 0, |
| .dev = { |
| .platform_data = &ams_delta_iclink, |
| }, |
| }; |
| |
| static struct omap1_cam_platform_data ams_delta_camera_platform_data = { |
| .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */ |
| .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ |
| }; |
| |
| static struct platform_device *ams_delta_devices[] __initdata = { |
| &latch1_gpio_device, |
| &latch2_gpio_device, |
| &ams_delta_kp_device, |
| &ams_delta_camera_device, |
| }; |
| |
| static struct platform_device *late_devices[] __initdata = { |
| &ams_delta_nand_device, |
| &ams_delta_lcd_device, |
| }; |
| |
| static void __init ams_delta_init(void) |
| { |
| /* mux pins for uarts */ |
| omap_cfg_reg(UART1_TX); |
| omap_cfg_reg(UART1_RTS); |
| |
| /* parallel camera interface */ |
| omap_cfg_reg(H19_1610_CAM_EXCLK); |
| omap_cfg_reg(J15_1610_CAM_LCLK); |
| omap_cfg_reg(L18_1610_CAM_VS); |
| omap_cfg_reg(L15_1610_CAM_HS); |
| omap_cfg_reg(L19_1610_CAM_D0); |
| omap_cfg_reg(K14_1610_CAM_D1); |
| omap_cfg_reg(K15_1610_CAM_D2); |
| omap_cfg_reg(K19_1610_CAM_D3); |
| omap_cfg_reg(K18_1610_CAM_D4); |
| omap_cfg_reg(J14_1610_CAM_D5); |
| omap_cfg_reg(J19_1610_CAM_D6); |
| omap_cfg_reg(J18_1610_CAM_D7); |
| |
| omap_serial_init(); |
| omap_register_i2c_bus(1, 100, NULL, 0); |
| |
| omap1_usb_init(&ams_delta_usb_config); |
| omap1_set_camera_info(&ams_delta_camera_platform_data); |
| #ifdef CONFIG_LEDS_TRIGGERS |
| led_trigger_register_simple("ams_delta_camera", |
| &ams_delta_camera_led_trigger); |
| #endif |
| gpio_led_register_device(-1, &leds_pdata); |
| platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); |
| |
| ams_delta_init_fiq(); |
| |
| omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); |
| |
| omapfb_set_lcd_config(&ams_delta_lcd_config); |
| } |
| |
| static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) |
| { |
| struct modem_private_data *priv = port->private_data; |
| |
| if (IS_ERR(priv->regulator)) |
| return; |
| |
| if (state == old) |
| return; |
| |
| if (state == 0) |
| regulator_enable(priv->regulator); |
| else if (old == 0) |
| regulator_disable(priv->regulator); |
| } |
| |
| static struct plat_serial8250_port ams_delta_modem_ports[] = { |
| { |
| .membase = IOMEM(MODEM_VIRT), |
| .mapbase = MODEM_PHYS, |
| .irq = -EINVAL, /* changed later */ |
| .flags = UPF_BOOT_AUTOCONF, |
| .irqflags = IRQF_TRIGGER_RISING, |
| .iotype = UPIO_MEM, |
| .regshift = 1, |
| .uartclk = BASE_BAUD * 16, |
| .pm = modem_pm, |
| .private_data = &modem_priv, |
| }, |
| { }, |
| }; |
| |
| static struct platform_device ams_delta_modem_device = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM1, |
| .dev = { |
| .platform_data = ams_delta_modem_ports, |
| }, |
| }; |
| |
| static int __init late_init(void) |
| { |
| int err; |
| |
| if (!machine_is_ams_delta()) |
| return -ENODEV; |
| |
| err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); |
| if (err) { |
| pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); |
| return err; |
| } |
| |
| platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); |
| |
| err = platform_device_register(&modem_nreset_device); |
| if (err) { |
| pr_err("Couldn't register the modem regulator device\n"); |
| return err; |
| } |
| |
| omap_cfg_reg(M14_1510_GPIO2); |
| ams_delta_modem_ports[0].irq = |
| gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); |
| |
| err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem"); |
| if (err) { |
| pr_err("Couldn't request gpio pin for modem\n"); |
| return err; |
| } |
| gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); |
| |
| /* Initialize the modem_nreset regulator consumer before use */ |
| modem_priv.regulator = ERR_PTR(-ENODEV); |
| |
| ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, |
| AMS_DELTA_LATCH2_MODEM_CODEC); |
| |
| err = platform_device_register(&ams_delta_modem_device); |
| if (err) |
| goto gpio_free; |
| |
| /* |
| * Once the modem device is registered, the modem_nreset |
| * regulator can be requested on behalf of that device. |
| */ |
| modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, |
| "RESET#"); |
| if (IS_ERR(modem_priv.regulator)) { |
| err = PTR_ERR(modem_priv.regulator); |
| goto unregister; |
| } |
| return 0; |
| |
| unregister: |
| platform_device_unregister(&ams_delta_modem_device); |
| gpio_free: |
| gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); |
| return err; |
| } |
| |
| static void __init ams_delta_init_late(void) |
| { |
| omap1_init_late(); |
| late_init(); |
| } |
| |
| static void __init ams_delta_map_io(void) |
| { |
| omap15xx_map_io(); |
| iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); |
| } |
| |
| MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") |
| /* Maintainer: Jonathan McDowell <noodles@earth.li> */ |
| .atag_offset = 0x100, |
| .map_io = ams_delta_map_io, |
| .init_early = omap1_init_early, |
| .init_irq = omap1_init_irq, |
| .init_machine = ams_delta_init, |
| .init_late = ams_delta_init_late, |
| .timer = &omap1_timer, |
| .restart = omap1_restart, |
| MACHINE_END |