mfd: ab8500-core: Hierarchical interrupt registers
Make use of the hierarchical interrupt rergister called
ITLatchHier1 - 3 also for the 8500 platform (currently the
hierarchical interrupt registers are used only for the 8540
and 9540 platforms). This will make the interrupt routing
go faster since fewer i2c reads need to made in the most
common cases.
Signed-off-by: Dariusz Szymczak <dariusz.xd.szymczak@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index caab1fd..c7ff557 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -549,66 +549,6 @@
return IRQ_HANDLED;
}
-/**
- * ab8500_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
- *
- * @ab8500: ab8500_irq controller to operate on.
- * @irq: index of the interrupt requested in the chip IRQs
- *
- * Useful for drivers to request their own IRQs.
- */
-static int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq)
-{
- if (!ab8500)
- return -EINVAL;
-
- return irq_create_mapping(ab8500->domain, irq);
-}
-
-static irqreturn_t ab8500_irq(int irq, void *dev)
-{
- struct ab8500 *ab8500 = dev;
- int i;
-
- dev_vdbg(ab8500->dev, "interrupt\n");
-
- atomic_inc(&ab8500->transfer_ongoing);
-
- for (i = 0; i < ab8500->mask_size; i++) {
- int regoffset = ab8500->irq_reg_offset[i];
- int status;
- u8 value;
-
- /*
- * Interrupt register 12 doesn't exist prior to AB8500 version
- * 2.0
- */
- if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500))
- continue;
-
- if (regoffset < 0)
- continue;
-
- status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_LATCH1_REG + regoffset, &value);
- if (status < 0 || value == 0)
- continue;
-
- do {
- int bit = __ffs(value);
- int line = i * 8 + bit;
- int virq = ab8500_irq_get_virq(ab8500, line);
-
- handle_nested_irq(virq);
- ab8500_debug_register_interrupt(line);
- value &= ~(1 << bit);
-
- } while (value);
- }
- atomic_dec(&ab8500->transfer_ongoing);
- return IRQ_HANDLED;
-}
-
static int ab8500_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hwirq)
{
@@ -1737,22 +1677,12 @@
if (ret)
return ret;
- /* Activate this feature only in ab9540 */
- /* till tests are done on ab8500 1p2 or later*/
- if (is_ab9540(ab8500) || is_ab8540(ab8500))
- ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
- ab8500_hierarchical_irq,
- IRQF_ONESHOT | IRQF_NO_SUSPEND,
- "ab8500", ab8500);
- }
- else {
- ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
- ab8500_irq,
- IRQF_ONESHOT | IRQF_NO_SUSPEND,
- "ab8500", ab8500);
- if (ret)
- return ret;
- }
+ ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
+ ab8500_hierarchical_irq,
+ IRQF_ONESHOT | IRQF_NO_SUSPEND,
+ "ab8500", ab8500);
+ if (ret)
+ return ret;
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,