rtc: add m41t62 support to rtc-m41t80 driver
Compared to the other supported chips, the m41t62 uses a different
register to set the square wave frequency.
Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 893f7de..60fe266 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -64,10 +64,12 @@
#define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */
#define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */
#define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */
+#define M41T80_FEATURE_SQ_ALT (1 << 4) /* RSx bits are in reg 4 */
#define DRV_VERSION "0.05"
static const struct i2c_device_id m41t80_id[] = {
+ { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
{ "m41t80", M41T80_FEATURE_SQ },
{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
@@ -393,12 +395,15 @@
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
- int val;
+ int val, reg_sqw;
if (!(clientdata->features & M41T80_FEATURE_SQ))
return -EINVAL;
- val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
+ reg_sqw = M41T80_REG_SQW;
+ if (clientdata->features & M41T80_FEATURE_SQ_ALT)
+ reg_sqw = M41T80_REG_WDAY;
+ val = i2c_smbus_read_byte_data(client, reg_sqw);
if (val < 0)
return -EIO;
val = (val >> 4) & 0xf;
@@ -419,7 +424,7 @@
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
- int almon, sqw;
+ int almon, sqw, reg_sqw;
int val = simple_strtoul(buf, NULL, 0);
if (!(clientdata->features & M41T80_FEATURE_SQ))
@@ -440,13 +445,16 @@
almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (almon < 0)
return -EIO;
- sqw = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
+ reg_sqw = M41T80_REG_SQW;
+ if (clientdata->features & M41T80_FEATURE_SQ_ALT)
+ reg_sqw = M41T80_REG_WDAY;
+ sqw = i2c_smbus_read_byte_data(client, reg_sqw);
if (sqw < 0)
return -EIO;
sqw = (sqw & 0x0f) | (val << 4);
if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon & ~M41T80_ALMON_SQWE) < 0 ||
- i2c_smbus_write_byte_data(client, M41T80_REG_SQW, sqw) < 0)
+ i2c_smbus_write_byte_data(client, reg_sqw, sqw) < 0)
return -EIO;
if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon | M41T80_ALMON_SQWE) < 0)